X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;f=drivers%2Fcpufreq%2Fintel_pstate.c;h=6c7cff13f0ed4df73c3c8d8f898b5623600d07ef;hb=4b42fafc1cdc4aba38d4f147cb2f3f1a32cd4a15;hp=4b644526fd5977943761d5430e1967d26997567d;hpb=11caf57f6a4b8e380001548b8af0a3ae3f7b4354;p=cascardo%2Flinux.git diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 4b644526fd59..6c7cff13f0ed 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -64,6 +64,25 @@ static inline int ceiling_fp(int32_t x) return ret; } +/** + * struct sample - Store performance sample + * @core_pct_busy: Ratio of APERF/MPERF in percent, which is actual + * performance during last sample period + * @busy_scaled: Scaled busy value which is used to calculate next + * P state. This can be different than core_pct_busy + * to account for cpu idle period + * @aperf: Difference of actual performance frequency clock count + * read from APERF MSR between last and current sample + * @mperf: Difference of maximum performance frequency clock count + * read from MPERF MSR between last and current sample + * @tsc: Difference of time stamp counter between last and + * current sample + * @freq: Effective frequency calculated from APERF/MPERF + * @time: Current time from scheduler + * + * This structure is used in the cpudata structure to store performance sample + * data for choosing next P State. + */ struct sample { int32_t core_pct_busy; int32_t busy_scaled; @@ -74,6 +93,20 @@ struct sample { u64 time; }; +/** + * struct pstate_data - Store P state data + * @current_pstate: Current requested P state + * @min_pstate: Min P state possible for this platform + * @max_pstate: Max P state possible for this platform + * @max_pstate_physical:This is physical Max P state for a processor + * This can be higher than the max_pstate which can + * be limited by platform thermal design power limits + * @scaling: Scaling factor to convert frequency to cpufreq + * frequency units + * @turbo_pstate: Max Turbo P state possible for this platform + * + * Stores the per cpu model P state limits and current P state. + */ struct pstate_data { int current_pstate; int min_pstate; @@ -83,6 +116,19 @@ struct pstate_data { int turbo_pstate; }; +/** + * struct vid_data - Stores voltage information data + * @min: VID data for this platform corresponding to + * the lowest P state + * @max: VID data corresponding to the highest P State. + * @turbo: VID data for turbo P state + * @ratio: Ratio of (vid max - vid min) / + * (max P state - Min P State) + * + * Stores the voltage data for DVFS (Dynamic Voltage and Frequency Scaling) + * This data is used in Atom platforms, where in addition to target P state, + * the voltage data needs to be specified to select next P State. + */ struct vid_data { int min; int max; @@ -90,6 +136,18 @@ struct vid_data { int32_t ratio; }; +/** + * struct _pid - Stores PID data + * @setpoint: Target set point for busyness or performance + * @integral: Storage for accumulated error values + * @p_gain: PID proportional gain + * @i_gain: PID integral gain + * @d_gain: PID derivative gain + * @deadband: PID deadband + * @last_err: Last error storage for integral part of PID calculation + * + * Stores PID coefficients and last error for PID controller. + */ struct _pid { int setpoint; int32_t integral; @@ -100,6 +158,23 @@ struct _pid { int32_t last_err; }; +/** + * struct cpudata - Per CPU instance data storage + * @cpu: CPU number for this instance data + * @update_util: CPUFreq utility callback information + * @pstate: Stores P state limits for this CPU + * @vid: Stores VID limits for this CPU + * @pid: Stores PID parameters for this CPU + * @last_sample_time: Last Sample time + * @prev_aperf: Last APERF value read from APERF MSR + * @prev_mperf: Last MPERF value read from MPERF MSR + * @prev_tsc: Last timestamp counter (TSC) value + * @prev_cummulative_iowait: IO Wait time difference from last and + * current sample + * @sample: Storage for storing last Sample data + * + * This structure stores per CPU instance data for all CPUs. + */ struct cpudata { int cpu; @@ -118,6 +193,19 @@ struct cpudata { }; static struct cpudata **all_cpu_data; + +/** + * struct pid_adjust_policy - Stores static PID configuration data + * @sample_rate_ms: PID calculation sample rate in ms + * @sample_rate_ns: Sample rate calculation in ns + * @deadband: PID deadband + * @setpoint: PID Setpoint + * @p_gain_pct: PID proportional gain + * @i_gain_pct: PID integral gain + * @d_gain_pct: PID derivative gain + * + * Stores per CPU model static PID configuration data. + */ struct pstate_adjust_policy { int sample_rate_ms; s64 sample_rate_ns; @@ -128,6 +216,20 @@ struct pstate_adjust_policy { int i_gain_pct; }; +/** + * struct pstate_funcs - Per CPU model specific callbacks + * @get_max: Callback to get maximum non turbo effective P state + * @get_max_physical: Callback to get maximum non turbo physical P state + * @get_min: Callback to get minimum P state + * @get_turbo: Callback to get turbo P state + * @get_scaling: Callback to get frequency scaling factor + * @get_val: Callback to convert P state to actual MSR write value + * @get_vid: Callback to get VID data for Atom platforms + * @get_target_pstate: Callback to a function to calculate next P state to use + * + * Core and Atom CPU models have different way to get P State limits. This + * structure is used to store those callbacks. + */ struct pstate_funcs { int (*get_max)(void); int (*get_max_physical)(void); @@ -139,6 +241,11 @@ struct pstate_funcs { int32_t (*get_target_pstate)(struct cpudata *); }; +/** + * struct cpu_defaults- Per CPU model default config data + * @pid_policy: PID config data + * @funcs: Callback function data + */ struct cpu_defaults { struct pstate_adjust_policy pid_policy; struct pstate_funcs funcs; @@ -151,6 +258,34 @@ static struct pstate_adjust_policy pid_params; static struct pstate_funcs pstate_funcs; static int hwp_active; + +/** + * struct perf_limits - Store user and policy limits + * @no_turbo: User requested turbo state from intel_pstate sysfs + * @turbo_disabled: Platform turbo status either from msr + * MSR_IA32_MISC_ENABLE or when maximum available pstate + * matches the maximum turbo pstate + * @max_perf_pct: Effective maximum performance limit in percentage, this + * is minimum of either limits enforced by cpufreq policy + * or limits from user set limits via intel_pstate sysfs + * @min_perf_pct: Effective minimum performance limit in percentage, this + * is maximum of either limits enforced by cpufreq policy + * or limits from user set limits via intel_pstate sysfs + * @max_perf: This is a scaled value between 0 to 255 for max_perf_pct + * This value is used to limit max pstate + * @min_perf: This is a scaled value between 0 to 255 for min_perf_pct + * This value is used to limit min pstate + * @max_policy_pct: The maximum performance in percentage enforced by + * cpufreq setpolicy interface + * @max_sysfs_pct: The maximum performance in percentage enforced by + * intel pstate sysfs interface + * @min_policy_pct: The minimum performance in percentage enforced by + * cpufreq setpolicy interface + * @min_sysfs_pct: The minimum performance in percentage enforced by + * intel pstate sysfs interface + * + * Storage for user and policy defined limits. + */ struct perf_limits { int no_turbo; int turbo_disabled; @@ -910,7 +1045,14 @@ static inline bool intel_pstate_sample(struct cpudata *cpu, u64 time) cpu->prev_aperf = aperf; cpu->prev_mperf = mperf; cpu->prev_tsc = tsc; - return true; + /* + * First time this function is invoked in a given cycle, all of the + * previous sample data fields are equal to zero or stale and they must + * be populated with meaningful numbers for things to work, so assume + * that sample.time will always be reset before setting the utilization + * update hook and make the caller skip the sample then. + */ + return !!cpu->last_sample_time; } static inline int32_t get_avg_frequency(struct cpudata *cpu) @@ -984,8 +1126,7 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu) * enough period of time to adjust our busyness. */ duration_ns = cpu->sample.time - cpu->last_sample_time; - if ((s64)duration_ns > pid_params.sample_rate_ns * 3 - && cpu->last_sample_time > 0) { + if ((s64)duration_ns > pid_params.sample_rate_ns * 3) { sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns), int_tofp(duration_ns)); core_busy = mul_fp(core_busy, sample_ratio); @@ -1100,10 +1241,6 @@ static int intel_pstate_init_cpu(unsigned int cpunum) intel_pstate_get_cpu_pstates(cpu); intel_pstate_busy_pid_reset(cpu); - intel_pstate_sample(cpu, 0); - - cpu->update_util.func = intel_pstate_update_util; - cpufreq_set_update_util_data(cpunum, &cpu->update_util); pr_debug("intel_pstate: controlling: cpu %d\n", cpunum); @@ -1122,22 +1259,55 @@ static unsigned int intel_pstate_get(unsigned int cpu_num) return get_avg_frequency(cpu); } +static void intel_pstate_set_update_util_hook(unsigned int cpu_num) +{ + struct cpudata *cpu = all_cpu_data[cpu_num]; + + /* Prevent intel_pstate_update_util() from using stale data. */ + cpu->sample.time = 0; + cpufreq_add_update_util_hook(cpu_num, &cpu->update_util, + intel_pstate_update_util); +} + +static void intel_pstate_clear_update_util_hook(unsigned int cpu) +{ + cpufreq_remove_update_util_hook(cpu); + synchronize_sched(); +} + +static void intel_pstate_set_performance_limits(struct perf_limits *limits) +{ + limits->no_turbo = 0; + limits->turbo_disabled = 0; + limits->max_perf_pct = 100; + limits->max_perf = int_tofp(1); + limits->min_perf_pct = 100; + limits->min_perf = int_tofp(1); + limits->max_policy_pct = 100; + limits->max_sysfs_pct = 100; + limits->min_policy_pct = 0; + limits->min_sysfs_pct = 0; +} + static int intel_pstate_set_policy(struct cpufreq_policy *policy) { if (!policy->cpuinfo.max_freq) return -ENODEV; - if (policy->policy == CPUFREQ_POLICY_PERFORMANCE && - policy->max >= policy->cpuinfo.max_freq) { - pr_debug("intel_pstate: set performance\n"); + intel_pstate_clear_update_util_hook(policy->cpu); + + if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) { limits = &performance_limits; - if (hwp_active) - intel_pstate_hwp_set(policy->cpus); - return 0; + if (policy->max >= policy->cpuinfo.max_freq) { + pr_debug("intel_pstate: set performance\n"); + intel_pstate_set_performance_limits(limits); + goto out; + } + } else { + pr_debug("intel_pstate: set powersave\n"); + limits = &powersave_limits; } - pr_debug("intel_pstate: set powersave\n"); - limits = &powersave_limits; limits->min_policy_pct = (policy->min * 100) / policy->cpuinfo.max_freq; limits->min_policy_pct = clamp_t(int, limits->min_policy_pct, 0 , 100); limits->max_policy_pct = DIV_ROUND_UP(policy->max * 100, @@ -1163,6 +1333,9 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy) limits->max_perf = div_fp(int_tofp(limits->max_perf_pct), int_tofp(100)); + out: + intel_pstate_set_update_util_hook(policy->cpu); + if (hwp_active) intel_pstate_hwp_set(policy->cpus); @@ -1187,8 +1360,7 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy) pr_debug("intel_pstate: CPU %d exiting\n", cpu_num); - cpufreq_set_update_util_data(cpu_num, NULL); - synchronize_sched(); + intel_pstate_clear_update_util_hook(cpu_num); if (hwp_active) return; @@ -1455,8 +1627,7 @@ out: get_online_cpus(); for_each_online_cpu(cpu) { if (all_cpu_data[cpu]) { - cpufreq_set_update_util_data(cpu, NULL); - synchronize_sched(); + intel_pstate_clear_update_util_hook(cpu); kfree(all_cpu_data[cpu]); } }