ARM: dts: kirkwood: gpio-leds fixes for linkstation ls-wvl/vl

The GPIOs controlling the LEDs, listed below, are active high, not low:
  - gpio-leds: "lswvl:red:alarm" pin
  - gpio-leds: "lswvl:red:func" pin
  - gpio-leds: "lswvl:amber:info" pin
  - gpio-leds: "lswvl:blue:func" pin
  - gpio-leds: "lswvl:red:hdderr{0,1}" pin

Fixes: c43379e150aa ("ARM: dts: add buffalo linkstation ls-wvl/vl")
Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

diff --git a/arch/arm/boot/dts/kirkwood-lswvl.dts b/arch/arm/boot/dts/kirkwood-lswvl.dts
index 28fd9ab..36eec73 100644 (file)
--- a/arch/arm/boot/dts/kirkwood-lswvl.dts
+++ b/arch/arm/boot/dts/kirkwood-lswvl.dts
@@ -186,22 +186,22 @@
 
                led@1 {
                        label = "lswvl:red:alarm";
-                       gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
                };
 
                led@2 {
                        label = "lswvl:red:func";
-                       gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
                };
 
                led@3 {
                        label = "lswvl:amber:info";
-                       gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
                };
 
                led@4 {
                        label = "lswvl:blue:func";
-                       gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
                };
 
                led@5 {
@@ -212,12 +212,12 @@
 
                led@6 {
                        label = "lswvl:red:hdderr0";
-                       gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
                };
 
                led@7 {
                        label = "lswvl:red:hdderr1";
-                       gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
+                       gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
                };
        };