The multi-component patch(commit
f0fba2ad1) moved the allocation of the
register cache from the driver to the ASoC core. Most drivers where adjusted to
this, but the wm8955 driver still uses its own register cache for its
private functions, while functions from the ASoC core use the generic cache.
Thus we end up with two from each other incoherent caches, which can lead to
undefined behaviour.
This patch fixes the issue by changing the wm8955 driver to use the
generic register cache in its private functions.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@kernel.org (for 2.6.37 only)
struct wm8955_priv {
enum snd_soc_control_type control_type;
struct wm8955_priv {
enum snd_soc_control_type control_type;
- u16 reg_cache[WM8955_MAX_REGISTER + 1];
-
unsigned int mclk_rate;
int deemph;
unsigned int mclk_rate;
int deemph;
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
enum snd_soc_bias_level level)
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
switch (level) {
int ret, i;
switch (level) {
/* Sync back cached values if they're
* different from the hardware default.
*/
/* Sync back cached values if they're
* different from the hardware default.
*/
- for (i = 0; i < ARRAY_SIZE(wm8955->reg_cache); i++) {
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
if (i == WM8955_RESET)
continue;
if (i == WM8955_RESET)
continue;
- if (wm8955->reg_cache[i] == wm8955_reg[i])
+ if (reg_cache[i] == wm8955_reg[i])
- snd_soc_write(codec, i, wm8955->reg_cache[i]);
+ snd_soc_write(codec, i, reg_cache[i]);
}
/* Enable VREF and VMID */
}
/* Enable VREF and VMID */
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
{
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
struct wm8955_pdata *pdata = dev_get_platdata(codec->dev);
+ u16 *reg_cache = codec->reg_cache;
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
int ret, i;
ret = snd_soc_codec_set_cache_io(codec, 7, 9, wm8955->control_type);
}
/* Change some default settings - latch VU and enable ZC */
}
/* Change some default settings - latch VU and enable ZC */
- wm8955->reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
- wm8955->reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
- wm8955->reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
- wm8955->reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
- wm8955->reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
- wm8955->reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
- wm8955->reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
+ reg_cache[WM8955_LEFT_DAC_VOLUME] |= WM8955_LDVU;
+ reg_cache[WM8955_RIGHT_DAC_VOLUME] |= WM8955_RDVU;
+ reg_cache[WM8955_LOUT1_VOLUME] |= WM8955_LO1VU | WM8955_LO1ZC;
+ reg_cache[WM8955_ROUT1_VOLUME] |= WM8955_RO1VU | WM8955_RO1ZC;
+ reg_cache[WM8955_LOUT2_VOLUME] |= WM8955_LO2VU | WM8955_LO2ZC;
+ reg_cache[WM8955_ROUT2_VOLUME] |= WM8955_RO2VU | WM8955_RO2ZC;
+ reg_cache[WM8955_MONOOUT_VOLUME] |= WM8955_MOZC;
/* Also enable adaptive bass boost by default */
/* Also enable adaptive bass boost by default */
- wm8955->reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
+ reg_cache[WM8955_BASS_CONTROL] |= WM8955_BB;
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
/* Set platform data values */
if (pdata) {
if (pdata->out2_speaker)
- wm8955->reg_cache[WM8955_ADDITIONAL_CONTROL_2]
+ reg_cache[WM8955_ADDITIONAL_CONTROL_2]
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
|= WM8955_ROUT2INV;
if (pdata->monoin_diff)
- wm8955->reg_cache[WM8955_MONO_OUT_MIX_1]
+ reg_cache[WM8955_MONO_OUT_MIX_1]