X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;f=drivers%2Fnet%2Fwireless%2Fiwlwifi%2Fiwl-eeprom.h;h=8994b5b23593f15ee071a7735ea18b3c5f9cf5f2;hb=1fcfe76a760e78d7774a254608557c84071b0cfb;hp=d9b590625ae4eb16ba996d0bbd8d794acc30dae9;hpb=18cb657ca1bafe635f368346a1676fb04c512edf;p=cascardo%2Flinux.git

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index d9b590625ae4..8994b5b23593 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -110,9 +110,18 @@ enum {
 };
 
 /* SKU Capabilities */
+/* 3945 only */
 #define EEPROM_SKU_CAP_SW_RF_KILL_ENABLE                (1 << 0)
 #define EEPROM_SKU_CAP_HW_RF_KILL_ENABLE                (1 << 1)
 
+/* 5000 and up */
+#define EEPROM_SKU_CAP_BAND_POS				(4)
+#define EEPROM_SKU_CAP_BAND_SELECTION	                \
+		(3 << EEPROM_SKU_CAP_BAND_POS)
+#define EEPROM_SKU_CAP_11N_ENABLE	                (1 << 6)
+#define EEPROM_SKU_CAP_AMT_ENABLE	                (1 << 7)
+#define EEPROM_SKU_CAP_IPAN_ENABLE	                (1 << 8)
+
 /* *regulatory* channel data format in eeprom, one for each channel.
  * There are separate entries for HT40 (40 MHz) vs. normal (20 MHz) channels. */
 struct iwl_eeprom_channel {
@@ -120,6 +129,17 @@ struct iwl_eeprom_channel {
 	s8 max_power_avg;	/* max power (dBm) on this chnl, limit 31 */
 } __packed;
 
+enum iwl_eeprom_enhanced_txpwr_flags {
+	IWL_EEPROM_ENH_TXP_FL_VALID		= BIT(0),
+	IWL_EEPROM_ENH_TXP_FL_BAND_52G		= BIT(1),
+	IWL_EEPROM_ENH_TXP_FL_OFDM		= BIT(2),
+	IWL_EEPROM_ENH_TXP_FL_40MHZ		= BIT(3),
+	IWL_EEPROM_ENH_TXP_FL_HT_AP		= BIT(4),
+	IWL_EEPROM_ENH_TXP_FL_RES1		= BIT(5),
+	IWL_EEPROM_ENH_TXP_FL_RES2		= BIT(6),
+	IWL_EEPROM_ENH_TXP_FL_COMMON_TYPE	= BIT(7),
+};
+
 /**
  * iwl_eeprom_enhanced_txpwr structure
  *    This structure presents the enhanced regulatory tx power limit layout
@@ -127,21 +147,23 @@ struct iwl_eeprom_channel {
  *    Enhanced regulatory tx power portion of eeprom image can be broken down
  *    into individual structures; each one is 8 bytes in size and contain the
  *    following information
- * @common: (desc + channel) not used by driver, should _NOT_ be "zero"
+ * @flags: entry flags
+ * @channel: channel number
  * @chain_a_max_pwr: chain a max power in 1/2 dBm
  * @chain_b_max_pwr: chain b max power in 1/2 dBm
  * @chain_c_max_pwr: chain c max power in 1/2 dBm
- * @reserved: not used, should be "zero"
+ * @delta_20_in_40: 20-in-40 deltas (hi/lo)
  * @mimo2_max_pwr: mimo2 max power in 1/2 dBm
  * @mimo3_max_pwr: mimo3 max power in 1/2 dBm
  *
  */
 struct iwl_eeprom_enhanced_txpwr {
-	__le16 common;
+	u8 flags;
+	u8 channel;
 	s8 chain_a_max;
 	s8 chain_b_max;
 	s8 chain_c_max;
-	s8 reserved;
+	u8 delta_20_in_40;
 	s8 mimo2_max;
 	s8 mimo3_max;
 } __packed;
@@ -186,6 +208,8 @@ struct iwl_eeprom_enhanced_txpwr {
 #define EEPROM_LINK_CALIBRATION      (2*0x67)
 #define EEPROM_LINK_PROCESS_ADJST    (2*0x68)
 #define EEPROM_LINK_OTHERS           (2*0x69)
+#define EEPROM_LINK_TXP_LIMIT        (2*0x6a)
+#define EEPROM_LINK_TXP_LIMIT_SIZE   (2*0x6b)
 
 /* agn regulatory - indirect access */
 #define EEPROM_REG_BAND_1_CHANNELS       ((0x08)\
@@ -389,6 +413,8 @@ struct iwl_eeprom_calib_info {
 #define INDIRECT_CALIBRATION        0x00040000
 #define INDIRECT_PROCESS_ADJST      0x00050000
 #define INDIRECT_OTHERS             0x00060000
+#define INDIRECT_TXP_LIMIT          0x00070000
+#define INDIRECT_TXP_LIMIT_SIZE     0x00080000
 #define INDIRECT_ADDRESS            0x00100000
 
 /* General */
@@ -397,11 +423,10 @@ struct iwl_eeprom_calib_info {
 #define EEPROM_BOARD_REVISION               (2*0x35)	/* 2  bytes */
 #define EEPROM_BOARD_PBA_NUMBER             (2*0x3B+1)	/* 9  bytes */
 #define EEPROM_VERSION                      (2*0x44)	/* 2  bytes */
-#define EEPROM_SKU_CAP                      (2*0x45)	/* 1  bytes */
+#define EEPROM_SKU_CAP                      (2*0x45)	/* 2  bytes */
 #define EEPROM_OEM_MODE                     (2*0x46)	/* 2  bytes */
 #define EEPROM_WOWLAN_MODE                  (2*0x47)	/* 2  bytes */
 #define EEPROM_RADIO_CONFIG                 (2*0x48)	/* 2  bytes */
-#define EEPROM_3945_M_VERSION               (2*0x4A)	/* 1  bytes */
 #define EEPROM_NUM_MAC_ADDRESS              (2*0x4C)	/* 2  bytes */
 
 /* The following masks are to be applied on EEPROM_RADIO_CONFIG */
@@ -504,6 +529,7 @@ struct iwl_eeprom_ops {
 int iwl_eeprom_init(struct iwl_priv *priv);
 void iwl_eeprom_free(struct iwl_priv *priv);
 int  iwl_eeprom_check_version(struct iwl_priv *priv);
+int  iwl_eeprom_check_sku(struct iwl_priv *priv);
 const u8 *iwl_eeprom_query_addr(const struct iwl_priv *priv, size_t offset);
 int iwlcore_eeprom_verify_signature(struct iwl_priv *priv);
 u16 iwl_eeprom_query16(const struct iwl_priv *priv, size_t offset);