#ifndef DRIVER_H
#define DRIVER_H
-#include <linux/spinlock.h>
#include <linux/usb.h>
+#include <linux/mutex.h>
+#include <linux/kfifo.h>
#include <sound/core.h>
#include "midi.h"
-#define USB_INTERVALS_PER_SECOND 1000
+/* USB 1.1 speed configuration */
+#define USB_LOW_INTERVALS_PER_SECOND 1000
+#define USB_LOW_ISO_BUFFERS 2
+
+/* USB 2.0+ speed configuration */
+#define USB_HIGH_INTERVALS_PER_SECOND 8000
+#define USB_HIGH_ISO_BUFFERS 16
/* Fallback USB interval and max packet size values */
#define LINE6_FALLBACK_INTERVAL 10
#define LINE6_FALLBACK_MAXPACKETSIZE 16
#define LINE6_TIMEOUT 1
-#define LINE6_BUFSIZE_LISTEN 32
-#define LINE6_MESSAGE_MAXLEN 256
+#define LINE6_BUFSIZE_LISTEN 64
+#define LINE6_MIDI_MESSAGE_MAXLEN 256
+
+#define LINE6_RAW_MESSAGES_MAXCOUNT_ORDER 7
+/* 4k packets are common, BUFSIZE * MAXCOUNT should be bigger... */
+#define LINE6_RAW_MESSAGES_MAXCOUNT (1 << LINE6_RAW_MESSAGES_MAXCOUNT_ORDER)
+
+
+#if LINE6_BUFSIZE_LISTEN > 65535
+#error "Use dynamic fifo instead"
+#endif
/*
Line 6 MIDI control commands
LINE6_CAP_CONTROL = 1 << 0,
/* device supports PCM input/output via USB */
LINE6_CAP_PCM = 1 << 1,
- /* device support hardware monitoring */
+ /* device supports hardware monitoring */
LINE6_CAP_HWMON = 1 << 2,
+ /* device requires output data when input is read */
+ LINE6_CAP_IN_NEEDS_OUT = 1 << 3,
+ /* device uses raw MIDI via USB (data endpoints) */
+ LINE6_CAP_CONTROL_MIDI = 1 << 4,
};
/*
/* Properties */
const struct line6_properties *properties;
- /* Interval (ms) */
+ /* Interval for data USB packets */
int interval;
+ /* ...for isochronous transfers framing */
+ int intervals_per_second;
+
+ /* Number of isochronous URBs used for frame transfers */
+ int iso_buffers;
- /* Maximum size of USB packet */
+ /* Maximum size of data USB packet */
int max_packet_size;
/* Device representing the USB interface */
/* Line 6 MIDI device data structure */
struct snd_line6_midi *line6midi;
- /* URB for listening to PODxt Pro control endpoint */
+ /* URB for listening to POD data endpoint */
struct urb *urb_listen;
- /* Buffer for listening to PODxt Pro control endpoint */
+ /* Buffer for incoming data from POD data endpoint */
unsigned char *buffer_listen;
- /* Buffer for message to be processed */
+ /* Buffer for message to be processed, generated from MIDI layer */
unsigned char *buffer_message;
- /* Length of message to be processed */
+ /* Length of message to be processed, generated from MIDI layer */
int message_length;
+ /* Circular buffer for non-MIDI control messages */
+ struct {
+ struct mutex read_lock;
+ wait_queue_head_t wait_queue;
+ unsigned int active:1;
+ STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT)
+ fifo;
+ } messages;
+
+ /* If MIDI is supported, buffer_message contains the pre-processed data;
+ * otherwise the data is only in urb_listen (buffer_incoming).
+ */
void (*process_message)(struct usb_line6 *);
void (*disconnect)(struct usb_line6 *line6);
};