X-Git-Url: http://git.cascardo.info/?a=blobdiff_plain;f=drivers%2Fspi%2FKconfig;h=756b5b3ca2008240b01bfbd365eacdb0c008bafd;hb=b1ad487c42e982bb30f10bfb267f71c5daa3a0d5;hp=581ee2a8856b157641eb5a6b2c13389241b4ea90;hpb=15eeb2e925c091b999195d0102ac39a271dbcb7e;p=cascardo%2Flinux.git

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 581ee2a8856b..756b5b3ca200 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -150,7 +150,7 @@ config SPI_BUTTERFLY
 
 config SPI_CLPS711X
 	tristate "CLPS711X host SPI controller"
-	depends on ARCH_CLPS711X
+	depends on ARCH_CLPS711X || COMPILE_TEST
 	help
 	  This enables dedicated general purpose SPI/Microwire1-compatible
 	  master mode interface (SSI1) for CLPS711X-based CPUs.
@@ -212,7 +212,6 @@ config SPI_IMX
 	tristate "Freescale i.MX SPI controllers"
 	depends on ARCH_MXC || COMPILE_TEST
 	select SPI_BITBANG
-	default m if IMX_HAVE_PLATFORM_SPI_IMX
 	help
 	  This enables using the Freescale i.MX SPI controllers in master
 	  mode.
@@ -270,6 +269,7 @@ config SPI_FSL_SPI
 config SPI_FSL_DSPI
 	tristate "Freescale DSPI controller"
 	select SPI_BITBANG
+	select REGMAP_MMIO
 	depends on SOC_VF610 || COMPILE_TEST
 	help
 	  This enables support for the Freescale DSPI controller in master
@@ -307,7 +307,7 @@ config SPI_OMAP_UWIRE
 
 config SPI_OMAP24XX
 	tristate "McSPI driver for OMAP"
-	depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SH
+	depends on ARM || ARM64 || AVR32 || HEXAGON || MIPS || SUPERH
 	depends on ARCH_OMAP2PLUS || COMPILE_TEST
 	help
 	  SPI master controller for OMAP24XX and later Multichannel SPI
@@ -381,6 +381,19 @@ config SPI_RSPI
 	help
 	  SPI driver for Renesas RSPI and QSPI blocks.
 
+config SPI_QUP
+	tristate "Qualcomm SPI controller with QUP interface"
+	depends on ARCH_MSM_DT || (ARM && COMPILE_TEST)
+	help
+	  Qualcomm Universal Peripheral (QUP) core is an AHB slave that
+	  provides a common data path (an output FIFO and an input FIFO)
+	  for serial peripheral interface (SPI) mini-core. SPI in master
+	  mode supports up to 50MHz, up to four chip selects, programmable
+	  data path from 4 bits to 32 bits and numerous protocol variants.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called spi_qup.
+
 config SPI_S3C24XX
 	tristate "Samsung S3C24XX series SPI"
 	depends on ARCH_S3C24XX
@@ -416,7 +429,6 @@ config SPI_SH_MSIOF
 	tristate "SuperH MSIOF SPI controller"
 	depends on HAVE_CLK
 	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
-	select SPI_BITBANG
 	help
 	  SPI driver for SuperH and SH Mobile MSIOF blocks.
 
@@ -446,6 +458,19 @@ config SPI_SIRF
 	help
 	  SPI driver for CSR SiRFprimaII SoCs
 
+config SPI_SUN4I
+	tristate "Allwinner A10 SoCs SPI controller"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	help
+	  SPI driver for Allwinner sun4i, sun5i and sun7i SoCs
+
+config SPI_SUN6I
+	tristate "Allwinner A31 SPI controller"
+	depends on ARCH_SUNXI || COMPILE_TEST
+	depends on RESET_CONTROLLER
+	help
+	  This enables using the SPI controller on the Allwinner A31 SoCs.
+
 config SPI_MXS
 	tristate "Freescale MXS SPI controller"
 	depends on ARCH_MXS
@@ -478,13 +503,6 @@ config SPI_TEGRA20_SLINK
 	help
 	  SPI driver for Nvidia Tegra20/Tegra30 SLINK Controller interface.
 
-config SPI_TI_SSP
-	tristate "TI Sequencer Serial Port - SPI Support"
-	depends on MFD_TI_SSP
-	help
-	  This selects an SPI master implementation using a TI sequencer
-	  serial port.
-
 config SPI_TOPCLIFF_PCH
 	tristate "Intel EG20T PCH/LAPIS Semicon IOH(ML7213/ML7223/ML7831) SPI"
 	depends on PCI
@@ -546,7 +564,7 @@ config SPI_DW_MID_DMA
 
 config SPI_DW_MMIO
 	tristate "Memory-mapped io interface driver for DW SPI core"
-	depends on SPI_DESIGNWARE && HAVE_CLK
+	depends on SPI_DESIGNWARE
 
 #
 # There are lots of SPI device types, with sensors and memory