ARM: DT: imx53: fix lvds channel 1 port

using LVDS channel 1 on an i.MX53 leads to following error:

imx-ldb 53fa8008.ldb: unable to set di0 parent clock to ldb_di1

This comes from imx_ldb_set_clock with mux = 0. Mux parameter must be "1" for
reparenting di1 clock to ldb_di1. The value of the mux param comes from device
tree port settings.

On i.MX5, the internal two-input-multiplexer is used. Due to hardware limitations,
only one port (port@[0,1]) can be used for each channel (lvds-channel@[0,1],
respectively)

Documentation update suggested by Philipp Zabel <p.zabel@pengutronix.de>

Signed-off-by: Markus Niebel <Markus.Niebel@tq-group.com>
Fixes: e05c8c9a790a ("ARM: dts: imx53: Add IPU DI ports and endpoints, move imx-drm node to dtsi")
Cc: <stable@vger.kernel.org>
Acked-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

diff --git a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
index 578a1fc..443bcb6 100644 (file)
--- a/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
+++ b/Documentation/devicetree/bindings/staging/imx-drm/ldb.txt
@@ -56,6 +56,9 @@ Required properties:
  - fsl,data-width : should be <18> or <24>
  - port: A port node with endpoint definitions as defined in
    Documentation/devicetree/bindings/media/video-interfaces.txt.
+   On i.MX5, the internal two-input-multiplexer is used.
+   Due to hardware limitations, only one port (port@[0,1])
+   can be used for each channel (lvds-channel@[0,1], respectively)
    On i.MX6, there should be four ports (port@[0-3]) that correspond
    to the four LVDS multiplexer inputs.
 
@@ -78,6 +81,8 @@ ldb: ldb@53fa8008 {
                      "di0", "di1";
 
        lvds-channel@0 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                reg = <0>;
                fsl,data-mapping = "spwg";
                fsl,data-width = <24>;
@@ -86,7 +91,9 @@ ldb: ldb@53fa8008 {
                        /* ... */
                };
 
-               port {
+               port@0 {
+                       reg = <0>;
+
                        lvds0_in: endpoint {
                                remote-endpoint = <&ipu_di0_lvds0>;
                        };
@@ -94,6 +101,8 @@ ldb: ldb@53fa8008 {
        };
 
        lvds-channel@1 {
+               #address-cells = <1>;
+               #size-cells = <0>;
                reg = <1>;
                fsl,data-mapping = "spwg";
                fsl,data-width = <24>;
@@ -102,7 +111,9 @@ ldb: ldb@53fa8008 {
                        /* ... */
                };
 
-               port {
+               port@1 {
+                       reg = <1>;
+
                        lvds1_in: endpoint {
                                remote-endpoint = <&ipu_di1_lvds1>;
                        };

diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi
index c6c58c1..6b675a0 100644 (file)
--- a/arch/arm/boot/dts/imx53.dtsi
+++ b/arch/arm/boot/dts/imx53.dtsi
@@ -423,10 +423,14 @@
                                status = "disabled";
 
                                lvds-channel@0 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
                                        reg = <0>;
                                        status = "disabled";
 
-                                       port {
+                                       port@0 {
+                                               reg = <0>;
+
                                                lvds0_in: endpoint {
                                                        remote-endpoint = <&ipu_di0_lvds0>;
                                                };
@@ -434,10 +438,14 @@
                                };
 
                                lvds-channel@1 {
+                                       #address-cells = <1>;
+                                       #size-cells = <0>;
                                        reg = <1>;
                                        status = "disabled";
 
-                                       port {
+                                       port@1 {
+                                               reg = <1>;
+
                                                lvds1_in: endpoint {
                                                        remote-endpoint = <&ipu_di1_lvds1>;
                                                };