* Copyright 2005-2006, Devicescape Software, Inc.
* Copyright (c) 2006 Jiri Benc <jbenc@suse.cz>
* Copyright 2008, Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2013-2014 Intel Mobile Communications GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
/* we hold the RTNL here so can safely walk the list */
list_for_each_entry(nsdata, &local->interfaces, list) {
if (nsdata != sdata && ieee80211_sdata_running(nsdata)) {
+ /*
+ * Only OCB and monitor mode may coexist
+ */
+ if ((sdata->vif.type == NL80211_IFTYPE_OCB &&
+ nsdata->vif.type != NL80211_IFTYPE_MONITOR) ||
+ (sdata->vif.type != NL80211_IFTYPE_MONITOR &&
+ nsdata->vif.type == NL80211_IFTYPE_OCB))
+ return -EBUSY;
+
/*
* Allow only a single IBSS interface to be up at any
* time. This is restricted because beacon distribution
case NL80211_IFTYPE_MONITOR:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_P2P_DEVICE:
+ case NL80211_IFTYPE_OCB:
/* no special treatment */
break;
case NL80211_IFTYPE_UNSPECIFIED:
case NL80211_IFTYPE_ADHOC:
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_MESH_POINT:
+ case NL80211_IFTYPE_OCB:
netif_carrier_off(dev);
break;
case NL80211_IFTYPE_WDS:
int i, flushed;
struct ps_data *ps;
struct cfg80211_chan_def chandef;
+ bool cancel_scan;
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
- if (rcu_access_pointer(local->scan_sdata) == sdata)
+ cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata;
+ if (cancel_scan)
ieee80211_scan_cancel(local);
/*
sdata_lock(sdata);
mutex_lock(&local->mtx);
sdata->vif.csa_active = false;
+ if (sdata->vif.type == NL80211_IFTYPE_STATION)
+ sdata->u.mgd.csa_waiting_bcn = false;
if (sdata->csa_block_tx) {
ieee80211_wake_vif_queues(local, sdata,
IEEE80211_QUEUE_STOP_REASON_CSA);
list_del(&sdata->u.vlan.list);
mutex_unlock(&local->mtx);
RCU_INIT_POINTER(sdata->vif.chanctx_conf, NULL);
+ /* see comment in the default case below */
+ ieee80211_free_keys(sdata, true);
/* no need to tell driver */
break;
case NL80211_IFTYPE_MONITOR:
/*
* When we get here, the interface is marked down.
* Free the remaining keys, if there are any
- * (shouldn't be, except maybe in WDS mode?)
+ * (which can happen in AP mode if userspace sets
+ * keys before the interface is operating, and maybe
+ * also in WDS mode)
*
* Force the key freeing to always synchronize_net()
* to wait for the RX path in case it is using this
- * interface enqueuing frames * at this very time on
+ * interface enqueuing frames at this very time on
* another CPU.
*/
ieee80211_free_keys(sdata, true);
-
- /* fall through */
- case NL80211_IFTYPE_AP:
skb_queue_purge(&sdata->skb_queue);
}
ieee80211_recalc_ps(local, -1);
+ if (cancel_scan)
+ flush_delayed_work(&local->scan_work);
+
if (local->open_count == 0) {
ieee80211_stop_device(local);
rx_agg = (void *)&skb->cb;
mutex_lock(&local->sta_mtx);
sta = sta_info_get_bss(sdata, rx_agg->addr);
- if (sta) {
- u16 last_seq;
-
- last_seq = IEEE80211_SEQ_TO_SN(le16_to_cpu(
- sta->last_seq_ctrl[rx_agg->tid]));
-
+ if (sta)
__ieee80211_start_rx_ba_session(sta,
- 0, 0,
- ieee80211_sn_inc(last_seq),
- 1, rx_agg->tid,
+ 0, 0, 0, 1, rx_agg->tid,
IEEE80211_MAX_AMPDU_BUF,
- false);
- }
+ false, true);
mutex_unlock(&local->sta_mtx);
} else if (skb->pkt_type == IEEE80211_SDATA_QUEUE_RX_AGG_STOP) {
rx_agg = (void *)&skb->cb;
break;
ieee80211_mesh_work(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ ieee80211_ocb_work(sdata);
+ break;
default:
break;
}
static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata,
enum nl80211_iftype type)
{
+ static const u8 bssid_wildcard[ETH_ALEN] = {0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff};
+
/* clear type-dependent union */
memset(&sdata->u, 0, sizeof(sdata->u));
sdata->vif.bss_conf.bssid = sdata->u.mgd.bssid;
ieee80211_sta_setup_sdata(sdata);
break;
+ case NL80211_IFTYPE_OCB:
+ sdata->vif.bss_conf.bssid = bssid_wildcard;
+ ieee80211_ocb_setup_sdata(sdata);
+ break;
case NL80211_IFTYPE_ADHOC:
sdata->vif.bss_conf.bssid = sdata->u.ibss.bssid;
ieee80211_ibss_setup_sdata(sdata);
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could maybe also all others here?
* Just not sure how that interacts
case NL80211_IFTYPE_AP:
case NL80211_IFTYPE_STATION:
case NL80211_IFTYPE_ADHOC:
+ case NL80211_IFTYPE_OCB:
/*
* Could probably support everything
* but WDS here (WDS do_open can fail
}
ieee80211_assign_perm_addr(local, ndev->perm_addr, type);
- memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
+ if (params && is_valid_ether_addr(params->macaddr))
+ memcpy(ndev->dev_addr, params->macaddr, ETH_ALEN);
+ else
+ memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN);
SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy));
/* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */
projects / cascardo / linux.git / blobdiff