X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;ds=sidebyside;f=drivers%2Fthermal%2FKconfig;h=a13541bdc726899807dd8723c92c21312fbc6439;hb=e9f8f48bcac6f6dd37ad89ad63d1d1a497332313;hp=2d702ca6556f5b6185a95ec007ada7b124226272;hpb=0df88121fb56d7ab902335c05292346fbe0acd06;p=cascardo%2Flinux.git

diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 2d702ca6556f..a13541bdc726 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -186,7 +186,7 @@ config HISI_THERMAL
 
 config IMX_THERMAL
 	tristate "Temperature sensor driver for Freescale i.MX SoCs"
-	depends on CPU_THERMAL
+	depends on (ARCH_MXC && CPU_THERMAL) || COMPILE_TEST
 	depends on MFD_SYSCON
 	depends on OF
 	help
@@ -195,6 +195,26 @@ config IMX_THERMAL
 	  cpufreq is used as the cooling device to throttle CPUs when the
 	  passive trip is crossed.
 
+config MAX77620_THERMAL
+	tristate "Temperature sensor driver for Maxim MAX77620 PMIC"
+	depends on MFD_MAX77620
+	depends on OF
+	help
+	  Support for die junction temperature warning alarm for Maxim
+	  Semiconductor PMIC MAX77620 device. Device generates two alarm
+	  interrupts when PMIC die temperature cross the threshold of
+	  120 degC and 140 degC.
+
+config QORIQ_THERMAL
+	tristate "QorIQ Thermal Monitoring Unit"
+	depends on THERMAL_OF
+	depends on HAS_IOMEM
+	help
+	  Support for Thermal Monitoring Unit (TMU) found on QorIQ platforms.
+	  It supports one critical trip point and one passive trip point. The
+	  cpufreq is used as the cooling device to throttle CPUs when the
+	  passive trip is crossed.
+
 config SPEAR_THERMAL
 	tristate "SPEAr thermal sensor driver"
 	depends on PLAT_SPEAR || COMPILE_TEST
@@ -332,6 +352,16 @@ menu "ACPI INT340X thermal drivers"
 source drivers/thermal/int340x_thermal/Kconfig
 endmenu
 
+config INTEL_BXT_PMIC_THERMAL
+	tristate "Intel Broxton PMIC thermal driver"
+	depends on X86 && INTEL_SOC_PMIC && REGMAP
+	help
+	  Select this driver for Intel Broxton PMIC with ADC channels monitoring
+	  system temperature measurements and alerts.
+	  This driver is used for monitoring the ADC channels of PMIC and handles
+	  the alert trip point interrupts and notifies the thermal framework with
+	  the trip point and temperature details of the zone.
+
 config INTEL_PCH_THERMAL
 	tristate "Intel PCH Thermal Reporting Driver"
 	depends on X86 && PCI
@@ -399,4 +429,9 @@ config GENERIC_ADC_THERMAL
 	  to this driver. This driver reports the temperature by reading ADC
 	  channel and converts it to temperature based on lookup table.
 
+menu "Qualcomm thermal drivers"
+depends on (ARCH_QCOM && OF) || COMPILE_TEST
+source "drivers/thermal/qcom/Kconfig"
+endmenu
+
 endif