serial/atmel: Use the rs485 functions on serial_core

In order to unify all the rs485 ioctl handling.
Use the implementation of TIOC[GS]RS485 ioctl handling on serial_core.

Reviewed-by: Alan Cox <alan@linux.intel.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c
index b1d61dc..80c4bfc 100644 (file)
--- a/drivers/tty/serial/atmel_serial.c
+++ b/drivers/tty/serial/atmel_serial.c
@@ -167,7 +167,6 @@ struct atmel_uart_port {
 
        struct circ_buf         rx_ring;
 
-       struct serial_rs485     rs485;          /* rs485 settings */
        struct mctrl_gpios      *gpios;
        int                     gpio_irq[UART_GPIO_MAX];
        unsigned int            tx_done_mask;
@@ -290,7 +289,8 @@ static unsigned int atmel_get_lines_status(struct uart_port *port)
 }
 
 /* Enable or disable the rs485 support */
-void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
+static int atmel_config_rs485(struct uart_port *port,
+                             struct serial_rs485 *rs485conf)
 {
        struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
        unsigned int mode;
@@ -306,7 +306,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
        /* Resetting serial mode to RS232 (0x0) */
        mode &= ~ATMEL_US_USMODE;
 
-       atmel_port->rs485 = *rs485conf;
+       port->rs485 = *rs485conf;
 
        if (rs485conf->flags & SER_RS485_ENABLED) {
                dev_dbg(port->dev, "Setting UART to RS485\n");
@@ -329,6 +329,7 @@ void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
 
        spin_unlock_irqrestore(&port->lock, flags);
 
+       return 0;
 }
 
 /*
@@ -372,11 +373,10 @@ static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
        /* Resetting serial mode to RS232 (0x0) */
        mode &= ~ATMEL_US_USMODE;
 
-       if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+       if (port->rs485.flags & SER_RS485_ENABLED) {
                dev_dbg(port->dev, "Setting UART to RS485\n");
-               if ((atmel_port->rs485.delay_rts_after_send) > 0)
-                       UART_PUT_TTGR(port,
-                                       atmel_port->rs485.delay_rts_after_send);
+               if ((port->rs485.delay_rts_after_send) > 0)
+                       UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
                mode |= ATMEL_US_USMODE_RS485;
        } else {
                dev_dbg(port->dev, "Setting UART to RS232\n");
@@ -423,8 +423,8 @@ static void atmel_stop_tx(struct uart_port *port)
        /* Disable interrupts */
        UART_PUT_IDR(port, atmel_port->tx_done_mask);
 
-       if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
-           !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
+       if ((port->rs485.flags & SER_RS485_ENABLED) &&
+           !(port->rs485.flags & SER_RS485_RX_DURING_TX))
                atmel_start_rx(port);
 }
 
@@ -441,8 +441,8 @@ static void atmel_start_tx(struct uart_port *port)
                           really need this.*/
                        return;
 
-               if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
-                   !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
+               if ((port->rs485.flags & SER_RS485_ENABLED) &&
+                   !(port->rs485.flags & SER_RS485_RX_DURING_TX))
                        atmel_stop_rx(port);
 
                /* re-enable PDC transmit */
@@ -807,7 +807,7 @@ static void atmel_tx_dma(struct uart_port *port)
                atmel_port->cookie_tx = dmaengine_submit(desc);
 
        } else {
-               if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
+               if (port->rs485.flags & SER_RS485_ENABLED) {
                        /* DMA done, stop TX, start RX for RS485 */
                        atmel_start_rx(port);
                }
@@ -1254,8 +1254,8 @@ static void atmel_tx_pdc(struct uart_port *port)
                /* Enable interrupts */
                UART_PUT_IER(port, atmel_port->tx_done_mask);
        } else {
-               if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
-                   !(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX)) {
+               if ((port->rs485.flags & SER_RS485_ENABLED) &&
+                   !(port->rs485.flags & SER_RS485_RX_DURING_TX)) {
                        /* DMA done, stop TX, start RX for RS485 */
                        atmel_start_rx(port);
                }
@@ -1566,7 +1566,7 @@ static int atmel_init_property(struct atmel_uart_port *atmel_port,
        return 0;
 }
 
-static void atmel_init_rs485(struct atmel_uart_port *atmel_port,
+static void atmel_init_rs485(struct uart_port *port,
                                struct platform_device *pdev)
 {
        struct device_node *np = pdev->dev.of_node;
@@ -1577,7 +1577,7 @@ static void atmel_init_rs485(struct atmel_uart_port *atmel_port,
                /* rs485 properties */
                if (of_property_read_u32_array(np, "rs485-rts-delay",
                                        rs485_delay, 2) == 0) {
-                       struct serial_rs485 *rs485conf = &atmel_port->rs485;
+                       struct serial_rs485 *rs485conf = &port->rs485;
 
                        rs485conf->delay_rts_before_send = rs485_delay[0];
                        rs485conf->delay_rts_after_send = rs485_delay[1];
@@ -1591,7 +1591,7 @@ static void atmel_init_rs485(struct atmel_uart_port *atmel_port,
                        rs485conf->flags |= SER_RS485_ENABLED;
                }
        } else {
-               atmel_port->rs485       = pdata->rs485;
+               port->rs485       = pdata->rs485;
        }
 
 }
@@ -1927,7 +1927,6 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
 {
        unsigned long flags;
        unsigned int mode, imr, quot, baud;
-       struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
 
        /* Get current mode register */
        mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
@@ -2029,10 +2028,9 @@ static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
        /* Resetting serial mode to RS232 (0x0) */
        mode &= ~ATMEL_US_USMODE;
 
-       if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
-               if ((atmel_port->rs485.delay_rts_after_send) > 0)
-                       UART_PUT_TTGR(port,
-                                       atmel_port->rs485.delay_rts_after_send);
+       if (port->rs485.flags & SER_RS485_ENABLED) {
+               if ((port->rs485.delay_rts_after_send) > 0)
+                       UART_PUT_TTGR(port, port->rs485.delay_rts_after_send);
                mode |= ATMEL_US_USMODE_RS485;
        }
 
@@ -2171,35 +2169,6 @@ static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
 }
 #endif
 
-static int
-atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
-{
-       struct serial_rs485 rs485conf;
-
-       switch (cmd) {
-       case TIOCSRS485:
-               if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
-                                       sizeof(rs485conf)))
-                       return -EFAULT;
-
-               atmel_config_rs485(port, &rs485conf);
-               break;
-
-       case TIOCGRS485:
-               if (copy_to_user((struct serial_rs485 *) arg,
-                                       &(to_atmel_uart_port(port)->rs485),
-                                       sizeof(rs485conf)))
-                       return -EFAULT;
-               break;
-
-       default:
-               return -ENOIOCTLCMD;
-       }
-       return 0;
-}
-
-
-
 static struct uart_ops atmel_pops = {
        .tx_empty       = atmel_tx_empty,
        .set_mctrl      = atmel_set_mctrl,
@@ -2220,7 +2189,6 @@ static struct uart_ops atmel_pops = {
        .config_port    = atmel_config_port,
        .verify_port    = atmel_verify_port,
        .pm             = atmel_serial_pm,
-       .ioctl          = atmel_ioctl,
 #ifdef CONFIG_CONSOLE_POLL
        .poll_get_char  = atmel_poll_get_char,
        .poll_put_char  = atmel_poll_put_char,
@@ -2240,7 +2208,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
        if (!atmel_init_property(atmel_port, pdev))
                atmel_set_ops(port);
 
-       atmel_init_rs485(atmel_port, pdev);
+       atmel_init_rs485(port, pdev);
 
        port->iotype            = UPIO_MEM;
        port->flags             = UPF_BOOT_AUTOCONF;
@@ -2249,6 +2217,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
        port->dev               = &pdev->dev;
        port->mapbase   = pdev->resource[0].start;
        port->irq       = pdev->resource[1].start;
+       port->rs485_config      = atmel_config_rs485;
 
        tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
                        (unsigned long)port);
@@ -2283,7 +2252,7 @@ static int atmel_init_port(struct atmel_uart_port *atmel_port,
        }
 
        /* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
-       if (atmel_port->rs485.flags & SER_RS485_ENABLED)
+       if (port->rs485.flags & SER_RS485_ENABLED)
                atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
        else if (atmel_use_pdc_tx(port)) {
                port->fifosize = PDC_BUFFER_SIZE;
@@ -2629,7 +2598,7 @@ static int atmel_serial_probe(struct platform_device *pdev)
        device_init_wakeup(&pdev->dev, 1);
        platform_set_drvdata(pdev, port);
 
-       if (port->rs485.flags & SER_RS485_ENABLED) {
+       if (port->uart.rs485.flags & SER_RS485_ENABLED) {
                UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
                UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
        }