X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fserial%2FKconfig;h=f55c49475a8cdd307ebb11bdfb275b5f1b7dc3d0;hb=d7bbf7f50e03c427debb6d7d960c48b9b934e7e2;hp=888a0ce91c4be4a7eb064893f8d24d83570b4c08;hpb=0e064caf6402d1d67db4233d26beec88ca212919;p=cascardo%2Flinux.git

diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig
index 888a0ce91c4b..f55c49475a8c 100644
--- a/drivers/serial/Kconfig
+++ b/drivers/serial/Kconfig
@@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE
 
 config SERIAL_SAMSUNG
 	tristate "Samsung SoC serial support"
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	select SERIAL_CORE
 	help
 	  Support for the on-chip UARTs on the Samsung S3C24XX series CPUs,
@@ -455,11 +455,18 @@ config SERIAL_SAMSUNG
 	  provide all of these ports, depending on how the serial port
 	  pins are configured.
 
+config SERIAL_SAMSUNG_UARTS_4
+	bool
+	depends on ARM && PLAT_SAMSUNG
+	default y if CPU_S3C2443
+	help
+	  Internal node for the common case of 4 Samsung compatible UARTs
+
 config SERIAL_SAMSUNG_UARTS
 	int
-	depends on ARM && PLAT_S3C
+	depends on ARM && PLAT_SAMSUNG
 	default 2 if ARCH_S3C2400
-	default 4 if ARCH_S5PC1XX || ARCH_S3C64XX || CPU_S3C2443
+	default 4 if SERIAL_SAMSUNG_UARTS_4
 	default 3
 	help
 	  Select the number of available UART ports for the Samsung S3C
@@ -526,20 +533,30 @@ config SERIAL_S3C24A0
 	  Serial port support for the Samsung S3C24A0 SoC
 
 config SERIAL_S3C6400
-	tristate "Samsung S3C6400/S3C6410 Serial port support"
-	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410)
+	tristate "Samsung S3C6400/S3C6410/S5P6440 Seria port support"
+	depends on SERIAL_SAMSUNG && (CPU_S3C6400 || CPU_S3C6410 || CPU_S5P6440)
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
-	  Serial port support for the Samsung S3C6400 and S3C6410
+	  Serial port support for the Samsung S3C6400, S3C6410 and S5P6440
 	  SoCs
 
 config SERIAL_S5PC100
 	tristate "Samsung S5PC100 Serial port support"
 	depends on SERIAL_SAMSUNG && CPU_S5PC100
+	select SERIAL_SAMSUNG_UARTS_4
 	default y
 	help
 	  Serial port support for the Samsung S5PC100 SoCs
 
+config SERIAL_S5PV210
+	tristate "Samsung S5PV210 Serial port support"
+	depends on SERIAL_SAMSUNG && (CPU_S5PV210 || CPU_S5P6442)
+	select SERIAL_SAMSUNG_UARTS_4 if CPU_S5PV210
+	default y
+	help
+	  Serial port support for Samsung's S5P Family of SoC's
+
 config SERIAL_MAX3100
 	tristate "MAX3100 support"
 	depends on SPI
@@ -996,7 +1013,7 @@ config SERIAL_IP22_ZILOG_CONSOLE
 
 config SERIAL_SH_SCI
 	tristate "SuperH SCI(F) serial port support"
-	depends on HAVE_CLK && (SUPERH || H8300)
+	depends on HAVE_CLK && (SUPERH || H8300 || ARCH_SHMOBILE)
 	select SERIAL_CORE
 
 config SERIAL_SH_SCI_NR_UARTS
@@ -1009,6 +1026,10 @@ config SERIAL_SH_SCI_CONSOLE
 	depends on SERIAL_SH_SCI=y
 	select SERIAL_CORE_CONSOLE
 
+config SERIAL_SH_SCI_DMA
+	bool "DMA support"
+	depends on SERIAL_SH_SCI && SH_DMAE && EXPERIMENTAL
+
 config SERIAL_PNX8XXX
 	bool "Enable PNX8XXX SoCs' UART Support"
 	depends on MIPS && (SOC_PNX8550 || SOC_PNX833X)
@@ -1418,42 +1439,37 @@ config SERIAL_BFIN_SPORT
 	  To compile this driver as a module, choose M here: the
 	  module will be called bfin_sport_uart.
 
-choice
-	prompt "Baud rate for Blackfin SPORT UART"
-	depends on SERIAL_BFIN_SPORT
-	default SERIAL_SPORT_BAUD_RATE_57600
-	help
-	  Choose a baud rate for the SPORT UART, other uart settings are
-	  8 bit, 1 stop bit, no parity, no flow control.
-
-config SERIAL_SPORT_BAUD_RATE_115200
-	bool "115200"
-
-config SERIAL_SPORT_BAUD_RATE_57600
-	bool "57600"
+config SERIAL_BFIN_SPORT_CONSOLE
+	bool "Console on Blackfin sport emulated uart"
+	depends on SERIAL_BFIN_SPORT=y
+	select SERIAL_CORE_CONSOLE
 
-config SERIAL_SPORT_BAUD_RATE_38400
-	bool "38400"
+config SERIAL_BFIN_SPORT0_UART
+	bool "Enable UART over SPORT0"
+	depends on SERIAL_BFIN_SPORT && !(BF542 || BF542M || BF544 || BF544M)
+	help
+	  Enable UART over SPORT0
 
-config SERIAL_SPORT_BAUD_RATE_19200
-	bool "19200"
+config SERIAL_BFIN_SPORT1_UART
+	bool "Enable UART over SPORT1"
+	depends on SERIAL_BFIN_SPORT
+	help
+	  Enable UART over SPORT1
 
-config SERIAL_SPORT_BAUD_RATE_9600
-	bool "9600"
-endchoice
+config SERIAL_BFIN_SPORT2_UART
+	bool "Enable UART over SPORT2"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT2
 
-config SPORT_BAUD_RATE
-	int
-	depends on SERIAL_BFIN_SPORT
-	default 115200 if (SERIAL_SPORT_BAUD_RATE_115200)
-	default 57600 if (SERIAL_SPORT_BAUD_RATE_57600)
-	default 38400 if (SERIAL_SPORT_BAUD_RATE_38400)
-	default 19200 if (SERIAL_SPORT_BAUD_RATE_19200)
-	default 9600 if (SERIAL_SPORT_BAUD_RATE_9600)
+config SERIAL_BFIN_SPORT3_UART
+	bool "Enable UART over SPORT3"
+	depends on SERIAL_BFIN_SPORT && (BF54x || BF538 || BF539)
+	help
+	  Enable UART over SPORT3
 
 config SERIAL_TIMBERDALE
 	tristate "Support for timberdale UART"
-	depends on MFD_TIMBERDALE
 	select SERIAL_CORE
 	---help---
 	Add support for UART controller on timberdale.