X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;f=arch%2Farm%2Fboot%2Fdts%2Fexynos5422-odroidxu3-common.dtsi;h=d56253049ccbca83d0e1d146fc75fec26ece0643;hb=8fe9c8b750ca294882b163100817f97866990481;hp=2a4e10bc88012cfd976a205f6c8f0b81f9c788ee;hpb=28165ec7a99be98123aa89540bf2cfc24df19498;p=cascardo%2Flinux.git

diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
index 2a4e10bc8801..d56253049ccb 100644
--- a/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
+++ b/arch/arm/boot/dts/exynos5422-odroidxu3-common.dtsi
@@ -1,9 +1,11 @@
 /*
  * Hardkernel Odroid XU3 board device tree source
  *
- * Copyright (c) 2014 Collabora Ltd.
  * Copyright (c) 2013 Samsung Electronics Co., Ltd.
  *		http://www.samsung.com
+ * Copyright (c) 2014 Collabora Ltd.
+ * Copyright (c) 2015 Lukasz Majewski <l.majewski@samsung.com>
+ *                    Anand Moon <linux.amoon@gmail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -16,7 +18,7 @@
 #include <dt-bindings/sound/samsung-i2s.h>
 #include "exynos5800.dtsi"
 #include "exynos5422-cpus.dtsi"
-#include "exynos5422-cpu-thermal.dtsi"
+#include "exynos-mfc-reserved-memory.dtsi"
 
 / {
 	memory {
@@ -54,6 +56,94 @@
 		#cooling-cells = <2>;
 		cooling-levels = <0 130 170 230>;
 	};
+
+	thermal-zones {
+		cpu0_thermal: cpu0-thermal {
+			thermal-sensors = <&tmu_cpu0 0>;
+			polling-delay-passive = <250>;
+			polling-delay = <0>;
+			trips {
+				cpu_alert0: cpu-alert-0 {
+					temperature = <50000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert1: cpu-alert-1 {
+					temperature = <60000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_alert2: cpu-alert-2 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <5000>; /* millicelsius */
+					type = "active";
+				};
+				cpu_crit0: cpu-crit-0 {
+					temperature = <120000>; /* millicelsius */
+					hysteresis = <0>; /* millicelsius */
+					type = "critical";
+				};
+				/*
+				 * Exynos542x supports only 4 trip-points
+				 * so for these polling mode is required.
+				 * Start polling at temperature level of last
+				 * interrupt-driven trip: cpu_alert2
+				 */
+				cpu_alert3: cpu-alert-3 {
+					temperature = <70000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+				cpu_alert4: cpu-alert-4 {
+					temperature = <85000>; /* millicelsius */
+					hysteresis = <10000>; /* millicelsius */
+					type = "passive";
+				};
+
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device = <&fan0 0 1>;
+				};
+				map1 {
+					trip = <&cpu_alert1>;
+					cooling-device = <&fan0 1 2>;
+				};
+				map2 {
+					trip = <&cpu_alert2>;
+					cooling-device = <&fan0 2 3>;
+				};
+				/*
+				 * When reaching cpu_alert3, reduce CPU
+				 * by 2 steps. On Exynos5422/5800 that would
+				 * be: 1600 MHz and 1100 MHz.
+				 */
+				map3 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu0 0 2>;
+				};
+				map4 {
+					trip = <&cpu_alert3>;
+					cooling-device = <&cpu4 0 2>;
+				};
+
+				/*
+				 * When reaching cpu_alert4, reduce CPU
+				 * further, down to 600 MHz (11 steps for big,
+				 * 7 steps for LITTLE).
+				 */
+				map5 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu0 3 7>;
+				};
+				map6 {
+					trip = <&cpu_alert4>;
+					cooling-device = <&cpu4 3 11>;
+				};
+			};
+		};
+	};
 };
 
 &bus_wcore {
@@ -405,11 +495,6 @@
 	};
 };
 
-&mfc {
-	samsung,mfc-r = <0x43000000 0x800000>;
-	samsung,mfc-l = <0x51000000 0x800000>;
-};
-
 &mmc_0 {
 	status = "okay";
 	mmc-pwrseq = <&emmc_pwrseq>;
@@ -487,27 +572,22 @@
 
 &tmu_cpu0 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu1 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu2 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_cpu3 {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &tmu_gpu {
 	vtmu-supply = <&ldo7_reg>;
-	status = "okay";
 };
 
 &rtc {