#ifndef __OMAP_PANEL_DATA_H
#define __OMAP_PANEL_DATA_H
+#include <video/omapdss.h>
+#include <video/display_timing.h>
+
struct omap_dss_device;
/**
int nreset_gpio;
};
+/**
+ * encoder_tfp410 platform data
+ * @name: name for this display entity
+ * @power_down_gpio: gpio number for PD pin (or -1 if not available)
+ * @data_lines: number of DPI datalines
+ */
+struct encoder_tfp410_platform_data {
+ const char *name;
+ const char *source;
+ int power_down_gpio;
+ int data_lines;
+};
+
+/**
+ * encoder_tpd12s015 platform data
+ * @name: name for this display entity
+ * @ct_cp_hpd_gpio: CT_CP_HPD gpio number
+ * @ls_oe_gpio: LS_OE gpio number
+ * @hpd_gpio: HPD gpio number
+ */
+struct encoder_tpd12s015_platform_data {
+ const char *name;
+ const char *source;
+
+ int ct_cp_hpd_gpio;
+ int ls_oe_gpio;
+ int hpd_gpio;
+};
+
+/**
+ * connector_dvi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @i2c_bus_num: i2c bus number to be used for reading EDID
+ */
+struct connector_dvi_platform_data {
+ const char *name;
+ const char *source;
+ int i2c_bus_num;
+};
+
+/**
+ * connector_hdmi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ */
+struct connector_hdmi_platform_data {
+ const char *name;
+ const char *source;
+};
+
+/**
+ * connector_atv platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @connector_type: composite/svideo
+ * @invert_polarity: invert signal polarity
+ */
+struct connector_atv_platform_data {
+ const char *name;
+ const char *source;
+
+ enum omap_dss_venc_type connector_type;
+ bool invert_polarity;
+};
+
+/**
+ * panel_dpi platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @display_timing: timings for this panel
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_dpi_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ const struct display_timing *display_timing;
+
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+/**
+ * panel_dsicm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @use_ext_te: use external TE GPIO
+ * @ext_te_gpio: external TE GPIO
+ * @ulps_timeout: time to wait before entering ULPS, 0 = disabled (ms)
+ * @use_dsi_backlight: true if panel uses DSI command to control backlight
+ * @pin_config: DSI pin configuration
+ */
+struct panel_dsicm_platform_data {
+ const char *name;
+ const char *source;
+
+ int reset_gpio;
+
+ bool use_ext_te;
+ int ext_te_gpio;
+
+ unsigned ulps_timeout;
+
+ bool use_dsi_backlight;
+
+ struct omap_dsi_pin_config pin_config;
+};
+
+/**
+ * panel_acx565akm platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @reset_gpio: gpio to reset the panel (or -1)
+ * @datapairs: number of SDI datapairs
+ */
+struct panel_acx565akm_platform_data {
+ const char *name;
+ const char *source;
+
+ int reset_gpio;
+
+ int datapairs;
+};
+
+/**
+ * panel_lb035q02 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @backlight_gpio: gpio to enable/disable the backlight (or -1)
+ * @enable_gpio: gpio to enable/disable the panel (or -1)
+ */
+struct panel_lb035q02_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int backlight_gpio;
+ int enable_gpio;
+};
+
+/**
+ * panel_sharp_ls037v7dw01 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @resb_gpio: reset signal GPIO
+ * @ini_gpio: power on control GPIO
+ * @mo_gpio: selection for resolution(VGA/QVGA) GPIO
+ * @lr_gpio: selection for horizontal scanning direction GPIO
+ * @ud_gpio: selection for vertical scanning direction GPIO
+ */
+struct panel_sharp_ls037v7dw01_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int resb_gpio;
+ int ini_gpio;
+ int mo_gpio;
+ int lr_gpio;
+ int ud_gpio;
+};
+
+/**
+ * panel-tpo-td043mtea1 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @nreset_gpio: reset signal
+ */
+struct panel_tpo_td043mtea1_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int nreset_gpio;
+};
+
+/**
+ * panel-nec-nl8048hl11 platform data
+ * @name: name for this display entity
+ * @source: name of the display entity used as a video source
+ * @data_lines: number of DPI datalines
+ * @res_gpio: reset signal
+ * @qvga_gpio: selection for resolution(QVGA/WVGA)
+ */
+struct panel_nec_nl8048hl11_platform_data {
+ const char *name;
+ const char *source;
+
+ int data_lines;
+
+ int res_gpio;
+ int qvga_gpio;
+};
+
#endif /* __OMAP_PANEL_DATA_H */
projects / cascardo / linux.git / blobdiff