experience, the following books are good for, if anything, reference:
- "The C Programming Language" by Kernighan and Ritchie [Prentice Hall]
- "Practical C Programming" by Steve Oualline [O'Reilly]
+ - "C: A Reference Manual" by Harbison and Steele [Prentice Hall]
The kernel is written using GNU C and the GNU toolchain. While it
adheres to the ISO C89 standard, it uses a number of extensions that are
---------------------------
+<<<<<<< test:Documentation/feature-removal-schedule.txt
What: ACPI hotkey driver (CONFIG_ACPI_HOTKEY)
When: 2.6.21
Why: hotkey.c was an attempt to consolidate multiple drivers that use
the BIOS can be extracted and disassembled with acpidump
and iasl as documented in the pmtools package here:
http://ftp.kernel.org/pub/linux/kernel/people/lenb/acpi/utils
-
Who: Len Brown <len.brown@intel.com>
---------------------------
+What: ACPI procfs interface
+When: July 2007
+Why: After ACPI sysfs conversion, ACPI attributes will be duplicated
+ in sysfs and the ACPI procfs interface should be removed.
+Who: Zhang Rui <rui.zhang@intel.com>
+
+---------------------------
+
What: /proc/acpi/button
When: August 2007
Why: /proc/acpi/button has been replaced by events to the input layer
Who: Jeff Garzik <jeff@garzik.org>
---------------------------
+
+What: sk98lin network driver
+When: July 2007
+Why: In kernel tree version of driver is unmaintained. Sk98lin driver
+ replaced by the skge driver.
+Who: Stephen Hemminger <shemminger@osdl.org>
+
r3 argument 1 / return value 1 (if long long) call-clobbered
r4 argument 2 call-clobbered
r5 argument 3 call-clobbered
-r6 argument 5 saved
+r6 argument 4 saved
r7 pointer-to arguments 5 to ... saved
r8 this & that saved
r9 this & that saved
Interface descriptor info (can be multiple per Config):
-I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
-| | | | | | | |__Driver name
-| | | | | | | or "(none)"
-| | | | | | |__InterfaceProtocol
-| | | | | |__InterfaceSubClass
-| | | | |__InterfaceClass
-| | | |__NumberOfEndpoints
-| | |__AlternateSettingNumber
-| |__InterfaceNumber
+I:* If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=ssss
+| | | | | | | | |__Driver name
+| | | | | | | | or "(none)"
+| | | | | | | |__InterfaceProtocol
+| | | | | | |__InterfaceSubClass
+| | | | | |__InterfaceClass
+| | | | |__NumberOfEndpoints
+| | | |__AlternateSettingNumber
+| | |__InterfaceNumber
+| |__ "*" indicates the active altsetting (others are " ")
|__Interface info tag
A given interface may have one or more "alternate" settings.
on how to do this.)
The Interface lines can be used to determine what driver is
-being used for each device.
+being used for each device, and which altsetting it activated.
The Configuration lines could be used to list maximum power
(in milliamps) that a system's USB devices are using.
The '1t' type data consists of a stream of events, such as URB submission,
URB callback, submission error. Every event is a text line, which consists
-of whitespace separated words. The number of position of words may depend
+of whitespace separated words. The number or position of words may depend
on the event type, but there is a set of words, common for all types.
Here is the list of words, from left to right:
* Raw binary format and API
-TBD
+The overall architecture of the API is about the same as the one above,
+only the events are delivered in binary format. Each event is sent in
+the following structure (its name is made up, so that we can refer to it):
+
+struct usbmon_packet {
+ u64 id; /* 0: URB ID - from submission to callback */
+ unsigned char type; /* 8: Same as text; extensible. */
+ unsigned char xfer_type; /* ISO (0), Intr, Control, Bulk (3) */
+ unsigned char epnum; /* Endpoint number and transfer direction */
+ unsigned char devnum; /* Device address */
+ u16 busnum; /* 12: Bus number */
+ char flag_setup; /* 14: Same as text */
+ char flag_data; /* 15: Same as text; Binary zero is OK. */
+ s64 ts_sec; /* 16: gettimeofday */
+ s32 ts_usec; /* 24: gettimeofday */
+ int status; /* 28: */
+ unsigned int length; /* 32: Length of data (submitted or actual) */
+ unsigned int len_cap; /* 36: Delivered length */
+ unsigned char setup[8]; /* 40: Only for Control 'S' */
+}; /* 48 bytes total */
+
+These events can be received from a character device by reading with read(2),
+with an ioctl(2), or by accessing the buffer with mmap.
+
+The character device is usually called /dev/usbmonN, where N is the USB bus
+number. Number zero (/dev/usbmon0) is special and means "all buses".
+However, this feature is not implemented yet. Note that specific naming
+policy is set by your Linux distribution.
+
+If you create /dev/usbmon0 by hand, make sure that it is owned by root
+and has mode 0600. Otherwise, unpriviledged users will be able to snoop
+keyboard traffic.
+
+The following ioctl calls are available, with MON_IOC_MAGIC 0x92:
+
+ MON_IOCQ_URB_LEN, defined as _IO(MON_IOC_MAGIC, 1)
+
+This call returns the length of data in the next event. Note that majority of
+events contain no data, so if this call returns zero, it does not mean that
+no events are available.
+
+ MON_IOCG_STATS, defined as _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
+
+The argument is a pointer to the following structure:
+
+struct mon_bin_stats {
+ u32 queued;
+ u32 dropped;
+};
+
+The member "queued" refers to the number of events currently queued in the
+buffer (and not to the number of events processed since the last reset).
+
+The member "dropped" is the number of events lost since the last call
+to MON_IOCG_STATS.
+
+ MON_IOCT_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 4)
+
+This call sets the buffer size. The argument is the size in bytes.
+The size may be rounded down to the next chunk (or page). If the requested
+size is out of [unspecified] bounds for this kernel, the call fails with
+-EINVAL.
+
+ MON_IOCQ_RING_SIZE, defined as _IO(MON_IOC_MAGIC, 5)
+
+This call returns the current size of the buffer in bytes.
+
+ MON_IOCX_GET, defined as _IOW(MON_IOC_MAGIC, 6, struct mon_get_arg)
+
+This call waits for events to arrive if none were in the kernel buffer,
+then returns the first event. Its argument is a pointer to the following
+structure:
+
+struct mon_get_arg {
+ struct usbmon_packet *hdr;
+ void *data;
+ size_t alloc; /* Length of data (can be zero) */
+};
+
+Before the call, hdr, data, and alloc should be filled. Upon return, the area
+pointed by hdr contains the next event structure, and the data buffer contains
+the data, if any. The event is removed from the kernel buffer.
+
+ MON_IOCX_MFETCH, defined as _IOWR(MON_IOC_MAGIC, 7, struct mon_mfetch_arg)
+
+This ioctl is primarily used when the application accesses the buffer
+with mmap(2). Its argument is a pointer to the following structure:
+
+struct mon_mfetch_arg {
+ uint32_t *offvec; /* Vector of events fetched */
+ uint32_t nfetch; /* Number of events to fetch (out: fetched) */
+ uint32_t nflush; /* Number of events to flush */
+};
+
+The ioctl operates in 3 stages.
+
+First, it removes and discards up to nflush events from the kernel buffer.
+The actual number of events discarded is returned in nflush.
+
+Second, it waits for an event to be present in the buffer, unless the pseudo-
+device is open with O_NONBLOCK.
+
+Third, it extracts up to nfetch offsets into the mmap buffer, and stores
+them into the offvec. The actual number of event offsets is stored into
+the nfetch.
+
+ MON_IOCH_MFLUSH, defined as _IO(MON_IOC_MAGIC, 8)
+
+This call removes a number of events from the kernel buffer. Its argument
+is the number of events to remove. If the buffer contains fewer events
+than requested, all events present are removed, and no error is reported.
+This works when no events are available too.
+
+ FIONBIO
+
+The ioctl FIONBIO may be implemented in the future, if there's a need.
+
+In addition to ioctl(2) and read(2), the special file of binary API can
+be polled with select(2) and poll(2). But lseek(2) does not work.
+
+* Memory-mapped access of the kernel buffer for the binary API
+
+The basic idea is simple:
+
+To prepare, map the buffer by getting the current size, then using mmap(2).
+Then, execute a loop similar to the one written in pseudo-code below:
+
+ struct mon_mfetch_arg fetch;
+ struct usbmon_packet *hdr;
+ int nflush = 0;
+ for (;;) {
+ fetch.offvec = vec; // Has N 32-bit words
+ fetch.nfetch = N; // Or less than N
+ fetch.nflush = nflush;
+ ioctl(fd, MON_IOCX_MFETCH, &fetch); // Process errors, too
+ nflush = fetch.nfetch; // This many packets to flush when done
+ for (i = 0; i < nflush; i++) {
+ hdr = (struct ubsmon_packet *) &mmap_area[vec[i]];
+ if (hdr->type == '@') // Filler packet
+ continue;
+ caddr_t data = &mmap_area[vec[i]] + 64;
+ process_packet(hdr, data);
+ }
+ }
+
+Thus, the main idea is to execute only one ioctl per N events.
+
+Although the buffer is circular, the returned headers and data do not cross
+the end of the buffer, so the above pseudo-code does not need any gathering.
--- /dev/null
+
+ Video Output Switcher Control
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ 2006 luming.yu@intel.com
+
+The output sysfs class driver provides an abstract video output layer that
+can be used to hook platform specific methods to enable/disable video output
+device through common sysfs interface. For example, on my IBM ThinkPad T42
+laptop, The ACPI video driver registered its output devices and read/write
+method for 'state' with output sysfs class. The user interface under sysfs is:
+
+linux:/sys/class/video_output # tree .
+.
+|-- CRT0
+| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+| |-- state
+| |-- subsystem -> ../../../class/video_output
+| `-- uevent
+|-- DVI0
+| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+| |-- state
+| |-- subsystem -> ../../../class/video_output
+| `-- uevent
+|-- LCD0
+| |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+| |-- state
+| |-- subsystem -> ../../../class/video_output
+| `-- uevent
+`-- TV0
+ |-- device -> ../../../devices/pci0000:00/0000:00:01.0
+ |-- state
+ |-- subsystem -> ../../../class/video_output
+ `-- uevent
+
W: http://xf.iksaif.net/acpi4asus
S: Maintained
+ASUS LAPTOP EXTRAS DRIVER
+P: Corentin Chary
+M: corentincj@iksaif.net
+L: acpi4asus-user@lists.sourceforge.net
+W: http://sourceforge.net/projects/acpi4asus
+W: http://xf.iksaif.net/acpi4asus
+S: Maintained
+
ATA OVER ETHERNET DRIVER
P: Ed L. Cashin
M: ecashin@coraid.com
W: http://www.coraid.com/support/linux
S: Supported
+ATL1 ETHERNET DRIVER
+P: Jay Cliburn
+M: jcliburn@gmail.com
+P: Chris Snook
+M: csnook@redhat.com
+L: atl1-devel@lists.sourceforge.net
+W: http://sourceforge.net/projects/atl1
+W: http://atl1.sourceforge.net
+S: Maintained
+
ATM
P: Chas Williams
M: chas@cmf.nrl.navy.mil
W: http://www.nongnu.org/orinoco/
S: Maintained
+PA SEMI ETHERNET DRIVER
+P: Olof Johansson
+M: olof@lixom.net
+L: netdev@vger.kernel.org
+S: Maintained
+
PARALLEL PORT SUPPORT
P: Phil Blundell
M: philb@gnu.org
PRISM54 WIRELESS DRIVER
P: Prism54 Development Team
-M: prism54-private@prism54.org
+M: developers@islsm.org
L: netdev@vger.kernel.org
W: http://prism54.org
S: Maintained
P: Heiko Carstens
M: heiko.carstens@de.ibm.com
M: linux390@de.ibm.com
-L: linux-390@vm.marist.edu
+L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
P: Frank Pavlic
M: fpavlic@de.ibm.com
M: linux390@de.ibm.com
-L: linux-390@vm.marist.edu
+L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
P: Swen Schillig
M: swen@vnet.ibm.com
M: linux390@de.ibm.com
-L: linux-390@vm.marist.edu
+L: linux-s390@vger.kernel.org
W: http://www.ibm.com/developerworks/linux/linux390/
S: Supported
W83L51xD SD/MMC CARD INTERFACE DRIVER
P: Pierre Ossman
M: drzeus-wbsd@drzeus.cx
-L: wbsd-devel@list.drzeus.cx
+L: linux-kernel@vger.kernel.org
W: http://projects.drzeus.cx/wbsd
S: Maintained
# $(EXTRAVERSION) eg, -rc6
# $(localver-full)
# $(localver)
-# localversion* (all localversion* files)
+# localversion* (files without backups, containing '~')
# $(CONFIG_LOCALVERSION) (from kernel config setting)
# $(localver-auto) (only if CONFIG_LOCALVERSION_AUTO is set)
# ./scripts/setlocalversion (SCM tag, if one exists)
# moment, only git is supported but other SCMs can edit the script
# scripts/setlocalversion and add the appropriate checks as needed.
-nullstring :=
-space := $(nullstring) # end of line
+pattern = ".*/localversion[^~]*"
+string = $(shell cat /dev/null \
+ `find $(objtree) $(srctree) -maxdepth 1 -regex $(pattern) | sort`)
-___localver = $(objtree)/localversion* $(srctree)/localversion*
-__localver = $(sort $(wildcard $(___localver)))
-# skip backup files (containing '~')
-_localver = $(foreach f, $(__localver), $(if $(findstring ~, $(f)),,$(f)))
-
-localver = $(subst $(space),, \
- $(shell cat /dev/null $(_localver)) \
- $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
+localver = $(subst $(space),, $(string) \
+ $(patsubst "%",%,$(CONFIG_LOCALVERSION)))
# If CONFIG_LOCALVERSION_AUTO is set scripts/setlocalversion is called
# and if the SCM is know a tag from the SCM is appended.
EXPORT_SYMBOL(pci_iomap);
EXPORT_SYMBOL(pci_iounmap);
+
+/* FIXME: Some boxes have multiple ISA bridges! */
+struct pci_dev *isa_bridge;
+EXPORT_SYMBOL(isa_bridge);
#
# Plug and Play support
#
-# CONFIG_PNP is not set
+CONFIG_PNP=y
+CONFIG_PNPACPI=y
#
# Block devices
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
- ((acpi_table_entry_header *)entry)->length < sizeof(*entry))
+ ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
#define PREFIX "ACPI: "
int acpi_strict;
EXPORT_SYMBOL(acpi_strict);
-acpi_interrupt_flags acpi_sci_flags __initdata;
+u8 acpi_sci_flags __initdata;
int acpi_sci_override_gsi __initdata;
int acpi_skip_timer_override __initdata;
int acpi_use_timer_override __initdata;
#warning ACPI uses CMPXCHG, i486 and later hardware
#endif
-#define MAX_MADT_ENTRIES 256
-u8 x86_acpiid_to_apicid[MAX_MADT_ENTRIES] =
- {[0 ... MAX_MADT_ENTRIES - 1] = 0xff };
-EXPORT_SYMBOL(x86_acpiid_to_apicid);
-
/* --------------------------------------------------------------------------
Boot-time Configuration
-------------------------------------------------------------------------- */
#ifdef CONFIG_PCI_MMCONFIG
/* The physical address of the MMCONFIG aperture. Set from ACPI tables. */
-struct acpi_table_mcfg_config *pci_mmcfg_config;
+struct acpi_mcfg_allocation *pci_mmcfg_config;
int pci_mmcfg_config_num;
-int __init acpi_parse_mcfg(unsigned long phys_addr, unsigned long size)
+int __init acpi_parse_mcfg(struct acpi_table_header *header)
{
struct acpi_table_mcfg *mcfg;
unsigned long i;
int config_size;
- if (!phys_addr || !size)
+ if (!header)
return -EINVAL;
- mcfg = (struct acpi_table_mcfg *)__acpi_map_table(phys_addr, size);
- if (!mcfg) {
- printk(KERN_WARNING PREFIX "Unable to map MCFG\n");
- return -ENODEV;
- }
+ mcfg = (struct acpi_table_mcfg *)header;
/* how many config structures do we have */
pci_mmcfg_config_num = 0;
- i = size - sizeof(struct acpi_table_mcfg);
- while (i >= sizeof(struct acpi_table_mcfg_config)) {
+ i = header->length - sizeof(struct acpi_table_mcfg);
+ while (i >= sizeof(struct acpi_mcfg_allocation)) {
++pci_mmcfg_config_num;
- i -= sizeof(struct acpi_table_mcfg_config);
+ i -= sizeof(struct acpi_mcfg_allocation);
};
if (pci_mmcfg_config_num == 0) {
printk(KERN_ERR PREFIX "MMCONFIG has no entries\n");
return -ENOMEM;
}
- memcpy(pci_mmcfg_config, &mcfg->config, config_size);
+ memcpy(pci_mmcfg_config, &mcfg[1], config_size);
for (i = 0; i < pci_mmcfg_config_num; ++i) {
- if (mcfg->config[i].base_reserved) {
+ if (pci_mmcfg_config[i].address > 0xFFFFFFFF) {
printk(KERN_ERR PREFIX
"MMCONFIG not in low 4GB of memory\n");
kfree(pci_mmcfg_config);
#endif /* CONFIG_PCI_MMCONFIG */
#ifdef CONFIG_X86_LOCAL_APIC
-static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_madt(struct acpi_table_header *table)
{
struct acpi_table_madt *madt = NULL;
- if (!phys_addr || !size || !cpu_has_apic)
+ if (!cpu_has_apic)
return -EINVAL;
- madt = (struct acpi_table_madt *)__acpi_map_table(phys_addr, size);
+ madt = (struct acpi_table_madt *)table;
if (!madt) {
printk(KERN_WARNING PREFIX "Unable to map MADT\n");
return -ENODEV;
}
- if (madt->lapic_address) {
- acpi_lapic_addr = (u64) madt->lapic_address;
+ if (madt->address) {
+ acpi_lapic_addr = (u64) madt->address;
printk(KERN_DEBUG PREFIX "Local APIC address 0x%08x\n",
- madt->lapic_address);
+ madt->address);
}
acpi_madt_oem_check(madt->header.oem_id, madt->header.oem_table_id);
}
static int __init
-acpi_parse_lapic(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_lapic(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_lapic *processor = NULL;
+ struct acpi_madt_local_apic *processor = NULL;
- processor = (struct acpi_table_lapic *)header;
+ processor = (struct acpi_madt_local_apic *)header;
if (BAD_MADT_ENTRY(processor, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
- /* Record local apic id only when enabled */
- if (processor->flags.enabled)
- x86_acpiid_to_apicid[processor->acpi_id] = processor->id;
-
/*
* We need to register disabled CPU as well to permit
* counting disabled CPUs. This allows us to size
* when we use CPU hotplug.
*/
mp_register_lapic(processor->id, /* APIC ID */
- processor->flags.enabled); /* Enabled? */
+ processor->lapic_flags & ACPI_MADT_ENABLED); /* Enabled? */
return 0;
}
static int __init
-acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
+acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_lapic_addr_ovr *lapic_addr_ovr = NULL;
+ struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;
- lapic_addr_ovr = (struct acpi_table_lapic_addr_ovr *)header;
+ lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;
if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
return -EINVAL;
}
static int __init
-acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_lapic_nmi *lapic_nmi = NULL;
+ struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;
- lapic_nmi = (struct acpi_table_lapic_nmi *)header;
+ lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;
if (BAD_MADT_ENTRY(lapic_nmi, end))
return -EINVAL;
#ifdef CONFIG_X86_IO_APIC
static int __init
-acpi_parse_ioapic(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_ioapic(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_ioapic *ioapic = NULL;
+ struct acpi_madt_io_apic *ioapic = NULL;
- ioapic = (struct acpi_table_ioapic *)header;
+ ioapic = (struct acpi_madt_io_apic *)header;
if (BAD_MADT_ENTRY(ioapic, end))
return -EINVAL;
polarity = 3;
/* Command-line over-ride via acpi_sci= */
- if (acpi_sci_flags.trigger)
- trigger = acpi_sci_flags.trigger;
+ if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
+ trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;
- if (acpi_sci_flags.polarity)
- polarity = acpi_sci_flags.polarity;
+ if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
+ polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;
/*
* mp_config_acpi_legacy_irqs() already setup IRQs < 16
/*
* stash over-ride to indicate we've been here
- * and for later update of acpi_fadt
+ * and for later update of acpi_gbl_FADT
*/
acpi_sci_override_gsi = gsi;
return;
}
static int __init
-acpi_parse_int_src_ovr(acpi_table_entry_header * header,
+acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_int_src_ovr *intsrc = NULL;
+ struct acpi_madt_interrupt_override *intsrc = NULL;
- intsrc = (struct acpi_table_int_src_ovr *)header;
+ intsrc = (struct acpi_madt_interrupt_override *)header;
if (BAD_MADT_ENTRY(intsrc, end))
return -EINVAL;
acpi_table_print_madt_entry(header);
- if (intsrc->bus_irq == acpi_fadt.sci_int) {
+ if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
acpi_sci_ioapic_setup(intsrc->global_irq,
- intsrc->flags.polarity,
- intsrc->flags.trigger);
+ intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+ (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
return 0;
}
if (acpi_skip_timer_override &&
- intsrc->bus_irq == 0 && intsrc->global_irq == 2) {
+ intsrc->source_irq == 0 && intsrc->global_irq == 2) {
printk(PREFIX "BIOS IRQ0 pin2 override ignored.\n");
return 0;
}
- mp_override_legacy_irq(intsrc->bus_irq,
- intsrc->flags.polarity,
- intsrc->flags.trigger, intsrc->global_irq);
+ mp_override_legacy_irq(intsrc->source_irq,
+ intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
+ (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
+ intsrc->global_irq);
return 0;
}
static int __init
-acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_nmi_src *nmi_src = NULL;
+ struct acpi_madt_nmi_source *nmi_src = NULL;
- nmi_src = (struct acpi_table_nmi_src *)header;
+ nmi_src = (struct acpi_madt_nmi_source *)header;
if (BAD_MADT_ENTRY(nmi_src, end))
return -EINVAL;
/*
* acpi_pic_sci_set_trigger()
- *
+ *
* use ELCR to set PIC-mode trigger type for SCI
*
* If a PIC-mode SCI is not recognized or gives spurious IRQ7's
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
- struct acpi_table_lapic *lapic;
+ struct acpi_madt_local_apic *lapic;
cpumask_t tmp_map, new_map;
u8 physid;
int cpu;
return -EINVAL;
}
- lapic = (struct acpi_table_lapic *)obj->buffer.pointer;
+ lapic = (struct acpi_madt_local_apic *)obj->buffer.pointer;
- if ((lapic->header.type != ACPI_MADT_LAPIC) ||
- (!lapic->flags.enabled)) {
+ if (lapic->header.type != ACPI_MADT_TYPE_LOCAL_APIC ||
+ !(lapic->lapic_flags & ACPI_MADT_ENABLED)) {
kfree(buffer.pointer);
return -EINVAL;
}
buffer.pointer = NULL;
tmp_map = cpu_present_map;
- mp_register_lapic(physid, lapic->flags.enabled);
+ mp_register_lapic(physid, lapic->lapic_flags & ACPI_MADT_ENABLED);
/*
* If mp_register_lapic successfully generates a new logical cpu
int acpi_unmap_lsapic(int cpu)
{
- int i;
-
- for_each_possible_cpu(i) {
- if (x86_acpiid_to_apicid[i] == x86_cpu_to_apicid[cpu]) {
- x86_acpiid_to_apicid[i] = -1;
- break;
- }
- }
x86_cpu_to_apicid[cpu] = -1;
cpu_clear(cpu, cpu_present_map);
num_processors--;
return 0;
}
-static int __init acpi_parse_sbf(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_sbf(struct acpi_table_header *table)
{
- struct acpi_table_sbf *sb;
-
- if (!phys_addr || !size)
- return -EINVAL;
+ struct acpi_table_boot *sb;
- sb = (struct acpi_table_sbf *)__acpi_map_table(phys_addr, size);
+ sb = (struct acpi_table_boot *)table;
if (!sb) {
printk(KERN_WARNING PREFIX "Unable to map SBF\n");
return -ENODEV;
}
- sbf_port = sb->sbf_cmos; /* Save CMOS port */
+ sbf_port = sb->cmos_index; /* Save CMOS port */
return 0;
}
#ifdef CONFIG_HPET_TIMER
-static int __init acpi_parse_hpet(unsigned long phys, unsigned long size)
+static int __init acpi_parse_hpet(struct acpi_table_header *table)
{
struct acpi_table_hpet *hpet_tbl;
struct resource *hpet_res;
resource_size_t res_start;
- if (!phys || !size)
- return -EINVAL;
-
- hpet_tbl = (struct acpi_table_hpet *)__acpi_map_table(phys, size);
+ hpet_tbl = (struct acpi_table_hpet *)table;
if (!hpet_tbl) {
printk(KERN_WARNING PREFIX "Unable to map HPET\n");
return -ENODEV;
}
- if (hpet_tbl->addr.space_id != ACPI_SPACE_MEM) {
+ if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
printk(KERN_WARNING PREFIX "HPET timers must be located in "
"memory.\n");
return -1;
hpet_res->name = (void *)&hpet_res[1];
hpet_res->flags = IORESOURCE_MEM | IORESOURCE_BUSY;
snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE,
- "HPET %u", hpet_tbl->number);
+ "HPET %u", hpet_tbl->sequence);
hpet_res->end = (1 * 1024) - 1;
}
-#ifdef CONFIG_X86_64
- vxtime.hpet_address = hpet_tbl->addr.addrl |
- ((long)hpet_tbl->addr.addrh << 32);
+#ifdef CONFIG_X86_64
+ vxtime.hpet_address = hpet_tbl->address.address;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
- hpet_tbl->id, vxtime.hpet_address);
+ hpet_tbl->id, vxtime.hpet_address);
res_start = vxtime.hpet_address;
-#else /* X86 */
+#else /* X86 */
{
extern unsigned long hpet_address;
- hpet_address = hpet_tbl->addr.addrl;
+ hpet_address = hpet_tbl->address.address;
printk(KERN_INFO PREFIX "HPET id: %#x base: %#lx\n",
- hpet_tbl->id, hpet_address);
+ hpet_tbl->id, hpet_address);
res_start = hpet_address;
}
-#endif /* X86 */
+#endif /* X86 */
if (hpet_res) {
hpet_res->start = res_start;
extern u32 pmtmr_ioport;
#endif
-static int __init acpi_parse_fadt(unsigned long phys, unsigned long size)
+static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
- struct fadt_descriptor *fadt = NULL;
-
- fadt = (struct fadt_descriptor *)__acpi_map_table(phys, size);
- if (!fadt) {
- printk(KERN_WARNING PREFIX "Unable to map FADT\n");
- return 0;
- }
- /* initialize sci_int early for INT_SRC_OVR MADT parsing */
- acpi_fadt.sci_int = fadt->sci_int;
-
- /* initialize rev and apic_phys_dest_mode for x86_64 genapic */
- acpi_fadt.revision = fadt->revision;
- acpi_fadt.force_apic_physical_destination_mode =
- fadt->force_apic_physical_destination_mode;
#ifdef CONFIG_X86_PM_TIMER
/* detect the location of the ACPI PM Timer */
- if (fadt->revision >= FADT2_REVISION_ID) {
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
/* FADT rev. 2 */
- if (fadt->xpm_tmr_blk.address_space_id !=
+ if (acpi_gbl_FADT.xpm_timer_block.space_id !=
ACPI_ADR_SPACE_SYSTEM_IO)
return 0;
- pmtmr_ioport = fadt->xpm_tmr_blk.address;
+ pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
/*
* "X" fields are optional extensions to the original V1.0
* fields, so we must selectively expand V1.0 fields if the
* corresponding X field is zero.
*/
if (!pmtmr_ioport)
- pmtmr_ioport = fadt->V1_pm_tmr_blk;
+ pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
} else {
/* FADT rev. 1 */
- pmtmr_ioport = fadt->V1_pm_tmr_blk;
+ pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
}
if (pmtmr_ioport)
printk(KERN_INFO PREFIX "PM-Timer IO Port: %#x\n",
if (!cpu_has_apic)
return -ENODEV;
- /*
+ /*
* Note that the LAPIC address is obtained from the MADT (32-bit value)
* and (optionally) overriden by a LAPIC_ADDR_OVR entry (64-bit value).
*/
count =
- acpi_table_parse_madt(ACPI_MADT_LAPIC_ADDR_OVR,
+ acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
acpi_parse_lapic_addr_ovr, 0);
if (count < 0) {
printk(KERN_ERR PREFIX
mp_register_lapic_address(acpi_lapic_addr);
- count = acpi_table_parse_madt(ACPI_MADT_LAPIC, acpi_parse_lapic,
+ count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_parse_lapic,
MAX_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No LAPIC entries present\n");
}
count =
- acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0);
+ acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* TBD: Cleanup to allow fallback to MPS */
return -ENODEV;
}
- if (!cpu_has_apic)
+ if (!cpu_has_apic)
return -ENODEV;
/*
}
count =
- acpi_table_parse_madt(ACPI_MADT_IOAPIC, acpi_parse_ioapic,
+ acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
MAX_IO_APICS);
if (!count) {
printk(KERN_ERR PREFIX "No IOAPIC entries present\n");
}
count =
- acpi_table_parse_madt(ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr,
+ acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr,
NR_IRQ_VECTORS);
if (count < 0) {
printk(KERN_ERR PREFIX
* pretend we got one so we can set the SCI flags.
*/
if (!acpi_sci_override_gsi)
- acpi_sci_ioapic_setup(acpi_fadt.sci_int, 0, 0);
+ acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0);
/* Fill in identity legacy mapings where no override */
mp_config_acpi_legacy_irqs();
count =
- acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src,
+ acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src,
NR_IRQ_VECTORS);
if (count < 0) {
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
#ifdef CONFIG_X86_LOCAL_APIC
int count, error;
- count = acpi_table_parse(ACPI_APIC, acpi_parse_madt);
+ count = acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt);
if (count >= 1) {
/*
if (acpi_disabled && !acpi_ht)
return 1;
- /*
+ /*
* Initialize the ACPI boot-time table parser.
*/
error = acpi_table_init();
return error;
}
- acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+ acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* blacklist may disable ACPI entirely
if (acpi_disabled && !acpi_ht)
return 1;
- acpi_table_parse(ACPI_BOOT, acpi_parse_sbf);
+ acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);
/*
* set sci_int and PM timer address
*/
- acpi_table_parse(ACPI_FADT, acpi_parse_fadt);
+ acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);
/*
* Process the Multiple APIC Description Table (MADT), if present
*/
acpi_process_madt();
- acpi_table_parse(ACPI_HPET, acpi_parse_hpet);
+ acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
return 0;
}
if (!s)
return -EINVAL;
if (!strcmp(s, "edge"))
- acpi_sci_flags.trigger = 1;
+ acpi_sci_flags = ACPI_MADT_TRIGGER_EDGE |
+ (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
else if (!strcmp(s, "level"))
- acpi_sci_flags.trigger = 3;
+ acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
+ (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
else if (!strcmp(s, "high"))
- acpi_sci_flags.polarity = 1;
+ acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
+ (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
else if (!strcmp(s, "low"))
- acpi_sci_flags.polarity = 3;
+ acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
+ (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
else
return -EINVAL;
return 0;
static int nvidia_hpet_detected __initdata;
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+static int __init nvidia_hpet_check(struct acpi_table_header *header)
{
nvidia_hpet_detected = 1;
return 0;
is enabled. */
if (!acpi_use_timer_override && vendor == PCI_VENDOR_ID_NVIDIA) {
nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+ acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
if (nvidia_hpet_detected == 0) {
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
/* Invoke C3 */
inb(cx_address);
/* Dummy op - must do something useless after P_LVL3 read */
- t = inl(acpi_fadt.xpm_tmr_blk.address);
+ t = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
/* Disable bus ratio bit */
local_irq_disable();
outb(3, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Disable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
switch (longhaul_version) {
case TYPE_POWERSAVER:
if (longhaul_flags & USE_ACPI_C3) {
/* Don't allow wakeup */
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
do_powersaver(cx->address, clock_ratio_index);
} else {
do_powersaver(0, clock_ratio_index);
outb(0, 0x22);
} else if ((pr != NULL) && pr->flags.bm_control) {
/* Enable bus master arbitration */
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
outb(pic2_mask,0xA1); /* restore mask */
outb(pic1_mask,0x21);
highest_speed = calc_speed(maxmult);
lowest_speed = calc_speed(minmult);
dprintk ("FSB:%dMHz Lowest speed: %s Highest speed:%s\n", fsb,
- print_speed(lowest_speed/1000),
+ print_speed(lowest_speed/1000),
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
-
+
j = 0;
while (longhaul_table[j].frequency != CPUFREQ_TABLE_END) {
speed = longhaul_table[j].frequency;
.retrigger = ioapic_retrigger_irq,
};
-int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_msg msg;
- int ret;
+ int irq, ret;
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
ret = msi_compose_msg(dev, irq, &msg);
- if (ret < 0)
+ if (ret < 0) {
+ destroy_irq(irq);
return ret;
+ }
write_msi_msg(irq, &msg);
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq,
"edge");
- return 0;
+ return irq;
}
void arch_teardown_msi_irq(unsigned int irq)
{
- return;
+ destroy_irq(irq);
}
#endif /* CONFIG_PCI_MSI */
static int gsi_to_irq[MAX_GSI_NUM];
/* Don't set up the ACPI SCI because it's already set up */
- if (acpi_fadt.sci_int == gsi)
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
return gsi;
ioapic = mp_find_ioapic(gsi);
/*
* Don't assign IRQ used by ACPI SCI
*/
- if (gsi == acpi_fadt.sci_int)
+ if (gsi == acpi_gbl_FADT.sci_interrupt)
gsi = pci_irq++;
gsi_to_irq[irq] = gsi;
} else {
/* Identify CPU proximity domains */
static void __init parse_cpu_affinity_structure(char *p)
{
- struct acpi_table_processor_affinity *cpu_affinity =
- (struct acpi_table_processor_affinity *) p;
+ struct acpi_srat_cpu_affinity *cpu_affinity =
+ (struct acpi_srat_cpu_affinity *) p;
- if (!cpu_affinity->flags.enabled)
+ if ((cpu_affinity->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return; /* empty entry */
/* mark this node as "seen" in node bitmap */
- BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain);
+ BMAP_SET(pxm_bitmap, cpu_affinity->proximity_domain_lo);
- apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain;
+ apicid_to_pxm[cpu_affinity->apic_id] = cpu_affinity->proximity_domain_lo;
printk("CPU 0x%02X in proximity domain 0x%02X\n",
- cpu_affinity->apic_id, cpu_affinity->proximity_domain);
+ cpu_affinity->apic_id, cpu_affinity->proximity_domain_lo);
}
/*
static void __init parse_memory_affinity_structure (char *sratp)
{
unsigned long long paddr, size;
- unsigned long start_pfn, end_pfn;
+ unsigned long start_pfn, end_pfn;
u8 pxm;
struct node_memory_chunk_s *p, *q, *pend;
- struct acpi_table_memory_affinity *memory_affinity =
- (struct acpi_table_memory_affinity *) sratp;
+ struct acpi_srat_mem_affinity *memory_affinity =
+ (struct acpi_srat_mem_affinity *) sratp;
- if (!memory_affinity->flags.enabled)
+ if ((memory_affinity->flags & ACPI_SRAT_MEM_ENABLED) == 0)
return; /* empty entry */
+ pxm = memory_affinity->proximity_domain & 0xff;
+
/* mark this node as "seen" in node bitmap */
- BMAP_SET(pxm_bitmap, memory_affinity->proximity_domain);
+ BMAP_SET(pxm_bitmap, pxm);
/* calculate info for memory chunk structure */
- paddr = memory_affinity->base_addr_hi;
- paddr = (paddr << 32) | memory_affinity->base_addr_lo;
- size = memory_affinity->length_hi;
- size = (size << 32) | memory_affinity->length_lo;
-
+ paddr = memory_affinity->base_address;
+ size = memory_affinity->length;
+
start_pfn = paddr >> PAGE_SHIFT;
end_pfn = (paddr + size) >> PAGE_SHIFT;
-
- pxm = memory_affinity->proximity_domain;
+
if (num_memory_chunks >= MAXCHUNKS) {
printk("Too many mem chunks in SRAT. Ignoring %lld MBytes at %llx\n",
printk("Memory range 0x%lX to 0x%lX (type 0x%X) in proximity domain 0x%02X %s\n",
start_pfn, end_pfn,
memory_affinity->memory_type,
- memory_affinity->proximity_domain,
- (memory_affinity->flags.hot_pluggable ?
+ pxm,
+ ((memory_affinity->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) ?
"enabled and removable" : "enabled" ) );
}
num_memory_chunks = 0;
while (p < end) {
switch (*p) {
- case ACPI_SRAT_PROCESSOR_AFFINITY:
+ case ACPI_SRAT_TYPE_CPU_AFFINITY:
parse_cpu_affinity_structure(p);
break;
- case ACPI_SRAT_MEMORY_AFFINITY:
+ case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
parse_memory_affinity_structure(p);
break;
default:
return 0;
}
+struct acpi_static_rsdt {
+ struct acpi_table_rsdt table;
+ u32 padding[7]; /* Allow for 7 more table entries */
+};
+
int __init get_memcfg_from_srat(void)
{
struct acpi_table_header *header = NULL;
struct acpi_table_rsdp *rsdp = NULL;
struct acpi_table_rsdt *rsdt = NULL;
- struct acpi_pointer *rsdp_address = NULL;
- struct acpi_table_rsdt saved_rsdt;
+ acpi_native_uint rsdp_address = 0;
+ struct acpi_static_rsdt saved_rsdt;
int tables = 0;
int i = 0;
- if (ACPI_FAILURE(acpi_find_root_pointer(ACPI_PHYSICAL_ADDRESSING,
- rsdp_address))) {
+ rsdp_address = acpi_find_rsdp();
+ if (!rsdp_address) {
printk("%s: System description tables not found\n",
__FUNCTION__);
goto out_err;
}
- if (rsdp_address->pointer_type == ACPI_PHYSICAL_POINTER) {
- printk("%s: assigning address to rsdp\n", __FUNCTION__);
- rsdp = (struct acpi_table_rsdp *)
- (u32)rsdp_address->pointer.physical;
- } else {
- printk("%s: rsdp_address is not a physical pointer\n", __FUNCTION__);
- goto out_err;
- }
+ printk("%s: assigning address to rsdp\n", __FUNCTION__);
+ rsdp = (struct acpi_table_rsdp *)(u32)rsdp_address;
if (!rsdp) {
printk("%s: Didn't find ACPI root!\n", __FUNCTION__);
goto out_err;
printk(KERN_INFO "%.8s v%d [%.6s]\n", rsdp->signature, rsdp->revision,
rsdp->oem_id);
- if (strncmp(rsdp->signature, RSDP_SIG,strlen(RSDP_SIG))) {
+ if (strncmp(rsdp->signature, ACPI_SIG_RSDP,strlen(ACPI_SIG_RSDP))) {
printk(KERN_WARNING "%s: RSDP table signature incorrect\n", __FUNCTION__);
goto out_err;
}
rsdt = (struct acpi_table_rsdt *)
- boot_ioremap(rsdp->rsdt_address, sizeof(struct acpi_table_rsdt));
+ boot_ioremap(rsdp->rsdt_physical_address, sizeof(struct acpi_table_rsdt));
if (!rsdt) {
printk(KERN_WARNING
goto out_err;
}
- header = & rsdt->header;
+ header = &rsdt->header;
- if (strncmp(header->signature, RSDT_SIG, strlen(RSDT_SIG))) {
+ if (strncmp(header->signature, ACPI_SIG_RSDT, strlen(ACPI_SIG_RSDT))) {
printk(KERN_WARNING "ACPI: RSDT signature incorrect\n");
goto out_err;
}
memcpy(&saved_rsdt, rsdt, sizeof(saved_rsdt));
- if (saved_rsdt.header.length > sizeof(saved_rsdt)) {
+ if (saved_rsdt.table.header.length > sizeof(saved_rsdt)) {
printk(KERN_WARNING "ACPI: Too big length in RSDT: %d\n",
- saved_rsdt.header.length);
+ saved_rsdt.table.header.length);
goto out_err;
}
for (i = 0; i < tables; i++) {
/* Map in header, then map in full table length. */
header = (struct acpi_table_header *)
- boot_ioremap(saved_rsdt.entry[i], sizeof(struct acpi_table_header));
+ boot_ioremap(saved_rsdt.table.table_offset_entry[i], sizeof(struct acpi_table_header));
if (!header)
break;
header = (struct acpi_table_header *)
- boot_ioremap(saved_rsdt.entry[i], header->length);
+ boot_ioremap(saved_rsdt.table.table_offset_entry[i], header->length);
if (!header)
break;
- if (strncmp((char *) &header->signature, "SRAT", 4))
+ if (strncmp((char *) &header->signature, ACPI_SIG_SRAT, 4))
continue;
/* we've found the srat table. don't need to look at any more tables */
};
#ifdef CONFIG_ACPI
-struct acpi_table_sdt {
- unsigned long pa;
- unsigned long count;
- struct {
- unsigned long pa;
- enum acpi_table_id id;
- unsigned long size;
- } entry[50];
-};
struct oem_table {
struct acpi_table_header Header;
int __init
find_unisys_acpi_oem_table(unsigned long *oem_addr)
{
- struct acpi_table_rsdp *rsdp = NULL;
- unsigned long rsdp_phys = 0;
- struct acpi_table_header *header = NULL;
- int i;
- struct acpi_table_sdt sdt;
-
- rsdp_phys = acpi_find_rsdp();
- rsdp = __va(rsdp_phys);
- if (rsdp->rsdt_address) {
- struct acpi_table_rsdt *mapped_rsdt = NULL;
- sdt.pa = rsdp->rsdt_address;
-
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt.pa, sizeof(struct acpi_table_header));
- if (!header)
- return -ENODEV;
-
- sdt.count = (header->length - sizeof(struct acpi_table_header)) >> 3;
- mapped_rsdt = (struct acpi_table_rsdt *)
- __acpi_map_table(sdt.pa, header->length);
- if (!mapped_rsdt)
- return -ENODEV;
-
- header = &mapped_rsdt->header;
-
- for (i = 0; i < sdt.count; i++)
- sdt.entry[i].pa = (unsigned long) mapped_rsdt->entry[i];
- };
- for (i = 0; i < sdt.count; i++) {
-
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt.entry[i].pa,
- sizeof(struct acpi_table_header));
- if (!header)
- continue;
- if (!strncmp((char *) &header->signature, "OEM1", 4)) {
- if (!strncmp((char *) &header->oem_id, "UNISYS", 6)) {
- void *addr;
- struct oem_table *t;
- acpi_table_print(header, sdt.entry[i].pa);
- t = (struct oem_table *) __acpi_map_table(sdt.entry[i].pa, header->length);
- addr = (void *) __acpi_map_table(t->OEMTableAddr, t->OEMTableSize);
- *oem_addr = (unsigned long) addr;
- return 0;
- }
+ struct acpi_table_header *header = NULL;
+ int i = 0;
+ while (ACPI_SUCCESS(acpi_get_table("OEM1", i++, &header))) {
+ if (!memcmp((char *) &header->oem_id, "UNISYS", 6)) {
+ struct oem_table *t = (struct oem_table *)header;
+ *oem_addr = (unsigned long)__acpi_map_table(t->OEMTableAddr,
+ t->OEMTableSize);
+ return 0;
}
}
return -1;
static u32 get_base_addr(unsigned int seg, int bus, unsigned devfn)
{
int cfg_num = -1;
- struct acpi_table_mcfg_config *cfg;
+ struct acpi_mcfg_allocation *cfg;
if (seg == 0 && bus < MAX_CHECK_BUS &&
test_bit(PCI_SLOT(devfn) + 32*bus, fallback_slots))
break;
}
cfg = &pci_mmcfg_config[cfg_num];
- if (cfg->pci_segment_group_number != seg)
+ if (cfg->pci_segment != seg)
continue;
if ((cfg->start_bus_number <= bus) &&
(cfg->end_bus_number >= bus))
- return cfg->base_address;
+ return cfg->address;
}
/* Handle more broken MCFG tables on Asus etc.
this applies to all busses. */
cfg = &pci_mmcfg_config[0];
if (pci_mmcfg_config_num == 1 &&
- cfg->pci_segment_group_number == 0 &&
+ cfg->pci_segment == 0 &&
(cfg->start_bus_number | cfg->end_bus_number) == 0)
- return cfg->base_address;
+ return cfg->address;
/* Fall back to type 0 */
return 0;
unsigned long flags;
u32 base;
- if ((bus > 255) || (devfn > 255) || (reg > 4095))
+ if ((bus > 255) || (devfn > 255) || (reg > 4095))
return -EINVAL;
base = get_base_addr(seg, bus, devfn);
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
- acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
- (pci_mmcfg_config[0].base_address == 0))
+ (pci_mmcfg_config[0].address == 0))
return;
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
- if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
- pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
+ pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
- pci_mmcfg_config[0].base_address);
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
+ (unsigned long)pci_mmcfg_config[0].address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
config IA64
bool
+ select PCI if (!IA64_HP_SIM)
+ select ACPI if (!IA64_HP_SIM)
default y
help
The Itanium Processor Family is Intel's 64-bit successor to
config SWIOTLB
bool
- default y
config RWSEM_XCHGADD_ALGORITHM
bool
config IA64_GENERIC
bool "generic"
- select ACPI
- select PCI
select NUMA
select ACPI_NUMA
+ select SWIOTLB
help
This selects the system type of your hardware. A "generic" kernel
will run on any supported IA-64 system. However, if you configure
config IA64_DIG
bool "DIG-compliant"
+ select SWIOTLB
config IA64_HP_ZX1
bool "HP-zx1/sx1000"
config IA64_HP_ZX1_SWIOTLB
bool "HP-zx1/sx1000 with software I/O TLB"
+ select SWIOTLB
help
Build a kernel that runs on HP zx1 and sx1000 systems even when they
have broken PCI devices which cannot DMA to full 32 bits. Apart
config IA64_HP_SIM
bool "Ski-simulator"
+ select SWIOTLB
endchoice
EXPORT_SYMBOL(hwsw_dma_supported);
EXPORT_SYMBOL(hwsw_alloc_coherent);
EXPORT_SYMBOL(hwsw_free_coherent);
+EXPORT_SYMBOL(hwsw_sync_single_for_cpu);
+EXPORT_SYMBOL(hwsw_sync_single_for_device);
+EXPORT_SYMBOL(hwsw_sync_sg_for_cpu);
+EXPORT_SYMBOL(hwsw_sync_sg_for_device);
#define BAD_MADT_ENTRY(entry, end) ( \
(!entry) || (unsigned long)entry + sizeof(*entry) > end || \
- ((acpi_table_entry_header *)entry)->length < sizeof(*entry))
+ ((struct acpi_subtable_header *)entry)->length < sizeof(*entry))
#define PREFIX "ACPI: "
unsigned int acpi_cpei_override;
unsigned int acpi_cpei_phys_cpuid;
-#define MAX_SAPICS 256
-u16 ia64_acpiid_to_sapicid[MAX_SAPICS] = {[0 ... MAX_SAPICS - 1] = -1 };
-
-EXPORT_SYMBOL(ia64_acpiid_to_sapicid);
-
const char *acpi_get_sysname(void)
{
#ifdef CONFIG_IA64_GENERIC
unsigned long rsdp_phys;
- struct acpi20_table_rsdp *rsdp;
+ struct acpi_table_rsdp *rsdp;
struct acpi_table_xsdt *xsdt;
struct acpi_table_header *hdr;
return "dig";
}
- rsdp = (struct acpi20_table_rsdp *)__va(rsdp_phys);
- if (strncmp(rsdp->signature, RSDP_SIG, sizeof(RSDP_SIG) - 1)) {
+ rsdp = (struct acpi_table_rsdp *)__va(rsdp_phys);
+ if (strncmp(rsdp->signature, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)) {
printk(KERN_ERR
"ACPI 2.0 RSDP signature incorrect, default to \"dig\"\n");
return "dig";
}
- xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_address);
+ xsdt = (struct acpi_table_xsdt *)__va(rsdp->xsdt_physical_address);
hdr = &xsdt->header;
- if (strncmp(hdr->signature, XSDT_SIG, sizeof(XSDT_SIG) - 1)) {
+ if (strncmp(hdr->signature, ACPI_SIG_XSDT, sizeof(ACPI_SIG_XSDT) - 1)) {
printk(KERN_ERR
"ACPI 2.0 XSDT signature incorrect, default to \"dig\"\n");
return "dig";
static u8 has_8259;
static int __init
-acpi_parse_lapic_addr_ovr(acpi_table_entry_header * header,
+acpi_parse_lapic_addr_ovr(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_lapic_addr_ovr *lapic;
+ struct acpi_madt_local_apic_override *lapic;
- lapic = (struct acpi_table_lapic_addr_ovr *)header;
+ lapic = (struct acpi_madt_local_apic_override *)header;
if (BAD_MADT_ENTRY(lapic, end))
return -EINVAL;
}
static int __init
-acpi_parse_lsapic(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_lsapic(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_lsapic *lsapic;
+ struct acpi_madt_local_sapic *lsapic;
- lsapic = (struct acpi_table_lsapic *)header;
+ lsapic = (struct acpi_madt_local_sapic *)header;
- if (BAD_MADT_ENTRY(lsapic, end))
- return -EINVAL;
+ /*Skip BAD_MADT_ENTRY check, as lsapic size could vary */
- if (lsapic->flags.enabled) {
+ if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
#ifdef CONFIG_SMP
smp_boot_data.cpu_phys_id[available_cpus] =
(lsapic->id << 8) | lsapic->eid;
#endif
- ia64_acpiid_to_sapicid[lsapic->acpi_id] =
- (lsapic->id << 8) | lsapic->eid;
++available_cpus;
}
}
static int __init
-acpi_parse_lapic_nmi(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_lapic_nmi(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_lapic_nmi *lacpi_nmi;
+ struct acpi_madt_local_apic_nmi *lacpi_nmi;
- lacpi_nmi = (struct acpi_table_lapic_nmi *)header;
+ lacpi_nmi = (struct acpi_madt_local_apic_nmi *)header;
if (BAD_MADT_ENTRY(lacpi_nmi, end))
return -EINVAL;
}
static int __init
-acpi_parse_iosapic(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_iosapic(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_iosapic *iosapic;
+ struct acpi_madt_io_sapic *iosapic;
- iosapic = (struct acpi_table_iosapic *)header;
+ iosapic = (struct acpi_madt_io_sapic *)header;
if (BAD_MADT_ENTRY(iosapic, end))
return -EINVAL;
static unsigned int __initdata acpi_madt_rev;
static int __init
-acpi_parse_plat_int_src(acpi_table_entry_header * header,
+acpi_parse_plat_int_src(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_plat_int_src *plintsrc;
+ struct acpi_madt_interrupt_source *plintsrc;
int vector;
- plintsrc = (struct acpi_table_plat_int_src *)header;
+ plintsrc = (struct acpi_madt_interrupt_source *)header;
if (BAD_MADT_ENTRY(plintsrc, end))
return -EINVAL;
*/
vector = iosapic_register_platform_intr(plintsrc->type,
plintsrc->global_irq,
- plintsrc->iosapic_vector,
+ plintsrc->io_sapic_vector,
plintsrc->eid,
plintsrc->id,
- (plintsrc->flags.polarity ==
- 1) ? IOSAPIC_POL_HIGH :
- IOSAPIC_POL_LOW,
- (plintsrc->flags.trigger ==
- 1) ? IOSAPIC_EDGE :
- IOSAPIC_LEVEL);
+ ((plintsrc->inti_flags & ACPI_MADT_POLARITY_MASK) ==
+ ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
+ IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+ ((plintsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
+ ACPI_MADT_TRIGGER_EDGE) ?
+ IOSAPIC_EDGE : IOSAPIC_LEVEL);
platform_intr_list[plintsrc->type] = vector;
if (acpi_madt_rev > 1) {
- acpi_cpei_override = plintsrc->plint_flags.cpei_override_flag;
+ acpi_cpei_override = plintsrc->flags & ACPI_MADT_CPEI_OVERRIDE;
}
/*
}
static int __init
-acpi_parse_int_src_ovr(acpi_table_entry_header * header,
+acpi_parse_int_src_ovr(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_int_src_ovr *p;
+ struct acpi_madt_interrupt_override *p;
- p = (struct acpi_table_int_src_ovr *)header;
+ p = (struct acpi_madt_interrupt_override *)header;
if (BAD_MADT_ENTRY(p, end))
return -EINVAL;
- iosapic_override_isa_irq(p->bus_irq, p->global_irq,
- (p->flags.polarity ==
- 1) ? IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
- (p->flags.trigger ==
- 1) ? IOSAPIC_EDGE : IOSAPIC_LEVEL);
+ iosapic_override_isa_irq(p->source_irq, p->global_irq,
+ ((p->inti_flags & ACPI_MADT_POLARITY_MASK) ==
+ ACPI_MADT_POLARITY_ACTIVE_HIGH) ?
+ IOSAPIC_POL_HIGH : IOSAPIC_POL_LOW,
+ ((p->inti_flags & ACPI_MADT_TRIGGER_MASK) ==
+ ACPI_MADT_TRIGGER_EDGE) ?
+ IOSAPIC_EDGE : IOSAPIC_LEVEL);
return 0;
}
static int __init
-acpi_parse_nmi_src(acpi_table_entry_header * header, const unsigned long end)
+acpi_parse_nmi_src(struct acpi_subtable_header * header, const unsigned long end)
{
- struct acpi_table_nmi_src *nmi_src;
+ struct acpi_madt_nmi_source *nmi_src;
- nmi_src = (struct acpi_table_nmi_src *)header;
+ nmi_src = (struct acpi_madt_nmi_source *)header;
if (BAD_MADT_ENTRY(nmi_src, end))
return -EINVAL;
}
}
-static int __init acpi_parse_madt(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_madt(struct acpi_table_header *table)
{
- if (!phys_addr || !size)
+ if (!table)
return -EINVAL;
- acpi_madt = (struct acpi_table_madt *)__va(phys_addr);
+ acpi_madt = (struct acpi_table_madt *)table;
acpi_madt_rev = acpi_madt->header.revision;
#ifdef CONFIG_ITANIUM
has_8259 = 1; /* Firmware on old Itanium systems is broken */
#else
- has_8259 = acpi_madt->flags.pcat_compat;
+ has_8259 = acpi_madt->flags & ACPI_MADT_PCAT_COMPAT;
#endif
iosapic_system_init(has_8259);
/* Get base address of IPI Message Block */
- if (acpi_madt->lapic_address)
- ipi_base_addr = ioremap(acpi_madt->lapic_address, 0);
+ if (acpi_madt->address)
+ ipi_base_addr = ioremap(acpi_madt->address, 0);
printk(KERN_INFO PREFIX "Local APIC address %p\n", ipi_base_addr);
#define pxm_bit_test(bit) (test_bit(bit,(void *)pxm_flag))
static struct acpi_table_slit __initdata *slit_table;
-static int get_processor_proximity_domain(struct acpi_table_processor_affinity *pa)
+static int get_processor_proximity_domain(struct acpi_srat_cpu_affinity *pa)
{
int pxm;
- pxm = pa->proximity_domain;
+ pxm = pa->proximity_domain_lo;
if (ia64_platform_is("sn2"))
- pxm += pa->reserved[0] << 8;
+ pxm += pa->proximity_domain_hi[0] << 8;
return pxm;
}
-static int get_memory_proximity_domain(struct acpi_table_memory_affinity *ma)
+static int get_memory_proximity_domain(struct acpi_srat_mem_affinity *ma)
{
int pxm;
pxm = ma->proximity_domain;
- if (ia64_platform_is("sn2"))
- pxm += ma->reserved1[0] << 8;
+ if (!ia64_platform_is("sn2"))
+ pxm &= 0xff;
+
return pxm;
}
u32 len;
len = sizeof(struct acpi_table_header) + 8
- + slit->localities * slit->localities;
+ + slit->locality_count * slit->locality_count;
if (slit->header.length != len) {
printk(KERN_ERR
"ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n",
}
void __init
-acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
{
int pxm;
- if (!pa->flags.enabled)
+ if (!(pa->flags & ACPI_SRAT_CPU_ENABLED))
return;
pxm = get_processor_proximity_domain(pa);
pxm_bit_set(pxm);
node_cpuid[srat_num_cpus].phys_id =
- (pa->apic_id << 8) | (pa->lsapic_eid);
+ (pa->apic_id << 8) | (pa->local_sapic_eid);
/* nid should be overridden as logical node id later */
node_cpuid[srat_num_cpus].nid = pxm;
srat_num_cpus++;
}
void __init
-acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
unsigned long paddr, size;
int pxm;
pxm = get_memory_proximity_domain(ma);
/* fill node memory chunk structure */
- paddr = ma->base_addr_hi;
- paddr = (paddr << 32) | ma->base_addr_lo;
- size = ma->length_hi;
- size = (size << 32) | ma->length_lo;
+ paddr = ma->base_address;
+ size = ma->length;
/* Ignore disabled entries */
- if (!ma->flags.enabled)
+ if (!(ma->flags & ACPI_SRAT_MEM_ENABLED))
return;
/* record this node in proximity bitmap */
if (!slit_table)
return;
memset(numa_slit, -1, sizeof(numa_slit));
- for (i = 0; i < slit_table->localities; i++) {
+ for (i = 0; i < slit_table->locality_count; i++) {
if (!pxm_bit_test(i))
continue;
node_from = pxm_to_node(i);
- for (j = 0; j < slit_table->localities; j++) {
+ for (j = 0; j < slit_table->locality_count; j++) {
if (!pxm_bit_test(j))
continue;
node_to = pxm_to_node(j);
node_distance(node_from, node_to) =
- slit_table->entry[i * slit_table->localities + j];
+ slit_table->entry[i * slit_table->locality_count + j];
}
}
EXPORT_SYMBOL(acpi_unregister_gsi);
-static int __init acpi_parse_fadt(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
struct acpi_table_header *fadt_header;
- struct fadt_descriptor *fadt;
+ struct acpi_table_fadt *fadt;
- if (!phys_addr || !size)
+ if (!table)
return -EINVAL;
- fadt_header = (struct acpi_table_header *)__va(phys_addr);
+ fadt_header = (struct acpi_table_header *)table;
if (fadt_header->revision != 3)
return -ENODEV; /* Only deal with ACPI 2.0 FADT */
- fadt = (struct fadt_descriptor *)fadt_header;
+ fadt = (struct acpi_table_fadt *)fadt_header;
- acpi_register_gsi(fadt->sci_int, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+ acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
return 0;
}
* information -- the successor to MPS tables.
*/
- if (acpi_table_parse(ACPI_APIC, acpi_parse_madt) < 1) {
+ if (acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt) < 1) {
printk(KERN_ERR PREFIX "Can't find MADT\n");
goto skip_madt;
}
/* Local APIC */
if (acpi_table_parse_madt
- (ACPI_MADT_LAPIC_ADDR_OVR, acpi_parse_lapic_addr_ovr, 0) < 0)
+ (ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE, acpi_parse_lapic_addr_ovr, 0) < 0)
printk(KERN_ERR PREFIX
"Error parsing LAPIC address override entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_LSAPIC, acpi_parse_lsapic, NR_CPUS)
+ if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC, acpi_parse_lsapic, NR_CPUS)
< 1)
printk(KERN_ERR PREFIX
"Error parsing MADT - no LAPIC entries\n");
- if (acpi_table_parse_madt(ACPI_MADT_LAPIC_NMI, acpi_parse_lapic_nmi, 0)
+ if (acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI, acpi_parse_lapic_nmi, 0)
< 0)
printk(KERN_ERR PREFIX "Error parsing LAPIC NMI entry\n");
/* I/O APIC */
if (acpi_table_parse_madt
- (ACPI_MADT_IOSAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1)
+ (ACPI_MADT_TYPE_IO_SAPIC, acpi_parse_iosapic, NR_IOSAPICS) < 1)
printk(KERN_ERR PREFIX
"Error parsing MADT - no IOSAPIC entries\n");
/* System-Level Interrupt Routing */
if (acpi_table_parse_madt
- (ACPI_MADT_PLAT_INT_SRC, acpi_parse_plat_int_src,
+ (ACPI_MADT_TYPE_INTERRUPT_SOURCE, acpi_parse_plat_int_src,
ACPI_MAX_PLATFORM_INTERRUPTS) < 0)
printk(KERN_ERR PREFIX
"Error parsing platform interrupt source entry\n");
if (acpi_table_parse_madt
- (ACPI_MADT_INT_SRC_OVR, acpi_parse_int_src_ovr, 0) < 0)
+ (ACPI_MADT_TYPE_INTERRUPT_OVERRIDE, acpi_parse_int_src_ovr, 0) < 0)
printk(KERN_ERR PREFIX
"Error parsing interrupt source overrides entry\n");
- if (acpi_table_parse_madt(ACPI_MADT_NMI_SRC, acpi_parse_nmi_src, 0) < 0)
+ if (acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE, acpi_parse_nmi_src, 0) < 0)
printk(KERN_ERR PREFIX "Error parsing NMI SRC entry\n");
skip_madt:
* gets interrupts such as power and sleep buttons. If it's not
* on a Legacy interrupt, it needs to be setup.
*/
- if (acpi_table_parse(ACPI_FADT, acpi_parse_fadt) < 1)
+ if (acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt) < 1)
printk(KERN_ERR PREFIX "Can't find FADT\n");
#ifdef CONFIG_SMP
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
- struct acpi_table_lsapic *lsapic;
+ struct acpi_madt_local_sapic *lsapic;
cpumask_t tmp_map;
long physid;
int cpu;
return -EINVAL;
obj = buffer.pointer;
- if (obj->type != ACPI_TYPE_BUFFER ||
- obj->buffer.length < sizeof(*lsapic)) {
+ if (obj->type != ACPI_TYPE_BUFFER)
+ {
kfree(buffer.pointer);
return -EINVAL;
}
- lsapic = (struct acpi_table_lsapic *)obj->buffer.pointer;
+ lsapic = (struct acpi_madt_local_sapic *)obj->buffer.pointer;
- if ((lsapic->header.type != ACPI_MADT_LSAPIC) ||
- (!lsapic->flags.enabled)) {
+ if ((lsapic->header.type != ACPI_MADT_TYPE_LOCAL_SAPIC) ||
+ (!lsapic->lapic_flags & ACPI_MADT_ENABLED)) {
kfree(buffer.pointer);
return -EINVAL;
}
cpu_set(cpu, cpu_present_map);
ia64_cpu_to_sapicid[cpu] = physid;
- ia64_acpiid_to_sapicid[lsapic->acpi_id] = ia64_cpu_to_sapicid[cpu];
*pcpu = cpu;
return (0);
int acpi_unmap_lsapic(int cpu)
{
- int i;
-
- for (i = 0; i < MAX_SAPICS; i++) {
- if (ia64_acpiid_to_sapicid[i] == ia64_cpu_to_sapicid[cpu]) {
- ia64_acpiid_to_sapicid[i] = -1;
- break;
- }
- }
ia64_cpu_to_sapicid[cpu] = -1;
cpu_clear(cpu, cpu_present_map);
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *obj;
- struct acpi_table_iosapic *iosapic;
+ struct acpi_madt_io_sapic *iosapic;
unsigned int gsi_base;
int pxm, node;
return AE_OK;
}
- iosapic = (struct acpi_table_iosapic *)obj->buffer.pointer;
+ iosapic = (struct acpi_madt_io_sapic *)obj->buffer.pointer;
- if (iosapic->header.type != ACPI_MADT_IOSAPIC) {
+ if (iosapic->header.type != ACPI_MADT_TYPE_IO_SAPIC) {
kfree(buffer.pointer);
return AE_OK;
}
final_note(buf);
}
+#ifdef CONFIG_SMP
static int
kdump_wait_cpu_freeze(void)
{
}
return 1;
}
+#endif
void
machine_crash_shutdown(struct pt_regs *pt)
static void
machine_kdump_on_init(void)
{
+ if (!ia64_kimage) {
+ printk(KERN_NOTICE "machine_kdump_on_init(): "
+ "kdump not configured\n");
+ return;
+ }
local_irq_disable();
kexec_disable_iosapic();
machine_kexec(ia64_kimage);
atomic_inc(&kdump_cpu_freezed);
kdump_status[cpuid] = 1;
mb();
- if (cpuid == 0) {
- for (;;)
- cpu_relax();
- } else
+#ifdef CONFIG_HOTPLUG_CPU
+ if (cpuid != 0)
ia64_jump_to_sal(&sal_boot_rendez_state[cpuid]);
+#endif
+ for (;;)
+ cpu_relax();
}
static int
#include <linux/errno.h>
#include <linux/types.h>
-#include <linux/uaccess.h>
+#include <asm/page.h>
+#include <asm/uaccess.h>
/**
* copy_oldmem_page - copy one page from "oldmem"
#endif
return __va(md->phys_addr);
}
- printk(KERN_WARNING "%s: no PAL-code memory-descriptor found",
+ printk(KERN_WARNING "%s: no PAL-code memory-descriptor found\n",
__FUNCTION__);
return NULL;
}
data8 sys_sync_file_range // 1300
data8 sys_tee
data8 sys_vmsplice
+ data8 sys_ni_syscall // reserved for move_pages
+ data8 sys_getcpu
.org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls
/* Clear the interrupt controller descriptor */
idesc->chip = &no_irq_type;
+#ifdef CONFIG_SMP
+ /* Clear affinity */
+ cpus_setall(idesc->affinity);
+#endif
+
/* Clear the interrupt information */
memset(&iosapic_intr_info[vector], 0,
sizeof(struct iosapic_intr_info));
#include <linux/kexec.h>
#include <linux/cpu.h>
#include <linux/irq.h>
+#include <linux/efi.h>
#include <asm/mmu_context.h>
#include <asm/setup.h>
#include <asm/delay.h>
{
}
-void machine_shutdown(void)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (cpu != smp_processor_id())
- cpu_down(cpu);
- }
- kexec_disable_iosapic();
-}
-
/*
* Do not allocate memory (or fail in any way) in machine_kexec().
* We are past the point of no return, committed to rebooting now.
*/
-extern void *efi_get_pal_addr(void);
static void ia64_machine_kexec(struct unw_frame_info *info, void *arg)
{
struct kimage *image = arg;
unsigned long vector;
int ii;
+ BUG_ON(!image);
if (image->type == KEXEC_TYPE_CRASH) {
crash_save_this_cpu();
current->thread.ksp = (__u64)info->sw - 16;
void machine_kexec(struct kimage *image)
{
+ BUG_ON(!image);
unw_init_running(ia64_machine_kexec, image);
for(;;);
}
}
#endif /* CONFIG_SMP */
-int ia64_setup_msi_irq(unsigned int irq, struct pci_dev *pdev)
+int ia64_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
{
struct msi_msg msg;
unsigned long dest_phys_id;
- unsigned int vector;
+ unsigned int irq, vector;
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
dest_phys_id = cpu_physical_id(first_cpu(cpu_online_map));
vector = irq;
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &ia64_msi_chip, handle_edge_irq);
- return 0;
+ return irq;
}
void ia64_teardown_msi_irq(unsigned int irq)
{
- return; /* no-op */
+ destroy_irq(irq);
}
static void ia64_ack_msi_irq(unsigned int irq)
};
-int arch_setup_msi_irq(unsigned int irq, struct pci_dev *pdev)
+int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
{
if (platform_setup_msi_irq)
- return platform_setup_msi_irq(irq, pdev);
+ return platform_setup_msi_irq(pdev, desc);
- return ia64_setup_msi_irq(irq, pdev);
+ return ia64_setup_msi_irq(pdev, desc);
}
void arch_teardown_msi_irq(unsigned int irq)
#include <asm/ia32.h>
#include <asm/irq.h>
#include <asm/kdebug.h>
+#include <asm/kexec.h>
#include <asm/pgalloc.h>
#include <asm/processor.h>
#include <asm/sal.h>
ia64_pal_halt(min_power_state);
}
+void machine_shutdown(void)
+{
+#ifdef CONFIG_HOTPLUG_CPU
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (cpu != smp_processor_id())
+ cpu_down(cpu);
+ }
+#endif
+#ifdef CONFIG_KEXEC
+ kexec_disable_iosapic();
+#endif
+}
+
void
machine_restart (char *restart_cmd)
{
*/
list_for_each_safe(this, next, ¤t->children) {
p = list_entry(this, struct task_struct, sibling);
- if (p->mm != mm)
+ if (p->tgid != child->tgid)
continue;
if (thread_matches(p, addr)) {
child = p;
struct ia64_psr *child_psr = ia64_psr(task_pt_regs(child));
/* make sure the single step/taken-branch trap bits are not set: */
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
child_psr->ss = 0;
child_psr->tb = 0;
}
* Make sure the single step/taken-branch trap bits
* are not set:
*/
+ clear_tsk_thread_flag(child, TIF_SINGLESTEP);
ia64_psr(pt)->ss = 0;
ia64_psr(pt)->tb = 0;
goto out_tsk;
clear_tsk_thread_flag(child, TIF_SYSCALL_TRACE);
+ set_tsk_thread_flag(child, TIF_SINGLESTEP);
if (request == PTRACE_SINGLESTEP) {
ia64_psr(pt)->ss = 1;
} else {
}
-void
+static void
syscall_trace (void)
{
- if (!test_thread_flag(TIF_SYSCALL_TRACE))
- return;
- if (!(current->ptrace & PT_PTRACED))
- return;
/*
* The 0x80 provides a way for the tracing parent to
* distinguish between a syscall stop and SIGTRAP delivery.
audit_syscall_exit(success, result);
}
- if (test_thread_flag(TIF_SYSCALL_TRACE)
+ if ((test_thread_flag(TIF_SYSCALL_TRACE)
+ || test_thread_flag(TIF_SINGLESTEP))
&& (current->ptrace & PT_PTRACED))
syscall_trace();
}
{ 1UL << 1, "spontaneous deferral"},
{ 1UL << 2, "16-byte atomic ops" }
};
- char features[128], *cp, sep;
+ char features[128], *cp, *sep;
struct cpuinfo_ia64 *c = v;
unsigned long mask;
unsigned long proc_freq;
- int i;
+ int i, size;
mask = c->features;
/* build the feature string: */
- memcpy(features, " standard", 10);
+ memcpy(features, "standard", 9);
cp = features;
- sep = 0;
- for (i = 0; i < (int) ARRAY_SIZE(feature_bits); ++i) {
+ size = sizeof(features);
+ sep = "";
+ for (i = 0; i < ARRAY_SIZE(feature_bits) && size > 1; ++i) {
if (mask & feature_bits[i].mask) {
- if (sep)
- *cp++ = sep;
- sep = ',';
- *cp++ = ' ';
- strcpy(cp, feature_bits[i].feature_name);
- cp += strlen(feature_bits[i].feature_name);
+ cp += snprintf(cp, size, "%s%s", sep,
+ feature_bits[i].feature_name),
+ sep = ", ";
mask &= ~feature_bits[i].mask;
+ size = sizeof(features) - (cp - features);
}
}
- if (mask) {
- /* print unknown features as a hex value: */
- if (sep)
- *cp++ = sep;
- sprintf(cp, " 0x%lx", mask);
+ if (mask && size > 1) {
+ /* print unknown features as a hex value */
+ snprintf(cp, size, "%s0x%lx", sep, mask);
}
proc_freq = cpufreq_quick_get(cpunum);
"model name : %s\n"
"revision : %u\n"
"archrev : %u\n"
- "features :%s\n" /* don't change this---it _is_ right! */
+ "features : %s\n"
"cpu number : %lu\n"
"cpu regs : %u\n"
"cpu MHz : %lu.%06lu\n"
}
#endif
+ . = ALIGN(8);
__con_initcall_start = .;
.con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET)
{ *(.con_initcall.init) }
#endif
/**
- * show_mem - display a memory statistics summary
+ * show_mem - give short summary of memory stats
*
- * Just walks the pages in the system and describes where they're allocated.
+ * Shows a simple page count of reserved and used pages in the system.
+ * For discontig machines, it does this on a per-pgdat basis.
*/
-void
-show_mem (void)
+void show_mem(void)
{
- int i, total = 0, reserved = 0;
- int shared = 0, cached = 0;
+ int i, total_reserved = 0;
+ int total_shared = 0, total_cached = 0;
+ unsigned long total_present = 0;
+ pg_data_t *pgdat;
printk(KERN_INFO "Mem-info:\n");
show_free_areas();
-
printk(KERN_INFO "Free swap: %6ldkB\n",
nr_swap_pages<<(PAGE_SHIFT-10));
- i = max_mapnr;
- for (i = 0; i < max_mapnr; i++) {
- if (!pfn_valid(i)) {
+ printk(KERN_INFO "Node memory in pages:\n");
+ for_each_online_pgdat(pgdat) {
+ unsigned long present;
+ unsigned long flags;
+ int shared = 0, cached = 0, reserved = 0;
+
+ pgdat_resize_lock(pgdat, &flags);
+ present = pgdat->node_present_pages;
+ for(i = 0; i < pgdat->node_spanned_pages; i++) {
+ struct page *page;
+ if (pfn_valid(pgdat->node_start_pfn + i))
+ page = pfn_to_page(pgdat->node_start_pfn + i);
+ else {
#ifdef CONFIG_VIRTUAL_MEM_MAP
- if (max_gap < LARGE_GAP)
- continue;
- i = vmemmap_find_next_valid_pfn(0, i) - 1;
+ if (max_gap < LARGE_GAP)
+ continue;
#endif
- continue;
+ i = vmemmap_find_next_valid_pfn(pgdat->node_id,
+ i) - 1;
+ continue;
+ }
+ if (PageReserved(page))
+ reserved++;
+ else if (PageSwapCache(page))
+ cached++;
+ else if (page_count(page))
+ shared += page_count(page)-1;
}
- total++;
- if (PageReserved(mem_map+i))
- reserved++;
- else if (PageSwapCache(mem_map+i))
- cached++;
- else if (page_count(mem_map + i))
- shared += page_count(mem_map + i) - 1;
+ pgdat_resize_unlock(pgdat, &flags);
+ total_present += present;
+ total_reserved += reserved;
+ total_cached += cached;
+ total_shared += shared;
+ printk(KERN_INFO "Node %4d: RAM: %11ld, rsvd: %8d, "
+ "shrd: %10d, swpd: %10d\n", pgdat->node_id,
+ present, reserved, shared, cached);
}
- printk(KERN_INFO "%d pages of RAM\n", total);
- printk(KERN_INFO "%d reserved pages\n", reserved);
- printk(KERN_INFO "%d pages shared\n", shared);
- printk(KERN_INFO "%d pages swap cached\n", cached);
- printk(KERN_INFO "%ld pages in page table cache\n",
+ printk(KERN_INFO "%ld pages of RAM\n", total_present);
+ printk(KERN_INFO "%d reserved pages\n", total_reserved);
+ printk(KERN_INFO "%d pages shared\n", total_shared);
+ printk(KERN_INFO "%d pages swap cached\n", total_cached);
+ printk(KERN_INFO "Total of %ld pages in page table cache\n",
pgtable_quicklist_total_size());
+ printk(KERN_INFO "%d free buffer pages\n", nr_free_buffer_pages());
}
+
/* physical address where the bootmem map is located */
unsigned long bootmap_start;
#ifdef CONFIG_CRASH_DUMP
/* If we are doing a crash dump, we still need to know the real mem
- * size before original memory map is * reset. */
+ * size before original memory map is reset. */
saved_max_pfn = max_pfn;
#endif
}
return;
}
-#ifdef CONFIG_SPARSEMEM
-/**
- * register_sparse_mem - notify SPARSEMEM that this memory range exists.
- * @start: physical start of range
- * @end: physical end of range
- * @arg: unused
- *
- * Simply calls SPARSEMEM to register memory section(s).
- */
-static int __init register_sparse_mem(unsigned long start, unsigned long end,
- void *arg)
-{
- int nid;
-
- start = __pa(start) >> PAGE_SHIFT;
- end = __pa(end) >> PAGE_SHIFT;
- nid = early_pfn_to_nid(start);
- memory_present(nid, start, end);
-
- return 0;
-}
-
-static void __init arch_sparse_init(void)
-{
- efi_memmap_walk(register_sparse_mem, NULL);
- sparse_init();
-}
-#else
-#define arch_sparse_init() do {} while (0)
-#endif
-
/**
* find_memory - walk the EFI memory map and setup the bootmem allocator
*
node_clear(node, memory_less_mask);
mem_data[node].min_pfn = ~0UL;
}
+
+ efi_memmap_walk(register_active_ranges, NULL);
+
/*
* Initialize the boot memory maps in reverse order since that's
* what the bootmem allocator expects
max_pfn = max_low_pfn;
find_initrd();
+
+#ifdef CONFIG_CRASH_DUMP
+ /* If we are doing a crash dump, we still need to know the real mem
+ * size before original memory map is reset. */
+ saved_max_pfn = max_pfn;
+#endif
}
#ifdef CONFIG_SMP
{
unsigned long end = start + len;
- add_active_range(node, start >> PAGE_SHIFT, end >> PAGE_SHIFT);
mem_data[node].num_physpages += len >> PAGE_SHIFT;
if (start <= __pa(MAX_DMA_ADDRESS))
mem_data[node].num_dma_physpages +=
max_dma = virt_to_phys((void *) MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- arch_sparse_init();
-
efi_memmap_walk(filter_rsvd_memory, count_node_pages);
+ sparse_memory_present_with_active_regions(MAX_NUMNODES);
+ sparse_init();
+
#ifdef CONFIG_VIRTUAL_MEM_MAP
vmalloc_end -= PAGE_ALIGN(ALIGN(max_low_pfn, MAX_ORDER_NR_PAGES) *
sizeof(struct page));
#include <linux/swap.h>
#include <linux/proc_fs.h>
#include <linux/bitops.h>
+#include <linux/kexec.h>
#include <asm/a.out.h>
#include <asm/dma.h>
set_bit(PG_arch_1, &page->flags); /* mark page as clean */
}
+/*
+ * Since DMA is i-cache coherent, any (complete) pages that were written via
+ * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
+ * flush them when they get mapped into an executable vm-area.
+ */
+void
+dma_mark_clean(void *addr, size_t size)
+{
+ unsigned long pg_addr, end;
+
+ pg_addr = PAGE_ALIGN((unsigned long) addr);
+ end = (unsigned long) addr + size;
+ while (pg_addr + PAGE_SIZE <= end) {
+ struct page *page = virt_to_page(pg_addr);
+ set_bit(PG_arch_1, &page->flags);
+ pg_addr += PAGE_SIZE;
+ }
+}
+
inline void
ia64_set_rbs_bot (void)
{
return 0;
}
+#endif /* CONFIG_VIRTUAL_MEM_MAP */
+
int __init
register_active_ranges(u64 start, u64 end, void *arg)
{
- add_active_range(0, __pa(start) >> PAGE_SHIFT, __pa(end) >> PAGE_SHIFT);
+ int nid = paddr_to_nid(__pa(start));
+
+ if (nid < 0)
+ nid = 0;
+#ifdef CONFIG_KEXEC
+ if (start > crashk_res.start && start < crashk_res.end)
+ start = crashk_res.end;
+ if (end > crashk_res.start && end < crashk_res.end)
+ end = crashk_res.start;
+#endif
+
+ if (start < end)
+ add_active_range(nid, __pa(start) >> PAGE_SHIFT,
+ __pa(end) >> PAGE_SHIFT);
return 0;
}
-#endif /* CONFIG_VIRTUAL_MEM_MAP */
static int __init
count_reserved_pages (u64 start, u64 end, void *arg)
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
- * Copyright (C) 1992 - 1997, 2000,2002-2005 Silicon Graphics, Inc. All rights reserved.
+ * Copyright (C) 1992 - 1997, 2000,2002-2007 Silicon Graphics, Inc. All rights reserved.
*/
#include <linux/types.h>
(u64) nasid, 0, 0, 0, 0, 0, 0);
if ((int)ret_stuff.v0)
- panic("hubii_eint_handler(): Fatal TIO Error");
+ panic("%s: Fatal %s Error", __FUNCTION__,
+ ((nasid & 1) ? "TIO" : "HUBII"));
if (!(nasid & 1)) /* Not a TIO, handle CRB errors */
(void)hubiio_crb_error_handler(hubdev_info);
- } else
- bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
+ } else
+ if (nasid & 1) { /* TIO errors */
+ SAL_CALL_NOLOCK(ret_stuff, SN_SAL_HUB_ERROR_INTERRUPT,
+ (u64) nasid, 0, 0, 0, 0, 0, 0);
+
+ if ((int)ret_stuff.v0)
+ panic("%s: Fatal TIO Error", __FUNCTION__);
+ } else
+ bte_error_handler((unsigned long)NODEPDA(nasid_to_cnodeid(nasid)));
return IRQ_HANDLED;
}
#include <asm/sn/sn_sal.h>
#include "xtalk/hubdev.h"
#include <linux/acpi.h>
+#include <acpi/acnamesp.h>
/*
0xa2, 0x7c, 0x08, 0x00, 0x69, 0x13, 0xea, 0x51 },
};
+struct sn_pcidev_match {
+ u8 bus;
+ unsigned int devfn;
+ acpi_handle handle;
+};
+
/*
* Perform the early IO init in PROM.
*/
status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
&sn_uuid, &buffer);
if (ACPI_FAILURE(status)) {
- printk(KERN_ERR "get_acpi_pcibus_ptr: "
- "get_acpi_bussoft_info() failed: %d\n",
- status);
+ printk(KERN_ERR "%s: "
+ "acpi_get_vendor_resource() failed (0x%x) for: ",
+ __FUNCTION__, status);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
return NULL;
}
resource = buffer.pointer;
if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
sizeof(struct pcibus_bussoft *)) {
printk(KERN_ERR
- "get_acpi_bussoft_ptr: Invalid vendor data "
- "length %d\n", vendor->byte_length);
+ "%s: Invalid vendor data length %d\n",
+ __FUNCTION__, vendor->byte_length);
kfree(buffer.pointer);
return NULL;
}
}
/*
- * sn_acpi_bus_fixup
+ * sn_extract_device_info - Extract the pcidev_info and the sn_irq_info
+ * pointers from the vendor resource using the
+ * provided acpi handle, and copy the structures
+ * into the argument buffers.
*/
-void
-sn_acpi_bus_fixup(struct pci_bus *bus)
+static int
+sn_extract_device_info(acpi_handle handle, struct pcidev_info **pcidev_info,
+ struct sn_irq_info **sn_irq_info)
{
- struct pci_dev *pci_dev = NULL;
- struct pcibus_bussoft *prom_bussoft_ptr;
- extern void sn_common_bus_fixup(struct pci_bus *,
- struct pcibus_bussoft *);
+ u64 addr;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct sn_irq_info *irq_info, *irq_info_prom;
+ struct pcidev_info *pcidev_ptr, *pcidev_prom_ptr;
+ struct acpi_resource *resource;
+ int ret = 0;
+ acpi_status status;
+ struct acpi_resource_vendor_typed *vendor;
- if (!bus->parent) { /* If root bus */
- prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
- if (prom_bussoft_ptr == NULL) {
+ /*
+ * The pointer to this device's pcidev_info structure in
+ * the PROM, is in the vendor resource.
+ */
+ status = acpi_get_vendor_resource(handle, METHOD_NAME__CRS,
+ &sn_uuid, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR
+ "%s: acpi_get_vendor_resource() failed (0x%x) for: ",
+ __FUNCTION__, status);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ return 1;
+ }
+
+ resource = buffer.pointer;
+ vendor = &resource->data.vendor_typed;
+ if ((vendor->byte_length - sizeof(struct acpi_vendor_uuid)) !=
+ sizeof(struct pci_devdev_info *)) {
+ printk(KERN_ERR
+ "%s: Invalid vendor data length: %d for: ",
+ __FUNCTION__, vendor->byte_length);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ ret = 1;
+ goto exit;
+ }
+
+ pcidev_ptr = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
+ if (!pcidev_ptr)
+ panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+
+ memcpy(&addr, vendor->byte_data, sizeof(struct pcidev_info *));
+ pcidev_prom_ptr = __va(addr);
+ memcpy(pcidev_ptr, pcidev_prom_ptr, sizeof(struct pcidev_info));
+
+ /* Get the IRQ info */
+ irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+ if (!irq_info)
+ panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+
+ if (pcidev_ptr->pdi_sn_irq_info) {
+ irq_info_prom = __va(pcidev_ptr->pdi_sn_irq_info);
+ memcpy(irq_info, irq_info_prom, sizeof(struct sn_irq_info));
+ }
+
+ *pcidev_info = pcidev_ptr;
+ *sn_irq_info = irq_info;
+
+exit:
+ kfree(buffer.pointer);
+ return ret;
+}
+
+static unsigned int
+get_host_devfn(acpi_handle device_handle, acpi_handle rootbus_handle)
+{
+ unsigned long adr;
+ acpi_handle child;
+ unsigned int devfn;
+ int function;
+ acpi_handle parent;
+ int slot;
+ acpi_status status;
+
+ /*
+ * Do an upward search to find the root bus device, and
+ * obtain the host devfn from the previous child device.
+ */
+ child = device_handle;
+ while (child) {
+ status = acpi_get_parent(child, &parent);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR "%s: acpi_get_parent() failed "
+ "(0x%x) for: ", __FUNCTION__, status);
+ acpi_ns_print_node_pathname(child, NULL);
+ printk("\n");
+ panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ }
+ if (parent == rootbus_handle)
+ break;
+ child = parent;
+ }
+ if (!child) {
+ printk(KERN_ERR "%s: Unable to find root bus for: ",
+ __FUNCTION__);
+ acpi_ns_print_node_pathname(device_handle, NULL);
+ printk("\n");
+ BUG();
+ }
+
+ status = acpi_evaluate_integer(child, METHOD_NAME__ADR, NULL, &adr);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR "%s: Unable to get _ADR (0x%x) for: ",
+ __FUNCTION__, status);
+ acpi_ns_print_node_pathname(child, NULL);
+ printk("\n");
+ panic("%s: Unable to find host devfn\n", __FUNCTION__);
+ }
+
+ slot = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+ devfn = PCI_DEVFN(slot, function);
+ return devfn;
+}
+
+/*
+ * find_matching_device - Callback routine to find the ACPI device
+ * that matches up with our pci_dev device.
+ * Matching is done on bus number and devfn.
+ * To find the bus number for a particular
+ * ACPI device, we must look at the _BBN method
+ * of its parent.
+ */
+static acpi_status
+find_matching_device(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ unsigned long bbn = -1;
+ unsigned long adr;
+ acpi_handle parent = NULL;
+ acpi_status status;
+ unsigned int devfn;
+ int function;
+ int slot;
+ struct sn_pcidev_match *info = context;
+
+ status = acpi_evaluate_integer(handle, METHOD_NAME__ADR, NULL,
+ &adr);
+ if (ACPI_SUCCESS(status)) {
+ status = acpi_get_parent(handle, &parent);
+ if (ACPI_FAILURE(status)) {
printk(KERN_ERR
- "sn_pci_fixup_bus: 0x%04x:0x%02x Unable to "
- "obtain prom_bussoft_ptr\n",
- pci_domain_nr(bus), bus->number);
- return;
+ "%s: acpi_get_parent() failed (0x%x) for: ",
+ __FUNCTION__, status);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ return AE_OK;
+ }
+ status = acpi_evaluate_integer(parent, METHOD_NAME__BBN,
+ NULL, &bbn);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR
+ "%s: Failed to find _BBN in parent of: ",
+ __FUNCTION__);
+ acpi_ns_print_node_pathname(handle, NULL);
+ printk("\n");
+ return AE_OK;
+ }
+
+ slot = (adr >> 16) & 0xffff;
+ function = adr & 0xffff;
+ devfn = PCI_DEVFN(slot, function);
+ if ((info->devfn == devfn) && (info->bus == bbn)) {
+ /* We have a match! */
+ info->handle = handle;
+ return 1;
}
- sn_common_bus_fixup(bus, prom_bussoft_ptr);
}
- list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_pci_fixup_slot(pci_dev);
+ return AE_OK;
+}
+
+/*
+ * sn_acpi_get_pcidev_info - Search ACPI namespace for the acpi
+ * device matching the specified pci_dev,
+ * and return the pcidev info and irq info.
+ */
+int
+sn_acpi_get_pcidev_info(struct pci_dev *dev, struct pcidev_info **pcidev_info,
+ struct sn_irq_info **sn_irq_info)
+{
+ unsigned int host_devfn;
+ struct sn_pcidev_match pcidev_match;
+ acpi_handle rootbus_handle;
+ unsigned long segment;
+ acpi_status status;
+
+ rootbus_handle = PCI_CONTROLLER(dev)->acpi_handle;
+ status = acpi_evaluate_integer(rootbus_handle, METHOD_NAME__SEG, NULL,
+ &segment);
+ if (ACPI_SUCCESS(status)) {
+ if (segment != pci_domain_nr(dev)) {
+ printk(KERN_ERR
+ "%s: Segment number mismatch, 0x%lx vs 0x%x for: ",
+ __FUNCTION__, segment, pci_domain_nr(dev));
+ acpi_ns_print_node_pathname(rootbus_handle, NULL);
+ printk("\n");
+ return 1;
+ }
+ } else {
+ printk(KERN_ERR "%s: Unable to get __SEG from: ",
+ __FUNCTION__);
+ acpi_ns_print_node_pathname(rootbus_handle, NULL);
+ printk("\n");
+ return 1;
+ }
+
+ /*
+ * We want to search all devices in this segment/domain
+ * of the ACPI namespace for the matching ACPI device,
+ * which holds the pcidev_info pointer in its vendor resource.
+ */
+ pcidev_match.bus = dev->bus->number;
+ pcidev_match.devfn = dev->devfn;
+ pcidev_match.handle = NULL;
+
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, rootbus_handle, ACPI_UINT32_MAX,
+ find_matching_device, &pcidev_match, NULL);
+
+ if (!pcidev_match.handle) {
+ printk(KERN_ERR
+ "%s: Could not find matching ACPI device for %s.\n",
+ __FUNCTION__, pci_name(dev));
+ return 1;
}
+
+ if (sn_extract_device_info(pcidev_match.handle, pcidev_info, sn_irq_info))
+ return 1;
+
+ /* Build up the pcidev_info.pdi_slot_host_handle */
+ host_devfn = get_host_devfn(pcidev_match.handle, rootbus_handle);
+ (*pcidev_info)->pdi_slot_host_handle =
+ ((unsigned long) pci_domain_nr(dev) << 40) |
+ /* bus == 0 */
+ host_devfn;
+ return 0;
}
/*
- * sn_acpi_slot_fixup - Perform any SN specific slot fixup.
+ * sn_acpi_slot_fixup - Obtain the pcidev_info and sn_irq_info.
+ * Perform any SN specific slot fixup.
* At present there does not appear to be
* any generic way to handle a ROM image
* that has been shadowed by the PROM, so
*/
void
-sn_acpi_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
+sn_acpi_slot_fixup(struct pci_dev *dev)
{
void __iomem *addr;
+ struct pcidev_info *pcidev_info = NULL;
+ struct sn_irq_info *sn_irq_info = NULL;
size_t size;
+ if (sn_acpi_get_pcidev_info(dev, &pcidev_info, &sn_irq_info)) {
+ panic("%s: Failure obtaining pcidev_info for %s\n",
+ __FUNCTION__, pci_name(dev));
+ }
+
if (pcidev_info->pdi_pio_mapped_addr[PCI_ROM_RESOURCE]) {
/*
* A valid ROM image exists and has been shadowed by the
(unsigned long) addr + size;
dev->resource[PCI_ROM_RESOURCE].flags |= IORESOURCE_ROM_BIOS_COPY;
}
+ sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
+EXPORT_SYMBOL(sn_acpi_slot_fixup);
+
static struct acpi_driver acpi_sn_hubdev_driver = {
.name = "SGI HUBDEV Driver",
.ids = "SGIHUB,SGITIO",
};
+/*
+ * sn_acpi_bus_fixup - Perform SN specific setup of software structs
+ * (pcibus_bussoft, pcidev_info) and hardware
+ * registers, for the specified bus and devices under it.
+ */
+void
+sn_acpi_bus_fixup(struct pci_bus *bus)
+{
+ struct pci_dev *pci_dev = NULL;
+ struct pcibus_bussoft *prom_bussoft_ptr;
+
+ if (!bus->parent) { /* If root bus */
+ prom_bussoft_ptr = sn_get_bussoft_ptr(bus);
+ if (prom_bussoft_ptr == NULL) {
+ printk(KERN_ERR
+ "%s: 0x%04x:0x%02x Unable to "
+ "obtain prom_bussoft_ptr\n",
+ __FUNCTION__, pci_domain_nr(bus), bus->number);
+ return;
+ }
+ sn_common_bus_fixup(bus, prom_bussoft_ptr);
+ }
+ list_for_each_entry(pci_dev, &bus->devices, bus_list) {
+ sn_acpi_slot_fixup(pci_dev);
+ }
+}
+
/*
* sn_io_acpi_init - PROM has ACPI support for IO, defining at a minimum the
* nodes and root buses in the DSDT. As a result, bus scanning
#include <linux/acpi.h>
#include <asm/sn/sn2/sn_hwperf.h>
#include <asm/sn/acpi.h>
+#include "acpi/acglobal.h"
extern void sn_init_cpei_timer(void);
extern void register_sn_procfs(void);
-extern void sn_acpi_bus_fixup(struct pci_bus *);
-extern void sn_bus_fixup(struct pci_bus *);
-extern void sn_acpi_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_more_slot_fixup(struct pci_dev *, struct pcidev_info *);
-extern void sn_legacy_pci_window_fixup(struct pci_controller *, u64, u64);
extern void sn_io_acpi_init(void);
extern void sn_io_init(void);
int sn_ioif_inited; /* SN I/O infrastructure initialized? */
+int sn_acpi_rev; /* SN ACPI revision */
+EXPORT_SYMBOL_GPL(sn_acpi_rev);
+
struct sn_pcibus_provider *sn_pci_provider[PCIIO_ASIC_MAX_TYPES]; /* indexed by asic type */
/*
return ret_stuff.status;
}
-/*
- * Retrieve the pci device information given the bus and device|function number.
- */
-static inline u64
-sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
- u64 sn_irq_info)
-{
- struct ia64_sal_retval ret_stuff;
- ret_stuff.status = 0;
- ret_stuff.v0 = 0;
-
- SAL_CALL_NOLOCK(ret_stuff,
- (u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
- (u64) segment, (u64) bus_number, (u64) devfn,
- (u64) pci_dev,
- sn_irq_info, 0, 0);
- return ret_stuff.v0;
-}
-
/*
* sn_pcidev_info_get() - Retrieve the pcidev_info struct for the specified
* device.
}
/*
- * sn_pci_fixup_slot() - This routine sets up a slot's resources consistent
- * with the Linux PCI abstraction layer. Resources
- * acquired from our PCI provider include PIO maps
- * to BAR space and interrupt objects.
+ * sn_pci_fixup_slot()
*/
-void sn_pci_fixup_slot(struct pci_dev *dev)
+void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *pcidev_info,
+ struct sn_irq_info *sn_irq_info)
{
int segment = pci_domain_nr(dev->bus);
- int status = 0;
struct pcibus_bussoft *bs;
- struct pci_bus *host_pci_bus;
- struct pci_dev *host_pci_dev;
- struct pcidev_info *pcidev_info;
- struct sn_irq_info *sn_irq_info;
- unsigned int bus_no, devfn;
+ struct pci_bus *host_pci_bus;
+ struct pci_dev *host_pci_dev;
+ unsigned int bus_no, devfn;
pci_dev_get(dev); /* for the sysdata pointer */
- pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
- if (!pcidev_info)
- BUG(); /* Cannot afford to run out of memory */
-
- sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (!sn_irq_info)
- BUG(); /* Cannot afford to run out of memory */
-
- /* Call to retrieve pci device information needed by kernel. */
- status = sal_get_pcidev_info((u64) segment, (u64) dev->bus->number,
- dev->devfn,
- (u64) __pa(pcidev_info),
- (u64) __pa(sn_irq_info));
- if (status)
- BUG(); /* Cannot get platform pci device information */
/* Add pcidev_info to list in pci_controller.platform_data */
list_add_tail(&pcidev_info->pdi_list,
&(SN_PLATFORM_DATA(dev->bus)->pcidev_info));
-
- if (SN_ACPI_BASE_SUPPORT())
- sn_acpi_slot_fixup(dev, pcidev_info);
- else
- sn_more_slot_fixup(dev, pcidev_info);
/*
* Using the PROMs values for the PCI host bus, get the Linux
- * PCI host_pci_dev struct and set up host bus linkages
+ * PCI host_pci_dev struct and set up host bus linkages
*/
bus_no = (pcidev_info->pdi_slot_host_handle >> 32) & 0xff;
sprintf(address, "%s^%d", address, geo_slot(geoid));
}
-/*
- * sn_pci_fixup_bus() - Perform SN specific setup of software structs
- * (pcibus_bussoft, pcidev_info) and hardware
- * registers, for the specified bus and devices under it.
- */
void __devinit
sn_pci_fixup_bus(struct pci_bus *bus)
{
if (!ia64_platform_is("sn2") || IS_RUNNING_ON_FAKE_PROM())
return 0;
+ /* we set the acpi revision to that of the DSDT table OEM rev. */
+ {
+ struct acpi_table_header *header = NULL;
+
+ acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header);
+ BUG_ON(header == NULL);
+ sn_acpi_rev = header->oem_revision;
+ }
+
/*
* prime sn_pci_provider[]. Individial provider init routines will
* override their respective default entries.
register_sn_procfs();
#endif
- printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n",
- acpi_gbl_DSDT->oem_revision);
+ {
+ struct acpi_table_header *header;
+ (void)acpi_get_table_by_index(ACPI_TABLE_INDEX_DSDT, &header);
+ printk(KERN_INFO "ACPI DSDT OEM Rev 0x%x\n",
+ header->oem_revision);
+ }
if (SN_ACPI_BASE_SUPPORT())
sn_io_acpi_init();
else
fs_initcall(sn_io_late_init);
-EXPORT_SYMBOL(sn_pci_fixup_slot);
EXPORT_SYMBOL(sn_pci_unfixup_slot);
EXPORT_SYMBOL(sn_bus_store_sysdata);
EXPORT_SYMBOL(sn_bus_free_sysdata);
return ret_stuff.v0;
}
+/*
+ * Retrieve the pci device information given the bus and device|function number.
+ */
+static inline u64
+sal_get_pcidev_info(u64 segment, u64 bus_number, u64 devfn, u64 pci_dev,
+ u64 sn_irq_info)
+{
+ struct ia64_sal_retval ret_stuff;
+ ret_stuff.status = 0;
+ ret_stuff.v0 = 0;
+
+ SAL_CALL_NOLOCK(ret_stuff,
+ (u64) SN_SAL_IOIF_GET_PCIDEV_INFO,
+ (u64) segment, (u64) bus_number, (u64) devfn,
+ (u64) pci_dev,
+ sn_irq_info, 0, 0);
+ return ret_stuff.v0;
+}
+
/*
* sn_fixup_ionodes() - This routine initializes the HUB data structure for
}
/*
- * sn_more_slot_fixup() - We are not running with an ACPI capable PROM,
+ * sn_io_slot_fixup() - We are not running with an ACPI capable PROM,
* and need to convert the pci_dev->resource
* 'start' and 'end' addresses to mapped addresses,
* and setup the pci_controller->window array entries.
*/
void
-sn_more_slot_fixup(struct pci_dev *dev, struct pcidev_info *pcidev_info)
+sn_io_slot_fixup(struct pci_dev *dev)
{
unsigned int count = 0;
int idx;
s64 pci_addrs[PCI_ROM_RESOURCE + 1];
unsigned long addr, end, size, start;
+ struct pcidev_info *pcidev_info;
+ struct sn_irq_info *sn_irq_info;
+ int status;
+
+ pcidev_info = kzalloc(sizeof(struct pcidev_info), GFP_KERNEL);
+ if (!pcidev_info)
+ panic("%s: Unable to alloc memory for pcidev_info", __FUNCTION__);
+
+ sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
+ if (!sn_irq_info)
+ panic("%s: Unable to alloc memory for sn_irq_info", __FUNCTION__);
+
+ /* Call to retrieve pci device information needed by kernel. */
+ status = sal_get_pcidev_info((u64) pci_domain_nr(dev),
+ (u64) dev->bus->number,
+ dev->devfn,
+ (u64) __pa(pcidev_info),
+ (u64) __pa(sn_irq_info));
+
+ if (status)
+ BUG(); /* Cannot get platform pci device information */
+
/* Copy over PIO Mapped Addresses */
for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
*/
if (count > 0)
sn_pci_window_fixup(dev, count, pci_addrs);
+
+ sn_pci_fixup_slot(dev, pcidev_info, sn_irq_info);
}
+EXPORT_SYMBOL(sn_io_slot_fixup);
+
/*
* sn_pci_controller_fixup() - This routine sets up a bus's resources
* consistent with the Linux PCI abstraction layer.
{
struct pci_dev *pci_dev = NULL;
struct pcibus_bussoft *prom_bussoft_ptr;
- extern void sn_common_bus_fixup(struct pci_bus *,
- struct pcibus_bussoft *);
-
if (!bus->parent) { /* If root bus */
prom_bussoft_ptr = PCI_CONTROLLER(bus)->platform_data;
prom_bussoft_ptr->bs_legacy_mem);
}
list_for_each_entry(pci_dev, &bus->devices, bus_list) {
- sn_pci_fixup_slot(pci_dev);
+ sn_io_slot_fixup(pci_dev);
}
}
-/*
+/*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
* @port: port to convert
*
* Legacy in/out instructions are converted to ld/st instructions
- * on IA64. This routine will convert a port number into a valid
+ * on IA64. This routine will convert a port number into a valid
* SN i/o address. Used by sn_in*() and sn_out*().
*/
+
void *sn_io_addr(unsigned long port)
{
if (!IS_RUNNING_ON_SIMULATOR()) {
sn_intr_free(nasid, widget, sn_irq_info);
sn_msi_info[irq].sn_irq_info = NULL;
- return;
+ destroy_irq(irq);
}
-int sn_setup_msi_irq(unsigned int irq, struct pci_dev *pdev)
+int sn_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *entry)
{
struct msi_msg msg;
- struct msi_desc *entry;
int widget;
int status;
nasid_t nasid;
struct sn_irq_info *sn_irq_info;
struct pcibus_bussoft *bussoft = SN_PCIDEV_BUSSOFT(pdev);
struct sn_pcibus_provider *provider = SN_PCIDEV_BUSPROVIDER(pdev);
+ int irq;
- entry = get_irq_data(irq);
if (!entry->msi_attrib.is_64)
return -EINVAL;
if (provider == NULL || provider->dma_map_consistent == NULL)
return -EINVAL;
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, entry);
/*
* Set up the vector plumbing. Let the prom (via sn_intr_alloc)
* decide which cpu to direct this msi at by default.
SWIN_WIDGETNUM(bussoft->bs_base);
sn_irq_info = kzalloc(sizeof(struct sn_irq_info), GFP_KERNEL);
- if (! sn_irq_info)
+ if (! sn_irq_info) {
+ destroy_irq(irq);
return -ENOMEM;
+ }
status = sn_intr_alloc(nasid, widget, sn_irq_info, irq, -1, -1);
if (status) {
kfree(sn_irq_info);
+ destroy_irq(irq);
return -ENOMEM;
}
if (! bus_addr) {
sn_intr_free(nasid, widget, sn_irq_info);
kfree(sn_irq_info);
+ destroy_irq(irq);
return -ENOMEM;
}
write_msi_msg(irq, &msg);
set_irq_chip_and_handler(irq, &sn_msi_chip, handle_edge_irq);
- return 0;
+ return irq;
}
#ifdef CONFIG_SMP
#include "xtalk/hubdev.h"
int
-sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp)
+sal_pcibr_slot_enable(struct pcibus_info *soft, int device, void *resp,
+ char **ssdt)
{
struct ia64_sal_retval ret_stuff;
u64 busnum;
segment = soft->pbi_buscommon.bs_persist_segment;
busnum = soft->pbi_buscommon.bs_persist_busnum;
SAL_CALL_NOLOCK(ret_stuff, (u64) SN_SAL_IOIF_SLOT_ENABLE, segment,
- busnum, (u64) device, (u64) resp, 0, 0, 0);
+ busnum, (u64) device, (u64) resp, (u64)ia64_tpa(ssdt),
+ 0, 0);
return (int)ret_stuff.v0;
}
select DMA_IP27
select EARLY_PRINTK
select HW_HAS_PCI
+ select NR_CPUS_DEFAULT_64
select PCI_DOMAINS
select SYS_HAS_CPU_R10000
select SYS_SUPPORTS_64BIT_KERNEL
bool "Sibyte BCM91480B-BigSur"
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_4
select PCI_DOMAINS
select SIBYTE_BCM1x80
select SWAP_IO_SPACE
bool "Sibyte BCM91250A-SWARM"
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
depends on EXPERIMENTAL
select BOOT_ELF32
select DMA_COHERENT
+ select NR_CPUS_DEFAULT_2
select SIBYTE_SB1250
select SWAP_IO_SPACE
select SYS_HAS_CPU_SB1
endchoice
-config KEXEC
- bool "Kexec system call (EXPERIMENTAL)"
- depends on EXPERIMENTAL
- help
- kexec is a system call that implements the ability to shutdown your
- current kernel, and to start another kernel. It is like a reboot
- but it is indepedent of the system firmware. And like a reboot
- you can start any kernel with it, not just Linux.
-
- The name comes from the similiarity to the exec system call.
-
- It is an ongoing process to be certain the hardware in a machine
- is properly shutdown, so do not be surprised if this code does not
- initially work for you. It may help to enable device hotplugging
- support. As of this writing the exact hardware interface is
- strongly in flux, so no good recommendation can be made.
-
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
select CPU_MIPSR2_IRQ_VI
select CPU_MIPSR2_SRS
select MIPS_MT
+ select NR_CPUS_DEFAULT_2
+ select NR_CPUS_DEFAULT_8
select SMP
select SYS_SUPPORTS_SMP
help
config SYS_SUPPORTS_SMP
bool
+config NR_CPUS_DEFAULT_2
+ bool
+
+config NR_CPUS_DEFAULT_4
+ bool
+
+config NR_CPUS_DEFAULT_8
+ bool
+
+config NR_CPUS_DEFAULT_16
+ bool
+
+config NR_CPUS_DEFAULT_32
+ bool
+
+config NR_CPUS_DEFAULT_64
+ bool
+
config NR_CPUS
int "Maximum number of CPUs (2-64)"
range 2 64
depends on SMP
- default "64" if SGI_IP27
- default "2"
- default "8" if MIPS_MT_SMTC
+ default "2" if NR_CPUS_DEFAULT_2
+ default "4" if NR_CPUS_DEFAULT_4
+ default "8" if NR_CPUS_DEFAULT_8
+ default "16" if NR_CPUS_DEFAULT_16
+ default "32" if NR_CPUS_DEFAULT_32
+ default "64" if NR_CPUS_DEFAULT_64
help
This allows you to specify the maximum number of CPUs which this
kernel will support. The maximum supported value is 32 for 32-bit
This will result in additional memory usage, so it is not
recommended for normal users.
+config KEXEC
+ bool "Kexec system call (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ kexec is a system call that implements the ability to shutdown your
+ current kernel, and to start another kernel. It is like a reboot
+ but it is indepedent of the system firmware. And like a reboot
+ you can start any kernel with it, not just Linux.
+
+ The name comes from the similiarity to the exec system call.
+
+ It is an ongoing process to be certain the hardware in a machine
+ is properly shutdown, so do not be surprised if this code does not
+ initially work for you. It may help to enable device hotplugging
+ support. As of this writing the exact hardware interface is
+ strongly in flux, so no good recommendation can be made.
+
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ depends on PROC_FS && BROKEN
+ default y
+ help
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via /proc/<pid>/seccomp, it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
+ If unsure, say Y. Only embedded should say N here.
+
endmenu
config RWSEM_GENERIC_SPINLOCK
bool
default y if MIPS32_O32 || MIPS32_N32
-config SECCOMP
- bool "Enable seccomp to safely compute untrusted bytecode"
- depends on PROC_FS && BROKEN
- default y
- help
- This kernel feature is useful for number crunching applications
- that may need to compute untrusted bytecode during their
- execution. By using pipes or other transports made available to
- the process as file descriptors supporting the read/write
- syscalls, it's possible to isolate those applications in
- their own address space using seccomp. Once seccomp is
- enabled via /proc/<pid>/seccomp, it cannot be disabled
- and the task is only allowed to execute a few safe syscalls
- defined by each seccomp mode.
-
- If unsure, say Y. Only embedded should say N here.
-
config PM
bool "Power Management support (EXPERIMENTAL)"
depends on EXPERIMENTAL && SOC_AU1X00
string "Default kernel command string"
default ""
help
- On some platforms, there is currently no way for the boot loader to
- pass arguments to the kernel. For these platforms, you can supply
- some command-line options at build time by entering them here. In
- other cases you can specify kernel args so that you don't have
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ other cases you can specify kernel args so that you don't have
to set them up in board prom initialization routines.
config DEBUG_STACK_USAGE
{
int i;
- for (i = 0; i < (sizeof(mach_table) / sizeof (mach_table[0])); i++) {
+ for (i = 0; i < ARRAY_SIZE(mach_table); i++) {
if (!strcmp(s, mach_table[i].arcname))
return &mach_table[i];
}
}
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- unsigned long freed = 0;
unsigned long addr;
int i;
if (prom_flags & PROM_FLAG_DONT_FREE_TEMP)
- return 0;
+ return;
for (i = 0; i < boot_mem_map.nr_map; i++) {
if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
continue;
addr = boot_mem_map.map[i].addr;
- while (addr < boot_mem_map.map[i].addr
- + boot_mem_map.map[i].size) {
- ClearPageReserved(virt_to_page(__va(addr)));
- init_page_count(virt_to_page(__va(addr)));
- free_page((unsigned long)__va(addr));
- addr += PAGE_SIZE;
- freed += PAGE_SIZE;
- }
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
}
- printk(KERN_INFO "Freeing prom memory: %ldkb freed\n", freed >> 10);
-
- return freed;
}
static struct irq_chip rise_edge_irq_type = {
- .typename = "Au1000 Rise Edge",
+ .name = "Au1000 Rise Edge",
.ack = mask_and_ack_rise_edge_irq,
.mask = local_disable_irq,
.mask_ack = mask_and_ack_rise_edge_irq,
};
static struct irq_chip fall_edge_irq_type = {
- .typename = "Au1000 Fall Edge",
+ .name = "Au1000 Fall Edge",
.ack = mask_and_ack_fall_edge_irq,
.mask = local_disable_irq,
.mask_ack = mask_and_ack_fall_edge_irq,
};
static struct irq_chip either_edge_irq_type = {
- .typename = "Au1000 Rise or Fall Edge",
+ .name = "Au1000 Rise or Fall Edge",
.ack = mask_and_ack_either_edge_irq,
.mask = local_disable_irq,
.mask_ack = mask_and_ack_either_edge_irq,
};
static struct irq_chip level_irq_type = {
- .typename = "Au1000 Level",
+ .name = "Au1000 Level",
.ack = mask_and_ack_level_irq,
.mask = local_disable_irq,
.mask_ack = mask_and_ack_level_irq,
}
#ifdef CONFIG_DMA_NONCOHERENT
- /*
- * Set the NC bit in controller for Au1500 pre-AC silicon
- */
- u32 prid = read_c0_prid();
- if ( (prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
- au_writel( 1<<16 | au_readl(Au1500_PCI_CFG), Au1500_PCI_CFG);
- printk("Non-coherent PCI accesses enabled\n");
+ {
+ /*
+ * Set the NC bit in controller for Au1500 pre-AC silicon
+ */
+ u32 prid = read_c0_prid();
+
+ if ((prid & 0xFF000000) == 0x01000000 && prid < 0x01030202) {
+ au_writel((1 << 16) | au_readl(Au1500_PCI_CFG),
+ Au1500_PCI_CFG);
+ printk("Non-coherent PCI accesses enabled\n");
+ }
}
#endif
return 0;
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
EXPORT_SYMBOL(prom_getcmdline);
/* This routine should be valid for all Au1x based boards */
phys_t __fixup_bigphys_addr(phys_t phys_addr, phys_t size)
{
- u32 start, end;
-
/* Don't fixup 36 bit addresses */
- if ((phys_addr >> 32) != 0) return phys_addr;
+ if ((phys_addr >> 32) != 0)
+ return phys_addr;
#ifdef CONFIG_PCI
- start = (u32)Au1500_PCI_MEM_START;
- end = (u32)Au1500_PCI_MEM_END;
- /* check for pci memory window */
- if ((phys_addr >= start) && ((phys_addr + size) < end)) {
- return (phys_t)((phys_addr - start) + Au1500_PCI_MEM_START);
+ {
+ u32 start, end;
+
+ start = (u32)Au1500_PCI_MEM_START;
+ end = (u32)Au1500_PCI_MEM_END;
+ /* check for pci memory window */
+ if ((phys_addr >= start) && ((phys_addr + size) < end))
+ return (phys_t)
+ ((phys_addr - start) + Au1500_PCI_MEM_START);
}
#endif
void __init board_setup(void)
{
- u32 pin_func;
- u32 sys_freqctrl, sys_clksrc;
+ volatile void __iomem * base = (volatile void __iomem *) 0xac000000UL;
// set AUX clock to 12MHz * 8 = 96 MHz
au_writel(8, SYS_AUXPLL);
udelay(100);
#ifdef CONFIG_USB_OHCI
- // configure pins GPIO[14:9] as GPIO
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
-
- /* zero and disable FREQ2 */
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /* zero and disable USBH/USBD/IrDA clock */
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- sys_freqctrl = au_readl(SYS_FREQCTRL0);
- sys_freqctrl &= ~0xFFF00000;
-
- sys_clksrc = au_readl(SYS_CLKSRC);
- sys_clksrc &= ~0x0000001F;
-
- // FREQ2 = aux/2 = 48 MHz
- sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
- au_writel(sys_freqctrl, SYS_FREQCTRL0);
-
- /*
- * Route 48MHz FREQ2 into USBH/USBD/IrDA
- */
- sys_clksrc |= ((4<<2) | (0<<1) | 0 );
- au_writel(sys_clksrc, SYS_CLKSRC);
-
- /* setup the static bus controller */
- au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
- au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
- au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
-
- // get USB Functionality pin state (device vs host drive pins)
- pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
- // 2nd USB port is USB host
- pin_func |= 0x8000;
- au_writel(pin_func, SYS_PINFUNC);
+ {
+ u32 pin_func, sys_freqctrl, sys_clksrc;
+
+ // configure pins GPIO[14:9] as GPIO
+ pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x80);
+
+ /* zero and disable FREQ2 */
+ sys_freqctrl = au_readl(SYS_FREQCTRL0);
+ sys_freqctrl &= ~0xFFF00000;
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+ /* zero and disable USBH/USBD/IrDA clock */
+ sys_clksrc = au_readl(SYS_CLKSRC);
+ sys_clksrc &= ~0x0000001F;
+ au_writel(sys_clksrc, SYS_CLKSRC);
+
+ sys_freqctrl = au_readl(SYS_FREQCTRL0);
+ sys_freqctrl &= ~0xFFF00000;
+
+ sys_clksrc = au_readl(SYS_CLKSRC);
+ sys_clksrc &= ~0x0000001F;
+
+ // FREQ2 = aux/2 = 48 MHz
+ sys_freqctrl |= ((0<<22) | (1<<21) | (1<<20));
+ au_writel(sys_freqctrl, SYS_FREQCTRL0);
+
+ /*
+ * Route 48MHz FREQ2 into USBH/USBD/IrDA
+ */
+ sys_clksrc |= ((4<<2) | (0<<1) | 0 );
+ au_writel(sys_clksrc, SYS_CLKSRC);
+
+ /* setup the static bus controller */
+ au_writel(0x00000002, MEM_STCFG3); /* type = PCMCIA */
+ au_writel(0x280E3D07, MEM_STTIME3); /* 250ns cycle time */
+ au_writel(0x10000000, MEM_STADDR3); /* any PCMCIA select */
+
+ // get USB Functionality pin state (device vs host drive pins)
+ pin_func = au_readl(SYS_PINFUNC) & (u32)(~0x8000);
+ // 2nd USB port is USB host
+ pin_func |= 0x8000;
+ au_writel(pin_func, SYS_PINFUNC);
+ }
#endif // defined (CONFIG_USB_OHCI)
/* Enable sys bus clock divider when IDLE state or no bus activity. */
au_writel(au_readl(SYS_POWERCTRL) | (0x3 << 5), SYS_POWERCTRL);
// Enable the RTC if not already enabled
- if (!(readb(0xac000028) & 0x20)) {
- writeb(readb(0xac000028) | 0x20, 0xac000028);
+ if (!(readb(base + 0x28) & 0x20)) {
+ writeb(readb(base + 0x28) | 0x20, base + 0x28);
au_sync();
}
// Put the clock in BCD mode
- if (readb(0xac00002C) & 0x4) { /* reg B */
- writeb(readb(0xac00002c) & ~0x4, 0xac00002c);
+ if (readb(base + 0x2C) & 0x4) { /* reg B */
+ writeb(readb(base + 0x2c) & ~0x4, base + 0x2c);
au_sync();
}
}
return;
}
-static inline void pb1200_mask_and_ack_irq(unsigned int irq_nr)
-{
- pb1200_disable_irq( irq_nr );
-}
-
-static void pb1200_end_irq(unsigned int irq_nr)
-{
- if (!(irq_desc[irq_nr].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
- pb1200_enable_irq(irq_nr);
- }
-}
-
static struct irq_chip external_irq_type =
{
#ifdef CONFIG_MIPS_PB1200
- "Pb1200 Ext",
+ .name = "Pb1200 Ext",
#endif
#ifdef CONFIG_MIPS_DB1200
- "Db1200 Ext",
+ .name = "Db1200 Ext",
#endif
- pb1200_startup_irq,
- pb1200_shutdown_irq,
- pb1200_enable_irq,
- pb1200_disable_irq,
- pb1200_mask_and_ack_irq,
- pb1200_end_irq,
- NULL
+ .startup = pb1200_startup_irq,
+ .shutdown = pb1200_shutdown_irq,
+ .ack = pb1200_disable_irq,
+ .mask = pb1200_disable_irq,
+ .mask_ack = pb1200_disable_irq,
+ .unmask = pb1200_enable_irq,
};
void _board_init_irq(void)
for (irq_nr = PB1200_INT_BEGIN; irq_nr <= PB1200_INT_END; irq_nr++)
{
- irq_desc[irq_nr].chip = &external_irq_type;
+ set_irq_chip_and_handler(irq_nr, &external_irq_type,
+ handle_level_irq);
pb1200_disable_irq(irq_nr);
}
*/
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
- rm9k_cpu_irq_init(12);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
+ rm9k_cpu_irq_init();
#ifdef CONFIG_KGDB
excite_kgdb_init();
GT_WRITE(GT_INTRMASK_OFS, 0);
init_i8259_irqs(); /* 0 ... 15 */
- mips_cpu_irq_init(COBALT_CPU_IRQ); /* 16 ... 23 */
+ mips_cpu_irq_init(); /* 16 ... 23 */
/*
* Mask all cpu interrupts
add_memory_region(0x0, memsz, BOOT_MEM_RAM);
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
/* Nothing to do! */
- return 0;
}
#endif
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
#if defined(CONFIG_DDB5477)
#include <linux/ptrace.h>
#include <asm/i8259.h>
+#include <asm/irq_cpu.h>
#include <asm/system.h>
#include <asm/mipsregs.h>
#include <asm/debug.h>
}
extern void vrc5477_irq_init(u32 base);
-extern void mips_cpu_irq_init(u32 base);
static struct irqaction irq_cascade = { no_action, 0, CPU_MASK_NONE, "cascade", NULL, NULL };
void __init arch_init_irq(void)
/* init all controllers */
init_i8259_irqs();
- mips_cpu_irq_init(CPU_IRQ_BASE);
+ mips_cpu_irq_init();
vrc5477_irq_init(VRC5477_IRQ_BASE);
irq = *(volatile u8 *) KSEG1ADDR(DDB_PCI_IACK_BASE);
ddb_out32(DDB_PCIINIT10, reg);
- /* i8259.c set the base vector to be 0x0 */
- return irq + I8259_IRQ_BASE;
+ return irq;
}
/*
* the first level int-handler will jump here if it is a vrc5477 irq
/* check for i8259 interrupts */
if (intStatus & (1 << VRC5477_I8259_CASCADE)) {
int i8259_irq = i8259_interrupt_ack();
- do_IRQ(I8259_IRQ_BASE + i8259_irq);
+ do_IRQ(i8259_irq);
return;
}
}
}
struct irq_chip vrc5477_irq_controller = {
- .typename = "vrc5477_irq",
+ .name = "vrc5477_irq",
.ack = vrc5477_irq_ack,
.mask = vrc5477_irq_disable,
.mask_ack = vrc5477_irq_ack,
}
static struct irq_chip ioasic_irq_type = {
- .typename = "IO-ASIC",
+ .name = "IO-ASIC",
.ack = ack_ioasic_irq,
.mask = mask_ioasic_irq,
.mask_ack = ack_ioasic_irq,
}
static struct irq_chip ioasic_dma_irq_type = {
- .typename = "IO-ASIC-DMA",
+ .name = "IO-ASIC-DMA",
.ack = ack_ioasic_dma_irq,
.mask = mask_ioasic_dma_irq,
.mask_ack = ack_ioasic_dma_irq,
}
static struct irq_chip kn02_irq_type = {
- .typename = "KN02-CSR",
+ .name = "KN02-CSR",
.ack = ack_kn02_irq,
.mask = mask_kn02_irq,
.mask_ack = ack_kn02_irq,
rex_setup_memory_region();
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- unsigned long addr, end;
+ unsigned long end;
/*
* Free everything below the kernel itself but leave
#endif
end = __pa(&_text);
- addr = PAGE_SIZE;
- while (addr < end) {
- ClearPageReserved(virt_to_page(__va(addr)));
- init_page_count(virt_to_page(__va(addr)));
- free_page((unsigned long)__va(addr));
- addr += PAGE_SIZE;
- }
-
- printk("Freeing unused PROM memory: %ldkb freed\n",
- (end - PAGE_SIZE) >> 10);
-
- return end - PAGE_SIZE;
+ free_init_pages("unused PROM memory", PAGE_SIZE, end);
}
memcpy(&cpu_mask_nr_tbl, &kn01_cpu_mask_nr_tbl,
sizeof(kn01_cpu_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
} /* dec_init_kn01 */
memcpy(&cpu_mask_nr_tbl, &kn230_cpu_mask_nr_tbl,
sizeof(kn230_cpu_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
} /* dec_init_kn230 */
memcpy(&asic_mask_nr_tbl, &kn02_asic_mask_nr_tbl,
sizeof(kn02_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_kn02_irqs(KN02_IRQ_BASE);
} /* dec_init_kn02 */
memcpy(&asic_mask_nr_tbl, &kn02ba_asic_mask_nr_tbl,
sizeof(kn02ba_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ba */
memcpy(&asic_mask_nr_tbl, &kn02ca_asic_mask_nr_tbl,
sizeof(kn02ca_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn02ca */
memcpy(&asic_mask_nr_tbl, &kn03_asic_mask_nr_tbl,
sizeof(kn03_asic_mask_nr_tbl));
- mips_cpu_irq_init(DEC_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
init_ioasic_irqs(IO_IRQ_BASE);
} /* dec_init_kn03 */
}
struct irq_chip emma2rh_irq_controller = {
- .typename = "emma2rh_irq",
+ .name = "emma2rh_irq",
.ack = emma2rh_irq_disable,
.mask = emma2rh_irq_disable,
.mask_ack = emma2rh_irq_disable,
emma2rh_irq_init(EMMA2RH_IRQ_BASE);
emma2rh_sw_irq_init(EMMA2RH_SW_IRQ_BASE);
emma2rh_gpio_irq_init(EMMA2RH_GPIO_IRQ_BASE);
- mips_cpu_irq_init(CPU_IRQ_BASE);
+ mips_cpu_irq_init();
/* setup cascade interrupts */
setup_irq(EMMA2RH_IRQ_BASE + EMMA2RH_SW_CASCADE, &irq_cascade);
}
struct irq_chip emma2rh_sw_irq_controller = {
- .typename = "emma2rh_sw_irq",
+ .name = "emma2rh_sw_irq",
.ack = emma2rh_sw_irq_disable,
.mask = emma2rh_sw_irq_disable,
.mask_ack = emma2rh_sw_irq_disable,
}
struct irq_chip emma2rh_gpio_irq_controller = {
- .typename = "emma2rh_gpio_irq",
+ .name = "emma2rh_gpio_irq",
.ack = emma2rh_gpio_irq_ack,
.mask = emma2rh_gpio_irq_disable,
.mask_ack = emma2rh_gpio_irq_ack,
}
static struct irq_chip ev64120_irq_type = {
- .typename = "EV64120",
+ .name = "EV64120",
.ack = disable_ev64120_irq,
.mask = disable_ev64120_irq,
.mask_ack = disable_ev64120_irq,
*/
extern struct pci_ops galileo_pci_ops;
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
/*
-#ifdef CONFIG_KGDB
-
#include <asm/serial.h> /* For the serial port location and base baud */
/* --- CONFIG --- */
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
-
-#endif
clear_c0_status(ST0_IM);
local_irq_disable();
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
}
add_memory_region(0, 64 << 20, BOOT_MEM_RAM);
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
void __init arch_init_irq(void)
{
/* IRQ 0 - 7 are for MIPS common irq_cpu controller */
- mips_cpu_irq_init(0);
+ mips_cpu_irq_init();
gt64120_init_pic();
}
}
#endif /* WRPPMC_EARLY_DEBUG */
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
#ifdef CONFIG_SERIAL_8250
}
static struct irq_chip r4030_irq_type = {
- .typename = "R4030",
+ .name = "R4030",
.ack = disable_r4030_irq,
.mask = disable_r4030_irq,
.mask_ack = disable_r4030_irq,
*cp = '\0';
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
}
static struct irq_chip jmr3927_irq_controller = {
- .typename = "jmr3927_irq",
+ .name = "jmr3927_irq",
.ack = jmr3927_irq_ack,
.mask = jmr3927_irq_disable,
.mask_ack = jmr3927_irq_ack,
/* DMA */
tx3927_dmaptr->mcr = 0;
- for (i = 0; i < sizeof(tx3927_dmaptr->ch) / sizeof(tx3927_dmaptr->ch[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(tx3927_dmaptr->ch); i++) {
/* reset channel */
tx3927_dmaptr->ch[i].ccr = TX3927_DMA_CCR_CHRST;
tx3927_dmaptr->ch[i].ccr = 0;
constant("#define _PMD_SHIFT ", PMD_SHIFT);
constant("#define _PGDIR_SHIFT ", PGDIR_SHIFT);
linefeed;
- constant("#define _PGD_ORDER ", PGD_ORDER);
- constant("#define _PMD_ORDER ", PMD_ORDER);
- constant("#define _PTE_ORDER ", PTE_ORDER);
- linefeed;
constant("#define _PTRS_PER_PGD ", PTRS_PER_PGD);
constant("#define _PTRS_PER_PMD ", PTRS_PER_PMD);
constant("#define _PTRS_PER_PTE ", PTRS_PER_PTE);
if (config3 & MIPS_CONF3_VEIC)
c->options |= MIPS_CPU_VEIC;
if (config3 & MIPS_CONF3_MT)
- c->ases |= MIPS_ASE_MIPSMT;
+ c->ases |= MIPS_ASE_MIPSMT;
return config3 & MIPS_CONF_M;
}
*/
printk("$0 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
regs->reg0, regs->reg1, regs->reg2, regs->reg3,
- regs->reg4, regs->reg5, regs->reg6, regs->reg7);
+ regs->reg4, regs->reg5, regs->reg6, regs->reg7);
printk("$8 : %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
regs->reg8, regs->reg9, regs->reg10, regs->reg11,
- regs->reg12, regs->reg13, regs->reg14, regs->reg15);
+ regs->reg12, regs->reg13, regs->reg14, regs->reg15);
printk("$16: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
regs->reg16, regs->reg17, regs->reg18, regs->reg19,
- regs->reg20, regs->reg21, regs->reg22, regs->reg23);
+ regs->reg20, regs->reg21, regs->reg22, regs->reg23);
printk("$24: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
regs->reg24, regs->reg25, regs->reg26, regs->reg27,
regs->reg28, regs->reg29, regs->reg30, regs->reg31);
#endif /* CONFIG_SMP */
__FINIT
-
- .comm kernelsp, NR_CPUS * 8, 8
- .comm pgd_current, NR_CPUS * 8, 8
-
- .comm fw_arg0, SZREG, SZREG # firmware arguments
- .comm fw_arg1, SZREG, SZREG
- .comm fw_arg2, SZREG, SZREG
- .comm fw_arg3, SZREG, SZREG
-
- .macro page name, order
- .comm \name, (_PAGE_SIZE << \order), (_PAGE_SIZE << \order)
- .endm
-
- /*
- * On 64-bit we've got three-level pagetables with a slightly
- * different layout ...
- */
- page swapper_pg_dir, _PGD_ORDER
-#ifdef CONFIG_64BIT
-#if defined(CONFIG_MODULES) && !defined(CONFIG_BUILD_ELF64)
- page module_pg_dir, _PGD_ORDER
-#endif
- page invalid_pmd_table, _PMD_ORDER
-#endif
- page invalid_pte_table, _PTE_ORDER
void disable_8259A_irq(unsigned int irq)
{
- unsigned int mask = 1 << irq;
+ unsigned int mask;
unsigned long flags;
+ irq -= I8259A_IRQ_BASE;
+ mask = 1 << irq;
spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask |= mask;
if (irq & 8)
void enable_8259A_irq(unsigned int irq)
{
- unsigned int mask = ~(1 << irq);
+ unsigned int mask;
unsigned long flags;
+ irq -= I8259A_IRQ_BASE;
+ mask = ~(1 << irq);
spin_lock_irqsave(&i8259A_lock, flags);
cached_irq_mask &= mask;
if (irq & 8)
int i8259A_irq_pending(unsigned int irq)
{
- unsigned int mask = 1 << irq;
+ unsigned int mask;
unsigned long flags;
int ret;
+ irq -= I8259A_IRQ_BASE;
+ mask = 1 << irq;
spin_lock_irqsave(&i8259A_lock, flags);
if (irq < 8)
ret = inb(PIC_MASTER_CMD) & mask;
*/
void mask_and_ack_8259A(unsigned int irq)
{
- unsigned int irqmask = 1 << irq;
+ unsigned int irqmask;
unsigned long flags;
+ irq -= I8259A_IRQ_BASE;
+ irqmask = 1 << irq;
spin_lock_irqsave(&i8259A_lock, flags);
/*
* Lightweight spurious IRQ detection. We do not want
outb(0x60+irq,PIC_MASTER_CMD); /* 'Specific EOI to master */
}
#ifdef CONFIG_MIPS_MT_SMTC
- if (irq_hwmask[irq] & ST0_IM)
- set_c0_status(irq_hwmask[irq] & ST0_IM);
+ if (irq_hwmask[irq] & ST0_IM)
+ set_c0_status(irq_hwmask[irq] & ST0_IM);
#endif /* CONFIG_MIPS_MT_SMTC */
spin_unlock_irqrestore(&i8259A_lock, flags);
return;
init_8259A(0);
- for (i = 0; i < 16; i++)
+ for (i = I8259A_IRQ_BASE; i < I8259A_IRQ_BASE + 16; i++)
set_irq_chip_and_handler(i, &i8259A_chip, handle_level_irq);
- setup_irq(PIC_CASCADE_IR, &irq2);
+ setup_irq(I8259A_IRQ_BASE + PIC_CASCADE_IR, &irq2);
}
* Copyright (C) 1996 - 2004 David S. Miller <dm@engr.sgi.com>
* Copyright (C) 2004 - 2005 Steven J. Hill <sjhill@realitydiluted.com>
*/
+#undef DEBUG
+
#include <linux/module.h>
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/elf.h>
-#undef DEBUG
-
static int load_irix_binary(struct linux_binprm * bprm, struct pt_regs * regs);
static int load_irix_library(struct file *);
static int irix_core_dump(long signr, struct pt_regs * regs,
irix_core_dump, PAGE_SIZE
};
-#ifdef DEBUG
/* Debugging routines. */
static char *get_elf_p_type(Elf32_Word p_type)
{
- int i = (int) p_type;
-
- switch(i) {
- case PT_NULL: return("PT_NULL"); break;
- case PT_LOAD: return("PT_LOAD"); break;
- case PT_DYNAMIC: return("PT_DYNAMIC"); break;
- case PT_INTERP: return("PT_INTERP"); break;
- case PT_NOTE: return("PT_NOTE"); break;
- case PT_SHLIB: return("PT_SHLIB"); break;
- case PT_PHDR: return("PT_PHDR"); break;
- case PT_LOPROC: return("PT_LOPROC/REGINFO"); break;
- case PT_HIPROC: return("PT_HIPROC"); break;
- default: return("PT_BOGUS"); break;
+#ifdef DEBUG
+ switch (p_type) {
+ case PT_NULL:
+ return "PT_NULL";
+ break;
+
+ case PT_LOAD:
+ return "PT_LOAD";
+ break;
+
+ case PT_DYNAMIC:
+ return "PT_DYNAMIC";
+ break;
+
+ case PT_INTERP:
+ return "PT_INTERP";
+ break;
+
+ case PT_NOTE:
+ return "PT_NOTE";
+ break;
+
+ case PT_SHLIB:
+ return "PT_SHLIB";
+ break;
+
+ case PT_PHDR:
+ return "PT_PHDR";
+ break;
+
+ case PT_LOPROC:
+ return "PT_LOPROC/REGINFO";
+ break;
+
+ case PT_HIPROC:
+ return "PT_HIPROC";
+ break;
+
+ default:
+ return "PT_BOGUS";
+ break;
}
+#endif
}
static void print_elfhdr(struct elfhdr *ehp)
{
int i;
- printk("ELFHDR: e_ident<");
- for(i = 0; i < (EI_NIDENT - 1); i++) printk("%x ", ehp->e_ident[i]);
- printk("%x>\n", ehp->e_ident[i]);
- printk(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n",
- (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine,
- (unsigned long) ehp->e_version);
- printk(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] "
- "e_flags[%08lx]\n",
- (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff,
- (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags);
- printk(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n",
- (unsigned short) ehp->e_ehsize, (unsigned short) ehp->e_phentsize,
- (unsigned short) ehp->e_phnum);
- printk(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n",
- (unsigned short) ehp->e_shentsize, (unsigned short) ehp->e_shnum,
- (unsigned short) ehp->e_shstrndx);
+ pr_debug("ELFHDR: e_ident<");
+ for (i = 0; i < (EI_NIDENT - 1); i++)
+ pr_debug("%x ", ehp->e_ident[i]);
+ pr_debug("%x>\n", ehp->e_ident[i]);
+ pr_debug(" e_type[%04x] e_machine[%04x] e_version[%08lx]\n",
+ (unsigned short) ehp->e_type, (unsigned short) ehp->e_machine,
+ (unsigned long) ehp->e_version);
+ pr_debug(" e_entry[%08lx] e_phoff[%08lx] e_shoff[%08lx] "
+ "e_flags[%08lx]\n",
+ (unsigned long) ehp->e_entry, (unsigned long) ehp->e_phoff,
+ (unsigned long) ehp->e_shoff, (unsigned long) ehp->e_flags);
+ pr_debug(" e_ehsize[%04x] e_phentsize[%04x] e_phnum[%04x]\n",
+ (unsigned short) ehp->e_ehsize,
+ (unsigned short) ehp->e_phentsize,
+ (unsigned short) ehp->e_phnum);
+ pr_debug(" e_shentsize[%04x] e_shnum[%04x] e_shstrndx[%04x]\n",
+ (unsigned short) ehp->e_shentsize,
+ (unsigned short) ehp->e_shnum,
+ (unsigned short) ehp->e_shstrndx);
}
static void print_phdr(int i, struct elf_phdr *ep)
{
- printk("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] "
- "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type),
- (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr,
- (unsigned long) ep->p_paddr);
- printk(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] "
- "p_align[%08lx]\n", (unsigned long) ep->p_filesz,
- (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags,
- (unsigned long) ep->p_align);
+ pr_debug("PHDR[%d]: p_type[%s] p_offset[%08lx] p_vaddr[%08lx] "
+ "p_paddr[%08lx]\n", i, get_elf_p_type(ep->p_type),
+ (unsigned long) ep->p_offset, (unsigned long) ep->p_vaddr,
+ (unsigned long) ep->p_paddr);
+ pr_debug(" p_filesz[%08lx] p_memsz[%08lx] p_flags[%08lx] "
+ "p_align[%08lx]\n", (unsigned long) ep->p_filesz,
+ (unsigned long) ep->p_memsz, (unsigned long) ep->p_flags,
+ (unsigned long) ep->p_align);
}
static void dump_phdrs(struct elf_phdr *ep, int pnum)
{
int i;
- for(i = 0; i < pnum; i++, ep++) {
- if((ep->p_type == PT_LOAD) ||
- (ep->p_type == PT_INTERP) ||
- (ep->p_type == PT_PHDR))
+ for (i = 0; i < pnum; i++, ep++) {
+ if ((ep->p_type == PT_LOAD) ||
+ (ep->p_type == PT_INTERP) ||
+ (ep->p_type == PT_PHDR))
print_phdr(i, ep);
}
}
-#endif /* DEBUG */
static void set_brk(unsigned long start, unsigned long end)
{
elf_addr_t *envp;
elf_addr_t *sp, *csp;
-#ifdef DEBUG
- printk("create_irix_tables: p[%p] argc[%d] envc[%d] "
- "load_addr[%08x] interp_load_addr[%08x]\n",
- p, argc, envc, load_addr, interp_load_addr);
-#endif
+ pr_debug("create_irix_tables: p[%p] argc[%d] envc[%d] "
+ "load_addr[%08x] interp_load_addr[%08x]\n",
+ p, argc, envc, load_addr, interp_load_addr);
+
sp = (elf_addr_t *) (~15UL & (unsigned long) p);
csp = sp;
csp -= exec ? DLINFO_ITEMS*2 : 2;
sp -= 2;
NEW_AUX_ENT(0, AT_NULL, 0);
- if(exec) {
+ if (exec) {
sp -= 11*2;
NEW_AUX_ENT (0, AT_PHDR, load_addr + exec->e_phoff);
last_bss = 0;
error = load_addr = 0;
-#ifdef DEBUG
print_elfhdr(interp_elf_ex);
-#endif
/* First of all, some simple consistency checks */
if ((interp_elf_ex->e_type != ET_EXEC &&
}
/* Now read in all of the header information */
- if(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) {
+ if (sizeof(struct elf_phdr) * interp_elf_ex->e_phnum > PAGE_SIZE) {
printk("IRIX interp header bigger than a page (%d)\n",
(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum));
return 0xffffffff;
elf_phdata = kmalloc(sizeof(struct elf_phdr) * interp_elf_ex->e_phnum,
GFP_KERNEL);
- if(!elf_phdata) {
- printk("Cannot kmalloc phdata for IRIX interp.\n");
- return 0xffffffff;
+ if (!elf_phdata) {
+ printk("Cannot kmalloc phdata for IRIX interp.\n");
+ return 0xffffffff;
}
/* If the size of this structure has changed, then punt, since
* we will be doing the wrong thing.
*/
- if(interp_elf_ex->e_phentsize != 32) {
+ if (interp_elf_ex->e_phentsize != 32) {
printk("IRIX interp e_phentsize == %d != 32 ",
interp_elf_ex->e_phentsize);
kfree(elf_phdata);
(char *) elf_phdata,
sizeof(struct elf_phdr) * interp_elf_ex->e_phnum);
-#ifdef DEBUG
dump_phdrs(elf_phdata, interp_elf_ex->e_phnum);
-#endif
eppnt = elf_phdata;
- for(i=0; i<interp_elf_ex->e_phnum; i++, eppnt++) {
- if(eppnt->p_type == PT_LOAD) {
- int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
- int elf_prot = 0;
- unsigned long vaddr = 0;
- if (eppnt->p_flags & PF_R) elf_prot = PROT_READ;
- if (eppnt->p_flags & PF_W) elf_prot |= PROT_WRITE;
- if (eppnt->p_flags & PF_X) elf_prot |= PROT_EXEC;
- elf_type |= MAP_FIXED;
- vaddr = eppnt->p_vaddr;
-
- pr_debug("INTERP do_mmap(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
- interpreter, vaddr,
- (unsigned long) (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
- (unsigned long) elf_prot, (unsigned long) elf_type,
- (unsigned long) (eppnt->p_offset & 0xfffff000));
- down_write(¤t->mm->mmap_sem);
- error = do_mmap(interpreter, vaddr,
- eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
- elf_prot, elf_type,
- eppnt->p_offset & 0xfffff000);
- up_write(¤t->mm->mmap_sem);
-
- if(error < 0 && error > -1024) {
- printk("Aieee IRIX interp mmap error=%d\n", error);
- break; /* Real error */
- }
- pr_debug("error=%08lx ", (unsigned long) error);
- if(!load_addr && interp_elf_ex->e_type == ET_DYN) {
- load_addr = error;
- pr_debug("load_addr = error ");
- }
-
- /* Find the end of the file mapping for this phdr, and keep
- * track of the largest address we see for this.
- */
- k = eppnt->p_vaddr + eppnt->p_filesz;
- if(k > elf_bss) elf_bss = k;
-
- /* Do the same thing for the memory mapping - between
- * elf_bss and last_bss is the bss section.
- */
- k = eppnt->p_memsz + eppnt->p_vaddr;
- if(k > last_bss) last_bss = k;
- pr_debug("\n");
- }
+ for (i = 0; i < interp_elf_ex->e_phnum; i++, eppnt++) {
+ if (eppnt->p_type == PT_LOAD) {
+ int elf_type = MAP_PRIVATE | MAP_DENYWRITE;
+ int elf_prot = 0;
+ unsigned long vaddr = 0;
+ if (eppnt->p_flags & PF_R)
+ elf_prot = PROT_READ;
+ if (eppnt->p_flags & PF_W)
+ elf_prot |= PROT_WRITE;
+ if (eppnt->p_flags & PF_X)
+ elf_prot |= PROT_EXEC;
+ elf_type |= MAP_FIXED;
+ vaddr = eppnt->p_vaddr;
+
+ pr_debug("INTERP do_mmap"
+ "(%p, %08lx, %08lx, %08lx, %08lx, %08lx) ",
+ interpreter, vaddr,
+ (unsigned long)
+ (eppnt->p_filesz + (eppnt->p_vaddr & 0xfff)),
+ (unsigned long)
+ elf_prot, (unsigned long) elf_type,
+ (unsigned long)
+ (eppnt->p_offset & 0xfffff000));
+
+ down_write(¤t->mm->mmap_sem);
+ error = do_mmap(interpreter, vaddr,
+ eppnt->p_filesz + (eppnt->p_vaddr & 0xfff),
+ elf_prot, elf_type,
+ eppnt->p_offset & 0xfffff000);
+ up_write(¤t->mm->mmap_sem);
+
+ if (error < 0 && error > -1024) {
+ printk("Aieee IRIX interp mmap error=%d\n",
+ error);
+ break; /* Real error */
+ }
+ pr_debug("error=%08lx ", (unsigned long) error);
+ if (!load_addr && interp_elf_ex->e_type == ET_DYN) {
+ load_addr = error;
+ pr_debug("load_addr = error ");
+ }
+
+ /*
+ * Find the end of the file mapping for this phdr, and
+ * keep track of the largest address we see for this.
+ */
+ k = eppnt->p_vaddr + eppnt->p_filesz;
+ if (k > elf_bss)
+ elf_bss = k;
+
+ /* Do the same thing for the memory mapping - between
+ * elf_bss and last_bss is the bss section.
+ */
+ k = eppnt->p_memsz + eppnt->p_vaddr;
+ if (k > last_bss)
+ last_bss = k;
+ pr_debug("\n");
+ }
}
/* Now use mmap to map the library into memory. */
- if(error < 0 && error > -1024) {
+ if (error < 0 && error > -1024) {
pr_debug("got error %d\n", error);
kfree(elf_phdata);
return 0xffffffff;
return -ENOEXEC;
/* First of all, some simple consistency checks */
- if((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
+ if ((ehp->e_type != ET_EXEC && ehp->e_type != ET_DYN) ||
!bprm->file->f_op->mmap) {
return -ENOEXEC;
}
* XXX all registers as 64bits on cpu's capable of this at
* XXX exception time plus frob the XTLB exception vector.
*/
- if((ehp->e_flags & EF_MIPS_ABI2))
+ if ((ehp->e_flags & EF_MIPS_ABI2))
return -ENOEXEC;
return 0;
struct file *file = NULL;
*name = NULL;
- for(i = 0; i < pnum; i++, epp++) {
+ for (i = 0; i < pnum; i++, epp++) {
if (epp->p_type != PT_INTERP)
continue;
unsigned int tmp;
int i, prot;
- for(i = 0; i < pnum; i++, epp++) {
- if(epp->p_type != PT_LOAD)
+ for (i = 0; i < pnum; i++, epp++) {
+ if (epp->p_type != PT_LOAD)
continue;
/* Map it. */
up_write(¤t->mm->mmap_sem);
/* Fixup location tracking vars. */
- if((epp->p_vaddr & 0xfffff000) < *estack)
+ if ((epp->p_vaddr & 0xfffff000) < *estack)
*estack = (epp->p_vaddr & 0xfffff000);
- if(!*laddr)
+ if (!*laddr)
*laddr = epp->p_vaddr - epp->p_offset;
- if(epp->p_vaddr < *scode)
+ if (epp->p_vaddr < *scode)
*scode = epp->p_vaddr;
tmp = epp->p_vaddr + epp->p_filesz;
- if(tmp > *ebss)
+ if (tmp > *ebss)
*ebss = tmp;
- if((epp->p_flags & PF_X) && *ecode < tmp)
+ if ((epp->p_flags & PF_X) && *ecode < tmp)
*ecode = tmp;
- if(*edata < tmp)
+ if (*edata < tmp)
*edata = tmp;
tmp = epp->p_vaddr + epp->p_memsz;
- if(tmp > *ebrk)
+ if (tmp > *ebrk)
*ebrk = tmp;
}
int i;
*eentry = 0xffffffff;
- for(i = 0; i < pnum; i++, epp++) {
- if(epp->p_type != PT_INTERP)
+ for (i = 0; i < pnum; i++, epp++) {
+ if (epp->p_type != PT_INTERP)
continue;
/* We should have fielded this error elsewhere... */
- if(*eentry != 0xffffffff)
+ if (*eentry != 0xffffffff)
return -1;
set_fs(old_fs);
if (elf_ex.e_shnum > 20)
goto out;
-#ifdef DEBUG
print_elfhdr(&elf_ex);
-#endif
/* Now read in all of the header information */
size = elf_ex.e_phentsize * elf_ex.e_phnum;
if (retval < 0)
goto out_free_ph;
-#ifdef DEBUG
dump_phdrs(elf_phdata, elf_ex.e_phnum);
-#endif
/* Set some things for later. */
- for(i = 0; i < elf_ex.e_phnum; i++) {
- switch(elf_phdata[i].p_type) {
+ for (i = 0; i < elf_ex.e_phnum; i++) {
+ switch (elf_phdata[i].p_type) {
case PT_INTERP:
has_interp = 1;
elf_ihdr = &elf_phdata[i];
if (elf_interpreter) {
retval = verify_irix_interpreter(&interp_elf_ex);
- if(retval)
+ if (retval)
goto out_free_interp;
}
&load_addr, &start_code, &elf_bss, &end_code,
&end_data, &elf_brk);
- if(elf_interpreter) {
+ if (elf_interpreter) {
retval = map_interpreter(elf_phdata, &interp_elf_ex,
interpreter, &interp_load_addr,
elf_ex.e_phnum, old_fs, &elf_entry);
kfree(elf_interpreter);
- if(retval) {
+ if (retval) {
set_fs(old_fs);
printk("Unable to load IRIX ELF interpreter\n");
send_sig(SIGSEGV, current, 0);
return -ENOEXEC;
/* First of all, some simple consistency checks. */
- if(elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
+ if (elf_ex.e_type != ET_EXEC || elf_ex.e_phnum > 2 ||
!file->f_op->mmap)
return -ENOEXEC;
/* Now read in all of the header information. */
- if(sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE)
+ if (sizeof(struct elf_phdr) * elf_ex.e_phnum > PAGE_SIZE)
return -ENOEXEC;
elf_phdata = kmalloc(sizeof(struct elf_phdr) * elf_ex.e_phnum, GFP_KERNEL);
sizeof(struct elf_phdr) * elf_ex.e_phnum);
j = 0;
- for(i=0; i<elf_ex.e_phnum; i++)
- if((elf_phdata + i)->p_type == PT_LOAD) j++;
+ for (i=0; i<elf_ex.e_phnum; i++)
+ if ((elf_phdata + i)->p_type == PT_LOAD) j++;
- if(j != 1) {
+ if (j != 1) {
kfree(elf_phdata);
return -ENOEXEC;
}
- while(elf_phdata->p_type != PT_LOAD) elf_phdata++;
+ while (elf_phdata->p_type != PT_LOAD) elf_phdata++;
/* Now use mmap to map the library into memory. */
down_write(¤t->mm->mmap_sem);
return -EFAULT;
}
-#ifdef DEBUG
dump_phdrs(user_phdrp, cnt);
-#endif
for (i = 0; i < cnt; i++, hp++) {
if (__get_user(type, &hp->p_type))
filp = fget(fd);
if (!filp)
return -EACCES;
- if(!filp->f_op) {
+ if (!filp->f_op) {
printk("irix_mapelf: Bogon filp!\n");
fput(filp);
return -EACCES;
}
hp = user_phdrp;
- for(i = 0; i < cnt; i++, hp++) {
+ for (i = 0; i < cnt; i++, hp++) {
int prot;
retval = __get_user(vaddr, &hp->p_vaddr);
return sz;
}
-/* #define DEBUG */
-
#define DUMP_WRITE(addr, nr) \
if (!dump_write(file, (addr), (nr))) \
goto end_coredump;
segs++;
}
-#ifdef DEBUG
- printk("irix_core_dump: %d segs taking %d bytes\n", segs, size);
-#endif
+ pr_debug("irix_core_dump: %d segs taking %d bytes\n", segs, size);
/* Set up header. */
memcpy(elf.e_ident, ELFMAG, SELFMAG);
struct elf_phdr phdr;
int sz = 0;
- for(i = 0; i < numnote; i++)
+ for (i = 0; i < numnote; i++)
sz += notesize(¬es[i]);
phdr.p_type = PT_NOTE;
dataoff = offset = roundup(offset, PAGE_SIZE);
/* Write program headers for segments dump. */
- for(vma = current->mm->mmap, i = 0;
+ for (vma = current->mm->mmap, i = 0;
i < segs && vma != NULL; vma = vma->vm_next) {
struct elf_phdr phdr;
size_t sz;
DUMP_WRITE(&phdr, sizeof(phdr));
}
- for(i = 0; i < numnote; i++)
+ for (i = 0; i < numnote; i++)
if (!writenote(¬es[i], file))
goto end_coredump;
DUMP_SEEK(dataoff);
- for(i = 0, vma = current->mm->mmap;
+ for (i = 0, vma = current->mm->mmap;
i < segs && vma != NULL;
vma = vma->vm_next) {
unsigned long addr = vma->vm_start;
if (!maydump(vma))
continue;
i++;
-#ifdef DEBUG
- printk("elf_core_dump: writing %08lx %lx\n", addr, len);
-#endif
+ pr_debug("elf_core_dump: writing %08lx %lx\n", addr, len);
DUMP_WRITE((void __user *)addr, len);
}
}
struct irq_chip msc_levelirq_type = {
- .typename = "SOC-it-Level",
+ .name = "SOC-it-Level",
.ack = level_mask_and_ack_msc_irq,
.mask = mask_msc_irq,
.mask_ack = level_mask_and_ack_msc_irq,
};
struct irq_chip msc_edgeirq_type = {
- .typename = "SOC-it-Edge",
+ .name = "SOC-it-Edge",
.ack = edge_mask_and_ack_msc_irq,
.mask = mask_msc_irq,
.mask_ack = edge_mask_and_ack_msc_irq,
static inline int ls1bit32(unsigned int x)
{
- int b = 31, s;
+ int b = 31, s;
- s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
- s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s;
- s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s;
- s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s;
- s = 1; if (x << 1 == 0) s = 0; b -= s;
+ s = 16; if (x << 16 == 0) s = 0; b -= s; x <<= s;
+ s = 8; if (x << 8 == 0) s = 0; b -= s; x <<= s;
+ s = 4; if (x << 4 == 0) s = 0; b -= s; x <<= s;
+ s = 2; if (x << 2 == 0) s = 0; b -= s; x <<= s;
+ s = 1; if (x << 1 == 0) s = 0; b -= s;
return b;
}
}
struct irq_chip mv64340_irq_type = {
- .typename = "MV-64340",
+ .name = "MV-64340",
.ack = mask_mv64340_irq,
.mask = mask_mv64340_irq,
.mask_ack = mask_mv64340_irq,
#include <asm/mipsregs.h>
#include <asm/system.h>
-static int irq_base;
-
static inline void unmask_rm7k_irq(unsigned int irq)
{
- set_c0_intcontrol(0x100 << (irq - irq_base));
+ set_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE));
}
static inline void mask_rm7k_irq(unsigned int irq)
{
- clear_c0_intcontrol(0x100 << (irq - irq_base));
+ clear_c0_intcontrol(0x100 << (irq - RM7K_CPU_IRQ_BASE));
}
static struct irq_chip rm7k_irq_controller = {
- .typename = "RM7000",
+ .name = "RM7000",
.ack = mask_rm7k_irq,
.mask = mask_rm7k_irq,
.mask_ack = mask_rm7k_irq,
.unmask = unmask_rm7k_irq,
};
-void __init rm7k_cpu_irq_init(int base)
+void __init rm7k_cpu_irq_init(void)
{
+ int base = RM7K_CPU_IRQ_BASE;
int i;
clear_c0_intcontrol(0x00000f00); /* Mask all */
for (i = base; i < base + 4; i++)
set_irq_chip_and_handler(i, &rm7k_irq_controller,
handle_level_irq);
-
- irq_base = base;
}
#include <asm/mipsregs.h>
#include <asm/system.h>
-static int irq_base;
-
static inline void unmask_rm9k_irq(unsigned int irq)
{
- set_c0_intcontrol(0x1000 << (irq - irq_base));
+ set_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE));
}
static inline void mask_rm9k_irq(unsigned int irq)
{
- clear_c0_intcontrol(0x1000 << (irq - irq_base));
+ clear_c0_intcontrol(0x1000 << (irq - RM9K_CPU_IRQ_BASE));
}
static inline void rm9k_cpu_irq_enable(unsigned int irq)
local_irq_restore(flags);
}
-static void rm9k_cpu_irq_disable(unsigned int irq)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- mask_rm9k_irq(irq);
- local_irq_restore(flags);
-}
-
/*
* Performance counter interrupts are global on all processors.
*/
}
static struct irq_chip rm9k_irq_controller = {
- .typename = "RM9000",
+ .name = "RM9000",
.ack = mask_rm9k_irq,
.mask = mask_rm9k_irq,
.mask_ack = mask_rm9k_irq,
};
static struct irq_chip rm9k_perfcounter_irq = {
- .typename = "RM9000",
+ .name = "RM9000",
.startup = rm9k_perfcounter_irq_startup,
.shutdown = rm9k_perfcounter_irq_shutdown,
.ack = mask_rm9k_irq,
EXPORT_SYMBOL(rm9000_perfcount_irq);
-void __init rm9k_cpu_irq_init(int base)
+void __init rm9k_cpu_irq_init(void)
{
+ int base = RM9K_CPU_IRQ_BASE;
int i;
clear_c0_intcontrol(0x0000f000); /* Mask all */
rm9000_perfcount_irq = base + 1;
set_irq_chip_and_handler(rm9000_perfcount_irq, &rm9k_perfcounter_irq,
handle_level_irq);
-
- irq_base = base;
}
* Don't even think about using this on SMP. You have been warned.
*
* This file exports one global function:
- * void mips_cpu_irq_init(int irq_base);
+ * void mips_cpu_irq_init(void);
*/
#include <linux/init.h>
#include <linux/interrupt.h>
#include <asm/mipsmtregs.h>
#include <asm/system.h>
-static int mips_cpu_irq_base;
-
static inline void unmask_mips_irq(unsigned int irq)
{
- set_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ set_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE));
irq_enable_hazard();
}
static inline void mask_mips_irq(unsigned int irq)
{
- clear_c0_status(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_status(0x100 << (irq - MIPS_CPU_IRQ_BASE));
irq_disable_hazard();
}
static struct irq_chip mips_cpu_irq_controller = {
- .typename = "MIPS",
+ .name = "MIPS",
.ack = mask_mips_irq,
.mask = mask_mips_irq,
.mask_ack = mask_mips_irq,
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
unmask_mips_mt_irq(irq);
static void mips_mt_cpu_irq_ack(unsigned int irq)
{
unsigned int vpflags = dvpe();
- clear_c0_cause(0x100 << (irq - mips_cpu_irq_base));
+ clear_c0_cause(0x100 << (irq - MIPS_CPU_IRQ_BASE));
evpe(vpflags);
mask_mips_mt_irq(irq);
}
static struct irq_chip mips_mt_cpu_irq_controller = {
- .typename = "MIPS",
+ .name = "MIPS",
.startup = mips_mt_cpu_irq_startup,
.ack = mips_mt_cpu_irq_ack,
.mask = mask_mips_mt_irq,
.eoi = unmask_mips_mt_irq,
};
-void __init mips_cpu_irq_init(int irq_base)
+void __init mips_cpu_irq_init(void)
{
+ int irq_base = MIPS_CPU_IRQ_BASE;
int i;
/* Mask interrupts. */
for (i = irq_base + 2; i < irq_base + 8; i++)
set_irq_chip_and_handler(i, &mips_cpu_irq_controller,
handle_level_irq);
-
- mips_cpu_irq_base = irq_base;
}
}
struct sysinfo32 {
- s32 uptime;
- u32 loads[3];
- u32 totalram;
- u32 freeram;
- u32 sharedram;
- u32 bufferram;
- u32 totalswap;
- u32 freeswap;
- u16 procs;
+ s32 uptime;
+ u32 loads[3];
+ u32 totalram;
+ u32 freeram;
+ u32 sharedram;
+ u32 bufferram;
+ u32 totalswap;
+ u32 freeswap;
+ u16 procs;
u32 totalhigh;
u32 freehigh;
u32 mem_unit;
asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32)
{
int err;
- struct ustat tmp;
+ struct ustat tmp;
struct ustat32 tmp32;
mm_segment_t old_fs = get_fs();
if (err)
goto out;
- memset(&tmp32,0,sizeof(struct ustat32));
- tmp32.f_tfree = tmp.f_tfree;
- tmp32.f_tinode = tmp.f_tinode;
+ memset(&tmp32,0,sizeof(struct ustat32));
+ tmp32.f_tfree = tmp.f_tfree;
+ tmp32.f_tinode = tmp.f_tinode;
- err = copy_to_user(ubuf32,&tmp32,sizeof(struct ustat32)) ? -EFAULT : 0;
+ err = copy_to_user(ubuf32,&tmp32,sizeof(struct ustat32)) ? -EFAULT : 0;
out:
return err;
goto out_unlock;
}
+ retval = security_task_setscheduler(p, 0, NULL);
+ if (retval)
+ goto out_unlock;
+
/* Record new user-specified CPU set for future reference */
p->thread.user_cpus_allowed = new_mask;
p = find_process_by_pid(pid);
if (!p)
goto out_unlock;
-
- retval = 0;
+ retval = security_task_getscheduler(p);
+ if (retval)
+ goto out_unlock;
cpus_and(mask, p->thread.user_cpus_allowed, cpu_possible_map);
[CPU_R4000PC] = "R4000PC",
[CPU_R4000SC] = "R4000SC",
[CPU_R4000MC] = "R4000MC",
- [CPU_R4200] = "R4200",
+ [CPU_R4200] = "R4200",
[CPU_R4400PC] = "R4400PC",
[CPU_R4400SC] = "R4400SC",
[CPU_R4400MC] = "R4400MC",
[CPU_R4600] = "R4600",
[CPU_R6000] = "R6000",
- [CPU_R6000A] = "R6000A",
+ [CPU_R6000A] = "R6000A",
[CPU_R8000] = "R8000",
[CPU_R10000] = "R10000",
[CPU_R12000] = "R12000",
[CPU_R4650] = "R4650",
[CPU_R4700] = "R4700",
[CPU_R5000] = "R5000",
- [CPU_R5000A] = "R5000A",
+ [CPU_R5000A] = "R5000A",
[CPU_R4640] = "R4640",
[CPU_NEVADA] = "Nevada",
[CPU_RM7000] = "RM7000",
[CPU_RM9000] = "RM9000",
[CPU_R5432] = "R5432",
[CPU_4KC] = "MIPS 4Kc",
- [CPU_5KC] = "MIPS 5Kc",
+ [CPU_5KC] = "MIPS 5Kc",
[CPU_R4310] = "R4310",
[CPU_SB1] = "SiByte SB1",
[CPU_SB1A] = "SiByte SB1A",
#include <asm/isadep.h>
#include <asm/inst.h>
#include <asm/stacktrace.h>
-#ifdef CONFIG_MIPS_MT_SMTC
-#include <asm/mipsmtregs.h>
-extern void smtc_idle_loop_hook(void);
-#endif /* CONFIG_MIPS_MT_SMTC */
/*
* The idle thread. There's no useful work to be done, so just try to conserve
while (1) {
while (!need_resched()) {
#ifdef CONFIG_MIPS_MT_SMTC
+ extern void smtc_idle_loop_hook(void);
+
smtc_idle_loop_hook();
#endif /* CONFIG_MIPS_MT_SMTC */
if (cpu_wait)
*/
LEAF(_restore_fp_context)
EX lw t0, SC_FPC_CSR(a0)
+
+ /* Fail if the CSR has exceptions pending */
+ srl t1, t0, 5
+ and t1, t0
+ andi t1, 0x1f << 7
+ bnez t1, fault
+ nop
+
#ifdef CONFIG_64BIT
EX ldc1 $f1, SC_FPREGS+8(a0)
EX ldc1 $f3, SC_FPREGS+24(a0)
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
EX lw t0, SC32_FPC_CSR(a0)
+
+ /* Fail if the CSR has exceptions pending */
+ srl t1, t0, 5
+ and t1, t0
+ andi t1, 0x1f << 7
+ bnez t1, fault
+ nop
+
EX ldc1 $f0, SC32_FPREGS+0(a0)
EX ldc1 $f2, SC32_FPREGS+16(a0)
EX ldc1 $f4, SC32_FPREGS+32(a0)
jr ra
li v0, 0 # success
END(_restore_fp_context32)
- .set reorder
#endif
+ .set reorder
+
.type fault@function
.ent fault
fault: li v0, -EFAULT # failure
static void rtlx_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ);
}
.name = "RTLX",
};
-static int rtlx_irq_num = MIPSCPU_INT_BASE + MIPS_CPU_RTLX_IRQ;
+static int rtlx_irq_num = MIPS_CPU_IRQ_BASE + MIPS_CPU_RTLX_IRQ;
static char register_chrdev_failed[] __initdata =
KERN_ERR "rtlx_module_init: unable to register device\n";
PTR sys_readlinkat
PTR sys_fchmodat
PTR sys_faccessat
- PTR sys_pselect6
+ PTR compat_sys_pselect6
PTR sys_ppoll /* 6265 */
PTR sys_unshare
PTR sys_splice
PTR sys_readlinkat
PTR sys_fchmodat
PTR sys_faccessat /* 4300 */
- PTR sys_pselect6
+ PTR compat_sys_pselect6
PTR sys_ppoll
PTR sys_unshare
PTR sys_splice
static void __init bootmem_init(void)
{
unsigned long reserved_end;
- unsigned long highest = 0;
- unsigned long mapstart = -1UL;
+ unsigned long mapstart = ~0UL;
unsigned long bootmap_size;
int i;
*/
reserved_end = max(init_initrd(), PFN_UP(__pa_symbol(&_end)));
+ /*
+ * max_low_pfn is not a number of pages. The number of pages
+ * of the system is given by 'max_low_pfn - min_low_pfn'.
+ */
+ min_low_pfn = ~0UL;
+ max_low_pfn = 0;
+
/*
* Find the highest page frame number we have available.
*/
end = PFN_DOWN(boot_mem_map.map[i].addr
+ boot_mem_map.map[i].size);
- if (end > highest)
- highest = end;
+ if (end > max_low_pfn)
+ max_low_pfn = end;
+ if (start < min_low_pfn)
+ min_low_pfn = start;
if (end <= reserved_end)
continue;
if (start >= mapstart)
mapstart = max(reserved_end, start);
}
+ if (min_low_pfn >= max_low_pfn)
+ panic("Incorrect memory mapping !!!");
+ if (min_low_pfn > ARCH_PFN_OFFSET) {
+ printk(KERN_INFO
+ "Wasting %lu bytes for tracking %lu unused pages\n",
+ (min_low_pfn - ARCH_PFN_OFFSET) * sizeof(struct page),
+ min_low_pfn - ARCH_PFN_OFFSET);
+ } else if (min_low_pfn < ARCH_PFN_OFFSET) {
+ printk(KERN_INFO
+ "%lu free pages won't be used\n",
+ ARCH_PFN_OFFSET - min_low_pfn);
+ }
+ min_low_pfn = ARCH_PFN_OFFSET;
+
/*
* Determine low and high memory ranges
*/
- if (highest > PFN_DOWN(HIGHMEM_START)) {
+ if (max_low_pfn > PFN_DOWN(HIGHMEM_START)) {
#ifdef CONFIG_HIGHMEM
highstart_pfn = PFN_DOWN(HIGHMEM_START);
- highend_pfn = highest;
+ highend_pfn = max_low_pfn;
#endif
- highest = PFN_DOWN(HIGHMEM_START);
+ max_low_pfn = PFN_DOWN(HIGHMEM_START);
}
/*
* Initialize the boot-time allocator with low memory only.
*/
- bootmap_size = init_bootmem(mapstart, highest);
-
+ bootmap_size = init_bootmem_node(NODE_DATA(0), mapstart,
+ min_low_pfn, max_low_pfn);
/*
* Register fully available low RAM pages with the bootmem allocator.
*/
#if defined(CONFIG_VT)
#if defined(CONFIG_VGA_CONSOLE)
- conswitchp = &vga_con;
+ conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
- conswitchp = &dummy_con;
+ conswitchp = &dummy_con;
#endif
#endif
}
__setup("nodsp", dsp_disable);
+
+unsigned long kernelsp[NR_CPUS];
+unsigned long fw_arg0, fw_arg1, fw_arg2, fw_arg3;
spin_lock_irq(¤t->sighand->siglock);
current->saved_sigmask = current->blocked;
current->blocked = newset;
- recalc_sigpending();
+ recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
if (!ret && oact) {
if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)))
- return -EFAULT;
+ return -EFAULT;
err |= __put_user(old_ka.sa.sa_flags, &oact->sa_flags);
err |= __put_user(old_ka.sa.sa_handler, &oact->sa_handler);
err |= __put_user(old_ka.sa.sa_mask.sig[0], oact->sa_mask.sig);
current->comm, current->pid,
frame, regs->cp0_epc, frame->regs[31]);
#endif
- return 0;
+ return 0;
give_sigsegv:
force_sigsegv(signr, current);
spin_lock_irq(¤t->sighand->siglock);
current->saved_sigmask = current->blocked;
current->blocked = newset;
- recalc_sigpending();
+ recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
current->state = TASK_INTERRUPTIBLE;
/* Create the ucontext. */
err |= __put_user(0, &frame->rs_uc.uc_flags);
err |= __put_user(0, &frame->rs_uc.uc_link);
- sp = (int) (long) current->sas_ss_sp;
+ sp = (int) (long) current->sas_ss_sp;
err |= __put_user(sp,
&frame->rs_uc.uc_stack.ss_sp);
err |= __put_user(sas_ss_flags(regs->regs[29]),
#include <asm/mipsregs.h>
#include <asm/mipsmtregs.h>
#include <asm/mips_mt.h>
-#include <asm/mips-boards/maltaint.h> /* This is f*cking wrong */
#define MIPS_CPU_IPI_RESCHED_IRQ 0
#define MIPS_CPU_IPI_CALL_IRQ 1
static void ipi_resched_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ);
}
static void ipi_call_dispatch(void)
{
- do_IRQ(MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ);
+ do_IRQ(MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ);
}
static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id)
set_vi_handler(MIPS_CPU_IPI_CALL_IRQ, ipi_call_dispatch);
}
- cpu_ipi_resched_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
- cpu_ipi_call_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_CALL_IRQ;
+ cpu_ipi_resched_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_RESCHED_IRQ;
+ cpu_ipi_call_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_CALL_IRQ;
setup_irq(cpu_ipi_resched_irq, &irq_resched);
setup_irq(cpu_ipi_call_irq, &irq_call);
* This file should be built into the kernel only if CONFIG_MIPS_MT_SMTC is set.
*/
-/*
- * MIPSCPU_INT_BASE is identically defined in both
- * asm-mips/mips-boards/maltaint.h and asm-mips/mips-boards/simint.h,
- * but as yet there's no properly organized include structure that
- * will ensure that the right *int.h file will be included for a
- * given platform build.
- */
-
-#define MIPSCPU_INT_BASE 16
-
#define MIPS_CPU_IPI_IRQ 1
#define LOCK_MT_PRA() \
#define IPIBUF_PER_CPU 4
-struct smtc_ipi_q IPIQ[NR_CPUS];
-struct smtc_ipi_q freeIPIq;
+static struct smtc_ipi_q IPIQ[NR_CPUS];
+static struct smtc_ipi_q freeIPIq;
/* Forward declarations */
void ipi_decode(struct smtc_ipi *);
-void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
-void setup_cross_vpe_interrupts(void);
+static void post_direct_ipi(int cpu, struct smtc_ipi *pipi);
+static void setup_cross_vpe_interrupts(void);
void init_smtc_stats(void);
/* Global SMTC Status */
* Configure shared TLB - VPC configuration bit must be set by caller
*/
-void smtc_configure_tlb(void)
+static void smtc_configure_tlb(void)
{
int i,tlbsiz,vpes;
unsigned long mvpconf0;
* the VPE.
*/
-void smtc_ipi_qdump(void)
+static void smtc_ipi_qdump(void)
{
int i;
return result;
}
-/* No longer used in IPI dispatch, but retained for future recycling */
-
-static __inline__ int atomic_postclear(unsigned int *pv)
-{
- unsigned long result;
-
- unsigned long temp;
-
- __asm__ __volatile__(
- "1: ll %0, %2 \n"
- " or %1, $0, $0 \n"
- " sc %1, %2 \n"
- " beqz %1, 1b \n"
- " sync \n"
- : "=&r" (result), "=&r" (temp), "=m" (*pv)
- : "m" (*pv)
- : "memory");
-
- return result;
-}
-
-
void smtc_send_ipi(int cpu, int type, unsigned int action)
{
int tcstatus;
/*
* Send IPI message to Halted TC, TargTC/TargVPE already having been set
*/
-void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
+static void post_direct_ipi(int cpu, struct smtc_ipi *pipi)
{
struct pt_regs *kstack;
unsigned long tcstatus;
* interrupts.
*/
-static int cpu_ipi_irq = MIPSCPU_INT_BASE + MIPS_CPU_IPI_IRQ;
+static int cpu_ipi_irq = MIPS_CPU_IRQ_BASE + MIPS_CPU_IPI_IRQ;
static irqreturn_t ipi_interrupt(int irq, void *dev_idm)
{
static struct irqaction irq_ipi;
-void setup_cross_vpe_interrupts(void)
+static void setup_cross_vpe_interrupts(void)
{
if (!cpu_has_vint)
panic("SMTC Kernel requires Vectored Interupt support");
* It would be nice to be able to use a spinlock here,
* but this is invoked from within TLB flush routines
* that protect themselves with DVPE, so if a lock is
- * held by another TC, it'll never be freed.
+ * held by another TC, it'll never be freed.
*
* DVPE/DMT must not be done with interrupts enabled,
* so even so most callers will already have disabled
* Support for single-threading cache flush operations.
*/
-int halt_state_save[NR_CPUS];
+static int halt_state_save[NR_CPUS];
/*
* To really, really be sure that nothing is being done
struct irix_statfs {
short f_type;
- long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree;
+ long f_bsize, f_frsize, f_blocks, f_bfree, f_files, f_ffree;
char f_fname[6], f_fpack[6];
};
fn = default_llseek;
if (file->f_op && file->f_op->llseek)
- fn = file->f_op->llseek;
+ fn = file->f_op->llseek;
lock_kernel();
retval = fn(file, offset, origin);
unlock_kernel();
};
static char *rstrs[] = {
- [R_MIPS_NONE] = "MIPS_NONE",
+ [R_MIPS_NONE] = "MIPS_NONE",
[R_MIPS_32] = "MIPS_32",
[R_MIPS_26] = "MIPS_26",
[R_MIPS_HI16] = "MIPS_HI16",
}
/* We are prepared so configure and start the VPE... */
-int vpe_run(struct vpe * v)
+static int vpe_run(struct vpe * v)
{
struct vpe_notifications *n;
unsigned long val, dmt_flag;
dvpe();
if (!list_empty(&v->tc)) {
- if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
- printk(KERN_WARNING "VPE loader: TC %d is already in use.\n",
- t->index);
- return -ENOEXEC;
- }
- } else {
- printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n",
- v->minor);
- return -ENOEXEC;
- }
+ if ((t = list_entry(v->tc.next, struct tc, tc)) == NULL) {
+ printk(KERN_WARNING "VPE loader: TC %d is already in use.\n",
+ t->index);
+ return -ENOEXEC;
+ }
+ } else {
+ printk(KERN_WARNING "VPE loader: No TC's associated with VPE %d\n",
+ v->minor);
+ return -ENOEXEC;
+ }
/* Put MVPE's into 'configuration state' */
set_c0_mvpcontrol(MVPCONTROL_VPC);
back_to_back_c0_hazard();
- /* Set up the XTC bit in vpeconf0 to point at our tc */
- write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
- | (t->index << VPECONF0_XTC_SHIFT));
+ /* Set up the XTC bit in vpeconf0 to point at our tc */
+ write_vpe_c0_vpeconf0( (read_vpe_c0_vpeconf0() & ~(VPECONF0_XTC))
+ | (t->index << VPECONF0_XTC_SHIFT));
back_to_back_c0_hazard();
- /* enable this VPE */
- write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
+ /* enable this VPE */
+ write_vpe_c0_vpeconf0(read_vpe_c0_vpeconf0() | VPECONF0_VPA);
/* clear out any left overs from a previous program */
write_vpe_c0_status(0);
* contents of the program (p)buffer performing relocatations/etc, free's it
* when finished.
*/
-int vpe_elfload(struct vpe * v)
+static int vpe_elfload(struct vpe * v)
{
Elf_Ehdr *hdr;
Elf_Shdr *sechdrs;
}
static struct irq_chip lasat_irq_type = {
- .typename = "Lasat",
+ .name = "Lasat",
.ack = disable_lasat_irq,
.mask = disable_lasat_irq,
.mask_ack = disable_lasat_irq,
add_memory_region(0, lasat_board_info.li_memsize, BOOT_MEM_RAM);
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
const char *get_system_type(void)
# Makefile for MIPS-specific library files..
#
-lib-y += memset.o watch.o
+lib-y += watch.o
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
-#define EX(insn,reg,addr,handler) \
-9: insn reg, addr; \
- .section __ex_table,"a"; \
- PTR 9b, handler; \
- .previous
-
- .macro f_fill64 dst, offset, val, fixup
- EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup)
- .endm
-
-/*
- * memset(void *s, int c, size_t n)
- *
- * a0: start of area to clear
- * a1: char to fill with
- * a2: size of area to clear
- */
- .set noreorder
- .align 5
-LEAF(memset)
- beqz a1, 1f
- move v0, a0 /* result */
-
- andi a1, 0xff /* spread fillword */
- sll t1, a1, 8
- or a1, t1
- sll t1, a1, 16
- or a1, t1
-1:
-
-FEXPORT(__bzero)
- sltiu t0, a2, LONGSIZE /* very small region? */
- bnez t0, small_memset
- andi t0, a0, LONGMASK /* aligned? */
-
- beqz t0, 1f
- PTR_SUBU t0, LONGSIZE /* alignment in bytes */
-
-#ifdef __MIPSEB__
- EX(swl, a1, (a0), first_fixup) /* make word aligned */
-#endif
-#ifdef __MIPSEL__
- EX(swr, a1, (a0), first_fixup) /* make word aligned */
-#endif
- PTR_SUBU a0, t0 /* long align ptr */
- PTR_ADDU a2, t0 /* correct size */
-
-1: ori t1, a2, 0x3f /* # of full blocks */
- xori t1, 0x3f
- beqz t1, memset_partial /* no block to fill */
- andi t0, a2, 0x3c
-
- PTR_ADDU t1, a0 /* end address */
- .set reorder
-1: PTR_ADDIU a0, 64
- f_fill64 a0, -64, a1, fwd_fixup
- bne t1, a0, 1b
- .set noreorder
-
-memset_partial:
- PTR_LA t1, 2f /* where to start */
- PTR_SUBU t1, t0
- jr t1
- PTR_ADDU a0, t0 /* dest ptr */
-
- .set push
- .set noreorder
- .set nomacro
- f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */
-2: .set pop
- andi a2, LONGMASK /* At most one long to go */
-
- beqz a2, 1f
- PTR_ADDU a0, a2 /* What's left */
-#ifdef __MIPSEB__
- EX(swr, a1, -1(a0), last_fixup)
-#endif
-#ifdef __MIPSEL__
- EX(swl, a1, -1(a0), last_fixup)
-#endif
-1: jr ra
- move a2, zero
-
-small_memset:
- beqz a2, 2f
- PTR_ADDU t1, a0, a2
-
-1: PTR_ADDIU a0, 1 /* fill bytewise */
- bne t1, a0, 1b
- sb a1, -1(a0)
-
-2: jr ra /* done */
- move a2, zero
- END(memset)
-
-first_fixup:
- jr ra
- nop
-
-fwd_fixup:
- PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
- andi a2, 0x3f
- LONG_ADDU a2, t1
- jr ra
- LONG_SUBU a2, t0
-
-partial_fixup:
- PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
- andi a2, LONGMASK
- LONG_ADDU a2, t1
- jr ra
- LONG_SUBU a2, t0
-
-last_fixup:
- jr ra
- andi v1, a2, LONGMASK
# Makefile for MIPS-specific library files..
#
-lib-y += memset.o watch.o
+lib-y += watch.o
obj-$(CONFIG_CPU_MIPS32) += dump_tlb.o
obj-$(CONFIG_CPU_MIPS64) += dump_tlb.o
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
- * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
- */
-#include <asm/asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/regdef.h>
-
-#define EX(insn,reg,addr,handler) \
-9: insn reg, addr; \
- .section __ex_table,"a"; \
- PTR 9b, handler; \
- .previous
-
- .macro f_fill64 dst, offset, val, fixup
- EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup)
- EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup)
- .endm
-
-/*
- * memset(void *s, int c, size_t n)
- *
- * a0: start of area to clear
- * a1: char to fill with
- * a2: size of area to clear
- */
- .set noreorder
- .align 5
-LEAF(memset)
- beqz a1, 1f
- move v0, a0 /* result */
-
- andi a1, 0xff /* spread fillword */
- dsll t1, a1, 8
- or a1, t1
- dsll t1, a1, 16
- or a1, t1
- dsll t1, a1, 32
- or a1, t1
-1:
-
-FEXPORT(__bzero)
- sltiu t0, a2, LONGSIZE /* very small region? */
- bnez t0, small_memset
- andi t0, a0, LONGMASK /* aligned? */
-
- beqz t0, 1f
- PTR_SUBU t0, LONGSIZE /* alignment in bytes */
-
-#ifdef __MIPSEB__
- EX(sdl, a1, (a0), first_fixup) /* make dword aligned */
-#endif
-#ifdef __MIPSEL__
- EX(sdr, a1, (a0), first_fixup) /* make dword aligned */
-#endif
- PTR_SUBU a0, t0 /* long align ptr */
- PTR_ADDU a2, t0 /* correct size */
-
-1: ori t1, a2, 0x3f /* # of full blocks */
- xori t1, 0x3f
- beqz t1, memset_partial /* no block to fill */
- andi t0, a2, 0x38
-
- PTR_ADDU t1, a0 /* end address */
- .set reorder
-1: PTR_ADDIU a0, 64
- f_fill64 a0, -64, a1, fwd_fixup
- bne t1, a0, 1b
- .set noreorder
-
-memset_partial:
- PTR_LA t1, 2f /* where to start */
- .set noat
- dsrl AT, t0, 1
- PTR_SUBU t1, AT
- .set noat
- jr t1
- PTR_ADDU a0, t0 /* dest ptr */
-
- .set push
- .set noreorder
- .set nomacro
- f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */
-2: .set pop
- andi a2, LONGMASK /* At most one long to go */
-
- beqz a2, 1f
- PTR_ADDU a0, a2 /* What's left */
-#ifdef __MIPSEB__
- EX(sdr, a1, -1(a0), last_fixup)
-#endif
-#ifdef __MIPSEL__
- EX(sdl, a1, -1(a0), last_fixup)
-#endif
-1: jr ra
- move a2, zero
-
-small_memset:
- beqz a2, 2f
- PTR_ADDU t1, a0, a2
-
-1: PTR_ADDIU a0, 1 /* fill bytewise */
- bne t1, a0, 1b
- sb a1, -1(a0)
-
-2: jr ra /* done */
- move a2, zero
- END(memset)
-
-first_fixup:
- jr ra
- nop
-
-fwd_fixup:
- PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
- andi a2, 0x3f
- LONG_ADDU a2, t1
- jr ra
- LONG_SUBU a2, t0
-
-partial_fixup:
- PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
- andi a2, LONGMASK
- LONG_ADDU a2, t1
- jr ra
- LONG_SUBU a2, t0
-
-last_fixup:
- jr ra
- andi v1, a2, LONGMASK
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memcpy.o promlib.o \
+lib-y += csum_partial.o memcpy.o memset.o promlib.o \
strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1998, 1999, 2000 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ */
+#include <asm/asm.h>
+#include <asm/asm-offsets.h>
+#include <asm/regdef.h>
+
+#if LONGSIZE == 4
+#define LONG_S_L swl
+#define LONG_S_R swr
+#else
+#define LONG_S_L sdl
+#define LONG_S_R sdr
+#endif
+
+#define EX(insn,reg,addr,handler) \
+9: insn reg, addr; \
+ .section __ex_table,"a"; \
+ PTR 9b, handler; \
+ .previous
+
+ .macro f_fill64 dst, offset, val, fixup
+ EX(LONG_S, \val, (\offset + 0 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 1 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 2 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 3 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 4 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 5 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 6 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 7 * LONGSIZE)(\dst), \fixup)
+#if LONGSIZE == 4
+ EX(LONG_S, \val, (\offset + 8 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 9 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 10 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 11 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 12 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 13 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 14 * LONGSIZE)(\dst), \fixup)
+ EX(LONG_S, \val, (\offset + 15 * LONGSIZE)(\dst), \fixup)
+#endif
+ .endm
+
+/*
+ * memset(void *s, int c, size_t n)
+ *
+ * a0: start of area to clear
+ * a1: char to fill with
+ * a2: size of area to clear
+ */
+ .set noreorder
+ .align 5
+LEAF(memset)
+ beqz a1, 1f
+ move v0, a0 /* result */
+
+ andi a1, 0xff /* spread fillword */
+ LONG_SLL t1, a1, 8
+ or a1, t1
+ LONG_SLL t1, a1, 16
+#if LONGSIZE == 8
+ or a1, t1
+ LONG_SLL t1, a1, 32
+#endif
+ or a1, t1
+1:
+
+FEXPORT(__bzero)
+ sltiu t0, a2, LONGSIZE /* very small region? */
+ bnez t0, small_memset
+ andi t0, a0, LONGMASK /* aligned? */
+
+ beqz t0, 1f
+ PTR_SUBU t0, LONGSIZE /* alignment in bytes */
+
+#ifdef __MIPSEB__
+ EX(LONG_S_L, a1, (a0), first_fixup) /* make word/dword aligned */
+#endif
+#ifdef __MIPSEL__
+ EX(LONG_S_R, a1, (a0), first_fixup) /* make word/dword aligned */
+#endif
+ PTR_SUBU a0, t0 /* long align ptr */
+ PTR_ADDU a2, t0 /* correct size */
+
+1: ori t1, a2, 0x3f /* # of full blocks */
+ xori t1, 0x3f
+ beqz t1, memset_partial /* no block to fill */
+ andi t0, a2, 0x40-LONGSIZE
+
+ PTR_ADDU t1, a0 /* end address */
+ .set reorder
+1: PTR_ADDIU a0, 64
+ f_fill64 a0, -64, a1, fwd_fixup
+ bne t1, a0, 1b
+ .set noreorder
+
+memset_partial:
+ PTR_LA t1, 2f /* where to start */
+#if LONGSIZE == 4
+ PTR_SUBU t1, t0
+#else
+ .set noat
+ LONG_SRL AT, t0, 1
+ PTR_SUBU t1, AT
+ .set noat
+#endif
+ jr t1
+ PTR_ADDU a0, t0 /* dest ptr */
+
+ .set push
+ .set noreorder
+ .set nomacro
+ f_fill64 a0, -64, a1, partial_fixup /* ... but first do longs ... */
+2: .set pop
+ andi a2, LONGMASK /* At most one long to go */
+
+ beqz a2, 1f
+ PTR_ADDU a0, a2 /* What's left */
+#ifdef __MIPSEB__
+ EX(LONG_S_R, a1, -1(a0), last_fixup)
+#endif
+#ifdef __MIPSEL__
+ EX(LONG_S_L, a1, -1(a0), last_fixup)
+#endif
+1: jr ra
+ move a2, zero
+
+small_memset:
+ beqz a2, 2f
+ PTR_ADDU t1, a0, a2
+
+1: PTR_ADDIU a0, 1 /* fill bytewise */
+ bne t1, a0, 1b
+ sb a1, -1(a0)
+
+2: jr ra /* done */
+ move a2, zero
+ END(memset)
+
+first_fixup:
+ jr ra
+ nop
+
+fwd_fixup:
+ PTR_L t0, TI_TASK($28)
+ LONG_L t0, THREAD_BUADDR(t0)
+ andi a2, 0x3f
+ LONG_ADDU a2, t1
+ jr ra
+ LONG_SUBU a2, t0
+
+partial_fixup:
+ PTR_L t0, TI_TASK($28)
+ LONG_L t0, THREAD_BUADDR(t0)
+ andi a2, LONGMASK
+ LONG_ADDU a2, t1
+ jr ra
+ LONG_SUBU a2, t0
+
+last_fixup:
+ jr ra
+ andi v1, a2, LONGMASK
if (sp >= (long)CKSEG0 && sp < (long)CKSEG2)
usp = CKSEG1ADDR(sp);
+#ifdef CONFIG_64BIT
else if ((long long)sp >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
(long long)sp < (long long)PHYS_TO_XKPHYS(8LL, 0))
usp = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
XKPHYS_TO_PHYS((long long)sp));
+#endif
else {
BUG();
usp = sp;
}
if (lfunc >= (long)CKSEG0 && lfunc < (long)CKSEG2)
ufunc = CKSEG1ADDR(lfunc);
+#ifdef CONFIG_64BIT
else if ((long long)lfunc >= (long long)PHYS_TO_XKPHYS(0LL, 0) &&
(long long)lfunc < (long long)PHYS_TO_XKPHYS(8LL, 0))
ufunc = PHYS_TO_XKPHYS((long long)K_CALG_UNCACHED,
XKPHYS_TO_PHYS((long long)lfunc));
+#endif
else {
BUG();
ufunc = lfunc;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
#include <asm/gdb-stub.h>
#include <asm/io.h>
}
static struct irq_chip atlas_irq_type = {
- .typename = "Atlas",
+ .name = "Atlas",
.ack = disable_atlas_irq,
.mask = disable_atlas_irq,
.mask_ack = disable_atlas_irq,
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
};
-int __initdata msc_nr_irqs = sizeof(msc_irqmap) / sizeof(*msc_irqmap);
+int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
msc_irqmap_t __initdata msc_eicirqmap[] = {
{MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
};
-int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap) / sizeof(*msc_eicirqmap);
+int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
void __init arch_init_irq(void)
{
init_atlas_irqs(ATLAS_INT_BASE);
if (!cpu_has_veic)
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
}
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- unsigned long freed = 0;
unsigned long addr;
int i;
if (boot_mem_map.map[i].type != BOOT_MEM_ROM_DATA)
continue;
- addr = PAGE_ALIGN(boot_mem_map.map[i].addr);
- while (addr < boot_mem_map.map[i].addr
- + boot_mem_map.map[i].size) {
- ClearPageReserved(virt_to_page(__va(addr)));
- init_page_count(virt_to_page(__va(addr)));
- free_page((unsigned long)__va(addr));
- addr += PAGE_SIZE;
- freed += PAGE_SIZE;
- }
+ addr = boot_mem_map.map[i].addr;
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
}
- printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
-
- return freed;
}
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
+#include <linux/kernel.h>
#include <linux/random.h>
#include <asm/i8259.h>
{MSC01C_INT_TMR, MSC01_IRQ_EDGE, 0},
{MSC01C_INT_PCI, MSC01_IRQ_LEVEL, 0},
};
-int __initdata msc_nr_irqs = sizeof(msc_irqmap)/sizeof(msc_irqmap_t);
+int __initdata msc_nr_irqs = ARRAY_SIZE(msc_irqmap);
msc_irqmap_t __initdata msc_eicirqmap[] = {
{MSC01E_INT_SW0, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_PERFCTR, MSC01_IRQ_LEVEL, 0},
{MSC01E_INT_CPUCTR, MSC01_IRQ_LEVEL, 0}
};
-int __initdata msc_nr_eicirqs = sizeof(msc_eicirqmap)/sizeof(msc_irqmap_t);
+int __initdata msc_nr_eicirqs = ARRAY_SIZE(msc_eicirqmap);
void __init arch_init_irq(void)
{
init_i8259_irqs();
if (!cpu_has_veic)
- mips_cpu_irq_init (MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
switch(mips_revision_corid) {
case MIPS_REVISION_CORID_CORE_MSC:
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
}
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <asm/mips-boards/simint.h>
-
-
-extern void mips_cpu_irq_init(int);
+#include <asm/irq_cpu.h>
static inline int clz(unsigned long x)
{
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPSCPU_INT_BASE);
+ mips_cpu_irq_init();
}
}
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
int i;
- unsigned long freed = 0;
unsigned long addr;
for (i = 0; i < boot_mem_map.nr_map; i++) {
continue;
addr = boot_mem_map.map[i].addr;
- while (addr < boot_mem_map.map[i].addr
- + boot_mem_map.map[i].size) {
- ClearPageReserved(virt_to_page(__va(addr)));
- init_page_count(virt_to_page(__va(addr)));
- free_page((unsigned long)__va(addr));
- addr += PAGE_SIZE;
- freed += PAGE_SIZE;
- }
+ free_init_pages("prom memory",
+ addr, addr + boot_mem_map.map[i].size);
}
- printk("Freeing prom memory: %ldkb freed\n", freed >> 10);
-
- return freed;
}
void __init paging_init(void)
{
unsigned long zones_size[MAX_NR_ZONES] = { 0, };
- unsigned long max_dma, low;
#ifndef CONFIG_FLATMEM
unsigned long zholes_size[MAX_NR_ZONES] = { 0, };
unsigned long i, j, pfn;
#endif
kmap_coherent_init();
- max_dma = virt_to_phys((char *)MAX_DMA_ADDRESS) >> PAGE_SHIFT;
- low = max_low_pfn;
-
#ifdef CONFIG_ISA
- if (low < max_dma)
- zones_size[ZONE_DMA] = low;
- else {
- zones_size[ZONE_DMA] = max_dma;
- zones_size[ZONE_NORMAL] = low - max_dma;
- }
-#else
- zones_size[ZONE_DMA] = low;
+ if (max_low_pfn >= MAX_DMA_PFN)
+ if (min_low_pfn >= MAX_DMA_PFN) {
+ zones_size[ZONE_DMA] = 0;
+ zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn;
+ } else {
+ zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn;
+ zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN;
+ }
+ else
#endif
+ zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn;
+
#ifdef CONFIG_HIGHMEM
zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn;
}
#endif /* !CONFIG_NEED_MULTIPLE_NODES */
-static void free_init_pages(char *what, unsigned long begin, unsigned long end)
+void free_init_pages(const char *what, unsigned long begin, unsigned long end)
{
unsigned long pfn;
}
#endif
-extern unsigned long prom_free_prom_memory(void);
-
void free_initmem(void)
{
- unsigned long freed;
-
- freed = prom_free_prom_memory();
- if (freed)
- printk(KERN_INFO "Freeing firmware memory: %ldkb freed\n",
- freed >> 10);
-
+ prom_free_prom_memory();
free_init_pages("unused kernel memory",
__pa_symbol(&__init_begin),
__pa_symbol(&__init_end));
}
+
+unsigned long pgd_current[NR_CPUS];
+/*
+ * On 64-bit we've got three-level pagetables with a slightly
+ * different layout ...
+ */
+#define __page_aligned(order) __attribute__((__aligned__(PAGE_SIZE<<order)))
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
+#ifdef CONFIG_64BIT
+#ifdef MODULE_START
+pgd_t module_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
+#endif
+pmd_t invalid_pmd_table[PTRS_PER_PMD] __page_aligned(PMD_ORDER);
+#endif
+pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
# unless it's something special (ie not a .c file).
#
-obj-y += irq.o prom.o reset.o setup.o
+obj-y += irq.o platform.o prom.o reset.o setup.o
obj-$(CONFIG_SERIAL_8250_CONSOLE) += ja-console.o
obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
*/
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(8, &cascade_mv64340);
extern unsigned long ja_fpga_base;
-#define JAGUAR_FPGA_WRITE(x,y) writeb(x, ja_fpga_base + JAGUAR_ATX_REG_##y)
-#define JAGUAR_FPGA_READ(x) readb(ja_fpga_base + JAGUAR_ATX_REG_##x)
+#define __FPGA_REG_TO_ADDR(reg) \
+ ((void *) ja_fpga_base + JAGUAR_ATX_REG_##reg)
+#define JAGUAR_FPGA_WRITE(x, reg) writeb(x, __FPGA_REG_TO_ADDR(reg))
+#define JAGUAR_FPGA_READ(reg) readb(__FPGA_REG_TO_ADDR(reg))
#endif
--- /dev/null
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include <linux/ioport.h>
+#include <linux/mv643xx.h>
+#include <linux/platform_device.h>
+
+#include "jaguar_atx_fpga.h"
+
+#if defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE)
+
+static struct resource mv643xx_eth_shared_resources[] = {
+ [0] = {
+ .name = "ethernet shared base",
+ .start = 0xf1000000 + MV643XX_ETH_SHARED_REGS,
+ .end = 0xf1000000 + MV643XX_ETH_SHARED_REGS +
+ MV643XX_ETH_SHARED_REGS_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device mv643xx_eth_shared_device = {
+ .name = MV643XX_ETH_SHARED_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv643xx_eth_shared_resources),
+ .resource = mv643xx_eth_shared_resources,
+};
+
+#define MV_SRAM_BASE 0xfe000000UL
+#define MV_SRAM_SIZE (256 * 1024)
+
+#define MV_SRAM_RXRING_SIZE (MV_SRAM_SIZE / 4)
+#define MV_SRAM_TXRING_SIZE (MV_SRAM_SIZE / 4)
+
+#define MV_SRAM_BASE_ETH0 MV_SRAM_BASE
+#define MV_SRAM_BASE_ETH1 (MV_SRAM_BASE + (MV_SRAM_SIZE / 2))
+
+#define MV64x60_IRQ_ETH_0 48
+#define MV64x60_IRQ_ETH_1 49
+#define MV64x60_IRQ_ETH_2 50
+
+#ifdef CONFIG_MV643XX_ETH_0
+
+static struct resource mv64x60_eth0_resources[] = {
+ [0] = {
+ .name = "eth0 irq",
+ .start = MV64x60_IRQ_ETH_0,
+ .end = MV64x60_IRQ_ETH_0,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth0_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth0_pd = {
+ .mac_addr = eth0_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH0,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH0 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth0_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 0,
+ .num_resources = ARRAY_SIZE(mv64x60_eth0_resources),
+ .resource = mv64x60_eth0_resources,
+ .dev = {
+ .platform_data = ð0_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_0 */
+
+#ifdef CONFIG_MV643XX_ETH_1
+
+static struct resource mv64x60_eth1_resources[] = {
+ [0] = {
+ .name = "eth1 irq",
+ .start = MV64x60_IRQ_ETH_1,
+ .end = MV64x60_IRQ_ETH_1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth1_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth1_pd = {
+ .mac_addr = eth1_mac_addr,
+
+ .tx_sram_addr = MV_SRAM_BASE_ETH1,
+ .tx_sram_size = MV_SRAM_TXRING_SIZE,
+ .tx_queue_size = MV_SRAM_TXRING_SIZE / 16,
+
+ .rx_sram_addr = MV_SRAM_BASE_ETH1 + MV_SRAM_TXRING_SIZE,
+ .rx_sram_size = MV_SRAM_RXRING_SIZE,
+ .rx_queue_size = MV_SRAM_RXRING_SIZE / 16,
+};
+
+static struct platform_device eth1_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth1_resources),
+ .resource = mv64x60_eth1_resources,
+ .dev = {
+ .platform_data = ð1_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_1 */
+
+#ifdef CONFIG_MV643XX_ETH_2
+
+static struct resource mv64x60_eth2_resources[] = {
+ [0] = {
+ .name = "eth2 irq",
+ .start = MV64x60_IRQ_ETH_2,
+ .end = MV64x60_IRQ_ETH_2,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static char eth2_mac_addr[ETH_ALEN];
+
+static struct mv643xx_eth_platform_data eth2_pd = {
+ .mac_addr = eth2_mac_addr,
+};
+
+static struct platform_device eth2_device = {
+ .name = MV643XX_ETH_NAME,
+ .id = 1,
+ .num_resources = ARRAY_SIZE(mv64x60_eth2_resources),
+ .resource = mv64x60_eth2_resources,
+ .dev = {
+ .platform_data = ð2_pd,
+ },
+};
+#endif /* CONFIG_MV643XX_ETH_2 */
+
+static struct platform_device *mv643xx_eth_pd_devs[] __initdata = {
+ &mv643xx_eth_shared_device,
+#ifdef CONFIG_MV643XX_ETH_0
+ ð0_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ ð1_device,
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ ð2_device,
+#endif
+};
+
+static u8 __init exchange_bit(u8 val, u8 cs)
+{
+ /* place the data */
+ JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock on */
+ JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
+ udelay(1);
+
+ /* turn the clock off and read-strobe */
+ JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
+
+ /* return the data */
+ return (JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1;
+}
+
+static void __init get_mac(char dest[6])
+{
+ u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
+ int i,j;
+
+ for (i = 0; i < 12; i++)
+ exchange_bit(read_opcode[i], 1);
+
+ for (j = 0; j < 6; j++) {
+ dest[j] = 0;
+ for (i = 0; i < 8; i++) {
+ dest[j] <<= 1;
+ dest[j] |= exchange_bit(0, 1);
+ }
+ }
+
+ /* turn off CS */
+ exchange_bit(0,0);
+}
+
+/*
+ * Copy and increment ethernet MAC address by a small value.
+ *
+ * This is useful for systems where the only one MAC address is stored in
+ * non-volatile memory for multiple ports.
+ */
+static inline void eth_mac_add(unsigned char *dst, unsigned char *src,
+ unsigned int add)
+{
+ int i;
+
+ BUG_ON(add >= 256);
+
+ for (i = ETH_ALEN; i >= 0; i--) {
+ dst[i] = src[i] + add;
+ add = dst[i] < src[i]; /* compute carry */
+ }
+
+ WARN_ON(add);
+}
+
+static int __init mv643xx_eth_add_pds(void)
+{
+ unsigned char mac[ETH_ALEN];
+ int ret;
+
+ get_mac(mac);
+#ifdef CONFIG_MV643XX_ETH_0
+ eth_mac_add(eth1_mac_addr, mac, 0);
+#endif
+#ifdef CONFIG_MV643XX_ETH_1
+ eth_mac_add(eth1_mac_addr, mac, 1);
+#endif
+#ifdef CONFIG_MV643XX_ETH_2
+ eth_mac_add(eth2_mac_addr, mac, 2);
+#endif
+ ret = platform_add_devices(mv643xx_eth_pd_devs,
+ ARRAY_SIZE(mv643xx_eth_pd_devs));
+
+ return ret;
+}
+
+device_initcall(mv643xx_eth_add_pds);
+
+#endif /* defined(CONFIG_MV643XX_ETH) || defined(CONFIG_MV643XX_ETH_MODULE) */
return "Momentum Jaguar-ATX";
}
-#ifdef CONFIG_MV643XX_ETH
-extern unsigned char prom_mac_addr_base[6];
-
-static void burn_clocks(void)
-{
- int i;
-
- /* this loop should burn at least 1us -- this should be plenty */
- for (i = 0; i < 0x10000; i++)
- ;
-}
-
-static u8 exchange_bit(u8 val, u8 cs)
-{
- /* place the data */
- JAGUAR_FPGA_WRITE((val << 2) | cs, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock on */
- JAGUAR_FPGA_WRITE((val << 2) | cs | 0x2, EEPROM_MODE);
- burn_clocks();
-
- /* turn the clock off and read-strobe */
- JAGUAR_FPGA_WRITE((val << 2) | cs | 0x10, EEPROM_MODE);
-
- /* return the data */
- return ((JAGUAR_FPGA_READ(EEPROM_MODE) >> 3) & 0x1);
-}
-
-void get_mac(char dest[6])
-{
- u8 read_opcode[12] = {1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
- int i,j;
-
- for (i = 0; i < 12; i++)
- exchange_bit(read_opcode[i], 1);
-
- for (j = 0; j < 6; j++) {
- dest[j] = 0;
- for (i = 0; i < 8; i++) {
- dest[j] <<= 1;
- dest[j] |= exchange_bit(0, 1);
- }
- }
-
- /* turn off CS */
- exchange_bit(0,0);
-}
-#endif
-
#ifdef CONFIG_64BIT
unsigned long signext(unsigned long addr)
#endif /* CONFIG_64BIT */
mips_machgroup = MACH_GROUP_MOMENCO;
mips_machtype = MACH_MOMENCO_JAGUAR_ATX;
-
-#ifdef CONFIG_MV643XX_ETH
- /* get the base MAC address for on-board ethernet ports */
- get_mac(prom_mac_addr_base);
-#endif
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
*/
clear_c0_status(ST0_IM | ST0_BEV);
- rm7k_cpu_irq_init(8);
+ rm7k_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(8, &cascade_mv64340); /* unmask intControl IM8, IRQ 9 */
#endif
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
}
struct irq_chip cpci_irq_type = {
- .typename = "CPCI/FPGA",
+ .name = "CPCI/FPGA",
.ack = mask_cpci_irq,
.mask = mask_cpci_irq,
.mask_ack = mask_cpci_irq,
-#ifdef CONFIG_KGDB
-
#include <asm/serial.h> /* For the serial port location and base baud */
/* --- CONFIG --- */
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
-
-#endif
*/
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
+ mips_cpu_irq_init();
/* set up the cascading interrupts */
setup_irq(3, &cascade_fpga);
#endif
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
}
struct irq_chip uart_irq_type = {
- .typename = "UART/FPGA",
+ .name = "UART/FPGA",
.ack = mask_uart_irq,
.mask = mask_uart_irq,
.mask_ack = mask_uart_irq,
-#ifdef CONFIG_KGDB
-
#include <asm/serial.h> /* For the serial port location and base baud */
/* --- CONFIG --- */
UART16550_WRITE(OFS_SEND_BUFFER, byte);
return 1;
}
-
-#endif
clear_c0_status(ST0_IM);
local_irq_disable();
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
gt64240_irq_init();
}
}
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
config OPROFILE
tristate "OProfile system profiling (EXPERIMENTAL)"
- depends on PROFILING && EXPERIMENTAL
+ depends on PROFILING && !!MIPS_MT_SMTC && EXPERIMENTAL
help
OProfile is a profiling system capable of profiling the
whole system, include the kernel, kernel modules, libraries,
*/
#include <linux/init.h>
#include <linux/pci.h>
+#include <linux/kernel.h>
#include <asm/io.h>
+#include <asm/i8259.h>
#include <asm/vr41xx/cmbvr4133.h>
extern int vr4133_rockhopper;
if (bus == NULL)
return -1;
- for (i = 0; i < sizeof (int_map) / sizeof (int_map[0]); i++) {
+ for (i = 0; i < ARRAY_SIZE(int_map); i++) {
if (int_map[i].bus == bus->number && int_map[i].slot == slot) {
int line;
for (line = 0; line < 4; line++)
#ifdef CONFIG_ROCKHOPPER
void i8259_init(void)
{
- outb(0x11, 0x20); /* Master ICW1 */
- outb(I8259_IRQ_BASE, 0x21); /* Master ICW2 */
- outb(0x04, 0x21); /* Master ICW3 */
- outb(0x01, 0x21); /* Master ICW4 */
- outb(0xff, 0x21); /* Master IMW */
-
- outb(0x11, 0xa0); /* Slave ICW1 */
- outb(I8259_IRQ_BASE + 8, 0xa1); /* Slave ICW2 */
- outb(0x02, 0xa1); /* Slave ICW3 */
- outb(0x01, 0xa1); /* Slave ICW4 */
- outb(0xff, 0xa1); /* Slave IMW */
+ init_i8259_irqs();
outb(0x00, 0x4d0);
outb(0x02, 0x4d1); /* USB IRQ9 is level */
}
static struct irq_chip level_irq_type = {
- .typename = "PNX Level IRQ",
+ .name = "PNX Level IRQ",
.ack = mask_irq,
.mask = mask_irq,
.mask_ack = mask_irq,
return 0;
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
extern int pnx8550_console_port;
* Functions to READ and WRITE to serial port 1
*/
#define SERIAL_READ_1(ofs) (*((volatile unsigned char*) \
- (TITAN_SERIAL_BASE_1 + ofs)
+ (TITAN_SERIAL_BASE_1 + ofs)))
#define SERIAL_WRITE_1(ofs, val) ((*((volatile unsigned char*) \
(TITAN_SERIAL_BASE_1 + ofs))) = val)
{
clear_c0_status(ST0_IM);
- mips_cpu_irq_init(0);
- rm7k_cpu_irq_init(8);
- rm9k_cpu_irq_init(12);
+ mips_cpu_irq_init();
+ rm7k_cpu_irq_init();
+ rm9k_cpu_irq_init();
#ifdef CONFIG_KGDB
/* At this point, initialize the second serial port */
prom_grab_secondary();
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
static void __init py_uart_setup(void)
{
+#ifdef CONFIG_SERIAL_8250
struct uart_port up;
/*
if (early_serial_setup(&up))
printk(KERN_ERR "Early serial init of port 0 failed\n");
+#endif /* CONFIG_SERIAL_8250 */
}
static void __init py_rtc_setup(void)
#include <linux/init.h>
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0UL;
}
}
static struct irq_chip ip22_eisa1_irq_type = {
- .typename = "IP22 EISA",
+ .name = "IP22 EISA",
.startup = startup_eisa1_irq,
.ack = mask_and_ack_eisa1_irq,
.mask = disable_eisa1_irq,
}
static struct irq_chip ip22_eisa2_irq_type = {
- .typename = "IP22 EISA",
+ .name = "IP22 EISA",
.startup = startup_eisa2_irq,
.ack = mask_and_ack_eisa2_irq,
.mask = disable_eisa2_irq,
#include <asm/mipsregs.h>
#include <asm/addrspace.h>
+#include <asm/irq_cpu.h>
#include <asm/sgi/ioc.h>
#include <asm/sgi/hpc3.h>
}
static struct irq_chip ip22_local0_irq_type = {
- .typename = "IP22 local 0",
+ .name = "IP22 local 0",
.ack = disable_local0_irq,
.mask = disable_local0_irq,
.mask_ack = disable_local0_irq,
}
static struct irq_chip ip22_local1_irq_type = {
- .typename = "IP22 local 1",
+ .name = "IP22 local 1",
.ack = disable_local1_irq,
.mask = disable_local1_irq,
.mask_ack = disable_local1_irq,
}
static struct irq_chip ip22_local2_irq_type = {
- .typename = "IP22 local 2",
+ .name = "IP22 local 2",
.ack = disable_local2_irq,
.mask = disable_local2_irq,
.mask_ack = disable_local2_irq,
}
static struct irq_chip ip22_local3_irq_type = {
- .typename = "IP22 local 3",
+ .name = "IP22 local 3",
.ack = disable_local3_irq,
.mask = disable_local3_irq,
.mask_ack = disable_local3_irq,
indy_8254timer_irq();
}
-extern void mips_cpu_irq_init(unsigned int irq_base);
-
void __init arch_init_irq(void)
{
int i;
sgint->cmeimask1 = 0;
/* init CPU irqs */
- mips_cpu_irq_init(SGINT_CPU);
+ mips_cpu_irq_init();
for (i = SGINT_LOCAL0; i < SGI_INTERRUPTS; i++) {
struct irq_chip *handler;
}
void __init prom_meminit(void) {}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
}
static struct irq_chip bridge_irq_type = {
- .typename = "bridge",
+ .name = "bridge",
.startup = startup_bridge_irq,
.shutdown = shutdown_bridge_irq,
.ack = disable_bridge_irq,
}
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
/* We got nothing to free here ... */
- return 0;
}
extern void pagetable_init(void);
}
static struct irq_chip rt_irq_type = {
- .typename = "SN HUB RT timer",
+ .name = "SN HUB RT timer",
.ack = disable_rt_irq,
.mask = disable_rt_irq,
.mask_ack = disable_rt_irq,
}
static struct irq_chip ip32_cpu_interrupt = {
- .typename = "IP32 CPU",
+ .name = "IP32 CPU",
.ack = disable_cpu_irq,
.mask = disable_cpu_irq,
.mask_ack = disable_cpu_irq,
}
static struct irq_chip ip32_crime_interrupt = {
- .typename = "IP32 CRIME",
+ .name = "IP32 CRIME",
.ack = mask_and_ack_crime_irq,
.mask = disable_crime_irq,
.mask_ack = mask_and_ack_crime_irq,
}
static struct irq_chip ip32_macepci_interrupt = {
- .typename = "IP32 MACE PCI",
+ .name = "IP32 MACE PCI",
.ack = disable_macepci_irq,
.mask = disable_macepci_irq,
.mask_ack = disable_macepci_irq,
}
static struct irq_chip ip32_maceisa_interrupt = {
- .typename = "IP32 MACE ISA",
+ .name = "IP32 MACE ISA",
.ack = mask_and_ack_maceisa_irq,
.mask = disable_maceisa_irq,
.mask_ack = mask_and_ack_maceisa_irq,
}
static struct irq_chip ip32_mace_interrupt = {
- .typename = "IP32 MACE",
+ .name = "IP32 MACE",
.ack = disable_mace_irq,
.mask = disable_mace_irq,
.mask_ack = disable_mace_irq,
}
-unsigned long __init prom_free_prom_memory (void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
#endif
static struct irq_chip bcm1480_irq_type = {
- .typename = "BCM1480-IMR",
+ .name = "BCM1480-IMR",
.ack = ack_bcm1480_irq,
.mask = disable_bcm1480_irq,
.mask_ack = ack_bcm1480_irq,
prom_meminit();
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
/* Not sure what I'm supposed to do here. Nothing, I think */
- return 0;
}
void prom_putchar(char c)
#endif
static struct irq_chip sb1250_irq_type = {
- .typename = "SB1250-IMR",
+ .name = "SB1250-IMR",
.ack = ack_sb1250_irq,
.mask = disable_sb1250_irq,
.mask_ack = ack_sb1250_irq,
prom_meminit();
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
/* Not sure what I'm supposed to do here. Nothing, I think */
- return 0;
}
void prom_putchar(char c)
}
static struct irq_chip pciasic_irq_type = {
- .typename = "ASIC-PCI",
+ .name = "ASIC-PCI",
.ack = disable_pciasic_irq,
.mask = disable_pciasic_irq,
.mask_ack = disable_pciasic_irq,
va_end(args);
}
-unsigned long prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
/*
#define TX4927_CP0_NAME "TX4927-CP0"
static struct irq_chip tx4927_irq_cp0_type = {
- .typename = TX4927_CP0_NAME,
+ .name = TX4927_CP0_NAME,
.ack = tx4927_irq_cp0_disable,
.mask = tx4927_irq_cp0_disable,
.mask_ack = tx4927_irq_cp0_disable,
#define TX4927_PIC_NAME "TX4927-PIC"
static struct irq_chip tx4927_irq_pic_type = {
- .typename = TX4927_PIC_NAME,
+ .name = TX4927_PIC_NAME,
.ack = tx4927_irq_pic_disable,
.mask = tx4927_irq_pic_disable,
.mask_ack = tx4927_irq_pic_disable,
#define TOSHIBA_RBTX4927_IOC_NAME "RBTX4927-IOC"
static struct irq_chip toshiba_rbtx4927_irq_ioc_type = {
- .typename = TOSHIBA_RBTX4927_IOC_NAME,
+ .name = TOSHIBA_RBTX4927_IOC_NAME,
.ack = toshiba_rbtx4927_irq_ioc_disable,
.mask = toshiba_rbtx4927_irq_ioc_disable,
.mask_ack = toshiba_rbtx4927_irq_ioc_disable,
#ifdef CONFIG_TOSHIBA_FPCIB0
#define TOSHIBA_RBTX4927_ISA_NAME "RBTX4927-ISA"
static struct irq_chip toshiba_rbtx4927_irq_isa_type = {
- .typename = TOSHIBA_RBTX4927_ISA_NAME,
+ .name = TOSHIBA_RBTX4927_ISA_NAME,
.ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
.mask = toshiba_rbtx4927_irq_isa_disable,
.mask_ack = toshiba_rbtx4927_irq_isa_mask_and_ack,
{
u32 i, j = 0;
for (i = 0; i < NR_IRQS; i++) {
- if (strcmp(irq_desc[i].chip->typename, "none")
+ if (strcmp(irq_desc[i].chip->name, "none")
== 0)
continue;
if ((i >= 1)
- && (irq_desc[i - 1].chip->typename ==
- irq_desc[i].chip->typename)) {
+ && (irq_desc[i - 1].chip->name ==
+ irq_desc[i].chip->name)) {
j++;
} else {
j = 0;
(u32) (irq_desc[i].action ? irq_desc[i].
action->handler : 0),
irq_desc[i].depth,
- irq_desc[i].chip->typename, j);
+ irq_desc[i].chip->name, j);
}
}
#endif
add_memory_region(0, msize << 20, BOOT_MEM_RAM);
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
const char *get_system_type(void)
#define TX4938_CP0_NAME "TX4938-CP0"
static struct irq_chip tx4938_irq_cp0_type = {
- .typename = TX4938_CP0_NAME,
+ .name = TX4938_CP0_NAME,
.ack = tx4938_irq_cp0_disable,
.mask = tx4938_irq_cp0_disable,
.mask_ack = tx4938_irq_cp0_disable,
#define TX4938_PIC_NAME "TX4938-PIC"
static struct irq_chip tx4938_irq_pic_type = {
- .typename = TX4938_PIC_NAME,
+ .name = TX4938_PIC_NAME,
.ack = tx4938_irq_pic_disable,
.mask = tx4938_irq_pic_disable,
.mask_ack = tx4938_irq_pic_disable,
#define TOSHIBA_RBTX4938_IOC_NAME "RBTX4938-IOC"
static struct irq_chip toshiba_rbtx4938_irq_ioc_type = {
- .typename = TOSHIBA_RBTX4938_IOC_NAME,
+ .name = TOSHIBA_RBTX4938_IOC_NAME,
.ack = toshiba_rbtx4938_irq_ioc_disable,
.mask = toshiba_rbtx4938_irq_ioc_disable,
.mask_ack = toshiba_rbtx4938_irq_ioc_disable,
return;
}
-unsigned long __init prom_free_prom_memory(void)
+void __init prom_free_prom_memory(void)
{
- return 0;
}
void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
*
* Copyright (C) 2001-2002 MontaVista Software Inc.
* Author: Yoichi Yuasa <yyuasa@mvista.com or source@mvista.com>
- * Copyright (C) 2003-2005 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ * Copyright (C) 2003-2006 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#define MPIUINTREG 0x0e
#define MAIUINTREG 0x10
#define MKIUINTREG 0x12
+#define MMACINTREG 0x12
#define MGIUINTLREG 0x14
#define MDSIUINTREG 0x16
#define NMIREG 0x18
EXPORT_SYMBOL(vr41xx_disable_kiuint);
+void vr41xx_enable_macint(uint16_t mask)
+{
+ struct irq_desc *desc = irq_desc + ETHERNET_IRQ;
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ icu1_set(MMACINTREG, mask);
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+EXPORT_SYMBOL(vr41xx_enable_macint);
+
+void vr41xx_disable_macint(uint16_t mask)
+{
+ struct irq_desc *desc = irq_desc + ETHERNET_IRQ;
+ unsigned long flags;
+
+ spin_lock_irqsave(&desc->lock, flags);
+ icu1_clear(MMACINTREG, mask);
+ spin_unlock_irqrestore(&desc->lock, flags);
+}
+
+EXPORT_SYMBOL(vr41xx_disable_macint);
+
void vr41xx_enable_dsiuint(uint16_t mask)
{
struct irq_desc *desc = irq_desc + DSIU_IRQ;
}
static struct irq_chip sysint1_irq_type = {
- .typename = "SYSINT1",
+ .name = "SYSINT1",
.ack = disable_sysint1_irq,
.mask = disable_sysint1_irq,
.mask_ack = disable_sysint1_irq,
}
static struct irq_chip sysint2_irq_type = {
- .typename = "SYSINT2",
+ .name = "SYSINT2",
.ack = disable_sysint2_irq,
.mask = disable_sysint2_irq,
.mask_ack = disable_sysint2_irq,
}
}
-unsigned long __init prom_free_prom_memory (void)
+void __init prom_free_prom_memory(void)
{
- return 0UL;
}
unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM;
if (pending & CAUSEF_IP7)
- do_IRQ(7);
+ do_IRQ(TIMER_IRQ);
else if (pending & 0x7800) {
if (pending & CAUSEF_IP3)
- irq_dispatch(3);
+ irq_dispatch(INT1_IRQ);
else if (pending & CAUSEF_IP4)
- irq_dispatch(4);
+ irq_dispatch(INT2_IRQ);
else if (pending & CAUSEF_IP5)
- irq_dispatch(5);
+ irq_dispatch(INT3_IRQ);
else if (pending & CAUSEF_IP6)
- irq_dispatch(6);
+ irq_dispatch(INT4_IRQ);
} else if (pending & CAUSEF_IP2)
- irq_dispatch(2);
+ irq_dispatch(INT0_IRQ);
else if (pending & CAUSEF_IP0)
- do_IRQ(0);
+ do_IRQ(MIPS_SOFTINT0_IRQ);
else if (pending & CAUSEF_IP1)
- do_IRQ(1);
+ do_IRQ(MIPS_SOFTINT1_IRQ);
else
spurious_interrupt();
}
void __init arch_init_irq(void)
{
- mips_cpu_irq_init(MIPS_CPU_IRQ_BASE);
+ mips_cpu_irq_init();
}
#include <linux/interrupt.h>
#include <asm/io.h>
+#include <asm/i8259.h>
#include <asm/vr41xx/cmbvr4133.h>
-extern void enable_8259A_irq(unsigned int irq);
-extern void disable_8259A_irq(unsigned int irq);
-extern void mask_and_ack_8259A(unsigned int irq);
-extern void init_8259A(int hoge);
-
extern int vr4133_rockhopper;
-static void enable_i8259_irq(unsigned int irq)
-{
- enable_8259A_irq(irq - I8259_IRQ_BASE);
-}
-
-static void disable_i8259_irq(unsigned int irq)
-{
- disable_8259A_irq(irq - I8259_IRQ_BASE);
-}
-
-static void ack_i8259_irq(unsigned int irq)
-{
- mask_and_ack_8259A(irq - I8259_IRQ_BASE);
-}
-
-static struct irq_chip i8259_irq_type = {
- .typename = "XT-PIC",
- .ack = ack_i8259_irq,
- .mask = disable_i8259_irq,
- .mask_ack = ack_i8259_irq,
- .unmask = enable_i8259_irq,
-};
-
static int i8259_get_irq_number(int irq)
{
- unsigned long isr;
-
- isr = inb(0x20);
- irq = ffz(~isr);
- if (irq == 2) {
- isr = inb(0xa0);
- irq = 8 + ffz(~isr);
- }
-
- if (irq < 0 || irq > 15)
- return -EINVAL;
-
- return I8259_IRQ_BASE + irq;
+ return i8259_irq();
}
-static struct irqaction i8259_slave_cascade = {
- .handler = &no_action,
- .name = "cascade",
-};
-
void __init rockhopper_init_irq(void)
{
int i;
return;
}
- for (i = I8259_IRQ_BASE; i <= I8259_IRQ_LAST; i++)
- set_irq_chip_and_handler(i, &i8259_irq_type, handle_level_irq);
-
- setup_irq(I8259_SLAVE_IRQ, &i8259_slave_cascade);
-
vr41xx_set_irq_trigger(CMBVR41XX_INTC_PIN, TRIGGER_LEVEL, SIGNAL_THROUGH);
vr41xx_set_irq_level(CMBVR41XX_INTC_PIN, LEVEL_HIGH);
vr41xx_cascade_irq(CMBVR41XX_INTC_IRQ, i8259_get_irq_number);
bool "Sony PS3 (incomplete)"
depends on PPC_MULTIPLATFORM && PPC64
select PPC_CELL
+ select USB_ARCH_HAS_OHCI
+ select USB_OHCI_LITTLE_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_MMIO
+ select USB_ARCH_HAS_EHCI
+ select USB_EHCI_BIG_ENDIAN_MMIO
help
This option enables support for the Sony PS3 game console
and other platforms using the PS3 hypervisor.
pci_device_add(dev, bus);
- /* XXX pci_scan_msi_device(dev); */
-
return dev;
}
EXPORT_SYMBOL(of_create_pci_dev);
bool
default y
-config GENERIC_CALIBRATE_DELAY
- bool
- default y
-
config GENERIC_TIME
def_bool y
bool
default y
+config S390_SWITCH_AMODE
+ bool "Switch kernel/user addressing modes"
+ help
+ This option allows to switch the addressing modes of kernel and user
+ space. The kernel parameter switch_amode=on will enable this feature,
+ default is disabled. Enabling this (via kernel parameter) on machines
+ earlier than IBM System z9-109 EC/BC will reduce system performance.
+
+ Note that this option will also be selected by selecting the execute
+ protection option below. Enabling the execute protection via the
+ noexec kernel parameter will also switch the addressing modes,
+ independent of the switch_amode kernel parameter.
+
+
+config S390_EXEC_PROTECT
+ bool "Data execute protection"
+ select S390_SWITCH_AMODE
+ help
+ This option allows to enable a buffer overflow protection for user
+ space programs and it also selects the addressing mode option above.
+ The kernel parameter noexec=on will enable this feature and also
+ switch the addressing modes, default is disabled. Enabling this (via
+ kernel parameter) on machines earlier than IBM System z9-109 EC/BC
+ will reduce system performance.
+
comment "Code generation options"
choice
/*
* Timer
*/
-DEFINE_PER_CPU(struct vtimer_list, appldata_timer);
+static DEFINE_PER_CPU(struct vtimer_list, appldata_timer);
static atomic_t appldata_expire_count = ATOMIC_INIT(0);
static DEFINE_SPINLOCK(appldata_timer_lock);
* book:
* http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml
*/
-struct appldata_mem_data {
+static struct appldata_mem_data {
u64 timestamp;
u32 sync_count_1; /* after VM collected the record data, */
u32 sync_count_2; /* sync_count_1 and sync_count_2 should be the
* book:
* http://oss.software.ibm.com/developerworks/opensource/linux390/index.shtml
*/
-struct appldata_net_sum_data {
+static struct appldata_net_sum_data {
u64 timestamp;
u32 sync_count_1; /* after VM collected the record data, */
u32 sync_count_2; /* sync_count_1 and sync_count_2 should be the
--- /dev/null
+config CRYPTO_SHA1_S390
+ tristate "SHA1 digest algorithm"
+ depends on S390
+ select CRYPTO_ALGAPI
+ help
+ This is the s390 hardware accelerated implementation of the
+ SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
+
+config CRYPTO_SHA256_S390
+ tristate "SHA256 digest algorithm"
+ depends on S390
+ select CRYPTO_ALGAPI
+ help
+ This is the s390 hardware accelerated implementation of the
+ SHA256 secure hash standard (DFIPS 180-2).
+
+ This version of SHA implements a 256 bit hash with 128 bits of
+ security against collision attacks.
+
+config CRYPTO_DES_S390
+ tristate "DES and Triple DES cipher algorithms"
+ depends on S390
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLKCIPHER
+ help
+ This us the s390 hardware accelerated implementation of the
+ DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
+
+config CRYPTO_AES_S390
+ tristate "AES cipher algorithms"
+ depends on S390
+ select CRYPTO_ALGAPI
+ select CRYPTO_BLKCIPHER
+ help
+ This is the s390 hardware accelerated implementation of the
+ AES cipher algorithms (FIPS-197). AES uses the Rijndael
+ algorithm.
+
+ Rijndael appears to be consistently a very good performer in
+ both hardware and software across a wide range of computing
+ environments regardless of its use in feedback or non-feedback
+ modes. Its key setup time is excellent, and its key agility is
+ good. Rijndael's very low memory requirements make it very well
+ suited for restricted-space environments, in which it also
+ demonstrates excellent performance. Rijndael's operations are
+ among the easiest to defend against power and timing attacks.
+
+ On s390 the System z9-109 currently only supports the key size
+ of 128 bit.
+
+config S390_PRNG
+ tristate "Pseudo random number generator device driver"
+ depends on S390
+ default "m"
+ help
+ Select this option if you want to use the s390 pseudo random number
+ generator. The PRNG is part of the cryptograhic processor functions
+ and uses triple-DES to generate secure random numbers like the
+ ANSI X9.17 standard. The PRNG is usable via the char device
+ /dev/prandom.
obj-$(CONFIG_CRYPTO_SHA256_S390) += sha256_s390.o
obj-$(CONFIG_CRYPTO_DES_S390) += des_s390.o des_check_key.o
obj-$(CONFIG_CRYPTO_AES_S390) += aes_s390.o
-
-obj-$(CONFIG_CRYPTO_TEST) += crypt_s390_query.o
+obj-$(CONFIG_S390_PRNG) += prng.o
* s390 implementation of the AES Cipher Algorithm.
*
* s390 Version:
- * Copyright (C) 2005 IBM Deutschland GmbH, IBM Corporation
+ * Copyright IBM Corp. 2005,2007
* Author(s): Jan Glauber (jang@de.ibm.com)
*
* Derived from "crypto/aes.c"
/* data block size for all key lengths */
#define AES_BLOCK_SIZE 16
-int has_aes_128 = 0;
-int has_aes_192 = 0;
-int has_aes_256 = 0;
+#define AES_KEYLEN_128 1
+#define AES_KEYLEN_192 2
+#define AES_KEYLEN_256 4
+
+static char keylen_flag = 0;
struct s390_aes_ctx {
u8 iv[AES_BLOCK_SIZE];
switch (key_len) {
case 16:
- if (!has_aes_128)
+ if (!(keylen_flag & AES_KEYLEN_128))
goto fail;
break;
case 24:
- if (!has_aes_192)
+ if (!(keylen_flag & AES_KEYLEN_192))
goto fail;
break;
case 32:
- if (!has_aes_256)
+ if (!(keylen_flag & AES_KEYLEN_256))
goto fail;
break;
default:
- /* invalid key length */
goto fail;
break;
}
int ret;
if (crypt_s390_func_available(KM_AES_128_ENCRYPT))
- has_aes_128 = 1;
+ keylen_flag |= AES_KEYLEN_128;
if (crypt_s390_func_available(KM_AES_192_ENCRYPT))
- has_aes_192 = 1;
+ keylen_flag |= AES_KEYLEN_192;
if (crypt_s390_func_available(KM_AES_256_ENCRYPT))
- has_aes_256 = 1;
+ keylen_flag |= AES_KEYLEN_256;
+
+ if (!keylen_flag)
+ return -EOPNOTSUPP;
- if (!has_aes_128 && !has_aes_192 && !has_aes_256)
- return -ENOSYS;
+ /* z9 109 and z9 BC/EC only support 128 bit key length */
+ if (keylen_flag == AES_KEYLEN_128)
+ printk(KERN_INFO
+ "aes_s390: hardware acceleration only available for"
+ "128 bit keys\n");
ret = crypto_register_alg(&aes_alg);
- if (ret != 0) {
- printk(KERN_INFO "crypt_s390: aes-s390 couldn't be loaded.\n");
+ if (ret)
goto aes_err;
- }
ret = crypto_register_alg(&ecb_aes_alg);
- if (ret != 0) {
- printk(KERN_INFO
- "crypt_s390: ecb-aes-s390 couldn't be loaded.\n");
+ if (ret)
goto ecb_aes_err;
- }
ret = crypto_register_alg(&cbc_aes_alg);
- if (ret != 0) {
- printk(KERN_INFO
- "crypt_s390: cbc-aes-s390 couldn't be loaded.\n");
+ if (ret)
goto cbc_aes_err;
- }
out:
return ret;
*
* Support for s390 cryptographic instructions.
*
- * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
+ * Copyright IBM Corp. 2003,2007
+ * Author(s): Thomas Spatzier
+ * Jan Glauber (jan.glauber@de.ibm.com)
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
CRYPT_S390_KMAC = 0x0500
};
-/* function codes for KM (CIPHER MESSAGE) instruction
+/*
+ * function codes for KM (CIPHER MESSAGE) instruction
* 0x80 is the decipher modifier bit
*/
enum crypt_s390_km_func {
KM_AES_256_DECRYPT = CRYPT_S390_KM | 0x14 | 0x80,
};
-/* function codes for KMC (CIPHER MESSAGE WITH CHAINING)
+/*
+ * function codes for KMC (CIPHER MESSAGE WITH CHAINING)
* instruction
*/
enum crypt_s390_kmc_func {
KMC_AES_192_DECRYPT = CRYPT_S390_KMC | 0x13 | 0x80,
KMC_AES_256_ENCRYPT = CRYPT_S390_KMC | 0x14,
KMC_AES_256_DECRYPT = CRYPT_S390_KMC | 0x14 | 0x80,
+ KMC_PRNG = CRYPT_S390_KMC | 0x43,
};
-/* function codes for KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST)
+/*
+ * function codes for KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST)
* instruction
*/
enum crypt_s390_kimd_func {
KIMD_SHA_256 = CRYPT_S390_KIMD | 2,
};
-/* function codes for KLMD (COMPUTE LAST MESSAGE DIGEST)
+/*
+ * function codes for KLMD (COMPUTE LAST MESSAGE DIGEST)
* instruction
*/
enum crypt_s390_klmd_func {
KLMD_SHA_256 = CRYPT_S390_KLMD | 2,
};
-/* function codes for KMAC (COMPUTE MESSAGE AUTHENTICATION CODE)
+/*
+ * function codes for KMAC (COMPUTE MESSAGE AUTHENTICATION CODE)
* instruction
*/
enum crypt_s390_kmac_func {
KMAC_TDEA_192 = CRYPT_S390_KMAC | 3
};
-/* status word for s390 crypto instructions' QUERY functions */
-struct crypt_s390_query_status {
- u64 high;
- u64 low;
-};
-
-/*
+/**
+ * crypt_s390_km:
+ * @func: the function code passed to KM; see crypt_s390_km_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ *
* Executes the KM (CIPHER MESSAGE) operation of the CPU.
- * @param func: the function code passed to KM; see crypt_s390_km_func
- * @param param: address of parameter block; see POP for details on each func
- * @param dest: address of destination memory area
- * @param src: address of source memory area
- * @param src_len: length of src operand in bytes
- * @returns < zero for failure, 0 for the query func, number of processed bytes
- * for encryption/decryption funcs
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for encryption/decryption funcs
*/
-static inline int
-crypt_s390_km(long func, void* param, u8* dest, const u8* src, long src_len)
+static inline int crypt_s390_km(long func, void *param,
+ u8 *dest, const u8 *src, long src_len)
{
register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
- register void* __param asm("1") = param;
- register const u8* __src asm("2") = src;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
register long __src_len asm("3") = src_len;
- register u8* __dest asm("4") = dest;
+ register u8 *__dest asm("4") = dest;
int ret;
asm volatile(
"0: .insn rre,0xb92e0000,%3,%1 \n" /* KM opcode */
"1: brc 1,0b \n" /* handle partial completion */
- " ahi %0,%h7\n"
- "2: ahi %0,%h8\n"
- "3:\n"
- EX_TABLE(0b,3b) EX_TABLE(1b,2b)
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
- : "d" (__func), "a" (__param), "0" (-EFAULT),
- "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory");
+ : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
return ret;
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
-/*
+/**
+ * crypt_s390_kmc:
+ * @func: the function code passed to KM; see crypt_s390_kmc_func
+ * @param: address of parameter block; see POP for details on each func
+ * @dest: address of destination memory area
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ *
* Executes the KMC (CIPHER MESSAGE WITH CHAINING) operation of the CPU.
- * @param func: the function code passed to KM; see crypt_s390_kmc_func
- * @param param: address of parameter block; see POP for details on each func
- * @param dest: address of destination memory area
- * @param src: address of source memory area
- * @param src_len: length of src operand in bytes
- * @returns < zero for failure, 0 for the query func, number of processed bytes
- * for encryption/decryption funcs
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for encryption/decryption funcs
*/
-static inline int
-crypt_s390_kmc(long func, void* param, u8* dest, const u8* src, long src_len)
+static inline int crypt_s390_kmc(long func, void *param,
+ u8 *dest, const u8 *src, long src_len)
{
register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
- register void* __param asm("1") = param;
- register const u8* __src asm("2") = src;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
register long __src_len asm("3") = src_len;
- register u8* __dest asm("4") = dest;
+ register u8 *__dest asm("4") = dest;
int ret;
asm volatile(
"0: .insn rre,0xb92f0000,%3,%1 \n" /* KMC opcode */
"1: brc 1,0b \n" /* handle partial completion */
- " ahi %0,%h7\n"
- "2: ahi %0,%h8\n"
- "3:\n"
- EX_TABLE(0b,3b) EX_TABLE(1b,2b)
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len), "+a" (__dest)
- : "d" (__func), "a" (__param), "0" (-EFAULT),
- "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory");
+ : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
return ret;
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
-/*
+/**
+ * crypt_s390_kimd:
+ * @func: the function code passed to KM; see crypt_s390_kimd_func
+ * @param: address of parameter block; see POP for details on each func
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ *
* Executes the KIMD (COMPUTE INTERMEDIATE MESSAGE DIGEST) operation
* of the CPU.
- * @param func: the function code passed to KM; see crypt_s390_kimd_func
- * @param param: address of parameter block; see POP for details on each func
- * @param src: address of source memory area
- * @param src_len: length of src operand in bytes
- * @returns < zero for failure, 0 for the query func, number of processed bytes
- * for digest funcs
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for digest funcs
*/
-static inline int
-crypt_s390_kimd(long func, void* param, const u8* src, long src_len)
+static inline int crypt_s390_kimd(long func, void *param,
+ const u8 *src, long src_len)
{
register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
- register void* __param asm("1") = param;
- register const u8* __src asm("2") = src;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
register long __src_len asm("3") = src_len;
int ret;
asm volatile(
"0: .insn rre,0xb93e0000,%1,%1 \n" /* KIMD opcode */
"1: brc 1,0b \n" /* handle partial completion */
- " ahi %0,%h6\n"
- "2: ahi %0,%h7\n"
- "3:\n"
- EX_TABLE(0b,3b) EX_TABLE(1b,2b)
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
- : "d" (__func), "a" (__param), "0" (-EFAULT),
- "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory");
+ : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
return ret;
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
-/*
+/**
+ * crypt_s390_klmd:
+ * @func: the function code passed to KM; see crypt_s390_klmd_func
+ * @param: address of parameter block; see POP for details on each func
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ *
* Executes the KLMD (COMPUTE LAST MESSAGE DIGEST) operation of the CPU.
- * @param func: the function code passed to KM; see crypt_s390_klmd_func
- * @param param: address of parameter block; see POP for details on each func
- * @param src: address of source memory area
- * @param src_len: length of src operand in bytes
- * @returns < zero for failure, 0 for the query func, number of processed bytes
- * for digest funcs
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for digest funcs
*/
-static inline int
-crypt_s390_klmd(long func, void* param, const u8* src, long src_len)
+static inline int crypt_s390_klmd(long func, void *param,
+ const u8 *src, long src_len)
{
register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
- register void* __param asm("1") = param;
- register const u8* __src asm("2") = src;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
register long __src_len asm("3") = src_len;
int ret;
asm volatile(
"0: .insn rre,0xb93f0000,%1,%1 \n" /* KLMD opcode */
"1: brc 1,0b \n" /* handle partial completion */
- " ahi %0,%h6\n"
- "2: ahi %0,%h7\n"
- "3:\n"
- EX_TABLE(0b,3b) EX_TABLE(1b,2b)
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
- : "d" (__func), "a" (__param), "0" (-EFAULT),
- "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory");
+ : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
return ret;
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
-/*
+/**
+ * crypt_s390_kmac:
+ * @func: the function code passed to KM; see crypt_s390_klmd_func
+ * @param: address of parameter block; see POP for details on each func
+ * @src: address of source memory area
+ * @src_len: length of src operand in bytes
+ *
* Executes the KMAC (COMPUTE MESSAGE AUTHENTICATION CODE) operation
* of the CPU.
- * @param func: the function code passed to KM; see crypt_s390_klmd_func
- * @param param: address of parameter block; see POP for details on each func
- * @param src: address of source memory area
- * @param src_len: length of src operand in bytes
- * @returns < zero for failure, 0 for the query func, number of processed bytes
- * for digest funcs
+ *
+ * Returns -1 for failure, 0 for the query func, number of processed
+ * bytes for digest funcs
*/
-static inline int
-crypt_s390_kmac(long func, void* param, const u8* src, long src_len)
+static inline int crypt_s390_kmac(long func, void *param,
+ const u8 *src, long src_len)
{
register long __func asm("0") = func & CRYPT_S390_FUNC_MASK;
- register void* __param asm("1") = param;
- register const u8* __src asm("2") = src;
+ register void *__param asm("1") = param;
+ register const u8 *__src asm("2") = src;
register long __src_len asm("3") = src_len;
int ret;
asm volatile(
"0: .insn rre,0xb91e0000,%1,%1 \n" /* KLAC opcode */
"1: brc 1,0b \n" /* handle partial completion */
- " ahi %0,%h6\n"
- "2: ahi %0,%h7\n"
- "3:\n"
- EX_TABLE(0b,3b) EX_TABLE(1b,2b)
+ " la %0,0\n"
+ "2:\n"
+ EX_TABLE(0b,2b) EX_TABLE(1b,2b)
: "=d" (ret), "+a" (__src), "+d" (__src_len)
- : "d" (__func), "a" (__param), "0" (-EFAULT),
- "K" (ENOSYS), "K" (-ENOSYS + EFAULT) : "cc", "memory");
+ : "d" (__func), "a" (__param), "0" (-1) : "cc", "memory");
if (ret < 0)
return ret;
return (func & CRYPT_S390_FUNC_MASK) ? src_len - __src_len : __src_len;
}
/**
+ * crypt_s390_func_available:
+ * @func: the function code of the specific function; 0 if op in general
+ *
* Tests if a specific crypto function is implemented on the machine.
- * @param func: the function code of the specific function; 0 if op in general
- * @return 1 if func available; 0 if func or op in general not available
+ *
+ * Returns 1 if func available; 0 if func or op in general not available
*/
-static inline int
-crypt_s390_func_available(int func)
+static inline int crypt_s390_func_available(int func)
{
+ unsigned char status[16];
int ret;
- struct crypt_s390_query_status status = {
- .high = 0,
- .low = 0
- };
- switch (func & CRYPT_S390_OP_MASK){
- case CRYPT_S390_KM:
- ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
- break;
- case CRYPT_S390_KMC:
- ret = crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0);
- break;
- case CRYPT_S390_KIMD:
- ret = crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0);
- break;
- case CRYPT_S390_KLMD:
- ret = crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0);
- break;
- case CRYPT_S390_KMAC:
- ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
- break;
- default:
- ret = 0;
- return ret;
- }
- if (ret >= 0){
- func &= CRYPT_S390_FUNC_MASK;
- func &= 0x7f; //mask modifier bit
- if (func < 64){
- ret = (status.high >> (64 - func - 1)) & 0x1;
- } else {
- ret = (status.low >> (128 - func - 1)) & 0x1;
- }
- } else {
- ret = 0;
+ switch (func & CRYPT_S390_OP_MASK) {
+ case CRYPT_S390_KM:
+ ret = crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
+ break;
+ case CRYPT_S390_KMC:
+ ret = crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0);
+ break;
+ case CRYPT_S390_KIMD:
+ ret = crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0);
+ break;
+ case CRYPT_S390_KLMD:
+ ret = crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0);
+ break;
+ case CRYPT_S390_KMAC:
+ ret = crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
+ break;
+ default:
+ return 0;
}
- return ret;
+ if (ret < 0)
+ return 0;
+ func &= CRYPT_S390_FUNC_MASK;
+ func &= 0x7f; /* mask modifier bit */
+ return (status[func >> 3] & (0x80 >> (func & 7))) != 0;
}
-#endif // _CRYPTO_ARCH_S390_CRYPT_S390_H
+#endif /* _CRYPTO_ARCH_S390_CRYPT_S390_H */
+++ /dev/null
-/*
- * Cryptographic API.
- *
- * Support for s390 cryptographic instructions.
- * Testing module for querying processor crypto capabilities.
- *
- * Copyright (c) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- *
- */
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <asm/errno.h>
-#include "crypt_s390.h"
-
-static void query_available_functions(void)
-{
- printk(KERN_INFO "#####################\n");
-
- /* query available KM functions */
- printk(KERN_INFO "KM_QUERY: %d\n",
- crypt_s390_func_available(KM_QUERY));
- printk(KERN_INFO "KM_DEA: %d\n",
- crypt_s390_func_available(KM_DEA_ENCRYPT));
- printk(KERN_INFO "KM_TDEA_128: %d\n",
- crypt_s390_func_available(KM_TDEA_128_ENCRYPT));
- printk(KERN_INFO "KM_TDEA_192: %d\n",
- crypt_s390_func_available(KM_TDEA_192_ENCRYPT));
- printk(KERN_INFO "KM_AES_128: %d\n",
- crypt_s390_func_available(KM_AES_128_ENCRYPT));
- printk(KERN_INFO "KM_AES_192: %d\n",
- crypt_s390_func_available(KM_AES_192_ENCRYPT));
- printk(KERN_INFO "KM_AES_256: %d\n",
- crypt_s390_func_available(KM_AES_256_ENCRYPT));
-
- /* query available KMC functions */
- printk(KERN_INFO "KMC_QUERY: %d\n",
- crypt_s390_func_available(KMC_QUERY));
- printk(KERN_INFO "KMC_DEA: %d\n",
- crypt_s390_func_available(KMC_DEA_ENCRYPT));
- printk(KERN_INFO "KMC_TDEA_128: %d\n",
- crypt_s390_func_available(KMC_TDEA_128_ENCRYPT));
- printk(KERN_INFO "KMC_TDEA_192: %d\n",
- crypt_s390_func_available(KMC_TDEA_192_ENCRYPT));
- printk(KERN_INFO "KMC_AES_128: %d\n",
- crypt_s390_func_available(KMC_AES_128_ENCRYPT));
- printk(KERN_INFO "KMC_AES_192: %d\n",
- crypt_s390_func_available(KMC_AES_192_ENCRYPT));
- printk(KERN_INFO "KMC_AES_256: %d\n",
- crypt_s390_func_available(KMC_AES_256_ENCRYPT));
-
- /* query available KIMD functions */
- printk(KERN_INFO "KIMD_QUERY: %d\n",
- crypt_s390_func_available(KIMD_QUERY));
- printk(KERN_INFO "KIMD_SHA_1: %d\n",
- crypt_s390_func_available(KIMD_SHA_1));
- printk(KERN_INFO "KIMD_SHA_256: %d\n",
- crypt_s390_func_available(KIMD_SHA_256));
-
- /* query available KLMD functions */
- printk(KERN_INFO "KLMD_QUERY: %d\n",
- crypt_s390_func_available(KLMD_QUERY));
- printk(KERN_INFO "KLMD_SHA_1: %d\n",
- crypt_s390_func_available(KLMD_SHA_1));
- printk(KERN_INFO "KLMD_SHA_256: %d\n",
- crypt_s390_func_available(KLMD_SHA_256));
-
- /* query available KMAC functions */
- printk(KERN_INFO "KMAC_QUERY: %d\n",
- crypt_s390_func_available(KMAC_QUERY));
- printk(KERN_INFO "KMAC_DEA: %d\n",
- crypt_s390_func_available(KMAC_DEA));
- printk(KERN_INFO "KMAC_TDEA_128: %d\n",
- crypt_s390_func_available(KMAC_TDEA_128));
- printk(KERN_INFO "KMAC_TDEA_192: %d\n",
- crypt_s390_func_available(KMAC_TDEA_192));
-}
-
-static int init(void)
-{
- struct crypt_s390_query_status status = {
- .high = 0,
- .low = 0
- };
-
- printk(KERN_INFO "crypt_s390: querying available crypto functions\n");
- crypt_s390_km(KM_QUERY, &status, NULL, NULL, 0);
- printk(KERN_INFO "KM:\t%016llx %016llx\n",
- (unsigned long long) status.high,
- (unsigned long long) status.low);
- status.high = status.low = 0;
- crypt_s390_kmc(KMC_QUERY, &status, NULL, NULL, 0);
- printk(KERN_INFO "KMC:\t%016llx %016llx\n",
- (unsigned long long) status.high,
- (unsigned long long) status.low);
- status.high = status.low = 0;
- crypt_s390_kimd(KIMD_QUERY, &status, NULL, 0);
- printk(KERN_INFO "KIMD:\t%016llx %016llx\n",
- (unsigned long long) status.high,
- (unsigned long long) status.low);
- status.high = status.low = 0;
- crypt_s390_klmd(KLMD_QUERY, &status, NULL, 0);
- printk(KERN_INFO "KLMD:\t%016llx %016llx\n",
- (unsigned long long) status.high,
- (unsigned long long) status.low);
- status.high = status.low = 0;
- crypt_s390_kmac(KMAC_QUERY, &status, NULL, 0);
- printk(KERN_INFO "KMAC:\t%016llx %016llx\n",
- (unsigned long long) status.high,
- (unsigned long long) status.low);
-
- query_available_functions();
- return -ECANCELED;
-}
-
-static void __exit cleanup(void)
-{
-}
-
-module_init(init);
-module_exit(cleanup);
-
-MODULE_LICENSE("GPL");
* scatterlist interface. Changed LGPL to GPL per section 3 of the LGPL.
*
* s390 Version:
- * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
+ * Copyright IBM Corp. 2003
+ * Author(s): Thomas Spatzier
+ * Jan Glauber (jan.glauber@de.ibm.com)
*
* Derived from "crypto/des.c"
* Copyright (c) 1992 Dana L. How.
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/crypto.h>
+#include "crypto_des.h"
#define ROR(d,c,o) ((d) = (d) >> (c) | (d) << (o))
*
* s390 implementation of the DES Cipher Algorithm.
*
- * Copyright (c) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
- *
+ * Copyright IBM Corp. 2003,2007
+ * Author(s): Thomas Spatzier
+ * Jan Glauber (jan.glauber@de.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
if (!crypt_s390_func_available(KM_DEA_ENCRYPT) ||
!crypt_s390_func_available(KM_TDEA_128_ENCRYPT) ||
!crypt_s390_func_available(KM_TDEA_192_ENCRYPT))
- return -ENOSYS;
+ return -EOPNOTSUPP;
ret = crypto_register_alg(&des_alg);
if (ret)
--- /dev/null
+/*
+ * Copyright IBM Corp. 2006,2007
+ * Author(s): Jan Glauber <jan.glauber@de.ibm.com>
+ * Driver for the s390 pseudo random number generator
+ */
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/miscdevice.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/random.h>
+#include <asm/debug.h>
+#include <asm/uaccess.h>
+
+#include "crypt_s390.h"
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Jan Glauber <jan.glauber@de.ibm.com>");
+MODULE_DESCRIPTION("s390 PRNG interface");
+
+static int prng_chunk_size = 256;
+module_param(prng_chunk_size, int, S_IRUSR | S_IRGRP | S_IROTH);
+MODULE_PARM_DESC(prng_chunk_size, "PRNG read chunk size in bytes");
+
+static int prng_entropy_limit = 4096;
+module_param(prng_entropy_limit, int, S_IRUSR | S_IRGRP | S_IROTH | S_IWUSR);
+MODULE_PARM_DESC(prng_entropy_limit,
+ "PRNG add entropy after that much bytes were produced");
+
+/*
+ * Any one who considers arithmetical methods of producing random digits is,
+ * of course, in a state of sin. -- John von Neumann
+ */
+
+struct s390_prng_data {
+ unsigned long count; /* how many bytes were produced */
+ char *buf;
+};
+
+static struct s390_prng_data *p;
+
+/* copied from libica, use a non-zero initial parameter block */
+static unsigned char parm_block[32] = {
+0x0F,0x2B,0x8E,0x63,0x8C,0x8E,0xD2,0x52,0x64,0xB7,0xA0,0x7B,0x75,0x28,0xB8,0xF4,
+0x75,0x5F,0xD2,0xA6,0x8D,0x97,0x11,0xFF,0x49,0xD8,0x23,0xF3,0x7E,0x21,0xEC,0xA0,
+};
+
+static int prng_open(struct inode *inode, struct file *file)
+{
+ return nonseekable_open(inode, file);
+}
+
+static void prng_add_entropy(void)
+{
+ __u64 entropy[4];
+ unsigned int i;
+ int ret;
+
+ for (i = 0; i < 16; i++) {
+ ret = crypt_s390_kmc(KMC_PRNG, parm_block, (char *)entropy,
+ (char *)entropy, sizeof(entropy));
+ BUG_ON(ret < 0 || ret != sizeof(entropy));
+ memcpy(parm_block, entropy, sizeof(entropy));
+ }
+}
+
+static void prng_seed(int nbytes)
+{
+ char buf[16];
+ int i = 0;
+
+ BUG_ON(nbytes > 16);
+ get_random_bytes(buf, nbytes);
+
+ /* Add the entropy */
+ while (nbytes >= 8) {
+ *((__u64 *)parm_block) ^= *((__u64 *)buf+i*8);
+ prng_add_entropy();
+ i += 8;
+ nbytes -= 8;
+ }
+ prng_add_entropy();
+}
+
+static ssize_t prng_read(struct file *file, char __user *ubuf, size_t nbytes,
+ loff_t *ppos)
+{
+ int chunk, n;
+ int ret = 0;
+ int tmp;
+
+ /* nbytes can be arbitrary long, we spilt it into chunks */
+ while (nbytes) {
+ /* same as in extract_entropy_user in random.c */
+ if (need_resched()) {
+ if (signal_pending(current)) {
+ if (ret == 0)
+ ret = -ERESTARTSYS;
+ break;
+ }
+ schedule();
+ }
+
+ /*
+ * we lose some random bytes if an attacker issues
+ * reads < 8 bytes, but we don't care
+ */
+ chunk = min_t(int, nbytes, prng_chunk_size);
+
+ /* PRNG only likes multiples of 8 bytes */
+ n = (chunk + 7) & -8;
+
+ if (p->count > prng_entropy_limit)
+ prng_seed(8);
+
+ /* if the CPU supports PRNG stckf is present too */
+ asm volatile(".insn s,0xb27c0000,%0"
+ : "=m" (*((unsigned long long *)p->buf)) : : "cc");
+
+ /*
+ * Beside the STCKF the input for the TDES-EDE is the output
+ * of the last operation. We differ here from X9.17 since we
+ * only store one timestamp into the buffer. Padding the whole
+ * buffer with timestamps does not improve security, since
+ * successive stckf have nearly constant offsets.
+ * If an attacker knows the first timestamp it would be
+ * trivial to guess the additional values. One timestamp
+ * is therefore enough and still guarantees unique input values.
+ *
+ * Note: you can still get strict X9.17 conformity by setting
+ * prng_chunk_size to 8 bytes.
+ */
+ tmp = crypt_s390_kmc(KMC_PRNG, parm_block, p->buf, p->buf, n);
+ BUG_ON((tmp < 0) || (tmp != n));
+
+ p->count += n;
+
+ if (copy_to_user(ubuf, p->buf, chunk))
+ return -EFAULT;
+
+ nbytes -= chunk;
+ ret += chunk;
+ ubuf += chunk;
+ }
+ return ret;
+}
+
+static struct file_operations prng_fops = {
+ .owner = THIS_MODULE,
+ .open = &prng_open,
+ .release = NULL,
+ .read = &prng_read,
+};
+
+static struct miscdevice prng_dev = {
+ .name = "prandom",
+ .minor = MISC_DYNAMIC_MINOR,
+ .fops = &prng_fops,
+};
+
+static int __init prng_init(void)
+{
+ int ret;
+
+ /* check if the CPU has a PRNG */
+ if (!crypt_s390_func_available(KMC_PRNG))
+ return -EOPNOTSUPP;
+
+ if (prng_chunk_size < 8)
+ return -EINVAL;
+
+ p = kmalloc(sizeof(struct s390_prng_data), GFP_KERNEL);
+ if (!p)
+ return -ENOMEM;
+ p->count = 0;
+
+ p->buf = kmalloc(prng_chunk_size, GFP_KERNEL);
+ if (!p->buf) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+
+ /* initialize the PRNG, add 128 bits of entropy */
+ prng_seed(16);
+
+ ret = misc_register(&prng_dev);
+ if (ret) {
+ printk(KERN_WARNING
+ "Could not register misc device for PRNG.\n");
+ goto out_buf;
+ }
+ return 0;
+
+out_buf:
+ kfree(p->buf);
+out_free:
+ kfree(p);
+ return ret;
+}
+
+static void __exit prng_exit(void)
+{
+ /* wipe me */
+ memset(p->buf, 0, prng_chunk_size);
+ kfree(p->buf);
+ kfree(p);
+
+ misc_deregister(&prng_dev);
+}
+
+module_init(prng_init);
+module_exit(prng_exit);
* implementation written by Steve Reid.
*
* s390 Version:
- * Copyright (C) 2003 IBM Deutschland GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
+ * Copyright IBM Corp. 2003,2007
+ * Author(s): Thomas Spatzier
+ * Jan Glauber (jan.glauber@de.ibm.com)
*
* Derived from "crypto/sha1.c"
* Copyright (c) Alan Smithee.
static void sha1_init(struct crypto_tfm *tfm)
{
struct crypt_s390_sha1_ctx *ctx = crypto_tfm_ctx(tfm);
- static const u32 initstate[5] = {
- 0x67452301,
- 0xEFCDAB89,
- 0x98BADCFE,
- 0x10325476,
- 0xC3D2E1F0
- };
+
+ ctx->state[0] = 0x67452301;
+ ctx->state[1] = 0xEFCDAB89;
+ ctx->state[2] = 0x98BADCFE;
+ ctx->state[3] = 0x10325476;
+ ctx->state[4] = 0xC3D2E1F0;
ctx->count = 0;
- memcpy(ctx->state, &initstate, sizeof(initstate));
ctx->buf_len = 0;
}
long imd_len;
sctx = crypto_tfm_ctx(tfm);
- sctx->count += len * 8; //message bit length
+ sctx->count += len * 8; /* message bit length */
- //anything in buffer yet? -> must be completed
+ /* anything in buffer yet? -> must be completed */
if (sctx->buf_len && (sctx->buf_len + len) >= SHA1_BLOCK_SIZE) {
- //complete full block and hash
+ /* complete full block and hash */
memcpy(sctx->buffer + sctx->buf_len, data,
- SHA1_BLOCK_SIZE - sctx->buf_len);
+ SHA1_BLOCK_SIZE - sctx->buf_len);
crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer,
SHA1_BLOCK_SIZE);
data += SHA1_BLOCK_SIZE - sctx->buf_len;
sctx->buf_len = 0;
}
- //rest of data contains full blocks?
+ /* rest of data contains full blocks? */
imd_len = len & ~0x3ful;
- if (imd_len){
+ if (imd_len) {
crypt_s390_kimd(KIMD_SHA_1, sctx->state, data, imd_len);
data += imd_len;
len -= imd_len;
}
- //anything left? store in buffer
- if (len){
+ /* anything left? store in buffer */
+ if (len) {
memcpy(sctx->buffer + sctx->buf_len , data, len);
sctx->buf_len += len;
}
}
-static void
-pad_message(struct crypt_s390_sha1_ctx* sctx)
+static void pad_message(struct crypt_s390_sha1_ctx* sctx)
{
int index;
index = sctx->buf_len;
- sctx->buf_len = (sctx->buf_len < 56)?
- SHA1_BLOCK_SIZE:2 * SHA1_BLOCK_SIZE;
- //start pad with 1
+ sctx->buf_len = (sctx->buf_len < 56) ?
+ SHA1_BLOCK_SIZE:2 * SHA1_BLOCK_SIZE;
+ /* start pad with 1 */
sctx->buffer[index] = 0x80;
- //pad with zeros
+ /* pad with zeros */
index++;
memset(sctx->buffer + index, 0x00, sctx->buf_len - index);
- //append length
+ /* append length */
memcpy(sctx->buffer + sctx->buf_len - 8, &sctx->count,
- sizeof sctx->count);
+ sizeof sctx->count);
}
/* Add padding and return the message digest. */
{
struct crypt_s390_sha1_ctx *sctx = crypto_tfm_ctx(tfm);
- //must perform manual padding
+ /* must perform manual padding */
pad_message(sctx);
crypt_s390_kimd(KIMD_SHA_1, sctx->state, sctx->buffer, sctx->buf_len);
- //copy digest to out
+ /* copy digest to out */
memcpy(out, sctx->state, SHA1_DIGEST_SIZE);
- /* Wipe context */
+ /* wipe context */
memset(sctx, 0, sizeof *sctx);
}
static struct crypto_alg alg = {
.cra_name = "sha1",
- .cra_driver_name = "sha1-s390",
+ .cra_driver_name= "sha1-s390",
.cra_priority = CRYPT_S390_PRIORITY,
.cra_flags = CRYPTO_ALG_TYPE_DIGEST,
.cra_blocksize = SHA1_BLOCK_SIZE,
.cra_ctxsize = sizeof(struct crypt_s390_sha1_ctx),
.cra_module = THIS_MODULE,
- .cra_list = LIST_HEAD_INIT(alg.cra_list),
+ .cra_list = LIST_HEAD_INIT(alg.cra_list),
.cra_u = { .digest = {
.dia_digestsize = SHA1_DIGEST_SIZE,
- .dia_init = sha1_init,
- .dia_update = sha1_update,
- .dia_final = sha1_final } }
+ .dia_init = sha1_init,
+ .dia_update = sha1_update,
+ .dia_final = sha1_final } }
};
-static int
-init(void)
+static int __init init(void)
{
- int ret = -ENOSYS;
+ if (!crypt_s390_func_available(KIMD_SHA_1))
+ return -EOPNOTSUPP;
- if (crypt_s390_func_available(KIMD_SHA_1)){
- ret = crypto_register_alg(&alg);
- if (ret == 0){
- printk(KERN_INFO "crypt_s390: sha1_s390 loaded.\n");
- }
- }
- return ret;
+ return crypto_register_alg(&alg);
}
-static void __exit
-fini(void)
+static void __exit fini(void)
{
crypto_unregister_alg(&alg);
}
* s390 implementation of the SHA256 Secure Hash Algorithm.
*
* s390 Version:
- * Copyright (C) 2005 IBM Deutschland GmbH, IBM Corporation
+ * Copyright IBM Corp. 2005,2007
* Author(s): Jan Glauber (jang@de.ibm.com)
*
* Derived from "crypto/sha256.c"
static int init(void)
{
- int ret;
-
if (!crypt_s390_func_available(KIMD_SHA_256))
- return -ENOSYS;
+ return -EOPNOTSUPP;
- ret = crypto_register_alg(&alg);
- if (ret != 0)
- printk(KERN_INFO "crypt_s390: sha256_s390 couldn't be loaded.");
- return ret;
+ return crypto_register_alg(&alg);
}
static void __exit fini(void)
CONFIG_COMPAT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_AUDIT_ARCH=y
+CONFIG_S390_SWITCH_AMODE=y
+CONFIG_S390_EXEC_PROTECT=y
#
# Code generation options
CONFIG_TN3215=y
CONFIG_TN3215_CONSOLE=y
CONFIG_CCW_CONSOLE=y
-CONFIG_SCLP=y
CONFIG_SCLP_TTY=y
CONFIG_SCLP_CONSOLE=y
CONFIG_SCLP_VT220_TTY=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA1_S390 is not set
# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA256_S390 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
CONFIG_CRYPTO_CBC=y
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_DES is not set
-# CONFIG_CRYPTO_DES_S390 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_TWOFISH is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_AES_S390 is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_TEA is not set
#
# Hardware crypto devices
#
+# CONFIG_CRYPTO_SHA1_S390 is not set
+# CONFIG_CRYPTO_SHA256_S390 is not set
+# CONFIG_CRYPTO_DES_S390 is not set
+# CONFIG_CRYPTO_AES_S390 is not set
+CONFIG_S390_PRNG=m
#
# Library routines
obj-$(CONFIG_S390_HYPFS_FS) += s390_hypfs.o
-s390_hypfs-objs := inode.o hypfs_diag.o
+s390_hypfs-objs := inode.o hypfs_diag.o hypfs_vm.o
struct dentry *dir, const char *name,
char *string);
+/* LPAR Hypervisor */
+extern int hypfs_diag_init(void);
+extern void hypfs_diag_exit(void);
+extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root);
+
+/* VM Hypervisor */
+extern int hypfs_vm_init(void);
+extern int hypfs_vm_create_files(struct super_block *sb, struct dentry *root);
+
#endif /* _HYPFS_H_ */
+++ /dev/null
-/*
- * arch/s390/hypfs_diag.h
- * Hypervisor filesystem for Linux on s390.
- *
- * Copyright (C) IBM Corp. 2006
- * Author(s): Michael Holzheu <holzheu@de.ibm.com>
- */
-
-#ifndef _HYPFS_DIAG_H_
-#define _HYPFS_DIAG_H_
-
-extern int hypfs_diag_init(void);
-extern void hypfs_diag_exit(void);
-extern int hypfs_diag_create_files(struct super_block *sb, struct dentry *root);
-
-#endif /* _HYPFS_DIAG_H_ */
--- /dev/null
+/*
+ * Hypervisor filesystem for Linux on s390. z/VM implementation.
+ *
+ * Copyright (C) IBM Corp. 2006
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/vmalloc.h>
+#include <asm/ebcdic.h>
+#include "hypfs.h"
+
+#define NAME_LEN 8
+
+static char local_guest[] = " ";
+static char all_guests[] = "* ";
+static char *guest_query;
+
+struct diag2fc_data {
+ __u32 version;
+ __u32 flags;
+ __u64 used_cpu;
+ __u64 el_time;
+ __u64 mem_min_kb;
+ __u64 mem_max_kb;
+ __u64 mem_share_kb;
+ __u64 mem_used_kb;
+ __u32 pcpus;
+ __u32 lcpus;
+ __u32 vcpus;
+ __u32 cpu_min;
+ __u32 cpu_max;
+ __u32 cpu_shares;
+ __u32 cpu_use_samp;
+ __u32 cpu_delay_samp;
+ __u32 page_wait_samp;
+ __u32 idle_samp;
+ __u32 other_samp;
+ __u32 total_samp;
+ char guest_name[NAME_LEN];
+};
+
+struct diag2fc_parm_list {
+ char userid[NAME_LEN];
+ char aci_grp[NAME_LEN];
+ __u64 addr;
+ __u32 size;
+ __u32 fmt;
+};
+
+static int diag2fc(int size, char* query, void *addr)
+{
+ unsigned long residual_cnt;
+ unsigned long rc;
+ struct diag2fc_parm_list parm_list;
+
+ memcpy(parm_list.userid, query, NAME_LEN);
+ ASCEBC(parm_list.userid, NAME_LEN);
+ parm_list.addr = (unsigned long) addr ;
+ parm_list.size = size;
+ parm_list.fmt = 0x02;
+ memset(parm_list.aci_grp, 0x40, NAME_LEN);
+ rc = -1;
+
+ asm volatile(
+ " diag %0,%1,0x2fc\n"
+ "0:\n"
+ EX_TABLE(0b,0b)
+ : "=d" (residual_cnt), "+d" (rc) : "0" (&parm_list) : "memory");
+
+ if ((rc != 0 ) && (rc != -2))
+ return rc;
+ else
+ return -residual_cnt;
+}
+
+static struct diag2fc_data *diag2fc_store(char *query, int *count)
+{
+ int size;
+ struct diag2fc_data *data;
+
+ do {
+ size = diag2fc(0, query, NULL);
+ if (size < 0)
+ return ERR_PTR(-EACCES);
+ data = vmalloc(size);
+ if (!data)
+ return ERR_PTR(-ENOMEM);
+ if (diag2fc(size, query, data) == 0)
+ break;
+ vfree(data);
+ } while (1);
+ *count = (size / sizeof(*data));
+
+ return data;
+}
+
+static void diag2fc_free(void *data)
+{
+ vfree(data);
+}
+
+#define ATTRIBUTE(sb, dir, name, member) \
+do { \
+ void *rc; \
+ rc = hypfs_create_u64(sb, dir, name, member); \
+ if (IS_ERR(rc)) \
+ return PTR_ERR(rc); \
+} while(0)
+
+static int hpyfs_vm_create_guest(struct super_block *sb,
+ struct dentry *systems_dir,
+ struct diag2fc_data *data)
+{
+ char guest_name[NAME_LEN + 1] = {};
+ struct dentry *guest_dir, *cpus_dir, *samples_dir, *mem_dir;
+ int dedicated_flag, capped_value;
+
+ capped_value = (data->flags & 0x00000006) >> 1;
+ dedicated_flag = (data->flags & 0x00000008) >> 3;
+
+ /* guest dir */
+ memcpy(guest_name, data->guest_name, NAME_LEN);
+ EBCASC(guest_name, NAME_LEN);
+ strstrip(guest_name);
+ guest_dir = hypfs_mkdir(sb, systems_dir, guest_name);
+ if (IS_ERR(guest_dir))
+ return PTR_ERR(guest_dir);
+ ATTRIBUTE(sb, guest_dir, "onlinetime_us", data->el_time);
+
+ /* logical cpu information */
+ cpus_dir = hypfs_mkdir(sb, guest_dir, "cpus");
+ if (IS_ERR(cpus_dir))
+ return PTR_ERR(cpus_dir);
+ ATTRIBUTE(sb, cpus_dir, "cputime_us", data->used_cpu);
+ ATTRIBUTE(sb, cpus_dir, "capped", capped_value);
+ ATTRIBUTE(sb, cpus_dir, "dedicated", dedicated_flag);
+ ATTRIBUTE(sb, cpus_dir, "count", data->vcpus);
+ ATTRIBUTE(sb, cpus_dir, "weight_min", data->cpu_min);
+ ATTRIBUTE(sb, cpus_dir, "weight_max", data->cpu_max);
+ ATTRIBUTE(sb, cpus_dir, "weight_cur", data->cpu_shares);
+
+ /* memory information */
+ mem_dir = hypfs_mkdir(sb, guest_dir, "mem");
+ if (IS_ERR(mem_dir))
+ return PTR_ERR(mem_dir);
+ ATTRIBUTE(sb, mem_dir, "min_KiB", data->mem_min_kb);
+ ATTRIBUTE(sb, mem_dir, "max_KiB", data->mem_max_kb);
+ ATTRIBUTE(sb, mem_dir, "used_KiB", data->mem_used_kb);
+ ATTRIBUTE(sb, mem_dir, "share_KiB", data->mem_share_kb);
+
+ /* samples */
+ samples_dir = hypfs_mkdir(sb, guest_dir, "samples");
+ if (IS_ERR(samples_dir))
+ return PTR_ERR(samples_dir);
+ ATTRIBUTE(sb, samples_dir, "cpu_using", data->cpu_use_samp);
+ ATTRIBUTE(sb, samples_dir, "cpu_delay", data->cpu_delay_samp);
+ ATTRIBUTE(sb, samples_dir, "mem_delay", data->page_wait_samp);
+ ATTRIBUTE(sb, samples_dir, "idle", data->idle_samp);
+ ATTRIBUTE(sb, samples_dir, "other", data->other_samp);
+ ATTRIBUTE(sb, samples_dir, "total", data->total_samp);
+ return 0;
+}
+
+int hypfs_vm_create_files(struct super_block *sb, struct dentry *root)
+{
+ struct dentry *dir, *file;
+ struct diag2fc_data *data;
+ int rc, i, count = 0;
+
+ data = diag2fc_store(guest_query, &count);
+ if (IS_ERR(data))
+ return PTR_ERR(data);
+
+ /* Hpervisor Info */
+ dir = hypfs_mkdir(sb, root, "hyp");
+ if (IS_ERR(dir)) {
+ rc = PTR_ERR(dir);
+ goto failed;
+ }
+ file = hypfs_create_str(sb, dir, "type", "z/VM Hypervisor");
+ if (IS_ERR(file)) {
+ rc = PTR_ERR(file);
+ goto failed;
+ }
+
+ /* physical cpus */
+ dir = hypfs_mkdir(sb, root, "cpus");
+ if (IS_ERR(dir)) {
+ rc = PTR_ERR(dir);
+ goto failed;
+ }
+ file = hypfs_create_u64(sb, dir, "count", data->lcpus);
+ if (IS_ERR(file)) {
+ rc = PTR_ERR(file);
+ goto failed;
+ }
+
+ /* guests */
+ dir = hypfs_mkdir(sb, root, "systems");
+ if (IS_ERR(dir)) {
+ rc = PTR_ERR(dir);
+ goto failed;
+ }
+
+ for (i = 0; i < count; i++) {
+ rc = hpyfs_vm_create_guest(sb, dir, &(data[i]));
+ if (rc)
+ goto failed;
+ }
+ diag2fc_free(data);
+ return 0;
+
+failed:
+ diag2fc_free(data);
+ return rc;
+}
+
+int hypfs_vm_init(void)
+{
+ if (diag2fc(0, all_guests, NULL) > 0)
+ guest_query = all_guests;
+ else if (diag2fc(0, local_guest, NULL) > 0)
+ guest_query = local_guest;
+ else
+ return -EACCES;
+
+ return 0;
+}
#include <linux/module.h>
#include <asm/ebcdic.h>
#include "hypfs.h"
-#include "hypfs_diag.h"
#define HYPFS_MAGIC 0x687970 /* ASCII 'hyp' */
#define TMP_SIZE 64 /* size of temporary buffers */
goto out;
}
hypfs_delete_tree(sb->s_root);
- rc = hypfs_diag_create_files(sb, sb->s_root);
+ if (MACHINE_IS_VM)
+ rc = hypfs_vm_create_files(sb, sb->s_root);
+ else
+ rc = hypfs_diag_create_files(sb, sb->s_root);
if (rc) {
printk(KERN_ERR "hypfs: Update failed\n");
hypfs_delete_tree(sb->s_root);
rc = -ENOMEM;
goto err_alloc;
}
- rc = hypfs_diag_create_files(sb, root_dentry);
+ if (MACHINE_IS_VM)
+ rc = hypfs_vm_create_files(sb, root_dentry);
+ else
+ rc = hypfs_diag_create_files(sb, root_dentry);
if (rc)
goto err_tree;
sbi->update_file = hypfs_create_update_file(sb, root_dentry);
{
int rc;
- if (MACHINE_IS_VM)
- return -ENODATA;
- if (hypfs_diag_init()) {
- rc = -ENODATA;
- goto fail_diag;
+ if (MACHINE_IS_VM) {
+ if (hypfs_vm_init())
+ /* no diag 2fc, just exit */
+ return -ENODATA;
+ } else {
+ if (hypfs_diag_init()) {
+ rc = -ENODATA;
+ goto fail_diag;
+ }
}
kset_set_kset_s(&s390_subsys, hypervisor_subsys);
rc = subsystem_register(&s390_subsys);
fail_filesystem:
subsystem_unregister(&s390_subsys);
fail_sysfs:
- hypfs_diag_exit();
+ if (!MACHINE_IS_VM)
+ hypfs_diag_exit();
fail_diag:
printk(KERN_ERR "hypfs: Initialization failed with rc = %i.\n", rc);
return rc;
static void __exit hypfs_exit(void)
{
- hypfs_diag_exit();
+ if (!MACHINE_IS_VM)
+ hypfs_diag_exit();
unregister_filesystem(&hypfs_type);
subsystem_unregister(&s390_subsys);
}
EXTRA_AFLAGS := -traditional
-obj-y := bitmap.o traps.o time.o process.o reset.o \
+obj-y := bitmap.o traps.o time.o process.o base.o early.o \
setup.o sys_s390.o ptrace.o signal.o cpcmd.o ebcdic.o \
- semaphore.o s390_ext.o debug.o profile.o irq.o ipl.o
+ semaphore.o s390_ext.o debug.o irq.o ipl.o
obj-y += $(if $(CONFIG_64BIT),entry64.o,entry.o)
obj-y += $(if $(CONFIG_64BIT),reipl64.o,reipl.o)
--- /dev/null
+/*
+ * arch/s390/kernel/base.S
+ *
+ * Copyright IBM Corp. 2006,2007
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ * Michael Holzheu <holzheu@de.ibm.com>
+ */
+
+#include <asm/ptrace.h>
+#include <asm/lowcore.h>
+
+#ifdef CONFIG_64BIT
+
+ .globl s390_base_mcck_handler
+s390_base_mcck_handler:
+ basr %r13,0
+0: lg %r15,__LC_PANIC_STACK # load panic stack
+ aghi %r15,-STACK_FRAME_OVERHEAD
+ larl %r1,s390_base_mcck_handler_fn
+ lg %r1,0(%r1)
+ ltgr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+1: la %r1,4095
+ lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
+ lpswe __LC_MCK_OLD_PSW
+
+ .section .bss
+ .globl s390_base_mcck_handler_fn
+s390_base_mcck_handler_fn:
+ .quad 0
+ .previous
+
+ .globl s390_base_ext_handler
+s390_base_ext_handler:
+ stmg %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: aghi %r15,-STACK_FRAME_OVERHEAD
+ larl %r1,s390_base_ext_handler_fn
+ lg %r1,0(%r1)
+ ltgr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+1: lmg %r0,%r15,__LC_SAVE_AREA
+ ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
+ lpswe __LC_EXT_OLD_PSW
+
+ .section .bss
+ .globl s390_base_ext_handler_fn
+s390_base_ext_handler_fn:
+ .quad 0
+ .previous
+
+ .globl s390_base_pgm_handler
+s390_base_pgm_handler:
+ stmg %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: aghi %r15,-STACK_FRAME_OVERHEAD
+ larl %r1,s390_base_pgm_handler_fn
+ lg %r1,0(%r1)
+ ltgr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+ lmg %r0,%r15,__LC_SAVE_AREA
+ lpswe __LC_PGM_OLD_PSW
+1: lpswe disabled_wait_psw-0b(%r13)
+
+ .align 8
+disabled_wait_psw:
+ .quad 0x0002000180000000,0x0000000000000000 + s390_base_pgm_handler
+
+ .section .bss
+ .globl s390_base_pgm_handler_fn
+s390_base_pgm_handler_fn:
+ .quad 0
+ .previous
+
+#else /* CONFIG_64BIT */
+
+ .globl s390_base_mcck_handler
+s390_base_mcck_handler:
+ basr %r13,0
+0: l %r15,__LC_PANIC_STACK # load panic stack
+ ahi %r15,-STACK_FRAME_OVERHEAD
+ l %r1,2f-0b(%r13)
+ l %r1,0(%r1)
+ ltr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+1: lm %r0,%r15,__LC_GPREGS_SAVE_AREA
+ lpsw __LC_MCK_OLD_PSW
+
+2: .long s390_base_mcck_handler_fn
+
+ .section .bss
+ .globl s390_base_mcck_handler_fn
+s390_base_mcck_handler_fn:
+ .long 0
+ .previous
+
+ .globl s390_base_ext_handler
+s390_base_ext_handler:
+ stm %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: ahi %r15,-STACK_FRAME_OVERHEAD
+ l %r1,2f-0b(%r13)
+ l %r1,0(%r1)
+ ltr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+1: lm %r0,%r15,__LC_SAVE_AREA
+ ni __LC_EXT_OLD_PSW+1,0xfd # clear wait state bit
+ lpsw __LC_EXT_OLD_PSW
+
+2: .long s390_base_ext_handler_fn
+
+ .section .bss
+ .globl s390_base_ext_handler_fn
+s390_base_ext_handler_fn:
+ .long 0
+ .previous
+
+ .globl s390_base_pgm_handler
+s390_base_pgm_handler:
+ stm %r0,%r15,__LC_SAVE_AREA
+ basr %r13,0
+0: ahi %r15,-STACK_FRAME_OVERHEAD
+ l %r1,2f-0b(%r13)
+ l %r1,0(%r1)
+ ltr %r1,%r1
+ jz 1f
+ basr %r14,%r1
+ lm %r0,%r15,__LC_SAVE_AREA
+ lpsw __LC_PGM_OLD_PSW
+
+1: lpsw disabled_wait_psw-0b(%r13)
+
+2: .long s390_base_pgm_handler_fn
+
+disabled_wait_psw:
+ .align 8
+ .long 0x000a0000,0x00000000 + s390_base_pgm_handler
+
+ .section .bss
+ .globl s390_base_pgm_handler_fn
+s390_base_pgm_handler_fn:
+ .long 0
+ .previous
+
+#endif /* CONFIG_64BIT */
#undef cputime_to_timeval
#define cputime_to_timeval cputime_to_compat_timeval
-static __inline__ void
+static inline void
cputime_to_compat_timeval(const cputime_t cputime, struct compat_timeval *value)
{
value->tv_usec = cputime % 1000000;
#include <linux/personality.h>
#include <linux/sched.h>
-struct exec_domain s390_exec_domain;
+static struct exec_domain s390_exec_domain;
-static int __init
-s390_init (void)
+static int __init s390_init (void)
{
s390_exec_domain.name = "Linux/s390";
s390_exec_domain.handler = NULL;
#include "compat_linux.h"
+long psw_user32_bits = (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
+ PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+ PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
+long psw32_user_bits = (PSW32_BASE_BITS | PSW32_MASK_DAT | PSW32_ASC_HOME |
+ PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
+ PSW32_MASK_PSTATE);
/* For this source file, we want overflow handling. */
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sysinfo((struct sysinfo __user *) &s);
+ ret = sys_sysinfo((struct sysinfo __force __user *) &s);
set_fs (old_fs);
err = put_user (s.uptime, &info->uptime);
err |= __put_user (s.loads[0], &info->loads[0]);
mm_segment_t old_fs = get_fs ();
set_fs (KERNEL_DS);
- ret = sys_sched_rr_get_interval(pid, (struct timespec __user *) &t);
+ ret = sys_sched_rr_get_interval(pid,
+ (struct timespec __force __user *) &t);
set_fs (old_fs);
if (put_compat_timespec(&t, interval))
return -EFAULT;
}
set_fs (KERNEL_DS);
ret = sys_rt_sigprocmask(how,
- set ? (sigset_t __user *) &s : NULL,
- oset ? (sigset_t __user *) &s : NULL,
+ set ? (sigset_t __force __user *) &s : NULL,
+ oset ? (sigset_t __force __user *) &s : NULL,
sigsetsize);
set_fs (old_fs);
if (ret) return ret;
mm_segment_t old_fs = get_fs();
set_fs (KERNEL_DS);
- ret = sys_rt_sigpending((sigset_t __user *) &s, sigsetsize);
+ ret = sys_rt_sigpending((sigset_t __force __user *) &s, sigsetsize);
set_fs (old_fs);
if (!ret) {
switch (_NSIG_WORDS) {
if (copy_siginfo_from_user32(&info, uinfo))
return -EFAULT;
set_fs (KERNEL_DS);
- ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __user *) &info);
+ ret = sys_rt_sigqueueinfo(pid, sig, (siginfo_t __force __user *) &info);
set_fs (old_fs);
return ret;
}
set_fs(KERNEL_DS);
ret = sys_sendfile(out_fd, in_fd,
- offset ? (off_t __user *) &of : NULL, count);
+ offset ? (off_t __force __user *) &of : NULL, count);
set_fs(old_fs);
if (offset && put_user(of, offset))
set_fs(KERNEL_DS);
ret = sys_sendfile64(out_fd, in_fd,
- offset ? (loff_t __user *) &lof : NULL, count);
+ offset ? (loff_t __force __user *) &lof : NULL,
+ count);
set_fs(old_fs);
if (offset && put_user(lof, offset))
__u32 addr;
} _psw_t32 __attribute__ ((aligned(8)));
-#define PSW32_MASK_PER 0x40000000UL
-#define PSW32_MASK_DAT 0x04000000UL
-#define PSW32_MASK_IO 0x02000000UL
-#define PSW32_MASK_EXT 0x01000000UL
-#define PSW32_MASK_KEY 0x00F00000UL
-#define PSW32_MASK_MCHECK 0x00040000UL
-#define PSW32_MASK_WAIT 0x00020000UL
-#define PSW32_MASK_PSTATE 0x00010000UL
-#define PSW32_MASK_ASC 0x0000C000UL
-#define PSW32_MASK_CC 0x00003000UL
-#define PSW32_MASK_PM 0x00000f00UL
-
-#define PSW32_ADDR_AMODE31 0x80000000UL
-#define PSW32_ADDR_INSN 0x7FFFFFFFUL
-
-#define PSW32_BASE_BITS 0x00080000UL
-
-#define PSW32_ASC_PRIMARY 0x00000000UL
-#define PSW32_ASC_ACCREG 0x00004000UL
-#define PSW32_ASC_SECONDARY 0x00008000UL
-#define PSW32_ASC_HOME 0x0000C000UL
-
-#define PSW32_USER_BITS (PSW32_BASE_BITS | PSW32_MASK_DAT | PSW32_ASC_HOME | \
- PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK | \
- PSW32_MASK_PSTATE)
-
-#define PSW32_MASK_MERGE(CURRENT,NEW) \
- (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
- ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
-
-
typedef struct
{
_psw_t32 psw;
}
set_fs (KERNEL_DS);
- ret = do_sigaltstack((stack_t __user *) (uss ? &kss : NULL),
- (stack_t __user *) (uoss ? &koss : NULL),
+ ret = do_sigaltstack((stack_t __force __user *) (uss ? &kss : NULL),
+ (stack_t __force __user *) (uoss ? &koss : NULL),
regs->gprs[15]);
set_fs (old_fs);
_s390_regs_common32 regs32;
int err, i;
- regs32.psw.mask = PSW32_MASK_MERGE(PSW32_USER_BITS,
+ regs32.psw.mask = PSW32_MASK_MERGE(psw32_user_bits,
(__u32)(regs->psw.mask >> 32));
regs32.psw.addr = PSW32_ADDR_AMODE31 | (__u32) regs->psw.addr;
for (i = 0; i < NUM_GPRS; i++)
goto badframe;
set_fs (KERNEL_DS);
- do_sigaltstack((stack_t __user *)&st, NULL, regs->gprs[15]);
+ do_sigaltstack((stack_t __force __user *)&st, NULL, regs->gprs[15]);
set_fs (old_fs);
return regs->gprs[2];
#include <asm/ebcdic.h>
#include <asm/cpcmd.h>
#include <asm/system.h>
+#include <asm/io.h>
static DEFINE_SPINLOCK(cpcmd_lock);
static char cpcmd_buf[241];
int len;
unsigned long flags;
- if ((rlen == 0) || (response == NULL)
- || !((unsigned long)response >> 31)) {
- spin_lock_irqsave(&cpcmd_lock, flags);
- len = __cpcmd(cmd, response, rlen, response_code);
- spin_unlock_irqrestore(&cpcmd_lock, flags);
- }
- else {
+ if ((virt_to_phys(response) != (unsigned long) response) ||
+ (((unsigned long)response + rlen) >> 31)) {
lowbuf = kmalloc(rlen, GFP_KERNEL | GFP_DMA);
if (!lowbuf) {
printk(KERN_WARNING
spin_unlock_irqrestore(&cpcmd_lock, flags);
memcpy(response, lowbuf, rlen);
kfree(lowbuf);
+ } else {
+ spin_lock_irqsave(&cpcmd_lock, flags);
+ len = __cpcmd(cmd, response, rlen, response_code);
+ spin_unlock_irqrestore(&cpcmd_lock, flags);
}
return len;
}
#include <linux/threads.h>
#include <linux/kexec.h>
+#include <linux/reboot.h>
void machine_crash_shutdown(struct pt_regs *regs)
{
NULL
};
-struct debug_view debug_level_view = {
+static struct debug_view debug_level_view = {
"level",
&debug_prolog_level_fn,
NULL,
NULL
};
-struct debug_view debug_pages_view = {
+static struct debug_view debug_pages_view = {
"pages",
&debug_prolog_pages_fn,
NULL,
NULL
};
-struct debug_view debug_flush_view = {
+static struct debug_view debug_flush_view = {
"flush",
NULL,
NULL,
NULL
};
-
+/* used by dump analysis tools to determine version of debug feature */
unsigned int debug_feature_version = __DEBUG_FEATURE_VERSION;
/* static globals */
static debug_info_t *debug_area_first = NULL;
static debug_info_t *debug_area_last = NULL;
-DECLARE_MUTEX(debug_lock);
+static DECLARE_MUTEX(debug_lock);
static int initialized;
{ .ctl_name = 0 }
};
-struct ctl_table_header *s390dbf_sysctl_header;
+static struct ctl_table_header *s390dbf_sysctl_header;
void
debug_stop_all(void)
* flushes debug areas
*/
-void
-debug_flush(debug_info_t* id, int area)
+static void debug_flush(debug_info_t* id, int area)
{
unsigned long flags;
int i,j;
/*
* clean up module
*/
-void
-__exit debug_exit(void)
+static void __exit debug_exit(void)
{
debugfs_remove(debug_debugfs_root_entry);
unregister_sysctl_table(s390dbf_sysctl_header);
--- /dev/null
+/*
+ * arch/s390/kernel/early.c
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Hongjie Yang <hongjie@us.ibm.com>,
+ * Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/ctype.h>
+#include <linux/lockdep.h>
+#include <linux/module.h>
+#include <linux/pfn.h>
+#include <linux/uaccess.h>
+#include <asm/lowcore.h>
+#include <asm/processor.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cpcmd.h>
+#include <asm/sclp.h>
+
+/*
+ * Create a Kernel NSS if the SAVESYS= parameter is defined
+ */
+#define DEFSYS_CMD_SIZE 96
+#define SAVESYS_CMD_SIZE 32
+
+char kernel_nss_name[NSS_NAME_SIZE + 1];
+
+#ifdef CONFIG_SHARED_KERNEL
+static noinline __init void create_kernel_nss(void)
+{
+ unsigned int i, stext_pfn, eshared_pfn, end_pfn, min_size;
+#ifdef CONFIG_BLK_DEV_INITRD
+ unsigned int sinitrd_pfn, einitrd_pfn;
+#endif
+ int response;
+ char *savesys_ptr;
+ char upper_command_line[COMMAND_LINE_SIZE];
+ char defsys_cmd[DEFSYS_CMD_SIZE];
+ char savesys_cmd[SAVESYS_CMD_SIZE];
+
+ /* Do nothing if we are not running under VM */
+ if (!MACHINE_IS_VM)
+ return;
+
+ /* Convert COMMAND_LINE to upper case */
+ for (i = 0; i < strlen(COMMAND_LINE); i++)
+ upper_command_line[i] = toupper(COMMAND_LINE[i]);
+
+ savesys_ptr = strstr(upper_command_line, "SAVESYS=");
+
+ if (!savesys_ptr)
+ return;
+
+ savesys_ptr += 8; /* Point to the beginning of the NSS name */
+ for (i = 0; i < NSS_NAME_SIZE; i++) {
+ if (savesys_ptr[i] == ' ' || savesys_ptr[i] == '\0')
+ break;
+ kernel_nss_name[i] = savesys_ptr[i];
+ }
+
+ stext_pfn = PFN_DOWN(__pa(&_stext));
+ eshared_pfn = PFN_DOWN(__pa(&_eshared));
+ end_pfn = PFN_UP(__pa(&_end));
+ min_size = end_pfn << 2;
+
+ sprintf(defsys_cmd, "DEFSYS %s 00000-%.5X EW %.5X-%.5X SR %.5X-%.5X",
+ kernel_nss_name, stext_pfn - 1, stext_pfn, eshared_pfn - 1,
+ eshared_pfn, end_pfn);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (INITRD_START && INITRD_SIZE) {
+ sinitrd_pfn = PFN_DOWN(__pa(INITRD_START));
+ einitrd_pfn = PFN_UP(__pa(INITRD_START + INITRD_SIZE));
+ min_size = einitrd_pfn << 2;
+ sprintf(defsys_cmd, "%s EW %.5X-%.5X", defsys_cmd,
+ sinitrd_pfn, einitrd_pfn);
+ }
+#endif
+
+ sprintf(defsys_cmd, "%s EW MINSIZE=%.7iK", defsys_cmd, min_size);
+ sprintf(savesys_cmd, "SAVESYS %s \n IPL %s",
+ kernel_nss_name, kernel_nss_name);
+
+ __cpcmd(defsys_cmd, NULL, 0, &response);
+
+ if (response != 0)
+ return;
+
+ __cpcmd(savesys_cmd, NULL, 0, &response);
+
+ if (response != strlen(savesys_cmd))
+ return;
+
+ ipl_flags = IPL_NSS_VALID;
+}
+
+#else /* CONFIG_SHARED_KERNEL */
+
+static inline void create_kernel_nss(void) { }
+
+#endif /* CONFIG_SHARED_KERNEL */
+
+/*
+ * Clear bss memory
+ */
+static noinline __init void clear_bss_section(void)
+{
+ memset(__bss_start, 0, _end - __bss_start);
+}
+
+/*
+ * Initialize storage key for kernel pages
+ */
+static noinline __init void init_kernel_storage_key(void)
+{
+ unsigned long end_pfn, init_pfn;
+
+ end_pfn = PFN_UP(__pa(&_end));
+
+ for (init_pfn = 0 ; init_pfn < end_pfn; init_pfn++)
+ page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY);
+}
+
+static noinline __init void detect_machine_type(void)
+{
+ struct cpuinfo_S390 *cpuinfo = &S390_lowcore.cpu_data;
+
+ asm volatile("stidp %0" : "=m" (S390_lowcore.cpu_data.cpu_id));
+
+ /* Running under z/VM ? */
+ if (cpuinfo->cpu_id.version == 0xff)
+ machine_flags |= 1;
+
+ /* Running on a P/390 ? */
+ if (cpuinfo->cpu_id.machine == 0x7490)
+ machine_flags |= 4;
+}
+
+static noinline __init int memory_fast_detect(void)
+{
+
+ unsigned long val0 = 0;
+ unsigned long val1 = 0xc;
+ int ret = -ENOSYS;
+
+ if (ipl_flags & IPL_NSS_VALID)
+ return -ENOSYS;
+
+ asm volatile(
+ " diag %1,%2,0x260\n"
+ "0: lhi %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+d" (ret), "+d" (val0), "+d" (val1) : : "cc");
+
+ if (ret || val0 != val1)
+ return -ENOSYS;
+
+ memory_chunk[0].size = val0;
+ return 0;
+}
+
+#define ADDR2G (1UL << 31)
+
+static noinline __init unsigned long sclp_memory_detect(void)
+{
+ struct sclp_readinfo_sccb *sccb;
+ unsigned long long memsize;
+
+ sccb = &s390_readinfo_sccb;
+
+ if (sccb->header.response_code != 0x10)
+ return 0;
+
+ if (sccb->rnsize)
+ memsize = sccb->rnsize << 20;
+ else
+ memsize = sccb->rnsize2 << 20;
+ if (sccb->rnmax)
+ memsize *= sccb->rnmax;
+ else
+ memsize *= sccb->rnmax2;
+#ifndef CONFIG_64BIT
+ /*
+ * Can't deal with more than 2G in 31 bit addressing mode, so
+ * limit the value in order to avoid strange side effects.
+ */
+ if (memsize > ADDR2G)
+ memsize = ADDR2G;
+#endif
+ return (unsigned long) memsize;
+}
+
+static inline __init unsigned long __tprot(unsigned long addr)
+{
+ int cc = -1;
+
+ asm volatile(
+ " tprot 0(%1),0\n"
+ "0: ipm %0\n"
+ " srl %0,28\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+d" (cc) : "a" (addr) : "cc");
+ return (unsigned long)cc;
+}
+
+/* Checking memory in 128KB increments. */
+#define CHUNK_INCR (1UL << 17)
+
+static noinline __init void find_memory_chunks(unsigned long memsize)
+{
+ unsigned long addr = 0, old_addr = 0;
+ unsigned long old_cc = CHUNK_READ_WRITE;
+ unsigned long cc;
+ int chunk = 0;
+
+ while (chunk < MEMORY_CHUNKS) {
+ cc = __tprot(addr);
+ while (cc == old_cc) {
+ addr += CHUNK_INCR;
+ cc = __tprot(addr);
+#ifndef CONFIG_64BIT
+ if (addr == ADDR2G)
+ break;
+#endif
+ }
+
+ if (old_addr != addr &&
+ (old_cc == CHUNK_READ_WRITE || old_cc == CHUNK_READ_ONLY)) {
+ memory_chunk[chunk].addr = old_addr;
+ memory_chunk[chunk].size = addr - old_addr;
+ memory_chunk[chunk].type = old_cc;
+ chunk++;
+ }
+
+ old_addr = addr;
+ old_cc = cc;
+
+#ifndef CONFIG_64BIT
+ if (addr == ADDR2G)
+ break;
+#endif
+ /*
+ * Finish memory detection at the first hole, unless
+ * - we reached the hsa -> skip it.
+ * - we know there must be more.
+ */
+ if (cc == -1UL && !memsize && old_addr != ADDR2G)
+ break;
+ if (memsize && addr >= memsize)
+ break;
+ }
+}
+
+static __init void early_pgm_check_handler(void)
+{
+ unsigned long addr;
+ const struct exception_table_entry *fixup;
+
+ addr = S390_lowcore.program_old_psw.addr;
+ fixup = search_exception_tables(addr & PSW_ADDR_INSN);
+ if (!fixup)
+ disabled_wait(0);
+ S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
+}
+
+static noinline __init void setup_lowcore_early(void)
+{
+ psw_t psw;
+
+ psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
+ psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_ext_handler;
+ S390_lowcore.external_new_psw = psw;
+ psw.addr = PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
+ S390_lowcore.program_new_psw = psw;
+ s390_base_pgm_handler_fn = early_pgm_check_handler;
+}
+
+/*
+ * Save ipl parameters, clear bss memory, initialize storage keys
+ * and create a kernel NSS at startup if the SAVESYS= parm is defined
+ */
+void __init startup_init(void)
+{
+ unsigned long memsize;
+
+ ipl_save_parameters();
+ clear_bss_section();
+ init_kernel_storage_key();
+ lockdep_init();
+ lockdep_off();
+ detect_machine_type();
+ create_kernel_nss();
+ sort_main_extable();
+ setup_lowcore_early();
+ sclp_readinfo_early();
+ memsize = sclp_memory_detect();
+ if (memory_fast_detect() < 0)
+ find_memory_chunks(memsize);
+ lockdep_on();
+}
#include <linux/module.h>
#include <asm/types.h>
+#include <asm/ebcdic.h>
/*
* ASCII (IBM PC 437) -> EBCDIC 037
st %r15,__LC_KERNEL_STACK # set end of kernel stack
ahi %r15,-96
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
- l %r14,.Lipl_save_parameters-.LPG1(%r13)
- basr %r14,%r14
#
-# clear bss memory
+# Save ipl parameters, clear bss memory, initialize storage key for kernel pages,
+# and create a kernel NSS if the SAVESYS= parm is defined
#
- l %r2,.Lbss_bgn-.LPG1(%r13) # start of bss
- l %r3,.Lbss_end-.LPG1(%r13) # end of bss
- sr %r3,%r2 # length of bss
- sr %r4,%r4
- sr %r5,%r5 # set src,length and pad to zero
- sr %r0,%r0
- mvcle %r2,%r4,0 # clear mem
- jo .-4 # branch back, if not finish
-
- l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
-.Lservicecall:
- stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
-
- stctl %r0, %r0,.Lcr-.LPG1(%r13) # get cr0
- la %r1,0x200 # set bit 22
- o %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
- st %r1,.Lcr-.LPG1(%r13)
- lctl %r0, %r0,.Lcr-.LPG1(%r13) # load modified cr0
-
- mvc __LC_EXT_NEW_PSW(8),.Lpcext-.LPG1(%r13) # set postcall psw
- la %r1, .Lsclph-.LPG1(%r13)
- a %r1,__LC_EXT_NEW_PSW+4 # set handler
- st %r1,__LC_EXT_NEW_PSW+4
-
- l %r4,.Lsccbaddr-.LPG1(%r13) # %r4 is our index for sccb stuff
- lr %r1,%r4 # our sccb
- .insn rre,0xb2200000,%r2,%r1 # service call
- ipm %r1
- srl %r1,28 # get cc code
- xr %r3, %r3
- chi %r1,3
- be .Lfchunk-.LPG1(%r13) # leave
- chi %r1,2
- be .Lservicecall-.LPG1(%r13)
- lpsw .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
- lh %r1,.Lsccbr-.Lsccb(%r4)
- chi %r1,0x10 # 0x0010 is the sucess code
- je .Lprocsccb # let's process the sccb
- chi %r1,0x1f0
- bne .Lfchunk-.LPG1(%r13) # unhandled error code
- c %r2, .Lrcp-.LPG1(%r13) # Did we try Read SCP forced
- bne .Lfchunk-.LPG1(%r13) # if no, give up
- l %r2, .Lrcp2-.LPG1(%r13) # try with Read SCP
- b .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
- lhi %r1,0
- icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
- jnz .Lscnd
- lhi %r1,0x800 # otherwise report 2GB
-.Lscnd:
- lhi %r3,0x800 # limit reported memory size to 2GB
- cr %r1,%r3
- jl .Lno2gb
- lr %r1,%r3
-.Lno2gb:
- xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-.Lsccb(%r4)
- chi %r3,0x00
- jne .Lcompmem
- l %r3,.Lscpa2-.Lsccb(%r4)
-.Lcompmem:
- mr %r2,%r1 # mem in MB on 128-bit
- l %r1,.Lonemb-.LPG1(%r13)
- mr %r2,%r1 # mem size in bytes in %r3
- b .Lfchunk-.LPG1(%r13)
-
- .align 4
-.Lipl_save_parameters:
- .long ipl_save_parameters
-.Linittu:
- .long init_thread_union
-.Lpmask:
- .byte 0
- .align 8
-.Lpcext:.long 0x00080000,0x80000000
-.Lcr:
- .long 0x00 # place holder for cr0
- .align 8
-.Lwaitsclp:
- .long 0x010a0000,0x80000000 + .Lsclph
-.Lrcp:
- .int 0x00120001 # Read SCP forced code
-.Lrcp2:
- .int 0x00020001 # Read SCP code
-.Lonemb:
- .int 0x100000
-.Lfchunk:
+ l %r14,.Lstartup_init-.LPG1(%r13)
+ basr %r14,%r14
-#
-# find memory chunks.
-#
- lr %r9,%r3 # end of mem
- mvc __LC_PGM_NEW_PSW(8),.Lpcmem-.LPG1(%r13)
- la %r1,1 # test in increments of 128KB
- sll %r1,17
- l %r3,.Lmchunk-.LPG1(%r13) # get pointer to memory_chunk array
- slr %r4,%r4 # set start of chunk to zero
- slr %r5,%r5 # set end of chunk to zero
- slr %r6,%r6 # set access code to zero
- la %r10,MEMORY_CHUNKS # number of chunks
-.Lloop:
- tprot 0(%r5),0 # test protection of first byte
- ipm %r7
- srl %r7,28
- clr %r6,%r7 # compare cc with last access code
- be .Lsame-.LPG1(%r13)
- lhi %r8,0 # no program checks
- b .Lsavchk-.LPG1(%r13)
-.Lsame:
- ar %r5,%r1 # add 128KB to end of chunk
- bno .Lloop-.LPG1(%r13) # r1 < 0x80000000 -> loop
-.Lchkmem: # > 2GB or tprot got a program check
- lhi %r8,1 # set program check flag
-.Lsavchk:
- clr %r4,%r5 # chunk size > 0?
- be .Lchkloop-.LPG1(%r13)
- st %r4,0(%r3) # store start address of chunk
- lr %r0,%r5
- slr %r0,%r4
- st %r0,4(%r3) # store size of chunk
- st %r6,8(%r3) # store type of chunk
- la %r3,12(%r3)
- ahi %r10,-1 # update chunk number
-.Lchkloop:
- lr %r6,%r7 # set access code to last cc
- # we got an exception or we're starting a new
- # chunk , we must check if we should
- # still try to find valid memory (if we detected
- # the amount of available storage), and if we
- # have chunks left
- xr %r0,%r0
- clr %r0,%r9 # did we detect memory?
- je .Ldonemem # if not, leave
- chi %r10,0 # do we have chunks left?
- je .Ldonemem
- chi %r8,1 # program check ?
- je .Lpgmchk
- lr %r4,%r5 # potential new chunk
- alr %r5,%r1 # add 128KB to end of chunk
- j .Llpcnt
-.Lpgmchk:
- alr %r5,%r1 # add 128KB to end of chunk
- lr %r4,%r5 # potential new chunk
-.Llpcnt:
- clr %r5,%r9 # should we go on?
- jl .Lloop
-.Ldonemem:
l %r12,.Lmflags-.LPG1(%r13) # get address of machine_flags
-#
-# find out if we are running under VM
-#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running under VM ?
- bno .Lnovm-.LPG1(%r13)
- oi 3(%r12),1 # set VM flag
-.Lnovm:
- lh %r0,__LC_CPUID+4 # get cpu version
- chi %r0,0x7490 # running on a P/390 ?
- bne .Lnop390-.LPG1(%r13)
- oi 3(%r12),4 # set P/390 flag
-.Lnop390:
-
#
# find out if we have an IEEE fpu
#
.long 0 # cr15: linkage stack operations
.Lduct: .long 0,0,0,0,0,0,0,0
.long 0,0,0,0,0,0,0,0
-.Lpcmem:.long 0x00080000,0x80000000 + .Lchkmem
.Lpcfpu:.long 0x00080000,0x80000000 + .Lchkfpu
.Lpccsp:.long 0x00080000,0x80000000 + .Lchkcsp
.Lpcmvpg:.long 0x00080000,0x80000000 + .Lchkmvpg
.Lbss_bgn: .long __bss_start
.Lbss_end: .long _end
.Lparmaddr: .long PARMAREA
-.Lsccbaddr: .long .Lsccb
+.Linittu: .long init_thread_union
+.Lstartup_init:
+ .long startup_init
.globl ipl_schib
ipl_schib:
.word 0
.org 0x12000
-.globl s390_readinfo_sccb
-s390_readinfo_sccb:
-.Lsccb:
- .hword 0x1000 # length, one page
- .byte 0x00,0x00,0x00
- .byte 0x80 # variable response bit set
-.Lsccbr:
- .hword 0x00 # response code
-.Lscpincr1:
- .hword 0x00
-.Lscpa1:
- .byte 0x00
- .fill 89,1,0
-.Lscpa2:
- .int 0x00
-.Lscpincr2:
- .quad 0x00
- .fill 3984,1,0
- .org 0x13000
-
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#endif
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
aghi %r15,-160
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
-
- brasl %r14,ipl_save_parameters
#
-# clear bss memory
+# Save ipl parameters, clear bss memory, initialize storage key for kernel pages,
+# and create a kernel NSS if the SAVESYS= parm is defined
#
- larl %r2,__bss_start # start of bss segment
- larl %r3,_end # end of bss segment
- sgr %r3,%r2 # length of bss
- sgr %r4,%r4 #
- sgr %r5,%r5 # set src,length and pad to zero
- mvcle %r2,%r4,0 # clear mem
- jo .-4 # branch back, if not finish
+ brasl %r14,startup_init
# set program check new psw mask
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
- larl %r1,.Lslowmemdetect # set program check address
- stg %r1,__LC_PGM_NEW_PSW+8
- lghi %r1,0xc
- diag %r0,%r1,0x260 # get memory size of virtual machine
- cgr %r0,%r1 # different? -> old detection routine
- jne .Lslowmemdetect
- aghi %r1,1 # size is one more than end
- larl %r2,memory_chunk
- stg %r1,8(%r2) # store size of chunk
- j .Ldonemem
-
-.Lslowmemdetect:
- l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
-.Lservicecall:
- stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
-
- stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0
- la %r1,0x200 # set bit 22
- og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
- stg %r1,.Lcr-.LPG1(%r13)
- lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0
-
- mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
- larl %r1,.Lsclph
- stg %r1,__LC_EXT_NEW_PSW+8 # set handler
-
- larl %r4,.Lsccb # %r4 is our index for sccb stuff
- lgr %r1,%r4 # our sccb
- .insn rre,0xb2200000,%r2,%r1 # service call
- ipm %r1
- srl %r1,28 # get cc code
- xr %r3,%r3
- chi %r1,3
- be .Lfchunk-.LPG1(%r13) # leave
- chi %r1,2
- be .Lservicecall-.LPG1(%r13)
- lpswe .Lwaitsclp-.LPG1(%r13)
-.Lsclph:
- lh %r1,.Lsccbr-.Lsccb(%r4)
- chi %r1,0x10 # 0x0010 is the sucess code
- je .Lprocsccb # let's process the sccb
- chi %r1,0x1f0
- bne .Lfchunk-.LPG1(%r13) # unhandled error code
- c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced
- bne .Lfchunk-.LPG1(%r13) # if no, give up
- l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP
- b .Lservicecall-.LPG1(%r13)
-.Lprocsccb:
- lghi %r1,0
- icm %r1,3,.Lscpincr1-.Lsccb(%r4) # use this one if != 0
- jnz .Lscnd
- lg %r1,.Lscpincr2-.Lsccb(%r4) # otherwise use this one
-.Lscnd:
- xr %r3,%r3 # same logic
- ic %r3,.Lscpa1-.Lsccb(%r4)
- chi %r3,0x00
- jne .Lcompmem
- l %r3,.Lscpa2-.Lsccb(%r4)
-.Lcompmem:
- mlgr %r2,%r1 # mem in MB on 128-bit
- l %r1,.Lonemb-.LPG1(%r13)
- mlgr %r2,%r1 # mem size in bytes in %r3
- b .Lfchunk-.LPG1(%r13)
-
- .align 4
-.Lpmask:
- .byte 0
- .align 8
-.Lcr:
- .quad 0x00 # place holder for cr0
-.Lwaitsclp:
- .quad 0x0102000180000000,.Lsclph
-.Lrcp:
- .int 0x00120001 # Read SCP forced code
-.Lrcp2:
- .int 0x00020001 # Read SCP code
-.Lonemb:
- .int 0x100000
-
-.Lfchunk:
-
-#
-# find memory chunks.
-#
- lgr %r9,%r3 # end of mem
- larl %r1,.Lchkmem # set program check address
- stg %r1,__LC_PGM_NEW_PSW+8
- la %r1,1 # test in increments of 128KB
- sllg %r1,%r1,17
- larl %r3,memory_chunk
- slgr %r4,%r4 # set start of chunk to zero
- slgr %r5,%r5 # set end of chunk to zero
- slr %r6,%r6 # set access code to zero
- la %r10,MEMORY_CHUNKS # number of chunks
-.Lloop:
- tprot 0(%r5),0 # test protection of first byte
- ipm %r7
- srl %r7,28
- clr %r6,%r7 # compare cc with last access code
- je .Lsame
- lghi %r8,0 # no program checks
- j .Lsavchk
-.Lsame:
- algr %r5,%r1 # add 128KB to end of chunk
- # no need to check here,
- brc 12,.Lloop # this is the same chunk
-.Lchkmem: # > 16EB or tprot got a program check
- lghi %r8,1 # set program check flag
-.Lsavchk:
- clgr %r4,%r5 # chunk size > 0?
- je .Lchkloop
- stg %r4,0(%r3) # store start address of chunk
- lgr %r0,%r5
- slgr %r0,%r4
- stg %r0,8(%r3) # store size of chunk
- st %r6,20(%r3) # store type of chunk
- la %r3,24(%r3)
- ahi %r10,-1 # update chunk number
-.Lchkloop:
- lr %r6,%r7 # set access code to last cc
- # we got an exception or we're starting a new
- # chunk , we must check if we should
- # still try to find valid memory (if we detected
- # the amount of available storage), and if we
- # have chunks left
- lghi %r4,1
- sllg %r4,%r4,31
- clgr %r5,%r4
- je .Lhsaskip
- xr %r0, %r0
- clgr %r0, %r9 # did we detect memory?
- je .Ldonemem # if not, leave
- chi %r10, 0 # do we have chunks left?
- je .Ldonemem
-.Lhsaskip:
- chi %r8,1 # program check ?
- je .Lpgmchk
- lgr %r4,%r5 # potential new chunk
- algr %r5,%r1 # add 128KB to end of chunk
- j .Llpcnt
-.Lpgmchk:
- algr %r5,%r1 # add 128KB to end of chunk
- lgr %r4,%r5 # potential new chunk
-.Llpcnt:
- clgr %r5,%r9 # should we go on?
- jl .Lloop
-.Ldonemem:
-
larl %r12,machine_flags
-#
-# find out if we are running under VM
-#
- stidp __LC_CPUID # store cpuid
- tm __LC_CPUID,0xff # running under VM ?
- bno 0f-.LPG1(%r13)
- oi 7(%r12),1 # set VM flag
-0: lh %r0,__LC_CPUID+4 # get cpu version
- chi %r0,0x7490 # running on a P/390 ?
- bne 1f-.LPG1(%r13)
- oi 7(%r12),4 # set P/390 flag
-1:
-
#
# find out if we have the MVPG instruction
#
.word 0
.org 0x12000
-.globl s390_readinfo_sccb
-s390_readinfo_sccb:
-.Lsccb:
- .hword 0x1000 # length, one page
- .byte 0x00,0x00,0x00
- .byte 0x80 # variable response bit set
-.Lsccbr:
- .hword 0x00 # response code
-.Lscpincr1:
- .hword 0x00
-.Lscpa1:
- .byte 0x00
- .fill 89,1,0
-.Lscpa2:
- .int 0x00
-.Lscpincr2:
- .quad 0x00
- .fill 3984,1,0
- .org 0x13000
#ifdef CONFIG_SHARED_KERNEL
.org 0x100000
#include <asm/cio.h>
#include <asm/ebcdic.h>
#include <asm/reset.h>
+#include <asm/sclp.h>
#define IPL_PARM_BLOCK_VERSION 0
-#define LOADPARM_LEN 8
-extern char s390_readinfo_sccb[];
-#define SCCB_VALID (*((__u16*)&s390_readinfo_sccb[6]) == 0x0010)
-#define SCCB_LOADPARM (&s390_readinfo_sccb[24])
-#define SCCB_FLAG (s390_readinfo_sccb[91])
+#define SCCB_VALID (s390_readinfo_sccb.header.response_code == 0x10)
+#define SCCB_LOADPARM (&s390_readinfo_sccb.loadparm)
+#define SCCB_FLAG (s390_readinfo_sccb.flags)
enum ipl_type {
IPL_TYPE_NONE = 1,
IPL_TYPE_UNKNOWN = 2,
IPL_TYPE_CCW = 4,
IPL_TYPE_FCP = 8,
+ IPL_TYPE_NSS = 16,
};
#define IPL_NONE_STR "none"
#define IPL_UNKNOWN_STR "unknown"
#define IPL_CCW_STR "ccw"
#define IPL_FCP_STR "fcp"
+#define IPL_NSS_STR "nss"
static char *ipl_type_str(enum ipl_type type)
{
return IPL_CCW_STR;
case IPL_TYPE_FCP:
return IPL_FCP_STR;
+ case IPL_TYPE_NSS:
+ return IPL_NSS_STR;
case IPL_TYPE_UNKNOWN:
default:
return IPL_UNKNOWN_STR;
IPL_METHOD_FCP_RO_DIAG,
IPL_METHOD_FCP_RW_DIAG,
IPL_METHOD_FCP_RO_VM,
+ IPL_METHOD_NSS,
};
enum shutdown_action {
static int diag308_set_works = 0;
static int reipl_capabilities = IPL_TYPE_UNKNOWN;
+
static enum ipl_type reipl_type = IPL_TYPE_UNKNOWN;
static enum ipl_method reipl_method = IPL_METHOD_NONE;
static struct ipl_parameter_block *reipl_block_fcp;
static struct ipl_parameter_block *reipl_block_ccw;
+static char reipl_nss_name[NSS_NAME_SIZE + 1];
+
static int dump_capabilities = IPL_TYPE_NONE;
static enum ipl_type dump_type = IPL_TYPE_NONE;
static enum ipl_method dump_method = IPL_METHOD_NONE;
sys_##_prefix##_##_name##_show, \
sys_##_prefix##_##_name##_store);
+#define DEFINE_IPL_ATTR_STR_RW(_prefix, _name, _fmt_out, _fmt_in, _value)\
+static ssize_t sys_##_prefix##_##_name##_show(struct subsystem *subsys, \
+ char *page) \
+{ \
+ return sprintf(page, _fmt_out, _value); \
+} \
+static ssize_t sys_##_prefix##_##_name##_store(struct subsystem *subsys,\
+ const char *buf, size_t len) \
+{ \
+ if (sscanf(buf, _fmt_in, _value) != 1) \
+ return -EINVAL; \
+ return len; \
+} \
+static struct subsys_attribute sys_##_prefix##_##_name##_attr = \
+ __ATTR(_name,(S_IRUGO | S_IWUSR), \
+ sys_##_prefix##_##_name##_show, \
+ sys_##_prefix##_##_name##_store);
+
static void make_attrs_ro(struct attribute **attrs)
{
while (*attrs) {
{
struct ipl_parameter_block *ipl = IPL_PARMBLOCK_START;
+ if (ipl_flags & IPL_NSS_VALID)
+ return IPL_TYPE_NSS;
if (!(ipl_flags & IPL_DEVNO_VALID))
return IPL_TYPE_UNKNOWN;
if (!(ipl_flags & IPL_PARMBLOCK_VALID))
.attrs = ipl_ccw_attrs,
};
+/* NSS ipl device attributes */
+
+DEFINE_IPL_ATTR_RO(ipl_nss, name, "%s\n", kernel_nss_name);
+
+static struct attribute *ipl_nss_attrs[] = {
+ &sys_ipl_type_attr.attr,
+ &sys_ipl_nss_name_attr.attr,
+ NULL,
+};
+
+static struct attribute_group ipl_nss_attr_group = {
+ .attrs = ipl_nss_attrs,
+};
+
/* UNKNOWN ipl device attributes */
static struct attribute *ipl_unknown_attrs[] = {
.attrs = reipl_ccw_attrs,
};
+
+/* NSS reipl device attributes */
+
+DEFINE_IPL_ATTR_STR_RW(reipl_nss, name, "%s\n", "%s\n", reipl_nss_name);
+
+static struct attribute *reipl_nss_attrs[] = {
+ &sys_reipl_nss_name_attr.attr,
+ NULL,
+};
+
+static struct attribute_group reipl_nss_attr_group = {
+ .name = IPL_NSS_STR,
+ .attrs = reipl_nss_attrs,
+};
+
/* reipl type */
static int reipl_set_type(enum ipl_type type)
else
reipl_method = IPL_METHOD_FCP_RO_DIAG;
break;
+ case IPL_TYPE_NSS:
+ reipl_method = IPL_METHOD_NSS;
+ break;
default:
reipl_method = IPL_METHOD_NONE;
}
rc = reipl_set_type(IPL_TYPE_CCW);
else if (strncmp(buf, IPL_FCP_STR, strlen(IPL_FCP_STR)) == 0)
rc = reipl_set_type(IPL_TYPE_FCP);
+ else if (strncmp(buf, IPL_NSS_STR, strlen(IPL_NSS_STR)) == 0)
+ rc = reipl_set_type(IPL_TYPE_NSS);
return (rc != 0) ? rc : len;
}
case IPL_METHOD_FCP_RO_VM:
__cpcmd("IPL", NULL, 0, NULL);
break;
+ case IPL_METHOD_NSS:
+ sprintf(buf, "IPL %s", reipl_nss_name);
+ __cpcmd(buf, NULL, 0, NULL);
+ break;
case IPL_METHOD_NONE:
default:
if (MACHINE_IS_VM)
case IPL_TYPE_FCP:
rc = ipl_register_fcp_files();
break;
+ case IPL_TYPE_NSS:
+ rc = sysfs_create_group(&ipl_subsys.kset.kobj,
+ &ipl_nss_attr_group);
+ break;
default:
rc = sysfs_create_group(&ipl_subsys.kset.kobj,
&ipl_unknown_attr_group);
free_page((unsigned long)buffer);
}
+static int __init reipl_nss_init(void)
+{
+ int rc;
+
+ if (!MACHINE_IS_VM)
+ return 0;
+ rc = sysfs_create_group(&reipl_subsys.kset.kobj, &reipl_nss_attr_group);
+ if (rc)
+ return rc;
+ strncpy(reipl_nss_name, kernel_nss_name, NSS_NAME_SIZE + 1);
+ reipl_capabilities |= IPL_TYPE_NSS;
+ return 0;
+}
+
static int __init reipl_ccw_init(void)
{
int rc;
if (rc)
return rc;
rc = reipl_fcp_init();
+ if (rc)
+ return rc;
+ rc = reipl_nss_init();
if (rc)
return rc;
rc = reipl_set_type(ipl_get_type());
reset->fn();
}
-extern void reset_mcck_handler(void);
-extern void reset_pgm_handler(void);
extern __u32 dump_prefix_page;
void s390_reset_system(void)
__ctl_clear_bit(0,28);
/* Set new machine check handler */
- S390_lowcore.mcck_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK;
+ S390_lowcore.mcck_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
S390_lowcore.mcck_new_psw.addr =
- PSW_ADDR_AMODE | (unsigned long) &reset_mcck_handler;
+ PSW_ADDR_AMODE | (unsigned long) s390_base_mcck_handler;
/* Set new program check handler */
- S390_lowcore.program_new_psw.mask = PSW_KERNEL_BITS & ~PSW_MASK_MCHECK;
+ S390_lowcore.program_new_psw.mask = psw_kernel_bits & ~PSW_MASK_MCHECK;
S390_lowcore.program_new_psw.addr =
- PSW_ADDR_AMODE | (unsigned long) &reset_pgm_handler;
+ PSW_ADDR_AMODE | (unsigned long) s390_base_pgm_handler;
do_reset_calls();
}
/*
* arch/s390/kernel/irq.c
*
- * S390 version
- * Copyright (C) 2004 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2004,2007
* Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com),
+ * Thomas Spatzier (tspat@de.ibm.com)
*
* This file contains interrupt related functions.
*/
#include <linux/interrupt.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
+#include <linux/proc_fs.h>
+#include <linux/profile.h>
/*
* show_interrupts is needed by /proc/interrupts.
local_irq_restore(flags);
}
-
EXPORT_SYMBOL(do_softirq);
+
+void init_irq_proc(void)
+{
+ struct proc_dir_entry *root_irq_dir;
+
+ root_irq_dir = proc_mkdir("irq", NULL);
+ create_prof_cpu_mask(root_irq_dir);
+}
static int __kprobes swap_instruction(void *aref)
{
struct ins_replace_args *args = aref;
+ u32 *addr;
+ u32 instr;
int err = -EFAULT;
+ /*
+ * Text segment is read-only, hence we use stura to bypass dynamic
+ * address translation to exchange the instruction. Since stura
+ * always operates on four bytes, but we only want to exchange two
+ * bytes do some calculations to get things right. In addition we
+ * shall not cross any page boundaries (vmalloc area!) when writing
+ * the new instruction.
+ */
+ addr = (u32 *)ALIGN((unsigned long)args->ptr, 4);
+ if ((unsigned long)args->ptr & 2)
+ instr = ((*addr) & 0xffff0000) | args->new;
+ else
+ instr = ((*addr) & 0x0000ffff) | args->new << 16;
+
asm volatile(
- "0: mvc 0(2,%2),0(%3)\n"
- "1: la %0,0\n"
+ " lra %1,0(%1)\n"
+ "0: stura %2,%1\n"
+ "1: la %0,0\n"
"2:\n"
EX_TABLE(0b,2b)
- : "+d" (err), "=m" (*args->ptr)
- : "a" (args->ptr), "a" (&args->new), "m" (args->new));
+ : "+d" (err)
+ : "a" (addr), "d" (instr)
+ : "memory", "cc");
+
return err;
}
* - When the probed function returns, this probe
* causes the handlers to fire
*/
-void __kprobes kretprobe_trampoline_holder(void)
+void kretprobe_trampoline_holder(void)
{
asm volatile(".global kretprobe_trampoline\n"
"kretprobe_trampoline: bcr 0,0\n");
/*
* Called when the probe at kretprobe trampoline is hit
*/
-int __kprobes trampoline_probe_handler(struct kprobe *p, struct pt_regs *regs)
+static int __kprobes trampoline_probe_handler(struct kprobe *p,
+ struct pt_regs *regs)
{
struct kretprobe_instance *ri = NULL;
struct hlist_head *head, empty_rp;
#include <linux/mm.h>
#include <linux/kexec.h>
#include <linux/delay.h>
+#include <linux/reboot.h>
#include <asm/cio.h>
#include <asm/setup.h>
#include <asm/pgtable.h>
#include <linux/fs.h>
#include <linux/string.h>
#include <linux/kernel.h>
+#include <linux/moduleloader.h>
#if 0
#define DEBUGP printk
table entries. */
}
-static inline void
+static void
check_rela(Elf_Rela *rela, struct module *me)
{
struct mod_arch_syminfo *info;
return -ENOEXEC;
}
-static inline int
+static int
apply_rela(Elf_Rela *rela, Elf_Addr base, Elf_Sym *symtab,
struct module *me)
{
trace_hardirqs_on();
/* Wait for external, I/O or machine check interrupt. */
- __load_psw_mask(PSW_KERNEL_BITS | PSW_MASK_WAIT |
+ __load_psw_mask(psw_kernel_bits | PSW_MASK_WAIT |
PSW_MASK_IO | PSW_MASK_EXT);
}
struct pt_regs regs;
memset(®s, 0, sizeof(regs));
- regs.psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT;
+ regs.psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
regs.psw.addr = (unsigned long) kernel_thread_starter | PSW_ADDR_AMODE;
regs.gprs[9] = (unsigned long) fn;
regs.gprs[10] = (unsigned long) arg;
+++ /dev/null
-/*
- * arch/s390/kernel/profile.c
- *
- * Copyright (C) 2003 IBM Deutschland Entwicklung GmbH, IBM Corporation
- * Author(s): Thomas Spatzier (tspat@de.ibm.com)
- *
- */
-#include <linux/proc_fs.h>
-#include <linux/profile.h>
-
-static struct proc_dir_entry * root_irq_dir;
-
-void init_irq_proc(void)
-{
- /* create /proc/irq */
- root_irq_dir = proc_mkdir("irq", NULL);
-
- /* create /proc/irq/prof_cpu_mask */
- create_prof_cpu_mask(root_irq_dir);
-}
per_info->control_regs.bits.storage_alt_space_ctl = 0;
}
-void
-set_single_step(struct task_struct *task)
+static void set_single_step(struct task_struct *task)
{
task->thread.per_info.single_step = 1;
FixPerRegisters(task);
}
-void
-clear_single_step(struct task_struct *task)
+static void clear_single_step(struct task_struct *task)
{
task->thread.per_info.single_step = 0;
FixPerRegisters(task);
*/
if (addr == (addr_t) &dummy->regs.psw.mask &&
#ifdef CONFIG_COMPAT
- data != PSW_MASK_MERGE(PSW_USER32_BITS, data) &&
+ data != PSW_MASK_MERGE(psw_user32_bits, data) &&
#endif
- data != PSW_MASK_MERGE(PSW_USER_BITS, data))
+ data != PSW_MASK_MERGE(psw_user_bits, data))
/* Invalid psw mask. */
return -EINVAL;
#ifndef CONFIG_64BIT
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
return -EIO;
- return put_user(tmp, (unsigned long __user *) data);
+ return put_user(tmp, (unsigned long __force __user *) data);
case PTRACE_PEEKUSR:
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR_AREA:
case PTRACE_POKEUSR_AREA:
- if (copy_from_user(&parea, (void __user *) addr,
+ if (copy_from_user(&parea, (void __force __user *) addr,
sizeof(parea)))
return -EFAULT;
addr = parea.kernel_addr;
if (request == PTRACE_PEEKUSR_AREA)
ret = peek_user(child, addr, data);
else {
- addr_t tmp;
- if (get_user (tmp, (addr_t __user *) data))
+ addr_t utmp;
+ if (get_user(utmp,
+ (addr_t __force __user *) data))
return -EFAULT;
- ret = poke_user(child, addr, tmp);
+ ret = poke_user(child, addr, utmp);
}
if (ret)
return ret;
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Fake a 31 bit psw mask. */
tmp = (__u32)(task_pt_regs(child)->psw.mask >> 32);
- tmp = PSW32_MASK_MERGE(PSW32_USER_BITS, tmp);
+ tmp = PSW32_MASK_MERGE(psw32_user_bits, tmp);
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Fake a 31 bit psw address. */
tmp = (__u32) task_pt_regs(child)->psw.addr |
*/
if (addr == (addr_t) &dummy32->regs.psw.mask) {
/* Build a 64 bit psw mask from 31 bit mask. */
- if (tmp != PSW32_MASK_MERGE(PSW32_USER_BITS, tmp))
+ if (tmp != PSW32_MASK_MERGE(psw32_user_bits, tmp))
/* Invalid psw mask. */
return -EINVAL;
task_pt_regs(child)->psw.mask =
- PSW_MASK_MERGE(PSW_USER32_BITS, (__u64) tmp << 32);
+ PSW_MASK_MERGE(psw_user32_bits, (__u64) tmp << 32);
} else if (addr == (addr_t) &dummy32->regs.psw.addr) {
/* Build a 64 bit psw address from 31 bit address. */
task_pt_regs(child)->psw.addr =
copied = access_process_vm(child, addr, &tmp, sizeof(tmp), 0);
if (copied != sizeof(tmp))
return -EIO;
- return put_user(tmp, (unsigned int __user *) data);
+ return put_user(tmp, (unsigned int __force __user *) data);
case PTRACE_PEEKUSR:
/* read the word at location addr in the USER area. */
case PTRACE_PEEKUSR_AREA:
case PTRACE_POKEUSR_AREA:
- if (copy_from_user(&parea, (void __user *) addr,
+ if (copy_from_user(&parea, (void __force __user *) addr,
sizeof(parea)))
return -EFAULT;
addr = parea.kernel_addr;
if (request == PTRACE_PEEKUSR_AREA)
ret = peek_user_emu31(child, addr, data);
else {
- __u32 tmp;
- if (get_user (tmp, (__u32 __user *) data))
+ __u32 utmp;
+ if (get_user(utmp,
+ (__u32 __force __user *) data))
return -EFAULT;
- ret = poke_user_emu31(child, addr, tmp);
+ ret = poke_user_emu31(child, addr, utmp);
}
if (ret)
return ret;
return 0;
case PTRACE_GETEVENTMSG:
return put_user((__u32) child->ptrace_message,
- (unsigned int __user *) data);
+ (unsigned int __force __user *) data);
case PTRACE_GETSIGINFO:
if (child->last_siginfo == NULL)
return -EINVAL;
- return copy_siginfo_to_user32((compat_siginfo_t __user *) data,
+ return copy_siginfo_to_user32((compat_siginfo_t
+ __force __user *) data,
child->last_siginfo);
case PTRACE_SETSIGINFO:
if (child->last_siginfo == NULL)
return -EINVAL;
return copy_siginfo_from_user32(child->last_siginfo,
- (compat_siginfo_t __user *) data);
+ (compat_siginfo_t
+ __force __user *) data);
}
return ptrace_request(child, request, addr, data);
}
+++ /dev/null
-/*
- * arch/s390/kernel/reset.S
- *
- * Copyright (C) IBM Corp. 2006
- * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
- * Michael Holzheu <holzheu@de.ibm.com>
- */
-
-#include <asm/ptrace.h>
-#include <asm/lowcore.h>
-
-#ifdef CONFIG_64BIT
-
- .globl reset_mcck_handler
-reset_mcck_handler:
- basr %r13,0
-0: lg %r15,__LC_PANIC_STACK # load panic stack
- aghi %r15,-STACK_FRAME_OVERHEAD
- lg %r1,s390_reset_mcck_handler-0b(%r13)
- ltgr %r1,%r1
- jz 1f
- basr %r14,%r1
-1: la %r1,4095
- lmg %r0,%r15,__LC_GPREGS_SAVE_AREA-4095(%r1)
- lpswe __LC_MCK_OLD_PSW
-
- .globl s390_reset_mcck_handler
-s390_reset_mcck_handler:
- .quad 0
-
- .globl reset_pgm_handler
-reset_pgm_handler:
- stmg %r0,%r15,__LC_SAVE_AREA
- basr %r13,0
-0: lg %r15,__LC_PANIC_STACK # load panic stack
- aghi %r15,-STACK_FRAME_OVERHEAD
- lg %r1,s390_reset_pgm_handler-0b(%r13)
- ltgr %r1,%r1
- jz 1f
- basr %r14,%r1
- lmg %r0,%r15,__LC_SAVE_AREA
- lpswe __LC_PGM_OLD_PSW
-1: lpswe disabled_wait_psw-0b(%r13)
- .globl s390_reset_pgm_handler
-s390_reset_pgm_handler:
- .quad 0
- .align 8
-disabled_wait_psw:
- .quad 0x0002000180000000,0x0000000000000000 + reset_pgm_handler
-
-#else /* CONFIG_64BIT */
-
- .globl reset_mcck_handler
-reset_mcck_handler:
- basr %r13,0
-0: l %r15,__LC_PANIC_STACK # load panic stack
- ahi %r15,-STACK_FRAME_OVERHEAD
- l %r1,s390_reset_mcck_handler-0b(%r13)
- ltr %r1,%r1
- jz 1f
- basr %r14,%r1
-1: lm %r0,%r15,__LC_GPREGS_SAVE_AREA
- lpsw __LC_MCK_OLD_PSW
-
- .globl s390_reset_mcck_handler
-s390_reset_mcck_handler:
- .long 0
-
- .globl reset_pgm_handler
-reset_pgm_handler:
- stm %r0,%r15,__LC_SAVE_AREA
- basr %r13,0
-0: l %r15,__LC_PANIC_STACK # load panic stack
- ahi %r15,-STACK_FRAME_OVERHEAD
- l %r1,s390_reset_pgm_handler-0b(%r13)
- ltr %r1,%r1
- jz 1f
- basr %r14,%r1
- lm %r0,%r15,__LC_SAVE_AREA
- lpsw __LC_PGM_OLD_PSW
-
-1: lpsw disabled_wait_psw-0b(%r13)
- .globl s390_reset_pgm_handler
-s390_reset_pgm_handler:
- .long 0
-disabled_wait_psw:
- .align 8
- .long 0x000a0000,0x00000000 + reset_pgm_handler
-
-#endif /* CONFIG_64BIT */
* Make sure that the i/o interrupt did not "overtake"
* the last HZ timer interrupt.
*/
- account_ticks();
+ account_ticks(S390_lowcore.int_clock);
kstat_cpu(smp_processor_id()).irqs[EXTERNAL_INTERRUPT]++;
index = ext_hash(code);
for (p = ext_int_hash[index]; p; p = p->next) {
- if (likely(p->code == code)) {
- if (likely(p->handler))
- p->handler(code);
- }
+ if (likely(p->code == code))
+ p->handler(code);
}
irq_exit();
set_irq_regs(old_regs);
#include <linux/device.h>
#include <linux/notifier.h>
#include <linux/pfn.h>
+#include <linux/ctype.h>
+#include <linux/reboot.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/page.h>
#include <asm/ptrace.h>
#include <asm/sections.h>
+#include <asm/ebcdic.h>
+#include <asm/compat.h>
+
+long psw_kernel_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY |
+ PSW_MASK_MCHECK | PSW_DEFAULT_KEY);
+long psw_user_bits = (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
+ PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+ PSW_MASK_PSTATE | PSW_DEFAULT_KEY);
/*
* User copy operations.
*/
char vmhalt_cmd[128] = "";
char vmpoff_cmd[128] = "";
-char vmpanic_cmd[128] = "";
+static char vmpanic_cmd[128] = "";
-static inline void strncpy_skip_quote(char *dst, char *src, int n)
+static void strncpy_skip_quote(char *dst, char *src, int n)
{
int sx, dx;
}
#ifdef CONFIG_SMP
-extern void machine_restart_smp(char *);
-extern void machine_halt_smp(void);
-extern void machine_power_off_smp(void);
-
void (*_machine_restart)(char *command) = machine_restart_smp;
void (*_machine_halt)(void) = machine_halt_smp;
void (*_machine_power_off)(void) = machine_power_off_smp;
}
early_param("ipldelay", early_parse_ipldelay);
+#ifdef CONFIG_S390_SWITCH_AMODE
+unsigned int switch_amode = 0;
+EXPORT_SYMBOL_GPL(switch_amode);
+
+static void set_amode_and_uaccess(unsigned long user_amode,
+ unsigned long user32_amode)
+{
+ psw_user_bits = PSW_BASE_BITS | PSW_MASK_DAT | user_amode |
+ PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+ PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
+#ifdef CONFIG_COMPAT
+ psw_user32_bits = PSW_BASE32_BITS | PSW_MASK_DAT | user_amode |
+ PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK |
+ PSW_MASK_PSTATE | PSW_DEFAULT_KEY;
+ psw32_user_bits = PSW32_BASE_BITS | PSW32_MASK_DAT | user32_amode |
+ PSW32_MASK_IO | PSW32_MASK_EXT | PSW32_MASK_MCHECK |
+ PSW32_MASK_PSTATE;
+#endif
+ psw_kernel_bits = PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME |
+ PSW_MASK_MCHECK | PSW_DEFAULT_KEY;
+
+ if (MACHINE_HAS_MVCOS) {
+ printk("mvcos available.\n");
+ memcpy(&uaccess, &uaccess_mvcos_switch, sizeof(uaccess));
+ } else {
+ printk("mvcos not available.\n");
+ memcpy(&uaccess, &uaccess_pt, sizeof(uaccess));
+ }
+}
+
+/*
+ * Switch kernel/user addressing modes?
+ */
+static int __init early_parse_switch_amode(char *p)
+{
+ switch_amode = 1;
+ return 0;
+}
+early_param("switch_amode", early_parse_switch_amode);
+
+#else /* CONFIG_S390_SWITCH_AMODE */
+static inline void set_amode_and_uaccess(unsigned long user_amode,
+ unsigned long user32_amode)
+{
+}
+#endif /* CONFIG_S390_SWITCH_AMODE */
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+unsigned int s390_noexec = 0;
+EXPORT_SYMBOL_GPL(s390_noexec);
+
+/*
+ * Enable execute protection?
+ */
+static int __init early_parse_noexec(char *p)
+{
+ if (!strncmp(p, "off", 3))
+ return 0;
+ switch_amode = 1;
+ s390_noexec = 1;
+ return 0;
+}
+early_param("noexec", early_parse_noexec);
+#endif /* CONFIG_S390_EXEC_PROTECT */
+
+static void setup_addressing_mode(void)
+{
+ if (s390_noexec) {
+ printk("S390 execute protection active, ");
+ set_amode_and_uaccess(PSW_ASC_SECONDARY, PSW32_ASC_SECONDARY);
+ return;
+ }
+ if (switch_amode) {
+ printk("S390 address spaces switched, ");
+ set_amode_and_uaccess(PSW_ASC_PRIMARY, PSW32_ASC_PRIMARY);
+ }
+}
+
static void __init
setup_lowcore(void)
{
lc->restart_psw.mask = PSW_BASE_BITS | PSW_DEFAULT_KEY;
lc->restart_psw.addr =
PSW_ADDR_AMODE | (unsigned long) restart_int_handler;
- lc->external_new_psw.mask = PSW_KERNEL_BITS;
+ if (switch_amode)
+ lc->restart_psw.mask |= PSW_ASC_HOME;
+ lc->external_new_psw.mask = psw_kernel_bits;
lc->external_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) ext_int_handler;
- lc->svc_new_psw.mask = PSW_KERNEL_BITS | PSW_MASK_IO | PSW_MASK_EXT;
+ lc->svc_new_psw.mask = psw_kernel_bits | PSW_MASK_IO | PSW_MASK_EXT;
lc->svc_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) system_call;
- lc->program_new_psw.mask = PSW_KERNEL_BITS;
+ lc->program_new_psw.mask = psw_kernel_bits;
lc->program_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long)pgm_check_handler;
lc->mcck_new_psw.mask =
- PSW_KERNEL_BITS & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
+ psw_kernel_bits & ~PSW_MASK_MCHECK & ~PSW_MASK_DAT;
lc->mcck_new_psw.addr =
PSW_ADDR_AMODE | (unsigned long) mcck_int_handler;
- lc->io_new_psw.mask = PSW_KERNEL_BITS;
+ lc->io_new_psw.mask = psw_kernel_bits;
lc->io_new_psw.addr = PSW_ADDR_AMODE | (unsigned long) io_int_handler;
lc->ipl_device = S390_lowcore.ipl_device;
lc->jiffy_timer = -1LL;
static void __init
setup_resources(void)
{
- struct resource *res;
+ struct resource *res, *sub_res;
int i;
code_resource.start = (unsigned long) &_text;
res->start = memory_chunk[i].addr;
res->end = memory_chunk[i].addr + memory_chunk[i].size - 1;
request_resource(&iomem_resource, res);
- request_resource(res, &code_resource);
- request_resource(res, &data_resource);
+
+ if (code_resource.start >= res->start &&
+ code_resource.start <= res->end &&
+ code_resource.end > res->end) {
+ sub_res = alloc_bootmem_low(sizeof(struct resource));
+ memcpy(sub_res, &code_resource,
+ sizeof(struct resource));
+ sub_res->end = res->end;
+ code_resource.start = res->end + 1;
+ request_resource(res, sub_res);
+ }
+
+ if (code_resource.start >= res->start &&
+ code_resource.start <= res->end &&
+ code_resource.end <= res->end)
+ request_resource(res, &code_resource);
+
+ if (data_resource.start >= res->start &&
+ data_resource.start <= res->end &&
+ data_resource.end > res->end) {
+ sub_res = alloc_bootmem_low(sizeof(struct resource));
+ memcpy(sub_res, &data_resource,
+ sizeof(struct resource));
+ sub_res->end = res->end;
+ data_resource.start = res->end + 1;
+ request_resource(res, sub_res);
+ }
+
+ if (data_resource.start >= res->start &&
+ data_resource.start <= res->end &&
+ data_resource.end <= res->end)
+ request_resource(res, &data_resource);
}
}
}
if (!memory_end)
memory_end = memory_size;
- if (real_size > memory_end)
- printk("More memory detected than supported. Unused: %luk\n",
- (real_size - memory_end) >> 10);
}
static void __init
setup_memory(void)
{
unsigned long bootmap_size;
- unsigned long start_pfn, end_pfn, init_pfn;
+ unsigned long start_pfn, end_pfn;
int i;
/*
start_pfn = PFN_UP(__pa(&_end));
end_pfn = max_pfn = PFN_DOWN(memory_end);
- /* Initialize storage key for kernel pages */
- for (init_pfn = 0 ; init_pfn < start_pfn; init_pfn++)
- page_set_storage_key(init_pfn << PAGE_SHIFT, PAGE_DEFAULT_KEY);
-
#ifdef CONFIG_BLK_DEV_INITRD
/*
* Move the initrd in case the bitmap of the bootmem allocater
parse_early_param();
setup_memory_end();
+ setup_addressing_mode();
setup_memory();
setup_resources();
setup_lowcore();
struct cpuinfo_S390 *cpuinfo;
unsigned long n = (unsigned long) v - 1;
+ s390_adjust_jiffies();
preempt_disable();
if (!n) {
seq_printf(m, "vendor_id : IBM/S390\n"
/* Copy a 'clean' PSW mask to the user to avoid leaking
information about whether PER is currently on. */
- user_sregs.regs.psw.mask = PSW_MASK_MERGE(PSW_USER_BITS, regs->psw.mask);
+ user_sregs.regs.psw.mask = PSW_MASK_MERGE(psw_user_bits, regs->psw.mask);
user_sregs.regs.psw.addr = regs->psw.addr;
memcpy(&user_sregs.regs.gprs, ®s->gprs, sizeof(sregs->regs.gprs));
memcpy(&user_sregs.regs.acrs, current->thread.acrs,
#include <linux/module.h>
#include <linux/init.h>
-
#include <linux/mm.h>
#include <linux/spinlock.h>
#include <linux/kernel_stat.h>
#include <linux/smp_lock.h>
-
#include <linux/delay.h>
#include <linux/cache.h>
#include <linux/interrupt.h>
#include <linux/cpu.h>
-
+#include <linux/timex.h>
+#include <asm/setup.h>
#include <asm/sigp.h>
#include <asm/pgalloc.h>
#include <asm/irq.h>
#include <asm/s390_ext.h>
#include <asm/cpcmd.h>
#include <asm/tlbflush.h>
+#include <asm/timer.h>
extern volatile int __cpu_logical_map[];
static struct task_struct *current_set[NR_CPUS];
-/*
- * Reboot, halt and power_off routines for SMP.
- */
-extern char vmhalt_cmd[];
-extern char vmpoff_cmd[];
-
static void smp_ext_bitcall(int, ec_bit_sig);
static void smp_ext_bitcall_others(ec_bit_sig);
}
EXPORT_SYMBOL(smp_call_function_on);
-static inline void do_send_stop(void)
+static void do_send_stop(void)
{
int cpu, rc;
}
}
-static inline void do_store_status(void)
+static void do_store_status(void)
{
int cpu, rc;
}
}
-static inline void do_wait_for_stop(void)
+static void do_wait_for_stop(void)
{
int cpu;
void smp_send_stop(void)
{
/* Disable all interrupts/machine checks */
- __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK);
+ __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
/* write magic number to zero page (absolute 0) */
lowcore_ptr[smp_processor_id()]->panic_magic = __PANIC_MAGIC;
* cpus are handled.
*/
-void do_ext_call_interrupt(__u16 code)
+static void do_ext_call_interrupt(__u16 code)
{
unsigned long bits;
/*
* callback for setting/clearing control bits
*/
-void smp_ctl_bit_callback(void *info) {
+static void smp_ctl_bit_callback(void *info) {
struct ec_creg_mask_parms *pp = info;
unsigned long cregs[16];
int i;
/*
* Activate a secondary processor.
*/
-extern void init_cpu_timer(void);
-extern void init_cpu_vtimer(void);
-
int __devinit start_secondary(void *cpuvoid)
{
/* Setup the cpu */
cpu_init();
preempt_disable();
- /* init per CPU timer */
+ /* Enable TOD clock interrupts on the secondary cpu. */
init_cpu_timer();
#ifdef CONFIG_VIRT_TIMER
+ /* Enable cpu timer interrupts on the secondary cpu. */
init_cpu_vtimer();
#endif
/* Enable pfault pseudo page faults on this cpu. */
spin_unlock_irqrestore(&smp_reserve_lock, flags);
}
-static inline int
+static int
cpu_stopped(int cpu)
{
__u32 status;
#include <linux/stacktrace.h>
#include <linux/kallsyms.h>
-static inline unsigned long save_context_stack(struct stack_trace *trace,
- unsigned int *skip,
- unsigned long sp,
- unsigned long low,
- unsigned long high)
+static unsigned long save_context_stack(struct stack_trace *trace,
+ unsigned int *skip,
+ unsigned long sp,
+ unsigned long low,
+ unsigned long high)
{
struct stack_frame *sf;
struct pt_regs *regs;
#include <asm/irq.h>
#include <asm/irq_regs.h>
#include <asm/timer.h>
+#include <asm/etr.h>
/* change this if you have some constant time drift */
#define USECS_PER_JIFFY ((unsigned long) 1000000/HZ)
#define CLK_TICKS_PER_JIFFY ((unsigned long) USECS_PER_JIFFY << 12)
+/* The value of the TOD clock for 1.1.1970. */
+#define TOD_UNIX_EPOCH 0x7d91048bca000000ULL
+
/*
* Create a small time difference between the timer interrupts
* on the different cpus to avoid lock contention.
#define TICK_SIZE tick
static ext_int_info_t ext_int_info_cc;
+static ext_int_info_t ext_int_etr_cc;
static u64 init_timer_cc;
static u64 jiffies_timer_cc;
static u64 xtime_cc;
#define s390_do_profile() do { ; } while(0)
#endif /* CONFIG_PROFILING */
-
/*
- * timer_interrupt() needs to keep up the real-time clock,
- * as well as call the "do_timer()" routine every clocktick
+ * Advance the per cpu tick counter up to the time given with the
+ * "time" argument. The per cpu update consists of accounting
+ * the virtual cpu time, calling update_process_times and calling
+ * the profiling hook. If xtime is before time it is advanced as well.
*/
-void account_ticks(void)
+void account_ticks(u64 time)
{
- __u64 tmp;
__u32 ticks;
+ __u64 tmp;
/* Calculate how many ticks have passed. */
- if (S390_lowcore.int_clock < S390_lowcore.jiffy_timer) {
- /*
- * We have to program the clock comparator even if
- * no tick has passed. That happens if e.g. an i/o
- * interrupt wakes up an idle processor that has
- * switched off its hz timer.
- */
- tmp = S390_lowcore.jiffy_timer + CPU_DEVIATION;
- asm volatile ("SCKC %0" : : "m" (tmp));
+ if (time < S390_lowcore.jiffy_timer)
return;
- }
- tmp = S390_lowcore.int_clock - S390_lowcore.jiffy_timer;
+ tmp = time - S390_lowcore.jiffy_timer;
if (tmp >= 2*CLK_TICKS_PER_JIFFY) { /* more than two ticks ? */
ticks = __div(tmp, CLK_TICKS_PER_JIFFY) + 1;
S390_lowcore.jiffy_timer +=
S390_lowcore.jiffy_timer += CLK_TICKS_PER_JIFFY;
}
- /* set clock comparator for next tick */
- tmp = S390_lowcore.jiffy_timer + CPU_DEVIATION;
- asm volatile ("SCKC %0" : : "m" (tmp));
-
#ifdef CONFIG_SMP
/*
* Do not rely on the boot cpu to do the calls to do_timer.
* Stop the HZ tick on the current CPU.
* Only cpu_idle may call this function.
*/
-static inline void stop_hz_timer(void)
+static void stop_hz_timer(void)
{
unsigned long flags;
unsigned long seq, next;
if (timer >= jiffies_timer_cc)
todval = timer;
}
- asm volatile ("SCKC %0" : : "m" (todval));
+ set_clock_comparator(todval);
}
/*
* Start the HZ tick on the current CPU.
* Only cpu_idle may call this function.
*/
-static inline void start_hz_timer(void)
+static void start_hz_timer(void)
{
BUG_ON(!in_interrupt());
if (!cpu_isset(smp_processor_id(), nohz_cpu_mask))
return;
- account_ticks();
+ account_ticks(get_clock());
+ set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
cpu_clear(smp_processor_id(), nohz_cpu_mask);
}
.notifier_call = nohz_idle_notify,
};
-void __init nohz_init(void)
+static void __init nohz_init(void)
{
if (register_idle_notifier(&nohz_idle_nb))
panic("Couldn't register idle notifier");
#endif
/*
- * Start the clock comparator on the current CPU.
+ * Set up per cpu jiffy timer and set the clock comparator.
+ */
+static void setup_jiffy_timer(void)
+{
+ /* Set up clock comparator to next jiffy. */
+ S390_lowcore.jiffy_timer =
+ jiffies_timer_cc + (jiffies_64 + 1) * CLK_TICKS_PER_JIFFY;
+ set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
+}
+
+/*
+ * Set up lowcore and control register of the current cpu to
+ * enable TOD clock and clock comparator interrupts.
*/
void init_cpu_timer(void)
{
- unsigned long cr0;
- __u64 timer;
+ setup_jiffy_timer();
- timer = jiffies_timer_cc + jiffies_64 * CLK_TICKS_PER_JIFFY;
- S390_lowcore.jiffy_timer = timer + CLK_TICKS_PER_JIFFY;
- timer += CLK_TICKS_PER_JIFFY + CPU_DEVIATION;
- asm volatile ("SCKC %0" : : "m" (timer));
- /* allow clock comparator timer interrupt */
- __ctl_store(cr0, 0, 0);
- cr0 |= 0x800;
- __ctl_load(cr0, 0, 0);
+ /* Enable clock comparator timer interrupt. */
+ __ctl_set_bit(0,11);
+
+ /* Always allow ETR external interrupts, even without an ETR. */
+ __ctl_set_bit(0, 4);
}
-extern void vtime_init(void);
+static void clock_comparator_interrupt(__u16 code)
+{
+ /* set clock comparator for next tick */
+ set_clock_comparator(S390_lowcore.jiffy_timer + CPU_DEVIATION);
+}
+
+static void etr_reset(void);
+static void etr_init(void);
+static void etr_ext_handler(__u16);
+
+/*
+ * Get the TOD clock running.
+ */
+static u64 __init reset_tod_clock(void)
+{
+ u64 time;
+
+ etr_reset();
+ if (store_clock(&time) == 0)
+ return time;
+ /* TOD clock not running. Set the clock to Unix Epoch. */
+ if (set_clock(TOD_UNIX_EPOCH) != 0 || store_clock(&time) != 0)
+ panic("TOD clock not operational.");
+
+ return TOD_UNIX_EPOCH;
+}
static cycle_t read_tod_clock(void)
{
*/
void __init time_init(void)
{
- __u64 set_time_cc;
- int cc;
-
- /* kick the TOD clock */
- asm volatile(
- " stck 0(%2)\n"
- " ipm %0\n"
- " srl %0,28"
- : "=d" (cc), "=m" (init_timer_cc)
- : "a" (&init_timer_cc) : "cc");
- switch (cc) {
- case 0: /* clock in set state: all is fine */
- break;
- case 1: /* clock in non-set state: FIXME */
- printk("time_init: TOD clock in non-set state\n");
- break;
- case 2: /* clock in error state: FIXME */
- printk("time_init: TOD clock in error state\n");
- break;
- case 3: /* clock in stopped or not-operational state: FIXME */
- printk("time_init: TOD clock stopped/non-operational\n");
- break;
- }
+ init_timer_cc = reset_tod_clock();
+ xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY;
jiffies_timer_cc = init_timer_cc - jiffies_64 * CLK_TICKS_PER_JIFFY;
/* set xtime */
- xtime_cc = init_timer_cc + CLK_TICKS_PER_JIFFY;
- set_time_cc = init_timer_cc - 0x8126d60e46000000LL +
- (0x3c26700LL*1000000*4096);
- tod_to_timeval(set_time_cc, &xtime);
+ tod_to_timeval(init_timer_cc - TOD_UNIX_EPOCH, &xtime);
set_normalized_timespec(&wall_to_monotonic,
-xtime.tv_sec, -xtime.tv_nsec);
/* request the clock comparator external interrupt */
- if (register_early_external_interrupt(0x1004, NULL,
+ if (register_early_external_interrupt(0x1004,
+ clock_comparator_interrupt,
&ext_int_info_cc) != 0)
panic("Couldn't request external interrupt 0x1004");
if (clocksource_register(&clocksource_tod) != 0)
panic("Could not register TOD clock source");
- init_cpu_timer();
+ /* request the etr external interrupt */
+ if (register_early_external_interrupt(0x1406, etr_ext_handler,
+ &ext_int_etr_cc) != 0)
+ panic("Couldn't request external interrupt 0x1406");
+
+ /* Enable TOD clock interrupts on the boot cpu. */
+ init_cpu_timer();
#ifdef CONFIG_NO_IDLE_HZ
nohz_init();
#ifdef CONFIG_VIRT_TIMER
vtime_init();
#endif
+ etr_init();
+}
+
+/*
+ * External Time Reference (ETR) code.
+ */
+static int etr_port0_online;
+static int etr_port1_online;
+
+static int __init early_parse_etr(char *p)
+{
+ if (strncmp(p, "off", 3) == 0)
+ etr_port0_online = etr_port1_online = 0;
+ else if (strncmp(p, "port0", 5) == 0)
+ etr_port0_online = 1;
+ else if (strncmp(p, "port1", 5) == 0)
+ etr_port1_online = 1;
+ else if (strncmp(p, "on", 2) == 0)
+ etr_port0_online = etr_port1_online = 1;
+ return 0;
+}
+early_param("etr", early_parse_etr);
+
+enum etr_event {
+ ETR_EVENT_PORT0_CHANGE,
+ ETR_EVENT_PORT1_CHANGE,
+ ETR_EVENT_PORT_ALERT,
+ ETR_EVENT_SYNC_CHECK,
+ ETR_EVENT_SWITCH_LOCAL,
+ ETR_EVENT_UPDATE,
+};
+
+enum etr_flags {
+ ETR_FLAG_ENOSYS,
+ ETR_FLAG_EACCES,
+ ETR_FLAG_STEAI,
+};
+
+/*
+ * Valid bit combinations of the eacr register are (x = don't care):
+ * e0 e1 dp p0 p1 ea es sl
+ * 0 0 x 0 0 0 0 0 initial, disabled state
+ * 0 0 x 0 1 1 0 0 port 1 online
+ * 0 0 x 1 0 1 0 0 port 0 online
+ * 0 0 x 1 1 1 0 0 both ports online
+ * 0 1 x 0 1 1 0 0 port 1 online and usable, ETR or PPS mode
+ * 0 1 x 0 1 1 0 1 port 1 online, usable and ETR mode
+ * 0 1 x 0 1 1 1 0 port 1 online, usable, PPS mode, in-sync
+ * 0 1 x 0 1 1 1 1 port 1 online, usable, ETR mode, in-sync
+ * 0 1 x 1 1 1 0 0 both ports online, port 1 usable
+ * 0 1 x 1 1 1 1 0 both ports online, port 1 usable, PPS mode, in-sync
+ * 0 1 x 1 1 1 1 1 both ports online, port 1 usable, ETR mode, in-sync
+ * 1 0 x 1 0 1 0 0 port 0 online and usable, ETR or PPS mode
+ * 1 0 x 1 0 1 0 1 port 0 online, usable and ETR mode
+ * 1 0 x 1 0 1 1 0 port 0 online, usable, PPS mode, in-sync
+ * 1 0 x 1 0 1 1 1 port 0 online, usable, ETR mode, in-sync
+ * 1 0 x 1 1 1 0 0 both ports online, port 0 usable
+ * 1 0 x 1 1 1 1 0 both ports online, port 0 usable, PPS mode, in-sync
+ * 1 0 x 1 1 1 1 1 both ports online, port 0 usable, ETR mode, in-sync
+ * 1 1 x 1 1 1 1 0 both ports online & usable, ETR, in-sync
+ * 1 1 x 1 1 1 1 1 both ports online & usable, ETR, in-sync
+ */
+static struct etr_eacr etr_eacr;
+static u64 etr_tolec; /* time of last eacr update */
+static unsigned long etr_flags;
+static struct etr_aib etr_port0;
+static int etr_port0_uptodate;
+static struct etr_aib etr_port1;
+static int etr_port1_uptodate;
+static unsigned long etr_events;
+static struct timer_list etr_timer;
+static struct tasklet_struct etr_tasklet;
+static DEFINE_PER_CPU(atomic_t, etr_sync_word);
+
+static void etr_timeout(unsigned long dummy);
+static void etr_tasklet_fn(unsigned long dummy);
+
+/*
+ * The etr get_clock function. It will write the current clock value
+ * to the clock pointer and return 0 if the clock is in sync with the
+ * external time source. If the clock mode is local it will return
+ * -ENOSYS and -EAGAIN if the clock is not in sync with the external
+ * reference. This function is what ETR is all about..
+ */
+int get_sync_clock(unsigned long long *clock)
+{
+ atomic_t *sw_ptr;
+ unsigned int sw0, sw1;
+
+ sw_ptr = &get_cpu_var(etr_sync_word);
+ sw0 = atomic_read(sw_ptr);
+ *clock = get_clock();
+ sw1 = atomic_read(sw_ptr);
+ put_cpu_var(etr_sync_sync);
+ if (sw0 == sw1 && (sw0 & 0x80000000U))
+ /* Success: time is in sync. */
+ return 0;
+ if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
+ return -ENOSYS;
+ if (test_bit(ETR_FLAG_EACCES, &etr_flags))
+ return -EACCES;
+ return -EAGAIN;
+}
+EXPORT_SYMBOL(get_sync_clock);
+
+/*
+ * Make get_sync_clock return -EAGAIN.
+ */
+static void etr_disable_sync_clock(void *dummy)
+{
+ atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
+ /*
+ * Clear the in-sync bit 2^31. All get_sync_clock calls will
+ * fail until the sync bit is turned back on. In addition
+ * increase the "sequence" counter to avoid the race of an
+ * etr event and the complete recovery against get_sync_clock.
+ */
+ atomic_clear_mask(0x80000000, sw_ptr);
+ atomic_inc(sw_ptr);
+}
+
+/*
+ * Make get_sync_clock return 0 again.
+ * Needs to be called from a context disabled for preemption.
+ */
+static void etr_enable_sync_clock(void)
+{
+ atomic_t *sw_ptr = &__get_cpu_var(etr_sync_word);
+ atomic_set_mask(0x80000000, sw_ptr);
+}
+
+/*
+ * Reset ETR attachment.
+ */
+static void etr_reset(void)
+{
+ etr_eacr = (struct etr_eacr) {
+ .e0 = 0, .e1 = 0, ._pad0 = 4, .dp = 0,
+ .p0 = 0, .p1 = 0, ._pad1 = 0, .ea = 0,
+ .es = 0, .sl = 0 };
+ if (etr_setr(&etr_eacr) == 0)
+ etr_tolec = get_clock();
+ else {
+ set_bit(ETR_FLAG_ENOSYS, &etr_flags);
+ if (etr_port0_online || etr_port1_online) {
+ printk(KERN_WARNING "Running on non ETR capable "
+ "machine, only local mode available.\n");
+ etr_port0_online = etr_port1_online = 0;
+ }
+ }
+}
+
+static void etr_init(void)
+{
+ struct etr_aib aib;
+
+ if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
+ return;
+ /* Check if this machine has the steai instruction. */
+ if (etr_steai(&aib, ETR_STEAI_STEPPING_PORT) == 0)
+ set_bit(ETR_FLAG_STEAI, &etr_flags);
+ setup_timer(&etr_timer, etr_timeout, 0UL);
+ tasklet_init(&etr_tasklet, etr_tasklet_fn, 0);
+ if (!etr_port0_online && !etr_port1_online)
+ set_bit(ETR_FLAG_EACCES, &etr_flags);
+ if (etr_port0_online) {
+ set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+ }
+ if (etr_port1_online) {
+ set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+ }
+}
+
+/*
+ * Two sorts of ETR machine checks. The architecture reads:
+ * "When a machine-check niterruption occurs and if a switch-to-local or
+ * ETR-sync-check interrupt request is pending but disabled, this pending
+ * disabled interruption request is indicated and is cleared".
+ * Which means that we can get etr_switch_to_local events from the machine
+ * check handler although the interruption condition is disabled. Lovely..
+ */
+
+/*
+ * Switch to local machine check. This is called when the last usable
+ * ETR port goes inactive. After switch to local the clock is not in sync.
+ */
+void etr_switch_to_local(void)
+{
+ if (!etr_eacr.sl)
+ return;
+ etr_disable_sync_clock(NULL);
+ set_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+}
+
+/*
+ * ETR sync check machine check. This is called when the ETR OTE and the
+ * local clock OTE are farther apart than the ETR sync check tolerance.
+ * After a ETR sync check the clock is not in sync. The machine check
+ * is broadcasted to all cpus at the same time.
+ */
+void etr_sync_check(void)
+{
+ if (!etr_eacr.es)
+ return;
+ etr_disable_sync_clock(NULL);
+ set_bit(ETR_EVENT_SYNC_CHECK, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+}
+
+/*
+ * ETR external interrupt. There are two causes:
+ * 1) port state change, check the usability of the port
+ * 2) port alert, one of the ETR-data-validity bits (v1-v2 bits of the
+ * sldr-status word) or ETR-data word 1 (edf1) or ETR-data word 3 (edf3)
+ * or ETR-data word 4 (edf4) has changed.
+ */
+static void etr_ext_handler(__u16 code)
+{
+ struct etr_interruption_parameter *intparm =
+ (struct etr_interruption_parameter *) &S390_lowcore.ext_params;
+
+ if (intparm->pc0)
+ /* ETR port 0 state change. */
+ set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
+ if (intparm->pc1)
+ /* ETR port 1 state change. */
+ set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
+ if (intparm->eai)
+ /*
+ * ETR port alert on either port 0, 1 or both.
+ * Both ports are not up-to-date now.
+ */
+ set_bit(ETR_EVENT_PORT_ALERT, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+}
+
+static void etr_timeout(unsigned long dummy)
+{
+ set_bit(ETR_EVENT_UPDATE, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+}
+
+/*
+ * Check if the etr mode is pss.
+ */
+static inline int etr_mode_is_pps(struct etr_eacr eacr)
+{
+ return eacr.es && !eacr.sl;
+}
+
+/*
+ * Check if the etr mode is etr.
+ */
+static inline int etr_mode_is_etr(struct etr_eacr eacr)
+{
+ return eacr.es && eacr.sl;
+}
+
+/*
+ * Check if the port can be used for TOD synchronization.
+ * For PPS mode the port has to receive OTEs. For ETR mode
+ * the port has to receive OTEs, the ETR stepping bit has to
+ * be zero and the validity bits for data frame 1, 2, and 3
+ * have to be 1.
+ */
+static int etr_port_valid(struct etr_aib *aib, int port)
+{
+ unsigned int psc;
+
+ /* Check that this port is receiving OTEs. */
+ if (aib->tsp == 0)
+ return 0;
+
+ psc = port ? aib->esw.psc1 : aib->esw.psc0;
+ if (psc == etr_lpsc_pps_mode)
+ return 1;
+ if (psc == etr_lpsc_operational_step)
+ return !aib->esw.y && aib->slsw.v1 &&
+ aib->slsw.v2 && aib->slsw.v3;
+ return 0;
+}
+
+/*
+ * Check if two ports are on the same network.
+ */
+static int etr_compare_network(struct etr_aib *aib1, struct etr_aib *aib2)
+{
+ // FIXME: any other fields we have to compare?
+ return aib1->edf1.net_id == aib2->edf1.net_id;
+}
+
+/*
+ * Wrapper for etr_stei that converts physical port states
+ * to logical port states to be consistent with the output
+ * of stetr (see etr_psc vs. etr_lpsc).
+ */
+static void etr_steai_cv(struct etr_aib *aib, unsigned int func)
+{
+ BUG_ON(etr_steai(aib, func) != 0);
+ /* Convert port state to logical port state. */
+ if (aib->esw.psc0 == 1)
+ aib->esw.psc0 = 2;
+ else if (aib->esw.psc0 == 0 && aib->esw.p == 0)
+ aib->esw.psc0 = 1;
+ if (aib->esw.psc1 == 1)
+ aib->esw.psc1 = 2;
+ else if (aib->esw.psc1 == 0 && aib->esw.p == 1)
+ aib->esw.psc1 = 1;
+}
+
+/*
+ * Check if the aib a2 is still connected to the same attachment as
+ * aib a1, the etv values differ by one and a2 is valid.
+ */
+static int etr_aib_follows(struct etr_aib *a1, struct etr_aib *a2, int p)
+{
+ int state_a1, state_a2;
+
+ /* Paranoia check: e0/e1 should better be the same. */
+ if (a1->esw.eacr.e0 != a2->esw.eacr.e0 ||
+ a1->esw.eacr.e1 != a2->esw.eacr.e1)
+ return 0;
+
+ /* Still connected to the same etr ? */
+ state_a1 = p ? a1->esw.psc1 : a1->esw.psc0;
+ state_a2 = p ? a2->esw.psc1 : a2->esw.psc0;
+ if (state_a1 == etr_lpsc_operational_step) {
+ if (state_a2 != etr_lpsc_operational_step ||
+ a1->edf1.net_id != a2->edf1.net_id ||
+ a1->edf1.etr_id != a2->edf1.etr_id ||
+ a1->edf1.etr_pn != a2->edf1.etr_pn)
+ return 0;
+ } else if (state_a2 != etr_lpsc_pps_mode)
+ return 0;
+
+ /* The ETV value of a2 needs to be ETV of a1 + 1. */
+ if (a1->edf2.etv + 1 != a2->edf2.etv)
+ return 0;
+
+ if (!etr_port_valid(a2, p))
+ return 0;
+
+ return 1;
+}
+
+/*
+ * The time is "clock". xtime is what we think the time is.
+ * Adjust the value by a multiple of jiffies and add the delta to ntp.
+ * "delay" is an approximation how long the synchronization took. If
+ * the time correction is positive, then "delay" is subtracted from
+ * the time difference and only the remaining part is passed to ntp.
+ */
+static void etr_adjust_time(unsigned long long clock, unsigned long long delay)
+{
+ unsigned long long delta, ticks;
+ struct timex adjust;
+
+ /*
+ * We don't have to take the xtime lock because the cpu
+ * executing etr_adjust_time is running disabled in
+ * tasklet context and all other cpus are looping in
+ * etr_sync_cpu_start.
+ */
+ if (clock > xtime_cc) {
+ /* It is later than we thought. */
+ delta = ticks = clock - xtime_cc;
+ delta = ticks = (delta < delay) ? 0 : delta - delay;
+ delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+ init_timer_cc = init_timer_cc + delta;
+ jiffies_timer_cc = jiffies_timer_cc + delta;
+ xtime_cc = xtime_cc + delta;
+ adjust.offset = ticks * (1000000 / HZ);
+ } else {
+ /* It is earlier than we thought. */
+ delta = ticks = xtime_cc - clock;
+ delta -= do_div(ticks, CLK_TICKS_PER_JIFFY);
+ init_timer_cc = init_timer_cc - delta;
+ jiffies_timer_cc = jiffies_timer_cc - delta;
+ xtime_cc = xtime_cc - delta;
+ adjust.offset = -ticks * (1000000 / HZ);
+ }
+ if (adjust.offset != 0) {
+ printk(KERN_NOTICE "etr: time adjusted by %li micro-seconds\n",
+ adjust.offset);
+ adjust.modes = ADJ_OFFSET_SINGLESHOT;
+ do_adjtimex(&adjust);
+ }
+}
+
+static void etr_sync_cpu_start(void *dummy)
+{
+ int *in_sync = dummy;
+
+ etr_enable_sync_clock();
+ /*
+ * This looks like a busy wait loop but it isn't. etr_sync_cpus
+ * is called on all other cpus while the TOD clocks is stopped.
+ * __udelay will stop the cpu on an enabled wait psw until the
+ * TOD is running again.
+ */
+ while (*in_sync == 0)
+ __udelay(1);
+ if (*in_sync != 1)
+ /* Didn't work. Clear per-cpu in sync bit again. */
+ etr_disable_sync_clock(NULL);
+ /*
+ * This round of TOD syncing is done. Set the clock comparator
+ * to the next tick and let the processor continue.
+ */
+ setup_jiffy_timer();
+}
+
+static void etr_sync_cpu_end(void *dummy)
+{
+}
+
+/*
+ * Sync the TOD clock using the port refered to by aibp. This port
+ * has to be enabled and the other port has to be disabled. The
+ * last eacr update has to be more than 1.6 seconds in the past.
+ */
+static int etr_sync_clock(struct etr_aib *aib, int port)
+{
+ struct etr_aib *sync_port;
+ unsigned long long clock, delay;
+ int in_sync, follows;
+ int rc;
+
+ /* Check if the current aib is adjacent to the sync port aib. */
+ sync_port = (port == 0) ? &etr_port0 : &etr_port1;
+ follows = etr_aib_follows(sync_port, aib, port);
+ memcpy(sync_port, aib, sizeof(*aib));
+ if (!follows)
+ return -EAGAIN;
+
+ /*
+ * Catch all other cpus and make them wait until we have
+ * successfully synced the clock. smp_call_function will
+ * return after all other cpus are in etr_sync_cpu_start.
+ */
+ in_sync = 0;
+ preempt_disable();
+ smp_call_function(etr_sync_cpu_start,&in_sync,0,0);
+ local_irq_disable();
+ etr_enable_sync_clock();
+
+ /* Set clock to next OTE. */
+ __ctl_set_bit(14, 21);
+ __ctl_set_bit(0, 29);
+ clock = ((unsigned long long) (aib->edf2.etv + 1)) << 32;
+ if (set_clock(clock) == 0) {
+ __udelay(1); /* Wait for the clock to start. */
+ __ctl_clear_bit(0, 29);
+ __ctl_clear_bit(14, 21);
+ etr_stetr(aib);
+ /* Adjust Linux timing variables. */
+ delay = (unsigned long long)
+ (aib->edf2.etv - sync_port->edf2.etv) << 32;
+ etr_adjust_time(clock, delay);
+ setup_jiffy_timer();
+ /* Verify that the clock is properly set. */
+ if (!etr_aib_follows(sync_port, aib, port)) {
+ /* Didn't work. */
+ etr_disable_sync_clock(NULL);
+ in_sync = -EAGAIN;
+ rc = -EAGAIN;
+ } else {
+ in_sync = 1;
+ rc = 0;
+ }
+ } else {
+ /* Could not set the clock ?!? */
+ __ctl_clear_bit(0, 29);
+ __ctl_clear_bit(14, 21);
+ etr_disable_sync_clock(NULL);
+ in_sync = -EAGAIN;
+ rc = -EAGAIN;
+ }
+ local_irq_enable();
+ smp_call_function(etr_sync_cpu_end,NULL,0,0);
+ preempt_enable();
+ return rc;
+}
+
+/*
+ * Handle the immediate effects of the different events.
+ * The port change event is used for online/offline changes.
+ */
+static struct etr_eacr etr_handle_events(struct etr_eacr eacr)
+{
+ if (test_and_clear_bit(ETR_EVENT_SYNC_CHECK, &etr_events))
+ eacr.es = 0;
+ if (test_and_clear_bit(ETR_EVENT_SWITCH_LOCAL, &etr_events))
+ eacr.es = eacr.sl = 0;
+ if (test_and_clear_bit(ETR_EVENT_PORT_ALERT, &etr_events))
+ etr_port0_uptodate = etr_port1_uptodate = 0;
+
+ if (test_and_clear_bit(ETR_EVENT_PORT0_CHANGE, &etr_events)) {
+ if (eacr.e0)
+ /*
+ * Port change of an enabled port. We have to
+ * assume that this can have caused an stepping
+ * port switch.
+ */
+ etr_tolec = get_clock();
+ eacr.p0 = etr_port0_online;
+ if (!eacr.p0)
+ eacr.e0 = 0;
+ etr_port0_uptodate = 0;
+ }
+ if (test_and_clear_bit(ETR_EVENT_PORT1_CHANGE, &etr_events)) {
+ if (eacr.e1)
+ /*
+ * Port change of an enabled port. We have to
+ * assume that this can have caused an stepping
+ * port switch.
+ */
+ etr_tolec = get_clock();
+ eacr.p1 = etr_port1_online;
+ if (!eacr.p1)
+ eacr.e1 = 0;
+ etr_port1_uptodate = 0;
+ }
+ clear_bit(ETR_EVENT_UPDATE, &etr_events);
+ return eacr;
+}
+
+/*
+ * Set up a timer that expires after the etr_tolec + 1.6 seconds if
+ * one of the ports needs an update.
+ */
+static void etr_set_tolec_timeout(unsigned long long now)
+{
+ unsigned long micros;
+
+ if ((!etr_eacr.p0 || etr_port0_uptodate) &&
+ (!etr_eacr.p1 || etr_port1_uptodate))
+ return;
+ micros = (now > etr_tolec) ? ((now - etr_tolec) >> 12) : 0;
+ micros = (micros > 1600000) ? 0 : 1600000 - micros;
+ mod_timer(&etr_timer, jiffies + (micros * HZ) / 1000000 + 1);
+}
+
+/*
+ * Set up a time that expires after 1/2 second.
+ */
+static void etr_set_sync_timeout(void)
+{
+ mod_timer(&etr_timer, jiffies + HZ/2);
+}
+
+/*
+ * Update the aib information for one or both ports.
+ */
+static struct etr_eacr etr_handle_update(struct etr_aib *aib,
+ struct etr_eacr eacr)
+{
+ /* With both ports disabled the aib information is useless. */
+ if (!eacr.e0 && !eacr.e1)
+ return eacr;
+
+ /* Update port0 or port1 with aib stored in etr_tasklet_fn. */
+ if (aib->esw.q == 0) {
+ /* Information for port 0 stored. */
+ if (eacr.p0 && !etr_port0_uptodate) {
+ etr_port0 = *aib;
+ if (etr_port0_online)
+ etr_port0_uptodate = 1;
+ }
+ } else {
+ /* Information for port 1 stored. */
+ if (eacr.p1 && !etr_port1_uptodate) {
+ etr_port1 = *aib;
+ if (etr_port0_online)
+ etr_port1_uptodate = 1;
+ }
+ }
+
+ /*
+ * Do not try to get the alternate port aib if the clock
+ * is not in sync yet.
+ */
+ if (!eacr.es)
+ return eacr;
+
+ /*
+ * If steai is available we can get the information about
+ * the other port immediately. If only stetr is available the
+ * data-port bit toggle has to be used.
+ */
+ if (test_bit(ETR_FLAG_STEAI, &etr_flags)) {
+ if (eacr.p0 && !etr_port0_uptodate) {
+ etr_steai_cv(&etr_port0, ETR_STEAI_PORT_0);
+ etr_port0_uptodate = 1;
+ }
+ if (eacr.p1 && !etr_port1_uptodate) {
+ etr_steai_cv(&etr_port1, ETR_STEAI_PORT_1);
+ etr_port1_uptodate = 1;
+ }
+ } else {
+ /*
+ * One port was updated above, if the other
+ * port is not uptodate toggle dp bit.
+ */
+ if ((eacr.p0 && !etr_port0_uptodate) ||
+ (eacr.p1 && !etr_port1_uptodate))
+ eacr.dp ^= 1;
+ else
+ eacr.dp = 0;
+ }
+ return eacr;
+}
+
+/*
+ * Write new etr control register if it differs from the current one.
+ * Return 1 if etr_tolec has been updated as well.
+ */
+static void etr_update_eacr(struct etr_eacr eacr)
+{
+ int dp_changed;
+
+ if (memcmp(&etr_eacr, &eacr, sizeof(eacr)) == 0)
+ /* No change, return. */
+ return;
+ /*
+ * The disable of an active port of the change of the data port
+ * bit can/will cause a change in the data port.
+ */
+ dp_changed = etr_eacr.e0 > eacr.e0 || etr_eacr.e1 > eacr.e1 ||
+ (etr_eacr.dp ^ eacr.dp) != 0;
+ etr_eacr = eacr;
+ etr_setr(&etr_eacr);
+ if (dp_changed)
+ etr_tolec = get_clock();
+}
+
+/*
+ * ETR tasklet. In this function you'll find the main logic. In
+ * particular this is the only function that calls etr_update_eacr(),
+ * it "controls" the etr control register.
+ */
+static void etr_tasklet_fn(unsigned long dummy)
+{
+ unsigned long long now;
+ struct etr_eacr eacr;
+ struct etr_aib aib;
+ int sync_port;
+
+ /* Create working copy of etr_eacr. */
+ eacr = etr_eacr;
+
+ /* Check for the different events and their immediate effects. */
+ eacr = etr_handle_events(eacr);
+
+ /* Check if ETR is supposed to be active. */
+ eacr.ea = eacr.p0 || eacr.p1;
+ if (!eacr.ea) {
+ /* Both ports offline. Reset everything. */
+ eacr.dp = eacr.es = eacr.sl = 0;
+ on_each_cpu(etr_disable_sync_clock, NULL, 0, 1);
+ del_timer_sync(&etr_timer);
+ etr_update_eacr(eacr);
+ set_bit(ETR_FLAG_EACCES, &etr_flags);
+ return;
+ }
+
+ /* Store aib to get the current ETR status word. */
+ BUG_ON(etr_stetr(&aib) != 0);
+ etr_port0.esw = etr_port1.esw = aib.esw; /* Copy status word. */
+ now = get_clock();
+
+ /*
+ * Update the port information if the last stepping port change
+ * or data port change is older than 1.6 seconds.
+ */
+ if (now >= etr_tolec + (1600000 << 12))
+ eacr = etr_handle_update(&aib, eacr);
+
+ /*
+ * Select ports to enable. The prefered synchronization mode is PPS.
+ * If a port can be enabled depends on a number of things:
+ * 1) The port needs to be online and uptodate. A port is not
+ * disabled just because it is not uptodate, but it is only
+ * enabled if it is uptodate.
+ * 2) The port needs to have the same mode (pps / etr).
+ * 3) The port needs to be usable -> etr_port_valid() == 1
+ * 4) To enable the second port the clock needs to be in sync.
+ * 5) If both ports are useable and are ETR ports, the network id
+ * has to be the same.
+ * The eacr.sl bit is used to indicate etr mode vs. pps mode.
+ */
+ if (eacr.p0 && aib.esw.psc0 == etr_lpsc_pps_mode) {
+ eacr.sl = 0;
+ eacr.e0 = 1;
+ if (!etr_mode_is_pps(etr_eacr))
+ eacr.es = 0;
+ if (!eacr.es || !eacr.p1 || aib.esw.psc1 != etr_lpsc_pps_mode)
+ eacr.e1 = 0;
+ // FIXME: uptodate checks ?
+ else if (etr_port0_uptodate && etr_port1_uptodate)
+ eacr.e1 = 1;
+ sync_port = (etr_port0_uptodate &&
+ etr_port_valid(&etr_port0, 0)) ? 0 : -1;
+ clear_bit(ETR_FLAG_EACCES, &etr_flags);
+ } else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_pps_mode) {
+ eacr.sl = 0;
+ eacr.e0 = 0;
+ eacr.e1 = 1;
+ if (!etr_mode_is_pps(etr_eacr))
+ eacr.es = 0;
+ sync_port = (etr_port1_uptodate &&
+ etr_port_valid(&etr_port1, 1)) ? 1 : -1;
+ clear_bit(ETR_FLAG_EACCES, &etr_flags);
+ } else if (eacr.p0 && aib.esw.psc0 == etr_lpsc_operational_step) {
+ eacr.sl = 1;
+ eacr.e0 = 1;
+ if (!etr_mode_is_etr(etr_eacr))
+ eacr.es = 0;
+ if (!eacr.es || !eacr.p1 ||
+ aib.esw.psc1 != etr_lpsc_operational_alt)
+ eacr.e1 = 0;
+ else if (etr_port0_uptodate && etr_port1_uptodate &&
+ etr_compare_network(&etr_port0, &etr_port1))
+ eacr.e1 = 1;
+ sync_port = (etr_port0_uptodate &&
+ etr_port_valid(&etr_port0, 0)) ? 0 : -1;
+ clear_bit(ETR_FLAG_EACCES, &etr_flags);
+ } else if (eacr.p1 && aib.esw.psc1 == etr_lpsc_operational_step) {
+ eacr.sl = 1;
+ eacr.e0 = 0;
+ eacr.e1 = 1;
+ if (!etr_mode_is_etr(etr_eacr))
+ eacr.es = 0;
+ sync_port = (etr_port1_uptodate &&
+ etr_port_valid(&etr_port1, 1)) ? 1 : -1;
+ clear_bit(ETR_FLAG_EACCES, &etr_flags);
+ } else {
+ /* Both ports not usable. */
+ eacr.es = eacr.sl = 0;
+ sync_port = -1;
+ set_bit(ETR_FLAG_EACCES, &etr_flags);
+ }
+
+ /*
+ * If the clock is in sync just update the eacr and return.
+ * If there is no valid sync port wait for a port update.
+ */
+ if (eacr.es || sync_port < 0) {
+ etr_update_eacr(eacr);
+ etr_set_tolec_timeout(now);
+ return;
+ }
+
+ /*
+ * Prepare control register for clock syncing
+ * (reset data port bit, set sync check control.
+ */
+ eacr.dp = 0;
+ eacr.es = 1;
+
+ /*
+ * Update eacr and try to synchronize the clock. If the update
+ * of eacr caused a stepping port switch (or if we have to
+ * assume that a stepping port switch has occured) or the
+ * clock syncing failed, reset the sync check control bit
+ * and set up a timer to try again after 0.5 seconds
+ */
+ etr_update_eacr(eacr);
+ if (now < etr_tolec + (1600000 << 12) ||
+ etr_sync_clock(&aib, sync_port) != 0) {
+ /* Sync failed. Try again in 1/2 second. */
+ eacr.es = 0;
+ etr_update_eacr(eacr);
+ etr_set_sync_timeout();
+ } else
+ etr_set_tolec_timeout(now);
+}
+
+/*
+ * Sysfs interface functions
+ */
+static struct sysdev_class etr_sysclass = {
+ set_kset_name("etr")
+};
+
+static struct sys_device etr_port0_dev = {
+ .id = 0,
+ .cls = &etr_sysclass,
+};
+
+static struct sys_device etr_port1_dev = {
+ .id = 1,
+ .cls = &etr_sysclass,
+};
+
+/*
+ * ETR class attributes
+ */
+static ssize_t etr_stepping_port_show(struct sysdev_class *class, char *buf)
+{
+ return sprintf(buf, "%i\n", etr_port0.esw.p);
+}
+
+static SYSDEV_CLASS_ATTR(stepping_port, 0400, etr_stepping_port_show, NULL);
+
+static ssize_t etr_stepping_mode_show(struct sysdev_class *class, char *buf)
+{
+ char *mode_str;
+
+ if (etr_mode_is_pps(etr_eacr))
+ mode_str = "pps";
+ else if (etr_mode_is_etr(etr_eacr))
+ mode_str = "etr";
+ else
+ mode_str = "local";
+ return sprintf(buf, "%s\n", mode_str);
+}
+
+static SYSDEV_CLASS_ATTR(stepping_mode, 0400, etr_stepping_mode_show, NULL);
+
+/*
+ * ETR port attributes
+ */
+static inline struct etr_aib *etr_aib_from_dev(struct sys_device *dev)
+{
+ if (dev == &etr_port0_dev)
+ return etr_port0_online ? &etr_port0 : NULL;
+ else
+ return etr_port1_online ? &etr_port1 : NULL;
+}
+
+static ssize_t etr_online_show(struct sys_device *dev, char *buf)
+{
+ unsigned int online;
+
+ online = (dev == &etr_port0_dev) ? etr_port0_online : etr_port1_online;
+ return sprintf(buf, "%i\n", online);
+}
+
+static ssize_t etr_online_store(struct sys_device *dev,
+ const char *buf, size_t count)
+{
+ unsigned int value;
+
+ value = simple_strtoul(buf, NULL, 0);
+ if (value != 0 && value != 1)
+ return -EINVAL;
+ if (test_bit(ETR_FLAG_ENOSYS, &etr_flags))
+ return -ENOSYS;
+ if (dev == &etr_port0_dev) {
+ if (etr_port0_online == value)
+ return count; /* Nothing to do. */
+ etr_port0_online = value;
+ set_bit(ETR_EVENT_PORT0_CHANGE, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+ } else {
+ if (etr_port1_online == value)
+ return count; /* Nothing to do. */
+ etr_port1_online = value;
+ set_bit(ETR_EVENT_PORT1_CHANGE, &etr_events);
+ tasklet_hi_schedule(&etr_tasklet);
+ }
+ return count;
+}
+
+static SYSDEV_ATTR(online, 0600, etr_online_show, etr_online_store);
+
+static ssize_t etr_stepping_control_show(struct sys_device *dev, char *buf)
+{
+ return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
+ etr_eacr.e0 : etr_eacr.e1);
+}
+
+static SYSDEV_ATTR(stepping_control, 0400, etr_stepping_control_show, NULL);
+
+static ssize_t etr_mode_code_show(struct sys_device *dev, char *buf)
+{
+ if (!etr_port0_online && !etr_port1_online)
+ /* Status word is not uptodate if both ports are offline. */
+ return -ENODATA;
+ return sprintf(buf, "%i\n", (dev == &etr_port0_dev) ?
+ etr_port0.esw.psc0 : etr_port0.esw.psc1);
+}
+
+static SYSDEV_ATTR(state_code, 0400, etr_mode_code_show, NULL);
+
+static ssize_t etr_untuned_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v1)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf1.u);
+}
+
+static SYSDEV_ATTR(untuned, 0400, etr_untuned_show, NULL);
+
+static ssize_t etr_network_id_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v1)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf1.net_id);
+}
+
+static SYSDEV_ATTR(network, 0400, etr_network_id_show, NULL);
+
+static ssize_t etr_id_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v1)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf1.etr_id);
+}
+
+static SYSDEV_ATTR(id, 0400, etr_id_show, NULL);
+
+static ssize_t etr_port_number_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v1)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf1.etr_pn);
+}
+
+static SYSDEV_ATTR(port, 0400, etr_port_number_show, NULL);
+
+static ssize_t etr_coupled_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v3)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf3.c);
+}
+
+static SYSDEV_ATTR(coupled, 0400, etr_coupled_show, NULL);
+
+static ssize_t etr_local_time_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v3)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf3.blto);
+}
+
+static SYSDEV_ATTR(local_time, 0400, etr_local_time_show, NULL);
+
+static ssize_t etr_utc_offset_show(struct sys_device *dev, char *buf)
+{
+ struct etr_aib *aib = etr_aib_from_dev(dev);
+
+ if (!aib || !aib->slsw.v3)
+ return -ENODATA;
+ return sprintf(buf, "%i\n", aib->edf3.buo);
+}
+
+static SYSDEV_ATTR(utc_offset, 0400, etr_utc_offset_show, NULL);
+
+static struct sysdev_attribute *etr_port_attributes[] = {
+ &attr_online,
+ &attr_stepping_control,
+ &attr_state_code,
+ &attr_untuned,
+ &attr_network,
+ &attr_id,
+ &attr_port,
+ &attr_coupled,
+ &attr_local_time,
+ &attr_utc_offset,
+ NULL
+};
+
+static int __init etr_register_port(struct sys_device *dev)
+{
+ struct sysdev_attribute **attr;
+ int rc;
+
+ rc = sysdev_register(dev);
+ if (rc)
+ goto out;
+ for (attr = etr_port_attributes; *attr; attr++) {
+ rc = sysdev_create_file(dev, *attr);
+ if (rc)
+ goto out_unreg;
+ }
+ return 0;
+out_unreg:
+ for (; attr >= etr_port_attributes; attr--)
+ sysdev_remove_file(dev, *attr);
+ sysdev_unregister(dev);
+out:
+ return rc;
+}
+
+static void __init etr_unregister_port(struct sys_device *dev)
+{
+ struct sysdev_attribute **attr;
+
+ for (attr = etr_port_attributes; *attr; attr++)
+ sysdev_remove_file(dev, *attr);
+ sysdev_unregister(dev);
+}
+
+static int __init etr_init_sysfs(void)
+{
+ int rc;
+
+ rc = sysdev_class_register(&etr_sysclass);
+ if (rc)
+ goto out;
+ rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_port);
+ if (rc)
+ goto out_unreg_class;
+ rc = sysdev_class_create_file(&etr_sysclass, &attr_stepping_mode);
+ if (rc)
+ goto out_remove_stepping_port;
+ rc = etr_register_port(&etr_port0_dev);
+ if (rc)
+ goto out_remove_stepping_mode;
+ rc = etr_register_port(&etr_port1_dev);
+ if (rc)
+ goto out_remove_port0;
+ return 0;
+
+out_remove_port0:
+ etr_unregister_port(&etr_port0_dev);
+out_remove_stepping_mode:
+ sysdev_class_remove_file(&etr_sysclass, &attr_stepping_mode);
+out_remove_stepping_port:
+ sysdev_class_remove_file(&etr_sysclass, &attr_stepping_port);
+out_unreg_class:
+ sysdev_class_unregister(&etr_sysclass);
+out:
+ return rc;
}
+device_initcall(etr_init_sysfs);
return buffer;
}
-DEFINE_SPINLOCK(die_lock);
+static DEFINE_SPINLOCK(die_lock);
void die(const char * str, struct pt_regs * regs, long err)
{
force_sig(SIGTRAP, current);
}
-asmlinkage void
-default_trap_handler(struct pt_regs * regs, long interruption_code)
+static void default_trap_handler(struct pt_regs * regs, long interruption_code)
{
if (regs->psw.mask & PSW_MASK_PSTATE) {
local_irq_enable();
}
#define DO_ERROR_INFO(signr, str, name, sicode, siaddr) \
-asmlinkage void name(struct pt_regs * regs, long interruption_code) \
+static void name(struct pt_regs * regs, long interruption_code) \
{ \
siginfo_t info; \
info.si_signo = signr; \
"floating point exception", regs, &si);
}
-asmlinkage void illegal_op(struct pt_regs * regs, long interruption_code)
+static void illegal_op(struct pt_regs * regs, long interruption_code)
{
siginfo_t info;
__u8 opcode[6];
#endif
} else
signal = SIGILL;
- } else
- signal = SIGILL;
+ } else {
+ /*
+ * If we get an illegal op in kernel mode, send it through the
+ * kprobes notifier. If kprobes doesn't pick it up, SIGILL
+ */
+ if (notify_die(DIE_BPT, "bpt", regs, interruption_code,
+ 3, SIGTRAP) != NOTIFY_STOP)
+ signal = SIGILL;
+ }
#ifdef CONFIG_MATHEMU
if (signal == SIGFPE)
ILL_ILLOPN, get_check_address(regs));
#endif
-asmlinkage void data_exception(struct pt_regs * regs, long interruption_code)
+static void data_exception(struct pt_regs * regs, long interruption_code)
{
__u16 __user *location;
int signal = 0;
}
}
-asmlinkage void space_switch_exception(struct pt_regs * regs, long int_code)
+static void space_switch_exception(struct pt_regs * regs, long int_code)
{
siginfo_t info;
_etext = .; /* End of text section */
- . = ALIGN(16); /* Exception table */
- __start___ex_table = .;
- __ex_table : { *(__ex_table) }
- __stop___ex_table = .;
-
RODATA
#ifdef CONFIG_SHARED_KERNEL
. = ALIGN(1048576); /* VM shared segments are 1MB aligned */
+#endif
+ . = ALIGN(4096);
_eshared = .; /* End of shareable data */
-#endif
+
+ . = ALIGN(16); /* Exception table */
+ __start___ex_table = .;
+ __ex_table : { *(__ex_table) }
+ __stop___ex_table = .;
.data : { /* Data */
*(.data)
#include <asm/irq_regs.h>
static ext_int_info_t ext_int_info_timer;
-DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
+static DEFINE_PER_CPU(struct vtimer_queue, virt_cpu_timer);
#ifdef CONFIG_VIRT_CPU_ACCOUNTING
/*
void init_cpu_vtimer(void)
{
struct vtimer_queue *vt_list;
- unsigned long cr0;
/* kick the virtual timer */
S390_lowcore.exit_timer = VTIMER_MAX_SLICE;
S390_lowcore.last_update_timer = VTIMER_MAX_SLICE;
asm volatile ("SPT %0" : : "m" (S390_lowcore.last_update_timer));
asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock));
- __ctl_store(cr0, 0, 0);
- cr0 |= 0x400;
- __ctl_load(cr0, 0, 0);
+
+ /* enable cpu timer interrupts */
+ __ctl_set_bit(0,10);
vt_list = &per_cpu(virt_cpu_timer, smp_processor_id());
INIT_LIST_HEAD(&vt_list->list);
if (register_idle_notifier(&vtimer_idle_nb))
panic("Couldn't register idle notifier");
+ /* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
}
EXTRA_AFLAGS := -traditional
-lib-y += delay.o string.o uaccess_std.o uaccess_pt.o
+lib-y += delay.o string.o uaccess_std.o uaccess_pt.o qrnnd.o
lib-$(CONFIG_32BIT) += div64.o
lib-$(CONFIG_64BIT) += uaccess_mvcos.o
lib-$(CONFIG_SMP) += spinlock.o
/*
- * arch/s390/kernel/delay.c
+ * arch/s390/lib/delay.c
* Precise Delay Loops for S390
*
* S390 version
#include <linux/sched.h>
#include <linux/delay.h>
-
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
+#include <linux/timex.h>
+#include <linux/irqflags.h>
void __delay(unsigned long loops)
{
}
/*
- * Waits for 'usecs' microseconds using the tod clock, giving up the time slice
- * of the virtual PU inbetween to avoid congestion.
+ * Waits for 'usecs' microseconds using the TOD clock comparator.
*/
void __udelay(unsigned long usecs)
{
- uint64_t start_cc;
+ u64 end, time, jiffy_timer = 0;
+ unsigned long flags, cr0, mask, dummy;
+
+ local_irq_save(flags);
+ if (raw_irqs_disabled_flags(flags)) {
+ jiffy_timer = S390_lowcore.jiffy_timer;
+ S390_lowcore.jiffy_timer = -1ULL - (4096 << 12);
+ __ctl_store(cr0, 0, 0);
+ dummy = (cr0 & 0xffff00e0) | 0x00000800;
+ __ctl_load(dummy , 0, 0);
+ mask = psw_kernel_bits | PSW_MASK_WAIT | PSW_MASK_EXT;
+ } else
+ mask = psw_kernel_bits | PSW_MASK_WAIT |
+ PSW_MASK_EXT | PSW_MASK_IO;
+
+ end = get_clock() + ((u64) usecs << 12);
+ do {
+ time = end < S390_lowcore.jiffy_timer ?
+ end : S390_lowcore.jiffy_timer;
+ set_clock_comparator(time);
+ trace_hardirqs_on();
+ __load_psw_mask(mask);
+ local_irq_disable();
+ } while (get_clock() < end);
- if (usecs == 0)
- return;
- start_cc = get_clock();
- do {
- cpu_relax();
- } while (((get_clock() - start_cc)/4096) < usecs);
+ if (raw_irqs_disabled_flags(flags)) {
+ __ctl_load(cr0, 0, 0);
+ S390_lowcore.jiffy_timer = jiffy_timer;
+ }
+ set_clock_comparator(S390_lowcore.jiffy_timer);
+ local_irq_restore(flags);
}
--- /dev/null
+# S/390 __udiv_qrnnd
+
+# r2 : &__r
+# r3 : upper half of 64 bit word n
+# r4 : lower half of 64 bit word n
+# r5 : divisor d
+# the reminder r of the division is to be stored to &__r and
+# the quotient q is to be returned
+
+ .text
+ .globl __udiv_qrnnd
+__udiv_qrnnd:
+ st %r2,24(%r15) # store pointer to reminder for later
+ lr %r0,%r3 # reload n
+ lr %r1,%r4
+ ltr %r2,%r5 # reload and test divisor
+ jp 5f
+ # divisor >= 0x80000000
+ srdl %r0,2 # n/4
+ srl %r2,1 # d/2
+ slr %r1,%r2 # special case if last bit of d is set
+ brc 3,0f # (n/4) div (n/2) can overflow by 1
+ ahi %r0,-1 # trick: subtract n/2, then divide
+0: dr %r0,%r2 # signed division
+ ahi %r1,1 # trick part 2: add 1 to the quotient
+ # now (n >> 2) = (d >> 1) * %r1 + %r0
+ lhi %r3,1
+ nr %r3,%r1 # test last bit of q
+ jz 1f
+ alr %r0,%r2 # add (d>>1) to r
+1: srl %r1,1 # q >>= 1
+ # now (n >> 2) = (d&-2) * %r1 + %r0
+ lhi %r3,1
+ nr %r3,%r5 # test last bit of d
+ jz 2f
+ slr %r0,%r1 # r -= q
+ brc 3,2f # borrow ?
+ alr %r0,%r5 # r += d
+ ahi %r1,-1
+2: # now (n >> 2) = d * %r1 + %r0
+ alr %r1,%r1 # q <<= 1
+ alr %r0,%r0 # r <<= 1
+ brc 12,3f # overflow on r ?
+ slr %r0,%r5 # r -= d
+ ahi %r1,1 # q += 1
+3: lhi %r3,2
+ nr %r3,%r4 # test next to last bit of n
+ jz 4f
+ ahi %r0,1 # r += 1
+4: clr %r0,%r5 # r >= d ?
+ jl 6f
+ slr %r0,%r5 # r -= d
+ ahi %r1,1 # q += 1
+ # now (n >> 1) = d * %r1 + %r0
+ j 6f
+5: # divisor < 0x80000000
+ srdl %r0,1
+ dr %r0,%r2 # signed division
+ # now (n >> 1) = d * %r1 + %r0
+6: alr %r1,%r1 # q <<= 1
+ alr %r0,%r0 # r <<= 1
+ brc 12,7f # overflow on r ?
+ slr %r0,%r5 # r -= d
+ ahi %r1,1 # q += 1
+7: lhi %r3,1
+ nr %r3,%r4 # isolate last bit of n
+ alr %r0,%r3 # r += (n & 1)
+ clr %r0,%r5 # r >= d ?
+ jl 8f
+ slr %r0,%r5 # r -= d
+ ahi %r1,1 # q += 1
+8: # now n = d * %r1 + %r0
+ l %r2,24(%r15)
+ st %r0,0(%r2)
+ lr %r2,%r1
+ br %r14
+ .end __udiv_qrnnd
--- /dev/null
+/*
+ * arch/s390/uaccess.h
+ *
+ * Copyright IBM Corp. 2007
+ *
+ */
+
+#ifndef __ARCH_S390_LIB_UACCESS_H
+#define __ARCH_S390_LIB_UACCESS_H
+
+extern size_t copy_from_user_std(size_t, const void __user *, void *);
+extern size_t copy_to_user_std(size_t, void __user *, const void *);
+extern size_t strnlen_user_std(size_t, const char __user *);
+extern size_t strncpy_from_user_std(size_t, const char __user *, char *);
+extern int futex_atomic_cmpxchg_std(int __user *, int, int);
+extern int futex_atomic_op_std(int, int __user *, int, int *);
+
+extern size_t copy_from_user_pt(size_t, const void __user *, void *);
+extern size_t copy_to_user_pt(size_t, void __user *, const void *);
+extern int futex_atomic_op_pt(int, int __user *, int, int *);
+extern int futex_atomic_cmpxchg_pt(int __user *, int, int);
+
+#endif /* __ARCH_S390_LIB_UACCESS_H */
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/futex.h>
+#include "uaccess.h"
#ifndef __s390x__
#define AHI "ahi"
#define SLR "slgr"
#endif
-extern size_t copy_from_user_std(size_t, const void __user *, void *);
-extern size_t copy_to_user_std(size_t, void __user *, const void *);
-
-size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
+static size_t copy_from_user_mvcos(size_t size, const void __user *ptr, void *x)
{
register unsigned long reg0 asm("0") = 0x81UL;
unsigned long tmp1, tmp2;
return size;
}
-size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x)
+static size_t copy_from_user_mvcos_check(size_t size, const void __user *ptr, void *x)
{
if (size <= 256)
return copy_from_user_std(size, ptr, x);
return copy_from_user_mvcos(size, ptr, x);
}
-size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
+static size_t copy_to_user_mvcos(size_t size, void __user *ptr, const void *x)
{
register unsigned long reg0 asm("0") = 0x810000UL;
unsigned long tmp1, tmp2;
return size;
}
-size_t copy_to_user_mvcos_check(size_t size, void __user *ptr, const void *x)
+static size_t copy_to_user_mvcos_check(size_t size, void __user *ptr,
+ const void *x)
{
if (size <= 256)
return copy_to_user_std(size, ptr, x);
return copy_to_user_mvcos(size, ptr, x);
}
-size_t copy_in_user_mvcos(size_t size, void __user *to, const void __user *from)
+static size_t copy_in_user_mvcos(size_t size, void __user *to,
+ const void __user *from)
{
register unsigned long reg0 asm("0") = 0x810081UL;
unsigned long tmp1, tmp2;
return size;
}
-size_t clear_user_mvcos(size_t size, void __user *to)
+static size_t clear_user_mvcos(size_t size, void __user *to)
{
register unsigned long reg0 asm("0") = 0x810000UL;
unsigned long tmp1, tmp2;
return size;
}
-extern size_t strnlen_user_std(size_t, const char __user *);
-extern size_t strncpy_from_user_std(size_t, const char __user *, char *);
-extern int futex_atomic_op(int, int __user *, int, int *);
-extern int futex_atomic_cmpxchg(int __user *, int, int);
+static size_t strnlen_user_mvcos(size_t count, const char __user *src)
+{
+ char buf[256];
+ int rc;
+ size_t done, len, len_str;
+
+ done = 0;
+ do {
+ len = min(count - done, (size_t) 256);
+ rc = uaccess.copy_from_user(len, src + done, buf);
+ if (unlikely(rc == len))
+ return 0;
+ len -= rc;
+ len_str = strnlen(buf, len);
+ done += len_str;
+ } while ((len_str == len) && (done < count));
+ return done + 1;
+}
+
+static size_t strncpy_from_user_mvcos(size_t count, const char __user *src,
+ char *dst)
+{
+ int rc;
+ size_t done, len, len_str;
+
+ done = 0;
+ do {
+ len = min(count - done, (size_t) 4096);
+ rc = uaccess.copy_from_user(len, src + done, dst);
+ if (unlikely(rc == len))
+ return -EFAULT;
+ len -= rc;
+ len_str = strnlen(dst, len);
+ done += len_str;
+ } while ((len_str == len) && (done < count));
+ return done;
+}
struct uaccess_ops uaccess_mvcos = {
.copy_from_user = copy_from_user_mvcos_check,
.clear_user = clear_user_mvcos,
.strnlen_user = strnlen_user_std,
.strncpy_from_user = strncpy_from_user_std,
- .futex_atomic_op = futex_atomic_op,
- .futex_atomic_cmpxchg = futex_atomic_cmpxchg,
+ .futex_atomic_op = futex_atomic_op_std,
+ .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
+};
+
+#ifdef CONFIG_S390_SWITCH_AMODE
+struct uaccess_ops uaccess_mvcos_switch = {
+ .copy_from_user = copy_from_user_mvcos,
+ .copy_from_user_small = copy_from_user_mvcos,
+ .copy_to_user = copy_to_user_mvcos,
+ .copy_to_user_small = copy_to_user_mvcos,
+ .copy_in_user = copy_in_user_mvcos,
+ .clear_user = clear_user_mvcos,
+ .strnlen_user = strnlen_user_mvcos,
+ .strncpy_from_user = strncpy_from_user_mvcos,
+ .futex_atomic_op = futex_atomic_op_pt,
+ .futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt,
};
+#endif
/*
* arch/s390/lib/uaccess_pt.c
*
- * User access functions based on page table walks.
+ * User access functions based on page table walks for enhanced
+ * system layout without hardware support.
*
* Copyright IBM Corp. 2006
* Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com)
#include <linux/mm.h>
#include <asm/uaccess.h>
#include <asm/futex.h>
+#include "uaccess.h"
-static inline int __handle_fault(struct mm_struct *mm, unsigned long address,
- int write_access)
+static int __handle_fault(struct mm_struct *mm, unsigned long address,
+ int write_access)
{
struct vm_area_struct *vma;
int ret = -EFAULT;
return ret;
}
-static inline size_t __user_copy_pt(unsigned long uaddr, void *kptr,
- size_t n, int write_user)
+static size_t __user_copy_pt(unsigned long uaddr, void *kptr,
+ size_t n, int write_user)
{
struct mm_struct *mm = current->mm;
unsigned long offset, pfn, done, size;
goto retry;
}
+/*
+ * Do DAT for user address by page table walk, return kernel address.
+ * This function needs to be called with current->mm->page_table_lock held.
+ */
+static unsigned long __dat_user_addr(unsigned long uaddr)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long pfn, ret;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ int rc;
+
+ ret = 0;
+retry:
+ pgd = pgd_offset(mm, uaddr);
+ if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
+ goto fault;
+
+ pmd = pmd_offset(pgd, uaddr);
+ if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+ goto fault;
+
+ pte = pte_offset_map(pmd, uaddr);
+ if (!pte || !pte_present(*pte))
+ goto fault;
+
+ pfn = pte_pfn(*pte);
+ if (!pfn_valid(pfn))
+ goto out;
+
+ ret = (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1));
+out:
+ return ret;
+fault:
+ spin_unlock(&mm->page_table_lock);
+ rc = __handle_fault(mm, uaddr, 0);
+ spin_lock(&mm->page_table_lock);
+ if (rc)
+ goto out;
+ goto retry;
+}
+
size_t copy_from_user_pt(size_t n, const void __user *from, void *to)
{
size_t rc;
}
return __user_copy_pt((unsigned long) to, (void *) from, n, 1);
}
+
+static size_t clear_user_pt(size_t n, void __user *to)
+{
+ long done, size, ret;
+
+ if (segment_eq(get_fs(), KERNEL_DS)) {
+ memset((void __kernel __force *) to, 0, n);
+ return 0;
+ }
+ done = 0;
+ do {
+ if (n - done > PAGE_SIZE)
+ size = PAGE_SIZE;
+ else
+ size = n - done;
+ ret = __user_copy_pt((unsigned long) to + done,
+ &empty_zero_page, size, 1);
+ done += size;
+ if (ret)
+ return ret + n - done;
+ } while (done < n);
+ return 0;
+}
+
+static size_t strnlen_user_pt(size_t count, const char __user *src)
+{
+ char *addr;
+ unsigned long uaddr = (unsigned long) src;
+ struct mm_struct *mm = current->mm;
+ unsigned long offset, pfn, done, len;
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ size_t len_str;
+
+ if (segment_eq(get_fs(), KERNEL_DS))
+ return strnlen((const char __kernel __force *) src, count) + 1;
+ done = 0;
+retry:
+ spin_lock(&mm->page_table_lock);
+ do {
+ pgd = pgd_offset(mm, uaddr);
+ if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
+ goto fault;
+
+ pmd = pmd_offset(pgd, uaddr);
+ if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+ goto fault;
+
+ pte = pte_offset_map(pmd, uaddr);
+ if (!pte || !pte_present(*pte))
+ goto fault;
+
+ pfn = pte_pfn(*pte);
+ if (!pfn_valid(pfn)) {
+ done = -1;
+ goto out;
+ }
+
+ offset = uaddr & (PAGE_SIZE-1);
+ addr = (char *)(pfn << PAGE_SHIFT) + offset;
+ len = min(count - done, PAGE_SIZE - offset);
+ len_str = strnlen(addr, len);
+ done += len_str;
+ uaddr += len_str;
+ } while ((len_str == len) && (done < count));
+out:
+ spin_unlock(&mm->page_table_lock);
+ return done + 1;
+fault:
+ spin_unlock(&mm->page_table_lock);
+ if (__handle_fault(mm, uaddr, 0)) {
+ return 0;
+ }
+ goto retry;
+}
+
+static size_t strncpy_from_user_pt(size_t count, const char __user *src,
+ char *dst)
+{
+ size_t n = strnlen_user_pt(count, src);
+
+ if (!n)
+ return -EFAULT;
+ if (n > count)
+ n = count;
+ if (segment_eq(get_fs(), KERNEL_DS)) {
+ memcpy(dst, (const char __kernel __force *) src, n);
+ if (dst[n-1] == '\0')
+ return n-1;
+ else
+ return n;
+ }
+ if (__user_copy_pt((unsigned long) src, dst, n, 0))
+ return -EFAULT;
+ if (dst[n-1] == '\0')
+ return n-1;
+ else
+ return n;
+}
+
+static size_t copy_in_user_pt(size_t n, void __user *to,
+ const void __user *from)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to,
+ uaddr, done, size;
+ unsigned long uaddr_from = (unsigned long) from;
+ unsigned long uaddr_to = (unsigned long) to;
+ pgd_t *pgd_from, *pgd_to;
+ pmd_t *pmd_from, *pmd_to;
+ pte_t *pte_from, *pte_to;
+ int write_user;
+
+ done = 0;
+retry:
+ spin_lock(&mm->page_table_lock);
+ do {
+ pgd_from = pgd_offset(mm, uaddr_from);
+ if (pgd_none(*pgd_from) || unlikely(pgd_bad(*pgd_from))) {
+ uaddr = uaddr_from;
+ write_user = 0;
+ goto fault;
+ }
+ pgd_to = pgd_offset(mm, uaddr_to);
+ if (pgd_none(*pgd_to) || unlikely(pgd_bad(*pgd_to))) {
+ uaddr = uaddr_to;
+ write_user = 1;
+ goto fault;
+ }
+
+ pmd_from = pmd_offset(pgd_from, uaddr_from);
+ if (pmd_none(*pmd_from) || unlikely(pmd_bad(*pmd_from))) {
+ uaddr = uaddr_from;
+ write_user = 0;
+ goto fault;
+ }
+ pmd_to = pmd_offset(pgd_to, uaddr_to);
+ if (pmd_none(*pmd_to) || unlikely(pmd_bad(*pmd_to))) {
+ uaddr = uaddr_to;
+ write_user = 1;
+ goto fault;
+ }
+
+ pte_from = pte_offset_map(pmd_from, uaddr_from);
+ if (!pte_from || !pte_present(*pte_from)) {
+ uaddr = uaddr_from;
+ write_user = 0;
+ goto fault;
+ }
+ pte_to = pte_offset_map(pmd_to, uaddr_to);
+ if (!pte_to || !pte_present(*pte_to) || !pte_write(*pte_to)) {
+ uaddr = uaddr_to;
+ write_user = 1;
+ goto fault;
+ }
+
+ pfn_from = pte_pfn(*pte_from);
+ if (!pfn_valid(pfn_from))
+ goto out;
+ pfn_to = pte_pfn(*pte_to);
+ if (!pfn_valid(pfn_to))
+ goto out;
+
+ offset_from = uaddr_from & (PAGE_SIZE-1);
+ offset_to = uaddr_from & (PAGE_SIZE-1);
+ offset_max = max(offset_from, offset_to);
+ size = min(n - done, PAGE_SIZE - offset_max);
+
+ memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to,
+ (void *)(pfn_from << PAGE_SHIFT) + offset_from, size);
+ done += size;
+ uaddr_from += size;
+ uaddr_to += size;
+ } while (done < n);
+out:
+ spin_unlock(&mm->page_table_lock);
+ return n - done;
+fault:
+ spin_unlock(&mm->page_table_lock);
+ if (__handle_fault(mm, uaddr, write_user))
+ return n - done;
+ goto retry;
+}
+
+#define __futex_atomic_op(insn, ret, oldval, newval, uaddr, oparg) \
+ asm volatile("0: l %1,0(%6)\n" \
+ "1: " insn \
+ "2: cs %1,%2,0(%6)\n" \
+ "3: jl 1b\n" \
+ " lhi %0,0\n" \
+ "4:\n" \
+ EX_TABLE(0b,4b) EX_TABLE(2b,4b) EX_TABLE(3b,4b) \
+ : "=d" (ret), "=&d" (oldval), "=&d" (newval), \
+ "=m" (*uaddr) \
+ : "0" (-EFAULT), "d" (oparg), "a" (uaddr), \
+ "m" (*uaddr) : "cc" );
+
+int futex_atomic_op_pt(int op, int __user *uaddr, int oparg, int *old)
+{
+ int oldval = 0, newval, ret;
+
+ spin_lock(¤t->mm->page_table_lock);
+ uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+ if (!uaddr) {
+ spin_unlock(¤t->mm->page_table_lock);
+ return -EFAULT;
+ }
+ get_page(virt_to_page(uaddr));
+ spin_unlock(¤t->mm->page_table_lock);
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("lr %2,%5\n",
+ ret, oldval, newval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("lr %2,%1\nar %2,%5\n",
+ ret, oldval, newval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("lr %2,%1\nor %2,%5\n",
+ ret, oldval, newval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("lr %2,%1\nnr %2,%5\n",
+ ret, oldval, newval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("lr %2,%1\nxr %2,%5\n",
+ ret, oldval, newval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+ put_page(virt_to_page(uaddr));
+ *old = oldval;
+ return ret;
+}
+
+int futex_atomic_cmpxchg_pt(int __user *uaddr, int oldval, int newval)
+{
+ int ret;
+
+ spin_lock(¤t->mm->page_table_lock);
+ uaddr = (int __user *) __dat_user_addr((unsigned long) uaddr);
+ if (!uaddr) {
+ spin_unlock(¤t->mm->page_table_lock);
+ return -EFAULT;
+ }
+ get_page(virt_to_page(uaddr));
+ spin_unlock(¤t->mm->page_table_lock);
+ asm volatile(" cs %1,%4,0(%5)\n"
+ "0: lr %0,%1\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "=d" (ret), "+d" (oldval), "=m" (*uaddr)
+ : "0" (-EFAULT), "d" (newval), "a" (uaddr), "m" (*uaddr)
+ : "cc", "memory" );
+ put_page(virt_to_page(uaddr));
+ return ret;
+}
+
+struct uaccess_ops uaccess_pt = {
+ .copy_from_user = copy_from_user_pt,
+ .copy_from_user_small = copy_from_user_pt,
+ .copy_to_user = copy_to_user_pt,
+ .copy_to_user_small = copy_to_user_pt,
+ .copy_in_user = copy_in_user_pt,
+ .clear_user = clear_user_pt,
+ .strnlen_user = strnlen_user_pt,
+ .strncpy_from_user = strncpy_from_user_pt,
+ .futex_atomic_op = futex_atomic_op_pt,
+ .futex_atomic_cmpxchg = futex_atomic_cmpxchg_pt,
+};
#include <linux/mm.h>
#include <linux/uaccess.h>
#include <asm/futex.h>
+#include "uaccess.h"
#ifndef __s390x__
#define AHI "ahi"
#define SLR "slgr"
#endif
-extern size_t copy_from_user_pt(size_t n, const void __user *from, void *to);
-extern size_t copy_to_user_pt(size_t n, void __user *to, const void *from);
-
size_t copy_from_user_std(size_t size, const void __user *ptr, void *x)
{
unsigned long tmp1, tmp2;
return size;
}
-size_t copy_from_user_std_check(size_t size, const void __user *ptr, void *x)
+static size_t copy_from_user_std_check(size_t size, const void __user *ptr,
+ void *x)
{
if (size <= 1024)
return copy_from_user_std(size, ptr, x);
return size;
}
-size_t copy_to_user_std_check(size_t size, void __user *ptr, const void *x)
+static size_t copy_to_user_std_check(size_t size, void __user *ptr,
+ const void *x)
{
if (size <= 1024)
return copy_to_user_std(size, ptr, x);
return copy_to_user_pt(size, ptr, x);
}
-size_t copy_in_user_std(size_t size, void __user *to, const void __user *from)
+static size_t copy_in_user_std(size_t size, void __user *to,
+ const void __user *from)
{
unsigned long tmp1;
return size;
}
-size_t clear_user_std(size_t size, void __user *to)
+static size_t clear_user_std(size_t size, void __user *to)
{
unsigned long tmp1, tmp2;
: "0" (-EFAULT), "d" (oparg), "a" (uaddr), \
"m" (*uaddr) : "cc");
-int futex_atomic_op(int op, int __user *uaddr, int oparg, int *old)
+int futex_atomic_op_std(int op, int __user *uaddr, int oparg, int *old)
{
int oldval = 0, newval, ret;
return ret;
}
-int futex_atomic_cmpxchg(int __user *uaddr, int oldval, int newval)
+int futex_atomic_cmpxchg_std(int __user *uaddr, int oldval, int newval)
{
int ret;
.clear_user = clear_user_std,
.strnlen_user = strnlen_user_std,
.strncpy_from_user = strncpy_from_user_std,
- .futex_atomic_op = futex_atomic_op,
- .futex_atomic_cmpxchg = futex_atomic_cmpxchg,
+ .futex_atomic_op = futex_atomic_op_std,
+ .futex_atomic_cmpxchg = futex_atomic_cmpxchg_std,
};
# Makefile for the FPU instruction emulation.
#
-obj-$(CONFIG_MATHEMU) := math.o qrnnd.o
+obj-$(CONFIG_MATHEMU) := math.o
EXTRA_CFLAGS := -I$(src) -Iinclude/math-emu -w
EXTRA_AFLAGS := -traditional
#include <asm/uaccess.h>
#include <asm/lowcore.h>
-#include "sfp-util.h"
+#include <asm/sfp-util.h>
#include <math-emu/soft-fp.h>
#include <math-emu/single.h>
#include <math-emu/double.h>
+++ /dev/null
-# S/390 __udiv_qrnnd
-
-# r2 : &__r
-# r3 : upper half of 64 bit word n
-# r4 : lower half of 64 bit word n
-# r5 : divisor d
-# the reminder r of the division is to be stored to &__r and
-# the quotient q is to be returned
-
- .text
- .globl __udiv_qrnnd
-__udiv_qrnnd:
- st %r2,24(%r15) # store pointer to reminder for later
- lr %r0,%r3 # reload n
- lr %r1,%r4
- ltr %r2,%r5 # reload and test divisor
- jp 5f
- # divisor >= 0x80000000
- srdl %r0,2 # n/4
- srl %r2,1 # d/2
- slr %r1,%r2 # special case if last bit of d is set
- brc 3,0f # (n/4) div (n/2) can overflow by 1
- ahi %r0,-1 # trick: subtract n/2, then divide
-0: dr %r0,%r2 # signed division
- ahi %r1,1 # trick part 2: add 1 to the quotient
- # now (n >> 2) = (d >> 1) * %r1 + %r0
- lhi %r3,1
- nr %r3,%r1 # test last bit of q
- jz 1f
- alr %r0,%r2 # add (d>>1) to r
-1: srl %r1,1 # q >>= 1
- # now (n >> 2) = (d&-2) * %r1 + %r0
- lhi %r3,1
- nr %r3,%r5 # test last bit of d
- jz 2f
- slr %r0,%r1 # r -= q
- brc 3,2f # borrow ?
- alr %r0,%r5 # r += d
- ahi %r1,-1
-2: # now (n >> 2) = d * %r1 + %r0
- alr %r1,%r1 # q <<= 1
- alr %r0,%r0 # r <<= 1
- brc 12,3f # overflow on r ?
- slr %r0,%r5 # r -= d
- ahi %r1,1 # q += 1
-3: lhi %r3,2
- nr %r3,%r4 # test next to last bit of n
- jz 4f
- ahi %r0,1 # r += 1
-4: clr %r0,%r5 # r >= d ?
- jl 6f
- slr %r0,%r5 # r -= d
- ahi %r1,1 # q += 1
- # now (n >> 1) = d * %r1 + %r0
- j 6f
-5: # divisor < 0x80000000
- srdl %r0,1
- dr %r0,%r2 # signed division
- # now (n >> 1) = d * %r1 + %r0
-6: alr %r1,%r1 # q <<= 1
- alr %r0,%r0 # r <<= 1
- brc 12,7f # overflow on r ?
- slr %r0,%r5 # r -= d
- ahi %r1,1 # q += 1
-7: lhi %r3,1
- nr %r3,%r4 # isolate last bit of n
- alr %r0,%r3 # r += (n & 1)
- clr %r0,%r5 # r >= d ?
- jl 8f
- slr %r0,%r5 # r -= d
- ahi %r1,1 # q += 1
-8: # now n = d * %r1 + %r0
- l %r2,24(%r15)
- st %r0,0(%r2)
- lr %r2,%r1
- br %r14
- .end __udiv_qrnnd
+++ /dev/null
-#include <linux/kernel.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <asm/byteorder.h>
-
-#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \
- unsigned int __sh = (ah); \
- unsigned int __sl = (al); \
- asm volatile( \
- " alr %1,%3\n" \
- " brc 12,0f\n" \
- " ahi %0,1\n" \
- "0: alr %0,%2" \
- : "+&d" (__sh), "+d" (__sl) \
- : "d" (bh), "d" (bl) : "cc"); \
- (sh) = __sh; \
- (sl) = __sl; \
-})
-
-#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \
- unsigned int __sh = (ah); \
- unsigned int __sl = (al); \
- asm volatile( \
- " slr %1,%3\n" \
- " brc 3,0f\n" \
- " ahi %0,-1\n" \
- "0: slr %0,%2" \
- : "+&d" (__sh), "+d" (__sl) \
- : "d" (bh), "d" (bl) : "cc"); \
- (sh) = __sh; \
- (sl) = __sl; \
-})
-
-/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */
-#define umul_ppmm(wh, wl, u, v) ({ \
- unsigned int __wh = u; \
- unsigned int __wl = v; \
- asm volatile( \
- " ltr 1,%0\n" \
- " mr 0,%1\n" \
- " jnm 0f\n" \
- " alr 0,%1\n" \
- "0: ltr %1,%1\n" \
- " jnm 1f\n" \
- " alr 0,%0\n" \
- "1: lr %0,0\n" \
- " lr %1,1\n" \
- : "+d" (__wh), "+d" (__wl) \
- : : "0", "1", "cc"); \
- wh = __wh; \
- wl = __wl; \
-})
-
-#define udiv_qrnnd(q, r, n1, n0, d) \
- do { unsigned long __r; \
- (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \
- (r) = __r; \
- } while (0)
-extern unsigned long __udiv_qrnnd (unsigned long *, unsigned long,
- unsigned long , unsigned long);
-
-#define UDIV_NEEDS_NORMALIZATION 0
-
-#define abort() return 0
-
-#define __BYTE_ORDER __BIG_ENDIAN
cmm_set_timer();
}
-static inline int
+static int
cmm_skip_blanks(char *cp, char **endp)
{
char *str;
}
#endif
-struct ctl_table_header *cmm_sysctl_header;
+static struct ctl_table_header *cmm_sysctl_header;
static int
cmm_init (void)
#include <linux/module.h>
#include <linux/bootmem.h>
#include <linux/ctype.h>
+#include <linux/ioport.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/ebcdic.h>
struct dcss_segment {
struct list_head list;
char dcss_name[8];
+ char res_name[15];
unsigned long start_addr;
unsigned long end;
atomic_t ref_count;
unsigned int vm_segtype;
struct qrange range[6];
int segcnt;
+ struct resource *res;
};
static DEFINE_MUTEX(dcss_lock);
* Create the 8 bytes, ebcdic VM segment name from
* an ascii name.
*/
-static void inline
+static void
dcss_mkname(char *name, char *dcss_name)
{
int i;
goto out_free;
}
+ seg->res = kzalloc(sizeof(struct resource), GFP_KERNEL);
+ if (seg->res == NULL) {
+ rc = -ENOMEM;
+ goto out_shared;
+ }
+ seg->res->flags = IORESOURCE_BUSY | IORESOURCE_MEM;
+ seg->res->start = seg->start_addr;
+ seg->res->end = seg->end;
+ memcpy(&seg->res_name, seg->dcss_name, 8);
+ EBCASC(seg->res_name, 8);
+ seg->res_name[8] = '\0';
+ strncat(seg->res_name, " (DCSS)", 7);
+ seg->res->name = seg->res_name;
+ rc = seg->vm_segtype;
+ if (rc == SEG_TYPE_SC ||
+ ((rc == SEG_TYPE_SR || rc == SEG_TYPE_ER) && !do_nonshared))
+ seg->res->flags |= IORESOURCE_READONLY;
+ if (request_resource(&iomem_resource, seg->res)) {
+ rc = -EBUSY;
+ kfree(seg->res);
+ goto out_shared;
+ }
+
if (do_nonshared)
dcss_command = DCSS_LOADNSR;
else
rc = dcss_diag_translate_rc (seg->end);
dcss_diag(DCSS_PURGESEG, seg->dcss_name,
&seg->start_addr, &seg->end);
- goto out_shared;
+ goto out_resource;
}
seg->do_nonshared = do_nonshared;
atomic_set(&seg->ref_count, 1);
list_add(&seg->list, &dcss_list);
- rc = seg->vm_segtype;
*addr = seg->start_addr;
*end = seg->end;
if (do_nonshared)
"type %s in non-shared mode\n", name,
(void*)seg->start_addr, (void*)seg->end,
segtype_string[seg->vm_segtype]);
- else
+ else {
PRINT_INFO ("segment_load: loaded segment %s range %p .. %p "
"type %s in shared mode\n", name,
(void*)seg->start_addr, (void*)seg->end,
segtype_string[seg->vm_segtype]);
+ }
goto out;
+ out_resource:
+ release_resource(seg->res);
+ kfree(seg->res);
out_shared:
remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
out_free:
* -ENOENT : no such segment (segment gone!)
* -EAGAIN : segment is in use by other exploiters, try later
* -EINVAL : no segment with the given name is currently loaded - name invalid
+ * -EBUSY : segment can temporarily not be used (overlaps with dcss)
* 0 : operation succeeded
*/
int
rc = -EAGAIN;
goto out_unlock;
}
- dcss_diag(DCSS_PURGESEG, seg->dcss_name,
- &dummy, &dummy);
- if (do_nonshared)
+ release_resource(seg->res);
+ if (do_nonshared) {
dcss_command = DCSS_LOADNSR;
- else
- dcss_command = DCSS_LOADNOLY;
+ seg->res->flags &= ~IORESOURCE_READONLY;
+ } else {
+ dcss_command = DCSS_LOADNOLY;
+ if (seg->vm_segtype == SEG_TYPE_SR ||
+ seg->vm_segtype == SEG_TYPE_ER)
+ seg->res->flags |= IORESOURCE_READONLY;
+ }
+ if (request_resource(&iomem_resource, seg->res)) {
+ PRINT_WARN("segment_modify_shared: could not reload segment %s"
+ " - overlapping resources\n", name);
+ rc = -EBUSY;
+ kfree(seg->res);
+ goto out_del;
+ }
+ dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
diag_cc = dcss_diag(dcss_command, seg->dcss_name,
&seg->start_addr, &seg->end);
if (diag_cc > 1) {
rc = 0;
goto out_unlock;
out_del:
+ remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
list_del(&seg->list);
- dcss_diag(DCSS_PURGESEG, seg->dcss_name,
- &dummy, &dummy);
+ dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
kfree(seg);
out_unlock:
mutex_unlock(&dcss_lock);
}
if (atomic_dec_return(&seg->ref_count) != 0)
goto out_unlock;
+ release_resource(seg->res);
+ kfree(seg->res);
remove_shared_memory(seg->start_addr, seg->end - seg->start_addr + 1);
list_del(&seg->list);
dcss_diag(DCSS_PURGESEG, seg->dcss_name, &dummy, &dummy);
extern void die(const char *,struct pt_regs *,long);
#ifdef CONFIG_KPROBES
-ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
+static ATOMIC_NOTIFIER_HEAD(notify_page_fault_chain);
int register_page_fault_notifier(struct notifier_block *nb)
{
return atomic_notifier_chain_register(¬ify_page_fault_chain, nb);
/*
* Check which address space the address belongs to.
- * Returns 1 for user space and 0 for kernel space.
+ * May return 1 or 2 for user space and 0 for kernel space.
+ * Returns 2 for user space in primary addressing mode with
+ * CONFIG_S390_EXEC_PROTECT on and kernel parameter noexec=on.
*/
static inline int check_user_space(struct pt_regs *regs, int error_code)
{
return __check_access_register(regs, error_code);
if (descriptor == 2)
return current->thread.mm_segment.ar4;
- return descriptor != 0;
+ return ((descriptor != 0) ^ (switch_amode)) << s390_noexec;
}
/*
force_sig_info(SIGSEGV, &si, current);
}
+#ifdef CONFIG_S390_EXEC_PROTECT
+extern long sys_sigreturn(struct pt_regs *regs);
+extern long sys_rt_sigreturn(struct pt_regs *regs);
+extern long sys32_sigreturn(struct pt_regs *regs);
+extern long sys32_rt_sigreturn(struct pt_regs *regs);
+
+static inline void do_sigreturn(struct mm_struct *mm, struct pt_regs *regs,
+ int rt)
+{
+ up_read(&mm->mmap_sem);
+ clear_tsk_thread_flag(current, TIF_SINGLE_STEP);
+#ifdef CONFIG_COMPAT
+ if (test_tsk_thread_flag(current, TIF_31BIT)) {
+ if (rt)
+ sys32_rt_sigreturn(regs);
+ else
+ sys32_sigreturn(regs);
+ return;
+ }
+#endif /* CONFIG_COMPAT */
+ if (rt)
+ sys_rt_sigreturn(regs);
+ else
+ sys_sigreturn(regs);
+ return;
+}
+
+static int signal_return(struct mm_struct *mm, struct pt_regs *regs,
+ unsigned long address, unsigned long error_code)
+{
+ pgd_t *pgd;
+ pmd_t *pmd;
+ pte_t *pte;
+ u16 *instruction;
+ unsigned long pfn, uaddr = regs->psw.addr;
+
+ spin_lock(&mm->page_table_lock);
+ pgd = pgd_offset(mm, uaddr);
+ if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd)))
+ goto out_fault;
+ pmd = pmd_offset(pgd, uaddr);
+ if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+ goto out_fault;
+ pte = pte_offset_map(pmd_offset(pgd_offset(mm, uaddr), uaddr), uaddr);
+ if (!pte || !pte_present(*pte))
+ goto out_fault;
+ pfn = pte_pfn(*pte);
+ if (!pfn_valid(pfn))
+ goto out_fault;
+ spin_unlock(&mm->page_table_lock);
+
+ instruction = (u16 *) ((pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE-1)));
+ if (*instruction == 0x0a77)
+ do_sigreturn(mm, regs, 0);
+ else if (*instruction == 0x0aad)
+ do_sigreturn(mm, regs, 1);
+ else {
+ printk("- XXX - do_exception: task = %s, primary, NO EXEC "
+ "-> SIGSEGV\n", current->comm);
+ up_read(&mm->mmap_sem);
+ current->thread.prot_addr = address;
+ current->thread.trap_no = error_code;
+ do_sigsegv(regs, error_code, SEGV_MAPERR, address);
+ }
+ return 0;
+out_fault:
+ spin_unlock(&mm->page_table_lock);
+ return -EFAULT;
+}
+#endif /* CONFIG_S390_EXEC_PROTECT */
+
/*
* This routine handles page faults. It determines the address,
* and the problem, and then passes it off to one of the appropriate
vma = find_vma(mm, address);
if (!vma)
goto bad_area;
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+ if (unlikely((user_address == 2) && !(vma->vm_flags & VM_EXEC)))
+ if (!signal_return(mm, regs, address, error_code))
+ /*
+ * signal_return() has done an up_read(&mm->mmap_sem)
+ * if it returns 0.
+ */
+ return;
+#endif
+
if (vma->vm_start <= address)
goto good_area;
if (!(vma->vm_flags & VM_GROWSDOWN))
: : "a" (&refbk), "m" (refbk) : "cc");
}
-asmlinkage void
-pfault_interrupt(__u16 error_code)
+static void pfault_interrupt(__u16 error_code)
{
struct task_struct *tsk;
__u16 subcode;
#include <linux/bootmem.h>
#include <linux/pfn.h>
#include <linux/poison.h>
-
+#include <linux/initrd.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/uaccess.h>
pte_t new_pte;
unsigned long address, end;
- address = ((unsigned long)&__start_rodata) & PAGE_MASK;
- end = PFN_ALIGN((unsigned long)&__end_rodata);
+ address = ((unsigned long)&_stext) & PAGE_MASK;
+ end = PFN_ALIGN((unsigned long)&_eshared);
for (; address < end; address += PAGE_SIZE) {
pgd = pgd_offset_k(address);
pmd = pmd_offset(pgd, address);
pte = pte_offset_kernel(pmd, address);
new_pte = mk_pte_phys(address, __pgprot(_PAGE_RO));
- set_pte(pte, new_pte);
+ *pte = new_pte;
}
}
-extern void vmem_map_init(void);
-
/*
* paging_init() sets up the page tables
*/
#ifdef CONFIG_64BIT
pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERN_REGION_TABLE;
for (i = 0; i < PTRS_PER_PGD; i++)
- pgd_clear(pg_dir + i);
+ pgd_clear_kernel(pg_dir + i);
#else
pgdir_k = (__pa(swapper_pg_dir) & PAGE_MASK) | _KERNSEG_TABLE;
for (i = 0; i < PTRS_PER_PGD; i++)
- pmd_clear((pmd_t *)(pg_dir + i));
+ pmd_clear_kernel((pmd_t *)(pg_dir + i));
#endif
vmem_map_init();
setup_ro_region();
datasize >>10,
initsize >> 10);
printk("Write protected kernel read-only data: %#lx - %#lx\n",
- (unsigned long)&__start_rodata,
- PFN_ALIGN((unsigned long)&__end_rodata) - 1);
- printk("Virtual memmap size: %ldk\n",
- (max_pfn * sizeof(struct page)) >> 10);
+ (unsigned long)&_stext,
+ PFN_ALIGN((unsigned long)&_eshared) - 1);
}
void free_initmem(void)
if (!pmd)
return NULL;
for (i = 0; i < PTRS_PER_PMD; i++)
- pmd_clear(pmd + i);
+ pmd_clear_kernel(pmd + i);
return pmd;
}
return NULL;
pte_val(empty_pte) = _PAGE_TYPE_EMPTY;
for (i = 0; i < PTRS_PER_PTE; i++)
- set_pte(pte + i, empty_pte);
+ pte[i] = empty_pte;
return pte;
}
pm_dir = vmem_pmd_alloc();
if (!pm_dir)
goto out;
- pgd_populate(&init_mm, pg_dir, pm_dir);
+ pgd_populate_kernel(&init_mm, pg_dir, pm_dir);
}
pm_dir = pmd_offset(pg_dir, address);
pt_dir = pte_offset_kernel(pm_dir, address);
pte = pfn_pte(address >> PAGE_SHIFT, PAGE_KERNEL);
- set_pte(pt_dir, pte);
+ *pt_dir = pte;
}
ret = 0;
out:
if (pmd_none(*pm_dir))
continue;
pt_dir = pte_offset_kernel(pm_dir, address);
- set_pte(pt_dir, pte);
+ *pt_dir = pte;
}
flush_tlb_kernel_range(start, start + size);
}
pm_dir = vmem_pmd_alloc();
if (!pm_dir)
goto out;
- pgd_populate(&init_mm, pg_dir, pm_dir);
+ pgd_populate_kernel(&init_mm, pg_dir, pm_dir);
}
pm_dir = pmd_offset(pg_dir, address);
if (!new_page)
goto out;
pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL);
- set_pte(pt_dir, pte);
+ *pt_dir = pte;
}
}
ret = 0;
static int nvidia_hpet_detected __initdata;
-static int __init nvidia_hpet_check(unsigned long phys, unsigned long size)
+static int __init nvidia_hpet_check(struct acpi_table_header *header)
{
nvidia_hpet_detected = 1;
return 0;
return;
nvidia_hpet_detected = 0;
- acpi_table_parse(ACPI_HPET, nvidia_hpet_check);
+ acpi_table_parse(ACPI_SIG_HPET, nvidia_hpet_check);
if (nvidia_hpet_detected == 0) {
acpi_skip_timer_override = 1;
printk(KERN_INFO "Nvidia board "
* Some x86_64 machines use physical APIC mode regardless of how many
* procs/clusters are present (x86_64 ES7000 is an example).
*/
- if (acpi_fadt.revision > FADT2_REVISION_ID)
- if (acpi_fadt.force_apic_physical_destination_mode) {
+ if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID)
+ if (acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL) {
genapic = &apic_cluster;
goto print;
}
.retrigger = ioapic_retrigger_irq,
};
-int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev)
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc)
{
struct msi_msg msg;
- int ret;
+ int irq, ret;
+ irq = create_irq();
+ if (irq < 0)
+ return irq;
+
+ set_irq_msi(irq, desc);
ret = msi_compose_msg(dev, irq, &msg);
- if (ret < 0)
+ if (ret < 0) {
+ destroy_irq(irq);
return ret;
+ }
write_msi_msg(irq, &msg);
set_irq_chip_and_handler_name(irq, &msi_chip, handle_edge_irq, "edge");
- return 0;
+ return irq;
}
void arch_teardown_msi_irq(unsigned int irq)
{
- return;
+ destroy_irq(irq);
}
#endif /* CONFIG_PCI_MSI */
return gsi;
/* Don't set up the ACPI SCI because it's already set up */
- if (acpi_fadt.sci_int == gsi)
+ if (acpi_gbl_FADT.sci_interrupt == gsi)
return gsi;
ioapic = mp_find_ioapic(gsi);
.dma_supported = NULL,
};
-void pci_swiotlb_init(void)
+void __init pci_swiotlb_init(void)
{
/* don't initialize swiotlb if iommu=off (no_iommu=1) */
if (!iommu_detected && !no_iommu && end_pfn > MAX_DMA32_PFN)
{
unsigned int year, mon, day, hour, min, sec;
unsigned long flags;
- unsigned extyear = 0;
+ unsigned century = 0;
spin_lock_irqsave(&rtc_lock, flags);
mon = CMOS_READ(RTC_MONTH);
year = CMOS_READ(RTC_YEAR);
#ifdef CONFIG_ACPI
- if (acpi_fadt.revision >= FADT2_REVISION_ID &&
- acpi_fadt.century)
- extyear = CMOS_READ(acpi_fadt.century);
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
+ acpi_gbl_FADT.century)
+ century = CMOS_READ(acpi_gbl_FADT.century);
#endif
} while (sec != CMOS_READ(RTC_SECONDS));
BCD_TO_BIN(mon);
BCD_TO_BIN(year);
- if (extyear) {
- BCD_TO_BIN(extyear);
- year += extyear;
- printk(KERN_INFO "Extended CMOS year: %d\n", extyear);
+ if (century) {
+ BCD_TO_BIN(century);
+ year += century * 100;
+ printk(KERN_INFO "Extended CMOS year: %d\n", century * 100);
} else {
/*
* x86-64 systems only exists since 2002.
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL) {
#ifdef CONFIG_ACPI
/* But TSC doesn't tick in C3 so don't use it there */
- if (acpi_fadt.length > 0 && acpi_fadt.plvl3_lat < 1000)
+ if (acpi_gbl_FADT.header.length > 0 && acpi_gbl_FADT.C3latency < 1000)
return 1;
#endif
return 0;
static __init int slit_valid(struct acpi_table_slit *slit)
{
int i, j;
- int d = slit->localities;
+ int d = slit->locality_count;
for (i = 0; i < d; i++) {
for (j = 0; j < d; j++) {
u8 val = slit->entry[d*i + j];
/* Callback for Proximity Domain -> LAPIC mapping */
void __init
-acpi_numa_processor_affinity_init(struct acpi_table_processor_affinity *pa)
+acpi_numa_processor_affinity_init(struct acpi_srat_cpu_affinity *pa)
{
int pxm, node;
if (srat_disabled())
return;
- if (pa->header.length != sizeof(struct acpi_table_processor_affinity)) {
+ if (pa->header.length != sizeof(struct acpi_srat_cpu_affinity)) {
bad_srat();
return;
}
- if (pa->flags.enabled == 0)
+ if ((pa->flags & ACPI_SRAT_CPU_ENABLED) == 0)
return;
- pxm = pa->proximity_domain;
+ pxm = pa->proximity_domain_lo;
node = setup_node(pxm);
if (node < 0) {
printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
/* Looks good */
if (nd->start == nd->end) {
- nd->start = start;
- nd->end = end;
+ nd->start = start;
+ nd->end = end;
changed = 1;
- } else {
- if (nd->start == end) {
- nd->start = start;
+ } else {
+ if (nd->start == end) {
+ nd->start = start;
changed = 1;
}
- if (nd->end == start) {
- nd->end = end;
+ if (nd->end == start) {
+ nd->end = end;
changed = 1;
}
if (!changed)
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
- }
+ }
ret = update_end_of_memory(nd->end);
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
void __init
-acpi_numa_memory_affinity_init(struct acpi_table_memory_affinity *ma)
+acpi_numa_memory_affinity_init(struct acpi_srat_mem_affinity *ma)
{
struct bootnode *nd, oldnode;
unsigned long start, end;
if (srat_disabled())
return;
- if (ma->header.length != sizeof(struct acpi_table_memory_affinity)) {
+ if (ma->header.length != sizeof(struct acpi_srat_mem_affinity)) {
bad_srat();
return;
}
- if (ma->flags.enabled == 0)
+ if ((ma->flags & ACPI_SRAT_MEM_ENABLED) == 0)
return;
- if (ma->flags.hot_pluggable && !save_add_info())
+
+ if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) && !save_add_info())
return;
- start = ma->base_addr_lo | ((u64)ma->base_addr_hi << 32);
- end = start + (ma->length_lo | ((u64)ma->length_hi << 32));
+ start = ma->base_address;
+ end = start + ma->length;
pxm = ma->proximity_domain;
node = setup_node(pxm);
if (node < 0) {
push_node_boundaries(node, nd->start >> PAGE_SHIFT,
nd->end >> PAGE_SHIFT);
- if (ma->flags.hot_pluggable && (reserve_hotadd(node, start, end) < 0)) {
+ if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
+ (reserve_hotadd(node, start, end) < 0)) {
/* Ignore hotadd region. Undo damage */
printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
*nd = oldnode;
/* First clean up the node list */
for (i = 0; i < MAX_NUMNODES; i++) {
- cutoff_node(i, start, end);
+ cutoff_node(i, start, end);
if ((nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
unparse_node(i);
node_set_offline(i);
if (!node_online(i))
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
- for (i = 0; i < NR_CPUS; i++) {
+ for (i = 0; i < NR_CPUS; i++) {
if (cpu_to_node[i] == NUMA_NO_NODE)
continue;
if (!node_isset(cpu_to_node[i], nodes_parsed))
if (!acpi_slit)
return a == b ? 10 : 20;
- index = acpi_slit->localities * node_to_pxm(a);
+ index = acpi_slit->locality_count * node_to_pxm(a);
return acpi_slit->entry[index + node_to_pxm(b)];
}
/*
* mmconfig.c - Low-level direct PCI config space access via MMCONFIG
- *
+ *
* This is an 64bit optimized version that always keeps the full mmconfig
* space mapped. This allows lockless config space operation.
*/
/* Static virtual mapping of the MMCONFIG aperture */
struct mmcfg_virt {
- struct acpi_table_mcfg_config *cfg;
+ struct acpi_mcfg_allocation *cfg;
char __iomem *virt;
};
static struct mmcfg_virt *pci_mmcfg_virt;
static char __iomem *get_virt(unsigned int seg, unsigned bus)
{
int cfg_num = -1;
- struct acpi_table_mcfg_config *cfg;
+ struct acpi_mcfg_allocation *cfg;
while (1) {
++cfg_num;
if (cfg_num >= pci_mmcfg_config_num)
break;
cfg = pci_mmcfg_virt[cfg_num].cfg;
- if (cfg->pci_segment_group_number != seg)
+ if (cfg->pci_segment != seg)
continue;
if ((cfg->start_bus_number <= bus) &&
(cfg->end_bus_number >= bus))
this applies to all busses. */
cfg = &pci_mmcfg_config[0];
if (pci_mmcfg_config_num == 1 &&
- cfg->pci_segment_group_number == 0 &&
+ cfg->pci_segment == 0 &&
(cfg->start_bus_number | cfg->end_bus_number) == 0)
return pci_mmcfg_virt[0].virt;
if ((pci_probe & PCI_PROBE_MMCONF) == 0)
return;
- acpi_table_parse(ACPI_MCFG, acpi_parse_mcfg);
+ acpi_table_parse(ACPI_SIG_MCFG, acpi_parse_mcfg);
if ((pci_mmcfg_config_num == 0) ||
(pci_mmcfg_config == NULL) ||
- (pci_mmcfg_config[0].base_address == 0))
+ (pci_mmcfg_config[0].address == 0))
return;
/* Only do this check when type 1 works. If it doesn't work
assume we run on a Mac and always use MCFG */
- if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].base_address,
- pci_mmcfg_config[0].base_address + MMCONFIG_APER_MIN,
+ if (type == 1 && !e820_all_mapped(pci_mmcfg_config[0].address,
+ pci_mmcfg_config[0].address + MMCONFIG_APER_MIN,
E820_RESERVED)) {
- printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %x is not E820-reserved\n",
- pci_mmcfg_config[0].base_address);
+ printk(KERN_ERR "PCI: BIOS Bug: MCFG area at %lx is not E820-reserved\n",
+ (unsigned long)pci_mmcfg_config[0].address);
printk(KERN_ERR "PCI: Not using MMCONFIG.\n");
return;
}
}
for (i = 0; i < pci_mmcfg_config_num; ++i) {
pci_mmcfg_virt[i].cfg = &pci_mmcfg_config[i];
- pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].base_address,
+ pci_mmcfg_virt[i].virt = ioremap_nocache(pci_mmcfg_config[i].address,
MMCONFIG_APER_MAX);
if (!pci_mmcfg_virt[i].virt) {
printk(KERN_ERR "PCI: Cannot map mmconfig aperture for "
"segment %d\n",
- pci_mmcfg_config[i].pci_segment_group_number);
+ pci_mmcfg_config[i].pci_segment);
return;
}
- printk(KERN_INFO "PCI: Using MMCONFIG at %x\n", pci_mmcfg_config[i].base_address);
+ printk(KERN_INFO "PCI: Using MMCONFIG at %lx\n",
+ (unsigned long)pci_mmcfg_config[i].address);
}
unreachable_devices();
help
SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-config CRYPTO_SHA1_S390
- tristate "SHA1 digest algorithm (s390)"
- depends on S390
- select CRYPTO_ALGAPI
- help
- This is the s390 hardware accelerated implementation of the
- SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
-
config CRYPTO_SHA256
tristate "SHA256 digest algorithm"
select CRYPTO_ALGAPI
This version of SHA implements a 256 bit hash with 128 bits of
security against collision attacks.
-config CRYPTO_SHA256_S390
- tristate "SHA256 digest algorithm (s390)"
- depends on S390
- select CRYPTO_ALGAPI
- help
- This is the s390 hardware accelerated implementation of the
- SHA256 secure hash standard (DFIPS 180-2).
-
- This version of SHA implements a 256 bit hash with 128 bits of
- security against collision attacks.
-
config CRYPTO_SHA512
tristate "SHA384 and SHA512 digest algorithms"
select CRYPTO_ALGAPI
help
DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-config CRYPTO_DES_S390
- tristate "DES and Triple DES cipher algorithms (s390)"
- depends on S390
- select CRYPTO_ALGAPI
- select CRYPTO_BLKCIPHER
- help
- DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
-
config CRYPTO_BLOWFISH
tristate "Blowfish cipher algorithm"
select CRYPTO_ALGAPI
See <http://csrc.nist.gov/encryption/aes/> for more information.
-config CRYPTO_AES_S390
- tristate "AES cipher algorithms (s390)"
- depends on S390
- select CRYPTO_ALGAPI
- select CRYPTO_BLKCIPHER
- help
- This is the s390 hardware accelerated implementation of the
- AES cipher algorithms (FIPS-197). AES uses the Rijndael
- algorithm.
-
- Rijndael appears to be consistently a very good performer in
- both hardware and software across a wide range of computing
- environments regardless of its use in feedback or non-feedback
- modes. Its key setup time is excellent, and its key agility is
- good. Rijndael's very low memory requirements make it very well
- suited for restricted-space environments, in which it also
- demonstrates excellent performance. Rijndael's operations are
- among the easiest to defend against power and timing attacks.
-
- On s390 the System z9-109 currently only supports the key size
- of 128 bit.
-
config CRYPTO_CAST5
tristate "CAST5 (CAST-128) cipher algorithm"
select CRYPTO_ALGAPI
#
menu "ACPI (Advanced Configuration and Power Interface) Support"
+ depends on !X86_NUMAQ
depends on !X86_VISWS
depends on !IA64_HP_SIM
depends on IA64 || X86
Create /proc/acpi/sleep
Deprecated by /sys/power/state
+config ACPI_PROCFS
+ bool "Procfs interface (deprecated)"
+ depends on ACPI
+ default y
+ ---help---
+ Procfs interface for ACPI is made optional for back-compatible.
+ As the same functions are duplicated in sysfs interface
+ and this proc interface will be removed some time later,
+ it's marked as deprecated.
+ ( /proc/acpi/debug_layer && debug_level are deprecated by
+ /sys/module/acpi/parameters/debug_layer && debug_level.
+ /proc/acpi/info is deprecated by
+ /sys/module/acpi/parameters/acpica_version )
+
config ACPI_AC
tristate "AC Adapter"
depends on X86
config ACPI_VIDEO
tristate "Video"
- depends on X86
+ depends on X86 && BACKLIGHT_CLASS_DEVICE
help
This driver implement the ACPI Extensions For Display Adapters
for integrated graphics devices on motherboard, as specified in
help
This driver adds support for ACPI controlled docking stations
+config ACPI_BAY
+ tristate "Removable Drive Bay (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ This driver adds support for ACPI controlled removable drive
+ bays such as the IBM ultrabay or the Dell Module Bay.
+
config ACPI_PROCESSOR
tristate "Processor"
default y
Note: display switching code is currently considered EXPERIMENTAL,
toying with these values may even lock your machine.
-
+
All settings are changed via /proc/acpi/asus directory entries. Owner
and group for these entries can be set with asus_uid and asus_gid
parameters.
-
+
More information and a userspace daemon for handling the extra buttons
at <http://sourceforge.net/projects/acpi4asus/>.
-
+
If you have an ACPI-compatible ASUS laptop, say Y or M here. This
driver is still under development, so if your laptop is unsupported or
something works not quite as expected, please use the mailing list
- available on the above page (acpi4asus-user@lists.sourceforge.net)
-
+ available on the above page (acpi4asus-user@lists.sourceforge.net).
+
+ NOTE: This driver is deprecated and will probably be removed soon,
+ use asus-laptop instead.
+
config ACPI_IBM
tristate "IBM ThinkPad Laptop Extras"
depends on X86
obj-y += sleep/
obj-y += bus.o glue.o
+obj-y += scan.o
obj-$(CONFIG_ACPI_AC) += ac.o
obj-$(CONFIG_ACPI_BATTERY) += battery.o
obj-$(CONFIG_ACPI_BUTTON) += button.o
obj-$(CONFIG_ACPI_EC) += ec.o
obj-$(CONFIG_ACPI_FAN) += fan.o
obj-$(CONFIG_ACPI_DOCK) += dock.o
-obj-$(CONFIG_ACPI_VIDEO) += video.o
+obj-$(CONFIG_ACPI_BAY) += bay.o
+obj-$(CONFIG_ACPI_VIDEO) += video.o
obj-$(CONFIG_ACPI_HOTKEY) += hotkey.o
obj-y += pci_root.o pci_link.o pci_irq.o pci_bind.o
obj-$(CONFIG_ACPI_POWER) += power.o
obj-$(CONFIG_ACPI_ASUS) += asus_acpi.o
obj-$(CONFIG_ACPI_IBM) += ibm_acpi.o
obj-$(CONFIG_ACPI_TOSHIBA) += toshiba_acpi.o
-obj-y += scan.o motherboard.o
obj-$(CONFIG_ACPI_HOTPLUG_MEMORY) += acpi_memhotplug.o
obj-y += cm_sbs.o
obj-$(CONFIG_ACPI_SBS) += i2c_ec.o sbs.o
* Pontus Fuchs - Helper functions, cleanup
* Johann Wiesner - Small compile fixes
* John Belmonte - ACPI code for Toshiba laptop was a good starting point.
- * Éric Burghard - LED display support for W1N
+ * �ic Burghard - LED display support for W1N
*
*/
static int asus_hotk_get_info(void)
{
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
- struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL };
union acpi_object *model = NULL;
int bsts_result;
char *string = NULL;
* HID), this bit will be moved. A global variable asus_info contains
* the DSDT header.
*/
- status = acpi_get_table(ACPI_TABLE_ID_DSDT, 1, &dsdt);
+ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
if (ACPI_FAILURE(status))
printk(KERN_WARNING " Couldn't get the DSDT table header\n");
- else
- asus_info = dsdt.pointer;
/* We have to write 0 on init this far for all ASUS models */
if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
acpi_bus_unregister_driver(&asus_hotk_driver);
remove_proc_entry(PROC_ASUS, acpi_root_dir);
- kfree(asus_info);
-
return;
}
static int acpi_battery_add(struct acpi_device *device);
static int acpi_battery_remove(struct acpi_device *device, int type);
-static int acpi_battery_resume(struct acpi_device *device, int status);
+static int acpi_battery_resume(struct acpi_device *device);
static struct acpi_driver acpi_battery_driver = {
.name = ACPI_BATTERY_DRIVER_NAME,
}
/* this is needed to learn about changes made in suspended state */
-static int acpi_battery_resume(struct acpi_device *device, int state)
+static int acpi_battery_resume(struct acpi_device *device)
{
struct acpi_battery *battery;
--- /dev/null
+/*
+ * bay.c - ACPI removable drive bay driver
+ *
+ * Copyright (C) 2006 Kristen Carlson Accardi <kristen.c.accardi@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/notifier.h>
+#include <acpi/acpi_bus.h>
+#include <acpi/acpi_drivers.h>
+#include <linux/seq_file.h>
+#include <asm/uaccess.h>
+#include <linux/platform_device.h>
+
+#define ACPI_BAY_DRIVER_NAME "ACPI Removable Drive Bay Driver"
+
+ACPI_MODULE_NAME("bay")
+MODULE_AUTHOR("Kristen Carlson Accardi");
+MODULE_DESCRIPTION(ACPI_BAY_DRIVER_NAME);
+MODULE_LICENSE("GPL");
+#define ACPI_BAY_CLASS "bay"
+#define ACPI_BAY_COMPONENT 0x10000000
+#define _COMPONENT ACPI_BAY_COMPONENT
+#define bay_dprintk(h,s) {\
+ char prefix[80] = {'\0'};\
+ struct acpi_buffer buffer = {sizeof(prefix), prefix};\
+ acpi_get_name(h, ACPI_FULL_PATHNAME, &buffer);\
+ printk(KERN_DEBUG PREFIX "%s: %s\n", prefix, s); }
+static void bay_notify(acpi_handle handle, u32 event, void *data);
+static int acpi_bay_add(struct acpi_device *device);
+static int acpi_bay_remove(struct acpi_device *device, int type);
+
+static struct acpi_driver acpi_bay_driver = {
+ .name = ACPI_BAY_DRIVER_NAME,
+ .class = ACPI_BAY_CLASS,
+ .ids = ACPI_BAY_HID,
+ .ops = {
+ .add = acpi_bay_add,
+ .remove = acpi_bay_remove,
+ },
+};
+
+struct bay {
+ acpi_handle handle;
+ char *name;
+ struct list_head list;
+ struct platform_device *pdev;
+};
+
+static LIST_HEAD(drive_bays);
+
+
+/*****************************************************************************
+ * Drive Bay functions *
+ *****************************************************************************/
+/**
+ * is_ejectable - see if a device is ejectable
+ * @handle: acpi handle of the device
+ *
+ * If an acpi object has a _EJ0 method, then it is ejectable
+ */
+static int is_ejectable(acpi_handle handle)
+{
+ acpi_status status;
+ acpi_handle tmp;
+
+ status = acpi_get_handle(handle, "_EJ0", &tmp);
+ if (ACPI_FAILURE(status))
+ return 0;
+ return 1;
+}
+
+/**
+ * bay_present - see if the bay device is present
+ * @bay: the drive bay
+ *
+ * execute the _STA method.
+ */
+static int bay_present(struct bay *bay)
+{
+ unsigned long sta;
+ acpi_status status;
+
+ if (bay) {
+ status = acpi_evaluate_integer(bay->handle, "_STA", NULL, &sta);
+ if (ACPI_SUCCESS(status) && sta)
+ return 1;
+ }
+ return 0;
+}
+
+/**
+ * eject_device - respond to an eject request
+ * @handle - the device to eject
+ *
+ * Call this devices _EJ0 method.
+ */
+static void eject_device(acpi_handle handle)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+
+ bay_dprintk(handle, "Ejecting device");
+
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0",
+ &arg_list, NULL)))
+ pr_debug("Failed to evaluate _EJ0!\n");
+}
+
+/*
+ * show_present - read method for "present" file in sysfs
+ */
+static ssize_t show_present(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct bay *bay = dev_get_drvdata(dev);
+ return snprintf(buf, PAGE_SIZE, "%d\n", bay_present(bay));
+
+}
+DEVICE_ATTR(present, S_IRUGO, show_present, NULL);
+
+/*
+ * write_eject - write method for "eject" file in sysfs
+ */
+static ssize_t write_eject(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct bay *bay = dev_get_drvdata(dev);
+
+ if (!count)
+ return -EINVAL;
+
+ eject_device(bay->handle);
+ return count;
+}
+DEVICE_ATTR(eject, S_IWUSR, NULL, write_eject);
+
+/**
+ * is_ata - see if a device is an ata device
+ * @handle: acpi handle of the device
+ *
+ * If an acpi object has one of 4 ATA ACPI methods defined,
+ * then it is an ATA device
+ */
+static int is_ata(acpi_handle handle)
+{
+ acpi_handle tmp;
+
+ if ((ACPI_SUCCESS(acpi_get_handle(handle, "_GTF", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_GTM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_STM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_SDD", &tmp))))
+ return 1;
+
+ return 0;
+}
+
+/**
+ * parent_is_ata(acpi_handle handle)
+ *
+ */
+static int parent_is_ata(acpi_handle handle)
+{
+ acpi_handle phandle;
+
+ if (acpi_get_parent(handle, &phandle))
+ return 0;
+
+ return is_ata(phandle);
+}
+
+/**
+ * is_ejectable_bay - see if a device is an ejectable drive bay
+ * @handle: acpi handle of the device
+ *
+ * If an acpi object is ejectable and has one of the ACPI ATA
+ * methods defined, then we can safely call it an ejectable
+ * drive bay
+ */
+static int is_ejectable_bay(acpi_handle handle)
+{
+ if ((is_ata(handle) || parent_is_ata(handle)) && is_ejectable(handle))
+ return 1;
+ return 0;
+}
+
+/**
+ * eject_removable_drive - try to eject this drive
+ * @dev : the device structure of the drive
+ *
+ * If a device is a removable drive that requires an _EJ0 method
+ * to be executed in order to safely remove from the system, do
+ * it. ATM - always returns success
+ */
+int eject_removable_drive(struct device *dev)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+
+ if (handle) {
+ bay_dprintk(handle, "Got device handle");
+ if (is_ejectable_bay(handle))
+ eject_device(handle);
+ } else {
+ printk("No acpi handle for device\n");
+ }
+
+ /* should I return an error code? */
+ return 0;
+}
+EXPORT_SYMBOL_GPL(eject_removable_drive);
+
+static int acpi_bay_add(struct acpi_device *device)
+{
+ bay_dprintk(device->handle, "adding bay device");
+ strcpy(acpi_device_name(device), "Dockable Bay");
+ strcpy(acpi_device_class(device), "bay");
+ return 0;
+}
+
+static int acpi_bay_add_fs(struct bay *bay)
+{
+ int ret;
+ struct device *dev = &bay->pdev->dev;
+
+ ret = device_create_file(dev, &dev_attr_present);
+ if (ret)
+ goto add_fs_err;
+ ret = device_create_file(dev, &dev_attr_eject);
+ if (ret) {
+ device_remove_file(dev, &dev_attr_present);
+ goto add_fs_err;
+ }
+ return 0;
+
+ add_fs_err:
+ bay_dprintk(bay->handle, "Error adding sysfs files\n");
+ return ret;
+}
+
+static void acpi_bay_remove_fs(struct bay *bay)
+{
+ struct device *dev = &bay->pdev->dev;
+
+ /* cleanup sysfs */
+ device_remove_file(dev, &dev_attr_present);
+ device_remove_file(dev, &dev_attr_eject);
+}
+
+static int bay_is_dock_device(acpi_handle handle)
+{
+ acpi_handle parent;
+
+ acpi_get_parent(handle, &parent);
+
+ /* if the device or it's parent is dependent on the
+ * dock, then we are a dock device
+ */
+ return (is_dock_device(handle) || is_dock_device(parent));
+}
+
+static int bay_add(acpi_handle handle, int id)
+{
+ acpi_status status;
+ struct bay *new_bay;
+ struct platform_device *pdev;
+ struct acpi_buffer nbuffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ acpi_get_name(handle, ACPI_FULL_PATHNAME, &nbuffer);
+
+ bay_dprintk(handle, "Adding notify handler");
+
+ /*
+ * Initialize bay device structure
+ */
+ new_bay = kzalloc(GFP_ATOMIC, sizeof(*new_bay));
+ INIT_LIST_HEAD(&new_bay->list);
+ new_bay->handle = handle;
+ new_bay->name = (char *)nbuffer.pointer;
+
+ /* initialize platform device stuff */
+ pdev = platform_device_register_simple(ACPI_BAY_CLASS, id, NULL, 0);
+ if (pdev == NULL) {
+ printk(KERN_ERR PREFIX "Error registering bay device\n");
+ goto bay_add_err;
+ }
+ new_bay->pdev = pdev;
+ platform_set_drvdata(pdev, new_bay);
+
+ if (acpi_bay_add_fs(new_bay)) {
+ platform_device_unregister(new_bay->pdev);
+ goto bay_add_err;
+ }
+
+ /* register for events on this device */
+ status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify, new_bay);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Error installing bay notify handler\n");
+ }
+
+ /* if we are on a dock station, we should register for dock
+ * notifications.
+ */
+ if (bay_is_dock_device(handle)) {
+ bay_dprintk(handle, "Is dependent on dock\n");
+ register_hotplug_dock_device(handle, bay_notify, new_bay);
+ }
+ list_add(&new_bay->list, &drive_bays);
+ printk(KERN_INFO PREFIX "Bay [%s] Added\n", new_bay->name);
+ return 0;
+
+bay_add_err:
+ kfree(new_bay->name);
+ kfree(new_bay);
+ return -ENODEV;
+}
+
+static int acpi_bay_remove(struct acpi_device *device, int type)
+{
+ /*** FIXME: do something here */
+ return 0;
+}
+
+/**
+ * bay_create_acpi_device - add new devices to acpi
+ * @handle - handle of the device to add
+ *
+ * This function will create a new acpi_device for the given
+ * handle if one does not exist already. This should cause
+ * acpi to scan for drivers for the given devices, and call
+ * matching driver's add routine.
+ *
+ * Returns a pointer to the acpi_device corresponding to the handle.
+ */
+static struct acpi_device * bay_create_acpi_device(acpi_handle handle)
+{
+ struct acpi_device *device = NULL;
+ struct acpi_device *parent_device;
+ acpi_handle parent;
+ int ret;
+
+ bay_dprintk(handle, "Trying to get device");
+ if (acpi_bus_get_device(handle, &device)) {
+ /*
+ * no device created for this object,
+ * so we should create one.
+ */
+ bay_dprintk(handle, "No device for handle");
+ acpi_get_parent(handle, &parent);
+ if (acpi_bus_get_device(parent, &parent_device))
+ parent_device = NULL;
+
+ ret = acpi_bus_add(&device, parent_device, handle,
+ ACPI_BUS_TYPE_DEVICE);
+ if (ret) {
+ pr_debug("error adding bus, %x\n",
+ -ret);
+ return NULL;
+ }
+ }
+ return device;
+}
+
+/**
+ * bay_notify - act upon an acpi bay notification
+ * @handle: the bay handle
+ * @event: the acpi event
+ * @data: our driver data struct
+ *
+ */
+static void bay_notify(acpi_handle handle, u32 event, void *data)
+{
+ struct acpi_device *dev;
+
+ bay_dprintk(handle, "Bay event");
+
+ switch(event) {
+ case ACPI_NOTIFY_BUS_CHECK:
+ printk("Bus Check\n");
+ case ACPI_NOTIFY_DEVICE_CHECK:
+ printk("Device Check\n");
+ dev = bay_create_acpi_device(handle);
+ if (dev)
+ acpi_bus_generate_event(dev, event, 0);
+ else
+ printk("No device for generating event\n");
+ /* wouldn't it be a good idea to just rescan SATA
+ * right here?
+ */
+ break;
+ case ACPI_NOTIFY_EJECT_REQUEST:
+ printk("Eject request\n");
+ dev = bay_create_acpi_device(handle);
+ if (dev)
+ acpi_bus_generate_event(dev, event, 0);
+ else
+ printk("No device for generating eventn");
+
+ /* wouldn't it be a good idea to just call the
+ * eject_device here if we were a SATA device?
+ */
+ break;
+ default:
+ printk("unknown event %d\n", event);
+ }
+}
+
+static acpi_status
+find_bay(acpi_handle handle, u32 lvl, void *context, void **rv)
+{
+ int *count = (int *)context;
+
+ /*
+ * there could be more than one ejectable bay.
+ * so, just return AE_OK always so that every object
+ * will be checked.
+ */
+ if (is_ejectable_bay(handle)) {
+ bay_dprintk(handle, "found ejectable bay");
+ if (!bay_add(handle, *count))
+ (*count)++;
+ }
+ return AE_OK;
+}
+
+static int __init bay_init(void)
+{
+ int bays = 0;
+
+ INIT_LIST_HEAD(&drive_bays);
+
+ /* look for dockable drive bays */
+ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+ ACPI_UINT32_MAX, find_bay, &bays, NULL);
+
+ if (bays)
+ if ((acpi_bus_register_driver(&acpi_bay_driver) < 0))
+ printk(KERN_ERR "Unable to register bay driver\n");
+
+ if (!bays)
+ return -ENODEV;
+
+ return 0;
+}
+
+static void __exit bay_exit(void)
+{
+ struct bay *bay, *tmp;
+
+ list_for_each_entry_safe(bay, tmp, &drive_bays, list) {
+ if (is_dock_device(bay->handle))
+ unregister_hotplug_dock_device(bay->handle);
+ acpi_bay_remove_fs(bay);
+ acpi_remove_notify_handler(bay->handle, ACPI_SYSTEM_NOTIFY,
+ bay_notify);
+ platform_device_unregister(bay->pdev);
+ kfree(bay->name);
+ kfree(bay);
+ }
+
+ acpi_bus_unregister_driver(&acpi_bay_driver);
+}
+
+postcore_initcall(bay_init);
+module_exit(bay_exit);
+
char oem_id[7];
char oem_table_id[9];
u32 oem_revision;
- acpi_table_type table;
+ char *table;
enum acpi_blacklist_predicates oem_revision_predicate;
char *reason;
u32 is_critical_error;
*/
static struct acpi_blacklist_item acpi_blacklist[] __initdata = {
/* Compaq Presario 1700 */
- {"PTLTD ", " DSDT ", 0x06040000, ACPI_DSDT, less_than_or_equal,
+ {"PTLTD ", " DSDT ", 0x06040000, ACPI_SIG_DSDT, less_than_or_equal,
"Multiple problems", 1},
/* Sony FX120, FX140, FX150? */
- {"SONY ", "U0 ", 0x20010313, ACPI_DSDT, less_than_or_equal,
+ {"SONY ", "U0 ", 0x20010313, ACPI_SIG_DSDT, less_than_or_equal,
"ACPI driver problem", 1},
/* Compaq Presario 800, Insyde BIOS */
- {"INT440", "SYSFexxx", 0x00001001, ACPI_DSDT, less_than_or_equal,
+ {"INT440", "SYSFexxx", 0x00001001, ACPI_SIG_DSDT, less_than_or_equal,
"Does not use _REG to protect EC OpRegions", 1},
/* IBM 600E - _ADR should return 7, but it returns 1 */
- {"IBM ", "TP600E ", 0x00000105, ACPI_DSDT, less_than_or_equal,
+ {"IBM ", "TP600E ", 0x00000105, ACPI_SIG_DSDT, less_than_or_equal,
"Incorrect _ADR", 1},
- {"ASUS\0\0", "P2B-S ", 0, ACPI_DSDT, all_versions,
+ {"ASUS\0\0", "P2B-S ", 0, ACPI_SIG_DSDT, all_versions,
"Bogus PCI routing", 1},
{""}
{
int year = dmi_get_year(DMI_BIOS_DATE);
/* Doesn't exist? Likely an old system */
- if (year == -1)
+ if (year == -1)
return 1;
/* 0? Likely a buggy new BIOS */
if (year == 0)
{
int i = 0;
int blacklisted = 0;
- struct acpi_table_header *table_header;
+ struct acpi_table_header table_header;
while (acpi_blacklist[i].oem_id[0] != '\0') {
- if (acpi_get_table_header_early
- (acpi_blacklist[i].table, &table_header)) {
+ if (acpi_get_table_header(acpi_blacklist[i].table, 0, &table_header)) {
i++;
continue;
}
- if (strncmp(acpi_blacklist[i].oem_id, table_header->oem_id, 6)) {
+ if (strncmp(acpi_blacklist[i].oem_id, table_header.oem_id, 6)) {
i++;
continue;
}
if (strncmp
- (acpi_blacklist[i].oem_table_id, table_header->oem_table_id,
+ (acpi_blacklist[i].oem_table_id, table_header.oem_table_id,
8)) {
i++;
continue;
if ((acpi_blacklist[i].oem_revision_predicate == all_versions)
|| (acpi_blacklist[i].oem_revision_predicate ==
less_than_or_equal
- && table_header->oem_revision <=
+ && table_header.oem_revision <=
acpi_blacklist[i].oem_revision)
|| (acpi_blacklist[i].oem_revision_predicate ==
greater_than_or_equal
- && table_header->oem_revision >=
+ && table_header.oem_revision >=
acpi_blacklist[i].oem_revision)
|| (acpi_blacklist[i].oem_revision_predicate == equal
- && table_header->oem_revision ==
+ && table_header.oem_revision ==
acpi_blacklist[i].oem_revision)) {
printk(KERN_ERR PREFIX
extern void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger);
#endif
-struct fadt_descriptor acpi_fadt;
-EXPORT_SYMBOL(acpi_fadt);
-
struct acpi_device *acpi_root;
struct proc_dir_entry *acpi_root_dir;
EXPORT_SYMBOL(acpi_root_dir);
if (!device->flags.power_manageable) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Device `[%s]' is not power manageable\n",
- device->kobj.name));
+ device->dev.kobj.name));
return -ENODEV;
}
/*
return 0;
}
+acpi_native_uint acpi_gbl_permanent_mmap;
+
+
void __init acpi_early_init(void)
{
acpi_status status = AE_OK;
- struct acpi_buffer buffer = { sizeof(acpi_fadt), &acpi_fadt };
-
if (acpi_disabled)
return;
if (!acpi_strict)
acpi_gbl_enable_interpreter_slack = TRUE;
+ acpi_gbl_permanent_mmap = 1;
+
+ status = acpi_reallocate_root_table();
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX
+ "Unable to reallocate ACPI tables\n");
+ goto error0;
+ }
+
status = acpi_initialize_subsystem();
if (ACPI_FAILURE(status)) {
printk(KERN_ERR PREFIX
goto error0;
}
- /*
- * Get a separate copy of the FADT for use by other drivers.
- */
- status = acpi_get_table(ACPI_TABLE_ID_FADT, 1, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Unable to get the FADT\n");
- goto error0;
- }
#ifdef CONFIG_X86
if (!acpi_ioapic) {
- extern acpi_interrupt_flags acpi_sci_flags;
+ extern u8 acpi_sci_flags;
/* compatible (0) means level (3) */
- if (acpi_sci_flags.trigger == 0)
- acpi_sci_flags.trigger = 3;
-
+ if (!(acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)) {
+ acpi_sci_flags &= ~ACPI_MADT_TRIGGER_MASK;
+ acpi_sci_flags |= ACPI_MADT_TRIGGER_LEVEL;
+ }
/* Set PIC-mode SCI trigger type */
- acpi_pic_sci_set_trigger(acpi_fadt.sci_int,
- acpi_sci_flags.trigger);
+ acpi_pic_sci_set_trigger(acpi_gbl_FADT.sci_interrupt,
+ (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2);
} else {
extern int acpi_sci_override_gsi;
/*
- * now that acpi_fadt is initialized,
+ * now that acpi_gbl_FADT is initialized,
* update it with result from INT_SRC_OVR parsing
*/
- acpi_fadt.sci_int = acpi_sci_override_gsi;
+ acpi_gbl_FADT.sci_interrupt = acpi_sci_override_gsi;
}
#endif
static struct acpi_driver acpi_button_driver = {
.name = ACPI_BUTTON_DRIVER_NAME,
.class = ACPI_BUTTON_CLASS,
- .ids = "ACPI_FPB,ACPI_FSB,PNP0C0D,PNP0C0C,PNP0C0E",
+ .ids = "button_power,button_sleep,PNP0C0D,PNP0C0C,PNP0C0E",
.ops = {
.add = acpi_button_add,
.remove = acpi_button_remove,
if (ACPI_FAILURE(status) || !device) {
result = container_device_add(&device, handle);
if (!result)
- kobject_uevent(&device->kobj,
+ kobject_uevent(&device->dev.kobj,
KOBJ_ONLINE);
else
printk("Failed to add container\n");
} else {
if (ACPI_SUCCESS(status)) {
/* device exist and this is a remove request */
- kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+ kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
}
}
break;
case ACPI_NOTIFY_EJECT_REQUEST:
if (!acpi_bus_get_device(handle, &device) && device) {
- kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+ kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
}
break;
default:
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("debug")
-#define ACPI_SYSTEM_FILE_DEBUG_LAYER "debug_layer"
-#define ACPI_SYSTEM_FILE_DEBUG_LEVEL "debug_level"
+
#ifdef MODULE_PARAM_PREFIX
#undef MODULE_PARAM_PREFIX
#endif
-#define MODULE_PARAM_PREFIX
- module_param(acpi_dbg_layer, uint, 0400);
-module_param(acpi_dbg_level, uint, 0400);
+#define MODULE_PARAM_PREFIX "acpi."
struct acpi_dlayer {
const char *name;
ACPI_DEBUG_INIT(ACPI_LV_EVENTS),
};
+/* --------------------------------------------------------------------------
+ FS Interface (/sys)
+ -------------------------------------------------------------------------- */
+static int param_get_debug_layer(char *buffer, struct kernel_param *kp) {
+ int result = 0;
+ int i;
+
+ result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
+
+ for(i = 0; i <ARRAY_SIZE(acpi_debug_layers); i++) {
+ result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
+ acpi_debug_layers[i].name,
+ acpi_debug_layers[i].value,
+ (acpi_dbg_layer & acpi_debug_layers[i].value) ? '*' : ' ');
+ }
+ result += sprintf(buffer+result, "%-25s\t0x%08X [%c]\n", "ACPI_ALL_DRIVERS",
+ ACPI_ALL_DRIVERS,
+ (acpi_dbg_layer & ACPI_ALL_DRIVERS) ==
+ ACPI_ALL_DRIVERS ? '*' : (acpi_dbg_layer &
+ ACPI_ALL_DRIVERS) == 0 ? ' ' : '-');
+ result += sprintf(buffer+result, "--\ndebug_layer = 0x%08X ( * = enabled)\n", acpi_dbg_layer);
+
+ return result;
+}
+
+static int param_get_debug_level(char *buffer, struct kernel_param *kp) {
+ int result = 0;
+ int i;
+
+ result = sprintf(buffer, "%-25s\tHex SET\n", "Description");
+
+ for (i = 0; i < ARRAY_SIZE(acpi_debug_levels); i++) {
+ result += sprintf(buffer+result, "%-25s\t0x%08lX [%c]\n",
+ acpi_debug_levels[i].name,
+ acpi_debug_levels[i].value,
+ (acpi_dbg_level & acpi_debug_levels[i].
+ value) ? '*' : ' ');
+ }
+ result += sprintf(buffer+result, "--\ndebug_level = 0x%08X (* = enabled)\n",
+ acpi_dbg_level);
+
+ return result;
+}
+
+module_param_call(debug_layer, param_set_uint, param_get_debug_layer, &acpi_dbg_layer, 0644);
+module_param_call(debug_level, param_set_uint, param_get_debug_level, &acpi_dbg_level, 0644);
+
+/* --------------------------------------------------------------------------
+ FS Interface (/proc)
+ -------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
+#define ACPI_SYSTEM_FILE_DEBUG_LAYER "debug_layer"
+#define ACPI_SYSTEM_FILE_DEBUG_LEVEL "debug_level"
+
static int
acpi_system_read_debug(char *page,
char **start, off_t off, int count, int *eof, void *data)
}
subsys_initcall(acpi_debug_init);
+#endif
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
}
- /* We could put the returned object (Node) on the object stack for later,
+ /*
+ * We could put the returned object (Node) on the object stack for later,
* but for now, we will put it in the "op" object that the parser uses,
* so we can get it again at the end of this scope
*/
/* Third arg is the bank_value */
+ /* TBD: This arg is a term_arg, not a constant, and must be evaluated */
+
arg = arg->common.next;
- info.bank_value = (u32) arg->common.value.integer;
+
+ /* Currently, only the following constants are supported */
+
+ switch (arg->common.aml_opcode) {
+ case AML_ZERO_OP:
+ info.bank_value = 0;
+ break;
+
+ case AML_ONE_OP:
+ info.bank_value = 1;
+ break;
+
+ case AML_BYTE_OP:
+ case AML_WORD_OP:
+ case AML_DWORD_OP:
+ case AML_QWORD_OP:
+ info.bank_value = (u32) arg->common.value.integer;
+ break;
+
+ default:
+ info.bank_value = 0;
+ ACPI_ERROR((AE_INFO,
+ "Non-constant BankValue for BankField is not implemented"));
+ }
/* Fourth arg is the field flags */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acdispat.h>
#include <acpi/acnamesp.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_DISPATCHER
ACPI_MODULE_NAME("dsinit")
* We are only interested in NS nodes owned by the table that
* was just loaded
*/
- if (node->owner_id != info->table_desc->owner_id) {
+ if (node->owner_id != info->owner_id) {
return (AE_OK);
}
******************************************************************************/
acpi_status
-acpi_ds_initialize_objects(struct acpi_table_desc * table_desc,
+acpi_ds_initialize_objects(acpi_native_uint table_index,
struct acpi_namespace_node * start_node)
{
acpi_status status;
struct acpi_init_walk_info info;
+ struct acpi_table_header *table;
+ acpi_owner_id owner_id;
ACPI_FUNCTION_TRACE(ds_initialize_objects);
+ status = acpi_tb_get_owner_id(table_index, &owner_id);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
"**** Starting initialization of namespace objects ****\n"));
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT, "Parsing all Control Methods:"));
info.op_region_count = 0;
info.object_count = 0;
info.device_count = 0;
- info.table_desc = table_desc;
+ info.table_index = table_index;
+ info.owner_id = owner_id;
/* Walk entire namespace from the supplied root */
ACPI_EXCEPTION((AE_INFO, status, "During WalkNamespace"));
}
+ status = acpi_get_table_by_index(table_index, &table);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
ACPI_DEBUG_PRINT_RAW((ACPI_DB_INIT,
"\nTable [%4.4s](id %4.4X) - %hd Objects with %hd Devices %hd Methods %hd Regions\n",
- table_desc->pointer->signature,
- table_desc->owner_id, info.object_count,
+ table->signature, owner_id, info.object_count,
info.device_count, info.method_count,
info.op_region_count));
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_FUNCTION_TRACE_PTR(ds_call_control_method, this_walk_state);
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "Execute method %p, currentstate=%p\n",
+ "Calling method %p, currentstate=%p\n",
this_walk_state->prev_op, this_walk_state));
/*
return_ACPI_STATUS(status);
}
- /*
- * 1) Parse the method. All "normal" methods are parsed for each execution.
- * Internal methods (_OSI, etc.) do not require parsing.
- */
- if (!(obj_desc->method.method_flags & AML_METHOD_INTERNAL_ONLY)) {
-
- /* Create a new walk state for the parse */
-
- next_walk_state =
- acpi_ds_create_walk_state(obj_desc->method.owner_id, op,
- obj_desc, NULL);
- if (!next_walk_state) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
-
- /* Create and init a parse tree root */
-
- op = acpi_ps_create_scope_op();
- if (!op) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
-
- status = acpi_ds_init_aml_walk(next_walk_state, op, method_node,
- obj_desc->method.aml_start,
- obj_desc->method.aml_length,
- NULL, 1);
- if (ACPI_FAILURE(status)) {
- acpi_ps_delete_parse_tree(op);
- goto cleanup;
- }
-
- /* Begin AML parse (deletes next_walk_state) */
-
- status = acpi_ps_parse_aml(next_walk_state);
- acpi_ps_delete_parse_tree(op);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
- }
-
- /* 2) Begin method execution. Create a new walk state */
+ /* Begin method parse/execution. Create a new walk state */
next_walk_state = acpi_ds_create_walk_state(obj_desc->method.owner_id,
NULL, obj_desc, thread);
status = acpi_ds_init_aml_walk(next_walk_state, NULL, method_node,
obj_desc->method.aml_start,
- obj_desc->method.aml_length, info, 3);
+ obj_desc->method.aml_length, info,
+ ACPI_IMODE_EXECUTE);
ACPI_FREE(info);
if (ACPI_FAILURE(status)) {
this_walk_state->num_operands = 0;
ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
- "Starting nested execution, newstate=%p\n",
- next_walk_state));
+ "**** Begin nested execution of [%4.4s] **** WalkState=%p\n",
+ method_node->name.ascii, next_walk_state));
/* Invoke an internal method if necessary */
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
obj_desc->buffer.flags |= AOPOBJ_DATA_VALID;
- op->common.node = (struct acpi_namespace_node *)obj_desc;
+ op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
return_ACPI_STATUS(AE_OK);
}
*
* PARAMETERS: walk_state - Current walk state
* Op - Parser object to be translated
- * package_length - Number of elements in the package
+ * element_count - Number of elements in the package - this is
+ * the num_elements argument to Package()
* obj_desc_ptr - Where the ACPI internal object is returned
*
* RETURN: Status
* DESCRIPTION: Translate a parser Op package object to the equivalent
* namespace object
*
+ * NOTE: The number of elements in the package will be always be the num_elements
+ * count, regardless of the number of elements in the package list. If
+ * num_elements is smaller, only that many package list elements are used.
+ * if num_elements is larger, the Package object is padded out with
+ * objects of type Uninitialized (as per ACPI spec.)
+ *
+ * Even though the ASL compilers do not allow num_elements to be smaller
+ * than the Package list length (for the fixed length package opcode), some
+ * BIOS code modifies the AML on the fly to adjust the num_elements, and
+ * this code compensates for that. This also provides compatibility with
+ * other AML interpreters.
+ *
******************************************************************************/
acpi_status
acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
union acpi_parse_object *op,
- u32 package_length,
+ u32 element_count,
union acpi_operand_object **obj_desc_ptr)
{
union acpi_parse_object *arg;
union acpi_parse_object *parent;
union acpi_operand_object *obj_desc = NULL;
- u32 package_list_length;
acpi_status status = AE_OK;
acpi_native_uint i;
obj_desc->package.node = parent->common.node;
}
- obj_desc->package.count = package_length;
-
- /* Count the number of items in the package list */
-
- arg = op->common.value.arg;
- arg = arg->common.next;
- for (package_list_length = 0; arg; package_list_length++) {
- arg = arg->common.next;
- }
-
- /*
- * The package length (number of elements) will be the greater
- * of the specified length and the length of the initializer list
- */
- if (package_list_length > package_length) {
- obj_desc->package.count = package_list_length;
- }
-
/*
- * Allocate the pointer array (array of pointers to the
- * individual objects). Add an extra pointer slot so
- * that the list is always null terminated.
+ * Allocate the element array (array of pointers to the individual
+ * objects) based on the num_elements parameter. Add an extra pointer slot
+ * so that the list is always null terminated.
*/
obj_desc->package.elements = ACPI_ALLOCATE_ZEROED(((acpi_size)
- obj_desc->package.
- count +
+ element_count +
1) * sizeof(void *));
if (!obj_desc->package.elements) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
+ obj_desc->package.count = element_count;
+
/*
- * Initialize all elements of the package
+ * Initialize the elements of the package, up to the num_elements count.
+ * Package is automatically padded with uninitialized (NULL) elements
+ * if num_elements is greater than the package list length. Likewise,
+ * Package is truncated if num_elements is less than the list length.
*/
arg = op->common.value.arg;
arg = arg->common.next;
- for (i = 0; arg; i++) {
+ for (i = 0; arg && (i < element_count); i++) {
if (arg->common.aml_opcode == AML_INT_RETURN_VALUE_OP) {
- /* Object (package or buffer) is already built */
+ /* This package element is already built, just get it */
obj_desc->package.elements[i] =
ACPI_CAST_PTR(union acpi_operand_object,
arg = arg->common.next;
}
+ if (!arg) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Package List length larger than NumElements count (%X), truncated\n",
+ element_count));
+ }
+
obj_desc->package.flags |= AOPOBJ_DATA_VALID;
- op->common.node = (struct acpi_namespace_node *)obj_desc;
+ op->common.node = ACPI_CAST_PTR(struct acpi_namespace_node, obj_desc);
return_ACPI_STATUS(status);
}
/*
* Defer evaluation of Buffer term_arg operand
*/
- obj_desc->buffer.node = (struct acpi_namespace_node *)
- walk_state->operands[0];
+ obj_desc->buffer.node =
+ ACPI_CAST_PTR(struct acpi_namespace_node,
+ walk_state->operands[0]);
obj_desc->buffer.aml_start = op->named.data;
obj_desc->buffer.aml_length = op->named.length;
break;
/*
* Defer evaluation of Package term_arg operand
*/
- obj_desc->package.node = (struct acpi_namespace_node *)
- walk_state->operands[0];
+ obj_desc->package.node =
+ ACPI_CAST_PTR(struct acpi_namespace_node,
+ walk_state->operands[0]);
obj_desc->package.aml_start = op->named.data;
obj_desc->package.aml_length = op->named.length;
break;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
- aml_length, NULL, 1);
+ aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
if (ACPI_FAILURE(status)) {
acpi_ds_delete_walk_state(walk_state);
goto cleanup;
/* Execute the opcode and arguments */
status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
- aml_length, NULL, 3);
+ aml_length, NULL, ACPI_IMODE_EXECUTE);
if (ACPI_FAILURE(status)) {
acpi_ds_delete_walk_state(walk_state);
goto cleanup;
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
if (!op) {
status = acpi_ds_load2_begin_op(walk_state, out_op);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_exit;
}
op = *out_op;
status = acpi_ds_scope_stack_pop(walk_state);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_exit;
}
}
}
status = acpi_ds_result_stack_push(walk_state);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto error_exit;
}
status = acpi_ds_exec_begin_control_op(walk_state, op);
/* Nothing to do here during method execution */
return_ACPI_STATUS(status);
+
+ error_exit:
+ status = acpi_ds_method_error(status, walk_state);
+ return_ACPI_STATUS(status);
}
/*****************************************************************************
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
+ case ACPI_TYPE_ANY:
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
acpi_status status;
acpi_object_type object_type;
char *buffer_ptr;
+ u32 flags;
ACPI_FUNCTION_TRACE(ds_load2_begin_op);
* one of the opcodes that actually opens a scope
*/
switch (node->type) {
+ case ACPI_TYPE_ANY:
case ACPI_TYPE_LOCAL_SCOPE: /* Scope */
case ACPI_TYPE_DEVICE:
case ACPI_TYPE_POWER:
break;
}
- /* Add new entry into namespace */
+ flags = ACPI_NS_NO_UPSEARCH;
+ if (walk_state->pass_number == ACPI_IMODE_EXECUTE) {
+
+ /* Execution mode, node cannot already exist, node is temporary */
+
+ flags |= (ACPI_NS_ERROR_IF_FOUND | ACPI_NS_TEMPORARY);
+ }
+
+ /* Add new entry or lookup existing entry */
status =
acpi_ns_lookup(walk_state->scope_info, buffer_ptr,
- object_type, ACPI_IMODE_LOAD_PASS2,
- ACPI_NS_NO_UPSEARCH, walk_state, &(node));
+ object_type, ACPI_IMODE_LOAD_PASS2, flags,
+ walk_state, &node);
break;
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
find_dock_devices(acpi_handle handle, u32 lvl, void *context, void **rv)
{
acpi_status status;
- acpi_handle tmp;
+ acpi_handle tmp, parent;
struct dock_station *ds = context;
struct dock_dependent_device *dd;
status = acpi_bus_get_ejd(handle, &tmp);
- if (ACPI_FAILURE(status))
- return AE_OK;
+ if (ACPI_FAILURE(status)) {
+ /* try the parent device as well */
+ status = acpi_get_parent(handle, &parent);
+ if (ACPI_FAILURE(status))
+ goto fdd_out;
+ /* see if parent is dependent on dock */
+ status = acpi_bus_get_ejd(parent, &tmp);
+ if (ACPI_FAILURE(status))
+ goto fdd_out;
+ }
if (tmp == ds->handle) {
dd = alloc_dock_dependent_device(handle);
if (dd)
add_dock_dependent_device(ds, dd);
}
-
+fdd_out:
return AE_OK;
}
acpi_status status;
struct acpi_table_ecdt *ecdt_ptr;
- status = acpi_get_firmware_table("ECDT", 1, ACPI_LOGICAL_ADDRESSING,
- (struct acpi_table_header **)
- &ecdt_ptr);
+ status = acpi_get_table(ACPI_SIG_ECDT, 1,
+ (struct acpi_table_header **)&ecdt_ptr);
if (ACPI_FAILURE(status))
return -ENODEV;
if (acpi_ec_mode == EC_INTR) {
init_waitqueue_head(&ec_ecdt->wait);
}
- ec_ecdt->command_addr = ecdt_ptr->ec_control.address;
- ec_ecdt->data_addr = ecdt_ptr->ec_data.address;
- ec_ecdt->gpe = ecdt_ptr->gpe_bit;
+ ec_ecdt->command_addr = ecdt_ptr->control.address;
+ ec_ecdt->data_addr = ecdt_ptr->data.address;
+ ec_ecdt->gpe = ecdt_ptr->gpe;
/* use the GL just to be safe */
ec_ecdt->global_lock = TRUE;
ec_ecdt->uid = ecdt_ptr->uid;
- status = acpi_get_handle(NULL, ecdt_ptr->ec_id, &ec_ecdt->handle);
+ status = acpi_get_handle(NULL, ecdt_ptr->id, &ec_ecdt->handle);
if (ACPI_FAILURE(status)) {
goto error;
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_FUNCTION_TRACE(ev_initialize_events);
- /* Make sure we have ACPI tables */
-
- if (!acpi_gbl_DSDT) {
- ACPI_WARNING((AE_INFO, "No ACPI tables present!"));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
/*
* Initialize the Fixed and General Purpose Events. This is done prior to
* enabling SCIs to prevent interrupts from occurring before the handlers are
if (acpi_gbl_fixed_event_info[i].enable_register_id != 0xFF) {
status =
acpi_set_register(acpi_gbl_fixed_event_info[i].
- enable_register_id, 0,
- ACPI_MTX_LOCK);
+ enable_register_id, 0);
if (ACPI_FAILURE(status)) {
return (status);
}
/* Clear the status bit */
(void)acpi_set_register(acpi_gbl_fixed_event_info[event].
- status_register_id, 1, ACPI_MTX_DO_NOT_LOCK);
+ status_register_id, 1);
/*
* Make sure we've got a handler. If not, report an error.
*/
if (NULL == acpi_gbl_fixed_event_handlers[event].handler) {
(void)acpi_set_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ enable_register_id, 0);
ACPI_ERROR((AE_INFO,
"No installed handler for fixed event [%08X]",
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
if (!gpe_register_info) {
return_ACPI_STATUS(AE_NOT_EXIST);
}
- register_bit = gpe_event_info->register_bit;
+ register_bit = (u8)
+ (1 <<
+ (gpe_event_info->gpe_number - gpe_register_info->base_gpe_number));
/* 1) Disable case. Simply clear all enable bits */
/* Examine one GPE bit */
- if (enabled_status_byte &
- acpi_gbl_decode_to8bit[j]) {
+ if (enabled_status_byte & (1 << j)) {
/*
* Found an active GPE. Dispatch the event to a handler
* or method.
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "While evaluating GPE method [%4.4s]",
+ "while evaluating GPE method [%4.4s]",
acpi_ut_get_node_name
(local_gpe_event_info.dispatch.
method_node)));
ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
+ acpi_gpe_count++;
+
/*
* If edge-triggered, clear the GPE status bit now. Note that
* level-triggered events are cleared after the GPE is serviced.
}
}
- /* Save current system state */
-
- if (acpi_gbl_system_awake_and_running) {
- ACPI_SET_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
- } else {
- ACPI_CLEAR_BIT(gpe_event_info->flags, ACPI_GPE_SYSTEM_RUNNING);
+ if (!acpi_gbl_system_awake_and_running) {
+ /*
+ * We just woke up because of a wake GPE. Disable any further GPEs
+ * until we are fully up and running (Only wake GPEs should be enabled
+ * at this time, but we just brute-force disable them all.)
+ * 1) We must disable this particular wake GPE so it won't fire again
+ * 2) We want to disable all wake GPEs, since we are now awake
+ */
+ (void)acpi_hw_disable_all_gpes();
}
/*
- * Dispatch the GPE to either an installed handler, or the control
- * method associated with this GPE (_Lxx or _Exx).
- * If a handler exists, we invoke it and do not attempt to run the method.
- * If there is neither a handler nor a method, we disable the level to
- * prevent further events from coming in here.
+ * Dispatch the GPE to either an installed handler, or the control method
+ * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
+ * it and do not attempt to run the method. If there is neither a handler
+ * nor a method, we disable this GPE to prevent further such pointless
+ * events from firing.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
case ACPI_GPE_DISPATCH_METHOD:
/*
- * Disable GPE, so it doesn't keep firing before the method has a
- * chance to run.
+ * Disable the GPE, so it doesn't keep firing before the method has a
+ * chance to run (it runs asynchronously with interrupts enabled).
*/
status = acpi_ev_disable_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
gpe_number));
/*
- * Disable the GPE. The GPE will remain disabled until the ACPI
+ * Disable the GPE. The GPE will remain disabled until the ACPI
* Core Subsystem is restarted, or a handler is installed.
*/
status = acpi_ev_disable_gpe(gpe_event_info);
return_UINT32(ACPI_INTERRUPT_HANDLED);
}
-
-#ifdef ACPI_GPE_NOTIFY_CHECK
-/*******************************************************************************
- * TBD: NOT USED, PROTOTYPE ONLY AND WILL PROBABLY BE REMOVED
- *
- * FUNCTION: acpi_ev_check_for_wake_only_gpe
- *
- * PARAMETERS: gpe_event_info - info for this GPE
- *
- * RETURN: Status
- *
- * DESCRIPTION: Determine if a a GPE is "wake-only".
- *
- * Called from Notify() code in interpreter when a "DeviceWake"
- * Notify comes in.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ev_check_for_wake_only_gpe(struct acpi_gpe_event_info *gpe_event_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(ev_check_for_wake_only_gpe);
-
- if ((gpe_event_info) && /* Only >0 for _Lxx/_Exx */
- ((gpe_event_info->flags & ACPI_GPE_SYSTEM_MASK) == ACPI_GPE_SYSTEM_RUNNING)) { /* System state at GPE time */
- /* This must be a wake-only GPE, disable it */
-
- status = acpi_ev_disable_gpe(gpe_event_info);
-
- /* Set GPE to wake-only. Do not change wake disabled/enabled status */
-
- acpi_ev_set_gpe_type(gpe_event_info, ACPI_GPE_TYPE_WAKE);
-
- ACPI_INFO((AE_INFO,
- "GPE %p was updated from wake/run to wake-only",
- gpe_event_info));
-
- /* This was a wake-only GPE */
-
- return_ACPI_STATUS(AE_WAKE_ONLY_GPE);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-#endif
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Install new interrupt handler if not SCI_INT */
- if (interrupt_number != acpi_gbl_FADT->sci_int) {
+ if (interrupt_number != acpi_gbl_FADT.sci_interrupt) {
status = acpi_os_install_interrupt_handler(interrupt_number,
acpi_ev_gpe_xrupt_handler,
gpe_xrupt);
/* We never want to remove the SCI interrupt handler */
- if (gpe_xrupt->interrupt_number == acpi_gbl_FADT->sci_int) {
+ if (gpe_xrupt->interrupt_number == acpi_gbl_FADT.sci_interrupt) {
gpe_xrupt->gpe_block_list_head = NULL;
return_ACPI_STATUS(AE_OK);
}
(u8) (gpe_block->block_base_number +
(i * ACPI_GPE_REGISTER_WIDTH));
- ACPI_STORE_ADDRESS(this_register->status_address.address,
- (gpe_block->block_address.address + i));
+ this_register->status_address.address =
+ gpe_block->block_address.address + i;
- ACPI_STORE_ADDRESS(this_register->enable_address.address,
- (gpe_block->block_address.address
- + i + gpe_block->register_count));
+ this_register->enable_address.address =
+ gpe_block->block_address.address + i +
+ gpe_block->register_count;
- this_register->status_address.address_space_id =
- gpe_block->block_address.address_space_id;
- this_register->enable_address.address_space_id =
- gpe_block->block_address.address_space_id;
- this_register->status_address.register_bit_width =
+ this_register->status_address.space_id =
+ gpe_block->block_address.space_id;
+ this_register->enable_address.space_id =
+ gpe_block->block_address.space_id;
+ this_register->status_address.bit_width =
ACPI_GPE_REGISTER_WIDTH;
- this_register->enable_address.register_bit_width =
+ this_register->enable_address.bit_width =
ACPI_GPE_REGISTER_WIDTH;
- this_register->status_address.register_bit_offset =
+ this_register->status_address.bit_offset =
ACPI_GPE_REGISTER_WIDTH;
- this_register->enable_address.register_bit_offset =
+ this_register->enable_address.bit_offset =
ACPI_GPE_REGISTER_WIDTH;
/* Init the event_info for each GPE within this register */
for (j = 0; j < ACPI_GPE_REGISTER_WIDTH; j++) {
- this_event->register_bit = acpi_gbl_decode_to8bit[j];
+ this_event->gpe_number =
+ (u8) (this_register->base_gpe_number + j);
this_event->register_info = this_register;
this_event++;
}
* If EITHER the register length OR the block address are zero, then that
* particular block is not supported.
*/
- if (acpi_gbl_FADT->gpe0_blk_len && acpi_gbl_FADT->xgpe0_blk.address) {
+ if (acpi_gbl_FADT.gpe0_block_length &&
+ acpi_gbl_FADT.xgpe0_block.address) {
/* GPE block 0 exists (has both length and address > 0) */
- register_count0 = (u16) (acpi_gbl_FADT->gpe0_blk_len / 2);
+ register_count0 = (u16) (acpi_gbl_FADT.gpe0_block_length / 2);
gpe_number_max =
(register_count0 * ACPI_GPE_REGISTER_WIDTH) - 1;
/* Install GPE Block 0 */
status = acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
- &acpi_gbl_FADT->xgpe0_blk,
+ &acpi_gbl_FADT.xgpe0_block,
register_count0, 0,
- acpi_gbl_FADT->sci_int,
+ acpi_gbl_FADT.sci_interrupt,
&acpi_gbl_gpe_fadt_blocks[0]);
if (ACPI_FAILURE(status)) {
}
}
- if (acpi_gbl_FADT->gpe1_blk_len && acpi_gbl_FADT->xgpe1_blk.address) {
+ if (acpi_gbl_FADT.gpe1_block_length &&
+ acpi_gbl_FADT.xgpe1_block.address) {
/* GPE block 1 exists (has both length and address > 0) */
- register_count1 = (u16) (acpi_gbl_FADT->gpe1_blk_len / 2);
+ register_count1 = (u16) (acpi_gbl_FADT.gpe1_block_length / 2);
/* Check for GPE0/GPE1 overlap (if both banks exist) */
if ((register_count0) &&
- (gpe_number_max >= acpi_gbl_FADT->gpe1_base)) {
+ (gpe_number_max >= acpi_gbl_FADT.gpe1_base)) {
ACPI_ERROR((AE_INFO,
"GPE0 block (GPE 0 to %d) overlaps the GPE1 block (GPE %d to %d) - Ignoring GPE1",
- gpe_number_max, acpi_gbl_FADT->gpe1_base,
- acpi_gbl_FADT->gpe1_base +
+ gpe_number_max, acpi_gbl_FADT.gpe1_base,
+ acpi_gbl_FADT.gpe1_base +
((register_count1 *
ACPI_GPE_REGISTER_WIDTH) - 1)));
status =
acpi_ev_create_gpe_block(acpi_gbl_fadt_gpe_device,
- &acpi_gbl_FADT->xgpe1_blk,
+ &acpi_gbl_FADT.xgpe1_block,
register_count1,
- acpi_gbl_FADT->gpe1_base,
- acpi_gbl_FADT->sci_int,
+ acpi_gbl_FADT.gpe1_base,
+ acpi_gbl_FADT.
+ sci_interrupt,
&acpi_gbl_gpe_fadt_blocks
[1]);
* GPE0 and GPE1 do not have to be contiguous in the GPE number
* space. However, GPE0 always starts at GPE number zero.
*/
- gpe_number_max = acpi_gbl_FADT->gpe1_base +
+ gpe_number_max = acpi_gbl_FADT.gpe1_base +
((register_count1 * ACPI_GPE_REGISTER_WIDTH) - 1);
}
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
};
#endif
+/* Pointer to FACS needed for the Global Lock */
+
+static struct acpi_table_facs *facs = NULL;
+
/* Local prototypes */
static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context);
-static void ACPI_SYSTEM_XFACE acpi_ev_global_lock_thread(void *context);
-
static u32 acpi_ev_global_lock_handler(void *context);
+static acpi_status acpi_ev_remove_global_lock_handler(void);
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_is_notify_object
acpi_ut_delete_generic_state(notify_info);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ev_global_lock_thread
- *
- * PARAMETERS: Context - From thread interface, not used
- *
- * RETURN: None
- *
- * DESCRIPTION: Invoked by SCI interrupt handler upon acquisition of the
- * Global Lock. Simply signal all threads that are waiting
- * for the lock.
- *
- ******************************************************************************/
-
-static void ACPI_SYSTEM_XFACE acpi_ev_global_lock_thread(void *context)
-{
- acpi_status status;
-
- /* Signal threads that are waiting for the lock */
-
- if (acpi_gbl_global_lock_thread_count) {
-
- /* Send sufficient units to the semaphore */
-
- status =
- acpi_os_signal_semaphore(acpi_gbl_global_lock_semaphore,
- acpi_gbl_global_lock_thread_count);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not signal Global Lock semaphore"));
- }
- }
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ev_global_lock_handler
*
* PARAMETERS: Context - From thread interface, not used
*
- * RETURN: ACPI_INTERRUPT_HANDLED or ACPI_INTERRUPT_NOT_HANDLED
+ * RETURN: ACPI_INTERRUPT_HANDLED
*
* DESCRIPTION: Invoked directly from the SCI handler when a global lock
- * release interrupt occurs. Grab the global lock and queue
- * the global lock thread for execution
+ * release interrupt occurs. Attempt to acquire the global lock,
+ * if successful, signal the thread waiting for the lock.
+ *
+ * NOTE: Assumes that the semaphore can be signaled from interrupt level. If
+ * this is not possible for some reason, a separate thread will have to be
+ * scheduled to do this.
*
******************************************************************************/
u8 acquired = FALSE;
/*
- * Attempt to get the lock
+ * Attempt to get the lock.
+ *
* If we don't get it now, it will be marked pending and we will
* take another interrupt when it becomes free.
*/
- ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, acquired);
+ ACPI_ACQUIRE_GLOBAL_LOCK(facs, acquired);
if (acquired) {
/* Got the lock, now wake all threads waiting for it */
+
acpi_gbl_global_lock_acquired = TRUE;
- acpi_ev_global_lock_thread(context);
+ /* Send a unit to the semaphore */
+
+ if (ACPI_FAILURE(acpi_os_signal_semaphore(
+ acpi_gbl_global_lock_semaphore, 1))) {
+ ACPI_ERROR((AE_INFO,
+ "Could not signal Global Lock semaphore"));
+ }
}
return (ACPI_INTERRUPT_HANDLED);
ACPI_FUNCTION_TRACE(ev_init_global_lock_handler);
+ status =
+ acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
+ (struct acpi_table_header **)&facs);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
acpi_gbl_global_lock_present = TRUE;
status = acpi_install_fixed_event_handler(ACPI_EVENT_GLOBAL,
acpi_ev_global_lock_handler,
return_ACPI_STATUS(status);
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_remove_global_lock_handler
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Remove the handler for the Global Lock
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ev_remove_global_lock_handler(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(ev_remove_global_lock_handler);
+
+ acpi_gbl_global_lock_present = FALSE;
+ status = acpi_remove_fixed_event_handler(ACPI_EVENT_GLOBAL,
+ acpi_ev_global_lock_handler);
+
+ return_ACPI_STATUS(status);
+}
+
/******************************************************************************
*
* FUNCTION: acpi_ev_acquire_global_lock
*
* DESCRIPTION: Attempt to gain ownership of the Global Lock.
*
+ * MUTEX: Interpreter must be locked
+ *
+ * Note: The original implementation allowed multiple threads to "acquire" the
+ * Global Lock, and the OS would hold the lock until the last thread had
+ * released it. However, this could potentially starve the BIOS out of the
+ * lock, especially in the case where there is a tight handshake between the
+ * Embedded Controller driver and the BIOS. Therefore, this implementation
+ * allows only one thread to acquire the HW Global Lock at a time, and makes
+ * the global lock appear as a standard mutex on the OS side.
+ *
*****************************************************************************/
acpi_status acpi_ev_acquire_global_lock(u16 timeout)
ACPI_FUNCTION_TRACE(ev_acquire_global_lock);
-#ifndef ACPI_APPLICATION
- /* Make sure that we actually have a global lock */
-
- if (!acpi_gbl_global_lock_present) {
- return_ACPI_STATUS(AE_NO_GLOBAL_LOCK);
+ /*
+ * Only one thread can acquire the GL at a time, the global_lock_mutex
+ * enforces this. This interface releases the interpreter if we must wait.
+ */
+ status = acpi_ex_system_wait_mutex(acpi_gbl_global_lock_mutex, timeout);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
}
-#endif
-
- /* One more thread wants the global lock */
-
- acpi_gbl_global_lock_thread_count++;
/*
- * If we (OS side vs. BIOS side) have the hardware lock already,
- * we are done
+ * Make sure that a global lock actually exists. If not, just treat
+ * the lock as a standard mutex.
*/
- if (acpi_gbl_global_lock_acquired) {
+ if (!acpi_gbl_global_lock_present) {
+ acpi_gbl_global_lock_acquired = TRUE;
return_ACPI_STATUS(AE_OK);
}
- /* We must acquire the actual hardware lock */
+ /* Attempt to acquire the actual hardware lock */
- ACPI_ACQUIRE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, acquired);
+ ACPI_ACQUIRE_GLOBAL_LOCK(facs, acquired);
if (acquired) {
/* We got the lock */
ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "Acquired the HW Global Lock\n"));
+ "Acquired hardware Global Lock\n"));
acpi_gbl_global_lock_acquired = TRUE;
return_ACPI_STATUS(AE_OK);
}
/*
- * Did not get the lock. The pending bit was set above, and we must now
+ * Did not get the lock. The pending bit was set above, and we must now
* wait until we get the global lock released interrupt.
*/
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Waiting for the HW Global Lock\n"));
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Waiting for hardware Global Lock\n"));
/*
- * Acquire the global lock semaphore first.
- * Since this wait will block, we must release the interpreter
+ * Wait for handshake with the global lock interrupt handler.
+ * This interface releases the interpreter if we must wait.
*/
- status =
- acpi_ex_system_wait_semaphore(acpi_gbl_global_lock_semaphore,
- timeout);
+ status = acpi_ex_system_wait_semaphore(acpi_gbl_global_lock_semaphore,
+ ACPI_WAIT_FOREVER);
+
return_ACPI_STATUS(status);
}
ACPI_FUNCTION_TRACE(ev_release_global_lock);
- if (!acpi_gbl_global_lock_thread_count) {
+ /* Lock must be already acquired */
+
+ if (!acpi_gbl_global_lock_acquired) {
ACPI_WARNING((AE_INFO,
- "Cannot release HW Global Lock, it has not been acquired"));
+ "Cannot release the ACPI Global Lock, it has not been acquired"));
return_ACPI_STATUS(AE_NOT_ACQUIRED);
}
- /* One fewer thread has the global lock */
+ if (acpi_gbl_global_lock_present) {
- acpi_gbl_global_lock_thread_count--;
- if (acpi_gbl_global_lock_thread_count) {
+ /* Allow any thread to release the lock */
- /* There are still some threads holding the lock, cannot release */
+ ACPI_RELEASE_GLOBAL_LOCK(facs, pending);
- return_ACPI_STATUS(AE_OK);
+ /*
+ * If the pending bit was set, we must write GBL_RLS to the control
+ * register
+ */
+ if (pending) {
+ status =
+ acpi_set_register(ACPI_BITREG_GLOBAL_LOCK_RELEASE,
+ 1);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Released hardware Global Lock\n"));
}
- /*
- * No more threads holding lock, we can do the actual hardware
- * release
- */
- ACPI_RELEASE_GLOBAL_LOCK(acpi_gbl_common_fACS.global_lock, pending);
acpi_gbl_global_lock_acquired = FALSE;
- /*
- * If the pending bit was set, we must write GBL_RLS to the control
- * register
- */
- if (pending) {
- status = acpi_set_register(ACPI_BITREG_GLOBAL_LOCK_RELEASE,
- 1, ACPI_MTX_LOCK);
- }
+ /* Release the local GL mutex */
+ acpi_os_release_mutex(acpi_gbl_global_lock_mutex);
return_ACPI_STATUS(status);
}
if (ACPI_FAILURE(status)) {
ACPI_ERROR((AE_INFO, "Could not remove SCI handler"));
}
+
+ status = acpi_ev_remove_global_lock_handler();
+ if (ACPI_FAILURE(status)) {
+ ACPI_ERROR((AE_INFO,
+ "Could not remove Global Lock handler"));
+ }
}
/* Deallocate all handler objects installed within GPE info structs */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u32 bit_width, acpi_integer * value)
{
acpi_status status;
- acpi_status status2;
acpi_adr_space_handler handler;
acpi_adr_space_setup region_setup;
union acpi_operand_object *handler_desc;
* setup will potentially execute control methods
* (e.g., _REG method for this region)
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = region_setup(region_obj, ACPI_REGION_ACTIVATE,
handler_desc->address_space.context,
/* Re-enter the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
/* Check for failure of the Region Setup */
* exit the interpreter because the handler *might* block -- we don't
* know what it will do, so we can't hold the lock on the intepreter.
*/
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
}
/* Call the handler */
* We just returned from a non-default handler, we must re-enter the
* interpreter
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evrgnini")
+/* Local prototypes */
+static u8 acpi_ev_match_pci_root_bridge(char *id);
+
+static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_system_memory_region_setup
* DESCRIPTION: Setup a system_memory operation region
*
******************************************************************************/
+
acpi_status
acpi_ev_system_memory_region_setup(acpi_handle handle,
u32 function,
union acpi_operand_object *handler_obj;
struct acpi_namespace_node *parent_node;
struct acpi_namespace_node *pci_root_node;
+ struct acpi_namespace_node *pci_device_node;
union acpi_operand_object *region_obj =
(union acpi_operand_object *)handle;
- struct acpi_device_id object_hID;
ACPI_FUNCTION_TRACE(ev_pci_config_region_setup);
pci_root_node = parent_node;
while (pci_root_node != acpi_gbl_root_node) {
- status =
- acpi_ut_execute_HID(pci_root_node, &object_hID);
- if (ACPI_SUCCESS(status)) {
- /*
- * Got a valid _HID string, check if this is a PCI root.
- * New for ACPI 3.0: check for a PCI Express root also.
- */
- if (!
- (ACPI_STRNCMP
- (object_hID.value, PCI_ROOT_HID_STRING,
- sizeof(PCI_ROOT_HID_STRING)))
- ||
- !(ACPI_STRNCMP
- (object_hID.value,
- PCI_EXPRESS_ROOT_HID_STRING,
- sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) {
-
- /* Install a handler for this PCI root bridge */
- status =
- acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
- if (ACPI_FAILURE(status)) {
- if (status == AE_SAME_HANDLER) {
- /*
- * It is OK if the handler is already installed on the root
- * bridge. Still need to return a context object for the
- * new PCI_Config operation region, however.
- */
- status = AE_OK;
- } else {
- ACPI_EXCEPTION((AE_INFO,
- status,
- "Could not install PciConfig handler for Root Bridge %4.4s",
- acpi_ut_get_node_name
- (pci_root_node)));
- }
+ /* Get the _HID/_CID in order to detect a root_bridge */
+
+ if (acpi_ev_is_pci_root_bridge(pci_root_node)) {
+
+ /* Install a handler for this PCI root bridge */
+
+ status = acpi_install_address_space_handler((acpi_handle) pci_root_node, ACPI_ADR_SPACE_PCI_CONFIG, ACPI_DEFAULT_HANDLER, NULL, NULL);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_SAME_HANDLER) {
+ /*
+ * It is OK if the handler is already installed on the root
+ * bridge. Still need to return a context object for the
+ * new PCI_Config operation region, however.
+ */
+ status = AE_OK;
+ } else {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Could not install PciConfig handler for Root Bridge %4.4s",
+ acpi_ut_get_node_name
+ (pci_root_node)));
}
- break;
}
+ break;
}
pci_root_node = acpi_ns_get_parent_node(pci_root_node);
/*
* For PCI_Config space access, we need the segment, bus,
* device and function numbers. Acquire them here.
+ *
+ * Find the parent device object. (This allows the operation region to be
+ * within a subscope under the device, such as a control method.)
*/
+ pci_device_node = region_obj->region.node;
+ while (pci_device_node && (pci_device_node->type != ACPI_TYPE_DEVICE)) {
+ pci_device_node = acpi_ns_get_parent_node(pci_device_node);
+ }
+
+ if (!pci_device_node) {
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
/*
* Get the PCI device and function numbers from the _ADR object
* contained in the parent's scope.
*/
status =
- acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, parent_node,
+ acpi_ut_evaluate_numeric_object(METHOD_NAME__ADR, pci_device_node,
&pci_value);
/*
return_ACPI_STATUS(AE_OK);
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_match_pci_root_bridge
+ *
+ * PARAMETERS: Id - The HID/CID in string format
+ *
+ * RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input ID is a PCI Root Bridge ID.
+ *
+ ******************************************************************************/
+
+static u8 acpi_ev_match_pci_root_bridge(char *id)
+{
+
+ /*
+ * Check if this is a PCI root.
+ * ACPI 3.0+: check for a PCI Express root also.
+ */
+ if (!(ACPI_STRNCMP(id,
+ PCI_ROOT_HID_STRING,
+ sizeof(PCI_ROOT_HID_STRING))) ||
+ !(ACPI_STRNCMP(id,
+ PCI_EXPRESS_ROOT_HID_STRING,
+ sizeof(PCI_EXPRESS_ROOT_HID_STRING)))) {
+ return (TRUE);
+ }
+
+ return (FALSE);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_is_pci_root_bridge
+ *
+ * PARAMETERS: Node - Device node being examined
+ *
+ * RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
+ *
+ * DESCRIPTION: Determine if the input device represents a PCI Root Bridge by
+ * examining the _HID and _CID for the device.
+ *
+ ******************************************************************************/
+
+static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
+{
+ acpi_status status;
+ struct acpi_device_id hid;
+ struct acpi_compatible_id_list *cid;
+ acpi_native_uint i;
+
+ /*
+ * Get the _HID and check for a PCI Root Bridge
+ */
+ status = acpi_ut_execute_HID(node, &hid);
+ if (ACPI_FAILURE(status)) {
+ return (FALSE);
+ }
+
+ if (acpi_ev_match_pci_root_bridge(hid.value)) {
+ return (TRUE);
+ }
+
+ /*
+ * The _HID did not match.
+ * Get the _CID and check for a PCI Root Bridge
+ */
+ status = acpi_ut_execute_CID(node, &cid);
+ if (ACPI_FAILURE(status)) {
+ return (FALSE);
+ }
+
+ /* Check all _CIDs in the returned list */
+
+ for (i = 0; i < cid->count; i++) {
+ if (acpi_ev_match_pci_root_bridge(cid->id[i].value)) {
+ ACPI_FREE(cid);
+ return (TRUE);
+ }
+ }
+
+ ACPI_FREE(cid);
+ return (FALSE);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_pci_bar_region_setup
* a PCI address in the scope of the definition. This address is
* required to perform an access to PCI config space.
*
+ * MUTEX: Interpreter should be unlocked, because we may run the _REG
+ * method for this region.
+ *
******************************************************************************/
acpi_status
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_FUNCTION_TRACE(ev_install_sci_handler);
- status = acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT->sci_int,
- acpi_ev_sci_xrupt_handler,
- acpi_gbl_gpe_xrupt_list_head);
+ status =
+ acpi_os_install_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
+ acpi_ev_sci_xrupt_handler,
+ acpi_gbl_gpe_xrupt_list_head);
return_ACPI_STATUS(status);
}
/* Just let the OS remove the handler and disable the level */
- status = acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT->sci_int,
- acpi_ev_sci_xrupt_handler);
+ status =
+ acpi_os_remove_interrupt_handler((u32) acpi_gbl_FADT.sci_interrupt,
+ acpi_ev_sci_xrupt_handler);
return_ACPI_STATUS(status);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
return (AE_BAD_PARAMETER);
}
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ /* Must lock interpreter to prevent race conditions */
+ acpi_ex_enter_interpreter();
status = acpi_ev_acquire_global_lock(timeout);
acpi_ex_exit_interpreter();
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acevents.h>
#include <acpi/acnamesp.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_EVENTS
ACPI_MODULE_NAME("evxfevnt")
ACPI_FUNCTION_TRACE(acpi_enable);
- /* Make sure we have the FADT */
+ /* ACPI tables must be present */
- if (!acpi_gbl_FADT) {
- ACPI_WARNING((AE_INFO, "No FADT information present!"));
+ if (!acpi_tb_tables_loaded()) {
return_ACPI_STATUS(AE_NO_ACPI_TABLES);
}
+ /* Check current mode */
+
if (acpi_hw_get_mode() == ACPI_SYS_MODE_ACPI) {
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"System is already in ACPI mode\n"));
ACPI_FUNCTION_TRACE(acpi_disable);
- if (!acpi_gbl_FADT) {
- ACPI_WARNING((AE_INFO, "No FADT information present!"));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
if (acpi_hw_get_mode() == ACPI_SYS_MODE_LEGACY) {
ACPI_DEBUG_PRINT((ACPI_DB_INIT,
"System is already in legacy (non-ACPI) mode\n"));
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, 1, ACPI_MTX_LOCK);
+ enable_register_id, 1);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status =
acpi_get_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, &value, ACPI_MTX_LOCK);
+ enable_register_id, &value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, 0, ACPI_MTX_LOCK);
+ enable_register_id, 0);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
status =
acpi_get_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, &value, ACPI_MTX_LOCK);
+ enable_register_id, &value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
*/
status =
acpi_set_register(acpi_gbl_fixed_event_info[event].
- status_register_id, 1, ACPI_MTX_LOCK);
+ status_register_id, 1);
return_ACPI_STATUS(status);
}
status =
acpi_get_register(acpi_gbl_fixed_event_info[event].
- status_register_id, event_status, ACPI_MTX_LOCK);
+ status_register_id, event_status);
return_ACPI_STATUS(status);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Local prototypes */
static acpi_status
-acpi_ex_add_table(struct acpi_table_header *table,
+acpi_ex_add_table(acpi_native_uint table_index,
struct acpi_namespace_node *parent_node,
union acpi_operand_object **ddb_handle);
******************************************************************************/
static acpi_status
-acpi_ex_add_table(struct acpi_table_header *table,
+acpi_ex_add_table(acpi_native_uint table_index,
struct acpi_namespace_node *parent_node,
union acpi_operand_object **ddb_handle)
{
acpi_status status;
- struct acpi_table_desc table_info;
union acpi_operand_object *obj_desc;
ACPI_FUNCTION_TRACE(ex_add_table);
/* Install the new table into the local data structures */
- ACPI_MEMSET(&table_info, 0, sizeof(struct acpi_table_desc));
-
- table_info.type = ACPI_TABLE_ID_SSDT;
- table_info.pointer = table;
- table_info.length = (acpi_size) table->length;
- table_info.allocation = ACPI_MEM_ALLOCATED;
-
- status = acpi_tb_install_table(&table_info);
- obj_desc->reference.object = table_info.installed_desc;
-
- if (ACPI_FAILURE(status)) {
- if (status == AE_ALREADY_EXISTS) {
-
- /* Table already exists, just return the handle */
-
- return_ACPI_STATUS(AE_OK);
- }
- goto cleanup;
- }
+ obj_desc->reference.object = ACPI_CAST_PTR(void, table_index);
/* Add the table to the namespace */
- status = acpi_ns_load_table(table_info.installed_desc, parent_node);
+ status = acpi_ns_load_table(table_index, parent_node);
if (ACPI_FAILURE(status)) {
-
- /* Uninstall table on error */
-
- (void)acpi_tb_uninstall_table(table_info.installed_desc);
- goto cleanup;
+ acpi_ut_remove_reference(obj_desc);
+ *ddb_handle = NULL;
}
- return_ACPI_STATUS(AE_OK);
-
- cleanup:
- acpi_ut_remove_reference(obj_desc);
- *ddb_handle = NULL;
return_ACPI_STATUS(status);
}
*
* RETURN: Status
*
- * DESCRIPTION: Load an ACPI table
+ * DESCRIPTION: Load an ACPI table from the RSDT/XSDT
*
******************************************************************************/
{
acpi_status status;
union acpi_operand_object **operand = &walk_state->operands[0];
- struct acpi_table_header *table;
+ acpi_native_uint table_index;
struct acpi_namespace_node *parent_node;
struct acpi_namespace_node *start_node;
struct acpi_namespace_node *parameter_node = NULL;
union acpi_operand_object *ddb_handle;
+ struct acpi_table_header *table;
ACPI_FUNCTION_TRACE(ex_load_table_op);
-#if 0
- /*
- * Make sure that the signature does not match one of the tables that
- * is already loaded.
- */
- status = acpi_tb_match_signature(operand[0]->string.pointer, NULL);
- if (status == AE_OK) {
-
- /* Signature matched -- don't allow override */
-
- return_ACPI_STATUS(AE_ALREADY_EXISTS);
- }
-#endif
-
- /* Find the ACPI table */
+ /* Find the ACPI table in the RSDT/XSDT */
status = acpi_tb_find_table(operand[0]->string.pointer,
operand[1]->string.pointer,
- operand[2]->string.pointer, &table);
+ operand[2]->string.pointer, &table_index);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
return_ACPI_STATUS(status);
/* Load the table into the namespace */
- status = acpi_ex_add_table(table, parent_node, &ddb_handle);
+ status = acpi_ex_add_table(table_index, parent_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
}
}
- ACPI_INFO((AE_INFO,
- "Dynamic OEM Table Load - [%4.4s] OemId [%6.6s] OemTableId [%8.8s]",
- table->signature, table->oem_id, table->oem_table_id));
+ status = acpi_get_table_by_index(table_index, &table);
+ if (ACPI_SUCCESS(status)) {
+ ACPI_INFO((AE_INFO,
+ "Dynamic OEM Table Load - [%4.4s] OemId [%6.6s] OemTableId [%8.8s]",
+ table->signature, table->oem_id,
+ table->oem_table_id));
+ }
*return_desc = ddb_handle;
return_ACPI_STATUS(status);
*
* FUNCTION: acpi_ex_load_op
*
- * PARAMETERS: obj_desc - Region or Field where the table will be
+ * PARAMETERS: obj_desc - Region or Buffer/Field where the table will be
* obtained
* Target - Where a handle to the table will be stored
* walk_state - Current state
*
* DESCRIPTION: Load an ACPI table from a field or operation region
*
+ * NOTE: Region Fields (Field, bank_field, index_fields) are resolved to buffer
+ * objects before this code is reached.
+ *
+ * If source is an operation region, it must refer to system_memory, as
+ * per the ACPI specification.
+ *
******************************************************************************/
acpi_status
union acpi_operand_object *target,
struct acpi_walk_state *walk_state)
{
- acpi_status status;
union acpi_operand_object *ddb_handle;
- union acpi_operand_object *buffer_desc = NULL;
- struct acpi_table_header *table_ptr = NULL;
- acpi_physical_address address;
- struct acpi_table_header table_header;
- acpi_integer temp;
- u32 i;
+ struct acpi_table_desc table_desc;
+ acpi_native_uint table_index;
+ acpi_status status;
ACPI_FUNCTION_TRACE(ex_load_op);
- /* Object can be either an op_region or a Field */
+ ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
+
+ /* Source Object can be either an op_region or a Buffer/Field */
switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
case ACPI_TYPE_REGION:
+ /* Region must be system_memory (from ACPI spec) */
+
+ if (obj_desc->region.space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Load from Region %p %s\n",
obj_desc,
acpi_ut_get_object_type_name(obj_desc)));
}
}
- /* Get the base physical address of the region */
-
- address = obj_desc->region.address;
-
- /* Get part of the table header to get the table length */
-
- table_header.length = 0;
- for (i = 0; i < 8; i++) {
- status =
- acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
- (acpi_physical_address)
- (i + address), 8,
- &temp);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get the one valid byte of the returned 64-bit value */
-
- ACPI_CAST_PTR(u8, &table_header)[i] = (u8) temp;
- }
-
- /* Sanity check the table length */
-
- if (table_header.length < sizeof(struct acpi_table_header)) {
- return_ACPI_STATUS(AE_BAD_HEADER);
- }
-
- /* Allocate a buffer for the entire table */
-
- table_ptr = ACPI_ALLOCATE(table_header.length);
- if (!table_ptr) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Get the entire table from the op region */
-
- for (i = 0; i < table_header.length; i++) {
- status =
- acpi_ev_address_space_dispatch(obj_desc, ACPI_READ,
- (acpi_physical_address)
- (i + address), 8,
- &temp);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- /* Get the one valid byte of the returned 64-bit value */
-
- ACPI_CAST_PTR(u8, table_ptr)[i] = (u8) temp;
- }
+ table_desc.address = obj_desc->region.address;
+ table_desc.length = obj_desc->region.length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_MAPPED;
break;
- case ACPI_TYPE_LOCAL_REGION_FIELD:
- case ACPI_TYPE_LOCAL_BANK_FIELD:
- case ACPI_TYPE_LOCAL_INDEX_FIELD:
+ case ACPI_TYPE_BUFFER: /* Buffer or resolved region_field */
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Load from Field %p %s\n",
- obj_desc,
- acpi_ut_get_object_type_name(obj_desc)));
+ /* Simply extract the buffer from the buffer object */
- /*
- * The length of the field must be at least as large as the table.
- * Read the entire field and thus the entire table. Buffer is
- * allocated during the read.
- */
- status =
- acpi_ex_read_data_from_field(walk_state, obj_desc,
- &buffer_desc);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- table_ptr = ACPI_CAST_PTR(struct acpi_table_header,
- buffer_desc->buffer.pointer);
-
- /* All done with the buffer_desc, delete it */
-
- buffer_desc->buffer.pointer = NULL;
- acpi_ut_remove_reference(buffer_desc);
+ ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
+ "Load from Buffer or Field %p %s\n", obj_desc,
+ acpi_ut_get_object_type_name(obj_desc)));
- /* Sanity check the table length */
+ table_desc.pointer = ACPI_CAST_PTR(struct acpi_table_header,
+ obj_desc->buffer.pointer);
+ table_desc.length = table_desc.pointer->length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_ALLOCATED;
- if (table_ptr->length < sizeof(struct acpi_table_header)) {
- status = AE_BAD_HEADER;
- goto cleanup;
- }
+ obj_desc->buffer.pointer = NULL;
break;
default:
return_ACPI_STATUS(AE_AML_OPERAND_TYPE);
}
- /* The table must be either an SSDT or a PSDT */
-
- if ((!ACPI_COMPARE_NAME(table_ptr->signature, PSDT_SIG)) &&
- (!ACPI_COMPARE_NAME(table_ptr->signature, SSDT_SIG))) {
- ACPI_ERROR((AE_INFO,
- "Table has invalid signature [%4.4s], must be SSDT or PSDT",
- table_ptr->signature));
- status = AE_BAD_SIGNATURE;
+ /*
+ * Install the new table into the local data structures
+ */
+ status = acpi_tb_add_table(&table_desc, &table_index);
+ if (ACPI_FAILURE(status)) {
goto cleanup;
}
- /* Install the new table into the local data structures */
-
- status = acpi_ex_add_table(table_ptr, acpi_gbl_root_node, &ddb_handle);
+ status =
+ acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle);
if (ACPI_FAILURE(status)) {
/* On error, table_ptr was deallocated above */
return_ACPI_STATUS(status);
}
- ACPI_INFO((AE_INFO,
- "Dynamic SSDT Load - OemId [%6.6s] OemTableId [%8.8s]",
- table_ptr->oem_id, table_ptr->oem_table_id));
-
cleanup:
if (ACPI_FAILURE(status)) {
- ACPI_FREE(table_ptr);
+ acpi_tb_delete_table(&table_desc);
}
return_ACPI_STATUS(status);
}
{
acpi_status status = AE_OK;
union acpi_operand_object *table_desc = ddb_handle;
- struct acpi_table_desc *table_info;
+ acpi_native_uint table_index;
ACPI_FUNCTION_TRACE(ex_unload_table);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Get the actual table descriptor from the ddb_handle */
+ /* Get the table index from the ddb_handle */
- table_info = (struct acpi_table_desc *)table_desc->reference.object;
+ table_index = (acpi_native_uint) table_desc->reference.object;
/*
* Delete the entire namespace under this table Node
* (Offset contains the table_id)
*/
- acpi_ns_delete_namespace_by_owner(table_info->owner_id);
-
- /* Delete the table itself */
+ acpi_tb_delete_namespace_by_owner(table_index);
+ acpi_tb_release_owner_id(table_index);
- (void)acpi_tb_uninstall_table(table_info->installed_desc);
+ acpi_tb_set_table_loaded_flag(table_index, FALSE);
/* Delete the table descriptor (ddb_handle) */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
union acpi_operand_object **operand = &walk_state->operands[0];
union acpi_operand_object *obj_desc;
struct acpi_namespace_node *node;
- struct acpi_table_header *table;
union acpi_operand_object *region_obj2;
+ acpi_native_uint table_index;
+ struct acpi_table_header *table;
ACPI_FUNCTION_TRACE(ex_create_table_region);
status = acpi_tb_find_table(operand[1]->string.pointer,
operand[2]->string.pointer,
- operand[3]->string.pointer, &table);
+ operand[3]->string.pointer, &table_index);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
region_obj2 = obj_desc->common.next_object;
region_obj2->extra.region_context = NULL;
+ status = acpi_get_table_by_index(table_index, &table);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
/* Init the region from the operands */
obj_desc->region.space_id = REGION_DATA_TABLE;
obj_desc = acpi_ut_create_internal_object(ACPI_TYPE_METHOD);
if (!obj_desc) {
- return_ACPI_STATUS(AE_NO_MEMORY);
+ status = AE_NO_MEMORY;
+ goto exit;
}
/* Save the method's AML pointer and length */
* Get the sync_level. If method is serialized, a mutex will be
* created for this method when it is parsed.
*/
- if (acpi_gbl_all_methods_serialized) {
- obj_desc->method.sync_level = 0;
- obj_desc->method.method_flags |= AML_METHOD_SERIALIZED;
- } else if (method_flags & AML_METHOD_SERIALIZED) {
+ if (method_flags & AML_METHOD_SERIALIZED) {
/*
* ACPI 1.0: sync_level = 0
* ACPI 2.0: sync_level = sync_level in method declaration
acpi_ut_remove_reference(obj_desc);
+ exit:
/* Remove a reference to the operand */
acpi_ut_remove_reference(operand[1]);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
static void acpi_ex_out_pointer(char *title, void *value);
-static void acpi_ex_out_address(char *title, acpi_physical_address value);
-
static void
acpi_ex_dump_object(union acpi_operand_object *obj_desc,
struct acpi_exdump_info *info);
{ACPI_EXD_STRING, 0, NULL}
};
-static struct acpi_exdump_info acpi_ex_dump_buffer[4] = {
+static struct acpi_exdump_info acpi_ex_dump_buffer[5] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_buffer), NULL},
{ACPI_EXD_UINT32, ACPI_EXD_OFFSET(buffer.length), "Length"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer.pointer), "Pointer"},
+ {ACPI_EXD_POINTER, ACPI_EXD_OFFSET(buffer.node), "Parent Node"},
{ACPI_EXD_BUFFER, 0, NULL}
};
static struct acpi_exdump_info acpi_ex_dump_processor[7] = {
{ACPI_EXD_INIT, ACPI_EXD_TABLE_SIZE(acpi_ex_dump_processor), NULL},
- {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
- {ACPI_EXD_UINT32, ACPI_EXD_OFFSET(processor.length), "Length"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.proc_id), "Processor ID"},
+ {ACPI_EXD_UINT8, ACPI_EXD_OFFSET(processor.length), "Length"},
{ACPI_EXD_ADDRESS, ACPI_EXD_OFFSET(processor.address), "Address"},
{ACPI_EXD_POINTER, ACPI_EXD_OFFSET(processor.system_notify),
"System Notify"},
break;
case ACPI_EXD_POINTER:
+ case ACPI_EXD_ADDRESS:
acpi_ex_out_pointer(name,
*ACPI_CAST_PTR(void *, target));
break;
- case ACPI_EXD_ADDRESS:
-
- acpi_ex_out_address(name,
- *ACPI_CAST_PTR
- (acpi_physical_address, target));
- break;
-
case ACPI_EXD_STRING:
acpi_ut_print_string(obj_desc->string.pointer,
acpi_os_printf("%20s : %p\n", title, value);
}
-static void acpi_ex_out_address(char *title, acpi_physical_address value)
-{
-
-#if ACPI_MACHINE_WIDTH == 16
- acpi_os_printf("%20s : %p\n", title, value);
-#else
- acpi_os_printf("%20s : %8.8X%8.8X\n", title, ACPI_FORMAT_UINT64(value));
-#endif
-}
-
/*******************************************************************************
*
* FUNCTION: acpi_ex_dump_namespace_node
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
ACPI_DEBUG_PRINT_RAW((ACPI_DB_BFIELD,
- " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %8.8X%8.8X\n",
+ " Region [%s:%X], Width %X, ByteBase %X, Offset %X at %p\n",
acpi_ut_get_region_name(rgn_desc->region.
space_id),
rgn_desc->region.space_id,
obj_desc->common_field.access_byte_width,
obj_desc->common_field.base_byte_offset,
- field_datum_byte_offset,
- ACPI_FORMAT_UINT64(address)));
+ field_datum_byte_offset, (void *)address));
/* Invoke the appropriate address_space/op_region handler */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acinterp.h>
+#include <acpi/acevents.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME("exmutex")
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Sanity check -- we must have a valid thread ID */
+ /* Sanity check: we must have a valid thread ID */
if (!walk_state->thread) {
ACPI_ERROR((AE_INFO,
/* Support for multiple acquires by the owning thread */
if (obj_desc->mutex.owner_thread) {
-
- /* Special case for Global Lock, allow all threads */
-
- if ((obj_desc->mutex.owner_thread->thread_id ==
- walk_state->thread->thread_id) ||
- (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK)) {
+ if (obj_desc->mutex.owner_thread->thread_id ==
+ walk_state->thread->thread_id) {
/*
- * The mutex is already owned by this thread,
- * just increment the acquisition depth
+ * The mutex is already owned by this thread, just increment the
+ * acquisition depth
*/
obj_desc->mutex.acquisition_depth++;
return_ACPI_STATUS(AE_OK);
}
}
- /* Acquire the mutex, wait if necessary */
+ /* Acquire the mutex, wait if necessary. Special case for Global Lock */
+
+ if (obj_desc->mutex.os_mutex == acpi_gbl_global_lock_mutex) {
+ status =
+ acpi_ev_acquire_global_lock((u16) time_desc->integer.value);
+ } else {
+ status = acpi_ex_system_wait_mutex(obj_desc->mutex.os_mutex,
+ (u16) time_desc->integer.
+ value);
+ }
- status = acpi_ex_system_acquire_mutex(time_desc, obj_desc);
if (ACPI_FAILURE(status)) {
/* Includes failure from a timeout on time_desc */
/* Link the mutex to the current thread for force-unlock at method exit */
acpi_ex_link_mutex(obj_desc, walk_state->thread);
-
return_ACPI_STATUS(AE_OK);
}
acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
struct acpi_walk_state *walk_state)
{
- acpi_status status;
+ acpi_status status = AE_OK;
ACPI_FUNCTION_TRACE(ex_release_mutex);
return_ACPI_STATUS(AE_AML_MUTEX_NOT_ACQUIRED);
}
- /* Sanity check -- we must have a valid thread ID */
+ /* Sanity check: we must have a valid thread ID */
if (!walk_state->thread) {
ACPI_ERROR((AE_INFO,
*/
if ((obj_desc->mutex.owner_thread->thread_id !=
walk_state->thread->thread_id)
- && (obj_desc->mutex.os_mutex != ACPI_GLOBAL_LOCK)) {
+ && (obj_desc->mutex.os_mutex != acpi_gbl_global_lock_mutex)) {
ACPI_ERROR((AE_INFO,
"Thread %lX cannot release Mutex [%4.4s] acquired by thread %lX",
(unsigned long)walk_state->thread->thread_id,
}
/*
- * The sync level of the mutex must be less than or
- * equal to the current sync level
+ * The sync level of the mutex must be less than or equal to the current
+ * sync level
*/
if (obj_desc->mutex.sync_level > walk_state->thread->current_sync_level) {
ACPI_ERROR((AE_INFO,
acpi_ex_unlink_mutex(obj_desc);
- /* Release the mutex */
+ /* Release the mutex, special case for Global Lock */
- status = acpi_ex_system_release_mutex(obj_desc);
+ if (obj_desc->mutex.os_mutex == acpi_gbl_global_lock_mutex) {
+ status = acpi_ev_release_global_lock();
+ } else {
+ acpi_os_release_mutex(obj_desc->mutex.os_mutex);
+ }
- /* Update the mutex and walk state, restore sync_level before acquire */
+ /* Update the mutex and restore sync_level */
obj_desc->mutex.owner_thread = NULL;
walk_state->thread->current_sync_level =
*
* DESCRIPTION: Release all mutexes held by this thread
*
+ * NOTE: This function is called as the thread is exiting the interpreter.
+ * Mutexes are not released when an individual control method is exited, but
+ * only when the parent thread actually exits the interpreter. This allows one
+ * method to acquire a mutex, and a different method to release it, as long as
+ * this is performed underneath a single parent control method.
+ *
******************************************************************************/
void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread)
{
union acpi_operand_object *next = thread->acquired_mutex_list;
- union acpi_operand_object *this;
- acpi_status status;
+ union acpi_operand_object *obj_desc;
ACPI_FUNCTION_ENTRY();
/* Traverse the list of owned mutexes, releasing each one */
while (next) {
- this = next;
- next = this->mutex.next;
+ obj_desc = next;
+ next = obj_desc->mutex.next;
+
+ obj_desc->mutex.prev = NULL;
+ obj_desc->mutex.next = NULL;
+ obj_desc->mutex.acquisition_depth = 0;
+
+ /* Release the mutex, special case for Global Lock */
- this->mutex.acquisition_depth = 1;
- this->mutex.prev = NULL;
- this->mutex.next = NULL;
+ if (obj_desc->mutex.os_mutex == acpi_gbl_global_lock_mutex) {
- /* Release the mutex */
+ /* Ignore errors */
- status = acpi_ex_system_release_mutex(this);
- if (ACPI_FAILURE(status)) {
- continue;
+ (void)acpi_ev_release_global_lock();
+ } else {
+ acpi_os_release_mutex(obj_desc->mutex.os_mutex);
}
/* Mark mutex unowned */
- this->mutex.owner_thread = NULL;
+ obj_desc->mutex.owner_thread = NULL;
/* Update Thread sync_level (Last mutex is the important one) */
- thread->current_sync_level = this->mutex.original_sync_level;
+ thread->current_sync_level =
+ obj_desc->mutex.original_sync_level;
}
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
status = AE_NO_MEMORY;
goto cleanup;
}
-#if ACPI_MACHINE_WIDTH != 16
return_desc->integer.value = acpi_os_get_timer();
-#endif
break;
default: /* Unknown opcode */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Create a new mapping starting at the address given */
- status = acpi_os_map_memory(address, window_size,
- (void **)&mem_info->
- mapped_logical_address);
- if (ACPI_FAILURE(status)) {
+ mem_info->mapped_logical_address =
+ acpi_os_map_memory((acpi_native_uint) address, window_size);
+ if (!mem_info->mapped_logical_address) {
ACPI_ERROR((AE_INFO,
"Could not map memory at %8.8X%8.8X, size %X",
ACPI_FORMAT_UINT64(address),
(u32) window_size));
mem_info->mapped_length = 0;
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
/* Save the physical address and mapping size */
*value = (acpi_integer) ACPI_GET32(logical_addr_ptr);
break;
-#if ACPI_MACHINE_WIDTH != 16
case 64:
*value = (acpi_integer) ACPI_GET64(logical_addr_ptr);
break;
-#endif
+
default:
/* bit_width was already validated */
break;
ACPI_SET32(logical_addr_ptr) = (u32) * value;
break;
-#if ACPI_MACHINE_WIDTH != 16
case 64:
ACPI_SET64(logical_addr_ptr) = (u64) * value;
break;
-#endif
default:
/* bit_width was already validated */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status status = AE_OK;
union acpi_operand_object *stack_desc;
void *temp_node;
- union acpi_operand_object *obj_desc;
+ union acpi_operand_object *obj_desc = NULL;
u16 opcode;
ACPI_FUNCTION_TRACE(ex_resolve_object_to_value);
status = acpi_ds_get_package_arguments(stack_desc);
break;
- /* These cases may never happen here, but just in case.. */
-
case ACPI_TYPE_BUFFER_FIELD:
case ACPI_TYPE_LOCAL_REGION_FIELD:
case ACPI_TYPE_LOCAL_BANK_FIELD:
status =
acpi_ex_read_data_from_field(walk_state, stack_desc,
&obj_desc);
+
+ /* Remove a reference to the original operand, then override */
+
+ acpi_ut_remove_reference(*stack_ptr);
*stack_ptr = (void *)obj_desc;
break;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
goto next_operand;
- case ARGI_REGION_OR_FIELD:
+ case ARGI_REGION_OR_BUFFER: /* Used by Load() only */
- /* Need an operand of type REGION or a FIELD in a region */
+ /* Need an operand of type REGION or a BUFFER (which could be a resolved region field) */
switch (ACPI_GET_OBJECT_TYPE(obj_desc)) {
+ case ACPI_TYPE_BUFFER:
case ACPI_TYPE_REGION:
- case ACPI_TYPE_LOCAL_REGION_FIELD:
- case ACPI_TYPE_LOCAL_BANK_FIELD:
- case ACPI_TYPE_LOCAL_INDEX_FIELD:
/* Valid operand */
break;
default:
ACPI_ERROR((AE_INFO,
- "Needed [Region/RegionField], found [%s] %p",
+ "Needed [Region/Buffer], found [%s] %p",
acpi_ut_get_object_type_name
(obj_desc), obj_desc));
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_semaphore);
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_wait_semaphore(semaphore, 1, timeout);
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
acpi_status acpi_ex_system_wait_mutex(acpi_mutex mutex, u16 timeout)
{
acpi_status status;
- acpi_status status2;
ACPI_FUNCTION_TRACE(ex_system_wait_mutex);
/* We must wait, so unlock the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
status = acpi_os_acquire_mutex(mutex, timeout);
/* Reacquire the interpreter */
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status2)) {
-
- /* Report fatal error, could not acquire interpreter */
-
- return_ACPI_STATUS(status2);
- }
+ acpi_ex_reacquire_interpreter();
}
return_ACPI_STATUS(status);
acpi_status acpi_ex_system_do_suspend(acpi_integer how_long)
{
- acpi_status status;
-
ACPI_FUNCTION_ENTRY();
/* Since this thread will sleep, we must release the interpreter */
- acpi_ex_exit_interpreter();
+ acpi_ex_relinquish_interpreter();
acpi_os_sleep(how_long);
/* And now we must get the interpreter again */
- status = acpi_ex_enter_interpreter();
- return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ex_system_acquire_mutex
- *
- * PARAMETERS: time_desc - Maximum time to wait for the mutex
- * obj_desc - The object descriptor for this op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Provides an access point to perform synchronization operations
- * within the AML. This function will cause a lock to be generated
- * for the Mutex pointed to by obj_desc.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ex_system_acquire_mutex(union acpi_operand_object * time_desc,
- union acpi_operand_object * obj_desc)
-{
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE_PTR(ex_system_acquire_mutex, obj_desc);
-
- if (!obj_desc) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Support for the _GL_ Mutex object -- go get the global lock */
-
- if (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK) {
- status =
- acpi_ev_acquire_global_lock((u16) time_desc->integer.value);
- return_ACPI_STATUS(status);
- }
-
- status = acpi_ex_system_wait_mutex(obj_desc->mutex.os_mutex,
- (u16) time_desc->integer.value);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ex_system_release_mutex
- *
- * PARAMETERS: obj_desc - The object descriptor for this op
- *
- * RETURN: Status
- *
- * DESCRIPTION: Provides an access point to perform synchronization operations
- * within the AML. This operation is a request to release a
- * previously acquired Mutex. If the Mutex variable is set then
- * it will be decremented.
- *
- ******************************************************************************/
-
-acpi_status acpi_ex_system_release_mutex(union acpi_operand_object *obj_desc)
-{
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE(ex_system_release_mutex);
-
- if (!obj_desc) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Support for the _GL_ Mutex object -- release the global lock */
-
- if (obj_desc->mutex.os_mutex == ACPI_GLOBAL_LOCK) {
- status = acpi_ev_release_global_lock();
- return_ACPI_STATUS(status);
- }
-
- acpi_os_release_mutex(obj_desc->mutex.os_mutex);
- return_ACPI_STATUS(AE_OK);
+ acpi_ex_reacquire_interpreter();
+ return (AE_OK);
}
/*******************************************************************************
*
******************************************************************************/
-acpi_status acpi_ex_system_signal_event(union acpi_operand_object *obj_desc)
+acpi_status acpi_ex_system_signal_event(union acpi_operand_object * obj_desc)
{
acpi_status status = AE_OK;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*
* PARAMETERS: None
*
- * RETURN: Status
+ * RETURN: None
*
- * DESCRIPTION: Enter the interpreter execution region. Failure to enter
- * the interpreter region is a fatal system error
+ * DESCRIPTION: Enter the interpreter execution region. Failure to enter
+ * the interpreter region is a fatal system error. Used in
+ * conjunction with exit_interpreter.
*
******************************************************************************/
-acpi_status acpi_ex_enter_interpreter(void)
+void acpi_ex_enter_interpreter(void)
{
acpi_status status;
status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not acquire interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not acquire AML Interpreter mutex"));
}
- return_ACPI_STATUS(status);
+ return_VOID;
}
/*******************************************************************************
*
- * FUNCTION: acpi_ex_exit_interpreter
+ * FUNCTION: acpi_ex_reacquire_interpreter
*
* PARAMETERS: None
*
* RETURN: None
*
- * DESCRIPTION: Exit the interpreter execution region
+ * DESCRIPTION: Reacquire the interpreter execution region from within the
+ * interpreter code. Failure to enter the interpreter region is a
+ * fatal system error. Used in conjuction with
+ * relinquish_interpreter
+ *
+ ******************************************************************************/
+
+void acpi_ex_reacquire_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_reacquire_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter,
+ * since it was not actually released by acpi_ex_relinquish_interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_enter_interpreter();
+ }
+
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_exit_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
*
- * Cases where the interpreter is unlocked:
- * 1) Completion of the execution of a control method
- * 2) Method blocked on a Sleep() AML opcode
- * 3) Method blocked on an Acquire() AML opcode
- * 4) Method blocked on a Wait() AML opcode
- * 5) Method blocked to acquire the global lock
- * 6) Method blocked to execute a serialized control method that is
- * already executing
- * 7) About to invoke a user-installed opregion handler
+ * DESCRIPTION: Exit the interpreter execution region. This is the top level
+ * routine used to exit the interpreter when all processing has
+ * been completed.
*
******************************************************************************/
status = acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not release interpreter mutex"));
+ ACPI_ERROR((AE_INFO,
+ "Could not release AML Interpreter mutex"));
+ }
+
+ return_VOID;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ex_relinquish_interpreter
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Exit the interpreter execution region, from within the
+ * interpreter - before attempting an operation that will possibly
+ * block the running thread.
+ *
+ * Cases where the interpreter is unlocked internally
+ * 1) Method to be blocked on a Sleep() AML opcode
+ * 2) Method to be blocked on an Acquire() AML opcode
+ * 3) Method to be blocked on a Wait() AML opcode
+ * 4) Method to be blocked to acquire the global lock
+ * 5) Method to be blocked waiting to execute a serialized control method
+ * that is currently executing
+ * 6) About to invoke a user-installed opregion handler
+ *
+ ******************************************************************************/
+
+void acpi_ex_relinquish_interpreter(void)
+{
+ ACPI_FUNCTION_TRACE(ex_relinquish_interpreter);
+
+ /*
+ * If the global serialized flag is set, do not release the interpreter.
+ * This forces the interpreter to be single threaded.
+ */
+ if (!acpi_gbl_all_methods_serialized) {
+ acpi_ex_exit_interpreter();
}
return_VOID;
*
* RETURN: none
*
- * DESCRIPTION: Truncate a number to 32-bits if the currently executing method
- * belongs to a 32-bit ACPI table.
+ * DESCRIPTION: Truncate an ACPI Integer to 32 bits if the execution mode is
+ * 32-bit, as determined by the revision of the DSDT.
*
******************************************************************************/
static int acpi_fan_add(struct acpi_device *device);
static int acpi_fan_remove(struct acpi_device *device, int type);
-static int acpi_fan_suspend(struct acpi_device *device, int state);
-static int acpi_fan_resume(struct acpi_device *device, int state);
+static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state);
+static int acpi_fan_resume(struct acpi_device *device);
static struct acpi_driver acpi_fan_driver = {
.name = ACPI_FAN_DRIVER_NAME,
return 0;
}
-static int acpi_fan_suspend(struct acpi_device *device, int state)
+static int acpi_fan_suspend(struct acpi_device *device, pm_message_t state)
{
if (!device)
return -EINVAL;
return AE_OK;
}
-static int acpi_fan_resume(struct acpi_device *device, int state)
+static int acpi_fan_resume(struct acpi_device *device)
{
int result = 0;
int power_state = 0;
return ret;
}
-/* Get PCI root bridge's handle from its segment and bus number */
-struct acpi_find_pci_root {
- unsigned int seg;
- unsigned int bus;
- acpi_handle handle;
-};
-
-static acpi_status
-do_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
-{
- unsigned long *busnr = data;
- struct acpi_resource_address64 address;
-
- if (resource->type != ACPI_RESOURCE_TYPE_ADDRESS16 &&
- resource->type != ACPI_RESOURCE_TYPE_ADDRESS32 &&
- resource->type != ACPI_RESOURCE_TYPE_ADDRESS64)
- return AE_OK;
-
- acpi_resource_to_address64(resource, &address);
- if ((address.address_length > 0) &&
- (address.resource_type == ACPI_BUS_NUMBER_RANGE))
- *busnr = address.minimum;
-
- return AE_OK;
-}
-
-static int get_root_bridge_busnr(acpi_handle handle)
-{
- acpi_status status;
- unsigned long bus, bbn;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-
- status = acpi_evaluate_integer(handle, METHOD_NAME__BBN, NULL,
- &bbn);
- if (status == AE_NOT_FOUND) {
- /* Assume bus = 0 */
- printk(KERN_INFO PREFIX
- "Assume root bridge [%s] bus is 0\n",
- (char *)buffer.pointer);
- status = AE_OK;
- bbn = 0;
- }
- if (ACPI_FAILURE(status)) {
- bbn = -ENODEV;
- goto exit;
- }
- if (bbn > 0)
- goto exit;
-
- /* _BBN in some systems return 0 for all root bridges */
- bus = -1;
- status = acpi_walk_resources(handle, METHOD_NAME__CRS,
- do_root_bridge_busnr_callback, &bus);
- /* If _CRS failed, we just use _BBN */
- if (ACPI_FAILURE(status) || (bus == -1))
- goto exit;
- /* We select _CRS */
- if (bbn != bus) {
- printk(KERN_INFO PREFIX
- "_BBN and _CRS returns different value for %s. Select _CRS\n",
- (char *)buffer.pointer);
- bbn = bus;
- }
- exit:
- kfree(buffer.pointer);
- return (int)bbn;
-}
-
-static acpi_status
-find_pci_rootbridge(acpi_handle handle, u32 lvl, void *context, void **rv)
-{
- struct acpi_find_pci_root *find = (struct acpi_find_pci_root *)context;
- unsigned long seg, bus;
- acpi_status status;
- int tmp;
- struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
-
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
-
- status = acpi_evaluate_integer(handle, METHOD_NAME__SEG, NULL, &seg);
- if (status == AE_NOT_FOUND) {
- /* Assume seg = 0 */
- status = AE_OK;
- seg = 0;
- }
- if (ACPI_FAILURE(status)) {
- status = AE_CTRL_DEPTH;
- goto exit;
- }
-
- tmp = get_root_bridge_busnr(handle);
- if (tmp < 0) {
- printk(KERN_ERR PREFIX
- "Find root bridge failed for %s\n",
- (char *)buffer.pointer);
- status = AE_CTRL_DEPTH;
- goto exit;
- }
- bus = tmp;
-
- if (seg == find->seg && bus == find->bus)
- {
- find->handle = handle;
- status = AE_CTRL_TERMINATE;
- }
- else
- status = AE_OK;
- exit:
- kfree(buffer.pointer);
- return status;
-}
-
-acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
-{
- struct acpi_find_pci_root find = { seg, bus, NULL };
-
- acpi_get_devices(PCI_ROOT_HID_STRING, find_pci_rootbridge, &find, NULL);
- return find.handle;
-}
-EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
-
/* Get device's handler per its address under its parent */
struct acpi_find_child {
acpi_handle handle;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwacpi")
-/******************************************************************************
- *
- * FUNCTION: acpi_hw_initialize
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Initialize and validate the various ACPI registers defined in
- * the FADT.
- *
- ******************************************************************************/
-acpi_status acpi_hw_initialize(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(hw_initialize);
-
- /* We must have the ACPI tables by the time we get here */
-
- if (!acpi_gbl_FADT) {
- ACPI_ERROR((AE_INFO, "No FADT is present"));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
- /* Sanity check the FADT for valid values */
-
- status = acpi_ut_validate_fadt();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
/******************************************************************************
*
* FUNCTION: acpi_hw_set_mode
* DESCRIPTION: Transitions the system into the requested mode.
*
******************************************************************************/
-
acpi_status acpi_hw_set_mode(u32 mode)
{
* ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
* system does not support mode transition.
*/
- if (!acpi_gbl_FADT->smi_cmd) {
+ if (!acpi_gbl_FADT.smi_command) {
ACPI_ERROR((AE_INFO,
"No SMI_CMD in FADT, mode transition failed"));
return_ACPI_STATUS(AE_NO_HARDWARE_RESPONSE);
* we make sure both the numbers are zero to determine these
* transitions are not supported.
*/
- if (!acpi_gbl_FADT->acpi_enable && !acpi_gbl_FADT->acpi_disable) {
+ if (!acpi_gbl_FADT.acpi_enable && !acpi_gbl_FADT.acpi_disable) {
ACPI_ERROR((AE_INFO,
"No ACPI mode transition supported in this system (enable/disable both zero)"));
return_ACPI_STATUS(AE_OK);
/* BIOS should have disabled ALL fixed and GP events */
- status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd,
- (u32) acpi_gbl_FADT->acpi_enable,
- 8);
+ status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+ (u32) acpi_gbl_FADT.acpi_enable, 8);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Attempting to enable ACPI mode\n"));
break;
* BIOS should clear all fixed status bits and restore fixed event
* enable bits to default
*/
- status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd,
- (u32) acpi_gbl_FADT->acpi_disable,
+ status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+ (u32) acpi_gbl_FADT.acpi_disable,
8);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Attempting to enable Legacy (non-ACPI) mode\n"));
* ACPI 2.0 clarified that if SMI_CMD in FADT is zero,
* system does not support mode transition.
*/
- if (!acpi_gbl_FADT->smi_cmd) {
+ if (!acpi_gbl_FADT.smi_command) {
return_UINT32(ACPI_SYS_MODE_ACPI);
}
- status =
- acpi_get_register(ACPI_BITREG_SCI_ENABLE, &value, ACPI_MTX_LOCK);
+ status = acpi_get_register(ACPI_BITREG_SCI_ENABLE, &value);
if (ACPI_FAILURE(status)) {
return_UINT32(ACPI_SYS_MODE_LEGACY);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status acpi_hw_clear_gpe(struct acpi_gpe_event_info * gpe_event_info)
{
acpi_status status;
+ u8 register_bit;
ACPI_FUNCTION_ENTRY();
+ register_bit = (u8)
+ (1 <<
+ (gpe_event_info->gpe_number -
+ gpe_event_info->register_info->base_gpe_number));
+
/*
* Write a one to the appropriate bit in the status register to
* clear this GPE.
*/
- status = acpi_hw_low_level_write(8, gpe_event_info->register_bit,
+ status = acpi_hw_low_level_write(8, register_bit,
&gpe_event_info->register_info->
status_address);
/* Get the register bitmask for this GPE */
- register_bit = gpe_event_info->register_bit;
+ register_bit = (u8)
+ (1 <<
+ (gpe_event_info->gpe_number -
+ gpe_event_info->register_info->base_gpe_number));
/* GPE currently enabled? (enabled for runtime?) */
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*
* FUNCTION: acpi_hw_clear_acpi_status
*
- * PARAMETERS: Flags - Lock the hardware or not
+ * PARAMETERS: None
*
- * RETURN: none
+ * RETURN: None
*
* DESCRIPTION: Clears all fixed and general purpose status bits
* THIS FUNCTION MUST BE CALLED WITH INTERRUPTS DISABLED
*
- * NOTE: TBD: Flags parameter is obsolete, to be removed
- *
******************************************************************************/
-acpi_status acpi_hw_clear_acpi_status(u32 flags)
+acpi_status acpi_hw_clear_acpi_status(void)
{
acpi_status status;
acpi_cpu_flags lock_flags = 0;
ACPI_DEBUG_PRINT((ACPI_DB_IO, "About to write %04X to %04X\n",
ACPI_BITMASK_ALL_FIXED_STATUS,
- (u16) acpi_gbl_FADT->xpm1a_evt_blk.address));
+ (u16) acpi_gbl_FADT.xpm1a_event_block.address));
lock_flags = acpi_os_acquire_lock(acpi_gbl_hardware_lock);
/* Clear the fixed events */
- if (acpi_gbl_FADT->xpm1b_evt_blk.address) {
+ if (acpi_gbl_FADT.xpm1b_event_block.address) {
status =
acpi_hw_low_level_write(16, ACPI_BITMASK_ALL_FIXED_STATUS,
- &acpi_gbl_FADT->xpm1b_evt_blk);
+ &acpi_gbl_FADT.xpm1b_event_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
*
* PARAMETERS: register_id - ID of ACPI bit_register to access
* return_value - Value that was read from the register
- * Flags - Lock the hardware or not
*
* RETURN: Status and the value read from specified Register. Value
* returned is normalized to bit0 (is shifted all the way right)
*
* DESCRIPTION: ACPI bit_register read function.
*
- * NOTE: TBD: Flags parameter is obsolete, to be removed
- *
******************************************************************************/
-acpi_status acpi_get_register(u32 register_id, u32 * return_value, u32 flags)
+acpi_status acpi_get_register(u32 register_id, u32 * return_value)
{
u32 register_value = 0;
struct acpi_bit_register_info *bit_reg_info;
* PARAMETERS: register_id - ID of ACPI bit_register to access
* Value - (only used on write) value to write to the
* Register, NOT pre-normalized to the bit pos
- * Flags - Lock the hardware or not
*
* RETURN: Status
*
* DESCRIPTION: ACPI Bit Register write function.
*
- * NOTE: TBD: Flags parameter is obsolete, to be removed
- *
******************************************************************************/
-acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags)
+acpi_status acpi_set_register(u32 register_id, u32 value)
{
u32 register_value = 0;
struct acpi_bit_register_info *bit_reg_info;
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"PM2 control: Read %X from %8.8X%8.8X\n",
register_value,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT->
- xpm2_cnt_blk.address)));
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.
+ xpm2_control_block.
+ address)));
ACPI_REGISTER_INSERT_VALUE(register_value,
bit_reg_info->bit_position,
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"About to write %4.4X to %8.8X%8.8X\n",
register_value,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT->
- xpm2_cnt_blk.address)));
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.
+ xpm2_control_block.
+ address)));
status = acpi_hw_register_write(ACPI_MTX_DO_NOT_LOCK,
ACPI_REGISTER_PM2_CONTROL,
status =
acpi_hw_low_level_read(16, &value1,
- &acpi_gbl_FADT->xpm1a_evt_blk);
+ &acpi_gbl_FADT.xpm1a_event_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
status =
acpi_hw_low_level_read(16, &value2,
- &acpi_gbl_FADT->xpm1b_evt_blk);
+ &acpi_gbl_FADT.xpm1b_event_block);
value1 |= value2;
break;
status =
acpi_hw_low_level_read(16, &value1,
- &acpi_gbl_FADT->xpm1a_cnt_blk);
+ &acpi_gbl_FADT.xpm1a_control_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
status =
acpi_hw_low_level_read(16, &value2,
- &acpi_gbl_FADT->xpm1b_cnt_blk);
+ &acpi_gbl_FADT.xpm1b_control_block);
value1 |= value2;
break;
status =
acpi_hw_low_level_read(8, &value1,
- &acpi_gbl_FADT->xpm2_cnt_blk);
+ &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
status =
acpi_hw_low_level_read(32, &value1,
- &acpi_gbl_FADT->xpm_tmr_blk);
+ &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
- status = acpi_os_read_port(acpi_gbl_FADT->smi_cmd, &value1, 8);
+ status =
+ acpi_os_read_port(acpi_gbl_FADT.smi_command, &value1, 8);
break;
default:
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1a_evt_blk);
+ &acpi_gbl_FADT.xpm1a_event_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1b_evt_blk);
+ &acpi_gbl_FADT.xpm1b_event_block);
break;
case ACPI_REGISTER_PM1_ENABLE: /* 16-bit access */
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1a_cnt_blk);
+ &acpi_gbl_FADT.xpm1a_control_block);
if (ACPI_FAILURE(status)) {
goto unlock_and_exit;
}
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1b_cnt_blk);
+ &acpi_gbl_FADT.xpm1b_control_block);
break;
case ACPI_REGISTER_PM1A_CONTROL: /* 16-bit access */
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1a_cnt_blk);
+ &acpi_gbl_FADT.xpm1a_control_block);
break;
case ACPI_REGISTER_PM1B_CONTROL: /* 16-bit access */
status =
acpi_hw_low_level_write(16, value,
- &acpi_gbl_FADT->xpm1b_cnt_blk);
+ &acpi_gbl_FADT.xpm1b_control_block);
break;
case ACPI_REGISTER_PM2_CONTROL: /* 8-bit access */
status =
acpi_hw_low_level_write(8, value,
- &acpi_gbl_FADT->xpm2_cnt_blk);
+ &acpi_gbl_FADT.xpm2_control_block);
break;
case ACPI_REGISTER_PM_TIMER: /* 32-bit access */
status =
acpi_hw_low_level_write(32, value,
- &acpi_gbl_FADT->xpm_tmr_blk);
+ &acpi_gbl_FADT.xpm_timer_block);
break;
case ACPI_REGISTER_SMI_COMMAND_BLOCK: /* 8-bit access */
/* SMI_CMD is currently always in IO space */
- status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd, value, 8);
+ status =
+ acpi_os_write_port(acpi_gbl_FADT.smi_command, value, 8);
break;
default:
* Two address spaces supported: Memory or IO.
* PCI_Config is not supported here because the GAS struct is insufficient
*/
- switch (reg->address_space_id) {
+ switch (reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
status = acpi_os_read_memory((acpi_physical_address) address,
case ACPI_ADR_SPACE_SYSTEM_IO:
- status = acpi_os_read_port((acpi_io_address) address,
- value, width);
+ status =
+ acpi_os_read_port((acpi_io_address) address, value, width);
break;
default:
ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X",
- reg->address_space_id));
+ "Unsupported address space: %X", reg->space_id));
return (AE_BAD_PARAMETER);
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"Read: %8.8X width %2d from %8.8X%8.8X (%s)\n",
- *value, width,
- ACPI_FORMAT_UINT64(address),
- acpi_ut_get_region_name(reg->address_space_id)));
+ *value, width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
return (status);
}
* Two address spaces supported: Memory or IO.
* PCI_Config is not supported here because the GAS struct is insufficient
*/
- switch (reg->address_space_id) {
+ switch (reg->space_id) {
case ACPI_ADR_SPACE_SYSTEM_MEMORY:
status = acpi_os_write_memory((acpi_physical_address) address,
case ACPI_ADR_SPACE_SYSTEM_IO:
- status = acpi_os_write_port((acpi_io_address) address,
- value, width);
+ status = acpi_os_write_port((acpi_io_address) address, value,
+ width);
break;
default:
ACPI_ERROR((AE_INFO,
- "Unsupported address space: %X",
- reg->address_space_id));
+ "Unsupported address space: %X", reg->space_id));
return (AE_BAD_PARAMETER);
}
ACPI_DEBUG_PRINT((ACPI_DB_IO,
"Wrote: %8.8X width %2d to %8.8X%8.8X (%s)\n",
- value, width,
- ACPI_FORMAT_UINT64(address),
- acpi_ut_get_region_name(reg->address_space_id)));
+ value, width, ACPI_FORMAT_UINT64(address),
+ acpi_ut_get_region_name(reg->space_id)));
return (status);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*/
#include <acpi/acpi.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_HARDWARE
ACPI_MODULE_NAME("hwsleep")
acpi_status
acpi_set_firmware_waking_vector(acpi_physical_address physical_address)
{
+ struct acpi_table_facs *facs;
+ acpi_status status;
ACPI_FUNCTION_TRACE(acpi_set_firmware_waking_vector);
+ /* Get the FACS */
+
+ status =
+ acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
+ (struct acpi_table_header **)&facs);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
/* Set the vector */
- if (acpi_gbl_common_fACS.vector_width == 32) {
- *(ACPI_CAST_PTR
- (u32, acpi_gbl_common_fACS.firmware_waking_vector))
- = (u32) physical_address;
+ if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
+ /*
+ * ACPI 1.0 FACS or short table or optional X_ field is zero
+ */
+ facs->firmware_waking_vector = (u32) physical_address;
} else {
- *acpi_gbl_common_fACS.firmware_waking_vector = physical_address;
+ /*
+ * ACPI 2.0 FACS with valid X_ field
+ */
+ facs->xfirmware_waking_vector = physical_address;
}
return_ACPI_STATUS(AE_OK);
acpi_status
acpi_get_firmware_waking_vector(acpi_physical_address * physical_address)
{
+ struct acpi_table_facs *facs;
+ acpi_status status;
ACPI_FUNCTION_TRACE(acpi_get_firmware_waking_vector);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
+ /* Get the FACS */
+
+ status =
+ acpi_get_table_by_index(ACPI_TABLE_INDEX_FACS,
+ (struct acpi_table_header **)&facs);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
/* Get the vector */
- if (acpi_gbl_common_fACS.vector_width == 32) {
- *physical_address = (acpi_physical_address)
- *
- (ACPI_CAST_PTR
- (u32, acpi_gbl_common_fACS.firmware_waking_vector));
+ if ((facs->length < 32) || (!(facs->xfirmware_waking_vector))) {
+ /*
+ * ACPI 1.0 FACS or short table or optional X_ field is zero
+ */
+ *physical_address =
+ (acpi_physical_address) facs->firmware_waking_vector;
} else {
+ /*
+ * ACPI 2.0 FACS with valid X_ field
+ */
*physical_address =
- *acpi_gbl_common_fACS.firmware_waking_vector;
+ (acpi_physical_address) facs->xfirmware_waking_vector;
}
return_ACPI_STATUS(AE_OK);
/* Clear wake status */
- status =
- acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Clear all fixed and general purpose status bits */
- status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_hw_clear_acpi_status();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/* Wait until we enter sleep state */
do {
- status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value,
- ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
ACPI_FUNCTION_TRACE(acpi_enter_sleep_state_s4bios);
- status =
- acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1, ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_set_register(ACPI_BITREG_WAKE_STATUS, 1);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- status = acpi_hw_clear_acpi_status(ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_hw_clear_acpi_status();
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
ACPI_FLUSH_CPU_CACHE();
- status = acpi_os_write_port(acpi_gbl_FADT->smi_cmd,
- (u32) acpi_gbl_FADT->S4bios_req, 8);
+ status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+ (u32) acpi_gbl_FADT.S4bios_request, 8);
do {
acpi_os_stall(1000);
- status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value,
- ACPI_MTX_DO_NOT_LOCK);
+ status = acpi_get_register(ACPI_BITREG_WAKE_STATUS, &in_value);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
(void)
acpi_set_register(acpi_gbl_fixed_event_info
- [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ [ACPI_EVENT_POWER_BUTTON].enable_register_id, 1);
(void)
acpi_set_register(acpi_gbl_fixed_event_info
- [ACPI_EVENT_POWER_BUTTON].status_register_id, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ [ACPI_EVENT_POWER_BUTTON].status_register_id, 1);
arg.integer.value = ACPI_SST_WORKING;
status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- if (acpi_gbl_FADT->tmr_val_ext == 0) {
+ if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) {
*resolution = 24;
} else {
*resolution = 32;
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- status = acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT->xpm_tmr_blk);
+ status =
+ acpi_hw_low_level_read(32, ticks, &acpi_gbl_FADT.xpm_timer_block);
return_ACPI_STATUS(status);
}
if (start_ticks < end_ticks) {
delta_ticks = end_ticks - start_ticks;
} else if (start_ticks > end_ticks) {
- if (acpi_gbl_FADT->tmr_val_ext == 0) {
+ if ((acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) == 0) {
/* 24-bit Timer */
+++ /dev/null
-/*
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or (at
- * your option) any later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
- *
- * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
- */
-
-/* Purpose: Prevent PCMCIA cards from using motherboard resources. */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ioport.h>
-#include <asm/io.h>
-
-#include <acpi/acpi_bus.h>
-#include <acpi/acpi_drivers.h>
-
-#define _COMPONENT ACPI_SYSTEM_COMPONENT
-ACPI_MODULE_NAME("acpi_motherboard")
-
-/* Dell use PNP0C01 instead of PNP0C02 */
-#define ACPI_MB_HID1 "PNP0C01"
-#define ACPI_MB_HID2 "PNP0C02"
-/**
- * Doesn't care about legacy IO ports, only IO ports beyond 0x1000 are reserved
- * Doesn't care about the failure of 'request_region', since other may reserve
- * the io ports as well
- */
-#define IS_RESERVED_ADDR(base, len) \
- (((len) > 0) && ((base) > 0) && ((base) + (len) < IO_SPACE_LIMIT) \
- && ((base) + (len) > PCIBIOS_MIN_IO))
-/*
- * Clearing the flag (IORESOURCE_BUSY) allows drivers to use
- * the io ports if they really know they can use it, while
- * still preventing hotplug PCI devices from using it.
- */
-
-/*
- * When CONFIG_PNP is enabled, pnp/system.c binds to PNP0C01
- * and PNP0C02, redundant with acpi_reserve_io_ranges().
- * But acpi_reserve_io_ranges() is necessary for !CONFIG_PNP.
- */
-static acpi_status acpi_reserve_io_ranges(struct acpi_resource *res, void *data)
-{
- struct resource *requested_res = NULL;
-
-
- if (res->type == ACPI_RESOURCE_TYPE_IO) {
- struct acpi_resource_io *io_res = &res->data.io;
-
- if (io_res->minimum != io_res->maximum)
- return AE_OK;
- if (IS_RESERVED_ADDR
- (io_res->minimum, io_res->address_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Motherboard resources 0x%08x - 0x%08x\n",
- io_res->minimum,
- io_res->minimum +
- io_res->address_length));
- requested_res =
- request_region(io_res->minimum,
- io_res->address_length, "motherboard");
- }
- } else if (res->type == ACPI_RESOURCE_TYPE_FIXED_IO) {
- struct acpi_resource_fixed_io *fixed_io_res =
- &res->data.fixed_io;
-
- if (IS_RESERVED_ADDR
- (fixed_io_res->address, fixed_io_res->address_length)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Motherboard resources 0x%08x - 0x%08x\n",
- fixed_io_res->address,
- fixed_io_res->address +
- fixed_io_res->address_length));
- requested_res =
- request_region(fixed_io_res->address,
- fixed_io_res->address_length,
- "motherboard");
- }
- } else {
- /* Memory mapped IO? */
- }
-
- if (requested_res)
- requested_res->flags &= ~IORESOURCE_BUSY;
- return AE_OK;
-}
-
-static int acpi_motherboard_add(struct acpi_device *device)
-{
- if (!device)
- return -EINVAL;
- acpi_walk_resources(device->handle, METHOD_NAME__CRS,
- acpi_reserve_io_ranges, NULL);
-
- return 0;
-}
-
-static struct acpi_driver acpi_motherboard_driver1 = {
- .name = "motherboard",
- .class = "",
- .ids = ACPI_MB_HID1,
- .ops = {
- .add = acpi_motherboard_add,
- },
-};
-
-static struct acpi_driver acpi_motherboard_driver2 = {
- .name = "motherboard",
- .class = "",
- .ids = ACPI_MB_HID2,
- .ops = {
- .add = acpi_motherboard_add,
- },
-};
-
-static void __init acpi_request_region (struct acpi_generic_address *addr,
- unsigned int length, char *desc)
-{
- if (!addr->address || !length)
- return;
-
- if (addr->address_space_id == ACPI_ADR_SPACE_SYSTEM_IO)
- request_region(addr->address, length, desc);
- else if (addr->address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
- request_mem_region(addr->address, length, desc);
-}
-
-static void __init acpi_reserve_resources(void)
-{
- acpi_request_region(&acpi_gbl_FADT->xpm1a_evt_blk,
- acpi_gbl_FADT->pm1_evt_len, "ACPI PM1a_EVT_BLK");
-
- acpi_request_region(&acpi_gbl_FADT->xpm1b_evt_blk,
- acpi_gbl_FADT->pm1_evt_len, "ACPI PM1b_EVT_BLK");
-
- acpi_request_region(&acpi_gbl_FADT->xpm1a_cnt_blk,
- acpi_gbl_FADT->pm1_cnt_len, "ACPI PM1a_CNT_BLK");
-
- acpi_request_region(&acpi_gbl_FADT->xpm1b_cnt_blk,
- acpi_gbl_FADT->pm1_cnt_len, "ACPI PM1b_CNT_BLK");
-
- if (acpi_gbl_FADT->pm_tm_len == 4)
- acpi_request_region(&acpi_gbl_FADT->xpm_tmr_blk, 4, "ACPI PM_TMR");
-
- acpi_request_region(&acpi_gbl_FADT->xpm2_cnt_blk,
- acpi_gbl_FADT->pm2_cnt_len, "ACPI PM2_CNT_BLK");
-
- /* Length of GPE blocks must be a non-negative multiple of 2 */
-
- if (!(acpi_gbl_FADT->gpe0_blk_len & 0x1))
- acpi_request_region(&acpi_gbl_FADT->xgpe0_blk,
- acpi_gbl_FADT->gpe0_blk_len, "ACPI GPE0_BLK");
-
- if (!(acpi_gbl_FADT->gpe1_blk_len & 0x1))
- acpi_request_region(&acpi_gbl_FADT->xgpe1_blk,
- acpi_gbl_FADT->gpe1_blk_len, "ACPI GPE1_BLK");
-}
-
-static int __init acpi_motherboard_init(void)
-{
- acpi_bus_register_driver(&acpi_motherboard_driver1);
- acpi_bus_register_driver(&acpi_motherboard_driver2);
- /*
- * Guarantee motherboard IO reservation first
- * This module must run after scan.c
- */
- if (!acpi_disabled)
- acpi_reserve_resources();
- return 0;
-}
-
-/**
- * Reserve motherboard resources after PCI claim BARs,
- * but before PCI assign resources for uninitialized PCI devices
- */
-fs_initcall(acpi_motherboard_init);
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
obj_desc->mutex.sync_level =
(u8) (ACPI_TO_INTEGER(val) - 1);
- if (ACPI_STRCMP(init_val->name, "_GL_") == 0) {
+ /* Create a mutex */
- /* Create a counting semaphore for the global lock */
+ status =
+ acpi_os_create_mutex(&obj_desc->mutex.
+ os_mutex);
+ if (ACPI_FAILURE(status)) {
+ acpi_ut_remove_reference(obj_desc);
+ goto unlock_and_exit;
+ }
- status =
- acpi_os_create_semaphore
- (ACPI_NO_UNIT_LIMIT, 1,
- &acpi_gbl_global_lock_semaphore);
- if (ACPI_FAILURE(status)) {
- acpi_ut_remove_reference
- (obj_desc);
- goto unlock_and_exit;
- }
+ /* Special case for ACPI Global Lock */
- /* Mark this mutex as very special */
+ if (ACPI_STRCMP(init_val->name, "_GL_") == 0) {
+ acpi_gbl_global_lock_mutex =
+ obj_desc->mutex.os_mutex;
- obj_desc->mutex.os_mutex =
- ACPI_GLOBAL_LOCK;
- } else {
- /* Create a mutex */
+ /* Create additional counting semaphore for global lock */
status =
- acpi_os_create_mutex(&obj_desc->
- mutex.
- os_mutex);
+ acpi_os_create_semaphore(1, 0,
+ &acpi_gbl_global_lock_semaphore);
if (ACPI_FAILURE(status)) {
acpi_ut_remove_reference
(obj_desc);
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct acpi_namespace_node *acpi_ns_create_node(u32 name)
{
struct acpi_namespace_node *node;
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ u32 temp;
+#endif
ACPI_FUNCTION_TRACE(ns_create_node);
ACPI_MEM_TRACKING(acpi_gbl_ns_node_list->total_allocated++);
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ temp =
+ acpi_gbl_ns_node_list->total_allocated -
+ acpi_gbl_ns_node_list->total_freed;
+ if (temp > acpi_gbl_ns_node_list->max_occupied) {
+ acpi_gbl_ns_node_list->max_occupied = temp;
+ }
+#endif
+
node->name.integer = name;
ACPI_SET_DESCRIPTOR_TYPE(node, ACPI_DESC_TYPE_NAMED);
return_PTR(node);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
if (!acpi_ut_valid_acpi_name(this_node->name.integer)) {
this_node->name.integer =
- acpi_ut_repair_name(this_node->name.integer);
+ acpi_ut_repair_name(this_node->name.ascii);
ACPI_WARNING((AE_INFO, "Invalid ACPI Name %08X",
this_node->name.integer));
obj_desc = acpi_ns_get_attached_object(this_node);
acpi_dbg_level = dbg_level;
+ /* Temp nodes are those nodes created by a control method */
+
+ if (this_node->flags & ANOBJ_TEMPORARY) {
+ acpi_os_printf("(T) ");
+ }
+
switch (info->display_type & ACPI_DISPLAY_MASK) {
case ACPI_DISPLAY_SUMMARY:
info.display_type = display_type;
(void)acpi_ns_walk_namespace(type, start_handle, max_depth,
- ACPI_NS_WALK_NO_UNLOCK,
+ ACPI_NS_WALK_NO_UNLOCK |
+ ACPI_NS_WALK_TEMP_NODES,
acpi_ns_dump_one_object, (void *)&info,
NULL);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Execute the method via the interpreter. The interpreter is locked
* here before calling into the AML parser
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
+ acpi_ex_enter_interpreter();
status = acpi_ps_execute_method(info);
acpi_ex_exit_interpreter();
} else {
* resolution, we must lock it because we could access an opregion.
* The opregion access code assumes that the interpreter is locked.
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ acpi_ex_enter_interpreter();
/* Function has a strange interface */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u32 level, void *context, void **return_value)
{
acpi_object_type type;
- acpi_status status;
+ acpi_status status = AE_OK;
struct acpi_init_walk_info *info =
(struct acpi_init_walk_info *)context;
struct acpi_namespace_node *node =
/*
* Must lock the interpreter before executing AML code
*/
- status = acpi_ex_enter_interpreter();
- if (ACPI_FAILURE(status)) {
- return (status);
- }
+ acpi_ex_enter_interpreter();
/*
* Each of these types can contain executable AML code within the
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#include <acpi/acdispat.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsload")
/* Local prototypes */
-static acpi_status acpi_ns_load_table_by_type(acpi_table_type table_type);
-
#ifdef ACPI_FUTURE_IMPLEMENTATION
acpi_status acpi_ns_unload_namespace(acpi_handle handle);
*
* FUNCTION: acpi_ns_load_table
*
- * PARAMETERS: table_desc - Descriptor for table to be loaded
+ * PARAMETERS: table_index - Index for table to be loaded
* Node - Owning NS node
*
* RETURN: Status
******************************************************************************/
acpi_status
-acpi_ns_load_table(struct acpi_table_desc *table_desc,
+acpi_ns_load_table(acpi_native_uint table_index,
struct acpi_namespace_node *node)
{
acpi_status status;
ACPI_FUNCTION_TRACE(ns_load_table);
- /* Check if table contains valid AML (must be DSDT, PSDT, SSDT, etc.) */
-
- if (!
- (acpi_gbl_table_data[table_desc->type].
- flags & ACPI_TABLE_EXECUTABLE)) {
-
- /* Just ignore this table */
-
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Check validity of the AML start and length */
-
- if (!table_desc->aml_start) {
- ACPI_ERROR((AE_INFO, "Null AML pointer"));
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "AML block at %p\n",
- table_desc->aml_start));
-
- /* Ignore table if there is no AML contained within */
-
- if (!table_desc->aml_length) {
- ACPI_WARNING((AE_INFO, "Zero-length AML block in table [%4.4s]",
- table_desc->pointer->signature));
- return_ACPI_STATUS(AE_OK);
- }
-
/*
* Parse the table and load the namespace with all named
* objects found within. Control methods are NOT parsed
* to another control method, we can't continue parsing
* because we don't know how many arguments to parse next!
*/
+ status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* If table already loaded into namespace, just return */
+
+ if (acpi_tb_is_table_loaded(table_index)) {
+ status = AE_ALREADY_EXISTS;
+ goto unlock;
+ }
+
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Loading table into namespace ****\n"));
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
+ status = acpi_tb_allocate_owner_id(table_index);
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ goto unlock;
+ }
+
+ status = acpi_ns_parse_table(table_index, node->child);
+ if (ACPI_SUCCESS(status)) {
+ acpi_tb_set_table_loaded_flag(table_index, TRUE);
+ } else {
+ acpi_tb_release_owner_id(table_index);
}
- status = acpi_ns_parse_table(table_desc, node->child);
+ unlock:
(void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
if (ACPI_FAILURE(status)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Begin Table Method Parsing and Object Initialization ****\n"));
- status = acpi_ds_initialize_objects(table_desc, node);
+ status = acpi_ds_initialize_objects(table_index, node);
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"**** Completed Table Method Parsing and Object Initialization ****\n"));
return_ACPI_STATUS(status);
}
-/*******************************************************************************
- *
- * FUNCTION: acpi_ns_load_table_by_type
- *
- * PARAMETERS: table_type - Id of the table type to load
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load an ACPI table or tables into the namespace. All tables
- * of the given type are loaded. The mechanism allows this
- * routine to be called repeatedly.
- *
- ******************************************************************************/
-
-static acpi_status acpi_ns_load_table_by_type(acpi_table_type table_type)
-{
- u32 i;
- acpi_status status;
- struct acpi_table_desc *table_desc;
-
- ACPI_FUNCTION_TRACE(ns_load_table_by_type);
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /*
- * Table types supported are:
- * DSDT (one), SSDT/PSDT (multiple)
- */
- switch (table_type) {
- case ACPI_TABLE_ID_DSDT:
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace load: DSDT\n"));
-
- table_desc = acpi_gbl_table_lists[ACPI_TABLE_ID_DSDT].next;
-
- /* If table already loaded into namespace, just return */
-
- if (table_desc->loaded_into_namespace) {
- goto unlock_and_exit;
- }
-
- /* Now load the single DSDT */
-
- status = acpi_ns_load_table(table_desc, acpi_gbl_root_node);
- if (ACPI_SUCCESS(status)) {
- table_desc->loaded_into_namespace = TRUE;
- }
- break;
-
- case ACPI_TABLE_ID_SSDT:
- case ACPI_TABLE_ID_PSDT:
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Namespace load: %d SSDT or PSDTs\n",
- acpi_gbl_table_lists[table_type].count));
-
- /*
- * Traverse list of SSDT or PSDT tables
- */
- table_desc = acpi_gbl_table_lists[table_type].next;
- for (i = 0; i < acpi_gbl_table_lists[table_type].count; i++) {
- /*
- * Only attempt to load table into namespace if it is not
- * already loaded!
- */
- if (!table_desc->loaded_into_namespace) {
- status =
- acpi_ns_load_table(table_desc,
- acpi_gbl_root_node);
- if (ACPI_FAILURE(status)) {
- break;
- }
-
- table_desc->loaded_into_namespace = TRUE;
- }
-
- table_desc = table_desc->next;
- }
- break;
-
- default:
- status = AE_SUPPORT;
- break;
- }
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- return_ACPI_STATUS(status);
-}
-
+#ifdef ACPI_OBSOLETE_FUNCTIONS
/*******************************************************************************
*
* FUNCTION: acpi_load_namespace
return_ACPI_STATUS(status);
}
+#endif
#ifdef ACPI_FUTURE_IMPLEMENTATION
/*******************************************************************************
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acnamesp.h>
#include <acpi/acparser.h>
#include <acpi/acdispat.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_NAMESPACE
ACPI_MODULE_NAME("nsparse")
*
******************************************************************************/
acpi_status
-acpi_ns_one_complete_parse(u8 pass_number, struct acpi_table_desc *table_desc)
+acpi_ns_one_complete_parse(acpi_native_uint pass_number,
+ acpi_native_uint table_index)
{
union acpi_parse_object *parse_root;
acpi_status status;
+ acpi_native_uint aml_length;
+ u8 *aml_start;
struct acpi_walk_state *walk_state;
+ struct acpi_table_header *table;
+ acpi_owner_id owner_id;
ACPI_FUNCTION_TRACE(ns_one_complete_parse);
+ status = acpi_tb_get_owner_id(table_index, &owner_id);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
/* Create and init a Root Node */
parse_root = acpi_ps_create_scope_op();
/* Create and initialize a new walk state */
- walk_state = acpi_ds_create_walk_state(table_desc->owner_id,
- NULL, NULL, NULL);
+ walk_state = acpi_ds_create_walk_state(owner_id, NULL, NULL, NULL);
if (!walk_state) {
acpi_ps_free_op(parse_root);
return_ACPI_STATUS(AE_NO_MEMORY);
}
- status = acpi_ds_init_aml_walk(walk_state, parse_root, NULL,
- table_desc->aml_start,
- table_desc->aml_length, NULL,
- pass_number);
+ status = acpi_get_table_by_index(table_index, &table);
+ if (ACPI_FAILURE(status)) {
+ acpi_ds_delete_walk_state(walk_state);
+ acpi_ps_free_op(parse_root);
+ return_ACPI_STATUS(status);
+ }
+
+ /* Table must consist of at least a complete header */
+
+ if (table->length < sizeof(struct acpi_table_header)) {
+ status = AE_BAD_HEADER;
+ } else {
+ aml_start = (u8 *) table + sizeof(struct acpi_table_header);
+ aml_length = table->length - sizeof(struct acpi_table_header);
+ status = acpi_ds_init_aml_walk(walk_state, parse_root, NULL,
+ aml_start, aml_length, NULL,
+ (u8) pass_number);
+ }
+
if (ACPI_FAILURE(status)) {
acpi_ds_delete_walk_state(walk_state);
+ acpi_ps_delete_parse_tree(parse_root);
return_ACPI_STATUS(status);
}
/* Parse the AML */
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "*PARSE* pass %d parse\n",
- pass_number));
+ (unsigned)pass_number));
status = acpi_ps_parse_aml(walk_state);
acpi_ps_delete_parse_tree(parse_root);
******************************************************************************/
acpi_status
-acpi_ns_parse_table(struct acpi_table_desc *table_desc,
+acpi_ns_parse_table(acpi_native_uint table_index,
struct acpi_namespace_node *start_node)
{
acpi_status status;
* each Parser Op subtree is deleted when it is finished. This saves
* a great deal of memory, and allows a small cache of parse objects
* to service the entire parse. The second pass of the parse then
- * performs another complete parse of the AML..
+ * performs another complete parse of the AML.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 1\n"));
- status = acpi_ns_one_complete_parse(1, table_desc);
+ status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS1, table_index);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
* parse objects are all cached.
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "**** Start pass 2\n"));
- status = acpi_ns_one_complete_parse(2, table_desc);
+ status = acpi_ns_one_complete_parse(ACPI_IMODE_LOAD_PASS2, table_index);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* even though there are a few bad names.
*/
if (!acpi_ut_valid_acpi_name(target_name)) {
- target_name = acpi_ut_repair_name(target_name);
+ target_name =
+ acpi_ut_repair_name(ACPI_CAST_PTR(char, &target_name));
/* Report warning only if in strict mode or debug mode */
}
#endif
+ if (flags & ACPI_NS_TEMPORARY) {
+ new_node->flags |= ANOBJ_TEMPORARY;
+ }
+
/* Install the new object into the parent's list of children */
acpi_ns_install_node(walk_state, node, new_node, type);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Namespace freed\n"));
-
- /*
- * 2) Now we can delete the ACPI tables
- */
- acpi_tb_delete_all_tables();
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
-
return_VOID;
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* PARAMETERS: Type - acpi_object_type to search for
* start_node - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
- * unlock_before_callback- Whether to unlock the NS before invoking
+ * Flags - Whether to unlock the NS before invoking
* the callback routine
* user_function - Called when an object of "Type" is found
* Context - Passed to user function
acpi_ns_walk_namespace(acpi_object_type type,
acpi_handle start_node,
u32 max_depth,
- u8 unlock_before_callback,
+ u32 flags,
acpi_walk_callback user_function,
void *context, void **return_value)
{
acpi_ns_get_next_node(ACPI_TYPE_ANY, parent_node,
child_node);
if (child_node) {
- /*
- * Found node, Get the type if we are not
- * searching for ANY
- */
+
+ /* Found next child, get the type if we are not searching for ANY */
+
if (type != ACPI_TYPE_ANY) {
child_type = child_node->type;
}
- if (child_type == type) {
+ /*
+ * Ignore all temporary namespace nodes (created during control
+ * method execution) unless told otherwise. These temporary nodes
+ * can cause a race condition because they can be deleted during the
+ * execution of the user function (if the namespace is unlocked before
+ * invocation of the user function.) Only the debugger namespace dump
+ * will examine the temporary nodes.
+ */
+ if ((child_node->flags & ANOBJ_TEMPORARY) &&
+ !(flags & ACPI_NS_WALK_TEMP_NODES)) {
+ status = AE_CTRL_DEPTH;
+ }
+
+ /* Type must match requested type */
+
+ else if (child_type == type) {
/*
- * Found a matching node, invoke the user
- * callback function
+ * Found a matching node, invoke the user callback function.
+ * Unlock the namespace if flag is set.
*/
- if (unlock_before_callback) {
+ if (flags & ACPI_NS_WALK_UNLOCK) {
mutex_status =
acpi_ut_release_mutex
(ACPI_MTX_NAMESPACE);
}
}
- status = user_function(child_node, level,
- context, return_value);
+ status =
+ user_function(child_node, level, context,
+ return_value);
- if (unlock_before_callback) {
+ if (flags & ACPI_NS_WALK_UNLOCK) {
mutex_status =
acpi_ut_acquire_mutex
(ACPI_MTX_NAMESPACE);
}
/*
- * Depth first search:
- * Attempt to go down another level in the namespace
- * if we are allowed to. Don't go any further if we
- * have reached the caller specified maximum depth
- * or if the user function has specified that the
- * maximum depth has been reached.
+ * Depth first search: Attempt to go down another level in the
+ * namespace if we are allowed to. Don't go any further if we have
+ * reached the caller specified maximum depth or if the user
+ * function has specified that the maximum depth has been reached.
*/
if ((level < max_depth) && (status != AE_CTRL_DEPTH)) {
if (acpi_ns_get_next_node
(ACPI_TYPE_ANY, child_node, NULL)) {
- /*
- * There is at least one child of this
- * node, visit the onde
- */
+
+ /* There is at least one child of this node, visit it */
+
level++;
parent_node = child_node;
child_node = NULL;
}
} else {
/*
- * No more children of this node (acpi_ns_get_next_node
- * failed), go back upwards in the namespace tree to
- * the node's parent.
+ * No more children of this node (acpi_ns_get_next_node failed), go
+ * back upwards in the namespace tree to the node's parent.
*/
level--;
child_node = parent_node;
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
struct acpi_buffer *return_buffer)
{
acpi_status status;
- acpi_status status2;
struct acpi_evaluate_info *info;
acpi_size buffer_space_needed;
u32 i;
* Delete the internal return object. NOTE: Interpreter must be
* locked to avoid race condition.
*/
- status2 = acpi_ex_enter_interpreter();
- if (ACPI_SUCCESS(status2)) {
+ acpi_ex_enter_interpreter();
- /* Remove one reference on the return object (should delete it) */
+ /* Remove one reference on the return object (should delete it) */
- acpi_ut_remove_reference(info->return_object);
- acpi_ex_exit_interpreter();
- }
+ acpi_ut_remove_reference(info->return_object);
+ acpi_ex_exit_interpreter();
}
cleanup:
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Convert a parent handle to a prefix node */
if (parent) {
- status = acpi_ut_acquire_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return (status);
- }
-
prefix_node = acpi_ns_map_handle_to_node(parent);
if (!prefix_node) {
- (void)acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
return (AE_BAD_PARAMETER);
}
+ }
+
+ /*
+ * Valid cases are:
+ * 1) Fully qualified pathname
+ * 2) Parent + Relative pathname
+ *
+ * Error for <null Parent + relative path>
+ */
+ if (acpi_ns_valid_root_prefix(pathname[0])) {
- status = acpi_ut_release_mutex(ACPI_MTX_NAMESPACE);
- if (ACPI_FAILURE(status)) {
- return (status);
+ /* Pathname is fully qualified (starts with '\') */
+
+ /* Special case for root-only, since we can't search for it */
+
+ if (!ACPI_STRCMP(pathname, ACPI_NS_ROOT_PATH)) {
+ *ret_handle =
+ acpi_ns_convert_entry_to_handle(acpi_gbl_root_node);
+ return (AE_OK);
}
- }
+ } else if (!prefix_node) {
- /* Special case for root, since we can't search for it */
+ /* Relative path with null prefix is disallowed */
- if (ACPI_STRCMP(pathname, ACPI_NS_ROOT_PATH) == 0) {
- *ret_handle =
- acpi_ns_convert_entry_to_handle(acpi_gbl_root_node);
- return (AE_OK);
+ return (AE_BAD_PARAMETER);
}
- /*
- * Find the Node and convert to a handle
- */
- status = acpi_ns_get_node(prefix_node, pathname, ACPI_NS_NO_UPSEARCH,
- &node);
+ /* Find the Node and convert to a handle */
- *ret_handle = NULL;
+ status =
+ acpi_ns_get_node(prefix_node, pathname, ACPI_NS_NO_UPSEARCH, &node);
if (ACPI_SUCCESS(status)) {
*ret_handle = acpi_ns_convert_entry_to_handle(node);
}
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
int __cpuinitdata node_to_pxm_map[MAX_NUMNODES]
= { [0 ... MAX_NUMNODES - 1] = PXM_INVAL };
-extern int __init acpi_table_parse_madt_family(enum acpi_table_id id,
+extern int __init acpi_table_parse_madt_family(char *id,
unsigned long madt_size,
int entry_id,
acpi_madt_entry_handler handler,
node_clear(node, nodes_found_map);
}
-void __init acpi_table_print_srat_entry(acpi_table_entry_header * header)
+void __init acpi_table_print_srat_entry(struct acpi_subtable_header * header)
{
ACPI_FUNCTION_NAME("acpi_table_print_srat_entry");
switch (header->type) {
- case ACPI_SRAT_PROCESSOR_AFFINITY:
+ case ACPI_SRAT_TYPE_CPU_AFFINITY:
#ifdef ACPI_DEBUG_OUTPUT
{
- struct acpi_table_processor_affinity *p =
- (struct acpi_table_processor_affinity *)header;
+ struct acpi_srat_cpu_affinity *p =
+ (struct acpi_srat_cpu_affinity *)header;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"SRAT Processor (id[0x%02x] eid[0x%02x]) in proximity domain %d %s\n",
- p->apic_id, p->lsapic_eid,
- p->proximity_domain,
- p->flags.
- enabled ? "enabled" : "disabled"));
+ p->apic_id, p->local_sapic_eid,
+ p->proximity_domain_lo,
+ (p->flags & ACPI_SRAT_CPU_ENABLED)?
+ "enabled" : "disabled"));
}
#endif /* ACPI_DEBUG_OUTPUT */
break;
- case ACPI_SRAT_MEMORY_AFFINITY:
+ case ACPI_SRAT_TYPE_MEMORY_AFFINITY:
#ifdef ACPI_DEBUG_OUTPUT
{
- struct acpi_table_memory_affinity *p =
- (struct acpi_table_memory_affinity *)header;
+ struct acpi_srat_mem_affinity *p =
+ (struct acpi_srat_mem_affinity *)header;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "SRAT Memory (0x%08x%08x length 0x%08x%08x type 0x%x) in proximity domain %d %s%s\n",
- p->base_addr_hi, p->base_addr_lo,
- p->length_hi, p->length_lo,
+ "SRAT Memory (0x%lx length 0x%lx type 0x%x) in proximity domain %d %s%s\n",
+ (unsigned long)p->base_address,
+ (unsigned long)p->length,
p->memory_type, p->proximity_domain,
- p->flags.
- enabled ? "enabled" : "disabled",
- p->flags.
- hot_pluggable ? " hot-pluggable" :
- ""));
+ (p->flags & ACPI_SRAT_MEM_ENABLED)?
+ "enabled" : "disabled",
+ (p->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE)?
+ " hot-pluggable" : ""));
}
#endif /* ACPI_DEBUG_OUTPUT */
break;
}
}
-static int __init acpi_parse_slit(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_slit(struct acpi_table_header *table)
{
struct acpi_table_slit *slit;
u32 localities;
- if (!phys_addr || !size)
+ if (!table)
return -EINVAL;
- slit = (struct acpi_table_slit *)__va(phys_addr);
+ slit = (struct acpi_table_slit *)table;
/* downcast just for %llu vs %lu for i386/ia64 */
- localities = (u32) slit->localities;
+ localities = (u32) slit->locality_count;
acpi_numa_slit_init(slit);
}
static int __init
-acpi_parse_processor_affinity(acpi_table_entry_header * header,
+acpi_parse_processor_affinity(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_processor_affinity *processor_affinity;
+ struct acpi_srat_cpu_affinity *processor_affinity;
- processor_affinity = (struct acpi_table_processor_affinity *)header;
+ processor_affinity = (struct acpi_srat_cpu_affinity *)header;
if (!processor_affinity)
return -EINVAL;
}
static int __init
-acpi_parse_memory_affinity(acpi_table_entry_header * header,
+acpi_parse_memory_affinity(struct acpi_subtable_header * header,
const unsigned long end)
{
- struct acpi_table_memory_affinity *memory_affinity;
+ struct acpi_srat_mem_affinity *memory_affinity;
- memory_affinity = (struct acpi_table_memory_affinity *)header;
+ memory_affinity = (struct acpi_srat_mem_affinity *)header;
if (!memory_affinity)
return -EINVAL;
return 0;
}
-static int __init acpi_parse_srat(unsigned long phys_addr, unsigned long size)
+static int __init acpi_parse_srat(struct acpi_table_header *table)
{
struct acpi_table_srat *srat;
- if (!phys_addr || !size)
+ if (!table)
return -EINVAL;
- srat = (struct acpi_table_srat *)__va(phys_addr);
+ srat = (struct acpi_table_srat *)table;
return 0;
}
int __init
-acpi_table_parse_srat(enum acpi_srat_entry_id id,
+acpi_table_parse_srat(enum acpi_srat_type id,
acpi_madt_entry_handler handler, unsigned int max_entries)
{
- return acpi_table_parse_madt_family(ACPI_SRAT,
+ return acpi_table_parse_madt_family(ACPI_SIG_SRAT,
sizeof(struct acpi_table_srat), id,
handler, max_entries);
}
int result;
/* SRAT: Static Resource Affinity Table */
- result = acpi_table_parse(ACPI_SRAT, acpi_parse_srat);
+ result = acpi_table_parse(ACPI_SIG_SRAT, acpi_parse_srat);
if (result > 0) {
- result = acpi_table_parse_srat(ACPI_SRAT_PROCESSOR_AFFINITY,
+ result = acpi_table_parse_srat(ACPI_SRAT_TYPE_CPU_AFFINITY,
acpi_parse_processor_affinity,
NR_CPUS);
- result = acpi_table_parse_srat(ACPI_SRAT_MEMORY_AFFINITY, acpi_parse_memory_affinity, NR_NODE_MEMBLKS); // IA64 specific
+ result = acpi_table_parse_srat(ACPI_SRAT_TYPE_MEMORY_AFFINITY, acpi_parse_memory_affinity, NR_NODE_MEMBLKS); // IA64 specific
}
/* SLIT: System Locality Information Table */
- result = acpi_table_parse(ACPI_SLIT, acpi_parse_slit);
+ result = acpi_table_parse(ACPI_SIG_SLIT, acpi_parse_slit);
acpi_numa_arch_fixup();
return 0;
#include <linux/delay.h>
#include <linux/workqueue.h>
#include <linux/nmi.h>
+#include <linux/acpi.h>
#include <acpi/acpi.h>
#include <asm/io.h>
#include <acpi/acpi_bus.h>
static void *acpi_irq_context;
static struct workqueue_struct *kacpid_wq;
+static void __init acpi_request_region (struct acpi_generic_address *addr,
+ unsigned int length, char *desc)
+{
+ struct resource *res;
+
+ if (!addr->address || !length)
+ return;
+
+ if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_IO)
+ res = request_region(addr->address, length, desc);
+ else if (addr->space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ res = request_mem_region(addr->address, length, desc);
+}
+
+static int __init acpi_reserve_resources(void)
+{
+ acpi_request_region(&acpi_gbl_FADT.xpm1a_event_block, acpi_gbl_FADT.pm1_event_length,
+ "ACPI PM1a_EVT_BLK");
+
+ acpi_request_region(&acpi_gbl_FADT.xpm1b_event_block, acpi_gbl_FADT.pm1_event_length,
+ "ACPI PM1b_EVT_BLK");
+
+ acpi_request_region(&acpi_gbl_FADT.xpm1a_control_block, acpi_gbl_FADT.pm1_control_length,
+ "ACPI PM1a_CNT_BLK");
+
+ acpi_request_region(&acpi_gbl_FADT.xpm1b_control_block, acpi_gbl_FADT.pm1_control_length,
+ "ACPI PM1b_CNT_BLK");
+
+ if (acpi_gbl_FADT.pm_timer_length == 4)
+ acpi_request_region(&acpi_gbl_FADT.xpm_timer_block, 4, "ACPI PM_TMR");
+
+ acpi_request_region(&acpi_gbl_FADT.xpm2_control_block, acpi_gbl_FADT.pm2_control_length,
+ "ACPI PM2_CNT_BLK");
+
+ /* Length of GPE blocks must be a non-negative multiple of 2 */
+
+ if (!(acpi_gbl_FADT.gpe0_block_length & 0x1))
+ acpi_request_region(&acpi_gbl_FADT.xgpe0_block,
+ acpi_gbl_FADT.gpe0_block_length, "ACPI GPE0_BLK");
+
+ if (!(acpi_gbl_FADT.gpe1_block_length & 0x1))
+ acpi_request_region(&acpi_gbl_FADT.xgpe1_block,
+ acpi_gbl_FADT.gpe1_block_length, "ACPI GPE1_BLK");
+
+ return 0;
+}
+device_initcall(acpi_reserve_resources);
+
acpi_status acpi_os_initialize(void)
{
return AE_OK;
#endif
}
-acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *addr)
+acpi_physical_address __init acpi_os_get_root_pointer(void)
{
if (efi_enabled) {
- addr->pointer_type = ACPI_PHYSICAL_POINTER;
if (efi.acpi20 != EFI_INVALID_TABLE_ADDR)
- addr->pointer.physical = efi.acpi20;
+ return efi.acpi20;
else if (efi.acpi != EFI_INVALID_TABLE_ADDR)
- addr->pointer.physical = efi.acpi;
+ return efi.acpi;
else {
printk(KERN_ERR PREFIX
"System description tables not found\n");
- return AE_NOT_FOUND;
+ return 0;
}
- } else {
- if (ACPI_FAILURE(acpi_find_root_pointer(flags, addr))) {
- printk(KERN_ERR PREFIX
- "System description tables not found\n");
- return AE_NOT_FOUND;
- }
- }
-
- return AE_OK;
+ } else
+ return acpi_find_rsdp();
}
-acpi_status
-acpi_os_map_memory(acpi_physical_address phys, acpi_size size,
- void __iomem ** virt)
+void __iomem *acpi_os_map_memory(acpi_physical_address phys, acpi_size size)
{
if (phys > ULONG_MAX) {
printk(KERN_ERR PREFIX "Cannot map memory that high\n");
- return AE_BAD_PARAMETER;
+ return 0;
}
- /*
- * ioremap checks to ensure this is in reserved space
- */
- *virt = ioremap((unsigned long)phys, size);
-
- if (!*virt)
- return AE_NO_MEMORY;
-
- return AE_OK;
+ if (acpi_gbl_permanent_mmap)
+ /*
+ * ioremap checks to ensure this is in reserved space
+ */
+ return ioremap((unsigned long)phys, size);
+ else
+ return __acpi_map_table((unsigned long)phys, size);
}
EXPORT_SYMBOL_GPL(acpi_os_map_memory);
void acpi_os_unmap_memory(void __iomem * virt, acpi_size size)
{
- iounmap(virt);
+ if (acpi_gbl_permanent_mmap) {
+ iounmap(virt);
+ }
}
EXPORT_SYMBOL_GPL(acpi_os_unmap_memory);
* FADT. It may not be the same if an interrupt source override exists
* for the SCI.
*/
- gsi = acpi_fadt.sci_int;
+ gsi = acpi_gbl_FADT.sci_interrupt;
if (acpi_gsi_to_irq(gsi, &irq) < 0) {
printk(KERN_ERR PREFIX "SCI (ACPI GSI %d) not registered\n",
gsi);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*/
/*
- * Parse the AML and build an operation tree as most interpreters,
- * like Perl, do. Parsing is done by hand rather than with a YACC
- * generated parser to tightly constrain stack and dynamic memory
- * usage. At the same time, parsing is kept flexible and the code
- * fairly compact by parsing based on a list of AML opcode
- * templates in aml_op_info[]
+ * Parse the AML and build an operation tree as most interpreters, (such as
+ * Perl) do. Parsing is done by hand rather than with a YACC generated parser
+ * to tightly constrain stack and dynamic memory usage. Parsing is kept
+ * flexible and the code fairly compact by parsing based on a list of AML
+ * opcode templates in aml_op_info[].
*/
#include <acpi/acpi.h>
static u32 acpi_gbl_depth = 0;
+/* Local prototypes */
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state);
+
+static acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start,
+ union acpi_parse_object *unnamed_op,
+ union acpi_parse_object **op);
+
+static acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start, union acpi_parse_object **new_op);
+
+static acpi_status
+acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start, union acpi_parse_object *op);
+
+static acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **op, acpi_status status);
+
+static acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, acpi_status status);
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_aml_opcode
+ *
+ * PARAMETERS: walk_state - Current state
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Extract the next AML opcode from the input stream.
+ *
+ ******************************************************************************/
+
+static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
+{
+
+ ACPI_FUNCTION_TRACE_PTR(ps_get_aml_opcode, walk_state);
+
+ walk_state->aml_offset =
+ (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
+ walk_state->parser_state.aml_start);
+ walk_state->opcode = acpi_ps_peek_opcode(&(walk_state->parser_state));
+
+ /*
+ * First cut to determine what we have found:
+ * 1) A valid AML opcode
+ * 2) A name string
+ * 3) An unknown/invalid opcode
+ */
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+
+ switch (walk_state->op_info->class) {
+ case AML_CLASS_ASCII:
+ case AML_CLASS_PREFIX:
+ /*
+ * Starts with a valid prefix or ASCII char, this is a name
+ * string. Convert the bare name string to a namepath.
+ */
+ walk_state->opcode = AML_INT_NAMEPATH_OP;
+ walk_state->arg_types = ARGP_NAMESTRING;
+ break;
+
+ case AML_CLASS_UNKNOWN:
+
+ /* The opcode is unrecognized. Just skip unknown opcodes */
+
+ ACPI_ERROR((AE_INFO,
+ "Found unknown opcode %X at AML address %p offset %X, ignoring",
+ walk_state->opcode, walk_state->parser_state.aml,
+ walk_state->aml_offset));
+
+ ACPI_DUMP_BUFFER(walk_state->parser_state.aml, 128);
+
+ /* Assume one-byte bad opcode */
+
+ walk_state->parser_state.aml++;
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+
+ default:
+
+ /* Found opcode info, this is a normal opcode */
+
+ walk_state->parser_state.aml +=
+ acpi_ps_get_opcode_size(walk_state->opcode);
+ walk_state->arg_types = walk_state->op_info->parse_args;
+ break;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_build_named_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Begin of named Op in AML
+ * unnamed_op - Early Op (not a named Op)
+ * Op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Parse a named Op
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_build_named_op(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start,
+ union acpi_parse_object *unnamed_op,
+ union acpi_parse_object **op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *arg = NULL;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_build_named_op, walk_state);
+
+ unnamed_op->common.value.arg = NULL;
+ unnamed_op->common.aml_opcode = walk_state->opcode;
+
+ /*
+ * Get and append arguments until we find the node that contains
+ * the name (the type ARGP_NAME).
+ */
+ while (GET_CURRENT_ARG_TYPE(walk_state->arg_types) &&
+ (GET_CURRENT_ARG_TYPE(walk_state->arg_types) != ARGP_NAME)) {
+ status =
+ acpi_ps_get_next_arg(walk_state,
+ &(walk_state->parser_state),
+ GET_CURRENT_ARG_TYPE(walk_state->
+ arg_types), &arg);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(unnamed_op, arg);
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+ }
+
+ /*
+ * Make sure that we found a NAME and didn't run out of arguments
+ */
+ if (!GET_CURRENT_ARG_TYPE(walk_state->arg_types)) {
+ return_ACPI_STATUS(AE_AML_NO_OPERAND);
+ }
+
+ /* We know that this arg is a name, move to next arg */
+
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = NULL;
+
+ status = walk_state->descending_callback(walk_state, op);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status, "During name lookup/catalog"));
+ return_ACPI_STATUS(status);
+ }
+
+ if (!*op) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_CTRL_PENDING) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_PENDING);
+ }
+ return_ACPI_STATUS(status);
+ }
+
+ acpi_ps_append_arg(*op, unnamed_op->common.value.arg);
+ acpi_gbl_depth++;
+
+ if ((*op)->common.aml_opcode == AML_REGION_OP) {
+ /*
+ * Defer final parsing of an operation_region body, because we don't
+ * have enough info in the first pass to parse it correctly (i.e.,
+ * there may be method calls within the term_arg elements of the body.)
+ *
+ * However, we must continue parsing because the opregion is not a
+ * standalone package -- we don't know where the end is at this point.
+ *
+ * (Length is unknown until parse of the body complete)
+ */
+ (*op)->named.data = aml_op_start;
+ (*op)->named.length = 0;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_create_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Op start in AML
+ * new_op - Returned Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Get Op from AML
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_create_op(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start, union acpi_parse_object **new_op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *op;
+ union acpi_parse_object *named_op = NULL;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_create_op, walk_state);
+
+ status = acpi_ps_get_aml_opcode(walk_state);
+ if (status == AE_CTRL_PARSE_CONTINUE) {
+ return_ACPI_STATUS(AE_CTRL_PARSE_CONTINUE);
+ }
+
+ /* Create Op structure and append to parent's argument list */
+
+ walk_state->op_info = acpi_ps_get_opcode_info(walk_state->opcode);
+ op = acpi_ps_alloc_op(walk_state->opcode);
+ if (!op) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ if (walk_state->op_info->flags & AML_NAMED) {
+ status =
+ acpi_ps_build_named_op(walk_state, aml_op_start, op,
+ &named_op);
+ acpi_ps_free_op(op);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ *new_op = named_op;
+ return_ACPI_STATUS(AE_OK);
+ }
+
+ /* Not a named opcode, just allocate Op and append to parent */
+
+ if (walk_state->op_info->flags & AML_CREATE) {
+ /*
+ * Backup to beginning of create_xXXfield declaration
+ * body_length is unknown until we parse the body
+ */
+ op->named.data = aml_op_start;
+ op->named.length = 0;
+ }
+
+ acpi_ps_append_arg(acpi_ps_get_parent_scope
+ (&(walk_state->parser_state)), op);
+
+ if (walk_state->descending_callback != NULL) {
+ /*
+ * Find the object. This will either insert the object into
+ * the namespace or simply look it up
+ */
+ walk_state->op = *new_op = op;
+
+ status = walk_state->descending_callback(walk_state, &op);
+ status = acpi_ps_next_parse_state(walk_state, op, status);
+ if (status == AE_CTRL_PENDING) {
+ status = AE_CTRL_PARSE_PENDING;
+ }
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_get_arguments
+ *
+ * PARAMETERS: walk_state - Current state
+ * aml_op_start - Op start in AML
+ * Op - Current Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Get arguments for passed Op.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_get_arguments(struct acpi_walk_state *walk_state,
+ u8 * aml_op_start, union acpi_parse_object *op)
+{
+ acpi_status status = AE_OK;
+ union acpi_parse_object *arg = NULL;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_get_arguments, walk_state);
+
+ switch (op->common.aml_opcode) {
+ case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
+ case AML_WORD_OP: /* AML_WORDDATA_ARG */
+ case AML_DWORD_OP: /* AML_DWORDATA_ARG */
+ case AML_QWORD_OP: /* AML_QWORDATA_ARG */
+ case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
+
+ /* Fill in constant or string argument directly */
+
+ acpi_ps_get_next_simple_arg(&(walk_state->parser_state),
+ GET_CURRENT_ARG_TYPE(walk_state->
+ arg_types),
+ op);
+ break;
+
+ case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
+
+ status =
+ acpi_ps_get_next_namepath(walk_state,
+ &(walk_state->parser_state), op,
+ 1);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ walk_state->arg_types = 0;
+ break;
+
+ default:
+ /*
+ * Op is not a constant or string, append each argument to the Op
+ */
+ while (GET_CURRENT_ARG_TYPE(walk_state->arg_types)
+ && !walk_state->arg_count) {
+ walk_state->aml_offset =
+ (u32) ACPI_PTR_DIFF(walk_state->parser_state.aml,
+ walk_state->parser_state.
+ aml_start);
+
+ status =
+ acpi_ps_get_next_arg(walk_state,
+ &(walk_state->parser_state),
+ GET_CURRENT_ARG_TYPE
+ (walk_state->arg_types), &arg);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ if (arg) {
+ arg->common.aml_offset = walk_state->aml_offset;
+ acpi_ps_append_arg(op, arg);
+ }
+
+ INCREMENT_ARG_LIST(walk_state->arg_types);
+ }
+
+ /* Special processing for certain opcodes */
+
+ /* TBD (remove): Temporary mechanism to disable this code if needed */
+
+#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
+
+ if ((walk_state->pass_number <= ACPI_IMODE_LOAD_PASS1) &&
+ ((walk_state->parse_flags & ACPI_PARSE_DISASSEMBLE) == 0)) {
+ /*
+ * We want to skip If/Else/While constructs during Pass1 because we
+ * want to actually conditionally execute the code during Pass2.
+ *
+ * Except for disassembly, where we always want to walk the
+ * If/Else/While packages
+ */
+ switch (op->common.aml_opcode) {
+ case AML_IF_OP:
+ case AML_ELSE_OP:
+ case AML_WHILE_OP:
+
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
+ "Pass1: Skipping an If/Else/While body\n"));
+
+ /* Skip body of if/else/while in pass 1 */
+
+ walk_state->parser_state.aml =
+ walk_state->parser_state.pkg_end;
+ walk_state->arg_count = 0;
+ break;
+
+ default:
+ break;
+ }
+ }
+#endif
+
+ switch (op->common.aml_opcode) {
+ case AML_METHOD_OP:
+ /*
+ * Skip parsing of control method because we don't have enough
+ * info in the first pass to parse it correctly.
+ *
+ * Save the length and address of the body
+ */
+ op->named.data = walk_state->parser_state.aml;
+ op->named.length = (u32)
+ (walk_state->parser_state.pkg_end -
+ walk_state->parser_state.aml);
+
+ /* Skip body of method */
+
+ walk_state->parser_state.aml =
+ walk_state->parser_state.pkg_end;
+ walk_state->arg_count = 0;
+ break;
+
+ case AML_BUFFER_OP:
+ case AML_PACKAGE_OP:
+ case AML_VAR_PACKAGE_OP:
+
+ if ((op->common.parent) &&
+ (op->common.parent->common.aml_opcode ==
+ AML_NAME_OP)
+ && (walk_state->pass_number <=
+ ACPI_IMODE_LOAD_PASS2)) {
+ /*
+ * Skip parsing of Buffers and Packages because we don't have
+ * enough info in the first pass to parse them correctly.
+ */
+ op->named.data = aml_op_start;
+ op->named.length = (u32)
+ (walk_state->parser_state.pkg_end -
+ aml_op_start);
+
+ /* Skip body */
+
+ walk_state->parser_state.aml =
+ walk_state->parser_state.pkg_end;
+ walk_state->arg_count = 0;
+ }
+ break;
+
+ case AML_WHILE_OP:
+
+ if (walk_state->control_state) {
+ walk_state->control_state->control.package_end =
+ walk_state->parser_state.pkg_end;
+ }
+ break;
+
+ default:
+
+ /* No action for all other opcodes */
+ break;
+ }
+
+ break;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * Op - Returned Op
+ * Status - Parse status before complete Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete Op
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_complete_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object **op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_op, walk_state);
+
+ /*
+ * Finished one argument of the containing scope
+ */
+ walk_state->parser_state.scope->parse_scope.arg_count--;
+
+ /* Close this Op (will result in parse subtree deletion) */
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ *op = NULL;
+
+ switch (status) {
+ case AE_OK:
+ break;
+
+ case AE_CTRL_TRANSFER:
+
+ /* We are about to transfer to a called method */
+
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+ return_ACPI_STATUS(status);
+
+ case AE_CTRL_END:
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ if (*op) {
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_BREAK:
+ case AE_CTRL_CONTINUE:
+
+ /* Pop off scopes until we find the While */
+
+ while (!(*op) || ((*op)->common.aml_opcode != AML_WHILE_OP)) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ if ((*op)->common.aml_opcode != AML_WHILE_OP) {
+ status2 = acpi_ds_result_stack_pop(walk_state);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+ }
+
+ /* Close this iteration of the While loop */
+
+ walk_state->op = *op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info((*op)->common.aml_opcode);
+ walk_state->opcode = (*op)->common.aml_opcode;
+
+ status = walk_state->ascending_callback(walk_state);
+ status = acpi_ps_next_parse_state(walk_state, *op, status);
+
+ status2 = acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ status = AE_OK;
+ break;
+
+ case AE_CTRL_TERMINATE:
+
+ /* Clean up */
+ do {
+ if (*op) {
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ status2 = acpi_ds_result_stack_pop(walk_state);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+
+ acpi_ut_delete_generic_state
+ (acpi_ut_pop_generic_state
+ (&walk_state->control_state));
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+ return_ACPI_STATUS(AE_OK);
+
+ default: /* All other non-AE_OK status */
+
+ do {
+ if (*op) {
+ status2 =
+ acpi_ps_complete_this_op(walk_state, *op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (*op);
+
+#if 0
+ /*
+ * TBD: Cleanup parse ops on error
+ */
+ if (*op == NULL) {
+ acpi_ps_pop_scope(parser_state, op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ }
+#endif
+ walk_state->prev_op = NULL;
+ walk_state->prev_arg_types = walk_state->arg_types;
+ return_ACPI_STATUS(status);
+ }
+
+ /* This scope complete? */
+
+ if (acpi_ps_has_completed_scope(&(walk_state->parser_state))) {
+ acpi_ps_pop_scope(&(walk_state->parser_state), op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "Popped scope, Op=%p\n", *op));
+ } else {
+ *op = NULL;
+ }
+
+ return_ACPI_STATUS(AE_OK);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ps_complete_final_op
+ *
+ * PARAMETERS: walk_state - Current state
+ * Op - Current Op
+ * Status - Current parse status before complete last
+ * Op
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Complete last Op.
+ *
+ ******************************************************************************/
+
+static acpi_status
+acpi_ps_complete_final_op(struct acpi_walk_state *walk_state,
+ union acpi_parse_object *op, acpi_status status)
+{
+ acpi_status status2;
+
+ ACPI_FUNCTION_TRACE_PTR(ps_complete_final_op, walk_state);
+
+ /*
+ * Complete the last Op (if not completed), and clear the scope stack.
+ * It is easily possible to end an AML "package" with an unbounded number
+ * of open scopes (such as when several ASL blocks are closed with
+ * sequential closing braces). We want to terminate each one cleanly.
+ */
+ ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
+ op));
+ do {
+ if (op) {
+ if (walk_state->ascending_callback != NULL) {
+ walk_state->op = op;
+ walk_state->op_info =
+ acpi_ps_get_opcode_info(op->common.
+ aml_opcode);
+ walk_state->opcode = op->common.aml_opcode;
+
+ status =
+ walk_state->ascending_callback(walk_state);
+ status =
+ acpi_ps_next_parse_state(walk_state, op,
+ status);
+ if (status == AE_CTRL_PENDING) {
+ status =
+ acpi_ps_complete_op(walk_state, &op,
+ AE_OK);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ if (status == AE_CTRL_TERMINATE) {
+ status = AE_OK;
+
+ /* Clean up */
+ do {
+ if (op) {
+ status2 =
+ acpi_ps_complete_this_op
+ (walk_state, op);
+ if (ACPI_FAILURE
+ (status2)) {
+ return_ACPI_STATUS
+ (status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&
+ (walk_state->
+ parser_state),
+ &op,
+ &walk_state->
+ arg_types,
+ &walk_state->
+ arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+ }
+
+ else if (ACPI_FAILURE(status)) {
+
+ /* First error is most important */
+
+ (void)
+ acpi_ps_complete_this_op(walk_state,
+ op);
+ return_ACPI_STATUS(status);
+ }
+ }
+
+ status2 = acpi_ps_complete_this_op(walk_state, op);
+ if (ACPI_FAILURE(status2)) {
+ return_ACPI_STATUS(status2);
+ }
+ }
+
+ acpi_ps_pop_scope(&(walk_state->parser_state), &op,
+ &walk_state->arg_types,
+ &walk_state->arg_count);
+
+ } while (op);
+
+ return_ACPI_STATUS(status);
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ps_parse_loop
acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
{
acpi_status status = AE_OK;
- acpi_status status2;
union acpi_parse_object *op = NULL; /* current op */
- union acpi_parse_object *arg = NULL;
- union acpi_parse_object *pre_op = NULL;
struct acpi_parse_state *parser_state;
u8 *aml_op_start = NULL;
"Invoked method did not return a value"));
}
+
ACPI_EXCEPTION((AE_INFO, status,
"GetPredicate Failed"));
return_ACPI_STATUS(status);
/* We were in the middle of an op */
- op = walk_state->prev_op;
- walk_state->arg_types = walk_state->prev_arg_types;
- }
- }
-#endif
-
- /* Iterative parsing loop, while there is more AML to process: */
-
- while ((parser_state->aml < parser_state->aml_end) || (op)) {
- aml_op_start = parser_state->aml;
- if (!op) {
-
- /* Get the next opcode from the AML stream */
-
- walk_state->aml_offset =
- (u32) ACPI_PTR_DIFF(parser_state->aml,
- parser_state->aml_start);
- walk_state->opcode = acpi_ps_peek_opcode(parser_state);
-
- /*
- * First cut to determine what we have found:
- * 1) A valid AML opcode
- * 2) A name string
- * 3) An unknown/invalid opcode
- */
- walk_state->op_info =
- acpi_ps_get_opcode_info(walk_state->opcode);
- switch (walk_state->op_info->class) {
- case AML_CLASS_ASCII:
- case AML_CLASS_PREFIX:
- /*
- * Starts with a valid prefix or ASCII char, this is a name
- * string. Convert the bare name string to a namepath.
- */
- walk_state->opcode = AML_INT_NAMEPATH_OP;
- walk_state->arg_types = ARGP_NAMESTRING;
- break;
-
- case AML_CLASS_UNKNOWN:
-
- /* The opcode is unrecognized. Just skip unknown opcodes */
-
- ACPI_ERROR((AE_INFO,
- "Found unknown opcode %X at AML address %p offset %X, ignoring",
- walk_state->opcode,
- parser_state->aml,
- walk_state->aml_offset));
-
- ACPI_DUMP_BUFFER(parser_state->aml, 128);
-
- /* Assume one-byte bad opcode */
-
- parser_state->aml++;
- continue;
-
- default:
-
- /* Found opcode info, this is a normal opcode */
-
- parser_state->aml +=
- acpi_ps_get_opcode_size(walk_state->opcode);
- walk_state->arg_types =
- walk_state->op_info->parse_args;
- break;
- }
-
- /* Create Op structure and append to parent's argument list */
-
- if (walk_state->op_info->flags & AML_NAMED) {
-
- /* Allocate a new pre_op if necessary */
-
- if (!pre_op) {
- pre_op =
- acpi_ps_alloc_op(walk_state->
- opcode);
- if (!pre_op) {
- status = AE_NO_MEMORY;
- goto close_this_op;
- }
- }
-
- pre_op->common.value.arg = NULL;
- pre_op->common.aml_opcode = walk_state->opcode;
-
- /*
- * Get and append arguments until we find the node that contains
- * the name (the type ARGP_NAME).
- */
- while (GET_CURRENT_ARG_TYPE
- (walk_state->arg_types)
- &&
- (GET_CURRENT_ARG_TYPE
- (walk_state->arg_types) != ARGP_NAME)) {
- status =
- acpi_ps_get_next_arg(walk_state,
- parser_state,
- GET_CURRENT_ARG_TYPE
- (walk_state->
- arg_types),
- &arg);
- if (ACPI_FAILURE(status)) {
- goto close_this_op;
- }
-
- acpi_ps_append_arg(pre_op, arg);
- INCREMENT_ARG_LIST(walk_state->
- arg_types);
- }
-
- /*
- * Make sure that we found a NAME and didn't run out of
- * arguments
- */
- if (!GET_CURRENT_ARG_TYPE
- (walk_state->arg_types)) {
- status = AE_AML_NO_OPERAND;
- goto close_this_op;
- }
-
- /* We know that this arg is a name, move to next arg */
-
- INCREMENT_ARG_LIST(walk_state->arg_types);
-
- /*
- * Find the object. This will either insert the object into
- * the namespace or simply look it up
- */
- walk_state->op = NULL;
+ op = walk_state->prev_op;
+ walk_state->arg_types = walk_state->prev_arg_types;
+ }
+ }
+#endif
- status =
- walk_state->descending_callback(walk_state,
- &op);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "During name lookup/catalog"));
- goto close_this_op;
- }
+ /* Iterative parsing loop, while there is more AML to process: */
- if (!op) {
+ while ((parser_state->aml < parser_state->aml_end) || (op)) {
+ aml_op_start = parser_state->aml;
+ if (!op) {
+ status =
+ acpi_ps_create_op(walk_state, aml_op_start, &op);
+ if (ACPI_FAILURE(status)) {
+ if (status == AE_CTRL_PARSE_CONTINUE) {
continue;
}
- status =
- acpi_ps_next_parse_state(walk_state, op,
- status);
- if (status == AE_CTRL_PENDING) {
+ if (status == AE_CTRL_PARSE_PENDING) {
status = AE_OK;
- goto close_this_op;
}
+ status =
+ acpi_ps_complete_op(walk_state, &op,
+ status);
if (ACPI_FAILURE(status)) {
- goto close_this_op;
- }
-
- acpi_ps_append_arg(op,
- pre_op->common.value.arg);
- acpi_gbl_depth++;
-
- if (op->common.aml_opcode == AML_REGION_OP) {
- /*
- * Defer final parsing of an operation_region body,
- * because we don't have enough info in the first pass
- * to parse it correctly (i.e., there may be method
- * calls within the term_arg elements of the body.)
- *
- * However, we must continue parsing because
- * the opregion is not a standalone package --
- * we don't know where the end is at this point.
- *
- * (Length is unknown until parse of the body complete)
- */
- op->named.data = aml_op_start;
- op->named.length = 0;
- }
- } else {
- /* Not a named opcode, just allocate Op and append to parent */
-
- walk_state->op_info =
- acpi_ps_get_opcode_info(walk_state->opcode);
- op = acpi_ps_alloc_op(walk_state->opcode);
- if (!op) {
- status = AE_NO_MEMORY;
- goto close_this_op;
- }
-
- if (walk_state->op_info->flags & AML_CREATE) {
- /*
- * Backup to beginning of create_xXXfield declaration
- * body_length is unknown until we parse the body
- */
- op->named.data = aml_op_start;
- op->named.length = 0;
+ return_ACPI_STATUS(status);
}
- acpi_ps_append_arg(acpi_ps_get_parent_scope
- (parser_state), op);
-
- if ((walk_state->descending_callback != NULL)) {
- /*
- * Find the object. This will either insert the object into
- * the namespace or simply look it up
- */
- walk_state->op = op;
-
- status =
- walk_state->
- descending_callback(walk_state,
- &op);
- status =
- acpi_ps_next_parse_state(walk_state,
- op,
- status);
- if (status == AE_CTRL_PENDING) {
- status = AE_OK;
- goto close_this_op;
- }
-
- if (ACPI_FAILURE(status)) {
- goto close_this_op;
- }
- }
+ continue;
}
op->common.aml_offset = walk_state->aml_offset;
/* Get arguments */
- switch (op->common.aml_opcode) {
- case AML_BYTE_OP: /* AML_BYTEDATA_ARG */
- case AML_WORD_OP: /* AML_WORDDATA_ARG */
- case AML_DWORD_OP: /* AML_DWORDATA_ARG */
- case AML_QWORD_OP: /* AML_QWORDATA_ARG */
- case AML_STRING_OP: /* AML_ASCIICHARLIST_ARG */
-
- /* Fill in constant or string argument directly */
-
- acpi_ps_get_next_simple_arg(parser_state,
- GET_CURRENT_ARG_TYPE
- (walk_state->
- arg_types), op);
- break;
-
- case AML_INT_NAMEPATH_OP: /* AML_NAMESTRING_ARG */
-
+ status =
+ acpi_ps_get_arguments(walk_state, aml_op_start, op);
+ if (ACPI_FAILURE(status)) {
status =
- acpi_ps_get_next_namepath(walk_state,
- parser_state, op,
- 1);
+ acpi_ps_complete_op(walk_state, &op,
+ status);
if (ACPI_FAILURE(status)) {
- goto close_this_op;
- }
-
- walk_state->arg_types = 0;
- break;
-
- default:
- /*
- * Op is not a constant or string, append each argument
- * to the Op
- */
- while (GET_CURRENT_ARG_TYPE
- (walk_state->arg_types)
- && !walk_state->arg_count) {
- walk_state->aml_offset = (u32)
- ACPI_PTR_DIFF(parser_state->aml,
- parser_state->
- aml_start);
-
- status =
- acpi_ps_get_next_arg(walk_state,
- parser_state,
- GET_CURRENT_ARG_TYPE
- (walk_state->
- arg_types),
- &arg);
- if (ACPI_FAILURE(status)) {
- goto close_this_op;
- }
-
- if (arg) {
- arg->common.aml_offset =
- walk_state->aml_offset;
- acpi_ps_append_arg(op, arg);
- }
- INCREMENT_ARG_LIST(walk_state->
- arg_types);
- }
-
- /* Special processing for certain opcodes */
-
- /* TBD (remove): Temporary mechanism to disable this code if needed */
-
-#ifdef ACPI_ENABLE_MODULE_LEVEL_CODE
-
- if ((walk_state->pass_number <=
- ACPI_IMODE_LOAD_PASS1)
- &&
- ((walk_state->
- parse_flags & ACPI_PARSE_DISASSEMBLE) ==
- 0)) {
- /*
- * We want to skip If/Else/While constructs during Pass1
- * because we want to actually conditionally execute the
- * code during Pass2.
- *
- * Except for disassembly, where we always want to
- * walk the If/Else/While packages
- */
- switch (op->common.aml_opcode) {
- case AML_IF_OP:
- case AML_ELSE_OP:
- case AML_WHILE_OP:
-
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "Pass1: Skipping an If/Else/While body\n"));
-
- /* Skip body of if/else/while in pass 1 */
-
- parser_state->aml =
- parser_state->pkg_end;
- walk_state->arg_count = 0;
- break;
-
- default:
- break;
- }
+ return_ACPI_STATUS(status);
}
-#endif
- switch (op->common.aml_opcode) {
- case AML_METHOD_OP:
-
- /*
- * Skip parsing of control method
- * because we don't have enough info in the first pass
- * to parse it correctly.
- *
- * Save the length and address of the body
- */
- op->named.data = parser_state->aml;
- op->named.length =
- (u32) (parser_state->pkg_end -
- parser_state->aml);
-
- /* Skip body of method */
-
- parser_state->aml =
- parser_state->pkg_end;
- walk_state->arg_count = 0;
- break;
-
- case AML_BUFFER_OP:
- case AML_PACKAGE_OP:
- case AML_VAR_PACKAGE_OP:
-
- if ((op->common.parent) &&
- (op->common.parent->common.
- aml_opcode == AML_NAME_OP)
- && (walk_state->pass_number <=
- ACPI_IMODE_LOAD_PASS2)) {
- /*
- * Skip parsing of Buffers and Packages
- * because we don't have enough info in the first pass
- * to parse them correctly.
- */
- op->named.data = aml_op_start;
- op->named.length =
- (u32) (parser_state->
- pkg_end -
- aml_op_start);
-
- /* Skip body */
-
- parser_state->aml =
- parser_state->pkg_end;
- walk_state->arg_count = 0;
- }
- break;
-
- case AML_WHILE_OP:
- if (walk_state->control_state) {
- walk_state->control_state->
- control.package_end =
- parser_state->pkg_end;
- }
- break;
-
- default:
-
- /* No action for all other opcodes */
- break;
- }
- break;
+ continue;
}
}
walk_state->arg_types,
walk_state->arg_count);
if (ACPI_FAILURE(status)) {
- goto close_this_op;
+ status =
+ acpi_ps_complete_op(walk_state, &op,
+ status);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ continue;
}
+
op = NULL;
continue;
}
acpi_ps_next_parse_state(walk_state, op, status);
if (status == AE_CTRL_PENDING) {
status = AE_OK;
- goto close_this_op;
}
}
- close_this_op:
- /*
- * Finished one argument of the containing scope
- */
- parser_state->scope->parse_scope.arg_count--;
-
- /* Finished with pre_op */
-
- if (pre_op) {
- acpi_ps_free_op(pre_op);
- pre_op = NULL;
- }
-
- /* Close this Op (will result in parse subtree deletion) */
-
- status2 = acpi_ps_complete_this_op(walk_state, op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- op = NULL;
-
- switch (status) {
- case AE_OK:
- break;
-
- case AE_CTRL_TRANSFER:
-
- /* We are about to transfer to a called method. */
-
- walk_state->prev_op = op;
- walk_state->prev_arg_types = walk_state->arg_types;
- return_ACPI_STATUS(status);
-
- case AE_CTRL_END:
-
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- if (op) {
- walk_state->op = op;
- walk_state->op_info =
- acpi_ps_get_opcode_info(op->common.
- aml_opcode);
- walk_state->opcode = op->common.aml_opcode;
-
- status =
- walk_state->ascending_callback(walk_state);
- status =
- acpi_ps_next_parse_state(walk_state, op,
- status);
-
- status2 =
- acpi_ps_complete_this_op(walk_state, op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- op = NULL;
- }
- status = AE_OK;
- break;
-
- case AE_CTRL_BREAK:
- case AE_CTRL_CONTINUE:
-
- /* Pop off scopes until we find the While */
-
- while (!op || (op->common.aml_opcode != AML_WHILE_OP)) {
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- if (op->common.aml_opcode != AML_WHILE_OP) {
- status2 =
- acpi_ds_result_stack_pop
- (walk_state);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
- }
-
- /* Close this iteration of the While loop */
-
- walk_state->op = op;
- walk_state->op_info =
- acpi_ps_get_opcode_info(op->common.aml_opcode);
- walk_state->opcode = op->common.aml_opcode;
-
- status = walk_state->ascending_callback(walk_state);
- status =
- acpi_ps_next_parse_state(walk_state, op, status);
-
- status2 = acpi_ps_complete_this_op(walk_state, op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- op = NULL;
-
- status = AE_OK;
- break;
-
- case AE_CTRL_TERMINATE:
-
- status = AE_OK;
-
- /* Clean up */
- do {
- if (op) {
- status2 =
- acpi_ps_complete_this_op(walk_state,
- op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
-
- status2 =
- acpi_ds_result_stack_pop
- (walk_state);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
-
- acpi_ut_delete_generic_state
- (acpi_ut_pop_generic_state
- (&walk_state->control_state));
- }
-
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (op);
-
- return_ACPI_STATUS(status);
-
- default: /* All other non-AE_OK status */
-
- do {
- if (op) {
- status2 =
- acpi_ps_complete_this_op(walk_state,
- op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
-
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (op);
-
- /*
- * TBD: Cleanup parse ops on error
- */
-#if 0
- if (op == NULL) {
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
- }
-#endif
- walk_state->prev_op = op;
- walk_state->prev_arg_types = walk_state->arg_types;
+ status = acpi_ps_complete_op(walk_state, &op, status);
+ if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
- /* This scope complete? */
-
- if (acpi_ps_has_completed_scope(parser_state)) {
- acpi_ps_pop_scope(parser_state, &op,
- &walk_state->arg_types,
- &walk_state->arg_count);
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "Popped scope, Op=%p\n", op));
- } else {
- op = NULL;
- }
-
} /* while parser_state->Aml */
- /*
- * Complete the last Op (if not completed), and clear the scope stack.
- * It is easily possible to end an AML "package" with an unbounded number
- * of open scopes (such as when several ASL blocks are closed with
- * sequential closing braces). We want to terminate each one cleanly.
- */
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE, "AML package complete at Op %p\n",
- op));
- do {
- if (op) {
- if (walk_state->ascending_callback != NULL) {
- walk_state->op = op;
- walk_state->op_info =
- acpi_ps_get_opcode_info(op->common.
- aml_opcode);
- walk_state->opcode = op->common.aml_opcode;
-
- status =
- walk_state->ascending_callback(walk_state);
- status =
- acpi_ps_next_parse_state(walk_state, op,
- status);
- if (status == AE_CTRL_PENDING) {
- status = AE_OK;
- goto close_this_op;
- }
-
- if (status == AE_CTRL_TERMINATE) {
- status = AE_OK;
-
- /* Clean up */
- do {
- if (op) {
- status2 =
- acpi_ps_complete_this_op
- (walk_state, op);
- if (ACPI_FAILURE
- (status2)) {
- return_ACPI_STATUS
- (status2);
- }
- }
-
- acpi_ps_pop_scope(parser_state,
- &op,
- &walk_state->
- arg_types,
- &walk_state->
- arg_count);
-
- } while (op);
-
- return_ACPI_STATUS(status);
- }
-
- else if (ACPI_FAILURE(status)) {
-
- /* First error is most important */
-
- (void)
- acpi_ps_complete_this_op(walk_state,
- op);
- return_ACPI_STATUS(status);
- }
- }
-
- status2 = acpi_ps_complete_this_op(walk_state, op);
- if (ACPI_FAILURE(status2)) {
- return_ACPI_STATUS(status2);
- }
- }
-
- acpi_ps_pop_scope(parser_state, &op, &walk_state->arg_types,
- &walk_state->arg_count);
-
- } while (op);
-
+ status = acpi_ps_complete_final_op(walk_state, op, status);
return_ACPI_STATUS(status);
}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
if ((status == AE_ALREADY_EXISTS) &&
(!walk_state->method_desc->method.mutex)) {
+ ACPI_INFO((AE_INFO,
+ "Marking method %4.4s as Serialized",
+ walk_state->method_node->name.
+ ascii));
+
/*
* Method tried to create an object twice. The probable cause is
* that the method cannot handle reentrancy.
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
static void acpi_ps_stop_trace(struct acpi_evaluate_info *info);
-static acpi_status acpi_ps_execute_pass(struct acpi_evaluate_info *info);
-
static void
acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action);
acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info)
{
acpi_status status;
+ union acpi_parse_object *op;
+ struct acpi_walk_state *walk_state;
ACPI_FUNCTION_TRACE(ps_execute_method);
}
/*
- * The caller "owns" the parameters, so give each one an extra
- * reference
+ * The caller "owns" the parameters, so give each one an extra reference
*/
acpi_ps_update_parameter_list(info, REF_INCREMENT);
acpi_ps_start_trace(info);
/*
- * 1) Perform the first pass parse of the method to enter any
- * named objects that it creates into the namespace
+ * Execute the method. Performs parse simultaneously
*/
ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "**** Begin Method Parse **** Entry=%p obj=%p\n",
- info->resolved_node, info->obj_desc));
+ "**** Begin Method Parse/Execute [%4.4s] **** Node=%p Obj=%p\n",
+ info->resolved_node->name.ascii, info->resolved_node,
+ info->obj_desc));
+
+ /* Create and init a Root Node */
+
+ op = acpi_ps_create_scope_op();
+ if (!op) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
+
+ /* Create and initialize a new walk state */
+
+ info->pass_number = ACPI_IMODE_EXECUTE;
+ walk_state =
+ acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
+ NULL, NULL);
+ if (!walk_state) {
+ status = AE_NO_MEMORY;
+ goto cleanup;
+ }
- info->pass_number = 1;
- status = acpi_ps_execute_pass(info);
+ status = acpi_ds_init_aml_walk(walk_state, op, info->resolved_node,
+ info->obj_desc->method.aml_start,
+ info->obj_desc->method.aml_length, info,
+ info->pass_number);
if (ACPI_FAILURE(status)) {
+ acpi_ds_delete_walk_state(walk_state);
goto cleanup;
}
- /*
- * 2) Execute the method. Performs second pass parse simultaneously
- */
- ACPI_DEBUG_PRINT((ACPI_DB_PARSE,
- "**** Begin Method Execution **** Entry=%p obj=%p\n",
- info->resolved_node, info->obj_desc));
+ /* Parse the AML */
- info->pass_number = 3;
- status = acpi_ps_execute_pass(info);
+ status = acpi_ps_parse_aml(walk_state);
+
+ /* walk_state was deleted by parse_aml */
cleanup:
+ acpi_ps_delete_parse_tree(op);
+
/* End optional tracing */
acpi_ps_stop_trace(info);
}
}
}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_ps_execute_pass
- *
- * PARAMETERS: Info - See struct acpi_evaluate_info
- * (Used: pass_number, Node, and obj_desc)
- *
- * RETURN: Status
- *
- * DESCRIPTION: Single AML pass: Parse or Execute a control method
- *
- ******************************************************************************/
-
-static acpi_status acpi_ps_execute_pass(struct acpi_evaluate_info *info)
-{
- acpi_status status;
- union acpi_parse_object *op;
- struct acpi_walk_state *walk_state;
-
- ACPI_FUNCTION_TRACE(ps_execute_pass);
-
- /* Create and init a Root Node */
-
- op = acpi_ps_create_scope_op();
- if (!op) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Create and initialize a new walk state */
-
- walk_state =
- acpi_ds_create_walk_state(info->obj_desc->method.owner_id, NULL,
- NULL, NULL);
- if (!walk_state) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
-
- status = acpi_ds_init_aml_walk(walk_state, op, info->resolved_node,
- info->obj_desc->method.aml_start,
- info->obj_desc->method.aml_length,
- info->pass_number == 1 ? NULL : info,
- info->pass_number);
- if (ACPI_FAILURE(status)) {
- acpi_ds_delete_walk_state(walk_state);
- goto cleanup;
- }
-
- /* Parse the AML */
-
- status = acpi_ps_parse_aml(walk_state);
-
- /* Walk state was deleted by parse_aml */
-
- cleanup:
- acpi_ps_delete_parse_tree(op);
- return_ACPI_STATUS(status);
-}
}
}
/* Add a penalty for the SCI */
- acpi_irq_penalty[acpi_fadt.sci_int] += PIRQ_PENALTY_PCI_USING;
+ acpi_irq_penalty[acpi_gbl_FADT.sci_interrupt] += PIRQ_PENALTY_PCI_USING;
return 0;
}
/* Make sure SCI is enabled again (Apple firmware bug?) */
- acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1, ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_SCI_ENABLE, 1);
list_for_each(node, &acpi_link.entries) {
link = list_entry(node, struct acpi_pci_link, node);
EXPORT_SYMBOL(acpi_pci_unregister_driver);
+acpi_handle acpi_get_pci_rootbridge_handle(unsigned int seg, unsigned int bus)
+{
+ struct acpi_pci_root *tmp;
+
+ list_for_each_entry(tmp, &acpi_pci_roots, node) {
+ if ((tmp->id.segment == (u16) seg) && (tmp->id.bus == (u16) bus))
+ return tmp->device->handle;
+ }
+ return NULL;
+}
+
+EXPORT_SYMBOL_GPL(acpi_get_pci_rootbridge_handle);
+
static acpi_status
get_root_bridge_busnr_callback(struct acpi_resource *resource, void *data)
{
return AE_OK;
}
+static void acpi_pci_bridge_scan(struct acpi_device *device)
+{
+ int status;
+ struct acpi_device *child = NULL;
+
+ if (device->flags.bus_address)
+ if (device->parent && device->parent->ops.bind) {
+ status = device->parent->ops.bind(device);
+ if (!status) {
+ list_for_each_entry(child, &device->children, node)
+ acpi_pci_bridge_scan(child);
+ }
+ }
+}
+
static int acpi_pci_root_add(struct acpi_device *device)
{
int result = 0;
acpi_status status = AE_OK;
unsigned long value = 0;
acpi_handle handle = NULL;
+ struct acpi_device *child;
if (!device)
strcpy(acpi_device_class(device), ACPI_PCI_ROOT_CLASS);
acpi_driver_data(device) = root;
- /*
- * TBD: Doesn't the bus driver automatically set this?
- */
device->ops.bind = acpi_pci_bind;
/*
result = acpi_pci_irq_add_prt(device->handle, root->id.segment,
root->id.bus);
+ /*
+ * Scan and bind all _ADR-Based Devices
+ */
+ list_for_each_entry(child, &device->children, node)
+ acpi_pci_bridge_scan(child);
+
end:
if (result) {
if (!list_empty(&root->node))
}
/* Use the acpiid in MADT to map cpus in case of SMP */
+
#ifndef CONFIG_SMP
-#define convert_acpiid_to_cpu(acpi_id) (-1)
+static int get_cpu_id(acpi_handle handle, u32 acpi_id) {return -1;}
#else
+static struct acpi_table_madt *madt;
+
+static int map_lapic_id(struct acpi_subtable_header *entry,
+ u32 acpi_id, int *apic_id)
+{
+ struct acpi_madt_local_apic *lapic =
+ (struct acpi_madt_local_apic *)entry;
+ if ((lapic->lapic_flags & ACPI_MADT_ENABLED) &&
+ lapic->processor_id == acpi_id) {
+ *apic_id = lapic->id;
+ return 1;
+ }
+ return 0;
+}
+
+static int map_lsapic_id(struct acpi_subtable_header *entry,
+ u32 acpi_id, int *apic_id)
+{
+ struct acpi_madt_local_sapic *lsapic =
+ (struct acpi_madt_local_sapic *)entry;
+ /* Only check enabled APICs*/
+ if (lsapic->lapic_flags & ACPI_MADT_ENABLED) {
+ /* First check against id */
+ if (lsapic->processor_id == acpi_id) {
+ *apic_id = lsapic->id;
+ return 1;
+ /* Check against optional uid */
+ } else if (entry->length >= 16 &&
+ lsapic->uid == acpi_id) {
+ *apic_id = lsapic->uid;
+ return 1;
+ }
+ }
+ return 0;
+}
+
#ifdef CONFIG_IA64
-#define arch_acpiid_to_apicid ia64_acpiid_to_sapicid
#define arch_cpu_to_apicid ia64_cpu_to_sapicid
-#define ARCH_BAD_APICID (0xffff)
#else
-#define arch_acpiid_to_apicid x86_acpiid_to_apicid
#define arch_cpu_to_apicid x86_cpu_to_apicid
-#define ARCH_BAD_APICID (0xff)
#endif
-static int convert_acpiid_to_cpu(u8 acpi_id)
+static int map_madt_entry(u32 acpi_id)
+{
+ unsigned long madt_end, entry;
+ int apic_id = -1;
+
+ if (!madt)
+ return apic_id;
+
+ entry = (unsigned long)madt;
+ madt_end = entry + madt->header.length;
+
+ /* Parse all entries looking for a match. */
+
+ entry += sizeof(struct acpi_table_madt);
+ while (entry + sizeof(struct acpi_subtable_header) < madt_end) {
+ struct acpi_subtable_header *header =
+ (struct acpi_subtable_header *)entry;
+ if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
+ if (map_lapic_id(header, acpi_id, &apic_id))
+ break;
+ } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
+ if (map_lsapic_id(header, acpi_id, &apic_id))
+ break;
+ }
+ entry += header->length;
+ }
+ return apic_id;
+}
+
+static int map_mat_entry(acpi_handle handle, u32 acpi_id)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ struct acpi_subtable_header *header;
+ int apic_id = -1;
+
+ if (ACPI_FAILURE(acpi_evaluate_object(handle, "_MAT", NULL, &buffer)))
+ goto exit;
+
+ if (!buffer.length || !buffer.pointer)
+ goto exit;
+
+ obj = buffer.pointer;
+ if (obj->type != ACPI_TYPE_BUFFER ||
+ obj->buffer.length < sizeof(struct acpi_subtable_header)) {
+ goto exit;
+ }
+
+ header = (struct acpi_subtable_header *)obj->buffer.pointer;
+ if (header->type == ACPI_MADT_TYPE_LOCAL_APIC) {
+ map_lapic_id(header, acpi_id, &apic_id);
+ } else if (header->type == ACPI_MADT_TYPE_LOCAL_SAPIC) {
+ map_lsapic_id(header, acpi_id, &apic_id);
+ }
+
+exit:
+ if (buffer.pointer)
+ kfree(buffer.pointer);
+ return apic_id;
+}
+
+static int get_cpu_id(acpi_handle handle, u32 acpi_id)
{
- u16 apic_id;
int i;
+ int apic_id = -1;
- apic_id = arch_acpiid_to_apicid[acpi_id];
- if (apic_id == ARCH_BAD_APICID)
- return -1;
+ apic_id = map_mat_entry(handle, acpi_id);
+ if (apic_id == -1)
+ apic_id = map_madt_entry(acpi_id);
+ if (apic_id == -1)
+ return apic_id;
- for (i = 0; i < NR_CPUS; i++) {
+ for (i = 0; i < NR_CPUS; ++i) {
if (arch_cpu_to_apicid[i] == apic_id)
return i;
}
Driver Interface
-------------------------------------------------------------------------- */
-static int acpi_processor_get_info(struct acpi_processor *pr)
+static int acpi_processor_get_info(struct acpi_processor *pr, unsigned has_uid)
{
acpi_status status = 0;
union acpi_object object = { 0 };
* Check to see if we have bus mastering arbitration control. This
* is required for proper C3 usage (to maintain cache coherency).
*/
- if (acpi_fadt.V1_pm2_cnt_blk && acpi_fadt.pm2_cnt_len) {
+ if (acpi_gbl_FADT.pm2_control_block && acpi_gbl_FADT.pm2_control_length) {
pr->flags.bm_control = 1;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Bus mastering arbitration control present\n"));
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"No bus mastering arbitration control\n"));
- /*
- * Evalute the processor object. Note that it is common on SMP to
- * have the first (boot) processor with a valid PBLK address while
- * all others have a NULL address.
- */
- status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
- if (ACPI_FAILURE(status)) {
- printk(KERN_ERR PREFIX "Evaluating processor object\n");
- return -ENODEV;
- }
-
- /*
- * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
- * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c
- */
- pr->acpi_id = object.processor.proc_id;
+ /* Check if it is a Device with HID and UID */
+ if (has_uid) {
+ unsigned long value;
+ status = acpi_evaluate_integer(pr->handle, METHOD_NAME__UID,
+ NULL, &value);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating processor _UID\n");
+ return -ENODEV;
+ }
+ pr->acpi_id = value;
+ } else {
+ /*
+ * Evalute the processor object. Note that it is common on SMP to
+ * have the first (boot) processor with a valid PBLK address while
+ * all others have a NULL address.
+ */
+ status = acpi_evaluate_object(pr->handle, NULL, NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_ERR PREFIX "Evaluating processor object\n");
+ return -ENODEV;
+ }
- cpu_index = convert_acpiid_to_cpu(pr->acpi_id);
+ /*
+ * TBD: Synch processor ID (via LAPIC/LSAPIC structures) on SMP.
+ * >>> 'acpi_get_processor_id(acpi_id, &id)' in arch/xxx/acpi.c
+ */
+ pr->acpi_id = object.processor.proc_id;
+ }
+ cpu_index = get_cpu_id(pr->handle, pr->acpi_id);
/* Handle UP system running SMP kernel, with no LAPIC in MADT */
if (!cpu0_initialized && (cpu_index == -1) &&
* less than the max # of CPUs. They should be ignored _iff
* they are physically not present.
*/
- if (cpu_index == -1) {
+ if (pr->id == -1) {
if (ACPI_FAILURE
(acpi_processor_hotadd_init(pr->handle, &pr->id))) {
return -ENODEV;
object.processor.pblk_length);
else {
pr->throttling.address = object.processor.pblk_address;
- pr->throttling.duty_offset = acpi_fadt.duty_offset;
- pr->throttling.duty_width = acpi_fadt.duty_width;
+ pr->throttling.duty_offset = acpi_gbl_FADT.duty_offset;
+ pr->throttling.duty_width = acpi_gbl_FADT.duty_width;
pr->pblk = object.processor.pblk_address;
pr = acpi_driver_data(device);
- result = acpi_processor_get_info(pr);
+ result = acpi_processor_get_info(pr, device->flags.unique_id);
if (result) {
/* Processor is physically not present */
return 0;
return -ENODEV;
if ((pr->id >= 0) && (pr->id < NR_CPUS)) {
- kobject_uevent(&(*device)->kobj, KOBJ_ONLINE);
+ kobject_uevent(&(*device)->dev.kobj, KOBJ_ONLINE);
}
return 0;
}
}
if (pr->id >= 0 && (pr->id < NR_CPUS)) {
- kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+ kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
break;
}
result = acpi_processor_start(device);
if ((!result) && ((pr->id >= 0) && (pr->id < NR_CPUS))) {
- kobject_uevent(&device->kobj, KOBJ_ONLINE);
+ kobject_uevent(&device->dev.kobj, KOBJ_ONLINE);
} else {
printk(KERN_ERR PREFIX "Device [%s] failed to start\n",
acpi_device_bid(device));
}
if ((pr->id < NR_CPUS) && (cpu_present(pr->id)))
- kobject_uevent(&device->kobj, KOBJ_OFFLINE);
+ kobject_uevent(&device->dev.kobj, KOBJ_OFFLINE);
break;
default:
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
memset(&processors, 0, sizeof(processors));
memset(&errata, 0, sizeof(errata));
+#ifdef CONFIG_SMP
+ if (ACPI_FAILURE(acpi_get_table(ACPI_SIG_MADT, 0,
+ (struct acpi_table_header **)&madt)))
+ madt = 0;
+#endif
+
acpi_processor_dir = proc_mkdir(ACPI_PROCESSOR_CLASS, acpi_root_dir);
if (!acpi_processor_dir)
return -ENOMEM;
{
if (t2 >= t1)
return (t2 - t1);
- else if (!acpi_fadt.tmr_val_ext)
+ else if (!(acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER))
return (((0x00FFFFFF - t1) + t2) & 0x00FFFFFF);
else
return ((0xFFFFFFFF - t1) + t2);
case ACPI_STATE_C3:
/* Disable bus master reload */
if (new->type != ACPI_STATE_C3 && pr->flags.bm_check)
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
break;
}
}
case ACPI_STATE_C3:
/* Enable bus master reload */
if (old->type != ACPI_STATE_C3 && pr->flags.bm_check)
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 1);
break;
}
/* Dummy wait op - must do something useless after P_LVL2 read
because chipsets cannot guarantee that STPCLK# signal
gets asserted in time to freeze execution properly. */
- unused = inl(acpi_fadt.xpm_tmr_blk.address);
+ unused = inl(acpi_gbl_FADT.xpm_timer_block.address);
}
}
pr->power.bm_activity <<= diff;
- acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS,
- &bm_status, ACPI_MTX_DO_NOT_LOCK);
+ acpi_get_register(ACPI_BITREG_BUS_MASTER_STATUS, &bm_status);
if (bm_status) {
pr->power.bm_activity |= 0x1;
- acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS,
- 1, ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_STATUS, 1);
}
/*
* PIIX4 Erratum #18: Note that BM_STS doesn't always reflect
* detection phase, to work cleanly with logical CPU hotplug.
*/
if ((cx->type != ACPI_STATE_C1) && (num_online_cpus() > 1) &&
- !pr->flags.has_cst && !acpi_fadt.plvl2_up)
+ !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
cx = &pr->power.states[ACPI_STATE_C1];
#endif
case ACPI_STATE_C2:
/* Get start time (ticks) */
- t1 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C2 */
acpi_cstate_enter(cx);
/* Get end time (ticks) */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
#ifdef CONFIG_GENERIC_TIME
/* TSC halts in C2, so notify users */
* All CPUs are trying to go to C3
* Disable bus master arbitration
*/
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 1);
}
} else {
/* SMP with no shared cache... Invalidate cache */
}
/* Get start time (ticks) */
- t1 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t1 = inl(acpi_gbl_FADT.xpm_timer_block.address);
/* Invoke C3 */
acpi_cstate_enter(cx);
/* Get end time (ticks) */
- t2 = inl(acpi_fadt.xpm_tmr_blk.address);
+ t2 = inl(acpi_gbl_FADT.xpm_timer_block.address);
if (pr->flags.bm_check) {
/* Enable bus master arbitration */
atomic_dec(&c3_cpu_count);
- acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0,
- ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_ARB_DISABLE, 0);
}
#ifdef CONFIG_GENERIC_TIME
#ifdef CONFIG_HOTPLUG_CPU
/* Don't do promotion/demotion */
if ((cx->type == ACPI_STATE_C1) && (num_online_cpus() > 1) &&
- !pr->flags.has_cst && !acpi_fadt.plvl2_up) {
+ !pr->flags.has_cst && !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED)) {
next_state = cx;
goto end;
}
* Check for P_LVL2_UP flag before entering C2 and above on
* an SMP system.
*/
- if ((num_online_cpus() > 1) && !acpi_fadt.plvl2_up)
+ if ((num_online_cpus() > 1) &&
+ !(acpi_gbl_FADT.flags & ACPI_FADT_C2_MP_SUPPORTED))
return -ENODEV;
#endif
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
- pr->power.states[ACPI_STATE_C2].latency = acpi_fadt.plvl2_lat;
- pr->power.states[ACPI_STATE_C3].latency = acpi_fadt.plvl3_lat;
+ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
+ pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"lvl2[0x%08x] lvl3[0x%08x]\n",
* WBINVD should be set in fadt, for C3 state to be
* supported on when bm_check is not required.
*/
- if (acpi_fadt.wb_invd != 1) {
+ if (!(acpi_gbl_FADT.flags & ACPI_FADT_WBINVD)) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Cache invalidation should work properly"
" for C3 to be enabled on SMP systems\n"));
return;
}
- acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD,
- 0, ACPI_MTX_DO_NOT_LOCK);
+ acpi_set_register(ACPI_BITREG_BUS_MASTER_RLD, 0);
}
/*
seq_printf(seq, "latency[%03d] usage[%08d] duration[%020llu]\n",
pr->power.states[i].latency,
pr->power.states[i].usage,
- pr->power.states[i].time);
+ (unsigned long long)pr->power.states[i].time);
}
end:
if (!pr)
return -EINVAL;
- if (acpi_fadt.cst_cnt && !nocst) {
+ if (acpi_gbl_FADT.cst_control && !nocst) {
status =
- acpi_os_write_port(acpi_fadt.smi_cmd, acpi_fadt.cst_cnt, 8);
+ acpi_os_write_port(acpi_gbl_FADT.smi_command, acpi_gbl_FADT.cst_control, 8);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
"Notifying BIOS of _CST ability failed"));
is_done = -EIO;
- /* Can't write pstate_cnt to smi_cmd if either value is zero */
- if ((!acpi_fadt.smi_cmd) || (!acpi_fadt.pstate_cnt)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_cnt\n"));
+ /* Can't write pstate_control to smi_command if either value is zero */
+ if ((!acpi_gbl_FADT.smi_command) || (!acpi_gbl_FADT.pstate_control)) {
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No SMI port or pstate_control\n"));
module_put(calling_module);
return 0;
}
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Writing pstate_cnt [0x%x] to smi_cmd [0x%x]\n",
- acpi_fadt.pstate_cnt, acpi_fadt.smi_cmd));
+ "Writing pstate_control [0x%x] to smi_command [0x%x]\n",
+ acpi_gbl_FADT.pstate_control, acpi_gbl_FADT.smi_command));
- /* FADT v1 doesn't support pstate_cnt, many BIOS vendors use
- * it anyway, so we need to support it... */
- if (acpi_fadt_is_v1) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Using v1.0 FADT reserved value for pstate_cnt\n"));
- }
-
- status = acpi_os_write_port(acpi_fadt.smi_cmd,
- (u32) acpi_fadt.pstate_cnt, 8);
+ status = acpi_os_write_port(acpi_gbl_FADT.smi_command,
+ (u32) acpi_gbl_FADT.pstate_control, 8);
if (ACPI_FAILURE(status)) {
ACPI_EXCEPTION((AE_INFO, status,
- "Failed to write pstate_cnt [0x%x] to "
- "smi_cmd [0x%x]", acpi_fadt.pstate_cnt,
- acpi_fadt.smi_cmd));
+ "Failed to write pstate_control [0x%x] to "
+ "smi_command [0x%x]", acpi_gbl_FADT.pstate_control,
+ acpi_gbl_FADT.smi_command));
module_put(calling_module);
return status;
}
/* Used to clear all duty_value bits */
duty_mask = pr->throttling.state_count - 1;
- duty_mask <<= acpi_fadt.duty_offset;
+ duty_mask <<= acpi_gbl_FADT.duty_offset;
duty_mask = ~duty_mask;
}
return 0;
}
- pr->throttling.state_count = 1 << acpi_fadt.duty_width;
+ pr->throttling.state_count = 1 << acpi_gbl_FADT.duty_width;
/*
* Compute state values. Note that throttling displays a linear power/
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_BUS_DEVICE_NAME "System Bus"
static LIST_HEAD(acpi_device_list);
+static LIST_HEAD(acpi_bus_id_list);
DEFINE_SPINLOCK(acpi_device_lock);
LIST_HEAD(acpi_wakeup_device_list);
+struct acpi_device_bus_id{
+ char bus_id[15];
+ unsigned int instance_no;
+ struct list_head node;
+};
+static int acpi_eject_operation(acpi_handle handle, int lockable)
+{
+ struct acpi_object_list arg_list;
+ union acpi_object arg;
+ acpi_status status = AE_OK;
+
+ /*
+ * TBD: evaluate _PS3?
+ */
+
+ if (lockable) {
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 0;
+ acpi_evaluate_object(handle, "_LCK", &arg_list, NULL);
+ }
-static void acpi_device_release(struct kobject *kobj)
+ arg_list.count = 1;
+ arg_list.pointer = &arg;
+ arg.type = ACPI_TYPE_INTEGER;
+ arg.integer.value = 1;
+
+ /*
+ * TBD: _EJD support.
+ */
+
+ status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
+ if (ACPI_FAILURE(status)) {
+ return (-ENODEV);
+ }
+
+ return (0);
+}
+
+static ssize_t
+acpi_eject_store(struct device *d, struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct acpi_device *dev = container_of(kobj, struct acpi_device, kobj);
- kfree(dev->pnp.cid_list);
- kfree(dev);
+ int result;
+ int ret = count;
+ int islockable;
+ acpi_status status;
+ acpi_handle handle;
+ acpi_object_type type = 0;
+ struct acpi_device *acpi_device = to_acpi_device(d);
+
+ if ((!count) || (buf[0] != '1')) {
+ return -EINVAL;
+ }
+#ifndef FORCE_EJECT
+ if (acpi_device->driver == NULL) {
+ ret = -ENODEV;
+ goto err;
+ }
+#endif
+ status = acpi_get_type(acpi_device->handle, &type);
+ if (ACPI_FAILURE(status) || (!acpi_device->flags.ejectable)) {
+ ret = -ENODEV;
+ goto err;
+ }
+
+ islockable = acpi_device->flags.lockable;
+ handle = acpi_device->handle;
+
+ result = acpi_bus_trim(acpi_device, 1);
+
+ if (!result)
+ result = acpi_eject_operation(handle, islockable);
+
+ if (result) {
+ ret = -EBUSY;
+ }
+ err:
+ return ret;
}
-struct acpi_device_attribute {
- struct attribute attr;
- ssize_t(*show) (struct acpi_device *, char *);
- ssize_t(*store) (struct acpi_device *, const char *, size_t);
-};
+static DEVICE_ATTR(eject, 0200, NULL, acpi_eject_store);
-typedef void acpi_device_sysfs_files(struct kobject *,
- const struct attribute *);
+static ssize_t
+acpi_device_hid_show(struct device *dev, struct device_attribute *attr, char *buf) {
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
-static void setup_sys_fs_device_files(struct acpi_device *dev,
- acpi_device_sysfs_files * func);
+ return sprintf(buf, "%s\n", acpi_dev->pnp.hardware_id);
+}
+static DEVICE_ATTR(hid, 0444, acpi_device_hid_show, NULL);
-#define create_sysfs_device_files(dev) \
- setup_sys_fs_device_files(dev, (acpi_device_sysfs_files *)&sysfs_create_file)
-#define remove_sysfs_device_files(dev) \
- setup_sys_fs_device_files(dev, (acpi_device_sysfs_files *)&sysfs_remove_file)
+static ssize_t
+acpi_device_path_show(struct device *dev, struct device_attribute *attr, char *buf) {
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_buffer path = {ACPI_ALLOCATE_BUFFER, NULL};
+ int result;
-#define to_acpi_device(n) container_of(n, struct acpi_device, kobj)
-#define to_handle_attr(n) container_of(n, struct acpi_device_attribute, attr);
+ result = acpi_get_name(acpi_dev->handle, ACPI_FULL_PATHNAME, &path);
+ if(result)
+ goto end;
-static ssize_t acpi_device_attr_show(struct kobject *kobj,
- struct attribute *attr, char *buf)
+ result = sprintf(buf, "%s\n", (char*)path.pointer);
+ kfree(path.pointer);
+ end:
+ return result;
+}
+static DEVICE_ATTR(path, 0444, acpi_device_path_show, NULL);
+
+static int acpi_device_setup_files(struct acpi_device *dev)
+{
+ acpi_status status;
+ acpi_handle temp;
+ int result = 0;
+
+ /*
+ * Devices gotten from FADT don't have a "path" attribute
+ */
+ if(dev->handle) {
+ result = device_create_file(&dev->dev, &dev_attr_path);
+ if(result)
+ goto end;
+ }
+
+ if(dev->flags.hardware_id) {
+ result = device_create_file(&dev->dev, &dev_attr_hid);
+ if(result)
+ goto end;
+ }
+
+ /*
+ * If device has _EJ0, 'eject' file is created that is used to trigger
+ * hot-removal function from userland.
+ */
+ status = acpi_get_handle(dev->handle, "_EJ0", &temp);
+ if (ACPI_SUCCESS(status))
+ result = device_create_file(&dev->dev, &dev_attr_eject);
+ end:
+ return result;
+}
+
+static void acpi_device_remove_files(struct acpi_device *dev)
{
- struct acpi_device *device = to_acpi_device(kobj);
- struct acpi_device_attribute *attribute = to_handle_attr(attr);
- return attribute->show ? attribute->show(device, buf) : -EIO;
+ acpi_status status;
+ acpi_handle temp;
+
+ /*
+ * If device has _EJ0, 'eject' file is created that is used to trigger
+ * hot-removal function from userland.
+ */
+ status = acpi_get_handle(dev->handle, "_EJ0", &temp);
+ if (ACPI_SUCCESS(status))
+ device_remove_file(&dev->dev, &dev_attr_eject);
+
+ if(dev->flags.hardware_id)
+ device_remove_file(&dev->dev, &dev_attr_hid);
+ if(dev->handle)
+ device_remove_file(&dev->dev, &dev_attr_path);
}
-static ssize_t acpi_device_attr_store(struct kobject *kobj,
- struct attribute *attr, const char *buf,
- size_t len)
+/* --------------------------------------------------------------------------
+ ACPI Bus operations
+ -------------------------------------------------------------------------- */
+static void acpi_device_release(struct device *dev)
{
- struct acpi_device *device = to_acpi_device(kobj);
- struct acpi_device_attribute *attribute = to_handle_attr(attr);
- return attribute->store ? attribute->store(device, buf, len) : -EIO;
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+
+ kfree(acpi_dev->pnp.cid_list);
+ kfree(acpi_dev);
}
-static struct sysfs_ops acpi_device_sysfs_ops = {
- .show = acpi_device_attr_show,
- .store = acpi_device_attr_store,
-};
+static int acpi_device_suspend(struct device *dev, pm_message_t state)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = acpi_dev->driver;
-static struct kobj_type ktype_acpi_ns = {
- .sysfs_ops = &acpi_device_sysfs_ops,
- .release = acpi_device_release,
-};
+ if (acpi_drv && acpi_drv->ops.suspend)
+ return acpi_drv->ops.suspend(acpi_dev, state);
+ return 0;
+}
-static int namespace_uevent(struct kset *kset, struct kobject *kobj,
- char **envp, int num_envp, char *buffer,
- int buffer_size)
+static int acpi_device_resume(struct device *dev)
{
- struct acpi_device *dev = to_acpi_device(kobj);
- int i = 0;
- int len = 0;
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = acpi_dev->driver;
- if (!dev->driver)
- return 0;
+ if (acpi_drv && acpi_drv->ops.resume)
+ return acpi_drv->ops.resume(acpi_dev);
+ return 0;
+}
- if (add_uevent_var(envp, num_envp, &i, buffer, buffer_size, &len,
- "PHYSDEVDRIVER=%s", dev->driver->name))
+static int acpi_bus_match(struct device *dev, struct device_driver *drv)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = to_acpi_driver(drv);
+
+ return !acpi_match_ids(acpi_dev, acpi_drv->ids);
+}
+
+static int acpi_device_uevent(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ int i = 0, length = 0, ret = 0;
+
+ if (acpi_dev->flags.hardware_id)
+ ret = add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "HWID=%s", acpi_dev->pnp.hardware_id);
+ if (ret)
return -ENOMEM;
+ if (acpi_dev->flags.compatible_ids) {
+ int j;
+ struct acpi_compatible_id_list *cid_list;
+
+ cid_list = acpi_dev->pnp.cid_list;
+
+ for (j = 0; j < cid_list->count; j++) {
+ ret = add_uevent_var(envp, num_envp, &i, buffer,
+ buffer_size, &length, "COMPTID=%s",
+ cid_list->id[j].value);
+ if (ret)
+ return -ENOMEM;
+ }
+ }
envp[i] = NULL;
+ return 0;
+}
+
+static int acpi_bus_driver_init(struct acpi_device *, struct acpi_driver *);
+static int acpi_start_single_object(struct acpi_device *);
+static int acpi_device_probe(struct device * dev)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = to_acpi_driver(dev->driver);
+ int ret;
+
+ ret = acpi_bus_driver_init(acpi_dev, acpi_drv);
+ if (!ret) {
+ if (acpi_dev->bus_ops.acpi_op_start)
+ acpi_start_single_object(acpi_dev);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Found driver [%s] for device [%s]\n",
+ acpi_drv->name, acpi_dev->pnp.bus_id));
+ get_device(dev);
+ }
+ return ret;
+}
+static int acpi_device_remove(struct device * dev)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = acpi_dev->driver;
+
+ if (acpi_drv) {
+ if (acpi_drv->ops.stop)
+ acpi_drv->ops.stop(acpi_dev, acpi_dev->removal_type);
+ if (acpi_drv->ops.remove)
+ acpi_drv->ops.remove(acpi_dev, acpi_dev->removal_type);
+ }
+ acpi_dev->driver = NULL;
+ acpi_driver_data(dev) = NULL;
+
+ put_device(dev);
return 0;
}
-static struct kset_uevent_ops namespace_uevent_ops = {
- .uevent = &namespace_uevent,
-};
+static void acpi_device_shutdown(struct device *dev)
+{
+ struct acpi_device *acpi_dev = to_acpi_device(dev);
+ struct acpi_driver *acpi_drv = acpi_dev->driver;
-static struct kset acpi_namespace_kset = {
- .kobj = {
- .name = "namespace",
- },
- .subsys = &acpi_subsys,
- .ktype = &ktype_acpi_ns,
- .uevent_ops = &namespace_uevent_ops,
+ if (acpi_drv && acpi_drv->ops.shutdown)
+ acpi_drv->ops.shutdown(acpi_dev);
+
+ return ;
+}
+
+static struct bus_type acpi_bus_type = {
+ .name = "acpi",
+ .suspend = acpi_device_suspend,
+ .resume = acpi_device_resume,
+ .shutdown = acpi_device_shutdown,
+ .match = acpi_bus_match,
+ .probe = acpi_device_probe,
+ .remove = acpi_device_remove,
+ .uevent = acpi_device_uevent,
};
-static void acpi_device_register(struct acpi_device *device,
+static int acpi_device_register(struct acpi_device *device,
struct acpi_device *parent)
{
- int err;
-
+ int result;
+ struct acpi_device_bus_id *acpi_device_bus_id, *new_bus_id;
+ int found = 0;
/*
* Linkage
* -------
INIT_LIST_HEAD(&device->g_list);
INIT_LIST_HEAD(&device->wakeup_list);
+ new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL);
+ if (!new_bus_id) {
+ printk(KERN_ERR PREFIX "Memory allocation error\n");
+ return -ENOMEM;
+ }
+
spin_lock(&acpi_device_lock);
+ /*
+ * Find suitable bus_id and instance number in acpi_bus_id_list
+ * If failed, create one and link it into acpi_bus_id_list
+ */
+ list_for_each_entry(acpi_device_bus_id, &acpi_bus_id_list, node) {
+ if(!strcmp(acpi_device_bus_id->bus_id, device->flags.hardware_id? device->pnp.hardware_id : "device")) {
+ acpi_device_bus_id->instance_no ++;
+ found = 1;
+ kfree(new_bus_id);
+ break;
+ }
+ }
+ if(!found) {
+ acpi_device_bus_id = new_bus_id;
+ strcpy(acpi_device_bus_id->bus_id, device->flags.hardware_id ? device->pnp.hardware_id : "device");
+ acpi_device_bus_id->instance_no = 0;
+ list_add_tail(&acpi_device_bus_id->node, &acpi_bus_id_list);
+ }
+ sprintf(device->dev.bus_id, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no);
+
if (device->parent) {
list_add_tail(&device->node, &device->parent->children);
list_add_tail(&device->g_list, &device->parent->g_list);
list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list);
spin_unlock(&acpi_device_lock);
- strlcpy(device->kobj.name, device->pnp.bus_id, KOBJ_NAME_LEN);
- if (parent)
- device->kobj.parent = &parent->kobj;
- device->kobj.ktype = &ktype_acpi_ns;
- device->kobj.kset = &acpi_namespace_kset;
- err = kobject_register(&device->kobj);
- if (err < 0)
- printk(KERN_WARNING "%s: kobject_register error: %d\n",
- __FUNCTION__, err);
- create_sysfs_device_files(device);
+ if (device->parent)
+ device->dev.parent = &parent->dev;
+ device->dev.bus = &acpi_bus_type;
+ device_initialize(&device->dev);
+ device->dev.release = &acpi_device_release;
+ result = device_add(&device->dev);
+ if(result) {
+ printk("Error adding device %s", device->dev.bus_id);
+ goto end;
+ }
+
+ result = acpi_device_setup_files(device);
+ if(result)
+ ACPI_DEBUG_PRINT((ACPI_DB_ERROR, "Error creating sysfs interface for device %s\n", device->dev.bus_id));
+
+ device->removal_type = ACPI_BUS_REMOVAL_NORMAL;
+ return 0;
+ end:
+ spin_lock(&acpi_device_lock);
+ if (device->parent) {
+ list_del(&device->node);
+ list_del(&device->g_list);
+ } else
+ list_del(&device->g_list);
+ list_del(&device->wakeup_list);
+ spin_unlock(&acpi_device_lock);
+ return result;
}
static void acpi_device_unregister(struct acpi_device *device, int type)
list_del(&device->g_list);
list_del(&device->wakeup_list);
-
spin_unlock(&acpi_device_lock);
acpi_detach_data(device->handle, acpi_bus_data_handler);
- remove_sysfs_device_files(device);
- kobject_unregister(&device->kobj);
+
+ acpi_device_remove_files(device);
+ device_unregister(&device->dev);
}
-void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context)
+/* --------------------------------------------------------------------------
+ Driver Management
+ -------------------------------------------------------------------------- */
+/**
+ * acpi_bus_driver_init - add a device to a driver
+ * @device: the device to add and initialize
+ * @driver: driver for the device
+ *
+ * Used to initialize a device via its device driver. Called whenever a
+ * driver is bound to a device. Invokes the driver's add() ops.
+ */
+static int
+acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
{
+ int result = 0;
- /* TBD */
- return;
-}
+ if (!device || !driver)
+ return -EINVAL;
-static int acpi_bus_get_power_flags(struct acpi_device *device)
-{
- acpi_status status = 0;
- acpi_handle handle = NULL;
- u32 i = 0;
+ if (!driver->ops.add)
+ return -ENOSYS;
+ result = driver->ops.add(device);
+ if (result) {
+ device->driver = NULL;
+ acpi_driver_data(device) = NULL;
+ return result;
+ }
- /*
- * Power Management Flags
- */
- status = acpi_get_handle(device->handle, "_PSC", &handle);
- if (ACPI_SUCCESS(status))
- device->power.flags.explicit_get = 1;
- status = acpi_get_handle(device->handle, "_IRC", &handle);
- if (ACPI_SUCCESS(status))
- device->power.flags.inrush_current = 1;
+ device->driver = driver;
/*
- * Enumerate supported power management states
+ * TBD - Configuration Management: Assign resources to device based
+ * upon possible configuration and currently allocated resources.
*/
- for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
- struct acpi_device_power_state *ps = &device->power.states[i];
- char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
- /* Evaluate "_PRx" to se if power resources are referenced */
- acpi_evaluate_reference(device->handle, object_name, NULL,
- &ps->resources);
- if (ps->resources.count) {
- device->power.flags.power_resources = 1;
- ps->flags.valid = 1;
- }
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO,
+ "Driver successfully bound to device\n"));
+ return 0;
+}
- /* Evaluate "_PSx" to see if we can do explicit sets */
- object_name[2] = 'S';
- status = acpi_get_handle(device->handle, object_name, &handle);
- if (ACPI_SUCCESS(status)) {
- ps->flags.explicit_set = 1;
- ps->flags.valid = 1;
- }
+static int acpi_start_single_object(struct acpi_device *device)
+{
+ int result = 0;
+ struct acpi_driver *driver;
+
+
+ if (!(driver = device->driver))
+ return 0;
+
+ if (driver->ops.start) {
+ result = driver->ops.start(device);
+ if (result && driver->ops.remove)
+ driver->ops.remove(device, ACPI_BUS_REMOVAL_NORMAL);
+ }
+
+ return result;
+}
+
+/**
+ * acpi_bus_register_driver - register a driver with the ACPI bus
+ * @driver: driver being registered
+ *
+ * Registers a driver with the ACPI bus. Searches the namespace for all
+ * devices that match the driver's criteria and binds. Returns zero for
+ * success or a negative error status for failure.
+ */
+int acpi_bus_register_driver(struct acpi_driver *driver)
+{
+ int ret;
+
+ if (acpi_disabled)
+ return -ENODEV;
+ driver->drv.name = driver->name;
+ driver->drv.bus = &acpi_bus_type;
+ driver->drv.owner = driver->owner;
+
+ ret = driver_register(&driver->drv);
+ return ret;
+}
+
+EXPORT_SYMBOL(acpi_bus_register_driver);
+
+/**
+ * acpi_bus_unregister_driver - unregisters a driver with the APIC bus
+ * @driver: driver to unregister
+ *
+ * Unregisters a driver with the ACPI bus. Searches the namespace for all
+ * devices that match the driver's criteria and unbinds.
+ */
+void acpi_bus_unregister_driver(struct acpi_driver *driver)
+{
+ driver_unregister(&driver->drv);
+}
+
+EXPORT_SYMBOL(acpi_bus_unregister_driver);
+
+/* --------------------------------------------------------------------------
+ Device Enumeration
+ -------------------------------------------------------------------------- */
+acpi_status
+acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
+{
+ acpi_status status;
+ acpi_handle tmp;
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *obj;
- /* State is valid if we have some power control */
- if (ps->resources.count || ps->flags.explicit_set)
- ps->flags.valid = 1;
+ status = acpi_get_handle(handle, "_EJD", &tmp);
+ if (ACPI_FAILURE(status))
+ return status;
- ps->power = -1; /* Unknown - driver assigned */
- ps->latency = -1; /* Unknown - driver assigned */
+ status = acpi_evaluate_object(handle, "_EJD", NULL, &buffer);
+ if (ACPI_SUCCESS(status)) {
+ obj = buffer.pointer;
+ status = acpi_get_handle(NULL, obj->string.pointer, ejd);
+ kfree(buffer.pointer);
}
+ return status;
+}
+EXPORT_SYMBOL_GPL(acpi_bus_get_ejd);
- /* Set defaults for D0 and D3 states (always valid) */
- device->power.states[ACPI_STATE_D0].flags.valid = 1;
- device->power.states[ACPI_STATE_D0].power = 100;
- device->power.states[ACPI_STATE_D3].flags.valid = 1;
- device->power.states[ACPI_STATE_D3].power = 0;
-
- /* TBD: System wake support and resource requirements. */
+void acpi_bus_data_handler(acpi_handle handle, u32 function, void *context)
+{
- device->power.state = ACPI_STATE_UNKNOWN;
+ /* TBD */
- return 0;
+ return;
}
int acpi_match_ids(struct acpi_device *device, char *ids)
return -ENOENT;
}
+static int acpi_bus_get_perf_flags(struct acpi_device *device)
+{
+ device->performance.state = ACPI_STATE_UNKNOWN;
+ return 0;
+}
+
static acpi_status
acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
union acpi_object *package)
kfree(buffer.pointer);
- device->wakeup.flags.valid = 1;
- /* Power button, Lid switch always enable wakeup */
- if (!acpi_match_ids(device, "PNP0C0D,PNP0C0C,PNP0C0E"))
- device->wakeup.flags.run_wake = 1;
-
- end:
- if (ACPI_FAILURE(status))
- device->flags.wake_capable = 0;
- return 0;
-}
-
-/* --------------------------------------------------------------------------
- ACPI sysfs device file support
- -------------------------------------------------------------------------- */
-static ssize_t acpi_eject_store(struct acpi_device *device,
- const char *buf, size_t count);
-
-#define ACPI_DEVICE_ATTR(_name,_mode,_show,_store) \
-static struct acpi_device_attribute acpi_device_attr_##_name = \
- __ATTR(_name, _mode, _show, _store)
-
-ACPI_DEVICE_ATTR(eject, 0200, NULL, acpi_eject_store);
-
-/**
- * setup_sys_fs_device_files - sets up the device files under device namespace
- * @dev: acpi_device object
- * @func: function pointer to create or destroy the device file
- */
-static void
-setup_sys_fs_device_files(struct acpi_device *dev,
- acpi_device_sysfs_files * func)
-{
- acpi_status status;
- acpi_handle temp = NULL;
-
- /*
- * If device has _EJ0, 'eject' file is created that is used to trigger
- * hot-removal function from userland.
- */
- status = acpi_get_handle(dev->handle, "_EJ0", &temp);
- if (ACPI_SUCCESS(status))
- (*(func)) (&dev->kobj, &acpi_device_attr_eject.attr);
-}
-
-static int acpi_eject_operation(acpi_handle handle, int lockable)
-{
- struct acpi_object_list arg_list;
- union acpi_object arg;
- acpi_status status = AE_OK;
-
- /*
- * TBD: evaluate _PS3?
- */
-
- if (lockable) {
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = 0;
- acpi_evaluate_object(handle, "_LCK", &arg_list, NULL);
- }
-
- arg_list.count = 1;
- arg_list.pointer = &arg;
- arg.type = ACPI_TYPE_INTEGER;
- arg.integer.value = 1;
-
- /*
- * TBD: _EJD support.
- */
-
- status = acpi_evaluate_object(handle, "_EJ0", &arg_list, NULL);
- if (ACPI_FAILURE(status)) {
- return (-ENODEV);
- }
-
- return (0);
-}
-
-static ssize_t
-acpi_eject_store(struct acpi_device *device, const char *buf, size_t count)
-{
- int result;
- int ret = count;
- int islockable;
- acpi_status status;
- acpi_handle handle;
- acpi_object_type type = 0;
-
- if ((!count) || (buf[0] != '1')) {
- return -EINVAL;
- }
-#ifndef FORCE_EJECT
- if (device->driver == NULL) {
- ret = -ENODEV;
- goto err;
- }
-#endif
- status = acpi_get_type(device->handle, &type);
- if (ACPI_FAILURE(status) || (!device->flags.ejectable)) {
- ret = -ENODEV;
- goto err;
- }
-
- islockable = device->flags.lockable;
- handle = device->handle;
-
- result = acpi_bus_trim(device, 1);
-
- if (!result)
- result = acpi_eject_operation(handle, islockable);
-
- if (result) {
- ret = -EBUSY;
- }
- err:
- return ret;
-}
-
-/* --------------------------------------------------------------------------
- Performance Management
- -------------------------------------------------------------------------- */
-
-static int acpi_bus_get_perf_flags(struct acpi_device *device)
-{
- device->performance.state = ACPI_STATE_UNKNOWN;
- return 0;
-}
-
-/* --------------------------------------------------------------------------
- Driver Management
- -------------------------------------------------------------------------- */
-
-static LIST_HEAD(acpi_bus_drivers);
-
-/**
- * acpi_bus_match - match device IDs to driver's supported IDs
- * @device: the device that we are trying to match to a driver
- * @driver: driver whose device id table is being checked
- *
- * Checks the device's hardware (_HID) or compatible (_CID) ids to see if it
- * matches the specified driver's criteria.
- */
-static int
-acpi_bus_match(struct acpi_device *device, struct acpi_driver *driver)
-{
- if (driver && driver->ops.match)
- return driver->ops.match(device, driver);
- return acpi_match_ids(device, driver->ids);
-}
-
-/**
- * acpi_bus_driver_init - add a device to a driver
- * @device: the device to add and initialize
- * @driver: driver for the device
- *
- * Used to initialize a device via its device driver. Called whenever a
- * driver is bound to a device. Invokes the driver's add() and start() ops.
- */
-static int
-acpi_bus_driver_init(struct acpi_device *device, struct acpi_driver *driver)
-{
- int result = 0;
-
-
- if (!device || !driver)
- return -EINVAL;
-
- if (!driver->ops.add)
- return -ENOSYS;
-
- result = driver->ops.add(device);
- if (result) {
- device->driver = NULL;
- acpi_driver_data(device) = NULL;
- return result;
- }
-
- device->driver = driver;
-
- /*
- * TBD - Configuration Management: Assign resources to device based
- * upon possible configuration and currently allocated resources.
- */
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Driver successfully bound to device\n"));
- return 0;
-}
-
-static int acpi_start_single_object(struct acpi_device *device)
-{
- int result = 0;
- struct acpi_driver *driver;
-
-
- if (!(driver = device->driver))
- return 0;
-
- if (driver->ops.start) {
- result = driver->ops.start(device);
- if (result && driver->ops.remove)
- driver->ops.remove(device, ACPI_BUS_REMOVAL_NORMAL);
- }
-
- return result;
-}
-
-static void acpi_driver_attach(struct acpi_driver *drv)
-{
- struct list_head *node, *next;
-
-
- spin_lock(&acpi_device_lock);
- list_for_each_safe(node, next, &acpi_device_list) {
- struct acpi_device *dev =
- container_of(node, struct acpi_device, g_list);
-
- if (dev->driver || !dev->status.present)
- continue;
- spin_unlock(&acpi_device_lock);
-
- if (!acpi_bus_match(dev, drv)) {
- if (!acpi_bus_driver_init(dev, drv)) {
- acpi_start_single_object(dev);
- atomic_inc(&drv->references);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found driver [%s] for device [%s]\n",
- drv->name, dev->pnp.bus_id));
- }
- }
- spin_lock(&acpi_device_lock);
- }
- spin_unlock(&acpi_device_lock);
-}
-
-static void acpi_driver_detach(struct acpi_driver *drv)
-{
- struct list_head *node, *next;
-
-
- spin_lock(&acpi_device_lock);
- list_for_each_safe(node, next, &acpi_device_list) {
- struct acpi_device *dev =
- container_of(node, struct acpi_device, g_list);
-
- if (dev->driver == drv) {
- spin_unlock(&acpi_device_lock);
- if (drv->ops.remove)
- drv->ops.remove(dev, ACPI_BUS_REMOVAL_NORMAL);
- spin_lock(&acpi_device_lock);
- dev->driver = NULL;
- dev->driver_data = NULL;
- atomic_dec(&drv->references);
- }
- }
- spin_unlock(&acpi_device_lock);
-}
-
-/**
- * acpi_bus_register_driver - register a driver with the ACPI bus
- * @driver: driver being registered
- *
- * Registers a driver with the ACPI bus. Searches the namespace for all
- * devices that match the driver's criteria and binds. Returns zero for
- * success or a negative error status for failure.
- */
-int acpi_bus_register_driver(struct acpi_driver *driver)
-{
-
- if (acpi_disabled)
- return -ENODEV;
-
- spin_lock(&acpi_device_lock);
- list_add_tail(&driver->node, &acpi_bus_drivers);
- spin_unlock(&acpi_device_lock);
- acpi_driver_attach(driver);
-
+ device->wakeup.flags.valid = 1;
+ /* Power button, Lid switch always enable wakeup */
+ if (!acpi_match_ids(device, "PNP0C0D,PNP0C0C,PNP0C0E"))
+ device->wakeup.flags.run_wake = 1;
+
+ end:
+ if (ACPI_FAILURE(status))
+ device->flags.wake_capable = 0;
return 0;
}
-EXPORT_SYMBOL(acpi_bus_register_driver);
-
-/**
- * acpi_bus_unregister_driver - unregisters a driver with the APIC bus
- * @driver: driver to unregister
- *
- * Unregisters a driver with the ACPI bus. Searches the namespace for all
- * devices that match the driver's criteria and unbinds.
- */
-void acpi_bus_unregister_driver(struct acpi_driver *driver)
+static int acpi_bus_get_power_flags(struct acpi_device *device)
{
- acpi_driver_detach(driver);
+ acpi_status status = 0;
+ acpi_handle handle = NULL;
+ u32 i = 0;
- if (!atomic_read(&driver->references)) {
- spin_lock(&acpi_device_lock);
- list_del_init(&driver->node);
- spin_unlock(&acpi_device_lock);
- }
- return;
-}
-EXPORT_SYMBOL(acpi_bus_unregister_driver);
+ /*
+ * Power Management Flags
+ */
+ status = acpi_get_handle(device->handle, "_PSC", &handle);
+ if (ACPI_SUCCESS(status))
+ device->power.flags.explicit_get = 1;
+ status = acpi_get_handle(device->handle, "_IRC", &handle);
+ if (ACPI_SUCCESS(status))
+ device->power.flags.inrush_current = 1;
-/**
- * acpi_bus_find_driver - check if there is a driver installed for the device
- * @device: device that we are trying to find a supporting driver for
- *
- * Parses the list of registered drivers looking for a driver applicable for
- * the specified device.
- */
-static int acpi_bus_find_driver(struct acpi_device *device)
-{
- int result = 0;
- struct list_head *node, *next;
+ /*
+ * Enumerate supported power management states
+ */
+ for (i = ACPI_STATE_D0; i <= ACPI_STATE_D3; i++) {
+ struct acpi_device_power_state *ps = &device->power.states[i];
+ char object_name[5] = { '_', 'P', 'R', '0' + i, '\0' };
+ /* Evaluate "_PRx" to se if power resources are referenced */
+ acpi_evaluate_reference(device->handle, object_name, NULL,
+ &ps->resources);
+ if (ps->resources.count) {
+ device->power.flags.power_resources = 1;
+ ps->flags.valid = 1;
+ }
- spin_lock(&acpi_device_lock);
- list_for_each_safe(node, next, &acpi_bus_drivers) {
- struct acpi_driver *driver =
- container_of(node, struct acpi_driver, node);
-
- atomic_inc(&driver->references);
- spin_unlock(&acpi_device_lock);
- if (!acpi_bus_match(device, driver)) {
- result = acpi_bus_driver_init(device, driver);
- if (!result)
- goto Done;
+ /* Evaluate "_PSx" to see if we can do explicit sets */
+ object_name[2] = 'S';
+ status = acpi_get_handle(device->handle, object_name, &handle);
+ if (ACPI_SUCCESS(status)) {
+ ps->flags.explicit_set = 1;
+ ps->flags.valid = 1;
}
- atomic_dec(&driver->references);
- spin_lock(&acpi_device_lock);
- }
- spin_unlock(&acpi_device_lock);
- Done:
- return result;
-}
+ /* State is valid if we have some power control */
+ if (ps->resources.count || ps->flags.explicit_set)
+ ps->flags.valid = 1;
-/* --------------------------------------------------------------------------
- Device Enumeration
- -------------------------------------------------------------------------- */
+ ps->power = -1; /* Unknown - driver assigned */
+ ps->latency = -1; /* Unknown - driver assigned */
+ }
-acpi_status
-acpi_bus_get_ejd(acpi_handle handle, acpi_handle *ejd)
-{
- acpi_status status;
- acpi_handle tmp;
- struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER, NULL};
- union acpi_object *obj;
+ /* Set defaults for D0 and D3 states (always valid) */
+ device->power.states[ACPI_STATE_D0].flags.valid = 1;
+ device->power.states[ACPI_STATE_D0].power = 100;
+ device->power.states[ACPI_STATE_D3].flags.valid = 1;
+ device->power.states[ACPI_STATE_D3].power = 0;
- status = acpi_get_handle(handle, "_EJD", &tmp);
- if (ACPI_FAILURE(status))
- return status;
+ /* TBD: System wake support and resource requirements. */
- status = acpi_evaluate_object(handle, "_EJD", NULL, &buffer);
- if (ACPI_SUCCESS(status)) {
- obj = buffer.pointer;
- status = acpi_get_handle(NULL, obj->string.pointer, ejd);
- kfree(buffer.pointer);
- }
- return status;
-}
-EXPORT_SYMBOL_GPL(acpi_bus_get_ejd);
+ device->power.state = ACPI_STATE_UNKNOWN;
+ return 0;
+}
static int acpi_bus_get_flags(struct acpi_device *device)
{
}
}
+static int
+acpi_video_bus_match(struct acpi_device *device)
+{
+ acpi_handle h_dummy1;
+ acpi_handle h_dummy2;
+ acpi_handle h_dummy3;
+
+
+ if (!device)
+ return -EINVAL;
+
+ /* Since there is no HID, CID for ACPI Video drivers, we have
+ * to check well known required nodes for each feature we support.
+ */
+
+ /* Does this device able to support video switching ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
+ return 0;
+
+ /* Does this device able to retrieve a video ROM ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
+ return 0;
+
+ /* Does this device able to configure which video head to be POSTed ? */
+ if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
+ ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
+ return 0;
+
+ return -ENODEV;
+}
+
+/*
+ * acpi_bay_match - see if a device is an ejectable driver bay
+ *
+ * If an acpi object is ejectable and has one of the ACPI ATA methods defined,
+ * then we can safely call it an ejectable drive bay
+ */
+static int acpi_bay_match(struct acpi_device *device){
+ acpi_status status;
+ acpi_handle handle;
+ acpi_handle tmp;
+ acpi_handle phandle;
+
+ handle = device->handle;
+
+ status = acpi_get_handle(handle, "_EJ0", &tmp);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ if ((ACPI_SUCCESS(acpi_get_handle(handle, "_GTF", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_GTM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_STM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(handle, "_SDD", &tmp))))
+ return 0;
+
+ if (acpi_get_parent(handle, &phandle))
+ return -ENODEV;
+
+ if ((ACPI_SUCCESS(acpi_get_handle(phandle, "_GTF", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(phandle, "_GTM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(phandle, "_STM", &tmp))) ||
+ (ACPI_SUCCESS(acpi_get_handle(phandle, "_SDD", &tmp))))
+ return 0;
+
+ return -ENODEV;
+}
+
static void acpi_device_set_id(struct acpi_device *device,
struct acpi_device *parent, acpi_handle handle,
int type)
device->pnp.bus_address = info->address;
device->flags.bus_address = 1;
}
+
+ if(!(info->valid & (ACPI_VALID_HID | ACPI_VALID_CID))){
+ status = acpi_video_bus_match(device);
+ if(ACPI_SUCCESS(status))
+ hid = ACPI_VIDEO_HID;
+
+ status = acpi_bay_match(device);
+ if (ACPI_SUCCESS(status))
+ hid = ACPI_BAY_HID;
+ }
break;
case ACPI_BUS_TYPE_POWER:
hid = ACPI_POWER_HID;
return result;
}
-static void acpi_device_get_debug_info(struct acpi_device *device,
- acpi_handle handle, int type)
-{
-#ifdef CONFIG_ACPI_DEBUG_OUTPUT
- char *type_string = NULL;
- char name[80] = { '?', '\0' };
- struct acpi_buffer buffer = { sizeof(name), name };
-
- switch (type) {
- case ACPI_BUS_TYPE_DEVICE:
- type_string = "Device";
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- break;
- case ACPI_BUS_TYPE_POWER:
- type_string = "Power Resource";
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- break;
- case ACPI_BUS_TYPE_PROCESSOR:
- type_string = "Processor";
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- break;
- case ACPI_BUS_TYPE_SYSTEM:
- type_string = "System";
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- break;
- case ACPI_BUS_TYPE_THERMAL:
- type_string = "Thermal Zone";
- acpi_get_name(handle, ACPI_FULL_PATHNAME, &buffer);
- break;
- case ACPI_BUS_TYPE_POWER_BUTTON:
- type_string = "Power Button";
- sprintf(name, "PWRB");
- break;
- case ACPI_BUS_TYPE_SLEEP_BUTTON:
- type_string = "Sleep Button";
- sprintf(name, "SLPB");
- break;
- }
-
- printk(KERN_DEBUG "Found %s %s [%p]\n", type_string, name, handle);
-#endif /*CONFIG_ACPI_DEBUG_OUTPUT */
-}
-
static int acpi_bus_remove(struct acpi_device *dev, int rmdevice)
{
- int result = 0;
- struct acpi_driver *driver;
-
-
if (!dev)
return -EINVAL;
- driver = dev->driver;
-
- if ((driver) && (driver->ops.remove)) {
-
- if (driver->ops.stop) {
- result = driver->ops.stop(dev, ACPI_BUS_REMOVAL_EJECT);
- if (result)
- return result;
- }
-
- result = dev->driver->ops.remove(dev, ACPI_BUS_REMOVAL_EJECT);
- if (result) {
- return result;
- }
-
- atomic_dec(&dev->driver->references);
- dev->driver = NULL;
- acpi_driver_data(dev) = NULL;
- }
+ dev->removal_type = ACPI_BUS_REMOVAL_EJECT;
+ device_release_driver(&dev->dev);
if (!rmdevice)
return 0;
+ /*
+ * unbind _ADR-Based Devices when hot removal
+ */
if (dev->flags.bus_address) {
if ((dev->parent) && (dev->parent->ops.unbind))
dev->parent->ops.unbind(dev);
}
-
acpi_device_unregister(dev, ACPI_BUS_REMOVAL_EJECT);
return 0;
static int
acpi_add_single_object(struct acpi_device **child,
- struct acpi_device *parent, acpi_handle handle, int type)
+ struct acpi_device *parent, acpi_handle handle, int type,
+ struct acpi_bus_ops *ops)
{
int result = 0;
struct acpi_device *device = NULL;
device->handle = handle;
device->parent = parent;
+ device->bus_ops = *ops; /* workround for not call .start */
+
acpi_device_get_busid(device, handle, type);
if ((result = acpi_device_set_context(device, type)))
goto end;
- acpi_device_get_debug_info(device, handle, type);
-
- acpi_device_register(device, parent);
+ result = acpi_device_register(device, parent);
/*
- * Bind _ADR-Based Devices
- * -----------------------
- * If there's a a bus address (_ADR) then we utilize the parent's
- * 'bind' function (if exists) to bind the ACPI- and natively-
- * enumerated device representations.
+ * Bind _ADR-Based Devices when hot add
*/
if (device->flags.bus_address) {
if (device->parent && device->parent->ops.bind)
device->parent->ops.bind(device);
}
- /*
- * Locate & Attach Driver
- * ----------------------
- * If there's a hardware id (_HID) or compatible ids (_CID) we check
- * to see if there's a driver installed for this kind of device. Note
- * that drivers can install before or after a device is enumerated.
- *
- * TBD: Assumes LDM provides driver hot-plug capability.
- */
- acpi_bus_find_driver(device);
-
end:
if (!result)
*child = device;
if (ops->acpi_op_add)
status = acpi_add_single_object(&child, parent,
- chandle, type);
+ chandle, type, ops);
else
status = acpi_bus_get_device(chandle, &child);
if (ACPI_FAILURE(status))
continue;
- if (ops->acpi_op_start) {
+ if (ops->acpi_op_start && !(ops->acpi_op_add)) {
status = acpi_start_single_object(child);
if (ACPI_FAILURE(status))
continue;
int result;
struct acpi_bus_ops ops;
+ memset(&ops, 0, sizeof(ops));
+ ops.acpi_op_add = 1;
- result = acpi_add_single_object(child, parent, handle, type);
- if (!result) {
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_add = 1;
+ result = acpi_add_single_object(child, parent, handle, type, &ops);
+ if (!result)
result = acpi_bus_scan(*child, &ops);
- }
+
return result;
}
{
int result = 0;
struct acpi_device *device = NULL;
-
+ struct acpi_bus_ops ops;
if (!root)
return -ENODEV;
+ memset(&ops, 0, sizeof(ops));
+ ops.acpi_op_add = 1;
+ ops.acpi_op_start = 1;
+
/*
* Enumerate all fixed-feature devices.
*/
- if (acpi_fadt.pwr_button == 0) {
+ if ((acpi_gbl_FADT.flags & ACPI_FADT_POWER_BUTTON) == 0) {
result = acpi_add_single_object(&device, acpi_root,
NULL,
- ACPI_BUS_TYPE_POWER_BUTTON);
- if (!result)
- result = acpi_start_single_object(device);
+ ACPI_BUS_TYPE_POWER_BUTTON,
+ &ops);
}
- if (acpi_fadt.sleep_button == 0) {
+ if ((acpi_gbl_FADT.flags & ACPI_FADT_SLEEP_BUTTON) == 0) {
result = acpi_add_single_object(&device, acpi_root,
NULL,
- ACPI_BUS_TYPE_SLEEP_BUTTON);
- if (!result)
- result = acpi_start_single_object(device);
+ ACPI_BUS_TYPE_SLEEP_BUTTON,
+ &ops);
}
return result;
}
-
-static inline struct acpi_device * to_acpi_dev(struct device * dev)
-{
- return container_of(dev, struct acpi_device, dev);
-}
-
-
-static int root_suspend(struct acpi_device * acpi_dev, pm_message_t state)
-{
- struct acpi_device * dev, * next;
- int result;
-
- spin_lock(&acpi_device_lock);
- list_for_each_entry_safe_reverse(dev, next, &acpi_device_list, g_list) {
- if (dev->driver && dev->driver->ops.suspend) {
- spin_unlock(&acpi_device_lock);
- result = dev->driver->ops.suspend(dev, 0);
- if (result) {
- printk(KERN_ERR PREFIX "[%s - %s] Suspend failed: %d\n",
- acpi_device_name(dev),
- acpi_device_bid(dev), result);
- }
- spin_lock(&acpi_device_lock);
- }
- }
- spin_unlock(&acpi_device_lock);
- return 0;
-}
-
-
-static int acpi_device_suspend(struct device * dev, pm_message_t state)
-{
- struct acpi_device * acpi_dev = to_acpi_dev(dev);
-
- /*
- * For now, we should only register 1 generic device -
- * the ACPI root device - and from there, we walk the
- * tree of ACPI devices to suspend each one using the
- * ACPI driver methods.
- */
- if (acpi_dev->handle == ACPI_ROOT_OBJECT)
- root_suspend(acpi_dev, state);
- return 0;
-}
-
-
-
-static int root_resume(struct acpi_device * acpi_dev)
-{
- struct acpi_device * dev, * next;
- int result;
-
- spin_lock(&acpi_device_lock);
- list_for_each_entry_safe(dev, next, &acpi_device_list, g_list) {
- if (dev->driver && dev->driver->ops.resume) {
- spin_unlock(&acpi_device_lock);
- result = dev->driver->ops.resume(dev, 0);
- if (result) {
- printk(KERN_ERR PREFIX "[%s - %s] resume failed: %d\n",
- acpi_device_name(dev),
- acpi_device_bid(dev), result);
- }
- spin_lock(&acpi_device_lock);
- }
- }
- spin_unlock(&acpi_device_lock);
- return 0;
-}
-
-
-static int acpi_device_resume(struct device * dev)
-{
- struct acpi_device * acpi_dev = to_acpi_dev(dev);
-
- /*
- * For now, we should only register 1 generic device -
- * the ACPI root device - and from there, we walk the
- * tree of ACPI devices to resume each one using the
- * ACPI driver methods.
- */
- if (acpi_dev->handle == ACPI_ROOT_OBJECT)
- root_resume(acpi_dev);
- return 0;
-}
-
-
-static struct bus_type acpi_bus_type = {
- .name = "acpi",
- .suspend = acpi_device_suspend,
- .resume = acpi_device_resume,
-};
-
-
-
static int __init acpi_scan_init(void)
{
int result;
if (acpi_disabled)
return 0;
- result = kset_register(&acpi_namespace_kset);
- if (result < 0)
- printk(KERN_ERR PREFIX "kset_register error: %d\n", result);
+ memset(&ops, 0, sizeof(ops));
+ ops.acpi_op_add = 1;
+ ops.acpi_op_start = 1;
result = bus_register(&acpi_bus_type);
if (result) {
* Create the root device in the bus's device tree
*/
result = acpi_add_single_object(&acpi_root, NULL, ACPI_ROOT_OBJECT,
- ACPI_BUS_TYPE_SYSTEM);
+ ACPI_BUS_TYPE_SYSTEM, &ops);
if (result)
goto Done;
- result = acpi_start_single_object(acpi_root);
- if (result)
- goto Done;
-
- acpi_root->dev.bus = &acpi_bus_type;
- snprintf(acpi_root->dev.bus_id, BUS_ID_SIZE, "%s", acpi_bus_type.name);
- result = device_register(&acpi_root->dev);
- if (result) {
- /* We don't want to quit even if we failed to add suspend/resume */
- printk(KERN_ERR PREFIX "Could not register device\n");
- }
-
/*
* Enumerate devices in the ACPI namespace.
*/
result = acpi_bus_scan_fixed(acpi_root);
- if (!result) {
- memset(&ops, 0, sizeof(ops));
- ops.acpi_op_add = 1;
- ops.acpi_op_start = 1;
+ if (!result)
result = acpi_bus_scan(acpi_root, &ops);
- }
if (result)
acpi_device_unregister(acpi_root, ACPI_BUS_REMOVAL_NORMAL);
static int acpi_system_alarm_seq_show(struct seq_file *seq, void *offset)
{
u32 sec, min, hr;
- u32 day, mo, yr;
+ u32 day, mo, yr, cent = 0;
unsigned char rtc_control = 0;
unsigned long flags;
rtc_control = CMOS_READ(RTC_CONTROL);
/* If we ever get an FACP with proper values... */
- if (acpi_gbl_FADT->day_alrm)
+ if (acpi_gbl_FADT.day_alarm)
/* ACPI spec: only low 6 its should be cared */
- day = CMOS_READ(acpi_gbl_FADT->day_alrm) & 0x3F;
+ day = CMOS_READ(acpi_gbl_FADT.day_alarm) & 0x3F;
else
day = CMOS_READ(RTC_DAY_OF_MONTH);
- if (acpi_gbl_FADT->mon_alrm)
- mo = CMOS_READ(acpi_gbl_FADT->mon_alrm);
+ if (acpi_gbl_FADT.month_alarm)
+ mo = CMOS_READ(acpi_gbl_FADT.month_alarm);
else
mo = CMOS_READ(RTC_MONTH);
- if (acpi_gbl_FADT->century)
- yr = CMOS_READ(acpi_gbl_FADT->century) * 100 +
- CMOS_READ(RTC_YEAR);
- else
- yr = CMOS_READ(RTC_YEAR);
+ if (acpi_gbl_FADT.century)
+ cent = CMOS_READ(acpi_gbl_FADT.century);
+
+ yr = CMOS_READ(RTC_YEAR);
spin_unlock_irqrestore(&rtc_lock, flags);
BCD_TO_BIN(day);
BCD_TO_BIN(mo);
BCD_TO_BIN(yr);
+ BCD_TO_BIN(cent);
}
/* we're trusting the FADT (see above) */
- if (!acpi_gbl_FADT->century)
+ if (!acpi_gbl_FADT.century)
/* If we're not trusting the FADT, we should at least make it
* right for _this_ century... ehm, what is _this_ century?
*
*
*/
yr += 2000;
+ else
+ yr += cent * 100;
seq_printf(seq, "%4.4u-", yr);
(mo > 12) ? seq_puts(seq, "**-") : seq_printf(seq, "%2.2u-", mo);
* offsets into the CMOS RAM here -- which for some reason are pointing
* to the RTC area of memory.
*/
- if (acpi_gbl_FADT->day_alrm)
- CMOS_WRITE(day, acpi_gbl_FADT->day_alrm);
- if (acpi_gbl_FADT->mon_alrm)
- CMOS_WRITE(mo, acpi_gbl_FADT->mon_alrm);
- if (acpi_gbl_FADT->century)
- CMOS_WRITE(yr / 100, acpi_gbl_FADT->century);
+ if (acpi_gbl_FADT.day_alarm)
+ CMOS_WRITE(day, acpi_gbl_FADT.day_alarm);
+ if (acpi_gbl_FADT.month_alarm)
+ CMOS_WRITE(mo, acpi_gbl_FADT.month_alarm);
+ if (acpi_gbl_FADT.century)
+ CMOS_WRITE(yr / 100, acpi_gbl_FADT.century);
/* enable the rtc alarm interrupt */
rtc_control |= RTC_AIE;
CMOS_WRITE(rtc_control, RTC_CONTROL);
#define _COMPONENT ACPI_SYSTEM_COMPONENT
ACPI_MODULE_NAME("acpi_system")
+#ifdef MODULE_PARAM_PREFIX
+#undef MODULE_PARAM_PREFIX
+#endif
+#define MODULE_PARAM_PREFIX "acpi."
+
#define ACPI_SYSTEM_CLASS "system"
#define ACPI_SYSTEM_DRIVER_NAME "ACPI System Driver"
#define ACPI_SYSTEM_DEVICE_NAME "System"
#define ACPI_SYSTEM_FILE_EVENT "event"
#define ACPI_SYSTEM_FILE_DSDT "dsdt"
#define ACPI_SYSTEM_FILE_FADT "fadt"
-extern struct fadt_descriptor acpi_fadt;
+
+/*
+ * Make ACPICA version work as module param
+ */
+static int param_get_acpica_version(char *buffer, struct kernel_param *kp) {
+ int result;
+
+ result = sprintf(buffer, "%x", ACPI_CA_VERSION);
+
+ return result;
+}
+
+module_param_call(acpica_version, NULL, param_get_acpica_version, NULL, 0444);
/* --------------------------------------------------------------------------
FS Interface (/proc)
-------------------------------------------------------------------------- */
+#ifdef CONFIG_ACPI_PROCFS
static int acpi_system_read_info(struct seq_file *seq, void *offset)
{
.llseek = seq_lseek,
.release = single_release,
};
+#endif
static ssize_t acpi_system_read_dsdt(struct file *, char __user *, size_t,
loff_t *);
char __user * buffer, size_t count, loff_t * ppos)
{
acpi_status status = AE_OK;
- struct acpi_buffer dsdt = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_table_header *dsdt = NULL;
ssize_t res;
- status = acpi_get_table(ACPI_TABLE_ID_DSDT, 1, &dsdt);
+ status = acpi_get_table(ACPI_SIG_DSDT, 1, &dsdt);
if (ACPI_FAILURE(status))
return -ENODEV;
res = simple_read_from_buffer(buffer, count, ppos,
- dsdt.pointer, dsdt.length);
- kfree(dsdt.pointer);
+ dsdt, dsdt->length);
return res;
}
char __user * buffer, size_t count, loff_t * ppos)
{
acpi_status status = AE_OK;
- struct acpi_buffer fadt = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_table_header *fadt = NULL;
ssize_t res;
- status = acpi_get_table(ACPI_TABLE_ID_FADT, 1, &fadt);
+ status = acpi_get_table(ACPI_SIG_FADT, 1, &fadt);
if (ACPI_FAILURE(status))
return -ENODEV;
res = simple_read_from_buffer(buffer, count, ppos,
- fadt.pointer, fadt.length);
- kfree(fadt.pointer);
+ fadt, fadt->length);
return res;
}
if (acpi_disabled)
return 0;
+#ifdef CONFIG_ACPI_PROCFS
/* 'info' [R] */
name = ACPI_SYSTEM_FILE_INFO;
entry = create_proc_entry(name, S_IRUGO, acpi_root_dir);
else {
entry->proc_fops = &acpi_system_info_ops;
}
+#endif
/* 'dsdt' [R] */
name = ACPI_SYSTEM_FILE_DSDT;
Error:
remove_proc_entry(ACPI_SYSTEM_FILE_FADT, acpi_root_dir);
remove_proc_entry(ACPI_SYSTEM_FILE_DSDT, acpi_root_dir);
+#ifdef CONFIG_ACPI_PROCFS
remove_proc_entry(ACPI_SYSTEM_FILE_INFO, acpi_root_dir);
+#endif
error = -EFAULT;
goto Done;
#define ACPI_MAX_TABLES 128
-static char *acpi_table_signatures[ACPI_TABLE_COUNT] = {
- [ACPI_TABLE_UNKNOWN] = "????",
- [ACPI_APIC] = "APIC",
- [ACPI_BOOT] = "BOOT",
- [ACPI_DBGP] = "DBGP",
- [ACPI_DSDT] = "DSDT",
- [ACPI_ECDT] = "ECDT",
- [ACPI_ETDT] = "ETDT",
- [ACPI_FADT] = "FACP",
- [ACPI_FACS] = "FACS",
- [ACPI_OEMX] = "OEM",
- [ACPI_PSDT] = "PSDT",
- [ACPI_SBST] = "SBST",
- [ACPI_SLIT] = "SLIT",
- [ACPI_SPCR] = "SPCR",
- [ACPI_SRAT] = "SRAT",
- [ACPI_SSDT] = "SSDT",
- [ACPI_SPMI] = "SPMI",
- [ACPI_HPET] = "HPET",
- [ACPI_MCFG] = "MCFG",
-};
-
static char *mps_inti_flags_polarity[] = { "dfl", "high", "res", "low" };
static char *mps_inti_flags_trigger[] = { "dfl", "edge", "res", "level" };
-/* System Description Table (RSDT/XSDT) */
-struct acpi_table_sdt {
- unsigned long pa;
- enum acpi_table_id id;
- unsigned long size;
-} __attribute__ ((packed));
-
-static unsigned long sdt_pa; /* Physical Address */
-static unsigned long sdt_count; /* Table count */
+static struct acpi_table_desc initial_tables[ACPI_MAX_TABLES] __initdata;
-static struct acpi_table_sdt sdt_entry[ACPI_MAX_TABLES] __initdata;
-
-void acpi_table_print(struct acpi_table_header *header, unsigned long phys_addr)
-{
- char *name = NULL;
-
- if (!header)
- return;
-
- /* Some table signatures aren't good table names */
-
- if (!strncmp((char *)&header->signature,
- acpi_table_signatures[ACPI_APIC],
- sizeof(header->signature))) {
- name = "MADT";
- } else if (!strncmp((char *)&header->signature,
- acpi_table_signatures[ACPI_FADT],
- sizeof(header->signature))) {
- name = "FADT";
- } else
- name = header->signature;
-
- printk(KERN_DEBUG PREFIX
- "%.4s (v%3.3d %6.6s %8.8s 0x%08x %.4s 0x%08x) @ 0x%p\n", name,
- header->revision, header->oem_id, header->oem_table_id,
- header->oem_revision, header->asl_compiler_id,
- header->asl_compiler_revision, (void *)phys_addr);
-}
-
-void acpi_table_print_madt_entry(acpi_table_entry_header * header)
+void acpi_table_print_madt_entry(struct acpi_subtable_header * header)
{
if (!header)
return;
switch (header->type) {
- case ACPI_MADT_LAPIC:
+ case ACPI_MADT_TYPE_LOCAL_APIC:
{
- struct acpi_table_lapic *p =
- (struct acpi_table_lapic *)header;
+ struct acpi_madt_local_apic *p =
+ (struct acpi_madt_local_apic *)header;
printk(KERN_INFO PREFIX
"LAPIC (acpi_id[0x%02x] lapic_id[0x%02x] %s)\n",
- p->acpi_id, p->id,
- p->flags.enabled ? "enabled" : "disabled");
+ p->processor_id, p->id,
+ (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
}
break;
- case ACPI_MADT_IOAPIC:
+ case ACPI_MADT_TYPE_IO_APIC:
{
- struct acpi_table_ioapic *p =
- (struct acpi_table_ioapic *)header;
+ struct acpi_madt_io_apic *p =
+ (struct acpi_madt_io_apic *)header;
printk(KERN_INFO PREFIX
"IOAPIC (id[0x%02x] address[0x%08x] gsi_base[%d])\n",
p->id, p->address, p->global_irq_base);
}
break;
- case ACPI_MADT_INT_SRC_OVR:
+ case ACPI_MADT_TYPE_INTERRUPT_OVERRIDE:
{
- struct acpi_table_int_src_ovr *p =
- (struct acpi_table_int_src_ovr *)header;
+ struct acpi_madt_interrupt_override *p =
+ (struct acpi_madt_interrupt_override *)header;
printk(KERN_INFO PREFIX
"INT_SRC_OVR (bus %d bus_irq %d global_irq %d %s %s)\n",
- p->bus, p->bus_irq, p->global_irq,
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger]);
- if (p->flags.reserved)
+ p->bus, p->source_irq, p->global_irq,
+ mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
+ mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2]);
+ if (p->inti_flags &
+ ~(ACPI_MADT_POLARITY_MASK | ACPI_MADT_TRIGGER_MASK))
printk(KERN_INFO PREFIX
"INT_SRC_OVR unexpected reserved flags: 0x%x\n",
- p->flags.reserved);
+ p->inti_flags &
+ ~(ACPI_MADT_POLARITY_MASK | ACPI_MADT_TRIGGER_MASK));
}
break;
- case ACPI_MADT_NMI_SRC:
+ case ACPI_MADT_TYPE_NMI_SOURCE:
{
- struct acpi_table_nmi_src *p =
- (struct acpi_table_nmi_src *)header;
+ struct acpi_madt_nmi_source *p =
+ (struct acpi_madt_nmi_source *)header;
printk(KERN_INFO PREFIX
"NMI_SRC (%s %s global_irq %d)\n",
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger],
+ mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
+ mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
p->global_irq);
}
break;
- case ACPI_MADT_LAPIC_NMI:
+ case ACPI_MADT_TYPE_LOCAL_APIC_NMI:
{
- struct acpi_table_lapic_nmi *p =
- (struct acpi_table_lapic_nmi *)header;
+ struct acpi_madt_local_apic_nmi *p =
+ (struct acpi_madt_local_apic_nmi *)header;
printk(KERN_INFO PREFIX
"LAPIC_NMI (acpi_id[0x%02x] %s %s lint[0x%x])\n",
- p->acpi_id,
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger],
+ p->processor_id,
+ mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK ],
+ mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
p->lint);
}
break;
- case ACPI_MADT_LAPIC_ADDR_OVR:
+ case ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE:
{
- struct acpi_table_lapic_addr_ovr *p =
- (struct acpi_table_lapic_addr_ovr *)header;
+ struct acpi_madt_local_apic_override *p =
+ (struct acpi_madt_local_apic_override *)header;
printk(KERN_INFO PREFIX
"LAPIC_ADDR_OVR (address[%p])\n",
(void *)(unsigned long)p->address);
}
break;
- case ACPI_MADT_IOSAPIC:
+ case ACPI_MADT_TYPE_IO_SAPIC:
{
- struct acpi_table_iosapic *p =
- (struct acpi_table_iosapic *)header;
+ struct acpi_madt_io_sapic *p =
+ (struct acpi_madt_io_sapic *)header;
printk(KERN_INFO PREFIX
"IOSAPIC (id[0x%x] address[%p] gsi_base[%d])\n",
p->id, (void *)(unsigned long)p->address,
}
break;
- case ACPI_MADT_LSAPIC:
+ case ACPI_MADT_TYPE_LOCAL_SAPIC:
{
- struct acpi_table_lsapic *p =
- (struct acpi_table_lsapic *)header;
+ struct acpi_madt_local_sapic *p =
+ (struct acpi_madt_local_sapic *)header;
printk(KERN_INFO PREFIX
"LSAPIC (acpi_id[0x%02x] lsapic_id[0x%02x] lsapic_eid[0x%02x] %s)\n",
- p->acpi_id, p->id, p->eid,
- p->flags.enabled ? "enabled" : "disabled");
+ p->processor_id, p->id, p->eid,
+ (p->lapic_flags & ACPI_MADT_ENABLED) ? "enabled" : "disabled");
}
break;
- case ACPI_MADT_PLAT_INT_SRC:
+ case ACPI_MADT_TYPE_INTERRUPT_SOURCE:
{
- struct acpi_table_plat_int_src *p =
- (struct acpi_table_plat_int_src *)header;
+ struct acpi_madt_interrupt_source *p =
+ (struct acpi_madt_interrupt_source *)header;
printk(KERN_INFO PREFIX
"PLAT_INT_SRC (%s %s type[0x%x] id[0x%04x] eid[0x%x] iosapic_vector[0x%x] global_irq[0x%x]\n",
- mps_inti_flags_polarity[p->flags.polarity],
- mps_inti_flags_trigger[p->flags.trigger],
- p->type, p->id, p->eid, p->iosapic_vector,
+ mps_inti_flags_polarity[p->inti_flags & ACPI_MADT_POLARITY_MASK],
+ mps_inti_flags_trigger[(p->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2],
+ p->type, p->id, p->eid, p->io_sapic_vector,
p->global_irq);
}
break;
}
}
-static int
-acpi_table_compute_checksum(void *table_pointer, unsigned long length)
-{
- u8 *p = table_pointer;
- unsigned long remains = length;
- unsigned long sum = 0;
-
- if (!p || !length)
- return -EINVAL;
-
- while (remains--)
- sum += *p++;
-
- return (sum & 0xFF);
-}
-/*
- * acpi_get_table_header_early()
- * for acpi_blacklisted(), acpi_table_get_sdt()
- */
int __init
-acpi_get_table_header_early(enum acpi_table_id id,
- struct acpi_table_header **header)
-{
- unsigned int i;
- enum acpi_table_id temp_id;
-
- /* DSDT is different from the rest */
- if (id == ACPI_DSDT)
- temp_id = ACPI_FADT;
- else
- temp_id = id;
-
- /* Locate the table. */
-
- for (i = 0; i < sdt_count; i++) {
- if (sdt_entry[i].id != temp_id)
- continue;
- *header = (void *)
- __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
- if (!*header) {
- printk(KERN_WARNING PREFIX "Unable to map %s\n",
- acpi_table_signatures[temp_id]);
- return -ENODEV;
- }
- break;
- }
-
- if (!*header) {
- printk(KERN_WARNING PREFIX "%s not present\n",
- acpi_table_signatures[id]);
- return -ENODEV;
- }
-
- /* Map the DSDT header via the pointer in the FADT */
- if (id == ACPI_DSDT) {
- struct fadt_descriptor *fadt =
- (struct fadt_descriptor *)*header;
-
- if (fadt->revision == 3 && fadt->Xdsdt) {
- *header = (void *)__acpi_map_table(fadt->Xdsdt,
- sizeof(struct
- acpi_table_header));
- } else if (fadt->V1_dsdt) {
- *header = (void *)__acpi_map_table(fadt->V1_dsdt,
- sizeof(struct
- acpi_table_header));
- } else
- *header = NULL;
-
- if (!*header) {
- printk(KERN_WARNING PREFIX "Unable to map DSDT\n");
- return -ENODEV;
- }
- }
-
- return 0;
-}
-
-int __init
-acpi_table_parse_madt_family(enum acpi_table_id id,
+acpi_table_parse_madt_family(char *id,
unsigned long madt_size,
int entry_id,
acpi_madt_entry_handler handler,
unsigned int max_entries)
{
- void *madt = NULL;
- acpi_table_entry_header *entry;
+ struct acpi_table_header *madt = NULL;
+ struct acpi_subtable_header *entry;
unsigned int count = 0;
unsigned long madt_end;
- unsigned int i;
if (!handler)
return -EINVAL;
/* Locate the MADT (if exists). There should only be one. */
-
- for (i = 0; i < sdt_count; i++) {
- if (sdt_entry[i].id != id)
- continue;
- madt = (void *)
- __acpi_map_table(sdt_entry[i].pa, sdt_entry[i].size);
- if (!madt) {
- printk(KERN_WARNING PREFIX "Unable to map %s\n",
- acpi_table_signatures[id]);
- return -ENODEV;
- }
- break;
- }
+ acpi_get_table(id, 0, &madt);
if (!madt) {
- printk(KERN_WARNING PREFIX "%s not present\n",
- acpi_table_signatures[id]);
+ printk(KERN_WARNING PREFIX "%4.4s not present\n", id);
return -ENODEV;
}
- madt_end = (unsigned long)madt + sdt_entry[i].size;
+ madt_end = (unsigned long)madt + madt->length;
/* Parse all entries looking for a match. */
- entry = (acpi_table_entry_header *)
+ entry = (struct acpi_subtable_header *)
((unsigned long)madt + madt_size);
- while (((unsigned long)entry) + sizeof(acpi_table_entry_header) <
+ while (((unsigned long)entry) + sizeof(struct acpi_subtable_header) <
madt_end) {
if (entry->type == entry_id
&& (!max_entries || count++ < max_entries))
if (handler(entry, madt_end))
return -EINVAL;
- entry = (acpi_table_entry_header *)
+ entry = (struct acpi_subtable_header *)
((unsigned long)entry + entry->length);
}
if (max_entries && count > max_entries) {
- printk(KERN_WARNING PREFIX "[%s:0x%02x] ignored %i entries of "
- "%i found\n", acpi_table_signatures[id], entry_id,
- count - max_entries, count);
+ printk(KERN_WARNING PREFIX "[%4.4s:0x%02x] ignored %i entries of "
+ "%i found\n", id, entry_id, count - max_entries, count);
}
return count;
}
int __init
-acpi_table_parse_madt(enum acpi_madt_entry_id id,
+acpi_table_parse_madt(enum acpi_madt_type id,
acpi_madt_entry_handler handler, unsigned int max_entries)
{
- return acpi_table_parse_madt_family(ACPI_APIC,
+ return acpi_table_parse_madt_family(ACPI_SIG_MADT,
sizeof(struct acpi_table_madt), id,
handler, max_entries);
}
-int __init acpi_table_parse(enum acpi_table_id id, acpi_table_handler handler)
+int __init acpi_table_parse(char *id, acpi_table_handler handler)
{
- int count = 0;
- unsigned int i = 0;
-
+ struct acpi_table_header *table = NULL;
if (!handler)
return -EINVAL;
- for (i = 0; i < sdt_count; i++) {
- if (sdt_entry[i].id != id)
- continue;
- count++;
- if (count == 1)
- handler(sdt_entry[i].pa, sdt_entry[i].size);
-
- else
- printk(KERN_WARNING PREFIX
- "%d duplicate %s table ignored.\n", count,
- acpi_table_signatures[id]);
- }
-
- return count;
-}
-
-static int __init acpi_table_get_sdt(struct acpi_table_rsdp *rsdp)
-{
- struct acpi_table_header *header = NULL;
- unsigned int i, id = 0;
-
- if (!rsdp)
- return -EINVAL;
-
- /* First check XSDT (but only on ACPI 2.0-compatible systems) */
-
- if ((rsdp->revision >= 2) &&
- (((struct acpi20_table_rsdp *)rsdp)->xsdt_address)) {
-
- struct acpi_table_xsdt *mapped_xsdt = NULL;
-
- sdt_pa = ((struct acpi20_table_rsdp *)rsdp)->xsdt_address;
-
- /* map in just the header */
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt_pa, sizeof(struct acpi_table_header));
-
- if (!header) {
- printk(KERN_WARNING PREFIX
- "Unable to map XSDT header\n");
- return -ENODEV;
- }
-
- /* remap in the entire table before processing */
- mapped_xsdt = (struct acpi_table_xsdt *)
- __acpi_map_table(sdt_pa, header->length);
- if (!mapped_xsdt) {
- printk(KERN_WARNING PREFIX "Unable to map XSDT\n");
- return -ENODEV;
- }
- header = &mapped_xsdt->header;
-
- if (strncmp(header->signature, "XSDT", 4)) {
- printk(KERN_WARNING PREFIX
- "XSDT signature incorrect\n");
- return -ENODEV;
- }
-
- if (acpi_table_compute_checksum(header, header->length)) {
- printk(KERN_WARNING PREFIX "Invalid XSDT checksum\n");
- return -ENODEV;
- }
-
- sdt_count =
- (header->length - sizeof(struct acpi_table_header)) >> 3;
- if (sdt_count > ACPI_MAX_TABLES) {
- printk(KERN_WARNING PREFIX
- "Truncated %lu XSDT entries\n",
- (sdt_count - ACPI_MAX_TABLES));
- sdt_count = ACPI_MAX_TABLES;
- }
-
- for (i = 0; i < sdt_count; i++)
- sdt_entry[i].pa = (unsigned long)mapped_xsdt->entry[i];
- }
-
- /* Then check RSDT */
-
- else if (rsdp->rsdt_address) {
-
- struct acpi_table_rsdt *mapped_rsdt = NULL;
-
- sdt_pa = rsdp->rsdt_address;
-
- /* map in just the header */
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt_pa, sizeof(struct acpi_table_header));
- if (!header) {
- printk(KERN_WARNING PREFIX
- "Unable to map RSDT header\n");
- return -ENODEV;
- }
-
- /* remap in the entire table before processing */
- mapped_rsdt = (struct acpi_table_rsdt *)
- __acpi_map_table(sdt_pa, header->length);
- if (!mapped_rsdt) {
- printk(KERN_WARNING PREFIX "Unable to map RSDT\n");
- return -ENODEV;
- }
- header = &mapped_rsdt->header;
-
- if (strncmp(header->signature, "RSDT", 4)) {
- printk(KERN_WARNING PREFIX
- "RSDT signature incorrect\n");
- return -ENODEV;
- }
-
- if (acpi_table_compute_checksum(header, header->length)) {
- printk(KERN_WARNING PREFIX "Invalid RSDT checksum\n");
- return -ENODEV;
- }
-
- sdt_count =
- (header->length - sizeof(struct acpi_table_header)) >> 2;
- if (sdt_count > ACPI_MAX_TABLES) {
- printk(KERN_WARNING PREFIX
- "Truncated %lu RSDT entries\n",
- (sdt_count - ACPI_MAX_TABLES));
- sdt_count = ACPI_MAX_TABLES;
- }
-
- for (i = 0; i < sdt_count; i++)
- sdt_entry[i].pa = (unsigned long)mapped_rsdt->entry[i];
- }
-
- else {
- printk(KERN_WARNING PREFIX
- "No System Description Table (RSDT/XSDT) specified in RSDP\n");
- return -ENODEV;
- }
-
- acpi_table_print(header, sdt_pa);
-
- for (i = 0; i < sdt_count; i++) {
-
- /* map in just the header */
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt_entry[i].pa,
- sizeof(struct acpi_table_header));
- if (!header)
- continue;
-
- /* remap in the entire table before processing */
- header = (struct acpi_table_header *)
- __acpi_map_table(sdt_entry[i].pa, header->length);
- if (!header)
- continue;
-
- acpi_table_print(header, sdt_entry[i].pa);
-
- if (acpi_table_compute_checksum(header, header->length)) {
- printk(KERN_WARNING " >>> ERROR: Invalid checksum\n");
- continue;
- }
-
- sdt_entry[i].size = header->length;
-
- for (id = 0; id < ACPI_TABLE_COUNT; id++) {
- if (!strncmp((char *)&header->signature,
- acpi_table_signatures[id],
- sizeof(header->signature))) {
- sdt_entry[i].id = id;
- }
- }
- }
-
- /*
- * The DSDT is *not* in the RSDT (why not? no idea.) but we want
- * to print its info, because this is what people usually blacklist
- * against. Unfortunately, we don't know the phys_addr, so just
- * print 0. Maybe no one will notice.
- */
- if (!acpi_get_table_header_early(ACPI_DSDT, &header))
- acpi_table_print(header, 0);
-
- return 0;
+ acpi_get_table(id, 0, &table);
+ if (table) {
+ handler(table);
+ return 1;
+ } else
+ return 0;
}
/*
*
* find RSDP, find and checksum SDT/XSDT.
* checksum all tables, print SDT/XSDT
- *
+ *
* result: sdt_entry[] is initialized
*/
+
int __init acpi_table_init(void)
{
- struct acpi_table_rsdp *rsdp = NULL;
- unsigned long rsdp_phys = 0;
- int result = 0;
-
- /* Locate and map the Root System Description Table (RSDP) */
-
- rsdp_phys = acpi_find_rsdp();
- if (!rsdp_phys) {
- printk(KERN_ERR PREFIX "Unable to locate RSDP\n");
- return -ENODEV;
- }
-
- rsdp = (struct acpi_table_rsdp *)__acpi_map_table(rsdp_phys,
- sizeof(struct acpi_table_rsdp));
- if (!rsdp) {
- printk(KERN_WARNING PREFIX "Unable to map RSDP\n");
- return -ENODEV;
- }
-
- printk(KERN_DEBUG PREFIX
- "RSDP (v%3.3d %6.6s ) @ 0x%p\n",
- rsdp->revision, rsdp->oem_id, (void *)rsdp_phys);
-
- if (rsdp->revision < 2)
- result =
- acpi_table_compute_checksum(rsdp,
- sizeof(struct acpi_table_rsdp));
- else
- result =
- acpi_table_compute_checksum(rsdp,
- ((struct acpi20_table_rsdp *)
- rsdp)->length);
-
- if (result) {
- printk(KERN_WARNING " >>> ERROR: Invalid checksum\n");
- return -ENODEV;
- }
-
- /* Locate and map the System Description table (RSDT/XSDT) */
-
- if (acpi_table_get_sdt(rsdp))
- return -ENODEV;
-
+ acpi_initialize_tables(initial_tables, ACPI_MAX_TABLES, 0);
return 0;
}
# Makefile for all Linux ACPI interpreter subdirectories
#
-obj-y := tbconvrt.o tbget.o tbrsdt.o tbxface.o \
- tbgetall.o tbinstal.o tbutils.o tbxfroot.o
+obj-y := tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o
EXTRA_CFLAGS += $(ACPI_CFLAGS)
+++ /dev/null
-/******************************************************************************
- *
- * Module Name: tbconvrt - ACPI Table conversion utilities
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT ACPI_TABLES
-ACPI_MODULE_NAME("tbconvrt")
-
-/* Local prototypes */
-static void
-acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
- u8 register_bit_width,
- acpi_physical_address address);
-
-static void
-acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt,
- struct fadt_descriptor_rev1 *original_fadt);
-
-static void
-acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt,
- struct fadt_descriptor *original_fadt);
-
-u8 acpi_fadt_is_v1;
-ACPI_EXPORT_SYMBOL(acpi_fadt_is_v1)
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table_count
- *
- * PARAMETERS: RSDP - Pointer to the RSDP
- * RSDT - Pointer to the RSDT/XSDT
- *
- * RETURN: The number of tables pointed to by the RSDT or XSDT.
- *
- * DESCRIPTION: Calculate the number of tables. Automatically handles either
- * an RSDT or XSDT.
- *
- ******************************************************************************/
-
-u32
-acpi_tb_get_table_count(struct rsdp_descriptor *RSDP,
- struct acpi_table_header *RSDT)
-{
- u32 pointer_size;
-
- ACPI_FUNCTION_ENTRY();
-
- /* RSDT pointers are 32 bits, XSDT pointers are 64 bits */
-
- if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- pointer_size = sizeof(u32);
- } else {
- pointer_size = sizeof(u64);
- }
-
- /*
- * Determine the number of tables pointed to by the RSDT/XSDT.
- * This is defined by the ACPI Specification to be the number of
- * pointers contained within the RSDT/XSDT. The size of the pointers
- * is architecture-dependent.
- */
- return ((RSDT->length -
- sizeof(struct acpi_table_header)) / pointer_size);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_convert_to_xsdt
- *
- * PARAMETERS: table_info - Info about the RSDT
- *
- * RETURN: Status
- *
- * DESCRIPTION: Convert an RSDT to an XSDT (internal common format)
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_convert_to_xsdt(struct acpi_table_desc *table_info)
-{
- acpi_size table_size;
- u32 i;
- struct xsdt_descriptor *new_table;
-
- ACPI_FUNCTION_ENTRY();
-
- /* Compute size of the converted XSDT */
-
- table_size = ((acpi_size) acpi_gbl_rsdt_table_count * sizeof(u64)) +
- sizeof(struct acpi_table_header);
-
- /* Allocate an XSDT */
-
- new_table = ACPI_ALLOCATE_ZEROED(table_size);
- if (!new_table) {
- return (AE_NO_MEMORY);
- }
-
- /* Copy the header and set the length */
-
- ACPI_MEMCPY(new_table, table_info->pointer,
- sizeof(struct acpi_table_header));
- new_table->length = (u32) table_size;
-
- /* Copy the table pointers */
-
- for (i = 0; i < acpi_gbl_rsdt_table_count; i++) {
-
- /* RSDT pointers are 32 bits, XSDT pointers are 64 bits */
-
- if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- ACPI_STORE_ADDRESS(new_table->table_offset_entry[i],
- (ACPI_CAST_PTR
- (struct rsdt_descriptor,
- table_info->pointer))->
- table_offset_entry[i]);
- } else {
- new_table->table_offset_entry[i] =
- (ACPI_CAST_PTR(struct xsdt_descriptor,
- table_info->pointer))->
- table_offset_entry[i];
- }
- }
-
- /* Delete the original table (either mapped or in a buffer) */
-
- acpi_tb_delete_single_table(table_info);
-
- /* Point the table descriptor to the new table */
-
- table_info->pointer =
- ACPI_CAST_PTR(struct acpi_table_header, new_table);
- table_info->length = table_size;
- table_info->allocation = ACPI_MEM_ALLOCATED;
-
- return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_init_generic_address
- *
- * PARAMETERS: new_gas_struct - GAS struct to be initialized
- * register_bit_width - Width of this register
- * Address - Address of the register
- *
- * RETURN: None
- *
- * DESCRIPTION: Initialize a GAS structure.
- *
- ******************************************************************************/
-
-static void
-acpi_tb_init_generic_address(struct acpi_generic_address *new_gas_struct,
- u8 register_bit_width,
- acpi_physical_address address)
-{
-
- ACPI_STORE_ADDRESS(new_gas_struct->address, address);
-
- new_gas_struct->address_space_id = ACPI_ADR_SPACE_SYSTEM_IO;
- new_gas_struct->register_bit_width = register_bit_width;
- new_gas_struct->register_bit_offset = 0;
- new_gas_struct->access_width = 0;
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_convert_fadt1
- *
- * PARAMETERS: local_fadt - Pointer to new FADT
- * original_fadt - Pointer to old FADT
- *
- * RETURN: None, populates local_fadt
- *
- * DESCRIPTION: Convert an ACPI 1.0 FADT to common internal format
- *
- ******************************************************************************/
-
-static void
-acpi_tb_convert_fadt1(struct fadt_descriptor *local_fadt,
- struct fadt_descriptor_rev1 *original_fadt)
-{
-
- /* ACPI 1.0 FACS */
- /* The BIOS stored FADT should agree with Revision 1.0 */
- acpi_fadt_is_v1 = 1;
-
- /*
- * Copy the table header and the common part of the tables.
- *
- * The 2.0 table is an extension of the 1.0 table, so the entire 1.0
- * table can be copied first, then expand some fields to 64 bits.
- */
- ACPI_MEMCPY(local_fadt, original_fadt,
- sizeof(struct fadt_descriptor_rev1));
-
- /* Convert table pointers to 64-bit fields */
-
- ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl,
- local_fadt->V1_firmware_ctrl);
- ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt);
-
- /*
- * System Interrupt Model isn't used in ACPI 2.0
- * (local_fadt->Reserved1 = 0;)
- */
-
- /*
- * This field is set by the OEM to convey the preferred power management
- * profile to OSPM. It doesn't have any 1.0 equivalence. Since we don't
- * know what kind of 32-bit system this is, we will use "unspecified".
- */
- local_fadt->prefer_PM_profile = PM_UNSPECIFIED;
-
- /*
- * Processor Performance State Control. This is the value OSPM writes to
- * the SMI_CMD register to assume processor performance state control
- * responsibility. There isn't any equivalence in 1.0, but as many 1.x
- * ACPI tables contain _PCT and _PSS we also keep this value, unless
- * acpi_strict is set.
- */
- if (acpi_strict)
- local_fadt->pstate_cnt = 0;
-
- /*
- * Support for the _CST object and C States change notification.
- * This data item hasn't any 1.0 equivalence so leave it zero.
- */
- local_fadt->cst_cnt = 0;
-
- /*
- * FADT Rev 2 was an interim FADT released between ACPI 1.0 and ACPI 2.0.
- * It primarily adds the FADT reset mechanism.
- */
- if ((original_fadt->revision == 2) &&
- (original_fadt->length ==
- sizeof(struct fadt_descriptor_rev2_minus))) {
- /*
- * Grab the entire generic address struct, plus the 1-byte reset value
- * that immediately follows.
- */
- ACPI_MEMCPY(&local_fadt->reset_register,
- &(ACPI_CAST_PTR(struct fadt_descriptor_rev2_minus,
- original_fadt))->reset_register,
- sizeof(struct acpi_generic_address) + 1);
- } else {
- /*
- * Since there isn't any equivalence in 1.0 and since it is highly
- * likely that a 1.0 system has legacy support.
- */
- local_fadt->iapc_boot_arch = BAF_LEGACY_DEVICES;
- }
-
- /*
- * Convert the V1.0 block addresses to V2.0 GAS structures
- */
- acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk,
- local_fadt->pm1_evt_len,
- (acpi_physical_address) local_fadt->
- V1_pm1a_evt_blk);
- acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk,
- local_fadt->pm1_evt_len,
- (acpi_physical_address) local_fadt->
- V1_pm1b_evt_blk);
- acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk,
- local_fadt->pm1_cnt_len,
- (acpi_physical_address) local_fadt->
- V1_pm1a_cnt_blk);
- acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk,
- local_fadt->pm1_cnt_len,
- (acpi_physical_address) local_fadt->
- V1_pm1b_cnt_blk);
- acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk,
- local_fadt->pm2_cnt_len,
- (acpi_physical_address) local_fadt->
- V1_pm2_cnt_blk);
- acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk,
- local_fadt->pm_tm_len,
- (acpi_physical_address) local_fadt->
- V1_pm_tmr_blk);
- acpi_tb_init_generic_address(&local_fadt->xgpe0_blk, 0,
- (acpi_physical_address) local_fadt->
- V1_gpe0_blk);
- acpi_tb_init_generic_address(&local_fadt->xgpe1_blk, 0,
- (acpi_physical_address) local_fadt->
- V1_gpe1_blk);
-
- /* Create separate GAS structs for the PM1 Enable registers */
-
- acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
- (u8) ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len),
- (acpi_physical_address)
- (local_fadt->xpm1a_evt_blk.address +
- ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len)));
-
- /* PM1B is optional; leave null if not present */
-
- if (local_fadt->xpm1b_evt_blk.address) {
- acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
- (u8) ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len),
- (acpi_physical_address)
- (local_fadt->xpm1b_evt_blk.
- address +
- ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len)));
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_convert_fadt2
- *
- * PARAMETERS: local_fadt - Pointer to new FADT
- * original_fadt - Pointer to old FADT
- *
- * RETURN: None, populates local_fadt
- *
- * DESCRIPTION: Convert an ACPI 2.0 FADT to common internal format.
- * Handles optional "X" fields.
- *
- ******************************************************************************/
-
-static void
-acpi_tb_convert_fadt2(struct fadt_descriptor *local_fadt,
- struct fadt_descriptor *original_fadt)
-{
-
- /* We have an ACPI 2.0 FADT but we must copy it to our local buffer */
-
- ACPI_MEMCPY(local_fadt, original_fadt, sizeof(struct fadt_descriptor));
-
- /*
- * "X" fields are optional extensions to the original V1.0 fields, so
- * we must selectively expand V1.0 fields if the corresponding X field
- * is zero.
- */
- if (!(local_fadt->xfirmware_ctrl)) {
- ACPI_STORE_ADDRESS(local_fadt->xfirmware_ctrl,
- local_fadt->V1_firmware_ctrl);
- }
-
- if (!(local_fadt->Xdsdt)) {
- ACPI_STORE_ADDRESS(local_fadt->Xdsdt, local_fadt->V1_dsdt);
- }
-
- if (!(local_fadt->xpm1a_evt_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm1a_evt_blk,
- local_fadt->pm1_evt_len,
- (acpi_physical_address)
- local_fadt->V1_pm1a_evt_blk);
- }
-
- if (!(local_fadt->xpm1b_evt_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm1b_evt_blk,
- local_fadt->pm1_evt_len,
- (acpi_physical_address)
- local_fadt->V1_pm1b_evt_blk);
- }
-
- if (!(local_fadt->xpm1a_cnt_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm1a_cnt_blk,
- local_fadt->pm1_cnt_len,
- (acpi_physical_address)
- local_fadt->V1_pm1a_cnt_blk);
- }
-
- if (!(local_fadt->xpm1b_cnt_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm1b_cnt_blk,
- local_fadt->pm1_cnt_len,
- (acpi_physical_address)
- local_fadt->V1_pm1b_cnt_blk);
- }
-
- if (!(local_fadt->xpm2_cnt_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm2_cnt_blk,
- local_fadt->pm2_cnt_len,
- (acpi_physical_address)
- local_fadt->V1_pm2_cnt_blk);
- }
-
- if (!(local_fadt->xpm_tmr_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xpm_tmr_blk,
- local_fadt->pm_tm_len,
- (acpi_physical_address)
- local_fadt->V1_pm_tmr_blk);
- }
-
- if (!(local_fadt->xgpe0_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xgpe0_blk,
- 0,
- (acpi_physical_address)
- local_fadt->V1_gpe0_blk);
- }
-
- if (!(local_fadt->xgpe1_blk.address)) {
- acpi_tb_init_generic_address(&local_fadt->xgpe1_blk,
- 0,
- (acpi_physical_address)
- local_fadt->V1_gpe1_blk);
- }
-
- /* Create separate GAS structs for the PM1 Enable registers */
-
- acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
- (u8) ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len),
- (acpi_physical_address)
- (local_fadt->xpm1a_evt_blk.address +
- ACPI_DIV_2(acpi_gbl_FADT->pm1_evt_len)));
-
- acpi_gbl_xpm1a_enable.address_space_id =
- local_fadt->xpm1a_evt_blk.address_space_id;
-
- /* PM1B is optional; leave null if not present */
-
- if (local_fadt->xpm1b_evt_blk.address) {
- acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
- (u8) ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len),
- (acpi_physical_address)
- (local_fadt->xpm1b_evt_blk.
- address +
- ACPI_DIV_2(acpi_gbl_FADT->
- pm1_evt_len)));
-
- acpi_gbl_xpm1b_enable.address_space_id =
- local_fadt->xpm1b_evt_blk.address_space_id;
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_convert_table_fadt
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Converts a BIOS supplied ACPI 1.0 FADT to a local
- * ACPI 2.0 FADT. If the BIOS supplied a 2.0 FADT then it is simply
- * copied to the local FADT. The ACPI CA software uses this
- * local FADT. Thus a significant amount of special #ifdef
- * type codeing is saved.
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_convert_table_fadt(void)
-{
- struct fadt_descriptor *local_fadt;
- struct acpi_table_desc *table_desc;
-
- ACPI_FUNCTION_TRACE(tb_convert_table_fadt);
-
- /*
- * acpi_gbl_FADT is valid. Validate the FADT length. The table must be
- * at least as long as the version 1.0 FADT
- */
- if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor_rev1)) {
- ACPI_ERROR((AE_INFO, "FADT is invalid, too short: 0x%X",
- acpi_gbl_FADT->length));
- return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
- }
-
- /* Allocate buffer for the ACPI 2.0(+) FADT */
-
- local_fadt = ACPI_ALLOCATE_ZEROED(sizeof(struct fadt_descriptor));
- if (!local_fadt) {
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- if (acpi_gbl_FADT->revision >= FADT2_REVISION_ID) {
- if (acpi_gbl_FADT->length < sizeof(struct fadt_descriptor)) {
-
- /* Length is too short to be a V2.0 table */
-
- ACPI_WARNING((AE_INFO,
- "Inconsistent FADT length (0x%X) and revision (0x%X), using FADT V1.0 portion of table",
- acpi_gbl_FADT->length,
- acpi_gbl_FADT->revision));
-
- acpi_tb_convert_fadt1(local_fadt,
- (void *)acpi_gbl_FADT);
- } else {
- /* Valid V2.0 table */
-
- acpi_tb_convert_fadt2(local_fadt, acpi_gbl_FADT);
- }
- } else {
- /* Valid V1.0 table */
-
- acpi_tb_convert_fadt1(local_fadt, (void *)acpi_gbl_FADT);
- }
-
- /* Global FADT pointer will point to the new common V2.0 FADT */
-
- acpi_gbl_FADT = local_fadt;
- acpi_gbl_FADT->length = sizeof(struct fadt_descriptor);
-
- /* Free the original table */
-
- table_desc = acpi_gbl_table_lists[ACPI_TABLE_ID_FADT].next;
- acpi_tb_delete_single_table(table_desc);
-
- /* Install the new table */
-
- table_desc->pointer =
- ACPI_CAST_PTR(struct acpi_table_header, acpi_gbl_FADT);
- table_desc->allocation = ACPI_MEM_ALLOCATED;
- table_desc->length = sizeof(struct fadt_descriptor);
-
- /* Dump the entire FADT */
-
- ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
- "Hex dump of common internal FADT, size %d (%X)\n",
- acpi_gbl_FADT->length, acpi_gbl_FADT->length));
-
- ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_FADT),
- acpi_gbl_FADT->length);
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_build_common_facs
- *
- * PARAMETERS: table_info - Info for currently installed FACS
- *
- * RETURN: Status
- *
- * DESCRIPTION: Convert ACPI 1.0 and ACPI 2.0 FACS to a common internal
- * table format.
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_build_common_facs(struct acpi_table_desc *table_info)
-{
-
- ACPI_FUNCTION_TRACE(tb_build_common_facs);
-
- /* Absolute minimum length is 24, but the ACPI spec says 64 */
-
- if (acpi_gbl_FACS->length < 24) {
- ACPI_ERROR((AE_INFO, "Invalid FACS table length: 0x%X",
- acpi_gbl_FACS->length));
- return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
- }
-
- if (acpi_gbl_FACS->length < 64) {
- ACPI_WARNING((AE_INFO,
- "FACS is shorter than the ACPI specification allows: 0x%X, using anyway",
- acpi_gbl_FACS->length));
- }
-
- /* Copy fields to the new FACS */
-
- acpi_gbl_common_fACS.global_lock = &(acpi_gbl_FACS->global_lock);
-
- if ((acpi_gbl_RSDP->revision < 2) ||
- (acpi_gbl_FACS->length < 32) ||
- (!(acpi_gbl_FACS->xfirmware_waking_vector))) {
-
- /* ACPI 1.0 FACS or short table or optional X_ field is zero */
-
- acpi_gbl_common_fACS.firmware_waking_vector = ACPI_CAST_PTR(u64,
- &
- (acpi_gbl_FACS->
- firmware_waking_vector));
- acpi_gbl_common_fACS.vector_width = 32;
- } else {
- /* ACPI 2.0 FACS with valid X_ field */
-
- acpi_gbl_common_fACS.firmware_waking_vector =
- &acpi_gbl_FACS->xfirmware_waking_vector;
- acpi_gbl_common_fACS.vector_width = 64;
- }
-
- return_ACPI_STATUS(AE_OK);
-}
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: tbfadt - FADT table utilities
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2007, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/actables.h>
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbfadt")
+
+/* Local prototypes */
+static void inline
+acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
+ u8 bit_width, u64 address);
+
+static void acpi_tb_convert_fadt(void);
+
+static void acpi_tb_validate_fadt(void);
+
+/* Table for conversion of FADT to common internal format and FADT validation */
+
+typedef struct acpi_fadt_info {
+ char *name;
+ u8 target;
+ u8 source;
+ u8 length;
+ u8 type;
+
+} acpi_fadt_info;
+
+#define ACPI_FADT_REQUIRED 1
+#define ACPI_FADT_SEPARATE_LENGTH 2
+
+static struct acpi_fadt_info fadt_info_table[] = {
+ {"Pm1aEventBlock", ACPI_FADT_OFFSET(xpm1a_event_block),
+ ACPI_FADT_OFFSET(pm1a_event_block),
+ ACPI_FADT_OFFSET(pm1_event_length), ACPI_FADT_REQUIRED},
+
+ {"Pm1bEventBlock", ACPI_FADT_OFFSET(xpm1b_event_block),
+ ACPI_FADT_OFFSET(pm1b_event_block),
+ ACPI_FADT_OFFSET(pm1_event_length), 0},
+
+ {"Pm1aControlBlock", ACPI_FADT_OFFSET(xpm1a_control_block),
+ ACPI_FADT_OFFSET(pm1a_control_block),
+ ACPI_FADT_OFFSET(pm1_control_length), ACPI_FADT_REQUIRED},
+
+ {"Pm1bControlBlock", ACPI_FADT_OFFSET(xpm1b_control_block),
+ ACPI_FADT_OFFSET(pm1b_control_block),
+ ACPI_FADT_OFFSET(pm1_control_length), 0},
+
+ {"Pm2ControlBlock", ACPI_FADT_OFFSET(xpm2_control_block),
+ ACPI_FADT_OFFSET(pm2_control_block),
+ ACPI_FADT_OFFSET(pm2_control_length), ACPI_FADT_SEPARATE_LENGTH},
+
+ {"PmTimerBlock", ACPI_FADT_OFFSET(xpm_timer_block),
+ ACPI_FADT_OFFSET(pm_timer_block),
+ ACPI_FADT_OFFSET(pm_timer_length), ACPI_FADT_REQUIRED},
+
+ {"Gpe0Block", ACPI_FADT_OFFSET(xgpe0_block),
+ ACPI_FADT_OFFSET(gpe0_block),
+ ACPI_FADT_OFFSET(gpe0_block_length), ACPI_FADT_SEPARATE_LENGTH},
+
+ {"Gpe1Block", ACPI_FADT_OFFSET(xgpe1_block),
+ ACPI_FADT_OFFSET(gpe1_block),
+ ACPI_FADT_OFFSET(gpe1_block_length), ACPI_FADT_SEPARATE_LENGTH}
+};
+
+#define ACPI_FADT_INFO_ENTRIES (sizeof (fadt_info_table) / sizeof (struct acpi_fadt_info))
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_init_generic_address
+ *
+ * PARAMETERS: generic_address - GAS struct to be initialized
+ * bit_width - Width of this register
+ * Address - Address of the register
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Initialize a Generic Address Structure (GAS)
+ * See the ACPI specification for a full description and
+ * definition of this structure.
+ *
+ ******************************************************************************/
+
+static void inline
+acpi_tb_init_generic_address(struct acpi_generic_address *generic_address,
+ u8 bit_width, u64 address)
+{
+
+ /*
+ * The 64-bit Address field is non-aligned in the byte packed
+ * GAS struct.
+ */
+ ACPI_MOVE_64_TO_64(&generic_address->address, &address);
+
+ /* All other fields are byte-wide */
+
+ generic_address->space_id = ACPI_ADR_SPACE_SYSTEM_IO;
+ generic_address->bit_width = bit_width;
+ generic_address->bit_offset = 0;
+ generic_address->access_width = 0;
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_parse_fadt
+ *
+ * PARAMETERS: table_index - Index for the FADT
+ * Flags - Flags
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Initialize the FADT, DSDT and FACS tables
+ * (FADT contains the addresses of the DSDT and FACS)
+ *
+ ******************************************************************************/
+
+void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags)
+{
+ u32 length;
+ struct acpi_table_header *table;
+
+ /*
+ * The FADT has multiple versions with different lengths,
+ * and it contains pointers to both the DSDT and FACS tables.
+ *
+ * Get a local copy of the FADT and convert it to a common format
+ * Map entire FADT, assumed to be smaller than one page.
+ */
+ length = acpi_gbl_root_table_list.tables[table_index].length;
+
+ table =
+ acpi_os_map_memory(acpi_gbl_root_table_list.tables[table_index].
+ address, length);
+ if (!table) {
+ return;
+ }
+
+ /*
+ * Validate the FADT checksum before we copy the table. Ignore
+ * checksum error as we want to try to get the DSDT and FACS.
+ */
+ (void)acpi_tb_verify_checksum(table, length);
+
+ /* Obtain a local copy of the FADT in common ACPI 2.0+ format */
+
+ acpi_tb_create_local_fadt(table, length);
+
+ /* All done with the real FADT, unmap it */
+
+ acpi_os_unmap_memory(table, length);
+
+ /* Obtain the DSDT and FACS tables via their addresses within the FADT */
+
+ acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xdsdt,
+ flags, ACPI_SIG_DSDT, ACPI_TABLE_INDEX_DSDT);
+
+ acpi_tb_install_table((acpi_physical_address) acpi_gbl_FADT.Xfacs,
+ flags, ACPI_SIG_FACS, ACPI_TABLE_INDEX_FACS);
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_create_local_fadt
+ *
+ * PARAMETERS: Table - Pointer to BIOS FADT
+ * Length - Length of the table
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Get a local copy of the FADT and convert it to a common format.
+ * Performs validation on some important FADT fields.
+ *
+ ******************************************************************************/
+
+void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
+{
+
+ /*
+ * Check if the FADT is larger than what we know about (ACPI 2.0 version).
+ * Truncate the table, but make some noise.
+ */
+ if (length > sizeof(struct acpi_table_fadt)) {
+ ACPI_WARNING((AE_INFO,
+ "FADT (revision %u) is longer than ACPI 2.0 version, truncating length 0x%X to 0x%zX",
+ table->revision, (unsigned)length,
+ sizeof(struct acpi_table_fadt)));
+ }
+
+ /* Copy the entire FADT locally. Zero first for tb_convert_fadt */
+
+ ACPI_MEMSET(&acpi_gbl_FADT, 0, sizeof(struct acpi_table_fadt));
+
+ ACPI_MEMCPY(&acpi_gbl_FADT, table,
+ ACPI_MIN(length, sizeof(struct acpi_table_fadt)));
+
+ /*
+ * 1) Convert the local copy of the FADT to the common internal format
+ * 2) Validate some of the important values within the FADT
+ */
+ acpi_tb_convert_fadt();
+ acpi_tb_validate_fadt();
+}
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_convert_fadt
+ *
+ * PARAMETERS: None, uses acpi_gbl_FADT
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Converts all versions of the FADT to a common internal format.
+ * -> Expand all 32-bit addresses to 64-bit.
+ *
+ * NOTE: acpi_gbl_FADT must be of size (struct acpi_table_fadt),
+ * and must contain a copy of the actual FADT.
+ *
+ * ACPICA will use the "X" fields of the FADT for all addresses.
+ *
+ * "X" fields are optional extensions to the original V1.0 fields. Even if
+ * they are present in the structure, they can be optionally not used by
+ * setting them to zero. Therefore, we must selectively expand V1.0 fields
+ * if the corresponding X field is zero.
+ *
+ * For ACPI 1.0 FADTs, all address fields are expanded to the corresponding
+ * "X" fields.
+ *
+ * For ACPI 2.0 FADTs, any "X" fields that are NULL are filled in by
+ * expanding the corresponding ACPI 1.0 field.
+ *
+ ******************************************************************************/
+
+static void acpi_tb_convert_fadt(void)
+{
+ u8 pm1_register_length;
+ struct acpi_generic_address *target;
+ acpi_native_uint i;
+
+ /* Update the local FADT table header length */
+
+ acpi_gbl_FADT.header.length = sizeof(struct acpi_table_fadt);
+
+ /* Expand the 32-bit FACS and DSDT addresses to 64-bit as necessary */
+
+ if (!acpi_gbl_FADT.Xfacs) {
+ acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
+ }
+
+ if (!acpi_gbl_FADT.Xdsdt) {
+ acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
+ }
+
+ /*
+ * Expand the 32-bit V1.0 addresses to the 64-bit "X" generic address
+ * structures as necessary.
+ */
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+ target =
+ ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
+ fadt_info_table[i].target);
+
+ /* Expand only if the X target is null */
+
+ if (!target->address) {
+ acpi_tb_init_generic_address(target,
+ *ACPI_ADD_PTR(u8,
+ &acpi_gbl_FADT,
+ fadt_info_table
+ [i].length),
+ (u64) * ACPI_ADD_PTR(u32,
+ &acpi_gbl_FADT,
+ fadt_info_table
+ [i].
+ source));
+ }
+ }
+
+ /*
+ * Calculate separate GAS structs for the PM1 Enable registers.
+ * These addresses do not appear (directly) in the FADT, so it is
+ * useful to calculate them once, here.
+ *
+ * The PM event blocks are split into two register blocks, first is the
+ * PM Status Register block, followed immediately by the PM Enable Register
+ * block. Each is of length (pm1_event_length/2)
+ */
+ pm1_register_length = (u8) ACPI_DIV_2(acpi_gbl_FADT.pm1_event_length);
+
+ /* The PM1A register block is required */
+
+ acpi_tb_init_generic_address(&acpi_gbl_xpm1a_enable,
+ pm1_register_length,
+ (acpi_gbl_FADT.xpm1a_event_block.address +
+ pm1_register_length));
+ /* Don't forget to copy space_id of the GAS */
+ acpi_gbl_xpm1a_enable.space_id = acpi_gbl_FADT.xpm1a_event_block.space_id;
+
+ /* The PM1B register block is optional, ignore if not present */
+
+ if (acpi_gbl_FADT.xpm1b_event_block.address) {
+ acpi_tb_init_generic_address(&acpi_gbl_xpm1b_enable,
+ pm1_register_length,
+ (acpi_gbl_FADT.xpm1b_event_block.
+ address + pm1_register_length));
+ /* Don't forget to copy space_id of the GAS */
+ acpi_gbl_xpm1b_enable.space_id = acpi_gbl_FADT.xpm1a_event_block.space_id;
+
+ }
+}
+
+/******************************************************************************
+ *
+ * FUNCTION: acpi_tb_validate_fadt
+ *
+ * PARAMETERS: Table - Pointer to the FADT to be validated
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Validate various important fields within the FADT. If a problem
+ * is found, issue a message, but no status is returned.
+ * Used by both the table manager and the disassembler.
+ *
+ * Possible additional checks:
+ * (acpi_gbl_FADT.pm1_event_length >= 4)
+ * (acpi_gbl_FADT.pm1_control_length >= 2)
+ * (acpi_gbl_FADT.pm_timer_length >= 4)
+ * Gpe block lengths must be multiple of 2
+ *
+ ******************************************************************************/
+
+static void acpi_tb_validate_fadt(void)
+{
+ u32 *address32;
+ struct acpi_generic_address *address64;
+ u8 length;
+ acpi_native_uint i;
+
+ /* Examine all of the 64-bit extended address fields (X fields) */
+
+ for (i = 0; i < ACPI_FADT_INFO_ENTRIES; i++) {
+
+ /* Generate pointers to the 32-bit and 64-bit addresses and get the length */
+
+ address64 =
+ ACPI_ADD_PTR(struct acpi_generic_address, &acpi_gbl_FADT,
+ fadt_info_table[i].target);
+ address32 =
+ ACPI_ADD_PTR(u32, &acpi_gbl_FADT,
+ fadt_info_table[i].source);
+ length =
+ *ACPI_ADD_PTR(u8, &acpi_gbl_FADT,
+ fadt_info_table[i].length);
+
+ if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
+ /*
+ * Field is required (Pm1a_event, Pm1a_control, pm_timer).
+ * Both the address and length must be non-zero.
+ */
+ if (!address64->address || !length) {
+ ACPI_ERROR((AE_INFO,
+ "Required field \"%s\" has zero address and/or length: %8.8X%8.8X/%X",
+ fadt_info_table[i].name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
+ }
+ } else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
+ /*
+ * Field is optional (PM2Control, GPE0, GPE1) AND has its own
+ * length field. If present, both the address and length must be valid.
+ */
+ if ((address64->address && !length)
+ || (!address64->address && length)) {
+ ACPI_WARNING((AE_INFO,
+ "Optional field \"%s\" has zero address or length: %8.8X%8.8X/%X",
+ fadt_info_table[i].name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
+ }
+ }
+
+ /* If both 32- and 64-bit addresses are valid (non-zero), they must match */
+
+ if (address64->address && *address32 &&
+ (address64->address != (u64) * address32)) {
+ ACPI_ERROR((AE_INFO,
+ "32/64X address mismatch in \"%s\": [%8.8X] [%8.8X%8.8X], using 64X",
+ fadt_info_table[i].name, *address32,
+ ACPI_FORMAT_UINT64(address64->address)));
+ }
+ }
+}
--- /dev/null
+/******************************************************************************
+ *
+ * Module Name: tbfind - find table
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2007, R. Byron Moore
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <acpi/acpi.h>
+#include <acpi/actables.h>
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbfind")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_find_table
+ *
+ * PARAMETERS: Signature - String with ACPI table signature
+ * oem_id - String with the table OEM ID
+ * oem_table_id - String with the OEM Table ID
+ * table_index - Where the table index is returned
+ *
+ * RETURN: Status and table index
+ *
+ * DESCRIPTION: Find an ACPI table (in the RSDT/XSDT) that matches the
+ * Signature, OEM ID and OEM Table ID. Returns an index that can
+ * be used to get the table header or entire table.
+ *
+ ******************************************************************************/
+acpi_status
+acpi_tb_find_table(char *signature,
+ char *oem_id,
+ char *oem_table_id, acpi_native_uint * table_index)
+{
+ acpi_native_uint i;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(tb_find_table);
+
+ for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
+ if (ACPI_MEMCMP(&(acpi_gbl_root_table_list.tables[i].signature),
+ signature, ACPI_NAME_SIZE)) {
+
+ /* Not the requested table */
+
+ continue;
+ }
+
+ /* Table with matching signature has been found */
+
+ if (!acpi_gbl_root_table_list.tables[i].pointer) {
+
+ /* Table is not currently mapped, map it */
+
+ status =
+ acpi_tb_verify_table(&acpi_gbl_root_table_list.
+ tables[i]);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ if (!acpi_gbl_root_table_list.tables[i].pointer) {
+ continue;
+ }
+ }
+
+ /* Check for table match on all IDs */
+
+ if (!ACPI_MEMCMP
+ (acpi_gbl_root_table_list.tables[i].pointer->signature,
+ signature, ACPI_NAME_SIZE) && (!oem_id[0]
+ ||
+ !ACPI_MEMCMP
+ (acpi_gbl_root_table_list.
+ tables[i].pointer->oem_id,
+ oem_id, ACPI_OEM_ID_SIZE))
+ && (!oem_table_id[0]
+ || !ACPI_MEMCMP(acpi_gbl_root_table_list.tables[i].
+ pointer->oem_table_id, oem_table_id,
+ ACPI_OEM_TABLE_ID_SIZE))) {
+ *table_index = i;
+
+ ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
+ "Found table [%4.4s]\n", signature));
+ return_ACPI_STATUS(AE_OK);
+ }
+ }
+
+ return_ACPI_STATUS(AE_NOT_FOUND);
+}
+++ /dev/null
-/******************************************************************************
- *
- * Module Name: tbget - ACPI Table get* routines
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT ACPI_TABLES
-ACPI_MODULE_NAME("tbget")
-
-/* Local prototypes */
-static acpi_status
-acpi_tb_get_this_table(struct acpi_pointer *address,
- struct acpi_table_header *header,
- struct acpi_table_desc *table_info);
-
-static acpi_status
-acpi_tb_table_override(struct acpi_table_header *header,
- struct acpi_table_desc *table_info);
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table
- *
- * PARAMETERS: Address - Address of table to retrieve. Can be
- * Logical or Physical
- * table_info - Where table info is returned
- *
- * RETURN: None
- *
- * DESCRIPTION: Get entire table of unknown size.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_tb_get_table(struct acpi_pointer *address,
- struct acpi_table_desc *table_info)
-{
- acpi_status status;
- struct acpi_table_header header;
-
- ACPI_FUNCTION_TRACE(tb_get_table);
-
- /* Get the header in order to get signature and table size */
-
- status = acpi_tb_get_table_header(address, &header);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get the entire table */
-
- status = acpi_tb_get_table_body(address, &header, table_info);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not get ACPI table (size %X)",
- header.length));
- return_ACPI_STATUS(status);
- }
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table_header
- *
- * PARAMETERS: Address - Address of table to retrieve. Can be
- * Logical or Physical
- * return_header - Where the table header is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Get an ACPI table header. Works in both physical or virtual
- * addressing mode. Works with both physical or logical pointers.
- * Table is either copied or mapped, depending on the pointer
- * type and mode of the processor.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_tb_get_table_header(struct acpi_pointer *address,
- struct acpi_table_header *return_header)
-{
- acpi_status status = AE_OK;
- struct acpi_table_header *header = NULL;
-
- ACPI_FUNCTION_TRACE(tb_get_table_header);
-
- /*
- * Flags contains the current processor mode (Virtual or Physical
- * addressing) The pointer_type is either Logical or Physical
- */
- switch (address->pointer_type) {
- case ACPI_PHYSMODE_PHYSPTR:
- case ACPI_LOGMODE_LOGPTR:
-
- /* Pointer matches processor mode, copy the header */
-
- ACPI_MEMCPY(return_header, address->pointer.logical,
- sizeof(struct acpi_table_header));
- break;
-
- case ACPI_LOGMODE_PHYSPTR:
-
- /* Create a logical address for the physical pointer */
-
- status = acpi_os_map_memory(address->pointer.physical,
- sizeof(struct acpi_table_header),
- (void *)&header);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X%8.8X for table header",
- ACPI_FORMAT_UINT64(address->pointer.
- physical)));
- return_ACPI_STATUS(status);
- }
-
- /* Copy header and delete mapping */
-
- ACPI_MEMCPY(return_header, header,
- sizeof(struct acpi_table_header));
- acpi_os_unmap_memory(header, sizeof(struct acpi_table_header));
- break;
-
- default:
-
- ACPI_ERROR((AE_INFO, "Invalid address flags %X",
- address->pointer_type));
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_TABLES, "Table Signature: [%4.4s]\n",
- return_header->signature));
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table_body
- *
- * PARAMETERS: Address - Address of table to retrieve. Can be
- * Logical or Physical
- * Header - Header of the table to retrieve
- * table_info - Where the table info is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Get an entire ACPI table with support to allow the host OS to
- * replace the table with a newer version (table override.)
- * Works in both physical or virtual
- * addressing mode. Works with both physical or logical pointers.
- * Table is either copied or mapped, depending on the pointer
- * type and mode of the processor.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_tb_get_table_body(struct acpi_pointer *address,
- struct acpi_table_header *header,
- struct acpi_table_desc *table_info)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(tb_get_table_body);
-
- if (!table_info || !address) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Attempt table override. */
-
- status = acpi_tb_table_override(header, table_info);
- if (ACPI_SUCCESS(status)) {
-
- /* Table was overridden by the host OS */
-
- return_ACPI_STATUS(status);
- }
-
- /* No override, get the original table */
-
- status = acpi_tb_get_this_table(address, header, table_info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_table_override
- *
- * PARAMETERS: Header - Pointer to table header
- * table_info - Return info if table is overridden
- *
- * RETURN: None
- *
- * DESCRIPTION: Attempts override of current table with a new one if provided
- * by the host OS.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_table_override(struct acpi_table_header *header,
- struct acpi_table_desc *table_info)
-{
- struct acpi_table_header *new_table;
- acpi_status status;
- struct acpi_pointer address;
-
- ACPI_FUNCTION_TRACE(tb_table_override);
-
- /*
- * The OSL will examine the header and decide whether to override this
- * table. If it decides to override, a table will be returned in new_table,
- * which we will then copy.
- */
- status = acpi_os_table_override(header, &new_table);
- if (ACPI_FAILURE(status)) {
-
- /* Some severe error from the OSL, but we basically ignore it */
-
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not override ACPI table"));
- return_ACPI_STATUS(status);
- }
-
- if (!new_table) {
-
- /* No table override */
-
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
- /*
- * We have a new table to override the old one. Get a copy of
- * the new one. We know that the new table has a logical pointer.
- */
- address.pointer_type = ACPI_LOGICAL_POINTER | ACPI_LOGICAL_ADDRESSING;
- address.pointer.logical = new_table;
-
- status = acpi_tb_get_this_table(&address, new_table, table_info);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Could not copy ACPI table"));
- return_ACPI_STATUS(status);
- }
-
- /* Copy the table info */
-
- ACPI_INFO((AE_INFO, "Table [%4.4s] replaced by host OS",
- table_info->pointer->signature));
-
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_this_table
- *
- * PARAMETERS: Address - Address of table to retrieve. Can be
- * Logical or Physical
- * Header - Header of the table to retrieve
- * table_info - Where the table info is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Get an entire ACPI table. Works in both physical or virtual
- * addressing mode. Works with both physical or logical pointers.
- * Table is either copied or mapped, depending on the pointer
- * type and mode of the processor.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_get_this_table(struct acpi_pointer *address,
- struct acpi_table_header *header,
- struct acpi_table_desc *table_info)
-{
- struct acpi_table_header *full_table = NULL;
- u8 allocation;
- acpi_status status = AE_OK;
-
- ACPI_FUNCTION_TRACE(tb_get_this_table);
-
- /* Validate minimum length */
-
- if (header->length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO,
- "Table length (%X) is smaller than minimum (%zX)",
- header->length, sizeof(struct acpi_table_header)));
-
- return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
- }
-
- /*
- * Flags contains the current processor mode (Virtual or Physical
- * addressing) The pointer_type is either Logical or Physical
- */
- switch (address->pointer_type) {
- case ACPI_PHYSMODE_PHYSPTR:
- case ACPI_LOGMODE_LOGPTR:
-
- /* Pointer matches processor mode, copy the table to a new buffer */
-
- full_table = ACPI_ALLOCATE(header->length);
- if (!full_table) {
- ACPI_ERROR((AE_INFO,
- "Could not allocate table memory for [%4.4s] length %X",
- header->signature, header->length));
- return_ACPI_STATUS(AE_NO_MEMORY);
- }
-
- /* Copy the entire table (including header) to the local buffer */
-
- ACPI_MEMCPY(full_table, address->pointer.logical,
- header->length);
-
- /* Save allocation type */
-
- allocation = ACPI_MEM_ALLOCATED;
- break;
-
- case ACPI_LOGMODE_PHYSPTR:
-
- /*
- * Just map the table's physical memory
- * into our address space.
- */
- status = acpi_os_map_memory(address->pointer.physical,
- (acpi_size) header->length,
- ACPI_CAST_PTR(void, &full_table));
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not map memory for table [%4.4s] at %8.8X%8.8X for length %X",
- header->signature,
- ACPI_FORMAT_UINT64(address->pointer.
- physical),
- header->length));
- return (status);
- }
-
- /* Save allocation type */
-
- allocation = ACPI_MEM_MAPPED;
- break;
-
- default:
-
- ACPI_ERROR((AE_INFO, "Invalid address flags %X",
- address->pointer_type));
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /*
- * Validate checksum for _most_ tables,
- * even the ones whose signature we don't recognize
- */
- if (table_info->type != ACPI_TABLE_ID_FACS) {
- status = acpi_tb_verify_table_checksum(full_table);
-
-#if (!ACPI_CHECKSUM_ABORT)
- if (ACPI_FAILURE(status)) {
-
- /* Ignore the error if configuration says so */
-
- status = AE_OK;
- }
-#endif
- }
-
- /* Return values */
-
- table_info->pointer = full_table;
- table_info->length = (acpi_size) header->length;
- table_info->allocation = allocation;
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Found table [%4.4s] at %8.8X%8.8X, mapped/copied to %p\n",
- full_table->signature,
- ACPI_FORMAT_UINT64(address->pointer.physical),
- full_table));
-
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table_ptr
- *
- * PARAMETERS: table_type - one of the defined table types
- * Instance - Which table of this type
- * return_table - pointer to location to place the pointer for
- * return
- *
- * RETURN: Status
- *
- * DESCRIPTION: This function is called to get the pointer to an ACPI table.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_tb_get_table_ptr(acpi_table_type table_type,
- u32 instance, struct acpi_table_header **return_table)
-{
- struct acpi_table_desc *table_desc;
- u32 i;
-
- ACPI_FUNCTION_TRACE(tb_get_table_ptr);
-
- if (table_type > ACPI_TABLE_ID_MAX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Check for instance out of range of the current table count */
-
- if (instance > acpi_gbl_table_lists[table_type].count) {
- return_ACPI_STATUS(AE_NOT_EXIST);
- }
-
- /*
- * Walk the list to get the desired table
- * Note: Instance is one-based
- */
- table_desc = acpi_gbl_table_lists[table_type].next;
- for (i = 1; i < instance; i++) {
- table_desc = table_desc->next;
- }
-
- /* We are now pointing to the requested table's descriptor */
-
- *return_table = table_desc->pointer;
- return_ACPI_STATUS(AE_OK);
-}
+++ /dev/null
-/******************************************************************************
- *
- * Module Name: tbgetall - Get all required ACPI tables
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT ACPI_TABLES
-ACPI_MODULE_NAME("tbgetall")
-
-/* Local prototypes */
-static acpi_status
-acpi_tb_get_primary_table(struct acpi_pointer *address,
- struct acpi_table_desc *table_info);
-
-static acpi_status
-acpi_tb_get_secondary_table(struct acpi_pointer *address,
- acpi_string signature,
- struct acpi_table_desc *table_info);
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_primary_table
- *
- * PARAMETERS: Address - Physical address of table to retrieve
- * *table_info - Where the table info is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Maps the physical address of table into a logical address
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_get_primary_table(struct acpi_pointer *address,
- struct acpi_table_desc *table_info)
-{
- acpi_status status;
- struct acpi_table_header header;
-
- ACPI_FUNCTION_TRACE(tb_get_primary_table);
-
- /* Ignore a NULL address in the RSDT */
-
- if (!address->pointer.value) {
- return_ACPI_STATUS(AE_OK);
- }
-
- /* Get the header in order to get signature and table size */
-
- status = acpi_tb_get_table_header(address, &header);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Clear the table_info */
-
- ACPI_MEMSET(table_info, 0, sizeof(struct acpi_table_desc));
-
- /*
- * Check the table signature and make sure it is recognized.
- * Also checks the header checksum
- */
- table_info->pointer = &header;
- status = acpi_tb_recognize_table(table_info, ACPI_TABLE_PRIMARY);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get the entire table */
-
- status = acpi_tb_get_table_body(address, &header, table_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Install the table */
-
- status = acpi_tb_install_table(table_info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_secondary_table
- *
- * PARAMETERS: Address - Physical address of table to retrieve
- * *table_info - Where the table info is returned
- *
- * RETURN: Status
- *
- * DESCRIPTION: Maps the physical address of table into a logical address
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_get_secondary_table(struct acpi_pointer *address,
- acpi_string signature,
- struct acpi_table_desc *table_info)
-{
- acpi_status status;
- struct acpi_table_header header;
-
- ACPI_FUNCTION_TRACE_STR(tb_get_secondary_table, signature);
-
- /* Get the header in order to match the signature */
-
- status = acpi_tb_get_table_header(address, &header);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Signature must match request */
-
- if (!ACPI_COMPARE_NAME(header.signature, signature)) {
- ACPI_ERROR((AE_INFO,
- "Incorrect table signature - wanted [%s] found [%4.4s]",
- signature, header.signature));
- return_ACPI_STATUS(AE_BAD_SIGNATURE);
- }
-
- /*
- * Check the table signature and make sure it is recognized.
- * Also checks the header checksum
- */
- table_info->pointer = &header;
- status = acpi_tb_recognize_table(table_info, ACPI_TABLE_SECONDARY);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get the entire table */
-
- status = acpi_tb_get_table_body(address, &header, table_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Install the table */
-
- status = acpi_tb_install_table(table_info);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_required_tables
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load and validate tables other than the RSDT. The RSDT must
- * already be loaded and validated.
- *
- * Get the minimum set of ACPI tables, namely:
- *
- * 1) FADT (via RSDT in loop below)
- * 2) FACS (via FADT)
- * 3) DSDT (via FADT)
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_get_required_tables(void)
-{
- acpi_status status = AE_OK;
- u32 i;
- struct acpi_table_desc table_info;
- struct acpi_pointer address;
-
- ACPI_FUNCTION_TRACE(tb_get_required_tables);
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%d ACPI tables in RSDT\n",
- acpi_gbl_rsdt_table_count));
-
- address.pointer_type = acpi_gbl_table_flags | ACPI_LOGICAL_ADDRESSING;
-
- /*
- * Loop through all table pointers found in RSDT.
- * This will NOT include the FACS and DSDT - we must get
- * them after the loop.
- *
- * The only tables we are interested in getting here is the FADT and
- * any SSDTs.
- */
- for (i = 0; i < acpi_gbl_rsdt_table_count; i++) {
-
- /* Get the table address from the common internal XSDT */
-
- address.pointer.value = acpi_gbl_XSDT->table_offset_entry[i];
-
- /*
- * Get the tables needed by this subsystem (FADT and any SSDTs).
- * NOTE: All other tables are completely ignored at this time.
- */
- status = acpi_tb_get_primary_table(&address, &table_info);
- if ((status != AE_OK) && (status != AE_TABLE_NOT_SUPPORTED)) {
- ACPI_WARNING((AE_INFO,
- "%s, while getting table at %8.8X%8.8X",
- acpi_format_exception(status),
- ACPI_FORMAT_UINT64(address.pointer.
- value)));
- }
- }
-
- /* We must have a FADT to continue */
-
- if (!acpi_gbl_FADT) {
- ACPI_ERROR((AE_INFO, "No FADT present in RSDT/XSDT"));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
- /*
- * Convert the FADT to a common format. This allows earlier revisions of
- * the table to coexist with newer versions, using common access code.
- */
- status = acpi_tb_convert_table_fadt();
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not convert FADT to internal common format"));
- return_ACPI_STATUS(status);
- }
-
- /* Get the FACS (Pointed to by the FADT) */
-
- address.pointer.value = acpi_gbl_FADT->xfirmware_ctrl;
-
- status = acpi_tb_get_secondary_table(&address, FACS_SIG, &table_info);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not get/install the FACS"));
- return_ACPI_STATUS(status);
- }
-
- /*
- * Create the common FACS pointer table
- * (Contains pointers to the original table)
- */
- status = acpi_tb_build_common_facs(&table_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Get/install the DSDT (Pointed to by the FADT) */
-
- address.pointer.value = acpi_gbl_FADT->Xdsdt;
-
- status = acpi_tb_get_secondary_table(&address, DSDT_SIG, &table_info);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO, "Could not get/install the DSDT"));
- return_ACPI_STATUS(status);
- }
-
- /* Set Integer Width (32/64) based upon DSDT revision */
-
- acpi_ut_set_integer_width(acpi_gbl_DSDT->revision);
-
- /* Dump the entire DSDT */
-
- ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
- "Hex dump of entire DSDT, size %d (0x%X), Integer width = %d\n",
- acpi_gbl_DSDT->length, acpi_gbl_DSDT->length,
- acpi_gbl_integer_bit_width));
-
- ACPI_DUMP_BUFFER(ACPI_CAST_PTR(u8, acpi_gbl_DSDT),
- acpi_gbl_DSDT->length);
-
- /* Always delete the RSDP mapping, we are done with it */
-
- acpi_tb_delete_tables_by_type(ACPI_TABLE_ID_RSDP);
- return_ACPI_STATUS(status);
-}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*/
#include <acpi/acpi.h>
+#include <acpi/acnamesp.h>
#include <acpi/actables.h>
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbinstal")
-/* Local prototypes */
-static acpi_status
-acpi_tb_match_signature(char *signature,
- struct acpi_table_desc *table_info, u8 search_type);
-
-/*******************************************************************************
+/******************************************************************************
*
- * FUNCTION: acpi_tb_match_signature
+ * FUNCTION: acpi_tb_verify_table
*
- * PARAMETERS: Signature - Table signature to match
- * table_info - Return data
- * search_type - Table type to match (primary/secondary)
+ * PARAMETERS: table_desc - table
*
* RETURN: Status
*
- * DESCRIPTION: Compare signature against the list of "ACPI-subsystem-owned"
- * tables (DSDT/FADT/SSDT, etc.) Returns the table_type_iD on match.
+ * DESCRIPTION: this function is called to verify and map table
*
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_match_signature(char *signature,
- struct acpi_table_desc *table_info, u8 search_type)
+ *****************************************************************************/
+acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc)
{
- acpi_native_uint i;
+ acpi_status status = AE_OK;
- ACPI_FUNCTION_TRACE(tb_match_signature);
+ ACPI_FUNCTION_TRACE(tb_verify_table);
- /* Search for a signature match among the known table types */
+ /* Map the table if necessary */
- for (i = 0; i < (ACPI_TABLE_ID_MAX + 1); i++) {
- if (!(acpi_gbl_table_data[i].flags & search_type)) {
- continue;
+ if (!table_desc->pointer) {
+ if ((table_desc->flags & ACPI_TABLE_ORIGIN_MASK) ==
+ ACPI_TABLE_ORIGIN_MAPPED) {
+ table_desc->pointer =
+ acpi_os_map_memory(table_desc->address,
+ table_desc->length);
}
+ if (!table_desc->pointer) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+ }
- if (!ACPI_STRNCMP(signature, acpi_gbl_table_data[i].signature,
- acpi_gbl_table_data[i].sig_length)) {
-
- /* Found a signature match, return index if requested */
+ /* FACS is the odd table, has no standard ACPI header and no checksum */
- if (table_info) {
- table_info->type = (u8) i;
- }
+ if (!ACPI_COMPARE_NAME(&table_desc->signature, ACPI_SIG_FACS)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Table [%4.4s] is an ACPI table consumed by the core subsystem\n",
- (char *)acpi_gbl_table_data[i].
- signature));
+ /* Always calculate checksum, ignore bad checksum if requested */
- return_ACPI_STATUS(AE_OK);
- }
+ status =
+ acpi_tb_verify_checksum(table_desc->pointer,
+ table_desc->length);
}
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "Table [%4.4s] is not an ACPI table consumed by the core subsystem - ignored\n",
- (char *)signature));
-
- return_ACPI_STATUS(AE_TABLE_NOT_SUPPORTED);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_install_table
+ * FUNCTION: acpi_tb_add_table
*
- * PARAMETERS: table_info - Return value from acpi_tb_get_table_body
+ * PARAMETERS: table_desc - Table descriptor
+ * table_index - Where the table index is returned
*
* RETURN: Status
*
- * DESCRIPTION: Install the table into the global data structures.
+ * DESCRIPTION: This function is called to add the ACPI table
*
******************************************************************************/
-acpi_status acpi_tb_install_table(struct acpi_table_desc *table_info)
+acpi_status
+acpi_tb_add_table(struct acpi_table_desc *table_desc,
+ acpi_native_uint * table_index)
{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(tb_install_table);
+ acpi_native_uint i;
+ acpi_native_uint length;
+ acpi_status status = AE_OK;
- /* Lock tables while installing */
+ ACPI_FUNCTION_TRACE(tb_add_table);
- status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not acquire table mutex"));
- return_ACPI_STATUS(status);
+ if (!table_desc->pointer) {
+ status = acpi_tb_verify_table(table_desc);
+ if (ACPI_FAILURE(status) || !table_desc->pointer) {
+ return_ACPI_STATUS(status);
+ }
}
- /*
- * Ignore a table that is already installed. For example, some BIOS
- * ASL code will repeatedly attempt to load the same SSDT.
- */
- status = acpi_tb_is_table_installed(table_info);
- if (ACPI_FAILURE(status)) {
- goto unlock_and_exit;
+ /* The table must be either an SSDT or a PSDT */
+
+ if ((!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT))
+ &&
+ (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)))
+ {
+ ACPI_ERROR((AE_INFO,
+ "Table has invalid signature [%4.4s], must be SSDT or PSDT",
+ table_desc->pointer->signature));
+ return_ACPI_STATUS(AE_BAD_SIGNATURE);
}
- /* Install the table into the global data structure */
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+
+ /* Check if table is already registered */
+
+ for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
+ if (!acpi_gbl_root_table_list.tables[i].pointer) {
+ status =
+ acpi_tb_verify_table(&acpi_gbl_root_table_list.
+ tables[i]);
+ if (ACPI_FAILURE(status)
+ || !acpi_gbl_root_table_list.tables[i].pointer) {
+ continue;
+ }
+ }
+
+ length = ACPI_MIN(table_desc->length,
+ acpi_gbl_root_table_list.tables[i].length);
+ if (ACPI_MEMCMP(table_desc->pointer,
+ acpi_gbl_root_table_list.tables[i].pointer,
+ length)) {
+ continue;
+ }
+
+ /* Table is already registered */
+
+ acpi_tb_delete_table(table_desc);
+ *table_index = i;
+ goto release;
+ }
- status = acpi_tb_init_table_descriptor(table_info->type, table_info);
+ /*
+ * Add the table to the global table list
+ */
+ status = acpi_tb_store_table(table_desc->address, table_desc->pointer,
+ table_desc->length, table_desc->flags,
+ table_index);
if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not install table [%4.4s]",
- table_info->pointer->signature));
+ goto release;
}
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "%s located at %p\n",
- acpi_gbl_table_data[table_info->type].name,
- table_info->pointer));
+ acpi_tb_print_table_header(table_desc->address, table_desc->pointer);
- unlock_and_exit:
+ release:
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_recognize_table
+ * FUNCTION: acpi_tb_resize_root_table_list
*
- * PARAMETERS: table_info - Return value from acpi_tb_get_table_body
- * search_type - Table type to match (primary/secondary)
+ * PARAMETERS: None
*
* RETURN: Status
*
- * DESCRIPTION: Check a table signature for a match against known table types
- *
- * NOTE: All table pointers are validated as follows:
- * 1) Table pointer must point to valid physical memory
- * 2) Signature must be 4 ASCII chars, even if we don't recognize the
- * name
- * 3) Table must be readable for length specified in the header
- * 4) Table checksum must be valid (with the exception of the FACS
- * which has no checksum for some odd reason)
+ * DESCRIPTION: Expand the size of global table array
*
******************************************************************************/
-acpi_status
-acpi_tb_recognize_table(struct acpi_table_desc *table_info, u8 search_type)
+acpi_status acpi_tb_resize_root_table_list(void)
{
- struct acpi_table_header *table_header;
- acpi_status status;
+ struct acpi_table_desc *tables;
- ACPI_FUNCTION_TRACE(tb_recognize_table);
+ ACPI_FUNCTION_TRACE(tb_resize_root_table_list);
- /* Ensure that we have a valid table pointer */
+ /* allow_resize flag is a parameter to acpi_initialize_tables */
- table_header = (struct acpi_table_header *)table_info->pointer;
- if (!table_header) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ if (!(acpi_gbl_root_table_list.flags & ACPI_ROOT_ALLOW_RESIZE)) {
+ ACPI_ERROR((AE_INFO,
+ "Resize of Root Table Array is not allowed"));
+ return_ACPI_STATUS(AE_SUPPORT);
}
- /*
- * We only "recognize" a limited number of ACPI tables -- namely, the
- * ones that are used by the subsystem (DSDT, FADT, etc.)
- *
- * An AE_TABLE_NOT_SUPPORTED means that the table was not recognized.
- * This can be any one of many valid ACPI tables, it just isn't one of
- * the tables that is consumed by the core subsystem
- */
- status = acpi_tb_match_signature(table_header->signature,
- table_info, search_type);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ /* Increase the Table Array size */
+
+ tables = ACPI_ALLOCATE_ZEROED((acpi_gbl_root_table_list.size +
+ ACPI_ROOT_TABLE_SIZE_INCREMENT)
+ * sizeof(struct acpi_table_desc));
+ if (!tables) {
+ ACPI_ERROR((AE_INFO,
+ "Could not allocate new root table array"));
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- status = acpi_tb_validate_table_header(table_header);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ /* Copy and free the previous table array */
+
+ if (acpi_gbl_root_table_list.tables) {
+ ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables,
+ acpi_gbl_root_table_list.size *
+ sizeof(struct acpi_table_desc));
+
+ if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
+ ACPI_FREE(acpi_gbl_root_table_list.tables);
+ }
}
- /* Return the table type and length via the info struct */
+ acpi_gbl_root_table_list.tables = tables;
+ acpi_gbl_root_table_list.size += ACPI_ROOT_TABLE_SIZE_INCREMENT;
+ acpi_gbl_root_table_list.flags |= (u8) ACPI_ROOT_ORIGIN_ALLOCATED;
- table_info->length = (acpi_size) table_header->length;
- return_ACPI_STATUS(status);
+ return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_init_table_descriptor
+ * FUNCTION: acpi_tb_store_table
*
- * PARAMETERS: table_type - The type of the table
- * table_info - A table info struct
+ * PARAMETERS: Address - Table address
+ * Table - Table header
+ * Length - Table length
+ * Flags - flags
*
- * RETURN: None.
+ * RETURN: Status and table index.
*
- * DESCRIPTION: Install a table into the global data structs.
+ * DESCRIPTION: Add an ACPI table to the global table list
*
******************************************************************************/
acpi_status
-acpi_tb_init_table_descriptor(acpi_table_type table_type,
- struct acpi_table_desc *table_info)
+acpi_tb_store_table(acpi_physical_address address,
+ struct acpi_table_header *table,
+ u32 length, u8 flags, acpi_native_uint * table_index)
{
- struct acpi_table_list *list_head;
- struct acpi_table_desc *table_desc;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE_U32(tb_init_table_descriptor, table_type);
+ acpi_status status = AE_OK;
- /* Allocate a descriptor for this table */
+ /* Ensure that there is room for the table in the Root Table List */
- table_desc = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_table_desc));
- if (!table_desc) {
- return_ACPI_STATUS(AE_NO_MEMORY);
+ if (acpi_gbl_root_table_list.count >= acpi_gbl_root_table_list.size) {
+ status = acpi_tb_resize_root_table_list();
+ if (ACPI_FAILURE(status)) {
+ return (status);
+ }
}
- /* Get a new owner ID for the table */
+ /* Initialize added table */
+
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].
+ address = address;
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].
+ pointer = table;
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].length =
+ length;
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].
+ owner_id = 0;
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].flags =
+ flags;
+
+ ACPI_MOVE_32_TO_32(&
+ (acpi_gbl_root_table_list.
+ tables[acpi_gbl_root_table_list.count].signature),
+ table->signature);
+
+ *table_index = acpi_gbl_root_table_list.count;
+ acpi_gbl_root_table_list.count++;
+ return (status);
+}
- status = acpi_ut_allocate_owner_id(&table_desc->owner_id);
- if (ACPI_FAILURE(status)) {
- goto error_exit1;
- }
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_delete_table
+ *
+ * PARAMETERS: table_index - Table index
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Delete one internal ACPI table
+ *
+ ******************************************************************************/
- /* Install the table into the global data structure */
+void acpi_tb_delete_table(struct acpi_table_desc *table_desc)
+{
+ /* Table must be mapped or allocated */
+ if (!table_desc->pointer) {
+ return;
+ }
+ switch (table_desc->flags & ACPI_TABLE_ORIGIN_MASK) {
+ case ACPI_TABLE_ORIGIN_MAPPED:
+ acpi_os_unmap_memory(table_desc->pointer, table_desc->length);
+ break;
+ case ACPI_TABLE_ORIGIN_ALLOCATED:
+ ACPI_FREE(table_desc->pointer);
+ break;
+ default:;
+ }
- list_head = &acpi_gbl_table_lists[table_type];
+ table_desc->pointer = NULL;
+}
- /*
- * Two major types of tables: 1) Only one instance is allowed. This
- * includes most ACPI tables such as the DSDT. 2) Multiple instances of
- * the table are allowed. This includes SSDT and PSDTs.
- */
- if (ACPI_IS_SINGLE_TABLE(acpi_gbl_table_data[table_type].flags)) {
- /*
- * Only one table allowed, and a table has alread been installed
- * at this location, so return an error.
- */
- if (list_head->next) {
- status = AE_ALREADY_EXISTS;
- goto error_exit2;
- }
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_terminate
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Delete all internal ACPI tables
+ *
+ ******************************************************************************/
- table_desc->next = list_head->next;
- list_head->next = table_desc;
+void acpi_tb_terminate(void)
+{
+ acpi_native_uint i;
- if (table_desc->next) {
- table_desc->next->prev = table_desc;
- }
+ ACPI_FUNCTION_TRACE(tb_terminate);
- list_head->count++;
- } else {
- /*
- * Link the new table in to the list of tables of this type.
- * Insert at the end of the list, order IS IMPORTANT.
- *
- * table_desc->Prev & Next are already NULL from calloc()
- */
- list_head->count++;
-
- if (!list_head->next) {
- list_head->next = table_desc;
- } else {
- table_desc->next = list_head->next;
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- while (table_desc->next->next) {
- table_desc->next = table_desc->next->next;
- }
+ /* Delete the individual tables */
- table_desc->next->next = table_desc;
- table_desc->prev = table_desc->next;
- table_desc->next = NULL;
- }
+ for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
+ acpi_tb_delete_table(&acpi_gbl_root_table_list.tables[i]);
}
- /* Finish initialization of the table descriptor */
-
- table_desc->loaded_into_namespace = FALSE;
- table_desc->type = (u8) table_type;
- table_desc->pointer = table_info->pointer;
- table_desc->length = table_info->length;
- table_desc->allocation = table_info->allocation;
- table_desc->aml_start = (u8 *) (table_desc->pointer + 1),
- table_desc->aml_length = (u32)
- (table_desc->length - (u32) sizeof(struct acpi_table_header));
-
/*
- * Set the appropriate global pointer (if there is one) to point to the
- * newly installed table
+ * Delete the root table array if allocated locally. Array cannot be
+ * mapped, so we don't need to check for that flag.
*/
- if (acpi_gbl_table_data[table_type].global_ptr) {
- *(acpi_gbl_table_data[table_type].global_ptr) =
- table_info->pointer;
+ if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
+ ACPI_FREE(acpi_gbl_root_table_list.tables);
}
- /* Return Data */
-
- table_info->owner_id = table_desc->owner_id;
- table_info->installed_desc = table_desc;
- return_ACPI_STATUS(AE_OK);
-
- /* Error exit with cleanup */
-
- error_exit2:
-
- acpi_ut_release_owner_id(&table_desc->owner_id);
+ acpi_gbl_root_table_list.tables = NULL;
+ acpi_gbl_root_table_list.flags = 0;
+ acpi_gbl_root_table_list.count = 0;
- error_exit1:
-
- ACPI_FREE(table_desc);
- return_ACPI_STATUS(status);
+ ACPI_DEBUG_PRINT((ACPI_DB_INFO, "ACPI Tables freed\n"));
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_delete_all_tables
+ * FUNCTION: acpi_tb_delete_namespace_by_owner
*
- * PARAMETERS: None.
+ * PARAMETERS: table_index - Table index
*
- * RETURN: None.
+ * RETURN: None
*
- * DESCRIPTION: Delete all internal ACPI tables
+ * DESCRIPTION: Delete all namespace objects created when this table was loaded.
*
******************************************************************************/
-void acpi_tb_delete_all_tables(void)
+void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index)
{
- acpi_table_type type;
+ acpi_owner_id owner_id;
- /*
- * Free memory allocated for ACPI tables
- * Memory can either be mapped or allocated
- */
- for (type = 0; type < (ACPI_TABLE_ID_MAX + 1); type++) {
- acpi_tb_delete_tables_by_type(type);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ owner_id =
+ acpi_gbl_root_table_list.tables[table_index].owner_id;
+ } else {
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return;
}
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ acpi_ns_delete_namespace_by_owner(owner_id);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_delete_tables_by_type
+ * FUNCTION: acpi_tb_allocate_owner_id
*
- * PARAMETERS: Type - The table type to be deleted
+ * PARAMETERS: table_index - Table index
*
- * RETURN: None.
+ * RETURN: Status
*
- * DESCRIPTION: Delete an internal ACPI table
- * Locks the ACPI table mutex
+ * DESCRIPTION: Allocates owner_id in table_desc
*
******************************************************************************/
-void acpi_tb_delete_tables_by_type(acpi_table_type type)
+acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index)
{
- struct acpi_table_desc *table_desc;
- u32 count;
- u32 i;
+ acpi_status status = AE_BAD_PARAMETER;
- ACPI_FUNCTION_TRACE_U32(tb_delete_tables_by_type, type);
+ ACPI_FUNCTION_TRACE(tb_allocate_owner_id);
- if (type > ACPI_TABLE_ID_MAX) {
- return_VOID;
- }
-
- if (ACPI_FAILURE(acpi_ut_acquire_mutex(ACPI_MTX_TABLES))) {
- return;
- }
-
- /* Clear the appropriate "typed" global table pointer */
-
- switch (type) {
- case ACPI_TABLE_ID_RSDP:
- acpi_gbl_RSDP = NULL;
- break;
-
- case ACPI_TABLE_ID_DSDT:
- acpi_gbl_DSDT = NULL;
- break;
-
- case ACPI_TABLE_ID_FADT:
- acpi_gbl_FADT = NULL;
- break;
-
- case ACPI_TABLE_ID_FACS:
- acpi_gbl_FACS = NULL;
- break;
-
- case ACPI_TABLE_ID_XSDT:
- acpi_gbl_XSDT = NULL;
- break;
-
- case ACPI_TABLE_ID_SSDT:
- case ACPI_TABLE_ID_PSDT:
- default:
- break;
- }
-
- /*
- * Free the table
- * 1) Get the head of the list
- */
- table_desc = acpi_gbl_table_lists[type].next;
- count = acpi_gbl_table_lists[type].count;
-
- /*
- * 2) Walk the entire list, deleting both the allocated tables
- * and the table descriptors
- */
- for (i = 0; i < count; i++) {
- table_desc = acpi_tb_uninstall_table(table_desc);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ status = acpi_ut_allocate_owner_id
+ (&(acpi_gbl_root_table_list.tables[table_index].owner_id));
}
(void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- return_VOID;
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_delete_single_table
+ * FUNCTION: acpi_tb_release_owner_id
*
- * PARAMETERS: table_info - A table info struct
+ * PARAMETERS: table_index - Table index
*
- * RETURN: None.
+ * RETURN: Status
*
- * DESCRIPTION: Low-level free for a single ACPI table. Handles cases where
- * the table was allocated a buffer or was mapped.
+ * DESCRIPTION: Releases owner_id in table_desc
*
******************************************************************************/
-void acpi_tb_delete_single_table(struct acpi_table_desc *table_desc)
+acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index)
{
+ acpi_status status = AE_BAD_PARAMETER;
- /* Must have a valid table descriptor and pointer */
+ ACPI_FUNCTION_TRACE(tb_release_owner_id);
- if ((!table_desc) || (!table_desc->pointer)) {
- return;
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ acpi_ut_release_owner_id(&
+ (acpi_gbl_root_table_list.
+ tables[table_index].owner_id));
+ status = AE_OK;
}
- /* Valid table, determine type of memory allocation */
-
- switch (table_desc->allocation) {
- case ACPI_MEM_NOT_ALLOCATED:
- break;
-
- case ACPI_MEM_ALLOCATED:
-
- ACPI_FREE(table_desc->pointer);
- break;
-
- case ACPI_MEM_MAPPED:
-
- acpi_os_unmap_memory(table_desc->pointer, table_desc->length);
- break;
-
- default:
- break;
- }
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_uninstall_table
+ * FUNCTION: acpi_tb_get_owner_id
*
- * PARAMETERS: table_info - A table info struct
+ * PARAMETERS: table_index - Table index
+ * owner_id - Where the table owner_id is returned
*
- * RETURN: Pointer to the next table in the list (of same type)
+ * RETURN: Status
*
- * DESCRIPTION: Free the memory associated with an internal ACPI table that
- * is either installed or has never been installed.
- * Table mutex should be locked.
+ * DESCRIPTION: returns owner_id for the ACPI table
*
******************************************************************************/
-struct acpi_table_desc *acpi_tb_uninstall_table(struct acpi_table_desc
- *table_desc)
+acpi_status
+acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id)
{
- struct acpi_table_desc *next_desc;
+ acpi_status status = AE_BAD_PARAMETER;
- ACPI_FUNCTION_TRACE_PTR(tb_uninstall_table, table_desc);
+ ACPI_FUNCTION_TRACE(tb_get_owner_id);
- if (!table_desc) {
- return_PTR(NULL);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ *owner_id =
+ acpi_gbl_root_table_list.tables[table_index].owner_id;
+ status = AE_OK;
}
- /* Unlink the descriptor from the doubly linked list */
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+}
- if (table_desc->prev) {
- table_desc->prev->next = table_desc->next;
- } else {
- /* Is first on list, update list head */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_is_table_loaded
+ *
+ * PARAMETERS: table_index - Table index
+ *
+ * RETURN: Table Loaded Flag
+ *
+ ******************************************************************************/
- acpi_gbl_table_lists[table_desc->type].next = table_desc->next;
- }
+u8 acpi_tb_is_table_loaded(acpi_native_uint table_index)
+{
+ u8 is_loaded = FALSE;
- if (table_desc->next) {
- table_desc->next->prev = table_desc->prev;
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ is_loaded = (u8)
+ (acpi_gbl_root_table_list.tables[table_index].
+ flags & ACPI_TABLE_IS_LOADED);
}
- /* Free the memory allocated for the table itself */
-
- acpi_tb_delete_single_table(table_desc);
-
- /* Free the owner ID associated with this table */
-
- acpi_ut_release_owner_id(&table_desc->owner_id);
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return (is_loaded);
+}
- /* Free the table descriptor */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_set_table_loaded_flag
+ *
+ * PARAMETERS: table_index - Table index
+ * is_loaded - TRUE if table is loaded, FALSE otherwise
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Sets the table loaded flag to either TRUE or FALSE.
+ *
+ ******************************************************************************/
- next_desc = table_desc->next;
- ACPI_FREE(table_desc);
+void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded)
+{
- /* Return pointer to the next descriptor */
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ if (table_index < acpi_gbl_root_table_list.count) {
+ if (is_loaded) {
+ acpi_gbl_root_table_list.tables[table_index].flags |=
+ ACPI_TABLE_IS_LOADED;
+ } else {
+ acpi_gbl_root_table_list.tables[table_index].flags &=
+ ~ACPI_TABLE_IS_LOADED;
+ }
+ }
- return_PTR(next_desc);
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
}
+++ /dev/null
-/******************************************************************************
- *
- * Module Name: tbrsdt - ACPI RSDT table utilities
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT ACPI_TABLES
-ACPI_MODULE_NAME("tbrsdt")
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_verify_rsdp
- *
- * PARAMETERS: Address - RSDP (Pointer to RSDT)
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load and validate the RSDP (ptr) and RSDT (table)
- *
- ******************************************************************************/
-acpi_status acpi_tb_verify_rsdp(struct acpi_pointer *address)
-{
- struct acpi_table_desc table_info;
- acpi_status status;
- struct rsdp_descriptor *rsdp;
-
- ACPI_FUNCTION_TRACE(tb_verify_rsdp);
-
- switch (address->pointer_type) {
- case ACPI_LOGICAL_POINTER:
-
- rsdp = address->pointer.logical;
- break;
-
- case ACPI_PHYSICAL_POINTER:
- /*
- * Obtain access to the RSDP structure
- */
- status = acpi_os_map_memory(address->pointer.physical,
- sizeof(struct rsdp_descriptor),
- ACPI_CAST_PTR(void, &rsdp));
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- break;
-
- default:
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Verify RSDP signature and checksum */
-
- status = acpi_tb_validate_rsdp(rsdp);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- /* RSDP is ok. Init the table info */
-
- table_info.pointer = ACPI_CAST_PTR(struct acpi_table_header, rsdp);
- table_info.length = sizeof(struct rsdp_descriptor);
-
- if (address->pointer_type == ACPI_PHYSICAL_POINTER) {
- table_info.allocation = ACPI_MEM_MAPPED;
- } else {
- table_info.allocation = ACPI_MEM_NOT_ALLOCATED;
- }
-
- /* Save the table pointers and allocation info */
-
- status = acpi_tb_init_table_descriptor(ACPI_TABLE_ID_RSDP, &table_info);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- /* Save the RSDP in a global for easy access */
-
- acpi_gbl_RSDP =
- ACPI_CAST_PTR(struct rsdp_descriptor, table_info.pointer);
- return_ACPI_STATUS(status);
-
- /* Error exit */
- cleanup:
-
- if (acpi_gbl_table_flags & ACPI_PHYSICAL_POINTER) {
- acpi_os_unmap_memory(rsdp, sizeof(struct rsdp_descriptor));
- }
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_rsdt_address
- *
- * PARAMETERS: out_address - Where the address is returned
- *
- * RETURN: None, Address
- *
- * DESCRIPTION: Extract the address of either the RSDT or XSDT, depending on the
- * version of the RSDP and whether the XSDT pointer is valid
- *
- ******************************************************************************/
-
-void acpi_tb_get_rsdt_address(struct acpi_pointer *out_address)
-{
-
- ACPI_FUNCTION_ENTRY();
-
- out_address->pointer_type =
- acpi_gbl_table_flags | ACPI_LOGICAL_ADDRESSING;
-
- /* Use XSDT if it is present */
-
- if ((acpi_gbl_RSDP->revision >= 2) &&
- acpi_gbl_RSDP->xsdt_physical_address) {
- out_address->pointer.value =
- acpi_gbl_RSDP->xsdt_physical_address;
- acpi_gbl_root_table_type = ACPI_TABLE_TYPE_XSDT;
- } else {
- /* No XSDT, use the RSDT */
-
- out_address->pointer.value =
- acpi_gbl_RSDP->rsdt_physical_address;
- acpi_gbl_root_table_type = ACPI_TABLE_TYPE_RSDT;
- }
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_validate_rsdt
- *
- * PARAMETERS: table_ptr - Addressable pointer to the RSDT.
- *
- * RETURN: Status
- *
- * DESCRIPTION: Validate signature for the RSDT or XSDT
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_validate_rsdt(struct acpi_table_header *table_ptr)
-{
- char *signature;
-
- ACPI_FUNCTION_ENTRY();
-
- /* Validate minimum length */
-
- if (table_ptr->length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO,
- "RSDT/XSDT length (%X) is smaller than minimum (%zX)",
- table_ptr->length,
- sizeof(struct acpi_table_header)));
-
- return (AE_INVALID_TABLE_LENGTH);
- }
-
- /* Search for appropriate signature, RSDT or XSDT */
-
- if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- signature = RSDT_SIG;
- } else {
- signature = XSDT_SIG;
- }
-
- if (!ACPI_COMPARE_NAME(table_ptr->signature, signature)) {
-
- /* Invalid RSDT or XSDT signature */
-
- ACPI_ERROR((AE_INFO,
- "Invalid signature where RSDP indicates RSDT/XSDT should be located. RSDP:"));
-
- ACPI_DUMP_BUFFER(acpi_gbl_RSDP, 20);
-
- ACPI_ERROR((AE_INFO,
- "RSDT/XSDT signature at %X is invalid",
- acpi_gbl_RSDP->rsdt_physical_address));
-
- if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- ACPI_ERROR((AE_INFO, "Looking for RSDT"));
- } else {
- ACPI_ERROR((AE_INFO, "Looking for XSDT"));
- }
-
- ACPI_DUMP_BUFFER(ACPI_CAST_PTR(char, table_ptr), 48);
- return (AE_BAD_SIGNATURE);
- }
-
- return (AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_get_table_rsdt
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load and validate the RSDP (ptr) and RSDT (table)
- *
- ******************************************************************************/
-
-acpi_status acpi_tb_get_table_rsdt(void)
-{
- struct acpi_table_desc table_info;
- acpi_status status;
- struct acpi_pointer address;
-
- ACPI_FUNCTION_TRACE(tb_get_table_rsdt);
-
- /* Get the RSDT/XSDT via the RSDP */
-
- acpi_tb_get_rsdt_address(&address);
-
- table_info.type = ACPI_TABLE_ID_XSDT;
- status = acpi_tb_get_table(&address, &table_info);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not get the RSDT/XSDT"));
- return_ACPI_STATUS(status);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "RSDP located at %p, points to RSDT physical=%8.8X%8.8X\n",
- acpi_gbl_RSDP,
- ACPI_FORMAT_UINT64(address.pointer.value)));
-
- /* Check the RSDT or XSDT signature */
-
- status = acpi_tb_validate_rsdt(table_info.pointer);
- if (ACPI_FAILURE(status)) {
- goto error_cleanup;
- }
-
- /* Get the number of tables defined in the RSDT or XSDT */
-
- acpi_gbl_rsdt_table_count = acpi_tb_get_table_count(acpi_gbl_RSDP,
- table_info.pointer);
-
- /* Convert and/or copy to an XSDT structure */
-
- status = acpi_tb_convert_to_xsdt(&table_info);
- if (ACPI_FAILURE(status)) {
- goto error_cleanup;
- }
-
- /* Save the table pointers and allocation info */
-
- status = acpi_tb_init_table_descriptor(ACPI_TABLE_ID_XSDT, &table_info);
- if (ACPI_FAILURE(status)) {
- goto error_cleanup;
- }
-
- acpi_gbl_XSDT =
- ACPI_CAST_PTR(struct xsdt_descriptor, table_info.pointer);
-
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "XSDT located at %p\n", acpi_gbl_XSDT));
- return_ACPI_STATUS(status);
-
- error_cleanup:
-
- /* Free table allocated by acpi_tb_get_table */
-
- acpi_tb_delete_single_table(&table_info);
-
- return_ACPI_STATUS(status);
-}
/******************************************************************************
*
- * Module Name: tbutils - Table manipulation utilities
+ * Module Name: tbutils - table utilities
*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_MODULE_NAME("tbutils")
/* Local prototypes */
-#ifdef ACPI_OBSOLETE_FUNCTIONS
-acpi_status
-acpi_tb_handle_to_object(u16 table_id, struct acpi_table_desc **table_desc);
-#endif
+static acpi_physical_address
+acpi_tb_get_root_table_entry(u8 * table_entry,
+ acpi_native_uint table_entry_size);
/*******************************************************************************
*
- * FUNCTION: acpi_tb_is_table_installed
- *
- * PARAMETERS: new_table_desc - Descriptor for new table being installed
+ * FUNCTION: acpi_tb_tables_loaded
*
- * RETURN: Status - AE_ALREADY_EXISTS if the table is already installed
+ * PARAMETERS: None
*
- * DESCRIPTION: Determine if an ACPI table is already installed
+ * RETURN: TRUE if required ACPI tables are loaded
*
- * MUTEX: Table data structures should be locked
+ * DESCRIPTION: Determine if the minimum required ACPI tables are present
+ * (FADT, FACS, DSDT)
*
******************************************************************************/
-acpi_status acpi_tb_is_table_installed(struct acpi_table_desc *new_table_desc)
+u8 acpi_tb_tables_loaded(void)
{
- struct acpi_table_desc *table_desc;
-
- ACPI_FUNCTION_TRACE(tb_is_table_installed);
- /* Get the list descriptor and first table descriptor */
-
- table_desc = acpi_gbl_table_lists[new_table_desc->type].next;
+ if (acpi_gbl_root_table_list.count >= 3) {
+ return (TRUE);
+ }
- /* Examine all installed tables of this type */
+ return (FALSE);
+}
- while (table_desc) {
- /*
- * If the table lengths match, perform a full bytewise compare. This
- * means that we will allow tables with duplicate oem_table_id(s), as
- * long as the tables are different in some way.
- *
- * Checking if the table has been loaded into the namespace means that
- * we don't check for duplicate tables during the initial installation
- * of tables within the RSDT/XSDT.
- */
- if ((table_desc->loaded_into_namespace) &&
- (table_desc->pointer->length ==
- new_table_desc->pointer->length)
- &&
- (!ACPI_MEMCMP
- (table_desc->pointer, new_table_desc->pointer,
- new_table_desc->pointer->length))) {
-
- /* Match: this table is already installed */
-
- ACPI_DEBUG_PRINT((ACPI_DB_TABLES,
- "Table [%4.4s] already installed: Rev %X OemTableId [%8.8s]\n",
- new_table_desc->pointer->signature,
- new_table_desc->pointer->revision,
- new_table_desc->pointer->
- oem_table_id));
-
- new_table_desc->owner_id = table_desc->owner_id;
- new_table_desc->installed_desc = table_desc;
-
- return_ACPI_STATUS(AE_ALREADY_EXISTS);
- }
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_print_table_header
+ *
+ * PARAMETERS: Address - Table physical address
+ * Header - Table header
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print an ACPI table header. Special cases for FACS and RSDP.
+ *
+ ******************************************************************************/
- /* Get next table on the list */
+void
+acpi_tb_print_table_header(acpi_physical_address address,
+ struct acpi_table_header *header)
+{
- table_desc = table_desc->next;
+ if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_FACS)) {
+
+ /* FACS only has signature and length fields of common table header */
+
+ ACPI_INFO((AE_INFO, "%4.4s %08lX, %04X",
+ header->signature, (unsigned long)address,
+ header->length));
+ } else if (ACPI_COMPARE_NAME(header->signature, ACPI_SIG_RSDP)) {
+
+ /* RSDP has no common fields */
+
+ ACPI_INFO((AE_INFO, "RSDP %08lX, %04X (r%d %6.6s)",
+ (unsigned long)address,
+ (ACPI_CAST_PTR(struct acpi_table_rsdp, header)->
+ revision >
+ 0) ? ACPI_CAST_PTR(struct acpi_table_rsdp,
+ header)->length : 20,
+ ACPI_CAST_PTR(struct acpi_table_rsdp,
+ header)->revision,
+ ACPI_CAST_PTR(struct acpi_table_rsdp,
+ header)->oem_id));
+ } else {
+ /* Standard ACPI table with full common header */
+
+ ACPI_INFO((AE_INFO,
+ "%4.4s %08lX, %04X (r%d %6.6s %8.8s %8X %4.4s %8X)",
+ header->signature, (unsigned long)address,
+ header->length, header->revision, header->oem_id,
+ header->oem_table_id, header->oem_revision,
+ header->asl_compiler_id,
+ header->asl_compiler_revision));
}
-
- return_ACPI_STATUS(AE_OK);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_validate_table_header
+ * FUNCTION: acpi_tb_validate_checksum
*
- * PARAMETERS: table_header - Logical pointer to the table
+ * PARAMETERS: Table - ACPI table to verify
+ * Length - Length of entire table
*
* RETURN: Status
*
- * DESCRIPTION: Check an ACPI table header for validity
- *
- * NOTE: Table pointers are validated as follows:
- * 1) Table pointer must point to valid physical memory
- * 2) Signature must be 4 ASCII chars, even if we don't recognize the
- * name
- * 3) Table must be readable for length specified in the header
- * 4) Table checksum must be valid (with the exception of the FACS
- * which has no checksum because it contains variable fields)
+ * DESCRIPTION: Verifies that the table checksums to zero. Optionally returns
+ * exception on bad checksum.
*
******************************************************************************/
-acpi_status
-acpi_tb_validate_table_header(struct acpi_table_header *table_header)
+acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length)
{
- acpi_name signature;
-
- ACPI_FUNCTION_ENTRY();
-
- /* Verify that this is a valid address */
-
- if (!acpi_os_readable(table_header, sizeof(struct acpi_table_header))) {
- ACPI_ERROR((AE_INFO,
- "Cannot read table header at %p", table_header));
-
- return (AE_BAD_ADDRESS);
- }
+ u8 checksum;
- /* Ensure that the signature is 4 ASCII characters */
+ /* Compute the checksum on the table */
- ACPI_MOVE_32_TO_32(&signature, table_header->signature);
- if (!acpi_ut_valid_acpi_name(signature)) {
- ACPI_ERROR((AE_INFO, "Invalid table signature 0x%8.8X",
- signature));
+ checksum = acpi_tb_checksum(ACPI_CAST_PTR(u8, table), length);
- ACPI_DUMP_BUFFER(table_header,
- sizeof(struct acpi_table_header));
- return (AE_BAD_SIGNATURE);
- }
+ /* Checksum ok? (should be zero) */
- /* Validate the table length */
+ if (checksum) {
+ ACPI_WARNING((AE_INFO,
+ "Incorrect checksum in table [%4.4s] - %2.2X, should be %2.2X",
+ table->signature, table->checksum,
+ (u8) (table->checksum - checksum)));
- if (table_header->length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO,
- "Invalid length 0x%X in table with signature %4.4s",
- (u32) table_header->length,
- ACPI_CAST_PTR(char, &signature)));
+#if (ACPI_CHECKSUM_ABORT)
- ACPI_DUMP_BUFFER(table_header,
- sizeof(struct acpi_table_header));
- return (AE_BAD_HEADER);
+ return (AE_BAD_CHECKSUM);
+#endif
}
return (AE_OK);
/*******************************************************************************
*
- * FUNCTION: acpi_tb_sum_table
+ * FUNCTION: acpi_tb_checksum
*
- * PARAMETERS: Buffer - Buffer to sum
- * Length - Size of the buffer
+ * PARAMETERS: Buffer - Pointer to memory region to be checked
+ * Length - Length of this memory region
*
- * RETURN: 8 bit sum of buffer
+ * RETURN: Checksum (u8)
*
- * DESCRIPTION: Computes an 8 bit sum of the buffer(length) and returns it.
+ * DESCRIPTION: Calculates circular checksum of memory region.
*
******************************************************************************/
-u8 acpi_tb_sum_table(void *buffer, u32 length)
+u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length)
{
- acpi_native_uint i;
u8 sum = 0;
+ u8 *end = buffer + length;
- if (!buffer || !length) {
- return (0);
+ while (buffer < end) {
+ sum = (u8) (sum + *(buffer++));
}
- for (i = 0; i < length; i++) {
- sum = (u8) (sum + ((u8 *) buffer)[i]);
- }
- return (sum);
+ return sum;
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_generate_checksum
+ * FUNCTION: acpi_tb_install_table
*
- * PARAMETERS: Table - Pointer to a valid ACPI table (with a
- * standard ACPI header)
+ * PARAMETERS: Address - Physical address of DSDT or FACS
+ * Flags - Flags
+ * Signature - Table signature, NULL if no need to
+ * match
+ * table_index - Index into root table array
*
- * RETURN: 8 bit checksum of buffer
+ * RETURN: None
*
- * DESCRIPTION: Computes an 8 bit checksum of the table.
+ * DESCRIPTION: Install an ACPI table into the global data structure.
*
******************************************************************************/
-u8 acpi_tb_generate_checksum(struct acpi_table_header * table)
+void
+acpi_tb_install_table(acpi_physical_address address,
+ u8 flags, char *signature, acpi_native_uint table_index)
{
- u8 checksum;
+ struct acpi_table_header *table;
+
+ if (!address) {
+ ACPI_ERROR((AE_INFO,
+ "Null physical address for ACPI table [%s]",
+ signature));
+ return;
+ }
+
+ /* Map just the table header */
+
+ table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
+ if (!table) {
+ return;
+ }
+
+ /* If a particular signature is expected, signature must match */
+
+ if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
+ ACPI_ERROR((AE_INFO,
+ "Invalid signature 0x%X for ACPI table [%s]",
+ *ACPI_CAST_PTR(u32, table->signature), signature));
+ goto unmap_and_exit;
+ }
- /* Sum the entire table as-is */
+ /* Initialize the table entry */
- checksum = acpi_tb_sum_table(table, table->length);
+ acpi_gbl_root_table_list.tables[table_index].address = address;
+ acpi_gbl_root_table_list.tables[table_index].length = table->length;
+ acpi_gbl_root_table_list.tables[table_index].flags = flags;
- /* Subtract off the existing checksum value in the table */
+ ACPI_MOVE_32_TO_32(&
+ (acpi_gbl_root_table_list.tables[table_index].
+ signature), table->signature);
- checksum = (u8) (checksum - table->checksum);
+ acpi_tb_print_table_header(address, table);
- /* Compute the final checksum */
+ if (table_index == ACPI_TABLE_INDEX_DSDT) {
- checksum = (u8) (0 - checksum);
- return (checksum);
+ /* Global integer width is based upon revision of the DSDT */
+
+ acpi_ut_set_integer_width(table->revision);
+ }
+
+ unmap_and_exit:
+ acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_set_checksum
+ * FUNCTION: acpi_tb_get_root_table_entry
*
- * PARAMETERS: Table - Pointer to a valid ACPI table (with a
- * standard ACPI header)
+ * PARAMETERS: table_entry - Pointer to the RSDT/XSDT table entry
+ * table_entry_size - sizeof 32 or 64 (RSDT or XSDT)
*
- * RETURN: None. Sets the table checksum field
+ * RETURN: Physical address extracted from the root table
*
- * DESCRIPTION: Computes an 8 bit checksum of the table and inserts the
- * checksum into the table header.
+ * DESCRIPTION: Get one root table entry. Handles 32-bit and 64-bit cases on
+ * both 32-bit and 64-bit platforms
+ *
+ * NOTE: acpi_physical_address is 32-bit on 32-bit platforms, 64-bit on
+ * 64-bit platforms.
*
******************************************************************************/
-void acpi_tb_set_checksum(struct acpi_table_header *table)
+static acpi_physical_address
+acpi_tb_get_root_table_entry(u8 * table_entry,
+ acpi_native_uint table_entry_size)
{
+ u64 address64;
+
+ /*
+ * Get the table physical address (32-bit for RSDT, 64-bit for XSDT):
+ * Note: Addresses are 32-bit aligned (not 64) in both RSDT and XSDT
+ */
+ if (table_entry_size == sizeof(u32)) {
+ /*
+ * 32-bit platform, RSDT: Return 32-bit table entry
+ * 64-bit platform, RSDT: Expand 32-bit to 64-bit and return
+ */
+ return ((acpi_physical_address)
+ (*ACPI_CAST_PTR(u32, table_entry)));
+ } else {
+ /*
+ * 32-bit platform, XSDT: Truncate 64-bit to 32-bit and return
+ * 64-bit platform, XSDT: Move (unaligned) 64-bit to local, return 64-bit
+ */
+ ACPI_MOVE_64_TO_64(&address64, table_entry);
- table->checksum = acpi_tb_generate_checksum(table);
+#if ACPI_MACHINE_WIDTH == 32
+ if (address64 > ACPI_UINT32_MAX) {
+
+ /* Will truncate 64-bit address to 32 bits, issue warning */
+
+ ACPI_WARNING((AE_INFO,
+ "64-bit Physical Address in XSDT is too large (%8.8X%8.8X), truncating",
+ ACPI_FORMAT_UINT64(address64)));
+ }
+#endif
+ return ((acpi_physical_address) (address64));
+ }
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_verify_table_checksum
+ * FUNCTION: acpi_tb_parse_root_table
+ *
+ * PARAMETERS: Rsdp - Pointer to the RSDP
+ * Flags - Flags
*
- * PARAMETERS: *table_header - ACPI table to verify
+ * RETURN: Status
*
- * RETURN: 8 bit checksum of table
+ * DESCRIPTION: This function is called to parse the Root System Description
+ * Table (RSDT or XSDT)
*
- * DESCRIPTION: Generates an 8 bit checksum of table and returns and compares
- * it to the existing checksum value.
+ * NOTE: Tables are mapped (not copied) for efficiency. The FACS must
+ * be mapped and cannot be copied because it contains the actual
+ * memory location of the ACPI Global Lock.
*
******************************************************************************/
-acpi_status
-acpi_tb_verify_table_checksum(struct acpi_table_header *table_header)
+acpi_status __init
+acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags)
{
- u8 checksum;
+ struct acpi_table_rsdp *rsdp;
+ acpi_native_uint table_entry_size;
+ acpi_native_uint i;
+ u32 table_count;
+ struct acpi_table_header *table;
+ acpi_physical_address address;
+ u32 length;
+ u8 *table_entry;
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(tb_parse_root_table);
+
+ /*
+ * Map the entire RSDP and extract the address of the RSDT or XSDT
+ */
+ rsdp = acpi_os_map_memory(rsdp_address, sizeof(struct acpi_table_rsdp));
+ if (!rsdp) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
- ACPI_FUNCTION_TRACE(tb_verify_table_checksum);
+ acpi_tb_print_table_header(rsdp_address,
+ ACPI_CAST_PTR(struct acpi_table_header,
+ rsdp));
- /* Compute the checksum on the table */
+ /* Differentiate between RSDT and XSDT root tables */
- checksum = acpi_tb_generate_checksum(table_header);
+ if (rsdp->revision > 1 && rsdp->xsdt_physical_address) {
+ /*
+ * Root table is an XSDT (64-bit physical addresses). We must use the
+ * XSDT if the revision is > 1 and the XSDT pointer is present, as per
+ * the ACPI specification.
+ */
+ address = (acpi_physical_address) rsdp->xsdt_physical_address;
+ table_entry_size = sizeof(u64);
+ } else {
+ /* Root table is an RSDT (32-bit physical addresses) */
- /* Checksum ok? */
+ address = (acpi_physical_address) rsdp->rsdt_physical_address;
+ table_entry_size = sizeof(u32);
+ }
- if (checksum == table_header->checksum) {
- return_ACPI_STATUS(AE_OK);
+ /*
+ * It is not possible to map more than one entry in some environments,
+ * so unmap the RSDP here before mapping other tables
+ */
+ acpi_os_unmap_memory(rsdp, sizeof(struct acpi_table_rsdp));
+
+ /* Map the RSDT/XSDT table header to get the full table length */
+
+ table = acpi_os_map_memory(address, sizeof(struct acpi_table_header));
+ if (!table) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- ACPI_WARNING((AE_INFO,
- "Incorrect checksum in table [%4.4s] - is %2.2X, should be %2.2X",
- table_header->signature, table_header->checksum,
- checksum));
+ acpi_tb_print_table_header(address, table);
- return_ACPI_STATUS(AE_BAD_CHECKSUM);
-}
+ /* Get the length of the full table, verify length and map entire table */
-#ifdef ACPI_OBSOLETE_FUNCTIONS
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_handle_to_object
- *
- * PARAMETERS: table_id - Id for which the function is searching
- * table_desc - Pointer to return the matching table
- * descriptor.
- *
- * RETURN: Search the tables to find one with a matching table_id and
- * return a pointer to that table descriptor.
- *
- ******************************************************************************/
+ length = table->length;
+ acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
-acpi_status
-acpi_tb_handle_to_object(u16 table_id,
- struct acpi_table_desc **return_table_desc)
-{
- u32 i;
- struct acpi_table_desc *table_desc;
+ if (length < sizeof(struct acpi_table_header)) {
+ ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT",
+ length));
+ return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
+ }
- ACPI_FUNCTION_NAME(tb_handle_to_object);
+ table = acpi_os_map_memory(address, length);
+ if (!table) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
+ }
+
+ /* Validate the root table checksum */
+
+ status = acpi_tb_verify_checksum(table, length);
+ if (ACPI_FAILURE(status)) {
+ acpi_os_unmap_memory(table, length);
+ return_ACPI_STATUS(status);
+ }
- for (i = 0; i < ACPI_TABLE_MAX; i++) {
- table_desc = acpi_gbl_table_lists[i].next;
- while (table_desc) {
- if (table_desc->table_id == table_id) {
- *return_table_desc = table_desc;
- return (AE_OK);
+ /* Calculate the number of tables described in the root table */
+
+ table_count =
+ (u32) ((table->length -
+ sizeof(struct acpi_table_header)) / table_entry_size);
+
+ /*
+ * First two entries in the table array are reserved for the DSDT and FACS,
+ * which are not actually present in the RSDT/XSDT - they come from the FADT
+ */
+ table_entry =
+ ACPI_CAST_PTR(u8, table) + sizeof(struct acpi_table_header);
+ acpi_gbl_root_table_list.count = 2;
+
+ /*
+ * Initialize the root table array from the RSDT/XSDT
+ */
+ for (i = 0; i < table_count; i++) {
+ if (acpi_gbl_root_table_list.count >=
+ acpi_gbl_root_table_list.size) {
+
+ /* There is no more room in the root table array, attempt resize */
+
+ status = acpi_tb_resize_root_table_list();
+ if (ACPI_FAILURE(status)) {
+ ACPI_WARNING((AE_INFO,
+ "Truncating %u table entries!",
+ (unsigned)
+ (acpi_gbl_root_table_list.size -
+ acpi_gbl_root_table_list.
+ count)));
+ break;
}
+ }
+
+ /* Get the table physical address (32-bit for RSDT, 64-bit for XSDT) */
- table_desc = table_desc->next;
+ acpi_gbl_root_table_list.tables[acpi_gbl_root_table_list.count].
+ address =
+ acpi_tb_get_root_table_entry(table_entry, table_entry_size);
+
+ table_entry += table_entry_size;
+ acpi_gbl_root_table_list.count++;
+ }
+
+ /*
+ * It is not possible to map more than one entry in some environments,
+ * so unmap the root table here before mapping other tables
+ */
+ acpi_os_unmap_memory(table, length);
+
+ /*
+ * Complete the initialization of the root table array by examining
+ * the header of each table
+ */
+ for (i = 2; i < acpi_gbl_root_table_list.count; i++) {
+ acpi_tb_install_table(acpi_gbl_root_table_list.tables[i].
+ address, flags, NULL, i);
+
+ /* Special case for FADT - get the DSDT and FACS */
+
+ if (ACPI_COMPARE_NAME
+ (&acpi_gbl_root_table_list.tables[i].signature,
+ ACPI_SIG_FADT)) {
+ acpi_tb_parse_fadt(i, flags);
}
}
- ACPI_ERROR((AE_INFO, "TableId=%X does not exist", table_id));
- return (AE_BAD_PARAMETER);
+ return_ACPI_STATUS(AE_OK);
}
-#endif
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbxface")
+/* Local prototypes */
+static acpi_status acpi_tb_load_namespace(void);
+
/*******************************************************************************
*
- * FUNCTION: acpi_load_tables
+ * FUNCTION: acpi_allocate_root_table
*
- * PARAMETERS: None
+ * PARAMETERS: initial_table_count - Size of initial_table_array, in number of
+ * struct acpi_table_desc structures
*
* RETURN: Status
*
- * DESCRIPTION: This function is called to load the ACPI tables from the
- * provided RSDT
+ * DESCRIPTION: Allocate a root table array. Used by i_aSL compiler and
+ * acpi_initialize_tables.
*
******************************************************************************/
-acpi_status acpi_load_tables(void)
+
+acpi_status acpi_allocate_root_table(u32 initial_table_count)
{
- struct acpi_pointer rsdp_address;
- acpi_status status;
- ACPI_FUNCTION_TRACE(acpi_load_tables);
+ acpi_gbl_root_table_list.size = initial_table_count;
+ acpi_gbl_root_table_list.flags = ACPI_ROOT_ALLOW_RESIZE;
- /* Get the RSDP */
+ return (acpi_tb_resize_root_table_list());
+}
- status = acpi_os_get_root_pointer(ACPI_LOGICAL_ADDRESSING,
- &rsdp_address);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Could not get the RSDP"));
- goto error_exit;
- }
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_initialize_tables
+ *
+ * PARAMETERS: initial_table_array - Pointer to an array of pre-allocated
+ * struct acpi_table_desc structures. If NULL, the
+ * array is dynamically allocated.
+ * initial_table_count - Size of initial_table_array, in number of
+ * struct acpi_table_desc structures
+ * allow_realloc - Flag to tell Table Manager if resize of
+ * pre-allocated array is allowed. Ignored
+ * if initial_table_array is NULL.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Initialize the table manager, get the RSDP and RSDT/XSDT.
+ *
+ * NOTE: Allows static allocation of the initial table array in order
+ * to avoid the use of dynamic memory in confined environments
+ * such as the kernel boot sequence where it may not be available.
+ *
+ * If the host OS memory managers are initialized, use NULL for
+ * initial_table_array, and the table will be dynamically allocated.
+ *
+ ******************************************************************************/
- /* Map and validate the RSDP */
+acpi_status __init
+acpi_initialize_tables(struct acpi_table_desc * initial_table_array,
+ u32 initial_table_count, u8 allow_resize)
+{
+ acpi_physical_address rsdp_address;
+ acpi_status status;
- acpi_gbl_table_flags = rsdp_address.pointer_type;
+ ACPI_FUNCTION_TRACE(acpi_initialize_tables);
- status = acpi_tb_verify_rsdp(&rsdp_address);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "During RSDP validation"));
- goto error_exit;
+ /*
+ * Set up the Root Table Array
+ * Allocate the table array if requested
+ */
+ if (!initial_table_array) {
+ status = acpi_allocate_root_table(initial_table_count);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+ } else {
+ /* Root Table Array has been statically allocated by the host */
+
+ ACPI_MEMSET(initial_table_array, 0,
+ initial_table_count *
+ sizeof(struct acpi_table_desc));
+
+ acpi_gbl_root_table_list.tables = initial_table_array;
+ acpi_gbl_root_table_list.size = initial_table_count;
+ acpi_gbl_root_table_list.flags = ACPI_ROOT_ORIGIN_UNKNOWN;
+ if (allow_resize) {
+ acpi_gbl_root_table_list.flags |=
+ ACPI_ROOT_ALLOW_RESIZE;
+ }
}
- /* Get the RSDT via the RSDP */
+ /* Get the address of the RSDP */
- status = acpi_tb_get_table_rsdt();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Could not load RSDT"));
- goto error_exit;
+ rsdp_address = acpi_os_get_root_pointer();
+ if (!rsdp_address) {
+ return_ACPI_STATUS(AE_NOT_FOUND);
}
- /* Now get the tables needed by this subsystem (FADT, DSDT, etc.) */
+ /*
+ * Get the root table (RSDT or XSDT) and extract all entries to the local
+ * Root Table Array. This array contains the information of the RSDT/XSDT
+ * in a common, more useable format.
+ */
+ status =
+ acpi_tb_parse_root_table(rsdp_address, ACPI_TABLE_ORIGIN_MAPPED);
+ return_ACPI_STATUS(status);
+}
- status = acpi_tb_get_required_tables();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Could not get all required tables (DSDT/FADT/FACS)"));
- goto error_exit;
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_reallocate_root_table
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Reallocate Root Table List into dynamic memory. Copies the
+ * root list from the previously provided scratch area. Should
+ * be called once dynamic memory allocation is available in the
+ * kernel
+ *
+ ******************************************************************************/
+acpi_status acpi_reallocate_root_table(void)
+{
+ struct acpi_table_desc *tables;
+ acpi_size new_size;
+
+ ACPI_FUNCTION_TRACE(acpi_reallocate_root_table);
+
+ /*
+ * Only reallocate the root table if the host provided a static buffer
+ * for the table array in the call to acpi_initialize_tables.
+ */
+ if (acpi_gbl_root_table_list.flags & ACPI_ROOT_ORIGIN_ALLOCATED) {
+ return_ACPI_STATUS(AE_SUPPORT);
}
- ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
+ new_size =
+ (acpi_gbl_root_table_list.count +
+ ACPI_ROOT_TABLE_SIZE_INCREMENT) * sizeof(struct acpi_table_desc);
- /* Load the namespace from the tables */
+ /* Create new array and copy the old array */
- status = acpi_ns_load_namespace();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status, "Could not load namespace"));
- goto error_exit;
+ tables = ACPI_ALLOCATE_ZEROED(new_size);
+ if (!tables) {
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- return_ACPI_STATUS(AE_OK);
+ ACPI_MEMCPY(tables, acpi_gbl_root_table_list.tables, new_size);
- error_exit:
- ACPI_EXCEPTION((AE_INFO, status, "Could not load tables"));
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_tables)
+ acpi_gbl_root_table_list.size = acpi_gbl_root_table_list.count;
+ acpi_gbl_root_table_list.tables = tables;
+ acpi_gbl_root_table_list.flags =
+ ACPI_ROOT_ORIGIN_ALLOCATED | ACPI_ROOT_ALLOW_RESIZE;
+ return_ACPI_STATUS(AE_OK);
+}
/*******************************************************************************
*
* FUNCTION: acpi_load_table
acpi_status acpi_load_table(struct acpi_table_header *table_ptr)
{
acpi_status status;
- struct acpi_table_desc table_info;
- struct acpi_pointer address;
-
- ACPI_FUNCTION_TRACE(acpi_load_table);
-
- if (!table_ptr) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Copy the table to a local buffer */
+ acpi_native_uint table_index;
+ struct acpi_table_desc table_desc;
- address.pointer_type = ACPI_LOGICAL_POINTER | ACPI_LOGICAL_ADDRESSING;
- address.pointer.logical = table_ptr;
-
- status = acpi_tb_get_table_body(&address, table_ptr, &table_info);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Check signature for a valid table type */
-
- status = acpi_tb_recognize_table(&table_info, ACPI_TABLE_ALL);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ if (!table_ptr)
+ return AE_BAD_PARAMETER;
- /* Install the new table into the local data structures */
+ ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
+ table_desc.pointer = table_ptr;
+ table_desc.length = table_ptr->length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
- status = acpi_tb_install_table(&table_info);
+ /*
+ * Install the new table into the local data structures
+ */
+ status = acpi_tb_add_table(&table_desc, &table_index);
if (ACPI_FAILURE(status)) {
- if (status == AE_ALREADY_EXISTS) {
-
- /* Table already exists, no error */
-
- status = AE_OK;
- }
-
- /* Free table allocated by acpi_tb_get_table_body */
-
- acpi_tb_delete_single_table(&table_info);
- return_ACPI_STATUS(status);
+ return status;
}
+ status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
+ return status;
+}
- /* Convert the table to common format if necessary */
-
- switch (table_info.type) {
- case ACPI_TABLE_ID_FADT:
-
- status = acpi_tb_convert_table_fadt();
- break;
-
- case ACPI_TABLE_ID_FACS:
+ACPI_EXPORT_SYMBOL(acpi_load_table)
- status = acpi_tb_build_common_facs(&table_info);
- break;
+/******************************************************************************
+ *
+ * FUNCTION: acpi_get_table_header
+ *
+ * PARAMETERS: Signature - ACPI signature of needed table
+ * Instance - Which instance (for SSDTs)
+ * out_table_header - The pointer to the table header to fill
+ *
+ * RETURN: Status and pointer to mapped table header
+ *
+ * DESCRIPTION: Finds an ACPI table header.
+ *
+ * NOTE: Caller is responsible in unmapping the header with
+ * acpi_os_unmap_memory
+ *
+ *****************************************************************************/
+acpi_status
+acpi_get_table_header(char *signature,
+ acpi_native_uint instance,
+ struct acpi_table_header *out_table_header)
+{
+ acpi_native_uint i;
+ acpi_native_uint j;
+ struct acpi_table_header *header;
- default:
- /* Load table into namespace if it contains executable AML */
+ /* Parameter validation */
- status =
- acpi_ns_load_table(table_info.installed_desc,
- acpi_gbl_root_node);
- break;
+ if (!signature || !out_table_header) {
+ return (AE_BAD_PARAMETER);
}
- if (ACPI_FAILURE(status)) {
+ /*
+ * Walk the root table list
+ */
+ for (i = 0, j = 0; i < acpi_gbl_root_table_list.count; i++) {
+ if (!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ signature)) {
+ continue;
+ }
- /* Uninstall table and free the buffer */
+ if (++j < instance) {
+ continue;
+ }
- (void)acpi_tb_uninstall_table(table_info.installed_desc);
+ if (!acpi_gbl_root_table_list.tables[i].pointer) {
+ if ((acpi_gbl_root_table_list.tables[i].
+ flags & ACPI_TABLE_ORIGIN_MASK) ==
+ ACPI_TABLE_ORIGIN_MAPPED) {
+ header =
+ acpi_os_map_memory(acpi_gbl_root_table_list.
+ tables[i].address,
+ sizeof(struct
+ acpi_table_header));
+ if (!header) {
+ return AE_NO_MEMORY;
+ }
+ ACPI_MEMCPY(out_table_header, header,
+ sizeof(struct acpi_table_header));
+ acpi_os_unmap_memory(header,
+ sizeof(struct
+ acpi_table_header));
+ } else {
+ return AE_NOT_FOUND;
+ }
+ } else {
+ ACPI_MEMCPY(out_table_header,
+ acpi_gbl_root_table_list.tables[i].pointer,
+ sizeof(struct acpi_table_header));
+ }
+ return (AE_OK);
}
- return_ACPI_STATUS(status);
+ return (AE_NOT_FOUND);
}
-ACPI_EXPORT_SYMBOL(acpi_load_table)
+ACPI_EXPORT_SYMBOL(acpi_get_table_header)
-/*******************************************************************************
+
+/******************************************************************************
*
* FUNCTION: acpi_unload_table_id
*
- * PARAMETERS: table_type - Type of table to be unloaded
- * id - Owner ID of the table to be removed.
+ * PARAMETERS: id - Owner ID of the table to be removed.
*
* RETURN: Status
*
* DESCRIPTION: This routine is used to force the unload of a table (by id)
*
******************************************************************************/
-acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id)
+acpi_status acpi_unload_table_id(acpi_owner_id id)
{
- struct acpi_table_desc *table_desc;
- acpi_status status;
+ int i;
+ acpi_status status = AE_NOT_EXIST;
ACPI_FUNCTION_TRACE(acpi_unload_table);
- /* Parameter validation */
- if (table_type > ACPI_TABLE_ID_MAX)
- return_ACPI_STATUS(AE_BAD_PARAMETER);
-
/* Find table from the requested type list */
- table_desc = acpi_gbl_table_lists[table_type].next;
- while (table_desc && table_desc->owner_id != id)
- table_desc = table_desc->next;
-
- if (!table_desc)
- return_ACPI_STATUS(AE_NOT_EXIST);
-
- /*
- * Delete all namespace objects owned by this table. Note that these
- * objects can appear anywhere in the namespace by virtue of the AML
- * "Scope" operator. Thus, we need to track ownership by an ID, not
- * simply a position within the hierarchy
- */
- acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
-
- status = acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- if (ACPI_FAILURE(status))
- return_ACPI_STATUS(status);
-
- (void)acpi_tb_uninstall_table(table_desc);
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
-
- return_ACPI_STATUS(AE_OK);
+ for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
+ if (id != acpi_gbl_root_table_list.tables[i].owner_id) {
+ continue;
+ }
+ /*
+ * Delete all namespace objects owned by this table. Note that these
+ * objects can appear anywhere in the namespace by virtue of the AML
+ * "Scope" operator. Thus, we need to track ownership by an ID, not
+ * simply a position within the hierarchy
+ */
+ acpi_tb_delete_namespace_by_owner(i);
+ acpi_tb_release_owner_id(i);
+ acpi_tb_set_table_loaded_flag(i, FALSE);
+ }
+ return_ACPI_STATUS(status);
}
ACPI_EXPORT_SYMBOL(acpi_unload_table_id)
-#ifdef ACPI_FUTURE_USAGE
/*******************************************************************************
*
- * FUNCTION: acpi_unload_table
+ * FUNCTION: acpi_get_table
*
- * PARAMETERS: table_type - Type of table to be unloaded
+ * PARAMETERS: Signature - ACPI signature of needed table
+ * Instance - Which instance (for SSDTs)
+ * out_table - Where the pointer to the table is returned
*
- * RETURN: Status
+ * RETURN: Status and pointer to table
*
- * DESCRIPTION: This routine is used to force the unload of a table
+ * DESCRIPTION: Finds and verifies an ACPI table.
*
- ******************************************************************************/
-acpi_status acpi_unload_table(acpi_table_type table_type)
+ *****************************************************************************/
+acpi_status
+acpi_get_table(char *signature,
+ acpi_native_uint instance, struct acpi_table_header ** out_table)
{
- struct acpi_table_desc *table_desc;
-
- ACPI_FUNCTION_TRACE(acpi_unload_table);
+ acpi_native_uint i;
+ acpi_native_uint j;
+ acpi_status status;
/* Parameter validation */
- if (table_type > ACPI_TABLE_ID_MAX) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ if (!signature || !out_table) {
+ return (AE_BAD_PARAMETER);
}
- /* Find all tables of the requested type */
+ /*
+ * Walk the root table list
+ */
+ for (i = 0, j = 0; i < acpi_gbl_root_table_list.count; i++) {
+ if (!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ signature)) {
+ continue;
+ }
- table_desc = acpi_gbl_table_lists[table_type].next;
- if (!table_desc) {
- return_ACPI_STATUS(AE_NOT_EXIST);
- }
+ if (++j < instance) {
+ continue;
+ }
- while (table_desc) {
- /*
- * Delete all namespace objects owned by this table. Note that these
- * objects can appear anywhere in the namespace by virtue of the AML
- * "Scope" operator. Thus, we need to track ownership by an ID, not
- * simply a position within the hierarchy
- */
- acpi_ns_delete_namespace_by_owner(table_desc->owner_id);
- table_desc = table_desc->next;
- }
+ status =
+ acpi_tb_verify_table(&acpi_gbl_root_table_list.tables[i]);
+ if (ACPI_SUCCESS(status)) {
+ *out_table = acpi_gbl_root_table_list.tables[i].pointer;
+ }
- /* Delete (or unmap) all tables of this type */
+ if (!acpi_gbl_permanent_mmap) {
+ acpi_gbl_root_table_list.tables[i].pointer = 0;
+ }
- acpi_tb_delete_tables_by_type(table_type);
- return_ACPI_STATUS(AE_OK);
+ return (status);
+ }
+
+ return (AE_NOT_FOUND);
}
-ACPI_EXPORT_SYMBOL(acpi_unload_table)
+ACPI_EXPORT_SYMBOL(acpi_get_table)
/*******************************************************************************
*
- * FUNCTION: acpi_get_table_header
+ * FUNCTION: acpi_get_table_by_index
*
- * PARAMETERS: table_type - one of the defined table types
- * Instance - the non zero instance of the table, allows
- * support for multiple tables of the same type
- * see acpi_gbl_acpi_table_flag
- * out_table_header - pointer to the struct acpi_table_header if successful
+ * PARAMETERS: table_index - Table index
+ * Table - Where the pointer to the table is returned
*
- * DESCRIPTION: This function is called to get an ACPI table header. The caller
- * supplies an pointer to a data area sufficient to contain an ACPI
- * struct acpi_table_header structure.
+ * RETURN: Status and pointer to the table
*
- * The header contains a length field that can be used to determine
- * the size of the buffer needed to contain the entire table. This
- * function is not valid for the RSD PTR table since it does not
- * have a standard header and is fixed length.
+ * DESCRIPTION: Obtain a table by an index into the global table list.
*
******************************************************************************/
acpi_status
-acpi_get_table_header(acpi_table_type table_type,
- u32 instance, struct acpi_table_header *out_table_header)
+acpi_get_table_by_index(acpi_native_uint table_index,
+ struct acpi_table_header ** table)
{
- struct acpi_table_header *tbl_ptr;
acpi_status status;
- ACPI_FUNCTION_TRACE(acpi_get_table_header);
+ ACPI_FUNCTION_TRACE(acpi_get_table_by_index);
+
+ /* Parameter validation */
- if ((instance == 0) ||
- (table_type == ACPI_TABLE_ID_RSDP) || (!out_table_header)) {
+ if (!table) {
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Check the table type and instance */
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+
+ /* Validate index */
- if ((table_type > ACPI_TABLE_ID_MAX) ||
- (ACPI_IS_SINGLE_TABLE(acpi_gbl_table_data[table_type].flags) &&
- instance > 1)) {
+ if (table_index >= acpi_gbl_root_table_list.count) {
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Get a pointer to the entire table */
+ if (!acpi_gbl_root_table_list.tables[table_index].pointer) {
- status = acpi_tb_get_table_ptr(table_type, instance, &tbl_ptr);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
+ /* Table is not mapped, map it */
- /* The function will return a NULL pointer if the table is not loaded */
-
- if (tbl_ptr == NULL) {
- return_ACPI_STATUS(AE_NOT_EXIST);
+ status =
+ acpi_tb_verify_table(&acpi_gbl_root_table_list.
+ tables[table_index]);
+ if (ACPI_FAILURE(status)) {
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+ }
}
- /* Copy the header to the caller's buffer */
-
- ACPI_MEMCPY(ACPI_CAST_PTR(void, out_table_header),
- ACPI_CAST_PTR(void, tbl_ptr),
- sizeof(struct acpi_table_header));
-
- return_ACPI_STATUS(status);
+ *table = acpi_gbl_root_table_list.tables[table_index].pointer;
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(AE_OK);
}
-ACPI_EXPORT_SYMBOL(acpi_get_table_header)
-#endif /* ACPI_FUTURE_USAGE */
+ACPI_EXPORT_SYMBOL(acpi_get_table_by_index)
/*******************************************************************************
*
- * FUNCTION: acpi_get_table
+ * FUNCTION: acpi_tb_load_namespace
*
- * PARAMETERS: table_type - one of the defined table types
- * Instance - the non zero instance of the table, allows
- * support for multiple tables of the same type
- * see acpi_gbl_acpi_table_flag
- * ret_buffer - pointer to a structure containing a buffer to
- * receive the table
+ * PARAMETERS: None
*
* RETURN: Status
*
- * DESCRIPTION: This function is called to get an ACPI table. The caller
- * supplies an out_buffer large enough to contain the entire ACPI
- * table. The caller should call the acpi_get_table_header function
- * first to determine the buffer size needed. Upon completion
- * the out_buffer->Length field will indicate the number of bytes
- * copied into the out_buffer->buf_ptr buffer. This table will be
- * a complete table including the header.
+ * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
+ * the RSDT/XSDT.
*
******************************************************************************/
-acpi_status
-acpi_get_table(acpi_table_type table_type,
- u32 instance, struct acpi_buffer *ret_buffer)
+static acpi_status acpi_tb_load_namespace(void)
{
- struct acpi_table_header *tbl_ptr;
acpi_status status;
- acpi_size table_length;
+ struct acpi_table_header *table;
+ acpi_native_uint i;
- ACPI_FUNCTION_TRACE(acpi_get_table);
+ ACPI_FUNCTION_TRACE(tb_load_namespace);
- /* Parameter validation */
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- if (instance == 0) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ /*
+ * Load the namespace. The DSDT is required, but any SSDT and PSDT tables
+ * are optional.
+ */
+ if (!acpi_gbl_root_table_list.count ||
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT].signature),
+ ACPI_SIG_DSDT)
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]))) {
+ status = AE_NO_ACPI_TABLES;
+ goto unlock_and_exit;
}
- status = acpi_ut_validate_buffer(ret_buffer);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ /*
+ * Find DSDT table
+ */
+ status =
+ acpi_os_table_override(acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT].pointer,
+ &table);
+ if (ACPI_SUCCESS(status) && table) {
+ /*
+ * DSDT table has been found
+ */
+ acpi_tb_delete_table(&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]);
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer =
+ table;
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].length =
+ table->length;
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].flags =
+ ACPI_TABLE_ORIGIN_UNKNOWN;
+
+ ACPI_INFO((AE_INFO, "Table DSDT replaced by host OS"));
+ acpi_tb_print_table_header(0, table);
}
- /* Check the table type and instance */
+ status =
+ acpi_tb_verify_table(&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]);
+ if (ACPI_FAILURE(status)) {
- if ((table_type > ACPI_TABLE_ID_MAX) ||
- (ACPI_IS_SINGLE_TABLE(acpi_gbl_table_data[table_type].flags) &&
- instance > 1)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
+ /* A valid DSDT is required */
+
+ status = AE_NO_ACPI_TABLES;
+ goto unlock_and_exit;
}
- /* Get a pointer to the entire table */
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- status = acpi_tb_get_table_ptr(table_type, instance, &tbl_ptr);
+ /*
+ * Load and parse tables.
+ */
+ status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
}
/*
- * acpi_tb_get_table_ptr will return a NULL pointer if the
- * table is not loaded.
+ * Load any SSDT or PSDT tables. Note: Loop leaves tables locked
*/
- if (tbl_ptr == NULL) {
- return_ACPI_STATUS(AE_NOT_EXIST);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ for (i = 0; i < acpi_gbl_root_table_list.count; ++i) {
+ if ((!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ ACPI_SIG_SSDT)
+ &&
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.tables[i].
+ signature), ACPI_SIG_PSDT))
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.tables[i]))) {
+ continue;
+ }
+
+ /* Ignore errors while loading tables, get as many as possible */
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ (void)acpi_ns_load_table(i, acpi_gbl_root_node);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
}
- /* Get the table length */
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
- if (table_type == ACPI_TABLE_ID_RSDP) {
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+}
- /* RSD PTR is the only "table" without a header */
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_tables
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
+ *
+ ******************************************************************************/
- table_length = sizeof(struct rsdp_descriptor);
- } else {
- table_length = (acpi_size) tbl_ptr->length;
- }
+acpi_status acpi_load_tables(void)
+{
+ acpi_status status;
- /* Validate/Allocate/Clear caller buffer */
+ ACPI_FUNCTION_TRACE(acpi_load_tables);
- status = acpi_ut_initialize_buffer(ret_buffer, table_length);
+ /*
+ * Load the namespace from the tables
+ */
+ status = acpi_tb_load_namespace();
if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While loading namespace from ACPI tables"));
}
- /* Copy the table to the buffer */
-
- ACPI_MEMCPY(ACPI_CAST_PTR(void, ret_buffer->pointer),
- ACPI_CAST_PTR(void, tbl_ptr), table_length);
-
- return_ACPI_STATUS(AE_OK);
+ return_ACPI_STATUS(status);
}
-ACPI_EXPORT_SYMBOL(acpi_get_table)
+ACPI_EXPORT_SYMBOL(acpi_load_tables)
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_MODULE_NAME("tbxfroot")
/* Local prototypes */
-static acpi_status
-acpi_tb_find_rsdp(struct acpi_table_desc *table_info, u32 flags);
-
static u8 *acpi_tb_scan_memory_for_rsdp(u8 * start_address, u32 length);
+static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp);
+
/*******************************************************************************
*
* FUNCTION: acpi_tb_validate_rsdp
*
- * PARAMETERS: Rsdp - Pointer to unvalidated RSDP
+ * PARAMETERS: Rsdp - Pointer to unvalidated RSDP
*
* RETURN: Status
*
*
******************************************************************************/
-acpi_status acpi_tb_validate_rsdp(struct rsdp_descriptor *rsdp)
+static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
{
ACPI_FUNCTION_ENTRY();
/*
- * The signature and checksum must both be correct
+ * The signature and checksum must both be correct
+ *
+ * Note: Sometimes there exists more than one RSDP in memory; the valid
+ * RSDP has a valid checksum, all others have an invalid checksum.
*/
- if (ACPI_STRNCMP((char *)rsdp, RSDP_SIG, sizeof(RSDP_SIG) - 1) != 0) {
+ if (ACPI_STRNCMP((char *)rsdp, ACPI_SIG_RSDP, sizeof(ACPI_SIG_RSDP) - 1)
+ != 0) {
/* Nope, BAD Signature */
/* Check the standard checksum */
- if (acpi_tb_sum_table(rsdp, ACPI_RSDP_CHECKSUM_LENGTH) != 0) {
+ if (acpi_tb_checksum((u8 *) rsdp, ACPI_RSDP_CHECKSUM_LENGTH) != 0) {
return (AE_BAD_CHECKSUM);
}
/* Check extended checksum if table version >= 2 */
if ((rsdp->revision >= 2) &&
- (acpi_tb_sum_table(rsdp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0)) {
+ (acpi_tb_checksum((u8 *) rsdp, ACPI_RSDP_XCHECKSUM_LENGTH) != 0)) {
return (AE_BAD_CHECKSUM);
}
/*******************************************************************************
*
- * FUNCTION: acpi_tb_find_table
- *
- * PARAMETERS: Signature - String with ACPI table signature
- * oem_id - String with the table OEM ID
- * oem_table_id - String with the OEM Table ID
- * table_ptr - Where the table pointer is returned
- *
- * RETURN: Status
+ * FUNCTION: acpi_tb_find_rsdp
*
- * DESCRIPTION: Find an ACPI table (in the RSDT/XSDT) that matches the
- * Signature, OEM ID and OEM Table ID.
+ * PARAMETERS: table_address - Where the table pointer is returned
*
- ******************************************************************************/
-
-acpi_status
-acpi_tb_find_table(char *signature,
- char *oem_id,
- char *oem_table_id, struct acpi_table_header ** table_ptr)
-{
- acpi_status status;
- struct acpi_table_header *table;
-
- ACPI_FUNCTION_TRACE(tb_find_table);
-
- /* Validate string lengths */
-
- if ((ACPI_STRLEN(signature) > ACPI_NAME_SIZE) ||
- (ACPI_STRLEN(oem_id) > sizeof(table->oem_id)) ||
- (ACPI_STRLEN(oem_table_id) > sizeof(table->oem_table_id))) {
- return_ACPI_STATUS(AE_AML_STRING_LIMIT);
- }
-
- if (ACPI_COMPARE_NAME(signature, DSDT_SIG)) {
- /*
- * The DSDT pointer is contained in the FADT, not the RSDT.
- * This code should suffice, because the only code that would perform
- * a "find" on the DSDT is the data_table_region() AML opcode -- in
- * which case, the DSDT is guaranteed to be already loaded.
- * If this becomes insufficient, the FADT will have to be found first.
- */
- if (!acpi_gbl_DSDT) {
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
- table = acpi_gbl_DSDT;
- } else {
- /* Find the table */
-
- status = acpi_get_firmware_table(signature, 1,
- ACPI_LOGICAL_ADDRESSING,
- &table);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /* Check oem_id and oem_table_id */
-
- if ((oem_id[0] &&
- ACPI_STRNCMP(oem_id, table->oem_id,
- sizeof(table->oem_id))) ||
- (oem_table_id[0] &&
- ACPI_STRNCMP(oem_table_id, table->oem_table_id,
- sizeof(table->oem_table_id)))) {
- return_ACPI_STATUS(AE_AML_NAME_NOT_FOUND);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_TABLES, "Found table [%4.4s]\n",
- table->signature));
-
- *table_ptr = table;
- return_ACPI_STATUS(AE_OK);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_get_firmware_table
+ * RETURN: Status, RSDP physical address
*
- * PARAMETERS: Signature - Any ACPI table signature
- * Instance - the non zero instance of the table, allows
- * support for multiple tables of the same type
- * Flags - Physical/Virtual support
- * table_pointer - Where a buffer containing the table is
- * returned
+ * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor
+ * pointer structure. If it is found, set *RSDP to point to it.
*
- * RETURN: Status
+ * NOTE1: The RSDP must be either in the first 1_k of the Extended
+ * BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
+ * Only a 32-bit physical address is necessary.
*
- * DESCRIPTION: This function is called to get an ACPI table. A buffer is
- * allocated for the table and returned in table_pointer.
- * This table will be a complete table including the header.
+ * NOTE2: This function is always available, regardless of the
+ * initialization state of the rest of ACPI.
*
******************************************************************************/
-acpi_status
-acpi_get_firmware_table(acpi_string signature,
- u32 instance,
- u32 flags, struct acpi_table_header **table_pointer)
+acpi_status acpi_find_root_pointer(acpi_native_uint * table_address)
{
- acpi_status status;
- struct acpi_pointer address;
- struct acpi_table_header *header = NULL;
- struct acpi_table_desc *table_info = NULL;
- struct acpi_table_desc *rsdt_info;
- u32 table_count;
- u32 i;
- u32 j;
-
- ACPI_FUNCTION_TRACE(acpi_get_firmware_table);
-
- /*
- * Ensure that at least the table manager is initialized. We don't
- * require that the entire ACPI subsystem is up for this interface.
- * If we have a buffer, we must have a length too
- */
- if ((instance == 0) || (!signature) || (!table_pointer)) {
- return_ACPI_STATUS(AE_BAD_PARAMETER);
- }
-
- /* Ensure that we have a RSDP */
-
- if (!acpi_gbl_RSDP) {
-
- /* Get the RSDP */
-
- status = acpi_os_get_root_pointer(flags, &address);
- if (ACPI_FAILURE(status)) {
- ACPI_DEBUG_PRINT((ACPI_DB_INFO, "RSDP not found\n"));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
- }
-
- /* Map and validate the RSDP */
-
- if ((flags & ACPI_MEMORY_MODE) == ACPI_LOGICAL_ADDRESSING) {
- status = acpi_os_map_memory(address.pointer.physical,
- sizeof(struct
- rsdp_descriptor),
- (void *)&acpi_gbl_RSDP);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- } else {
- acpi_gbl_RSDP = address.pointer.logical;
- }
-
- /* The RDSP signature and checksum must both be correct */
-
- status = acpi_tb_validate_rsdp(acpi_gbl_RSDP);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
- /* Get the RSDT address via the RSDP */
-
- acpi_tb_get_rsdt_address(&address);
- ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "RSDP located at %p, RSDT physical=%8.8X%8.8X\n",
- acpi_gbl_RSDP,
- ACPI_FORMAT_UINT64(address.pointer.value)));
+ u8 *table_ptr;
+ u8 *mem_rover;
+ u32 physical_address;
- /* Insert processor_mode flags */
+ ACPI_FUNCTION_TRACE(acpi_find_root_pointer);
- address.pointer_type |= flags;
+ /* 1a) Get the location of the Extended BIOS Data Area (EBDA) */
- /* Get and validate the RSDT */
+ table_ptr = acpi_os_map_memory((acpi_physical_address)
+ ACPI_EBDA_PTR_LOCATION,
+ ACPI_EBDA_PTR_LENGTH);
+ if (!table_ptr) {
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ ACPI_EBDA_PTR_LOCATION, ACPI_EBDA_PTR_LENGTH));
- rsdt_info = ACPI_ALLOCATE_ZEROED(sizeof(struct acpi_table_desc));
- if (!rsdt_info) {
return_ACPI_STATUS(AE_NO_MEMORY);
}
- status = acpi_tb_get_table(&address, rsdt_info);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
-
- status = acpi_tb_validate_rsdt(rsdt_info->pointer);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
+ ACPI_MOVE_16_TO_32(&physical_address, table_ptr);
- /* Allocate a scratch table header and table descriptor */
+ /* Convert segment part to physical address */
- header = ACPI_ALLOCATE(sizeof(struct acpi_table_header));
- if (!header) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
+ physical_address <<= 4;
+ acpi_os_unmap_memory(table_ptr, ACPI_EBDA_PTR_LENGTH);
- table_info = ACPI_ALLOCATE(sizeof(struct acpi_table_desc));
- if (!table_info) {
- status = AE_NO_MEMORY;
- goto cleanup;
- }
+ /* EBDA present? */
- /* Get the number of table pointers within the RSDT */
-
- table_count =
- acpi_tb_get_table_count(acpi_gbl_RSDP, rsdt_info->pointer);
- address.pointer_type = acpi_gbl_table_flags | flags;
-
- /*
- * Search the RSDT/XSDT for the correct instance of the
- * requested table
- */
- for (i = 0, j = 0; i < table_count; i++) {
+ if (physical_address > 0x400) {
/*
- * Get the next table pointer, handle RSDT vs. XSDT
- * RSDT pointers are 32 bits, XSDT pointers are 64 bits
+ * 1b) Search EBDA paragraphs (EBDA is required to be a
+ * minimum of 1_k length)
*/
- if (acpi_gbl_root_table_type == ACPI_TABLE_TYPE_RSDT) {
- address.pointer.value =
- (ACPI_CAST_PTR
- (struct rsdt_descriptor,
- rsdt_info->pointer))->table_offset_entry[i];
- } else {
- address.pointer.value =
- (ACPI_CAST_PTR
- (struct xsdt_descriptor,
- rsdt_info->pointer))->table_offset_entry[i];
- }
-
- /* Get the table header */
+ table_ptr = acpi_os_map_memory((acpi_native_uint)
+ physical_address,
+ ACPI_EBDA_WINDOW_SIZE);
+ if (!table_ptr) {
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ physical_address, ACPI_EBDA_WINDOW_SIZE));
- status = acpi_tb_get_table_header(&address, header);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- /* Compare table signatures and table instance */
-
- if (ACPI_COMPARE_NAME(header->signature, signature)) {
-
- /* An instance of the table was found */
+ mem_rover =
+ acpi_tb_scan_memory_for_rsdp(table_ptr,
+ ACPI_EBDA_WINDOW_SIZE);
+ acpi_os_unmap_memory(table_ptr, ACPI_EBDA_WINDOW_SIZE);
- j++;
- if (j >= instance) {
+ if (mem_rover) {
- /* Found the correct instance, get the entire table */
+ /* Return the physical address */
- status =
- acpi_tb_get_table_body(&address, header,
- table_info);
- if (ACPI_FAILURE(status)) {
- goto cleanup;
- }
+ physical_address +=
+ (u32) ACPI_PTR_DIFF(mem_rover, table_ptr);
- *table_pointer = table_info->pointer;
- goto cleanup;
- }
+ *table_address = physical_address;
+ return_ACPI_STATUS(AE_OK);
}
}
- /* Did not find the table */
+ /*
+ * 2) Search upper memory: 16-byte boundaries in E0000h-FFFFFh
+ */
+ table_ptr = acpi_os_map_memory((acpi_physical_address)
+ ACPI_HI_RSDP_WINDOW_BASE,
+ ACPI_HI_RSDP_WINDOW_SIZE);
- status = AE_NOT_EXIST;
+ if (!table_ptr) {
+ ACPI_ERROR((AE_INFO,
+ "Could not map memory at %8.8X for length %X",
+ ACPI_HI_RSDP_WINDOW_BASE,
+ ACPI_HI_RSDP_WINDOW_SIZE));
- cleanup:
- if (rsdt_info->pointer) {
- acpi_os_unmap_memory(rsdt_info->pointer,
- (acpi_size) rsdt_info->pointer->length);
+ return_ACPI_STATUS(AE_NO_MEMORY);
}
- ACPI_FREE(rsdt_info);
- if (header) {
- ACPI_FREE(header);
- }
- if (table_info) {
- ACPI_FREE(table_info);
- }
- return_ACPI_STATUS(status);
-}
+ mem_rover =
+ acpi_tb_scan_memory_for_rsdp(table_ptr, ACPI_HI_RSDP_WINDOW_SIZE);
+ acpi_os_unmap_memory(table_ptr, ACPI_HI_RSDP_WINDOW_SIZE);
-ACPI_EXPORT_SYMBOL(acpi_get_firmware_table)
+ if (mem_rover) {
-/* TBD: Move to a new file */
-#if ACPI_MACHINE_WIDTH != 16
-/*******************************************************************************
- *
- * FUNCTION: acpi_find_root_pointer
- *
- * PARAMETERS: Flags - Logical/Physical addressing
- * rsdp_address - Where to place the RSDP address
- *
- * RETURN: Status, Physical address of the RSDP
- *
- * DESCRIPTION: Find the RSDP
- *
- ******************************************************************************/
-acpi_status acpi_find_root_pointer(u32 flags, struct acpi_pointer *rsdp_address)
-{
- struct acpi_table_desc table_info;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_find_root_pointer);
-
- /* Get the RSDP */
+ /* Return the physical address */
- status = acpi_tb_find_rsdp(&table_info, flags);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "RSDP structure not found - Flags=%X", flags));
+ physical_address = (u32)
+ (ACPI_HI_RSDP_WINDOW_BASE +
+ ACPI_PTR_DIFF(mem_rover, table_ptr));
- return_ACPI_STATUS(AE_NO_ACPI_TABLES);
+ *table_address = physical_address;
+ return_ACPI_STATUS(AE_OK);
}
- rsdp_address->pointer_type = ACPI_PHYSICAL_POINTER;
- rsdp_address->pointer.physical = table_info.physical_address;
- return_ACPI_STATUS(AE_OK);
+ /* A valid RSDP was not found */
+
+ ACPI_ERROR((AE_INFO, "A valid RSDP was not found"));
+ return_ACPI_STATUS(AE_NOT_FOUND);
}
ACPI_EXPORT_SYMBOL(acpi_find_root_pointer)
status =
acpi_tb_validate_rsdp(ACPI_CAST_PTR
- (struct rsdp_descriptor, mem_rover));
+ (struct acpi_table_rsdp, mem_rover));
if (ACPI_SUCCESS(status)) {
/* Sig and checksum valid, we have found a real RSDP */
start_address));
return_PTR(NULL);
}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_find_rsdp
- *
- * PARAMETERS: table_info - Where the table info is returned
- * Flags - Current memory mode (logical vs.
- * physical addressing)
- *
- * RETURN: Status, RSDP physical address
- *
- * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor
- * pointer structure. If it is found, set *RSDP to point to it.
- *
- * NOTE1: The RSDP must be either in the first 1_k of the Extended
- * BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
- * Only a 32-bit physical address is necessary.
- *
- * NOTE2: This function is always available, regardless of the
- * initialization state of the rest of ACPI.
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_tb_find_rsdp(struct acpi_table_desc *table_info, u32 flags)
-{
- u8 *table_ptr;
- u8 *mem_rover;
- u32 physical_address;
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(tb_find_rsdp);
-
- /*
- * Scan supports either logical addressing or physical addressing
- */
- if ((flags & ACPI_MEMORY_MODE) == ACPI_LOGICAL_ADDRESSING) {
-
- /* 1a) Get the location of the Extended BIOS Data Area (EBDA) */
-
- status = acpi_os_map_memory((acpi_physical_address)
- ACPI_EBDA_PTR_LOCATION,
- ACPI_EBDA_PTR_LENGTH,
- (void *)&table_ptr);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
- ACPI_EBDA_PTR_LOCATION,
- ACPI_EBDA_PTR_LENGTH));
-
- return_ACPI_STATUS(status);
- }
-
- ACPI_MOVE_16_TO_32(&physical_address, table_ptr);
-
- /* Convert segment part to physical address */
-
- physical_address <<= 4;
- acpi_os_unmap_memory(table_ptr, ACPI_EBDA_PTR_LENGTH);
-
- /* EBDA present? */
-
- if (physical_address > 0x400) {
- /*
- * 1b) Search EBDA paragraphs (EBDA is required to be a
- * minimum of 1_k length)
- */
- status = acpi_os_map_memory((acpi_physical_address)
- physical_address,
- ACPI_EBDA_WINDOW_SIZE,
- (void *)&table_ptr);
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
- physical_address,
- ACPI_EBDA_WINDOW_SIZE));
-
- return_ACPI_STATUS(status);
- }
-
- mem_rover = acpi_tb_scan_memory_for_rsdp(table_ptr,
- ACPI_EBDA_WINDOW_SIZE);
- acpi_os_unmap_memory(table_ptr, ACPI_EBDA_WINDOW_SIZE);
-
- if (mem_rover) {
-
- /* Return the physical address */
-
- physical_address +=
- (u32) ACPI_PTR_DIFF(mem_rover, table_ptr);
-
- table_info->physical_address =
- (acpi_physical_address) physical_address;
- return_ACPI_STATUS(AE_OK);
- }
- }
-
- /*
- * 2) Search upper memory: 16-byte boundaries in E0000h-FFFFFh
- */
- status = acpi_os_map_memory((acpi_physical_address)
- ACPI_HI_RSDP_WINDOW_BASE,
- ACPI_HI_RSDP_WINDOW_SIZE,
- (void *)&table_ptr);
-
- if (ACPI_FAILURE(status)) {
- ACPI_ERROR((AE_INFO,
- "Could not map memory at %8.8X for length %X",
- ACPI_HI_RSDP_WINDOW_BASE,
- ACPI_HI_RSDP_WINDOW_SIZE));
-
- return_ACPI_STATUS(status);
- }
-
- mem_rover =
- acpi_tb_scan_memory_for_rsdp(table_ptr,
- ACPI_HI_RSDP_WINDOW_SIZE);
- acpi_os_unmap_memory(table_ptr, ACPI_HI_RSDP_WINDOW_SIZE);
-
- if (mem_rover) {
-
- /* Return the physical address */
-
- physical_address = (u32)
- (ACPI_HI_RSDP_WINDOW_BASE +
- ACPI_PTR_DIFF(mem_rover, table_ptr));
-
- table_info->physical_address =
- (acpi_physical_address) physical_address;
- return_ACPI_STATUS(AE_OK);
- }
- }
-
- /*
- * Physical addressing
- */
- else {
- /* 1a) Get the location of the EBDA */
-
- ACPI_MOVE_16_TO_32(&physical_address, ACPI_EBDA_PTR_LOCATION);
- physical_address <<= 4; /* Convert segment to physical address */
-
- /* EBDA present? */
-
- if (physical_address > 0x400) {
- /*
- * 1b) Search EBDA paragraphs (EBDA is required to be a minimum of
- * 1_k length)
- */
- mem_rover =
- acpi_tb_scan_memory_for_rsdp(ACPI_PHYSADDR_TO_PTR
- (physical_address),
- ACPI_EBDA_WINDOW_SIZE);
- if (mem_rover) {
-
- /* Return the physical address */
-
- table_info->physical_address =
- ACPI_TO_INTEGER(mem_rover);
- return_ACPI_STATUS(AE_OK);
- }
- }
-
- /* 2) Search upper memory: 16-byte boundaries in E0000h-FFFFFh */
-
- mem_rover =
- acpi_tb_scan_memory_for_rsdp(ACPI_PHYSADDR_TO_PTR
- (ACPI_HI_RSDP_WINDOW_BASE),
- ACPI_HI_RSDP_WINDOW_SIZE);
- if (mem_rover) {
-
- /* Found it, return the physical address */
-
- table_info->physical_address =
- ACPI_TO_INTEGER(mem_rover);
- return_ACPI_STATUS(AE_OK);
- }
- }
-
- /* A valid RSDP was not found */
-
- ACPI_ERROR((AE_INFO, "No valid RSDP was found"));
- return_ACPI_STATUS(AE_NOT_FOUND);
-}
-
-#endif
static int acpi_thermal_add(struct acpi_device *device);
static int acpi_thermal_remove(struct acpi_device *device, int type);
-static int acpi_thermal_resume(struct acpi_device *device, int state);
+static int acpi_thermal_resume(struct acpi_device *device);
static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file);
static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file);
return 0;
}
-static int acpi_thermal_resume(struct acpi_device *device, int state)
+static int acpi_thermal_resume(struct acpi_device *device)
{
struct acpi_thermal *tz = NULL;
int i;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*/
#include <acpi/acpi.h>
+#include <acpi/acdebug.h>
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utalloc")
acpi_status acpi_ut_delete_caches(void)
{
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ char buffer[7];
+
+ if (acpi_gbl_display_final_mem_stats) {
+ ACPI_STRCPY(buffer, "MEMORY");
+ acpi_db_display_statistics(buffer);
+ }
+#endif
(void)acpi_os_delete_cache(acpi_gbl_namespace_cache);
acpi_gbl_namespace_cache = NULL;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_MEM_TRACKING(cache->total_allocated++);
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ if ((cache->total_allocated - cache->total_freed) >
+ cache->max_occupied) {
+ cache->max_occupied =
+ cache->total_allocated - cache->total_freed;
+ }
+#endif
+
/* Avoid deadlock with ACPI_ALLOCATE_ZEROED */
status = acpi_ut_release_mutex(ACPI_MTX_CACHES);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_ut_add_reference(source_desc->reference.object);
break;
+ case ACPI_TYPE_REGION:
+ /*
+ * We copied the Region Handler, so we now must add a reference
+ */
+ if (dest_desc->region.handler) {
+ acpi_ut_add_reference(dest_desc->region.handler);
+ }
+ break;
+
default:
/* Nothing to do for other simple objects */
break;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
if (ACPI_LV_THREADS & acpi_dbg_level) {
acpi_os_printf
("\n**** Context Switch from TID %lX to TID %lX ****\n\n",
- (unsigned long) acpi_gbl_prev_thread_id,
- (unsigned long) thread_id);
+ (unsigned long)acpi_gbl_prev_thread_id, (unsigned long)thread_id);
}
acpi_gbl_prev_thread_id = thread_id;
acpi_os_printf("%8s-%04ld ", module_name, line_number);
if (ACPI_LV_THREADS & acpi_dbg_level) {
- acpi_os_printf("[%04lX] ", thread_id);
+ acpi_os_printf("[%04lX] ", (unsigned long)thread_id);
}
acpi_os_printf("[%02ld] %-22.22s: ",
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
"***** Mutex %p, OS Mutex %p\n",
object, object->mutex.os_mutex));
- if (object->mutex.os_mutex != ACPI_GLOBAL_LOCK) {
- acpi_ex_unlink_mutex(object);
- acpi_os_delete_mutex(object->mutex.os_mutex);
- } else {
- /* Global Lock "mutex" is actually a counting semaphore */
+ if (object->mutex.os_mutex == acpi_gbl_global_lock_mutex) {
+
+ /* Global Lock has extra semaphore */
(void)
acpi_os_delete_semaphore
(acpi_gbl_global_lock_semaphore);
acpi_gbl_global_lock_semaphore = NULL;
+
+ acpi_os_delete_mutex(object->mutex.os_mutex);
+ acpi_gbl_global_lock_mutex = NULL;
+ } else {
+ acpi_ex_unlink_mutex(object);
+ acpi_os_delete_mutex(object->mutex.os_mutex);
}
break;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
+ACPI_EXPORT_SYMBOL(acpi_gbl_FADT)
#define _COMPONENT ACPI_UTILITIES
-ACPI_MODULE_NAME("utglobal")
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_format_exception
- *
- * PARAMETERS: Status - The acpi_status code to be formatted
- *
- * RETURN: A string containing the exception text. A valid pointer is
- * always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string.
- *
- ******************************************************************************/
-const char *acpi_format_exception(acpi_status status)
-{
- acpi_status sub_status;
- const char *exception = NULL;
-
- ACPI_FUNCTION_ENTRY();
-
- /*
- * Status is composed of two parts, a "type" and an actual code
- */
- sub_status = (status & ~AE_CODE_MASK);
-
- switch (status & AE_CODE_MASK) {
- case AE_CODE_ENVIRONMENTAL:
-
- if (sub_status <= AE_CODE_ENV_MAX) {
- exception = acpi_gbl_exception_names_env[sub_status];
- }
- break;
-
- case AE_CODE_PROGRAMMER:
-
- if (sub_status <= AE_CODE_PGM_MAX) {
- exception =
- acpi_gbl_exception_names_pgm[sub_status - 1];
- }
- break;
-
- case AE_CODE_ACPI_TABLES:
-
- if (sub_status <= AE_CODE_TBL_MAX) {
- exception =
- acpi_gbl_exception_names_tbl[sub_status - 1];
- }
- break;
-
- case AE_CODE_AML:
-
- if (sub_status <= AE_CODE_AML_MAX) {
- exception =
- acpi_gbl_exception_names_aml[sub_status - 1];
- }
- break;
-
- case AE_CODE_CONTROL:
-
- if (sub_status <= AE_CODE_CTRL_MAX) {
- exception =
- acpi_gbl_exception_names_ctrl[sub_status - 1];
- }
- break;
-
- default:
- break;
- }
-
- if (!exception) {
-
- /* Exception code was not recognized */
-
- ACPI_ERROR((AE_INFO,
- "Unknown exception code: 0x%8.8X", status));
-
- exception = "UNKNOWN_STATUS_CODE";
- }
-
- return (ACPI_CAST_PTR(const char, exception));
-}
+ ACPI_MODULE_NAME("utglobal")
/*******************************************************************************
*
u8 acpi_gbl_shutdown = TRUE;
-const u8 acpi_gbl_decode_to8bit[8] = { 1, 2, 4, 8, 16, 32, 64, 128 };
-
const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT] = {
"\\_S0_",
"\\_S1_",
/*******************************************************************************
*
- * Namespace globals
+ * FUNCTION: acpi_format_exception
+ *
+ * PARAMETERS: Status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. A valid pointer is
+ * always returned.
+ *
+ * DESCRIPTION: This function translates an ACPI exception into an ASCII string
+ * It is here instead of utxface.c so it is always present.
*
******************************************************************************/
+const char *acpi_format_exception(acpi_status status)
+{
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ exception = acpi_ut_validate_exception(status);
+ if (!exception) {
+
+ /* Exception code was not recognized */
+
+ ACPI_ERROR((AE_INFO,
+ "Unknown exception code: 0x%8.8X", status));
+
+ exception = "UNKNOWN_STATUS_CODE";
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
+ACPI_EXPORT_SYMBOL(acpi_format_exception)
+
+/*******************************************************************************
+ *
+ * Namespace globals
+ *
+ ******************************************************************************/
/*
* Predefined ACPI Names (Built-in to the Interpreter)
*
return (acpi_gbl_hex_to_ascii[(integer >> position) & 0xF]);
}
-/*******************************************************************************
- *
- * Table name globals
- *
- * NOTE: This table includes ONLY the ACPI tables that the subsystem consumes.
- * it is NOT an exhaustive list of all possible ACPI tables. All ACPI tables
- * that are not used by the subsystem are simply ignored.
- *
- * Do NOT add any table to this list that is not consumed directly by this
- * subsystem (No MADT, ECDT, SBST, etc.)
- *
- ******************************************************************************/
-
-struct acpi_table_list acpi_gbl_table_lists[ACPI_TABLE_ID_MAX + 1];
-
-struct acpi_table_support acpi_gbl_table_data[ACPI_TABLE_ID_MAX + 1] = {
- /*********** Name, Signature, Global typed pointer Signature size, Type How many allowed?, Contains valid AML? */
-
- /* RSDP 0 */ {RSDP_NAME, RSDP_SIG, NULL, sizeof(RSDP_SIG) - 1,
- ACPI_TABLE_ROOT | ACPI_TABLE_SINGLE}
- ,
- /* DSDT 1 */ {DSDT_SIG, DSDT_SIG, (void *)&acpi_gbl_DSDT,
- sizeof(DSDT_SIG) - 1,
- ACPI_TABLE_SECONDARY | ACPI_TABLE_SINGLE |
- ACPI_TABLE_EXECUTABLE}
- ,
- /* FADT 2 */ {FADT_SIG, FADT_SIG, (void *)&acpi_gbl_FADT,
- sizeof(FADT_SIG) - 1,
- ACPI_TABLE_PRIMARY | ACPI_TABLE_SINGLE}
- ,
- /* FACS 3 */ {FACS_SIG, FACS_SIG, (void *)&acpi_gbl_FACS,
- sizeof(FACS_SIG) - 1,
- ACPI_TABLE_SECONDARY | ACPI_TABLE_SINGLE}
- ,
- /* PSDT 4 */ {PSDT_SIG, PSDT_SIG, NULL, sizeof(PSDT_SIG) - 1,
- ACPI_TABLE_PRIMARY | ACPI_TABLE_MULTIPLE |
- ACPI_TABLE_EXECUTABLE}
- ,
- /* SSDT 5 */ {SSDT_SIG, SSDT_SIG, NULL, sizeof(SSDT_SIG) - 1,
- ACPI_TABLE_PRIMARY | ACPI_TABLE_MULTIPLE |
- ACPI_TABLE_EXECUTABLE}
- ,
- /* XSDT 6 */ {XSDT_SIG, XSDT_SIG, NULL, sizeof(RSDT_SIG) - 1,
- ACPI_TABLE_ROOT | ACPI_TABLE_SINGLE}
- ,
-};
-
/******************************************************************************
*
* Event and Hardware globals
/* Name must be a valid ACPI name */
if (!acpi_ut_valid_acpi_name(node->name.integer)) {
- node->name.integer = acpi_ut_repair_name(node->name.integer);
+ node->name.integer = acpi_ut_repair_name(node->name.ascii);
}
/* Return the name */
return;
}
- /* ACPI table structure */
-
- for (i = 0; i < (ACPI_TABLE_ID_MAX + 1); i++) {
- acpi_gbl_table_lists[i].next = NULL;
- acpi_gbl_table_lists[i].count = 0;
- }
-
/* Mutex locked flags */
for (i = 0; i < ACPI_NUM_MUTEX; i++) {
/* GPE support */
+ acpi_gpe_count = 0;
acpi_gbl_gpe_xrupt_list_head = NULL;
acpi_gbl_gpe_fadt_blocks[0] = NULL;
acpi_gbl_gpe_fadt_blocks[1] = NULL;
acpi_gbl_exception_handler = NULL;
acpi_gbl_init_handler = NULL;
- /* Global "typed" ACPI table pointers */
-
- acpi_gbl_RSDP = NULL;
- acpi_gbl_XSDT = NULL;
- acpi_gbl_FACS = NULL;
- acpi_gbl_FADT = NULL;
- acpi_gbl_DSDT = NULL;
-
/* Global Lock support */
acpi_gbl_global_lock_semaphore = NULL;
+ acpi_gbl_global_lock_mutex = NULL;
acpi_gbl_global_lock_acquired = FALSE;
- acpi_gbl_global_lock_thread_count = 0;
acpi_gbl_global_lock_handle = 0;
/* Miscellaneous variables */
- acpi_gbl_table_flags = ACPI_PHYSICAL_POINTER;
- acpi_gbl_rsdp_original_location = 0;
acpi_gbl_cm_single_step = FALSE;
acpi_gbl_db_terminate_threads = FALSE;
acpi_gbl_shutdown = FALSE;
acpi_gbl_lowest_stack_pointer = ACPI_SIZE_MAX;
#endif
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+ acpi_gbl_display_final_mem_stats = FALSE;
+#endif
+
return_VOID;
}
ACPI_EXPORT_SYMBOL(acpi_dbg_level)
ACPI_EXPORT_SYMBOL(acpi_dbg_layer)
+ACPI_EXPORT_SYMBOL(acpi_gpe_count)
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#include <acpi/acevents.h>
+#include <acpi/actables.h>
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utinit")
/* Local prototypes */
-static void
-acpi_ut_fadt_register_error(char *register_name, u32 value, u8 offset);
-
static void acpi_ut_terminate(void);
-/*******************************************************************************
- *
- * FUNCTION: acpi_ut_fadt_register_error
- *
- * PARAMETERS: register_name - Pointer to string identifying register
- * Value - Actual register contents value
- * Offset - Byte offset in the FADT
- *
- * RETURN: AE_BAD_VALUE
- *
- * DESCRIPTION: Display failure message
- *
- ******************************************************************************/
-
-static void
-acpi_ut_fadt_register_error(char *register_name, u32 value, u8 offset)
-{
-
- ACPI_WARNING((AE_INFO,
- "Invalid FADT value %s=%X at offset %X FADT=%p",
- register_name, value, offset, acpi_gbl_FADT));
-}
-
-/******************************************************************************
- *
- * FUNCTION: acpi_ut_validate_fadt
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Validate various ACPI registers in the FADT
- *
- ******************************************************************************/
-
-acpi_status acpi_ut_validate_fadt(void)
-{
-
- /*
- * Verify Fixed ACPI Description Table fields,
- * but don't abort on any problems, just display error
- */
- if (acpi_gbl_FADT->pm1_evt_len < 4) {
- acpi_ut_fadt_register_error("PM1_EVT_LEN",
- (u32) acpi_gbl_FADT->pm1_evt_len,
- ACPI_FADT_OFFSET(pm1_evt_len));
- }
-
- if (!acpi_gbl_FADT->pm1_cnt_len) {
- acpi_ut_fadt_register_error("PM1_CNT_LEN", 0,
- ACPI_FADT_OFFSET(pm1_cnt_len));
- }
-
- if (!acpi_gbl_FADT->xpm1a_evt_blk.address) {
- acpi_ut_fadt_register_error("X_PM1a_EVT_BLK", 0,
- ACPI_FADT_OFFSET(xpm1a_evt_blk.
- address));
- }
-
- if (!acpi_gbl_FADT->xpm1a_cnt_blk.address) {
- acpi_ut_fadt_register_error("X_PM1a_CNT_BLK", 0,
- ACPI_FADT_OFFSET(xpm1a_cnt_blk.
- address));
- }
-
- if (!acpi_gbl_FADT->xpm_tmr_blk.address) {
- acpi_ut_fadt_register_error("X_PM_TMR_BLK", 0,
- ACPI_FADT_OFFSET(xpm_tmr_blk.
- address));
- }
-
- if ((acpi_gbl_FADT->xpm2_cnt_blk.address &&
- !acpi_gbl_FADT->pm2_cnt_len)) {
- acpi_ut_fadt_register_error("PM2_CNT_LEN",
- (u32) acpi_gbl_FADT->pm2_cnt_len,
- ACPI_FADT_OFFSET(pm2_cnt_len));
- }
-
- if (acpi_gbl_FADT->pm_tm_len < 4) {
- acpi_ut_fadt_register_error("PM_TM_LEN",
- (u32) acpi_gbl_FADT->pm_tm_len,
- ACPI_FADT_OFFSET(pm_tm_len));
- }
-
- /* Length of GPE blocks must be a multiple of 2 */
-
- if (acpi_gbl_FADT->xgpe0_blk.address &&
- (acpi_gbl_FADT->gpe0_blk_len & 1)) {
- acpi_ut_fadt_register_error("(x)GPE0_BLK_LEN",
- (u32) acpi_gbl_FADT->gpe0_blk_len,
- ACPI_FADT_OFFSET(gpe0_blk_len));
- }
-
- if (acpi_gbl_FADT->xgpe1_blk.address &&
- (acpi_gbl_FADT->gpe1_blk_len & 1)) {
- acpi_ut_fadt_register_error("(x)GPE1_BLK_LEN",
- (u32) acpi_gbl_FADT->gpe1_blk_len,
- ACPI_FADT_OFFSET(gpe1_blk_len));
- }
-
- return (AE_OK);
-}
-
/******************************************************************************
*
* FUNCTION: acpi_ut_terminate
ACPI_FUNCTION_TRACE(ut_terminate);
- /* Free global tables, etc. */
/* Free global GPE blocks and related info structures */
gpe_xrupt_info = acpi_gbl_gpe_xrupt_list_head;
acpi_ns_terminate();
+ /* Delete the ACPI tables */
+
+ acpi_tb_terminate();
+
/* Close the globals */
acpi_ut_terminate();
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utmisc")
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_exception
+ *
+ * PARAMETERS: Status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. NULL if exception is
+ * not valid.
+ *
+ * DESCRIPTION: This function validates and translates an ACPI exception into
+ * an ASCII string.
+ *
+ ******************************************************************************/
+const char *acpi_ut_validate_exception(acpi_status status)
+{
+ acpi_status sub_status;
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
+ sub_status = (status & ~AE_CODE_MASK);
+
+ switch (status & AE_CODE_MASK) {
+ case AE_CODE_ENVIRONMENTAL:
+
+ if (sub_status <= AE_CODE_ENV_MAX) {
+ exception = acpi_gbl_exception_names_env[sub_status];
+ }
+ break;
+
+ case AE_CODE_PROGRAMMER:
+
+ if (sub_status <= AE_CODE_PGM_MAX) {
+ exception =
+ acpi_gbl_exception_names_pgm[sub_status - 1];
+ }
+ break;
+
+ case AE_CODE_ACPI_TABLES:
+
+ if (sub_status <= AE_CODE_TBL_MAX) {
+ exception =
+ acpi_gbl_exception_names_tbl[sub_status - 1];
+ }
+ break;
+
+ case AE_CODE_AML:
+
+ if (sub_status <= AE_CODE_AML_MAX) {
+ exception =
+ acpi_gbl_exception_names_aml[sub_status - 1];
+ }
+ break;
+
+ case AE_CODE_CONTROL:
+
+ if (sub_status <= AE_CODE_CTRL_MAX) {
+ exception =
+ acpi_gbl_exception_names_ctrl[sub_status - 1];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_ut_is_aml_table
* data tables that do not contain AML code.
*
******************************************************************************/
+
u8 acpi_ut_is_aml_table(struct acpi_table_header *table)
{
/* These are the only tables that contain executable AML */
- if (ACPI_COMPARE_NAME(table->signature, DSDT_SIG) ||
- ACPI_COMPARE_NAME(table->signature, PSDT_SIG) ||
- ACPI_COMPARE_NAME(table->signature, SSDT_SIG)) {
+ if (ACPI_COMPARE_NAME(table->signature, ACPI_SIG_DSDT) ||
+ ACPI_COMPARE_NAME(table->signature, ACPI_SIG_PSDT) ||
+ ACPI_COMPARE_NAME(table->signature, ACPI_SIG_SSDT)) {
return (TRUE);
}
void acpi_ut_set_integer_width(u8 revision)
{
- if (revision <= 1) {
+ if (revision < 2) {
/* 32-bit case */
*
******************************************************************************/
-acpi_name acpi_ut_repair_name(acpi_name name)
+acpi_name acpi_ut_repair_name(char *name)
{
- char *name_ptr = ACPI_CAST_PTR(char, &name);
- char new_name[ACPI_NAME_SIZE];
acpi_native_uint i;
+ char new_name[ACPI_NAME_SIZE];
for (i = 0; i < ACPI_NAME_SIZE; i++) {
- new_name[i] = name_ptr[i];
+ new_name[i] = name[i];
/*
* Replace a bad character with something printable, yet technically
* still invalid. This prevents any collisions with existing "good"
* names in the namespace.
*/
- if (!acpi_ut_valid_acpi_char(name_ptr[i], i)) {
+ if (!acpi_ut_valid_acpi_char(name[i], i)) {
new_name[i] = '*';
}
}
- return (*ACPI_CAST_PTR(u32, new_name));
+ return (*(u32 *) new_name);
}
/*******************************************************************************
{
va_list args;
- acpi_os_printf("ACPI (%s-%04d): ", module_name, line_number);
+ /*
+ * Removed module_name, line_number, and acpica version, not needed
+ * for info output
+ */
+ acpi_os_printf("ACPI: ");
va_start(args, format);
acpi_os_vprintf(format, args);
- acpi_os_printf(" [%X]\n", ACPI_CA_VERSION);
+ acpi_os_printf("\n");
}
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
******************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
ACPI_FUNCTION_TRACE(acpi_initialize_subsystem);
+ acpi_gbl_startup_flags = ACPI_SUBSYSTEM_INITIALIZE;
ACPI_DEBUG_EXEC(acpi_ut_init_stack_ptr_trace());
/* Initialize the OS-Dependent layer */
ACPI_FUNCTION_TRACE(acpi_enable_subsystem);
- /*
- * We must initialize the hardware before we can enable ACPI.
- * The values from the FADT are validated here.
- */
- if (!(flags & ACPI_NO_HARDWARE_INIT)) {
- ACPI_DEBUG_PRINT((ACPI_DB_EXEC,
- "[Init] Initializing ACPI hardware\n"));
-
- status = acpi_hw_initialize();
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
- }
-
/* Enable ACPI mode */
if (!(flags & ACPI_NO_ACPI_ENABLE)) {
{
struct acpi_system_info *info_ptr;
acpi_status status;
- u32 i;
ACPI_FUNCTION_TRACE(acpi_get_system_info);
/* Timer resolution - 24 or 32 bits */
- if (!acpi_gbl_FADT) {
- info_ptr->timer_resolution = 0;
- } else if (acpi_gbl_FADT->tmr_val_ext == 0) {
+ if (acpi_gbl_FADT.flags & ACPI_FADT_32BIT_TIMER) {
info_ptr->timer_resolution = 24;
} else {
info_ptr->timer_resolution = 32;
info_ptr->debug_layer = acpi_dbg_layer;
info_ptr->debug_level = acpi_dbg_level;
- /* Current status of the ACPI tables, per table type */
-
- info_ptr->num_table_types = ACPI_TABLE_ID_MAX + 1;
- for (i = 0; i < (ACPI_TABLE_ID_MAX + 1); i++) {
- info_ptr->table_info[i].count = acpi_gbl_table_lists[i].count;
- }
-
return_ACPI_STATUS(AE_OK);
}
#include <linux/proc_fs.h>
#include <linux/seq_file.h>
+#include <linux/backlight.h>
#include <asm/uaccess.h>
#include <acpi/acpi_bus.h>
#define ACPI_VIDEO_HEAD_INVALID (~0u - 1)
#define ACPI_VIDEO_HEAD_END (~0u)
+#define MAX_NAME_LEN 20
+
+#define ACPI_VIDEO_DISPLAY_CRT 1
+#define ACPI_VIDEO_DISPLAY_TV 2
+#define ACPI_VIDEO_DISPLAY_DVI 3
+#define ACPI_VIDEO_DISPLAY_LCD 4
#define _COMPONENT ACPI_VIDEO_COMPONENT
ACPI_MODULE_NAME("acpi_video")
static int acpi_video_bus_add(struct acpi_device *device);
static int acpi_video_bus_remove(struct acpi_device *device, int type);
-static int acpi_video_bus_match(struct acpi_device *device,
- struct acpi_driver *driver);
static struct acpi_driver acpi_video_bus = {
.name = ACPI_VIDEO_DRIVER_NAME,
.class = ACPI_VIDEO_CLASS,
+ .ids = ACPI_VIDEO_HID,
.ops = {
.add = acpi_video_bus_add,
.remove = acpi_video_bus_remove,
- .match = acpi_video_bus_match,
},
};
u8 crt:1;
u8 lcd:1;
u8 tvout:1;
+ u8 dvi:1;
u8 bios:1;
u8 unknown:1;
- u8 reserved:3;
+ u8 reserved:2;
};
struct acpi_video_device_cap {
u8 _ADR:1; /*Return the unique ID */
u8 _BCL:1; /*Query list of brightness control levels supported */
u8 _BCM:1; /*Set the brightness level */
+ u8 _BQC:1; /* Get current brightness level */
u8 _DDC:1; /*Return the EDID for this device */
u8 _DCS:1; /*Return status of output device */
u8 _DGS:1; /*Query graphics state */
u8 _DSS:1; /*Device state set */
- u8 _reserved:1;
};
struct acpi_video_device_brightness {
struct acpi_video_bus *video;
struct acpi_device *dev;
struct acpi_video_device_brightness *brightness;
+ struct backlight_device *backlight;
+ struct backlight_properties *data;
};
/* bus */
struct acpi_video_device *device);
static int acpi_video_device_enumerate(struct acpi_video_bus *video);
static int acpi_video_switch_output(struct acpi_video_bus *video, int event);
+static int acpi_video_device_lcd_set_level(struct acpi_video_device *device,
+ int level);
+static int acpi_video_device_lcd_get_level_current(
+ struct acpi_video_device *device,
+ unsigned long *level);
static int acpi_video_get_next_level(struct acpi_video_device *device,
u32 level_current, u32 event);
static void acpi_video_switch_brightness(struct acpi_video_device *device,
int event);
+/*backlight device sysfs support*/
+static int acpi_video_get_brightness(struct backlight_device *bd)
+{
+ unsigned long cur_level;
+ struct acpi_video_device *vd =
+ (struct acpi_video_device *)class_get_devdata(&bd->class_dev);
+ acpi_video_device_lcd_get_level_current(vd, &cur_level);
+ return (int) cur_level;
+}
+
+static int acpi_video_set_brightness(struct backlight_device *bd)
+{
+ int request_level = bd->props->brightness;
+ struct acpi_video_device *vd =
+ (struct acpi_video_device *)class_get_devdata(&bd->class_dev);
+ acpi_video_device_lcd_set_level(vd, request_level);
+ return 0;
+}
+
/* --------------------------------------------------------------------------
Video Management
-------------------------------------------------------------------------- */
acpi_integer status;
acpi_handle h_dummy1;
int i;
+ u32 max_level = 0;
union acpi_object *obj = NULL;
struct acpi_video_device_brightness *br = NULL;
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_BCM", &h_dummy1))) {
device->cap._BCM = 1;
}
+ if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle,"_BQC",&h_dummy1)))
+ device->cap._BQC = 1;
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
device->cap._DDC = 1;
}
continue;
}
br->levels[count] = (u32) o->integer.value;
+ if (br->levels[count] > max_level)
+ max_level = br->levels[count];
count++;
}
out:
kfree(obj);
+ if (device->cap._BCL && device->cap._BCM && device->cap._BQC){
+ unsigned long tmp;
+ static int count = 0;
+ char *name;
+ struct backlight_properties *acpi_video_data;
+
+ name = kzalloc(MAX_NAME_LEN, GFP_KERNEL);
+ if (!name)
+ return;
+
+ acpi_video_data = kzalloc(
+ sizeof(struct backlight_properties),
+ GFP_KERNEL);
+ if (!acpi_video_data){
+ kfree(name);
+ return;
+ }
+ acpi_video_data->owner = THIS_MODULE;
+ acpi_video_data->get_brightness =
+ acpi_video_get_brightness;
+ acpi_video_data->update_status =
+ acpi_video_set_brightness;
+ sprintf(name, "acpi_video%d", count++);
+ device->data = acpi_video_data;
+ acpi_video_data->max_brightness = max_level;
+ acpi_video_device_lcd_get_level_current(device, &tmp);
+ acpi_video_data->brightness = (int)tmp;
+ device->backlight = backlight_device_register(name,
+ NULL, device, acpi_video_data);
+ kfree(name);
+ }
return;
}
seq_printf(seq, "LCD\n");
else if (dev->flags.tvout)
seq_printf(seq, "TVOUT\n");
+ else if (dev->flags.dvi)
+ seq_printf(seq, "DVI\n");
else
seq_printf(seq, "UNKNOWN\n");
-------------------------------------------------------------------------- */
/* device interface */
+static struct acpi_video_device_attrib*
+acpi_video_get_device_attr(struct acpi_video_bus *video, unsigned long device_id)
+{
+ int count;
+
+ for(count = 0; count < video->attached_count; count++)
+ if((video->attached_array[count].value.int_val & 0xffff) == device_id)
+ return &(video->attached_array[count].value.attrib);
+ return NULL;
+}
static int
acpi_video_bus_get_one_device(struct acpi_device *device,
unsigned long device_id;
int status;
struct acpi_video_device *data;
-
+ struct acpi_video_device_attrib* attribute;
if (!device || !video)
return -EINVAL;
data->video = video;
data->dev = device;
- switch (device_id & 0xffff) {
- case 0x0100:
- data->flags.crt = 1;
- break;
- case 0x0400:
- data->flags.lcd = 1;
- break;
- case 0x0200:
- data->flags.tvout = 1;
- break;
- default:
+ attribute = acpi_video_get_device_attr(video, device_id);
+
+ if((attribute != NULL) && attribute->device_id_scheme) {
+ switch (attribute->display_type) {
+ case ACPI_VIDEO_DISPLAY_CRT:
+ data->flags.crt = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_TV:
+ data->flags.tvout = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_DVI:
+ data->flags.dvi = 1;
+ break;
+ case ACPI_VIDEO_DISPLAY_LCD:
+ data->flags.lcd = 1;
+ break;
+ default:
+ data->flags.unknown = 1;
+ break;
+ }
+ if(attribute->bios_can_detect)
+ data->flags.bios = 1;
+ } else
data->flags.unknown = 1;
- break;
- }
acpi_video_device_bind(video, data);
acpi_video_device_find_cap(data);
status = acpi_remove_notify_handler(device->dev->handle,
ACPI_DEVICE_NOTIFY,
acpi_video_device_notify);
-
+ if (device->backlight){
+ backlight_device_unregister(device->backlight);
+ kfree(device->data);
+ }
return 0;
}
return 0;
}
-static int
-acpi_video_bus_match(struct acpi_device *device, struct acpi_driver *driver)
-{
- acpi_handle h_dummy1;
- acpi_handle h_dummy2;
- acpi_handle h_dummy3;
-
-
- if (!device || !driver)
- return -EINVAL;
-
- /* Since there is no HID, CID for ACPI Video drivers, we have
- * to check well known required nodes for each feature we support.
- */
-
- /* Does this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy2)))
- return 0;
-
- /* Does this device able to retrieve a video ROM ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy1)))
- return 0;
-
- /* Does this device able to configure which video head to be POSTed ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_VPO", &h_dummy1)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_GPD", &h_dummy2)) &&
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_SPD", &h_dummy3)))
- return 0;
-
- return -ENODEV;
-}
-
static int __init acpi_video_init(void)
{
int result = 0;
class_name = kmalloc(size, GFP_KERNEL);
if (!class_name)
- return ERR_PTR(-ENOMEM);
+ return NULL;
strcpy(class_name, name);
strcat(class_name, ":");
return 0;
class_name = make_class_name(class_dev->class->name, &class_dev->kobj);
- error = sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
- class_name);
+ if (class_name)
+ error = sysfs_create_link(&class_dev->dev->kobj,
+ &class_dev->kobj, class_name);
+ else
+ error = -ENOMEM;
kfree(class_name);
return error;
}
return;
class_name = make_class_name(class_dev->class->name, &class_dev->kobj);
- sysfs_remove_link(&class_dev->dev->kobj, class_name);
+ if (class_name)
+ sysfs_remove_link(&class_dev->dev->kobj, class_name);
kfree(class_name);
}
#else
if (class_dev->dev) {
new_class_name = make_class_name(class_dev->class->name,
&class_dev->kobj);
- sysfs_create_link(&class_dev->dev->kobj, &class_dev->kobj,
- new_class_name);
- sysfs_remove_link(&class_dev->dev->kobj, old_class_name);
+ if (new_class_name)
+ sysfs_create_link(&class_dev->dev->kobj,
+ &class_dev->kobj, new_class_name);
+ if (old_class_name)
+ sysfs_remove_link(&class_dev->dev->kobj,
+ old_class_name);
}
#endif
class_device_put(class_dev);
if (dev->release)
dev->release(dev);
+ else if (dev->type && dev->type->release)
+ dev->type->release(dev);
else if (dev->class && dev->class->dev_release)
dev->class->dev_release(dev);
else {
"MINOR=%u", MINOR(dev->devt));
}
-#ifdef CONFIG_SYSFS_DEPRECATED
- /* add bus name (same as SUBSYSTEM, deprecated) */
- if (dev->bus)
- add_uevent_var(envp, num_envp, &i,
- buffer, buffer_size, &length,
- "PHYSDEVBUS=%s", dev->bus->name);
-#endif
-
- /* add driver name (PHYSDEV* values are deprecated)*/
- if (dev->driver) {
+ if (dev->driver)
add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
"DRIVER=%s", dev->driver->name);
+
#ifdef CONFIG_SYSFS_DEPRECATED
+ if (dev->class) {
+ struct device *parent = dev->parent;
+
+ /* find first bus device in parent chain */
+ while (parent && !parent->bus)
+ parent = parent->parent;
+ if (parent && parent->bus) {
+ const char *path;
+
+ path = kobject_get_path(&parent->kobj, GFP_KERNEL);
+ add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "PHYSDEVPATH=%s", path);
+ kfree(path);
+
+ add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "PHYSDEVBUS=%s", parent->bus->name);
+
+ if (parent->driver)
+ add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "PHYSDEVDRIVER=%s", parent->driver->name);
+ }
+ } else if (dev->bus) {
add_uevent_var(envp, num_envp, &i,
buffer, buffer_size, &length,
- "PHYSDEVDRIVER=%s", dev->driver->name);
-#endif
+ "PHYSDEVBUS=%s", dev->bus->name);
+
+ if (dev->driver)
+ add_uevent_var(envp, num_envp, &i,
+ buffer, buffer_size, &length,
+ "PHYSDEVDRIVER=%s", dev->driver->name);
}
+#endif
/* terminate, set to next free slot, shrink available space */
envp[i] = NULL;
if (dev->bus && dev->bus->uevent) {
/* have the bus specific function add its stuff */
retval = dev->bus->uevent(dev, envp, num_envp, buffer, buffer_size);
- if (retval) {
- pr_debug ("%s - uevent() returned %d\n",
+ if (retval)
+ pr_debug ("%s: bus uevent() returned %d\n",
__FUNCTION__, retval);
- }
}
if (dev->class && dev->class->dev_uevent) {
/* have the class specific function add its stuff */
retval = dev->class->dev_uevent(dev, envp, num_envp, buffer, buffer_size);
- if (retval) {
- pr_debug("%s - dev_uevent() returned %d\n",
- __FUNCTION__, retval);
- }
+ if (retval)
+ pr_debug("%s: class uevent() returned %d\n",
+ __FUNCTION__, retval);
+ }
+
+ if (dev->type && dev->type->uevent) {
+ /* have the device type specific fuction add its stuff */
+ retval = dev->type->uevent(dev, envp, num_envp, buffer, buffer_size);
+ if (retval)
+ pr_debug("%s: dev_type uevent() returned %d\n",
+ __FUNCTION__, retval);
}
return retval;
static int device_add_attrs(struct device *dev)
{
struct class *class = dev->class;
+ struct device_type *type = dev->type;
int error = 0;
int i;
- if (!class)
- return 0;
-
- if (class->dev_attrs) {
+ if (class && class->dev_attrs) {
for (i = 0; attr_name(class->dev_attrs[i]); i++) {
error = device_create_file(dev, &class->dev_attrs[i]);
if (error)
break;
}
+ if (error)
+ while (--i >= 0)
+ device_remove_file(dev, &class->dev_attrs[i]);
}
- if (error)
- while (--i >= 0)
- device_remove_file(dev, &class->dev_attrs[i]);
+
+ if (type && type->attrs) {
+ for (i = 0; attr_name(type->attrs[i]); i++) {
+ error = device_create_file(dev, &type->attrs[i]);
+ if (error)
+ break;
+ }
+ if (error)
+ while (--i >= 0)
+ device_remove_file(dev, &type->attrs[i]);
+ }
+
return error;
}
static void device_remove_attrs(struct device *dev)
{
struct class *class = dev->class;
+ struct device_type *type = dev->type;
int i;
- if (!class)
- return;
-
- if (class->dev_attrs) {
+ if (class && class->dev_attrs) {
for (i = 0; attr_name(class->dev_attrs[i]); i++)
device_remove_file(dev, &class->dev_attrs[i]);
}
+
+ if (type && type->attrs) {
+ for (i = 0; attr_name(type->attrs[i]); i++)
+ device_remove_file(dev, &type->attrs[i]);
+ }
}
}
#ifdef CONFIG_SYSFS_DEPRECATED
-static int setup_parent(struct device *dev, struct device *parent)
+static struct kobject * get_device_parent(struct device *dev,
+ struct device *parent)
{
/* Set the parent to the class, not the parent device */
/* this keeps sysfs from having a symlink to make old udevs happy */
if (dev->class)
- dev->kobj.parent = &dev->class->subsys.kset.kobj;
+ return &dev->class->subsys.kset.kobj;
else if (parent)
- dev->kobj.parent = &parent->kobj;
+ return &parent->kobj;
- return 0;
+ return NULL;
}
#else
-static int virtual_device_parent(struct device *dev)
+static struct kobject * virtual_device_parent(struct device *dev)
{
if (!dev->class)
- return -ENODEV;
+ return ERR_PTR(-ENODEV);
if (!dev->class->virtual_dir) {
static struct kobject *virtual_dir = NULL;
dev->class->virtual_dir = kobject_add_dir(virtual_dir, dev->class->name);
}
- dev->kobj.parent = dev->class->virtual_dir;
- return 0;
+ return dev->class->virtual_dir;
}
-static int setup_parent(struct device *dev, struct device *parent)
+static struct kobject * get_device_parent(struct device *dev,
+ struct device *parent)
{
- int error;
-
/* if this is a class device, and has no parent, create one */
if ((dev->class) && (parent == NULL)) {
- error = virtual_device_parent(dev);
- if (error)
- return error;
+ return virtual_device_parent(dev);
} else if (parent)
- dev->kobj.parent = &parent->kobj;
+ return &parent->kobj;
+ return NULL;
+}
+#endif
+static int setup_parent(struct device *dev, struct device *parent)
+{
+ struct kobject *kobj;
+ kobj = get_device_parent(dev, parent);
+ if (IS_ERR(kobj))
+ return PTR_ERR(kobj);
+ if (kobj)
+ dev->kobj.parent = kobj;
return 0;
}
-#endif
/**
* device_add - add device to device hierarchy.
&dev->kobj, dev->bus_id);
#ifdef CONFIG_SYSFS_DEPRECATED
if (parent) {
- sysfs_create_link(&dev->kobj, &dev->parent->kobj, "device");
- class_name = make_class_name(dev->class->name, &dev->kobj);
- sysfs_create_link(&dev->parent->kobj, &dev->kobj, class_name);
+ sysfs_create_link(&dev->kobj, &dev->parent->kobj,
+ "device");
+ class_name = make_class_name(dev->class->name,
+ &dev->kobj);
+ if (class_name)
+ sysfs_create_link(&dev->parent->kobj,
+ &dev->kobj, class_name);
}
#endif
}
goto PMError;
if ((error = bus_add_device(dev)))
goto BusError;
- kobject_uevent(&dev->kobj, KOBJ_ADD);
+ if (!dev->uevent_suppress)
+ kobject_uevent(&dev->kobj, KOBJ_ADD);
if ((error = bus_attach_device(dev)))
goto AttachError;
if (parent)
if (parent) {
char *class_name = make_class_name(dev->class->name,
&dev->kobj);
- sysfs_remove_link(&dev->parent->kobj, class_name);
+ if (class_name)
+ sysfs_remove_link(&dev->parent->kobj,
+ class_name);
kfree(class_name);
sysfs_remove_link(&dev->kobj, "device");
}
class_name = make_class_name(dev->class->name, &dev->kobj);
if (!class_name) {
- error = PTR_ERR(class_name);
- class_name = NULL;
+ error = -ENOMEM;
goto out;
}
if (old_parent) {
sysfs_remove_link(&dev->kobj, "device");
sysfs_remove_link(&old_parent->kobj, class_name);
}
- error = sysfs_create_link(&dev->kobj, &new_parent->kobj, "device");
- if (error)
- goto out;
- error = sysfs_create_link(&new_parent->kobj, &dev->kobj, class_name);
- if (error)
- sysfs_remove_link(&dev->kobj, "device");
+ if (new_parent) {
+ error = sysfs_create_link(&dev->kobj, &new_parent->kobj,
+ "device");
+ if (error)
+ goto out;
+ error = sysfs_create_link(&new_parent->kobj, &dev->kobj,
+ class_name);
+ if (error)
+ sysfs_remove_link(&dev->kobj, "device");
+ }
+ else
+ error = 0;
out:
kfree(class_name);
return error;
/**
* device_move - moves a device to a new parent
* @dev: the pointer to the struct device to be moved
- * @new_parent: the new parent of the device
+ * @new_parent: the new parent of the device (can by NULL)
*/
int device_move(struct device *dev, struct device *new_parent)
{
int error;
struct device *old_parent;
+ struct kobject *new_parent_kobj;
dev = get_device(dev);
if (!dev)
return -EINVAL;
- if (!device_is_registered(dev)) {
- error = -EINVAL;
- goto out;
- }
new_parent = get_device(new_parent);
- if (!new_parent) {
- error = -EINVAL;
+ new_parent_kobj = get_device_parent (dev, new_parent);
+ if (IS_ERR(new_parent_kobj)) {
+ error = PTR_ERR(new_parent_kobj);
+ put_device(new_parent);
goto out;
}
pr_debug("DEVICE: moving '%s' to '%s'\n", dev->bus_id,
- new_parent->bus_id);
- error = kobject_move(&dev->kobj, &new_parent->kobj);
+ new_parent ? new_parent->bus_id : "<NULL>");
+ error = kobject_move(&dev->kobj, new_parent_kobj);
if (error) {
put_device(new_parent);
goto out;
dev->parent = new_parent;
if (old_parent)
klist_remove(&dev->knode_parent);
- klist_add_tail(&dev->knode_parent, &new_parent->klist_children);
+ if (new_parent)
+ klist_add_tail(&dev->knode_parent, &new_parent->klist_children);
if (!dev->class)
goto out_put;
error = device_move_class_links(dev, old_parent, new_parent);
/* We ignore errors on cleanup since we're hosed anyway... */
device_move_class_links(dev, new_parent, old_parent);
if (!kobject_move(&dev->kobj, &old_parent->kobj)) {
- klist_remove(&dev->knode_parent);
+ if (new_parent)
+ klist_remove(&dev->knode_parent);
if (old_parent)
klist_add_tail(&dev->knode_parent,
&old_parent->klist_children);
*/
int device_bind_driver(struct device *dev)
{
- driver_bound(dev);
- return driver_sysfs_add(dev);
+ int ret;
+
+ ret = driver_sysfs_add(dev);
+ if (!ret)
+ driver_bound(dev);
+ return ret;
}
struct stupid_thread_structure {
driver_sysfs_remove(dev);
dev->driver = NULL;
- if (ret == -ENODEV || ret == -ENXIO) {
- /* Driver matched, but didn't support device
- * or device not found.
- * Not an error; keep going.
- */
- ret = 0;
- } else {
+ if (ret != -ENODEV && ret != -ENXIO) {
/* driver matched but the probe failed */
printk(KERN_WARNING
"%s: probe of %s failed with error %d\n",
drv->name, dev->bus_id, ret);
}
+ /*
+ * Ignore errors returned by ->probe so that the next driver can try
+ * its luck.
+ */
+ ret = 0;
done:
kfree(data);
atomic_dec(&probe_count);
FW_STATUS_READY_NOHOTPLUG,
};
-static int loading_timeout = 10; /* In seconds */
+static int loading_timeout = 60; /* In seconds */
/* fw_lock could be moved to 'struct firmware_priv' but since it is just
* guarding for corner cases a global lock should be OK */
int __init platform_bus_init(void)
{
- device_register(&platform_bus);
- return bus_register(&platform_bus_type);
+ int error;
+
+ error = device_register(&platform_bus);
+ if (error)
+ return error;
+ error = bus_register(&platform_bus_type);
+ if (error)
+ device_unregister(&platform_bus);
+ return error;
}
#ifndef ARCH_HAS_DMA_GET_REQUIRED_MASK
int free;
unsigned long start;
unsigned long size;
+ struct drm_mm *mm;
void *private;
} drm_mm_node_t;
typedef struct drm_mm {
- drm_mm_node_t root_node;
+ struct list_head fl_entry;
+ struct list_head ml_entry;
} drm_mm_t;
/**
extern int drm_mem_info(char *buf, char **start, off_t offset,
int request, int *eof, void *data);
extern void *drm_realloc(void *oldpt, size_t oldsize, size_t size, int area);
-extern void *drm_ioremap(unsigned long offset, unsigned long size,
- drm_device_t * dev);
-extern void drm_ioremapfree(void *pt, unsigned long size, drm_device_t * dev);
extern DRM_AGP_MEM *drm_alloc_agp(drm_device_t * dev, int pages, u32 type);
extern int drm_free_agp(DRM_AGP_MEM * handle, int pages);
extern drm_mm_node_t *drm_mm_get_block(drm_mm_node_t * parent,
unsigned long size,
unsigned alignment);
-extern void drm_mm_put_block(drm_mm_t *mm, drm_mm_node_t *cur);
+void drm_mm_put_block(drm_mm_node_t * cur);
extern drm_mm_node_t *drm_mm_search_free(const drm_mm_t *mm, unsigned long size,
unsigned alignment, int best_match);
extern int drm_mm_init(drm_mm_t *mm, unsigned long start, unsigned long size);
extern void drm_mm_takedown(drm_mm_t *mm);
+extern int drm_mm_clean(drm_mm_t *mm);
+extern unsigned long drm_mm_tail_space(drm_mm_t *mm);
+extern int drm_mm_remove_space_from_tail(drm_mm_t *mm, unsigned long size);
+extern int drm_mm_add_space_to_tail(drm_mm_t *mm, unsigned long size);
-/* Inline replacements for DRM_IOREMAP macros */
-static __inline__ void drm_core_ioremap(struct drm_map *map,
- struct drm_device *dev)
-{
- map->handle = drm_ioremap(map->offset, map->size, dev);
-}
-
-#if 0
-static __inline__ void drm_core_ioremap_nocache(struct drm_map *map,
- struct drm_device *dev)
-{
- map->handle = drm_ioremap_nocache(map->offset, map->size, dev);
-}
-#endif /* 0 */
-
-static __inline__ void drm_core_ioremapfree(struct drm_map *map,
- struct drm_device *dev)
-{
- if (map->handle && map->size)
- drm_ioremapfree(map->handle, map->size, dev);
-}
+extern void drm_core_ioremap(struct drm_map *map, struct drm_device *dev);
+extern void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev);
static __inline__ struct drm_map *drm_core_findmap(struct drm_device *dev,
unsigned int token)
if (!use_hashed_handle) {
int ret;
- hash->key = user_token;
+ hash->key = user_token >> PAGE_SHIFT;
ret = drm_ht_insert_item(&dev->map_hash, hash);
if (ret != -EINVAL)
return ret;
}
return drm_ht_just_insert_please(&dev->map_hash, hash,
user_token, 32 - PAGE_SHIFT - 3,
- PAGE_SHIFT, DRM_MAP_HASH_OFFSET);
+ 0, DRM_MAP_HASH_OFFSET >> PAGE_SHIFT);
}
/**
}
}
if (map->type == _DRM_REGISTERS)
- map->handle = drm_ioremap(map->offset, map->size, dev);
+ map->handle = ioremap(map->offset, map->size);
break;
case _DRM_SHM:
- map->handle = vmalloc_32(map->size);
+ map->handle = vmalloc_user(map->size);
DRM_DEBUG("%lu %d %p\n",
map->size, drm_order(map->size), map->handle);
if (!map->handle) {
list = drm_alloc(sizeof(*list), DRM_MEM_MAPS);
if (!list) {
if (map->type == _DRM_REGISTERS)
- drm_ioremapfree(map->handle, map->size, dev);
+ iounmap(map->handle);
drm_free(map, sizeof(*map), DRM_MEM_MAPS);
return -EINVAL;
}
ret = drm_map_handle(dev, &list->hash, user_token, 0);
if (ret) {
if (map->type == _DRM_REGISTERS)
- drm_ioremapfree(map->handle, map->size, dev);
+ iounmap(map->handle);
drm_free(map, sizeof(*map), DRM_MEM_MAPS);
drm_free(list, sizeof(*list), DRM_MEM_MAPS);
mutex_unlock(&dev->struct_mutex);
return ret;
}
- list->user_token = list->hash.key;
+ list->user_token = list->hash.key << PAGE_SHIFT;
mutex_unlock(&dev->struct_mutex);
*maplist = list;
if (r_list->map == map) {
list_del(list);
- drm_ht_remove_key(&dev->map_hash, r_list->user_token);
+ drm_ht_remove_key(&dev->map_hash,
+ r_list->user_token >> PAGE_SHIFT);
drm_free(list, sizeof(*list), DRM_MEM_MAPS);
break;
}
switch (map->type) {
case _DRM_REGISTERS:
- drm_ioremapfree(map->handle, map->size, dev);
+ iounmap(map->handle);
/* FALLTHROUGH */
case _DRM_FRAME_BUFFER:
if (drm_core_has_MTRR(dev) && map->mtrr >= 0) {
}
#if __OS_HAS_AGP
-/*
- * Find the drm_map that covers the range [offset, offset+size).
- */
-static drm_map_t *drm_lookup_map(unsigned long offset,
- unsigned long size, drm_device_t * dev)
-{
- struct list_head *list;
- drm_map_list_t *r_list;
- drm_map_t *map;
-
- list_for_each(list, &dev->maplist->head) {
- r_list = (drm_map_list_t *) list;
- map = r_list->map;
- if (!map)
- continue;
- if (map->offset <= offset
- && (offset + size) <= (map->offset + map->size))
- return map;
- }
- return NULL;
-}
-
static void *agp_remap(unsigned long offset, unsigned long size,
drm_device_t * dev)
{
}
#else /* __OS_HAS_AGP */
-
-static inline drm_map_t *drm_lookup_map(unsigned long offset,
- unsigned long size, drm_device_t * dev)
-{
- return NULL;
-}
-
static inline void *agp_remap(unsigned long offset, unsigned long size,
drm_device_t * dev)
{
#endif /* agp */
-void *drm_ioremap(unsigned long offset, unsigned long size,
- drm_device_t * dev)
-{
- if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
- drm_map_t *map = drm_lookup_map(offset, size, dev);
-
- if (map && map->type == _DRM_AGP)
- return agp_remap(offset, size, dev);
- }
- return ioremap(offset, size);
-}
-EXPORT_SYMBOL(drm_ioremap);
+#endif /* debug_memory */
-#if 0
-void *drm_ioremap_nocache(unsigned long offset,
- unsigned long size, drm_device_t * dev)
+void drm_core_ioremap(struct drm_map *map, struct drm_device *dev)
{
- if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture) {
- drm_map_t *map = drm_lookup_map(offset, size, dev);
-
- if (map && map->type == _DRM_AGP)
- return agp_remap(offset, size, dev);
- }
- return ioremap_nocache(offset, size);
+ if (drm_core_has_AGP(dev) &&
+ dev->agp && dev->agp->cant_use_aperture && map->type == _DRM_AGP)
+ map->handle = agp_remap(map->offset, map->size, dev);
+ else
+ map->handle = ioremap(map->offset, map->size);
}
-#endif /* 0 */
+EXPORT_SYMBOL(drm_core_ioremap);
-void drm_ioremapfree(void *pt, unsigned long size,
- drm_device_t * dev)
+void drm_core_ioremapfree(struct drm_map *map, struct drm_device *dev)
{
- /*
- * This is a bit ugly. It would be much cleaner if the DRM API would use separate
- * routines for handling mappings in the AGP space. Hopefully this can be done in
- * a future revision of the interface...
- */
- if (drm_core_has_AGP(dev) && dev->agp && dev->agp->cant_use_aperture
- && ((unsigned long)pt >= VMALLOC_START
- && (unsigned long)pt < VMALLOC_END)) {
- unsigned long offset;
- drm_map_t *map;
-
- offset = drm_follow_page(pt) | ((unsigned long)pt & ~PAGE_MASK);
- map = drm_lookup_map(offset, size, dev);
- if (map && map->type == _DRM_AGP) {
- vunmap(pt);
- return;
- }
- }
-
- iounmap(pt);
+ if (!map->handle || !map->size)
+ return;
+
+ if (drm_core_has_AGP(dev) &&
+ dev->agp && dev->agp->cant_use_aperture && map->type == _DRM_AGP)
+ vunmap(map->handle);
+ else
+ iounmap(map->handle);
}
-EXPORT_SYMBOL(drm_ioremapfree);
+EXPORT_SYMBOL(drm_core_ioremapfree);
-#endif /* debug_memory */
# endif
#endif
-static inline unsigned long drm_follow_page(void *vaddr)
-{
- pgd_t *pgd = pgd_offset_k((unsigned long)vaddr);
- pud_t *pud = pud_offset(pgd, (unsigned long)vaddr);
- pmd_t *pmd = pmd_offset(pud, (unsigned long)vaddr);
- pte_t *ptep = pte_offset_kernel(pmd, (unsigned long)vaddr);
- return pte_pfn(*ptep) << PAGE_SHIFT;
-}
-
#else /* __OS_HAS_AGP */
-static inline unsigned long drm_follow_page(void *vaddr)
-{
- return 0;
-}
-
#endif
-
-void *drm_ioremap(unsigned long offset, unsigned long size,
- drm_device_t * dev);
-
-void drm_ioremapfree(void *pt, unsigned long size,
- drm_device_t * dev);
}
}
-void *drm_ioremap (unsigned long offset, unsigned long size,
- drm_device_t * dev) {
- void *pt;
-
- if (!size) {
- DRM_MEM_ERROR(DRM_MEM_MAPPINGS,
- "Mapping 0 bytes at 0x%08lx\n", offset);
- return NULL;
- }
-
- if (!(pt = drm_ioremap(offset, size, dev))) {
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[DRM_MEM_MAPPINGS].fail_count;
- spin_unlock(&drm_mem_lock);
- return NULL;
- }
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[DRM_MEM_MAPPINGS].succeed_count;
- drm_mem_stats[DRM_MEM_MAPPINGS].bytes_allocated += size;
- spin_unlock(&drm_mem_lock);
- return pt;
-}
-
-#if 0
-void *drm_ioremap_nocache (unsigned long offset, unsigned long size,
- drm_device_t * dev) {
- void *pt;
-
- if (!size) {
- DRM_MEM_ERROR(DRM_MEM_MAPPINGS,
- "Mapping 0 bytes at 0x%08lx\n", offset);
- return NULL;
- }
-
- if (!(pt = drm_ioremap_nocache(offset, size, dev))) {
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[DRM_MEM_MAPPINGS].fail_count;
- spin_unlock(&drm_mem_lock);
- return NULL;
- }
- spin_lock(&drm_mem_lock);
- ++drm_mem_stats[DRM_MEM_MAPPINGS].succeed_count;
- drm_mem_stats[DRM_MEM_MAPPINGS].bytes_allocated += size;
- spin_unlock(&drm_mem_lock);
- return pt;
-}
-#endif /* 0 */
-
-void drm_ioremapfree (void *pt, unsigned long size, drm_device_t * dev) {
- int alloc_count;
- int free_count;
-
- if (!pt)
- DRM_MEM_ERROR(DRM_MEM_MAPPINGS,
- "Attempt to free NULL pointer\n");
- else
- drm_ioremapfree(pt, size, dev);
-
- spin_lock(&drm_mem_lock);
- drm_mem_stats[DRM_MEM_MAPPINGS].bytes_freed += size;
- free_count = ++drm_mem_stats[DRM_MEM_MAPPINGS].free_count;
- alloc_count = drm_mem_stats[DRM_MEM_MAPPINGS].succeed_count;
- spin_unlock(&drm_mem_lock);
- if (free_count > alloc_count) {
- DRM_MEM_ERROR(DRM_MEM_MAPPINGS,
- "Excess frees: %d frees, %d allocs\n",
- free_count, alloc_count);
- }
-}
-
#if __OS_HAS_AGP
DRM_AGP_MEM *drm_alloc_agp (drm_device_t *dev, int pages, u32 type) {
*/
#include "drmP.h"
+#include <linux/slab.h>
+
+unsigned long drm_mm_tail_space(drm_mm_t *mm)
+{
+ struct list_head *tail_node;
+ drm_mm_node_t *entry;
+
+ tail_node = mm->ml_entry.prev;
+ entry = list_entry(tail_node, drm_mm_node_t, ml_entry);
+ if (!entry->free)
+ return 0;
+
+ return entry->size;
+}
+
+int drm_mm_remove_space_from_tail(drm_mm_t *mm, unsigned long size)
+{
+ struct list_head *tail_node;
+ drm_mm_node_t *entry;
+
+ tail_node = mm->ml_entry.prev;
+ entry = list_entry(tail_node, drm_mm_node_t, ml_entry);
+ if (!entry->free)
+ return -ENOMEM;
+
+ if (entry->size <= size)
+ return -ENOMEM;
+
+ entry->size -= size;
+ return 0;
+}
+
+
+static int drm_mm_create_tail_node(drm_mm_t *mm,
+ unsigned long start,
+ unsigned long size)
+{
+ drm_mm_node_t *child;
+
+ child = (drm_mm_node_t *)
+ drm_alloc(sizeof(*child), DRM_MEM_MM);
+ if (!child)
+ return -ENOMEM;
+
+ child->free = 1;
+ child->size = size;
+ child->start = start;
+ child->mm = mm;
+
+ list_add_tail(&child->ml_entry, &mm->ml_entry);
+ list_add_tail(&child->fl_entry, &mm->fl_entry);
+
+ return 0;
+}
+
+
+int drm_mm_add_space_to_tail(drm_mm_t *mm, unsigned long size)
+{
+ struct list_head *tail_node;
+ drm_mm_node_t *entry;
+
+ tail_node = mm->ml_entry.prev;
+ entry = list_entry(tail_node, drm_mm_node_t, ml_entry);
+ if (!entry->free) {
+ return drm_mm_create_tail_node(mm, entry->start + entry->size, size);
+ }
+ entry->size += size;
+ return 0;
+}
+
+static drm_mm_node_t *drm_mm_split_at_start(drm_mm_node_t *parent,
+ unsigned long size)
+{
+ drm_mm_node_t *child;
+
+ child = (drm_mm_node_t *)
+ drm_alloc(sizeof(*child), DRM_MEM_MM);
+ if (!child)
+ return NULL;
+
+ INIT_LIST_HEAD(&child->fl_entry);
+
+ child->free = 0;
+ child->size = size;
+ child->start = parent->start;
+ child->mm = parent->mm;
+
+ list_add_tail(&child->ml_entry, &parent->ml_entry);
+ INIT_LIST_HEAD(&child->fl_entry);
+
+ parent->size -= size;
+ parent->start += size;
+ return child;
+}
+
+
drm_mm_node_t *drm_mm_get_block(drm_mm_node_t * parent,
unsigned long size, unsigned alignment)
{
+ drm_mm_node_t *align_splitoff = NULL;
drm_mm_node_t *child;
+ unsigned tmp = 0;
if (alignment)
- size += alignment - 1;
+ tmp = parent->start % alignment;
+
+ if (tmp) {
+ align_splitoff = drm_mm_split_at_start(parent, alignment - tmp);
+ if (!align_splitoff)
+ return NULL;
+ }
if (parent->size == size) {
list_del_init(&parent->fl_entry);
parent->free = 0;
return parent;
} else {
- child = (drm_mm_node_t *) drm_alloc(sizeof(*child), DRM_MEM_MM);
- if (!child)
- return NULL;
-
- INIT_LIST_HEAD(&child->ml_entry);
- INIT_LIST_HEAD(&child->fl_entry);
+ child = drm_mm_split_at_start(parent, size);
+ }
- child->free = 0;
- child->size = size;
- child->start = parent->start;
+ if (align_splitoff)
+ drm_mm_put_block(align_splitoff);
- list_add_tail(&child->ml_entry, &parent->ml_entry);
- parent->size -= size;
- parent->start += size;
- }
return child;
}
* Otherwise add to the free stack.
*/
-void drm_mm_put_block(drm_mm_t * mm, drm_mm_node_t * cur)
+void drm_mm_put_block(drm_mm_node_t * cur)
{
- drm_mm_node_t *list_root = &mm->root_node;
+ drm_mm_t *mm = cur->mm;
struct list_head *cur_head = &cur->ml_entry;
- struct list_head *root_head = &list_root->ml_entry;
+ struct list_head *root_head = &mm->ml_entry;
drm_mm_node_t *prev_node = NULL;
drm_mm_node_t *next_node;
}
if (!merged) {
cur->free = 1;
- list_add(&cur->fl_entry, &list_root->fl_entry);
+ list_add(&cur->fl_entry, &mm->fl_entry);
} else {
list_del(&cur->ml_entry);
drm_free(cur, sizeof(*cur), DRM_MEM_MM);
unsigned alignment, int best_match)
{
struct list_head *list;
- const struct list_head *free_stack = &mm->root_node.fl_entry;
+ const struct list_head *free_stack = &mm->fl_entry;
drm_mm_node_t *entry;
drm_mm_node_t *best;
unsigned long best_size;
+ unsigned wasted;
best = NULL;
best_size = ~0UL;
- if (alignment)
- size += alignment - 1;
-
list_for_each(list, free_stack) {
entry = list_entry(list, drm_mm_node_t, fl_entry);
- if (entry->size >= size) {
+ wasted = 0;
+
+ if (entry->size < size)
+ continue;
+
+ if (alignment) {
+ register unsigned tmp = entry->start % alignment;
+ if (tmp)
+ wasted += alignment - tmp;
+ }
+
+
+ if (entry->size >= size + wasted) {
if (!best_match)
return entry;
if (size < best_size) {
return best;
}
-int drm_mm_init(drm_mm_t * mm, unsigned long start, unsigned long size)
+int drm_mm_clean(drm_mm_t * mm)
{
- drm_mm_node_t *child;
-
- INIT_LIST_HEAD(&mm->root_node.ml_entry);
- INIT_LIST_HEAD(&mm->root_node.fl_entry);
- child = (drm_mm_node_t *) drm_alloc(sizeof(*child), DRM_MEM_MM);
- if (!child)
- return -ENOMEM;
-
- INIT_LIST_HEAD(&child->ml_entry);
- INIT_LIST_HEAD(&child->fl_entry);
+ struct list_head *head = &mm->ml_entry;
- child->start = start;
- child->size = size;
- child->free = 1;
+ return (head->next->next == head);
+}
- list_add(&child->fl_entry, &mm->root_node.fl_entry);
- list_add(&child->ml_entry, &mm->root_node.ml_entry);
+int drm_mm_init(drm_mm_t * mm, unsigned long start, unsigned long size)
+{
+ INIT_LIST_HEAD(&mm->ml_entry);
+ INIT_LIST_HEAD(&mm->fl_entry);
- return 0;
+ return drm_mm_create_tail_node(mm, start, size);
}
EXPORT_SYMBOL(drm_mm_init);
void drm_mm_takedown(drm_mm_t * mm)
{
- struct list_head *bnode = mm->root_node.fl_entry.next;
+ struct list_head *bnode = mm->fl_entry.next;
drm_mm_node_t *entry;
entry = list_entry(bnode, drm_mm_node_t, fl_entry);
- if (entry->ml_entry.next != &mm->root_node.ml_entry ||
- entry->fl_entry.next != &mm->root_node.fl_entry) {
+ if (entry->ml_entry.next != &mm->ml_entry ||
+ entry->fl_entry.next != &mm->fl_entry) {
DRM_ERROR("Memory manager not clean. Delaying takedown\n");
return;
}
{0x1106, 0x3022, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x3118, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_PRO_GROUP_A}, \
{0x1106, 0x3122, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x7205, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x3108, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x3304, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x3157, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
{0x1106, 0x3344, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
- {0x1106, 0x7204, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3343, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \
+ {0x1106, 0x3230, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VIA_DX9_0}, \
{0, 0, 0}
#define i810_PCI_IDS \
for (pt = dev->vmalist; pt; pt = pt->next) {
if (!(vma = pt->vma))
continue;
- DRM_PROC_PRINT("\n%5d 0x%08lx-0x%08lx %c%c%c%c%c%c 0x%08lx",
+ DRM_PROC_PRINT("\n%5d 0x%08lx-0x%08lx %c%c%c%c%c%c 0x%08lx000",
pt->pid,
vma->vm_start,
vma->vm_end,
vma->vm_flags & VM_MAYSHARE ? 's' : 'p',
vma->vm_flags & VM_LOCKED ? 'l' : '-',
vma->vm_flags & VM_IO ? 'i' : '-',
- vma->vm_pgoff << PAGE_SHIFT);
+ vma->vm_pgoff);
#if defined(__i386__)
pgprot = pgprot_val(vma->vm_page_prot);
static void drm_sman_mm_free(void *private, void *ref)
{
- drm_mm_t *mm = (drm_mm_t *) private;
drm_mm_node_t *node = (drm_mm_node_t *) ref;
- drm_mm_put_block(mm, node);
+ drm_mm_put_block(node);
}
static void drm_sman_mm_destroy(void *private)
if (!dev->agp || !dev->agp->cant_use_aperture)
goto vm_nopage_error;
- if (drm_ht_find_item(&dev->map_hash, vma->vm_pgoff << PAGE_SHIFT, &hash))
+ if (drm_ht_find_item(&dev->map_hash, vma->vm_pgoff, &hash))
goto vm_nopage_error;
r_list = drm_hash_entry(hash, drm_map_list_t, hash);
map->size);
DRM_DEBUG("mtrr_del = %d\n", retcode);
}
- drm_ioremapfree(map->handle, map->size, dev);
+ iounmap(map->handle);
break;
case _DRM_SHM:
vfree(map->handle);
lock_kernel();
dev = priv->head->dev;
dma = dev->dma;
- DRM_DEBUG("start = 0x%lx, end = 0x%lx, offset = 0x%lx\n",
- vma->vm_start, vma->vm_end, vma->vm_pgoff << PAGE_SHIFT);
+ DRM_DEBUG("start = 0x%lx, end = 0x%lx, page offset = 0x%lx\n",
+ vma->vm_start, vma->vm_end, vma->vm_pgoff);
/* Length must match exact page count */
if (!dma || (length >> PAGE_SHIFT) != dma->page_count) {
unsigned long offset = 0;
drm_hash_item_t *hash;
- DRM_DEBUG("start = 0x%lx, end = 0x%lx, offset = 0x%lx\n",
- vma->vm_start, vma->vm_end, vma->vm_pgoff << PAGE_SHIFT);
+ DRM_DEBUG("start = 0x%lx, end = 0x%lx, page offset = 0x%lx\n",
+ vma->vm_start, vma->vm_end, vma->vm_pgoff);
if (!priv->authenticated)
return -EACCES;
* the AGP mapped at physical address 0
* --BenH.
*/
- if (!(vma->vm_pgoff << PAGE_SHIFT)
+ if (!vma->vm_pgoff
#if __OS_HAS_AGP
&& (!dev->agp
|| dev->agp->agp_info.device->vendor != PCI_VENDOR_ID_APPLE)
)
return drm_mmap_dma(filp, vma);
- if (drm_ht_find_item(&dev->map_hash, vma->vm_pgoff << PAGE_SHIFT, &hash)) {
+ if (drm_ht_find_item(&dev->map_hash, vma->vm_pgoff, &hash)) {
DRM_ERROR("Could not find map\n");
return -EINVAL;
}
(drm_i810_private_t *) dev->dev_private;
if (dev_priv->ring.virtual_start) {
- drm_ioremapfree((void *)dev_priv->ring.virtual_start,
- dev_priv->ring.Size, dev);
+ drm_core_ioremapfree(&dev_priv->ring.map, dev);
}
if (dev_priv->hw_status_page) {
pci_free_consistent(dev->pdev, PAGE_SIZE,
for (i = 0; i < dma->buf_count; i++) {
drm_buf_t *buf = dma->buflist[i];
drm_i810_buf_priv_t *buf_priv = buf->dev_private;
+
if (buf_priv->kernel_virtual && buf->total)
- drm_ioremapfree(buf_priv->kernel_virtual,
- buf->total, dev);
+ drm_core_ioremapfree(&buf_priv->map, dev);
}
}
return 0;
*buf_priv->in_use = I810_BUF_FREE;
- buf_priv->kernel_virtual = drm_ioremap(buf->bus_address,
- buf->total, dev);
+ buf_priv->map.offset = buf->bus_address;
+ buf_priv->map.size = buf->total;
+ buf_priv->map.type = _DRM_AGP;
+ buf_priv->map.flags = 0;
+ buf_priv->map.mtrr = 0;
+
+ drm_core_ioremap(&buf_priv->map, dev);
+ buf_priv->kernel_virtual = buf_priv->map.handle;
+
}
return 0;
}
dev_priv->ring.End = init->ring_end;
dev_priv->ring.Size = init->ring_size;
- dev_priv->ring.virtual_start = drm_ioremap(dev->agp->base +
- init->ring_start,
- init->ring_size, dev);
+ dev_priv->ring.map.offset = dev->agp->base + init->ring_start;
+ dev_priv->ring.map.size = init->ring_size;
+ dev_priv->ring.map.type = _DRM_AGP;
+ dev_priv->ring.map.flags = 0;
+ dev_priv->ring.map.mtrr = 0;
- if (dev_priv->ring.virtual_start == NULL) {
+ drm_core_ioremap(&dev_priv->ring.map, dev);
+
+ if (dev_priv->ring.map.handle == NULL) {
dev->dev_private = (void *)dev_priv;
i810_dma_cleanup(dev);
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
- return -ENOMEM;
+ return DRM_ERR(ENOMEM);
}
+ dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+
dev_priv->ring.tail_mask = dev_priv->ring.Size - 1;
dev_priv->w = init->w;
int currently_mapped;
void *virtual;
void *kernel_virtual;
+ drm_local_map_t map;
} drm_i810_buf_priv_t;
typedef struct _drm_i810_ring_buffer {
int head;
int tail;
int space;
+ drm_local_map_t map;
} drm_i810_ring_buffer_t;
typedef struct drm_i810_private {
(drm_i830_private_t *) dev->dev_private;
if (dev_priv->ring.virtual_start) {
- drm_ioremapfree((void *)dev_priv->ring.virtual_start,
- dev_priv->ring.Size, dev);
+ drm_core_ioremapfree(&dev_priv->ring.map, dev);
}
if (dev_priv->hw_status_page) {
pci_free_consistent(dev->pdev, PAGE_SIZE,
drm_buf_t *buf = dma->buflist[i];
drm_i830_buf_priv_t *buf_priv = buf->dev_private;
if (buf_priv->kernel_virtual && buf->total)
- drm_ioremapfree(buf_priv->kernel_virtual,
- buf->total, dev);
+ drm_core_ioremapfree(&buf_priv->map, dev);
}
}
return 0;
*buf_priv->in_use = I830_BUF_FREE;
- buf_priv->kernel_virtual = drm_ioremap(buf->bus_address,
- buf->total, dev);
+ buf_priv->map.offset = buf->bus_address;
+ buf_priv->map.size = buf->total;
+ buf_priv->map.type = _DRM_AGP;
+ buf_priv->map.flags = 0;
+ buf_priv->map.mtrr = 0;
+
+ drm_core_ioremap(&buf_priv->map, dev);
+ buf_priv->kernel_virtual = buf_priv->map.handle;
}
return 0;
}
dev_priv->ring.End = init->ring_end;
dev_priv->ring.Size = init->ring_size;
- dev_priv->ring.virtual_start = drm_ioremap(dev->agp->base +
- init->ring_start,
- init->ring_size, dev);
+ dev_priv->ring.map.offset = dev->agp->base + init->ring_start;
+ dev_priv->ring.map.size = init->ring_size;
+ dev_priv->ring.map.type = _DRM_AGP;
+ dev_priv->ring.map.flags = 0;
+ dev_priv->ring.map.mtrr = 0;
+
+ drm_core_ioremap(&dev_priv->ring.map, dev);
- if (dev_priv->ring.virtual_start == NULL) {
+ if (dev_priv->ring.map.handle == NULL) {
dev->dev_private = (void *)dev_priv;
i830_dma_cleanup(dev);
DRM_ERROR("can not ioremap virtual address for"
" ring buffer\n");
- return -ENOMEM;
+ return DRM_ERR(ENOMEM);
}
+ dev_priv->ring.virtual_start = dev_priv->ring.map.handle;
+
dev_priv->ring.tail_mask = dev_priv->ring.Size - 1;
dev_priv->w = init->w;
int currently_mapped;
void __user *virtual;
void *kernel_virtual;
+ drm_local_map_t map;
} drm_i830_buf_priv_t;
typedef struct _drm_i830_ring_buffer {
int head;
int tail;
int space;
+ drm_local_map_t map;
} drm_i830_ring_buffer_t;
typedef struct drm_i830_private {
return DRM_ERR(EFAULT);
}
+ if (dev_priv->chipset == VIA_DX9_0) {
+ DRM_ERROR("AGP DMA is not supported on this chip\n");
+ return DRM_ERR(EINVAL);
+ }
+
dev_priv->ring.map.offset = dev->agp->base + init->offset;
dev_priv->ring.map.size = init->size;
dev_priv->ring.map.type = 0;
VIA_WRITE(VIA_REG_TRANSET, (HC_ParaType_PreCR << 16));
VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi);
VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo);
+ VIA_READ(VIA_REG_TRANSPACE);
}
}
return paused;
VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_hi);
VIA_WRITE(VIA_REG_TRANSPACE, pause_addr_lo);
-
+ DRM_WRITEMEMORYBARRIER();
VIA_WRITE(VIA_REG_TRANSPACE, command | HC_HAGPCMNT_MASK);
+ VIA_READ(VIA_REG_TRANSPACE);
}
static void via_pad_cache(drm_via_private_t * dev_priv, int qwords)
VIA_WRITE(VIA_PCI_DMA_MR0 + engine*0x04, VIA_DMA_MR_CM | VIA_DMA_MR_TDIE);
VIA_WRITE(VIA_PCI_DMA_BCR0 + engine*0x10, 0);
VIA_WRITE(VIA_PCI_DMA_DPR0 + engine*0x10, vsg->chain_start);
+ DRM_WRITEMEMORYBARRIER();
VIA_WRITE(VIA_PCI_DMA_CSR0 + engine*0x04, VIA_DMA_CSR_DE | VIA_DMA_CSR_TS);
+ VIA_READ(VIA_PCI_DMA_CSR0 + engine*0x04);
}
/*
#define DRIVER_NAME "via"
#define DRIVER_DESC "VIA Unichrome / Pro"
-#define DRIVER_DATE "20060529"
+#define DRIVER_DATE "20061227"
#define DRIVER_MAJOR 2
-#define DRIVER_MINOR 10
+#define DRIVER_MINOR 11
#define DRIVER_PATCHLEVEL 0
#include "via_verifier.h"
char pci_buf[VIA_PCI_BUF_SIZE];
const uint32_t *fire_offsets[VIA_FIRE_BUF_SIZE];
uint32_t num_fire_offsets;
- int pro_group_a;
+ int chipset;
drm_via_irq_t via_irqs[VIA_NUM_IRQS];
unsigned num_irqs;
maskarray_t *irq_masks;
} drm_via_private_t;
enum via_family {
- VIA_OTHER = 0,
- VIA_PRO_GROUP_A,
+ VIA_OTHER = 0, /* Baseline */
+ VIA_PRO_GROUP_A, /* Another video engine and DMA commands */
+ VIA_DX9_0 /* Same video as pro_group_a, but 3D is unsupported */
};
/* VIA MMIO register access */
dev_priv->irq_enable_mask = VIA_IRQ_VBLANK_ENABLE;
dev_priv->irq_pending_mask = VIA_IRQ_VBLANK_PENDING;
- dev_priv->irq_masks = (dev_priv->pro_group_a) ?
- via_pro_group_a_irqs : via_unichrome_irqs;
- dev_priv->num_irqs = (dev_priv->pro_group_a) ?
- via_num_pro_group_a : via_num_unichrome;
- dev_priv->irq_map = (dev_priv->pro_group_a) ?
- via_irqmap_pro_group_a : via_irqmap_unichrome;
+ if (dev_priv->chipset == VIA_PRO_GROUP_A ||
+ dev_priv->chipset == VIA_DX9_0) {
+ dev_priv->irq_masks = via_pro_group_a_irqs;
+ dev_priv->num_irqs = via_num_pro_group_a;
+ dev_priv->irq_map = via_irqmap_pro_group_a;
+ } else {
+ dev_priv->irq_masks = via_unichrome_irqs;
+ dev_priv->num_irqs = via_num_unichrome;
+ dev_priv->irq_map = via_irqmap_unichrome;
+ }
for (i = 0; i < dev_priv->num_irqs; ++i) {
atomic_set(&cur_irq->irq_received, 0);
dev->dev_private = (void *)dev_priv;
- if (chipset == VIA_PRO_GROUP_A)
- dev_priv->pro_group_a = 1;
+ dev_priv->chipset = chipset;
ret = drm_sman_init(&dev_priv->sman, 2, 12, 8);
if (ret) {
unsigned long lo = ~0, hi = 0, tmp;
uint32_t *addr, *pitch, *height, tex;
unsigned i;
+ int npot;
if (end > 9)
end = 9;
&(cur_seq->t_addr[tex = cur_seq->texture][start]);
pitch = &(cur_seq->pitch[tex][start]);
height = &(cur_seq->height[tex][start]);
-
+ npot = cur_seq->tex_npot[tex];
for (i = start; i <= end; ++i) {
tmp = *addr++;
if (tmp < lo)
lo = tmp;
- tmp += (*height++ << *pitch++);
+ if (i == 0 && npot)
+ tmp += (*height++ * *pitch++);
+ else
+ tmp += (*height++ << *pitch++);
if (tmp > hi)
hi = tmp;
}
return 0;
case check_texture_addr3:
cur_seq->unfinished = tex_address;
- tmp = ((cmd >> 24) - 0x2B);
- cur_seq->pitch[cur_seq->texture][tmp] =
- (cmd & 0x00F00000) >> 20;
- if (!tmp && (cmd & 0x000FFFFF)) {
- DRM_ERROR
- ("Unimplemented texture level 0 pitch mode.\n");
- return 2;
+ tmp = ((cmd >> 24) - HC_SubA_HTXnL0Pit);
+ if (tmp == 0 &&
+ (cmd & HC_HTXnEnPit_MASK)) {
+ cur_seq->pitch[cur_seq->texture][tmp] =
+ (cmd & HC_HTXnLnPit_MASK);
+ cur_seq->tex_npot[cur_seq->texture] = 1;
+ } else {
+ cur_seq->pitch[cur_seq->texture][tmp] =
+ (cmd & HC_HTXnLnPitE_MASK) >> HC_HTXnLnPitE_SHIFT;
+ cur_seq->tex_npot[cur_seq->texture] = 0;
+ if (cmd & 0x000FFFFF) {
+ DRM_ERROR
+ ("Unimplemented texture level 0 pitch mode.\n");
+ return 2;
+ }
}
return 0;
case check_texture_addr4:
uint32_t cmd;
const uint32_t *buf_end = buf + (size >> 2);
verifier_state_t state = state_command;
- int pro_group_a = dev_priv->pro_group_a;
+ int cme_video;
+ int supported_3d;
+
+ cme_video = (dev_priv->chipset == VIA_PRO_GROUP_A ||
+ dev_priv->chipset == VIA_DX9_0);
+
+ supported_3d = dev_priv->chipset != VIA_DX9_0;
hc_state->dev = dev;
hc_state->unfinished = no_sequence;
state = via_check_vheader6(&buf, buf_end);
break;
case state_command:
- if (HALCYON_HEADER2 == (cmd = *buf))
+ if ((HALCYON_HEADER2 == (cmd = *buf)) &&
+ supported_3d)
state = state_header2;
else if ((cmd & HALCYON_HEADER1MASK) == HALCYON_HEADER1)
state = state_header1;
- else if (pro_group_a
+ else if (cme_video
&& (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER5)
state = state_vheader5;
- else if (pro_group_a
+ else if (cme_video
&& (cmd & VIA_VIDEOMASK) == VIA_VIDEO_HEADER6)
state = state_vheader6;
- else {
+ else if ((cmd == HALCYON_HEADER2) && !supported_3d) {
+ DRM_ERROR("Accelerated 3D is not supported on this chipset yet.\n");
+ state = state_error;
+ } else {
DRM_ERROR
("Invalid / Unimplemented DMA HEADER command. 0x%x\n",
cmd);
uint32_t tex_level_lo[2];
uint32_t tex_level_hi[2];
uint32_t tex_palette_size[2];
+ uint32_t tex_npot[2];
drm_via_sequence_t unfinished;
int agp_texture;
int multitex;
return -ENODEV;
}
- if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
+ if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY)
addr_space = IPMI_MEM_ADDR_SPACE;
else
addr_space = IPMI_IO_ADDR_SPACE;
info->irq_setup = NULL;
}
- if (spmi->addr.register_bit_width) {
+ if (spmi->addr.bit_width) {
/* A (hopefully) properly formed register bit width. */
- info->io.regspacing = spmi->addr.register_bit_width / 8;
+ info->io.regspacing = spmi->addr.bit_width / 8;
} else {
info->io.regspacing = DEFAULT_REGSPACING;
}
info->io.regsize = info->io.regspacing;
- info->io.regshift = spmi->addr.register_bit_offset;
+ info->io.regshift = spmi->addr.bit_offset;
- if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
+ if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) {
info->io_setup = mem_setup;
info->io.addr_type = IPMI_IO_ADDR_SPACE;
- } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
+ } else if (spmi->addr.space_id == ACPI_ADR_SPACE_SYSTEM_IO) {
info->io_setup = port_setup;
info->io.addr_type = IPMI_MEM_ADDR_SPACE;
} else {
return;
for (i = 0; ; i++) {
- status = acpi_get_firmware_table("SPMI", i+1,
- ACPI_LOGICAL_ADDRESSING,
- (struct acpi_table_header **)
- &spmi);
+ status = acpi_get_table(ACPI_SIG_SPMI, i+1,
+ (struct acpi_table_header **)&spmi);
if (status != AE_OK)
return;
}
/* Find TCPA entry in RSDT (ACPI_LOGICAL_ADDRESSING) */
- status = acpi_get_firmware_table(ACPI_TCPA_SIG, 1,
- ACPI_LOGICAL_ADDRESSING,
- (struct acpi_table_header **)
- &buff);
+ status = acpi_get_table(ACPI_SIG_TCPA, 1,
+ (struct acpi_table_header **)&buff);
if (ACPI_FAILURE(status)) {
printk(KERN_ERR "%s: ERROR - Could not get TCPA table\n",
log->bios_event_log_end = log->bios_event_log + len;
- acpi_os_map_memory(start, len, (void *) &virt);
+ virt = acpi_os_map_memory(start, len);
memcpy(log->bios_event_log, virt, len);
If unsure say M. The compiled module will be
called padlock-sha.ko
+source "arch/s390/crypto/Kconfig"
+
config CRYPTO_DEV_GEODE
tristate "Support for the Geode LX AES engine"
depends on CRYPTO && X86_32 && PCI
static char options[64], *p = options;
char parity;
- mmio = (uart->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
+ mmio = (uart->addr.space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY);
p += sprintf(p, "console=uart,%s,0x%lx",
mmio ? "mmio" : "io", uart->addr.address);
if (uart->baud) {
If unsure, say Y
+config HID_DEBUG
+ bool "HID debugging support"
+ depends on HID
+ ---help---
+ This option lets the HID layer output diagnostics about its internal
+ state, resolve HID usages, dump HID fields, etc. Individual HID drivers
+ use this debugging facility to output information about individual HID
+ devices, etc.
+
+ This feature is useful for those who are either debugging the HID parser
+ or any HID hardware device.
+
+ If unsure, say N
+
endmenu
#
# Makefile for the HID driver
#
-
-# Multipart objects.
-hid-objs := hid-core.o hid-input.o
-
-# Optional parts of multipart objects.
+hid-objs := hid-core.o hid-input.o
obj-$(CONFIG_HID) += hid.o
-
-ifeq ($(CONFIG_INPUT_DEBUG),y)
-EXTRA_CFLAGS += -DDEBUG
-endif
+hid-$(CONFIG_HID_DEBUG) += hid-debug.o
#include <linux/input.h>
#include <linux/wait.h>
-#undef DEBUG
-#undef DEBUG_DATA
-
#include <linux/hid.h>
#include <linux/hiddev.h>
+#include <linux/hid-debug.h>
/*
* Version Information
return -1;
}
-#ifdef DEBUG_DATA
+#ifdef CONFIG_HID_DEBUG
printk(KERN_DEBUG __FILE__ ": report (size %u) (%snumbered)\n", size, report_enum->numbered ? "" : "un");
#endif
size--;
}
-#ifdef DEBUG_DATA
+#ifdef CONFIG_HID_DEBUG
{
int i;
printk(KERN_DEBUG __FILE__ ": report %d (size %u) = ", n, size);
--- /dev/null
+/*
+ * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $
+ *
+ * (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
+ * (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
+ * (c) 2007 Jiri Kosina
+ *
+ * Some debug stuff for the HID parser.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Should you need to contact me, the author, you can do so either by
+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
+ */
+
+#include <linux/hid.h>
+
+struct hid_usage_entry {
+ unsigned page;
+ unsigned usage;
+ char *description;
+};
+
+static const struct hid_usage_entry hid_usage_table[] = {
+ { 0, 0, "Undefined" },
+ { 1, 0, "GenericDesktop" },
+ {0, 0x01, "Pointer"},
+ {0, 0x02, "Mouse"},
+ {0, 0x04, "Joystick"},
+ {0, 0x05, "GamePad"},
+ {0, 0x06, "Keyboard"},
+ {0, 0x07, "Keypad"},
+ {0, 0x08, "MultiAxis"},
+ {0, 0x30, "X"},
+ {0, 0x31, "Y"},
+ {0, 0x32, "Z"},
+ {0, 0x33, "Rx"},
+ {0, 0x34, "Ry"},
+ {0, 0x35, "Rz"},
+ {0, 0x36, "Slider"},
+ {0, 0x37, "Dial"},
+ {0, 0x38, "Wheel"},
+ {0, 0x39, "HatSwitch"},
+ {0, 0x3a, "CountedBuffer"},
+ {0, 0x3b, "ByteCount"},
+ {0, 0x3c, "MotionWakeup"},
+ {0, 0x3d, "Start"},
+ {0, 0x3e, "Select"},
+ {0, 0x40, "Vx"},
+ {0, 0x41, "Vy"},
+ {0, 0x42, "Vz"},
+ {0, 0x43, "Vbrx"},
+ {0, 0x44, "Vbry"},
+ {0, 0x45, "Vbrz"},
+ {0, 0x46, "Vno"},
+ {0, 0x80, "SystemControl"},
+ {0, 0x81, "SystemPowerDown"},
+ {0, 0x82, "SystemSleep"},
+ {0, 0x83, "SystemWakeUp"},
+ {0, 0x84, "SystemContextMenu"},
+ {0, 0x85, "SystemMainMenu"},
+ {0, 0x86, "SystemAppMenu"},
+ {0, 0x87, "SystemMenuHelp"},
+ {0, 0x88, "SystemMenuExit"},
+ {0, 0x89, "SystemMenuSelect"},
+ {0, 0x8a, "SystemMenuRight"},
+ {0, 0x8b, "SystemMenuLeft"},
+ {0, 0x8c, "SystemMenuUp"},
+ {0, 0x8d, "SystemMenuDown"},
+ {0, 0x90, "D-PadUp"},
+ {0, 0x91, "D-PadDown"},
+ {0, 0x92, "D-PadRight"},
+ {0, 0x93, "D-PadLeft"},
+ { 2, 0, "Simulation" },
+ {0, 0xb0, "Aileron"},
+ {0, 0xb1, "AileronTrim"},
+ {0, 0xb2, "Anti-Torque"},
+ {0, 0xb3, "Autopilot"},
+ {0, 0xb4, "Chaff"},
+ {0, 0xb5, "Collective"},
+ {0, 0xb6, "DiveBrake"},
+ {0, 0xb7, "ElectronicCountermeasures"},
+ {0, 0xb8, "Elevator"},
+ {0, 0xb9, "ElevatorTrim"},
+ {0, 0xba, "Rudder"},
+ {0, 0xbb, "Throttle"},
+ {0, 0xbc, "FlightCommunications"},
+ {0, 0xbd, "FlareRelease"},
+ {0, 0xbe, "LandingGear"},
+ {0, 0xbf, "ToeBrake"},
+ { 7, 0, "Keyboard" },
+ { 8, 0, "LED" },
+ {0, 0x01, "NumLock"},
+ {0, 0x02, "CapsLock"},
+ {0, 0x03, "ScrollLock"},
+ {0, 0x04, "Compose"},
+ {0, 0x05, "Kana"},
+ {0, 0x4b, "GenericIndicator"},
+ { 9, 0, "Button" },
+ { 10, 0, "Ordinal" },
+ { 12, 0, "Consumer" },
+ {0, 0x238, "HorizontalWheel"},
+ { 13, 0, "Digitizers" },
+ {0, 0x01, "Digitizer"},
+ {0, 0x02, "Pen"},
+ {0, 0x03, "LightPen"},
+ {0, 0x04, "TouchScreen"},
+ {0, 0x05, "TouchPad"},
+ {0, 0x20, "Stylus"},
+ {0, 0x21, "Puck"},
+ {0, 0x22, "Finger"},
+ {0, 0x30, "TipPressure"},
+ {0, 0x31, "BarrelPressure"},
+ {0, 0x32, "InRange"},
+ {0, 0x33, "Touch"},
+ {0, 0x34, "UnTouch"},
+ {0, 0x35, "Tap"},
+ {0, 0x39, "TabletFunctionKey"},
+ {0, 0x3a, "ProgramChangeKey"},
+ {0, 0x3c, "Invert"},
+ {0, 0x42, "TipSwitch"},
+ {0, 0x43, "SecondaryTipSwitch"},
+ {0, 0x44, "BarrelSwitch"},
+ {0, 0x45, "Eraser"},
+ {0, 0x46, "TabletPick"},
+ { 15, 0, "PhysicalInterfaceDevice" },
+ {0, 0x00, "Undefined"},
+ {0, 0x01, "Physical_Interface_Device"},
+ {0, 0x20, "Normal"},
+ {0, 0x21, "Set_Effect_Report"},
+ {0, 0x22, "Effect_Block_Index"},
+ {0, 0x23, "Parameter_Block_Offset"},
+ {0, 0x24, "ROM_Flag"},
+ {0, 0x25, "Effect_Type"},
+ {0, 0x26, "ET_Constant_Force"},
+ {0, 0x27, "ET_Ramp"},
+ {0, 0x28, "ET_Custom_Force_Data"},
+ {0, 0x30, "ET_Square"},
+ {0, 0x31, "ET_Sine"},
+ {0, 0x32, "ET_Triangle"},
+ {0, 0x33, "ET_Sawtooth_Up"},
+ {0, 0x34, "ET_Sawtooth_Down"},
+ {0, 0x40, "ET_Spring"},
+ {0, 0x41, "ET_Damper"},
+ {0, 0x42, "ET_Inertia"},
+ {0, 0x43, "ET_Friction"},
+ {0, 0x50, "Duration"},
+ {0, 0x51, "Sample_Period"},
+ {0, 0x52, "Gain"},
+ {0, 0x53, "Trigger_Button"},
+ {0, 0x54, "Trigger_Repeat_Interval"},
+ {0, 0x55, "Axes_Enable"},
+ {0, 0x56, "Direction_Enable"},
+ {0, 0x57, "Direction"},
+ {0, 0x58, "Type_Specific_Block_Offset"},
+ {0, 0x59, "Block_Type"},
+ {0, 0x5A, "Set_Envelope_Report"},
+ {0, 0x5B, "Attack_Level"},
+ {0, 0x5C, "Attack_Time"},
+ {0, 0x5D, "Fade_Level"},
+ {0, 0x5E, "Fade_Time"},
+ {0, 0x5F, "Set_Condition_Report"},
+ {0, 0x60, "CP_Offset"},
+ {0, 0x61, "Positive_Coefficient"},
+ {0, 0x62, "Negative_Coefficient"},
+ {0, 0x63, "Positive_Saturation"},
+ {0, 0x64, "Negative_Saturation"},
+ {0, 0x65, "Dead_Band"},
+ {0, 0x66, "Download_Force_Sample"},
+ {0, 0x67, "Isoch_Custom_Force_Enable"},
+ {0, 0x68, "Custom_Force_Data_Report"},
+ {0, 0x69, "Custom_Force_Data"},
+ {0, 0x6A, "Custom_Force_Vendor_Defined_Data"},
+ {0, 0x6B, "Set_Custom_Force_Report"},
+ {0, 0x6C, "Custom_Force_Data_Offset"},
+ {0, 0x6D, "Sample_Count"},
+ {0, 0x6E, "Set_Periodic_Report"},
+ {0, 0x6F, "Offset"},
+ {0, 0x70, "Magnitude"},
+ {0, 0x71, "Phase"},
+ {0, 0x72, "Period"},
+ {0, 0x73, "Set_Constant_Force_Report"},
+ {0, 0x74, "Set_Ramp_Force_Report"},
+ {0, 0x75, "Ramp_Start"},
+ {0, 0x76, "Ramp_End"},
+ {0, 0x77, "Effect_Operation_Report"},
+ {0, 0x78, "Effect_Operation"},
+ {0, 0x79, "Op_Effect_Start"},
+ {0, 0x7A, "Op_Effect_Start_Solo"},
+ {0, 0x7B, "Op_Effect_Stop"},
+ {0, 0x7C, "Loop_Count"},
+ {0, 0x7D, "Device_Gain_Report"},
+ {0, 0x7E, "Device_Gain"},
+ {0, 0x7F, "PID_Pool_Report"},
+ {0, 0x80, "RAM_Pool_Size"},
+ {0, 0x81, "ROM_Pool_Size"},
+ {0, 0x82, "ROM_Effect_Block_Count"},
+ {0, 0x83, "Simultaneous_Effects_Max"},
+ {0, 0x84, "Pool_Alignment"},
+ {0, 0x85, "PID_Pool_Move_Report"},
+ {0, 0x86, "Move_Source"},
+ {0, 0x87, "Move_Destination"},
+ {0, 0x88, "Move_Length"},
+ {0, 0x89, "PID_Block_Load_Report"},
+ {0, 0x8B, "Block_Load_Status"},
+ {0, 0x8C, "Block_Load_Success"},
+ {0, 0x8D, "Block_Load_Full"},
+ {0, 0x8E, "Block_Load_Error"},
+ {0, 0x8F, "Block_Handle"},
+ {0, 0x90, "PID_Block_Free_Report"},
+ {0, 0x91, "Type_Specific_Block_Handle"},
+ {0, 0x92, "PID_State_Report"},
+ {0, 0x94, "Effect_Playing"},
+ {0, 0x95, "PID_Device_Control_Report"},
+ {0, 0x96, "PID_Device_Control"},
+ {0, 0x97, "DC_Enable_Actuators"},
+ {0, 0x98, "DC_Disable_Actuators"},
+ {0, 0x99, "DC_Stop_All_Effects"},
+ {0, 0x9A, "DC_Device_Reset"},
+ {0, 0x9B, "DC_Device_Pause"},
+ {0, 0x9C, "DC_Device_Continue"},
+ {0, 0x9F, "Device_Paused"},
+ {0, 0xA0, "Actuators_Enabled"},
+ {0, 0xA4, "Safety_Switch"},
+ {0, 0xA5, "Actuator_Override_Switch"},
+ {0, 0xA6, "Actuator_Power"},
+ {0, 0xA7, "Start_Delay"},
+ {0, 0xA8, "Parameter_Block_Size"},
+ {0, 0xA9, "Device_Managed_Pool"},
+ {0, 0xAA, "Shared_Parameter_Blocks"},
+ {0, 0xAB, "Create_New_Effect_Report"},
+ {0, 0xAC, "RAM_Pool_Available"},
+ { 0x84, 0, "Power Device" },
+ { 0x84, 0x02, "PresentStatus" },
+ { 0x84, 0x03, "ChangeStatus" },
+ { 0x84, 0x04, "UPS" },
+ { 0x84, 0x05, "PowerSupply" },
+ { 0x84, 0x10, "BatterySystem" },
+ { 0x84, 0x11, "BatterySystemID" },
+ { 0x84, 0x12, "Battery" },
+ { 0x84, 0x13, "BatteryID" },
+ { 0x84, 0x14, "Charger" },
+ { 0x84, 0x15, "ChargerID" },
+ { 0x84, 0x16, "PowerConverter" },
+ { 0x84, 0x17, "PowerConverterID" },
+ { 0x84, 0x18, "OutletSystem" },
+ { 0x84, 0x19, "OutletSystemID" },
+ { 0x84, 0x1a, "Input" },
+ { 0x84, 0x1b, "InputID" },
+ { 0x84, 0x1c, "Output" },
+ { 0x84, 0x1d, "OutputID" },
+ { 0x84, 0x1e, "Flow" },
+ { 0x84, 0x1f, "FlowID" },
+ { 0x84, 0x20, "Outlet" },
+ { 0x84, 0x21, "OutletID" },
+ { 0x84, 0x22, "Gang" },
+ { 0x84, 0x24, "PowerSummary" },
+ { 0x84, 0x25, "PowerSummaryID" },
+ { 0x84, 0x30, "Voltage" },
+ { 0x84, 0x31, "Current" },
+ { 0x84, 0x32, "Frequency" },
+ { 0x84, 0x33, "ApparentPower" },
+ { 0x84, 0x35, "PercentLoad" },
+ { 0x84, 0x40, "ConfigVoltage" },
+ { 0x84, 0x41, "ConfigCurrent" },
+ { 0x84, 0x43, "ConfigApparentPower" },
+ { 0x84, 0x53, "LowVoltageTransfer" },
+ { 0x84, 0x54, "HighVoltageTransfer" },
+ { 0x84, 0x56, "DelayBeforeStartup" },
+ { 0x84, 0x57, "DelayBeforeShutdown" },
+ { 0x84, 0x58, "Test" },
+ { 0x84, 0x5a, "AudibleAlarmControl" },
+ { 0x84, 0x60, "Present" },
+ { 0x84, 0x61, "Good" },
+ { 0x84, 0x62, "InternalFailure" },
+ { 0x84, 0x65, "Overload" },
+ { 0x84, 0x66, "OverCharged" },
+ { 0x84, 0x67, "OverTemperature" },
+ { 0x84, 0x68, "ShutdownRequested" },
+ { 0x84, 0x69, "ShutdownImminent" },
+ { 0x84, 0x6b, "SwitchOn/Off" },
+ { 0x84, 0x6c, "Switchable" },
+ { 0x84, 0x6d, "Used" },
+ { 0x84, 0x6e, "Boost" },
+ { 0x84, 0x73, "CommunicationLost" },
+ { 0x84, 0xfd, "iManufacturer" },
+ { 0x84, 0xfe, "iProduct" },
+ { 0x84, 0xff, "iSerialNumber" },
+ { 0x85, 0, "Battery System" },
+ { 0x85, 0x01, "SMBBatteryMode" },
+ { 0x85, 0x02, "SMBBatteryStatus" },
+ { 0x85, 0x03, "SMBAlarmWarning" },
+ { 0x85, 0x04, "SMBChargerMode" },
+ { 0x85, 0x05, "SMBChargerStatus" },
+ { 0x85, 0x06, "SMBChargerSpecInfo" },
+ { 0x85, 0x07, "SMBSelectorState" },
+ { 0x85, 0x08, "SMBSelectorPresets" },
+ { 0x85, 0x09, "SMBSelectorInfo" },
+ { 0x85, 0x29, "RemainingCapacityLimit" },
+ { 0x85, 0x2c, "CapacityMode" },
+ { 0x85, 0x42, "BelowRemainingCapacityLimit" },
+ { 0x85, 0x44, "Charging" },
+ { 0x85, 0x45, "Discharging" },
+ { 0x85, 0x4b, "NeedReplacement" },
+ { 0x85, 0x66, "RemainingCapacity" },
+ { 0x85, 0x68, "RunTimeToEmpty" },
+ { 0x85, 0x6a, "AverageTimeToFull" },
+ { 0x85, 0x83, "DesignCapacity" },
+ { 0x85, 0x85, "ManufacturerDate" },
+ { 0x85, 0x89, "iDeviceChemistry" },
+ { 0x85, 0x8b, "Rechargable" },
+ { 0x85, 0x8f, "iOEMInformation" },
+ { 0x85, 0x8d, "CapacityGranularity1" },
+ { 0x85, 0xd0, "ACPresent" },
+ /* pages 0xff00 to 0xffff are vendor-specific */
+ { 0xffff, 0, "Vendor-specific-FF" },
+ { 0, 0, NULL }
+};
+
+static void resolv_usage_page(unsigned page) {
+ const struct hid_usage_entry *p;
+
+ for (p = hid_usage_table; p->description; p++)
+ if (p->page == page) {
+ printk("%s", p->description);
+ return;
+ }
+ printk("%04x", page);
+}
+
+void hid_resolv_usage(unsigned usage) {
+ const struct hid_usage_entry *p;
+
+ resolv_usage_page(usage >> 16);
+ printk(".");
+ for (p = hid_usage_table; p->description; p++)
+ if (p->page == (usage >> 16)) {
+ for(++p; p->description && p->usage != 0; p++)
+ if (p->usage == (usage & 0xffff)) {
+ printk("%s", p->description);
+ return;
+ }
+ break;
+ }
+ printk("%04x", usage & 0xffff);
+}
+EXPORT_SYMBOL_GPL(hid_resolv_usage);
+
+__inline__ static void tab(int n) {
+ while (n--) printk(" ");
+}
+
+void hid_dump_field(struct hid_field *field, int n) {
+ int j;
+
+ if (field->physical) {
+ tab(n);
+ printk("Physical(");
+ hid_resolv_usage(field->physical); printk(")\n");
+ }
+ if (field->logical) {
+ tab(n);
+ printk("Logical(");
+ hid_resolv_usage(field->logical); printk(")\n");
+ }
+ tab(n); printk("Usage(%d)\n", field->maxusage);
+ for (j = 0; j < field->maxusage; j++) {
+ tab(n+2); hid_resolv_usage(field->usage[j].hid); printk("\n");
+ }
+ if (field->logical_minimum != field->logical_maximum) {
+ tab(n); printk("Logical Minimum(%d)\n", field->logical_minimum);
+ tab(n); printk("Logical Maximum(%d)\n", field->logical_maximum);
+ }
+ if (field->physical_minimum != field->physical_maximum) {
+ tab(n); printk("Physical Minimum(%d)\n", field->physical_minimum);
+ tab(n); printk("Physical Maximum(%d)\n", field->physical_maximum);
+ }
+ if (field->unit_exponent) {
+ tab(n); printk("Unit Exponent(%d)\n", field->unit_exponent);
+ }
+ if (field->unit) {
+ char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" };
+ char *units[5][8] = {
+ { "None", "None", "None", "None", "None", "None", "None", "None" },
+ { "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
+ { "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
+ { "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" },
+ { "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }
+ };
+
+ int i;
+ int sys;
+ __u32 data = field->unit;
+
+ /* First nibble tells us which system we're in. */
+ sys = data & 0xf;
+ data >>= 4;
+
+ if(sys > 4) {
+ tab(n); printk("Unit(Invalid)\n");
+ }
+ else {
+ int earlier_unit = 0;
+
+ tab(n); printk("Unit(%s : ", systems[sys]);
+
+ for (i=1 ; i<sizeof(__u32)*2 ; i++) {
+ char nibble = data & 0xf;
+ data >>= 4;
+ if (nibble != 0) {
+ if(earlier_unit++ > 0)
+ printk("*");
+ printk("%s", units[sys][i]);
+ if(nibble != 1) {
+ /* This is a _signed_ nibble(!) */
+
+ int val = nibble & 0x7;
+ if(nibble & 0x08)
+ val = -((0x7 & ~val) +1);
+ printk("^%d", val);
+ }
+ }
+ }
+ printk(")\n");
+ }
+ }
+ tab(n); printk("Report Size(%u)\n", field->report_size);
+ tab(n); printk("Report Count(%u)\n", field->report_count);
+ tab(n); printk("Report Offset(%u)\n", field->report_offset);
+
+ tab(n); printk("Flags( ");
+ j = field->flags;
+ printk("%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : "");
+ printk("%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array ");
+ printk("%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute ");
+ printk("%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : "");
+ printk("%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : "");
+ printk("%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPrefferedState " : "");
+ printk("%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : "");
+ printk("%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : "");
+ printk("%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : "");
+ printk(")\n");
+}
+EXPORT_SYMBOL_GPL(hid_dump_field);
+
+void hid_dump_device(struct hid_device *device) {
+ struct hid_report_enum *report_enum;
+ struct hid_report *report;
+ struct list_head *list;
+ unsigned i,k;
+ static char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
+
+ for (i = 0; i < HID_REPORT_TYPES; i++) {
+ report_enum = device->report_enum + i;
+ list = report_enum->report_list.next;
+ while (list != &report_enum->report_list) {
+ report = (struct hid_report *) list;
+ tab(2);
+ printk("%s", table[i]);
+ if (report->id)
+ printk("(%d)", report->id);
+ printk("[%s]", table[report->type]);
+ printk("\n");
+ for (k = 0; k < report->maxfield; k++) {
+ tab(4);
+ printk("Field(%d)\n", k);
+ hid_dump_field(report->field[k], 6);
+ }
+ list = list->next;
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(hid_dump_device);
+
+void hid_dump_input(struct hid_usage *usage, __s32 value) {
+ printk("hid-debug: input ");
+ hid_resolv_usage(usage->hid);
+ printk(" = %d\n", value);
+}
+EXPORT_SYMBOL_GPL(hid_dump_input);
+
+static char *events[EV_MAX + 1] = {
+ [EV_SYN] = "Sync", [EV_KEY] = "Key",
+ [EV_REL] = "Relative", [EV_ABS] = "Absolute",
+ [EV_MSC] = "Misc", [EV_LED] = "LED",
+ [EV_SND] = "Sound", [EV_REP] = "Repeat",
+ [EV_FF] = "ForceFeedback", [EV_PWR] = "Power",
+ [EV_FF_STATUS] = "ForceFeedbackStatus",
+};
+
+static char *syncs[2] = {
+ [SYN_REPORT] = "Report", [SYN_CONFIG] = "Config",
+};
+static char *keys[KEY_MAX + 1] = {
+ [KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc",
+ [KEY_1] = "1", [KEY_2] = "2",
+ [KEY_3] = "3", [KEY_4] = "4",
+ [KEY_5] = "5", [KEY_6] = "6",
+ [KEY_7] = "7", [KEY_8] = "8",
+ [KEY_9] = "9", [KEY_0] = "0",
+ [KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal",
+ [KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab",
+ [KEY_Q] = "Q", [KEY_W] = "W",
+ [KEY_E] = "E", [KEY_R] = "R",
+ [KEY_T] = "T", [KEY_Y] = "Y",
+ [KEY_U] = "U", [KEY_I] = "I",
+ [KEY_O] = "O", [KEY_P] = "P",
+ [KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace",
+ [KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl",
+ [KEY_A] = "A", [KEY_S] = "S",
+ [KEY_D] = "D", [KEY_F] = "F",
+ [KEY_G] = "G", [KEY_H] = "H",
+ [KEY_J] = "J", [KEY_K] = "K",
+ [KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon",
+ [KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave",
+ [KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash",
+ [KEY_Z] = "Z", [KEY_X] = "X",
+ [KEY_C] = "C", [KEY_V] = "V",
+ [KEY_B] = "B", [KEY_N] = "N",
+ [KEY_M] = "M", [KEY_COMMA] = "Comma",
+ [KEY_DOT] = "Dot", [KEY_SLASH] = "Slash",
+ [KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk",
+ [KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space",
+ [KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1",
+ [KEY_F2] = "F2", [KEY_F3] = "F3",
+ [KEY_F4] = "F4", [KEY_F5] = "F5",
+ [KEY_F6] = "F6", [KEY_F7] = "F7",
+ [KEY_F8] = "F8", [KEY_F9] = "F9",
+ [KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock",
+ [KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7",
+ [KEY_KP8] = "KP8", [KEY_KP9] = "KP9",
+ [KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4",
+ [KEY_KP5] = "KP5", [KEY_KP6] = "KP6",
+ [KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1",
+ [KEY_KP2] = "KP2", [KEY_KP3] = "KP3",
+ [KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot",
+ [KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd",
+ [KEY_F11] = "F11", [KEY_F12] = "F12",
+ [KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana",
+ [KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan",
+ [KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan",
+ [KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter",
+ [KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash",
+ [KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt",
+ [KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home",
+ [KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp",
+ [KEY_LEFT] = "Left", [KEY_RIGHT] = "Right",
+ [KEY_END] = "End", [KEY_DOWN] = "Down",
+ [KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert",
+ [KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro",
+ [KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown",
+ [KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power",
+ [KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus",
+ [KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma",
+ [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja",
+ [KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta",
+ [KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose",
+ [KEY_STOP] = "Stop", [KEY_AGAIN] = "Again",
+ [KEY_PROPS] = "Props", [KEY_UNDO] = "Undo",
+ [KEY_FRONT] = "Front", [KEY_COPY] = "Copy",
+ [KEY_OPEN] = "Open", [KEY_PASTE] = "Paste",
+ [KEY_FIND] = "Find", [KEY_CUT] = "Cut",
+ [KEY_HELP] = "Help", [KEY_MENU] = "Menu",
+ [KEY_CALC] = "Calc", [KEY_SETUP] = "Setup",
+ [KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp",
+ [KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile",
+ [KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer",
+ [KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2",
+ [KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS",
+ [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction",
+ [KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail",
+ [KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer",
+ [KEY_BACK] = "Back", [KEY_FORWARD] = "Forward",
+ [KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD",
+ [KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong",
+ [KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong",
+ [KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record",
+ [KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone",
+ [KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config",
+ [KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh",
+ [KEY_EXIT] = "Exit", [KEY_MOVE] = "Move",
+ [KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp",
+ [KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis",
+ [KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New",
+ [KEY_REDO] = "Redo", [KEY_F13] = "F13",
+ [KEY_F14] = "F14", [KEY_F15] = "F15",
+ [KEY_F16] = "F16", [KEY_F17] = "F17",
+ [KEY_F18] = "F18", [KEY_F19] = "F19",
+ [KEY_F20] = "F20", [KEY_F21] = "F21",
+ [KEY_F22] = "F22", [KEY_F23] = "F23",
+ [KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD",
+ [KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3",
+ [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend",
+ [KEY_CLOSE] = "Close", [KEY_PLAY] = "Play",
+ [KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost",
+ [KEY_PRINT] = "Print", [KEY_HP] = "HP",
+ [KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound",
+ [KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email",
+ [KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search",
+ [KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance",
+ [KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop",
+ [KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel",
+ [KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp",
+ [KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown",
+ [BTN_0] = "Btn0", [BTN_1] = "Btn1",
+ [BTN_2] = "Btn2", [BTN_3] = "Btn3",
+ [BTN_4] = "Btn4", [BTN_5] = "Btn5",
+ [BTN_6] = "Btn6", [BTN_7] = "Btn7",
+ [BTN_8] = "Btn8", [BTN_9] = "Btn9",
+ [BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn",
+ [BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn",
+ [BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn",
+ [BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn",
+ [BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn",
+ [BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn",
+ [BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn",
+ [BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2",
+ [BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4",
+ [BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6",
+ [BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA",
+ [BTN_B] = "BtnB", [BTN_C] = "BtnC",
+ [BTN_X] = "BtnX", [BTN_Y] = "BtnY",
+ [BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL",
+ [BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2",
+ [BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect",
+ [BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode",
+ [BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR",
+ [BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber",
+ [BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil",
+ [BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger",
+ [BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens",
+ [BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus",
+ [BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap",
+ [BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn",
+ [BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok",
+ [KEY_SELECT] = "Select", [KEY_GOTO] = "Goto",
+ [KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2",
+ [KEY_OPTION] = "Option", [KEY_INFO] = "Info",
+ [KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor",
+ [KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program",
+ [KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites",
+ [KEY_EPG] = "EPG", [KEY_PVR] = "PVR",
+ [KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language",
+ [KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle",
+ [KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom",
+ [KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard",
+ [KEY_SCREEN] = "Screen", [KEY_PC] = "PC",
+ [KEY_TV] = "TV", [KEY_TV2] = "TV2",
+ [KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2",
+ [KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2",
+ [KEY_CD] = "CD", [KEY_TAPE] = "Tape",
+ [KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner",
+ [KEY_PLAYER] = "Player", [KEY_TEXT] = "Text",
+ [KEY_DVD] = "DVD", [KEY_AUX] = "Aux",
+ [KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio",
+ [KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory",
+ [KEY_LIST] = "List", [KEY_MEMO] = "Memo",
+ [KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red",
+ [KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow",
+ [KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp",
+ [KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First",
+ [KEY_LAST] = "Last", [KEY_AB] = "AB",
+ [KEY_NEXT] = "Next", [KEY_RESTART] = "Restart",
+ [KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle",
+ [KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous",
+ [KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN",
+ [KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL",
+ [KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine",
+ [KEY_DEL_LINE] = "DeleteLine",
+ [KEY_SEND] = "Send", [KEY_REPLY] = "Reply",
+ [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save",
+ [KEY_DOCUMENTS] = "Documents",
+ [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC",
+ [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2",
+ [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D",
+ [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F",
+ [KEY_FN_S] = "Fn+S",
+ [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2",
+ [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4",
+ [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6",
+ [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8",
+ [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10",
+ [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12",
+ [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle",
+ [KEY_KBDILLUMDOWN] = "KbdIlluminationDown",
+ [KEY_KBDILLUMUP] = "KbdIlluminationUp",
+ [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode",
+};
+
+static char *relatives[REL_MAX + 1] = {
+ [REL_X] = "X", [REL_Y] = "Y",
+ [REL_Z] = "Z", [REL_RX] = "Rx",
+ [REL_RY] = "Ry", [REL_RZ] = "Rz",
+ [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial",
+ [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc",
+};
+
+static char *absolutes[ABS_MAX + 1] = {
+ [ABS_X] = "X", [ABS_Y] = "Y",
+ [ABS_Z] = "Z", [ABS_RX] = "Rx",
+ [ABS_RY] = "Ry", [ABS_RZ] = "Rz",
+ [ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder",
+ [ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas",
+ [ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X",
+ [ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X",
+ [ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X",
+ [ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X",
+ [ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure",
+ [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt",
+ [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "Tool Width",
+ [ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc",
+};
+
+static char *misc[MSC_MAX + 1] = {
+ [MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled",
+ [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData"
+};
+
+static char *leds[LED_MAX + 1] = {
+ [LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock",
+ [LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose",
+ [LED_KANA] = "Kana", [LED_SLEEP] = "Sleep",
+ [LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute",
+ [LED_MISC] = "Misc",
+};
+
+static char *repeats[REP_MAX + 1] = {
+ [REP_DELAY] = "Delay", [REP_PERIOD] = "Period"
+};
+
+static char *sounds[SND_MAX + 1] = {
+ [SND_CLICK] = "Click", [SND_BELL] = "Bell",
+ [SND_TONE] = "Tone"
+};
+
+static char **names[EV_MAX + 1] = {
+ [EV_SYN] = syncs, [EV_KEY] = keys,
+ [EV_REL] = relatives, [EV_ABS] = absolutes,
+ [EV_MSC] = misc, [EV_LED] = leds,
+ [EV_SND] = sounds, [EV_REP] = repeats,
+};
+
+void hid_resolv_event(__u8 type, __u16 code) {
+
+ printk("%s.%s", events[type] ? events[type] : "?",
+ names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
+}
+EXPORT_SYMBOL_GPL(hid_resolv_event);
+
#include <linux/slab.h>
#include <linux/kernel.h>
-#undef DEBUG
-
#include <linux/hid.h>
+#include <linux/hid-debug.h>
static int hid_pb_fnmode = 1;
module_param_named(pb_fnmode, hid_pb_fnmode, int, 0644);
field->hidinput = hidinput;
-#ifdef DEBUG
+#ifdef CONFIG_HID_DEBUG
printk(KERN_DEBUG "Mapping: ");
- resolv_usage(usage->hid);
+ hid_resolv_usage(usage->hid);
printk(" ---> ");
#endif
field->dpad = usage->code;
}
-#ifdef DEBUG
- resolv_event(usage->type, usage->code);
+ hid_resolv_event(usage->type, usage->code);
+#ifdef CONFIG_HID_DEBUG
printk("\n");
#endif
return;
ignore:
-#ifdef DEBUG
+#ifdef CONFIG_HID_DEBUG
printk("IGNORED\n");
#endif
return;
}
EXPORT_SYMBOL_GPL(hidinput_find_field);
+static int hidinput_open(struct input_dev *dev)
+{
+ struct hid_device *hid = dev->private;
+ return hid->hid_open(hid);
+}
+
+static void hidinput_close(struct input_dev *dev)
+{
+ struct hid_device *hid = dev->private;
+ hid->hid_close(hid);
+}
+
/*
* Register the input device; print a message.
* Configure the input layer interface
struct hid_input *hidinput = NULL;
struct input_dev *input_dev;
int i, j, k;
+ int max_report_type = HID_OUTPUT_REPORT;
INIT_LIST_HEAD(&hid->inputs);
if (i == hid->maxcollection)
return -1;
- for (k = HID_INPUT_REPORT; k <= HID_OUTPUT_REPORT; k++)
+ if (hid->quirks & HID_QUIRK_SKIP_OUTPUT_REPORTS)
+ max_report_type = HID_INPUT_REPORT;
+
+ for (k = HID_INPUT_REPORT; k <= max_report_type; k++)
list_for_each_entry(report, &hid->report_enum[k].report_list, list) {
if (!report->maxfield)
input_dev->private = hid;
input_dev->event = hid->hidinput_input_event;
- input_dev->open = hid->hidinput_open;
- input_dev->close = hid->hidinput_close;
+ input_dev->open = hidinput_open;
+ input_dev->close = hidinput_close;
input_dev->name = hid->name;
input_dev->phys = hid->phys;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb.h>
#include <linux/usb/otg.h>
Support for Compact Flash cards, outboard IDE disks, tape drives,
and CD-ROM drives connected through a PCMCIA card.
+config BLK_DEV_DELKIN
+ tristate "Cardbus IDE support (Delkin/ASKA/Workbit)"
+ depends on CARDBUS && PCI
+ help
+ Support for Delkin, ASKA, and Workbit Cardbus CompactFlash
+ Adapters. This may also work for similar SD and XD adapters.
+
config BLK_DEV_IDECD
tristate "Include IDE/ATAPI CDROM support"
---help---
If both this SCSI emulation and native ATAPI support are compiled
into the kernel, the native support will be used.
+config BLK_DEV_IDEACPI
+ bool "IDE ACPI support"
+ depends on ACPI
+ ---help---
+ Implement ACPI support for generic IDE devices. On modern
+ machines ACPI support is required to properly handle ACPI S3 states.
+
config IDE_TASK_IOCTL
bool "IDE Taskfile Access"
help
the kernel to change PIO, DMA and UDMA speeds and to configure
the chip to optimum performance.
+config BLK_DEV_IT8213
+ tristate "IT8213 IDE support"
+ help
+ This driver adds support for the ITE 8213 IDE controller.
+
config BLK_DEV_IT821X
tristate "IT821X IDE support"
help
This allows the kernel to change PIO, DMA and UDMA speeds and to
configure the chip to optimum performance.
+config BLK_DEV_TC86C001
+ tristate "Toshiba TC86C001 support"
+ help
+ This driver adds support for Toshiba TC86C001 GOKU-S chip.
+
endif
config BLK_DEV_IDE_PMAC
ide-core-$(CONFIG_BLK_DEV_IDEDMA) += ide-dma.o
ide-core-$(CONFIG_PROC_FS) += ide-proc.o
ide-core-$(CONFIG_BLK_DEV_IDEPNP) += ide-pnp.o
+ide-core-$(CONFIG_BLK_DEV_IDEACPI) += ide-acpi.o
# built-in only drivers from arm/
ide-core-$(CONFIG_IDE_ARM) += arm/ide_arm.o
--- /dev/null
+/*
+ * ide-acpi.c
+ * Provides ACPI support for IDE drives.
+ *
+ * Copyright (C) 2005 Intel Corp.
+ * Copyright (C) 2005 Randy Dunlap
+ * Copyright (C) 2006 SUSE Linux Products GmbH
+ * Copyright (C) 2006 Hannes Reinecke
+ */
+
+#include <linux/ata.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <acpi/acpi.h>
+#include <linux/ide.h>
+#include <linux/pci.h>
+
+#include <acpi/acpi_bus.h>
+#include <acpi/acnames.h>
+#include <acpi/acnamesp.h>
+#include <acpi/acparser.h>
+#include <acpi/acexcep.h>
+#include <acpi/acmacros.h>
+#include <acpi/actypes.h>
+
+#define REGS_PER_GTF 7
+struct taskfile_array {
+ u8 tfa[REGS_PER_GTF]; /* regs. 0x1f1 - 0x1f7 */
+};
+
+struct GTM_buffer {
+ u32 PIO_speed0;
+ u32 DMA_speed0;
+ u32 PIO_speed1;
+ u32 DMA_speed1;
+ u32 GTM_flags;
+};
+
+struct ide_acpi_drive_link {
+ ide_drive_t *drive;
+ acpi_handle obj_handle;
+ u8 idbuff[512];
+};
+
+struct ide_acpi_hwif_link {
+ ide_hwif_t *hwif;
+ acpi_handle obj_handle;
+ struct GTM_buffer gtm;
+ struct ide_acpi_drive_link master;
+ struct ide_acpi_drive_link slave;
+};
+
+#undef DEBUGGING
+/* note: adds function name and KERN_DEBUG */
+#ifdef DEBUGGING
+#define DEBPRINT(fmt, args...) \
+ printk(KERN_DEBUG "%s: " fmt, __FUNCTION__, ## args)
+#else
+#define DEBPRINT(fmt, args...) do {} while (0)
+#endif /* DEBUGGING */
+
+extern int ide_noacpi;
+extern int ide_noacpitfs;
+extern int ide_noacpionboot;
+
+/**
+ * ide_get_dev_handle - finds acpi_handle and PCI device.function
+ * @dev: device to locate
+ * @handle: returned acpi_handle for @dev
+ * @pcidevfn: return PCI device.func for @dev
+ *
+ * Returns the ACPI object handle to the corresponding PCI device.
+ *
+ * Returns 0 on success, <0 on error.
+ */
+static int ide_get_dev_handle(struct device *dev, acpi_handle *handle,
+ acpi_integer *pcidevfn)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ unsigned int bus, devnum, func;
+ acpi_integer addr;
+ acpi_handle dev_handle;
+ struct acpi_buffer buffer = {.length = ACPI_ALLOCATE_BUFFER,
+ .pointer = NULL};
+ acpi_status status;
+ struct acpi_device_info *dinfo = NULL;
+ int ret = -ENODEV;
+
+ bus = pdev->bus->number;
+ devnum = PCI_SLOT(pdev->devfn);
+ func = PCI_FUNC(pdev->devfn);
+ /* ACPI _ADR encoding for PCI bus: */
+ addr = (acpi_integer)(devnum << 16 | func);
+
+ DEBPRINT("ENTER: pci %02x:%02x.%01x\n", bus, devnum, func);
+
+ dev_handle = DEVICE_ACPI_HANDLE(dev);
+ if (!dev_handle) {
+ DEBPRINT("no acpi handle for device\n");
+ goto err;
+ }
+
+ status = acpi_get_object_info(dev_handle, &buffer);
+ if (ACPI_FAILURE(status)) {
+ DEBPRINT("get_object_info for device failed\n");
+ goto err;
+ }
+ dinfo = buffer.pointer;
+ if (dinfo && (dinfo->valid & ACPI_VALID_ADR) &&
+ dinfo->address == addr) {
+ *pcidevfn = addr;
+ *handle = dev_handle;
+ } else {
+ DEBPRINT("get_object_info for device has wrong "
+ " address: %llu, should be %u\n",
+ dinfo ? (unsigned long long)dinfo->address : -1ULL,
+ (unsigned int)addr);
+ goto err;
+ }
+
+ DEBPRINT("for dev=0x%x.%x, addr=0x%llx, *handle=0x%p\n",
+ devnum, func, (unsigned long long)addr, *handle);
+ ret = 0;
+err:
+ kfree(dinfo);
+ return ret;
+}
+
+/**
+ * ide_acpi_hwif_get_handle - Get ACPI object handle for a given hwif
+ * @hwif: device to locate
+ *
+ * Retrieves the object handle for a given hwif.
+ *
+ * Returns handle on success, 0 on error.
+ */
+static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif)
+{
+ struct device *dev = hwif->gendev.parent;
+ acpi_handle dev_handle;
+ acpi_integer pcidevfn;
+ acpi_handle chan_handle;
+ int err;
+
+ DEBPRINT("ENTER: device %s\n", hwif->name);
+
+ if (!dev) {
+ DEBPRINT("no PCI device for %s\n", hwif->name);
+ return NULL;
+ }
+
+ err = ide_get_dev_handle(dev, &dev_handle, &pcidevfn);
+ if (err < 0) {
+ DEBPRINT("ide_get_dev_handle failed (%d)\n", err);
+ return NULL;
+ }
+
+ /* get child objects of dev_handle == channel objects,
+ * + _their_ children == drive objects */
+ /* channel is hwif->channel */
+ chan_handle = acpi_get_child(dev_handle, hwif->channel);
+ DEBPRINT("chan adr=%d: handle=0x%p\n",
+ hwif->channel, chan_handle);
+
+ return chan_handle;
+}
+
+/**
+ * ide_acpi_drive_get_handle - Get ACPI object handle for a given drive
+ * @drive: device to locate
+ *
+ * Retrieves the object handle of a given drive. According to the ACPI
+ * spec the drive is a child of the hwif.
+ *
+ * Returns handle on success, 0 on error.
+ */
+static acpi_handle ide_acpi_drive_get_handle(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ int port;
+ acpi_handle drive_handle;
+
+ if (!hwif->acpidata)
+ return NULL;
+
+ if (!hwif->acpidata->obj_handle)
+ return NULL;
+
+ port = hwif->channel ? drive->dn - 2: drive->dn;
+
+ DEBPRINT("ENTER: %s at channel#: %d port#: %d\n",
+ drive->name, hwif->channel, port);
+
+
+ /* TBD: could also check ACPI object VALID bits */
+ drive_handle = acpi_get_child(hwif->acpidata->obj_handle, port);
+ DEBPRINT("drive %s handle 0x%p\n", drive->name, drive_handle);
+
+ return drive_handle;
+}
+
+/**
+ * do_drive_get_GTF - get the drive bootup default taskfile settings
+ * @drive: the drive for which the taskfile settings should be retrieved
+ * @gtf_length: number of bytes of _GTF data returned at @gtf_address
+ * @gtf_address: buffer containing _GTF taskfile arrays
+ *
+ * The _GTF method has no input parameters.
+ * It returns a variable number of register set values (registers
+ * hex 1F1..1F7, taskfiles).
+ * The <variable number> is not known in advance, so have ACPI-CA
+ * allocate the buffer as needed and return it, then free it later.
+ *
+ * The returned @gtf_length and @gtf_address are only valid if the
+ * function return value is 0.
+ */
+static int do_drive_get_GTF(ide_drive_t *drive,
+ unsigned int *gtf_length, unsigned long *gtf_address,
+ unsigned long *obj_loc)
+{
+ acpi_status status;
+ struct acpi_buffer output;
+ union acpi_object *out_obj;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct device *dev = hwif->gendev.parent;
+ int err = -ENODEV;
+ int port;
+
+ *gtf_length = 0;
+ *gtf_address = 0UL;
+ *obj_loc = 0UL;
+
+ if (ide_noacpi)
+ return 0;
+
+ if (!dev) {
+ DEBPRINT("no PCI device for %s\n", hwif->name);
+ goto out;
+ }
+
+ if (!hwif->acpidata) {
+ DEBPRINT("no ACPI data for %s\n", hwif->name);
+ goto out;
+ }
+
+ port = hwif->channel ? drive->dn - 2: drive->dn;
+
+ if (!drive->acpidata) {
+ if (port == 0) {
+ drive->acpidata = &hwif->acpidata->master;
+ hwif->acpidata->master.drive = drive;
+ } else {
+ drive->acpidata = &hwif->acpidata->slave;
+ hwif->acpidata->slave.drive = drive;
+ }
+ }
+
+ DEBPRINT("ENTER: %s at %s, port#: %d, hard_port#: %d\n",
+ hwif->name, dev->bus_id, port, hwif->channel);
+
+ if (!drive->present) {
+ DEBPRINT("%s drive %d:%d not present\n",
+ hwif->name, hwif->channel, port);
+ goto out;
+ }
+
+ /* Get this drive's _ADR info. if not already known. */
+ if (!drive->acpidata->obj_handle) {
+ drive->acpidata->obj_handle = ide_acpi_drive_get_handle(drive);
+ if (!drive->acpidata->obj_handle) {
+ DEBPRINT("No ACPI object found for %s\n",
+ drive->name);
+ goto out;
+ }
+ }
+
+ /* Setting up output buffer */
+ output.length = ACPI_ALLOCATE_BUFFER;
+ output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
+
+ /* _GTF has no input parameters */
+ err = -EIO;
+ status = acpi_evaluate_object(drive->acpidata->obj_handle, "_GTF",
+ NULL, &output);
+ if (ACPI_FAILURE(status)) {
+ printk(KERN_DEBUG
+ "%s: Run _GTF error: status = 0x%x\n",
+ __FUNCTION__, status);
+ goto out;
+ }
+
+ if (!output.length || !output.pointer) {
+ DEBPRINT("Run _GTF: "
+ "length or ptr is NULL (0x%llx, 0x%p)\n",
+ (unsigned long long)output.length,
+ output.pointer);
+ goto out;
+ }
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ DEBPRINT("Run _GTF: error: "
+ "expected object type of ACPI_TYPE_BUFFER, "
+ "got 0x%x\n", out_obj->type);
+ err = -ENOENT;
+ kfree(output.pointer);
+ goto out;
+ }
+
+ if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
+ out_obj->buffer.length % REGS_PER_GTF) {
+ printk(KERN_ERR
+ "%s: unexpected GTF length (%d) or addr (0x%p)\n",
+ __FUNCTION__, out_obj->buffer.length,
+ out_obj->buffer.pointer);
+ err = -ENOENT;
+ kfree(output.pointer);
+ goto out;
+ }
+
+ *gtf_length = out_obj->buffer.length;
+ *gtf_address = (unsigned long)out_obj->buffer.pointer;
+ *obj_loc = (unsigned long)out_obj;
+ DEBPRINT("returning gtf_length=%d, gtf_address=0x%lx, obj_loc=0x%lx\n",
+ *gtf_length, *gtf_address, *obj_loc);
+ err = 0;
+out:
+ return err;
+}
+
+/**
+ * taskfile_load_raw - send taskfile registers to drive
+ * @drive: drive to which output is sent
+ * @gtf: raw ATA taskfile register set (0x1f1 - 0x1f7)
+ *
+ * Outputs IDE taskfile to the drive.
+ */
+static int taskfile_load_raw(ide_drive_t *drive,
+ const struct taskfile_array *gtf)
+{
+ ide_task_t args;
+ int err = 0;
+
+ DEBPRINT("(0x1f1-1f7): hex: "
+ "%02x %02x %02x %02x %02x %02x %02x\n",
+ gtf->tfa[0], gtf->tfa[1], gtf->tfa[2],
+ gtf->tfa[3], gtf->tfa[4], gtf->tfa[5], gtf->tfa[6]);
+
+ memset(&args, 0, sizeof(ide_task_t));
+ args.command_type = IDE_DRIVE_TASK_NO_DATA;
+ args.data_phase = TASKFILE_IN;
+ args.handler = &task_no_data_intr;
+
+ /* convert gtf to IDE Taskfile */
+ args.tfRegister[1] = gtf->tfa[0]; /* 0x1f1 */
+ args.tfRegister[2] = gtf->tfa[1]; /* 0x1f2 */
+ args.tfRegister[3] = gtf->tfa[2]; /* 0x1f3 */
+ args.tfRegister[4] = gtf->tfa[3]; /* 0x1f4 */
+ args.tfRegister[5] = gtf->tfa[4]; /* 0x1f5 */
+ args.tfRegister[6] = gtf->tfa[5]; /* 0x1f6 */
+ args.tfRegister[7] = gtf->tfa[6]; /* 0x1f7 */
+
+ if (ide_noacpitfs) {
+ DEBPRINT("_GTF execution disabled\n");
+ return err;
+ }
+
+ err = ide_raw_taskfile(drive, &args, NULL);
+ if (err)
+ printk(KERN_ERR "%s: ide_raw_taskfile failed: %u\n",
+ __FUNCTION__, err);
+
+ return err;
+}
+
+/**
+ * do_drive_set_taskfiles - write the drive taskfile settings from _GTF
+ * @drive: the drive to which the taskfile command should be sent
+ * @gtf_length: total number of bytes of _GTF taskfiles
+ * @gtf_address: location of _GTF taskfile arrays
+ *
+ * Write {gtf_address, length gtf_length} in groups of
+ * REGS_PER_GTF bytes.
+ */
+static int do_drive_set_taskfiles(ide_drive_t *drive,
+ unsigned int gtf_length,
+ unsigned long gtf_address)
+{
+ int rc = -ENODEV, err;
+ int gtf_count = gtf_length / REGS_PER_GTF;
+ int ix;
+ struct taskfile_array *gtf;
+
+ if (ide_noacpi)
+ return 0;
+
+ DEBPRINT("ENTER: %s, hard_port#: %d\n", drive->name, drive->dn);
+
+ if (!drive->present)
+ goto out;
+ if (!gtf_count) /* shouldn't be here */
+ goto out;
+
+ DEBPRINT("total GTF bytes=%u (0x%x), gtf_count=%d, addr=0x%lx\n",
+ gtf_length, gtf_length, gtf_count, gtf_address);
+
+ if (gtf_length % REGS_PER_GTF) {
+ printk(KERN_ERR "%s: unexpected GTF length (%d)\n",
+ __FUNCTION__, gtf_length);
+ goto out;
+ }
+
+ rc = 0;
+ for (ix = 0; ix < gtf_count; ix++) {
+ gtf = (struct taskfile_array *)
+ (gtf_address + ix * REGS_PER_GTF);
+
+ /* send all TaskFile registers (0x1f1-0x1f7) *in*that*order* */
+ err = taskfile_load_raw(drive, gtf);
+ if (err)
+ rc = err;
+ }
+
+out:
+ return rc;
+}
+
+/**
+ * ide_acpi_exec_tfs - get then write drive taskfile settings
+ * @drive: the drive for which the taskfile settings should be
+ * written.
+ *
+ * According to the ACPI spec this should be called after _STM
+ * has been evaluated for the interface. Some ACPI vendors interpret
+ * that as a hard requirement and modify the taskfile according
+ * to the Identify Drive information passed down with _STM.
+ * So one should really make sure to call this only after _STM has
+ * been executed.
+ */
+int ide_acpi_exec_tfs(ide_drive_t *drive)
+{
+ int ret;
+ unsigned int gtf_length;
+ unsigned long gtf_address;
+ unsigned long obj_loc;
+
+ if (ide_noacpi)
+ return 0;
+
+ DEBPRINT("call get_GTF, drive=%s port=%d\n", drive->name, drive->dn);
+
+ ret = do_drive_get_GTF(drive, >f_length, >f_address, &obj_loc);
+ if (ret < 0) {
+ DEBPRINT("get_GTF error (%d)\n", ret);
+ return ret;
+ }
+
+ DEBPRINT("call set_taskfiles, drive=%s\n", drive->name);
+
+ ret = do_drive_set_taskfiles(drive, gtf_length, gtf_address);
+ kfree((void *)obj_loc);
+ if (ret < 0) {
+ DEBPRINT("set_taskfiles error (%d)\n", ret);
+ }
+
+ DEBPRINT("ret=%d\n", ret);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(ide_acpi_exec_tfs);
+
+/**
+ * ide_acpi_get_timing - get the channel (controller) timings
+ * @hwif: target IDE interface (channel)
+ *
+ * This function executes the _GTM ACPI method for the target channel.
+ *
+ */
+void ide_acpi_get_timing(ide_hwif_t *hwif)
+{
+ acpi_status status;
+ struct acpi_buffer output;
+ union acpi_object *out_obj;
+
+ if (ide_noacpi)
+ return;
+
+ DEBPRINT("ENTER:\n");
+
+ if (!hwif->acpidata) {
+ DEBPRINT("no ACPI data for %s\n", hwif->name);
+ return;
+ }
+
+ /* Setting up output buffer for _GTM */
+ output.length = ACPI_ALLOCATE_BUFFER;
+ output.pointer = NULL; /* ACPI-CA sets this; save/free it later */
+
+ /* _GTM has no input parameters */
+ status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_GTM",
+ NULL, &output);
+
+ DEBPRINT("_GTM status: %d, outptr: 0x%p, outlen: 0x%llx\n",
+ status, output.pointer,
+ (unsigned long long)output.length);
+
+ if (ACPI_FAILURE(status)) {
+ DEBPRINT("Run _GTM error: status = 0x%x\n", status);
+ return;
+ }
+
+ if (!output.length || !output.pointer) {
+ DEBPRINT("Run _GTM: length or ptr is NULL (0x%llx, 0x%p)\n",
+ (unsigned long long)output.length,
+ output.pointer);
+ kfree(output.pointer);
+ return;
+ }
+
+ out_obj = output.pointer;
+ if (out_obj->type != ACPI_TYPE_BUFFER) {
+ kfree(output.pointer);
+ DEBPRINT("Run _GTM: error: "
+ "expected object type of ACPI_TYPE_BUFFER, "
+ "got 0x%x\n", out_obj->type);
+ return;
+ }
+
+ if (!out_obj->buffer.length || !out_obj->buffer.pointer ||
+ out_obj->buffer.length != sizeof(struct GTM_buffer)) {
+ kfree(output.pointer);
+ printk(KERN_ERR
+ "%s: unexpected _GTM length (0x%x)[should be 0x%zx] or "
+ "addr (0x%p)\n",
+ __FUNCTION__, out_obj->buffer.length,
+ sizeof(struct GTM_buffer), out_obj->buffer.pointer);
+ return;
+ }
+
+ memcpy(&hwif->acpidata->gtm, out_obj->buffer.pointer,
+ sizeof(struct GTM_buffer));
+
+ DEBPRINT("_GTM info: ptr: 0x%p, len: 0x%x, exp.len: 0x%Zx\n",
+ out_obj->buffer.pointer, out_obj->buffer.length,
+ sizeof(struct GTM_buffer));
+
+ DEBPRINT("_GTM fields: 0x%x, 0x%x, 0x%x, 0x%x, 0x%x\n",
+ hwif->acpidata->gtm.PIO_speed0,
+ hwif->acpidata->gtm.DMA_speed0,
+ hwif->acpidata->gtm.PIO_speed1,
+ hwif->acpidata->gtm.DMA_speed1,
+ hwif->acpidata->gtm.GTM_flags);
+
+ kfree(output.pointer);
+}
+EXPORT_SYMBOL_GPL(ide_acpi_get_timing);
+
+/**
+ * ide_acpi_push_timing - set the channel (controller) timings
+ * @hwif: target IDE interface (channel)
+ *
+ * This function executes the _STM ACPI method for the target channel.
+ *
+ * _STM requires Identify Drive data, which has to passed as an argument.
+ * Unfortunately hd_driveid is a mangled version which we can't readily
+ * use; hence we'll get the information afresh.
+ */
+void ide_acpi_push_timing(ide_hwif_t *hwif)
+{
+ acpi_status status;
+ struct acpi_object_list input;
+ union acpi_object in_params[3];
+ struct ide_acpi_drive_link *master = &hwif->acpidata->master;
+ struct ide_acpi_drive_link *slave = &hwif->acpidata->slave;
+
+ if (ide_noacpi)
+ return;
+
+ DEBPRINT("ENTER:\n");
+
+ if (!hwif->acpidata) {
+ DEBPRINT("no ACPI data for %s\n", hwif->name);
+ return;
+ }
+
+ /* Give the GTM buffer + drive Identify data to the channel via the
+ * _STM method: */
+ /* setup input parameters buffer for _STM */
+ input.count = 3;
+ input.pointer = in_params;
+ in_params[0].type = ACPI_TYPE_BUFFER;
+ in_params[0].buffer.length = sizeof(struct GTM_buffer);
+ in_params[0].buffer.pointer = (u8 *)&hwif->acpidata->gtm;
+ in_params[1].type = ACPI_TYPE_BUFFER;
+ in_params[1].buffer.length = sizeof(struct hd_driveid);
+ in_params[1].buffer.pointer = (u8 *)&master->idbuff;
+ in_params[2].type = ACPI_TYPE_BUFFER;
+ in_params[2].buffer.length = sizeof(struct hd_driveid);
+ in_params[2].buffer.pointer = (u8 *)&slave->idbuff;
+ /* Output buffer: _STM has no output */
+
+ status = acpi_evaluate_object(hwif->acpidata->obj_handle, "_STM",
+ &input, NULL);
+
+ if (ACPI_FAILURE(status)) {
+ DEBPRINT("Run _STM error: status = 0x%x\n", status);
+ }
+ DEBPRINT("_STM status: %d\n", status);
+}
+EXPORT_SYMBOL_GPL(ide_acpi_push_timing);
+
+/**
+ * ide_acpi_init - initialize the ACPI link for an IDE interface
+ * @hwif: target IDE interface (channel)
+ *
+ * The ACPI spec is not quite clear when the drive identify buffer
+ * should be obtained. Calling IDENTIFY DEVICE during shutdown
+ * is not the best of ideas as the drive might already being put to
+ * sleep. And obviously we can't call it during resume.
+ * So we get the information during startup; but this means that
+ * any changes during run-time will be lost after resume.
+ */
+void ide_acpi_init(ide_hwif_t *hwif)
+{
+ int unit;
+ int err;
+ struct ide_acpi_drive_link *master;
+ struct ide_acpi_drive_link *slave;
+
+ hwif->acpidata = kzalloc(sizeof(struct ide_acpi_hwif_link), GFP_KERNEL);
+ if (!hwif->acpidata)
+ return;
+
+ hwif->acpidata->obj_handle = ide_acpi_hwif_get_handle(hwif);
+ if (!hwif->acpidata->obj_handle) {
+ DEBPRINT("no ACPI object for %s found\n", hwif->name);
+ kfree(hwif->acpidata);
+ hwif->acpidata = NULL;
+ return;
+ }
+
+ /*
+ * The ACPI spec mandates that we send information
+ * for both drives, regardless whether they are connected
+ * or not.
+ */
+ hwif->acpidata->master.drive = &hwif->drives[0];
+ hwif->drives[0].acpidata = &hwif->acpidata->master;
+ master = &hwif->acpidata->master;
+
+ hwif->acpidata->slave.drive = &hwif->drives[1];
+ hwif->drives[1].acpidata = &hwif->acpidata->slave;
+ slave = &hwif->acpidata->slave;
+
+
+ /*
+ * Send IDENTIFY for each drive
+ */
+ if (master->drive->present) {
+ err = taskfile_lib_get_identify(master->drive, master->idbuff);
+ if (err) {
+ DEBPRINT("identify device %s failed (%d)\n",
+ master->drive->name, err);
+ }
+ }
+
+ if (slave->drive->present) {
+ err = taskfile_lib_get_identify(slave->drive, slave->idbuff);
+ if (err) {
+ DEBPRINT("identify device %s failed (%d)\n",
+ slave->drive->name, err);
+ }
+ }
+
+ if (ide_noacpionboot) {
+ DEBPRINT("ACPI methods disabled on boot\n");
+ return;
+ }
+
+ /*
+ * ACPI requires us to call _STM on startup
+ */
+ ide_acpi_get_timing(hwif);
+ ide_acpi_push_timing(hwif);
+
+ for (unit = 0; unit < MAX_DRIVES; ++unit) {
+ ide_drive_t *drive = &hwif->drives[unit];
+
+ if (drive->present) {
+ /* Execute ACPI startup code */
+ ide_acpi_exec_tfs(drive);
+ }
+ }
+}
+EXPORT_SYMBOL_GPL(ide_acpi_init);
done:
init_gendisk(hwif);
+
+ ide_acpi_init(hwif);
+
hwif->present = 1; /* success */
return 1;
EXPORT_SYMBOL(noautodma);
+#ifdef CONFIG_BLK_DEV_IDEACPI
+int ide_noacpi = 0;
+int ide_noacpitfs = 1;
+int ide_noacpionboot = 1;
+#endif
+
/*
* This is declared extern in ide.h, for access by other IDE modules:
*/
static int generic_ide_suspend(struct device *dev, pm_message_t mesg)
{
ide_drive_t *drive = dev->driver_data;
+ ide_hwif_t *hwif = HWIF(drive);
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ /* Call ACPI _GTM only once */
+ if (!(drive->dn % 2))
+ ide_acpi_get_timing(hwif);
+
memset(&rq, 0, sizeof(rq));
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
static int generic_ide_resume(struct device *dev)
{
ide_drive_t *drive = dev->driver_data;
+ ide_hwif_t *hwif = HWIF(drive);
struct request rq;
struct request_pm_state rqpm;
ide_task_t args;
+ /* Call ACPI _STM only once */
+ if (!(drive->dn % 2))
+ ide_acpi_push_timing(hwif);
+
+ ide_acpi_exec_tfs(drive);
+
memset(&rq, 0, sizeof(rq));
memset(&rqpm, 0, sizeof(rqpm));
memset(&args, 0, sizeof(args));
}
#endif /* CONFIG_BLK_DEV_IDEPCI */
+#ifdef CONFIG_BLK_DEV_IDEACPI
+ if (!strcmp(s, "ide=noacpi")) {
+ //printk(" : Disable IDE ACPI support.\n");
+ ide_noacpi = 1;
+ return 1;
+ }
+ if (!strcmp(s, "ide=acpigtf")) {
+ //printk(" : Enable IDE ACPI _GTF support.\n");
+ ide_noacpitfs = 0;
+ return 1;
+ }
+ if (!strcmp(s, "ide=acpionboot")) {
+ //printk(" : Call IDE ACPI methods on boot.\n");
+ ide_noacpionboot = 0;
+ return 1;
+ }
+#endif /* CONFIG_BLK_DEV_IDEACPI */
+
/*
* Look for drive options: "hdx="
*/
obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
+obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
obj-$(CONFIG_BLK_DEV_HPT34X) += hpt34x.o
obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
-#obj-$(CONFIG_BLK_DEV_HPT37X) += hpt37x.o
+obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o
obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o
obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o
obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o
obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o
obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o
obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
+obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o
obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o
obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
--- /dev/null
+/*
+ * linux/drivers/ide/pci/delkin_cb.c
+ *
+ * Created 20 Oct 2004 by Mark Lord
+ *
+ * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
+ *
+ * Modeled after the 16-bit PCMCIA driver: ide-cs.c
+ *
+ * This is slightly peculiar, in that it is a PCI driver,
+ * but is NOT an IDE PCI driver -- the IDE layer does not directly
+ * support hot insertion/removal of PCI interfaces, so this driver
+ * is unable to use the IDE PCI interfaces. Instead, it uses the
+ * same interfaces as the ide-cs (PCMCIA) driver uses.
+ * On the plus side, the driver is also smaller/simpler this way.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+#include <linux/autoconf.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <asm/io.h>
+
+/*
+ * No chip documentation has yet been found,
+ * so these configuration values were pulled from
+ * a running Win98 system using "debug".
+ * This gives around 3MByte/second read performance,
+ * which is about 2/3 of what the chip is capable of.
+ *
+ * There is also a 4KByte mmio region on the card,
+ * but its purpose has yet to be reverse-engineered.
+ */
+static const u8 setup[] = {
+ 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
+ 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
+};
+
+static int __devinit
+delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
+{
+ unsigned long base;
+ hw_regs_t hw;
+ ide_hwif_t *hwif = NULL;
+ ide_drive_t *drive;
+ int i, rc;
+
+ rc = pci_enable_device(dev);
+ if (rc) {
+ printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
+ return rc;
+ }
+ rc = pci_request_regions(dev, "delkin_cb");
+ if (rc) {
+ printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
+ pci_disable_device(dev);
+ return rc;
+ }
+ base = pci_resource_start(dev, 0);
+ outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
+ inb(base + 0x17); /* read status to clear interrupts */
+ for (i = 0; i < sizeof(setup); ++i) {
+ if (setup[i])
+ outb(setup[i], base + i);
+ }
+ pci_release_regions(dev); /* IDE layer handles regions itself */
+
+ memset(&hw, 0, sizeof(hw));
+ ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
+ hw.irq = dev->irq;
+ hw.chipset = ide_pci; /* this enables IRQ sharing */
+
+ rc = ide_register_hw_with_fixup(&hw, &hwif, ide_undecoded_slave);
+ if (rc < 0) {
+ printk(KERN_ERR "delkin_cb: ide_register_hw failed (%d)\n", rc);
+ pci_disable_device(dev);
+ return -ENODEV;
+ }
+ pci_set_drvdata(dev, hwif);
+ hwif->pci_dev = dev;
+ drive = &hwif->drives[0];
+ if (drive->present) {
+ drive->io_32bit = 1;
+ drive->unmask = 1;
+ }
+ return 0;
+}
+
+static void
+delkin_cb_remove (struct pci_dev *dev)
+{
+ ide_hwif_t *hwif = pci_get_drvdata(dev);
+
+ if (hwif)
+ ide_unregister(hwif->index);
+ pci_disable_device(dev);
+}
+
+static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
+ { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "Delkin-ASKA-Workbit Cardbus IDE",
+ .id_table = delkin_cb_pci_tbl,
+ .probe = delkin_cb_probe,
+ .remove = delkin_cb_remove,
+};
+
+static int
+delkin_cb_init (void)
+{
+ return pci_module_init(&driver);
+}
+
+static void
+delkin_cb_exit (void)
+{
+ pci_unregister_driver(&driver);
+}
+
+module_init(delkin_cb_init);
+module_exit(delkin_cb_exit);
+
+MODULE_AUTHOR("Mark Lord");
+MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
+MODULE_LICENSE("GPL");
+
/*
- * linux/drivers/ide/pci/hpt366.c Version 0.36 April 25, 2003
+ * linux/drivers/ide/pci/hpt366.c Version 1.01 Dec 23, 2006
*
* Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
* Portions Copyright (C) 2001 Sun Microsystems, Inc.
* channel caused the cached register value to get out of sync with the
* actual one, the channels weren't serialized, the turnaround shouldn't
* be done on 66 MHz PCI bus
- * - avoid calibrating PLL twice as the second time results in a wrong PCI
- * frequency and thus in the wrong timings for the secondary channel
- * - disable UltraATA/133 for HPT372 by default (50 MHz DPLL clock do not
- * allow for this speed anyway)
- * - add support for HPT302N and HPT371N clocking (the same as for HPT372N)
- * - HPT371/N are single channel chips, so avoid touching the primary channel
- * which exists only virtually (there's no pins for it)
+ * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used
+ * does not allow for this speed anyway
+ * - avoid touching disabled channels (e.g. HPT371/N are single channel chips,
+ * their primary channel is kind of virtual, it isn't tied to any pins)
* - fix/remove bad/unused timing tables and use one set of tables for the whole
* HPT37x chip family; save space by introducing the separate transfer mode
* table in which the mode lookup is done
* and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
* - pass to init_chipset() handlers a copy of the IDE PCI device structure as
* they tamper with its fields
- * <source@mvista.com>
- *
+ * - pass to the init_setup handlers a copy of the ide_pci_device_t structure
+ * since they may tamper with its fields
+ * - prefix the driver startup messages with the real chip name
+ * - claim the extra 240 bytes of I/O space for all chips
+ * - optimize the rate masking/filtering and the drive list lookup code
+ * - use pci_get_slot() to get to the function 1 of HPT36x/374
+ * - cache offset of the channel's misc. control registers (MCRs) being used
+ * throughout the driver
+ * - only touch the relevant MCR when detecting the cable type on HPT374's
+ * function 1
+ * - rename all the register related variables consistently
+ * - move all the interrupt twiddling code from the speedproc handlers into
+ * init_hwif_hpt366(), also grouping all the DMA related code together there
+ * - merge two HPT37x speedproc handlers, fix the PIO timing register mask and
+ * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
+ * when setting an UltraDMA mode
+ * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
+ * the best possible one
+ * - clean up DMA timeout handling for HPT370
+ * - switch to using the enumeration type to differ between the numerous chip
+ * variants, matching PCI device/revision ID with the chip type early, at the
+ * init_setup stage
+ * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
+ * stop duplicating it for each channel by storing the pointer in the pci_dev
+ * structure: first, at the init_setup stage, point it to a static "template"
+ * with only the chip type and its specific base DPLL frequency, the highest
+ * supported DMA mode, and the chip settings table pointer filled, then, at
+ * the init_chipset stage, allocate per-chip instance and fill it with the
+ * rest of the necessary information
+ * - get rid of the constant thresholds in the HPT37x PCI clock detection code,
+ * switch to calculating PCI clock frequency based on the chip's base DPLL
+ * frequency
+ * - switch to using the DPLL clock and enable UltraATA/133 mode by default on
+ * anything newer than HPT370/A
+ * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
+ * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
+ * unify HPT36x/37x timing setup code and the speedproc handlers by joining
+ * the register setting lists into the table indexed by the clock selected
+ * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
*/
-
#include <linux/types.h>
#include <linux/module.h>
#include <linux/kernel.h>
};
#define HPT366_DEBUG_DRIVE_INFO 0
-#define HPT374_ALLOW_ATA133_6 0
-#define HPT371_ALLOW_ATA133_6 0
-#define HPT302_ALLOW_ATA133_6 0
-#define HPT372_ALLOW_ATA133_6 0
-#define HPT370_ALLOW_ATA100_5 1
+#define HPT374_ALLOW_ATA133_6 1
+#define HPT371_ALLOW_ATA133_6 1
+#define HPT302_ALLOW_ATA133_6 1
+#define HPT372_ALLOW_ATA133_6 1
+#define HPT370_ALLOW_ATA100_5 0
#define HPT366_ALLOW_ATA66_4 1
#define HPT366_ALLOW_ATA66_3 1
#define HPT366_MAX_DEVS 8
-#define F_LOW_PCI_33 0x23
-#define F_LOW_PCI_40 0x29
-#define F_LOW_PCI_50 0x2d
-#define F_LOW_PCI_66 0x42
+/* Supported ATA clock frequencies */
+enum ata_clock {
+ ATA_CLOCK_25MHZ,
+ ATA_CLOCK_33MHZ,
+ ATA_CLOCK_40MHZ,
+ ATA_CLOCK_50MHZ,
+ ATA_CLOCK_66MHZ,
+ NUM_ATA_CLOCKS
+};
/*
- * Hold all the highpoint quirks and revision information in one
- * place.
+ * Hold all the HighPoint chip information in one place.
*/
-struct hpt_info
-{
+struct hpt_info {
+ u8 chip_type; /* Chip type */
u8 max_mode; /* Speeds allowed */
- int revision; /* Chipset revision */
- int flags; /* Chipset properties */
-#define PLL_MODE 1
-#define IS_3xxN 2
-#define PCI_66MHZ 4
- /* Speed table */
- u32 *speed;
+ u8 dpll_clk; /* DPLL clock in MHz */
+ u8 pci_clk; /* PCI clock in MHz */
+ u32 **settings; /* Chipset settings table */
};
-/*
- * This wants fixing so that we do everything not by classrev
- * (which breaks on the newest chips) but by creating an
- * enumeration of chip variants and using that
- */
+/* Supported HighPoint chips */
+enum {
+ HPT36x,
+ HPT370,
+ HPT370A,
+ HPT374,
+ HPT372,
+ HPT372A,
+ HPT302,
+ HPT371,
+ HPT372N,
+ HPT302N,
+ HPT371N
+};
+
+static u32 *hpt36x_settings[NUM_ATA_CLOCKS] = {
+ twenty_five_base_hpt36x,
+ thirty_three_base_hpt36x,
+ forty_base_hpt36x,
+ NULL,
+ NULL
+};
+
+static u32 *hpt37x_settings[NUM_ATA_CLOCKS] = {
+ NULL,
+ thirty_three_base_hpt37x,
+ NULL,
+ fifty_base_hpt37x,
+ sixty_six_base_hpt37x
+};
+
+static struct hpt_info hpt36x __devinitdata = {
+ .chip_type = HPT36x,
+ .max_mode = (HPT366_ALLOW_ATA66_4 || HPT366_ALLOW_ATA66_3) ? 2 : 1,
+ .dpll_clk = 0, /* no DPLL */
+ .settings = hpt36x_settings
+};
+
+static struct hpt_info hpt370 __devinitdata = {
+ .chip_type = HPT370,
+ .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
+ .dpll_clk = 48,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt370a __devinitdata = {
+ .chip_type = HPT370A,
+ .max_mode = HPT370_ALLOW_ATA100_5 ? 3 : 2,
+ .dpll_clk = 48,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt374 __devinitdata = {
+ .chip_type = HPT374,
+ .max_mode = HPT374_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 48,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt372 __devinitdata = {
+ .chip_type = HPT372,
+ .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 55,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt372a __devinitdata = {
+ .chip_type = HPT372A,
+ .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 66,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt302 __devinitdata = {
+ .chip_type = HPT302,
+ .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 66,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt371 __devinitdata = {
+ .chip_type = HPT371,
+ .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 66,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt372n __devinitdata = {
+ .chip_type = HPT372N,
+ .max_mode = HPT372_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 77,
+ .settings = hpt37x_settings
+};
+
+static struct hpt_info hpt302n __devinitdata = {
+ .chip_type = HPT302N,
+ .max_mode = HPT302_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 77,
+};
-static __devinit u32 hpt_revision (struct pci_dev *dev)
+static struct hpt_info hpt371n __devinitdata = {
+ .chip_type = HPT371N,
+ .max_mode = HPT371_ALLOW_ATA133_6 ? 4 : 3,
+ .dpll_clk = 77,
+ .settings = hpt37x_settings
+};
+
+static int check_in_drive_list(ide_drive_t *drive, const char **list)
{
- u32 class_rev;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
-
- switch(dev->device) {
- /* Remap new 372N onto 372 */
- case PCI_DEVICE_ID_TTI_HPT372N:
- class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
- case PCI_DEVICE_ID_TTI_HPT374:
- class_rev = PCI_DEVICE_ID_TTI_HPT374; break;
- case PCI_DEVICE_ID_TTI_HPT371:
- class_rev = PCI_DEVICE_ID_TTI_HPT371; break;
- case PCI_DEVICE_ID_TTI_HPT302:
- class_rev = PCI_DEVICE_ID_TTI_HPT302; break;
- case PCI_DEVICE_ID_TTI_HPT372:
- class_rev = PCI_DEVICE_ID_TTI_HPT372; break;
- default:
- break;
- }
- return class_rev;
-}
+ struct hd_driveid *id = drive->id;
-static int check_in_drive_lists(ide_drive_t *drive, const char **list);
+ while (*list)
+ if (!strcmp(*list++,id->model))
+ return 1;
+ return 0;
+}
-static u8 hpt3xx_ratemask (ide_drive_t *drive)
+static u8 hpt3xx_ratemask(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 mode = 0;
-
- /* FIXME: TODO - move this to set info->mode once at boot */
-
- if (info->revision >= 8) { /* HPT374 */
- mode = (HPT374_ALLOW_ATA133_6) ? 4 : 3;
- } else if (info->revision >= 7) { /* HPT371 */
- mode = (HPT371_ALLOW_ATA133_6) ? 4 : 3;
- } else if (info->revision >= 6) { /* HPT302 */
- mode = (HPT302_ALLOW_ATA133_6) ? 4 : 3;
- } else if (info->revision >= 5) { /* HPT372 */
- mode = (HPT372_ALLOW_ATA133_6) ? 4 : 3;
- } else if (info->revision >= 4) { /* HPT370A */
- mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
- } else if (info->revision >= 3) { /* HPT370 */
- mode = (HPT370_ALLOW_ATA100_5) ? 3 : 2;
- mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : mode;
- } else { /* HPT366 and HPT368 */
- mode = (check_in_drive_lists(drive, bad_ata33)) ? 0 : 2;
- }
+ struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
+ u8 mode = info->max_mode;
+
if (!eighty_ninty_three(drive) && mode)
mode = min(mode, (u8)1);
return mode;
* either PIO or UDMA modes 0,4,5
*/
-static u8 hpt3xx_ratefilter (ide_drive_t *drive, u8 speed)
+static u8 hpt3xx_ratefilter(ide_drive_t *drive, u8 speed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
+ struct hpt_info *info = pci_get_drvdata(HWIF(drive)->pci_dev);
+ u8 chip_type = info->chip_type;
u8 mode = hpt3xx_ratemask(drive);
if (drive->media != ide_disk)
return min(speed, (u8)XFER_PIO_4);
- switch(mode) {
+ switch (mode) {
case 0x04:
- speed = min(speed, (u8)XFER_UDMA_6);
+ speed = min_t(u8, speed, XFER_UDMA_6);
break;
case 0x03:
- speed = min(speed, (u8)XFER_UDMA_5);
- if (info->revision >= 5)
+ speed = min_t(u8, speed, XFER_UDMA_5);
+ if (chip_type >= HPT374)
break;
- if (check_in_drive_lists(drive, bad_ata100_5))
- speed = min(speed, (u8)XFER_UDMA_4);
- break;
+ if (!check_in_drive_list(drive, bad_ata100_5))
+ goto check_bad_ata33;
+ /* fall thru */
case 0x02:
- speed = min(speed, (u8)XFER_UDMA_4);
- /*
- * CHECK ME, Does this need to be set to 5 ??
- */
- if (info->revision >= 3)
- break;
- if ((check_in_drive_lists(drive, bad_ata66_4)) ||
- (!(HPT366_ALLOW_ATA66_4)))
- speed = min(speed, (u8)XFER_UDMA_3);
- if ((check_in_drive_lists(drive, bad_ata66_3)) ||
- (!(HPT366_ALLOW_ATA66_3)))
- speed = min(speed, (u8)XFER_UDMA_2);
- break;
+ speed = min_t(u8, speed, XFER_UDMA_4);
+
+ /*
+ * CHECK ME, Does this need to be changed to HPT374 ??
+ */
+ if (chip_type >= HPT370)
+ goto check_bad_ata33;
+ if (HPT366_ALLOW_ATA66_4 &&
+ !check_in_drive_list(drive, bad_ata66_4))
+ goto check_bad_ata33;
+
+ speed = min_t(u8, speed, XFER_UDMA_3);
+ if (HPT366_ALLOW_ATA66_3 &&
+ !check_in_drive_list(drive, bad_ata66_3))
+ goto check_bad_ata33;
+ /* fall thru */
case 0x01:
- speed = min(speed, (u8)XFER_UDMA_2);
- /*
- * CHECK ME, Does this need to be set to 5 ??
- */
- if (info->revision >= 3)
+ speed = min_t(u8, speed, XFER_UDMA_2);
+
+ check_bad_ata33:
+ if (chip_type >= HPT370A)
break;
- if (check_in_drive_lists(drive, bad_ata33))
- speed = min(speed, (u8)XFER_MW_DMA_2);
- break;
+ if (!check_in_drive_list(drive, bad_ata33))
+ break;
+ /* fall thru */
case 0x00:
default:
- speed = min(speed, (u8)XFER_MW_DMA_2);
+ speed = min_t(u8, speed, XFER_MW_DMA_2);
break;
}
return speed;
}
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
- struct hd_driveid *id = drive->id;
-
- if (quirk_drives == list) {
- while (*list)
- if (strstr(id->model, *list++))
- return 1;
- } else {
- while (*list)
- if (!strcmp(*list++,id->model))
- return 1;
- }
- return 0;
-}
-
-static u32 pci_bus_clock_list(u8 speed, u32 *chipset_table)
+static u32 get_speed_setting(u8 speed, struct hpt_info *info)
{
int i;
for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
if (xfer_speeds[i] == speed)
break;
- return chipset_table[i];
+ /*
+ * NOTE: info->settings only points to the pointer
+ * to the list of the actual register values
+ */
+ return (*info->settings)[i];
}
static int hpt36x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regtime = (drive->select.b.unit & 0x01) ? 0x44 : 0x40;
- u8 regfast = (hwif->channel) ? 0x55 : 0x51;
- u8 drive_fast = 0;
- u32 reg1 = 0, reg2 = 0;
-
- /*
- * Disable the "fast interrupt" prediction.
- */
- pci_read_config_byte(dev, regfast, &drive_fast);
- if (drive_fast & 0x80)
- pci_write_config_byte(dev, regfast, drive_fast & ~0x80);
-
- reg2 = pci_bus_clock_list(speed, info->speed);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = pci_get_drvdata(dev);
+ u8 speed = hpt3xx_ratefilter(drive, xferspeed);
+ u8 itr_addr = drive->dn ? 0x44 : 0x40;
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x30070000 :
+ (speed < XFER_UDMA_0 ? 0xc0070000 : 0xc03800ff);
+ u32 new_itr = get_speed_setting(speed, info);
+ u32 old_itr = 0;
/*
- * Disable on-chip PIO FIFO/buffer
- * (to avoid problems handling I/O errors later)
+ * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
+ * to avoid problems handling I/O errors later
*/
- pci_read_config_dword(dev, regtime, ®1);
- if (speed >= XFER_MW_DMA_0) {
- reg2 = (reg2 & ~0xc0000000) | (reg1 & 0xc0000000);
- } else {
- reg2 = (reg2 & ~0x30070000) | (reg1 & 0x30070000);
- }
- reg2 &= ~0x80000000;
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
+ new_itr &= ~0xc0000000;
- pci_write_config_dword(dev, regtime, reg2);
+ pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
-static int hpt370_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static int hpt37x_tune_chipset(ide_drive_t *drive, u8 xferspeed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
- u8 drive_pci = 0x40 + (drive->dn * 4);
- u8 new_fast = 0, drive_fast = 0;
- u32 list_conf = 0, drive_conf = 0;
- u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
-
- /*
- * Disable the "fast interrupt" prediction.
- * don't holdoff on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, regfast, &drive_fast);
- new_fast = drive_fast;
- if (new_fast & 0x02)
- new_fast &= ~0x02;
-
-#ifdef HPT_DELAY_INTERRUPT
- if (new_fast & 0x01)
- new_fast &= ~0x01;
-#else
- if ((new_fast & 0x01) == 0)
- new_fast |= 0x01;
-#endif
- if (new_fast != drive_fast)
- pci_write_config_byte(dev, regfast, new_fast);
-
- list_conf = pci_bus_clock_list(speed, info->speed);
-
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = pci_get_drvdata(dev);
+ u8 speed = hpt3xx_ratefilter(drive, xferspeed);
+ u8 itr_addr = 0x40 + (drive->dn * 4);
+ u32 itr_mask = speed < XFER_MW_DMA_0 ? 0x303c0000 :
+ (speed < XFER_UDMA_0 ? 0xc03c0000 : 0xc1c001ff);
+ u32 new_itr = get_speed_setting(speed, info);
+ u32 old_itr = 0;
+
+ pci_read_config_dword(dev, itr_addr, &old_itr);
+ new_itr = (new_itr & ~itr_mask) | (old_itr & itr_mask);
if (speed < XFER_MW_DMA_0)
- list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, drive_pci, list_conf);
+ new_itr &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
+ pci_write_config_dword(dev, itr_addr, new_itr);
return ide_config_drive_speed(drive, speed);
}
-static int hpt372_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+static int hpt3xx_tune_chipset(ide_drive_t *drive, u8 speed)
{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 speed = hpt3xx_ratefilter(drive, xferspeed);
- u8 regfast = (drive->hwif->channel) ? 0x55 : 0x51;
- u8 drive_fast = 0, drive_pci = 0x40 + (drive->dn * 4);
- u32 list_conf = 0, drive_conf = 0;
- u32 conf_mask = (speed >= XFER_MW_DMA_0) ? 0xc0000000 : 0x30070000;
-
- /*
- * Disable the "fast interrupt" prediction.
- * don't holdoff on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, regfast, &drive_fast);
- drive_fast &= ~0x07;
- pci_write_config_byte(dev, regfast, drive_fast);
-
- list_conf = pci_bus_clock_list(speed, info->speed);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- list_conf = (list_conf & ~conf_mask) | (drive_conf & conf_mask);
- if (speed < XFER_MW_DMA_0)
- list_conf &= ~0x80000000; /* Disable on-chip PIO FIFO/buffer */
- pci_write_config_dword(dev, drive_pci, list_conf);
-
- return ide_config_drive_speed(drive, speed);
-}
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hpt_info *info = pci_get_drvdata(hwif->pci_dev);
-static int hpt3xx_tune_chipset (ide_drive_t *drive, u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
-
- if (info->revision >= 8)
- return hpt372_tune_chipset(drive, speed); /* not a typo */
- else if (info->revision >= 5)
- return hpt372_tune_chipset(drive, speed);
- else if (info->revision >= 3)
- return hpt370_tune_chipset(drive, speed);
+ if (info->chip_type >= HPT370)
+ return hpt37x_tune_chipset(drive, speed);
else /* hpt368: hpt_minimum_revision(dev, 2) */
return hpt36x_tune_chipset(drive, speed);
}
-static void hpt3xx_tune_drive (ide_drive_t *drive, u8 pio)
+static void hpt3xx_tune_drive(ide_drive_t *drive, u8 pio)
{
- pio = ide_get_best_pio_mode(drive, 255, pio, NULL);
- (void) hpt3xx_tune_chipset(drive, (XFER_PIO_0 + pio));
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void) hpt3xx_tune_chipset (drive, XFER_PIO_0 + pio);
}
/*
* This allows the configuration of ide_pci chipset registers
* for cards that learn about the drive's UDMA, DMA, PIO capabilities
- * after the drive is reported by the OS. Initially for designed for
+ * after the drive is reported by the OS. Initially designed for
* HPT366 UDMA chipset by HighPoint|Triones Technologies, Inc.
*
- * check_in_drive_lists(drive, bad_ata66_4)
- * check_in_drive_lists(drive, bad_ata66_3)
- * check_in_drive_lists(drive, bad_ata33)
- *
*/
-static int config_chipset_for_dma (ide_drive_t *drive)
+static int config_chipset_for_dma(ide_drive_t *drive)
{
u8 speed = ide_dma_speed(drive, hpt3xx_ratemask(drive));
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
if (!speed)
return 0;
- /* If we don't have any timings we can't do a lot */
- if (info->speed == NULL)
- return 0;
-
(void) hpt3xx_tune_chipset(drive, speed);
return ide_dma_enable(drive);
}
-static int hpt3xx_quirkproc (ide_drive_t *drive)
+static int hpt3xx_quirkproc(ide_drive_t *drive)
{
- return ((int) check_in_drive_lists(drive, quirk_drives));
+ struct hd_driveid *id = drive->id;
+ const char **list = quirk_drives;
+
+ while (*list)
+ if (strstr(id->model, *list++))
+ return 1;
+ return 0;
}
-static void hpt3xx_intrproc (ide_drive_t *drive)
+static void hpt3xx_intrproc(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = HWIF(drive);
if (drive->quirk_list)
return;
/* drives in the quirk_list may not like intr setups/cleanups */
- hwif->OUTB(drive->ctl|2, IDE_CONTROL_REG);
+ hwif->OUTB(drive->ctl | 2, IDE_CONTROL_REG);
}
-static void hpt3xx_maskproc (ide_drive_t *drive, int mask)
+static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
{
- ide_hwif_t *hwif = drive->hwif;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- struct pci_dev *dev = hwif->pci_dev;
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = pci_get_drvdata(dev);
if (drive->quirk_list) {
- if (info->revision >= 3) {
- u8 reg5a = 0;
- pci_read_config_byte(dev, 0x5a, ®5a);
- if (((reg5a & 0x10) >> 4) != mask)
- pci_write_config_byte(dev, 0x5a, mask ? (reg5a | 0x10) : (reg5a & ~0x10));
+ if (info->chip_type >= HPT370) {
+ u8 scr1 = 0;
+
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ if (((scr1 & 0x10) >> 4) != mask) {
+ if (mask)
+ scr1 |= 0x10;
+ else
+ scr1 &= ~0x10;
+ pci_write_config_byte(dev, 0x5a, scr1);
+ }
} else {
- if (mask) {
+ if (mask)
disable_irq(hwif->irq);
- } else {
- enable_irq(hwif->irq);
- }
+ else
+ enable_irq (hwif->irq);
}
- } else {
- if (IDE_CONTROL_REG)
- hwif->OUTB(mask ? (drive->ctl | 2) :
- (drive->ctl & ~2),
- IDE_CONTROL_REG);
- }
+ } else
+ hwif->OUTB(mask ? (drive->ctl | 2) : (drive->ctl & ~2),
+ IDE_CONTROL_REG);
}
-static int hpt366_config_drive_xfer_rate (ide_drive_t *drive)
+static int hpt366_config_drive_xfer_rate(ide_drive_t *drive)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = HWIF(drive);
struct hd_driveid *id = drive->id;
drive->init_speed = 0;
if ((id->capability & 1) && drive->autodma) {
-
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
goto fast_ata_pio;
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
- hpt3xx_tune_drive(drive, 5);
+ hpt3xx_tune_drive(drive, 255);
return hwif->ide_dma_off_quietly(drive);
}
/* IORDY not supported */
}
/*
- * This is specific to the HPT366 UDMA bios chipset
+ * This is specific to the HPT366 UDMA chipset
* by HighPoint|Triones Technologies, Inc.
*/
-static int hpt366_ide_dma_lostirq (ide_drive_t *drive)
+static int hpt366_ide_dma_lostirq(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
- u8 reg50h = 0, reg52h = 0, reg5ah = 0;
-
- pci_read_config_byte(dev, 0x50, ®50h);
- pci_read_config_byte(dev, 0x52, ®52h);
- pci_read_config_byte(dev, 0x5a, ®5ah);
- printk("%s: (%s) reg50h=0x%02x, reg52h=0x%02x, reg5ah=0x%02x\n",
- drive->name, __FUNCTION__, reg50h, reg52h, reg5ah);
- if (reg5ah & 0x10)
- pci_write_config_byte(dev, 0x5a, reg5ah & ~0x10);
+ struct pci_dev *dev = HWIF(drive)->pci_dev;
+ u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
+
+ pci_read_config_byte(dev, 0x50, &mcr1);
+ pci_read_config_byte(dev, 0x52, &mcr3);
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
+ drive->name, __FUNCTION__, mcr1, mcr3, scr1);
+ if (scr1 & 0x10)
+ pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
return __ide_dma_lostirq(drive);
}
-static void hpt370_clear_engine (ide_drive_t *drive)
+static void hpt370_clear_engine(ide_drive_t *drive)
{
- u8 regstate = HWIF(drive)->channel ? 0x54 : 0x50;
- pci_write_config_byte(HWIF(drive)->pci_dev, regstate, 0x37);
+ ide_hwif_t *hwif = HWIF(drive);
+
+ pci_write_config_byte(hwif->pci_dev, hwif->select_data, 0x37);
udelay(10);
}
+static void hpt370_irq_timeout(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ u16 bfifo = 0;
+ u8 dma_cmd;
+
+ pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
+ printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
+
+ /* get DMA command mode */
+ dma_cmd = hwif->INB(hwif->dma_command);
+ /* stop DMA */
+ hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command);
+ hpt370_clear_engine(drive);
+}
+
static void hpt370_ide_dma_start(ide_drive_t *drive)
{
#ifdef HPT_RESET_STATE_ENGINE
ide_dma_start(drive);
}
-static int hpt370_ide_dma_end (ide_drive_t *drive)
+static int hpt370_ide_dma_end(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = hwif->INB(hwif->dma_status);
+ u8 dma_stat = hwif->INB(hwif->dma_status);
if (dma_stat & 0x01) {
/* wait a little */
udelay(20);
dma_stat = hwif->INB(hwif->dma_status);
+ if (dma_stat & 0x01)
+ hpt370_irq_timeout(drive);
}
- if ((dma_stat & 0x01) != 0)
- /* fallthrough */
- (void) HWIF(drive)->ide_dma_timeout(drive);
-
return __ide_dma_end(drive);
}
-static void hpt370_lostirq_timeout (ide_drive_t *drive)
+static int hpt370_ide_dma_timeout(ide_drive_t *drive)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 bfifo = 0, reginfo = hwif->channel ? 0x56 : 0x52;
- u8 dma_stat = 0, dma_cmd = 0;
-
- pci_read_config_byte(HWIF(drive)->pci_dev, reginfo, &bfifo);
- printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo);
- hpt370_clear_engine(drive);
- /* get dma command mode */
- dma_cmd = hwif->INB(hwif->dma_command);
- /* stop dma */
- hwif->OUTB(dma_cmd & ~0x1, hwif->dma_command);
- dma_stat = hwif->INB(hwif->dma_status);
- /* clear errors */
- hwif->OUTB(dma_stat | 0x6, hwif->dma_status);
-}
-
-static int hpt370_ide_dma_timeout (ide_drive_t *drive)
-{
- hpt370_lostirq_timeout(drive);
- hpt370_clear_engine(drive);
+ hpt370_irq_timeout(drive);
return __ide_dma_timeout(drive);
}
-static int hpt370_ide_dma_lostirq (ide_drive_t *drive)
-{
- hpt370_lostirq_timeout(drive);
- hpt370_clear_engine(drive);
- return __ide_dma_lostirq(drive);
-}
-
/* returns 1 if DMA IRQ issued, 0 otherwise */
static int hpt374_ide_dma_test_irq(ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
u16 bfifo = 0;
- u8 reginfo = hwif->channel ? 0x56 : 0x52;
- u8 dma_stat;
+ u8 dma_stat;
- pci_read_config_word(hwif->pci_dev, reginfo, &bfifo);
+ pci_read_config_word(hwif->pci_dev, hwif->select_data + 2, &bfifo);
if (bfifo & 0x1FF) {
// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
return 0;
dma_stat = hwif->INB(hwif->dma_status);
/* return 1 if INTR asserted */
- if ((dma_stat & 4) == 4)
+ if (dma_stat & 4)
return 1;
if (!drive->waiting_for_dma)
return 0;
}
-static int hpt374_ide_dma_end (ide_drive_t *drive)
+static int hpt374_ide_dma_end(ide_drive_t *drive)
{
- struct pci_dev *dev = HWIF(drive)->pci_dev;
ide_hwif_t *hwif = HWIF(drive);
- u8 msc_stat = 0, mscreg = hwif->channel ? 0x54 : 0x50;
- u8 bwsr_stat = 0, bwsr_mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x6a, &bwsr_stat);
- pci_read_config_byte(dev, mscreg, &msc_stat);
- if ((bwsr_stat & bwsr_mask) == bwsr_mask)
- pci_write_config_byte(dev, mscreg, msc_stat|0x30);
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 mcr = 0, mcr_addr = hwif->select_data;
+ u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
+
+ pci_read_config_byte(dev, 0x6a, &bwsr);
+ pci_read_config_byte(dev, mcr_addr, &mcr);
+ if (bwsr & mask)
+ pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
return __ide_dma_end(drive);
}
* @mode: clocking mode (0x21 for write, 0x23 otherwise)
*
* Switch the DPLL clock on the HPT3xxN devices. This is a right mess.
- * NOTE: avoid touching the disabled primary channel on HPT371N -- it
- * doesn't physically exist anyway...
*/
static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
{
- u8 mcr1, scr2 = hwif->INB(hwif->dma_master + 0x7b);
+ u8 scr2 = hwif->INB(hwif->dma_master + 0x7b);
if ((scr2 & 0x7f) == mode)
return;
- /* MISC. control register 1 has the channel enable bit... */
- mcr1 = hwif->INB(hwif->dma_master + 0x70);
-
/* Tristate the bus */
- if (mcr1 & 0x04)
- hwif->OUTB(0x80, hwif->dma_master + 0x73);
+ hwif->OUTB(0x80, hwif->dma_master + 0x73);
hwif->OUTB(0x80, hwif->dma_master + 0x77);
/* Switch clock and reset channels */
hwif->OUTB(mode, hwif->dma_master + 0x7b);
hwif->OUTB(0xc0, hwif->dma_master + 0x79);
- /* Reset state machines */
- if (mcr1 & 0x04)
- hwif->OUTB(0x37, hwif->dma_master + 0x70);
- hwif->OUTB(0x37, hwif->dma_master + 0x74);
+ /*
+ * Reset the state machines.
+ * NOTE: avoid accidentally enabling the disabled channels.
+ */
+ hwif->OUTB(hwif->INB(hwif->dma_master + 0x70) | 0x32,
+ hwif->dma_master + 0x70);
+ hwif->OUTB(hwif->INB(hwif->dma_master + 0x74) | 0x32,
+ hwif->dma_master + 0x74);
/* Complete reset */
hwif->OUTB(0x00, hwif->dma_master + 0x79);
/* Reconnect channels to bus */
- if (mcr1 & 0x04)
- hwif->OUTB(0x00, hwif->dma_master + 0x73);
+ hwif->OUTB(0x00, hwif->dma_master + 0x73);
hwif->OUTB(0x00, hwif->dma_master + 0x77);
}
static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
{
- ide_hwif_t *hwif = HWIF(drive);
- u8 wantclock = rq_data_dir(rq) ? 0x23 : 0x21;
-
- hpt3xxn_set_clock(hwif, wantclock);
+ hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21);
}
/*
* Set/get power state for a drive.
+ * NOTE: affects both drives on each channel.
*
* When we turn the power back on, we need to re-initialize things.
*/
static int hpt3xx_busproc(ide_drive_t *drive, int state)
{
- ide_hwif_t *hwif = drive->hwif;
+ ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- u8 tristate, resetmask, bus_reg = 0;
- u16 tri_reg = 0;
+ u8 mcr_addr = hwif->select_data + 2;
+ u8 resetmask = hwif->channel ? 0x80 : 0x40;
+ u8 bsr2 = 0;
+ u16 mcr = 0;
hwif->bus_state = state;
- if (hwif->channel) {
- /* secondary channel */
- tristate = 0x56;
- resetmask = 0x80;
- } else {
- /* primary channel */
- tristate = 0x52;
- resetmask = 0x40;
- }
-
/* Grab the status. */
- pci_read_config_word(dev, tristate, &tri_reg);
- pci_read_config_byte(dev, 0x59, &bus_reg);
+ pci_read_config_word(dev, mcr_addr, &mcr);
+ pci_read_config_byte(dev, 0x59, &bsr2);
/*
* Set the state. We don't set it if we don't need to do so.
*/
switch (state) {
case BUSSTATE_ON:
- if (!(bus_reg & resetmask))
+ if (!(bsr2 & resetmask))
return 0;
hwif->drives[0].failures = hwif->drives[1].failures = 0;
- pci_write_config_byte(dev, 0x59, bus_reg & ~resetmask);
- pci_write_config_word(dev, tristate, tri_reg & ~TRISTATE_BIT);
+ pci_write_config_byte(dev, 0x59, bsr2 & ~resetmask);
+ pci_write_config_word(dev, mcr_addr, mcr & ~TRISTATE_BIT);
return 0;
case BUSSTATE_OFF:
- if ((bus_reg & resetmask) && !(tri_reg & TRISTATE_BIT))
+ if ((bsr2 & resetmask) && !(mcr & TRISTATE_BIT))
return 0;
- tri_reg &= ~TRISTATE_BIT;
+ mcr &= ~TRISTATE_BIT;
break;
case BUSSTATE_TRISTATE:
- if ((bus_reg & resetmask) && (tri_reg & TRISTATE_BIT))
+ if ((bsr2 & resetmask) && (mcr & TRISTATE_BIT))
return 0;
- tri_reg |= TRISTATE_BIT;
+ mcr |= TRISTATE_BIT;
break;
default:
return -EINVAL;
hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
- pci_write_config_word(dev, tristate, tri_reg);
- pci_write_config_byte(dev, 0x59, bus_reg | resetmask);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ pci_write_config_byte(dev, 0x59, bsr2 | resetmask);
return 0;
}
-static void __devinit hpt366_clocking(ide_hwif_t *hwif)
+/**
+ * hpt37x_calibrate_dpll - calibrate the DPLL
+ * @dev: PCI device
+ *
+ * Perform a calibration cycle on the DPLL.
+ * Returns 1 if this succeeds
+ */
+static int __devinit hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
{
- u32 reg1 = 0;
- struct hpt_info *info = ide_get_hwifdata(hwif);
+ u32 dpll = (f_high << 16) | f_low | 0x100;
+ u8 scr2;
+ int i;
- pci_read_config_dword(hwif->pci_dev, 0x40, ®1);
+ pci_write_config_dword(dev, 0x5c, dpll);
- /* detect bus speed by looking at control reg timing: */
- switch((reg1 >> 8) & 7) {
- case 5:
- info->speed = forty_base_hpt36x;
- break;
- case 9:
- info->speed = twenty_five_base_hpt36x;
- break;
- case 7:
- default:
- info->speed = thirty_three_base_hpt36x;
+ /* Wait for oscillator ready */
+ for(i = 0; i < 0x5000; ++i) {
+ udelay(50);
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ if (scr2 & 0x80)
break;
}
+ /* See if it stays ready (we'll just bail out if it's not yet) */
+ for(i = 0; i < 0x1000; ++i) {
+ pci_read_config_byte(dev, 0x5b, &scr2);
+ /* DPLL destabilized? */
+ if(!(scr2 & 0x80))
+ return 0;
+ }
+ /* Turn off tuning, we have the DPLL set */
+ pci_read_config_dword (dev, 0x5c, &dpll);
+ pci_write_config_dword(dev, 0x5c, (dpll & ~0x100));
+ return 1;
}
-static void __devinit hpt37x_clocking(ide_hwif_t *hwif)
+static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
{
- struct hpt_info *info = ide_get_hwifdata(hwif);
- struct pci_dev *dev = hwif->pci_dev;
- int adjust, i;
- u16 freq = 0;
- u32 pll, temp = 0;
- u8 reg5bh = 0, mcr1 = 0;
-
+ struct hpt_info *info = kmalloc(sizeof(struct hpt_info), GFP_KERNEL);
+ unsigned long io_base = pci_resource_start(dev, 4);
+ u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
+ enum ata_clock clock;
+
+ if (info == NULL) {
+ printk(KERN_ERR "%s: out of memory!\n", name);
+ return -ENOMEM;
+ }
+
/*
- * default to pci clock. make sure MA15/16 are set to output
- * to prevent drives having problems with 40-pin cables. Needed
- * for some drives such as IBM-DTLA which will not enter ready
- * state on reset when PDIAG is a input.
- *
- * ToDo: should we set 0x21 when using PLL mode ?
+ * Copy everything from a static "template" structure
+ * to just allocated per-chip hpt_info structure.
*/
- pci_write_config_byte(dev, 0x5b, 0x23);
+ *info = *(struct hpt_info *)pci_get_drvdata(dev);
/*
- * We'll have to read f_CNT value in order to determine
- * the PCI clock frequency according to the following ratio:
- *
- * f_CNT = Fpci * 192 / Fdpll
- *
- * First try reading the register in which the HighPoint BIOS
- * saves f_CNT value before reprogramming the DPLL from its
- * default setting (which differs for the various chips).
- * NOTE: This register is only accessible via I/O space.
- *
- * In case the signature check fails, we'll have to resort to
- * reading the f_CNT register itself in hopes that nobody has
- * touched the DPLL yet...
+ * FIXME: Not portable. Also, why do we enable the ROM in the first place?
+ * We don't seem to be using it.
*/
- temp = inl(pci_resource_start(dev, 4) + 0x90);
- if ((temp & 0xFFFFF000) != 0xABCDE000) {
- printk(KERN_WARNING "HPT37X: no clock data saved by BIOS\n");
-
- /* Calculate the average value of f_CNT */
- for (temp = i = 0; i < 128; i++) {
- pci_read_config_word(dev, 0x78, &freq);
- temp += freq & 0x1ff;
- mdelay(1);
- }
- freq = temp / 128;
- } else
- freq = temp & 0x1ff;
+ if (dev->resource[PCI_ROM_RESOURCE].start)
+ pci_write_config_dword(dev, PCI_ROM_ADDRESS,
+ dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
+
+ pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
+ pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
+ pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
+ pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
/*
- * HPT3xxN chips use different PCI clock information.
- * Currently we always set up the PLL for them.
+ * First, try to estimate the PCI clock frequency...
*/
+ if (info->chip_type >= HPT370) {
+ u8 scr1 = 0;
+ u16 f_cnt = 0;
+ u32 temp = 0;
- if (info->flags & IS_3xxN) {
- if(freq < 0x55)
- pll = F_LOW_PCI_33;
- else if(freq < 0x70)
- pll = F_LOW_PCI_40;
- else if(freq < 0x7F)
- pll = F_LOW_PCI_50;
- else
- pll = F_LOW_PCI_66;
+ /* Interrupt force enable. */
+ pci_read_config_byte(dev, 0x5a, &scr1);
+ if (scr1 & 0x10)
+ pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
- printk(KERN_INFO "HPT3xxN detected, FREQ: %d, PLL: %d\n", freq, pll);
- }
- else
- {
- if(freq < 0x9C)
- pll = F_LOW_PCI_33;
- else if(freq < 0xb0)
- pll = F_LOW_PCI_40;
- else if(freq <0xc8)
- pll = F_LOW_PCI_50;
+ /*
+ * HighPoint does this for HPT372A.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (info->chip_type == HPT372A)
+ outb(0x0e, io_base + 0x9c);
+
+ /*
+ * Default to PCI clock. Make sure MA15/16 are set to output
+ * to prevent drives having problems with 40-pin cables.
+ */
+ pci_write_config_byte(dev, 0x5b, 0x23);
+
+ /*
+ * We'll have to read f_CNT value in order to determine
+ * the PCI clock frequency according to the following ratio:
+ *
+ * f_CNT = Fpci * 192 / Fdpll
+ *
+ * First try reading the register in which the HighPoint BIOS
+ * saves f_CNT value before reprogramming the DPLL from its
+ * default setting (which differs for the various chips).
+ * NOTE: This register is only accessible via I/O space.
+ *
+ * In case the signature check fails, we'll have to resort to
+ * reading the f_CNT register itself in hopes that nobody has
+ * touched the DPLL yet...
+ */
+ temp = inl(io_base + 0x90);
+ if ((temp & 0xFFFFF000) != 0xABCDE000) {
+ int i;
+
+ printk(KERN_WARNING "%s: no clock data saved by BIOS\n",
+ name);
+
+ /* Calculate the average value of f_CNT. */
+ for (temp = i = 0; i < 128; i++) {
+ pci_read_config_word(dev, 0x78, &f_cnt);
+ temp += f_cnt & 0x1ff;
+ mdelay(1);
+ }
+ f_cnt = temp / 128;
+ } else
+ f_cnt = temp & 0x1ff;
+
+ dpll_clk = info->dpll_clk;
+ pci_clk = (f_cnt * dpll_clk) / 192;
+
+ /* Clamp PCI clock to bands. */
+ if (pci_clk < 40)
+ pci_clk = 33;
+ else if(pci_clk < 45)
+ pci_clk = 40;
+ else if(pci_clk < 55)
+ pci_clk = 50;
else
- pll = F_LOW_PCI_66;
-
- if (pll == F_LOW_PCI_33) {
- info->speed = thirty_three_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 33MHz PCI clock\n");
- } else if (pll == F_LOW_PCI_40) {
- /* Unsupported */
- } else if (pll == F_LOW_PCI_50) {
- info->speed = fifty_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 50MHz PCI clock\n");
- } else {
- info->speed = sixty_six_base_hpt37x;
- printk(KERN_DEBUG "HPT37X: using 66MHz PCI clock\n");
+ pci_clk = 66;
+
+ printk(KERN_INFO "%s: DPLL base: %d MHz, f_CNT: %d, "
+ "assuming %d MHz PCI\n", name, dpll_clk, f_cnt, pci_clk);
+ } else {
+ u32 itr1 = 0;
+
+ pci_read_config_dword(dev, 0x40, &itr1);
+
+ /* Detect PCI clock by looking at cmd_high_time. */
+ switch((itr1 >> 8) & 0x07) {
+ case 0x09:
+ pci_clk = 40;
+ break;
+ case 0x05:
+ pci_clk = 25;
+ break;
+ case 0x07:
+ default:
+ pci_clk = 33;
+ break;
}
}
- if (pll == F_LOW_PCI_66)
- info->flags |= PCI_66MHZ;
+ /* Let's assume we'll use PCI clock for the ATA clock... */
+ switch (pci_clk) {
+ case 25:
+ clock = ATA_CLOCK_25MHZ;
+ break;
+ case 33:
+ default:
+ clock = ATA_CLOCK_33MHZ;
+ break;
+ case 40:
+ clock = ATA_CLOCK_40MHZ;
+ break;
+ case 50:
+ clock = ATA_CLOCK_50MHZ;
+ break;
+ case 66:
+ clock = ATA_CLOCK_66MHZ;
+ break;
+ }
/*
- * only try the pll if we don't have a table for the clock
- * speed that we're running at. NOTE: the internal PLL will
- * result in slow reads when using a 33MHz PCI clock. we also
- * don't like to use the PLL because it will cause glitches
- * on PRST/SRST when the HPT state engine gets reset.
+ * Only try the DPLL if we don't have a table for the PCI clock that
+ * we are running at for HPT370/A, always use it for anything newer...
*
- * ToDo: Use 66MHz PLL when ATA133 devices are present on a
- * 372 device so we can get ATA133 support
+ * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI.
+ * We also don't like using the DPLL because this causes glitches
+ * on PRST-/SRST- when the state engine gets reset...
*/
- if (info->speed)
- goto init_hpt37X_done;
+ if (info->chip_type >= HPT374 || info->settings[clock] == NULL) {
+ u16 f_low, delta = pci_clk < 50 ? 2 : 4;
+ int adjust;
+
+ /*
+ * Select 66 MHz DPLL clock only if UltraATA/133 mode is
+ * supported/enabled, use 50 MHz DPLL clock otherwise...
+ */
+ if (info->max_mode == 0x04) {
+ dpll_clk = 66;
+ clock = ATA_CLOCK_66MHZ;
+ } else if (dpll_clk) { /* HPT36x chips don't have DPLL */
+ dpll_clk = 50;
+ clock = ATA_CLOCK_50MHZ;
+ }
- info->flags |= PLL_MODE;
-
- /*
- * Adjust the PLL based upon the PCI clock, enable it, and
- * wait for stabilization...
- */
- adjust = 0;
- freq = (pll < F_LOW_PCI_50) ? 2 : 4;
- while (adjust++ < 6) {
- pci_write_config_dword(dev, 0x5c, (freq + pll) << 16 |
- pll | 0x100);
-
- /* wait for clock stabilization */
- for (i = 0; i < 0x50000; i++) {
- pci_read_config_byte(dev, 0x5b, ®5bh);
- if (reg5bh & 0x80) {
- /* spin looking for the clock to destabilize */
- for (i = 0; i < 0x1000; ++i) {
- pci_read_config_byte(dev, 0x5b,
- ®5bh);
- if ((reg5bh & 0x80) == 0)
- goto pll_recal;
- }
- pci_read_config_dword(dev, 0x5c, &pll);
- pci_write_config_dword(dev, 0x5c,
- pll & ~0x100);
- pci_write_config_byte(dev, 0x5b, 0x21);
-
- info->speed = fifty_base_hpt37x;
- printk("HPT37X: using 50MHz internal PLL\n");
- goto init_hpt37X_done;
- }
+ if (info->settings[clock] == NULL) {
+ printk(KERN_ERR "%s: unknown bus timing!\n", name);
+ kfree(info);
+ return -EIO;
}
-pll_recal:
- if (adjust & 1)
- pll -= (adjust >> 1);
- else
- pll += (adjust >> 1);
- }
-init_hpt37X_done:
- if (!info->speed)
- printk(KERN_ERR "HPT37x%s: unknown bus timing [%d %d].\n",
- (info->flags & IS_3xxN) ? "N" : "", pll, freq);
- /*
- * Reset the state engines.
- * NOTE: avoid accidentally enabling the primary channel on HPT371N.
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- if (mcr1 & 0x04)
- pci_write_config_byte(dev, 0x50, 0x37);
- pci_write_config_byte(dev, 0x54, 0x37);
- udelay(100);
-}
+ /* Select the DPLL clock. */
+ pci_write_config_byte(dev, 0x5b, 0x21);
-static int __devinit init_hpt37x(struct pci_dev *dev)
-{
- u8 reg5ah;
+ /*
+ * Adjust the DPLL based upon PCI clock, enable it,
+ * and wait for stabilization...
+ */
+ f_low = (pci_clk * 48) / dpll_clk;
- pci_read_config_byte(dev, 0x5a, ®5ah);
- /* interrupt force enable */
- pci_write_config_byte(dev, 0x5a, (reg5ah & ~0x10));
- return 0;
-}
+ for (adjust = 0; adjust < 8; adjust++) {
+ if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta))
+ break;
-static int __devinit init_hpt366(struct pci_dev *dev)
-{
- u32 reg1 = 0;
- u8 drive_fast = 0;
+ /*
+ * See if it'll settle at a fractionally different clock
+ */
+ if (adjust & 1)
+ f_low -= adjust >> 1;
+ else
+ f_low += adjust >> 1;
+ }
+ if (adjust == 8) {
+ printk(KERN_ERR "%s: DPLL did not stabilize!\n", name);
+ kfree(info);
+ return -EIO;
+ }
- /*
- * Disable the "fast interrupt" prediction.
- */
- pci_read_config_byte(dev, 0x51, &drive_fast);
- if (drive_fast & 0x80)
- pci_write_config_byte(dev, 0x51, drive_fast & ~0x80);
- pci_read_config_dword(dev, 0x40, ®1);
-
- return 0;
-}
+ printk("%s: using %d MHz DPLL clock\n", name, dpll_clk);
+ } else {
+ /* Mark the fact that we're not using the DPLL. */
+ dpll_clk = 0;
-static unsigned int __devinit init_chipset_hpt366(struct pci_dev *dev, const char *name)
-{
- int ret = 0;
+ printk("%s: using %d MHz PCI clock\n", name, pci_clk);
+ }
/*
- * FIXME: Not portable. Also, why do we enable the ROM in the first place?
- * We don't seem to be using it.
+ * Advance the table pointer to a slot which points to the list
+ * of the register values settings matching the clock being used.
*/
- if (dev->resource[PCI_ROM_RESOURCE].start)
- pci_write_config_dword(dev, PCI_ROM_ADDRESS,
- dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
+ info->settings += clock;
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
- pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
- pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
+ /* Store the clock frequencies. */
+ info->dpll_clk = dpll_clk;
+ info->pci_clk = pci_clk;
- if (hpt_revision(dev) >= 3)
- ret = init_hpt37x(dev);
- else
- ret = init_hpt366(dev);
+ /* Point to this chip's own instance of the hpt_info structure. */
+ pci_set_drvdata(dev, info);
- if (ret)
- return ret;
+ if (info->chip_type >= HPT370) {
+ u8 mcr1, mcr4;
+
+ /*
+ * Reset the state engines.
+ * NOTE: Avoid accidentally enabling the disabled channels.
+ */
+ pci_read_config_byte (dev, 0x50, &mcr1);
+ pci_read_config_byte (dev, 0x54, &mcr4);
+ pci_write_config_byte(dev, 0x50, (mcr1 | 0x32));
+ pci_write_config_byte(dev, 0x54, (mcr4 | 0x32));
+ udelay(100);
+ }
+
+ /*
+ * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
+ * the MISC. register to stretch the UltraDMA Tss timing.
+ * NOTE: This register is only writeable via I/O space.
+ */
+ if (info->chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
+
+ outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
return dev->irq;
}
static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
{
- struct pci_dev *dev = hwif->pci_dev;
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 ata66 = 0, regmask = (hwif->channel) ? 0x01 : 0x02;
+ struct pci_dev *dev = hwif->pci_dev;
+ struct hpt_info *info = pci_get_drvdata(dev);
int serialize = HPT_SERIALIZE_IO;
-
+ u8 scr1 = 0, ata66 = (hwif->channel) ? 0x01 : 0x02;
+ u8 chip_type = info->chip_type;
+ u8 new_mcr, old_mcr = 0;
+
+ /* Cache the channel's MISC. control registers' offset */
+ hwif->select_data = hwif->channel ? 0x54 : 0x50;
+
hwif->tuneproc = &hpt3xx_tune_drive;
hwif->speedproc = &hpt3xx_tune_chipset;
hwif->quirkproc = &hpt3xx_quirkproc;
hwif->intrproc = &hpt3xx_intrproc;
hwif->maskproc = &hpt3xx_maskproc;
-
+ hwif->busproc = &hpt3xx_busproc;
+
/*
* HPT3xxN chips have some complications:
*
* - on 33 MHz PCI we must clock switch
* - on 66 MHz PCI we must NOT use the PCI clock
*/
- if ((info->flags & (IS_3xxN | PCI_66MHZ)) == IS_3xxN) {
+ if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) {
/*
* Clock is shared between the channels,
* so we'll have to serialize them... :-(
hwif->rw_disk = &hpt3xxn_rw_disk;
}
+ /* Serialize access to this device if needed */
+ if (serialize && hwif->mate)
+ hwif->serialized = hwif->mate->serialized = 1;
+
+ /*
+ * Disable the "fast interrupt" prediction. Don't hold off
+ * on interrupts. (== 0x01 despite what the docs say)
+ */
+ pci_read_config_byte(dev, hwif->select_data + 1, &old_mcr);
+
+ if (info->chip_type >= HPT374)
+ new_mcr = old_mcr & ~0x07;
+ else if (info->chip_type >= HPT370) {
+ new_mcr = old_mcr;
+ new_mcr &= ~0x02;
+
+#ifdef HPT_DELAY_INTERRUPT
+ new_mcr &= ~0x01;
+#else
+ new_mcr |= 0x01;
+#endif
+ } else /* HPT366 and HPT368 */
+ new_mcr = old_mcr & ~0x80;
+
+ if (new_mcr != old_mcr)
+ pci_write_config_byte(dev, hwif->select_data + 1, new_mcr);
+
+ if (!hwif->dma_base) {
+ hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+ return;
+ }
+
+ hwif->ultra_mask = 0x7f;
+ hwif->mwdma_mask = 0x07;
+
/*
* The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external eeprom. To read valid
+ * address lines to access an external EEPROM. To read valid
* cable detect state the pins must be enabled as inputs.
*/
- if (info->revision >= 8 && (PCI_FUNC(dev->devfn) & 1)) {
+ if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
/*
* HPT374 PCI function 1
* - set bit 15 of reg 0x52 to enable TCBLID as input
* - set bit 15 of reg 0x56 to enable FCBLID as input
*/
- u16 mcr3, mcr6;
- pci_read_config_word(dev, 0x52, &mcr3);
- pci_read_config_word(dev, 0x56, &mcr6);
- pci_write_config_word(dev, 0x52, mcr3 | 0x8000);
- pci_write_config_word(dev, 0x56, mcr6 | 0x8000);
+ u8 mcr_addr = hwif->select_data + 2;
+ u16 mcr;
+
+ pci_read_config_word (dev, mcr_addr, &mcr);
+ pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
/* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &ata66);
- pci_write_config_word(dev, 0x52, mcr3);
- pci_write_config_word(dev, 0x56, mcr6);
- } else if (info->revision >= 3) {
+ pci_read_config_byte (dev, 0x5a, &scr1);
+ pci_write_config_word(dev, mcr_addr, mcr);
+ } else if (chip_type >= HPT370) {
/*
* HPT370/372 and 374 pcifn 0
- * - clear bit 0 of 0x5b to enable P/SCBLID as inputs
+ * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
*/
- u8 scr2;
- pci_read_config_byte(dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, scr2 & ~1);
- /* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &ata66);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else {
- pci_read_config_byte(dev, 0x5a, &ata66);
- }
+ u8 scr2 = 0;
-#ifdef DEBUG
- printk("HPT366: reg5ah=0x%02x ATA-%s Cable Port%d\n",
- ata66, (ata66 & regmask) ? "33" : "66",
- PCI_FUNC(hwif->pci_dev->devfn));
-#endif /* DEBUG */
-
- /* Serialize access to this device */
- if (serialize && hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
+ pci_read_config_byte (dev, 0x5b, &scr2);
+ pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
+ /* now read cable id register */
+ pci_read_config_byte (dev, 0x5a, &scr1);
+ pci_write_config_byte(dev, 0x5b, scr2);
+ } else
+ pci_read_config_byte (dev, 0x5a, &scr1);
- /*
- * Set up ioctl for power status.
- * NOTE: power affects both drives on each channel.
- */
- hwif->busproc = &hpt3xx_busproc;
+ if (!hwif->udma_four)
+ hwif->udma_four = (scr1 & ata66) ? 0 : 1;
- if (!hwif->dma_base) {
- hwif->drives[0].autotune = 1;
- hwif->drives[1].autotune = 1;
- return;
- }
+ hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;
- hwif->ultra_mask = 0x7f;
- hwif->mwdma_mask = 0x07;
-
- if (!(hwif->udma_four))
- hwif->udma_four = ((ata66 & regmask) ? 0 : 1);
- hwif->ide_dma_check = &hpt366_config_drive_xfer_rate;
-
- if (info->revision >= 8) {
- hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
- hwif->ide_dma_end = &hpt374_ide_dma_end;
- } else if (info->revision >= 5) {
- hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
- hwif->ide_dma_end = &hpt374_ide_dma_end;
- } else if (info->revision >= 3) {
- hwif->dma_start = &hpt370_ide_dma_start;
- hwif->ide_dma_end = &hpt370_ide_dma_end;
- hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
- hwif->ide_dma_lostirq = &hpt370_ide_dma_lostirq;
- } else if (info->revision >= 2)
- hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
- else
- hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
+ if (chip_type >= HPT374) {
+ hwif->ide_dma_test_irq = &hpt374_ide_dma_test_irq;
+ hwif->ide_dma_end = &hpt374_ide_dma_end;
+ } else if (chip_type >= HPT370) {
+ hwif->dma_start = &hpt370_ide_dma_start;
+ hwif->ide_dma_end = &hpt370_ide_dma_end;
+ hwif->ide_dma_timeout = &hpt370_ide_dma_timeout;
+ } else
+ hwif->ide_dma_lostirq = &hpt366_ide_dma_lostirq;
if (!noautodma)
hwif->autodma = 1;
- hwif->drives[0].autodma = hwif->autodma;
- hwif->drives[1].autodma = hwif->autodma;
+ hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
}
static void __devinit init_dma_hpt366(ide_hwif_t *hwif, unsigned long dmabase)
{
- struct hpt_info *info = ide_get_hwifdata(hwif);
- u8 masterdma = 0, slavedma = 0;
- u8 dma_new = 0, dma_old = 0;
- u8 primary = hwif->channel ? 0x4b : 0x43;
- u8 secondary = hwif->channel ? 0x4f : 0x47;
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 masterdma = 0, slavedma = 0;
+ u8 dma_new = 0, dma_old = 0;
unsigned long flags;
if (!dmabase)
return;
- if(info->speed == NULL) {
- printk(KERN_WARNING "hpt366: no known IDE timings, disabling DMA.\n");
- return;
- }
-
- dma_old = hwif->INB(dmabase+2);
+ dma_old = hwif->INB(dmabase + 2);
local_irq_save(flags);
dma_new = dma_old;
- pci_read_config_byte(hwif->pci_dev, primary, &masterdma);
- pci_read_config_byte(hwif->pci_dev, secondary, &slavedma);
+ pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
+ pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
if (masterdma & 0x30) dma_new |= 0x20;
- if (slavedma & 0x30) dma_new |= 0x40;
+ if ( slavedma & 0x30) dma_new |= 0x40;
if (dma_new != dma_old)
- hwif->OUTB(dma_new, dmabase+2);
+ hwif->OUTB(dma_new, dmabase + 2);
local_irq_restore(flags);
ide_setup_dma(hwif, dmabase, 8);
}
-/*
- * We "borrow" this hook in order to set the data structures
- * up early enough before dma or init_hwif calls are made.
- */
-
-static void __devinit init_iops_hpt366(ide_hwif_t *hwif)
-{
- struct hpt_info *info = kzalloc(sizeof(struct hpt_info), GFP_KERNEL);
- struct pci_dev *dev = hwif->pci_dev;
- u16 did = dev->device;
- u8 rid = 0;
-
- if(info == NULL) {
- printk(KERN_WARNING "hpt366: out of memory.\n");
- return;
- }
- ide_set_hwifdata(hwif, info);
-
- /* Avoid doing the same thing twice. */
- if (hwif->channel && hwif->mate) {
- memcpy(info, ide_get_hwifdata(hwif->mate), sizeof(struct hpt_info));
- return;
- }
-
- pci_read_config_byte(dev, PCI_CLASS_REVISION, &rid);
-
- if (( did == PCI_DEVICE_ID_TTI_HPT366 && rid == 6) ||
- ((did == PCI_DEVICE_ID_TTI_HPT372 ||
- did == PCI_DEVICE_ID_TTI_HPT302 ||
- did == PCI_DEVICE_ID_TTI_HPT371) && rid > 1) ||
- did == PCI_DEVICE_ID_TTI_HPT372N)
- info->flags |= IS_3xxN;
-
- info->revision = hpt_revision(dev);
-
- if (info->revision >= 3)
- hpt37x_clocking(hwif);
- else
- hpt366_clocking(hwif);
-}
-
static int __devinit init_setup_hpt374(struct pci_dev *dev, ide_pci_device_t *d)
{
- struct pci_dev *findev = NULL;
+ struct pci_dev *dev2;
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
- if ((findev->vendor == dev->vendor) &&
- (findev->device == dev->device) &&
- ((findev->devfn - dev->devfn) == 1) &&
- (PCI_FUNC(findev->devfn) & 1)) {
- if (findev->irq != dev->irq) {
- /* FIXME: we need a core pci_set_interrupt() */
- findev->irq = dev->irq;
- printk(KERN_WARNING "%s: pci-config space interrupt "
- "fixed.\n", d->name);
- }
- return ide_setup_pci_devices(dev, findev, d);
+ pci_set_drvdata(dev, &hpt374);
+
+ if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
+ int ret;
+
+ pci_set_drvdata(dev2, &hpt374);
+
+ if (dev2->irq != dev->irq) {
+ /* FIXME: we need a core pci_set_interrupt() */
+ dev2->irq = dev->irq;
+ printk(KERN_WARNING "%s: PCI config space interrupt "
+ "fixed.\n", d->name);
}
+ ret = ide_setup_pci_devices(dev, dev2, d);
+ if (ret < 0)
+ pci_dev_put(dev2);
+ return ret;
}
return ide_setup_pci_device(dev, d);
}
-static int __devinit init_setup_hpt37x(struct pci_dev *dev, ide_pci_device_t *d)
+static int __devinit init_setup_hpt372n(struct pci_dev *dev, ide_pci_device_t *d)
{
+ pci_set_drvdata(dev, &hpt372n);
+
return ide_setup_pci_device(dev, d);
}
static int __devinit init_setup_hpt371(struct pci_dev *dev, ide_pci_device_t *d)
{
- u8 mcr1 = 0;
+ struct hpt_info *info;
+ u8 rev = 0, mcr1 = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1) {
+ d->name = "HPT371N";
+
+ info = &hpt371n;
+ } else
+ info = &hpt371;
/*
* HPT371 chips physically have only one channel, the secondary one,
*/
pci_read_config_byte(dev, 0x50, &mcr1);
if (mcr1 & 0x04)
- pci_write_config_byte(dev, 0x50, (mcr1 & ~0x04));
+ pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
+
+ pci_set_drvdata(dev, info);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+static int __devinit init_setup_hpt372a(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ struct hpt_info *info;
+ u8 rev = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1) {
+ d->name = "HPT372N";
+
+ info = &hpt372n;
+ } else
+ info = &hpt372a;
+ pci_set_drvdata(dev, info);
+
+ return ide_setup_pci_device(dev, d);
+}
+
+static int __devinit init_setup_hpt302(struct pci_dev *dev, ide_pci_device_t *d)
+{
+ struct hpt_info *info;
+ u8 rev = 0;
+
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
+
+ if (rev > 1) {
+ d->name = "HPT302N";
+
+ info = &hpt302n;
+ } else
+ info = &hpt302;
+ pci_set_drvdata(dev, info);
return ide_setup_pci_device(dev, d);
}
static int __devinit init_setup_hpt366(struct pci_dev *dev, ide_pci_device_t *d)
{
- struct pci_dev *findev = NULL;
- u8 pin1 = 0, pin2 = 0;
- unsigned int class_rev;
- char *chipset_names[] = {"HPT366", "HPT366", "HPT368",
- "HPT370", "HPT370A", "HPT372",
- "HPT372N" };
+ struct pci_dev *dev2;
+ u8 rev = 0;
+ static char *chipset_names[] = { "HPT366", "HPT366", "HPT368",
+ "HPT370", "HPT370A", "HPT372",
+ "HPT372N" };
+ static struct hpt_info *info[] = { &hpt36x, &hpt36x, &hpt36x,
+ &hpt370, &hpt370a, &hpt372,
+ &hpt372n };
if (PCI_FUNC(dev->devfn) & 1)
return -ENODEV;
- pci_read_config_dword(dev, PCI_CLASS_REVISION, &class_rev);
- class_rev &= 0xff;
+ pci_read_config_byte(dev, PCI_REVISION_ID, &rev);
- if(dev->device == PCI_DEVICE_ID_TTI_HPT372N)
- class_rev = 6;
+ if (rev > 6)
+ rev = 6;
- if(class_rev <= 6)
- d->name = chipset_names[class_rev];
-
- switch(class_rev) {
- case 6:
- case 5:
- case 4:
- case 3:
- goto init_single;
- default:
- break;
- }
+ d->name = chipset_names[rev];
+
+ pci_set_drvdata(dev, info[rev]);
+
+ if (rev > 2)
+ goto init_single;
d->channels = 1;
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
- while ((findev = pci_find_device(PCI_ANY_ID, PCI_ANY_ID, findev)) != NULL) {
- if ((findev->vendor == dev->vendor) &&
- (findev->device == dev->device) &&
- ((findev->devfn - dev->devfn) == 1) &&
- (PCI_FUNC(findev->devfn) & 1)) {
- pci_read_config_byte(findev, PCI_INTERRUPT_PIN, &pin2);
- if ((pin1 != pin2) && (dev->irq == findev->irq)) {
- d->bootable = ON_BOARD;
- printk("%s: onboard version of chipset, "
- "pin1=%d pin2=%d\n", d->name,
- pin1, pin2);
- }
- return ide_setup_pci_devices(dev, findev, d);
+ if ((dev2 = pci_get_slot(dev->bus, dev->devfn + 1)) != NULL) {
+ u8 pin1 = 0, pin2 = 0;
+ int ret;
+
+ pci_set_drvdata(dev2, info[rev]);
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
+ pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
+ if (pin1 != pin2 && dev->irq == dev2->irq) {
+ d->bootable = ON_BOARD;
+ printk("%s: onboard version of chipset, pin1=%d pin2=%d\n",
+ d->name, pin1, pin2);
}
+ ret = ide_setup_pci_devices(dev, dev2, d);
+ if (ret < 0)
+ pci_dev_put(dev2);
+ return ret;
}
init_single:
return ide_setup_pci_device(dev, d);
.name = "HPT366",
.init_setup = init_setup_hpt366,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2,
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
.extra = 240
},{ /* 1 */
.name = "HPT372A",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt372a,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2,
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 2 */
.name = "HPT302",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt302,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2,
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 3 */
.name = "HPT371",
.init_setup = init_setup_hpt371,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2,
.autodma = AUTODMA,
.enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 4 */
.name = "HPT374",
.init_setup = init_setup_hpt374,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2, /* 4 */
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
},{ /* 5 */
.name = "HPT372N",
- .init_setup = init_setup_hpt37x,
+ .init_setup = init_setup_hpt372n,
.init_chipset = init_chipset_hpt366,
- .init_iops = init_iops_hpt366,
.init_hwif = init_hwif_hpt366,
.init_dma = init_dma_hpt366,
.channels = 2, /* 4 */
.autodma = AUTODMA,
+ .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
.bootable = OFF_BOARD,
+ .extra = 240
}
};
--- /dev/null
+/*
+ * ITE 8213 IDE driver
+ *
+ * Copyright (C) 2006 Jack Lee
+ * Copyright (C) 2006 Alan Cox
+ * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/hdreg.h>
+#include <linux/ide.h>
+#include <linux/init.h>
+
+#include <asm/io.h>
+
+/*
+ * it8213_ratemask - Compute available modes
+ * @drive: IDE drive
+ *
+ * Compute the available speeds for the devices on the interface. This
+ * is all modes to ATA133 clipped by drive cable setup.
+ */
+
+static u8 it8213_ratemask (ide_drive_t *drive)
+{
+ u8 mode = 4;
+ if (!eighty_ninty_three(drive))
+ mode = min_t(u8, mode, 1);
+ return mode;
+}
+
+/**
+ * it8213_dma_2_pio - return the PIO mode matching DMA
+ * @xfer_rate: transfer speed
+ *
+ * Returns the nearest equivalent PIO timing for the PIO or DMA
+ * mode requested by the controller.
+ */
+
+static u8 it8213_dma_2_pio (u8 xfer_rate) {
+ switch(xfer_rate) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_5:
+ case XFER_UDMA_4:
+ case XFER_UDMA_3:
+ case XFER_UDMA_2:
+ case XFER_UDMA_1:
+ case XFER_UDMA_0:
+ case XFER_MW_DMA_2:
+ case XFER_PIO_4:
+ return 4;
+ case XFER_MW_DMA_1:
+ case XFER_PIO_3:
+ return 3;
+ case XFER_SW_DMA_2:
+ case XFER_PIO_2:
+ return 2;
+ case XFER_MW_DMA_0:
+ case XFER_SW_DMA_1:
+ case XFER_SW_DMA_0:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ case XFER_PIO_SLOW:
+ default:
+ return 0;
+ }
+}
+
+/*
+ * it8213_tuneproc - tune a drive
+ * @drive: drive to tune
+ * @pio: desired PIO mode
+ *
+ * Set the interface PIO mode.
+ */
+
+static void it8213_tuneproc (ide_drive_t *drive, u8 pio)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ int is_slave = drive->dn & 1;
+ int master_port = 0x40;
+ int slave_port = 0x44;
+ unsigned long flags;
+ u16 master_data;
+ u8 slave_data;
+ static DEFINE_SPINLOCK(tune_lock);
+ int control = 0;
+
+ static const u8 timings[][2]= {
+ { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
+
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+
+ spin_lock_irqsave(&tune_lock, flags);
+ pci_read_config_word(dev, master_port, &master_data);
+
+ if (pio > 1)
+ control |= 1; /* Programmable timing on */
+ if (drive->media != ide_disk)
+ control |= 4; /* ATAPI */
+ if (pio > 2)
+ control |= 2; /* IORDY */
+ if (is_slave) {
+ master_data |= 0x4000;
+ master_data &= ~0x0070;
+ if (pio > 1)
+ master_data = master_data | (control << 4);
+ pci_read_config_byte(dev, slave_port, &slave_data);
+ slave_data = slave_data & 0xf0;
+ slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
+ } else {
+ master_data &= ~0x3307;
+ if (pio > 1)
+ master_data = master_data | control;
+ master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
+ }
+ pci_write_config_word(dev, master_port, master_data);
+ if (is_slave)
+ pci_write_config_byte(dev, slave_port, slave_data);
+ spin_unlock_irqrestore(&tune_lock, flags);
+}
+
+/**
+ * it8213_tune_chipset - set controller timings
+ * @drive: Drive to set up
+ * @xferspeed: speed we want to achieve
+ *
+ * Tune the ITE chipset for the desired mode. If we can't achieve
+ * the desired mode then tune for a lower one, but ultimately
+ * make the thing work.
+ */
+
+static int it8213_tune_chipset (ide_drive_t *drive, u8 xferspeed)
+{
+
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *dev = hwif->pci_dev;
+ u8 maslave = 0x40;
+ u8 speed = ide_rate_filter(it8213_ratemask(drive), xferspeed);
+ int a_speed = 3 << (drive->dn * 4);
+ int u_flag = 1 << drive->dn;
+ int v_flag = 0x01 << drive->dn;
+ int w_flag = 0x10 << drive->dn;
+ int u_speed = 0;
+ u16 reg4042, reg4a;
+ u8 reg48, reg54, reg55;
+
+ pci_read_config_word(dev, maslave, ®4042);
+ pci_read_config_byte(dev, 0x48, ®48);
+ pci_read_config_word(dev, 0x4a, ®4a);
+ pci_read_config_byte(dev, 0x54, ®54);
+ pci_read_config_byte(dev, 0x55, ®55);
+
+ switch(speed) {
+ case XFER_UDMA_6:
+ case XFER_UDMA_4:
+ case XFER_UDMA_2: u_speed = 2 << (drive->dn * 4); break;
+ case XFER_UDMA_5:
+ case XFER_UDMA_3:
+ case XFER_UDMA_1: u_speed = 1 << (drive->dn * 4); break;
+ case XFER_UDMA_0: u_speed = 0 << (drive->dn * 4); break;
+ break;
+ case XFER_MW_DMA_2:
+ case XFER_MW_DMA_1:
+ case XFER_SW_DMA_2:
+ break;
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ break;
+ default:
+ return -1;
+ }
+
+ if (speed >= XFER_UDMA_0) {
+ if (!(reg48 & u_flag))
+ pci_write_config_byte(dev, 0x48, reg48 | u_flag);
+ if (speed >= XFER_UDMA_5) {
+ pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
+ } else {
+ pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+ }
+
+ if ((reg4a & a_speed) != u_speed)
+ pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
+ if (speed > XFER_UDMA_2) {
+ if (!(reg54 & v_flag))
+ pci_write_config_byte(dev, 0x54, reg54 | v_flag);
+ } else
+ pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
+ } else {
+ if (reg48 & u_flag)
+ pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
+ if (reg4a & a_speed)
+ pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
+ if (reg54 & v_flag)
+ pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
+ if (reg55 & w_flag)
+ pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
+ }
+ it8213_tuneproc(drive, it8213_dma_2_pio(speed));
+ return ide_config_drive_speed(drive, speed);
+}
+
+/*
+ * config_chipset_for_dma - configure for DMA
+ * @drive: drive to configure
+ *
+ * Called by the IDE layer when it wants the timings set up.
+ */
+
+static int config_chipset_for_dma (ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, it8213_ratemask(drive));
+
+ if (!speed)
+ return 0;
+
+ it8213_tune_chipset(drive, speed);
+
+ return ide_dma_enable(drive);
+}
+
+/**
+ * it8213_configure_drive_for_dma - set up for DMA transfers
+ * @drive: drive we are going to set up
+ *
+ * Set up the drive for DMA, tune the controller and drive as
+ * required. If the drive isn't suitable for DMA or we hit
+ * other problems then we will drop down to PIO and set up
+ * PIO appropriately
+ */
+
+static int it8213_config_drive_for_dma (ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = drive->hwif;
+
+ if (ide_use_dma(drive)) {
+ if (config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+ }
+
+ hwif->speedproc(drive, XFER_PIO_0
+ + ide_get_best_pio_mode(drive, 255, 4, NULL));
+
+ return hwif->ide_dma_off_quietly(drive);
+}
+
+/**
+ * init_hwif_it8213 - set up hwif structs
+ * @hwif: interface to set up
+ *
+ * We do the basic set up of the interface structure. The IT8212
+ * requires several custom handlers so we override the default
+ * ide DMA handlers appropriately
+ */
+
+static void __devinit init_hwif_it8213(ide_hwif_t *hwif)
+{
+ u8 reg42h = 0, ata66 = 0;
+
+ hwif->speedproc = &it8213_tune_chipset;
+ hwif->tuneproc = &it8213_tuneproc;
+
+ hwif->autodma = 0;
+
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+
+ if (!hwif->dma_base)
+ return;
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x7f;
+ hwif->mwdma_mask = 0x06;
+ hwif->swdma_mask = 0x04;
+
+ pci_read_config_byte(hwif->pci_dev, 0x42, ®42h);
+ ata66 = (reg42h & 0x02) ? 0 : 1;
+
+ hwif->ide_dma_check = &it8213_config_drive_for_dma;
+ if (!(hwif->udma_four))
+ hwif->udma_four = ata66;
+
+ /*
+ * The BIOS often doesn't set up DMA on this controller
+ * so we always do it.
+ */
+ if (!noautodma)
+ hwif->autodma = 1;
+
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+
+#define DECLARE_ITE_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_hwif = init_hwif_it8213, \
+ .channels = 1, \
+ .autodma = AUTODMA, \
+ .enablebits = {{0x41,0x80,0x80}}, \
+ .bootable = ON_BOARD, \
+ }
+
+static ide_pci_device_t it8213_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_ITE_DEV("IT8213"),
+};
+
+
+/**
+ * it8213_init_one - pci layer discovery entry
+ * @dev: PCI device
+ * @id: ident table entry
+ *
+ * Called by the PCI code when it finds an ITE8213 controller. As
+ * this device follows the standard interfaces we can use the
+ * standard helper functions to do almost all the work for us.
+ */
+
+static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ide_setup_pci_device(dev, &it8213_chipsets[id->driver_data]);
+ return 0;
+}
+
+
+static struct pci_device_id it8213_pci_tbl[] = {
+ { PCI_VENDOR_ID_ITE, 0x8213, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { 0, },
+};
+
+MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "ITE8213_IDE",
+ .id_table = it8213_pci_tbl,
+ .probe = it8213_init_one,
+};
+
+static int __init it8213_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(it8213_ide_init);
+
+MODULE_AUTHOR("Jack Lee, Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
+MODULE_LICENSE("GPL");
return mode;
}
-static int check_in_drive_lists(ide_drive_t *drive, const char **list)
-{
- struct hd_driveid *id = drive->id;
-
- if (pdc_quirk_drives == list) {
- while (*list) {
- if (strstr(id->model, *list++)) {
- return 2;
- }
- }
- } else {
- while (*list) {
- if (!strcmp(*list++,id->model)) {
- return 1;
- }
- }
- }
- return 0;
-}
-
/**
* get_indexed_reg - Get indexed register
* @hwif: for the port address
return err;
}
-/* 0 1 2 3 4 5 6 7 8
- * 960, 480, 390, 300, 240, 180, 120, 90, 60
- * 180, 150, 120, 90, 60
- * DMA_Speed
- * 180, 120, 90, 90, 90, 60, 30
- * 11, 5, 4, 3, 2, 1, 0
- */
static void pdcnew_tune_drive(ide_drive_t *drive, u8 pio)
{
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
drive->init_speed = 0;
- if (id && (id->capability & 1) && drive->autodma) {
+ if ((id->capability & 1) && drive->autodma) {
- if (ide_use_dma(drive)) {
- if (config_chipset_for_dma(drive))
- return hwif->ide_dma_on(drive);
- }
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
goto fast_ata_pio;
static int pdcnew_quirkproc(ide_drive_t *drive)
{
- return check_in_drive_lists(drive, pdc_quirk_drives);
-}
+ const char **list, *model = drive->id->model;
-static int pdcnew_ide_dma_lostirq(ide_drive_t *drive)
-{
- if (HWIF(drive)->resetproc != NULL)
- HWIF(drive)->resetproc(drive);
- return __ide_dma_lostirq(drive);
-}
-
-static int pdcnew_ide_dma_timeout(ide_drive_t *drive)
-{
- if (HWIF(drive)->resetproc != NULL)
- HWIF(drive)->resetproc(drive);
- return __ide_dma_timeout(drive);
+ for (list = pdc_quirk_drives; *list != NULL; list++)
+ if (strstr(model, *list) != NULL)
+ return 2;
+ return 0;
}
static void pdcnew_reset(ide_drive_t *drive)
hwif->err_stops_fifo = 1;
hwif->ide_dma_check = &pdcnew_config_drive_xfer_rate;
- hwif->ide_dma_lostirq = &pdcnew_ide_dma_lostirq;
- hwif->ide_dma_timeout = &pdcnew_ide_dma_timeout;
if (!hwif->udma_four)
hwif->udma_four = pdcnew_cable_detect(hwif) ? 0 : 1;
return mode;
}
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
- struct hd_driveid *id = drive->id;
-
- if (pdc_quirk_drives == list) {
- while (*list) {
- if (strstr(id->model, *list++)) {
- return 2;
- }
- }
- } else {
- while (*list) {
- if (!strcmp(*list++,id->model)) {
- return 1;
- }
- }
- }
- return 0;
-}
-
static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
{
ide_hwif_t *hwif = HWIF(drive);
static int pdc202xx_quirkproc (ide_drive_t *drive)
{
- return ((int) check_in_drive_lists(drive, pdc_quirk_drives));
+ const char **list, *model = drive->id->model;
+
+ for (list = pdc_quirk_drives; *list != NULL; list++)
+ if (strstr(model, *list) != NULL)
+ return 2;
+ return 0;
}
static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
/*
- * linux/drivers/ide/pci/piix.c Version 0.45 May 12, 2006
+ * linux/drivers/ide/pci/piix.c Version 0.46 December 3, 2006
*
* Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
* if the drive cannot see an 80pin cable.
*/
if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+ mode = min_t(u8, mode, 1);
return mode;
}
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- int is_slave = (&hwif->drives[1] == drive);
+ int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
unsigned long flags;
static DEFINE_SPINLOCK(tune_lock);
int control = 0;
- /* ISP RTC */
+ /* ISP RTC */
static const u8 timings[][2]= {
{ 0, 0 },
{ 0, 0 },
{ 2, 1 },
{ 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
/*
* Master vs slave is synchronized above us but the slave register is
spin_lock_irqsave(&tune_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
- if (pio >= 2)
+ if (pio > 1)
control |= 1; /* Programmable timing on */
if (drive->media == ide_disk)
control |= 4; /* Prefetch, post write */
- if (pio >= 3)
+ if (pio > 2)
control |= 2; /* IORDY */
if (is_slave) {
- master_data = master_data | 0x4000;
+ master_data |= 0x4000;
+ master_data &= ~0x0070;
if (pio > 1) {
/* enable PPE, IE and TIME */
master_data = master_data | (control << 4);
- } else {
- master_data &= ~0x0070;
}
pci_read_config_byte(dev, slave_port, &slave_data);
slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
} else {
- master_data = master_data & 0xccf8;
+ master_data &= ~0x3307;
if (pio > 1) {
/* enable PPE, IE and TIME */
master_data = master_data | control;
/* 0 */ DECLARE_PIIX_DEV("PIIXa"),
/* 1 */ DECLARE_PIIX_DEV("PIIXb"),
- { /* 2 */
+ /* 2 */
+ { /*
+ * MPIIX actually has only a single IDE channel mapped to
+ * the primary or secondary ports depending on the value
+ * of the bit 14 of the IDETIM register at offset 0x6c
+ */
.name = "MPIIX",
.init_hwif = init_hwif_piix,
.channels = 2,
.autodma = NODMA,
- .enablebits = {{0x6D,0x80,0x80}, {0x6F,0x80,0x80}},
+ .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
.bootable = ON_BOARD,
+ .flags = IDEPCI_FLAG_ISA_PORTS
},
/* 3 */ DECLARE_PIIX_DEV("PIIX3"),
/*
- * linux/drivers/ide/pci/slc90e66.c Version 0.12 May 12, 2006
+ * linux/drivers/ide/pci/slc90e66.c Version 0.13 December 30, 2006
*
* Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
* Copyright (C) 2006 MontaVista Software, Inc. <source@mvista.com>
u8 mode = 2;
if (!eighty_ninty_three(drive))
- mode = min(mode, (u8)1);
+ mode = min_t(u8, mode, 1);
return mode;
}
{
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
- int is_slave = (&hwif->drives[1] == drive);
+ int is_slave = drive->dn & 1;
int master_port = hwif->channel ? 0x42 : 0x40;
int slave_port = 0x44;
unsigned long flags;
u16 master_data;
u8 slave_data;
- /* ISP RTC */
+ int control = 0;
+ /* ISP RTC */
static const u8 timings[][2]= {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
+ { 0, 0 },
+ { 0, 0 },
+ { 1, 0 },
+ { 2, 1 },
+ { 2, 3 }, };
- pio = ide_get_best_pio_mode(drive, pio, 5, NULL);
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
spin_lock_irqsave(&ide_lock, flags);
pci_read_config_word(dev, master_port, &master_data);
+
+ if (pio > 1)
+ control |= 1; /* Programmable timing on */
+ if (drive->media == ide_disk)
+ control |= 4; /* Prefetch, post write */
+ if (pio > 2)
+ control |= 2; /* IORDY */
if (is_slave) {
- master_data = master_data | 0x4000;
- if (pio > 1)
+ master_data |= 0x4000;
+ master_data &= ~0x0070;
+ if (pio > 1) {
/* enable PPE, IE and TIME */
- master_data = master_data | 0x0070;
+ master_data = master_data | (control << 4);
+ }
pci_read_config_byte(dev, slave_port, &slave_data);
slave_data = slave_data & (hwif->channel ? 0x0f : 0xf0);
slave_data = slave_data | (((timings[pio][0] << 2) | timings[pio][1]) << (hwif->channel ? 4 : 0));
} else {
- master_data = master_data & 0xccf8;
- if (pio > 1)
+ master_data &= ~0x3307;
+ if (pio > 1) {
/* enable PPE, IE and TIME */
- master_data = master_data | 0x0007;
+ master_data = master_data | control;
+ }
master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
}
pci_write_config_word(dev, master_port, master_data);
drive->init_speed = 0;
- if (id && (id->capability & 1) && drive->autodma) {
+ if ((id->capability & 1) && drive->autodma) {
if (ide_use_dma(drive) && slc90e66_config_drive_for_dma(drive))
return hwif->ide_dma_on(drive);
hwif->irq = hwif->channel ? 15 : 14;
hwif->speedproc = &slc90e66_tune_chipset;
- hwif->tuneproc = &slc90e66_tune_drive;
+ hwif->tuneproc = &slc90e66_tune_drive;
pci_read_config_byte(hwif->pci_dev, 0x47, ®47);
hwif->atapi_dma = 1;
hwif->ultra_mask = 0x1f;
- hwif->mwdma_mask = 0x07;
- hwif->swdma_mask = 0x07;
+ hwif->mwdma_mask = 0x06;
+ hwif->swdma_mask = 0x04;
- if (!(hwif->udma_four))
+ if (!hwif->udma_four) {
/* bit[0(1)]: 0:80, 1:40 */
hwif->udma_four = (reg47 & mask) ? 0 : 1;
+ }
hwif->ide_dma_check = &slc90e66_config_drive_xfer_rate;
+
if (!noautodma)
hwif->autodma = 1;
hwif->drives[0].autodma = hwif->autodma;
--- /dev/null
+/*
+ * drivers/ide/pci/tc86c001.c Version 1.00 Dec 12, 2006
+ *
+ * Copyright (C) 2002 Toshiba Corporation
+ * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+
+static inline u8 tc86c001_ratemask(ide_drive_t *drive)
+{
+ return eighty_ninty_three(drive) ? 2 : 1;
+}
+
+static int tc86c001_tune_chipset(ide_drive_t *drive, u8 speed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
+ u16 mode, scr = hwif->INW(scr_port);
+
+ speed = ide_rate_filter(tc86c001_ratemask(drive), speed);
+
+ switch (speed) {
+ case XFER_UDMA_4: mode = 0x00c0; break;
+ case XFER_UDMA_3: mode = 0x00b0; break;
+ case XFER_UDMA_2: mode = 0x00a0; break;
+ case XFER_UDMA_1: mode = 0x0090; break;
+ case XFER_UDMA_0: mode = 0x0080; break;
+ case XFER_MW_DMA_2: mode = 0x0070; break;
+ case XFER_MW_DMA_1: mode = 0x0060; break;
+ case XFER_MW_DMA_0: mode = 0x0050; break;
+ case XFER_PIO_4: mode = 0x0400; break;
+ case XFER_PIO_3: mode = 0x0300; break;
+ case XFER_PIO_2: mode = 0x0200; break;
+ case XFER_PIO_1: mode = 0x0100; break;
+ case XFER_PIO_0:
+ default: mode = 0x0000; break;
+ }
+
+ scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
+ scr |= mode;
+ hwif->OUTW(scr, scr_port);
+
+ return ide_config_drive_speed(drive, speed);
+}
+
+static void tc86c001_tune_drive(ide_drive_t *drive, u8 pio)
+{
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ (void) tc86c001_tune_chipset(drive, XFER_PIO_0 + pio);
+}
+
+/*
+ * HACKITY HACK
+ *
+ * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
+ * if a DMA transfer terminates prematurely, the controller leaves the device's
+ * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
+ * set the interrupt bit in the DMA status register), thus no PCI interrupt
+ * will occur until a DMA transfer has been successfully completed.
+ *
+ * We work around this by initiating dummy, zero-length DMA transfer on
+ * a DMA timeout expiration. I found no better way to do this with the current
+ * IDE core than to temporarily replace a higher level driver's timer expiry
+ * handler with our own backing up to that handler in case our recovery fails.
+ */
+static int tc86c001_timer_expiry(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ ide_expiry_t *expiry = ide_get_hwifdata(hwif);
+ ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ u8 dma_stat = hwif->INB(hwif->dma_status);
+
+ /* Restore a higher level driver's expiry handler first. */
+ hwgroup->expiry = expiry;
+
+ if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
+ unsigned long sc_base = hwif->config_data;
+ unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
+ u8 dma_cmd = hwif->INB(hwif->dma_command);
+
+ printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
+ "attempting recovery...\n", drive->name);
+
+ /* Stop DMA */
+ hwif->OUTB(dma_cmd & ~0x01, hwif->dma_command);
+
+ /* Setup the dummy DMA transfer */
+ hwif->OUTW(0, sc_base + 0x0a); /* Sector Count */
+ hwif->OUTW(0, twcr_port); /* Transfer Word Count 1 or 2 */
+
+ /* Start the dummy DMA transfer */
+ hwif->OUTB(0x00, hwif->dma_command); /* clear R_OR_WCTR for write */
+ hwif->OUTB(0x01, hwif->dma_command); /* set START_STOPBM */
+
+ /*
+ * If an interrupt was pending, it should come thru shortly.
+ * If not, a higher level driver's expiry handler should
+ * eventually cause some kind of recovery from the DMA stall.
+ */
+ return WAIT_MIN_SLEEP;
+ }
+
+ /* Chain to the restored expiry handler if DMA wasn't active. */
+ if (likely(expiry != NULL))
+ return expiry(drive);
+
+ /* If there was no handler, "emulate" that for ide_timer_expiry()... */
+ return -1;
+}
+
+static void tc86c001_dma_start(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ ide_hwgroup_t *hwgroup = HWGROUP(drive);
+ unsigned long sc_base = hwif->config_data;
+ unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
+ unsigned long nsectors = hwgroup->rq->nr_sectors;
+
+ /*
+ * We have to manually load the sector count and size into
+ * the appropriate system control registers for DMA to work
+ * with LBA48 and ATAPI devices...
+ */
+ hwif->OUTW(nsectors, sc_base + 0x0a); /* Sector Count */
+ hwif->OUTW(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
+
+ /* Install our timeout expiry hook, saving the current handler... */
+ ide_set_hwifdata(hwif, hwgroup->expiry);
+ hwgroup->expiry = &tc86c001_timer_expiry;
+
+ ide_dma_start(drive);
+}
+
+static int tc86c001_busproc(ide_drive_t *drive, int state)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ unsigned long sc_base = hwif->config_data;
+ u16 scr1;
+
+ /* System Control 1 Register bit 11 (ATA Hard Reset) read */
+ scr1 = hwif->INW(sc_base + 0x00);
+
+ switch (state) {
+ case BUSSTATE_ON:
+ if (!(scr1 & 0x0800))
+ return 0;
+ scr1 &= ~0x0800;
+
+ hwif->drives[0].failures = hwif->drives[1].failures = 0;
+ break;
+ case BUSSTATE_OFF:
+ if (scr1 & 0x0800)
+ return 0;
+ scr1 |= 0x0800;
+
+ hwif->drives[0].failures = hwif->drives[0].max_failures + 1;
+ hwif->drives[1].failures = hwif->drives[1].max_failures + 1;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* System Control 1 Register bit 11 (ATA Hard Reset) write */
+ hwif->OUTW(scr1, sc_base + 0x00);
+ return 0;
+}
+
+static int config_chipset_for_dma(ide_drive_t *drive)
+{
+ u8 speed = ide_dma_speed(drive, tc86c001_ratemask(drive));
+
+ if (!speed)
+ return 0;
+
+ (void) tc86c001_tune_chipset(drive, speed);
+ return ide_dma_enable(drive);
+}
+
+static int tc86c001_config_drive_xfer_rate(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
+
+ if ((id->capability & 1) && drive->autodma) {
+
+ if (ide_use_dma(drive) && config_chipset_for_dma(drive))
+ return hwif->ide_dma_on(drive);
+
+ goto fast_ata_pio;
+
+ } else if ((id->capability & 8) || (id->field_valid & 2)) {
+fast_ata_pio:
+ tc86c001_tune_drive(drive, 255);
+ return hwif->ide_dma_off_quietly(drive);
+ }
+ /* IORDY not supported */
+ return 0;
+}
+
+static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
+{
+ unsigned long sc_base = pci_resource_start(hwif->pci_dev, 5);
+ u16 scr1 = hwif->INW(sc_base + 0x00);;
+
+ /* System Control 1 Register bit 15 (Soft Reset) set */
+ hwif->OUTW(scr1 | 0x8000, sc_base + 0x00);
+
+ /* System Control 1 Register bit 14 (FIFO Reset) set */
+ hwif->OUTW(scr1 | 0x4000, sc_base + 0x00);
+
+ /* System Control 1 Register: reset clear */
+ hwif->OUTW(scr1 & ~0xc000, sc_base + 0x00);
+
+ /* Store the system control register base for convenience... */
+ hwif->config_data = sc_base;
+
+ hwif->tuneproc = &tc86c001_tune_drive;
+ hwif->speedproc = &tc86c001_tune_chipset;
+ hwif->busproc = &tc86c001_busproc;
+
+ hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
+
+ if (!hwif->dma_base)
+ return;
+
+ /*
+ * Sector Count Control Register bits 0 and 1 set:
+ * software sets Sector Count Register for master and slave device
+ */
+ hwif->OUTW(0x0003, sc_base + 0x0c);
+
+ /* Sector Count Register limit */
+ hwif->rqsize = 0xffff;
+
+ hwif->atapi_dma = 1;
+ hwif->ultra_mask = 0x1f;
+ hwif->mwdma_mask = 0x07;
+
+ hwif->ide_dma_check = &tc86c001_config_drive_xfer_rate;
+ hwif->dma_start = &tc86c001_dma_start;
+
+ if (!hwif->udma_four) {
+ /*
+ * System Control 1 Register bit 13 (PDIAGN):
+ * 0=80-pin cable, 1=40-pin cable
+ */
+ scr1 = hwif->INW(sc_base + 0x00);
+ hwif->udma_four = (scr1 & 0x2000) ? 0 : 1;
+ }
+
+ if (!noautodma)
+ hwif->autodma = 1;
+ hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
+}
+
+static unsigned int __devinit init_chipset_tc86c001(struct pci_dev *dev,
+ const char *name)
+{
+ int err = pci_request_region(dev, 5, name);
+
+ if (err)
+ printk(KERN_ERR "%s: system control regs already in use", name);
+ return err;
+}
+
+static ide_pci_device_t tc86c001_chipset __devinitdata = {
+ .name = "TC86C001",
+ .init_chipset = init_chipset_tc86c001,
+ .init_hwif = init_hwif_tc86c001,
+ .channels = 1,
+ .autodma = AUTODMA,
+ .bootable = OFF_BOARD
+};
+
+static int __devinit tc86c001_init_one(struct pci_dev *dev,
+ const struct pci_device_id *id)
+{
+ return ide_setup_pci_device(dev, &tc86c001_chipset);
+}
+
+static struct pci_device_id tc86c001_pci_tbl[] = {
+ { PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "TC86C001",
+ .id_table = tc86c001_pci_tbl,
+ .probe = tc86c001_init_one
+};
+
+static int __init tc86c001_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+module_init(tc86c001_ide_init);
+
+MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
+MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
+MODULE_LICENSE("GPL");
* Returns are the same as for pci_register_driver
*/
-int __ide_pci_register_driver(struct pci_driver *driver, struct module *module)
+int __ide_pci_register_driver(struct pci_driver *driver, struct module *module,
+ const char *mod_name)
{
if(!pre_init)
- return __pci_register_driver(driver, module);
+ return __pci_register_driver(driver, module, mod_name);
driver->driver.owner = module;
list_add_tail(&driver->node, &ide_pci_drivers);
return 0;
{
list_del(l);
d = list_entry(l, struct pci_driver, node);
- __pci_register_driver(d, d->driver.owner);
+ __pci_register_driver(d, d->driver.owner, d->driver.mod_name);
}
}
if (event == NETEVENT_NEIGH_UPDATE) {
struct neighbour *neigh = ctx;
- if (neigh->dev->type == ARPHRD_INFINIBAND &&
- (neigh->nud_state & NUD_VALID)) {
+ if (neigh->nud_state & NUD_VALID) {
set_timeout(jiffies);
}
}
spin_unlock_irqrestore(&qp_info->snoop_lock, flags);
}
-static void build_smp_wc(u64 wr_id, u16 slid, u16 pkey_index, u8 port_num,
+static void build_smp_wc(struct ib_qp *qp,
+ u64 wr_id, u16 slid, u16 pkey_index, u8 port_num,
struct ib_wc *wc)
{
memset(wc, 0, sizeof *wc);
wc->pkey_index = pkey_index;
wc->byte_len = sizeof(struct ib_mad) + sizeof(struct ib_grh);
wc->src_qp = IB_QP0;
- wc->qp_num = IB_QP0;
+ wc->qp = qp;
wc->slid = slid;
wc->sl = 0;
wc->dlid_path_bits = 0;
goto out;
}
- build_smp_wc(send_wr->wr_id, be16_to_cpu(smp->dr_slid),
+ build_smp_wc(mad_agent_priv->agent.qp,
+ send_wr->wr_id, be16_to_cpu(smp->dr_slid),
send_wr->wr.ud.pkey_index,
send_wr->wr.ud.port_num, &mad_wc);
* Defined behavior is to complete response
* before request
*/
- build_smp_wc((unsigned long) local->mad_send_wr,
+ build_smp_wc(recv_mad_agent->agent.qp,
+ (unsigned long) local->mad_send_wr,
be16_to_cpu(IB_LID_PERMISSIVE),
0, recv_mad_agent->agent.port_num, &wc);
resp->wc[i].vendor_err = wc[i].vendor_err;
resp->wc[i].byte_len = wc[i].byte_len;
resp->wc[i].imm_data = (__u32 __force) wc[i].imm_data;
- resp->wc[i].qp_num = wc[i].qp_num;
+ resp->wc[i].qp_num = wc[i].qp->qp_num;
resp->wc[i].src_qp = wc[i].src_qp;
resp->wc[i].wc_flags = wc[i].wc_flags;
resp->wc[i].pkey_index = wc[i].pkey_index;
entry->status = c2_cqe_status_to_openib(c2_wr_get_result(ce));
entry->wr_id = ce->hdr.context;
- entry->qp_num = ce->handle;
+ entry->qp = &qp->ibqp;
entry->wc_flags = 0;
entry->slid = 0;
entry->sl = 0;
struct ipz_qp_handle ipz_qp_handle;
struct ehca_pfqp pf;
struct ib_qp_init_attr init_attr;
- u64 uspace_squeue;
- u64 uspace_rqueue;
- u64 uspace_fwh;
struct ehca_cq *send_cq;
struct ehca_cq *recv_cq;
unsigned int sqerr_purgeflag;
struct hlist_node list_entries;
+ /* mmap counter for resources mapped into user space */
+ u32 mm_count_squeue;
+ u32 mm_count_rqueue;
+ u32 mm_count_galpa;
};
/* must be power of 2 */
struct ipz_cq_handle ipz_cq_handle;
struct ehca_pfcq pf;
spinlock_t cb_lock;
- u64 uspace_queue;
- u64 uspace_fwh;
struct hlist_head qp_hashtab[QP_HASHTAB_LEN];
struct list_head entry;
u32 nr_callbacks;
spinlock_t task_lock;
u32 ownpid;
+ /* mmap counter for resources mapped into user space */
+ u32 mm_count_queue;
+ u32 mm_count_galpa;
};
enum ehca_mr_flag {
struct ib_ucontext ib_ucontext;
};
-struct ehca_module *ehca_module_new(void);
-
-int ehca_module_delete(struct ehca_module *me);
-
-int ehca_eq_ctor(struct ehca_eq *eq);
-
-int ehca_eq_dtor(struct ehca_eq *eq);
-
-struct ehca_shca *ehca_shca_new(void);
-
-int ehca_shca_delete(struct ehca_shca *me);
-
-struct ehca_sport *ehca_sport_new(struct ehca_shca *anchor);
-
int ehca_init_pd_cache(void);
void ehca_cleanup_pd_cache(void);
int ehca_init_cq_cache(void);
extern int ehca_use_hp_mr;
struct ipzu_queue_resp {
- u64 queue; /* points to first queue entry */
u32 qe_size; /* queue entry size */
u32 act_nr_of_sg;
u32 queue_length; /* queue length allocated in bytes */
u32 cq_number;
u32 token;
struct ipzu_queue_resp ipz_queue;
- struct h_galpas galpas;
};
struct ehca_create_qp_resp {
u32 dummy; /* padding for 8 byte alignment */
struct ipzu_queue_resp ipz_squeue;
struct ipzu_queue_resp ipz_rqueue;
- struct h_galpas galpas;
};
struct ehca_alloc_cq_parms {
if (context) {
struct ipz_queue *ipz_queue = &my_cq->ipz_queue;
struct ehca_create_cq_resp resp;
- struct vm_area_struct *vma;
memset(&resp, 0, sizeof(resp));
resp.cq_number = my_cq->cq_number;
resp.token = my_cq->token;
resp.ipz_queue.queue_length = ipz_queue->queue_length;
resp.ipz_queue.pagesize = ipz_queue->pagesize;
resp.ipz_queue.toggle_state = ipz_queue->toggle_state;
- ret = ehca_mmap_nopage(((u64)(my_cq->token) << 32) | 0x12000000,
- ipz_queue->queue_length,
- (void**)&resp.ipz_queue.queue,
- &vma);
- if (ret) {
- ehca_err(device, "Could not mmap queue pages");
- cq = ERR_PTR(ret);
- goto create_cq_exit4;
- }
- my_cq->uspace_queue = resp.ipz_queue.queue;
- resp.galpas = my_cq->galpas;
- ret = ehca_mmap_register(my_cq->galpas.user.fw_handle,
- (void**)&resp.galpas.kernel.fw_handle,
- &vma);
- if (ret) {
- ehca_err(device, "Could not mmap fw_handle");
- cq = ERR_PTR(ret);
- goto create_cq_exit5;
- }
- my_cq->uspace_fwh = (u64)resp.galpas.kernel.fw_handle;
if (ib_copy_to_udata(udata, &resp, sizeof(resp))) {
ehca_err(device, "Copy to udata failed.");
- goto create_cq_exit6;
+ goto create_cq_exit4;
}
}
return cq;
-create_cq_exit6:
- ehca_munmap(my_cq->uspace_fwh, EHCA_PAGESIZE);
-
-create_cq_exit5:
- ehca_munmap(my_cq->uspace_queue, my_cq->ipz_queue.queue_length);
-
create_cq_exit4:
ipz_queue_dtor(&my_cq->ipz_queue);
int ehca_destroy_cq(struct ib_cq *cq)
{
u64 h_ret;
- int ret;
struct ehca_cq *my_cq = container_of(cq, struct ehca_cq, ib_cq);
int cq_num = my_cq->cq_number;
struct ib_device *device = cq->device;
u32 cur_pid = current->tgid;
unsigned long flags;
+ if (cq->uobject) {
+ if (my_cq->mm_count_galpa || my_cq->mm_count_queue) {
+ ehca_err(device, "Resources still referenced in "
+ "user space cq_num=%x", my_cq->cq_number);
+ return -EINVAL;
+ }
+ if (my_cq->ownpid != cur_pid) {
+ ehca_err(device, "Invalid caller pid=%x ownpid=%x "
+ "cq_num=%x",
+ cur_pid, my_cq->ownpid, my_cq->cq_number);
+ return -EINVAL;
+ }
+ }
+
spin_lock_irqsave(&ehca_cq_idr_lock, flags);
while (my_cq->nr_callbacks) {
spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
idr_remove(&ehca_cq_idr, my_cq->token);
spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
- if (my_cq->uspace_queue && my_cq->ownpid != cur_pid) {
- ehca_err(device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_cq->ownpid);
- return -EINVAL;
- }
-
- /* un-mmap if vma alloc */
- if (my_cq->uspace_queue ) {
- ret = ehca_munmap(my_cq->uspace_queue,
- my_cq->ipz_queue.queue_length);
- if (ret)
- ehca_err(device, "Could not munmap queue ehca_cq=%p "
- "cq_num=%x", my_cq, cq_num);
- ret = ehca_munmap(my_cq->uspace_fwh, EHCA_PAGESIZE);
- if (ret)
- ehca_err(device, "Could not munmap fwh ehca_cq=%p "
- "cq_num=%x", my_cq, cq_num);
- }
-
h_ret = hipz_h_destroy_cq(adapter_handle, my_cq, 0);
if (h_ret == H_R_STATE) {
/* cq in err: read err data and destroy it forcibly */
struct ehca_cq *my_cq = container_of(cq, struct ehca_cq, ib_cq);
u32 cur_pid = current->tgid;
- if (my_cq->uspace_queue && my_cq->ownpid != cur_pid) {
+ if (cq->uobject && my_cq->ownpid != cur_pid) {
ehca_err(cq->device, "Invalid caller pid=%x ownpid=%x",
cur_pid, my_cq->ownpid);
return -EINVAL;
void ehca_poll_eqs(unsigned long data);
-int ehca_mmap_nopage(u64 foffset,u64 length,void **mapped,
- struct vm_area_struct **vma);
-
-int ehca_mmap_register(u64 physical,void **mapped,
- struct vm_area_struct **vma);
-
-int ehca_munmap(unsigned long addr, size_t len);
-
#ifdef CONFIG_PPC_64K_PAGES
void *ehca_alloc_fw_ctrlblock(gfp_t flags);
void ehca_free_fw_ctrlblock(void *ptr);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_AUTHOR("Christoph Raisch <raisch@de.ibm.com>");
MODULE_DESCRIPTION("IBM eServer HCA InfiniBand Device Driver");
-MODULE_VERSION("SVNEHCA_0019");
+MODULE_VERSION("SVNEHCA_0020");
int ehca_open_aqp1 = 0;
int ehca_debug_level = 0;
strlcpy(shca->ib_device.name, "ehca%d", IB_DEVICE_NAME_MAX);
shca->ib_device.owner = THIS_MODULE;
- shca->ib_device.uverbs_abi_ver = 5;
+ shca->ib_device.uverbs_abi_ver = 6;
shca->ib_device.uverbs_cmd_mask =
(1ull << IB_USER_VERBS_CMD_GET_CONTEXT) |
(1ull << IB_USER_VERBS_CMD_QUERY_DEVICE) |
int ret;
printk(KERN_INFO "eHCA Infiniband Device Driver "
- "(Rel.: SVNEHCA_0019)\n");
+ "(Rel.: SVNEHCA_0020)\n");
idr_init(&ehca_qp_idr);
idr_init(&ehca_cq_idr);
spin_lock_init(&ehca_qp_idr_lock);
struct ipz_queue *ipz_rqueue = &my_qp->ipz_rqueue;
struct ipz_queue *ipz_squeue = &my_qp->ipz_squeue;
struct ehca_create_qp_resp resp;
- struct vm_area_struct * vma;
memset(&resp, 0, sizeof(resp));
resp.qp_num = my_qp->real_qp_num;
resp.ipz_rqueue.queue_length = ipz_rqueue->queue_length;
resp.ipz_rqueue.pagesize = ipz_rqueue->pagesize;
resp.ipz_rqueue.toggle_state = ipz_rqueue->toggle_state;
- ret = ehca_mmap_nopage(((u64)(my_qp->token) << 32) | 0x22000000,
- ipz_rqueue->queue_length,
- (void**)&resp.ipz_rqueue.queue,
- &vma);
- if (ret) {
- ehca_err(pd->device, "Could not mmap rqueue pages");
- goto create_qp_exit3;
- }
- my_qp->uspace_rqueue = resp.ipz_rqueue.queue;
/* squeue properties */
resp.ipz_squeue.qe_size = ipz_squeue->qe_size;
resp.ipz_squeue.act_nr_of_sg = ipz_squeue->act_nr_of_sg;
resp.ipz_squeue.queue_length = ipz_squeue->queue_length;
resp.ipz_squeue.pagesize = ipz_squeue->pagesize;
resp.ipz_squeue.toggle_state = ipz_squeue->toggle_state;
- ret = ehca_mmap_nopage(((u64)(my_qp->token) << 32) | 0x23000000,
- ipz_squeue->queue_length,
- (void**)&resp.ipz_squeue.queue,
- &vma);
- if (ret) {
- ehca_err(pd->device, "Could not mmap squeue pages");
- goto create_qp_exit4;
- }
- my_qp->uspace_squeue = resp.ipz_squeue.queue;
- /* fw_handle */
- resp.galpas = my_qp->galpas;
- ret = ehca_mmap_register(my_qp->galpas.user.fw_handle,
- (void**)&resp.galpas.kernel.fw_handle,
- &vma);
- if (ret) {
- ehca_err(pd->device, "Could not mmap fw_handle");
- goto create_qp_exit5;
- }
- my_qp->uspace_fwh = (u64)resp.galpas.kernel.fw_handle;
-
if (ib_copy_to_udata(udata, &resp, sizeof resp)) {
ehca_err(pd->device, "Copy to udata failed");
ret = -EINVAL;
- goto create_qp_exit6;
+ goto create_qp_exit3;
}
}
return &my_qp->ib_qp;
-create_qp_exit6:
- ehca_munmap(my_qp->uspace_fwh, EHCA_PAGESIZE);
-
-create_qp_exit5:
- ehca_munmap(my_qp->uspace_squeue, my_qp->ipz_squeue.queue_length);
-
-create_qp_exit4:
- ehca_munmap(my_qp->uspace_rqueue, my_qp->ipz_rqueue.queue_length);
-
create_qp_exit3:
ipz_queue_dtor(&my_qp->ipz_rqueue);
ipz_queue_dtor(&my_qp->ipz_squeue);
my_qp->qp_type == IB_QPT_SMI) &&
statetrans == IB_QPST_SQE2RTS) {
/* mark next free wqe if kernel */
- if (my_qp->uspace_squeue == 0) {
+ if (!ibqp->uobject) {
struct ehca_wqe *wqe;
/* lock send queue */
spin_lock_irqsave(&my_qp->spinlock_s, spl_flags);
enum ib_qp_type qp_type;
unsigned long flags;
- if (my_pd->ib_pd.uobject && my_pd->ib_pd.uobject->context &&
- my_pd->ownpid != cur_pid) {
- ehca_err(ibqp->device, "Invalid caller pid=%x ownpid=%x",
- cur_pid, my_pd->ownpid);
- return -EINVAL;
+ if (ibqp->uobject) {
+ if (my_qp->mm_count_galpa ||
+ my_qp->mm_count_rqueue || my_qp->mm_count_squeue) {
+ ehca_err(ibqp->device, "Resources still referenced in "
+ "user space qp_num=%x", ibqp->qp_num);
+ return -EINVAL;
+ }
+ if (my_pd->ownpid != cur_pid) {
+ ehca_err(ibqp->device, "Invalid caller pid=%x ownpid=%x",
+ cur_pid, my_pd->ownpid);
+ return -EINVAL;
+ }
}
if (my_qp->send_cq) {
idr_remove(&ehca_qp_idr, my_qp->token);
spin_unlock_irqrestore(&ehca_qp_idr_lock, flags);
- /* un-mmap if vma alloc */
- if (my_qp->uspace_rqueue) {
- ret = ehca_munmap(my_qp->uspace_rqueue,
- my_qp->ipz_rqueue.queue_length);
- if (ret)
- ehca_err(ibqp->device, "Could not munmap rqueue "
- "qp_num=%x", qp_num);
- ret = ehca_munmap(my_qp->uspace_squeue,
- my_qp->ipz_squeue.queue_length);
- if (ret)
- ehca_err(ibqp->device, "Could not munmap squeue "
- "qp_num=%x", qp_num);
- ret = ehca_munmap(my_qp->uspace_fwh, EHCA_PAGESIZE);
- if (ret)
- ehca_err(ibqp->device, "Could not munmap fwh qp_num=%x",
- qp_num);
- }
-
h_ret = hipz_h_destroy_qp(shca->ipz_hca_handle, my_qp);
if (h_ret != H_SUCCESS) {
ehca_err(ibqp->device, "hipz_h_destroy_qp() failed rc=%lx "
} else
wc->status = IB_WC_SUCCESS;
- wc->qp_num = cqe->local_qp_number;
+ wc->qp = NULL;
wc->byte_len = cqe->nr_bytes_transferred;
wc->pkey_index = cqe->pkey_index;
wc->slid = cqe->rlid;
return 0;
}
-struct page *ehca_nopage(struct vm_area_struct *vma,
- unsigned long address, int *type)
+static void ehca_mm_open(struct vm_area_struct *vma)
{
- struct page *mypage = NULL;
- u64 fileoffset = vma->vm_pgoff << PAGE_SHIFT;
- u32 idr_handle = fileoffset >> 32;
- u32 q_type = (fileoffset >> 28) & 0xF; /* CQ, QP,... */
- u32 rsrc_type = (fileoffset >> 24) & 0xF; /* sq,rq,cmnd_window */
- u32 cur_pid = current->tgid;
- unsigned long flags;
- struct ehca_cq *cq;
- struct ehca_qp *qp;
- struct ehca_pd *pd;
- u64 offset;
- void *vaddr;
+ u32 *count = (u32*)vma->vm_private_data;
+ if (!count) {
+ ehca_gen_err("Invalid vma struct vm_start=%lx vm_end=%lx",
+ vma->vm_start, vma->vm_end);
+ return;
+ }
+ (*count)++;
+ if (!(*count))
+ ehca_gen_err("Use count overflow vm_start=%lx vm_end=%lx",
+ vma->vm_start, vma->vm_end);
+ ehca_gen_dbg("vm_start=%lx vm_end=%lx count=%x",
+ vma->vm_start, vma->vm_end, *count);
+}
- switch (q_type) {
- case 1: /* CQ */
- spin_lock_irqsave(&ehca_cq_idr_lock, flags);
- cq = idr_find(&ehca_cq_idr, idr_handle);
- spin_unlock_irqrestore(&ehca_cq_idr_lock, flags);
+static void ehca_mm_close(struct vm_area_struct *vma)
+{
+ u32 *count = (u32*)vma->vm_private_data;
+ if (!count) {
+ ehca_gen_err("Invalid vma struct vm_start=%lx vm_end=%lx",
+ vma->vm_start, vma->vm_end);
+ return;
+ }
+ (*count)--;
+ ehca_gen_dbg("vm_start=%lx vm_end=%lx count=%x",
+ vma->vm_start, vma->vm_end, *count);
+}
- /* make sure this mmap really belongs to the authorized user */
- if (!cq) {
- ehca_gen_err("cq is NULL ret=NOPAGE_SIGBUS");
- return NOPAGE_SIGBUS;
+static struct vm_operations_struct vm_ops = {
+ .open = ehca_mm_open,
+ .close = ehca_mm_close,
+};
+
+static int ehca_mmap_fw(struct vm_area_struct *vma, struct h_galpas *galpas,
+ u32 *mm_count)
+{
+ int ret;
+ u64 vsize, physical;
+
+ vsize = vma->vm_end - vma->vm_start;
+ if (vsize != EHCA_PAGESIZE) {
+ ehca_gen_err("invalid vsize=%lx", vma->vm_end - vma->vm_start);
+ return -EINVAL;
+ }
+
+ physical = galpas->user.fw_handle;
+ vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+ ehca_gen_dbg("vsize=%lx physical=%lx", vsize, physical);
+ /* VM_IO | VM_RESERVED are set by remap_pfn_range() */
+ ret = remap_pfn_range(vma, vma->vm_start, physical >> PAGE_SHIFT,
+ vsize, vma->vm_page_prot);
+ if (unlikely(ret)) {
+ ehca_gen_err("remap_pfn_range() failed ret=%x", ret);
+ return -ENOMEM;
+ }
+
+ vma->vm_private_data = mm_count;
+ (*mm_count)++;
+ vma->vm_ops = &vm_ops;
+
+ return 0;
+}
+
+static int ehca_mmap_queue(struct vm_area_struct *vma, struct ipz_queue *queue,
+ u32 *mm_count)
+{
+ int ret;
+ u64 start, ofs;
+ struct page *page;
+
+ vma->vm_flags |= VM_RESERVED;
+ start = vma->vm_start;
+ for (ofs = 0; ofs < queue->queue_length; ofs += PAGE_SIZE) {
+ u64 virt_addr = (u64)ipz_qeit_calc(queue, ofs);
+ page = virt_to_page(virt_addr);
+ ret = vm_insert_page(vma, start, page);
+ if (unlikely(ret)) {
+ ehca_gen_err("vm_insert_page() failed rc=%x", ret);
+ return ret;
}
+ start += PAGE_SIZE;
+ }
+ vma->vm_private_data = mm_count;
+ (*mm_count)++;
+ vma->vm_ops = &vm_ops;
- if (cq->ownpid != cur_pid) {
+ return 0;
+}
+
+static int ehca_mmap_cq(struct vm_area_struct *vma, struct ehca_cq *cq,
+ u32 rsrc_type)
+{
+ int ret;
+
+ switch (rsrc_type) {
+ case 1: /* galpa fw handle */
+ ehca_dbg(cq->ib_cq.device, "cq_num=%x fw", cq->cq_number);
+ ret = ehca_mmap_fw(vma, &cq->galpas, &cq->mm_count_galpa);
+ if (unlikely(ret)) {
ehca_err(cq->ib_cq.device,
- "Invalid caller pid=%x ownpid=%x",
- cur_pid, cq->ownpid);
- return NOPAGE_SIGBUS;
+ "ehca_mmap_fw() failed rc=%x cq_num=%x",
+ ret, cq->cq_number);
+ return ret;
}
+ break;
- if (rsrc_type == 2) {
- ehca_dbg(cq->ib_cq.device, "cq=%p cq queuearea", cq);
- offset = address - vma->vm_start;
- vaddr = ipz_qeit_calc(&cq->ipz_queue, offset);
- ehca_dbg(cq->ib_cq.device, "offset=%lx vaddr=%p",
- offset, vaddr);
- mypage = virt_to_page(vaddr);
+ case 2: /* cq queue_addr */
+ ehca_dbg(cq->ib_cq.device, "cq_num=%x queue", cq->cq_number);
+ ret = ehca_mmap_queue(vma, &cq->ipz_queue, &cq->mm_count_queue);
+ if (unlikely(ret)) {
+ ehca_err(cq->ib_cq.device,
+ "ehca_mmap_queue() failed rc=%x cq_num=%x",
+ ret, cq->cq_number);
+ return ret;
}
break;
- case 2: /* QP */
- spin_lock_irqsave(&ehca_qp_idr_lock, flags);
- qp = idr_find(&ehca_qp_idr, idr_handle);
- spin_unlock_irqrestore(&ehca_qp_idr_lock, flags);
+ default:
+ ehca_err(cq->ib_cq.device, "bad resource type=%x cq_num=%x",
+ rsrc_type, cq->cq_number);
+ return -EINVAL;
+ }
- /* make sure this mmap really belongs to the authorized user */
- if (!qp) {
- ehca_gen_err("qp is NULL ret=NOPAGE_SIGBUS");
- return NOPAGE_SIGBUS;
+ return 0;
+}
+
+static int ehca_mmap_qp(struct vm_area_struct *vma, struct ehca_qp *qp,
+ u32 rsrc_type)
+{
+ int ret;
+
+ switch (rsrc_type) {
+ case 1: /* galpa fw handle */
+ ehca_dbg(qp->ib_qp.device, "qp_num=%x fw", qp->ib_qp.qp_num);
+ ret = ehca_mmap_fw(vma, &qp->galpas, &qp->mm_count_galpa);
+ if (unlikely(ret)) {
+ ehca_err(qp->ib_qp.device,
+ "remap_pfn_range() failed ret=%x qp_num=%x",
+ ret, qp->ib_qp.qp_num);
+ return -ENOMEM;
}
+ break;
- pd = container_of(qp->ib_qp.pd, struct ehca_pd, ib_pd);
- if (pd->ownpid != cur_pid) {
+ case 2: /* qp rqueue_addr */
+ ehca_dbg(qp->ib_qp.device, "qp_num=%x rqueue",
+ qp->ib_qp.qp_num);
+ ret = ehca_mmap_queue(vma, &qp->ipz_rqueue, &qp->mm_count_rqueue);
+ if (unlikely(ret)) {
ehca_err(qp->ib_qp.device,
- "Invalid caller pid=%x ownpid=%x",
- cur_pid, pd->ownpid);
- return NOPAGE_SIGBUS;
+ "ehca_mmap_queue(rq) failed rc=%x qp_num=%x",
+ ret, qp->ib_qp.qp_num);
+ return ret;
}
+ break;
- if (rsrc_type == 2) { /* rqueue */
- ehca_dbg(qp->ib_qp.device, "qp=%p qp rqueuearea", qp);
- offset = address - vma->vm_start;
- vaddr = ipz_qeit_calc(&qp->ipz_rqueue, offset);
- ehca_dbg(qp->ib_qp.device, "offset=%lx vaddr=%p",
- offset, vaddr);
- mypage = virt_to_page(vaddr);
- } else if (rsrc_type == 3) { /* squeue */
- ehca_dbg(qp->ib_qp.device, "qp=%p qp squeuearea", qp);
- offset = address - vma->vm_start;
- vaddr = ipz_qeit_calc(&qp->ipz_squeue, offset);
- ehca_dbg(qp->ib_qp.device, "offset=%lx vaddr=%p",
- offset, vaddr);
- mypage = virt_to_page(vaddr);
+ case 3: /* qp squeue_addr */
+ ehca_dbg(qp->ib_qp.device, "qp_num=%x squeue",
+ qp->ib_qp.qp_num);
+ ret = ehca_mmap_queue(vma, &qp->ipz_squeue, &qp->mm_count_squeue);
+ if (unlikely(ret)) {
+ ehca_err(qp->ib_qp.device,
+ "ehca_mmap_queue(sq) failed rc=%x qp_num=%x",
+ ret, qp->ib_qp.qp_num);
+ return ret;
}
break;
default:
- ehca_gen_err("bad queue type %x", q_type);
- return NOPAGE_SIGBUS;
- }
-
- if (!mypage) {
- ehca_gen_err("Invalid page adr==NULL ret=NOPAGE_SIGBUS");
- return NOPAGE_SIGBUS;
+ ehca_err(qp->ib_qp.device, "bad resource type=%x qp=num=%x",
+ rsrc_type, qp->ib_qp.qp_num);
+ return -EINVAL;
}
- get_page(mypage);
- return mypage;
+ return 0;
}
-static struct vm_operations_struct ehcau_vm_ops = {
- .nopage = ehca_nopage,
-};
-
int ehca_mmap(struct ib_ucontext *context, struct vm_area_struct *vma)
{
u64 fileoffset = vma->vm_pgoff << PAGE_SHIFT;
u32 rsrc_type = (fileoffset >> 24) & 0xF; /* sq,rq,cmnd_window */
u32 cur_pid = current->tgid;
u32 ret;
- u64 vsize, physical;
unsigned long flags;
struct ehca_cq *cq;
struct ehca_qp *qp;
if (!cq->ib_cq.uobject || cq->ib_cq.uobject->context != context)
return -EINVAL;
- switch (rsrc_type) {
- case 1: /* galpa fw handle */
- ehca_dbg(cq->ib_cq.device, "cq=%p cq triggerarea", cq);
- vma->vm_flags |= VM_RESERVED;
- vsize = vma->vm_end - vma->vm_start;
- if (vsize != EHCA_PAGESIZE) {
- ehca_err(cq->ib_cq.device, "invalid vsize=%lx",
- vma->vm_end - vma->vm_start);
- return -EINVAL;
- }
-
- physical = cq->galpas.user.fw_handle;
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- vma->vm_flags |= VM_IO | VM_RESERVED;
-
- ehca_dbg(cq->ib_cq.device,
- "vsize=%lx physical=%lx", vsize, physical);
- ret = remap_pfn_range(vma, vma->vm_start,
- physical >> PAGE_SHIFT, vsize,
- vma->vm_page_prot);
- if (ret) {
- ehca_err(cq->ib_cq.device,
- "remap_pfn_range() failed ret=%x",
- ret);
- return -ENOMEM;
- }
- break;
-
- case 2: /* cq queue_addr */
- ehca_dbg(cq->ib_cq.device, "cq=%p cq q_addr", cq);
- vma->vm_flags |= VM_RESERVED;
- vma->vm_ops = &ehcau_vm_ops;
- break;
-
- default:
- ehca_err(cq->ib_cq.device, "bad resource type %x",
- rsrc_type);
- return -EINVAL;
+ ret = ehca_mmap_cq(vma, cq, rsrc_type);
+ if (unlikely(ret)) {
+ ehca_err(cq->ib_cq.device,
+ "ehca_mmap_cq() failed rc=%x cq_num=%x",
+ ret, cq->cq_number);
+ return ret;
}
break;
if (!qp->ib_qp.uobject || qp->ib_qp.uobject->context != context)
return -EINVAL;
- switch (rsrc_type) {
- case 1: /* galpa fw handle */
- ehca_dbg(qp->ib_qp.device, "qp=%p qp triggerarea", qp);
- vma->vm_flags |= VM_RESERVED;
- vsize = vma->vm_end - vma->vm_start;
- if (vsize != EHCA_PAGESIZE) {
- ehca_err(qp->ib_qp.device, "invalid vsize=%lx",
- vma->vm_end - vma->vm_start);
- return -EINVAL;
- }
-
- physical = qp->galpas.user.fw_handle;
- vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
- vma->vm_flags |= VM_IO | VM_RESERVED;
-
- ehca_dbg(qp->ib_qp.device, "vsize=%lx physical=%lx",
- vsize, physical);
- ret = remap_pfn_range(vma, vma->vm_start,
- physical >> PAGE_SHIFT, vsize,
- vma->vm_page_prot);
- if (ret) {
- ehca_err(qp->ib_qp.device,
- "remap_pfn_range() failed ret=%x",
- ret);
- return -ENOMEM;
- }
- break;
-
- case 2: /* qp rqueue_addr */
- ehca_dbg(qp->ib_qp.device, "qp=%p qp rqueue_addr", qp);
- vma->vm_flags |= VM_RESERVED;
- vma->vm_ops = &ehcau_vm_ops;
- break;
-
- case 3: /* qp squeue_addr */
- ehca_dbg(qp->ib_qp.device, "qp=%p qp squeue_addr", qp);
- vma->vm_flags |= VM_RESERVED;
- vma->vm_ops = &ehcau_vm_ops;
- break;
-
- default:
- ehca_err(qp->ib_qp.device, "bad resource type %x",
- rsrc_type);
- return -EINVAL;
+ ret = ehca_mmap_qp(vma, qp, rsrc_type);
+ if (unlikely(ret)) {
+ ehca_err(qp->ib_qp.device,
+ "ehca_mmap_qp() failed rc=%x qp_num=%x",
+ ret, qp->ib_qp.qp_num);
+ return ret;
}
break;
return 0;
}
-
-int ehca_mmap_nopage(u64 foffset, u64 length, void **mapped,
- struct vm_area_struct **vma)
-{
- down_write(¤t->mm->mmap_sem);
- *mapped = (void*)do_mmap(NULL,0, length, PROT_WRITE,
- MAP_SHARED | MAP_ANONYMOUS,
- foffset);
- up_write(¤t->mm->mmap_sem);
- if (!(*mapped)) {
- ehca_gen_err("couldn't mmap foffset=%lx length=%lx",
- foffset, length);
- return -EINVAL;
- }
-
- *vma = find_vma(current->mm, (u64)*mapped);
- if (!(*vma)) {
- down_write(¤t->mm->mmap_sem);
- do_munmap(current->mm, 0, length);
- up_write(¤t->mm->mmap_sem);
- ehca_gen_err("couldn't find vma queue=%p", *mapped);
- return -EINVAL;
- }
- (*vma)->vm_flags |= VM_RESERVED;
- (*vma)->vm_ops = &ehcau_vm_ops;
-
- return 0;
-}
-
-int ehca_mmap_register(u64 physical, void **mapped,
- struct vm_area_struct **vma)
-{
- int ret;
- unsigned long vsize;
- /* ehca hw supports only 4k page */
- ret = ehca_mmap_nopage(0, EHCA_PAGESIZE, mapped, vma);
- if (ret) {
- ehca_gen_err("could'nt mmap physical=%lx", physical);
- return ret;
- }
-
- (*vma)->vm_flags |= VM_RESERVED;
- vsize = (*vma)->vm_end - (*vma)->vm_start;
- if (vsize != EHCA_PAGESIZE) {
- ehca_gen_err("invalid vsize=%lx",
- (*vma)->vm_end - (*vma)->vm_start);
- return -EINVAL;
- }
-
- (*vma)->vm_page_prot = pgprot_noncached((*vma)->vm_page_prot);
- (*vma)->vm_flags |= VM_IO | VM_RESERVED;
-
- ret = remap_pfn_range((*vma), (*vma)->vm_start,
- physical >> PAGE_SHIFT, vsize,
- (*vma)->vm_page_prot);
- if (ret) {
- ehca_gen_err("remap_pfn_range() failed ret=%x", ret);
- return -ENOMEM;
- }
-
- return 0;
-
-}
-
-int ehca_munmap(unsigned long addr, size_t len) {
- int ret = 0;
- struct mm_struct *mm = current->mm;
- if (mm) {
- down_write(&mm->mmap_sem);
- ret = do_munmap(mm, addr, len);
- up_write(&mm->mmap_sem);
- }
- return ret;
-}
wc.vendor_err = 0;
wc.byte_len = 0;
wc.imm_data = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = 0;
wc.wc_flags = 0;
wc.pkey_index = 0;
wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc->vendor_err = 0;
wc->byte_len = 0;
- wc->qp_num = qp->ibqp.qp_num;
+ wc->qp = &qp->ibqp;
wc->src_qp = qp->remote_qpn;
wc->pkey_index = 0;
wc->slid = qp->remote_ah_attr.dlid;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc.vendor_err = 0;
wc.byte_len = wqe->length;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc.vendor_err = 0;
wc.byte_len = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
wc.vendor_err = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.vendor_err = 0;
wc.byte_len = 0;
wc.imm_data = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = 0;
wc.wc_flags = 0;
wc.pkey_index = 0;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc.vendor_err = 0;
wc.byte_len = 0;
- wc.qp_num = sqp->ibqp.qp_num;
+ wc.qp = &sqp->ibqp;
wc.src_qp = sqp->remote_qpn;
wc.pkey_index = 0;
wc.slid = sqp->remote_ah_attr.dlid;
wc.status = IB_WC_SUCCESS;
wc.vendor_err = 0;
wc.byte_len = wqe->length;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc.pkey_index = 0;
wc.opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc.vendor_err = 0;
wc.byte_len = wqe->length;
- wc.qp_num = sqp->ibqp.qp_num;
+ wc.qp = &sqp->ibqp;
wc.src_qp = 0;
wc.pkey_index = 0;
wc.slid = 0;
wc->opcode = ib_ipath_wc_opcode[wqe->wr.opcode];
wc->vendor_err = 0;
wc->byte_len = wqe->length;
- wc->qp_num = qp->ibqp.qp_num;
+ wc->qp = &qp->ibqp;
wc->src_qp = qp->remote_qpn;
wc->pkey_index = 0;
wc->slid = qp->remote_ah_attr.dlid;
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
wc.vendor_err = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = qp->remote_qpn;
wc.pkey_index = 0;
wc.slid = qp->remote_ah_attr.dlid;
wc.vendor_err = 0;
wc.byte_len = 0;
wc.imm_data = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = 0;
wc.wc_flags = 0;
wc.pkey_index = 0;
wc->status = IB_WC_SUCCESS;
wc->opcode = IB_WC_RECV;
wc->vendor_err = 0;
- wc->qp_num = qp->ibqp.qp_num;
+ wc->qp = &qp->ibqp;
wc->src_qp = sqp->ibqp.qp_num;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc->pkey_index = 0;
wc.vendor_err = 0;
wc.opcode = IB_WC_SEND;
wc.byte_len = len;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = 0;
wc.wc_flags = 0;
/* XXX initialize other fields? */
wc.status = IB_WC_SUCCESS;
wc.opcode = IB_WC_RECV;
wc.vendor_err = 0;
- wc.qp_num = qp->ibqp.qp_num;
+ wc.qp = &qp->ibqp;
wc.src_qp = src_qp;
/* XXX do we know which pkey matched? Only needed for GSI. */
wc.pkey_index = 0;
memset(inbox + 256, 0, 256);
- MTHCA_PUT(inbox, in_wc->qp_num, MAD_IFC_MY_QPN_OFFSET);
+ MTHCA_PUT(inbox, in_wc->qp->qp_num, MAD_IFC_MY_QPN_OFFSET);
MTHCA_PUT(inbox, in_wc->src_qp, MAD_IFC_RQPN_OFFSET);
val = in_wc->sl << 4;
}
}
- entry->qp_num = (*cur_qp)->qpn;
+ entry->qp = &(*cur_qp)->ibqp;
if (is_send) {
wq = &(*cur_qp)->sq;
return netdev_priv(dev);
}
-static ssize_t show_pkey(struct class_device *cdev, char *buf)
+static ssize_t show_pkey(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct ipoib_dev_priv *priv =
- netdev_priv(container_of(cdev, struct net_device, class_dev));
+ struct ipoib_dev_priv *priv = netdev_priv(to_net_dev(dev));
return sprintf(buf, "0x%04x\n", priv->pkey);
}
-static CLASS_DEVICE_ATTR(pkey, S_IRUGO, show_pkey, NULL);
+static DEVICE_ATTR(pkey, S_IRUGO, show_pkey, NULL);
-static ssize_t create_child(struct class_device *cdev,
+static ssize_t create_child(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
int pkey;
*/
pkey |= 0x8000;
- ret = ipoib_vlan_add(container_of(cdev, struct net_device, class_dev),
- pkey);
+ ret = ipoib_vlan_add(to_net_dev(dev), pkey);
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child);
+static DEVICE_ATTR(create_child, S_IWUGO, NULL, create_child);
-static ssize_t delete_child(struct class_device *cdev,
+static ssize_t delete_child(struct device *dev,
+ struct device_attribute *attr,
const char *buf, size_t count)
{
int pkey;
if (pkey < 0 || pkey > 0xffff)
return -EINVAL;
- ret = ipoib_vlan_delete(container_of(cdev, struct net_device, class_dev),
- pkey);
+ ret = ipoib_vlan_delete(to_net_dev(dev), pkey);
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child);
+static DEVICE_ATTR(delete_child, S_IWUGO, NULL, delete_child);
int ipoib_add_pkey_attr(struct net_device *dev)
{
- return class_device_create_file(&dev->class_dev,
- &class_device_attr_pkey);
+ return device_create_file(&dev->dev, &dev_attr_pkey);
}
static struct net_device *ipoib_add_port(const char *format,
if (ipoib_add_pkey_attr(priv->dev))
goto sysfs_failed;
- if (class_device_create_file(&priv->dev->class_dev,
- &class_device_attr_create_child))
+ if (device_create_file(&priv->dev->dev, &dev_attr_create_child))
goto sysfs_failed;
- if (class_device_create_file(&priv->dev->class_dev,
- &class_device_attr_delete_child))
+ if (device_create_file(&priv->dev->dev, &dev_attr_delete_child))
goto sysfs_failed;
return priv->dev;
#include "ipoib.h"
-static ssize_t show_parent(struct class_device *class_dev, char *buf)
+static ssize_t show_parent(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- struct net_device *dev =
- container_of(class_dev, struct net_device, class_dev);
+ struct net_device *dev = to_net_dev(d);
struct ipoib_dev_priv *priv = netdev_priv(dev);
return sprintf(buf, "%s\n", priv->parent->name);
}
-static CLASS_DEVICE_ATTR(parent, S_IRUGO, show_parent, NULL);
+static DEVICE_ATTR(parent, S_IRUGO, show_parent, NULL);
int ipoib_vlan_add(struct net_device *pdev, unsigned short pkey)
{
if (ipoib_add_pkey_attr(priv->dev))
goto sysfs_failed;
- if (class_device_create_file(&priv->dev->class_dev,
- &class_device_attr_parent))
+ if (device_create_file(&priv->dev->dev, &dev_attr_parent))
goto sysfs_failed;
list_add_tail(&priv->list, &ppriv->child_intfs);
target->tx_head = 0;
target->tx_tail = 0;
+ target->qp_in_error = 0;
ret = srp_connect_target(target);
if (ret)
goto err;
printk(KERN_ERR PFX "failed %s status %d\n",
wc.wr_id & SRP_OP_RECV ? "receive" : "send",
wc.status);
+ target->qp_in_error = 1;
break;
}
printk(KERN_ERR "SRP abort called\n");
+ if (target->qp_in_error)
+ return FAILED;
if (srp_find_req(target, scmnd, &req))
return FAILED;
if (srp_send_tsk_mgmt(target, req, SRP_TSK_ABORT_TASK))
printk(KERN_ERR "SRP reset_device called\n");
+ if (target->qp_in_error)
+ return FAILED;
if (srp_find_req(target, scmnd, &req))
return FAILED;
if (srp_send_tsk_mgmt(target, req, SRP_TSK_LUN_RESET))
goto err_free;
}
+ target->qp_in_error = 0;
ret = srp_connect_target(target);
if (ret) {
printk(KERN_ERR PFX "Connection failed\n");
struct completion done;
int status;
enum srp_target_state state;
+ int qp_in_error;
};
struct srp_iu {
EXPORT_SYMBOL(__serio_register_port);
EXPORT_SYMBOL(serio_unregister_port);
EXPORT_SYMBOL(serio_unregister_child_port);
-EXPORT_SYMBOL(serio_register_driver);
+EXPORT_SYMBOL(__serio_register_driver);
EXPORT_SYMBOL(serio_unregister_driver);
EXPORT_SYMBOL(serio_open);
EXPORT_SYMBOL(serio_close);
drv->driver.name, error);
}
-int serio_register_driver(struct serio_driver *drv)
+int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name)
{
int manual_bind = drv->manual_bind;
int error;
drv->driver.bus = &serio_bus;
+ drv->driver.owner = owner;
+ drv->driver.mod_name = mod_name;
/*
* Temporarily disable automatic binding because probing
{ ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
{ ZC0301_USB_DEVICE(0x055f, 0xd003, 0xff), }, /* TAS5130 */ \
{ ZC0301_USB_DEVICE(0x055f, 0xd004, 0xff), }, /* TAS5130 */ \
- { ZC0301_USB_DEVICE(0x046d, 0x08ae, 0xff), }, /* PAS202 */ \
{ ZC0301_USB_DEVICE(0x0ac8, 0x0301, 0xff), }, \
{ ZC0301_USB_DEVICE(0x0ac8, 0x301b, 0xff), }, /* PB-0330/HV7131 */ \
{ ZC0301_USB_DEVICE(0x0ac8, 0x303b, 0xff), }, /* PB-0330 */ \
To compile this driver as a module, choose M here: the module will
be called tifm_7xx1.
+config ASUS_LAPTOP
+ tristate "Asus Laptop Extras (EXPERIMENTAL)"
+ depends on X86
+ depends on ACPI
+ depends on EXPERIMENTAL && !ACPI_ASUS
+ depends on LEDS_CLASS
+ depends on BACKLIGHT_CLASS_DEVICE
+ ---help---
+ This is the new Linux driver for Asus laptops. It may also support some
+ MEDION, JVC or VICTOR laptops. It makes all the extra buttons generate
+ standard ACPI events that go through /proc/acpi/events. It also adds
+ support for video output switching, LCD backlight control, Bluetooth and
+ Wlan control, and most importantly, allows you to blink those fancy LEDs.
+
+ For more information and a userspace daemon for handling the extra
+ buttons see <http://acpi4asus.sf.net/>.
+
+ If you have an ACPI-compatible ASUS laptop, say Y or M here.
+
config MSI_LAPTOP
tristate "MSI Laptop Extras"
depends on X86
obj-$(CONFIG_IBM_ASM) += ibmasm/
obj-$(CONFIG_HDPU_FEATURES) += hdpuftrs/
obj-$(CONFIG_MSI_LAPTOP) += msi-laptop.o
+obj-$(CONFIG_ASUS_LAPTOP) += asus-laptop.o
obj-$(CONFIG_LKDTM) += lkdtm.o
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
--- /dev/null
+/*
+ * asus-laptop.c - Asus Laptop Support
+ *
+ *
+ * Copyright (C) 2002-2005 Julien Lerouge, 2003-2006 Karol Kozimor
+ * Copyright (C) 2006 Corentin Chary
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ *
+ * The development page for this driver is located at
+ * http://sourceforge.net/projects/acpi4asus/
+ *
+ * Credits:
+ * Pontus Fuchs - Helper functions, cleanup
+ * Johann Wiesner - Small compile fixes
+ * John Belmonte - ACPI code for Toshiba laptop was a good starting point.
+ * Eric Burghard - LED display support for W1N
+ * Josh Green - Light Sens support
+ * Thomas Tuttle - His first patch for led support was very helpfull
+ *
+ */
+
+#include <linux/autoconf.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/err.h>
+#include <linux/proc_fs.h>
+#include <linux/backlight.h>
+#include <linux/fb.h>
+#include <linux/leds.h>
+#include <linux/platform_device.h>
+#include <acpi/acpi_drivers.h>
+#include <acpi/acpi_bus.h>
+#include <asm/uaccess.h>
+
+#define ASUS_LAPTOP_VERSION "0.40"
+
+#define ASUS_HOTK_NAME "Asus Laptop Support"
+#define ASUS_HOTK_CLASS "hotkey"
+#define ASUS_HOTK_DEVICE_NAME "Hotkey"
+#define ASUS_HOTK_HID "ATK0100"
+#define ASUS_HOTK_FILE "asus-laptop"
+#define ASUS_HOTK_PREFIX "\\_SB.ATKD."
+
+/*
+ * Some events we use, same for all Asus
+ */
+#define ATKD_BR_UP 0x10
+#define ATKD_BR_DOWN 0x20
+#define ATKD_LCD_ON 0x33
+#define ATKD_LCD_OFF 0x34
+
+/*
+ * Known bits returned by \_SB.ATKD.HWRS
+ */
+#define WL_HWRS 0x80
+#define BT_HWRS 0x100
+
+/*
+ * Flags for hotk status
+ * WL_ON and BT_ON are also used for wireless_status()
+ */
+#define WL_ON 0x01 //internal Wifi
+#define BT_ON 0x02 //internal Bluetooth
+#define MLED_ON 0x04 //mail LED
+#define TLED_ON 0x08 //touchpad LED
+#define RLED_ON 0x10 //Record LED
+#define PLED_ON 0x20 //Phone LED
+#define LCD_ON 0x40 //LCD backlight
+
+#define ASUS_LOG ASUS_HOTK_FILE ": "
+#define ASUS_ERR KERN_ERR ASUS_LOG
+#define ASUS_WARNING KERN_WARNING ASUS_LOG
+#define ASUS_NOTICE KERN_NOTICE ASUS_LOG
+#define ASUS_INFO KERN_INFO ASUS_LOG
+#define ASUS_DEBUG KERN_DEBUG ASUS_LOG
+
+MODULE_AUTHOR("Julien Lerouge, Karol Kozimor, Corentin Chary");
+MODULE_DESCRIPTION(ASUS_HOTK_NAME);
+MODULE_LICENSE("GPL");
+
+#define ASUS_HANDLE(object, paths...) \
+ static acpi_handle object##_handle = NULL; \
+ static char *object##_paths[] = { paths }
+
+/* LED */
+ASUS_HANDLE(mled_set, ASUS_HOTK_PREFIX "MLED");
+ASUS_HANDLE(tled_set, ASUS_HOTK_PREFIX "TLED");
+ASUS_HANDLE(rled_set, ASUS_HOTK_PREFIX "RLED"); /* W1JC */
+ASUS_HANDLE(pled_set, ASUS_HOTK_PREFIX "PLED"); /* A7J */
+
+/* LEDD */
+ASUS_HANDLE(ledd_set, ASUS_HOTK_PREFIX "SLCM");
+
+/* Bluetooth and WLAN
+ * WLED and BLED are not handled like other XLED, because in some dsdt
+ * they also control the WLAN/Bluetooth device.
+ */
+ASUS_HANDLE(wl_switch, ASUS_HOTK_PREFIX "WLED");
+ASUS_HANDLE(bt_switch, ASUS_HOTK_PREFIX "BLED");
+ASUS_HANDLE(wireless_status, ASUS_HOTK_PREFIX "RSTS"); /* All new models */
+
+/* Brightness */
+ASUS_HANDLE(brightness_set, ASUS_HOTK_PREFIX "SPLV");
+ASUS_HANDLE(brightness_get, ASUS_HOTK_PREFIX "GPLV");
+
+/* Backlight */
+ASUS_HANDLE(lcd_switch, "\\_SB.PCI0.SBRG.EC0._Q10", /* All new models */
+ "\\_SB.PCI0.ISA.EC0._Q10", /* A1x */
+ "\\_SB.PCI0.PX40.ECD0._Q10", /* L3C */
+ "\\_SB.PCI0.PX40.EC0.Q10", /* M1A */
+ "\\_SB.PCI0.LPCB.EC0._Q10", /* P30 */
+ "\\_SB.PCI0.PX40.Q10", /* S1x */
+ "\\Q10"); /* A2x, L2D, L3D, M2E */
+
+/* Display */
+ASUS_HANDLE(display_set, ASUS_HOTK_PREFIX "SDSP");
+ASUS_HANDLE(display_get, "\\_SB.PCI0.P0P1.VGA.GETD", /* A6B, A6K A6R A7D F3JM L4R M6R A3G
+ M6A M6V VX-1 V6J V6V W3Z */
+ "\\_SB.PCI0.P0P2.VGA.GETD", /* A3E A4K, A4D A4L A6J A7J A8J Z71V M9V
+ S5A M5A z33A W1Jc W2V */
+ "\\_SB.PCI0.P0P3.VGA.GETD", /* A6V A6Q */
+ "\\_SB.PCI0.P0PA.VGA.GETD", /* A6T, A6M */
+ "\\_SB.PCI0.PCI1.VGAC.NMAP", /* L3C */
+ "\\_SB.PCI0.VGA.GETD", /* Z96F */
+ "\\ACTD", /* A2D */
+ "\\ADVG", /* A4G Z71A W1N W5A W5F M2N M3N M5N M6N S1N S5N */
+ "\\DNXT", /* P30 */
+ "\\INFB", /* A2H D1 L2D L3D L3H L2E L5D L5C M1A M2E L4L W3V */
+ "\\SSTE"); /* A3F A6F A3N A3L M6N W3N W6A */
+
+ASUS_HANDLE(ls_switch, ASUS_HOTK_PREFIX "ALSC"); /* Z71A Z71V */
+ASUS_HANDLE(ls_level, ASUS_HOTK_PREFIX "ALSL"); /* Z71A Z71V */
+
+/*
+ * This is the main structure, we can use it to store anything interesting
+ * about the hotk device
+ */
+struct asus_hotk {
+ char *name; //laptop name
+ struct acpi_device *device; //the device we are in
+ acpi_handle handle; //the handle of the hotk device
+ char status; //status of the hotk, for LEDs, ...
+ u32 ledd_status; //status of the LED display
+ u8 light_level; //light sensor level
+ u8 light_switch; //light sensor switch value
+ u16 event_count[128]; //count for each event TODO make this better
+};
+
+/*
+ * This header is made available to allow proper configuration given model,
+ * revision number , ... this info cannot go in struct asus_hotk because it is
+ * available before the hotk
+ */
+static struct acpi_table_header *asus_info;
+
+/* The actual device the driver binds to */
+static struct asus_hotk *hotk;
+
+/*
+ * The hotkey driver declaration
+ */
+static int asus_hotk_add(struct acpi_device *device);
+static int asus_hotk_remove(struct acpi_device *device, int type);
+static struct acpi_driver asus_hotk_driver = {
+ .name = ASUS_HOTK_NAME,
+ .class = ASUS_HOTK_CLASS,
+ .ids = ASUS_HOTK_HID,
+ .ops = {
+ .add = asus_hotk_add,
+ .remove = asus_hotk_remove,
+ },
+};
+
+/* The backlight device /sys/class/backlight */
+static struct backlight_device *asus_backlight_device;
+
+/*
+ * The backlight class declaration
+ */
+static int read_brightness(struct backlight_device *bd);
+static int update_bl_status(struct backlight_device *bd);
+static struct backlight_properties asusbl_data = {
+ .owner = THIS_MODULE,
+ .get_brightness = read_brightness,
+ .update_status = update_bl_status,
+ .max_brightness = 15,
+};
+
+/* These functions actually update the LED's, and are called from a
+ * workqueue. By doing this as separate work rather than when the LED
+ * subsystem asks, we avoid messing with the Asus ACPI stuff during a
+ * potentially bad time, such as a timer interrupt. */
+static struct workqueue_struct *led_workqueue;
+
+#define ASUS_LED(object, ledname) \
+ static void object##_led_set(struct led_classdev *led_cdev, \
+ enum led_brightness value); \
+ static void object##_led_update(struct work_struct *ignored); \
+ static int object##_led_wk; \
+ DECLARE_WORK(object##_led_work, object##_led_update); \
+ static struct led_classdev object##_led = { \
+ .name = "asus:" ledname, \
+ .brightness_set = object##_led_set, \
+ }
+
+ASUS_LED(mled, "mail");
+ASUS_LED(tled, "touchpad");
+ASUS_LED(rled, "record");
+ASUS_LED(pled, "phone");
+
+/*
+ * This function evaluates an ACPI method, given an int as parameter, the
+ * method is searched within the scope of the handle, can be NULL. The output
+ * of the method is written is output, which can also be NULL
+ *
+ * returns 1 if write is successful, 0 else.
+ */
+static int write_acpi_int(acpi_handle handle, const char *method, int val,
+ struct acpi_buffer *output)
+{
+ struct acpi_object_list params; //list of input parameters (an int here)
+ union acpi_object in_obj; //the only param we use
+ acpi_status status;
+
+ params.count = 1;
+ params.pointer = &in_obj;
+ in_obj.type = ACPI_TYPE_INTEGER;
+ in_obj.integer.value = val;
+
+ status = acpi_evaluate_object(handle, (char *)method, ¶ms, output);
+ return (status == AE_OK);
+}
+
+static int read_acpi_int(acpi_handle handle, const char *method, int *val,
+ struct acpi_object_list *params)
+{
+ struct acpi_buffer output;
+ union acpi_object out_obj;
+ acpi_status status;
+
+ output.length = sizeof(out_obj);
+ output.pointer = &out_obj;
+
+ status = acpi_evaluate_object(handle, (char *)method, params, &output);
+ *val = out_obj.integer.value;
+ return (status == AE_OK) && (out_obj.type == ACPI_TYPE_INTEGER);
+}
+
+static int read_wireless_status(int mask)
+{
+ int status;
+
+ if (!wireless_status_handle)
+ return (hotk->status & mask) ? 1 : 0;
+
+ if (read_acpi_int(wireless_status_handle, NULL, &status, NULL)) {
+ return (status & mask) ? 1 : 0;
+ } else
+ printk(ASUS_WARNING "Error reading Wireless status\n");
+
+ return (hotk->status & mask) ? 1 : 0;
+}
+
+/* Generic LED functions */
+static int read_status(int mask)
+{
+ /* There is a special method for both wireless devices */
+ if (mask == BT_ON || mask == WL_ON)
+ return read_wireless_status(mask);
+
+ return (hotk->status & mask) ? 1 : 0;
+}
+
+static void write_status(acpi_handle handle, int out, int mask, int invert)
+{
+ hotk->status = (out) ? (hotk->status | mask) : (hotk->status & ~mask);
+
+ if (invert) /* invert target value */
+ out = !out & 0x1;
+
+ if (handle && !write_acpi_int(handle, NULL, out, NULL))
+ printk(ASUS_WARNING " write failed\n");
+}
+
+/* /sys/class/led handlers */
+#define ASUS_LED_HANDLER(object, mask, invert) \
+ static void object##_led_set(struct led_classdev *led_cdev, \
+ enum led_brightness value) \
+ { \
+ object##_led_wk = value; \
+ queue_work(led_workqueue, &object##_led_work); \
+ } \
+ static void object##_led_update(struct work_struct *ignored) \
+ { \
+ int value = object##_led_wk; \
+ write_status(object##_set_handle, value, (mask), (invert)); \
+ }
+
+ASUS_LED_HANDLER(mled, MLED_ON, 1);
+ASUS_LED_HANDLER(pled, PLED_ON, 0);
+ASUS_LED_HANDLER(rled, RLED_ON, 0);
+ASUS_LED_HANDLER(tled, TLED_ON, 0);
+
+static int get_lcd_state(void)
+{
+ return read_status(LCD_ON);
+}
+
+static int set_lcd_state(int value)
+{
+ int lcd = 0;
+ acpi_status status = 0;
+
+ lcd = value ? 1 : 0;
+
+ if (lcd == get_lcd_state())
+ return 0;
+
+ if (lcd_switch_handle) {
+ status = acpi_evaluate_object(lcd_switch_handle,
+ NULL, NULL, NULL);
+
+ if (ACPI_FAILURE(status))
+ printk(ASUS_WARNING "Error switching LCD\n");
+ }
+
+ write_status(NULL, lcd, LCD_ON, 0);
+ return 0;
+}
+
+static void lcd_blank(int blank)
+{
+ struct backlight_device *bd = asus_backlight_device;
+
+ if (bd) {
+ down(&bd->sem);
+ if (likely(bd->props)) {
+ bd->props->power = blank;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
+ }
+ up(&bd->sem);
+ }
+}
+
+static int read_brightness(struct backlight_device *bd)
+{
+ int value;
+
+ if (!read_acpi_int(brightness_get_handle, NULL, &value, NULL))
+ printk(ASUS_WARNING "Error reading brightness\n");
+
+ return value;
+}
+
+static int set_brightness(struct backlight_device *bd, int value)
+{
+ int ret = 0;
+
+ value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+ /* 0 <= value <= 15 */
+
+ if (!write_acpi_int(brightness_set_handle, NULL, value, NULL)) {
+ printk(ASUS_WARNING "Error changing brightness\n");
+ ret = -EIO;
+ }
+
+ return ret;
+}
+
+static int update_bl_status(struct backlight_device *bd)
+{
+ int rv;
+ int value = bd->props->brightness;
+
+ rv = set_brightness(bd, value);
+ if (rv)
+ return rv;
+
+ value = (bd->props->power == FB_BLANK_UNBLANK) ? 1 : 0;
+ return set_lcd_state(value);
+}
+
+/*
+ * Platform device handlers
+ */
+
+/*
+ * We write our info in page, we begin at offset off and cannot write more
+ * than count bytes. We set eof to 1 if we handle those 2 values. We return the
+ * number of bytes written in page
+ */
+static ssize_t show_infos(struct device *dev,
+ struct device_attribute *attr, char *page)
+{
+ int len = 0;
+ int temp;
+ char buf[16]; //enough for all info
+ /*
+ * We use the easy way, we don't care of off and count, so we don't set eof
+ * to 1
+ */
+
+ len += sprintf(page, ASUS_HOTK_NAME " " ASUS_LAPTOP_VERSION "\n");
+ len += sprintf(page + len, "Model reference : %s\n", hotk->name);
+ /*
+ * The SFUN method probably allows the original driver to get the list
+ * of features supported by a given model. For now, 0x0100 or 0x0800
+ * bit signifies that the laptop is equipped with a Wi-Fi MiniPCI card.
+ * The significance of others is yet to be found.
+ */
+ if (read_acpi_int(hotk->handle, "SFUN", &temp, NULL))
+ len +=
+ sprintf(page + len, "SFUN value : 0x%04x\n", temp);
+ /*
+ * Another value for userspace: the ASYM method returns 0x02 for
+ * battery low and 0x04 for battery critical, its readings tend to be
+ * more accurate than those provided by _BST.
+ * Note: since not all the laptops provide this method, errors are
+ * silently ignored.
+ */
+ if (read_acpi_int(hotk->handle, "ASYM", &temp, NULL))
+ len +=
+ sprintf(page + len, "ASYM value : 0x%04x\n", temp);
+ if (asus_info) {
+ snprintf(buf, 16, "%d", asus_info->length);
+ len += sprintf(page + len, "DSDT length : %s\n", buf);
+ snprintf(buf, 16, "%d", asus_info->checksum);
+ len += sprintf(page + len, "DSDT checksum : %s\n", buf);
+ snprintf(buf, 16, "%d", asus_info->revision);
+ len += sprintf(page + len, "DSDT revision : %s\n", buf);
+ snprintf(buf, 7, "%s", asus_info->oem_id);
+ len += sprintf(page + len, "OEM id : %s\n", buf);
+ snprintf(buf, 9, "%s", asus_info->oem_table_id);
+ len += sprintf(page + len, "OEM table id : %s\n", buf);
+ snprintf(buf, 16, "%x", asus_info->oem_revision);
+ len += sprintf(page + len, "OEM revision : 0x%s\n", buf);
+ snprintf(buf, 5, "%s", asus_info->asl_compiler_id);
+ len += sprintf(page + len, "ASL comp vendor id : %s\n", buf);
+ snprintf(buf, 16, "%x", asus_info->asl_compiler_revision);
+ len += sprintf(page + len, "ASL comp revision : 0x%s\n", buf);
+ }
+
+ return len;
+}
+
+static int parse_arg(const char *buf, unsigned long count, int *val)
+{
+ if (!count)
+ return 0;
+ if (count > 31)
+ return -EINVAL;
+ if (sscanf(buf, "%i", val) != 1)
+ return -EINVAL;
+ return count;
+}
+
+static ssize_t store_status(const char *buf, size_t count,
+ acpi_handle handle, int mask, int invert)
+{
+ int rv, value;
+ int out = 0;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ out = value ? 1 : 0;
+
+ write_status(handle, out, mask, invert);
+
+ return rv;
+}
+
+/*
+ * LEDD display
+ */
+static ssize_t show_ledd(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "0x%08x\n", hotk->ledd_status);
+}
+
+static ssize_t store_ledd(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0) {
+ if (!write_acpi_int(ledd_set_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "LED display write failed\n");
+ else
+ hotk->ledd_status = (u32) value;
+ }
+ return rv;
+}
+
+/*
+ * WLAN
+ */
+static ssize_t show_wlan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(WL_ON));
+}
+
+static ssize_t store_wlan(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return store_status(buf, count, wl_switch_handle, WL_ON, 0);
+}
+
+/*
+ * Bluetooth
+ */
+static ssize_t show_bluetooth(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_status(BT_ON));
+}
+
+static ssize_t store_bluetooth(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ return store_status(buf, count, bt_switch_handle, BT_ON, 0);
+}
+
+/*
+ * Display
+ */
+static void set_display(int value)
+{
+ /* no sanity check needed for now */
+ if (!write_acpi_int(display_set_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting display\n");
+ return;
+}
+
+static int read_display(void)
+{
+ int value = 0;
+
+ /* In most of the case, we know how to set the display, but sometime
+ we can't read it */
+ if (display_get_handle) {
+ if (!read_acpi_int(display_get_handle, NULL, &value, NULL))
+ printk(ASUS_WARNING "Error reading display status\n");
+ }
+
+ value &= 0x0F; /* needed for some models, shouldn't hurt others */
+
+ return value;
+}
+
+/*
+ * Now, *this* one could be more user-friendly, but so far, no-one has
+ * complained. The significance of bits is the same as in store_disp()
+ */
+static ssize_t show_disp(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", read_display());
+}
+
+/*
+ * Experimental support for display switching. As of now: 1 should activate
+ * the LCD output, 2 should do for CRT, 4 for TV-Out and 8 for DVI.
+ * Any combination (bitwise) of these will suffice. I never actually tested 4
+ * displays hooked up simultaneously, so be warned. See the acpi4asus README
+ * for more info.
+ */
+static ssize_t store_disp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set_display(value);
+ return rv;
+}
+
+/*
+ * Light Sens
+ */
+static void set_light_sens_switch(int value)
+{
+ if (!write_acpi_int(ls_switch_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting light sensor switch\n");
+ hotk->light_switch = value;
+}
+
+static ssize_t show_lssw(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", hotk->light_switch);
+}
+
+static ssize_t store_lssw(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0)
+ set_light_sens_switch(value ? 1 : 0);
+
+ return rv;
+}
+
+static void set_light_sens_level(int value)
+{
+ if (!write_acpi_int(ls_level_handle, NULL, value, NULL))
+ printk(ASUS_WARNING "Error setting light sensor level\n");
+ hotk->light_level = value;
+}
+
+static ssize_t show_lslvl(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return sprintf(buf, "%d\n", hotk->light_level);
+}
+
+static ssize_t store_lslvl(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int rv, value;
+
+ rv = parse_arg(buf, count, &value);
+ if (rv > 0) {
+ value = (0 < value) ? ((15 < value) ? 15 : value) : 0;
+ /* 0 <= value <= 15 */
+ set_light_sens_level(value);
+ }
+
+ return rv;
+}
+
+static void asus_hotk_notify(acpi_handle handle, u32 event, void *data)
+{
+ /* TODO Find a better way to handle events count. */
+ if (!hotk)
+ return;
+
+ /*
+ * We need to tell the backlight device when the backlight power is
+ * switched
+ */
+ if (event == ATKD_LCD_ON) {
+ write_status(NULL, 1, LCD_ON, 0);
+ lcd_blank(FB_BLANK_UNBLANK);
+ } else if (event == ATKD_LCD_OFF) {
+ write_status(NULL, 0, LCD_ON, 0);
+ lcd_blank(FB_BLANK_POWERDOWN);
+ }
+
+ acpi_bus_generate_event(hotk->device, event,
+ hotk->event_count[event % 128]++);
+
+ return;
+}
+
+#define ASUS_CREATE_DEVICE_ATTR(_name) \
+ struct device_attribute dev_attr_##_name = { \
+ .attr = { \
+ .name = __stringify(_name), \
+ .mode = 0, \
+ .owner = THIS_MODULE }, \
+ .show = NULL, \
+ .store = NULL, \
+ }
+
+#define ASUS_SET_DEVICE_ATTR(_name, _mode, _show, _store) \
+ do { \
+ dev_attr_##_name.attr.mode = _mode; \
+ dev_attr_##_name.show = _show; \
+ dev_attr_##_name.store = _store; \
+ } while(0)
+
+static ASUS_CREATE_DEVICE_ATTR(infos);
+static ASUS_CREATE_DEVICE_ATTR(wlan);
+static ASUS_CREATE_DEVICE_ATTR(bluetooth);
+static ASUS_CREATE_DEVICE_ATTR(display);
+static ASUS_CREATE_DEVICE_ATTR(ledd);
+static ASUS_CREATE_DEVICE_ATTR(ls_switch);
+static ASUS_CREATE_DEVICE_ATTR(ls_level);
+
+static struct attribute *asuspf_attributes[] = {
+ &dev_attr_infos.attr,
+ &dev_attr_wlan.attr,
+ &dev_attr_bluetooth.attr,
+ &dev_attr_display.attr,
+ &dev_attr_ledd.attr,
+ &dev_attr_ls_switch.attr,
+ &dev_attr_ls_level.attr,
+ NULL
+};
+
+static struct attribute_group asuspf_attribute_group = {
+ .attrs = asuspf_attributes
+};
+
+static struct platform_driver asuspf_driver = {
+ .driver = {
+ .name = ASUS_HOTK_FILE,
+ .owner = THIS_MODULE,
+ }
+};
+
+static struct platform_device *asuspf_device;
+
+static void asus_hotk_add_fs(void)
+{
+ ASUS_SET_DEVICE_ATTR(infos, 0444, show_infos, NULL);
+
+ if (wl_switch_handle)
+ ASUS_SET_DEVICE_ATTR(wlan, 0644, show_wlan, store_wlan);
+
+ if (bt_switch_handle)
+ ASUS_SET_DEVICE_ATTR(bluetooth, 0644,
+ show_bluetooth, store_bluetooth);
+
+ if (display_set_handle && display_get_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0644, show_disp, store_disp);
+ else if (display_set_handle)
+ ASUS_SET_DEVICE_ATTR(display, 0200, NULL, store_disp);
+
+ if (ledd_set_handle)
+ ASUS_SET_DEVICE_ATTR(ledd, 0644, show_ledd, store_ledd);
+
+ if (ls_switch_handle && ls_level_handle) {
+ ASUS_SET_DEVICE_ATTR(ls_level, 0644, show_lslvl, store_lslvl);
+ ASUS_SET_DEVICE_ATTR(ls_switch, 0644, show_lssw, store_lssw);
+ }
+}
+
+static int asus_handle_init(char *name, acpi_handle * handle,
+ char **paths, int num_paths)
+{
+ int i;
+ acpi_status status;
+
+ for (i = 0; i < num_paths; i++) {
+ status = acpi_get_handle(NULL, paths[i], handle);
+ if (ACPI_SUCCESS(status))
+ return 0;
+ }
+
+ *handle = NULL;
+ return -ENODEV;
+}
+
+#define ASUS_HANDLE_INIT(object) \
+ asus_handle_init(#object, &object##_handle, object##_paths, \
+ ARRAY_SIZE(object##_paths))
+
+/*
+ * This function is used to initialize the hotk with right values. In this
+ * method, we can make all the detection we want, and modify the hotk struct
+ */
+static int asus_hotk_get_info(void)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *model = NULL;
+ int bsts_result, hwrs_result;
+ char *string = NULL;
+ acpi_status status;
+
+ /*
+ * Get DSDT headers early enough to allow for differentiating between
+ * models, but late enough to allow acpi_bus_register_driver() to fail
+ * before doing anything ACPI-specific. Should we encounter a machine,
+ * which needs special handling (i.e. its hotkey device has a different
+ * HID), this bit will be moved. A global variable asus_info contains
+ * the DSDT header.
+ */
+ status = acpi_get_table(ACPI_SIG_DSDT, 1, &asus_info);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_WARNING "Couldn't get the DSDT table header\n");
+
+ /* We have to write 0 on init this far for all ASUS models */
+ if (!write_acpi_int(hotk->handle, "INIT", 0, &buffer)) {
+ printk(ASUS_ERR "Hotkey initialization failed\n");
+ return -ENODEV;
+ }
+
+ /* This needs to be called for some laptops to init properly */
+ if (!read_acpi_int(hotk->handle, "BSTS", &bsts_result, NULL))
+ printk(ASUS_WARNING "Error calling BSTS\n");
+ else if (bsts_result)
+ printk(ASUS_NOTICE "BSTS called, 0x%02x returned\n",
+ bsts_result);
+
+ /*
+ * Try to match the object returned by INIT to the specific model.
+ * Handle every possible object (or the lack of thereof) the DSDT
+ * writers might throw at us. When in trouble, we pass NULL to
+ * asus_model_match() and try something completely different.
+ */
+ if (buffer.pointer) {
+ model = buffer.pointer;
+ switch (model->type) {
+ case ACPI_TYPE_STRING:
+ string = model->string.pointer;
+ break;
+ case ACPI_TYPE_BUFFER:
+ string = model->buffer.pointer;
+ break;
+ default:
+ string = "";
+ break;
+ }
+ }
+ hotk->name = kstrdup(string, GFP_KERNEL);
+ if (!hotk->name)
+ return -ENOMEM;
+
+ if (*string)
+ printk(ASUS_NOTICE " %s model detected\n", string);
+
+ ASUS_HANDLE_INIT(mled_set);
+ ASUS_HANDLE_INIT(tled_set);
+ ASUS_HANDLE_INIT(rled_set);
+ ASUS_HANDLE_INIT(pled_set);
+
+ ASUS_HANDLE_INIT(ledd_set);
+
+ /*
+ * The HWRS method return informations about the hardware.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * The significance of others is yet to be found.
+ * If we don't find the method, we assume the device are present.
+ */
+ if (!read_acpi_int(hotk->handle, "HRWS", &hwrs_result, NULL))
+ hwrs_result = WL_HWRS | BT_HWRS;
+
+ if (hwrs_result & WL_HWRS)
+ ASUS_HANDLE_INIT(wl_switch);
+ if (hwrs_result & BT_HWRS)
+ ASUS_HANDLE_INIT(bt_switch);
+
+ ASUS_HANDLE_INIT(wireless_status);
+
+ ASUS_HANDLE_INIT(brightness_set);
+ ASUS_HANDLE_INIT(brightness_get);
+
+ ASUS_HANDLE_INIT(lcd_switch);
+
+ ASUS_HANDLE_INIT(display_set);
+ ASUS_HANDLE_INIT(display_get);
+
+ /* There is a lot of models with "ALSL", but a few get
+ a real light sens, so we need to check it. */
+ if (ASUS_HANDLE_INIT(ls_switch))
+ ASUS_HANDLE_INIT(ls_level);
+
+ kfree(model);
+
+ return AE_OK;
+}
+
+static int asus_hotk_check(void)
+{
+ int result = 0;
+
+ result = acpi_bus_get_status(hotk->device);
+ if (result)
+ return result;
+
+ if (hotk->device->status.present) {
+ result = asus_hotk_get_info();
+ } else {
+ printk(ASUS_ERR "Hotkey device not present, aborting\n");
+ return -EINVAL;
+ }
+
+ return result;
+}
+
+static int asus_hotk_found;
+
+static int asus_hotk_add(struct acpi_device *device)
+{
+ acpi_status status = AE_OK;
+ int result;
+
+ if (!device)
+ return -EINVAL;
+
+ printk(ASUS_NOTICE "Asus Laptop Support version %s\n",
+ ASUS_LAPTOP_VERSION);
+
+ hotk = kmalloc(sizeof(struct asus_hotk), GFP_KERNEL);
+ if (!hotk)
+ return -ENOMEM;
+ memset(hotk, 0, sizeof(struct asus_hotk));
+
+ hotk->handle = device->handle;
+ strcpy(acpi_device_name(device), ASUS_HOTK_DEVICE_NAME);
+ strcpy(acpi_device_class(device), ASUS_HOTK_CLASS);
+ acpi_driver_data(device) = hotk;
+ hotk->device = device;
+
+ result = asus_hotk_check();
+ if (result)
+ goto end;
+
+ asus_hotk_add_fs();
+
+ /*
+ * We install the handler, it will receive the hotk in parameter, so, we
+ * could add other data to the hotk struct
+ */
+ status = acpi_install_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
+ asus_hotk_notify, hotk);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_ERR "Error installing notify handler\n");
+
+ asus_hotk_found = 1;
+
+ /* WLED and BLED are on by default */
+ write_status(bt_switch_handle, 1, BT_ON, 0);
+ write_status(wl_switch_handle, 1, WL_ON, 0);
+
+ /* LCD Backlight is on by default */
+ write_status(NULL, 1, LCD_ON, 0);
+
+ /* LED display is off by default */
+ hotk->ledd_status = 0xFFF;
+
+ /* Set initial values of light sensor and level */
+ hotk->light_switch = 1; /* Default to light sensor disabled */
+ hotk->light_level = 0; /* level 5 for sensor sensitivity */
+
+ if (ls_switch_handle)
+ set_light_sens_switch(hotk->light_switch);
+
+ if (ls_level_handle)
+ set_light_sens_level(hotk->light_level);
+
+ end:
+ if (result) {
+ kfree(hotk->name);
+ kfree(hotk);
+ }
+
+ return result;
+}
+
+static int asus_hotk_remove(struct acpi_device *device, int type)
+{
+ acpi_status status = 0;
+
+ if (!device || !acpi_driver_data(device))
+ return -EINVAL;
+
+ status = acpi_remove_notify_handler(hotk->handle, ACPI_SYSTEM_NOTIFY,
+ asus_hotk_notify);
+ if (ACPI_FAILURE(status))
+ printk(ASUS_ERR "Error removing notify handler\n");
+
+ kfree(hotk->name);
+ kfree(hotk);
+
+ return 0;
+}
+
+static void asus_backlight_exit(void)
+{
+ if (asus_backlight_device)
+ backlight_device_unregister(asus_backlight_device);
+}
+
+#define ASUS_LED_UNREGISTER(object) \
+ if(object##_led.class_dev \
+ && !IS_ERR(object##_led.class_dev)) \
+ led_classdev_unregister(&object##_led)
+
+static void asus_led_exit(void)
+{
+ ASUS_LED_UNREGISTER(mled);
+ ASUS_LED_UNREGISTER(tled);
+ ASUS_LED_UNREGISTER(pled);
+ ASUS_LED_UNREGISTER(rled);
+
+ destroy_workqueue(led_workqueue);
+}
+
+static void __exit asus_laptop_exit(void)
+{
+ asus_backlight_exit();
+ asus_led_exit();
+
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ sysfs_remove_group(&asuspf_device->dev.kobj, &asuspf_attribute_group);
+ platform_device_unregister(asuspf_device);
+ platform_driver_unregister(&asuspf_driver);
+}
+
+static int asus_backlight_init(struct device *dev)
+{
+ struct backlight_device *bd;
+
+ if (brightness_set_handle && lcd_switch_handle) {
+ bd = backlight_device_register(ASUS_HOTK_FILE, dev,
+ NULL, &asusbl_data);
+ if (IS_ERR(bd)) {
+ printk(ASUS_ERR
+ "Could not register asus backlight device\n");
+ asus_backlight_device = NULL;
+ return PTR_ERR(bd);
+ }
+
+ asus_backlight_device = bd;
+
+ down(&bd->sem);
+ if (likely(bd->props)) {
+ bd->props->brightness = read_brightness(NULL);
+ bd->props->power = FB_BLANK_UNBLANK;
+ if (likely(bd->props->update_status))
+ bd->props->update_status(bd);
+ }
+ up(&bd->sem);
+ }
+ return 0;
+}
+
+static int asus_led_register(acpi_handle handle,
+ struct led_classdev *ldev, struct device *dev)
+{
+ if (!handle)
+ return 0;
+
+ return led_classdev_register(dev, ldev);
+}
+
+#define ASUS_LED_REGISTER(object, device) \
+ asus_led_register(object##_set_handle, &object##_led, device)
+
+static int asus_led_init(struct device *dev)
+{
+ int rv;
+
+ rv = ASUS_LED_REGISTER(mled, dev);
+ if (rv)
+ return rv;
+
+ rv = ASUS_LED_REGISTER(tled, dev);
+ if (rv)
+ return rv;
+
+ rv = ASUS_LED_REGISTER(rled, dev);
+ if (rv)
+ return rv;
+
+ rv = ASUS_LED_REGISTER(pled, dev);
+ if (rv)
+ return rv;
+
+ led_workqueue = create_singlethread_workqueue("led_workqueue");
+ if (!led_workqueue)
+ return -ENOMEM;
+
+ return 0;
+}
+
+static int __init asus_laptop_init(void)
+{
+ struct device *dev;
+ int result;
+
+ if (acpi_disabled)
+ return -ENODEV;
+
+ if (!acpi_specific_hotkey_enabled) {
+ printk(ASUS_ERR "Using generic hotkey driver\n");
+ return -ENODEV;
+ }
+
+ result = acpi_bus_register_driver(&asus_hotk_driver);
+ if (result < 0)
+ return result;
+
+ /*
+ * This is a bit of a kludge. We only want this module loaded
+ * for ASUS systems, but there's currently no way to probe the
+ * ACPI namespace for ASUS HIDs. So we just return failure if
+ * we didn't find one, which will cause the module to be
+ * unloaded.
+ */
+ if (!asus_hotk_found) {
+ acpi_bus_unregister_driver(&asus_hotk_driver);
+ return -ENODEV;
+ }
+
+ dev = acpi_get_physical_device(hotk->device->handle);
+
+ result = asus_backlight_init(dev);
+ if (result)
+ goto fail_backlight;
+
+ result = asus_led_init(dev);
+ if (result)
+ goto fail_led;
+
+ /* Register platform stuff */
+ result = platform_driver_register(&asuspf_driver);
+ if (result)
+ goto fail_platform_driver;
+
+ asuspf_device = platform_device_alloc(ASUS_HOTK_FILE, -1);
+ if (!asuspf_device) {
+ result = -ENOMEM;
+ goto fail_platform_device1;
+ }
+
+ result = platform_device_add(asuspf_device);
+ if (result)
+ goto fail_platform_device2;
+
+ result = sysfs_create_group(&asuspf_device->dev.kobj,
+ &asuspf_attribute_group);
+ if (result)
+ goto fail_sysfs;
+
+ return 0;
+
+ fail_sysfs:
+ platform_device_del(asuspf_device);
+
+ fail_platform_device2:
+ platform_device_put(asuspf_device);
+
+ fail_platform_device1:
+ platform_driver_unregister(&asuspf_driver);
+
+ fail_platform_driver:
+ asus_led_exit();
+
+ fail_led:
+ asus_backlight_exit();
+
+ fail_backlight:
+
+ return result;
+}
+
+module_init(asus_laptop_init);
+module_exit(asus_laptop_exit);
#include <linux/tifm.h>
#include <linux/dma-mapping.h>
+#include <linux/freezer.h>
#define DRIVER_NAME "tifm_7xx1"
-#define DRIVER_VERSION "0.6"
+#define DRIVER_VERSION "0.7"
static void tifm_7xx1_eject(struct tifm_adapter *fm, struct tifm_dev *sock)
{
- int cnt;
- unsigned long flags;
-
- spin_lock_irqsave(&fm->lock, flags);
- if (!fm->inhibit_new_cards) {
- for (cnt = 0; cnt < fm->max_sockets; cnt++) {
- if (fm->sockets[cnt] == sock) {
- fm->remove_mask |= (1 << cnt);
- queue_work(fm->wq, &fm->media_remover);
- break;
- }
- }
- }
- spin_unlock_irqrestore(&fm->lock, flags);
-}
-
-static void tifm_7xx1_remove_media(struct work_struct *work)
-{
- struct tifm_adapter *fm =
- container_of(work, struct tifm_adapter, media_remover);
unsigned long flags;
- int cnt;
- struct tifm_dev *sock;
- if (!class_device_get(&fm->cdev))
- return;
spin_lock_irqsave(&fm->lock, flags);
- for (cnt = 0; cnt < fm->max_sockets; cnt++) {
- if (fm->sockets[cnt] && (fm->remove_mask & (1 << cnt))) {
- printk(KERN_INFO DRIVER_NAME
- ": demand removing card from socket %d\n", cnt);
- sock = fm->sockets[cnt];
- fm->sockets[cnt] = NULL;
- fm->remove_mask &= ~(1 << cnt);
-
- writel(0x0e00, sock->addr + SOCK_CONTROL);
-
- writel((TIFM_IRQ_FIFOMASK | TIFM_IRQ_CARDMASK) << cnt,
- fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- writel((TIFM_IRQ_FIFOMASK | TIFM_IRQ_CARDMASK) << cnt,
- fm->addr + FM_SET_INTERRUPT_ENABLE);
-
- spin_unlock_irqrestore(&fm->lock, flags);
- device_unregister(&sock->dev);
- spin_lock_irqsave(&fm->lock, flags);
- }
- }
+ fm->socket_change_set |= 1 << sock->socket_id;
+ wake_up_all(&fm->change_set_notify);
spin_unlock_irqrestore(&fm->lock, flags);
- class_device_put(&fm->cdev);
}
static irqreturn_t tifm_7xx1_isr(int irq, void *dev_id)
{
struct tifm_adapter *fm = dev_id;
+ struct tifm_dev *sock;
unsigned int irq_status;
unsigned int sock_irq_status, cnt;
if (irq_status & TIFM_IRQ_ENABLE) {
writel(TIFM_IRQ_ENABLE, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- for (cnt = 0; cnt < fm->max_sockets; cnt++) {
- sock_irq_status = (irq_status >> cnt) &
- (TIFM_IRQ_FIFOMASK | TIFM_IRQ_CARDMASK);
-
- if (fm->sockets[cnt]) {
- if (sock_irq_status &&
- fm->sockets[cnt]->signal_irq)
- sock_irq_status = fm->sockets[cnt]->
- signal_irq(fm->sockets[cnt],
- sock_irq_status);
+ for (cnt = 0; cnt < fm->num_sockets; cnt++) {
+ sock = fm->sockets[cnt];
+ sock_irq_status = (irq_status >> cnt)
+ & (TIFM_IRQ_FIFOMASK(1)
+ | TIFM_IRQ_CARDMASK(1));
- if (irq_status & (1 << cnt))
- fm->remove_mask |= 1 << cnt;
- } else {
- if (irq_status & (1 << cnt))
- fm->insert_mask |= 1 << cnt;
- }
+ if (sock && sock_irq_status)
+ sock->signal_irq(sock, sock_irq_status);
}
+
+ fm->socket_change_set |= irq_status
+ & ((1 << fm->num_sockets) - 1);
}
writel(irq_status, fm->addr + FM_INTERRUPT_STATUS);
- if (!fm->inhibit_new_cards) {
- if (!fm->remove_mask && !fm->insert_mask) {
- writel(TIFM_IRQ_ENABLE,
- fm->addr + FM_SET_INTERRUPT_ENABLE);
- } else {
- queue_work(fm->wq, &fm->media_remover);
- queue_work(fm->wq, &fm->media_inserter);
- }
- }
+ if (!fm->socket_change_set)
+ writel(TIFM_IRQ_ENABLE, fm->addr + FM_SET_INTERRUPT_ENABLE);
+ else
+ wake_up_all(&fm->change_set_notify);
spin_unlock(&fm->lock);
return IRQ_HANDLED;
}
-static tifm_media_id tifm_7xx1_toggle_sock_power(char __iomem *sock_addr, int is_x2)
+static tifm_media_id tifm_7xx1_toggle_sock_power(char __iomem *sock_addr,
+ int is_x2)
{
unsigned int s_state;
int cnt;
writel(0x0e00, sock_addr + SOCK_CONTROL);
for (cnt = 0; cnt < 100; cnt++) {
- if (!(TIFM_SOCK_STATE_POWERED &
- readl(sock_addr + SOCK_PRESENT_STATE)))
+ if (!(TIFM_SOCK_STATE_POWERED
+ & readl(sock_addr + SOCK_PRESENT_STATE)))
break;
msleep(10);
}
}
for (cnt = 0; cnt < 100; cnt++) {
- if ((TIFM_SOCK_STATE_POWERED &
- readl(sock_addr + SOCK_PRESENT_STATE)))
+ if ((TIFM_SOCK_STATE_POWERED
+ & readl(sock_addr + SOCK_PRESENT_STATE)))
break;
msleep(10);
}
return base_addr + ((sock_num + 1) << 10);
}
-static void tifm_7xx1_insert_media(struct work_struct *work)
+static int tifm_7xx1_switch_media(void *data)
{
- struct tifm_adapter *fm =
- container_of(work, struct tifm_adapter, media_inserter);
+ struct tifm_adapter *fm = data;
unsigned long flags;
tifm_media_id media_id;
char *card_name = "xx";
- int cnt, ok_to_register;
- unsigned int insert_mask;
- struct tifm_dev *new_sock = NULL;
+ int cnt, rc;
+ struct tifm_dev *sock;
+ unsigned int socket_change_set;
- if (!class_device_get(&fm->cdev))
- return;
- spin_lock_irqsave(&fm->lock, flags);
- insert_mask = fm->insert_mask;
- fm->insert_mask = 0;
- if (fm->inhibit_new_cards) {
+ while (1) {
+ rc = wait_event_interruptible(fm->change_set_notify,
+ fm->socket_change_set);
+ if (rc == -ERESTARTSYS)
+ try_to_freeze();
+
+ spin_lock_irqsave(&fm->lock, flags);
+ socket_change_set = fm->socket_change_set;
+ fm->socket_change_set = 0;
+
+ dev_dbg(fm->dev, "checking media set %x\n",
+ socket_change_set);
+
+ if (kthread_should_stop())
+ socket_change_set = (1 << fm->num_sockets) - 1;
spin_unlock_irqrestore(&fm->lock, flags);
- class_device_put(&fm->cdev);
- return;
- }
- spin_unlock_irqrestore(&fm->lock, flags);
- for (cnt = 0; cnt < fm->max_sockets; cnt++) {
- if (!(insert_mask & (1 << cnt)))
+ if (!socket_change_set)
continue;
- media_id = tifm_7xx1_toggle_sock_power(tifm_7xx1_sock_addr(fm->addr, cnt),
- fm->max_sockets == 2);
- if (media_id) {
- ok_to_register = 0;
- new_sock = tifm_alloc_device(fm, cnt);
- if (new_sock) {
- new_sock->addr = tifm_7xx1_sock_addr(fm->addr,
- cnt);
- new_sock->media_id = media_id;
- switch (media_id) {
- case 1:
- card_name = "xd";
- break;
- case 2:
- card_name = "ms";
- break;
- case 3:
- card_name = "sd";
- break;
- default:
- break;
- }
- snprintf(new_sock->dev.bus_id, BUS_ID_SIZE,
- "tifm_%s%u:%u", card_name, fm->id, cnt);
+ spin_lock_irqsave(&fm->lock, flags);
+ for (cnt = 0; cnt < fm->num_sockets; cnt++) {
+ if (!(socket_change_set & (1 << cnt)))
+ continue;
+ sock = fm->sockets[cnt];
+ if (sock) {
printk(KERN_INFO DRIVER_NAME
- ": %s card detected in socket %d\n",
- card_name, cnt);
+ ": demand removing card from socket %d\n",
+ cnt);
+ fm->sockets[cnt] = NULL;
+ spin_unlock_irqrestore(&fm->lock, flags);
+ device_unregister(&sock->dev);
spin_lock_irqsave(&fm->lock, flags);
- if (!fm->sockets[cnt]) {
- fm->sockets[cnt] = new_sock;
- ok_to_register = 1;
+ writel(0x0e00,
+ tifm_7xx1_sock_addr(fm->addr, cnt)
+ + SOCK_CONTROL);
+ }
+ if (kthread_should_stop())
+ continue;
+
+ spin_unlock_irqrestore(&fm->lock, flags);
+ media_id = tifm_7xx1_toggle_sock_power(
+ tifm_7xx1_sock_addr(fm->addr, cnt),
+ fm->num_sockets == 2);
+ if (media_id) {
+ sock = tifm_alloc_device(fm);
+ if (sock) {
+ sock->addr = tifm_7xx1_sock_addr(fm->addr,
+ cnt);
+ sock->media_id = media_id;
+ sock->socket_id = cnt;
+ switch (media_id) {
+ case 1:
+ card_name = "xd";
+ break;
+ case 2:
+ card_name = "ms";
+ break;
+ case 3:
+ card_name = "sd";
+ break;
+ default:
+ tifm_free_device(&sock->dev);
+ spin_lock_irqsave(&fm->lock, flags);
+ continue;
+ }
+ snprintf(sock->dev.bus_id, BUS_ID_SIZE,
+ "tifm_%s%u:%u", card_name,
+ fm->id, cnt);
+ printk(KERN_INFO DRIVER_NAME
+ ": %s card detected in socket %d\n",
+ card_name, cnt);
+ if (!device_register(&sock->dev)) {
+ spin_lock_irqsave(&fm->lock, flags);
+ if (!fm->sockets[cnt]) {
+ fm->sockets[cnt] = sock;
+ sock = NULL;
+ }
+ spin_unlock_irqrestore(&fm->lock, flags);
+ }
+ if (sock)
+ tifm_free_device(&sock->dev);
}
+ spin_lock_irqsave(&fm->lock, flags);
+ }
+ }
+
+ if (!kthread_should_stop()) {
+ writel(TIFM_IRQ_FIFOMASK(socket_change_set)
+ | TIFM_IRQ_CARDMASK(socket_change_set),
+ fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
+ writel(TIFM_IRQ_FIFOMASK(socket_change_set)
+ | TIFM_IRQ_CARDMASK(socket_change_set),
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ writel(TIFM_IRQ_ENABLE,
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ spin_unlock_irqrestore(&fm->lock, flags);
+ } else {
+ for (cnt = 0; cnt < fm->num_sockets; cnt++) {
+ if (fm->sockets[cnt])
+ fm->socket_change_set |= 1 << cnt;
+ }
+ if (!fm->socket_change_set) {
+ spin_unlock_irqrestore(&fm->lock, flags);
+ return 0;
+ } else {
spin_unlock_irqrestore(&fm->lock, flags);
- if (!ok_to_register ||
- device_register(&new_sock->dev)) {
- spin_lock_irqsave(&fm->lock, flags);
- fm->sockets[cnt] = NULL;
- spin_unlock_irqrestore(&fm->lock,
- flags);
- tifm_free_device(&new_sock->dev);
- }
}
}
- writel((TIFM_IRQ_FIFOMASK | TIFM_IRQ_CARDMASK) << cnt,
- fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- writel((TIFM_IRQ_FIFOMASK | TIFM_IRQ_CARDMASK) << cnt,
- fm->addr + FM_SET_INTERRUPT_ENABLE);
}
-
- writel(TIFM_IRQ_ENABLE, fm->addr + FM_SET_INTERRUPT_ENABLE);
- class_device_put(&fm->cdev);
+ return 0;
}
+#ifdef CONFIG_PM
+
static int tifm_7xx1_suspend(struct pci_dev *dev, pm_message_t state)
{
- struct tifm_adapter *fm = pci_get_drvdata(dev);
- unsigned long flags;
+ dev_dbg(&dev->dev, "suspending host\n");
- spin_lock_irqsave(&fm->lock, flags);
- fm->inhibit_new_cards = 1;
- fm->remove_mask = 0xf;
- fm->insert_mask = 0;
- writel(TIFM_IRQ_ENABLE, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- spin_unlock_irqrestore(&fm->lock, flags);
- flush_workqueue(fm->wq);
-
- tifm_7xx1_remove_media(&fm->media_remover);
-
- pci_set_power_state(dev, PCI_D3hot);
- pci_disable_device(dev);
- pci_save_state(dev);
+ pci_save_state(dev);
+ pci_enable_wake(dev, pci_choose_state(dev, state), 0);
+ pci_disable_device(dev);
+ pci_set_power_state(dev, pci_choose_state(dev, state));
return 0;
}
static int tifm_7xx1_resume(struct pci_dev *dev)
{
struct tifm_adapter *fm = pci_get_drvdata(dev);
+ int cnt, rc;
unsigned long flags;
+ tifm_media_id new_ids[fm->num_sockets];
+ pci_set_power_state(dev, PCI_D0);
pci_restore_state(dev);
- pci_enable_device(dev);
- pci_set_power_state(dev, PCI_D0);
- pci_set_master(dev);
+ rc = pci_enable_device(dev);
+ if (rc)
+ return rc;
+ pci_set_master(dev);
+ dev_dbg(&dev->dev, "resuming host\n");
+
+ for (cnt = 0; cnt < fm->num_sockets; cnt++)
+ new_ids[cnt] = tifm_7xx1_toggle_sock_power(
+ tifm_7xx1_sock_addr(fm->addr, cnt),
+ fm->num_sockets == 2);
spin_lock_irqsave(&fm->lock, flags);
- fm->inhibit_new_cards = 0;
- writel(TIFM_IRQ_SETALL, fm->addr + FM_INTERRUPT_STATUS);
- writel(TIFM_IRQ_SETALL, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SETALLSOCK,
- fm->addr + FM_SET_INTERRUPT_ENABLE);
- fm->insert_mask = 0xf;
+ fm->socket_change_set = 0;
+ for (cnt = 0; cnt < fm->num_sockets; cnt++) {
+ if (fm->sockets[cnt]) {
+ if (fm->sockets[cnt]->media_id == new_ids[cnt])
+ fm->socket_change_set |= 1 << cnt;
+
+ fm->sockets[cnt]->media_id = new_ids[cnt];
+ }
+ }
+
+ writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1),
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ if (!fm->socket_change_set) {
+ spin_unlock_irqrestore(&fm->lock, flags);
+ return 0;
+ } else {
+ fm->socket_change_set = 0;
+ spin_unlock_irqrestore(&fm->lock, flags);
+ }
+
+ wait_event_timeout(fm->change_set_notify, fm->socket_change_set, HZ);
+
+ spin_lock_irqsave(&fm->lock, flags);
+ writel(TIFM_IRQ_FIFOMASK(fm->socket_change_set)
+ | TIFM_IRQ_CARDMASK(fm->socket_change_set),
+ fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
+ writel(TIFM_IRQ_FIFOMASK(fm->socket_change_set)
+ | TIFM_IRQ_CARDMASK(fm->socket_change_set),
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ writel(TIFM_IRQ_ENABLE,
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ fm->socket_change_set = 0;
+
spin_unlock_irqrestore(&fm->lock, flags);
return 0;
}
+#else
+
+#define tifm_7xx1_suspend NULL
+#define tifm_7xx1_resume NULL
+
+#endif /* CONFIG_PM */
+
static int tifm_7xx1_probe(struct pci_dev *dev,
- const struct pci_device_id *dev_id)
+ const struct pci_device_id *dev_id)
{
struct tifm_adapter *fm;
int pci_dev_busy = 0;
}
fm->dev = &dev->dev;
- fm->max_sockets = (dev->device == 0x803B) ? 2 : 4;
- fm->sockets = kzalloc(sizeof(struct tifm_dev*) * fm->max_sockets,
- GFP_KERNEL);
+ fm->num_sockets = (dev->device == PCI_DEVICE_ID_TI_XX21_XX11_FM)
+ ? 4 : 2;
+ fm->sockets = kzalloc(sizeof(struct tifm_dev*) * fm->num_sockets,
+ GFP_KERNEL);
if (!fm->sockets)
goto err_out_free;
- INIT_WORK(&fm->media_inserter, tifm_7xx1_insert_media);
- INIT_WORK(&fm->media_remover, tifm_7xx1_remove_media);
fm->eject = tifm_7xx1_eject;
pci_set_drvdata(dev, fm);
fm->addr = ioremap(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
+ pci_resource_len(dev, 0));
if (!fm->addr)
goto err_out_free;
if (rc)
goto err_out_unmap;
- rc = tifm_add_adapter(fm);
+ init_waitqueue_head(&fm->change_set_notify);
+ rc = tifm_add_adapter(fm, tifm_7xx1_switch_media);
if (rc)
goto err_out_irq;
writel(TIFM_IRQ_SETALL, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SETALLSOCK,
- fm->addr + FM_SET_INTERRUPT_ENABLE);
-
- fm->insert_mask = 0xf;
-
+ writel(TIFM_IRQ_ENABLE | TIFM_IRQ_SOCKMASK((1 << fm->num_sockets) - 1),
+ fm->addr + FM_SET_INTERRUPT_ENABLE);
+ wake_up_process(fm->media_switcher);
return 0;
err_out_irq:
struct tifm_adapter *fm = pci_get_drvdata(dev);
unsigned long flags;
+ writel(TIFM_IRQ_SETALL, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
+ mmiowb();
+ free_irq(dev->irq, fm);
+
spin_lock_irqsave(&fm->lock, flags);
- fm->inhibit_new_cards = 1;
- fm->remove_mask = 0xf;
- fm->insert_mask = 0;
- writel(TIFM_IRQ_ENABLE, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
+ fm->socket_change_set = (1 << fm->num_sockets) - 1;
spin_unlock_irqrestore(&fm->lock, flags);
- flush_workqueue(fm->wq);
-
- tifm_7xx1_remove_media(&fm->media_remover);
-
- writel(TIFM_IRQ_SETALL, fm->addr + FM_CLEAR_INTERRUPT_ENABLE);
- free_irq(dev->irq, fm);
+ kthread_stop(fm->media_switcher);
tifm_remove_adapter(fm);
}
static struct pci_device_id tifm_7xx1_pci_tbl [] = {
- { PCI_VENDOR_ID_TI, 0x8033, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- 0 }, /* xx21 - the one I have */
- { PCI_VENDOR_ID_TI, 0x803B, PCI_ANY_ID, PCI_ANY_ID, 0, 0,
- 0 }, /* xx12 - should be also supported */
+ { PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX21_XX11_FM, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 }, /* xx21 - the one I have */
+ { PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX12_FM, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_XX20_FM, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
{ }
};
#include <linux/idr.h>
#define DRIVER_NAME "tifm_core"
-#define DRIVER_VERSION "0.6"
+#define DRIVER_VERSION "0.7"
static DEFINE_IDR(tifm_adapter_idr);
static DEFINE_SPINLOCK(tifm_adapter_lock);
return 0;
}
+#ifdef CONFIG_PM
+
+static int tifm_device_suspend(struct device *dev, pm_message_t state)
+{
+ struct tifm_dev *fm_dev = container_of(dev, struct tifm_dev, dev);
+ struct tifm_driver *drv = fm_dev->drv;
+
+ if (drv && drv->suspend)
+ return drv->suspend(fm_dev, state);
+ return 0;
+}
+
+static int tifm_device_resume(struct device *dev)
+{
+ struct tifm_dev *fm_dev = container_of(dev, struct tifm_dev, dev);
+ struct tifm_driver *drv = fm_dev->drv;
+
+ if (drv && drv->resume)
+ return drv->resume(fm_dev);
+ return 0;
+}
+
+#else
+
+#define tifm_device_suspend NULL
+#define tifm_device_resume NULL
+
+#endif /* CONFIG_PM */
+
static struct bus_type tifm_bus_type = {
.name = "tifm",
.match = tifm_match,
.uevent = tifm_uevent,
+ .suspend = tifm_device_suspend,
+ .resume = tifm_device_resume
};
static void tifm_free(struct class_device *cdev)
struct tifm_adapter *fm = container_of(cdev, struct tifm_adapter, cdev);
kfree(fm->sockets);
- if (fm->wq)
- destroy_workqueue(fm->wq);
kfree(fm);
}
}
EXPORT_SYMBOL(tifm_free_adapter);
-int tifm_add_adapter(struct tifm_adapter *fm)
+int tifm_add_adapter(struct tifm_adapter *fm,
+ int (*mediathreadfn)(void *data))
{
int rc;
spin_unlock(&tifm_adapter_lock);
if (!rc) {
snprintf(fm->cdev.class_id, BUS_ID_SIZE, "tifm%u", fm->id);
- strncpy(fm->wq_name, fm->cdev.class_id, KOBJ_NAME_LEN);
+ fm->media_switcher = kthread_create(mediathreadfn,
+ fm, "tifm/%u", fm->id);
- fm->wq = create_singlethread_workqueue(fm->wq_name);
- if (fm->wq)
+ if (!IS_ERR(fm->media_switcher))
return class_device_add(&fm->cdev);
spin_lock(&tifm_adapter_lock);
void tifm_free_device(struct device *dev)
{
struct tifm_dev *fm_dev = container_of(dev, struct tifm_dev, dev);
- if (fm_dev->wq)
- destroy_workqueue(fm_dev->wq);
kfree(fm_dev);
}
EXPORT_SYMBOL(tifm_free_device);
-struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id)
+static void tifm_dummy_signal_irq(struct tifm_dev *sock,
+ unsigned int sock_irq_status)
+{
+ return;
+}
+
+struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm)
{
struct tifm_dev *dev = kzalloc(sizeof(struct tifm_dev), GFP_KERNEL);
if (dev) {
spin_lock_init(&dev->lock);
- snprintf(dev->wq_name, KOBJ_NAME_LEN, "tifm%u:%u", fm->id, id);
- dev->wq = create_singlethread_workqueue(dev->wq_name);
- if (!dev->wq) {
- kfree(dev);
- return NULL;
- }
+
dev->dev.parent = fm->dev;
dev->dev.bus = &tifm_bus_type;
dev->dev.release = tifm_free_device;
+ dev->signal_irq = tifm_dummy_signal_irq;
}
return dev;
}
struct tifm_driver *drv = fm_dev->drv;
if (drv) {
+ fm_dev->signal_irq = tifm_dummy_signal_irq;
if (drv->remove)
drv->remove(fm_dev);
fm_dev->drv = NULL;
drv->driver.bus = &tifm_bus_type;
drv->driver.probe = tifm_device_probe;
drv->driver.remove = tifm_device_remove;
+ drv->driver.suspend = tifm_device_suspend;
+ drv->driver.resume = tifm_device_resume;
return driver_register(&drv->driver);
}
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
mmc->caps = MMC_CAP_BYTEBLOCK;
+ mmc->max_blk_size = 4095;
+ mmc->max_blk_count = mmc->max_req_size;
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->buffer = NULL;
? 1 : 0;
}
-static inline int au1xmmc_card_readonly(struct au1xmmc_host *host)
+static int au1xmmc_card_readonly(struct mmc_host *mmc)
{
+ struct au1xmmc_host *host = mmc_priv(mmc);
return (bcsr->status & au1xmmc_card_table[host->id].wpstatus)
? 1 : 0;
}
u32 mmccmd = (cmd->opcode << SD_CMD_CI_SHIFT);
switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ break;
case MMC_RSP_R1:
mmccmd |= SD_CMD_RT_1;
break;
case MMC_RSP_R3:
mmccmd |= SD_CMD_RT_3;
break;
+ default:
+ printk(KERN_INFO "au1xmmc: unhandled response type %02x\n",
+ mmc_resp_type(cmd));
+ return MMC_ERR_INVALID;
}
switch(cmd->opcode) {
static const struct mmc_host_ops au1xmmc_ops = {
.request = au1xmmc_request,
.set_ios = au1xmmc_set_ios,
+ .get_ro = au1xmmc_card_readonly,
};
static int __devinit au1xmmc_probe(struct platform_device *pdev)
mmc->max_seg_size = AU1XMMC_DESCRIPTOR_SIZE;
mmc->max_phys_segs = AU1XMMC_DESCRIPTOR_COUNT;
+ mmc->max_blk_size = 2048;
+ mmc->max_blk_count = 512;
+
mmc->ocr_avail = AU1XMMC_OCR;
host = mmc_priv(mmc);
/* MMC core transfer sizes tunable parameters */
mmc->max_hw_segs = 64;
mmc->max_phys_segs = 64;
- mmc->max_sectors = 64; /* default 1 << (PAGE_CACHE_SHIFT - 9) */
mmc->max_seg_size = 64*512; /* default PAGE_CACHE_SIZE */
+ mmc->max_req_size = 64*512; /* default PAGE_CACHE_SIZE */
+ mmc->max_blk_size = 2048;
+ mmc->max_blk_count = 65535;
host = mmc_priv(mmc);
host->mmc = mmc;
mmc_hostname(host), mrq->cmd->opcode,
mrq->cmd->arg, mrq->cmd->flags);
- WARN_ON(host->card_busy == NULL);
+ WARN_ON(!host->claimed);
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
if (mrq->data) {
+ BUG_ON(mrq->data->blksz > host->max_blk_size);
+ BUG_ON(mrq->data->blocks > host->max_blk_count);
+ BUG_ON(mrq->data->blocks * mrq->data->blksz >
+ host->max_req_size);
+
mrq->cmd->data = mrq->data;
mrq->data->error = 0;
mrq->data->mrq = mrq;
{
struct mmc_request mrq;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
memset(&mrq, 0, sizeof(struct mmc_request));
int i, err;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
BUG_ON(retries < 0);
err = MMC_ERR_INVALID;
else
limit_us = 100000;
- if (timeout_us > limit_us) {
+ /*
+ * SDHC cards always use these fixed values.
+ */
+ if (timeout_us > limit_us || mmc_card_blockaddr(card)) {
data->timeout_ns = limit_us * 1000;
data->timeout_clks = 0;
}
spin_lock_irqsave(&host->lock, flags);
while (1) {
set_current_state(TASK_UNINTERRUPTIBLE);
- if (host->card_busy == NULL)
+ if (!host->claimed)
break;
spin_unlock_irqrestore(&host->lock, flags);
schedule();
spin_lock_irqsave(&host->lock, flags);
}
set_current_state(TASK_RUNNING);
- host->card_busy = card;
+ host->claimed = 1;
spin_unlock_irqrestore(&host->lock, flags);
remove_wait_queue(&host->wq, &wait);
{
unsigned long flags;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
spin_lock_irqsave(&host->lock, flags);
- host->card_busy = NULL;
+ host->claimed = 0;
spin_unlock_irqrestore(&host->lock, flags);
wake_up(&host->wq);
mmc_hostname(host), ios->clock, ios->bus_mode,
ios->power_mode, ios->chip_select, ios->vdd,
ios->bus_width);
-
+
host->ops->set_ios(host, ios);
}
int err;
struct mmc_command cmd;
- BUG_ON(host->card_busy == NULL);
+ BUG_ON(!host->claimed);
if (host->card_selected == card)
return MMC_ERR_NONE;
if (mmc_card_sd(card)) {
csd_struct = UNSTUFF_BITS(resp, 126, 2);
- if (csd_struct != 0) {
+
+ switch (csd_struct) {
+ case 0:
+ m = UNSTUFF_BITS(resp, 115, 4);
+ e = UNSTUFF_BITS(resp, 112, 3);
+ csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
+ csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
+
+ m = UNSTUFF_BITS(resp, 99, 4);
+ e = UNSTUFF_BITS(resp, 96, 3);
+ csd->max_dtr = tran_exp[e] * tran_mant[m];
+ csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
+
+ e = UNSTUFF_BITS(resp, 47, 3);
+ m = UNSTUFF_BITS(resp, 62, 12);
+ csd->capacity = (1 + m) << (e + 2);
+
+ csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
+ csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
+ csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
+ csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
+ csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
+ csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
+ csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
+ break;
+ case 1:
+ /*
+ * This is a block-addressed SDHC card. Most
+ * interesting fields are unused and have fixed
+ * values. To avoid getting tripped by buggy cards,
+ * we assume those fixed values ourselves.
+ */
+ mmc_card_set_blockaddr(card);
+
+ csd->tacc_ns = 0; /* Unused */
+ csd->tacc_clks = 0; /* Unused */
+
+ m = UNSTUFF_BITS(resp, 99, 4);
+ e = UNSTUFF_BITS(resp, 96, 3);
+ csd->max_dtr = tran_exp[e] * tran_mant[m];
+ csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
+
+ m = UNSTUFF_BITS(resp, 48, 22);
+ csd->capacity = (1 + m) << 10;
+
+ csd->read_blkbits = 9;
+ csd->read_partial = 0;
+ csd->write_misalign = 0;
+ csd->read_misalign = 0;
+ csd->r2w_factor = 4; /* Unused */
+ csd->write_blkbits = 9;
+ csd->write_partial = 0;
+ break;
+ default:
printk("%s: unrecognised CSD structure version %d\n",
mmc_hostname(card->host), csd_struct);
mmc_card_set_bad(card);
return;
}
-
- m = UNSTUFF_BITS(resp, 115, 4);
- e = UNSTUFF_BITS(resp, 112, 3);
- csd->tacc_ns = (tacc_exp[e] * tacc_mant[m] + 9) / 10;
- csd->tacc_clks = UNSTUFF_BITS(resp, 104, 8) * 100;
-
- m = UNSTUFF_BITS(resp, 99, 4);
- e = UNSTUFF_BITS(resp, 96, 3);
- csd->max_dtr = tran_exp[e] * tran_mant[m];
- csd->cmdclass = UNSTUFF_BITS(resp, 84, 12);
-
- e = UNSTUFF_BITS(resp, 47, 3);
- m = UNSTUFF_BITS(resp, 62, 12);
- csd->capacity = (1 + m) << (e + 2);
-
- csd->read_blkbits = UNSTUFF_BITS(resp, 80, 4);
- csd->read_partial = UNSTUFF_BITS(resp, 79, 1);
- csd->write_misalign = UNSTUFF_BITS(resp, 78, 1);
- csd->read_misalign = UNSTUFF_BITS(resp, 77, 1);
- csd->r2w_factor = UNSTUFF_BITS(resp, 26, 3);
- csd->write_blkbits = UNSTUFF_BITS(resp, 22, 4);
- csd->write_partial = UNSTUFF_BITS(resp, 21, 1);
} else {
/*
* We only understand CSD structure v1.1 and v1.2.
return err;
}
+static int mmc_send_if_cond(struct mmc_host *host, u32 ocr, int *rsd2)
+{
+ struct mmc_command cmd;
+ int err, sd2;
+ static const u8 test_pattern = 0xAA;
+
+ /*
+ * To support SD 2.0 cards, we must always invoke SD_SEND_IF_COND
+ * before SD_APP_OP_COND. This command will harmlessly fail for
+ * SD 1.0 cards.
+ */
+ cmd.opcode = SD_SEND_IF_COND;
+ cmd.arg = ((ocr & 0xFF8000) != 0) << 8 | test_pattern;
+ cmd.flags = MMC_RSP_R7 | MMC_CMD_BCR;
+
+ err = mmc_wait_for_cmd(host, &cmd, 0);
+ if (err == MMC_ERR_NONE) {
+ if ((cmd.resp[0] & 0xFF) == test_pattern) {
+ sd2 = 1;
+ } else {
+ sd2 = 0;
+ err = MMC_ERR_FAILED;
+ }
+ } else {
+ /*
+ * Treat errors as SD 1.0 card.
+ */
+ sd2 = 0;
+ err = MMC_ERR_NONE;
+ }
+ if (rsd2)
+ *rsd2 = sd2;
+ return err;
+}
+
/*
* Discover cards by requesting their CID. If this command
* times out, it is not an error; there are no further cards
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read EXT_CSD, performance "
+ "might suffer.\n", mmc_hostname(card->host));
continue;
}
printk("%s: card is mmc v4 but doesn't support "
"any high-speed modes.\n",
mmc_hostname(card->host));
- mmc_card_set_bad(card);
continue;
}
mmc_wait_for_req(host, &mrq);
if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
+ printk("%s: unable to read switch capabilities, "
+ "performance might suffer.\n",
+ mmc_hostname(card->host));
continue;
}
mmc_wait_for_req(host, &mrq);
- if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE) {
- mmc_card_set_dead(card);
- continue;
- }
-
- if ((status[16] & 0xF) != 1) {
+ if (cmd.error != MMC_ERR_NONE || data.error != MMC_ERR_NONE ||
+ (status[16] & 0xF) != 1) {
printk(KERN_WARNING "%s: Problem switching card "
"into high-speed mode!\n",
mmc_hostname(host));
mmc_power_up(host);
mmc_idle_cards(host);
+ err = mmc_send_if_cond(host, host->ocr_avail, NULL);
+ if (err != MMC_ERR_NONE) {
+ return;
+ }
err = mmc_send_app_op_cond(host, 0, &ocr);
/*
* all get the idea that they should be ready for CMD2.
* (My SanDisk card seems to need this.)
*/
- if (host->mode == MMC_MODE_SD)
- mmc_send_app_op_cond(host, host->ocr, NULL);
- else
+ if (host->mode == MMC_MODE_SD) {
+ int err, sd2;
+ err = mmc_send_if_cond(host, host->ocr, &sd2);
+ if (err == MMC_ERR_NONE) {
+ /*
+ * If SD_SEND_IF_COND indicates an SD 2.0
+ * compliant card and we should set bit 30
+ * of the ocr to indicate that we can handle
+ * block-addressed SDHC cards.
+ */
+ mmc_send_app_op_cond(host, host->ocr | (sd2 << 30), NULL);
+ }
+ } else {
mmc_send_op_cond(host, host->ocr, NULL);
+ }
mmc_discover_cards(host);
*/
host->max_hw_segs = 1;
host->max_phys_segs = 1;
- host->max_sectors = 1 << (PAGE_CACHE_SHIFT - 9);
host->max_seg_size = PAGE_CACHE_SIZE;
+
+ host->max_req_size = PAGE_CACHE_SIZE;
+ host->max_blk_size = 512;
+ host->max_blk_count = PAGE_CACHE_SIZE / 512;
}
return host;
brq.mrq.cmd = &brq.cmd;
brq.mrq.data = &brq.data;
- brq.cmd.arg = req->sector << 9;
+ brq.cmd.arg = req->sector;
+ if (!mmc_card_blockaddr(card))
+ brq.cmd.arg <<= 9;
brq.cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
brq.data.blksz = 1 << md->block_bits;
- brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
brq.stop.opcode = MMC_STOP_TRANSMISSION;
brq.stop.arg = 0;
brq.stop.flags = MMC_RSP_R1B | MMC_CMD_AC;
+ brq.data.blocks = req->nr_sectors >> (md->block_bits - 9);
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
mmc_set_data_timeout(&brq.data, card, rq_data_dir(req) != READ);
spin_unlock_irq(&md->lock);
}
+flush_queue:
+
mmc_card_release_host(card);
-flush_queue:
spin_lock_irq(&md->lock);
while (ret) {
ret = end_that_request_chunk(req, 0,
struct mmc_command cmd;
int err;
+ /* Block-addressed cards ignore MMC_SET_BLOCKLEN. */
+ if (mmc_card_blockaddr(card))
+ return 0;
+
mmc_card_claim_host(card);
cmd.opcode = MMC_SET_BLOCKLEN;
cmd.arg = 1 << md->block_bits;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
blk_queue_bounce_limit(mq->queue, limit);
- blk_queue_max_sectors(mq->queue, host->max_sectors);
+ blk_queue_max_sectors(mq->queue, host->max_req_size / 512);
blk_queue_max_phys_segments(mq->queue, host->max_phys_segs);
blk_queue_max_hw_segments(mq->queue, host->max_hw_segs);
blk_queue_max_segment_size(mq->queue, host->max_seg_size);
memset(card, 0, sizeof(struct mmc_card));
card->host = host;
device_initialize(&card->dev);
- card->dev.parent = mmc_dev(host);
+ card->dev.parent = mmc_classdev(host);
card->dev.bus = &mmc_bus_type;
card->dev.release = mmc_release_card;
}
/*
* Since we only have a 16-bit data length register, we must
* ensure that we don't exceed 2^16-1 bytes in a single request.
- * Choose 64 (512-byte) sectors as the limit.
*/
- mmc->max_sectors = 64;
+ mmc->max_req_size = 65535;
/*
* Set the maximum segment size. Since we aren't doing DMA
* (yet) we are only limited by the data length register.
*/
- mmc->max_seg_size = mmc->max_sectors << 9;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * Block size can be up to 2048 bytes, but must be a power of two.
+ */
+ mmc->max_blk_size = 2048;
+
+ /*
+ * No limit on the number of blocks transferred.
+ */
+ mmc->max_blk_count = mmc->max_req_size;
spin_lock_init(&host->lock);
*/
mmc->max_phys_segs = 32;
mmc->max_hw_segs = 32;
- mmc->max_sectors = 256; /* NBLK max 11-bits, OMAP also limited by DMA */
- mmc->max_seg_size = mmc->max_sectors * 512;
+ mmc->max_blk_size = 2048; /* BLEN is 11 bits (+1) */
+ mmc->max_blk_count = 2048; /* NBLK is 11 bits (+1) */
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
if (host->power_pin >= 0) {
if ((ret = omap_request_gpio(host->power_pin)) != 0) {
*/
mmc->max_seg_size = PAGE_SIZE;
+ /*
+ * Block length register is 10 bits.
+ */
+ mmc->max_blk_size = 1023;
+
+ /*
+ * Block count register is 16 bits.
+ */
+ mmc->max_blk_count = 65535;
+
host = mmc_priv(mmc);
host->mmc = mmc;
host->dma = -1;
#define SDHCI_QUIRK_FORCE_DMA (1<<1)
/* Controller doesn't like some resets when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2)
+#define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3)
static const struct pci_device_id pci_ids[] __devinitdata = {
{
.driver_data = SDHCI_QUIRK_FORCE_DMA,
},
+ {
+ .vendor = PCI_VENDOR_ID_ENE,
+ .device = PCI_DEVICE_ID_ENE_CB712_SD,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE,
+ },
+
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
* *
\*****************************************************************************/
-static inline char* sdhci_kmap_sg(struct sdhci_host* host)
+static inline char* sdhci_sg_to_buffer(struct sdhci_host* host)
{
- host->mapped_sg = kmap_atomic(host->cur_sg->page, KM_BIO_SRC_IRQ);
- return host->mapped_sg + host->cur_sg->offset;
-}
-
-static inline void sdhci_kunmap_sg(struct sdhci_host* host)
-{
- kunmap_atomic(host->mapped_sg, KM_BIO_SRC_IRQ);
+ return page_address(host->cur_sg->page) + host->cur_sg->offset;
}
static inline int sdhci_next_sg(struct sdhci_host* host)
chunk_remain = 0;
data = 0;
- buffer = sdhci_kmap_sg(host) + host->offset;
+ buffer = sdhci_sg_to_buffer(host) + host->offset;
while (blksize) {
if (chunk_remain == 0) {
}
if (host->remain == 0) {
- sdhci_kunmap_sg(host);
if (sdhci_next_sg(host) == 0) {
BUG_ON(blksize != 0);
return;
}
- buffer = sdhci_kmap_sg(host);
+ buffer = sdhci_sg_to_buffer(host);
}
}
-
- sdhci_kunmap_sg(host);
}
static void sdhci_write_block_pio(struct sdhci_host *host)
data = 0;
bytes = 0;
- buffer = sdhci_kmap_sg(host) + host->offset;
+ buffer = sdhci_sg_to_buffer(host) + host->offset;
while (blksize) {
size = min(host->size, host->remain);
}
if (host->remain == 0) {
- sdhci_kunmap_sg(host);
if (sdhci_next_sg(host) == 0) {
BUG_ON(blksize != 0);
return;
}
- buffer = sdhci_kmap_sg(host);
+ buffer = sdhci_sg_to_buffer(host);
}
}
-
- sdhci_kunmap_sg(host);
}
static void sdhci_transfer_pio(struct sdhci_host *host)
/* Sanity checks */
BUG_ON(data->blksz * data->blocks > 524288);
- BUG_ON(data->blksz > host->max_block);
+ BUG_ON(data->blksz > host->mmc->max_blk_size);
BUG_ON(data->blocks > 65535);
/* timeout in us */
if (host->power == power)
return;
- writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
-
- if (power == (unsigned short)-1)
+ if (power == (unsigned short)-1) {
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
goto out;
+ }
+
+ /*
+ * Spec says that we should clear the power reg before setting
+ * a new value. Some controllers don't seem to like this though.
+ */
+ if (!(host->chip->quirks & SDHCI_QUIRK_SINGLE_POWER_WRITE))
+ writeb(0, host->ioaddr + SDHCI_POWER_CONTROL);
pwr = SDHCI_POWER_ON;
pci_set_power_state(pdev, PCI_D0);
pci_restore_state(pdev);
- pci_enable_device(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
for (i = 0;i < chip->num_slots;i++) {
if (!chip->hosts[i])
if (caps & SDHCI_TIMEOUT_CLK_UNIT)
host->timeout_clk *= 1000;
- host->max_block = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
- if (host->max_block >= 3) {
- printk(KERN_ERR "%s: Invalid maximum block size.\n",
- host->slot_descr);
- ret = -ENODEV;
- goto unmap;
- }
- host->max_block = 512 << host->max_block;
-
/*
* Set host parameters.
*/
mmc->ocr_avail = 0;
if (caps & SDHCI_CAN_VDD_330)
mmc->ocr_avail |= MMC_VDD_32_33|MMC_VDD_33_34;
- else if (caps & SDHCI_CAN_VDD_300)
+ if (caps & SDHCI_CAN_VDD_300)
mmc->ocr_avail |= MMC_VDD_29_30|MMC_VDD_30_31;
- else if (caps & SDHCI_CAN_VDD_180)
+ if (caps & SDHCI_CAN_VDD_180)
mmc->ocr_avail |= MMC_VDD_17_18|MMC_VDD_18_19;
if ((host->max_clk > 25000000) && !(caps & SDHCI_CAN_DO_HISPD)) {
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
- * size (512KiB), which means (512 KiB/512=) 1024 entries.
+ * size (512KiB).
*/
- mmc->max_sectors = 1024;
+ mmc->max_req_size = 524288;
/*
* Maximum segment size. Could be one segment with the maximum number
- * of sectors.
+ * of bytes.
+ */
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * Maximum block size. This varies from controller to controller and
+ * is specified in the capabilities register.
+ */
+ mmc->max_blk_size = (caps & SDHCI_MAX_BLOCK_MASK) >> SDHCI_MAX_BLOCK_SHIFT;
+ if (mmc->max_blk_size >= 3) {
+ printk(KERN_ERR "%s: Invalid maximum block size.\n",
+ host->slot_descr);
+ ret = -ENODEV;
+ goto unmap;
+ }
+ mmc->max_blk_size = 512 << mmc->max_blk_size;
+
+ /*
+ * Maximum block count.
*/
- mmc->max_seg_size = mmc->max_sectors * 512;
+ mmc->max_blk_count = 65535;
/*
* Init tasklets.
unsigned int max_clk; /* Max possible freq (MHz) */
unsigned int timeout_clk; /* Timeout freq (KHz) */
- unsigned int max_block; /* Max block size (bytes) */
unsigned int clock; /* Current clock (MHz) */
unsigned short power; /* Current voltage */
struct mmc_data *data; /* Current data request */
struct scatterlist *cur_sg; /* We're working on this */
- char *mapped_sg; /* This is where it's mapped */
int num_sg; /* Entries left */
int offset; /* Offset into current sg */
int remain; /* Bytes left in current */
#include <asm/io.h>
#define DRIVER_NAME "tifm_sd"
-#define DRIVER_VERSION "0.6"
+#define DRIVER_VERSION "0.7"
static int no_dma = 0;
static int fixed_timeout = 0;
enum {
FIFO_RDY = 0x0001, /* hardware dependent value */
- HOST_REG = 0x0002,
EJECT = 0x0004,
EJECT_DONE = 0x0008,
CARD_BUSY = 0x0010,
card_state_t state;
unsigned int clk_freq;
unsigned int clk_div;
- unsigned long timeout_jiffies; // software timeout - 2 sec
+ unsigned long timeout_jiffies;
+ struct tasklet_struct finish_tasklet;
+ struct timer_list timer;
struct mmc_request *req;
- struct work_struct cmd_handler;
- struct delayed_work abort_handler;
- wait_queue_head_t can_eject;
+ wait_queue_head_t notify;
size_t written_blocks;
- char *buffer;
size_t buffer_size;
size_t buffer_pos;
};
+static char* tifm_sd_data_buffer(struct mmc_data *data)
+{
+ return page_address(data->sg->page) + data->sg->offset;
+}
+
static int tifm_sd_transfer_data(struct tifm_dev *sock, struct tifm_sd *host,
- unsigned int host_status)
+ unsigned int host_status)
{
struct mmc_command *cmd = host->req->cmd;
unsigned int t_val = 0, cnt = 0;
+ char *buffer;
if (host_status & TIFM_MMCSD_BRS) {
/* in non-dma rx mode BRS fires when fifo is still not empty */
- if (host->buffer && (cmd->data->flags & MMC_DATA_READ)) {
+ if (no_dma && (cmd->data->flags & MMC_DATA_READ)) {
+ buffer = tifm_sd_data_buffer(host->req->data);
while (host->buffer_size > host->buffer_pos) {
t_val = readl(sock->addr + SOCK_MMCSD_DATA);
- host->buffer[host->buffer_pos++] = t_val & 0xff;
- host->buffer[host->buffer_pos++] =
+ buffer[host->buffer_pos++] = t_val & 0xff;
+ buffer[host->buffer_pos++] =
(t_val >> 8) & 0xff;
}
}
return 1;
- } else if (host->buffer) {
+ } else if (no_dma) {
+ buffer = tifm_sd_data_buffer(host->req->data);
if ((cmd->data->flags & MMC_DATA_READ) &&
(host_status & TIFM_MMCSD_AF)) {
for (cnt = 0; cnt < TIFM_MMCSD_FIFO_SIZE; cnt++) {
t_val = readl(sock->addr + SOCK_MMCSD_DATA);
if (host->buffer_size > host->buffer_pos) {
- host->buffer[host->buffer_pos++] =
+ buffer[host->buffer_pos++] =
t_val & 0xff;
- host->buffer[host->buffer_pos++] =
+ buffer[host->buffer_pos++] =
(t_val >> 8) & 0xff;
}
}
&& (host_status & TIFM_MMCSD_AE)) {
for (cnt = 0; cnt < TIFM_MMCSD_FIFO_SIZE; cnt++) {
if (host->buffer_size > host->buffer_pos) {
- t_val = host->buffer[host->buffer_pos++] & 0x00ff;
- t_val |= ((host->buffer[host->buffer_pos++]) << 8)
- & 0xff00;
+ t_val = buffer[host->buffer_pos++]
+ & 0x00ff;
+ t_val |= ((buffer[host->buffer_pos++])
+ << 8) & 0xff00;
writel(t_val,
- sock->addr + SOCK_MMCSD_DATA);
+ sock->addr + SOCK_MMCSD_DATA);
}
}
}
cmd_mask |= TIFM_MMCSD_READ;
dev_dbg(&sock->dev, "executing opcode 0x%x, arg: 0x%x, mask: 0x%x\n",
- cmd->opcode, cmd->arg, cmd_mask);
+ cmd->opcode, cmd->arg, cmd_mask);
writel((cmd->arg >> 16) & 0xffff, sock->addr + SOCK_MMCSD_ARG_HIGH);
writel(cmd->arg & 0xffff, sock->addr + SOCK_MMCSD_ARG_LOW);
tifm_sd_fetch_resp(cmd, sock);
if (cmd->data) {
host->state = BRS;
- } else
+ } else {
host->state = READY;
+ }
goto change_state;
}
break;
case BRS:
if (tifm_sd_transfer_data(sock, host, host_status)) {
- if (!host->req->stop) {
- if (cmd->data->flags & MMC_DATA_WRITE) {
- host->state = CARD;
+ if (cmd->data->flags & MMC_DATA_WRITE) {
+ host->state = CARD;
+ } else {
+ if (no_dma) {
+ if (host->req->stop) {
+ tifm_sd_exec(host, host->req->stop);
+ host->state = SCMD;
+ } else {
+ host->state = READY;
+ }
} else {
- host->state =
- host->buffer ? READY : FIFO;
+ host->state = FIFO;
}
- goto change_state;
}
- tifm_sd_exec(host, host->req->stop);
- host->state = SCMD;
+ goto change_state;
}
break;
case SCMD:
if (host_status & TIFM_MMCSD_EOC) {
tifm_sd_fetch_resp(host->req->stop, sock);
- if (cmd->error) {
- host->state = READY;
- } else if (cmd->data->flags & MMC_DATA_WRITE) {
- host->state = CARD;
- } else {
- host->state = host->buffer ? READY : FIFO;
- }
+ host->state = READY;
goto change_state;
}
break;
case CARD:
+ dev_dbg(&sock->dev, "waiting for CARD, have %zd blocks\n",
+ host->written_blocks);
if (!(host->flags & CARD_BUSY)
&& (host->written_blocks == cmd->data->blocks)) {
- host->state = host->buffer ? READY : FIFO;
+ if (no_dma) {
+ if (host->req->stop) {
+ tifm_sd_exec(host, host->req->stop);
+ host->state = SCMD;
+ } else {
+ host->state = READY;
+ }
+ } else {
+ host->state = FIFO;
+ }
goto change_state;
}
break;
case FIFO:
if (host->flags & FIFO_RDY) {
- host->state = READY;
host->flags &= ~FIFO_RDY;
+ if (host->req->stop) {
+ tifm_sd_exec(host, host->req->stop);
+ host->state = SCMD;
+ } else {
+ host->state = READY;
+ }
goto change_state;
}
break;
case READY:
- queue_work(sock->wq, &host->cmd_handler);
+ tasklet_schedule(&host->finish_tasklet);
return;
}
- queue_delayed_work(sock->wq, &host->abort_handler,
- host->timeout_jiffies);
}
/* Called from interrupt handler */
-static unsigned int tifm_sd_signal_irq(struct tifm_dev *sock,
- unsigned int sock_irq_status)
+static void tifm_sd_signal_irq(struct tifm_dev *sock,
+ unsigned int sock_irq_status)
{
struct tifm_sd *host;
unsigned int host_status = 0, fifo_status = 0;
spin_lock(&sock->lock);
host = mmc_priv((struct mmc_host*)tifm_get_drvdata(sock));
- cancel_delayed_work(&host->abort_handler);
if (sock_irq_status & FIFO_EVENT) {
fifo_status = readl(sock->addr + SOCK_DMA_FIFO_STATUS);
host_status = readl(sock->addr + SOCK_MMCSD_STATUS);
writel(host_status, sock->addr + SOCK_MMCSD_STATUS);
- if (!(host->flags & HOST_REG))
- queue_work(sock->wq, &host->cmd_handler);
if (!host->req)
goto done;
if (host_status & TIFM_MMCSD_ERRMASK) {
if (host_status & TIFM_MMCSD_CERR)
error_code = MMC_ERR_FAILED;
- else if (host_status &
- (TIFM_MMCSD_CTO | TIFM_MMCSD_DTO))
+ else if (host_status
+ & (TIFM_MMCSD_CTO | TIFM_MMCSD_DTO))
error_code = MMC_ERR_TIMEOUT;
- else if (host_status &
- (TIFM_MMCSD_CCRC | TIFM_MMCSD_DCRC))
+ else if (host_status
+ & (TIFM_MMCSD_CCRC | TIFM_MMCSD_DCRC))
error_code = MMC_ERR_BADCRC;
writel(TIFM_FIFO_INT_SETALL,
if (host->req->stop) {
if (host->state == SCMD) {
host->req->stop->error = error_code;
- } else if(host->state == BRS) {
+ } else if (host->state == BRS
+ || host->state == CARD
+ || host->state == FIFO) {
host->req->cmd->error = error_code;
tifm_sd_exec(host, host->req->stop);
- queue_delayed_work(sock->wq,
- &host->abort_handler,
- host->timeout_jiffies);
host->state = SCMD;
goto done;
} else {
if (host_status & TIFM_MMCSD_CB)
host->flags |= CARD_BUSY;
- if ((host_status & TIFM_MMCSD_EOFB) &&
- (host->flags & CARD_BUSY)) {
+ if ((host_status & TIFM_MMCSD_EOFB)
+ && (host->flags & CARD_BUSY)) {
host->written_blocks++;
host->flags &= ~CARD_BUSY;
}
tifm_sd_process_cmd(sock, host, host_status);
done:
dev_dbg(&sock->dev, "host_status %x, fifo_status %x\n",
- host_status, fifo_status);
+ host_status, fifo_status);
spin_unlock(&sock->lock);
- return sock_irq_status;
}
-static void tifm_sd_prepare_data(struct tifm_sd *card, struct mmc_command *cmd)
+static void tifm_sd_prepare_data(struct tifm_sd *host, struct mmc_command *cmd)
{
- struct tifm_dev *sock = card->dev;
+ struct tifm_dev *sock = host->dev;
unsigned int dest_cnt;
/* DMA style IO */
-
+ dev_dbg(&sock->dev, "setting dma for %d blocks\n",
+ cmd->data->blocks);
writel(TIFM_FIFO_INT_SETALL,
- sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
writel(ilog2(cmd->data->blksz) - 2,
- sock->addr + SOCK_FIFO_PAGE_SIZE);
+ sock->addr + SOCK_FIFO_PAGE_SIZE);
writel(TIFM_FIFO_ENABLE, sock->addr + SOCK_FIFO_CONTROL);
writel(TIFM_FIFO_INTMASK, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
if (cmd->data->flags & MMC_DATA_WRITE) {
writel(TIFM_MMCSD_TXDE, sock->addr + SOCK_MMCSD_BUFFER_CONFIG);
writel(dest_cnt | TIFM_DMA_TX | TIFM_DMA_EN,
- sock->addr + SOCK_DMA_CONTROL);
+ sock->addr + SOCK_DMA_CONTROL);
} else {
writel(TIFM_MMCSD_RXDE, sock->addr + SOCK_MMCSD_BUFFER_CONFIG);
writel(dest_cnt | TIFM_DMA_EN, sock->addr + SOCK_DMA_CONTROL);
}
static void tifm_sd_set_data_timeout(struct tifm_sd *host,
- struct mmc_data *data)
+ struct mmc_data *data)
{
struct tifm_dev *sock = host->dev;
unsigned int data_timeout = data->timeout_clks;
return;
data_timeout += data->timeout_ns /
- ((1000000000 / host->clk_freq) * host->clk_div);
- data_timeout *= 10; // call it fudge factor for now
+ ((1000000000UL / host->clk_freq) * host->clk_div);
if (data_timeout < 0xffff) {
- writel((~TIFM_MMCSD_DPE) &
- readl(sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG),
- sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG);
writel(data_timeout, sock->addr + SOCK_MMCSD_DATA_TO);
+ writel((~TIFM_MMCSD_DPE)
+ & readl(sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG),
+ sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG);
} else {
- writel(TIFM_MMCSD_DPE |
- readl(sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG),
- sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG);
data_timeout = (data_timeout >> 10) + 1;
- if(data_timeout > 0xffff)
+ if (data_timeout > 0xffff)
data_timeout = 0; /* set to unlimited */
writel(data_timeout, sock->addr + SOCK_MMCSD_DATA_TO);
+ writel(TIFM_MMCSD_DPE
+ | readl(sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG),
+ sock->addr + SOCK_MMCSD_SDIO_MODE_CONFIG);
}
}
}
host->req = mrq;
+ mod_timer(&host->timer, jiffies + host->timeout_jiffies);
host->state = CMD;
- queue_delayed_work(sock->wq, &host->abort_handler,
- host->timeout_jiffies);
writel(TIFM_CTRL_LED | readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ sock->addr + SOCK_CONTROL);
tifm_sd_exec(host, mrq->cmd);
spin_unlock_irqrestore(&sock->lock, flags);
return;
mmc_request_done(mmc, mrq);
}
-static void tifm_sd_end_cmd(struct work_struct *work)
+static void tifm_sd_end_cmd(unsigned long data)
{
- struct tifm_sd *host = container_of(work, struct tifm_sd, cmd_handler);
+ struct tifm_sd *host = (struct tifm_sd*)data;
struct tifm_dev *sock = host->dev;
struct mmc_host *mmc = tifm_get_drvdata(sock);
struct mmc_request *mrq;
spin_lock_irqsave(&sock->lock, flags);
+ del_timer(&host->timer);
mrq = host->req;
host->req = NULL;
host->state = IDLE;
r_data = mrq->cmd->data;
if (r_data) {
if (r_data->flags & MMC_DATA_WRITE) {
- r_data->bytes_xfered = host->written_blocks *
- r_data->blksz;
+ r_data->bytes_xfered = host->written_blocks
+ * r_data->blksz;
} else {
r_data->bytes_xfered = r_data->blocks -
readl(sock->addr + SOCK_MMCSD_NUM_BLOCKS) - 1;
}
writel((~TIFM_CTRL_LED) & readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ sock->addr + SOCK_CONTROL);
spin_unlock_irqrestore(&sock->lock, flags);
mmc_request_done(mmc, mrq);
struct tifm_dev *sock = host->dev;
unsigned long flags;
struct mmc_data *r_data = mrq->cmd->data;
- char *t_buffer = NULL;
-
- if (r_data) {
- t_buffer = kmap(r_data->sg->page);
- if (!t_buffer) {
- printk(KERN_ERR DRIVER_NAME ": kmap failed\n");
- goto err_out;
- }
- }
spin_lock_irqsave(&sock->lock, flags);
if (host->flags & EJECT) {
if (r_data) {
tifm_sd_set_data_timeout(host, r_data);
- host->buffer = t_buffer + r_data->sg->offset;
- host->buffer_size = mrq->cmd->data->blocks *
- mrq->cmd->data->blksz;
+ host->buffer_size = mrq->cmd->data->blocks
+ * mrq->cmd->data->blksz;
- writel(TIFM_MMCSD_BUFINT |
- readl(sock->addr + SOCK_MMCSD_INT_ENABLE),
+ writel(TIFM_MMCSD_BUFINT
+ | readl(sock->addr + SOCK_MMCSD_INT_ENABLE),
sock->addr + SOCK_MMCSD_INT_ENABLE);
- writel(((TIFM_MMCSD_FIFO_SIZE - 1) << 8) |
- (TIFM_MMCSD_FIFO_SIZE - 1),
+ writel(((TIFM_MMCSD_FIFO_SIZE - 1) << 8)
+ | (TIFM_MMCSD_FIFO_SIZE - 1),
sock->addr + SOCK_MMCSD_BUFFER_CONFIG);
host->written_blocks = 0;
}
host->req = mrq;
+ mod_timer(&host->timer, jiffies + host->timeout_jiffies);
host->state = CMD;
- queue_delayed_work(sock->wq, &host->abort_handler,
- host->timeout_jiffies);
writel(TIFM_CTRL_LED | readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ sock->addr + SOCK_CONTROL);
tifm_sd_exec(host, mrq->cmd);
spin_unlock_irqrestore(&sock->lock, flags);
return;
err_out:
- if (t_buffer)
- kunmap(r_data->sg->page);
-
mrq->cmd->error = MMC_ERR_TIMEOUT;
mmc_request_done(mmc, mrq);
}
-static void tifm_sd_end_cmd_nodma(struct work_struct *work)
+static void tifm_sd_end_cmd_nodma(unsigned long data)
{
- struct tifm_sd *host = container_of(work, struct tifm_sd, cmd_handler);
+ struct tifm_sd *host = (struct tifm_sd*)data;
struct tifm_dev *sock = host->dev;
struct mmc_host *mmc = tifm_get_drvdata(sock);
struct mmc_request *mrq;
spin_lock_irqsave(&sock->lock, flags);
+ del_timer(&host->timer);
mrq = host->req;
host->req = NULL;
host->state = IDLE;
sock->addr + SOCK_MMCSD_INT_ENABLE);
if (r_data->flags & MMC_DATA_WRITE) {
- r_data->bytes_xfered = host->written_blocks *
- r_data->blksz;
+ r_data->bytes_xfered = host->written_blocks
+ * r_data->blksz;
} else {
r_data->bytes_xfered = r_data->blocks -
readl(sock->addr + SOCK_MMCSD_NUM_BLOCKS) - 1;
r_data->bytes_xfered += r_data->blksz -
readl(sock->addr + SOCK_MMCSD_BLOCK_LEN) + 1;
}
- host->buffer = NULL;
host->buffer_pos = 0;
host->buffer_size = 0;
}
writel((~TIFM_CTRL_LED) & readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ sock->addr + SOCK_CONTROL);
spin_unlock_irqrestore(&sock->lock, flags);
- if (r_data)
- kunmap(r_data->sg->page);
-
mmc_request_done(mmc, mrq);
}
-static void tifm_sd_abort(struct work_struct *work)
+static void tifm_sd_terminate(struct tifm_sd *host)
+{
+ struct tifm_dev *sock = host->dev;
+ unsigned long flags;
+
+ writel(0, sock->addr + SOCK_MMCSD_INT_ENABLE);
+ mmiowb();
+ spin_lock_irqsave(&sock->lock, flags);
+ host->flags |= EJECT;
+ if (host->req) {
+ writel(TIFM_FIFO_INT_SETALL,
+ sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
+ writel(0, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
+ tasklet_schedule(&host->finish_tasklet);
+ }
+ spin_unlock_irqrestore(&sock->lock, flags);
+}
+
+static void tifm_sd_abort(unsigned long data)
{
- struct tifm_sd *host =
- container_of(work, struct tifm_sd, abort_handler.work);
+ struct tifm_sd *host = (struct tifm_sd*)data;
printk(KERN_ERR DRIVER_NAME
- ": card failed to respond for a long period of time");
+ ": card failed to respond for a long period of time");
+
+ tifm_sd_terminate(host);
tifm_eject(host->dev);
}
writel(TIFM_MMCSD_4BBUS | readl(sock->addr + SOCK_MMCSD_CONFIG),
sock->addr + SOCK_MMCSD_CONFIG);
} else {
- writel((~TIFM_MMCSD_4BBUS) &
- readl(sock->addr + SOCK_MMCSD_CONFIG),
- sock->addr + SOCK_MMCSD_CONFIG);
+ writel((~TIFM_MMCSD_4BBUS)
+ & readl(sock->addr + SOCK_MMCSD_CONFIG),
+ sock->addr + SOCK_MMCSD_CONFIG);
}
if (ios->clock) {
if ((20000000 / clk_div1) > (24000000 / clk_div2)) {
host->clk_freq = 20000000;
host->clk_div = clk_div1;
- writel((~TIFM_CTRL_FAST_CLK) &
- readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ writel((~TIFM_CTRL_FAST_CLK)
+ & readl(sock->addr + SOCK_CONTROL),
+ sock->addr + SOCK_CONTROL);
} else {
host->clk_freq = 24000000;
host->clk_div = clk_div2;
- writel(TIFM_CTRL_FAST_CLK |
- readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
+ writel(TIFM_CTRL_FAST_CLK
+ | readl(sock->addr + SOCK_CONTROL),
+ sock->addr + SOCK_CONTROL);
}
} else {
host->clk_div = 0;
}
host->clk_div &= TIFM_MMCSD_CLKMASK;
- writel(host->clk_div | ((~TIFM_MMCSD_CLKMASK) &
- readl(sock->addr + SOCK_MMCSD_CONFIG)),
- sock->addr + SOCK_MMCSD_CONFIG);
+ writel(host->clk_div
+ | ((~TIFM_MMCSD_CLKMASK)
+ & readl(sock->addr + SOCK_MMCSD_CONFIG)),
+ sock->addr + SOCK_MMCSD_CONFIG);
if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN)
host->flags |= OPENDRAIN;
// allow removal.
if ((host->flags & EJECT) && ios->power_mode == MMC_POWER_OFF) {
host->flags |= EJECT_DONE;
- wake_up_all(&host->can_eject);
+ wake_up_all(&host->notify);
}
spin_unlock_irqrestore(&sock->lock, flags);
.get_ro = tifm_sd_ro
};
-static void tifm_sd_register_host(struct work_struct *work)
+static int tifm_sd_initialize_host(struct tifm_sd *host)
{
- struct tifm_sd *host = container_of(work, struct tifm_sd, cmd_handler);
+ int rc;
+ unsigned int host_status = 0;
struct tifm_dev *sock = host->dev;
- struct mmc_host *mmc = tifm_get_drvdata(sock);
- unsigned long flags;
- spin_lock_irqsave(&sock->lock, flags);
- host->flags |= HOST_REG;
- PREPARE_WORK(&host->cmd_handler,
- no_dma ? tifm_sd_end_cmd_nodma : tifm_sd_end_cmd);
- spin_unlock_irqrestore(&sock->lock, flags);
- dev_dbg(&sock->dev, "adding host\n");
- mmc_add_host(mmc);
+ writel(0, sock->addr + SOCK_MMCSD_INT_ENABLE);
+ mmiowb();
+ host->clk_div = 61;
+ host->clk_freq = 20000000;
+ writel(TIFM_MMCSD_RESET, sock->addr + SOCK_MMCSD_SYSTEM_CONTROL);
+ writel(host->clk_div | TIFM_MMCSD_POWER,
+ sock->addr + SOCK_MMCSD_CONFIG);
+
+ /* wait up to 0.51 sec for reset */
+ for (rc = 2; rc <= 256; rc <<= 1) {
+ if (1 & readl(sock->addr + SOCK_MMCSD_SYSTEM_STATUS)) {
+ rc = 0;
+ break;
+ }
+ msleep(rc);
+ }
+
+ if (rc) {
+ printk(KERN_ERR DRIVER_NAME
+ ": controller failed to reset\n");
+ return -ENODEV;
+ }
+
+ writel(0, sock->addr + SOCK_MMCSD_NUM_BLOCKS);
+ writel(host->clk_div | TIFM_MMCSD_POWER,
+ sock->addr + SOCK_MMCSD_CONFIG);
+ writel(TIFM_MMCSD_RXDE, sock->addr + SOCK_MMCSD_BUFFER_CONFIG);
+
+ // command timeout fixed to 64 clocks for now
+ writel(64, sock->addr + SOCK_MMCSD_COMMAND_TO);
+ writel(TIFM_MMCSD_INAB, sock->addr + SOCK_MMCSD_COMMAND);
+
+ /* INAB should take much less than reset */
+ for (rc = 1; rc <= 16; rc <<= 1) {
+ host_status = readl(sock->addr + SOCK_MMCSD_STATUS);
+ writel(host_status, sock->addr + SOCK_MMCSD_STATUS);
+ if (!(host_status & TIFM_MMCSD_ERRMASK)
+ && (host_status & TIFM_MMCSD_EOC)) {
+ rc = 0;
+ break;
+ }
+ msleep(rc);
+ }
+
+ if (rc) {
+ printk(KERN_ERR DRIVER_NAME
+ ": card not ready - probe failed on initialization\n");
+ return -ENODEV;
+ }
+
+ writel(TIFM_MMCSD_DATAMASK | TIFM_MMCSD_ERRMASK,
+ sock->addr + SOCK_MMCSD_INT_ENABLE);
+ mmiowb();
+
+ return 0;
}
static int tifm_sd_probe(struct tifm_dev *sock)
struct tifm_sd *host;
int rc = -EIO;
- if (!(TIFM_SOCK_STATE_OCCUPIED &
- readl(sock->addr + SOCK_PRESENT_STATE))) {
+ if (!(TIFM_SOCK_STATE_OCCUPIED
+ & readl(sock->addr + SOCK_PRESENT_STATE))) {
printk(KERN_WARNING DRIVER_NAME ": card gone, unexpectedly\n");
return rc;
}
return -ENOMEM;
host = mmc_priv(mmc);
- host->dev = sock;
- host->clk_div = 61;
- init_waitqueue_head(&host->can_eject);
- INIT_WORK(&host->cmd_handler, tifm_sd_register_host);
- INIT_DELAYED_WORK(&host->abort_handler, tifm_sd_abort);
-
tifm_set_drvdata(sock, mmc);
- sock->signal_irq = tifm_sd_signal_irq;
-
- host->clk_freq = 20000000;
+ host->dev = sock;
host->timeout_jiffies = msecs_to_jiffies(1000);
+ init_waitqueue_head(&host->notify);
+ tasklet_init(&host->finish_tasklet,
+ no_dma ? tifm_sd_end_cmd_nodma : tifm_sd_end_cmd,
+ (unsigned long)host);
+ setup_timer(&host->timer, tifm_sd_abort, (unsigned long)host);
+
tifm_sd_ops.request = no_dma ? tifm_sd_request_nodma : tifm_sd_request;
mmc->ops = &tifm_sd_ops;
mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
- mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_MULTIWRITE;
mmc->f_min = 20000000 / 60;
mmc->f_max = 24000000;
mmc->max_hw_segs = 1;
mmc->max_phys_segs = 1;
- mmc->max_sectors = 127;
- mmc->max_seg_size = mmc->max_sectors << 11; //2k maximum hw block length
-
- writel(0, sock->addr + SOCK_MMCSD_INT_ENABLE);
- writel(TIFM_MMCSD_RESET, sock->addr + SOCK_MMCSD_SYSTEM_CONTROL);
- writel(host->clk_div | TIFM_MMCSD_POWER,
- sock->addr + SOCK_MMCSD_CONFIG);
+ // limited by DMA counter - it's safer to stick with
+ // block counter has 11 bits though
+ mmc->max_blk_count = 256;
+ // 2k maximum hw block length
+ mmc->max_blk_size = 2048;
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
+ sock->signal_irq = tifm_sd_signal_irq;
+ rc = tifm_sd_initialize_host(host);
- for (rc = 0; rc < 50; rc++) {
- /* Wait for reset ack */
- if (1 & readl(sock->addr + SOCK_MMCSD_SYSTEM_STATUS)) {
- rc = 0;
- break;
- }
- msleep(10);
- }
+ if (!rc)
+ rc = mmc_add_host(mmc);
+ if (rc)
+ goto out_free_mmc;
- if (rc) {
- printk(KERN_ERR DRIVER_NAME
- ": card not ready - probe failed\n");
- mmc_free_host(mmc);
- return -ENODEV;
- }
+ return 0;
+out_free_mmc:
+ mmc_free_host(mmc);
+ return rc;
+}
- writel(0, sock->addr + SOCK_MMCSD_NUM_BLOCKS);
- writel(host->clk_div | TIFM_MMCSD_POWER,
- sock->addr + SOCK_MMCSD_CONFIG);
- writel(TIFM_MMCSD_RXDE, sock->addr + SOCK_MMCSD_BUFFER_CONFIG);
- writel(TIFM_MMCSD_DATAMASK | TIFM_MMCSD_ERRMASK,
- sock->addr + SOCK_MMCSD_INT_ENABLE);
+static void tifm_sd_remove(struct tifm_dev *sock)
+{
+ struct mmc_host *mmc = tifm_get_drvdata(sock);
+ struct tifm_sd *host = mmc_priv(mmc);
- writel(64, sock->addr + SOCK_MMCSD_COMMAND_TO); // command timeout 64 clocks for now
- writel(TIFM_MMCSD_INAB, sock->addr + SOCK_MMCSD_COMMAND);
- writel(host->clk_div | TIFM_MMCSD_POWER,
- sock->addr + SOCK_MMCSD_CONFIG);
+ del_timer_sync(&host->timer);
+ tifm_sd_terminate(host);
+ wait_event_timeout(host->notify, host->flags & EJECT_DONE,
+ host->timeout_jiffies);
+ tasklet_kill(&host->finish_tasklet);
+ mmc_remove_host(mmc);
- queue_delayed_work(sock->wq, &host->abort_handler,
- host->timeout_jiffies);
+ /* The meaning of the bit majority in this constant is unknown. */
+ writel(0xfff8 & readl(sock->addr + SOCK_CONTROL),
+ sock->addr + SOCK_CONTROL);
- return 0;
+ tifm_set_drvdata(sock, NULL);
+ mmc_free_host(mmc);
}
-static int tifm_sd_host_is_down(struct tifm_dev *sock)
+#ifdef CONFIG_PM
+
+static int tifm_sd_suspend(struct tifm_dev *sock, pm_message_t state)
{
struct mmc_host *mmc = tifm_get_drvdata(sock);
- struct tifm_sd *host = mmc_priv(mmc);
- unsigned long flags;
- int rc = 0;
+ int rc;
- spin_lock_irqsave(&sock->lock, flags);
- rc = (host->flags & EJECT_DONE);
- spin_unlock_irqrestore(&sock->lock, flags);
+ rc = mmc_suspend_host(mmc, state);
+ /* The meaning of the bit majority in this constant is unknown. */
+ writel(0xfff8 & readl(sock->addr + SOCK_CONTROL),
+ sock->addr + SOCK_CONTROL);
return rc;
}
-static void tifm_sd_remove(struct tifm_dev *sock)
+static int tifm_sd_resume(struct tifm_dev *sock)
{
struct mmc_host *mmc = tifm_get_drvdata(sock);
struct tifm_sd *host = mmc_priv(mmc);
- unsigned long flags;
- spin_lock_irqsave(&sock->lock, flags);
- host->flags |= EJECT;
- if (host->req)
- queue_work(sock->wq, &host->cmd_handler);
- spin_unlock_irqrestore(&sock->lock, flags);
- wait_event_timeout(host->can_eject, tifm_sd_host_is_down(sock),
- host->timeout_jiffies);
+ if (sock->media_id != FM_SD
+ || tifm_sd_initialize_host(host)) {
+ tifm_eject(sock);
+ return 0;
+ } else {
+ return mmc_resume_host(mmc);
+ }
+}
- if (host->flags & HOST_REG)
- mmc_remove_host(mmc);
+#else
- /* The meaning of the bit majority in this constant is unknown. */
- writel(0xfff8 & readl(sock->addr + SOCK_CONTROL),
- sock->addr + SOCK_CONTROL);
- writel(0, sock->addr + SOCK_MMCSD_INT_ENABLE);
- writel(TIFM_FIFO_INT_SETALL,
- sock->addr + SOCK_DMA_FIFO_INT_ENABLE_CLEAR);
- writel(0, sock->addr + SOCK_DMA_FIFO_INT_ENABLE_SET);
+#define tifm_sd_suspend NULL
+#define tifm_sd_resume NULL
- tifm_set_drvdata(sock, NULL);
- mmc_free_host(mmc);
-}
+#endif /* CONFIG_PM */
static tifm_media_id tifm_sd_id_tbl[] = {
FM_SD, 0
},
.id_table = tifm_sd_id_tbl,
.probe = tifm_sd_probe,
- .remove = tifm_sd_remove
+ .remove = tifm_sd_remove,
+ .suspend = tifm_sd_suspend,
+ .resume = tifm_sd_resume
};
static int __init tifm_sd_init(void)
/*
* linux/drivers/mmc/wbsd.c - Winbond W83L51xD SD/MMC driver
*
- * Copyright (C) 2004-2005 Pierre Ossman, All Rights Reserved.
+ * Copyright (C) 2004-2006 Pierre Ossman, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
return host->num_sg;
}
-static inline char *wbsd_kmap_sg(struct wbsd_host *host)
+static inline char *wbsd_sg_to_buffer(struct wbsd_host *host)
{
- host->mapped_sg = kmap_atomic(host->cur_sg->page, KM_BIO_SRC_IRQ) +
- host->cur_sg->offset;
- return host->mapped_sg;
-}
-
-static inline void wbsd_kunmap_sg(struct wbsd_host *host)
-{
- kunmap_atomic(host->mapped_sg, KM_BIO_SRC_IRQ);
+ return page_address(host->cur_sg->page) + host->cur_sg->offset;
}
static inline void wbsd_sg_to_dma(struct wbsd_host *host, struct mmc_data *data)
* we do not transfer too much.
*/
for (i = 0; i < len; i++) {
- sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset;
+ sgbuf = page_address(sg[i].page) + sg[i].offset;
if (size < sg[i].length)
memcpy(dmabuf, sgbuf, size);
else
memcpy(dmabuf, sgbuf, sg[i].length);
- kunmap_atomic(sgbuf, KM_BIO_SRC_IRQ);
dmabuf += sg[i].length;
if (size < sg[i].length)
* we do not transfer too much.
*/
for (i = 0; i < len; i++) {
- sgbuf = kmap_atomic(sg[i].page, KM_BIO_SRC_IRQ) + sg[i].offset;
+ sgbuf = page_address(sg[i].page) + sg[i].offset;
if (size < sg[i].length)
memcpy(sgbuf, dmabuf, size);
else
if (data->bytes_xfered == host->size)
return;
- buffer = wbsd_kmap_sg(host) + host->offset;
+ buffer = wbsd_sg_to_buffer(host) + host->offset;
/*
* Drain the fifo. This has a tendency to loop longer
/*
* Transfer done?
*/
- if (data->bytes_xfered == host->size) {
- wbsd_kunmap_sg(host);
+ if (data->bytes_xfered == host->size)
return;
- }
/*
* End of scatter list entry?
*/
if (host->remain == 0) {
- wbsd_kunmap_sg(host);
-
/*
* Get next entry. Check if last.
*/
return;
}
- buffer = wbsd_kmap_sg(host);
+ buffer = wbsd_sg_to_buffer(host);
}
}
}
- wbsd_kunmap_sg(host);
-
/*
* This is a very dirty hack to solve a
* hardware problem. The chip doesn't trigger
if (data->bytes_xfered == host->size)
return;
- buffer = wbsd_kmap_sg(host) + host->offset;
+ buffer = wbsd_sg_to_buffer(host) + host->offset;
/*
* Fill the fifo. This has a tendency to loop longer
/*
* Transfer done?
*/
- if (data->bytes_xfered == host->size) {
- wbsd_kunmap_sg(host);
+ if (data->bytes_xfered == host->size)
return;
- }
/*
* End of scatter list entry?
*/
if (host->remain == 0) {
- wbsd_kunmap_sg(host);
-
/*
* Get next entry. Check if last.
*/
return;
}
- buffer = wbsd_kmap_sg(host);
+ buffer = wbsd_sg_to_buffer(host);
}
}
}
- wbsd_kunmap_sg(host);
-
/*
* The controller stops sending interrupts for
* 'FIFO empty' under certain conditions. So we
* transfered.
*/
if (cmd->data && (cmd->error == MMC_ERR_NONE)) {
+ /*
+ * The hardware is so delightfully stupid that it has a list
+ * of "data" commands. If a command isn't on this list, it'll
+ * just go back to the idle state and won't send any data
+ * interrupts.
+ */
+ switch (cmd->opcode) {
+ case 11:
+ case 17:
+ case 18:
+ case 20:
+ case 24:
+ case 25:
+ case 26:
+ case 27:
+ case 30:
+ case 42:
+ case 56:
+ break;
+
+ /* ACMDs. We don't keep track of state, so we just treat them
+ * like any other command. */
+ case 51:
+ break;
+
+ default:
+#ifdef CONFIG_MMC_DEBUG
+ printk(KERN_WARNING "%s: Data command %d is not "
+ "supported by this controller.\n",
+ mmc_hostname(host->mmc), cmd->opcode);
+#endif
+ cmd->data->error = MMC_ERR_INVALID;
+
+ if (cmd->data->stop)
+ wbsd_send_command(host, cmd->data->stop);
+
+ goto done;
+ };
+
/*
* Dirty fix for hardware bug.
*/
mmc->max_phys_segs = 128;
/*
- * Maximum number of sectors in one transfer. Also limited by 64kB
- * buffer.
+ * Maximum request size. Also limited by 64KiB buffer.
*/
- mmc->max_sectors = 128;
+ mmc->max_req_size = 65536;
/*
* Maximum segment size. Could be one segment with the maximum number
- * of segments.
+ * of bytes.
+ */
+ mmc->max_seg_size = mmc->max_req_size;
+
+ /*
+ * Maximum block size. We have 12 bits (= 4095) but have to subtract
+ * space for CRC. So the maximum is 4095 - 4*2 = 4087.
+ */
+ mmc->max_blk_size = 4087;
+
+ /*
+ * Maximum block count. There is no real limit so the maximum
+ * request size will be the only restriction.
*/
- mmc->max_seg_size = mmc->max_sectors * 512;
+ mmc->max_blk_count = mmc->max_req_size;
dev_set_drvdata(dev, mmc);
struct scatterlist* cur_sg; /* Current SG entry */
unsigned int num_sg; /* Number of entries left */
- void* mapped_sg; /* vaddr of mapped sg */
unsigned int offset; /* Offset into current entry */
unsigned int remain; /* Data left in curren entry */
{
struct vortex_private *vp = netdev_priv(dev);
unsigned long flags;
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
(vp->full_bus_master_rx ? boomerang_interrupt:vortex_interrupt)(dev->irq,dev);
local_irq_restore(flags);
}
config MACB
tristate "Atmel MACB support"
- depends on NET_ETHERNET && AVR32
+ depends on NET_ETHERNET && (AVR32 || ARCH_AT91SAM9260 || ARCH_AT91SAM9263)
select MII
help
The Atmel MACB ethernet interface is found on many AT32 and AT91
To compile this driver as a module, choose M here: the module
will be called bmac.
-config OAKNET
- tristate "National DP83902AV (Oak ethernet) support"
- depends on NET_ETHERNET && PPC && BROKEN
- select CRC32
- help
- Say Y if your machine has this type of Ethernet network card.
-
- To compile this driver as a module, choose M here: the module
- will be called oaknet.
-
config ARIADNE
tristate "Ariadne support"
depends on NET_ETHERNET && ZORRO
<file:Documentation/networking/net-modules.txt>. The module
will be called seeq8005.
-config SKMC
- tristate "SKnet MCA support"
- depends on NET_ETHERNET && MCA && BROKEN
- ---help---
- These are Micro Channel Ethernet adapters. You need to say Y to "MCA
- support" in order to use this driver. Supported cards are the SKnet
- Junior MC2 and the SKnet MC2(+). The driver automatically
- distinguishes between the two cards. Note that using multiple boards
- of different type hasn't been tested with this driver. Say Y if you
- have one of these Ethernet adapters.
-
- To compile this driver as a module, choose M here and read
- <file:Documentation/networking/net-modules.txt>. The module
- will be called sk_mca.
-
config NE2_MCA
tristate "NE/2 (ne2000 MCA version) support"
depends on NET_ETHERNET && MCA_LEGACY
workstations.
See <http://www.semiconductors.philips.com/pip/SAA9730_flyer_1>.
+config SC92031
+ tristate "Silan SC92031 PCI Fast Ethernet Adapter driver (EXPERIMENTAL)"
+ depends on NET_PCI && PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the Silan SC92031 chip (sometimes also called Rsltek 8139D). If you
+ have one of these, say Y here.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sc92031. This is recommended.
+
config NET_POCKET
bool "Pocket and portable adapters"
depends on NET_ETHERNET && PARPORT
NAPI is a driver API designed to reduce CPU and interrupt load
when the driver is receiving lots of packets from the card.
+config CHELSIO_T3
+ tristate "Chelsio Communications T3 10Gb Ethernet support"
+ depends on PCI
+ help
+ This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
+ adapters.
+
+ For general information about Chelsio and our products, visit
+ our website at <http://www.chelsio.com>.
+
+ For customer support, please visit our customer support page at
+ <http://www.chelsio.com/support.htm>.
+
+ Please send feedback to <linux-bugs@chelsio.com>.
+
+ To compile this driver as a module, choose M here: the module
+ will be called cxgb3.
+
config EHEA
tristate "eHEA Ethernet support"
depends on IBMEBUS
help
This enables the support for NetXen's Gigabit Ethernet card.
+config PASEMI_MAC
+ tristate "PA Semi 1/10Gbit MAC"
+ depends on PPC64 && PCI
+ help
+ This driver supports the on-chip 1/10Gbit Ethernet controller on
+ PA Semi's PWRficient line of chips.
+
endmenu
source "drivers/net/tokenring/Kconfig"
config SKFP
tristate "SysKonnect FDDI PCI support"
depends on FDDI && PCI
+ select BITREVERSE
---help---
Say Y here if you have a SysKonnect FDDI PCI adapter.
The following adapters are supported by this driver:
obj-$(CONFIG_IBM_EMAC) += ibm_emac/
obj-$(CONFIG_IXGB) += ixgb/
obj-$(CONFIG_CHELSIO_T1) += chelsio/
+obj-$(CONFIG_CHELSIO_T3) += cxgb3/
obj-$(CONFIG_EHEA) += ehea/
obj-$(CONFIG_BONDING) += bonding/
obj-$(CONFIG_GIANFAR) += gianfar_driver.o
obj-$(CONFIG_MACE) += mace.o
obj-$(CONFIG_BMAC) += bmac.o
-obj-$(CONFIG_OAKNET) += oaknet.o 8390.o
-
obj-$(CONFIG_DGRS) += dgrs.o
obj-$(CONFIG_VORTEX) += 3c59x.o
obj-$(CONFIG_TYPHOON) += typhoon.o
obj-$(CONFIG_EL1) += 3c501.o
obj-$(CONFIG_EL16) += 3c507.o
obj-$(CONFIG_ELMC) += 3c523.o
-obj-$(CONFIG_SKMC) += sk_mca.o
obj-$(CONFIG_IBMLANA) += ibmlana.o
obj-$(CONFIG_ELMC_II) += 3c527.o
obj-$(CONFIG_EL3) += 3c509.o
obj-$(CONFIG_LASI_82596) += lasi_82596.o
obj-$(CONFIG_MVME16x_NET) += 82596.o
obj-$(CONFIG_BVME6000_NET) += 82596.o
+obj-$(CONFIG_SC92031) += sc92031.o
# This is also a 82596 and should probably be merged
obj-$(CONFIG_LP486E) += lp486e.o
obj-$(CONFIG_SMC911X) += smc911x.o
obj-$(CONFIG_DM9000) += dm9000.o
obj-$(CONFIG_FEC_8XX) += fec_8xx/
+obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
obj-$(CONFIG_MACB) += macb.o
extern struct net_device *arlan_probe(int unit);
extern struct net_device *el16_probe(int unit);
extern struct net_device *elmc_probe(int unit);
-extern struct net_device *skmca_probe(int unit);
extern struct net_device *elplus_probe(int unit);
extern struct net_device *ac3200_probe(int unit);
extern struct net_device *es_probe(int unit);
#endif
#ifdef CONFIG_ELMC_II /* 3c527 */
{mc32_probe, 0},
-#endif
-#ifdef CONFIG_SKMC /* SKnet Microchannel */
- {skmca_probe, 0},
#endif
{NULL, 0},
};
static void amd8111e_poll(struct net_device *dev)
{
unsigned long flags;
- local_save_flags(flags);
- local_irq_disable();
+ local_irq_save(flags);
amd8111e_interrupt(0, dev);
local_irq_restore(flags);
}
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info));
+ strlcpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
}
static const struct ethtool_ops at91ether_ethtool_ops = {
{
strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
strlcpy(info->version, DRV_VERSION, sizeof(info->version));
- strlcpy(info->bus_info, dev->class_dev.dev->bus_id,
+ strlcpy(info->bus_info, dev->dev.parent->bus_id,
sizeof(info->bus_info));
}
struct ring_info *src_map, *dest_map;
struct rx_header *rh;
int dest_idx;
- u32 ctrl;
+ __le32 ctrl;
dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
dest_desc = &bp->rx_ring[dest_idx];
RX_PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
rh = (struct rx_header *) skb->data;
- len = cpu_to_le16(rh->len);
+ len = le16_to_cpu(rh->len);
if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
(rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
drop_it:
do {
udelay(2);
barrier();
- len = cpu_to_le16(rh->len);
+ len = le16_to_cpu(rh->len);
} while (len == 0 && i++ < 5);
if (len == 0)
goto drop_it;
static int b44_read_eeprom(struct b44 *bp, u8 *data)
{
long i;
- u16 *ptr = (u16 *) data;
+ __le16 *ptr = (__le16 *) data;
for (i = 0; i < 128; i += 2)
ptr[i / 2] = cpu_to_le16(readw(bp->regs + 4096 + i));
#define MII_TLEDCTRL_ENABLE 0x0040
struct dma_desc {
- u32 ctrl;
- u32 addr;
+ __le32 ctrl;
+ __le32 addr;
};
/* There are only 12 bits in the DMA engine for descriptor offsetting
#define RX_COPY_THRESHOLD 256
struct rx_header {
- u16 len;
- u16 flags;
- u16 pad[12];
+ __le16 len;
+ __le16 flags;
+ __le16 pad[12];
};
#define RX_HEADER_LEN 28
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/crc32.h>
+#include <linux/bitrev.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
+ (N_RX_RING + N_TX_RING + 4) * sizeof(struct dbdma_cmd) \
+ sizeof(struct sk_buff_head))
-static unsigned char bitrev(unsigned char b);
static int bmac_open(struct net_device *dev);
static int bmac_close(struct net_device *dev);
static int bmac_transmit_packet(struct sk_buff *skb, struct net_device *dev);
virt_to_bus(addr), 0);
}
-/* Bit-reverse one byte of an ethernet hardware address. */
-static unsigned char
-bitrev(unsigned char b)
-{
- int d = 0, i;
-
- for (i = 0; i < 8; ++i, b >>= 1)
- d = (d << 1) | (b & 1);
- return d;
-}
-
-
static void
bmac_init_tx_ring(struct bmac_data *bp)
{
{
reset_and_select_srom(dev);
data = read_srom(dev, i + EnetAddressOffset/2, SROMAddressBits);
- ea[2*i] = bitrev(data & 0x0ff);
- ea[2*i+1] = bitrev((data >> 8) & 0x0ff);
+ ea[2*i] = bitrev8(data & 0x0ff);
+ ea[2*i+1] = bitrev8((data >> 8) & 0x0ff);
}
}
rev = addr[0] == 0 && addr[1] == 0xA0;
for (j = 0; j < 6; ++j)
- dev->dev_addr[j] = rev? bitrev(addr[j]): addr[j];
+ dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
/* Enable chip without interrupts for now */
bmac_enable_and_reset_chip(dev);
#include <linux/if_vlan.h>
#define BCM_VLAN 1
#endif
-#ifdef NETIF_F_TSO
#include <net/ip.h>
#include <net/tcp.h>
#include <net/checksum.h>
-#define BCM_TSO 1
-#endif
#include <linux/workqueue.h>
#include <linux/crc32.h>
#include <linux/prefetch.h>
tx_buf = &bp->tx_buf_ring[sw_ring_cons];
skb = tx_buf->skb;
-#ifdef BCM_TSO
+
/* partial BD completions possible with TSO packets */
if (skb_is_gso(skb)) {
u16 last_idx, last_ring_idx;
break;
}
}
-#endif
+
pci_unmap_single(bp->pdev, pci_unmap_addr(tx_buf, mapping),
skb_headlen(skb), PCI_DMA_TODEVICE);
vlan_tag_flags |=
(TX_BD_FLAGS_VLAN_TAG | (vlan_tx_tag_get(skb) << 16));
}
-#ifdef BCM_TSO
if ((mss = skb_shinfo(skb)->gso_size) &&
(skb->len > (bp->dev->mtu + ETH_HLEN))) {
u32 tcp_opt_len, ip_tcp_len;
}
}
else
-#endif
{
mss = 0;
}
.set_tx_csum = ethtool_op_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
-#ifdef BCM_TSO
.get_tso = ethtool_op_get_tso,
.set_tso = bnx2_set_tso,
-#endif
.self_test_count = bnx2_self_test_count,
.self_test = bnx2_self_test,
.get_strings = bnx2_get_strings,
* responding after a while.
*
* AMD believes this incompatibility is unique to the 5706, and
- * prefers to locally disable MSI rather than globally disabling it
- * using pci_msi_quirk.
+ * prefers to locally disable MSI rather than globally disabling it.
*/
if (CHIP_NUM(bp) == CHIP_NUM_5706 && disable_msi == 0) {
struct pci_dev *amd_8132 = NULL;
#ifdef BCM_VLAN
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
#endif
-#ifdef BCM_TSO
dev->features |= NETIF_F_TSO | NETIF_F_TSO_ECN;
-#endif
netif_carrier_off(bp->dev);
static struct lock_class_key bonding_netdev_xmit_lock_key;
/* Create a new bond based on the specified name and bonding parameters.
+ * If name is NULL, obtain a suitable "bond%d" name for us.
* Caller must NOT hold rtnl_lock; we need to release it here before we
* set up our sysfs entries.
*/
int res;
rtnl_lock();
- bond_dev = alloc_netdev(sizeof(struct bonding), name, ether_setup);
+ bond_dev = alloc_netdev(sizeof(struct bonding), name ? name : "",
+ ether_setup);
if (!bond_dev) {
printk(KERN_ERR DRV_NAME
": %s: eek! can't alloc netdev!\n",
goto out_rtnl;
}
+ if (!name) {
+ res = dev_alloc_name(bond_dev, "bond%d");
+ if (res < 0)
+ goto out_netdev;
+ }
+
/* bond_init() must be called after dev_alloc_name() (for the
* /proc files), but before register_netdevice(), because we
* need to set function pointers.
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(bond_dev->priv);
- goto done;
+ if (res < 0) {
+ rtnl_lock();
+ goto out_bond;
+ }
+
+ return 0;
+
out_bond:
bond_deinit(bond_dev);
out_netdev:
free_netdev(bond_dev);
out_rtnl:
rtnl_unlock();
-done:
return res;
}
{
int i;
int res;
- char new_bond_name[8]; /* Enough room for 999 bonds at init. */
printk(KERN_INFO "%s", version);
bond_create_proc_dir();
#endif
for (i = 0; i < max_bonds; i++) {
- sprintf(new_bond_name, "bond%d",i);
- res = bond_create(new_bond_name,&bonding_defaults, NULL);
+ res = bond_create(NULL, &bonding_defaults, NULL);
if (res)
goto err;
}
/* #define BONDING_DEBUG 1 */
#include "bonding.h"
-#define to_class_dev(obj) container_of(obj,struct class_device,kobj)
-#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+#define to_dev(obj) container_of(obj,struct device,kobj)
#define to_bond(cd) ((struct bonding *)(to_net_dev(cd)->priv))
/*---------------------------- Declarations -------------------------------*/
* If it's > expected, then there's a file open,
* and we have to fail.
*/
- if (atomic_read(&bond->dev->class_dev.kobj.kref.refcount)
+ if (atomic_read(&bond->dev->dev.kobj.kref.refcount)
> expected_refcount){
rtnl_unlock();
printk(KERN_INFO DRV_NAME
int ret = 0;
/* first, create a link from the slave back to the master */
- ret = sysfs_create_link(&(slave->class_dev.kobj), &(master->class_dev.kobj),
+ ret = sysfs_create_link(&(slave->dev.kobj), &(master->dev.kobj),
"master");
if (ret)
return ret;
/* next, create a link from the master to the slave */
sprintf(linkname,"slave_%s",slave->name);
- ret = sysfs_create_link(&(master->class_dev.kobj), &(slave->class_dev.kobj),
+ ret = sysfs_create_link(&(master->dev.kobj), &(slave->dev.kobj),
linkname);
return ret;
{
char linkname[IFNAMSIZ+7];
- sysfs_remove_link(&(slave->class_dev.kobj), "master");
+ sysfs_remove_link(&(slave->dev.kobj), "master");
sprintf(linkname,"slave_%s",slave->name);
- sysfs_remove_link(&(master->class_dev.kobj), linkname);
+ sysfs_remove_link(&(master->dev.kobj), linkname);
}
/*
* Show the slaves in the current bond.
*/
-static ssize_t bonding_show_slaves(struct class_device *cd, char *buf)
+static ssize_t bonding_show_slaves(struct device *d,
+ struct device_attribute *attr, char *buf)
{
struct slave *slave;
int i, res = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
read_lock_bh(&bond->lock);
bond_for_each_slave(bond, slave, i) {
* up for this to succeed.
* This function is largely the same flow as bonding_update_bonds().
*/
-static ssize_t bonding_store_slaves(struct class_device *cd, const char *buffer, size_t count)
+static ssize_t bonding_store_slaves(struct device *d,
+ struct device_attribute *attr,
+ const char *buffer, size_t count)
{
char command[IFNAMSIZ + 1] = { 0, };
char *ifname;
int i, res, found, ret = count;
struct slave *slave;
struct net_device *dev = NULL;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
/* Quick sanity check -- is the bond interface up? */
if (!(bond->dev->flags & IFF_UP)) {
return ret;
}
-static CLASS_DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves);
+static DEVICE_ATTR(slaves, S_IRUGO | S_IWUSR, bonding_show_slaves, bonding_store_slaves);
/*
* Show and set the bonding mode. The bond interface must be down to
* change the mode.
*/
-static ssize_t bonding_show_mode(struct class_device *cd, char *buf)
+static ssize_t bonding_show_mode(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%s %d\n",
bond_mode_tbl[bond->params.mode].modename,
bond->params.mode) + 1;
}
-static ssize_t bonding_store_mode(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_mode(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode);
+static DEVICE_ATTR(mode, S_IRUGO | S_IWUSR, bonding_show_mode, bonding_store_mode);
/*
* Show and set the bonding transmit hash method. The bond interface must be down to
* change the xmit hash policy.
*/
-static ssize_t bonding_show_xmit_hash(struct class_device *cd, char *buf)
+static ssize_t bonding_show_xmit_hash(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if ((bond->params.mode != BOND_MODE_XOR) &&
(bond->params.mode != BOND_MODE_8023AD)) {
return count;
}
-static ssize_t bonding_store_xmit_hash(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_xmit_hash(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash);
+static DEVICE_ATTR(xmit_hash_policy, S_IRUGO | S_IWUSR, bonding_show_xmit_hash, bonding_store_xmit_hash);
/*
* Show and set arp_validate.
*/
-static ssize_t bonding_show_arp_validate(struct class_device *cd, char *buf)
+static ssize_t bonding_show_arp_validate(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%s %d\n",
arp_validate_tbl[bond->params.arp_validate].modename,
bond->params.arp_validate) + 1;
}
-static ssize_t bonding_store_arp_validate(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_arp_validate(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
new_value = bond_parse_parm((char *)buf, arp_validate_tbl);
if (new_value < 0) {
return count;
}
-static CLASS_DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate);
+static DEVICE_ATTR(arp_validate, S_IRUGO | S_IWUSR, bonding_show_arp_validate, bonding_store_arp_validate);
/*
* Show and set the arp timer interval. There are two tricky bits
* MII monitoring. Second, if the ARP timer isn't running, we must
* start it.
*/
-static ssize_t bonding_show_arp_interval(struct class_device *cd, char *buf)
+static ssize_t bonding_show_arp_interval(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.arp_interval) + 1;
}
-static ssize_t bonding_store_arp_interval(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_arp_interval(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval);
+static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR , bonding_show_arp_interval, bonding_store_arp_interval);
/*
* Show and set the arp targets.
*/
-static ssize_t bonding_show_arp_targets(struct class_device *cd, char *buf)
+static ssize_t bonding_show_arp_targets(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int i, res = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
for (i = 0; i < BOND_MAX_ARP_TARGETS; i++) {
if (bond->params.arp_targets[i])
return res;
}
-static ssize_t bonding_store_arp_targets(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_arp_targets(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
u32 newtarget;
int i = 0, done = 0, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
u32 *targets;
targets = bond->params.arp_targets;
out:
return ret;
}
-static CLASS_DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets);
+static DEVICE_ATTR(arp_ip_target, S_IRUGO | S_IWUSR , bonding_show_arp_targets, bonding_store_arp_targets);
/*
* Show and set the up and down delays. These must be multiples of the
* MII monitoring value, and are stored internally as the multiplier.
* Thus, we must translate to MS for the real world.
*/
-static ssize_t bonding_show_downdelay(struct class_device *cd, char *buf)
+static ssize_t bonding_show_downdelay(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.downdelay * bond->params.miimon) + 1;
}
-static ssize_t bonding_store_downdelay(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_downdelay(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay);
+static DEVICE_ATTR(downdelay, S_IRUGO | S_IWUSR , bonding_show_downdelay, bonding_store_downdelay);
-static ssize_t bonding_show_updelay(struct class_device *cd, char *buf)
+static ssize_t bonding_show_updelay(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.updelay * bond->params.miimon) + 1;
}
-static ssize_t bonding_store_updelay(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_updelay(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (!(bond->params.miimon)) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay);
+static DEVICE_ATTR(updelay, S_IRUGO | S_IWUSR , bonding_show_updelay, bonding_store_updelay);
/*
* Show and set the LACP interval. Interface must be down, and the mode
* must be set to 802.3ad mode.
*/
-static ssize_t bonding_show_lacp(struct class_device *cd, char *buf)
+static ssize_t bonding_show_lacp(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%s %d\n",
bond_lacp_tbl[bond->params.lacp_fast].modename,
bond->params.lacp_fast) + 1;
}
-static ssize_t bonding_store_lacp(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_lacp(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->dev->flags & IFF_UP) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
+static DEVICE_ATTR(lacp_rate, S_IRUGO | S_IWUSR, bonding_show_lacp, bonding_store_lacp);
/*
* Show and set the MII monitor interval. There are two tricky bits
* ARP monitoring. Second, if the timer isn't running, we must
* start it.
*/
-static ssize_t bonding_show_miimon(struct class_device *cd, char *buf)
+static ssize_t bonding_show_miimon(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.miimon) + 1;
}
-static ssize_t bonding_store_miimon(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_miimon(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
printk(KERN_ERR DRV_NAME
out:
return ret;
}
-static CLASS_DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon);
+static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, bonding_show_miimon, bonding_store_miimon);
/*
* Show and set the primary slave. The store function is much
* The bond must be a mode that supports a primary for this be
* set.
*/
-static ssize_t bonding_show_primary(struct class_device *cd, char *buf)
+static ssize_t bonding_show_primary(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->primary_slave)
count = sprintf(buf, "%s\n", bond->primary_slave->dev->name) + 1;
return count;
}
-static ssize_t bonding_store_primary(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_primary(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int i;
struct slave *slave;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
write_lock_bh(&bond->lock);
if (!USES_PRIMARY(bond->params.mode)) {
write_unlock_bh(&bond->lock);
return count;
}
-static CLASS_DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary);
+static DEVICE_ATTR(primary, S_IRUGO | S_IWUSR, bonding_show_primary, bonding_store_primary);
/*
* Show and set the use_carrier flag.
*/
-static ssize_t bonding_show_carrier(struct class_device *cd, char *buf)
+static ssize_t bonding_show_carrier(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
return sprintf(buf, "%d\n", bond->params.use_carrier) + 1;
}
-static ssize_t bonding_store_carrier(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_carrier(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int new_value, ret = count;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (sscanf(buf, "%d", &new_value) != 1) {
out:
return count;
}
-static CLASS_DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier);
+static DEVICE_ATTR(use_carrier, S_IRUGO | S_IWUSR, bonding_show_carrier, bonding_store_carrier);
/*
* Show and set currently active_slave.
*/
-static ssize_t bonding_show_active_slave(struct class_device *cd, char *buf)
+static ssize_t bonding_show_active_slave(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct slave *curr;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
int count;
return count;
}
-static ssize_t bonding_store_active_slave(struct class_device *cd, const char *buf, size_t count)
+static ssize_t bonding_store_active_slave(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
int i;
struct slave *slave;
struct slave *old_active = NULL;
struct slave *new_active = NULL;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
write_lock_bh(&bond->lock);
if (!USES_PRIMARY(bond->params.mode)) {
return count;
}
-static CLASS_DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave);
+static DEVICE_ATTR(active_slave, S_IRUGO | S_IWUSR, bonding_show_active_slave, bonding_store_active_slave);
/*
* Show link status of the bond interface.
*/
-static ssize_t bonding_show_mii_status(struct class_device *cd, char *buf)
+static ssize_t bonding_show_mii_status(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
struct slave *curr;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
read_lock(&bond->curr_slave_lock);
curr = bond->curr_active_slave;
return sprintf(buf, "%s\n", (curr) ? "up" : "down") + 1;
}
-static CLASS_DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
+static DEVICE_ATTR(mii_status, S_IRUGO, bonding_show_mii_status, NULL);
/*
* Show current 802.3ad aggregator ID.
*/
-static ssize_t bonding_show_ad_aggregator(struct class_device *cd, char *buf)
+static ssize_t bonding_show_ad_aggregator(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
return count;
}
-static CLASS_DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL);
+static DEVICE_ATTR(ad_aggregator, S_IRUGO, bonding_show_ad_aggregator, NULL);
/*
* Show number of active 802.3ad ports.
*/
-static ssize_t bonding_show_ad_num_ports(struct class_device *cd, char *buf)
+static ssize_t bonding_show_ad_num_ports(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
return count;
}
-static CLASS_DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL);
+static DEVICE_ATTR(ad_num_ports, S_IRUGO, bonding_show_ad_num_ports, NULL);
/*
* Show current 802.3ad actor key.
*/
-static ssize_t bonding_show_ad_actor_key(struct class_device *cd, char *buf)
+static ssize_t bonding_show_ad_actor_key(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
return count;
}
-static CLASS_DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL);
+static DEVICE_ATTR(ad_actor_key, S_IRUGO, bonding_show_ad_actor_key, NULL);
/*
* Show current 802.3ad partner key.
*/
-static ssize_t bonding_show_ad_partner_key(struct class_device *cd, char *buf)
+static ssize_t bonding_show_ad_partner_key(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
return count;
}
-static CLASS_DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL);
+static DEVICE_ATTR(ad_partner_key, S_IRUGO, bonding_show_ad_partner_key, NULL);
/*
* Show current 802.3ad partner mac.
*/
-static ssize_t bonding_show_ad_partner_mac(struct class_device *cd, char *buf)
+static ssize_t bonding_show_ad_partner_mac(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
int count = 0;
- struct bonding *bond = to_bond(cd);
+ struct bonding *bond = to_bond(d);
if (bond->params.mode == BOND_MODE_8023AD) {
struct ad_info ad_info;
return count;
}
-static CLASS_DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL);
+static DEVICE_ATTR(ad_partner_mac, S_IRUGO, bonding_show_ad_partner_mac, NULL);
static struct attribute *per_bond_attrs[] = {
- &class_device_attr_slaves.attr,
- &class_device_attr_mode.attr,
- &class_device_attr_arp_validate.attr,
- &class_device_attr_arp_interval.attr,
- &class_device_attr_arp_ip_target.attr,
- &class_device_attr_downdelay.attr,
- &class_device_attr_updelay.attr,
- &class_device_attr_lacp_rate.attr,
- &class_device_attr_xmit_hash_policy.attr,
- &class_device_attr_miimon.attr,
- &class_device_attr_primary.attr,
- &class_device_attr_use_carrier.attr,
- &class_device_attr_active_slave.attr,
- &class_device_attr_mii_status.attr,
- &class_device_attr_ad_aggregator.attr,
- &class_device_attr_ad_num_ports.attr,
- &class_device_attr_ad_actor_key.attr,
- &class_device_attr_ad_partner_key.attr,
- &class_device_attr_ad_partner_mac.attr,
+ &dev_attr_slaves.attr,
+ &dev_attr_mode.attr,
+ &dev_attr_arp_validate.attr,
+ &dev_attr_arp_interval.attr,
+ &dev_attr_arp_ip_target.attr,
+ &dev_attr_downdelay.attr,
+ &dev_attr_updelay.attr,
+ &dev_attr_lacp_rate.attr,
+ &dev_attr_xmit_hash_policy.attr,
+ &dev_attr_miimon.attr,
+ &dev_attr_primary.attr,
+ &dev_attr_use_carrier.attr,
+ &dev_attr_active_slave.attr,
+ &dev_attr_mii_status.attr,
+ &dev_attr_ad_aggregator.attr,
+ &dev_attr_ad_num_ports.attr,
+ &dev_attr_ad_actor_key.attr,
+ &dev_attr_ad_partner_key.attr,
+ &dev_attr_ad_partner_mac.attr,
NULL,
};
if (!firstbond)
return -ENODEV;
- netdev_class = firstbond->dev->class_dev.class;
+ netdev_class = firstbond->dev->dev.class;
if (!netdev_class)
return -ENODEV;
ret = class_create_file(netdev_class, &class_attr_bonding_masters);
+ /*
+ * Permit multiple loads of the module by ignoring failures to
+ * create the bonding_masters sysfs file. Bonding devices
+ * created by second or subsequent loads of the module will
+ * not be listed in, or controllable by, bonding_masters, but
+ * will have the usual "bonding" sysfs directory.
+ *
+ * This is done to preserve backwards compatibility for
+ * initscripts/sysconfig, which load bonding multiple times to
+ * configure multiple bonding devices.
+ */
+ if (ret == -EEXIST) {
+ netdev_class = NULL;
+ return 0;
+ }
return ret;
struct net_device *dev = bond->dev;
int err;
- err = sysfs_create_group(&(dev->class_dev.kobj), &bonding_group);
+ err = sysfs_create_group(&(dev->dev.kobj), &bonding_group);
if (err) {
printk(KERN_EMERG "eek! didn't create group!\n");
}
if (expected_refcount < 1)
- expected_refcount = atomic_read(&bond->dev->class_dev.kobj.kref.refcount);
+ expected_refcount = atomic_read(&bond->dev->dev.kobj.kref.refcount);
return err;
}
{
struct net_device *dev = bond->dev;
- sysfs_remove_group(&(dev->class_dev.kobj), &bonding_group);
+ sysfs_remove_group(&(dev->dev.kobj), &bonding_group);
}
#include "bond_3ad.h"
#include "bond_alb.h"
-#define DRV_VERSION "3.1.1"
-#define DRV_RELDATE "September 26, 2006"
+#define DRV_VERSION "3.1.2"
+#define DRV_RELDATE "January 20, 2007"
#define DRV_NAME "bonding"
#define DRV_DESCRIPTION "Ethernet Channel Bonding Driver"
#define BOND_ARP_VALIDATE_ALL (BOND_ARP_VALIDATE_ACTIVE | \
BOND_ARP_VALIDATE_BACKUP)
-extern inline int slave_do_arp_validate(struct bonding *bond, struct slave *slave)
+static inline int slave_do_arp_validate(struct bonding *bond,
+ struct slave *slave)
{
return bond->params.arp_validate & (1 << slave->state);
}
-extern inline unsigned long slave_last_rx(struct bonding *bond,
+static inline unsigned long slave_last_rx(struct bonding *bond,
struct slave *slave)
{
if (slave_do_arp_validate(bond, slave))
unsigned char mdio_phybaseaddr;
struct gmac *gmac;
struct gphy *gphy;
- struct mdio_ops *mdio_ops;
+ struct mdio_ops *mdio_ops;
const char *desc;
};
CPL_MIGRATE_C2T_RPL = 0xDD,
CPL_ERROR = 0xD7,
- /* internal: driver -> TOM */
+ /* internal: driver -> TOM */
CPL_MSS_CHANGE = 0xE1
};
};
union opcode_tid {
- u32 opcode_tid;
- u8 opcode;
+ u32 opcode_tid;
+ u8 opcode;
};
#define S_OPCODE 24
u32 local_ip;
u32 peer_ip;
u32 tos_tid;
- struct tcp_options tcp_options;
+ struct tcp_options tcp_options;
u8 dst_mac[6];
u16 vlan_tag;
u8 src_mac[6];
u32 peer_ip;
u32 opt0h;
union {
- u32 opt0l;
- struct {
- u8 rsvd[3];
- u8 status;
+ u32 opt0l;
+ struct {
+ u8 rsvd[3];
+ u8 status;
+ };
};
- };
};
struct cpl_act_open_req {
cancel_delayed_work(&ap->stats_update_task);
}
-#define MAX_CMDQ_ENTRIES 16384
-#define MAX_CMDQ1_ENTRIES 1024
-#define MAX_RX_BUFFERS 16384
-#define MAX_RX_JUMBO_BUFFERS 16384
+#define MAX_CMDQ_ENTRIES 16384
+#define MAX_CMDQ1_ENTRIES 1024
+#define MAX_RX_BUFFERS 16384
+#define MAX_RX_JUMBO_BUFFERS 16384
#define MAX_TX_BUFFERS_HIGH 16384U
#define MAX_TX_BUFFERS_LOW 1536U
#define MAX_TX_BUFFERS 1460U
-#define MIN_FL_ENTRIES 32
+#define MIN_FL_ENTRIES 32
#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
case SPEED_100: s = "100Mbps"; break;
}
- printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
+ printk(KERN_INFO "%s: link up, %s, %s-duplex\n",
p->dev->name, s,
p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
}
t1_sge_start(adapter->sge);
t1_interrupts_enable(adapter);
- out_err:
+out_err:
return err;
}
const struct cmac_statistics *s;
const struct sge_intr_counts *t;
struct sge_port_stats ss;
+ unsigned int len;
s = mac->ops->statistics_update(mac, MAC_STATS_UPDATE_FULL);
- *data++ = s->TxOctetsOK;
- *data++ = s->TxOctetsBad;
- *data++ = s->TxUnicastFramesOK;
- *data++ = s->TxMulticastFramesOK;
- *data++ = s->TxBroadcastFramesOK;
- *data++ = s->TxPauseFrames;
- *data++ = s->TxFramesWithDeferredXmissions;
- *data++ = s->TxLateCollisions;
- *data++ = s->TxTotalCollisions;
- *data++ = s->TxFramesAbortedDueToXSCollisions;
- *data++ = s->TxUnderrun;
- *data++ = s->TxLengthErrors;
- *data++ = s->TxInternalMACXmitError;
- *data++ = s->TxFramesWithExcessiveDeferral;
- *data++ = s->TxFCSErrors;
-
- *data++ = s->RxOctetsOK;
- *data++ = s->RxOctetsBad;
- *data++ = s->RxUnicastFramesOK;
- *data++ = s->RxMulticastFramesOK;
- *data++ = s->RxBroadcastFramesOK;
- *data++ = s->RxPauseFrames;
- *data++ = s->RxFCSErrors;
- *data++ = s->RxAlignErrors;
- *data++ = s->RxSymbolErrors;
- *data++ = s->RxDataErrors;
- *data++ = s->RxSequenceErrors;
- *data++ = s->RxRuntErrors;
- *data++ = s->RxJabberErrors;
- *data++ = s->RxInternalMACRcvError;
- *data++ = s->RxInRangeLengthErrors;
- *data++ = s->RxOutOfRangeLengthField;
- *data++ = s->RxFrameTooLongErrors;
+ len = sizeof(u64)*(&s->TxFCSErrors + 1 - &s->TxOctetsOK);
+ memcpy(data, &s->TxOctetsOK, len);
+ data += len;
+
+ len = sizeof(u64)*(&s->RxFrameTooLongErrors + 1 - &s->RxOctetsOK);
+ memcpy(data, &s->RxOctetsOK, len);
+ data += len;
t1_sge_get_port_stats(adapter->sge, dev->if_port, &ss);
- *data++ = ss.rx_packets;
- *data++ = ss.rx_cso_good;
- *data++ = ss.tx_packets;
- *data++ = ss.tx_cso;
- *data++ = ss.tx_tso;
- *data++ = ss.vlan_xtract;
- *data++ = ss.vlan_insert;
+ memcpy(data, &ss, sizeof(ss));
+ data += sizeof(ss);
t = t1_sge_get_intr_counts(adapter->sge);
*data++ = t->rx_drops;
return -EINVAL;
if (adapter->flags & FULL_INIT_DONE)
- return -EBUSY;
+ return -EBUSY;
adapter->params.sge.freelQ_size[!jumbo_fl] = e->rx_pending;
adapter->params.sge.freelQ_size[jumbo_fl] = e->rx_jumbo_pending;
struct adapter *adapter = dev->priv;
adapter->params.sge.rx_coalesce_usecs = c->rx_coalesce_usecs;
- adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
+ adapter->params.sge.coalesce_enable = c->use_adaptive_rx_coalesce;
adapter->params.sge.sample_interval_usecs = c->rate_sample_interval;
t1_sge_set_coalesce_params(adapter->sge, &adapter->params.sge);
return 0;
static int get_eeprom_len(struct net_device *dev)
{
- struct adapter *adapter = dev->priv;
+ struct adapter *adapter = dev->priv;
- return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
+ return t1_is_asic(adapter) ? EEPROM_SIZE : 0;
}
#define EEPROM_MAGIC(ap) \
u32 val;
if (!phy->mdio_read)
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
phy->mdio_read(adapter, data->phy_id, 0, data->reg_num & 0x1f,
&val);
data->val_out = val;
if (!capable(CAP_NET_ADMIN))
return -EPERM;
if (!phy->mdio_write)
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
phy->mdio_write(adapter, data->phy_id, 0, data->reg_num & 0x1f,
data->val_in);
break;
struct cmac *mac = adapter->port[dev->if_port].mac;
if (!mac->ops->set_mtu)
- return -EOPNOTSUPP;
+ return -EOPNOTSUPP;
if (new_mtu < 68)
- return -EINVAL;
+ return -EINVAL;
if ((ret = mac->ops->set_mtu(mac, new_mtu)))
return ret;
dev->mtu = new_mtu;
return 0;
- out_release_adapter_res:
+out_release_adapter_res:
t1_free_sw_modules(adapter);
- out_free_dev:
+out_free_dev:
if (adapter) {
if (adapter->regs)
iounmap(adapter->regs);
free_netdev(adapter->port[i].dev);
}
pci_release_regions(pdev);
- out_disable_pdev:
+out_disable_pdev:
pci_disable_device(pdev);
pci_set_drvdata(pdev, NULL);
return err;
int M_MEM_VAL;
enum {
- M_CORE_BITS = 9,
- T_CORE_VAL = 0,
- T_CORE_BITS = 2,
- N_CORE_VAL = 0,
- N_CORE_BITS = 2,
- M_MEM_BITS = 9,
- T_MEM_VAL = 0,
- T_MEM_BITS = 2,
- N_MEM_VAL = 0,
- N_MEM_BITS = 2,
- NP_LOAD = 1 << 17,
- S_LOAD_MEM = 1 << 5,
- S_LOAD_CORE = 1 << 6,
- S_CLOCK = 1 << 3
+ M_CORE_BITS = 9,
+ T_CORE_VAL = 0,
+ T_CORE_BITS = 2,
+ N_CORE_VAL = 0,
+ N_CORE_BITS = 2,
+ M_MEM_BITS = 9,
+ T_MEM_VAL = 0,
+ T_MEM_BITS = 2,
+ N_MEM_VAL = 0,
+ N_MEM_BITS = 2,
+ NP_LOAD = 1 << 17,
+ S_LOAD_MEM = 1 << 5,
+ S_LOAD_CORE = 1 << 6,
+ S_CLOCK = 1 << 3
};
if (!t1_is_T1B(adapter))
return -ENODEV; /* Can't re-clock this chip. */
- if (mode & 2) {
+ if (mode & 2)
return 0; /* show current mode. */
- }
if ((adapter->t1powersave & 1) == (mode & 1))
return -EALREADY; /* ASIC already running in mode. */
static void __devexit remove_one(struct pci_dev *pdev)
{
struct net_device *dev = pci_get_drvdata(pdev);
+ struct adapter *adapter = dev->priv;
+ int i;
- if (dev) {
- int i;
- struct adapter *adapter = dev->priv;
-
- for_each_port(adapter, i)
- if (test_bit(i, &adapter->registered_device_map))
- unregister_netdev(adapter->port[i].dev);
+ for_each_port(adapter, i) {
+ if (test_bit(i, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[i].dev);
+ }
- t1_free_sw_modules(adapter);
- iounmap(adapter->regs);
- while (--i >= 0)
- if (adapter->port[i].dev)
- free_netdev(adapter->port[i].dev);
+ t1_free_sw_modules(adapter);
+ iounmap(adapter->regs);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
- t1_sw_reset(pdev);
+ while (--i >= 0) {
+ if (adapter->port[i].dev)
+ free_netdev(adapter->port[i].dev);
}
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ t1_sw_reset(pdev);
}
static struct pci_driver driver = {
};
/* ELMER0 registers */
-#define A_ELMER0_VERSION 0x100000
-#define A_ELMER0_PHY_CFG 0x100004
-#define A_ELMER0_INT_ENABLE 0x100008
-#define A_ELMER0_INT_CAUSE 0x10000c
-#define A_ELMER0_GPI_CFG 0x100010
-#define A_ELMER0_GPI_STAT 0x100014
-#define A_ELMER0_GPO 0x100018
-#define A_ELMER0_PORT0_MI1_CFG 0x400000
+#define A_ELMER0_VERSION 0x100000
+#define A_ELMER0_PHY_CFG 0x100004
+#define A_ELMER0_INT_ENABLE 0x100008
+#define A_ELMER0_INT_CAUSE 0x10000c
+#define A_ELMER0_GPI_CFG 0x100010
+#define A_ELMER0_GPI_STAT 0x100014
+#define A_ELMER0_GPO 0x100018
+#define A_ELMER0_PORT0_MI1_CFG 0x400000
#define S_MI1_MDI_ENABLE 0
#define V_MI1_MDI_ENABLE(x) ((x) << S_MI1_MDI_ENABLE)
#define V_MI1_OP_BUSY(x) ((x) << S_MI1_OP_BUSY)
#define F_MI1_OP_BUSY V_MI1_OP_BUSY(1U)
-#define A_ELMER0_PORT1_MI1_CFG 0x500000
-#define A_ELMER0_PORT1_MI1_ADDR 0x500004
-#define A_ELMER0_PORT1_MI1_DATA 0x500008
-#define A_ELMER0_PORT1_MI1_OP 0x50000c
-#define A_ELMER0_PORT2_MI1_CFG 0x600000
-#define A_ELMER0_PORT2_MI1_ADDR 0x600004
-#define A_ELMER0_PORT2_MI1_DATA 0x600008
-#define A_ELMER0_PORT2_MI1_OP 0x60000c
-#define A_ELMER0_PORT3_MI1_CFG 0x700000
-#define A_ELMER0_PORT3_MI1_ADDR 0x700004
-#define A_ELMER0_PORT3_MI1_DATA 0x700008
-#define A_ELMER0_PORT3_MI1_OP 0x70000c
+#define A_ELMER0_PORT1_MI1_CFG 0x500000
+#define A_ELMER0_PORT1_MI1_ADDR 0x500004
+#define A_ELMER0_PORT1_MI1_DATA 0x500008
+#define A_ELMER0_PORT1_MI1_OP 0x50000c
+#define A_ELMER0_PORT2_MI1_CFG 0x600000
+#define A_ELMER0_PORT2_MI1_ADDR 0x600004
+#define A_ELMER0_PORT2_MI1_DATA 0x600008
+#define A_ELMER0_PORT2_MI1_OP 0x60000c
+#define A_ELMER0_PORT3_MI1_CFG 0x700000
+#define A_ELMER0_PORT3_MI1_ADDR 0x700004
+#define A_ELMER0_PORT3_MI1_DATA 0x700008
+#define A_ELMER0_PORT3_MI1_OP 0x70000c
/* Simple bit definition for GPI and GP0 registers. */
#define ELMER0_GP_BIT0 0x0001
static void espi_setup_for_vsc7321(adapter_t *adapter)
{
- writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
- writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
- writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN0);
+ writel(0x1f401f4, adapter->regs + A_ESPI_SCH_TOKEN1);
+ writel(0x1f4, adapter->regs + A_ESPI_SCH_TOKEN2);
writel(0xa00, adapter->regs + A_ESPI_RX_FIFO_ALMOST_FULL_WATERMARK);
writel(0x1ff, adapter->regs + A_ESPI_RX_FIFO_ALMOST_EMPTY_WATERMARK);
writel(1, adapter->regs + A_ESPI_CALENDAR_LENGTH);
writel(V_OUT_OF_SYNC_COUNT(4) |
V_DIP2_PARITY_ERR_THRES(3) |
V_DIP4_THRES(1), adapter->regs + A_ESPI_MISC_CONTROL);
- writel(nports == 4 ? 0x200040 : 0x1000080,
+ writel(nports == 4 ? 0x200040 : 0x1000080,
adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
} else
- writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
+ writel(0x800100, adapter->regs + A_ESPI_MAXBURST1_MAXBURST2);
if (mac_type == CHBT_MAC_PM3393)
espi_setup_for_pm3393(adapter);
{
struct peespi *espi = adapter->espi;
- if (!is_T2(adapter)) return;
+ if (!is_T2(adapter))
+ return;
spin_lock(&espi->lock);
espi->misc_ctrl = (val & ~MON_MASK) |
(espi->misc_ctrl & MON_MASK);
* compare with t1_espi_get_mon(), it reads espiInTxSop[0 ~ 3] in
* one shot, since there is no per port counter on the out side.
*/
-int
-t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
+int t1_espi_get_mon_t204(adapter_t *adapter, u32 *valp, u8 wait)
{
- struct peespi *espi = adapter->espi;
+ struct peespi *espi = adapter->espi;
u8 i, nport = (u8)adapter->params.nports;
- if (!wait) {
- if (!spin_trylock(&espi->lock))
- return -1;
- } else
- spin_lock(&espi->lock);
+ if (!wait) {
+ if (!spin_trylock(&espi->lock))
+ return -1;
+ } else
+ spin_lock(&espi->lock);
- if ( (espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION ) {
+ if ((espi->misc_ctrl & MON_MASK) != F_MONITORED_DIRECTION) {
espi->misc_ctrl = (espi->misc_ctrl & ~MON_MASK) |
F_MONITORED_DIRECTION;
- writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
- }
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ }
for (i = 0 ; i < nport; i++, valp++) {
if (i) {
writel(espi->misc_ctrl | V_MONITORED_PORT_NUM(i),
adapter->regs + A_ESPI_MISC_CONTROL);
}
- *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
- }
+ *valp = readl(adapter->regs + A_ESPI_SCH_TOKEN3);
+ }
- writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
- spin_unlock(&espi->lock);
- return 0;
+ writel(espi->misc_ctrl, adapter->regs + A_ESPI_MISC_CONTROL);
+ spin_unlock(&espi->lock);
+ return 0;
}
#define A_MI0_DATA_INT 0xb10
/* GMAC registers */
-#define A_GMAC_MACID_LO 0x28
-#define A_GMAC_MACID_HI 0x2c
-#define A_GMAC_CSR 0x30
+#define A_GMAC_MACID_LO 0x28
+#define A_GMAC_MACID_HI 0x2c
+#define A_GMAC_CSR 0x30
#define S_INTERFACE 0
#define M_INTERFACE 0x3
#include "common.h"
-enum { MAC_STATS_UPDATE_FAST, MAC_STATS_UPDATE_FULL };
-enum { MAC_DIRECTION_RX = 1, MAC_DIRECTION_TX = 2 };
+enum {
+ MAC_STATS_UPDATE_FAST,
+ MAC_STATS_UPDATE_FULL
+};
+
+enum {
+ MAC_DIRECTION_RX = 1,
+ MAC_DIRECTION_TX = 2
+};
struct cmac_statistics {
/* Transmit */
t1_tpi_write(mac->adapter, REG_PORT_ENABLE, val);
}
-#define RMON_UPDATE(mac, name, stat_name) \
- t1_tpi_read((mac)->adapter, MACREG(mac, REG_##name), &val); \
- (mac)->stats.stat_name += val;
-
/*
* Read the current values of the RMON counters and add them to the cumulative
* port statistics. The HW RMON counters are cleared by this operation.
*/
static void port_stats_update(struct cmac *mac)
{
- u32 val;
+ static struct {
+ unsigned int reg;
+ unsigned int offset;
+ } hw_stats[] = {
+
+#define HW_STAT(name, stat_name) \
+ { REG_##name, \
+ (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }
+
+ /* Rx stats */
+ HW_STAT(RxOctetsTotalOK, RxOctetsOK),
+ HW_STAT(RxOctetsBad, RxOctetsBad),
+ HW_STAT(RxUCPkts, RxUnicastFramesOK),
+ HW_STAT(RxMCPkts, RxMulticastFramesOK),
+ HW_STAT(RxBCPkts, RxBroadcastFramesOK),
+ HW_STAT(RxJumboPkts, RxJumboFramesOK),
+ HW_STAT(RxFCSErrors, RxFCSErrors),
+ HW_STAT(RxAlignErrors, RxAlignErrors),
+ HW_STAT(RxLongErrors, RxFrameTooLongErrors),
+ HW_STAT(RxVeryLongErrors, RxFrameTooLongErrors),
+ HW_STAT(RxPauseMacControlCounter, RxPauseFrames),
+ HW_STAT(RxDataErrors, RxDataErrors),
+ HW_STAT(RxJabberErrors, RxJabberErrors),
+ HW_STAT(RxRuntErrors, RxRuntErrors),
+ HW_STAT(RxShortErrors, RxRuntErrors),
+ HW_STAT(RxSequenceErrors, RxSequenceErrors),
+ HW_STAT(RxSymbolErrors, RxSymbolErrors),
+
+ /* Tx stats (skip collision stats as we are full-duplex only) */
+ HW_STAT(TxOctetsTotalOK, TxOctetsOK),
+ HW_STAT(TxOctetsBad, TxOctetsBad),
+ HW_STAT(TxUCPkts, TxUnicastFramesOK),
+ HW_STAT(TxMCPkts, TxMulticastFramesOK),
+ HW_STAT(TxBCPkts, TxBroadcastFramesOK),
+ HW_STAT(TxJumboPkts, TxJumboFramesOK),
+ HW_STAT(TxPauseFrames, TxPauseFrames),
+ HW_STAT(TxExcessiveLengthDrop, TxLengthErrors),
+ HW_STAT(TxUnderrun, TxUnderrun),
+ HW_STAT(TxCRCErrors, TxFCSErrors)
+ }, *p = hw_stats;
+ u64 *stats = (u64 *) &mac->stats;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hw_stats); i++) {
+ u32 val;
- /* Rx stats */
- RMON_UPDATE(mac, RxOctetsTotalOK, RxOctetsOK);
- RMON_UPDATE(mac, RxOctetsBad, RxOctetsBad);
- RMON_UPDATE(mac, RxUCPkts, RxUnicastFramesOK);
- RMON_UPDATE(mac, RxMCPkts, RxMulticastFramesOK);
- RMON_UPDATE(mac, RxBCPkts, RxBroadcastFramesOK);
- RMON_UPDATE(mac, RxJumboPkts, RxJumboFramesOK);
- RMON_UPDATE(mac, RxFCSErrors, RxFCSErrors);
- RMON_UPDATE(mac, RxAlignErrors, RxAlignErrors);
- RMON_UPDATE(mac, RxLongErrors, RxFrameTooLongErrors);
- RMON_UPDATE(mac, RxVeryLongErrors, RxFrameTooLongErrors);
- RMON_UPDATE(mac, RxPauseMacControlCounter, RxPauseFrames);
- RMON_UPDATE(mac, RxDataErrors, RxDataErrors);
- RMON_UPDATE(mac, RxJabberErrors, RxJabberErrors);
- RMON_UPDATE(mac, RxRuntErrors, RxRuntErrors);
- RMON_UPDATE(mac, RxShortErrors, RxRuntErrors);
- RMON_UPDATE(mac, RxSequenceErrors, RxSequenceErrors);
- RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors);
-
- /* Tx stats (skip collision stats as we are full-duplex only) */
- RMON_UPDATE(mac, TxOctetsTotalOK, TxOctetsOK);
- RMON_UPDATE(mac, TxOctetsBad, TxOctetsBad);
- RMON_UPDATE(mac, TxUCPkts, TxUnicastFramesOK);
- RMON_UPDATE(mac, TxMCPkts, TxMulticastFramesOK);
- RMON_UPDATE(mac, TxBCPkts, TxBroadcastFramesOK);
- RMON_UPDATE(mac, TxJumboPkts, TxJumboFramesOK);
- RMON_UPDATE(mac, TxPauseFrames, TxPauseFrames);
- RMON_UPDATE(mac, TxExcessiveLengthDrop, TxLengthErrors);
- RMON_UPDATE(mac, TxUnderrun, TxUnderrun);
- RMON_UPDATE(mac, TxCRCErrors, TxFCSErrors);
+ t1_tpi_read(mac->adapter, MACREG(mac, p->reg), &val);
+ stats[p->offset] += val;
+ }
}
/* No-op interrupt operation as this MAC does not support interrupts */
static int mac_set_mtu(struct cmac *mac, int mtu)
{
/* MAX_FRAME_SIZE inludes header + FCS, mtu doesn't */
- if (mtu > (MAX_FRAME_SIZE - 14 - 4)) return -EINVAL;
+ if (mtu > (MAX_FRAME_SIZE - 14 - 4))
+ return -EINVAL;
t1_tpi_write(mac->adapter, MACREG(mac, REG_MAX_FRAME_SIZE),
mtu + 14 + 4);
return 0;
val |= (1 << index);
t1_tpi_write(adapter, REG_PORT_ENABLE, val);
- index <<= 2;
- if (is_T2(adapter)) {
+ index <<= 2;
+ if (is_T2(adapter)) {
/* T204: set the Fifo water level & threshold */
t1_tpi_write(adapter, RX_FIFO_HIGH_WATERMARK_BASE + index, 0x740);
t1_tpi_write(adapter, RX_FIFO_LOW_WATERMARK_BASE + index, 0x730);
return 0;
}
+#define RMON_UPDATE(mac, name, stat_name) \
+ t1_tpi_read((mac)->adapter, MACREG(mac, REG_##name), &val); \
+ (mac)->stats.stat_name += val;
+
/*
* This function is called periodically to accumulate the current values of the
* RMON counters into the port statistics. Since the counters are only 32 bits
struct cmac *mac;
u32 val;
- if (index > 9) return NULL;
+ if (index > 9)
+ return NULL;
mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL);
- if (!mac) return NULL;
+ if (!mac)
+ return NULL;
mac->ops = &ixf1010_ops;
mac->instance = (cmac_instance *)(mac + 1);
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
- elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
- }
+ if (is_T2(cphy->adapter))
+ elmer |= ELMER0_GP_BIT2 | ELMER0_GP_BIT3 | ELMER0_GP_BIT4;
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
+ if (is_T2(cphy->adapter))
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
- }
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
return 0;
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
+ if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
- }
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
return 0;
/*
* Loop until cause reads zero. Need to handle bouncing interrupts.
- */
+ */
while (1) {
u32 cause;
MV88E1XXX_INTERRUPT_STATUS_REGISTER,
&cause);
cause &= INTR_ENABLE_MASK;
- if (!cause) break;
+ if (!cause)
+ break;
if (cause & MV88E1XXX_INTR_LINK_CHNG) {
(void) simple_mdio_read(cphy,
MV88E1XXX_SPECIFIC_STATUS_REGISTER, &status);
- if (status & MV88E1XXX_INTR_LINK_CHNG) {
+ if (status & MV88E1XXX_INTR_LINK_CHNG)
cphy->state |= PHY_LINK_UP;
- } else {
+ else {
cphy->state &= ~PHY_LINK_UP;
if (cphy->state & PHY_AUTONEG_EN)
cphy->state &= ~PHY_AUTONEG_RDY;
{
struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
- if (!cphy) return NULL;
+ if (!cphy)
+ return NULL;
cphy_init(cphy, adapter, phy_addr, &mv88e1xxx_ops, mdio_ops);
}
(void) mv88e1xxx_downshift_set(cphy, 1); /* Enable downshift */
- /* LED */
+ /* LED */
if (is_T2(adapter)) {
(void) simple_mdio_write(cphy,
MV88E1XXX_LED_CONTROL_REGISTER, 0x1);
- }
+ }
return cphy;
}
* This can be done through registers. It is not required since
* a full chip reset is used.
*/
- return (0);
+ return 0;
}
static int my3126_interrupt_enable(struct cphy *cphy)
{
schedule_delayed_work(&cphy->phy_update, HZ/30);
t1_tpi_read(cphy->adapter, A_ELMER0_GPO, &cphy->elmer_gpo);
- return (0);
+ return 0;
}
static int my3126_interrupt_disable(struct cphy *cphy)
{
cancel_rearming_delayed_work(&cphy->phy_update);
- return (0);
+ return 0;
}
static int my3126_interrupt_clear(struct cphy *cphy)
{
- return (0);
+ return 0;
}
#define OFFSET(REG_ADDR) (REG_ADDR << 2)
static int my3126_set_loopback(struct cphy *cphy, int on)
{
- return (0);
+ return 0;
}
/* To check the activity LED */
if (fc)
*fc = PAUSE_RX | PAUSE_TX;
- return (0);
+ return 0;
}
static void my3126_destroy(struct cphy *cphy)
INIT_DELAYED_WORK(&cphy->phy_update, my3216_poll);
cphy->bmsr = 0;
- return (cphy);
+ return cphy;
}
/* Chip Reset */
val |= 0x8000;
t1_tpi_write(adapter, A_ELMER0_GPO, val);
udelay(100);
- return (0);
+ return 0;
}
struct gphy t1_my3126_ops = {
*val += 1ull << 40;
}
-#define RMON_UPDATE(mac, name, stat_name) \
- pm3393_rmon_update((mac)->adapter, OFFSET(name), \
- &(mac)->stats.stat_name, \
- (ro &((name - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW) >> 2)))
-
-
static const struct cmac_statistics *pm3393_update_statistics(struct cmac *mac,
int flag)
{
- u64 ro;
- u32 val0, val1, val2, val3;
+ static struct {
+ unsigned int reg;
+ unsigned int offset;
+ } hw_stats [] = {
+
+#define HW_STAT(name, stat_name) \
+ { name, (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }
+
+ /* Rx stats */
+ HW_STAT(RxOctetsReceivedOK, RxOctetsOK),
+ HW_STAT(RxUnicastFramesReceivedOK, RxUnicastFramesOK),
+ HW_STAT(RxMulticastFramesReceivedOK, RxMulticastFramesOK),
+ HW_STAT(RxBroadcastFramesReceivedOK, RxBroadcastFramesOK),
+ HW_STAT(RxPAUSEMACCtrlFramesReceived, RxPauseFrames),
+ HW_STAT(RxFrameCheckSequenceErrors, RxFCSErrors),
+ HW_STAT(RxFramesLostDueToInternalMACErrors,
+ RxInternalMACRcvError),
+ HW_STAT(RxSymbolErrors, RxSymbolErrors),
+ HW_STAT(RxInRangeLengthErrors, RxInRangeLengthErrors),
+ HW_STAT(RxFramesTooLongErrors , RxFrameTooLongErrors),
+ HW_STAT(RxJabbers, RxJabberErrors),
+ HW_STAT(RxFragments, RxRuntErrors),
+ HW_STAT(RxUndersizedFrames, RxRuntErrors),
+ HW_STAT(RxJumboFramesReceivedOK, RxJumboFramesOK),
+ HW_STAT(RxJumboOctetsReceivedOK, RxJumboOctetsOK),
+
+ /* Tx stats */
+ HW_STAT(TxOctetsTransmittedOK, TxOctetsOK),
+ HW_STAT(TxFramesLostDueToInternalMACTransmissionError,
+ TxInternalMACXmitError),
+ HW_STAT(TxTransmitSystemError, TxFCSErrors),
+ HW_STAT(TxUnicastFramesTransmittedOK, TxUnicastFramesOK),
+ HW_STAT(TxMulticastFramesTransmittedOK, TxMulticastFramesOK),
+ HW_STAT(TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK),
+ HW_STAT(TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames),
+ HW_STAT(TxJumboFramesReceivedOK, TxJumboFramesOK),
+ HW_STAT(TxJumboOctetsReceivedOK, TxJumboOctetsOK)
+ }, *p = hw_stats;
+ u64 ro;
+ u32 val0, val1, val2, val3;
+ u64 *stats = (u64 *) &mac->stats;
+ unsigned int i;
/* Snap the counters */
pmwrite(mac, SUNI1x10GEXP_REG_MSTAT_CONTROL,
ro = ((u64)val0 & 0xffff) | (((u64)val1 & 0xffff) << 16) |
(((u64)val2 & 0xffff) << 32) | (((u64)val3 & 0xffff) << 48);
- /* Rx stats */
- RMON_UPDATE(mac, RxOctetsReceivedOK, RxOctetsOK);
- RMON_UPDATE(mac, RxUnicastFramesReceivedOK, RxUnicastFramesOK);
- RMON_UPDATE(mac, RxMulticastFramesReceivedOK, RxMulticastFramesOK);
- RMON_UPDATE(mac, RxBroadcastFramesReceivedOK, RxBroadcastFramesOK);
- RMON_UPDATE(mac, RxPAUSEMACCtrlFramesReceived, RxPauseFrames);
- RMON_UPDATE(mac, RxFrameCheckSequenceErrors, RxFCSErrors);
- RMON_UPDATE(mac, RxFramesLostDueToInternalMACErrors,
- RxInternalMACRcvError);
- RMON_UPDATE(mac, RxSymbolErrors, RxSymbolErrors);
- RMON_UPDATE(mac, RxInRangeLengthErrors, RxInRangeLengthErrors);
- RMON_UPDATE(mac, RxFramesTooLongErrors , RxFrameTooLongErrors);
- RMON_UPDATE(mac, RxJabbers, RxJabberErrors);
- RMON_UPDATE(mac, RxFragments, RxRuntErrors);
- RMON_UPDATE(mac, RxUndersizedFrames, RxRuntErrors);
- RMON_UPDATE(mac, RxJumboFramesReceivedOK, RxJumboFramesOK);
- RMON_UPDATE(mac, RxJumboOctetsReceivedOK, RxJumboOctetsOK);
-
- /* Tx stats */
- RMON_UPDATE(mac, TxOctetsTransmittedOK, TxOctetsOK);
- RMON_UPDATE(mac, TxFramesLostDueToInternalMACTransmissionError,
- TxInternalMACXmitError);
- RMON_UPDATE(mac, TxTransmitSystemError, TxFCSErrors);
- RMON_UPDATE(mac, TxUnicastFramesTransmittedOK, TxUnicastFramesOK);
- RMON_UPDATE(mac, TxMulticastFramesTransmittedOK, TxMulticastFramesOK);
- RMON_UPDATE(mac, TxBroadcastFramesTransmittedOK, TxBroadcastFramesOK);
- RMON_UPDATE(mac, TxPAUSEMACCtrlFramesTransmitted, TxPauseFrames);
- RMON_UPDATE(mac, TxJumboFramesReceivedOK, TxJumboFramesOK);
- RMON_UPDATE(mac, TxJumboOctetsReceivedOK, TxJumboOctetsOK);
+ for (i = 0; i < ARRAY_SIZE(hw_stats); i++) {
+ unsigned reg = p->reg - SUNI1x10GEXP_REG_MSTAT_COUNTER_0_LOW;
+
+ pm3393_rmon_update((mac)->adapter, OFFSET(p->reg),
+ stats + p->offset, ro & (reg >> 2));
+ }
+
+
return &mac->stats;
}
/* Store local copy */
memcpy(cmac->instance->mac_addr, ma, 6);
- lo = ((u32) ma[1] << 8) | (u32) ma[0];
+ lo = ((u32) ma[1] << 8) | (u32) ma[0];
mid = ((u32) ma[3] << 8) | (u32) ma[2];
- hi = ((u32) ma[5] << 8) | (u32) ma[4];
+ hi = ((u32) ma[5] << 8) | (u32) ma[4];
/* Disable Rx/Tx MAC before configuring it. */
if (enabled)
#define SGE_FREEL_REFILL_THRESH 16
#define SGE_RESPQ_E_N 1024
#define SGE_INTRTIMER_NRES 1000
-#define SGE_RX_COPY_THRES 256
#define SGE_RX_SM_BUF_SIZE 1536
#define SGE_TX_DESC_MAX_PLEN 16384
-# define SGE_RX_DROP_THRES 2
-
#define SGE_RESPQ_REPLENISH_THRES (SGE_RESPQ_E_N / 4)
/*
*/
#define TX_RECLAIM_PERIOD (HZ / 4)
-#ifndef NET_IP_ALIGN
-# define NET_IP_ALIGN 2
-#endif
-
#define M_CMD_LEN 0x7fffffff
#define V_CMD_LEN(v) (v)
#define G_CMD_LEN(v) ((v) & M_CMD_LEN)
struct cmdQ_e *entries; /* HW command descriptor Q */
struct cmdQ_ce *centries; /* SW command context descriptor Q */
dma_addr_t dma_addr; /* DMA addr HW command descriptor Q */
- spinlock_t lock; /* Lock to protect cmdQ enqueuing */
+ spinlock_t lock; /* Lock to protect cmdQ enqueuing */
};
struct freelQ {
/* Per T204 device */
struct sched {
ktime_t last_updated; /* last time quotas were computed */
- unsigned int max_avail; /* max bits to be sent to any port */
- unsigned int port; /* port index (round robin ports) */
- unsigned int num; /* num skbs in per port queues */
+ unsigned int max_avail; /* max bits to be sent to any port */
+ unsigned int port; /* port index (round robin ports) */
+ unsigned int num; /* num skbs in per port queues */
struct sched_port p[MAX_NPORTS];
struct tasklet_struct sched_tsk;/* tasklet used to run scheduler */
};
* contention.
*/
struct sge {
- struct adapter *adapter; /* adapter backpointer */
+ struct adapter *adapter; /* adapter backpointer */
struct net_device *netdev; /* netdevice backpointer */
- struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */
- struct respQ respQ; /* response Q */
+ struct freelQ freelQ[SGE_FREELQ_N]; /* buffer free lists */
+ struct respQ respQ; /* response Q */
unsigned long stopped_tx_queues; /* bitmap of suspended Tx queues */
unsigned int rx_pkt_pad; /* RX padding for L2 packets */
unsigned int jumbo_fl; /* jumbo freelist Q index */
if (credits < MAX_SKB_FRAGS + 1)
goto out;
- again:
+again:
for (i = 0; i < MAX_NPORTS; i++) {
s->port = ++s->port & (MAX_NPORTS - 1);
skbq = &s->p[s->port].skbq;
if (update-- && sched_update_avail(sge))
goto again;
- out:
- /* If there are more pending skbs, we use the hardware to schedule us
+out:
+ /* If there are more pending skbs, we use the hardware to schedule us
* again.
*/
if (s->num && !skb) {
q->size = p->freelQ_size[i];
q->dma_offset = sge->rx_pkt_pad ? 0 : NET_IP_ALIGN;
size = sizeof(struct freelQ_e) * q->size;
- q->entries = (struct freelQ_e *)
- pci_alloc_consistent(pdev, size, &q->dma_addr);
+ q->entries = pci_alloc_consistent(pdev, size, &q->dma_addr);
if (!q->entries)
goto err_no_mem;
- memset(q->entries, 0, size);
+
size = sizeof(struct freelQ_ce) * q->size;
q->centries = kzalloc(size, GFP_KERNEL);
if (!q->centries)
sge->respQ.size = SGE_RESPQ_E_N;
sge->respQ.credits = 0;
size = sizeof(struct respQ_e) * sge->respQ.size;
- sge->respQ.entries = (struct respQ_e *)
+ sge->respQ.entries =
pci_alloc_consistent(pdev, size, &sge->respQ.dma_addr);
if (!sge->respQ.entries)
goto err_no_mem;
- memset(sge->respQ.entries, 0, size);
return 0;
err_no_mem:
q->in_use -= n;
ce = &q->centries[cidx];
while (n--) {
- if (q->sop) {
- if (likely(pci_unmap_len(ce, dma_len))) {
- pci_unmap_single(pdev,
- pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_TODEVICE);
+ if (likely(pci_unmap_len(ce, dma_len))) {
+ pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_TODEVICE);
+ if (q->sop)
q->sop = 0;
- }
- } else {
- if (likely(pci_unmap_len(ce, dma_len))) {
- pci_unmap_page(pdev, pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_TODEVICE);
- }
}
if (ce->skb) {
dev_kfree_skb_any(ce->skb);
q->stop_thres = 0;
spin_lock_init(&q->lock);
size = sizeof(struct cmdQ_e) * q->size;
- q->entries = (struct cmdQ_e *)
- pci_alloc_consistent(pdev, size, &q->dma_addr);
+ q->entries = pci_alloc_consistent(pdev, size, &q->dma_addr);
if (!q->entries)
goto err_no_mem;
- memset(q->entries, 0, size);
+
size = sizeof(struct cmdQ_ce) * q->size;
q->centries = kzalloc(size, GFP_KERNEL);
if (!q->centries)
static void configure_sge(struct sge *sge, struct sge_params *p)
{
struct adapter *ap = sge->adapter;
-
+
writel(0, ap->regs + A_SG_CONTROL);
setup_ring_params(ap, sge->cmdQ[0].dma_addr, sge->cmdQ[0].size,
A_SG_CMD0BASELWR, A_SG_CMD0BASEUPR, A_SG_CMD0SIZE);
struct freelQ_e *e = &q->entries[q->pidx];
unsigned int dma_len = q->rx_buffer_size - q->dma_offset;
-
while (q->credits < q->size) {
struct sk_buff *skb;
dma_addr_t mapping;
skb_reserve(skb, q->dma_offset);
mapping = pci_map_single(pdev, skb->data, dma_len,
PCI_DMA_FROMDEVICE);
+ skb_reserve(skb, sge->rx_pkt_pad);
+
ce->skb = skb;
pci_unmap_addr_set(ce, dma_addr, mapping);
pci_unmap_len_set(ce, dma_len, dma_len);
}
q->credits++;
}
-
}
/*
}
}
+static int copybreak __read_mostly = 256;
+module_param(copybreak, int, 0);
+MODULE_PARM_DESC(copybreak, "Receive copy threshold");
+
/**
* get_packet - return the next ingress packet buffer
* @pdev: the PCI device that received the packet
* be copied but there is no memory for the copy.
*/
static inline struct sk_buff *get_packet(struct pci_dev *pdev,
- struct freelQ *fl, unsigned int len,
- int dma_pad, int skb_pad,
- unsigned int copy_thres,
- unsigned int drop_thres)
+ struct freelQ *fl, unsigned int len)
{
struct sk_buff *skb;
- struct freelQ_ce *ce = &fl->centries[fl->cidx];
+ const struct freelQ_ce *ce = &fl->centries[fl->cidx];
- if (len < copy_thres) {
- skb = alloc_skb(len + skb_pad, GFP_ATOMIC);
- if (likely(skb != NULL)) {
- skb_reserve(skb, skb_pad);
- skb_put(skb, len);
- pci_dma_sync_single_for_cpu(pdev,
- pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_FROMDEVICE);
- memcpy(skb->data, ce->skb->data + dma_pad, len);
- pci_dma_sync_single_for_device(pdev,
- pci_unmap_addr(ce, dma_addr),
- pci_unmap_len(ce, dma_len),
- PCI_DMA_FROMDEVICE);
- } else if (!drop_thres)
+ if (len < copybreak) {
+ skb = alloc_skb(len + 2, GFP_ATOMIC);
+ if (!skb)
goto use_orig_buf;
+ skb_reserve(skb, 2); /* align IP header */
+ skb_put(skb, len);
+ pci_dma_sync_single_for_cpu(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
+ memcpy(skb->data, ce->skb->data, len);
+ pci_dma_sync_single_for_device(pdev,
+ pci_unmap_addr(ce, dma_addr),
+ pci_unmap_len(ce, dma_len),
+ PCI_DMA_FROMDEVICE);
recycle_fl_buf(fl, fl->cidx);
return skb;
}
- if (fl->credits < drop_thres) {
+use_orig_buf:
+ if (fl->credits < 2) {
recycle_fl_buf(fl, fl->cidx);
return NULL;
}
-use_orig_buf:
pci_unmap_single(pdev, pci_unmap_addr(ce, dma_addr),
pci_unmap_len(ce, dma_len), PCI_DMA_FROMDEVICE);
skb = ce->skb;
- skb_reserve(skb, dma_pad);
+ prefetch(skb->data);
+
skb_put(skb, len);
return skb;
}
static inline unsigned int compute_large_page_tx_descs(struct sk_buff *skb)
{
unsigned int count = 0;
+
if (PAGE_SIZE > SGE_TX_DESC_MAX_PLEN) {
unsigned int nfrags = skb_shinfo(skb)->nr_frags;
unsigned int i, len = skb->len - skb->data_len;
while ((skb = sched_skb(sge, NULL, credits)) != NULL) {
unsigned int genbit, pidx, count;
count = 1 + skb_shinfo(skb)->nr_frags;
- count += compute_large_page_tx_descs(skb);
+ count += compute_large_page_tx_descs(skb);
q->in_use += count;
genbit = q->genbit;
pidx = q->pidx;
*
* Process an ingress ethernet pakcet and deliver it to the stack.
*/
-static int sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
+static void sge_rx(struct sge *sge, struct freelQ *fl, unsigned int len)
{
struct sk_buff *skb;
- struct cpl_rx_pkt *p;
+ const struct cpl_rx_pkt *p;
struct adapter *adapter = sge->adapter;
struct sge_port_stats *st;
- skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad,
- sge->rx_pkt_pad, 2, SGE_RX_COPY_THRES,
- SGE_RX_DROP_THRES);
+ skb = get_packet(adapter->pdev, fl, len - sge->rx_pkt_pad);
if (unlikely(!skb)) {
sge->stats.rx_drops++;
- return 0;
+ return;
}
- p = (struct cpl_rx_pkt *)skb->data;
- skb_pull(skb, sizeof(*p));
+ p = (const struct cpl_rx_pkt *) skb->data;
if (p->iff >= adapter->params.nports) {
kfree_skb(skb);
- return 0;
+ return;
}
+ __skb_pull(skb, sizeof(*p));
skb->dev = adapter->port[p->iff].dev;
skb->dev->last_rx = jiffies;
netif_rx(skb);
#endif
}
- return 0;
}
/*
static void restart_tx_queues(struct sge *sge)
{
struct adapter *adap = sge->adapter;
+ int i;
- if (enough_free_Tx_descs(&sge->cmdQ[0])) {
- int i;
+ if (!enough_free_Tx_descs(&sge->cmdQ[0]))
+ return;
- for_each_port(adap, i) {
- struct net_device *nd = adap->port[i].dev;
+ for_each_port(adap, i) {
+ struct net_device *nd = adap->port[i].dev;
- if (test_and_clear_bit(nd->if_port,
- &sge->stopped_tx_queues) &&
- netif_running(nd)) {
- sge->stats.cmdQ_restarted[2]++;
- netif_wake_queue(nd);
- }
+ if (test_and_clear_bit(nd->if_port, &sge->stopped_tx_queues) &&
+ netif_running(nd)) {
+ sge->stats.cmdQ_restarted[2]++;
+ netif_wake_queue(nd);
}
}
}
/*
- * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0
+ * update_tx_info is called from the interrupt handler/NAPI to return cmdQ0
* information.
*/
-static unsigned int update_tx_info(struct adapter *adapter,
- unsigned int flags,
+static unsigned int update_tx_info(struct adapter *adapter,
+ unsigned int flags,
unsigned int pr0)
{
struct sge *sge = adapter->sge;
struct sge *sge = adapter->sge;
struct respQ *q = &sge->respQ;
struct respQ_e *e = &q->entries[q->cidx];
- int budget_left = budget;
+ int done = 0;
unsigned int flags = 0;
unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
-
- while (likely(budget_left && e->GenerationBit == q->genbit)) {
+ while (done < budget && e->GenerationBit == q->genbit) {
flags |= e->Qsleeping;
-
+
cmdq_processed[0] += e->Cmdq0CreditReturn;
cmdq_processed[1] += e->Cmdq1CreditReturn;
-
+
/* We batch updates to the TX side to avoid cacheline
* ping-pong of TX state information on MP where the sender
* might run on a different CPU than this function...
*/
- if (unlikely(flags & F_CMDQ0_ENABLE || cmdq_processed[0] > 64)) {
+ if (unlikely((flags & F_CMDQ0_ENABLE) || cmdq_processed[0] > 64)) {
flags = update_tx_info(adapter, flags, cmdq_processed[0]);
cmdq_processed[0] = 0;
}
+
if (unlikely(cmdq_processed[1] > 16)) {
sge->cmdQ[1].processed += cmdq_processed[1];
cmdq_processed[1] = 0;
}
+
if (likely(e->DataValid)) {
struct freelQ *fl = &sge->freelQ[e->FreelistQid];
else
sge_rx(sge, fl, e->BufferLength);
+ ++done;
+
/*
* Note: this depends on each packet consuming a
* single free-list buffer; cf. the BUG above.
*/
if (++fl->cidx == fl->size)
fl->cidx = 0;
+ prefetch(fl->centries[fl->cidx].skb);
+
if (unlikely(--fl->credits <
fl->size - SGE_FREEL_REFILL_THRESH))
refill_free_list(sge, fl);
writel(q->credits, adapter->regs + A_SG_RSPQUEUECREDIT);
q->credits = 0;
}
- --budget_left;
}
- flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
sge->cmdQ[1].processed += cmdq_processed[1];
- budget -= budget_left;
- return budget;
+ return done;
+}
+
+static inline int responses_pending(const struct adapter *adapter)
+{
+ const struct respQ *Q = &adapter->sge->respQ;
+ const struct respQ_e *e = &Q->entries[Q->cidx];
+
+ return (e->GenerationBit == Q->genbit);
}
#ifdef CONFIG_CHELSIO_T1_NAPI
* which the caller must ensure is a valid pure response. Returns 1 if it
* encounters a valid data-carrying response, 0 otherwise.
*/
-static int process_pure_responses(struct adapter *adapter, struct respQ_e *e)
+static int process_pure_responses(struct adapter *adapter)
{
struct sge *sge = adapter->sge;
struct respQ *q = &sge->respQ;
+ struct respQ_e *e = &q->entries[q->cidx];
+ const struct freelQ *fl = &sge->freelQ[e->FreelistQid];
unsigned int flags = 0;
unsigned int cmdq_processed[SGE_CMDQ_N] = {0, 0};
+ prefetch(fl->centries[fl->cidx].skb);
+ if (e->DataValid)
+ return 1;
+
do {
flags |= e->Qsleeping;
cmdq_processed[0] += e->Cmdq0CreditReturn;
cmdq_processed[1] += e->Cmdq1CreditReturn;
-
+
e++;
if (unlikely(++q->cidx == q->size)) {
q->cidx = 0;
sge->stats.pure_rsps++;
} while (e->GenerationBit == q->genbit && !e->DataValid);
- flags = update_tx_info(adapter, flags, cmdq_processed[0]);
+ flags = update_tx_info(adapter, flags, cmdq_processed[0]);
sge->cmdQ[1].processed += cmdq_processed[1];
return e->GenerationBit == q->genbit;
int t1_poll(struct net_device *dev, int *budget)
{
struct adapter *adapter = dev->priv;
- int effective_budget = min(*budget, dev->quota);
- int work_done = process_responses(adapter, effective_budget);
+ int work_done;
+ work_done = process_responses(adapter, min(*budget, dev->quota));
*budget -= work_done;
dev->quota -= work_done;
- if (work_done >= effective_budget)
+ if (unlikely(responses_pending(adapter)))
return 1;
- spin_lock_irq(&adapter->async_lock);
- __netif_rx_complete(dev);
+ netif_rx_complete(dev);
writel(adapter->sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
- writel(adapter->slow_intr_mask | F_PL_INTR_SGE_DATA,
- adapter->regs + A_PL_ENABLE);
- spin_unlock_irq(&adapter->async_lock);
return 0;
+
}
/*
irqreturn_t t1_interrupt(int irq, void *data)
{
struct adapter *adapter = data;
- struct net_device *dev = adapter->sge->netdev;
struct sge *sge = adapter->sge;
- u32 cause;
- int handled = 0;
+ int handled;
- cause = readl(adapter->regs + A_PL_CAUSE);
- if (cause == 0 || cause == ~0)
- return IRQ_NONE;
+ if (likely(responses_pending(adapter))) {
+ struct net_device *dev = sge->netdev;
- spin_lock(&adapter->async_lock);
- if (cause & F_PL_INTR_SGE_DATA) {
- struct respQ *q = &adapter->sge->respQ;
- struct respQ_e *e = &q->entries[q->cidx];
-
- handled = 1;
- writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
-
- if (e->GenerationBit == q->genbit &&
- __netif_rx_schedule_prep(dev)) {
- if (e->DataValid || process_pure_responses(adapter, e)) {
- /* mask off data IRQ */
- writel(adapter->slow_intr_mask,
- adapter->regs + A_PL_ENABLE);
- __netif_rx_schedule(sge->netdev);
- goto unlock;
- }
- /* no data, no NAPI needed */
- netif_poll_enable(dev);
+ writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
+ if (__netif_rx_schedule_prep(dev)) {
+ if (process_pure_responses(adapter))
+ __netif_rx_schedule(dev);
+ else {
+ /* no data, no NAPI needed */
+ writel(sge->respQ.cidx, adapter->regs + A_SG_SLEEPING);
+ netif_poll_enable(dev); /* undo schedule_prep */
+ }
}
- writel(q->cidx, adapter->regs + A_SG_SLEEPING);
- } else
- handled = t1_slow_intr_handler(adapter);
+ return IRQ_HANDLED;
+ }
+
+ spin_lock(&adapter->async_lock);
+ handled = t1_slow_intr_handler(adapter);
+ spin_unlock(&adapter->async_lock);
if (!handled)
sge->stats.unhandled_irqs++;
-unlock:
- spin_unlock(&adapter->async_lock);
+
return IRQ_RETVAL(handled != 0);
}
irqreturn_t t1_interrupt(int irq, void *cookie)
{
int work_done;
- struct respQ_e *e;
struct adapter *adapter = cookie;
- struct respQ *Q = &adapter->sge->respQ;
spin_lock(&adapter->async_lock);
- e = &Q->entries[Q->cidx];
- prefetch(e);
writel(F_PL_INTR_SGE_DATA, adapter->regs + A_PL_CAUSE);
- if (likely(e->GenerationBit == Q->genbit))
+ if (likely(responses_pending(adapter)))
work_done = process_responses(adapter, -1);
else
work_done = t1_slow_intr_handler(adapter);
* through the scheduler.
*/
if (sge->tx_sched && !qid && skb->dev) {
- use_sched:
+use_sched:
use_sched_skb = 1;
/* Note that the scheduler might return a different skb than
* the one passed in.
cpl = (struct cpl_tx_pkt *)hdr;
} else {
/*
- * Packets shorter than ETH_HLEN can break the MAC, drop them
+ * Packets shorter than ETH_HLEN can break the MAC, drop them
* early. Also, we may get oversized packets because some
* parts of the kernel don't handle our unusual hard_header_len
* right, drop those too.
* then silently discard to avoid leak.
*/
if (unlikely(ret != NETDEV_TX_OK && skb != orig_skb)) {
- dev_kfree_skb_any(skb);
+ dev_kfree_skb_any(skb);
ret = NETDEV_TX_OK;
- }
+ }
return ret;
}
if (adapter->open_device_map & PORT_MASK) {
int i;
- if (t1_espi_get_mon_t204(adapter, &(seop[0]), 0) < 0) {
+
+ if (t1_espi_get_mon_t204(adapter, &(seop[0]), 0) < 0)
return;
- }
+
for (i = 0; i < nports; i++) {
- struct sk_buff *skb = sge->espibug_skb[i];
- if ( (netif_running(adapter->port[i].dev)) &&
- !(netif_queue_stopped(adapter->port[i].dev)) &&
- (seop[i] && ((seop[i] & 0xfff) == 0)) &&
- skb ) {
- if (!skb->cb[0]) {
- u8 ch_mac_addr[ETH_ALEN] =
- {0x0, 0x7, 0x43, 0x0, 0x0, 0x0};
- memcpy(skb->data + sizeof(struct cpl_tx_pkt),
- ch_mac_addr, ETH_ALEN);
- memcpy(skb->data + skb->len - 10,
- ch_mac_addr, ETH_ALEN);
- skb->cb[0] = 0xff;
- }
-
- /* bump the reference count to avoid freeing of
- * the skb once the DMA has completed.
- */
- skb = skb_get(skb);
- t1_sge_tx(skb, adapter, 0, adapter->port[i].dev);
+ struct sk_buff *skb = sge->espibug_skb[i];
+
+ if (!netif_running(adapter->port[i].dev) ||
+ netif_queue_stopped(adapter->port[i].dev) ||
+ !seop[i] || ((seop[i] & 0xfff) != 0) || !skb)
+ continue;
+
+ if (!skb->cb[0]) {
+ u8 ch_mac_addr[ETH_ALEN] = {
+ 0x0, 0x7, 0x43, 0x0, 0x0, 0x0
+ };
+
+ memcpy(skb->data + sizeof(struct cpl_tx_pkt),
+ ch_mac_addr, ETH_ALEN);
+ memcpy(skb->data + skb->len - 10,
+ ch_mac_addr, ETH_ALEN);
+ skb->cb[0] = 0xff;
}
+
+ /* bump the reference count to avoid freeing of
+ * the skb once the DMA has completed.
+ */
+ skb = skb_get(skb);
+ t1_sge_tx(skb, adapter, 0, adapter->port[i].dev);
}
}
mod_timer(&sge->espibug_timer, jiffies + sge->espibug_timeout);
if (adapter->params.nports > 1) {
tx_sched_init(sge);
sge->espibug_timer.function = espibug_workaround_t204;
- } else {
+ } else
sge->espibug_timer.function = espibug_workaround;
- }
sge->espibug_timer.data = (unsigned long)sge->adapter;
sge->espibug_timeout = 1;
if (adapter->params.nports > 1)
sge->espibug_timeout = HZ/100;
}
-
+
p->cmdQ_size[0] = SGE_CMDQ0_E_N;
p->cmdQ_size[1] = SGE_CMDQ1_E_N;
t1_sge_intr_error_handler(adapter->sge);
if (cause & FPGA_PCIX_INTERRUPT_GMAC)
- fpga_phy_intr_handler(adapter);
+ fpga_phy_intr_handler(adapter);
if (cause & FPGA_PCIX_INTERRUPT_TP) {
- /*
+ /*
* FPGA doesn't support MC4 interrupts and it requires
* this odd layer of indirection for MC5.
- */
+ */
u32 tp_cause = readl(adapter->regs + FPGA_TP_ADDR_INTERRUPT_CAUSE);
/* Clear TP interrupt */
udelay(10);
} while (busy && --attempts);
if (busy)
- CH_ALERT("%s: MDIO operation timed out\n",
- adapter->name);
+ CH_ALERT("%s: MDIO operation timed out\n", adapter->name);
return busy;
}
switch (board_info(adapter)->board) {
#ifdef CONFIG_CHELSIO_T1_1G
- case CHBT_BOARD_CHT204:
- case CHBT_BOARD_CHT204E:
- case CHBT_BOARD_CHN204:
- case CHBT_BOARD_CHT204V: {
- int i, port_bit;
+ case CHBT_BOARD_CHT204:
+ case CHBT_BOARD_CHT204E:
+ case CHBT_BOARD_CHN204:
+ case CHBT_BOARD_CHT204V: {
+ int i, port_bit;
for_each_port(adapter, i) {
port_bit = i + 1;
- if (!(cause & (1 << port_bit))) continue;
+ if (!(cause & (1 << port_bit)))
+ continue;
- phy = adapter->port[i].phy;
+ phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
t1_link_changed(adapter, i);
}
- break;
- }
+ break;
+ }
case CHBT_BOARD_CHT101:
if (cause & ELMER0_GP_BIT1) { /* Marvell 88E1111 interrupt */
phy = adapter->port[0].phy;
break;
case CHBT_BOARD_7500: {
int p;
- /*
+ /*
* Elmer0's interrupt cause isn't useful here because there is
* only one bit that can be set for all 4 ports. This means
* we are forced to check every PHY's interrupt status
* register to see who initiated the interrupt.
- */
- for_each_port(adapter, p) {
+ */
+ for_each_port(adapter, p) {
phy = adapter->port[p].phy;
phy_cause = phy->ops->interrupt_handler(phy);
if (phy_cause & cphy_cause_link_change)
break;
case CHBT_BOARD_8000:
case CHBT_BOARD_CHT110:
- CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
+ CH_DBG(adapter, INTR, "External interrupt cause 0x%x\n",
cause);
if (cause & ELMER0_GP_BIT1) { /* PMC3393 INTB */
struct cmac *mac = adapter->port[0].mac;
t1_tpi_read(adapter,
A_ELMER0_GPI_STAT, &mod_detect);
- CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
+ CH_MSG(adapter, INFO, LINK, "XPAK %s\n",
mod_detect ? "removed" : "inserted");
- }
+ }
break;
#ifdef CONFIG_CHELSIO_T1_COUGAR
case CHBT_BOARD_COUGAR:
for_each_port(adapter, i) {
port_bit = i ? i + 1 : 0;
- if (!(cause & (1 << port_bit))) continue;
+ if (!(cause & (1 << port_bit)))
+ continue;
phy = adapter->port[i].phy;
phy_cause = phy->ops->interrupt_handler(phy);
/* Disable PCIX & external chip interrupts. */
if (t1_is_asic(adapter))
- writel(0, adapter->regs + A_PL_ENABLE);
+ writel(0, adapter->regs + A_PL_ENABLE);
/* PCI-X interrupts */
pci_write_config_dword(adapter->pdev, A_PCICFG_INTR_ENABLE, 0);
/* Power sequencing is a work-around for Intel's XPAKs. */
static void power_sequence_xpak(adapter_t* adapter)
{
- u32 mod_detect;
- u32 gpo;
+ u32 mod_detect;
+ u32 gpo;
- /* Check for XPAK */
- t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
+ /* Check for XPAK */
+ t1_tpi_read(adapter, A_ELMER0_GPI_STAT, &mod_detect);
if (!(ELMER0_GP_BIT5 & mod_detect)) {
/* XPAK is present */
t1_tpi_read(adapter, A_ELMER0_GPO, &gpo);
case CHBT_BOARD_N210:
case CHBT_BOARD_CHT210:
case CHBT_BOARD_COUGAR:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x800);
break;
case CHBT_BOARD_CHT110:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x1800);
- /* TBD XXX Might not need. This fixes a problem
- * described in the Intel SR XPAK errata.
- */
- power_sequence_xpak(adapter);
+ /* TBD XXX Might not need. This fixes a problem
+ * described in the Intel SR XPAK errata.
+ */
+ power_sequence_xpak(adapter);
break;
#ifdef CONFIG_CHELSIO_T1_1G
- case CHBT_BOARD_CHT204E:
- /* add config space write here */
+ case CHBT_BOARD_CHT204E:
+ /* add config space write here */
case CHBT_BOARD_CHT204:
case CHBT_BOARD_CHT204V:
case CHBT_BOARD_CHN204:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
- break;
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x804);
+ break;
case CHBT_BOARD_CHT101:
case CHBT_BOARD_7500:
- t1_tpi_par(adapter, 0xf);
- t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
+ t1_tpi_par(adapter, 0xf);
+ t1_tpi_write(adapter, A_ELMER0_GPO, 0x1804);
break;
#endif
}
goto out_err;
err = 0;
- out_err:
+out_err:
return err;
}
if (adapter->espi)
t1_espi_destroy(adapter->espi);
#ifdef CONFIG_CHELSIO_T1_COUGAR
- if (adapter->cspi)
+ if (adapter->cspi)
t1_cspi_destroy(adapter->cspi);
#endif
}
CH_ERR("%s: CSPI initialization failed\n",
adapter->name);
goto error;
- }
+ }
#endif
/*
static void tp_init(adapter_t * ap, const struct tp_params *p,
unsigned int tp_clk)
{
- if (t1_is_asic(ap)) {
- u32 val;
-
- val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
- F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
- if (!p->pm_size)
- val |= F_OFFLOAD_DISABLE;
- else
- val |= F_TP_IN_ESPI_CHECK_IP_CSUM |
- F_TP_IN_ESPI_CHECK_TCP_CSUM;
- writel(val, ap->regs + A_TP_IN_CONFIG);
- writel(F_TP_OUT_CSPI_CPL |
- F_TP_OUT_ESPI_ETHERNET |
- F_TP_OUT_ESPI_GENERATE_IP_CSUM |
- F_TP_OUT_ESPI_GENERATE_TCP_CSUM,
- ap->regs + A_TP_OUT_CONFIG);
- writel(V_IP_TTL(64) |
- F_PATH_MTU /* IP DF bit */ |
- V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
- V_SYN_COOKIE_PARAMETER(29),
- ap->regs + A_TP_GLOBAL_CONFIG);
- /*
- * Enable pause frame deadlock prevention.
- */
- if (is_T2(ap) && ap->params.nports > 1) {
- u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
-
- writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
- V_DROP_TICKS_CNT(drop_ticks) |
- V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
- ap->regs + A_TP_TX_DROP_CONFIG);
- }
+ u32 val;
+ if (!t1_is_asic(ap))
+ return;
+
+ val = F_TP_IN_CSPI_CPL | F_TP_IN_CSPI_CHECK_IP_CSUM |
+ F_TP_IN_CSPI_CHECK_TCP_CSUM | F_TP_IN_ESPI_ETHERNET;
+ if (!p->pm_size)
+ val |= F_OFFLOAD_DISABLE;
+ else
+ val |= F_TP_IN_ESPI_CHECK_IP_CSUM | F_TP_IN_ESPI_CHECK_TCP_CSUM;
+ writel(val, ap->regs + A_TP_IN_CONFIG);
+ writel(F_TP_OUT_CSPI_CPL |
+ F_TP_OUT_ESPI_ETHERNET |
+ F_TP_OUT_ESPI_GENERATE_IP_CSUM |
+ F_TP_OUT_ESPI_GENERATE_TCP_CSUM, ap->regs + A_TP_OUT_CONFIG);
+ writel(V_IP_TTL(64) |
+ F_PATH_MTU /* IP DF bit */ |
+ V_5TUPLE_LOOKUP(p->use_5tuple_mode) |
+ V_SYN_COOKIE_PARAMETER(29), ap->regs + A_TP_GLOBAL_CONFIG);
+ /*
+ * Enable pause frame deadlock prevention.
+ */
+ if (is_T2(ap) && ap->params.nports > 1) {
+ u32 drop_ticks = DROP_MSEC * (tp_clk / 1000);
+
+ writel(F_ENABLE_TX_DROP | F_ENABLE_TX_ERROR |
+ V_DROP_TICKS_CNT(drop_ticks) |
+ V_NUM_PKTS_DROPPED(DROP_PKTS_CNT),
+ ap->regs + A_TP_TX_DROP_CONFIG);
}
}
struct petp *__devinit t1_tp_create(adapter_t * adapter, struct tp_params *p)
{
struct petp *tp = kzalloc(sizeof(*tp), GFP_KERNEL);
+
if (!tp)
return NULL;
if (ib[i].addr == INITBLOCK_SLEEP) {
udelay( ib[i].data );
CH_ERR("sleep %d us\n",ib[i].data);
- } else {
+ } else
vsc_write( adapter, ib[i].addr, ib[i].data );
- }
}
}
static int bist_rd(adapter_t *adapter, int moduleid, int address)
{
- int data=0;
- u32 result=0;
-
- if( (address != 0x0) &&
- (address != 0x1) &&
- (address != 0x2) &&
- (address != 0xd) &&
- (address != 0xe))
+ int data = 0;
+ u32 result = 0;
+
+ if ((address != 0x0) &&
+ (address != 0x1) &&
+ (address != 0x2) &&
+ (address != 0xd) &&
+ (address != 0xe))
CH_ERR("No bist address: 0x%x\n", address);
data = ((0x00 << 24) | ((address & 0xff) << 16) | (0x00 << 8) |
udelay(10);
vsc_read(adapter, REG_RAM_BIST_RESULT, &result);
- if((result & (1<<9)) != 0x0)
+ if ((result & (1 << 9)) != 0x0)
CH_ERR("Still in bist read: 0x%x\n", result);
- else if((result & (1<<8)) != 0x0)
+ else if ((result & (1 << 8)) != 0x0)
CH_ERR("bist read error: 0x%x\n", result);
- return(result & 0xff);
+ return (result & 0xff);
}
static int bist_wr(adapter_t *adapter, int moduleid, int address, int value)
{
- int data=0;
- u32 result=0;
-
- if( (address != 0x0) &&
- (address != 0x1) &&
- (address != 0x2) &&
- (address != 0xd) &&
- (address != 0xe))
+ int data = 0;
+ u32 result = 0;
+
+ if ((address != 0x0) &&
+ (address != 0x1) &&
+ (address != 0x2) &&
+ (address != 0xd) &&
+ (address != 0xe))
CH_ERR("No bist address: 0x%x\n", address);
- if( value>255 )
+ if (value > 255)
CH_ERR("Suspicious write out of range value: 0x%x\n", value);
data = ((0x01 << 24) | ((address & 0xff) << 16) | (value << 8) |
udelay(5);
vsc_read(adapter, REG_RAM_BIST_CMD, &result);
- if((result & (1<<27)) != 0x0)
+ if ((result & (1 << 27)) != 0x0)
CH_ERR("Still in bist write: 0x%x\n", result);
- else if((result & (1<<26)) != 0x0)
+ else if ((result & (1 << 26)) != 0x0)
CH_ERR("bist write error: 0x%x\n", result);
- return(0);
+ return 0;
}
static int run_bist(adapter_t *adapter, int moduleid)
(void) bist_wr(adapter,moduleid, 0x00, 0x02);
(void) bist_wr(adapter,moduleid, 0x01, 0x01);
- return(0);
+ return 0;
}
static int check_bist(adapter_t *adapter, int moduleid)
if ((result & 3) != 0x3)
CH_ERR("Result: 0x%x BIST error in ram %d, column: 0x%04x\n",
result, moduleid, column);
- return(0);
+ return 0;
}
static int enable_mem(adapter_t *adapter, int moduleid)
{
/*enable mem*/
(void) bist_wr(adapter,moduleid, 0x00, 0x00);
- return(0);
+ return 0;
}
static int run_bist_all(adapter_t *adapter)
{
- int port=0;
- u32 val=0;
+ int port = 0;
+ u32 val = 0;
vsc_write(adapter, REG_MEM_BIST, 0x5);
vsc_read(adapter, REG_MEM_BIST, &val);
- for(port=0; port<12; port++){
+ for (port = 0; port < 12; port++)
vsc_write(adapter, REG_DEV_SETUP(port), 0x0);
- }
udelay(300);
vsc_write(adapter, REG_SPI4_MISC, 0x00040409);
udelay(300);
vsc_write(adapter, REG_SPI4_MISC, 0x60040400);
udelay(300);
- for(port=0; port<12; port++){
+ for (port = 0; port < 12; port++)
vsc_write(adapter, REG_DEV_SETUP(port), 0x1);
- }
+
udelay(300);
vsc_write(adapter, REG_MEM_BIST, 0x0);
mdelay(10);
- return(0);
+ return 0;
}
static int mac_intr_handler(struct cmac *mac)
static void port_stats_update(struct cmac *mac)
{
- int port = mac->instance->index;
+ struct {
+ unsigned int reg;
+ unsigned int offset;
+ } hw_stats[] = {
+
+#define HW_STAT(reg, stat_name) \
+ { reg, (&((struct cmac_statistics *)NULL)->stat_name) - (u64 *)NULL }
+
+ /* Rx stats */
+ HW_STAT(RxUnicast, RxUnicastFramesOK),
+ HW_STAT(RxMulticast, RxMulticastFramesOK),
+ HW_STAT(RxBroadcast, RxBroadcastFramesOK),
+ HW_STAT(Crc, RxFCSErrors),
+ HW_STAT(RxAlignment, RxAlignErrors),
+ HW_STAT(RxOversize, RxFrameTooLongErrors),
+ HW_STAT(RxPause, RxPauseFrames),
+ HW_STAT(RxJabbers, RxJabberErrors),
+ HW_STAT(RxFragments, RxRuntErrors),
+ HW_STAT(RxUndersize, RxRuntErrors),
+ HW_STAT(RxSymbolCarrier, RxSymbolErrors),
+ HW_STAT(RxSize1519ToMax, RxJumboFramesOK),
+
+ /* Tx stats (skip collision stats as we are full-duplex only) */
+ HW_STAT(TxUnicast, TxUnicastFramesOK),
+ HW_STAT(TxMulticast, TxMulticastFramesOK),
+ HW_STAT(TxBroadcast, TxBroadcastFramesOK),
+ HW_STAT(TxPause, TxPauseFrames),
+ HW_STAT(TxUnderrun, TxUnderrun),
+ HW_STAT(TxSize1519ToMax, TxJumboFramesOK),
+ }, *p = hw_stats;
+ unsigned int port = mac->instance->index;
+ u64 *stats = (u64 *)&mac->stats;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(hw_stats); i++)
+ rmon_update(mac, CRA(0x4, port, p->reg), stats + p->offset);
- /* Rx stats */
+ rmon_update(mac, REG_TX_OK_BYTES(port), &mac->stats.TxOctetsOK);
rmon_update(mac, REG_RX_OK_BYTES(port), &mac->stats.RxOctetsOK);
rmon_update(mac, REG_RX_BAD_BYTES(port), &mac->stats.RxOctetsBad);
- rmon_update(mac, REG_RX_UNICAST(port), &mac->stats.RxUnicastFramesOK);
- rmon_update(mac, REG_RX_MULTICAST(port),
- &mac->stats.RxMulticastFramesOK);
- rmon_update(mac, REG_RX_BROADCAST(port),
- &mac->stats.RxBroadcastFramesOK);
- rmon_update(mac, REG_CRC(port), &mac->stats.RxFCSErrors);
- rmon_update(mac, REG_RX_ALIGNMENT(port), &mac->stats.RxAlignErrors);
- rmon_update(mac, REG_RX_OVERSIZE(port),
- &mac->stats.RxFrameTooLongErrors);
- rmon_update(mac, REG_RX_PAUSE(port), &mac->stats.RxPauseFrames);
- rmon_update(mac, REG_RX_JABBERS(port), &mac->stats.RxJabberErrors);
- rmon_update(mac, REG_RX_FRAGMENTS(port), &mac->stats.RxRuntErrors);
- rmon_update(mac, REG_RX_UNDERSIZE(port), &mac->stats.RxRuntErrors);
- rmon_update(mac, REG_RX_SYMBOL_CARRIER(port),
- &mac->stats.RxSymbolErrors);
- rmon_update(mac, REG_RX_SIZE_1519_TO_MAX(port),
- &mac->stats.RxJumboFramesOK);
-
- /* Tx stats (skip collision stats as we are full-duplex only) */
- rmon_update(mac, REG_TX_OK_BYTES(port), &mac->stats.TxOctetsOK);
- rmon_update(mac, REG_TX_UNICAST(port), &mac->stats.TxUnicastFramesOK);
- rmon_update(mac, REG_TX_MULTICAST(port),
- &mac->stats.TxMulticastFramesOK);
- rmon_update(mac, REG_TX_BROADCAST(port),
- &mac->stats.TxBroadcastFramesOK);
- rmon_update(mac, REG_TX_PAUSE(port), &mac->stats.TxPauseFrames);
- rmon_update(mac, REG_TX_UNDERRUN(port), &mac->stats.TxUnderrun);
- rmon_update(mac, REG_TX_SIZE_1519_TO_MAX(port),
- &mac->stats.TxJumboFramesOK);
}
/*
int i;
mac = kzalloc(sizeof(*mac) + sizeof(cmac_instance), GFP_KERNEL);
- if (!mac) return NULL;
+ if (!mac)
+ return NULL;
mac->ops = &vsc7326_ops;
mac->instance = (cmac_instance *)(mac + 1);
#define REG_HDX(pn) CRA(0x1,pn,0x19) /* Half-duplex config */
/* Statistics */
+/* CRA(0x4,pn,reg) */
+/* reg below */
/* pn = port number, 0-a, a = 10GbE */
-#define REG_RX_IN_BYTES(pn) CRA(0x4,pn,0x00) /* # Rx in octets */
-#define REG_RX_SYMBOL_CARRIER(pn) CRA(0x4,pn,0x01) /* Frames w/ symbol errors */
-#define REG_RX_PAUSE(pn) CRA(0x4,pn,0x02) /* # pause frames received */
-#define REG_RX_UNSUP_OPCODE(pn) CRA(0x4,pn,0x03) /* # control frames with unsupported opcode */
-#define REG_RX_OK_BYTES(pn) CRA(0x4,pn,0x04) /* # octets in good frames */
-#define REG_RX_BAD_BYTES(pn) CRA(0x4,pn,0x05) /* # octets in bad frames */
-#define REG_RX_UNICAST(pn) CRA(0x4,pn,0x06) /* # good unicast frames */
-#define REG_RX_MULTICAST(pn) CRA(0x4,pn,0x07) /* # good multicast frames */
-#define REG_RX_BROADCAST(pn) CRA(0x4,pn,0x08) /* # good broadcast frames */
-#define REG_CRC(pn) CRA(0x4,pn,0x09) /* # frames w/ bad CRC only */
-#define REG_RX_ALIGNMENT(pn) CRA(0x4,pn,0x0a) /* # frames w/ alignment err */
-#define REG_RX_UNDERSIZE(pn) CRA(0x4,pn,0x0b) /* # frames undersize */
-#define REG_RX_FRAGMENTS(pn) CRA(0x4,pn,0x0c) /* # frames undersize w/ crc err */
-#define REG_RX_IN_RANGE_LENGTH_ERROR(pn) CRA(0x4,pn,0x0d) /* # frames with length error */
-#define REG_RX_OUT_OF_RANGE_ERROR(pn) CRA(0x4,pn,0x0e) /* # frames with illegal length field */
-#define REG_RX_OVERSIZE(pn) CRA(0x4,pn,0x0f) /* # frames oversize */
-#define REG_RX_JABBERS(pn) CRA(0x4,pn,0x10) /* # frames oversize w/ crc err */
-#define REG_RX_SIZE_64(pn) CRA(0x4,pn,0x11) /* # frames 64 octets long */
-#define REG_RX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x12) /* # frames 65-127 octets */
-#define REG_RX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x13) /* # frames 128-255 */
-#define REG_RX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x14) /* # frames 256-511 */
-#define REG_RX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x15) /* # frames 512-1023 */
-#define REG_RX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x16) /* # frames 1024-1518 */
-#define REG_RX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x17) /* # frames 1519-max */
-#define REG_TX_OUT_BYTES(pn) CRA(0x4,pn,0x18) /* # octets tx */
-#define REG_TX_PAUSE(pn) CRA(0x4,pn,0x19) /* # pause frames sent */
-#define REG_TX_OK_BYTES(pn) CRA(0x4,pn,0x1a) /* # octets tx OK */
-#define REG_TX_UNICAST(pn) CRA(0x4,pn,0x1b) /* # frames unicast */
-#define REG_TX_MULTICAST(pn) CRA(0x4,pn,0x1c) /* # frames multicast */
-#define REG_TX_BROADCAST(pn) CRA(0x4,pn,0x1d) /* # frames broadcast */
-#define REG_TX_MULTIPLE_COLL(pn) CRA(0x4,pn,0x1e) /* # frames tx after multiple collisions */
-#define REG_TX_LATE_COLL(pn) CRA(0x4,pn,0x1f) /* # late collisions detected */
-#define REG_TX_XCOLL(pn) CRA(0x4,pn,0x20) /* # frames lost, excessive collisions */
-#define REG_TX_DEFER(pn) CRA(0x4,pn,0x21) /* # frames deferred on first tx attempt */
-#define REG_TX_XDEFER(pn) CRA(0x4,pn,0x22) /* # frames excessively deferred */
-#define REG_TX_CSENSE(pn) CRA(0x4,pn,0x23) /* carrier sense errors at frame end */
-#define REG_TX_SIZE_64(pn) CRA(0x4,pn,0x24) /* # frames 64 octets long */
-#define REG_TX_SIZE_65_TO_127(pn) CRA(0x4,pn,0x25) /* # frames 65-127 octets */
-#define REG_TX_SIZE_128_TO_255(pn) CRA(0x4,pn,0x26) /* # frames 128-255 */
-#define REG_TX_SIZE_256_TO_511(pn) CRA(0x4,pn,0x27) /* # frames 256-511 */
-#define REG_TX_SIZE_512_TO_1023(pn) CRA(0x4,pn,0x28) /* # frames 512-1023 */
-#define REG_TX_SIZE_1024_TO_1518(pn) CRA(0x4,pn,0x29) /* # frames 1024-1518 */
-#define REG_TX_SIZE_1519_TO_MAX(pn) CRA(0x4,pn,0x2a) /* # frames 1519-max */
-#define REG_TX_SINGLE_COLL(pn) CRA(0x4,pn,0x2b) /* # frames tx after single collision */
-#define REG_TX_BACKOFF2(pn) CRA(0x4,pn,0x2c) /* # frames tx ok after 2 backoffs/collisions */
-#define REG_TX_BACKOFF3(pn) CRA(0x4,pn,0x2d) /* after 3 backoffs/collisions */
-#define REG_TX_BACKOFF4(pn) CRA(0x4,pn,0x2e) /* after 4 */
-#define REG_TX_BACKOFF5(pn) CRA(0x4,pn,0x2f) /* after 5 */
-#define REG_TX_BACKOFF6(pn) CRA(0x4,pn,0x30) /* after 6 */
-#define REG_TX_BACKOFF7(pn) CRA(0x4,pn,0x31) /* after 7 */
-#define REG_TX_BACKOFF8(pn) CRA(0x4,pn,0x32) /* after 8 */
-#define REG_TX_BACKOFF9(pn) CRA(0x4,pn,0x33) /* after 9 */
-#define REG_TX_BACKOFF10(pn) CRA(0x4,pn,0x34) /* after 10 */
-#define REG_TX_BACKOFF11(pn) CRA(0x4,pn,0x35) /* after 11 */
-#define REG_TX_BACKOFF12(pn) CRA(0x4,pn,0x36) /* after 12 */
-#define REG_TX_BACKOFF13(pn) CRA(0x4,pn,0x37) /* after 13 */
-#define REG_TX_BACKOFF14(pn) CRA(0x4,pn,0x38) /* after 14 */
-#define REG_TX_BACKOFF15(pn) CRA(0x4,pn,0x39) /* after 15 */
-#define REG_TX_UNDERRUN(pn) CRA(0x4,pn,0x3a) /* # frames dropped from underrun */
-#define REG_RX_XGMII_PROT_ERR CRA(0x4,0xa,0x3b) /* # protocol errors detected on XGMII interface */
-#define REG_RX_IPG_SHRINK(pn) CRA(0x4,pn,0x3c) /* # of IPG shrinks detected */
+enum {
+ RxInBytes = 0x00, // # Rx in octets
+ RxSymbolCarrier = 0x01, // Frames w/ symbol errors
+ RxPause = 0x02, // # pause frames received
+ RxUnsupOpcode = 0x03, // # control frames with unsupported opcode
+ RxOkBytes = 0x04, // # octets in good frames
+ RxBadBytes = 0x05, // # octets in bad frames
+ RxUnicast = 0x06, // # good unicast frames
+ RxMulticast = 0x07, // # good multicast frames
+ RxBroadcast = 0x08, // # good broadcast frames
+ Crc = 0x09, // # frames w/ bad CRC only
+ RxAlignment = 0x0a, // # frames w/ alignment err
+ RxUndersize = 0x0b, // # frames undersize
+ RxFragments = 0x0c, // # frames undersize w/ crc err
+ RxInRangeLengthError = 0x0d, // # frames with length error
+ RxOutOfRangeError = 0x0e, // # frames with illegal length field
+ RxOversize = 0x0f, // # frames oversize
+ RxJabbers = 0x10, // # frames oversize w/ crc err
+ RxSize64 = 0x11, // # frames 64 octets long
+ RxSize65To127 = 0x12, // # frames 65-127 octets
+ RxSize128To255 = 0x13, // # frames 128-255
+ RxSize256To511 = 0x14, // # frames 256-511
+ RxSize512To1023 = 0x15, // # frames 512-1023
+ RxSize1024To1518 = 0x16, // # frames 1024-1518
+ RxSize1519ToMax = 0x17, // # frames 1519-max
-#define REG_STAT_STICKY1G(pn) CRA(0x4,pn,0x3e) /* tri-speed sticky bits */
-#define REG_STAT_STICKY10G CRA(0x4,0xa,0x3e) /* 10GbE sticky bits */
-#define REG_STAT_INIT(pn) CRA(0x4,pn,0x3f) /* Clear all statistics */
+ TxOutBytes = 0x18, // # octets tx
+ TxPause = 0x19, // # pause frames sent
+ TxOkBytes = 0x1a, // # octets tx OK
+ TxUnicast = 0x1b, // # frames unicast
+ TxMulticast = 0x1c, // # frames multicast
+ TxBroadcast = 0x1d, // # frames broadcast
+ TxMultipleColl = 0x1e, // # frames tx after multiple collisions
+ TxLateColl = 0x1f, // # late collisions detected
+ TxXcoll = 0x20, // # frames lost, excessive collisions
+ TxDefer = 0x21, // # frames deferred on first tx attempt
+ TxXdefer = 0x22, // # frames excessively deferred
+ TxCsense = 0x23, // carrier sense errors at frame end
+ TxSize64 = 0x24, // # frames 64 octets long
+ TxSize65To127 = 0x25, // # frames 65-127 octets
+ TxSize128To255 = 0x26, // # frames 128-255
+ TxSize256To511 = 0x27, // # frames 256-511
+ TxSize512To1023 = 0x28, // # frames 512-1023
+ TxSize1024To1518 = 0x29, // # frames 1024-1518
+ TxSize1519ToMax = 0x2a, // # frames 1519-max
+ TxSingleColl = 0x2b, // # frames tx after single collision
+ TxBackoff2 = 0x2c, // # frames tx ok after 2 backoffs/collisions
+ TxBackoff3 = 0x2d, // after 3 backoffs/collisions
+ TxBackoff4 = 0x2e, // after 4
+ TxBackoff5 = 0x2f, // after 5
+ TxBackoff6 = 0x30, // after 6
+ TxBackoff7 = 0x31, // after 7
+ TxBackoff8 = 0x32, // after 8
+ TxBackoff9 = 0x33, // after 9
+ TxBackoff10 = 0x34, // after 10
+ TxBackoff11 = 0x35, // after 11
+ TxBackoff12 = 0x36, // after 12
+ TxBackoff13 = 0x37, // after 13
+ TxBackoff14 = 0x38, // after 14
+ TxBackoff15 = 0x39, // after 15
+ TxUnderrun = 0x3a, // # frames dropped from underrun
+ // Hole. See REG_RX_XGMII_PROT_ERR below.
+ RxIpgShrink = 0x3c, // # of IPG shrinks detected
+ // Duplicate. See REG_STAT_STICKY10G below.
+ StatSticky1G = 0x3e, // tri-speed sticky bits
+ StatInit = 0x3f // Clear all statistics
+};
+
+#define REG_RX_XGMII_PROT_ERR CRA(0x4,0xa,0x3b) /* # protocol errors detected on XGMII interface */
+#define REG_STAT_STICKY10G CRA(0x4,0xa,StatSticky1G) /* 10GbE sticky bits */
+
+#define REG_RX_OK_BYTES(pn) CRA(0x4,pn,RxOkBytes)
+#define REG_RX_BAD_BYTES(pn) CRA(0x4,pn,RxBadBytes)
+#define REG_TX_OK_BYTES(pn) CRA(0x4,pn,TxOkBytes)
/* MII-Management Block registers */
/* These are for MII-M interface 0, which is the bidirectional LVTTL one. If
};
#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
- VSC_INTR_NEG_DONE)
+ VSC_INTR_NEG_DONE)
#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
VSC_INTR_ENABLE)
{
simple_mdio_write(cphy, VSC8244_INTR_ENABLE, INTR_MASK);
- /* Enable interrupts through Elmer */
+ /* Enable interrupts through Elmer */
if (t1_is_asic(cphy->adapter)) {
u32 elmer;
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer |= ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
+ if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
- }
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
- return 0;
+ return 0;
}
static int vsc8244_intr_disable(struct cphy *cphy)
t1_tpi_read(cphy->adapter, A_ELMER0_INT_ENABLE, &elmer);
elmer &= ~ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
+ if (is_T2(cphy->adapter))
elmer &= ~(ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4);
- }
t1_tpi_write(cphy->adapter, A_ELMER0_INT_ENABLE, elmer);
}
- return 0;
+ return 0;
}
static int vsc8244_intr_clear(struct cphy *cphy)
{
u32 val;
- u32 elmer;
+ u32 elmer;
/* Clear PHY interrupts by reading the register. */
simple_mdio_read(cphy, VSC8244_INTR_ENABLE, &val);
if (t1_is_asic(cphy->adapter)) {
t1_tpi_read(cphy->adapter, A_ELMER0_INT_CAUSE, &elmer);
elmer |= ELMER0_GP_BIT1;
- if (is_T2(cphy->adapter)) {
+ if (is_T2(cphy->adapter))
elmer |= ELMER0_GP_BIT2|ELMER0_GP_BIT3|ELMER0_GP_BIT4;
- }
t1_tpi_write(cphy->adapter, A_ELMER0_INT_CAUSE, elmer);
}
- return 0;
+ return 0;
}
/*
int t1_mdio_set_bits(struct cphy *phy, int mmd, int reg, unsigned int bits)
{
- int ret;
- unsigned int val;
+ int ret;
+ unsigned int val;
- ret = mdio_read(phy, mmd, reg, &val);
- if (!ret)
- ret = mdio_write(phy, mmd, reg, val | bits);
- return ret;
+ ret = mdio_read(phy, mmd, reg, &val);
+ if (!ret)
+ ret = mdio_write(phy, mmd, reg, val | bits);
+ return ret;
}
static int vsc8244_autoneg_enable(struct cphy *cphy)
}
static int vsc8244_get_link_status(struct cphy *cphy, int *link_ok,
- int *speed, int *duplex, int *fc)
+ int *speed, int *duplex, int *fc)
{
unsigned int bmcr, status, lpa, adv;
int err, sp = -1, dplx = -1, pause = 0;
.get_link_status = vsc8244_get_link_status
};
-static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr, struct mdio_ops *mdio_ops)
+static struct cphy* vsc8244_phy_create(adapter_t *adapter, int phy_addr,
+ struct mdio_ops *mdio_ops)
{
struct cphy *cphy = kzalloc(sizeof(*cphy), GFP_KERNEL);
- if (!cphy) return NULL;
+ if (!cphy)
+ return NULL;
cphy_init(cphy, adapter, phy_addr, &vsc8244_ops, mdio_ops);
--- /dev/null
+#
+# Chelsio T3 driver
+#
+
+obj-$(CONFIG_CHELSIO_T3) += cxgb3.o
+
+cxgb3-objs := cxgb3_main.o ael1002.o vsc8211.o t3_hw.o mc5.o \
+ xgmac.o sge.o l2t.o cxgb3_offload.o
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+/* This file should not be included directly. Include common.h instead. */
+
+#ifndef __T3_ADAPTER_H__
+#define __T3_ADAPTER_H__
+
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/interrupt.h>
+#include <linux/timer.h>
+#include <linux/cache.h>
+#include <linux/mutex.h>
+#include "t3cdev.h"
+#include <asm/semaphore.h>
+#include <asm/bitops.h>
+#include <asm/io.h>
+
+typedef irqreturn_t(*intr_handler_t) (int, void *);
+
+struct vlan_group;
+
+struct port_info {
+ struct vlan_group *vlan_grp;
+ const struct port_type_info *port_type;
+ u8 port_id;
+ u8 rx_csum_offload;
+ u8 nqsets;
+ u8 first_qset;
+ struct cphy phy;
+ struct cmac mac;
+ struct link_config link_config;
+ struct net_device_stats netstats;
+ int activity;
+};
+
+enum { /* adapter flags */
+ FULL_INIT_DONE = (1 << 0),
+ USING_MSI = (1 << 1),
+ USING_MSIX = (1 << 2),
+ QUEUES_BOUND = (1 << 3),
+};
+
+struct rx_desc;
+struct rx_sw_desc;
+
+struct sge_fl { /* SGE per free-buffer list state */
+ unsigned int buf_size; /* size of each Rx buffer */
+ unsigned int credits; /* # of available Rx buffers */
+ unsigned int size; /* capacity of free list */
+ unsigned int cidx; /* consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned int gen; /* free list generation */
+ struct rx_desc *desc; /* address of HW Rx descriptor ring */
+ struct rx_sw_desc *sdesc; /* address of SW Rx descriptor ring */
+ dma_addr_t phys_addr; /* physical address of HW ring start */
+ unsigned int cntxt_id; /* SGE context id for the free list */
+ unsigned long empty; /* # of times queue ran out of buffers */
+};
+
+/*
+ * Bundle size for grouping offload RX packets for delivery to the stack.
+ * Don't make this too big as we do prefetch on each packet in a bundle.
+ */
+# define RX_BUNDLE_SIZE 8
+
+struct rsp_desc;
+
+struct sge_rspq { /* state for an SGE response queue */
+ unsigned int credits; /* # of pending response credits */
+ unsigned int size; /* capacity of response queue */
+ unsigned int cidx; /* consumer index */
+ unsigned int gen; /* current generation bit */
+ unsigned int polling; /* is the queue serviced through NAPI? */
+ unsigned int holdoff_tmr; /* interrupt holdoff timer in 100ns */
+ unsigned int next_holdoff; /* holdoff time for next interrupt */
+ struct rsp_desc *desc; /* address of HW response ring */
+ dma_addr_t phys_addr; /* physical address of the ring */
+ unsigned int cntxt_id; /* SGE context id for the response q */
+ spinlock_t lock; /* guards response processing */
+ struct sk_buff *rx_head; /* offload packet receive queue head */
+ struct sk_buff *rx_tail; /* offload packet receive queue tail */
+
+ unsigned long offload_pkts;
+ unsigned long offload_bundles;
+ unsigned long eth_pkts; /* # of ethernet packets */
+ unsigned long pure_rsps; /* # of pure (non-data) responses */
+ unsigned long imm_data; /* responses with immediate data */
+ unsigned long rx_drops; /* # of packets dropped due to no mem */
+ unsigned long async_notif; /* # of asynchronous notification events */
+ unsigned long empty; /* # of times queue ran out of credits */
+ unsigned long nomem; /* # of responses deferred due to no mem */
+ unsigned long unhandled_irqs; /* # of spurious intrs */
+};
+
+struct tx_desc;
+struct tx_sw_desc;
+
+struct sge_txq { /* state for an SGE Tx queue */
+ unsigned long flags; /* HW DMA fetch status */
+ unsigned int in_use; /* # of in-use Tx descriptors */
+ unsigned int size; /* # of descriptors */
+ unsigned int processed; /* total # of descs HW has processed */
+ unsigned int cleaned; /* total # of descs SW has reclaimed */
+ unsigned int stop_thres; /* SW TX queue suspend threshold */
+ unsigned int cidx; /* consumer index */
+ unsigned int pidx; /* producer index */
+ unsigned int gen; /* current value of generation bit */
+ unsigned int unacked; /* Tx descriptors used since last COMPL */
+ struct tx_desc *desc; /* address of HW Tx descriptor ring */
+ struct tx_sw_desc *sdesc; /* address of SW Tx descriptor ring */
+ spinlock_t lock; /* guards enqueueing of new packets */
+ unsigned int token; /* WR token */
+ dma_addr_t phys_addr; /* physical address of the ring */
+ struct sk_buff_head sendq; /* List of backpressured offload packets */
+ struct tasklet_struct qresume_tsk; /* restarts the queue */
+ unsigned int cntxt_id; /* SGE context id for the Tx q */
+ unsigned long stops; /* # of times q has been stopped */
+ unsigned long restarts; /* # of queue restarts */
+};
+
+enum { /* per port SGE statistics */
+ SGE_PSTAT_TSO, /* # of TSO requests */
+ SGE_PSTAT_RX_CSUM_GOOD, /* # of successful RX csum offloads */
+ SGE_PSTAT_TX_CSUM, /* # of TX checksum offloads */
+ SGE_PSTAT_VLANEX, /* # of VLAN tag extractions */
+ SGE_PSTAT_VLANINS, /* # of VLAN tag insertions */
+
+ SGE_PSTAT_MAX /* must be last */
+};
+
+struct sge_qset { /* an SGE queue set */
+ struct sge_rspq rspq;
+ struct sge_fl fl[SGE_RXQ_PER_SET];
+ struct sge_txq txq[SGE_TXQ_PER_SET];
+ struct net_device *netdev; /* associated net device */
+ unsigned long txq_stopped; /* which Tx queues are stopped */
+ struct timer_list tx_reclaim_timer; /* reclaims TX buffers */
+ unsigned long port_stats[SGE_PSTAT_MAX];
+} ____cacheline_aligned;
+
+struct sge {
+ struct sge_qset qs[SGE_QSETS];
+ spinlock_t reg_lock; /* guards non-atomic SGE registers (eg context) */
+};
+
+struct adapter {
+ struct t3cdev tdev;
+ struct list_head adapter_list;
+ void __iomem *regs;
+ struct pci_dev *pdev;
+ unsigned long registered_device_map;
+ unsigned long open_device_map;
+ unsigned long flags;
+
+ const char *name;
+ int msg_enable;
+ unsigned int mmio_len;
+
+ struct adapter_params params;
+ unsigned int slow_intr_mask;
+ unsigned long irq_stats[IRQ_NUM_STATS];
+
+ struct {
+ unsigned short vec;
+ char desc[22];
+ } msix_info[SGE_QSETS + 1];
+
+ /* T3 modules */
+ struct sge sge;
+ struct mc7 pmrx;
+ struct mc7 pmtx;
+ struct mc7 cm;
+ struct mc5 mc5;
+
+ struct net_device *port[MAX_NPORTS];
+ unsigned int check_task_cnt;
+ struct delayed_work adap_check_task;
+ struct work_struct ext_intr_handler_task;
+
+ /*
+ * Dummy netdevices are needed when using multiple receive queues with
+ * NAPI as each netdevice can service only one queue.
+ */
+ struct net_device *dummy_netdev[SGE_QSETS - 1];
+
+ struct dentry *debugfs_root;
+
+ struct mutex mdio_lock;
+ spinlock_t stats_lock;
+ spinlock_t work_lock;
+};
+
+static inline u32 t3_read_reg(struct adapter *adapter, u32 reg_addr)
+{
+ u32 val = readl(adapter->regs + reg_addr);
+
+ CH_DBG(adapter, MMIO, "read register 0x%x value 0x%x\n", reg_addr, val);
+ return val;
+}
+
+static inline void t3_write_reg(struct adapter *adapter, u32 reg_addr, u32 val)
+{
+ CH_DBG(adapter, MMIO, "setting register 0x%x to 0x%x\n", reg_addr, val);
+ writel(val, adapter->regs + reg_addr);
+}
+
+static inline struct port_info *adap2pinfo(struct adapter *adap, int idx)
+{
+ return netdev_priv(adap->port[idx]);
+}
+
+/*
+ * We use the spare atalk_ptr to map a net device to its SGE queue set.
+ * This is a macro so it can be used as l-value.
+ */
+#define dev2qset(netdev) ((netdev)->atalk_ptr)
+
+#define OFFLOAD_DEVMAP_BIT 15
+
+#define tdev2adap(d) container_of(d, struct adapter, tdev)
+
+static inline int offload_running(struct adapter *adapter)
+{
+ return test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
+}
+
+int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb);
+
+void t3_os_ext_intr_handler(struct adapter *adapter);
+void t3_os_link_changed(struct adapter *adapter, int port_id, int link_status,
+ int speed, int duplex, int fc);
+
+void t3_sge_start(struct adapter *adap);
+void t3_sge_stop(struct adapter *adap);
+void t3_free_sge_resources(struct adapter *adap);
+void t3_sge_err_intr_handler(struct adapter *adapter);
+intr_handler_t t3_intr_handler(struct adapter *adap, int polling);
+int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev);
+int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb);
+void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p);
+int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
+ int irq_vec_idx, const struct qset_params *p,
+ int ntxq, struct net_device *netdev);
+int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
+ unsigned char *data);
+irqreturn_t t3_sge_intr_msix(int irq, void *cookie);
+
+#endif /* __T3_ADAPTER_H__ */
--- /dev/null
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+enum {
+ AEL100X_TX_DISABLE = 9,
+ AEL100X_TX_CONFIG1 = 0xc002,
+ AEL1002_PWR_DOWN_HI = 0xc011,
+ AEL1002_PWR_DOWN_LO = 0xc012,
+ AEL1002_XFI_EQL = 0xc015,
+ AEL1002_LB_EN = 0xc017,
+
+ LASI_CTRL = 0x9002,
+ LASI_STAT = 0x9005
+};
+
+static void ael100x_txon(struct cphy *phy)
+{
+ int tx_on_gpio = phy->addr == 0 ? F_GPIO7_OUT_VAL : F_GPIO2_OUT_VAL;
+
+ msleep(100);
+ t3_set_reg_field(phy->adapter, A_T3DBG_GPIO_EN, 0, tx_on_gpio);
+ msleep(30);
+}
+
+static int ael1002_power_down(struct cphy *phy, int enable)
+{
+ int err;
+
+ err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_DISABLE, !!enable);
+ if (!err)
+ err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
+ BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+ return err;
+}
+
+static int ael1002_reset(struct cphy *phy, int wait)
+{
+ int err;
+
+ if ((err = ael1002_power_down(phy, 0)) ||
+ (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL100X_TX_CONFIG1, 1)) ||
+ (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_HI, 0)) ||
+ (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_PWR_DOWN_LO, 0)) ||
+ (err = mdio_write(phy, MDIO_DEV_PMA_PMD, AEL1002_XFI_EQL, 0x18)) ||
+ (err = t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, AEL1002_LB_EN,
+ 0, 1 << 5)))
+ return err;
+ return 0;
+}
+
+static int ael1002_intr_noop(struct cphy *phy)
+{
+ return 0;
+}
+
+static int ael100x_get_link_status(struct cphy *phy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ if (link_ok) {
+ unsigned int status;
+ int err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &status);
+
+ /*
+ * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+ * once more to get the current link state.
+ */
+ if (!err && !(status & BMSR_LSTATUS))
+ err = mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR,
+ &status);
+ if (err)
+ return err;
+ *link_ok = !!(status & BMSR_LSTATUS);
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ return 0;
+}
+
+static struct cphy_ops ael1002_ops = {
+ .reset = ael1002_reset,
+ .intr_enable = ael1002_intr_noop,
+ .intr_disable = ael1002_intr_noop,
+ .intr_clear = ael1002_intr_noop,
+ .intr_handler = ael1002_intr_noop,
+ .get_link_status = ael100x_get_link_status,
+ .power_down = ael1002_power_down,
+};
+
+void t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &ael1002_ops, mdio_ops);
+ ael100x_txon(phy);
+}
+
+static int ael1006_reset(struct cphy *phy, int wait)
+{
+ return t3_phy_reset(phy, MDIO_DEV_PMA_PMD, wait);
+}
+
+static int ael1006_intr_enable(struct cphy *phy)
+{
+ return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 1);
+}
+
+static int ael1006_intr_disable(struct cphy *phy)
+{
+ return mdio_write(phy, MDIO_DEV_PMA_PMD, LASI_CTRL, 0);
+}
+
+static int ael1006_intr_clear(struct cphy *phy)
+{
+ u32 val;
+
+ return mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &val);
+}
+
+static int ael1006_intr_handler(struct cphy *phy)
+{
+ unsigned int status;
+ int err = mdio_read(phy, MDIO_DEV_PMA_PMD, LASI_STAT, &status);
+
+ if (err)
+ return err;
+ return (status & 1) ? cphy_cause_link_change : 0;
+}
+
+static int ael1006_power_down(struct cphy *phy, int enable)
+{
+ return t3_mdio_change_bits(phy, MDIO_DEV_PMA_PMD, MII_BMCR,
+ BMCR_PDOWN, enable ? BMCR_PDOWN : 0);
+}
+
+static struct cphy_ops ael1006_ops = {
+ .reset = ael1006_reset,
+ .intr_enable = ael1006_intr_enable,
+ .intr_disable = ael1006_intr_disable,
+ .intr_clear = ael1006_intr_clear,
+ .intr_handler = ael1006_intr_handler,
+ .get_link_status = ael100x_get_link_status,
+ .power_down = ael1006_power_down,
+};
+
+void t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &ael1006_ops, mdio_ops);
+ ael100x_txon(phy);
+}
+
+static struct cphy_ops qt2045_ops = {
+ .reset = ael1006_reset,
+ .intr_enable = ael1006_intr_enable,
+ .intr_disable = ael1006_intr_disable,
+ .intr_clear = ael1006_intr_clear,
+ .intr_handler = ael1006_intr_handler,
+ .get_link_status = ael100x_get_link_status,
+ .power_down = ael1006_power_down,
+};
+
+void t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ unsigned int stat;
+
+ cphy_init(phy, adapter, phy_addr, &qt2045_ops, mdio_ops);
+
+ /*
+ * Some cards where the PHY is supposed to be at address 0 actually
+ * have it at 1.
+ */
+ if (!phy_addr && !mdio_read(phy, MDIO_DEV_PMA_PMD, MII_BMSR, &stat) &&
+ stat == 0xffff)
+ phy->addr = 1;
+}
+
+static int xaui_direct_reset(struct cphy *phy, int wait)
+{
+ return 0;
+}
+
+static int xaui_direct_get_link_status(struct cphy *phy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ if (link_ok) {
+ unsigned int status;
+
+ status = t3_read_reg(phy->adapter,
+ XGM_REG(A_XGM_SERDES_STAT0, phy->addr));
+ *link_ok = !(status & F_LOWSIG0);
+ }
+ if (speed)
+ *speed = SPEED_10000;
+ if (duplex)
+ *duplex = DUPLEX_FULL;
+ return 0;
+}
+
+static int xaui_direct_power_down(struct cphy *phy, int enable)
+{
+ return 0;
+}
+
+static struct cphy_ops xaui_direct_ops = {
+ .reset = xaui_direct_reset,
+ .intr_enable = ael1002_intr_noop,
+ .intr_disable = ael1002_intr_noop,
+ .intr_clear = ael1002_intr_noop,
+ .intr_handler = ael1002_intr_noop,
+ .get_link_status = xaui_direct_get_link_status,
+ .power_down = xaui_direct_power_down,
+};
+
+void t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, 1, &xaui_direct_ops, mdio_ops);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef __CHELSIO_COMMON_H
+#define __CHELSIO_COMMON_H
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/ctype.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/ethtool.h>
+#include <linux/mii.h>
+#include "version.h"
+
+#define CH_ERR(adap, fmt, ...) dev_err(&adap->pdev->dev, fmt, ## __VA_ARGS__)
+#define CH_WARN(adap, fmt, ...) dev_warn(&adap->pdev->dev, fmt, ## __VA_ARGS__)
+#define CH_ALERT(adap, fmt, ...) \
+ dev_printk(KERN_ALERT, &adap->pdev->dev, fmt, ## __VA_ARGS__)
+
+/*
+ * More powerful macro that selectively prints messages based on msg_enable.
+ * For info and debugging messages.
+ */
+#define CH_MSG(adapter, level, category, fmt, ...) do { \
+ if ((adapter)->msg_enable & NETIF_MSG_##category) \
+ dev_printk(KERN_##level, &adapter->pdev->dev, fmt, \
+ ## __VA_ARGS__); \
+} while (0)
+
+#ifdef DEBUG
+# define CH_DBG(adapter, category, fmt, ...) \
+ CH_MSG(adapter, DEBUG, category, fmt, ## __VA_ARGS__)
+#else
+# define CH_DBG(adapter, category, fmt, ...)
+#endif
+
+/* Additional NETIF_MSG_* categories */
+#define NETIF_MSG_MMIO 0x8000000
+
+struct t3_rx_mode {
+ struct net_device *dev;
+ struct dev_mc_list *mclist;
+ unsigned int idx;
+};
+
+static inline void init_rx_mode(struct t3_rx_mode *p, struct net_device *dev,
+ struct dev_mc_list *mclist)
+{
+ p->dev = dev;
+ p->mclist = mclist;
+ p->idx = 0;
+}
+
+static inline u8 *t3_get_next_mcaddr(struct t3_rx_mode *rm)
+{
+ u8 *addr = NULL;
+
+ if (rm->mclist && rm->idx < rm->dev->mc_count) {
+ addr = rm->mclist->dmi_addr;
+ rm->mclist = rm->mclist->next;
+ rm->idx++;
+ }
+ return addr;
+}
+
+enum {
+ MAX_NPORTS = 2, /* max # of ports */
+ MAX_FRAME_SIZE = 10240, /* max MAC frame size, including header + FCS */
+ EEPROMSIZE = 8192, /* Serial EEPROM size */
+ RSS_TABLE_SIZE = 64, /* size of RSS lookup and mapping tables */
+ TCB_SIZE = 128, /* TCB size */
+ NMTUS = 16, /* size of MTU table */
+ NCCTRL_WIN = 32, /* # of congestion control windows */
+};
+
+#define MAX_RX_COALESCING_LEN 16224U
+
+enum {
+ PAUSE_RX = 1 << 0,
+ PAUSE_TX = 1 << 1,
+ PAUSE_AUTONEG = 1 << 2
+};
+
+enum {
+ SUPPORTED_OFFLOAD = 1 << 24,
+ SUPPORTED_IRQ = 1 << 25
+};
+
+enum { /* adapter interrupt-maintained statistics */
+ STAT_ULP_CH0_PBL_OOB,
+ STAT_ULP_CH1_PBL_OOB,
+ STAT_PCI_CORR_ECC,
+
+ IRQ_NUM_STATS /* keep last */
+};
+
+enum {
+ SGE_QSETS = 8, /* # of SGE Tx/Rx/RspQ sets */
+ SGE_RXQ_PER_SET = 2, /* # of Rx queues per set */
+ SGE_TXQ_PER_SET = 3 /* # of Tx queues per set */
+};
+
+enum sge_context_type { /* SGE egress context types */
+ SGE_CNTXT_RDMA = 0,
+ SGE_CNTXT_ETH = 2,
+ SGE_CNTXT_OFLD = 4,
+ SGE_CNTXT_CTRL = 5
+};
+
+enum {
+ AN_PKT_SIZE = 32, /* async notification packet size */
+ IMMED_PKT_SIZE = 48 /* packet size for immediate data */
+};
+
+struct sg_ent { /* SGE scatter/gather entry */
+ u32 len[2];
+ u64 addr[2];
+};
+
+#ifndef SGE_NUM_GENBITS
+/* Must be 1 or 2 */
+# define SGE_NUM_GENBITS 2
+#endif
+
+#define TX_DESC_FLITS 16U
+#define WR_FLITS (TX_DESC_FLITS + 1 - SGE_NUM_GENBITS)
+
+struct cphy;
+struct adapter;
+
+struct mdio_ops {
+ int (*read)(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *val);
+ int (*write)(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val);
+};
+
+struct adapter_info {
+ unsigned char nports; /* # of ports */
+ unsigned char phy_base_addr; /* MDIO PHY base address */
+ unsigned char mdien;
+ unsigned char mdiinv;
+ unsigned int gpio_out; /* GPIO output settings */
+ unsigned int gpio_intr; /* GPIO IRQ enable mask */
+ unsigned long caps; /* adapter capabilities */
+ const struct mdio_ops *mdio_ops; /* MDIO operations */
+ const char *desc; /* product description */
+};
+
+struct port_type_info {
+ void (*phy_prep)(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *ops);
+ unsigned int caps;
+ const char *desc;
+};
+
+struct mc5_stats {
+ unsigned long parity_err;
+ unsigned long active_rgn_full;
+ unsigned long nfa_srch_err;
+ unsigned long unknown_cmd;
+ unsigned long reqq_parity_err;
+ unsigned long dispq_parity_err;
+ unsigned long del_act_empty;
+};
+
+struct mc7_stats {
+ unsigned long corr_err;
+ unsigned long uncorr_err;
+ unsigned long parity_err;
+ unsigned long addr_err;
+};
+
+struct mac_stats {
+ u64 tx_octets; /* total # of octets in good frames */
+ u64 tx_octets_bad; /* total # of octets in error frames */
+ u64 tx_frames; /* all good frames */
+ u64 tx_mcast_frames; /* good multicast frames */
+ u64 tx_bcast_frames; /* good broadcast frames */
+ u64 tx_pause; /* # of transmitted pause frames */
+ u64 tx_deferred; /* frames with deferred transmissions */
+ u64 tx_late_collisions; /* # of late collisions */
+ u64 tx_total_collisions; /* # of total collisions */
+ u64 tx_excess_collisions; /* frame errors from excessive collissions */
+ u64 tx_underrun; /* # of Tx FIFO underruns */
+ u64 tx_len_errs; /* # of Tx length errors */
+ u64 tx_mac_internal_errs; /* # of internal MAC errors on Tx */
+ u64 tx_excess_deferral; /* # of frames with excessive deferral */
+ u64 tx_fcs_errs; /* # of frames with bad FCS */
+
+ u64 tx_frames_64; /* # of Tx frames in a particular range */
+ u64 tx_frames_65_127;
+ u64 tx_frames_128_255;
+ u64 tx_frames_256_511;
+ u64 tx_frames_512_1023;
+ u64 tx_frames_1024_1518;
+ u64 tx_frames_1519_max;
+
+ u64 rx_octets; /* total # of octets in good frames */
+ u64 rx_octets_bad; /* total # of octets in error frames */
+ u64 rx_frames; /* all good frames */
+ u64 rx_mcast_frames; /* good multicast frames */
+ u64 rx_bcast_frames; /* good broadcast frames */
+ u64 rx_pause; /* # of received pause frames */
+ u64 rx_fcs_errs; /* # of received frames with bad FCS */
+ u64 rx_align_errs; /* alignment errors */
+ u64 rx_symbol_errs; /* symbol errors */
+ u64 rx_data_errs; /* data errors */
+ u64 rx_sequence_errs; /* sequence errors */
+ u64 rx_runt; /* # of runt frames */
+ u64 rx_jabber; /* # of jabber frames */
+ u64 rx_short; /* # of short frames */
+ u64 rx_too_long; /* # of oversized frames */
+ u64 rx_mac_internal_errs; /* # of internal MAC errors on Rx */
+
+ u64 rx_frames_64; /* # of Rx frames in a particular range */
+ u64 rx_frames_65_127;
+ u64 rx_frames_128_255;
+ u64 rx_frames_256_511;
+ u64 rx_frames_512_1023;
+ u64 rx_frames_1024_1518;
+ u64 rx_frames_1519_max;
+
+ u64 rx_cong_drops; /* # of Rx drops due to SGE congestion */
+
+ unsigned long tx_fifo_parity_err;
+ unsigned long rx_fifo_parity_err;
+ unsigned long tx_fifo_urun;
+ unsigned long rx_fifo_ovfl;
+ unsigned long serdes_signal_loss;
+ unsigned long xaui_pcs_ctc_err;
+ unsigned long xaui_pcs_align_change;
+};
+
+struct tp_mib_stats {
+ u32 ipInReceive_hi;
+ u32 ipInReceive_lo;
+ u32 ipInHdrErrors_hi;
+ u32 ipInHdrErrors_lo;
+ u32 ipInAddrErrors_hi;
+ u32 ipInAddrErrors_lo;
+ u32 ipInUnknownProtos_hi;
+ u32 ipInUnknownProtos_lo;
+ u32 ipInDiscards_hi;
+ u32 ipInDiscards_lo;
+ u32 ipInDelivers_hi;
+ u32 ipInDelivers_lo;
+ u32 ipOutRequests_hi;
+ u32 ipOutRequests_lo;
+ u32 ipOutDiscards_hi;
+ u32 ipOutDiscards_lo;
+ u32 ipOutNoRoutes_hi;
+ u32 ipOutNoRoutes_lo;
+ u32 ipReasmTimeout;
+ u32 ipReasmReqds;
+ u32 ipReasmOKs;
+ u32 ipReasmFails;
+
+ u32 reserved[8];
+
+ u32 tcpActiveOpens;
+ u32 tcpPassiveOpens;
+ u32 tcpAttemptFails;
+ u32 tcpEstabResets;
+ u32 tcpOutRsts;
+ u32 tcpCurrEstab;
+ u32 tcpInSegs_hi;
+ u32 tcpInSegs_lo;
+ u32 tcpOutSegs_hi;
+ u32 tcpOutSegs_lo;
+ u32 tcpRetransSeg_hi;
+ u32 tcpRetransSeg_lo;
+ u32 tcpInErrs_hi;
+ u32 tcpInErrs_lo;
+ u32 tcpRtoMin;
+ u32 tcpRtoMax;
+};
+
+struct tp_params {
+ unsigned int nchan; /* # of channels */
+ unsigned int pmrx_size; /* total PMRX capacity */
+ unsigned int pmtx_size; /* total PMTX capacity */
+ unsigned int cm_size; /* total CM capacity */
+ unsigned int chan_rx_size; /* per channel Rx size */
+ unsigned int chan_tx_size; /* per channel Tx size */
+ unsigned int rx_pg_size; /* Rx page size */
+ unsigned int tx_pg_size; /* Tx page size */
+ unsigned int rx_num_pgs; /* # of Rx pages */
+ unsigned int tx_num_pgs; /* # of Tx pages */
+ unsigned int ntimer_qs; /* # of timer queues */
+};
+
+struct qset_params { /* SGE queue set parameters */
+ unsigned int polling; /* polling/interrupt service for rspq */
+ unsigned int coalesce_usecs; /* irq coalescing timer */
+ unsigned int rspq_size; /* # of entries in response queue */
+ unsigned int fl_size; /* # of entries in regular free list */
+ unsigned int jumbo_size; /* # of entries in jumbo free list */
+ unsigned int txq_size[SGE_TXQ_PER_SET]; /* Tx queue sizes */
+ unsigned int cong_thres; /* FL congestion threshold */
+};
+
+struct sge_params {
+ unsigned int max_pkt_size; /* max offload pkt size */
+ struct qset_params qset[SGE_QSETS];
+};
+
+struct mc5_params {
+ unsigned int mode; /* selects MC5 width */
+ unsigned int nservers; /* size of server region */
+ unsigned int nfilters; /* size of filter region */
+ unsigned int nroutes; /* size of routing region */
+};
+
+/* Default MC5 region sizes */
+enum {
+ DEFAULT_NSERVERS = 512,
+ DEFAULT_NFILTERS = 128
+};
+
+/* MC5 modes, these must be non-0 */
+enum {
+ MC5_MODE_144_BIT = 1,
+ MC5_MODE_72_BIT = 2
+};
+
+struct vpd_params {
+ unsigned int cclk;
+ unsigned int mclk;
+ unsigned int uclk;
+ unsigned int mdc;
+ unsigned int mem_timing;
+ u8 eth_base[6];
+ u8 port_type[MAX_NPORTS];
+ unsigned short xauicfg[2];
+};
+
+struct pci_params {
+ unsigned int vpd_cap_addr;
+ unsigned int pcie_cap_addr;
+ unsigned short speed;
+ unsigned char width;
+ unsigned char variant;
+};
+
+enum {
+ PCI_VARIANT_PCI,
+ PCI_VARIANT_PCIX_MODE1_PARITY,
+ PCI_VARIANT_PCIX_MODE1_ECC,
+ PCI_VARIANT_PCIX_266_MODE2,
+ PCI_VARIANT_PCIE
+};
+
+struct adapter_params {
+ struct sge_params sge;
+ struct mc5_params mc5;
+ struct tp_params tp;
+ struct vpd_params vpd;
+ struct pci_params pci;
+
+ const struct adapter_info *info;
+
+ unsigned short mtus[NMTUS];
+ unsigned short a_wnd[NCCTRL_WIN];
+ unsigned short b_wnd[NCCTRL_WIN];
+
+ unsigned int nports; /* # of ethernet ports */
+ unsigned int stats_update_period; /* MAC stats accumulation period */
+ unsigned int linkpoll_period; /* link poll period in 0.1s */
+ unsigned int rev; /* chip revision */
+};
+
+struct trace_params {
+ u32 sip;
+ u32 sip_mask;
+ u32 dip;
+ u32 dip_mask;
+ u16 sport;
+ u16 sport_mask;
+ u16 dport;
+ u16 dport_mask;
+ u32 vlan:12;
+ u32 vlan_mask:12;
+ u32 intf:4;
+ u32 intf_mask:4;
+ u8 proto;
+ u8 proto_mask;
+};
+
+struct link_config {
+ unsigned int supported; /* link capabilities */
+ unsigned int advertising; /* advertised capabilities */
+ unsigned short requested_speed; /* speed user has requested */
+ unsigned short speed; /* actual link speed */
+ unsigned char requested_duplex; /* duplex user has requested */
+ unsigned char duplex; /* actual link duplex */
+ unsigned char requested_fc; /* flow control user has requested */
+ unsigned char fc; /* actual link flow control */
+ unsigned char autoneg; /* autonegotiating? */
+ unsigned int link_ok; /* link up? */
+};
+
+#define SPEED_INVALID 0xffff
+#define DUPLEX_INVALID 0xff
+
+struct mc5 {
+ struct adapter *adapter;
+ unsigned int tcam_size;
+ unsigned char part_type;
+ unsigned char parity_enabled;
+ unsigned char mode;
+ struct mc5_stats stats;
+};
+
+static inline unsigned int t3_mc5_size(const struct mc5 *p)
+{
+ return p->tcam_size;
+}
+
+struct mc7 {
+ struct adapter *adapter; /* backpointer to adapter */
+ unsigned int size; /* memory size in bytes */
+ unsigned int width; /* MC7 interface width */
+ unsigned int offset; /* register address offset for MC7 instance */
+ const char *name; /* name of MC7 instance */
+ struct mc7_stats stats; /* MC7 statistics */
+};
+
+static inline unsigned int t3_mc7_size(const struct mc7 *p)
+{
+ return p->size;
+}
+
+struct cmac {
+ struct adapter *adapter;
+ unsigned int offset;
+ unsigned int nucast; /* # of address filters for unicast MACs */
+ struct mac_stats stats;
+};
+
+enum {
+ MAC_DIRECTION_RX = 1,
+ MAC_DIRECTION_TX = 2,
+ MAC_RXFIFO_SIZE = 32768
+};
+
+/* IEEE 802.3ae specified MDIO devices */
+enum {
+ MDIO_DEV_PMA_PMD = 1,
+ MDIO_DEV_WIS = 2,
+ MDIO_DEV_PCS = 3,
+ MDIO_DEV_XGXS = 4
+};
+
+/* PHY loopback direction */
+enum {
+ PHY_LOOPBACK_TX = 1,
+ PHY_LOOPBACK_RX = 2
+};
+
+/* PHY interrupt types */
+enum {
+ cphy_cause_link_change = 1,
+ cphy_cause_fifo_error = 2
+};
+
+/* PHY operations */
+struct cphy_ops {
+ void (*destroy)(struct cphy *phy);
+ int (*reset)(struct cphy *phy, int wait);
+
+ int (*intr_enable)(struct cphy *phy);
+ int (*intr_disable)(struct cphy *phy);
+ int (*intr_clear)(struct cphy *phy);
+ int (*intr_handler)(struct cphy *phy);
+
+ int (*autoneg_enable)(struct cphy *phy);
+ int (*autoneg_restart)(struct cphy *phy);
+
+ int (*advertise)(struct cphy *phy, unsigned int advertise_map);
+ int (*set_loopback)(struct cphy *phy, int mmd, int dir, int enable);
+ int (*set_speed_duplex)(struct cphy *phy, int speed, int duplex);
+ int (*get_link_status)(struct cphy *phy, int *link_ok, int *speed,
+ int *duplex, int *fc);
+ int (*power_down)(struct cphy *phy, int enable);
+};
+
+/* A PHY instance */
+struct cphy {
+ int addr; /* PHY address */
+ struct adapter *adapter; /* associated adapter */
+ unsigned long fifo_errors; /* FIFO over/under-flows */
+ const struct cphy_ops *ops; /* PHY operations */
+ int (*mdio_read)(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *val);
+ int (*mdio_write)(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val);
+};
+
+/* Convenience MDIO read/write wrappers */
+static inline int mdio_read(struct cphy *phy, int mmd, int reg,
+ unsigned int *valp)
+{
+ return phy->mdio_read(phy->adapter, phy->addr, mmd, reg, valp);
+}
+
+static inline int mdio_write(struct cphy *phy, int mmd, int reg,
+ unsigned int val)
+{
+ return phy->mdio_write(phy->adapter, phy->addr, mmd, reg, val);
+}
+
+/* Convenience initializer */
+static inline void cphy_init(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, struct cphy_ops *phy_ops,
+ const struct mdio_ops *mdio_ops)
+{
+ phy->adapter = adapter;
+ phy->addr = phy_addr;
+ phy->ops = phy_ops;
+ if (mdio_ops) {
+ phy->mdio_read = mdio_ops->read;
+ phy->mdio_write = mdio_ops->write;
+ }
+}
+
+/* Accumulate MAC statistics every 180 seconds. For 1G we multiply by 10. */
+#define MAC_STATS_ACCUM_SECS 180
+
+#define XGM_REG(reg_addr, idx) \
+ ((reg_addr) + (idx) * (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR))
+
+struct addr_val_pair {
+ unsigned int reg_addr;
+ unsigned int val;
+};
+
+#include "adapter.h"
+
+#ifndef PCI_VENDOR_ID_CHELSIO
+# define PCI_VENDOR_ID_CHELSIO 0x1425
+#endif
+
+#define for_each_port(adapter, iter) \
+ for (iter = 0; iter < (adapter)->params.nports; ++iter)
+
+#define adapter_info(adap) ((adap)->params.info)
+
+static inline int uses_xaui(const struct adapter *adap)
+{
+ return adapter_info(adap)->caps & SUPPORTED_AUI;
+}
+
+static inline int is_10G(const struct adapter *adap)
+{
+ return adapter_info(adap)->caps & SUPPORTED_10000baseT_Full;
+}
+
+static inline int is_offload(const struct adapter *adap)
+{
+ return adapter_info(adap)->caps & SUPPORTED_OFFLOAD;
+}
+
+static inline unsigned int core_ticks_per_usec(const struct adapter *adap)
+{
+ return adap->params.vpd.cclk / 1000;
+}
+
+static inline unsigned int is_pcie(const struct adapter *adap)
+{
+ return adap->params.pci.variant == PCI_VARIANT_PCIE;
+}
+
+void t3_set_reg_field(struct adapter *adap, unsigned int addr, u32 mask,
+ u32 val);
+void t3_write_regs(struct adapter *adapter, const struct addr_val_pair *p,
+ int n, unsigned int offset);
+int t3_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay, u32 *valp);
+static inline int t3_wait_op_done(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay)
+{
+ return t3_wait_op_done_val(adapter, reg, mask, polarity, attempts,
+ delay, NULL);
+}
+int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
+ unsigned int set);
+int t3_phy_reset(struct cphy *phy, int mmd, int wait);
+int t3_phy_advertise(struct cphy *phy, unsigned int advert);
+int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex);
+
+void t3_intr_enable(struct adapter *adapter);
+void t3_intr_disable(struct adapter *adapter);
+void t3_intr_clear(struct adapter *adapter);
+void t3_port_intr_enable(struct adapter *adapter, int idx);
+void t3_port_intr_disable(struct adapter *adapter, int idx);
+void t3_port_intr_clear(struct adapter *adapter, int idx);
+int t3_slow_intr_handler(struct adapter *adapter);
+int t3_phy_intr_handler(struct adapter *adapter);
+
+void t3_link_changed(struct adapter *adapter, int port_id);
+int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc);
+const struct adapter_info *t3_get_adapter_info(unsigned int board_id);
+int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data);
+int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data);
+int t3_seeprom_wp(struct adapter *adapter, int enable);
+int t3_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented);
+int t3_load_fw(struct adapter *adapter, const u8 * fw_data, unsigned int size);
+int t3_get_fw_version(struct adapter *adapter, u32 *vers);
+int t3_check_fw_version(struct adapter *adapter);
+int t3_init_hw(struct adapter *adapter, u32 fw_params);
+void mac_prep(struct cmac *mac, struct adapter *adapter, int index);
+void early_hw_init(struct adapter *adapter, const struct adapter_info *ai);
+int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
+ int reset);
+void t3_led_ready(struct adapter *adapter);
+void t3_fatal_err(struct adapter *adapter);
+void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on);
+void t3_config_rss(struct adapter *adapter, unsigned int rss_config,
+ const u8 * cpus, const u16 *rspq);
+int t3_read_rss(struct adapter *adapter, u8 * lkup, u16 *map);
+int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask);
+int t3_cim_ctl_blk_read(struct adapter *adap, unsigned int addr,
+ unsigned int n, unsigned int *valp);
+int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n,
+ u64 *buf);
+
+int t3_mac_reset(struct cmac *mac);
+void t3b_pcs_reset(struct cmac *mac);
+int t3_mac_enable(struct cmac *mac, int which);
+int t3_mac_disable(struct cmac *mac, int which);
+int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu);
+int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm);
+int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6]);
+int t3_mac_set_num_ucast(struct cmac *mac, int n);
+const struct mac_stats *t3_mac_update_stats(struct cmac *mac);
+int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc);
+
+void t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode);
+int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
+ unsigned int nroutes);
+void t3_mc5_intr_handler(struct mc5 *mc5);
+int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start, unsigned int n,
+ u32 *buf);
+
+int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh);
+void t3_tp_set_max_rxsize(struct adapter *adap, unsigned int size);
+void t3_tp_set_offload_mode(struct adapter *adap, int enable);
+void t3_tp_get_mib_stats(struct adapter *adap, struct tp_mib_stats *tps);
+void t3_load_mtus(struct adapter *adap, unsigned short mtus[NMTUS],
+ unsigned short alpha[NCCTRL_WIN],
+ unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap);
+void t3_read_hw_mtus(struct adapter *adap, unsigned short mtus[NMTUS]);
+void t3_get_cong_cntl_tab(struct adapter *adap,
+ unsigned short incr[NMTUS][NCCTRL_WIN]);
+void t3_config_trace_filter(struct adapter *adapter,
+ const struct trace_params *tp, int filter_index,
+ int invert, int enable);
+int t3_config_sched(struct adapter *adap, unsigned int kbps, int sched);
+
+void t3_sge_prep(struct adapter *adap, struct sge_params *p);
+void t3_sge_init(struct adapter *adap, struct sge_params *p);
+int t3_sge_init_ecntxt(struct adapter *adapter, unsigned int id, int gts_enable,
+ enum sge_context_type type, int respq, u64 base_addr,
+ unsigned int size, unsigned int token, int gen,
+ unsigned int cidx);
+int t3_sge_init_flcntxt(struct adapter *adapter, unsigned int id,
+ int gts_enable, u64 base_addr, unsigned int size,
+ unsigned int esize, unsigned int cong_thres, int gen,
+ unsigned int cidx);
+int t3_sge_init_rspcntxt(struct adapter *adapter, unsigned int id,
+ int irq_vec_idx, u64 base_addr, unsigned int size,
+ unsigned int fl_thres, int gen, unsigned int cidx);
+int t3_sge_init_cqcntxt(struct adapter *adapter, unsigned int id, u64 base_addr,
+ unsigned int size, int rspq, int ovfl_mode,
+ unsigned int credits, unsigned int credit_thres);
+int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable);
+int t3_sge_disable_fl(struct adapter *adapter, unsigned int id);
+int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id);
+int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id);
+int t3_sge_read_ecntxt(struct adapter *adapter, unsigned int id, u32 data[4]);
+int t3_sge_read_fl(struct adapter *adapter, unsigned int id, u32 data[4]);
+int t3_sge_read_cq(struct adapter *adapter, unsigned int id, u32 data[4]);
+int t3_sge_read_rspq(struct adapter *adapter, unsigned int id, u32 data[4]);
+int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op,
+ unsigned int credits);
+
+void t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops);
+void t3_ael1002_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops);
+void t3_ael1006_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops);
+void t3_qt2045_phy_prep(struct cphy *phy, struct adapter *adapter, int phy_addr,
+ const struct mdio_ops *mdio_ops);
+void t3_xaui_direct_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops);
+#endif /* __CHELSIO_COMMON_H */
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CXGB3_OFFLOAD_CTL_DEFS_H
+#define _CXGB3_OFFLOAD_CTL_DEFS_H
+
+enum {
+ GET_MAX_OUTSTANDING_WR,
+ GET_TX_MAX_CHUNK,
+ GET_TID_RANGE,
+ GET_STID_RANGE,
+ GET_RTBL_RANGE,
+ GET_L2T_CAPACITY,
+ GET_MTUS,
+ GET_WR_LEN,
+ GET_IFF_FROM_MAC,
+ GET_DDP_PARAMS,
+ GET_PORTS,
+
+ ULP_ISCSI_GET_PARAMS,
+ ULP_ISCSI_SET_PARAMS,
+
+ RDMA_GET_PARAMS,
+ RDMA_CQ_OP,
+ RDMA_CQ_SETUP,
+ RDMA_CQ_DISABLE,
+ RDMA_CTRL_QP_SETUP,
+ RDMA_GET_MEM,
+};
+
+/*
+ * Structure used to describe a TID range. Valid TIDs are [base, base+num).
+ */
+struct tid_range {
+ unsigned int base; /* first TID */
+ unsigned int num; /* number of TIDs in range */
+};
+
+/*
+ * Structure used to request the size and contents of the MTU table.
+ */
+struct mtutab {
+ unsigned int size; /* # of entries in the MTU table */
+ const unsigned short *mtus; /* the MTU table values */
+};
+
+struct net_device;
+
+/*
+ * Structure used to request the adapter net_device owning a given MAC address.
+ */
+struct iff_mac {
+ struct net_device *dev; /* the net_device */
+ const unsigned char *mac_addr; /* MAC address to lookup */
+ u16 vlan_tag;
+};
+
+struct pci_dev;
+
+/*
+ * Structure used to request the TCP DDP parameters.
+ */
+struct ddp_params {
+ unsigned int llimit; /* TDDP region start address */
+ unsigned int ulimit; /* TDDP region end address */
+ unsigned int tag_mask; /* TDDP tag mask */
+ struct pci_dev *pdev;
+};
+
+struct adap_ports {
+ unsigned int nports; /* number of ports on this adapter */
+ struct net_device *lldevs[2];
+};
+
+/*
+ * Structure used to return information to the iscsi layer.
+ */
+struct ulp_iscsi_info {
+ unsigned int offset;
+ unsigned int llimit;
+ unsigned int ulimit;
+ unsigned int tagmask;
+ unsigned int pgsz3;
+ unsigned int pgsz2;
+ unsigned int pgsz1;
+ unsigned int pgsz0;
+ unsigned int max_rxsz;
+ unsigned int max_txsz;
+ struct pci_dev *pdev;
+};
+
+/*
+ * Structure used to return information to the RDMA layer.
+ */
+struct rdma_info {
+ unsigned int tpt_base; /* TPT base address */
+ unsigned int tpt_top; /* TPT last entry address */
+ unsigned int pbl_base; /* PBL base address */
+ unsigned int pbl_top; /* PBL last entry address */
+ unsigned int rqt_base; /* RQT base address */
+ unsigned int rqt_top; /* RQT last entry address */
+ unsigned int udbell_len; /* user doorbell region length */
+ unsigned long udbell_physbase; /* user doorbell physical start addr */
+ void __iomem *kdb_addr; /* kernel doorbell register address */
+ struct pci_dev *pdev; /* associated PCI device */
+};
+
+/*
+ * Structure used to request an operation on an RDMA completion queue.
+ */
+struct rdma_cq_op {
+ unsigned int id;
+ unsigned int op;
+ unsigned int credits;
+};
+
+/*
+ * Structure used to setup RDMA completion queues.
+ */
+struct rdma_cq_setup {
+ unsigned int id;
+ unsigned long long base_addr;
+ unsigned int size;
+ unsigned int credits;
+ unsigned int credit_thres;
+ unsigned int ovfl_mode;
+};
+
+/*
+ * Structure used to setup the RDMA control egress context.
+ */
+struct rdma_ctrlqp_setup {
+ unsigned long long base_addr;
+ unsigned int size;
+};
+#endif /* _CXGB3_OFFLOAD_CTL_DEFS_H */
--- /dev/null
+/*
+ * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CHELSIO_DEFS_H
+#define _CHELSIO_DEFS_H
+
+#include <linux/skbuff.h>
+#include <net/tcp.h>
+
+#include "t3cdev.h"
+
+#include "cxgb3_offload.h"
+
+#define VALIDATE_TID 1
+
+void *cxgb_alloc_mem(unsigned long size);
+void cxgb_free_mem(void *addr);
+void cxgb_neigh_update(struct neighbour *neigh);
+void cxgb_redirect(struct dst_entry *old, struct dst_entry *new);
+
+/*
+ * Map an ATID or STID to their entries in the corresponding TID tables.
+ */
+static inline union active_open_entry *atid2entry(const struct tid_info *t,
+ unsigned int atid)
+{
+ return &t->atid_tab[atid - t->atid_base];
+}
+
+static inline union listen_entry *stid2entry(const struct tid_info *t,
+ unsigned int stid)
+{
+ return &t->stid_tab[stid - t->stid_base];
+}
+
+/*
+ * Find the connection corresponding to a TID.
+ */
+static inline struct t3c_tid_entry *lookup_tid(const struct tid_info *t,
+ unsigned int tid)
+{
+ return tid < t->ntids ? &(t->tid_tab[tid]) : NULL;
+}
+
+/*
+ * Find the connection corresponding to a server TID.
+ */
+static inline struct t3c_tid_entry *lookup_stid(const struct tid_info *t,
+ unsigned int tid)
+{
+ if (tid < t->stid_base || tid >= t->stid_base + t->nstids)
+ return NULL;
+ return &(stid2entry(t, tid)->t3c_tid);
+}
+
+/*
+ * Find the connection corresponding to an active-open TID.
+ */
+static inline struct t3c_tid_entry *lookup_atid(const struct tid_info *t,
+ unsigned int tid)
+{
+ if (tid < t->atid_base || tid >= t->atid_base + t->natids)
+ return NULL;
+ return &(atid2entry(t, tid)->t3c_tid);
+}
+
+int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n);
+int attach_t3cdev(struct t3cdev *dev);
+void detach_t3cdev(struct t3cdev *dev);
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef __CHIOCTL_H__
+#define __CHIOCTL_H__
+
+/*
+ * Ioctl commands specific to this driver.
+ */
+enum {
+ CHELSIO_SETREG = 1024,
+ CHELSIO_GETREG,
+ CHELSIO_SETTPI,
+ CHELSIO_GETTPI,
+ CHELSIO_GETMTUTAB,
+ CHELSIO_SETMTUTAB,
+ CHELSIO_GETMTU,
+ CHELSIO_SET_PM,
+ CHELSIO_GET_PM,
+ CHELSIO_GET_TCAM,
+ CHELSIO_SET_TCAM,
+ CHELSIO_GET_TCB,
+ CHELSIO_GET_MEM,
+ CHELSIO_LOAD_FW,
+ CHELSIO_GET_PROTO,
+ CHELSIO_SET_PROTO,
+ CHELSIO_SET_TRACE_FILTER,
+ CHELSIO_SET_QSET_PARAMS,
+ CHELSIO_GET_QSET_PARAMS,
+ CHELSIO_SET_QSET_NUM,
+ CHELSIO_GET_QSET_NUM,
+ CHELSIO_SET_PKTSCHED,
+};
+
+struct ch_reg {
+ uint32_t cmd;
+ uint32_t addr;
+ uint32_t val;
+};
+
+struct ch_cntxt {
+ uint32_t cmd;
+ uint32_t cntxt_type;
+ uint32_t cntxt_id;
+ uint32_t data[4];
+};
+
+/* context types */
+enum { CNTXT_TYPE_EGRESS, CNTXT_TYPE_FL, CNTXT_TYPE_RSP, CNTXT_TYPE_CQ };
+
+struct ch_desc {
+ uint32_t cmd;
+ uint32_t queue_num;
+ uint32_t idx;
+ uint32_t size;
+ uint8_t data[128];
+};
+
+struct ch_mem_range {
+ uint32_t cmd;
+ uint32_t mem_id;
+ uint32_t addr;
+ uint32_t len;
+ uint32_t version;
+ uint8_t buf[0];
+};
+
+struct ch_qset_params {
+ uint32_t cmd;
+ uint32_t qset_idx;
+ int32_t txq_size[3];
+ int32_t rspq_size;
+ int32_t fl_size[2];
+ int32_t intr_lat;
+ int32_t polling;
+ int32_t cong_thres;
+};
+
+struct ch_pktsched_params {
+ uint32_t cmd;
+ uint8_t sched;
+ uint8_t idx;
+ uint8_t min;
+ uint8_t max;
+ uint8_t binding;
+};
+
+#ifndef TCB_SIZE
+# define TCB_SIZE 128
+#endif
+
+/* TCB size in 32-bit words */
+#define TCB_WORDS (TCB_SIZE / 4)
+
+enum { MEM_CM, MEM_PMRX, MEM_PMTX }; /* ch_mem_range.mem_id values */
+
+struct ch_mtus {
+ uint32_t cmd;
+ uint32_t nmtus;
+ uint16_t mtus[NMTUS];
+};
+
+struct ch_pm {
+ uint32_t cmd;
+ uint32_t tx_pg_sz;
+ uint32_t tx_num_pg;
+ uint32_t rx_pg_sz;
+ uint32_t rx_num_pg;
+ uint32_t pm_total;
+};
+
+struct ch_tcam {
+ uint32_t cmd;
+ uint32_t tcam_size;
+ uint32_t nservers;
+ uint32_t nroutes;
+ uint32_t nfilters;
+};
+
+struct ch_tcb {
+ uint32_t cmd;
+ uint32_t tcb_index;
+ uint32_t tcb_data[TCB_WORDS];
+};
+
+struct ch_tcam_word {
+ uint32_t cmd;
+ uint32_t addr;
+ uint32_t buf[3];
+};
+
+struct ch_trace {
+ uint32_t cmd;
+ uint32_t sip;
+ uint32_t sip_mask;
+ uint32_t dip;
+ uint32_t dip_mask;
+ uint16_t sport;
+ uint16_t sport_mask;
+ uint16_t dport;
+ uint16_t dport_mask;
+ uint32_t vlan:12;
+ uint32_t vlan_mask:12;
+ uint32_t intf:4;
+ uint32_t intf_mask:4;
+ uint8_t proto;
+ uint8_t proto_mask;
+ uint8_t invert_match:1;
+ uint8_t config_tx:1;
+ uint8_t config_rx:1;
+ uint8_t trace_tx:1;
+ uint8_t trace_rx:1;
+};
+
+#define SIOCCHIOCTL SIOCDEVPRIVATE
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/mii.h>
+#include <linux/sockios.h>
+#include <linux/workqueue.h>
+#include <linux/proc_fs.h>
+#include <linux/rtnetlink.h>
+#include <asm/uaccess.h>
+
+#include "common.h"
+#include "cxgb3_ioctl.h"
+#include "regs.h"
+#include "cxgb3_offload.h"
+#include "version.h"
+
+#include "cxgb3_ctl_defs.h"
+#include "t3_cpl.h"
+#include "firmware_exports.h"
+
+enum {
+ MAX_TXQ_ENTRIES = 16384,
+ MAX_CTRL_TXQ_ENTRIES = 1024,
+ MAX_RSPQ_ENTRIES = 16384,
+ MAX_RX_BUFFERS = 16384,
+ MAX_RX_JUMBO_BUFFERS = 16384,
+ MIN_TXQ_ENTRIES = 4,
+ MIN_CTRL_TXQ_ENTRIES = 4,
+ MIN_RSPQ_ENTRIES = 32,
+ MIN_FL_ENTRIES = 32
+};
+
+#define PORT_MASK ((1 << MAX_NPORTS) - 1)
+
+#define DFLT_MSG_ENABLE (NETIF_MSG_DRV | NETIF_MSG_PROBE | NETIF_MSG_LINK | \
+ NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP |\
+ NETIF_MSG_RX_ERR | NETIF_MSG_TX_ERR)
+
+#define EEPROM_MAGIC 0x38E2F10C
+
+#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+
+#define CH_DEVICE(devid, ssid, idx) \
+ { PCI_VENDOR_ID_CHELSIO, devid, PCI_ANY_ID, ssid, 0, 0, idx }
+
+static const struct pci_device_id cxgb3_pci_tbl[] = {
+ CH_DEVICE(0x20, 1, 0), /* PE9000 */
+ CH_DEVICE(0x21, 1, 1), /* T302E */
+ CH_DEVICE(0x22, 1, 2), /* T310E */
+ CH_DEVICE(0x23, 1, 3), /* T320X */
+ CH_DEVICE(0x24, 1, 1), /* T302X */
+ CH_DEVICE(0x25, 1, 3), /* T320E */
+ CH_DEVICE(0x26, 1, 2), /* T310X */
+ CH_DEVICE(0x30, 1, 2), /* T3B10 */
+ CH_DEVICE(0x31, 1, 3), /* T3B20 */
+ CH_DEVICE(0x32, 1, 1), /* T3B02 */
+ {0,}
+};
+
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_AUTHOR("Chelsio Communications");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, cxgb3_pci_tbl);
+
+static int dflt_msg_enable = DFLT_MSG_ENABLE;
+
+module_param(dflt_msg_enable, int, 0644);
+MODULE_PARM_DESC(dflt_msg_enable, "Chelsio T3 default message enable bitmap");
+
+/*
+ * The driver uses the best interrupt scheme available on a platform in the
+ * order MSI-X, MSI, legacy pin interrupts. This parameter determines which
+ * of these schemes the driver may consider as follows:
+ *
+ * msi = 2: choose from among all three options
+ * msi = 1: only consider MSI and pin interrupts
+ * msi = 0: force pin interrupts
+ */
+static int msi = 2;
+
+module_param(msi, int, 0644);
+MODULE_PARM_DESC(msi, "whether to use MSI or MSI-X");
+
+/*
+ * The driver enables offload as a default.
+ * To disable it, use ofld_disable = 1.
+ */
+
+static int ofld_disable = 0;
+
+module_param(ofld_disable, int, 0644);
+MODULE_PARM_DESC(ofld_disable, "whether to enable offload at init time or not");
+
+/*
+ * We have work elements that we need to cancel when an interface is taken
+ * down. Normally the work elements would be executed by keventd but that
+ * can deadlock because of linkwatch. If our close method takes the rtnl
+ * lock and linkwatch is ahead of our work elements in keventd, linkwatch
+ * will block keventd as it needs the rtnl lock, and we'll deadlock waiting
+ * for our work to complete. Get our own work queue to solve this.
+ */
+static struct workqueue_struct *cxgb3_wq;
+
+/**
+ * link_report - show link status and link speed/duplex
+ * @p: the port whose settings are to be reported
+ *
+ * Shows the link status, speed, and duplex of a port.
+ */
+static void link_report(struct net_device *dev)
+{
+ if (!netif_carrier_ok(dev))
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ else {
+ const char *s = "10Mbps";
+ const struct port_info *p = netdev_priv(dev);
+
+ switch (p->link_config.speed) {
+ case SPEED_10000:
+ s = "10Gbps";
+ break;
+ case SPEED_1000:
+ s = "1000Mbps";
+ break;
+ case SPEED_100:
+ s = "100Mbps";
+ break;
+ }
+
+ printk(KERN_INFO "%s: link up, %s, %s-duplex\n", dev->name, s,
+ p->link_config.duplex == DUPLEX_FULL ? "full" : "half");
+ }
+}
+
+/**
+ * t3_os_link_changed - handle link status changes
+ * @adapter: the adapter associated with the link change
+ * @port_id: the port index whose limk status has changed
+ * @link_stat: the new status of the link
+ * @speed: the new speed setting
+ * @duplex: the new duplex setting
+ * @pause: the new flow-control setting
+ *
+ * This is the OS-dependent handler for link status changes. The OS
+ * neutral handler takes care of most of the processing for these events,
+ * then calls this handler for any OS-specific processing.
+ */
+void t3_os_link_changed(struct adapter *adapter, int port_id, int link_stat,
+ int speed, int duplex, int pause)
+{
+ struct net_device *dev = adapter->port[port_id];
+
+ /* Skip changes from disabled ports. */
+ if (!netif_running(dev))
+ return;
+
+ if (link_stat != netif_carrier_ok(dev)) {
+ if (link_stat)
+ netif_carrier_on(dev);
+ else
+ netif_carrier_off(dev);
+ link_report(dev);
+ }
+}
+
+static void cxgb_set_rxmode(struct net_device *dev)
+{
+ struct t3_rx_mode rm;
+ struct port_info *pi = netdev_priv(dev);
+
+ init_rx_mode(&rm, dev, dev->mc_list);
+ t3_mac_set_rx_mode(&pi->mac, &rm);
+}
+
+/**
+ * link_start - enable a port
+ * @dev: the device to enable
+ *
+ * Performs the MAC and PHY actions needed to enable a port.
+ */
+static void link_start(struct net_device *dev)
+{
+ struct t3_rx_mode rm;
+ struct port_info *pi = netdev_priv(dev);
+ struct cmac *mac = &pi->mac;
+
+ init_rx_mode(&rm, dev, dev->mc_list);
+ t3_mac_reset(mac);
+ t3_mac_set_mtu(mac, dev->mtu);
+ t3_mac_set_address(mac, 0, dev->dev_addr);
+ t3_mac_set_rx_mode(mac, &rm);
+ t3_link_start(&pi->phy, mac, &pi->link_config);
+ t3_mac_enable(mac, MAC_DIRECTION_RX | MAC_DIRECTION_TX);
+}
+
+static inline void cxgb_disable_msi(struct adapter *adapter)
+{
+ if (adapter->flags & USING_MSIX) {
+ pci_disable_msix(adapter->pdev);
+ adapter->flags &= ~USING_MSIX;
+ } else if (adapter->flags & USING_MSI) {
+ pci_disable_msi(adapter->pdev);
+ adapter->flags &= ~USING_MSI;
+ }
+}
+
+/*
+ * Interrupt handler for asynchronous events used with MSI-X.
+ */
+static irqreturn_t t3_async_intr_handler(int irq, void *cookie)
+{
+ t3_slow_intr_handler(cookie);
+ return IRQ_HANDLED;
+}
+
+/*
+ * Name the MSI-X interrupts.
+ */
+static void name_msix_vecs(struct adapter *adap)
+{
+ int i, j, msi_idx = 1, n = sizeof(adap->msix_info[0].desc) - 1;
+
+ snprintf(adap->msix_info[0].desc, n, "%s", adap->name);
+ adap->msix_info[0].desc[n] = 0;
+
+ for_each_port(adap, j) {
+ struct net_device *d = adap->port[j];
+ const struct port_info *pi = netdev_priv(d);
+
+ for (i = 0; i < pi->nqsets; i++, msi_idx++) {
+ snprintf(adap->msix_info[msi_idx].desc, n,
+ "%s (queue %d)", d->name, i);
+ adap->msix_info[msi_idx].desc[n] = 0;
+ }
+ }
+}
+
+static int request_msix_data_irqs(struct adapter *adap)
+{
+ int i, j, err, qidx = 0;
+
+ for_each_port(adap, i) {
+ int nqsets = adap2pinfo(adap, i)->nqsets;
+
+ for (j = 0; j < nqsets; ++j) {
+ err = request_irq(adap->msix_info[qidx + 1].vec,
+ t3_intr_handler(adap,
+ adap->sge.qs[qidx].
+ rspq.polling), 0,
+ adap->msix_info[qidx + 1].desc,
+ &adap->sge.qs[qidx]);
+ if (err) {
+ while (--qidx >= 0)
+ free_irq(adap->msix_info[qidx + 1].vec,
+ &adap->sge.qs[qidx]);
+ return err;
+ }
+ qidx++;
+ }
+ }
+ return 0;
+}
+
+/**
+ * setup_rss - configure RSS
+ * @adap: the adapter
+ *
+ * Sets up RSS to distribute packets to multiple receive queues. We
+ * configure the RSS CPU lookup table to distribute to the number of HW
+ * receive queues, and the response queue lookup table to narrow that
+ * down to the response queues actually configured for each port.
+ * We always configure the RSS mapping for two ports since the mapping
+ * table has plenty of entries.
+ */
+static void setup_rss(struct adapter *adap)
+{
+ int i;
+ unsigned int nq0 = adap2pinfo(adap, 0)->nqsets;
+ unsigned int nq1 = adap->port[1] ? adap2pinfo(adap, 1)->nqsets : 1;
+ u8 cpus[SGE_QSETS + 1];
+ u16 rspq_map[RSS_TABLE_SIZE];
+
+ for (i = 0; i < SGE_QSETS; ++i)
+ cpus[i] = i;
+ cpus[SGE_QSETS] = 0xff; /* terminator */
+
+ for (i = 0; i < RSS_TABLE_SIZE / 2; ++i) {
+ rspq_map[i] = i % nq0;
+ rspq_map[i + RSS_TABLE_SIZE / 2] = (i % nq1) + nq0;
+ }
+
+ t3_config_rss(adap, F_RQFEEDBACKENABLE | F_TNLLKPEN | F_TNLMAPEN |
+ F_TNLPRTEN | F_TNL2TUPEN | F_TNL4TUPEN |
+ V_RRCPLCPUSIZE(6), cpus, rspq_map);
+}
+
+/*
+ * If we have multiple receive queues per port serviced by NAPI we need one
+ * netdevice per queue as NAPI operates on netdevices. We already have one
+ * netdevice, namely the one associated with the interface, so we use dummy
+ * ones for any additional queues. Note that these netdevices exist purely
+ * so that NAPI has something to work with, they do not represent network
+ * ports and are not registered.
+ */
+static int init_dummy_netdevs(struct adapter *adap)
+{
+ int i, j, dummy_idx = 0;
+ struct net_device *nd;
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ const struct port_info *pi = netdev_priv(dev);
+
+ for (j = 0; j < pi->nqsets - 1; j++) {
+ if (!adap->dummy_netdev[dummy_idx]) {
+ nd = alloc_netdev(0, "", ether_setup);
+ if (!nd)
+ goto free_all;
+
+ nd->priv = adap;
+ nd->weight = 64;
+ set_bit(__LINK_STATE_START, &nd->state);
+ adap->dummy_netdev[dummy_idx] = nd;
+ }
+ strcpy(adap->dummy_netdev[dummy_idx]->name, dev->name);
+ dummy_idx++;
+ }
+ }
+ return 0;
+
+free_all:
+ while (--dummy_idx >= 0) {
+ free_netdev(adap->dummy_netdev[dummy_idx]);
+ adap->dummy_netdev[dummy_idx] = NULL;
+ }
+ return -ENOMEM;
+}
+
+/*
+ * Wait until all NAPI handlers are descheduled. This includes the handlers of
+ * both netdevices representing interfaces and the dummy ones for the extra
+ * queues.
+ */
+static void quiesce_rx(struct adapter *adap)
+{
+ int i;
+ struct net_device *dev;
+
+ for_each_port(adap, i) {
+ dev = adap->port[i];
+ while (test_bit(__LINK_STATE_RX_SCHED, &dev->state))
+ msleep(1);
+ }
+
+ for (i = 0; i < ARRAY_SIZE(adap->dummy_netdev); i++) {
+ dev = adap->dummy_netdev[i];
+ if (dev)
+ while (test_bit(__LINK_STATE_RX_SCHED, &dev->state))
+ msleep(1);
+ }
+}
+
+/**
+ * setup_sge_qsets - configure SGE Tx/Rx/response queues
+ * @adap: the adapter
+ *
+ * Determines how many sets of SGE queues to use and initializes them.
+ * We support multiple queue sets per port if we have MSI-X, otherwise
+ * just one queue set per port.
+ */
+static int setup_sge_qsets(struct adapter *adap)
+{
+ int i, j, err, irq_idx = 0, qset_idx = 0, dummy_dev_idx = 0;
+ unsigned int ntxq = is_offload(adap) ? SGE_TXQ_PER_SET : 1;
+
+ if (adap->params.rev > 0 && !(adap->flags & USING_MSI))
+ irq_idx = -1;
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ const struct port_info *pi = netdev_priv(dev);
+
+ for (j = 0; j < pi->nqsets; ++j, ++qset_idx) {
+ err = t3_sge_alloc_qset(adap, qset_idx, 1,
+ (adap->flags & USING_MSIX) ? qset_idx + 1 :
+ irq_idx,
+ &adap->params.sge.qset[qset_idx], ntxq,
+ j == 0 ? dev :
+ adap-> dummy_netdev[dummy_dev_idx++]);
+ if (err) {
+ t3_free_sge_resources(adap);
+ return err;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static ssize_t attr_show(struct class_device *cd, char *buf,
+ ssize_t(*format) (struct adapter *, char *))
+{
+ ssize_t len;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ /* Synchronize with ioctls that may shut down the device */
+ rtnl_lock();
+ len = (*format) (adap, buf);
+ rtnl_unlock();
+ return len;
+}
+
+static ssize_t attr_store(struct class_device *cd, const char *buf, size_t len,
+ ssize_t(*set) (struct adapter *, unsigned int),
+ unsigned int min_val, unsigned int max_val)
+{
+ char *endp;
+ ssize_t ret;
+ unsigned int val;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ val = simple_strtoul(buf, &endp, 0);
+ if (endp == buf || val < min_val || val > max_val)
+ return -EINVAL;
+
+ rtnl_lock();
+ ret = (*set) (adap, val);
+ if (!ret)
+ ret = len;
+ rtnl_unlock();
+ return ret;
+}
+
+#define CXGB3_SHOW(name, val_expr) \
+static ssize_t format_##name(struct adapter *adap, char *buf) \
+{ \
+ return sprintf(buf, "%u\n", val_expr); \
+} \
+static ssize_t show_##name(struct class_device *cd, char *buf) \
+{ \
+ return attr_show(cd, buf, format_##name); \
+}
+
+static ssize_t set_nfilters(struct adapter *adap, unsigned int val)
+{
+ if (adap->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (val && adap->params.rev == 0)
+ return -EINVAL;
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers)
+ return -EINVAL;
+ adap->params.mc5.nfilters = val;
+ return 0;
+}
+
+static ssize_t store_nfilters(struct class_device *cd, const char *buf,
+ size_t len)
+{
+ return attr_store(cd, buf, len, set_nfilters, 0, ~0);
+}
+
+static ssize_t set_nservers(struct adapter *adap, unsigned int val)
+{
+ if (adap->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (val > t3_mc5_size(&adap->mc5) - adap->params.mc5.nfilters)
+ return -EINVAL;
+ adap->params.mc5.nservers = val;
+ return 0;
+}
+
+static ssize_t store_nservers(struct class_device *cd, const char *buf,
+ size_t len)
+{
+ return attr_store(cd, buf, len, set_nservers, 0, ~0);
+}
+
+#define CXGB3_ATTR_R(name, val_expr) \
+CXGB3_SHOW(name, val_expr) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+
+#define CXGB3_ATTR_RW(name, val_expr, store_method) \
+CXGB3_SHOW(name, val_expr) \
+static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_method)
+
+CXGB3_ATTR_R(cam_size, t3_mc5_size(&adap->mc5));
+CXGB3_ATTR_RW(nfilters, adap->params.mc5.nfilters, store_nfilters);
+CXGB3_ATTR_RW(nservers, adap->params.mc5.nservers, store_nservers);
+
+static struct attribute *cxgb3_attrs[] = {
+ &class_device_attr_cam_size.attr,
+ &class_device_attr_nfilters.attr,
+ &class_device_attr_nservers.attr,
+ NULL
+};
+
+static struct attribute_group cxgb3_attr_group = {.attrs = cxgb3_attrs };
+
+static ssize_t tm_attr_show(struct class_device *cd, char *buf, int sched)
+{
+ ssize_t len;
+ unsigned int v, addr, bpt, cpt;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ addr = A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2;
+ rtnl_lock();
+ t3_write_reg(adap, A_TP_TM_PIO_ADDR, addr);
+ v = t3_read_reg(adap, A_TP_TM_PIO_DATA);
+ if (sched & 1)
+ v >>= 16;
+ bpt = (v >> 8) & 0xff;
+ cpt = v & 0xff;
+ if (!cpt)
+ len = sprintf(buf, "disabled\n");
+ else {
+ v = (adap->params.vpd.cclk * 1000) / cpt;
+ len = sprintf(buf, "%u Kbps\n", (v * bpt) / 125);
+ }
+ rtnl_unlock();
+ return len;
+}
+
+static ssize_t tm_attr_store(struct class_device *cd, const char *buf,
+ size_t len, int sched)
+{
+ char *endp;
+ ssize_t ret;
+ unsigned int val;
+ struct adapter *adap = to_net_dev(cd)->priv;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ val = simple_strtoul(buf, &endp, 0);
+ if (endp == buf || val > 10000000)
+ return -EINVAL;
+
+ rtnl_lock();
+ ret = t3_config_sched(adap, val, sched);
+ if (!ret)
+ ret = len;
+ rtnl_unlock();
+ return ret;
+}
+
+#define TM_ATTR(name, sched) \
+static ssize_t show_##name(struct class_device *cd, char *buf) \
+{ \
+ return tm_attr_show(cd, buf, sched); \
+} \
+static ssize_t store_##name(struct class_device *cd, const char *buf, size_t len) \
+{ \
+ return tm_attr_store(cd, buf, len, sched); \
+} \
+static CLASS_DEVICE_ATTR(name, S_IRUGO | S_IWUSR, show_##name, store_##name)
+
+TM_ATTR(sched0, 0);
+TM_ATTR(sched1, 1);
+TM_ATTR(sched2, 2);
+TM_ATTR(sched3, 3);
+TM_ATTR(sched4, 4);
+TM_ATTR(sched5, 5);
+TM_ATTR(sched6, 6);
+TM_ATTR(sched7, 7);
+
+static struct attribute *offload_attrs[] = {
+ &class_device_attr_sched0.attr,
+ &class_device_attr_sched1.attr,
+ &class_device_attr_sched2.attr,
+ &class_device_attr_sched3.attr,
+ &class_device_attr_sched4.attr,
+ &class_device_attr_sched5.attr,
+ &class_device_attr_sched6.attr,
+ &class_device_attr_sched7.attr,
+ NULL
+};
+
+static struct attribute_group offload_attr_group = {.attrs = offload_attrs };
+
+/*
+ * Sends an sk_buff to an offload queue driver
+ * after dealing with any active network taps.
+ */
+static inline int offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
+{
+ int ret;
+
+ local_bh_disable();
+ ret = t3_offload_tx(tdev, skb);
+ local_bh_enable();
+ return ret;
+}
+
+static int write_smt_entry(struct adapter *adapter, int idx)
+{
+ struct cpl_smt_write_req *req;
+ struct sk_buff *skb = alloc_skb(sizeof(*req), GFP_KERNEL);
+
+ if (!skb)
+ return -ENOMEM;
+
+ req = (struct cpl_smt_write_req *)__skb_put(skb, sizeof(*req));
+ req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SMT_WRITE_REQ, idx));
+ req->mtu_idx = NMTUS - 1; /* should be 0 but there's a T3 bug */
+ req->iff = idx;
+ memset(req->src_mac1, 0, sizeof(req->src_mac1));
+ memcpy(req->src_mac0, adapter->port[idx]->dev_addr, ETH_ALEN);
+ skb->priority = 1;
+ offload_tx(&adapter->tdev, skb);
+ return 0;
+}
+
+static int init_smt(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i)
+ write_smt_entry(adapter, i);
+ return 0;
+}
+
+static void init_port_mtus(struct adapter *adapter)
+{
+ unsigned int mtus = adapter->port[0]->mtu;
+
+ if (adapter->port[1])
+ mtus |= adapter->port[1]->mtu << 16;
+ t3_write_reg(adapter, A_TP_MTU_PORT_TABLE, mtus);
+}
+
+static void send_pktsched_cmd(struct adapter *adap, int sched, int qidx, int lo,
+ int hi, int port)
+{
+ struct sk_buff *skb;
+ struct mngt_pktsched_wr *req;
+
+ skb = alloc_skb(sizeof(*req), GFP_KERNEL | __GFP_NOFAIL);
+ req = (struct mngt_pktsched_wr *)skb_put(skb, sizeof(*req));
+ req->wr_hi = htonl(V_WR_OP(FW_WROPCODE_MNGT));
+ req->mngt_opcode = FW_MNGTOPCODE_PKTSCHED_SET;
+ req->sched = sched;
+ req->idx = qidx;
+ req->min = lo;
+ req->max = hi;
+ req->binding = port;
+ t3_mgmt_tx(adap, skb);
+}
+
+static void bind_qsets(struct adapter *adap)
+{
+ int i, j;
+
+ for_each_port(adap, i) {
+ const struct port_info *pi = adap2pinfo(adap, i);
+
+ for (j = 0; j < pi->nqsets; ++j)
+ send_pktsched_cmd(adap, 1, pi->first_qset + j, -1,
+ -1, i);
+ }
+}
+
+/**
+ * cxgb_up - enable the adapter
+ * @adapter: adapter being enabled
+ *
+ * Called when the first port is enabled, this function performs the
+ * actions necessary to make an adapter operational, such as completing
+ * the initialization of HW modules, and enabling interrupts.
+ *
+ * Must be called with the rtnl lock held.
+ */
+static int cxgb_up(struct adapter *adap)
+{
+ int err = 0;
+
+ if (!(adap->flags & FULL_INIT_DONE)) {
+ err = t3_check_fw_version(adap);
+ if (err)
+ goto out;
+
+ err = init_dummy_netdevs(adap);
+ if (err)
+ goto out;
+
+ err = t3_init_hw(adap, 0);
+ if (err)
+ goto out;
+
+ err = setup_sge_qsets(adap);
+ if (err)
+ goto out;
+
+ setup_rss(adap);
+ adap->flags |= FULL_INIT_DONE;
+ }
+
+ t3_intr_clear(adap);
+
+ if (adap->flags & USING_MSIX) {
+ name_msix_vecs(adap);
+ err = request_irq(adap->msix_info[0].vec,
+ t3_async_intr_handler, 0,
+ adap->msix_info[0].desc, adap);
+ if (err)
+ goto irq_err;
+
+ if (request_msix_data_irqs(adap)) {
+ free_irq(adap->msix_info[0].vec, adap);
+ goto irq_err;
+ }
+ } else if ((err = request_irq(adap->pdev->irq,
+ t3_intr_handler(adap,
+ adap->sge.qs[0].rspq.
+ polling),
+ (adap->flags & USING_MSI) ? 0 : SA_SHIRQ,
+ adap->name, adap)))
+ goto irq_err;
+
+ t3_sge_start(adap);
+ t3_intr_enable(adap);
+
+ if ((adap->flags & (USING_MSIX | QUEUES_BOUND)) == USING_MSIX)
+ bind_qsets(adap);
+ adap->flags |= QUEUES_BOUND;
+
+out:
+ return err;
+irq_err:
+ CH_ERR(adap, "request_irq failed, err %d\n", err);
+ goto out;
+}
+
+/*
+ * Release resources when all the ports and offloading have been stopped.
+ */
+static void cxgb_down(struct adapter *adapter)
+{
+ t3_sge_stop(adapter);
+ spin_lock_irq(&adapter->work_lock); /* sync with PHY intr task */
+ t3_intr_disable(adapter);
+ spin_unlock_irq(&adapter->work_lock);
+
+ if (adapter->flags & USING_MSIX) {
+ int i, n = 0;
+
+ free_irq(adapter->msix_info[0].vec, adapter);
+ for_each_port(adapter, i)
+ n += adap2pinfo(adapter, i)->nqsets;
+
+ for (i = 0; i < n; ++i)
+ free_irq(adapter->msix_info[i + 1].vec,
+ &adapter->sge.qs[i]);
+ } else
+ free_irq(adapter->pdev->irq, adapter);
+
+ flush_workqueue(cxgb3_wq); /* wait for external IRQ handler */
+ quiesce_rx(adapter);
+}
+
+static void schedule_chk_task(struct adapter *adap)
+{
+ unsigned int timeo;
+
+ timeo = adap->params.linkpoll_period ?
+ (HZ * adap->params.linkpoll_period) / 10 :
+ adap->params.stats_update_period * HZ;
+ if (timeo)
+ queue_delayed_work(cxgb3_wq, &adap->adap_check_task, timeo);
+}
+
+static int offload_open(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct t3cdev *tdev = T3CDEV(dev);
+ int adap_up = adapter->open_device_map & PORT_MASK;
+ int err = 0;
+
+ if (test_and_set_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
+ return 0;
+
+ if (!adap_up && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ t3_tp_set_offload_mode(adapter, 1);
+ tdev->lldev = adapter->port[0];
+ err = cxgb3_offload_activate(adapter);
+ if (err)
+ goto out;
+
+ init_port_mtus(adapter);
+ t3_load_mtus(adapter, adapter->params.mtus, adapter->params.a_wnd,
+ adapter->params.b_wnd,
+ adapter->params.rev == 0 ?
+ adapter->port[0]->mtu : 0xffff);
+ init_smt(adapter);
+
+ /* Never mind if the next step fails */
+ sysfs_create_group(&tdev->lldev->class_dev.kobj, &offload_attr_group);
+
+ /* Call back all registered clients */
+ cxgb3_add_clients(tdev);
+
+out:
+ /* restore them in case the offload module has changed them */
+ if (err) {
+ t3_tp_set_offload_mode(adapter, 0);
+ clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
+ cxgb3_set_dummy_ops(tdev);
+ }
+ return err;
+}
+
+static int offload_close(struct t3cdev *tdev)
+{
+ struct adapter *adapter = tdev2adap(tdev);
+
+ if (!test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map))
+ return 0;
+
+ /* Call back all registered clients */
+ cxgb3_remove_clients(tdev);
+
+ sysfs_remove_group(&tdev->lldev->class_dev.kobj, &offload_attr_group);
+
+ tdev->lldev = NULL;
+ cxgb3_set_dummy_ops(tdev);
+ t3_tp_set_offload_mode(adapter, 0);
+ clear_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map);
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+
+ cxgb3_offload_deactivate(adapter);
+ return 0;
+}
+
+static int cxgb_open(struct net_device *dev)
+{
+ int err;
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+ int other_ports = adapter->open_device_map & PORT_MASK;
+
+ if (!adapter->open_device_map && (err = cxgb_up(adapter)) < 0)
+ return err;
+
+ set_bit(pi->port_id, &adapter->open_device_map);
+ if (!ofld_disable) {
+ err = offload_open(dev);
+ if (err)
+ printk(KERN_WARNING
+ "Could not initialize offload capabilities\n");
+ }
+
+ link_start(dev);
+ t3_port_intr_enable(adapter, pi->port_id);
+ netif_start_queue(dev);
+ if (!other_ports)
+ schedule_chk_task(adapter);
+
+ return 0;
+}
+
+static int cxgb_close(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = netdev_priv(dev);
+
+ t3_port_intr_disable(adapter, p->port_id);
+ netif_stop_queue(dev);
+ p->phy.ops->power_down(&p->phy, 1);
+ netif_carrier_off(dev);
+ t3_mac_disable(&p->mac, MAC_DIRECTION_TX | MAC_DIRECTION_RX);
+
+ spin_lock(&adapter->work_lock); /* sync with update task */
+ clear_bit(p->port_id, &adapter->open_device_map);
+ spin_unlock(&adapter->work_lock);
+
+ if (!(adapter->open_device_map & PORT_MASK))
+ cancel_rearming_delayed_workqueue(cxgb3_wq,
+ &adapter->adap_check_task);
+
+ if (!adapter->open_device_map)
+ cxgb_down(adapter);
+
+ return 0;
+}
+
+static struct net_device_stats *cxgb_get_stats(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *p = netdev_priv(dev);
+ struct net_device_stats *ns = &p->netstats;
+ const struct mac_stats *pstats;
+
+ spin_lock(&adapter->stats_lock);
+ pstats = t3_mac_update_stats(&p->mac);
+ spin_unlock(&adapter->stats_lock);
+
+ ns->tx_bytes = pstats->tx_octets;
+ ns->tx_packets = pstats->tx_frames;
+ ns->rx_bytes = pstats->rx_octets;
+ ns->rx_packets = pstats->rx_frames;
+ ns->multicast = pstats->rx_mcast_frames;
+
+ ns->tx_errors = pstats->tx_underrun;
+ ns->rx_errors = pstats->rx_symbol_errs + pstats->rx_fcs_errs +
+ pstats->rx_too_long + pstats->rx_jabber + pstats->rx_short +
+ pstats->rx_fifo_ovfl;
+
+ /* detailed rx_errors */
+ ns->rx_length_errors = pstats->rx_jabber + pstats->rx_too_long;
+ ns->rx_over_errors = 0;
+ ns->rx_crc_errors = pstats->rx_fcs_errs;
+ ns->rx_frame_errors = pstats->rx_symbol_errs;
+ ns->rx_fifo_errors = pstats->rx_fifo_ovfl;
+ ns->rx_missed_errors = pstats->rx_cong_drops;
+
+ /* detailed tx_errors */
+ ns->tx_aborted_errors = 0;
+ ns->tx_carrier_errors = 0;
+ ns->tx_fifo_errors = pstats->tx_underrun;
+ ns->tx_heartbeat_errors = 0;
+ ns->tx_window_errors = 0;
+ return ns;
+}
+
+static u32 get_msglevel(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+
+ return adapter->msg_enable;
+}
+
+static void set_msglevel(struct net_device *dev, u32 val)
+{
+ struct adapter *adapter = dev->priv;
+
+ adapter->msg_enable = val;
+}
+
+static char stats_strings[][ETH_GSTRING_LEN] = {
+ "TxOctetsOK ",
+ "TxFramesOK ",
+ "TxMulticastFramesOK",
+ "TxBroadcastFramesOK",
+ "TxPauseFrames ",
+ "TxUnderrun ",
+ "TxExtUnderrun ",
+
+ "TxFrames64 ",
+ "TxFrames65To127 ",
+ "TxFrames128To255 ",
+ "TxFrames256To511 ",
+ "TxFrames512To1023 ",
+ "TxFrames1024To1518 ",
+ "TxFrames1519ToMax ",
+
+ "RxOctetsOK ",
+ "RxFramesOK ",
+ "RxMulticastFramesOK",
+ "RxBroadcastFramesOK",
+ "RxPauseFrames ",
+ "RxFCSErrors ",
+ "RxSymbolErrors ",
+ "RxShortErrors ",
+ "RxJabberErrors ",
+ "RxLengthErrors ",
+ "RxFIFOoverflow ",
+
+ "RxFrames64 ",
+ "RxFrames65To127 ",
+ "RxFrames128To255 ",
+ "RxFrames256To511 ",
+ "RxFrames512To1023 ",
+ "RxFrames1024To1518 ",
+ "RxFrames1519ToMax ",
+
+ "PhyFIFOErrors ",
+ "TSO ",
+ "VLANextractions ",
+ "VLANinsertions ",
+ "TxCsumOffload ",
+ "RxCsumGood ",
+ "RxDrops "
+};
+
+static int get_stats_count(struct net_device *dev)
+{
+ return ARRAY_SIZE(stats_strings);
+}
+
+#define T3_REGMAP_SIZE (3 * 1024)
+
+static int get_regs_len(struct net_device *dev)
+{
+ return T3_REGMAP_SIZE;
+}
+
+static int get_eeprom_len(struct net_device *dev)
+{
+ return EEPROMSIZE;
+}
+
+static void get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ u32 fw_vers = 0;
+ struct adapter *adapter = dev->priv;
+
+ t3_get_fw_version(adapter, &fw_vers);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ strcpy(info->bus_info, pci_name(adapter->pdev));
+ if (!fw_vers)
+ strcpy(info->fw_version, "N/A");
+ else {
+ snprintf(info->fw_version, sizeof(info->fw_version),
+ "%s %u.%u.%u",
+ G_FW_VERSION_TYPE(fw_vers) ? "T" : "N",
+ G_FW_VERSION_MAJOR(fw_vers),
+ G_FW_VERSION_MINOR(fw_vers),
+ G_FW_VERSION_MICRO(fw_vers));
+ }
+}
+
+static void get_strings(struct net_device *dev, u32 stringset, u8 * data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, stats_strings, sizeof(stats_strings));
+}
+
+static unsigned long collect_sge_port_stats(struct adapter *adapter,
+ struct port_info *p, int idx)
+{
+ int i;
+ unsigned long tot = 0;
+
+ for (i = 0; i < p->nqsets; ++i)
+ tot += adapter->sge.qs[i + p->first_qset].port_stats[idx];
+ return tot;
+}
+
+static void get_stats(struct net_device *dev, struct ethtool_stats *stats,
+ u64 *data)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+ const struct mac_stats *s;
+
+ spin_lock(&adapter->stats_lock);
+ s = t3_mac_update_stats(&pi->mac);
+ spin_unlock(&adapter->stats_lock);
+
+ *data++ = s->tx_octets;
+ *data++ = s->tx_frames;
+ *data++ = s->tx_mcast_frames;
+ *data++ = s->tx_bcast_frames;
+ *data++ = s->tx_pause;
+ *data++ = s->tx_underrun;
+ *data++ = s->tx_fifo_urun;
+
+ *data++ = s->tx_frames_64;
+ *data++ = s->tx_frames_65_127;
+ *data++ = s->tx_frames_128_255;
+ *data++ = s->tx_frames_256_511;
+ *data++ = s->tx_frames_512_1023;
+ *data++ = s->tx_frames_1024_1518;
+ *data++ = s->tx_frames_1519_max;
+
+ *data++ = s->rx_octets;
+ *data++ = s->rx_frames;
+ *data++ = s->rx_mcast_frames;
+ *data++ = s->rx_bcast_frames;
+ *data++ = s->rx_pause;
+ *data++ = s->rx_fcs_errs;
+ *data++ = s->rx_symbol_errs;
+ *data++ = s->rx_short;
+ *data++ = s->rx_jabber;
+ *data++ = s->rx_too_long;
+ *data++ = s->rx_fifo_ovfl;
+
+ *data++ = s->rx_frames_64;
+ *data++ = s->rx_frames_65_127;
+ *data++ = s->rx_frames_128_255;
+ *data++ = s->rx_frames_256_511;
+ *data++ = s->rx_frames_512_1023;
+ *data++ = s->rx_frames_1024_1518;
+ *data++ = s->rx_frames_1519_max;
+
+ *data++ = pi->phy.fifo_errors;
+
+ *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TSO);
+ *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANEX);
+ *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_VLANINS);
+ *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_TX_CSUM);
+ *data++ = collect_sge_port_stats(adapter, pi, SGE_PSTAT_RX_CSUM_GOOD);
+ *data++ = s->rx_cong_drops;
+}
+
+static inline void reg_block_dump(struct adapter *ap, void *buf,
+ unsigned int start, unsigned int end)
+{
+ u32 *p = buf + start;
+
+ for (; start <= end; start += sizeof(u32))
+ *p++ = t3_read_reg(ap, start);
+}
+
+static void get_regs(struct net_device *dev, struct ethtool_regs *regs,
+ void *buf)
+{
+ struct adapter *ap = dev->priv;
+
+ /*
+ * Version scheme:
+ * bits 0..9: chip version
+ * bits 10..15: chip revision
+ * bit 31: set for PCIe cards
+ */
+ regs->version = 3 | (ap->params.rev << 10) | (is_pcie(ap) << 31);
+
+ /*
+ * We skip the MAC statistics registers because they are clear-on-read.
+ * Also reading multi-register stats would need to synchronize with the
+ * periodic mac stats accumulation. Hard to justify the complexity.
+ */
+ memset(buf, 0, T3_REGMAP_SIZE);
+ reg_block_dump(ap, buf, 0, A_SG_RSPQ_CREDIT_RETURN);
+ reg_block_dump(ap, buf, A_SG_HI_DRB_HI_THRSH, A_ULPRX_PBL_ULIMIT);
+ reg_block_dump(ap, buf, A_ULPTX_CONFIG, A_MPS_INT_CAUSE);
+ reg_block_dump(ap, buf, A_CPL_SWITCH_CNTRL, A_CPL_MAP_TBL_DATA);
+ reg_block_dump(ap, buf, A_SMB_GLOBAL_TIME_CFG, A_XGM_SERDES_STAT3);
+ reg_block_dump(ap, buf, A_XGM_SERDES_STATUS0,
+ XGM_REG(A_XGM_SERDES_STAT3, 1));
+ reg_block_dump(ap, buf, XGM_REG(A_XGM_SERDES_STATUS0, 1),
+ XGM_REG(A_XGM_RX_SPI4_SOP_EOP_CNT, 1));
+}
+
+static int restart_autoneg(struct net_device *dev)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ if (!netif_running(dev))
+ return -EAGAIN;
+ if (p->link_config.autoneg != AUTONEG_ENABLE)
+ return -EINVAL;
+ p->phy.ops->autoneg_restart(&p->phy);
+ return 0;
+}
+
+static int cxgb3_phys_id(struct net_device *dev, u32 data)
+{
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ if (data == 0)
+ data = 2;
+
+ for (i = 0; i < data * 2; i++) {
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ (i & 1) ? F_GPIO0_OUT_VAL : 0);
+ if (msleep_interruptible(500))
+ break;
+ }
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ F_GPIO0_OUT_VAL);
+ return 0;
+}
+
+static int get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ cmd->supported = p->link_config.supported;
+ cmd->advertising = p->link_config.advertising;
+
+ if (netif_carrier_ok(dev)) {
+ cmd->speed = p->link_config.speed;
+ cmd->duplex = p->link_config.duplex;
+ } else {
+ cmd->speed = -1;
+ cmd->duplex = -1;
+ }
+
+ cmd->port = (cmd->supported & SUPPORTED_TP) ? PORT_TP : PORT_FIBRE;
+ cmd->phy_address = p->phy.addr;
+ cmd->transceiver = XCVR_EXTERNAL;
+ cmd->autoneg = p->link_config.autoneg;
+ cmd->maxtxpkt = 0;
+ cmd->maxrxpkt = 0;
+ return 0;
+}
+
+static int speed_duplex_to_caps(int speed, int duplex)
+{
+ int cap = 0;
+
+ switch (speed) {
+ case SPEED_10:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10baseT_Full;
+ else
+ cap = SUPPORTED_10baseT_Half;
+ break;
+ case SPEED_100:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_100baseT_Full;
+ else
+ cap = SUPPORTED_100baseT_Half;
+ break;
+ case SPEED_1000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_1000baseT_Full;
+ else
+ cap = SUPPORTED_1000baseT_Half;
+ break;
+ case SPEED_10000:
+ if (duplex == DUPLEX_FULL)
+ cap = SUPPORTED_10000baseT_Full;
+ }
+ return cap;
+}
+
+#define ADVERTISED_MASK (ADVERTISED_10baseT_Half | ADVERTISED_10baseT_Full | \
+ ADVERTISED_100baseT_Half | ADVERTISED_100baseT_Full | \
+ ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full | \
+ ADVERTISED_10000baseT_Full)
+
+static int set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
+{
+ struct port_info *p = netdev_priv(dev);
+ struct link_config *lc = &p->link_config;
+
+ if (!(lc->supported & SUPPORTED_Autoneg))
+ return -EOPNOTSUPP; /* can't change speed/duplex */
+
+ if (cmd->autoneg == AUTONEG_DISABLE) {
+ int cap = speed_duplex_to_caps(cmd->speed, cmd->duplex);
+
+ if (!(lc->supported & cap) || cmd->speed == SPEED_1000)
+ return -EINVAL;
+ lc->requested_speed = cmd->speed;
+ lc->requested_duplex = cmd->duplex;
+ lc->advertising = 0;
+ } else {
+ cmd->advertising &= ADVERTISED_MASK;
+ cmd->advertising &= lc->supported;
+ if (!cmd->advertising)
+ return -EINVAL;
+ lc->requested_speed = SPEED_INVALID;
+ lc->requested_duplex = DUPLEX_INVALID;
+ lc->advertising = cmd->advertising | ADVERTISED_Autoneg;
+ }
+ lc->autoneg = cmd->autoneg;
+ if (netif_running(dev))
+ t3_link_start(&p->phy, &p->mac, lc);
+ return 0;
+}
+
+static void get_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ epause->autoneg = (p->link_config.requested_fc & PAUSE_AUTONEG) != 0;
+ epause->rx_pause = (p->link_config.fc & PAUSE_RX) != 0;
+ epause->tx_pause = (p->link_config.fc & PAUSE_TX) != 0;
+}
+
+static int set_pauseparam(struct net_device *dev,
+ struct ethtool_pauseparam *epause)
+{
+ struct port_info *p = netdev_priv(dev);
+ struct link_config *lc = &p->link_config;
+
+ if (epause->autoneg == AUTONEG_DISABLE)
+ lc->requested_fc = 0;
+ else if (lc->supported & SUPPORTED_Autoneg)
+ lc->requested_fc = PAUSE_AUTONEG;
+ else
+ return -EINVAL;
+
+ if (epause->rx_pause)
+ lc->requested_fc |= PAUSE_RX;
+ if (epause->tx_pause)
+ lc->requested_fc |= PAUSE_TX;
+ if (lc->autoneg == AUTONEG_ENABLE) {
+ if (netif_running(dev))
+ t3_link_start(&p->phy, &p->mac, lc);
+ } else {
+ lc->fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+ if (netif_running(dev))
+ t3_mac_set_speed_duplex_fc(&p->mac, -1, -1, lc->fc);
+ }
+ return 0;
+}
+
+static u32 get_rx_csum(struct net_device *dev)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ return p->rx_csum_offload;
+}
+
+static int set_rx_csum(struct net_device *dev, u32 data)
+{
+ struct port_info *p = netdev_priv(dev);
+
+ p->rx_csum_offload = data;
+ return 0;
+}
+
+static void get_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ struct adapter *adapter = dev->priv;
+
+ e->rx_max_pending = MAX_RX_BUFFERS;
+ e->rx_mini_max_pending = 0;
+ e->rx_jumbo_max_pending = MAX_RX_JUMBO_BUFFERS;
+ e->tx_max_pending = MAX_TXQ_ENTRIES;
+
+ e->rx_pending = adapter->params.sge.qset[0].fl_size;
+ e->rx_mini_pending = adapter->params.sge.qset[0].rspq_size;
+ e->rx_jumbo_pending = adapter->params.sge.qset[0].jumbo_size;
+ e->tx_pending = adapter->params.sge.qset[0].txq_size[0];
+}
+
+static int set_sge_param(struct net_device *dev, struct ethtool_ringparam *e)
+{
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ if (e->rx_pending > MAX_RX_BUFFERS ||
+ e->rx_jumbo_pending > MAX_RX_JUMBO_BUFFERS ||
+ e->tx_pending > MAX_TXQ_ENTRIES ||
+ e->rx_mini_pending > MAX_RSPQ_ENTRIES ||
+ e->rx_mini_pending < MIN_RSPQ_ENTRIES ||
+ e->rx_pending < MIN_FL_ENTRIES ||
+ e->rx_jumbo_pending < MIN_FL_ENTRIES ||
+ e->tx_pending < adapter->params.nports * MIN_TXQ_ENTRIES)
+ return -EINVAL;
+
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+
+ for (i = 0; i < SGE_QSETS; ++i) {
+ struct qset_params *q = &adapter->params.sge.qset[i];
+
+ q->rspq_size = e->rx_mini_pending;
+ q->fl_size = e->rx_pending;
+ q->jumbo_size = e->rx_jumbo_pending;
+ q->txq_size[0] = e->tx_pending;
+ q->txq_size[1] = e->tx_pending;
+ q->txq_size[2] = e->tx_pending;
+ }
+ return 0;
+}
+
+static int set_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+ struct qset_params *qsp = &adapter->params.sge.qset[0];
+ struct sge_qset *qs = &adapter->sge.qs[0];
+
+ if (c->rx_coalesce_usecs * 10 > M_NEWTIMER)
+ return -EINVAL;
+
+ qsp->coalesce_usecs = c->rx_coalesce_usecs;
+ t3_update_qset_coalesce(qs, qsp);
+ return 0;
+}
+
+static int get_coalesce(struct net_device *dev, struct ethtool_coalesce *c)
+{
+ struct adapter *adapter = dev->priv;
+ struct qset_params *q = adapter->params.sge.qset;
+
+ c->rx_coalesce_usecs = q->coalesce_usecs;
+ return 0;
+}
+
+static int get_eeprom(struct net_device *dev, struct ethtool_eeprom *e,
+ u8 * data)
+{
+ int i, err = 0;
+ struct adapter *adapter = dev->priv;
+
+ u8 *buf = kmalloc(EEPROMSIZE, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ e->magic = EEPROM_MAGIC;
+ for (i = e->offset & ~3; !err && i < e->offset + e->len; i += 4)
+ err = t3_seeprom_read(adapter, i, (u32 *) & buf[i]);
+
+ if (!err)
+ memcpy(data, buf + e->offset, e->len);
+ kfree(buf);
+ return err;
+}
+
+static int set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 * data)
+{
+ u8 *buf;
+ int err = 0;
+ u32 aligned_offset, aligned_len, *p;
+ struct adapter *adapter = dev->priv;
+
+ if (eeprom->magic != EEPROM_MAGIC)
+ return -EINVAL;
+
+ aligned_offset = eeprom->offset & ~3;
+ aligned_len = (eeprom->len + (eeprom->offset & 3) + 3) & ~3;
+
+ if (aligned_offset != eeprom->offset || aligned_len != eeprom->len) {
+ buf = kmalloc(aligned_len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+ err = t3_seeprom_read(adapter, aligned_offset, (u32 *) buf);
+ if (!err && aligned_len > 4)
+ err = t3_seeprom_read(adapter,
+ aligned_offset + aligned_len - 4,
+ (u32 *) & buf[aligned_len - 4]);
+ if (err)
+ goto out;
+ memcpy(buf + (eeprom->offset & 3), data, eeprom->len);
+ } else
+ buf = data;
+
+ err = t3_seeprom_wp(adapter, 0);
+ if (err)
+ goto out;
+
+ for (p = (u32 *) buf; !err && aligned_len; aligned_len -= 4, p++) {
+ err = t3_seeprom_write(adapter, aligned_offset, *p);
+ aligned_offset += 4;
+ }
+
+ if (!err)
+ err = t3_seeprom_wp(adapter, 1);
+out:
+ if (buf != data)
+ kfree(buf);
+ return err;
+}
+
+static void get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ wol->supported = 0;
+ wol->wolopts = 0;
+ memset(&wol->sopass, 0, sizeof(wol->sopass));
+}
+
+static const struct ethtool_ops cxgb_ethtool_ops = {
+ .get_settings = get_settings,
+ .set_settings = set_settings,
+ .get_drvinfo = get_drvinfo,
+ .get_msglevel = get_msglevel,
+ .set_msglevel = set_msglevel,
+ .get_ringparam = get_sge_param,
+ .set_ringparam = set_sge_param,
+ .get_coalesce = get_coalesce,
+ .set_coalesce = set_coalesce,
+ .get_eeprom_len = get_eeprom_len,
+ .get_eeprom = get_eeprom,
+ .set_eeprom = set_eeprom,
+ .get_pauseparam = get_pauseparam,
+ .set_pauseparam = set_pauseparam,
+ .get_rx_csum = get_rx_csum,
+ .set_rx_csum = set_rx_csum,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .set_tx_csum = ethtool_op_set_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .set_sg = ethtool_op_set_sg,
+ .get_link = ethtool_op_get_link,
+ .get_strings = get_strings,
+ .phys_id = cxgb3_phys_id,
+ .nway_reset = restart_autoneg,
+ .get_stats_count = get_stats_count,
+ .get_ethtool_stats = get_stats,
+ .get_regs_len = get_regs_len,
+ .get_regs = get_regs,
+ .get_wol = get_wol,
+ .get_tso = ethtool_op_get_tso,
+ .set_tso = ethtool_op_set_tso,
+ .get_perm_addr = ethtool_op_get_perm_addr
+};
+
+static int in_range(int val, int lo, int hi)
+{
+ return val < 0 || (val <= hi && val >= lo);
+}
+
+static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr)
+{
+ int ret;
+ u32 cmd;
+ struct adapter *adapter = dev->priv;
+
+ if (copy_from_user(&cmd, useraddr, sizeof(cmd)))
+ return -EFAULT;
+
+ switch (cmd) {
+ case CHELSIO_SETREG:{
+ struct ch_reg edata;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if ((edata.addr & 3) != 0
+ || edata.addr >= adapter->mmio_len)
+ return -EINVAL;
+ writel(edata.val, adapter->regs + edata.addr);
+ break;
+ }
+ case CHELSIO_GETREG:{
+ struct ch_reg edata;
+
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if ((edata.addr & 3) != 0
+ || edata.addr >= adapter->mmio_len)
+ return -EINVAL;
+ edata.val = readl(adapter->regs + edata.addr);
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_QSET_PARAMS:{
+ int i;
+ struct qset_params *q;
+ struct ch_qset_params t;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if (t.qset_idx >= SGE_QSETS)
+ return -EINVAL;
+ if (!in_range(t.intr_lat, 0, M_NEWTIMER) ||
+ !in_range(t.cong_thres, 0, 255) ||
+ !in_range(t.txq_size[0], MIN_TXQ_ENTRIES,
+ MAX_TXQ_ENTRIES) ||
+ !in_range(t.txq_size[1], MIN_TXQ_ENTRIES,
+ MAX_TXQ_ENTRIES) ||
+ !in_range(t.txq_size[2], MIN_CTRL_TXQ_ENTRIES,
+ MAX_CTRL_TXQ_ENTRIES) ||
+ !in_range(t.fl_size[0], MIN_FL_ENTRIES,
+ MAX_RX_BUFFERS)
+ || !in_range(t.fl_size[1], MIN_FL_ENTRIES,
+ MAX_RX_JUMBO_BUFFERS)
+ || !in_range(t.rspq_size, MIN_RSPQ_ENTRIES,
+ MAX_RSPQ_ENTRIES))
+ return -EINVAL;
+ if ((adapter->flags & FULL_INIT_DONE) &&
+ (t.rspq_size >= 0 || t.fl_size[0] >= 0 ||
+ t.fl_size[1] >= 0 || t.txq_size[0] >= 0 ||
+ t.txq_size[1] >= 0 || t.txq_size[2] >= 0 ||
+ t.polling >= 0 || t.cong_thres >= 0))
+ return -EBUSY;
+
+ q = &adapter->params.sge.qset[t.qset_idx];
+
+ if (t.rspq_size >= 0)
+ q->rspq_size = t.rspq_size;
+ if (t.fl_size[0] >= 0)
+ q->fl_size = t.fl_size[0];
+ if (t.fl_size[1] >= 0)
+ q->jumbo_size = t.fl_size[1];
+ if (t.txq_size[0] >= 0)
+ q->txq_size[0] = t.txq_size[0];
+ if (t.txq_size[1] >= 0)
+ q->txq_size[1] = t.txq_size[1];
+ if (t.txq_size[2] >= 0)
+ q->txq_size[2] = t.txq_size[2];
+ if (t.cong_thres >= 0)
+ q->cong_thres = t.cong_thres;
+ if (t.intr_lat >= 0) {
+ struct sge_qset *qs =
+ &adapter->sge.qs[t.qset_idx];
+
+ q->coalesce_usecs = t.intr_lat;
+ t3_update_qset_coalesce(qs, q);
+ }
+ if (t.polling >= 0) {
+ if (adapter->flags & USING_MSIX)
+ q->polling = t.polling;
+ else {
+ /* No polling with INTx for T3A */
+ if (adapter->params.rev == 0 &&
+ !(adapter->flags & USING_MSI))
+ t.polling = 0;
+
+ for (i = 0; i < SGE_QSETS; i++) {
+ q = &adapter->params.sge.
+ qset[i];
+ q->polling = t.polling;
+ }
+ }
+ }
+ break;
+ }
+ case CHELSIO_GET_QSET_PARAMS:{
+ struct qset_params *q;
+ struct ch_qset_params t;
+
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if (t.qset_idx >= SGE_QSETS)
+ return -EINVAL;
+
+ q = &adapter->params.sge.qset[t.qset_idx];
+ t.rspq_size = q->rspq_size;
+ t.txq_size[0] = q->txq_size[0];
+ t.txq_size[1] = q->txq_size[1];
+ t.txq_size[2] = q->txq_size[2];
+ t.fl_size[0] = q->fl_size;
+ t.fl_size[1] = q->jumbo_size;
+ t.polling = q->polling;
+ t.intr_lat = q->coalesce_usecs;
+ t.cong_thres = q->cong_thres;
+
+ if (copy_to_user(useraddr, &t, sizeof(t)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_QSET_NUM:{
+ struct ch_reg edata;
+ struct port_info *pi = netdev_priv(dev);
+ unsigned int i, first_qset = 0, other_qsets = 0;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (copy_from_user(&edata, useraddr, sizeof(edata)))
+ return -EFAULT;
+ if (edata.val < 1 ||
+ (edata.val > 1 && !(adapter->flags & USING_MSIX)))
+ return -EINVAL;
+
+ for_each_port(adapter, i)
+ if (adapter->port[i] && adapter->port[i] != dev)
+ other_qsets += adap2pinfo(adapter, i)->nqsets;
+
+ if (edata.val + other_qsets > SGE_QSETS)
+ return -EINVAL;
+
+ pi->nqsets = edata.val;
+
+ for_each_port(adapter, i)
+ if (adapter->port[i]) {
+ pi = adap2pinfo(adapter, i);
+ pi->first_qset = first_qset;
+ first_qset += pi->nqsets;
+ }
+ break;
+ }
+ case CHELSIO_GET_QSET_NUM:{
+ struct ch_reg edata;
+ struct port_info *pi = netdev_priv(dev);
+
+ edata.cmd = CHELSIO_GET_QSET_NUM;
+ edata.val = pi->nqsets;
+ if (copy_to_user(useraddr, &edata, sizeof(edata)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_LOAD_FW:{
+ u8 *fw_data;
+ struct ch_mem_range t;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+
+ fw_data = kmalloc(t.len, GFP_KERNEL);
+ if (!fw_data)
+ return -ENOMEM;
+
+ if (copy_from_user
+ (fw_data, useraddr + sizeof(t), t.len)) {
+ kfree(fw_data);
+ return -EFAULT;
+ }
+
+ ret = t3_load_fw(adapter, fw_data, t.len);
+ kfree(fw_data);
+ if (ret)
+ return ret;
+ break;
+ }
+ case CHELSIO_SETMTUTAB:{
+ struct ch_mtus m;
+ int i;
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (offload_running(adapter))
+ return -EBUSY;
+ if (copy_from_user(&m, useraddr, sizeof(m)))
+ return -EFAULT;
+ if (m.nmtus != NMTUS)
+ return -EINVAL;
+ if (m.mtus[0] < 81) /* accommodate SACK */
+ return -EINVAL;
+
+ /* MTUs must be in ascending order */
+ for (i = 1; i < NMTUS; ++i)
+ if (m.mtus[i] < m.mtus[i - 1])
+ return -EINVAL;
+
+ memcpy(adapter->params.mtus, m.mtus,
+ sizeof(adapter->params.mtus));
+ break;
+ }
+ case CHELSIO_GET_PM:{
+ struct tp_params *p = &adapter->params.tp;
+ struct ch_pm m = {.cmd = CHELSIO_GET_PM };
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ m.tx_pg_sz = p->tx_pg_size;
+ m.tx_num_pg = p->tx_num_pgs;
+ m.rx_pg_sz = p->rx_pg_size;
+ m.rx_num_pg = p->rx_num_pgs;
+ m.pm_total = p->pmtx_size + p->chan_rx_size * p->nchan;
+ if (copy_to_user(useraddr, &m, sizeof(m)))
+ return -EFAULT;
+ break;
+ }
+ case CHELSIO_SET_PM:{
+ struct ch_pm m;
+ struct tp_params *p = &adapter->params.tp;
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (adapter->flags & FULL_INIT_DONE)
+ return -EBUSY;
+ if (copy_from_user(&m, useraddr, sizeof(m)))
+ return -EFAULT;
+ if (!m.rx_pg_sz || (m.rx_pg_sz & (m.rx_pg_sz - 1)) ||
+ !m.tx_pg_sz || (m.tx_pg_sz & (m.tx_pg_sz - 1)))
+ return -EINVAL; /* not power of 2 */
+ if (!(m.rx_pg_sz & 0x14000))
+ return -EINVAL; /* not 16KB or 64KB */
+ if (!(m.tx_pg_sz & 0x1554000))
+ return -EINVAL;
+ if (m.tx_num_pg == -1)
+ m.tx_num_pg = p->tx_num_pgs;
+ if (m.rx_num_pg == -1)
+ m.rx_num_pg = p->rx_num_pgs;
+ if (m.tx_num_pg % 24 || m.rx_num_pg % 24)
+ return -EINVAL;
+ if (m.rx_num_pg * m.rx_pg_sz > p->chan_rx_size ||
+ m.tx_num_pg * m.tx_pg_sz > p->chan_tx_size)
+ return -EINVAL;
+ p->rx_pg_size = m.rx_pg_sz;
+ p->tx_pg_size = m.tx_pg_sz;
+ p->rx_num_pgs = m.rx_num_pg;
+ p->tx_num_pgs = m.tx_num_pg;
+ break;
+ }
+ case CHELSIO_GET_MEM:{
+ struct ch_mem_range t;
+ struct mc7 *mem;
+ u64 buf[32];
+
+ if (!is_offload(adapter))
+ return -EOPNOTSUPP;
+ if (!(adapter->flags & FULL_INIT_DONE))
+ return -EIO; /* need the memory controllers */
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+ if ((t.addr & 7) || (t.len & 7))
+ return -EINVAL;
+ if (t.mem_id == MEM_CM)
+ mem = &adapter->cm;
+ else if (t.mem_id == MEM_PMRX)
+ mem = &adapter->pmrx;
+ else if (t.mem_id == MEM_PMTX)
+ mem = &adapter->pmtx;
+ else
+ return -EINVAL;
+
+ /*
+ * Version scheme:
+ * bits 0..9: chip version
+ * bits 10..15: chip revision
+ */
+ t.version = 3 | (adapter->params.rev << 10);
+ if (copy_to_user(useraddr, &t, sizeof(t)))
+ return -EFAULT;
+
+ /*
+ * Read 256 bytes at a time as len can be large and we don't
+ * want to use huge intermediate buffers.
+ */
+ useraddr += sizeof(t); /* advance to start of buffer */
+ while (t.len) {
+ unsigned int chunk =
+ min_t(unsigned int, t.len, sizeof(buf));
+
+ ret =
+ t3_mc7_bd_read(mem, t.addr / 8, chunk / 8,
+ buf);
+ if (ret)
+ return ret;
+ if (copy_to_user(useraddr, buf, chunk))
+ return -EFAULT;
+ useraddr += chunk;
+ t.addr += chunk;
+ t.len -= chunk;
+ }
+ break;
+ }
+ case CHELSIO_SET_TRACE_FILTER:{
+ struct ch_trace t;
+ const struct trace_params *tp;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!offload_running(adapter))
+ return -EAGAIN;
+ if (copy_from_user(&t, useraddr, sizeof(t)))
+ return -EFAULT;
+
+ tp = (const struct trace_params *)&t.sip;
+ if (t.config_tx)
+ t3_config_trace_filter(adapter, tp, 0,
+ t.invert_match,
+ t.trace_tx);
+ if (t.config_rx)
+ t3_config_trace_filter(adapter, tp, 1,
+ t.invert_match,
+ t.trace_rx);
+ break;
+ }
+ case CHELSIO_SET_PKTSCHED:{
+ struct ch_pktsched_params p;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!adapter->open_device_map)
+ return -EAGAIN; /* uP and SGE must be running */
+ if (copy_from_user(&p, useraddr, sizeof(p)))
+ return -EFAULT;
+ send_pktsched_cmd(adapter, p.sched, p.idx, p.min, p.max,
+ p.binding);
+ break;
+
+ }
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+static int cxgb_ioctl(struct net_device *dev, struct ifreq *req, int cmd)
+{
+ int ret, mmd;
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+ struct mii_ioctl_data *data = if_mii(req);
+
+ switch (cmd) {
+ case SIOCGMIIPHY:
+ data->phy_id = pi->phy.addr;
+ /* FALLTHRU */
+ case SIOCGMIIREG:{
+ u32 val;
+ struct cphy *phy = &pi->phy;
+
+ if (!phy->mdio_read)
+ return -EOPNOTSUPP;
+ if (is_10G(adapter)) {
+ mmd = data->phy_id >> 8;
+ if (!mmd)
+ mmd = MDIO_DEV_PCS;
+ else if (mmd > MDIO_DEV_XGXS)
+ return -EINVAL;
+
+ ret =
+ phy->mdio_read(adapter, data->phy_id & 0x1f,
+ mmd, data->reg_num, &val);
+ } else
+ ret =
+ phy->mdio_read(adapter, data->phy_id & 0x1f,
+ 0, data->reg_num & 0x1f,
+ &val);
+ if (!ret)
+ data->val_out = val;
+ break;
+ }
+ case SIOCSMIIREG:{
+ struct cphy *phy = &pi->phy;
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ if (!phy->mdio_write)
+ return -EOPNOTSUPP;
+ if (is_10G(adapter)) {
+ mmd = data->phy_id >> 8;
+ if (!mmd)
+ mmd = MDIO_DEV_PCS;
+ else if (mmd > MDIO_DEV_XGXS)
+ return -EINVAL;
+
+ ret =
+ phy->mdio_write(adapter,
+ data->phy_id & 0x1f, mmd,
+ data->reg_num,
+ data->val_in);
+ } else
+ ret =
+ phy->mdio_write(adapter,
+ data->phy_id & 0x1f, 0,
+ data->reg_num & 0x1f,
+ data->val_in);
+ break;
+ }
+ case SIOCCHIOCTL:
+ return cxgb_extension_ioctl(dev, req->ifr_data);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static int cxgb_change_mtu(struct net_device *dev, int new_mtu)
+{
+ int ret;
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+
+ if (new_mtu < 81) /* accommodate SACK */
+ return -EINVAL;
+ if ((ret = t3_mac_set_mtu(&pi->mac, new_mtu)))
+ return ret;
+ dev->mtu = new_mtu;
+ init_port_mtus(adapter);
+ if (adapter->params.rev == 0 && offload_running(adapter))
+ t3_load_mtus(adapter, adapter->params.mtus,
+ adapter->params.a_wnd, adapter->params.b_wnd,
+ adapter->port[0]->mtu);
+ return 0;
+}
+
+static int cxgb_set_mac_addr(struct net_device *dev, void *p)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+ struct sockaddr *addr = p;
+
+ if (!is_valid_ether_addr(addr->sa_data))
+ return -EINVAL;
+
+ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
+ t3_mac_set_address(&pi->mac, 0, dev->dev_addr);
+ if (offload_running(adapter))
+ write_smt_entry(adapter, pi->port_id);
+ return 0;
+}
+
+/**
+ * t3_synchronize_rx - wait for current Rx processing on a port to complete
+ * @adap: the adapter
+ * @p: the port
+ *
+ * Ensures that current Rx processing on any of the queues associated with
+ * the given port completes before returning. We do this by acquiring and
+ * releasing the locks of the response queues associated with the port.
+ */
+static void t3_synchronize_rx(struct adapter *adap, const struct port_info *p)
+{
+ int i;
+
+ for (i = 0; i < p->nqsets; i++) {
+ struct sge_rspq *q = &adap->sge.qs[i + p->first_qset].rspq;
+
+ spin_lock_irq(&q->lock);
+ spin_unlock_irq(&q->lock);
+ }
+}
+
+static void vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
+{
+ struct adapter *adapter = dev->priv;
+ struct port_info *pi = netdev_priv(dev);
+
+ pi->vlan_grp = grp;
+ if (adapter->params.rev > 0)
+ t3_set_vlan_accel(adapter, 1 << pi->port_id, grp != NULL);
+ else {
+ /* single control for all ports */
+ unsigned int i, have_vlans = 0;
+ for_each_port(adapter, i)
+ have_vlans |= adap2pinfo(adapter, i)->vlan_grp != NULL;
+
+ t3_set_vlan_accel(adapter, 1, have_vlans);
+ }
+ t3_synchronize_rx(adapter, pi);
+}
+
+static void vlan_rx_kill_vid(struct net_device *dev, unsigned short vid)
+{
+ /* nothing */
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void cxgb_netpoll(struct net_device *dev)
+{
+ struct adapter *adapter = dev->priv;
+ struct sge_qset *qs = dev2qset(dev);
+
+ t3_intr_handler(adapter, qs->rspq.polling) (adapter->pdev->irq,
+ adapter);
+}
+#endif
+
+/*
+ * Periodic accumulation of MAC statistics.
+ */
+static void mac_stats_update(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i) {
+ struct net_device *dev = adapter->port[i];
+ struct port_info *p = netdev_priv(dev);
+
+ if (netif_running(dev)) {
+ spin_lock(&adapter->stats_lock);
+ t3_mac_update_stats(&p->mac);
+ spin_unlock(&adapter->stats_lock);
+ }
+ }
+}
+
+static void check_link_status(struct adapter *adapter)
+{
+ int i;
+
+ for_each_port(adapter, i) {
+ struct net_device *dev = adapter->port[i];
+ struct port_info *p = netdev_priv(dev);
+
+ if (!(p->port_type->caps & SUPPORTED_IRQ) && netif_running(dev))
+ t3_link_changed(adapter, i);
+ }
+}
+
+static void t3_adap_check_task(struct work_struct *work)
+{
+ struct adapter *adapter = container_of(work, struct adapter,
+ adap_check_task.work);
+ const struct adapter_params *p = &adapter->params;
+
+ adapter->check_task_cnt++;
+
+ /* Check link status for PHYs without interrupts */
+ if (p->linkpoll_period)
+ check_link_status(adapter);
+
+ /* Accumulate MAC stats if needed */
+ if (!p->linkpoll_period ||
+ (adapter->check_task_cnt * p->linkpoll_period) / 10 >=
+ p->stats_update_period) {
+ mac_stats_update(adapter);
+ adapter->check_task_cnt = 0;
+ }
+
+ /* Schedule the next check update if any port is active. */
+ spin_lock(&adapter->work_lock);
+ if (adapter->open_device_map & PORT_MASK)
+ schedule_chk_task(adapter);
+ spin_unlock(&adapter->work_lock);
+}
+
+/*
+ * Processes external (PHY) interrupts in process context.
+ */
+static void ext_intr_task(struct work_struct *work)
+{
+ struct adapter *adapter = container_of(work, struct adapter,
+ ext_intr_handler_task);
+
+ t3_phy_intr_handler(adapter);
+
+ /* Now reenable external interrupts */
+ spin_lock_irq(&adapter->work_lock);
+ if (adapter->slow_intr_mask) {
+ adapter->slow_intr_mask |= F_T3DBG;
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, F_T3DBG);
+ t3_write_reg(adapter, A_PL_INT_ENABLE0,
+ adapter->slow_intr_mask);
+ }
+ spin_unlock_irq(&adapter->work_lock);
+}
+
+/*
+ * Interrupt-context handler for external (PHY) interrupts.
+ */
+void t3_os_ext_intr_handler(struct adapter *adapter)
+{
+ /*
+ * Schedule a task to handle external interrupts as they may be slow
+ * and we use a mutex to protect MDIO registers. We disable PHY
+ * interrupts in the meantime and let the task reenable them when
+ * it's done.
+ */
+ spin_lock(&adapter->work_lock);
+ if (adapter->slow_intr_mask) {
+ adapter->slow_intr_mask &= ~F_T3DBG;
+ t3_write_reg(adapter, A_PL_INT_ENABLE0,
+ adapter->slow_intr_mask);
+ queue_work(cxgb3_wq, &adapter->ext_intr_handler_task);
+ }
+ spin_unlock(&adapter->work_lock);
+}
+
+void t3_fatal_err(struct adapter *adapter)
+{
+ unsigned int fw_status[4];
+
+ if (adapter->flags & FULL_INIT_DONE) {
+ t3_sge_stop(adapter);
+ t3_intr_disable(adapter);
+ }
+ CH_ALERT(adapter, "encountered fatal error, operation suspended\n");
+ if (!t3_cim_ctl_blk_read(adapter, 0xa0, 4, fw_status))
+ CH_ALERT(adapter, "FW status: 0x%x, 0x%x, 0x%x, 0x%x\n",
+ fw_status[0], fw_status[1],
+ fw_status[2], fw_status[3]);
+
+}
+
+static int __devinit cxgb_enable_msix(struct adapter *adap)
+{
+ struct msix_entry entries[SGE_QSETS + 1];
+ int i, err;
+
+ for (i = 0; i < ARRAY_SIZE(entries); ++i)
+ entries[i].entry = i;
+
+ err = pci_enable_msix(adap->pdev, entries, ARRAY_SIZE(entries));
+ if (!err) {
+ for (i = 0; i < ARRAY_SIZE(entries); ++i)
+ adap->msix_info[i].vec = entries[i].vector;
+ } else if (err > 0)
+ dev_info(&adap->pdev->dev,
+ "only %d MSI-X vectors left, not using MSI-X\n", err);
+ return err;
+}
+
+static void __devinit print_port_info(struct adapter *adap,
+ const struct adapter_info *ai)
+{
+ static const char *pci_variant[] = {
+ "PCI", "PCI-X", "PCI-X ECC", "PCI-X 266", "PCI Express"
+ };
+
+ int i;
+ char buf[80];
+
+ if (is_pcie(adap))
+ snprintf(buf, sizeof(buf), "%s x%d",
+ pci_variant[adap->params.pci.variant],
+ adap->params.pci.width);
+ else
+ snprintf(buf, sizeof(buf), "%s %dMHz/%d-bit",
+ pci_variant[adap->params.pci.variant],
+ adap->params.pci.speed, adap->params.pci.width);
+
+ for_each_port(adap, i) {
+ struct net_device *dev = adap->port[i];
+ const struct port_info *pi = netdev_priv(dev);
+
+ if (!test_bit(i, &adap->registered_device_map))
+ continue;
+ printk(KERN_INFO "%s: %s %s RNIC (rev %d) %s%s\n",
+ dev->name, ai->desc, pi->port_type->desc,
+ adap->params.rev, buf,
+ (adap->flags & USING_MSIX) ? " MSI-X" :
+ (adap->flags & USING_MSI) ? " MSI" : "");
+ if (adap->name == dev->name && adap->params.vpd.mclk)
+ printk(KERN_INFO "%s: %uMB CM, %uMB PMTX, %uMB PMRX\n",
+ adap->name, t3_mc7_size(&adap->cm) >> 20,
+ t3_mc7_size(&adap->pmtx) >> 20,
+ t3_mc7_size(&adap->pmrx) >> 20);
+ }
+}
+
+static int __devinit init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ static int version_printed;
+
+ int i, err, pci_using_dac = 0;
+ unsigned long mmio_start, mmio_len;
+ const struct adapter_info *ai;
+ struct adapter *adapter = NULL;
+ struct port_info *pi;
+
+ if (!version_printed) {
+ printk(KERN_INFO "%s - version %s\n", DRV_DESC, DRV_VERSION);
+ ++version_printed;
+ }
+
+ if (!cxgb3_wq) {
+ cxgb3_wq = create_singlethread_workqueue(DRV_NAME);
+ if (!cxgb3_wq) {
+ printk(KERN_ERR DRV_NAME
+ ": cannot initialize work queue\n");
+ return -ENOMEM;
+ }
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ /* Just info, some other driver may have claimed the device. */
+ dev_info(&pdev->dev, "cannot obtain PCI resources\n");
+ return err;
+ }
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
+ goto out_release_regions;
+ }
+
+ if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) {
+ pci_using_dac = 1;
+ err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
+ if (err) {
+ dev_err(&pdev->dev, "unable to obtain 64-bit DMA for "
+ "coherent allocations\n");
+ goto out_disable_device;
+ }
+ } else if ((err = pci_set_dma_mask(pdev, DMA_32BIT_MASK)) != 0) {
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
+ goto out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ mmio_start = pci_resource_start(pdev, 0);
+ mmio_len = pci_resource_len(pdev, 0);
+ ai = t3_get_adapter_info(ent->driver_data);
+
+ adapter = kzalloc(sizeof(*adapter), GFP_KERNEL);
+ if (!adapter) {
+ err = -ENOMEM;
+ goto out_disable_device;
+ }
+
+ adapter->regs = ioremap_nocache(mmio_start, mmio_len);
+ if (!adapter->regs) {
+ dev_err(&pdev->dev, "cannot map device registers\n");
+ err = -ENOMEM;
+ goto out_free_adapter;
+ }
+
+ adapter->pdev = pdev;
+ adapter->name = pci_name(pdev);
+ adapter->msg_enable = dflt_msg_enable;
+ adapter->mmio_len = mmio_len;
+
+ mutex_init(&adapter->mdio_lock);
+ spin_lock_init(&adapter->work_lock);
+ spin_lock_init(&adapter->stats_lock);
+
+ INIT_LIST_HEAD(&adapter->adapter_list);
+ INIT_WORK(&adapter->ext_intr_handler_task, ext_intr_task);
+ INIT_DELAYED_WORK(&adapter->adap_check_task, t3_adap_check_task);
+
+ for (i = 0; i < ai->nports; ++i) {
+ struct net_device *netdev;
+
+ netdev = alloc_etherdev(sizeof(struct port_info));
+ if (!netdev) {
+ err = -ENOMEM;
+ goto out_free_dev;
+ }
+
+ SET_MODULE_OWNER(netdev);
+ SET_NETDEV_DEV(netdev, &pdev->dev);
+
+ adapter->port[i] = netdev;
+ pi = netdev_priv(netdev);
+ pi->rx_csum_offload = 1;
+ pi->nqsets = 1;
+ pi->first_qset = i;
+ pi->activity = 0;
+ pi->port_id = i;
+ netif_carrier_off(netdev);
+ netdev->irq = pdev->irq;
+ netdev->mem_start = mmio_start;
+ netdev->mem_end = mmio_start + mmio_len - 1;
+ netdev->priv = adapter;
+ netdev->features |= NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO;
+ netdev->features |= NETIF_F_LLTX;
+ if (pci_using_dac)
+ netdev->features |= NETIF_F_HIGHDMA;
+
+ netdev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
+ netdev->vlan_rx_register = vlan_rx_register;
+ netdev->vlan_rx_kill_vid = vlan_rx_kill_vid;
+
+ netdev->open = cxgb_open;
+ netdev->stop = cxgb_close;
+ netdev->hard_start_xmit = t3_eth_xmit;
+ netdev->get_stats = cxgb_get_stats;
+ netdev->set_multicast_list = cxgb_set_rxmode;
+ netdev->do_ioctl = cxgb_ioctl;
+ netdev->change_mtu = cxgb_change_mtu;
+ netdev->set_mac_address = cxgb_set_mac_addr;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ netdev->poll_controller = cxgb_netpoll;
+#endif
+ netdev->weight = 64;
+
+ SET_ETHTOOL_OPS(netdev, &cxgb_ethtool_ops);
+ }
+
+ pci_set_drvdata(pdev, adapter->port[0]);
+ if (t3_prep_adapter(adapter, ai, 1) < 0) {
+ err = -ENODEV;
+ goto out_free_dev;
+ }
+
+ /*
+ * The card is now ready to go. If any errors occur during device
+ * registration we do not fail the whole card but rather proceed only
+ * with the ports we manage to register successfully. However we must
+ * register at least one net device.
+ */
+ for_each_port(adapter, i) {
+ err = register_netdev(adapter->port[i]);
+ if (err)
+ dev_warn(&pdev->dev,
+ "cannot register net device %s, skipping\n",
+ adapter->port[i]->name);
+ else {
+ /*
+ * Change the name we use for messages to the name of
+ * the first successfully registered interface.
+ */
+ if (!adapter->registered_device_map)
+ adapter->name = adapter->port[i]->name;
+
+ __set_bit(i, &adapter->registered_device_map);
+ }
+ }
+ if (!adapter->registered_device_map) {
+ dev_err(&pdev->dev, "could not register any net devices\n");
+ goto out_free_dev;
+ }
+
+ /* Driver's ready. Reflect it on LEDs */
+ t3_led_ready(adapter);
+
+ if (is_offload(adapter)) {
+ __set_bit(OFFLOAD_DEVMAP_BIT, &adapter->registered_device_map);
+ cxgb3_adapter_ofld(adapter);
+ }
+
+ /* See what interrupts we'll be using */
+ if (msi > 1 && cxgb_enable_msix(adapter) == 0)
+ adapter->flags |= USING_MSIX;
+ else if (msi > 0 && pci_enable_msi(pdev) == 0)
+ adapter->flags |= USING_MSI;
+
+ err = sysfs_create_group(&adapter->port[0]->class_dev.kobj,
+ &cxgb3_attr_group);
+
+ print_port_info(adapter, ai);
+ return 0;
+
+out_free_dev:
+ iounmap(adapter->regs);
+ for (i = ai->nports - 1; i >= 0; --i)
+ if (adapter->port[i])
+ free_netdev(adapter->port[i]);
+
+out_free_adapter:
+ kfree(adapter);
+
+out_disable_device:
+ pci_disable_device(pdev);
+out_release_regions:
+ pci_release_regions(pdev);
+ pci_set_drvdata(pdev, NULL);
+ return err;
+}
+
+static void __devexit remove_one(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+
+ if (dev) {
+ int i;
+ struct adapter *adapter = dev->priv;
+
+ t3_sge_stop(adapter);
+ sysfs_remove_group(&adapter->port[0]->class_dev.kobj,
+ &cxgb3_attr_group);
+
+ for_each_port(adapter, i)
+ if (test_bit(i, &adapter->registered_device_map))
+ unregister_netdev(adapter->port[i]);
+
+ if (is_offload(adapter)) {
+ cxgb3_adapter_unofld(adapter);
+ if (test_bit(OFFLOAD_DEVMAP_BIT,
+ &adapter->open_device_map))
+ offload_close(&adapter->tdev);
+ }
+
+ t3_free_sge_resources(adapter);
+ cxgb_disable_msi(adapter);
+
+ for (i = 0; i < ARRAY_SIZE(adapter->dummy_netdev); i++)
+ if (adapter->dummy_netdev[i]) {
+ free_netdev(adapter->dummy_netdev[i]);
+ adapter->dummy_netdev[i] = NULL;
+ }
+
+ for_each_port(adapter, i)
+ if (adapter->port[i])
+ free_netdev(adapter->port[i]);
+
+ iounmap(adapter->regs);
+ kfree(adapter);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ }
+}
+
+static struct pci_driver driver = {
+ .name = DRV_NAME,
+ .id_table = cxgb3_pci_tbl,
+ .probe = init_one,
+ .remove = __devexit_p(remove_one),
+};
+
+static int __init cxgb3_init_module(void)
+{
+ int ret;
+
+ cxgb3_offload_init();
+
+ ret = pci_register_driver(&driver);
+ return ret;
+}
+
+static void __exit cxgb3_cleanup_module(void)
+{
+ pci_unregister_driver(&driver);
+ if (cxgb3_wq)
+ destroy_workqueue(cxgb3_wq);
+}
+
+module_init(cxgb3_init_module);
+module_exit(cxgb3_cleanup_module);
--- /dev/null
+/*
+ * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/list.h>
+#include <net/neighbour.h>
+#include <linux/notifier.h>
+#include <asm/atomic.h>
+#include <linux/proc_fs.h>
+#include <linux/if_vlan.h>
+#include <net/netevent.h>
+#include <linux/highmem.h>
+#include <linux/vmalloc.h>
+
+#include "common.h"
+#include "regs.h"
+#include "cxgb3_ioctl.h"
+#include "cxgb3_ctl_defs.h"
+#include "cxgb3_defs.h"
+#include "l2t.h"
+#include "firmware_exports.h"
+#include "cxgb3_offload.h"
+
+static LIST_HEAD(client_list);
+static LIST_HEAD(ofld_dev_list);
+static DEFINE_MUTEX(cxgb3_db_lock);
+
+static DEFINE_RWLOCK(adapter_list_lock);
+static LIST_HEAD(adapter_list);
+
+static const unsigned int MAX_ATIDS = 64 * 1024;
+static const unsigned int ATID_BASE = 0x100000;
+
+static inline int offload_activated(struct t3cdev *tdev)
+{
+ const struct adapter *adapter = tdev2adap(tdev);
+
+ return (test_bit(OFFLOAD_DEVMAP_BIT, &adapter->open_device_map));
+}
+
+/**
+ * cxgb3_register_client - register an offload client
+ * @client: the client
+ *
+ * Add the client to the client list,
+ * and call backs the client for each activated offload device
+ */
+void cxgb3_register_client(struct cxgb3_client *client)
+{
+ struct t3cdev *tdev;
+
+ mutex_lock(&cxgb3_db_lock);
+ list_add_tail(&client->client_list, &client_list);
+
+ if (client->add) {
+ list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) {
+ if (offload_activated(tdev))
+ client->add(tdev);
+ }
+ }
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+EXPORT_SYMBOL(cxgb3_register_client);
+
+/**
+ * cxgb3_unregister_client - unregister an offload client
+ * @client: the client
+ *
+ * Remove the client to the client list,
+ * and call backs the client for each activated offload device.
+ */
+void cxgb3_unregister_client(struct cxgb3_client *client)
+{
+ struct t3cdev *tdev;
+
+ mutex_lock(&cxgb3_db_lock);
+ list_del(&client->client_list);
+
+ if (client->remove) {
+ list_for_each_entry(tdev, &ofld_dev_list, ofld_dev_list) {
+ if (offload_activated(tdev))
+ client->remove(tdev);
+ }
+ }
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+EXPORT_SYMBOL(cxgb3_unregister_client);
+
+/**
+ * cxgb3_add_clients - activate registered clients for an offload device
+ * @tdev: the offload device
+ *
+ * Call backs all registered clients once a offload device is activated
+ */
+void cxgb3_add_clients(struct t3cdev *tdev)
+{
+ struct cxgb3_client *client;
+
+ mutex_lock(&cxgb3_db_lock);
+ list_for_each_entry(client, &client_list, client_list) {
+ if (client->add)
+ client->add(tdev);
+ }
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+/**
+ * cxgb3_remove_clients - deactivates registered clients
+ * for an offload device
+ * @tdev: the offload device
+ *
+ * Call backs all registered clients once a offload device is deactivated
+ */
+void cxgb3_remove_clients(struct t3cdev *tdev)
+{
+ struct cxgb3_client *client;
+
+ mutex_lock(&cxgb3_db_lock);
+ list_for_each_entry(client, &client_list, client_list) {
+ if (client->remove)
+ client->remove(tdev);
+ }
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+static struct net_device *get_iff_from_mac(struct adapter *adapter,
+ const unsigned char *mac,
+ unsigned int vlan)
+{
+ int i;
+
+ for_each_port(adapter, i) {
+ const struct vlan_group *grp;
+ struct net_device *dev = adapter->port[i];
+ const struct port_info *p = netdev_priv(dev);
+
+ if (!memcmp(dev->dev_addr, mac, ETH_ALEN)) {
+ if (vlan && vlan != VLAN_VID_MASK) {
+ grp = p->vlan_grp;
+ dev = grp ? grp->vlan_devices[vlan] : NULL;
+ } else
+ while (dev->master)
+ dev = dev->master;
+ return dev;
+ }
+ }
+ return NULL;
+}
+
+static int cxgb_ulp_iscsi_ctl(struct adapter *adapter, unsigned int req,
+ void *data)
+{
+ int ret = 0;
+ struct ulp_iscsi_info *uiip = data;
+
+ switch (req) {
+ case ULP_ISCSI_GET_PARAMS:
+ uiip->pdev = adapter->pdev;
+ uiip->llimit = t3_read_reg(adapter, A_ULPRX_ISCSI_LLIMIT);
+ uiip->ulimit = t3_read_reg(adapter, A_ULPRX_ISCSI_ULIMIT);
+ uiip->tagmask = t3_read_reg(adapter, A_ULPRX_ISCSI_TAGMASK);
+ /*
+ * On tx, the iscsi pdu has to be <= tx page size and has to
+ * fit into the Tx PM FIFO.
+ */
+ uiip->max_txsz = min(adapter->params.tp.tx_pg_size,
+ t3_read_reg(adapter, A_PM1_TX_CFG) >> 17);
+ /* on rx, the iscsi pdu has to be < rx page size and the
+ whole pdu + cpl headers has to fit into one sge buffer */
+ uiip->max_rxsz = min_t(unsigned int,
+ adapter->params.tp.rx_pg_size,
+ (adapter->sge.qs[0].fl[1].buf_size -
+ sizeof(struct cpl_rx_data) * 2 -
+ sizeof(struct cpl_rx_data_ddp)));
+ break;
+ case ULP_ISCSI_SET_PARAMS:
+ t3_write_reg(adapter, A_ULPRX_ISCSI_TAGMASK, uiip->tagmask);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+/* Response queue used for RDMA events. */
+#define ASYNC_NOTIF_RSPQ 0
+
+static int cxgb_rdma_ctl(struct adapter *adapter, unsigned int req, void *data)
+{
+ int ret = 0;
+
+ switch (req) {
+ case RDMA_GET_PARAMS:{
+ struct rdma_info *req = data;
+ struct pci_dev *pdev = adapter->pdev;
+
+ req->udbell_physbase = pci_resource_start(pdev, 2);
+ req->udbell_len = pci_resource_len(pdev, 2);
+ req->tpt_base =
+ t3_read_reg(adapter, A_ULPTX_TPT_LLIMIT);
+ req->tpt_top = t3_read_reg(adapter, A_ULPTX_TPT_ULIMIT);
+ req->pbl_base =
+ t3_read_reg(adapter, A_ULPTX_PBL_LLIMIT);
+ req->pbl_top = t3_read_reg(adapter, A_ULPTX_PBL_ULIMIT);
+ req->rqt_base = t3_read_reg(adapter, A_ULPRX_RQ_LLIMIT);
+ req->rqt_top = t3_read_reg(adapter, A_ULPRX_RQ_ULIMIT);
+ req->kdb_addr = adapter->regs + A_SG_KDOORBELL;
+ req->pdev = pdev;
+ break;
+ }
+ case RDMA_CQ_OP:{
+ unsigned long flags;
+ struct rdma_cq_op *req = data;
+
+ /* may be called in any context */
+ spin_lock_irqsave(&adapter->sge.reg_lock, flags);
+ ret = t3_sge_cqcntxt_op(adapter, req->id, req->op,
+ req->credits);
+ spin_unlock_irqrestore(&adapter->sge.reg_lock, flags);
+ break;
+ }
+ case RDMA_GET_MEM:{
+ struct ch_mem_range *t = data;
+ struct mc7 *mem;
+
+ if ((t->addr & 7) || (t->len & 7))
+ return -EINVAL;
+ if (t->mem_id == MEM_CM)
+ mem = &adapter->cm;
+ else if (t->mem_id == MEM_PMRX)
+ mem = &adapter->pmrx;
+ else if (t->mem_id == MEM_PMTX)
+ mem = &adapter->pmtx;
+ else
+ return -EINVAL;
+
+ ret =
+ t3_mc7_bd_read(mem, t->addr / 8, t->len / 8,
+ (u64 *) t->buf);
+ if (ret)
+ return ret;
+ break;
+ }
+ case RDMA_CQ_SETUP:{
+ struct rdma_cq_setup *req = data;
+
+ spin_lock_irq(&adapter->sge.reg_lock);
+ ret =
+ t3_sge_init_cqcntxt(adapter, req->id,
+ req->base_addr, req->size,
+ ASYNC_NOTIF_RSPQ,
+ req->ovfl_mode, req->credits,
+ req->credit_thres);
+ spin_unlock_irq(&adapter->sge.reg_lock);
+ break;
+ }
+ case RDMA_CQ_DISABLE:
+ spin_lock_irq(&adapter->sge.reg_lock);
+ ret = t3_sge_disable_cqcntxt(adapter, *(unsigned int *)data);
+ spin_unlock_irq(&adapter->sge.reg_lock);
+ break;
+ case RDMA_CTRL_QP_SETUP:{
+ struct rdma_ctrlqp_setup *req = data;
+
+ spin_lock_irq(&adapter->sge.reg_lock);
+ ret = t3_sge_init_ecntxt(adapter, FW_RI_SGEEC_START, 0,
+ SGE_CNTXT_RDMA,
+ ASYNC_NOTIF_RSPQ,
+ req->base_addr, req->size,
+ FW_RI_TID_START, 1, 0);
+ spin_unlock_irq(&adapter->sge.reg_lock);
+ break;
+ }
+ default:
+ ret = -EOPNOTSUPP;
+ }
+ return ret;
+}
+
+static int cxgb_offload_ctl(struct t3cdev *tdev, unsigned int req, void *data)
+{
+ struct adapter *adapter = tdev2adap(tdev);
+ struct tid_range *tid;
+ struct mtutab *mtup;
+ struct iff_mac *iffmacp;
+ struct ddp_params *ddpp;
+ struct adap_ports *ports;
+ int i;
+
+ switch (req) {
+ case GET_MAX_OUTSTANDING_WR:
+ *(unsigned int *)data = FW_WR_NUM;
+ break;
+ case GET_WR_LEN:
+ *(unsigned int *)data = WR_FLITS;
+ break;
+ case GET_TX_MAX_CHUNK:
+ *(unsigned int *)data = 1 << 20; /* 1MB */
+ break;
+ case GET_TID_RANGE:
+ tid = data;
+ tid->num = t3_mc5_size(&adapter->mc5) -
+ adapter->params.mc5.nroutes -
+ adapter->params.mc5.nfilters - adapter->params.mc5.nservers;
+ tid->base = 0;
+ break;
+ case GET_STID_RANGE:
+ tid = data;
+ tid->num = adapter->params.mc5.nservers;
+ tid->base = t3_mc5_size(&adapter->mc5) - tid->num -
+ adapter->params.mc5.nfilters - adapter->params.mc5.nroutes;
+ break;
+ case GET_L2T_CAPACITY:
+ *(unsigned int *)data = 2048;
+ break;
+ case GET_MTUS:
+ mtup = data;
+ mtup->size = NMTUS;
+ mtup->mtus = adapter->params.mtus;
+ break;
+ case GET_IFF_FROM_MAC:
+ iffmacp = data;
+ iffmacp->dev = get_iff_from_mac(adapter, iffmacp->mac_addr,
+ iffmacp->vlan_tag &
+ VLAN_VID_MASK);
+ break;
+ case GET_DDP_PARAMS:
+ ddpp = data;
+ ddpp->llimit = t3_read_reg(adapter, A_ULPRX_TDDP_LLIMIT);
+ ddpp->ulimit = t3_read_reg(adapter, A_ULPRX_TDDP_ULIMIT);
+ ddpp->tag_mask = t3_read_reg(adapter, A_ULPRX_TDDP_TAGMASK);
+ break;
+ case GET_PORTS:
+ ports = data;
+ ports->nports = adapter->params.nports;
+ for_each_port(adapter, i)
+ ports->lldevs[i] = adapter->port[i];
+ break;
+ case ULP_ISCSI_GET_PARAMS:
+ case ULP_ISCSI_SET_PARAMS:
+ if (!offload_running(adapter))
+ return -EAGAIN;
+ return cxgb_ulp_iscsi_ctl(adapter, req, data);
+ case RDMA_GET_PARAMS:
+ case RDMA_CQ_OP:
+ case RDMA_CQ_SETUP:
+ case RDMA_CQ_DISABLE:
+ case RDMA_CTRL_QP_SETUP:
+ case RDMA_GET_MEM:
+ if (!offload_running(adapter))
+ return -EAGAIN;
+ return cxgb_rdma_ctl(adapter, req, data);
+ default:
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+
+/*
+ * Dummy handler for Rx offload packets in case we get an offload packet before
+ * proper processing is setup. This complains and drops the packet as it isn't
+ * normal to get offload packets at this stage.
+ */
+static int rx_offload_blackhole(struct t3cdev *dev, struct sk_buff **skbs,
+ int n)
+{
+ CH_ERR(tdev2adap(dev), "%d unexpected offload packets, first data %u\n",
+ n, ntohl(*(u32 *)skbs[0]->data));
+ while (n--)
+ dev_kfree_skb_any(skbs[n]);
+ return 0;
+}
+
+static void dummy_neigh_update(struct t3cdev *dev, struct neighbour *neigh)
+{
+}
+
+void cxgb3_set_dummy_ops(struct t3cdev *dev)
+{
+ dev->recv = rx_offload_blackhole;
+ dev->neigh_update = dummy_neigh_update;
+}
+
+/*
+ * Free an active-open TID.
+ */
+void *cxgb3_free_atid(struct t3cdev *tdev, int atid)
+{
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+ union active_open_entry *p = atid2entry(t, atid);
+ void *ctx = p->t3c_tid.ctx;
+
+ spin_lock_bh(&t->atid_lock);
+ p->next = t->afree;
+ t->afree = p;
+ t->atids_in_use--;
+ spin_unlock_bh(&t->atid_lock);
+
+ return ctx;
+}
+
+EXPORT_SYMBOL(cxgb3_free_atid);
+
+/*
+ * Free a server TID and return it to the free pool.
+ */
+void cxgb3_free_stid(struct t3cdev *tdev, int stid)
+{
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+ union listen_entry *p = stid2entry(t, stid);
+
+ spin_lock_bh(&t->stid_lock);
+ p->next = t->sfree;
+ t->sfree = p;
+ t->stids_in_use--;
+ spin_unlock_bh(&t->stid_lock);
+}
+
+EXPORT_SYMBOL(cxgb3_free_stid);
+
+void cxgb3_insert_tid(struct t3cdev *tdev, struct cxgb3_client *client,
+ void *ctx, unsigned int tid)
+{
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+
+ t->tid_tab[tid].client = client;
+ t->tid_tab[tid].ctx = ctx;
+ atomic_inc(&t->tids_in_use);
+}
+
+EXPORT_SYMBOL(cxgb3_insert_tid);
+
+/*
+ * Populate a TID_RELEASE WR. The skb must be already propely sized.
+ */
+static inline void mk_tid_release(struct sk_buff *skb, unsigned int tid)
+{
+ struct cpl_tid_release *req;
+
+ skb->priority = CPL_PRIORITY_SETUP;
+ req = (struct cpl_tid_release *)__skb_put(skb, sizeof(*req));
+ req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_TID_RELEASE, tid));
+}
+
+static void t3_process_tid_release_list(struct work_struct *work)
+{
+ struct t3c_data *td = container_of(work, struct t3c_data,
+ tid_release_task);
+ struct sk_buff *skb;
+ struct t3cdev *tdev = td->dev;
+
+
+ spin_lock_bh(&td->tid_release_lock);
+ while (td->tid_release_list) {
+ struct t3c_tid_entry *p = td->tid_release_list;
+
+ td->tid_release_list = (struct t3c_tid_entry *)p->ctx;
+ spin_unlock_bh(&td->tid_release_lock);
+
+ skb = alloc_skb(sizeof(struct cpl_tid_release),
+ GFP_KERNEL | __GFP_NOFAIL);
+ mk_tid_release(skb, p - td->tid_maps.tid_tab);
+ cxgb3_ofld_send(tdev, skb);
+ p->ctx = NULL;
+ spin_lock_bh(&td->tid_release_lock);
+ }
+ spin_unlock_bh(&td->tid_release_lock);
+}
+
+/* use ctx as a next pointer in the tid release list */
+void cxgb3_queue_tid_release(struct t3cdev *tdev, unsigned int tid)
+{
+ struct t3c_data *td = T3C_DATA(tdev);
+ struct t3c_tid_entry *p = &td->tid_maps.tid_tab[tid];
+
+ spin_lock_bh(&td->tid_release_lock);
+ p->ctx = (void *)td->tid_release_list;
+ td->tid_release_list = p;
+ if (!p->ctx)
+ schedule_work(&td->tid_release_task);
+ spin_unlock_bh(&td->tid_release_lock);
+}
+
+EXPORT_SYMBOL(cxgb3_queue_tid_release);
+
+/*
+ * Remove a tid from the TID table. A client may defer processing its last
+ * CPL message if it is locked at the time it arrives, and while the message
+ * sits in the client's backlog the TID may be reused for another connection.
+ * To handle this we atomically switch the TID association if it still points
+ * to the original client context.
+ */
+void cxgb3_remove_tid(struct t3cdev *tdev, void *ctx, unsigned int tid)
+{
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+
+ BUG_ON(tid >= t->ntids);
+ if (tdev->type == T3A)
+ (void)cmpxchg(&t->tid_tab[tid].ctx, ctx, NULL);
+ else {
+ struct sk_buff *skb;
+
+ skb = alloc_skb(sizeof(struct cpl_tid_release), GFP_ATOMIC);
+ if (likely(skb)) {
+ mk_tid_release(skb, tid);
+ cxgb3_ofld_send(tdev, skb);
+ t->tid_tab[tid].ctx = NULL;
+ } else
+ cxgb3_queue_tid_release(tdev, tid);
+ }
+ atomic_dec(&t->tids_in_use);
+}
+
+EXPORT_SYMBOL(cxgb3_remove_tid);
+
+int cxgb3_alloc_atid(struct t3cdev *tdev, struct cxgb3_client *client,
+ void *ctx)
+{
+ int atid = -1;
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+
+ spin_lock_bh(&t->atid_lock);
+ if (t->afree) {
+ union active_open_entry *p = t->afree;
+
+ atid = (p - t->atid_tab) + t->atid_base;
+ t->afree = p->next;
+ p->t3c_tid.ctx = ctx;
+ p->t3c_tid.client = client;
+ t->atids_in_use++;
+ }
+ spin_unlock_bh(&t->atid_lock);
+ return atid;
+}
+
+EXPORT_SYMBOL(cxgb3_alloc_atid);
+
+int cxgb3_alloc_stid(struct t3cdev *tdev, struct cxgb3_client *client,
+ void *ctx)
+{
+ int stid = -1;
+ struct tid_info *t = &(T3C_DATA(tdev))->tid_maps;
+
+ spin_lock_bh(&t->stid_lock);
+ if (t->sfree) {
+ union listen_entry *p = t->sfree;
+
+ stid = (p - t->stid_tab) + t->stid_base;
+ t->sfree = p->next;
+ p->t3c_tid.ctx = ctx;
+ p->t3c_tid.client = client;
+ t->stids_in_use++;
+ }
+ spin_unlock_bh(&t->stid_lock);
+ return stid;
+}
+
+EXPORT_SYMBOL(cxgb3_alloc_stid);
+
+static int do_smt_write_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_smt_write_rpl *rpl = cplhdr(skb);
+
+ if (rpl->status != CPL_ERR_NONE)
+ printk(KERN_ERR
+ "Unexpected SMT_WRITE_RPL status %u for entry %u\n",
+ rpl->status, GET_TID(rpl));
+
+ return CPL_RET_BUF_DONE;
+}
+
+static int do_l2t_write_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_l2t_write_rpl *rpl = cplhdr(skb);
+
+ if (rpl->status != CPL_ERR_NONE)
+ printk(KERN_ERR
+ "Unexpected L2T_WRITE_RPL status %u for entry %u\n",
+ rpl->status, GET_TID(rpl));
+
+ return CPL_RET_BUF_DONE;
+}
+
+static int do_act_open_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_act_open_rpl *rpl = cplhdr(skb);
+ unsigned int atid = G_TID(ntohl(rpl->atid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid);
+ if (t3c_tid->ctx && t3c_tid->client && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[CPL_ACT_OPEN_RPL]) {
+ return t3c_tid->client->handlers[CPL_ACT_OPEN_RPL] (dev, skb,
+ t3c_tid->
+ ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, CPL_ACT_OPEN_RPL);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int do_stid_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ union opcode_tid *p = cplhdr(skb);
+ unsigned int stid = G_TID(ntohl(p->opcode_tid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[p->opcode]) {
+ return t3c_tid->client->handlers[p->opcode] (dev, skb,
+ t3c_tid->ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, p->opcode);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int do_hwtid_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ union opcode_tid *p = cplhdr(skb);
+ unsigned int hwtid = G_TID(ntohl(p->opcode_tid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[p->opcode]) {
+ return t3c_tid->client->handlers[p->opcode]
+ (dev, skb, t3c_tid->ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, p->opcode);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int do_cr(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_pass_accept_req *req = cplhdr(skb);
+ unsigned int stid = G_PASS_OPEN_TID(ntohl(req->tos_tid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_stid(&(T3C_DATA(dev))->tid_maps, stid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ]) {
+ return t3c_tid->client->handlers[CPL_PASS_ACCEPT_REQ]
+ (dev, skb, t3c_tid->ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, CPL_PASS_ACCEPT_REQ);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int do_abort_req_rss(struct t3cdev *dev, struct sk_buff *skb)
+{
+ union opcode_tid *p = cplhdr(skb);
+ unsigned int hwtid = G_TID(ntohl(p->opcode_tid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[p->opcode]) {
+ return t3c_tid->client->handlers[p->opcode]
+ (dev, skb, t3c_tid->ctx);
+ } else {
+ struct cpl_abort_req_rss *req = cplhdr(skb);
+ struct cpl_abort_rpl *rpl;
+
+ struct sk_buff *skb =
+ alloc_skb(sizeof(struct cpl_abort_rpl), GFP_ATOMIC);
+ if (!skb) {
+ printk("do_abort_req_rss: couldn't get skb!\n");
+ goto out;
+ }
+ skb->priority = CPL_PRIORITY_DATA;
+ __skb_put(skb, sizeof(struct cpl_abort_rpl));
+ rpl = cplhdr(skb);
+ rpl->wr.wr_hi =
+ htonl(V_WR_OP(FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL));
+ rpl->wr.wr_lo = htonl(V_WR_TID(GET_TID(req)));
+ OPCODE_TID(rpl) =
+ htonl(MK_OPCODE_TID(CPL_ABORT_RPL, GET_TID(req)));
+ rpl->cmd = req->status;
+ cxgb3_ofld_send(dev, skb);
+out:
+ return CPL_RET_BUF_DONE;
+ }
+}
+
+static int do_act_establish(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_act_establish *req = cplhdr(skb);
+ unsigned int atid = G_PASS_OPEN_TID(ntohl(req->tos_tid));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_atid(&(T3C_DATA(dev))->tid_maps, atid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[CPL_ACT_ESTABLISH]) {
+ return t3c_tid->client->handlers[CPL_ACT_ESTABLISH]
+ (dev, skb, t3c_tid->ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, CPL_PASS_ACCEPT_REQ);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int do_set_tcb_rpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_set_tcb_rpl *rpl = cplhdr(skb);
+
+ if (rpl->status != CPL_ERR_NONE)
+ printk(KERN_ERR
+ "Unexpected SET_TCB_RPL status %u for tid %u\n",
+ rpl->status, GET_TID(rpl));
+ return CPL_RET_BUF_DONE;
+}
+
+static int do_trace(struct t3cdev *dev, struct sk_buff *skb)
+{
+ struct cpl_trace_pkt *p = cplhdr(skb);
+
+ skb->protocol = 0xffff;
+ skb->dev = dev->lldev;
+ skb_pull(skb, sizeof(*p));
+ skb->mac.raw = skb->data;
+ netif_receive_skb(skb);
+ return 0;
+}
+
+static int do_term(struct t3cdev *dev, struct sk_buff *skb)
+{
+ unsigned int hwtid = ntohl(skb->priority) >> 8 & 0xfffff;
+ unsigned int opcode = G_OPCODE(ntohl(skb->csum));
+ struct t3c_tid_entry *t3c_tid;
+
+ t3c_tid = lookup_tid(&(T3C_DATA(dev))->tid_maps, hwtid);
+ if (t3c_tid->ctx && t3c_tid->client->handlers &&
+ t3c_tid->client->handlers[opcode]) {
+ return t3c_tid->client->handlers[opcode] (dev, skb,
+ t3c_tid->ctx);
+ } else {
+ printk(KERN_ERR "%s: received clientless CPL command 0x%x\n",
+ dev->name, opcode);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+ }
+}
+
+static int nb_callback(struct notifier_block *self, unsigned long event,
+ void *ctx)
+{
+ switch (event) {
+ case (NETEVENT_NEIGH_UPDATE):{
+ cxgb_neigh_update((struct neighbour *)ctx);
+ break;
+ }
+ case (NETEVENT_PMTU_UPDATE):
+ break;
+ case (NETEVENT_REDIRECT):{
+ struct netevent_redirect *nr = ctx;
+ cxgb_redirect(nr->old, nr->new);
+ cxgb_neigh_update(nr->new->neighbour);
+ break;
+ }
+ default:
+ break;
+ }
+ return 0;
+}
+
+static struct notifier_block nb = {
+ .notifier_call = nb_callback
+};
+
+/*
+ * Process a received packet with an unknown/unexpected CPL opcode.
+ */
+static int do_bad_cpl(struct t3cdev *dev, struct sk_buff *skb)
+{
+ printk(KERN_ERR "%s: received bad CPL command 0x%x\n", dev->name,
+ *skb->data);
+ return CPL_RET_BUF_DONE | CPL_RET_BAD_MSG;
+}
+
+/*
+ * Handlers for each CPL opcode
+ */
+static cpl_handler_func cpl_handlers[NUM_CPL_CMDS];
+
+/*
+ * Add a new handler to the CPL dispatch table. A NULL handler may be supplied
+ * to unregister an existing handler.
+ */
+void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h)
+{
+ if (opcode < NUM_CPL_CMDS)
+ cpl_handlers[opcode] = h ? h : do_bad_cpl;
+ else
+ printk(KERN_ERR "T3C: handler registration for "
+ "opcode %x failed\n", opcode);
+}
+
+EXPORT_SYMBOL(t3_register_cpl_handler);
+
+/*
+ * T3CDEV's receive method.
+ */
+int process_rx(struct t3cdev *dev, struct sk_buff **skbs, int n)
+{
+ while (n--) {
+ struct sk_buff *skb = *skbs++;
+ unsigned int opcode = G_OPCODE(ntohl(skb->csum));
+ int ret = cpl_handlers[opcode] (dev, skb);
+
+#if VALIDATE_TID
+ if (ret & CPL_RET_UNKNOWN_TID) {
+ union opcode_tid *p = cplhdr(skb);
+
+ printk(KERN_ERR "%s: CPL message (opcode %u) had "
+ "unknown TID %u\n", dev->name, opcode,
+ G_TID(ntohl(p->opcode_tid)));
+ }
+#endif
+ if (ret & CPL_RET_BUF_DONE)
+ kfree_skb(skb);
+ }
+ return 0;
+}
+
+/*
+ * Sends an sk_buff to a T3C driver after dealing with any active network taps.
+ */
+int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb)
+{
+ int r;
+
+ local_bh_disable();
+ r = dev->send(dev, skb);
+ local_bh_enable();
+ return r;
+}
+
+EXPORT_SYMBOL(cxgb3_ofld_send);
+
+static int is_offloading(struct net_device *dev)
+{
+ struct adapter *adapter;
+ int i;
+
+ read_lock_bh(&adapter_list_lock);
+ list_for_each_entry(adapter, &adapter_list, adapter_list) {
+ for_each_port(adapter, i) {
+ if (dev == adapter->port[i]) {
+ read_unlock_bh(&adapter_list_lock);
+ return 1;
+ }
+ }
+ }
+ read_unlock_bh(&adapter_list_lock);
+ return 0;
+}
+
+void cxgb_neigh_update(struct neighbour *neigh)
+{
+ struct net_device *dev = neigh->dev;
+
+ if (dev && (is_offloading(dev))) {
+ struct t3cdev *tdev = T3CDEV(dev);
+
+ BUG_ON(!tdev);
+ t3_l2t_update(tdev, neigh);
+ }
+}
+
+static void set_l2t_ix(struct t3cdev *tdev, u32 tid, struct l2t_entry *e)
+{
+ struct sk_buff *skb;
+ struct cpl_set_tcb_field *req;
+
+ skb = alloc_skb(sizeof(*req), GFP_ATOMIC);
+ if (!skb) {
+ printk(KERN_ERR "%s: cannot allocate skb!\n", __FUNCTION__);
+ return;
+ }
+ skb->priority = CPL_PRIORITY_CONTROL;
+ req = (struct cpl_set_tcb_field *)skb_put(skb, sizeof(*req));
+ req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_SET_TCB_FIELD, tid));
+ req->reply = 0;
+ req->cpu_idx = 0;
+ req->word = htons(W_TCB_L2T_IX);
+ req->mask = cpu_to_be64(V_TCB_L2T_IX(M_TCB_L2T_IX));
+ req->val = cpu_to_be64(V_TCB_L2T_IX(e->idx));
+ tdev->send(tdev, skb);
+}
+
+void cxgb_redirect(struct dst_entry *old, struct dst_entry *new)
+{
+ struct net_device *olddev, *newdev;
+ struct tid_info *ti;
+ struct t3cdev *tdev;
+ u32 tid;
+ int update_tcb;
+ struct l2t_entry *e;
+ struct t3c_tid_entry *te;
+
+ olddev = old->neighbour->dev;
+ newdev = new->neighbour->dev;
+ if (!is_offloading(olddev))
+ return;
+ if (!is_offloading(newdev)) {
+ printk(KERN_WARNING "%s: Redirect to non-offload"
+ "device ignored.\n", __FUNCTION__);
+ return;
+ }
+ tdev = T3CDEV(olddev);
+ BUG_ON(!tdev);
+ if (tdev != T3CDEV(newdev)) {
+ printk(KERN_WARNING "%s: Redirect to different "
+ "offload device ignored.\n", __FUNCTION__);
+ return;
+ }
+
+ /* Add new L2T entry */
+ e = t3_l2t_get(tdev, new->neighbour, newdev);
+ if (!e) {
+ printk(KERN_ERR "%s: couldn't allocate new l2t entry!\n",
+ __FUNCTION__);
+ return;
+ }
+
+ /* Walk tid table and notify clients of dst change. */
+ ti = &(T3C_DATA(tdev))->tid_maps;
+ for (tid = 0; tid < ti->ntids; tid++) {
+ te = lookup_tid(ti, tid);
+ BUG_ON(!te);
+ if (te->ctx && te->client && te->client->redirect) {
+ update_tcb = te->client->redirect(te->ctx, old, new, e);
+ if (update_tcb) {
+ l2t_hold(L2DATA(tdev), e);
+ set_l2t_ix(tdev, tid, e);
+ }
+ }
+ }
+ l2t_release(L2DATA(tdev), e);
+}
+
+/*
+ * Allocate a chunk of memory using kmalloc or, if that fails, vmalloc.
+ * The allocated memory is cleared.
+ */
+void *cxgb_alloc_mem(unsigned long size)
+{
+ void *p = kmalloc(size, GFP_KERNEL);
+
+ if (!p)
+ p = vmalloc(size);
+ if (p)
+ memset(p, 0, size);
+ return p;
+}
+
+/*
+ * Free memory allocated through t3_alloc_mem().
+ */
+void cxgb_free_mem(void *addr)
+{
+ unsigned long p = (unsigned long)addr;
+
+ if (p >= VMALLOC_START && p < VMALLOC_END)
+ vfree(addr);
+ else
+ kfree(addr);
+}
+
+/*
+ * Allocate and initialize the TID tables. Returns 0 on success.
+ */
+static int init_tid_tabs(struct tid_info *t, unsigned int ntids,
+ unsigned int natids, unsigned int nstids,
+ unsigned int atid_base, unsigned int stid_base)
+{
+ unsigned long size = ntids * sizeof(*t->tid_tab) +
+ natids * sizeof(*t->atid_tab) + nstids * sizeof(*t->stid_tab);
+
+ t->tid_tab = cxgb_alloc_mem(size);
+ if (!t->tid_tab)
+ return -ENOMEM;
+
+ t->stid_tab = (union listen_entry *)&t->tid_tab[ntids];
+ t->atid_tab = (union active_open_entry *)&t->stid_tab[nstids];
+ t->ntids = ntids;
+ t->nstids = nstids;
+ t->stid_base = stid_base;
+ t->sfree = NULL;
+ t->natids = natids;
+ t->atid_base = atid_base;
+ t->afree = NULL;
+ t->stids_in_use = t->atids_in_use = 0;
+ atomic_set(&t->tids_in_use, 0);
+ spin_lock_init(&t->stid_lock);
+ spin_lock_init(&t->atid_lock);
+
+ /*
+ * Setup the free lists for stid_tab and atid_tab.
+ */
+ if (nstids) {
+ while (--nstids)
+ t->stid_tab[nstids - 1].next = &t->stid_tab[nstids];
+ t->sfree = t->stid_tab;
+ }
+ if (natids) {
+ while (--natids)
+ t->atid_tab[natids - 1].next = &t->atid_tab[natids];
+ t->afree = t->atid_tab;
+ }
+ return 0;
+}
+
+static void free_tid_maps(struct tid_info *t)
+{
+ cxgb_free_mem(t->tid_tab);
+}
+
+static inline void add_adapter(struct adapter *adap)
+{
+ write_lock_bh(&adapter_list_lock);
+ list_add_tail(&adap->adapter_list, &adapter_list);
+ write_unlock_bh(&adapter_list_lock);
+}
+
+static inline void remove_adapter(struct adapter *adap)
+{
+ write_lock_bh(&adapter_list_lock);
+ list_del(&adap->adapter_list);
+ write_unlock_bh(&adapter_list_lock);
+}
+
+int cxgb3_offload_activate(struct adapter *adapter)
+{
+ struct t3cdev *dev = &adapter->tdev;
+ int natids, err;
+ struct t3c_data *t;
+ struct tid_range stid_range, tid_range;
+ struct mtutab mtutab;
+ unsigned int l2t_capacity;
+
+ t = kcalloc(1, sizeof(*t), GFP_KERNEL);
+ if (!t)
+ return -ENOMEM;
+
+ err = -EOPNOTSUPP;
+ if (dev->ctl(dev, GET_TX_MAX_CHUNK, &t->tx_max_chunk) < 0 ||
+ dev->ctl(dev, GET_MAX_OUTSTANDING_WR, &t->max_wrs) < 0 ||
+ dev->ctl(dev, GET_L2T_CAPACITY, &l2t_capacity) < 0 ||
+ dev->ctl(dev, GET_MTUS, &mtutab) < 0 ||
+ dev->ctl(dev, GET_TID_RANGE, &tid_range) < 0 ||
+ dev->ctl(dev, GET_STID_RANGE, &stid_range) < 0)
+ goto out_free;
+
+ err = -ENOMEM;
+ L2DATA(dev) = t3_init_l2t(l2t_capacity);
+ if (!L2DATA(dev))
+ goto out_free;
+
+ natids = min(tid_range.num / 2, MAX_ATIDS);
+ err = init_tid_tabs(&t->tid_maps, tid_range.num, natids,
+ stid_range.num, ATID_BASE, stid_range.base);
+ if (err)
+ goto out_free_l2t;
+
+ t->mtus = mtutab.mtus;
+ t->nmtus = mtutab.size;
+
+ INIT_WORK(&t->tid_release_task, t3_process_tid_release_list);
+ spin_lock_init(&t->tid_release_lock);
+ INIT_LIST_HEAD(&t->list_node);
+ t->dev = dev;
+
+ T3C_DATA(dev) = t;
+ dev->recv = process_rx;
+ dev->neigh_update = t3_l2t_update;
+
+ /* Register netevent handler once */
+ if (list_empty(&adapter_list))
+ register_netevent_notifier(&nb);
+
+ add_adapter(adapter);
+ return 0;
+
+out_free_l2t:
+ t3_free_l2t(L2DATA(dev));
+ L2DATA(dev) = NULL;
+out_free:
+ kfree(t);
+ return err;
+}
+
+void cxgb3_offload_deactivate(struct adapter *adapter)
+{
+ struct t3cdev *tdev = &adapter->tdev;
+ struct t3c_data *t = T3C_DATA(tdev);
+
+ remove_adapter(adapter);
+ if (list_empty(&adapter_list))
+ unregister_netevent_notifier(&nb);
+
+ free_tid_maps(&t->tid_maps);
+ T3C_DATA(tdev) = NULL;
+ t3_free_l2t(L2DATA(tdev));
+ L2DATA(tdev) = NULL;
+ kfree(t);
+}
+
+static inline void register_tdev(struct t3cdev *tdev)
+{
+ static int unit;
+
+ mutex_lock(&cxgb3_db_lock);
+ snprintf(tdev->name, sizeof(tdev->name), "ofld_dev%d", unit++);
+ list_add_tail(&tdev->ofld_dev_list, &ofld_dev_list);
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+static inline void unregister_tdev(struct t3cdev *tdev)
+{
+ mutex_lock(&cxgb3_db_lock);
+ list_del(&tdev->ofld_dev_list);
+ mutex_unlock(&cxgb3_db_lock);
+}
+
+void __devinit cxgb3_adapter_ofld(struct adapter *adapter)
+{
+ struct t3cdev *tdev = &adapter->tdev;
+
+ INIT_LIST_HEAD(&tdev->ofld_dev_list);
+
+ cxgb3_set_dummy_ops(tdev);
+ tdev->send = t3_offload_tx;
+ tdev->ctl = cxgb_offload_ctl;
+ tdev->type = adapter->params.rev == 0 ? T3A : T3B;
+
+ register_tdev(tdev);
+}
+
+void __devexit cxgb3_adapter_unofld(struct adapter *adapter)
+{
+ struct t3cdev *tdev = &adapter->tdev;
+
+ tdev->recv = NULL;
+ tdev->neigh_update = NULL;
+
+ unregister_tdev(tdev);
+}
+
+void __init cxgb3_offload_init(void)
+{
+ int i;
+
+ for (i = 0; i < NUM_CPL_CMDS; ++i)
+ cpl_handlers[i] = do_bad_cpl;
+
+ t3_register_cpl_handler(CPL_SMT_WRITE_RPL, do_smt_write_rpl);
+ t3_register_cpl_handler(CPL_L2T_WRITE_RPL, do_l2t_write_rpl);
+ t3_register_cpl_handler(CPL_PASS_OPEN_RPL, do_stid_rpl);
+ t3_register_cpl_handler(CPL_CLOSE_LISTSRV_RPL, do_stid_rpl);
+ t3_register_cpl_handler(CPL_PASS_ACCEPT_REQ, do_cr);
+ t3_register_cpl_handler(CPL_PASS_ESTABLISH, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_ABORT_RPL_RSS, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_ABORT_RPL, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_RX_URG_NOTIFY, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_RX_DATA, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_TX_DATA_ACK, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_TX_DMA_ACK, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_ACT_OPEN_RPL, do_act_open_rpl);
+ t3_register_cpl_handler(CPL_PEER_CLOSE, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_CLOSE_CON_RPL, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_ABORT_REQ_RSS, do_abort_req_rss);
+ t3_register_cpl_handler(CPL_ACT_ESTABLISH, do_act_establish);
+ t3_register_cpl_handler(CPL_SET_TCB_RPL, do_set_tcb_rpl);
+ t3_register_cpl_handler(CPL_RDMA_TERMINATE, do_term);
+ t3_register_cpl_handler(CPL_RDMA_EC_STATUS, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_TRACE_PKT, do_trace);
+ t3_register_cpl_handler(CPL_RX_DATA_DDP, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_RX_DDP_COMPLETE, do_hwtid_rpl);
+ t3_register_cpl_handler(CPL_ISCSI_HDR, do_hwtid_rpl);
+}
--- /dev/null
+/*
+ * Copyright (c) 2006-2007 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CXGB3_OFFLOAD_H
+#define _CXGB3_OFFLOAD_H
+
+#include <linux/list.h>
+#include <linux/skbuff.h>
+
+#include "l2t.h"
+
+#include "t3cdev.h"
+#include "t3_cpl.h"
+
+struct adapter;
+
+void cxgb3_offload_init(void);
+
+void cxgb3_adapter_ofld(struct adapter *adapter);
+void cxgb3_adapter_unofld(struct adapter *adapter);
+int cxgb3_offload_activate(struct adapter *adapter);
+void cxgb3_offload_deactivate(struct adapter *adapter);
+
+void cxgb3_set_dummy_ops(struct t3cdev *dev);
+
+/*
+ * Client registration. Users of T3 driver must register themselves.
+ * The T3 driver will call the add function of every client for each T3
+ * adapter activated, passing up the t3cdev ptr. Each client fills out an
+ * array of callback functions to process CPL messages.
+ */
+
+void cxgb3_register_client(struct cxgb3_client *client);
+void cxgb3_unregister_client(struct cxgb3_client *client);
+void cxgb3_add_clients(struct t3cdev *tdev);
+void cxgb3_remove_clients(struct t3cdev *tdev);
+
+typedef int (*cxgb3_cpl_handler_func)(struct t3cdev *dev,
+ struct sk_buff *skb, void *ctx);
+
+struct cxgb3_client {
+ char *name;
+ void (*add) (struct t3cdev *);
+ void (*remove) (struct t3cdev *);
+ cxgb3_cpl_handler_func *handlers;
+ int (*redirect)(void *ctx, struct dst_entry *old,
+ struct dst_entry *new, struct l2t_entry *l2t);
+ struct list_head client_list;
+};
+
+/*
+ * TID allocation services.
+ */
+int cxgb3_alloc_atid(struct t3cdev *dev, struct cxgb3_client *client,
+ void *ctx);
+int cxgb3_alloc_stid(struct t3cdev *dev, struct cxgb3_client *client,
+ void *ctx);
+void *cxgb3_free_atid(struct t3cdev *dev, int atid);
+void cxgb3_free_stid(struct t3cdev *dev, int stid);
+void cxgb3_insert_tid(struct t3cdev *dev, struct cxgb3_client *client,
+ void *ctx, unsigned int tid);
+void cxgb3_queue_tid_release(struct t3cdev *dev, unsigned int tid);
+void cxgb3_remove_tid(struct t3cdev *dev, void *ctx, unsigned int tid);
+
+struct t3c_tid_entry {
+ struct cxgb3_client *client;
+ void *ctx;
+};
+
+/* CPL message priority levels */
+enum {
+ CPL_PRIORITY_DATA = 0, /* data messages */
+ CPL_PRIORITY_SETUP = 1, /* connection setup messages */
+ CPL_PRIORITY_TEARDOWN = 0, /* connection teardown messages */
+ CPL_PRIORITY_LISTEN = 1, /* listen start/stop messages */
+ CPL_PRIORITY_ACK = 1, /* RX ACK messages */
+ CPL_PRIORITY_CONTROL = 1 /* offload control messages */
+};
+
+/* Flags for return value of CPL message handlers */
+enum {
+ CPL_RET_BUF_DONE = 1, /* buffer processing done, buffer may be freed */
+ CPL_RET_BAD_MSG = 2, /* bad CPL message (e.g., unknown opcode) */
+ CPL_RET_UNKNOWN_TID = 4 /* unexpected unknown TID */
+};
+
+typedef int (*cpl_handler_func)(struct t3cdev *dev, struct sk_buff *skb);
+
+/*
+ * Returns a pointer to the first byte of the CPL header in an sk_buff that
+ * contains a CPL message.
+ */
+static inline void *cplhdr(struct sk_buff *skb)
+{
+ return skb->data;
+}
+
+void t3_register_cpl_handler(unsigned int opcode, cpl_handler_func h);
+
+union listen_entry {
+ struct t3c_tid_entry t3c_tid;
+ union listen_entry *next;
+};
+
+union active_open_entry {
+ struct t3c_tid_entry t3c_tid;
+ union active_open_entry *next;
+};
+
+/*
+ * Holds the size, base address, free list start, etc of the TID, server TID,
+ * and active-open TID tables for a offload device.
+ * The tables themselves are allocated dynamically.
+ */
+struct tid_info {
+ struct t3c_tid_entry *tid_tab;
+ unsigned int ntids;
+ atomic_t tids_in_use;
+
+ union listen_entry *stid_tab;
+ unsigned int nstids;
+ unsigned int stid_base;
+
+ union active_open_entry *atid_tab;
+ unsigned int natids;
+ unsigned int atid_base;
+
+ /*
+ * The following members are accessed R/W so we put them in their own
+ * cache lines.
+ *
+ * XXX We could combine the atid fields above with the lock here since
+ * atids are use once (unlike other tids). OTOH the above fields are
+ * usually in cache due to tid_tab.
+ */
+ spinlock_t atid_lock ____cacheline_aligned_in_smp;
+ union active_open_entry *afree;
+ unsigned int atids_in_use;
+
+ spinlock_t stid_lock ____cacheline_aligned;
+ union listen_entry *sfree;
+ unsigned int stids_in_use;
+};
+
+struct t3c_data {
+ struct list_head list_node;
+ struct t3cdev *dev;
+ unsigned int tx_max_chunk; /* max payload for TX_DATA */
+ unsigned int max_wrs; /* max in-flight WRs per connection */
+ unsigned int nmtus;
+ const unsigned short *mtus;
+ struct tid_info tid_maps;
+
+ struct t3c_tid_entry *tid_release_list;
+ spinlock_t tid_release_lock;
+ struct work_struct tid_release_task;
+};
+
+/*
+ * t3cdev -> t3c_data accessor
+ */
+#define T3C_DATA(dev) (*(struct t3c_data **)&(dev)->l4opt)
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FIRMWARE_EXPORTS_H_
+#define _FIRMWARE_EXPORTS_H_
+
+/* WR OPCODES supported by the firmware.
+ */
+#define FW_WROPCODE_FORWARD 0x01
+#define FW_WROPCODE_BYPASS 0x05
+
+#define FW_WROPCODE_TUNNEL_TX_PKT 0x03
+
+#define FW_WROPOCDE_ULPTX_DATA_SGL 0x00
+#define FW_WROPCODE_ULPTX_MEM_READ 0x02
+#define FW_WROPCODE_ULPTX_PKT 0x04
+#define FW_WROPCODE_ULPTX_INVALIDATE 0x06
+
+#define FW_WROPCODE_TUNNEL_RX_PKT 0x07
+
+#define FW_WROPCODE_OFLD_GETTCB_RPL 0x08
+#define FW_WROPCODE_OFLD_CLOSE_CON 0x09
+#define FW_WROPCODE_OFLD_TP_ABORT_CON_REQ 0x0A
+#define FW_WROPCODE_OFLD_HOST_ABORT_CON_RPL 0x0F
+#define FW_WROPCODE_OFLD_HOST_ABORT_CON_REQ 0x0B
+#define FW_WROPCODE_OFLD_TP_ABORT_CON_RPL 0x0C
+#define FW_WROPCODE_OFLD_TX_DATA 0x0D
+#define FW_WROPCODE_OFLD_TX_DATA_ACK 0x0E
+
+#define FW_WROPCODE_RI_RDMA_INIT 0x10
+#define FW_WROPCODE_RI_RDMA_WRITE 0x11
+#define FW_WROPCODE_RI_RDMA_READ_REQ 0x12
+#define FW_WROPCODE_RI_RDMA_READ_RESP 0x13
+#define FW_WROPCODE_RI_SEND 0x14
+#define FW_WROPCODE_RI_TERMINATE 0x15
+#define FW_WROPCODE_RI_RDMA_READ 0x16
+#define FW_WROPCODE_RI_RECEIVE 0x17
+#define FW_WROPCODE_RI_BIND_MW 0x18
+#define FW_WROPCODE_RI_FASTREGISTER_MR 0x19
+#define FW_WROPCODE_RI_LOCAL_INV 0x1A
+#define FW_WROPCODE_RI_MODIFY_QP 0x1B
+#define FW_WROPCODE_RI_BYPASS 0x1C
+
+#define FW_WROPOCDE_RSVD 0x1E
+
+#define FW_WROPCODE_SGE_EGRESSCONTEXT_RR 0x1F
+
+#define FW_WROPCODE_MNGT 0x1D
+#define FW_MNGTOPCODE_PKTSCHED_SET 0x00
+
+/* Maximum size of a WR sent from the host, limited by the SGE.
+ *
+ * Note: WR coming from ULP or TP are only limited by CIM.
+ */
+#define FW_WR_SIZE 128
+
+/* Maximum number of outstanding WRs sent from the host. Value must be
+ * programmed in the CTRL/TUNNEL/QP SGE Egress Context and used by
+ * offload modules to limit the number of WRs per connection.
+ */
+#define FW_T3_WR_NUM 16
+#define FW_N3_WR_NUM 7
+
+#ifndef N3
+# define FW_WR_NUM FW_T3_WR_NUM
+#else
+# define FW_WR_NUM FW_N3_WR_NUM
+#endif
+
+/* FW_TUNNEL_NUM corresponds to the number of supported TUNNEL Queues. These
+ * queues must start at SGE Egress Context FW_TUNNEL_SGEEC_START and must
+ * start at 'TID' (or 'uP Token') FW_TUNNEL_TID_START.
+ *
+ * Ingress Traffic (e.g. DMA completion credit) for TUNNEL Queue[i] is sent
+ * to RESP Queue[i].
+ */
+#define FW_TUNNEL_NUM 8
+#define FW_TUNNEL_SGEEC_START 8
+#define FW_TUNNEL_TID_START 65544
+
+/* FW_CTRL_NUM corresponds to the number of supported CTRL Queues. These queues
+ * must start at SGE Egress Context FW_CTRL_SGEEC_START and must start at 'TID'
+ * (or 'uP Token') FW_CTRL_TID_START.
+ *
+ * Ingress Traffic for CTRL Queue[i] is sent to RESP Queue[i].
+ */
+#define FW_CTRL_NUM 8
+#define FW_CTRL_SGEEC_START 65528
+#define FW_CTRL_TID_START 65536
+
+/* FW_OFLD_NUM corresponds to the number of supported OFFLOAD Queues. These
+ * queues must start at SGE Egress Context FW_OFLD_SGEEC_START.
+ *
+ * Note: the 'uP Token' in the SGE Egress Context fields is irrelevant for
+ * OFFLOAD Queues, as the host is responsible for providing the correct TID in
+ * every WR.
+ *
+ * Ingress Trafffic for OFFLOAD Queue[i] is sent to RESP Queue[i].
+ */
+#define FW_OFLD_NUM 8
+#define FW_OFLD_SGEEC_START 0
+
+/*
+ *
+ */
+#define FW_RI_NUM 1
+#define FW_RI_SGEEC_START 65527
+#define FW_RI_TID_START 65552
+
+/*
+ * The RX_PKT_TID
+ */
+#define FW_RX_PKT_NUM 1
+#define FW_RX_PKT_TID_START 65553
+
+/* FW_WRC_NUM corresponds to the number of Work Request Context that supported
+ * by the firmware.
+ */
+#define FW_WRC_NUM \
+ (65536 + FW_TUNNEL_NUM + FW_CTRL_NUM + FW_RI_NUM + FW_RX_PKT_NUM)
+
+/*
+ * FW type and version.
+ */
+#define S_FW_VERSION_TYPE 28
+#define M_FW_VERSION_TYPE 0xF
+#define V_FW_VERSION_TYPE(x) ((x) << S_FW_VERSION_TYPE)
+#define G_FW_VERSION_TYPE(x) \
+ (((x) >> S_FW_VERSION_TYPE) & M_FW_VERSION_TYPE)
+
+#define S_FW_VERSION_MAJOR 16
+#define M_FW_VERSION_MAJOR 0xFFF
+#define V_FW_VERSION_MAJOR(x) ((x) << S_FW_VERSION_MAJOR)
+#define G_FW_VERSION_MAJOR(x) \
+ (((x) >> S_FW_VERSION_MAJOR) & M_FW_VERSION_MAJOR)
+
+#define S_FW_VERSION_MINOR 8
+#define M_FW_VERSION_MINOR 0xFF
+#define V_FW_VERSION_MINOR(x) ((x) << S_FW_VERSION_MINOR)
+#define G_FW_VERSION_MINOR(x) \
+ (((x) >> S_FW_VERSION_MINOR) & M_FW_VERSION_MINOR)
+
+#define S_FW_VERSION_MICRO 0
+#define M_FW_VERSION_MICRO 0xFF
+#define V_FW_VERSION_MICRO(x) ((x) << S_FW_VERSION_MICRO)
+#define G_FW_VERSION_MICRO(x) \
+ (((x) >> S_FW_VERSION_MICRO) & M_FW_VERSION_MICRO)
+
+#endif /* _FIRMWARE_EXPORTS_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/if.h>
+#include <linux/if_vlan.h>
+#include <linux/jhash.h>
+#include <net/neighbour.h>
+#include "common.h"
+#include "t3cdev.h"
+#include "cxgb3_defs.h"
+#include "l2t.h"
+#include "t3_cpl.h"
+#include "firmware_exports.h"
+
+#define VLAN_NONE 0xfff
+
+/*
+ * Module locking notes: There is a RW lock protecting the L2 table as a
+ * whole plus a spinlock per L2T entry. Entry lookups and allocations happen
+ * under the protection of the table lock, individual entry changes happen
+ * while holding that entry's spinlock. The table lock nests outside the
+ * entry locks. Allocations of new entries take the table lock as writers so
+ * no other lookups can happen while allocating new entries. Entry updates
+ * take the table lock as readers so multiple entries can be updated in
+ * parallel. An L2T entry can be dropped by decrementing its reference count
+ * and therefore can happen in parallel with entry allocation but no entry
+ * can change state or increment its ref count during allocation as both of
+ * these perform lookups.
+ */
+
+static inline unsigned int vlan_prio(const struct l2t_entry *e)
+{
+ return e->vlan >> 13;
+}
+
+static inline unsigned int arp_hash(u32 key, int ifindex,
+ const struct l2t_data *d)
+{
+ return jhash_2words(key, ifindex, 0) & (d->nentries - 1);
+}
+
+static inline void neigh_replace(struct l2t_entry *e, struct neighbour *n)
+{
+ neigh_hold(n);
+ if (e->neigh)
+ neigh_release(e->neigh);
+ e->neigh = n;
+}
+
+/*
+ * Set up an L2T entry and send any packets waiting in the arp queue. The
+ * supplied skb is used for the CPL_L2T_WRITE_REQ. Must be called with the
+ * entry locked.
+ */
+static int setup_l2e_send_pending(struct t3cdev *dev, struct sk_buff *skb,
+ struct l2t_entry *e)
+{
+ struct cpl_l2t_write_req *req;
+
+ if (!skb) {
+ skb = alloc_skb(sizeof(*req), GFP_ATOMIC);
+ if (!skb)
+ return -ENOMEM;
+ }
+
+ req = (struct cpl_l2t_write_req *)__skb_put(skb, sizeof(*req));
+ req->wr.wr_hi = htonl(V_WR_OP(FW_WROPCODE_FORWARD));
+ OPCODE_TID(req) = htonl(MK_OPCODE_TID(CPL_L2T_WRITE_REQ, e->idx));
+ req->params = htonl(V_L2T_W_IDX(e->idx) | V_L2T_W_IFF(e->smt_idx) |
+ V_L2T_W_VLAN(e->vlan & VLAN_VID_MASK) |
+ V_L2T_W_PRIO(vlan_prio(e)));
+ memcpy(e->dmac, e->neigh->ha, sizeof(e->dmac));
+ memcpy(req->dst_mac, e->dmac, sizeof(req->dst_mac));
+ skb->priority = CPL_PRIORITY_CONTROL;
+ cxgb3_ofld_send(dev, skb);
+ while (e->arpq_head) {
+ skb = e->arpq_head;
+ e->arpq_head = skb->next;
+ skb->next = NULL;
+ cxgb3_ofld_send(dev, skb);
+ }
+ e->arpq_tail = NULL;
+ e->state = L2T_STATE_VALID;
+
+ return 0;
+}
+
+/*
+ * Add a packet to the an L2T entry's queue of packets awaiting resolution.
+ * Must be called with the entry's lock held.
+ */
+static inline void arpq_enqueue(struct l2t_entry *e, struct sk_buff *skb)
+{
+ skb->next = NULL;
+ if (e->arpq_head)
+ e->arpq_tail->next = skb;
+ else
+ e->arpq_head = skb;
+ e->arpq_tail = skb;
+}
+
+int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb,
+ struct l2t_entry *e)
+{
+again:
+ switch (e->state) {
+ case L2T_STATE_STALE: /* entry is stale, kick off revalidation */
+ neigh_event_send(e->neigh, NULL);
+ spin_lock_bh(&e->lock);
+ if (e->state == L2T_STATE_STALE)
+ e->state = L2T_STATE_VALID;
+ spin_unlock_bh(&e->lock);
+ case L2T_STATE_VALID: /* fast-path, send the packet on */
+ return cxgb3_ofld_send(dev, skb);
+ case L2T_STATE_RESOLVING:
+ spin_lock_bh(&e->lock);
+ if (e->state != L2T_STATE_RESOLVING) {
+ /* ARP already completed */
+ spin_unlock_bh(&e->lock);
+ goto again;
+ }
+ arpq_enqueue(e, skb);
+ spin_unlock_bh(&e->lock);
+
+ /*
+ * Only the first packet added to the arpq should kick off
+ * resolution. However, because the alloc_skb below can fail,
+ * we allow each packet added to the arpq to retry resolution
+ * as a way of recovering from transient memory exhaustion.
+ * A better way would be to use a work request to retry L2T
+ * entries when there's no memory.
+ */
+ if (!neigh_event_send(e->neigh, NULL)) {
+ skb = alloc_skb(sizeof(struct cpl_l2t_write_req),
+ GFP_ATOMIC);
+ if (!skb)
+ break;
+
+ spin_lock_bh(&e->lock);
+ if (e->arpq_head)
+ setup_l2e_send_pending(dev, skb, e);
+ else /* we lost the race */
+ __kfree_skb(skb);
+ spin_unlock_bh(&e->lock);
+ }
+ }
+ return 0;
+}
+
+EXPORT_SYMBOL(t3_l2t_send_slow);
+
+void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e)
+{
+again:
+ switch (e->state) {
+ case L2T_STATE_STALE: /* entry is stale, kick off revalidation */
+ neigh_event_send(e->neigh, NULL);
+ spin_lock_bh(&e->lock);
+ if (e->state == L2T_STATE_STALE) {
+ e->state = L2T_STATE_VALID;
+ }
+ spin_unlock_bh(&e->lock);
+ return;
+ case L2T_STATE_VALID: /* fast-path, send the packet on */
+ return;
+ case L2T_STATE_RESOLVING:
+ spin_lock_bh(&e->lock);
+ if (e->state != L2T_STATE_RESOLVING) {
+ /* ARP already completed */
+ spin_unlock_bh(&e->lock);
+ goto again;
+ }
+ spin_unlock_bh(&e->lock);
+
+ /*
+ * Only the first packet added to the arpq should kick off
+ * resolution. However, because the alloc_skb below can fail,
+ * we allow each packet added to the arpq to retry resolution
+ * as a way of recovering from transient memory exhaustion.
+ * A better way would be to use a work request to retry L2T
+ * entries when there's no memory.
+ */
+ neigh_event_send(e->neigh, NULL);
+ }
+ return;
+}
+
+EXPORT_SYMBOL(t3_l2t_send_event);
+
+/*
+ * Allocate a free L2T entry. Must be called with l2t_data.lock held.
+ */
+static struct l2t_entry *alloc_l2e(struct l2t_data *d)
+{
+ struct l2t_entry *end, *e, **p;
+
+ if (!atomic_read(&d->nfree))
+ return NULL;
+
+ /* there's definitely a free entry */
+ for (e = d->rover, end = &d->l2tab[d->nentries]; e != end; ++e)
+ if (atomic_read(&e->refcnt) == 0)
+ goto found;
+
+ for (e = &d->l2tab[1]; atomic_read(&e->refcnt); ++e) ;
+found:
+ d->rover = e + 1;
+ atomic_dec(&d->nfree);
+
+ /*
+ * The entry we found may be an inactive entry that is
+ * presently in the hash table. We need to remove it.
+ */
+ if (e->state != L2T_STATE_UNUSED) {
+ int hash = arp_hash(e->addr, e->ifindex, d);
+
+ for (p = &d->l2tab[hash].first; *p; p = &(*p)->next)
+ if (*p == e) {
+ *p = e->next;
+ break;
+ }
+ e->state = L2T_STATE_UNUSED;
+ }
+ return e;
+}
+
+/*
+ * Called when an L2T entry has no more users. The entry is left in the hash
+ * table since it is likely to be reused but we also bump nfree to indicate
+ * that the entry can be reallocated for a different neighbor. We also drop
+ * the existing neighbor reference in case the neighbor is going away and is
+ * waiting on our reference.
+ *
+ * Because entries can be reallocated to other neighbors once their ref count
+ * drops to 0 we need to take the entry's lock to avoid races with a new
+ * incarnation.
+ */
+void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e)
+{
+ spin_lock_bh(&e->lock);
+ if (atomic_read(&e->refcnt) == 0) { /* hasn't been recycled */
+ if (e->neigh) {
+ neigh_release(e->neigh);
+ e->neigh = NULL;
+ }
+ }
+ spin_unlock_bh(&e->lock);
+ atomic_inc(&d->nfree);
+}
+
+EXPORT_SYMBOL(t3_l2e_free);
+
+/*
+ * Update an L2T entry that was previously used for the same next hop as neigh.
+ * Must be called with softirqs disabled.
+ */
+static inline void reuse_entry(struct l2t_entry *e, struct neighbour *neigh)
+{
+ unsigned int nud_state;
+
+ spin_lock(&e->lock); /* avoid race with t3_l2t_free */
+
+ if (neigh != e->neigh)
+ neigh_replace(e, neigh);
+ nud_state = neigh->nud_state;
+ if (memcmp(e->dmac, neigh->ha, sizeof(e->dmac)) ||
+ !(nud_state & NUD_VALID))
+ e->state = L2T_STATE_RESOLVING;
+ else if (nud_state & NUD_CONNECTED)
+ e->state = L2T_STATE_VALID;
+ else
+ e->state = L2T_STATE_STALE;
+ spin_unlock(&e->lock);
+}
+
+struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
+ struct net_device *dev)
+{
+ struct l2t_entry *e;
+ struct l2t_data *d = L2DATA(cdev);
+ u32 addr = *(u32 *) neigh->primary_key;
+ int ifidx = neigh->dev->ifindex;
+ int hash = arp_hash(addr, ifidx, d);
+ struct port_info *p = netdev_priv(dev);
+ int smt_idx = p->port_id;
+
+ write_lock_bh(&d->lock);
+ for (e = d->l2tab[hash].first; e; e = e->next)
+ if (e->addr == addr && e->ifindex == ifidx &&
+ e->smt_idx == smt_idx) {
+ l2t_hold(d, e);
+ if (atomic_read(&e->refcnt) == 1)
+ reuse_entry(e, neigh);
+ goto done;
+ }
+
+ /* Need to allocate a new entry */
+ e = alloc_l2e(d);
+ if (e) {
+ spin_lock(&e->lock); /* avoid race with t3_l2t_free */
+ e->next = d->l2tab[hash].first;
+ d->l2tab[hash].first = e;
+ e->state = L2T_STATE_RESOLVING;
+ e->addr = addr;
+ e->ifindex = ifidx;
+ e->smt_idx = smt_idx;
+ atomic_set(&e->refcnt, 1);
+ neigh_replace(e, neigh);
+ if (neigh->dev->priv_flags & IFF_802_1Q_VLAN)
+ e->vlan = VLAN_DEV_INFO(neigh->dev)->vlan_id;
+ else
+ e->vlan = VLAN_NONE;
+ spin_unlock(&e->lock);
+ }
+done:
+ write_unlock_bh(&d->lock);
+ return e;
+}
+
+EXPORT_SYMBOL(t3_l2t_get);
+
+/*
+ * Called when address resolution fails for an L2T entry to handle packets
+ * on the arpq head. If a packet specifies a failure handler it is invoked,
+ * otherwise the packets is sent to the offload device.
+ *
+ * XXX: maybe we should abandon the latter behavior and just require a failure
+ * handler.
+ */
+static void handle_failed_resolution(struct t3cdev *dev, struct sk_buff *arpq)
+{
+ while (arpq) {
+ struct sk_buff *skb = arpq;
+ struct l2t_skb_cb *cb = L2T_SKB_CB(skb);
+
+ arpq = skb->next;
+ skb->next = NULL;
+ if (cb->arp_failure_handler)
+ cb->arp_failure_handler(dev, skb);
+ else
+ cxgb3_ofld_send(dev, skb);
+ }
+}
+
+/*
+ * Called when the host's ARP layer makes a change to some entry that is
+ * loaded into the HW L2 table.
+ */
+void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh)
+{
+ struct l2t_entry *e;
+ struct sk_buff *arpq = NULL;
+ struct l2t_data *d = L2DATA(dev);
+ u32 addr = *(u32 *) neigh->primary_key;
+ int ifidx = neigh->dev->ifindex;
+ int hash = arp_hash(addr, ifidx, d);
+
+ read_lock_bh(&d->lock);
+ for (e = d->l2tab[hash].first; e; e = e->next)
+ if (e->addr == addr && e->ifindex == ifidx) {
+ spin_lock(&e->lock);
+ goto found;
+ }
+ read_unlock_bh(&d->lock);
+ return;
+
+found:
+ read_unlock(&d->lock);
+ if (atomic_read(&e->refcnt)) {
+ if (neigh != e->neigh)
+ neigh_replace(e, neigh);
+
+ if (e->state == L2T_STATE_RESOLVING) {
+ if (neigh->nud_state & NUD_FAILED) {
+ arpq = e->arpq_head;
+ e->arpq_head = e->arpq_tail = NULL;
+ } else if (neigh_is_connected(neigh))
+ setup_l2e_send_pending(dev, NULL, e);
+ } else {
+ e->state = neigh_is_connected(neigh) ?
+ L2T_STATE_VALID : L2T_STATE_STALE;
+ if (memcmp(e->dmac, neigh->ha, 6))
+ setup_l2e_send_pending(dev, NULL, e);
+ }
+ }
+ spin_unlock_bh(&e->lock);
+
+ if (arpq)
+ handle_failed_resolution(dev, arpq);
+}
+
+struct l2t_data *t3_init_l2t(unsigned int l2t_capacity)
+{
+ struct l2t_data *d;
+ int i, size = sizeof(*d) + l2t_capacity * sizeof(struct l2t_entry);
+
+ d = cxgb_alloc_mem(size);
+ if (!d)
+ return NULL;
+
+ d->nentries = l2t_capacity;
+ d->rover = &d->l2tab[1]; /* entry 0 is not used */
+ atomic_set(&d->nfree, l2t_capacity - 1);
+ rwlock_init(&d->lock);
+
+ for (i = 0; i < l2t_capacity; ++i) {
+ d->l2tab[i].idx = i;
+ d->l2tab[i].state = L2T_STATE_UNUSED;
+ spin_lock_init(&d->l2tab[i].lock);
+ atomic_set(&d->l2tab[i].refcnt, 0);
+ }
+ return d;
+}
+
+void t3_free_l2t(struct l2t_data *d)
+{
+ cxgb_free_mem(d);
+}
+
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ * Copyright (c) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CHELSIO_L2T_H
+#define _CHELSIO_L2T_H
+
+#include <linux/spinlock.h>
+#include "t3cdev.h"
+#include <asm/atomic.h>
+
+enum {
+ L2T_STATE_VALID, /* entry is up to date */
+ L2T_STATE_STALE, /* entry may be used but needs revalidation */
+ L2T_STATE_RESOLVING, /* entry needs address resolution */
+ L2T_STATE_UNUSED /* entry not in use */
+};
+
+struct neighbour;
+struct sk_buff;
+
+/*
+ * Each L2T entry plays multiple roles. First of all, it keeps state for the
+ * corresponding entry of the HW L2 table and maintains a queue of offload
+ * packets awaiting address resolution. Second, it is a node of a hash table
+ * chain, where the nodes of the chain are linked together through their next
+ * pointer. Finally, each node is a bucket of a hash table, pointing to the
+ * first element in its chain through its first pointer.
+ */
+struct l2t_entry {
+ u16 state; /* entry state */
+ u16 idx; /* entry index */
+ u32 addr; /* dest IP address */
+ int ifindex; /* neighbor's net_device's ifindex */
+ u16 smt_idx; /* SMT index */
+ u16 vlan; /* VLAN TCI (id: bits 0-11, prio: 13-15 */
+ struct neighbour *neigh; /* associated neighbour */
+ struct l2t_entry *first; /* start of hash chain */
+ struct l2t_entry *next; /* next l2t_entry on chain */
+ struct sk_buff *arpq_head; /* queue of packets awaiting resolution */
+ struct sk_buff *arpq_tail;
+ spinlock_t lock;
+ atomic_t refcnt; /* entry reference count */
+ u8 dmac[6]; /* neighbour's MAC address */
+};
+
+struct l2t_data {
+ unsigned int nentries; /* number of entries */
+ struct l2t_entry *rover; /* starting point for next allocation */
+ atomic_t nfree; /* number of free entries */
+ rwlock_t lock;
+ struct l2t_entry l2tab[0];
+};
+
+typedef void (*arp_failure_handler_func)(struct t3cdev * dev,
+ struct sk_buff * skb);
+
+/*
+ * Callback stored in an skb to handle address resolution failure.
+ */
+struct l2t_skb_cb {
+ arp_failure_handler_func arp_failure_handler;
+};
+
+#define L2T_SKB_CB(skb) ((struct l2t_skb_cb *)(skb)->cb)
+
+static inline void set_arp_failure_handler(struct sk_buff *skb,
+ arp_failure_handler_func hnd)
+{
+ L2T_SKB_CB(skb)->arp_failure_handler = hnd;
+}
+
+/*
+ * Getting to the L2 data from an offload device.
+ */
+#define L2DATA(dev) ((dev)->l2opt)
+
+#define W_TCB_L2T_IX 0
+#define S_TCB_L2T_IX 7
+#define M_TCB_L2T_IX 0x7ffULL
+#define V_TCB_L2T_IX(x) ((x) << S_TCB_L2T_IX)
+
+void t3_l2e_free(struct l2t_data *d, struct l2t_entry *e);
+void t3_l2t_update(struct t3cdev *dev, struct neighbour *neigh);
+struct l2t_entry *t3_l2t_get(struct t3cdev *cdev, struct neighbour *neigh,
+ struct net_device *dev);
+int t3_l2t_send_slow(struct t3cdev *dev, struct sk_buff *skb,
+ struct l2t_entry *e);
+void t3_l2t_send_event(struct t3cdev *dev, struct l2t_entry *e);
+struct l2t_data *t3_init_l2t(unsigned int l2t_capacity);
+void t3_free_l2t(struct l2t_data *d);
+
+int cxgb3_ofld_send(struct t3cdev *dev, struct sk_buff *skb);
+
+static inline int l2t_send(struct t3cdev *dev, struct sk_buff *skb,
+ struct l2t_entry *e)
+{
+ if (likely(e->state == L2T_STATE_VALID))
+ return cxgb3_ofld_send(dev, skb);
+ return t3_l2t_send_slow(dev, skb, e);
+}
+
+static inline void l2t_release(struct l2t_data *d, struct l2t_entry *e)
+{
+ if (atomic_dec_and_test(&e->refcnt))
+ t3_l2e_free(d, e);
+}
+
+static inline void l2t_hold(struct l2t_data *d, struct l2t_entry *e)
+{
+ if (atomic_add_return(1, &e->refcnt) == 1) /* 0 -> 1 transition */
+ atomic_dec(&d->nfree);
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+enum {
+ IDT75P52100 = 4,
+ IDT75N43102 = 5
+};
+
+/* DBGI command mode */
+enum {
+ DBGI_MODE_MBUS = 0,
+ DBGI_MODE_IDT52100 = 5
+};
+
+/* IDT 75P52100 commands */
+#define IDT_CMD_READ 0
+#define IDT_CMD_WRITE 1
+#define IDT_CMD_SEARCH 2
+#define IDT_CMD_LEARN 3
+
+/* IDT LAR register address and value for 144-bit mode (low 32 bits) */
+#define IDT_LAR_ADR0 0x180006
+#define IDT_LAR_MODE144 0xffff0000
+
+/* IDT SCR and SSR addresses (low 32 bits) */
+#define IDT_SCR_ADR0 0x180000
+#define IDT_SSR0_ADR0 0x180002
+#define IDT_SSR1_ADR0 0x180004
+
+/* IDT GMR base address (low 32 bits) */
+#define IDT_GMR_BASE_ADR0 0x180020
+
+/* IDT data and mask array base addresses (low 32 bits) */
+#define IDT_DATARY_BASE_ADR0 0
+#define IDT_MSKARY_BASE_ADR0 0x80000
+
+/* IDT 75N43102 commands */
+#define IDT4_CMD_SEARCH144 3
+#define IDT4_CMD_WRITE 4
+#define IDT4_CMD_READ 5
+
+/* IDT 75N43102 SCR address (low 32 bits) */
+#define IDT4_SCR_ADR0 0x3
+
+/* IDT 75N43102 GMR base addresses (low 32 bits) */
+#define IDT4_GMR_BASE0 0x10
+#define IDT4_GMR_BASE1 0x20
+#define IDT4_GMR_BASE2 0x30
+
+/* IDT 75N43102 data and mask array base addresses (low 32 bits) */
+#define IDT4_DATARY_BASE_ADR0 0x1000000
+#define IDT4_MSKARY_BASE_ADR0 0x2000000
+
+#define MAX_WRITE_ATTEMPTS 5
+
+#define MAX_ROUTES 2048
+
+/*
+ * Issue a command to the TCAM and wait for its completion. The address and
+ * any data required by the command must have been setup by the caller.
+ */
+static int mc5_cmd_write(struct adapter *adapter, u32 cmd)
+{
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
+ return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
+ F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
+}
+
+static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2,
+ u32 v3)
+{
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
+}
+
+static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2,
+ u32 v3)
+{
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
+}
+
+static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2,
+ u32 *v3)
+{
+ *v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
+ *v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
+ *v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
+}
+
+/*
+ * Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
+ * command cmd. The data to be written must have been set up by the caller.
+ * Returns -1 on failure, 0 on success.
+ */
+static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd)
+{
+ t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
+ if (mc5_cmd_write(adapter, cmd) == 0)
+ return 0;
+ CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n",
+ addr_lo);
+ return -1;
+}
+
+static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
+ u32 data_array_base, u32 write_cmd,
+ int addr_shift)
+{
+ unsigned int i;
+ struct adapter *adap = mc5->adapter;
+
+ /*
+ * We need the size of the TCAM data and mask arrays in terms of
+ * 72-bit entries.
+ */
+ unsigned int size72 = mc5->tcam_size;
+ unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);
+
+ if (mc5->mode == MC5_MODE_144_BIT) {
+ size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */
+ server_base *= 2;
+ }
+
+ /* Clear the data array */
+ dbgi_wr_data3(adap, 0, 0, 0);
+ for (i = 0; i < size72; i++)
+ if (mc5_write(adap, data_array_base + (i << addr_shift),
+ write_cmd))
+ return -1;
+
+ /* Initialize the mask array. */
+ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
+ for (i = 0; i < size72; i++) {
+ if (i == server_base) /* entering server or routing region */
+ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0,
+ mc5->mode == MC5_MODE_144_BIT ?
+ 0xfffffff9 : 0xfffffffd);
+ if (mc5_write(adap, mask_array_base + (i << addr_shift),
+ write_cmd))
+ return -1;
+ }
+ return 0;
+}
+
+static int init_idt52100(struct mc5 *mc5)
+{
+ int i;
+ struct adapter *adap = mc5->adapter;
+
+ t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
+ V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
+ t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);
+
+ /*
+ * Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
+ * GMRs 8-9 for ACK- and AOPEN searches.
+ */
+ t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
+ t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
+ t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
+ t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
+ t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
+ t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
+ t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
+ t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
+ t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);
+
+ /* Set DBGI command mode for IDT TCAM. */
+ t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
+
+ /* Set up LAR */
+ dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
+ if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
+ goto err;
+
+ /* Set up SSRs */
+ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
+ if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
+ mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
+ goto err;
+
+ /* Set up GMRs */
+ for (i = 0; i < 32; ++i) {
+ if (i >= 12 && i < 15)
+ dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
+ else if (i == 15)
+ dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
+ else
+ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
+
+ if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
+ goto err;
+ }
+
+ /* Set up SCR */
+ dbgi_wr_data3(adap, 1, 0, 0);
+ if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
+ goto err;
+
+ return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
+ IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
+err:
+ return -EIO;
+}
+
+static int init_idt43102(struct mc5 *mc5)
+{
+ int i;
+ struct adapter *adap = mc5->adapter;
+
+ t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
+ adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
+ V_RDLAT(0xd) | V_SRCHLAT(0x12));
+
+ /*
+ * Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
+ * for ACK- and AOPEN searches.
+ */
+ t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
+ IDT4_CMD_SEARCH144 | 0x3800);
+ t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
+ t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
+ t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
+ t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
+ t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
+ t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);
+
+ t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);
+
+ /* Set DBGI command mode for IDT TCAM. */
+ t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
+
+ /* Set up GMRs */
+ dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
+ for (i = 0; i < 7; ++i)
+ if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
+ goto err;
+
+ for (i = 0; i < 4; ++i)
+ if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
+ goto err;
+
+ dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
+ if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
+ mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
+ mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
+ goto err;
+
+ dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
+ if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
+ goto err;
+
+ /* Set up SCR */
+ dbgi_wr_data3(adap, 0xf0000000, 0, 0);
+ if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
+ goto err;
+
+ return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
+ IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
+err:
+ return -EIO;
+}
+
+/* Put MC5 in DBGI mode. */
+static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
+{
+ t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
+ V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN);
+}
+
+/* Put MC5 in M-Bus mode. */
+static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
+{
+ t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
+ V_TMMODE(mc5->mode == MC5_MODE_72_BIT) |
+ V_COMPEN(mc5->mode == MC5_MODE_72_BIT) |
+ V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
+}
+
+/*
+ * Initialization that requires the OS and protocol layers to already
+ * be intialized goes here.
+ */
+int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
+ unsigned int nroutes)
+{
+ u32 cfg;
+ int err;
+ unsigned int tcam_size = mc5->tcam_size;
+ struct adapter *adap = mc5->adapter;
+
+ if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
+ return -EINVAL;
+
+ /* Reset the TCAM */
+ cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE;
+ cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST;
+ t3_write_reg(adap, A_MC5_DB_CONFIG, cfg);
+ if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
+ CH_ERR(adap, "TCAM reset timed out\n");
+ return -1;
+ }
+
+ t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
+ t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
+ tcam_size - nroutes - nfilters);
+ t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
+ tcam_size - nroutes - nfilters - nservers);
+
+ mc5->parity_enabled = 1;
+
+ /* All the TCAM addresses we access have only the low 32 bits non 0 */
+ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
+ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);
+
+ mc5_dbgi_mode_enable(mc5);
+
+ switch (mc5->part_type) {
+ case IDT75P52100:
+ err = init_idt52100(mc5);
+ break;
+ case IDT75N43102:
+ err = init_idt43102(mc5);
+ break;
+ default:
+ CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
+ err = -EINVAL;
+ break;
+ }
+
+ mc5_dbgi_mode_disable(mc5);
+ return err;
+}
+
+/*
+ * read_mc5_range - dump a part of the memory managed by MC5
+ * @mc5: the MC5 handle
+ * @start: the start address for the dump
+ * @n: number of 72-bit words to read
+ * @buf: result buffer
+ *
+ * Read n 72-bit words from MC5 memory from the given start location.
+ */
+int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
+ unsigned int n, u32 *buf)
+{
+ u32 read_cmd;
+ int err = 0;
+ struct adapter *adap = mc5->adapter;
+
+ if (mc5->part_type == IDT75P52100)
+ read_cmd = IDT_CMD_READ;
+ else if (mc5->part_type == IDT75N43102)
+ read_cmd = IDT4_CMD_READ;
+ else
+ return -EINVAL;
+
+ mc5_dbgi_mode_enable(mc5);
+
+ while (n--) {
+ t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
+ if (mc5_cmd_write(adap, read_cmd)) {
+ err = -EIO;
+ break;
+ }
+ dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
+ buf += 3;
+ }
+
+ mc5_dbgi_mode_disable(mc5);
+ return 0;
+}
+
+#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)
+
+/*
+ * MC5 interrupt handler
+ */
+void t3_mc5_intr_handler(struct mc5 *mc5)
+{
+ struct adapter *adap = mc5->adapter;
+ u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);
+
+ if ((cause & F_PARITYERR) && mc5->parity_enabled) {
+ CH_ALERT(adap, "MC5 parity error\n");
+ mc5->stats.parity_err++;
+ }
+
+ if (cause & F_REQQPARERR) {
+ CH_ALERT(adap, "MC5 request queue parity error\n");
+ mc5->stats.reqq_parity_err++;
+ }
+
+ if (cause & F_DISPQPARERR) {
+ CH_ALERT(adap, "MC5 dispatch queue parity error\n");
+ mc5->stats.dispq_parity_err++;
+ }
+
+ if (cause & F_ACTRGNFULL)
+ mc5->stats.active_rgn_full++;
+ if (cause & F_NFASRCHFAIL)
+ mc5->stats.nfa_srch_err++;
+ if (cause & F_UNKNOWNCMD)
+ mc5->stats.unknown_cmd++;
+ if (cause & F_DELACTEMPTY)
+ mc5->stats.del_act_empty++;
+ if (cause & MC5_INT_FATAL)
+ t3_fatal_err(adap);
+
+ t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
+}
+
+void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
+{
+#define K * 1024
+
+ static unsigned int tcam_part_size[] = { /* in K 72-bit entries */
+ 64 K, 128 K, 256 K, 32 K
+ };
+
+#undef K
+
+ u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);
+
+ mc5->adapter = adapter;
+ mc5->mode = (unsigned char)mode;
+ mc5->part_type = (unsigned char)G_TMTYPE(cfg);
+ if (cfg & F_TMTYPEHI)
+ mc5->part_type |= 4;
+
+ mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
+ if (mode == MC5_MODE_144_BIT)
+ mc5->tcam_size /= 2;
+}
--- /dev/null
+#define A_SG_CONTROL 0x0
+
+#define S_DROPPKT 20
+#define V_DROPPKT(x) ((x) << S_DROPPKT)
+#define F_DROPPKT V_DROPPKT(1U)
+
+#define S_EGRGENCTRL 19
+#define V_EGRGENCTRL(x) ((x) << S_EGRGENCTRL)
+#define F_EGRGENCTRL V_EGRGENCTRL(1U)
+
+#define S_USERSPACESIZE 14
+#define M_USERSPACESIZE 0x1f
+#define V_USERSPACESIZE(x) ((x) << S_USERSPACESIZE)
+
+#define S_HOSTPAGESIZE 11
+#define M_HOSTPAGESIZE 0x7
+#define V_HOSTPAGESIZE(x) ((x) << S_HOSTPAGESIZE)
+
+#define S_FLMODE 9
+#define V_FLMODE(x) ((x) << S_FLMODE)
+#define F_FLMODE V_FLMODE(1U)
+
+#define S_PKTSHIFT 6
+#define M_PKTSHIFT 0x7
+#define V_PKTSHIFT(x) ((x) << S_PKTSHIFT)
+
+#define S_ONEINTMULTQ 5
+#define V_ONEINTMULTQ(x) ((x) << S_ONEINTMULTQ)
+#define F_ONEINTMULTQ V_ONEINTMULTQ(1U)
+
+#define S_BIGENDIANINGRESS 2
+#define V_BIGENDIANINGRESS(x) ((x) << S_BIGENDIANINGRESS)
+#define F_BIGENDIANINGRESS V_BIGENDIANINGRESS(1U)
+
+#define S_ISCSICOALESCING 1
+#define V_ISCSICOALESCING(x) ((x) << S_ISCSICOALESCING)
+#define F_ISCSICOALESCING V_ISCSICOALESCING(1U)
+
+#define S_GLOBALENABLE 0
+#define V_GLOBALENABLE(x) ((x) << S_GLOBALENABLE)
+#define F_GLOBALENABLE V_GLOBALENABLE(1U)
+
+#define S_AVOIDCQOVFL 24
+#define V_AVOIDCQOVFL(x) ((x) << S_AVOIDCQOVFL)
+#define F_AVOIDCQOVFL V_AVOIDCQOVFL(1U)
+
+#define S_OPTONEINTMULTQ 23
+#define V_OPTONEINTMULTQ(x) ((x) << S_OPTONEINTMULTQ)
+#define F_OPTONEINTMULTQ V_OPTONEINTMULTQ(1U)
+
+#define S_CQCRDTCTRL 22
+#define V_CQCRDTCTRL(x) ((x) << S_CQCRDTCTRL)
+#define F_CQCRDTCTRL V_CQCRDTCTRL(1U)
+
+#define A_SG_KDOORBELL 0x4
+
+#define S_SELEGRCNTX 31
+#define V_SELEGRCNTX(x) ((x) << S_SELEGRCNTX)
+#define F_SELEGRCNTX V_SELEGRCNTX(1U)
+
+#define S_EGRCNTX 0
+#define M_EGRCNTX 0xffff
+#define V_EGRCNTX(x) ((x) << S_EGRCNTX)
+
+#define A_SG_GTS 0x8
+
+#define S_RSPQ 29
+#define M_RSPQ 0x7
+#define V_RSPQ(x) ((x) << S_RSPQ)
+#define G_RSPQ(x) (((x) >> S_RSPQ) & M_RSPQ)
+
+#define S_NEWTIMER 16
+#define M_NEWTIMER 0x1fff
+#define V_NEWTIMER(x) ((x) << S_NEWTIMER)
+
+#define S_NEWINDEX 0
+#define M_NEWINDEX 0xffff
+#define V_NEWINDEX(x) ((x) << S_NEWINDEX)
+
+#define A_SG_CONTEXT_CMD 0xc
+
+#define S_CONTEXT_CMD_OPCODE 28
+#define M_CONTEXT_CMD_OPCODE 0xf
+#define V_CONTEXT_CMD_OPCODE(x) ((x) << S_CONTEXT_CMD_OPCODE)
+
+#define S_CONTEXT_CMD_BUSY 27
+#define V_CONTEXT_CMD_BUSY(x) ((x) << S_CONTEXT_CMD_BUSY)
+#define F_CONTEXT_CMD_BUSY V_CONTEXT_CMD_BUSY(1U)
+
+#define S_CQ_CREDIT 20
+
+#define M_CQ_CREDIT 0x7f
+
+#define V_CQ_CREDIT(x) ((x) << S_CQ_CREDIT)
+
+#define G_CQ_CREDIT(x) (((x) >> S_CQ_CREDIT) & M_CQ_CREDIT)
+
+#define S_CQ 19
+
+#define V_CQ(x) ((x) << S_CQ)
+#define F_CQ V_CQ(1U)
+
+#define S_RESPONSEQ 18
+#define V_RESPONSEQ(x) ((x) << S_RESPONSEQ)
+#define F_RESPONSEQ V_RESPONSEQ(1U)
+
+#define S_EGRESS 17
+#define V_EGRESS(x) ((x) << S_EGRESS)
+#define F_EGRESS V_EGRESS(1U)
+
+#define S_FREELIST 16
+#define V_FREELIST(x) ((x) << S_FREELIST)
+#define F_FREELIST V_FREELIST(1U)
+
+#define S_CONTEXT 0
+#define M_CONTEXT 0xffff
+#define V_CONTEXT(x) ((x) << S_CONTEXT)
+
+#define G_CONTEXT(x) (((x) >> S_CONTEXT) & M_CONTEXT)
+
+#define A_SG_CONTEXT_DATA0 0x10
+
+#define A_SG_CONTEXT_DATA1 0x14
+
+#define A_SG_CONTEXT_DATA2 0x18
+
+#define A_SG_CONTEXT_DATA3 0x1c
+
+#define A_SG_CONTEXT_MASK0 0x20
+
+#define A_SG_CONTEXT_MASK1 0x24
+
+#define A_SG_CONTEXT_MASK2 0x28
+
+#define A_SG_CONTEXT_MASK3 0x2c
+
+#define A_SG_RSPQ_CREDIT_RETURN 0x30
+
+#define S_CREDITS 0
+#define M_CREDITS 0xffff
+#define V_CREDITS(x) ((x) << S_CREDITS)
+
+#define A_SG_DATA_INTR 0x34
+
+#define S_ERRINTR 31
+#define V_ERRINTR(x) ((x) << S_ERRINTR)
+#define F_ERRINTR V_ERRINTR(1U)
+
+#define A_SG_HI_DRB_HI_THRSH 0x38
+
+#define A_SG_HI_DRB_LO_THRSH 0x3c
+
+#define A_SG_LO_DRB_HI_THRSH 0x40
+
+#define A_SG_LO_DRB_LO_THRSH 0x44
+
+#define A_SG_RSPQ_FL_STATUS 0x4c
+
+#define S_RSPQ0DISABLED 8
+
+#define A_SG_EGR_RCQ_DRB_THRSH 0x54
+
+#define S_HIRCQDRBTHRSH 16
+#define M_HIRCQDRBTHRSH 0x7ff
+#define V_HIRCQDRBTHRSH(x) ((x) << S_HIRCQDRBTHRSH)
+
+#define S_LORCQDRBTHRSH 0
+#define M_LORCQDRBTHRSH 0x7ff
+#define V_LORCQDRBTHRSH(x) ((x) << S_LORCQDRBTHRSH)
+
+#define A_SG_EGR_CNTX_BADDR 0x58
+
+#define A_SG_INT_CAUSE 0x5c
+
+#define S_RSPQDISABLED 3
+#define V_RSPQDISABLED(x) ((x) << S_RSPQDISABLED)
+#define F_RSPQDISABLED V_RSPQDISABLED(1U)
+
+#define S_RSPQCREDITOVERFOW 2
+#define V_RSPQCREDITOVERFOW(x) ((x) << S_RSPQCREDITOVERFOW)
+#define F_RSPQCREDITOVERFOW V_RSPQCREDITOVERFOW(1U)
+
+#define A_SG_INT_ENABLE 0x60
+
+#define A_SG_CMDQ_CREDIT_TH 0x64
+
+#define S_TIMEOUT 8
+#define M_TIMEOUT 0xffffff
+#define V_TIMEOUT(x) ((x) << S_TIMEOUT)
+
+#define S_THRESHOLD 0
+#define M_THRESHOLD 0xff
+#define V_THRESHOLD(x) ((x) << S_THRESHOLD)
+
+#define A_SG_TIMER_TICK 0x68
+
+#define A_SG_CQ_CONTEXT_BADDR 0x6c
+
+#define A_SG_OCO_BASE 0x70
+
+#define S_BASE1 16
+#define M_BASE1 0xffff
+#define V_BASE1(x) ((x) << S_BASE1)
+
+#define A_SG_DRB_PRI_THRESH 0x74
+
+#define A_PCIX_INT_ENABLE 0x80
+
+#define S_MSIXPARERR 22
+#define M_MSIXPARERR 0x7
+
+#define V_MSIXPARERR(x) ((x) << S_MSIXPARERR)
+
+#define S_CFPARERR 18
+#define M_CFPARERR 0xf
+
+#define V_CFPARERR(x) ((x) << S_CFPARERR)
+
+#define S_RFPARERR 14
+#define M_RFPARERR 0xf
+
+#define V_RFPARERR(x) ((x) << S_RFPARERR)
+
+#define S_WFPARERR 12
+#define M_WFPARERR 0x3
+
+#define V_WFPARERR(x) ((x) << S_WFPARERR)
+
+#define S_PIOPARERR 11
+#define V_PIOPARERR(x) ((x) << S_PIOPARERR)
+#define F_PIOPARERR V_PIOPARERR(1U)
+
+#define S_DETUNCECCERR 10
+#define V_DETUNCECCERR(x) ((x) << S_DETUNCECCERR)
+#define F_DETUNCECCERR V_DETUNCECCERR(1U)
+
+#define S_DETCORECCERR 9
+#define V_DETCORECCERR(x) ((x) << S_DETCORECCERR)
+#define F_DETCORECCERR V_DETCORECCERR(1U)
+
+#define S_RCVSPLCMPERR 8
+#define V_RCVSPLCMPERR(x) ((x) << S_RCVSPLCMPERR)
+#define F_RCVSPLCMPERR V_RCVSPLCMPERR(1U)
+
+#define S_UNXSPLCMP 7
+#define V_UNXSPLCMP(x) ((x) << S_UNXSPLCMP)
+#define F_UNXSPLCMP V_UNXSPLCMP(1U)
+
+#define S_SPLCMPDIS 6
+#define V_SPLCMPDIS(x) ((x) << S_SPLCMPDIS)
+#define F_SPLCMPDIS V_SPLCMPDIS(1U)
+
+#define S_DETPARERR 5
+#define V_DETPARERR(x) ((x) << S_DETPARERR)
+#define F_DETPARERR V_DETPARERR(1U)
+
+#define S_SIGSYSERR 4
+#define V_SIGSYSERR(x) ((x) << S_SIGSYSERR)
+#define F_SIGSYSERR V_SIGSYSERR(1U)
+
+#define S_RCVMSTABT 3
+#define V_RCVMSTABT(x) ((x) << S_RCVMSTABT)
+#define F_RCVMSTABT V_RCVMSTABT(1U)
+
+#define S_RCVTARABT 2
+#define V_RCVTARABT(x) ((x) << S_RCVTARABT)
+#define F_RCVTARABT V_RCVTARABT(1U)
+
+#define S_SIGTARABT 1
+#define V_SIGTARABT(x) ((x) << S_SIGTARABT)
+#define F_SIGTARABT V_SIGTARABT(1U)
+
+#define S_MSTDETPARERR 0
+#define V_MSTDETPARERR(x) ((x) << S_MSTDETPARERR)
+#define F_MSTDETPARERR V_MSTDETPARERR(1U)
+
+#define A_PCIX_INT_CAUSE 0x84
+
+#define A_PCIX_CFG 0x88
+
+#define S_CLIDECEN 18
+#define V_CLIDECEN(x) ((x) << S_CLIDECEN)
+#define F_CLIDECEN V_CLIDECEN(1U)
+
+#define A_PCIX_MODE 0x8c
+
+#define S_PCLKRANGE 6
+#define M_PCLKRANGE 0x3
+#define V_PCLKRANGE(x) ((x) << S_PCLKRANGE)
+#define G_PCLKRANGE(x) (((x) >> S_PCLKRANGE) & M_PCLKRANGE)
+
+#define S_PCIXINITPAT 2
+#define M_PCIXINITPAT 0xf
+#define V_PCIXINITPAT(x) ((x) << S_PCIXINITPAT)
+#define G_PCIXINITPAT(x) (((x) >> S_PCIXINITPAT) & M_PCIXINITPAT)
+
+#define S_64BIT 0
+#define V_64BIT(x) ((x) << S_64BIT)
+#define F_64BIT V_64BIT(1U)
+
+#define A_PCIE_INT_ENABLE 0x80
+
+#define S_BISTERR 15
+#define M_BISTERR 0xff
+
+#define V_BISTERR(x) ((x) << S_BISTERR)
+
+#define S_PCIE_MSIXPARERR 12
+#define M_PCIE_MSIXPARERR 0x7
+
+#define V_PCIE_MSIXPARERR(x) ((x) << S_PCIE_MSIXPARERR)
+
+#define S_PCIE_CFPARERR 11
+#define V_PCIE_CFPARERR(x) ((x) << S_PCIE_CFPARERR)
+#define F_PCIE_CFPARERR V_PCIE_CFPARERR(1U)
+
+#define S_PCIE_RFPARERR 10
+#define V_PCIE_RFPARERR(x) ((x) << S_PCIE_RFPARERR)
+#define F_PCIE_RFPARERR V_PCIE_RFPARERR(1U)
+
+#define S_PCIE_WFPARERR 9
+#define V_PCIE_WFPARERR(x) ((x) << S_PCIE_WFPARERR)
+#define F_PCIE_WFPARERR V_PCIE_WFPARERR(1U)
+
+#define S_PCIE_PIOPARERR 8
+#define V_PCIE_PIOPARERR(x) ((x) << S_PCIE_PIOPARERR)
+#define F_PCIE_PIOPARERR V_PCIE_PIOPARERR(1U)
+
+#define S_UNXSPLCPLERRC 7
+#define V_UNXSPLCPLERRC(x) ((x) << S_UNXSPLCPLERRC)
+#define F_UNXSPLCPLERRC V_UNXSPLCPLERRC(1U)
+
+#define S_UNXSPLCPLERRR 6
+#define V_UNXSPLCPLERRR(x) ((x) << S_UNXSPLCPLERRR)
+#define F_UNXSPLCPLERRR V_UNXSPLCPLERRR(1U)
+
+#define S_PEXERR 0
+#define V_PEXERR(x) ((x) << S_PEXERR)
+#define F_PEXERR V_PEXERR(1U)
+
+#define A_PCIE_INT_CAUSE 0x84
+
+#define A_PCIE_CFG 0x88
+
+#define S_PCIE_CLIDECEN 16
+#define V_PCIE_CLIDECEN(x) ((x) << S_PCIE_CLIDECEN)
+#define F_PCIE_CLIDECEN V_PCIE_CLIDECEN(1U)
+
+#define S_CRSTWRMMODE 0
+#define V_CRSTWRMMODE(x) ((x) << S_CRSTWRMMODE)
+#define F_CRSTWRMMODE V_CRSTWRMMODE(1U)
+
+#define A_PCIE_MODE 0x8c
+
+#define S_NUMFSTTRNSEQRX 10
+#define M_NUMFSTTRNSEQRX 0xff
+#define V_NUMFSTTRNSEQRX(x) ((x) << S_NUMFSTTRNSEQRX)
+#define G_NUMFSTTRNSEQRX(x) (((x) >> S_NUMFSTTRNSEQRX) & M_NUMFSTTRNSEQRX)
+
+#define A_PCIE_PEX_CTRL0 0x98
+
+#define S_NUMFSTTRNSEQ 22
+#define M_NUMFSTTRNSEQ 0xff
+#define V_NUMFSTTRNSEQ(x) ((x) << S_NUMFSTTRNSEQ)
+#define G_NUMFSTTRNSEQ(x) (((x) >> S_NUMFSTTRNSEQ) & M_NUMFSTTRNSEQ)
+
+#define S_REPLAYLMT 2
+#define M_REPLAYLMT 0xfffff
+
+#define V_REPLAYLMT(x) ((x) << S_REPLAYLMT)
+
+#define A_PCIE_PEX_CTRL1 0x9c
+
+#define S_T3A_ACKLAT 0
+#define M_T3A_ACKLAT 0x7ff
+
+#define V_T3A_ACKLAT(x) ((x) << S_T3A_ACKLAT)
+
+#define S_ACKLAT 0
+#define M_ACKLAT 0x1fff
+
+#define V_ACKLAT(x) ((x) << S_ACKLAT)
+
+#define A_PCIE_PEX_ERR 0xa4
+
+#define A_T3DBG_GPIO_EN 0xd0
+
+#define S_GPIO11_OEN 27
+#define V_GPIO11_OEN(x) ((x) << S_GPIO11_OEN)
+#define F_GPIO11_OEN V_GPIO11_OEN(1U)
+
+#define S_GPIO10_OEN 26
+#define V_GPIO10_OEN(x) ((x) << S_GPIO10_OEN)
+#define F_GPIO10_OEN V_GPIO10_OEN(1U)
+
+#define S_GPIO7_OEN 23
+#define V_GPIO7_OEN(x) ((x) << S_GPIO7_OEN)
+#define F_GPIO7_OEN V_GPIO7_OEN(1U)
+
+#define S_GPIO6_OEN 22
+#define V_GPIO6_OEN(x) ((x) << S_GPIO6_OEN)
+#define F_GPIO6_OEN V_GPIO6_OEN(1U)
+
+#define S_GPIO5_OEN 21
+#define V_GPIO5_OEN(x) ((x) << S_GPIO5_OEN)
+#define F_GPIO5_OEN V_GPIO5_OEN(1U)
+
+#define S_GPIO4_OEN 20
+#define V_GPIO4_OEN(x) ((x) << S_GPIO4_OEN)
+#define F_GPIO4_OEN V_GPIO4_OEN(1U)
+
+#define S_GPIO2_OEN 18
+#define V_GPIO2_OEN(x) ((x) << S_GPIO2_OEN)
+#define F_GPIO2_OEN V_GPIO2_OEN(1U)
+
+#define S_GPIO1_OEN 17
+#define V_GPIO1_OEN(x) ((x) << S_GPIO1_OEN)
+#define F_GPIO1_OEN V_GPIO1_OEN(1U)
+
+#define S_GPIO0_OEN 16
+#define V_GPIO0_OEN(x) ((x) << S_GPIO0_OEN)
+#define F_GPIO0_OEN V_GPIO0_OEN(1U)
+
+#define S_GPIO10_OUT_VAL 10
+#define V_GPIO10_OUT_VAL(x) ((x) << S_GPIO10_OUT_VAL)
+#define F_GPIO10_OUT_VAL V_GPIO10_OUT_VAL(1U)
+
+#define S_GPIO7_OUT_VAL 7
+#define V_GPIO7_OUT_VAL(x) ((x) << S_GPIO7_OUT_VAL)
+#define F_GPIO7_OUT_VAL V_GPIO7_OUT_VAL(1U)
+
+#define S_GPIO6_OUT_VAL 6
+#define V_GPIO6_OUT_VAL(x) ((x) << S_GPIO6_OUT_VAL)
+#define F_GPIO6_OUT_VAL V_GPIO6_OUT_VAL(1U)
+
+#define S_GPIO5_OUT_VAL 5
+#define V_GPIO5_OUT_VAL(x) ((x) << S_GPIO5_OUT_VAL)
+#define F_GPIO5_OUT_VAL V_GPIO5_OUT_VAL(1U)
+
+#define S_GPIO4_OUT_VAL 4
+#define V_GPIO4_OUT_VAL(x) ((x) << S_GPIO4_OUT_VAL)
+#define F_GPIO4_OUT_VAL V_GPIO4_OUT_VAL(1U)
+
+#define S_GPIO2_OUT_VAL 2
+#define V_GPIO2_OUT_VAL(x) ((x) << S_GPIO2_OUT_VAL)
+#define F_GPIO2_OUT_VAL V_GPIO2_OUT_VAL(1U)
+
+#define S_GPIO1_OUT_VAL 1
+#define V_GPIO1_OUT_VAL(x) ((x) << S_GPIO1_OUT_VAL)
+#define F_GPIO1_OUT_VAL V_GPIO1_OUT_VAL(1U)
+
+#define S_GPIO0_OUT_VAL 0
+#define V_GPIO0_OUT_VAL(x) ((x) << S_GPIO0_OUT_VAL)
+#define F_GPIO0_OUT_VAL V_GPIO0_OUT_VAL(1U)
+
+#define A_T3DBG_INT_ENABLE 0xd8
+
+#define S_GPIO11 11
+#define V_GPIO11(x) ((x) << S_GPIO11)
+#define F_GPIO11 V_GPIO11(1U)
+
+#define S_GPIO10 10
+#define V_GPIO10(x) ((x) << S_GPIO10)
+#define F_GPIO10 V_GPIO10(1U)
+
+#define S_GPIO7 7
+#define V_GPIO7(x) ((x) << S_GPIO7)
+#define F_GPIO7 V_GPIO7(1U)
+
+#define S_GPIO6 6
+#define V_GPIO6(x) ((x) << S_GPIO6)
+#define F_GPIO6 V_GPIO6(1U)
+
+#define S_GPIO5 5
+#define V_GPIO5(x) ((x) << S_GPIO5)
+#define F_GPIO5 V_GPIO5(1U)
+
+#define S_GPIO4 4
+#define V_GPIO4(x) ((x) << S_GPIO4)
+#define F_GPIO4 V_GPIO4(1U)
+
+#define S_GPIO3 3
+#define V_GPIO3(x) ((x) << S_GPIO3)
+#define F_GPIO3 V_GPIO3(1U)
+
+#define S_GPIO2 2
+#define V_GPIO2(x) ((x) << S_GPIO2)
+#define F_GPIO2 V_GPIO2(1U)
+
+#define S_GPIO1 1
+#define V_GPIO1(x) ((x) << S_GPIO1)
+#define F_GPIO1 V_GPIO1(1U)
+
+#define S_GPIO0 0
+#define V_GPIO0(x) ((x) << S_GPIO0)
+#define F_GPIO0 V_GPIO0(1U)
+
+#define A_T3DBG_INT_CAUSE 0xdc
+
+#define A_T3DBG_GPIO_ACT_LOW 0xf0
+
+#define MC7_PMRX_BASE_ADDR 0x100
+
+#define A_MC7_CFG 0x100
+
+#define S_IFEN 13
+#define V_IFEN(x) ((x) << S_IFEN)
+#define F_IFEN V_IFEN(1U)
+
+#define S_TERM150 11
+#define V_TERM150(x) ((x) << S_TERM150)
+#define F_TERM150 V_TERM150(1U)
+
+#define S_SLOW 10
+#define V_SLOW(x) ((x) << S_SLOW)
+#define F_SLOW V_SLOW(1U)
+
+#define S_WIDTH 8
+#define M_WIDTH 0x3
+#define V_WIDTH(x) ((x) << S_WIDTH)
+#define G_WIDTH(x) (((x) >> S_WIDTH) & M_WIDTH)
+
+#define S_BKS 6
+#define V_BKS(x) ((x) << S_BKS)
+#define F_BKS V_BKS(1U)
+
+#define S_ORG 5
+#define V_ORG(x) ((x) << S_ORG)
+#define F_ORG V_ORG(1U)
+
+#define S_DEN 2
+#define M_DEN 0x7
+#define V_DEN(x) ((x) << S_DEN)
+#define G_DEN(x) (((x) >> S_DEN) & M_DEN)
+
+#define S_RDY 1
+#define V_RDY(x) ((x) << S_RDY)
+#define F_RDY V_RDY(1U)
+
+#define S_CLKEN 0
+#define V_CLKEN(x) ((x) << S_CLKEN)
+#define F_CLKEN V_CLKEN(1U)
+
+#define A_MC7_MODE 0x104
+
+#define S_BUSY 31
+#define V_BUSY(x) ((x) << S_BUSY)
+#define F_BUSY V_BUSY(1U)
+
+#define S_BUSY 31
+#define V_BUSY(x) ((x) << S_BUSY)
+#define F_BUSY V_BUSY(1U)
+
+#define A_MC7_EXT_MODE1 0x108
+
+#define A_MC7_EXT_MODE2 0x10c
+
+#define A_MC7_EXT_MODE3 0x110
+
+#define A_MC7_PRE 0x114
+
+#define A_MC7_REF 0x118
+
+#define S_PREREFDIV 1
+#define M_PREREFDIV 0x3fff
+#define V_PREREFDIV(x) ((x) << S_PREREFDIV)
+
+#define S_PERREFEN 0
+#define V_PERREFEN(x) ((x) << S_PERREFEN)
+#define F_PERREFEN V_PERREFEN(1U)
+
+#define A_MC7_DLL 0x11c
+
+#define S_DLLENB 1
+#define V_DLLENB(x) ((x) << S_DLLENB)
+#define F_DLLENB V_DLLENB(1U)
+
+#define S_DLLRST 0
+#define V_DLLRST(x) ((x) << S_DLLRST)
+#define F_DLLRST V_DLLRST(1U)
+
+#define A_MC7_PARM 0x120
+
+#define S_ACTTOPREDLY 26
+#define M_ACTTOPREDLY 0xf
+#define V_ACTTOPREDLY(x) ((x) << S_ACTTOPREDLY)
+
+#define S_ACTTORDWRDLY 23
+#define M_ACTTORDWRDLY 0x7
+#define V_ACTTORDWRDLY(x) ((x) << S_ACTTORDWRDLY)
+
+#define S_PRECYC 20
+#define M_PRECYC 0x7
+#define V_PRECYC(x) ((x) << S_PRECYC)
+
+#define S_REFCYC 13
+#define M_REFCYC 0x7f
+#define V_REFCYC(x) ((x) << S_REFCYC)
+
+#define S_BKCYC 8
+#define M_BKCYC 0x1f
+#define V_BKCYC(x) ((x) << S_BKCYC)
+
+#define S_WRTORDDLY 4
+#define M_WRTORDDLY 0xf
+#define V_WRTORDDLY(x) ((x) << S_WRTORDDLY)
+
+#define S_RDTOWRDLY 0
+#define M_RDTOWRDLY 0xf
+#define V_RDTOWRDLY(x) ((x) << S_RDTOWRDLY)
+
+#define A_MC7_CAL 0x128
+
+#define S_BUSY 31
+#define V_BUSY(x) ((x) << S_BUSY)
+#define F_BUSY V_BUSY(1U)
+
+#define S_BUSY 31
+#define V_BUSY(x) ((x) << S_BUSY)
+#define F_BUSY V_BUSY(1U)
+
+#define S_CAL_FAULT 30
+#define V_CAL_FAULT(x) ((x) << S_CAL_FAULT)
+#define F_CAL_FAULT V_CAL_FAULT(1U)
+
+#define S_SGL_CAL_EN 20
+#define V_SGL_CAL_EN(x) ((x) << S_SGL_CAL_EN)
+#define F_SGL_CAL_EN V_SGL_CAL_EN(1U)
+
+#define A_MC7_ERR_ADDR 0x12c
+
+#define A_MC7_ECC 0x130
+
+#define S_ECCCHKEN 1
+#define V_ECCCHKEN(x) ((x) << S_ECCCHKEN)
+#define F_ECCCHKEN V_ECCCHKEN(1U)
+
+#define S_ECCGENEN 0
+#define V_ECCGENEN(x) ((x) << S_ECCGENEN)
+#define F_ECCGENEN V_ECCGENEN(1U)
+
+#define A_MC7_CE_ADDR 0x134
+
+#define A_MC7_CE_DATA0 0x138
+
+#define A_MC7_CE_DATA1 0x13c
+
+#define A_MC7_CE_DATA2 0x140
+
+#define S_DATA 0
+#define M_DATA 0xff
+
+#define G_DATA(x) (((x) >> S_DATA) & M_DATA)
+
+#define A_MC7_UE_ADDR 0x144
+
+#define A_MC7_UE_DATA0 0x148
+
+#define A_MC7_UE_DATA1 0x14c
+
+#define A_MC7_UE_DATA2 0x150
+
+#define A_MC7_BD_ADDR 0x154
+
+#define S_ADDR 3
+
+#define M_ADDR 0x1fffffff
+
+#define A_MC7_BD_DATA0 0x158
+
+#define A_MC7_BD_DATA1 0x15c
+
+#define A_MC7_BD_OP 0x164
+
+#define S_OP 0
+
+#define V_OP(x) ((x) << S_OP)
+#define F_OP V_OP(1U)
+
+#define F_OP V_OP(1U)
+#define A_SF_OP 0x6dc
+
+#define A_MC7_BIST_ADDR_BEG 0x168
+
+#define A_MC7_BIST_ADDR_END 0x16c
+
+#define A_MC7_BIST_DATA 0x170
+
+#define A_MC7_BIST_OP 0x174
+
+#define S_CONT 3
+#define V_CONT(x) ((x) << S_CONT)
+#define F_CONT V_CONT(1U)
+
+#define F_CONT V_CONT(1U)
+
+#define A_MC7_INT_ENABLE 0x178
+
+#define S_AE 17
+#define V_AE(x) ((x) << S_AE)
+#define F_AE V_AE(1U)
+
+#define S_PE 2
+#define M_PE 0x7fff
+
+#define V_PE(x) ((x) << S_PE)
+
+#define G_PE(x) (((x) >> S_PE) & M_PE)
+
+#define S_UE 1
+#define V_UE(x) ((x) << S_UE)
+#define F_UE V_UE(1U)
+
+#define S_CE 0
+#define V_CE(x) ((x) << S_CE)
+#define F_CE V_CE(1U)
+
+#define A_MC7_INT_CAUSE 0x17c
+
+#define MC7_PMTX_BASE_ADDR 0x180
+
+#define MC7_CM_BASE_ADDR 0x200
+
+#define A_CIM_BOOT_CFG 0x280
+
+#define S_BOOTADDR 2
+#define M_BOOTADDR 0x3fffffff
+#define V_BOOTADDR(x) ((x) << S_BOOTADDR)
+
+#define A_CIM_SDRAM_BASE_ADDR 0x28c
+
+#define A_CIM_SDRAM_ADDR_SIZE 0x290
+
+#define A_CIM_HOST_INT_ENABLE 0x298
+
+#define A_CIM_HOST_INT_CAUSE 0x29c
+
+#define S_BLKWRPLINT 12
+#define V_BLKWRPLINT(x) ((x) << S_BLKWRPLINT)
+#define F_BLKWRPLINT V_BLKWRPLINT(1U)
+
+#define S_BLKRDPLINT 11
+#define V_BLKRDPLINT(x) ((x) << S_BLKRDPLINT)
+#define F_BLKRDPLINT V_BLKRDPLINT(1U)
+
+#define S_BLKWRCTLINT 10
+#define V_BLKWRCTLINT(x) ((x) << S_BLKWRCTLINT)
+#define F_BLKWRCTLINT V_BLKWRCTLINT(1U)
+
+#define S_BLKRDCTLINT 9
+#define V_BLKRDCTLINT(x) ((x) << S_BLKRDCTLINT)
+#define F_BLKRDCTLINT V_BLKRDCTLINT(1U)
+
+#define S_BLKWRFLASHINT 8
+#define V_BLKWRFLASHINT(x) ((x) << S_BLKWRFLASHINT)
+#define F_BLKWRFLASHINT V_BLKWRFLASHINT(1U)
+
+#define S_BLKRDFLASHINT 7
+#define V_BLKRDFLASHINT(x) ((x) << S_BLKRDFLASHINT)
+#define F_BLKRDFLASHINT V_BLKRDFLASHINT(1U)
+
+#define S_SGLWRFLASHINT 6
+#define V_SGLWRFLASHINT(x) ((x) << S_SGLWRFLASHINT)
+#define F_SGLWRFLASHINT V_SGLWRFLASHINT(1U)
+
+#define S_WRBLKFLASHINT 5
+#define V_WRBLKFLASHINT(x) ((x) << S_WRBLKFLASHINT)
+#define F_WRBLKFLASHINT V_WRBLKFLASHINT(1U)
+
+#define S_BLKWRBOOTINT 4
+#define V_BLKWRBOOTINT(x) ((x) << S_BLKWRBOOTINT)
+#define F_BLKWRBOOTINT V_BLKWRBOOTINT(1U)
+
+#define S_FLASHRANGEINT 2
+#define V_FLASHRANGEINT(x) ((x) << S_FLASHRANGEINT)
+#define F_FLASHRANGEINT V_FLASHRANGEINT(1U)
+
+#define S_SDRAMRANGEINT 1
+#define V_SDRAMRANGEINT(x) ((x) << S_SDRAMRANGEINT)
+#define F_SDRAMRANGEINT V_SDRAMRANGEINT(1U)
+
+#define S_RSVDSPACEINT 0
+#define V_RSVDSPACEINT(x) ((x) << S_RSVDSPACEINT)
+#define F_RSVDSPACEINT V_RSVDSPACEINT(1U)
+
+#define A_CIM_HOST_ACC_CTRL 0x2b0
+
+#define S_HOSTBUSY 17
+#define V_HOSTBUSY(x) ((x) << S_HOSTBUSY)
+#define F_HOSTBUSY V_HOSTBUSY(1U)
+
+#define A_CIM_HOST_ACC_DATA 0x2b4
+
+#define A_TP_IN_CONFIG 0x300
+
+#define S_NICMODE 14
+#define V_NICMODE(x) ((x) << S_NICMODE)
+#define F_NICMODE V_NICMODE(1U)
+
+#define F_NICMODE V_NICMODE(1U)
+
+#define S_IPV6ENABLE 15
+#define V_IPV6ENABLE(x) ((x) << S_IPV6ENABLE)
+#define F_IPV6ENABLE V_IPV6ENABLE(1U)
+
+#define A_TP_OUT_CONFIG 0x304
+
+#define S_VLANEXTRACTIONENABLE 12
+
+#define A_TP_GLOBAL_CONFIG 0x308
+
+#define S_TXPACINGENABLE 24
+#define V_TXPACINGENABLE(x) ((x) << S_TXPACINGENABLE)
+#define F_TXPACINGENABLE V_TXPACINGENABLE(1U)
+
+#define S_PATHMTU 15
+#define V_PATHMTU(x) ((x) << S_PATHMTU)
+#define F_PATHMTU V_PATHMTU(1U)
+
+#define S_IPCHECKSUMOFFLOAD 13
+#define V_IPCHECKSUMOFFLOAD(x) ((x) << S_IPCHECKSUMOFFLOAD)
+#define F_IPCHECKSUMOFFLOAD V_IPCHECKSUMOFFLOAD(1U)
+
+#define S_UDPCHECKSUMOFFLOAD 12
+#define V_UDPCHECKSUMOFFLOAD(x) ((x) << S_UDPCHECKSUMOFFLOAD)
+#define F_UDPCHECKSUMOFFLOAD V_UDPCHECKSUMOFFLOAD(1U)
+
+#define S_TCPCHECKSUMOFFLOAD 11
+#define V_TCPCHECKSUMOFFLOAD(x) ((x) << S_TCPCHECKSUMOFFLOAD)
+#define F_TCPCHECKSUMOFFLOAD V_TCPCHECKSUMOFFLOAD(1U)
+
+#define S_IPTTL 0
+#define M_IPTTL 0xff
+#define V_IPTTL(x) ((x) << S_IPTTL)
+
+#define A_TP_CMM_MM_BASE 0x314
+
+#define A_TP_CMM_TIMER_BASE 0x318
+
+#define S_CMTIMERMAXNUM 28
+#define M_CMTIMERMAXNUM 0x3
+#define V_CMTIMERMAXNUM(x) ((x) << S_CMTIMERMAXNUM)
+
+#define A_TP_PMM_SIZE 0x31c
+
+#define A_TP_PMM_TX_BASE 0x320
+
+#define A_TP_PMM_RX_BASE 0x328
+
+#define A_TP_PMM_RX_PAGE_SIZE 0x32c
+
+#define A_TP_PMM_RX_MAX_PAGE 0x330
+
+#define A_TP_PMM_TX_PAGE_SIZE 0x334
+
+#define A_TP_PMM_TX_MAX_PAGE 0x338
+
+#define A_TP_TCP_OPTIONS 0x340
+
+#define S_MTUDEFAULT 16
+#define M_MTUDEFAULT 0xffff
+#define V_MTUDEFAULT(x) ((x) << S_MTUDEFAULT)
+
+#define S_MTUENABLE 10
+#define V_MTUENABLE(x) ((x) << S_MTUENABLE)
+#define F_MTUENABLE V_MTUENABLE(1U)
+
+#define S_SACKRX 8
+#define V_SACKRX(x) ((x) << S_SACKRX)
+#define F_SACKRX V_SACKRX(1U)
+
+#define S_SACKMODE 4
+
+#define M_SACKMODE 0x3
+
+#define V_SACKMODE(x) ((x) << S_SACKMODE)
+
+#define S_WINDOWSCALEMODE 2
+#define M_WINDOWSCALEMODE 0x3
+#define V_WINDOWSCALEMODE(x) ((x) << S_WINDOWSCALEMODE)
+
+#define S_TIMESTAMPSMODE 0
+
+#define M_TIMESTAMPSMODE 0x3
+
+#define V_TIMESTAMPSMODE(x) ((x) << S_TIMESTAMPSMODE)
+
+#define A_TP_DACK_CONFIG 0x344
+
+#define S_AUTOSTATE3 30
+#define M_AUTOSTATE3 0x3
+#define V_AUTOSTATE3(x) ((x) << S_AUTOSTATE3)
+
+#define S_AUTOSTATE2 28
+#define M_AUTOSTATE2 0x3
+#define V_AUTOSTATE2(x) ((x) << S_AUTOSTATE2)
+
+#define S_AUTOSTATE1 26
+#define M_AUTOSTATE1 0x3
+#define V_AUTOSTATE1(x) ((x) << S_AUTOSTATE1)
+
+#define S_BYTETHRESHOLD 5
+#define M_BYTETHRESHOLD 0xfffff
+#define V_BYTETHRESHOLD(x) ((x) << S_BYTETHRESHOLD)
+
+#define S_MSSTHRESHOLD 3
+#define M_MSSTHRESHOLD 0x3
+#define V_MSSTHRESHOLD(x) ((x) << S_MSSTHRESHOLD)
+
+#define S_AUTOCAREFUL 2
+#define V_AUTOCAREFUL(x) ((x) << S_AUTOCAREFUL)
+#define F_AUTOCAREFUL V_AUTOCAREFUL(1U)
+
+#define S_AUTOENABLE 1
+#define V_AUTOENABLE(x) ((x) << S_AUTOENABLE)
+#define F_AUTOENABLE V_AUTOENABLE(1U)
+
+#define S_DACK_MODE 0
+#define V_DACK_MODE(x) ((x) << S_DACK_MODE)
+#define F_DACK_MODE V_DACK_MODE(1U)
+
+#define A_TP_PC_CONFIG 0x348
+
+#define S_TXTOSQUEUEMAPMODE 26
+#define V_TXTOSQUEUEMAPMODE(x) ((x) << S_TXTOSQUEUEMAPMODE)
+#define F_TXTOSQUEUEMAPMODE V_TXTOSQUEUEMAPMODE(1U)
+
+#define S_ENABLEEPCMDAFULL 23
+#define V_ENABLEEPCMDAFULL(x) ((x) << S_ENABLEEPCMDAFULL)
+#define F_ENABLEEPCMDAFULL V_ENABLEEPCMDAFULL(1U)
+
+#define S_MODULATEUNIONMODE 22
+#define V_MODULATEUNIONMODE(x) ((x) << S_MODULATEUNIONMODE)
+#define F_MODULATEUNIONMODE V_MODULATEUNIONMODE(1U)
+
+#define S_TXDEFERENABLE 20
+#define V_TXDEFERENABLE(x) ((x) << S_TXDEFERENABLE)
+#define F_TXDEFERENABLE V_TXDEFERENABLE(1U)
+
+#define S_RXCONGESTIONMODE 19
+#define V_RXCONGESTIONMODE(x) ((x) << S_RXCONGESTIONMODE)
+#define F_RXCONGESTIONMODE V_RXCONGESTIONMODE(1U)
+
+#define S_HEARBEATDACK 16
+#define V_HEARBEATDACK(x) ((x) << S_HEARBEATDACK)
+#define F_HEARBEATDACK V_HEARBEATDACK(1U)
+
+#define S_TXCONGESTIONMODE 15
+#define V_TXCONGESTIONMODE(x) ((x) << S_TXCONGESTIONMODE)
+#define F_TXCONGESTIONMODE V_TXCONGESTIONMODE(1U)
+
+#define S_ENABLEOCSPIFULL 30
+#define V_ENABLEOCSPIFULL(x) ((x) << S_ENABLEOCSPIFULL)
+#define F_ENABLEOCSPIFULL V_ENABLEOCSPIFULL(1U)
+
+#define S_LOCKTID 28
+#define V_LOCKTID(x) ((x) << S_LOCKTID)
+#define F_LOCKTID V_LOCKTID(1U)
+
+#define A_TP_PC_CONFIG2 0x34c
+
+#define S_CHDRAFULL 4
+#define V_CHDRAFULL(x) ((x) << S_CHDRAFULL)
+#define F_CHDRAFULL V_CHDRAFULL(1U)
+
+#define A_TP_TCP_BACKOFF_REG0 0x350
+
+#define A_TP_TCP_BACKOFF_REG1 0x354
+
+#define A_TP_TCP_BACKOFF_REG2 0x358
+
+#define A_TP_TCP_BACKOFF_REG3 0x35c
+
+#define A_TP_PARA_REG2 0x368
+
+#define S_MAXRXDATA 16
+#define M_MAXRXDATA 0xffff
+#define V_MAXRXDATA(x) ((x) << S_MAXRXDATA)
+
+#define S_RXCOALESCESIZE 0
+#define M_RXCOALESCESIZE 0xffff
+#define V_RXCOALESCESIZE(x) ((x) << S_RXCOALESCESIZE)
+
+#define A_TP_PARA_REG3 0x36c
+
+#define S_TXDATAACKIDX 16
+#define M_TXDATAACKIDX 0xf
+
+#define V_TXDATAACKIDX(x) ((x) << S_TXDATAACKIDX)
+
+#define S_TXPACEAUTOSTRICT 10
+#define V_TXPACEAUTOSTRICT(x) ((x) << S_TXPACEAUTOSTRICT)
+#define F_TXPACEAUTOSTRICT V_TXPACEAUTOSTRICT(1U)
+
+#define S_TXPACEFIXED 9
+#define V_TXPACEFIXED(x) ((x) << S_TXPACEFIXED)
+#define F_TXPACEFIXED V_TXPACEFIXED(1U)
+
+#define S_TXPACEAUTO 8
+#define V_TXPACEAUTO(x) ((x) << S_TXPACEAUTO)
+#define F_TXPACEAUTO V_TXPACEAUTO(1U)
+
+#define S_RXCOALESCEENABLE 1
+#define V_RXCOALESCEENABLE(x) ((x) << S_RXCOALESCEENABLE)
+#define F_RXCOALESCEENABLE V_RXCOALESCEENABLE(1U)
+
+#define S_RXCOALESCEPSHEN 0
+#define V_RXCOALESCEPSHEN(x) ((x) << S_RXCOALESCEPSHEN)
+#define F_RXCOALESCEPSHEN V_RXCOALESCEPSHEN(1U)
+
+#define A_TP_PARA_REG4 0x370
+
+#define A_TP_PARA_REG6 0x378
+
+#define S_T3A_ENABLEESND 13
+#define V_T3A_ENABLEESND(x) ((x) << S_T3A_ENABLEESND)
+#define F_T3A_ENABLEESND V_T3A_ENABLEESND(1U)
+
+#define S_ENABLEESND 11
+#define V_ENABLEESND(x) ((x) << S_ENABLEESND)
+#define F_ENABLEESND V_ENABLEESND(1U)
+
+#define A_TP_PARA_REG7 0x37c
+
+#define S_PMMAXXFERLEN1 16
+#define M_PMMAXXFERLEN1 0xffff
+#define V_PMMAXXFERLEN1(x) ((x) << S_PMMAXXFERLEN1)
+
+#define S_PMMAXXFERLEN0 0
+#define M_PMMAXXFERLEN0 0xffff
+#define V_PMMAXXFERLEN0(x) ((x) << S_PMMAXXFERLEN0)
+
+#define A_TP_TIMER_RESOLUTION 0x390
+
+#define S_TIMERRESOLUTION 16
+#define M_TIMERRESOLUTION 0xff
+#define V_TIMERRESOLUTION(x) ((x) << S_TIMERRESOLUTION)
+
+#define S_TIMESTAMPRESOLUTION 8
+#define M_TIMESTAMPRESOLUTION 0xff
+#define V_TIMESTAMPRESOLUTION(x) ((x) << S_TIMESTAMPRESOLUTION)
+
+#define S_DELAYEDACKRESOLUTION 0
+#define M_DELAYEDACKRESOLUTION 0xff
+#define V_DELAYEDACKRESOLUTION(x) ((x) << S_DELAYEDACKRESOLUTION)
+
+#define A_TP_MSL 0x394
+
+#define A_TP_RXT_MIN 0x398
+
+#define A_TP_RXT_MAX 0x39c
+
+#define A_TP_PERS_MIN 0x3a0
+
+#define A_TP_PERS_MAX 0x3a4
+
+#define A_TP_KEEP_IDLE 0x3a8
+
+#define A_TP_KEEP_INTVL 0x3ac
+
+#define A_TP_INIT_SRTT 0x3b0
+
+#define A_TP_DACK_TIMER 0x3b4
+
+#define A_TP_FINWAIT2_TIMER 0x3b8
+
+#define A_TP_SHIFT_CNT 0x3c0
+
+#define S_SYNSHIFTMAX 24
+
+#define M_SYNSHIFTMAX 0xff
+
+#define V_SYNSHIFTMAX(x) ((x) << S_SYNSHIFTMAX)
+
+#define S_RXTSHIFTMAXR1 20
+
+#define M_RXTSHIFTMAXR1 0xf
+
+#define V_RXTSHIFTMAXR1(x) ((x) << S_RXTSHIFTMAXR1)
+
+#define S_RXTSHIFTMAXR2 16
+
+#define M_RXTSHIFTMAXR2 0xf
+
+#define V_RXTSHIFTMAXR2(x) ((x) << S_RXTSHIFTMAXR2)
+
+#define S_PERSHIFTBACKOFFMAX 12
+#define M_PERSHIFTBACKOFFMAX 0xf
+#define V_PERSHIFTBACKOFFMAX(x) ((x) << S_PERSHIFTBACKOFFMAX)
+
+#define S_PERSHIFTMAX 8
+#define M_PERSHIFTMAX 0xf
+#define V_PERSHIFTMAX(x) ((x) << S_PERSHIFTMAX)
+
+#define S_KEEPALIVEMAX 0
+
+#define M_KEEPALIVEMAX 0xff
+
+#define V_KEEPALIVEMAX(x) ((x) << S_KEEPALIVEMAX)
+
+#define A_TP_MTU_PORT_TABLE 0x3d0
+
+#define A_TP_CCTRL_TABLE 0x3dc
+
+#define A_TP_MTU_TABLE 0x3e4
+
+#define A_TP_RSS_MAP_TABLE 0x3e8
+
+#define A_TP_RSS_LKP_TABLE 0x3ec
+
+#define A_TP_RSS_CONFIG 0x3f0
+
+#define S_TNL4TUPEN 29
+#define V_TNL4TUPEN(x) ((x) << S_TNL4TUPEN)
+#define F_TNL4TUPEN V_TNL4TUPEN(1U)
+
+#define S_TNL2TUPEN 28
+#define V_TNL2TUPEN(x) ((x) << S_TNL2TUPEN)
+#define F_TNL2TUPEN V_TNL2TUPEN(1U)
+
+#define S_TNLPRTEN 26
+#define V_TNLPRTEN(x) ((x) << S_TNLPRTEN)
+#define F_TNLPRTEN V_TNLPRTEN(1U)
+
+#define S_TNLMAPEN 25
+#define V_TNLMAPEN(x) ((x) << S_TNLMAPEN)
+#define F_TNLMAPEN V_TNLMAPEN(1U)
+
+#define S_TNLLKPEN 24
+#define V_TNLLKPEN(x) ((x) << S_TNLLKPEN)
+#define F_TNLLKPEN V_TNLLKPEN(1U)
+
+#define S_RRCPLCPUSIZE 4
+#define M_RRCPLCPUSIZE 0x7
+#define V_RRCPLCPUSIZE(x) ((x) << S_RRCPLCPUSIZE)
+
+#define S_RQFEEDBACKENABLE 3
+#define V_RQFEEDBACKENABLE(x) ((x) << S_RQFEEDBACKENABLE)
+#define F_RQFEEDBACKENABLE V_RQFEEDBACKENABLE(1U)
+
+#define S_DISABLE 0
+
+#define A_TP_TM_PIO_ADDR 0x418
+
+#define A_TP_TM_PIO_DATA 0x41c
+
+#define A_TP_TX_MOD_QUE_TABLE 0x420
+
+#define A_TP_TX_RESOURCE_LIMIT 0x424
+
+#define A_TP_TX_MOD_QUEUE_REQ_MAP 0x428
+
+#define S_TX_MOD_QUEUE_REQ_MAP 0
+#define M_TX_MOD_QUEUE_REQ_MAP 0xff
+#define V_TX_MOD_QUEUE_REQ_MAP(x) ((x) << S_TX_MOD_QUEUE_REQ_MAP)
+
+#define A_TP_TX_MOD_QUEUE_WEIGHT1 0x42c
+
+#define A_TP_TX_MOD_QUEUE_WEIGHT0 0x430
+
+#define A_TP_MOD_CHANNEL_WEIGHT 0x434
+
+#define A_TP_PIO_ADDR 0x440
+
+#define A_TP_PIO_DATA 0x444
+
+#define A_TP_RESET 0x44c
+
+#define S_FLSTINITENABLE 1
+#define V_FLSTINITENABLE(x) ((x) << S_FLSTINITENABLE)
+#define F_FLSTINITENABLE V_FLSTINITENABLE(1U)
+
+#define S_TPRESET 0
+#define V_TPRESET(x) ((x) << S_TPRESET)
+#define F_TPRESET V_TPRESET(1U)
+
+#define A_TP_CMM_MM_RX_FLST_BASE 0x460
+
+#define A_TP_CMM_MM_TX_FLST_BASE 0x464
+
+#define A_TP_CMM_MM_PS_FLST_BASE 0x468
+
+#define A_TP_MIB_INDEX 0x450
+
+#define A_TP_MIB_RDATA 0x454
+
+#define A_TP_CMM_MM_MAX_PSTRUCT 0x46c
+
+#define A_TP_INT_ENABLE 0x470
+
+#define A_TP_INT_CAUSE 0x474
+
+#define A_TP_TX_MOD_Q1_Q0_RATE_LIMIT 0x8
+
+#define A_TP_TX_DROP_CFG_CH0 0x12b
+
+#define A_TP_TX_DROP_MODE 0x12f
+
+#define A_TP_EGRESS_CONFIG 0x145
+
+#define S_REWRITEFORCETOSIZE 0
+#define V_REWRITEFORCETOSIZE(x) ((x) << S_REWRITEFORCETOSIZE)
+#define F_REWRITEFORCETOSIZE V_REWRITEFORCETOSIZE(1U)
+
+#define A_TP_TX_TRC_KEY0 0x20
+
+#define A_TP_RX_TRC_KEY0 0x120
+
+#define A_ULPRX_CTL 0x500
+
+#define S_ROUND_ROBIN 4
+#define V_ROUND_ROBIN(x) ((x) << S_ROUND_ROBIN)
+#define F_ROUND_ROBIN V_ROUND_ROBIN(1U)
+
+#define A_ULPRX_INT_ENABLE 0x504
+
+#define S_PARERR 0
+#define V_PARERR(x) ((x) << S_PARERR)
+#define F_PARERR V_PARERR(1U)
+
+#define A_ULPRX_INT_CAUSE 0x508
+
+#define A_ULPRX_ISCSI_LLIMIT 0x50c
+
+#define A_ULPRX_ISCSI_ULIMIT 0x510
+
+#define A_ULPRX_ISCSI_TAGMASK 0x514
+
+#define A_ULPRX_TDDP_LLIMIT 0x51c
+
+#define A_ULPRX_TDDP_ULIMIT 0x520
+
+#define A_ULPRX_STAG_LLIMIT 0x52c
+
+#define A_ULPRX_STAG_ULIMIT 0x530
+
+#define A_ULPRX_RQ_LLIMIT 0x534
+#define A_ULPRX_RQ_LLIMIT 0x534
+
+#define A_ULPRX_RQ_ULIMIT 0x538
+#define A_ULPRX_RQ_ULIMIT 0x538
+
+#define A_ULPRX_PBL_LLIMIT 0x53c
+
+#define A_ULPRX_PBL_ULIMIT 0x540
+#define A_ULPRX_PBL_ULIMIT 0x540
+
+#define A_ULPRX_TDDP_TAGMASK 0x524
+
+#define A_ULPRX_RQ_LLIMIT 0x534
+#define A_ULPRX_RQ_LLIMIT 0x534
+
+#define A_ULPRX_RQ_ULIMIT 0x538
+#define A_ULPRX_RQ_ULIMIT 0x538
+
+#define A_ULPRX_PBL_ULIMIT 0x540
+#define A_ULPRX_PBL_ULIMIT 0x540
+
+#define A_ULPTX_CONFIG 0x580
+
+#define S_CFG_RR_ARB 0
+#define V_CFG_RR_ARB(x) ((x) << S_CFG_RR_ARB)
+#define F_CFG_RR_ARB V_CFG_RR_ARB(1U)
+
+#define A_ULPTX_INT_ENABLE 0x584
+
+#define S_PBL_BOUND_ERR_CH1 1
+#define V_PBL_BOUND_ERR_CH1(x) ((x) << S_PBL_BOUND_ERR_CH1)
+#define F_PBL_BOUND_ERR_CH1 V_PBL_BOUND_ERR_CH1(1U)
+
+#define S_PBL_BOUND_ERR_CH0 0
+#define V_PBL_BOUND_ERR_CH0(x) ((x) << S_PBL_BOUND_ERR_CH0)
+#define F_PBL_BOUND_ERR_CH0 V_PBL_BOUND_ERR_CH0(1U)
+
+#define A_ULPTX_INT_CAUSE 0x588
+
+#define A_ULPTX_TPT_LLIMIT 0x58c
+
+#define A_ULPTX_TPT_ULIMIT 0x590
+
+#define A_ULPTX_PBL_LLIMIT 0x594
+
+#define A_ULPTX_PBL_ULIMIT 0x598
+
+#define A_ULPTX_DMA_WEIGHT 0x5ac
+
+#define S_D1_WEIGHT 16
+#define M_D1_WEIGHT 0xffff
+#define V_D1_WEIGHT(x) ((x) << S_D1_WEIGHT)
+
+#define S_D0_WEIGHT 0
+#define M_D0_WEIGHT 0xffff
+#define V_D0_WEIGHT(x) ((x) << S_D0_WEIGHT)
+
+#define A_PM1_RX_CFG 0x5c0
+
+#define A_PM1_RX_INT_ENABLE 0x5d8
+
+#define S_ZERO_E_CMD_ERROR 18
+#define V_ZERO_E_CMD_ERROR(x) ((x) << S_ZERO_E_CMD_ERROR)
+#define F_ZERO_E_CMD_ERROR V_ZERO_E_CMD_ERROR(1U)
+
+#define S_IESPI0_FIFO2X_RX_FRAMING_ERROR 17
+#define V_IESPI0_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_IESPI0_FIFO2X_RX_FRAMING_ERROR)
+#define F_IESPI0_FIFO2X_RX_FRAMING_ERROR V_IESPI0_FIFO2X_RX_FRAMING_ERROR(1U)
+
+#define S_IESPI1_FIFO2X_RX_FRAMING_ERROR 16
+#define V_IESPI1_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_IESPI1_FIFO2X_RX_FRAMING_ERROR)
+#define F_IESPI1_FIFO2X_RX_FRAMING_ERROR V_IESPI1_FIFO2X_RX_FRAMING_ERROR(1U)
+
+#define S_IESPI0_RX_FRAMING_ERROR 15
+#define V_IESPI0_RX_FRAMING_ERROR(x) ((x) << S_IESPI0_RX_FRAMING_ERROR)
+#define F_IESPI0_RX_FRAMING_ERROR V_IESPI0_RX_FRAMING_ERROR(1U)
+
+#define S_IESPI1_RX_FRAMING_ERROR 14
+#define V_IESPI1_RX_FRAMING_ERROR(x) ((x) << S_IESPI1_RX_FRAMING_ERROR)
+#define F_IESPI1_RX_FRAMING_ERROR V_IESPI1_RX_FRAMING_ERROR(1U)
+
+#define S_IESPI0_TX_FRAMING_ERROR 13
+#define V_IESPI0_TX_FRAMING_ERROR(x) ((x) << S_IESPI0_TX_FRAMING_ERROR)
+#define F_IESPI0_TX_FRAMING_ERROR V_IESPI0_TX_FRAMING_ERROR(1U)
+
+#define S_IESPI1_TX_FRAMING_ERROR 12
+#define V_IESPI1_TX_FRAMING_ERROR(x) ((x) << S_IESPI1_TX_FRAMING_ERROR)
+#define F_IESPI1_TX_FRAMING_ERROR V_IESPI1_TX_FRAMING_ERROR(1U)
+
+#define S_OCSPI0_RX_FRAMING_ERROR 11
+#define V_OCSPI0_RX_FRAMING_ERROR(x) ((x) << S_OCSPI0_RX_FRAMING_ERROR)
+#define F_OCSPI0_RX_FRAMING_ERROR V_OCSPI0_RX_FRAMING_ERROR(1U)
+
+#define S_OCSPI1_RX_FRAMING_ERROR 10
+#define V_OCSPI1_RX_FRAMING_ERROR(x) ((x) << S_OCSPI1_RX_FRAMING_ERROR)
+#define F_OCSPI1_RX_FRAMING_ERROR V_OCSPI1_RX_FRAMING_ERROR(1U)
+
+#define S_OCSPI0_TX_FRAMING_ERROR 9
+#define V_OCSPI0_TX_FRAMING_ERROR(x) ((x) << S_OCSPI0_TX_FRAMING_ERROR)
+#define F_OCSPI0_TX_FRAMING_ERROR V_OCSPI0_TX_FRAMING_ERROR(1U)
+
+#define S_OCSPI1_TX_FRAMING_ERROR 8
+#define V_OCSPI1_TX_FRAMING_ERROR(x) ((x) << S_OCSPI1_TX_FRAMING_ERROR)
+#define F_OCSPI1_TX_FRAMING_ERROR V_OCSPI1_TX_FRAMING_ERROR(1U)
+
+#define S_OCSPI0_OFIFO2X_TX_FRAMING_ERROR 7
+#define V_OCSPI0_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OCSPI0_OFIFO2X_TX_FRAMING_ERROR)
+#define F_OCSPI0_OFIFO2X_TX_FRAMING_ERROR V_OCSPI0_OFIFO2X_TX_FRAMING_ERROR(1U)
+
+#define S_OCSPI1_OFIFO2X_TX_FRAMING_ERROR 6
+#define V_OCSPI1_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OCSPI1_OFIFO2X_TX_FRAMING_ERROR)
+#define F_OCSPI1_OFIFO2X_TX_FRAMING_ERROR V_OCSPI1_OFIFO2X_TX_FRAMING_ERROR(1U)
+
+#define S_IESPI_PAR_ERROR 3
+#define M_IESPI_PAR_ERROR 0x7
+
+#define V_IESPI_PAR_ERROR(x) ((x) << S_IESPI_PAR_ERROR)
+
+#define S_OCSPI_PAR_ERROR 0
+#define M_OCSPI_PAR_ERROR 0x7
+
+#define V_OCSPI_PAR_ERROR(x) ((x) << S_OCSPI_PAR_ERROR)
+
+#define A_PM1_RX_INT_CAUSE 0x5dc
+
+#define A_PM1_TX_CFG 0x5e0
+
+#define A_PM1_TX_INT_ENABLE 0x5f8
+
+#define S_ZERO_C_CMD_ERROR 18
+#define V_ZERO_C_CMD_ERROR(x) ((x) << S_ZERO_C_CMD_ERROR)
+#define F_ZERO_C_CMD_ERROR V_ZERO_C_CMD_ERROR(1U)
+
+#define S_ICSPI0_FIFO2X_RX_FRAMING_ERROR 17
+#define V_ICSPI0_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_ICSPI0_FIFO2X_RX_FRAMING_ERROR)
+#define F_ICSPI0_FIFO2X_RX_FRAMING_ERROR V_ICSPI0_FIFO2X_RX_FRAMING_ERROR(1U)
+
+#define S_ICSPI1_FIFO2X_RX_FRAMING_ERROR 16
+#define V_ICSPI1_FIFO2X_RX_FRAMING_ERROR(x) ((x) << S_ICSPI1_FIFO2X_RX_FRAMING_ERROR)
+#define F_ICSPI1_FIFO2X_RX_FRAMING_ERROR V_ICSPI1_FIFO2X_RX_FRAMING_ERROR(1U)
+
+#define S_ICSPI0_RX_FRAMING_ERROR 15
+#define V_ICSPI0_RX_FRAMING_ERROR(x) ((x) << S_ICSPI0_RX_FRAMING_ERROR)
+#define F_ICSPI0_RX_FRAMING_ERROR V_ICSPI0_RX_FRAMING_ERROR(1U)
+
+#define S_ICSPI1_RX_FRAMING_ERROR 14
+#define V_ICSPI1_RX_FRAMING_ERROR(x) ((x) << S_ICSPI1_RX_FRAMING_ERROR)
+#define F_ICSPI1_RX_FRAMING_ERROR V_ICSPI1_RX_FRAMING_ERROR(1U)
+
+#define S_ICSPI0_TX_FRAMING_ERROR 13
+#define V_ICSPI0_TX_FRAMING_ERROR(x) ((x) << S_ICSPI0_TX_FRAMING_ERROR)
+#define F_ICSPI0_TX_FRAMING_ERROR V_ICSPI0_TX_FRAMING_ERROR(1U)
+
+#define S_ICSPI1_TX_FRAMING_ERROR 12
+#define V_ICSPI1_TX_FRAMING_ERROR(x) ((x) << S_ICSPI1_TX_FRAMING_ERROR)
+#define F_ICSPI1_TX_FRAMING_ERROR V_ICSPI1_TX_FRAMING_ERROR(1U)
+
+#define S_OESPI0_RX_FRAMING_ERROR 11
+#define V_OESPI0_RX_FRAMING_ERROR(x) ((x) << S_OESPI0_RX_FRAMING_ERROR)
+#define F_OESPI0_RX_FRAMING_ERROR V_OESPI0_RX_FRAMING_ERROR(1U)
+
+#define S_OESPI1_RX_FRAMING_ERROR 10
+#define V_OESPI1_RX_FRAMING_ERROR(x) ((x) << S_OESPI1_RX_FRAMING_ERROR)
+#define F_OESPI1_RX_FRAMING_ERROR V_OESPI1_RX_FRAMING_ERROR(1U)
+
+#define S_OESPI0_TX_FRAMING_ERROR 9
+#define V_OESPI0_TX_FRAMING_ERROR(x) ((x) << S_OESPI0_TX_FRAMING_ERROR)
+#define F_OESPI0_TX_FRAMING_ERROR V_OESPI0_TX_FRAMING_ERROR(1U)
+
+#define S_OESPI1_TX_FRAMING_ERROR 8
+#define V_OESPI1_TX_FRAMING_ERROR(x) ((x) << S_OESPI1_TX_FRAMING_ERROR)
+#define F_OESPI1_TX_FRAMING_ERROR V_OESPI1_TX_FRAMING_ERROR(1U)
+
+#define S_OESPI0_OFIFO2X_TX_FRAMING_ERROR 7
+#define V_OESPI0_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OESPI0_OFIFO2X_TX_FRAMING_ERROR)
+#define F_OESPI0_OFIFO2X_TX_FRAMING_ERROR V_OESPI0_OFIFO2X_TX_FRAMING_ERROR(1U)
+
+#define S_OESPI1_OFIFO2X_TX_FRAMING_ERROR 6
+#define V_OESPI1_OFIFO2X_TX_FRAMING_ERROR(x) ((x) << S_OESPI1_OFIFO2X_TX_FRAMING_ERROR)
+#define F_OESPI1_OFIFO2X_TX_FRAMING_ERROR V_OESPI1_OFIFO2X_TX_FRAMING_ERROR(1U)
+
+#define S_ICSPI_PAR_ERROR 3
+#define M_ICSPI_PAR_ERROR 0x7
+
+#define V_ICSPI_PAR_ERROR(x) ((x) << S_ICSPI_PAR_ERROR)
+
+#define S_OESPI_PAR_ERROR 0
+#define M_OESPI_PAR_ERROR 0x7
+
+#define V_OESPI_PAR_ERROR(x) ((x) << S_OESPI_PAR_ERROR)
+
+#define A_PM1_TX_INT_CAUSE 0x5fc
+
+#define A_MPS_CFG 0x600
+
+#define S_TPRXPORTEN 4
+#define V_TPRXPORTEN(x) ((x) << S_TPRXPORTEN)
+#define F_TPRXPORTEN V_TPRXPORTEN(1U)
+
+#define S_TPTXPORT1EN 3
+#define V_TPTXPORT1EN(x) ((x) << S_TPTXPORT1EN)
+#define F_TPTXPORT1EN V_TPTXPORT1EN(1U)
+
+#define S_TPTXPORT0EN 2
+#define V_TPTXPORT0EN(x) ((x) << S_TPTXPORT0EN)
+#define F_TPTXPORT0EN V_TPTXPORT0EN(1U)
+
+#define S_PORT1ACTIVE 1
+#define V_PORT1ACTIVE(x) ((x) << S_PORT1ACTIVE)
+#define F_PORT1ACTIVE V_PORT1ACTIVE(1U)
+
+#define S_PORT0ACTIVE 0
+#define V_PORT0ACTIVE(x) ((x) << S_PORT0ACTIVE)
+#define F_PORT0ACTIVE V_PORT0ACTIVE(1U)
+
+#define S_ENFORCEPKT 11
+#define V_ENFORCEPKT(x) ((x) << S_ENFORCEPKT)
+#define F_ENFORCEPKT V_ENFORCEPKT(1U)
+
+#define A_MPS_INT_ENABLE 0x61c
+
+#define S_MCAPARERRENB 6
+#define M_MCAPARERRENB 0x7
+
+#define V_MCAPARERRENB(x) ((x) << S_MCAPARERRENB)
+
+#define S_RXTPPARERRENB 4
+#define M_RXTPPARERRENB 0x3
+
+#define V_RXTPPARERRENB(x) ((x) << S_RXTPPARERRENB)
+
+#define S_TX1TPPARERRENB 2
+#define M_TX1TPPARERRENB 0x3
+
+#define V_TX1TPPARERRENB(x) ((x) << S_TX1TPPARERRENB)
+
+#define S_TX0TPPARERRENB 0
+#define M_TX0TPPARERRENB 0x3
+
+#define V_TX0TPPARERRENB(x) ((x) << S_TX0TPPARERRENB)
+
+#define A_MPS_INT_CAUSE 0x620
+
+#define S_MCAPARERR 6
+#define M_MCAPARERR 0x7
+
+#define V_MCAPARERR(x) ((x) << S_MCAPARERR)
+
+#define S_RXTPPARERR 4
+#define M_RXTPPARERR 0x3
+
+#define V_RXTPPARERR(x) ((x) << S_RXTPPARERR)
+
+#define S_TX1TPPARERR 2
+#define M_TX1TPPARERR 0x3
+
+#define V_TX1TPPARERR(x) ((x) << S_TX1TPPARERR)
+
+#define S_TX0TPPARERR 0
+#define M_TX0TPPARERR 0x3
+
+#define V_TX0TPPARERR(x) ((x) << S_TX0TPPARERR)
+
+#define A_CPL_SWITCH_CNTRL 0x640
+
+#define A_CPL_INTR_ENABLE 0x650
+
+#define S_CIM_OVFL_ERROR 4
+#define V_CIM_OVFL_ERROR(x) ((x) << S_CIM_OVFL_ERROR)
+#define F_CIM_OVFL_ERROR V_CIM_OVFL_ERROR(1U)
+
+#define S_TP_FRAMING_ERROR 3
+#define V_TP_FRAMING_ERROR(x) ((x) << S_TP_FRAMING_ERROR)
+#define F_TP_FRAMING_ERROR V_TP_FRAMING_ERROR(1U)
+
+#define S_SGE_FRAMING_ERROR 2
+#define V_SGE_FRAMING_ERROR(x) ((x) << S_SGE_FRAMING_ERROR)
+#define F_SGE_FRAMING_ERROR V_SGE_FRAMING_ERROR(1U)
+
+#define S_CIM_FRAMING_ERROR 1
+#define V_CIM_FRAMING_ERROR(x) ((x) << S_CIM_FRAMING_ERROR)
+#define F_CIM_FRAMING_ERROR V_CIM_FRAMING_ERROR(1U)
+
+#define S_ZERO_SWITCH_ERROR 0
+#define V_ZERO_SWITCH_ERROR(x) ((x) << S_ZERO_SWITCH_ERROR)
+#define F_ZERO_SWITCH_ERROR V_ZERO_SWITCH_ERROR(1U)
+
+#define A_CPL_INTR_CAUSE 0x654
+
+#define A_CPL_MAP_TBL_DATA 0x65c
+
+#define A_SMB_GLOBAL_TIME_CFG 0x660
+
+#define A_I2C_CFG 0x6a0
+
+#define S_I2C_CLKDIV 0
+#define M_I2C_CLKDIV 0xfff
+#define V_I2C_CLKDIV(x) ((x) << S_I2C_CLKDIV)
+
+#define A_MI1_CFG 0x6b0
+
+#define S_CLKDIV 5
+#define M_CLKDIV 0xff
+#define V_CLKDIV(x) ((x) << S_CLKDIV)
+
+#define S_ST 3
+
+#define M_ST 0x3
+
+#define V_ST(x) ((x) << S_ST)
+
+#define G_ST(x) (((x) >> S_ST) & M_ST)
+
+#define S_PREEN 2
+#define V_PREEN(x) ((x) << S_PREEN)
+#define F_PREEN V_PREEN(1U)
+
+#define S_MDIINV 1
+#define V_MDIINV(x) ((x) << S_MDIINV)
+#define F_MDIINV V_MDIINV(1U)
+
+#define S_MDIEN 0
+#define V_MDIEN(x) ((x) << S_MDIEN)
+#define F_MDIEN V_MDIEN(1U)
+
+#define A_MI1_ADDR 0x6b4
+
+#define S_PHYADDR 5
+#define M_PHYADDR 0x1f
+#define V_PHYADDR(x) ((x) << S_PHYADDR)
+
+#define S_REGADDR 0
+#define M_REGADDR 0x1f
+#define V_REGADDR(x) ((x) << S_REGADDR)
+
+#define A_MI1_DATA 0x6b8
+
+#define A_MI1_OP 0x6bc
+
+#define S_MDI_OP 0
+#define M_MDI_OP 0x3
+#define V_MDI_OP(x) ((x) << S_MDI_OP)
+
+#define A_SF_DATA 0x6d8
+
+#define A_SF_OP 0x6dc
+
+#define S_BYTECNT 1
+#define M_BYTECNT 0x3
+#define V_BYTECNT(x) ((x) << S_BYTECNT)
+
+#define A_PL_INT_ENABLE0 0x6e0
+
+#define S_T3DBG 23
+#define V_T3DBG(x) ((x) << S_T3DBG)
+#define F_T3DBG V_T3DBG(1U)
+
+#define S_XGMAC0_1 20
+#define V_XGMAC0_1(x) ((x) << S_XGMAC0_1)
+#define F_XGMAC0_1 V_XGMAC0_1(1U)
+
+#define S_XGMAC0_0 19
+#define V_XGMAC0_0(x) ((x) << S_XGMAC0_0)
+#define F_XGMAC0_0 V_XGMAC0_0(1U)
+
+#define S_MC5A 18
+#define V_MC5A(x) ((x) << S_MC5A)
+#define F_MC5A V_MC5A(1U)
+
+#define S_CPL_SWITCH 12
+#define V_CPL_SWITCH(x) ((x) << S_CPL_SWITCH)
+#define F_CPL_SWITCH V_CPL_SWITCH(1U)
+
+#define S_MPS0 11
+#define V_MPS0(x) ((x) << S_MPS0)
+#define F_MPS0 V_MPS0(1U)
+
+#define S_PM1_TX 10
+#define V_PM1_TX(x) ((x) << S_PM1_TX)
+#define F_PM1_TX V_PM1_TX(1U)
+
+#define S_PM1_RX 9
+#define V_PM1_RX(x) ((x) << S_PM1_RX)
+#define F_PM1_RX V_PM1_RX(1U)
+
+#define S_ULP2_TX 8
+#define V_ULP2_TX(x) ((x) << S_ULP2_TX)
+#define F_ULP2_TX V_ULP2_TX(1U)
+
+#define S_ULP2_RX 7
+#define V_ULP2_RX(x) ((x) << S_ULP2_RX)
+#define F_ULP2_RX V_ULP2_RX(1U)
+
+#define S_TP1 6
+#define V_TP1(x) ((x) << S_TP1)
+#define F_TP1 V_TP1(1U)
+
+#define S_CIM 5
+#define V_CIM(x) ((x) << S_CIM)
+#define F_CIM V_CIM(1U)
+
+#define S_MC7_CM 4
+#define V_MC7_CM(x) ((x) << S_MC7_CM)
+#define F_MC7_CM V_MC7_CM(1U)
+
+#define S_MC7_PMTX 3
+#define V_MC7_PMTX(x) ((x) << S_MC7_PMTX)
+#define F_MC7_PMTX V_MC7_PMTX(1U)
+
+#define S_MC7_PMRX 2
+#define V_MC7_PMRX(x) ((x) << S_MC7_PMRX)
+#define F_MC7_PMRX V_MC7_PMRX(1U)
+
+#define S_PCIM0 1
+#define V_PCIM0(x) ((x) << S_PCIM0)
+#define F_PCIM0 V_PCIM0(1U)
+
+#define S_SGE3 0
+#define V_SGE3(x) ((x) << S_SGE3)
+#define F_SGE3 V_SGE3(1U)
+
+#define A_PL_INT_CAUSE0 0x6e4
+
+#define A_PL_RST 0x6f0
+
+#define S_CRSTWRM 1
+#define V_CRSTWRM(x) ((x) << S_CRSTWRM)
+#define F_CRSTWRM V_CRSTWRM(1U)
+
+#define A_PL_REV 0x6f4
+
+#define A_PL_CLI 0x6f8
+
+#define A_MC5_DB_CONFIG 0x704
+
+#define S_TMTYPEHI 30
+#define V_TMTYPEHI(x) ((x) << S_TMTYPEHI)
+#define F_TMTYPEHI V_TMTYPEHI(1U)
+
+#define S_TMPARTSIZE 28
+#define M_TMPARTSIZE 0x3
+#define V_TMPARTSIZE(x) ((x) << S_TMPARTSIZE)
+#define G_TMPARTSIZE(x) (((x) >> S_TMPARTSIZE) & M_TMPARTSIZE)
+
+#define S_TMTYPE 26
+#define M_TMTYPE 0x3
+#define V_TMTYPE(x) ((x) << S_TMTYPE)
+#define G_TMTYPE(x) (((x) >> S_TMTYPE) & M_TMTYPE)
+
+#define S_COMPEN 17
+#define V_COMPEN(x) ((x) << S_COMPEN)
+#define F_COMPEN V_COMPEN(1U)
+
+#define S_PRTYEN 6
+#define V_PRTYEN(x) ((x) << S_PRTYEN)
+#define F_PRTYEN V_PRTYEN(1U)
+
+#define S_MBUSEN 5
+#define V_MBUSEN(x) ((x) << S_MBUSEN)
+#define F_MBUSEN V_MBUSEN(1U)
+
+#define S_DBGIEN 4
+#define V_DBGIEN(x) ((x) << S_DBGIEN)
+#define F_DBGIEN V_DBGIEN(1U)
+
+#define S_TMRDY 2
+#define V_TMRDY(x) ((x) << S_TMRDY)
+#define F_TMRDY V_TMRDY(1U)
+
+#define S_TMRST 1
+#define V_TMRST(x) ((x) << S_TMRST)
+#define F_TMRST V_TMRST(1U)
+
+#define S_TMMODE 0
+#define V_TMMODE(x) ((x) << S_TMMODE)
+#define F_TMMODE V_TMMODE(1U)
+
+#define F_TMMODE V_TMMODE(1U)
+
+#define A_MC5_DB_ROUTING_TABLE_INDEX 0x70c
+
+#define A_MC5_DB_FILTER_TABLE 0x710
+
+#define A_MC5_DB_SERVER_INDEX 0x714
+
+#define A_MC5_DB_RSP_LATENCY 0x720
+
+#define S_RDLAT 16
+#define M_RDLAT 0x1f
+#define V_RDLAT(x) ((x) << S_RDLAT)
+
+#define S_LRNLAT 8
+#define M_LRNLAT 0x1f
+#define V_LRNLAT(x) ((x) << S_LRNLAT)
+
+#define S_SRCHLAT 0
+#define M_SRCHLAT 0x1f
+#define V_SRCHLAT(x) ((x) << S_SRCHLAT)
+
+#define A_MC5_DB_PART_ID_INDEX 0x72c
+
+#define A_MC5_DB_INT_ENABLE 0x740
+
+#define S_DELACTEMPTY 18
+#define V_DELACTEMPTY(x) ((x) << S_DELACTEMPTY)
+#define F_DELACTEMPTY V_DELACTEMPTY(1U)
+
+#define S_DISPQPARERR 17
+#define V_DISPQPARERR(x) ((x) << S_DISPQPARERR)
+#define F_DISPQPARERR V_DISPQPARERR(1U)
+
+#define S_REQQPARERR 16
+#define V_REQQPARERR(x) ((x) << S_REQQPARERR)
+#define F_REQQPARERR V_REQQPARERR(1U)
+
+#define S_UNKNOWNCMD 15
+#define V_UNKNOWNCMD(x) ((x) << S_UNKNOWNCMD)
+#define F_UNKNOWNCMD V_UNKNOWNCMD(1U)
+
+#define S_NFASRCHFAIL 8
+#define V_NFASRCHFAIL(x) ((x) << S_NFASRCHFAIL)
+#define F_NFASRCHFAIL V_NFASRCHFAIL(1U)
+
+#define S_ACTRGNFULL 7
+#define V_ACTRGNFULL(x) ((x) << S_ACTRGNFULL)
+#define F_ACTRGNFULL V_ACTRGNFULL(1U)
+
+#define S_PARITYERR 6
+#define V_PARITYERR(x) ((x) << S_PARITYERR)
+#define F_PARITYERR V_PARITYERR(1U)
+
+#define A_MC5_DB_INT_CAUSE 0x744
+
+#define A_MC5_DB_DBGI_CONFIG 0x774
+
+#define A_MC5_DB_DBGI_REQ_CMD 0x778
+
+#define A_MC5_DB_DBGI_REQ_ADDR0 0x77c
+
+#define A_MC5_DB_DBGI_REQ_ADDR1 0x780
+
+#define A_MC5_DB_DBGI_REQ_ADDR2 0x784
+
+#define A_MC5_DB_DBGI_REQ_DATA0 0x788
+
+#define A_MC5_DB_DBGI_REQ_DATA1 0x78c
+
+#define A_MC5_DB_DBGI_REQ_DATA2 0x790
+
+#define A_MC5_DB_DBGI_RSP_STATUS 0x7b0
+
+#define S_DBGIRSPVALID 0
+#define V_DBGIRSPVALID(x) ((x) << S_DBGIRSPVALID)
+#define F_DBGIRSPVALID V_DBGIRSPVALID(1U)
+
+#define A_MC5_DB_DBGI_RSP_DATA0 0x7b4
+
+#define A_MC5_DB_DBGI_RSP_DATA1 0x7b8
+
+#define A_MC5_DB_DBGI_RSP_DATA2 0x7bc
+
+#define A_MC5_DB_POPEN_DATA_WR_CMD 0x7cc
+
+#define A_MC5_DB_POPEN_MASK_WR_CMD 0x7d0
+
+#define A_MC5_DB_AOPEN_SRCH_CMD 0x7d4
+
+#define A_MC5_DB_AOPEN_LRN_CMD 0x7d8
+
+#define A_MC5_DB_SYN_SRCH_CMD 0x7dc
+
+#define A_MC5_DB_SYN_LRN_CMD 0x7e0
+
+#define A_MC5_DB_ACK_SRCH_CMD 0x7e4
+
+#define A_MC5_DB_ACK_LRN_CMD 0x7e8
+
+#define A_MC5_DB_ILOOKUP_CMD 0x7ec
+
+#define A_MC5_DB_ELOOKUP_CMD 0x7f0
+
+#define A_MC5_DB_DATA_WRITE_CMD 0x7f4
+
+#define A_MC5_DB_DATA_READ_CMD 0x7f8
+
+#define XGMAC0_0_BASE_ADDR 0x800
+
+#define A_XGM_TX_CTRL 0x800
+
+#define S_TXEN 0
+#define V_TXEN(x) ((x) << S_TXEN)
+#define F_TXEN V_TXEN(1U)
+
+#define A_XGM_TX_CFG 0x804
+
+#define S_TXPAUSEEN 0
+#define V_TXPAUSEEN(x) ((x) << S_TXPAUSEEN)
+#define F_TXPAUSEEN V_TXPAUSEEN(1U)
+
+#define A_XGM_RX_CTRL 0x80c
+
+#define S_RXEN 0
+#define V_RXEN(x) ((x) << S_RXEN)
+#define F_RXEN V_RXEN(1U)
+
+#define A_XGM_RX_CFG 0x810
+
+#define S_DISPAUSEFRAMES 9
+#define V_DISPAUSEFRAMES(x) ((x) << S_DISPAUSEFRAMES)
+#define F_DISPAUSEFRAMES V_DISPAUSEFRAMES(1U)
+
+#define S_EN1536BFRAMES 8
+#define V_EN1536BFRAMES(x) ((x) << S_EN1536BFRAMES)
+#define F_EN1536BFRAMES V_EN1536BFRAMES(1U)
+
+#define S_ENJUMBO 7
+#define V_ENJUMBO(x) ((x) << S_ENJUMBO)
+#define F_ENJUMBO V_ENJUMBO(1U)
+
+#define S_RMFCS 6
+#define V_RMFCS(x) ((x) << S_RMFCS)
+#define F_RMFCS V_RMFCS(1U)
+
+#define S_ENHASHMCAST 2
+#define V_ENHASHMCAST(x) ((x) << S_ENHASHMCAST)
+#define F_ENHASHMCAST V_ENHASHMCAST(1U)
+
+#define S_COPYALLFRAMES 0
+#define V_COPYALLFRAMES(x) ((x) << S_COPYALLFRAMES)
+#define F_COPYALLFRAMES V_COPYALLFRAMES(1U)
+
+#define A_XGM_RX_HASH_LOW 0x814
+
+#define A_XGM_RX_HASH_HIGH 0x818
+
+#define A_XGM_RX_EXACT_MATCH_LOW_1 0x81c
+
+#define A_XGM_RX_EXACT_MATCH_HIGH_1 0x820
+
+#define A_XGM_RX_EXACT_MATCH_LOW_2 0x824
+
+#define A_XGM_RX_EXACT_MATCH_LOW_3 0x82c
+
+#define A_XGM_RX_EXACT_MATCH_LOW_4 0x834
+
+#define A_XGM_RX_EXACT_MATCH_LOW_5 0x83c
+
+#define A_XGM_RX_EXACT_MATCH_LOW_6 0x844
+
+#define A_XGM_RX_EXACT_MATCH_LOW_7 0x84c
+
+#define A_XGM_RX_EXACT_MATCH_LOW_8 0x854
+
+#define A_XGM_STAT_CTRL 0x880
+
+#define S_CLRSTATS 2
+#define V_CLRSTATS(x) ((x) << S_CLRSTATS)
+#define F_CLRSTATS V_CLRSTATS(1U)
+
+#define A_XGM_RXFIFO_CFG 0x884
+
+#define S_RXFIFOPAUSEHWM 17
+#define M_RXFIFOPAUSEHWM 0xfff
+
+#define V_RXFIFOPAUSEHWM(x) ((x) << S_RXFIFOPAUSEHWM)
+
+#define G_RXFIFOPAUSEHWM(x) (((x) >> S_RXFIFOPAUSEHWM) & M_RXFIFOPAUSEHWM)
+
+#define S_RXFIFOPAUSELWM 5
+#define M_RXFIFOPAUSELWM 0xfff
+
+#define V_RXFIFOPAUSELWM(x) ((x) << S_RXFIFOPAUSELWM)
+
+#define G_RXFIFOPAUSELWM(x) (((x) >> S_RXFIFOPAUSELWM) & M_RXFIFOPAUSELWM)
+
+#define S_RXSTRFRWRD 1
+#define V_RXSTRFRWRD(x) ((x) << S_RXSTRFRWRD)
+#define F_RXSTRFRWRD V_RXSTRFRWRD(1U)
+
+#define S_DISERRFRAMES 0
+#define V_DISERRFRAMES(x) ((x) << S_DISERRFRAMES)
+#define F_DISERRFRAMES V_DISERRFRAMES(1U)
+
+#define A_XGM_TXFIFO_CFG 0x888
+
+#define S_TXFIFOTHRESH 4
+#define M_TXFIFOTHRESH 0x1ff
+
+#define V_TXFIFOTHRESH(x) ((x) << S_TXFIFOTHRESH)
+
+#define A_XGM_SERDES_CTRL 0x890
+#define A_XGM_SERDES_CTRL0 0x8e0
+
+#define S_SERDESRESET_ 24
+#define V_SERDESRESET_(x) ((x) << S_SERDESRESET_)
+#define F_SERDESRESET_ V_SERDESRESET_(1U)
+
+#define S_RXENABLE 4
+#define V_RXENABLE(x) ((x) << S_RXENABLE)
+#define F_RXENABLE V_RXENABLE(1U)
+
+#define S_TXENABLE 3
+#define V_TXENABLE(x) ((x) << S_TXENABLE)
+#define F_TXENABLE V_TXENABLE(1U)
+
+#define A_XGM_PAUSE_TIMER 0x890
+
+#define A_XGM_RGMII_IMP 0x89c
+
+#define S_XGM_IMPSETUPDATE 6
+#define V_XGM_IMPSETUPDATE(x) ((x) << S_XGM_IMPSETUPDATE)
+#define F_XGM_IMPSETUPDATE V_XGM_IMPSETUPDATE(1U)
+
+#define S_RGMIIIMPPD 3
+#define M_RGMIIIMPPD 0x7
+#define V_RGMIIIMPPD(x) ((x) << S_RGMIIIMPPD)
+
+#define S_RGMIIIMPPU 0
+#define M_RGMIIIMPPU 0x7
+#define V_RGMIIIMPPU(x) ((x) << S_RGMIIIMPPU)
+
+#define S_CALRESET 8
+#define V_CALRESET(x) ((x) << S_CALRESET)
+#define F_CALRESET V_CALRESET(1U)
+
+#define S_CALUPDATE 7
+#define V_CALUPDATE(x) ((x) << S_CALUPDATE)
+#define F_CALUPDATE V_CALUPDATE(1U)
+
+#define A_XGM_XAUI_IMP 0x8a0
+
+#define S_CALBUSY 31
+#define V_CALBUSY(x) ((x) << S_CALBUSY)
+#define F_CALBUSY V_CALBUSY(1U)
+
+#define S_XGM_CALFAULT 29
+#define V_XGM_CALFAULT(x) ((x) << S_XGM_CALFAULT)
+#define F_XGM_CALFAULT V_XGM_CALFAULT(1U)
+
+#define S_CALIMP 24
+#define M_CALIMP 0x1f
+#define V_CALIMP(x) ((x) << S_CALIMP)
+#define G_CALIMP(x) (((x) >> S_CALIMP) & M_CALIMP)
+
+#define S_XAUIIMP 0
+#define M_XAUIIMP 0x7
+#define V_XAUIIMP(x) ((x) << S_XAUIIMP)
+
+#define A_XGM_RX_MAX_PKT_SIZE 0x8a8
+#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4
+
+#define A_XGM_RESET_CTRL 0x8ac
+
+#define S_XG2G_RESET_ 3
+#define V_XG2G_RESET_(x) ((x) << S_XG2G_RESET_)
+#define F_XG2G_RESET_ V_XG2G_RESET_(1U)
+
+#define S_RGMII_RESET_ 2
+#define V_RGMII_RESET_(x) ((x) << S_RGMII_RESET_)
+#define F_RGMII_RESET_ V_RGMII_RESET_(1U)
+
+#define S_PCS_RESET_ 1
+#define V_PCS_RESET_(x) ((x) << S_PCS_RESET_)
+#define F_PCS_RESET_ V_PCS_RESET_(1U)
+
+#define S_MAC_RESET_ 0
+#define V_MAC_RESET_(x) ((x) << S_MAC_RESET_)
+#define F_MAC_RESET_ V_MAC_RESET_(1U)
+
+#define A_XGM_PORT_CFG 0x8b8
+
+#define S_CLKDIVRESET_ 3
+#define V_CLKDIVRESET_(x) ((x) << S_CLKDIVRESET_)
+#define F_CLKDIVRESET_ V_CLKDIVRESET_(1U)
+
+#define S_PORTSPEED 1
+#define M_PORTSPEED 0x3
+
+#define V_PORTSPEED(x) ((x) << S_PORTSPEED)
+
+#define S_ENRGMII 0
+#define V_ENRGMII(x) ((x) << S_ENRGMII)
+#define F_ENRGMII V_ENRGMII(1U)
+
+#define A_XGM_INT_ENABLE 0x8d4
+
+#define S_TXFIFO_PRTY_ERR 17
+#define M_TXFIFO_PRTY_ERR 0x7
+
+#define V_TXFIFO_PRTY_ERR(x) ((x) << S_TXFIFO_PRTY_ERR)
+
+#define S_RXFIFO_PRTY_ERR 14
+#define M_RXFIFO_PRTY_ERR 0x7
+
+#define V_RXFIFO_PRTY_ERR(x) ((x) << S_RXFIFO_PRTY_ERR)
+
+#define S_TXFIFO_UNDERRUN 13
+#define V_TXFIFO_UNDERRUN(x) ((x) << S_TXFIFO_UNDERRUN)
+#define F_TXFIFO_UNDERRUN V_TXFIFO_UNDERRUN(1U)
+
+#define S_RXFIFO_OVERFLOW 12
+#define V_RXFIFO_OVERFLOW(x) ((x) << S_RXFIFO_OVERFLOW)
+#define F_RXFIFO_OVERFLOW V_RXFIFO_OVERFLOW(1U)
+
+#define S_SERDES_LOS 4
+#define M_SERDES_LOS 0xf
+
+#define V_SERDES_LOS(x) ((x) << S_SERDES_LOS)
+
+#define S_XAUIPCSCTCERR 3
+#define V_XAUIPCSCTCERR(x) ((x) << S_XAUIPCSCTCERR)
+#define F_XAUIPCSCTCERR V_XAUIPCSCTCERR(1U)
+
+#define S_XAUIPCSALIGNCHANGE 2
+#define V_XAUIPCSALIGNCHANGE(x) ((x) << S_XAUIPCSALIGNCHANGE)
+#define F_XAUIPCSALIGNCHANGE V_XAUIPCSALIGNCHANGE(1U)
+
+#define A_XGM_INT_CAUSE 0x8d8
+
+#define A_XGM_XAUI_ACT_CTRL 0x8dc
+
+#define S_TXACTENABLE 1
+#define V_TXACTENABLE(x) ((x) << S_TXACTENABLE)
+#define F_TXACTENABLE V_TXACTENABLE(1U)
+
+#define A_XGM_SERDES_CTRL0 0x8e0
+
+#define S_RESET3 23
+#define V_RESET3(x) ((x) << S_RESET3)
+#define F_RESET3 V_RESET3(1U)
+
+#define S_RESET2 22
+#define V_RESET2(x) ((x) << S_RESET2)
+#define F_RESET2 V_RESET2(1U)
+
+#define S_RESET1 21
+#define V_RESET1(x) ((x) << S_RESET1)
+#define F_RESET1 V_RESET1(1U)
+
+#define S_RESET0 20
+#define V_RESET0(x) ((x) << S_RESET0)
+#define F_RESET0 V_RESET0(1U)
+
+#define S_PWRDN3 19
+#define V_PWRDN3(x) ((x) << S_PWRDN3)
+#define F_PWRDN3 V_PWRDN3(1U)
+
+#define S_PWRDN2 18
+#define V_PWRDN2(x) ((x) << S_PWRDN2)
+#define F_PWRDN2 V_PWRDN2(1U)
+
+#define S_PWRDN1 17
+#define V_PWRDN1(x) ((x) << S_PWRDN1)
+#define F_PWRDN1 V_PWRDN1(1U)
+
+#define S_PWRDN0 16
+#define V_PWRDN0(x) ((x) << S_PWRDN0)
+#define F_PWRDN0 V_PWRDN0(1U)
+
+#define S_RESETPLL23 15
+#define V_RESETPLL23(x) ((x) << S_RESETPLL23)
+#define F_RESETPLL23 V_RESETPLL23(1U)
+
+#define S_RESETPLL01 14
+#define V_RESETPLL01(x) ((x) << S_RESETPLL01)
+#define F_RESETPLL01 V_RESETPLL01(1U)
+
+#define A_XGM_SERDES_STAT0 0x8f0
+
+#define S_LOWSIG0 0
+#define V_LOWSIG0(x) ((x) << S_LOWSIG0)
+#define F_LOWSIG0 V_LOWSIG0(1U)
+
+#define A_XGM_SERDES_STAT3 0x8fc
+
+#define A_XGM_STAT_TX_BYTE_LOW 0x900
+
+#define A_XGM_STAT_TX_BYTE_HIGH 0x904
+
+#define A_XGM_STAT_TX_FRAME_LOW 0x908
+
+#define A_XGM_STAT_TX_FRAME_HIGH 0x90c
+
+#define A_XGM_STAT_TX_BCAST 0x910
+
+#define A_XGM_STAT_TX_MCAST 0x914
+
+#define A_XGM_STAT_TX_PAUSE 0x918
+
+#define A_XGM_STAT_TX_64B_FRAMES 0x91c
+
+#define A_XGM_STAT_TX_65_127B_FRAMES 0x920
+
+#define A_XGM_STAT_TX_128_255B_FRAMES 0x924
+
+#define A_XGM_STAT_TX_256_511B_FRAMES 0x928
+
+#define A_XGM_STAT_TX_512_1023B_FRAMES 0x92c
+
+#define A_XGM_STAT_TX_1024_1518B_FRAMES 0x930
+
+#define A_XGM_STAT_TX_1519_MAXB_FRAMES 0x934
+
+#define A_XGM_STAT_TX_ERR_FRAMES 0x938
+
+#define A_XGM_STAT_RX_BYTES_LOW 0x93c
+
+#define A_XGM_STAT_RX_BYTES_HIGH 0x940
+
+#define A_XGM_STAT_RX_FRAMES_LOW 0x944
+
+#define A_XGM_STAT_RX_FRAMES_HIGH 0x948
+
+#define A_XGM_STAT_RX_BCAST_FRAMES 0x94c
+
+#define A_XGM_STAT_RX_MCAST_FRAMES 0x950
+
+#define A_XGM_STAT_RX_PAUSE_FRAMES 0x954
+
+#define A_XGM_STAT_RX_64B_FRAMES 0x958
+
+#define A_XGM_STAT_RX_65_127B_FRAMES 0x95c
+
+#define A_XGM_STAT_RX_128_255B_FRAMES 0x960
+
+#define A_XGM_STAT_RX_256_511B_FRAMES 0x964
+
+#define A_XGM_STAT_RX_512_1023B_FRAMES 0x968
+
+#define A_XGM_STAT_RX_1024_1518B_FRAMES 0x96c
+
+#define A_XGM_STAT_RX_1519_MAXB_FRAMES 0x970
+
+#define A_XGM_STAT_RX_SHORT_FRAMES 0x974
+
+#define A_XGM_STAT_RX_OVERSIZE_FRAMES 0x978
+
+#define A_XGM_STAT_RX_JABBER_FRAMES 0x97c
+
+#define A_XGM_STAT_RX_CRC_ERR_FRAMES 0x980
+
+#define A_XGM_STAT_RX_LENGTH_ERR_FRAMES 0x984
+
+#define A_XGM_STAT_RX_SYM_CODE_ERR_FRAMES 0x988
+
+#define A_XGM_SERDES_STATUS0 0x98c
+
+#define A_XGM_SERDES_STATUS1 0x990
+
+#define S_CMULOCK 31
+#define V_CMULOCK(x) ((x) << S_CMULOCK)
+#define F_CMULOCK V_CMULOCK(1U)
+
+#define A_XGM_RX_MAX_PKT_SIZE_ERR_CNT 0x9a4
+
+#define A_XGM_RX_SPI4_SOP_EOP_CNT 0x9ac
+
+#define XGMAC0_1_BASE_ADDR 0xa00
--- /dev/null
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/if_vlan.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/dma-mapping.h>
+#include "common.h"
+#include "regs.h"
+#include "sge_defs.h"
+#include "t3_cpl.h"
+#include "firmware_exports.h"
+
+#define USE_GTS 0
+
+#define SGE_RX_SM_BUF_SIZE 1536
+#define SGE_RX_COPY_THRES 256
+
+# define SGE_RX_DROP_THRES 16
+
+/*
+ * Period of the Tx buffer reclaim timer. This timer does not need to run
+ * frequently as Tx buffers are usually reclaimed by new Tx packets.
+ */
+#define TX_RECLAIM_PERIOD (HZ / 4)
+
+/* WR size in bytes */
+#define WR_LEN (WR_FLITS * 8)
+
+/*
+ * Types of Tx queues in each queue set. Order here matters, do not change.
+ */
+enum { TXQ_ETH, TXQ_OFLD, TXQ_CTRL };
+
+/* Values for sge_txq.flags */
+enum {
+ TXQ_RUNNING = 1 << 0, /* fetch engine is running */
+ TXQ_LAST_PKT_DB = 1 << 1, /* last packet rang the doorbell */
+};
+
+struct tx_desc {
+ u64 flit[TX_DESC_FLITS];
+};
+
+struct rx_desc {
+ __be32 addr_lo;
+ __be32 len_gen;
+ __be32 gen2;
+ __be32 addr_hi;
+};
+
+struct tx_sw_desc { /* SW state per Tx descriptor */
+ struct sk_buff *skb;
+};
+
+struct rx_sw_desc { /* SW state per Rx descriptor */
+ struct sk_buff *skb;
+ DECLARE_PCI_UNMAP_ADDR(dma_addr);
+};
+
+struct rsp_desc { /* response queue descriptor */
+ struct rss_header rss_hdr;
+ __be32 flags;
+ __be32 len_cq;
+ u8 imm_data[47];
+ u8 intr_gen;
+};
+
+struct unmap_info { /* packet unmapping info, overlays skb->cb */
+ int sflit; /* start flit of first SGL entry in Tx descriptor */
+ u16 fragidx; /* first page fragment in current Tx descriptor */
+ u16 addr_idx; /* buffer index of first SGL entry in descriptor */
+ u32 len; /* mapped length of skb main body */
+};
+
+/*
+ * Maps a number of flits to the number of Tx descriptors that can hold them.
+ * The formula is
+ *
+ * desc = 1 + (flits - 2) / (WR_FLITS - 1).
+ *
+ * HW allows up to 4 descriptors to be combined into a WR.
+ */
+static u8 flit_desc_map[] = {
+ 0,
+#if SGE_NUM_GENBITS == 1
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4
+#elif SGE_NUM_GENBITS == 2
+ 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
+ 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
+ 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3,
+ 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
+#else
+# error "SGE_NUM_GENBITS must be 1 or 2"
+#endif
+};
+
+static inline struct sge_qset *fl_to_qset(const struct sge_fl *q, int qidx)
+{
+ return container_of(q, struct sge_qset, fl[qidx]);
+}
+
+static inline struct sge_qset *rspq_to_qset(const struct sge_rspq *q)
+{
+ return container_of(q, struct sge_qset, rspq);
+}
+
+static inline struct sge_qset *txq_to_qset(const struct sge_txq *q, int qidx)
+{
+ return container_of(q, struct sge_qset, txq[qidx]);
+}
+
+/**
+ * refill_rspq - replenish an SGE response queue
+ * @adapter: the adapter
+ * @q: the response queue to replenish
+ * @credits: how many new responses to make available
+ *
+ * Replenishes a response queue by making the supplied number of responses
+ * available to HW.
+ */
+static inline void refill_rspq(struct adapter *adapter,
+ const struct sge_rspq *q, unsigned int credits)
+{
+ t3_write_reg(adapter, A_SG_RSPQ_CREDIT_RETURN,
+ V_RSPQ(q->cntxt_id) | V_CREDITS(credits));
+}
+
+/**
+ * need_skb_unmap - does the platform need unmapping of sk_buffs?
+ *
+ * Returns true if the platfrom needs sk_buff unmapping. The compiler
+ * optimizes away unecessary code if this returns true.
+ */
+static inline int need_skb_unmap(void)
+{
+ /*
+ * This structure is used to tell if the platfrom needs buffer
+ * unmapping by checking if DECLARE_PCI_UNMAP_ADDR defines anything.
+ */
+ struct dummy {
+ DECLARE_PCI_UNMAP_ADDR(addr);
+ };
+
+ return sizeof(struct dummy) != 0;
+}
+
+/**
+ * unmap_skb - unmap a packet main body and its page fragments
+ * @skb: the packet
+ * @q: the Tx queue containing Tx descriptors for the packet
+ * @cidx: index of Tx descriptor
+ * @pdev: the PCI device
+ *
+ * Unmap the main body of an sk_buff and its page fragments, if any.
+ * Because of the fairly complicated structure of our SGLs and the desire
+ * to conserve space for metadata, we keep the information necessary to
+ * unmap an sk_buff partly in the sk_buff itself (in its cb), and partly
+ * in the Tx descriptors (the physical addresses of the various data
+ * buffers). The send functions initialize the state in skb->cb so we
+ * can unmap the buffers held in the first Tx descriptor here, and we
+ * have enough information at this point to update the state for the next
+ * Tx descriptor.
+ */
+static inline void unmap_skb(struct sk_buff *skb, struct sge_txq *q,
+ unsigned int cidx, struct pci_dev *pdev)
+{
+ const struct sg_ent *sgp;
+ struct unmap_info *ui = (struct unmap_info *)skb->cb;
+ int nfrags, frag_idx, curflit, j = ui->addr_idx;
+
+ sgp = (struct sg_ent *)&q->desc[cidx].flit[ui->sflit];
+
+ if (ui->len) {
+ pci_unmap_single(pdev, be64_to_cpu(sgp->addr[0]), ui->len,
+ PCI_DMA_TODEVICE);
+ ui->len = 0; /* so we know for next descriptor for this skb */
+ j = 1;
+ }
+
+ frag_idx = ui->fragidx;
+ curflit = ui->sflit + 1 + j;
+ nfrags = skb_shinfo(skb)->nr_frags;
+
+ while (frag_idx < nfrags && curflit < WR_FLITS) {
+ pci_unmap_page(pdev, be64_to_cpu(sgp->addr[j]),
+ skb_shinfo(skb)->frags[frag_idx].size,
+ PCI_DMA_TODEVICE);
+ j ^= 1;
+ if (j == 0) {
+ sgp++;
+ curflit++;
+ }
+ curflit++;
+ frag_idx++;
+ }
+
+ if (frag_idx < nfrags) { /* SGL continues into next Tx descriptor */
+ ui->fragidx = frag_idx;
+ ui->addr_idx = j;
+ ui->sflit = curflit - WR_FLITS - j; /* sflit can be -1 */
+ }
+}
+
+/**
+ * free_tx_desc - reclaims Tx descriptors and their buffers
+ * @adapter: the adapter
+ * @q: the Tx queue to reclaim descriptors from
+ * @n: the number of descriptors to reclaim
+ *
+ * Reclaims Tx descriptors from an SGE Tx queue and frees the associated
+ * Tx buffers. Called with the Tx queue lock held.
+ */
+static void free_tx_desc(struct adapter *adapter, struct sge_txq *q,
+ unsigned int n)
+{
+ struct tx_sw_desc *d;
+ struct pci_dev *pdev = adapter->pdev;
+ unsigned int cidx = q->cidx;
+
+ d = &q->sdesc[cidx];
+ while (n--) {
+ if (d->skb) { /* an SGL is present */
+ if (need_skb_unmap())
+ unmap_skb(d->skb, q, cidx, pdev);
+ if (d->skb->priority == cidx)
+ kfree_skb(d->skb);
+ }
+ ++d;
+ if (++cidx == q->size) {
+ cidx = 0;
+ d = q->sdesc;
+ }
+ }
+ q->cidx = cidx;
+}
+
+/**
+ * reclaim_completed_tx - reclaims completed Tx descriptors
+ * @adapter: the adapter
+ * @q: the Tx queue to reclaim completed descriptors from
+ *
+ * Reclaims Tx descriptors that the SGE has indicated it has processed,
+ * and frees the associated buffers if possible. Called with the Tx
+ * queue's lock held.
+ */
+static inline void reclaim_completed_tx(struct adapter *adapter,
+ struct sge_txq *q)
+{
+ unsigned int reclaim = q->processed - q->cleaned;
+
+ if (reclaim) {
+ free_tx_desc(adapter, q, reclaim);
+ q->cleaned += reclaim;
+ q->in_use -= reclaim;
+ }
+}
+
+/**
+ * should_restart_tx - are there enough resources to restart a Tx queue?
+ * @q: the Tx queue
+ *
+ * Checks if there are enough descriptors to restart a suspended Tx queue.
+ */
+static inline int should_restart_tx(const struct sge_txq *q)
+{
+ unsigned int r = q->processed - q->cleaned;
+
+ return q->in_use - r < (q->size >> 1);
+}
+
+/**
+ * free_rx_bufs - free the Rx buffers on an SGE free list
+ * @pdev: the PCI device associated with the adapter
+ * @rxq: the SGE free list to clean up
+ *
+ * Release the buffers on an SGE free-buffer Rx queue. HW fetching from
+ * this queue should be stopped before calling this function.
+ */
+static void free_rx_bufs(struct pci_dev *pdev, struct sge_fl *q)
+{
+ unsigned int cidx = q->cidx;
+
+ while (q->credits--) {
+ struct rx_sw_desc *d = &q->sdesc[cidx];
+
+ pci_unmap_single(pdev, pci_unmap_addr(d, dma_addr),
+ q->buf_size, PCI_DMA_FROMDEVICE);
+ kfree_skb(d->skb);
+ d->skb = NULL;
+ if (++cidx == q->size)
+ cidx = 0;
+ }
+}
+
+/**
+ * add_one_rx_buf - add a packet buffer to a free-buffer list
+ * @skb: the buffer to add
+ * @len: the buffer length
+ * @d: the HW Rx descriptor to write
+ * @sd: the SW Rx descriptor to write
+ * @gen: the generation bit value
+ * @pdev: the PCI device associated with the adapter
+ *
+ * Add a buffer of the given length to the supplied HW and SW Rx
+ * descriptors.
+ */
+static inline void add_one_rx_buf(struct sk_buff *skb, unsigned int len,
+ struct rx_desc *d, struct rx_sw_desc *sd,
+ unsigned int gen, struct pci_dev *pdev)
+{
+ dma_addr_t mapping;
+
+ sd->skb = skb;
+ mapping = pci_map_single(pdev, skb->data, len, PCI_DMA_FROMDEVICE);
+ pci_unmap_addr_set(sd, dma_addr, mapping);
+
+ d->addr_lo = cpu_to_be32(mapping);
+ d->addr_hi = cpu_to_be32((u64) mapping >> 32);
+ wmb();
+ d->len_gen = cpu_to_be32(V_FLD_GEN1(gen));
+ d->gen2 = cpu_to_be32(V_FLD_GEN2(gen));
+}
+
+/**
+ * refill_fl - refill an SGE free-buffer list
+ * @adapter: the adapter
+ * @q: the free-list to refill
+ * @n: the number of new buffers to allocate
+ * @gfp: the gfp flags for allocating new buffers
+ *
+ * (Re)populate an SGE free-buffer list with up to @n new packet buffers,
+ * allocated with the supplied gfp flags. The caller must assure that
+ * @n does not exceed the queue's capacity.
+ */
+static void refill_fl(struct adapter *adap, struct sge_fl *q, int n, gfp_t gfp)
+{
+ struct rx_sw_desc *sd = &q->sdesc[q->pidx];
+ struct rx_desc *d = &q->desc[q->pidx];
+
+ while (n--) {
+ struct sk_buff *skb = alloc_skb(q->buf_size, gfp);
+
+ if (!skb)
+ break;
+
+ add_one_rx_buf(skb, q->buf_size, d, sd, q->gen, adap->pdev);
+ d++;
+ sd++;
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ q->gen ^= 1;
+ sd = q->sdesc;
+ d = q->desc;
+ }
+ q->credits++;
+ }
+
+ t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+}
+
+static inline void __refill_fl(struct adapter *adap, struct sge_fl *fl)
+{
+ refill_fl(adap, fl, min(16U, fl->size - fl->credits), GFP_ATOMIC);
+}
+
+/**
+ * recycle_rx_buf - recycle a receive buffer
+ * @adapter: the adapter
+ * @q: the SGE free list
+ * @idx: index of buffer to recycle
+ *
+ * Recycles the specified buffer on the given free list by adding it at
+ * the next available slot on the list.
+ */
+static void recycle_rx_buf(struct adapter *adap, struct sge_fl *q,
+ unsigned int idx)
+{
+ struct rx_desc *from = &q->desc[idx];
+ struct rx_desc *to = &q->desc[q->pidx];
+
+ q->sdesc[q->pidx] = q->sdesc[idx];
+ to->addr_lo = from->addr_lo; /* already big endian */
+ to->addr_hi = from->addr_hi; /* likewise */
+ wmb();
+ to->len_gen = cpu_to_be32(V_FLD_GEN1(q->gen));
+ to->gen2 = cpu_to_be32(V_FLD_GEN2(q->gen));
+ q->credits++;
+
+ if (++q->pidx == q->size) {
+ q->pidx = 0;
+ q->gen ^= 1;
+ }
+ t3_write_reg(adap, A_SG_KDOORBELL, V_EGRCNTX(q->cntxt_id));
+}
+
+/**
+ * alloc_ring - allocate resources for an SGE descriptor ring
+ * @pdev: the PCI device
+ * @nelem: the number of descriptors
+ * @elem_size: the size of each descriptor
+ * @sw_size: the size of the SW state associated with each ring element
+ * @phys: the physical address of the allocated ring
+ * @metadata: address of the array holding the SW state for the ring
+ *
+ * Allocates resources for an SGE descriptor ring, such as Tx queues,
+ * free buffer lists, or response queues. Each SGE ring requires
+ * space for its HW descriptors plus, optionally, space for the SW state
+ * associated with each HW entry (the metadata). The function returns
+ * three values: the virtual address for the HW ring (the return value
+ * of the function), the physical address of the HW ring, and the address
+ * of the SW ring.
+ */
+static void *alloc_ring(struct pci_dev *pdev, size_t nelem, size_t elem_size,
+ size_t sw_size, dma_addr_t *phys, void *metadata)
+{
+ size_t len = nelem * elem_size;
+ void *s = NULL;
+ void *p = dma_alloc_coherent(&pdev->dev, len, phys, GFP_KERNEL);
+
+ if (!p)
+ return NULL;
+ if (sw_size) {
+ s = kcalloc(nelem, sw_size, GFP_KERNEL);
+
+ if (!s) {
+ dma_free_coherent(&pdev->dev, len, p, *phys);
+ return NULL;
+ }
+ }
+ if (metadata)
+ *(void **)metadata = s;
+ memset(p, 0, len);
+ return p;
+}
+
+/**
+ * free_qset - free the resources of an SGE queue set
+ * @adapter: the adapter owning the queue set
+ * @q: the queue set
+ *
+ * Release the HW and SW resources associated with an SGE queue set, such
+ * as HW contexts, packet buffers, and descriptor rings. Traffic to the
+ * queue set must be quiesced prior to calling this.
+ */
+void t3_free_qset(struct adapter *adapter, struct sge_qset *q)
+{
+ int i;
+ struct pci_dev *pdev = adapter->pdev;
+
+ if (q->tx_reclaim_timer.function)
+ del_timer_sync(&q->tx_reclaim_timer);
+
+ for (i = 0; i < SGE_RXQ_PER_SET; ++i)
+ if (q->fl[i].desc) {
+ spin_lock(&adapter->sge.reg_lock);
+ t3_sge_disable_fl(adapter, q->fl[i].cntxt_id);
+ spin_unlock(&adapter->sge.reg_lock);
+ free_rx_bufs(pdev, &q->fl[i]);
+ kfree(q->fl[i].sdesc);
+ dma_free_coherent(&pdev->dev,
+ q->fl[i].size *
+ sizeof(struct rx_desc), q->fl[i].desc,
+ q->fl[i].phys_addr);
+ }
+
+ for (i = 0; i < SGE_TXQ_PER_SET; ++i)
+ if (q->txq[i].desc) {
+ spin_lock(&adapter->sge.reg_lock);
+ t3_sge_enable_ecntxt(adapter, q->txq[i].cntxt_id, 0);
+ spin_unlock(&adapter->sge.reg_lock);
+ if (q->txq[i].sdesc) {
+ free_tx_desc(adapter, &q->txq[i],
+ q->txq[i].in_use);
+ kfree(q->txq[i].sdesc);
+ }
+ dma_free_coherent(&pdev->dev,
+ q->txq[i].size *
+ sizeof(struct tx_desc),
+ q->txq[i].desc, q->txq[i].phys_addr);
+ __skb_queue_purge(&q->txq[i].sendq);
+ }
+
+ if (q->rspq.desc) {
+ spin_lock(&adapter->sge.reg_lock);
+ t3_sge_disable_rspcntxt(adapter, q->rspq.cntxt_id);
+ spin_unlock(&adapter->sge.reg_lock);
+ dma_free_coherent(&pdev->dev,
+ q->rspq.size * sizeof(struct rsp_desc),
+ q->rspq.desc, q->rspq.phys_addr);
+ }
+
+ if (q->netdev)
+ q->netdev->atalk_ptr = NULL;
+
+ memset(q, 0, sizeof(*q));
+}
+
+/**
+ * init_qset_cntxt - initialize an SGE queue set context info
+ * @qs: the queue set
+ * @id: the queue set id
+ *
+ * Initializes the TIDs and context ids for the queues of a queue set.
+ */
+static void init_qset_cntxt(struct sge_qset *qs, unsigned int id)
+{
+ qs->rspq.cntxt_id = id;
+ qs->fl[0].cntxt_id = 2 * id;
+ qs->fl[1].cntxt_id = 2 * id + 1;
+ qs->txq[TXQ_ETH].cntxt_id = FW_TUNNEL_SGEEC_START + id;
+ qs->txq[TXQ_ETH].token = FW_TUNNEL_TID_START + id;
+ qs->txq[TXQ_OFLD].cntxt_id = FW_OFLD_SGEEC_START + id;
+ qs->txq[TXQ_CTRL].cntxt_id = FW_CTRL_SGEEC_START + id;
+ qs->txq[TXQ_CTRL].token = FW_CTRL_TID_START + id;
+}
+
+/**
+ * sgl_len - calculates the size of an SGL of the given capacity
+ * @n: the number of SGL entries
+ *
+ * Calculates the number of flits needed for a scatter/gather list that
+ * can hold the given number of entries.
+ */
+static inline unsigned int sgl_len(unsigned int n)
+{
+ /* alternatively: 3 * (n / 2) + 2 * (n & 1) */
+ return (3 * n) / 2 + (n & 1);
+}
+
+/**
+ * flits_to_desc - returns the num of Tx descriptors for the given flits
+ * @n: the number of flits
+ *
+ * Calculates the number of Tx descriptors needed for the supplied number
+ * of flits.
+ */
+static inline unsigned int flits_to_desc(unsigned int n)
+{
+ BUG_ON(n >= ARRAY_SIZE(flit_desc_map));
+ return flit_desc_map[n];
+}
+
+/**
+ * get_packet - return the next ingress packet buffer from a free list
+ * @adap: the adapter that received the packet
+ * @fl: the SGE free list holding the packet
+ * @len: the packet length including any SGE padding
+ * @drop_thres: # of remaining buffers before we start dropping packets
+ *
+ * Get the next packet from a free list and complete setup of the
+ * sk_buff. If the packet is small we make a copy and recycle the
+ * original buffer, otherwise we use the original buffer itself. If a
+ * positive drop threshold is supplied packets are dropped and their
+ * buffers recycled if (a) the number of remaining buffers is under the
+ * threshold and the packet is too big to copy, or (b) the packet should
+ * be copied but there is no memory for the copy.
+ */
+static struct sk_buff *get_packet(struct adapter *adap, struct sge_fl *fl,
+ unsigned int len, unsigned int drop_thres)
+{
+ struct sk_buff *skb = NULL;
+ struct rx_sw_desc *sd = &fl->sdesc[fl->cidx];
+
+ prefetch(sd->skb->data);
+
+ if (len <= SGE_RX_COPY_THRES) {
+ skb = alloc_skb(len, GFP_ATOMIC);
+ if (likely(skb != NULL)) {
+ __skb_put(skb, len);
+ pci_dma_sync_single_for_cpu(adap->pdev,
+ pci_unmap_addr(sd,
+ dma_addr),
+ len, PCI_DMA_FROMDEVICE);
+ memcpy(skb->data, sd->skb->data, len);
+ pci_dma_sync_single_for_device(adap->pdev,
+ pci_unmap_addr(sd,
+ dma_addr),
+ len, PCI_DMA_FROMDEVICE);
+ } else if (!drop_thres)
+ goto use_orig_buf;
+ recycle:
+ recycle_rx_buf(adap, fl, fl->cidx);
+ return skb;
+ }
+
+ if (unlikely(fl->credits < drop_thres))
+ goto recycle;
+
+ use_orig_buf:
+ pci_unmap_single(adap->pdev, pci_unmap_addr(sd, dma_addr),
+ fl->buf_size, PCI_DMA_FROMDEVICE);
+ skb = sd->skb;
+ skb_put(skb, len);
+ __refill_fl(adap, fl);
+ return skb;
+}
+
+/**
+ * get_imm_packet - return the next ingress packet buffer from a response
+ * @resp: the response descriptor containing the packet data
+ *
+ * Return a packet containing the immediate data of the given response.
+ */
+static inline struct sk_buff *get_imm_packet(const struct rsp_desc *resp)
+{
+ struct sk_buff *skb = alloc_skb(IMMED_PKT_SIZE, GFP_ATOMIC);
+
+ if (skb) {
+ __skb_put(skb, IMMED_PKT_SIZE);
+ memcpy(skb->data, resp->imm_data, IMMED_PKT_SIZE);
+ }
+ return skb;
+}
+
+/**
+ * calc_tx_descs - calculate the number of Tx descriptors for a packet
+ * @skb: the packet
+ *
+ * Returns the number of Tx descriptors needed for the given Ethernet
+ * packet. Ethernet packets require addition of WR and CPL headers.
+ */
+static inline unsigned int calc_tx_descs(const struct sk_buff *skb)
+{
+ unsigned int flits;
+
+ if (skb->len <= WR_LEN - sizeof(struct cpl_tx_pkt))
+ return 1;
+
+ flits = sgl_len(skb_shinfo(skb)->nr_frags + 1) + 2;
+ if (skb_shinfo(skb)->gso_size)
+ flits++;
+ return flits_to_desc(flits);
+}
+
+/**
+ * make_sgl - populate a scatter/gather list for a packet
+ * @skb: the packet
+ * @sgp: the SGL to populate
+ * @start: start address of skb main body data to include in the SGL
+ * @len: length of skb main body data to include in the SGL
+ * @pdev: the PCI device
+ *
+ * Generates a scatter/gather list for the buffers that make up a packet
+ * and returns the SGL size in 8-byte words. The caller must size the SGL
+ * appropriately.
+ */
+static inline unsigned int make_sgl(const struct sk_buff *skb,
+ struct sg_ent *sgp, unsigned char *start,
+ unsigned int len, struct pci_dev *pdev)
+{
+ dma_addr_t mapping;
+ unsigned int i, j = 0, nfrags;
+
+ if (len) {
+ mapping = pci_map_single(pdev, start, len, PCI_DMA_TODEVICE);
+ sgp->len[0] = cpu_to_be32(len);
+ sgp->addr[0] = cpu_to_be64(mapping);
+ j = 1;
+ }
+
+ nfrags = skb_shinfo(skb)->nr_frags;
+ for (i = 0; i < nfrags; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+
+ mapping = pci_map_page(pdev, frag->page, frag->page_offset,
+ frag->size, PCI_DMA_TODEVICE);
+ sgp->len[j] = cpu_to_be32(frag->size);
+ sgp->addr[j] = cpu_to_be64(mapping);
+ j ^= 1;
+ if (j == 0)
+ ++sgp;
+ }
+ if (j)
+ sgp->len[j] = 0;
+ return ((nfrags + (len != 0)) * 3) / 2 + j;
+}
+
+/**
+ * check_ring_tx_db - check and potentially ring a Tx queue's doorbell
+ * @adap: the adapter
+ * @q: the Tx queue
+ *
+ * Ring the doorbel if a Tx queue is asleep. There is a natural race,
+ * where the HW is going to sleep just after we checked, however,
+ * then the interrupt handler will detect the outstanding TX packet
+ * and ring the doorbell for us.
+ *
+ * When GTS is disabled we unconditionally ring the doorbell.
+ */
+static inline void check_ring_tx_db(struct adapter *adap, struct sge_txq *q)
+{
+#if USE_GTS
+ clear_bit(TXQ_LAST_PKT_DB, &q->flags);
+ if (test_and_set_bit(TXQ_RUNNING, &q->flags) == 0) {
+ set_bit(TXQ_LAST_PKT_DB, &q->flags);
+ t3_write_reg(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ }
+#else
+ wmb(); /* write descriptors before telling HW */
+ t3_write_reg(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+#endif
+}
+
+static inline void wr_gen2(struct tx_desc *d, unsigned int gen)
+{
+#if SGE_NUM_GENBITS == 2
+ d->flit[TX_DESC_FLITS - 1] = cpu_to_be64(gen);
+#endif
+}
+
+/**
+ * write_wr_hdr_sgl - write a WR header and, optionally, SGL
+ * @ndesc: number of Tx descriptors spanned by the SGL
+ * @skb: the packet corresponding to the WR
+ * @d: first Tx descriptor to be written
+ * @pidx: index of above descriptors
+ * @q: the SGE Tx queue
+ * @sgl: the SGL
+ * @flits: number of flits to the start of the SGL in the first descriptor
+ * @sgl_flits: the SGL size in flits
+ * @gen: the Tx descriptor generation
+ * @wr_hi: top 32 bits of WR header based on WR type (big endian)
+ * @wr_lo: low 32 bits of WR header based on WR type (big endian)
+ *
+ * Write a work request header and an associated SGL. If the SGL is
+ * small enough to fit into one Tx descriptor it has already been written
+ * and we just need to write the WR header. Otherwise we distribute the
+ * SGL across the number of descriptors it spans.
+ */
+static void write_wr_hdr_sgl(unsigned int ndesc, struct sk_buff *skb,
+ struct tx_desc *d, unsigned int pidx,
+ const struct sge_txq *q,
+ const struct sg_ent *sgl,
+ unsigned int flits, unsigned int sgl_flits,
+ unsigned int gen, unsigned int wr_hi,
+ unsigned int wr_lo)
+{
+ struct work_request_hdr *wrp = (struct work_request_hdr *)d;
+ struct tx_sw_desc *sd = &q->sdesc[pidx];
+
+ sd->skb = skb;
+ if (need_skb_unmap()) {
+ struct unmap_info *ui = (struct unmap_info *)skb->cb;
+
+ ui->fragidx = 0;
+ ui->addr_idx = 0;
+ ui->sflit = flits;
+ }
+
+ if (likely(ndesc == 1)) {
+ skb->priority = pidx;
+ wrp->wr_hi = htonl(F_WR_SOP | F_WR_EOP | V_WR_DATATYPE(1) |
+ V_WR_SGLSFLT(flits)) | wr_hi;
+ wmb();
+ wrp->wr_lo = htonl(V_WR_LEN(flits + sgl_flits) |
+ V_WR_GEN(gen)) | wr_lo;
+ wr_gen2(d, gen);
+ } else {
+ unsigned int ogen = gen;
+ const u64 *fp = (const u64 *)sgl;
+ struct work_request_hdr *wp = wrp;
+
+ wrp->wr_hi = htonl(F_WR_SOP | V_WR_DATATYPE(1) |
+ V_WR_SGLSFLT(flits)) | wr_hi;
+
+ while (sgl_flits) {
+ unsigned int avail = WR_FLITS - flits;
+
+ if (avail > sgl_flits)
+ avail = sgl_flits;
+ memcpy(&d->flit[flits], fp, avail * sizeof(*fp));
+ sgl_flits -= avail;
+ ndesc--;
+ if (!sgl_flits)
+ break;
+
+ fp += avail;
+ d++;
+ sd++;
+ if (++pidx == q->size) {
+ pidx = 0;
+ gen ^= 1;
+ d = q->desc;
+ sd = q->sdesc;
+ }
+
+ sd->skb = skb;
+ wrp = (struct work_request_hdr *)d;
+ wrp->wr_hi = htonl(V_WR_DATATYPE(1) |
+ V_WR_SGLSFLT(1)) | wr_hi;
+ wrp->wr_lo = htonl(V_WR_LEN(min(WR_FLITS,
+ sgl_flits + 1)) |
+ V_WR_GEN(gen)) | wr_lo;
+ wr_gen2(d, gen);
+ flits = 1;
+ }
+ skb->priority = pidx;
+ wrp->wr_hi |= htonl(F_WR_EOP);
+ wmb();
+ wp->wr_lo = htonl(V_WR_LEN(WR_FLITS) | V_WR_GEN(ogen)) | wr_lo;
+ wr_gen2((struct tx_desc *)wp, ogen);
+ WARN_ON(ndesc != 0);
+ }
+}
+
+/**
+ * write_tx_pkt_wr - write a TX_PKT work request
+ * @adap: the adapter
+ * @skb: the packet to send
+ * @pi: the egress interface
+ * @pidx: index of the first Tx descriptor to write
+ * @gen: the generation value to use
+ * @q: the Tx queue
+ * @ndesc: number of descriptors the packet will occupy
+ * @compl: the value of the COMPL bit to use
+ *
+ * Generate a TX_PKT work request to send the supplied packet.
+ */
+static void write_tx_pkt_wr(struct adapter *adap, struct sk_buff *skb,
+ const struct port_info *pi,
+ unsigned int pidx, unsigned int gen,
+ struct sge_txq *q, unsigned int ndesc,
+ unsigned int compl)
+{
+ unsigned int flits, sgl_flits, cntrl, tso_info;
+ struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
+ struct tx_desc *d = &q->desc[pidx];
+ struct cpl_tx_pkt *cpl = (struct cpl_tx_pkt *)d;
+
+ cpl->len = htonl(skb->len | 0x80000000);
+ cntrl = V_TXPKT_INTF(pi->port_id);
+
+ if (vlan_tx_tag_present(skb) && pi->vlan_grp)
+ cntrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(vlan_tx_tag_get(skb));
+
+ tso_info = V_LSO_MSS(skb_shinfo(skb)->gso_size);
+ if (tso_info) {
+ int eth_type;
+ struct cpl_tx_pkt_lso *hdr = (struct cpl_tx_pkt_lso *)cpl;
+
+ d->flit[2] = 0;
+ cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT_LSO);
+ hdr->cntrl = htonl(cntrl);
+ eth_type = skb->nh.raw - skb->data == ETH_HLEN ?
+ CPL_ETH_II : CPL_ETH_II_VLAN;
+ tso_info |= V_LSO_ETH_TYPE(eth_type) |
+ V_LSO_IPHDR_WORDS(skb->nh.iph->ihl) |
+ V_LSO_TCPHDR_WORDS(skb->h.th->doff);
+ hdr->lso_info = htonl(tso_info);
+ flits = 3;
+ } else {
+ cntrl |= V_TXPKT_OPCODE(CPL_TX_PKT);
+ cntrl |= F_TXPKT_IPCSUM_DIS; /* SW calculates IP csum */
+ cntrl |= V_TXPKT_L4CSUM_DIS(skb->ip_summed != CHECKSUM_PARTIAL);
+ cpl->cntrl = htonl(cntrl);
+
+ if (skb->len <= WR_LEN - sizeof(*cpl)) {
+ q->sdesc[pidx].skb = NULL;
+ if (!skb->data_len)
+ memcpy(&d->flit[2], skb->data, skb->len);
+ else
+ skb_copy_bits(skb, 0, &d->flit[2], skb->len);
+
+ flits = (skb->len + 7) / 8 + 2;
+ cpl->wr.wr_hi = htonl(V_WR_BCNTLFLT(skb->len & 7) |
+ V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT)
+ | F_WR_SOP | F_WR_EOP | compl);
+ wmb();
+ cpl->wr.wr_lo = htonl(V_WR_LEN(flits) | V_WR_GEN(gen) |
+ V_WR_TID(q->token));
+ wr_gen2(d, gen);
+ kfree_skb(skb);
+ return;
+ }
+
+ flits = 2;
+ }
+
+ sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
+ sgl_flits = make_sgl(skb, sgp, skb->data, skb_headlen(skb), adap->pdev);
+ if (need_skb_unmap())
+ ((struct unmap_info *)skb->cb)->len = skb_headlen(skb);
+
+ write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits, gen,
+ htonl(V_WR_OP(FW_WROPCODE_TUNNEL_TX_PKT) | compl),
+ htonl(V_WR_TID(q->token)));
+}
+
+/**
+ * eth_xmit - add a packet to the Ethernet Tx queue
+ * @skb: the packet
+ * @dev: the egress net device
+ *
+ * Add a packet to an SGE Tx queue. Runs with softirqs disabled.
+ */
+int t3_eth_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ unsigned int ndesc, pidx, credits, gen, compl;
+ const struct port_info *pi = netdev_priv(dev);
+ struct adapter *adap = dev->priv;
+ struct sge_qset *qs = dev2qset(dev);
+ struct sge_txq *q = &qs->txq[TXQ_ETH];
+
+ /*
+ * The chip min packet length is 9 octets but play safe and reject
+ * anything shorter than an Ethernet header.
+ */
+ if (unlikely(skb->len < ETH_HLEN)) {
+ dev_kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
+
+ spin_lock(&q->lock);
+ reclaim_completed_tx(adap, q);
+
+ credits = q->size - q->in_use;
+ ndesc = calc_tx_descs(skb);
+
+ if (unlikely(credits < ndesc)) {
+ if (!netif_queue_stopped(dev)) {
+ netif_stop_queue(dev);
+ set_bit(TXQ_ETH, &qs->txq_stopped);
+ q->stops++;
+ dev_err(&adap->pdev->dev,
+ "%s: Tx ring %u full while queue awake!\n",
+ dev->name, q->cntxt_id & 7);
+ }
+ spin_unlock(&q->lock);
+ return NETDEV_TX_BUSY;
+ }
+
+ q->in_use += ndesc;
+ if (unlikely(credits - ndesc < q->stop_thres)) {
+ q->stops++;
+ netif_stop_queue(dev);
+ set_bit(TXQ_ETH, &qs->txq_stopped);
+#if !USE_GTS
+ if (should_restart_tx(q) &&
+ test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
+ q->restarts++;
+ netif_wake_queue(dev);
+ }
+#endif
+ }
+
+ gen = q->gen;
+ q->unacked += ndesc;
+ compl = (q->unacked & 8) << (S_WR_COMPL - 3);
+ q->unacked &= 7;
+ pidx = q->pidx;
+ q->pidx += ndesc;
+ if (q->pidx >= q->size) {
+ q->pidx -= q->size;
+ q->gen ^= 1;
+ }
+
+ /* update port statistics */
+ if (skb->ip_summed == CHECKSUM_COMPLETE)
+ qs->port_stats[SGE_PSTAT_TX_CSUM]++;
+ if (skb_shinfo(skb)->gso_size)
+ qs->port_stats[SGE_PSTAT_TSO]++;
+ if (vlan_tx_tag_present(skb) && pi->vlan_grp)
+ qs->port_stats[SGE_PSTAT_VLANINS]++;
+
+ dev->trans_start = jiffies;
+ spin_unlock(&q->lock);
+
+ /*
+ * We do not use Tx completion interrupts to free DMAd Tx packets.
+ * This is good for performamce but means that we rely on new Tx
+ * packets arriving to run the destructors of completed packets,
+ * which open up space in their sockets' send queues. Sometimes
+ * we do not get such new packets causing Tx to stall. A single
+ * UDP transmitter is a good example of this situation. We have
+ * a clean up timer that periodically reclaims completed packets
+ * but it doesn't run often enough (nor do we want it to) to prevent
+ * lengthy stalls. A solution to this problem is to run the
+ * destructor early, after the packet is queued but before it's DMAd.
+ * A cons is that we lie to socket memory accounting, but the amount
+ * of extra memory is reasonable (limited by the number of Tx
+ * descriptors), the packets do actually get freed quickly by new
+ * packets almost always, and for protocols like TCP that wait for
+ * acks to really free up the data the extra memory is even less.
+ * On the positive side we run the destructors on the sending CPU
+ * rather than on a potentially different completing CPU, usually a
+ * good thing. We also run them without holding our Tx queue lock,
+ * unlike what reclaim_completed_tx() would otherwise do.
+ *
+ * Run the destructor before telling the DMA engine about the packet
+ * to make sure it doesn't complete and get freed prematurely.
+ */
+ if (likely(!skb_shared(skb)))
+ skb_orphan(skb);
+
+ write_tx_pkt_wr(adap, skb, pi, pidx, gen, q, ndesc, compl);
+ check_ring_tx_db(adap, q);
+ return NETDEV_TX_OK;
+}
+
+/**
+ * write_imm - write a packet into a Tx descriptor as immediate data
+ * @d: the Tx descriptor to write
+ * @skb: the packet
+ * @len: the length of packet data to write as immediate data
+ * @gen: the generation bit value to write
+ *
+ * Writes a packet as immediate data into a Tx descriptor. The packet
+ * contains a work request at its beginning. We must write the packet
+ * carefully so the SGE doesn't read accidentally before it's written in
+ * its entirety.
+ */
+static inline void write_imm(struct tx_desc *d, struct sk_buff *skb,
+ unsigned int len, unsigned int gen)
+{
+ struct work_request_hdr *from = (struct work_request_hdr *)skb->data;
+ struct work_request_hdr *to = (struct work_request_hdr *)d;
+
+ memcpy(&to[1], &from[1], len - sizeof(*from));
+ to->wr_hi = from->wr_hi | htonl(F_WR_SOP | F_WR_EOP |
+ V_WR_BCNTLFLT(len & 7));
+ wmb();
+ to->wr_lo = from->wr_lo | htonl(V_WR_GEN(gen) |
+ V_WR_LEN((len + 7) / 8));
+ wr_gen2(d, gen);
+ kfree_skb(skb);
+}
+
+/**
+ * check_desc_avail - check descriptor availability on a send queue
+ * @adap: the adapter
+ * @q: the send queue
+ * @skb: the packet needing the descriptors
+ * @ndesc: the number of Tx descriptors needed
+ * @qid: the Tx queue number in its queue set (TXQ_OFLD or TXQ_CTRL)
+ *
+ * Checks if the requested number of Tx descriptors is available on an
+ * SGE send queue. If the queue is already suspended or not enough
+ * descriptors are available the packet is queued for later transmission.
+ * Must be called with the Tx queue locked.
+ *
+ * Returns 0 if enough descriptors are available, 1 if there aren't
+ * enough descriptors and the packet has been queued, and 2 if the caller
+ * needs to retry because there weren't enough descriptors at the
+ * beginning of the call but some freed up in the mean time.
+ */
+static inline int check_desc_avail(struct adapter *adap, struct sge_txq *q,
+ struct sk_buff *skb, unsigned int ndesc,
+ unsigned int qid)
+{
+ if (unlikely(!skb_queue_empty(&q->sendq))) {
+ addq_exit:__skb_queue_tail(&q->sendq, skb);
+ return 1;
+ }
+ if (unlikely(q->size - q->in_use < ndesc)) {
+ struct sge_qset *qs = txq_to_qset(q, qid);
+
+ set_bit(qid, &qs->txq_stopped);
+ smp_mb__after_clear_bit();
+
+ if (should_restart_tx(q) &&
+ test_and_clear_bit(qid, &qs->txq_stopped))
+ return 2;
+
+ q->stops++;
+ goto addq_exit;
+ }
+ return 0;
+}
+
+/**
+ * reclaim_completed_tx_imm - reclaim completed control-queue Tx descs
+ * @q: the SGE control Tx queue
+ *
+ * This is a variant of reclaim_completed_tx() that is used for Tx queues
+ * that send only immediate data (presently just the control queues) and
+ * thus do not have any sk_buffs to release.
+ */
+static inline void reclaim_completed_tx_imm(struct sge_txq *q)
+{
+ unsigned int reclaim = q->processed - q->cleaned;
+
+ q->in_use -= reclaim;
+ q->cleaned += reclaim;
+}
+
+static inline int immediate(const struct sk_buff *skb)
+{
+ return skb->len <= WR_LEN && !skb->data_len;
+}
+
+/**
+ * ctrl_xmit - send a packet through an SGE control Tx queue
+ * @adap: the adapter
+ * @q: the control queue
+ * @skb: the packet
+ *
+ * Send a packet through an SGE control Tx queue. Packets sent through
+ * a control queue must fit entirely as immediate data in a single Tx
+ * descriptor and have no page fragments.
+ */
+static int ctrl_xmit(struct adapter *adap, struct sge_txq *q,
+ struct sk_buff *skb)
+{
+ int ret;
+ struct work_request_hdr *wrp = (struct work_request_hdr *)skb->data;
+
+ if (unlikely(!immediate(skb))) {
+ WARN_ON(1);
+ dev_kfree_skb(skb);
+ return NET_XMIT_SUCCESS;
+ }
+
+ wrp->wr_hi |= htonl(F_WR_SOP | F_WR_EOP);
+ wrp->wr_lo = htonl(V_WR_TID(q->token));
+
+ spin_lock(&q->lock);
+ again:reclaim_completed_tx_imm(q);
+
+ ret = check_desc_avail(adap, q, skb, 1, TXQ_CTRL);
+ if (unlikely(ret)) {
+ if (ret == 1) {
+ spin_unlock(&q->lock);
+ return NET_XMIT_CN;
+ }
+ goto again;
+ }
+
+ write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
+
+ q->in_use++;
+ if (++q->pidx >= q->size) {
+ q->pidx = 0;
+ q->gen ^= 1;
+ }
+ spin_unlock(&q->lock);
+ wmb();
+ t3_write_reg(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+ return NET_XMIT_SUCCESS;
+}
+
+/**
+ * restart_ctrlq - restart a suspended control queue
+ * @qs: the queue set cotaining the control queue
+ *
+ * Resumes transmission on a suspended Tx control queue.
+ */
+static void restart_ctrlq(unsigned long data)
+{
+ struct sk_buff *skb;
+ struct sge_qset *qs = (struct sge_qset *)data;
+ struct sge_txq *q = &qs->txq[TXQ_CTRL];
+ struct adapter *adap = qs->netdev->priv;
+
+ spin_lock(&q->lock);
+ again:reclaim_completed_tx_imm(q);
+
+ while (q->in_use < q->size && (skb = __skb_dequeue(&q->sendq)) != NULL) {
+
+ write_imm(&q->desc[q->pidx], skb, skb->len, q->gen);
+
+ if (++q->pidx >= q->size) {
+ q->pidx = 0;
+ q->gen ^= 1;
+ }
+ q->in_use++;
+ }
+
+ if (!skb_queue_empty(&q->sendq)) {
+ set_bit(TXQ_CTRL, &qs->txq_stopped);
+ smp_mb__after_clear_bit();
+
+ if (should_restart_tx(q) &&
+ test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped))
+ goto again;
+ q->stops++;
+ }
+
+ spin_unlock(&q->lock);
+ t3_write_reg(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+}
+
+/*
+ * Send a management message through control queue 0
+ */
+int t3_mgmt_tx(struct adapter *adap, struct sk_buff *skb)
+{
+ return ctrl_xmit(adap, &adap->sge.qs[0].txq[TXQ_CTRL], skb);
+}
+
+/**
+ * write_ofld_wr - write an offload work request
+ * @adap: the adapter
+ * @skb: the packet to send
+ * @q: the Tx queue
+ * @pidx: index of the first Tx descriptor to write
+ * @gen: the generation value to use
+ * @ndesc: number of descriptors the packet will occupy
+ *
+ * Write an offload work request to send the supplied packet. The packet
+ * data already carry the work request with most fields populated.
+ */
+static void write_ofld_wr(struct adapter *adap, struct sk_buff *skb,
+ struct sge_txq *q, unsigned int pidx,
+ unsigned int gen, unsigned int ndesc)
+{
+ unsigned int sgl_flits, flits;
+ struct work_request_hdr *from;
+ struct sg_ent *sgp, sgl[MAX_SKB_FRAGS / 2 + 1];
+ struct tx_desc *d = &q->desc[pidx];
+
+ if (immediate(skb)) {
+ q->sdesc[pidx].skb = NULL;
+ write_imm(d, skb, skb->len, gen);
+ return;
+ }
+
+ /* Only TX_DATA builds SGLs */
+
+ from = (struct work_request_hdr *)skb->data;
+ memcpy(&d->flit[1], &from[1], skb->h.raw - skb->data - sizeof(*from));
+
+ flits = (skb->h.raw - skb->data) / 8;
+ sgp = ndesc == 1 ? (struct sg_ent *)&d->flit[flits] : sgl;
+ sgl_flits = make_sgl(skb, sgp, skb->h.raw, skb->tail - skb->h.raw,
+ adap->pdev);
+ if (need_skb_unmap())
+ ((struct unmap_info *)skb->cb)->len = skb->tail - skb->h.raw;
+
+ write_wr_hdr_sgl(ndesc, skb, d, pidx, q, sgl, flits, sgl_flits,
+ gen, from->wr_hi, from->wr_lo);
+}
+
+/**
+ * calc_tx_descs_ofld - calculate # of Tx descriptors for an offload packet
+ * @skb: the packet
+ *
+ * Returns the number of Tx descriptors needed for the given offload
+ * packet. These packets are already fully constructed.
+ */
+static inline unsigned int calc_tx_descs_ofld(const struct sk_buff *skb)
+{
+ unsigned int flits, cnt = skb_shinfo(skb)->nr_frags;
+
+ if (skb->len <= WR_LEN && cnt == 0)
+ return 1; /* packet fits as immediate data */
+
+ flits = (skb->h.raw - skb->data) / 8; /* headers */
+ if (skb->tail != skb->h.raw)
+ cnt++;
+ return flits_to_desc(flits + sgl_len(cnt));
+}
+
+/**
+ * ofld_xmit - send a packet through an offload queue
+ * @adap: the adapter
+ * @q: the Tx offload queue
+ * @skb: the packet
+ *
+ * Send an offload packet through an SGE offload queue.
+ */
+static int ofld_xmit(struct adapter *adap, struct sge_txq *q,
+ struct sk_buff *skb)
+{
+ int ret;
+ unsigned int ndesc = calc_tx_descs_ofld(skb), pidx, gen;
+
+ spin_lock(&q->lock);
+ again:reclaim_completed_tx(adap, q);
+
+ ret = check_desc_avail(adap, q, skb, ndesc, TXQ_OFLD);
+ if (unlikely(ret)) {
+ if (ret == 1) {
+ skb->priority = ndesc; /* save for restart */
+ spin_unlock(&q->lock);
+ return NET_XMIT_CN;
+ }
+ goto again;
+ }
+
+ gen = q->gen;
+ q->in_use += ndesc;
+ pidx = q->pidx;
+ q->pidx += ndesc;
+ if (q->pidx >= q->size) {
+ q->pidx -= q->size;
+ q->gen ^= 1;
+ }
+ spin_unlock(&q->lock);
+
+ write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
+ check_ring_tx_db(adap, q);
+ return NET_XMIT_SUCCESS;
+}
+
+/**
+ * restart_offloadq - restart a suspended offload queue
+ * @qs: the queue set cotaining the offload queue
+ *
+ * Resumes transmission on a suspended Tx offload queue.
+ */
+static void restart_offloadq(unsigned long data)
+{
+ struct sk_buff *skb;
+ struct sge_qset *qs = (struct sge_qset *)data;
+ struct sge_txq *q = &qs->txq[TXQ_OFLD];
+ struct adapter *adap = qs->netdev->priv;
+
+ spin_lock(&q->lock);
+ again:reclaim_completed_tx(adap, q);
+
+ while ((skb = skb_peek(&q->sendq)) != NULL) {
+ unsigned int gen, pidx;
+ unsigned int ndesc = skb->priority;
+
+ if (unlikely(q->size - q->in_use < ndesc)) {
+ set_bit(TXQ_OFLD, &qs->txq_stopped);
+ smp_mb__after_clear_bit();
+
+ if (should_restart_tx(q) &&
+ test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped))
+ goto again;
+ q->stops++;
+ break;
+ }
+
+ gen = q->gen;
+ q->in_use += ndesc;
+ pidx = q->pidx;
+ q->pidx += ndesc;
+ if (q->pidx >= q->size) {
+ q->pidx -= q->size;
+ q->gen ^= 1;
+ }
+ __skb_unlink(skb, &q->sendq);
+ spin_unlock(&q->lock);
+
+ write_ofld_wr(adap, skb, q, pidx, gen, ndesc);
+ spin_lock(&q->lock);
+ }
+ spin_unlock(&q->lock);
+
+#if USE_GTS
+ set_bit(TXQ_RUNNING, &q->flags);
+ set_bit(TXQ_LAST_PKT_DB, &q->flags);
+#endif
+ t3_write_reg(adap, A_SG_KDOORBELL,
+ F_SELEGRCNTX | V_EGRCNTX(q->cntxt_id));
+}
+
+/**
+ * queue_set - return the queue set a packet should use
+ * @skb: the packet
+ *
+ * Maps a packet to the SGE queue set it should use. The desired queue
+ * set is carried in bits 1-3 in the packet's priority.
+ */
+static inline int queue_set(const struct sk_buff *skb)
+{
+ return skb->priority >> 1;
+}
+
+/**
+ * is_ctrl_pkt - return whether an offload packet is a control packet
+ * @skb: the packet
+ *
+ * Determines whether an offload packet should use an OFLD or a CTRL
+ * Tx queue. This is indicated by bit 0 in the packet's priority.
+ */
+static inline int is_ctrl_pkt(const struct sk_buff *skb)
+{
+ return skb->priority & 1;
+}
+
+/**
+ * t3_offload_tx - send an offload packet
+ * @tdev: the offload device to send to
+ * @skb: the packet
+ *
+ * Sends an offload packet. We use the packet priority to select the
+ * appropriate Tx queue as follows: bit 0 indicates whether the packet
+ * should be sent as regular or control, bits 1-3 select the queue set.
+ */
+int t3_offload_tx(struct t3cdev *tdev, struct sk_buff *skb)
+{
+ struct adapter *adap = tdev2adap(tdev);
+ struct sge_qset *qs = &adap->sge.qs[queue_set(skb)];
+
+ if (unlikely(is_ctrl_pkt(skb)))
+ return ctrl_xmit(adap, &qs->txq[TXQ_CTRL], skb);
+
+ return ofld_xmit(adap, &qs->txq[TXQ_OFLD], skb);
+}
+
+/**
+ * offload_enqueue - add an offload packet to an SGE offload receive queue
+ * @q: the SGE response queue
+ * @skb: the packet
+ *
+ * Add a new offload packet to an SGE response queue's offload packet
+ * queue. If the packet is the first on the queue it schedules the RX
+ * softirq to process the queue.
+ */
+static inline void offload_enqueue(struct sge_rspq *q, struct sk_buff *skb)
+{
+ skb->next = skb->prev = NULL;
+ if (q->rx_tail)
+ q->rx_tail->next = skb;
+ else {
+ struct sge_qset *qs = rspq_to_qset(q);
+
+ if (__netif_rx_schedule_prep(qs->netdev))
+ __netif_rx_schedule(qs->netdev);
+ q->rx_head = skb;
+ }
+ q->rx_tail = skb;
+}
+
+/**
+ * deliver_partial_bundle - deliver a (partial) bundle of Rx offload pkts
+ * @tdev: the offload device that will be receiving the packets
+ * @q: the SGE response queue that assembled the bundle
+ * @skbs: the partial bundle
+ * @n: the number of packets in the bundle
+ *
+ * Delivers a (partial) bundle of Rx offload packets to an offload device.
+ */
+static inline void deliver_partial_bundle(struct t3cdev *tdev,
+ struct sge_rspq *q,
+ struct sk_buff *skbs[], int n)
+{
+ if (n) {
+ q->offload_bundles++;
+ tdev->recv(tdev, skbs, n);
+ }
+}
+
+/**
+ * ofld_poll - NAPI handler for offload packets in interrupt mode
+ * @dev: the network device doing the polling
+ * @budget: polling budget
+ *
+ * The NAPI handler for offload packets when a response queue is serviced
+ * by the hard interrupt handler, i.e., when it's operating in non-polling
+ * mode. Creates small packet batches and sends them through the offload
+ * receive handler. Batches need to be of modest size as we do prefetches
+ * on the packets in each.
+ */
+static int ofld_poll(struct net_device *dev, int *budget)
+{
+ struct adapter *adapter = dev->priv;
+ struct sge_qset *qs = dev2qset(dev);
+ struct sge_rspq *q = &qs->rspq;
+ int work_done, limit = min(*budget, dev->quota), avail = limit;
+
+ while (avail) {
+ struct sk_buff *head, *tail, *skbs[RX_BUNDLE_SIZE];
+ int ngathered;
+
+ spin_lock_irq(&q->lock);
+ head = q->rx_head;
+ if (!head) {
+ work_done = limit - avail;
+ *budget -= work_done;
+ dev->quota -= work_done;
+ __netif_rx_complete(dev);
+ spin_unlock_irq(&q->lock);
+ return 0;
+ }
+
+ tail = q->rx_tail;
+ q->rx_head = q->rx_tail = NULL;
+ spin_unlock_irq(&q->lock);
+
+ for (ngathered = 0; avail && head; avail--) {
+ prefetch(head->data);
+ skbs[ngathered] = head;
+ head = head->next;
+ skbs[ngathered]->next = NULL;
+ if (++ngathered == RX_BUNDLE_SIZE) {
+ q->offload_bundles++;
+ adapter->tdev.recv(&adapter->tdev, skbs,
+ ngathered);
+ ngathered = 0;
+ }
+ }
+ if (head) { /* splice remaining packets back onto Rx queue */
+ spin_lock_irq(&q->lock);
+ tail->next = q->rx_head;
+ if (!q->rx_head)
+ q->rx_tail = tail;
+ q->rx_head = head;
+ spin_unlock_irq(&q->lock);
+ }
+ deliver_partial_bundle(&adapter->tdev, q, skbs, ngathered);
+ }
+ work_done = limit - avail;
+ *budget -= work_done;
+ dev->quota -= work_done;
+ return 1;
+}
+
+/**
+ * rx_offload - process a received offload packet
+ * @tdev: the offload device receiving the packet
+ * @rq: the response queue that received the packet
+ * @skb: the packet
+ * @rx_gather: a gather list of packets if we are building a bundle
+ * @gather_idx: index of the next available slot in the bundle
+ *
+ * Process an ingress offload pakcet and add it to the offload ingress
+ * queue. Returns the index of the next available slot in the bundle.
+ */
+static inline int rx_offload(struct t3cdev *tdev, struct sge_rspq *rq,
+ struct sk_buff *skb, struct sk_buff *rx_gather[],
+ unsigned int gather_idx)
+{
+ rq->offload_pkts++;
+ skb->mac.raw = skb->nh.raw = skb->h.raw = skb->data;
+
+ if (rq->polling) {
+ rx_gather[gather_idx++] = skb;
+ if (gather_idx == RX_BUNDLE_SIZE) {
+ tdev->recv(tdev, rx_gather, RX_BUNDLE_SIZE);
+ gather_idx = 0;
+ rq->offload_bundles++;
+ }
+ } else
+ offload_enqueue(rq, skb);
+
+ return gather_idx;
+}
+
+/**
+ * restart_tx - check whether to restart suspended Tx queues
+ * @qs: the queue set to resume
+ *
+ * Restarts suspended Tx queues of an SGE queue set if they have enough
+ * free resources to resume operation.
+ */
+static void restart_tx(struct sge_qset *qs)
+{
+ if (test_bit(TXQ_ETH, &qs->txq_stopped) &&
+ should_restart_tx(&qs->txq[TXQ_ETH]) &&
+ test_and_clear_bit(TXQ_ETH, &qs->txq_stopped)) {
+ qs->txq[TXQ_ETH].restarts++;
+ if (netif_running(qs->netdev))
+ netif_wake_queue(qs->netdev);
+ }
+
+ if (test_bit(TXQ_OFLD, &qs->txq_stopped) &&
+ should_restart_tx(&qs->txq[TXQ_OFLD]) &&
+ test_and_clear_bit(TXQ_OFLD, &qs->txq_stopped)) {
+ qs->txq[TXQ_OFLD].restarts++;
+ tasklet_schedule(&qs->txq[TXQ_OFLD].qresume_tsk);
+ }
+ if (test_bit(TXQ_CTRL, &qs->txq_stopped) &&
+ should_restart_tx(&qs->txq[TXQ_CTRL]) &&
+ test_and_clear_bit(TXQ_CTRL, &qs->txq_stopped)) {
+ qs->txq[TXQ_CTRL].restarts++;
+ tasklet_schedule(&qs->txq[TXQ_CTRL].qresume_tsk);
+ }
+}
+
+/**
+ * rx_eth - process an ingress ethernet packet
+ * @adap: the adapter
+ * @rq: the response queue that received the packet
+ * @skb: the packet
+ * @pad: amount of padding at the start of the buffer
+ *
+ * Process an ingress ethernet pakcet and deliver it to the stack.
+ * The padding is 2 if the packet was delivered in an Rx buffer and 0
+ * if it was immediate data in a response.
+ */
+static void rx_eth(struct adapter *adap, struct sge_rspq *rq,
+ struct sk_buff *skb, int pad)
+{
+ struct cpl_rx_pkt *p = (struct cpl_rx_pkt *)(skb->data + pad);
+ struct port_info *pi;
+
+ rq->eth_pkts++;
+ skb_pull(skb, sizeof(*p) + pad);
+ skb->dev = adap->port[p->iff];
+ skb->dev->last_rx = jiffies;
+ skb->protocol = eth_type_trans(skb, skb->dev);
+ pi = netdev_priv(skb->dev);
+ if (pi->rx_csum_offload && p->csum_valid && p->csum == 0xffff &&
+ !p->fragment) {
+ rspq_to_qset(rq)->port_stats[SGE_PSTAT_RX_CSUM_GOOD]++;
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ if (unlikely(p->vlan_valid)) {
+ struct vlan_group *grp = pi->vlan_grp;
+
+ rspq_to_qset(rq)->port_stats[SGE_PSTAT_VLANEX]++;
+ if (likely(grp))
+ __vlan_hwaccel_rx(skb, grp, ntohs(p->vlan),
+ rq->polling);
+ else
+ dev_kfree_skb_any(skb);
+ } else if (rq->polling)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
+}
+
+/**
+ * handle_rsp_cntrl_info - handles control information in a response
+ * @qs: the queue set corresponding to the response
+ * @flags: the response control flags
+ *
+ * Handles the control information of an SGE response, such as GTS
+ * indications and completion credits for the queue set's Tx queues.
+ * HW coalesces credits, we don't do any extra SW coalescing.
+ */
+static inline void handle_rsp_cntrl_info(struct sge_qset *qs, u32 flags)
+{
+ unsigned int credits;
+
+#if USE_GTS
+ if (flags & F_RSPD_TXQ0_GTS)
+ clear_bit(TXQ_RUNNING, &qs->txq[TXQ_ETH].flags);
+#endif
+
+ credits = G_RSPD_TXQ0_CR(flags);
+ if (credits)
+ qs->txq[TXQ_ETH].processed += credits;
+
+ credits = G_RSPD_TXQ2_CR(flags);
+ if (credits)
+ qs->txq[TXQ_CTRL].processed += credits;
+
+# if USE_GTS
+ if (flags & F_RSPD_TXQ1_GTS)
+ clear_bit(TXQ_RUNNING, &qs->txq[TXQ_OFLD].flags);
+# endif
+ credits = G_RSPD_TXQ1_CR(flags);
+ if (credits)
+ qs->txq[TXQ_OFLD].processed += credits;
+}
+
+/**
+ * check_ring_db - check if we need to ring any doorbells
+ * @adapter: the adapter
+ * @qs: the queue set whose Tx queues are to be examined
+ * @sleeping: indicates which Tx queue sent GTS
+ *
+ * Checks if some of a queue set's Tx queues need to ring their doorbells
+ * to resume transmission after idling while they still have unprocessed
+ * descriptors.
+ */
+static void check_ring_db(struct adapter *adap, struct sge_qset *qs,
+ unsigned int sleeping)
+{
+ if (sleeping & F_RSPD_TXQ0_GTS) {
+ struct sge_txq *txq = &qs->txq[TXQ_ETH];
+
+ if (txq->cleaned + txq->in_use != txq->processed &&
+ !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
+ set_bit(TXQ_RUNNING, &txq->flags);
+ t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
+ V_EGRCNTX(txq->cntxt_id));
+ }
+ }
+
+ if (sleeping & F_RSPD_TXQ1_GTS) {
+ struct sge_txq *txq = &qs->txq[TXQ_OFLD];
+
+ if (txq->cleaned + txq->in_use != txq->processed &&
+ !test_and_set_bit(TXQ_LAST_PKT_DB, &txq->flags)) {
+ set_bit(TXQ_RUNNING, &txq->flags);
+ t3_write_reg(adap, A_SG_KDOORBELL, F_SELEGRCNTX |
+ V_EGRCNTX(txq->cntxt_id));
+ }
+ }
+}
+
+/**
+ * is_new_response - check if a response is newly written
+ * @r: the response descriptor
+ * @q: the response queue
+ *
+ * Returns true if a response descriptor contains a yet unprocessed
+ * response.
+ */
+static inline int is_new_response(const struct rsp_desc *r,
+ const struct sge_rspq *q)
+{
+ return (r->intr_gen & F_RSPD_GEN2) == q->gen;
+}
+
+#define RSPD_GTS_MASK (F_RSPD_TXQ0_GTS | F_RSPD_TXQ1_GTS)
+#define RSPD_CTRL_MASK (RSPD_GTS_MASK | \
+ V_RSPD_TXQ0_CR(M_RSPD_TXQ0_CR) | \
+ V_RSPD_TXQ1_CR(M_RSPD_TXQ1_CR) | \
+ V_RSPD_TXQ2_CR(M_RSPD_TXQ2_CR))
+
+/* How long to delay the next interrupt in case of memory shortage, in 0.1us. */
+#define NOMEM_INTR_DELAY 2500
+
+/**
+ * process_responses - process responses from an SGE response queue
+ * @adap: the adapter
+ * @qs: the queue set to which the response queue belongs
+ * @budget: how many responses can be processed in this round
+ *
+ * Process responses from an SGE response queue up to the supplied budget.
+ * Responses include received packets as well as credits and other events
+ * for the queues that belong to the response queue's queue set.
+ * A negative budget is effectively unlimited.
+ *
+ * Additionally choose the interrupt holdoff time for the next interrupt
+ * on this queue. If the system is under memory shortage use a fairly
+ * long delay to help recovery.
+ */
+static int process_responses(struct adapter *adap, struct sge_qset *qs,
+ int budget)
+{
+ struct sge_rspq *q = &qs->rspq;
+ struct rsp_desc *r = &q->desc[q->cidx];
+ int budget_left = budget;
+ unsigned int sleeping = 0;
+ struct sk_buff *offload_skbs[RX_BUNDLE_SIZE];
+ int ngathered = 0;
+
+ q->next_holdoff = q->holdoff_tmr;
+
+ while (likely(budget_left && is_new_response(r, q))) {
+ int eth, ethpad = 0;
+ struct sk_buff *skb = NULL;
+ u32 len, flags = ntohl(r->flags);
+ u32 rss_hi = *(const u32 *)r, rss_lo = r->rss_hdr.rss_hash_val;
+
+ eth = r->rss_hdr.opcode == CPL_RX_PKT;
+
+ if (unlikely(flags & F_RSPD_ASYNC_NOTIF)) {
+ skb = alloc_skb(AN_PKT_SIZE, GFP_ATOMIC);
+ if (!skb)
+ goto no_mem;
+
+ memcpy(__skb_put(skb, AN_PKT_SIZE), r, AN_PKT_SIZE);
+ skb->data[0] = CPL_ASYNC_NOTIF;
+ rss_hi = htonl(CPL_ASYNC_NOTIF << 24);
+ q->async_notif++;
+ } else if (flags & F_RSPD_IMM_DATA_VALID) {
+ skb = get_imm_packet(r);
+ if (unlikely(!skb)) {
+ no_mem:
+ q->next_holdoff = NOMEM_INTR_DELAY;
+ q->nomem++;
+ /* consume one credit since we tried */
+ budget_left--;
+ break;
+ }
+ q->imm_data++;
+ } else if ((len = ntohl(r->len_cq)) != 0) {
+ struct sge_fl *fl;
+
+ fl = (len & F_RSPD_FLQ) ? &qs->fl[1] : &qs->fl[0];
+ fl->credits--;
+ skb = get_packet(adap, fl, G_RSPD_LEN(len),
+ eth ? SGE_RX_DROP_THRES : 0);
+ if (!skb)
+ q->rx_drops++;
+ else if (r->rss_hdr.opcode == CPL_TRACE_PKT)
+ __skb_pull(skb, 2);
+ ethpad = 2;
+ if (++fl->cidx == fl->size)
+ fl->cidx = 0;
+ } else
+ q->pure_rsps++;
+
+ if (flags & RSPD_CTRL_MASK) {
+ sleeping |= flags & RSPD_GTS_MASK;
+ handle_rsp_cntrl_info(qs, flags);
+ }
+
+ r++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->gen ^= 1;
+ r = q->desc;
+ }
+ prefetch(r);
+
+ if (++q->credits >= (q->size / 4)) {
+ refill_rspq(adap, q, q->credits);
+ q->credits = 0;
+ }
+
+ if (likely(skb != NULL)) {
+ if (eth)
+ rx_eth(adap, q, skb, ethpad);
+ else {
+ /* Preserve the RSS info in csum & priority */
+ skb->csum = rss_hi;
+ skb->priority = rss_lo;
+ ngathered = rx_offload(&adap->tdev, q, skb,
+ offload_skbs, ngathered);
+ }
+ }
+
+ --budget_left;
+ }
+
+ deliver_partial_bundle(&adap->tdev, q, offload_skbs, ngathered);
+ if (sleeping)
+ check_ring_db(adap, qs, sleeping);
+
+ smp_mb(); /* commit Tx queue .processed updates */
+ if (unlikely(qs->txq_stopped != 0))
+ restart_tx(qs);
+
+ budget -= budget_left;
+ return budget;
+}
+
+static inline int is_pure_response(const struct rsp_desc *r)
+{
+ u32 n = ntohl(r->flags) & (F_RSPD_ASYNC_NOTIF | F_RSPD_IMM_DATA_VALID);
+
+ return (n | r->len_cq) == 0;
+}
+
+/**
+ * napi_rx_handler - the NAPI handler for Rx processing
+ * @dev: the net device
+ * @budget: how many packets we can process in this round
+ *
+ * Handler for new data events when using NAPI.
+ */
+static int napi_rx_handler(struct net_device *dev, int *budget)
+{
+ struct adapter *adap = dev->priv;
+ struct sge_qset *qs = dev2qset(dev);
+ int effective_budget = min(*budget, dev->quota);
+
+ int work_done = process_responses(adap, qs, effective_budget);
+ *budget -= work_done;
+ dev->quota -= work_done;
+
+ if (work_done >= effective_budget)
+ return 1;
+
+ netif_rx_complete(dev);
+
+ /*
+ * Because we don't atomically flush the following write it is
+ * possible that in very rare cases it can reach the device in a way
+ * that races with a new response being written plus an error interrupt
+ * causing the NAPI interrupt handler below to return unhandled status
+ * to the OS. To protect against this would require flushing the write
+ * and doing both the write and the flush with interrupts off. Way too
+ * expensive and unjustifiable given the rarity of the race.
+ *
+ * The race cannot happen at all with MSI-X.
+ */
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(qs->rspq.cntxt_id) |
+ V_NEWTIMER(qs->rspq.next_holdoff) |
+ V_NEWINDEX(qs->rspq.cidx));
+ return 0;
+}
+
+/*
+ * Returns true if the device is already scheduled for polling.
+ */
+static inline int napi_is_scheduled(struct net_device *dev)
+{
+ return test_bit(__LINK_STATE_RX_SCHED, &dev->state);
+}
+
+/**
+ * process_pure_responses - process pure responses from a response queue
+ * @adap: the adapter
+ * @qs: the queue set owning the response queue
+ * @r: the first pure response to process
+ *
+ * A simpler version of process_responses() that handles only pure (i.e.,
+ * non data-carrying) responses. Such respones are too light-weight to
+ * justify calling a softirq under NAPI, so we handle them specially in
+ * the interrupt handler. The function is called with a pointer to a
+ * response, which the caller must ensure is a valid pure response.
+ *
+ * Returns 1 if it encounters a valid data-carrying response, 0 otherwise.
+ */
+static int process_pure_responses(struct adapter *adap, struct sge_qset *qs,
+ struct rsp_desc *r)
+{
+ struct sge_rspq *q = &qs->rspq;
+ unsigned int sleeping = 0;
+
+ do {
+ u32 flags = ntohl(r->flags);
+
+ r++;
+ if (unlikely(++q->cidx == q->size)) {
+ q->cidx = 0;
+ q->gen ^= 1;
+ r = q->desc;
+ }
+ prefetch(r);
+
+ if (flags & RSPD_CTRL_MASK) {
+ sleeping |= flags & RSPD_GTS_MASK;
+ handle_rsp_cntrl_info(qs, flags);
+ }
+
+ q->pure_rsps++;
+ if (++q->credits >= (q->size / 4)) {
+ refill_rspq(adap, q, q->credits);
+ q->credits = 0;
+ }
+ } while (is_new_response(r, q) && is_pure_response(r));
+
+ if (sleeping)
+ check_ring_db(adap, qs, sleeping);
+
+ smp_mb(); /* commit Tx queue .processed updates */
+ if (unlikely(qs->txq_stopped != 0))
+ restart_tx(qs);
+
+ return is_new_response(r, q);
+}
+
+/**
+ * handle_responses - decide what to do with new responses in NAPI mode
+ * @adap: the adapter
+ * @q: the response queue
+ *
+ * This is used by the NAPI interrupt handlers to decide what to do with
+ * new SGE responses. If there are no new responses it returns -1. If
+ * there are new responses and they are pure (i.e., non-data carrying)
+ * it handles them straight in hard interrupt context as they are very
+ * cheap and don't deliver any packets. Finally, if there are any data
+ * signaling responses it schedules the NAPI handler. Returns 1 if it
+ * schedules NAPI, 0 if all new responses were pure.
+ *
+ * The caller must ascertain NAPI is not already running.
+ */
+static inline int handle_responses(struct adapter *adap, struct sge_rspq *q)
+{
+ struct sge_qset *qs = rspq_to_qset(q);
+ struct rsp_desc *r = &q->desc[q->cidx];
+
+ if (!is_new_response(r, q))
+ return -1;
+ if (is_pure_response(r) && process_pure_responses(adap, qs, r) == 0) {
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
+ V_NEWTIMER(q->holdoff_tmr) | V_NEWINDEX(q->cidx));
+ return 0;
+ }
+ if (likely(__netif_rx_schedule_prep(qs->netdev)))
+ __netif_rx_schedule(qs->netdev);
+ return 1;
+}
+
+/*
+ * The MSI-X interrupt handler for an SGE response queue for the non-NAPI case
+ * (i.e., response queue serviced in hard interrupt).
+ */
+irqreturn_t t3_sge_intr_msix(int irq, void *cookie)
+{
+ struct sge_qset *qs = cookie;
+ struct adapter *adap = qs->netdev->priv;
+ struct sge_rspq *q = &qs->rspq;
+
+ spin_lock(&q->lock);
+ if (process_responses(adap, qs, -1) == 0)
+ q->unhandled_irqs++;
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
+ V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
+ spin_unlock(&q->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * The MSI-X interrupt handler for an SGE response queue for the NAPI case
+ * (i.e., response queue serviced by NAPI polling).
+ */
+irqreturn_t t3_sge_intr_msix_napi(int irq, void *cookie)
+{
+ struct sge_qset *qs = cookie;
+ struct adapter *adap = qs->netdev->priv;
+ struct sge_rspq *q = &qs->rspq;
+
+ spin_lock(&q->lock);
+ BUG_ON(napi_is_scheduled(qs->netdev));
+
+ if (handle_responses(adap, q) < 0)
+ q->unhandled_irqs++;
+ spin_unlock(&q->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * The non-NAPI MSI interrupt handler. This needs to handle data events from
+ * SGE response queues as well as error and other async events as they all use
+ * the same MSI vector. We use one SGE response queue per port in this mode
+ * and protect all response queues with queue 0's lock.
+ */
+static irqreturn_t t3_intr_msi(int irq, void *cookie)
+{
+ int new_packets = 0;
+ struct adapter *adap = cookie;
+ struct sge_rspq *q = &adap->sge.qs[0].rspq;
+
+ spin_lock(&q->lock);
+
+ if (process_responses(adap, &adap->sge.qs[0], -1)) {
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(q->cntxt_id) |
+ V_NEWTIMER(q->next_holdoff) | V_NEWINDEX(q->cidx));
+ new_packets = 1;
+ }
+
+ if (adap->params.nports == 2 &&
+ process_responses(adap, &adap->sge.qs[1], -1)) {
+ struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
+
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(q1->cntxt_id) |
+ V_NEWTIMER(q1->next_holdoff) |
+ V_NEWINDEX(q1->cidx));
+ new_packets = 1;
+ }
+
+ if (!new_packets && t3_slow_intr_handler(adap) == 0)
+ q->unhandled_irqs++;
+
+ spin_unlock(&q->lock);
+ return IRQ_HANDLED;
+}
+
+static int rspq_check_napi(struct net_device *dev, struct sge_rspq *q)
+{
+ if (!napi_is_scheduled(dev) && is_new_response(&q->desc[q->cidx], q)) {
+ if (likely(__netif_rx_schedule_prep(dev)))
+ __netif_rx_schedule(dev);
+ return 1;
+ }
+ return 0;
+}
+
+/*
+ * The MSI interrupt handler for the NAPI case (i.e., response queues serviced
+ * by NAPI polling). Handles data events from SGE response queues as well as
+ * error and other async events as they all use the same MSI vector. We use
+ * one SGE response queue per port in this mode and protect all response
+ * queues with queue 0's lock.
+ */
+irqreturn_t t3_intr_msi_napi(int irq, void *cookie)
+{
+ int new_packets;
+ struct adapter *adap = cookie;
+ struct sge_rspq *q = &adap->sge.qs[0].rspq;
+
+ spin_lock(&q->lock);
+
+ new_packets = rspq_check_napi(adap->sge.qs[0].netdev, q);
+ if (adap->params.nports == 2)
+ new_packets += rspq_check_napi(adap->sge.qs[1].netdev,
+ &adap->sge.qs[1].rspq);
+ if (!new_packets && t3_slow_intr_handler(adap) == 0)
+ q->unhandled_irqs++;
+
+ spin_unlock(&q->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * A helper function that processes responses and issues GTS.
+ */
+static inline int process_responses_gts(struct adapter *adap,
+ struct sge_rspq *rq)
+{
+ int work;
+
+ work = process_responses(adap, rspq_to_qset(rq), -1);
+ t3_write_reg(adap, A_SG_GTS, V_RSPQ(rq->cntxt_id) |
+ V_NEWTIMER(rq->next_holdoff) | V_NEWINDEX(rq->cidx));
+ return work;
+}
+
+/*
+ * The legacy INTx interrupt handler. This needs to handle data events from
+ * SGE response queues as well as error and other async events as they all use
+ * the same interrupt pin. We use one SGE response queue per port in this mode
+ * and protect all response queues with queue 0's lock.
+ */
+static irqreturn_t t3_intr(int irq, void *cookie)
+{
+ int work_done, w0, w1;
+ struct adapter *adap = cookie;
+ struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
+ struct sge_rspq *q1 = &adap->sge.qs[1].rspq;
+
+ spin_lock(&q0->lock);
+
+ w0 = is_new_response(&q0->desc[q0->cidx], q0);
+ w1 = adap->params.nports == 2 &&
+ is_new_response(&q1->desc[q1->cidx], q1);
+
+ if (likely(w0 | w1)) {
+ t3_write_reg(adap, A_PL_CLI, 0);
+ t3_read_reg(adap, A_PL_CLI); /* flush */
+
+ if (likely(w0))
+ process_responses_gts(adap, q0);
+
+ if (w1)
+ process_responses_gts(adap, q1);
+
+ work_done = w0 | w1;
+ } else
+ work_done = t3_slow_intr_handler(adap);
+
+ spin_unlock(&q0->lock);
+ return IRQ_RETVAL(work_done != 0);
+}
+
+/*
+ * Interrupt handler for legacy INTx interrupts for T3B-based cards.
+ * Handles data events from SGE response queues as well as error and other
+ * async events as they all use the same interrupt pin. We use one SGE
+ * response queue per port in this mode and protect all response queues with
+ * queue 0's lock.
+ */
+static irqreturn_t t3b_intr(int irq, void *cookie)
+{
+ u32 map;
+ struct adapter *adap = cookie;
+ struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
+
+ t3_write_reg(adap, A_PL_CLI, 0);
+ map = t3_read_reg(adap, A_SG_DATA_INTR);
+
+ if (unlikely(!map)) /* shared interrupt, most likely */
+ return IRQ_NONE;
+
+ spin_lock(&q0->lock);
+
+ if (unlikely(map & F_ERRINTR))
+ t3_slow_intr_handler(adap);
+
+ if (likely(map & 1))
+ process_responses_gts(adap, q0);
+
+ if (map & 2)
+ process_responses_gts(adap, &adap->sge.qs[1].rspq);
+
+ spin_unlock(&q0->lock);
+ return IRQ_HANDLED;
+}
+
+/*
+ * NAPI interrupt handler for legacy INTx interrupts for T3B-based cards.
+ * Handles data events from SGE response queues as well as error and other
+ * async events as they all use the same interrupt pin. We use one SGE
+ * response queue per port in this mode and protect all response queues with
+ * queue 0's lock.
+ */
+static irqreturn_t t3b_intr_napi(int irq, void *cookie)
+{
+ u32 map;
+ struct net_device *dev;
+ struct adapter *adap = cookie;
+ struct sge_rspq *q0 = &adap->sge.qs[0].rspq;
+
+ t3_write_reg(adap, A_PL_CLI, 0);
+ map = t3_read_reg(adap, A_SG_DATA_INTR);
+
+ if (unlikely(!map)) /* shared interrupt, most likely */
+ return IRQ_NONE;
+
+ spin_lock(&q0->lock);
+
+ if (unlikely(map & F_ERRINTR))
+ t3_slow_intr_handler(adap);
+
+ if (likely(map & 1)) {
+ dev = adap->sge.qs[0].netdev;
+
+ if (likely(__netif_rx_schedule_prep(dev)))
+ __netif_rx_schedule(dev);
+ }
+ if (map & 2) {
+ dev = adap->sge.qs[1].netdev;
+
+ if (likely(__netif_rx_schedule_prep(dev)))
+ __netif_rx_schedule(dev);
+ }
+
+ spin_unlock(&q0->lock);
+ return IRQ_HANDLED;
+}
+
+/**
+ * t3_intr_handler - select the top-level interrupt handler
+ * @adap: the adapter
+ * @polling: whether using NAPI to service response queues
+ *
+ * Selects the top-level interrupt handler based on the type of interrupts
+ * (MSI-X, MSI, or legacy) and whether NAPI will be used to service the
+ * response queues.
+ */
+intr_handler_t t3_intr_handler(struct adapter *adap, int polling)
+{
+ if (adap->flags & USING_MSIX)
+ return polling ? t3_sge_intr_msix_napi : t3_sge_intr_msix;
+ if (adap->flags & USING_MSI)
+ return polling ? t3_intr_msi_napi : t3_intr_msi;
+ if (adap->params.rev > 0)
+ return polling ? t3b_intr_napi : t3b_intr;
+ return t3_intr;
+}
+
+/**
+ * t3_sge_err_intr_handler - SGE async event interrupt handler
+ * @adapter: the adapter
+ *
+ * Interrupt handler for SGE asynchronous (non-data) events.
+ */
+void t3_sge_err_intr_handler(struct adapter *adapter)
+{
+ unsigned int v, status = t3_read_reg(adapter, A_SG_INT_CAUSE);
+
+ if (status & F_RSPQCREDITOVERFOW)
+ CH_ALERT(adapter, "SGE response queue credit overflow\n");
+
+ if (status & F_RSPQDISABLED) {
+ v = t3_read_reg(adapter, A_SG_RSPQ_FL_STATUS);
+
+ CH_ALERT(adapter,
+ "packet delivered to disabled response queue "
+ "(0x%x)\n", (v >> S_RSPQ0DISABLED) & 0xff);
+ }
+
+ t3_write_reg(adapter, A_SG_INT_CAUSE, status);
+ if (status & (F_RSPQCREDITOVERFOW | F_RSPQDISABLED))
+ t3_fatal_err(adapter);
+}
+
+/**
+ * sge_timer_cb - perform periodic maintenance of an SGE qset
+ * @data: the SGE queue set to maintain
+ *
+ * Runs periodically from a timer to perform maintenance of an SGE queue
+ * set. It performs two tasks:
+ *
+ * a) Cleans up any completed Tx descriptors that may still be pending.
+ * Normal descriptor cleanup happens when new packets are added to a Tx
+ * queue so this timer is relatively infrequent and does any cleanup only
+ * if the Tx queue has not seen any new packets in a while. We make a
+ * best effort attempt to reclaim descriptors, in that we don't wait
+ * around if we cannot get a queue's lock (which most likely is because
+ * someone else is queueing new packets and so will also handle the clean
+ * up). Since control queues use immediate data exclusively we don't
+ * bother cleaning them up here.
+ *
+ * b) Replenishes Rx queues that have run out due to memory shortage.
+ * Normally new Rx buffers are added when existing ones are consumed but
+ * when out of memory a queue can become empty. We try to add only a few
+ * buffers here, the queue will be replenished fully as these new buffers
+ * are used up if memory shortage has subsided.
+ */
+static void sge_timer_cb(unsigned long data)
+{
+ spinlock_t *lock;
+ struct sge_qset *qs = (struct sge_qset *)data;
+ struct adapter *adap = qs->netdev->priv;
+
+ if (spin_trylock(&qs->txq[TXQ_ETH].lock)) {
+ reclaim_completed_tx(adap, &qs->txq[TXQ_ETH]);
+ spin_unlock(&qs->txq[TXQ_ETH].lock);
+ }
+ if (spin_trylock(&qs->txq[TXQ_OFLD].lock)) {
+ reclaim_completed_tx(adap, &qs->txq[TXQ_OFLD]);
+ spin_unlock(&qs->txq[TXQ_OFLD].lock);
+ }
+ lock = (adap->flags & USING_MSIX) ? &qs->rspq.lock :
+ &adap->sge.qs[0].rspq.lock;
+ if (spin_trylock_irq(lock)) {
+ if (!napi_is_scheduled(qs->netdev)) {
+ if (qs->fl[0].credits < qs->fl[0].size)
+ __refill_fl(adap, &qs->fl[0]);
+ if (qs->fl[1].credits < qs->fl[1].size)
+ __refill_fl(adap, &qs->fl[1]);
+ }
+ spin_unlock_irq(lock);
+ }
+ mod_timer(&qs->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+}
+
+/**
+ * t3_update_qset_coalesce - update coalescing settings for a queue set
+ * @qs: the SGE queue set
+ * @p: new queue set parameters
+ *
+ * Update the coalescing settings for an SGE queue set. Nothing is done
+ * if the queue set is not initialized yet.
+ */
+void t3_update_qset_coalesce(struct sge_qset *qs, const struct qset_params *p)
+{
+ if (!qs->netdev)
+ return;
+
+ qs->rspq.holdoff_tmr = max(p->coalesce_usecs * 10, 1U);/* can't be 0 */
+ qs->rspq.polling = p->polling;
+ qs->netdev->poll = p->polling ? napi_rx_handler : ofld_poll;
+}
+
+/**
+ * t3_sge_alloc_qset - initialize an SGE queue set
+ * @adapter: the adapter
+ * @id: the queue set id
+ * @nports: how many Ethernet ports will be using this queue set
+ * @irq_vec_idx: the IRQ vector index for response queue interrupts
+ * @p: configuration parameters for this queue set
+ * @ntxq: number of Tx queues for the queue set
+ * @netdev: net device associated with this queue set
+ *
+ * Allocate resources and initialize an SGE queue set. A queue set
+ * comprises a response queue, two Rx free-buffer queues, and up to 3
+ * Tx queues. The Tx queues are assigned roles in the order Ethernet
+ * queue, offload queue, and control queue.
+ */
+int t3_sge_alloc_qset(struct adapter *adapter, unsigned int id, int nports,
+ int irq_vec_idx, const struct qset_params *p,
+ int ntxq, struct net_device *netdev)
+{
+ int i, ret = -ENOMEM;
+ struct sge_qset *q = &adapter->sge.qs[id];
+
+ init_qset_cntxt(q, id);
+ init_timer(&q->tx_reclaim_timer);
+ q->tx_reclaim_timer.data = (unsigned long)q;
+ q->tx_reclaim_timer.function = sge_timer_cb;
+
+ q->fl[0].desc = alloc_ring(adapter->pdev, p->fl_size,
+ sizeof(struct rx_desc),
+ sizeof(struct rx_sw_desc),
+ &q->fl[0].phys_addr, &q->fl[0].sdesc);
+ if (!q->fl[0].desc)
+ goto err;
+
+ q->fl[1].desc = alloc_ring(adapter->pdev, p->jumbo_size,
+ sizeof(struct rx_desc),
+ sizeof(struct rx_sw_desc),
+ &q->fl[1].phys_addr, &q->fl[1].sdesc);
+ if (!q->fl[1].desc)
+ goto err;
+
+ q->rspq.desc = alloc_ring(adapter->pdev, p->rspq_size,
+ sizeof(struct rsp_desc), 0,
+ &q->rspq.phys_addr, NULL);
+ if (!q->rspq.desc)
+ goto err;
+
+ for (i = 0; i < ntxq; ++i) {
+ /*
+ * The control queue always uses immediate data so does not
+ * need to keep track of any sk_buffs.
+ */
+ size_t sz = i == TXQ_CTRL ? 0 : sizeof(struct tx_sw_desc);
+
+ q->txq[i].desc = alloc_ring(adapter->pdev, p->txq_size[i],
+ sizeof(struct tx_desc), sz,
+ &q->txq[i].phys_addr,
+ &q->txq[i].sdesc);
+ if (!q->txq[i].desc)
+ goto err;
+
+ q->txq[i].gen = 1;
+ q->txq[i].size = p->txq_size[i];
+ spin_lock_init(&q->txq[i].lock);
+ skb_queue_head_init(&q->txq[i].sendq);
+ }
+
+ tasklet_init(&q->txq[TXQ_OFLD].qresume_tsk, restart_offloadq,
+ (unsigned long)q);
+ tasklet_init(&q->txq[TXQ_CTRL].qresume_tsk, restart_ctrlq,
+ (unsigned long)q);
+
+ q->fl[0].gen = q->fl[1].gen = 1;
+ q->fl[0].size = p->fl_size;
+ q->fl[1].size = p->jumbo_size;
+
+ q->rspq.gen = 1;
+ q->rspq.size = p->rspq_size;
+ spin_lock_init(&q->rspq.lock);
+
+ q->txq[TXQ_ETH].stop_thres = nports *
+ flits_to_desc(sgl_len(MAX_SKB_FRAGS + 1) + 3);
+
+ if (ntxq == 1) {
+ q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE + 2 +
+ sizeof(struct cpl_rx_pkt);
+ q->fl[1].buf_size = MAX_FRAME_SIZE + 2 +
+ sizeof(struct cpl_rx_pkt);
+ } else {
+ q->fl[0].buf_size = SGE_RX_SM_BUF_SIZE +
+ sizeof(struct cpl_rx_data);
+ q->fl[1].buf_size = (16 * 1024) -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+ }
+
+ spin_lock(&adapter->sge.reg_lock);
+
+ /* FL threshold comparison uses < */
+ ret = t3_sge_init_rspcntxt(adapter, q->rspq.cntxt_id, irq_vec_idx,
+ q->rspq.phys_addr, q->rspq.size,
+ q->fl[0].buf_size, 1, 0);
+ if (ret)
+ goto err_unlock;
+
+ for (i = 0; i < SGE_RXQ_PER_SET; ++i) {
+ ret = t3_sge_init_flcntxt(adapter, q->fl[i].cntxt_id, 0,
+ q->fl[i].phys_addr, q->fl[i].size,
+ q->fl[i].buf_size, p->cong_thres, 1,
+ 0);
+ if (ret)
+ goto err_unlock;
+ }
+
+ ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_ETH].cntxt_id, USE_GTS,
+ SGE_CNTXT_ETH, id, q->txq[TXQ_ETH].phys_addr,
+ q->txq[TXQ_ETH].size, q->txq[TXQ_ETH].token,
+ 1, 0);
+ if (ret)
+ goto err_unlock;
+
+ if (ntxq > 1) {
+ ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_OFLD].cntxt_id,
+ USE_GTS, SGE_CNTXT_OFLD, id,
+ q->txq[TXQ_OFLD].phys_addr,
+ q->txq[TXQ_OFLD].size, 0, 1, 0);
+ if (ret)
+ goto err_unlock;
+ }
+
+ if (ntxq > 2) {
+ ret = t3_sge_init_ecntxt(adapter, q->txq[TXQ_CTRL].cntxt_id, 0,
+ SGE_CNTXT_CTRL, id,
+ q->txq[TXQ_CTRL].phys_addr,
+ q->txq[TXQ_CTRL].size,
+ q->txq[TXQ_CTRL].token, 1, 0);
+ if (ret)
+ goto err_unlock;
+ }
+
+ spin_unlock(&adapter->sge.reg_lock);
+ q->netdev = netdev;
+ t3_update_qset_coalesce(q, p);
+
+ /*
+ * We use atalk_ptr as a backpointer to a qset. In case a device is
+ * associated with multiple queue sets only the first one sets
+ * atalk_ptr.
+ */
+ if (netdev->atalk_ptr == NULL)
+ netdev->atalk_ptr = q;
+
+ refill_fl(adapter, &q->fl[0], q->fl[0].size, GFP_KERNEL);
+ refill_fl(adapter, &q->fl[1], q->fl[1].size, GFP_KERNEL);
+ refill_rspq(adapter, &q->rspq, q->rspq.size - 1);
+
+ t3_write_reg(adapter, A_SG_GTS, V_RSPQ(q->rspq.cntxt_id) |
+ V_NEWTIMER(q->rspq.holdoff_tmr));
+
+ mod_timer(&q->tx_reclaim_timer, jiffies + TX_RECLAIM_PERIOD);
+ return 0;
+
+ err_unlock:
+ spin_unlock(&adapter->sge.reg_lock);
+ err:
+ t3_free_qset(adapter, q);
+ return ret;
+}
+
+/**
+ * t3_free_sge_resources - free SGE resources
+ * @adap: the adapter
+ *
+ * Frees resources used by the SGE queue sets.
+ */
+void t3_free_sge_resources(struct adapter *adap)
+{
+ int i;
+
+ for (i = 0; i < SGE_QSETS; ++i)
+ t3_free_qset(adap, &adap->sge.qs[i]);
+}
+
+/**
+ * t3_sge_start - enable SGE
+ * @adap: the adapter
+ *
+ * Enables the SGE for DMAs. This is the last step in starting packet
+ * transfers.
+ */
+void t3_sge_start(struct adapter *adap)
+{
+ t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, F_GLOBALENABLE);
+}
+
+/**
+ * t3_sge_stop - disable SGE operation
+ * @adap: the adapter
+ *
+ * Disables the DMA engine. This can be called in emeregencies (e.g.,
+ * from error interrupts) or from normal process context. In the latter
+ * case it also disables any pending queue restart tasklets. Note that
+ * if it is called in interrupt context it cannot disable the restart
+ * tasklets as it cannot wait, however the tasklets will have no effect
+ * since the doorbells are disabled and the driver will call this again
+ * later from process context, at which time the tasklets will be stopped
+ * if they are still running.
+ */
+void t3_sge_stop(struct adapter *adap)
+{
+ t3_set_reg_field(adap, A_SG_CONTROL, F_GLOBALENABLE, 0);
+ if (!in_interrupt()) {
+ int i;
+
+ for (i = 0; i < SGE_QSETS; ++i) {
+ struct sge_qset *qs = &adap->sge.qs[i];
+
+ tasklet_kill(&qs->txq[TXQ_OFLD].qresume_tsk);
+ tasklet_kill(&qs->txq[TXQ_CTRL].qresume_tsk);
+ }
+ }
+}
+
+/**
+ * t3_sge_init - initialize SGE
+ * @adap: the adapter
+ * @p: the SGE parameters
+ *
+ * Performs SGE initialization needed every time after a chip reset.
+ * We do not initialize any of the queue sets here, instead the driver
+ * top-level must request those individually. We also do not enable DMA
+ * here, that should be done after the queues have been set up.
+ */
+void t3_sge_init(struct adapter *adap, struct sge_params *p)
+{
+ unsigned int ctrl, ups = ffs(pci_resource_len(adap->pdev, 2) >> 12);
+
+ ctrl = F_DROPPKT | V_PKTSHIFT(2) | F_FLMODE | F_AVOIDCQOVFL |
+ F_CQCRDTCTRL |
+ V_HOSTPAGESIZE(PAGE_SHIFT - 11) | F_BIGENDIANINGRESS |
+ V_USERSPACESIZE(ups ? ups - 1 : 0) | F_ISCSICOALESCING;
+#if SGE_NUM_GENBITS == 1
+ ctrl |= F_EGRGENCTRL;
+#endif
+ if (adap->params.rev > 0) {
+ if (!(adap->flags & (USING_MSIX | USING_MSI)))
+ ctrl |= F_ONEINTMULTQ | F_OPTONEINTMULTQ;
+ ctrl |= F_CQCRDTCTRL | F_AVOIDCQOVFL;
+ }
+ t3_write_reg(adap, A_SG_CONTROL, ctrl);
+ t3_write_reg(adap, A_SG_EGR_RCQ_DRB_THRSH, V_HIRCQDRBTHRSH(512) |
+ V_LORCQDRBTHRSH(512));
+ t3_write_reg(adap, A_SG_TIMER_TICK, core_ticks_per_usec(adap) / 10);
+ t3_write_reg(adap, A_SG_CMDQ_CREDIT_TH, V_THRESHOLD(32) |
+ V_TIMEOUT(200 * core_ticks_per_usec(adap)));
+ t3_write_reg(adap, A_SG_HI_DRB_HI_THRSH, 1000);
+ t3_write_reg(adap, A_SG_HI_DRB_LO_THRSH, 256);
+ t3_write_reg(adap, A_SG_LO_DRB_HI_THRSH, 1000);
+ t3_write_reg(adap, A_SG_LO_DRB_LO_THRSH, 256);
+ t3_write_reg(adap, A_SG_OCO_BASE, V_BASE1(0xfff));
+ t3_write_reg(adap, A_SG_DRB_PRI_THRESH, 63 * 1024);
+}
+
+/**
+ * t3_sge_prep - one-time SGE initialization
+ * @adap: the associated adapter
+ * @p: SGE parameters
+ *
+ * Performs one-time initialization of SGE SW state. Includes determining
+ * defaults for the assorted SGE parameters, which admins can change until
+ * they are used to initialize the SGE.
+ */
+void __devinit t3_sge_prep(struct adapter *adap, struct sge_params *p)
+{
+ int i;
+
+ p->max_pkt_size = (16 * 1024) - sizeof(struct cpl_rx_data) -
+ SKB_DATA_ALIGN(sizeof(struct skb_shared_info));
+
+ for (i = 0; i < SGE_QSETS; ++i) {
+ struct qset_params *q = p->qset + i;
+
+ q->polling = adap->params.rev > 0;
+ q->coalesce_usecs = 5;
+ q->rspq_size = 1024;
+ q->fl_size = 4096;
+ q->jumbo_size = 512;
+ q->txq_size[TXQ_ETH] = 1024;
+ q->txq_size[TXQ_OFLD] = 1024;
+ q->txq_size[TXQ_CTRL] = 256;
+ q->cong_thres = 0;
+ }
+
+ spin_lock_init(&adap->sge.reg_lock);
+}
+
+/**
+ * t3_get_desc - dump an SGE descriptor for debugging purposes
+ * @qs: the queue set
+ * @qnum: identifies the specific queue (0..2: Tx, 3:response, 4..5: Rx)
+ * @idx: the descriptor index in the queue
+ * @data: where to dump the descriptor contents
+ *
+ * Dumps the contents of a HW descriptor of an SGE queue. Returns the
+ * size of the descriptor.
+ */
+int t3_get_desc(const struct sge_qset *qs, unsigned int qnum, unsigned int idx,
+ unsigned char *data)
+{
+ if (qnum >= 6)
+ return -EINVAL;
+
+ if (qnum < 3) {
+ if (!qs->txq[qnum].desc || idx >= qs->txq[qnum].size)
+ return -EINVAL;
+ memcpy(data, &qs->txq[qnum].desc[idx], sizeof(struct tx_desc));
+ return sizeof(struct tx_desc);
+ }
+
+ if (qnum == 3) {
+ if (!qs->rspq.desc || idx >= qs->rspq.size)
+ return -EINVAL;
+ memcpy(data, &qs->rspq.desc[idx], sizeof(struct rsp_desc));
+ return sizeof(struct rsp_desc);
+ }
+
+ qnum -= 4;
+ if (!qs->fl[qnum].desc || idx >= qs->fl[qnum].size)
+ return -EINVAL;
+ memcpy(data, &qs->fl[qnum].desc[idx], sizeof(struct rx_desc));
+ return sizeof(struct rx_desc);
+}
--- /dev/null
+/*
+ * This file is automatically generated --- any changes will be lost.
+ */
+
+#ifndef _SGE_DEFS_H
+#define _SGE_DEFS_H
+
+#define S_EC_CREDITS 0
+#define M_EC_CREDITS 0x7FFF
+#define V_EC_CREDITS(x) ((x) << S_EC_CREDITS)
+#define G_EC_CREDITS(x) (((x) >> S_EC_CREDITS) & M_EC_CREDITS)
+
+#define S_EC_GTS 15
+#define V_EC_GTS(x) ((x) << S_EC_GTS)
+#define F_EC_GTS V_EC_GTS(1U)
+
+#define S_EC_INDEX 16
+#define M_EC_INDEX 0xFFFF
+#define V_EC_INDEX(x) ((x) << S_EC_INDEX)
+#define G_EC_INDEX(x) (((x) >> S_EC_INDEX) & M_EC_INDEX)
+
+#define S_EC_SIZE 0
+#define M_EC_SIZE 0xFFFF
+#define V_EC_SIZE(x) ((x) << S_EC_SIZE)
+#define G_EC_SIZE(x) (((x) >> S_EC_SIZE) & M_EC_SIZE)
+
+#define S_EC_BASE_LO 16
+#define M_EC_BASE_LO 0xFFFF
+#define V_EC_BASE_LO(x) ((x) << S_EC_BASE_LO)
+#define G_EC_BASE_LO(x) (((x) >> S_EC_BASE_LO) & M_EC_BASE_LO)
+
+#define S_EC_BASE_HI 0
+#define M_EC_BASE_HI 0xF
+#define V_EC_BASE_HI(x) ((x) << S_EC_BASE_HI)
+#define G_EC_BASE_HI(x) (((x) >> S_EC_BASE_HI) & M_EC_BASE_HI)
+
+#define S_EC_RESPQ 4
+#define M_EC_RESPQ 0x7
+#define V_EC_RESPQ(x) ((x) << S_EC_RESPQ)
+#define G_EC_RESPQ(x) (((x) >> S_EC_RESPQ) & M_EC_RESPQ)
+
+#define S_EC_TYPE 7
+#define M_EC_TYPE 0x7
+#define V_EC_TYPE(x) ((x) << S_EC_TYPE)
+#define G_EC_TYPE(x) (((x) >> S_EC_TYPE) & M_EC_TYPE)
+
+#define S_EC_GEN 10
+#define V_EC_GEN(x) ((x) << S_EC_GEN)
+#define F_EC_GEN V_EC_GEN(1U)
+
+#define S_EC_UP_TOKEN 11
+#define M_EC_UP_TOKEN 0xFFFFF
+#define V_EC_UP_TOKEN(x) ((x) << S_EC_UP_TOKEN)
+#define G_EC_UP_TOKEN(x) (((x) >> S_EC_UP_TOKEN) & M_EC_UP_TOKEN)
+
+#define S_EC_VALID 31
+#define V_EC_VALID(x) ((x) << S_EC_VALID)
+#define F_EC_VALID V_EC_VALID(1U)
+
+#define S_RQ_MSI_VEC 20
+#define M_RQ_MSI_VEC 0x3F
+#define V_RQ_MSI_VEC(x) ((x) << S_RQ_MSI_VEC)
+#define G_RQ_MSI_VEC(x) (((x) >> S_RQ_MSI_VEC) & M_RQ_MSI_VEC)
+
+#define S_RQ_INTR_EN 26
+#define V_RQ_INTR_EN(x) ((x) << S_RQ_INTR_EN)
+#define F_RQ_INTR_EN V_RQ_INTR_EN(1U)
+
+#define S_RQ_GEN 28
+#define V_RQ_GEN(x) ((x) << S_RQ_GEN)
+#define F_RQ_GEN V_RQ_GEN(1U)
+
+#define S_CQ_INDEX 0
+#define M_CQ_INDEX 0xFFFF
+#define V_CQ_INDEX(x) ((x) << S_CQ_INDEX)
+#define G_CQ_INDEX(x) (((x) >> S_CQ_INDEX) & M_CQ_INDEX)
+
+#define S_CQ_SIZE 16
+#define M_CQ_SIZE 0xFFFF
+#define V_CQ_SIZE(x) ((x) << S_CQ_SIZE)
+#define G_CQ_SIZE(x) (((x) >> S_CQ_SIZE) & M_CQ_SIZE)
+
+#define S_CQ_BASE_HI 0
+#define M_CQ_BASE_HI 0xFFFFF
+#define V_CQ_BASE_HI(x) ((x) << S_CQ_BASE_HI)
+#define G_CQ_BASE_HI(x) (((x) >> S_CQ_BASE_HI) & M_CQ_BASE_HI)
+
+#define S_CQ_RSPQ 20
+#define M_CQ_RSPQ 0x3F
+#define V_CQ_RSPQ(x) ((x) << S_CQ_RSPQ)
+#define G_CQ_RSPQ(x) (((x) >> S_CQ_RSPQ) & M_CQ_RSPQ)
+
+#define S_CQ_ASYNC_NOTIF 26
+#define V_CQ_ASYNC_NOTIF(x) ((x) << S_CQ_ASYNC_NOTIF)
+#define F_CQ_ASYNC_NOTIF V_CQ_ASYNC_NOTIF(1U)
+
+#define S_CQ_ARMED 27
+#define V_CQ_ARMED(x) ((x) << S_CQ_ARMED)
+#define F_CQ_ARMED V_CQ_ARMED(1U)
+
+#define S_CQ_ASYNC_NOTIF_SOL 28
+#define V_CQ_ASYNC_NOTIF_SOL(x) ((x) << S_CQ_ASYNC_NOTIF_SOL)
+#define F_CQ_ASYNC_NOTIF_SOL V_CQ_ASYNC_NOTIF_SOL(1U)
+
+#define S_CQ_GEN 29
+#define V_CQ_GEN(x) ((x) << S_CQ_GEN)
+#define F_CQ_GEN V_CQ_GEN(1U)
+
+#define S_CQ_OVERFLOW_MODE 31
+#define V_CQ_OVERFLOW_MODE(x) ((x) << S_CQ_OVERFLOW_MODE)
+#define F_CQ_OVERFLOW_MODE V_CQ_OVERFLOW_MODE(1U)
+
+#define S_CQ_CREDITS 0
+#define M_CQ_CREDITS 0xFFFF
+#define V_CQ_CREDITS(x) ((x) << S_CQ_CREDITS)
+#define G_CQ_CREDITS(x) (((x) >> S_CQ_CREDITS) & M_CQ_CREDITS)
+
+#define S_CQ_CREDIT_THRES 16
+#define M_CQ_CREDIT_THRES 0x1FFF
+#define V_CQ_CREDIT_THRES(x) ((x) << S_CQ_CREDIT_THRES)
+#define G_CQ_CREDIT_THRES(x) (((x) >> S_CQ_CREDIT_THRES) & M_CQ_CREDIT_THRES)
+
+#define S_FL_BASE_HI 0
+#define M_FL_BASE_HI 0xFFFFF
+#define V_FL_BASE_HI(x) ((x) << S_FL_BASE_HI)
+#define G_FL_BASE_HI(x) (((x) >> S_FL_BASE_HI) & M_FL_BASE_HI)
+
+#define S_FL_INDEX_LO 20
+#define M_FL_INDEX_LO 0xFFF
+#define V_FL_INDEX_LO(x) ((x) << S_FL_INDEX_LO)
+#define G_FL_INDEX_LO(x) (((x) >> S_FL_INDEX_LO) & M_FL_INDEX_LO)
+
+#define S_FL_INDEX_HI 0
+#define M_FL_INDEX_HI 0xF
+#define V_FL_INDEX_HI(x) ((x) << S_FL_INDEX_HI)
+#define G_FL_INDEX_HI(x) (((x) >> S_FL_INDEX_HI) & M_FL_INDEX_HI)
+
+#define S_FL_SIZE 4
+#define M_FL_SIZE 0xFFFF
+#define V_FL_SIZE(x) ((x) << S_FL_SIZE)
+#define G_FL_SIZE(x) (((x) >> S_FL_SIZE) & M_FL_SIZE)
+
+#define S_FL_GEN 20
+#define V_FL_GEN(x) ((x) << S_FL_GEN)
+#define F_FL_GEN V_FL_GEN(1U)
+
+#define S_FL_ENTRY_SIZE_LO 21
+#define M_FL_ENTRY_SIZE_LO 0x7FF
+#define V_FL_ENTRY_SIZE_LO(x) ((x) << S_FL_ENTRY_SIZE_LO)
+#define G_FL_ENTRY_SIZE_LO(x) (((x) >> S_FL_ENTRY_SIZE_LO) & M_FL_ENTRY_SIZE_LO)
+
+#define S_FL_ENTRY_SIZE_HI 0
+#define M_FL_ENTRY_SIZE_HI 0x1FFFFF
+#define V_FL_ENTRY_SIZE_HI(x) ((x) << S_FL_ENTRY_SIZE_HI)
+#define G_FL_ENTRY_SIZE_HI(x) (((x) >> S_FL_ENTRY_SIZE_HI) & M_FL_ENTRY_SIZE_HI)
+
+#define S_FL_CONG_THRES 21
+#define M_FL_CONG_THRES 0x3FF
+#define V_FL_CONG_THRES(x) ((x) << S_FL_CONG_THRES)
+#define G_FL_CONG_THRES(x) (((x) >> S_FL_CONG_THRES) & M_FL_CONG_THRES)
+
+#define S_FL_GTS 31
+#define V_FL_GTS(x) ((x) << S_FL_GTS)
+#define F_FL_GTS V_FL_GTS(1U)
+
+#define S_FLD_GEN1 31
+#define V_FLD_GEN1(x) ((x) << S_FLD_GEN1)
+#define F_FLD_GEN1 V_FLD_GEN1(1U)
+
+#define S_FLD_GEN2 0
+#define V_FLD_GEN2(x) ((x) << S_FLD_GEN2)
+#define F_FLD_GEN2 V_FLD_GEN2(1U)
+
+#define S_RSPD_TXQ1_CR 0
+#define M_RSPD_TXQ1_CR 0x7F
+#define V_RSPD_TXQ1_CR(x) ((x) << S_RSPD_TXQ1_CR)
+#define G_RSPD_TXQ1_CR(x) (((x) >> S_RSPD_TXQ1_CR) & M_RSPD_TXQ1_CR)
+
+#define S_RSPD_TXQ1_GTS 7
+#define V_RSPD_TXQ1_GTS(x) ((x) << S_RSPD_TXQ1_GTS)
+#define F_RSPD_TXQ1_GTS V_RSPD_TXQ1_GTS(1U)
+
+#define S_RSPD_TXQ2_CR 8
+#define M_RSPD_TXQ2_CR 0x7F
+#define V_RSPD_TXQ2_CR(x) ((x) << S_RSPD_TXQ2_CR)
+#define G_RSPD_TXQ2_CR(x) (((x) >> S_RSPD_TXQ2_CR) & M_RSPD_TXQ2_CR)
+
+#define S_RSPD_TXQ2_GTS 15
+#define V_RSPD_TXQ2_GTS(x) ((x) << S_RSPD_TXQ2_GTS)
+#define F_RSPD_TXQ2_GTS V_RSPD_TXQ2_GTS(1U)
+
+#define S_RSPD_TXQ0_CR 16
+#define M_RSPD_TXQ0_CR 0x7F
+#define V_RSPD_TXQ0_CR(x) ((x) << S_RSPD_TXQ0_CR)
+#define G_RSPD_TXQ0_CR(x) (((x) >> S_RSPD_TXQ0_CR) & M_RSPD_TXQ0_CR)
+
+#define S_RSPD_TXQ0_GTS 23
+#define V_RSPD_TXQ0_GTS(x) ((x) << S_RSPD_TXQ0_GTS)
+#define F_RSPD_TXQ0_GTS V_RSPD_TXQ0_GTS(1U)
+
+#define S_RSPD_EOP 24
+#define V_RSPD_EOP(x) ((x) << S_RSPD_EOP)
+#define F_RSPD_EOP V_RSPD_EOP(1U)
+
+#define S_RSPD_SOP 25
+#define V_RSPD_SOP(x) ((x) << S_RSPD_SOP)
+#define F_RSPD_SOP V_RSPD_SOP(1U)
+
+#define S_RSPD_ASYNC_NOTIF 26
+#define V_RSPD_ASYNC_NOTIF(x) ((x) << S_RSPD_ASYNC_NOTIF)
+#define F_RSPD_ASYNC_NOTIF V_RSPD_ASYNC_NOTIF(1U)
+
+#define S_RSPD_FL0_GTS 27
+#define V_RSPD_FL0_GTS(x) ((x) << S_RSPD_FL0_GTS)
+#define F_RSPD_FL0_GTS V_RSPD_FL0_GTS(1U)
+
+#define S_RSPD_FL1_GTS 28
+#define V_RSPD_FL1_GTS(x) ((x) << S_RSPD_FL1_GTS)
+#define F_RSPD_FL1_GTS V_RSPD_FL1_GTS(1U)
+
+#define S_RSPD_IMM_DATA_VALID 29
+#define V_RSPD_IMM_DATA_VALID(x) ((x) << S_RSPD_IMM_DATA_VALID)
+#define F_RSPD_IMM_DATA_VALID V_RSPD_IMM_DATA_VALID(1U)
+
+#define S_RSPD_OFFLOAD 30
+#define V_RSPD_OFFLOAD(x) ((x) << S_RSPD_OFFLOAD)
+#define F_RSPD_OFFLOAD V_RSPD_OFFLOAD(1U)
+
+#define S_RSPD_GEN1 31
+#define V_RSPD_GEN1(x) ((x) << S_RSPD_GEN1)
+#define F_RSPD_GEN1 V_RSPD_GEN1(1U)
+
+#define S_RSPD_LEN 0
+#define M_RSPD_LEN 0x7FFFFFFF
+#define V_RSPD_LEN(x) ((x) << S_RSPD_LEN)
+#define G_RSPD_LEN(x) (((x) >> S_RSPD_LEN) & M_RSPD_LEN)
+
+#define S_RSPD_FLQ 31
+#define V_RSPD_FLQ(x) ((x) << S_RSPD_FLQ)
+#define F_RSPD_FLQ V_RSPD_FLQ(1U)
+
+#define S_RSPD_GEN2 0
+#define V_RSPD_GEN2(x) ((x) << S_RSPD_GEN2)
+#define F_RSPD_GEN2 V_RSPD_GEN2(1U)
+
+#define S_RSPD_INR_VEC 1
+#define M_RSPD_INR_VEC 0x7F
+#define V_RSPD_INR_VEC(x) ((x) << S_RSPD_INR_VEC)
+#define G_RSPD_INR_VEC(x) (((x) >> S_RSPD_INR_VEC) & M_RSPD_INR_VEC)
+
+#endif /* _SGE_DEFS_H */
--- /dev/null
+/*
+ * Copyright (c) 2004-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef T3_CPL_H
+#define T3_CPL_H
+
+#if !defined(__LITTLE_ENDIAN_BITFIELD) && !defined(__BIG_ENDIAN_BITFIELD)
+# include <asm/byteorder.h>
+#endif
+
+enum CPL_opcode {
+ CPL_PASS_OPEN_REQ = 0x1,
+ CPL_PASS_ACCEPT_RPL = 0x2,
+ CPL_ACT_OPEN_REQ = 0x3,
+ CPL_SET_TCB = 0x4,
+ CPL_SET_TCB_FIELD = 0x5,
+ CPL_GET_TCB = 0x6,
+ CPL_PCMD = 0x7,
+ CPL_CLOSE_CON_REQ = 0x8,
+ CPL_CLOSE_LISTSRV_REQ = 0x9,
+ CPL_ABORT_REQ = 0xA,
+ CPL_ABORT_RPL = 0xB,
+ CPL_TX_DATA = 0xC,
+ CPL_RX_DATA_ACK = 0xD,
+ CPL_TX_PKT = 0xE,
+ CPL_RTE_DELETE_REQ = 0xF,
+ CPL_RTE_WRITE_REQ = 0x10,
+ CPL_RTE_READ_REQ = 0x11,
+ CPL_L2T_WRITE_REQ = 0x12,
+ CPL_L2T_READ_REQ = 0x13,
+ CPL_SMT_WRITE_REQ = 0x14,
+ CPL_SMT_READ_REQ = 0x15,
+ CPL_TX_PKT_LSO = 0x16,
+ CPL_PCMD_READ = 0x17,
+ CPL_BARRIER = 0x18,
+ CPL_TID_RELEASE = 0x1A,
+
+ CPL_CLOSE_LISTSRV_RPL = 0x20,
+ CPL_ERROR = 0x21,
+ CPL_GET_TCB_RPL = 0x22,
+ CPL_L2T_WRITE_RPL = 0x23,
+ CPL_PCMD_READ_RPL = 0x24,
+ CPL_PCMD_RPL = 0x25,
+ CPL_PEER_CLOSE = 0x26,
+ CPL_RTE_DELETE_RPL = 0x27,
+ CPL_RTE_WRITE_RPL = 0x28,
+ CPL_RX_DDP_COMPLETE = 0x29,
+ CPL_RX_PHYS_ADDR = 0x2A,
+ CPL_RX_PKT = 0x2B,
+ CPL_RX_URG_NOTIFY = 0x2C,
+ CPL_SET_TCB_RPL = 0x2D,
+ CPL_SMT_WRITE_RPL = 0x2E,
+ CPL_TX_DATA_ACK = 0x2F,
+
+ CPL_ABORT_REQ_RSS = 0x30,
+ CPL_ABORT_RPL_RSS = 0x31,
+ CPL_CLOSE_CON_RPL = 0x32,
+ CPL_ISCSI_HDR = 0x33,
+ CPL_L2T_READ_RPL = 0x34,
+ CPL_RDMA_CQE = 0x35,
+ CPL_RDMA_CQE_READ_RSP = 0x36,
+ CPL_RDMA_CQE_ERR = 0x37,
+ CPL_RTE_READ_RPL = 0x38,
+ CPL_RX_DATA = 0x39,
+
+ CPL_ACT_OPEN_RPL = 0x40,
+ CPL_PASS_OPEN_RPL = 0x41,
+ CPL_RX_DATA_DDP = 0x42,
+ CPL_SMT_READ_RPL = 0x43,
+
+ CPL_ACT_ESTABLISH = 0x50,
+ CPL_PASS_ESTABLISH = 0x51,
+
+ CPL_PASS_ACCEPT_REQ = 0x70,
+
+ CPL_ASYNC_NOTIF = 0x80, /* fake opcode for async notifications */
+
+ CPL_TX_DMA_ACK = 0xA0,
+ CPL_RDMA_READ_REQ = 0xA1,
+ CPL_RDMA_TERMINATE = 0xA2,
+ CPL_TRACE_PKT = 0xA3,
+ CPL_RDMA_EC_STATUS = 0xA5,
+
+ NUM_CPL_CMDS /* must be last and previous entries must be sorted */
+};
+
+enum CPL_error {
+ CPL_ERR_NONE = 0,
+ CPL_ERR_TCAM_PARITY = 1,
+ CPL_ERR_TCAM_FULL = 3,
+ CPL_ERR_CONN_RESET = 20,
+ CPL_ERR_CONN_EXIST = 22,
+ CPL_ERR_ARP_MISS = 23,
+ CPL_ERR_BAD_SYN = 24,
+ CPL_ERR_CONN_TIMEDOUT = 30,
+ CPL_ERR_XMIT_TIMEDOUT = 31,
+ CPL_ERR_PERSIST_TIMEDOUT = 32,
+ CPL_ERR_FINWAIT2_TIMEDOUT = 33,
+ CPL_ERR_KEEPALIVE_TIMEDOUT = 34,
+ CPL_ERR_RTX_NEG_ADVICE = 35,
+ CPL_ERR_PERSIST_NEG_ADVICE = 36,
+ CPL_ERR_ABORT_FAILED = 42,
+ CPL_ERR_GENERAL = 99
+};
+
+enum {
+ CPL_CONN_POLICY_AUTO = 0,
+ CPL_CONN_POLICY_ASK = 1,
+ CPL_CONN_POLICY_DENY = 3
+};
+
+enum {
+ ULP_MODE_NONE = 0,
+ ULP_MODE_ISCSI = 2,
+ ULP_MODE_RDMA = 4,
+ ULP_MODE_TCPDDP = 5
+};
+
+enum {
+ ULP_CRC_HEADER = 1 << 0,
+ ULP_CRC_DATA = 1 << 1
+};
+
+enum {
+ CPL_PASS_OPEN_ACCEPT,
+ CPL_PASS_OPEN_REJECT
+};
+
+enum {
+ CPL_ABORT_SEND_RST = 0,
+ CPL_ABORT_NO_RST,
+ CPL_ABORT_POST_CLOSE_REQ = 2
+};
+
+enum { /* TX_PKT_LSO ethernet types */
+ CPL_ETH_II,
+ CPL_ETH_II_VLAN,
+ CPL_ETH_802_3,
+ CPL_ETH_802_3_VLAN
+};
+
+enum { /* TCP congestion control algorithms */
+ CONG_ALG_RENO,
+ CONG_ALG_TAHOE,
+ CONG_ALG_NEWRENO,
+ CONG_ALG_HIGHSPEED
+};
+
+union opcode_tid {
+ __be32 opcode_tid;
+ __u8 opcode;
+};
+
+#define S_OPCODE 24
+#define V_OPCODE(x) ((x) << S_OPCODE)
+#define G_OPCODE(x) (((x) >> S_OPCODE) & 0xFF)
+#define G_TID(x) ((x) & 0xFFFFFF)
+
+/* tid is assumed to be 24-bits */
+#define MK_OPCODE_TID(opcode, tid) (V_OPCODE(opcode) | (tid))
+
+#define OPCODE_TID(cmd) ((cmd)->ot.opcode_tid)
+
+/* extract the TID from a CPL command */
+#define GET_TID(cmd) (G_TID(ntohl(OPCODE_TID(cmd))))
+
+struct tcp_options {
+ __be16 mss;
+ __u8 wsf;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8:5;
+ __u8 ecn:1;
+ __u8 sack:1;
+ __u8 tstamp:1;
+#else
+ __u8 tstamp:1;
+ __u8 sack:1;
+ __u8 ecn:1;
+ __u8:5;
+#endif
+};
+
+struct rss_header {
+ __u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 cpu_idx:6;
+ __u8 hash_type:2;
+#else
+ __u8 hash_type:2;
+ __u8 cpu_idx:6;
+#endif
+ __be16 cq_idx;
+ __be32 rss_hash_val;
+};
+
+#ifndef CHELSIO_FW
+struct work_request_hdr {
+ __be32 wr_hi;
+ __be32 wr_lo;
+};
+
+/* wr_hi fields */
+#define S_WR_SGE_CREDITS 0
+#define M_WR_SGE_CREDITS 0xFF
+#define V_WR_SGE_CREDITS(x) ((x) << S_WR_SGE_CREDITS)
+#define G_WR_SGE_CREDITS(x) (((x) >> S_WR_SGE_CREDITS) & M_WR_SGE_CREDITS)
+
+#define S_WR_SGLSFLT 8
+#define M_WR_SGLSFLT 0xFF
+#define V_WR_SGLSFLT(x) ((x) << S_WR_SGLSFLT)
+#define G_WR_SGLSFLT(x) (((x) >> S_WR_SGLSFLT) & M_WR_SGLSFLT)
+
+#define S_WR_BCNTLFLT 16
+#define M_WR_BCNTLFLT 0xF
+#define V_WR_BCNTLFLT(x) ((x) << S_WR_BCNTLFLT)
+#define G_WR_BCNTLFLT(x) (((x) >> S_WR_BCNTLFLT) & M_WR_BCNTLFLT)
+
+#define S_WR_DATATYPE 20
+#define V_WR_DATATYPE(x) ((x) << S_WR_DATATYPE)
+#define F_WR_DATATYPE V_WR_DATATYPE(1U)
+
+#define S_WR_COMPL 21
+#define V_WR_COMPL(x) ((x) << S_WR_COMPL)
+#define F_WR_COMPL V_WR_COMPL(1U)
+
+#define S_WR_EOP 22
+#define V_WR_EOP(x) ((x) << S_WR_EOP)
+#define F_WR_EOP V_WR_EOP(1U)
+
+#define S_WR_SOP 23
+#define V_WR_SOP(x) ((x) << S_WR_SOP)
+#define F_WR_SOP V_WR_SOP(1U)
+
+#define S_WR_OP 24
+#define M_WR_OP 0xFF
+#define V_WR_OP(x) ((x) << S_WR_OP)
+#define G_WR_OP(x) (((x) >> S_WR_OP) & M_WR_OP)
+
+/* wr_lo fields */
+#define S_WR_LEN 0
+#define M_WR_LEN 0xFF
+#define V_WR_LEN(x) ((x) << S_WR_LEN)
+#define G_WR_LEN(x) (((x) >> S_WR_LEN) & M_WR_LEN)
+
+#define S_WR_TID 8
+#define M_WR_TID 0xFFFFF
+#define V_WR_TID(x) ((x) << S_WR_TID)
+#define G_WR_TID(x) (((x) >> S_WR_TID) & M_WR_TID)
+
+#define S_WR_CR_FLUSH 30
+#define V_WR_CR_FLUSH(x) ((x) << S_WR_CR_FLUSH)
+#define F_WR_CR_FLUSH V_WR_CR_FLUSH(1U)
+
+#define S_WR_GEN 31
+#define V_WR_GEN(x) ((x) << S_WR_GEN)
+#define F_WR_GEN V_WR_GEN(1U)
+
+# define WR_HDR struct work_request_hdr wr
+# define RSS_HDR
+#else
+# define WR_HDR
+# define RSS_HDR struct rss_header rss_hdr;
+#endif
+
+/* option 0 lower-half fields */
+#define S_CPL_STATUS 0
+#define M_CPL_STATUS 0xFF
+#define V_CPL_STATUS(x) ((x) << S_CPL_STATUS)
+#define G_CPL_STATUS(x) (((x) >> S_CPL_STATUS) & M_CPL_STATUS)
+
+#define S_INJECT_TIMER 6
+#define V_INJECT_TIMER(x) ((x) << S_INJECT_TIMER)
+#define F_INJECT_TIMER V_INJECT_TIMER(1U)
+
+#define S_NO_OFFLOAD 7
+#define V_NO_OFFLOAD(x) ((x) << S_NO_OFFLOAD)
+#define F_NO_OFFLOAD V_NO_OFFLOAD(1U)
+
+#define S_ULP_MODE 8
+#define M_ULP_MODE 0xF
+#define V_ULP_MODE(x) ((x) << S_ULP_MODE)
+#define G_ULP_MODE(x) (((x) >> S_ULP_MODE) & M_ULP_MODE)
+
+#define S_RCV_BUFSIZ 12
+#define M_RCV_BUFSIZ 0x3FFF
+#define V_RCV_BUFSIZ(x) ((x) << S_RCV_BUFSIZ)
+#define G_RCV_BUFSIZ(x) (((x) >> S_RCV_BUFSIZ) & M_RCV_BUFSIZ)
+
+#define S_TOS 26
+#define M_TOS 0x3F
+#define V_TOS(x) ((x) << S_TOS)
+#define G_TOS(x) (((x) >> S_TOS) & M_TOS)
+
+/* option 0 upper-half fields */
+#define S_DELACK 0
+#define V_DELACK(x) ((x) << S_DELACK)
+#define F_DELACK V_DELACK(1U)
+
+#define S_NO_CONG 1
+#define V_NO_CONG(x) ((x) << S_NO_CONG)
+#define F_NO_CONG V_NO_CONG(1U)
+
+#define S_SRC_MAC_SEL 2
+#define M_SRC_MAC_SEL 0x3
+#define V_SRC_MAC_SEL(x) ((x) << S_SRC_MAC_SEL)
+#define G_SRC_MAC_SEL(x) (((x) >> S_SRC_MAC_SEL) & M_SRC_MAC_SEL)
+
+#define S_L2T_IDX 4
+#define M_L2T_IDX 0x7FF
+#define V_L2T_IDX(x) ((x) << S_L2T_IDX)
+#define G_L2T_IDX(x) (((x) >> S_L2T_IDX) & M_L2T_IDX)
+
+#define S_TX_CHANNEL 15
+#define V_TX_CHANNEL(x) ((x) << S_TX_CHANNEL)
+#define F_TX_CHANNEL V_TX_CHANNEL(1U)
+
+#define S_TCAM_BYPASS 16
+#define V_TCAM_BYPASS(x) ((x) << S_TCAM_BYPASS)
+#define F_TCAM_BYPASS V_TCAM_BYPASS(1U)
+
+#define S_NAGLE 17
+#define V_NAGLE(x) ((x) << S_NAGLE)
+#define F_NAGLE V_NAGLE(1U)
+
+#define S_WND_SCALE 18
+#define M_WND_SCALE 0xF
+#define V_WND_SCALE(x) ((x) << S_WND_SCALE)
+#define G_WND_SCALE(x) (((x) >> S_WND_SCALE) & M_WND_SCALE)
+
+#define S_KEEP_ALIVE 22
+#define V_KEEP_ALIVE(x) ((x) << S_KEEP_ALIVE)
+#define F_KEEP_ALIVE V_KEEP_ALIVE(1U)
+
+#define S_MAX_RETRANS 23
+#define M_MAX_RETRANS 0xF
+#define V_MAX_RETRANS(x) ((x) << S_MAX_RETRANS)
+#define G_MAX_RETRANS(x) (((x) >> S_MAX_RETRANS) & M_MAX_RETRANS)
+
+#define S_MAX_RETRANS_OVERRIDE 27
+#define V_MAX_RETRANS_OVERRIDE(x) ((x) << S_MAX_RETRANS_OVERRIDE)
+#define F_MAX_RETRANS_OVERRIDE V_MAX_RETRANS_OVERRIDE(1U)
+
+#define S_MSS_IDX 28
+#define M_MSS_IDX 0xF
+#define V_MSS_IDX(x) ((x) << S_MSS_IDX)
+#define G_MSS_IDX(x) (((x) >> S_MSS_IDX) & M_MSS_IDX)
+
+/* option 1 fields */
+#define S_RSS_ENABLE 0
+#define V_RSS_ENABLE(x) ((x) << S_RSS_ENABLE)
+#define F_RSS_ENABLE V_RSS_ENABLE(1U)
+
+#define S_RSS_MASK_LEN 1
+#define M_RSS_MASK_LEN 0x7
+#define V_RSS_MASK_LEN(x) ((x) << S_RSS_MASK_LEN)
+#define G_RSS_MASK_LEN(x) (((x) >> S_RSS_MASK_LEN) & M_RSS_MASK_LEN)
+
+#define S_CPU_IDX 4
+#define M_CPU_IDX 0x3F
+#define V_CPU_IDX(x) ((x) << S_CPU_IDX)
+#define G_CPU_IDX(x) (((x) >> S_CPU_IDX) & M_CPU_IDX)
+
+#define S_MAC_MATCH_VALID 18
+#define V_MAC_MATCH_VALID(x) ((x) << S_MAC_MATCH_VALID)
+#define F_MAC_MATCH_VALID V_MAC_MATCH_VALID(1U)
+
+#define S_CONN_POLICY 19
+#define M_CONN_POLICY 0x3
+#define V_CONN_POLICY(x) ((x) << S_CONN_POLICY)
+#define G_CONN_POLICY(x) (((x) >> S_CONN_POLICY) & M_CONN_POLICY)
+
+#define S_SYN_DEFENSE 21
+#define V_SYN_DEFENSE(x) ((x) << S_SYN_DEFENSE)
+#define F_SYN_DEFENSE V_SYN_DEFENSE(1U)
+
+#define S_VLAN_PRI 22
+#define M_VLAN_PRI 0x3
+#define V_VLAN_PRI(x) ((x) << S_VLAN_PRI)
+#define G_VLAN_PRI(x) (((x) >> S_VLAN_PRI) & M_VLAN_PRI)
+
+#define S_VLAN_PRI_VALID 24
+#define V_VLAN_PRI_VALID(x) ((x) << S_VLAN_PRI_VALID)
+#define F_VLAN_PRI_VALID V_VLAN_PRI_VALID(1U)
+
+#define S_PKT_TYPE 25
+#define M_PKT_TYPE 0x3
+#define V_PKT_TYPE(x) ((x) << S_PKT_TYPE)
+#define G_PKT_TYPE(x) (((x) >> S_PKT_TYPE) & M_PKT_TYPE)
+
+#define S_MAC_MATCH 27
+#define M_MAC_MATCH 0x1F
+#define V_MAC_MATCH(x) ((x) << S_MAC_MATCH)
+#define G_MAC_MATCH(x) (((x) >> S_MAC_MATCH) & M_MAC_MATCH)
+
+/* option 2 fields */
+#define S_CPU_INDEX 0
+#define M_CPU_INDEX 0x7F
+#define V_CPU_INDEX(x) ((x) << S_CPU_INDEX)
+#define G_CPU_INDEX(x) (((x) >> S_CPU_INDEX) & M_CPU_INDEX)
+
+#define S_CPU_INDEX_VALID 7
+#define V_CPU_INDEX_VALID(x) ((x) << S_CPU_INDEX_VALID)
+#define F_CPU_INDEX_VALID V_CPU_INDEX_VALID(1U)
+
+#define S_RX_COALESCE 8
+#define M_RX_COALESCE 0x3
+#define V_RX_COALESCE(x) ((x) << S_RX_COALESCE)
+#define G_RX_COALESCE(x) (((x) >> S_RX_COALESCE) & M_RX_COALESCE)
+
+#define S_RX_COALESCE_VALID 10
+#define V_RX_COALESCE_VALID(x) ((x) << S_RX_COALESCE_VALID)
+#define F_RX_COALESCE_VALID V_RX_COALESCE_VALID(1U)
+
+#define S_CONG_CONTROL_FLAVOR 11
+#define M_CONG_CONTROL_FLAVOR 0x3
+#define V_CONG_CONTROL_FLAVOR(x) ((x) << S_CONG_CONTROL_FLAVOR)
+#define G_CONG_CONTROL_FLAVOR(x) (((x) >> S_CONG_CONTROL_FLAVOR) & M_CONG_CONTROL_FLAVOR)
+
+#define S_PACING_FLAVOR 13
+#define M_PACING_FLAVOR 0x3
+#define V_PACING_FLAVOR(x) ((x) << S_PACING_FLAVOR)
+#define G_PACING_FLAVOR(x) (((x) >> S_PACING_FLAVOR) & M_PACING_FLAVOR)
+
+#define S_FLAVORS_VALID 15
+#define V_FLAVORS_VALID(x) ((x) << S_FLAVORS_VALID)
+#define F_FLAVORS_VALID V_FLAVORS_VALID(1U)
+
+#define S_RX_FC_DISABLE 16
+#define V_RX_FC_DISABLE(x) ((x) << S_RX_FC_DISABLE)
+#define F_RX_FC_DISABLE V_RX_FC_DISABLE(1U)
+
+#define S_RX_FC_VALID 17
+#define V_RX_FC_VALID(x) ((x) << S_RX_FC_VALID)
+#define F_RX_FC_VALID V_RX_FC_VALID(1U)
+
+struct cpl_pass_open_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 opt0h;
+ __be32 opt0l;
+ __be32 peer_netmask;
+ __be32 opt1;
+};
+
+struct cpl_pass_open_rpl {
+ RSS_HDR union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __u8 resvd[7];
+ __u8 status;
+};
+
+struct cpl_pass_establish {
+ RSS_HDR union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 tos_tid;
+ __be16 l2t_idx;
+ __be16 tcp_opt;
+ __be32 snd_isn;
+ __be32 rcv_isn;
+};
+
+/* cpl_pass_establish.tos_tid fields */
+#define S_PASS_OPEN_TID 0
+#define M_PASS_OPEN_TID 0xFFFFFF
+#define V_PASS_OPEN_TID(x) ((x) << S_PASS_OPEN_TID)
+#define G_PASS_OPEN_TID(x) (((x) >> S_PASS_OPEN_TID) & M_PASS_OPEN_TID)
+
+#define S_PASS_OPEN_TOS 24
+#define M_PASS_OPEN_TOS 0xFF
+#define V_PASS_OPEN_TOS(x) ((x) << S_PASS_OPEN_TOS)
+#define G_PASS_OPEN_TOS(x) (((x) >> S_PASS_OPEN_TOS) & M_PASS_OPEN_TOS)
+
+/* cpl_pass_establish.l2t_idx fields */
+#define S_L2T_IDX16 5
+#define M_L2T_IDX16 0x7FF
+#define V_L2T_IDX16(x) ((x) << S_L2T_IDX16)
+#define G_L2T_IDX16(x) (((x) >> S_L2T_IDX16) & M_L2T_IDX16)
+
+/* cpl_pass_establish.tcp_opt fields (also applies act_open_establish) */
+#define G_TCPOPT_WSCALE_OK(x) (((x) >> 5) & 1)
+#define G_TCPOPT_SACK(x) (((x) >> 6) & 1)
+#define G_TCPOPT_TSTAMP(x) (((x) >> 7) & 1)
+#define G_TCPOPT_SND_WSCALE(x) (((x) >> 8) & 0xf)
+#define G_TCPOPT_MSS(x) (((x) >> 12) & 0xf)
+
+struct cpl_pass_accept_req {
+ RSS_HDR union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 tos_tid;
+ struct tcp_options tcp_options;
+ __u8 dst_mac[6];
+ __be16 vlan_tag;
+ __u8 src_mac[6];
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8:3;
+ __u8 addr_idx:3;
+ __u8 port_idx:1;
+ __u8 exact_match:1;
+#else
+ __u8 exact_match:1;
+ __u8 port_idx:1;
+ __u8 addr_idx:3;
+ __u8:3;
+#endif
+ __u8 rsvd;
+ __be32 rcv_isn;
+ __be32 rsvd2;
+};
+
+struct cpl_pass_accept_rpl {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 opt2;
+ __be32 rsvd;
+ __be32 peer_ip;
+ __be32 opt0h;
+ __be32 opt0l_status;
+};
+
+struct cpl_act_open_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 opt0h;
+ __be32 opt0l;
+ __be32 params;
+ __be32 opt2;
+};
+
+/* cpl_act_open_req.params fields */
+#define S_AOPEN_VLAN_PRI 9
+#define M_AOPEN_VLAN_PRI 0x3
+#define V_AOPEN_VLAN_PRI(x) ((x) << S_AOPEN_VLAN_PRI)
+#define G_AOPEN_VLAN_PRI(x) (((x) >> S_AOPEN_VLAN_PRI) & M_AOPEN_VLAN_PRI)
+
+#define S_AOPEN_VLAN_PRI_VALID 11
+#define V_AOPEN_VLAN_PRI_VALID(x) ((x) << S_AOPEN_VLAN_PRI_VALID)
+#define F_AOPEN_VLAN_PRI_VALID V_AOPEN_VLAN_PRI_VALID(1U)
+
+#define S_AOPEN_PKT_TYPE 12
+#define M_AOPEN_PKT_TYPE 0x3
+#define V_AOPEN_PKT_TYPE(x) ((x) << S_AOPEN_PKT_TYPE)
+#define G_AOPEN_PKT_TYPE(x) (((x) >> S_AOPEN_PKT_TYPE) & M_AOPEN_PKT_TYPE)
+
+#define S_AOPEN_MAC_MATCH 14
+#define M_AOPEN_MAC_MATCH 0x1F
+#define V_AOPEN_MAC_MATCH(x) ((x) << S_AOPEN_MAC_MATCH)
+#define G_AOPEN_MAC_MATCH(x) (((x) >> S_AOPEN_MAC_MATCH) & M_AOPEN_MAC_MATCH)
+
+#define S_AOPEN_MAC_MATCH_VALID 19
+#define V_AOPEN_MAC_MATCH_VALID(x) ((x) << S_AOPEN_MAC_MATCH_VALID)
+#define F_AOPEN_MAC_MATCH_VALID V_AOPEN_MAC_MATCH_VALID(1U)
+
+#define S_AOPEN_IFF_VLAN 20
+#define M_AOPEN_IFF_VLAN 0xFFF
+#define V_AOPEN_IFF_VLAN(x) ((x) << S_AOPEN_IFF_VLAN)
+#define G_AOPEN_IFF_VLAN(x) (((x) >> S_AOPEN_IFF_VLAN) & M_AOPEN_IFF_VLAN)
+
+struct cpl_act_open_rpl {
+ RSS_HDR union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 atid;
+ __u8 rsvd[3];
+ __u8 status;
+};
+
+struct cpl_act_establish {
+ RSS_HDR union opcode_tid ot;
+ __be16 local_port;
+ __be16 peer_port;
+ __be32 local_ip;
+ __be32 peer_ip;
+ __be32 tos_tid;
+ __be16 l2t_idx;
+ __be16 tcp_opt;
+ __be32 snd_isn;
+ __be32 rcv_isn;
+};
+
+struct cpl_get_tcb {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 cpuno;
+ __be16 rsvd;
+};
+
+struct cpl_get_tcb_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 rsvd;
+ __u8 status;
+ __be16 len;
+};
+
+struct cpl_set_tcb {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 reply;
+ __u8 cpu_idx;
+ __be16 len;
+};
+
+/* cpl_set_tcb.reply fields */
+#define S_NO_REPLY 7
+#define V_NO_REPLY(x) ((x) << S_NO_REPLY)
+#define F_NO_REPLY V_NO_REPLY(1U)
+
+struct cpl_set_tcb_field {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 reply;
+ __u8 cpu_idx;
+ __be16 word;
+ __be64 mask;
+ __be64 val;
+};
+
+struct cpl_set_tcb_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 rsvd[3];
+ __u8 status;
+};
+
+struct cpl_pcmd {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 rsvd[3];
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 src:1;
+ __u8 bundle:1;
+ __u8 channel:1;
+ __u8:5;
+#else
+ __u8:5;
+ __u8 channel:1;
+ __u8 bundle:1;
+ __u8 src:1;
+#endif
+ __be32 pcmd_parm[2];
+};
+
+struct cpl_pcmd_reply {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd;
+ __be16 len;
+};
+
+struct cpl_close_con_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd;
+};
+
+struct cpl_close_con_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 rsvd[3];
+ __u8 status;
+ __be32 snd_nxt;
+ __be32 rcv_nxt;
+};
+
+struct cpl_close_listserv_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 rsvd0;
+ __u8 cpu_idx;
+ __be16 rsvd1;
+};
+
+struct cpl_close_listserv_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 rsvd[3];
+ __u8 status;
+};
+
+struct cpl_abort_req_rss {
+ RSS_HDR union opcode_tid ot;
+ __be32 rsvd0;
+ __u8 rsvd1;
+ __u8 status;
+ __u8 rsvd2[6];
+};
+
+struct cpl_abort_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd0;
+ __u8 rsvd1;
+ __u8 cmd;
+ __u8 rsvd2[6];
+};
+
+struct cpl_abort_rpl_rss {
+ RSS_HDR union opcode_tid ot;
+ __be32 rsvd0;
+ __u8 rsvd1;
+ __u8 status;
+ __u8 rsvd2[6];
+};
+
+struct cpl_abort_rpl {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd0;
+ __u8 rsvd1;
+ __u8 cmd;
+ __u8 rsvd2[6];
+};
+
+struct cpl_peer_close {
+ RSS_HDR union opcode_tid ot;
+ __be32 rcv_nxt;
+};
+
+struct tx_data_wr {
+ __be32 wr_hi;
+ __be32 wr_lo;
+ __be32 len;
+ __be32 flags;
+ __be32 sndseq;
+ __be32 param;
+};
+
+/* tx_data_wr.param fields */
+#define S_TX_PORT 0
+#define M_TX_PORT 0x7
+#define V_TX_PORT(x) ((x) << S_TX_PORT)
+#define G_TX_PORT(x) (((x) >> S_TX_PORT) & M_TX_PORT)
+
+#define S_TX_MSS 4
+#define M_TX_MSS 0xF
+#define V_TX_MSS(x) ((x) << S_TX_MSS)
+#define G_TX_MSS(x) (((x) >> S_TX_MSS) & M_TX_MSS)
+
+#define S_TX_QOS 8
+#define M_TX_QOS 0xFF
+#define V_TX_QOS(x) ((x) << S_TX_QOS)
+#define G_TX_QOS(x) (((x) >> S_TX_QOS) & M_TX_QOS)
+
+#define S_TX_SNDBUF 16
+#define M_TX_SNDBUF 0xFFFF
+#define V_TX_SNDBUF(x) ((x) << S_TX_SNDBUF)
+#define G_TX_SNDBUF(x) (((x) >> S_TX_SNDBUF) & M_TX_SNDBUF)
+
+struct cpl_tx_data {
+ union opcode_tid ot;
+ __be32 len;
+ __be32 rsvd;
+ __be16 urg;
+ __be16 flags;
+};
+
+/* cpl_tx_data.flags fields */
+#define S_TX_ULP_SUBMODE 6
+#define M_TX_ULP_SUBMODE 0xF
+#define V_TX_ULP_SUBMODE(x) ((x) << S_TX_ULP_SUBMODE)
+#define G_TX_ULP_SUBMODE(x) (((x) >> S_TX_ULP_SUBMODE) & M_TX_ULP_SUBMODE)
+
+#define S_TX_ULP_MODE 10
+#define M_TX_ULP_MODE 0xF
+#define V_TX_ULP_MODE(x) ((x) << S_TX_ULP_MODE)
+#define G_TX_ULP_MODE(x) (((x) >> S_TX_ULP_MODE) & M_TX_ULP_MODE)
+
+#define S_TX_SHOVE 14
+#define V_TX_SHOVE(x) ((x) << S_TX_SHOVE)
+#define F_TX_SHOVE V_TX_SHOVE(1U)
+
+#define S_TX_MORE 15
+#define V_TX_MORE(x) ((x) << S_TX_MORE)
+#define F_TX_MORE V_TX_MORE(1U)
+
+/* additional tx_data_wr.flags fields */
+#define S_TX_CPU_IDX 0
+#define M_TX_CPU_IDX 0x3F
+#define V_TX_CPU_IDX(x) ((x) << S_TX_CPU_IDX)
+#define G_TX_CPU_IDX(x) (((x) >> S_TX_CPU_IDX) & M_TX_CPU_IDX)
+
+#define S_TX_URG 16
+#define V_TX_URG(x) ((x) << S_TX_URG)
+#define F_TX_URG V_TX_URG(1U)
+
+#define S_TX_CLOSE 17
+#define V_TX_CLOSE(x) ((x) << S_TX_CLOSE)
+#define F_TX_CLOSE V_TX_CLOSE(1U)
+
+#define S_TX_INIT 18
+#define V_TX_INIT(x) ((x) << S_TX_INIT)
+#define F_TX_INIT V_TX_INIT(1U)
+
+#define S_TX_IMM_ACK 19
+#define V_TX_IMM_ACK(x) ((x) << S_TX_IMM_ACK)
+#define F_TX_IMM_ACK V_TX_IMM_ACK(1U)
+
+#define S_TX_IMM_DMA 20
+#define V_TX_IMM_DMA(x) ((x) << S_TX_IMM_DMA)
+#define F_TX_IMM_DMA V_TX_IMM_DMA(1U)
+
+struct cpl_tx_data_ack {
+ RSS_HDR union opcode_tid ot;
+ __be32 ack_seq;
+};
+
+struct cpl_wr_ack {
+ RSS_HDR union opcode_tid ot;
+ __be16 credits;
+ __be16 rsvd;
+ __be32 snd_nxt;
+ __be32 snd_una;
+};
+
+struct cpl_rdma_ec_status {
+ RSS_HDR union opcode_tid ot;
+ __u8 rsvd[3];
+ __u8 status;
+};
+
+struct mngt_pktsched_wr {
+ __be32 wr_hi;
+ __be32 wr_lo;
+ __u8 mngt_opcode;
+ __u8 rsvd[7];
+ __u8 sched;
+ __u8 idx;
+ __u8 min;
+ __u8 max;
+ __u8 binding;
+ __u8 rsvd1[3];
+};
+
+struct cpl_iscsi_hdr {
+ RSS_HDR union opcode_tid ot;
+ __be16 pdu_len_ddp;
+ __be16 len;
+ __be32 seq;
+ __be16 urg;
+ __u8 rsvd;
+ __u8 status;
+};
+
+/* cpl_iscsi_hdr.pdu_len_ddp fields */
+#define S_ISCSI_PDU_LEN 0
+#define M_ISCSI_PDU_LEN 0x7FFF
+#define V_ISCSI_PDU_LEN(x) ((x) << S_ISCSI_PDU_LEN)
+#define G_ISCSI_PDU_LEN(x) (((x) >> S_ISCSI_PDU_LEN) & M_ISCSI_PDU_LEN)
+
+#define S_ISCSI_DDP 15
+#define V_ISCSI_DDP(x) ((x) << S_ISCSI_DDP)
+#define F_ISCSI_DDP V_ISCSI_DDP(1U)
+
+struct cpl_rx_data {
+ RSS_HDR union opcode_tid ot;
+ __be16 rsvd;
+ __be16 len;
+ __be32 seq;
+ __be16 urg;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 dack_mode:2;
+ __u8 psh:1;
+ __u8 heartbeat:1;
+ __u8:4;
+#else
+ __u8:4;
+ __u8 heartbeat:1;
+ __u8 psh:1;
+ __u8 dack_mode:2;
+#endif
+ __u8 status;
+};
+
+struct cpl_rx_data_ack {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 credit_dack;
+};
+
+/* cpl_rx_data_ack.ack_seq fields */
+#define S_RX_CREDITS 0
+#define M_RX_CREDITS 0x7FFFFFF
+#define V_RX_CREDITS(x) ((x) << S_RX_CREDITS)
+#define G_RX_CREDITS(x) (((x) >> S_RX_CREDITS) & M_RX_CREDITS)
+
+#define S_RX_MODULATE 27
+#define V_RX_MODULATE(x) ((x) << S_RX_MODULATE)
+#define F_RX_MODULATE V_RX_MODULATE(1U)
+
+#define S_RX_FORCE_ACK 28
+#define V_RX_FORCE_ACK(x) ((x) << S_RX_FORCE_ACK)
+#define F_RX_FORCE_ACK V_RX_FORCE_ACK(1U)
+
+#define S_RX_DACK_MODE 29
+#define M_RX_DACK_MODE 0x3
+#define V_RX_DACK_MODE(x) ((x) << S_RX_DACK_MODE)
+#define G_RX_DACK_MODE(x) (((x) >> S_RX_DACK_MODE) & M_RX_DACK_MODE)
+
+#define S_RX_DACK_CHANGE 31
+#define V_RX_DACK_CHANGE(x) ((x) << S_RX_DACK_CHANGE)
+#define F_RX_DACK_CHANGE V_RX_DACK_CHANGE(1U)
+
+struct cpl_rx_urg_notify {
+ RSS_HDR union opcode_tid ot;
+ __be32 seq;
+};
+
+struct cpl_rx_ddp_complete {
+ RSS_HDR union opcode_tid ot;
+ __be32 ddp_report;
+};
+
+struct cpl_rx_data_ddp {
+ RSS_HDR union opcode_tid ot;
+ __be16 urg;
+ __be16 len;
+ __be32 seq;
+ union {
+ __be32 nxt_seq;
+ __be32 ddp_report;
+ };
+ __be32 ulp_crc;
+ __be32 ddpvld_status;
+};
+
+/* cpl_rx_data_ddp.ddpvld_status fields */
+#define S_DDP_STATUS 0
+#define M_DDP_STATUS 0xFF
+#define V_DDP_STATUS(x) ((x) << S_DDP_STATUS)
+#define G_DDP_STATUS(x) (((x) >> S_DDP_STATUS) & M_DDP_STATUS)
+
+#define S_DDP_VALID 15
+#define M_DDP_VALID 0x1FFFF
+#define V_DDP_VALID(x) ((x) << S_DDP_VALID)
+#define G_DDP_VALID(x) (((x) >> S_DDP_VALID) & M_DDP_VALID)
+
+#define S_DDP_PPOD_MISMATCH 15
+#define V_DDP_PPOD_MISMATCH(x) ((x) << S_DDP_PPOD_MISMATCH)
+#define F_DDP_PPOD_MISMATCH V_DDP_PPOD_MISMATCH(1U)
+
+#define S_DDP_PDU 16
+#define V_DDP_PDU(x) ((x) << S_DDP_PDU)
+#define F_DDP_PDU V_DDP_PDU(1U)
+
+#define S_DDP_LLIMIT_ERR 17
+#define V_DDP_LLIMIT_ERR(x) ((x) << S_DDP_LLIMIT_ERR)
+#define F_DDP_LLIMIT_ERR V_DDP_LLIMIT_ERR(1U)
+
+#define S_DDP_PPOD_PARITY_ERR 18
+#define V_DDP_PPOD_PARITY_ERR(x) ((x) << S_DDP_PPOD_PARITY_ERR)
+#define F_DDP_PPOD_PARITY_ERR V_DDP_PPOD_PARITY_ERR(1U)
+
+#define S_DDP_PADDING_ERR 19
+#define V_DDP_PADDING_ERR(x) ((x) << S_DDP_PADDING_ERR)
+#define F_DDP_PADDING_ERR V_DDP_PADDING_ERR(1U)
+
+#define S_DDP_HDRCRC_ERR 20
+#define V_DDP_HDRCRC_ERR(x) ((x) << S_DDP_HDRCRC_ERR)
+#define F_DDP_HDRCRC_ERR V_DDP_HDRCRC_ERR(1U)
+
+#define S_DDP_DATACRC_ERR 21
+#define V_DDP_DATACRC_ERR(x) ((x) << S_DDP_DATACRC_ERR)
+#define F_DDP_DATACRC_ERR V_DDP_DATACRC_ERR(1U)
+
+#define S_DDP_INVALID_TAG 22
+#define V_DDP_INVALID_TAG(x) ((x) << S_DDP_INVALID_TAG)
+#define F_DDP_INVALID_TAG V_DDP_INVALID_TAG(1U)
+
+#define S_DDP_ULIMIT_ERR 23
+#define V_DDP_ULIMIT_ERR(x) ((x) << S_DDP_ULIMIT_ERR)
+#define F_DDP_ULIMIT_ERR V_DDP_ULIMIT_ERR(1U)
+
+#define S_DDP_OFFSET_ERR 24
+#define V_DDP_OFFSET_ERR(x) ((x) << S_DDP_OFFSET_ERR)
+#define F_DDP_OFFSET_ERR V_DDP_OFFSET_ERR(1U)
+
+#define S_DDP_COLOR_ERR 25
+#define V_DDP_COLOR_ERR(x) ((x) << S_DDP_COLOR_ERR)
+#define F_DDP_COLOR_ERR V_DDP_COLOR_ERR(1U)
+
+#define S_DDP_TID_MISMATCH 26
+#define V_DDP_TID_MISMATCH(x) ((x) << S_DDP_TID_MISMATCH)
+#define F_DDP_TID_MISMATCH V_DDP_TID_MISMATCH(1U)
+
+#define S_DDP_INVALID_PPOD 27
+#define V_DDP_INVALID_PPOD(x) ((x) << S_DDP_INVALID_PPOD)
+#define F_DDP_INVALID_PPOD V_DDP_INVALID_PPOD(1U)
+
+#define S_DDP_ULP_MODE 28
+#define M_DDP_ULP_MODE 0xF
+#define V_DDP_ULP_MODE(x) ((x) << S_DDP_ULP_MODE)
+#define G_DDP_ULP_MODE(x) (((x) >> S_DDP_ULP_MODE) & M_DDP_ULP_MODE)
+
+/* cpl_rx_data_ddp.ddp_report fields */
+#define S_DDP_OFFSET 0
+#define M_DDP_OFFSET 0x3FFFFF
+#define V_DDP_OFFSET(x) ((x) << S_DDP_OFFSET)
+#define G_DDP_OFFSET(x) (((x) >> S_DDP_OFFSET) & M_DDP_OFFSET)
+
+#define S_DDP_URG 24
+#define V_DDP_URG(x) ((x) << S_DDP_URG)
+#define F_DDP_URG V_DDP_URG(1U)
+
+#define S_DDP_PSH 25
+#define V_DDP_PSH(x) ((x) << S_DDP_PSH)
+#define F_DDP_PSH V_DDP_PSH(1U)
+
+#define S_DDP_BUF_COMPLETE 26
+#define V_DDP_BUF_COMPLETE(x) ((x) << S_DDP_BUF_COMPLETE)
+#define F_DDP_BUF_COMPLETE V_DDP_BUF_COMPLETE(1U)
+
+#define S_DDP_BUF_TIMED_OUT 27
+#define V_DDP_BUF_TIMED_OUT(x) ((x) << S_DDP_BUF_TIMED_OUT)
+#define F_DDP_BUF_TIMED_OUT V_DDP_BUF_TIMED_OUT(1U)
+
+#define S_DDP_BUF_IDX 28
+#define V_DDP_BUF_IDX(x) ((x) << S_DDP_BUF_IDX)
+#define F_DDP_BUF_IDX V_DDP_BUF_IDX(1U)
+
+struct cpl_tx_pkt {
+ WR_HDR;
+ __be32 cntrl;
+ __be32 len;
+};
+
+struct cpl_tx_pkt_lso {
+ WR_HDR;
+ __be32 cntrl;
+ __be32 len;
+
+ __be32 rsvd;
+ __be32 lso_info;
+};
+
+/* cpl_tx_pkt*.cntrl fields */
+#define S_TXPKT_VLAN 0
+#define M_TXPKT_VLAN 0xFFFF
+#define V_TXPKT_VLAN(x) ((x) << S_TXPKT_VLAN)
+#define G_TXPKT_VLAN(x) (((x) >> S_TXPKT_VLAN) & M_TXPKT_VLAN)
+
+#define S_TXPKT_INTF 16
+#define M_TXPKT_INTF 0xF
+#define V_TXPKT_INTF(x) ((x) << S_TXPKT_INTF)
+#define G_TXPKT_INTF(x) (((x) >> S_TXPKT_INTF) & M_TXPKT_INTF)
+
+#define S_TXPKT_IPCSUM_DIS 20
+#define V_TXPKT_IPCSUM_DIS(x) ((x) << S_TXPKT_IPCSUM_DIS)
+#define F_TXPKT_IPCSUM_DIS V_TXPKT_IPCSUM_DIS(1U)
+
+#define S_TXPKT_L4CSUM_DIS 21
+#define V_TXPKT_L4CSUM_DIS(x) ((x) << S_TXPKT_L4CSUM_DIS)
+#define F_TXPKT_L4CSUM_DIS V_TXPKT_L4CSUM_DIS(1U)
+
+#define S_TXPKT_VLAN_VLD 22
+#define V_TXPKT_VLAN_VLD(x) ((x) << S_TXPKT_VLAN_VLD)
+#define F_TXPKT_VLAN_VLD V_TXPKT_VLAN_VLD(1U)
+
+#define S_TXPKT_LOOPBACK 23
+#define V_TXPKT_LOOPBACK(x) ((x) << S_TXPKT_LOOPBACK)
+#define F_TXPKT_LOOPBACK V_TXPKT_LOOPBACK(1U)
+
+#define S_TXPKT_OPCODE 24
+#define M_TXPKT_OPCODE 0xFF
+#define V_TXPKT_OPCODE(x) ((x) << S_TXPKT_OPCODE)
+#define G_TXPKT_OPCODE(x) (((x) >> S_TXPKT_OPCODE) & M_TXPKT_OPCODE)
+
+/* cpl_tx_pkt_lso.lso_info fields */
+#define S_LSO_MSS 0
+#define M_LSO_MSS 0x3FFF
+#define V_LSO_MSS(x) ((x) << S_LSO_MSS)
+#define G_LSO_MSS(x) (((x) >> S_LSO_MSS) & M_LSO_MSS)
+
+#define S_LSO_ETH_TYPE 14
+#define M_LSO_ETH_TYPE 0x3
+#define V_LSO_ETH_TYPE(x) ((x) << S_LSO_ETH_TYPE)
+#define G_LSO_ETH_TYPE(x) (((x) >> S_LSO_ETH_TYPE) & M_LSO_ETH_TYPE)
+
+#define S_LSO_TCPHDR_WORDS 16
+#define M_LSO_TCPHDR_WORDS 0xF
+#define V_LSO_TCPHDR_WORDS(x) ((x) << S_LSO_TCPHDR_WORDS)
+#define G_LSO_TCPHDR_WORDS(x) (((x) >> S_LSO_TCPHDR_WORDS) & M_LSO_TCPHDR_WORDS)
+
+#define S_LSO_IPHDR_WORDS 20
+#define M_LSO_IPHDR_WORDS 0xF
+#define V_LSO_IPHDR_WORDS(x) ((x) << S_LSO_IPHDR_WORDS)
+#define G_LSO_IPHDR_WORDS(x) (((x) >> S_LSO_IPHDR_WORDS) & M_LSO_IPHDR_WORDS)
+
+#define S_LSO_IPV6 24
+#define V_LSO_IPV6(x) ((x) << S_LSO_IPV6)
+#define F_LSO_IPV6 V_LSO_IPV6(1U)
+
+struct cpl_trace_pkt {
+#ifdef CHELSIO_FW
+ __u8 rss_opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 err:1;
+ __u8:7;
+#else
+ __u8:7;
+ __u8 err:1;
+#endif
+ __u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 qid:4;
+ __u8:4;
+#else
+ __u8:4;
+ __u8 qid:4;
+#endif
+ __be32 tstamp;
+#endif /* CHELSIO_FW */
+
+ __u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 iff:4;
+ __u8:4;
+#else
+ __u8:4;
+ __u8 iff:4;
+#endif
+ __u8 rsvd[4];
+ __be16 len;
+};
+
+struct cpl_rx_pkt {
+ RSS_HDR __u8 opcode;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 iff:4;
+ __u8 csum_valid:1;
+ __u8 ipmi_pkt:1;
+ __u8 vlan_valid:1;
+ __u8 fragment:1;
+#else
+ __u8 fragment:1;
+ __u8 vlan_valid:1;
+ __u8 ipmi_pkt:1;
+ __u8 csum_valid:1;
+ __u8 iff:4;
+#endif
+ __be16 csum;
+ __be16 vlan;
+ __be16 len;
+};
+
+struct cpl_l2t_write_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 params;
+ __u8 rsvd[2];
+ __u8 dst_mac[6];
+};
+
+/* cpl_l2t_write_req.params fields */
+#define S_L2T_W_IDX 0
+#define M_L2T_W_IDX 0x7FF
+#define V_L2T_W_IDX(x) ((x) << S_L2T_W_IDX)
+#define G_L2T_W_IDX(x) (((x) >> S_L2T_W_IDX) & M_L2T_W_IDX)
+
+#define S_L2T_W_VLAN 11
+#define M_L2T_W_VLAN 0xFFF
+#define V_L2T_W_VLAN(x) ((x) << S_L2T_W_VLAN)
+#define G_L2T_W_VLAN(x) (((x) >> S_L2T_W_VLAN) & M_L2T_W_VLAN)
+
+#define S_L2T_W_IFF 23
+#define M_L2T_W_IFF 0xF
+#define V_L2T_W_IFF(x) ((x) << S_L2T_W_IFF)
+#define G_L2T_W_IFF(x) (((x) >> S_L2T_W_IFF) & M_L2T_W_IFF)
+
+#define S_L2T_W_PRIO 27
+#define M_L2T_W_PRIO 0x7
+#define V_L2T_W_PRIO(x) ((x) << S_L2T_W_PRIO)
+#define G_L2T_W_PRIO(x) (((x) >> S_L2T_W_PRIO) & M_L2T_W_PRIO)
+
+struct cpl_l2t_write_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd[3];
+};
+
+struct cpl_l2t_read_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be16 rsvd;
+ __be16 l2t_idx;
+};
+
+struct cpl_l2t_read_rpl {
+ RSS_HDR union opcode_tid ot;
+ __be32 params;
+ __u8 rsvd[2];
+ __u8 dst_mac[6];
+};
+
+/* cpl_l2t_read_rpl.params fields */
+#define S_L2T_R_PRIO 0
+#define M_L2T_R_PRIO 0x7
+#define V_L2T_R_PRIO(x) ((x) << S_L2T_R_PRIO)
+#define G_L2T_R_PRIO(x) (((x) >> S_L2T_R_PRIO) & M_L2T_R_PRIO)
+
+#define S_L2T_R_VLAN 8
+#define M_L2T_R_VLAN 0xFFF
+#define V_L2T_R_VLAN(x) ((x) << S_L2T_R_VLAN)
+#define G_L2T_R_VLAN(x) (((x) >> S_L2T_R_VLAN) & M_L2T_R_VLAN)
+
+#define S_L2T_R_IFF 20
+#define M_L2T_R_IFF 0xF
+#define V_L2T_R_IFF(x) ((x) << S_L2T_R_IFF)
+#define G_L2T_R_IFF(x) (((x) >> S_L2T_R_IFF) & M_L2T_R_IFF)
+
+#define S_L2T_STATUS 24
+#define M_L2T_STATUS 0xFF
+#define V_L2T_STATUS(x) ((x) << S_L2T_STATUS)
+#define G_L2T_STATUS(x) (((x) >> S_L2T_STATUS) & M_L2T_STATUS)
+
+struct cpl_smt_write_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 mtu_idx:4;
+ __u8 iff:4;
+#else
+ __u8 iff:4;
+ __u8 mtu_idx:4;
+#endif
+ __be16 rsvd2;
+ __be16 rsvd3;
+ __u8 src_mac1[6];
+ __be16 rsvd4;
+ __u8 src_mac0[6];
+};
+
+struct cpl_smt_write_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd[3];
+};
+
+struct cpl_smt_read_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __u8 rsvd0;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8:4;
+ __u8 iff:4;
+#else
+ __u8 iff:4;
+ __u8:4;
+#endif
+ __be16 rsvd2;
+};
+
+struct cpl_smt_read_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 mtu_idx:4;
+ __u8:4;
+#else
+ __u8:4;
+ __u8 mtu_idx:4;
+#endif
+ __be16 rsvd2;
+ __be16 rsvd3;
+ __u8 src_mac1[6];
+ __be16 rsvd4;
+ __u8 src_mac0[6];
+};
+
+struct cpl_rte_delete_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 params;
+};
+
+/* { cpl_rte_delete_req, cpl_rte_read_req }.params fields */
+#define S_RTE_REQ_LUT_IX 8
+#define M_RTE_REQ_LUT_IX 0x7FF
+#define V_RTE_REQ_LUT_IX(x) ((x) << S_RTE_REQ_LUT_IX)
+#define G_RTE_REQ_LUT_IX(x) (((x) >> S_RTE_REQ_LUT_IX) & M_RTE_REQ_LUT_IX)
+
+#define S_RTE_REQ_LUT_BASE 19
+#define M_RTE_REQ_LUT_BASE 0x7FF
+#define V_RTE_REQ_LUT_BASE(x) ((x) << S_RTE_REQ_LUT_BASE)
+#define G_RTE_REQ_LUT_BASE(x) (((x) >> S_RTE_REQ_LUT_BASE) & M_RTE_REQ_LUT_BASE)
+
+#define S_RTE_READ_REQ_SELECT 31
+#define V_RTE_READ_REQ_SELECT(x) ((x) << S_RTE_READ_REQ_SELECT)
+#define F_RTE_READ_REQ_SELECT V_RTE_READ_REQ_SELECT(1U)
+
+struct cpl_rte_delete_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd[3];
+};
+
+struct cpl_rte_write_req {
+ WR_HDR;
+ union opcode_tid ot;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8:6;
+ __u8 write_tcam:1;
+ __u8 write_l2t_lut:1;
+#else
+ __u8 write_l2t_lut:1;
+ __u8 write_tcam:1;
+ __u8:6;
+#endif
+ __u8 rsvd[3];
+ __be32 lut_params;
+ __be16 rsvd2;
+ __be16 l2t_idx;
+ __be32 netmask;
+ __be32 faddr;
+};
+
+/* cpl_rte_write_req.lut_params fields */
+#define S_RTE_WRITE_REQ_LUT_IX 10
+#define M_RTE_WRITE_REQ_LUT_IX 0x7FF
+#define V_RTE_WRITE_REQ_LUT_IX(x) ((x) << S_RTE_WRITE_REQ_LUT_IX)
+#define G_RTE_WRITE_REQ_LUT_IX(x) (((x) >> S_RTE_WRITE_REQ_LUT_IX) & M_RTE_WRITE_REQ_LUT_IX)
+
+#define S_RTE_WRITE_REQ_LUT_BASE 21
+#define M_RTE_WRITE_REQ_LUT_BASE 0x7FF
+#define V_RTE_WRITE_REQ_LUT_BASE(x) ((x) << S_RTE_WRITE_REQ_LUT_BASE)
+#define G_RTE_WRITE_REQ_LUT_BASE(x) (((x) >> S_RTE_WRITE_REQ_LUT_BASE) & M_RTE_WRITE_REQ_LUT_BASE)
+
+struct cpl_rte_write_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd[3];
+};
+
+struct cpl_rte_read_req {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 params;
+};
+
+struct cpl_rte_read_rpl {
+ RSS_HDR union opcode_tid ot;
+ __u8 status;
+ __u8 rsvd0;
+ __be16 l2t_idx;
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8:7;
+ __u8 select:1;
+#else
+ __u8 select:1;
+ __u8:7;
+#endif
+ __u8 rsvd2[3];
+ __be32 addr;
+};
+
+struct cpl_tid_release {
+ WR_HDR;
+ union opcode_tid ot;
+ __be32 rsvd;
+};
+
+struct cpl_barrier {
+ WR_HDR;
+ __u8 opcode;
+ __u8 rsvd[7];
+};
+
+struct cpl_rdma_read_req {
+ __u8 opcode;
+ __u8 rsvd[15];
+};
+
+struct cpl_rdma_terminate {
+#ifdef CHELSIO_FW
+ __u8 opcode;
+ __u8 rsvd[2];
+#if defined(__LITTLE_ENDIAN_BITFIELD)
+ __u8 rspq:3;
+ __u8:5;
+#else
+ __u8:5;
+ __u8 rspq:3;
+#endif
+ __be32 tid_len;
+#endif
+ __be32 msn;
+ __be32 mo;
+ __u8 data[0];
+};
+
+/* cpl_rdma_terminate.tid_len fields */
+#define S_FLIT_CNT 0
+#define M_FLIT_CNT 0xFF
+#define V_FLIT_CNT(x) ((x) << S_FLIT_CNT)
+#define G_FLIT_CNT(x) (((x) >> S_FLIT_CNT) & M_FLIT_CNT)
+
+#define S_TERM_TID 8
+#define M_TERM_TID 0xFFFFF
+#define V_TERM_TID(x) ((x) << S_TERM_TID)
+#define G_TERM_TID(x) (((x) >> S_TERM_TID) & M_TERM_TID)
+#endif /* T3_CPL_H */
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+#include "sge_defs.h"
+#include "firmware_exports.h"
+
+/**
+ * t3_wait_op_done_val - wait until an operation is completed
+ * @adapter: the adapter performing the operation
+ * @reg: the register to check for completion
+ * @mask: a single-bit field within @reg that indicates completion
+ * @polarity: the value of the field when the operation is completed
+ * @attempts: number of check iterations
+ * @delay: delay in usecs between iterations
+ * @valp: where to store the value of the register at completion time
+ *
+ * Wait until an operation is completed by checking a bit in a register
+ * up to @attempts times. If @valp is not NULL the value of the register
+ * at the time it indicated completion is stored there. Returns 0 if the
+ * operation completes and -EAGAIN otherwise.
+ */
+
+int t3_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
+ int polarity, int attempts, int delay, u32 *valp)
+{
+ while (1) {
+ u32 val = t3_read_reg(adapter, reg);
+
+ if (!!(val & mask) == polarity) {
+ if (valp)
+ *valp = val;
+ return 0;
+ }
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ udelay(delay);
+ }
+}
+
+/**
+ * t3_write_regs - write a bunch of registers
+ * @adapter: the adapter to program
+ * @p: an array of register address/register value pairs
+ * @n: the number of address/value pairs
+ * @offset: register address offset
+ *
+ * Takes an array of register address/register value pairs and writes each
+ * value to the corresponding register. Register addresses are adjusted
+ * by the supplied offset.
+ */
+void t3_write_regs(struct adapter *adapter, const struct addr_val_pair *p,
+ int n, unsigned int offset)
+{
+ while (n--) {
+ t3_write_reg(adapter, p->reg_addr + offset, p->val);
+ p++;
+ }
+}
+
+/**
+ * t3_set_reg_field - set a register field to a value
+ * @adapter: the adapter to program
+ * @addr: the register address
+ * @mask: specifies the portion of the register to modify
+ * @val: the new value for the register field
+ *
+ * Sets a register field specified by the supplied mask to the
+ * given value.
+ */
+void t3_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
+ u32 val)
+{
+ u32 v = t3_read_reg(adapter, addr) & ~mask;
+
+ t3_write_reg(adapter, addr, v | val);
+ t3_read_reg(adapter, addr); /* flush */
+}
+
+/**
+ * t3_read_indirect - read indirectly addressed registers
+ * @adap: the adapter
+ * @addr_reg: register holding the indirect address
+ * @data_reg: register holding the value of the indirect register
+ * @vals: where the read register values are stored
+ * @start_idx: index of first indirect register to read
+ * @nregs: how many indirect registers to read
+ *
+ * Reads registers that are accessed indirectly through an address/data
+ * register pair.
+ */
+void t3_read_indirect(struct adapter *adap, unsigned int addr_reg,
+ unsigned int data_reg, u32 *vals, unsigned int nregs,
+ unsigned int start_idx)
+{
+ while (nregs--) {
+ t3_write_reg(adap, addr_reg, start_idx);
+ *vals++ = t3_read_reg(adap, data_reg);
+ start_idx++;
+ }
+}
+
+/**
+ * t3_mc7_bd_read - read from MC7 through backdoor accesses
+ * @mc7: identifies MC7 to read from
+ * @start: index of first 64-bit word to read
+ * @n: number of 64-bit words to read
+ * @buf: where to store the read result
+ *
+ * Read n 64-bit words from MC7 starting at word start, using backdoor
+ * accesses.
+ */
+int t3_mc7_bd_read(struct mc7 *mc7, unsigned int start, unsigned int n,
+ u64 *buf)
+{
+ static const int shift[] = { 0, 0, 16, 24 };
+ static const int step[] = { 0, 32, 16, 8 };
+
+ unsigned int size64 = mc7->size / 8; /* # of 64-bit words */
+ struct adapter *adap = mc7->adapter;
+
+ if (start >= size64 || start + n > size64)
+ return -EINVAL;
+
+ start *= (8 << mc7->width);
+ while (n--) {
+ int i;
+ u64 val64 = 0;
+
+ for (i = (1 << mc7->width) - 1; i >= 0; --i) {
+ int attempts = 10;
+ u32 val;
+
+ t3_write_reg(adap, mc7->offset + A_MC7_BD_ADDR, start);
+ t3_write_reg(adap, mc7->offset + A_MC7_BD_OP, 0);
+ val = t3_read_reg(adap, mc7->offset + A_MC7_BD_OP);
+ while ((val & F_BUSY) && attempts--)
+ val = t3_read_reg(adap,
+ mc7->offset + A_MC7_BD_OP);
+ if (val & F_BUSY)
+ return -EIO;
+
+ val = t3_read_reg(adap, mc7->offset + A_MC7_BD_DATA1);
+ if (mc7->width == 0) {
+ val64 = t3_read_reg(adap,
+ mc7->offset +
+ A_MC7_BD_DATA0);
+ val64 |= (u64) val << 32;
+ } else {
+ if (mc7->width > 1)
+ val >>= shift[mc7->width];
+ val64 |= (u64) val << (step[mc7->width] * i);
+ }
+ start += 8;
+ }
+ *buf++ = val64;
+ }
+ return 0;
+}
+
+/*
+ * Initialize MI1.
+ */
+static void mi1_init(struct adapter *adap, const struct adapter_info *ai)
+{
+ u32 clkdiv = adap->params.vpd.cclk / (2 * adap->params.vpd.mdc) - 1;
+ u32 val = F_PREEN | V_MDIINV(ai->mdiinv) | V_MDIEN(ai->mdien) |
+ V_CLKDIV(clkdiv);
+
+ if (!(ai->caps & SUPPORTED_10000baseT_Full))
+ val |= V_ST(1);
+ t3_write_reg(adap, A_MI1_CFG, val);
+}
+
+#define MDIO_ATTEMPTS 10
+
+/*
+ * MI1 read/write operations for direct-addressed PHYs.
+ */
+static int mi1_read(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
+{
+ int ret;
+ u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
+
+ if (mmd_addr)
+ return -EINVAL;
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(2));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_MI1_DATA);
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static int mi1_write(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val)
+{
+ int ret;
+ u32 addr = V_REGADDR(reg_addr) | V_PHYADDR(phy_addr);
+
+ if (mmd_addr)
+ return -EINVAL;
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, val);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static const struct mdio_ops mi1_mdio_ops = {
+ mi1_read,
+ mi1_write
+};
+
+/*
+ * MI1 read/write operations for indirect-addressed PHYs.
+ */
+static int mi1_ext_read(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int *valp)
+{
+ int ret;
+ u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, reg_addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret) {
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(3));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
+ MDIO_ATTEMPTS, 20);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_MI1_DATA);
+ }
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static int mi1_ext_write(struct adapter *adapter, int phy_addr, int mmd_addr,
+ int reg_addr, unsigned int val)
+{
+ int ret;
+ u32 addr = V_REGADDR(mmd_addr) | V_PHYADDR(phy_addr);
+
+ mutex_lock(&adapter->mdio_lock);
+ t3_write_reg(adapter, A_MI1_ADDR, addr);
+ t3_write_reg(adapter, A_MI1_DATA, reg_addr);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(0));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0, MDIO_ATTEMPTS, 20);
+ if (!ret) {
+ t3_write_reg(adapter, A_MI1_DATA, val);
+ t3_write_reg(adapter, A_MI1_OP, V_MDI_OP(1));
+ ret = t3_wait_op_done(adapter, A_MI1_OP, F_BUSY, 0,
+ MDIO_ATTEMPTS, 20);
+ }
+ mutex_unlock(&adapter->mdio_lock);
+ return ret;
+}
+
+static const struct mdio_ops mi1_mdio_ext_ops = {
+ mi1_ext_read,
+ mi1_ext_write
+};
+
+/**
+ * t3_mdio_change_bits - modify the value of a PHY register
+ * @phy: the PHY to operate on
+ * @mmd: the device address
+ * @reg: the register address
+ * @clear: what part of the register value to mask off
+ * @set: what part of the register value to set
+ *
+ * Changes the value of a PHY register by applying a mask to its current
+ * value and ORing the result with a new value.
+ */
+int t3_mdio_change_bits(struct cphy *phy, int mmd, int reg, unsigned int clear,
+ unsigned int set)
+{
+ int ret;
+ unsigned int val;
+
+ ret = mdio_read(phy, mmd, reg, &val);
+ if (!ret) {
+ val &= ~clear;
+ ret = mdio_write(phy, mmd, reg, val | set);
+ }
+ return ret;
+}
+
+/**
+ * t3_phy_reset - reset a PHY block
+ * @phy: the PHY to operate on
+ * @mmd: the device address of the PHY block to reset
+ * @wait: how long to wait for the reset to complete in 1ms increments
+ *
+ * Resets a PHY block and optionally waits for the reset to complete.
+ * @mmd should be 0 for 10/100/1000 PHYs and the device address to reset
+ * for 10G PHYs.
+ */
+int t3_phy_reset(struct cphy *phy, int mmd, int wait)
+{
+ int err;
+ unsigned int ctl;
+
+ err = t3_mdio_change_bits(phy, mmd, MII_BMCR, BMCR_PDOWN, BMCR_RESET);
+ if (err || !wait)
+ return err;
+
+ do {
+ err = mdio_read(phy, mmd, MII_BMCR, &ctl);
+ if (err)
+ return err;
+ ctl &= BMCR_RESET;
+ if (ctl)
+ msleep(1);
+ } while (ctl && --wait);
+
+ return ctl ? -1 : 0;
+}
+
+/**
+ * t3_phy_advertise - set the PHY advertisement registers for autoneg
+ * @phy: the PHY to operate on
+ * @advert: bitmap of capabilities the PHY should advertise
+ *
+ * Sets a 10/100/1000 PHY's advertisement registers to advertise the
+ * requested capabilities.
+ */
+int t3_phy_advertise(struct cphy *phy, unsigned int advert)
+{
+ int err;
+ unsigned int val = 0;
+
+ err = mdio_read(phy, 0, MII_CTRL1000, &val);
+ if (err)
+ return err;
+
+ val &= ~(ADVERTISE_1000HALF | ADVERTISE_1000FULL);
+ if (advert & ADVERTISED_1000baseT_Half)
+ val |= ADVERTISE_1000HALF;
+ if (advert & ADVERTISED_1000baseT_Full)
+ val |= ADVERTISE_1000FULL;
+
+ err = mdio_write(phy, 0, MII_CTRL1000, val);
+ if (err)
+ return err;
+
+ val = 1;
+ if (advert & ADVERTISED_10baseT_Half)
+ val |= ADVERTISE_10HALF;
+ if (advert & ADVERTISED_10baseT_Full)
+ val |= ADVERTISE_10FULL;
+ if (advert & ADVERTISED_100baseT_Half)
+ val |= ADVERTISE_100HALF;
+ if (advert & ADVERTISED_100baseT_Full)
+ val |= ADVERTISE_100FULL;
+ if (advert & ADVERTISED_Pause)
+ val |= ADVERTISE_PAUSE_CAP;
+ if (advert & ADVERTISED_Asym_Pause)
+ val |= ADVERTISE_PAUSE_ASYM;
+ return mdio_write(phy, 0, MII_ADVERTISE, val);
+}
+
+/**
+ * t3_set_phy_speed_duplex - force PHY speed and duplex
+ * @phy: the PHY to operate on
+ * @speed: requested PHY speed
+ * @duplex: requested PHY duplex
+ *
+ * Force a 10/100/1000 PHY's speed and duplex. This also disables
+ * auto-negotiation except for GigE, where auto-negotiation is mandatory.
+ */
+int t3_set_phy_speed_duplex(struct cphy *phy, int speed, int duplex)
+{
+ int err;
+ unsigned int ctl;
+
+ err = mdio_read(phy, 0, MII_BMCR, &ctl);
+ if (err)
+ return err;
+
+ if (speed >= 0) {
+ ctl &= ~(BMCR_SPEED100 | BMCR_SPEED1000 | BMCR_ANENABLE);
+ if (speed == SPEED_100)
+ ctl |= BMCR_SPEED100;
+ else if (speed == SPEED_1000)
+ ctl |= BMCR_SPEED1000;
+ }
+ if (duplex >= 0) {
+ ctl &= ~(BMCR_FULLDPLX | BMCR_ANENABLE);
+ if (duplex == DUPLEX_FULL)
+ ctl |= BMCR_FULLDPLX;
+ }
+ if (ctl & BMCR_SPEED1000) /* auto-negotiation required for GigE */
+ ctl |= BMCR_ANENABLE;
+ return mdio_write(phy, 0, MII_BMCR, ctl);
+}
+
+static const struct adapter_info t3_adap_info[] = {
+ {2, 0, 0, 0,
+ F_GPIO2_OEN | F_GPIO4_OEN |
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
+ SUPPORTED_OFFLOAD,
+ &mi1_mdio_ops, "Chelsio PE9000"},
+ {2, 0, 0, 0,
+ F_GPIO2_OEN | F_GPIO4_OEN |
+ F_GPIO2_OUT_VAL | F_GPIO4_OUT_VAL, F_GPIO3 | F_GPIO5,
+ SUPPORTED_OFFLOAD,
+ &mi1_mdio_ops, "Chelsio T302"},
+ {1, 0, 0, 0,
+ F_GPIO1_OEN | F_GPIO6_OEN | F_GPIO7_OEN | F_GPIO10_OEN |
+ F_GPIO1_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ &mi1_mdio_ext_ops, "Chelsio T310"},
+ {2, 0, 0, 0,
+ F_GPIO1_OEN | F_GPIO2_OEN | F_GPIO4_OEN | F_GPIO5_OEN | F_GPIO6_OEN |
+ F_GPIO7_OEN | F_GPIO10_OEN | F_GPIO11_OEN | F_GPIO1_OUT_VAL |
+ F_GPIO5_OUT_VAL | F_GPIO6_OUT_VAL | F_GPIO10_OUT_VAL, 0,
+ SUPPORTED_10000baseT_Full | SUPPORTED_AUI | SUPPORTED_OFFLOAD,
+ &mi1_mdio_ext_ops, "Chelsio T320"},
+};
+
+/*
+ * Return the adapter_info structure with a given index. Out-of-range indices
+ * return NULL.
+ */
+const struct adapter_info *t3_get_adapter_info(unsigned int id)
+{
+ return id < ARRAY_SIZE(t3_adap_info) ? &t3_adap_info[id] : NULL;
+}
+
+#define CAPS_1G (SUPPORTED_10baseT_Full | SUPPORTED_100baseT_Full | \
+ SUPPORTED_1000baseT_Full | SUPPORTED_Autoneg | SUPPORTED_MII)
+#define CAPS_10G (SUPPORTED_10000baseT_Full | SUPPORTED_AUI)
+
+static const struct port_type_info port_types[] = {
+ {NULL},
+ {t3_ael1002_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
+ "10GBASE-XR"},
+ {t3_vsc8211_phy_prep, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
+ "10/100/1000BASE-T"},
+ {NULL, CAPS_1G | SUPPORTED_TP | SUPPORTED_IRQ,
+ "10/100/1000BASE-T"},
+ {t3_xaui_direct_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+ {NULL, CAPS_10G, "10GBASE-KX4"},
+ {t3_qt2045_phy_prep, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+ {t3_ael1006_phy_prep, CAPS_10G | SUPPORTED_FIBRE,
+ "10GBASE-SR"},
+ {NULL, CAPS_10G | SUPPORTED_TP, "10GBASE-CX4"},
+};
+
+#undef CAPS_1G
+#undef CAPS_10G
+
+#define VPD_ENTRY(name, len) \
+ u8 name##_kword[2]; u8 name##_len; u8 name##_data[len]
+
+/*
+ * Partial EEPROM Vital Product Data structure. Includes only the ID and
+ * VPD-R sections.
+ */
+struct t3_vpd {
+ u8 id_tag;
+ u8 id_len[2];
+ u8 id_data[16];
+ u8 vpdr_tag;
+ u8 vpdr_len[2];
+ VPD_ENTRY(pn, 16); /* part number */
+ VPD_ENTRY(ec, 16); /* EC level */
+ VPD_ENTRY(sn, 16); /* serial number */
+ VPD_ENTRY(na, 12); /* MAC address base */
+ VPD_ENTRY(cclk, 6); /* core clock */
+ VPD_ENTRY(mclk, 6); /* mem clock */
+ VPD_ENTRY(uclk, 6); /* uP clk */
+ VPD_ENTRY(mdc, 6); /* MDIO clk */
+ VPD_ENTRY(mt, 2); /* mem timing */
+ VPD_ENTRY(xaui0cfg, 6); /* XAUI0 config */
+ VPD_ENTRY(xaui1cfg, 6); /* XAUI1 config */
+ VPD_ENTRY(port0, 2); /* PHY0 complex */
+ VPD_ENTRY(port1, 2); /* PHY1 complex */
+ VPD_ENTRY(port2, 2); /* PHY2 complex */
+ VPD_ENTRY(port3, 2); /* PHY3 complex */
+ VPD_ENTRY(rv, 1); /* csum */
+ u32 pad; /* for multiple-of-4 sizing and alignment */
+};
+
+#define EEPROM_MAX_POLL 4
+#define EEPROM_STAT_ADDR 0x4000
+#define VPD_BASE 0xc00
+
+/**
+ * t3_seeprom_read - read a VPD EEPROM location
+ * @adapter: adapter to read
+ * @addr: EEPROM address
+ * @data: where to store the read data
+ *
+ * Read a 32-bit word from a location in VPD EEPROM using the card's PCI
+ * VPD ROM capability. A zero is written to the flag bit when the
+ * addres is written to the control register. The hardware device will
+ * set the flag to 1 when 4 bytes have been read into the data register.
+ */
+int t3_seeprom_read(struct adapter *adapter, u32 addr, u32 *data)
+{
+ u16 val;
+ int attempts = EEPROM_MAX_POLL;
+ unsigned int base = adapter->params.pci.vpd_cap_addr;
+
+ if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_word(adapter->pdev, base + PCI_VPD_ADDR, addr);
+ do {
+ udelay(10);
+ pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
+ } while (!(val & PCI_VPD_ADDR_F) && --attempts);
+
+ if (!(val & PCI_VPD_ADDR_F)) {
+ CH_ERR(adapter, "reading EEPROM address 0x%x failed\n", addr);
+ return -EIO;
+ }
+ pci_read_config_dword(adapter->pdev, base + PCI_VPD_DATA, data);
+ *data = le32_to_cpu(*data);
+ return 0;
+}
+
+/**
+ * t3_seeprom_write - write a VPD EEPROM location
+ * @adapter: adapter to write
+ * @addr: EEPROM address
+ * @data: value to write
+ *
+ * Write a 32-bit word to a location in VPD EEPROM using the card's PCI
+ * VPD ROM capability.
+ */
+int t3_seeprom_write(struct adapter *adapter, u32 addr, u32 data)
+{
+ u16 val;
+ int attempts = EEPROM_MAX_POLL;
+ unsigned int base = adapter->params.pci.vpd_cap_addr;
+
+ if ((addr >= EEPROMSIZE && addr != EEPROM_STAT_ADDR) || (addr & 3))
+ return -EINVAL;
+
+ pci_write_config_dword(adapter->pdev, base + PCI_VPD_DATA,
+ cpu_to_le32(data));
+ pci_write_config_word(adapter->pdev,base + PCI_VPD_ADDR,
+ addr | PCI_VPD_ADDR_F);
+ do {
+ msleep(1);
+ pci_read_config_word(adapter->pdev, base + PCI_VPD_ADDR, &val);
+ } while ((val & PCI_VPD_ADDR_F) && --attempts);
+
+ if (val & PCI_VPD_ADDR_F) {
+ CH_ERR(adapter, "write to EEPROM address 0x%x failed\n", addr);
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ * t3_seeprom_wp - enable/disable EEPROM write protection
+ * @adapter: the adapter
+ * @enable: 1 to enable write protection, 0 to disable it
+ *
+ * Enables or disables write protection on the serial EEPROM.
+ */
+int t3_seeprom_wp(struct adapter *adapter, int enable)
+{
+ return t3_seeprom_write(adapter, EEPROM_STAT_ADDR, enable ? 0xc : 0);
+}
+
+/*
+ * Convert a character holding a hex digit to a number.
+ */
+static unsigned int hex2int(unsigned char c)
+{
+ return isdigit(c) ? c - '0' : toupper(c) - 'A' + 10;
+}
+
+/**
+ * get_vpd_params - read VPD parameters from VPD EEPROM
+ * @adapter: adapter to read
+ * @p: where to store the parameters
+ *
+ * Reads card parameters stored in VPD EEPROM.
+ */
+static int get_vpd_params(struct adapter *adapter, struct vpd_params *p)
+{
+ int i, addr, ret;
+ struct t3_vpd vpd;
+
+ /*
+ * Card information is normally at VPD_BASE but some early cards had
+ * it at 0.
+ */
+ ret = t3_seeprom_read(adapter, VPD_BASE, (u32 *)&vpd);
+ if (ret)
+ return ret;
+ addr = vpd.id_tag == 0x82 ? VPD_BASE : 0;
+
+ for (i = 0; i < sizeof(vpd); i += 4) {
+ ret = t3_seeprom_read(adapter, addr + i,
+ (u32 *)((u8 *)&vpd + i));
+ if (ret)
+ return ret;
+ }
+
+ p->cclk = simple_strtoul(vpd.cclk_data, NULL, 10);
+ p->mclk = simple_strtoul(vpd.mclk_data, NULL, 10);
+ p->uclk = simple_strtoul(vpd.uclk_data, NULL, 10);
+ p->mdc = simple_strtoul(vpd.mdc_data, NULL, 10);
+ p->mem_timing = simple_strtoul(vpd.mt_data, NULL, 10);
+
+ /* Old eeproms didn't have port information */
+ if (adapter->params.rev == 0 && !vpd.port0_data[0]) {
+ p->port_type[0] = uses_xaui(adapter) ? 1 : 2;
+ p->port_type[1] = uses_xaui(adapter) ? 6 : 2;
+ } else {
+ p->port_type[0] = hex2int(vpd.port0_data[0]);
+ p->port_type[1] = hex2int(vpd.port1_data[0]);
+ p->xauicfg[0] = simple_strtoul(vpd.xaui0cfg_data, NULL, 16);
+ p->xauicfg[1] = simple_strtoul(vpd.xaui1cfg_data, NULL, 16);
+ }
+
+ for (i = 0; i < 6; i++)
+ p->eth_base[i] = hex2int(vpd.na_data[2 * i]) * 16 +
+ hex2int(vpd.na_data[2 * i + 1]);
+ return 0;
+}
+
+/* serial flash and firmware constants */
+enum {
+ SF_ATTEMPTS = 5, /* max retries for SF1 operations */
+ SF_SEC_SIZE = 64 * 1024, /* serial flash sector size */
+ SF_SIZE = SF_SEC_SIZE * 8, /* serial flash size */
+
+ /* flash command opcodes */
+ SF_PROG_PAGE = 2, /* program page */
+ SF_WR_DISABLE = 4, /* disable writes */
+ SF_RD_STATUS = 5, /* read status register */
+ SF_WR_ENABLE = 6, /* enable writes */
+ SF_RD_DATA_FAST = 0xb, /* read flash */
+ SF_ERASE_SECTOR = 0xd8, /* erase sector */
+
+ FW_FLASH_BOOT_ADDR = 0x70000, /* start address of FW in flash */
+ FW_VERS_ADDR = 0x77ffc /* flash address holding FW version */
+};
+
+/**
+ * sf1_read - read data from the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to read
+ * @cont: whether another operation will be chained
+ * @valp: where to store the read data
+ *
+ * Reads up to 4 bytes of data from the serial flash. The location of
+ * the read needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ u32 *valp)
+{
+ int ret;
+
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t3_write_reg(adapter, A_SF_OP, V_CONT(cont) | V_BYTECNT(byte_cnt - 1));
+ ret = t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10);
+ if (!ret)
+ *valp = t3_read_reg(adapter, A_SF_DATA);
+ return ret;
+}
+
+/**
+ * sf1_write - write data to the serial flash
+ * @adapter: the adapter
+ * @byte_cnt: number of bytes to write
+ * @cont: whether another operation will be chained
+ * @val: value to write
+ *
+ * Writes up to 4 bytes of data to the serial flash. The location of
+ * the write needs to be specified prior to calling this by issuing the
+ * appropriate commands to the serial flash.
+ */
+static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
+ u32 val)
+{
+ if (!byte_cnt || byte_cnt > 4)
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SF_OP) & F_BUSY)
+ return -EBUSY;
+ t3_write_reg(adapter, A_SF_DATA, val);
+ t3_write_reg(adapter, A_SF_OP,
+ V_CONT(cont) | V_BYTECNT(byte_cnt - 1) | V_OP(1));
+ return t3_wait_op_done(adapter, A_SF_OP, F_BUSY, 0, SF_ATTEMPTS, 10);
+}
+
+/**
+ * flash_wait_op - wait for a flash operation to complete
+ * @adapter: the adapter
+ * @attempts: max number of polls of the status register
+ * @delay: delay between polls in ms
+ *
+ * Wait for a flash operation to complete by polling the status register.
+ */
+static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
+{
+ int ret;
+ u32 status;
+
+ while (1) {
+ if ((ret = sf1_write(adapter, 1, 1, SF_RD_STATUS)) != 0 ||
+ (ret = sf1_read(adapter, 1, 0, &status)) != 0)
+ return ret;
+ if (!(status & 1))
+ return 0;
+ if (--attempts == 0)
+ return -EAGAIN;
+ if (delay)
+ msleep(delay);
+ }
+}
+
+/**
+ * t3_read_flash - read words from serial flash
+ * @adapter: the adapter
+ * @addr: the start address for the read
+ * @nwords: how many 32-bit words to read
+ * @data: where to store the read data
+ * @byte_oriented: whether to store data as bytes or as words
+ *
+ * Read the specified number of 32-bit words from the serial flash.
+ * If @byte_oriented is set the read data is stored as a byte array
+ * (i.e., big-endian), otherwise as 32-bit words in the platform's
+ * natural endianess.
+ */
+int t3_read_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int nwords, u32 *data, int byte_oriented)
+{
+ int ret;
+
+ if (addr + nwords * sizeof(u32) > SF_SIZE || (addr & 3))
+ return -EINVAL;
+
+ addr = swab32(addr) | SF_RD_DATA_FAST;
+
+ if ((ret = sf1_write(adapter, 4, 1, addr)) != 0 ||
+ (ret = sf1_read(adapter, 1, 1, data)) != 0)
+ return ret;
+
+ for (; nwords; nwords--, data++) {
+ ret = sf1_read(adapter, 4, nwords > 1, data);
+ if (ret)
+ return ret;
+ if (byte_oriented)
+ *data = htonl(*data);
+ }
+ return 0;
+}
+
+/**
+ * t3_write_flash - write up to a page of data to the serial flash
+ * @adapter: the adapter
+ * @addr: the start address to write
+ * @n: length of data to write
+ * @data: the data to write
+ *
+ * Writes up to a page of data (256 bytes) to the serial flash starting
+ * at the given address.
+ */
+static int t3_write_flash(struct adapter *adapter, unsigned int addr,
+ unsigned int n, const u8 *data)
+{
+ int ret;
+ u32 buf[64];
+ unsigned int i, c, left, val, offset = addr & 0xff;
+
+ if (addr + n > SF_SIZE || offset + n > 256)
+ return -EINVAL;
+
+ val = swab32(addr) | SF_PROG_PAGE;
+
+ if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 1, val)) != 0)
+ return ret;
+
+ for (left = n; left; left -= c) {
+ c = min(left, 4U);
+ for (val = 0, i = 0; i < c; ++i)
+ val = (val << 8) + *data++;
+
+ ret = sf1_write(adapter, c, c != left, val);
+ if (ret)
+ return ret;
+ }
+ if ((ret = flash_wait_op(adapter, 5, 1)) != 0)
+ return ret;
+
+ /* Read the page to verify the write succeeded */
+ ret = t3_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf, 1);
+ if (ret)
+ return ret;
+
+ if (memcmp(data - n, (u8 *) buf + offset, n))
+ return -EIO;
+ return 0;
+}
+
+enum fw_version_type {
+ FW_VERSION_N3,
+ FW_VERSION_T3
+};
+
+/**
+ * t3_get_fw_version - read the firmware version
+ * @adapter: the adapter
+ * @vers: where to place the version
+ *
+ * Reads the FW version from flash.
+ */
+int t3_get_fw_version(struct adapter *adapter, u32 *vers)
+{
+ return t3_read_flash(adapter, FW_VERS_ADDR, 1, vers, 0);
+}
+
+/**
+ * t3_check_fw_version - check if the FW is compatible with this driver
+ * @adapter: the adapter
+ *
+ * Checks if an adapter's FW is compatible with the driver. Returns 0
+ * if the versions are compatible, a negative error otherwise.
+ */
+int t3_check_fw_version(struct adapter *adapter)
+{
+ int ret;
+ u32 vers;
+ unsigned int type, major, minor;
+
+ ret = t3_get_fw_version(adapter, &vers);
+ if (ret)
+ return ret;
+
+ type = G_FW_VERSION_TYPE(vers);
+ major = G_FW_VERSION_MAJOR(vers);
+ minor = G_FW_VERSION_MINOR(vers);
+
+ if (type == FW_VERSION_T3 && major == 3 && minor == 1)
+ return 0;
+
+ CH_ERR(adapter, "found wrong FW version(%u.%u), "
+ "driver needs version 3.1\n", major, minor);
+ return -EINVAL;
+}
+
+/**
+ * t3_flash_erase_sectors - erase a range of flash sectors
+ * @adapter: the adapter
+ * @start: the first sector to erase
+ * @end: the last sector to erase
+ *
+ * Erases the sectors in the given range.
+ */
+static int t3_flash_erase_sectors(struct adapter *adapter, int start, int end)
+{
+ while (start <= end) {
+ int ret;
+
+ if ((ret = sf1_write(adapter, 1, 0, SF_WR_ENABLE)) != 0 ||
+ (ret = sf1_write(adapter, 4, 0,
+ SF_ERASE_SECTOR | (start << 8))) != 0 ||
+ (ret = flash_wait_op(adapter, 5, 500)) != 0)
+ return ret;
+ start++;
+ }
+ return 0;
+}
+
+/*
+ * t3_load_fw - download firmware
+ * @adapter: the adapter
+ * @fw_data: the firrware image to write
+ * @size: image size
+ *
+ * Write the supplied firmware image to the card's serial flash.
+ * The FW image has the following sections: @size - 8 bytes of code and
+ * data, followed by 4 bytes of FW version, followed by the 32-bit
+ * 1's complement checksum of the whole image.
+ */
+int t3_load_fw(struct adapter *adapter, const u8 *fw_data, unsigned int size)
+{
+ u32 csum;
+ unsigned int i;
+ const u32 *p = (const u32 *)fw_data;
+ int ret, addr, fw_sector = FW_FLASH_BOOT_ADDR >> 16;
+
+ if (size & 3)
+ return -EINVAL;
+ if (size > FW_VERS_ADDR + 8 - FW_FLASH_BOOT_ADDR)
+ return -EFBIG;
+
+ for (csum = 0, i = 0; i < size / sizeof(csum); i++)
+ csum += ntohl(p[i]);
+ if (csum != 0xffffffff) {
+ CH_ERR(adapter, "corrupted firmware image, checksum %u\n",
+ csum);
+ return -EINVAL;
+ }
+
+ ret = t3_flash_erase_sectors(adapter, fw_sector, fw_sector);
+ if (ret)
+ goto out;
+
+ size -= 8; /* trim off version and checksum */
+ for (addr = FW_FLASH_BOOT_ADDR; size;) {
+ unsigned int chunk_size = min(size, 256U);
+
+ ret = t3_write_flash(adapter, addr, chunk_size, fw_data);
+ if (ret)
+ goto out;
+
+ addr += chunk_size;
+ fw_data += chunk_size;
+ size -= chunk_size;
+ }
+
+ ret = t3_write_flash(adapter, FW_VERS_ADDR, 4, fw_data);
+out:
+ if (ret)
+ CH_ERR(adapter, "firmware download failed, error %d\n", ret);
+ return ret;
+}
+
+#define CIM_CTL_BASE 0x2000
+
+/**
+ * t3_cim_ctl_blk_read - read a block from CIM control region
+ *
+ * @adap: the adapter
+ * @addr: the start address within the CIM control region
+ * @n: number of words to read
+ * @valp: where to store the result
+ *
+ * Reads a block of 4-byte words from the CIM control region.
+ */
+int t3_cim_ctl_blk_read(struct adapter *adap, unsigned int addr,
+ unsigned int n, unsigned int *valp)
+{
+ int ret = 0;
+
+ if (t3_read_reg(adap, A_CIM_HOST_ACC_CTRL) & F_HOSTBUSY)
+ return -EBUSY;
+
+ for ( ; !ret && n--; addr += 4) {
+ t3_write_reg(adap, A_CIM_HOST_ACC_CTRL, CIM_CTL_BASE + addr);
+ ret = t3_wait_op_done(adap, A_CIM_HOST_ACC_CTRL, F_HOSTBUSY,
+ 0, 5, 2);
+ if (!ret)
+ *valp++ = t3_read_reg(adap, A_CIM_HOST_ACC_DATA);
+ }
+ return ret;
+}
+
+
+/**
+ * t3_link_changed - handle interface link changes
+ * @adapter: the adapter
+ * @port_id: the port index that changed link state
+ *
+ * Called when a port's link settings change to propagate the new values
+ * to the associated PHY and MAC. After performing the common tasks it
+ * invokes an OS-specific handler.
+ */
+void t3_link_changed(struct adapter *adapter, int port_id)
+{
+ int link_ok, speed, duplex, fc;
+ struct port_info *pi = adap2pinfo(adapter, port_id);
+ struct cphy *phy = &pi->phy;
+ struct cmac *mac = &pi->mac;
+ struct link_config *lc = &pi->link_config;
+
+ phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
+
+ if (link_ok != lc->link_ok && adapter->params.rev > 0 &&
+ uses_xaui(adapter)) {
+ if (link_ok)
+ t3b_pcs_reset(mac);
+ t3_write_reg(adapter, A_XGM_XAUI_ACT_CTRL + mac->offset,
+ link_ok ? F_TXACTENABLE | F_RXEN : 0);
+ }
+ lc->link_ok = link_ok;
+ lc->speed = speed < 0 ? SPEED_INVALID : speed;
+ lc->duplex = duplex < 0 ? DUPLEX_INVALID : duplex;
+ if (lc->requested_fc & PAUSE_AUTONEG)
+ fc &= lc->requested_fc;
+ else
+ fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ if (link_ok && speed >= 0 && lc->autoneg == AUTONEG_ENABLE) {
+ /* Set MAC speed, duplex, and flow control to match PHY. */
+ t3_mac_set_speed_duplex_fc(mac, speed, duplex, fc);
+ lc->fc = fc;
+ }
+
+ t3_os_link_changed(adapter, port_id, link_ok, speed, duplex, fc);
+}
+
+/**
+ * t3_link_start - apply link configuration to MAC/PHY
+ * @phy: the PHY to setup
+ * @mac: the MAC to setup
+ * @lc: the requested link configuration
+ *
+ * Set up a port's MAC and PHY according to a desired link configuration.
+ * - If the PHY can auto-negotiate first decide what to advertise, then
+ * enable/disable auto-negotiation as desired, and reset.
+ * - If the PHY does not auto-negotiate just reset it.
+ * - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
+ * otherwise do it later based on the outcome of auto-negotiation.
+ */
+int t3_link_start(struct cphy *phy, struct cmac *mac, struct link_config *lc)
+{
+ unsigned int fc = lc->requested_fc & (PAUSE_RX | PAUSE_TX);
+
+ lc->link_ok = 0;
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising &= ~(ADVERTISED_Asym_Pause | ADVERTISED_Pause);
+ if (fc) {
+ lc->advertising |= ADVERTISED_Asym_Pause;
+ if (fc & PAUSE_RX)
+ lc->advertising |= ADVERTISED_Pause;
+ }
+ phy->ops->advertise(phy, lc->advertising);
+
+ if (lc->autoneg == AUTONEG_DISABLE) {
+ lc->speed = lc->requested_speed;
+ lc->duplex = lc->requested_duplex;
+ lc->fc = (unsigned char)fc;
+ t3_mac_set_speed_duplex_fc(mac, lc->speed, lc->duplex,
+ fc);
+ /* Also disables autoneg */
+ phy->ops->set_speed_duplex(phy, lc->speed, lc->duplex);
+ phy->ops->reset(phy, 0);
+ } else
+ phy->ops->autoneg_enable(phy);
+ } else {
+ t3_mac_set_speed_duplex_fc(mac, -1, -1, fc);
+ lc->fc = (unsigned char)fc;
+ phy->ops->reset(phy, 0);
+ }
+ return 0;
+}
+
+/**
+ * t3_set_vlan_accel - control HW VLAN extraction
+ * @adapter: the adapter
+ * @ports: bitmap of adapter ports to operate on
+ * @on: enable (1) or disable (0) HW VLAN extraction
+ *
+ * Enables or disables HW extraction of VLAN tags for the given port.
+ */
+void t3_set_vlan_accel(struct adapter *adapter, unsigned int ports, int on)
+{
+ t3_set_reg_field(adapter, A_TP_OUT_CONFIG,
+ ports << S_VLANEXTRACTIONENABLE,
+ on ? (ports << S_VLANEXTRACTIONENABLE) : 0);
+}
+
+struct intr_info {
+ unsigned int mask; /* bits to check in interrupt status */
+ const char *msg; /* message to print or NULL */
+ short stat_idx; /* stat counter to increment or -1 */
+ unsigned short fatal:1; /* whether the condition reported is fatal */
+};
+
+/**
+ * t3_handle_intr_status - table driven interrupt handler
+ * @adapter: the adapter that generated the interrupt
+ * @reg: the interrupt status register to process
+ * @mask: a mask to apply to the interrupt status
+ * @acts: table of interrupt actions
+ * @stats: statistics counters tracking interrupt occurences
+ *
+ * A table driven interrupt handler that applies a set of masks to an
+ * interrupt status word and performs the corresponding actions if the
+ * interrupts described by the mask have occured. The actions include
+ * optionally printing a warning or alert message, and optionally
+ * incrementing a stat counter. The table is terminated by an entry
+ * specifying mask 0. Returns the number of fatal interrupt conditions.
+ */
+static int t3_handle_intr_status(struct adapter *adapter, unsigned int reg,
+ unsigned int mask,
+ const struct intr_info *acts,
+ unsigned long *stats)
+{
+ int fatal = 0;
+ unsigned int status = t3_read_reg(adapter, reg) & mask;
+
+ for (; acts->mask; ++acts) {
+ if (!(status & acts->mask))
+ continue;
+ if (acts->fatal) {
+ fatal++;
+ CH_ALERT(adapter, "%s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ } else if (acts->msg)
+ CH_WARN(adapter, "%s (0x%x)\n",
+ acts->msg, status & acts->mask);
+ if (acts->stat_idx >= 0)
+ stats[acts->stat_idx]++;
+ }
+ if (status) /* clear processed interrupts */
+ t3_write_reg(adapter, reg, status);
+ return fatal;
+}
+
+#define SGE_INTR_MASK (F_RSPQDISABLED)
+#define MC5_INTR_MASK (F_PARITYERR | F_ACTRGNFULL | F_UNKNOWNCMD | \
+ F_REQQPARERR | F_DISPQPARERR | F_DELACTEMPTY | \
+ F_NFASRCHFAIL)
+#define MC7_INTR_MASK (F_AE | F_UE | F_CE | V_PE(M_PE))
+#define XGM_INTR_MASK (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \
+ V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR) | \
+ F_TXFIFO_UNDERRUN | F_RXFIFO_OVERFLOW)
+#define PCIX_INTR_MASK (F_MSTDETPARERR | F_SIGTARABT | F_RCVTARABT | \
+ F_RCVMSTABT | F_SIGSYSERR | F_DETPARERR | \
+ F_SPLCMPDIS | F_UNXSPLCMP | F_RCVSPLCMPERR | \
+ F_DETCORECCERR | F_DETUNCECCERR | F_PIOPARERR | \
+ V_WFPARERR(M_WFPARERR) | V_RFPARERR(M_RFPARERR) | \
+ V_CFPARERR(M_CFPARERR) /* | V_MSIXPARERR(M_MSIXPARERR) */)
+#define PCIE_INTR_MASK (F_UNXSPLCPLERRR | F_UNXSPLCPLERRC | F_PCIE_PIOPARERR |\
+ F_PCIE_WFPARERR | F_PCIE_RFPARERR | F_PCIE_CFPARERR | \
+ /* V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR) | */ \
+ V_BISTERR(M_BISTERR) | F_PEXERR)
+#define ULPRX_INTR_MASK F_PARERR
+#define ULPTX_INTR_MASK 0
+#define CPLSW_INTR_MASK (F_TP_FRAMING_ERROR | \
+ F_SGE_FRAMING_ERROR | F_CIM_FRAMING_ERROR | \
+ F_ZERO_SWITCH_ERROR)
+#define CIM_INTR_MASK (F_BLKWRPLINT | F_BLKRDPLINT | F_BLKWRCTLINT | \
+ F_BLKRDCTLINT | F_BLKWRFLASHINT | F_BLKRDFLASHINT | \
+ F_SGLWRFLASHINT | F_WRBLKFLASHINT | F_BLKWRBOOTINT | \
+ F_FLASHRANGEINT | F_SDRAMRANGEINT | F_RSVDSPACEINT)
+#define PMTX_INTR_MASK (F_ZERO_C_CMD_ERROR | ICSPI_FRM_ERR | OESPI_FRM_ERR | \
+ V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR) | \
+ V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR))
+#define PMRX_INTR_MASK (F_ZERO_E_CMD_ERROR | IESPI_FRM_ERR | OCSPI_FRM_ERR | \
+ V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR) | \
+ V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR))
+#define MPS_INTR_MASK (V_TX0TPPARERRENB(M_TX0TPPARERRENB) | \
+ V_TX1TPPARERRENB(M_TX1TPPARERRENB) | \
+ V_RXTPPARERRENB(M_RXTPPARERRENB) | \
+ V_MCAPARERRENB(M_MCAPARERRENB))
+#define PL_INTR_MASK (F_T3DBG | F_XGMAC0_0 | F_XGMAC0_1 | F_MC5A | F_PM1_TX | \
+ F_PM1_RX | F_ULP2_TX | F_ULP2_RX | F_TP1 | F_CIM | \
+ F_MC7_CM | F_MC7_PMTX | F_MC7_PMRX | F_SGE3 | F_PCIM0 | \
+ F_MPS0 | F_CPL_SWITCH)
+
+/*
+ * Interrupt handler for the PCIX1 module.
+ */
+static void pci_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pcix1_intr_info[] = {
+ {F_MSTDETPARERR, "PCI master detected parity error", -1, 1},
+ {F_SIGTARABT, "PCI signaled target abort", -1, 1},
+ {F_RCVTARABT, "PCI received target abort", -1, 1},
+ {F_RCVMSTABT, "PCI received master abort", -1, 1},
+ {F_SIGSYSERR, "PCI signaled system error", -1, 1},
+ {F_DETPARERR, "PCI detected parity error", -1, 1},
+ {F_SPLCMPDIS, "PCI split completion discarded", -1, 1},
+ {F_UNXSPLCMP, "PCI unexpected split completion error", -1, 1},
+ {F_RCVSPLCMPERR, "PCI received split completion error", -1,
+ 1},
+ {F_DETCORECCERR, "PCI correctable ECC error",
+ STAT_PCI_CORR_ECC, 0},
+ {F_DETUNCECCERR, "PCI uncorrectable ECC error", -1, 1},
+ {F_PIOPARERR, "PCI PIO FIFO parity error", -1, 1},
+ {V_WFPARERR(M_WFPARERR), "PCI write FIFO parity error", -1,
+ 1},
+ {V_RFPARERR(M_RFPARERR), "PCI read FIFO parity error", -1,
+ 1},
+ {V_CFPARERR(M_CFPARERR), "PCI command FIFO parity error", -1,
+ 1},
+ {V_MSIXPARERR(M_MSIXPARERR), "PCI MSI-X table/PBA parity "
+ "error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PCIX_INT_CAUSE, PCIX_INTR_MASK,
+ pcix1_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * Interrupt handler for the PCIE module.
+ */
+static void pcie_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pcie_intr_info[] = {
+ {F_PEXERR, "PCI PEX error", -1, 1},
+ {F_UNXSPLCPLERRR,
+ "PCI unexpected split completion DMA read error", -1, 1},
+ {F_UNXSPLCPLERRC,
+ "PCI unexpected split completion DMA command error", -1, 1},
+ {F_PCIE_PIOPARERR, "PCI PIO FIFO parity error", -1, 1},
+ {F_PCIE_WFPARERR, "PCI write FIFO parity error", -1, 1},
+ {F_PCIE_RFPARERR, "PCI read FIFO parity error", -1, 1},
+ {F_PCIE_CFPARERR, "PCI command FIFO parity error", -1, 1},
+ {V_PCIE_MSIXPARERR(M_PCIE_MSIXPARERR),
+ "PCI MSI-X table/PBA parity error", -1, 1},
+ {V_BISTERR(M_BISTERR), "PCI BIST error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PCIE_INT_CAUSE, PCIE_INTR_MASK,
+ pcie_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * TP interrupt handler.
+ */
+static void tp_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info tp_intr_info[] = {
+ {0xffffff, "TP parity error", -1, 1},
+ {0x1000000, "TP out of Rx pages", -1, 1},
+ {0x2000000, "TP out of Tx pages", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_TP_INT_CAUSE, 0xffffffff,
+ tp_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * CIM interrupt handler.
+ */
+static void cim_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info cim_intr_info[] = {
+ {F_RSVDSPACEINT, "CIM reserved space write", -1, 1},
+ {F_SDRAMRANGEINT, "CIM SDRAM address out of range", -1, 1},
+ {F_FLASHRANGEINT, "CIM flash address out of range", -1, 1},
+ {F_BLKWRBOOTINT, "CIM block write to boot space", -1, 1},
+ {F_WRBLKFLASHINT, "CIM write to cached flash space", -1, 1},
+ {F_SGLWRFLASHINT, "CIM single write to flash space", -1, 1},
+ {F_BLKRDFLASHINT, "CIM block read from flash space", -1, 1},
+ {F_BLKWRFLASHINT, "CIM block write to flash space", -1, 1},
+ {F_BLKRDCTLINT, "CIM block read from CTL space", -1, 1},
+ {F_BLKWRCTLINT, "CIM block write to CTL space", -1, 1},
+ {F_BLKRDPLINT, "CIM block read from PL space", -1, 1},
+ {F_BLKWRPLINT, "CIM block write to PL space", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_CIM_HOST_INT_CAUSE, 0xffffffff,
+ cim_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * ULP RX interrupt handler.
+ */
+static void ulprx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info ulprx_intr_info[] = {
+ {F_PARERR, "ULP RX parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_ULPRX_INT_CAUSE, 0xffffffff,
+ ulprx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * ULP TX interrupt handler.
+ */
+static void ulptx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info ulptx_intr_info[] = {
+ {F_PBL_BOUND_ERR_CH0, "ULP TX channel 0 PBL out of bounds",
+ STAT_ULP_CH0_PBL_OOB, 0},
+ {F_PBL_BOUND_ERR_CH1, "ULP TX channel 1 PBL out of bounds",
+ STAT_ULP_CH1_PBL_OOB, 0},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_ULPTX_INT_CAUSE, 0xffffffff,
+ ulptx_intr_info, adapter->irq_stats))
+ t3_fatal_err(adapter);
+}
+
+#define ICSPI_FRM_ERR (F_ICSPI0_FIFO2X_RX_FRAMING_ERROR | \
+ F_ICSPI1_FIFO2X_RX_FRAMING_ERROR | F_ICSPI0_RX_FRAMING_ERROR | \
+ F_ICSPI1_RX_FRAMING_ERROR | F_ICSPI0_TX_FRAMING_ERROR | \
+ F_ICSPI1_TX_FRAMING_ERROR)
+#define OESPI_FRM_ERR (F_OESPI0_RX_FRAMING_ERROR | \
+ F_OESPI1_RX_FRAMING_ERROR | F_OESPI0_TX_FRAMING_ERROR | \
+ F_OESPI1_TX_FRAMING_ERROR | F_OESPI0_OFIFO2X_TX_FRAMING_ERROR | \
+ F_OESPI1_OFIFO2X_TX_FRAMING_ERROR)
+
+/*
+ * PM TX interrupt handler.
+ */
+static void pmtx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pmtx_intr_info[] = {
+ {F_ZERO_C_CMD_ERROR, "PMTX 0-length pcmd", -1, 1},
+ {ICSPI_FRM_ERR, "PMTX ispi framing error", -1, 1},
+ {OESPI_FRM_ERR, "PMTX ospi framing error", -1, 1},
+ {V_ICSPI_PAR_ERROR(M_ICSPI_PAR_ERROR),
+ "PMTX ispi parity error", -1, 1},
+ {V_OESPI_PAR_ERROR(M_OESPI_PAR_ERROR),
+ "PMTX ospi parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PM1_TX_INT_CAUSE, 0xffffffff,
+ pmtx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+#define IESPI_FRM_ERR (F_IESPI0_FIFO2X_RX_FRAMING_ERROR | \
+ F_IESPI1_FIFO2X_RX_FRAMING_ERROR | F_IESPI0_RX_FRAMING_ERROR | \
+ F_IESPI1_RX_FRAMING_ERROR | F_IESPI0_TX_FRAMING_ERROR | \
+ F_IESPI1_TX_FRAMING_ERROR)
+#define OCSPI_FRM_ERR (F_OCSPI0_RX_FRAMING_ERROR | \
+ F_OCSPI1_RX_FRAMING_ERROR | F_OCSPI0_TX_FRAMING_ERROR | \
+ F_OCSPI1_TX_FRAMING_ERROR | F_OCSPI0_OFIFO2X_TX_FRAMING_ERROR | \
+ F_OCSPI1_OFIFO2X_TX_FRAMING_ERROR)
+
+/*
+ * PM RX interrupt handler.
+ */
+static void pmrx_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info pmrx_intr_info[] = {
+ {F_ZERO_E_CMD_ERROR, "PMRX 0-length pcmd", -1, 1},
+ {IESPI_FRM_ERR, "PMRX ispi framing error", -1, 1},
+ {OCSPI_FRM_ERR, "PMRX ospi framing error", -1, 1},
+ {V_IESPI_PAR_ERROR(M_IESPI_PAR_ERROR),
+ "PMRX ispi parity error", -1, 1},
+ {V_OCSPI_PAR_ERROR(M_OCSPI_PAR_ERROR),
+ "PMRX ospi parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_PM1_RX_INT_CAUSE, 0xffffffff,
+ pmrx_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * CPL switch interrupt handler.
+ */
+static void cplsw_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info cplsw_intr_info[] = {
+/* { F_CIM_OVFL_ERROR, "CPL switch CIM overflow", -1, 1 }, */
+ {F_TP_FRAMING_ERROR, "CPL switch TP framing error", -1, 1},
+ {F_SGE_FRAMING_ERROR, "CPL switch SGE framing error", -1, 1},
+ {F_CIM_FRAMING_ERROR, "CPL switch CIM framing error", -1, 1},
+ {F_ZERO_SWITCH_ERROR, "CPL switch no-switch error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_CPL_INTR_CAUSE, 0xffffffff,
+ cplsw_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+/*
+ * MPS interrupt handler.
+ */
+static void mps_intr_handler(struct adapter *adapter)
+{
+ static const struct intr_info mps_intr_info[] = {
+ {0x1ff, "MPS parity error", -1, 1},
+ {0}
+ };
+
+ if (t3_handle_intr_status(adapter, A_MPS_INT_CAUSE, 0xffffffff,
+ mps_intr_info, NULL))
+ t3_fatal_err(adapter);
+}
+
+#define MC7_INTR_FATAL (F_UE | V_PE(M_PE) | F_AE)
+
+/*
+ * MC7 interrupt handler.
+ */
+static void mc7_intr_handler(struct mc7 *mc7)
+{
+ struct adapter *adapter = mc7->adapter;
+ u32 cause = t3_read_reg(adapter, mc7->offset + A_MC7_INT_CAUSE);
+
+ if (cause & F_CE) {
+ mc7->stats.corr_err++;
+ CH_WARN(adapter, "%s MC7 correctable error at addr 0x%x, "
+ "data 0x%x 0x%x 0x%x\n", mc7->name,
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_ADDR),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA0),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA1),
+ t3_read_reg(adapter, mc7->offset + A_MC7_CE_DATA2));
+ }
+
+ if (cause & F_UE) {
+ mc7->stats.uncorr_err++;
+ CH_ALERT(adapter, "%s MC7 uncorrectable error at addr 0x%x, "
+ "data 0x%x 0x%x 0x%x\n", mc7->name,
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_ADDR),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA0),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA1),
+ t3_read_reg(adapter, mc7->offset + A_MC7_UE_DATA2));
+ }
+
+ if (G_PE(cause)) {
+ mc7->stats.parity_err++;
+ CH_ALERT(adapter, "%s MC7 parity error 0x%x\n",
+ mc7->name, G_PE(cause));
+ }
+
+ if (cause & F_AE) {
+ u32 addr = 0;
+
+ if (adapter->params.rev > 0)
+ addr = t3_read_reg(adapter,
+ mc7->offset + A_MC7_ERR_ADDR);
+ mc7->stats.addr_err++;
+ CH_ALERT(adapter, "%s MC7 address error: 0x%x\n",
+ mc7->name, addr);
+ }
+
+ if (cause & MC7_INTR_FATAL)
+ t3_fatal_err(adapter);
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_INT_CAUSE, cause);
+}
+
+#define XGM_INTR_FATAL (V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR) | \
+ V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR))
+/*
+ * XGMAC interrupt handler.
+ */
+static int mac_intr_handler(struct adapter *adap, unsigned int idx)
+{
+ struct cmac *mac = &adap2pinfo(adap, idx)->mac;
+ u32 cause = t3_read_reg(adap, A_XGM_INT_CAUSE + mac->offset);
+
+ if (cause & V_TXFIFO_PRTY_ERR(M_TXFIFO_PRTY_ERR)) {
+ mac->stats.tx_fifo_parity_err++;
+ CH_ALERT(adap, "port%d: MAC TX FIFO parity error\n", idx);
+ }
+ if (cause & V_RXFIFO_PRTY_ERR(M_RXFIFO_PRTY_ERR)) {
+ mac->stats.rx_fifo_parity_err++;
+ CH_ALERT(adap, "port%d: MAC RX FIFO parity error\n", idx);
+ }
+ if (cause & F_TXFIFO_UNDERRUN)
+ mac->stats.tx_fifo_urun++;
+ if (cause & F_RXFIFO_OVERFLOW)
+ mac->stats.rx_fifo_ovfl++;
+ if (cause & V_SERDES_LOS(M_SERDES_LOS))
+ mac->stats.serdes_signal_loss++;
+ if (cause & F_XAUIPCSCTCERR)
+ mac->stats.xaui_pcs_ctc_err++;
+ if (cause & F_XAUIPCSALIGNCHANGE)
+ mac->stats.xaui_pcs_align_change++;
+
+ t3_write_reg(adap, A_XGM_INT_CAUSE + mac->offset, cause);
+ if (cause & XGM_INTR_FATAL)
+ t3_fatal_err(adap);
+ return cause != 0;
+}
+
+/*
+ * Interrupt handler for PHY events.
+ */
+int t3_phy_intr_handler(struct adapter *adapter)
+{
+ static const int intr_gpio_bits[] = { 8, 0x20 };
+
+ u32 i, cause = t3_read_reg(adapter, A_T3DBG_INT_CAUSE);
+
+ for_each_port(adapter, i) {
+ if (cause & intr_gpio_bits[i]) {
+ struct cphy *phy = &adap2pinfo(adapter, i)->phy;
+ int phy_cause = phy->ops->intr_handler(phy);
+
+ if (phy_cause & cphy_cause_link_change)
+ t3_link_changed(adapter, i);
+ if (phy_cause & cphy_cause_fifo_error)
+ phy->fifo_errors++;
+ }
+ }
+
+ t3_write_reg(adapter, A_T3DBG_INT_CAUSE, cause);
+ return 0;
+}
+
+/*
+ * T3 slow path (non-data) interrupt handler.
+ */
+int t3_slow_intr_handler(struct adapter *adapter)
+{
+ u32 cause = t3_read_reg(adapter, A_PL_INT_CAUSE0);
+
+ cause &= adapter->slow_intr_mask;
+ if (!cause)
+ return 0;
+ if (cause & F_PCIM0) {
+ if (is_pcie(adapter))
+ pcie_intr_handler(adapter);
+ else
+ pci_intr_handler(adapter);
+ }
+ if (cause & F_SGE3)
+ t3_sge_err_intr_handler(adapter);
+ if (cause & F_MC7_PMRX)
+ mc7_intr_handler(&adapter->pmrx);
+ if (cause & F_MC7_PMTX)
+ mc7_intr_handler(&adapter->pmtx);
+ if (cause & F_MC7_CM)
+ mc7_intr_handler(&adapter->cm);
+ if (cause & F_CIM)
+ cim_intr_handler(adapter);
+ if (cause & F_TP1)
+ tp_intr_handler(adapter);
+ if (cause & F_ULP2_RX)
+ ulprx_intr_handler(adapter);
+ if (cause & F_ULP2_TX)
+ ulptx_intr_handler(adapter);
+ if (cause & F_PM1_RX)
+ pmrx_intr_handler(adapter);
+ if (cause & F_PM1_TX)
+ pmtx_intr_handler(adapter);
+ if (cause & F_CPL_SWITCH)
+ cplsw_intr_handler(adapter);
+ if (cause & F_MPS0)
+ mps_intr_handler(adapter);
+ if (cause & F_MC5A)
+ t3_mc5_intr_handler(&adapter->mc5);
+ if (cause & F_XGMAC0_0)
+ mac_intr_handler(adapter, 0);
+ if (cause & F_XGMAC0_1)
+ mac_intr_handler(adapter, 1);
+ if (cause & F_T3DBG)
+ t3_os_ext_intr_handler(adapter);
+
+ /* Clear the interrupts just processed. */
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, cause);
+ t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */
+ return 1;
+}
+
+/**
+ * t3_intr_enable - enable interrupts
+ * @adapter: the adapter whose interrupts should be enabled
+ *
+ * Enable interrupts by setting the interrupt enable registers of the
+ * various HW modules and then enabling the top-level interrupt
+ * concentrator.
+ */
+void t3_intr_enable(struct adapter *adapter)
+{
+ static const struct addr_val_pair intr_en_avp[] = {
+ {A_SG_INT_ENABLE, SGE_INTR_MASK},
+ {A_MC7_INT_ENABLE, MC7_INTR_MASK},
+ {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR,
+ MC7_INTR_MASK},
+ {A_MC7_INT_ENABLE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR,
+ MC7_INTR_MASK},
+ {A_MC5_DB_INT_ENABLE, MC5_INTR_MASK},
+ {A_ULPRX_INT_ENABLE, ULPRX_INTR_MASK},
+ {A_TP_INT_ENABLE, 0x3bfffff},
+ {A_PM1_TX_INT_ENABLE, PMTX_INTR_MASK},
+ {A_PM1_RX_INT_ENABLE, PMRX_INTR_MASK},
+ {A_CIM_HOST_INT_ENABLE, CIM_INTR_MASK},
+ {A_MPS_INT_ENABLE, MPS_INTR_MASK},
+ };
+
+ adapter->slow_intr_mask = PL_INTR_MASK;
+
+ t3_write_regs(adapter, intr_en_avp, ARRAY_SIZE(intr_en_avp), 0);
+
+ if (adapter->params.rev > 0) {
+ t3_write_reg(adapter, A_CPL_INTR_ENABLE,
+ CPLSW_INTR_MASK | F_CIM_OVFL_ERROR);
+ t3_write_reg(adapter, A_ULPTX_INT_ENABLE,
+ ULPTX_INTR_MASK | F_PBL_BOUND_ERR_CH0 |
+ F_PBL_BOUND_ERR_CH1);
+ } else {
+ t3_write_reg(adapter, A_CPL_INTR_ENABLE, CPLSW_INTR_MASK);
+ t3_write_reg(adapter, A_ULPTX_INT_ENABLE, ULPTX_INTR_MASK);
+ }
+
+ t3_write_reg(adapter, A_T3DBG_GPIO_ACT_LOW,
+ adapter_info(adapter)->gpio_intr);
+ t3_write_reg(adapter, A_T3DBG_INT_ENABLE,
+ adapter_info(adapter)->gpio_intr);
+ if (is_pcie(adapter))
+ t3_write_reg(adapter, A_PCIE_INT_ENABLE, PCIE_INTR_MASK);
+ else
+ t3_write_reg(adapter, A_PCIX_INT_ENABLE, PCIX_INTR_MASK);
+ t3_write_reg(adapter, A_PL_INT_ENABLE0, adapter->slow_intr_mask);
+ t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */
+}
+
+/**
+ * t3_intr_disable - disable a card's interrupts
+ * @adapter: the adapter whose interrupts should be disabled
+ *
+ * Disable interrupts. We only disable the top-level interrupt
+ * concentrator and the SGE data interrupts.
+ */
+void t3_intr_disable(struct adapter *adapter)
+{
+ t3_write_reg(adapter, A_PL_INT_ENABLE0, 0);
+ t3_read_reg(adapter, A_PL_INT_ENABLE0); /* flush */
+ adapter->slow_intr_mask = 0;
+}
+
+/**
+ * t3_intr_clear - clear all interrupts
+ * @adapter: the adapter whose interrupts should be cleared
+ *
+ * Clears all interrupts.
+ */
+void t3_intr_clear(struct adapter *adapter)
+{
+ static const unsigned int cause_reg_addr[] = {
+ A_SG_INT_CAUSE,
+ A_SG_RSPQ_FL_STATUS,
+ A_PCIX_INT_CAUSE,
+ A_MC7_INT_CAUSE,
+ A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_PMTX_BASE_ADDR,
+ A_MC7_INT_CAUSE - MC7_PMRX_BASE_ADDR + MC7_CM_BASE_ADDR,
+ A_CIM_HOST_INT_CAUSE,
+ A_TP_INT_CAUSE,
+ A_MC5_DB_INT_CAUSE,
+ A_ULPRX_INT_CAUSE,
+ A_ULPTX_INT_CAUSE,
+ A_CPL_INTR_CAUSE,
+ A_PM1_TX_INT_CAUSE,
+ A_PM1_RX_INT_CAUSE,
+ A_MPS_INT_CAUSE,
+ A_T3DBG_INT_CAUSE,
+ };
+ unsigned int i;
+
+ /* Clear PHY and MAC interrupts for each port. */
+ for_each_port(adapter, i)
+ t3_port_intr_clear(adapter, i);
+
+ for (i = 0; i < ARRAY_SIZE(cause_reg_addr); ++i)
+ t3_write_reg(adapter, cause_reg_addr[i], 0xffffffff);
+
+ t3_write_reg(adapter, A_PL_INT_CAUSE0, 0xffffffff);
+ t3_read_reg(adapter, A_PL_INT_CAUSE0); /* flush */
+}
+
+/**
+ * t3_port_intr_enable - enable port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts should be enabled
+ *
+ * Enable port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_enable(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), XGM_INTR_MASK);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */
+ phy->ops->intr_enable(phy);
+}
+
+/**
+ * t3_port_intr_disable - disable port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts should be disabled
+ *
+ * Disable port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_disable(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx), 0);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_ENABLE, idx)); /* flush */
+ phy->ops->intr_disable(phy);
+}
+
+/**
+ * t3_port_intr_clear - clear port-specific interrupts
+ * @adapter: associated adapter
+ * @idx: index of port whose interrupts to clear
+ *
+ * Clear port-specific (i.e., MAC and PHY) interrupts for the given
+ * adapter port.
+ */
+void t3_port_intr_clear(struct adapter *adapter, int idx)
+{
+ struct cphy *phy = &adap2pinfo(adapter, idx)->phy;
+
+ t3_write_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx), 0xffffffff);
+ t3_read_reg(adapter, XGM_REG(A_XGM_INT_CAUSE, idx)); /* flush */
+ phy->ops->intr_clear(phy);
+}
+
+/**
+ * t3_sge_write_context - write an SGE context
+ * @adapter: the adapter
+ * @id: the context id
+ * @type: the context type
+ *
+ * Program an SGE context with the values already loaded in the
+ * CONTEXT_DATA? registers.
+ */
+static int t3_sge_write_context(struct adapter *adapter, unsigned int id,
+ unsigned int type)
+{
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0xffffffff);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | type | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_init_ecntxt - initialize an SGE egress context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @gts_enable: whether to enable GTS for the context
+ * @type: the egress context type
+ * @respq: associated response queue
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @token: uP token
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE egress context and make it ready for use. If the
+ * platform allows concurrent context operations, the caller is
+ * responsible for appropriate locking.
+ */
+int t3_sge_init_ecntxt(struct adapter *adapter, unsigned int id, int gts_enable,
+ enum sge_context_type type, int respq, u64 base_addr,
+ unsigned int size, unsigned int token, int gen,
+ unsigned int cidx)
+{
+ unsigned int credits = type == SGE_CNTXT_OFLD ? 0 : FW_WR_NUM;
+
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_EC_INDEX(cidx) |
+ V_EC_CREDITS(credits) | V_EC_GTS(gts_enable));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, V_EC_SIZE(size) |
+ V_EC_BASE_LO(base_addr & 0xffff));
+ base_addr >>= 16;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3,
+ V_EC_BASE_HI(base_addr & 0xf) | V_EC_RESPQ(respq) |
+ V_EC_TYPE(type) | V_EC_GEN(gen) | V_EC_UP_TOKEN(token) |
+ F_EC_VALID);
+ return t3_sge_write_context(adapter, id, F_EGRESS);
+}
+
+/**
+ * t3_sge_init_flcntxt - initialize an SGE free-buffer list context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @gts_enable: whether to enable GTS for the context
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @bsize: size of each buffer for this queue
+ * @cong_thres: threshold to signal congestion to upstream producers
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE free list context and make it ready for use. The
+ * caller is responsible for ensuring only one context operation occurs
+ * at a time.
+ */
+int t3_sge_init_flcntxt(struct adapter *adapter, unsigned int id,
+ int gts_enable, u64 base_addr, unsigned int size,
+ unsigned int bsize, unsigned int cong_thres, int gen,
+ unsigned int cidx)
+{
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1,
+ V_FL_BASE_HI((u32) base_addr) |
+ V_FL_INDEX_LO(cidx & M_FL_INDEX_LO));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, V_FL_SIZE(size) |
+ V_FL_GEN(gen) | V_FL_INDEX_HI(cidx >> 12) |
+ V_FL_ENTRY_SIZE_LO(bsize & M_FL_ENTRY_SIZE_LO));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3,
+ V_FL_ENTRY_SIZE_HI(bsize >> (32 - S_FL_ENTRY_SIZE_LO)) |
+ V_FL_CONG_THRES(cong_thres) | V_FL_GTS(gts_enable));
+ return t3_sge_write_context(adapter, id, F_FREELIST);
+}
+
+/**
+ * t3_sge_init_rspcntxt - initialize an SGE response queue context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @irq_vec_idx: MSI-X interrupt vector index, 0 if no MSI-X, -1 if no IRQ
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @fl_thres: threshold for selecting the normal or jumbo free list
+ * @gen: initial generation value for the context
+ * @cidx: consumer pointer
+ *
+ * Initialize an SGE response queue context and make it ready for use.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_init_rspcntxt(struct adapter *adapter, unsigned int id,
+ int irq_vec_idx, u64 base_addr, unsigned int size,
+ unsigned int fl_thres, int gen, unsigned int cidx)
+{
+ unsigned int intr = 0;
+
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size) |
+ V_CQ_INDEX(cidx));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr);
+ base_addr >>= 32;
+ if (irq_vec_idx >= 0)
+ intr = V_RQ_MSI_VEC(irq_vec_idx) | F_RQ_INTR_EN;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2,
+ V_CQ_BASE_HI((u32) base_addr) | intr | V_RQ_GEN(gen));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, fl_thres);
+ return t3_sge_write_context(adapter, id, F_RESPONSEQ);
+}
+
+/**
+ * t3_sge_init_cqcntxt - initialize an SGE completion queue context
+ * @adapter: the adapter to configure
+ * @id: the context id
+ * @base_addr: base address of queue
+ * @size: number of queue entries
+ * @rspq: response queue for async notifications
+ * @ovfl_mode: CQ overflow mode
+ * @credits: completion queue credits
+ * @credit_thres: the credit threshold
+ *
+ * Initialize an SGE completion queue context and make it ready for use.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_init_cqcntxt(struct adapter *adapter, unsigned int id, u64 base_addr,
+ unsigned int size, int rspq, int ovfl_mode,
+ unsigned int credits, unsigned int credit_thres)
+{
+ if (base_addr & 0xfff) /* must be 4K aligned */
+ return -EINVAL;
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ base_addr >>= 12;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, V_CQ_SIZE(size));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA1, base_addr);
+ base_addr >>= 32;
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2,
+ V_CQ_BASE_HI((u32) base_addr) | V_CQ_RSPQ(rspq) |
+ V_CQ_GEN(1) | V_CQ_OVERFLOW_MODE(ovfl_mode));
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_CQ_CREDITS(credits) |
+ V_CQ_CREDIT_THRES(credit_thres));
+ return t3_sge_write_context(adapter, id, F_CQ);
+}
+
+/**
+ * t3_sge_enable_ecntxt - enable/disable an SGE egress context
+ * @adapter: the adapter
+ * @id: the egress context id
+ * @enable: enable (1) or disable (0) the context
+ *
+ * Enable or disable an SGE egress context. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_enable_ecntxt(struct adapter *adapter, unsigned int id, int enable)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, F_EC_VALID);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA3, V_EC_VALID(enable));
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_EGRESS | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_fl - disable an SGE free-buffer list
+ * @adapter: the adapter
+ * @id: the free list context id
+ *
+ * Disable an SGE free-buffer list. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_fl(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, V_FL_SIZE(M_FL_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_FREELIST | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_rspcntxt - disable an SGE response queue
+ * @adapter: the adapter
+ * @id: the response queue context id
+ *
+ * Disable an SGE response queue. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_rspcntxt(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_RESPONSEQ | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_disable_cqcntxt - disable an SGE completion queue
+ * @adapter: the adapter
+ * @id: the completion queue context id
+ *
+ * Disable an SGE completion queue. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_disable_cqcntxt(struct adapter *adapter, unsigned int id)
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK0, V_CQ_SIZE(M_CQ_SIZE));
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK1, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK2, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_MASK3, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, 0);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(1) | F_CQ | V_CONTEXT(id));
+ return t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1);
+}
+
+/**
+ * t3_sge_cqcntxt_op - perform an operation on a completion queue context
+ * @adapter: the adapter
+ * @id: the context id
+ * @op: the operation to perform
+ *
+ * Perform the selected operation on an SGE completion queue context.
+ * The caller is responsible for ensuring only one context operation
+ * occurs at a time.
+ */
+int t3_sge_cqcntxt_op(struct adapter *adapter, unsigned int id, unsigned int op,
+ unsigned int credits)
+{
+ u32 val;
+
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_DATA0, credits << 16);
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD, V_CONTEXT_CMD_OPCODE(op) |
+ V_CONTEXT(id) | F_CQ);
+ if (t3_wait_op_done_val(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY,
+ 0, 5, 1, &val))
+ return -EIO;
+
+ if (op >= 2 && op < 7) {
+ if (adapter->params.rev > 0)
+ return G_CQ_INDEX(val);
+
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(0) | F_CQ | V_CONTEXT(id));
+ if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD,
+ F_CONTEXT_CMD_BUSY, 0, 5, 1))
+ return -EIO;
+ return G_CQ_INDEX(t3_read_reg(adapter, A_SG_CONTEXT_DATA0));
+ }
+ return 0;
+}
+
+/**
+ * t3_sge_read_context - read an SGE context
+ * @type: the context type
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE egress context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+static int t3_sge_read_context(unsigned int type, struct adapter *adapter,
+ unsigned int id, u32 data[4])
+{
+ if (t3_read_reg(adapter, A_SG_CONTEXT_CMD) & F_CONTEXT_CMD_BUSY)
+ return -EBUSY;
+
+ t3_write_reg(adapter, A_SG_CONTEXT_CMD,
+ V_CONTEXT_CMD_OPCODE(0) | type | V_CONTEXT(id));
+ if (t3_wait_op_done(adapter, A_SG_CONTEXT_CMD, F_CONTEXT_CMD_BUSY, 0,
+ 5, 1))
+ return -EIO;
+ data[0] = t3_read_reg(adapter, A_SG_CONTEXT_DATA0);
+ data[1] = t3_read_reg(adapter, A_SG_CONTEXT_DATA1);
+ data[2] = t3_read_reg(adapter, A_SG_CONTEXT_DATA2);
+ data[3] = t3_read_reg(adapter, A_SG_CONTEXT_DATA3);
+ return 0;
+}
+
+/**
+ * t3_sge_read_ecntxt - read an SGE egress context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE egress context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_ecntxt(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= 65536)
+ return -EINVAL;
+ return t3_sge_read_context(F_EGRESS, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_cq - read an SGE CQ context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE CQ context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_cq(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= 65536)
+ return -EINVAL;
+ return t3_sge_read_context(F_CQ, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_fl - read an SGE free-list context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE free-list context. The caller is responsible for ensuring
+ * only one context operation occurs at a time.
+ */
+int t3_sge_read_fl(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= SGE_QSETS * 2)
+ return -EINVAL;
+ return t3_sge_read_context(F_FREELIST, adapter, id, data);
+}
+
+/**
+ * t3_sge_read_rspq - read an SGE response queue context
+ * @adapter: the adapter
+ * @id: the context id
+ * @data: holds the retrieved context
+ *
+ * Read an SGE response queue context. The caller is responsible for
+ * ensuring only one context operation occurs at a time.
+ */
+int t3_sge_read_rspq(struct adapter *adapter, unsigned int id, u32 data[4])
+{
+ if (id >= SGE_QSETS)
+ return -EINVAL;
+ return t3_sge_read_context(F_RESPONSEQ, adapter, id, data);
+}
+
+/**
+ * t3_config_rss - configure Rx packet steering
+ * @adapter: the adapter
+ * @rss_config: RSS settings (written to TP_RSS_CONFIG)
+ * @cpus: values for the CPU lookup table (0xff terminated)
+ * @rspq: values for the response queue lookup table (0xffff terminated)
+ *
+ * Programs the receive packet steering logic. @cpus and @rspq provide
+ * the values for the CPU and response queue lookup tables. If they
+ * provide fewer values than the size of the tables the supplied values
+ * are used repeatedly until the tables are fully populated.
+ */
+void t3_config_rss(struct adapter *adapter, unsigned int rss_config,
+ const u8 * cpus, const u16 *rspq)
+{
+ int i, j, cpu_idx = 0, q_idx = 0;
+
+ if (cpus)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ u32 val = i << 16;
+
+ for (j = 0; j < 2; ++j) {
+ val |= (cpus[cpu_idx++] & 0x3f) << (8 * j);
+ if (cpus[cpu_idx] == 0xff)
+ cpu_idx = 0;
+ }
+ t3_write_reg(adapter, A_TP_RSS_LKP_TABLE, val);
+ }
+
+ if (rspq)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_MAP_TABLE,
+ (i << 16) | rspq[q_idx++]);
+ if (rspq[q_idx] == 0xffff)
+ q_idx = 0;
+ }
+
+ t3_write_reg(adapter, A_TP_RSS_CONFIG, rss_config);
+}
+
+/**
+ * t3_read_rss - read the contents of the RSS tables
+ * @adapter: the adapter
+ * @lkup: holds the contents of the RSS lookup table
+ * @map: holds the contents of the RSS map table
+ *
+ * Reads the contents of the receive packet steering tables.
+ */
+int t3_read_rss(struct adapter *adapter, u8 * lkup, u16 *map)
+{
+ int i;
+ u32 val;
+
+ if (lkup)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_LKP_TABLE,
+ 0xffff0000 | i);
+ val = t3_read_reg(adapter, A_TP_RSS_LKP_TABLE);
+ if (!(val & 0x80000000))
+ return -EAGAIN;
+ *lkup++ = val;
+ *lkup++ = (val >> 8);
+ }
+
+ if (map)
+ for (i = 0; i < RSS_TABLE_SIZE; ++i) {
+ t3_write_reg(adapter, A_TP_RSS_MAP_TABLE,
+ 0xffff0000 | i);
+ val = t3_read_reg(adapter, A_TP_RSS_MAP_TABLE);
+ if (!(val & 0x80000000))
+ return -EAGAIN;
+ *map++ = val;
+ }
+ return 0;
+}
+
+/**
+ * t3_tp_set_offload_mode - put TP in NIC/offload mode
+ * @adap: the adapter
+ * @enable: 1 to select offload mode, 0 for regular NIC
+ *
+ * Switches TP to NIC/offload mode.
+ */
+void t3_tp_set_offload_mode(struct adapter *adap, int enable)
+{
+ if (is_offload(adap) || !enable)
+ t3_set_reg_field(adap, A_TP_IN_CONFIG, F_NICMODE,
+ V_NICMODE(!enable));
+}
+
+/**
+ * pm_num_pages - calculate the number of pages of the payload memory
+ * @mem_size: the size of the payload memory
+ * @pg_size: the size of each payload memory page
+ *
+ * Calculate the number of pages, each of the given size, that fit in a
+ * memory of the specified size, respecting the HW requirement that the
+ * number of pages must be a multiple of 24.
+ */
+static inline unsigned int pm_num_pages(unsigned int mem_size,
+ unsigned int pg_size)
+{
+ unsigned int n = mem_size / pg_size;
+
+ return n - n % 24;
+}
+
+#define mem_region(adap, start, size, reg) \
+ t3_write_reg((adap), A_ ## reg, (start)); \
+ start += size
+
+/*
+ * partition_mem - partition memory and configure TP memory settings
+ * @adap: the adapter
+ * @p: the TP parameters
+ *
+ * Partitions context and payload memory and configures TP's memory
+ * registers.
+ */
+static void partition_mem(struct adapter *adap, const struct tp_params *p)
+{
+ unsigned int m, pstructs, tids = t3_mc5_size(&adap->mc5);
+ unsigned int timers = 0, timers_shift = 22;
+
+ if (adap->params.rev > 0) {
+ if (tids <= 16 * 1024) {
+ timers = 1;
+ timers_shift = 16;
+ } else if (tids <= 64 * 1024) {
+ timers = 2;
+ timers_shift = 18;
+ } else if (tids <= 256 * 1024) {
+ timers = 3;
+ timers_shift = 20;
+ }
+ }
+
+ t3_write_reg(adap, A_TP_PMM_SIZE,
+ p->chan_rx_size | (p->chan_tx_size >> 16));
+
+ t3_write_reg(adap, A_TP_PMM_TX_BASE, 0);
+ t3_write_reg(adap, A_TP_PMM_TX_PAGE_SIZE, p->tx_pg_size);
+ t3_write_reg(adap, A_TP_PMM_TX_MAX_PAGE, p->tx_num_pgs);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, V_TXDATAACKIDX(M_TXDATAACKIDX),
+ V_TXDATAACKIDX(fls(p->tx_pg_size) - 12));
+
+ t3_write_reg(adap, A_TP_PMM_RX_BASE, 0);
+ t3_write_reg(adap, A_TP_PMM_RX_PAGE_SIZE, p->rx_pg_size);
+ t3_write_reg(adap, A_TP_PMM_RX_MAX_PAGE, p->rx_num_pgs);
+
+ pstructs = p->rx_num_pgs + p->tx_num_pgs;
+ /* Add a bit of headroom and make multiple of 24 */
+ pstructs += 48;
+ pstructs -= pstructs % 24;
+ t3_write_reg(adap, A_TP_CMM_MM_MAX_PSTRUCT, pstructs);
+
+ m = tids * TCB_SIZE;
+ mem_region(adap, m, (64 << 10) * 64, SG_EGR_CNTX_BADDR);
+ mem_region(adap, m, (64 << 10) * 64, SG_CQ_CONTEXT_BADDR);
+ t3_write_reg(adap, A_TP_CMM_TIMER_BASE, V_CMTIMERMAXNUM(timers) | m);
+ m += ((p->ntimer_qs - 1) << timers_shift) + (1 << 22);
+ mem_region(adap, m, pstructs * 64, TP_CMM_MM_BASE);
+ mem_region(adap, m, 64 * (pstructs / 24), TP_CMM_MM_PS_FLST_BASE);
+ mem_region(adap, m, 64 * (p->rx_num_pgs / 24), TP_CMM_MM_RX_FLST_BASE);
+ mem_region(adap, m, 64 * (p->tx_num_pgs / 24), TP_CMM_MM_TX_FLST_BASE);
+
+ m = (m + 4095) & ~0xfff;
+ t3_write_reg(adap, A_CIM_SDRAM_BASE_ADDR, m);
+ t3_write_reg(adap, A_CIM_SDRAM_ADDR_SIZE, p->cm_size - m);
+
+ tids = (p->cm_size - m - (3 << 20)) / 3072 - 32;
+ m = t3_mc5_size(&adap->mc5) - adap->params.mc5.nservers -
+ adap->params.mc5.nfilters - adap->params.mc5.nroutes;
+ if (tids < m)
+ adap->params.mc5.nservers += m - tids;
+}
+
+static inline void tp_wr_indirect(struct adapter *adap, unsigned int addr,
+ u32 val)
+{
+ t3_write_reg(adap, A_TP_PIO_ADDR, addr);
+ t3_write_reg(adap, A_TP_PIO_DATA, val);
+}
+
+static void tp_config(struct adapter *adap, const struct tp_params *p)
+{
+ t3_write_reg(adap, A_TP_GLOBAL_CONFIG, F_TXPACINGENABLE | F_PATHMTU |
+ F_IPCHECKSUMOFFLOAD | F_UDPCHECKSUMOFFLOAD |
+ F_TCPCHECKSUMOFFLOAD | V_IPTTL(64));
+ t3_write_reg(adap, A_TP_TCP_OPTIONS, V_MTUDEFAULT(576) |
+ F_MTUENABLE | V_WINDOWSCALEMODE(1) |
+ V_TIMESTAMPSMODE(1) | V_SACKMODE(1) | V_SACKRX(1));
+ t3_write_reg(adap, A_TP_DACK_CONFIG, V_AUTOSTATE3(1) |
+ V_AUTOSTATE2(1) | V_AUTOSTATE1(0) |
+ V_BYTETHRESHOLD(16384) | V_MSSTHRESHOLD(2) |
+ F_AUTOCAREFUL | F_AUTOENABLE | V_DACK_MODE(1));
+ t3_set_reg_field(adap, A_TP_IN_CONFIG, F_IPV6ENABLE | F_NICMODE,
+ F_IPV6ENABLE | F_NICMODE);
+ t3_write_reg(adap, A_TP_TX_RESOURCE_LIMIT, 0x18141814);
+ t3_write_reg(adap, A_TP_PARA_REG4, 0x5050105);
+ t3_set_reg_field(adap, A_TP_PARA_REG6,
+ adap->params.rev > 0 ? F_ENABLEESND : F_T3A_ENABLEESND,
+ 0);
+
+ t3_set_reg_field(adap, A_TP_PC_CONFIG,
+ F_ENABLEEPCMDAFULL | F_ENABLEOCSPIFULL,
+ F_TXDEFERENABLE | F_HEARBEATDACK | F_TXCONGESTIONMODE |
+ F_RXCONGESTIONMODE);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG2, F_CHDRAFULL, 0);
+
+ if (adap->params.rev > 0) {
+ tp_wr_indirect(adap, A_TP_EGRESS_CONFIG, F_REWRITEFORCETOSIZE);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, F_TXPACEAUTO,
+ F_TXPACEAUTO);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG, F_LOCKTID, F_LOCKTID);
+ t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEAUTOSTRICT);
+ } else
+ t3_set_reg_field(adap, A_TP_PARA_REG3, 0, F_TXPACEFIXED);
+
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT1, 0x12121212);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_WEIGHT0, 0x12121212);
+ t3_write_reg(adap, A_TP_MOD_CHANNEL_WEIGHT, 0x1212);
+}
+
+/* Desired TP timer resolution in usec */
+#define TP_TMR_RES 50
+
+/* TCP timer values in ms */
+#define TP_DACK_TIMER 50
+#define TP_RTO_MIN 250
+
+/**
+ * tp_set_timers - set TP timing parameters
+ * @adap: the adapter to set
+ * @core_clk: the core clock frequency in Hz
+ *
+ * Set TP's timing parameters, such as the various timer resolutions and
+ * the TCP timer values.
+ */
+static void tp_set_timers(struct adapter *adap, unsigned int core_clk)
+{
+ unsigned int tre = fls(core_clk / (1000000 / TP_TMR_RES)) - 1;
+ unsigned int dack_re = fls(core_clk / 5000) - 1; /* 200us */
+ unsigned int tstamp_re = fls(core_clk / 1000); /* 1ms, at least */
+ unsigned int tps = core_clk >> tre;
+
+ t3_write_reg(adap, A_TP_TIMER_RESOLUTION, V_TIMERRESOLUTION(tre) |
+ V_DELAYEDACKRESOLUTION(dack_re) |
+ V_TIMESTAMPRESOLUTION(tstamp_re));
+ t3_write_reg(adap, A_TP_DACK_TIMER,
+ (core_clk >> dack_re) / (1000 / TP_DACK_TIMER));
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG0, 0x3020100);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG1, 0x7060504);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG2, 0xb0a0908);
+ t3_write_reg(adap, A_TP_TCP_BACKOFF_REG3, 0xf0e0d0c);
+ t3_write_reg(adap, A_TP_SHIFT_CNT, V_SYNSHIFTMAX(6) |
+ V_RXTSHIFTMAXR1(4) | V_RXTSHIFTMAXR2(15) |
+ V_PERSHIFTBACKOFFMAX(8) | V_PERSHIFTMAX(8) |
+ V_KEEPALIVEMAX(9));
+
+#define SECONDS * tps
+
+ t3_write_reg(adap, A_TP_MSL, adap->params.rev > 0 ? 0 : 2 SECONDS);
+ t3_write_reg(adap, A_TP_RXT_MIN, tps / (1000 / TP_RTO_MIN));
+ t3_write_reg(adap, A_TP_RXT_MAX, 64 SECONDS);
+ t3_write_reg(adap, A_TP_PERS_MIN, 5 SECONDS);
+ t3_write_reg(adap, A_TP_PERS_MAX, 64 SECONDS);
+ t3_write_reg(adap, A_TP_KEEP_IDLE, 7200 SECONDS);
+ t3_write_reg(adap, A_TP_KEEP_INTVL, 75 SECONDS);
+ t3_write_reg(adap, A_TP_INIT_SRTT, 3 SECONDS);
+ t3_write_reg(adap, A_TP_FINWAIT2_TIMER, 600 SECONDS);
+
+#undef SECONDS
+}
+
+/**
+ * t3_tp_set_coalescing_size - set receive coalescing size
+ * @adap: the adapter
+ * @size: the receive coalescing size
+ * @psh: whether a set PSH bit should deliver coalesced data
+ *
+ * Set the receive coalescing size and PSH bit handling.
+ */
+int t3_tp_set_coalescing_size(struct adapter *adap, unsigned int size, int psh)
+{
+ u32 val;
+
+ if (size > MAX_RX_COALESCING_LEN)
+ return -EINVAL;
+
+ val = t3_read_reg(adap, A_TP_PARA_REG3);
+ val &= ~(F_RXCOALESCEENABLE | F_RXCOALESCEPSHEN);
+
+ if (size) {
+ val |= F_RXCOALESCEENABLE;
+ if (psh)
+ val |= F_RXCOALESCEPSHEN;
+ t3_write_reg(adap, A_TP_PARA_REG2, V_RXCOALESCESIZE(size) |
+ V_MAXRXDATA(MAX_RX_COALESCING_LEN));
+ }
+ t3_write_reg(adap, A_TP_PARA_REG3, val);
+ return 0;
+}
+
+/**
+ * t3_tp_set_max_rxsize - set the max receive size
+ * @adap: the adapter
+ * @size: the max receive size
+ *
+ * Set TP's max receive size. This is the limit that applies when
+ * receive coalescing is disabled.
+ */
+void t3_tp_set_max_rxsize(struct adapter *adap, unsigned int size)
+{
+ t3_write_reg(adap, A_TP_PARA_REG7,
+ V_PMMAXXFERLEN0(size) | V_PMMAXXFERLEN1(size));
+}
+
+static void __devinit init_mtus(unsigned short mtus[])
+{
+ /*
+ * See draft-mathis-plpmtud-00.txt for the values. The min is 88 so
+ * it can accomodate max size TCP/IP headers when SACK and timestamps
+ * are enabled and still have at least 8 bytes of payload.
+ */
+ mtus[0] = 88;
+ mtus[1] = 256;
+ mtus[2] = 512;
+ mtus[3] = 576;
+ mtus[4] = 808;
+ mtus[5] = 1024;
+ mtus[6] = 1280;
+ mtus[7] = 1492;
+ mtus[8] = 1500;
+ mtus[9] = 2002;
+ mtus[10] = 2048;
+ mtus[11] = 4096;
+ mtus[12] = 4352;
+ mtus[13] = 8192;
+ mtus[14] = 9000;
+ mtus[15] = 9600;
+}
+
+/*
+ * Initial congestion control parameters.
+ */
+static void __devinit init_cong_ctrl(unsigned short *a, unsigned short *b)
+{
+ a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
+ a[9] = 2;
+ a[10] = 3;
+ a[11] = 4;
+ a[12] = 5;
+ a[13] = 6;
+ a[14] = 7;
+ a[15] = 8;
+ a[16] = 9;
+ a[17] = 10;
+ a[18] = 14;
+ a[19] = 17;
+ a[20] = 21;
+ a[21] = 25;
+ a[22] = 30;
+ a[23] = 35;
+ a[24] = 45;
+ a[25] = 60;
+ a[26] = 80;
+ a[27] = 100;
+ a[28] = 200;
+ a[29] = 300;
+ a[30] = 400;
+ a[31] = 500;
+
+ b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
+ b[9] = b[10] = 1;
+ b[11] = b[12] = 2;
+ b[13] = b[14] = b[15] = b[16] = 3;
+ b[17] = b[18] = b[19] = b[20] = b[21] = 4;
+ b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
+ b[28] = b[29] = 6;
+ b[30] = b[31] = 7;
+}
+
+/* The minimum additive increment value for the congestion control table */
+#define CC_MIN_INCR 2U
+
+/**
+ * t3_load_mtus - write the MTU and congestion control HW tables
+ * @adap: the adapter
+ * @mtus: the unrestricted values for the MTU table
+ * @alphs: the values for the congestion control alpha parameter
+ * @beta: the values for the congestion control beta parameter
+ * @mtu_cap: the maximum permitted effective MTU
+ *
+ * Write the MTU table with the supplied MTUs capping each at &mtu_cap.
+ * Update the high-speed congestion control table with the supplied alpha,
+ * beta, and MTUs.
+ */
+void t3_load_mtus(struct adapter *adap, unsigned short mtus[NMTUS],
+ unsigned short alpha[NCCTRL_WIN],
+ unsigned short beta[NCCTRL_WIN], unsigned short mtu_cap)
+{
+ static const unsigned int avg_pkts[NCCTRL_WIN] = {
+ 2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
+ 896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
+ 28672, 40960, 57344, 81920, 114688, 163840, 229376
+ };
+
+ unsigned int i, w;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int mtu = min(mtus[i], mtu_cap);
+ unsigned int log2 = fls(mtu);
+
+ if (!(mtu & ((1 << log2) >> 2))) /* round */
+ log2--;
+ t3_write_reg(adap, A_TP_MTU_TABLE,
+ (i << 24) | (log2 << 16) | mtu);
+
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ unsigned int inc;
+
+ inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
+ CC_MIN_INCR);
+
+ t3_write_reg(adap, A_TP_CCTRL_TABLE, (i << 21) |
+ (w << 16) | (beta[w] << 13) | inc);
+ }
+ }
+}
+
+/**
+ * t3_read_hw_mtus - returns the values in the HW MTU table
+ * @adap: the adapter
+ * @mtus: where to store the HW MTU values
+ *
+ * Reads the HW MTU table.
+ */
+void t3_read_hw_mtus(struct adapter *adap, unsigned short mtus[NMTUS])
+{
+ int i;
+
+ for (i = 0; i < NMTUS; ++i) {
+ unsigned int val;
+
+ t3_write_reg(adap, A_TP_MTU_TABLE, 0xff000000 | i);
+ val = t3_read_reg(adap, A_TP_MTU_TABLE);
+ mtus[i] = val & 0x3fff;
+ }
+}
+
+/**
+ * t3_get_cong_cntl_tab - reads the congestion control table
+ * @adap: the adapter
+ * @incr: where to store the alpha values
+ *
+ * Reads the additive increments programmed into the HW congestion
+ * control table.
+ */
+void t3_get_cong_cntl_tab(struct adapter *adap,
+ unsigned short incr[NMTUS][NCCTRL_WIN])
+{
+ unsigned int mtu, w;
+
+ for (mtu = 0; mtu < NMTUS; ++mtu)
+ for (w = 0; w < NCCTRL_WIN; ++w) {
+ t3_write_reg(adap, A_TP_CCTRL_TABLE,
+ 0xffff0000 | (mtu << 5) | w);
+ incr[mtu][w] = t3_read_reg(adap, A_TP_CCTRL_TABLE) &
+ 0x1fff;
+ }
+}
+
+/**
+ * t3_tp_get_mib_stats - read TP's MIB counters
+ * @adap: the adapter
+ * @tps: holds the returned counter values
+ *
+ * Returns the values of TP's MIB counters.
+ */
+void t3_tp_get_mib_stats(struct adapter *adap, struct tp_mib_stats *tps)
+{
+ t3_read_indirect(adap, A_TP_MIB_INDEX, A_TP_MIB_RDATA, (u32 *) tps,
+ sizeof(*tps) / sizeof(u32), 0);
+}
+
+#define ulp_region(adap, name, start, len) \
+ t3_write_reg((adap), A_ULPRX_ ## name ## _LLIMIT, (start)); \
+ t3_write_reg((adap), A_ULPRX_ ## name ## _ULIMIT, \
+ (start) + (len) - 1); \
+ start += len
+
+#define ulptx_region(adap, name, start, len) \
+ t3_write_reg((adap), A_ULPTX_ ## name ## _LLIMIT, (start)); \
+ t3_write_reg((adap), A_ULPTX_ ## name ## _ULIMIT, \
+ (start) + (len) - 1)
+
+static void ulp_config(struct adapter *adap, const struct tp_params *p)
+{
+ unsigned int m = p->chan_rx_size;
+
+ ulp_region(adap, ISCSI, m, p->chan_rx_size / 8);
+ ulp_region(adap, TDDP, m, p->chan_rx_size / 8);
+ ulptx_region(adap, TPT, m, p->chan_rx_size / 4);
+ ulp_region(adap, STAG, m, p->chan_rx_size / 4);
+ ulp_region(adap, RQ, m, p->chan_rx_size / 4);
+ ulptx_region(adap, PBL, m, p->chan_rx_size / 4);
+ ulp_region(adap, PBL, m, p->chan_rx_size / 4);
+ t3_write_reg(adap, A_ULPRX_TDDP_TAGMASK, 0xffffffff);
+}
+
+void t3_config_trace_filter(struct adapter *adapter,
+ const struct trace_params *tp, int filter_index,
+ int invert, int enable)
+{
+ u32 addr, key[4], mask[4];
+
+ key[0] = tp->sport | (tp->sip << 16);
+ key[1] = (tp->sip >> 16) | (tp->dport << 16);
+ key[2] = tp->dip;
+ key[3] = tp->proto | (tp->vlan << 8) | (tp->intf << 20);
+
+ mask[0] = tp->sport_mask | (tp->sip_mask << 16);
+ mask[1] = (tp->sip_mask >> 16) | (tp->dport_mask << 16);
+ mask[2] = tp->dip_mask;
+ mask[3] = tp->proto_mask | (tp->vlan_mask << 8) | (tp->intf_mask << 20);
+
+ if (invert)
+ key[3] |= (1 << 29);
+ if (enable)
+ key[3] |= (1 << 28);
+
+ addr = filter_index ? A_TP_RX_TRC_KEY0 : A_TP_TX_TRC_KEY0;
+ tp_wr_indirect(adapter, addr++, key[0]);
+ tp_wr_indirect(adapter, addr++, mask[0]);
+ tp_wr_indirect(adapter, addr++, key[1]);
+ tp_wr_indirect(adapter, addr++, mask[1]);
+ tp_wr_indirect(adapter, addr++, key[2]);
+ tp_wr_indirect(adapter, addr++, mask[2]);
+ tp_wr_indirect(adapter, addr++, key[3]);
+ tp_wr_indirect(adapter, addr, mask[3]);
+ t3_read_reg(adapter, A_TP_PIO_DATA);
+}
+
+/**
+ * t3_config_sched - configure a HW traffic scheduler
+ * @adap: the adapter
+ * @kbps: target rate in Kbps
+ * @sched: the scheduler index
+ *
+ * Configure a HW scheduler for the target rate
+ */
+int t3_config_sched(struct adapter *adap, unsigned int kbps, int sched)
+{
+ unsigned int v, tps, cpt, bpt, delta, mindelta = ~0;
+ unsigned int clk = adap->params.vpd.cclk * 1000;
+ unsigned int selected_cpt = 0, selected_bpt = 0;
+
+ if (kbps > 0) {
+ kbps *= 125; /* -> bytes */
+ for (cpt = 1; cpt <= 255; cpt++) {
+ tps = clk / cpt;
+ bpt = (kbps + tps / 2) / tps;
+ if (bpt > 0 && bpt <= 255) {
+ v = bpt * tps;
+ delta = v >= kbps ? v - kbps : kbps - v;
+ if (delta <= mindelta) {
+ mindelta = delta;
+ selected_cpt = cpt;
+ selected_bpt = bpt;
+ }
+ } else if (selected_cpt)
+ break;
+ }
+ if (!selected_cpt)
+ return -EINVAL;
+ }
+ t3_write_reg(adap, A_TP_TM_PIO_ADDR,
+ A_TP_TX_MOD_Q1_Q0_RATE_LIMIT - sched / 2);
+ v = t3_read_reg(adap, A_TP_TM_PIO_DATA);
+ if (sched & 1)
+ v = (v & 0xffff) | (selected_cpt << 16) | (selected_bpt << 24);
+ else
+ v = (v & 0xffff0000) | selected_cpt | (selected_bpt << 8);
+ t3_write_reg(adap, A_TP_TM_PIO_DATA, v);
+ return 0;
+}
+
+static int tp_init(struct adapter *adap, const struct tp_params *p)
+{
+ int busy = 0;
+
+ tp_config(adap, p);
+ t3_set_vlan_accel(adap, 3, 0);
+
+ if (is_offload(adap)) {
+ tp_set_timers(adap, adap->params.vpd.cclk * 1000);
+ t3_write_reg(adap, A_TP_RESET, F_FLSTINITENABLE);
+ busy = t3_wait_op_done(adap, A_TP_RESET, F_FLSTINITENABLE,
+ 0, 1000, 5);
+ if (busy)
+ CH_ERR(adap, "TP initialization timed out\n");
+ }
+
+ if (!busy)
+ t3_write_reg(adap, A_TP_RESET, F_TPRESET);
+ return busy;
+}
+
+int t3_mps_set_active_ports(struct adapter *adap, unsigned int port_mask)
+{
+ if (port_mask & ~((1 << adap->params.nports) - 1))
+ return -EINVAL;
+ t3_set_reg_field(adap, A_MPS_CFG, F_PORT1ACTIVE | F_PORT0ACTIVE,
+ port_mask << S_PORT0ACTIVE);
+ return 0;
+}
+
+/*
+ * Perform the bits of HW initialization that are dependent on the number
+ * of available ports.
+ */
+static void init_hw_for_avail_ports(struct adapter *adap, int nports)
+{
+ int i;
+
+ if (nports == 1) {
+ t3_set_reg_field(adap, A_ULPRX_CTL, F_ROUND_ROBIN, 0);
+ t3_set_reg_field(adap, A_ULPTX_CONFIG, F_CFG_RR_ARB, 0);
+ t3_write_reg(adap, A_MPS_CFG, F_TPRXPORTEN | F_TPTXPORT0EN |
+ F_PORT0ACTIVE | F_ENFORCEPKT);
+ t3_write_reg(adap, A_PM1_TX_CFG, 0xc000c000);
+ } else {
+ t3_set_reg_field(adap, A_ULPRX_CTL, 0, F_ROUND_ROBIN);
+ t3_set_reg_field(adap, A_ULPTX_CONFIG, 0, F_CFG_RR_ARB);
+ t3_write_reg(adap, A_ULPTX_DMA_WEIGHT,
+ V_D1_WEIGHT(16) | V_D0_WEIGHT(16));
+ t3_write_reg(adap, A_MPS_CFG, F_TPTXPORT0EN | F_TPTXPORT1EN |
+ F_TPRXPORTEN | F_PORT0ACTIVE | F_PORT1ACTIVE |
+ F_ENFORCEPKT);
+ t3_write_reg(adap, A_PM1_TX_CFG, 0x80008000);
+ t3_set_reg_field(adap, A_TP_PC_CONFIG, 0, F_TXTOSQUEUEMAPMODE);
+ t3_write_reg(adap, A_TP_TX_MOD_QUEUE_REQ_MAP,
+ V_TX_MOD_QUEUE_REQ_MAP(0xaa));
+ for (i = 0; i < 16; i++)
+ t3_write_reg(adap, A_TP_TX_MOD_QUE_TABLE,
+ (i << 16) | 0x1010);
+ }
+}
+
+static int calibrate_xgm(struct adapter *adapter)
+{
+ if (uses_xaui(adapter)) {
+ unsigned int v, i;
+
+ for (i = 0; i < 5; ++i) {
+ t3_write_reg(adapter, A_XGM_XAUI_IMP, 0);
+ t3_read_reg(adapter, A_XGM_XAUI_IMP);
+ msleep(1);
+ v = t3_read_reg(adapter, A_XGM_XAUI_IMP);
+ if (!(v & (F_XGM_CALFAULT | F_CALBUSY))) {
+ t3_write_reg(adapter, A_XGM_XAUI_IMP,
+ V_XAUIIMP(G_CALIMP(v) >> 2));
+ return 0;
+ }
+ }
+ CH_ERR(adapter, "MAC calibration failed\n");
+ return -1;
+ } else {
+ t3_write_reg(adapter, A_XGM_RGMII_IMP,
+ V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3));
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE,
+ F_XGM_IMPSETUPDATE);
+ }
+ return 0;
+}
+
+static void calibrate_xgm_t3b(struct adapter *adapter)
+{
+ if (!uses_xaui(adapter)) {
+ t3_write_reg(adapter, A_XGM_RGMII_IMP, F_CALRESET |
+ F_CALUPDATE | V_RGMIIIMPPD(2) | V_RGMIIIMPPU(3));
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALRESET, 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0,
+ F_XGM_IMPSETUPDATE);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_XGM_IMPSETUPDATE,
+ 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, F_CALUPDATE, 0);
+ t3_set_reg_field(adapter, A_XGM_RGMII_IMP, 0, F_CALUPDATE);
+ }
+}
+
+struct mc7_timing_params {
+ unsigned char ActToPreDly;
+ unsigned char ActToRdWrDly;
+ unsigned char PreCyc;
+ unsigned char RefCyc[5];
+ unsigned char BkCyc;
+ unsigned char WrToRdDly;
+ unsigned char RdToWrDly;
+};
+
+/*
+ * Write a value to a register and check that the write completed. These
+ * writes normally complete in a cycle or two, so one read should suffice.
+ * The very first read exists to flush the posted write to the device.
+ */
+static int wrreg_wait(struct adapter *adapter, unsigned int addr, u32 val)
+{
+ t3_write_reg(adapter, addr, val);
+ t3_read_reg(adapter, addr); /* flush */
+ if (!(t3_read_reg(adapter, addr) & F_BUSY))
+ return 0;
+ CH_ERR(adapter, "write to MC7 register 0x%x timed out\n", addr);
+ return -EIO;
+}
+
+static int mc7_init(struct mc7 *mc7, unsigned int mc7_clock, int mem_type)
+{
+ static const unsigned int mc7_mode[] = {
+ 0x632, 0x642, 0x652, 0x432, 0x442
+ };
+ static const struct mc7_timing_params mc7_timings[] = {
+ {12, 3, 4, {20, 28, 34, 52, 0}, 15, 6, 4},
+ {12, 4, 5, {20, 28, 34, 52, 0}, 16, 7, 4},
+ {12, 5, 6, {20, 28, 34, 52, 0}, 17, 8, 4},
+ {9, 3, 4, {15, 21, 26, 39, 0}, 12, 6, 4},
+ {9, 4, 5, {15, 21, 26, 39, 0}, 13, 7, 4}
+ };
+
+ u32 val;
+ unsigned int width, density, slow, attempts;
+ struct adapter *adapter = mc7->adapter;
+ const struct mc7_timing_params *p = &mc7_timings[mem_type];
+
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
+ slow = val & F_SLOW;
+ width = G_WIDTH(val);
+ density = G_DEN(val);
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_CFG, val | F_IFEN);
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */
+ msleep(1);
+
+ if (!slow) {
+ t3_write_reg(adapter, mc7->offset + A_MC7_CAL, F_SGL_CAL_EN);
+ t3_read_reg(adapter, mc7->offset + A_MC7_CAL);
+ msleep(1);
+ if (t3_read_reg(adapter, mc7->offset + A_MC7_CAL) &
+ (F_BUSY | F_SGL_CAL_EN | F_CAL_FAULT)) {
+ CH_ERR(adapter, "%s MC7 calibration timed out\n",
+ mc7->name);
+ goto out_fail;
+ }
+ }
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_PARM,
+ V_ACTTOPREDLY(p->ActToPreDly) |
+ V_ACTTORDWRDLY(p->ActToRdWrDly) | V_PRECYC(p->PreCyc) |
+ V_REFCYC(p->RefCyc[density]) | V_BKCYC(p->BkCyc) |
+ V_WRTORDDLY(p->WrToRdDly) | V_RDTOWRDLY(p->RdToWrDly));
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_CFG,
+ val | F_CLKEN | F_TERM150);
+ t3_read_reg(adapter, mc7->offset + A_MC7_CFG); /* flush */
+
+ if (!slow)
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLENB,
+ F_DLLENB);
+ udelay(1);
+
+ val = slow ? 3 : 6;
+ if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE2, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE3, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val))
+ goto out_fail;
+
+ if (!slow) {
+ t3_write_reg(adapter, mc7->offset + A_MC7_MODE, 0x100);
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_DLL, F_DLLRST, 0);
+ udelay(5);
+ }
+
+ if (wrreg_wait(adapter, mc7->offset + A_MC7_PRE, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_REF, 0) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_MODE,
+ mc7_mode[mem_type]) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val | 0x380) ||
+ wrreg_wait(adapter, mc7->offset + A_MC7_EXT_MODE1, val))
+ goto out_fail;
+
+ /* clock value is in KHz */
+ mc7_clock = mc7_clock * 7812 + mc7_clock / 2; /* ns */
+ mc7_clock /= 1000000; /* KHz->MHz, ns->us */
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_REF,
+ F_PERREFEN | V_PREREFDIV(mc7_clock));
+ t3_read_reg(adapter, mc7->offset + A_MC7_REF); /* flush */
+
+ t3_write_reg(adapter, mc7->offset + A_MC7_ECC, F_ECCGENEN | F_ECCCHKEN);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_DATA, 0);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_BEG, 0);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_ADDR_END,
+ (mc7->size << width) - 1);
+ t3_write_reg(adapter, mc7->offset + A_MC7_BIST_OP, V_OP(1));
+ t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP); /* flush */
+
+ attempts = 50;
+ do {
+ msleep(250);
+ val = t3_read_reg(adapter, mc7->offset + A_MC7_BIST_OP);
+ } while ((val & F_BUSY) && --attempts);
+ if (val & F_BUSY) {
+ CH_ERR(adapter, "%s MC7 BIST timed out\n", mc7->name);
+ goto out_fail;
+ }
+
+ /* Enable normal memory accesses. */
+ t3_set_reg_field(adapter, mc7->offset + A_MC7_CFG, 0, F_RDY);
+ return 0;
+
+out_fail:
+ return -1;
+}
+
+static void config_pcie(struct adapter *adap)
+{
+ static const u16 ack_lat[4][6] = {
+ {237, 416, 559, 1071, 2095, 4143},
+ {128, 217, 289, 545, 1057, 2081},
+ {73, 118, 154, 282, 538, 1050},
+ {67, 107, 86, 150, 278, 534}
+ };
+ static const u16 rpl_tmr[4][6] = {
+ {711, 1248, 1677, 3213, 6285, 12429},
+ {384, 651, 867, 1635, 3171, 6243},
+ {219, 354, 462, 846, 1614, 3150},
+ {201, 321, 258, 450, 834, 1602}
+ };
+
+ u16 val;
+ unsigned int log2_width, pldsize;
+ unsigned int fst_trn_rx, fst_trn_tx, acklat, rpllmt;
+
+ pci_read_config_word(adap->pdev,
+ adap->params.pci.pcie_cap_addr + PCI_EXP_DEVCTL,
+ &val);
+ pldsize = (val & PCI_EXP_DEVCTL_PAYLOAD) >> 5;
+ pci_read_config_word(adap->pdev,
+ adap->params.pci.pcie_cap_addr + PCI_EXP_LNKCTL,
+ &val);
+
+ fst_trn_tx = G_NUMFSTTRNSEQ(t3_read_reg(adap, A_PCIE_PEX_CTRL0));
+ fst_trn_rx = adap->params.rev == 0 ? fst_trn_tx :
+ G_NUMFSTTRNSEQRX(t3_read_reg(adap, A_PCIE_MODE));
+ log2_width = fls(adap->params.pci.width) - 1;
+ acklat = ack_lat[log2_width][pldsize];
+ if (val & 1) /* check LOsEnable */
+ acklat += fst_trn_tx * 4;
+ rpllmt = rpl_tmr[log2_width][pldsize] + fst_trn_rx * 4;
+
+ if (adap->params.rev == 0)
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL1,
+ V_T3A_ACKLAT(M_T3A_ACKLAT),
+ V_T3A_ACKLAT(acklat));
+ else
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL1, V_ACKLAT(M_ACKLAT),
+ V_ACKLAT(acklat));
+
+ t3_set_reg_field(adap, A_PCIE_PEX_CTRL0, V_REPLAYLMT(M_REPLAYLMT),
+ V_REPLAYLMT(rpllmt));
+
+ t3_write_reg(adap, A_PCIE_PEX_ERR, 0xffffffff);
+ t3_set_reg_field(adap, A_PCIE_CFG, F_PCIE_CLIDECEN, F_PCIE_CLIDECEN);
+}
+
+/*
+ * Initialize and configure T3 HW modules. This performs the
+ * initialization steps that need to be done once after a card is reset.
+ * MAC and PHY initialization is handled separarely whenever a port is enabled.
+ *
+ * fw_params are passed to FW and their value is platform dependent. Only the
+ * top 8 bits are available for use, the rest must be 0.
+ */
+int t3_init_hw(struct adapter *adapter, u32 fw_params)
+{
+ int err = -EIO, attempts = 100;
+ const struct vpd_params *vpd = &adapter->params.vpd;
+
+ if (adapter->params.rev > 0)
+ calibrate_xgm_t3b(adapter);
+ else if (calibrate_xgm(adapter))
+ goto out_err;
+
+ if (vpd->mclk) {
+ partition_mem(adapter, &adapter->params.tp);
+
+ if (mc7_init(&adapter->pmrx, vpd->mclk, vpd->mem_timing) ||
+ mc7_init(&adapter->pmtx, vpd->mclk, vpd->mem_timing) ||
+ mc7_init(&adapter->cm, vpd->mclk, vpd->mem_timing) ||
+ t3_mc5_init(&adapter->mc5, adapter->params.mc5.nservers,
+ adapter->params.mc5.nfilters,
+ adapter->params.mc5.nroutes))
+ goto out_err;
+ }
+
+ if (tp_init(adapter, &adapter->params.tp))
+ goto out_err;
+
+ t3_tp_set_coalescing_size(adapter,
+ min(adapter->params.sge.max_pkt_size,
+ MAX_RX_COALESCING_LEN), 1);
+ t3_tp_set_max_rxsize(adapter,
+ min(adapter->params.sge.max_pkt_size, 16384U));
+ ulp_config(adapter, &adapter->params.tp);
+
+ if (is_pcie(adapter))
+ config_pcie(adapter);
+ else
+ t3_set_reg_field(adapter, A_PCIX_CFG, 0, F_CLIDECEN);
+
+ t3_write_reg(adapter, A_PM1_RX_CFG, 0xf000f000);
+ init_hw_for_avail_ports(adapter, adapter->params.nports);
+ t3_sge_init(adapter, &adapter->params.sge);
+
+ t3_write_reg(adapter, A_CIM_HOST_ACC_DATA, vpd->uclk | fw_params);
+ t3_write_reg(adapter, A_CIM_BOOT_CFG,
+ V_BOOTADDR(FW_FLASH_BOOT_ADDR >> 2));
+ t3_read_reg(adapter, A_CIM_BOOT_CFG); /* flush */
+
+ do { /* wait for uP to initialize */
+ msleep(20);
+ } while (t3_read_reg(adapter, A_CIM_HOST_ACC_DATA) && --attempts);
+ if (!attempts)
+ goto out_err;
+
+ err = 0;
+out_err:
+ return err;
+}
+
+/**
+ * get_pci_mode - determine a card's PCI mode
+ * @adapter: the adapter
+ * @p: where to store the PCI settings
+ *
+ * Determines a card's PCI mode and associated parameters, such as speed
+ * and width.
+ */
+static void __devinit get_pci_mode(struct adapter *adapter,
+ struct pci_params *p)
+{
+ static unsigned short speed_map[] = { 33, 66, 100, 133 };
+ u32 pci_mode, pcie_cap;
+
+ pcie_cap = pci_find_capability(adapter->pdev, PCI_CAP_ID_EXP);
+ if (pcie_cap) {
+ u16 val;
+
+ p->variant = PCI_VARIANT_PCIE;
+ p->pcie_cap_addr = pcie_cap;
+ pci_read_config_word(adapter->pdev, pcie_cap + PCI_EXP_LNKSTA,
+ &val);
+ p->width = (val >> 4) & 0x3f;
+ return;
+ }
+
+ pci_mode = t3_read_reg(adapter, A_PCIX_MODE);
+ p->speed = speed_map[G_PCLKRANGE(pci_mode)];
+ p->width = (pci_mode & F_64BIT) ? 64 : 32;
+ pci_mode = G_PCIXINITPAT(pci_mode);
+ if (pci_mode == 0)
+ p->variant = PCI_VARIANT_PCI;
+ else if (pci_mode < 4)
+ p->variant = PCI_VARIANT_PCIX_MODE1_PARITY;
+ else if (pci_mode < 8)
+ p->variant = PCI_VARIANT_PCIX_MODE1_ECC;
+ else
+ p->variant = PCI_VARIANT_PCIX_266_MODE2;
+}
+
+/**
+ * init_link_config - initialize a link's SW state
+ * @lc: structure holding the link state
+ * @ai: information about the current card
+ *
+ * Initializes the SW state maintained for each link, including the link's
+ * capabilities and default speed/duplex/flow-control/autonegotiation
+ * settings.
+ */
+static void __devinit init_link_config(struct link_config *lc,
+ unsigned int caps)
+{
+ lc->supported = caps;
+ lc->requested_speed = lc->speed = SPEED_INVALID;
+ lc->requested_duplex = lc->duplex = DUPLEX_INVALID;
+ lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;
+ if (lc->supported & SUPPORTED_Autoneg) {
+ lc->advertising = lc->supported;
+ lc->autoneg = AUTONEG_ENABLE;
+ lc->requested_fc |= PAUSE_AUTONEG;
+ } else {
+ lc->advertising = 0;
+ lc->autoneg = AUTONEG_DISABLE;
+ }
+}
+
+/**
+ * mc7_calc_size - calculate MC7 memory size
+ * @cfg: the MC7 configuration
+ *
+ * Calculates the size of an MC7 memory in bytes from the value of its
+ * configuration register.
+ */
+static unsigned int __devinit mc7_calc_size(u32 cfg)
+{
+ unsigned int width = G_WIDTH(cfg);
+ unsigned int banks = !!(cfg & F_BKS) + 1;
+ unsigned int org = !!(cfg & F_ORG) + 1;
+ unsigned int density = G_DEN(cfg);
+ unsigned int MBs = ((256 << density) * banks) / (org << width);
+
+ return MBs << 20;
+}
+
+static void __devinit mc7_prep(struct adapter *adapter, struct mc7 *mc7,
+ unsigned int base_addr, const char *name)
+{
+ u32 cfg;
+
+ mc7->adapter = adapter;
+ mc7->name = name;
+ mc7->offset = base_addr - MC7_PMRX_BASE_ADDR;
+ cfg = t3_read_reg(adapter, mc7->offset + A_MC7_CFG);
+ mc7->size = mc7_calc_size(cfg);
+ mc7->width = G_WIDTH(cfg);
+}
+
+void mac_prep(struct cmac *mac, struct adapter *adapter, int index)
+{
+ mac->adapter = adapter;
+ mac->offset = (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR) * index;
+ mac->nucast = 1;
+
+ if (adapter->params.rev == 0 && uses_xaui(adapter)) {
+ t3_write_reg(adapter, A_XGM_SERDES_CTRL + mac->offset,
+ is_10G(adapter) ? 0x2901c04 : 0x2301c04);
+ t3_set_reg_field(adapter, A_XGM_PORT_CFG + mac->offset,
+ F_ENRGMII, 0);
+ }
+}
+
+void early_hw_init(struct adapter *adapter, const struct adapter_info *ai)
+{
+ u32 val = V_PORTSPEED(is_10G(adapter) ? 3 : 2);
+
+ mi1_init(adapter, ai);
+ t3_write_reg(adapter, A_I2C_CFG, /* set for 80KHz */
+ V_I2C_CLKDIV(adapter->params.vpd.cclk / 80 - 1));
+ t3_write_reg(adapter, A_T3DBG_GPIO_EN,
+ ai->gpio_out | F_GPIO0_OEN | F_GPIO0_OUT_VAL);
+
+ if (adapter->params.rev == 0 || !uses_xaui(adapter))
+ val |= F_ENRGMII;
+
+ /* Enable MAC clocks so we can access the registers */
+ t3_write_reg(adapter, A_XGM_PORT_CFG, val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+
+ val |= F_CLKDIVRESET_;
+ t3_write_reg(adapter, A_XGM_PORT_CFG, val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+ t3_write_reg(adapter, XGM_REG(A_XGM_PORT_CFG, 1), val);
+ t3_read_reg(adapter, A_XGM_PORT_CFG);
+}
+
+/*
+ * Reset the adapter. PCIe cards lose their config space during reset, PCI-X
+ * ones don't.
+ */
+int t3_reset_adapter(struct adapter *adapter)
+{
+ int i;
+ uint16_t devid = 0;
+
+ if (is_pcie(adapter))
+ pci_save_state(adapter->pdev);
+ t3_write_reg(adapter, A_PL_RST, F_CRSTWRM | F_CRSTWRMMODE);
+
+ /*
+ * Delay. Give Some time to device to reset fully.
+ * XXX The delay time should be modified.
+ */
+ for (i = 0; i < 10; i++) {
+ msleep(50);
+ pci_read_config_word(adapter->pdev, 0x00, &devid);
+ if (devid == 0x1425)
+ break;
+ }
+
+ if (devid != 0x1425)
+ return -1;
+
+ if (is_pcie(adapter))
+ pci_restore_state(adapter->pdev);
+ return 0;
+}
+
+/*
+ * Initialize adapter SW state for the various HW modules, set initial values
+ * for some adapter tunables, take PHYs out of reset, and initialize the MDIO
+ * interface.
+ */
+int __devinit t3_prep_adapter(struct adapter *adapter,
+ const struct adapter_info *ai, int reset)
+{
+ int ret;
+ unsigned int i, j = 0;
+
+ get_pci_mode(adapter, &adapter->params.pci);
+
+ adapter->params.info = ai;
+ adapter->params.nports = ai->nports;
+ adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
+ adapter->params.linkpoll_period = 0;
+ adapter->params.stats_update_period = is_10G(adapter) ?
+ MAC_STATS_ACCUM_SECS : (MAC_STATS_ACCUM_SECS * 10);
+ adapter->params.pci.vpd_cap_addr =
+ pci_find_capability(adapter->pdev, PCI_CAP_ID_VPD);
+ ret = get_vpd_params(adapter, &adapter->params.vpd);
+ if (ret < 0)
+ return ret;
+
+ if (reset && t3_reset_adapter(adapter))
+ return -1;
+
+ t3_sge_prep(adapter, &adapter->params.sge);
+
+ if (adapter->params.vpd.mclk) {
+ struct tp_params *p = &adapter->params.tp;
+
+ mc7_prep(adapter, &adapter->pmrx, MC7_PMRX_BASE_ADDR, "PMRX");
+ mc7_prep(adapter, &adapter->pmtx, MC7_PMTX_BASE_ADDR, "PMTX");
+ mc7_prep(adapter, &adapter->cm, MC7_CM_BASE_ADDR, "CM");
+
+ p->nchan = ai->nports;
+ p->pmrx_size = t3_mc7_size(&adapter->pmrx);
+ p->pmtx_size = t3_mc7_size(&adapter->pmtx);
+ p->cm_size = t3_mc7_size(&adapter->cm);
+ p->chan_rx_size = p->pmrx_size / 2; /* only 1 Rx channel */
+ p->chan_tx_size = p->pmtx_size / p->nchan;
+ p->rx_pg_size = 64 * 1024;
+ p->tx_pg_size = is_10G(adapter) ? 64 * 1024 : 16 * 1024;
+ p->rx_num_pgs = pm_num_pages(p->chan_rx_size, p->rx_pg_size);
+ p->tx_num_pgs = pm_num_pages(p->chan_tx_size, p->tx_pg_size);
+ p->ntimer_qs = p->cm_size >= (128 << 20) ||
+ adapter->params.rev > 0 ? 12 : 6;
+
+ adapter->params.mc5.nservers = DEFAULT_NSERVERS;
+ adapter->params.mc5.nfilters = adapter->params.rev > 0 ?
+ DEFAULT_NFILTERS : 0;
+ adapter->params.mc5.nroutes = 0;
+ t3_mc5_prep(adapter, &adapter->mc5, MC5_MODE_144_BIT);
+
+ init_mtus(adapter->params.mtus);
+ init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);
+ }
+
+ early_hw_init(adapter, ai);
+
+ for_each_port(adapter, i) {
+ u8 hw_addr[6];
+ struct port_info *p = adap2pinfo(adapter, i);
+
+ while (!adapter->params.vpd.port_type[j])
+ ++j;
+
+ p->port_type = &port_types[adapter->params.vpd.port_type[j]];
+ p->port_type->phy_prep(&p->phy, adapter, ai->phy_base_addr + j,
+ ai->mdio_ops);
+ mac_prep(&p->mac, adapter, j);
+ ++j;
+
+ /*
+ * The VPD EEPROM stores the base Ethernet address for the
+ * card. A port's address is derived from the base by adding
+ * the port's index to the base's low octet.
+ */
+ memcpy(hw_addr, adapter->params.vpd.eth_base, 5);
+ hw_addr[5] = adapter->params.vpd.eth_base[5] + i;
+
+ memcpy(adapter->port[i]->dev_addr, hw_addr,
+ ETH_ALEN);
+ memcpy(adapter->port[i]->perm_addr, hw_addr,
+ ETH_ALEN);
+ init_link_config(&p->link_config, p->port_type->caps);
+ p->phy.ops->power_down(&p->phy, 1);
+ if (!(p->port_type->caps & SUPPORTED_IRQ))
+ adapter->params.linkpoll_period = 10;
+ }
+
+ return 0;
+}
+
+void t3_led_ready(struct adapter *adapter)
+{
+ t3_set_reg_field(adapter, A_T3DBG_GPIO_EN, F_GPIO0_OUT_VAL,
+ F_GPIO0_OUT_VAL);
+}
--- /dev/null
+/*
+ * Copyright (C) 2006-2007 Chelsio Communications. All rights reserved.
+ * Copyright (C) 2006-2007 Open Grid Computing, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _T3CDEV_H_
+#define _T3CDEV_H_
+
+#include <linux/list.h>
+#include <asm/atomic.h>
+#include <asm/semaphore.h>
+#include <linux/netdevice.h>
+#include <linux/proc_fs.h>
+#include <linux/skbuff.h>
+#include <net/neighbour.h>
+
+#define T3CNAMSIZ 16
+
+/* Get the t3cdev associated with a net_device */
+#define T3CDEV(netdev) (struct t3cdev *)(netdev->priv)
+
+struct cxgb3_client;
+
+enum t3ctype {
+ T3A = 0,
+ T3B
+};
+
+struct t3cdev {
+ char name[T3CNAMSIZ]; /* T3C device name */
+ enum t3ctype type;
+ struct list_head ofld_dev_list; /* for list linking */
+ struct net_device *lldev; /* LL dev associated with T3C messages */
+ struct proc_dir_entry *proc_dir; /* root of proc dir for this T3C */
+ int (*send)(struct t3cdev *dev, struct sk_buff *skb);
+ int (*recv)(struct t3cdev *dev, struct sk_buff **skb, int n);
+ int (*ctl)(struct t3cdev *dev, unsigned int req, void *data);
+ void (*neigh_update)(struct t3cdev *dev, struct neighbour *neigh);
+ void *priv; /* driver private data */
+ void *l2opt; /* optional layer 2 data */
+ void *l3opt; /* optional layer 3 data */
+ void *l4opt; /* optional layer 4 data */
+ void *ulp; /* ulp stuff */
+};
+
+#endif /* _T3CDEV_H_ */
--- /dev/null
+/*
+ * Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+/* $Date: 2006/10/31 18:57:51 $ $RCSfile: version.h,v $ $Revision: 1.3 $ */
+#ifndef __CHELSIO_VERSION_H
+#define __CHELSIO_VERSION_H
+#define DRV_DESC "Chelsio T3 Network Driver"
+#define DRV_NAME "cxgb3"
+/* Driver version */
+#define DRV_VERSION "1.0"
+#endif /* __CHELSIO_VERSION_H */
--- /dev/null
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+
+/* VSC8211 PHY specific registers. */
+enum {
+ VSC8211_INTR_ENABLE = 25,
+ VSC8211_INTR_STATUS = 26,
+ VSC8211_AUX_CTRL_STAT = 28,
+};
+
+enum {
+ VSC_INTR_RX_ERR = 1 << 0,
+ VSC_INTR_MS_ERR = 1 << 1, /* master/slave resolution error */
+ VSC_INTR_CABLE = 1 << 2, /* cable impairment */
+ VSC_INTR_FALSE_CARR = 1 << 3, /* false carrier */
+ VSC_INTR_MEDIA_CHG = 1 << 4, /* AMS media change */
+ VSC_INTR_RX_FIFO = 1 << 5, /* Rx FIFO over/underflow */
+ VSC_INTR_TX_FIFO = 1 << 6, /* Tx FIFO over/underflow */
+ VSC_INTR_DESCRAMBL = 1 << 7, /* descrambler lock-lost */
+ VSC_INTR_SYMBOL_ERR = 1 << 8, /* symbol error */
+ VSC_INTR_NEG_DONE = 1 << 10, /* autoneg done */
+ VSC_INTR_NEG_ERR = 1 << 11, /* autoneg error */
+ VSC_INTR_LINK_CHG = 1 << 13, /* link change */
+ VSC_INTR_ENABLE = 1 << 15, /* interrupt enable */
+};
+
+#define CFG_CHG_INTR_MASK (VSC_INTR_LINK_CHG | VSC_INTR_NEG_ERR | \
+ VSC_INTR_NEG_DONE)
+#define INTR_MASK (CFG_CHG_INTR_MASK | VSC_INTR_TX_FIFO | VSC_INTR_RX_FIFO | \
+ VSC_INTR_ENABLE)
+
+/* PHY specific auxiliary control & status register fields */
+#define S_ACSR_ACTIPHY_TMR 0
+#define M_ACSR_ACTIPHY_TMR 0x3
+#define V_ACSR_ACTIPHY_TMR(x) ((x) << S_ACSR_ACTIPHY_TMR)
+
+#define S_ACSR_SPEED 3
+#define M_ACSR_SPEED 0x3
+#define G_ACSR_SPEED(x) (((x) >> S_ACSR_SPEED) & M_ACSR_SPEED)
+
+#define S_ACSR_DUPLEX 5
+#define F_ACSR_DUPLEX (1 << S_ACSR_DUPLEX)
+
+#define S_ACSR_ACTIPHY 6
+#define F_ACSR_ACTIPHY (1 << S_ACSR_ACTIPHY)
+
+/*
+ * Reset the PHY. This PHY completes reset immediately so we never wait.
+ */
+static int vsc8211_reset(struct cphy *cphy, int wait)
+{
+ return t3_phy_reset(cphy, 0, 0);
+}
+
+static int vsc8211_intr_enable(struct cphy *cphy)
+{
+ return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, INTR_MASK);
+}
+
+static int vsc8211_intr_disable(struct cphy *cphy)
+{
+ return mdio_write(cphy, 0, VSC8211_INTR_ENABLE, 0);
+}
+
+static int vsc8211_intr_clear(struct cphy *cphy)
+{
+ u32 val;
+
+ /* Clear PHY interrupts by reading the register. */
+ return mdio_read(cphy, 0, VSC8211_INTR_STATUS, &val);
+}
+
+static int vsc8211_autoneg_enable(struct cphy *cphy)
+{
+ return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+ BMCR_ANENABLE | BMCR_ANRESTART);
+}
+
+static int vsc8211_autoneg_restart(struct cphy *cphy)
+{
+ return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN | BMCR_ISOLATE,
+ BMCR_ANRESTART);
+}
+
+static int vsc8211_get_link_status(struct cphy *cphy, int *link_ok,
+ int *speed, int *duplex, int *fc)
+{
+ unsigned int bmcr, status, lpa, adv;
+ int err, sp = -1, dplx = -1, pause = 0;
+
+ err = mdio_read(cphy, 0, MII_BMCR, &bmcr);
+ if (!err)
+ err = mdio_read(cphy, 0, MII_BMSR, &status);
+ if (err)
+ return err;
+
+ if (link_ok) {
+ /*
+ * BMSR_LSTATUS is latch-low, so if it is 0 we need to read it
+ * once more to get the current link state.
+ */
+ if (!(status & BMSR_LSTATUS))
+ err = mdio_read(cphy, 0, MII_BMSR, &status);
+ if (err)
+ return err;
+ *link_ok = (status & BMSR_LSTATUS) != 0;
+ }
+ if (!(bmcr & BMCR_ANENABLE)) {
+ dplx = (bmcr & BMCR_FULLDPLX) ? DUPLEX_FULL : DUPLEX_HALF;
+ if (bmcr & BMCR_SPEED1000)
+ sp = SPEED_1000;
+ else if (bmcr & BMCR_SPEED100)
+ sp = SPEED_100;
+ else
+ sp = SPEED_10;
+ } else if (status & BMSR_ANEGCOMPLETE) {
+ err = mdio_read(cphy, 0, VSC8211_AUX_CTRL_STAT, &status);
+ if (err)
+ return err;
+
+ dplx = (status & F_ACSR_DUPLEX) ? DUPLEX_FULL : DUPLEX_HALF;
+ sp = G_ACSR_SPEED(status);
+ if (sp == 0)
+ sp = SPEED_10;
+ else if (sp == 1)
+ sp = SPEED_100;
+ else
+ sp = SPEED_1000;
+
+ if (fc && dplx == DUPLEX_FULL) {
+ err = mdio_read(cphy, 0, MII_LPA, &lpa);
+ if (!err)
+ err = mdio_read(cphy, 0, MII_ADVERTISE, &adv);
+ if (err)
+ return err;
+
+ if (lpa & adv & ADVERTISE_PAUSE_CAP)
+ pause = PAUSE_RX | PAUSE_TX;
+ else if ((lpa & ADVERTISE_PAUSE_CAP) &&
+ (lpa & ADVERTISE_PAUSE_ASYM) &&
+ (adv & ADVERTISE_PAUSE_ASYM))
+ pause = PAUSE_TX;
+ else if ((lpa & ADVERTISE_PAUSE_ASYM) &&
+ (adv & ADVERTISE_PAUSE_CAP))
+ pause = PAUSE_RX;
+ }
+ }
+ if (speed)
+ *speed = sp;
+ if (duplex)
+ *duplex = dplx;
+ if (fc)
+ *fc = pause;
+ return 0;
+}
+
+static int vsc8211_power_down(struct cphy *cphy, int enable)
+{
+ return t3_mdio_change_bits(cphy, 0, MII_BMCR, BMCR_PDOWN,
+ enable ? BMCR_PDOWN : 0);
+}
+
+static int vsc8211_intr_handler(struct cphy *cphy)
+{
+ unsigned int cause;
+ int err, cphy_cause = 0;
+
+ err = mdio_read(cphy, 0, VSC8211_INTR_STATUS, &cause);
+ if (err)
+ return err;
+
+ cause &= INTR_MASK;
+ if (cause & CFG_CHG_INTR_MASK)
+ cphy_cause |= cphy_cause_link_change;
+ if (cause & (VSC_INTR_RX_FIFO | VSC_INTR_TX_FIFO))
+ cphy_cause |= cphy_cause_fifo_error;
+ return cphy_cause;
+}
+
+static struct cphy_ops vsc8211_ops = {
+ .reset = vsc8211_reset,
+ .intr_enable = vsc8211_intr_enable,
+ .intr_disable = vsc8211_intr_disable,
+ .intr_clear = vsc8211_intr_clear,
+ .intr_handler = vsc8211_intr_handler,
+ .autoneg_enable = vsc8211_autoneg_enable,
+ .autoneg_restart = vsc8211_autoneg_restart,
+ .advertise = t3_phy_advertise,
+ .set_speed_duplex = t3_set_phy_speed_duplex,
+ .get_link_status = vsc8211_get_link_status,
+ .power_down = vsc8211_power_down,
+};
+
+void t3_vsc8211_phy_prep(struct cphy *phy, struct adapter *adapter,
+ int phy_addr, const struct mdio_ops *mdio_ops)
+{
+ cphy_init(phy, adapter, phy_addr, &vsc8211_ops, mdio_ops);
+}
--- /dev/null
+/*
+ * Copyright (c) 2005-2007 Chelsio, Inc. All rights reserved.
+ *
+ * This software is available to you under a choice of one of two
+ * licenses. You may choose to be licensed under the terms of the GNU
+ * General Public License (GPL) Version 2, available from the file
+ * COPYING in the main directory of this source tree, or the
+ * OpenIB.org BSD license below:
+ *
+ * Redistribution and use in source and binary forms, with or
+ * without modification, are permitted provided that the following
+ * conditions are met:
+ *
+ * - Redistributions of source code must retain the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer.
+ *
+ * - Redistributions in binary form must reproduce the above
+ * copyright notice, this list of conditions and the following
+ * disclaimer in the documentation and/or other materials
+ * provided with the distribution.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include "common.h"
+#include "regs.h"
+
+/*
+ * # of exact address filters. The first one is used for the station address,
+ * the rest are available for multicast addresses.
+ */
+#define EXACT_ADDR_FILTERS 8
+
+static inline int macidx(const struct cmac *mac)
+{
+ return mac->offset / (XGMAC0_1_BASE_ADDR - XGMAC0_0_BASE_ADDR);
+}
+
+static void xaui_serdes_reset(struct cmac *mac)
+{
+ static const unsigned int clear[] = {
+ F_PWRDN0 | F_PWRDN1, F_RESETPLL01, F_RESET0 | F_RESET1,
+ F_PWRDN2 | F_PWRDN3, F_RESETPLL23, F_RESET2 | F_RESET3
+ };
+
+ int i;
+ struct adapter *adap = mac->adapter;
+ u32 ctrl = A_XGM_SERDES_CTRL0 + mac->offset;
+
+ t3_write_reg(adap, ctrl, adap->params.vpd.xauicfg[macidx(mac)] |
+ F_RESET3 | F_RESET2 | F_RESET1 | F_RESET0 |
+ F_PWRDN3 | F_PWRDN2 | F_PWRDN1 | F_PWRDN0 |
+ F_RESETPLL23 | F_RESETPLL01);
+ t3_read_reg(adap, ctrl);
+ udelay(15);
+
+ for (i = 0; i < ARRAY_SIZE(clear); i++) {
+ t3_set_reg_field(adap, ctrl, clear[i], 0);
+ udelay(15);
+ }
+}
+
+void t3b_pcs_reset(struct cmac *mac)
+{
+ t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset,
+ F_PCS_RESET_, 0);
+ udelay(20);
+ t3_set_reg_field(mac->adapter, A_XGM_RESET_CTRL + mac->offset, 0,
+ F_PCS_RESET_);
+}
+
+int t3_mac_reset(struct cmac *mac)
+{
+ static const struct addr_val_pair mac_reset_avp[] = {
+ {A_XGM_TX_CTRL, 0},
+ {A_XGM_RX_CTRL, 0},
+ {A_XGM_RX_CFG, F_DISPAUSEFRAMES | F_EN1536BFRAMES |
+ F_RMFCS | F_ENJUMBO | F_ENHASHMCAST},
+ {A_XGM_RX_HASH_LOW, 0},
+ {A_XGM_RX_HASH_HIGH, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_1, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_2, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_3, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_4, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_5, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_6, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_7, 0},
+ {A_XGM_RX_EXACT_MATCH_LOW_8, 0},
+ {A_XGM_STAT_CTRL, F_CLRSTATS}
+ };
+ u32 val;
+ struct adapter *adap = mac->adapter;
+ unsigned int oft = mac->offset;
+
+ t3_write_reg(adap, A_XGM_RESET_CTRL + oft, F_MAC_RESET_);
+ t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */
+
+ t3_write_regs(adap, mac_reset_avp, ARRAY_SIZE(mac_reset_avp), oft);
+ t3_set_reg_field(adap, A_XGM_RXFIFO_CFG + oft,
+ F_RXSTRFRWRD | F_DISERRFRAMES,
+ uses_xaui(adap) ? 0 : F_RXSTRFRWRD);
+
+ if (uses_xaui(adap)) {
+ if (adap->params.rev == 0) {
+ t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0,
+ F_RXENABLE | F_TXENABLE);
+ if (t3_wait_op_done(adap, A_XGM_SERDES_STATUS1 + oft,
+ F_CMULOCK, 1, 5, 2)) {
+ CH_ERR(adap,
+ "MAC %d XAUI SERDES CMU lock failed\n",
+ macidx(mac));
+ return -1;
+ }
+ t3_set_reg_field(adap, A_XGM_SERDES_CTRL + oft, 0,
+ F_SERDESRESET_);
+ } else
+ xaui_serdes_reset(mac);
+ }
+
+ if (adap->params.rev > 0)
+ t3_write_reg(adap, A_XGM_PAUSE_TIMER + oft, 0xf000);
+
+ val = F_MAC_RESET_;
+ if (is_10G(adap))
+ val |= F_PCS_RESET_;
+ else if (uses_xaui(adap))
+ val |= F_PCS_RESET_ | F_XG2G_RESET_;
+ else
+ val |= F_RGMII_RESET_ | F_XG2G_RESET_;
+ t3_write_reg(adap, A_XGM_RESET_CTRL + oft, val);
+ t3_read_reg(adap, A_XGM_RESET_CTRL + oft); /* flush */
+ if ((val & F_PCS_RESET_) && adap->params.rev) {
+ msleep(1);
+ t3b_pcs_reset(mac);
+ }
+
+ memset(&mac->stats, 0, sizeof(mac->stats));
+ return 0;
+}
+
+/*
+ * Set the exact match register 'idx' to recognize the given Ethernet address.
+ */
+static void set_addr_filter(struct cmac *mac, int idx, const u8 * addr)
+{
+ u32 addr_lo, addr_hi;
+ unsigned int oft = mac->offset + idx * 8;
+
+ addr_lo = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0];
+ addr_hi = (addr[5] << 8) | addr[4];
+
+ t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_LOW_1 + oft, addr_lo);
+ t3_write_reg(mac->adapter, A_XGM_RX_EXACT_MATCH_HIGH_1 + oft, addr_hi);
+}
+
+/* Set one of the station's unicast MAC addresses. */
+int t3_mac_set_address(struct cmac *mac, unsigned int idx, u8 addr[6])
+{
+ if (idx >= mac->nucast)
+ return -EINVAL;
+ set_addr_filter(mac, idx, addr);
+ return 0;
+}
+
+/*
+ * Specify the number of exact address filters that should be reserved for
+ * unicast addresses. Caller should reload the unicast and multicast addresses
+ * after calling this.
+ */
+int t3_mac_set_num_ucast(struct cmac *mac, int n)
+{
+ if (n > EXACT_ADDR_FILTERS)
+ return -EINVAL;
+ mac->nucast = n;
+ return 0;
+}
+
+/* Calculate the RX hash filter index of an Ethernet address */
+static int hash_hw_addr(const u8 * addr)
+{
+ int hash = 0, octet, bit, i = 0, c;
+
+ for (octet = 0; octet < 6; ++octet)
+ for (c = addr[octet], bit = 0; bit < 8; c >>= 1, ++bit) {
+ hash ^= (c & 1) << i;
+ if (++i == 6)
+ i = 0;
+ }
+ return hash;
+}
+
+int t3_mac_set_rx_mode(struct cmac *mac, struct t3_rx_mode *rm)
+{
+ u32 val, hash_lo, hash_hi;
+ struct adapter *adap = mac->adapter;
+ unsigned int oft = mac->offset;
+
+ val = t3_read_reg(adap, A_XGM_RX_CFG + oft) & ~F_COPYALLFRAMES;
+ if (rm->dev->flags & IFF_PROMISC)
+ val |= F_COPYALLFRAMES;
+ t3_write_reg(adap, A_XGM_RX_CFG + oft, val);
+
+ if (rm->dev->flags & IFF_ALLMULTI)
+ hash_lo = hash_hi = 0xffffffff;
+ else {
+ u8 *addr;
+ int exact_addr_idx = mac->nucast;
+
+ hash_lo = hash_hi = 0;
+ while ((addr = t3_get_next_mcaddr(rm)))
+ if (exact_addr_idx < EXACT_ADDR_FILTERS)
+ set_addr_filter(mac, exact_addr_idx++, addr);
+ else {
+ int hash = hash_hw_addr(addr);
+
+ if (hash < 32)
+ hash_lo |= (1 << hash);
+ else
+ hash_hi |= (1 << (hash - 32));
+ }
+ }
+
+ t3_write_reg(adap, A_XGM_RX_HASH_LOW + oft, hash_lo);
+ t3_write_reg(adap, A_XGM_RX_HASH_HIGH + oft, hash_hi);
+ return 0;
+}
+
+int t3_mac_set_mtu(struct cmac *mac, unsigned int mtu)
+{
+ int hwm, lwm;
+ unsigned int thres, v;
+ struct adapter *adap = mac->adapter;
+
+ /*
+ * MAX_FRAME_SIZE inludes header + FCS, mtu doesn't. The HW max
+ * packet size register includes header, but not FCS.
+ */
+ mtu += 14;
+ if (mtu > MAX_FRAME_SIZE - 4)
+ return -EINVAL;
+ t3_write_reg(adap, A_XGM_RX_MAX_PKT_SIZE + mac->offset, mtu);
+
+ /*
+ * Adjust the PAUSE frame watermarks. We always set the LWM, and the
+ * HWM only if flow-control is enabled.
+ */
+ hwm = max(MAC_RXFIFO_SIZE - 3 * mtu, MAC_RXFIFO_SIZE / 2U);
+ hwm = min(hwm, 3 * MAC_RXFIFO_SIZE / 4 + 1024);
+ lwm = hwm - 1024;
+ v = t3_read_reg(adap, A_XGM_RXFIFO_CFG + mac->offset);
+ v &= ~V_RXFIFOPAUSELWM(M_RXFIFOPAUSELWM);
+ v |= V_RXFIFOPAUSELWM(lwm / 8);
+ if (G_RXFIFOPAUSEHWM(v))
+ v = (v & ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM)) |
+ V_RXFIFOPAUSEHWM(hwm / 8);
+ t3_write_reg(adap, A_XGM_RXFIFO_CFG + mac->offset, v);
+
+ /* Adjust the TX FIFO threshold based on the MTU */
+ thres = (adap->params.vpd.cclk * 1000) / 15625;
+ thres = (thres * mtu) / 1000;
+ if (is_10G(adap))
+ thres /= 10;
+ thres = mtu > thres ? (mtu - thres + 7) / 8 : 0;
+ thres = max(thres, 8U); /* need at least 8 */
+ t3_set_reg_field(adap, A_XGM_TXFIFO_CFG + mac->offset,
+ V_TXFIFOTHRESH(M_TXFIFOTHRESH), V_TXFIFOTHRESH(thres));
+ return 0;
+}
+
+int t3_mac_set_speed_duplex_fc(struct cmac *mac, int speed, int duplex, int fc)
+{
+ u32 val;
+ struct adapter *adap = mac->adapter;
+ unsigned int oft = mac->offset;
+
+ if (duplex >= 0 && duplex != DUPLEX_FULL)
+ return -EINVAL;
+ if (speed >= 0) {
+ if (speed == SPEED_10)
+ val = V_PORTSPEED(0);
+ else if (speed == SPEED_100)
+ val = V_PORTSPEED(1);
+ else if (speed == SPEED_1000)
+ val = V_PORTSPEED(2);
+ else if (speed == SPEED_10000)
+ val = V_PORTSPEED(3);
+ else
+ return -EINVAL;
+
+ t3_set_reg_field(adap, A_XGM_PORT_CFG + oft,
+ V_PORTSPEED(M_PORTSPEED), val);
+ }
+
+ val = t3_read_reg(adap, A_XGM_RXFIFO_CFG + oft);
+ val &= ~V_RXFIFOPAUSEHWM(M_RXFIFOPAUSEHWM);
+ if (fc & PAUSE_TX)
+ val |= V_RXFIFOPAUSEHWM(G_RXFIFOPAUSELWM(val) + 128); /* +1KB */
+ t3_write_reg(adap, A_XGM_RXFIFO_CFG + oft, val);
+
+ t3_set_reg_field(adap, A_XGM_TX_CFG + oft, F_TXPAUSEEN,
+ (fc & PAUSE_RX) ? F_TXPAUSEEN : 0);
+ return 0;
+}
+
+int t3_mac_enable(struct cmac *mac, int which)
+{
+ int idx = macidx(mac);
+ struct adapter *adap = mac->adapter;
+ unsigned int oft = mac->offset;
+
+ if (which & MAC_DIRECTION_TX) {
+ t3_write_reg(adap, A_XGM_TX_CTRL + oft, F_TXEN);
+ t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
+ t3_write_reg(adap, A_TP_PIO_DATA, 0xbf000001);
+ t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE);
+ t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 1 << idx);
+ }
+ if (which & MAC_DIRECTION_RX)
+ t3_write_reg(adap, A_XGM_RX_CTRL + oft, F_RXEN);
+ return 0;
+}
+
+int t3_mac_disable(struct cmac *mac, int which)
+{
+ int idx = macidx(mac);
+ struct adapter *adap = mac->adapter;
+
+ if (which & MAC_DIRECTION_TX) {
+ t3_write_reg(adap, A_XGM_TX_CTRL + mac->offset, 0);
+ t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_CFG_CH0 + idx);
+ t3_write_reg(adap, A_TP_PIO_DATA, 0xc000001f);
+ t3_write_reg(adap, A_TP_PIO_ADDR, A_TP_TX_DROP_MODE);
+ t3_set_reg_field(adap, A_TP_PIO_DATA, 1 << idx, 0);
+ }
+ if (which & MAC_DIRECTION_RX)
+ t3_write_reg(adap, A_XGM_RX_CTRL + mac->offset, 0);
+ return 0;
+}
+
+/*
+ * This function is called periodically to accumulate the current values of the
+ * RMON counters into the port statistics. Since the packet counters are only
+ * 32 bits they can overflow in ~286 secs at 10G, so the function should be
+ * called more frequently than that. The byte counters are 45-bit wide, they
+ * would overflow in ~7.8 hours.
+ */
+const struct mac_stats *t3_mac_update_stats(struct cmac *mac)
+{
+#define RMON_READ(mac, addr) t3_read_reg(mac->adapter, addr + mac->offset)
+#define RMON_UPDATE(mac, name, reg) \
+ (mac)->stats.name += (u64)RMON_READ(mac, A_XGM_STAT_##reg)
+#define RMON_UPDATE64(mac, name, reg_lo, reg_hi) \
+ (mac)->stats.name += RMON_READ(mac, A_XGM_STAT_##reg_lo) + \
+ ((u64)RMON_READ(mac, A_XGM_STAT_##reg_hi) << 32)
+
+ u32 v, lo;
+
+ RMON_UPDATE64(mac, rx_octets, RX_BYTES_LOW, RX_BYTES_HIGH);
+ RMON_UPDATE64(mac, rx_frames, RX_FRAMES_LOW, RX_FRAMES_HIGH);
+ RMON_UPDATE(mac, rx_mcast_frames, RX_MCAST_FRAMES);
+ RMON_UPDATE(mac, rx_bcast_frames, RX_BCAST_FRAMES);
+ RMON_UPDATE(mac, rx_fcs_errs, RX_CRC_ERR_FRAMES);
+ RMON_UPDATE(mac, rx_pause, RX_PAUSE_FRAMES);
+ RMON_UPDATE(mac, rx_jabber, RX_JABBER_FRAMES);
+ RMON_UPDATE(mac, rx_short, RX_SHORT_FRAMES);
+ RMON_UPDATE(mac, rx_symbol_errs, RX_SYM_CODE_ERR_FRAMES);
+
+ RMON_UPDATE(mac, rx_too_long, RX_OVERSIZE_FRAMES);
+ mac->stats.rx_too_long += RMON_READ(mac, A_XGM_RX_MAX_PKT_SIZE_ERR_CNT);
+
+ RMON_UPDATE(mac, rx_frames_64, RX_64B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_65_127, RX_65_127B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_128_255, RX_128_255B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_256_511, RX_256_511B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_512_1023, RX_512_1023B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_1024_1518, RX_1024_1518B_FRAMES);
+ RMON_UPDATE(mac, rx_frames_1519_max, RX_1519_MAXB_FRAMES);
+
+ RMON_UPDATE64(mac, tx_octets, TX_BYTE_LOW, TX_BYTE_HIGH);
+ RMON_UPDATE64(mac, tx_frames, TX_FRAME_LOW, TX_FRAME_HIGH);
+ RMON_UPDATE(mac, tx_mcast_frames, TX_MCAST);
+ RMON_UPDATE(mac, tx_bcast_frames, TX_BCAST);
+ RMON_UPDATE(mac, tx_pause, TX_PAUSE);
+ /* This counts error frames in general (bad FCS, underrun, etc). */
+ RMON_UPDATE(mac, tx_underrun, TX_ERR_FRAMES);
+
+ RMON_UPDATE(mac, tx_frames_64, TX_64B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_65_127, TX_65_127B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_128_255, TX_128_255B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_256_511, TX_256_511B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_512_1023, TX_512_1023B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_1024_1518, TX_1024_1518B_FRAMES);
+ RMON_UPDATE(mac, tx_frames_1519_max, TX_1519_MAXB_FRAMES);
+
+ /* The next stat isn't clear-on-read. */
+ t3_write_reg(mac->adapter, A_TP_MIB_INDEX, mac->offset ? 51 : 50);
+ v = t3_read_reg(mac->adapter, A_TP_MIB_RDATA);
+ lo = (u32) mac->stats.rx_cong_drops;
+ mac->stats.rx_cong_drops += (u64) (v - lo);
+
+ return &mac->stats;
+}
*
* adopted from sunlance.c by Richard van den Berg
*
- * Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
+ * Copyright (C) 2002, 2003, 2005, 2006 Maciej W. Rozycki
*
* additional sources:
* - PMAD-AA TURBOchannel Ethernet Module Functional Specification,
* v0.010: Fixes for the PMAD mapping of the LANCE buffer and for the
* PMAX requirement to only use halfword accesses to the
* buffer. macro
+ *
+ * v0.011: Converted the PMAD to the driver model. macro
*/
#include <linux/crc32.h>
#include <linux/spinlock.h>
#include <linux/stddef.h>
#include <linux/string.h>
+#include <linux/tc.h>
#include <linux/types.h>
#include <asm/addrspace.h>
#include <asm/dec/kn01.h>
#include <asm/dec/machtype.h>
#include <asm/dec/system.h>
-#include <asm/dec/tc.h>
static char version[] __devinitdata =
-"declance.c: v0.010 by Linux MIPS DECstation task force\n";
+"declance.c: v0.011 by Linux MIPS DECstation task force\n";
MODULE_AUTHOR("Linux MIPS DECstation task force");
MODULE_DESCRIPTION("DEC LANCE (DECstation onboard, PMAD-xx) driver");
MODULE_LICENSE("GPL");
+#define __unused __attribute__ ((unused))
+
/*
* card types
*/
struct lance_private {
struct net_device *next;
int type;
- int slot;
int dma_irq;
volatile struct lance_regs *ll;
int dec_lance_debug = 2;
+static struct tc_driver dec_lance_tc_driver;
static struct net_device *root_lance_dev;
static inline void writereg(volatile unsigned short *regptr, short value)
lance_set_multicast(dev);
}
-static int __init dec_lance_init(const int type, const int slot)
+static int __init dec_lance_probe(struct device *bdev, const int type)
{
static unsigned version_printed;
static const char fmt[] = "declance%d";
struct net_device *dev;
struct lance_private *lp;
volatile struct lance_regs *ll;
+ resource_size_t start = 0, len = 0;
int i, ret;
unsigned long esar_base;
unsigned char *esar;
if (dec_lance_debug && version_printed++ == 0)
printk(version);
- i = 0;
- dev = root_lance_dev;
- while (dev) {
- i++;
- lp = (struct lance_private *)dev->priv;
- dev = lp->next;
+ if (bdev)
+ snprintf(name, sizeof(name), "%s", bdev->bus_id);
+ else {
+ i = 0;
+ dev = root_lance_dev;
+ while (dev) {
+ i++;
+ lp = (struct lance_private *)dev->priv;
+ dev = lp->next;
+ }
+ snprintf(name, sizeof(name), fmt, i);
}
- snprintf(name, sizeof(name), fmt, i);
dev = alloc_etherdev(sizeof(struct lance_private));
if (!dev) {
spin_lock_init(&lp->lock);
lp->type = type;
- lp->slot = slot;
switch (type) {
case ASIC_LANCE:
dev->base_addr = CKSEG1ADDR(dec_kn_slot_base + IOASIC_LANCE);
break;
#ifdef CONFIG_TC
case PMAD_LANCE:
- claim_tc_card(slot);
+ dev_set_drvdata(bdev, dev);
+
+ start = to_tc_dev(bdev)->resource.start;
+ len = to_tc_dev(bdev)->resource.end - start + 1;
+ if (!request_mem_region(start, len, bdev->bus_id)) {
+ printk(KERN_ERR
+ "%s: Unable to reserve MMIO resource\n",
+ bdev->bus_id);
+ ret = -EBUSY;
+ goto err_out_dev;
+ }
- dev->mem_start = CKSEG1ADDR(get_tc_base_addr(slot));
+ dev->mem_start = CKSEG1ADDR(start);
dev->mem_end = dev->mem_start + 0x100000;
dev->base_addr = dev->mem_start + 0x100000;
- dev->irq = get_tc_irq_nr(slot);
+ dev->irq = to_tc_dev(bdev)->interrupt;
esar_base = dev->mem_start + 0x1c0002;
lp->dma_irq = -1;
printk(KERN_ERR "%s: declance_init called with unknown type\n",
name);
ret = -ENODEV;
- goto err_out_free_dev;
+ goto err_out_dev;
}
ll = (struct lance_regs *) dev->base_addr;
"%s: Ethernet station address prom not found!\n",
name);
ret = -ENODEV;
- goto err_out_free_dev;
+ goto err_out_resource;
}
/* Check the prom contents */
for (i = 0; i < 8; i++) {
printk(KERN_ERR "%s: Something is wrong with the "
"ethernet station address prom!\n", name);
ret = -ENODEV;
- goto err_out_free_dev;
+ goto err_out_resource;
}
}
if (ret) {
printk(KERN_ERR
"%s: Unable to register netdev, aborting.\n", name);
- goto err_out_free_dev;
+ goto err_out_resource;
}
- lp->next = root_lance_dev;
- root_lance_dev = dev;
+ if (!bdev) {
+ lp->next = root_lance_dev;
+ root_lance_dev = dev;
+ }
printk("%s: registered as %s.\n", name, dev->name);
return 0;
-err_out_free_dev:
+err_out_resource:
+ if (bdev)
+ release_mem_region(start, len);
+
+err_out_dev:
free_netdev(dev);
err_out:
return ret;
}
+static void __exit dec_lance_remove(struct device *bdev)
+{
+ struct net_device *dev = dev_get_drvdata(bdev);
+ resource_size_t start, len;
+
+ unregister_netdev(dev);
+ start = to_tc_dev(bdev)->resource.start;
+ len = to_tc_dev(bdev)->resource.end - start + 1;
+ release_mem_region(start, len);
+ free_netdev(dev);
+}
/* Find all the lance cards on the system and initialize them */
-static int __init dec_lance_probe(void)
+static int __init dec_lance_platform_probe(void)
{
int count = 0;
- /* Scan slots for PMAD-AA cards first. */
-#ifdef CONFIG_TC
- if (TURBOCHANNEL) {
- int slot;
-
- while ((slot = search_tc_card("PMAD-AA")) >= 0) {
- if (dec_lance_init(PMAD_LANCE, slot) < 0)
- break;
- count++;
- }
- }
-#endif
-
- /* Then handle onboard devices. */
if (dec_interrupt[DEC_IRQ_LANCE] >= 0) {
if (dec_interrupt[DEC_IRQ_LANCE_MERR] >= 0) {
- if (dec_lance_init(ASIC_LANCE, -1) >= 0)
+ if (dec_lance_probe(NULL, ASIC_LANCE) >= 0)
count++;
} else if (!TURBOCHANNEL) {
- if (dec_lance_init(PMAX_LANCE, -1) >= 0)
+ if (dec_lance_probe(NULL, PMAX_LANCE) >= 0)
count++;
}
}
return (count > 0) ? 0 : -ENODEV;
}
-static void __exit dec_lance_cleanup(void)
+static void __exit dec_lance_platform_remove(void)
{
while (root_lance_dev) {
struct net_device *dev = root_lance_dev;
struct lance_private *lp = netdev_priv(dev);
unregister_netdev(dev);
-#ifdef CONFIG_TC
- if (lp->slot >= 0)
- release_tc_card(lp->slot);
-#endif
root_lance_dev = lp->next;
free_netdev(dev);
}
}
-module_init(dec_lance_probe);
-module_exit(dec_lance_cleanup);
+#ifdef CONFIG_TC
+static int __init dec_lance_tc_probe(struct device *dev);
+static int __exit dec_lance_tc_remove(struct device *dev);
+
+static const struct tc_device_id dec_lance_tc_table[] = {
+ { "DEC ", "PMAD-AA " },
+ { }
+};
+MODULE_DEVICE_TABLE(tc, dec_lance_tc_table);
+
+static struct tc_driver dec_lance_tc_driver = {
+ .id_table = dec_lance_tc_table,
+ .driver = {
+ .name = "declance",
+ .bus = &tc_bus_type,
+ .probe = dec_lance_tc_probe,
+ .remove = __exit_p(dec_lance_tc_remove),
+ },
+};
+
+static int __init dec_lance_tc_probe(struct device *dev)
+{
+ int status = dec_lance_probe(dev, PMAD_LANCE);
+ if (!status)
+ get_device(dev);
+ return status;
+}
+
+static int __exit dec_lance_tc_remove(struct device *dev)
+{
+ put_device(dev);
+ dec_lance_remove(dev);
+ return 0;
+}
+#endif
+
+static int __init dec_lance_init(void)
+{
+ int status;
+
+ status = tc_register_driver(&dec_lance_tc_driver);
+ if (!status)
+ dec_lance_platform_probe();
+ return status;
+}
+
+static void __exit dec_lance_exit(void)
+{
+ dec_lance_platform_remove();
+ tc_unregister_driver(&dec_lance_tc_driver);
+}
+
+
+module_init(dec_lance_init);
+module_exit(dec_lance_exit);
#include <linux/capability.h>
#include <linux/in.h>
#include <linux/ip.h>
-#ifdef NETIF_F_TSO6
#include <linux/ipv6.h>
-#endif
#include <linux/tcp.h>
#include <linux/udp.h>
#include <net/pkt_sched.h>
#include <linux/list.h>
#include <linux/reboot.h>
-#ifdef NETIF_F_TSO
#include <net/checksum.h>
-#endif
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
spinlock_t tx_queue_lock;
#endif
atomic_t irq_sem;
- unsigned int detect_link;
unsigned int total_tx_bytes;
unsigned int total_tx_packets;
unsigned int total_rx_bytes;
boolean_t have_msi;
#endif
/* to not mess up cache alignment, always add to the bottom */
-#ifdef NETIF_F_TSO
boolean_t tso_force;
-#endif
boolean_t smart_power_down; /* phy smart power down */
boolean_t quad_port_a;
unsigned long flags;
return 0;
}
-#ifdef NETIF_F_TSO
static int
e1000_set_tso(struct net_device *netdev, uint32_t data)
{
else
netdev->features &= ~NETIF_F_TSO;
-#ifdef NETIF_F_TSO6
if (data)
netdev->features |= NETIF_F_TSO6;
else
netdev->features &= ~NETIF_F_TSO6;
-#endif
DPRINTK(PROBE, INFO, "TSO is %s\n", data ? "Enabled" : "Disabled");
adapter->tso_force = TRUE;
return 0;
}
-#endif /* NETIF_F_TSO */
static uint32_t
e1000_get_msglevel(struct net_device *netdev)
.set_tx_csum = e1000_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
.get_tso = ethtool_op_get_tso,
.set_tso = e1000_set_tso,
-#endif
.self_test_count = e1000_diag_test_count,
.self_test = e1000_diag_test,
.get_strings = e1000_get_strings,
#else
#define DRIVERNAPI "-NAPI"
#endif
-#define DRV_VERSION "7.3.15-k2"DRIVERNAPI
+#define DRV_VERSION "7.3.20-k2"DRIVERNAPI
char e1000_driver_version[] = DRV_VERSION;
static char e1000_copyright[] = "Copyright (c) 1999-2006 Intel Corporation.";
netdev->features &= ~NETIF_F_HW_VLAN_FILTER;
}
-#ifdef NETIF_F_TSO
if ((adapter->hw.mac_type >= e1000_82544) &&
(adapter->hw.mac_type != e1000_82547))
netdev->features |= NETIF_F_TSO;
-#ifdef NETIF_F_TSO6
if (adapter->hw.mac_type > e1000_82547_rev_2)
netdev->features |= NETIF_F_TSO6;
-#endif
-#endif
if (pci_using_dac)
netdev->features |= NETIF_F_HIGHDMA;
if (link) {
if (!netif_carrier_ok(netdev)) {
+ uint32_t ctrl;
boolean_t txb2b = 1;
e1000_get_speed_and_duplex(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
- DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s\n",
- adapter->link_speed,
- adapter->link_duplex == FULL_DUPLEX ?
- "Full Duplex" : "Half Duplex");
+ ctrl = E1000_READ_REG(&adapter->hw, CTRL);
+ DPRINTK(LINK, INFO, "NIC Link is Up %d Mbps %s, "
+ "Flow Control: %s\n",
+ adapter->link_speed,
+ adapter->link_duplex == FULL_DUPLEX ?
+ "Full Duplex" : "Half Duplex",
+ ((ctrl & E1000_CTRL_TFCE) && (ctrl &
+ E1000_CTRL_RFCE)) ? "RX/TX" : ((ctrl &
+ E1000_CTRL_RFCE) ? "RX" : ((ctrl &
+ E1000_CTRL_TFCE) ? "TX" : "None" )));
/* tweak tx_queue_len according to speed/duplex
* and adjust the timeout factor */
E1000_WRITE_REG(&adapter->hw, TARC0, tarc0);
}
-#ifdef NETIF_F_TSO
/* disable TSO for pcie and 10/100 speeds, to avoid
* some hardware issues */
if (!adapter->tso_force &&
DPRINTK(PROBE,INFO,
"10/100 speed: disabling TSO\n");
netdev->features &= ~NETIF_F_TSO;
-#ifdef NETIF_F_TSO6
netdev->features &= ~NETIF_F_TSO6;
-#endif
break;
case SPEED_1000:
netdev->features |= NETIF_F_TSO;
-#ifdef NETIF_F_TSO6
netdev->features |= NETIF_F_TSO6;
-#endif
break;
default:
/* oops */
break;
}
}
-#endif
/* enable transmits in the hardware, need to do this
* after setting TARC0 */
e1000_tso(struct e1000_adapter *adapter, struct e1000_tx_ring *tx_ring,
struct sk_buff *skb)
{
-#ifdef NETIF_F_TSO
struct e1000_context_desc *context_desc;
struct e1000_buffer *buffer_info;
unsigned int i;
0);
cmd_length = E1000_TXD_CMD_IP;
ipcse = skb->h.raw - skb->data - 1;
-#ifdef NETIF_F_TSO6
} else if (skb->protocol == htons(ETH_P_IPV6)) {
skb->nh.ipv6h->payload_len = 0;
skb->h.th->check =
IPPROTO_TCP,
0);
ipcse = 0;
-#endif
}
ipcss = skb->nh.raw - skb->data;
ipcso = (void *)&(skb->nh.iph->check) - (void *)skb->data;
return TRUE;
}
-#endif
-
return FALSE;
}
buffer_info = &tx_ring->buffer_info[i];
context_desc = E1000_CONTEXT_DESC(*tx_ring, i);
+ context_desc->lower_setup.ip_config = 0;
context_desc->upper_setup.tcp_fields.tucss = css;
- context_desc->upper_setup.tcp_fields.tucso = css + skb->csum_offset;
+ context_desc->upper_setup.tcp_fields.tucso = css + skb->csum;
context_desc->upper_setup.tcp_fields.tucse = 0;
context_desc->tcp_seg_setup.data = 0;
context_desc->cmd_and_length = cpu_to_le32(E1000_TXD_CMD_DEXT);
while (len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
-#ifdef NETIF_F_TSO
/* Workaround for Controller erratum --
* descriptor for non-tso packet in a linear SKB that follows a
* tso gets written back prematurely before the data is fully
* in TSO mode. Append 4-byte sentinel desc */
if (unlikely(mss && !nr_frags && size == len && size > 8))
size -= 4;
-#endif
/* work-around for errata 10 and it applies
* to all controllers in PCI-X mode
* The fix is to make sure that the first descriptor of a
while (len) {
buffer_info = &tx_ring->buffer_info[i];
size = min(len, max_per_txd);
-#ifdef NETIF_F_TSO
/* Workaround for premature desc write-backs
* in TSO mode. Append 4-byte sentinel desc */
if (unlikely(mss && f == (nr_frags-1) && size == len && size > 8))
size -= 4;
-#endif
/* Workaround for potential 82544 hang in PCI-X.
* Avoid terminating buffers within evenly-aligned
* dwords. */
if (adapter->hw.mac_type >= e1000_82571)
max_per_txd = 8192;
-#ifdef NETIF_F_TSO
mss = skb_shinfo(skb)->gso_size;
/* The controller does a simple calculation to
* make sure there is enough room in the FIFO before
if ((mss) || (skb->ip_summed == CHECKSUM_PARTIAL))
count++;
count++;
-#else
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- count++;
-#endif
-#ifdef NETIF_F_TSO
/* Controller Erratum workaround */
if (!skb->data_len && tx_ring->last_tx_tso && !skb_is_gso(skb))
count++;
-#endif
count += TXD_USE_COUNT(len, max_txd_pwr);
*/
if (adapter->link_speed == 0)
return;
- if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
+ if (pci_channel_offline(pdev))
return;
spin_lock_irqsave(&adapter->stats_lock, flags);
* @data: pointer to a network interface device structure
**/
-static
-irqreturn_t e1000_intr_msi(int irq, void *data)
+static irqreturn_t
+e1000_intr_msi(int irq, void *data)
{
struct net_device *netdev = data;
struct e1000_adapter *adapter = netdev_priv(netdev);
#ifndef CONFIG_E1000_NAPI
int i;
#endif
+ uint32_t icr = E1000_READ_REG(hw, ICR);
- /* this code avoids the read of ICR but has to get 1000 interrupts
- * at every link change event before it will notice the change */
- if (++adapter->detect_link >= 1000) {
- uint32_t icr = E1000_READ_REG(hw, ICR);
#ifdef CONFIG_E1000_NAPI
- /* read ICR disables interrupts using IAM, so keep up with our
- * enable/disable accounting */
- atomic_inc(&adapter->irq_sem);
+ /* read ICR disables interrupts using IAM, so keep up with our
+ * enable/disable accounting */
+ atomic_inc(&adapter->irq_sem);
#endif
- adapter->detect_link = 0;
- if ((icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) &&
- (icr & E1000_ICR_INT_ASSERTED)) {
- hw->get_link_status = 1;
- /* 80003ES2LAN workaround--
- * For packet buffer work-around on link down event;
- * disable receives here in the ISR and
- * reset adapter in watchdog
- */
- if (netif_carrier_ok(netdev) &&
- (adapter->hw.mac_type == e1000_80003es2lan)) {
- /* disable receives */
- uint32_t rctl = E1000_READ_REG(hw, RCTL);
- E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
- }
- /* guard against interrupt when we're going down */
- if (!test_bit(__E1000_DOWN, &adapter->flags))
- mod_timer(&adapter->watchdog_timer,
- jiffies + 1);
+ if (icr & (E1000_ICR_RXSEQ | E1000_ICR_LSC)) {
+ hw->get_link_status = 1;
+ /* 80003ES2LAN workaround-- For packet buffer work-around on
+ * link down event; disable receives here in the ISR and reset
+ * adapter in watchdog */
+ if (netif_carrier_ok(netdev) &&
+ (adapter->hw.mac_type == e1000_80003es2lan)) {
+ /* disable receives */
+ uint32_t rctl = E1000_READ_REG(hw, RCTL);
+ E1000_WRITE_REG(hw, RCTL, rctl & ~E1000_RCTL_EN);
}
- } else {
- E1000_WRITE_REG(hw, ICR, (0xffffffff & ~(E1000_ICR_RXSEQ |
- E1000_ICR_LSC)));
- /* bummer we have to flush here, but things break otherwise as
- * some event appears to be lost or delayed and throughput
- * drops. In almost all tests this flush is un-necessary */
- E1000_WRITE_FLUSH(hw);
-#ifdef CONFIG_E1000_NAPI
- /* Interrupt Auto-Mask (IAM)...upon writing ICR, interrupts are
- * masked. No need for the IMC write, but it does mean we
- * should account for it ASAP. */
- atomic_inc(&adapter->irq_sem);
-#endif
+ /* guard against interrupt when we're going down */
+ if (!test_bit(__E1000_DOWN, &adapter->flags))
+ mod_timer(&adapter->watchdog_timer, jiffies + 1);
}
#ifdef CONFIG_E1000_NAPI
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
- !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
for (i = 0; i < E1000_MAX_INTR; i++)
if (unlikely(!adapter->clean_rx(adapter, adapter->rx_ring) &
- !e1000_clean_tx_irq(adapter, adapter->tx_ring)))
+ e1000_clean_tx_irq(adapter, adapter->tx_ring)))
break;
if (likely(adapter->itr_setting & 3))
poll_dev->quota -= work_done;
/* If no Tx and not enough Rx work done, exit the polling mode */
- if ((!tx_cleaned && (work_done == 0)) ||
+ if ((tx_cleaned && (work_done < work_to_do)) ||
!netif_running(poll_dev)) {
quit_polling:
if (likely(adapter->itr_setting & 3))
#ifdef CONFIG_E1000_NAPI
unsigned int count = 0;
#endif
- boolean_t cleaned = FALSE;
+ boolean_t cleaned = TRUE;
unsigned int total_tx_bytes=0, total_tx_packets=0;
i = tx_ring->next_to_clean;
if (cleaned) {
struct sk_buff *skb = buffer_info->skb;
- unsigned int segs = skb_shinfo(skb)->gso_segs;
+ unsigned int segs, bytecount;
+ segs = skb_shinfo(skb)->gso_segs ?: 1;
+ /* multiply data chunks by size of headers */
+ bytecount = ((segs - 1) * skb_headlen(skb)) +
+ skb->len;
total_tx_packets += segs;
- total_tx_packets++;
- total_tx_bytes += skb->len;
+ total_tx_bytes += bytecount;
}
e1000_unmap_and_free_tx_resource(adapter, buffer_info);
tx_desc->upper.data = 0;
#ifdef CONFIG_E1000_NAPI
#define E1000_TX_WEIGHT 64
/* weight of a sort for tx, to avoid endless transmit cleanup */
- if (count++ == E1000_TX_WEIGHT) break;
+ if (count++ == E1000_TX_WEIGHT) {
+ cleaned = FALSE;
+ break;
+ }
#endif
}
TRUE = 1
} boolean_t;
-#define MSGOUT(S, A, B) printk(KERN_DEBUG S "\n", A, B)
-
#ifdef DBG
#define DEBUGOUT(S) printk(KERN_DEBUG S "\n")
#define DEBUGOUT1(S, A...) printk(KERN_DEBUG S "\n", A)
#define DEBUGOUT1(S, A...)
#endif
-#define DEBUGFUNC(F) DEBUGOUT(F)
+#define DEBUGFUNC(F) DEBUGOUT(F "\n")
#define DEBUGOUT2 DEBUGOUT1
#define DEBUGOUT3 DEBUGOUT2
#define DEBUGOUT7 DEBUGOUT3
case SPEED_1000:
DPRINTK(PROBE, INFO, "1000 Mbps Speed specified without "
"Duplex\n");
- DPRINTK(PROBE, INFO,
- "Using Autonegotiation at 1000 Mbps "
- "Full Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
- break;
+ goto full_duplex_only;
case SPEED_1000 + HALF_DUPLEX:
DPRINTK(PROBE, INFO,
"Half Duplex is not supported at 1000 Mbps\n");
- DPRINTK(PROBE, INFO,
- "Using Autonegotiation at 1000 Mbps "
- "Full Duplex only\n");
- adapter->hw.autoneg = adapter->fc_autoneg = 1;
- adapter->hw.autoneg_advertised = ADVERTISE_1000_FULL;
- break;
+ /* fall through */
case SPEED_1000 + FULL_DUPLEX:
+full_duplex_only:
DPRINTK(PROBE, INFO,
"Using Autonegotiation at 1000 Mbps Full Duplex only\n");
adapter->hw.autoneg = adapter->fc_autoneg = 1;
* 0.57: 14 May 2006: Mac address set in probe/remove and order corrections.
* 0.58: 30 Oct 2006: Added support for sideband management unit.
* 0.59: 30 Oct 2006: Added support for recoverable error.
+ * 0.60: 20 Jan 2007: Code optimizations for rings, rx & tx data paths, and stats.
*
* Known bugs:
* We suspect that on some hardware no TX done interrupts are generated.
#else
#define DRIVERNAPI
#endif
-#define FORCEDETH_VERSION "0.59"
+#define FORCEDETH_VERSION "0.60"
#define DRV_NAME "forcedeth"
#include <linux/module.h>
#define DEV_HAS_MSI_X 0x0080 /* device supports MSI-X */
#define DEV_HAS_POWER_CNTRL 0x0100 /* device supports power savings */
#define DEV_HAS_PAUSEFRAME_TX 0x0200 /* device supports tx pause frames */
-#define DEV_HAS_STATISTICS 0x0400 /* device supports hw statistics */
-#define DEV_HAS_TEST_EXTENDED 0x0800 /* device supports extended diagnostic test */
-#define DEV_HAS_MGMT_UNIT 0x1000 /* device supports management unit */
+#define DEV_HAS_STATISTICS_V1 0x0400 /* device supports hw statistics version 1 */
+#define DEV_HAS_STATISTICS_V2 0x0800 /* device supports hw statistics version 2 */
+#define DEV_HAS_TEST_EXTENDED 0x1000 /* device supports extended diagnostic test */
+#define DEV_HAS_MGMT_UNIT 0x2000 /* device supports management unit */
enum {
NvRegIrqStatus = 0x000,
* NVREG_POLL_DEFAULT=97 would result in an interval length of 1 ms
*/
NvRegPollingInterval = 0x00c,
-#define NVREG_POLL_DEFAULT_THROUGHPUT 970
+#define NVREG_POLL_DEFAULT_THROUGHPUT 970 /* backup tx cleanup if loop max reached */
#define NVREG_POLL_DEFAULT_CPU 13
NvRegMSIMap0 = 0x020,
NvRegMSIMap1 = 0x024,
#define NVREG_TXRXCTL_RESET 0x0010
#define NVREG_TXRXCTL_RXCHECK 0x0400
#define NVREG_TXRXCTL_DESC_1 0
-#define NVREG_TXRXCTL_DESC_2 0x02100
-#define NVREG_TXRXCTL_DESC_3 0x02200
+#define NVREG_TXRXCTL_DESC_2 0x002100
+#define NVREG_TXRXCTL_DESC_3 0xc02200
#define NVREG_TXRXCTL_VLANSTRIP 0x00040
#define NVREG_TXRXCTL_VLANINS 0x00080
NvRegTxRingPhysAddrHigh = 0x148,
/* Miscelaneous hardware related defines: */
#define NV_PCI_REGSZ_VER1 0x270
-#define NV_PCI_REGSZ_VER2 0x604
+#define NV_PCI_REGSZ_VER2 0x2d4
+#define NV_PCI_REGSZ_VER3 0x604
/* various timeout delays: all in usec */
#define NV_TXRX_RESET_DELAY 4
#define TX_RING_MIN 64
#define RING_MAX_DESC_VER_1 1024
#define RING_MAX_DESC_VER_2_3 16384
-/*
- * Difference between the get and put pointers for the tx ring.
- * This is used to throttle the amount of data outstanding in the
- * tx ring.
- */
-#define TX_LIMIT_DIFFERENCE 1
/* rx/tx mac addr + type + vlan + align + slack*/
#define NV_RX_HEADERS (64)
{ "tx_carrier_errors" },
{ "tx_excess_deferral" },
{ "tx_retry_error" },
- { "tx_deferral" },
- { "tx_packets" },
- { "tx_pause" },
{ "rx_frame_error" },
{ "rx_extra_byte" },
{ "rx_late_collision" },
{ "rx_unicast" },
{ "rx_multicast" },
{ "rx_broadcast" },
+ { "rx_packets" },
+ { "rx_errors_total" },
+ { "tx_errors_total" },
+
+ /* version 2 stats */
+ { "tx_deferral" },
+ { "tx_packets" },
{ "rx_bytes" },
+ { "tx_pause" },
{ "rx_pause" },
- { "rx_drop_frame" },
- { "rx_packets" },
- { "rx_errors_total" }
+ { "rx_drop_frame" }
};
struct nv_ethtool_stats {
u64 tx_carrier_errors;
u64 tx_excess_deferral;
u64 tx_retry_error;
- u64 tx_deferral;
- u64 tx_packets;
- u64 tx_pause;
u64 rx_frame_error;
u64 rx_extra_byte;
u64 rx_late_collision;
u64 rx_unicast;
u64 rx_multicast;
u64 rx_broadcast;
+ u64 rx_packets;
+ u64 rx_errors_total;
+ u64 tx_errors_total;
+
+ /* version 2 stats */
+ u64 tx_deferral;
+ u64 tx_packets;
u64 rx_bytes;
+ u64 tx_pause;
u64 rx_pause;
u64 rx_drop_frame;
- u64 rx_packets;
- u64 rx_errors_total;
};
+#define NV_DEV_STATISTICS_V2_COUNT (sizeof(struct nv_ethtool_stats)/sizeof(u64))
+#define NV_DEV_STATISTICS_V1_COUNT (NV_DEV_STATISTICS_V2_COUNT - 6)
+
/* diagnostics */
#define NV_TEST_COUNT_BASE 3
#define NV_TEST_COUNT_EXTENDED 4
{ 0,0 }
};
+struct nv_skb_map {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+ unsigned int dma_len;
+};
+
/*
* SMP locking:
* All hardware access under dev->priv->lock, except the performance
/* rx specific fields.
* Locking: Within irq hander or disable_irq+spin_lock(&np->lock);
*/
+ union ring_type get_rx, put_rx, first_rx, last_rx;
+ struct nv_skb_map *get_rx_ctx, *put_rx_ctx;
+ struct nv_skb_map *first_rx_ctx, *last_rx_ctx;
+ struct nv_skb_map *rx_skb;
+
union ring_type rx_ring;
- unsigned int cur_rx, refill_rx;
- struct sk_buff **rx_skbuff;
- dma_addr_t *rx_dma;
unsigned int rx_buf_sz;
unsigned int pkt_limit;
struct timer_list oom_kick;
/*
* tx specific fields.
*/
+ union ring_type get_tx, put_tx, first_tx, last_tx;
+ struct nv_skb_map *get_tx_ctx, *put_tx_ctx;
+ struct nv_skb_map *first_tx_ctx, *last_tx_ctx;
+ struct nv_skb_map *tx_skb;
+
union ring_type tx_ring;
- unsigned int next_tx, nic_tx;
- struct sk_buff **tx_skbuff;
- dma_addr_t *tx_dma;
- unsigned int *tx_dma_len;
u32 tx_flags;
int tx_ring_size;
- int tx_limit_start;
- int tx_limit_stop;
+ int tx_stop;
/* vlan fields */
struct vlan_group *vlangrp;
pci_free_consistent(np->pci_dev, sizeof(struct ring_desc_ex) * (np->rx_ring_size + np->tx_ring_size),
np->rx_ring.ex, np->ring_addr);
}
- if (np->rx_skbuff)
- kfree(np->rx_skbuff);
- if (np->rx_dma)
- kfree(np->rx_dma);
- if (np->tx_skbuff)
- kfree(np->tx_skbuff);
- if (np->tx_dma)
- kfree(np->tx_dma);
- if (np->tx_dma_len)
- kfree(np->tx_dma_len);
+ if (np->rx_skb)
+ kfree(np->rx_skb);
+ if (np->tx_skb)
+ kfree(np->tx_skb);
}
static int using_multi_irqs(struct net_device *dev)
pci_push(base);
}
+static void nv_get_hw_stats(struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+
+ np->estats.tx_bytes += readl(base + NvRegTxCnt);
+ np->estats.tx_zero_rexmt += readl(base + NvRegTxZeroReXmt);
+ np->estats.tx_one_rexmt += readl(base + NvRegTxOneReXmt);
+ np->estats.tx_many_rexmt += readl(base + NvRegTxManyReXmt);
+ np->estats.tx_late_collision += readl(base + NvRegTxLateCol);
+ np->estats.tx_fifo_errors += readl(base + NvRegTxUnderflow);
+ np->estats.tx_carrier_errors += readl(base + NvRegTxLossCarrier);
+ np->estats.tx_excess_deferral += readl(base + NvRegTxExcessDef);
+ np->estats.tx_retry_error += readl(base + NvRegTxRetryErr);
+ np->estats.rx_frame_error += readl(base + NvRegRxFrameErr);
+ np->estats.rx_extra_byte += readl(base + NvRegRxExtraByte);
+ np->estats.rx_late_collision += readl(base + NvRegRxLateCol);
+ np->estats.rx_runt += readl(base + NvRegRxRunt);
+ np->estats.rx_frame_too_long += readl(base + NvRegRxFrameTooLong);
+ np->estats.rx_over_errors += readl(base + NvRegRxOverflow);
+ np->estats.rx_crc_errors += readl(base + NvRegRxFCSErr);
+ np->estats.rx_frame_align_error += readl(base + NvRegRxFrameAlignErr);
+ np->estats.rx_length_error += readl(base + NvRegRxLenErr);
+ np->estats.rx_unicast += readl(base + NvRegRxUnicast);
+ np->estats.rx_multicast += readl(base + NvRegRxMulticast);
+ np->estats.rx_broadcast += readl(base + NvRegRxBroadcast);
+ np->estats.rx_packets =
+ np->estats.rx_unicast +
+ np->estats.rx_multicast +
+ np->estats.rx_broadcast;
+ np->estats.rx_errors_total =
+ np->estats.rx_crc_errors +
+ np->estats.rx_over_errors +
+ np->estats.rx_frame_error +
+ (np->estats.rx_frame_align_error - np->estats.rx_extra_byte) +
+ np->estats.rx_late_collision +
+ np->estats.rx_runt +
+ np->estats.rx_frame_too_long;
+ np->estats.tx_errors_total =
+ np->estats.tx_late_collision +
+ np->estats.tx_fifo_errors +
+ np->estats.tx_carrier_errors +
+ np->estats.tx_excess_deferral +
+ np->estats.tx_retry_error;
+
+ if (np->driver_data & DEV_HAS_STATISTICS_V2) {
+ np->estats.tx_deferral += readl(base + NvRegTxDef);
+ np->estats.tx_packets += readl(base + NvRegTxFrame);
+ np->estats.rx_bytes += readl(base + NvRegRxCnt);
+ np->estats.tx_pause += readl(base + NvRegTxPause);
+ np->estats.rx_pause += readl(base + NvRegRxPause);
+ np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
+ }
+}
+
/*
* nv_get_stats: dev->get_stats function
* Get latest stats value from the nic.
{
struct fe_priv *np = netdev_priv(dev);
- /* It seems that the nic always generates interrupts and doesn't
- * accumulate errors internally. Thus the current values in np->stats
- * are already up to date.
- */
+ /* If the nic supports hw counters then retrieve latest values */
+ if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2)) {
+ nv_get_hw_stats(dev);
+
+ /* copy to net_device stats */
+ np->stats.tx_bytes = np->estats.tx_bytes;
+ np->stats.tx_fifo_errors = np->estats.tx_fifo_errors;
+ np->stats.tx_carrier_errors = np->estats.tx_carrier_errors;
+ np->stats.rx_crc_errors = np->estats.rx_crc_errors;
+ np->stats.rx_over_errors = np->estats.rx_over_errors;
+ np->stats.rx_errors = np->estats.rx_errors_total;
+ np->stats.tx_errors = np->estats.tx_errors_total;
+ }
return &np->stats;
}
static int nv_alloc_rx(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
- unsigned int refill_rx = np->refill_rx;
- int nr;
-
- while (np->cur_rx != refill_rx) {
- struct sk_buff *skb;
-
- nr = refill_rx % np->rx_ring_size;
- if (np->rx_skbuff[nr] == NULL) {
+ struct ring_desc* less_rx;
- skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD);
- if (!skb)
- break;
+ less_rx = np->get_rx.orig;
+ if (less_rx-- == np->first_rx.orig)
+ less_rx = np->last_rx.orig;
+ while (np->put_rx.orig != less_rx) {
+ struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD);
+ if (skb) {
skb->dev = dev;
- np->rx_skbuff[nr] = skb;
+ np->put_rx_ctx->skb = skb;
+ np->put_rx_ctx->dma = pci_map_single(np->pci_dev, skb->data,
+ skb->end-skb->data, PCI_DMA_FROMDEVICE);
+ np->put_rx_ctx->dma_len = skb->end-skb->data;
+ np->put_rx.orig->buf = cpu_to_le32(np->put_rx_ctx->dma);
+ wmb();
+ np->put_rx.orig->flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
+ if (unlikely(np->put_rx.orig++ == np->last_rx.orig))
+ np->put_rx.orig = np->first_rx.orig;
+ if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx))
+ np->put_rx_ctx = np->first_rx_ctx;
} else {
- skb = np->rx_skbuff[nr];
+ return 1;
}
- np->rx_dma[nr] = pci_map_single(np->pci_dev, skb->data,
- skb->end-skb->data, PCI_DMA_FROMDEVICE);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- np->rx_ring.orig[nr].buf = cpu_to_le32(np->rx_dma[nr]);
+ }
+ return 0;
+}
+
+static int nv_alloc_rx_optimized(struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ struct ring_desc_ex* less_rx;
+
+ less_rx = np->get_rx.ex;
+ if (less_rx-- == np->first_rx.ex)
+ less_rx = np->last_rx.ex;
+
+ while (np->put_rx.ex != less_rx) {
+ struct sk_buff *skb = dev_alloc_skb(np->rx_buf_sz + NV_RX_ALLOC_PAD);
+ if (skb) {
+ skb->dev = dev;
+ np->put_rx_ctx->skb = skb;
+ np->put_rx_ctx->dma = pci_map_single(np->pci_dev, skb->data,
+ skb->end-skb->data, PCI_DMA_FROMDEVICE);
+ np->put_rx_ctx->dma_len = skb->end-skb->data;
+ np->put_rx.ex->bufhigh = cpu_to_le64(np->put_rx_ctx->dma) >> 32;
+ np->put_rx.ex->buflow = cpu_to_le64(np->put_rx_ctx->dma) & 0x0FFFFFFFF;
wmb();
- np->rx_ring.orig[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX_AVAIL);
+ np->put_rx.ex->flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
+ if (unlikely(np->put_rx.ex++ == np->last_rx.ex))
+ np->put_rx.ex = np->first_rx.ex;
+ if (unlikely(np->put_rx_ctx++ == np->last_rx_ctx))
+ np->put_rx_ctx = np->first_rx_ctx;
} else {
- np->rx_ring.ex[nr].bufhigh = cpu_to_le64(np->rx_dma[nr]) >> 32;
- np->rx_ring.ex[nr].buflow = cpu_to_le64(np->rx_dma[nr]) & 0x0FFFFFFFF;
- wmb();
- np->rx_ring.ex[nr].flaglen = cpu_to_le32(np->rx_buf_sz | NV_RX2_AVAIL);
+ return 1;
}
- dprintk(KERN_DEBUG "%s: nv_alloc_rx: Packet %d marked as Available\n",
- dev->name, refill_rx);
- refill_rx++;
}
- np->refill_rx = refill_rx;
- if (np->cur_rx - refill_rx == np->rx_ring_size)
- return 1;
return 0;
}
{
struct net_device *dev = (struct net_device *) data;
struct fe_priv *np = netdev_priv(dev);
+ int retcode;
if (!using_multi_irqs(dev)) {
if (np->msi_flags & NV_MSI_X_ENABLED)
} else {
disable_irq(np->msi_x_entry[NV_MSI_X_VECTOR_RX].vector);
}
- if (nv_alloc_rx(dev)) {
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ retcode = nv_alloc_rx(dev);
+ else
+ retcode = nv_alloc_rx_optimized(dev);
+ if (retcode) {
spin_lock_irq(&np->lock);
if (!np->in_shutdown)
mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
{
struct fe_priv *np = netdev_priv(dev);
int i;
+ np->get_rx = np->put_rx = np->first_rx = np->rx_ring;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->last_rx.orig = &np->rx_ring.orig[np->rx_ring_size-1];
+ else
+ np->last_rx.ex = &np->rx_ring.ex[np->rx_ring_size-1];
+ np->get_rx_ctx = np->put_rx_ctx = np->first_rx_ctx = np->rx_skb;
+ np->last_rx_ctx = &np->rx_skb[np->rx_ring_size-1];
- np->cur_rx = np->rx_ring_size;
- np->refill_rx = 0;
- for (i = 0; i < np->rx_ring_size; i++)
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ for (i = 0; i < np->rx_ring_size; i++) {
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->rx_ring.orig[i].flaglen = 0;
- else
+ np->rx_ring.orig[i].buf = 0;
+ } else {
np->rx_ring.ex[i].flaglen = 0;
+ np->rx_ring.ex[i].txvlan = 0;
+ np->rx_ring.ex[i].bufhigh = 0;
+ np->rx_ring.ex[i].buflow = 0;
+ }
+ np->rx_skb[i].skb = NULL;
+ np->rx_skb[i].dma = 0;
+ }
}
static void nv_init_tx(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
int i;
+ np->get_tx = np->put_tx = np->first_tx = np->tx_ring;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ np->last_tx.orig = &np->tx_ring.orig[np->tx_ring_size-1];
+ else
+ np->last_tx.ex = &np->tx_ring.ex[np->tx_ring_size-1];
+ np->get_tx_ctx = np->put_tx_ctx = np->first_tx_ctx = np->tx_skb;
+ np->last_tx_ctx = &np->tx_skb[np->tx_ring_size-1];
- np->next_tx = np->nic_tx = 0;
for (i = 0; i < np->tx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->tx_ring.orig[i].flaglen = 0;
- else
+ np->tx_ring.orig[i].buf = 0;
+ } else {
np->tx_ring.ex[i].flaglen = 0;
- np->tx_skbuff[i] = NULL;
- np->tx_dma[i] = 0;
+ np->tx_ring.ex[i].txvlan = 0;
+ np->tx_ring.ex[i].bufhigh = 0;
+ np->tx_ring.ex[i].buflow = 0;
+ }
+ np->tx_skb[i].skb = NULL;
+ np->tx_skb[i].dma = 0;
}
}
static int nv_init_ring(struct net_device *dev)
{
+ struct fe_priv *np = netdev_priv(dev);
+
nv_init_tx(dev);
nv_init_rx(dev);
- return nv_alloc_rx(dev);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ return nv_alloc_rx(dev);
+ else
+ return nv_alloc_rx_optimized(dev);
}
-static int nv_release_txskb(struct net_device *dev, unsigned int skbnr)
+static int nv_release_txskb(struct net_device *dev, struct nv_skb_map* tx_skb)
{
struct fe_priv *np = netdev_priv(dev);
- dprintk(KERN_INFO "%s: nv_release_txskb for skbnr %d\n",
- dev->name, skbnr);
-
- if (np->tx_dma[skbnr]) {
- pci_unmap_page(np->pci_dev, np->tx_dma[skbnr],
- np->tx_dma_len[skbnr],
+ if (tx_skb->dma) {
+ pci_unmap_page(np->pci_dev, tx_skb->dma,
+ tx_skb->dma_len,
PCI_DMA_TODEVICE);
- np->tx_dma[skbnr] = 0;
+ tx_skb->dma = 0;
}
-
- if (np->tx_skbuff[skbnr]) {
- dev_kfree_skb_any(np->tx_skbuff[skbnr]);
- np->tx_skbuff[skbnr] = NULL;
+ if (tx_skb->skb) {
+ dev_kfree_skb_any(tx_skb->skb);
+ tx_skb->skb = NULL;
return 1;
} else {
return 0;
unsigned int i;
for (i = 0; i < np->tx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->tx_ring.orig[i].flaglen = 0;
- else
+ np->tx_ring.orig[i].buf = 0;
+ } else {
np->tx_ring.ex[i].flaglen = 0;
- if (nv_release_txskb(dev, i))
+ np->tx_ring.ex[i].txvlan = 0;
+ np->tx_ring.ex[i].bufhigh = 0;
+ np->tx_ring.ex[i].buflow = 0;
+ }
+ if (nv_release_txskb(dev, &np->tx_skb[i]))
np->stats.tx_dropped++;
}
}
{
struct fe_priv *np = netdev_priv(dev);
int i;
+
for (i = 0; i < np->rx_ring_size; i++) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->rx_ring.orig[i].flaglen = 0;
- else
+ np->rx_ring.orig[i].buf = 0;
+ } else {
np->rx_ring.ex[i].flaglen = 0;
+ np->rx_ring.ex[i].txvlan = 0;
+ np->rx_ring.ex[i].bufhigh = 0;
+ np->rx_ring.ex[i].buflow = 0;
+ }
wmb();
- if (np->rx_skbuff[i]) {
- pci_unmap_single(np->pci_dev, np->rx_dma[i],
- np->rx_skbuff[i]->end-np->rx_skbuff[i]->data,
+ if (np->rx_skb[i].skb) {
+ pci_unmap_single(np->pci_dev, np->rx_skb[i].dma,
+ np->rx_skb[i].skb->end-np->rx_skb[i].skb->data,
PCI_DMA_FROMDEVICE);
- dev_kfree_skb(np->rx_skbuff[i]);
- np->rx_skbuff[i] = NULL;
+ dev_kfree_skb(np->rx_skb[i].skb);
+ np->rx_skb[i].skb = NULL;
}
}
}
nv_drain_rx(dev);
}
+static inline u32 nv_get_empty_tx_slots(struct fe_priv *np)
+{
+ return (u32)(np->tx_ring_size - ((np->tx_ring_size + (np->put_tx_ctx - np->get_tx_ctx)) % np->tx_ring_size));
+}
+
/*
* nv_start_xmit: dev->hard_start_xmit function
* Called with netif_tx_lock held.
u32 tx_flags = 0;
u32 tx_flags_extra = (np->desc_ver == DESC_VER_1 ? NV_TX_LASTPACKET : NV_TX2_LASTPACKET);
unsigned int fragments = skb_shinfo(skb)->nr_frags;
- unsigned int nr = (np->next_tx - 1) % np->tx_ring_size;
- unsigned int start_nr = np->next_tx % np->tx_ring_size;
unsigned int i;
u32 offset = 0;
u32 bcnt;
u32 size = skb->len-skb->data_len;
u32 entries = (size >> NV_TX2_TSO_MAX_SHIFT) + ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
- u32 tx_flags_vlan = 0;
+ u32 empty_slots;
+ struct ring_desc* put_tx;
+ struct ring_desc* start_tx;
+ struct ring_desc* prev_tx;
+ struct nv_skb_map* prev_tx_ctx;
/* add fragments to entries count */
for (i = 0; i < fragments; i++) {
((skb_shinfo(skb)->frags[i].size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
}
- spin_lock_irq(&np->lock);
-
- if ((np->next_tx - np->nic_tx + entries - 1) > np->tx_limit_stop) {
- spin_unlock_irq(&np->lock);
+ empty_slots = nv_get_empty_tx_slots(np);
+ if (unlikely(empty_slots <= entries)) {
+ spin_lock_irq(&np->lock);
netif_stop_queue(dev);
+ np->tx_stop = 1;
+ spin_unlock_irq(&np->lock);
return NETDEV_TX_BUSY;
}
+ start_tx = put_tx = np->put_tx.orig;
+
/* setup the header buffer */
do {
+ prev_tx = put_tx;
+ prev_tx_ctx = np->put_tx_ctx;
bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
- nr = (nr + 1) % np->tx_ring_size;
-
- np->tx_dma[nr] = pci_map_single(np->pci_dev, skb->data + offset, bcnt,
+ np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt,
PCI_DMA_TODEVICE);
- np->tx_dma_len[nr] = bcnt;
+ np->put_tx_ctx->dma_len = bcnt;
+ put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma);
+ put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]);
- np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- } else {
- np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
- np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
- np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- }
tx_flags = np->tx_flags;
offset += bcnt;
size -= bcnt;
+ if (unlikely(put_tx++ == np->last_tx.orig))
+ put_tx = np->first_tx.orig;
+ if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
+ np->put_tx_ctx = np->first_tx_ctx;
} while (size);
/* setup the fragments */
offset = 0;
do {
+ prev_tx = put_tx;
+ prev_tx_ctx = np->put_tx_ctx;
bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
- nr = (nr + 1) % np->tx_ring_size;
+ np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
+ PCI_DMA_TODEVICE);
+ np->put_tx_ctx->dma_len = bcnt;
+ put_tx->buf = cpu_to_le32(np->put_tx_ctx->dma);
+ put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- np->tx_dma[nr] = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
- PCI_DMA_TODEVICE);
- np->tx_dma_len[nr] = bcnt;
-
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- np->tx_ring.orig[nr].buf = cpu_to_le32(np->tx_dma[nr]);
- np->tx_ring.orig[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- } else {
- np->tx_ring.ex[nr].bufhigh = cpu_to_le64(np->tx_dma[nr]) >> 32;
- np->tx_ring.ex[nr].buflow = cpu_to_le64(np->tx_dma[nr]) & 0x0FFFFFFFF;
- np->tx_ring.ex[nr].flaglen = cpu_to_le32((bcnt-1) | tx_flags);
- }
offset += bcnt;
size -= bcnt;
+ if (unlikely(put_tx++ == np->last_tx.orig))
+ put_tx = np->first_tx.orig;
+ if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
+ np->put_tx_ctx = np->first_tx_ctx;
} while (size);
}
/* set last fragment flag */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- np->tx_ring.orig[nr].flaglen |= cpu_to_le32(tx_flags_extra);
- } else {
- np->tx_ring.ex[nr].flaglen |= cpu_to_le32(tx_flags_extra);
+ prev_tx->flaglen |= cpu_to_le32(tx_flags_extra);
+
+ /* save skb in this slot's context area */
+ prev_tx_ctx->skb = skb;
+
+ if (skb_is_gso(skb))
+ tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
+ else
+ tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
+ NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
+
+ spin_lock_irq(&np->lock);
+
+ /* set tx flags */
+ start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
+ np->put_tx.orig = put_tx;
+
+ spin_unlock_irq(&np->lock);
+
+ dprintk(KERN_DEBUG "%s: nv_start_xmit: entries %d queued for transmission. tx_flags_extra: %x\n",
+ dev->name, entries, tx_flags_extra);
+ {
+ int j;
+ for (j=0; j<64; j++) {
+ if ((j%16) == 0)
+ dprintk("\n%03x:", j);
+ dprintk(" %02x", ((unsigned char*)skb->data)[j]);
+ }
+ dprintk("\n");
}
- np->tx_skbuff[nr] = skb;
+ dev->trans_start = jiffies;
+ writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
+ return NETDEV_TX_OK;
+}
+
+static int nv_start_xmit_optimized(struct sk_buff *skb, struct net_device *dev)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u32 tx_flags = 0;
+ u32 tx_flags_extra;
+ unsigned int fragments = skb_shinfo(skb)->nr_frags;
+ unsigned int i;
+ u32 offset = 0;
+ u32 bcnt;
+ u32 size = skb->len-skb->data_len;
+ u32 entries = (size >> NV_TX2_TSO_MAX_SHIFT) + ((size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+ u32 empty_slots;
+ struct ring_desc_ex* put_tx;
+ struct ring_desc_ex* start_tx;
+ struct ring_desc_ex* prev_tx;
+ struct nv_skb_map* prev_tx_ctx;
+
+ /* add fragments to entries count */
+ for (i = 0; i < fragments; i++) {
+ entries += (skb_shinfo(skb)->frags[i].size >> NV_TX2_TSO_MAX_SHIFT) +
+ ((skb_shinfo(skb)->frags[i].size & (NV_TX2_TSO_MAX_SIZE-1)) ? 1 : 0);
+ }
+
+ empty_slots = nv_get_empty_tx_slots(np);
+ if (unlikely(empty_slots <= entries)) {
+ spin_lock_irq(&np->lock);
+ netif_stop_queue(dev);
+ np->tx_stop = 1;
+ spin_unlock_irq(&np->lock);
+ return NETDEV_TX_BUSY;
+ }
+
+ start_tx = put_tx = np->put_tx.ex;
+
+ /* setup the header buffer */
+ do {
+ prev_tx = put_tx;
+ prev_tx_ctx = np->put_tx_ctx;
+ bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+ np->put_tx_ctx->dma = pci_map_single(np->pci_dev, skb->data + offset, bcnt,
+ PCI_DMA_TODEVICE);
+ np->put_tx_ctx->dma_len = bcnt;
+ put_tx->bufhigh = cpu_to_le64(np->put_tx_ctx->dma) >> 32;
+ put_tx->buflow = cpu_to_le64(np->put_tx_ctx->dma) & 0x0FFFFFFFF;
+ put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
+
+ tx_flags = NV_TX2_VALID;
+ offset += bcnt;
+ size -= bcnt;
+ if (unlikely(put_tx++ == np->last_tx.ex))
+ put_tx = np->first_tx.ex;
+ if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
+ np->put_tx_ctx = np->first_tx_ctx;
+ } while (size);
+
+ /* setup the fragments */
+ for (i = 0; i < fragments; i++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ u32 size = frag->size;
+ offset = 0;
+
+ do {
+ prev_tx = put_tx;
+ prev_tx_ctx = np->put_tx_ctx;
+ bcnt = (size > NV_TX2_TSO_MAX_SIZE) ? NV_TX2_TSO_MAX_SIZE : size;
+ np->put_tx_ctx->dma = pci_map_page(np->pci_dev, frag->page, frag->page_offset+offset, bcnt,
+ PCI_DMA_TODEVICE);
+ np->put_tx_ctx->dma_len = bcnt;
+ put_tx->bufhigh = cpu_to_le64(np->put_tx_ctx->dma) >> 32;
+ put_tx->buflow = cpu_to_le64(np->put_tx_ctx->dma) & 0x0FFFFFFFF;
+ put_tx->flaglen = cpu_to_le32((bcnt-1) | tx_flags);
+
+ offset += bcnt;
+ size -= bcnt;
+ if (unlikely(put_tx++ == np->last_tx.ex))
+ put_tx = np->first_tx.ex;
+ if (unlikely(np->put_tx_ctx++ == np->last_tx_ctx))
+ np->put_tx_ctx = np->first_tx_ctx;
+ } while (size);
+ }
+
+ /* set last fragment flag */
+ prev_tx->flaglen |= cpu_to_le32(NV_TX2_LASTPACKET);
+
+ /* save skb in this slot's context area */
+ prev_tx_ctx->skb = skb;
-#ifdef NETIF_F_TSO
if (skb_is_gso(skb))
tx_flags_extra = NV_TX2_TSO | (skb_shinfo(skb)->gso_size << NV_TX2_TSO_SHIFT);
else
-#endif
- tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
+ tx_flags_extra = skb->ip_summed == CHECKSUM_PARTIAL ?
NV_TX2_CHECKSUM_L3 | NV_TX2_CHECKSUM_L4 : 0;
/* vlan tag */
- if (np->vlangrp && vlan_tx_tag_present(skb)) {
- tx_flags_vlan = NV_TX3_VLAN_TAG_PRESENT | vlan_tx_tag_get(skb);
+ if (likely(!np->vlangrp)) {
+ start_tx->txvlan = 0;
+ } else {
+ if (vlan_tx_tag_present(skb))
+ start_tx->txvlan = cpu_to_le32(NV_TX3_VLAN_TAG_PRESENT | vlan_tx_tag_get(skb));
+ else
+ start_tx->txvlan = 0;
}
+ spin_lock_irq(&np->lock);
+
/* set tx flags */
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- np->tx_ring.orig[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
- } else {
- np->tx_ring.ex[start_nr].txvlan = cpu_to_le32(tx_flags_vlan);
- np->tx_ring.ex[start_nr].flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
- }
+ start_tx->flaglen |= cpu_to_le32(tx_flags | tx_flags_extra);
+ np->put_tx.ex = put_tx;
+
+ spin_unlock_irq(&np->lock);
- dprintk(KERN_DEBUG "%s: nv_start_xmit: packet %d (entries %d) queued for transmission. tx_flags_extra: %x\n",
- dev->name, np->next_tx, entries, tx_flags_extra);
+ dprintk(KERN_DEBUG "%s: nv_start_xmit_optimized: entries %d queued for transmission. tx_flags_extra: %x\n",
+ dev->name, entries, tx_flags_extra);
{
int j;
for (j=0; j<64; j++) {
dprintk("\n");
}
- np->next_tx += entries;
-
dev->trans_start = jiffies;
- spin_unlock_irq(&np->lock);
writel(NVREG_TXRXCTL_KICK|np->txrxctl_bits, get_hwbase(dev) + NvRegTxRxControl);
- pci_push(get_hwbase(dev));
return NETDEV_TX_OK;
}
{
struct fe_priv *np = netdev_priv(dev);
u32 flags;
- unsigned int i;
- struct sk_buff *skb;
+ struct ring_desc* orig_get_tx = np->get_tx.orig;
- while (np->nic_tx != np->next_tx) {
- i = np->nic_tx % np->tx_ring_size;
+ while ((np->get_tx.orig != np->put_tx.orig) &&
+ !((flags = le32_to_cpu(np->get_tx.orig->flaglen)) & NV_TX_VALID)) {
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
- flags = le32_to_cpu(np->tx_ring.orig[i].flaglen);
- else
- flags = le32_to_cpu(np->tx_ring.ex[i].flaglen);
+ dprintk(KERN_DEBUG "%s: nv_tx_done: flags 0x%x.\n",
+ dev->name, flags);
+
+ pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma,
+ np->get_tx_ctx->dma_len,
+ PCI_DMA_TODEVICE);
+ np->get_tx_ctx->dma = 0;
- dprintk(KERN_DEBUG "%s: nv_tx_done: looking at packet %d, flags 0x%x.\n",
- dev->name, np->nic_tx, flags);
- if (flags & NV_TX_VALID)
- break;
if (np->desc_ver == DESC_VER_1) {
if (flags & NV_TX_LASTPACKET) {
- skb = np->tx_skbuff[i];
- if (flags & (NV_TX_RETRYERROR|NV_TX_CARRIERLOST|NV_TX_LATECOLLISION|
- NV_TX_UNDERFLOW|NV_TX_ERROR)) {
+ if (flags & NV_TX_ERROR) {
if (flags & NV_TX_UNDERFLOW)
np->stats.tx_fifo_errors++;
if (flags & NV_TX_CARRIERLOST)
np->stats.tx_errors++;
} else {
np->stats.tx_packets++;
- np->stats.tx_bytes += skb->len;
+ np->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
+ dev_kfree_skb_any(np->get_tx_ctx->skb);
+ np->get_tx_ctx->skb = NULL;
}
} else {
if (flags & NV_TX2_LASTPACKET) {
- skb = np->tx_skbuff[i];
- if (flags & (NV_TX2_RETRYERROR|NV_TX2_CARRIERLOST|NV_TX2_LATECOLLISION|
- NV_TX2_UNDERFLOW|NV_TX2_ERROR)) {
+ if (flags & NV_TX2_ERROR) {
if (flags & NV_TX2_UNDERFLOW)
np->stats.tx_fifo_errors++;
if (flags & NV_TX2_CARRIERLOST)
np->stats.tx_errors++;
} else {
np->stats.tx_packets++;
- np->stats.tx_bytes += skb->len;
+ np->stats.tx_bytes += np->get_tx_ctx->skb->len;
}
+ dev_kfree_skb_any(np->get_tx_ctx->skb);
+ np->get_tx_ctx->skb = NULL;
}
}
- nv_release_txskb(dev, i);
- np->nic_tx++;
+ if (unlikely(np->get_tx.orig++ == np->last_tx.orig))
+ np->get_tx.orig = np->first_tx.orig;
+ if (unlikely(np->get_tx_ctx++ == np->last_tx_ctx))
+ np->get_tx_ctx = np->first_tx_ctx;
+ }
+ if (unlikely((np->tx_stop == 1) && (np->get_tx.orig != orig_get_tx))) {
+ np->tx_stop = 0;
+ netif_wake_queue(dev);
+ }
+}
+
+static void nv_tx_done_optimized(struct net_device *dev, int limit)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u32 flags;
+ struct ring_desc_ex* orig_get_tx = np->get_tx.ex;
+
+ while ((np->get_tx.ex != np->put_tx.ex) &&
+ !((flags = le32_to_cpu(np->get_tx.ex->flaglen)) & NV_TX_VALID) &&
+ (limit-- > 0)) {
+
+ dprintk(KERN_DEBUG "%s: nv_tx_done_optimized: flags 0x%x.\n",
+ dev->name, flags);
+
+ pci_unmap_page(np->pci_dev, np->get_tx_ctx->dma,
+ np->get_tx_ctx->dma_len,
+ PCI_DMA_TODEVICE);
+ np->get_tx_ctx->dma = 0;
+
+ if (flags & NV_TX2_LASTPACKET) {
+ if (!(flags & NV_TX2_ERROR))
+ np->stats.tx_packets++;
+ dev_kfree_skb_any(np->get_tx_ctx->skb);
+ np->get_tx_ctx->skb = NULL;
+ }
+ if (unlikely(np->get_tx.ex++ == np->last_tx.ex))
+ np->get_tx.ex = np->first_tx.ex;
+ if (unlikely(np->get_tx_ctx++ == np->last_tx_ctx))
+ np->get_tx_ctx = np->first_tx_ctx;
}
- if (np->next_tx - np->nic_tx < np->tx_limit_start)
+ if (unlikely((np->tx_stop == 1) && (np->get_tx.ex != orig_get_tx))) {
+ np->tx_stop = 0;
netif_wake_queue(dev);
+ }
}
/*
{
int i;
- printk(KERN_INFO "%s: Ring at %lx: next %d nic %d\n",
- dev->name, (unsigned long)np->ring_addr,
- np->next_tx, np->nic_tx);
+ printk(KERN_INFO "%s: Ring at %lx\n",
+ dev->name, (unsigned long)np->ring_addr);
printk(KERN_INFO "%s: Dumping tx registers\n", dev->name);
for (i=0;i<=np->register_size;i+= 32) {
printk(KERN_INFO "%3x: %08x %08x %08x %08x %08x %08x %08x %08x\n",
nv_stop_tx(dev);
/* 2) check that the packets were not sent already: */
- nv_tx_done(dev);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ nv_tx_done(dev);
+ else
+ nv_tx_done_optimized(dev, np->tx_ring_size);
/* 3) if there are dead entries: clear everything */
- if (np->next_tx != np->nic_tx) {
+ if (np->get_tx_ctx != np->put_tx_ctx) {
printk(KERN_DEBUG "%s: tx_timeout: dead entries!\n", dev->name);
nv_drain_tx(dev);
- np->next_tx = np->nic_tx = 0;
+ nv_init_tx(dev);
setup_hw_rings(dev, NV_SETUP_TX_RING);
netif_wake_queue(dev);
}
dev->name);
return -1;
}
- dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
- dev->name, datalen);
- return datalen;
+ dprintk(KERN_DEBUG "%s: nv_getlen: accepting %d bytes.\n",
+ dev->name, datalen);
+ return datalen;
+ }
+}
+
+static int nv_rx_process(struct net_device *dev, int limit)
+{
+ struct fe_priv *np = netdev_priv(dev);
+ u32 flags;
+ u32 rx_processed_cnt = 0;
+ struct sk_buff *skb;
+ int len;
+
+ while((np->get_rx.orig != np->put_rx.orig) &&
+ !((flags = le32_to_cpu(np->get_rx.orig->flaglen)) & NV_RX_AVAIL) &&
+ (rx_processed_cnt++ < limit)) {
+
+ dprintk(KERN_DEBUG "%s: nv_rx_process: flags 0x%x.\n",
+ dev->name, flags);
+
+ /*
+ * the packet is for us - immediately tear down the pci mapping.
+ * TODO: check if a prefetch of the first cacheline improves
+ * the performance.
+ */
+ pci_unmap_single(np->pci_dev, np->get_rx_ctx->dma,
+ np->get_rx_ctx->dma_len,
+ PCI_DMA_FROMDEVICE);
+ skb = np->get_rx_ctx->skb;
+ np->get_rx_ctx->skb = NULL;
+
+ {
+ int j;
+ dprintk(KERN_DEBUG "Dumping packet (flags 0x%x).",flags);
+ for (j=0; j<64; j++) {
+ if ((j%16) == 0)
+ dprintk("\n%03x:", j);
+ dprintk(" %02x", ((unsigned char*)skb->data)[j]);
+ }
+ dprintk("\n");
+ }
+ /* look at what we actually got: */
+ if (np->desc_ver == DESC_VER_1) {
+ if (likely(flags & NV_RX_DESCRIPTORVALID)) {
+ len = flags & LEN_MASK_V1;
+ if (unlikely(flags & NV_RX_ERROR)) {
+ if (flags & NV_RX_ERROR4) {
+ len = nv_getlen(dev, skb->data, len);
+ if (len < 0) {
+ np->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ }
+ /* framing errors are soft errors */
+ else if (flags & NV_RX_FRAMINGERR) {
+ if (flags & NV_RX_SUBSTRACT1) {
+ len--;
+ }
+ }
+ /* the rest are hard errors */
+ else {
+ if (flags & NV_RX_MISSEDFRAME)
+ np->stats.rx_missed_errors++;
+ if (flags & NV_RX_CRCERR)
+ np->stats.rx_crc_errors++;
+ if (flags & NV_RX_OVERFLOW)
+ np->stats.rx_over_errors++;
+ np->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ }
+ } else {
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ } else {
+ if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
+ len = flags & LEN_MASK_V2;
+ if (unlikely(flags & NV_RX2_ERROR)) {
+ if (flags & NV_RX2_ERROR4) {
+ len = nv_getlen(dev, skb->data, len);
+ if (len < 0) {
+ np->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ }
+ /* framing errors are soft errors */
+ else if (flags & NV_RX2_FRAMINGERR) {
+ if (flags & NV_RX2_SUBSTRACT1) {
+ len--;
+ }
+ }
+ /* the rest are hard errors */
+ else {
+ if (flags & NV_RX2_CRCERR)
+ np->stats.rx_crc_errors++;
+ if (flags & NV_RX2_OVERFLOW)
+ np->stats.rx_over_errors++;
+ np->stats.rx_errors++;
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ }
+ if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK2)/*ip and tcp */ {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else {
+ if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK1 ||
+ (flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK3) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ }
+ } else {
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
+ }
+ /* got a valid packet - forward it to the network core */
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+ dprintk(KERN_DEBUG "%s: nv_rx_process: %d bytes, proto %d accepted.\n",
+ dev->name, len, skb->protocol);
+#ifdef CONFIG_FORCEDETH_NAPI
+ netif_receive_skb(skb);
+#else
+ netif_rx(skb);
+#endif
+ dev->last_rx = jiffies;
+ np->stats.rx_packets++;
+ np->stats.rx_bytes += len;
+next_pkt:
+ if (unlikely(np->get_rx.orig++ == np->last_rx.orig))
+ np->get_rx.orig = np->first_rx.orig;
+ if (unlikely(np->get_rx_ctx++ == np->last_rx_ctx))
+ np->get_rx_ctx = np->first_rx_ctx;
}
+
+ return rx_processed_cnt;
}
-static int nv_rx_process(struct net_device *dev, int limit)
+static int nv_rx_process_optimized(struct net_device *dev, int limit)
{
struct fe_priv *np = netdev_priv(dev);
u32 flags;
u32 vlanflags = 0;
- int count;
-
- for (count = 0; count < limit; ++count) {
- struct sk_buff *skb;
- int len;
- int i;
- if (np->cur_rx - np->refill_rx >= np->rx_ring_size)
- break; /* we scanned the whole ring - do not continue */
-
- i = np->cur_rx % np->rx_ring_size;
- if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
- flags = le32_to_cpu(np->rx_ring.orig[i].flaglen);
- len = nv_descr_getlength(&np->rx_ring.orig[i], np->desc_ver);
- } else {
- flags = le32_to_cpu(np->rx_ring.ex[i].flaglen);
- len = nv_descr_getlength_ex(&np->rx_ring.ex[i], np->desc_ver);
- vlanflags = le32_to_cpu(np->rx_ring.ex[i].buflow);
- }
+ u32 rx_processed_cnt = 0;
+ struct sk_buff *skb;
+ int len;
- dprintk(KERN_DEBUG "%s: nv_rx_process: looking at packet %d, flags 0x%x.\n",
- dev->name, np->cur_rx, flags);
+ while((np->get_rx.ex != np->put_rx.ex) &&
+ !((flags = le32_to_cpu(np->get_rx.ex->flaglen)) & NV_RX2_AVAIL) &&
+ (rx_processed_cnt++ < limit)) {
- if (flags & NV_RX_AVAIL)
- break; /* still owned by hardware, */
+ dprintk(KERN_DEBUG "%s: nv_rx_process_optimized: flags 0x%x.\n",
+ dev->name, flags);
/*
* the packet is for us - immediately tear down the pci mapping.
* TODO: check if a prefetch of the first cacheline improves
* the performance.
*/
- pci_unmap_single(np->pci_dev, np->rx_dma[i],
- np->rx_skbuff[i]->end-np->rx_skbuff[i]->data,
+ pci_unmap_single(np->pci_dev, np->get_rx_ctx->dma,
+ np->get_rx_ctx->dma_len,
PCI_DMA_FROMDEVICE);
+ skb = np->get_rx_ctx->skb;
+ np->get_rx_ctx->skb = NULL;
{
int j;
for (j=0; j<64; j++) {
if ((j%16) == 0)
dprintk("\n%03x:", j);
- dprintk(" %02x", ((unsigned char*)np->rx_skbuff[i]->data)[j]);
+ dprintk(" %02x", ((unsigned char*)skb->data)[j]);
}
dprintk("\n");
}
/* look at what we actually got: */
- if (np->desc_ver == DESC_VER_1) {
- if (!(flags & NV_RX_DESCRIPTORVALID))
- goto next_pkt;
-
- if (flags & NV_RX_ERROR) {
- if (flags & NV_RX_MISSEDFRAME) {
- np->stats.rx_missed_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & (NV_RX_ERROR1|NV_RX_ERROR2|NV_RX_ERROR3)) {
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & NV_RX_CRCERR) {
- np->stats.rx_crc_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & NV_RX_OVERFLOW) {
- np->stats.rx_over_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & NV_RX_ERROR4) {
- len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
- if (len < 0) {
- np->stats.rx_errors++;
- goto next_pkt;
- }
- }
- /* framing errors are soft errors. */
- if (flags & NV_RX_FRAMINGERR) {
- if (flags & NV_RX_SUBSTRACT1) {
- len--;
- }
- }
- }
- } else {
- if (!(flags & NV_RX2_DESCRIPTORVALID))
- goto next_pkt;
-
- if (flags & NV_RX2_ERROR) {
- if (flags & (NV_RX2_ERROR1|NV_RX2_ERROR2|NV_RX2_ERROR3)) {
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & NV_RX2_CRCERR) {
- np->stats.rx_crc_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
- if (flags & NV_RX2_OVERFLOW) {
- np->stats.rx_over_errors++;
- np->stats.rx_errors++;
- goto next_pkt;
- }
+ if (likely(flags & NV_RX2_DESCRIPTORVALID)) {
+ len = flags & LEN_MASK_V2;
+ if (unlikely(flags & NV_RX2_ERROR)) {
if (flags & NV_RX2_ERROR4) {
- len = nv_getlen(dev, np->rx_skbuff[i]->data, len);
+ len = nv_getlen(dev, skb->data, len);
if (len < 0) {
- np->stats.rx_errors++;
+ dev_kfree_skb(skb);
goto next_pkt;
}
}
/* framing errors are soft errors */
- if (flags & NV_RX2_FRAMINGERR) {
+ else if (flags & NV_RX2_FRAMINGERR) {
if (flags & NV_RX2_SUBSTRACT1) {
len--;
}
}
+ /* the rest are hard errors */
+ else {
+ dev_kfree_skb(skb);
+ goto next_pkt;
+ }
}
- if (np->rx_csum) {
- flags &= NV_RX2_CHECKSUMMASK;
- if (flags == NV_RX2_CHECKSUMOK1 ||
- flags == NV_RX2_CHECKSUMOK2 ||
- flags == NV_RX2_CHECKSUMOK3) {
- dprintk(KERN_DEBUG "%s: hw checksum hit!.\n", dev->name);
- np->rx_skbuff[i]->ip_summed = CHECKSUM_UNNECESSARY;
- } else {
- dprintk(KERN_DEBUG "%s: hwchecksum miss!.\n", dev->name);
+
+ if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK2)/*ip and tcp */ {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
+ } else {
+ if ((flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK1 ||
+ (flags & NV_RX2_CHECKSUMMASK) == NV_RX2_CHECKSUMOK3) {
+ skb->ip_summed = CHECKSUM_UNNECESSARY;
}
}
- }
- /* got a valid packet - forward it to the network core */
- skb = np->rx_skbuff[i];
- np->rx_skbuff[i] = NULL;
- skb_put(skb, len);
- skb->protocol = eth_type_trans(skb, dev);
- dprintk(KERN_DEBUG "%s: nv_rx_process: packet %d with %d bytes, proto %d accepted.\n",
- dev->name, np->cur_rx, len, skb->protocol);
+ /* got a valid packet - forward it to the network core */
+ skb_put(skb, len);
+ skb->protocol = eth_type_trans(skb, dev);
+ prefetch(skb->data);
+
+ dprintk(KERN_DEBUG "%s: nv_rx_process_optimized: %d bytes, proto %d accepted.\n",
+ dev->name, len, skb->protocol);
+
+ if (likely(!np->vlangrp)) {
#ifdef CONFIG_FORCEDETH_NAPI
- if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT))
- vlan_hwaccel_receive_skb(skb, np->vlangrp,
- vlanflags & NV_RX3_VLAN_TAG_MASK);
- else
- netif_receive_skb(skb);
+ netif_receive_skb(skb);
#else
- if (np->vlangrp && (vlanflags & NV_RX3_VLAN_TAG_PRESENT))
- vlan_hwaccel_rx(skb, np->vlangrp,
- vlanflags & NV_RX3_VLAN_TAG_MASK);
- else
- netif_rx(skb);
+ netif_rx(skb);
#endif
- dev->last_rx = jiffies;
- np->stats.rx_packets++;
- np->stats.rx_bytes += len;
+ } else {
+ vlanflags = le32_to_cpu(np->get_rx.ex->buflow);
+ if (vlanflags & NV_RX3_VLAN_TAG_PRESENT) {
+#ifdef CONFIG_FORCEDETH_NAPI
+ vlan_hwaccel_receive_skb(skb, np->vlangrp,
+ vlanflags & NV_RX3_VLAN_TAG_MASK);
+#else
+ vlan_hwaccel_rx(skb, np->vlangrp,
+ vlanflags & NV_RX3_VLAN_TAG_MASK);
+#endif
+ } else {
+#ifdef CONFIG_FORCEDETH_NAPI
+ netif_receive_skb(skb);
+#else
+ netif_rx(skb);
+#endif
+ }
+ }
+
+ dev->last_rx = jiffies;
+ np->stats.rx_packets++;
+ np->stats.rx_bytes += len;
+ } else {
+ dev_kfree_skb(skb);
+ }
next_pkt:
- np->cur_rx++;
+ if (unlikely(np->get_rx.ex++ == np->last_rx.ex))
+ np->get_rx.ex = np->first_rx.ex;
+ if (unlikely(np->get_rx_ctx++ == np->last_rx_ctx))
+ np->get_rx_ctx = np->first_rx_ctx;
}
- return count;
+ return rx_processed_cnt;
}
static void set_bufsize(struct net_device *dev)
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
writel(NVREG_IRQSTAT_MASK, base + NvRegMSIXIrqStatus);
}
- pci_push(base);
dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
if (!(events & np->irqmask))
break;
nv_tx_done(dev);
spin_unlock(&np->lock);
- if (events & NVREG_IRQ_LINK) {
+#ifdef CONFIG_FORCEDETH_NAPI
+ if (events & NVREG_IRQ_RX_ALL) {
+ netif_rx_schedule(dev);
+
+ /* Disable furthur receive irq's */
+ spin_lock(&np->lock);
+ np->irqmask &= ~NVREG_IRQ_RX_ALL;
+
+ if (np->msi_flags & NV_MSI_X_ENABLED)
+ writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
+ else
+ writel(np->irqmask, base + NvRegIrqMask);
+ spin_unlock(&np->lock);
+ }
+#else
+ if (nv_rx_process(dev, dev->weight)) {
+ if (unlikely(nv_alloc_rx(dev))) {
+ spin_lock(&np->lock);
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ spin_unlock(&np->lock);
+ }
+ }
+#endif
+ if (unlikely(events & NVREG_IRQ_LINK)) {
spin_lock(&np->lock);
nv_link_irq(dev);
spin_unlock(&np->lock);
}
- if (np->need_linktimer && time_after(jiffies, np->link_timeout)) {
+ if (unlikely(np->need_linktimer && time_after(jiffies, np->link_timeout))) {
spin_lock(&np->lock);
nv_linkchange(dev);
spin_unlock(&np->lock);
np->link_timeout = jiffies + LINK_TIMEOUT;
}
- if (events & (NVREG_IRQ_TX_ERR)) {
+ if (unlikely(events & (NVREG_IRQ_TX_ERR))) {
dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
dev->name, events);
}
- if (events & (NVREG_IRQ_UNKNOWN)) {
+ if (unlikely(events & (NVREG_IRQ_UNKNOWN))) {
printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n",
dev->name, events);
}
spin_unlock(&np->lock);
break;
}
+ if (unlikely(i > max_interrupt_work)) {
+ spin_lock(&np->lock);
+ /* disable interrupts on the nic */
+ if (!(np->msi_flags & NV_MSI_X_ENABLED))
+ writel(0, base + NvRegIrqMask);
+ else
+ writel(np->irqmask, base + NvRegIrqMask);
+ pci_push(base);
+
+ if (!np->in_shutdown) {
+ np->nic_poll_irq = np->irqmask;
+ mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
+ printk(KERN_DEBUG "%s: too many iterations (%d) in nv_nic_irq.\n", dev->name, i);
+ spin_unlock(&np->lock);
+ break;
+ }
+
+ }
+ dprintk(KERN_DEBUG "%s: nv_nic_irq completed\n", dev->name);
+
+ return IRQ_RETVAL(i);
+}
+
+#define TX_WORK_PER_LOOP 64
+#define RX_WORK_PER_LOOP 64
+/**
+ * All _optimized functions are used to help increase performance
+ * (reduce CPU and increase throughput). They use descripter version 3,
+ * compiler directives, and reduce memory accesses.
+ */
+static irqreturn_t nv_nic_irq_optimized(int foo, void *data)
+{
+ struct net_device *dev = (struct net_device *) data;
+ struct fe_priv *np = netdev_priv(dev);
+ u8 __iomem *base = get_hwbase(dev);
+ u32 events;
+ int i;
+
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_optimized\n", dev->name);
+
+ for (i=0; ; i++) {
+ if (!(np->msi_flags & NV_MSI_X_ENABLED)) {
+ events = readl(base + NvRegIrqStatus) & NVREG_IRQSTAT_MASK;
+ writel(NVREG_IRQSTAT_MASK, base + NvRegIrqStatus);
+ } else {
+ events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQSTAT_MASK;
+ writel(NVREG_IRQSTAT_MASK, base + NvRegMSIXIrqStatus);
+ }
+ dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
+ if (!(events & np->irqmask))
+ break;
+
+ spin_lock(&np->lock);
+ nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
+ spin_unlock(&np->lock);
+
#ifdef CONFIG_FORCEDETH_NAPI
if (events & NVREG_IRQ_RX_ALL) {
netif_rx_schedule(dev);
spin_unlock(&np->lock);
}
#else
- nv_rx_process(dev, dev->weight);
- if (nv_alloc_rx(dev)) {
+ if (nv_rx_process_optimized(dev, dev->weight)) {
+ if (unlikely(nv_alloc_rx_optimized(dev))) {
+ spin_lock(&np->lock);
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ spin_unlock(&np->lock);
+ }
+ }
+#endif
+ if (unlikely(events & NVREG_IRQ_LINK)) {
spin_lock(&np->lock);
- if (!np->in_shutdown)
- mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ nv_link_irq(dev);
spin_unlock(&np->lock);
}
-#endif
- if (i > max_interrupt_work) {
+ if (unlikely(np->need_linktimer && time_after(jiffies, np->link_timeout))) {
+ spin_lock(&np->lock);
+ nv_linkchange(dev);
+ spin_unlock(&np->lock);
+ np->link_timeout = jiffies + LINK_TIMEOUT;
+ }
+ if (unlikely(events & (NVREG_IRQ_TX_ERR))) {
+ dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
+ dev->name, events);
+ }
+ if (unlikely(events & (NVREG_IRQ_UNKNOWN))) {
+ printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n",
+ dev->name, events);
+ }
+ if (unlikely(events & NVREG_IRQ_RECOVER_ERROR)) {
+ spin_lock(&np->lock);
+ /* disable interrupts on the nic */
+ if (!(np->msi_flags & NV_MSI_X_ENABLED))
+ writel(0, base + NvRegIrqMask);
+ else
+ writel(np->irqmask, base + NvRegIrqMask);
+ pci_push(base);
+
+ if (!np->in_shutdown) {
+ np->nic_poll_irq = np->irqmask;
+ np->recover_error = 1;
+ mod_timer(&np->nic_poll, jiffies + POLL_WAIT);
+ }
+ spin_unlock(&np->lock);
+ break;
+ }
+
+ if (unlikely(i > max_interrupt_work)) {
spin_lock(&np->lock);
/* disable interrupts on the nic */
if (!(np->msi_flags & NV_MSI_X_ENABLED))
}
}
- dprintk(KERN_DEBUG "%s: nv_nic_irq completed\n", dev->name);
+ dprintk(KERN_DEBUG "%s: nv_nic_irq_optimized completed\n", dev->name);
return IRQ_RETVAL(i);
}
for (i=0; ; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_TX_ALL;
writel(NVREG_IRQ_TX_ALL, base + NvRegMSIXIrqStatus);
- pci_push(base);
dprintk(KERN_DEBUG "%s: tx irq: %08x\n", dev->name, events);
if (!(events & np->irqmask))
break;
spin_lock_irqsave(&np->lock, flags);
- nv_tx_done(dev);
+ nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
spin_unlock_irqrestore(&np->lock, flags);
- if (events & (NVREG_IRQ_TX_ERR)) {
+ if (unlikely(events & (NVREG_IRQ_TX_ERR))) {
dprintk(KERN_DEBUG "%s: received irq with events 0x%x. Probably TX fail.\n",
dev->name, events);
}
- if (i > max_interrupt_work) {
+ if (unlikely(i > max_interrupt_work)) {
spin_lock_irqsave(&np->lock, flags);
/* disable interrupts on the nic */
writel(NVREG_IRQ_TX_ALL, base + NvRegIrqMask);
u8 __iomem *base = get_hwbase(dev);
unsigned long flags;
- pkts = nv_rx_process(dev, limit);
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ pkts = nv_rx_process(dev, limit);
+ else
+ pkts = nv_rx_process_optimized(dev, limit);
if (nv_alloc_rx(dev)) {
spin_lock_irqsave(&np->lock, flags);
for (i=0; ; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_RX_ALL;
writel(NVREG_IRQ_RX_ALL, base + NvRegMSIXIrqStatus);
- pci_push(base);
dprintk(KERN_DEBUG "%s: rx irq: %08x\n", dev->name, events);
if (!(events & np->irqmask))
break;
- nv_rx_process(dev, dev->weight);
- if (nv_alloc_rx(dev)) {
- spin_lock_irqsave(&np->lock, flags);
- if (!np->in_shutdown)
- mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
- spin_unlock_irqrestore(&np->lock, flags);
+ if (nv_rx_process_optimized(dev, dev->weight)) {
+ if (unlikely(nv_alloc_rx_optimized(dev))) {
+ spin_lock_irqsave(&np->lock, flags);
+ if (!np->in_shutdown)
+ mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
+ spin_unlock_irqrestore(&np->lock, flags);
+ }
}
- if (i > max_interrupt_work) {
+ if (unlikely(i > max_interrupt_work)) {
spin_lock_irqsave(&np->lock, flags);
/* disable interrupts on the nic */
writel(NVREG_IRQ_RX_ALL, base + NvRegIrqMask);
for (i=0; ; i++) {
events = readl(base + NvRegMSIXIrqStatus) & NVREG_IRQ_OTHER;
writel(NVREG_IRQ_OTHER, base + NvRegMSIXIrqStatus);
- pci_push(base);
dprintk(KERN_DEBUG "%s: irq: %08x\n", dev->name, events);
if (!(events & np->irqmask))
break;
+ /* check tx in case we reached max loop limit in tx isr */
+ spin_lock_irqsave(&np->lock, flags);
+ nv_tx_done_optimized(dev, TX_WORK_PER_LOOP);
+ spin_unlock_irqrestore(&np->lock, flags);
+
if (events & NVREG_IRQ_LINK) {
spin_lock_irqsave(&np->lock, flags);
nv_link_irq(dev);
printk(KERN_DEBUG "%s: received irq with unknown events 0x%x. Please report\n",
dev->name, events);
}
- if (i > max_interrupt_work) {
+ if (unlikely(i > max_interrupt_work)) {
spin_lock_irqsave(&np->lock, flags);
/* disable interrupts on the nic */
writel(NVREG_IRQ_OTHER, base + NvRegIrqMask);
u8 __iomem *base = get_hwbase(dev);
int ret = 1;
int i;
+ irqreturn_t (*handler)(int foo, void *data);
+
+ if (intr_test) {
+ handler = nv_nic_irq_test;
+ } else {
+ if (np->desc_ver == DESC_VER_3)
+ handler = nv_nic_irq_optimized;
+ else
+ handler = nv_nic_irq;
+ }
if (np->msi_flags & NV_MSI_X_CAPABLE) {
for (i = 0; i < (np->msi_flags & NV_MSI_X_VECTORS_MASK); i++) {
set_msix_vector_map(dev, NV_MSI_X_VECTOR_OTHER, NVREG_IRQ_OTHER);
} else {
/* Request irq for all interrupts */
- if ((!intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
- (intr_test &&
- request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
+ if (request_irq(np->msi_x_entry[NV_MSI_X_VECTOR_ALL].vector, handler, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msix(np->pci_dev);
np->msi_flags &= ~NV_MSI_X_ENABLED;
if (ret != 0 && np->msi_flags & NV_MSI_CAPABLE) {
if ((ret = pci_enable_msi(np->pci_dev)) == 0) {
np->msi_flags |= NV_MSI_ENABLED;
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0)) {
+ if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0) {
printk(KERN_INFO "forcedeth: request_irq failed %d\n", ret);
pci_disable_msi(np->pci_dev);
np->msi_flags &= ~NV_MSI_ENABLED;
}
}
if (ret != 0) {
- if ((!intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq, IRQF_SHARED, dev->name, dev) != 0) ||
- (intr_test && request_irq(np->pci_dev->irq, &nv_nic_irq_test, IRQF_SHARED, dev->name, dev) != 0))
+ if (request_irq(np->pci_dev->irq, handler, IRQF_SHARED, dev->name, dev) != 0)
goto out_err;
}
{
struct net_device *dev = (struct net_device *) data;
struct fe_priv *np = netdev_priv(dev);
- u8 __iomem *base = get_hwbase(dev);
- np->estats.tx_bytes += readl(base + NvRegTxCnt);
- np->estats.tx_zero_rexmt += readl(base + NvRegTxZeroReXmt);
- np->estats.tx_one_rexmt += readl(base + NvRegTxOneReXmt);
- np->estats.tx_many_rexmt += readl(base + NvRegTxManyReXmt);
- np->estats.tx_late_collision += readl(base + NvRegTxLateCol);
- np->estats.tx_fifo_errors += readl(base + NvRegTxUnderflow);
- np->estats.tx_carrier_errors += readl(base + NvRegTxLossCarrier);
- np->estats.tx_excess_deferral += readl(base + NvRegTxExcessDef);
- np->estats.tx_retry_error += readl(base + NvRegTxRetryErr);
- np->estats.tx_deferral += readl(base + NvRegTxDef);
- np->estats.tx_packets += readl(base + NvRegTxFrame);
- np->estats.tx_pause += readl(base + NvRegTxPause);
- np->estats.rx_frame_error += readl(base + NvRegRxFrameErr);
- np->estats.rx_extra_byte += readl(base + NvRegRxExtraByte);
- np->estats.rx_late_collision += readl(base + NvRegRxLateCol);
- np->estats.rx_runt += readl(base + NvRegRxRunt);
- np->estats.rx_frame_too_long += readl(base + NvRegRxFrameTooLong);
- np->estats.rx_over_errors += readl(base + NvRegRxOverflow);
- np->estats.rx_crc_errors += readl(base + NvRegRxFCSErr);
- np->estats.rx_frame_align_error += readl(base + NvRegRxFrameAlignErr);
- np->estats.rx_length_error += readl(base + NvRegRxLenErr);
- np->estats.rx_unicast += readl(base + NvRegRxUnicast);
- np->estats.rx_multicast += readl(base + NvRegRxMulticast);
- np->estats.rx_broadcast += readl(base + NvRegRxBroadcast);
- np->estats.rx_bytes += readl(base + NvRegRxCnt);
- np->estats.rx_pause += readl(base + NvRegRxPause);
- np->estats.rx_drop_frame += readl(base + NvRegRxDropFrame);
- np->estats.rx_packets =
- np->estats.rx_unicast +
- np->estats.rx_multicast +
- np->estats.rx_broadcast;
- np->estats.rx_errors_total =
- np->estats.rx_crc_errors +
- np->estats.rx_over_errors +
- np->estats.rx_frame_error +
- (np->estats.rx_frame_align_error - np->estats.rx_extra_byte) +
- np->estats.rx_late_collision +
- np->estats.rx_runt +
- np->estats.rx_frame_too_long;
+ nv_get_hw_stats(dev);
if (!np->in_shutdown)
mod_timer(&np->stats_poll, jiffies + STATS_INTERVAL);
{
struct fe_priv *np = netdev_priv(dev);
u8 __iomem *base = get_hwbase(dev);
- u8 *rxtx_ring, *rx_skbuff, *tx_skbuff, *rx_dma, *tx_dma, *tx_dma_len;
+ u8 *rxtx_ring, *rx_skbuff, *tx_skbuff;
dma_addr_t ring_addr;
if (ring->rx_pending < RX_RING_MIN ||
sizeof(struct ring_desc_ex) * (ring->rx_pending + ring->tx_pending),
&ring_addr);
}
- rx_skbuff = kmalloc(sizeof(struct sk_buff*) * ring->rx_pending, GFP_KERNEL);
- rx_dma = kmalloc(sizeof(dma_addr_t) * ring->rx_pending, GFP_KERNEL);
- tx_skbuff = kmalloc(sizeof(struct sk_buff*) * ring->tx_pending, GFP_KERNEL);
- tx_dma = kmalloc(sizeof(dma_addr_t) * ring->tx_pending, GFP_KERNEL);
- tx_dma_len = kmalloc(sizeof(unsigned int) * ring->tx_pending, GFP_KERNEL);
- if (!rxtx_ring || !rx_skbuff || !rx_dma || !tx_skbuff || !tx_dma || !tx_dma_len) {
+ rx_skbuff = kmalloc(sizeof(struct nv_skb_map) * ring->rx_pending, GFP_KERNEL);
+ tx_skbuff = kmalloc(sizeof(struct nv_skb_map) * ring->tx_pending, GFP_KERNEL);
+ if (!rxtx_ring || !rx_skbuff || !tx_skbuff) {
/* fall back to old rings */
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
if (rxtx_ring)
}
if (rx_skbuff)
kfree(rx_skbuff);
- if (rx_dma)
- kfree(rx_dma);
if (tx_skbuff)
kfree(tx_skbuff);
- if (tx_dma)
- kfree(tx_dma);
- if (tx_dma_len)
- kfree(tx_dma_len);
goto exit;
}
/* set new values */
np->rx_ring_size = ring->rx_pending;
np->tx_ring_size = ring->tx_pending;
- np->tx_limit_stop = ring->tx_pending - TX_LIMIT_DIFFERENCE;
- np->tx_limit_start = ring->tx_pending - TX_LIMIT_DIFFERENCE - 1;
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->rx_ring.orig = (struct ring_desc*)rxtx_ring;
np->tx_ring.orig = &np->rx_ring.orig[np->rx_ring_size];
np->rx_ring.ex = (struct ring_desc_ex*)rxtx_ring;
np->tx_ring.ex = &np->rx_ring.ex[np->rx_ring_size];
}
- np->rx_skbuff = (struct sk_buff**)rx_skbuff;
- np->rx_dma = (dma_addr_t*)rx_dma;
- np->tx_skbuff = (struct sk_buff**)tx_skbuff;
- np->tx_dma = (dma_addr_t*)tx_dma;
- np->tx_dma_len = (unsigned int*)tx_dma_len;
+ np->rx_skb = (struct nv_skb_map*)rx_skbuff;
+ np->tx_skb = (struct nv_skb_map*)tx_skbuff;
np->ring_addr = ring_addr;
- memset(np->rx_skbuff, 0, sizeof(struct sk_buff*) * np->rx_ring_size);
- memset(np->rx_dma, 0, sizeof(dma_addr_t) * np->rx_ring_size);
- memset(np->tx_skbuff, 0, sizeof(struct sk_buff*) * np->tx_ring_size);
- memset(np->tx_dma, 0, sizeof(dma_addr_t) * np->tx_ring_size);
- memset(np->tx_dma_len, 0, sizeof(unsigned int) * np->tx_ring_size);
+ memset(np->rx_skb, 0, sizeof(struct nv_skb_map) * np->rx_ring_size);
+ memset(np->tx_skb, 0, sizeof(struct nv_skb_map) * np->tx_ring_size);
if (netif_running(dev)) {
/* reinit driver view of the queues */
{
struct fe_priv *np = netdev_priv(dev);
- if (np->driver_data & DEV_HAS_STATISTICS)
- return sizeof(struct nv_ethtool_stats)/sizeof(u64);
+ if (np->driver_data & DEV_HAS_STATISTICS_V1)
+ return NV_DEV_STATISTICS_V1_COUNT;
+ else if (np->driver_data & DEV_HAS_STATISTICS_V2)
+ return NV_DEV_STATISTICS_V2_COUNT;
else
return 0;
}
dprintk(KERN_DEBUG "%s: loopback len mismatch %d vs %d\n",
dev->name, len, pkt_len);
} else {
- rx_skb = np->rx_skbuff[0];
+ rx_skb = np->rx_skb[0].skb;
for (i = 0; i < pkt_len; i++) {
if (rx_skb->data[i] != (u8)(i & 0xff)) {
ret = 0;
mod_timer(&np->oom_kick, jiffies + OOM_REFILL);
/* start statistics timer */
- if (np->driver_data & DEV_HAS_STATISTICS)
+ if (np->driver_data & (DEV_HAS_STATISTICS_V1|DEV_HAS_STATISTICS_V2))
mod_timer(&np->stats_poll, jiffies + STATS_INTERVAL);
spin_unlock_irq(&np->lock);
if (err < 0)
goto out_disable;
- if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS))
+ if (id->driver_data & (DEV_HAS_VLAN|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V2))
+ np->register_size = NV_PCI_REGSZ_VER3;
+ else if (id->driver_data & DEV_HAS_STATISTICS_V1)
np->register_size = NV_PCI_REGSZ_VER2;
else
np->register_size = NV_PCI_REGSZ_VER1;
np->rx_csum = 1;
np->txrxctl_bits |= NVREG_TXRXCTL_RXCHECK;
dev->features |= NETIF_F_HW_CSUM | NETIF_F_SG;
-#ifdef NETIF_F_TSO
dev->features |= NETIF_F_TSO;
-#endif
- }
+ }
np->vlanctl_bits = 0;
if (id->driver_data & DEV_HAS_VLAN) {
np->rx_ring_size = RX_RING_DEFAULT;
np->tx_ring_size = TX_RING_DEFAULT;
- np->tx_limit_stop = np->tx_ring_size - TX_LIMIT_DIFFERENCE;
- np->tx_limit_start = np->tx_ring_size - TX_LIMIT_DIFFERENCE - 1;
if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2) {
np->rx_ring.orig = pci_alloc_consistent(pci_dev,
goto out_unmap;
np->tx_ring.ex = &np->rx_ring.ex[np->rx_ring_size];
}
- np->rx_skbuff = kmalloc(sizeof(struct sk_buff*) * np->rx_ring_size, GFP_KERNEL);
- np->rx_dma = kmalloc(sizeof(dma_addr_t) * np->rx_ring_size, GFP_KERNEL);
- np->tx_skbuff = kmalloc(sizeof(struct sk_buff*) * np->tx_ring_size, GFP_KERNEL);
- np->tx_dma = kmalloc(sizeof(dma_addr_t) * np->tx_ring_size, GFP_KERNEL);
- np->tx_dma_len = kmalloc(sizeof(unsigned int) * np->tx_ring_size, GFP_KERNEL);
- if (!np->rx_skbuff || !np->rx_dma || !np->tx_skbuff || !np->tx_dma || !np->tx_dma_len)
+ np->rx_skb = kmalloc(sizeof(struct nv_skb_map) * np->rx_ring_size, GFP_KERNEL);
+ np->tx_skb = kmalloc(sizeof(struct nv_skb_map) * np->tx_ring_size, GFP_KERNEL);
+ if (!np->rx_skb || !np->tx_skb)
goto out_freering;
- memset(np->rx_skbuff, 0, sizeof(struct sk_buff*) * np->rx_ring_size);
- memset(np->rx_dma, 0, sizeof(dma_addr_t) * np->rx_ring_size);
- memset(np->tx_skbuff, 0, sizeof(struct sk_buff*) * np->tx_ring_size);
- memset(np->tx_dma, 0, sizeof(dma_addr_t) * np->tx_ring_size);
- memset(np->tx_dma_len, 0, sizeof(unsigned int) * np->tx_ring_size);
+ memset(np->rx_skb, 0, sizeof(struct nv_skb_map) * np->rx_ring_size);
+ memset(np->tx_skb, 0, sizeof(struct nv_skb_map) * np->tx_ring_size);
dev->open = nv_open;
dev->stop = nv_close;
- dev->hard_start_xmit = nv_start_xmit;
+ if (np->desc_ver == DESC_VER_1 || np->desc_ver == DESC_VER_2)
+ dev->hard_start_xmit = nv_start_xmit;
+ else
+ dev->hard_start_xmit = nv_start_xmit_optimized;
dev->get_stats = nv_get_stats;
dev->change_mtu = nv_change_mtu;
dev->set_mac_address = nv_set_mac_address;
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = nv_poll_controller;
#endif
- dev->weight = 64;
+ dev->weight = RX_WORK_PER_LOOP;
#ifdef CONFIG_FORCEDETH_NAPI
dev->poll = nv_napi_poll;
#endif
},
{ /* CK804 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_8),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1,
},
{ /* CK804 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_9),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1,
},
{ /* MCP04 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_10),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1,
},
{ /* MCP04 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_11),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_STATISTICS_V1,
},
{ /* MCP51 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_12),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
},
{ /* MCP51 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_13),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_STATISTICS_V1,
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_14),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP55 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_VLAN|DEV_HAS_MSI|DEV_HAS_MSI_X|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP61 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_16),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP61 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_17),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP61 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_18),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP61 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_19),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27),
- .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
+ .driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT,
},
{0,},
};
goto out2;
#endif
#ifdef CONFIG_PCI
- err = pci_module_init(&hp100_pci_driver);
+ err = pci_register_driver(&hp100_pci_driver);
if (err && err != -ENODEV)
goto out3;
#endif
}
kobject_init(&port->kobject);
- port->kobject.parent = &dev->class_dev.kobj;
+ port->kobject.parent = &dev->dev.kobj;
port->kobject.ktype = &veth_port_ktype;
kobject_set_name(&port->kobject, "veth_port");
if (0 != kobject_add(&port->kobject))
#include <net/pkt_sched.h>
#include <linux/list.h>
#include <linux/reboot.h>
-#ifdef NETIF_F_TSO
#include <net/checksum.h>
-#endif
#include <linux/ethtool.h>
#include <linux/if_vlan.h>
{"tx_restart_queue", IXGB_STAT(restart_queue) },
{"rx_long_length_errors", IXGB_STAT(stats.roc)},
{"rx_short_length_errors", IXGB_STAT(stats.ruc)},
-#ifdef NETIF_F_TSO
{"tx_tcp_seg_good", IXGB_STAT(stats.tsctc)},
{"tx_tcp_seg_failed", IXGB_STAT(stats.tsctfc)},
-#endif
{"rx_flow_control_xon", IXGB_STAT(stats.xonrxc)},
{"rx_flow_control_xoff", IXGB_STAT(stats.xoffrxc)},
{"tx_flow_control_xon", IXGB_STAT(stats.xontxc)},
return 0;
}
-#ifdef NETIF_F_TSO
static int
ixgb_set_tso(struct net_device *netdev, uint32_t data)
{
netdev->features &= ~NETIF_F_TSO;
return 0;
}
-#endif /* NETIF_F_TSO */
static uint32_t
ixgb_get_msglevel(struct net_device *netdev)
.set_sg = ethtool_op_set_sg,
.get_msglevel = ixgb_get_msglevel,
.set_msglevel = ixgb_set_msglevel,
-#ifdef NETIF_F_TSO
.get_tso = ethtool_op_get_tso,
.set_tso = ixgb_set_tso,
-#endif
.get_strings = ixgb_get_strings,
.phys_id = ixgb_phys_id,
.get_stats_count = ixgb_get_stats_count,
NETIF_F_HW_VLAN_TX |
NETIF_F_HW_VLAN_RX |
NETIF_F_HW_VLAN_FILTER;
-#ifdef NETIF_F_TSO
netdev->features |= NETIF_F_TSO;
-#endif
#ifdef NETIF_F_LLTX
netdev->features |= NETIF_F_LLTX;
#endif
static int
ixgb_tso(struct ixgb_adapter *adapter, struct sk_buff *skb)
{
-#ifdef NETIF_F_TSO
struct ixgb_context_desc *context_desc;
unsigned int i;
uint8_t ipcss, ipcso, tucss, tucso, hdr_len;
return 1;
}
-#endif
return 0;
}
struct pci_dev *pdev = adapter->pdev;
/* Prevent stats update while adapter is being reset */
- if (pdev->error_state && pdev->error_state != pci_channel_io_normal)
+ if (pci_channel_offline(pdev))
return;
if((netdev->flags & IFF_PROMISC) || (netdev->flags & IFF_ALLMULTI) ||
#include "macb.h"
-#define to_net_dev(class) container_of(class, struct net_device, class_dev)
-
#define RX_BUFFER_SIZE 128
#define RX_RING_SIZE 512
#define RX_RING_BYTES (sizeof(struct dma_desc) * RX_RING_SIZE)
return ret;
}
-static ssize_t macb_mii_show(const struct class_device *cd, char *buf,
+static ssize_t macb_mii_show(const struct device *_dev, char *buf,
unsigned long addr)
{
- struct net_device *dev = to_net_dev(cd);
+ struct net_device *dev = to_net_dev(_dev);
struct macb *bp = netdev_priv(dev);
ssize_t ret = -EINVAL;
}
#define MII_ENTRY(name, addr) \
-static ssize_t show_##name(struct class_device *cd, char *buf) \
+static ssize_t show_##name(struct device *_dev, \
+ struct device_attribute *attr, \
+ char *buf) \
{ \
- return macb_mii_show(cd, buf, addr); \
+ return macb_mii_show(_dev, buf, addr); \
} \
-static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
MII_ENTRY(bmcr, MII_BMCR);
MII_ENTRY(bmsr, MII_BMSR);
MII_ENTRY(expansion, MII_EXPANSION);
static struct attribute *macb_mii_attrs[] = {
- &class_device_attr_bmcr.attr,
- &class_device_attr_bmsr.attr,
- &class_device_attr_physid1.attr,
- &class_device_attr_physid2.attr,
- &class_device_attr_advertise.attr,
- &class_device_attr_lpa.attr,
- &class_device_attr_expansion.attr,
+ &dev_attr_bmcr.attr,
+ &dev_attr_bmsr.attr,
+ &dev_attr_physid1.attr,
+ &dev_attr_physid2.attr,
+ &dev_attr_advertise.attr,
+ &dev_attr_lpa.attr,
+ &dev_attr_expansion.attr,
NULL,
};
static void macb_unregister_sysfs(struct net_device *net)
{
- struct class_device *class_dev = &net->class_dev;
+ struct device *_dev = &net->dev;
- sysfs_remove_group(&class_dev->kobj, &macb_mii_group);
+ sysfs_remove_group(&_dev->kobj, &macb_mii_group);
}
static int macb_register_sysfs(struct net_device *net)
{
- struct class_device *class_dev = &net->class_dev;
+ struct device *_dev = &net->dev;
int ret;
- ret = sysfs_create_group(&class_dev->kobj, &macb_mii_group);
+ ret = sysfs_create_group(&_dev->kobj, &macb_mii_group);
if (ret)
printk(KERN_WARNING
"%s: sysfs mii attribute registration failed: %d\n",
spin_lock_init(&bp->lock);
+#if defined(CONFIG_ARCH_AT91)
+ bp->pclk = clk_get(&pdev->dev, "macb_clk");
+ if (IS_ERR(bp->pclk)) {
+ dev_err(&pdev->dev, "failed to get macb_clk\n");
+ goto err_out_free_dev;
+ }
+ clk_enable(bp->pclk);
+#else
bp->pclk = clk_get(&pdev->dev, "pclk");
if (IS_ERR(bp->pclk)) {
dev_err(&pdev->dev, "failed to get pclk\n");
clk_enable(bp->pclk);
clk_enable(bp->hclk);
+#endif
bp->regs = ioremap(regs->start, regs->end - regs->start + 1);
if (!bp->regs) {
pdata = pdev->dev.platform_data;
if (pdata && pdata->is_rmii)
+#if defined(CONFIG_ARCH_AT91)
+ macb_writel(bp, USRIO, (MACB_BIT(RMII) | MACB_BIT(CLKEN)) );
+#else
macb_writel(bp, USRIO, 0);
+#endif
else
+#if defined(CONFIG_ARCH_AT91)
+ macb_writel(bp, USRIO, MACB_BIT(CLKEN));
+#else
macb_writel(bp, USRIO, MACB_BIT(MII));
+#endif
bp->tx_pending = DEF_TX_RING_PENDING;
err_out_iounmap:
iounmap(bp->regs);
err_out_disable_clocks:
+#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
- clk_disable(bp->pclk);
clk_put(bp->hclk);
+#endif
+ clk_disable(bp->pclk);
err_out_put_pclk:
clk_put(bp->pclk);
err_out_free_dev:
unregister_netdev(dev);
free_irq(dev->irq, dev);
iounmap(bp->regs);
+#ifndef CONFIG_ARCH_AT91
clk_disable(bp->hclk);
- clk_disable(bp->pclk);
clk_put(bp->hclk);
+#endif
+ clk_disable(bp->pclk);
clk_put(bp->pclk);
free_netdev(dev);
platform_set_drvdata(pdev, NULL);
#define MACB_SOF_OFFSET 30
#define MACB_SOF_SIZE 2
-/* Bitfields in USRIO */
+/* Bitfields in USRIO (AVR32) */
#define MACB_MII_OFFSET 0
#define MACB_MII_SIZE 1
#define MACB_EAM_OFFSET 1
#define MACB_TX_PAUSE_ZERO_OFFSET 3
#define MACB_TX_PAUSE_ZERO_SIZE 1
+/* Bitfields in USRIO (AT91) */
+#define MACB_RMII_OFFSET 0
+#define MACB_RMII_SIZE 1
+#define MACB_CLKEN_OFFSET 1
+#define MACB_CLKEN_SIZE 1
+
/* Bitfields in WOL */
#define MACB_IP_OFFSET 0
#define MACB_IP_SIZE 16
#include <linux/init.h>
#include <linux/crc32.h>
#include <linux/spinlock.h>
+#include <linux/bitrev.h>
#include <asm/prom.h>
#include <asm/dbdma.h>
#include <asm/io.h>
#define PRIV_BYTES (sizeof(struct mace_data) \
+ (N_RX_RING + NCMDS_TX * N_TX_RING + 3) * sizeof(struct dbdma_cmd))
-static int bitrev(int);
static int mace_open(struct net_device *dev);
static int mace_close(struct net_device *dev);
static int mace_xmit_start(struct sk_buff *skb, struct net_device *dev);
*/
static unsigned char *dummy_buf;
-/* Bit-reverse one byte of an ethernet hardware address. */
-static inline int
-bitrev(int b)
-{
- int d = 0, i;
-
- for (i = 0; i < 8; ++i, b >>= 1)
- d = (d << 1) | (b & 1);
- return d;
-}
-
-
static int __devinit mace_probe(struct macio_dev *mdev, const struct of_device_id *match)
{
struct device_node *mace = macio_get_of_node(mdev);
rev = addr[0] == 0 && addr[1] == 0xA0;
for (j = 0; j < 6; ++j) {
- dev->dev_addr[j] = rev? bitrev(addr[j]): addr[j];
+ dev->dev_addr[j] = rev ? bitrev8(addr[j]): addr[j];
}
mp->chipid = (in_8(&mp->mace->chipid_hi) << 8) |
in_8(&mp->mace->chipid_lo);
#include <linux/delay.h>
#include <linux/string.h>
#include <linux/crc32.h>
+#include <linux/bitrev.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
static irqreturn_t mace_dma_intr(int irq, void *dev_id);
static void mace_tx_timeout(struct net_device *dev);
-/* Bit-reverse one byte of an ethernet hardware address. */
-
-static int bitrev(int b)
-{
- int d = 0, i;
-
- for (i = 0; i < 8; ++i, b >>= 1) {
- d = (d << 1) | (b & 1);
- }
-
- return d;
-}
-
/*
* Load a receive DMA channel with a base address and ring length
*/
addr = (void *)MACE_PROM;
for (j = 0; j < 6; ++j) {
- u8 v=bitrev(addr[j<<4]);
+ u8 v = bitrev8(addr[j<<4]);
checksum ^= v;
dev->dev_addr[j] = v;
}
for (; j < 8; ++j) {
- checksum ^= bitrev(addr[j<<4]);
+ checksum ^= bitrev8(addr[j<<4]);
}
if (checksum != 0xFF) {
* For reversing the PROM address
*/
-static unsigned char nibbletab[] = {0, 8, 4, 12, 2, 10, 6, 14,
- 1, 9, 5, 13, 3, 11, 7, 15};
-
static inline void bit_reverse_addr(unsigned char addr[6])
{
int i;
for(i = 0; i < 6; i++)
- addr[i] = ((nibbletab[addr[i] & 0xf] << 4) |
- nibbletab[(addr[i] >> 4) &0xf]);
+ addr[i] = bitrev8(addr[i]);
}
int __init macsonic_init(struct net_device* dev)
.set_tx_csum = ethtool_op_set_tx_hw_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
.get_tso = ethtool_op_get_tso,
.set_tso = ethtool_op_set_tso,
-#endif
.get_strings = myri10ge_get_strings,
.get_stats_count = myri10ge_get_stats_count,
.get_ethtool_stats = myri10ge_get_ethtool_stats,
mss = 0;
max_segments = MXGEFW_MAX_SEND_DESC;
-#ifdef NETIF_F_TSO
if (skb->len > (dev->mtu + ETH_HLEN)) {
mss = skb_shinfo(skb)->gso_size;
if (mss != 0)
max_segments = MYRI10GE_MAX_SEND_DESC_TSO;
}
-#endif /*NETIF_F_TSO */
if ((unlikely(avail < max_segments))) {
/* we are out of transmit resources */
cum_len = 0;
-#ifdef NETIF_F_TSO
if (mss) { /* TSO */
/* this removes any CKSUM flag from before */
flags = (MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST);
* the checksum by parsing the header. */
pseudo_hdr_offset = mss;
} else
-#endif /*NETIF_F_TSO */
/* Mark small packets, and pad out tiny packets */
if (skb->len <= MXGEFW_SEND_SMALL_SIZE) {
flags |= MXGEFW_FLAGS_SMALL;
seglen = len;
flags_next = flags & ~MXGEFW_FLAGS_FIRST;
cum_len_next = cum_len + seglen;
-#ifdef NETIF_F_TSO
if (mss) { /* TSO */
(req - rdma_count)->rdma_count = rdma_count + 1;
(small * MXGEFW_FLAGS_SMALL);
}
}
-#endif /* NETIF_F_TSO */
req->addr_high = high_swapped;
req->addr_low = htonl(low);
req->pseudo_hdr_offset = htons(pseudo_hdr_offset);
}
(req - rdma_count)->rdma_count = rdma_count;
-#ifdef NETIF_F_TSO
if (mss)
do {
req--;
req->flags |= MXGEFW_FLAGS_TSO_LAST;
} while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP |
MXGEFW_FLAGS_FIRST)));
-#endif
idx = ((count - 1) + tx->req) & tx->mask;
tx->info[idx].last = 1;
if (tx->wc_fifo == NULL)
#include "netxen_nic_hw.h"
-#define NETXEN_NIC_BUILD_NO "2"
#define _NETXEN_NIC_LINUX_MAJOR 3
#define _NETXEN_NIC_LINUX_MINOR 3
#define _NETXEN_NIC_LINUX_SUBVERSION 3
-#define NETXEN_NIC_LINUX_VERSIONID "3.3.3" "-" NETXEN_NIC_BUILD_NO
+#define NETXEN_NIC_LINUX_VERSIONID "3.3.3"
+
+#define NUM_FLASH_SECTORS (64)
+#define FLASH_SECTOR_SIZE (64 * 1024)
+#define FLASH_TOTAL_SIZE (NUM_FLASH_SECTORS * FLASH_SECTOR_SIZE)
#define RCV_DESC_RINGSIZE \
(sizeof(struct rcv_desc) * adapter->max_rx_desc_count)
#define NETXEN_RCV_PRODUCER_OFFSET 0
#define NETXEN_RCV_PEG_DB_ID 2
#define NETXEN_HOST_DUMMY_DMA_SIZE 1024
+#define FLASH_SUCCESS 0
#define ADDR_IN_WINDOW1(off) \
((off > NETXEN_CRB_PCIX_HOST2) && (off < NETXEN_CRB_MAX)) ? 1 : 0
void netxen_load_firmware(struct netxen_adapter *adapter);
int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose);
int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp);
+int netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
+ u8 *bytes, size_t size);
+int netxen_rom_fast_write_words(struct netxen_adapter *adapter, int addr,
+ u8 *bytes, size_t size);
+int netxen_flash_unlock(struct netxen_adapter *adapter);
+int netxen_backup_crbinit(struct netxen_adapter *adapter);
+int netxen_flash_erase_secondary(struct netxen_adapter *adapter);
+int netxen_flash_erase_primary(struct netxen_adapter *adapter);
+
int netxen_rom_fast_write(struct netxen_adapter *adapter, int addr, int data);
int netxen_rom_se(struct netxen_adapter *adapter, int addr);
int netxen_do_rom_se(struct netxen_adapter *adapter, int addr);
*/
#include <linux/types.h>
+#include <linux/delay.h>
#include <asm/uaccess.h>
#include <linux/pci.h>
#include <asm/io.h>
static int netxen_nic_get_eeprom_len(struct net_device *dev)
{
- struct netxen_port *port = netdev_priv(dev);
- struct netxen_adapter *adapter = port->adapter;
- int n;
-
- if ((netxen_rom_fast_read(adapter, 0, &n) == 0)
- && (n & NETXEN_ROM_ROUNDUP)) {
- n &= ~NETXEN_ROM_ROUNDUP;
- if (n < NETXEN_MAX_EEPROM_LEN)
- return n;
- }
- return 0;
+ return FLASH_TOTAL_SIZE;
}
static void
struct netxen_port *port = netdev_priv(dev);
struct netxen_adapter *adapter = port->adapter;
int offset;
+ int ret;
if (eeprom->len == 0)
return -EINVAL;
eeprom->magic = (port->pdev)->vendor | ((port->pdev)->device << 16);
- for (offset = 0; offset < eeprom->len; offset++)
- if (netxen_rom_fast_read
- (adapter, (8 * offset) + 8, (int *)eeprom->data) == -1)
- return -EIO;
+ offset = eeprom->offset;
+
+ ret = netxen_rom_fast_read_words(adapter, offset, bytes,
+ eeprom->len);
+ if (ret < 0)
+ return ret;
+
return 0;
}
+static int
+netxen_nic_set_eeprom(struct net_device *dev, struct ethtool_eeprom *eeprom,
+ u8 * bytes)
+{
+ struct netxen_port *port = netdev_priv(dev);
+ struct netxen_adapter *adapter = port->adapter;
+ int offset = eeprom->offset;
+ static int flash_start;
+ static int ready_to_flash;
+ int ret;
+
+ if (flash_start == 0) {
+ ret = netxen_flash_unlock(adapter);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: Flash unlock failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: flash unlocked. \n",
+ netxen_nic_driver_name);
+ ret = netxen_flash_erase_secondary(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: Flash erase failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: secondary flash erased successfully.\n",
+ netxen_nic_driver_name);
+ flash_start = 1;
+ return 0;
+ }
+
+ if (offset == BOOTLD_START) {
+ ret = netxen_flash_erase_primary(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: Flash erase failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+
+ ret = netxen_rom_se(adapter, USER_START);
+ if (ret != FLASH_SUCCESS)
+ return ret;
+ ret = netxen_rom_se(adapter, FIXED_START);
+ if (ret != FLASH_SUCCESS)
+ return ret;
+
+ printk(KERN_INFO "%s: primary flash erased successfully\n",
+ netxen_nic_driver_name);
+
+ ret = netxen_backup_crbinit(adapter);
+ if (ret != FLASH_SUCCESS) {
+ printk(KERN_ERR "%s: CRBinit backup failed.\n",
+ netxen_nic_driver_name);
+ return ret;
+ }
+ printk(KERN_INFO "%s: CRBinit backup done.\n",
+ netxen_nic_driver_name);
+ ready_to_flash = 1;
+ }
+
+ if (!ready_to_flash) {
+ printk(KERN_ERR "%s: Invalid write sequence, returning...\n",
+ netxen_nic_driver_name);
+ return -EINVAL;
+ }
+
+ return netxen_rom_fast_write_words(adapter, offset, bytes, eeprom->len);
+}
+
static void
netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring)
{
.get_link = netxen_nic_get_link,
.get_eeprom_len = netxen_nic_get_eeprom_len,
.get_eeprom = netxen_nic_get_eeprom,
+ .set_eeprom = netxen_nic_set_eeprom,
.get_ringparam = netxen_nic_get_ringparam,
.get_pauseparam = netxen_nic_get_pauseparam,
.set_pauseparam = netxen_nic_set_pauseparam,
crb_addr_transform(CAM);
crb_addr_transform(C2C1);
crb_addr_transform(C2C0);
+ crb_addr_transform(SMB);
}
int netxen_init_firmware(struct netxen_adapter *adapter)
static long rom_max_timeout = 10000;
static long rom_lock_timeout = 1000000;
+static long rom_write_timeout = 700;
static inline int rom_lock(struct netxen_adapter *adapter)
{
{
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ADDRESS, addr);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 3);
- udelay(100); /* prevent bursting on CRB */
+ udelay(70); /* prevent bursting on CRB */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0xb);
if (netxen_wait_rom_done(adapter)) {
}
/* reset abyte_cnt and dummy_byte_cnt */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_ABYTE_CNT, 0);
- udelay(100); /* prevent bursting on CRB */
+ udelay(70); /* prevent bursting on CRB */
netxen_nic_reg_write(adapter, NETXEN_ROMUSB_ROM_DUMMY_BYTE_CNT, 0);
*valp = netxen_nic_reg_read(adapter, NETXEN_ROMUSB_ROM_RDATA);
return 0;
}
+static inline int
+do_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
+ u8 *bytes, size_t size)
+{
+ int addridx;
+ int ret = 0;
+
+ for (addridx = addr; addridx < (addr + size); addridx += 4) {
+ ret = do_rom_fast_read(adapter, addridx, (int *)bytes);
+ if (ret != 0)
+ break;
+ bytes += 4;
+ }
+
+ return ret;
+}
+
+int
+netxen_rom_fast_read_words(struct netxen_adapter *adapter, int addr,
+ u8 *bytes, size_t size)
+{
+ int ret;
+
+ ret = rom_lock(adapter);
+ if (ret < 0)
+ return ret;
+
+ ret = do_rom_fast_read_words(adapter, addr, bytes, size);
+
+ netxen_rom_unlock(adapter);
+ return ret;
+}
+
int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, int *valp)
{
int ret;
netxen_rom_unlock(adapter);
return ret;
}
+
+static inline int do_rom_fast_write_words(struct netxen_adapter *adapter,
+ int addr, u8 *bytes, size_t size)
+{
+ int addridx = addr;
+ int ret = 0;
+
+ while (addridx < (addr + size)) {
+ int last_attempt = 0;
+ int timeout = 0;
+ int data;
+
+ data = *(u32*)bytes;
+
+ ret = do_rom_fast_write(adapter, addridx, data);
+ if (ret < 0)
+ return ret;
+
+ while(1) {
+ int data1;
+
+ do_rom_fast_read(adapter, addridx, &data1);
+ if (data1 == data)
+ break;
+
+ if (timeout++ >= rom_write_timeout) {
+ if (last_attempt++ < 4) {
+ ret = do_rom_fast_write(adapter,
+ addridx, data);
+ if (ret < 0)
+ return ret;
+ }
+ else {
+ printk(KERN_INFO "Data write did not "
+ "succeed at address 0x%x\n", addridx);
+ break;
+ }
+ }
+ }
+
+ bytes += 4;
+ addridx += 4;
+ }
+
+ return ret;
+}
+
+int netxen_rom_fast_write_words(struct netxen_adapter *adapter, int addr,
+ u8 *bytes, size_t size)
+{
+ int ret = 0;
+
+ ret = rom_lock(adapter);
+ if (ret < 0)
+ return ret;
+
+ ret = do_rom_fast_write_words(adapter, addr, bytes, size);
+ netxen_rom_unlock(adapter);
+
+ return ret;
+}
+
+int netxen_rom_wrsr(struct netxen_adapter *adapter, int data)
+{
+ int ret;
+
+ ret = netxen_rom_wren(adapter);
+ if (ret < 0)
+ return ret;
+
+ netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_ROM_WDATA, data);
+ netxen_crb_writelit_adapter(adapter,
+ NETXEN_ROMUSB_ROM_INSTR_OPCODE, 0x1);
+
+ ret = netxen_wait_rom_done(adapter);
+ if (ret < 0)
+ return ret;
+
+ return netxen_rom_wip_poll(adapter);
+}
+
+int netxen_rom_rdsr(struct netxen_adapter *adapter)
+{
+ int ret;
+
+ ret = rom_lock(adapter);
+ if (ret < 0)
+ return ret;
+
+ ret = netxen_do_rom_rdsr(adapter);
+ netxen_rom_unlock(adapter);
+ return ret;
+}
+
+int netxen_backup_crbinit(struct netxen_adapter *adapter)
+{
+ int ret = FLASH_SUCCESS;
+ int val;
+ char *buffer = kmalloc(FLASH_SECTOR_SIZE, GFP_KERNEL);
+
+ if (!buffer)
+ return -ENOMEM;
+ /* unlock sector 63 */
+ val = netxen_rom_rdsr(adapter);
+ val = val & 0xe3;
+ ret = netxen_rom_wrsr(adapter, val);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+
+ ret = netxen_rom_wip_poll(adapter);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+
+ /* copy sector 0 to sector 63 */
+ ret = netxen_rom_fast_read_words(adapter, CRBINIT_START,
+ buffer, FLASH_SECTOR_SIZE);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+
+ ret = netxen_rom_fast_write_words(adapter, FIXED_START,
+ buffer, FLASH_SECTOR_SIZE);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+
+ /* lock sector 63 */
+ val = netxen_rom_rdsr(adapter);
+ if (!(val & 0x8)) {
+ val |= (0x1 << 2);
+ /* lock sector 63 */
+ if (netxen_rom_wrsr(adapter, val) == 0) {
+ ret = netxen_rom_wip_poll(adapter);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+
+ /* lock SR writes */
+ ret = netxen_rom_wip_poll(adapter);
+ if (ret != FLASH_SUCCESS)
+ goto out_kfree;
+ }
+ }
+
+out_kfree:
+ kfree(buffer);
+ return ret;
+}
+
int netxen_do_rom_se(struct netxen_adapter *adapter, int addr)
{
netxen_rom_wren(adapter);
return netxen_rom_wip_poll(adapter);
}
+void check_erased_flash(struct netxen_adapter *adapter, int addr)
+{
+ int i;
+ int val;
+ int count = 0, erased_errors = 0;
+ int range;
+
+ range = (addr == USER_START) ? FIXED_START : addr + FLASH_SECTOR_SIZE;
+
+ for (i = addr; i < range; i += 4) {
+ netxen_rom_fast_read(adapter, i, &val);
+ if (val != 0xffffffff)
+ erased_errors++;
+ count++;
+ }
+
+ if (erased_errors)
+ printk(KERN_INFO "0x%x out of 0x%x words fail to be erased "
+ "for sector address: %x\n", erased_errors, count, addr);
+}
+
int netxen_rom_se(struct netxen_adapter *adapter, int addr)
{
int ret = 0;
}
ret = netxen_do_rom_se(adapter, addr);
netxen_rom_unlock(adapter);
+ msleep(30);
+ check_erased_flash(adapter, addr);
+
+ return ret;
+}
+
+int
+netxen_flash_erase_sections(struct netxen_adapter *adapter, int start, int end)
+{
+ int ret = FLASH_SUCCESS;
+ int i;
+
+ for (i = start; i < end; i++) {
+ ret = netxen_rom_se(adapter, i * FLASH_SECTOR_SIZE);
+ if (ret)
+ break;
+ ret = netxen_rom_wip_poll(adapter);
+ if (ret < 0)
+ return ret;
+ }
+
+ return ret;
+}
+
+int
+netxen_flash_erase_secondary(struct netxen_adapter *adapter)
+{
+ int ret = FLASH_SUCCESS;
+ int start, end;
+
+ start = SECONDARY_START / FLASH_SECTOR_SIZE;
+ end = USER_START / FLASH_SECTOR_SIZE;
+ ret = netxen_flash_erase_sections(adapter, start, end);
+
+ return ret;
+}
+
+int
+netxen_flash_erase_primary(struct netxen_adapter *adapter)
+{
+ int ret = FLASH_SUCCESS;
+ int start, end;
+
+ start = PRIMARY_START / FLASH_SECTOR_SIZE;
+ end = SECONDARY_START / FLASH_SECTOR_SIZE;
+ ret = netxen_flash_erase_sections(adapter, start, end);
+
+ return ret;
+}
+
+int netxen_flash_unlock(struct netxen_adapter *adapter)
+{
+ int ret = 0;
+
+ ret = netxen_rom_wrsr(adapter, 0);
+ if (ret < 0)
+ return ret;
+
+ ret = netxen_rom_wren(adapter);
+ if (ret < 0)
+ return ret;
+
return ret;
}
}
for (i = 0; i < n; i++) {
- off =
- netxen_decode_crb_addr((unsigned long)buf[i].addr) +
- NETXEN_PCI_CRBSPACE;
+ off = netxen_decode_crb_addr((unsigned long)buf[i].addr);
+ if (off == NETXEN_ADDR_ERROR) {
+ printk(KERN_ERR"CRB init value out of range %lx\n",
+ buf[i].addr);
+ continue;
+ }
+ off += NETXEN_PCI_CRBSPACE;
/* skipping cold reboot MAGIC */
if (off == NETXEN_CAM_RAM(0x1fc))
continue;
int loops = 0;
if (!pegtune_val) {
+ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE));
while (val != PHAN_INITIALIZE_COMPLETE && loops < 200000) {
udelay(100);
schedule();
+++ /dev/null
-/*
- *
- * Copyright (c) 1999-2000 Grant Erickson <grant@lcse.umn.edu>
- *
- * Module name: oaknet.c
- *
- * Description:
- * Driver for the National Semiconductor DP83902AV Ethernet controller
- * on-board the IBM PowerPC "Oak" evaluation board. Adapted from the
- * various other 8390 drivers written by Donald Becker and Paul Gortmaker.
- *
- * Additional inspiration from the "tcd8390.c" driver from TiVo, Inc.
- * and "enetLib.c" from IBM.
- *
- */
-
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/init.h>
-#include <linux/jiffies.h>
-
-#include <asm/board.h>
-#include <asm/io.h>
-
-#include "8390.h"
-
-
-/* Preprocessor Defines */
-
-#if !defined(TRUE) || TRUE != 1
-#define TRUE 1
-#endif
-
-#if !defined(FALSE) || FALSE != 0
-#define FALSE 0
-#endif
-
-#define OAKNET_START_PG 0x20 /* First page of TX buffer */
-#define OAKNET_STOP_PG 0x40 /* Last pagge +1 of RX ring */
-
-#define OAKNET_WAIT (2 * HZ / 100) /* 20 ms */
-
-/* Experimenting with some fixes for a broken driver... */
-
-#define OAKNET_DISINT
-#define OAKNET_HEADCHECK
-#define OAKNET_RWFIX
-
-
-/* Global Variables */
-
-static const char *name = "National DP83902AV";
-
-static struct net_device *oaknet_devs;
-
-
-/* Function Prototypes */
-
-static int oaknet_open(struct net_device *dev);
-static int oaknet_close(struct net_device *dev);
-
-static void oaknet_reset_8390(struct net_device *dev);
-static void oaknet_get_8390_hdr(struct net_device *dev,
- struct e8390_pkt_hdr *hdr, int ring_page);
-static void oaknet_block_input(struct net_device *dev, int count,
- struct sk_buff *skb, int ring_offset);
-static void oaknet_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page);
-
-static void oaknet_dma_error(struct net_device *dev, const char *name);
-
-
-/*
- * int oaknet_init()
- *
- * Description:
- * This routine performs all the necessary platform-specific initiali-
- * zation and set-up for the IBM "Oak" evaluation board's National
- * Semiconductor DP83902AV "ST-NIC" Ethernet controller.
- *
- * Input(s):
- * N/A
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * 0 if OK, otherwise system error number on error.
- *
- */
-static int __init oaknet_init(void)
-{
- register int i;
- int reg0, regd;
- int ret = -ENOMEM;
- struct net_device *dev;
-#if 0
- unsigned long ioaddr = OAKNET_IO_BASE;
-#else
- unsigned long ioaddr = ioremap(OAKNET_IO_BASE, OAKNET_IO_SIZE);
-#endif
- bd_t *bip = (bd_t *)__res;
-
- if (!ioaddr)
- return -ENOMEM;
-
- dev = alloc_ei_netdev();
- if (!dev)
- goto out_unmap;
-
- ret = -EBUSY;
- if (!request_region(OAKNET_IO_BASE, OAKNET_IO_SIZE, name))
- goto out_dev;
-
- /* Quick register check to see if the device is really there. */
-
- ret = -ENODEV;
- if ((reg0 = ei_ibp(ioaddr)) == 0xFF)
- goto out_region;
-
- /*
- * That worked. Now a more thorough check, using the multicast
- * address registers, that the device is definitely out there
- * and semi-functional.
- */
-
- ei_obp(E8390_NODMA + E8390_PAGE1 + E8390_STOP, ioaddr + E8390_CMD);
- regd = ei_ibp(ioaddr + 0x0D);
- ei_obp(0xFF, ioaddr + 0x0D);
- ei_obp(E8390_NODMA + E8390_PAGE0, ioaddr + E8390_CMD);
- ei_ibp(ioaddr + EN0_COUNTER0);
-
- /* It's no good. Fix things back up and leave. */
-
- ret = -ENODEV;
- if (ei_ibp(ioaddr + EN0_COUNTER0) != 0) {
- ei_obp(reg0, ioaddr);
- ei_obp(regd, ioaddr + 0x0D);
- goto out_region;
- }
-
- SET_MODULE_OWNER(dev);
-
- /*
- * This controller is on an embedded board, so the base address
- * and interrupt assignments are pre-assigned and unchageable.
- */
-
- dev->base_addr = ioaddr;
- dev->irq = OAKNET_INT;
-
- /*
- * Disable all chip interrupts for now and ACK all pending
- * interrupts.
- */
-
- ei_obp(0x0, ioaddr + EN0_IMR);
- ei_obp(0xFF, ioaddr + EN0_ISR);
-
- /* Attempt to get the interrupt line */
-
- ret = -EAGAIN;
- if (request_irq(dev->irq, ei_interrupt, 0, name, dev)) {
- printk("%s: unable to request interrupt %d.\n",
- name, dev->irq);
- goto out_region;
- }
-
- /* Tell the world about what and where we've found. */
-
- printk("%s: %s at", dev->name, name);
- for (i = 0; i < ETHER_ADDR_LEN; ++i) {
- dev->dev_addr[i] = bip->bi_enetaddr[i];
- printk("%c%.2x", (i ? ':' : ' '), dev->dev_addr[i]);
- }
- printk(", found at %#lx, using IRQ %d.\n", dev->base_addr, dev->irq);
-
- /* Set up some required driver fields and then we're done. */
-
- ei_status.name = name;
- ei_status.word16 = FALSE;
- ei_status.tx_start_page = OAKNET_START_PG;
- ei_status.rx_start_page = OAKNET_START_PG + TX_PAGES;
- ei_status.stop_page = OAKNET_STOP_PG;
-
- ei_status.reset_8390 = &oaknet_reset_8390;
- ei_status.block_input = &oaknet_block_input;
- ei_status.block_output = &oaknet_block_output;
- ei_status.get_8390_hdr = &oaknet_get_8390_hdr;
-
- dev->open = oaknet_open;
- dev->stop = oaknet_close;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- dev->poll_controller = ei_poll;
-#endif
-
- NS8390_init(dev, FALSE);
- ret = register_netdev(dev);
- if (ret)
- goto out_irq;
-
- oaknet_devs = dev;
- return 0;
-
-out_irq;
- free_irq(dev->irq, dev);
-out_region:
- release_region(OAKNET_IO_BASE, OAKNET_IO_SIZE);
-out_dev:
- free_netdev(dev);
-out_unmap:
- iounmap(ioaddr);
- return ret;
-}
-
-/*
- * static int oaknet_open()
- *
- * Description:
- * This routine is a modest wrapper around ei_open, the 8390-generic,
- * driver open routine. This just increments the module usage count
- * and passes along the status from ei_open.
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- *
- * Output(s):
- * *dev - Pointer to the device structure for this driver, potentially
- * modified by ei_open.
- *
- * Returns:
- * 0 if OK, otherwise < 0 on error.
- *
- */
-static int
-oaknet_open(struct net_device *dev)
-{
- int status = ei_open(dev);
- return (status);
-}
-
-/*
- * static int oaknet_close()
- *
- * Description:
- * This routine is a modest wrapper around ei_close, the 8390-generic,
- * driver close routine. This just decrements the module usage count
- * and passes along the status from ei_close.
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- *
- * Output(s):
- * *dev - Pointer to the device structure for this driver, potentially
- * modified by ei_close.
- *
- * Returns:
- * 0 if OK, otherwise < 0 on error.
- *
- */
-static int
-oaknet_close(struct net_device *dev)
-{
- int status = ei_close(dev);
- return (status);
-}
-
-/*
- * static void oaknet_reset_8390()
- *
- * Description:
- * This routine resets the DP83902 chip.
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * N/A
- *
- */
-static void
-oaknet_reset_8390(struct net_device *dev)
-{
- int base = E8390_BASE;
-
- /*
- * We have no provision of reseting the controller as is done
- * in other drivers, such as "ne.c". However, the following
- * seems to work well enough in the TiVo driver.
- */
-
- printk("Resetting %s...\n", dev->name);
- ei_obp(E8390_STOP | E8390_NODMA | E8390_PAGE0, base + E8390_CMD);
- ei_status.txing = 0;
- ei_status.dmaing = 0;
-}
-
-/*
- * static void oaknet_get_8390_hdr()
- *
- * Description:
- * This routine grabs the 8390-specific header. It's similar to the
- * block input routine, but we don't need to be concerned with ring wrap
- * as the header will be at the start of a page, so we optimize accordingly.
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- * *hdr - Pointer to storage for the 8390-specific packet header.
- * ring_page - ?
- *
- * Output(s):
- * *hdr - Pointer to the 8390-specific packet header for the just-
- * received frame.
- *
- * Returns:
- * N/A
- *
- */
-static void
-oaknet_get_8390_hdr(struct net_device *dev, struct e8390_pkt_hdr *hdr,
- int ring_page)
-{
- int base = dev->base_addr;
-
- /*
- * This should NOT happen. If it does, it is the LAST thing you'll
- * see.
- */
-
- if (ei_status.dmaing) {
- oaknet_dma_error(dev, "oaknet_get_8390_hdr");
- return;
- }
-
- ei_status.dmaing |= 0x01;
- outb_p(E8390_NODMA + E8390_PAGE0 + E8390_START, base + OAKNET_CMD);
- outb_p(sizeof(struct e8390_pkt_hdr), base + EN0_RCNTLO);
- outb_p(0, base + EN0_RCNTHI);
- outb_p(0, base + EN0_RSARLO); /* On page boundary */
- outb_p(ring_page, base + EN0_RSARHI);
- outb_p(E8390_RREAD + E8390_START, base + OAKNET_CMD);
-
- if (ei_status.word16)
- insw(base + OAKNET_DATA, hdr,
- sizeof(struct e8390_pkt_hdr) >> 1);
- else
- insb(base + OAKNET_DATA, hdr,
- sizeof(struct e8390_pkt_hdr));
-
- /* Byte-swap the packet byte count */
-
- hdr->count = le16_to_cpu(hdr->count);
-
- outb_p(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */
- ei_status.dmaing &= ~0x01;
-}
-
-/*
- * XXX - Document me.
- */
-static void
-oaknet_block_input(struct net_device *dev, int count, struct sk_buff *skb,
- int ring_offset)
-{
- int base = OAKNET_BASE;
- char *buf = skb->data;
-
- /*
- * This should NOT happen. If it does, it is the LAST thing you'll
- * see.
- */
-
- if (ei_status.dmaing) {
- oaknet_dma_error(dev, "oaknet_block_input");
- return;
- }
-
-#ifdef OAKNET_DISINT
- save_flags(flags);
- cli();
-#endif
-
- ei_status.dmaing |= 0x01;
- ei_obp(E8390_NODMA + E8390_PAGE0 + E8390_START, base + E8390_CMD);
- ei_obp(count & 0xff, base + EN0_RCNTLO);
- ei_obp(count >> 8, base + EN0_RCNTHI);
- ei_obp(ring_offset & 0xff, base + EN0_RSARLO);
- ei_obp(ring_offset >> 8, base + EN0_RSARHI);
- ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
- if (ei_status.word16) {
- ei_isw(base + E8390_DATA, buf, count >> 1);
- if (count & 0x01) {
- buf[count - 1] = ei_ib(base + E8390_DATA);
-#ifdef OAKNET_HEADCHECK
- bytes++;
-#endif
- }
- } else {
- ei_isb(base + E8390_DATA, buf, count);
- }
-#ifdef OAKNET_HEADCHECK
- /*
- * This was for the ALPHA version only, but enough people have
- * been encountering problems so it is still here. If you see
- * this message you either 1) have a slightly incompatible clone
- * or 2) have noise/speed problems with your bus.
- */
-
- /* DMA termination address check... */
- {
- int addr, tries = 20;
- do {
- /* DON'T check for 'ei_ibp(EN0_ISR) & ENISR_RDC' here
- -- it's broken for Rx on some cards! */
- int high = ei_ibp(base + EN0_RSARHI);
- int low = ei_ibp(base + EN0_RSARLO);
- addr = (high << 8) + low;
- if (((ring_offset + bytes) & 0xff) == low)
- break;
- } while (--tries > 0);
- if (tries <= 0)
- printk("%s: RX transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, ring_offset + bytes, addr);
- }
-#endif
- ei_obp(ENISR_RDC, base + EN0_ISR); /* ACK Remote DMA interrupt */
- ei_status.dmaing &= ~0x01;
-
-#ifdef OAKNET_DISINT
- restore_flags(flags);
-#endif
-}
-
-/*
- * static void oaknet_block_output()
- *
- * Description:
- * This routine...
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- * count - Number of bytes to be transferred.
- * *buf -
- * start_page -
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * N/A
- *
- */
-static void
-oaknet_block_output(struct net_device *dev, int count,
- const unsigned char *buf, int start_page)
-{
- int base = E8390_BASE;
-#if 0
- int bug;
-#endif
- unsigned long start;
-#ifdef OAKNET_DISINT
- unsigned long flags;
-#endif
-#ifdef OAKNET_HEADCHECK
- int retries = 0;
-#endif
-
- /* Round the count up for word writes. */
-
- if (ei_status.word16 && (count & 0x1))
- count++;
-
- /*
- * This should NOT happen. If it does, it is the LAST thing you'll
- * see.
- */
-
- if (ei_status.dmaing) {
- oaknet_dma_error(dev, "oaknet_block_output");
- return;
- }
-
-#ifdef OAKNET_DISINT
- save_flags(flags);
- cli();
-#endif
-
- ei_status.dmaing |= 0x01;
-
- /* Make sure we are in page 0. */
-
- ei_obp(E8390_PAGE0 + E8390_START + E8390_NODMA, base + E8390_CMD);
-
-#ifdef OAKNET_HEADCHECK
-retry:
-#endif
-
-#if 0
- /*
- * The 83902 documentation states that the processor needs to
- * do a "dummy read" before doing the remote write to work
- * around a chip bug they don't feel like fixing.
- */
-
- bug = 0;
- while (1) {
- unsigned int rdhi;
- unsigned int rdlo;
-
- /* Now the normal output. */
- ei_obp(ENISR_RDC, base + EN0_ISR);
- ei_obp(count & 0xff, base + EN0_RCNTLO);
- ei_obp(count >> 8, base + EN0_RCNTHI);
- ei_obp(0x00, base + EN0_RSARLO);
- ei_obp(start_page, base + EN0_RSARHI);
-
- if (bug++)
- break;
-
- /* Perform the dummy read */
- rdhi = ei_ibp(base + EN0_CRDAHI);
- rdlo = ei_ibp(base + EN0_CRDALO);
- ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
-
- while (1) {
- unsigned int nrdhi;
- unsigned int nrdlo;
- nrdhi = ei_ibp(base + EN0_CRDAHI);
- nrdlo = ei_ibp(base + EN0_CRDALO);
- if ((rdhi != nrdhi) || (rdlo != nrdlo))
- break;
- }
- }
-#else
-#ifdef OAKNET_RWFIX
- /*
- * Handle the read-before-write bug the same way as the
- * Crynwr packet driver -- the Nat'l Semi. method doesn't work.
- * Actually this doesn't always work either, but if you have
- * problems with your 83902 this is better than nothing!
- */
-
- ei_obp(0x42, base + EN0_RCNTLO);
- ei_obp(0x00, base + EN0_RCNTHI);
- ei_obp(0x42, base + EN0_RSARLO);
- ei_obp(0x00, base + EN0_RSARHI);
- ei_obp(E8390_RREAD + E8390_START, base + E8390_CMD);
- /* Make certain that the dummy read has occurred. */
- udelay(6);
-#endif
-
- ei_obp(ENISR_RDC, base + EN0_ISR);
-
- /* Now the normal output. */
- ei_obp(count & 0xff, base + EN0_RCNTLO);
- ei_obp(count >> 8, base + EN0_RCNTHI);
- ei_obp(0x00, base + EN0_RSARLO);
- ei_obp(start_page, base + EN0_RSARHI);
-#endif /* 0/1 */
-
- ei_obp(E8390_RWRITE + E8390_START, base + E8390_CMD);
- if (ei_status.word16) {
- ei_osw(E8390_BASE + E8390_DATA, buf, count >> 1);
- } else {
- ei_osb(E8390_BASE + E8390_DATA, buf, count);
- }
-
-#ifdef OAKNET_DISINT
- restore_flags(flags);
-#endif
-
- start = jiffies;
-
-#ifdef OAKNET_HEADCHECK
- /*
- * This was for the ALPHA version only, but enough people have
- * been encountering problems so it is still here.
- */
-
- {
- /* DMA termination address check... */
- int addr, tries = 20;
- do {
- int high = ei_ibp(base + EN0_RSARHI);
- int low = ei_ibp(base + EN0_RSARLO);
- addr = (high << 8) + low;
- if ((start_page << 8) + count == addr)
- break;
- } while (--tries > 0);
-
- if (tries <= 0) {
- printk("%s: Tx packet transfer address mismatch,"
- "%#4.4x (expected) vs. %#4.4x (actual).\n",
- dev->name, (start_page << 8) + count, addr);
- if (retries++ == 0)
- goto retry;
- }
- }
-#endif
-
- while ((ei_ibp(base + EN0_ISR) & ENISR_RDC) == 0) {
- if (time_after(jiffies, start + OAKNET_WAIT)) {
- printk("%s: timeout waiting for Tx RDC.\n", dev->name);
- oaknet_reset_8390(dev);
- NS8390_init(dev, TRUE);
- break;
- }
- }
-
- ei_obp(ENISR_RDC, base + EN0_ISR); /* Ack intr. */
- ei_status.dmaing &= ~0x01;
-}
-
-/*
- * static void oaknet_dma_error()
- *
- * Description:
- * This routine prints out a last-ditch informative message to the console
- * indicating that a DMA error occurred. If you see this, it's the last
- * thing you'll see.
- *
- * Input(s):
- * *dev - Pointer to the device structure for this driver.
- * *name - Informative text (e.g. function name) indicating where the
- * DMA error occurred.
- *
- * Output(s):
- * N/A
- *
- * Returns:
- * N/A
- *
- */
-static void
-oaknet_dma_error(struct net_device *dev, const char *name)
-{
- printk(KERN_EMERG "%s: DMAing conflict in %s."
- "[DMAstat:%d][irqlock:%d][intr:%ld]\n",
- dev->name, name, ei_status.dmaing, ei_status.irqlock,
- dev->interrupt);
-}
-
-/*
- * Oak Ethernet module unload interface.
- */
-static void __exit oaknet_cleanup_module (void)
-{
- /* Convert to loop once driver supports multiple devices. */
- unregister_netdev(oaknet_dev);
- free_irq(oaknet_devs->irq, oaknet_devs);
- release_region(oaknet_devs->base_addr, OAKNET_IO_SIZE);
- iounmap(ioaddr);
- free_netdev(oaknet_devs);
-}
-
-module_init(oaknet_init);
-module_exit(oaknet_cleanup_module);
-MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Copyright (C) 2006-2007 PA Semi, Inc
+ *
+ * Driver for the PA Semi PWRficient onchip 1G/10G Ethernet MACs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <linux/dmaengine.h>
+#include <linux/delay.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <asm/dma-mapping.h>
+#include <linux/in.h>
+#include <linux/skbuff.h>
+
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <net/checksum.h>
+
+#include "pasemi_mac.h"
+
+
+/* TODO list
+ *
+ * - Get rid of pci_{read,write}_config(), map registers with ioremap
+ * for performance
+ * - PHY support
+ * - Multicast support
+ * - Large MTU support
+ * - Other performance improvements
+ */
+
+
+/* Must be a power of two */
+#define RX_RING_SIZE 512
+#define TX_RING_SIZE 512
+
+#define TX_DESC(mac, num) ((mac)->tx->desc[(num) & (TX_RING_SIZE-1)])
+#define TX_DESC_INFO(mac, num) ((mac)->tx->desc_info[(num) & (TX_RING_SIZE-1)])
+#define RX_DESC(mac, num) ((mac)->rx->desc[(num) & (RX_RING_SIZE-1)])
+#define RX_DESC_INFO(mac, num) ((mac)->rx->desc_info[(num) & (RX_RING_SIZE-1)])
+#define RX_BUFF(mac, num) ((mac)->rx->buffers[(num) & (RX_RING_SIZE-1)])
+
+#define BUF_SIZE 1646 /* 1500 MTU + ETH_HLEN + VLAN_HLEN + 2 64B cachelines */
+
+/* XXXOJN these should come out of the device tree some day */
+#define PAS_DMA_CAP_BASE 0xe00d0040
+#define PAS_DMA_CAP_SIZE 0x100
+#define PAS_DMA_COM_BASE 0xe00d0100
+#define PAS_DMA_COM_SIZE 0x100
+
+static struct pasdma_status *dma_status;
+
+static int pasemi_get_mac_addr(struct pasemi_mac *mac)
+{
+ struct pci_dev *pdev = mac->pdev;
+ struct device_node *dn = pci_device_to_OF_node(pdev);
+ const u8 *maddr;
+ u8 addr[6];
+
+ if (!dn) {
+ dev_dbg(&pdev->dev,
+ "No device node for mac, not configuring\n");
+ return -ENOENT;
+ }
+
+ maddr = get_property(dn, "mac-address", NULL);
+ if (maddr == NULL) {
+ dev_warn(&pdev->dev,
+ "no mac address in device tree, not configuring\n");
+ return -ENOENT;
+ }
+
+ if (sscanf(maddr, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &addr[0],
+ &addr[1], &addr[2], &addr[3], &addr[4], &addr[5]) != 6) {
+ dev_warn(&pdev->dev,
+ "can't parse mac address, not configuring\n");
+ return -EINVAL;
+ }
+
+ memcpy(mac->mac_addr, addr, sizeof(addr));
+ return 0;
+}
+
+static int pasemi_mac_setup_rx_resources(struct net_device *dev)
+{
+ struct pasemi_mac_rxring *ring;
+ struct pasemi_mac *mac = netdev_priv(dev);
+ int chan_id = mac->dma_rxch;
+
+ ring = kzalloc(sizeof(*ring), GFP_KERNEL);
+
+ if (!ring)
+ goto out_ring;
+
+ spin_lock_init(&ring->lock);
+
+ ring->desc_info = kzalloc(sizeof(struct pasemi_mac_buffer) *
+ RX_RING_SIZE, GFP_KERNEL);
+
+ if (!ring->desc_info)
+ goto out_desc_info;
+
+ /* Allocate descriptors */
+ ring->desc = dma_alloc_coherent(&mac->dma_pdev->dev,
+ RX_RING_SIZE *
+ sizeof(struct pas_dma_xct_descr),
+ &ring->dma, GFP_KERNEL);
+
+ if (!ring->desc)
+ goto out_desc;
+
+ memset(ring->desc, 0, RX_RING_SIZE * sizeof(struct pas_dma_xct_descr));
+
+ ring->buffers = dma_alloc_coherent(&mac->dma_pdev->dev,
+ RX_RING_SIZE * sizeof(u64),
+ &ring->buf_dma, GFP_KERNEL);
+ if (!ring->buffers)
+ goto out_buffers;
+
+ memset(ring->buffers, 0, RX_RING_SIZE * sizeof(u64));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXCHAN_BASEL(chan_id),
+ PAS_DMA_RXCHAN_BASEL_BRBL(ring->dma));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXCHAN_BASEU(chan_id),
+ PAS_DMA_RXCHAN_BASEU_BRBH(ring->dma >> 32) |
+ PAS_DMA_RXCHAN_BASEU_SIZ(RX_RING_SIZE >> 2));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXCHAN_CFG(chan_id),
+ PAS_DMA_RXCHAN_CFG_HBU(1));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXINT_BASEL(mac->dma_if),
+ PAS_DMA_RXINT_BASEL_BRBL(__pa(ring->buffers)));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_RXINT_BASEU(mac->dma_if),
+ PAS_DMA_RXINT_BASEU_BRBH(__pa(ring->buffers) >> 32) |
+ PAS_DMA_RXINT_BASEU_SIZ(RX_RING_SIZE >> 3));
+
+ ring->next_to_fill = 0;
+ ring->next_to_clean = 0;
+
+ snprintf(ring->irq_name, sizeof(ring->irq_name),
+ "%s rx", dev->name);
+ mac->rx = ring;
+
+ return 0;
+
+out_buffers:
+ dma_free_coherent(&mac->dma_pdev->dev,
+ RX_RING_SIZE * sizeof(struct pas_dma_xct_descr),
+ mac->rx->desc, mac->rx->dma);
+out_desc:
+ kfree(ring->desc_info);
+out_desc_info:
+ kfree(ring);
+out_ring:
+ return -ENOMEM;
+}
+
+
+static int pasemi_mac_setup_tx_resources(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ u32 val;
+ int chan_id = mac->dma_txch;
+ struct pasemi_mac_txring *ring;
+
+ ring = kzalloc(sizeof(*ring), GFP_KERNEL);
+ if (!ring)
+ goto out_ring;
+
+ spin_lock_init(&ring->lock);
+
+ ring->desc_info = kzalloc(sizeof(struct pasemi_mac_buffer) *
+ TX_RING_SIZE, GFP_KERNEL);
+ if (!ring->desc_info)
+ goto out_desc_info;
+
+ /* Allocate descriptors */
+ ring->desc = dma_alloc_coherent(&mac->dma_pdev->dev,
+ TX_RING_SIZE *
+ sizeof(struct pas_dma_xct_descr),
+ &ring->dma, GFP_KERNEL);
+ if (!ring->desc)
+ goto out_desc;
+
+ memset(ring->desc, 0, TX_RING_SIZE * sizeof(struct pas_dma_xct_descr));
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_TXCHAN_BASEL(chan_id),
+ PAS_DMA_TXCHAN_BASEL_BRBL(ring->dma));
+ val = PAS_DMA_TXCHAN_BASEU_BRBH(ring->dma >> 32);
+ val |= PAS_DMA_TXCHAN_BASEU_SIZ(TX_RING_SIZE >> 2);
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_TXCHAN_BASEU(chan_id), val);
+
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_TXCHAN_CFG(chan_id),
+ PAS_DMA_TXCHAN_CFG_TY_IFACE |
+ PAS_DMA_TXCHAN_CFG_TATTR(mac->dma_if) |
+ PAS_DMA_TXCHAN_CFG_UP |
+ PAS_DMA_TXCHAN_CFG_WT(2));
+
+ ring->next_to_use = 0;
+ ring->next_to_clean = 0;
+
+ snprintf(ring->irq_name, sizeof(ring->irq_name),
+ "%s tx", dev->name);
+ mac->tx = ring;
+
+ return 0;
+
+out_desc:
+ kfree(ring->desc_info);
+out_desc_info:
+ kfree(ring);
+out_ring:
+ return -ENOMEM;
+}
+
+static void pasemi_mac_free_tx_resources(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int i;
+ struct pasemi_mac_buffer *info;
+ struct pas_dma_xct_descr *dp;
+
+ for (i = 0; i < TX_RING_SIZE; i++) {
+ info = &TX_DESC_INFO(mac, i);
+ dp = &TX_DESC(mac, i);
+ if (info->dma) {
+ if (info->skb) {
+ pci_unmap_single(mac->dma_pdev,
+ info->dma,
+ info->skb->len,
+ PCI_DMA_TODEVICE);
+ dev_kfree_skb_any(info->skb);
+ }
+ info->dma = 0;
+ info->skb = NULL;
+ dp->mactx = 0;
+ dp->ptr = 0;
+ }
+ }
+
+ dma_free_coherent(&mac->dma_pdev->dev,
+ TX_RING_SIZE * sizeof(struct pas_dma_xct_descr),
+ mac->tx->desc, mac->tx->dma);
+
+ kfree(mac->tx->desc_info);
+ kfree(mac->tx);
+ mac->tx = NULL;
+}
+
+static void pasemi_mac_free_rx_resources(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int i;
+ struct pasemi_mac_buffer *info;
+ struct pas_dma_xct_descr *dp;
+
+ for (i = 0; i < RX_RING_SIZE; i++) {
+ info = &RX_DESC_INFO(mac, i);
+ dp = &RX_DESC(mac, i);
+ if (info->dma) {
+ if (info->skb) {
+ pci_unmap_single(mac->dma_pdev,
+ info->dma,
+ info->skb->len,
+ PCI_DMA_FROMDEVICE);
+ dev_kfree_skb_any(info->skb);
+ }
+ info->dma = 0;
+ info->skb = NULL;
+ dp->macrx = 0;
+ dp->ptr = 0;
+ }
+ }
+
+ dma_free_coherent(&mac->dma_pdev->dev,
+ RX_RING_SIZE * sizeof(struct pas_dma_xct_descr),
+ mac->rx->desc, mac->rx->dma);
+
+ dma_free_coherent(&mac->dma_pdev->dev, RX_RING_SIZE * sizeof(u64),
+ mac->rx->buffers, mac->rx->buf_dma);
+
+ kfree(mac->rx->desc_info);
+ kfree(mac->rx);
+ mac->rx = NULL;
+}
+
+static void pasemi_mac_replenish_rx_ring(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int i;
+ int start = mac->rx->next_to_fill;
+ unsigned int count;
+
+ count = (mac->rx->next_to_clean + RX_RING_SIZE -
+ mac->rx->next_to_fill) & (RX_RING_SIZE - 1);
+
+ /* Check to see if we're doing first-time setup */
+ if (unlikely(mac->rx->next_to_clean == 0 && mac->rx->next_to_fill == 0))
+ count = RX_RING_SIZE;
+
+ if (count <= 0)
+ return;
+
+ for (i = start; i < start + count; i++) {
+ struct pasemi_mac_buffer *info = &RX_DESC_INFO(mac, i);
+ u64 *buff = &RX_BUFF(mac, i);
+ struct sk_buff *skb;
+ dma_addr_t dma;
+
+ skb = dev_alloc_skb(BUF_SIZE);
+
+ if (!skb) {
+ count = i - start;
+ break;
+ }
+
+ skb->dev = dev;
+
+ dma = pci_map_single(mac->dma_pdev, skb->data, skb->len,
+ PCI_DMA_FROMDEVICE);
+
+ if (dma_mapping_error(dma)) {
+ dev_kfree_skb_irq(info->skb);
+ count = i - start;
+ break;
+ }
+
+ info->skb = skb;
+ info->dma = dma;
+ *buff = XCT_RXB_LEN(BUF_SIZE) | XCT_RXB_ADDR(dma);
+ }
+
+ wmb();
+
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXCHAN_INCR(mac->dma_rxch),
+ count);
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXINT_INCR(mac->dma_if),
+ count);
+
+ mac->rx->next_to_fill += count;
+}
+
+static int pasemi_mac_clean_rx(struct pasemi_mac *mac, int limit)
+{
+ unsigned int i;
+ int start, count;
+
+ spin_lock(&mac->rx->lock);
+
+ start = mac->rx->next_to_clean;
+ count = 0;
+
+ for (i = start; i < (start + RX_RING_SIZE) && count < limit; i++) {
+ struct pas_dma_xct_descr *dp;
+ struct pasemi_mac_buffer *info;
+ struct sk_buff *skb;
+ unsigned int j, len;
+ dma_addr_t dma;
+
+ rmb();
+
+ dp = &RX_DESC(mac, i);
+
+ if (!(dp->macrx & XCT_MACRX_O))
+ break;
+
+ count++;
+
+ info = NULL;
+
+ /* We have to scan for our skb since there's no way
+ * to back-map them from the descriptor, and if we
+ * have several receive channels then they might not
+ * show up in the same order as they were put on the
+ * interface ring.
+ */
+
+ dma = (dp->ptr & XCT_PTR_ADDR_M);
+ for (j = start; j < (start + RX_RING_SIZE); j++) {
+ info = &RX_DESC_INFO(mac, j);
+ if (info->dma == dma)
+ break;
+ }
+
+ BUG_ON(!info);
+ BUG_ON(info->dma != dma);
+
+ pci_unmap_single(mac->dma_pdev, info->dma, info->skb->len,
+ PCI_DMA_FROMDEVICE);
+
+ skb = info->skb;
+
+ len = (dp->macrx & XCT_MACRX_LLEN_M) >> XCT_MACRX_LLEN_S;
+
+ skb_put(skb, len);
+
+ skb->protocol = eth_type_trans(skb, mac->netdev);
+
+ if ((dp->macrx & XCT_MACRX_HTY_M) == XCT_MACRX_HTY_IPV4_OK) {
+ skb->ip_summed = CHECKSUM_COMPLETE;
+ skb->csum = (dp->macrx & XCT_MACRX_CSUM_M) >>
+ XCT_MACRX_CSUM_S;
+ } else
+ skb->ip_summed = CHECKSUM_NONE;
+
+ mac->stats.rx_bytes += len;
+ mac->stats.rx_packets++;
+
+ netif_receive_skb(skb);
+
+ info->dma = 0;
+ info->skb = NULL;
+ dp->ptr = 0;
+ dp->macrx = 0;
+ }
+
+ mac->rx->next_to_clean += count;
+ pasemi_mac_replenish_rx_ring(mac->netdev);
+
+ spin_unlock(&mac->rx->lock);
+
+ return count;
+}
+
+static int pasemi_mac_clean_tx(struct pasemi_mac *mac)
+{
+ int i;
+ struct pasemi_mac_buffer *info;
+ struct pas_dma_xct_descr *dp;
+ int start, count;
+ int flags;
+
+ spin_lock_irqsave(&mac->tx->lock, flags);
+
+ start = mac->tx->next_to_clean;
+ count = 0;
+
+ for (i = start; i < mac->tx->next_to_use; i++) {
+ dp = &TX_DESC(mac, i);
+ if (!dp || (dp->mactx & XCT_MACTX_O))
+ break;
+
+ count++;
+
+ info = &TX_DESC_INFO(mac, i);
+
+ pci_unmap_single(mac->dma_pdev, info->dma,
+ info->skb->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(info->skb);
+
+ info->skb = NULL;
+ info->dma = 0;
+ dp->mactx = 0;
+ dp->ptr = 0;
+ }
+ mac->tx->next_to_clean += count;
+ spin_unlock_irqrestore(&mac->tx->lock, flags);
+
+ return count;
+}
+
+
+static irqreturn_t pasemi_mac_rx_intr(int irq, void *data)
+{
+ struct net_device *dev = data;
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int reg;
+
+ if (!(*mac->rx_status & PAS_STATUS_INT))
+ return IRQ_NONE;
+
+ netif_rx_schedule(dev);
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(0));
+
+ reg = PAS_IOB_DMA_RXCH_RESET_PINTC | PAS_IOB_DMA_RXCH_RESET_SINTC |
+ PAS_IOB_DMA_RXCH_RESET_DINTC;
+ if (*mac->rx_status & PAS_STATUS_TIMER)
+ reg |= PAS_IOB_DMA_RXCH_RESET_TINTC;
+
+ pci_write_config_dword(mac->iob_pdev,
+ PAS_IOB_DMA_RXCH_RESET(mac->dma_rxch), reg);
+
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t pasemi_mac_tx_intr(int irq, void *data)
+{
+ struct net_device *dev = data;
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int reg;
+ int was_full;
+
+ was_full = mac->tx->next_to_clean - mac->tx->next_to_use == TX_RING_SIZE;
+
+ if (!(*mac->tx_status & PAS_STATUS_INT))
+ return IRQ_NONE;
+
+ pasemi_mac_clean_tx(mac);
+
+ reg = PAS_IOB_DMA_TXCH_RESET_PINTC | PAS_IOB_DMA_TXCH_RESET_SINTC;
+ if (*mac->tx_status & PAS_STATUS_TIMER)
+ reg |= PAS_IOB_DMA_TXCH_RESET_TINTC;
+
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_TXCH_RESET(mac->dma_txch),
+ reg);
+
+ if (was_full)
+ netif_wake_queue(dev);
+
+ return IRQ_HANDLED;
+}
+
+static int pasemi_mac_open(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int flags;
+ int ret;
+
+ /* enable rx section */
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_COM_RXCMD,
+ PAS_DMA_COM_RXCMD_EN);
+
+ /* enable tx section */
+ pci_write_config_dword(mac->dma_pdev, PAS_DMA_COM_TXCMD,
+ PAS_DMA_COM_TXCMD_EN);
+
+ flags = PAS_MAC_CFG_TXP_FCE | PAS_MAC_CFG_TXP_FPC(3) |
+ PAS_MAC_CFG_TXP_SL(3) | PAS_MAC_CFG_TXP_COB(0xf) |
+ PAS_MAC_CFG_TXP_TIFT(8) | PAS_MAC_CFG_TXP_TIFG(12);
+
+ pci_write_config_dword(mac->pdev, PAS_MAC_CFG_TXP, flags);
+
+ flags = PAS_MAC_CFG_PCFG_S1 | PAS_MAC_CFG_PCFG_PE |
+ PAS_MAC_CFG_PCFG_PR | PAS_MAC_CFG_PCFG_CE;
+
+ flags |= PAS_MAC_CFG_PCFG_TSR_1G | PAS_MAC_CFG_PCFG_SPD_1G;
+
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_RXCH_CFG(mac->dma_rxch),
+ PAS_IOB_DMA_RXCH_CFG_CNTTH(30));
+
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000));
+
+ pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, flags);
+
+ ret = pasemi_mac_setup_rx_resources(dev);
+ if (ret)
+ goto out_rx_resources;
+
+ ret = pasemi_mac_setup_tx_resources(dev);
+ if (ret)
+ goto out_tx_resources;
+
+ pci_write_config_dword(mac->pdev, PAS_MAC_IPC_CHNL,
+ PAS_MAC_IPC_CHNL_DCHNO(mac->dma_rxch) |
+ PAS_MAC_IPC_CHNL_BCH(mac->dma_rxch));
+
+ /* enable rx if */
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+ PAS_DMA_RXINT_RCMDSTA_EN);
+
+ /* enable rx channel */
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch),
+ PAS_DMA_RXCHAN_CCMDSTA_EN |
+ PAS_DMA_RXCHAN_CCMDSTA_DU);
+
+ /* enable tx channel */
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch),
+ PAS_DMA_TXCHAN_TCMDSTA_EN);
+
+ pasemi_mac_replenish_rx_ring(dev);
+
+ netif_start_queue(dev);
+ netif_poll_enable(dev);
+
+ ret = request_irq(mac->dma_pdev->irq + mac->dma_txch,
+ &pasemi_mac_tx_intr, IRQF_DISABLED,
+ mac->tx->irq_name, dev);
+ if (ret) {
+ dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
+ mac->dma_pdev->irq + mac->dma_txch, ret);
+ goto out_tx_int;
+ }
+
+ ret = request_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch,
+ &pasemi_mac_rx_intr, IRQF_DISABLED,
+ mac->rx->irq_name, dev);
+ if (ret) {
+ dev_err(&mac->pdev->dev, "request_irq of irq %d failed: %d\n",
+ mac->dma_pdev->irq + 20 + mac->dma_rxch, ret);
+ goto out_rx_int;
+ }
+
+ return 0;
+
+out_rx_int:
+ free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
+out_tx_int:
+ netif_poll_disable(dev);
+ netif_stop_queue(dev);
+ pasemi_mac_free_tx_resources(dev);
+out_tx_resources:
+ pasemi_mac_free_rx_resources(dev);
+out_rx_resources:
+
+ return ret;
+}
+
+#define MAX_RETRIES 5000
+
+static int pasemi_mac_close(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int stat;
+ int retries;
+
+ netif_stop_queue(dev);
+
+ /* Clean out any pending buffers */
+ pasemi_mac_clean_tx(mac);
+ pasemi_mac_clean_rx(mac, RX_RING_SIZE);
+
+ /* Disable interface */
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch),
+ PAS_DMA_TXCHAN_TCMDSTA_ST);
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+ PAS_DMA_RXINT_RCMDSTA_ST);
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch),
+ PAS_DMA_RXCHAN_CCMDSTA_ST);
+
+ for (retries = 0; retries < MAX_RETRIES; retries++) {
+ pci_read_config_dword(mac->dma_pdev,
+ PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch),
+ &stat);
+ if (stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)
+ break;
+ cond_resched();
+ }
+
+ if (!(stat & PAS_DMA_TXCHAN_TCMDSTA_ACT)) {
+ dev_err(&mac->dma_pdev->dev, "Failed to stop tx channel\n");
+ }
+
+ for (retries = 0; retries < MAX_RETRIES; retries++) {
+ pci_read_config_dword(mac->dma_pdev,
+ PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch),
+ &stat);
+ if (stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)
+ break;
+ cond_resched();
+ }
+
+ if (!(stat & PAS_DMA_RXCHAN_CCMDSTA_ACT)) {
+ dev_err(&mac->dma_pdev->dev, "Failed to stop rx channel\n");
+ }
+
+ for (retries = 0; retries < MAX_RETRIES; retries++) {
+ pci_read_config_dword(mac->dma_pdev,
+ PAS_DMA_RXINT_RCMDSTA(mac->dma_if),
+ &stat);
+ if (stat & PAS_DMA_RXINT_RCMDSTA_ACT)
+ break;
+ cond_resched();
+ }
+
+ if (!(stat & PAS_DMA_RXINT_RCMDSTA_ACT)) {
+ dev_err(&mac->dma_pdev->dev, "Failed to stop rx interface\n");
+ }
+
+ /* Then, disable the channel. This must be done separately from
+ * stopping, since you can't disable when active.
+ */
+
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_TXCHAN_TCMDSTA(mac->dma_txch), 0);
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXCHAN_CCMDSTA(mac->dma_rxch), 0);
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_RXINT_RCMDSTA(mac->dma_if), 0);
+
+ free_irq(mac->dma_pdev->irq + mac->dma_txch, dev);
+ free_irq(mac->dma_pdev->irq + 20 + mac->dma_rxch, dev);
+
+ /* Free resources */
+ pasemi_mac_free_rx_resources(dev);
+ pasemi_mac_free_tx_resources(dev);
+
+ return 0;
+}
+
+static int pasemi_mac_start_tx(struct sk_buff *skb, struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ struct pasemi_mac_txring *txring;
+ struct pasemi_mac_buffer *info;
+ struct pas_dma_xct_descr *dp;
+ u64 dflags;
+ dma_addr_t map;
+ int flags;
+
+ dflags = XCT_MACTX_O | XCT_MACTX_ST | XCT_MACTX_SS | XCT_MACTX_CRC_PAD;
+
+ if (skb->ip_summed == CHECKSUM_PARTIAL) {
+ switch (skb->nh.iph->protocol) {
+ case IPPROTO_TCP:
+ dflags |= XCT_MACTX_CSUM_TCP;
+ dflags |= XCT_MACTX_IPH((skb->h.raw - skb->nh.raw) >> 2);
+ dflags |= XCT_MACTX_IPO(skb->nh.raw - skb->data);
+ break;
+ case IPPROTO_UDP:
+ dflags |= XCT_MACTX_CSUM_UDP;
+ dflags |= XCT_MACTX_IPH((skb->h.raw - skb->nh.raw) >> 2);
+ dflags |= XCT_MACTX_IPO(skb->nh.raw - skb->data);
+ break;
+ }
+ }
+
+ map = pci_map_single(mac->dma_pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
+
+ if (dma_mapping_error(map))
+ return NETDEV_TX_BUSY;
+
+ txring = mac->tx;
+
+ spin_lock_irqsave(&txring->lock, flags);
+
+ if (txring->next_to_clean - txring->next_to_use == TX_RING_SIZE) {
+ spin_unlock_irqrestore(&txring->lock, flags);
+ pasemi_mac_clean_tx(mac);
+ spin_lock_irqsave(&txring->lock, flags);
+
+ if (txring->next_to_clean - txring->next_to_use ==
+ TX_RING_SIZE) {
+ /* Still no room -- stop the queue and wait for tx
+ * intr when there's room.
+ */
+ netif_stop_queue(dev);
+ goto out_err;
+ }
+ }
+
+
+ dp = &TX_DESC(mac, txring->next_to_use);
+ info = &TX_DESC_INFO(mac, txring->next_to_use);
+
+ dp->mactx = dflags | XCT_MACTX_LLEN(skb->len);
+ dp->ptr = XCT_PTR_LEN(skb->len) | XCT_PTR_ADDR(map);
+ info->dma = map;
+ info->skb = skb;
+
+ txring->next_to_use++;
+ mac->stats.tx_packets++;
+ mac->stats.tx_bytes += skb->len;
+
+ spin_unlock_irqrestore(&txring->lock, flags);
+
+ pci_write_config_dword(mac->dma_pdev,
+ PAS_DMA_TXCHAN_INCR(mac->dma_txch), 1);
+
+ return NETDEV_TX_OK;
+
+out_err:
+ spin_unlock_irqrestore(&txring->lock, flags);
+ pci_unmap_single(mac->dma_pdev, map, skb->len, PCI_DMA_TODEVICE);
+ return NETDEV_TX_BUSY;
+}
+
+static struct net_device_stats *pasemi_mac_get_stats(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+
+ return &mac->stats;
+}
+
+static void pasemi_mac_set_rx_mode(struct net_device *dev)
+{
+ struct pasemi_mac *mac = netdev_priv(dev);
+ unsigned int flags;
+
+ pci_read_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, &flags);
+
+ /* Set promiscuous */
+ if (dev->flags & IFF_PROMISC)
+ flags |= PAS_MAC_CFG_PCFG_PR;
+ else
+ flags &= ~PAS_MAC_CFG_PCFG_PR;
+
+ pci_write_config_dword(mac->pdev, PAS_MAC_CFG_PCFG, flags);
+}
+
+
+static int pasemi_mac_poll(struct net_device *dev, int *budget)
+{
+ int pkts, limit = min(*budget, dev->quota);
+ struct pasemi_mac *mac = netdev_priv(dev);
+
+ pkts = pasemi_mac_clean_rx(mac, limit);
+
+ if (pkts < limit) {
+ /* all done, no more packets present */
+ netif_rx_complete(dev);
+
+ /* re-enable receive interrupts */
+ pci_write_config_dword(mac->iob_pdev, PAS_IOB_DMA_COM_TIMEOUTCFG,
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(1000000));
+ return 0;
+ } else {
+ /* used up our quantum, so reschedule */
+ dev->quota -= pkts;
+ *budget -= pkts;
+ return 1;
+ }
+}
+
+static int __devinit
+pasemi_mac_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ static int index = 0;
+ struct net_device *dev;
+ struct pasemi_mac *mac;
+ int err;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ return err;
+
+ dev = alloc_etherdev(sizeof(struct pasemi_mac));
+ if (dev == NULL) {
+ dev_err(&pdev->dev,
+ "pasemi_mac: Could not allocate ethernet device.\n");
+ err = -ENOMEM;
+ goto out_disable_device;
+ }
+
+ SET_MODULE_OWNER(dev);
+ pci_set_drvdata(pdev, dev);
+ SET_NETDEV_DEV(dev, &pdev->dev);
+
+ mac = netdev_priv(dev);
+
+ mac->pdev = pdev;
+ mac->netdev = dev;
+ mac->dma_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa007, NULL);
+
+ if (!mac->dma_pdev) {
+ dev_err(&pdev->dev, "Can't find DMA Controller\n");
+ err = -ENODEV;
+ goto out_free_netdev;
+ }
+
+ mac->iob_pdev = pci_get_device(PCI_VENDOR_ID_PASEMI, 0xa001, NULL);
+
+ if (!mac->iob_pdev) {
+ dev_err(&pdev->dev, "Can't find I/O Bridge\n");
+ err = -ENODEV;
+ goto out_put_dma_pdev;
+ }
+
+ /* These should come out of the device tree eventually */
+ mac->dma_txch = index;
+ mac->dma_rxch = index;
+
+ /* We probe GMAC before XAUI, but the DMA interfaces are
+ * in XAUI, GMAC order.
+ */
+ if (index < 4)
+ mac->dma_if = index + 2;
+ else
+ mac->dma_if = index - 4;
+ index++;
+
+ switch (pdev->device) {
+ case 0xa005:
+ mac->type = MAC_TYPE_GMAC;
+ break;
+ case 0xa006:
+ mac->type = MAC_TYPE_XAUI;
+ break;
+ default:
+ err = -ENODEV;
+ goto out;
+ }
+
+ /* get mac addr from device tree */
+ if (pasemi_get_mac_addr(mac) || !is_valid_ether_addr(mac->mac_addr)) {
+ err = -ENODEV;
+ goto out;
+ }
+ memcpy(dev->dev_addr, mac->mac_addr, sizeof(mac->mac_addr));
+
+ dev->open = pasemi_mac_open;
+ dev->stop = pasemi_mac_close;
+ dev->hard_start_xmit = pasemi_mac_start_tx;
+ dev->get_stats = pasemi_mac_get_stats;
+ dev->set_multicast_list = pasemi_mac_set_rx_mode;
+ dev->weight = 64;
+ dev->poll = pasemi_mac_poll;
+ dev->features = NETIF_F_HW_CSUM;
+
+ /* The dma status structure is located in the I/O bridge, and
+ * is cache coherent.
+ */
+ if (!dma_status)
+ /* XXXOJN This should come from the device tree */
+ dma_status = __ioremap(0xfd800000, 0x1000, 0);
+
+ mac->rx_status = &dma_status->rx_sta[mac->dma_rxch];
+ mac->tx_status = &dma_status->tx_sta[mac->dma_txch];
+
+ err = register_netdev(dev);
+
+ if (err) {
+ dev_err(&mac->pdev->dev, "register_netdev failed with error %d\n",
+ err);
+ goto out;
+ } else
+ printk(KERN_INFO "%s: PA Semi %s: intf %d, txch %d, rxch %d, "
+ "hw addr %02x:%02x:%02x:%02x:%02x:%02x\n",
+ dev->name, mac->type == MAC_TYPE_GMAC ? "GMAC" : "XAUI",
+ mac->dma_if, mac->dma_txch, mac->dma_rxch,
+ dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
+ dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
+
+ return err;
+
+out:
+ pci_dev_put(mac->iob_pdev);
+out_put_dma_pdev:
+ pci_dev_put(mac->dma_pdev);
+out_free_netdev:
+ free_netdev(dev);
+out_disable_device:
+ pci_disable_device(pdev);
+ return err;
+
+}
+
+static void __devexit pasemi_mac_remove(struct pci_dev *pdev)
+{
+ struct net_device *netdev = pci_get_drvdata(pdev);
+ struct pasemi_mac *mac;
+
+ if (!netdev)
+ return;
+
+ mac = netdev_priv(netdev);
+
+ unregister_netdev(netdev);
+
+ pci_disable_device(pdev);
+ pci_dev_put(mac->dma_pdev);
+ pci_dev_put(mac->iob_pdev);
+
+ pci_set_drvdata(pdev, NULL);
+ free_netdev(netdev);
+}
+
+static struct pci_device_id pasemi_mac_pci_tbl[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa005) },
+ { PCI_DEVICE(PCI_VENDOR_ID_PASEMI, 0xa006) },
+};
+
+MODULE_DEVICE_TABLE(pci, pasemi_mac_pci_tbl);
+
+static struct pci_driver pasemi_mac_driver = {
+ .name = "pasemi_mac",
+ .id_table = pasemi_mac_pci_tbl,
+ .probe = pasemi_mac_probe,
+ .remove = __devexit_p(pasemi_mac_remove),
+};
+
+static void __exit pasemi_mac_cleanup_module(void)
+{
+ pci_unregister_driver(&pasemi_mac_driver);
+ __iounmap(dma_status);
+ dma_status = NULL;
+}
+
+int pasemi_mac_init_module(void)
+{
+ return pci_register_driver(&pasemi_mac_driver);
+}
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR ("Olof Johansson <olof@lixom.net>");
+MODULE_DESCRIPTION("PA Semi PWRficient Ethernet driver");
+
+module_init(pasemi_mac_init_module);
+module_exit(pasemi_mac_cleanup_module);
--- /dev/null
+/*
+ * Copyright (C) 2006 PA Semi, Inc
+ *
+ * Driver for the PA6T-1682M onchip 1G/10G Ethernet MACs, soft state and
+ * hardware register layouts.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef PASEMI_MAC_H
+#define PASEMI_MAC_H
+
+#include <linux/ethtool.h>
+#include <linux/netdevice.h>
+#include <linux/spinlock.h>
+
+struct pasemi_mac_txring {
+ spinlock_t lock;
+ struct pas_dma_xct_descr *desc;
+ dma_addr_t dma;
+ unsigned int size;
+ unsigned int next_to_use;
+ unsigned int next_to_clean;
+ struct pasemi_mac_buffer *desc_info;
+ char irq_name[10]; /* "eth%d tx" */
+};
+
+struct pasemi_mac_rxring {
+ spinlock_t lock;
+ struct pas_dma_xct_descr *desc; /* RX channel descriptor ring */
+ dma_addr_t dma;
+ u64 *buffers; /* RX interface buffer ring */
+ dma_addr_t buf_dma;
+ unsigned int size;
+ unsigned int next_to_fill;
+ unsigned int next_to_clean;
+ struct pasemi_mac_buffer *desc_info;
+ char irq_name[10]; /* "eth%d rx" */
+};
+
+struct pasemi_mac {
+ struct net_device *netdev;
+ struct pci_dev *pdev;
+ struct pci_dev *dma_pdev;
+ struct pci_dev *iob_pdev;
+ struct net_device_stats stats;
+
+ /* Pointer to the cacheable per-channel status registers */
+ u64 *rx_status;
+ u64 *tx_status;
+
+ u8 type;
+#define MAC_TYPE_GMAC 1
+#define MAC_TYPE_XAUI 2
+ u32 dma_txch;
+ u32 dma_if;
+ u32 dma_rxch;
+
+ u8 mac_addr[6];
+
+ struct timer_list rxtimer;
+
+ struct pasemi_mac_txring *tx;
+ struct pasemi_mac_rxring *rx;
+};
+
+/* Software status descriptor (desc_info) */
+struct pasemi_mac_buffer {
+ struct sk_buff *skb;
+ dma_addr_t dma;
+};
+
+
+/* status register layout in IOB region, at 0xfb800000 */
+struct pasdma_status {
+ u64 rx_sta[64];
+ u64 tx_sta[20];
+};
+
+/* descriptor structure */
+struct pas_dma_xct_descr {
+ union {
+ u64 mactx;
+ u64 macrx;
+ };
+ union {
+ u64 ptr;
+ u64 rxb;
+ };
+};
+
+/* MAC CFG register offsets */
+
+enum {
+ PAS_MAC_CFG_PCFG = 0x80,
+ PAS_MAC_CFG_TXP = 0x98,
+ PAS_MAC_IPC_CHNL = 0x208,
+};
+
+/* MAC CFG register fields */
+#define PAS_MAC_CFG_PCFG_PE 0x80000000
+#define PAS_MAC_CFG_PCFG_CE 0x40000000
+#define PAS_MAC_CFG_PCFG_BU 0x20000000
+#define PAS_MAC_CFG_PCFG_TT 0x10000000
+#define PAS_MAC_CFG_PCFG_TSR_M 0x0c000000
+#define PAS_MAC_CFG_PCFG_TSR_10M 0x00000000
+#define PAS_MAC_CFG_PCFG_TSR_100M 0x04000000
+#define PAS_MAC_CFG_PCFG_TSR_1G 0x08000000
+#define PAS_MAC_CFG_PCFG_TSR_10G 0x0c000000
+#define PAS_MAC_CFG_PCFG_T24 0x02000000
+#define PAS_MAC_CFG_PCFG_PR 0x01000000
+#define PAS_MAC_CFG_PCFG_CRO_M 0x00ff0000
+#define PAS_MAC_CFG_PCFG_CRO_S 16
+#define PAS_MAC_CFG_PCFG_IPO_M 0x0000ff00
+#define PAS_MAC_CFG_PCFG_IPO_S 8
+#define PAS_MAC_CFG_PCFG_S1 0x00000080
+#define PAS_MAC_CFG_PCFG_IO_M 0x00000060
+#define PAS_MAC_CFG_PCFG_IO_MAC 0x00000000
+#define PAS_MAC_CFG_PCFG_IO_OFF 0x00000020
+#define PAS_MAC_CFG_PCFG_IO_IND_ETH 0x00000040
+#define PAS_MAC_CFG_PCFG_IO_IND_IP 0x00000060
+#define PAS_MAC_CFG_PCFG_LP 0x00000010
+#define PAS_MAC_CFG_PCFG_TS 0x00000008
+#define PAS_MAC_CFG_PCFG_HD 0x00000004
+#define PAS_MAC_CFG_PCFG_SPD_M 0x00000003
+#define PAS_MAC_CFG_PCFG_SPD_10M 0x00000000
+#define PAS_MAC_CFG_PCFG_SPD_100M 0x00000001
+#define PAS_MAC_CFG_PCFG_SPD_1G 0x00000002
+#define PAS_MAC_CFG_PCFG_SPD_10G 0x00000003
+#define PAS_MAC_CFG_TXP_FCF 0x01000000
+#define PAS_MAC_CFG_TXP_FCE 0x00800000
+#define PAS_MAC_CFG_TXP_FC 0x00400000
+#define PAS_MAC_CFG_TXP_FPC_M 0x00300000
+#define PAS_MAC_CFG_TXP_FPC_S 20
+#define PAS_MAC_CFG_TXP_FPC(x) (((x) << PAS_MAC_CFG_TXP_FPC_S) & \
+ PAS_MAC_CFG_TXP_FPC_M)
+#define PAS_MAC_CFG_TXP_RT 0x00080000
+#define PAS_MAC_CFG_TXP_BL 0x00040000
+#define PAS_MAC_CFG_TXP_SL_M 0x00030000
+#define PAS_MAC_CFG_TXP_SL_S 16
+#define PAS_MAC_CFG_TXP_SL(x) (((x) << PAS_MAC_CFG_TXP_SL_S) & \
+ PAS_MAC_CFG_TXP_SL_M)
+#define PAS_MAC_CFG_TXP_COB_M 0x0000f000
+#define PAS_MAC_CFG_TXP_COB_S 12
+#define PAS_MAC_CFG_TXP_COB(x) (((x) << PAS_MAC_CFG_TXP_COB_S) & \
+ PAS_MAC_CFG_TXP_COB_M)
+#define PAS_MAC_CFG_TXP_TIFT_M 0x00000f00
+#define PAS_MAC_CFG_TXP_TIFT_S 8
+#define PAS_MAC_CFG_TXP_TIFT(x) (((x) << PAS_MAC_CFG_TXP_TIFT_S) & \
+ PAS_MAC_CFG_TXP_TIFT_M)
+#define PAS_MAC_CFG_TXP_TIFG_M 0x000000ff
+#define PAS_MAC_CFG_TXP_TIFG_S 0
+#define PAS_MAC_CFG_TXP_TIFG(x) (((x) << PAS_MAC_CFG_TXP_TIFG_S) & \
+ PAS_MAC_CFG_TXP_TIFG_M)
+
+#define PAS_MAC_IPC_CHNL_DCHNO_M 0x003f0000
+#define PAS_MAC_IPC_CHNL_DCHNO_S 16
+#define PAS_MAC_IPC_CHNL_DCHNO(x) (((x) << PAS_MAC_IPC_CHNL_DCHNO_S) & \
+ PAS_MAC_IPC_CHNL_DCHNO_M)
+#define PAS_MAC_IPC_CHNL_BCH_M 0x0000003f
+#define PAS_MAC_IPC_CHNL_BCH_S 0
+#define PAS_MAC_IPC_CHNL_BCH(x) (((x) << PAS_MAC_IPC_CHNL_BCH_S) & \
+ PAS_MAC_IPC_CHNL_BCH_M)
+
+/* All these registers live in the PCI configuration space for the DMA PCI
+ * device. Use the normal PCI config access functions for them.
+ */
+enum {
+ PAS_DMA_COM_TXCMD = 0x100, /* Transmit Command Register */
+ PAS_DMA_COM_TXSTA = 0x104, /* Transmit Status Register */
+ PAS_DMA_COM_RXCMD = 0x108, /* Receive Command Register */
+ PAS_DMA_COM_RXSTA = 0x10c, /* Receive Status Register */
+};
+#define PAS_DMA_COM_TXCMD_EN 0x00000001 /* enable */
+#define PAS_DMA_COM_TXSTA_ACT 0x00000001 /* active */
+#define PAS_DMA_COM_RXCMD_EN 0x00000001 /* enable */
+#define PAS_DMA_COM_RXSTA_ACT 0x00000001 /* active */
+
+
+/* Per-interface and per-channel registers */
+#define _PAS_DMA_RXINT_STRIDE 0x20
+#define PAS_DMA_RXINT_RCMDSTA(i) (0x200+(i)*_PAS_DMA_RXINT_STRIDE)
+#define PAS_DMA_RXINT_RCMDSTA_EN 0x00000001
+#define PAS_DMA_RXINT_RCMDSTA_ST 0x00000002
+#define PAS_DMA_RXINT_RCMDSTA_OO 0x00000100
+#define PAS_DMA_RXINT_RCMDSTA_BP 0x00000200
+#define PAS_DMA_RXINT_RCMDSTA_DR 0x00000400
+#define PAS_DMA_RXINT_RCMDSTA_BT 0x00000800
+#define PAS_DMA_RXINT_RCMDSTA_TB 0x00001000
+#define PAS_DMA_RXINT_RCMDSTA_ACT 0x00010000
+#define PAS_DMA_RXINT_RCMDSTA_DROPS_M 0xfffe0000
+#define PAS_DMA_RXINT_RCMDSTA_DROPS_S 17
+#define PAS_DMA_RXINT_INCR(i) (0x210+(i)*_PAS_DMA_RXINT_STRIDE)
+#define PAS_DMA_RXINT_INCR_INCR_M 0x0000ffff
+#define PAS_DMA_RXINT_INCR_INCR_S 0
+#define PAS_DMA_RXINT_INCR_INCR(x) ((x) & 0x0000ffff)
+#define PAS_DMA_RXINT_BASEL(i) (0x218+(i)*_PAS_DMA_RXINT_STRIDE)
+#define PAS_DMA_RXINT_BASEL_BRBL(x) ((x) & ~0x3f)
+#define PAS_DMA_RXINT_BASEU(i) (0x21c+(i)*_PAS_DMA_RXINT_STRIDE)
+#define PAS_DMA_RXINT_BASEU_BRBH(x) ((x) & 0xfff)
+#define PAS_DMA_RXINT_BASEU_SIZ_M 0x3fff0000 /* # of cache lines worth of buffer ring */
+#define PAS_DMA_RXINT_BASEU_SIZ_S 16 /* 0 = 16K */
+#define PAS_DMA_RXINT_BASEU_SIZ(x) (((x) << PAS_DMA_RXINT_BASEU_SIZ_S) & \
+ PAS_DMA_RXINT_BASEU_SIZ_M)
+
+
+#define _PAS_DMA_TXCHAN_STRIDE 0x20 /* Size per channel */
+#define _PAS_DMA_TXCHAN_TCMDSTA 0x300 /* Command / Status */
+#define _PAS_DMA_TXCHAN_CFG 0x304 /* Configuration */
+#define _PAS_DMA_TXCHAN_DSCRBU 0x308 /* Descriptor BU Allocation */
+#define _PAS_DMA_TXCHAN_INCR 0x310 /* Descriptor increment */
+#define _PAS_DMA_TXCHAN_CNT 0x314 /* Descriptor count/offset */
+#define _PAS_DMA_TXCHAN_BASEL 0x318 /* Descriptor ring base (low) */
+#define _PAS_DMA_TXCHAN_BASEU 0x31c /* (high) */
+#define PAS_DMA_TXCHAN_TCMDSTA(c) (0x300+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_TCMDSTA_EN 0x00000001 /* Enabled */
+#define PAS_DMA_TXCHAN_TCMDSTA_ST 0x00000002 /* Stop interface */
+#define PAS_DMA_TXCHAN_TCMDSTA_ACT 0x00010000 /* Active */
+#define PAS_DMA_TXCHAN_CFG(c) (0x304+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_CFG_TY_IFACE 0x00000000 /* Type = interface */
+#define PAS_DMA_TXCHAN_CFG_TATTR_M 0x0000003c
+#define PAS_DMA_TXCHAN_CFG_TATTR_S 2
+#define PAS_DMA_TXCHAN_CFG_TATTR(x) (((x) << PAS_DMA_TXCHAN_CFG_TATTR_S) & \
+ PAS_DMA_TXCHAN_CFG_TATTR_M)
+#define PAS_DMA_TXCHAN_CFG_WT_M 0x000001c0
+#define PAS_DMA_TXCHAN_CFG_WT_S 6
+#define PAS_DMA_TXCHAN_CFG_WT(x) (((x) << PAS_DMA_TXCHAN_CFG_WT_S) & \
+ PAS_DMA_TXCHAN_CFG_WT_M)
+#define PAS_DMA_TXCHAN_CFG_CF 0x00001000 /* Clean first line */
+#define PAS_DMA_TXCHAN_CFG_CL 0x00002000 /* Clean last line */
+#define PAS_DMA_TXCHAN_CFG_UP 0x00004000 /* update tx descr when sent */
+#define PAS_DMA_TXCHAN_INCR(c) (0x310+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL(c) (0x318+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEL_BRBL_M 0xffffffc0
+#define PAS_DMA_TXCHAN_BASEL_BRBL_S 0
+#define PAS_DMA_TXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_TXCHAN_BASEL_BRBL_S) & \
+ PAS_DMA_TXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_TXCHAN_BASEU(c) (0x31c+(c)*_PAS_DMA_TXCHAN_STRIDE)
+#define PAS_DMA_TXCHAN_BASEU_BRBH_M 0x00000fff
+#define PAS_DMA_TXCHAN_BASEU_BRBH_S 0
+#define PAS_DMA_TXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_TXCHAN_BASEU_BRBH_S) & \
+ PAS_DMA_TXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define PAS_DMA_TXCHAN_BASEU_SIZ_M 0x3fff0000
+#define PAS_DMA_TXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */
+#define PAS_DMA_TXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_TXCHAN_BASEU_SIZ_S) & \
+ PAS_DMA_TXCHAN_BASEU_SIZ_M)
+
+#define _PAS_DMA_RXCHAN_STRIDE 0x20 /* Size per channel */
+#define _PAS_DMA_RXCHAN_CCMDSTA 0x800 /* Command / Status */
+#define _PAS_DMA_RXCHAN_CFG 0x804 /* Configuration */
+#define _PAS_DMA_RXCHAN_INCR 0x810 /* Descriptor increment */
+#define _PAS_DMA_RXCHAN_CNT 0x814 /* Descriptor count/offset */
+#define _PAS_DMA_RXCHAN_BASEL 0x818 /* Descriptor ring base (low) */
+#define _PAS_DMA_RXCHAN_BASEU 0x81c /* (high) */
+#define PAS_DMA_RXCHAN_CCMDSTA(c) (0x800+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_CCMDSTA_EN 0x00000001 /* Enabled */
+#define PAS_DMA_RXCHAN_CCMDSTA_ST 0x00000002 /* Stop interface */
+#define PAS_DMA_RXCHAN_CCMDSTA_ACT 0x00010000 /* Active */
+#define PAS_DMA_RXCHAN_CCMDSTA_DU 0x00020000
+#define PAS_DMA_RXCHAN_CFG(c) (0x804+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_CFG_HBU_M 0x00000380
+#define PAS_DMA_RXCHAN_CFG_HBU_S 7
+#define PAS_DMA_RXCHAN_CFG_HBU(x) (((x) << PAS_DMA_RXCHAN_CFG_HBU_S) & \
+ PAS_DMA_RXCHAN_CFG_HBU_M)
+#define PAS_DMA_RXCHAN_INCR(c) (0x810+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEL(c) (0x818+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEL_BRBL_M 0xffffffc0
+#define PAS_DMA_RXCHAN_BASEL_BRBL_S 0
+#define PAS_DMA_RXCHAN_BASEL_BRBL(x) (((x) << PAS_DMA_RXCHAN_BASEL_BRBL_S) & \
+ PAS_DMA_RXCHAN_BASEL_BRBL_M)
+#define PAS_DMA_RXCHAN_BASEU(c) (0x81c+(c)*_PAS_DMA_RXCHAN_STRIDE)
+#define PAS_DMA_RXCHAN_BASEU_BRBH_M 0x00000fff
+#define PAS_DMA_RXCHAN_BASEU_BRBH_S 0
+#define PAS_DMA_RXCHAN_BASEU_BRBH(x) (((x) << PAS_DMA_RXCHAN_BASEU_BRBH_S) & \
+ PAS_DMA_RXCHAN_BASEU_BRBH_M)
+/* # of cache lines worth of buffer ring */
+#define PAS_DMA_RXCHAN_BASEU_SIZ_M 0x3fff0000
+#define PAS_DMA_RXCHAN_BASEU_SIZ_S 16 /* 0 = 16K */
+#define PAS_DMA_RXCHAN_BASEU_SIZ(x) (((x) << PAS_DMA_RXCHAN_BASEU_SIZ_S) & \
+ PAS_DMA_RXCHAN_BASEU_SIZ_M)
+
+#define PAS_STATUS_PCNT_M 0x000000000000ffffull
+#define PAS_STATUS_PCNT_S 0
+#define PAS_STATUS_DCNT_M 0x00000000ffff0000ull
+#define PAS_STATUS_DCNT_S 16
+#define PAS_STATUS_BPCNT_M 0x0000ffff00000000ull
+#define PAS_STATUS_BPCNT_S 32
+#define PAS_STATUS_TIMER 0x1000000000000000ull
+#define PAS_STATUS_ERROR 0x2000000000000000ull
+#define PAS_STATUS_SOFT 0x4000000000000000ull
+#define PAS_STATUS_INT 0x8000000000000000ull
+
+#define PAS_IOB_DMA_RXCH_CFG(i) (0x1100 + (i)*4)
+#define PAS_IOB_DMA_RXCH_CFG_CNTTH_M 0x00000fff
+#define PAS_IOB_DMA_RXCH_CFG_CNTTH_S 0
+#define PAS_IOB_DMA_RXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_RXCH_CFG_CNTTH_S) & \
+ PAS_IOB_DMA_RXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_TXCH_CFG(i) (0x1200 + (i)*4)
+#define PAS_IOB_DMA_TXCH_CFG_CNTTH_M 0x00000fff
+#define PAS_IOB_DMA_TXCH_CFG_CNTTH_S 0
+#define PAS_IOB_DMA_TXCH_CFG_CNTTH(x) (((x) << PAS_IOB_DMA_TXCH_CFG_CNTTH_S) & \
+ PAS_IOB_DMA_TXCH_CFG_CNTTH_M)
+#define PAS_IOB_DMA_RXCH_STAT(i) (0x1300 + (i)*4)
+#define PAS_IOB_DMA_RXCH_STAT_INTGEN 0x00001000
+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_M 0x00000fff
+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL_S 0
+#define PAS_IOB_DMA_RXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_RXCH_STAT_CNTDEL_S) &\
+ PAS_IOB_DMA_RXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_TXCH_STAT(i) (0x1400 + (i)*4)
+#define PAS_IOB_DMA_TXCH_STAT_INTGEN 0x00001000
+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_M 0x00000fff
+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL_S 0
+#define PAS_IOB_DMA_TXCH_STAT_CNTDEL(x) (((x) << PAS_IOB_DMA_TXCH_STAT_CNTDEL_S) &\
+ PAS_IOB_DMA_TXCH_STAT_CNTDEL_M)
+#define PAS_IOB_DMA_RXCH_RESET(i) (0x1500 + (i)*4)
+#define PAS_IOB_DMA_RXCH_RESET_PCNT_M 0xffff0000
+#define PAS_IOB_DMA_RXCH_RESET_PCNT_S 0
+#define PAS_IOB_DMA_RXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_RXCH_RESET_PCNT_S) & \
+ PAS_IOB_DMA_RXCH_RESET_PCNT_M)
+#define PAS_IOB_DMA_RXCH_RESET_PCNTRST 0x00000020
+#define PAS_IOB_DMA_RXCH_RESET_DCNTRST 0x00000010
+#define PAS_IOB_DMA_RXCH_RESET_TINTC 0x00000008
+#define PAS_IOB_DMA_RXCH_RESET_DINTC 0x00000004
+#define PAS_IOB_DMA_RXCH_RESET_SINTC 0x00000002
+#define PAS_IOB_DMA_RXCH_RESET_PINTC 0x00000001
+#define PAS_IOB_DMA_TXCH_RESET(i) (0x1600 + (i)*4)
+#define PAS_IOB_DMA_TXCH_RESET_PCNT_M 0xffff0000
+#define PAS_IOB_DMA_TXCH_RESET_PCNT_S 0
+#define PAS_IOB_DMA_TXCH_RESET_PCNT(x) (((x) << PAS_IOB_DMA_TXCH_RESET_PCNT_S) & \
+ PAS_IOB_DMA_TXCH_RESET_PCNT_M)
+#define PAS_IOB_DMA_TXCH_RESET_PCNTRST 0x00000020
+#define PAS_IOB_DMA_TXCH_RESET_DCNTRST 0x00000010
+#define PAS_IOB_DMA_TXCH_RESET_TINTC 0x00000008
+#define PAS_IOB_DMA_TXCH_RESET_DINTC 0x00000004
+#define PAS_IOB_DMA_TXCH_RESET_SINTC 0x00000002
+#define PAS_IOB_DMA_TXCH_RESET_PINTC 0x00000001
+
+#define PAS_IOB_DMA_COM_TIMEOUTCFG 0x1700
+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M 0x00ffffff
+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S 0
+#define PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT(x) (((x) << PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_S) & \
+ PAS_IOB_DMA_COM_TIMEOUTCFG_TCNT_M)
+
+/* Transmit descriptor fields */
+#define XCT_MACTX_T 0x8000000000000000ull
+#define XCT_MACTX_ST 0x4000000000000000ull
+#define XCT_MACTX_NORES 0x0000000000000000ull
+#define XCT_MACTX_8BRES 0x1000000000000000ull
+#define XCT_MACTX_24BRES 0x2000000000000000ull
+#define XCT_MACTX_40BRES 0x3000000000000000ull
+#define XCT_MACTX_I 0x0800000000000000ull
+#define XCT_MACTX_O 0x0400000000000000ull
+#define XCT_MACTX_E 0x0200000000000000ull
+#define XCT_MACTX_VLAN_M 0x0180000000000000ull
+#define XCT_MACTX_VLAN_NOP 0x0000000000000000ull
+#define XCT_MACTX_VLAN_REMOVE 0x0080000000000000ull
+#define XCT_MACTX_VLAN_INSERT 0x0100000000000000ull
+#define XCT_MACTX_VLAN_REPLACE 0x0180000000000000ull
+#define XCT_MACTX_CRC_M 0x0060000000000000ull
+#define XCT_MACTX_CRC_NOP 0x0000000000000000ull
+#define XCT_MACTX_CRC_INSERT 0x0020000000000000ull
+#define XCT_MACTX_CRC_PAD 0x0040000000000000ull
+#define XCT_MACTX_CRC_REPLACE 0x0060000000000000ull
+#define XCT_MACTX_SS 0x0010000000000000ull
+#define XCT_MACTX_LLEN_M 0x00007fff00000000ull
+#define XCT_MACTX_LLEN_S 32ull
+#define XCT_MACTX_LLEN(x) ((((long)(x)) << XCT_MACTX_LLEN_S) & \
+ XCT_MACTX_LLEN_M)
+#define XCT_MACTX_IPH_M 0x00000000f8000000ull
+#define XCT_MACTX_IPH_S 27ull
+#define XCT_MACTX_IPH(x) ((((long)(x)) << XCT_MACTX_IPH_S) & \
+ XCT_MACTX_IPH_M)
+#define XCT_MACTX_IPO_M 0x0000000007c00000ull
+#define XCT_MACTX_IPO_S 22ull
+#define XCT_MACTX_IPO(x) ((((long)(x)) << XCT_MACTX_IPO_S) & \
+ XCT_MACTX_IPO_M)
+#define XCT_MACTX_CSUM_M 0x0000000000000060ull
+#define XCT_MACTX_CSUM_NOP 0x0000000000000000ull
+#define XCT_MACTX_CSUM_TCP 0x0000000000000040ull
+#define XCT_MACTX_CSUM_UDP 0x0000000000000060ull
+#define XCT_MACTX_V6 0x0000000000000010ull
+#define XCT_MACTX_C 0x0000000000000004ull
+#define XCT_MACTX_AL2 0x0000000000000002ull
+
+/* Receive descriptor fields */
+#define XCT_MACRX_T 0x8000000000000000ull
+#define XCT_MACRX_ST 0x4000000000000000ull
+#define XCT_MACRX_NORES 0x0000000000000000ull
+#define XCT_MACRX_8BRES 0x1000000000000000ull
+#define XCT_MACRX_24BRES 0x2000000000000000ull
+#define XCT_MACRX_40BRES 0x3000000000000000ull
+#define XCT_MACRX_O 0x0400000000000000ull
+#define XCT_MACRX_E 0x0200000000000000ull
+#define XCT_MACRX_FF 0x0100000000000000ull
+#define XCT_MACRX_PF 0x0080000000000000ull
+#define XCT_MACRX_OB 0x0040000000000000ull
+#define XCT_MACRX_OD 0x0020000000000000ull
+#define XCT_MACRX_FS 0x0010000000000000ull
+#define XCT_MACRX_NB_M 0x000fc00000000000ull
+#define XCT_MACRX_NB_S 46ULL
+#define XCT_MACRX_NB(x) ((((long)(x)) << XCT_MACRX_NB_S) & \
+ XCT_MACRX_NB_M)
+#define XCT_MACRX_LLEN_M 0x00003fff00000000ull
+#define XCT_MACRX_LLEN_S 32ULL
+#define XCT_MACRX_LLEN(x) ((((long)(x)) << XCT_MACRX_LLEN_S) & \
+ XCT_MACRX_LLEN_M)
+#define XCT_MACRX_CRC 0x0000000080000000ull
+#define XCT_MACRX_LEN_M 0x0000000060000000ull
+#define XCT_MACRX_LEN_TOOSHORT 0x0000000020000000ull
+#define XCT_MACRX_LEN_BELOWMIN 0x0000000040000000ull
+#define XCT_MACRX_LEN_TRUNC 0x0000000060000000ull
+#define XCT_MACRX_CAST_M 0x0000000018000000ull
+#define XCT_MACRX_CAST_UNI 0x0000000000000000ull
+#define XCT_MACRX_CAST_MULTI 0x0000000008000000ull
+#define XCT_MACRX_CAST_BROAD 0x0000000010000000ull
+#define XCT_MACRX_CAST_PAUSE 0x0000000018000000ull
+#define XCT_MACRX_VLC_M 0x0000000006000000ull
+#define XCT_MACRX_FM 0x0000000001000000ull
+#define XCT_MACRX_HTY_M 0x0000000000c00000ull
+#define XCT_MACRX_HTY_IPV4_OK 0x0000000000000000ull
+#define XCT_MACRX_HTY_IPV6 0x0000000000400000ull
+#define XCT_MACRX_HTY_IPV4_BAD 0x0000000000800000ull
+#define XCT_MACRX_HTY_NONIP 0x0000000000c00000ull
+#define XCT_MACRX_IPP_M 0x00000000003f0000ull
+#define XCT_MACRX_IPP_S 16
+#define XCT_MACRX_CSUM_M 0x000000000000ffffull
+#define XCT_MACRX_CSUM_S 0
+
+#define XCT_PTR_T 0x8000000000000000ull
+#define XCT_PTR_LEN_M 0x7ffff00000000000ull
+#define XCT_PTR_LEN_S 44
+#define XCT_PTR_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & \
+ XCT_PTR_LEN_M)
+#define XCT_PTR_ADDR_M 0x00000fffffffffffull
+#define XCT_PTR_ADDR_S 0
+#define XCT_PTR_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & \
+ XCT_PTR_ADDR_M)
+
+/* Receive interface buffer fields */
+#define XCT_RXB_LEN_M 0x0ffff00000000000ull
+#define XCT_RXB_LEN_S 44
+#define XCT_RXB_LEN(x) ((((long)(x)) << XCT_PTR_LEN_S) & XCT_PTR_LEN_M)
+#define XCT_RXB_ADDR_M 0x00000fffffffffffull
+#define XCT_RXB_ADDR_S 0
+#define XCT_RXB_ADDR(x) ((((long)(x)) << XCT_PTR_ADDR_S) & XCT_PTR_ADDR_M)
+
+
+#endif /* PASEMI_MAC_H */
#include <linux/errno.h>
#include <linux/ioport.h>
#include <linux/ip.h>
+#include <linux/in.h>
#include <linux/if_arp.h>
#include <linux/if_ether.h>
#include <linux/netdevice.h>
static struct pci_device_id ql3xxx_pci_tbl[] __devinitdata = {
{PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3022_DEVICE_ID)},
+ {PCI_DEVICE(PCI_VENDOR_ID_QLOGIC, QL3032_DEVICE_ID)},
/* required last entry */
{0,}
};
2) << 7))
return -1;
+ if (qdev->device_id == QL3032_DEVICE_ID)
+ ql_write_page0_reg(qdev,
+ &port_regs->macMIIMgmtControlReg, 0x0f00000);
+
/* Divide 125MHz clock by 28 to meet PHY timing requirements */
reg = MAC_MII_CONTROL_CLK_SEL_DIV28;
struct ob_mac_iocb_rsp *mac_rsp)
{
struct ql_tx_buf_cb *tx_cb;
+ int i;
tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
pci_unmap_single(qdev->pdev,
- pci_unmap_addr(tx_cb, mapaddr),
- pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
- dev_kfree_skb_irq(tx_cb->skb);
+ pci_unmap_addr(&tx_cb->map[0], mapaddr),
+ pci_unmap_len(&tx_cb->map[0], maplen),
+ PCI_DMA_TODEVICE);
+ tx_cb->seg_count--;
+ if (tx_cb->seg_count) {
+ for (i = 1; i < tx_cb->seg_count; i++) {
+ pci_unmap_page(qdev->pdev,
+ pci_unmap_addr(&tx_cb->map[i],
+ mapaddr),
+ pci_unmap_len(&tx_cb->map[i], maplen),
+ PCI_DMA_TODEVICE);
+ }
+ }
qdev->stats.tx_packets++;
qdev->stats.tx_bytes += tx_cb->skb->len;
+ dev_kfree_skb_irq(tx_cb->skb);
tx_cb->skb = NULL;
atomic_inc(&qdev->tx_count);
}
+/*
+ * The difference between 3022 and 3032 for inbound completions:
+ * 3022 uses two buffers per completion. The first buffer contains
+ * (some) header info, the second the remainder of the headers plus
+ * the data. For this chip we reserve some space at the top of the
+ * receive buffer so that the header info in buffer one can be
+ * prepended to the buffer two. Buffer two is the sent up while
+ * buffer one is returned to the hardware to be reused.
+ * 3032 receives all of it's data and headers in one buffer for a
+ * simpler process. 3032 also supports checksum verification as
+ * can be seen in ql_process_macip_rx_intr().
+ */
static void ql_process_mac_rx_intr(struct ql3_adapter *qdev,
struct ib_mac_iocb_rsp *ib_mac_rsp_ptr)
{
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
qdev->small_buf_release_cnt++;
- /* start of first buffer */
- lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
- lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
- qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
- qdev->lrg_buf_index = 0;
- curr_ial_ptr++; /* 64-bit pointers require two incs. */
- curr_ial_ptr++;
+ if (qdev->device_id == QL3022_DEVICE_ID) {
+ /* start of first buffer (3022 only) */
+ lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+ lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
+ qdev->lrg_buf_release_cnt++;
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS) {
+ qdev->lrg_buf_index = 0;
+ }
+ curr_ial_ptr++; /* 64-bit pointers require two incs. */
+ curr_ial_ptr++;
+ }
/* start of second buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
qdev->ndev->last_rx = jiffies;
lrg_buf_cb2->skb = NULL;
- ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
+ if (qdev->device_id == QL3022_DEVICE_ID)
+ ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
}
struct ql_rcv_buf_cb *lrg_buf_cb1 = NULL;
struct ql_rcv_buf_cb *lrg_buf_cb2 = NULL;
u32 *curr_ial_ptr;
- struct sk_buff *skb1, *skb2;
+ struct sk_buff *skb1 = NULL, *skb2;
struct net_device *ndev = qdev->ndev;
u16 length = le16_to_cpu(ib_ip_rsp_ptr->length);
u16 size = 0;
qdev->last_rsp_offset = qdev->small_buf_phy_addr_low + offset;
qdev->small_buf_release_cnt++;
- /* start of first buffer */
- lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
- lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
-
- qdev->lrg_buf_release_cnt++;
- if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
- qdev->lrg_buf_index = 0;
- skb1 = lrg_buf_cb1->skb;
- curr_ial_ptr++; /* 64-bit pointers require two incs. */
- curr_ial_ptr++;
+ if (qdev->device_id == QL3022_DEVICE_ID) {
+ /* start of first buffer on 3022 */
+ lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
+ lrg_buf_cb1 = &qdev->lrg_buf[qdev->lrg_buf_index];
+ qdev->lrg_buf_release_cnt++;
+ if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
+ qdev->lrg_buf_index = 0;
+ skb1 = lrg_buf_cb1->skb;
+ curr_ial_ptr++; /* 64-bit pointers require two incs. */
+ curr_ial_ptr++;
+ size = ETH_HLEN;
+ if (*((u16 *) skb1->data) != 0xFFFF)
+ size += VLAN_ETH_HLEN - ETH_HLEN;
+ }
/* start of second buffer */
lrg_buf_phy_addr_low = le32_to_cpu(*curr_ial_ptr);
if (++qdev->lrg_buf_index == NUM_LARGE_BUFFERS)
qdev->lrg_buf_index = 0;
- qdev->stats.rx_packets++;
- qdev->stats.rx_bytes += length;
-
- /*
- * Copy the ethhdr from first buffer to second. This
- * is necessary for IP completions.
- */
- if (*((u16 *) skb1->data) != 0xFFFF)
- size = VLAN_ETH_HLEN;
- else
- size = ETH_HLEN;
-
skb_put(skb2, length); /* Just the second buffer length here. */
pci_unmap_single(qdev->pdev,
pci_unmap_addr(lrg_buf_cb2, mapaddr),
PCI_DMA_FROMDEVICE);
prefetch(skb2->data);
- memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size);
- skb2->dev = qdev->ndev;
skb2->ip_summed = CHECKSUM_NONE;
+ if (qdev->device_id == QL3022_DEVICE_ID) {
+ /*
+ * Copy the ethhdr from first buffer to second. This
+ * is necessary for 3022 IP completions.
+ */
+ memcpy(skb_push(skb2, size), skb1->data + VLAN_ID_LEN, size);
+ } else {
+ u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
+ if (checksum &
+ (IB_IP_IOCB_RSP_3032_ICE |
+ IB_IP_IOCB_RSP_3032_CE |
+ IB_IP_IOCB_RSP_3032_NUC)) {
+ printk(KERN_ERR
+ "%s: Bad checksum for this %s packet, checksum = %x.\n",
+ __func__,
+ ((checksum &
+ IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
+ "UDP"),checksum);
+ } else if (checksum & IB_IP_IOCB_RSP_3032_TCP) {
+ skb2->ip_summed = CHECKSUM_UNNECESSARY;
+ }
+ }
+ skb2->dev = qdev->ndev;
skb2->protocol = eth_type_trans(skb2, qdev->ndev);
netif_receive_skb(skb2);
+ qdev->stats.rx_packets++;
+ qdev->stats.rx_bytes += length;
ndev->last_rx = jiffies;
lrg_buf_cb2->skb = NULL;
- ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
+ if (qdev->device_id == QL3022_DEVICE_ID)
+ ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb1);
ql_release_to_lrg_buf_free_list(qdev, lrg_buf_cb2);
}
break;
case OPCODE_IB_MAC_IOCB:
+ case OPCODE_IB_3032_MAC_IOCB:
ql_process_mac_rx_intr(qdev, (struct ib_mac_iocb_rsp *)
net_rsp);
(*rx_cleaned)++;
break;
case OPCODE_IB_IP_IOCB:
+ case OPCODE_IB_3032_IP_IOCB:
ql_process_macip_rx_intr(qdev, (struct ib_ip_iocb_rsp *)
net_rsp);
(*rx_cleaned)++;
return IRQ_RETVAL(handled);
}
+/*
+ * Get the total number of segments needed for the
+ * given number of fragments. This is necessary because
+ * outbound address lists (OAL) will be used when more than
+ * two frags are given. Each address list has 5 addr/len
+ * pairs. The 5th pair in each AOL is used to point to
+ * the next AOL if more frags are coming.
+ * That is why the frags:segment count ratio is not linear.
+ */
+static int ql_get_seg_count(unsigned short frags)
+{
+ switch(frags) {
+ case 0: return 1; /* just the skb->data seg */
+ case 1: return 2; /* skb->data + 1 frag */
+ case 2: return 3; /* skb->data + 2 frags */
+ case 3: return 5; /* skb->data + 1 frag + 1 AOL containting 2 frags */
+ case 4: return 6;
+ case 5: return 7;
+ case 6: return 8;
+ case 7: return 10;
+ case 8: return 11;
+ case 9: return 12;
+ case 10: return 13;
+ case 11: return 15;
+ case 12: return 16;
+ case 13: return 17;
+ case 14: return 18;
+ case 15: return 20;
+ case 16: return 21;
+ case 17: return 22;
+ case 18: return 23;
+ }
+ return -1;
+}
+
+static void ql_hw_csum_setup(struct sk_buff *skb,
+ struct ob_mac_iocb_req *mac_iocb_ptr)
+{
+ struct ethhdr *eth;
+ struct iphdr *ip = NULL;
+ u8 offset = ETH_HLEN;
+
+ eth = (struct ethhdr *)(skb->data);
+
+ if (eth->h_proto == __constant_htons(ETH_P_IP)) {
+ ip = (struct iphdr *)&skb->data[ETH_HLEN];
+ } else if (eth->h_proto == htons(ETH_P_8021Q) &&
+ ((struct vlan_ethhdr *)skb->data)->
+ h_vlan_encapsulated_proto == __constant_htons(ETH_P_IP)) {
+ ip = (struct iphdr *)&skb->data[VLAN_ETH_HLEN];
+ offset = VLAN_ETH_HLEN;
+ }
+
+ if (ip) {
+ if (ip->protocol == IPPROTO_TCP) {
+ mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_TC;
+ mac_iocb_ptr->ip_hdr_off = offset;
+ mac_iocb_ptr->ip_hdr_len = ip->ihl;
+ } else if (ip->protocol == IPPROTO_UDP) {
+ mac_iocb_ptr->flags1 |= OB_3032MAC_IOCB_REQ_UC;
+ mac_iocb_ptr->ip_hdr_off = offset;
+ mac_iocb_ptr->ip_hdr_len = ip->ihl;
+ }
+ }
+}
+
+/*
+ * The difference between 3022 and 3032 sends:
+ * 3022 only supports a simple single segment transmission.
+ * 3032 supports checksumming and scatter/gather lists (fragments).
+ * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
+ * in the IOCB plus a chain of outbound address lists (OAL) that
+ * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
+ * will used to point to an OAL when more ALP entries are required.
+ * The IOCB is always the top of the chain followed by one or more
+ * OALs (when necessary).
+ */
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
{
struct ql3_adapter *qdev = (struct ql3_adapter *)netdev_priv(ndev);
struct ql3xxx_port_registers __iomem *port_regs = qdev->mem_map_registers;
struct ql_tx_buf_cb *tx_cb;
+ u32 tot_len = skb->len;
+ struct oal *oal;
+ struct oal_entry *oal_entry;
+ int len;
struct ob_mac_iocb_req *mac_iocb_ptr;
u64 map;
+ int seg_cnt, seg = 0;
+ int frag_cnt = (int)skb_shinfo(skb)->nr_frags;
if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
if (!netif_queue_stopped(ndev))
return NETDEV_TX_BUSY;
}
tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
+ seg_cnt = tx_cb->seg_count = ql_get_seg_count((skb_shinfo(skb)->nr_frags));
+ if(seg_cnt == -1) {
+ printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
+ return NETDEV_TX_OK;
+
+ }
mac_iocb_ptr = tx_cb->queue_entry;
memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
mac_iocb_ptr->flags |= qdev->mb_bit_mask;
mac_iocb_ptr->transaction_id = qdev->req_producer_index;
- mac_iocb_ptr->data_len = cpu_to_le16((u16) skb->len);
+ mac_iocb_ptr->data_len = cpu_to_le16((u16) tot_len);
tx_cb->skb = skb;
- map = pci_map_single(qdev->pdev, skb->data, skb->len, PCI_DMA_TODEVICE);
- mac_iocb_ptr->buf_addr0_low = cpu_to_le32(LS_64BITS(map));
- mac_iocb_ptr->buf_addr0_high = cpu_to_le32(MS_64BITS(map));
- mac_iocb_ptr->buf_0_len = cpu_to_le32(skb->len | OB_MAC_IOCB_REQ_E);
- pci_unmap_addr_set(tx_cb, mapaddr, map);
- pci_unmap_len_set(tx_cb, maplen, skb->len);
- atomic_dec(&qdev->tx_count);
+ if (skb->ip_summed == CHECKSUM_PARTIAL)
+ ql_hw_csum_setup(skb, mac_iocb_ptr);
+ len = skb_headlen(skb);
+ map = pci_map_single(qdev->pdev, skb->data, len, PCI_DMA_TODEVICE);
+ oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
+ oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
+ oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
+ oal_entry->len = cpu_to_le32(len);
+ pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
+ pci_unmap_len_set(&tx_cb->map[seg], maplen, len);
+ seg++;
+
+ if (!skb_shinfo(skb)->nr_frags) {
+ /* Terminate the last segment. */
+ oal_entry->len =
+ cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
+ } else {
+ int i;
+ oal = tx_cb->oal;
+ for (i=0; i<frag_cnt; i++,seg++) {
+ skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
+ oal_entry++;
+ if ((seg == 2 && seg_cnt > 3) || /* Check for continuation */
+ (seg == 7 && seg_cnt > 8) || /* requirements. It's strange */
+ (seg == 12 && seg_cnt > 13) || /* but necessary. */
+ (seg == 17 && seg_cnt > 18)) {
+ /* Continuation entry points to outbound address list. */
+ map = pci_map_single(qdev->pdev, oal,
+ sizeof(struct oal),
+ PCI_DMA_TODEVICE);
+ oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
+ oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
+ oal_entry->len =
+ cpu_to_le32(sizeof(struct oal) |
+ OAL_CONT_ENTRY);
+ pci_unmap_addr_set(&tx_cb->map[seg], mapaddr,
+ map);
+ pci_unmap_len_set(&tx_cb->map[seg], maplen,
+ len);
+ oal_entry = (struct oal_entry *)oal;
+ oal++;
+ seg++;
+ }
+ map =
+ pci_map_page(qdev->pdev, frag->page,
+ frag->page_offset, frag->size,
+ PCI_DMA_TODEVICE);
+ oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
+ oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
+ oal_entry->len = cpu_to_le32(frag->size);
+ pci_unmap_addr_set(&tx_cb->map[seg], mapaddr, map);
+ pci_unmap_len_set(&tx_cb->map[seg], maplen,
+ frag->size);
+ }
+ /* Terminate the last segment. */
+ oal_entry->len =
+ cpu_to_le32(le32_to_cpu(oal_entry->len) | OAL_LAST_ENTRY);
+ }
+ wmb();
qdev->req_producer_index++;
if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
qdev->req_producer_index = 0;
printk(KERN_DEBUG PFX "%s: tx queued, slot %d, len %d\n",
ndev->name, qdev->req_producer_index, skb->len);
+ atomic_dec(&qdev->tx_count);
return NETDEV_TX_OK;
}
+
static int ql_alloc_net_req_rsp_queues(struct ql3_adapter *qdev)
{
qdev->req_q_size =
return 0;
}
-static void ql_create_send_free_list(struct ql3_adapter *qdev)
+static void ql_free_send_free_list(struct ql3_adapter *qdev)
+{
+ struct ql_tx_buf_cb *tx_cb;
+ int i;
+
+ tx_cb = &qdev->tx_buf[0];
+ for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
+ if (tx_cb->oal) {
+ kfree(tx_cb->oal);
+ tx_cb->oal = NULL;
+ }
+ tx_cb++;
+ }
+}
+
+static int ql_create_send_free_list(struct ql3_adapter *qdev)
{
struct ql_tx_buf_cb *tx_cb;
int i;
/* Create free list of transmit buffers */
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
+
tx_cb = &qdev->tx_buf[i];
tx_cb->skb = NULL;
tx_cb->queue_entry = req_q_curr;
req_q_curr++;
+ tx_cb->oal = kmalloc(512, GFP_KERNEL);
+ if (tx_cb->oal == NULL)
+ return -1;
}
+ return 0;
}
static int ql_alloc_mem_resources(struct ql3_adapter *qdev)
/* Initialize the large buffer queue. */
ql_init_large_buffers(qdev);
- ql_create_send_free_list(qdev);
+ if (ql_create_send_free_list(qdev))
+ goto err_free_list;
qdev->rsp_current = qdev->rsp_q_virt_addr;
return 0;
-
+err_free_list:
+ ql_free_send_free_list(qdev);
err_small_buffers:
ql_free_buffer_queues(qdev);
err_buffer_queues:
static void ql_free_mem_resources(struct ql3_adapter *qdev)
{
+ ql_free_send_free_list(qdev);
ql_free_large_buffers(qdev);
ql_free_small_buffers(qdev);
ql_free_buffer_queues(qdev);
}
/* Enable Ethernet Function */
- value =
- (PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
- PORT_CONTROL_HH);
- ql_write_page0_reg(qdev, &port_regs->portControl,
- ((value << 16) | value));
+ if (qdev->device_id == QL3032_DEVICE_ID) {
+ value =
+ (QL3032_PORT_CONTROL_EF | QL3032_PORT_CONTROL_KIE |
+ QL3032_PORT_CONTROL_EIv6 | QL3032_PORT_CONTROL_EIv4);
+ ql_write_page0_reg(qdev, &port_regs->functionControl,
+ ((value << 16) | value));
+ } else {
+ value =
+ (PORT_CONTROL_EF | PORT_CONTROL_ET | PORT_CONTROL_EI |
+ PORT_CONTROL_HH);
+ ql_write_page0_reg(qdev, &port_regs->portControl,
+ ((value << 16) | value));
+ }
+
out:
return status;
struct pci_dev *pdev = qdev->pdev;
printk(KERN_INFO PFX
- "\n%s Adapter %d RevisionID %d found on PCI slot %d.\n",
- DRV_NAME, qdev->index, qdev->chip_rev_id, qdev->pci_slot);
+ "\n%s Adapter %d RevisionID %d found %s on PCI slot %d.\n",
+ DRV_NAME, qdev->index, qdev->chip_rev_id,
+ (qdev->device_id == QL3032_DEVICE_ID) ? "QLA3032" : "QLA3022",
+ qdev->pci_slot);
printk(KERN_INFO PFX
"%s Interface.\n",
test_bit(QL_LINK_OPTICAL,&qdev->flags) ? "OPTICAL" : "COPPER");
* Loop through the active list and return the skb.
*/
for (i = 0; i < NUM_REQ_Q_ENTRIES; i++) {
+ int j;
tx_cb = &qdev->tx_buf[i];
if (tx_cb->skb) {
-
printk(KERN_DEBUG PFX
"%s: Freeing lost SKB.\n",
qdev->ndev->name);
pci_unmap_single(qdev->pdev,
- pci_unmap_addr(tx_cb, mapaddr),
- pci_unmap_len(tx_cb, maplen), PCI_DMA_TODEVICE);
+ pci_unmap_addr(&tx_cb->map[0], mapaddr),
+ pci_unmap_len(&tx_cb->map[0], maplen),
+ PCI_DMA_TODEVICE);
+ for(j=1;j<tx_cb->seg_count;j++) {
+ pci_unmap_page(qdev->pdev,
+ pci_unmap_addr(&tx_cb->map[j],mapaddr),
+ pci_unmap_len(&tx_cb->map[j],maplen),
+ PCI_DMA_TODEVICE);
+ }
dev_kfree_skb(tx_cb->skb);
tx_cb->skb = NULL;
}
SET_MODULE_OWNER(ndev);
SET_NETDEV_DEV(ndev, &pdev->dev);
- if (pci_using_dac)
- ndev->features |= NETIF_F_HIGHDMA;
-
pci_set_drvdata(pdev, ndev);
qdev = netdev_priv(ndev);
qdev->index = cards_found;
qdev->ndev = ndev;
qdev->pdev = pdev;
+ qdev->device_id = pci_entry->device;
qdev->port_link_state = LS_DOWN;
if (msi)
qdev->msi = 1;
qdev->msg_enable = netif_msg_init(debug, default_msg);
+ if (pci_using_dac)
+ ndev->features |= NETIF_F_HIGHDMA;
+ if (qdev->device_id == QL3032_DEVICE_ID)
+ ndev->features |= (NETIF_F_HW_CSUM | NETIF_F_SG);
+
qdev->mem_map_registers =
ioremap_nocache(pci_resource_start(pdev, 1),
pci_resource_len(qdev->pdev, 1));
#define OPCODE_UPDATE_NCB_IOCB 0xF0
#define OPCODE_IB_MAC_IOCB 0xF9
+#define OPCODE_IB_3032_MAC_IOCB 0x09
#define OPCODE_IB_IP_IOCB 0xFA
+#define OPCODE_IB_3032_IP_IOCB 0x0A
#define OPCODE_IB_TCP_IOCB 0xFB
#define OPCODE_DUMP_PROTO_IOCB 0xFE
#define OPCODE_BUFFER_ALERT_IOCB 0xFB
struct ob_mac_iocb_req {
u8 opcode;
u8 flags;
-#define OB_MAC_IOCB_REQ_MA 0xC0
-#define OB_MAC_IOCB_REQ_F 0x20
-#define OB_MAC_IOCB_REQ_X 0x10
+#define OB_MAC_IOCB_REQ_MA 0xe0
+#define OB_MAC_IOCB_REQ_F 0x10
+#define OB_MAC_IOCB_REQ_X 0x08
#define OB_MAC_IOCB_REQ_D 0x02
#define OB_MAC_IOCB_REQ_I 0x01
- __le16 reserved0;
+ u8 flags1;
+#define OB_3032MAC_IOCB_REQ_IC 0x04
+#define OB_3032MAC_IOCB_REQ_TC 0x02
+#define OB_3032MAC_IOCB_REQ_UC 0x01
+ u8 reserved0;
__le32 transaction_id;
__le16 data_len;
- __le16 reserved1;
+ u8 ip_hdr_off;
+ u8 ip_hdr_len;
+ __le32 reserved1;
__le32 reserved2;
- __le32 reserved3;
__le32 buf_addr0_low;
__le32 buf_addr0_high;
__le32 buf_0_len;
__le32 buf_addr2_low;
__le32 buf_addr2_high;
__le32 buf_2_len;
+ __le32 reserved3;
__le32 reserved4;
- __le32 reserved5;
};
/*
* The following constants define control bits for buffer
u8 opcode;
u8 flags;
#define OB_MAC_IOCB_RSP_P 0x08
+#define OB_MAC_IOCB_RSP_L 0x04
#define OB_MAC_IOCB_RSP_S 0x02
#define OB_MAC_IOCB_RSP_I 0x01
struct ib_mac_iocb_rsp {
u8 opcode;
+#define IB_MAC_IOCB_RSP_V 0x80
u8 flags;
#define IB_MAC_IOCB_RSP_S 0x80
#define IB_MAC_IOCB_RSP_H1 0x40
struct ob_ip_iocb_rsp {
u8 opcode;
u8 flags;
+#define OB_MAC_IOCB_RSP_H 0x10
#define OB_MAC_IOCB_RSP_E 0x08
#define OB_MAC_IOCB_RSP_L 0x04
#define OB_MAC_IOCB_RSP_S 0x02
struct ib_ip_iocb_rsp {
u8 opcode;
+#define IB_IP_IOCB_RSP_3032_V 0x80
+#define IB_IP_IOCB_RSP_3032_O 0x40
+#define IB_IP_IOCB_RSP_3032_I 0x20
+#define IB_IP_IOCB_RSP_3032_R 0x10
u8 flags;
#define IB_IP_IOCB_RSP_S 0x80
#define IB_IP_IOCB_RSP_H1 0x40
__le16 length;
__le16 checksum;
+#define IB_IP_IOCB_RSP_3032_ICE 0x01
+#define IB_IP_IOCB_RSP_3032_CE 0x02
+#define IB_IP_IOCB_RSP_3032_NUC 0x04
+#define IB_IP_IOCB_RSP_3032_UDP 0x08
+#define IB_IP_IOCB_RSP_3032_TCP 0x10
+#define IB_IP_IOCB_RSP_3032_IPE 0x20
__le16 reserved;
#define IB_IP_IOCB_RSP_R 0x01
__le32 ial_low;
IP_ADDR_INDEX_REG_FUNC_2_SEC = 0x0005,
IP_ADDR_INDEX_REG_FUNC_3_PRI = 0x0006,
IP_ADDR_INDEX_REG_FUNC_3_SEC = 0x0007,
+ IP_ADDR_INDEX_REG_6 = 0x0008,
+ IP_ADDR_INDEX_REG_OFFSET_MASK = 0x0030,
+ IP_ADDR_INDEX_REG_E = 0x0040,
+};
+enum {
+ QL3032_PORT_CONTROL_DS = 0x0001,
+ QL3032_PORT_CONTROL_HH = 0x0002,
+ QL3032_PORT_CONTROL_EIv6 = 0x0004,
+ QL3032_PORT_CONTROL_EIv4 = 0x0008,
+ QL3032_PORT_CONTROL_ET = 0x0010,
+ QL3032_PORT_CONTROL_EF = 0x0020,
+ QL3032_PORT_CONTROL_DRM = 0x0040,
+ QL3032_PORT_CONTROL_RLB = 0x0080,
+ QL3032_PORT_CONTROL_RCB = 0x0100,
+ QL3032_PORT_CONTROL_KIE = 0x0200,
};
enum {
u32 internalRamWDataReg;
u32 reclaimedBufferAddrRegLow;
u32 reclaimedBufferAddrRegHigh;
- u32 reserved[2];
+ u32 tcpConfiguration;
+ u32 functionControl;
u32 fpgaRevID;
u32 localRamAddr;
u32 localRamDataAutoIncr;
#define QL3XXX_VENDOR_ID 0x1077
#define QL3022_DEVICE_ID 0x3022
+#define QL3032_DEVICE_ID 0x3032
/* MTU & Frame Size stuff */
#define NORMAL_MTU_SIZE ETH_DATA_LEN
int index;
};
+/*
+ * Original IOCB has 3 sg entries:
+ * first points to skb-data area
+ * second points to first frag
+ * third points to next oal.
+ * OAL has 5 entries:
+ * 1 thru 4 point to frags
+ * fifth points to next oal.
+ */
+#define MAX_OAL_CNT ((MAX_SKB_FRAGS-1)/4 + 1)
+
+struct oal_entry {
+ u32 dma_lo;
+ u32 dma_hi;
+ u32 len;
+#define OAL_LAST_ENTRY 0x80000000 /* Last valid buffer in list. */
+#define OAL_CONT_ENTRY 0x40000000 /* points to an OAL. (continuation) */
+ u32 reserved;
+};
+
+struct oal {
+ struct oal_entry oal_entry[5];
+};
+
+struct map_list {
+ DECLARE_PCI_UNMAP_ADDR(mapaddr);
+ DECLARE_PCI_UNMAP_LEN(maplen);
+};
+
struct ql_tx_buf_cb {
struct sk_buff *skb;
struct ob_mac_iocb_req *queue_entry ;
- DECLARE_PCI_UNMAP_ADDR(mapaddr);
- DECLARE_PCI_UNMAP_LEN(maplen);
+ int seg_count;
+ struct oal *oal;
+ struct map_list map[MAX_SKB_FRAGS+1];
};
/* definitions for type field */
struct delayed_work reset_work;
struct delayed_work tx_timeout_work;
u32 max_frame_size;
+ u32 device_id;
};
#endif /* _QLA3XXX_H_ */
#define TBD 0
-typedef struct _XENA_dev_config {
+struct XENA_dev_config {
/* Convention: mHAL_XXX is mask, vHAL_XXX is value */
/* General Control-Status Registers */
u64 gpio_control;
#define GPIO_CTRL_GPIO_0 BIT(8)
u64 misc_control;
+#define FAULT_BEHAVIOUR BIT(0)
#define EXT_REQ_EN BIT(1)
#define MISC_LINK_STABILITY_PRD(val) vBIT(val,29,3)
#define SPI_CONTROL_DONE BIT(6)
u64 spi_data;
#define SPI_DATA_WRITE(data,len) vBIT(data,0,len)
-} XENA_dev_config_t;
+};
-#define XENA_REG_SPACE sizeof(XENA_dev_config_t)
+#define XENA_REG_SPACE sizeof(struct XENA_dev_config)
#define XENA_EEPROM_SPACE (0x01 << 11)
#endif /* _REGS_H */
#include "s2io.h"
#include "s2io-regs.h"
-#define DRV_VERSION "2.0.15.2"
+#define DRV_VERSION "2.0.16.1"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
static int rxd_size[4] = {32,48,48,64};
static int rxd_count[4] = {127,85,85,63};
-static inline int RXD_IS_UP2DT(RxD_t *rxdp)
+static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
{
int ret;
#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
#define PANIC 1
#define LOW 2
-static inline int rx_buffer_level(nic_t * sp, int rxb_size, int ring)
+static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
{
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
mac_control = &sp->mac_control;
if (rxb_size <= rxd_count[sp->rxd_mode])
static void s2io_vlan_rx_register(struct net_device *dev,
struct vlan_group *grp)
{
- nic_t *nic = dev->priv;
+ struct s2io_nic *nic = dev->priv;
unsigned long flags;
spin_lock_irqsave(&nic->tx_lock, flags);
/* Unregister the vlan */
static void s2io_vlan_rx_kill_vid(struct net_device *dev, unsigned long vid)
{
- nic_t *nic = dev->priv;
+ struct s2io_nic *nic = dev->priv;
unsigned long flags;
spin_lock_irqsave(&nic->tx_lock, flags);
* aggregation happens until we hit max IP pkt size(64K)
*/
S2IO_PARM_INT(lro_max_pkts, 0xFFFF);
-#ifndef CONFIG_S2IO_NAPI
S2IO_PARM_INT(indicate_max_pkts, 0);
-#endif
+
+S2IO_PARM_INT(napi, 1);
+S2IO_PARM_INT(ufo, 0);
static unsigned int tx_fifo_len[MAX_TX_FIFOS] =
{DEFAULT_FIFO_0_LEN, [1 ...(MAX_TX_FIFOS - 1)] = DEFAULT_FIFO_1_7_LEN};
u32 size;
void *tmp_v_addr, *tmp_v_addr_next;
dma_addr_t tmp_p_addr, tmp_p_addr_next;
- RxD_block_t *pre_rxd_blk = NULL;
- int i, j, blk_cnt, rx_sz, tx_sz;
+ struct RxD_block *pre_rxd_blk = NULL;
+ int i, j, blk_cnt;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
unsigned long tmp;
- buffAdd_t *ba;
+ struct buffAdd *ba;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
mac_control = &nic->mac_control;
return -EINVAL;
}
- lst_size = (sizeof(TxD_t) * config->max_txds);
- tx_sz = lst_size * size;
+ lst_size = (sizeof(struct TxD) * config->max_txds);
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
int fifo_len = config->tx_cfg[i].fifo_len;
- int list_holder_size = fifo_len * sizeof(list_info_hold_t);
+ int list_holder_size = fifo_len * sizeof(struct list_info_hold);
mac_control->fifos[i].list_info = kmalloc(list_holder_size,
GFP_KERNEL);
if (!mac_control->fifos[i].list_info) {
mac_control->rings[i].block_count;
}
if (nic->rxd_mode == RXD_MODE_1)
- size = (size * (sizeof(RxD1_t)));
+ size = (size * (sizeof(struct RxD1)));
else
- size = (size * (sizeof(RxD3_t)));
- rx_sz = size;
+ size = (size * (sizeof(struct RxD3)));
for (i = 0; i < config->rx_ring_num; i++) {
mac_control->rings[i].rx_curr_get_info.block_index = 0;
(rxd_count[nic->rxd_mode] + 1);
/* Allocating all the Rx blocks */
for (j = 0; j < blk_cnt; j++) {
- rx_block_info_t *rx_blocks;
+ struct rx_block_info *rx_blocks;
int l;
rx_blocks = &mac_control->rings[i].rx_blocks[j];
memset(tmp_v_addr, 0, size);
rx_blocks->block_virt_addr = tmp_v_addr;
rx_blocks->block_dma_addr = tmp_p_addr;
- rx_blocks->rxds = kmalloc(sizeof(rxd_info_t)*
+ rx_blocks->rxds = kmalloc(sizeof(struct rxd_info)*
rxd_count[nic->rxd_mode],
GFP_KERNEL);
+ if (!rx_blocks->rxds)
+ return -ENOMEM;
for (l=0; l<rxd_count[nic->rxd_mode];l++) {
rx_blocks->rxds[l].virt_addr =
rx_blocks->block_virt_addr +
mac_control->rings[i].rx_blocks[(j + 1) %
blk_cnt].block_dma_addr;
- pre_rxd_blk = (RxD_block_t *) tmp_v_addr;
+ pre_rxd_blk = (struct RxD_block *) tmp_v_addr;
pre_rxd_blk->reserved_2_pNext_RxD_block =
(unsigned long) tmp_v_addr_next;
pre_rxd_blk->pNext_RxD_Blk_physical =
blk_cnt = config->rx_cfg[i].num_rxd /
(rxd_count[nic->rxd_mode]+ 1);
mac_control->rings[i].ba =
- kmalloc((sizeof(buffAdd_t *) * blk_cnt),
+ kmalloc((sizeof(struct buffAdd *) * blk_cnt),
GFP_KERNEL);
if (!mac_control->rings[i].ba)
return -ENOMEM;
for (j = 0; j < blk_cnt; j++) {
int k = 0;
mac_control->rings[i].ba[j] =
- kmalloc((sizeof(buffAdd_t) *
+ kmalloc((sizeof(struct buffAdd) *
(rxd_count[nic->rxd_mode] + 1)),
GFP_KERNEL);
if (!mac_control->rings[i].ba[j])
}
/* Allocation and initialization of Statistics block */
- size = sizeof(StatInfo_t);
+ size = sizeof(struct stat_block);
mac_control->stats_mem = pci_alloc_consistent
(nic->pdev, size, &mac_control->stats_mem_phy);
mac_control->stats_mem_sz = size;
tmp_v_addr = mac_control->stats_mem;
- mac_control->stats_info = (StatInfo_t *) tmp_v_addr;
+ mac_control->stats_info = (struct stat_block *) tmp_v_addr;
memset(tmp_v_addr, 0, size);
DBG_PRINT(INIT_DBG, "%s:Ring Mem PHY: 0x%llx\n", dev->name,
(unsigned long long) tmp_p_addr);
int i, j, blk_cnt, size;
void *tmp_v_addr;
dma_addr_t tmp_p_addr;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
int lst_size, lst_per_page;
struct net_device *dev = nic->dev;
mac_control = &nic->mac_control;
config = &nic->config;
- lst_size = (sizeof(TxD_t) * config->max_txds);
+ lst_size = (sizeof(struct TxD) * config->max_txds);
lst_per_page = PAGE_SIZE / lst_size;
for (i = 0; i < config->tx_fifo_num; i++) {
if (!mac_control->rings[i].ba[j])
continue;
while (k != rxd_count[nic->rxd_mode]) {
- buffAdd_t *ba =
+ struct buffAdd *ba =
&mac_control->rings[i].ba[j][k];
kfree(ba->ba_0_org);
kfree(ba->ba_1_org);
* s2io_verify_pci_mode -
*/
-static int s2io_verify_pci_mode(nic_t *nic)
+static int s2io_verify_pci_mode(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
int mode;
/**
* s2io_print_pci_mode -
*/
-static int s2io_print_pci_mode(nic_t *nic)
+static int s2io_print_pci_mode(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
int mode;
struct config_param *config = &nic->config;
static int init_nic(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
struct net_device *dev = nic->dev;
register u64 val64 = 0;
void __iomem *add;
u32 time;
int i, j;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
int dtx_cnt = 0;
unsigned long long mem_share;
val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) |
TTI_DATA2_MEM_TX_UFC_B(0x20) |
- TTI_DATA2_MEM_TX_UFC_C(0x70) | TTI_DATA2_MEM_TX_UFC_D(0x80);
+ TTI_DATA2_MEM_TX_UFC_C(0x40) | TTI_DATA2_MEM_TX_UFC_D(0x80);
writeq(val64, &bar0->tti_data2_mem);
val64 = TTI_CMD_MEM_WE | TTI_CMD_MEM_STROBE_NEW_CMD;
* that does not start on an ADB to reduce disconnects.
*/
if (nic->device_type == XFRAME_II_DEVICE) {
- val64 = EXT_REQ_EN | MISC_LINK_STABILITY_PRD(3);
+ val64 = FAULT_BEHAVIOUR | EXT_REQ_EN |
+ MISC_LINK_STABILITY_PRD(3);
writeq(val64, &bar0->misc_control);
val64 = readq(&bar0->pic_control2);
val64 &= ~(BIT(13)|BIT(14)|BIT(15));
#define LINK_UP_DOWN_INTERRUPT 1
#define MAC_RMAC_ERR_TIMER 2
-static int s2io_link_fault_indication(nic_t *nic)
+static int s2io_link_fault_indication(struct s2io_nic *nic)
{
if (nic->intr_type != INTA)
return MAC_RMAC_ERR_TIMER;
static void en_dis_able_nic_intrs(struct s2io_nic *nic, u16 mask, int flag)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0, temp64 = 0;
/* Top level interrupt classification */
/* PIC Interrupts */
if ((mask & (TX_PIC_INTR | RX_PIC_INTR))) {
/* Enable PIC Intrs in the general intr mask register */
- val64 = TXPIC_INT_M | PIC_RX_INT_M;
+ val64 = TXPIC_INT_M;
if (flag == ENABLE_INTRS) {
temp64 = readq(&bar0->general_int_mask);
temp64 &= ~((u64) val64);
}
}
- /* DMA Interrupts */
- /* Enabling/Disabling Tx DMA interrupts */
- if (mask & TX_DMA_INTR) {
- /* Enable TxDMA Intrs in the general intr mask register */
- val64 = TXDMA_INT_M;
- if (flag == ENABLE_INTRS) {
- temp64 = readq(&bar0->general_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->general_int_mask);
- /*
- * Keep all interrupts other than PFC interrupt
- * and PCC interrupt disabled in DMA level.
- */
- val64 = DISABLE_ALL_INTRS & ~(TXDMA_PFC_INT_M |
- TXDMA_PCC_INT_M);
- writeq(val64, &bar0->txdma_int_mask);
- /*
- * Enable only the MISC error 1 interrupt in PFC block
- */
- val64 = DISABLE_ALL_INTRS & (~PFC_MISC_ERR_1);
- writeq(val64, &bar0->pfc_err_mask);
- /*
- * Enable only the FB_ECC error interrupt in PCC block
- */
- val64 = DISABLE_ALL_INTRS & (~PCC_FB_ECC_ERR);
- writeq(val64, &bar0->pcc_err_mask);
- } else if (flag == DISABLE_INTRS) {
- /*
- * Disable TxDMA Intrs in the general intr mask
- * register
- */
- writeq(DISABLE_ALL_INTRS, &bar0->txdma_int_mask);
- writeq(DISABLE_ALL_INTRS, &bar0->pfc_err_mask);
- temp64 = readq(&bar0->general_int_mask);
- val64 |= temp64;
- writeq(val64, &bar0->general_int_mask);
- }
- }
-
- /* Enabling/Disabling Rx DMA interrupts */
- if (mask & RX_DMA_INTR) {
- /* Enable RxDMA Intrs in the general intr mask register */
- val64 = RXDMA_INT_M;
- if (flag == ENABLE_INTRS) {
- temp64 = readq(&bar0->general_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->general_int_mask);
- /*
- * All RxDMA block interrupts are disabled for now
- * TODO
- */
- writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
- } else if (flag == DISABLE_INTRS) {
- /*
- * Disable RxDMA Intrs in the general intr mask
- * register
- */
- writeq(DISABLE_ALL_INTRS, &bar0->rxdma_int_mask);
- temp64 = readq(&bar0->general_int_mask);
- val64 |= temp64;
- writeq(val64, &bar0->general_int_mask);
- }
- }
-
/* MAC Interrupts */
/* Enabling/Disabling MAC interrupts */
if (mask & (TX_MAC_INTR | RX_MAC_INTR)) {
}
}
- /* XGXS Interrupts */
- if (mask & (TX_XGXS_INTR | RX_XGXS_INTR)) {
- val64 = TXXGXS_INT_M | RXXGXS_INT_M;
- if (flag == ENABLE_INTRS) {
- temp64 = readq(&bar0->general_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->general_int_mask);
- /*
- * All XGXS block error interrupts are disabled for now
- * TODO
- */
- writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
- } else if (flag == DISABLE_INTRS) {
- /*
- * Disable MC Intrs in the general intr mask register
- */
- writeq(DISABLE_ALL_INTRS, &bar0->xgxs_int_mask);
- temp64 = readq(&bar0->general_int_mask);
- val64 |= temp64;
- writeq(val64, &bar0->general_int_mask);
- }
- }
-
- /* Memory Controller(MC) interrupts */
- if (mask & MC_INTR) {
- val64 = MC_INT_M;
- if (flag == ENABLE_INTRS) {
- temp64 = readq(&bar0->general_int_mask);
- temp64 &= ~((u64) val64);
- writeq(temp64, &bar0->general_int_mask);
- /*
- * Enable all MC Intrs.
- */
- writeq(0x0, &bar0->mc_int_mask);
- writeq(0x0, &bar0->mc_err_mask);
- } else if (flag == DISABLE_INTRS) {
- /*
- * Disable MC Intrs in the general intr mask register
- */
- writeq(DISABLE_ALL_INTRS, &bar0->mc_int_mask);
- temp64 = readq(&bar0->general_int_mask);
- val64 |= temp64;
- writeq(val64, &bar0->general_int_mask);
- }
- }
-
-
/* Tx traffic interrupts */
if (mask & TX_TRAFFIC_INTR) {
val64 = TXTRAFFIC_INT_M;
}
}
-static int check_prc_pcc_state(u64 val64, int flag, int rev_id, int herc)
+/**
+ * verify_pcc_quiescent- Checks for PCC quiescent state
+ * Return: 1 If PCC is quiescence
+ * 0 If PCC is not quiescence
+ */
+static int verify_pcc_quiescent(struct s2io_nic *sp, int flag)
{
- int ret = 0;
+ int ret = 0, herc;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ u64 val64 = readq(&bar0->adapter_status);
+
+ herc = (sp->device_type == XFRAME_II_DEVICE);
if (flag == FALSE) {
- if ((!herc && (rev_id >= 4)) || herc) {
- if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
+ if (!(val64 & ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
- }
- }else {
- if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ } else {
+ if (!(val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
ret = 1;
- }
}
} else {
- if ((!herc && (rev_id >= 4)) || herc) {
+ if ((!herc && (get_xena_rev_id(sp->pdev) >= 4)) || herc) {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_IDLE) ==
- ADAPTER_STATUS_RMAC_PCC_IDLE) &&
- (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+ ADAPTER_STATUS_RMAC_PCC_IDLE))
ret = 1;
- }
} else {
if (((val64 & ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) ==
- ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE) &&
- (!(val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ||
- ((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
- ADAPTER_STATUS_RC_PRC_QUIESCENT))) {
+ ADAPTER_STATUS_RMAC_PCC_FOUR_IDLE))
ret = 1;
- }
}
}
}
/**
* verify_xena_quiescence - Checks whether the H/W is ready
- * @val64 : Value read from adapter status register.
- * @flag : indicates if the adapter enable bit was ever written once
- * before.
* Description: Returns whether the H/W is ready to go or not. Depending
* on whether adapter enable bit was written or not the comparison
* differs and the calling function passes the input argument flag to
* 0 If Xena is not quiescence
*/
-static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag)
+static int verify_xena_quiescence(struct s2io_nic *sp)
{
- int ret = 0, herc;
- u64 tmp64 = ~((u64) val64);
- int rev_id = get_xena_rev_id(sp->pdev);
+ int mode;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
+ u64 val64 = readq(&bar0->adapter_status);
+ mode = s2io_verify_pci_mode(sp);
- herc = (sp->device_type == XFRAME_II_DEVICE);
- if (!
- (tmp64 &
- (ADAPTER_STATUS_TDMA_READY | ADAPTER_STATUS_RDMA_READY |
- ADAPTER_STATUS_PFC_READY | ADAPTER_STATUS_TMAC_BUF_EMPTY |
- ADAPTER_STATUS_PIC_QUIESCENT | ADAPTER_STATUS_MC_DRAM_READY |
- ADAPTER_STATUS_MC_QUEUES_READY | ADAPTER_STATUS_M_PLL_LOCK |
- ADAPTER_STATUS_P_PLL_LOCK))) {
- ret = check_prc_pcc_state(val64, flag, rev_id, herc);
+ if (!(val64 & ADAPTER_STATUS_TDMA_READY)) {
+ DBG_PRINT(ERR_DBG, "%s", "TDMA is not ready!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_RDMA_READY)) {
+ DBG_PRINT(ERR_DBG, "%s", "RDMA is not ready!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_PFC_READY)) {
+ DBG_PRINT(ERR_DBG, "%s", "PFC is not ready!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_TMAC_BUF_EMPTY)) {
+ DBG_PRINT(ERR_DBG, "%s", "TMAC BUF is not empty!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_PIC_QUIESCENT)) {
+ DBG_PRINT(ERR_DBG, "%s", "PIC is not QUIESCENT!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_MC_DRAM_READY)) {
+ DBG_PRINT(ERR_DBG, "%s", "MC_DRAM is not ready!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_MC_QUEUES_READY)) {
+ DBG_PRINT(ERR_DBG, "%s", "MC_QUEUES is not ready!");
+ return 0;
+ }
+ if (!(val64 & ADAPTER_STATUS_M_PLL_LOCK)) {
+ DBG_PRINT(ERR_DBG, "%s", "M_PLL is not locked!");
+ return 0;
}
- return ret;
+ /*
+ * In PCI 33 mode, the P_PLL is not used, and therefore,
+ * the the P_PLL_LOCK bit in the adapter_status register will
+ * not be asserted.
+ */
+ if (!(val64 & ADAPTER_STATUS_P_PLL_LOCK) &&
+ sp->device_type == XFRAME_II_DEVICE && mode !=
+ PCI_MODE_PCI_33) {
+ DBG_PRINT(ERR_DBG, "%s", "P_PLL is not locked!");
+ return 0;
+ }
+ if (!((val64 & ADAPTER_STATUS_RC_PRC_QUIESCENT) ==
+ ADAPTER_STATUS_RC_PRC_QUIESCENT)) {
+ DBG_PRINT(ERR_DBG, "%s", "RC_PRC is not QUIESCENT!");
+ return 0;
+ }
+ return 1;
}
/**
*
*/
-static void fix_mac_address(nic_t * sp)
+static void fix_mac_address(struct s2io_nic * sp)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
int i = 0;
static int start_nic(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
struct net_device *dev = nic->dev;
register u64 val64 = 0;
u16 subid, i;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
mac_control = &nic->mac_control;
* it.
*/
val64 = readq(&bar0->adapter_status);
- if (!verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
+ if (!verify_xena_quiescence(nic)) {
DBG_PRINT(ERR_DBG, "%s: device is not ready, ", dev->name);
DBG_PRINT(ERR_DBG, "Adapter status reads: 0x%llx\n",
(unsigned long long) val64);
/**
* s2io_txdl_getskb - Get the skb from txdl, unmap and return skb
*/
-static struct sk_buff *s2io_txdl_getskb(fifo_info_t *fifo_data, TxD_t *txdlp, int get_off)
+static struct sk_buff *s2io_txdl_getskb(struct fifo_info *fifo_data, struct \
+ TxD *txdlp, int get_off)
{
- nic_t *nic = fifo_data->nic;
+ struct s2io_nic *nic = fifo_data->nic;
struct sk_buff *skb;
- TxD_t *txds;
+ struct TxD *txds;
u16 j, frg_cnt;
txds = txdlp;
skb = (struct sk_buff *) ((unsigned long)
txds->Host_Control);
if (!skb) {
- memset(txdlp, 0, (sizeof(TxD_t) * fifo_data->max_txds));
+ memset(txdlp, 0, (sizeof(struct TxD) * fifo_data->max_txds));
return NULL;
}
pci_unmap_single(nic->pdev, (dma_addr_t)
frag->size, PCI_DMA_TODEVICE);
}
}
- memset(txdlp,0, (sizeof(TxD_t) * fifo_data->max_txds));
+ memset(txdlp,0, (sizeof(struct TxD) * fifo_data->max_txds));
return(skb);
}
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
- TxD_t *txdp;
+ struct TxD *txdp;
int i, j;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
int cnt = 0;
for (i = 0; i < config->tx_fifo_num; i++) {
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
- txdp = (TxD_t *) mac_control->fifos[i].list_info[j].
+ txdp = (struct TxD *) mac_control->fifos[i].list_info[j].
list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
if (skb) {
static void stop_nic(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0;
u16 interruptible;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
mac_control = &nic->mac_control;
writeq(val64, &bar0->adapter_control);
}
-static int fill_rxd_3buf(nic_t *nic, RxD_t *rxdp, struct sk_buff *skb)
+static int fill_rxd_3buf(struct s2io_nic *nic, struct RxD_t *rxdp, struct \
+ sk_buff *skb)
{
struct net_device *dev = nic->dev;
struct sk_buff *frag_list;
void *tmp;
/* Buffer-1 receives L3/L4 headers */
- ((RxD3_t*)rxdp)->Buffer1_ptr = pci_map_single
+ ((struct RxD3*)rxdp)->Buffer1_ptr = pci_map_single
(nic->pdev, skb->data, l3l4hdr_size + 4,
PCI_DMA_FROMDEVICE);
return -ENOMEM ;
}
frag_list = skb_shinfo(skb)->frag_list;
+ skb->truesize += frag_list->truesize;
frag_list->next = NULL;
tmp = (void *)ALIGN((long)frag_list->data, ALIGN_SIZE + 1);
frag_list->data = tmp;
frag_list->tail = tmp;
/* Buffer-2 receives L4 data payload */
- ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single(nic->pdev,
+ ((struct RxD3*)rxdp)->Buffer2_ptr = pci_map_single(nic->pdev,
frag_list->data, dev->mtu,
PCI_DMA_FROMDEVICE);
rxdp->Control_2 |= SET_BUFFER1_SIZE_3(l3l4hdr_size + 4);
{
struct net_device *dev = nic->dev;
struct sk_buff *skb;
- RxD_t *rxdp;
+ struct RxD_t *rxdp;
int off, off1, size, block_no, block_no1;
u32 alloc_tab = 0;
u32 alloc_cnt;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
u64 tmp;
- buffAdd_t *ba;
-#ifndef CONFIG_S2IO_NAPI
+ struct buffAdd *ba;
unsigned long flags;
-#endif
- RxD_t *first_rxdp = NULL;
+ struct RxD_t *first_rxdp = NULL;
mac_control = &nic->mac_control;
config = &nic->config;
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
-#ifndef CONFIG_S2IO_NAPI
- spin_lock_irqsave(&nic->put_lock, flags);
- mac_control->rings[ring_no].put_pos =
- (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
- spin_unlock_irqrestore(&nic->put_lock, flags);
-#endif
+ if(!napi) {
+ spin_lock_irqsave(&nic->put_lock, flags);
+ mac_control->rings[ring_no].put_pos =
+ (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
+ spin_unlock_irqrestore(&nic->put_lock, flags);
+ } else {
+ mac_control->rings[ring_no].put_pos =
+ (block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
+ }
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
((nic->rxd_mode >= RXD_MODE_3A) &&
(rxdp->Control_2 & BIT(0)))) {
}
if (nic->rxd_mode == RXD_MODE_1) {
/* 1 buffer mode - normal operation mode */
- memset(rxdp, 0, sizeof(RxD1_t));
+ memset(rxdp, 0, sizeof(struct RxD1));
skb_reserve(skb, NET_IP_ALIGN);
- ((RxD1_t*)rxdp)->Buffer0_ptr = pci_map_single
+ ((struct RxD1*)rxdp)->Buffer0_ptr = pci_map_single
(nic->pdev, skb->data, size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
rxdp->Control_2 = SET_BUFFER0_SIZE_1(size - NET_IP_ALIGN);
* payload
*/
- memset(rxdp, 0, sizeof(RxD3_t));
+ memset(rxdp, 0, sizeof(struct RxD3));
ba = &mac_control->rings[ring_no].ba[block_no][off];
skb_reserve(skb, BUF0_LEN);
tmp = (u64)(unsigned long) skb->data;
skb->data = (void *) (unsigned long)tmp;
skb->tail = (void *) (unsigned long)tmp;
- if (!(((RxD3_t*)rxdp)->Buffer0_ptr))
- ((RxD3_t*)rxdp)->Buffer0_ptr =
+ if (!(((struct RxD3*)rxdp)->Buffer0_ptr))
+ ((struct RxD3*)rxdp)->Buffer0_ptr =
pci_map_single(nic->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
else
pci_dma_sync_single_for_device(nic->pdev,
- (dma_addr_t) ((RxD3_t*)rxdp)->Buffer0_ptr,
+ (dma_addr_t) ((struct RxD3*)rxdp)->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN);
if (nic->rxd_mode == RXD_MODE_3B) {
* Buffer2 will have L3/L4 header plus
* L4 payload
*/
- ((RxD3_t*)rxdp)->Buffer2_ptr = pci_map_single
+ ((struct RxD3*)rxdp)->Buffer2_ptr = pci_map_single
(nic->pdev, skb->data, dev->mtu + 4,
PCI_DMA_FROMDEVICE);
/* Buffer-1 will be dummy buffer. Not used */
- if (!(((RxD3_t*)rxdp)->Buffer1_ptr)) {
- ((RxD3_t*)rxdp)->Buffer1_ptr =
+ if (!(((struct RxD3*)rxdp)->Buffer1_ptr)) {
+ ((struct RxD3*)rxdp)->Buffer1_ptr =
pci_map_single(nic->pdev,
ba->ba_1, BUF1_LEN,
PCI_DMA_FROMDEVICE);
struct net_device *dev = sp->dev;
int j;
struct sk_buff *skb;
- RxD_t *rxdp;
- mac_info_t *mac_control;
- buffAdd_t *ba;
+ struct RxD_t *rxdp;
+ struct mac_info *mac_control;
+ struct buffAdd *ba;
mac_control = &sp->mac_control;
for (j = 0 ; j < rxd_count[sp->rxd_mode]; j++) {
}
if (sp->rxd_mode == RXD_MODE_1) {
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD1_t*)rxdp)->Buffer0_ptr,
+ ((struct RxD1*)rxdp)->Buffer0_ptr,
dev->mtu +
HEADER_ETHERNET_II_802_3_SIZE
+ HEADER_802_2_SIZE +
HEADER_SNAP_SIZE,
PCI_DMA_FROMDEVICE);
- memset(rxdp, 0, sizeof(RxD1_t));
+ memset(rxdp, 0, sizeof(struct RxD1));
} else if(sp->rxd_mode == RXD_MODE_3B) {
ba = &mac_control->rings[ring_no].
ba[blk][j];
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer0_ptr,
+ ((struct RxD3*)rxdp)->Buffer0_ptr,
BUF0_LEN,
PCI_DMA_FROMDEVICE);
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer1_ptr,
+ ((struct RxD3*)rxdp)->Buffer1_ptr,
BUF1_LEN,
PCI_DMA_FROMDEVICE);
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer2_ptr,
+ ((struct RxD3*)rxdp)->Buffer2_ptr,
dev->mtu + 4,
PCI_DMA_FROMDEVICE);
- memset(rxdp, 0, sizeof(RxD3_t));
+ memset(rxdp, 0, sizeof(struct RxD3));
} else {
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN,
+ ((struct RxD3*)rxdp)->Buffer0_ptr, BUF0_LEN,
PCI_DMA_FROMDEVICE);
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer1_ptr,
+ ((struct RxD3*)rxdp)->Buffer1_ptr,
l3l4hdr_size + 4,
PCI_DMA_FROMDEVICE);
pci_unmap_single(sp->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer2_ptr, dev->mtu,
+ ((struct RxD3*)rxdp)->Buffer2_ptr, dev->mtu,
PCI_DMA_FROMDEVICE);
- memset(rxdp, 0, sizeof(RxD3_t));
+ memset(rxdp, 0, sizeof(struct RxD3));
}
dev_kfree_skb(skb);
atomic_dec(&sp->rx_bufs_left[ring_no]);
{
struct net_device *dev = sp->dev;
int i, blk = 0, buf_cnt = 0;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
mac_control = &sp->mac_control;
* 0 on success and 1 if there are No Rx packets to be processed.
*/
-#if defined(CONFIG_S2IO_NAPI)
static int s2io_poll(struct net_device *dev, int *budget)
{
- nic_t *nic = dev->priv;
+ struct s2io_nic *nic = dev->priv;
int pkt_cnt = 0, org_pkts_to_process;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
- u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
int i;
atomic_inc(&nic->isr_cnt);
nic->pkts_to_process = dev->quota;
org_pkts_to_process = nic->pkts_to_process;
- writeq(val64, &bar0->rx_traffic_int);
- val64 = readl(&bar0->rx_traffic_int);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+ readl(&bar0->rx_traffic_int);
for (i = 0; i < config->rx_ring_num; i++) {
rx_intr_handler(&mac_control->rings[i]);
}
/* Re enable the Rx interrupts. */
writeq(0x0, &bar0->rx_traffic_mask);
- val64 = readl(&bar0->rx_traffic_mask);
+ readl(&bar0->rx_traffic_mask);
atomic_dec(&nic->isr_cnt);
return 0;
atomic_dec(&nic->isr_cnt);
return 1;
}
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
/**
*/
static void s2io_netpoll(struct net_device *dev)
{
- nic_t *nic = dev->priv;
- mac_info_t *mac_control;
+ struct s2io_nic *nic = dev->priv;
+ struct mac_info *mac_control;
struct config_param *config;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64 = 0xFFFFFFFFFFFFFFFFULL;
int i;
* Return Value:
* NONE.
*/
-static void rx_intr_handler(ring_info_t *ring_data)
+static void rx_intr_handler(struct ring_info *ring_data)
{
- nic_t *nic = ring_data->nic;
+ struct s2io_nic *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
int get_block, put_block, put_offset;
- rx_curr_get_info_t get_info, put_info;
- RxD_t *rxdp;
+ struct rx_curr_get_info get_info, put_info;
+ struct RxD_t *rxdp;
struct sk_buff *skb;
-#ifndef CONFIG_S2IO_NAPI
int pkt_cnt = 0;
-#endif
int i;
spin_lock(&nic->rx_lock);
get_info = ring_data->rx_curr_get_info;
get_block = get_info.block_index;
- put_info = ring_data->rx_curr_put_info;
+ memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
put_block = put_info.block_index;
rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
-#ifndef CONFIG_S2IO_NAPI
- spin_lock(&nic->put_lock);
- put_offset = ring_data->put_pos;
- spin_unlock(&nic->put_lock);
-#else
- put_offset = (put_block * (rxd_count[nic->rxd_mode] + 1)) +
- put_info.offset;
-#endif
+ if (!napi) {
+ spin_lock(&nic->put_lock);
+ put_offset = ring_data->put_pos;
+ spin_unlock(&nic->put_lock);
+ } else
+ put_offset = ring_data->put_pos;
+
while (RXD_IS_UP2DT(rxdp)) {
- /* If your are next to put index then it's FIFO full condition */
+ /*
+ * If your are next to put index then it's
+ * FIFO full condition
+ */
if ((get_block == put_block) &&
(get_info.offset + 1) == put_info.offset) {
DBG_PRINT(INTR_DBG, "%s: Ring Full\n",dev->name);
}
if (nic->rxd_mode == RXD_MODE_1) {
pci_unmap_single(nic->pdev, (dma_addr_t)
- ((RxD1_t*)rxdp)->Buffer0_ptr,
+ ((struct RxD1*)rxdp)->Buffer0_ptr,
dev->mtu +
HEADER_ETHERNET_II_802_3_SIZE +
HEADER_802_2_SIZE +
PCI_DMA_FROMDEVICE);
} else if (nic->rxd_mode == RXD_MODE_3B) {
pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer0_ptr,
+ ((struct RxD3*)rxdp)->Buffer0_ptr,
BUF0_LEN, PCI_DMA_FROMDEVICE);
pci_unmap_single(nic->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer2_ptr,
+ ((struct RxD3*)rxdp)->Buffer2_ptr,
dev->mtu + 4,
PCI_DMA_FROMDEVICE);
} else {
pci_dma_sync_single_for_cpu(nic->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer0_ptr, BUF0_LEN,
+ ((struct RxD3*)rxdp)->Buffer0_ptr, BUF0_LEN,
PCI_DMA_FROMDEVICE);
pci_unmap_single(nic->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer1_ptr,
+ ((struct RxD3*)rxdp)->Buffer1_ptr,
l3l4hdr_size + 4,
PCI_DMA_FROMDEVICE);
pci_unmap_single(nic->pdev, (dma_addr_t)
- ((RxD3_t*)rxdp)->Buffer2_ptr,
+ ((struct RxD3*)rxdp)->Buffer2_ptr,
dev->mtu, PCI_DMA_FROMDEVICE);
}
prefetch(skb->data);
rxdp = ring_data->rx_blocks[get_block].block_virt_addr;
}
-#ifdef CONFIG_S2IO_NAPI
nic->pkts_to_process -= 1;
- if (!nic->pkts_to_process)
+ if ((napi) && (!nic->pkts_to_process))
break;
-#else
pkt_cnt++;
if ((indicate_max_pkts) && (pkt_cnt > indicate_max_pkts))
break;
-#endif
}
if (nic->lro) {
/* Clear all LRO sessions before exiting */
for (i=0; i<MAX_LRO_SESSIONS; i++) {
- lro_t *lro = &nic->lro0_n[i];
+ struct lro *lro = &nic->lro0_n[i];
if (lro->in_use) {
update_L3L4_header(nic, lro);
queue_rx_frame(lro->parent);
* NONE
*/
-static void tx_intr_handler(fifo_info_t *fifo_data)
+static void tx_intr_handler(struct fifo_info *fifo_data)
{
- nic_t *nic = fifo_data->nic;
+ struct s2io_nic *nic = fifo_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
- tx_curr_get_info_t get_info, put_info;
+ struct tx_curr_get_info get_info, put_info;
struct sk_buff *skb;
- TxD_t *txdlp;
+ struct TxD *txdlp;
get_info = fifo_data->tx_curr_get_info;
- put_info = fifo_data->tx_curr_put_info;
- txdlp = (TxD_t *) fifo_data->list_info[get_info.offset].
+ memcpy(&put_info, &fifo_data->tx_curr_put_info, sizeof(put_info));
+ txdlp = (struct TxD *) fifo_data->list_info[get_info.offset].
list_virt_addr;
while ((!(txdlp->Control_1 & TXD_LIST_OWN_XENA)) &&
(get_info.offset != put_info.offset) &&
}
if ((err >> 48) == 0xA) {
DBG_PRINT(TX_DBG, "TxD returned due \
-to loss of link\n");
+ to loss of link\n");
}
else {
- DBG_PRINT(ERR_DBG, "***TxD error \
-%llx\n", err);
+ DBG_PRINT(ERR_DBG, "***TxD error %llx\n", err);
}
}
get_info.offset++;
if (get_info.offset == get_info.fifo_len + 1)
get_info.offset = 0;
- txdlp = (TxD_t *) fifo_data->list_info
+ txdlp = (struct TxD *) fifo_data->list_info
[get_info.offset].list_virt_addr;
fifo_data->tx_curr_get_info.offset =
get_info.offset;
static void s2io_mdio_write(u32 mmd_type, u64 addr, u16 value, struct net_device *dev)
{
u64 val64 = 0x0;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
//address transaction
val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
{
u64 val64 = 0x0;
u64 rval64 = 0x0;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
/* address transaction */
val64 = val64 | MDIO_MMD_INDX_ADDR(addr)
u64 val64 = 0x0;
u64 addr = 0x0;
- nic_t *sp = dev->priv;
- StatInfo_t *stat_info = sp->mac_control.stats_info;
+ struct s2io_nic *sp = dev->priv;
+ struct stat_block *stat_info = sp->mac_control.stats_info;
/* Check the communication with the MDIO slave */
addr = 0x0000;
static void alarm_intr_handler(struct s2io_nic *nic)
{
struct net_device *dev = (struct net_device *) nic->dev;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64 = 0, err_reg = 0;
u64 cnt;
int i;
+ if (atomic_read(&nic->card_state) == CARD_DOWN)
+ return;
nic->mac_control.stats_info->sw_stat.ring_full_cnt = 0;
/* Handling the XPAK counters update */
if(nic->mac_control.stats_info->xpak_stat.xpak_timer_count < 72000) {
}
return ret;
}
+/*
+ * check_pci_device_id - Checks if the device id is supported
+ * @id : device id
+ * Description: Function to check if the pci device id is supported by driver.
+ * Return value: Actual device id if supported else PCI_ANY_ID
+ */
+static u16 check_pci_device_id(u16 id)
+{
+ switch (id) {
+ case PCI_DEVICE_ID_HERC_WIN:
+ case PCI_DEVICE_ID_HERC_UNI:
+ return XFRAME_II_DEVICE;
+ case PCI_DEVICE_ID_S2IO_UNI:
+ case PCI_DEVICE_ID_S2IO_WIN:
+ return XFRAME_I_DEVICE;
+ default:
+ return PCI_ANY_ID;
+ }
+}
/**
* s2io_reset - Resets the card.
* void.
*/
-static void s2io_reset(nic_t * sp)
+static void s2io_reset(struct s2io_nic * sp)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
u16 subid, pci_cmd;
+ int i;
+ u16 val16;
+ DBG_PRINT(INIT_DBG,"%s - Resetting XFrame card %s\n",
+ __FUNCTION__, sp->dev->name);
/* Back up the PCI-X CMD reg, dont want to lose MMRBC, OST settings */
pci_read_config_word(sp->pdev, PCIX_COMMAND_REGISTER, &(pci_cmd));
+ if (sp->device_type == XFRAME_II_DEVICE) {
+ int ret;
+ ret = pci_set_power_state(sp->pdev, 3);
+ if (!ret)
+ ret = pci_set_power_state(sp->pdev, 0);
+ else {
+ DBG_PRINT(ERR_DBG,"%s PME based SW_Reset failed!\n",
+ __FUNCTION__);
+ goto old_way;
+ }
+ msleep(20);
+ goto new_way;
+ }
+old_way:
val64 = SW_RESET_ALL;
writeq(val64, &bar0->sw_reset);
-
- /*
- * At this stage, if the PCI write is indeed completed, the
- * card is reset and so is the PCI Config space of the device.
- * So a read cannot be issued at this stage on any of the
- * registers to ensure the write into "sw_reset" register
- * has gone through.
- * Question: Is there any system call that will explicitly force
- * all the write commands still pending on the bus to be pushed
- * through?
- * As of now I'am just giving a 250ms delay and hoping that the
- * PCI write to sw_reset register is done by this time.
- */
- msleep(250);
+new_way:
if (strstr(sp->product_name, "CX4")) {
msleep(750);
}
+ msleep(250);
+ for (i = 0; i < S2IO_MAX_PCI_CONFIG_SPACE_REINIT; i++) {
- /* Restore the PCI state saved during initialization. */
- pci_restore_state(sp->pdev);
- pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER,
- pci_cmd);
- s2io_init_pci(sp);
+ /* Restore the PCI state saved during initialization. */
+ pci_restore_state(sp->pdev);
+ pci_read_config_word(sp->pdev, 0x2, &val16);
+ if (check_pci_device_id(val16) != (u16)PCI_ANY_ID)
+ break;
+ msleep(200);
+ }
- msleep(250);
+ if (check_pci_device_id(val16) == (u16)PCI_ANY_ID) {
+ DBG_PRINT(ERR_DBG,"%s SW_Reset failed!\n", __FUNCTION__);
+ }
+
+ pci_write_config_word(sp->pdev, PCIX_COMMAND_REGISTER, pci_cmd);
+
+ s2io_init_pci(sp);
/* Set swapper to enable I/O register access */
s2io_set_swapper(sp);
* SUCCESS on success and FAILURE on failure.
*/
-static int s2io_set_swapper(nic_t * sp)
+static int s2io_set_swapper(struct s2io_nic * sp)
{
struct net_device *dev = sp->dev;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64, valt, valr;
/*
return SUCCESS;
}
-static int wait_for_msix_trans(nic_t *nic, int i)
+static int wait_for_msix_trans(struct s2io_nic *nic, int i)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
int ret = 0, cnt = 0;
return ret;
}
-static void restore_xmsi_data(nic_t *nic)
+static void restore_xmsi_data(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64;
int i;
}
}
-static void store_xmsi_data(nic_t *nic)
+static void store_xmsi_data(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 val64, addr, data;
int i;
}
}
-int s2io_enable_msi(nic_t *nic)
+int s2io_enable_msi(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u16 msi_ctrl, msg_val;
struct config_param *config = &nic->config;
struct net_device *dev = nic->dev;
return 0;
}
-static int s2io_enable_msi_x(nic_t *nic)
+static int s2io_enable_msi_x(struct s2io_nic *nic)
{
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
u64 tx_mat, rx_mat;
u16 msi_control; /* Temp variable */
int ret, i, j, msix_indx = 1;
static int s2io_open(struct net_device *dev)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
int err = 0;
/*
static int s2io_close(struct net_device *dev)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
flush_scheduled_work();
netif_stop_queue(dev);
static int s2io_xmit(struct sk_buff *skb, struct net_device *dev)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
u16 frg_cnt, frg_len, i, queue, queue_len, put_off, get_off;
register u64 val64;
- TxD_t *txdp;
- TxFIFO_element_t __iomem *tx_fifo;
+ struct TxD *txdp;
+ struct TxFIFO_element __iomem *tx_fifo;
unsigned long flags;
u16 vlan_tag = 0;
int vlan_priority = 0;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
int offload_type;
put_off = (u16) mac_control->fifos[queue].tx_curr_put_info.offset;
get_off = (u16) mac_control->fifos[queue].tx_curr_get_info.offset;
- txdp = (TxD_t *) mac_control->fifos[queue].list_info[put_off].
+ txdp = (struct TxD *) mac_control->fifos[queue].list_info[put_off].
list_virt_addr;
queue_len = mac_control->fifos[queue].tx_curr_put_info.fifo_len + 1;
}
offload_type = s2io_offload_type(skb);
-#ifdef NETIF_F_TSO
if (offload_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)) {
txdp->Control_1 |= TXD_TCP_LSO_EN;
txdp->Control_1 |= TXD_TCP_LSO_MSS(s2io_tcp_mss(skb));
}
-#endif
if (skb->ip_summed == CHECKSUM_PARTIAL) {
txdp->Control_2 |=
(TXD_TX_CKO_IPV4_EN | TXD_TX_CKO_TCP_EN |
static void
s2io_alarm_handle(unsigned long data)
{
- nic_t *sp = (nic_t *)data;
+ struct s2io_nic *sp = (struct s2io_nic *)data;
alarm_intr_handler(sp);
mod_timer(&sp->alarm_timer, jiffies + HZ / 2);
}
-static int s2io_chk_rx_buffers(nic_t *sp, int rng_n)
+static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
{
int rxb_size, level;
static irqreturn_t s2io_msi_handle(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
int i;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
atomic_inc(&sp->isr_cnt);
static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id)
{
- ring_info_t *ring = (ring_info_t *)dev_id;
- nic_t *sp = ring->nic;
+ struct ring_info *ring = (struct ring_info *)dev_id;
+ struct s2io_nic *sp = ring->nic;
atomic_inc(&sp->isr_cnt);
static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id)
{
- fifo_info_t *fifo = (fifo_info_t *)dev_id;
- nic_t *sp = fifo->nic;
+ struct fifo_info *fifo = (struct fifo_info *)dev_id;
+ struct s2io_nic *sp = fifo->nic;
atomic_inc(&sp->isr_cnt);
tx_intr_handler(fifo);
atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
-static void s2io_txpic_intr_handle(nic_t *sp)
+static void s2io_txpic_intr_handle(struct s2io_nic *sp)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
val64 = readq(&bar0->pic_int_status);
}
else if (val64 & GPIO_INT_REG_LINK_UP) {
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(sp, val64,
- sp->device_enabled_once)) {
/* Enable Adapter */
- val64 = readq(&bar0->adapter_control);
- val64 |= ADAPTER_CNTL_EN;
- writeq(val64, &bar0->adapter_control);
- val64 |= ADAPTER_LED_ON;
- writeq(val64, &bar0->adapter_control);
- if (!sp->device_enabled_once)
- sp->device_enabled_once = 1;
+ val64 = readq(&bar0->adapter_control);
+ val64 |= ADAPTER_CNTL_EN;
+ writeq(val64, &bar0->adapter_control);
+ val64 |= ADAPTER_LED_ON;
+ writeq(val64, &bar0->adapter_control);
+ if (!sp->device_enabled_once)
+ sp->device_enabled_once = 1;
- s2io_link(sp, LINK_UP);
- /*
- * unmask link down interrupt and mask link-up
- * intr
- */
- val64 = readq(&bar0->gpio_int_mask);
- val64 &= ~GPIO_INT_MASK_LINK_DOWN;
- val64 |= GPIO_INT_MASK_LINK_UP;
- writeq(val64, &bar0->gpio_int_mask);
+ s2io_link(sp, LINK_UP);
+ /*
+ * unmask link down interrupt and mask link-up
+ * intr
+ */
+ val64 = readq(&bar0->gpio_int_mask);
+ val64 &= ~GPIO_INT_MASK_LINK_DOWN;
+ val64 |= GPIO_INT_MASK_LINK_UP;
+ writeq(val64, &bar0->gpio_int_mask);
- }
}else if (val64 & GPIO_INT_REG_LINK_DOWN) {
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(sp, val64,
- sp->device_enabled_once)) {
- s2io_link(sp, LINK_DOWN);
- /* Link is down so unmaks link up interrupt */
- val64 = readq(&bar0->gpio_int_mask);
- val64 &= ~GPIO_INT_MASK_LINK_UP;
- val64 |= GPIO_INT_MASK_LINK_DOWN;
- writeq(val64, &bar0->gpio_int_mask);
- }
+ s2io_link(sp, LINK_DOWN);
+ /* Link is down so unmaks link up interrupt */
+ val64 = readq(&bar0->gpio_int_mask);
+ val64 &= ~GPIO_INT_MASK_LINK_UP;
+ val64 |= GPIO_INT_MASK_LINK_DOWN;
+ writeq(val64, &bar0->gpio_int_mask);
}
}
val64 = readq(&bar0->gpio_int_mask);
static irqreturn_t s2io_isr(int irq, void *dev_id)
{
struct net_device *dev = (struct net_device *) dev_id;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
int i;
- u64 reason = 0, val64, org_mask;
- mac_info_t *mac_control;
+ u64 reason = 0;
+ struct mac_info *mac_control;
struct config_param *config;
atomic_inc(&sp->isr_cnt);
reason = readq(&bar0->general_int_status);
if (!reason) {
- /* The interrupt was not raised by Xena. */
+ /* The interrupt was not raised by us. */
+ atomic_dec(&sp->isr_cnt);
+ return IRQ_NONE;
+ }
+ else if (unlikely(reason == S2IO_MINUS_ONE) ) {
+ /* Disable device and get out */
atomic_dec(&sp->isr_cnt);
return IRQ_NONE;
}
- val64 = 0xFFFFFFFFFFFFFFFFULL;
- /* Store current mask before masking all interrupts */
- org_mask = readq(&bar0->general_int_mask);
- writeq(val64, &bar0->general_int_mask);
+ if (napi) {
+ if (reason & GEN_INTR_RXTRAFFIC) {
+ if ( likely ( netif_rx_schedule_prep(dev)) ) {
+ __netif_rx_schedule(dev);
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask);
+ }
+ else
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
+ }
+ } else {
+ /*
+ * Rx handler is called by default, without checking for the
+ * cause of interrupt.
+ * rx_traffic_int reg is an R1 register, writing all 1's
+ * will ensure that the actual interrupt causing bit get's
+ * cleared and hence a read can be avoided.
+ */
+ if (reason & GEN_INTR_RXTRAFFIC)
+ writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int);
-#ifdef CONFIG_S2IO_NAPI
- if (reason & GEN_INTR_RXTRAFFIC) {
- if (netif_rx_schedule_prep(dev)) {
- writeq(val64, &bar0->rx_traffic_mask);
- __netif_rx_schedule(dev);
+ for (i = 0; i < config->rx_ring_num; i++) {
+ rx_intr_handler(&mac_control->rings[i]);
}
}
-#else
- /*
- * Rx handler is called by default, without checking for the
- * cause of interrupt.
- * rx_traffic_int reg is an R1 register, writing all 1's
- * will ensure that the actual interrupt causing bit get's
- * cleared and hence a read can be avoided.
- */
- writeq(val64, &bar0->rx_traffic_int);
- for (i = 0; i < config->rx_ring_num; i++) {
- rx_intr_handler(&mac_control->rings[i]);
- }
-#endif
/*
* tx_traffic_int reg is an R1 register, writing all 1's
* will ensure that the actual interrupt causing bit get's
* cleared and hence a read can be avoided.
*/
- writeq(val64, &bar0->tx_traffic_int);
+ if (reason & GEN_INTR_TXTRAFFIC)
+ writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int);
for (i = 0; i < config->tx_fifo_num; i++)
tx_intr_handler(&mac_control->fifos[i]);
* reallocate the buffers from the interrupt handler itself,
* else schedule a tasklet to reallocate the buffers.
*/
-#ifndef CONFIG_S2IO_NAPI
- for (i = 0; i < config->rx_ring_num; i++)
- s2io_chk_rx_buffers(sp, i);
-#endif
- writeq(org_mask, &bar0->general_int_mask);
+ if (!napi) {
+ for (i = 0; i < config->rx_ring_num; i++)
+ s2io_chk_rx_buffers(sp, i);
+ }
+
+ writeq(0, &bar0->general_int_mask);
+ readl(&bar0->general_int_status);
+
atomic_dec(&sp->isr_cnt);
return IRQ_HANDLED;
}
/**
* s2io_updt_stats -
*/
-static void s2io_updt_stats(nic_t *sp)
+static void s2io_updt_stats(struct s2io_nic *sp)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
int cnt = 0;
break; /* Updt failed */
} while(1);
} else {
- memset(sp->mac_control.stats_info, 0, sizeof(StatInfo_t));
+ memset(sp->mac_control.stats_info, 0, sizeof(struct stat_block));
}
}
static struct net_device_stats *s2io_get_stats(struct net_device *dev)
{
- nic_t *sp = dev->priv;
- mac_info_t *mac_control;
+ struct s2io_nic *sp = dev->priv;
+ struct mac_info *mac_control;
struct config_param *config;
{
int i, j, prev_cnt;
struct dev_mc_list *mclist;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, multi_mac = 0x010203040506ULL, mask =
0xfeffffffffffULL;
u64 dis_addr = 0xffffffffffffULL, mac_addr = 0;
static int s2io_set_mac_addr(struct net_device *dev, u8 * addr)
{
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
register u64 val64, mac_addr = 0;
int i;
static int s2io_ethtool_sset(struct net_device *dev,
struct ethtool_cmd *info)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
if ((info->autoneg == AUTONEG_ENABLE) ||
(info->speed != SPEED_10000) || (info->duplex != DUPLEX_FULL))
return -EINVAL;
static int s2io_ethtool_gset(struct net_device *dev, struct ethtool_cmd *info)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
info->supported = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
info->advertising = (SUPPORTED_10000baseT_Full | SUPPORTED_FIBRE);
info->port = PORT_FIBRE;
static void s2io_ethtool_gdrvinfo(struct net_device *dev,
struct ethtool_drvinfo *info)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
strncpy(info->driver, s2io_driver_name, sizeof(info->driver));
strncpy(info->version, s2io_driver_version, sizeof(info->version));
int i;
u64 reg;
u8 *reg_space = (u8 *) space;
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
regs->len = XENA_REG_SPACE;
regs->version = sp->pdev->subsystem_device;
*/
static void s2io_phy_id(unsigned long data)
{
- nic_t *sp = (nic_t *) data;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = (struct s2io_nic *) data;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0;
u16 subid;
static int s2io_ethtool_idnic(struct net_device *dev, u32 data)
{
u64 val64 = 0, last_gpio_ctrl_val;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u16 subid;
subid = sp->pdev->subsystem_device;
struct ethtool_pauseparam *ep)
{
u64 val64;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
val64 = readq(&bar0->rmac_pause_cfg);
if (val64 & RMAC_PAUSE_GEN_ENABLE)
struct ethtool_pauseparam *ep)
{
u64 val64;
- nic_t *sp = dev->priv;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct s2io_nic *sp = dev->priv;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
val64 = readq(&bar0->rmac_pause_cfg);
if (ep->tx_pause)
*/
#define S2IO_DEV_ID 5
-static int read_eeprom(nic_t * sp, int off, u64 * data)
+static int read_eeprom(struct s2io_nic * sp, int off, u64 * data)
{
int ret = -1;
u32 exit_cnt = 0;
u64 val64;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (sp->device_type == XFRAME_I_DEVICE) {
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
* 0 on success, -1 on failure.
*/
-static int write_eeprom(nic_t * sp, int off, u64 data, int cnt)
+static int write_eeprom(struct s2io_nic * sp, int off, u64 data, int cnt)
{
int exit_cnt = 0, ret = -1;
u64 val64;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
if (sp->device_type == XFRAME_I_DEVICE) {
val64 = I2C_CONTROL_DEV_ID(S2IO_DEV_ID) | I2C_CONTROL_ADDR(off) |
}
return ret;
}
-static void s2io_vpd_read(nic_t *nic)
+static void s2io_vpd_read(struct s2io_nic *nic)
{
u8 *vpd_data;
u8 data;
strcpy(nic->product_name, "Xframe I 10GbE network adapter");
vpd_addr = 0x50;
}
+ strcpy(nic->serial_num, "NOT AVAILABLE");
vpd_data = kmalloc(256, GFP_KERNEL);
if (!vpd_data)
pci_read_config_dword(nic->pdev, (vpd_addr + 4),
(u32 *)&vpd_data[i]);
}
- if ((!fail) && (vpd_data[1] < VPD_PRODUCT_NAME_LEN)) {
+
+ if(!fail) {
+ /* read serial number of adapter */
+ for (cnt = 0; cnt < 256; cnt++) {
+ if ((vpd_data[cnt] == 'S') &&
+ (vpd_data[cnt+1] == 'N') &&
+ (vpd_data[cnt+2] < VPD_STRING_LEN)) {
+ memset(nic->serial_num, 0, VPD_STRING_LEN);
+ memcpy(nic->serial_num, &vpd_data[cnt + 3],
+ vpd_data[cnt+2]);
+ break;
+ }
+ }
+ }
+
+ if ((!fail) && (vpd_data[1] < VPD_STRING_LEN)) {
memset(nic->product_name, 0, vpd_data[1]);
memcpy(nic->product_name, &vpd_data[3], vpd_data[1]);
}
{
u32 i, valid;
u64 data;
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
eeprom->magic = sp->pdev->vendor | (sp->pdev->device << 16);
{
int len = eeprom->len, cnt = 0;
u64 valid = 0, data;
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
if (eeprom->magic != (sp->pdev->vendor | (sp->pdev->device << 16))) {
DBG_PRINT(ERR_DBG,
* 0 on success.
*/
-static int s2io_register_test(nic_t * sp, uint64_t * data)
+static int s2io_register_test(struct s2io_nic * sp, uint64_t * data)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = 0, exp_val;
int fail = 0;
* 0 on success.
*/
-static int s2io_eeprom_test(nic_t * sp, uint64_t * data)
+static int s2io_eeprom_test(struct s2io_nic * sp, uint64_t * data)
{
int fail = 0;
u64 ret_data, org_4F0, org_7F0;
* 0 on success and -1 on failure.
*/
-static int s2io_bist_test(nic_t * sp, uint64_t * data)
+static int s2io_bist_test(struct s2io_nic * sp, uint64_t * data)
{
u8 bist = 0;
int cnt = 0, ret = -1;
* 0 on success.
*/
-static int s2io_link_test(nic_t * sp, uint64_t * data)
+static int s2io_link_test(struct s2io_nic * sp, uint64_t * data)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
val64 = readq(&bar0->adapter_status);
* 0 on success.
*/
-static int s2io_rldram_test(nic_t * sp, uint64_t * data)
+static int s2io_rldram_test(struct s2io_nic * sp, uint64_t * data)
{
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64;
int cnt, iteration = 0, test_fail = 0;
struct ethtool_test *ethtest,
uint64_t * data)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
int orig_state = netif_running(sp->dev);
if (ethtest->flags == ETH_TEST_FL_OFFLINE) {
u64 * tmp_stats)
{
int i = 0;
- nic_t *sp = dev->priv;
- StatInfo_t *stat_info = sp->mac_control.stats_info;
+ struct s2io_nic *sp = dev->priv;
+ struct stat_block *stat_info = sp->mac_control.stats_info;
s2io_updt_stats(sp);
tmp_stats[i++] =
static u32 s2io_ethtool_get_rx_csum(struct net_device * dev)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
return (sp->rx_csum);
}
static int s2io_ethtool_set_rx_csum(struct net_device *dev, u32 data)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
if (data)
sp->rx_csum = 1;
.set_tx_csum = s2io_ethtool_op_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
-#ifdef NETIF_F_TSO
.get_tso = s2io_ethtool_op_get_tso,
.set_tso = s2io_ethtool_op_set_tso,
-#endif
.get_ufo = ethtool_op_get_ufo,
.set_ufo = ethtool_op_set_ufo,
.self_test_count = s2io_ethtool_self_test_count,
static int s2io_change_mtu(struct net_device *dev, int new_mtu)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
if ((new_mtu < MIN_MTU) || (new_mtu > S2IO_JUMBO_SIZE)) {
DBG_PRINT(ERR_DBG, "%s: MTU size is invalid.\n",
if (netif_queue_stopped(dev))
netif_wake_queue(dev);
} else { /* Device is down */
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
u64 val64 = new_mtu;
writeq(vBIT(val64, 2, 14), &bar0->rmac_max_pyld_len);
static void s2io_tasklet(unsigned long dev_addr)
{
struct net_device *dev = (struct net_device *) dev_addr;
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
int i, ret;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
mac_control = &sp->mac_control;
static void s2io_set_link(struct work_struct *work)
{
- nic_t *nic = container_of(work, nic_t, set_link_task);
+ struct s2io_nic *nic = container_of(work, struct s2io_nic, set_link_task);
struct net_device *dev = nic->dev;
- XENA_dev_config_t __iomem *bar0 = nic->bar0;
+ struct XENA_dev_config __iomem *bar0 = nic->bar0;
register u64 val64;
u16 subid;
}
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(nic, val64, nic->device_enabled_once)) {
- if (LINK_IS_UP(val64)) {
- val64 = readq(&bar0->adapter_control);
- val64 |= ADAPTER_CNTL_EN;
- writeq(val64, &bar0->adapter_control);
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
- subid)) {
- val64 = readq(&bar0->gpio_control);
- val64 |= GPIO_CTRL_GPIO_0;
- writeq(val64, &bar0->gpio_control);
- val64 = readq(&bar0->gpio_control);
- } else {
- val64 |= ADAPTER_LED_ON;
+ if (LINK_IS_UP(val64)) {
+ if (!(readq(&bar0->adapter_control) & ADAPTER_CNTL_EN)) {
+ if (verify_xena_quiescence(nic)) {
+ val64 = readq(&bar0->adapter_control);
+ val64 |= ADAPTER_CNTL_EN;
writeq(val64, &bar0->adapter_control);
- }
- if (s2io_link_fault_indication(nic) ==
- MAC_RMAC_ERR_TIMER) {
- val64 = readq(&bar0->adapter_status);
- if (!LINK_IS_UP(val64)) {
- DBG_PRINT(ERR_DBG, "%s:", dev->name);
- DBG_PRINT(ERR_DBG, " Link down");
- DBG_PRINT(ERR_DBG, "after ");
- DBG_PRINT(ERR_DBG, "enabling ");
- DBG_PRINT(ERR_DBG, "device \n");
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(
+ nic->device_type, subid)) {
+ val64 = readq(&bar0->gpio_control);
+ val64 |= GPIO_CTRL_GPIO_0;
+ writeq(val64, &bar0->gpio_control);
+ val64 = readq(&bar0->gpio_control);
+ } else {
+ val64 |= ADAPTER_LED_ON;
+ writeq(val64, &bar0->adapter_control);
}
- }
- if (nic->device_enabled_once == FALSE) {
nic->device_enabled_once = TRUE;
+ } else {
+ DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
+ DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
+ netif_stop_queue(dev);
}
+ }
+ val64 = readq(&bar0->adapter_status);
+ if (!LINK_IS_UP(val64)) {
+ DBG_PRINT(ERR_DBG, "%s:", dev->name);
+ DBG_PRINT(ERR_DBG, " Link down after enabling ");
+ DBG_PRINT(ERR_DBG, "device \n");
+ } else
s2io_link(nic, LINK_UP);
- } else {
- if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
- subid)) {
- val64 = readq(&bar0->gpio_control);
- val64 &= ~GPIO_CTRL_GPIO_0;
- writeq(val64, &bar0->gpio_control);
- val64 = readq(&bar0->gpio_control);
- }
- s2io_link(nic, LINK_DOWN);
+ } else {
+ if (CARDS_WITH_FAULTY_LINK_INDICATORS(nic->device_type,
+ subid)) {
+ val64 = readq(&bar0->gpio_control);
+ val64 &= ~GPIO_CTRL_GPIO_0;
+ writeq(val64, &bar0->gpio_control);
+ val64 = readq(&bar0->gpio_control);
}
- } else { /* NIC is not Quiescent. */
- DBG_PRINT(ERR_DBG, "%s: Error: ", dev->name);
- DBG_PRINT(ERR_DBG, "device is not Quiescent\n");
- netif_stop_queue(dev);
+ s2io_link(nic, LINK_DOWN);
}
clear_bit(0, &(nic->link_state));
}
-static int set_rxd_buffer_pointer(nic_t *sp, RxD_t *rxdp, buffAdd_t *ba,
- struct sk_buff **skb, u64 *temp0, u64 *temp1,
- u64 *temp2, int size)
+static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp,
+ struct buffAdd *ba,
+ struct sk_buff **skb, u64 *temp0, u64 *temp1,
+ u64 *temp2, int size)
{
struct net_device *dev = sp->dev;
struct sk_buff *frag_list;
* using same mapped address for the Rxd
* buffer pointer
*/
- ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0;
+ ((struct RxD1*)rxdp)->Buffer0_ptr = *temp0;
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
* such it will be used for next rxd whose
* Host Control is NULL
*/
- ((RxD1_t*)rxdp)->Buffer0_ptr = *temp0 =
+ ((struct RxD1*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single( sp->pdev, (*skb)->data,
size - NET_IP_ALIGN,
PCI_DMA_FROMDEVICE);
} else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) {
/* Two buffer Mode */
if (*skb) {
- ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
- ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0;
- ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
+ ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2;
+ ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0;
+ ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1;
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
DBG_PRINT(ERR_DBG, "%s: dev_alloc_skb failed\n",
- dev->name);
+ dev->name);
return -ENOMEM;
}
- ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
+ ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single(sp->pdev, (*skb)->data,
dev->mtu + 4,
PCI_DMA_FROMDEVICE);
- ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
+ ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
rxdp->Host_Control = (unsigned long) (*skb);
/* Buffer-1 will be dummy buffer not used */
- ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 =
+ ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1 =
pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN,
PCI_DMA_FROMDEVICE);
}
} else if ((rxdp->Host_Control == 0)) {
/* Three buffer mode */
if (*skb) {
- ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0;
- ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1;
- ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2;
+ ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0;
+ ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1;
+ ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2;
} else {
*skb = dev_alloc_skb(size);
if (!(*skb)) {
dev->name);
return -ENOMEM;
}
- ((RxD3_t*)rxdp)->Buffer0_ptr = *temp0 =
+ ((struct RxD3*)rxdp)->Buffer0_ptr = *temp0 =
pci_map_single(sp->pdev, ba->ba_0, BUF0_LEN,
PCI_DMA_FROMDEVICE);
/* Buffer-1 receives L3/L4 headers */
- ((RxD3_t*)rxdp)->Buffer1_ptr = *temp1 =
+ ((struct RxD3*)rxdp)->Buffer1_ptr = *temp1 =
pci_map_single( sp->pdev, (*skb)->data,
l3l4hdr_size + 4,
PCI_DMA_FROMDEVICE);
/*
* Buffer-2 receives L4 data payload
*/
- ((RxD3_t*)rxdp)->Buffer2_ptr = *temp2 =
+ ((struct RxD3*)rxdp)->Buffer2_ptr = *temp2 =
pci_map_single( sp->pdev, frag_list->data,
dev->mtu, PCI_DMA_FROMDEVICE);
}
}
return 0;
}
-static void set_rxd_buffer_size(nic_t *sp, RxD_t *rxdp, int size)
+static void set_rxd_buffer_size(struct s2io_nic *sp, struct RxD_t *rxdp,
+ int size)
{
struct net_device *dev = sp->dev;
if (sp->rxd_mode == RXD_MODE_1) {
}
}
-static int rxd_owner_bit_reset(nic_t *sp)
+static int rxd_owner_bit_reset(struct s2io_nic *sp)
{
int i, j, k, blk_cnt = 0, size;
- mac_info_t * mac_control = &sp->mac_control;
+ struct mac_info * mac_control = &sp->mac_control;
struct config_param *config = &sp->config;
struct net_device *dev = sp->dev;
- RxD_t *rxdp = NULL;
+ struct RxD_t *rxdp = NULL;
struct sk_buff *skb = NULL;
- buffAdd_t *ba = NULL;
+ struct buffAdd *ba = NULL;
u64 temp0_64 = 0, temp1_64 = 0, temp2_64 = 0;
/* Calculate the size based on ring mode */
}
-static int s2io_add_isr(nic_t * sp)
+static int s2io_add_isr(struct s2io_nic * sp)
{
int ret = 0;
struct net_device *dev = sp->dev;
sp->intr_type = INTA;
}
- /* Store the values of the MSIX table in the nic_t structure */
+ /* Store the values of the MSIX table in the struct s2io_nic structure */
store_xmsi_data(sp);
/* After proper initialization of H/W, register ISR */
}
return 0;
}
-static void s2io_rem_isr(nic_t * sp)
+static void s2io_rem_isr(struct s2io_nic * sp)
{
int cnt = 0;
struct net_device *dev = sp->dev;
} while(cnt < 5);
}
-static void s2io_card_down(nic_t * sp)
+static void s2io_card_down(struct s2io_nic * sp)
{
int cnt = 0;
- XENA_dev_config_t __iomem *bar0 = sp->bar0;
+ struct XENA_dev_config __iomem *bar0 = sp->bar0;
unsigned long flags;
register u64 val64 = 0;
rxd_owner_bit_reset(sp);
val64 = readq(&bar0->adapter_status);
- if (verify_xena_quiescence(sp, val64, sp->device_enabled_once)) {
+ if (verify_xena_quiescence(sp)) {
+ if(verify_pcc_quiescent(sp, sp->device_enabled_once))
break;
}
clear_bit(0, &(sp->link_state));
}
-static int s2io_card_up(nic_t * sp)
+static int s2io_card_up(struct s2io_nic * sp)
{
int i, ret = 0;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
struct net_device *dev = (struct net_device *) sp->dev;
u16 interruptible;
DBG_PRINT(INFO_DBG, "Buf in ring:%d is %d:\n", i,
atomic_read(&sp->rx_bufs_left[i]));
}
+ /* Maintain the state prior to the open */
+ if (sp->promisc_flg)
+ sp->promisc_flg = 0;
+ if (sp->m_cast_flg) {
+ sp->m_cast_flg = 0;
+ sp->all_multi_pos= 0;
+ }
/* Setting its receive mode */
s2io_set_multicast(dev);
static void s2io_restart_nic(struct work_struct *work)
{
- nic_t *sp = container_of(work, nic_t, rst_timer_task);
+ struct s2io_nic *sp = container_of(work, struct s2io_nic, rst_timer_task);
struct net_device *dev = sp->dev;
s2io_card_down(sp);
static void s2io_tx_watchdog(struct net_device *dev)
{
- nic_t *sp = dev->priv;
+ struct s2io_nic *sp = dev->priv;
if (netif_carrier_ok(dev)) {
schedule_work(&sp->rst_timer_task);
* Return value:
* SUCCESS on success and -1 on failure.
*/
-static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp)
+static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp)
{
- nic_t *sp = ring_data->nic;
+ struct s2io_nic *sp = ring_data->nic;
struct net_device *dev = (struct net_device *) sp->dev;
struct sk_buff *skb = (struct sk_buff *)
((unsigned long) rxdp->Host_Control);
int ring_no = ring_data->ring_no;
u16 l3_csum, l4_csum;
unsigned long long err = rxdp->Control_1 & RXD_T_CODE;
- lro_t *lro;
+ struct lro *lro;
skb->dev = dev;
int buf2_len = RXD_GET_BUFFER2_SIZE_3(rxdp->Control_2);
unsigned char *buff = skb_push(skb, buf0_len);
- buffAdd_t *ba = &ring_data->ba[get_block][get_off];
+ struct buffAdd *ba = &ring_data->ba[get_block][get_off];
sp->stats.rx_bytes += buf0_len + buf2_len;
memcpy(buff, ba->ba_0, buf0_len);
skb_put(skb, buf1_len);
skb->len += buf2_len;
skb->data_len += buf2_len;
- skb->truesize += buf2_len;
skb_put(skb_shinfo(skb)->frag_list, buf2_len);
sp->stats.rx_bytes += buf1_len;
if (!sp->lro) {
skb->protocol = eth_type_trans(skb, dev);
-#ifdef CONFIG_S2IO_NAPI
- if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
- /* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_receive_skb(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
- } else {
- netif_receive_skb(skb);
- }
-#else
if (sp->vlgrp && RXD_GET_VLAN_TAG(rxdp->Control_2)) {
/* Queueing the vlan frame to the upper layer */
- vlan_hwaccel_rx(skb, sp->vlgrp,
- RXD_GET_VLAN_TAG(rxdp->Control_2));
+ if (napi)
+ vlan_hwaccel_receive_skb(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
+ else
+ vlan_hwaccel_rx(skb, sp->vlgrp,
+ RXD_GET_VLAN_TAG(rxdp->Control_2));
} else {
- netif_rx(skb);
+ if (napi)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
}
-#endif
} else {
send_up:
queue_rx_frame(skb);
* void.
*/
-static void s2io_link(nic_t * sp, int link)
+static void s2io_link(struct s2io_nic * sp, int link)
{
struct net_device *dev = (struct net_device *) sp->dev;
* void
*/
-static void s2io_init_pci(nic_t * sp)
+static void s2io_init_pci(struct s2io_nic * sp)
{
u16 pci_cmd = 0, pcix_cmd = 0;
DBG_PRINT(ERR_DBG, "s2io: Default to 8 Rx rings\n");
rx_ring_num = 8;
}
-#ifdef CONFIG_S2IO_NAPI
- if (*dev_intr_type != INTA) {
- DBG_PRINT(ERR_DBG, "s2io: NAPI cannot be enabled when "
- "MSI/MSI-X is enabled. Defaulting to INTA\n");
- *dev_intr_type = INTA;
- }
-#endif
+ if (*dev_intr_type != INTA)
+ napi = 0;
+
#ifndef CONFIG_PCI_MSI
if (*dev_intr_type != INTA) {
DBG_PRINT(ERR_DBG, "s2io: This kernel does not support"
"Defaulting to INTA\n");
*dev_intr_type = INTA;
}
+ if ( (rx_ring_num > 1) && (*dev_intr_type != INTA) )
+ napi = 0;
if (rx_ring_mode > 3) {
DBG_PRINT(ERR_DBG, "s2io: Requested ring mode not supported\n");
DBG_PRINT(ERR_DBG, "s2io: Defaulting to 3-buffer mode\n");
static int __devinit
s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
{
- nic_t *sp;
+ struct s2io_nic *sp;
struct net_device *dev;
int i, j, ret;
int dma_flag = FALSE;
u32 mac_up, mac_down;
u64 val64 = 0, tmp64 = 0;
- XENA_dev_config_t __iomem *bar0 = NULL;
+ struct XENA_dev_config __iomem *bar0 = NULL;
u16 subid;
- mac_info_t *mac_control;
+ struct mac_info *mac_control;
struct config_param *config;
int mode;
u8 dev_intr_type = intr_type;
}
}
- dev = alloc_etherdev(sizeof(nic_t));
+ dev = alloc_etherdev(sizeof(struct s2io_nic));
if (dev == NULL) {
DBG_PRINT(ERR_DBG, "Device allocation failed\n");
pci_disable_device(pdev);
/* Private member variable initialized to s2io NIC structure */
sp = dev->priv;
- memset(sp, 0, sizeof(nic_t));
+ memset(sp, 0, sizeof(struct s2io_nic));
sp->dev = dev;
sp->pdev = pdev;
sp->high_dma_flag = dma_flag;
sp->bar0 = ioremap(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0));
if (!sp->bar0) {
- DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem1\n",
+ DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem1\n",
dev->name);
ret = -ENOMEM;
goto bar0_remap_failed;
sp->bar1 = ioremap(pci_resource_start(pdev, 2),
pci_resource_len(pdev, 2));
if (!sp->bar1) {
- DBG_PRINT(ERR_DBG, "%s: S2IO: cannot remap io mem2\n",
+ DBG_PRINT(ERR_DBG, "%s: Neterion: cannot remap io mem2\n",
dev->name);
ret = -ENOMEM;
goto bar1_remap_failed;
/* Initializing the BAR1 address as the start of the FIFO pointer. */
for (j = 0; j < MAX_TX_FIFOS; j++) {
- mac_control->tx_FIFO_start[j] = (TxFIFO_element_t __iomem *)
+ mac_control->tx_FIFO_start[j] = (struct TxFIFO_element __iomem *)
(sp->bar1 + (j * 0x00020000));
}
* will use eth_mac_addr() for dev->set_mac_address
* mac address will be set every time dev->open() is called
*/
-#if defined(CONFIG_S2IO_NAPI)
dev->poll = s2io_poll;
dev->weight = 32;
-#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
dev->poll_controller = s2io_netpoll;
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
if (sp->high_dma_flag == TRUE)
dev->features |= NETIF_F_HIGHDMA;
-#ifdef NETIF_F_TSO
dev->features |= NETIF_F_TSO;
-#endif
-#ifdef NETIF_F_TSO6
dev->features |= NETIF_F_TSO6;
-#endif
- if (sp->device_type & XFRAME_II_DEVICE) {
+ if ((sp->device_type & XFRAME_II_DEVICE) && (ufo)) {
dev->features |= NETIF_F_UFO;
dev->features |= NETIF_F_HW_CSUM;
}
/* Initialize spinlocks */
spin_lock_init(&sp->tx_lock);
-#ifndef CONFIG_S2IO_NAPI
- spin_lock_init(&sp->put_lock);
-#endif
+
+ if (!napi)
+ spin_lock_init(&sp->put_lock);
spin_lock_init(&sp->rx_lock);
/*
DBG_PRINT(ERR_DBG, "%s: Driver version %s\n", dev->name,
s2io_driver_version);
DBG_PRINT(ERR_DBG, "%s: MAC ADDR: "
- "%02x:%02x:%02x:%02x:%02x:%02x\n", dev->name,
+ "%02x:%02x:%02x:%02x:%02x:%02x", dev->name,
sp->def_mac_addr[0].mac_addr[0],
sp->def_mac_addr[0].mac_addr[1],
sp->def_mac_addr[0].mac_addr[2],
sp->def_mac_addr[0].mac_addr[3],
sp->def_mac_addr[0].mac_addr[4],
sp->def_mac_addr[0].mac_addr[5]);
+ DBG_PRINT(ERR_DBG, "SERIAL NUMBER: %s\n", sp->serial_num);
if (sp->device_type & XFRAME_II_DEVICE) {
mode = s2io_print_pci_mode(sp);
if (mode < 0) {
dev->name);
break;
}
-#ifdef CONFIG_S2IO_NAPI
- DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
-#endif
+
+ if (napi)
+ DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name);
switch(sp->intr_type) {
case INTA:
DBG_PRINT(ERR_DBG, "%s: Interrupt type INTA\n", dev->name);
if (sp->lro)
DBG_PRINT(ERR_DBG, "%s: Large receive offload enabled\n",
dev->name);
-
+ if (ufo)
+ DBG_PRINT(ERR_DBG, "%s: UDP Fragmentation Offload(UFO)"
+ " enabled\n", dev->name);
/* Initialize device name */
sprintf(sp->name, "%s Neterion %s", dev->name, sp->product_name);
{
struct net_device *dev =
(struct net_device *) pci_get_drvdata(pdev);
- nic_t *sp;
+ struct s2io_nic *sp;
if (dev == NULL) {
DBG_PRINT(ERR_DBG, "Driver Data is NULL!!\n");
free_shared_mem(sp);
iounmap(sp->bar0);
iounmap(sp->bar1);
- pci_disable_device(pdev);
if (sp->intr_type != MSI_X)
pci_release_regions(pdev);
else {
}
pci_set_drvdata(pdev, NULL);
free_netdev(dev);
+ pci_disable_device(pdev);
}
/**
* Description: This function is the cleanup routine for the driver. It unregist * ers the driver.
*/
-static void s2io_closer(void)
+static __exit void s2io_closer(void)
{
pci_unregister_driver(&s2io_driver);
DBG_PRINT(INIT_DBG, "cleanup done\n");
module_exit(s2io_closer);
static int check_L2_lro_capable(u8 *buffer, struct iphdr **ip,
- struct tcphdr **tcp, RxD_t *rxdp)
+ struct tcphdr **tcp, struct RxD_t *rxdp)
{
int ip_off;
u8 l2_type = (u8)((rxdp->Control_1 >> 37) & 0x7), ip_len;
return 0;
}
-static int check_for_socket_match(lro_t *lro, struct iphdr *ip,
+static int check_for_socket_match(struct lro *lro, struct iphdr *ip,
struct tcphdr *tcp)
{
DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
return(ntohs(ip->tot_len) - (ip->ihl << 2) - (tcp->doff << 2));
}
-static void initiate_new_session(lro_t *lro, u8 *l2h,
+static void initiate_new_session(struct lro *lro, u8 *l2h,
struct iphdr *ip, struct tcphdr *tcp, u32 tcp_pyld_len)
{
DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
lro->in_use = 1;
}
-static void update_L3L4_header(nic_t *sp, lro_t *lro)
+static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro)
{
struct iphdr *ip = lro->iph;
struct tcphdr *tcp = lro->tcph;
u16 nchk;
- StatInfo_t *statinfo = sp->mac_control.stats_info;
+ struct stat_block *statinfo = sp->mac_control.stats_info;
DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
/* Update L3 header */
statinfo->sw_stat.num_aggregations++;
}
-static void aggregate_new_rx(lro_t *lro, struct iphdr *ip,
+static void aggregate_new_rx(struct lro *lro, struct iphdr *ip,
struct tcphdr *tcp, u32 l4_pyld)
{
DBG_PRINT(INFO_DBG,"%s: Been here...\n", __FUNCTION__);
}
}
-static int verify_l3_l4_lro_capable(lro_t *l_lro, struct iphdr *ip,
+static int verify_l3_l4_lro_capable(struct lro *l_lro, struct iphdr *ip,
struct tcphdr *tcp, u32 tcp_pyld_len)
{
u8 *ptr;
}
static int
-s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, lro_t **lro,
- RxD_t *rxdp, nic_t *sp)
+s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
+ struct RxD_t *rxdp, struct s2io_nic *sp)
{
struct iphdr *ip;
struct tcphdr *tcph;
tcph = (struct tcphdr *)*tcp;
*tcp_len = get_l4_pyld_length(ip, tcph);
for (i=0; i<MAX_LRO_SESSIONS; i++) {
- lro_t *l_lro = &sp->lro0_n[i];
+ struct lro *l_lro = &sp->lro0_n[i];
if (l_lro->in_use) {
if (check_for_socket_match(l_lro, ip, tcph))
continue;
}
for (i=0; i<MAX_LRO_SESSIONS; i++) {
- lro_t *l_lro = &sp->lro0_n[i];
+ struct lro *l_lro = &sp->lro0_n[i];
if (!(l_lro->in_use)) {
*lro = l_lro;
ret = 3; /* Begin anew */
return ret;
}
-static void clear_lro_session(lro_t *lro)
+static void clear_lro_session(struct lro *lro)
{
- static u16 lro_struct_size = sizeof(lro_t);
+ static u16 lro_struct_size = sizeof(struct lro);
memset(lro, 0, lro_struct_size);
}
struct net_device *dev = skb->dev;
skb->protocol = eth_type_trans(skb, dev);
-#ifdef CONFIG_S2IO_NAPI
- netif_receive_skb(skb);
-#else
- netif_rx(skb);
-#endif
+ if (napi)
+ netif_receive_skb(skb);
+ else
+ netif_rx(skb);
}
-static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb,
+static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
+ struct sk_buff *skb,
u32 tcp_len)
{
struct sk_buff *first = lro->parent;
lro->last_frag->next = skb;
else
skb_shinfo(first)->frag_list = skb;
+ first->truesize += skb->truesize;
lro->last_frag = skb;
sp->mac_control.stats_info->sw_stat.clubbed_frms_cnt++;
return;
#undef SUCCESS
#define SUCCESS 0
#define FAILURE -1
+#define S2IO_MINUS_ONE 0xFFFFFFFFFFFFFFFFULL
+#define S2IO_MAX_PCI_CONFIG_SPACE_REINIT 100
#define CHECKBIT(value, nbit) (value & (1 << nbit))
#define MAX_FLICKER_TIME 60000 /* 60 Secs */
/* Maximum outstanding splits to be configured into xena. */
-typedef enum xena_max_outstanding_splits {
+enum {
XENA_ONE_SPLIT_TRANSACTION = 0,
XENA_TWO_SPLIT_TRANSACTION = 1,
XENA_THREE_SPLIT_TRANSACTION = 2,
XENA_TWELVE_SPLIT_TRANSACTION = 5,
XENA_SIXTEEN_SPLIT_TRANSACTION = 6,
XENA_THIRTYTWO_SPLIT_TRANSACTION = 7
-} xena_max_outstanding_splits;
+};
#define XENA_MAX_OUTSTANDING_SPLITS(n) (n << 4)
/* OS concerned variables and constants */
#define S2IO_JUMBO_SIZE 9600
/* Driver statistics maintained by driver */
-typedef struct {
+struct swStat {
unsigned long long single_ecc_errs;
unsigned long long double_ecc_errs;
unsigned long long parity_err_cnt;
unsigned long long flush_max_pkts;
unsigned long long sum_avg_pkts_aggregated;
unsigned long long num_aggregations;
-} swStat_t;
+};
/* Xpak releated alarm and warnings */
-typedef struct {
+struct xpakStat {
u64 alarm_transceiver_temp_high;
u64 alarm_transceiver_temp_low;
u64 alarm_laser_bias_current_high;
u64 warn_laser_output_power_low;
u64 xpak_regs_stat;
u32 xpak_timer_count;
-} xpakStat_t;
+};
/* The statistics block of Xena */
-typedef struct stat_block {
+struct stat_block {
/* Tx MAC statistics counters. */
__le32 tmac_data_octets;
__le32 tmac_frms;
__le32 reserved_14;
__le32 link_fault_cnt;
u8 buffer[20];
- swStat_t sw_stat;
- xpakStat_t xpak_stat;
-} StatInfo_t;
+ struct swStat sw_stat;
+ struct xpakStat xpak_stat;
+};
/*
* Structures representing different init time configuration
};
/* Maintains Per FIFO related information. */
-typedef struct tx_fifo_config {
+struct tx_fifo_config {
#define MAX_AVAILABLE_TXDS 8192
u32 fifo_len; /* specifies len of FIFO upto 8192, ie no of TxDLs */
/* Priority definition */
u8 f_no_snoop;
#define NO_SNOOP_TXD 0x01
#define NO_SNOOP_TXD_BUFFER 0x02
-} tx_fifo_config_t;
+};
/* Maintains per Ring related information */
-typedef struct rx_ring_config {
+struct rx_ring_config {
u32 num_rxd; /*No of RxDs per Rx Ring */
#define RX_RING_PRI_0 0 /* highest */
#define RX_RING_PRI_1 1
u8 f_no_snoop;
#define NO_SNOOP_RXD 0x01
#define NO_SNOOP_RXD_BUFFER 0x02
-} rx_ring_config_t;
+};
/* This structure provides contains values of the tunable parameters
* of the H/W
u32 tx_fifo_num; /*Number of Tx FIFOs */
u8 fifo_mapping[MAX_TX_FIFOS];
- tx_fifo_config_t tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
+ struct tx_fifo_config tx_cfg[MAX_TX_FIFOS]; /*Per-Tx FIFO config */
u32 max_txds; /*Max no. of Tx buffer descriptor per TxDL */
u64 tx_intr_type;
/* Specifies if Tx Intr is UTILZ or PER_LIST type. */
u32 rx_ring_num; /*Number of receive rings */
#define MAX_RX_BLOCKS_PER_RING 150
- rx_ring_config_t rx_cfg[MAX_RX_RINGS]; /*Per-Rx Ring config */
+ struct rx_ring_config rx_cfg[MAX_RX_RINGS]; /*Per-Rx Ring config */
u8 bimodal; /*Flag for setting bimodal interrupts*/
#define HEADER_ETHERNET_II_802_3_SIZE 14
};
/* Structure representing MAC Addrs */
-typedef struct mac_addr {
+struct mac_addr {
u8 mac_addr[ETH_ALEN];
-} macaddr_t;
+};
/* Structure that represent every FIFO element in the BAR1
* Address location.
*/
-typedef struct _TxFIFO_element {
+struct TxFIFO_element {
u64 TxDL_Pointer;
u64 List_Control;
#define TX_FIFO_SPECIAL_FUNC BIT(23)
#define TX_FIFO_DS_NO_SNOOP BIT(31)
#define TX_FIFO_BUFF_NO_SNOOP BIT(30)
-} TxFIFO_element_t;
+};
/* Tx descriptor structure */
-typedef struct _TxD {
+struct TxD {
u64 Control_1;
/* bit mask */
#define TXD_LIST_OWN_XENA BIT(7)
u64 Buffer_Pointer;
u64 Host_Control; /* reserved for host */
-} TxD_t;
+};
/* Structure to hold the phy and virt addr of every TxDL. */
-typedef struct list_info_hold {
+struct list_info_hold {
dma_addr_t list_phy_addr;
void *list_virt_addr;
-} list_info_hold_t;
+};
/* Rx descriptor structure for 1 buffer mode */
-typedef struct _RxD_t {
+struct RxD_t {
u64 Host_Control; /* reserved for host */
u64 Control_1;
#define RXD_OWN_XENA BIT(7)
#define SET_NUM_TAG(val) vBIT(val,16,32)
-} RxD_t;
+};
/* Rx descriptor structure for 1 buffer mode */
-typedef struct _RxD1_t {
- struct _RxD_t h;
+struct RxD1 {
+ struct RxD_t h;
#define MASK_BUFFER0_SIZE_1 vBIT(0x3FFF,2,14)
#define SET_BUFFER0_SIZE_1(val) vBIT(val,2,14)
#define RXD_GET_BUFFER0_SIZE_1(_Control_2) \
(u16)((_Control_2 & MASK_BUFFER0_SIZE_1) >> 48)
u64 Buffer0_ptr;
-} RxD1_t;
+};
/* Rx descriptor structure for 3 or 2 buffer mode */
-typedef struct _RxD3_t {
- struct _RxD_t h;
+struct RxD3 {
+ struct RxD_t h;
#define MASK_BUFFER0_SIZE_3 vBIT(0xFF,2,14)
#define MASK_BUFFER1_SIZE_3 vBIT(0xFFFF,16,16)
u64 Buffer0_ptr;
u64 Buffer1_ptr;
u64 Buffer2_ptr;
-} RxD3_t;
+};
/* Structure that represents the Rx descriptor block which contains
* 128 Rx descriptors.
*/
-typedef struct _RxD_block {
+struct RxD_block {
#define MAX_RXDS_PER_BLOCK_1 127
- RxD1_t rxd[MAX_RXDS_PER_BLOCK_1];
+ struct RxD1 rxd[MAX_RXDS_PER_BLOCK_1];
u64 reserved_0;
#define END_OF_BLOCK 0xFEFFFFFFFFFFFFFFULL
u64 pNext_RxD_Blk_physical; /* Buff0_ptr.In a 32 bit arch
* the upper 32 bits should
* be 0 */
-} RxD_block_t;
+};
#define SIZE_OF_BLOCK 4096
-#define RXD_MODE_1 0
-#define RXD_MODE_3A 1
-#define RXD_MODE_3B 2
+#define RXD_MODE_1 0 /* One Buffer mode */
+#define RXD_MODE_3A 1 /* Three Buffer mode */
+#define RXD_MODE_3B 2 /* Two Buffer mode */
/* Structure to hold virtual addresses of Buf0 and Buf1 in
* 2buf mode. */
-typedef struct bufAdd {
+struct buffAdd {
void *ba_0_org;
void *ba_1_org;
void *ba_0;
void *ba_1;
-} buffAdd_t;
+};
/* Structure which stores all the MAC control parameters */
* from which the Rx Interrupt processor can start picking
* up the RxDs for processing.
*/
-typedef struct _rx_curr_get_info_t {
+struct rx_curr_get_info {
u32 block_index;
u32 offset;
u32 ring_len;
-} rx_curr_get_info_t;
+};
-typedef rx_curr_get_info_t rx_curr_put_info_t;
+struct rx_curr_put_info {
+ u32 block_index;
+ u32 offset;
+ u32 ring_len;
+};
/* This structure stores the offset of the TxDl in the FIFO
* from which the Tx Interrupt processor can start picking
* up the TxDLs for send complete interrupt processing.
*/
-typedef struct {
+struct tx_curr_get_info {
u32 offset;
u32 fifo_len;
-} tx_curr_get_info_t;
-
-typedef tx_curr_get_info_t tx_curr_put_info_t;
+};
+struct tx_curr_put_info {
+ u32 offset;
+ u32 fifo_len;
+};
-typedef struct rxd_info {
+struct rxd_info {
void *virt_addr;
dma_addr_t dma_addr;
-}rxd_info_t;
+};
/* Structure that holds the Phy and virt addresses of the Blocks */
-typedef struct rx_block_info {
+struct rx_block_info {
void *block_virt_addr;
dma_addr_t block_dma_addr;
- rxd_info_t *rxds;
-} rx_block_info_t;
-
-/* pre declaration of the nic structure */
-typedef struct s2io_nic nic_t;
+ struct rxd_info *rxds;
+};
/* Ring specific structure */
-typedef struct ring_info {
+struct ring_info {
/* The ring number */
int ring_no;
* Place holders for the virtual and physical addresses of
* all the Rx Blocks
*/
- rx_block_info_t rx_blocks[MAX_RX_BLOCKS_PER_RING];
+ struct rx_block_info rx_blocks[MAX_RX_BLOCKS_PER_RING];
int block_count;
int pkt_cnt;
* Put pointer info which indictes which RxD has to be replenished
* with a new buffer.
*/
- rx_curr_put_info_t rx_curr_put_info;
+ struct rx_curr_put_info rx_curr_put_info;
/*
* Get pointer info which indictes which is the last RxD that was
* processed by the driver.
*/
- rx_curr_get_info_t rx_curr_get_info;
+ struct rx_curr_get_info rx_curr_get_info;
-#ifndef CONFIG_S2IO_NAPI
/* Index to the absolute position of the put pointer of Rx ring */
int put_pos;
-#endif
/* Buffer Address store. */
- buffAdd_t **ba;
- nic_t *nic;
-} ring_info_t;
+ struct buffAdd **ba;
+ struct s2io_nic *nic;
+};
/* Fifo specific structure */
-typedef struct fifo_info {
+struct fifo_info {
/* FIFO number */
int fifo_no;
int max_txds;
/* Place holder of all the TX List's Phy and Virt addresses. */
- list_info_hold_t *list_info;
+ struct list_info_hold *list_info;
/*
* Current offset within the tx FIFO where driver would write
* new Tx frame
*/
- tx_curr_put_info_t tx_curr_put_info;
+ struct tx_curr_put_info tx_curr_put_info;
/*
* Current offset within tx FIFO from where the driver would start freeing
* the buffers
*/
- tx_curr_get_info_t tx_curr_get_info;
+ struct tx_curr_get_info tx_curr_get_info;
- nic_t *nic;
-}fifo_info_t;
+ struct s2io_nic *nic;
+};
/* Information related to the Tx and Rx FIFOs and Rings of Xena
* is maintained in this structure.
*/
-typedef struct mac_info {
+struct mac_info {
/* tx side stuff */
/* logical pointer of start of each Tx FIFO */
- TxFIFO_element_t __iomem *tx_FIFO_start[MAX_TX_FIFOS];
+ struct TxFIFO_element __iomem *tx_FIFO_start[MAX_TX_FIFOS];
/* Fifo specific structure */
- fifo_info_t fifos[MAX_TX_FIFOS];
+ struct fifo_info fifos[MAX_TX_FIFOS];
/* Save virtual address of TxD page with zero DMA addr(if any) */
void *zerodma_virt_addr;
/* rx side stuff */
/* Ring specific structure */
- ring_info_t rings[MAX_RX_RINGS];
+ struct ring_info rings[MAX_RX_RINGS];
u16 rmac_pause_time;
u16 mc_pause_threshold_q0q3;
void *stats_mem; /* orignal pointer to allocated mem */
dma_addr_t stats_mem_phy; /* Physical address of the stat block */
u32 stats_mem_sz;
- StatInfo_t *stats_info; /* Logical address of the stat block */
-} mac_info_t;
+ struct stat_block *stats_info; /* Logical address of the stat block */
+};
/* structure representing the user defined MAC addresses */
-typedef struct {
+struct usr_addr {
char addr[ETH_ALEN];
int usage_cnt;
-} usr_addr_t;
+};
/* Default Tunable parameters of the NIC. */
#define DEFAULT_FIFO_0_LEN 4096
};
/* Data structure to represent a LRO session */
-typedef struct lro {
+struct lro {
struct sk_buff *parent;
struct sk_buff *last_frag;
u8 *l2h;
u32 cur_tsval;
u32 cur_tsecr;
u8 saw_ts;
-}lro_t;
+};
/* Structure representing one instance of the NIC */
struct s2io_nic {
int rxd_mode;
-#ifdef CONFIG_S2IO_NAPI
/*
* Count of packets to be processed in a given iteration, it will be indicated
* by the quota field of the device structure when NAPI is enabled.
*/
int pkts_to_process;
-#endif
struct net_device *dev;
- mac_info_t mac_control;
+ struct mac_info mac_control;
struct config_param config;
struct pci_dev *pdev;
void __iomem *bar0;
#define MAX_MAC_SUPPORTED 16
#define MAX_SUPPORTED_MULTICASTS MAX_MAC_SUPPORTED
- macaddr_t def_mac_addr[MAX_MAC_SUPPORTED];
- macaddr_t pre_mac_addr[MAX_MAC_SUPPORTED];
+ struct mac_addr def_mac_addr[MAX_MAC_SUPPORTED];
+ struct mac_addr pre_mac_addr[MAX_MAC_SUPPORTED];
struct net_device_stats stats;
int high_dma_flag;
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t tx_lock;
-#ifndef CONFIG_S2IO_NAPI
spinlock_t put_lock;
-#endif
#define PROMISC 1
#define ALL_MULTI 2
#define MAX_ADDRS_SUPPORTED 64
u16 usr_addr_count;
u16 mc_addr_count;
- usr_addr_t usr_addrs[MAX_ADDRS_SUPPORTED];
+ struct usr_addr usr_addrs[MAX_ADDRS_SUPPORTED];
u16 m_cast_flg;
u16 all_multi_pos;
u8 device_type;
#define MAX_LRO_SESSIONS 32
- lro_t lro0_n[MAX_LRO_SESSIONS];
+ struct lro lro0_n[MAX_LRO_SESSIONS];
unsigned long clubbed_frms_cnt;
unsigned long sending_both;
u8 lro;
spinlock_t rx_lock;
atomic_t isr_cnt;
u64 *ufo_in_band_v;
-#define VPD_PRODUCT_NAME_LEN 50
- u8 product_name[VPD_PRODUCT_NAME_LEN];
+#define VPD_STRING_LEN 80
+ u8 product_name[VPD_STRING_LEN];
+ u8 serial_num[VPD_STRING_LEN];
};
#define RESET_ERROR 1;
static int init_shared_mem(struct s2io_nic *sp);
static void free_shared_mem(struct s2io_nic *sp);
static int init_nic(struct s2io_nic *nic);
-static void rx_intr_handler(ring_info_t *ring_data);
-static void tx_intr_handler(fifo_info_t *fifo_data);
+static void rx_intr_handler(struct ring_info *ring_data);
+static void tx_intr_handler(struct fifo_info *fifo_data);
static void alarm_intr_handler(struct s2io_nic *sp);
static int s2io_starter(void);
+static void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
-static int rx_osm_handler(ring_info_t *ring_data, RxD_t * rxdp);
-static void s2io_link(nic_t * sp, int link);
-#if defined(CONFIG_S2IO_NAPI)
+static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
+static void s2io_link(struct s2io_nic * sp, int link);
+static void s2io_reset(struct s2io_nic * sp);
static int s2io_poll(struct net_device *dev, int *budget);
-#endif
-static void s2io_init_pci(nic_t * sp);
+static void s2io_init_pci(struct s2io_nic * sp);
static int s2io_set_mac_addr(struct net_device *dev, u8 * addr);
static void s2io_alarm_handle(unsigned long data);
-static int s2io_enable_msi(nic_t *nic);
+static int s2io_enable_msi(struct s2io_nic *nic);
static irqreturn_t s2io_msi_handle(int irq, void *dev_id);
static irqreturn_t
s2io_msix_ring_handle(int irq, void *dev_id);
static irqreturn_t
s2io_msix_fifo_handle(int irq, void *dev_id);
static irqreturn_t s2io_isr(int irq, void *dev_id);
-static int verify_xena_quiescence(nic_t *sp, u64 val64, int flag);
+static int verify_xena_quiescence(struct s2io_nic *sp);
static const struct ethtool_ops netdev_ethtool_ops;
static void s2io_set_link(struct work_struct *work);
-static int s2io_set_swapper(nic_t * sp);
-static void s2io_card_down(nic_t *nic);
-static int s2io_card_up(nic_t *nic);
+static int s2io_set_swapper(struct s2io_nic * sp);
+static void s2io_card_down(struct s2io_nic *nic);
+static int s2io_card_up(struct s2io_nic *nic);
static int get_xena_rev_id(struct pci_dev *pdev);
-static void restore_xmsi_data(nic_t *nic);
+static int wait_for_cmd_complete(void *addr, u64 busy_bit);
+static int s2io_add_isr(struct s2io_nic * sp);
+static void s2io_rem_isr(struct s2io_nic * sp);
+
+static void restore_xmsi_data(struct s2io_nic *nic);
-static int s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, lro_t **lro, RxD_t *rxdp, nic_t *sp);
-static void clear_lro_session(lro_t *lro);
+static int
+s2io_club_tcp_session(u8 *buffer, u8 **tcp, u32 *tcp_len, struct lro **lro,
+ struct RxD_t *rxdp, struct s2io_nic *sp);
+static void clear_lro_session(struct lro *lro);
static void queue_rx_frame(struct sk_buff *skb);
-static void update_L3L4_header(nic_t *sp, lro_t *lro);
-static void lro_append_pkt(nic_t *sp, lro_t *lro, struct sk_buff *skb, u32 tcp_len);
+static void update_L3L4_header(struct s2io_nic *sp, struct lro *lro);
+static void lro_append_pkt(struct s2io_nic *sp, struct lro *lro,
+ struct sk_buff *skb, u32 tcp_len);
#define s2io_tcp_mss(skb) skb_shinfo(skb)->gso_size
#define s2io_udp_mss(skb) skb_shinfo(skb)->gso_size
--- /dev/null
+/* Silan SC92031 PCI Fast Ethernet Adapter driver
+ *
+ * Based on vendor drivers:
+ * Silan Fast Ethernet Netcard Driver:
+ * MODULE_AUTHOR ("gaoyonghong");
+ * MODULE_DESCRIPTION ("SILAN Fast Ethernet driver");
+ * MODULE_LICENSE("GPL");
+ * 8139D Fast Ethernet driver:
+ * (C) 2002 by gaoyonghong
+ * MODULE_AUTHOR ("gaoyonghong");
+ * MODULE_DESCRIPTION ("Rsltek 8139D PCI Fast Ethernet Adapter driver");
+ * MODULE_LICENSE("GPL");
+ * Both are almost identical and seem to be based on pci-skeleton.c
+ *
+ * Rewritten for 2.6 by Cesar Eduardo Barros
+ */
+
+/* Note about set_mac_address: I don't know how to change the hardware
+ * matching, so you need to enable IFF_PROMISC when using it.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ethtool.h>
+#include <linux/crc32.h>
+
+#include <asm/irq.h>
+
+#define PCI_VENDOR_ID_SILAN 0x1904
+#define PCI_DEVICE_ID_SILAN_SC92031 0x2031
+#define PCI_DEVICE_ID_SILAN_8139D 0x8139
+
+#define SC92031_NAME "sc92031"
+#define SC92031_DESCRIPTION "Silan SC92031 PCI Fast Ethernet Adapter driver"
+#define SC92031_VERSION "2.0c"
+
+/* BAR 0 is MMIO, BAR 1 is PIO */
+#ifndef SC92031_USE_BAR
+#define SC92031_USE_BAR 0
+#endif
+
+/* Maximum number of multicast addresses to filter (vs. Rx-all-multicast). */
+static int multicast_filter_limit = 64;
+module_param(multicast_filter_limit, int, 0);
+MODULE_PARM_DESC(multicast_filter_limit,
+ "Maximum number of filtered multicast addresses");
+
+static int media;
+module_param(media, int, 0);
+MODULE_PARM_DESC(media, "Media type (0x00 = autodetect,"
+ " 0x01 = 10M half, 0x02 = 10M full,"
+ " 0x04 = 100M half, 0x08 = 100M full)");
+
+/* Size of the in-memory receive ring. */
+#define RX_BUF_LEN_IDX 3 /* 0==8K, 1==16K, 2==32K, 3==64K ,4==128K*/
+#define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX)
+
+/* Number of Tx descriptor registers. */
+#define NUM_TX_DESC 4
+
+/* max supported ethernet frame size -- must be at least (dev->mtu+14+4).*/
+#define MAX_ETH_FRAME_SIZE 1536
+
+/* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */
+#define TX_BUF_SIZE MAX_ETH_FRAME_SIZE
+#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC)
+
+/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */
+#define RX_FIFO_THRESH 7 /* Rx buffer level before first PCI xfer. */
+
+/* Time in jiffies before concluding the transmitter is hung. */
+#define TX_TIMEOUT (4*HZ)
+
+#define SILAN_STATS_NUM 2 /* number of ETHTOOL_GSTATS */
+
+/* media options */
+#define AUTOSELECT 0x00
+#define M10_HALF 0x01
+#define M10_FULL 0x02
+#define M100_HALF 0x04
+#define M100_FULL 0x08
+
+ /* Symbolic offsets to registers. */
+enum silan_registers {
+ Config0 = 0x00, // Config0
+ Config1 = 0x04, // Config1
+ RxBufWPtr = 0x08, // Rx buffer writer poiter
+ IntrStatus = 0x0C, // Interrupt status
+ IntrMask = 0x10, // Interrupt mask
+ RxbufAddr = 0x14, // Rx buffer start address
+ RxBufRPtr = 0x18, // Rx buffer read pointer
+ Txstatusall = 0x1C, // Transmit status of all descriptors
+ TxStatus0 = 0x20, // Transmit status (Four 32bit registers).
+ TxAddr0 = 0x30, // Tx descriptors (also four 32bit).
+ RxConfig = 0x40, // Rx configuration
+ MAC0 = 0x44, // Ethernet hardware address.
+ MAR0 = 0x4C, // Multicast filter.
+ RxStatus0 = 0x54, // Rx status
+ TxConfig = 0x5C, // Tx configuration
+ PhyCtrl = 0x60, // physical control
+ FlowCtrlConfig = 0x64, // flow control
+ Miicmd0 = 0x68, // Mii command0 register
+ Miicmd1 = 0x6C, // Mii command1 register
+ Miistatus = 0x70, // Mii status register
+ Timercnt = 0x74, // Timer counter register
+ TimerIntr = 0x78, // Timer interrupt register
+ PMConfig = 0x7C, // Power Manager configuration
+ CRC0 = 0x80, // Power Manager CRC ( Two 32bit regisers)
+ Wakeup0 = 0x88, // power Manager wakeup( Eight 64bit regiser)
+ LSBCRC0 = 0xC8, // power Manager LSBCRC(Two 32bit regiser)
+ TestD0 = 0xD0,
+ TestD4 = 0xD4,
+ TestD8 = 0xD8,
+};
+
+#define MII_BMCR 0 // Basic mode control register
+#define MII_BMSR 1 // Basic mode status register
+#define MII_JAB 16
+#define MII_OutputStatus 24
+
+#define BMCR_FULLDPLX 0x0100 // Full duplex
+#define BMCR_ANRESTART 0x0200 // Auto negotiation restart
+#define BMCR_ANENABLE 0x1000 // Enable auto negotiation
+#define BMCR_SPEED100 0x2000 // Select 100Mbps
+#define BMSR_LSTATUS 0x0004 // Link status
+#define PHY_16_JAB_ENB 0x1000
+#define PHY_16_PORT_ENB 0x1
+
+enum IntrStatusBits {
+ LinkFail = 0x80000000,
+ LinkOK = 0x40000000,
+ TimeOut = 0x20000000,
+ RxOverflow = 0x0040,
+ RxOK = 0x0020,
+ TxOK = 0x0001,
+ IntrBits = LinkFail|LinkOK|TimeOut|RxOverflow|RxOK|TxOK,
+};
+
+enum TxStatusBits {
+ TxCarrierLost = 0x20000000,
+ TxAborted = 0x10000000,
+ TxOutOfWindow = 0x08000000,
+ TxNccShift = 22,
+ EarlyTxThresShift = 16,
+ TxStatOK = 0x8000,
+ TxUnderrun = 0x4000,
+ TxOwn = 0x2000,
+};
+
+enum RxStatusBits {
+ RxStatesOK = 0x80000,
+ RxBadAlign = 0x40000,
+ RxHugeFrame = 0x20000,
+ RxSmallFrame = 0x10000,
+ RxCRCOK = 0x8000,
+ RxCrlFrame = 0x4000,
+ Rx_Broadcast = 0x2000,
+ Rx_Multicast = 0x1000,
+ RxAddrMatch = 0x0800,
+ MiiErr = 0x0400,
+};
+
+enum RxConfigBits {
+ RxFullDx = 0x80000000,
+ RxEnb = 0x40000000,
+ RxSmall = 0x20000000,
+ RxHuge = 0x10000000,
+ RxErr = 0x08000000,
+ RxAllphys = 0x04000000,
+ RxMulticast = 0x02000000,
+ RxBroadcast = 0x01000000,
+ RxLoopBack = (1 << 23) | (1 << 22),
+ LowThresholdShift = 12,
+ HighThresholdShift = 2,
+};
+
+enum TxConfigBits {
+ TxFullDx = 0x80000000,
+ TxEnb = 0x40000000,
+ TxEnbPad = 0x20000000,
+ TxEnbHuge = 0x10000000,
+ TxEnbFCS = 0x08000000,
+ TxNoBackOff = 0x04000000,
+ TxEnbPrem = 0x02000000,
+ TxCareLostCrs = 0x1000000,
+ TxExdCollNum = 0xf00000,
+ TxDataRate = 0x80000,
+};
+
+enum PhyCtrlconfigbits {
+ PhyCtrlAne = 0x80000000,
+ PhyCtrlSpd100 = 0x40000000,
+ PhyCtrlSpd10 = 0x20000000,
+ PhyCtrlPhyBaseAddr = 0x1f000000,
+ PhyCtrlDux = 0x800000,
+ PhyCtrlReset = 0x400000,
+};
+
+enum FlowCtrlConfigBits {
+ FlowCtrlFullDX = 0x80000000,
+ FlowCtrlEnb = 0x40000000,
+};
+
+enum Config0Bits {
+ Cfg0_Reset = 0x80000000,
+ Cfg0_Anaoff = 0x40000000,
+ Cfg0_LDPS = 0x20000000,
+};
+
+enum Config1Bits {
+ Cfg1_EarlyRx = 1 << 31,
+ Cfg1_EarlyTx = 1 << 30,
+
+ //rx buffer size
+ Cfg1_Rcv8K = 0x0,
+ Cfg1_Rcv16K = 0x1,
+ Cfg1_Rcv32K = 0x3,
+ Cfg1_Rcv64K = 0x7,
+ Cfg1_Rcv128K = 0xf,
+};
+
+enum MiiCmd0Bits {
+ Mii_Divider = 0x20000000,
+ Mii_WRITE = 0x400000,
+ Mii_READ = 0x200000,
+ Mii_SCAN = 0x100000,
+ Mii_Tamod = 0x80000,
+ Mii_Drvmod = 0x40000,
+ Mii_mdc = 0x20000,
+ Mii_mdoen = 0x10000,
+ Mii_mdo = 0x8000,
+ Mii_mdi = 0x4000,
+};
+
+enum MiiStatusBits {
+ Mii_StatusBusy = 0x80000000,
+};
+
+enum PMConfigBits {
+ PM_Enable = 1 << 31,
+ PM_LongWF = 1 << 30,
+ PM_Magic = 1 << 29,
+ PM_LANWake = 1 << 28,
+ PM_LWPTN = (1 << 27 | 1<< 26),
+ PM_LinkUp = 1 << 25,
+ PM_WakeUp = 1 << 24,
+};
+
+/* Locking rules:
+ * priv->lock protects most of the fields of priv and most of the
+ * hardware registers. It does not have to protect against softirqs
+ * between sc92031_disable_interrupts and sc92031_enable_interrupts;
+ * it also does not need to be used in ->open and ->stop while the
+ * device interrupts are off.
+ * Not having to protect against softirqs is very useful due to heavy
+ * use of mdelay() at _sc92031_reset.
+ * Functions prefixed with _sc92031_ must be called with the lock held;
+ * functions prefixed with sc92031_ must be called without the lock held.
+ * Use mmiowb() before unlocking if the hardware was written to.
+ */
+
+/* Locking rules for the interrupt:
+ * - the interrupt and the tasklet never run at the same time
+ * - neither run between sc92031_disable_interrupts and
+ * sc92031_enable_interrupt
+ */
+
+struct sc92031_priv {
+ spinlock_t lock;
+ /* iomap.h cookie */
+ void __iomem *port_base;
+ /* pci device structure */
+ struct pci_dev *pdev;
+ /* tasklet */
+ struct tasklet_struct tasklet;
+
+ /* CPU address of rx ring */
+ void *rx_ring;
+ /* PCI address of rx ring */
+ dma_addr_t rx_ring_dma_addr;
+ /* PCI address of rx ring read pointer */
+ dma_addr_t rx_ring_tail;
+
+ /* tx ring write index */
+ unsigned tx_head;
+ /* tx ring read index */
+ unsigned tx_tail;
+ /* CPU address of tx bounce buffer */
+ void *tx_bufs;
+ /* PCI address of tx bounce buffer */
+ dma_addr_t tx_bufs_dma_addr;
+
+ /* copies of some hardware registers */
+ u32 intr_status;
+ atomic_t intr_mask;
+ u32 rx_config;
+ u32 tx_config;
+ u32 pm_config;
+
+ /* copy of some flags from dev->flags */
+ unsigned int mc_flags;
+
+ /* for ETHTOOL_GSTATS */
+ u64 tx_timeouts;
+ u64 rx_loss;
+
+ /* for dev->get_stats */
+ long rx_value;
+ struct net_device_stats stats;
+};
+
+/* I don't know which registers can be safely read; however, I can guess
+ * MAC0 is one of them. */
+static inline void _sc92031_dummy_read(void __iomem *port_base)
+{
+ ioread32(port_base + MAC0);
+}
+
+static u32 _sc92031_mii_wait(void __iomem *port_base)
+{
+ u32 mii_status;
+
+ do {
+ udelay(10);
+ mii_status = ioread32(port_base + Miistatus);
+ } while (mii_status & Mii_StatusBusy);
+
+ return mii_status;
+}
+
+static u32 _sc92031_mii_cmd(void __iomem *port_base, u32 cmd0, u32 cmd1)
+{
+ iowrite32(Mii_Divider, port_base + Miicmd0);
+
+ _sc92031_mii_wait(port_base);
+
+ iowrite32(cmd1, port_base + Miicmd1);
+ iowrite32(Mii_Divider | cmd0, port_base + Miicmd0);
+
+ return _sc92031_mii_wait(port_base);
+}
+
+static void _sc92031_mii_scan(void __iomem *port_base)
+{
+ _sc92031_mii_cmd(port_base, Mii_SCAN, 0x1 << 6);
+}
+
+static u16 _sc92031_mii_read(void __iomem *port_base, unsigned reg)
+{
+ return _sc92031_mii_cmd(port_base, Mii_READ, reg << 6) >> 13;
+}
+
+static void _sc92031_mii_write(void __iomem *port_base, unsigned reg, u16 val)
+{
+ _sc92031_mii_cmd(port_base, Mii_WRITE, (reg << 6) | ((u32)val << 11));
+}
+
+static void sc92031_disable_interrupts(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ /* tell the tasklet/interrupt not to enable interrupts */
+ atomic_set(&priv->intr_mask, 0);
+ wmb();
+
+ /* stop interrupts */
+ iowrite32(0, port_base + IntrMask);
+ _sc92031_dummy_read(port_base);
+ mmiowb();
+
+ /* wait for any concurrent interrupt/tasklet to finish */
+ synchronize_irq(dev->irq);
+ tasklet_disable(&priv->tasklet);
+}
+
+static void sc92031_enable_interrupts(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ tasklet_enable(&priv->tasklet);
+
+ atomic_set(&priv->intr_mask, IntrBits);
+ wmb();
+
+ iowrite32(IntrBits, port_base + IntrMask);
+ mmiowb();
+}
+
+static void _sc92031_disable_tx_rx(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ priv->rx_config &= ~RxEnb;
+ priv->tx_config &= ~TxEnb;
+ iowrite32(priv->rx_config, port_base + RxConfig);
+ iowrite32(priv->tx_config, port_base + TxConfig);
+}
+
+static void _sc92031_enable_tx_rx(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ priv->rx_config |= RxEnb;
+ priv->tx_config |= TxEnb;
+ iowrite32(priv->rx_config, port_base + RxConfig);
+ iowrite32(priv->tx_config, port_base + TxConfig);
+}
+
+static void _sc92031_tx_clear(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ while (priv->tx_head - priv->tx_tail > 0) {
+ priv->tx_tail++;
+ priv->stats.tx_dropped++;
+ }
+ priv->tx_head = priv->tx_tail = 0;
+}
+
+static void _sc92031_set_mar(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 mar0 = 0, mar1 = 0;
+
+ if ((dev->flags & IFF_PROMISC)
+ || dev->mc_count > multicast_filter_limit
+ || (dev->flags & IFF_ALLMULTI))
+ mar0 = mar1 = 0xffffffff;
+ else if (dev->flags & IFF_MULTICAST) {
+ struct dev_mc_list *mc_list;
+
+ for (mc_list = dev->mc_list; mc_list; mc_list = mc_list->next) {
+ u32 crc;
+ unsigned bit = 0;
+
+ crc = ~ether_crc(ETH_ALEN, mc_list->dmi_addr);
+ crc >>= 24;
+
+ if (crc & 0x01) bit |= 0x02;
+ if (crc & 0x02) bit |= 0x01;
+ if (crc & 0x10) bit |= 0x20;
+ if (crc & 0x20) bit |= 0x10;
+ if (crc & 0x40) bit |= 0x08;
+ if (crc & 0x80) bit |= 0x04;
+
+ if (bit > 31)
+ mar0 |= 0x1 << (bit - 32);
+ else
+ mar1 |= 0x1 << bit;
+ }
+ }
+
+ iowrite32(mar0, port_base + MAR0);
+ iowrite32(mar1, port_base + MAR0 + 4);
+}
+
+static void _sc92031_set_rx_config(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ unsigned int old_mc_flags;
+ u32 rx_config_bits = 0;
+
+ old_mc_flags = priv->mc_flags;
+
+ if (dev->flags & IFF_PROMISC)
+ rx_config_bits |= RxSmall | RxHuge | RxErr | RxBroadcast
+ | RxMulticast | RxAllphys;
+
+ if (dev->flags & (IFF_ALLMULTI | IFF_MULTICAST))
+ rx_config_bits |= RxMulticast;
+
+ if (dev->flags & IFF_BROADCAST)
+ rx_config_bits |= RxBroadcast;
+
+ priv->rx_config &= ~(RxSmall | RxHuge | RxErr | RxBroadcast
+ | RxMulticast | RxAllphys);
+ priv->rx_config |= rx_config_bits;
+
+ priv->mc_flags = dev->flags & (IFF_PROMISC | IFF_ALLMULTI
+ | IFF_MULTICAST | IFF_BROADCAST);
+
+ if (netif_carrier_ok(dev) && priv->mc_flags != old_mc_flags)
+ iowrite32(priv->rx_config, port_base + RxConfig);
+}
+
+static bool _sc92031_check_media(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u16 bmsr;
+
+ bmsr = _sc92031_mii_read(port_base, MII_BMSR);
+ rmb();
+ if (bmsr & BMSR_LSTATUS) {
+ bool speed_100, duplex_full;
+ u32 flow_ctrl_config = 0;
+ u16 output_status = _sc92031_mii_read(port_base,
+ MII_OutputStatus);
+ _sc92031_mii_scan(port_base);
+
+ speed_100 = output_status & 0x2;
+ duplex_full = output_status & 0x4;
+
+ /* Initial Tx/Rx configuration */
+ priv->rx_config = (0x40 << LowThresholdShift) | (0x1c0 << HighThresholdShift);
+ priv->tx_config = 0x48800000;
+
+ /* NOTE: vendor driver had dead code here to enable tx padding */
+
+ if (!speed_100)
+ priv->tx_config |= 0x80000;
+
+ // configure rx mode
+ _sc92031_set_rx_config(dev);
+
+ if (duplex_full) {
+ priv->rx_config |= RxFullDx;
+ priv->tx_config |= TxFullDx;
+ flow_ctrl_config = FlowCtrlFullDX | FlowCtrlEnb;
+ } else {
+ priv->rx_config &= ~RxFullDx;
+ priv->tx_config &= ~TxFullDx;
+ }
+
+ _sc92031_set_mar(dev);
+ _sc92031_set_rx_config(dev);
+ _sc92031_enable_tx_rx(dev);
+ iowrite32(flow_ctrl_config, port_base + FlowCtrlConfig);
+
+ netif_carrier_on(dev);
+
+ if (printk_ratelimit())
+ printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
+ dev->name,
+ speed_100 ? "100" : "10",
+ duplex_full ? "full" : "half");
+ return true;
+ } else {
+ _sc92031_mii_scan(port_base);
+
+ netif_carrier_off(dev);
+
+ _sc92031_disable_tx_rx(dev);
+
+ if (printk_ratelimit())
+ printk(KERN_INFO "%s: link down\n", dev->name);
+ return false;
+ }
+}
+
+static void _sc92031_phy_reset(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 phy_ctrl;
+
+ phy_ctrl = ioread32(port_base + PhyCtrl);
+ phy_ctrl &= ~(PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10);
+ phy_ctrl |= PhyCtrlAne | PhyCtrlReset;
+
+ switch (media) {
+ default:
+ case AUTOSELECT:
+ phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
+ break;
+ case M10_HALF:
+ phy_ctrl |= PhyCtrlSpd10;
+ break;
+ case M10_FULL:
+ phy_ctrl |= PhyCtrlDux | PhyCtrlSpd10;
+ break;
+ case M100_HALF:
+ phy_ctrl |= PhyCtrlSpd100;
+ break;
+ case M100_FULL:
+ phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
+ break;
+ }
+
+ iowrite32(phy_ctrl, port_base + PhyCtrl);
+ mdelay(10);
+
+ phy_ctrl &= ~PhyCtrlReset;
+ iowrite32(phy_ctrl, port_base + PhyCtrl);
+ mdelay(1);
+
+ _sc92031_mii_write(port_base, MII_JAB,
+ PHY_16_JAB_ENB | PHY_16_PORT_ENB);
+ _sc92031_mii_scan(port_base);
+
+ netif_carrier_off(dev);
+ netif_stop_queue(dev);
+}
+
+static void _sc92031_reset(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ /* disable PM */
+ iowrite32(0, port_base + PMConfig);
+
+ /* soft reset the chip */
+ iowrite32(Cfg0_Reset, port_base + Config0);
+ mdelay(200);
+
+ iowrite32(0, port_base + Config0);
+ mdelay(10);
+
+ /* disable interrupts */
+ iowrite32(0, port_base + IntrMask);
+
+ /* clear multicast address */
+ iowrite32(0, port_base + MAR0);
+ iowrite32(0, port_base + MAR0 + 4);
+
+ /* init rx ring */
+ iowrite32(priv->rx_ring_dma_addr, port_base + RxbufAddr);
+ priv->rx_ring_tail = priv->rx_ring_dma_addr;
+
+ /* init tx ring */
+ _sc92031_tx_clear(dev);
+
+ /* clear old register values */
+ priv->intr_status = 0;
+ atomic_set(&priv->intr_mask, 0);
+ priv->rx_config = 0;
+ priv->tx_config = 0;
+ priv->mc_flags = 0;
+
+ /* configure rx buffer size */
+ /* NOTE: vendor driver had dead code here to enable early tx/rx */
+ iowrite32(Cfg1_Rcv64K, port_base + Config1);
+
+ _sc92031_phy_reset(dev);
+ _sc92031_check_media(dev);
+
+ /* calculate rx fifo overflow */
+ priv->rx_value = 0;
+
+ /* enable PM */
+ iowrite32(priv->pm_config, port_base + PMConfig);
+
+ /* clear intr register */
+ ioread32(port_base + IntrStatus);
+}
+
+static void _sc92031_tx_tasklet(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ unsigned old_tx_tail;
+ unsigned entry;
+ u32 tx_status;
+
+ old_tx_tail = priv->tx_tail;
+ while (priv->tx_head - priv->tx_tail > 0) {
+ entry = priv->tx_tail % NUM_TX_DESC;
+ tx_status = ioread32(port_base + TxStatus0 + entry * 4);
+
+ if (!(tx_status & (TxStatOK | TxUnderrun | TxAborted)))
+ break;
+
+ priv->tx_tail++;
+
+ if (tx_status & TxStatOK) {
+ priv->stats.tx_bytes += tx_status & 0x1fff;
+ priv->stats.tx_packets++;
+ /* Note: TxCarrierLost is always asserted at 100mbps. */
+ priv->stats.collisions += (tx_status >> 22) & 0xf;
+ }
+
+ if (tx_status & (TxOutOfWindow | TxAborted)) {
+ priv->stats.tx_errors++;
+
+ if (tx_status & TxAborted)
+ priv->stats.tx_aborted_errors++;
+
+ if (tx_status & TxCarrierLost)
+ priv->stats.tx_carrier_errors++;
+
+ if (tx_status & TxOutOfWindow)
+ priv->stats.tx_window_errors++;
+ }
+
+ if (tx_status & TxUnderrun)
+ priv->stats.tx_fifo_errors++;
+ }
+
+ if (priv->tx_tail != old_tx_tail)
+ if (netif_queue_stopped(dev))
+ netif_wake_queue(dev);
+}
+
+static void _sc92031_rx_tasklet_error(u32 rx_status,
+ struct sc92031_priv *priv, unsigned rx_size)
+{
+ if(rx_size > (MAX_ETH_FRAME_SIZE + 4) || rx_size < 16) {
+ priv->stats.rx_errors++;
+ priv->stats.rx_length_errors++;
+ }
+
+ if (!(rx_status & RxStatesOK)) {
+ priv->stats.rx_errors++;
+
+ if (rx_status & (RxHugeFrame | RxSmallFrame))
+ priv->stats.rx_length_errors++;
+
+ if (rx_status & RxBadAlign)
+ priv->stats.rx_frame_errors++;
+
+ if (!(rx_status & RxCRCOK))
+ priv->stats.rx_crc_errors++;
+ } else
+ priv->rx_loss++;
+}
+
+static void _sc92031_rx_tasklet(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ dma_addr_t rx_ring_head;
+ unsigned rx_len;
+ unsigned rx_ring_offset;
+ void *rx_ring = priv->rx_ring;
+
+ rx_ring_head = ioread32(port_base + RxBufWPtr);
+ rmb();
+
+ /* rx_ring_head is only 17 bits in the RxBufWPtr register.
+ * we need to change it to 32 bits physical address
+ */
+ rx_ring_head &= (dma_addr_t)(RX_BUF_LEN - 1);
+ rx_ring_head |= priv->rx_ring_dma_addr & ~(dma_addr_t)(RX_BUF_LEN - 1);
+ if (rx_ring_head < priv->rx_ring_dma_addr)
+ rx_ring_head += RX_BUF_LEN;
+
+ if (rx_ring_head >= priv->rx_ring_tail)
+ rx_len = rx_ring_head - priv->rx_ring_tail;
+ else
+ rx_len = RX_BUF_LEN - (priv->rx_ring_tail - rx_ring_head);
+
+ if (!rx_len)
+ return;
+
+ if (unlikely(rx_len > RX_BUF_LEN)) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "%s: rx packets length > rx buffer\n",
+ dev->name);
+ return;
+ }
+
+ rx_ring_offset = (priv->rx_ring_tail - priv->rx_ring_dma_addr) % RX_BUF_LEN;
+
+ while (rx_len) {
+ u32 rx_status;
+ unsigned rx_size, rx_size_align, pkt_size;
+ struct sk_buff *skb;
+
+ rx_status = le32_to_cpup((__le32 *)(rx_ring + rx_ring_offset));
+ rmb();
+
+ rx_size = rx_status >> 20;
+ rx_size_align = (rx_size + 3) & ~3; // for 4 bytes aligned
+ pkt_size = rx_size - 4; // Omit the four octet CRC from the length.
+
+ rx_ring_offset = (rx_ring_offset + 4) % RX_BUF_LEN;
+
+ if (unlikely(rx_status == 0
+ || rx_size > (MAX_ETH_FRAME_SIZE + 4)
+ || rx_size < 16
+ || !(rx_status & RxStatesOK))) {
+ _sc92031_rx_tasklet_error(rx_status, priv, rx_size);
+ break;
+ }
+
+ if (unlikely(rx_size_align + 4 > rx_len)) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
+ break;
+ }
+
+ rx_len -= rx_size_align + 4;
+
+ skb = dev_alloc_skb(pkt_size + NET_IP_ALIGN);
+ if (unlikely(!skb)) {
+ if (printk_ratelimit())
+ printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
+ dev->name, pkt_size);
+ goto next;
+ }
+
+ skb_reserve(skb, NET_IP_ALIGN);
+
+ if ((rx_ring_offset + pkt_size) > RX_BUF_LEN) {
+ memcpy(skb_put(skb, RX_BUF_LEN - rx_ring_offset),
+ rx_ring + rx_ring_offset, RX_BUF_LEN - rx_ring_offset);
+ memcpy(skb_put(skb, pkt_size - (RX_BUF_LEN - rx_ring_offset)),
+ rx_ring, pkt_size - (RX_BUF_LEN - rx_ring_offset));
+ } else {
+ memcpy(skb_put(skb, pkt_size), rx_ring + rx_ring_offset, pkt_size);
+ }
+
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ dev->last_rx = jiffies;
+ netif_rx(skb);
+
+ priv->stats.rx_bytes += pkt_size;
+ priv->stats.rx_packets++;
+
+ if (rx_status & Rx_Multicast)
+ priv->stats.multicast++;
+
+ next:
+ rx_ring_offset = (rx_ring_offset + rx_size_align) % RX_BUF_LEN;
+ }
+ mb();
+
+ priv->rx_ring_tail = rx_ring_head;
+ iowrite32(priv->rx_ring_tail, port_base + RxBufRPtr);
+}
+
+static void _sc92031_link_tasklet(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ if (_sc92031_check_media(dev))
+ netif_wake_queue(dev);
+ else {
+ netif_stop_queue(dev);
+ priv->stats.tx_carrier_errors++;
+ }
+}
+
+static void sc92031_tasklet(unsigned long data)
+{
+ struct net_device *dev = (struct net_device *)data;
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 intr_status, intr_mask;
+
+ intr_status = priv->intr_status;
+
+ spin_lock(&priv->lock);
+
+ if (unlikely(!netif_running(dev)))
+ goto out;
+
+ if (intr_status & TxOK)
+ _sc92031_tx_tasklet(dev);
+
+ if (intr_status & RxOK)
+ _sc92031_rx_tasklet(dev);
+
+ if (intr_status & RxOverflow)
+ priv->stats.rx_errors++;
+
+ if (intr_status & TimeOut) {
+ priv->stats.rx_errors++;
+ priv->stats.rx_length_errors++;
+ }
+
+ if (intr_status & (LinkFail | LinkOK))
+ _sc92031_link_tasklet(dev);
+
+out:
+ intr_mask = atomic_read(&priv->intr_mask);
+ rmb();
+
+ iowrite32(intr_mask, port_base + IntrMask);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+}
+
+static irqreturn_t sc92031_interrupt(int irq, void *dev_id)
+{
+ struct net_device *dev = dev_id;
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 intr_status, intr_mask;
+
+ /* mask interrupts before clearing IntrStatus */
+ iowrite32(0, port_base + IntrMask);
+ _sc92031_dummy_read(port_base);
+
+ intr_status = ioread32(port_base + IntrStatus);
+ if (unlikely(intr_status == 0xffffffff))
+ return IRQ_NONE; // hardware has gone missing
+
+ intr_status &= IntrBits;
+ if (!intr_status)
+ goto out_none;
+
+ priv->intr_status = intr_status;
+ tasklet_schedule(&priv->tasklet);
+
+ return IRQ_HANDLED;
+
+out_none:
+ intr_mask = atomic_read(&priv->intr_mask);
+ rmb();
+
+ iowrite32(intr_mask, port_base + IntrMask);
+ mmiowb();
+
+ return IRQ_NONE;
+}
+
+static struct net_device_stats *sc92031_get_stats(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ // FIXME I do not understand what is this trying to do.
+ if (netif_running(dev)) {
+ int temp;
+
+ spin_lock_bh(&priv->lock);
+
+ /* Update the error count. */
+ temp = (ioread32(port_base + RxStatus0) >> 16) & 0xffff;
+
+ if (temp == 0xffff) {
+ priv->rx_value += temp;
+ priv->stats.rx_fifo_errors = priv->rx_value;
+ } else {
+ priv->stats.rx_fifo_errors = temp + priv->rx_value;
+ }
+
+ spin_unlock_bh(&priv->lock);
+ }
+
+ return &priv->stats;
+}
+
+static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev)
+{
+ int err = 0;
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+
+ unsigned len;
+ unsigned entry;
+ u32 tx_status;
+
+ if (unlikely(skb->len > TX_BUF_SIZE)) {
+ err = -EMSGSIZE;
+ priv->stats.tx_dropped++;
+ goto out;
+ }
+
+ spin_lock_bh(&priv->lock);
+
+ if (unlikely(!netif_carrier_ok(dev))) {
+ err = -ENOLINK;
+ priv->stats.tx_dropped++;
+ goto out_unlock;
+ }
+
+ BUG_ON(priv->tx_head - priv->tx_tail >= NUM_TX_DESC);
+
+ entry = priv->tx_head++ % NUM_TX_DESC;
+
+ skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE);
+
+ len = skb->len;
+ if (unlikely(len < ETH_ZLEN)) {
+ memset(priv->tx_bufs + entry * TX_BUF_SIZE + len,
+ 0, ETH_ZLEN - len);
+ len = ETH_ZLEN;
+ }
+
+ wmb();
+
+ if (len < 100)
+ tx_status = len;
+ else if (len < 300)
+ tx_status = 0x30000 | len;
+ else
+ tx_status = 0x50000 | len;
+
+ iowrite32(priv->tx_bufs_dma_addr + entry * TX_BUF_SIZE,
+ port_base + TxAddr0 + entry * 4);
+ iowrite32(tx_status, port_base + TxStatus0 + entry * 4);
+ mmiowb();
+
+ dev->trans_start = jiffies;
+
+ if (priv->tx_head - priv->tx_tail >= NUM_TX_DESC)
+ netif_stop_queue(dev);
+
+out_unlock:
+ spin_unlock_bh(&priv->lock);
+
+out:
+ dev_kfree_skb(skb);
+
+ return err;
+}
+
+static int sc92031_open(struct net_device *dev)
+{
+ int err;
+ struct sc92031_priv *priv = netdev_priv(dev);
+ struct pci_dev *pdev = priv->pdev;
+
+ priv->rx_ring = pci_alloc_consistent(pdev, RX_BUF_LEN,
+ &priv->rx_ring_dma_addr);
+ if (unlikely(!priv->rx_ring)) {
+ err = -ENOMEM;
+ goto out_alloc_rx_ring;
+ }
+
+ priv->tx_bufs = pci_alloc_consistent(pdev, TX_BUF_TOT_LEN,
+ &priv->tx_bufs_dma_addr);
+ if (unlikely(!priv->tx_bufs)) {
+ err = -ENOMEM;
+ goto out_alloc_tx_bufs;
+ }
+ priv->tx_head = priv->tx_tail = 0;
+
+ err = request_irq(pdev->irq, sc92031_interrupt,
+ SA_SHIRQ, dev->name, dev);
+ if (unlikely(err < 0))
+ goto out_request_irq;
+
+ priv->pm_config = 0;
+
+ /* Interrupts already disabled by sc92031_stop or sc92031_probe */
+ spin_lock(&priv->lock);
+
+ _sc92031_reset(dev);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+ sc92031_enable_interrupts(dev);
+
+ if (netif_carrier_ok(dev))
+ netif_start_queue(dev);
+ else
+ netif_tx_disable(dev);
+
+ return 0;
+
+out_request_irq:
+ pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
+ priv->tx_bufs_dma_addr);
+out_alloc_tx_bufs:
+ pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
+ priv->rx_ring_dma_addr);
+out_alloc_rx_ring:
+ return err;
+}
+
+static int sc92031_stop(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ struct pci_dev *pdev = priv->pdev;
+
+ netif_tx_disable(dev);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ sc92031_disable_interrupts(dev);
+
+ spin_lock(&priv->lock);
+
+ _sc92031_disable_tx_rx(dev);
+ _sc92031_tx_clear(dev);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+
+ free_irq(pdev->irq, dev);
+ pci_free_consistent(pdev, TX_BUF_TOT_LEN, priv->tx_bufs,
+ priv->tx_bufs_dma_addr);
+ pci_free_consistent(pdev, RX_BUF_LEN, priv->rx_ring,
+ priv->rx_ring_dma_addr);
+
+ return 0;
+}
+
+static void sc92031_set_multicast_list(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ spin_lock_bh(&priv->lock);
+
+ _sc92031_set_mar(dev);
+ _sc92031_set_rx_config(dev);
+ mmiowb();
+
+ spin_unlock_bh(&priv->lock);
+}
+
+static void sc92031_tx_timeout(struct net_device *dev)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ /* Disable interrupts by clearing the interrupt mask.*/
+ sc92031_disable_interrupts(dev);
+
+ spin_lock(&priv->lock);
+
+ priv->tx_timeouts++;
+
+ _sc92031_reset(dev);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+
+ /* enable interrupts */
+ sc92031_enable_interrupts(dev);
+
+ if (netif_carrier_ok(dev))
+ netif_wake_queue(dev);
+}
+
+#ifdef CONFIG_NET_POLL_CONTROLLER
+static void sc92031_poll_controller(struct net_device *dev)
+{
+ disable_irq(dev->irq);
+ if (sc92031_interrupt(dev->irq, dev) != IRQ_NONE)
+ sc92031_tasklet((unsigned long)dev);
+ enable_irq(dev->irq);
+}
+#endif
+
+static int sc92031_ethtool_get_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u8 phy_address;
+ u32 phy_ctrl;
+ u16 output_status;
+
+ spin_lock_bh(&priv->lock);
+
+ phy_address = ioread32(port_base + Miicmd1) >> 27;
+ phy_ctrl = ioread32(port_base + PhyCtrl);
+
+ output_status = _sc92031_mii_read(port_base, MII_OutputStatus);
+ _sc92031_mii_scan(port_base);
+ mmiowb();
+
+ spin_unlock_bh(&priv->lock);
+
+ cmd->supported = SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full
+ | SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full
+ | SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII;
+
+ cmd->advertising = ADVERTISED_TP | ADVERTISED_MII;
+
+ if ((phy_ctrl & (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
+ == (PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10))
+ cmd->advertising |= ADVERTISED_Autoneg;
+
+ if ((phy_ctrl & PhyCtrlSpd10) == PhyCtrlSpd10)
+ cmd->advertising |= ADVERTISED_10baseT_Half;
+
+ if ((phy_ctrl & (PhyCtrlSpd10 | PhyCtrlDux))
+ == (PhyCtrlSpd10 | PhyCtrlDux))
+ cmd->advertising |= ADVERTISED_10baseT_Full;
+
+ if ((phy_ctrl & PhyCtrlSpd100) == PhyCtrlSpd100)
+ cmd->advertising |= ADVERTISED_100baseT_Half;
+
+ if ((phy_ctrl & (PhyCtrlSpd100 | PhyCtrlDux))
+ == (PhyCtrlSpd100 | PhyCtrlDux))
+ cmd->advertising |= ADVERTISED_100baseT_Full;
+
+ if (phy_ctrl & PhyCtrlAne)
+ cmd->advertising |= ADVERTISED_Autoneg;
+
+ cmd->speed = (output_status & 0x2) ? SPEED_100 : SPEED_10;
+ cmd->duplex = (output_status & 0x4) ? DUPLEX_FULL : DUPLEX_HALF;
+ cmd->port = PORT_MII;
+ cmd->phy_address = phy_address;
+ cmd->transceiver = XCVR_INTERNAL;
+ cmd->autoneg = (phy_ctrl & PhyCtrlAne) ? AUTONEG_ENABLE : AUTONEG_DISABLE;
+
+ return 0;
+}
+
+static int sc92031_ethtool_set_settings(struct net_device *dev,
+ struct ethtool_cmd *cmd)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 phy_ctrl;
+ u32 old_phy_ctrl;
+
+ if (!(cmd->speed == SPEED_10 || cmd->speed == SPEED_100))
+ return -EINVAL;
+ if (!(cmd->duplex == DUPLEX_HALF || cmd->duplex == DUPLEX_FULL))
+ return -EINVAL;
+ if (!(cmd->port == PORT_MII))
+ return -EINVAL;
+ if (!(cmd->phy_address == 0x1f))
+ return -EINVAL;
+ if (!(cmd->transceiver == XCVR_INTERNAL))
+ return -EINVAL;
+ if (!(cmd->autoneg == AUTONEG_DISABLE || cmd->autoneg == AUTONEG_ENABLE))
+ return -EINVAL;
+
+ if (cmd->autoneg == AUTONEG_ENABLE) {
+ if (!(cmd->advertising & (ADVERTISED_Autoneg
+ | ADVERTISED_100baseT_Full
+ | ADVERTISED_100baseT_Half
+ | ADVERTISED_10baseT_Full
+ | ADVERTISED_10baseT_Half)))
+ return -EINVAL;
+
+ phy_ctrl = PhyCtrlAne;
+
+ // FIXME: I'm not sure what the original code was trying to do
+ if (cmd->advertising & ADVERTISED_Autoneg)
+ phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100 | PhyCtrlSpd10;
+ if (cmd->advertising & ADVERTISED_100baseT_Full)
+ phy_ctrl |= PhyCtrlDux | PhyCtrlSpd100;
+ if (cmd->advertising & ADVERTISED_100baseT_Half)
+ phy_ctrl |= PhyCtrlSpd100;
+ if (cmd->advertising & ADVERTISED_10baseT_Full)
+ phy_ctrl |= PhyCtrlSpd10 | PhyCtrlDux;
+ if (cmd->advertising & ADVERTISED_10baseT_Half)
+ phy_ctrl |= PhyCtrlSpd10;
+ } else {
+ // FIXME: Whole branch guessed
+ phy_ctrl = 0;
+
+ if (cmd->speed == SPEED_10)
+ phy_ctrl |= PhyCtrlSpd10;
+ else /* cmd->speed == SPEED_100 */
+ phy_ctrl |= PhyCtrlSpd100;
+
+ if (cmd->duplex == DUPLEX_FULL)
+ phy_ctrl |= PhyCtrlDux;
+ }
+
+ spin_lock_bh(&priv->lock);
+
+ old_phy_ctrl = ioread32(port_base + PhyCtrl);
+ phy_ctrl |= old_phy_ctrl & ~(PhyCtrlAne | PhyCtrlDux
+ | PhyCtrlSpd100 | PhyCtrlSpd10);
+ if (phy_ctrl != old_phy_ctrl)
+ iowrite32(phy_ctrl, port_base + PhyCtrl);
+
+ spin_unlock_bh(&priv->lock);
+
+ return 0;
+}
+
+static void sc92031_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *drvinfo)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ struct pci_dev *pdev = priv->pdev;
+
+ strcpy(drvinfo->driver, SC92031_NAME);
+ strcpy(drvinfo->version, SC92031_VERSION);
+ strcpy(drvinfo->bus_info, pci_name(pdev));
+}
+
+static void sc92031_ethtool_get_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 pm_config;
+
+ spin_lock_bh(&priv->lock);
+ pm_config = ioread32(port_base + PMConfig);
+ spin_unlock_bh(&priv->lock);
+
+ // FIXME: Guessed
+ wolinfo->supported = WAKE_PHY | WAKE_MAGIC
+ | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+ wolinfo->wolopts = 0;
+
+ if (pm_config & PM_LinkUp)
+ wolinfo->wolopts |= WAKE_PHY;
+
+ if (pm_config & PM_Magic)
+ wolinfo->wolopts |= WAKE_MAGIC;
+
+ if (pm_config & PM_WakeUp)
+ // FIXME: Guessed
+ wolinfo->wolopts |= WAKE_UCAST | WAKE_MCAST | WAKE_BCAST;
+}
+
+static int sc92031_ethtool_set_wol(struct net_device *dev,
+ struct ethtool_wolinfo *wolinfo)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u32 pm_config;
+
+ spin_lock_bh(&priv->lock);
+
+ pm_config = ioread32(port_base + PMConfig)
+ & ~(PM_LinkUp | PM_Magic | PM_WakeUp);
+
+ if (wolinfo->wolopts & WAKE_PHY)
+ pm_config |= PM_LinkUp;
+
+ if (wolinfo->wolopts & WAKE_MAGIC)
+ pm_config |= PM_Magic;
+
+ // FIXME: Guessed
+ if (wolinfo->wolopts & (WAKE_UCAST | WAKE_MCAST | WAKE_BCAST))
+ pm_config |= PM_WakeUp;
+
+ priv->pm_config = pm_config;
+ iowrite32(pm_config, port_base + PMConfig);
+ mmiowb();
+
+ spin_unlock_bh(&priv->lock);
+
+ return 0;
+}
+
+static int sc92031_ethtool_nway_reset(struct net_device *dev)
+{
+ int err = 0;
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem *port_base = priv->port_base;
+ u16 bmcr;
+
+ spin_lock_bh(&priv->lock);
+
+ bmcr = _sc92031_mii_read(port_base, MII_BMCR);
+ if (!(bmcr & BMCR_ANENABLE)) {
+ err = -EINVAL;
+ goto out;
+ }
+
+ _sc92031_mii_write(port_base, MII_BMCR, bmcr | BMCR_ANRESTART);
+
+out:
+ _sc92031_mii_scan(port_base);
+ mmiowb();
+
+ spin_unlock_bh(&priv->lock);
+
+ return err;
+}
+
+static const char sc92031_ethtool_stats_strings[SILAN_STATS_NUM][ETH_GSTRING_LEN] = {
+ "tx_timeout",
+ "rx_loss",
+};
+
+static void sc92031_ethtool_get_strings(struct net_device *dev,
+ u32 stringset, u8 *data)
+{
+ if (stringset == ETH_SS_STATS)
+ memcpy(data, sc92031_ethtool_stats_strings,
+ SILAN_STATS_NUM * ETH_GSTRING_LEN);
+}
+
+static int sc92031_ethtool_get_stats_count(struct net_device *dev)
+{
+ return SILAN_STATS_NUM;
+}
+
+static void sc92031_ethtool_get_ethtool_stats(struct net_device *dev,
+ struct ethtool_stats *stats, u64 *data)
+{
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ spin_lock_bh(&priv->lock);
+ data[0] = priv->tx_timeouts;
+ data[1] = priv->rx_loss;
+ spin_unlock_bh(&priv->lock);
+}
+
+static struct ethtool_ops sc92031_ethtool_ops = {
+ .get_settings = sc92031_ethtool_get_settings,
+ .set_settings = sc92031_ethtool_set_settings,
+ .get_drvinfo = sc92031_ethtool_get_drvinfo,
+ .get_wol = sc92031_ethtool_get_wol,
+ .set_wol = sc92031_ethtool_set_wol,
+ .nway_reset = sc92031_ethtool_nway_reset,
+ .get_link = ethtool_op_get_link,
+ .get_tx_csum = ethtool_op_get_tx_csum,
+ .get_sg = ethtool_op_get_sg,
+ .get_tso = ethtool_op_get_tso,
+ .get_strings = sc92031_ethtool_get_strings,
+ .get_stats_count = sc92031_ethtool_get_stats_count,
+ .get_ethtool_stats = sc92031_ethtool_get_ethtool_stats,
+ .get_perm_addr = ethtool_op_get_perm_addr,
+ .get_ufo = ethtool_op_get_ufo,
+};
+
+static int __devinit sc92031_probe(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ int err;
+ void __iomem* port_base;
+ struct net_device *dev;
+ struct sc92031_priv *priv;
+ u32 mac0, mac1;
+
+ err = pci_enable_device(pdev);
+ if (unlikely(err < 0))
+ goto out_enable_device;
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (unlikely(err < 0))
+ goto out_set_dma_mask;
+
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (unlikely(err < 0))
+ goto out_set_dma_mask;
+
+ err = pci_request_regions(pdev, SC92031_NAME);
+ if (unlikely(err < 0))
+ goto out_request_regions;
+
+ port_base = pci_iomap(pdev, SC92031_USE_BAR, 0);
+ if (unlikely(!port_base)) {
+ err = -EIO;
+ goto out_iomap;
+ }
+
+ dev = alloc_etherdev(sizeof(struct sc92031_priv));
+ if (unlikely(!dev)) {
+ err = -ENOMEM;
+ goto out_alloc_etherdev;
+ }
+
+ pci_set_drvdata(pdev, dev);
+
+#if SC92031_USE_BAR == 0
+ dev->mem_start = pci_resource_start(pdev, SC92031_USE_BAR);
+ dev->mem_end = pci_resource_end(pdev, SC92031_USE_BAR);
+#elif SC92031_USE_BAR == 1
+ dev->base_addr = pci_resource_start(pdev, SC92031_USE_BAR);
+#endif
+ dev->irq = pdev->irq;
+
+ /* faked with skb_copy_and_csum_dev */
+ dev->features = NETIF_F_SG | NETIF_F_HW_CSUM | NETIF_F_HIGHDMA;
+
+ dev->get_stats = sc92031_get_stats;
+ dev->ethtool_ops = &sc92031_ethtool_ops;
+ dev->hard_start_xmit = sc92031_start_xmit;
+ dev->watchdog_timeo = TX_TIMEOUT;
+ dev->open = sc92031_open;
+ dev->stop = sc92031_stop;
+ dev->set_multicast_list = sc92031_set_multicast_list;
+ dev->tx_timeout = sc92031_tx_timeout;
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ dev->poll_controller = sc92031_poll_controller;
+#endif
+
+ priv = netdev_priv(dev);
+ spin_lock_init(&priv->lock);
+ priv->port_base = port_base;
+ priv->pdev = pdev;
+ tasklet_init(&priv->tasklet, sc92031_tasklet, (unsigned long)dev);
+ /* Fudge tasklet count so the call to sc92031_enable_interrupts at
+ * sc92031_open will work correctly */
+ tasklet_disable_nosync(&priv->tasklet);
+
+ /* PCI PM Wakeup */
+ iowrite32((~PM_LongWF & ~PM_LWPTN) | PM_Enable, port_base + PMConfig);
+
+ mac0 = ioread32(port_base + MAC0);
+ mac1 = ioread32(port_base + MAC0 + 4);
+ dev->dev_addr[0] = dev->perm_addr[0] = mac0 >> 24;
+ dev->dev_addr[1] = dev->perm_addr[1] = mac0 >> 16;
+ dev->dev_addr[2] = dev->perm_addr[2] = mac0 >> 8;
+ dev->dev_addr[3] = dev->perm_addr[3] = mac0;
+ dev->dev_addr[4] = dev->perm_addr[4] = mac1 >> 8;
+ dev->dev_addr[5] = dev->perm_addr[5] = mac1;
+
+ err = register_netdev(dev);
+ if (err < 0)
+ goto out_register_netdev;
+
+ return 0;
+
+out_register_netdev:
+ free_netdev(dev);
+out_alloc_etherdev:
+ pci_iounmap(pdev, port_base);
+out_iomap:
+ pci_release_regions(pdev);
+out_request_regions:
+out_set_dma_mask:
+ pci_disable_device(pdev);
+out_enable_device:
+ return err;
+}
+
+static void __devexit sc92031_remove(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct sc92031_priv *priv = netdev_priv(dev);
+ void __iomem* port_base = priv->port_base;
+
+ unregister_netdev(dev);
+ free_netdev(dev);
+ pci_iounmap(pdev, port_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+}
+
+static int sc92031_suspend(struct pci_dev *pdev, pm_message_t state)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ pci_save_state(pdev);
+
+ if (!netif_running(dev))
+ goto out;
+
+ netif_device_detach(dev);
+
+ /* Disable interrupts, stop Tx and Rx. */
+ sc92031_disable_interrupts(dev);
+
+ spin_lock(&priv->lock);
+
+ _sc92031_disable_tx_rx(dev);
+ _sc92031_tx_clear(dev);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+
+out:
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
+ return 0;
+}
+
+static int sc92031_resume(struct pci_dev *pdev)
+{
+ struct net_device *dev = pci_get_drvdata(pdev);
+ struct sc92031_priv *priv = netdev_priv(dev);
+
+ pci_restore_state(pdev);
+ pci_set_power_state(pdev, PCI_D0);
+
+ if (!netif_running(dev))
+ goto out;
+
+ /* Interrupts already disabled by sc92031_suspend */
+ spin_lock(&priv->lock);
+
+ _sc92031_reset(dev);
+ mmiowb();
+
+ spin_unlock(&priv->lock);
+ sc92031_enable_interrupts(dev);
+
+ netif_device_attach(dev);
+
+ if (netif_carrier_ok(dev))
+ netif_wake_queue(dev);
+ else
+ netif_tx_disable(dev);
+
+out:
+ return 0;
+}
+
+static struct pci_device_id sc92031_pci_device_id_table[] __devinitdata = {
+ { PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_SC92031) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SILAN, PCI_DEVICE_ID_SILAN_8139D) },
+ { 0, }
+};
+MODULE_DEVICE_TABLE(pci, sc92031_pci_device_id_table);
+
+static struct pci_driver sc92031_pci_driver = {
+ .name = SC92031_NAME,
+ .id_table = sc92031_pci_device_id_table,
+ .probe = sc92031_probe,
+ .remove = __devexit_p(sc92031_remove),
+ .suspend = sc92031_suspend,
+ .resume = sc92031_resume,
+};
+
+static int __init sc92031_init(void)
+{
+ printk(KERN_INFO SC92031_DESCRIPTION " " SC92031_VERSION "\n");
+ return pci_register_driver(&sc92031_pci_driver);
+}
+
+static void __exit sc92031_exit(void)
+{
+ pci_unregister_driver(&sc92031_pci_driver);
+}
+
+module_init(sc92031_init);
+module_exit(sc92031_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Cesar Eduardo Barros <cesarb@cesarb.net>");
+MODULE_DESCRIPTION(SC92031_DESCRIPTION);
+MODULE_VERSION(SC92031_VERSION);
+++ /dev/null
-/*
-net-3-driver for the SKNET MCA-based cards
-
-This is an extension to the Linux operating system, and is covered by the
-same GNU General Public License that covers that work.
-
-Copyright 1999 by Alfred Arnold (alfred@ccac.rwth-aachen.de,
- alfred.arnold@lancom.de)
-
-This driver is based both on the 3C523 driver and the SK_G16 driver.
-
-paper sources:
- 'PC Hardware: Aufbau, Funktionsweise, Programmierung' by
- Hans-Peter Messmer for the basic Microchannel stuff
-
- 'Linux Geraetetreiber' by Allesandro Rubini, Kalle Dalheimer
- for help on Ethernet driver programming
-
- 'Ethernet/IEEE 802.3 Family 1992 World Network Data Book/Handbook' by AMD
- for documentation on the AM7990 LANCE
-
- 'SKNET Personal Technisches Manual', Version 1.2 by Schneider&Koch
- for documentation on the Junior board
-
- 'SK-NET MC2+ Technical Manual", Version 1.1 by Schneider&Koch for
- documentation on the MC2 bord
-
- A big thank you to the S&K support for providing me so quickly with
- documentation!
-
- Also see http://www.syskonnect.com/
-
- Missing things:
-
- -> set debug level via ioctl instead of compile-time switches
- -> I didn't follow the development of the 2.1.x kernels, so my
- assumptions about which things changed with which kernel version
- are probably nonsense
-
-History:
- May 16th, 1999
- startup
- May 22st, 1999
- added private structure, methods
- begun building data structures in RAM
- May 23nd, 1999
- can receive frames, send frames
- May 24th, 1999
- modularized initialization of LANCE
- loadable as module
- still Tx problem :-(
- May 26th, 1999
- MC2 works
- support for multiple devices
- display media type for MC2+
- May 28th, 1999
- fixed problem in GetLANCE leaving interrupts turned off
- increase TX queue to 4 packets to improve send performance
- May 29th, 1999
- a few corrections in statistics, caught rcvr overruns
- reinitialization of LANCE/board in critical situations
- MCA info implemented
- implemented LANCE multicast filter
- Jun 6th, 1999
- additions for Linux 2.2
- Dec 25th, 1999
- unfortunately there seem to be newer MC2+ boards that react
- on IRQ 3/5/9/10 instead of 3/5/10/11, so we have to autoprobe
- in questionable cases...
- Dec 28th, 1999
- integrated patches from David Weinehall & Bill Wendling for 2.3
- kernels (isa_...functions). Things are defined in a way that
- it still works with 2.0.x 8-)
- Dec 30th, 1999
- added handling of the remaining interrupt conditions. That
- should cure the spurious hangs.
- Jan 30th, 2000
- newer kernels automatically probe more than one board, so the
- 'startslot' as a variable is also needed here
- June 1st, 2000
- added changes for recent 2.3 kernels
-
- *************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/time.h>
-#include <linux/mca-legacy.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/bitops.h>
-
-#include <asm/processor.h>
-#include <asm/io.h>
-
-#define _SK_MCA_DRIVER_
-#include "sk_mca.h"
-
-/* ------------------------------------------------------------------------
- * global static data - not more since we can handle multiple boards and
- * have to pack all state info into the device struct!
- * ------------------------------------------------------------------------ */
-
-static char *MediaNames[Media_Count] =
- { "10Base2", "10BaseT", "10Base5", "Unknown" };
-
-static unsigned char poly[] =
- { 1, 1, 1, 0, 1, 1, 0, 1, 1, 0, 1, 1, 1, 0, 0, 0,
- 1, 0, 0, 0, 0, 0, 1, 1, 0, 0, 1, 0, 0, 0, 0, 0
-};
-
-/* ------------------------------------------------------------------------
- * private subfunctions
- * ------------------------------------------------------------------------ */
-
-/* dump parts of shared memory - only needed during debugging */
-
-#ifdef DEBUG
-static void dumpmem(struct net_device *dev, u32 start, u32 len)
-{
- skmca_priv *priv = netdev_priv(dev);
- int z;
-
- for (z = 0; z < len; z++) {
- if ((z & 15) == 0)
- printk("%04x:", z);
- printk(" %02x", readb(priv->base + start + z));
- if ((z & 15) == 15)
- printk("\n");
- }
-}
-
-/* print exact time - ditto */
-
-static void PrTime(void)
-{
- struct timeval tv;
-
- do_gettimeofday(&tv);
- printk("%9d:%06d: ", tv.tv_sec, tv.tv_usec);
-}
-#endif
-
-/* deduce resources out of POS registers */
-
-static void __init getaddrs(int slot, int junior, int *base, int *irq,
- skmca_medium * medium)
-{
- u_char pos0, pos1, pos2;
-
- if (junior) {
- pos0 = mca_read_stored_pos(slot, 2);
- *base = ((pos0 & 0x0e) << 13) + 0xc0000;
- *irq = ((pos0 & 0x10) >> 4) + 10;
- *medium = Media_Unknown;
- } else {
- /* reset POS 104 Bits 0+1 so the shared memory region goes to the
- configured area between 640K and 1M. Afterwards, enable the MC2.
- I really don't know what rode SK to do this... */
-
- mca_write_pos(slot, 4,
- mca_read_stored_pos(slot, 4) & 0xfc);
- mca_write_pos(slot, 2,
- mca_read_stored_pos(slot, 2) | 0x01);
-
- pos1 = mca_read_stored_pos(slot, 3);
- pos2 = mca_read_stored_pos(slot, 4);
- *base = ((pos1 & 0x07) << 14) + 0xc0000;
- switch (pos2 & 0x0c) {
- case 0:
- *irq = 3;
- break;
- case 4:
- *irq = 5;
- break;
- case 8:
- *irq = -10;
- break;
- case 12:
- *irq = -11;
- break;
- }
- *medium = (pos2 >> 6) & 3;
- }
-}
-
-/* check for both cards:
- When the MC2 is turned off, it was configured for more than 15MB RAM,
- is disabled and won't get detected using the standard probe. We
- therefore have to scan the slots manually :-( */
-
-static int __init dofind(int *junior, int firstslot)
-{
- int slot;
- unsigned int id;
-
- for (slot = firstslot; slot < MCA_MAX_SLOT_NR; slot++) {
- id = mca_read_stored_pos(slot, 0)
- + (((unsigned int) mca_read_stored_pos(slot, 1)) << 8);
-
- *junior = 0;
- if (id == SKNET_MCA_ID)
- return slot;
- *junior = 1;
- if (id == SKNET_JUNIOR_MCA_ID)
- return slot;
- }
- return MCA_NOTFOUND;
-}
-
-/* reset the whole board */
-
-static void ResetBoard(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- writeb(CTRL_RESET_ON, priv->ctrladdr);
- udelay(10);
- writeb(CTRL_RESET_OFF, priv->ctrladdr);
-}
-
-/* wait for LANCE interface to become not busy */
-
-static int WaitLANCE(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- int t = 0;
-
- while ((readb(priv->ctrladdr) & STAT_IO_BUSY) ==
- STAT_IO_BUSY) {
- udelay(1);
- if (++t > 1000) {
- printk("%s: LANCE access timeout", dev->name);
- return 0;
- }
- }
-
- return 1;
-}
-
-/* set LANCE register - must be atomic */
-
-static void SetLANCE(struct net_device *dev, u16 addr, u16 value)
-{
- skmca_priv *priv = netdev_priv(dev);
- unsigned long flags;
-
- /* disable interrupts */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* wait until no transfer is pending */
-
- WaitLANCE(dev);
-
- /* transfer register address to RAP */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr);
- writew(addr, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* transfer data to register */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_DATA, priv->ctrladdr);
- writew(value, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* reenable interrupts */
-
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-/* get LANCE register */
-
-static u16 GetLANCE(struct net_device *dev, u16 addr)
-{
- skmca_priv *priv = netdev_priv(dev);
- unsigned long flags;
- unsigned int res;
-
- /* disable interrupts */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* wait until no transfer is pending */
-
- WaitLANCE(dev);
-
- /* transfer register address to RAP */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_WRITE | CTRL_ADR_RAP, priv->ctrladdr);
- writew(addr, priv->ioregaddr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
-
- /* transfer data from register */
-
- writeb(CTRL_RESET_OFF | CTRL_RW_READ | CTRL_ADR_DATA, priv->ctrladdr);
- writeb(IOCMD_GO, priv->cmdaddr);
- udelay(1);
- WaitLANCE(dev);
- res = readw(priv->ioregaddr);
-
- /* reenable interrupts */
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- return res;
-}
-
-/* build up descriptors in shared RAM */
-
-static void InitDscrs(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- u32 bufaddr;
-
- /* Set up Tx descriptors. The board has only 16K RAM so bits 16..23
- are always 0. */
-
- bufaddr = RAM_DATABASE;
- {
- LANCE_TxDescr descr;
- int z;
-
- for (z = 0; z < TXCOUNT; z++) {
- descr.LowAddr = bufaddr;
- descr.Flags = 0;
- descr.Len = 0xf000;
- descr.Status = 0;
- memcpy_toio(priv->base + RAM_TXBASE +
- (z * sizeof(LANCE_TxDescr)), &descr,
- sizeof(LANCE_TxDescr));
- memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE);
- bufaddr += RAM_BUFSIZE;
- }
- }
-
- /* do the same for the Rx descriptors */
-
- {
- LANCE_RxDescr descr;
- int z;
-
- for (z = 0; z < RXCOUNT; z++) {
- descr.LowAddr = bufaddr;
- descr.Flags = RXDSCR_FLAGS_OWN;
- descr.MaxLen = -RAM_BUFSIZE;
- descr.Len = 0;
- memcpy_toio(priv->base + RAM_RXBASE +
- (z * sizeof(LANCE_RxDescr)), &descr,
- sizeof(LANCE_RxDescr));
- memset_io(priv->base + bufaddr, 0, RAM_BUFSIZE);
- bufaddr += RAM_BUFSIZE;
- }
- }
-}
-
-/* calculate the hash bit position for a given multicast address
- taken more or less directly from the AMD datasheet... */
-
-static void UpdateCRC(unsigned char *CRC, int bit)
-{
- int j;
-
- /* shift CRC one bit */
-
- memmove(CRC + 1, CRC, 32 * sizeof(unsigned char));
- CRC[0] = 0;
-
- /* if bit XOR controlbit = 1, set CRC = CRC XOR polynomial */
-
- if (bit ^ CRC[32])
- for (j = 0; j < 32; j++)
- CRC[j] ^= poly[j];
-}
-
-static unsigned int GetHash(char *address)
-{
- unsigned char CRC[33];
- int i, byte, hashcode;
-
- /* a multicast address has bit 0 in the first byte set */
-
- if ((address[0] & 1) == 0)
- return -1;
-
- /* initialize CRC */
-
- memset(CRC, 1, sizeof(CRC));
-
- /* loop through address bits */
-
- for (byte = 0; byte < 6; byte++)
- for (i = 0; i < 8; i++)
- UpdateCRC(CRC, (address[byte] >> i) & 1);
-
- /* hashcode is the 6 least significant bits of the CRC */
-
- hashcode = 0;
- for (i = 0; i < 6; i++)
- hashcode = (hashcode << 1) + CRC[i];
- return hashcode;
-}
-
-/* feed ready-built initialization block into LANCE */
-
-static void InitLANCE(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- /* build up descriptors. */
-
- InitDscrs(dev);
-
- /* next RX descriptor to be read is the first one. Since the LANCE
- will start from the beginning after initialization, we have to
- reset out pointers too. */
-
- priv->nextrx = 0;
-
- /* no TX descriptors active */
-
- priv->nexttxput = priv->nexttxdone = priv->txbusy = 0;
-
- /* set up the LANCE bus control register - constant for SKnet boards */
-
- SetLANCE(dev, LANCE_CSR3,
- CSR3_BSWAP_OFF | CSR3_ALE_LOW | CSR3_BCON_HOLD);
-
- /* write address of initialization block into LANCE */
-
- SetLANCE(dev, LANCE_CSR1, RAM_INITBASE & 0xffff);
- SetLANCE(dev, LANCE_CSR2, (RAM_INITBASE >> 16) & 0xff);
-
- /* we don't get ready until the LANCE has read the init block */
-
- netif_stop_queue(dev);
-
- /* let LANCE read the initialization block. LANCE is ready
- when we receive the corresponding interrupt. */
-
- SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_INIT);
-}
-
-/* stop the LANCE so we can reinitialize it */
-
-static void StopLANCE(struct net_device *dev)
-{
- /* can't take frames any more */
-
- netif_stop_queue(dev);
-
- /* disable interrupts, stop it */
-
- SetLANCE(dev, LANCE_CSR0, CSR0_STOP);
-}
-
-/* initialize card and LANCE for proper operation */
-
-static void InitBoard(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_InitBlock block;
-
- /* Lay out the shared RAM - first we create the init block for the LANCE.
- We do not overwrite it later because we need it again when we switch
- promiscous mode on/off. */
-
- block.Mode = 0;
- if (dev->flags & IFF_PROMISC)
- block.Mode |= LANCE_INIT_PROM;
- memcpy(block.PAdr, dev->dev_addr, 6);
- memset(block.LAdrF, 0, sizeof(block.LAdrF));
- block.RdrP = (RAM_RXBASE & 0xffffff) | (LRXCOUNT << 29);
- block.TdrP = (RAM_TXBASE & 0xffffff) | (LTXCOUNT << 29);
-
- memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block));
-
- /* initialize LANCE. Implicitly sets up other structures in RAM. */
-
- InitLANCE(dev);
-}
-
-/* deinitialize card and LANCE */
-
-static void DeinitBoard(struct net_device *dev)
-{
- /* stop LANCE */
-
- StopLANCE(dev);
-
- /* reset board */
-
- ResetBoard(dev);
-}
-
-/* probe for device's irq */
-
-static int __init ProbeIRQ(struct net_device *dev)
-{
- unsigned long imaskval, njiffies, irq;
- u16 csr0val;
-
- /* enable all interrupts */
-
- imaskval = probe_irq_on();
-
- /* initialize the board. Wait for interrupt 'Initialization done'. */
-
- ResetBoard(dev);
- InitBoard(dev);
-
- njiffies = jiffies + HZ;
- do {
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- while (((csr0val & CSR0_IDON) == 0) && (jiffies != njiffies));
-
- /* turn of interrupts again */
-
- irq = probe_irq_off(imaskval);
-
- /* if we found something, ack the interrupt */
-
- if (irq)
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_IDON);
-
- /* back to idle state */
-
- DeinitBoard(dev);
-
- return irq;
-}
-
-/* ------------------------------------------------------------------------
- * interrupt handler(s)
- * ------------------------------------------------------------------------ */
-
-/* LANCE has read initialization block -> start it */
-
-static u16 irqstart_handler(struct net_device *dev, u16 oldcsr0)
-{
- /* now we're ready to transmit */
-
- netif_wake_queue(dev);
-
- /* reset IDON bit, start LANCE */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_IDON | CSR0_STRT);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* did we lose blocks due to a FIFO overrun ? */
-
-static u16 irqmiss_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- /* update statistics */
-
- priv->stat.rx_fifo_errors++;
-
- /* reset MISS bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_MISS);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* receive interrupt */
-
-static u16 irqrx_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_RxDescr descr;
- unsigned int descraddr;
-
- /* run through queue until we reach a descriptor we do not own */
-
- descraddr = RAM_RXBASE + (priv->nextrx * sizeof(LANCE_RxDescr));
- while (1) {
- /* read descriptor */
- memcpy_fromio(&descr, priv->base + descraddr,
- sizeof(LANCE_RxDescr));
-
- /* if we reach a descriptor we do not own, we're done */
- if ((descr.Flags & RXDSCR_FLAGS_OWN) != 0)
- break;
-
-#ifdef DEBUG
- PrTime();
- printk("Receive packet on descr %d len %d\n", priv->nextrx,
- descr.Len);
-#endif
-
- /* erroneous packet ? */
- if ((descr.Flags & RXDSCR_FLAGS_ERR) != 0) {
- priv->stat.rx_errors++;
- if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0)
- priv->stat.rx_crc_errors++;
- else if ((descr.Flags & RXDSCR_FLAGS_CRC) != 0)
- priv->stat.rx_frame_errors++;
- else if ((descr.Flags & RXDSCR_FLAGS_OFLO) != 0)
- priv->stat.rx_fifo_errors++;
- }
-
- /* good packet ? */
- else {
- struct sk_buff *skb;
-
- skb = dev_alloc_skb(descr.Len + 2);
- if (skb == NULL)
- priv->stat.rx_dropped++;
- else {
- memcpy_fromio(skb_put(skb, descr.Len),
- priv->base +
- descr.LowAddr, descr.Len);
- skb->dev = dev;
- skb->protocol = eth_type_trans(skb, dev);
- skb->ip_summed = CHECKSUM_NONE;
- priv->stat.rx_packets++;
- priv->stat.rx_bytes += descr.Len;
- netif_rx(skb);
- dev->last_rx = jiffies;
- }
- }
-
- /* give descriptor back to LANCE */
- descr.Len = 0;
- descr.Flags |= RXDSCR_FLAGS_OWN;
-
- /* update descriptor in shared RAM */
- memcpy_toio(priv->base + descraddr, &descr,
- sizeof(LANCE_RxDescr));
-
- /* go to next descriptor */
- priv->nextrx++;
- descraddr += sizeof(LANCE_RxDescr);
- if (priv->nextrx >= RXCOUNT) {
- priv->nextrx = 0;
- descraddr = RAM_RXBASE;
- }
- }
-
- /* reset RINT bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_RINT);
- return GetLANCE(dev, LANCE_CSR0);
-}
-
-/* transmit interrupt */
-
-static u16 irqtx_handler(struct net_device *dev, u16 oldcsr0)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_TxDescr descr;
- unsigned int descraddr;
-
- /* check descriptors at most until no busy one is left */
-
- descraddr =
- RAM_TXBASE + (priv->nexttxdone * sizeof(LANCE_TxDescr));
- while (priv->txbusy > 0) {
- /* read descriptor */
- memcpy_fromio(&descr, priv->base + descraddr,
- sizeof(LANCE_TxDescr));
-
- /* if the LANCE still owns this one, we've worked out all sent packets */
- if ((descr.Flags & TXDSCR_FLAGS_OWN) != 0)
- break;
-
-#ifdef DEBUG
- PrTime();
- printk("Send packet done on descr %d\n", priv->nexttxdone);
-#endif
-
- /* update statistics */
- if ((descr.Flags & TXDSCR_FLAGS_ERR) == 0) {
- priv->stat.tx_packets++;
- priv->stat.tx_bytes++;
- } else {
- priv->stat.tx_errors++;
- if ((descr.Status & TXDSCR_STATUS_UFLO) != 0) {
- priv->stat.tx_fifo_errors++;
- InitLANCE(dev);
- }
- else
- if ((descr.Status & TXDSCR_STATUS_LCOL) !=
- 0) priv->stat.tx_window_errors++;
- else if ((descr.Status & TXDSCR_STATUS_LCAR) != 0)
- priv->stat.tx_carrier_errors++;
- else if ((descr.Status & TXDSCR_STATUS_RTRY) != 0)
- priv->stat.tx_aborted_errors++;
- }
-
- /* go to next descriptor */
- priv->nexttxdone++;
- descraddr += sizeof(LANCE_TxDescr);
- if (priv->nexttxdone >= TXCOUNT) {
- priv->nexttxdone = 0;
- descraddr = RAM_TXBASE;
- }
- priv->txbusy--;
- }
-
- /* reset TX interrupt bit */
-
- SetLANCE(dev, LANCE_CSR0, oldcsr0 | CSR0_TINT);
- oldcsr0 = GetLANCE(dev, LANCE_CSR0);
-
- /* at least one descriptor is freed. Therefore we can accept
- a new one */
- /* inform upper layers we're in business again */
-
- netif_wake_queue(dev);
-
- return oldcsr0;
-}
-
-/* general interrupt entry */
-
-static irqreturn_t irq_handler(int irq, void *device)
-{
- struct net_device *dev = (struct net_device *) device;
- u16 csr0val;
-
- /* read CSR0 to get interrupt cause */
-
- csr0val = GetLANCE(dev, LANCE_CSR0);
-
- /* in case we're not meant... */
-
- if ((csr0val & CSR0_INTR) == 0)
- return IRQ_NONE;
-
-#if 0
- set_bit(LINK_STATE_RXSEM, &dev->state);
-#endif
-
- /* loop through the interrupt bits until everything is clear */
-
- do {
- if ((csr0val & CSR0_IDON) != 0)
- csr0val = irqstart_handler(dev, csr0val);
- if ((csr0val & CSR0_RINT) != 0)
- csr0val = irqrx_handler(dev, csr0val);
- if ((csr0val & CSR0_MISS) != 0)
- csr0val = irqmiss_handler(dev, csr0val);
- if ((csr0val & CSR0_TINT) != 0)
- csr0val = irqtx_handler(dev, csr0val);
- if ((csr0val & CSR0_MERR) != 0) {
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_MERR);
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- if ((csr0val & CSR0_BABL) != 0) {
- SetLANCE(dev, LANCE_CSR0, csr0val | CSR0_BABL);
- csr0val = GetLANCE(dev, LANCE_CSR0);
- }
- }
- while ((csr0val & CSR0_INTR) != 0);
-
-#if 0
- clear_bit(LINK_STATE_RXSEM, &dev->state);
-#endif
- return IRQ_HANDLED;
-}
-
-/* ------------------------------------------------------------------------
- * driver methods
- * ------------------------------------------------------------------------ */
-
-/* MCA info */
-
-static int skmca_getinfo(char *buf, int slot, void *d)
-{
- int len = 0, i;
- struct net_device *dev = (struct net_device *) d;
- skmca_priv *priv;
-
- /* can't say anything about an uninitialized device... */
-
- if (dev == NULL)
- return len;
- priv = netdev_priv(dev);
-
- /* print info */
-
- len += sprintf(buf + len, "IRQ: %d\n", priv->realirq);
- len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start,
- dev->mem_end - 1);
- len +=
- sprintf(buf + len, "Transceiver: %s\n",
- MediaNames[priv->medium]);
- len += sprintf(buf + len, "Device: %s\n", dev->name);
- len += sprintf(buf + len, "MAC address:");
- for (i = 0; i < 6; i++)
- len += sprintf(buf + len, " %02x", dev->dev_addr[i]);
- buf[len++] = '\n';
- buf[len] = 0;
-
- return len;
-}
-
-/* open driver. Means also initialization and start of LANCE */
-
-static int skmca_open(struct net_device *dev)
-{
- int result;
- skmca_priv *priv = netdev_priv(dev);
-
- /* register resources - only necessary for IRQ */
- result =
- request_irq(priv->realirq, irq_handler,
- IRQF_SHARED | IRQF_SAMPLE_RANDOM, "sk_mca", dev);
- if (result != 0) {
- printk("%s: failed to register irq %d\n", dev->name,
- dev->irq);
- return result;
- }
- dev->irq = priv->realirq;
-
- /* set up the card and LANCE */
-
- InitBoard(dev);
-
- /* set up flags */
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-/* close driver. Shut down board and free allocated resources */
-
-static int skmca_close(struct net_device *dev)
-{
- /* turn off board */
- DeinitBoard(dev);
-
- /* release resources */
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
- dev->irq = 0;
-
- return 0;
-}
-
-/* transmit a block. */
-
-static int skmca_tx(struct sk_buff *skb, struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_TxDescr descr;
- unsigned int address;
- int tmplen, retval = 0;
- unsigned long flags;
-
- /* if we get called with a NULL descriptor, the Ethernet layer thinks
- our card is stuck an we should reset it. We'll do this completely: */
-
- if (skb == NULL) {
- DeinitBoard(dev);
- InitBoard(dev);
- return 0; /* don't try to free the block here ;-) */
- }
-
- /* is there space in the Tx queue ? If no, the upper layer gave us a
- packet in spite of us not being ready and is really in trouble.
- We'll do the dropping for him: */
- if (priv->txbusy >= TXCOUNT) {
- priv->stat.tx_dropped++;
- retval = -EIO;
- goto tx_done;
- }
-
- /* get TX descriptor */
- address = RAM_TXBASE + (priv->nexttxput * sizeof(LANCE_TxDescr));
- memcpy_fromio(&descr, priv->base + address, sizeof(LANCE_TxDescr));
-
- /* enter packet length as 2s complement - assure minimum length */
- tmplen = skb->len;
- if (tmplen < 60)
- tmplen = 60;
- descr.Len = 65536 - tmplen;
-
- /* copy filler into RAM - in case we're filling up...
- we're filling a bit more than necessary, but that doesn't harm
- since the buffer is far larger... */
- if (tmplen > skb->len) {
- char *fill = "NetBSD is a nice OS too! ";
- unsigned int destoffs = 0, l = strlen(fill);
-
- while (destoffs < tmplen) {
- memcpy_toio(priv->base + descr.LowAddr +
- destoffs, fill, l);
- destoffs += l;
- }
- }
-
- /* do the real data copying */
- memcpy_toio(priv->base + descr.LowAddr, skb->data, skb->len);
-
- /* hand descriptor over to LANCE - this is the first and last chunk */
- descr.Flags =
- TXDSCR_FLAGS_OWN | TXDSCR_FLAGS_STP | TXDSCR_FLAGS_ENP;
-
-#ifdef DEBUG
- PrTime();
- printk("Send packet on descr %d len %d\n", priv->nexttxput,
- skb->len);
-#endif
-
- /* one more descriptor busy */
-
- spin_lock_irqsave(&priv->lock, flags);
-
- priv->nexttxput++;
- if (priv->nexttxput >= TXCOUNT)
- priv->nexttxput = 0;
- priv->txbusy++;
-
- /* are we saturated ? */
-
- if (priv->txbusy >= TXCOUNT)
- netif_stop_queue(dev);
-
- /* write descriptor back to RAM */
- memcpy_toio(priv->base + address, &descr, sizeof(LANCE_TxDescr));
-
- /* if no descriptors were active, give the LANCE a hint to read it
- immediately */
-
- if (priv->txbusy == 0)
- SetLANCE(dev, LANCE_CSR0, CSR0_INEA | CSR0_TDMD);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- tx_done:
-
- dev_kfree_skb(skb);
-
- return retval;
-}
-
-/* return pointer to Ethernet statistics */
-
-static struct net_device_stats *skmca_stats(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
-
- return &(priv->stat);
-}
-
-/* switch receiver mode. We use the LANCE's multicast filter to prefilter
- multicast addresses. */
-
-static void skmca_set_multicast_list(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- LANCE_InitBlock block;
-
- /* first stop the LANCE... */
- StopLANCE(dev);
-
- /* ...then modify the initialization block... */
- memcpy_fromio(&block, priv->base + RAM_INITBASE, sizeof(block));
- if (dev->flags & IFF_PROMISC)
- block.Mode |= LANCE_INIT_PROM;
- else
- block.Mode &= ~LANCE_INIT_PROM;
-
- if (dev->flags & IFF_ALLMULTI) { /* get all multicasts */
- memset(block.LAdrF, 0xff, sizeof(block.LAdrF));
- } else { /* get selected/no multicasts */
-
- struct dev_mc_list *mptr;
- int code;
-
- memset(block.LAdrF, 0, sizeof(block.LAdrF));
- for (mptr = dev->mc_list; mptr != NULL; mptr = mptr->next) {
- code = GetHash(mptr->dmi_addr);
- block.LAdrF[(code >> 3) & 7] |= 1 << (code & 7);
- }
- }
-
- memcpy_toio(priv->base + RAM_INITBASE, &block, sizeof(block));
-
- /* ...then reinit LANCE with the correct flags */
- InitLANCE(dev);
-}
-
-/* ------------------------------------------------------------------------
- * hardware check
- * ------------------------------------------------------------------------ */
-
-static int startslot; /* counts through slots when probing multiple devices */
-
-static void cleanup_card(struct net_device *dev)
-{
- skmca_priv *priv = netdev_priv(dev);
- DeinitBoard(dev);
- if (dev->irq != 0)
- free_irq(dev->irq, dev);
- iounmap(priv->base);
- mca_mark_as_unused(priv->slot);
- mca_set_adapter_procfn(priv->slot, NULL, NULL);
-}
-
-struct net_device * __init skmca_probe(int unit)
-{
- struct net_device *dev;
- int force_detect = 0;
- int junior, slot, i;
- int base = 0, irq = 0;
- skmca_priv *priv;
- skmca_medium medium;
- int err;
-
- /* can't work without an MCA bus ;-) */
-
- if (MCA_bus == 0)
- return ERR_PTR(-ENODEV);
-
- dev = alloc_etherdev(sizeof(skmca_priv));
- if (!dev)
- return ERR_PTR(-ENOMEM);
-
- if (unit >= 0) {
- sprintf(dev->name, "eth%d", unit);
- netdev_boot_setup_check(dev);
- }
-
- SET_MODULE_OWNER(dev);
-
- /* start address of 1 --> forced detection */
-
- if (dev->mem_start == 1)
- force_detect = 1;
-
- /* search through slots */
-
- base = dev->mem_start;
- irq = dev->base_addr;
- for (slot = startslot; (slot = dofind(&junior, slot)) != -1; slot++) {
- /* deduce card addresses */
-
- getaddrs(slot, junior, &base, &irq, &medium);
-
- /* slot already in use ? */
-
- if (mca_is_adapter_used(slot))
- continue;
-
- /* were we looking for something different ? */
-
- if (dev->irq && dev->irq != irq)
- continue;
- if (dev->mem_start && dev->mem_start != base)
- continue;
-
- /* found something that matches */
-
- break;
- }
-
- /* nothing found ? */
-
- if (slot == -1) {
- free_netdev(dev);
- return (base || irq) ? ERR_PTR(-ENXIO) : ERR_PTR(-ENODEV);
- }
-
- /* make procfs entries */
-
- if (junior)
- mca_set_adapter_name(slot,
- "SKNET junior MC2 Ethernet Adapter");
- else
- mca_set_adapter_name(slot, "SKNET MC2+ Ethernet Adapter");
- mca_set_adapter_procfn(slot, (MCA_ProcFn) skmca_getinfo, dev);
-
- mca_mark_as_used(slot);
-
- /* announce success */
- printk("%s: SKNet %s adapter found in slot %d\n", dev->name,
- junior ? "Junior MC2" : "MC2+", slot + 1);
-
- priv = netdev_priv(dev);
- priv->base = ioremap(base, 0x4000);
- if (!priv->base) {
- mca_set_adapter_procfn(slot, NULL, NULL);
- mca_mark_as_unused(slot);
- free_netdev(dev);
- return ERR_PTR(-ENOMEM);
- }
-
- priv->slot = slot;
- priv->macbase = priv->base + 0x3fc0;
- priv->ioregaddr = priv->base + 0x3ff0;
- priv->ctrladdr = priv->base + 0x3ff2;
- priv->cmdaddr = priv->base + 0x3ff3;
- priv->medium = medium;
- memset(&priv->stat, 0, sizeof(struct net_device_stats));
- spin_lock_init(&priv->lock);
-
- /* set base + irq for this device (irq not allocated so far) */
- dev->irq = 0;
- dev->mem_start = base;
- dev->mem_end = base + 0x4000;
-
- /* autoprobe ? */
- if (irq < 0) {
- int nirq;
-
- printk
- ("%s: ambigous POS bit combination, must probe for IRQ...\n",
- dev->name);
- nirq = ProbeIRQ(dev);
- if (nirq <= 0)
- printk("%s: IRQ probe failed, assuming IRQ %d",
- dev->name, priv->realirq = -irq);
- else
- priv->realirq = nirq;
- } else
- priv->realirq = irq;
-
- /* set methods */
- dev->open = skmca_open;
- dev->stop = skmca_close;
- dev->hard_start_xmit = skmca_tx;
- dev->do_ioctl = NULL;
- dev->get_stats = skmca_stats;
- dev->set_multicast_list = skmca_set_multicast_list;
- dev->flags |= IFF_MULTICAST;
-
- /* copy out MAC address */
- for (i = 0; i < 6; i++)
- dev->dev_addr[i] = readb(priv->macbase + (i << 1));
-
- /* print config */
- printk("%s: IRQ %d, memory %#lx-%#lx, "
- "MAC address %02x:%02x:%02x:%02x:%02x:%02x.\n",
- dev->name, priv->realirq, dev->mem_start, dev->mem_end - 1,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]);
- printk("%s: %s medium\n", dev->name, MediaNames[priv->medium]);
-
- /* reset board */
-
- ResetBoard(dev);
-
- startslot = slot + 1;
-
- err = register_netdev(dev);
- if (err) {
- cleanup_card(dev);
- free_netdev(dev);
- dev = ERR_PTR(err);
- }
- return dev;
-}
-
-/* ------------------------------------------------------------------------
- * modularization support
- * ------------------------------------------------------------------------ */
-
-#ifdef MODULE
-MODULE_LICENSE("GPL");
-
-#define DEVMAX 5
-
-static struct net_device *moddevs[DEVMAX];
-
-int init_module(void)
-{
- int z;
-
- startslot = 0;
- for (z = 0; z < DEVMAX; z++) {
- struct net_device *dev = skmca_probe(-1);
- if (IS_ERR(dev))
- break;
- moddevs[z] = dev;
- }
- if (!z)
- return -EIO;
- return 0;
-}
-
-void cleanup_module(void)
-{
- int z;
-
- for (z = 0; z < DEVMAX; z++) {
- struct net_device *dev = moddevs[z];
- if (dev) {
- unregister_netdev(dev);
- cleanup_card(dev);
- free_netdev(dev);
- }
- }
-}
-#endif /* MODULE */
+++ /dev/null
-#ifndef _SK_MCA_INCLUDE_
-#define _SK_MCA_INCLUDE_
-
-#ifdef _SK_MCA_DRIVER_
-
-/* Adapter ID's */
-#define SKNET_MCA_ID 0x6afd
-#define SKNET_JUNIOR_MCA_ID 0x6be9
-
-/* media enumeration - defined in a way that it fits onto the MC2+'s
- POS registers... */
-
-typedef enum { Media_10Base2, Media_10BaseT,
- Media_10Base5, Media_Unknown, Media_Count
-} skmca_medium;
-
-/* private structure */
-typedef struct {
- unsigned int slot; /* MCA-Slot-# */
- void __iomem *base;
- void __iomem *macbase; /* base address of MAC address PROM */
- void __iomem *ioregaddr;/* address of I/O-register (Lo) */
- void __iomem *ctrladdr; /* address of control/stat register */
- void __iomem *cmdaddr; /* address of I/O-command register */
- int nextrx; /* index of next RX descriptor to
- be read */
- int nexttxput; /* index of next free TX descriptor */
- int nexttxdone; /* index of next TX descriptor to
- be finished */
- int txbusy; /* # of busy TX descriptors */
- struct net_device_stats stat; /* packet statistics */
- int realirq; /* memorizes actual IRQ, even when
- currently not allocated */
- skmca_medium medium; /* physical cannector */
- spinlock_t lock;
-} skmca_priv;
-
-/* card registers: control/status register bits */
-
-#define CTRL_ADR_DATA 0 /* Bit 0 = 0 ->access data register */
-#define CTRL_ADR_RAP 1 /* Bit 0 = 1 ->access RAP register */
-#define CTRL_RW_WRITE 0 /* Bit 1 = 0 ->write register */
-#define CTRL_RW_READ 2 /* Bit 1 = 1 ->read register */
-#define CTRL_RESET_ON 0 /* Bit 3 = 0 ->reset board */
-#define CTRL_RESET_OFF 8 /* Bit 3 = 1 ->no reset of board */
-
-#define STAT_ADR_DATA 0 /* Bit 0 of ctrl register read back */
-#define STAT_ADR_RAP 1
-#define STAT_RW_WRITE 0 /* Bit 1 of ctrl register read back */
-#define STAT_RW_READ 2
-#define STAT_RESET_ON 0 /* Bit 3 of ctrl register read back */
-#define STAT_RESET_OFF 8
-#define STAT_IRQ_ACT 0 /* interrupt pending */
-#define STAT_IRQ_NOACT 16 /* no interrupt pending */
-#define STAT_IO_NOBUSY 0 /* no transfer busy */
-#define STAT_IO_BUSY 32 /* transfer busy */
-
-/* I/O command register bits */
-
-#define IOCMD_GO 128 /* Bit 7 = 1 -> start register xfer */
-
-/* LANCE registers */
-
-#define LANCE_CSR0 0 /* Status/Control */
-
-#define CSR0_ERR 0x8000 /* general error flag */
-#define CSR0_BABL 0x4000 /* transmitter timeout */
-#define CSR0_CERR 0x2000 /* collision error */
-#define CSR0_MISS 0x1000 /* lost Rx block */
-#define CSR0_MERR 0x0800 /* memory access error */
-#define CSR0_RINT 0x0400 /* receiver interrupt */
-#define CSR0_TINT 0x0200 /* transmitter interrupt */
-#define CSR0_IDON 0x0100 /* initialization done */
-#define CSR0_INTR 0x0080 /* general interrupt flag */
-#define CSR0_INEA 0x0040 /* interrupt enable */
-#define CSR0_RXON 0x0020 /* receiver enabled */
-#define CSR0_TXON 0x0010 /* transmitter enabled */
-#define CSR0_TDMD 0x0008 /* force transmission now */
-#define CSR0_STOP 0x0004 /* stop LANCE */
-#define CSR0_STRT 0x0002 /* start LANCE */
-#define CSR0_INIT 0x0001 /* read initialization block */
-
-#define LANCE_CSR1 1 /* addr bit 0..15 of initialization */
-#define LANCE_CSR2 2 /* 16..23 block */
-
-#define LANCE_CSR3 3 /* Bus control */
-#define CSR3_BCON_HOLD 0 /* Bit 0 = 0 -> BM1,BM0,HOLD */
-#define CSR3_BCON_BUSRQ 1 /* Bit 0 = 1 -> BUSAK0,BYTE,BUSRQ */
-#define CSR3_ALE_HIGH 0 /* Bit 1 = 0 -> ALE asserted high */
-#define CSR3_ALE_LOW 2 /* Bit 1 = 1 -> ALE asserted low */
-#define CSR3_BSWAP_OFF 0 /* Bit 2 = 0 -> no byte swap */
-#define CSR3_BSWAP_ON 4 /* Bit 2 = 1 -> byte swap */
-
-/* LANCE structures */
-
-typedef struct { /* LANCE initialization block */
- u16 Mode; /* mode flags */
- u8 PAdr[6]; /* MAC address */
- u8 LAdrF[8]; /* Multicast filter */
- u32 RdrP; /* Receive descriptor */
- u32 TdrP; /* Transmit descriptor */
-} LANCE_InitBlock;
-
-/* Mode flags init block */
-
-#define LANCE_INIT_PROM 0x8000 /* enable promiscous mode */
-#define LANCE_INIT_INTL 0x0040 /* internal loopback */
-#define LANCE_INIT_DRTY 0x0020 /* disable retry */
-#define LANCE_INIT_COLL 0x0010 /* force collision */
-#define LANCE_INIT_DTCR 0x0008 /* disable transmit CRC */
-#define LANCE_INIT_LOOP 0x0004 /* loopback */
-#define LANCE_INIT_DTX 0x0002 /* disable transmitter */
-#define LANCE_INIT_DRX 0x0001 /* disable receiver */
-
-typedef struct { /* LANCE Tx descriptor */
- u16 LowAddr; /* bit 0..15 of address */
- u16 Flags; /* bit 16..23 of address + Flags */
- u16 Len; /* 2s complement of packet length */
- u16 Status; /* Result of transmission */
-} LANCE_TxDescr;
-
-#define TXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
-#define TXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
-#define TXDSCR_FLAGS_MORE 0x1000 /* more than one retry needed? */
-#define TXDSCR_FLAGS_ONE 0x0800 /* one retry? */
-#define TXDSCR_FLAGS_DEF 0x0400 /* transmission deferred? */
-#define TXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
-#define TXDSCR_FLAGS_ENP 0x0100 /* last packet in chain? */
-
-#define TXDSCR_STATUS_BUFF 0x8000 /* buffer error? */
-#define TXDSCR_STATUS_UFLO 0x4000 /* silo underflow during transmit? */
-#define TXDSCR_STATUS_LCOL 0x1000 /* late collision? */
-#define TXDSCR_STATUS_LCAR 0x0800 /* loss of carrier? */
-#define TXDSCR_STATUS_RTRY 0x0400 /* retry error? */
-
-typedef struct { /* LANCE Rx descriptor */
- u16 LowAddr; /* bit 0..15 of address */
- u16 Flags; /* bit 16..23 of address + Flags */
- u16 MaxLen; /* 2s complement of buffer length */
- u16 Len; /* packet length */
-} LANCE_RxDescr;
-
-#define RXDSCR_FLAGS_OWN 0x8000 /* LANCE owns descriptor */
-#define RXDSCR_FLAGS_ERR 0x4000 /* summary error flag */
-#define RXDSCR_FLAGS_FRAM 0x2000 /* framing error flag */
-#define RXDSCR_FLAGS_OFLO 0x1000 /* FIFO overflow? */
-#define RXDSCR_FLAGS_CRC 0x0800 /* CRC error? */
-#define RXDSCR_FLAGS_BUFF 0x0400 /* buffer error? */
-#define RXDSCR_FLAGS_STP 0x0200 /* first packet in chain? */
-#define RXDCSR_FLAGS_ENP 0x0100 /* last packet in chain? */
-
-/* RAM layout */
-
-#define TXCOUNT 4 /* length of TX descriptor queue */
-#define LTXCOUNT 2 /* log2 of it */
-#define RXCOUNT 4 /* length of RX descriptor queue */
-#define LRXCOUNT 2 /* log2 of it */
-
-#define RAM_INITBASE 0 /* LANCE init block */
-#define RAM_TXBASE 24 /* Start of TX descriptor queue */
-#define RAM_RXBASE \
-(RAM_TXBASE + (TXCOUNT * 8)) /* Start of RX descriptor queue */
-#define RAM_DATABASE \
-(RAM_RXBASE + (RXCOUNT * 8)) /* Start of data area for frames */
-#define RAM_BUFSIZE 1580 /* max. frame size - should never be
- reached */
-
-#endif /* _SK_MCA_DRIVER_ */
-
-#endif /* _SK_MCA_INCLUDE_ */
+++ /dev/null
-/******************************************************************************
- *
- * (C)Copyright 1998,1999 SysKonnect,
- * a business unit of Schneider & Koch & Co. Datensysteme GmbH.
- *
- * See the file "skfddi.c" for further information.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * The information in this file is provided "AS IS" without warranty.
- *
- ******************************************************************************/
-
-#ifndef lint
-static const char xID_sccs[] = "@(#)can.c 1.5 97/04/07 (C) SK " ;
-#endif
-
-/*
- * canonical bit order
- */
-const u_char canonical[256] = {
- 0x00,0x80,0x40,0xc0,0x20,0xa0,0x60,0xe0,
- 0x10,0x90,0x50,0xd0,0x30,0xb0,0x70,0xf0,
- 0x08,0x88,0x48,0xc8,0x28,0xa8,0x68,0xe8,
- 0x18,0x98,0x58,0xd8,0x38,0xb8,0x78,0xf8,
- 0x04,0x84,0x44,0xc4,0x24,0xa4,0x64,0xe4,
- 0x14,0x94,0x54,0xd4,0x34,0xb4,0x74,0xf4,
- 0x0c,0x8c,0x4c,0xcc,0x2c,0xac,0x6c,0xec,
- 0x1c,0x9c,0x5c,0xdc,0x3c,0xbc,0x7c,0xfc,
- 0x02,0x82,0x42,0xc2,0x22,0xa2,0x62,0xe2,
- 0x12,0x92,0x52,0xd2,0x32,0xb2,0x72,0xf2,
- 0x0a,0x8a,0x4a,0xca,0x2a,0xaa,0x6a,0xea,
- 0x1a,0x9a,0x5a,0xda,0x3a,0xba,0x7a,0xfa,
- 0x06,0x86,0x46,0xc6,0x26,0xa6,0x66,0xe6,
- 0x16,0x96,0x56,0xd6,0x36,0xb6,0x76,0xf6,
- 0x0e,0x8e,0x4e,0xce,0x2e,0xae,0x6e,0xee,
- 0x1e,0x9e,0x5e,0xde,0x3e,0xbe,0x7e,0xfe,
- 0x01,0x81,0x41,0xc1,0x21,0xa1,0x61,0xe1,
- 0x11,0x91,0x51,0xd1,0x31,0xb1,0x71,0xf1,
- 0x09,0x89,0x49,0xc9,0x29,0xa9,0x69,0xe9,
- 0x19,0x99,0x59,0xd9,0x39,0xb9,0x79,0xf9,
- 0x05,0x85,0x45,0xc5,0x25,0xa5,0x65,0xe5,
- 0x15,0x95,0x55,0xd5,0x35,0xb5,0x75,0xf5,
- 0x0d,0x8d,0x4d,0xcd,0x2d,0xad,0x6d,0xed,
- 0x1d,0x9d,0x5d,0xdd,0x3d,0xbd,0x7d,0xfd,
- 0x03,0x83,0x43,0xc3,0x23,0xa3,0x63,0xe3,
- 0x13,0x93,0x53,0xd3,0x33,0xb3,0x73,0xf3,
- 0x0b,0x8b,0x4b,0xcb,0x2b,0xab,0x6b,0xeb,
- 0x1b,0x9b,0x5b,0xdb,0x3b,0xbb,0x7b,0xfb,
- 0x07,0x87,0x47,0xc7,0x27,0xa7,0x67,0xe7,
- 0x17,0x97,0x57,0xd7,0x37,0xb7,0x77,0xf7,
- 0x0f,0x8f,0x4f,0xcf,0x2f,0xaf,0x6f,0xef,
- 0x1f,0x9f,0x5f,0xdf,0x3f,0xbf,0x7f,0xff
-} ;
-
-#ifdef MAKE_TABLE
-int byte_reverse(x)
-int x ;
-{
- int y = 0 ;
-
- if (x & 0x01)
- y |= 0x80 ;
- if (x & 0x02)
- y |= 0x40 ;
- if (x & 0x04)
- y |= 0x20 ;
- if (x & 0x08)
- y |= 0x10 ;
- if (x & 0x10)
- y |= 0x08 ;
- if (x & 0x20)
- y |= 0x04 ;
- if (x & 0x40)
- y |= 0x02 ;
- if (x & 0x80)
- y |= 0x01 ;
- return(y) ;
-}
-#endif
#include "h/smc.h"
#include "h/supern_2.h"
#include "h/skfbiinc.h"
+#include <linux/bitrev.h>
#ifndef lint
static const char ID_sccs[] = "@(#)drvfbi.c 1.63 99/02/11 (C) SK " ;
char PmdType ;
int i ;
- extern const u_char canonical[256] ;
-
#if (defined(ISA) || defined(MCA))
for (i = 0; i < 4 ;i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
- canonical[(inpw(PR_A(i+SA_MAC))&0xff)] ;
+ bitrev8(inpw(PR_A(i+SA_MAC)));
}
for (i = 4; i < 6; i++) {
smc->hw.fddi_phys_addr.a[i] =
- canonical[(inpw(PR_A(i+SA_MAC+PRA_OFF))&0xff)] ;
+ bitrev8(inpw(PR_A(i+SA_MAC+PRA_OFF)));
}
#endif
#ifdef EISA
*/
for (i = 0; i < 4 ;i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
- canonical[inp(PR_A(i+SA_MAC))] ;
+ bitrev8(inp(PR_A(i+SA_MAC)));
}
for (i = 4; i < 6; i++) {
smc->hw.fddi_phys_addr.a[i] =
- canonical[inp(PR_A(i+SA_MAC+PRA_OFF))] ;
+ bitrev8(inp(PR_A(i+SA_MAC+PRA_OFF)));
}
#endif
#ifdef PCI
for (i = 0; i < 6; i++) { /* read mac address from board */
smc->hw.fddi_phys_addr.a[i] =
- canonical[inp(ADDR(B2_MAC_0+i))] ;
+ bitrev8(inp(ADDR(B2_MAC_0+i)));
}
#endif
#ifndef PCI
if (mac_addr) {
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] = mac_addr[i] ;
- smc->hw.fddi_home_addr.a[i] = canonical[mac_addr[i]] ;
+ smc->hw.fddi_home_addr.a[i] = bitrev8(mac_addr[i]);
}
return ;
}
for (i = 0; i < 6 ;i++) {
smc->hw.fddi_canon_addr.a[i] =
- canonical[smc->hw.fddi_phys_addr.a[i]] ;
+ bitrev8(smc->hw.fddi_phys_addr.a[i]);
}
}
{
int i ;
- extern const u_char canonical[256] ;
-
- for (i = 0 ; i < 6 ; i++) {
- bia_addr->a[i] = canonical[smc->hw.fddi_phys_addr.a[i]] ;
- }
+ for (i = 0 ; i < 6 ; i++)
+ bia_addr->a[i] = bitrev8(smc->hw.fddi_phys_addr.a[i]);
}
void smt_start_watchdog(struct s_smc *smc)
#include "h/fddi.h"
#include "h/smc.h"
#include "h/supern_2.h"
-#include "can.c"
+#include <linux/bitrev.h>
#ifndef lint
static const char ID_sccs[] = "@(#)fplustm.c 1.32 99/02/23 (C) SK " ;
if (can) {
p = own->a ;
for (i = 0 ; i < 6 ; i++, p++)
- *p = canonical[*p] ;
+ *p = bitrev8(*p);
}
slot = NULL;
for (i = 0, tb = smc->hw.fp.mc.table ; i < FPMAX_MULTICAST ; i++, tb++){
#include "h/fddi.h"
#include "h/smc.h"
#include "h/smt_p.h"
+#include <linux/bitrev.h>
#define KERNEL
#include "h/smtstate.h"
static const char ID_sccs[] = "@(#)smt.c 2.43 98/11/23 (C) SK " ;
#endif
-extern const u_char canonical[256] ;
-
/*
* FC in SMbuf
*/
driver_get_bia(smc,&smc->mib.fddiSMTStationId.sid_node) ;
for (i = 0 ; i < 6 ; i ++) {
smc->mib.fddiSMTStationId.sid_node.a[i] =
- canonical[smc->mib.fddiSMTStationId.sid_node.a[i]] ;
+ bitrev8(smc->mib.fddiSMTStationId.sid_node.a[i]);
}
smc->mib.fddiSMTManufacturerData[0] =
smc->mib.fddiSMTStationId.sid_node.a[0] ;
SK_UNUSED(smc) ;
- for (i = len; i ; i--, data++) {
- *data = canonical[*(u_char *)data] ;
- }
+ for (i = len; i ; i--, data++)
+ *data = bitrev8(*data);
}
#endif
#include "skge.h"
#define DRV_NAME "skge"
-#define DRV_VERSION "1.9"
+#define DRV_VERSION "1.10"
#define PFX DRV_NAME " "
#define DEFAULT_TX_RING_SIZE 128
}
/* Wake on Lan only supported on Yukon chips with rev 1 or above */
-static int wol_supported(const struct skge_hw *hw)
+static u32 wol_supported(const struct skge_hw *hw)
{
- return !((hw->chip_id == CHIP_ID_GENESIS ||
- (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev == 0)));
+ if (hw->chip_id == CHIP_ID_YUKON && hw->chip_rev != 0)
+ return WAKE_MAGIC | WAKE_PHY;
+ else
+ return 0;
+}
+
+static u32 pci_wake_enabled(struct pci_dev *dev)
+{
+ int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ u16 value;
+
+ /* If device doesn't support PM Capabilities, but request is to disable
+ * wake events, it's a nop; otherwise fail */
+ if (!pm)
+ return 0;
+
+ pci_read_config_word(dev, pm + PCI_PM_PMC, &value);
+
+ value &= PCI_PM_CAP_PME_MASK;
+ value >>= ffs(PCI_PM_CAP_PME_MASK) - 1; /* First bit of mask */
+
+ return value != 0;
+}
+
+static void skge_wol_init(struct skge_port *skge)
+{
+ struct skge_hw *hw = skge->hw;
+ int port = skge->port;
+ enum pause_control save_mode;
+ u32 ctrl;
+
+ /* Bring hardware out of reset */
+ skge_write16(hw, B0_CTST, CS_RST_CLR);
+ skge_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ skge_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ skge_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100 skge_reset will re-enable on resume */
+ save_mode = skge->flow_control;
+ skge->flow_control = FLOW_MODE_SYMMETRIC;
+
+ ctrl = skge->advertising;
+ skge->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+
+ skge_phy_reset(skge);
+
+ skge->flow_control = save_mode;
+ skge->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ skge->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (skge->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (skge->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ skge_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* block receiver */
+ skge_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
}
static void skge_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
{
struct skge_port *skge = netdev_priv(dev);
- wol->supported = wol_supported(skge->hw) ? WAKE_MAGIC : 0;
- wol->wolopts = skge->wol ? WAKE_MAGIC : 0;
+ wol->supported = wol_supported(skge->hw);
+ wol->wolopts = skge->wol;
}
static int skge_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
struct skge_port *skge = netdev_priv(dev);
struct skge_hw *hw = skge->hw;
- if (wol->wolopts != WAKE_MAGIC && wol->wolopts != 0)
+ if (wol->wolopts & wol_supported(hw))
return -EOPNOTSUPP;
- if (wol->wolopts == WAKE_MAGIC && !wol_supported(hw))
- return -EOPNOTSUPP;
-
- skge->wol = wol->wolopts == WAKE_MAGIC;
-
- if (skge->wol) {
- memcpy_toio(hw->regs + WOL_MAC_ADDR, dev->dev_addr, ETH_ALEN);
-
- skge_write16(hw, WOL_CTRL_STAT,
- WOL_CTL_ENA_PME_ON_MAGIC_PKT |
- WOL_CTL_ENA_MAGIC_PKT_UNIT);
- } else
- skge_write16(hw, WOL_CTRL_STAT, WOL_CTL_DEFAULT);
-
+ skge->wol = wol->wolopts;
+ if (!netif_running(dev))
+ skge_wol_init(skge);
return 0;
}
size_t rx_size, tx_size;
int err;
+ if (!is_valid_ether_addr(dev->dev_addr))
+ return -EINVAL;
+
if (netif_msg_ifup(skge))
printk(KERN_INFO PFX "%s: enabling interface\n", dev->name);
BUG_ON(skge->dma & 7);
if ((u64)skge->dma >> 32 != ((u64) skge->dma + skge->mem_size) >> 32) {
- printk(KERN_ERR PFX "pci_alloc_consistent region crosses 4G boundary\n");
+ dev_err(&hw->pdev->dev, "pci_alloc_consistent region crosses 4G boundary\n");
err = -EINVAL;
goto free_pci_mem;
}
/* Handle device specific framing and timeout interrupts */
static void skge_error_irq(struct skge_hw *hw)
{
+ struct pci_dev *pdev = hw->pdev;
u32 hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hw->chip_id == CHIP_ID_GENESIS) {
}
if (hwstatus & IS_RAM_RD_PAR) {
- printk(KERN_ERR PFX "Ram read data parity error\n");
+ dev_err(&pdev->dev, "Ram read data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_RD_PERR);
}
if (hwstatus & IS_RAM_WR_PAR) {
- printk(KERN_ERR PFX "Ram write data parity error\n");
+ dev_err(&pdev->dev, "Ram write data parity error\n");
skge_write16(hw, B3_RI_CTRL, RI_CLR_WR_PERR);
}
skge_mac_parity(hw, 1);
if (hwstatus & IS_R1_PAR_ERR) {
- printk(KERN_ERR PFX "%s: receive queue parity error\n",
- hw->dev[0]->name);
+ dev_err(&pdev->dev, "%s: receive queue parity error\n",
+ hw->dev[0]->name);
skge_write32(hw, B0_R1_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & IS_R2_PAR_ERR) {
- printk(KERN_ERR PFX "%s: receive queue parity error\n",
- hw->dev[1]->name);
+ dev_err(&pdev->dev, "%s: receive queue parity error\n",
+ hw->dev[1]->name);
skge_write32(hw, B0_R2_CSR, CSR_IRQ_CL_P);
}
if (hwstatus & (IS_IRQ_MST_ERR|IS_IRQ_STAT)) {
u16 pci_status, pci_cmd;
- pci_read_config_word(hw->pdev, PCI_COMMAND, &pci_cmd);
- pci_read_config_word(hw->pdev, PCI_STATUS, &pci_status);
+ pci_read_config_word(pdev, PCI_COMMAND, &pci_cmd);
+ pci_read_config_word(pdev, PCI_STATUS, &pci_status);
- printk(KERN_ERR PFX "%s: PCI error cmd=%#x status=%#x\n",
- pci_name(hw->pdev), pci_cmd, pci_status);
+ dev_err(&pdev->dev, "PCI error cmd=%#x status=%#x\n",
+ pci_cmd, pci_status);
/* Write the error bits back to clear them. */
pci_status &= PCI_STATUS_ERROR_BITS;
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
- pci_write_config_word(hw->pdev, PCI_COMMAND,
+ pci_write_config_word(pdev, PCI_COMMAND,
pci_cmd | PCI_COMMAND_SERR | PCI_COMMAND_PARITY);
- pci_write_config_word(hw->pdev, PCI_STATUS, pci_status);
+ pci_write_config_word(pdev, PCI_STATUS, pci_status);
skge_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
/* if error still set then just ignore it */
hwstatus = skge_read32(hw, B0_HWE_ISRC);
if (hwstatus & IS_IRQ_STAT) {
- printk(KERN_INFO PFX "unable to clear error (so ignoring them)\n");
+ dev_warn(&hw->pdev->dev, "unable to clear error (so ignoring them)\n");
hw->intr_mask &= ~IS_HW_ERR;
}
}
hw->phy_addr = PHY_ADDR_BCOM;
break;
default:
- printk(KERN_ERR PFX "%s: unsupported phy type 0x%x\n",
- pci_name(hw->pdev), hw->phy_type);
+ dev_err(&hw->pdev->dev, "unsupported phy type 0x%x\n",
+ hw->phy_type);
return -EOPNOTSUPP;
}
break;
break;
default:
- printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
- pci_name(hw->pdev), hw->chip_id);
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
return -EOPNOTSUPP;
}
/* avoid boards with stuck Hardware error bits */
if ((skge_read32(hw, B0_ISRC) & IS_HW_ERR) &&
(skge_read32(hw, B0_HWE_ISRC) & IS_IRQ_SENSOR)) {
- printk(KERN_WARNING PFX "stuck hardware sensor bit\n");
+ dev_warn(&hw->pdev->dev, "stuck hardware sensor bit\n");
hw->intr_mask &= ~IS_HW_ERR;
}
struct net_device *dev = alloc_etherdev(sizeof(*skge));
if (!dev) {
- printk(KERN_ERR "skge etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed\n");
return NULL;
}
skge->duplex = -1;
skge->speed = -1;
skge->advertising = skge_supported_modes(hw);
+ skge->wol = pci_wake_enabled(hw->pdev) ? wol_supported(hw) : 0;
hw->dev[port] = dev;
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "%s cannot enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
goto err_out;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
goto err_out_disable_pdev;
}
}
if (err) {
- printk(KERN_ERR PFX "%s no usable DMA configuration\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_out_free_regions;
}
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
- printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
- printk(KERN_ERR PFX "%s: cannot map device registers\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot map device registers\n");
goto err_out_free_hw;
}
if (!dev)
goto err_out_led_off;
- if (!is_valid_ether_addr(dev->dev_addr)) {
- printk(KERN_ERR PFX "%s: bad (zero?) ethernet address in rom\n",
- pci_name(pdev));
- err = -EIO;
- goto err_out_free_netdev;
- }
+ /* Some motherboards are broken and has zero in ROM. */
+ if (!is_valid_ether_addr(dev->dev_addr))
+ dev_warn(&pdev->dev, "bad (zero?) ethernet address in rom\n");
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "%s: cannot register net device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot register net device\n");
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, skge_intr, IRQF_SHARED, dev->name, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
+ dev_err(&pdev->dev, "%s: cannot assign irq %d\n",
dev->name, pdev->irq);
goto err_out_unregister;
}
skge_show_addr(dev1);
else {
/* Failure to register second port need not be fatal */
- printk(KERN_WARNING PFX "register of second port failed\n");
+ dev_warn(&pdev->dev, "register of second port failed\n");
hw->dev[1] = NULL;
free_netdev(dev1);
}
}
#ifdef CONFIG_PM
+static int vaux_avail(struct pci_dev *pdev)
+{
+ int pm_cap;
+
+ pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
+ if (pm_cap) {
+ u16 ctl;
+ pci_read_config_word(pdev, pm_cap + PCI_PM_PMC, &ctl);
+ if (ctl & PCI_PM_CAP_AUX_POWER)
+ return 1;
+ }
+ return 0;
+}
+
+
static int skge_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct skge_hw *hw = pci_get_drvdata(pdev);
- int i, wol = 0;
+ int i, err, wol = 0;
+
+ err = pci_save_state(pdev);
+ if (err)
+ return err;
- pci_save_state(pdev);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+ struct skge_port *skge = netdev_priv(dev);
- if (netif_running(dev)) {
- struct skge_port *skge = netdev_priv(dev);
+ if (netif_running(dev))
+ skge_down(dev);
+ if (skge->wol)
+ skge_wol_init(skge);
- netif_carrier_off(dev);
- if (skge->wol)
- netif_stop_queue(dev);
- else
- skge_down(dev);
- wol |= skge->wol;
- }
- netif_device_detach(dev);
+ wol |= skge->wol;
}
+ if (wol && vaux_avail(pdev))
+ skge_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_ON | PC_VCC_OFF);
+
skge_write32(hw, B0_IMSK, 0);
pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
pci_set_power_state(pdev, pci_choose_state(pdev, state));
struct skge_hw *hw = pci_get_drvdata(pdev);
int i, err;
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err)
+ goto out;
+
+ err = pci_restore_state(pdev);
+ if (err)
+ goto out;
+
pci_enable_wake(pdev, PCI_D0, 0);
err = skge_reset(hw);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
- netif_device_attach(dev);
if (netif_running(dev)) {
err = skge_up(dev);
WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */
WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */
};
+#define WOL_REGS(port, x) (x + (port)*0x80)
enum {
WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */
WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */
};
+#define WOL_PATT_RAM_BASE(port) (WOL_PATT_RAM_1 + (port)*0x400)
enum {
BASE_XMAC_1 = 0x2000,/* XMAC 1 registers */
#include "sky2.h"
#define DRV_NAME "sky2"
-#define DRV_VERSION "1.10"
+#define DRV_VERSION "1.12"
#define PFX DRV_NAME " "
/*
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4b00) }, /* DGE-560T */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4001) }, /* DGE-550SX */
{ PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B02) }, /* DGE-560SX */
+ { PCI_DEVICE(PCI_VENDOR_ID_DLINK, 0x4B03) }, /* DGE-550T */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4340) }, /* 88E8021 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4341) }, /* 88E8022 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4342) }, /* 88E8061 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4366) }, /* 88EC036 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4367) }, /* 88EC032 */
{ PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4368) }, /* 88EC034 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4369) }, /* 88EC042 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436A) }, /* 88E8058 */
+ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x436B) }, /* 88E8071 */
{ 0 }
};
static const char *yukon2_name[] = {
"XL", /* 0xb3 */
"EC Ultra", /* 0xb4 */
- "UNKNOWN", /* 0xb5 */
+ "Extreme", /* 0xb5 */
"EC", /* 0xb6 */
"FE", /* 0xb7 */
};
return v;
}
-static void sky2_set_power_state(struct sky2_hw *hw, pci_power_t state)
-{
- u16 power_control;
- int vaux;
-
- pr_debug("sky2_set_power_state %d\n", state);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
-
- power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_PMC);
- vaux = (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL) &&
- (power_control & PCI_PM_CAP_PME_D3cold);
-
- power_control = sky2_pci_read16(hw, hw->pm_cap + PCI_PM_CTRL);
-
- power_control |= PCI_PM_CTRL_PME_STATUS;
- power_control &= ~(PCI_PM_CTRL_STATE_MASK);
- switch (state) {
- case PCI_D0:
- /* switch power to VCC (WA for VAUX problem) */
- sky2_write8(hw, B0_POWER_CTRL,
- PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
-
- /* disable Core Clock Division, */
- sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
-
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- /* enable bits are inverted */
- sky2_write8(hw, B2_Y2_CLK_GATE,
- Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
- Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
- Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
- else
- sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+static void sky2_power_on(struct sky2_hw *hw)
+{
+ /* switch power to VCC (WA for VAUX problem) */
+ sky2_write8(hw, B0_POWER_CTRL,
+ PC_VAUX_ENA | PC_VCC_ENA | PC_VAUX_OFF | PC_VCC_ON);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
- u32 reg1;
+ /* disable Core Clock Division, */
+ sky2_write32(hw, B2_Y2_CLK_CTRL, Y2_CLK_DIV_DIS);
- sky2_pci_write32(hw, PCI_DEV_REG3, 0);
- reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
- reg1 &= P_ASPM_CONTROL_MSK;
- sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
- sky2_pci_write32(hw, PCI_DEV_REG5, 0);
- }
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+ else
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- break;
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
+ u32 reg1;
- case PCI_D3hot:
- case PCI_D3cold:
- if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
- sky2_write8(hw, B2_Y2_CLK_GATE, 0);
- else
- /* enable bits are inverted */
- sky2_write8(hw, B2_Y2_CLK_GATE,
- Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
- Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
- Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
-
- /* switch power to VAUX */
- if (vaux && state != PCI_D3cold)
- sky2_write8(hw, B0_POWER_CTRL,
- (PC_VAUX_ENA | PC_VCC_ENA |
- PC_VAUX_ON | PC_VCC_OFF));
- break;
- default:
- printk(KERN_ERR PFX "Unknown power state %d\n", state);
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG4);
+ reg1 &= P_ASPM_CONTROL_MSK;
+ sky2_pci_write32(hw, PCI_DEV_REG4, reg1);
+ sky2_pci_write32(hw, PCI_DEV_REG5, 0);
}
+}
- sky2_pci_write16(hw, hw->pm_cap + PCI_PM_CTRL, power_control);
- sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+static void sky2_power_aux(struct sky2_hw *hw)
+{
+ if (hw->chip_id == CHIP_ID_YUKON_XL && hw->chip_rev > 1)
+ sky2_write8(hw, B2_Y2_CLK_GATE, 0);
+ else
+ /* enable bits are inverted */
+ sky2_write8(hw, B2_Y2_CLK_GATE,
+ Y2_PCI_CLK_LNK1_DIS | Y2_COR_CLK_LNK1_DIS |
+ Y2_CLK_GAT_LNK1_DIS | Y2_PCI_CLK_LNK2_DIS |
+ Y2_COR_CLK_LNK2_DIS | Y2_CLK_GAT_LNK2_DIS);
+
+ /* switch power to VAUX */
+ if (sky2_read16(hw, B0_CTST) & Y2_VAUX_AVAIL)
+ sky2_write8(hw, B0_POWER_CTRL,
+ (PC_VAUX_ENA | PC_VCC_ENA |
+ PC_VAUX_ON | PC_VCC_OFF));
}
static void sky2_gmac_reset(struct sky2_hw *hw, unsigned port)
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
u16 ctrl, ct1000, adv, pg, ledctrl, ledover, reg;
- if (sky2->autoneg == AUTONEG_ENABLE &&
- !(hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ if (sky2->autoneg == AUTONEG_ENABLE
+ && !(hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)) {
u16 ectrl = gm_phy_read(hw, port, PHY_MARV_EXT_CTRL);
ectrl &= ~(PHY_M_EC_M_DSC_MSK | PHY_M_EC_S_DSC_MSK |
/* enable automatic crossover */
ctrl |= PHY_M_PC_MDI_XMODE(PHY_M_PC_ENA_AUTO);
- if (sky2->autoneg == AUTONEG_ENABLE &&
- (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)) {
+ if (sky2->autoneg == AUTONEG_ENABLE
+ && (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)) {
ctrl &= ~PHY_M_PC_DSC_MSK;
ctrl |= PHY_M_PC_DSC(2) | PHY_M_PC_DOWN_S_ENA;
}
/* restore page register */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
break;
+
case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
/* select page 3 to access LED control register */
/* set page register to 0 */
gm_phy_write(hw, port, PHY_MARV_EXT_ADR, pg);
- } else {
+ } else if (hw->chip_id != CHIP_ID_YUKON_EX) {
gm_phy_write(hw, port, PHY_MARV_LED_CTRL, ledctrl);
if (sky2->autoneg == AUTONEG_DISABLE || sky2->speed == SPEED_100) {
spin_unlock_bh(&sky2->phy_lock);
}
+/* Put device in state to listen for Wake On Lan */
+static void sky2_wol_init(struct sky2_port *sky2)
+{
+ struct sky2_hw *hw = sky2->hw;
+ unsigned port = sky2->port;
+ enum flow_control save_mode;
+ u16 ctrl;
+ u32 reg1;
+
+ /* Bring hardware out of reset */
+ sky2_write16(hw, B0_CTST, CS_RST_CLR);
+ sky2_write16(hw, SK_REG(port, GMAC_LINK_CTRL), GMLC_RST_CLR);
+
+ sky2_write8(hw, SK_REG(port, GPHY_CTRL), GPC_RST_CLR);
+ sky2_write8(hw, SK_REG(port, GMAC_CTRL), GMC_RST_CLR);
+
+ /* Force to 10/100
+ * sky2_reset will re-enable on resume
+ */
+ save_mode = sky2->flow_mode;
+ ctrl = sky2->advertising;
+
+ sky2->advertising &= ~(ADVERTISED_1000baseT_Half|ADVERTISED_1000baseT_Full);
+ sky2->flow_mode = FC_NONE;
+ sky2_phy_power(hw, port, 1);
+ sky2_phy_reinit(sky2);
+
+ sky2->flow_mode = save_mode;
+ sky2->advertising = ctrl;
+
+ /* Set GMAC to no flow control and auto update for speed/duplex */
+ gma_write16(hw, port, GM_GP_CTRL,
+ GM_GPCR_FC_TX_DIS|GM_GPCR_TX_ENA|GM_GPCR_RX_ENA|
+ GM_GPCR_DUP_FULL|GM_GPCR_FC_RX_DIS|GM_GPCR_AU_FCT_DIS);
+
+ /* Set WOL address */
+ memcpy_toio(hw->regs + WOL_REGS(port, WOL_MAC_ADDR),
+ sky2->netdev->dev_addr, ETH_ALEN);
+
+ /* Turn on appropriate WOL control bits */
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), WOL_CTL_CLEAR_RESULT);
+ ctrl = 0;
+ if (sky2->wol & WAKE_PHY)
+ ctrl |= WOL_CTL_ENA_PME_ON_LINK_CHG|WOL_CTL_ENA_LINK_CHG_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_LINK_CHG|WOL_CTL_DIS_LINK_CHG_UNIT;
+
+ if (sky2->wol & WAKE_MAGIC)
+ ctrl |= WOL_CTL_ENA_PME_ON_MAGIC_PKT|WOL_CTL_ENA_MAGIC_PKT_UNIT;
+ else
+ ctrl |= WOL_CTL_DIS_PME_ON_MAGIC_PKT|WOL_CTL_DIS_MAGIC_PKT_UNIT;;
+
+ ctrl |= WOL_CTL_DIS_PME_ON_PATTERN|WOL_CTL_DIS_PATTERN_UNIT;
+ sky2_write16(hw, WOL_REGS(port, WOL_CTRL_STAT), ctrl);
+
+ /* Turn on legacy PCI-Express PME mode */
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
+ reg1 = sky2_pci_read32(hw, PCI_DEV_REG1);
+ reg1 |= PCI_Y2_PME_LEGACY;
+ sky2_pci_write32(hw, PCI_DEV_REG1, reg1);
+ sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_OFF);
+
+ /* block receiver */
+ sky2_write8(hw, SK_REG(port, RX_GMF_CTRL_T), GMF_RST_SET);
+
+}
+
static void sky2_mac_init(struct sky2_hw *hw, unsigned port)
{
struct sky2_port *sky2 = netdev_priv(hw->dev[port]);
sky2_write8(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_RST_CLR);
sky2_write16(hw, SK_REG(port, TX_GMF_CTRL_T), GMF_OPER_ON);
- if (hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX) {
sky2_write8(hw, SK_REG(port, RX_GMF_LP_THR), 768/8);
sky2_write8(hw, SK_REG(port, RX_GMF_UP_THR), 1024/8);
if (hw->dev[port]->mtu > ETH_DATA_LEN) {
if (unlikely(netif_msg_tx_done(sky2)))
printk(KERN_DEBUG "%s: tx done %u\n",
dev->name, idx);
+ sky2->net_stats.tx_packets++;
+ sky2->net_stats.tx_bytes += re->skb->len;
+
dev_kfree_skb_any(re->skb);
}
sky2_write8(hw, SK_REG(port, LNK_LED_REG),
LINKLED_ON | LINKLED_BLINK_OFF | LINKLED_LINKSYNC_OFF);
- if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U) {
+ if (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX) {
u16 pg = gm_phy_read(hw, port, PHY_MARV_EXT_ADR);
u16 led = PHY_M_LEDC_LOS_CTRL(1); /* link active */
sky2->duplex = (aux & PHY_M_PS_FULL_DUP) ? DUPLEX_FULL : DUPLEX_HALF;
/* Pause bits are offset (9..8) */
- if (hw->chip_id == CHIP_ID_YUKON_XL || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ if (hw->chip_id == CHIP_ID_YUKON_XL
+ || hw->chip_id == CHIP_ID_YUKON_EC_U
+ || hw->chip_id == CHIP_ID_YUKON_EX)
aux >>= 6;
sky2->flow_status = sky2_flow(aux & PHY_M_PS_RX_P_EN,
aux & PHY_M_PS_TX_P_EN);
if (sky2->duplex == DUPLEX_HALF && sky2->speed < SPEED_1000
- && hw->chip_id != CHIP_ID_YUKON_EC_U)
+ && !(hw->chip_id == CHIP_ID_YUKON_EC_U || hw->chip_id == CHIP_ID_YUKON_EX))
sky2->flow_status = FC_NONE;
if (aux & PHY_M_PS_RX_P_EN)
}
-/* Transmit timeout is only called if we are running, carries is up
+/* Transmit timeout is only called if we are running, carrier is up
* and tx queue is full (stopped).
+ * Called with netif_tx_lock held.
*/
static void sky2_tx_timeout(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
struct sky2_hw *hw = sky2->hw;
- unsigned txq = txqaddr[sky2->port];
- u16 report, done;
+ u32 imask;
if (netif_msg_timer(sky2))
printk(KERN_ERR PFX "%s: tx timeout\n", dev->name);
- report = sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX);
- done = sky2_read16(hw, Q_ADDR(txq, Q_DONE));
-
printk(KERN_DEBUG PFX "%s: transmit ring %u .. %u report=%u done=%u\n",
- dev->name,
- sky2->tx_cons, sky2->tx_prod, report, done);
+ dev->name, sky2->tx_cons, sky2->tx_prod,
+ sky2_read16(hw, sky2->port == 0 ? STAT_TXA1_RIDX : STAT_TXA2_RIDX),
+ sky2_read16(hw, Q_ADDR(txqaddr[sky2->port], Q_DONE)));
- if (report != done) {
- printk(KERN_INFO PFX "status burst pending (irq moderation?)\n");
-
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_STOP);
- sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
- } else if (report != sky2->tx_cons) {
- printk(KERN_INFO PFX "status report lost?\n");
+ imask = sky2_read32(hw, B0_IMSK); /* block IRQ in hw */
+ sky2_write32(hw, B0_IMSK, 0);
+ sky2_read32(hw, B0_IMSK);
- netif_tx_lock_bh(dev);
- sky2_tx_complete(sky2, report);
- netif_tx_unlock_bh(dev);
- } else {
- printk(KERN_INFO PFX "hardware hung? flushing\n");
+ netif_poll_disable(hw->dev[0]); /* stop NAPI poll */
+ synchronize_irq(hw->pdev->irq);
- sky2_write32(hw, Q_ADDR(txq, Q_CSR), BMU_STOP);
- sky2_write32(hw, Y2_QADDR(txq, PREF_UNIT_CTRL), PREF_UNIT_RST_SET);
+ netif_start_queue(dev); /* don't wakeup during flush */
+ sky2_tx_complete(sky2, sky2->tx_prod); /* Flush transmit queue */
- sky2_tx_clean(dev);
+ sky2_write32(hw, B0_IMSK, imask);
- sky2_qset(hw, txq);
- sky2_prefetch_init(hw, txq, sky2->tx_le_map, TX_RING_SIZE - 1);
- }
+ sky2_phy_reinit(sky2); /* this clears flow control etc */
}
static int sky2_change_mtu(struct net_device *dev, int new_mtu)
if (new_mtu < ETH_ZLEN || new_mtu > ETH_JUMBO_MTU)
return -EINVAL;
+ /* TSO on Yukon Ultra and MTU > 1500 not supported */
if (hw->chip_id == CHIP_ID_YUKON_EC_U && new_mtu > ETH_DATA_LEN)
- return -EINVAL;
+ dev->features &= ~NETIF_F_TSO;
if (!netif_running(dev)) {
dev->mtu = new_mtu;
goto force_update;
skb->protocol = eth_type_trans(skb, dev);
+ sky2->net_stats.rx_packets++;
+ sky2->net_stats.rx_bytes += skb->len;
dev->last_rx = jiffies;
#ifdef SKY2_VLAN_TAG_USED
pci_err = sky2_pci_read16(hw, PCI_STATUS);
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: pci hw error (0x%x)\n",
- pci_name(hw->pdev), pci_err);
+ dev_err(&hw->pdev->dev, "PCI hardware error (0x%x)\n",
+ pci_err);
sky2_write8(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
sky2_pci_write16(hw, PCI_STATUS,
pex_err = sky2_pci_read32(hw, PEX_UNC_ERR_STAT);
if (net_ratelimit())
- printk(KERN_ERR PFX "%s: pci express error (0x%x)\n",
- pci_name(hw->pdev), pex_err);
+ dev_err(&hw->pdev->dev, "PCI Express error (0x%x)\n",
+ pex_err);
/* clear the interrupt */
sky2_write32(hw, B2_TST_CTRL1, TST_CFG_WRITE_ON);
switch (hw->chip_id) {
case CHIP_ID_YUKON_EC:
case CHIP_ID_YUKON_EC_U:
+ case CHIP_ID_YUKON_EX:
return 125; /* 125 Mhz */
case CHIP_ID_YUKON_FE:
return 100; /* 100 Mhz */
}
-static int sky2_reset(struct sky2_hw *hw)
+static int __devinit sky2_init(struct sky2_hw *hw)
{
- u16 status;
u8 t8;
- int i;
sky2_write8(hw, B0_CTST, CS_RST_CLR);
hw->chip_id = sky2_read8(hw, B2_CHIP_ID);
if (hw->chip_id < CHIP_ID_YUKON_XL || hw->chip_id > CHIP_ID_YUKON_FE) {
- printk(KERN_ERR PFX "%s: unsupported chip type 0x%x\n",
- pci_name(hw->pdev), hw->chip_id);
+ dev_err(&hw->pdev->dev, "unsupported chip type 0x%x\n",
+ hw->chip_id);
return -EOPNOTSUPP;
}
+ if (hw->chip_id == CHIP_ID_YUKON_EX)
+ dev_warn(&hw->pdev->dev, "this driver not yet tested on this chip type\n"
+ "Please report success or failure to <netdev@vger.kernel.org>\n");
+
+ /* Make sure and enable all clocks */
+ if (hw->chip_id == CHIP_ID_YUKON_EX || hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_pci_write32(hw, PCI_DEV_REG3, 0);
+
hw->chip_rev = (sky2_read8(hw, B2_MAC_CFG) & CFG_CHIP_R_MSK) >> 4;
/* This rev is really old, and requires untested workarounds */
if (hw->chip_id == CHIP_ID_YUKON_EC && hw->chip_rev == CHIP_REV_YU_EC_A1) {
- printk(KERN_ERR PFX "%s: unsupported revision Yukon-%s (0x%x) rev %d\n",
- pci_name(hw->pdev), yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
- hw->chip_id, hw->chip_rev);
+ dev_err(&hw->pdev->dev, "unsupported revision Yukon-%s (0x%x) rev %d\n",
+ yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
+ hw->chip_id, hw->chip_rev);
return -EOPNOTSUPP;
}
+ hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
+ hw->ports = 1;
+ t8 = sky2_read8(hw, B2_Y2_HW_RES);
+ if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
+ if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
+ ++hw->ports;
+ }
+
+ return 0;
+}
+
+static void sky2_reset(struct sky2_hw *hw)
+{
+ u16 status;
+ int i;
+
/* disable ASF */
if (hw->chip_id <= CHIP_ID_YUKON_EC) {
- sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
+ if (hw->chip_id == CHIP_ID_YUKON_EX) {
+ status = sky2_read16(hw, HCU_CCSR);
+ status &= ~(HCU_CCSR_AHB_RST | HCU_CCSR_CPU_RST_MODE |
+ HCU_CCSR_UC_STATE_MSK);
+ sky2_write16(hw, HCU_CCSR, status);
+ } else
+ sky2_write8(hw, B28_Y2_ASF_STAT_CMD, Y2_ASF_RESET);
sky2_write16(hw, B0_CTST, Y2_ASF_DISABLE);
}
sky2_pci_write32(hw, PEX_UNC_ERR_STAT, 0xffffffffUL);
- hw->pmd_type = sky2_read8(hw, B2_PMD_TYP);
- hw->ports = 1;
- t8 = sky2_read8(hw, B2_Y2_HW_RES);
- if ((t8 & CFG_DUAL_MAC_MSK) == CFG_DUAL_MAC_MSK) {
- if (!(sky2_read8(hw, B2_Y2_CLK_GATE) & Y2_STATUS_LNK2_INAC))
- ++hw->ports;
- }
-
- sky2_set_power_state(hw, PCI_D0);
+ sky2_power_on(hw);
for (i = 0; i < hw->ports; i++) {
sky2_write8(hw, SK_REG(i, GMAC_LINK_CTRL), GMLC_RST_SET);
sky2_write8(hw, STAT_TX_TIMER_CTRL, TIM_START);
sky2_write8(hw, STAT_LEV_TIMER_CTRL, TIM_START);
sky2_write8(hw, STAT_ISR_TIMER_CTRL, TIM_START);
+}
+
+static inline u8 sky2_wol_supported(const struct sky2_hw *hw)
+{
+ return sky2_is_copper(hw) ? (WAKE_PHY | WAKE_MAGIC) : 0;
+}
+
+static void sky2_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ const struct sky2_port *sky2 = netdev_priv(dev);
+
+ wol->supported = sky2_wol_supported(sky2->hw);
+ wol->wolopts = sky2->wol;
+}
+
+static int sky2_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
+{
+ struct sky2_port *sky2 = netdev_priv(dev);
+ struct sky2_hw *hw = sky2->hw;
+
+ if (wol->wolopts & ~sky2_wol_supported(sky2->hw))
+ return -EOPNOTSUPP;
+
+ sky2->wol = wol->wolopts;
+
+ if (hw->chip_id == CHIP_ID_YUKON_EC_U)
+ sky2_write32(hw, B0_CTST, sky2->wol
+ ? Y2_HW_WOL_ON : Y2_HW_WOL_OFF);
+ if (!netif_running(dev))
+ sky2_wol_init(sky2);
return 0;
}
}
}
-/* Use hardware MIB variables for critical path statistics and
- * transmit feedback not reported at interrupt.
- * Other errors are accounted for in interrupt handler.
- */
static struct net_device_stats *sky2_get_stats(struct net_device *dev)
{
struct sky2_port *sky2 = netdev_priv(dev);
- u64 data[13];
-
- sky2_phy_stats(sky2, data, ARRAY_SIZE(data));
-
- sky2->net_stats.tx_bytes = data[0];
- sky2->net_stats.rx_bytes = data[1];
- sky2->net_stats.tx_packets = data[2] + data[4] + data[6];
- sky2->net_stats.rx_packets = data[3] + data[5] + data[7];
- sky2->net_stats.multicast = data[3] + data[5];
- sky2->net_stats.collisions = data[10];
- sky2->net_stats.tx_aborted_errors = data[12];
-
return &sky2->net_stats;
}
static const struct ethtool_ops sky2_ethtool_ops = {
.get_settings = sky2_get_settings,
.set_settings = sky2_set_settings,
- .get_drvinfo = sky2_get_drvinfo,
+ .get_drvinfo = sky2_get_drvinfo,
+ .get_wol = sky2_get_wol,
+ .set_wol = sky2_set_wol,
.get_msglevel = sky2_get_msglevel,
.set_msglevel = sky2_set_msglevel,
.nway_reset = sky2_nway_reset,
/* Initialize network device */
static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw,
- unsigned port, int highmem)
+ unsigned port,
+ int highmem, int wol)
{
struct sky2_port *sky2;
struct net_device *dev = alloc_etherdev(sizeof(*sky2));
if (!dev) {
- printk(KERN_ERR "sky2 etherdev alloc failed");
+ dev_err(&hw->pdev->dev, "etherdev alloc failed");
return NULL;
}
sky2->speed = -1;
sky2->advertising = sky2_supported_modes(hw);
sky2->rx_csum = 1;
+ sky2->wol = wol;
spin_lock_init(&sky2->phy_lock);
sky2->tx_pending = TX_DEF_PENDING;
sky2->port = port;
- if (hw->chip_id != CHIP_ID_YUKON_EC_U)
- dev->features |= NETIF_F_TSO;
+ dev->features |= NETIF_F_TSO | NETIF_F_IP_CSUM | NETIF_F_SG;
if (highmem)
dev->features |= NETIF_F_HIGHDMA;
- dev->features |= NETIF_F_IP_CSUM | NETIF_F_SG;
#ifdef SKY2_VLAN_TAG_USED
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
err = request_irq(pdev->irq, sky2_test_intr, 0, DRV_NAME, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
return err;
}
if (!hw->msi) {
/* MSI test failed, go back to INTx mode */
- printk(KERN_INFO PFX "%s: No interrupt generated using MSI, "
- "switching to INTx mode.\n",
- pci_name(pdev));
+ dev_info(&pdev->dev, "No interrupt generated using MSI, "
+ "switching to INTx mode.\n");
err = -EOPNOTSUPP;
sky2_write8(hw, B0_CTST, CS_CL_SW_IRQ);
return err;
}
+static int __devinit pci_wake_enabled(struct pci_dev *dev)
+{
+ int pm = pci_find_capability(dev, PCI_CAP_ID_PM);
+ u16 value;
+
+ if (!pm)
+ return 0;
+ if (pci_read_config_word(dev, pm + PCI_PM_CTRL, &value))
+ return 0;
+ return value & PCI_PM_CTRL_PME_ENABLE;
+}
+
static int __devinit sky2_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
- struct net_device *dev, *dev1 = NULL;
+ struct net_device *dev;
struct sky2_hw *hw;
- int err, pm_cap, using_dac = 0;
+ int err, using_dac = 0, wol_default;
err = pci_enable_device(pdev);
if (err) {
- printk(KERN_ERR PFX "%s cannot enable PCI device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot enable PCI device\n");
goto err_out;
}
err = pci_request_regions(pdev, DRV_NAME);
if (err) {
- printk(KERN_ERR PFX "%s cannot obtain PCI resources\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot obtain PCI resources\n");
goto err_out;
}
pci_set_master(pdev);
- /* Find power-management capability. */
- pm_cap = pci_find_capability(pdev, PCI_CAP_ID_PM);
- if (pm_cap == 0) {
- printk(KERN_ERR PFX "Cannot find PowerManagement capability, "
- "aborting.\n");
- err = -EIO;
- goto err_out_free_regions;
- }
-
if (sizeof(dma_addr_t) > sizeof(u32) &&
!(err = pci_set_dma_mask(pdev, DMA_64BIT_MASK))) {
using_dac = 1;
err = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK);
if (err < 0) {
- printk(KERN_ERR PFX "%s unable to obtain 64 bit DMA "
- "for consistent allocations\n", pci_name(pdev));
+ dev_err(&pdev->dev, "unable to obtain 64 bit DMA "
+ "for consistent allocations\n");
goto err_out_free_regions;
}
-
} else {
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
if (err) {
- printk(KERN_ERR PFX "%s no usable DMA configuration\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "no usable DMA configuration\n");
goto err_out_free_regions;
}
}
+ wol_default = pci_wake_enabled(pdev) ? WAKE_MAGIC : 0;
+
err = -ENOMEM;
hw = kzalloc(sizeof(*hw), GFP_KERNEL);
if (!hw) {
- printk(KERN_ERR PFX "%s: cannot allocate hardware struct\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot allocate hardware struct\n");
goto err_out_free_regions;
}
hw->regs = ioremap_nocache(pci_resource_start(pdev, 0), 0x4000);
if (!hw->regs) {
- printk(KERN_ERR PFX "%s: cannot map device registers\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot map device registers\n");
goto err_out_free_hw;
}
- hw->pm_cap = pm_cap;
#ifdef __BIG_ENDIAN
/* The sk98lin vendor driver uses hardware byte swapping but
if (!hw->st_le)
goto err_out_iounmap;
- err = sky2_reset(hw);
+ err = sky2_init(hw);
if (err)
goto err_out_iounmap;
- printk(KERN_INFO PFX "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
+ dev_info(&pdev->dev, "v%s addr 0x%llx irq %d Yukon-%s (0x%x) rev %d\n",
DRV_VERSION, (unsigned long long)pci_resource_start(pdev, 0),
pdev->irq, yukon2_name[hw->chip_id - CHIP_ID_YUKON_XL],
hw->chip_id, hw->chip_rev);
- dev = sky2_init_netdev(hw, 0, using_dac);
- if (!dev)
+ sky2_reset(hw);
+
+ dev = sky2_init_netdev(hw, 0, using_dac, wol_default);
+ if (!dev) {
+ err = -ENOMEM;
goto err_out_free_pci;
+ }
if (!disable_msi && pci_enable_msi(pdev) == 0) {
err = sky2_test_msi(hw);
err = register_netdev(dev);
if (err) {
- printk(KERN_ERR PFX "%s: cannot register net device\n",
- pci_name(pdev));
+ dev_err(&pdev->dev, "cannot register net device\n");
goto err_out_free_netdev;
}
err = request_irq(pdev->irq, sky2_intr, hw->msi ? 0 : IRQF_SHARED,
dev->name, hw);
if (err) {
- printk(KERN_ERR PFX "%s: cannot assign irq %d\n",
- pci_name(pdev), pdev->irq);
+ dev_err(&pdev->dev, "cannot assign irq %d\n", pdev->irq);
goto err_out_unregister;
}
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
sky2_show_addr(dev);
- if (hw->ports > 1 && (dev1 = sky2_init_netdev(hw, 1, using_dac))) {
- if (register_netdev(dev1) == 0)
- sky2_show_addr(dev1);
- else {
- /* Failure to register second port need not be fatal */
- printk(KERN_WARNING PFX
- "register of second port failed\n");
+ if (hw->ports > 1) {
+ struct net_device *dev1;
+
+ dev1 = sky2_init_netdev(hw, 1, using_dac, wol_default);
+ if (!dev1)
+ dev_warn(&pdev->dev, "allocation for second device failed\n");
+ else if ((err = register_netdev(dev1))) {
+ dev_warn(&pdev->dev,
+ "register of second port failed (%d)\n", err);
hw->dev[1] = NULL;
free_netdev(dev1);
- }
+ } else
+ sky2_show_addr(dev1);
}
setup_timer(&hw->idle_timer, sky2_idle, (unsigned long) hw);
unregister_netdev(dev1);
unregister_netdev(dev0);
- sky2_set_power_state(hw, PCI_D3hot);
+ sky2_power_aux(hw);
+
sky2_write16(hw, B0_Y2LED, LED_STAT_OFF);
sky2_write8(hw, B0_CTST, CS_RST_SET);
sky2_read8(hw, B0_CTST);
static int sky2_suspend(struct pci_dev *pdev, pm_message_t state)
{
struct sky2_hw *hw = pci_get_drvdata(pdev);
- int i;
- pci_power_t pstate = pci_choose_state(pdev, state);
-
- if (!(pstate == PCI_D3hot || pstate == PCI_D3cold))
- return -EINVAL;
+ int i, wol = 0;
del_timer_sync(&hw->idle_timer);
netif_poll_disable(hw->dev[0]);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
- if (netif_running(dev)) {
+ if (netif_running(dev))
sky2_down(dev);
- netif_device_detach(dev);
- }
+
+ if (sky2->wol)
+ sky2_wol_init(sky2);
+
+ wol |= sky2->wol;
}
sky2_write32(hw, B0_IMSK, 0);
+ sky2_power_aux(hw);
+
pci_save_state(pdev);
- sky2_set_power_state(hw, pstate);
+ pci_enable_wake(pdev, pci_choose_state(pdev, state), wol);
+ pci_set_power_state(pdev, pci_choose_state(pdev, state));
+
return 0;
}
struct sky2_hw *hw = pci_get_drvdata(pdev);
int i, err;
- pci_restore_state(pdev);
- pci_enable_wake(pdev, PCI_D0, 0);
- sky2_set_power_state(hw, PCI_D0);
+ err = pci_set_power_state(pdev, PCI_D0);
+ if (err)
+ goto out;
- err = sky2_reset(hw);
+ err = pci_restore_state(pdev);
if (err)
goto out;
+ pci_enable_wake(pdev, PCI_D0, 0);
+ sky2_reset(hw);
+
sky2_write32(hw, B0_IMSK, Y2_IS_BASE);
for (i = 0; i < hw->ports; i++) {
struct net_device *dev = hw->dev[i];
if (netif_running(dev)) {
- netif_device_attach(dev);
-
err = sky2_up(dev);
if (err) {
printk(KERN_ERR PFX "%s: could not up: %d\n",
netif_poll_enable(hw->dev[0]);
sky2_idle_start(hw);
+ return 0;
out:
+ dev_err(&pdev->dev, "resume failed (%d)\n", err);
+ pci_disable_device(pdev);
return err;
}
#endif
+static void sky2_shutdown(struct pci_dev *pdev)
+{
+ struct sky2_hw *hw = pci_get_drvdata(pdev);
+ int i, wol = 0;
+
+ del_timer_sync(&hw->idle_timer);
+ netif_poll_disable(hw->dev[0]);
+
+ for (i = 0; i < hw->ports; i++) {
+ struct net_device *dev = hw->dev[i];
+ struct sky2_port *sky2 = netdev_priv(dev);
+
+ if (sky2->wol) {
+ wol = 1;
+ sky2_wol_init(sky2);
+ }
+ }
+
+ if (wol)
+ sky2_power_aux(hw);
+
+ pci_enable_wake(pdev, PCI_D3hot, wol);
+ pci_enable_wake(pdev, PCI_D3cold, wol);
+
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+}
+
static struct pci_driver sky2_driver = {
.name = DRV_NAME,
.id_table = sky2_id_table,
.suspend = sky2_suspend,
.resume = sky2_resume,
#endif
+ .shutdown = sky2_shutdown,
};
static int __init sky2_init_module(void)
PCI_Y2_PHY1_COMA = 1<<28, /* Set PHY 1 to Coma Mode (YUKON-2) */
PCI_Y2_PHY2_POWD = 1<<27, /* Set PHY 2 to Power Down (YUKON-2) */
PCI_Y2_PHY1_POWD = 1<<26, /* Set PHY 1 to Power Down (YUKON-2) */
+ PCI_Y2_PME_LEGACY= 1<<15, /* PCI Express legacy power management mode */
};
enum pci_dev_reg_2 {
/* B2_CHIP_ID 8 bit Chip Identification Number */
enum {
- CHIP_ID_GENESIS = 0x0a, /* Chip ID for GENESIS */
- CHIP_ID_YUKON = 0xb0, /* Chip ID for YUKON */
- CHIP_ID_YUKON_LITE = 0xb1, /* Chip ID for YUKON-Lite (Rev. A1-A3) */
- CHIP_ID_YUKON_LP = 0xb2, /* Chip ID for YUKON-LP */
CHIP_ID_YUKON_XL = 0xb3, /* Chip ID for YUKON-2 XL */
CHIP_ID_YUKON_EC_U = 0xb4, /* Chip ID for YUKON-2 EC Ultra */
+ CHIP_ID_YUKON_EX = 0xb5, /* Chip ID for YUKON-2 Extreme */
CHIP_ID_YUKON_EC = 0xb6, /* Chip ID for YUKON-2 EC */
CHIP_ID_YUKON_FE = 0xb7, /* Chip ID for YUKON-2 FE */
POLL_LIST_ADDR_HI= 0x0e2c,/* 32 bit Poll. List Start Addr (high) */
};
+enum {
+ SMB_CFG = 0x0e40, /* 32 bit SMBus Config Register */
+ SMB_CSR = 0x0e44, /* 32 bit SMBus Control/Status Register */
+};
+
+enum {
+ CPU_WDOG = 0x0e48, /* 32 bit Watchdog Register */
+ CPU_CNTR = 0x0e4C, /* 32 bit Counter Register */
+ CPU_TIM = 0x0e50,/* 32 bit Timer Compare Register */
+ CPU_AHB_ADDR = 0x0e54, /* 32 bit CPU AHB Debug Register */
+ CPU_AHB_WDATA = 0x0e58, /* 32 bit CPU AHB Debug Register */
+ CPU_AHB_RDATA = 0x0e5C, /* 32 bit CPU AHB Debug Register */
+ HCU_MAP_BASE = 0x0e60, /* 32 bit Reset Mapping Base */
+ CPU_AHB_CTRL = 0x0e64, /* 32 bit CPU AHB Debug Register */
+ HCU_CCSR = 0x0e68, /* 32 bit CPU Control and Status Register */
+ HCU_HCSR = 0x0e6C, /* 32 bit Host Control and Status Register */
+};
+
/* ASF Subsystem Registers (Yukon-2 only) */
enum {
B28_Y2_SMB_CONFIG = 0x0e40,/* 32 bit ASF SMBus Config Register */
GMAC_LINK_CTRL = 0x0f10,/* 16 bit Link Control Reg */
/* Wake-up Frame Pattern Match Control Registers (YUKON only) */
-
- WOL_REG_OFFS = 0x20,/* HW-Bug: Address is + 0x20 against spec. */
-
WOL_CTRL_STAT = 0x0f20,/* 16 bit WOL Control/Status Reg */
WOL_MATCH_CTL = 0x0f22,/* 8 bit WOL Match Control Reg */
WOL_MATCH_RES = 0x0f23,/* 8 bit WOL Match Result Reg */
WOL_MAC_ADDR = 0x0f24,/* 32 bit WOL MAC Address */
- WOL_PATT_PME = 0x0f2a,/* 8 bit WOL PME Match Enable (Yukon-2) */
- WOL_PATT_ASFM = 0x0f2b,/* 8 bit WOL ASF Match Enable (Yukon-2) */
WOL_PATT_RPTR = 0x0f2c,/* 8 bit WOL Pattern Read Pointer */
/* WOL Pattern Length Registers (YUKON only) */
-
WOL_PATT_LEN_LO = 0x0f30,/* 32 bit WOL Pattern Length 3..0 */
WOL_PATT_LEN_HI = 0x0f34,/* 24 bit WOL Pattern Length 6..4 */
/* WOL Pattern Counter Registers (YUKON only) */
-
-
WOL_PATT_CNT_0 = 0x0f38,/* 32 bit WOL Pattern Counter 3..0 */
WOL_PATT_CNT_4 = 0x0f3c,/* 24 bit WOL Pattern Counter 6..4 */
};
+#define WOL_REGS(port, x) (x + (port)*0x80)
enum {
WOL_PATT_RAM_1 = 0x1000,/* WOL Pattern RAM Link 1 */
WOL_PATT_RAM_2 = 0x1400,/* WOL Pattern RAM Link 2 */
};
+#define WOL_PATT_RAM_BASE(port) (WOL_PATT_RAM_1 + (port)*0x400)
enum {
BASE_GMAC_1 = 0x2800,/* GMAC 1 registers */
Y2_ASF_CLR_ASFI = 1<<1, /* Clear host IRQ */
Y2_ASF_HOST_IRQ = 1<<0, /* Issue an IRQ to HOST system */
};
+/* HCU_CCSR CPU Control and Status Register */
+enum {
+ HCU_CCSR_SMBALERT_MONITOR= 1<<27, /* SMBALERT pin monitor */
+ HCU_CCSR_CPU_SLEEP = 1<<26, /* CPU sleep status */
+ /* Clock Stretching Timeout */
+ HCU_CCSR_CS_TO = 1<<25,
+ HCU_CCSR_WDOG = 1<<24, /* Watchdog Reset */
+
+ HCU_CCSR_CLR_IRQ_HOST = 1<<17, /* Clear IRQ_HOST */
+ HCU_CCSR_SET_IRQ_HCU = 1<<16, /* Set IRQ_HCU */
+
+ HCU_CCSR_AHB_RST = 1<<9, /* Reset AHB bridge */
+ HCU_CCSR_CPU_RST_MODE = 1<<8, /* CPU Reset Mode */
+
+ HCU_CCSR_SET_SYNC_CPU = 1<<5,
+ HCU_CCSR_CPU_CLK_DIVIDE_MSK = 3<<3,/* CPU Clock Divide */
+ HCU_CCSR_CPU_CLK_DIVIDE_BASE= 1<<3,
+ HCU_CCSR_OS_PRSNT = 1<<2, /* ASF OS Present */
+/* Microcontroller State */
+ HCU_CCSR_UC_STATE_MSK = 3,
+ HCU_CCSR_UC_STATE_BASE = 1<<0,
+ HCU_CCSR_ASF_RESET = 0,
+ HCU_CCSR_ASF_HALTED = 1<<1,
+ HCU_CCSR_ASF_RUNNING = 1<<0,
+};
+
+/* HCU_HCSR Host Control and Status Register */
+enum {
+ HCU_HCSR_SET_IRQ_CPU = 1<<16, /* Set IRQ_CPU */
+
+ HCU_HCSR_CLR_IRQ_HCU = 1<<1, /* Clear IRQ_HCU */
+ HCU_HCSR_SET_IRQ_HOST = 1<<0, /* Set IRQ_HOST */
+};
/* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */
enum {
GM_IS_RX_COMPL = 1<<0, /* Frame Reception Complete */
#define GMAC_DEF_MSK GM_IS_TX_FF_UR
+};
/* GMAC_LINK_CTRL 16 bit GMAC Link Control Reg (YUKON only) */
- /* Bits 15.. 2: reserved */
+enum { /* Bits 15.. 2: reserved */
GMLC_RST_CLR = 1<<1, /* Clear GMAC Link Reset */
GMLC_RST_SET = 1<<0, /* Set GMAC Link Reset */
+};
/* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */
+enum {
WOL_CTL_LINK_CHG_OCC = 1<<15,
WOL_CTL_MAGIC_PKT_OCC = 1<<14,
WOL_CTL_PATTERN_OCC = 1<<13,
WOL_CTL_DIS_PATTERN_UNIT = 1<<0,
};
-#define WOL_CTL_DEFAULT \
- (WOL_CTL_DIS_PME_ON_LINK_CHG | \
- WOL_CTL_DIS_PME_ON_PATTERN | \
- WOL_CTL_DIS_PME_ON_MAGIC_PKT | \
- WOL_CTL_DIS_LINK_CHG_UNIT | \
- WOL_CTL_DIS_PATTERN_UNIT | \
- WOL_CTL_DIS_MAGIC_PKT_UNIT)
-
-/* WOL_MATCH_CTL 8 bit WOL Match Control Reg */
-#define WOL_CTL_PATT_ENA(x) (1 << (x))
-
/* Control flags */
enum {
u8 autoneg; /* AUTONEG_ENABLE, AUTONEG_DISABLE */
u8 duplex; /* DUPLEX_HALF, DUPLEX_FULL */
u8 rx_csum;
+ u8 wol;
enum flow_control flow_mode;
enum flow_control flow_status;
struct pci_dev *pdev;
struct net_device *dev[2];
- int pm_cap;
u8 chip_id;
u8 chip_rev;
u8 pmd_type;
{
strncpy(info->driver, CARDNAME, sizeof(info->driver));
strncpy(info->version, version, sizeof(info->version));
- strncpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info));
+ strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
}
static int smc911x_ethtool_nwayreset(struct net_device *dev)
{
strncpy(info->driver, CARDNAME, sizeof(info->driver));
strncpy(info->version, version, sizeof(info->version));
- strncpy(info->bus_info, dev->class_dev.dev->bus_id, sizeof(info->bus_info));
+ strncpy(info->bus_info, dev->dev.parent->bus_id, sizeof(info->bus_info));
}
static int smc_ethtool_nwayreset(struct net_device *dev)
{
struct spider_net_descr *descr;
- for (descr = chain->tail; !descr->bus_addr; descr = descr->next) {
- pci_unmap_single(card->pdev, descr->bus_addr,
- SPIDER_NET_DESCR_SIZE, PCI_DMA_BIDIRECTIONAL);
+ descr = chain->ring;
+ do {
descr->bus_addr = 0;
- }
+ descr->next_descr_addr = 0;
+ descr = descr->next;
+ } while (descr != chain->ring);
+
+ dma_free_coherent(&card->pdev->dev, chain->num_desc,
+ chain->ring, chain->dma_addr);
}
/**
- * spider_net_init_chain - links descriptor chain
+ * spider_net_init_chain - alloc and link descriptor chain
* @card: card structure
* @chain: address of chain
- * @start_descr: address of descriptor array
- * @no: number of descriptors
*
- * we manage a circular list that mirrors the hardware structure,
+ * We manage a circular list that mirrors the hardware structure,
* except that the hardware uses bus addresses.
*
- * returns 0 on success, <0 on failure
+ * Returns 0 on success, <0 on failure
*/
static int
spider_net_init_chain(struct spider_net_card *card,
- struct spider_net_descr_chain *chain,
- struct spider_net_descr *start_descr,
- int no)
+ struct spider_net_descr_chain *chain)
{
int i;
struct spider_net_descr *descr;
dma_addr_t buf;
+ size_t alloc_size;
- descr = start_descr;
- memset(descr, 0, sizeof(*descr) * no);
+ alloc_size = chain->num_desc * sizeof (struct spider_net_descr);
- /* set up the hardware pointers in each descriptor */
- for (i=0; i<no; i++, descr++) {
- descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+ chain->ring = dma_alloc_coherent(&card->pdev->dev, alloc_size,
+ &chain->dma_addr, GFP_KERNEL);
+
+ if (!chain->ring)
+ return -ENOMEM;
- buf = pci_map_single(card->pdev, descr,
- SPIDER_NET_DESCR_SIZE,
- PCI_DMA_BIDIRECTIONAL);
+ descr = chain->ring;
+ memset(descr, 0, alloc_size);
- if (pci_dma_mapping_error(buf))
- goto iommu_error;
+ /* Set up the hardware pointers in each descriptor */
+ buf = chain->dma_addr;
+ for (i=0; i < chain->num_desc; i++, descr++) {
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
descr->bus_addr = buf;
+ descr->next_descr_addr = 0;
descr->next = descr + 1;
descr->prev = descr - 1;
+ buf += sizeof(struct spider_net_descr);
}
/* do actual circular list */
- (descr-1)->next = start_descr;
- start_descr->prev = descr-1;
+ (descr-1)->next = chain->ring;
+ chain->ring->prev = descr-1;
spin_lock_init(&chain->lock);
- chain->head = start_descr;
- chain->tail = start_descr;
-
+ chain->head = chain->ring;
+ chain->tail = chain->ring;
return 0;
-
-iommu_error:
- descr = start_descr;
- for (i=0; i < no; i++, descr++)
- if (descr->bus_addr)
- pci_unmap_single(card->pdev, descr->bus_addr,
- SPIDER_NET_DESCR_SIZE,
- PCI_DMA_BIDIRECTIONAL);
- return -ENOMEM;
}
/**
}
/**
- * spider_net_prepare_rx_descr - reinitializes a rx descriptor
+ * spider_net_prepare_rx_descr - Reinitialize RX descriptor
* @card: card structure
* @descr: descriptor to re-init
*
- * return 0 on succes, <0 on failure
+ * Return 0 on succes, <0 on failure.
*
- * allocates a new rx skb, iommu-maps it and attaches it to the descriptor.
- * Activate the descriptor state-wise
+ * Allocates a new rx skb, iommu-maps it and attaches it to the
+ * descriptor. Mark the descriptor as activated, ready-to-use.
*/
static int
spider_net_prepare_rx_descr(struct spider_net_card *card,
struct spider_net_descr *descr)
{
dma_addr_t buf;
- int error = 0;
int offset;
int bufsize;
(SPIDER_NET_RXBUF_ALIGN - 1);
if (offset)
skb_reserve(descr->skb, SPIDER_NET_RXBUF_ALIGN - offset);
- /* io-mmu-map the skb */
+ /* iommu-map the skb */
buf = pci_map_single(card->pdev, descr->skb->data,
SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
descr->buf_addr = buf;
card->spider_stats.rx_iommu_map_error++;
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
} else {
+ descr->next_descr_addr = 0;
+ wmb();
descr->dmac_cmd_status = SPIDER_NET_DESCR_CARDOWNED |
SPIDER_NET_DMAC_NOINTR_COMPLETE;
+
+ wmb();
+ descr->prev->next_descr_addr = descr->bus_addr;
}
- return error;
+ return 0;
}
/**
}
/**
- * spider_net_alloc_rx_skbs - allocates rx skbs in rx descriptor chains
+ * spider_net_alloc_rx_skbs - Allocates rx skbs in rx descriptor chains
* @card: card structure
*
- * returns 0 on success, <0 on failure
+ * Returns 0 on success, <0 on failure.
*/
static int
spider_net_alloc_rx_skbs(struct spider_net_card *card)
result = -ENOMEM;
chain = &card->rx_chain;
- /* put at least one buffer into the chain. if this fails,
- * we've got a problem. if not, spider_net_refill_rx_chain
- * will do the rest at the end of this function */
+ /* Put at least one buffer into the chain. if this fails,
+ * we've got a problem. If not, spider_net_refill_rx_chain
+ * will do the rest at the end of this function. */
if (spider_net_prepare_rx_descr(card, chain->head))
goto error;
else
chain->head = chain->head->next;
- /* this will allocate the rest of the rx buffers; if not, it's
- * business as usual later on */
+ /* This will allocate the rest of the rx buffers;
+ * if not, it's business as usual later on. */
spider_net_refill_rx_chain(card);
spider_net_enable_rxdmac(card);
return 0;
}
/* If TX queue is short, don't even bother with interrupts */
- if (cnt < card->num_tx_desc/4)
+ if (cnt < card->tx_chain.num_desc/4)
return cnt;
/* Set low-watermark 3/4th's of the way into the queue. */
* spider_net_pass_skb_up - takes an skb from a descriptor and passes it on
* @descr: descriptor to process
* @card: card structure
- * @napi: whether caller is in NAPI context
- *
- * returns 1 on success, 0 if no packet was passed to the stack
*
- * iommu-unmaps the skb, fills out skb structure and passes the data to the
- * stack. The descriptor state is not changed.
+ * Fills out skb structure and passes the data to the stack.
+ * The descriptor state is not changed.
*/
-static int
+static void
spider_net_pass_skb_up(struct spider_net_descr *descr,
- struct spider_net_card *card, int napi)
+ struct spider_net_card *card)
{
struct sk_buff *skb;
struct net_device *netdev;
data_status = descr->data_status;
data_error = descr->data_error;
-
netdev = card->netdev;
- /* unmap descriptor */
- pci_unmap_single(card->pdev, descr->buf_addr, SPIDER_NET_MAX_FRAME,
- PCI_DMA_FROMDEVICE);
-
- /* the cases we'll throw away the packet immediately */
- if (data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
- if (netif_msg_rx_err(card))
- pr_err("error in received descriptor found, "
- "data_status=x%08x, data_error=x%08x\n",
- data_status, data_error);
- card->spider_stats.rx_desc_error++;
- return 0;
- }
-
skb = descr->skb;
skb->dev = netdev;
skb_put(skb, descr->valid_size);
}
/* pass skb up to stack */
- if (napi)
- netif_receive_skb(skb);
- else
- netif_rx_ni(skb);
+ netif_receive_skb(skb);
/* update netdevice statistics */
card->netdev_stats.rx_packets++;
card->netdev_stats.rx_bytes += skb->len;
+}
- return 1;
+#ifdef DEBUG
+static void show_rx_chain(struct spider_net_card *card)
+{
+ struct spider_net_descr_chain *chain = &card->rx_chain;
+ struct spider_net_descr *start= chain->tail;
+ struct spider_net_descr *descr= start;
+ int status;
+
+ int cnt = 0;
+ int cstat = spider_net_get_descr_status(descr);
+ printk(KERN_INFO "RX chain tail at descr=%ld\n",
+ (start - card->descr) - card->tx_chain.num_desc);
+ status = cstat;
+ do
+ {
+ status = spider_net_get_descr_status(descr);
+ if (cstat != status) {
+ printk(KERN_INFO "Have %d descrs with stat=x%08x\n", cnt, cstat);
+ cstat = status;
+ cnt = 0;
+ }
+ cnt ++;
+ descr = descr->next;
+ } while (descr != start);
+ printk(KERN_INFO "Last %d descrs with stat=x%08x\n", cnt, cstat);
}
+#endif
/**
* spider_net_decode_one_descr - processes an rx descriptor
* @card: card structure
- * @napi: whether caller is in NAPI context
*
- * returns 1 if a packet has been sent to the stack, otherwise 0
+ * Returns 1 if a packet has been sent to the stack, otherwise 0
*
- * processes an rx descriptor by iommu-unmapping the data buffer and passing
+ * Processes an rx descriptor by iommu-unmapping the data buffer and passing
* the packet up to the stack. This function is called in softirq
* context, e.g. either bottom half from interrupt or NAPI polling context
*/
static int
-spider_net_decode_one_descr(struct spider_net_card *card, int napi)
+spider_net_decode_one_descr(struct spider_net_card *card)
{
struct spider_net_descr_chain *chain = &card->rx_chain;
struct spider_net_descr *descr = chain->tail;
int status;
- int result;
status = spider_net_get_descr_status(descr);
- if (status == SPIDER_NET_DESCR_CARDOWNED) {
- /* nothing in the descriptor yet */
- result=0;
- goto out;
- }
-
- if (status == SPIDER_NET_DESCR_NOT_IN_USE) {
- /* not initialized yet, the ring must be empty */
- spider_net_refill_rx_chain(card);
- spider_net_enable_rxdmac(card);
- result=0;
- goto out;
- }
+ /* Nothing in the descriptor, or ring must be empty */
+ if ((status == SPIDER_NET_DESCR_CARDOWNED) ||
+ (status == SPIDER_NET_DESCR_NOT_IN_USE))
+ return 0;
/* descriptor definitively used -- move on tail */
chain->tail = descr->next;
- result = 0;
+ /* unmap descriptor */
+ pci_unmap_single(card->pdev, descr->buf_addr,
+ SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
+
if ( (status == SPIDER_NET_DESCR_RESPONSE_ERROR) ||
(status == SPIDER_NET_DESCR_PROTECTION_ERROR) ||
(status == SPIDER_NET_DESCR_FORCE_END) ) {
pr_err("%s: dropping RX descriptor with state %d\n",
card->netdev->name, status);
card->netdev_stats.rx_dropped++;
- pci_unmap_single(card->pdev, descr->buf_addr,
- SPIDER_NET_MAX_FRAME, PCI_DMA_FROMDEVICE);
- dev_kfree_skb_irq(descr->skb);
- goto refill;
+ goto bad_desc;
}
if ( (status != SPIDER_NET_DESCR_COMPLETE) &&
(status != SPIDER_NET_DESCR_FRAME_END) ) {
- if (netif_msg_rx_err(card)) {
- pr_err("%s: RX descriptor with state %d\n",
+ if (netif_msg_rx_err(card))
+ pr_err("%s: RX descriptor with unkown state %d\n",
card->netdev->name, status);
- card->spider_stats.rx_desc_unk_state++;
- }
- goto refill;
+ card->spider_stats.rx_desc_unk_state++;
+ goto bad_desc;
}
- /* ok, we've got a packet in descr */
- result = spider_net_pass_skb_up(descr, card, napi);
-refill:
+ /* The cases we'll throw away the packet immediately */
+ if (descr->data_error & SPIDER_NET_DESTROY_RX_FLAGS) {
+ if (netif_msg_rx_err(card))
+ pr_err("%s: error in received descriptor found, "
+ "data_status=x%08x, data_error=x%08x\n",
+ card->netdev->name,
+ descr->data_status, descr->data_error);
+ goto bad_desc;
+ }
+
+ if (descr->dmac_cmd_status & 0xfefe) {
+ pr_err("%s: bad status, cmd_status=x%08x\n",
+ card->netdev->name,
+ descr->dmac_cmd_status);
+ pr_err("buf_addr=x%08x\n", descr->buf_addr);
+ pr_err("buf_size=x%08x\n", descr->buf_size);
+ pr_err("next_descr_addr=x%08x\n", descr->next_descr_addr);
+ pr_err("result_size=x%08x\n", descr->result_size);
+ pr_err("valid_size=x%08x\n", descr->valid_size);
+ pr_err("data_status=x%08x\n", descr->data_status);
+ pr_err("data_error=x%08x\n", descr->data_error);
+ pr_err("bus_addr=x%08x\n", descr->bus_addr);
+ pr_err("which=%ld\n", descr - card->rx_chain.ring);
+
+ card->spider_stats.rx_desc_error++;
+ goto bad_desc;
+ }
+
+ /* Ok, we've got a packet in descr */
+ spider_net_pass_skb_up(descr, card);
descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
- /* change the descriptor state: */
- if (!napi)
- spider_net_refill_rx_chain(card);
-out:
- return result;
+ return 1;
+
+bad_desc:
+ dev_kfree_skb_irq(descr->skb);
+ descr->dmac_cmd_status = SPIDER_NET_DESCR_NOT_IN_USE;
+ return 0;
}
/**
packets_to_do = min(*budget, netdev->quota);
while (packets_to_do) {
- if (spider_net_decode_one_descr(card, 1)) {
+ if (spider_net_decode_one_descr(card)) {
packets_done++;
packets_to_do--;
} else {
netdev->quota -= packets_done;
*budget -= packets_done;
spider_net_refill_rx_chain(card);
+ spider_net_enable_rxdmac(card);
/* if all packets are in the stack, enable interrupts and return 0 */
/* if not, return 1 */
return 0;
}
-/**
- * spider_net_handle_rxram_full - cleans up RX ring upon RX RAM full interrupt
- * @card: card structure
- *
- * spider_net_handle_rxram_full empties the RX ring so that spider can put
- * more packets in it and empty its RX RAM. This is called in bottom half
- * context
- */
-static void
-spider_net_handle_rxram_full(struct spider_net_card *card)
-{
- while (spider_net_decode_one_descr(card, 0))
- ;
- spider_net_enable_rxchtails(card);
- spider_net_enable_rxdmac(card);
- netif_rx_schedule(card->netdev);
-}
-
/**
* spider_net_handle_error_irq - handles errors raised by an interrupt
* @card: card structure
case SPIDER_NET_GRFAFLLINT: /* fallthrough */
case SPIDER_NET_GRMFLLINT:
if (netif_msg_intr(card) && net_ratelimit())
- pr_debug("Spider RX RAM full, incoming packets "
+ pr_err("Spider RX RAM full, incoming packets "
"might be discarded!\n");
spider_net_rx_irq_off(card);
- tasklet_schedule(&card->rxram_full_tl);
+ netif_rx_schedule(card->netdev);
show_error = 0;
break;
case SPIDER_NET_GDCDCEINT: /* fallthrough */
case SPIDER_NET_GDBDCEINT: /* fallthrough */
case SPIDER_NET_GDADCEINT:
- if (netif_msg_intr(card))
+ if (netif_msg_intr(card) && net_ratelimit())
pr_err("got descriptor chain end interrupt, "
"restarting DMAC %c.\n",
'D'-(i-SPIDER_NET_GDDDCEINT)/3);
break;
}
- if ((show_error) && (netif_msg_intr(card)))
+ if ((show_error) && (netif_msg_intr(card)) && net_ratelimit())
pr_err("Got error interrupt on %s, GHIINT0STS = 0x%08x, "
"GHIINT1STS = 0x%08x, GHIINT2STS = 0x%08x\n",
card->netdev->name,
spider_net_open(struct net_device *netdev)
{
struct spider_net_card *card = netdev_priv(netdev);
- struct spider_net_descr *descr;
- int i, result;
+ int result;
- result = -ENOMEM;
- if (spider_net_init_chain(card, &card->tx_chain, card->descr,
- card->num_tx_desc))
+ result = spider_net_init_chain(card, &card->tx_chain);
+ if (result)
goto alloc_tx_failed;
-
card->low_watermark = NULL;
- /* rx_chain is after tx_chain, so offset is descr + tx_count */
- if (spider_net_init_chain(card, &card->rx_chain,
- card->descr + card->num_tx_desc,
- card->num_rx_desc))
+ result = spider_net_init_chain(card, &card->rx_chain);
+ if (result)
goto alloc_rx_failed;
- descr = card->rx_chain.head;
- for (i=0; i < card->num_rx_desc; i++, descr++)
- descr->next_descr_addr = descr->next->bus_addr;
-
- /* allocate rx skbs */
+ /* Allocate rx skbs */
if (spider_net_alloc_rx_skbs(card))
goto alloc_skbs_failed;
{
struct spider_net_card *card = netdev_priv(netdev);
- tasklet_kill(&card->rxram_full_tl);
netif_poll_disable(netdev);
netif_carrier_off(netdev);
netif_stop_queue(netdev);
/* release chains */
spider_net_release_tx_chain(card, 1);
+ spider_net_free_rx_chain_contents(card);
spider_net_free_rx_chain_contents(card);
pci_set_drvdata(card->pdev, netdev);
- card->rxram_full_tl.data = (unsigned long) card;
- card->rxram_full_tl.func =
- (void (*)(unsigned long)) spider_net_handle_rxram_full;
init_timer(&card->tx_timer);
card->tx_timer.function =
(void (*)(unsigned long)) spider_net_cleanup_tx_ring;
card->options.rx_csum = SPIDER_NET_RX_CSUM_DEFAULT;
- card->num_tx_desc = tx_descriptors;
- card->num_rx_desc = rx_descriptors;
+ card->tx_chain.num_desc = tx_descriptors;
+ card->rx_chain.num_desc = rx_descriptors;
spider_net_setup_netdev_ops(netdev);
{
struct net_device *netdev;
struct spider_net_card *card;
- size_t alloc_size;
- alloc_size = sizeof (*card) +
- sizeof (struct spider_net_descr) * rx_descriptors +
- sizeof (struct spider_net_descr) * tx_descriptors;
- netdev = alloc_etherdev(alloc_size);
+ netdev = alloc_etherdev(sizeof(struct spider_net_card));
if (!netdev)
return NULL;
#ifndef _SPIDER_NET_H
#define _SPIDER_NET_H
-#define VERSION "1.6 A"
+#define VERSION "1.6 B"
#include "sungem_phy.h"
spinlock_t lock;
struct spider_net_descr *head;
struct spider_net_descr *tail;
+ struct spider_net_descr *ring;
+ int num_desc;
+ dma_addr_t dma_addr;
};
/* descriptor data_status bits */
* 701b8000 would be correct, but every packets gets that flag */
#define SPIDER_NET_DESTROY_RX_FLAGS 0x700b8000
-#define SPIDER_NET_DESCR_SIZE 32
-
/* this will be bigger some time */
struct spider_net_options {
int rx_csum; /* for rx: if 0 ip_summed=NONE,
struct spider_net_descr_chain rx_chain;
struct spider_net_descr *low_watermark;
- struct net_device_stats netdev_stats;
-
- struct spider_net_options options;
-
- spinlock_t intmask_lock;
- struct tasklet_struct rxram_full_tl;
struct timer_list tx_timer;
-
struct work_struct tx_timeout_task;
atomic_t tx_timeout_task_counter;
wait_queue_head_t waitq;
/* for ethtool */
int msg_enable;
- int num_rx_desc;
- int num_tx_desc;
+ struct net_device_stats netdev_stats;
struct spider_net_extra_stats spider_stats;
-
- struct spider_net_descr descr[0];
+ struct spider_net_options options;
};
#define pr_err(fmt,arg...) \
struct spider_net_card *card = netdev->priv;
ering->tx_max_pending = SPIDER_NET_TX_DESCRIPTORS_MAX;
- ering->tx_pending = card->num_tx_desc;
+ ering->tx_pending = card->tx_chain.num_desc;
ering->rx_max_pending = SPIDER_NET_RX_DESCRIPTORS_MAX;
- ering->rx_pending = card->num_rx_desc;
+ ering->rx_pending = card->rx_chain.num_desc;
}
static int spider_net_get_stats_count(struct net_device *netdev)
#define TG3_VLAN_TAG_USED 0
#endif
-#ifdef NETIF_F_TSO
#define TG3_TSO_SUPPORT 1
-#else
-#define TG3_TSO_SUPPORT 0
-#endif
#include "tg3.h"
entry = tp->tx_prod;
base_flags = 0;
-#if TG3_TSO_SUPPORT != 0
mss = 0;
if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
(mss = skb_shinfo(skb)->gso_size) != 0) {
}
else if (skb->ip_summed == CHECKSUM_PARTIAL)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
-#else
- mss = 0;
- if (skb->ip_summed == CHECKSUM_PARTIAL)
- base_flags |= TXD_FLAG_TCPUDP_CSUM;
-#endif
#if TG3_VLAN_TAG_USED
if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
base_flags |= (TXD_FLAG_VLAN |
return NETDEV_TX_OK;
}
-#if TG3_TSO_SUPPORT != 0
static int tg3_start_xmit_dma_bug(struct sk_buff *, struct net_device *);
/* Use GSO to workaround a rare TSO bug that may be triggered when the
return NETDEV_TX_OK;
}
-#endif
/* hard_start_xmit for devices that have the 4G bug and/or 40-bit bug and
* support TG3_FLG2_HW_TSO_1 or firmware TSO only.
base_flags = 0;
if (skb->ip_summed == CHECKSUM_PARTIAL)
base_flags |= TXD_FLAG_TCPUDP_CSUM;
-#if TG3_TSO_SUPPORT != 0
mss = 0;
if (skb->len > (tp->dev->mtu + ETH_HLEN) &&
(mss = skb_shinfo(skb)->gso_size) != 0) {
}
}
}
-#else
- mss = 0;
-#endif
#if TG3_VLAN_TAG_USED
if (tp->vlgrp != NULL && vlan_tx_tag_present(skb))
base_flags |= (TXD_FLAG_VLAN |
return 0;
}
-#if TG3_TSO_SUPPORT != 0
#define TG3_TSO_FW_RELEASE_MAJOR 0x1
#define TG3_TSO_FW_RELASE_MINOR 0x6
return 0;
}
-#endif /* TG3_TSO_SUPPORT != 0 */
/* tp->lock is held. */
static void __tg3_set_mac_addr(struct tg3 *tp)
tw32(BUFMGR_DMA_DESC_POOL_ADDR, NIC_SRAM_DMA_DESC_POOL_BASE);
tw32(BUFMGR_DMA_DESC_POOL_SIZE, NIC_SRAM_DMA_DESC_POOL_SIZE);
}
-#if TG3_TSO_SUPPORT != 0
else if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
int fw_len;
tw32(BUFMGR_MB_POOL_SIZE,
NIC_SRAM_MBUF_POOL_SIZE5705 - fw_len - 0xa00);
}
-#endif
if (tp->dev->mtu <= ETH_DATA_LEN) {
tw32(BUFMGR_MB_RDMA_LOW_WATER,
if (tp->tg3_flags2 & TG3_FLG2_PCI_EXPRESS)
rdmac_mode |= RDMAC_MODE_FIFO_LONG_BURST;
-#if TG3_TSO_SUPPORT != 0
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
rdmac_mode |= (1 << 27);
-#endif
/* Receive/send statistics. */
if (tp->tg3_flags2 & TG3_FLG2_5750_PLUS) {
tw32(RCVBDI_MODE, RCVBDI_MODE_ENABLE | RCVBDI_MODE_RCB_ATTN_ENAB);
tw32(RCVDBDI_MODE, RCVDBDI_MODE_ENABLE | RCVDBDI_MODE_INV_RING_SZ);
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE);
-#if TG3_TSO_SUPPORT != 0
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO)
tw32(SNDDATAI_MODE, SNDDATAI_MODE_ENABLE | 0x8);
-#endif
tw32(SNDBDI_MODE, SNDBDI_MODE_ENABLE | SNDBDI_MODE_ATTN_ENABLE);
tw32(SNDBDS_MODE, SNDBDS_MODE_ENABLE | SNDBDS_MODE_ATTN_ENABLE);
return err;
}
-#if TG3_TSO_SUPPORT != 0
if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) {
err = tg3_load_tso_firmware(tp);
if (err)
return err;
}
-#endif
tp->tx_mode = TX_MODE_ENABLE;
tw32_f(MAC_TX_MODE, tp->tx_mode);
tp->msg_enable = value;
}
-#if TG3_TSO_SUPPORT != 0
static int tg3_set_tso(struct net_device *dev, u32 value)
{
struct tg3 *tp = netdev_priv(dev);
}
return ethtool_op_set_tso(dev, value);
}
-#endif
static int tg3_nway_reset(struct net_device *dev)
{
.set_tx_csum = tg3_set_tx_csum,
.get_sg = ethtool_op_get_sg,
.set_sg = ethtool_op_set_sg,
-#if TG3_TSO_SUPPORT != 0
.get_tso = ethtool_op_get_tso,
.set_tso = tg3_set_tso,
-#endif
.self_test_count = tg3_get_test_count,
.self_test = tg3_self_test,
.get_strings = tg3_get_strings,
tg3_init_bufmgr_config(tp);
-#if TG3_TSO_SUPPORT != 0
if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) {
tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE;
}
dev->features |= NETIF_F_TSO6;
}
-#endif
if (tp->pci_chip_rev_id == CHIPREV_ID_5705_A1 &&
!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) &&
if (UCC_GETH_TX_BD_RING_ALIGNMENT > 4)
align = UCC_GETH_TX_BD_RING_ALIGNMENT;
ugeth->tx_bd_ring_offset[j] =
- (u32) (kmalloc((u32) (length + align),
- GFP_KERNEL));
+ kmalloc((u32) (length + align), GFP_KERNEL);
+
if (ugeth->tx_bd_ring_offset[j] != 0)
ugeth->p_tx_bd_ring[j] =
(void*)((ugeth->tx_bd_ring_offset[j] +
if (UCC_GETH_RX_BD_RING_ALIGNMENT > 4)
align = UCC_GETH_RX_BD_RING_ALIGNMENT;
ugeth->rx_bd_ring_offset[j] =
- (u32) (kmalloc((u32) (length + align), GFP_KERNEL));
+ kmalloc((u32) (length + align), GFP_KERNEL);
if (ugeth->rx_bd_ring_offset[j] != 0)
ugeth->p_rx_bd_ring[j] =
(void*)((ugeth->rx_bd_ring_offset[j] +
/* Init Tx bds */
for (j = 0; j < ug_info->numQueuesTx; j++) {
/* Setup the skbuff rings */
- ugeth->tx_skbuff[j] =
- (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) *
- ugeth->ug_info->bdRingLenTx[j],
- GFP_KERNEL);
+ ugeth->tx_skbuff[j] = kmalloc(sizeof(struct sk_buff *) *
+ ugeth->ug_info->bdRingLenTx[j],
+ GFP_KERNEL);
if (ugeth->tx_skbuff[j] == NULL) {
ugeth_err("%s: Could not allocate tx_skbuff",
/* Init Rx bds */
for (j = 0; j < ug_info->numQueuesRx; j++) {
/* Setup the skbuff rings */
- ugeth->rx_skbuff[j] =
- (struct sk_buff **)kmalloc(sizeof(struct sk_buff *) *
- ugeth->ug_info->bdRingLenRx[j],
- GFP_KERNEL);
+ ugeth->rx_skbuff[j] = kmalloc(sizeof(struct sk_buff *) *
+ ugeth->ug_info->bdRingLenRx[j],
+ GFP_KERNEL);
if (ugeth->rx_skbuff[j] == NULL) {
ugeth_err("%s: Could not allocate rx_skbuff",
* allocated resources can be released when the channel is freed.
*/
if (!(ugeth->p_init_enet_param_shadow =
- (struct ucc_geth_init_pram *) kmalloc(sizeof(struct ucc_geth_init_pram),
- GFP_KERNEL))) {
+ kmalloc(sizeof(struct ucc_geth_init_pram), GFP_KERNEL))) {
ugeth_err
("%s: Can not allocate memory for"
" p_UccInitEnetParamShadows.", __FUNCTION__);
comment "Refer to the file README.mlppp, provided by PC300 package."
depends on WAN && HDLC && PC300 && (PPP=n || !PPP_MULTILINK || PPP_SYNC_TTY=n || !HDLC_PPP)
+config PC300TOO
+ tristate "Cyclades PC300 RSV/X21 alternative support"
+ depends on HDLC && PCI
+ help
+ Alternative driver for PC300 RSV/X21 PCI cards made by
+ Cyclades, Inc. If you have such a card, say Y here and see
+ <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
+
+ To compile this as a module, choose M here: the module
+ will be called pc300too.
+
+ If unsure, say N here.
+
config N2
tristate "SDL RISCom/N2 support"
depends on HDLC && ISA
To compile this driver as a module, choose M here: the
module will be called dlci.
-config DLCI_COUNT
- int "Max open DLCI"
- depends on DLCI
- default "24"
- help
- Maximal number of logical point-to-point frame relay connections
- (the identifiers of which are called DCLIs) that the driver can
- handle.
-
- The default is probably fine.
-
config DLCI_MAX
int "Max DLCI per device"
depends on DLCI
obj-$(CONFIG_C101) += c101.o
obj-$(CONFIG_WANXL) += wanxl.o
obj-$(CONFIG_PCI200SYN) += pci200syn.o
+obj-$(CONFIG_PC300TOO) += pc300too.o
clean-files := wanxlfw.inc
$(obj)/wanxl.o: $(obj)/wanxlfw.inc
return -EINVAL;
}
-void hdlc_setup(struct net_device *dev)
+static void hdlc_setup(struct net_device *dev)
{
hdlc_device *hdlc = dev_to_hdlc(dev);
EXPORT_SYMBOL(hdlc_open);
EXPORT_SYMBOL(hdlc_close);
EXPORT_SYMBOL(hdlc_ioctl);
-EXPORT_SYMBOL(hdlc_setup);
EXPORT_SYMBOL(alloc_hdlcdev);
EXPORT_SYMBOL(unregister_hdlc_device);
EXPORT_SYMBOL(register_hdlc_protocol);
--- /dev/null
+/*
+ * Cyclades PC300 synchronous serial card driver for Linux
+ *
+ * Copyright (C) 2000-2007 Krzysztof Halasa <khc@pm.waw.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License
+ * as published by the Free Software Foundation.
+ *
+ * For information see <http://www.kernel.org/pub/linux/utils/net/hdlc/>.
+ *
+ * Sources of information:
+ * Hitachi HD64572 SCA-II User's Manual
+ * Cyclades PC300 Linux driver
+ *
+ * This driver currently supports only PC300/RSV (V.24/V.35) and
+ * PC300/X21 cards.
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/fcntl.h>
+#include <linux/in.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/moduleparam.h>
+#include <linux/netdevice.h>
+#include <linux/hdlc.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#include "hd64572.h"
+
+static const char* version = "Cyclades PC300 driver version: 1.17";
+static const char* devname = "PC300";
+
+#undef DEBUG_PKT
+#define DEBUG_RINGS
+
+#define PC300_PLX_SIZE 0x80 /* PLX control window size (128 B) */
+#define PC300_SCA_SIZE 0x400 /* SCA window size (1 KB) */
+#define ALL_PAGES_ALWAYS_MAPPED
+#define NEED_DETECT_RAM
+#define NEED_SCA_MSCI_INTR
+#define MAX_TX_BUFFERS 10
+
+static int pci_clock_freq = 33000000;
+static int use_crystal_clock = 0;
+static unsigned int CLOCK_BASE;
+
+/* Masks to access the init_ctrl PLX register */
+#define PC300_CLKSEL_MASK (0x00000004UL)
+#define PC300_CHMEDIA_MASK(port) (0x00000020UL << ((port) * 3))
+#define PC300_CTYPE_MASK (0x00000800UL)
+
+
+enum { PC300_RSV = 1, PC300_X21, PC300_TE }; /* card types */
+
+/*
+ * PLX PCI9050-1 local configuration and shared runtime registers.
+ * This structure can be used to access 9050 registers (memory mapped).
+ */
+typedef struct {
+ u32 loc_addr_range[4]; /* 00-0Ch : Local Address Ranges */
+ u32 loc_rom_range; /* 10h : Local ROM Range */
+ u32 loc_addr_base[4]; /* 14-20h : Local Address Base Addrs */
+ u32 loc_rom_base; /* 24h : Local ROM Base */
+ u32 loc_bus_descr[4]; /* 28-34h : Local Bus Descriptors */
+ u32 rom_bus_descr; /* 38h : ROM Bus Descriptor */
+ u32 cs_base[4]; /* 3C-48h : Chip Select Base Addrs */
+ u32 intr_ctrl_stat; /* 4Ch : Interrupt Control/Status */
+ u32 init_ctrl; /* 50h : EEPROM ctrl, Init Ctrl, etc */
+}plx9050;
+
+
+
+typedef struct port_s {
+ struct net_device *dev;
+ struct card_s *card;
+ spinlock_t lock; /* TX lock */
+ sync_serial_settings settings;
+ int rxpart; /* partial frame received, next frame invalid*/
+ unsigned short encoding;
+ unsigned short parity;
+ unsigned int iface;
+ u16 rxin; /* rx ring buffer 'in' pointer */
+ u16 txin; /* tx ring buffer 'in' and 'last' pointers */
+ u16 txlast;
+ u8 rxs, txs, tmc; /* SCA registers */
+ u8 phy_node; /* physical port # - 0 or 1 */
+}port_t;
+
+
+
+typedef struct card_s {
+ int type; /* RSV, X21, etc. */
+ int n_ports; /* 1 or 2 ports */
+ u8* __iomem rambase; /* buffer memory base (virtual) */
+ u8* __iomem scabase; /* SCA memory base (virtual) */
+ plx9050 __iomem *plxbase; /* PLX registers memory base (virtual) */
+ u32 init_ctrl_value; /* Saved value - 9050 bug workaround */
+ u16 rx_ring_buffers; /* number of buffers in a ring */
+ u16 tx_ring_buffers;
+ u16 buff_offset; /* offset of first buffer of first channel */
+ u8 irq; /* interrupt request level */
+
+ port_t ports[2];
+}card_t;
+
+
+#define sca_in(reg, card) readb(card->scabase + (reg))
+#define sca_out(value, reg, card) writeb(value, card->scabase + (reg))
+#define sca_inw(reg, card) readw(card->scabase + (reg))
+#define sca_outw(value, reg, card) writew(value, card->scabase + (reg))
+#define sca_inl(reg, card) readl(card->scabase + (reg))
+#define sca_outl(value, reg, card) writel(value, card->scabase + (reg))
+
+#define port_to_card(port) (port->card)
+#define log_node(port) (port->phy_node)
+#define phy_node(port) (port->phy_node)
+#define winbase(card) (card->rambase)
+#define get_port(card, port) ((port) < (card)->n_ports ? \
+ (&(card)->ports[port]) : (NULL))
+
+#include "hd6457x.c"
+
+
+static void pc300_set_iface(port_t *port)
+{
+ card_t *card = port->card;
+ u32* init_ctrl = &card->plxbase->init_ctrl;
+ u16 msci = get_msci(port);
+ u8 rxs = port->rxs & CLK_BRG_MASK;
+ u8 txs = port->txs & CLK_BRG_MASK;
+
+ sca_out(EXS_TES1, (phy_node(port) ? MSCI1_OFFSET : MSCI0_OFFSET) + EXS,
+ port_to_card(port));
+ switch(port->settings.clock_type) {
+ case CLOCK_INT:
+ rxs |= CLK_BRG; /* BRG output */
+ txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+ break;
+
+ case CLOCK_TXINT:
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_BRG; /* BRG output */
+ break;
+
+ case CLOCK_TXFROMRX:
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_TX_RXCLK; /* RX clock */
+ break;
+
+ default: /* EXTernal clock */
+ rxs |= CLK_LINE; /* RXC input */
+ txs |= CLK_PIN_OUT | CLK_LINE; /* TXC input */
+ break;
+ }
+
+ port->rxs = rxs;
+ port->txs = txs;
+ sca_out(rxs, msci + RXS, card);
+ sca_out(txs, msci + TXS, card);
+ sca_set_port(port);
+
+ if (port->card->type == PC300_RSV) {
+ if (port->iface == IF_IFACE_V35)
+ writel(card->init_ctrl_value |
+ PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+ else
+ writel(card->init_ctrl_value &
+ ~PC300_CHMEDIA_MASK(port->phy_node), init_ctrl);
+ }
+}
+
+
+
+static int pc300_open(struct net_device *dev)
+{
+ port_t *port = dev_to_port(dev);
+
+ int result = hdlc_open(dev);
+ if (result)
+ return result;
+
+ sca_open(dev);
+ pc300_set_iface(port);
+ return 0;
+}
+
+
+
+static int pc300_close(struct net_device *dev)
+{
+ sca_close(dev);
+ hdlc_close(dev);
+ return 0;
+}
+
+
+
+static int pc300_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
+{
+ const size_t size = sizeof(sync_serial_settings);
+ sync_serial_settings new_line;
+ sync_serial_settings __user *line = ifr->ifr_settings.ifs_ifsu.sync;
+ int new_type;
+ port_t *port = dev_to_port(dev);
+
+#ifdef DEBUG_RINGS
+ if (cmd == SIOCDEVPRIVATE) {
+ sca_dump_rings(dev);
+ return 0;
+ }
+#endif
+ if (cmd != SIOCWANDEV)
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ if (ifr->ifr_settings.type == IF_GET_IFACE) {
+ ifr->ifr_settings.type = port->iface;
+ if (ifr->ifr_settings.size < size) {
+ ifr->ifr_settings.size = size; /* data size wanted */
+ return -ENOBUFS;
+ }
+ if (copy_to_user(line, &port->settings, size))
+ return -EFAULT;
+ return 0;
+
+ }
+
+ if (port->card->type == PC300_X21 &&
+ (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+ ifr->ifr_settings.type == IF_IFACE_X21))
+ new_type = IF_IFACE_X21;
+
+ else if (port->card->type == PC300_RSV &&
+ (ifr->ifr_settings.type == IF_IFACE_SYNC_SERIAL ||
+ ifr->ifr_settings.type == IF_IFACE_V35))
+ new_type = IF_IFACE_V35;
+
+ else if (port->card->type == PC300_RSV &&
+ ifr->ifr_settings.type == IF_IFACE_V24)
+ new_type = IF_IFACE_V24;
+
+ else
+ return hdlc_ioctl(dev, ifr, cmd);
+
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+
+ if (copy_from_user(&new_line, line, size))
+ return -EFAULT;
+
+ if (new_line.clock_type != CLOCK_EXT &&
+ new_line.clock_type != CLOCK_TXFROMRX &&
+ new_line.clock_type != CLOCK_INT &&
+ new_line.clock_type != CLOCK_TXINT)
+ return -EINVAL; /* No such clock setting */
+
+ if (new_line.loopback != 0 && new_line.loopback != 1)
+ return -EINVAL;
+
+ memcpy(&port->settings, &new_line, size); /* Update settings */
+ port->iface = new_type;
+ pc300_set_iface(port);
+ return 0;
+}
+
+
+
+static void pc300_pci_remove_one(struct pci_dev *pdev)
+{
+ int i;
+ card_t *card = pci_get_drvdata(pdev);
+
+ for (i = 0; i < 2; i++)
+ if (card->ports[i].card) {
+ struct net_device *dev = port_to_dev(&card->ports[i]);
+ unregister_hdlc_device(dev);
+ }
+
+ if (card->irq)
+ free_irq(card->irq, card);
+
+ if (card->rambase)
+ iounmap(card->rambase);
+ if (card->scabase)
+ iounmap(card->scabase);
+ if (card->plxbase)
+ iounmap(card->plxbase);
+
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ if (card->ports[0].dev)
+ free_netdev(card->ports[0].dev);
+ if (card->ports[1].dev)
+ free_netdev(card->ports[1].dev);
+ kfree(card);
+}
+
+
+
+static int __devinit pc300_pci_init_one(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ card_t *card;
+ u8 rev_id;
+ u32 __iomem *p;
+ int i;
+ u32 ramsize;
+ u32 ramphys; /* buffer memory base */
+ u32 scaphys; /* SCA memory base */
+ u32 plxphys; /* PLX registers memory base */
+
+#ifndef MODULE
+ static int printed_version;
+ if (!printed_version++)
+ printk(KERN_INFO "%s\n", version);
+#endif
+
+ i = pci_enable_device(pdev);
+ if (i)
+ return i;
+
+ i = pci_request_regions(pdev, "PC300");
+ if (i) {
+ pci_disable_device(pdev);
+ return i;
+ }
+
+ card = kmalloc(sizeof(card_t), GFP_KERNEL);
+ if (card == NULL) {
+ printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ return -ENOBUFS;
+ }
+ memset(card, 0, sizeof(card_t));
+ pci_set_drvdata(pdev, card);
+
+ if (pdev->device == PCI_DEVICE_ID_PC300_TE_1 ||
+ pdev->device == PCI_DEVICE_ID_PC300_TE_2)
+ card->type = PC300_TE; /* not fully supported */
+ else if (card->init_ctrl_value & PC300_CTYPE_MASK)
+ card->type = PC300_X21;
+ else
+ card->type = PC300_RSV;
+
+ if (pdev->device == PCI_DEVICE_ID_PC300_RX_1 ||
+ pdev->device == PCI_DEVICE_ID_PC300_TE_1)
+ card->n_ports = 1;
+ else
+ card->n_ports = 2;
+
+ for (i = 0; i < card->n_ports; i++)
+ if (!(card->ports[i].dev = alloc_hdlcdev(&card->ports[i]))) {
+ printk(KERN_ERR "pc300: unable to allocate memory\n");
+ pc300_pci_remove_one(pdev);
+ return -ENOMEM;
+ }
+
+ pci_read_config_byte(pdev, PCI_REVISION_ID, &rev_id);
+ if (pci_resource_len(pdev, 0) != PC300_PLX_SIZE ||
+ pci_resource_len(pdev, 2) != PC300_SCA_SIZE ||
+ pci_resource_len(pdev, 3) < 16384) {
+ printk(KERN_ERR "pc300: invalid card EEPROM parameters\n");
+ pc300_pci_remove_one(pdev);
+ return -EFAULT;
+ }
+
+ plxphys = pci_resource_start(pdev,0) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->plxbase = ioremap(plxphys, PC300_PLX_SIZE);
+
+ scaphys = pci_resource_start(pdev,2) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->scabase = ioremap(scaphys, PC300_SCA_SIZE);
+
+ ramphys = pci_resource_start(pdev,3) & PCI_BASE_ADDRESS_MEM_MASK;
+ card->rambase = ioremap(ramphys, pci_resource_len(pdev,3));
+
+ if (card->plxbase == NULL ||
+ card->scabase == NULL ||
+ card->rambase == NULL) {
+ printk(KERN_ERR "pc300: ioremap() failed\n");
+ pc300_pci_remove_one(pdev);
+ }
+
+ /* PLX PCI 9050 workaround for local configuration register read bug */
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, scaphys);
+ card->init_ctrl_value = readl(&((plx9050*)card->scabase)->init_ctrl);
+ pci_write_config_dword(pdev, PCI_BASE_ADDRESS_0, plxphys);
+
+ /* Reset PLX */
+ p = &card->plxbase->init_ctrl;
+ writel(card->init_ctrl_value | 0x40000000, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ writel(card->init_ctrl_value, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ /* Reload Config. Registers from EEPROM */
+ writel(card->init_ctrl_value | 0x20000000, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ writel(card->init_ctrl_value, p);
+ readl(p); /* Flush the write - do not use sca_flush */
+ udelay(1);
+
+ ramsize = sca_detect_ram(card, card->rambase,
+ pci_resource_len(pdev, 3));
+
+ if (use_crystal_clock)
+ card->init_ctrl_value &= ~PC300_CLKSEL_MASK;
+ else
+ card->init_ctrl_value |= PC300_CLKSEL_MASK;
+
+ writel(card->init_ctrl_value, &card->plxbase->init_ctrl);
+ /* number of TX + RX buffers for one port */
+ i = ramsize / (card->n_ports * (sizeof(pkt_desc) + HDLC_MAX_MRU));
+ card->tx_ring_buffers = min(i / 2, MAX_TX_BUFFERS);
+ card->rx_ring_buffers = i - card->tx_ring_buffers;
+
+ card->buff_offset = card->n_ports * sizeof(pkt_desc) *
+ (card->tx_ring_buffers + card->rx_ring_buffers);
+
+ printk(KERN_INFO "pc300: PC300/%s, %u KB RAM at 0x%x, IRQ%u, "
+ "using %u TX + %u RX packets rings\n",
+ card->type == PC300_X21 ? "X21" :
+ card->type == PC300_TE ? "TE" : "RSV",
+ ramsize / 1024, ramphys, pdev->irq,
+ card->tx_ring_buffers, card->rx_ring_buffers);
+
+ if (card->tx_ring_buffers < 1) {
+ printk(KERN_ERR "pc300: RAM test failed\n");
+ pc300_pci_remove_one(pdev);
+ return -EFAULT;
+ }
+
+ /* Enable interrupts on the PCI bridge, LINTi1 active low */
+ writew(0x0041, &card->plxbase->intr_ctrl_stat);
+
+ /* Allocate IRQ */
+ if (request_irq(pdev->irq, sca_intr, IRQF_SHARED, devname, card)) {
+ printk(KERN_WARNING "pc300: could not allocate IRQ%d.\n",
+ pdev->irq);
+ pc300_pci_remove_one(pdev);
+ return -EBUSY;
+ }
+ card->irq = pdev->irq;
+
+ sca_init(card, 0);
+
+ // COTE not set - allows better TX DMA settings
+ // sca_out(sca_in(PCR, card) | PCR_COTE, PCR, card);
+
+ sca_out(0x10, BTCR, card);
+
+ for (i = 0; i < card->n_ports; i++) {
+ port_t *port = &card->ports[i];
+ struct net_device *dev = port_to_dev(port);
+ hdlc_device *hdlc = dev_to_hdlc(dev);
+ port->phy_node = i;
+
+ spin_lock_init(&port->lock);
+ SET_MODULE_OWNER(dev);
+ dev->irq = card->irq;
+ dev->mem_start = ramphys;
+ dev->mem_end = ramphys + ramsize - 1;
+ dev->tx_queue_len = 50;
+ dev->do_ioctl = pc300_ioctl;
+ dev->open = pc300_open;
+ dev->stop = pc300_close;
+ hdlc->attach = sca_attach;
+ hdlc->xmit = sca_xmit;
+ port->settings.clock_type = CLOCK_EXT;
+ port->card = card;
+ if (card->type == PC300_X21)
+ port->iface = IF_IFACE_X21;
+ else
+ port->iface = IF_IFACE_V35;
+
+ if (register_hdlc_device(dev)) {
+ printk(KERN_ERR "pc300: unable to register hdlc "
+ "device\n");
+ port->card = NULL;
+ pc300_pci_remove_one(pdev);
+ return -ENOBUFS;
+ }
+ sca_init_sync_port(port); /* Set up SCA memory */
+
+ printk(KERN_INFO "%s: PC300 node %d\n",
+ dev->name, port->phy_node);
+ }
+ return 0;
+}
+
+
+
+static struct pci_device_id pc300_pci_tbl[] __devinitdata = {
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_RX_2, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_1, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { PCI_VENDOR_ID_CYCLADES, PCI_DEVICE_ID_PC300_TE_2, PCI_ANY_ID,
+ PCI_ANY_ID, 0, 0, 0 },
+ { 0, }
+};
+
+
+static struct pci_driver pc300_pci_driver = {
+ name: "PC300",
+ id_table: pc300_pci_tbl,
+ probe: pc300_pci_init_one,
+ remove: pc300_pci_remove_one,
+};
+
+
+static int __init pc300_init_module(void)
+{
+#ifdef MODULE
+ printk(KERN_INFO "%s\n", version);
+#endif
+ if (pci_clock_freq < 1000000 || pci_clock_freq > 80000000) {
+ printk(KERN_ERR "pc300: Invalid PCI clock frequency\n");
+ return -EINVAL;
+ }
+ if (use_crystal_clock != 0 && use_crystal_clock != 1) {
+ printk(KERN_ERR "pc300: Invalid 'use_crystal_clock' value\n");
+ return -EINVAL;
+ }
+
+ CLOCK_BASE = use_crystal_clock ? 24576000 : pci_clock_freq;
+
+ return pci_module_init(&pc300_pci_driver);
+}
+
+
+
+static void __exit pc300_cleanup_module(void)
+{
+ pci_unregister_driver(&pc300_pci_driver);
+}
+
+MODULE_AUTHOR("Krzysztof Halasa <khc@pm.waw.pl>");
+MODULE_DESCRIPTION("Cyclades PC300 serial port driver");
+MODULE_LICENSE("GPL v2");
+MODULE_DEVICE_TABLE(pci, pc300_pci_tbl);
+module_param(pci_clock_freq, int, 0444);
+MODULE_PARM_DESC(pci_clock_freq, "System PCI clock frequency in Hz");
+module_param(use_crystal_clock, int, 0444);
+MODULE_PARM_DESC(use_crystal_clock,
+ "Use 24.576 MHz clock instead of PCI clock");
+module_init(pc300_init_module);
+module_exit(pc300_cleanup_module);
static void z8530_rx(struct z8530_channel *c)
{
u8 ch,stat;
- spin_lock(c->lock);
-
+
while(1)
{
/* FIFO empty ? */
*/
write_zsctrl(c, ERR_RES);
write_zsctrl(c, RES_H_IUS);
- spin_unlock(c->lock);
}
static void z8530_tx(struct z8530_channel *c)
{
- spin_lock(c->lock);
while(c->txcount) {
/* FIFO full ? */
if(!(read_zsreg(c, R0)&4))
z8530_tx_done(c);
write_zsctrl(c, RES_H_IUS);
- spin_unlock(c->lock);
}
/**
{
u8 status, altered;
- spin_lock(chan->lock);
status=read_zsreg(chan, R0);
altered=chan->status^status;
}
write_zsctrl(chan, RES_EXT_INT);
write_zsctrl(chan, RES_H_IUS);
- spin_unlock(chan->lock);
}
struct z8530_irqhandler z8530_sync=
static void z8530_dma_rx(struct z8530_channel *chan)
{
- spin_lock(chan->lock);
if(chan->rxdma_on)
{
/* Special condition check only */
/* DMA is off right now, drain the slow way */
z8530_rx(chan);
}
- spin_unlock(chan->lock);
}
/**
static void z8530_dma_tx(struct z8530_channel *chan)
{
- spin_lock(chan->lock);
if(!chan->dma_tx)
{
printk(KERN_WARNING "Hey who turned the DMA off?\n");
/* This shouldnt occur in DMA mode */
printk(KERN_ERR "DMA tx - bogus event!\n");
z8530_tx(chan);
- spin_unlock(chan->lock);
}
/**
}
}
- spin_lock(chan->lock);
if(altered&chan->dcdcheck)
{
if(status&chan->dcdcheck)
write_zsctrl(chan, RES_EXT_INT);
write_zsctrl(chan, RES_H_IUS);
- spin_unlock(chan->lock);
}
struct z8530_irqhandler z8530_dma_sync=
#define BCM43xx_UCODEFLAG_UNKPACTRL 0x0040
#define BCM43xx_UCODEFLAG_JAPAN 0x0080
+/* Hardware Radio Enable masks */
+#define BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK (1 << 16)
+#define BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK (1 << 4)
+
/* Generic-Interrupt reasons. */
#define BCM43xx_IRQ_READY (1 << 0)
#define BCM43xx_IRQ_BEACON (1 << 1)
bad_frames_preempt:1, /* Use "Bad Frames Preemption" (default off) */
reg124_set_0x4:1, /* Some variable to keep track of IRQ stuff. */
short_preamble:1, /* TRUE, if short preamble is enabled. */
- firmware_norelease:1; /* Do not release the firmware. Used on suspend. */
+ firmware_norelease:1, /* Do not release the firmware. Used on suspend. */
+ radio_hw_enable:1; /* TRUE if radio is hardware enabled */
struct bcm43xx_stats stats;
*/
#include "bcm43xx_leds.h"
+#include "bcm43xx_radio.h"
#include "bcm43xx.h"
#include <asm/bitops.h>
switch (led_index) {
case 0:
led->behaviour = BCM43xx_LED_ACTIVITY;
+ led->activelow = 1;
if (bcm->board_vendor == PCI_VENDOR_ID_COMPAQ)
led->behaviour = BCM43xx_LED_RADIO_ALL;
break;
turn_on = activity;
break;
case BCM43xx_LED_RADIO_ALL:
- turn_on = radio->enabled;
+ turn_on = radio->enabled && bcm43xx_is_hw_radio_enabled(bcm);
break;
case BCM43xx_LED_RADIO_A:
case BCM43xx_LED_BCM4303_2:
- turn_on = (radio->enabled && phy->type == BCM43xx_PHYTYPE_A);
+ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
+ phy->type == BCM43xx_PHYTYPE_A);
break;
case BCM43xx_LED_RADIO_B:
case BCM43xx_LED_BCM4303_1:
- turn_on = (radio->enabled &&
+ turn_on = (radio->enabled && bcm43xx_is_hw_radio_enabled(bcm) &&
(phy->type == BCM43xx_PHYTYPE_B ||
phy->type == BCM43xx_PHYTYPE_G));
break;
case BCM43xx_LED_MODE_BG:
- if (phy->type == BCM43xx_PHYTYPE_G &&
+ if (phy->type == BCM43xx_PHYTYPE_G && bcm43xx_is_hw_radio_enabled(bcm) &&
1/*FIXME: using G rates.*/)
turn_on = 1;
break;
if (err)
goto err_gpio_cleanup;
bcm43xx_radio_turn_on(bcm);
+ bcm->radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+ dprintk(KERN_INFO PFX "Radio %s by hardware\n",
+ (bcm->radio_hw_enable == 0) ? "disabled" : "enabled");
bcm43xx_write16(bcm, 0x03E6, 0x0000);
err = bcm43xx_phy_init(bcm);
}
static void bcm43xx_periodic_every15sec(struct bcm43xx_private *bcm)
+{
+ bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
+ //TODO for APHY (temperature?)
+}
+
+static void bcm43xx_periodic_every1sec(struct bcm43xx_private *bcm)
{
struct bcm43xx_phyinfo *phy = bcm43xx_current_phy(bcm);
struct bcm43xx_radioinfo *radio = bcm43xx_current_radio(bcm);
+ int radio_hw_enable;
+ /* check if radio hardware enabled status changed */
+ radio_hw_enable = bcm43xx_is_hw_radio_enabled(bcm);
+ if (unlikely(bcm->radio_hw_enable != radio_hw_enable)) {
+ bcm->radio_hw_enable = radio_hw_enable;
+ dprintk(KERN_INFO PFX "Radio hardware status changed to %s\n",
+ (radio_hw_enable == 0) ? "disabled" : "enabled");
+ bcm43xx_leds_update(bcm, 0);
+ }
if (phy->type == BCM43xx_PHYTYPE_G) {
//TODO: update_aci_moving_average
if (radio->aci_enable && radio->aci_wlan_automatic) {
//TODO: implement rev1 workaround
}
}
- bcm43xx_phy_xmitpower(bcm); //FIXME: unless scanning?
- //TODO for APHY (temperature?)
}
static void do_periodic_work(struct bcm43xx_private *bcm)
{
- if (bcm->periodic_state % 8 == 0)
+ if (bcm->periodic_state % 120 == 0)
bcm43xx_periodic_every120sec(bcm);
- if (bcm->periodic_state % 4 == 0)
+ if (bcm->periodic_state % 60 == 0)
bcm43xx_periodic_every60sec(bcm);
- if (bcm->periodic_state % 2 == 0)
+ if (bcm->periodic_state % 30 == 0)
bcm43xx_periodic_every30sec(bcm);
- bcm43xx_periodic_every15sec(bcm);
+ if (bcm->periodic_state % 15 == 0)
+ bcm43xx_periodic_every15sec(bcm);
+ bcm43xx_periodic_every1sec(bcm);
- schedule_delayed_work(&bcm->periodic_work, HZ * 15);
+ schedule_delayed_work(&bcm->periodic_work, HZ);
}
static void bcm43xx_periodic_work_handler(struct work_struct *work)
unsigned long orig_trans_start = 0;
mutex_lock(&bcm->mutex);
- if (unlikely(bcm->periodic_state % 4 == 0)) {
+ if (unlikely(bcm->periodic_state % 60 == 0)) {
/* Periodic work will take a long time, so we want it to
* be preemtible.
*/
do_periodic_work(bcm);
- if (unlikely(bcm->periodic_state % 4 == 0)) {
+ if (unlikely(bcm->periodic_state % 60 == 0)) {
spin_lock_irqsave(&bcm->irq_lock, flags);
tasklet_enable(&bcm->isr_tasklet);
bcm43xx_interrupt_enable(bcm, savedirqs);
}
radio->enabled = 1;
dprintk(KERN_INFO PFX "Radio turned on\n");
+ bcm43xx_leds_update(bcm, 0);
}
void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm)
bcm43xx_phy_write(bcm, 0x0015, 0xAA00);
radio->enabled = 0;
dprintk(KERN_INFO PFX "Radio turned off\n");
+ bcm43xx_leds_update(bcm, 0);
}
void bcm43xx_radio_clear_tssi(struct bcm43xx_private *bcm)
void bcm43xx_radio_turn_on(struct bcm43xx_private *bcm);
void bcm43xx_radio_turn_off(struct bcm43xx_private *bcm);
+static inline
+int bcm43xx_is_hw_radio_enabled(struct bcm43xx_private *bcm)
+{
+ /* function to return state of hardware enable of radio
+ * returns 0 if radio disabled, 1 if radio enabled
+ */
+ if (bcm->current_core->rev >= 3)
+ return ((bcm43xx_read32(bcm, BCM43xx_MMIO_RADIO_HWENABLED_HI)
+ & BCM43xx_MMIO_RADIO_HWENABLED_HI_MASK)
+ == 0) ? 1 : 0;
+ else
+ return ((bcm43xx_read16(bcm, BCM43xx_MMIO_RADIO_HWENABLED_LO)
+ & BCM43xx_MMIO_RADIO_HWENABLED_LO_MASK)
+ == 0) ? 0 : 1;
+}
+
int bcm43xx_radio_selectchannel(struct bcm43xx_private *bcm, u8 channel,
int synthetic_pu_workaround);
if (strchr(dev->name, '%'))
ret = dev_alloc_name(dev, dev->name);
- SET_NETDEV_DEV(dev, mdev->class_dev.dev);
+ SET_NETDEV_DEV(dev, mdev->dev.parent);
if (ret >= 0)
ret = register_netdevice(dev);
{
struct ipw_priv *priv = ieee80211_priv(dev);
mutex_lock(&priv->mutex);
- if (wrqu->rts.disabled)
+ if (wrqu->rts.disabled || !wrqu->rts.fixed)
priv->rts_threshold = DEFAULT_RTS_THRESHOLD;
else {
if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
{
struct ipw_priv *priv = ieee80211_priv(dev);
mutex_lock(&priv->mutex);
- if (wrqu->frag.disabled)
+ if (wrqu->frag.disabled || !wrqu->frag.fixed)
priv->ieee->fts = DEFAULT_FTS;
else {
if (wrqu->frag.value < MIN_FRAG_THRESHOLD ||
int err;
struct comp_id nic_id, sta_id;
unsigned int firmver;
- char tmp[SYMBOL_MAX_VER_LEN+1];
+ char tmp[SYMBOL_MAX_VER_LEN+1] __attribute__((aligned(2)));
/* Get the hardware version */
err = HERMES_READ_RECORD(hw, USER_BAP, HERMES_RID_NICID, &nic_id);
strncpy(info->driver, DRIVER_NAME, sizeof(info->driver) - 1);
strncpy(info->version, DRIVER_VERSION, sizeof(info->version) - 1);
strncpy(info->fw_version, priv->fw_name, sizeof(info->fw_version) - 1);
- if (dev->class_dev.dev)
- strncpy(info->bus_info, dev->class_dev.dev->bus_id,
+ if (dev->dev.parent)
+ strncpy(info->bus_info, dev->dev.parent->bus_id,
sizeof(info->bus_info) - 1);
else
snprintf(info->bus_info, sizeof(info->bus_info) - 1,
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev->class_dev.dev->bus_id,
+ "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
#include <linux/module.h>
#include <linux/netdevice.h>
+#include <linux/ethtool.h>
#include <linux/pci.h>
#include <linux/etherdevice.h>
#include <linux/delay.h>
}
#endif
+static void islpci_ethtool_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+}
+
+static struct ethtool_ops islpci_ethtool_ops = {
+ .get_drvinfo = islpci_ethtool_get_drvinfo,
+};
+
struct net_device *
islpci_setup(struct pci_dev *pdev)
{
ndev->do_ioctl = &prism54_ioctl;
ndev->wireless_handlers =
(struct iw_handler_def *) &prism54_handler_def;
+ ndev->ethtool_ops = &islpci_ethtool_ops;
ndev->hard_start_xmit = &islpci_eth_transmit;
/* ndev->set_multicast_list = &islpci_set_multicast_list; */
int islpci_free_memory(islpci_private *);
struct net_device *islpci_setup(struct pci_dev *);
+
+#define DRV_NAME "prism54"
+#define DRV_VERSION "1.2"
+
#endif /* _ISLPCI_DEV_H */
#include "islpci_mgt.h" /* for pc_debug */
#include "isl_oid.h"
-#define DRV_NAME "prism54"
-#define DRV_VERSION "1.2"
-
MODULE_AUTHOR("[Intersil] R.Bastings and W.Termorshuizen, The prism54.org Development Team <prism54-devel@prism54.org>");
MODULE_DESCRIPTION("The Prism54 802.11 Wireless LAN adapter");
MODULE_LICENSE("GPL");
/* Finally, report what we've done */
printk(KERN_DEBUG "%s: " DRIVER_NAME " at %s, irq %d, io "
- "0x%04x-0x%04x\n", dev->name, dev->class_dev.dev->bus_id,
+ "0x%04x-0x%04x\n", dev->name, dev->dev.parent->bus_id,
link->irq.AssignedIRQ, link->io.BasePort1,
link->io.BasePort1 + link->io.NumPorts1 - 1);
dev_info(zd_chip_dev(chip), "%s\n", buffer);
}
+static zd_addr_t inc_addr(zd_addr_t addr)
+{
+ u16 a = (u16)addr;
+ /* Control registers use byte addressing, but everything else uses word
+ * addressing. */
+ if ((a & 0xf000) == CR_START)
+ a += 2;
+ else
+ a += 1;
+ return (zd_addr_t)a;
+}
+
/* Read a variable number of 32-bit values. Parameter count is not allowed to
* exceed USB_MAX_IOREAD32_COUNT.
*/
for (i = 0; i < count; i++) {
int j = 2*i;
/* We read the high word always first. */
- a16[j] = zd_inc_word(addr[i]);
+ a16[j] = inc_addr(addr[i]);
a16[j+1] = addr[i];
}
j = 2*i;
/* We write the high word always first. */
ioreqs16[j].value = ioreqs[i].value >> 16;
- ioreqs16[j].addr = zd_inc_word(ioreqs[i].addr);
+ ioreqs16[j].addr = inc_addr(ioreqs[i].addr);
ioreqs16[j+1].value = ioreqs[i].value;
ioreqs16[j+1].addr = ioreqs[i].addr;
}
ZD_ASSERT(mutex_is_locked(&chip->mutex));
for (i = 0;;) {
- r = zd_ioread32_locked(chip, &v, e2p_addr+i/2);
+ r = zd_ioread32_locked(chip, &v,
+ (zd_addr_t)((u16)e2p_addr+i/2));
if (r)
return r;
v -= guard;
static int zd1211_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ACK_TIMEOUT_EXT, 0x20 },
- { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_ZD1211_RETRY_MAX, 0x2 },
- { CR_SNIFFER_ON, 0 },
- { CR_RX_FILTER, STA_RX_FILTER },
- { CR_GROUP_HASH_P1, 0x00 },
- { CR_GROUP_HASH_P2, 0x80000000 },
- { CR_REG1, 0xa4 },
- { CR_ADDA_PWR_DWN, 0x7f },
- { CR_BCN_PLCP_CFG, 0x00f00401 },
- { CR_PHY_DELAY, 0x00 },
- { CR_ACK_TIMEOUT_EXT, 0x80 },
- { CR_ADDA_PWR_DWN, 0x00 },
- { CR_ACK_TIME_80211, 0x100 },
- { CR_RX_PE_DELAY, 0x70 },
- { CR_PS_CTRL, 0x10000000 },
- { CR_RTS_CTS_RATE, 0x02030203 },
{ CR_RX_THRESHOLD, 0x000c0640 },
- { CR_AFTER_PNP, 0x1 },
- { CR_WEP_PROTECT, 0x114 },
};
- int r;
-
dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
- r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
-#ifdef DEBUG
- if (r) {
- dev_err(zd_chip_dev(chip),
- "error in zd_iowrite32a_locked. Error number %d\n", r);
- }
-#endif /* DEBUG */
- return r;
+ return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
}
static int zd1211b_hw_init_hmac(struct zd_chip *chip)
{
static const struct zd_ioreq32 ioreqs[] = {
- { CR_ACK_TIMEOUT_EXT, 0x20 },
- { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_ZD1211B_RETRY_MAX, 0x02020202 },
{ CR_ZD1211B_TX_PWR_CTL4, 0x007f003f },
{ CR_ZD1211B_TX_PWR_CTL3, 0x007f003f },
{ CR_ZD1211B_AIFS_CTL1, 0x00280028 },
{ CR_ZD1211B_AIFS_CTL2, 0x008C003C },
{ CR_ZD1211B_TXOP, 0x01800824 },
+ { CR_RX_THRESHOLD, 0x000c0eff, },
+ };
+
+ dev_dbg_f(zd_chip_dev(chip), "\n");
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ return zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
+}
+
+static int hw_init_hmac(struct zd_chip *chip)
+{
+ int r;
+ static const struct zd_ioreq32 ioreqs[] = {
+ { CR_ACK_TIMEOUT_EXT, 0x20 },
+ { CR_ADDA_MBIAS_WARMTIME, 0x30000808 },
{ CR_SNIFFER_ON, 0 },
{ CR_RX_FILTER, STA_RX_FILTER },
{ CR_GROUP_HASH_P1, 0x00 },
{ CR_RX_PE_DELAY, 0x70 },
{ CR_PS_CTRL, 0x10000000 },
{ CR_RTS_CTS_RATE, 0x02030203 },
- { CR_RX_THRESHOLD, 0x000c0eff, },
{ CR_AFTER_PNP, 0x1 },
{ CR_WEP_PROTECT, 0x114 },
+ { CR_IFS_VALUE, IFS_VALUE_DEFAULT },
};
- int r;
-
- dev_dbg_f(zd_chip_dev(chip), "\n");
ZD_ASSERT(mutex_is_locked(&chip->mutex));
r = zd_iowrite32a_locked(chip, ioreqs, ARRAY_SIZE(ioreqs));
- if (r) {
- dev_dbg_f(zd_chip_dev(chip),
- "error in zd_iowrite32a_locked. Error number %d\n", r);
- }
- return r;
-}
+ if (r)
+ return r;
-static int hw_init_hmac(struct zd_chip *chip)
-{
return chip->is_zd1211b ?
zd1211b_hw_init_hmac(chip) : zd1211_hw_init_hmac(chip);
}
if (r)
return r;
- /* Although the vendor driver defaults to a different value during
- * init, it overwrites the IFS value with the following every time
- * the channel changes. We should aim to be more intelligent... */
- r = zd_iowrite32_locked(chip, IFS_VALUE_DEFAULT, CR_IFS_VALUE);
- if (r)
- return r;
-
return set_beacon_interval(chip, 100);
}
+static zd_addr_t fw_reg_addr(struct zd_chip *chip, u16 offset)
+{
+ return (zd_addr_t)((u16)chip->fw_regs_base + offset);
+}
+
#ifdef DEBUG
static int dump_cr(struct zd_chip *chip, const zd_addr_t addr,
const char *addr_string)
static void dump_fw_registers(struct zd_chip *chip)
{
- static const zd_addr_t addr[4] = {
- FW_FIRMWARE_VER, FW_USB_SPEED, FW_FIX_TX_RATE,
- FW_LINK_STATUS
+ const zd_addr_t addr[4] = {
+ fw_reg_addr(chip, FW_REG_FIRMWARE_VER),
+ fw_reg_addr(chip, FW_REG_USB_SPEED),
+ fw_reg_addr(chip, FW_REG_FIX_TX_RATE),
+ fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
};
int r;
int r;
u16 version;
- r = zd_ioread16_locked(chip, &version, FW_FIRMWARE_VER);
+ r = zd_ioread16_locked(chip, &version,
+ fw_reg_addr(chip, FW_REG_FIRMWARE_VER));
if (r)
return r;
return r;
}
+static int read_fw_regs_offset(struct zd_chip *chip)
+{
+ int r;
+
+ ZD_ASSERT(mutex_is_locked(&chip->mutex));
+ r = zd_ioread16_locked(chip, (u16*)&chip->fw_regs_base,
+ FWRAW_REGS_ADDR);
+ if (r)
+ return r;
+ dev_dbg_f(zd_chip_dev(chip), "fw_regs_base: %#06hx\n",
+ (u16)chip->fw_regs_base);
+
+ return 0;
+}
+
+
int zd_chip_init_hw(struct zd_chip *chip, u8 device_type)
{
int r;
if (r)
goto out;
- r = zd_usb_init_hw(&chip->usb);
+ r = read_fw_regs_offset(chip);
if (r)
goto out;
int zd_chip_control_leds(struct zd_chip *chip, enum led_status status)
{
- static const zd_addr_t a[] = {
- FW_LINK_STATUS,
+ const zd_addr_t a[] = {
+ fw_reg_addr(chip, FW_REG_LED_LINK_STATUS),
CR_LED,
};
int r;
u16 v[ARRAY_SIZE(a)];
struct zd_ioreq16 ioreqs[ARRAY_SIZE(a)] = {
- [0] = { FW_LINK_STATUS },
+ [0] = { fw_reg_addr(chip, FW_REG_LED_LINK_STATUS) },
[1] = { CR_LED },
};
u16 other_led;
#ifndef _ZD_CHIP_H
#define _ZD_CHIP_H
-#include "zd_types.h"
#include "zd_rf.h"
#include "zd_usb.h"
* adds a processor for handling the USB protocol.
*/
+/* Address space */
+enum {
+ /* CONTROL REGISTERS */
+ CR_START = 0x9000,
+
+
+ /* FIRMWARE */
+ FW_START = 0xee00,
+
+
+ /* EEPROM */
+ E2P_START = 0xf800,
+ E2P_LEN = 0x800,
+
+ /* EEPROM layout */
+ E2P_LOAD_CODE_LEN = 0xe, /* base 0xf800 */
+ E2P_LOAD_VECT_LEN = 0x9, /* base 0xf80e */
+ /* E2P_DATA indexes into this */
+ E2P_DATA_LEN = 0x7e, /* base 0xf817 */
+ E2P_BOOT_CODE_LEN = 0x760, /* base 0xf895 */
+ E2P_INTR_VECT_LEN = 0xb, /* base 0xfff5 */
+
+ /* Some precomputed offsets into the EEPROM */
+ E2P_DATA_OFFSET = E2P_LOAD_CODE_LEN + E2P_LOAD_VECT_LEN,
+ E2P_BOOT_CODE_OFFSET = E2P_DATA_OFFSET + E2P_DATA_LEN,
+};
+
+#define CTL_REG(offset) ((zd_addr_t)(CR_START + (offset)))
+#define E2P_DATA(offset) ((zd_addr_t)(E2P_START + E2P_DATA_OFFSET + (offset)))
+#define FWRAW_DATA(offset) ((zd_addr_t)(FW_START + (offset)))
+
/* 8-bit hardware registers */
#define CR0 CTL_REG(0x0000)
#define CR1 CTL_REG(0x0004)
#define CR_MAX_PHY_REG 255
-/* Taken from the ZYDAS driver, not all of them are relevant for the ZSD1211
+/* Taken from the ZYDAS driver, not all of them are relevant for the ZD1211
* driver.
*/
/*
* Upper 16 bit contains the regulatory domain.
*/
-#define E2P_SUBID E2P_REG(0x00)
-#define E2P_POD E2P_REG(0x02)
-#define E2P_MAC_ADDR_P1 E2P_REG(0x04)
-#define E2P_MAC_ADDR_P2 E2P_REG(0x06)
-#define E2P_PWR_CAL_VALUE1 E2P_REG(0x08)
-#define E2P_PWR_CAL_VALUE2 E2P_REG(0x0a)
-#define E2P_PWR_CAL_VALUE3 E2P_REG(0x0c)
-#define E2P_PWR_CAL_VALUE4 E2P_REG(0x0e)
-#define E2P_PWR_INT_VALUE1 E2P_REG(0x10)
-#define E2P_PWR_INT_VALUE2 E2P_REG(0x12)
-#define E2P_PWR_INT_VALUE3 E2P_REG(0x14)
-#define E2P_PWR_INT_VALUE4 E2P_REG(0x16)
+#define E2P_SUBID E2P_DATA(0x00)
+#define E2P_POD E2P_DATA(0x02)
+#define E2P_MAC_ADDR_P1 E2P_DATA(0x04)
+#define E2P_MAC_ADDR_P2 E2P_DATA(0x06)
+#define E2P_PWR_CAL_VALUE1 E2P_DATA(0x08)
+#define E2P_PWR_CAL_VALUE2 E2P_DATA(0x0a)
+#define E2P_PWR_CAL_VALUE3 E2P_DATA(0x0c)
+#define E2P_PWR_CAL_VALUE4 E2P_DATA(0x0e)
+#define E2P_PWR_INT_VALUE1 E2P_DATA(0x10)
+#define E2P_PWR_INT_VALUE2 E2P_DATA(0x12)
+#define E2P_PWR_INT_VALUE3 E2P_DATA(0x14)
+#define E2P_PWR_INT_VALUE4 E2P_DATA(0x16)
/* Contains a bit for each allowed channel. It gives for Europe (ETSI 0x30)
* also only 11 channels. */
-#define E2P_ALLOWED_CHANNEL E2P_REG(0x18)
-
-#define E2P_PHY_REG E2P_REG(0x1a)
-#define E2P_DEVICE_VER E2P_REG(0x20)
-#define E2P_36M_CAL_VALUE1 E2P_REG(0x28)
-#define E2P_36M_CAL_VALUE2 E2P_REG(0x2a)
-#define E2P_36M_CAL_VALUE3 E2P_REG(0x2c)
-#define E2P_36M_CAL_VALUE4 E2P_REG(0x2e)
-#define E2P_11A_INT_VALUE1 E2P_REG(0x30)
-#define E2P_11A_INT_VALUE2 E2P_REG(0x32)
-#define E2P_11A_INT_VALUE3 E2P_REG(0x34)
-#define E2P_11A_INT_VALUE4 E2P_REG(0x36)
-#define E2P_48M_CAL_VALUE1 E2P_REG(0x38)
-#define E2P_48M_CAL_VALUE2 E2P_REG(0x3a)
-#define E2P_48M_CAL_VALUE3 E2P_REG(0x3c)
-#define E2P_48M_CAL_VALUE4 E2P_REG(0x3e)
-#define E2P_48M_INT_VALUE1 E2P_REG(0x40)
-#define E2P_48M_INT_VALUE2 E2P_REG(0x42)
-#define E2P_48M_INT_VALUE3 E2P_REG(0x44)
-#define E2P_48M_INT_VALUE4 E2P_REG(0x46)
-#define E2P_54M_CAL_VALUE1 E2P_REG(0x48) /* ??? */
-#define E2P_54M_CAL_VALUE2 E2P_REG(0x4a)
-#define E2P_54M_CAL_VALUE3 E2P_REG(0x4c)
-#define E2P_54M_CAL_VALUE4 E2P_REG(0x4e)
-#define E2P_54M_INT_VALUE1 E2P_REG(0x50)
-#define E2P_54M_INT_VALUE2 E2P_REG(0x52)
-#define E2P_54M_INT_VALUE3 E2P_REG(0x54)
-#define E2P_54M_INT_VALUE4 E2P_REG(0x56)
-
-/* All 16 bit values */
-#define FW_FIRMWARE_VER FW_REG(0)
-/* non-zero if USB high speed connection */
-#define FW_USB_SPEED FW_REG(1)
-#define FW_FIX_TX_RATE FW_REG(2)
-/* Seems to be able to control LEDs over the firmware */
-#define FW_LINK_STATUS FW_REG(3)
-#define FW_SOFT_RESET FW_REG(4)
-#define FW_FLASH_CHK FW_REG(5)
+#define E2P_ALLOWED_CHANNEL E2P_DATA(0x18)
+
+#define E2P_PHY_REG E2P_DATA(0x1a)
+#define E2P_DEVICE_VER E2P_DATA(0x20)
+#define E2P_36M_CAL_VALUE1 E2P_DATA(0x28)
+#define E2P_36M_CAL_VALUE2 E2P_DATA(0x2a)
+#define E2P_36M_CAL_VALUE3 E2P_DATA(0x2c)
+#define E2P_36M_CAL_VALUE4 E2P_DATA(0x2e)
+#define E2P_11A_INT_VALUE1 E2P_DATA(0x30)
+#define E2P_11A_INT_VALUE2 E2P_DATA(0x32)
+#define E2P_11A_INT_VALUE3 E2P_DATA(0x34)
+#define E2P_11A_INT_VALUE4 E2P_DATA(0x36)
+#define E2P_48M_CAL_VALUE1 E2P_DATA(0x38)
+#define E2P_48M_CAL_VALUE2 E2P_DATA(0x3a)
+#define E2P_48M_CAL_VALUE3 E2P_DATA(0x3c)
+#define E2P_48M_CAL_VALUE4 E2P_DATA(0x3e)
+#define E2P_48M_INT_VALUE1 E2P_DATA(0x40)
+#define E2P_48M_INT_VALUE2 E2P_DATA(0x42)
+#define E2P_48M_INT_VALUE3 E2P_DATA(0x44)
+#define E2P_48M_INT_VALUE4 E2P_DATA(0x46)
+#define E2P_54M_CAL_VALUE1 E2P_DATA(0x48) /* ??? */
+#define E2P_54M_CAL_VALUE2 E2P_DATA(0x4a)
+#define E2P_54M_CAL_VALUE3 E2P_DATA(0x4c)
+#define E2P_54M_CAL_VALUE4 E2P_DATA(0x4e)
+#define E2P_54M_INT_VALUE1 E2P_DATA(0x50)
+#define E2P_54M_INT_VALUE2 E2P_DATA(0x52)
+#define E2P_54M_INT_VALUE3 E2P_DATA(0x54)
+#define E2P_54M_INT_VALUE4 E2P_DATA(0x56)
+
+/* This word contains the base address of the FW_REG_ registers below */
+#define FWRAW_REGS_ADDR FWRAW_DATA(0x1d)
+
+/* All 16 bit values, offset from the address in FWRAW_REGS_ADDR */
+enum {
+ FW_REG_FIRMWARE_VER = 0,
+ /* non-zero if USB high speed connection */
+ FW_REG_USB_SPEED = 1,
+ FW_REG_FIX_TX_RATE = 2,
+ /* Seems to be able to control LEDs over the firmware */
+ FW_REG_LED_LINK_STATUS = 3,
+ FW_REG_SOFT_RESET = 4,
+ FW_REG_FLASH_CHK = 5,
+};
+/* Values for FW_LINK_STATUS */
#define FW_LINK_OFF 0x0
#define FW_LINK_TX 0x1
/* 0x2 - link led on? */
-enum {
- CR_BASE_OFFSET = 0x9000,
- FW_START_OFFSET = 0xee00,
- FW_BASE_ADDR_OFFSET = FW_START_OFFSET + 0x1d,
- EEPROM_START_OFFSET = 0xf800,
- EEPROM_SIZE = 0x800, /* words */
- LOAD_CODE_SIZE = 0xe, /* words */
- LOAD_VECT_SIZE = 0x10000 - 0xfff7, /* words */
- EEPROM_REGS_OFFSET = LOAD_CODE_SIZE + LOAD_VECT_SIZE,
- EEPROM_REGS_SIZE = 0x7e, /* words */
- E2P_BASE_OFFSET = EEPROM_START_OFFSET +
- EEPROM_REGS_OFFSET,
-};
-
-#define FW_REG_TABLE_ADDR USB_ADDR(FW_START_OFFSET + 0x1d)
-
enum {
/* indices for ofdm_cal_values */
OFDM_36M_INDEX = 0,
struct zd_usb usb;
struct zd_rf rf;
struct mutex mutex;
+ /* Base address of FW_REG_ registers */
+ zd_addr_t fw_regs_base;
u8 e2p_mac[ETH_ALEN];
/* EepSetPoint in the vendor driver */
u8 pwr_cal_values[E2P_CHANNEL_COUNT];
#include <linux/device.h>
#include <linux/kernel.h>
+typedef u16 __nocast zd_addr_t;
+
#define dev_printk_f(level, dev, fmt, args...) \
dev_printk(level, dev, "%s() " fmt, __func__, ##args)
#define _ZD_IEEE80211_H
#include <net/ieee80211.h>
-#include "zd_types.h"
/* Additional definitions from the standards.
*/
#ifndef _ZD_RF_H
#define _ZD_RF_H
-#include "zd_types.h"
-
#define UW2451_RF 0x2
#define UCHIP_RF 0x3
#define AL2230_RF 0x4
+++ /dev/null
-/* zd_types.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef _ZD_TYPES_H
-#define _ZD_TYPES_H
-
-#include <linux/types.h>
-
-/* We have three register spaces mapped into the overall USB address space of
- * 64K words (16-bit values). There is the control register space of
- * double-word registers, the eeprom register space and the firmware register
- * space. The control register space is byte mapped, the others are word
- * mapped.
- *
- * For that reason, we are using byte offsets for control registers and word
- * offsets for everything else.
- */
-
-typedef u32 __nocast zd_addr_t;
-
-enum {
- ADDR_BASE_MASK = 0xff000000,
- ADDR_OFFSET_MASK = 0x0000ffff,
- ADDR_ZERO_MASK = 0x00ff0000,
- NULL_BASE = 0x00000000,
- USB_BASE = 0x01000000,
- CR_BASE = 0x02000000,
- CR_MAX_OFFSET = 0x0b30,
- E2P_BASE = 0x03000000,
- E2P_MAX_OFFSET = 0x007e,
- FW_BASE = 0x04000000,
- FW_MAX_OFFSET = 0x0005,
-};
-
-#define ZD_ADDR_BASE(addr) ((u32)(addr) & ADDR_BASE_MASK)
-#define ZD_OFFSET(addr) ((u32)(addr) & ADDR_OFFSET_MASK)
-
-#define ZD_ADDR(base, offset) \
- ((zd_addr_t)(((base) & ADDR_BASE_MASK) | ((offset) & ADDR_OFFSET_MASK)))
-
-#define ZD_NULL_ADDR ((zd_addr_t)0)
-#define USB_REG(offset) ZD_ADDR(USB_BASE, offset) /* word addressing */
-#define CTL_REG(offset) ZD_ADDR(CR_BASE, offset) /* byte addressing */
-#define E2P_REG(offset) ZD_ADDR(E2P_BASE, offset) /* word addressing */
-#define FW_REG(offset) ZD_ADDR(FW_BASE, offset) /* word addressing */
-
-static inline zd_addr_t zd_inc_word(zd_addr_t addr)
-{
- u32 base = ZD_ADDR_BASE(addr);
- u32 offset = ZD_OFFSET(addr);
-
- offset += base == CR_BASE ? 2 : 1;
-
- return base | offset;
-}
-
-#endif /* _ZD_TYPES_H */
{ USB_DEVICE(0x079b, 0x0062), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x1582, 0x6003), .driver_info = DEVICE_ZD1211B },
{ USB_DEVICE(0x050d, 0x705c), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x083a, 0x4505), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0471, 0x1236), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x13b1, 0x0024), .driver_info = DEVICE_ZD1211B },
+ { USB_DEVICE(0x0586, 0x340f), .driver_info = DEVICE_ZD1211B },
/* "Driverless" devices that need ejecting */
{ USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER },
{}
#define FW_ZD1211_PREFIX "zd1211/zd1211_"
#define FW_ZD1211B_PREFIX "zd1211/zd1211b_"
-/* register address handling */
-
-#ifdef DEBUG
-static int check_addr(struct zd_usb *usb, zd_addr_t addr)
-{
- u32 base = ZD_ADDR_BASE(addr);
- u32 offset = ZD_OFFSET(addr);
-
- if ((u32)addr & ADDR_ZERO_MASK)
- goto invalid_address;
- switch (base) {
- case USB_BASE:
- break;
- case CR_BASE:
- if (offset > CR_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "CR offset %#010x larger than"
- " CR_MAX_OFFSET %#10x\n",
- offset, CR_MAX_OFFSET);
- goto invalid_address;
- }
- if (offset & 1) {
- dev_dbg(zd_usb_dev(usb),
- "CR offset %#010x is not a multiple of 2\n",
- offset);
- goto invalid_address;
- }
- break;
- case E2P_BASE:
- if (offset > E2P_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "E2P offset %#010x larger than"
- " E2P_MAX_OFFSET %#010x\n",
- offset, E2P_MAX_OFFSET);
- goto invalid_address;
- }
- break;
- case FW_BASE:
- if (!usb->fw_base_offset) {
- dev_dbg(zd_usb_dev(usb),
- "ERROR: fw base offset has not been set\n");
- return -EAGAIN;
- }
- if (offset > FW_MAX_OFFSET) {
- dev_dbg(zd_usb_dev(usb),
- "FW offset %#10x is larger than"
- " FW_MAX_OFFSET %#010x\n",
- offset, FW_MAX_OFFSET);
- goto invalid_address;
- }
- break;
- default:
- dev_dbg(zd_usb_dev(usb),
- "address has unsupported base %#010x\n", addr);
- goto invalid_address;
- }
-
- return 0;
-invalid_address:
- dev_dbg(zd_usb_dev(usb),
- "ERROR: invalid address: %#010x\n", addr);
- return -EINVAL;
-}
-#endif /* DEBUG */
-
-static u16 usb_addr(struct zd_usb *usb, zd_addr_t addr)
-{
- u32 base;
- u16 offset;
-
- base = ZD_ADDR_BASE(addr);
- offset = ZD_OFFSET(addr);
-
- ZD_ASSERT(check_addr(usb, addr) == 0);
-
- switch (base) {
- case CR_BASE:
- offset += CR_BASE_OFFSET;
- break;
- case E2P_BASE:
- offset += E2P_BASE_OFFSET;
- break;
- case FW_BASE:
- offset += usb->fw_base_offset;
- break;
- }
-
- return offset;
-}
-
/* USB device initialization */
static int request_fw_file(
if (r)
goto error;
- r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START_OFFSET,
- REBOOT);
+ r = upload_code(udev, ur_fw->data, ur_fw->size, FW_START, REBOOT);
if (r)
goto error;
- offset = ((EEPROM_REGS_OFFSET + EEPROM_REGS_SIZE) * sizeof(u16));
+ offset = (E2P_BOOT_CODE_OFFSET * sizeof(u16));
r = upload_code(udev, ub_fw->data + offset, ub_fw->size - offset,
- E2P_BASE_OFFSET + EEPROM_REGS_SIZE, REBOOT);
+ E2P_START + E2P_BOOT_CODE_OFFSET, REBOOT);
/* At this point, the vendor driver downloads the whole firmware
* image, hacks around with version IDs, and uploads it again,
if (r)
goto error;
- fw_bcdDevice = get_word(ub_fw->data, EEPROM_REGS_OFFSET);
+ fw_bcdDevice = get_word(ub_fw->data, E2P_DATA_OFFSET);
if (fw_bcdDevice != bcdDevice) {
dev_info(&udev->dev,
if (r)
goto error;
- r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START_OFFSET,
- REBOOT);
+ r = upload_code(udev, uph_fw->data, uph_fw->size, FW_START, REBOOT);
if (r) {
dev_err(&udev->dev,
"Could not upload firmware code uph. Error number %d\n",
spin_lock_init(&intr->lock);
intr->interval = int_urb_interval(zd_usb_to_usbdev(usb));
init_completion(&intr->read_regs.completion);
- intr->read_regs.cr_int_addr = cpu_to_le16(usb_addr(usb, CR_INTERRUPT));
+ intr->read_regs.cr_int_addr = cpu_to_le16((u16)CR_INTERRUPT);
}
static inline void init_usb_rx(struct zd_usb *usb)
init_usb_rx(usb);
}
-int zd_usb_init_hw(struct zd_usb *usb)
-{
- int r;
- struct zd_chip *chip = zd_usb_to_chip(usb);
-
- ZD_ASSERT(mutex_is_locked(&chip->mutex));
- r = zd_ioread16_locked(chip, &usb->fw_base_offset,
- USB_REG((u16)FW_BASE_ADDR_OFFSET));
- if (r)
- return r;
- dev_dbg_f(zd_usb_dev(usb), "fw_base_offset: %#06hx\n",
- usb->fw_base_offset);
-
- return 0;
-}
-
void zd_usb_clear(struct zd_usb *usb)
{
usb_set_intfdata(usb->intf, NULL);
return -ENOMEM;
req->id = cpu_to_le16(USB_REQ_READ_REGS);
for (i = 0; i < count; i++)
- req->addr[i] = cpu_to_le16(usb_addr(usb, addresses[i]));
+ req->addr[i] = cpu_to_le16((u16)addresses[i]);
udev = zd_usb_to_usbdev(usb);
prepare_read_regs_int(usb);
req->id = cpu_to_le16(USB_REQ_WRITE_REGS);
for (i = 0; i < count; i++) {
struct reg_data *rw = &req->reg_writes[i];
- rw->addr = cpu_to_le16(usb_addr(usb, ioreqs[i].addr));
+ rw->addr = cpu_to_le16((u16)ioreqs[i].addr);
rw->value = cpu_to_le16(ioreqs[i].value);
}
#include <linux/usb.h>
#include "zd_def.h"
-#include "zd_types.h"
enum devicetype {
DEVICE_ZD1211 = 0,
spinlock_t lock;
};
-/* Contains the usb parts. The structure doesn't require a lock, because intf
- * and fw_base_offset, will not be changed after initialization.
+/* Contains the usb parts. The structure doesn't require a lock because intf
+ * will not be changed after initialization.
*/
struct zd_usb {
struct zd_usb_interrupt intr;
struct zd_usb_rx rx;
struct zd_usb_tx tx;
struct usb_interface *intf;
- u16 fw_base_offset;
};
#define zd_usb_dev(usb) (&usb->intf->dev)
When in doubt, say N.
-config HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
- bool "Use polling mechanism for hot-plug events (for testing purpose)"
- depends on HOTPLUG_PCI_SHPC
- help
- Say Y here if you want to use the polling mechanism for hot-plug
- events for early platform testing.
-
- When in doubt, say N.
-
config HOTPLUG_PCI_RPA
tristate "RPA PCI Hotplug driver"
depends on HOTPLUG_PCI && PPC_PSERIES && PPC64 && !HOTPLUG_PCI_FAKE
goto out;
table = obj->buffer.pointer;
- switch (((acpi_table_entry_header *)table)->type) {
- case ACPI_MADT_IOSAPIC:
- *gsi_base = ((struct acpi_table_iosapic *)table)->global_irq_base;
+ switch (((struct acpi_subtable_header *)table)->type) {
+ case ACPI_MADT_TYPE_IO_SAPIC:
+ *gsi_base = ((struct acpi_madt_io_sapic *)table)->global_irq_base;
result = 0;
break;
- case ACPI_MADT_IOAPIC:
- *gsi_base = ((struct acpi_table_ioapic *)table)->global_irq_base;
+ case ACPI_MADT_TYPE_IO_APIC:
+ *gsi_base = ((struct acpi_madt_io_apic *)table)->global_irq_base;
result = 0;
break;
default:
extern int pciehp_debug;
extern int pciehp_force;
-/*#define dbg(format, arg...) do { if (pciehp_debug) printk(KERN_DEBUG "%s: " format, MY_NAME , ## arg); } while (0)*/
-#define dbg(format, arg...) do { if (pciehp_debug) printk("%s: " format, MY_NAME , ## arg); } while (0)
-#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
-#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
-#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
-
+#define dbg(format, arg...) \
+ do { \
+ if (pciehp_debug) \
+ printk("%s: " format, MY_NAME , ## arg); \
+ } while (0)
+#define err(format, arg...) \
+ printk(KERN_ERR "%s: " format, MY_NAME , ## arg)
+#define info(format, arg...) \
+ printk(KERN_INFO "%s: " format, MY_NAME , ## arg)
+#define warn(format, arg...) \
+ printk(KERN_WARNING "%s: " format, MY_NAME , ## arg)
+#define SLOT_NAME_SIZE 10
struct slot {
- struct slot *next;
u8 bus;
u8 device;
u32 number;
struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
struct list_head slot_list;
+ char name[SLOT_NAME_SIZE];
+ unsigned long last_emi_toggle;
};
struct event_info {
u8 hp_slot;
};
-typedef u8(*php_intr_callback_t) (u8 hp_slot, void *instance_id);
-
-struct php_ctlr_state_s {
- struct php_ctlr_state_s *pnext;
- struct pci_dev *pci_dev;
- unsigned int irq;
- unsigned long flags; /* spinlock's */
- u32 slot_device_offset;
- u32 num_slots;
- struct timer_list int_poll_timer; /* Added for poll event */
- php_intr_callback_t attention_button_callback;
- php_intr_callback_t switch_change_callback;
- php_intr_callback_t presence_change_callback;
- php_intr_callback_t power_fault_callback;
- void *callback_instance_id;
- struct ctrl_reg *creg; /* Ptr to controller register space */
-};
-
#define MAX_EVENTS 10
struct controller {
struct controller *next;
struct mutex crit_sect; /* critical section mutex */
struct mutex ctrl_lock; /* controller lock */
- struct php_ctlr_state_s *hpc_ctlr_handle; /* HPC controller handle */
int num_slots; /* Number of slots on ctlr */
int slot_num_inc; /* 1 or -1 */
struct pci_dev *pci_dev;
- struct pci_bus *pci_bus;
+ struct list_head slot_list;
struct event_info event_queue[MAX_EVENTS];
struct slot *slot;
struct hpc_ops *hpc_ops;
u8 ctrlcap;
u16 vendor_id;
u8 cap_base;
+ struct timer_list poll_timer;
+ volatile int cmd_busy;
};
#define INT_BUTTON_IGNORE 0
#define POWERON_STATE 3
#define POWEROFF_STATE 4
-#define PCI_TO_PCI_BRIDGE_CLASS 0x00060400
-
/* Error messages */
#define INTERLOCK_OPEN 0x00000002
#define ADD_NOT_SUPPORTED 0x00000003
#define WRONG_BUS_FREQUENCY 0x0000000D
#define POWER_FAILURE 0x0000000E
-#define REMOVE_NOT_SUPPORTED 0x00000003
-
-#define DISABLE_CARD 1
-
/* Field definitions in Slot Capabilities Register */
#define ATTN_BUTTN_PRSN 0x00000001
#define PWR_CTRL_PRSN 0x00000002
#define ATTN_LED_PRSN 0x00000008
#define PWR_LED_PRSN 0x00000010
#define HP_SUPR_RM_SUP 0x00000020
+#define EMI_PRSN 0x00020000
#define ATTN_BUTTN(cap) (cap & ATTN_BUTTN_PRSN)
#define POWER_CTRL(cap) (cap & PWR_CTRL_PRSN)
#define ATTN_LED(cap) (cap & ATTN_LED_PRSN)
#define PWR_LED(cap) (cap & PWR_LED_PRSN)
#define HP_SUPR_RM(cap) (cap & HP_SUPR_RM_SUP)
-
-/*
- * error Messages
- */
-#define msg_initialization_err "Initialization failure, error=%d\n"
-#define msg_button_on "PCI slot #%s - powering on due to button press.\n"
-#define msg_button_off "PCI slot #%s - powering off due to button press.\n"
-#define msg_button_cancel "PCI slot #%s - action canceled due to button press.\n"
-#define msg_button_ignore "PCI slot #%s - button press ignored. (action in progress...)\n"
-
-/* controller functions */
-extern int pciehp_event_start_thread (void);
-extern void pciehp_event_stop_thread (void);
-extern int pciehp_enable_slot (struct slot *slot);
-extern int pciehp_disable_slot (struct slot *slot);
-
-extern u8 pciehp_handle_attention_button (u8 hp_slot, void *inst_id);
-extern u8 pciehp_handle_switch_change (u8 hp_slot, void *inst_id);
-extern u8 pciehp_handle_presence_change (u8 hp_slot, void *inst_id);
-extern u8 pciehp_handle_power_fault (u8 hp_slot, void *inst_id);
-/* extern void long_delay (int delay); */
-
-/* pci functions */
-extern int pciehp_configure_device (struct slot *p_slot);
-extern int pciehp_unconfigure_device (struct slot *p_slot);
-
-
+#define EMI(cap) (cap & EMI_PRSN)
+
+extern int pciehp_event_start_thread(void);
+extern void pciehp_event_stop_thread(void);
+extern int pciehp_enable_slot(struct slot *slot);
+extern int pciehp_disable_slot(struct slot *slot);
+extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl);
+extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl);
+extern int pciehp_configure_device(struct slot *p_slot);
+extern int pciehp_unconfigure_device(struct slot *p_slot);
+int pcie_init(struct controller *ctrl, struct pcie_device *dev);
/* Global variables */
extern struct controller *pciehp_ctrl_list;
-/* Inline functions */
-
static inline struct slot *pciehp_find_slot(struct controller *ctrl, u8 device)
{
- struct slot *p_slot, *tmp_slot = NULL;
-
- p_slot = ctrl->slot;
+ struct slot *slot;
- while (p_slot && (p_slot->device != device)) {
- tmp_slot = p_slot;
- p_slot = p_slot->next;
+ list_for_each_entry(slot, &ctrl->slot_list, slot_list) {
+ if (slot->device == device)
+ return slot;
}
- if (p_slot == NULL) {
- err("ERROR: pciehp_find_slot device=0x%x\n", device);
- p_slot = tmp_slot;
- }
-
- return p_slot;
-}
-
-static inline int wait_for_ctrl_irq(struct controller *ctrl)
-{
- int retval = 0;
-
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(&ctrl->queue, &wait);
- if (!pciehp_poll_mode)
- /* Sleep for up to 1 second */
- msleep_interruptible(1000);
- else
- msleep_interruptible(2500);
-
- remove_wait_queue(&ctrl->queue, &wait);
- if (signal_pending(current))
- retval = -EINTR;
-
- return retval;
-}
-
-#define SLOT_NAME_SIZE 10
-static inline void make_slot_name(char *buffer, int buffer_size, struct slot *slot)
-{
- snprintf(buffer, buffer_size, "%04d_%04d", slot->bus, slot->number);
+ err("%s: slot (device=0x%x) not found\n", __FUNCTION__, device);
+ return NULL;
}
-enum php_ctlr_type {
- PCI,
- ISA,
- ACPI
-};
-
-int pcie_init(struct controller *ctrl, struct pcie_device *dev);
-
-/* This has no meaning for PCI Express, as there is only 1 slot per port */
-int pcie_get_ctlr_slot_config(struct controller *ctrl,
- int *num_ctlr_slots,
- int *first_device_num,
- int *physical_slot_num,
- u8 *ctrlcap);
-
struct hpc_ops {
- int (*power_on_slot) (struct slot *slot);
- int (*power_off_slot) (struct slot *slot);
- int (*get_power_status) (struct slot *slot, u8 *status);
- int (*get_attention_status) (struct slot *slot, u8 *status);
- int (*set_attention_status) (struct slot *slot, u8 status);
- int (*get_latch_status) (struct slot *slot, u8 *status);
- int (*get_adapter_status) (struct slot *slot, u8 *status);
-
- int (*get_max_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
- int (*get_cur_bus_speed) (struct slot *slot, enum pci_bus_speed *speed);
-
- int (*get_max_lnk_width) (struct slot *slot, enum pcie_link_width *value);
- int (*get_cur_lnk_width) (struct slot *slot, enum pcie_link_width *value);
-
- int (*query_power_fault) (struct slot *slot);
- void (*green_led_on) (struct slot *slot);
- void (*green_led_off) (struct slot *slot);
- void (*green_led_blink) (struct slot *slot);
- void (*release_ctlr) (struct controller *ctrl);
- int (*check_lnk_status) (struct controller *ctrl);
+ int (*power_on_slot)(struct slot *slot);
+ int (*power_off_slot)(struct slot *slot);
+ int (*get_power_status)(struct slot *slot, u8 *status);
+ int (*get_attention_status)(struct slot *slot, u8 *status);
+ int (*set_attention_status)(struct slot *slot, u8 status);
+ int (*get_latch_status)(struct slot *slot, u8 *status);
+ int (*get_adapter_status)(struct slot *slot, u8 *status);
+ int (*get_emi_status)(struct slot *slot, u8 *status);
+ int (*toggle_emi)(struct slot *slot);
+ int (*get_max_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_cur_bus_speed)(struct slot *slot, enum pci_bus_speed *speed);
+ int (*get_max_lnk_width)(struct slot *slot, enum pcie_link_width *val);
+ int (*get_cur_lnk_width)(struct slot *slot, enum pcie_link_width *val);
+ int (*query_power_fault)(struct slot *slot);
+ void (*green_led_on)(struct slot *slot);
+ void (*green_led_off)(struct slot *slot);
+ void (*green_led_blink)(struct slot *slot);
+ void (*release_ctlr)(struct controller *ctrl);
+ int (*check_lnk_status)(struct controller *ctrl);
};
-
#ifdef CONFIG_ACPI
#include <acpi/acpi.h>
#include <acpi/acpi_bus.h>
#include <acpi/actypes.h>
#include <linux/pci-acpi.h>
-#define pciehp_get_hp_hw_control_from_firmware(dev) \
+#define pciehp_get_hp_hw_control_from_firmware(dev) \
pciehp_acpi_get_hp_hw_control_from_firmware(dev)
static inline int pciehp_get_hp_params_from_firmware(struct pci_dev *dev,
struct hotplug_params *hpp)
#include <linux/pci.h>
#include "pciehp.h"
#include <linux/interrupt.h>
+#include <linux/time.h>
/* Global variables */
int pciehp_debug;
.get_cur_bus_speed = get_cur_bus_speed,
};
+/*
+ * Check the status of the Electro Mechanical Interlock (EMI)
+ */
+static int get_lock_status(struct hotplug_slot *hotplug_slot, u8 *value)
+{
+ struct slot *slot = hotplug_slot->private;
+ return (slot->hpc_ops->get_emi_status(slot, value));
+}
+
+/*
+ * sysfs interface for the Electro Mechanical Interlock (EMI)
+ * 1 == locked, 0 == unlocked
+ */
+static ssize_t lock_read_file(struct hotplug_slot *slot, char *buf)
+{
+ int retval;
+ u8 value;
+
+ retval = get_lock_status(slot, &value);
+ if (retval)
+ goto lock_read_exit;
+ retval = sprintf (buf, "%d\n", value);
+
+lock_read_exit:
+ return retval;
+}
+
+/*
+ * Change the status of the Electro Mechanical Interlock (EMI)
+ * This is a toggle - in addition there must be at least 1 second
+ * in between toggles.
+ */
+static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status)
+{
+ struct slot *slot = hotplug_slot->private;
+ int retval;
+ u8 value;
+
+ mutex_lock(&slot->ctrl->crit_sect);
+
+ /* has it been >1 sec since our last toggle? */
+ if ((get_seconds() - slot->last_emi_toggle) < 1)
+ return -EINVAL;
+
+ /* see what our current state is */
+ retval = get_lock_status(hotplug_slot, &value);
+ if (retval || (value == status))
+ goto set_lock_exit;
+
+ slot->hpc_ops->toggle_emi(slot);
+set_lock_exit:
+ mutex_unlock(&slot->ctrl->crit_sect);
+ return 0;
+}
+
+/*
+ * sysfs interface which allows the user to toggle the Electro Mechanical
+ * Interlock. Valid values are either 0 or 1. 0 == unlock, 1 == lock
+ */
+static ssize_t lock_write_file(struct hotplug_slot *slot, const char *buf,
+ size_t count)
+{
+ unsigned long llock;
+ u8 lock;
+ int retval = 0;
+
+ llock = simple_strtoul(buf, NULL, 10);
+ lock = (u8)(llock & 0xff);
+
+ switch (lock) {
+ case 0:
+ case 1:
+ retval = set_lock_status(slot, lock);
+ break;
+ default:
+ err ("%d is an invalid lock value\n", lock);
+ retval = -EINVAL;
+ }
+ if (retval)
+ return retval;
+ return count;
+}
+
+static struct hotplug_slot_attribute hotplug_slot_attr_lock = {
+ .attr = {.name = "lock", .mode = S_IFREG | S_IRUGO | S_IWUSR},
+ .show = lock_read_file,
+ .store = lock_write_file
+};
+
/**
* release_slot - free up the memory used by a slot
* @hotplug_slot: slot to free
dbg("%s - physical_slot = %s\n", __FUNCTION__, hotplug_slot->name);
kfree(slot->hotplug_slot->info);
- kfree(slot->hotplug_slot->name);
kfree(slot->hotplug_slot);
kfree(slot);
}
+static void make_slot_name(struct slot *slot)
+{
+ snprintf(slot->hotplug_slot->name, SLOT_NAME_SIZE, "%04d_%04d",
+ slot->bus, slot->number);
+}
+
static int init_slots(struct controller *ctrl)
{
struct slot *slot;
- struct hpc_ops *hpc_ops;
struct hotplug_slot *hotplug_slot;
- struct hotplug_slot_info *hotplug_slot_info;
- u8 number_of_slots;
- u8 slot_device;
- u32 slot_number;
- int result = -ENOMEM;
+ struct hotplug_slot_info *info;
+ int retval = -ENOMEM;
+ int i;
- number_of_slots = ctrl->num_slots;
- slot_device = ctrl->slot_device_offset;
- slot_number = ctrl->first_slot;
-
- while (number_of_slots) {
+ for (i = 0; i < ctrl->num_slots; i++) {
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
if (!slot)
goto error;
- slot->hotplug_slot =
- kzalloc(sizeof(*(slot->hotplug_slot)),
- GFP_KERNEL);
- if (!slot->hotplug_slot)
+ hotplug_slot = kzalloc(sizeof(*hotplug_slot), GFP_KERNEL);
+ if (!hotplug_slot)
goto error_slot;
- hotplug_slot = slot->hotplug_slot;
+ slot->hotplug_slot = hotplug_slot;
- hotplug_slot->info =
- kzalloc(sizeof(*(hotplug_slot->info)),
- GFP_KERNEL);
- if (!hotplug_slot->info)
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
+ if (!info)
goto error_hpslot;
- hotplug_slot_info = hotplug_slot->info;
- hotplug_slot->name = kmalloc(SLOT_NAME_SIZE, GFP_KERNEL);
- if (!hotplug_slot->name)
- goto error_info;
+ hotplug_slot->info = info;
- slot->ctrl = ctrl;
- slot->bus = ctrl->slot_bus;
- slot->device = slot_device;
- slot->hpc_ops = hpc_ops = ctrl->hpc_ops;
+ hotplug_slot->name = slot->name;
+ slot->hp_slot = i;
+ slot->ctrl = ctrl;
+ slot->bus = ctrl->pci_dev->subordinate->number;
+ slot->device = ctrl->slot_device_offset + i;
+ slot->hpc_ops = ctrl->hpc_ops;
slot->number = ctrl->first_slot;
- slot->hp_slot = slot_device - ctrl->slot_device_offset;
/* register this slot with the hotplug pci core */
hotplug_slot->private = slot;
hotplug_slot->release = &release_slot;
- make_slot_name(hotplug_slot->name, SLOT_NAME_SIZE, slot);
+ make_slot_name(slot);
hotplug_slot->ops = &pciehp_hotplug_slot_ops;
- hpc_ops->get_power_status(slot,
- &(hotplug_slot_info->power_status));
- hpc_ops->get_attention_status(slot,
- &(hotplug_slot_info->attention_status));
- hpc_ops->get_latch_status(slot,
- &(hotplug_slot_info->latch_status));
- hpc_ops->get_adapter_status(slot,
- &(hotplug_slot_info->adapter_status));
+ get_power_status(hotplug_slot, &info->power_status);
+ get_attention_status(hotplug_slot, &info->attention_status);
+ get_latch_status(hotplug_slot, &info->latch_status);
+ get_adapter_status(hotplug_slot, &info->adapter_status);
dbg("Registering bus=%x dev=%x hp_slot=%x sun=%x "
- "slot_device_offset=%x\n",
- slot->bus, slot->device, slot->hp_slot, slot->number,
- ctrl->slot_device_offset);
- result = pci_hp_register(hotplug_slot);
- if (result) {
- err ("pci_hp_register failed with error %d\n", result);
- goto error_name;
+ "slot_device_offset=%x\n", slot->bus, slot->device,
+ slot->hp_slot, slot->number, ctrl->slot_device_offset);
+ retval = pci_hp_register(hotplug_slot);
+ if (retval) {
+ err ("pci_hp_register failed with error %d\n", retval);
+ goto error_info;
+ }
+ /* create additional sysfs entries */
+ if (EMI(ctrl->ctrlcap)) {
+ retval = sysfs_create_file(&hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
+ if (retval) {
+ pci_hp_deregister(hotplug_slot);
+ err("cannot create additional sysfs entries\n");
+ goto error_info;
+ }
}
- slot->next = ctrl->slot;
- ctrl->slot = slot;
-
- number_of_slots--;
- slot_device++;
- slot_number += ctrl->slot_num_inc;
+ list_add(&slot->slot_list, &ctrl->slot_list);
}
return 0;
-
-error_name:
- kfree(hotplug_slot->name);
error_info:
- kfree(hotplug_slot_info);
+ kfree(info);
error_hpslot:
kfree(hotplug_slot);
error_slot:
kfree(slot);
error:
- return result;
-}
-
-
-static int cleanup_slots (struct controller * ctrl)
-{
- struct slot *old_slot, *next_slot;
-
- old_slot = ctrl->slot;
- ctrl->slot = NULL;
-
- while (old_slot) {
- next_slot = old_slot->next;
- pci_hp_deregister (old_slot->hotplug_slot);
- old_slot = next_slot;
- }
-
-
- return(0);
+ return retval;
}
-static int get_ctlr_slot_config(struct controller *ctrl)
+static void cleanup_slots(struct controller *ctrl)
{
- int num_ctlr_slots; /* Not needed; PCI Express has 1 slot per port*/
- int first_device_num; /* Not needed */
- int physical_slot_num;
- u8 ctrlcap;
- int rc;
+ struct list_head *tmp;
+ struct list_head *next;
+ struct slot *slot;
- rc = pcie_get_ctlr_slot_config(ctrl, &num_ctlr_slots, &first_device_num, &physical_slot_num, &ctrlcap);
- if (rc) {
- err("%s: get_ctlr_slot_config fail for b:d (%x:%x)\n", __FUNCTION__, ctrl->bus, ctrl->device);
- return (-1);
+ list_for_each_safe(tmp, next, &ctrl->slot_list) {
+ slot = list_entry(tmp, struct slot, slot_list);
+ list_del(&slot->slot_list);
+ if (EMI(ctrl->ctrlcap))
+ sysfs_remove_file(&slot->hotplug_slot->kobj,
+ &hotplug_slot_attr_lock.attr);
+ pci_hp_deregister(slot->hotplug_slot);
}
-
- ctrl->num_slots = num_ctlr_slots; /* PCI Express has 1 slot per port */
- ctrl->slot_device_offset = first_device_num;
- ctrl->first_slot = physical_slot_num;
- ctrl->ctrlcap = ctrlcap;
-
- dbg("%s: bus(0x%x) num_slot(0x%x) 1st_dev(0x%x) psn(0x%x) ctrlcap(%x) for b:d (%x:%x)\n",
- __FUNCTION__, ctrl->slot_bus, num_ctlr_slots, first_device_num, physical_slot_num, ctrlcap,
- ctrl->bus, ctrl->device);
-
- return (0);
}
-
/*
* set_attention_status - Turns the Amber LED for a slot on, off or blink
*/
int rc;
struct controller *ctrl;
struct slot *t_slot;
- int first_device_num = 0 ; /* first PCI device number supported by this PCIE */
- int num_ctlr_slots; /* number of slots supported by this HPC */
u8 value;
struct pci_dev *pdev;
err("%s : out of memory\n", __FUNCTION__);
goto err_out_none;
}
+ INIT_LIST_HEAD(&ctrl->slot_list);
pdev = dev->port;
ctrl->pci_dev = pdev;
pci_set_drvdata(pdev, ctrl);
- ctrl->pci_bus = kmalloc(sizeof(*ctrl->pci_bus), GFP_KERNEL);
- if (!ctrl->pci_bus) {
- err("%s: out of memory\n", __FUNCTION__);
- rc = -ENOMEM;
- goto err_out_unmap_mmio_region;
- }
- memcpy (ctrl->pci_bus, pdev->bus, sizeof (*ctrl->pci_bus));
ctrl->bus = pdev->bus->number; /* ctrl bus */
ctrl->slot_bus = pdev->subordinate->number; /* bus controlled by this HPC */
dbg("%s: ctrl bus=0x%x, device=%x, function=%x, irq=%x\n", __FUNCTION__,
ctrl->bus, ctrl->device, ctrl->function, pdev->irq);
- /*
- * Save configuration headers for this and subordinate PCI buses
- */
-
- rc = get_ctlr_slot_config(ctrl);
- if (rc) {
- err(msg_initialization_err, rc);
- goto err_out_free_ctrl_bus;
- }
- first_device_num = ctrl->slot_device_offset;
- num_ctlr_slots = ctrl->num_slots;
-
/* Setup the slot information structures */
rc = init_slots(ctrl);
if (rc) {
- err(msg_initialization_err, 6);
- goto err_out_free_ctrl_slot;
+ err("%s: slot initialization failed\n", PCIE_MODULE_NAME);
+ goto err_out_release_ctlr;
}
- t_slot = pciehp_find_slot(ctrl, first_device_num);
+ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
/* Finish setting up the hot plug ctrl device */
ctrl->next_event = 0;
pciehp_ctrl_list = ctrl;
}
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
t_slot->hpc_ops->get_adapter_status(t_slot, &value); /* Check if slot is occupied */
-
if ((POWER_CTRL(ctrl->ctrlcap)) && !value) {
rc = t_slot->hpc_ops->power_off_slot(t_slot); /* Power off slot if not occupied*/
- if (rc) {
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
+ if (rc)
goto err_out_free_ctrl_slot;
- } else
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
}
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
-
return 0;
err_out_free_ctrl_slot:
cleanup_slots(ctrl);
-err_out_free_ctrl_bus:
- kfree(ctrl->pci_bus);
-err_out_unmap_mmio_region:
+err_out_release_ctlr:
ctrl->hpc_ops->release_ctlr(ctrl);
err_out_free_ctrl:
kfree(ctrl);
while (ctrl) {
cleanup_slots(ctrl);
- kfree (ctrl->pci_bus);
-
ctrl->hpc_ops->release_ctlr(ctrl);
tctrl = ctrl;
return p_slot->hotplug_slot->name;
}
-u8 pciehp_handle_attention_button(u8 hp_slot, void *inst_id)
+u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
}
-u8 pciehp_handle_switch_change(u8 hp_slot, void *inst_id)
+u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
u8 getstatus;
return rc;
}
-u8 pciehp_handle_presence_change(u8 hp_slot, void *inst_id)
+u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 presence_save, rc = 0;
struct event_info *taskInfo;
return rc;
}
-u8 pciehp_handle_power_fault(u8 hp_slot, void *inst_id)
+u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl)
{
- struct controller *ctrl = (struct controller *) inst_id;
struct slot *p_slot;
u8 rc = 0;
struct event_info *taskInfo;
static void set_slot_off(struct controller *ctrl, struct slot * pslot)
{
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
/* turn off slot, turn on Amber LED, turn off Green LED if supported*/
if (POWER_CTRL(ctrl->ctrlcap)) {
if (pslot->hpc_ops->power_off_slot(pslot)) {
- err("%s: Issue of Slot Power Off command failed\n", __FUNCTION__);
- mutex_unlock(&ctrl->ctrl_lock);
+ err("%s: Issue of Slot Power Off command failed\n",
+ __FUNCTION__);
return;
}
- wait_for_ctrl_irq (ctrl);
}
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
pslot->hpc_ops->green_led_off(pslot);
- wait_for_ctrl_irq (ctrl);
- }
- if (ATTN_LED(ctrl->ctrlcap)) {
- if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
- err("%s: Issue of Set Attention Led command failed\n", __FUNCTION__);
- mutex_unlock(&ctrl->ctrl_lock);
+ if (ATTN_LED(ctrl->ctrlcap)) {
+ if (pslot->hpc_ops->set_attention_status(pslot, 1)) {
+ err("%s: Issue of Set Attention Led command failed\n",
+ __FUNCTION__);
return;
}
- wait_for_ctrl_irq (ctrl);
}
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
}
/**
static int board_added(struct slot *p_slot)
{
u8 hp_slot;
- int rc = 0;
+ int retval = 0;
struct controller *ctrl = p_slot->ctrl;
hp_slot = p_slot->device - ctrl->slot_device_offset;
__FUNCTION__, p_slot->device,
ctrl->slot_device_offset, hp_slot);
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
if (POWER_CTRL(ctrl->ctrlcap)) {
/* Power on slot */
- rc = p_slot->hpc_ops->power_on_slot(p_slot);
- if (rc) {
- mutex_unlock(&ctrl->ctrl_lock);
- return -1;
- }
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
+ retval = p_slot->hpc_ops->power_on_slot(p_slot);
+ if (retval)
+ return retval;
}
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_blink(p_slot);
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
/* Wait for ~1 second */
- wait_for_ctrl_irq (ctrl);
+ msleep(1000);
- /* Check link training status */
- rc = p_slot->hpc_ops->check_lnk_status(ctrl);
- if (rc) {
+ /* Check link training status */
+ retval = p_slot->hpc_ops->check_lnk_status(ctrl);
+ if (retval) {
err("%s: Failed to check link status\n", __FUNCTION__);
set_slot_off(ctrl, p_slot);
- return rc;
+ return retval;
}
/* Check for a power fault */
if (p_slot->hpc_ops->query_power_fault(p_slot)) {
dbg("%s: power fault detected\n", __FUNCTION__);
- rc = POWER_FAILURE;
+ retval = POWER_FAILURE;
goto err_exit;
}
- rc = pciehp_configure_device(p_slot);
- if (rc) {
+ retval = pciehp_configure_device(p_slot);
+ if (retval) {
err("Cannot add device 0x%x:%x\n", p_slot->bus,
- p_slot->device);
+ p_slot->device);
goto err_exit;
}
*/
if (pcie_mch_quirk)
pci_fixup_device(pci_fixup_final, ctrl->pci_dev);
- if (PWR_LED(ctrl->ctrlcap)) {
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_on(p_slot);
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
- }
+
return 0;
err_exit:
set_slot_off(ctrl, p_slot);
- return -1;
+ return retval;
}
-
/**
* remove_board - Turns off slot and LED's
*
{
u8 device;
u8 hp_slot;
- int rc;
+ int retval = 0;
struct controller *ctrl = p_slot->ctrl;
- if (pciehp_unconfigure_device(p_slot))
- return 1;
+ retval = pciehp_unconfigure_device(p_slot);
+ if (retval)
+ return retval;
device = p_slot->device;
-
hp_slot = p_slot->device - ctrl->slot_device_offset;
p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
dbg("In %s, hp_slot = %d\n", __FUNCTION__, hp_slot);
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
if (POWER_CTRL(ctrl->ctrlcap)) {
/* power off slot */
- rc = p_slot->hpc_ops->power_off_slot(p_slot);
- if (rc) {
- err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
- mutex_unlock(&ctrl->ctrl_lock);
- return rc;
+ retval = p_slot->hpc_ops->power_off_slot(p_slot);
+ if (retval) {
+ err("%s: Issue of Slot Disable command failed\n",
+ __FUNCTION__);
+ return retval;
}
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
}
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
/* turn off Green LED */
p_slot->hpc_ops->green_led_off(p_slot);
-
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
return 0;
}
dbg("%s: adding bus:device(%x:%x)\n", __FUNCTION__,
p_slot->bus, p_slot->device);
- if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
- /* Wait for exclusive access to hardware */
- mutex_lock(&p_slot->ctrl->ctrl_lock);
-
+ if (pciehp_enable_slot(p_slot) &&
+ PWR_LED(p_slot->ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (p_slot->ctrl);
-
- /* Done with exclusive hardware access */
- mutex_unlock(&p_slot->ctrl->ctrl_lock);
- }
p_slot->state = STATIC_STATE;
}
dbg("%s: adding bus:device(%x:%x)\n",
__FUNCTION__, p_slot->bus, p_slot->device);
- if (pciehp_enable_slot(p_slot) && PWR_LED(p_slot->ctrl->ctrlcap)) {
- /* Wait for exclusive access to hardware */
- mutex_lock(&p_slot->ctrl->ctrl_lock);
-
+ if (pciehp_enable_slot(p_slot) &&
+ PWR_LED(p_slot->ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (p_slot->ctrl);
-
- /* Done with exclusive hardware access */
- mutex_unlock(&p_slot->ctrl->ctrl_lock);
- }
p_slot->state = STATIC_STATE;
}
switch (p_slot->state) {
case BLINKINGOFF_STATE:
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_on(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
- if (ATTN_LED(ctrl->ctrlcap)) {
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
+ if (ATTN_LED(ctrl->ctrlcap))
+ p_slot->hpc_ops->set_attention_status(p_slot, 0);
break;
case BLINKINGON_STATE:
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
- if (ATTN_LED(ctrl->ctrlcap)){
- p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
+ if (ATTN_LED(ctrl->ctrlcap))
+ p_slot->hpc_ops->set_attention_status(p_slot, 0);
break;
default:
warn("Not a valid state\n");
return;
}
- info(msg_button_cancel, slot_name(p_slot));
+ info("PCI slot #%s - action canceled due to button press.\n", slot_name(p_slot));
p_slot->state = STATIC_STATE;
}
/* ***********Button Pressed (No action on 1st press...) */
/* slot is on */
dbg("slot is on\n");
p_slot->state = BLINKINGOFF_STATE;
- info(msg_button_off, slot_name(p_slot));
+ info("PCI slot #%s - powering off due to button press.\n", slot_name(p_slot));
} else {
/* slot is off */
dbg("slot is off\n");
p_slot->state = BLINKINGON_STATE;
- info(msg_button_on, slot_name(p_slot));
+ info("PCI slot #%s - powering on due to button press.\n", slot_name(p_slot));
}
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
/* blink green LED and turn off amber */
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_blink(p_slot);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
- if (ATTN_LED(ctrl->ctrlcap)) {
+ if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 0);
- /* Wait for the command to complete */
- wait_for_ctrl_irq (ctrl);
- }
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
-
init_timer(&p_slot->task_event);
p_slot->task_event.expires = jiffies + 5 * HZ; /* 5 second delay */
p_slot->task_event.function = (void (*)(unsigned long)) pushbutton_helper_thread;
else if (ctrl->event_queue[loop].event_type == INT_POWER_FAULT) {
if (POWER_CTRL(ctrl->ctrlcap)) {
dbg("power fault\n");
- /* Wait for exclusive access to hardware */
- mutex_lock(&ctrl->ctrl_lock);
-
- if (ATTN_LED(ctrl->ctrlcap)) {
+ if (ATTN_LED(ctrl->ctrlcap))
p_slot->hpc_ops->set_attention_status(p_slot, 1);
- wait_for_ctrl_irq (ctrl);
- }
- if (PWR_LED(ctrl->ctrlcap)) {
+ if (PWR_LED(ctrl->ctrlcap))
p_slot->hpc_ops->green_led_off(p_slot);
- wait_for_ctrl_irq (ctrl);
- }
-
- /* Done with exclusive hardware access */
- mutex_unlock(&ctrl->ctrl_lock);
}
}
/***********SURPRISE REMOVAL********************/
}
}
-
int pciehp_enable_slot(struct slot *p_slot)
{
u8 getstatus = 0;
#include <linux/timer.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
+#include <linux/time.h>
#include "../pci.h"
#include "pciehp.h"
ROOTCTRL = offsetof(struct ctrl_reg, root_ctrl),
ROOTSTATUS = offsetof(struct ctrl_reg, root_status),
};
-static int pcie_cap_base = 0; /* Base of the PCI Express capability item structure */
-
-#define PCIE_CAP_ID(cb) ( cb + PCIECAPID )
-#define NXT_CAP_PTR(cb) ( cb + NXTCAPPTR )
-#define CAP_REG(cb) ( cb + CAPREG )
-#define DEV_CAP(cb) ( cb + DEVCAP )
-#define DEV_CTRL(cb) ( cb + DEVCTRL )
-#define DEV_STATUS(cb) ( cb + DEVSTATUS )
-#define LNK_CAP(cb) ( cb + LNKCAP )
-#define LNK_CTRL(cb) ( cb + LNKCTRL )
-#define LNK_STATUS(cb) ( cb + LNKSTATUS )
-#define SLOT_CAP(cb) ( cb + SLOTCAP )
-#define SLOT_CTRL(cb) ( cb + SLOTCTRL )
-#define SLOT_STATUS(cb) ( cb + SLOTSTATUS )
-#define ROOT_CTRL(cb) ( cb + ROOTCTRL )
-#define ROOT_STATUS(cb) ( cb + ROOTSTATUS )
-
-#define hp_register_read_word(pdev, reg , value) \
- pci_read_config_word(pdev, reg, &value)
-
-#define hp_register_read_dword(pdev, reg , value) \
- pci_read_config_dword(pdev, reg, &value)
-
-#define hp_register_write_word(pdev, reg , value) \
- pci_write_config_word(pdev, reg, value)
-
-#define hp_register_dwrite_word(pdev, reg , value) \
- pci_write_config_dword(pdev, reg, value)
+
+static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value)
+{
+ struct pci_dev *dev = ctrl->pci_dev;
+ return pci_read_config_word(dev, ctrl->cap_base + reg, value);
+}
+
+static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value)
+{
+ struct pci_dev *dev = ctrl->pci_dev;
+ return pci_read_config_dword(dev, ctrl->cap_base + reg, value);
+}
+
+static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value)
+{
+ struct pci_dev *dev = ctrl->pci_dev;
+ return pci_write_config_word(dev, ctrl->cap_base + reg, value);
+}
+
+static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value)
+{
+ struct pci_dev *dev = ctrl->pci_dev;
+ return pci_write_config_dword(dev, ctrl->cap_base + reg, value);
+}
/* Field definitions in PCI Express Capabilities Register */
#define CAP_VER 0x000F
#define ATTN_LED_CTRL 0x00C0
#define PWR_LED_CTRL 0x0300
#define PWR_CTRL 0x0400
+#define EMI_CTRL 0x0800
/* Attention indicator and Power indicator states */
#define LED_ON 0x01
#define POWER_ON 0
#define POWER_OFF 0x0400
+/* EMI Status defines */
+#define EMI_DISENGAGED 0
+#define EMI_ENGAGED 1
+
/* Field definitions in Slot Status Register */
#define ATTN_BUTTN_PRESSED 0x0001
#define PWR_FAULT_DETECTED 0x0002
#define CMD_COMPLETED 0x0010
#define MRL_STATE 0x0020
#define PRSN_STATE 0x0040
+#define EMI_STATE 0x0080
+#define EMI_STATUS_BIT 7
static spinlock_t hpc_event_lock;
DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
-static struct php_ctlr_state_s *php_ctlr_list_head; /* HPC state linked list */
static int ctlr_seq_num = 0; /* Controller sequence # */
-static spinlock_t list_lock;
-
-static irqreturn_t pcie_isr(int IRQ, void *dev_id);
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds);
+static irqreturn_t pcie_isr(int irq, void *dev_id);
+static void start_int_poll_timer(struct controller *ctrl, int sec);
/* This is the interrupt polling timeout function. */
-static void int_poll_timeout(unsigned long lphp_ctlr)
+static void int_poll_timeout(unsigned long data)
{
- struct php_ctlr_state_s *php_ctlr = (struct php_ctlr_state_s *)lphp_ctlr;
+ struct controller *ctrl = (struct controller *)data;
DBG_ENTER_ROUTINE
- if ( !php_ctlr ) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return;
- }
-
/* Poll for interrupt events. regs == NULL => polling */
- pcie_isr( 0, (void *)php_ctlr );
-
- init_timer(&php_ctlr->int_poll_timer);
+ pcie_isr(0, ctrl);
+ init_timer(&ctrl->poll_timer);
if (!pciehp_poll_time)
pciehp_poll_time = 2; /* reset timer to poll in 2 secs if user doesn't specify at module installation*/
- start_int_poll_timer(php_ctlr, pciehp_poll_time);
-
- return;
+ start_int_poll_timer(ctrl, pciehp_poll_time);
}
/* This function starts the interrupt polling timer. */
-static void start_int_poll_timer(struct php_ctlr_state_s *php_ctlr, int seconds)
+static void start_int_poll_timer(struct controller *ctrl, int sec)
{
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return;
- }
+ /* Clamp to sane value */
+ if ((sec <= 0) || (sec > 60))
+ sec = 2;
+
+ ctrl->poll_timer.function = &int_poll_timeout;
+ ctrl->poll_timer.data = (unsigned long)ctrl;
+ ctrl->poll_timer.expires = jiffies + sec * HZ;
+ add_timer(&ctrl->poll_timer);
+}
- if ( ( seconds <= 0 ) || ( seconds > 60 ) )
- seconds = 2; /* Clamp to sane value */
+static inline int pcie_wait_cmd(struct controller *ctrl)
+{
+ int retval = 0;
+ unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
+ unsigned long timeout = msecs_to_jiffies(msecs);
+ int rc;
- php_ctlr->int_poll_timer.function = &int_poll_timeout;
- php_ctlr->int_poll_timer.data = (unsigned long)php_ctlr; /* Instance data */
- php_ctlr->int_poll_timer.expires = jiffies + seconds * HZ;
- add_timer(&php_ctlr->int_poll_timer);
+ rc = wait_event_interruptible_timeout(ctrl->queue,
+ !ctrl->cmd_busy, timeout);
+ if (!rc)
+ dbg("Command not completed in 1000 msec\n");
+ else if (rc < 0) {
+ retval = -EINTR;
+ info("Command was interrupted by a signal\n");
+ }
- return;
+ return retval;
}
static int pcie_write_cmd(struct slot *slot, u16 cmd)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
int retval = 0;
u16 slot_status;
DBG_ENTER_ROUTINE
-
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
+ mutex_lock(&ctrl->ctrl_lock);
+
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
- return retval;
- }
-
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
+ goto out;
+ }
+
if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) {
- /* After 1 sec and CMD_COMPLETED still not set, just proceed forward to issue
- the next command according to spec. Just print out the error message */
- dbg("%s : CMD_COMPLETED not clear after 1 sec.\n", __FUNCTION__);
+ /* After 1 sec and CMD_COMPLETED still not set, just
+ proceed forward to issue the next command according
+ to spec. Just print out the error message */
+ dbg("%s: CMD_COMPLETED not clear after 1 sec.\n",
+ __FUNCTION__);
}
- retval = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), cmd | CMD_CMPL_INTR_ENABLE);
+ ctrl->cmd_busy = 1;
+ retval = pciehp_writew(ctrl, SLOTCTRL, (cmd | CMD_CMPL_INTR_ENABLE));
if (retval) {
- err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
- return retval;
+ err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
+ goto out;
}
+ /*
+ * Wait for command completion.
+ */
+ retval = pcie_wait_cmd(ctrl);
+ out:
+ mutex_unlock(&ctrl->ctrl_lock);
DBG_LEAVE_ROUTINE
return retval;
}
static int hpc_check_lnk_status(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
u16 lnk_status;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(ctrl->cap_base), lnk_status);
-
+ retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
if (retval) {
- err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read LNKSTATUS register\n", __FUNCTION__);
return retval;
}
static int hpc_get_attention_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
u8 atten_led_state;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
-
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x, value read %x\n", __FUNCTION__,SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
+ dbg("%s: SLOTCTRL %x, value read %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
atten_led_state = (slot_ctrl & ATTN_LED_CTRL) >> 6;
return 0;
}
-static int hpc_get_power_status(struct slot * slot, u8 *status)
+static int hpc_get_power_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_ctrl;
u8 pwr_state;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
-
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return retval;
}
- dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
+ dbg("%s: SLOTCTRL %x value read %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
pwr_state = (slot_ctrl & PWR_CTRL) >> 10;
static int hpc_get_latch_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_status;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
-
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
return retval;
}
static int hpc_get_adapter_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_status;
u8 card_state;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
-
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
return retval;
}
card_state = (u8)((slot_status & PRSN_STATE) >> 6);
return 0;
}
-static int hpc_query_power_fault(struct slot * slot)
+static int hpc_query_power_fault(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_status;
u8 pwr_fault;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(slot->ctrl->cap_base), slot_status);
-
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (retval) {
- err("%s : Cannot check for power fault\n", __FUNCTION__);
+ err("%s: Cannot check for power fault\n", __FUNCTION__);
return retval;
}
pwr_fault = (u8)((slot_status & PWR_FAULT_DETECTED) >> 1);
return pwr_fault;
}
-static int hpc_set_attention_status(struct slot *slot, u8 value)
+static int hpc_get_emi_status(struct slot *slot, u8 *status)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
+ u16 slot_status;
+ int retval = 0;
+
+ DBG_ENTER_ROUTINE
+
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
+ if (retval) {
+ err("%s : Cannot check EMI status\n", __FUNCTION__);
+ return retval;
+ }
+ *status = (slot_status & EMI_STATE) >> EMI_STATUS_BIT;
+
+ DBG_LEAVE_ROUTINE
+ return retval;
+}
+
+static int hpc_toggle_emi(struct slot *slot)
+{
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd = 0;
u16 slot_ctrl;
int rc = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
+ if (rc) {
+ err("%s : hp_register_read_word SLOT_CTRL failed\n",
+ __FUNCTION__);
+ return rc;
}
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
+ slot_cmd = (slot_ctrl | EMI_CTRL);
+ if (!pciehp_poll_mode)
+ slot_cmd = slot_cmd | HP_INTR_ENABLE;
+ pcie_write_cmd(slot, slot_cmd);
+ slot->last_emi_toggle = get_seconds();
+ DBG_LEAVE_ROUTINE
+ return rc;
+}
+
+static int hpc_set_attention_status(struct slot *slot, u8 value)
+{
+ struct controller *ctrl = slot->ctrl;
+ u16 slot_cmd = 0;
+ u16 slot_ctrl;
+ int rc = 0;
+
+ DBG_ENTER_ROUTINE
+
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return rc;
}
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
return rc;
static void hpc_set_green_led_on(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_ctrl;
int rc = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return ;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return ;
- }
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
-
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return;
}
slot_cmd = (slot_ctrl & ~PWR_LED_CTRL) | 0x0100;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
return;
}
static void hpc_set_green_led_off(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_ctrl;
int rc = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return ;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return ;
- }
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
-
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return;
}
if (!pciehp_poll_mode)
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n", __FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
return;
static void hpc_set_green_led_blink(struct slot *slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_ctrl;
int rc = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return ;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return ;
- }
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
-
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return;
}
slot_cmd = slot_cmd | HP_INTR_ENABLE;
pcie_write_cmd(slot, slot_cmd);
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
return;
}
-int pcie_get_ctlr_slot_config(struct controller *ctrl,
- int *num_ctlr_slots, /* number of slots in this HPC; only 1 in PCIE */
- int *first_device_num, /* PCI dev num of the first slot in this PCIE */
- int *physical_slot_num, /* phy slot num of the first slot in this PCIE */
- u8 *ctrlcap)
-{
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
- u32 slot_cap;
- int rc = 0;
-
- DBG_ENTER_ROUTINE
-
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- *first_device_num = 0;
- *num_ctlr_slots = 1;
-
- rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
-
- if (rc) {
- err("%s : hp_register_read_dword SLOT_CAP failed\n", __FUNCTION__);
- return -1;
- }
-
- *physical_slot_num = slot_cap >> 19;
- dbg("%s: PSN %d \n", __FUNCTION__, *physical_slot_num);
-
- *ctrlcap = slot_cap & 0x0000007f;
-
- DBG_LEAVE_ROUTINE
- return 0;
-}
-
static void hpc_release_ctlr(struct controller *ctrl)
{
- struct php_ctlr_state_s *php_ctlr = ctrl->hpc_ctlr_handle;
- struct php_ctlr_state_s *p, *p_prev;
-
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return ;
- }
-
- if (pciehp_poll_mode) {
- del_timer(&php_ctlr->int_poll_timer);
- } else {
- if (php_ctlr->irq) {
- free_irq(php_ctlr->irq, ctrl);
- php_ctlr->irq = 0;
- }
- }
- if (php_ctlr->pci_dev)
- php_ctlr->pci_dev = NULL;
-
- spin_lock(&list_lock);
- p = php_ctlr_list_head;
- p_prev = NULL;
- while (p) {
- if (p == php_ctlr) {
- if (p_prev)
- p_prev->pnext = p->pnext;
- else
- php_ctlr_list_head = p->pnext;
- break;
- } else {
- p_prev = p;
- p = p->pnext;
- }
- }
- spin_unlock(&list_lock);
-
- kfree(php_ctlr);
+ if (pciehp_poll_mode)
+ del_timer(&ctrl->poll_timer);
+ else
+ free_irq(ctrl->pci_dev->irq, ctrl);
DBG_LEAVE_ROUTINE
-
}
static int hpc_power_on_slot(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_ctrl, slot_status;
-
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot);
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
/* Clear sticky power-fault bit from previous power failures */
- hp_register_read_word(php_ctlr->pci_dev,
- SLOT_STATUS(slot->ctrl->cap_base), slot_status);
+ retval = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
+ if (retval) {
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
+ return retval;
+ }
slot_status &= PWR_FAULT_DETECTED;
- if (slot_status)
- hp_register_write_word(php_ctlr->pci_dev,
- SLOT_STATUS(slot->ctrl->cap_base), slot_status);
-
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
+ if (slot_status) {
+ retval = pciehp_writew(ctrl, SLOTSTATUS, slot_status);
+ if (retval) {
+ err("%s: Cannot write to SLOTSTATUS register\n",
+ __FUNCTION__);
+ return retval;
+ }
+ }
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return retval;
}
err("%s: Write %x command failed!\n", __FUNCTION__, slot_cmd);
return -1;
}
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
static int hpc_power_off_slot(struct slot * slot)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
u16 slot_cmd;
u16 slot_ctrl;
-
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
dbg("%s: slot->hp_slot %x\n", __FUNCTION__, slot->hp_slot);
- slot->hp_slot = 0;
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
- retval = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(slot->ctrl->cap_base), slot_ctrl);
+ retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (retval) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
return retval;
}
err("%s: Write command failed!\n", __FUNCTION__);
return -1;
}
- dbg("%s: SLOT_CTRL %x write cmd %x\n",__FUNCTION__, SLOT_CTRL(slot->ctrl->cap_base), slot_cmd);
+ dbg("%s: SLOTCTRL %x write cmd %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_cmd);
DBG_LEAVE_ROUTINE
return retval;
}
-static irqreturn_t pcie_isr(int IRQ, void *dev_id)
+static irqreturn_t pcie_isr(int irq, void *dev_id)
{
- struct controller *ctrl = NULL;
- struct php_ctlr_state_s *php_ctlr;
- u8 schedule_flag = 0;
+ struct controller *ctrl = (struct controller *)dev_id;
u16 slot_status, intr_detect, intr_loc;
u16 temp_word;
int hp_slot = 0; /* only 1 slot per PCI Express port */
int rc = 0;
- if (!dev_id)
- return IRQ_NONE;
-
- if (!pciehp_poll_mode) {
- ctrl = dev_id;
- php_ctlr = ctrl->hpc_ctlr_handle;
- } else {
- php_ctlr = dev_id;
- ctrl = (struct controller *)php_ctlr->callback_instance_id;
- }
-
- if (!ctrl) {
- dbg("%s: dev_id %p ctlr == NULL\n", __FUNCTION__, (void*) dev_id);
- return IRQ_NONE;
- }
-
- if (!php_ctlr) {
- dbg("%s: php_ctlr == NULL\n", __FUNCTION__);
- return IRQ_NONE;
- }
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
return IRQ_NONE;
}
dbg("%s: intr_loc %x\n", __FUNCTION__, intr_loc);
/* Mask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOT_CTRL register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
- dbg("%s: hp_register_read_word SLOT_CTRL with value %x\n", __FUNCTION__, temp_word);
+ dbg("%s: pciehp_readw(SLOTCTRL) with value %x\n",
+ __FUNCTION__, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
-
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTCTRL register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOT_STATUS register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
- dbg("%s: hp_register_read_word SLOT_STATUS with value %x\n", __FUNCTION__, slot_status);
+ dbg("%s: pciehp_readw(SLOTSTATUS) with value %x\n",
+ __FUNCTION__, slot_status);
/* Clear command complete interrupt caused by this write */
temp_word = 0x1f;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTSTATUS register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
}
/*
* Command Complete Interrupt Pending
*/
+ ctrl->cmd_busy = 0;
wake_up_interruptible(&ctrl->queue);
}
- if ((php_ctlr->switch_change_callback) && (intr_loc & MRL_SENS_CHANGED))
- schedule_flag += php_ctlr->switch_change_callback(
- hp_slot, php_ctlr->callback_instance_id);
- if ((php_ctlr->attention_button_callback) && (intr_loc & ATTN_BUTTN_PRESSED))
- schedule_flag += php_ctlr->attention_button_callback(
- hp_slot, php_ctlr->callback_instance_id);
- if ((php_ctlr->presence_change_callback) && (intr_loc & PRSN_DETECT_CHANGED))
- schedule_flag += php_ctlr->presence_change_callback(
- hp_slot , php_ctlr->callback_instance_id);
- if ((php_ctlr->power_fault_callback) && (intr_loc & PWR_FAULT_DETECTED))
- schedule_flag += php_ctlr->power_fault_callback(
- hp_slot, php_ctlr->callback_instance_id);
+ if (intr_loc & MRL_SENS_CHANGED)
+ pciehp_handle_switch_change(hp_slot, ctrl);
+
+ if (intr_loc & ATTN_BUTTN_PRESSED)
+ pciehp_handle_attention_button(hp_slot, ctrl);
+
+ if (intr_loc & PRSN_DETECT_CHANGED)
+ pciehp_handle_presence_change(hp_slot, ctrl);
+
+ if (intr_loc & PWR_FAULT_DETECTED)
+ pciehp_handle_power_fault(hp_slot, ctrl);
/* Clear all events after serving them */
temp_word = 0x1F;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
return IRQ_NONE;
}
/* Unmask Hot-plug Interrupt Enable */
if (!pciehp_poll_mode) {
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
dbg("%s: Unmask Hot-plug Interrupt Enable\n", __FUNCTION__);
temp_word = (temp_word & ~HP_INTR_ENABLE) | HP_INTR_ENABLE;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTCTRL register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
-
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOT_STATUS register\n",
+ __FUNCTION__);
return IRQ_NONE;
}
/* Clear command complete interrupt caused by this write */
temp_word = 0x1F;
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTSTATUS failed\n",
+ __FUNCTION__);
return IRQ_NONE;
}
- dbg("%s: hp_register_write_word SLOT_STATUS with value %x\n", __FUNCTION__, temp_word);
+ dbg("%s: pciehp_writew(SLOTSTATUS) with value %x\n",
+ __FUNCTION__, temp_word);
}
return IRQ_HANDLED;
static int hpc_get_max_lnk_speed (struct slot *slot, enum pci_bus_speed *value)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed;
u32 lnk_cap;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
-
+ retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap);
if (retval) {
- err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__);
+ err("%s: Cannot read LNKCAP register\n", __FUNCTION__);
return retval;
}
static int hpc_get_max_lnk_width (struct slot *slot, enum pcie_link_width *value)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
enum pcie_link_width lnk_wdth;
u32 lnk_cap;
int retval = 0;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_dword(php_ctlr->pci_dev, LNK_CAP(slot->ctrl->cap_base), lnk_cap);
-
+ retval = pciehp_readl(ctrl, LNKCAP, &lnk_cap);
if (retval) {
- err("%s : hp_register_read_dword LNK_CAP failed\n", __FUNCTION__);
+ err("%s: Cannot read LNKCAP register\n", __FUNCTION__);
return retval;
}
static int hpc_get_cur_lnk_speed (struct slot *slot, enum pci_bus_speed *value)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
int retval = 0;
u16 lnk_status;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
-
+ retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
if (retval) {
- err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read LNKSTATUS register\n", __FUNCTION__);
return retval;
}
static int hpc_get_cur_lnk_width (struct slot *slot, enum pcie_link_width *value)
{
- struct php_ctlr_state_s *php_ctlr = slot->ctrl->hpc_ctlr_handle;
+ struct controller *ctrl = slot->ctrl;
enum pcie_link_width lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
int retval = 0;
u16 lnk_status;
DBG_ENTER_ROUTINE
- if (!php_ctlr) {
- err("%s: Invalid HPC controller handle!\n", __FUNCTION__);
- return -1;
- }
-
- if (slot->hp_slot >= php_ctlr->num_slots) {
- err("%s: Invalid HPC slot number!\n", __FUNCTION__);
- return -1;
- }
-
- retval = hp_register_read_word(php_ctlr->pci_dev, LNK_STATUS(slot->ctrl->cap_base), lnk_status);
-
+ retval = pciehp_readw(ctrl, LNKSTATUS, &lnk_status);
if (retval) {
- err("%s : hp_register_read_word LNK_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read LNKSTATUS register\n", __FUNCTION__);
return retval;
}
.get_attention_status = hpc_get_attention_status,
.get_latch_status = hpc_get_latch_status,
.get_adapter_status = hpc_get_adapter_status,
+ .get_emi_status = hpc_get_emi_status,
+ .toggle_emi = hpc_toggle_emi,
.get_max_bus_speed = hpc_get_max_lnk_speed,
.get_cur_bus_speed = hpc_get_cur_lnk_speed,
int pcie_init(struct controller * ctrl, struct pcie_device *dev)
{
- struct php_ctlr_state_s *php_ctlr, *p;
- void *instance_id = ctrl;
int rc;
static int first = 1;
u16 temp_word;
u16 cap_reg;
u16 intr_enable = 0;
u32 slot_cap;
- int cap_base, saved_cap_base;
+ int cap_base;
u16 slot_status, slot_ctrl;
struct pci_dev *pdev;
DBG_ENTER_ROUTINE
- spin_lock_init(&list_lock);
- php_ctlr = kmalloc(sizeof(struct php_ctlr_state_s), GFP_KERNEL);
-
- if (!php_ctlr) { /* allocate controller state data */
- err("%s: HPC controller memory allocation error!\n", __FUNCTION__);
- goto abort;
- }
-
- memset(php_ctlr, 0, sizeof(struct php_ctlr_state_s));
-
pdev = dev->port;
- php_ctlr->pci_dev = pdev; /* save pci_dev in context */
+ ctrl->pci_dev = pdev; /* save pci_dev in context */
dbg("%s: hotplug controller vendor id 0x%x device id 0x%x\n",
__FUNCTION__, pdev->vendor, pdev->device);
- saved_cap_base = pcie_cap_base;
-
if ((cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP)) == 0) {
dbg("%s: Can't find PCI_CAP_ID_EXP (0x10)\n", __FUNCTION__);
goto abort_free_ctlr;
ctrl->cap_base = cap_base;
- dbg("%s: pcie_cap_base %x\n", __FUNCTION__, pcie_cap_base);
+ dbg("%s: pcie_cap_base %x\n", __FUNCTION__, cap_base);
- rc = hp_register_read_word(pdev, CAP_REG(ctrl->cap_base), cap_reg);
+ rc = pciehp_readw(ctrl, CAPREG, &cap_reg);
if (rc) {
- err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
+ err("%s: Cannot read CAPREG register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: CAP_REG offset %x cap_reg %x\n", __FUNCTION__, CAP_REG(ctrl->cap_base), cap_reg);
+ dbg("%s: CAPREG offset %x cap_reg %x\n",
+ __FUNCTION__, ctrl->cap_base + CAPREG, cap_reg);
if (((cap_reg & SLOT_IMPL) == 0) || (((cap_reg & DEV_PORT_TYPE) != 0x0040)
&& ((cap_reg & DEV_PORT_TYPE) != 0x0060))) {
goto abort_free_ctlr;
}
- rc = hp_register_read_dword(php_ctlr->pci_dev, SLOT_CAP(ctrl->cap_base), slot_cap);
+ rc = pciehp_readl(ctrl, SLOTCAP, &slot_cap);
if (rc) {
- err("%s : hp_register_read_word CAP_REG failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCAP register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CAP offset %x slot_cap %x\n", __FUNCTION__, SLOT_CAP(ctrl->cap_base), slot_cap);
+ dbg("%s: SLOTCAP offset %x slot_cap %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCAP, slot_cap);
if (!(slot_cap & HP_CAP)) {
dbg("%s : This slot is not hot-plug capable\n", __FUNCTION__);
goto abort_free_ctlr;
}
/* For debugging purpose */
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_STATUS offset %x slot_status %x\n", __FUNCTION__, SLOT_STATUS(ctrl->cap_base), slot_status);
+ dbg("%s: SLOTSTATUS offset %x slot_status %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTSTATUS, slot_status);
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CTRL offset %x slot_ctrl %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), slot_ctrl);
+ dbg("%s: SLOTCTRL offset %x slot_ctrl %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, slot_ctrl);
if (first) {
spin_lock_init(&hpc_event_lock);
/* setup wait queue */
init_waitqueue_head(&ctrl->queue);
- /* find the IRQ */
- php_ctlr->irq = dev->irq;
-
- /* Save interrupt callback info */
- php_ctlr->attention_button_callback = pciehp_handle_attention_button;
- php_ctlr->switch_change_callback = pciehp_handle_switch_change;
- php_ctlr->presence_change_callback = pciehp_handle_presence_change;
- php_ctlr->power_fault_callback = pciehp_handle_power_fault;
- php_ctlr->callback_instance_id = instance_id;
-
/* return PCI Controller Info */
- php_ctlr->slot_device_offset = 0;
- php_ctlr->num_slots = 1;
+ ctrl->slot_device_offset = 0;
+ ctrl->num_slots = 1;
+ ctrl->first_slot = slot_cap >> 19;
+ ctrl->ctrlcap = slot_cap & 0x0000007f;
/* Mask Hot-plug Interrupt Enable */
- rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- dbg("%s: SLOT_CTRL %x value read %x\n", __FUNCTION__, SLOT_CTRL(ctrl->cap_base), temp_word);
+ dbg("%s: SLOTCTRL %x value read %x\n",
+ __FUNCTION__, ctrl->cap_base + SLOTCTRL, temp_word);
temp_word = (temp_word & ~HP_INTR_ENABLE & ~CMD_CMPL_INTR_ENABLE) | 0x00;
- rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
goto abort_free_ctlr;
}
temp_word = 0x1F; /* Clear all events */
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
goto abort_free_ctlr;
}
- if (pciehp_poll_mode) {/* Install interrupt polling code */
- /* Install and start the interrupt polling timer */
- init_timer(&php_ctlr->int_poll_timer);
- start_int_poll_timer( php_ctlr, 10 ); /* start with 10 second delay */
+ if (pciehp_poll_mode) {
+ /* Install interrupt polling timer. Start with 10 sec delay */
+ init_timer(&ctrl->poll_timer);
+ start_int_poll_timer(ctrl, 10);
} else {
/* Installs the interrupt handler */
- rc = request_irq(php_ctlr->irq, pcie_isr, IRQF_SHARED, MY_NAME, (void *) ctrl);
- dbg("%s: request_irq %d for hpc%d (returns %d)\n", __FUNCTION__, php_ctlr->irq, ctlr_seq_num, rc);
+ rc = request_irq(ctrl->pci_dev->irq, pcie_isr, IRQF_SHARED,
+ MY_NAME, (void *)ctrl);
+ dbg("%s: request_irq %d for hpc%d (returns %d)\n",
+ __FUNCTION__, ctrl->pci_dev->irq, ctlr_seq_num, rc);
if (rc) {
- err("Can't get irq %d for the hotplug controller\n", php_ctlr->irq);
+ err("Can't get irq %d for the hotplug controller\n",
+ ctrl->pci_dev->irq);
goto abort_free_ctlr;
}
}
-
dbg("pciehp ctrl b:d:f:irq=0x%x:%x:%x:%x\n", pdev->bus->number,
PCI_SLOT(pdev->devfn), PCI_FUNC(pdev->devfn), dev->irq);
- rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (rc) {
- err("%s : hp_register_read_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTCTRL register\n", __FUNCTION__);
goto abort_free_irq;
}
}
/* Unmask Hot-plug Interrupt Enable for the interrupt notification mechanism case */
- rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_CTRL failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTCTRL register\n", __FUNCTION__);
goto abort_free_irq;
}
- rc = hp_register_read_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), slot_status);
+ rc = pciehp_readw(ctrl, SLOTSTATUS, &slot_status);
if (rc) {
- err("%s : hp_register_read_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot read SLOTSTATUS register\n", __FUNCTION__);
goto abort_disable_intr;
}
temp_word = 0x1F; /* Clear all events */
- rc = hp_register_write_word(php_ctlr->pci_dev, SLOT_STATUS(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTSTATUS, temp_word);
if (rc) {
- err("%s : hp_register_write_word SLOT_STATUS failed\n", __FUNCTION__);
+ err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__);
goto abort_disable_intr;
}
goto abort_disable_intr;
}
- /* Add this HPC instance into the HPC list */
- spin_lock(&list_lock);
- if (php_ctlr_list_head == 0) {
- php_ctlr_list_head = php_ctlr;
- p = php_ctlr_list_head;
- p->pnext = NULL;
- } else {
- p = php_ctlr_list_head;
-
- while (p->pnext)
- p = p->pnext;
-
- p->pnext = php_ctlr;
- }
- spin_unlock(&list_lock);
-
ctlr_seq_num++;
- ctrl->hpc_ctlr_handle = php_ctlr;
ctrl->hpc_ops = &pciehp_hpc_ops;
DBG_LEAVE_ROUTINE
/* We end up here for the many possible ways to fail this API. */
abort_disable_intr:
- rc = hp_register_read_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_readw(ctrl, SLOTCTRL, &temp_word);
if (!rc) {
temp_word &= ~(intr_enable | HP_INTR_ENABLE);
- rc = hp_register_write_word(pdev, SLOT_CTRL(ctrl->cap_base), temp_word);
+ rc = pciehp_writew(ctrl, SLOTCTRL, temp_word);
}
if (rc)
err("%s : disabling interrupts failed\n", __FUNCTION__);
abort_free_irq:
if (pciehp_poll_mode)
- del_timer_sync(&php_ctlr->int_poll_timer);
+ del_timer_sync(&ctrl->poll_timer);
else
- free_irq(php_ctlr->irq, ctrl);
+ free_irq(ctrl->pci_dev->irq, ctrl);
abort_free_ctlr:
- pcie_cap_base = saved_cap_base;
- kfree(php_ctlr);
-abort:
DBG_LEAVE_ROUTINE
return -1;
}
#include <asm/sn/sn_feature_sets.h>
#include <asm/sn/sn_sal.h>
#include <asm/sn/types.h>
+#include <linux/acpi.h>
+#include <asm/sn/acpi.h>
#include "../pci.h"
MODULE_AUTHOR("SGI (prarit@sgi.com, dickie@sgi.com, habeck@sgi.com)");
MODULE_DESCRIPTION("SGI Altix Hot Plug PCI Controller Driver");
-#define PCIIO_ASIC_TYPE_TIOCA 4
+
+/* SAL call error codes. Keep in sync with prom header io/include/pcibr.h */
#define PCI_SLOT_ALREADY_UP 2 /* slot already up */
#define PCI_SLOT_ALREADY_DOWN 3 /* slot already down */
#define PCI_L1_ERR 7 /* L1 console command error */
#define PCI_EMPTY_33MHZ 15 /* empty 33 MHz bus */
+
+
+#define PCIIO_ASIC_TYPE_TIOCA 4
#define PCI_L1_QSIZE 128 /* our L1 message buffer size */
#define SN_MAX_HP_SLOTS 32 /* max hotplug slots */
-#define SGI_HOTPLUG_PROM_REV 0x0430 /* Min. required PROM version */
#define SN_SLOT_NAME_SIZE 33 /* size of name string */
/* internal list head */
}
static int sn_slot_enable(struct hotplug_slot *bss_hotplug_slot,
- int device_num)
+ int device_num, char **ssdt)
{
struct slot *slot = bss_hotplug_slot->private;
struct pcibus_info *pcibus_info;
* Power-on and initialize the slot in the SN
* PCI infrastructure.
*/
- rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp);
+ rc = sal_pcibr_slot_enable(pcibus_info, device_num, &resp, ssdt);
+
if (rc == PCI_SLOT_ALREADY_UP) {
dev_dbg(slot->pci_bus->self, "is already active\n");
int func, num_funcs;
int new_ppb = 0;
int rc;
+ char *ssdt = NULL;
void pcibios_fixup_device_resources(struct pci_dev *);
/* Serialize the Linux PCI infrastructure */
/*
* Power-on and initialize the slot in the SN
- * PCI infrastructure.
+ * PCI infrastructure. Also, retrieve the ACPI SSDT
+ * table for the slot (if ACPI capable PROM).
*/
- rc = sn_slot_enable(bss_hotplug_slot, slot->device_num);
+ rc = sn_slot_enable(bss_hotplug_slot, slot->device_num, &ssdt);
if (rc) {
mutex_unlock(&sn_hotplug_mutex);
return rc;
}
+ if (ssdt)
+ ssdt = __va(ssdt);
+ /* Add the new SSDT for the slot to the ACPI namespace */
+ if (SN_ACPI_BASE_SUPPORT() && ssdt) {
+ acpi_status ret;
+
+ ret = acpi_load_table((struct acpi_table_header *)ssdt);
+ if (ACPI_FAILURE(ret)) {
+ printk(KERN_ERR "%s: acpi_load_table failed (0x%x)\n",
+ __FUNCTION__, ret);
+ /* try to continue on */
+ }
+ }
+
num_funcs = pci_scan_slot(slot->pci_bus,
PCI_DEVFN(slot->device_num + 1, 0));
if (!num_funcs) {
* pdi_host_pcidev_info).
*/
pcibios_fixup_device_resources(dev);
- sn_pci_fixup_slot(dev);
+ if (SN_ACPI_BASE_SUPPORT())
+ sn_acpi_slot_fixup(dev);
+ else
+ sn_io_slot_fixup(dev);
if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) {
unsigned char sec_bus;
pci_read_config_byte(dev, PCI_SECONDARY_BUS,
}
}
+ /*
+ * Add the slot's devices to the ACPI infrastructure */
+ if (SN_ACPI_BASE_SUPPORT() && ssdt) {
+ unsigned long adr;
+ struct acpi_device *pdevice;
+ struct acpi_device *device;
+ acpi_handle phandle;
+ acpi_handle chandle = NULL;
+ acpi_handle rethandle;
+ acpi_status ret;
+
+ phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
+
+ if (acpi_bus_get_device(phandle, &pdevice)) {
+ dev_dbg(slot->pci_bus->self,
+ "no parent device, assuming NULL\n");
+ pdevice = NULL;
+ }
+
+ /*
+ * Walk the rootbus node's immediate children looking for
+ * the slot's device node(s). There can be more than
+ * one for multifunction devices.
+ */
+ for (;;) {
+ rethandle = NULL;
+ ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
+ phandle, chandle,
+ &rethandle);
+
+ if (ret == AE_NOT_FOUND || rethandle == NULL)
+ break;
+
+ chandle = rethandle;
+
+ ret = acpi_evaluate_integer(chandle, METHOD_NAME__ADR,
+ NULL, &adr);
+
+ if (ACPI_SUCCESS(ret) &&
+ (adr>>16) == (slot->device_num + 1)) {
+
+ ret = acpi_bus_add(&device, pdevice, chandle,
+ ACPI_BUS_TYPE_DEVICE);
+ if (ACPI_FAILURE(ret)) {
+ printk(KERN_ERR "%s: acpi_bus_add "
+ "failed (0x%x) for slot %d "
+ "func %d\n", __FUNCTION__,
+ ret, (int)(adr>>16),
+ (int)(adr&0xffff));
+ /* try to continue on */
+ } else {
+ acpi_bus_start(device);
+ }
+ }
+ }
+ }
+
/* Call the driver for the new device */
pci_bus_add_devices(slot->pci_bus);
/* Call the drivers for the new devices subordinate to PPB */
struct pci_dev *dev;
int func;
int rc;
+ acpi_owner_id ssdt_id = 0;
/* Acquire update access to the bus */
mutex_lock(&sn_hotplug_mutex);
if (rc)
goto leaving;
+ /* free the ACPI resources for the slot */
+ if (SN_ACPI_BASE_SUPPORT() &&
+ PCI_CONTROLLER(slot->pci_bus)->acpi_handle) {
+ unsigned long adr;
+ struct acpi_device *device;
+ acpi_handle phandle;
+ acpi_handle chandle = NULL;
+ acpi_handle rethandle;
+ acpi_status ret;
+
+ /* Get the rootbus node pointer */
+ phandle = PCI_CONTROLLER(slot->pci_bus)->acpi_handle;
+
+ /*
+ * Walk the rootbus node's immediate children looking for
+ * the slot's device node(s). There can be more than
+ * one for multifunction devices.
+ */
+ for (;;) {
+ rethandle = NULL;
+ ret = acpi_get_next_object(ACPI_TYPE_DEVICE,
+ phandle, chandle,
+ &rethandle);
+
+ if (ret == AE_NOT_FOUND || rethandle == NULL)
+ break;
+
+ chandle = rethandle;
+
+ ret = acpi_evaluate_integer(chandle,
+ METHOD_NAME__ADR,
+ NULL, &adr);
+ if (ACPI_SUCCESS(ret) &&
+ (adr>>16) == (slot->device_num + 1)) {
+ /* retain the owner id */
+ acpi_get_id(chandle, &ssdt_id);
+
+ ret = acpi_bus_get_device(chandle,
+ &device);
+ if (ACPI_SUCCESS(ret))
+ acpi_bus_trim(device, 1);
+ }
+ }
+
+ }
+
/* Free the SN resources assigned to the Linux device.*/
for (func = 0; func < 8; func++) {
dev = pci_get_slot(slot->pci_bus,
}
}
+ /* Remove the SSDT for the slot from the ACPI namespace */
+ if (SN_ACPI_BASE_SUPPORT() && ssdt_id) {
+ acpi_status ret;
+ ret = acpi_unload_table_id(ssdt_id);
+ if (ACPI_FAILURE(ret)) {
+ printk(KERN_ERR "%s: acpi_unload_table_id "
+ "failed (0x%x) for id %d\n",
+ __FUNCTION__, ret, ssdt_id);
+ /* try to continue on */
+ }
+ }
+
/* free the collected sysdata pointers */
sn_bus_free_sysdata();
};
/* Define AMD SHPC ID */
-#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
+#define PCI_DEVICE_ID_AMD_GOLAM_7450 0x7450
#define PCI_DEVICE_ID_AMD_POGO_7458 0x7458
/* AMD PCIX bridge registers */
};
static inline struct slot *get_slot(struct hotplug_slot *hotplug_slot)
-{
+{
return hotplug_slot->private;
}
{
int retval = 0;
-#ifdef CONFIG_HOTPLUG_PCI_SHPC_POLL_EVENT_MODE
- shpchp_poll_mode = 1;
-#endif
-
retval = pci_register_driver(&shpc_driver);
dbg("%s: pci_register_driver = %d\n", __FUNCTION__, retval);
info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
/* Attention Button Change */
dbg("shpchp: Attention button interrupt received.\n");
-
+
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
p_slot = shpchp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset);
- /*
+ /*
* Save the presence state
*/
p_slot->hpc_ops->get_adapter_status(p_slot, &(p_slot->presence_save));
return 1;
}
-/* The following routines constitute the bulk of the
+/* The following routines constitute the bulk of the
hotplug controller logic
*/
static int change_bus_speed(struct controller *ctrl, struct slot *p_slot,
enum pci_bus_speed speed)
-{
+{
int rc = 0;
dbg("%s: change to speed %d\n", __FUNCTION__, speed);
static int fix_bus_speed(struct controller *ctrl, struct slot *pslot,
u8 flag, enum pci_bus_speed asp, enum pci_bus_speed bsp,
enum pci_bus_speed msp)
-{
+{
int rc = 0;
/*
err("%s: Failed to power on slot\n", __FUNCTION__);
return -1;
}
-
+
if ((ctrl->pci_dev->vendor == 0x8086) && (ctrl->pci_dev->device == 0x0332)) {
if (slots_not_empty)
return WRONG_BUS_FREQUENCY;
-
+
if ((rc = p_slot->hpc_ops->set_bus_speed_mode(p_slot, PCI_SPEED_33MHz))) {
err("%s: Issue of set bus speed mode command failed\n", __FUNCTION__);
return WRONG_BUS_FREQUENCY;
}
-
+
/* turn on board, blink green LED, turn off Amber LED */
if ((rc = p_slot->hpc_ops->slot_enable(p_slot))) {
err("%s: Issue of Slot Enable command failed\n", __FUNCTION__);
return rc;
}
}
-
+
rc = p_slot->hpc_ops->get_adapter_speed(p_slot, &asp);
if (rc) {
err("%s: Can't get adapter speed or bus mode mismatch\n",
err("%s: Issue of Slot Disable command failed\n", __FUNCTION__);
return rc;
}
-
+
rc = p_slot->hpc_ops->set_attention_status(p_slot, 0);
if (rc) {
err("%s: Issue of Set Attention command failed\n", __FUNCTION__);
#include "shpchp.h"
-#ifdef DEBUG
-#define DBG_K_TRACE_ENTRY ((unsigned int)0x00000001) /* On function entry */
-#define DBG_K_TRACE_EXIT ((unsigned int)0x00000002) /* On function exit */
-#define DBG_K_INFO ((unsigned int)0x00000004) /* Info messages */
-#define DBG_K_ERROR ((unsigned int)0x00000008) /* Error messages */
-#define DBG_K_TRACE (DBG_K_TRACE_ENTRY|DBG_K_TRACE_EXIT)
-#define DBG_K_STANDARD (DBG_K_INFO|DBG_K_ERROR|DBG_K_TRACE)
-/* Redefine this flagword to set debug level */
-#define DEBUG_LEVEL DBG_K_STANDARD
-
-#define DEFINE_DBG_BUFFER char __dbg_str_buf[256];
-
-#define DBG_PRINT( dbg_flags, args... ) \
- do { \
- if ( DEBUG_LEVEL & ( dbg_flags ) ) \
- { \
- int len; \
- len = sprintf( __dbg_str_buf, "%s:%d: %s: ", \
- __FILE__, __LINE__, __FUNCTION__ ); \
- sprintf( __dbg_str_buf + len, args ); \
- printk( KERN_NOTICE "%s\n", __dbg_str_buf ); \
- } \
- } while (0)
-
-#define DBG_ENTER_ROUTINE DBG_PRINT (DBG_K_TRACE_ENTRY, "%s", "[Entry]");
-#define DBG_LEAVE_ROUTINE DBG_PRINT (DBG_K_TRACE_EXIT, "%s", "[Exit]");
-#else
-#define DEFINE_DBG_BUFFER
-#define DBG_ENTER_ROUTINE
-#define DBG_LEAVE_ROUTINE
-#endif /* DEBUG */
-
/* Slot Available Register I field definition */
#define SLOT_33MHZ 0x0000001f
#define SLOT_66MHZ_PCIX 0x00001f00
#define SLOT_EVENT_LATCH 0x2
#define SLOT_SERR_INT_MASK 0x3
-DEFINE_DBG_BUFFER /* Debug string buffer for entire HPC defined here */
static atomic_t shpchp_num_controllers = ATOMIC_INIT(0);
static irqreturn_t shpc_isr(int irq, void *dev_id);
{
struct controller *ctrl = (struct controller *)data;
- DBG_ENTER_ROUTINE
-
/* Poll for interrupt events. regs == NULL => polling */
shpc_isr(0, ctrl);
shpchp_poll_time = 2; /* default polling interval is 2 sec */
start_int_poll_timer(ctrl, shpchp_poll_time);
-
- DBG_LEAVE_ROUTINE
}
/*
int retval = 0;
u16 temp_word;
- DBG_ENTER_ROUTINE
-
mutex_lock(&slot->ctrl->cmd_lock);
if (!shpc_poll_ctrl_busy(ctrl)) {
++t_slot;
temp_word = (t_slot << 8) | (cmd & 0xFF);
dbg("%s: t_slot %x cmd %x\n", __FUNCTION__, t_slot, cmd);
-
+
/* To make sure the Controller Busy bit is 0 before we send out the
- * command.
+ * command.
*/
shpc_writew(ctrl, CMD, temp_word);
}
out:
mutex_unlock(&slot->ctrl->cmd_lock);
-
- DBG_LEAVE_ROUTINE
return retval;
}
static int hpc_check_cmd_status(struct controller *ctrl)
{
- u16 cmd_status;
int retval = 0;
+ u16 cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
- DBG_ENTER_ROUTINE
-
- cmd_status = shpc_readw(ctrl, CMD_STATUS) & 0x000F;
-
switch (cmd_status >> 1) {
case 0:
retval = 0;
retval = cmd_status;
}
- DBG_LEAVE_ROUTINE
return retval;
}
static int hpc_get_attention_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
- u32 slot_reg;
- u8 state;
-
- DBG_ENTER_ROUTINE
-
- slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
- state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+ u8 state = (slot_reg & ATN_LED_STATE_MASK) >> ATN_LED_STATE_SHIFT;
switch (state) {
case ATN_LED_STATE_ON:
break;
}
- DBG_LEAVE_ROUTINE
return 0;
}
static int hpc_get_power_status(struct slot * slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
- u32 slot_reg;
- u8 state;
-
- DBG_ENTER_ROUTINE
-
- slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
- state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+ u8 state = (slot_reg & SLOT_STATE_MASK) >> SLOT_STATE_SHIFT;
switch (state) {
case SLOT_STATE_PWRONLY:
break;
}
- DBG_LEAVE_ROUTINE
return 0;
}
static int hpc_get_latch_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
- u32 slot_reg;
-
- DBG_ENTER_ROUTINE
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
- slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
*status = !!(slot_reg & MRL_SENSOR); /* 0 -> close; 1 -> open */
- DBG_LEAVE_ROUTINE
return 0;
}
static int hpc_get_adapter_status(struct slot *slot, u8 *status)
{
struct controller *ctrl = slot->ctrl;
- u32 slot_reg;
- u8 state;
-
- DBG_ENTER_ROUTINE
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+ u8 state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
- slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
- state = (slot_reg & PRSNT_MASK) >> PRSNT_SHIFT;
*status = (state != 0x3) ? 1 : 0;
- DBG_LEAVE_ROUTINE
return 0;
}
{
struct controller *ctrl = slot->ctrl;
- DBG_ENTER_ROUTINE
-
*prog_int = shpc_readb(ctrl, PROG_INTERFACE);
- DBG_LEAVE_ROUTINE
return 0;
}
u8 m66_cap = !!(slot_reg & MHZ66_CAP);
u8 pi, pcix_cap;
- DBG_ENTER_ROUTINE
-
if ((retval = hpc_get_prog_int(slot, &pi)))
return retval;
}
dbg("Adapter speed = %d\n", *value);
- DBG_LEAVE_ROUTINE
return retval;
}
static int hpc_get_mode1_ECC_cap(struct slot *slot, u8 *mode)
{
- struct controller *ctrl = slot->ctrl;
- u16 sec_bus_status;
- u8 pi;
int retval = 0;
-
- DBG_ENTER_ROUTINE
-
- pi = shpc_readb(ctrl, PROG_INTERFACE);
- sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
+ struct controller *ctrl = slot->ctrl;
+ u16 sec_bus_status = shpc_readw(ctrl, SEC_BUS_CONFIG);
+ u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
if (pi == 2) {
*mode = (sec_bus_status & 0x0100) >> 8;
}
dbg("Mode 1 ECC cap = %d\n", *mode);
-
- DBG_LEAVE_ROUTINE
return retval;
}
static int hpc_query_power_fault(struct slot * slot)
{
struct controller *ctrl = slot->ctrl;
- u32 slot_reg;
-
- DBG_ENTER_ROUTINE
-
- slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
+ u32 slot_reg = shpc_readl(ctrl, SLOT_REG(slot->hp_slot));
- DBG_LEAVE_ROUTINE
/* Note: Logic 0 => fault */
return !(slot_reg & POWER_FAULT);
}
u8 slot_cmd = 0;
switch (value) {
- case 0 :
+ case 0 :
slot_cmd = SET_ATTN_OFF; /* OFF */
break;
case 1:
int i;
u32 slot_reg, serr_int;
- DBG_ENTER_ROUTINE
-
/*
* Mask event interrupts and SERRs of all slots
*/
*/
if (atomic_dec_and_test(&shpchp_num_controllers))
destroy_workqueue(shpchp_wq);
-
- DBG_LEAVE_ROUTINE
}
static int hpc_power_on_slot(struct slot * slot)
{
int retval;
- DBG_ENTER_ROUTINE
-
retval = shpc_write_cmd(slot, slot->hp_slot, SET_SLOT_PWR);
- if (retval) {
+ if (retval)
err("%s: Write command failed!\n", __FUNCTION__);
- return retval;
- }
-
- DBG_LEAVE_ROUTINE
- return 0;
+ return retval;
}
static int hpc_slot_enable(struct slot * slot)
{
int retval;
- DBG_ENTER_ROUTINE
-
/* Slot - Enable, Power Indicator - Blink, Attention Indicator - Off */
retval = shpc_write_cmd(slot, slot->hp_slot,
SET_SLOT_ENABLE | SET_PWR_BLINK | SET_ATTN_OFF);
- if (retval) {
+ if (retval)
err("%s: Write command failed!\n", __FUNCTION__);
- return retval;
- }
- DBG_LEAVE_ROUTINE
- return 0;
+ return retval;
}
static int hpc_slot_disable(struct slot * slot)
{
int retval;
- DBG_ENTER_ROUTINE
-
/* Slot - Disable, Power Indicator - Off, Attention Indicator - On */
retval = shpc_write_cmd(slot, slot->hp_slot,
SET_SLOT_DISABLE | SET_PWR_OFF | SET_ATTN_ON);
- if (retval) {
+ if (retval)
err("%s: Write command failed!\n", __FUNCTION__);
- return retval;
- }
- DBG_LEAVE_ROUTINE
- return 0;
+ return retval;
}
static int hpc_set_bus_speed_mode(struct slot * slot, enum pci_bus_speed value)
struct controller *ctrl = slot->ctrl;
u8 pi, cmd;
- DBG_ENTER_ROUTINE
-
pi = shpc_readb(ctrl, PROG_INTERFACE);
if ((pi == 1) && (value > PCI_SPEED_133MHz_PCIX))
return -EINVAL;
if (retval)
err("%s: Write command failed!\n", __FUNCTION__);
- DBG_LEAVE_ROUTINE
return retval;
}
if (!intr_loc)
return IRQ_NONE;
- dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
+ dbg("%s: intr_loc = %x\n",__FUNCTION__, intr_loc);
if(!shpchp_poll_mode) {
/*
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
intr_loc2 = shpc_readl(ctrl, INTR_LOC);
- dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
+ dbg("%s: intr_loc2 = %x\n",__FUNCTION__, intr_loc2);
}
if (intr_loc & CMD_INTR_PENDING) {
- /*
- * Command Complete Interrupt Pending
+ /*
+ * Command Complete Interrupt Pending
* RO only - clear by writing 1 to the Command Completion
* Detect bit in Controller SERR-INT register
*/
if (!(intr_loc & ~CMD_INTR_PENDING))
goto out;
- for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
+ for (hp_slot = 0; hp_slot < ctrl->num_slots; hp_slot++) {
/* To find out which slot has interrupt pending */
if (!(intr_loc & SLOT_INTR_PENDING(hp_slot)))
continue;
serr_int &= ~(GLOBAL_INTR_MASK | SERR_INTR_RSVDZ_MASK);
shpc_writel(ctrl, SERR_INTR_ENABLE, serr_int);
}
-
+
return IRQ_HANDLED;
}
u32 slot_avail1 = shpc_readl(ctrl, SLOT_AVAIL1);
u32 slot_avail2 = shpc_readl(ctrl, SLOT_AVAIL2);
- DBG_ENTER_ROUTINE
-
if (pi == 2) {
if (slot_avail2 & SLOT_133MHZ_PCIX_533)
bus_speed = PCI_SPEED_133MHz_PCIX_533;
*value = bus_speed;
dbg("Max bus speed = %d\n", bus_speed);
- DBG_LEAVE_ROUTINE
+
return retval;
}
u8 pi = shpc_readb(ctrl, PROG_INTERFACE);
u8 speed_mode = (pi == 2) ? (sec_bus_reg & 0xF) : (sec_bus_reg & 0x7);
- DBG_ENTER_ROUTINE
-
if ((pi == 1) && (speed_mode > 4)) {
*value = PCI_SPEED_UNKNOWN;
return -ENODEV;
}
dbg("Current bus speed = %d\n", bus_speed);
- DBG_LEAVE_ROUTINE
return retval;
}
.power_on_slot = hpc_power_on_slot,
.slot_enable = hpc_slot_enable,
.slot_disable = hpc_slot_disable,
- .set_bus_speed_mode = hpc_set_bus_speed_mode,
+ .set_bus_speed_mode = hpc_set_bus_speed_mode,
.set_attention_status = hpc_set_attention_status,
.get_power_status = hpc_get_power_status,
.get_attention_status = hpc_get_attention_status,
.green_led_on = hpc_set_green_led_on,
.green_led_off = hpc_set_green_led_off,
.green_led_blink = hpc_set_green_led_blink,
-
+
.release_ctlr = hpc_release_ctlr,
};
u32 tempdword, slot_reg, slot_config;
u8 i;
- DBG_ENTER_ROUTINE
-
ctrl->pci_dev = pdev; /* pci_dev of the P2P bridge */
if ((pdev->vendor == PCI_VENDOR_ID_AMD) || (pdev->device ==
ctrl->mmio_size = 0x24 + 0x4 * num_slots;
}
- info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
+ info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, pdev->subsystem_vendor,
pdev->subsystem_device);
-
+
rc = pci_enable_device(pdev);
if (rc) {
err("%s: pci_enable_device failed\n", __FUNCTION__);
slot_reg &= ~SLOT_REG_RSVDZ_MASK;
shpc_writel(ctrl, SLOT_REG(hp_slot), slot_reg);
}
-
+
if (shpchp_poll_mode) {
/* Install interrupt polling timer. Start with 10 sec delay */
init_timer(&ctrl->poll_timer);
info("Can't get msi for the hotplug controller\n");
info("Use INTx for the hotplug controller\n");
}
-
+
rc = request_irq(ctrl->pci_dev->irq, shpc_isr, IRQF_SHARED,
MY_NAME, (void *)ctrl);
dbg("%s: request_irq %d for hpc%d (returns %d)\n",
dbg("%s: SERR_INTR_ENABLE = %x\n", __FUNCTION__, tempdword);
}
- DBG_LEAVE_ROUTINE
return 0;
/* We end up here for the many possible ways to fail this API. */
abort_iounmap:
iounmap(ctrl->creg);
abort:
- DBG_LEAVE_ROUTINE
return rc;
}
#include "pci.h"
#include "msi.h"
-static DEFINE_SPINLOCK(msi_lock);
-static struct msi_desc* msi_desc[NR_IRQS] = { [0 ... NR_IRQS-1] = NULL };
static struct kmem_cache* msi_cachep;
static int pci_msi_enable = 1;
{
struct msi_desc *entry;
- entry = msi_desc[irq];
+ entry = get_irq_msi(irq);
BUG_ON(!entry || !entry->dev);
switch (entry->msi_attrib.type) {
case PCI_CAP_ID_MSI:
if (entry->msi_attrib.maskbit) {
- int pos;
- u32 mask_bits;
+ int pos;
+ u32 mask_bits;
pos = (long)entry->mask_base;
pci_read_config_dword(entry->dev, pos, &mask_bits);
void read_msi_msg(unsigned int irq, struct msi_msg *msg)
{
- struct msi_desc *entry = get_irq_data(irq);
+ struct msi_desc *entry = get_irq_msi(irq);
switch(entry->msi_attrib.type) {
case PCI_CAP_ID_MSI:
{
void write_msi_msg(unsigned int irq, struct msi_msg *msg)
{
- struct msi_desc *entry = get_irq_data(irq);
+ struct msi_desc *entry = get_irq_msi(irq);
switch (entry->msi_attrib.type) {
case PCI_CAP_ID_MSI:
{
}
static int msi_free_irq(struct pci_dev* dev, int irq);
+
static int msi_init(void)
{
static int status = -ENOMEM;
if (!status)
return status;
- if (pci_msi_quirk) {
- pci_msi_enable = 0;
- printk(KERN_WARNING "PCI: MSI quirk detected. MSI disabled.\n");
- status = -EINVAL;
- return status;
- }
-
status = msi_cache_init();
if (status < 0) {
pci_msi_enable = 0;
return entry;
}
-static void attach_msi_entry(struct msi_desc *entry, int irq)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&msi_lock, flags);
- msi_desc[irq] = entry;
- spin_unlock_irqrestore(&msi_lock, flags);
-}
-
-static int create_msi_irq(void)
-{
- struct msi_desc *entry;
- int irq;
-
- entry = alloc_msi_entry();
- if (!entry)
- return -ENOMEM;
-
- irq = create_irq();
- if (irq < 0) {
- kmem_cache_free(msi_cachep, entry);
- return -EBUSY;
- }
-
- set_irq_data(irq, entry);
-
- return irq;
-}
-
-static void destroy_msi_irq(unsigned int irq)
-{
- struct msi_desc *entry;
-
- entry = get_irq_data(irq);
- set_irq_chip(irq, NULL);
- set_irq_data(irq, NULL);
- destroy_irq(irq);
- kmem_cache_free(msi_cachep, entry);
-}
-
static void enable_msi_mode(struct pci_dev *dev, int pos, int type)
{
u16 control;
pci_intx(dev, 1); /* enable intx */
}
-static int msi_lookup_irq(struct pci_dev *dev, int type)
-{
- int irq;
- unsigned long flags;
-
- spin_lock_irqsave(&msi_lock, flags);
- for (irq = 0; irq < NR_IRQS; irq++) {
- if (!msi_desc[irq] || msi_desc[irq]->dev != dev ||
- msi_desc[irq]->msi_attrib.type != type ||
- msi_desc[irq]->msi_attrib.default_irq != dev->irq)
- continue;
- spin_unlock_irqrestore(&msi_lock, flags);
- /* This pre-assigned MSI irq for this device
- already exits. Override dev->irq with this irq */
- dev->irq = irq;
- return 0;
- }
- spin_unlock_irqrestore(&msi_lock, flags);
-
- return -EACCES;
-}
-
-void pci_scan_msi_device(struct pci_dev *dev)
-{
- if (!dev)
- return;
-}
-
#ifdef CONFIG_PM
-int pci_save_msi_state(struct pci_dev *dev)
+static int __pci_save_msi_state(struct pci_dev *dev)
{
int pos, i = 0;
u16 control;
return 0;
}
-void pci_restore_msi_state(struct pci_dev *dev)
+static void __pci_restore_msi_state(struct pci_dev *dev)
{
int i = 0, pos;
u16 control;
kfree(save_state);
}
-int pci_save_msix_state(struct pci_dev *dev)
+static int __pci_save_msix_state(struct pci_dev *dev)
{
int pos;
- int temp;
int irq, head, tail = 0;
u16 control;
struct pci_cap_saved_state *save_state;
+ if (!dev->msix_enabled)
+ return 0;
+
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (pos <= 0 || dev->no_msi)
return 0;
*((u16 *)&save_state->data[0]) = control;
/* save the table */
- temp = dev->irq;
- if (msi_lookup_irq(dev, PCI_CAP_ID_MSIX)) {
- kfree(save_state);
- return -EINVAL;
- }
-
- irq = head = dev->irq;
+ irq = head = dev->first_msi_irq;
while (head != tail) {
struct msi_desc *entry;
- entry = msi_desc[irq];
+ entry = get_irq_msi(irq);
read_msi_msg(irq, &entry->msg_save);
- tail = msi_desc[irq]->link.tail;
+ tail = entry->link.tail;
irq = tail;
}
- dev->irq = temp;
save_state->cap_nr = PCI_CAP_ID_MSIX;
pci_add_saved_cap(dev, save_state);
return 0;
}
-void pci_restore_msix_state(struct pci_dev *dev)
+int pci_save_msi_state(struct pci_dev *dev)
+{
+ int rc;
+
+ rc = __pci_save_msi_state(dev);
+ if (rc)
+ return rc;
+
+ rc = __pci_save_msix_state(dev);
+
+ return rc;
+}
+
+static void __pci_restore_msix_state(struct pci_dev *dev)
{
u16 save;
int pos;
int irq, head, tail = 0;
struct msi_desc *entry;
- int temp;
struct pci_cap_saved_state *save_state;
+ if (!dev->msix_enabled)
+ return;
+
save_state = pci_find_saved_cap(dev, PCI_CAP_ID_MSIX);
if (!save_state)
return;
return;
/* route the table */
- temp = dev->irq;
- if (msi_lookup_irq(dev, PCI_CAP_ID_MSIX))
- return;
- irq = head = dev->irq;
+ irq = head = dev->first_msi_irq;
while (head != tail) {
- entry = msi_desc[irq];
+ entry = get_irq_msi(irq);
write_msi_msg(irq, &entry->msg_save);
- tail = msi_desc[irq]->link.tail;
+ tail = entry->link.tail;
irq = tail;
}
- dev->irq = temp;
pci_write_config_word(dev, msi_control_reg(pos), save);
enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
}
-#endif
+
+void pci_restore_msi_state(struct pci_dev *dev)
+{
+ __pci_restore_msi_state(dev);
+ __pci_restore_msix_state(dev);
+}
+#endif /* CONFIG_PM */
/**
* msi_capability_init - configure device's MSI capability structure
**/
static int msi_capability_init(struct pci_dev *dev)
{
- int status;
struct msi_desc *entry;
int pos, irq;
u16 control;
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
pci_read_config_word(dev, msi_control_reg(pos), &control);
/* MSI Entry Initialization */
- irq = create_msi_irq();
- if (irq < 0)
- return irq;
+ entry = alloc_msi_entry();
+ if (!entry)
+ return -ENOMEM;
- entry = get_irq_data(irq);
- entry->link.head = irq;
- entry->link.tail = irq;
entry->msi_attrib.type = PCI_CAP_ID_MSI;
entry->msi_attrib.is_64 = is_64bit_address(control);
entry->msi_attrib.entry_nr = 0;
maskbits);
}
/* Configure MSI capability structure */
- status = arch_setup_msi_irq(irq, dev);
- if (status < 0) {
- destroy_msi_irq(irq);
- return status;
+ irq = arch_setup_msi_irq(dev, entry);
+ if (irq < 0) {
+ kmem_cache_free(msi_cachep, entry);
+ return irq;
}
+ entry->link.head = irq;
+ entry->link.tail = irq;
+ dev->first_msi_irq = irq;
+ set_irq_msi(irq, entry);
- attach_msi_entry(entry, irq);
/* Set MSI enabled bits */
enable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
struct msix_entry *entries, int nvec)
{
struct msi_desc *head = NULL, *tail = NULL, *entry = NULL;
- int status;
int irq, pos, i, j, nr_entries, temp = 0;
unsigned long phys_addr;
u32 table_offset;
/* MSI-X Table Initialization */
for (i = 0; i < nvec; i++) {
- irq = create_msi_irq();
- if (irq < 0)
+ entry = alloc_msi_entry();
+ if (!entry)
break;
- entry = get_irq_data(irq);
j = entries[i].entry;
- entries[i].vector = irq;
entry->msi_attrib.type = PCI_CAP_ID_MSIX;
entry->msi_attrib.is_64 = 1;
entry->msi_attrib.entry_nr = j;
entry->msi_attrib.pos = pos;
entry->dev = dev;
entry->mask_base = base;
+
+ /* Configure MSI-X capability structure */
+ irq = arch_setup_msi_irq(dev, entry);
+ if (irq < 0) {
+ kmem_cache_free(msi_cachep, entry);
+ break;
+ }
+ entries[i].vector = irq;
if (!head) {
entry->link.head = irq;
entry->link.tail = irq;
}
temp = irq;
tail = entry;
- /* Configure MSI-X capability structure */
- status = arch_setup_msi_irq(irq, dev);
- if (status < 0) {
- destroy_msi_irq(irq);
- break;
- }
- attach_msi_entry(entry, irq);
+ set_irq_msi(irq, entry);
}
if (i != nvec) {
int avail = i - 1;
avail = -EBUSY;
return avail;
}
+ dev->first_msi_irq = entries[0].vector;
/* Set MSI-X enabled bits */
enable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
**/
int pci_enable_msi(struct pci_dev* dev)
{
- int pos, temp, status;
+ int pos, status;
if (pci_msi_supported(dev) < 0)
return -EINVAL;
- temp = dev->irq;
-
status = msi_init();
if (status < 0)
return status;
if (!pos)
return -EINVAL;
- WARN_ON(!msi_lookup_irq(dev, PCI_CAP_ID_MSI));
+ WARN_ON(!!dev->msi_enabled);
/* Check whether driver already requested for MSI-X irqs */
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
- if (pos > 0 && !msi_lookup_irq(dev, PCI_CAP_ID_MSIX)) {
+ if (pos > 0 && dev->msix_enabled) {
printk(KERN_INFO "PCI: %s: Can't enable MSI. "
- "Device already has MSI-X irq assigned\n",
+ "Device already has MSI-X enabled\n",
pci_name(dev));
- dev->irq = temp;
return -EINVAL;
}
status = msi_capability_init(dev);
struct msi_desc *entry;
int pos, default_irq;
u16 control;
- unsigned long flags;
if (!pci_msi_enable)
return;
if (!dev)
return;
+ if (!dev->msi_enabled)
+ return;
+
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
if (!pos)
return;
if (!(control & PCI_MSI_FLAGS_ENABLE))
return;
+
disable_msi_mode(dev, pos, PCI_CAP_ID_MSI);
- spin_lock_irqsave(&msi_lock, flags);
- entry = msi_desc[dev->irq];
+ entry = get_irq_msi(dev->first_msi_irq);
if (!entry || !entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) {
- spin_unlock_irqrestore(&msi_lock, flags);
return;
}
- if (irq_has_action(dev->irq)) {
- spin_unlock_irqrestore(&msi_lock, flags);
+ if (irq_has_action(dev->first_msi_irq)) {
printk(KERN_WARNING "PCI: %s: pci_disable_msi() called without "
"free_irq() on MSI irq %d\n",
- pci_name(dev), dev->irq);
- BUG_ON(irq_has_action(dev->irq));
+ pci_name(dev), dev->first_msi_irq);
+ BUG_ON(irq_has_action(dev->first_msi_irq));
} else {
default_irq = entry->msi_attrib.default_irq;
- spin_unlock_irqrestore(&msi_lock, flags);
- msi_free_irq(dev, dev->irq);
+ msi_free_irq(dev, dev->first_msi_irq);
/* Restore dev->irq to its default pin-assertion irq */
dev->irq = default_irq;
}
+ dev->first_msi_irq = 0;
}
static int msi_free_irq(struct pci_dev* dev, int irq)
struct msi_desc *entry;
int head, entry_nr, type;
void __iomem *base;
- unsigned long flags;
- arch_teardown_msi_irq(irq);
-
- spin_lock_irqsave(&msi_lock, flags);
- entry = msi_desc[irq];
+ entry = get_irq_msi(irq);
if (!entry || entry->dev != dev) {
- spin_unlock_irqrestore(&msi_lock, flags);
return -EINVAL;
}
type = entry->msi_attrib.type;
entry_nr = entry->msi_attrib.entry_nr;
head = entry->link.head;
base = entry->mask_base;
- msi_desc[entry->link.head]->link.tail = entry->link.tail;
- msi_desc[entry->link.tail]->link.head = entry->link.head;
- entry->dev = NULL;
- msi_desc[irq] = NULL;
- spin_unlock_irqrestore(&msi_lock, flags);
+ get_irq_msi(entry->link.head)->link.tail = entry->link.tail;
+ get_irq_msi(entry->link.tail)->link.head = entry->link.head;
- destroy_msi_irq(irq);
+ arch_teardown_msi_irq(irq);
+ kmem_cache_free(msi_cachep, entry);
if (type == PCI_CAP_ID_MSIX) {
writel(1, base + entry_nr * PCI_MSIX_ENTRY_SIZE +
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
{
int status, pos, nr_entries;
- int i, j, temp;
+ int i, j;
u16 control;
if (!entries || pci_msi_supported(dev) < 0)
return -EINVAL; /* duplicate entry */
}
}
- temp = dev->irq;
- WARN_ON(!msi_lookup_irq(dev, PCI_CAP_ID_MSIX));
+ WARN_ON(!!dev->msix_enabled);
/* Check whether driver already requested for MSI irq */
if (pci_find_capability(dev, PCI_CAP_ID_MSI) > 0 &&
- !msi_lookup_irq(dev, PCI_CAP_ID_MSI)) {
+ dev->msi_enabled) {
printk(KERN_INFO "PCI: %s: Can't enable MSI-X. "
"Device already has an MSI irq assigned\n",
pci_name(dev));
- dev->irq = temp;
return -EINVAL;
}
status = msix_capability_init(dev, entries, nvec);
void pci_disable_msix(struct pci_dev* dev)
{
- int pos, temp;
+ int irq, head, tail = 0, warning = 0;
+ int pos;
u16 control;
if (!pci_msi_enable)
if (!dev)
return;
+ if (!dev->msix_enabled)
+ return;
+
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
if (!pos)
return;
disable_msi_mode(dev, pos, PCI_CAP_ID_MSIX);
- temp = dev->irq;
- if (!msi_lookup_irq(dev, PCI_CAP_ID_MSIX)) {
- int irq, head, tail = 0, warning = 0;
- unsigned long flags;
-
- irq = head = dev->irq;
- dev->irq = temp; /* Restore pin IRQ */
- while (head != tail) {
- spin_lock_irqsave(&msi_lock, flags);
- tail = msi_desc[irq]->link.tail;
- spin_unlock_irqrestore(&msi_lock, flags);
- if (irq_has_action(irq))
- warning = 1;
- else if (irq != head) /* Release MSI-X irq */
- msi_free_irq(dev, irq);
- irq = tail;
- }
- msi_free_irq(dev, irq);
- if (warning) {
- printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without "
- "free_irq() on all MSI-X irqs\n",
- pci_name(dev));
- BUG_ON(warning > 0);
- }
+ irq = head = dev->first_msi_irq;
+ while (head != tail) {
+ tail = get_irq_msi(irq)->link.tail;
+ if (irq_has_action(irq))
+ warning = 1;
+ else if (irq != head) /* Release MSI-X irq */
+ msi_free_irq(dev, irq);
+ irq = tail;
+ }
+ msi_free_irq(dev, irq);
+ if (warning) {
+ printk(KERN_WARNING "PCI: %s: pci_disable_msix() called without "
+ "free_irq() on all MSI-X irqs\n",
+ pci_name(dev));
+ BUG_ON(warning > 0);
}
+ dev->first_msi_irq = 0;
}
/**
**/
void msi_remove_pci_irq_vectors(struct pci_dev* dev)
{
- int pos, temp;
- unsigned long flags;
-
if (!pci_msi_enable || !dev)
return;
- temp = dev->irq; /* Save IOAPIC IRQ */
- pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
- if (pos > 0 && !msi_lookup_irq(dev, PCI_CAP_ID_MSI)) {
- if (irq_has_action(dev->irq)) {
+ if (dev->msi_enabled) {
+ if (irq_has_action(dev->first_msi_irq)) {
printk(KERN_WARNING "PCI: %s: msi_remove_pci_irq_vectors() "
"called without free_irq() on MSI irq %d\n",
- pci_name(dev), dev->irq);
- BUG_ON(irq_has_action(dev->irq));
+ pci_name(dev), dev->first_msi_irq);
+ BUG_ON(irq_has_action(dev->first_msi_irq));
} else /* Release MSI irq assigned to this device */
- msi_free_irq(dev, dev->irq);
- dev->irq = temp; /* Restore IOAPIC IRQ */
+ msi_free_irq(dev, dev->first_msi_irq);
}
- pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
- if (pos > 0 && !msi_lookup_irq(dev, PCI_CAP_ID_MSIX)) {
+ if (dev->msix_enabled) {
int irq, head, tail = 0, warning = 0;
void __iomem *base = NULL;
- irq = head = dev->irq;
+ irq = head = dev->first_msi_irq;
while (head != tail) {
- spin_lock_irqsave(&msi_lock, flags);
- tail = msi_desc[irq]->link.tail;
- base = msi_desc[irq]->mask_base;
- spin_unlock_irqrestore(&msi_lock, flags);
+ tail = get_irq_msi(irq)->link.tail;
+ base = get_irq_msi(irq)->mask_base;
if (irq_has_action(irq))
warning = 1;
else if (irq != head) /* Release MSI-X irq */
pci_name(dev));
BUG_ON(warning > 0);
}
- dev->irq = temp; /* Restore IOAPIC IRQ */
}
}
/* restore the PCI config space */
pci_restore_state(pci_dev);
/* if the device was enabled before suspend, reenable */
- if (atomic_read(&pci_dev->enable_cnt))
- retval = __pci_enable_device(pci_dev);
+ retval = __pci_reenable_device(pci_dev);
/* if the device was busmaster before the suspend, make it busmaster again */
if (pci_dev->is_busmaster)
pci_set_master(pci_dev);
* If no error occurred, the driver remains registered even if
* no device was claimed during registration.
*/
-int __pci_register_driver(struct pci_driver *drv, struct module *owner)
+int __pci_register_driver(struct pci_driver *drv, struct module *owner,
+ const char *mod_name)
{
int error;
drv->driver.name = drv->name;
drv->driver.bus = &pci_bus_type;
drv->driver.owner = owner;
+ drv->driver.mod_name = mod_name;
drv->driver.kobj.ktype = &pci_driver_kobj_type;
if (pci_multithread_probe)
if (state > PCI_D3hot)
state = PCI_D3hot;
+ /*
+ * If the device or the parent bridge can't support PCI PM, ignore
+ * the request if we're doing anything besides putting it into D0
+ * (which would only happen on boot).
+ */
+ if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
+ return 0;
+
/* Validate current state:
* Can enter D0 from any state, but if we can only go deeper
* to sleep if we're already in a low power state
} else if (dev->current_state == state)
return 0; /* we're already there */
- /*
- * If the device or the parent bridge can't support PCI PM, ignore
- * the request if we're doing anything besides putting it into D0
- * (which would only happen on boot).
- */
- if ((state == PCI_D1 || state == PCI_D2) && pci_no_d1d2(dev))
- return 0;
/* find PCI PM capability in list */
pm = pci_find_capability(dev, PCI_CAP_ID_PM);
pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]);
if ((i = pci_save_msi_state(dev)) != 0)
return i;
- if ((i = pci_save_msix_state(dev)) != 0)
- return i;
if ((i = pci_save_pcie_state(dev)) != 0)
return i;
if ((i = pci_save_pcix_state(dev)) != 0)
}
pci_restore_pcix_state(dev);
pci_restore_msi_state(dev);
- pci_restore_msix_state(dev);
+
return 0;
}
-/**
- * pci_enable_device_bars - Initialize some of a device for use
- * @dev: PCI device to be initialized
- * @bars: bitmask of BAR's that must be configured
- *
- * Initialize device before it's used by a driver. Ask low-level code
- * to enable selected I/O and memory resources. Wake up the device if it
- * was suspended. Beware, this function can fail.
- */
-
-int
-pci_enable_device_bars(struct pci_dev *dev, int bars)
+static int do_pci_enable_device(struct pci_dev *dev, int bars)
{
int err;
err = pcibios_enable_device(dev, bars);
if (err < 0)
return err;
+ pci_fixup_device(pci_fixup_enable, dev);
+
return 0;
}
/**
- * __pci_enable_device - Initialize device before it's used by a driver.
+ * __pci_reenable_device - Resume abandoned device
+ * @dev: PCI device to be resumed
+ *
+ * Note this function is a backend of pci_default_resume and is not supposed
+ * to be called by normal code, write proper resume handler and use it instead.
+ */
+int
+__pci_reenable_device(struct pci_dev *dev)
+{
+ if (atomic_read(&dev->enable_cnt))
+ return do_pci_enable_device(dev, (1 << PCI_NUM_RESOURCES) - 1);
+ return 0;
+}
+
+/**
+ * pci_enable_device_bars - Initialize some of a device for use
* @dev: PCI device to be initialized
+ * @bars: bitmask of BAR's that must be configured
*
* Initialize device before it's used by a driver. Ask low-level code
- * to enable I/O and memory. Wake up the device if it was suspended.
- * Beware, this function can fail.
- *
- * Note this function is a backend and is not supposed to be called by
- * normal code, use pci_enable_device() instead.
+ * to enable selected I/O and memory resources. Wake up the device if it
+ * was suspended. Beware, this function can fail.
*/
int
-__pci_enable_device(struct pci_dev *dev)
+pci_enable_device_bars(struct pci_dev *dev, int bars)
{
int err;
- err = pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
- if (err)
- return err;
- pci_fixup_device(pci_fixup_enable, dev);
- return 0;
+ if (atomic_add_return(1, &dev->enable_cnt) > 1)
+ return 0; /* already enabled */
+
+ err = do_pci_enable_device(dev, bars);
+ if (err < 0)
+ atomic_dec(&dev->enable_cnt);
+ return err;
}
/**
*/
int pci_enable_device(struct pci_dev *dev)
{
- int result;
- if (atomic_add_return(1, &dev->enable_cnt) > 1)
- return 0; /* already enabled */
- result = __pci_enable_device(dev);
- if (result < 0)
- atomic_dec(&dev->enable_cnt);
- return result;
+ return pci_enable_device_bars(dev, (1 << PCI_NUM_RESOURCES) - 1);
}
/**
return -EBUSY;
}
+/**
+ * pci_release_selected_regions - Release selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources were previously reserved
+ * @bars: Bitmask of BARs to be released
+ *
+ * Release selected PCI I/O and memory resources previously reserved.
+ * Call this function only after all use of the PCI regions has ceased.
+ */
+void pci_release_selected_regions(struct pci_dev *pdev, int bars)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+}
+
+/**
+ * pci_request_selected_regions - Reserve selected PCI I/O and memory resources
+ * @pdev: PCI device whose resources are to be reserved
+ * @bars: Bitmask of BARs to be requested
+ * @res_name: Name to be associated with resource
+ */
+int pci_request_selected_regions(struct pci_dev *pdev, int bars,
+ const char *res_name)
+{
+ int i;
+
+ for (i = 0; i < 6; i++)
+ if (bars & (1 << i))
+ if(pci_request_region(pdev, i, res_name))
+ goto err_out;
+ return 0;
+
+err_out:
+ while(--i >= 0)
+ if (bars & (1 << i))
+ pci_release_region(pdev, i);
+
+ return -EBUSY;
+}
/**
* pci_release_regions - Release reserved PCI I/O and memory resources
void pci_release_regions(struct pci_dev *pdev)
{
- int i;
-
- for (i = 0; i < 6; i++)
- pci_release_region(pdev, i);
+ pci_release_selected_regions(pdev, (1 << 6) - 1);
}
/**
*/
int pci_request_regions(struct pci_dev *pdev, const char *res_name)
{
- int i;
-
- for (i = 0; i < 6; i++)
- if(pci_request_region(pdev, i, res_name))
- goto err_out;
- return 0;
-
-err_out:
- while(--i >= 0)
- pci_release_region(pdev, i);
-
- return -EBUSY;
+ return pci_request_selected_regions(pdev, ((1 << 6) - 1), res_name);
}
/**
return 0;
}
#endif
-
+
+/**
+ * pci_select_bars - Make BAR mask from the type of resource
+ * @pdev: the PCI device for which BAR mask is made
+ * @flags: resource type mask to be selected
+ *
+ * This helper routine makes bar mask from the type of resource.
+ */
+int pci_select_bars(struct pci_dev *dev, unsigned long flags)
+{
+ int i, bars = 0;
+ for (i = 0; i < PCI_NUM_RESOURCES; i++)
+ if (pci_resource_flags(dev, i) & flags)
+ bars |= (1 << i);
+ return bars;
+}
+
static int __devinit pci_init(void)
{
struct pci_dev *dev = NULL;
device_initcall(pci_init);
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-/* FIXME: Some boxes have multiple ISA bridges! */
-struct pci_dev *isa_bridge;
-EXPORT_SYMBOL(isa_bridge);
-#endif
-
EXPORT_SYMBOL_GPL(pci_restore_bars);
EXPORT_SYMBOL(pci_enable_device_bars);
EXPORT_SYMBOL(pci_enable_device);
EXPORT_SYMBOL(pci_request_regions);
EXPORT_SYMBOL(pci_release_region);
EXPORT_SYMBOL(pci_request_region);
+EXPORT_SYMBOL(pci_release_selected_regions);
+EXPORT_SYMBOL(pci_request_selected_regions);
EXPORT_SYMBOL(pci_set_master);
EXPORT_SYMBOL(pci_set_mwi);
EXPORT_SYMBOL(pci_clear_mwi);
EXPORT_SYMBOL(pci_set_consistent_dma_mask);
EXPORT_SYMBOL(pci_assign_resource);
EXPORT_SYMBOL(pci_find_parent_resource);
+EXPORT_SYMBOL(pci_select_bars);
EXPORT_SYMBOL(pci_set_power_state);
EXPORT_SYMBOL(pci_save_state);
EXPORT_SYMBOL(pci_restore_state);
EXPORT_SYMBOL(pci_enable_wake);
-/* Quirk info */
-
-EXPORT_SYMBOL(isa_dma_bridge_buggy);
-EXPORT_SYMBOL(pci_pci_problems);
/* Functions internal to the PCI core code */
-extern int __must_check __pci_enable_device(struct pci_dev *);
+extern int __must_check __pci_reenable_device(struct pci_dev *);
extern int pci_uevent(struct device *dev, char **envp, int num_envp,
char *buffer, int buffer_size);
extern int pci_create_sysfs_dev_files(struct pci_dev *pdev);
/* Lock for read/write access to pci device and bus lists */
extern struct rw_semaphore pci_bus_sem;
-#ifdef CONFIG_PCI_MSI
-extern int pci_msi_quirk;
-#else
-#define pci_msi_quirk 0
-#endif
extern unsigned int pci_pm_d3_delay;
+
#ifdef CONFIG_PCI_MSI
void disable_msi_mode(struct pci_dev *dev, int pos, int type);
void pci_no_msi(void);
static inline void disable_msi_mode(struct pci_dev *dev, int pos, int type) { }
static inline void pci_no_msi(void) { }
#endif
+
#if defined(CONFIG_PCI_MSI) && defined(CONFIG_PM)
int pci_save_msi_state(struct pci_dev *dev);
-int pci_save_msix_state(struct pci_dev *dev);
void pci_restore_msi_state(struct pci_dev *dev);
-void pci_restore_msix_state(struct pci_dev *dev);
#else
static inline int pci_save_msi_state(struct pci_dev *dev) { return 0; }
-static inline int pci_save_msix_state(struct pci_dev *dev) { return 0; }
static inline void pci_restore_msi_state(struct pci_dev *dev) {}
-static inline void pci_restore_msix_state(struct pci_dev *dev) {}
#endif
+
static inline int pci_no_d1d2(struct pci_dev *dev)
{
unsigned int parent_dstates = 0;
return size;
}
+static u64 pci_size64(u64 base, u64 maxbase, u64 mask)
+{
+ u64 size = mask & maxbase; /* Find the significant bits */
+ if (!size)
+ return 0;
+
+ /* Get the lowest of them to find the decode size, and
+ from that the extent. */
+ size = (size & ~(size-1)) - 1;
+
+ /* base == maxbase can be valid only if the BAR has
+ already been programmed with all 1s. */
+ if (base == maxbase && ((base | size) & mask) != mask)
+ return 0;
+
+ return size;
+}
+
+static inline int is_64bit_memory(u32 mask)
+{
+ if ((mask & (PCI_BASE_ADDRESS_SPACE|PCI_BASE_ADDRESS_MEM_TYPE_MASK)) ==
+ (PCI_BASE_ADDRESS_SPACE_MEMORY|PCI_BASE_ADDRESS_MEM_TYPE_64))
+ return 1;
+ return 0;
+}
+
static void pci_read_bases(struct pci_dev *dev, unsigned int howmany, int rom)
{
unsigned int pos, reg, next;
struct resource *res;
for(pos=0; pos<howmany; pos = next) {
+ u64 l64;
+ u64 sz64;
+ u32 raw_sz;
+
next = pos+1;
res = &dev->resource[pos];
res->name = pci_name(dev);
continue;
if (l == 0xffffffff)
l = 0;
- if ((l & PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_MEMORY) {
+ raw_sz = sz;
+ if ((l & PCI_BASE_ADDRESS_SPACE) ==
+ PCI_BASE_ADDRESS_SPACE_MEMORY) {
sz = pci_size(l, sz, (u32)PCI_BASE_ADDRESS_MEM_MASK);
- if (!sz)
+ /*
+ * For 64bit prefetchable memory sz could be 0, if the
+ * real size is bigger than 4G, so we need to check
+ * szhi for that.
+ */
+ if (!is_64bit_memory(l) && !sz)
continue;
res->start = l & PCI_BASE_ADDRESS_MEM_MASK;
res->flags |= l & ~PCI_BASE_ADDRESS_MEM_MASK;
}
res->end = res->start + (unsigned long) sz;
res->flags |= pci_calc_resource_flags(l);
- if ((l & (PCI_BASE_ADDRESS_SPACE | PCI_BASE_ADDRESS_MEM_TYPE_MASK))
- == (PCI_BASE_ADDRESS_SPACE_MEMORY | PCI_BASE_ADDRESS_MEM_TYPE_64)) {
+ if (is_64bit_memory(l)) {
u32 szhi, lhi;
+
pci_read_config_dword(dev, reg+4, &lhi);
pci_write_config_dword(dev, reg+4, ~0);
pci_read_config_dword(dev, reg+4, &szhi);
pci_write_config_dword(dev, reg+4, lhi);
- szhi = pci_size(lhi, szhi, 0xffffffff);
+ sz64 = ((u64)szhi << 32) | raw_sz;
+ l64 = ((u64)lhi << 32) | l;
+ sz64 = pci_size64(l64, sz64, PCI_BASE_ADDRESS_MEM_MASK);
next++;
#if BITS_PER_LONG == 64
- res->start |= ((unsigned long) lhi) << 32;
- res->end = res->start + sz;
- if (szhi) {
- /* This BAR needs > 4GB? Wow. */
- res->end |= (unsigned long)szhi<<32;
+ if (!sz64) {
+ res->start = 0;
+ res->end = 0;
+ res->flags = 0;
+ continue;
}
+ res->start = l64 & PCI_BASE_ADDRESS_MEM_MASK;
+ res->end = res->start + sz64;
#else
- if (szhi) {
- printk(KERN_ERR "PCI: Unable to handle 64-bit BAR for device %s\n", pci_name(dev));
+ if (sz64 > 0x100000000ULL) {
+ printk(KERN_ERR "PCI: Unable to handle 64-bit "
+ "BAR for device %s\n", pci_name(dev));
res->start = 0;
res->flags = 0;
} else if (lhi) {
/* 64-bit wide address, treat as disabled */
- pci_write_config_dword(dev, reg, l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
+ pci_write_config_dword(dev, reg,
+ l & ~(u32)PCI_BASE_ADDRESS_MEM_MASK);
pci_write_config_dword(dev, reg+4, 0);
res->start = 0;
res->end = sz;
return NULL;
pci_device_add(dev, bus);
- pci_scan_msi_device(dev);
return dev;
}
This appears to be BIOS not version dependent. So presumably there is a
chipset level fix */
-int isa_dma_bridge_buggy; /* Exported */
+int isa_dma_bridge_buggy;
+EXPORT_SYMBOL(isa_dma_bridge_buggy);
static void __devinit quirk_isa_dma_hangs(struct pci_dev *dev)
{
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NEC, PCI_DEVICE_ID_NEC_CBUS_3, quirk_isa_dma_hangs );
int pci_pci_problems;
+EXPORT_SYMBOL(pci_pci_problems);
/*
* Chipsets where PCI->PCI transfers vanish or hang
pci_pci_problems |= PCIPCI_FAIL;
}
}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci );
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci );
static void __devinit quirk_nopciamd(struct pci_dev *dev)
{
pci_pci_problems |= PCIAGP_FAIL;
}
}
-
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_5597, quirk_nopcipci );
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496, quirk_nopcipci );
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8151_0, quirk_nopciamd );
/*
case 0x1626: /* L3C notebook */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82845G_HB)
switch(dev->subsystem_device) {
case 0x80b1: /* P4GE-V */
case 0x80b2: /* P4PE */
case 0x8093: /* P4B533-V */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82850_HB)
switch(dev->subsystem_device) {
case 0x8030: /* P4T533 */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_7205_0)
switch (dev->subsystem_device) {
case 0x8070: /* P4G8X Deluxe */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_E7501_MCH)
switch (dev->subsystem_device) {
case 0x80c9: /* PU-DLS */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch (dev->subsystem_device) {
case 0x1751: /* M2N notebook */
case 0x1821: /* M5N notebook */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch (dev->subsystem_device) {
case 0x184b: /* W1N notebook */
case 0x186a: /* M6Ne notebook */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
switch (dev->subsystem_device) {
case 0x80f2: /* P4P800-X */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
switch (dev->subsystem_device) {
case 0x1882: /* M6V notebook */
case 0x1977: /* A6VA notebook */
asus_hides_smbus = 1;
}
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_HP)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
case 0x0890: /* HP Compaq nc6000 */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82865_HB)
switch (dev->subsystem_device) {
case 0x12bc: /* HP D330L */
case 0x12bd: /* HP D530 */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB) {
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82915GM_HB)
switch (dev->subsystem_device) {
case 0x099c: /* HP Compaq nx6110 */
asus_hides_smbus = 1;
}
- }
} else if (unlikely(dev->subsystem_vendor == PCI_VENDOR_ID_TOSHIBA)) {
if (dev->device == PCI_DEVICE_ID_INTEL_82855GM_HB)
switch(dev->subsystem_device) {
case 0x0001: /* Toshiba Satellite A40 */
asus_hides_smbus = 1;
}
- if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
+ else if (dev->device == PCI_DEVICE_ID_INTEL_82855PM_HB)
switch(dev->subsystem_device) {
case 0x0001: /* Toshiba Tecra M2 */
asus_hides_smbus = 1;
pci_write_config_byte(dev, 0x77, val & ~0x10);
}
}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
+DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
/*
* ... This is further complicated by the fact that some SiS96x south
*
* We can also enable the sis96x bit in the discovery register..
*/
-static int __devinitdata sis_96x_compatible = 0;
-
#define SIS_DETECT_REGISTER 0x40
static void quirk_sis_503(struct pci_dev *dev)
return;
}
- /* Make people aware that we changed the config.. */
- printk(KERN_WARNING "Uncovering SIS%x that hid as a SIS503 (compatible=%d)\n", devid, sis_96x_compatible);
-
/*
* Ok, it now shows up as a 96x.. run the 96x quirk by
* hand in case it has already been processed.
dev->device = devid;
quirk_sis_96x_smbus(dev);
}
-
-static void __init quirk_sis_96x_compatible(struct pci_dev *dev)
-{
- sis_96x_compatible = 1;
-}
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_645, quirk_sis_96x_compatible );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_646, quirk_sis_96x_compatible );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_648, quirk_sis_96x_compatible );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_650, quirk_sis_96x_compatible );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_651, quirk_sis_96x_compatible );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_735, quirk_sis_96x_compatible );
-
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_503, quirk_sis_503 );
+
+
/*
* On ASUS A8V and A8V Deluxe boards, the onboard AC97 audio controller
* and MC97 modem controller are disabled when a second PCI soundcard is
}
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
-
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
-
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8237, asus_hides_ac97_lpc );
-
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_961, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_962, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_963, quirk_sis_96x_smbus );
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_LPC, quirk_sis_96x_smbus );
-
#if defined(CONFIG_ATA) || defined(CONFIG_ATA_MODULE)
/*
break;
}
}
-
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, quirk_jmicron_dualfn);
int pcie_mch_quirk;
+EXPORT_SYMBOL(pcie_mch_quirk);
static void __devinit quirk_pcie_mch(struct pci_dev *pdev)
{
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260a, quirk_intel_pcie_pm);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x260b, quirk_intel_pcie_pm);
+/*
+ * Toshiba TC86C001 IDE controller reports the standard 8-byte BAR0 size
+ * but the PIO transfers won't work if BAR0 falls at the odd 8 bytes.
+ * Re-allocate the region if needed...
+ */
+static void __init quirk_tc86c001_ide(struct pci_dev *dev)
+{
+ struct resource *r = &dev->resource[0];
+
+ if (r->start & 0x8) {
+ r->start = 0;
+ r->end = 0xf;
+ }
+}
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_TOSHIBA_2,
+ PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE,
+ quirk_tc86c001_ide);
+
static void __devinit quirk_netmos(struct pci_dev *dev)
{
unsigned int num_parallel = (dev->subsystem_device & 0xf0) >> 4;
}
pci_do_fixups(dev, start, end);
}
+EXPORT_SYMBOL(pci_fixup_device);
/* Enable 1k I/O space granularity on the Intel P64H2 */
static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
}
DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io);
+/* Fix the IOBL_ADR for 1k I/O space granularity on the Intel P64H2
+ * The IOBL_ADR gets re-written to 4k boundaries in pci_setup_bridge()
+ * in drivers/pci/setup-bus.c
+ */
+static void __devinit quirk_p64h2_1k_io_fix_iobl(struct pci_dev *dev)
+{
+ u16 en1k, iobl_adr, iobl_adr_1k;
+ struct resource *res = dev->resource + PCI_BRIDGE_RESOURCES;
+
+ pci_read_config_word(dev, 0x40, &en1k);
+
+ if (en1k & 0x200) {
+ pci_read_config_word(dev, PCI_IO_BASE, &iobl_adr);
+
+ iobl_adr_1k = iobl_adr | (res->start >> 8) | (res->end & 0xfc00);
+
+ if (iobl_adr != iobl_adr_1k) {
+ printk(KERN_INFO "PCI: Fixing P64H2 IOBL_ADR from 0x%x to 0x%x for 1 KB Granularity\n",
+ iobl_adr,iobl_adr_1k);
+ pci_write_config_word(dev, PCI_IO_BASE, iobl_adr_1k);
+ }
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x1460, quirk_p64h2_1k_io_fix_iobl);
+
/* Under some circumstances, AER is not linked with extended capabilities.
* Force it to be linked by setting the corresponding control bit in the
* config space.
quirk_nvidia_ck804_pcie_aer_ext_cap);
#ifdef CONFIG_PCI_MSI
-/* To disable MSI globally */
-int pci_msi_quirk;
-
/* The Serverworks PCI-X chipset does not support MSI. We cannot easily rely
* on setting PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually
* some other busses controlled by the chipset even if Linux is not aware of it.
*/
static void __init quirk_svw_msi(struct pci_dev *dev)
{
- pci_msi_quirk = 1;
- printk(KERN_WARNING "PCI: MSI quirk detected. pci_msi_quirk set.\n");
+ pci_no_msi();
+ printk(KERN_WARNING "PCI: MSI quirk detected. MSI deactivated.\n");
}
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_svw_msi);
DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_CK804_PCIE,
quirk_nvidia_ck804_msi_ht_cap);
#endif /* CONFIG_PCI_MSI */
-
-EXPORT_SYMBOL(pcie_mch_quirk);
-#ifdef CONFIG_HOTPLUG
-EXPORT_SYMBOL(pci_fixup_device);
-#endif
return dev;
}
-/**
- * pci_find_device_reverse - begin or continue searching for a PCI device by vendor/device id
- * @vendor: PCI vendor id to match, or %PCI_ANY_ID to match all vendor ids
- * @device: PCI device id to match, or %PCI_ANY_ID to match all device ids
- * @from: Previous PCI device found in search, or %NULL for new search.
- *
- * Iterates through the list of known PCI devices in the reverse order of
- * pci_find_device().
- * If a PCI device is found with a matching @vendor and @device, a pointer to
- * its device structure is returned. Otherwise, %NULL is returned.
- * A new search is initiated by passing %NULL as the @from argument.
- * Otherwise if @from is not %NULL, searches continue from previous device
- * on the global list.
- */
-struct pci_dev *
-pci_find_device_reverse(unsigned int vendor, unsigned int device, const struct pci_dev *from)
-{
- struct list_head *n;
- struct pci_dev *dev;
-
- WARN_ON(in_interrupt());
- down_read(&pci_bus_sem);
- n = from ? from->global_list.prev : pci_devices.prev;
-
- while (n && (n != &pci_devices)) {
- dev = pci_dev_g(n);
- if ((vendor == PCI_ANY_ID || dev->vendor == vendor) &&
- (device == PCI_ANY_ID || dev->device == device))
- goto exit;
- n = n->prev;
- }
- dev = NULL;
-exit:
- up_read(&pci_bus_sem);
- return dev;
-}
-
/**
* pci_get_class - begin or continue searching for a PCI device by class
* @class: search for a PCI device with this class designation
EXPORT_SYMBOL(pci_find_present);
EXPORT_SYMBOL(pci_find_device);
-EXPORT_SYMBOL(pci_find_device_reverse);
EXPORT_SYMBOL(pci_find_slot);
/* For boot time work */
EXPORT_SYMBOL(pci_find_bus);
down_read(&pcmcia_socket_list_rwsem);
list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
- if (socket->dev.dev != dev)
+ if (socket->dev.parent != dev)
continue;
mutex_lock(&socket->skt_mutex);
socket_suspend(socket);
down_read(&pcmcia_socket_list_rwsem);
list_for_each_entry(socket, &pcmcia_socket_list, socket_list) {
- if (socket->dev.dev != dev)
+ if (socket->dev.parent != dev)
continue;
mutex_lock(&socket->skt_mutex);
socket_resume(socket);
struct pcmcia_socket * pcmcia_get_socket(struct pcmcia_socket *skt)
{
- struct class_device *cl_dev = class_device_get(&skt->dev);
- if (!cl_dev)
+ struct device *dev = get_device(&skt->dev);
+ if (!dev)
return NULL;
- skt = class_get_devdata(cl_dev);
+ skt = dev_get_drvdata(dev);
if (!try_module_get(skt->owner)) {
- class_device_put(&skt->dev);
+ put_device(&skt->dev);
return NULL;
}
return (skt);
void pcmcia_put_socket(struct pcmcia_socket *skt)
{
module_put(skt->owner);
- class_device_put(&skt->dev);
+ put_device(&skt->dev);
}
EXPORT_SYMBOL(pcmcia_put_socket);
-static void pcmcia_release_socket(struct class_device *class_dev)
+static void pcmcia_release_socket(struct device *dev)
{
- struct pcmcia_socket *socket = class_get_devdata(class_dev);
+ struct pcmcia_socket *socket = dev_get_drvdata(dev);
complete(&socket->socket_released);
}
struct task_struct *tsk;
int ret;
- if (!socket || !socket->ops || !socket->dev.dev || !socket->resource_ops)
+ if (!socket || !socket->ops || !socket->dev.parent || !socket->resource_ops)
return -EINVAL;
cs_dbg(socket, 0, "pcmcia_register_socket(0x%p)\n", socket->ops);
#endif
/* set proper values in socket->dev */
- socket->dev.class_data = socket;
+ dev_set_drvdata(&socket->dev, socket);
socket->dev.class = &pcmcia_socket_class;
- snprintf(socket->dev.class_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock);
+ snprintf(socket->dev.bus_id, BUS_ID_SIZE, "pcmcia_socket%u", socket->sock);
/* base address = 0, map = 0 */
socket->cis_mem.flags = 0;
skt->ops->set_socket(skt, &skt->socket);
/* register with the device core */
- ret = class_device_register(&skt->dev);
+ ret = device_register(&skt->dev);
if (ret) {
printk(KERN_WARNING "PCMCIA: unable to register socket 0x%p\n",
skt);
remove_wait_queue(&skt->thread_wait, &wait);
/* remove from the device core */
- class_device_unregister(&skt->dev);
+ device_unregister(&skt->dev);
return 0;
}
EXPORT_SYMBOL(pcmcia_insert_card);
-static int pcmcia_socket_uevent(struct class_device *dev, char **envp,
+static int pcmcia_socket_uevent(struct device *dev, char **envp,
int num_envp, char *buffer, int buffer_size)
{
struct pcmcia_socket *s = container_of(dev, struct pcmcia_socket, dev);
struct class pcmcia_socket_class = {
.name = "pcmcia_socket",
- .uevent = pcmcia_socket_uevent,
- .release = pcmcia_release_socket,
+ .dev_uevent = pcmcia_socket_uevent,
+ .dev_release = pcmcia_release_socket,
.class_release = pcmcia_release_socket_class,
};
EXPORT_SYMBOL(pcmcia_socket_class);
int pccard_register_pcmcia(struct pcmcia_socket *s, struct pcmcia_callback *c);
-#define cs_socket_name(skt) ((skt)->dev.class_id)
+#define cs_socket_name(skt) ((skt)->dev.bus_id)
#ifdef DEBUG
extern int cs_debug_level(int);
#endif
#define cs_err(skt, fmt, arg...) \
- printk(KERN_ERR "cs: %s: " fmt, (skt)->dev.class_id , ## arg)
+ printk(KERN_ERR "cs: %s: " fmt, (skt)->dev.bus_id , ## arg)
#endif /* _LINUX_CS_INTERNAL_H */
p_dev->func = function;
p_dev->dev.bus = &pcmcia_bus_type;
- p_dev->dev.parent = s->dev.dev;
+ p_dev->dev.parent = s->dev.parent;
p_dev->dev.release = pcmcia_release_dev;
bus_id_len = sprintf (p_dev->dev.bus_id, "%d.%d", p_dev->socket->sock, p_dev->device_no);
.resume = pcmcia_bus_resume,
};
-static int __devinit pcmcia_bus_add_socket(struct class_device *class_dev,
+static int __devinit pcmcia_bus_add_socket(struct device *dev,
struct class_interface *class_intf)
{
- struct pcmcia_socket *socket = class_get_devdata(class_dev);
+ struct pcmcia_socket *socket = dev_get_drvdata(dev);
int ret;
socket = pcmcia_get_socket(socket);
return 0;
}
-static void pcmcia_bus_remove_socket(struct class_device *class_dev,
+static void pcmcia_bus_remove_socket(struct device *dev,
struct class_interface *class_intf)
{
- struct pcmcia_socket *socket = class_get_devdata(class_dev);
+ struct pcmcia_socket *socket = dev_get_drvdata(dev);
if (!socket)
return;
/* the pcmcia_bus_interface is used to handle pcmcia socket devices */
static struct class_interface pcmcia_bus_interface = {
.class = &pcmcia_socket_class,
- .add = &pcmcia_bus_add_socket,
- .remove = &pcmcia_bus_remove_socket,
+ .add_dev = &pcmcia_bus_add_socket,
+ .remove_dev = &pcmcia_bus_remove_socket,
};
pci_set_drvdata(dev, &sockets[i].socket);
for (i = 0; i<socket_count; i++) {
- sockets[i].socket.dev.dev = &dev->dev;
+ sockets[i].socket.dev.parent = &dev->dev;
sockets[i].socket.ops = &i82092aa_operations;
sockets[i].socket.resource_ops = &pccard_nonstatic_ops;
ret = pcmcia_register_socket(&sockets[i].socket);
/* register sockets with the pcmcia core */
for (i = 0; i < sockets; i++) {
- socket[i].socket.dev.dev = &i82365_device->dev;
+ socket[i].socket.dev.parent = &i82365_device->dev;
socket[i].socket.ops = &pcic_operations;
socket[i].socket.resource_ops = &pccard_nonstatic_ops;
socket[i].socket.owner = THIS_MODULE;
#ifdef DEBUG
extern int ds_pc_debug;
-#define cs_socket_name(skt) ((skt)->dev.class_id)
#define ds_dbg(lvl, fmt, arg...) do { \
if (ds_pc_debug >= lvl) \
#ifdef DEBUG
extern int ds_pc_debug;
-#define cs_socket_name(skt) ((skt)->dev.class_id)
#define ds_dbg(skt, lvl, fmt, arg...) do { \
if (ds_pc_debug >= lvl) \
socket[i].socket.ops = &pd6729_operations;
socket[i].socket.resource_ops = &pccard_nonstatic_ops;
- socket[i].socket.dev.dev = &dev->dev;
+ socket[i].socket.dev.parent = &dev->dev;
socket[i].socket.driver_data = &socket[i];
}
static struct resource *nonstatic_find_io_region(unsigned long base, int num,
unsigned long align, struct pcmcia_socket *s)
{
- struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.class_id);
+ struct resource *res = make_resource(0, num, IORESOURCE_IO, s->dev.bus_id);
struct socket_data *s_data = s->resource_data;
struct pcmcia_align_data data;
unsigned long min = base;
static struct resource * nonstatic_find_mem_region(u_long base, u_long num,
u_long align, int low, struct pcmcia_socket *s)
{
- struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.class_id);
+ struct resource *res = make_resource(0, num, IORESOURCE_MEM, s->dev.bus_id);
struct socket_data *s_data = s->resource_data;
struct pcmcia_align_data data;
unsigned long min, max;
/* sysfs interface to the resource database */
-static ssize_t show_io_db(struct class_device *class_dev, char *buf)
+static ssize_t show_io_db(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
struct socket_data *data;
struct resource_map *p;
ssize_t ret = 0;
return (ret);
}
-static ssize_t store_io_db(struct class_device *class_dev, const char *buf, size_t count)
+static ssize_t store_io_db(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
unsigned long start_addr, end_addr;
unsigned int add = ADD_MANAGED_RESOURCE;
ssize_t ret = 0;
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(available_resources_io, 0600, show_io_db, store_io_db);
+static DEVICE_ATTR(available_resources_io, 0600, show_io_db, store_io_db);
-static ssize_t show_mem_db(struct class_device *class_dev, char *buf)
+static ssize_t show_mem_db(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
struct socket_data *data;
struct resource_map *p;
ssize_t ret = 0;
return (ret);
}
-static ssize_t store_mem_db(struct class_device *class_dev, const char *buf, size_t count)
+static ssize_t store_mem_db(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
unsigned long start_addr, end_addr;
unsigned int add = ADD_MANAGED_RESOURCE;
ssize_t ret = 0;
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(available_resources_mem, 0600, show_mem_db, store_mem_db);
+static DEVICE_ATTR(available_resources_mem, 0600, show_mem_db, store_mem_db);
-static struct class_device_attribute *pccard_rsrc_attributes[] = {
- &class_device_attr_available_resources_io,
- &class_device_attr_available_resources_mem,
+static struct device_attribute *pccard_rsrc_attributes[] = {
+ &dev_attr_available_resources_io,
+ &dev_attr_available_resources_mem,
NULL,
};
-static int __devinit pccard_sysfs_add_rsrc(struct class_device *class_dev,
+static int __devinit pccard_sysfs_add_rsrc(struct device *dev,
struct class_interface *class_intf)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
- struct class_device_attribute **attr;
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
+ struct device_attribute **attr;
int ret = 0;
if (s->resource_ops != &pccard_nonstatic_ops)
return 0;
for (attr = pccard_rsrc_attributes; *attr; attr++) {
- ret = class_device_create_file(class_dev, *attr);
+ ret = device_create_file(dev, *attr);
if (ret)
break;
}
return ret;
}
-static void __devexit pccard_sysfs_remove_rsrc(struct class_device *class_dev,
+static void __devexit pccard_sysfs_remove_rsrc(struct device *dev,
struct class_interface *class_intf)
{
- struct pcmcia_socket *s = class_get_devdata(class_dev);
- struct class_device_attribute **attr;
+ struct pcmcia_socket *s = dev_get_drvdata(dev);
+ struct device_attribute **attr;
if (s->resource_ops != &pccard_nonstatic_ops)
return;
for (attr = pccard_rsrc_attributes; *attr; attr++)
- class_device_remove_file(class_dev, *attr);
+ device_remove_file(dev, *attr);
}
static struct class_interface pccard_rsrc_interface = {
.class = &pcmcia_socket_class,
- .add = &pccard_sysfs_add_rsrc,
- .remove = __devexit_p(&pccard_sysfs_remove_rsrc),
+ .add_dev = &pccard_sysfs_add_rsrc,
+ .remove_dev = __devexit_p(&pccard_sysfs_remove_rsrc),
};
static int __init nonstatic_sysfs_init(void)
*
* Returns: the number of characters added to the buffer
*/
-static ssize_t show_status(struct class_device *class_dev, char *buf)
+static ssize_t show_status(struct device *dev, char *buf)
{
struct soc_pcmcia_socket *skt =
- container_of(class_dev, struct soc_pcmcia_socket, socket.dev);
+ container_of(dev, struct soc_pcmcia_socket, socket.dev);
char *p = buf;
p+=sprintf(p, "slot : %d\n", skt->nr);
add_timer(&skt->poll_timer);
- class_device_create_file(&skt->socket.dev, &class_device_attr_status);
+ device_create_file(&skt->socket.dev, &device_attr_status);
}
dev_set_drvdata(dev, sinfo);
#define to_socket(_dev) container_of(_dev, struct pcmcia_socket, dev)
-static ssize_t pccard_show_type(struct class_device *dev, char *buf)
+static ssize_t pccard_show_type(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
return sprintf(buf, "32-bit\n");
return sprintf(buf, "16-bit\n");
}
-static CLASS_DEVICE_ATTR(card_type, 0444, pccard_show_type, NULL);
+static DEVICE_ATTR(card_type, 0444, pccard_show_type, NULL);
-static ssize_t pccard_show_voltage(struct class_device *dev, char *buf)
+static ssize_t pccard_show_voltage(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
s->socket.Vcc % 10);
return sprintf(buf, "X.XV\n");
}
-static CLASS_DEVICE_ATTR(card_voltage, 0444, pccard_show_voltage, NULL);
+static DEVICE_ATTR(card_voltage, 0444, pccard_show_voltage, NULL);
-static ssize_t pccard_show_vpp(struct class_device *dev, char *buf)
+static ssize_t pccard_show_vpp(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
return sprintf(buf, "%d.%dV\n", s->socket.Vpp / 10, s->socket.Vpp % 10);
}
-static CLASS_DEVICE_ATTR(card_vpp, 0444, pccard_show_vpp, NULL);
+static DEVICE_ATTR(card_vpp, 0444, pccard_show_vpp, NULL);
-static ssize_t pccard_show_vcc(struct class_device *dev, char *buf)
+static ssize_t pccard_show_vcc(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
return sprintf(buf, "%d.%dV\n", s->socket.Vcc / 10, s->socket.Vcc % 10);
}
-static CLASS_DEVICE_ATTR(card_vcc, 0444, pccard_show_vcc, NULL);
+static DEVICE_ATTR(card_vcc, 0444, pccard_show_vcc, NULL);
-static ssize_t pccard_store_insert(struct class_device *dev, const char *buf, size_t count)
+static ssize_t pccard_store_insert(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
ssize_t ret;
struct pcmcia_socket *s = to_socket(dev);
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(card_insert, 0200, NULL, pccard_store_insert);
+static DEVICE_ATTR(card_insert, 0200, NULL, pccard_store_insert);
-static ssize_t pccard_show_card_pm_state(struct class_device *dev, char *buf)
+static ssize_t pccard_show_card_pm_state(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
return sprintf(buf, "%s\n", s->state & SOCKET_SUSPEND ? "off" : "on");
}
-static ssize_t pccard_store_card_pm_state(struct class_device *dev, const char *buf, size_t count)
+static ssize_t pccard_store_card_pm_state(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
ssize_t ret = -EINVAL;
struct pcmcia_socket *s = to_socket(dev);
return ret ? -ENODEV : count;
}
-static CLASS_DEVICE_ATTR(card_pm_state, 0644, pccard_show_card_pm_state, pccard_store_card_pm_state);
+static DEVICE_ATTR(card_pm_state, 0644, pccard_show_card_pm_state, pccard_store_card_pm_state);
-static ssize_t pccard_store_eject(struct class_device *dev, const char *buf, size_t count)
+static ssize_t pccard_store_eject(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
ssize_t ret;
struct pcmcia_socket *s = to_socket(dev);
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(card_eject, 0200, NULL, pccard_store_eject);
+static DEVICE_ATTR(card_eject, 0200, NULL, pccard_store_eject);
-static ssize_t pccard_show_irq_mask(struct class_device *dev, char *buf)
+static ssize_t pccard_show_irq_mask(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
return sprintf(buf, "0x%04x\n", s->irq_mask);
}
-static ssize_t pccard_store_irq_mask(struct class_device *dev, const char *buf, size_t count)
+static ssize_t pccard_store_irq_mask(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
ssize_t ret;
struct pcmcia_socket *s = to_socket(dev);
return ret ? ret : count;
}
-static CLASS_DEVICE_ATTR(card_irq_mask, 0600, pccard_show_irq_mask, pccard_store_irq_mask);
+static DEVICE_ATTR(card_irq_mask, 0600, pccard_show_irq_mask, pccard_store_irq_mask);
-static ssize_t pccard_show_resource(struct class_device *dev, char *buf)
+static ssize_t pccard_show_resource(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct pcmcia_socket *s = to_socket(dev);
return sprintf(buf, "%s\n", s->resource_setup_done ? "yes" : "no");
}
-static ssize_t pccard_store_resource(struct class_device *dev, const char *buf, size_t count)
+static ssize_t pccard_store_resource(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
{
unsigned long flags;
struct pcmcia_socket *s = to_socket(dev);
return count;
}
-static CLASS_DEVICE_ATTR(available_resources_setup_done, 0600, pccard_show_resource, pccard_store_resource);
+static DEVICE_ATTR(available_resources_setup_done, 0600, pccard_show_resource, pccard_store_resource);
static ssize_t pccard_extract_cis(struct pcmcia_socket *s, char *buf, loff_t off, size_t count)
if (off + count > size)
count = size - off;
- s = to_socket(container_of(kobj, struct class_device, kobj));
+ s = to_socket(container_of(kobj, struct device, kobj));
if (!(s->state & SOCKET_PRESENT))
return -ENODEV;
static ssize_t pccard_store_cis(struct kobject *kobj, char *buf, loff_t off, size_t count)
{
- struct pcmcia_socket *s = to_socket(container_of(kobj, struct class_device, kobj));
+ struct pcmcia_socket *s = to_socket(container_of(kobj, struct device, kobj));
cisdump_t *cis;
int error;
}
-static struct class_device_attribute *pccard_socket_attributes[] = {
- &class_device_attr_card_type,
- &class_device_attr_card_voltage,
- &class_device_attr_card_vpp,
- &class_device_attr_card_vcc,
- &class_device_attr_card_insert,
- &class_device_attr_card_pm_state,
- &class_device_attr_card_eject,
- &class_device_attr_card_irq_mask,
- &class_device_attr_available_resources_setup_done,
+static struct device_attribute *pccard_socket_attributes[] = {
+ &dev_attr_card_type,
+ &dev_attr_card_voltage,
+ &dev_attr_card_vpp,
+ &dev_attr_card_vcc,
+ &dev_attr_card_insert,
+ &dev_attr_card_pm_state,
+ &dev_attr_card_eject,
+ &dev_attr_card_irq_mask,
+ &dev_attr_available_resources_setup_done,
NULL,
};
.write = pccard_store_cis,
};
-static int __devinit pccard_sysfs_add_socket(struct class_device *class_dev,
+static int __devinit pccard_sysfs_add_socket(struct device *dev,
struct class_interface *class_intf)
{
- struct class_device_attribute **attr;
+ struct device_attribute **attr;
int ret = 0;
for (attr = pccard_socket_attributes; *attr; attr++) {
- ret = class_device_create_file(class_dev, *attr);
+ ret = device_create_file(dev, *attr);
if (ret)
break;
}
if (!ret)
- ret = sysfs_create_bin_file(&class_dev->kobj, &pccard_cis_attr);
+ ret = sysfs_create_bin_file(&dev->kobj, &pccard_cis_attr);
return ret;
}
-static void __devexit pccard_sysfs_remove_socket(struct class_device *class_dev,
+static void __devexit pccard_sysfs_remove_socket(struct device *dev,
struct class_interface *class_intf)
{
- struct class_device_attribute **attr;
+ struct device_attribute **attr;
- sysfs_remove_bin_file(&class_dev->kobj, &pccard_cis_attr);
+ sysfs_remove_bin_file(&dev->kobj, &pccard_cis_attr);
for (attr = pccard_socket_attributes; *attr; attr++)
- class_device_remove_file(class_dev, *attr);
+ device_remove_file(dev, *attr);
}
struct class_interface pccard_sysfs_interface = {
.class = &pcmcia_socket_class,
- .add = &pccard_sysfs_add_socket,
- .remove = __devexit_p(&pccard_sysfs_remove_socket),
+ .add_dev = &pccard_sysfs_add_socket,
+ .remove_dev = __devexit_p(&pccard_sysfs_remove_socket),
};
for (i = 0; i < sockets; i++) {
socket_table[i].socket.ops = &tcic_operations;
socket_table[i].socket.resource_ops = &pccard_nonstatic_ops;
- socket_table[i].socket.dev.dev = &tcic_device.dev;
+ socket_table[i].socket.dev.parent = &tcic_device.dev;
ret = pcmcia_register_socket(&socket_table[i].socket);
if (ret && i)
pcmcia_unregister_socket(&socket_table[0].socket);
/* prepare pcmcia_socket */
socket->socket.ops = ¥ta_socket_operations;
socket->socket.resource_ops = &pccard_nonstatic_ops;
- socket->socket.dev.dev = &dev->dev;
+ socket->socket.dev.parent = &dev->dev;
socket->socket.driver_data = socket;
socket->socket.owner = THIS_MODULE;
socket->socket.features = SS_CAP_PAGE_REGS | SS_CAP_PCCARD;
# Plug and Play ACPI configuration
#
config PNPACPI
- bool "Plug and Play ACPI support (EXPERIMENTAL)"
- depends on PNP && ACPI && EXPERIMENTAL
+ bool "Plug and Play ACPI support"
+ depends on PNP && ACPI
default y
---help---
Linux uses the PNPACPI to autodetect built-in
*
* Some code is based on pnpbios_core.c
* Copyright 2002 Adam Belay <ambx1@neo.rr.com>
- *
+ * (c) Copyright 2007 Hewlett-Packard Development Company, L.P.
+ * Bjorn Helgaas <bjorn.helgaas@hp.com>
*/
#include <linux/pnp.h>
{ "", 0 }
};
-static void reserve_ioport_range(char *pnpid, int start, int end)
+static void reserve_range(char *pnpid, int start, int end, int port)
{
struct resource *res;
char *regionid;
regionid = kmalloc(16, GFP_KERNEL);
- if ( regionid == NULL )
+ if (regionid == NULL)
return;
snprintf(regionid, 16, "pnp %s", pnpid);
- res = request_region(start,end-start+1,regionid);
- if ( res == NULL )
- kfree( regionid );
+ if (port)
+ res = request_region(start,end-start+1,regionid);
+ else
+ res = request_mem_region(start,end-start+1,regionid);
+ if (res == NULL)
+ kfree(regionid);
else
res->flags &= ~IORESOURCE_BUSY;
/*
* have double reservations.
*/
printk(KERN_INFO
- "pnp: %s: ioport range 0x%x-0x%x %s reserved\n",
- pnpid, start, end,
- NULL != res ? "has been" : "could not be"
- );
-
- return;
+ "pnp: %s: %s range 0x%x-0x%x %s reserved\n",
+ pnpid, port ? "ioport" : "iomem", start, end,
+ NULL != res ? "has been" : "could not be");
}
-static void reserve_resources_of_dev( struct pnp_dev *dev )
+static void reserve_resources_of_dev(struct pnp_dev *dev)
{
int i;
- for (i=0;i<PNP_MAX_PORT;i++) {
+ for (i = 0; i < PNP_MAX_PORT; i++) {
if (!pnp_port_valid(dev, i))
- /* end of resources */
continue;
if (pnp_port_start(dev, i) == 0)
- /* disabled */
- /* Do nothing */
- continue;
+ continue; /* disabled */
if (pnp_port_start(dev, i) < 0x100)
/*
* Below 0x100 is only standard PC hardware
*/
continue;
if (pnp_port_end(dev, i) < pnp_port_start(dev, i))
- /* invalid endpoint */
- /* Do nothing */
+ continue; /* invalid */
+
+ reserve_range(dev->dev.bus_id, pnp_port_start(dev, i),
+ pnp_port_end(dev, i), 1);
+ }
+
+ for (i = 0; i < PNP_MAX_MEM; i++) {
+ if (!pnp_mem_valid(dev, i))
continue;
- reserve_ioport_range(
- dev->dev.bus_id,
- pnp_port_start(dev, i),
- pnp_port_end(dev, i)
- );
+
+ reserve_range(dev->dev.bus_id, pnp_mem_start(dev, i),
+ pnp_mem_end(dev, i), 0);
}
return;
depends on TN3215_CONSOLE || TN3270_CONSOLE
default y
-config SCLP
- bool "Support for SCLP"
- help
- Include support for the SCLP interface to the service element.
-
config SCLP_TTY
bool "Support for SCLP line mode terminal"
- depends on SCLP
help
Include support for IBM SCLP line-mode terminals.
config SCLP_VT220_TTY
bool "Support for SCLP VT220-compatible terminal"
- depends on SCLP
help
Include support for an IBM SCLP VT220-compatible terminal.
config SCLP_CPI
tristate "Control-Program Identification"
- depends on SCLP
help
This option enables the hardware console interface for system
identification. This is commonly used for workload management and
# Makefile for the S/390 specific device drivers
#
+CFLAGS_sysinfo.o += -Iinclude/math-emu -Iarch/s390/math-emu -w
+
obj-y += s390mach.o sysinfo.o s390_rdev.o
obj-y += cio/ block/ char/ crypto/ net/ scsi/
*/
debug_info_t *dasd_debug_area;
struct dasd_discipline *dasd_diag_discipline_pointer;
+void dasd_int_handler(struct ccw_device *, unsigned long, struct irb *);
MODULE_AUTHOR("Holger Smolinski <Holger.Smolinski@de.ibm.com>");
MODULE_DESCRIPTION("Linux on S/390 DASD device driver,"
static void dasd_setup_queue(struct dasd_device * device);
static void dasd_free_queue(struct dasd_device * device);
static void dasd_flush_request_queue(struct dasd_device *);
-static void dasd_int_handler(struct ccw_device *, unsigned long, struct irb *);
static int dasd_flush_ccw_queue(struct dasd_device *, int);
static void dasd_tasklet(struct dasd_device *);
static void do_kick_device(struct work_struct *);
/*
* Add profiling information for cqr before execution.
*/
-static inline void
+static void
dasd_profile_start(struct dasd_device *device, struct dasd_ccw_req * cqr,
struct request *req)
{
/*
* Add profiling information for cqr after execution.
*/
-static inline void
+static void
dasd_profile_end(struct dasd_device *device, struct dasd_ccw_req * cqr,
struct request *req)
{
irb->scsw.cstat == 0 &&
!irb->esw.esw0.erw.cons)
era = dasd_era_none;
- else if (!test_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags))
- era = dasd_era_fatal; /* don't recover this request */
else if (irb->esw.esw0.erw.cons)
era = device->discipline->examine_error(cqr, irb);
else
/*
* Process ccw request queue.
*/
-static inline void
+static void
__dasd_process_ccw_queue(struct dasd_device * device,
struct list_head *final_queue)
{
cqr->status = DASD_CQR_FAILED;
cqr->stopclk = get_clock();
} else {
- if (cqr->irb.esw.esw0.erw.cons) {
+ if (cqr->irb.esw.esw0.erw.cons &&
+ test_bit(DASD_CQR_FLAGS_USE_ERP,
+ &cqr->flags)) {
erp_fn = device->discipline->
erp_action(cqr);
erp_fn(cqr);
/*
* Fetch requests from the block device queue.
*/
-static inline void
+static void
__dasd_process_blk_queue(struct dasd_device * device)
{
request_queue_t *queue;
if (IS_ERR(cqr)) {
if (PTR_ERR(cqr) == -ENOMEM)
break; /* terminate request queue loop */
+ if (PTR_ERR(cqr) == -EAGAIN) {
+ /*
+ * The current request cannot be build right
+ * now, we have to try later. If this request
+ * is the head-of-queue we stop the device
+ * for 1/2 second.
+ */
+ if (!list_empty(&device->ccw_queue))
+ break;
+ device->stopped |= DASD_STOPPED_PENDING;
+ dasd_set_timer(device, HZ/2);
+ break;
+ }
DBF_DEV_EVENT(DBF_ERR, device,
"CCW creation failed (rc=%ld) "
"on request %p",
* Take a look at the first request on the ccw queue and check
* if it reached its expire time. If so, terminate the IO.
*/
-static inline void
+static void
__dasd_check_expire(struct dasd_device * device)
{
struct dasd_ccw_req *cqr;
* Take a look at the first request on the ccw queue and check
* if it needs to be started.
*/
-static inline void
+static void
__dasd_start_head(struct dasd_device * device)
{
struct dasd_ccw_req *cqr;
/* log the erp chain if fatal error occurred */
if ((era == dasd_era_fatal) && (device->state >= DASD_STATE_READY)) {
dasd_log_sense(cqr, irb);
- dasd_log_ccw(cqr, 0, irb->scsw.cpa);
}
return era;
struct dasd_ccw_req *erp = NULL;
struct dasd_device *device = cqr->device;
- __u32 cpa = cqr->irb.scsw.cpa;
struct dasd_ccw_req *temp_erp = NULL;
if (device->features & DASD_FEATURE_ERPLOG) {
}
}
- if (erp->status == DASD_CQR_FAILED)
- dasd_log_ccw(erp, 1, cpa);
-
/* enqueue added ERP request */
if (erp->status == DASD_CQR_FILLED) {
erp->status = DASD_CQR_QUEUED;
/*
* Read a device busid/devno from a string.
*/
-static inline int
+static int
dasd_busid(char **str, int *id0, int *id1, int *devno)
{
int val, old_style;
* only one: "ro" for read-only devices. The default feature set
* is empty (value 0).
*/
-static inline int
+static int
dasd_feature_list(char *str, char **endp)
{
int features, len, rc;
return ERR_PTR(-EINVAL);
}
-static inline char *
+static char *
dasd_parse_next_element( char *parsestring ) {
char * residual_str;
residual_str = dasd_parse_keyword(parsestring);
#define DIAG_MAX_RETRIES 32
#define DIAG_TIMEOUT 50 * HZ
-struct dasd_discipline dasd_diag_discipline;
+static struct dasd_discipline dasd_diag_discipline;
struct dasd_diag_private {
struct dasd_diag_characteristics rdc_data;
* block offset. On success, return zero and set end_block to contain the
* number of blocks on the device minus the specified offset. Return non-zero
* otherwise. */
-static __inline__ int
+static inline int
mdsk_init_io(struct dasd_device *device, unsigned int blocksize,
blocknum_t offset, blocknum_t *end_block)
{
/* Remove block I/O environment for device. Return zero on success, non-zero
* otherwise. */
-static __inline__ int
+static inline int
mdsk_term_io(struct dasd_device * device)
{
struct dasd_diag_private *private;
"dump sense not available for DIAG data");
}
-struct dasd_discipline dasd_diag_discipline = {
+static struct dasd_discipline dasd_diag_discipline = {
.owner = THIS_MODULE,
.name = "DIAG",
.ebcname = "DIAG",
return (d1 + (d2 - 1)) / d2;
}
-static inline int
-bytes_per_record(struct dasd_eckd_characteristics *rdc, int kl, int dl)
-{
- unsigned int fl1, fl2, int1, int2;
- int bpr;
-
- switch (rdc->formula) {
- case 0x01:
- fl1 = round_up_multiple(ECKD_F2(rdc) + dl, ECKD_F1(rdc));
- fl2 = round_up_multiple(kl ? ECKD_F2(rdc) + kl : 0,
- ECKD_F1(rdc));
- bpr = fl1 + fl2;
- break;
- case 0x02:
- int1 = ceil_quot(dl + ECKD_F6(rdc), ECKD_F5(rdc) << 1);
- int2 = ceil_quot(kl + ECKD_F6(rdc), ECKD_F5(rdc) << 1);
- fl1 = round_up_multiple(ECKD_F1(rdc) * ECKD_F2(rdc) + dl +
- ECKD_F6(rdc) + ECKD_F4(rdc) * int1,
- ECKD_F1(rdc));
- fl2 = round_up_multiple(ECKD_F1(rdc) * ECKD_F3(rdc) + kl +
- ECKD_F6(rdc) + ECKD_F4(rdc) * int2,
- ECKD_F1(rdc));
- bpr = fl1 + fl2;
- break;
- default:
- bpr = 0;
- break;
- }
- return bpr;
-}
-
-static inline unsigned int
-bytes_per_track(struct dasd_eckd_characteristics *rdc)
-{
- return *(unsigned int *) (rdc->byte_per_track) >> 8;
-}
-
-static inline unsigned int
+static unsigned int
recs_per_track(struct dasd_eckd_characteristics * rdc,
unsigned int kl, unsigned int dl)
{
return 0;
}
-static inline void
+static int
check_XRC (struct ccw1 *de_ccw,
struct DE_eckd_data *data,
struct dasd_device *device)
{
struct dasd_eckd_private *private;
+ int rc;
private = (struct dasd_eckd_private *) device->private;
+ if (!private->rdc_data.facilities.XRC_supported)
+ return 0;
/* switch on System Time Stamp - needed for XRC Support */
- if (private->rdc_data.facilities.XRC_supported) {
-
- data->ga_extended |= 0x08; /* switch on 'Time Stamp Valid' */
- data->ga_extended |= 0x02; /* switch on 'Extended Parameter' */
-
- data->ep_sys_time = get_clock ();
-
- de_ccw->count = sizeof (struct DE_eckd_data);
- de_ccw->flags |= CCW_FLAG_SLI;
- }
+ data->ga_extended |= 0x08; /* switch on 'Time Stamp Valid' */
+ data->ga_extended |= 0x02; /* switch on 'Extended Parameter' */
- return;
+ rc = get_sync_clock(&data->ep_sys_time);
+ /* Ignore return code if sync clock is switched off. */
+ if (rc == -ENOSYS || rc == -EACCES)
+ rc = 0;
-} /* end check_XRC */
+ de_ccw->count = sizeof (struct DE_eckd_data);
+ de_ccw->flags |= CCW_FLAG_SLI;
+ return rc;
+}
-static inline void
+static int
define_extent(struct ccw1 * ccw, struct DE_eckd_data * data, int trk,
int totrk, int cmd, struct dasd_device * device)
{
struct dasd_eckd_private *private;
struct ch_t geo, beg, end;
+ int rc = 0;
private = (struct dasd_eckd_private *) device->private;
case DASD_ECKD_CCW_WRITE_KD_MT:
data->mask.perm = 0x02;
data->attributes.operation = private->attrib.operation;
- check_XRC (ccw, data, device);
+ rc = check_XRC (ccw, data, device);
break;
case DASD_ECKD_CCW_WRITE_CKD:
case DASD_ECKD_CCW_WRITE_CKD_MT:
data->attributes.operation = DASD_BYPASS_CACHE;
- check_XRC (ccw, data, device);
+ rc = check_XRC (ccw, data, device);
break;
case DASD_ECKD_CCW_ERASE:
case DASD_ECKD_CCW_WRITE_HOME_ADDRESS:
data->mask.perm = 0x3;
data->mask.auth = 0x1;
data->attributes.operation = DASD_BYPASS_CACHE;
- check_XRC (ccw, data, device);
+ rc = check_XRC (ccw, data, device);
break;
default:
DEV_MESSAGE(KERN_ERR, device, "unknown opcode 0x%x", cmd);
data->beg_ext.head = beg.head;
data->end_ext.cyl = end.cyl;
data->end_ext.head = end.head;
+ return rc;
}
-static inline void
+static void
locate_record(struct ccw1 *ccw, struct LO_eckd_data *data, int trk,
int rec_on_trk, int no_rec, int cmd,
struct dasd_device * device, int reclen)
/*
* Build CP for Perform Subsystem Function - SSC.
*/
-struct dasd_ccw_req *
+static struct dasd_ccw_req *
dasd_eckd_build_psf_ssc(struct dasd_device *device)
{
struct dasd_ccw_req *cqr;
return cqr;
ccw = cqr->cpaddr;
/* First ccw is define extent. */
- define_extent(ccw++, cqr->data, first_trk, last_trk, cmd, device);
+ if (define_extent(ccw++, cqr->data, first_trk,
+ last_trk, cmd, device) == -EAGAIN) {
+ /* Clock not in sync and XRC is enabled. Try again later. */
+ dasd_sfree_request(cqr, device);
+ return ERR_PTR(-EAGAIN);
+ }
/* Build locate_record+read/write/ccws. */
idaws = (unsigned long *) (cqr->data + sizeof(struct DE_eckd_data));
LO_data = (struct LO_eckd_data *) (idaws + cidaw);
cqr->device = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
- cqr->retries = 0;
+ cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
cqr->device = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
- cqr->retries = 0;
+ cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
cqr->device = device;
clear_bit(DASD_CQR_FLAGS_USE_ERP, &cqr->flags);
set_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags);
- cqr->retries = 0;
+ cqr->retries = 2; /* set retry counter to enable basic ERP */
cqr->expires = 2 * HZ;
cqr->buildclk = get_clock();
cqr->status = DASD_CQR_FILLED;
* Dump the range of CCWs into 'page' buffer
* and return number of printed chars.
*/
-static inline int
+static int
dasd_eckd_dump_ccw_range(struct ccw1 *from, struct ccw1 *to, char *page)
{
int len, count;
.owner = THIS_MODULE,
};
-static struct miscdevice dasd_eer_dev = {
- .minor = MISC_DYNAMIC_MINOR,
- .name = "dasd_eer",
- .fops = &dasd_eer_fops,
-};
+static struct miscdevice *dasd_eer_dev = NULL;
int __init dasd_eer_init(void)
{
int rc;
- rc = misc_register(&dasd_eer_dev);
+ dasd_eer_dev = kzalloc(sizeof(*dasd_eer_dev), GFP_KERNEL);
+ if (!dasd_eer_dev)
+ return -ENOMEM;
+
+ dasd_eer_dev->minor = MISC_DYNAMIC_MINOR;
+ dasd_eer_dev->name = "dasd_eer";
+ dasd_eer_dev->fops = &dasd_eer_fops;
+
+ rc = misc_register(dasd_eer_dev);
if (rc) {
+ kfree(dasd_eer_dev);
+ dasd_eer_dev = NULL;
MESSAGE(KERN_ERR, "%s", "dasd_eer_init could not "
"register misc device");
return rc;
void dasd_eer_exit(void)
{
- WARN_ON(misc_deregister(&dasd_eer_dev) != 0);
+ if (dasd_eer_dev) {
+ WARN_ON(misc_deregister(dasd_eer_dev) != 0);
+ kfree(dasd_eer_dev);
+ dasd_eer_dev = NULL;
+ }
}
} /* end default_erp_postaction */
-/*
- * Print the hex dump of the memory used by a request. This includes
- * all error recovery ccws that have been chained in from of the
- * real request.
- */
-static inline void
-hex_dump_memory(struct dasd_device *device, void *data, int len)
-{
- int *pint;
-
- pint = (int *) data;
- while (len > 0) {
- DEV_MESSAGE(KERN_ERR, device, "%p: %08x %08x %08x %08x",
- pint, pint[0], pint[1], pint[2], pint[3]);
- pint += 4;
- len -= 16;
- }
-}
-
void
dasd_log_sense(struct dasd_ccw_req *cqr, struct irb *irb)
{
device->discipline->dump_sense(device, cqr, irb);
}
-void
-dasd_log_ccw(struct dasd_ccw_req * cqr, int caller, __u32 cpa)
-{
- struct dasd_device *device;
- struct dasd_ccw_req *lcqr;
- struct ccw1 *ccw;
- int cplength;
-
- device = cqr->device;
- /* log the channel program */
- for (lcqr = cqr; lcqr != NULL; lcqr = lcqr->refers) {
- DEV_MESSAGE(KERN_ERR, device,
- "(%s) ERP chain report for req: %p",
- caller == 0 ? "EXAMINE" : "ACTION", lcqr);
- hex_dump_memory(device, lcqr, sizeof(struct dasd_ccw_req));
-
- cplength = 1;
- ccw = lcqr->cpaddr;
- while (ccw++->flags & (CCW_FLAG_DC | CCW_FLAG_CC))
- cplength++;
-
- if (cplength > 40) { /* log only parts of the CP */
- DEV_MESSAGE(KERN_ERR, device, "%s",
- "Start of channel program:");
- hex_dump_memory(device, lcqr->cpaddr,
- 40*sizeof(struct ccw1));
-
- DEV_MESSAGE(KERN_ERR, device, "%s",
- "End of channel program:");
- hex_dump_memory(device, lcqr->cpaddr + cplength - 10,
- 10*sizeof(struct ccw1));
- } else { /* log the whole CP */
- DEV_MESSAGE(KERN_ERR, device, "%s",
- "Channel program (complete):");
- hex_dump_memory(device, lcqr->cpaddr,
- cplength*sizeof(struct ccw1));
- }
-
- if (lcqr != cqr)
- continue;
-
- /*
- * Log bytes arround failed CCW but only if we did
- * not log the whole CP of the CCW is outside the
- * logged CP.
- */
- if (cplength > 40 ||
- ((addr_t) cpa < (addr_t) lcqr->cpaddr &&
- (addr_t) cpa > (addr_t) (lcqr->cpaddr + cplength + 4))) {
-
- DEV_MESSAGE(KERN_ERR, device,
- "Failed CCW (%p) (area):",
- (void *) (long) cpa);
- hex_dump_memory(device, cqr->cpaddr - 10,
- 20*sizeof(struct ccw1));
- }
- }
-
-} /* end log_erp_chain */
-
EXPORT_SYMBOL(dasd_default_erp_action);
EXPORT_SYMBOL(dasd_default_erp_postaction);
EXPORT_SYMBOL(dasd_alloc_erp_request);
EXPORT_SYMBOL(dasd_free_erp_request);
EXPORT_SYMBOL(dasd_log_sense);
-EXPORT_SYMBOL(dasd_log_ccw);
.notify = dasd_generic_notify,
};
-static inline void
+static void
define_extent(struct ccw1 * ccw, struct DE_fba_data *data, int rw,
int blksize, int beg, int nr)
{
data->ext_end = nr - 1;
}
-static inline void
+static void
locate_record(struct ccw1 * ccw, struct LO_fba_data *data, int rw,
int block_nr, int block_ct)
{
*/
memset(&bpart, 0, sizeof(struct blkpg_partition));
memset(&barg, 0, sizeof(struct blkpg_ioctl_arg));
- barg.data = (void __user *) &bpart;
+ barg.data = (void __force __user *) &bpart;
barg.op = BLKPG_DEL_PARTITION;
for (bpart.pno = device->gdp->minors - 1; bpart.pno > 0; bpart.pno--)
ioctl_by_bdev(bdev, BLKPG, (unsigned long) &barg);
struct dasd_device *);
void dasd_free_erp_request(struct dasd_ccw_req *, struct dasd_device *);
void dasd_log_sense(struct dasd_ccw_req *, struct irb *);
-void dasd_log_ccw(struct dasd_ccw_req *, int, __u32);
/* externals in dasd_3370_erp.c */
dasd_era_t dasd_3370_erp_examine(struct dasd_ccw_req *, struct irb *);
static struct proc_dir_entry *dasd_devices_entry = NULL;
static struct proc_dir_entry *dasd_statistics_entry = NULL;
-static inline char *
+static char *
dasd_get_user_string(const char __user *user_buf, size_t user_len)
{
char *buffer;
.release = seq_release,
};
-static inline int
+static int
dasd_calc_metrics(char *page, char **start, off_t off,
int count, int *eof, int len)
{
return len;
}
-static inline char *
-dasd_statistics_array(char *str, int *array, int shift)
+static char *
+dasd_statistics_array(char *str, unsigned int *array, int shift)
{
int i;
* device needs to be enqueued before the semaphore is
* freed.
*/
-static inline int
+static int
dcssblk_assign_free_minor(struct dcssblk_dev_info *dev_info)
{
int minor, found;
SEGMENT_SHARED);
if (rc < 0) {
BUG_ON(rc == -EINVAL);
- if (rc == -EIO || rc == -ENOENT)
+ if (rc != -EAGAIN)
goto removeseg;
} else {
dev_info->is_shared = 1;
SEGMENT_EXCLUSIVE);
if (rc < 0) {
BUG_ON(rc == -EINVAL);
- if (rc == -EIO || rc == -ENOENT)
+ if (rc != -EAGAIN)
goto removeseg;
} else {
dev_info->is_shared = 0;
# S/390 character devices
#
-obj-y += ctrlchar.o keyboard.o defkeymap.o
+obj-y += ctrlchar.o keyboard.o defkeymap.o sclp.o sclp_rw.o sclp_quiesce.o \
+ sclp_info.o
obj-$(CONFIG_TN3270) += raw3270.o
obj-$(CONFIG_TN3270_CONSOLE) += con3270.o
obj-$(CONFIG_TN3215) += con3215.o
-obj-$(CONFIG_SCLP) += sclp.o sclp_rw.o sclp_quiesce.o
obj-$(CONFIG_SCLP_TTY) += sclp_tty.o
obj-$(CONFIG_SCLP_CONSOLE) += sclp_con.o
obj-$(CONFIG_SCLP_VT220_TTY) += sclp_vt220.o
* 3215 tty registration code called from tty_init().
* Most kernel services (incl. kmalloc) are available at this poimt.
*/
-int __init
+static int __init
tty3215_init(void)
{
struct tty_driver *driver;
/*
* Setup timeout for a device. On timeout trigger an update.
*/
-void
-con3270_set_timer(struct con3270 *cp, int expires)
+static void con3270_set_timer(struct con3270 *cp, int expires)
{
if (expires == 0) {
if (timer_pending(&cp->timer))
#include <linux/types.h>
#include <linux/keyboard.h>
#include <linux/kd.h>
+#include <linux/kbd_kern.h>
+#include <linux/kbd_diacr.h>
u_short plain_map[NR_KEYS] = {
0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000, 0xf000,
#include "raw3270.h"
#include "ctrlchar.h"
-struct raw3270_fn fs3270_fn;
+static struct raw3270_fn fs3270_fn;
struct fs3270 {
struct raw3270_view view;
}
/* View to a 3270 device. Can be console, tty or fullscreen. */
-struct raw3270_fn fs3270_fn = {
+static struct raw3270_fn fs3270_fn = {
.activate = fs3270_activate,
.deactivate = fs3270_deactivate,
.intv = (void *) fs3270_irq,
}
}
+#if 0
/*
* Generate ebcdic -> ascii translation table from kbd_data.
*/
}
}
}
+#endif
/*
* We have a combining character DIACR here, followed by the character CH.
return -EINVAL;
}
-static inline struct mon_buf *monwrite_find_hdr(struct mon_private *monpriv,
- struct monwrite_hdr *monhdr)
+static struct mon_buf *monwrite_find_hdr(struct mon_private *monpriv,
+ struct monwrite_hdr *monhdr)
{
struct mon_buf *entry, *next;
#include <linux/device.h>
#include <linux/mutex.h>
-struct class *class3270;
+static struct class *class3270;
/* The main 3270 data structure. */
struct raw3270 {
/*
* Encode array for 12 bit 3270 addresses.
*/
-unsigned char raw3270_ebcgraf[64] = {
+static unsigned char raw3270_ebcgraf[64] = {
0x40, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7,
0xc8, 0xc9, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
0x50, 0xd1, 0xd2, 0xd3, 0xd4, 0xd5, 0xd6, 0xd7,
/* Internal state: is a request active at the sclp? */
static volatile enum sclp_running_state_t {
sclp_running_state_idle,
- sclp_running_state_running
+ sclp_running_state_running,
+ sclp_running_state_reset_pending
} sclp_running_state = sclp_running_state_idle;
/* Internal state: is a read request pending? */
/* Timeout intervals in seconds.*/
#define SCLP_BUSY_INTERVAL 10
-#define SCLP_RETRY_INTERVAL 15
+#define SCLP_RETRY_INTERVAL 30
static void sclp_process_queue(void);
static int sclp_init_mask(int calculate);
static int sclp_init(void);
/* Perform service call. Return 0 on success, non-zero otherwise. */
-static int
-service_call(sclp_cmdw_t command, void *sccb)
+int
+sclp_service_call(sclp_cmdw_t command, void *sccb)
{
int cc;
return 0;
}
-/* Request timeout handler. Restart the request queue. If DATA is non-zero,
- * force restart of running request. */
+static inline void __sclp_make_read_req(void);
+
static void
-sclp_request_timeout(unsigned long data)
+__sclp_queue_read_req(void)
{
- unsigned long flags;
-
- if (data) {
- spin_lock_irqsave(&sclp_lock, flags);
- sclp_running_state = sclp_running_state_idle;
- spin_unlock_irqrestore(&sclp_lock, flags);
+ if (sclp_reading_state == sclp_reading_state_idle) {
+ sclp_reading_state = sclp_reading_state_reading;
+ __sclp_make_read_req();
+ /* Add request to head of queue */
+ list_add(&sclp_read_req.list, &sclp_req_queue);
}
- sclp_process_queue();
}
/* Set up request retry timer. Called while sclp_lock is locked. */
add_timer(&sclp_request_timer);
}
+/* Request timeout handler. Restart the request queue. If DATA is non-zero,
+ * force restart of running request. */
+static void
+sclp_request_timeout(unsigned long data)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&sclp_lock, flags);
+ if (data) {
+ if (sclp_running_state == sclp_running_state_running) {
+ /* Break running state and queue NOP read event request
+ * to get a defined interface state. */
+ __sclp_queue_read_req();
+ sclp_running_state = sclp_running_state_idle;
+ }
+ } else {
+ __sclp_set_request_timer(SCLP_BUSY_INTERVAL * HZ,
+ sclp_request_timeout, 0);
+ }
+ spin_unlock_irqrestore(&sclp_lock, flags);
+ sclp_process_queue();
+}
+
/* Try to start a request. Return zero if the request was successfully
* started or if it will be started at a later time. Return non-zero otherwise.
* Called while sclp_lock is locked. */
if (sclp_running_state != sclp_running_state_idle)
return 0;
del_timer(&sclp_request_timer);
- rc = service_call(req->command, req->sccb);
+ rc = sclp_service_call(req->command, req->sccb);
req->start_count++;
if (rc == 0) {
rc = __sclp_start_request(req);
if (rc == 0)
break;
- /* Request failed. */
+ /* Request failed */
+ if (req->start_count > 1) {
+ /* Cannot abort already submitted request - could still
+ * be active at the SCLP */
+ __sclp_set_request_timer(SCLP_BUSY_INTERVAL * HZ,
+ sclp_request_timeout, 0);
+ break;
+ }
+ /* Post-processing for aborted request */
list_del(&req->list);
if (req->callback) {
spin_unlock_irqrestore(&sclp_lock, flags);
list_add_tail(&req->list, &sclp_req_queue);
rc = 0;
/* Start if request is first in list */
- if (req->list.prev == &sclp_req_queue) {
+ if (sclp_running_state == sclp_running_state_idle &&
+ req->list.prev == &sclp_req_queue) {
rc = __sclp_start_request(req);
if (rc)
list_del(&req->list);
sccb = (struct sccb_header *) sclp_read_sccb;
clear_page(sccb);
memset(&sclp_read_req, 0, sizeof(struct sclp_req));
- sclp_read_req.command = SCLP_CMDW_READDATA;
+ sclp_read_req.command = SCLP_CMDW_READ_EVENT_DATA;
sclp_read_req.status = SCLP_REQ_QUEUED;
sclp_read_req.start_count = 0;
sclp_read_req.callback = sclp_read_cb;
finished_sccb = S390_lowcore.ext_params & 0xfffffff8;
evbuf_pending = S390_lowcore.ext_params & 0x3;
if (finished_sccb) {
+ del_timer(&sclp_request_timer);
+ sclp_running_state = sclp_running_state_reset_pending;
req = __sclp_find_req(finished_sccb);
if (req) {
/* Request post-processing */
sclp_running_state = sclp_running_state_idle;
}
if (evbuf_pending && sclp_receive_mask != 0 &&
- sclp_reading_state == sclp_reading_state_idle &&
- sclp_activation_state == sclp_activation_state_active ) {
- sclp_reading_state = sclp_reading_state_reading;
- __sclp_make_read_req();
- /* Add request to head of queue */
- list_add(&sclp_read_req.list, &sclp_req_queue);
- }
+ sclp_activation_state == sclp_activation_state_active)
+ __sclp_queue_read_req();
spin_unlock(&sclp_lock);
sclp_process_queue();
}
unsigned long flags;
unsigned long cr0, cr0_sync;
u64 timeout;
+ int irq_context;
/* We'll be disabling timer interrupts, so we need a custom timeout
* mechanism */
}
local_irq_save(flags);
/* Prevent bottom half from executing once we force interrupts open */
- local_bh_disable();
+ irq_context = in_interrupt();
+ if (!irq_context)
+ local_bh_disable();
/* Enable service-signal interruption, disable timer interrupts */
trace_hardirqs_on();
__ctl_store(cr0, 0, 0);
get_clock() > timeout &&
del_timer(&sclp_request_timer))
sclp_request_timer.function(sclp_request_timer.data);
- barrier();
cpu_relax();
}
local_irq_disable();
__ctl_load(cr0, 0, 0);
- _local_bh_enable();
+ if (!irq_context)
+ _local_bh_enable();
local_irq_restore(flags);
}
EXPORT_SYMBOL(sclp_sync_wait);
/* Dispatch changes in send and receive mask to registered listeners. */
-static inline void
+static void
sclp_dispatch_state_change(void)
{
struct list_head *l;
sccb = (struct init_sccb *) sclp_init_sccb;
clear_page(sccb);
memset(&sclp_init_req, 0, sizeof(struct sclp_req));
- sclp_init_req.command = SCLP_CMDW_WRITEMASK;
+ sclp_init_req.command = SCLP_CMDW_WRITE_EVENT_MASK;
sclp_init_req.status = SCLP_REQ_FILLED;
sclp_init_req.start_count = 0;
sclp_init_req.callback = NULL;
for (retry = 0; retry <= SCLP_INIT_RETRY; retry++) {
__sclp_make_init_req(0, 0);
sccb = (struct init_sccb *) sclp_init_req.sccb;
- rc = service_call(sclp_init_req.command, sccb);
+ rc = sclp_service_call(sclp_init_req.command, sccb);
if (rc == -EIO)
break;
sclp_init_req.status = SCLP_REQ_RUNNING;
#include <linux/types.h>
#include <linux/list.h>
-
+#include <asm/sclp.h>
#include <asm/ebcdic.h>
/* maximum number of pages concerning our own memory management */
typedef unsigned int sclp_cmdw_t;
-#define SCLP_CMDW_READDATA 0x00770005
-#define SCLP_CMDW_WRITEDATA 0x00760005
-#define SCLP_CMDW_WRITEMASK 0x00780005
+#define SCLP_CMDW_READ_EVENT_DATA 0x00770005
+#define SCLP_CMDW_WRITE_EVENT_DATA 0x00760005
+#define SCLP_CMDW_WRITE_EVENT_MASK 0x00780005
+#define SCLP_CMDW_READ_SCP_INFO 0x00020001
+#define SCLP_CMDW_READ_SCP_INFO_FORCED 0x00120001
#define GDS_ID_MDSMU 0x1310
#define GDS_ID_MDSRouteInfo 0x1311
typedef u32 sccb_mask_t; /* ATTENTION: assumes 32bit mask !!! */
-struct sccb_header {
- u16 length;
- u8 function_code;
- u8 control_mask[3];
- u16 response_code;
-} __attribute__((packed));
-
struct gds_subvector {
u8 length;
u8 key;
int sclp_remove_processed(struct sccb_header *sccb);
int sclp_deactivate(void);
int sclp_reactivate(void);
+int sclp_service_call(sclp_cmdw_t command, void *sccb);
/* useful inlines */
} while (buffer && sclp_emit_buffer(buffer, sclp_conbuf_callback));
}
-static inline void
+static void
sclp_conbuf_emit(void)
{
struct sclp_buffer* buffer;
}
/* prepare request data structure presented to SCLP driver */
- req->command = SCLP_CMDW_WRITEDATA;
+ req->command = SCLP_CMDW_WRITE_EVENT_DATA;
req->sccb = sccb;
req->status = SCLP_REQ_FILLED;
req->callback = cpi_callback;
--- /dev/null
+/*
+ * drivers/s390/char/sclp_info.c
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <asm/sclp.h>
+#include "sclp.h"
+
+struct sclp_readinfo_sccb s390_readinfo_sccb;
+
+void __init sclp_readinfo_early(void)
+{
+ sclp_cmdw_t command;
+ struct sccb_header *sccb;
+ int ret;
+
+ __ctl_set_bit(0, 9); /* enable service signal subclass mask */
+
+ sccb = &s390_readinfo_sccb.header;
+ command = SCLP_CMDW_READ_SCP_INFO_FORCED;
+ while (1) {
+ u16 response;
+
+ memset(&s390_readinfo_sccb, 0, sizeof(s390_readinfo_sccb));
+ sccb->length = sizeof(s390_readinfo_sccb);
+ sccb->control_mask[2] = 0x80;
+
+ ret = sclp_service_call(command, &s390_readinfo_sccb);
+
+ if (ret == -EIO)
+ goto out;
+ if (ret == -EBUSY)
+ continue;
+
+ __load_psw_mask(PSW_BASE_BITS | PSW_MASK_EXT |
+ PSW_MASK_WAIT | PSW_DEFAULT_KEY);
+ local_irq_disable();
+ barrier();
+
+ response = sccb->response_code;
+
+ if (response == 0x10)
+ break;
+
+ if (response != 0x1f0 || command == SCLP_CMDW_READ_SCP_INFO)
+ break;
+
+ command = SCLP_CMDW_READ_SCP_INFO;
+ }
+out:
+ __ctl_clear_bit(0, 9); /* disable service signal subclass mask */
+}
sccb->msg_buf.header.type = EvTyp_PMsgCmd;
else
return -ENOSYS;
- buffer->request.command = SCLP_CMDW_WRITEDATA;
+ buffer->request.command = SCLP_CMDW_WRITE_EVENT_DATA;
buffer->request.status = SCLP_REQ_FILLED;
buffer->request.callback = sclp_writedata_callback;
buffer->request.callback_data = buffer;
.ioctl = sclp_tty_ioctl,
};
-int __init
+static int __init
sclp_tty_init(void)
{
struct tty_driver *driver;
request->sclp_req.status = SCLP_REQ_FAILED;
return -EIO;
}
- request->sclp_req.command = SCLP_CMDW_WRITEDATA;
+ request->sclp_req.command = SCLP_CMDW_WRITE_EVENT_DATA;
request->sclp_req.status = SCLP_REQ_FILLED;
request->sclp_req.callback = sclp_vt220_callback;
request->sclp_req.callback_data = (void *) request;
/*
* Register driver with SCLP and Linux and initialize internal tty structures.
*/
-int __init
+static int __init
sclp_vt220_tty_init(void)
{
struct tty_driver *driver;
* tape device driver for 3480/3490E/3590 tapes.
*
* S390 and zSeries version
- * Copyright (C) 2001,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2001,2006
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Tuan Ngo-Anh <ngoanh@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
TO_DIS, /* Tape display */
TO_ASSIGN, /* Assign tape to channel path */
TO_UNASSIGN, /* Unassign tape from channel path */
- TO_SIZE /* #entries in tape_op_t */
+ TO_CRYPT_ON, /* Enable encrpytion */
+ TO_CRYPT_OFF, /* Disable encrpytion */
+ TO_KEKL_SET, /* Set KEK label */
+ TO_KEKL_QUERY, /* Query KEK label */
+ TO_SIZE, /* #entries in tape_op_t */
};
/* Forward declaration */
TAPE_REQUEST_IN_IO, /* request is currently in IO */
TAPE_REQUEST_DONE, /* request is completed. */
TAPE_REQUEST_CANCEL, /* request should be canceled. */
+ TAPE_REQUEST_LONG_BUSY, /* request has to be restarted after long busy */
};
/* Tape CCW request */
* The discipline irq function either returns an error code (<0) which
* means that the request has failed with an error or one of the following:
*/
-#define TAPE_IO_SUCCESS 0 /* request successful */
-#define TAPE_IO_PENDING 1 /* request still running */
-#define TAPE_IO_RETRY 2 /* retry to current request */
-#define TAPE_IO_STOP 3 /* stop the running request */
+#define TAPE_IO_SUCCESS 0 /* request successful */
+#define TAPE_IO_PENDING 1 /* request still running */
+#define TAPE_IO_RETRY 2 /* retry to current request */
+#define TAPE_IO_STOP 3 /* stop the running request */
+#define TAPE_IO_LONG_BUSY 4 /* delay the running request */
/* Char Frontend Data */
struct tape_char_data {
/* Function to start or stop the next request later. */
struct delayed_work tape_dnr;
+
+ /* Timer for long busy */
+ struct timer_list lb_timeout;
+
};
/* Externals from tape_core.c */
* drivers/s390/char/tape_3590.c
* tape device discipline for 3590 tapes.
*
- * Copyright (C) IBM Corp. 2001,2006
+ * Copyright IBM Corp. 2001,2006
* Author(s): Stefan Bader <shbader@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/bio.h>
+#include <asm/ebcdic.h>
#define TAPE_DBF_AREA tape_3590_dbf
* - Read Device (buffered) log: BRA
* - Read Library log: BRA
* - Swap Devices: BRA
- * - Long Busy: BRA
+ * - Long Busy: implemented
* - Special Intercept: BRA
* - Read Alternate: implemented
*******************************************************************/
[0xae] = "Subsystem environmental alert",
};
+static int crypt_supported(struct tape_device *device)
+{
+ return TAPE390_CRYPT_SUPPORTED(TAPE_3590_CRYPT_INFO(device));
+}
+
+static int crypt_enabled(struct tape_device *device)
+{
+ return TAPE390_CRYPT_ON(TAPE_3590_CRYPT_INFO(device));
+}
+
+static void ext_to_int_kekl(struct tape390_kekl *in,
+ struct tape3592_kekl *out)
+{
+ int i;
+
+ memset(out, 0, sizeof(*out));
+ if (in->type == TAPE390_KEKL_TYPE_HASH)
+ out->flags |= 0x40;
+ if (in->type_on_tape == TAPE390_KEKL_TYPE_HASH)
+ out->flags |= 0x80;
+ strncpy(out->label, in->label, 64);
+ for (i = strlen(in->label); i < sizeof(out->label); i++)
+ out->label[i] = ' ';
+ ASCEBC(out->label, sizeof(out->label));
+}
+
+static void int_to_ext_kekl(struct tape3592_kekl *in,
+ struct tape390_kekl *out)
+{
+ memset(out, 0, sizeof(*out));
+ if(in->flags & 0x40)
+ out->type = TAPE390_KEKL_TYPE_HASH;
+ else
+ out->type = TAPE390_KEKL_TYPE_LABEL;
+ if(in->flags & 0x80)
+ out->type_on_tape = TAPE390_KEKL_TYPE_HASH;
+ else
+ out->type_on_tape = TAPE390_KEKL_TYPE_LABEL;
+ memcpy(out->label, in->label, sizeof(in->label));
+ EBCASC(out->label, sizeof(in->label));
+ strstrip(out->label);
+}
+
+static void int_to_ext_kekl_pair(struct tape3592_kekl_pair *in,
+ struct tape390_kekl_pair *out)
+{
+ if (in->count == 0) {
+ out->kekl[0].type = TAPE390_KEKL_TYPE_NONE;
+ out->kekl[0].type_on_tape = TAPE390_KEKL_TYPE_NONE;
+ out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
+ out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
+ } else if (in->count == 1) {
+ int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
+ out->kekl[1].type = TAPE390_KEKL_TYPE_NONE;
+ out->kekl[1].type_on_tape = TAPE390_KEKL_TYPE_NONE;
+ } else if (in->count == 2) {
+ int_to_ext_kekl(&in->kekl[0], &out->kekl[0]);
+ int_to_ext_kekl(&in->kekl[1], &out->kekl[1]);
+ } else {
+ printk("Invalid KEKL number: %d\n", in->count);
+ BUG();
+ }
+}
+
+static int check_ext_kekl(struct tape390_kekl *kekl)
+{
+ if (kekl->type == TAPE390_KEKL_TYPE_NONE)
+ goto invalid;
+ if (kekl->type > TAPE390_KEKL_TYPE_HASH)
+ goto invalid;
+ if (kekl->type_on_tape == TAPE390_KEKL_TYPE_NONE)
+ goto invalid;
+ if (kekl->type_on_tape > TAPE390_KEKL_TYPE_HASH)
+ goto invalid;
+ if ((kekl->type == TAPE390_KEKL_TYPE_HASH) &&
+ (kekl->type_on_tape == TAPE390_KEKL_TYPE_LABEL))
+ goto invalid;
+
+ return 0;
+invalid:
+ return -EINVAL;
+}
+
+static int check_ext_kekl_pair(struct tape390_kekl_pair *kekls)
+{
+ if (check_ext_kekl(&kekls->kekl[0]))
+ goto invalid;
+ if (check_ext_kekl(&kekls->kekl[1]))
+ goto invalid;
+
+ return 0;
+invalid:
+ return -EINVAL;
+}
+
+/*
+ * Query KEKLs
+ */
+static int tape_3592_kekl_query(struct tape_device *device,
+ struct tape390_kekl_pair *ext_kekls)
+{
+ struct tape_request *request;
+ struct tape3592_kekl_query_order *order;
+ struct tape3592_kekl_query_data *int_kekls;
+ int rc;
+
+ DBF_EVENT(6, "tape3592_kekl_query\n");
+ int_kekls = kmalloc(sizeof(*int_kekls), GFP_KERNEL|GFP_DMA);
+ if (!int_kekls)
+ return -ENOMEM;
+ request = tape_alloc_request(2, sizeof(*order));
+ if (IS_ERR(request)) {
+ rc = PTR_ERR(request);
+ goto fail_malloc;
+ }
+ order = request->cpdata;
+ memset(order,0,sizeof(*order));
+ order->code = 0xe2;
+ order->max_count = 2;
+ request->op = TO_KEKL_QUERY;
+ tape_ccw_cc(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
+ tape_ccw_end(request->cpaddr + 1, READ_SS_DATA, sizeof(*int_kekls),
+ int_kekls);
+ rc = tape_do_io(device, request);
+ if (rc)
+ goto fail_request;
+ int_to_ext_kekl_pair(&int_kekls->kekls, ext_kekls);
+
+ rc = 0;
+fail_request:
+ tape_free_request(request);
+fail_malloc:
+ kfree(int_kekls);
+ return rc;
+}
+
+/*
+ * IOCTL: Query KEKLs
+ */
+static int tape_3592_ioctl_kekl_query(struct tape_device *device,
+ unsigned long arg)
+{
+ int rc;
+ struct tape390_kekl_pair *ext_kekls;
+
+ DBF_EVENT(6, "tape_3592_ioctl_kekl_query\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ if (!crypt_enabled(device))
+ return -EUNATCH;
+ ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL);
+ if (!ext_kekls)
+ return -ENOMEM;
+ rc = tape_3592_kekl_query(device, ext_kekls);
+ if (rc != 0)
+ goto fail;
+ if (copy_to_user((char __user *) arg, ext_kekls, sizeof(*ext_kekls))) {
+ rc = -EFAULT;
+ goto fail;
+ }
+ rc = 0;
+fail:
+ kfree(ext_kekls);
+ return rc;
+}
+
+static int tape_3590_mttell(struct tape_device *device, int mt_count);
+
+/*
+ * Set KEKLs
+ */
+static int tape_3592_kekl_set(struct tape_device *device,
+ struct tape390_kekl_pair *ext_kekls)
+{
+ struct tape_request *request;
+ struct tape3592_kekl_set_order *order;
+
+ DBF_EVENT(6, "tape3592_kekl_set\n");
+ if (check_ext_kekl_pair(ext_kekls)) {
+ DBF_EVENT(6, "invalid kekls\n");
+ return -EINVAL;
+ }
+ if (tape_3590_mttell(device, 0) != 0)
+ return -EBADSLT;
+ request = tape_alloc_request(1, sizeof(*order));
+ if (IS_ERR(request))
+ return PTR_ERR(request);
+ order = request->cpdata;
+ memset(order, 0, sizeof(*order));
+ order->code = 0xe3;
+ order->kekls.count = 2;
+ ext_to_int_kekl(&ext_kekls->kekl[0], &order->kekls.kekl[0]);
+ ext_to_int_kekl(&ext_kekls->kekl[1], &order->kekls.kekl[1]);
+ request->op = TO_KEKL_SET;
+ tape_ccw_end(request->cpaddr, PERF_SUBSYS_FUNC, sizeof(*order), order);
+
+ return tape_do_io_free(device, request);
+}
+
+/*
+ * IOCTL: Set KEKLs
+ */
+static int tape_3592_ioctl_kekl_set(struct tape_device *device,
+ unsigned long arg)
+{
+ int rc;
+ struct tape390_kekl_pair *ext_kekls;
+
+ DBF_EVENT(6, "tape_3592_ioctl_kekl_set\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ if (!crypt_enabled(device))
+ return -EUNATCH;
+ ext_kekls = kmalloc(sizeof(*ext_kekls), GFP_KERNEL);
+ if (!ext_kekls)
+ return -ENOMEM;
+ if (copy_from_user(ext_kekls, (char __user *)arg, sizeof(*ext_kekls))) {
+ rc = -EFAULT;
+ goto out;
+ }
+ rc = tape_3592_kekl_set(device, ext_kekls);
+out:
+ kfree(ext_kekls);
+ return rc;
+}
+
+/*
+ * Enable encryption
+ */
+static int tape_3592_enable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+ char *data;
+
+ DBF_EVENT(6, "tape_3592_enable_crypt\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ request = tape_alloc_request(2, 72);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
+ data = request->cpdata;
+ memset(data,0,72);
+
+ data[0] = 0x05;
+ data[36 + 0] = 0x03;
+ data[36 + 1] = 0x03;
+ data[36 + 4] = 0x40;
+ data[36 + 6] = 0x01;
+ data[36 + 14] = 0x2f;
+ data[36 + 18] = 0xc3;
+ data[36 + 35] = 0x72;
+ request->op = TO_CRYPT_ON;
+ tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
+ tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+ return tape_do_io_free(device, request);
+}
+
+/*
+ * Disable encryption
+ */
+static int tape_3592_disable_crypt(struct tape_device *device)
+{
+ struct tape_request *request;
+ char *data;
+
+ DBF_EVENT(6, "tape_3592_disable_crypt\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ request = tape_alloc_request(2, 72);
+ if (IS_ERR(request))
+ return PTR_ERR(request);
+ data = request->cpdata;
+ memset(data,0,72);
+
+ data[0] = 0x05;
+ data[36 + 0] = 0x03;
+ data[36 + 1] = 0x03;
+ data[36 + 35] = 0x32;
+
+ request->op = TO_CRYPT_OFF;
+ tape_ccw_cc(request->cpaddr, MODE_SET_CB, 36, data);
+ tape_ccw_end(request->cpaddr + 1, MODE_SET_CB, 36, data + 36);
+
+ return tape_do_io_free(device, request);
+}
+
+/*
+ * IOCTL: Set encryption status
+ */
+static int tape_3592_ioctl_crypt_set(struct tape_device *device,
+ unsigned long arg)
+{
+ struct tape390_crypt_info info;
+
+ DBF_EVENT(6, "tape_3592_ioctl_crypt_set\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ if (copy_from_user(&info, (char __user *)arg, sizeof(info)))
+ return -EFAULT;
+ if (info.status & ~TAPE390_CRYPT_ON_MASK)
+ return -EINVAL;
+ if (info.status & TAPE390_CRYPT_ON_MASK)
+ return tape_3592_enable_crypt(device);
+ else
+ return tape_3592_disable_crypt(device);
+}
+
+static int tape_3590_sense_medium(struct tape_device *device);
+
+/*
+ * IOCTL: Query enryption status
+ */
+static int tape_3592_ioctl_crypt_query(struct tape_device *device,
+ unsigned long arg)
+{
+ DBF_EVENT(6, "tape_3592_ioctl_crypt_query\n");
+ if (!crypt_supported(device))
+ return -ENOSYS;
+ tape_3590_sense_medium(device);
+ if (copy_to_user((char __user *) arg, &TAPE_3590_CRYPT_INFO(device),
+ sizeof(TAPE_3590_CRYPT_INFO(device))))
+ return -EFAULT;
+ else
+ return 0;
+}
+
/*
* 3590 IOCTL Overload
*/
return tape_std_display(device, &disp);
}
+ case TAPE390_KEKL_SET:
+ return tape_3592_ioctl_kekl_set(device, arg);
+ case TAPE390_KEKL_QUERY:
+ return tape_3592_ioctl_kekl_query(device, arg);
+ case TAPE390_CRYPT_SET:
+ return tape_3592_ioctl_crypt_set(device, arg);
+ case TAPE390_CRYPT_QUERY:
+ return tape_3592_ioctl_crypt_query(device, arg);
default:
return -EINVAL; /* no additional ioctls */
}
case TO_READ_ATTMSG:
tape_3590_read_attmsg(p->device);
break;
+ case TO_CRYPT_ON:
+ tape_3592_enable_crypt(p->device);
+ break;
+ case TO_CRYPT_OFF:
+ tape_3592_disable_crypt(p->device);
+ break;
default:
DBF_EVENT(3, "T3590: work handler undefined for "
"operation 0x%02x\n", p->op);
}
#endif
+static void tape_3590_med_state_set(struct tape_device *device,
+ struct tape_3590_med_sense *sense)
+{
+ struct tape390_crypt_info *c_info;
+
+ c_info = &TAPE_3590_CRYPT_INFO(device);
+
+ if (sense->masst == MSENSE_UNASSOCIATED) {
+ tape_med_state_set(device, MS_UNLOADED);
+ TAPE_3590_CRYPT_INFO(device).medium_status = 0;
+ return;
+ }
+ if (sense->masst != MSENSE_ASSOCIATED_MOUNT) {
+ PRINT_ERR("Unknown medium state: %x\n", sense->masst);
+ return;
+ }
+ tape_med_state_set(device, MS_LOADED);
+ c_info->medium_status |= TAPE390_MEDIUM_LOADED_MASK;
+ if (sense->flags & MSENSE_CRYPT_MASK) {
+ PRINT_INFO("Medium is encrypted (%04x)\n", sense->flags);
+ c_info->medium_status |= TAPE390_MEDIUM_ENCRYPTED_MASK;
+ } else {
+ DBF_EVENT(6, "Medium is not encrypted %04x\n", sense->flags);
+ c_info->medium_status &= ~TAPE390_MEDIUM_ENCRYPTED_MASK;
+ }
+}
+
/*
* The done handler is called at device/channel end and wakes up the sleeping
* process
static int
tape_3590_done(struct tape_device *device, struct tape_request *request)
{
- struct tape_3590_med_sense *sense;
+ struct tape_3590_disc_data *disc_data;
DBF_EVENT(6, "%s done\n", tape_op_verbose[request->op]);
+ disc_data = device->discdata;
switch (request->op) {
case TO_BSB:
break;
case TO_RUN:
tape_med_state_set(device, MS_UNLOADED);
+ tape_3590_schedule_work(device, TO_CRYPT_OFF);
break;
case TO_MSEN:
- sense = (struct tape_3590_med_sense *) request->cpdata;
- if (sense->masst == MSENSE_UNASSOCIATED)
- tape_med_state_set(device, MS_UNLOADED);
- if (sense->masst == MSENSE_ASSOCIATED_MOUNT)
- tape_med_state_set(device, MS_LOADED);
+ tape_3590_med_state_set(device, request->cpdata);
+ break;
+ case TO_CRYPT_ON:
+ TAPE_3590_CRYPT_INFO(device).status
+ |= TAPE390_CRYPT_ON_MASK;
+ *(device->modeset_byte) |= 0x03;
+ break;
+ case TO_CRYPT_OFF:
+ TAPE_3590_CRYPT_INFO(device).status
+ &= ~TAPE390_CRYPT_ON_MASK;
+ *(device->modeset_byte) &= ~0x03;
break;
case TO_RBI: /* RBI seems to succeed even without medium loaded. */
case TO_NOP: /* Same to NOP. */
case TO_DIS:
case TO_ASSIGN:
case TO_UNASSIGN:
- break;
case TO_SIZE:
+ case TO_KEKL_SET:
+ case TO_KEKL_QUERY:
break;
}
return TAPE_IO_SUCCESS;
tape_3590_erp_long_busy(struct tape_device *device,
struct tape_request *request, struct irb *irb)
{
- /* FIXME: how about WAITING for a minute ? */
- PRINT_WARN("(%s): Device is busy! Please wait a minute!\n",
- device->cdev->dev.bus_id);
- return tape_3590_erp_basic(device, request, irb, -EBUSY);
+ DBF_EVENT(6, "Device is busy\n");
+ return TAPE_IO_LONG_BUSY;
}
/*
device->cdev->dev.bus_id, sense->mc);
}
+static int tape_3590_crypt_error(struct tape_device *device,
+ struct tape_request *request, struct irb *irb)
+{
+ u8 cu_rc, ekm_rc1;
+ u16 ekm_rc2;
+ u32 drv_rc;
+ char *bus_id, *sense;
+
+ sense = ((struct tape_3590_sense *) irb->ecw)->fmt.data;
+ bus_id = device->cdev->dev.bus_id;
+ cu_rc = sense[0];
+ drv_rc = *((u32*) &sense[5]) & 0xffffff;
+ ekm_rc1 = sense[9];
+ ekm_rc2 = *((u16*) &sense[10]);
+ if ((cu_rc == 0) && (ekm_rc2 == 0xee31))
+ /* key not defined on EKM */
+ return tape_3590_erp_basic(device, request, irb, -EKEYREJECTED);
+ if ((cu_rc == 1) || (cu_rc == 2))
+ /* No connection to EKM */
+ return tape_3590_erp_basic(device, request, irb, -ENOTCONN);
+
+ PRINT_ERR("(%s): Unable to get encryption key from EKM\n", bus_id);
+ PRINT_ERR("(%s): CU=%02X DRIVE=%06X EKM=%02X:%04X\n", bus_id, cu_rc,
+ drv_rc, ekm_rc1, ekm_rc2);
+
+ return tape_3590_erp_basic(device, request, irb, -ENOKEY);
+}
+
/*
* 3590 error Recovery routine:
* If possible, it tries to recover from the error. If this is not possible,
sense = (struct tape_3590_sense *) irb->ecw;
+ DBF_EVENT(6, "Unit Check: RQC = %x\n", sense->rc_rqc);
+
/*
* First check all RC-QRCs where we want to do something special
* - "break": basic error recovery is done
case 0x2231:
tape_3590_print_era_msg(device, irb);
return tape_3590_erp_special_interrupt(device, request, irb);
+ case 0x2240:
+ return tape_3590_crypt_error(device, request, irb);
case 0x3010:
DBF_EVENT(2, "(%08x): Backward at Beginning of Partition\n",
DBF_EVENT(2, "(%08x): Rewind Unload complete\n",
device->cdev_id);
tape_med_state_set(device, MS_UNLOADED);
+ tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, 0);
case 0x4010:
PRINT_WARN("(%s): Tape operation when medium not loaded\n",
device->cdev->dev.bus_id);
tape_med_state_set(device, MS_UNLOADED);
+ tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x4012: /* Device Long Busy */
+ /* XXX: Also use long busy handling here? */
+ DBF_EVENT(6, "(%08x): LONG BUSY\n", device->cdev_id);
tape_3590_print_era_msg(device, irb);
+ return tape_3590_erp_basic(device, request, irb, -EBUSY);
+ case 0x4014:
+ DBF_EVENT(6, "(%08x): Crypto LONG BUSY\n", device->cdev_id);
return tape_3590_erp_long_busy(device, request, irb);
case 0x5010:
case 0x5120:
case 0x1120:
tape_med_state_set(device, MS_UNLOADED);
+ tape_3590_schedule_work(device, TO_CRYPT_OFF);
return tape_3590_erp_basic(device, request, irb, -ENOMEDIUM);
case 0x6020:
{
int rc;
struct tape_3590_disc_data *data;
+ char *rdc_data;
DBF_EVENT(6, "3590 device setup\n");
- data = kmalloc(sizeof(struct tape_3590_disc_data),
- GFP_KERNEL | GFP_DMA);
+ data = kzalloc(sizeof(struct tape_3590_disc_data), GFP_KERNEL | GFP_DMA);
if (data == NULL)
return -ENOMEM;
data->read_back_op = READ_PREVIOUS;
device->discdata = data;
- if ((rc = tape_std_assign(device)) == 0) {
- /* Try to find out if medium is loaded */
- if ((rc = tape_3590_sense_medium(device)) != 0)
- DBF_LH(3, "3590 medium sense returned %d\n", rc);
+ rdc_data = kmalloc(64, GFP_KERNEL | GFP_DMA);
+ if (!rdc_data) {
+ rc = -ENOMEM;
+ goto fail_kmalloc;
+ }
+ rc = read_dev_chars(device->cdev, (void**)&rdc_data, 64);
+ if (rc) {
+ DBF_LH(3, "Read device characteristics failed!\n");
+ goto fail_kmalloc;
+ }
+ rc = tape_std_assign(device);
+ if (rc)
+ goto fail_rdc_data;
+ if (rdc_data[31] == 0x13) {
+ PRINT_INFO("Device has crypto support\n");
+ data->crypt_info.capability |= TAPE390_CRYPT_SUPPORTED_MASK;
+ tape_3592_disable_crypt(device);
+ } else {
+ DBF_EVENT(6, "Device has NO crypto support\n");
}
+ /* Try to find out if medium is loaded */
+ rc = tape_3590_sense_medium(device);
+ if (rc) {
+ DBF_LH(3, "3590 medium sense returned %d\n", rc);
+ goto fail_rdc_data;
+ }
+ return 0;
+fail_rdc_data:
+ kfree(rdc_data);
+fail_kmalloc:
+ kfree(data);
return rc;
}
* drivers/s390/char/tape_3590.h
* tape device discipline for 3590 tapes.
*
- * Copyright (C) IBM Corp. 2001,2006
+ * Copyright IBM Corp. 2001,2006
* Author(s): Stefan Bader <shbader@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
* Martin Schwidefsky <schwidefsky@de.ibm.com>
#define MSENSE_UNASSOCIATED 0x00
#define MSENSE_ASSOCIATED_MOUNT 0x01
#define MSENSE_ASSOCIATED_UMOUNT 0x02
+#define MSENSE_CRYPT_MASK 0x00000010
#define TAPE_3590_MAX_MSG 0xb0
/* Datatypes */
struct tape_3590_disc_data {
- unsigned char modeset_byte;
+ struct tape390_crypt_info crypt_info;
int read_back_op;
};
+#define TAPE_3590_CRYPT_INFO(device) \
+ ((struct tape_3590_disc_data*)(device->discdata))->crypt_info
+#define TAPE_3590_READ_BACK_OP(device) \
+ ((struct tape_3590_disc_data*)(device->discdata))->read_back_op
+
struct tape_3590_sense {
unsigned int command_rej:1;
struct tape_3590_med_sense {
unsigned int macst:4;
unsigned int masst:4;
- char pad[127];
+ char pad1[7];
+ unsigned int flags;
+ char pad2[116];
+} __attribute__ ((packed));
+
+/* Datastructures for 3592 encryption support */
+
+struct tape3592_kekl {
+ __u8 flags;
+ char label[64];
+} __attribute__ ((packed));
+
+struct tape3592_kekl_pair {
+ __u8 count;
+ struct tape3592_kekl kekl[2];
+} __attribute__ ((packed));
+
+struct tape3592_kekl_query_data {
+ __u16 len;
+ __u8 fmt;
+ __u8 mc;
+ __u32 id;
+ __u8 flags;
+ struct tape3592_kekl_pair kekls;
+ char reserved[116];
+} __attribute__ ((packed));
+
+struct tape3592_kekl_query_order {
+ __u8 code;
+ __u8 flags;
+ char reserved1[2];
+ __u8 max_count;
+ char reserved2[35];
+} __attribute__ ((packed));
+
+struct tape3592_kekl_set_order {
+ __u8 code;
+ __u8 flags;
+ char reserved1[2];
+ __u8 op;
+ struct tape3592_kekl_pair kekls;
+ char reserved2[120];
} __attribute__ ((packed));
#endif /* _TAPE_3590_H */
/*
* Post finished request.
*/
-static inline void
+static void
tapeblock_end_request(struct request *req, int uptodate)
{
if (end_that_request_first(req, uptodate, req->hard_nr_sectors))
/*
* Feed the tape device CCW queue with requests supplied in a list.
*/
-static inline int
+static int
tapeblock_start_request(struct tape_device *device, struct request *req)
{
struct tape_request * ccw_req;
* character device frontend for tape device driver
*
* S390 and zSeries version
- * Copyright (C) 2001,2002 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2001,2006
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
* Tuan Ngo-Anh <ngoanh@de.ibm.com>
device->nt = NULL;
}
-/*
- * Terminate write command (we write two TMs and skip backward over last)
- * This ensures that the tape is always correctly terminated.
- * When the user writes afterwards a new file, he will overwrite the
- * second TM and therefore one TM will remain to separate the
- * two files on the tape...
- */
-static inline void
-tapechar_terminate_write(struct tape_device *device)
-{
- if (tape_mtop(device, MTWEOF, 1) == 0 &&
- tape_mtop(device, MTWEOF, 1) == 0)
- tape_mtop(device, MTBSR, 1);
-}
-
-static inline int
+static int
tapechar_check_idalbuffer(struct tape_device *device, size_t block_size)
{
struct idal_buffer *new;
/*
* Tape device read function
*/
-ssize_t
+static ssize_t
tapechar_read(struct file *filp, char __user *data, size_t count, loff_t *ppos)
{
struct tape_device *device;
/*
* Tape device write function
*/
-ssize_t
+static ssize_t
tapechar_write(struct file *filp, const char __user *data, size_t count, loff_t *ppos)
{
struct tape_device *device;
/*
* Character frontend tape device open function.
*/
-int
+static int
tapechar_open (struct inode *inode, struct file *filp)
{
struct tape_device *device;
* Character frontend tape device release function.
*/
-int
+static int
tapechar_release(struct inode *inode, struct file *filp)
{
struct tape_device *device;
* basic function of the tape device driver
*
* S390 and zSeries version
- * Copyright (C) 2001,2005 IBM Deutschland Entwicklung GmbH, IBM Corporation
+ * Copyright IBM Corp. 2001,2006
* Author(s): Carsten Otte <cotte@de.ibm.com>
* Michael Holzheu <holzheu@de.ibm.com>
* Tuan Ngo-Anh <ngoanh@de.ibm.com>
#include "tape_std.h"
#define PRINTK_HEADER "TAPE_CORE: "
+#define LONG_BUSY_TIMEOUT 180 /* seconds */
static void __tape_do_irq (struct ccw_device *, unsigned long, struct irb *);
static void tape_delayed_next_request(struct work_struct *);
+static void tape_long_busy_timeout(unsigned long data);
/*
* One list to contain all tape devices of all disciplines, so
[TO_LOAD] = "LOA", [TO_READ_CONFIG] = "RCF",
[TO_READ_ATTMSG] = "RAT",
[TO_DIS] = "DIS", [TO_ASSIGN] = "ASS",
- [TO_UNASSIGN] = "UAS"
+ [TO_UNASSIGN] = "UAS", [TO_CRYPT_ON] = "CON",
+ [TO_CRYPT_OFF] = "COF", [TO_KEKL_SET] = "KLS",
+ [TO_KEKL_QUERY] = "KLQ",
};
-static inline int
+static int
busid_to_int(char *bus_id)
{
int dec;
/*
* Stop running ccw. Has to be called with the device lock held.
*/
-static inline int
+static int
__tape_cancel_io(struct tape_device *device, struct tape_request *request)
{
int retries;
return -EINVAL;
}
+ init_timer(&device->lb_timeout);
+ device->lb_timeout.function = tape_long_busy_timeout;
+
/* Let the discipline have a go at the device. */
device->discipline = discipline;
if (!try_module_get(discipline->owner)) {
return rc;
}
-static inline void
+static void
tape_cleanup_device(struct tape_device *device)
{
tapeblock_cleanup_device(device);
return ret;
}
-static inline void
+static void
__tape_discard_requests(struct tape_device *device)
{
struct tape_request * request;
kfree(request);
}
-static inline int
+static int
__tape_start_io(struct tape_device *device, struct tape_request *request)
{
int rc;
return rc;
}
-static inline void
+static void
__tape_start_next_request(struct tape_device *device)
{
struct list_head *l, *n;
spin_unlock_irq(get_ccwdev_lock(device->cdev));
}
-static inline void
+static void tape_long_busy_timeout(unsigned long data)
+{
+ struct tape_request *request;
+ struct tape_device *device;
+
+ device = (struct tape_device *) data;
+ spin_lock_irq(get_ccwdev_lock(device->cdev));
+ request = list_entry(device->req_queue.next, struct tape_request, list);
+ if (request->status != TAPE_REQUEST_LONG_BUSY)
+ BUG();
+ DBF_LH(6, "%08x: Long busy timeout.\n", device->cdev_id);
+ __tape_start_next_request(device);
+ device->lb_timeout.data = (unsigned long) tape_put_device(device);
+ spin_unlock_irq(get_ccwdev_lock(device->cdev));
+}
+
+static void
__tape_end_request(
struct tape_device * device,
struct tape_request * request,
* and starts it if the tape is idle. Has to be called with
* the device lock held.
*/
-static inline int
+static int
__tape_start_request(struct tape_device *device, struct tape_request *request)
{
int rc;
/* May be an unsolicited irq */
if(request != NULL)
request->rescnt = irb->scsw.count;
-
+ else if ((irb->scsw.dstat == 0x85 || irb->scsw.dstat == 0x80) &&
+ !list_empty(&device->req_queue)) {
+ /* Not Ready to Ready after long busy ? */
+ struct tape_request *req;
+ req = list_entry(device->req_queue.next,
+ struct tape_request, list);
+ if (req->status == TAPE_REQUEST_LONG_BUSY) {
+ DBF_EVENT(3, "(%08x): del timer\n", device->cdev_id);
+ if (del_timer(&device->lb_timeout)) {
+ device->lb_timeout.data = (unsigned long)
+ tape_put_device(device);
+ __tape_start_next_request(device);
+ }
+ return;
+ }
+ }
if (irb->scsw.dstat != 0x0c) {
/* Set the 'ONLINE' flag depending on sense byte 1 */
if(*(((__u8 *) irb->ecw) + 1) & SENSE_DRIVE_ONLINE)
break;
case TAPE_IO_PENDING:
break;
+ case TAPE_IO_LONG_BUSY:
+ device->lb_timeout.data =
+ (unsigned long)tape_get_device_reference(device);
+ device->lb_timeout.expires = jiffies +
+ LONG_BUSY_TIMEOUT * HZ;
+ DBF_EVENT(3, "(%08x): add timer\n", device->cdev_id);
+ add_timer(&device->lb_timeout);
+ request->status = TAPE_REQUEST_LONG_BUSY;
+ break;
case TAPE_IO_RETRY:
rc = __tape_start_io(device, request);
if (rc)
struct tty_driver *tty3270_driver;
static int tty3270_max_index;
-struct raw3270_fn tty3270_fn;
+static struct raw3270_fn tty3270_fn;
struct tty3270_cell {
unsigned char character;
/*
* Setup timeout for a device. On timeout trigger an update.
*/
-void
-tty3270_set_timer(struct tty3270 *tp, int expires)
+static void tty3270_set_timer(struct tty3270 *tp, int expires)
{
if (expires == 0) {
if (timer_pending(&tp->timer) && del_timer(&tp->timer))
}
}
-struct raw3270_fn tty3270_fn = {
+static struct raw3270_fn tty3270_fn = {
.activate = tty3270_activate,
.deactivate = tty3270_deactivate,
.intv = (void *) tty3270_irq,
.set_termios = tty3270_set_termios
};
-void
-tty3270_notifier(int index, int active)
+static void tty3270_notifier(int index, int active)
{
if (active)
tty_register_device(tty3270_driver, index, NULL);
* 3270 tty registration code called from tty_init().
* Most kernel services (incl. kmalloc) are available at this poimt.
*/
-int __init
-tty3270_init(void)
+static int __init tty3270_init(void)
{
struct tty_driver *driver;
int ret;
.MessagePending = vmlogrdr_iucv_MessagePending,
};
-
-DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue);
-DECLARE_WAIT_QUEUE_HEAD(read_wait_queue);
+static DECLARE_WAIT_QUEUE_HEAD(conn_wait_queue);
+static DECLARE_WAIT_QUEUE_HEAD(read_wait_queue);
/*
* pointer to system service private structure
* Function: blacklist_range
* (Un-)blacklist the devices from-to
*/
-static inline void
+static void
blacklist_range (range_action action, unsigned int from, unsigned int to,
unsigned int ssid)
{
* Get devno/busid from given string.
* Shamelessly grabbed from dasd_devmap.c.
*/
-static inline int
+static int
blacklist_busid(char **str, int *id0, int *ssid, int *devno)
{
int val, old_style;
return 1;
}
-static inline int
+static int
blacklist_parse_parameters (char *str, range_action action)
{
- unsigned int from, to, from_id0, to_id0, from_ssid, to_ssid;
+ int from, to, from_id0, to_id0, from_ssid, to_ssid;
while (*str != 0 && *str != '\n') {
range_action ra = action;
* Function: blacklist_parse_proc_parameters
* parse the stuff which is piped to /proc/cio_ignore
*/
-static inline void
+static void
blacklist_parse_proc_parameters (char *buf)
{
if (strncmp (buf, "free ", 5) == 0) {
static struct bus_type ccwgroup_bus_type;
-static inline void
+static void
__ccwgroup_remove_symlinks(struct ccwgroup_device *gdev)
{
int i;
kfree(gdev);
}
-static inline int
+static int
__ccwgroup_create_symlinks(struct ccwgroup_device *gdev)
{
char str[8];
return 0;
}
-static inline struct ccwgroup_device *
+static struct ccwgroup_device *
__ccwgroup_get_gdev_by_cdev(struct ccw_device *cdev)
{
struct ccwgroup_device *gdev;
u16 sch; /* subchannel */
u8 chpid[8]; /* chpids 0-7 */
u16 fla[8]; /* full link addresses 0-7 */
- } *ssd_area;
+ } __attribute__ ((packed)) *ssd_area;
ssd_area = page;
return 0;
}
-static inline void
+static void
s390_set_chpid_offline( __u8 chpid)
{
char dbf_txt[15];
return 0x80 >> chp;
}
-static inline int
+static int
s390_process_res_acc_new_sch(struct subchannel_id schid)
{
struct schib schib;
u32 andesc[28];
/* incident-specific information */
u32 isinfo[28];
- } *lir;
+ } __attribute__ ((packed)) *lir;
lir = data;
if (!(lir->iq&0x80))
return (u16) (lir->indesc[0]&0x000000ff);
}
-int
-chsc_process_crw(void)
+struct chsc_sei_area {
+ struct chsc_header request;
+ u32 reserved1;
+ u32 reserved2;
+ u32 reserved3;
+ struct chsc_header response;
+ u32 reserved4;
+ u8 flags;
+ u8 vf; /* validity flags */
+ u8 rs; /* reporting source */
+ u8 cc; /* content code */
+ u16 fla; /* full link address */
+ u16 rsid; /* reporting source id */
+ u32 reserved5;
+ u32 reserved6;
+ u8 ccdf[4096 - 16 - 24]; /* content-code dependent field */
+ /* ccdf has to be big enough for a link-incident record */
+} __attribute__ ((packed));
+
+static int chsc_process_sei_link_incident(struct chsc_sei_area *sei_area)
+{
+ int chpid;
+
+ CIO_CRW_EVENT(4, "chsc: link incident (rs=%02x, rs_id=%04x)\n",
+ sei_area->rs, sei_area->rsid);
+ if (sei_area->rs != 4)
+ return 0;
+ chpid = __get_chpid_from_lir(sei_area->ccdf);
+ if (chpid < 0)
+ CIO_CRW_EVENT(4, "chsc: link incident - invalid LIR\n");
+ else
+ s390_set_chpid_offline(chpid);
+
+ return 0;
+}
+
+static int chsc_process_sei_res_acc(struct chsc_sei_area *sei_area)
{
- int chpid, ret;
struct res_acc_data res_data;
- struct {
- struct chsc_header request;
- u32 reserved1;
- u32 reserved2;
- u32 reserved3;
- struct chsc_header response;
- u32 reserved4;
- u8 flags;
- u8 vf; /* validity flags */
- u8 rs; /* reporting source */
- u8 cc; /* content code */
- u16 fla; /* full link address */
- u16 rsid; /* reporting source id */
- u32 reserved5;
- u32 reserved6;
- u32 ccdf[96]; /* content-code dependent field */
- /* ccdf has to be big enough for a link-incident record */
- } *sei_area;
+ struct device *dev;
+ int status;
+ int rc;
+
+ CIO_CRW_EVENT(4, "chsc: resource accessibility event (rs=%02x, "
+ "rs_id=%04x)\n", sei_area->rs, sei_area->rsid);
+ if (sei_area->rs != 4)
+ return 0;
+ /* allocate a new channel path structure, if needed */
+ status = get_chp_status(sei_area->rsid);
+ if (status < 0)
+ new_channel_path(sei_area->rsid);
+ else if (!status)
+ return 0;
+ dev = get_device(&css[0]->chps[sei_area->rsid]->dev);
+ memset(&res_data, 0, sizeof(struct res_acc_data));
+ res_data.chp = to_channelpath(dev);
+ if ((sei_area->vf & 0xc0) != 0) {
+ res_data.fla = sei_area->fla;
+ if ((sei_area->vf & 0xc0) == 0xc0)
+ /* full link address */
+ res_data.fla_mask = 0xffff;
+ else
+ /* link address */
+ res_data.fla_mask = 0xff00;
+ }
+ rc = s390_process_res_acc(&res_data);
+ put_device(dev);
+
+ return rc;
+}
+
+static int chsc_process_sei(struct chsc_sei_area *sei_area)
+{
+ int rc;
+
+ /* Check if we might have lost some information. */
+ if (sei_area->flags & 0x40)
+ CIO_CRW_EVENT(2, "chsc: event overflow\n");
+ /* which kind of information was stored? */
+ rc = 0;
+ switch (sei_area->cc) {
+ case 1: /* link incident*/
+ rc = chsc_process_sei_link_incident(sei_area);
+ break;
+ case 2: /* i/o resource accessibiliy */
+ rc = chsc_process_sei_res_acc(sei_area);
+ break;
+ default: /* other stuff */
+ CIO_CRW_EVENT(4, "chsc: unhandled sei content code %d\n",
+ sei_area->cc);
+ break;
+ }
+
+ return rc;
+}
+
+int chsc_process_crw(void)
+{
+ struct chsc_sei_area *sei_area;
+ int ret;
+ int rc;
if (!sei_page)
return 0;
- /*
- * build the chsc request block for store event information
- * and do the call
- * This function is only called by the machine check handler thread,
- * so we don't need locking for the sei_page.
- */
+ /* Access to sei_page is serialized through machine check handler
+ * thread, so no need for locking. */
sei_area = sei_page;
CIO_TRACE_EVENT( 2, "prcss");
ret = 0;
do {
- int ccode, status;
- struct device *dev;
memset(sei_area, 0, sizeof(*sei_area));
- memset(&res_data, 0, sizeof(struct res_acc_data));
sei_area->request.length = 0x0010;
sei_area->request.code = 0x000e;
+ if (chsc(sei_area))
+ break;
- ccode = chsc(sei_area);
- if (ccode > 0)
- return 0;
-
- switch (sei_area->response.code) {
- /* for debug purposes, check for problems */
- case 0x0001:
- CIO_CRW_EVENT(4, "chsc_process_crw: event information "
- "successfully stored\n");
- break; /* everything ok */
- case 0x0002:
- CIO_CRW_EVENT(2,
- "chsc_process_crw: invalid command!\n");
- return 0;
- case 0x0003:
- CIO_CRW_EVENT(2, "chsc_process_crw: error in chsc "
- "request block!\n");
- return 0;
- case 0x0005:
- CIO_CRW_EVENT(2, "chsc_process_crw: no event "
- "information stored\n");
- return 0;
- default:
- CIO_CRW_EVENT(2, "chsc_process_crw: chsc response %d\n",
+ if (sei_area->response.code == 0x0001) {
+ CIO_CRW_EVENT(4, "chsc: sei successful\n");
+ rc = chsc_process_sei(sei_area);
+ if (rc)
+ ret = rc;
+ } else {
+ CIO_CRW_EVENT(2, "chsc: sei failed (rc=%04x)\n",
sei_area->response.code);
- return 0;
- }
-
- /* Check if we might have lost some information. */
- if (sei_area->flags & 0x40)
- CIO_CRW_EVENT(2, "chsc_process_crw: Event information "
- "has been lost due to overflow!\n");
-
- if (sei_area->rs != 4) {
- CIO_CRW_EVENT(2, "chsc_process_crw: reporting source "
- "(%04X) isn't a chpid!\n",
- sei_area->rsid);
- continue;
- }
-
- /* which kind of information was stored? */
- switch (sei_area->cc) {
- case 1: /* link incident*/
- CIO_CRW_EVENT(4, "chsc_process_crw: "
- "channel subsystem reports link incident,"
- " reporting source is chpid %x\n",
- sei_area->rsid);
- chpid = __get_chpid_from_lir(sei_area->ccdf);
- if (chpid < 0)
- CIO_CRW_EVENT(4, "%s: Invalid LIR, skipping\n",
- __FUNCTION__);
- else
- s390_set_chpid_offline(chpid);
- break;
-
- case 2: /* i/o resource accessibiliy */
- CIO_CRW_EVENT(4, "chsc_process_crw: "
- "channel subsystem reports some I/O "
- "devices may have become accessible\n");
- pr_debug("Data received after sei: \n");
- pr_debug("Validity flags: %x\n", sei_area->vf);
-
- /* allocate a new channel path structure, if needed */
- status = get_chp_status(sei_area->rsid);
- if (status < 0)
- new_channel_path(sei_area->rsid);
- else if (!status)
- break;
- dev = get_device(&css[0]->chps[sei_area->rsid]->dev);
- res_data.chp = to_channelpath(dev);
- pr_debug("chpid: %x", sei_area->rsid);
- if ((sei_area->vf & 0xc0) != 0) {
- res_data.fla = sei_area->fla;
- if ((sei_area->vf & 0xc0) == 0xc0) {
- pr_debug(" full link addr: %x",
- sei_area->fla);
- res_data.fla_mask = 0xffff;
- } else {
- pr_debug(" link addr: %x",
- sei_area->fla);
- res_data.fla_mask = 0xff00;
- }
- }
- ret = s390_process_res_acc(&res_data);
- pr_debug("\n\n");
- put_device(dev);
- break;
-
- default: /* other stuff */
- CIO_CRW_EVENT(4, "chsc_process_crw: event %d\n",
- sei_area->cc);
+ ret = 0;
break;
}
} while (sei_area->flags & 0x80);
+
return ret;
}
-static inline int
+static int
__chp_add_new_sch(struct subchannel_id schid)
{
struct schib schib;
int ret;
- if (stsch(schid, &schib))
+ if (stsch_err(schid, &schib))
/* We're through */
return need_rescan ? -EAGAIN : -ENXIO;
return chp_add(chpid);
}
-static inline int check_for_io_on_path(struct subchannel *sch, int index)
+static int check_for_io_on_path(struct subchannel *sch, int index)
{
int cc;
sch->driver->termination(&sch->dev);
}
-static inline void
+static void
__s390_subchannel_vary_chpid(struct subchannel *sch, __u8 chpid, int on)
{
int chp, old_lpm;
static void
chsc_remove_chp_cmg_attr(struct channel_path *chp)
{
- sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_chars_attr);
- sysfs_remove_bin_file(&chp->dev.kobj, &chp_measurement_attr);
+ device_remove_bin_file(&chp->dev, &chp_measurement_chars_attr);
+ device_remove_bin_file(&chp->dev, &chp_measurement_attr);
}
static int
{
int ret;
- ret = sysfs_create_bin_file(&chp->dev.kobj,
- &chp_measurement_chars_attr);
+ ret = device_create_bin_file(&chp->dev, &chp_measurement_chars_attr);
if (ret)
return ret;
- ret = sysfs_create_bin_file(&chp->dev.kobj, &chp_measurement_attr);
+ ret = device_create_bin_file(&chp->dev, &chp_measurement_attr);
if (ret)
- sysfs_remove_bin_file(&chp->dev.kobj,
- &chp_measurement_chars_attr);
+ device_remove_bin_file(&chp->dev, &chp_measurement_chars_attr);
return ret;
}
u32 : 4;
u32 fmt : 4;
u32 : 16;
- } *secm_area;
+ } __attribute__ ((packed)) *secm_area;
int ret, ccode;
secm_area = page;
struct chsc_header response;
u32 zeroes2;
struct channel_path_desc desc;
- } *scpd_area;
+ } __attribute__ ((packed)) *scpd_area;
scpd_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!scpd_area)
u32 cmg : 8;
u32 zeroes3;
u32 data[NR_MEASUREMENT_CHARS];
- } *scmc_area;
+ } __attribute__ ((packed)) *scmc_area;
scmc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!scmc_area)
u32 reserved5:4;
u32 format2:4;
u32 reserved6:24;
- } *sda_area;
+ } __attribute__ ((packed)) *sda_area;
sda_area = (void *)get_zeroed_page(GFP_KERNEL|GFP_DMA);
if (!sda_area)
u32 reserved4;
u32 general_char[510];
u32 chsc_char[518];
- } *scsc_area;
+ } __attribute__ ((packed)) *scsc_area;
scsc_area = (void *)get_zeroed_page(GFP_KERNEL | GFP_DMA);
if (!scsc_area) {
struct chsc_header {
u16 length;
u16 code;
-};
+} __attribute__ ((packed));
#define NR_MEASUREMENT_CHARS 5
struct cmg_chars {
u32 values[NR_MEASUREMENT_CHARS];
-};
+} __attribute__ ((packed));
#define NR_MEASUREMENT_ENTRIES 8
struct cmg_entry {
u32 values[NR_MEASUREMENT_ENTRIES];
-};
+} __attribute__ ((packed));
struct channel_path_desc {
u8 flags;
u8 zeroes;
u8 chla;
u8 chpp;
-};
+} __attribute__ ((packed));
struct channel_path {
int id;
extern void s390_process_css( void );
extern void chsc_validate_chpids(struct subchannel *);
extern void chpid_is_actually_online(int);
+extern int css_get_ssd_info(struct subchannel *);
+extern int chsc_process_crw(void);
+extern int chp_process_crw(int, int);
struct css_general_char {
u64 : 41;
* Use tpi to get a pending interrupt, call the interrupt handler and
* return a pointer to the subchannel structure.
*/
-static inline int
+static int
cio_tpi(void)
{
struct tpi_info *tpi_info;
return 1;
}
-static inline int
+static int
cio_start_handle_notoper(struct subchannel *sch, __u8 lpm)
{
char dbf_text[15];
* This device must not be known to Linux. So we simply
* say that there is no device and return ENODEV.
*/
- CIO_MSG_EVENT(0, "Blacklisted device detected "
+ CIO_MSG_EVENT(4, "Blacklisted device detected "
"at devno %04X, subchannel set %x\n",
sch->schib.pmcw.dev, sch->schid.ssid);
err = -ENODEV;
* Make sure that the i/o interrupt did not "overtake"
* the last HZ timer interrupt.
*/
- account_ticks();
+ account_ticks(S390_lowcore.int_clock);
/*
* Get interrupt information from lowcore
*/
}
#endif
-static inline int
+static int
__disable_subchannel_easy(struct subchannel_id schid, struct schib *schib)
{
int retry, cc;
return -EBUSY; /* uhm... */
}
-static inline int
+/* we can't use the normal udelay here, since it enables external interrupts */
+
+static void udelay_reset(unsigned long usecs)
+{
+ uint64_t start_cc, end_cc;
+
+ asm volatile ("STCK %0" : "=m" (start_cc));
+ do {
+ cpu_relax();
+ asm volatile ("STCK %0" : "=m" (end_cc));
+ } while (((end_cc - start_cc)/4096) < usecs);
+}
+
+static int
__clear_subchannel_easy(struct subchannel_id schid)
{
int retry;
if (schid_equal(&ti.schid, &schid))
return 0;
}
- udelay(100);
+ udelay_reset(100);
}
return -EBUSY;
}
int rc;
pgm_check_occured = 0;
- s390_reset_pgm_handler = cio_reset_pgm_check_handler;
+ s390_base_pgm_handler_fn = cio_reset_pgm_check_handler;
rc = stsch(schid, addr);
- s390_reset_pgm_handler = NULL;
+ s390_base_pgm_handler_fn = NULL;
- /* The program check handler could have changed pgm_check_occured */
+ /* The program check handler could have changed pgm_check_occured. */
barrier();
if (pgm_check_occured)
/* Reset subchannels. */
for_each_subchannel(__shutdown_subchannel_easy, NULL);
/* Reset channel paths. */
- s390_reset_mcck_handler = s390_reset_chpids_mcck_handler;
+ s390_base_mcck_handler_fn = s390_reset_chpids_mcck_handler;
/* Enable channel report machine checks. */
__ctl_set_bit(14, 28);
/* Temporarily reenable machine checks. */
local_mcck_disable();
/* Disable channel report machine checks. */
__ctl_clear_bit(14, 28);
- s390_reset_mcck_handler = NULL;
+ s390_base_mcck_handler_fn = NULL;
}
static struct reset_call css_reset_call = {
/* insert a single device into the cmb_area list
* called with cmb_area.lock held from alloc_cmb
*/
-static inline int alloc_cmb_single (struct ccw_device *cdev,
- struct cmb_data *cmb_data)
+static int alloc_cmb_single(struct ccw_device *cdev,
+ struct cmb_data *cmb_data)
{
struct cmb *cmb;
struct ccw_device_private *node;
int css_characteristics_avail = 0;
-inline int
+int
for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *data)
{
struct subchannel_id schid;
}
}
-extern int css_get_ssd_info(struct subchannel *sch);
-
-
int css_sch_device_register(struct subchannel *sch)
{
int ret;
return dev ? to_subchannel(dev) : NULL;
}
-static inline int css_get_subchannel_status(struct subchannel *sch)
+static int css_get_subchannel_status(struct subchannel *sch)
{
struct schib schib;
/* Will be done on the slow path. */
return -EAGAIN;
}
- if (stsch(schid, &schib) || !schib.pmcw.dnv) {
+ if (stsch_err(schid, &schib) || !schib.pmcw.dnv) {
/* Unusable - ignore. */
return 0;
}
need_reprobe);
}
-DECLARE_WORK(css_reprobe_work, reprobe_all);
+static DECLARE_WORK(css_reprobe_work, reprobe_all);
/* Schedule reprobing of all unregistered subchannels. */
void css_schedule_reprobe(void)
static DEVICE_ATTR(cm_enable, 0644, css_cm_enable_show, css_cm_enable_store);
-static inline int __init setup_css(int nr)
+static int __init setup_css(int nr)
{
u32 tod_high;
int ret;
extern struct subchannel * get_subchannel_by_schid(struct subchannel_id);
extern int css_init_done;
extern int for_each_subchannel(int(*fn)(struct subchannel_id, void *), void *);
+extern int css_process_crw(int, int);
+extern void css_reiterate_subchannels(void);
#define __MAX_SUBCHANNEL 65535
#define __MAX_SSID 3
static int io_subchannel_probe (struct subchannel *);
static int io_subchannel_remove (struct subchannel *);
-void io_subchannel_irq (struct device *);
static int io_subchannel_notify(struct device *, int);
static void io_subchannel_verify(struct device *);
static void io_subchannel_ioterm(struct device *);
ssize_t ret = 0;
int chp;
- if (ssd)
- for (chp = 0; chp < 8; chp++)
- ret += sprintf (buf+ret, "%02x ", ssd->chpid[chp]);
- else
- ret += sprintf (buf, "n/a");
+ for (chp = 0; chp < 8; chp++)
+ ret += sprintf (buf+ret, "%02x ", ssd->chpid[chp]);
ret += sprintf (buf+ret, "\n");
return min((ssize_t)PAGE_SIZE, ret);
}
.attrs = ccwdev_attrs,
};
-static inline int
+static int
device_add_files (struct device *dev)
{
return sysfs_create_group(&dev->kobj, &ccwdev_attr_group);
}
-static inline void
+static void
device_remove_files(struct device *dev)
{
sysfs_remove_group(&dev->kobj, &ccwdev_attr_group);
extern wait_queue_head_t ccw_device_init_wq;
extern atomic_t ccw_device_init_count;
+void io_subchannel_irq (struct device *pdev);
void io_subchannel_recog_done(struct ccw_device *cdev);
int ccw_device_cancel_halt_clear(struct ccw_device *);
/* qdio needs this. */
void ccw_device_set_timeout(struct ccw_device *, int);
extern struct subchannel_id ccw_device_get_subchannel_id(struct ccw_device *);
+extern struct bus_type ccw_bus_type;
/* Channel measurement facility related */
void retry_set_schib(struct ccw_device *cdev);
* been varied online on the SE so we have to find out by magic (i. e. driving
* the channel subsystem to device selection and updating our path masks).
*/
-static inline void
+static void
__recover_lost_chpids(struct subchannel *sch, int old_lpm)
{
int mask, i;
put_device (&cdev->dev);
}
-static inline int cmp_pgid(struct pgid *p1, struct pgid *p2)
+static int cmp_pgid(struct pgid *p1, struct pgid *p2)
{
char *c1;
char *c2;
call_handler_unsol:
if (cdev->handler)
cdev->handler (cdev, 0, irb);
+ if (cdev->private->flags.doverify)
+ ccw_device_online_verify(cdev, 0);
return;
}
/* Accumulate status and find out if a basic sense is needed. */
/*
* Got an interrupt for a basic sense.
*/
-void
+static void
ccw_device_w4sense(struct ccw_device *cdev, enum dev_event dev_event)
{
struct irb *irb;
wake_up(&cdev->private->wait_q);
}
-static inline int
+static int
__ccw_device_retry_loop(struct ccw_device *cdev, struct ccw1 *ccw, long magic, __u8 lpm)
{
int ret;
* Check for any kind of channel or interface control check but don't
* issue the message for the console device
*/
-static inline void
+static void
ccw_device_msg_control_check(struct ccw_device *cdev, struct irb *irb)
{
if (!(irb->scsw.cstat & (SCHN_STAT_CHN_DATA_CHK |
/*
* Copy valid bits from the extended control word to device irb.
*/
-static inline void
+static void
ccw_device_accumulate_ecw(struct ccw_device *cdev, struct irb *irb)
{
/*
/*
* Check if extended status word is valid.
*/
-static inline int
+static int
ccw_device_accumulate_esw_valid(struct irb *irb)
{
if (!irb->scsw.eswf && irb->scsw.stctl == SCSW_STCTL_STATUS_PEND)
/*
* Copy valid bits from the extended status word to device irb.
*/
-static inline void
+static void
ccw_device_accumulate_esw(struct ccw_device *cdev, struct irb *irb)
{
struct irb *cdev_irb;
/******************** HERE WE GO ***********************************/
static const char version[] = "QDIO base support version 2";
-extern struct bus_type ccw_bus_type;
static int qdio_performance_stats = 0;
static int proc_perf_file_registration;
}
/*check ccq */
-static inline int
+static int
qdio_check_ccq(struct qdio_q *q, unsigned int ccq)
{
char dbf_text[15];
return -EIO;
}
/* EQBS: extract buffer states */
-static inline int
+static int
qdio_do_eqbs(struct qdio_q *q, unsigned char *state,
unsigned int *start, unsigned int *cnt)
{
}
/* SQBS: set buffer states */
-static inline int
+static int
qdio_do_sqbs(struct qdio_q *q, unsigned char state,
unsigned int *start, unsigned int *cnt)
{
* returns QDIO_SIGA_ERROR_ACCESS_EXCEPTION as cc, when SIGA returns
* an access exception
*/
-static inline int
+static int
qdio_siga_output(struct qdio_q *q)
{
int cc;
return cc;
}
-static inline int
+static int
qdio_siga_input(struct qdio_q *q)
{
int cc;
tasklet_hi_schedule(&tiqdio_tasklet);
}
-static inline void
+static void
qdio_mark_tiq(struct qdio_q *q)
{
unsigned long flags;
tasklet_schedule(&q->tasklet);
}
-static inline int
+static int
qdio_stop_polling(struct qdio_q *q)
{
#ifdef QDIO_USE_PROCESSING_STATE
* sophisticated locking outside of unmark_q, so that we don't need to
* disable the interrupts :-)
*/
-static inline void
+static void
qdio_unmark_q(struct qdio_q *q)
{
unsigned long flags;
return q->first_to_check;
}
-static inline int
+static int
qdio_get_outbound_buffer_frontier(struct qdio_q *q)
{
struct qdio_irq *irq;
}
/* all buffers are processed */
-static inline int
+static int
qdio_is_outbound_q_done(struct qdio_q *q)
{
int no_used;
return (no_used==0);
}
-static inline int
+static int
qdio_has_outbound_q_moved(struct qdio_q *q)
{
int i;
}
}
-static inline void
+static void
qdio_kick_outbound_q(struct qdio_q *q)
{
int result;
}
}
-static inline void
+static void
qdio_kick_outbound_handler(struct qdio_q *q)
{
int start, end, real_end, count;
q->error_status_flags=0;
}
-static inline void
+static void
__qdio_outbound_processing(struct qdio_q *q)
{
int siga_attempts;
/************************* INBOUND ROUTINES *******************************/
-static inline int
+static int
qdio_get_inbound_buffer_frontier(struct qdio_q *q)
{
struct qdio_irq *irq;
return q->first_to_check;
}
-static inline int
+static int
qdio_has_inbound_q_moved(struct qdio_q *q)
{
int i;
}
/* means, no more buffers to be filled */
-static inline int
+static int
tiqdio_is_inbound_q_done(struct qdio_q *q)
{
int no_used;
return 0;
}
-static inline int
+static int
qdio_is_inbound_q_done(struct qdio_q *q)
{
int no_used;
}
}
-static inline void
+static void
qdio_kick_inbound_handler(struct qdio_q *q)
{
int count, start, end, real_end, i;
}
}
-static inline void
+static void
__tiqdio_inbound_processing(struct qdio_q *q, int spare_ind_was_set)
{
struct qdio_irq *irq_ptr;
__tiqdio_inbound_processing(q, atomic_read(&spare_indicator_usecount));
}
-static inline void
+static void
__qdio_inbound_processing(struct qdio_q *q)
{
int q_laps=0;
/************************* MAIN ROUTINES *******************************/
#ifdef QDIO_USE_PROCESSING_STATE
-static inline int
+static int
tiqdio_reset_processing_state(struct qdio_q *q, int q_laps)
{
if (!q) {
}
#endif /* QDIO_USE_PROCESSING_STATE */
-static inline void
+static void
tiqdio_inbound_checks(void)
{
struct qdio_q *q;
mb();
}
-static inline void
+static void
qdio_irq_check_sense(struct subchannel_id schid, struct irb *irb)
{
char dbf_text[15];
}
-static inline void
+static void
qdio_handle_pci(struct qdio_irq *irq_ptr)
{
int i;
static void qdio_establish_handle_irq(struct ccw_device*, int, int);
-static inline void
+static void
qdio_handle_activate_check(struct ccw_device *cdev, unsigned long intparm,
int cstat, int dstat)
{
return cc;
}
-static inline void
+static void
qdio_check_subchannel_qebsm(struct qdio_irq *irq_ptr, unsigned char qdioac,
unsigned long token)
{
return 0;
}
-static inline void
+static void
qdio_allocate_do_dbf(struct qdio_initialize *init_data)
{
char dbf_text[20]; /* if a printf printed out more than 8 chars */
QDIO_DBF_HEX0(0,setup,&init_data->output_sbal_addr_array,sizeof(void*));
}
-static inline void
+static void
qdio_allocate_fill_input_desc(struct qdio_irq *irq_ptr, int i, int iqfmt)
{
irq_ptr->input_qs[i]->is_iqdio_q = iqfmt;
irq_ptr->qdr->qdf0[i].dkey=QDIO_STORAGE_KEY;
}
-static inline void
+static void
qdio_allocate_fill_output_desc(struct qdio_irq *irq_ptr, int i,
int j, int iqfmt)
{
}
-static inline void
+static void
qdio_initialize_set_siga_flags_input(struct qdio_irq *irq_ptr)
{
int i;
}
}
-static inline void
+static void
qdio_initialize_set_siga_flags_output(struct qdio_irq *irq_ptr)
{
int i;
}
}
-static inline int
+static int
qdio_establish_irq_check_for_errors(struct ccw_device *cdev, int cstat,
int dstat)
{
return 0;
}
-int qdio_fill_irq(struct qdio_initialize *init_data)
+static int qdio_fill_irq(struct qdio_initialize *init_data)
{
int i;
char dbf_text[15];
}
/* buffers filled forwards again to make Rick happy */
-static inline void
+static void
qdio_do_qdio_fill_input(struct qdio_q *q, unsigned int qidx,
unsigned int count, struct qdio_buffer *buffers)
{
}
}
-static inline void
+static void
qdio_do_qdio_fill_output(struct qdio_q *q, unsigned int qidx,
unsigned int count, struct qdio_buffer *buffers)
{
}
}
-static inline void
+static void
do_qdio_handle_inbound(struct qdio_q *q, unsigned int callflags,
unsigned int qidx, unsigned int count,
struct qdio_buffer *buffers)
qdio_mark_q(q);
}
-static inline void
+static void
do_qdio_handle_outbound(struct qdio_q *q, unsigned int callflags,
unsigned int qidx, unsigned int count,
struct qdio_buffer *buffers)
* Flush all requests from the request/pending queue of an AP device.
* @ap_dev: pointer to the AP device.
*/
-static inline void __ap_flush_queue(struct ap_device *ap_dev)
+static void __ap_flush_queue(struct ap_device *ap_dev)
{
struct ap_message *ap_msg, *next;
/**
* Pick one of the 16 ap domains.
*/
-static inline int ap_select_domain(void)
+static int ap_select_domain(void)
{
int queue_depth, device_type, count, max_count, best_domain;
int rc, i, j;
* required, bit 2^1 is set if the poll timer needs to get armed
* Returns 0 if the device is still present, -ENODEV if not.
*/
-static inline int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
+static int ap_poll_read(struct ap_device *ap_dev, unsigned long *flags)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
* required, bit 2^1 is set if the poll timer needs to get armed
* Returns 0 if the device is still present, -ENODEV if not.
*/
-static inline int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
+static int ap_poll_write(struct ap_device *ap_dev, unsigned long *flags)
{
struct ap_queue_status status;
struct ap_message *ap_msg;
return rc;
}
-long zcrypt_compat_ioctl(struct file *filp, unsigned int cmd,
+static long zcrypt_compat_ioctl(struct file *filp, unsigned int cmd,
unsigned long arg)
{
if (cmd == ICARSAMODEXPO)
*/
static struct proc_dir_entry *zcrypt_entry;
-static inline int sprintcl(unsigned char *outaddr, unsigned char *addr,
- unsigned int len)
+static int sprintcl(unsigned char *outaddr, unsigned char *addr,
+ unsigned int len)
{
int hl, i;
return hl;
}
-static inline int sprintrw(unsigned char *outaddr, unsigned char *addr,
- unsigned int len)
+static int sprintrw(unsigned char *outaddr, unsigned char *addr,
+ unsigned int len)
{
int hl, inl, c, cx;
return hl;
}
-static inline int sprinthx(unsigned char *title, unsigned char *outaddr,
- unsigned char *addr, unsigned int len)
+static int sprinthx(unsigned char *title, unsigned char *outaddr,
+ unsigned char *addr, unsigned int len)
{
int hl, inl, r, rx;
return hl;
}
-static inline int sprinthx4(unsigned char *title, unsigned char *outaddr,
- unsigned int *array, unsigned int len)
+static int sprinthx4(unsigned char *title, unsigned char *outaddr,
+ unsigned int *array, unsigned int len)
{
int hl, r;
zcrypt_qdepth_mask(workarea);
len += sprinthx("Waiting work element counts",
resp_buff+len, workarea, AP_DEVICES);
- zcrypt_perdev_reqcnt((unsigned int *) workarea);
+ zcrypt_perdev_reqcnt((int *) workarea);
len += sprinthx4("Per-device successfully completed request counts",
resp_buff+len,(unsigned int *) workarea, AP_DEVICES);
*eof = 1;
*
* Returns 0 on success or -EFAULT.
*/
-static inline int convert_type84(struct zcrypt_device *zdev,
- struct ap_message *reply,
- char __user *outputdata,
- unsigned int outputdatalength)
+static int convert_type84(struct zcrypt_device *zdev,
+ struct ap_message *reply,
+ char __user *outputdata,
+ unsigned int outputdatalength)
{
struct type84_hdr *t84h = reply->message;
char *data;
* PCIXCC/CEX2C device to the request distributor
* @xcRB: pointer to the send_cprb request buffer
*/
-long zcrypt_pcixcc_send_cprb(struct zcrypt_device *zdev, struct ica_xcRB *xcRB)
+static long zcrypt_pcixcc_send_cprb(struct zcrypt_device *zdev,
+ struct ica_xcRB *xcRB)
{
struct ap_message ap_msg;
struct response_type resp_type = {
#define DEBUG
#endif
- char debug_buffer[255];
+static char debug_buffer[255];
/**
* Debug Facility Stuff
*/
/* Functions */
static int add_claw_reads(struct net_device *dev,
struct ccwbk* p_first, struct ccwbk* p_last);
-static void inline ccw_check_return_code (struct ccw_device *cdev,
- int return_code);
-static void inline ccw_check_unit_check (struct chbk * p_ch,
- unsigned char sense );
+static void ccw_check_return_code (struct ccw_device *cdev, int return_code);
+static void ccw_check_unit_check (struct chbk * p_ch, unsigned char sense );
static int find_link(struct net_device *dev, char *host_name, char *ws_name );
static int claw_hw_tx(struct sk_buff *skb, struct net_device *dev, long linkid);
static int init_ccw_bk(struct net_device *dev);
static void probe_error( struct ccwgroup_device *cgdev);
static struct net_device_stats *claw_stats(struct net_device *dev);
-static int inline pages_to_order_of_mag(int num_of_pages);
+static int pages_to_order_of_mag(int num_of_pages);
static struct sk_buff *claw_pack_skb(struct claw_privbk *privptr);
#ifdef DEBUG
static void dumpit (char *buf, int len);
* of magnitude get_free_pages() has an upper order of 9 *
*--------------------------------------------------------------------*/
-static int inline
+static int
pages_to_order_of_mag(int num_of_pages)
{
int order_of_mag=1; /* assume 2 pages */
* *
*-------------------------------------------------------------------*/
-static void inline
+static void
ccw_check_return_code(struct ccw_device *cdev, int return_code)
{
#ifdef FUNCTRACE
* ccw_check_unit_check *
*--------------------------------------------------------------------*/
-static void inline
+static void
ccw_check_unit_check(struct chbk * p_ch, unsigned char sense )
{
struct net_device *dev = p_ch->ndev;
* @param ch The channel where this skb has been received.
* @param pskb The received skb.
*/
-static __inline__ void
+static void
ctc_unpack_skb(struct channel *ch, struct sk_buff *pskb)
{
struct net_device *dev = ch->netdev;
* @param ch The channel, the error belongs to.
* @param return_code The error code to inspect.
*/
-static void inline
+static void
ccw_check_return_code(struct channel *ch, int return_code, char *msg)
{
DBF_TEXT(trace, 5, __FUNCTION__);
* @param ch The channel, the sense code belongs to.
* @param sense The sense code to inspect.
*/
-static void inline
+static void
ccw_unit_check(struct channel *ch, unsigned char sense)
{
DBF_TEXT(trace, 5, __FUNCTION__);
}
}
-static __inline__ int
+static int
ctc_checkalloc_buffer(struct channel *ch, int warn)
{
DBF_TEXT(trace, 5, __FUNCTION__);
static struct ccw_driver cu3088_driver;
-struct device *cu3088_root_dev;
+static struct device *cu3088_root_dev;
static ssize_t
group_write(struct device_driver *drv, const char *buf, size_t count)
/**
* Emit buffer of a lan comand.
*/
-void
+static void
lcs_lancmd_timeout(unsigned long data)
{
struct lcs_reply *reply, *list_reply, *r;
return 0;
}
-void
+static void
lcs_schedule_recovery(struct lcs_card *card)
{
LCS_DBF_TEXT(2, trace, "startrec");
}
-DEVICE_ATTR(lancmd_timeout, 0644, lcs_timeout_show, lcs_timeout_store);
+static DEVICE_ATTR(lancmd_timeout, 0644, lcs_timeout_show, lcs_timeout_store);
static ssize_t
lcs_dev_recover_store(struct device *dev, struct device_attribute *attr,
return ret;
}
-DRIVER_ATTR(connection, 0200, NULL, conn_write);
+static DRIVER_ATTR(connection, 0200, NULL, conn_write);
static ssize_t
remove_write (struct device_driver *drv, const char *buf, size_t count)
return -EINVAL;
}
-DRIVER_ATTR(remove, 0200, NULL, remove_write);
+static DRIVER_ATTR(remove, 0200, NULL, remove_write);
static void
netiucv_banner(void)
return buffers_needed;
}
-static inline void
+static void
qeth_eddp_free_context(struct qeth_eddp_context *ctx)
{
int i;
}
}
-static inline int
+static int
qeth_eddp_buf_ref_context(struct qeth_qdio_out_buffer *buf,
struct qeth_eddp_context *ctx)
{
return flush_cnt;
}
-static inline void
+static void
qeth_eddp_create_segment_hdrs(struct qeth_eddp_context *ctx,
struct qeth_eddp_data *eddp, int data_len)
{
ctx->offset += eddp->thl;
}
-static inline void
+static void
qeth_eddp_copy_data_tcp(char *dst, struct qeth_eddp_data *eddp, int len,
__wsum *hcsum)
{
}
}
-static inline void
+static void
qeth_eddp_create_segment_data_tcp(struct qeth_eddp_context *ctx,
struct qeth_eddp_data *eddp, int data_len,
__wsum hcsum)
((struct tcphdr *)eddp->th_in_ctx)->check = csum_fold(hcsum);
}
-static inline __wsum
+static __wsum
qeth_eddp_check_tcp4_hdr(struct qeth_eddp_data *eddp, int data_len)
{
__wsum phcsum; /* pseudo header checksum */
return csum_partial((u8 *)&eddp->th, eddp->thl, phcsum);
}
-static inline __wsum
+static __wsum
qeth_eddp_check_tcp6_hdr(struct qeth_eddp_data *eddp, int data_len)
{
__be32 proto;
return phcsum;
}
-static inline struct qeth_eddp_data *
+static struct qeth_eddp_data *
qeth_eddp_create_eddp_data(struct qeth_hdr *qh, u8 *nh, u8 nhl, u8 *th, u8 thl)
{
struct qeth_eddp_data *eddp;
return eddp;
}
-static inline void
+static void
__qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
struct qeth_eddp_data *eddp)
{
}
}
-static inline int
+static int
qeth_eddp_fill_context_tcp(struct qeth_eddp_context *ctx,
struct sk_buff *skb, struct qeth_hdr *qhdr)
{
return 0;
}
-static inline void
+static void
qeth_eddp_calc_num_pages(struct qeth_eddp_context *ctx, struct sk_buff *skb,
int hdr_len)
{
(skb_shinfo(skb)->gso_segs + 1);
}
-static inline struct qeth_eddp_context *
+static struct qeth_eddp_context *
qeth_eddp_create_context_generic(struct qeth_card *card, struct sk_buff *skb,
int hdr_len)
{
return ctx;
}
-static inline struct qeth_eddp_context *
+static struct qeth_eddp_context *
qeth_eddp_create_context_tcp(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *qhdr)
{
}
return NULL;
}
-
-
return 0;
}
-static inline int
+static int
__qeth_address_exists_in_list(struct list_head *list, struct qeth_ipaddr *addr,
int same_type)
{
return rc;
}
-static inline void
+static void
__qeth_delete_all_mc(struct qeth_card *card, unsigned long *flags)
{
struct qeth_ipaddr *addr, *tmp;
static void qeth_add_multicast_ipv6(struct qeth_card *);
#endif
-static inline int
+static int
qeth_set_thread_start_bit(struct qeth_card *card, unsigned long thread)
{
unsigned long flags;
wake_up(&card->wait_q);
}
-static inline int
+static int
__qeth_do_run_thread(struct qeth_card *card, unsigned long thread)
{
unsigned long flags;
qeth_release_buffer(channel,iob);
}
-static inline void
+static void
qeth_prepare_control_data(struct qeth_card *card, int len,
-struct qeth_cmd_buffer *iob)
+ struct qeth_cmd_buffer *iob)
{
qeth_setup_ccw(&card->write,iob->data,len);
iob->callback = qeth_release_buffer;
return 0;
}
-static inline struct sk_buff *
+static struct sk_buff *
qeth_get_skb(unsigned int length, struct qeth_hdr *hdr)
{
struct sk_buff* skb;
return skb;
}
-static inline struct sk_buff *
+static struct sk_buff *
qeth_get_next_skb(struct qeth_card *card, struct qdio_buffer *buffer,
struct qdio_buffer_element **__element, int *__offset,
struct qeth_hdr **hdr)
return NULL;
}
-static inline __be16
+static __be16
qeth_type_trans(struct sk_buff *skb, struct net_device *dev)
{
struct qeth_card *card;
return htons(ETH_P_802_2);
}
-static inline void
+static void
qeth_rebuild_skb_fake_ll_tr(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
fake_llc->ethertype = ETH_P_IP;
}
-static inline void
+static void
qeth_rebuild_skb_fake_ll_eth(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
*((__u32 *)skb->cb) = ++card->seqno.pkt_seqno;
}
-static inline __u16
+static __u16
qeth_rebuild_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr *hdr)
{
return vlan_id;
}
-static inline void
+static void
qeth_process_inbound_buffer(struct qeth_card *card,
struct qeth_qdio_buffer *buf, int index)
{
}
}
-static inline struct qeth_buffer_pool_entry *
+static struct qeth_buffer_pool_entry *
qeth_get_buffer_pool_entry(struct qeth_card *card)
{
struct qeth_buffer_pool_entry *entry;
return NULL;
}
-static inline void
+static void
qeth_init_input_buffer(struct qeth_card *card, struct qeth_qdio_buffer *buf)
{
struct qeth_buffer_pool_entry *pool_entry;
buf->state = QETH_QDIO_BUF_EMPTY;
}
-static inline void
+static void
qeth_clear_output_buffer(struct qeth_qdio_out_q *queue,
struct qeth_qdio_out_buffer *buf)
{
atomic_set(&buf->state, QETH_QDIO_BUF_EMPTY);
}
-static inline void
+static void
qeth_queue_input_buffer(struct qeth_card *card, int index)
{
struct qeth_qdio_q *queue = card->qdio.in_q;
card->perf_stats.inbound_start_time;
}
-static inline int
+static int
qeth_handle_send_error(struct qeth_card *card,
struct qeth_qdio_out_buffer *buffer,
unsigned int qdio_err, unsigned int siga_err)
* Switched to packing state if the number of used buffers on a queue
* reaches a certain limit.
*/
-static inline void
+static void
qeth_switch_to_packing_if_needed(struct qeth_qdio_out_q *queue)
{
if (!queue->do_pack) {
* In that case 1 is returned to inform the caller. If no buffer
* has to be flushed, zero is returned.
*/
-static inline int
+static int
qeth_switch_to_nonpacking_if_needed(struct qeth_qdio_out_q *queue)
{
struct qeth_qdio_out_buffer *buffer;
* Checks if there is a packing buffer and prepares it to be flushed.
* In that case returns 1, otherwise zero.
*/
-static inline int
+static int
qeth_flush_buffers_on_no_pci(struct qeth_qdio_out_q *queue)
{
struct qeth_qdio_out_buffer *buffer;
return 0;
}
-static inline void
+static void
qeth_check_outbound_queue(struct qeth_qdio_out_q *queue)
{
int index;
}
}
-static inline int
+static int
qeth_send_packet(struct qeth_card *, struct sk_buff *);
static int
return 0;
}
-static inline int
+static int
qeth_get_cast_type(struct qeth_card *card, struct sk_buff *skb)
{
int cast_type = RTN_UNSPEC;
return cast_type;
}
-static inline int
+static int
qeth_get_priority_queue(struct qeth_card *card, struct sk_buff *skb,
int ipv, int cast_type)
{
}
}
-static inline struct qeth_hdr *
+static struct qeth_hdr *
__qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb, int ipv)
{
#ifdef CONFIG_QETH_VLAN
qeth_push_skb(card, skb, sizeof(struct qeth_hdr)));
}
-static inline void
+static void
__qeth_free_new_skb(struct sk_buff *orig_skb, struct sk_buff *new_skb)
{
if (orig_skb != new_skb)
dev_kfree_skb_any(new_skb);
}
-static inline struct sk_buff *
+static struct sk_buff *
qeth_prepare_skb(struct qeth_card *card, struct sk_buff *skb,
struct qeth_hdr **hdr, int ipv)
{
return ct | QETH_CAST_UNICAST;
}
-static inline void
+static void
qeth_layer2_get_packet_type(struct qeth_card *card, struct qeth_hdr *hdr,
struct sk_buff *skb)
{
}
}
-static inline void
+static void
qeth_layer2_fill_header(struct qeth_card *card, struct qeth_hdr *hdr,
struct sk_buff *skb, int cast_type)
{
}
}
-static inline void
+static void
__qeth_fill_buffer(struct sk_buff *skb, struct qdio_buffer *buffer,
int is_tso, int *next_element_to_fill)
{
*next_element_to_fill = element;
}
-static inline int
+static int
qeth_fill_buffer(struct qeth_qdio_out_q *queue,
struct qeth_qdio_out_buffer *buf,
struct sk_buff *skb)
return flush_cnt;
}
-static inline int
+static int
qeth_do_send_packet_fast(struct qeth_card *card, struct qeth_qdio_out_q *queue,
struct sk_buff *skb, struct qeth_hdr *hdr,
int elements_needed,
return -EBUSY;
}
-static inline int
+static int
qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue,
struct sk_buff *skb, struct qeth_hdr *hdr,
int elements_needed, struct qeth_eddp_context *ctx)
return rc;
}
-static inline int
+static int
qeth_get_elements_no(struct qeth_card *card, void *hdr,
struct sk_buff *skb, int elems)
{
}
-static inline int
+static int
qeth_send_packet(struct qeth_card *card, struct sk_buff *skb)
{
int ipv = 0;
}
-static inline const char *
+static const char *
qeth_arp_get_error_cause(int *rc)
{
switch (*rc) {
return rc;
}
-static inline void
+static void
qeth_copy_arp_entries_stripped(struct qeth_arp_query_info *qinfo,
struct qeth_arp_query_data *qdata,
int entry_size, int uentry_size)
spin_unlock_irqrestore(&card->vlanlock, flags);
}
-static inline void
+static void
qeth_free_vlan_buffer(struct qeth_card *card, struct qeth_qdio_out_buffer *buf,
unsigned short vid)
{
spin_unlock_irqrestore(&card->ip_lock, flags);
}
-static inline void
+static void
qeth_add_mc(struct qeth_card *card, struct in_device *in4_dev)
{
struct qeth_ipaddr *ipm;
}
#ifdef CONFIG_QETH_IPV6
-static inline void
+static void
qeth_add_mc6(struct qeth_card *card, struct inet6_dev *in6_dev)
{
struct qeth_ipaddr *ipm;
return rc;
}
-static inline void
+static void
qeth_fill_netmask(u8 *netmask, unsigned int len)
{
int i,j;
return rc;
}
-static inline int
+static int
qeth_setadapter_hstr(struct qeth_card *card)
{
int rc;
return rc;
}
-static inline int
+static int
qeth_start_ipa_arp_processing(struct qeth_card *card)
{
int rc;
wake_up(&card->wait_q);
}
-static inline int
+static int
qeth_threads_running(struct qeth_card *card, unsigned long threads)
{
unsigned long flags;
spin_unlock_irqrestore(&card->ip_lock, flags);
}
-static inline void
+static void
qeth_convert_addr_to_bits(u8 *addr, u8 *bits, int len)
{
int i, j;
static DEVICE_ATTR(buffer_count, 0644, qeth_dev_bufcnt_show,
qeth_dev_bufcnt_store);
-static inline ssize_t
+static ssize_t
qeth_dev_route_show(struct qeth_card *card, struct qeth_routing_info *route,
char *buf)
{
return qeth_dev_route_show(card, &card->options.route4, buf);
}
-static inline ssize_t
+static ssize_t
qeth_dev_route_store(struct qeth_card *card, struct qeth_routing_info *route,
enum qeth_prot_versions prot, const char *buf, size_t count)
{
.store = _store, \
};
-int
+static int
qeth_check_layer2(struct qeth_card *card)
{
if (card->options.layer2)
qeth_dev_ipato_invert4_show,
qeth_dev_ipato_invert4_store);
-static inline ssize_t
+static ssize_t
qeth_dev_ipato_add_show(char *buf, struct qeth_card *card,
enum qeth_prot_versions proto)
{
return qeth_dev_ipato_add_show(buf, card, QETH_PROT_IPV4);
}
-static inline int
+static int
qeth_parse_ipatoe(const char* buf, enum qeth_prot_versions proto,
u8 *addr, int *mask_bits)
{
return 0;
}
-static inline ssize_t
+static ssize_t
qeth_dev_ipato_add_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
qeth_dev_ipato_add4_show,
qeth_dev_ipato_add4_store);
-static inline ssize_t
+static ssize_t
qeth_dev_ipato_del_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
.attrs = (struct attribute **)qeth_ipato_device_attrs,
};
-static inline ssize_t
+static ssize_t
qeth_dev_vipa_add_show(char *buf, struct qeth_card *card,
enum qeth_prot_versions proto)
{
return qeth_dev_vipa_add_show(buf, card, QETH_PROT_IPV4);
}
-static inline int
+static int
qeth_parse_vipae(const char* buf, enum qeth_prot_versions proto,
u8 *addr)
{
return 0;
}
-static inline ssize_t
+static ssize_t
qeth_dev_vipa_add_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
qeth_dev_vipa_add4_show,
qeth_dev_vipa_add4_store);
-static inline ssize_t
+static ssize_t
qeth_dev_vipa_del_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
.attrs = (struct attribute **)qeth_vipa_device_attrs,
};
-static inline ssize_t
+static ssize_t
qeth_dev_rxip_add_show(char *buf, struct qeth_card *card,
enum qeth_prot_versions proto)
{
return qeth_dev_rxip_add_show(buf, card, QETH_PROT_IPV4);
}
-static inline int
+static int
qeth_parse_rxipe(const char* buf, enum qeth_prot_versions proto,
u8 *addr)
{
return 0;
}
-static inline ssize_t
+static ssize_t
qeth_dev_rxip_add_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
qeth_dev_rxip_add4_show,
qeth_dev_rxip_add4_store);
-static inline ssize_t
+static ssize_t
qeth_dev_rxip_del_store(const char *buf, size_t count,
struct qeth_card *card, enum qeth_prot_versions proto)
{
#include <linux/errno.h>
#include <linux/workqueue.h>
#include <linux/time.h>
+#include <linux/device.h>
#include <linux/kthread.h>
-
+#include <asm/etr.h>
#include <asm/lowcore.h>
-
+#include <asm/cio.h>
+#include "cio/cio.h"
+#include "cio/chsc.h"
+#include "cio/css.h"
#include "s390mach.h"
static struct semaphore m_sem;
-extern int css_process_crw(int, int);
-extern int chsc_process_crw(void);
-extern int chp_process_crw(int, int);
-extern void css_reiterate_subchannels(void);
-
-extern struct workqueue_struct *slow_path_wq;
-extern struct work_struct slow_path_work;
-
static NORET_TYPE void
s390_handle_damage(char *msg)
{
s390_handle_damage("unable to revalidate registers.");
}
+ if (mci->cd) {
+ /* Timing facility damage */
+ s390_handle_damage("TOD clock damaged");
+ }
+
+ if (mci->ed && mci->ec) {
+ /* External damage */
+ if (S390_lowcore.external_damage_code & (1U << ED_ETR_SYNC))
+ etr_sync_check();
+ if (S390_lowcore.external_damage_code & (1U << ED_ETR_SWITCH))
+ etr_switch_to_local();
+ }
+
if (mci->se)
/* Storage error uncorrected */
s390_handle_damage("received storage error uncorrected "
machine_check_init(void)
{
init_MUTEX_LOCKED(&m_sem);
- ctl_clear_bit(14, 25); /* disable external damage MCH */
+ ctl_set_bit(14, 25); /* enable external damage MCH */
ctl_set_bit(14, 27); /* enable system recovery MCH */
#ifdef CONFIG_MACHCHK_WARNING
ctl_set_bit(14, 24); /* enable warning MCH */
static int __init
machine_check_crw_init (void)
{
- kthread_run(s390_collect_crw_info, &m_sem, "kmcheck");
+ struct task_struct *task;
+
+ task = kthread_run(s390_collect_crw_info, &m_sem, "kmcheck");
+ if (IS_ERR(task))
+ return PTR_ERR(task);
ctl_set_bit(14, 28); /* enable channel report MCH */
return 0;
}
return ccode;
}
+#define ED_ETR_SYNC 12 /* External damage ETR sync check */
+#define ED_ETR_SWITCH 13 /* External damage ETR switch to local */
+
#endif /* __s390mach */
static void zfcp_ns_gid_pn_handler(unsigned long);
/* miscellaneous */
-static inline int zfcp_sg_list_alloc(struct zfcp_sg_list *, size_t);
-static inline void zfcp_sg_list_free(struct zfcp_sg_list *);
-static inline int zfcp_sg_list_copy_from_user(struct zfcp_sg_list *,
- void __user *, size_t);
-static inline int zfcp_sg_list_copy_to_user(void __user *,
- struct zfcp_sg_list *, size_t);
-
+static int zfcp_sg_list_alloc(struct zfcp_sg_list *, size_t);
+static void zfcp_sg_list_free(struct zfcp_sg_list *);
+static int zfcp_sg_list_copy_from_user(struct zfcp_sg_list *,
+ void __user *, size_t);
+static int zfcp_sg_list_copy_to_user(void __user *,
+ struct zfcp_sg_list *, size_t);
static long zfcp_cfdc_dev_ioctl(struct file *, unsigned int, unsigned long);
#define ZFCP_CFDC_IOC_MAGIC 0xDD
* elements of the scatter-gather list. The maximum size of a single element
* in the scatter-gather list is PAGE_SIZE.
*/
-static inline int
+static int
zfcp_sg_list_alloc(struct zfcp_sg_list *sg_list, size_t size)
{
struct scatterlist *sg;
* Memory for each element in the scatter-gather list is freed.
* Finally sg_list->sg is freed itself and sg_list->count is reset.
*/
-static inline void
+static void
zfcp_sg_list_free(struct zfcp_sg_list *sg_list)
{
struct scatterlist *sg;
* @size: number of bytes to be copied
* Return: 0 on success, -EFAULT if copy_from_user fails.
*/
-static inline int
+static int
zfcp_sg_list_copy_from_user(struct zfcp_sg_list *sg_list,
void __user *user_buffer,
size_t size)
* @size: number of bytes to be copied
* Return: 0 on success, -EFAULT if copy_to_user fails
*/
-static inline int
+static int
zfcp_sg_list_copy_to_user(void __user *user_buffer,
struct zfcp_sg_list *sg_list,
size_t size)
* @code: reason code
* @rc_table: table of reason codes and descriptions
*/
-static inline const char *
+static const char *
zfcp_rc_description(u8 code, const struct zfcp_rc_entry *rc_table)
{
const char *descr = "unknown reason code";
* @rjt_par: reject parameter acc. to FC-PH/FC-FS
* @rc_table: table of reason codes and descriptions
*/
-static inline void
+static void
zfcp_print_els_rjt(struct zfcp_ls_rjt_par *rjt_par,
const struct zfcp_rc_entry *rc_table)
{
#define ZFCP_LOG_AREA ZFCP_LOG_AREA_OTHER
-static inline int
+static int
zfcp_dbf_stck(char *out_buf, const char *label, unsigned long long stck)
{
unsigned long long sec;
return len;
}
-static inline int
+static int
zfcp_dbf_view_header(debug_info_t * id, struct debug_view *view, int area,
debug_entry_t * entry, char *out_buf)
{
return len;
}
-inline void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *fsf_req)
+void zfcp_hba_dbf_event_fsf_response(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_adapter *adapter = fsf_req->adapter;
struct fsf_qtcb *qtcb = fsf_req->qtcb;
spin_unlock_irqrestore(&adapter->hba_dbf_lock, flags);
}
-inline void
+void
zfcp_hba_dbf_event_fsf_unsol(const char *tag, struct zfcp_adapter *adapter,
struct fsf_status_read_buffer *status_buffer)
{
spin_unlock_irqrestore(&adapter->hba_dbf_lock, flags);
}
-inline void
+void
zfcp_hba_dbf_event_qdio(struct zfcp_adapter *adapter, unsigned int status,
unsigned int qdio_error, unsigned int siga_error,
int sbal_index, int sbal_count)
spin_unlock_irqrestore(&adapter->hba_dbf_lock, flags);
}
-static inline int
+static int
zfcp_hba_dbf_view_response(char *out_buf,
struct zfcp_hba_dbf_record_response *rec)
{
return len;
}
-static inline int
+static int
zfcp_hba_dbf_view_status(char *out_buf, struct zfcp_hba_dbf_record_status *rec)
{
int len = 0;
return len;
}
-static inline int
+static int
zfcp_hba_dbf_view_qdio(char *out_buf, struct zfcp_hba_dbf_record_qdio *rec)
{
int len = 0;
return len;
}
-struct debug_view zfcp_hba_dbf_view = {
+static struct debug_view zfcp_hba_dbf_view = {
"structured",
NULL,
&zfcp_dbf_view_header,
NULL
};
-inline void
+void
_zfcp_san_dbf_event_common_ct(const char *tag, struct zfcp_fsf_req *fsf_req,
u32 s_id, u32 d_id, void *buffer, int buflen)
{
spin_unlock_irqrestore(&adapter->san_dbf_lock, flags);
}
-inline void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
+void zfcp_san_dbf_event_ct_request(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_send_ct *ct = (struct zfcp_send_ct *)fsf_req->data;
struct zfcp_port *port = ct->port;
ct->req->length);
}
-inline void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
+void zfcp_san_dbf_event_ct_response(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_send_ct *ct = (struct zfcp_send_ct *)fsf_req->data;
struct zfcp_port *port = ct->port;
ct->resp->length);
}
-static inline void
+static void
_zfcp_san_dbf_event_common_els(const char *tag, int level,
struct zfcp_fsf_req *fsf_req, u32 s_id,
u32 d_id, u8 ls_code, void *buffer, int buflen)
spin_unlock_irqrestore(&adapter->san_dbf_lock, flags);
}
-inline void zfcp_san_dbf_event_els_request(struct zfcp_fsf_req *fsf_req)
+void zfcp_san_dbf_event_els_request(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_send_els *els = (struct zfcp_send_els *)fsf_req->data;
els->req->length);
}
-inline void zfcp_san_dbf_event_els_response(struct zfcp_fsf_req *fsf_req)
+void zfcp_san_dbf_event_els_response(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_send_els *els = (struct zfcp_send_els *)fsf_req->data;
els->resp->length);
}
-inline void zfcp_san_dbf_event_incoming_els(struct zfcp_fsf_req *fsf_req)
+void zfcp_san_dbf_event_incoming_els(struct zfcp_fsf_req *fsf_req)
{
struct zfcp_adapter *adapter = fsf_req->adapter;
struct fsf_status_read_buffer *status_buffer =
return len;
}
-struct debug_view zfcp_san_dbf_view = {
+static struct debug_view zfcp_san_dbf_view = {
"structured",
NULL,
&zfcp_dbf_view_header,
NULL
};
-static inline void
+static void
_zfcp_scsi_dbf_event_common(const char *tag, const char *tag2, int level,
struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
spin_unlock_irqrestore(&adapter->scsi_dbf_lock, flags);
}
-inline void
+void
zfcp_scsi_dbf_event_result(const char *tag, int level,
struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
adapter, scsi_cmnd, fsf_req, 0);
}
-inline void
+void
zfcp_scsi_dbf_event_abort(const char *tag, struct zfcp_adapter *adapter,
struct scsi_cmnd *scsi_cmnd,
struct zfcp_fsf_req *new_fsf_req,
adapter, scsi_cmnd, new_fsf_req, old_req_id);
}
-inline void
+void
zfcp_scsi_dbf_event_devreset(const char *tag, u8 flag, struct zfcp_unit *unit,
struct scsi_cmnd *scsi_cmnd)
{
return len;
}
-struct debug_view zfcp_scsi_dbf_view = {
+static struct debug_view zfcp_scsi_dbf_view = {
"structured",
NULL,
&zfcp_dbf_view_header,
* returns: 0 - initiated action successfully
* <0 - failed to initiate action
*/
-int
+static int
zfcp_erp_adapter_reopen_internal(struct zfcp_adapter *adapter, int clear_mask)
{
int retval;
* zfcp_erp_adisc - send ADISC ELS command
* @port: port structure
*/
-int
+static int
zfcp_erp_adisc(struct zfcp_port *port)
{
struct zfcp_adapter *adapter = port->adapter;
*
* If ADISC failed (LS_RJT or timed out) forced reopen of the port is triggered.
*/
-void
+static void
zfcp_erp_adisc_handler(unsigned long data)
{
struct zfcp_send_els *send_els;
break;
case ZFCP_ERP_ACTION_REOPEN_ADAPTER:
if (result != ZFCP_ERP_SUCCEEDED) {
- struct zfcp_port *port;
list_for_each_entry(port, &adapter->port_list_head, list)
if (port->rport &&
!atomic_test_mask(ZFCP_STATUS_PORT_WKA,
extern void zfcp_adapter_scsi_unregister(struct zfcp_adapter *);
extern void zfcp_set_fcp_dl(struct fcp_cmnd_iu *, fcp_dl_t);
extern char *zfcp_get_fcp_rsp_info_ptr(struct fcp_rsp_iu *);
-extern void set_host_byte(u32 *, char);
-extern void set_driver_byte(u32 *, char);
+extern void set_host_byte(int *, char);
+extern void set_driver_byte(int *, char);
extern char *zfcp_get_fcp_sns_info_ptr(struct fcp_rsp_iu *);
extern fcp_dl_t zfcp_get_fcp_dl(struct fcp_cmnd_iu *);
/*
* set qtcb pointer in fsf_req and initialize QTCB
*/
-static inline void
+static void
zfcp_fsf_req_qtcb_init(struct zfcp_fsf_req *fsf_req)
{
if (likely(fsf_req->qtcb != NULL)) {
#include "zfcp_ext.h"
-static inline void zfcp_qdio_sbal_limit(struct zfcp_fsf_req *, int);
+static void zfcp_qdio_sbal_limit(struct zfcp_fsf_req *, int);
static inline volatile struct qdio_buffer_element *zfcp_qdio_sbale_get
(struct zfcp_qdio_queue *, int, int);
static inline volatile struct qdio_buffer_element *zfcp_qdio_sbale_resp
(struct zfcp_fsf_req *, int, int);
-static inline volatile struct qdio_buffer_element *zfcp_qdio_sbal_chain
+static volatile struct qdio_buffer_element *zfcp_qdio_sbal_chain
(struct zfcp_fsf_req *, unsigned long);
-static inline volatile struct qdio_buffer_element *zfcp_qdio_sbale_next
+static volatile struct qdio_buffer_element *zfcp_qdio_sbale_next
(struct zfcp_fsf_req *, unsigned long);
-static inline int zfcp_qdio_sbals_zero(struct zfcp_qdio_queue *, int, int);
+static int zfcp_qdio_sbals_zero(struct zfcp_qdio_queue *, int, int);
static inline int zfcp_qdio_sbals_wipe(struct zfcp_fsf_req *);
-static inline void zfcp_qdio_sbale_fill
+static void zfcp_qdio_sbale_fill
(struct zfcp_fsf_req *, unsigned long, void *, int);
-static inline int zfcp_qdio_sbals_from_segment
+static int zfcp_qdio_sbals_from_segment
(struct zfcp_fsf_req *, unsigned long, void *, unsigned long);
-static inline int zfcp_qdio_sbals_from_buffer
+static int zfcp_qdio_sbals_from_buffer
(struct zfcp_fsf_req *, unsigned long, void *, unsigned long, int);
static qdio_handler_t zfcp_qdio_request_handler;
* returns: error flag
*
*/
-static inline int
+static int
zfcp_qdio_handler_error_check(struct zfcp_adapter *adapter, unsigned int status,
unsigned int qdio_error, unsigned int siga_error,
int first_element, int elements_processed)
* zfcp_qdio_sbale_req - return pointer to SBALE of request_queue for
* a struct zfcp_fsf_req
*/
-inline volatile struct qdio_buffer_element *
+volatile struct qdio_buffer_element *
zfcp_qdio_sbale_req(struct zfcp_fsf_req *fsf_req, int sbal, int sbale)
{
return zfcp_qdio_sbale_get(&fsf_req->adapter->request_queue,
* zfcp_qdio_sbale_curr - return current SBALE on request_queue for
* a struct zfcp_fsf_req
*/
-inline volatile struct qdio_buffer_element *
+volatile struct qdio_buffer_element *
zfcp_qdio_sbale_curr(struct zfcp_fsf_req *fsf_req)
{
return zfcp_qdio_sbale_req(fsf_req, fsf_req->sbal_curr,
*
* Note: We can assume at least one free SBAL in the request_queue when called.
*/
-static inline void
+static void
zfcp_qdio_sbal_limit(struct zfcp_fsf_req *fsf_req, int max_sbals)
{
int count = atomic_read(&fsf_req->adapter->request_queue.free_count);
*
* This function changes sbal_curr, sbale_curr, sbal_number of fsf_req.
*/
-static inline volatile struct qdio_buffer_element *
+static volatile struct qdio_buffer_element *
zfcp_qdio_sbal_chain(struct zfcp_fsf_req *fsf_req, unsigned long sbtype)
{
volatile struct qdio_buffer_element *sbale;
/**
* zfcp_qdio_sbale_next - switch to next SBALE, chain SBALs if needed
*/
-static inline volatile struct qdio_buffer_element *
+static volatile struct qdio_buffer_element *
zfcp_qdio_sbale_next(struct zfcp_fsf_req *fsf_req, unsigned long sbtype)
{
if (fsf_req->sbale_curr == ZFCP_LAST_SBALE_PER_SBAL)
* zfcp_qdio_sbals_zero - initialize SBALs between first and last in queue
* with zero from
*/
-static inline int
+static int
zfcp_qdio_sbals_zero(struct zfcp_qdio_queue *queue, int first, int last)
{
struct qdio_buffer **buf = queue->buffer;
* zfcp_qdio_sbale_fill - set address and lenght in current SBALE
* on request_queue
*/
-static inline void
+static void
zfcp_qdio_sbale_fill(struct zfcp_fsf_req *fsf_req, unsigned long sbtype,
void *addr, int length)
{
* Alignment and length of the segment determine how many SBALEs are needed
* for the memory segment.
*/
-static inline int
+static int
zfcp_qdio_sbals_from_segment(struct zfcp_fsf_req *fsf_req, unsigned long sbtype,
void *start_addr, unsigned long total_length)
{
* @sg_count: number of elements in scatter-gather list
* @max_sbals: upper bound for number of SBALs to be used
*/
-inline int
+int
zfcp_qdio_sbals_from_sg(struct zfcp_fsf_req *fsf_req, unsigned long sbtype,
struct scatterlist *sg, int sg_count, int max_sbals)
{
* @length: length of buffer
* @max_sbals: upper bound for number of SBALs to be used
*/
-static inline int
+static int
zfcp_qdio_sbals_from_buffer(struct zfcp_fsf_req *fsf_req, unsigned long sbtype,
void *buffer, unsigned long length, int max_sbals)
{
* @scsi_cmnd: either scatter-gather list or buffer contained herein is used
* to fill SBALs
*/
-inline int
+int
zfcp_qdio_sbals_from_scsicmnd(struct zfcp_fsf_req *fsf_req,
unsigned long sbtype, struct scsi_cmnd *scsi_cmnd)
{
return fcp_sns_info_ptr;
}
-fcp_dl_t *
+static fcp_dl_t *
zfcp_get_fcp_dl_ptr(struct fcp_cmnd_iu * fcp_cmd)
{
int additional_length = fcp_cmd->add_fcp_cdb_length << 2;
* regarding the specified byte
*/
static inline void
-set_byte(u32 * result, char status, char pos)
+set_byte(int *result, char status, char pos)
{
*result |= status << (pos * 8);
}
void
-set_host_byte(u32 * result, char status)
+set_host_byte(int *result, char status)
{
set_byte(result, status, 2);
}
void
-set_driver_byte(u32 * result, char status)
+set_driver_byte(int *result, char status)
{
set_byte(result, status, 3);
}
return retval;
}
-void
+static void
zfcp_scsi_command_sync_handler(struct scsi_cmnd *scpnt)
{
struct completion *wait = (struct completion *) scpnt->SCp.ptr;
* returns: 0 - success, SCSI command enqueued
* !0 - failure
*/
-int
+static int
zfcp_scsi_queuecommand(struct scsi_cmnd *scpnt,
void (*done) (struct scsi_cmnd *))
{
* will handle late commands. (Usually, the normal completion of late
* commands is ignored with respect to the running abort operation.)
*/
-int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
+static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
{
struct Scsi_Host *scsi_host;
struct zfcp_adapter *adapter;
return retval;
}
-int
+static int
zfcp_scsi_eh_device_reset_handler(struct scsi_cmnd *scpnt)
{
int retval;
/**
* zfcp_scsi_eh_host_reset_handler - handler for host and bus reset
*/
-int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
+static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
{
struct zfcp_unit *unit;
struct zfcp_adapter *adapter;
#include <linux/mm.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
+#include <linux/delay.h>
#include <asm/ebcdic.h>
+/* Sigh, math-emu. Don't ask. */
+#include <asm/sfp-util.h>
+#include <math-emu/soft-fp.h>
+#include <math-emu/single.h>
+
struct sysinfo_1_1_1 {
char reserved_0[32];
char manufacturer[16];
* if the higher order 8 bits are not zero. Printing
* a floating point number in the kernel is a no-no,
* always print the number as 32 bit unsigned integer.
- * The user-space needs to know about the stange
+ * The user-space needs to know about the strange
* encoding of the alternate cpu capability.
*/
len += sprintf(page + len, "Capability: %u %u\n",
__initcall(create_proc_sysinfo);
+/*
+ * CPU capability might have changed. Therefore recalculate loops_per_jiffy.
+ */
+void s390_adjust_jiffies(void)
+{
+ struct sysinfo_1_2_2 *info;
+ const unsigned int fmil = 0x4b189680; /* 1e7 as 32-bit float. */
+ FP_DECL_S(SA); FP_DECL_S(SB); FP_DECL_S(SR);
+ FP_DECL_EX;
+ unsigned int capability;
+
+ info = (void *) get_zeroed_page(GFP_KERNEL);
+ if (!info)
+ return;
+
+ if (stsi(info, 1, 2, 2) != -ENOSYS) {
+ /*
+ * Major sigh. The cpu capability encoding is "special".
+ * If the first 9 bits of info->capability are 0 then it
+ * is a 32 bit unsigned integer in the range 0 .. 2^23.
+ * If the first 9 bits are != 0 then it is a 32 bit float.
+ * In addition a lower value indicates a proportionally
+ * higher cpu capacity. Bogomips are the other way round.
+ * To get to a halfway suitable number we divide 1e7
+ * by the cpu capability number. Yes, that means a floating
+ * point division .. math-emu here we come :-)
+ */
+ FP_UNPACK_SP(SA, &fmil);
+ if ((info->capability >> 23) == 0)
+ FP_FROM_INT_S(SB, info->capability, 32, int);
+ else
+ FP_UNPACK_SP(SB, &info->capability);
+ FP_DIV_S(SR, SA, SB);
+ FP_TO_INT_S(capability, SR, 32, 0);
+ } else
+ /*
+ * Really old machine without stsi block for basic
+ * cpu information. Report 42.0 bogomips.
+ */
+ capability = 42;
+ loops_per_jiffy = capability * (500000/HZ);
+ free_page((unsigned long) info);
+}
+
+/*
+ * calibrate the delay loop
+ */
+void __init calibrate_delay(void)
+{
+ s390_adjust_jiffies();
+ /* Print the good old Bogomips line .. */
+ printk(KERN_DEBUG "Calibrating delay loop (skipped)... "
+ "%lu.%02lu BogoMIPS preset\n", loops_per_jiffy/(500000/HZ),
+ (loops_per_jiffy/(5000/HZ)) % 100);
+}
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_575C,
0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
- { PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
- PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B8,
- 0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
{ PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN_E,
PCI_VENDOR_ID_IBM, IPR_SUBS_DEV_ID_57B7,
0, 0, (kernel_ulong_t)&ipr_chip_cfg[0] },
INIT_WORK(&drv_data->pump_messages, pump_messages);
drv_data->workqueue = create_singlethread_workqueue(
- drv_data->master->cdev.dev->bus_id);
+ drv_data->master->dev.parent->bus_id);
if (drv_data->workqueue == NULL)
return -EBUSY;
spi_new_device(struct spi_master *master, struct spi_board_info *chip)
{
struct spi_device *proxy;
- struct device *dev = master->cdev.dev;
+ struct device *dev = &master->dev;
int status;
/* NOTE: caller did any chip->bus_num checks necessary */
proxy->modalias = chip->modalias;
snprintf(proxy->dev.bus_id, sizeof proxy->dev.bus_id,
- "%s.%u", master->cdev.class_id,
+ "%s.%u", master->dev.bus_id,
chip->chip_select);
proxy->dev.parent = dev;
proxy->dev.bus = &spi_bus_type;
scan_boardinfo(struct spi_master *master)
{
struct boardinfo *bi;
- struct device *dev = master->cdev.dev;
+ struct device *dev = master->dev.parent;
down(&board_lock);
list_for_each_entry(bi, &board_list, list) {
/*-------------------------------------------------------------------------*/
-static void spi_master_release(struct class_device *cdev)
+static void spi_master_release(struct device *dev)
{
struct spi_master *master;
- master = container_of(cdev, struct spi_master, cdev);
+ master = container_of(dev, struct spi_master, dev);
kfree(master);
}
static struct class spi_master_class = {
.name = "spi_master",
.owner = THIS_MODULE,
- .release = spi_master_release,
+ .dev_release = spi_master_release,
};
if (!master)
return NULL;
- class_device_initialize(&master->cdev);
- master->cdev.class = &spi_master_class;
- master->cdev.dev = get_device(dev);
+ device_initialize(&master->dev);
+ master->dev.class = &spi_master_class;
+ master->dev.parent = get_device(dev);
spi_master_set_devdata(master, &master[1]);
return master;
spi_register_master(struct spi_master *master)
{
static atomic_t dyn_bus_id = ATOMIC_INIT((1<<16) - 1);
- struct device *dev = master->cdev.dev;
+ struct device *dev = master->dev.parent;
int status = -ENODEV;
int dynamic = 0;
/* register the device, then userspace will see it.
* registration fails if the bus ID is in use.
*/
- snprintf(master->cdev.class_id, sizeof master->cdev.class_id,
+ snprintf(master->dev.bus_id, sizeof master->dev.bus_id,
"spi%u", master->bus_num);
- status = class_device_add(&master->cdev);
+ status = device_add(&master->dev);
if (status < 0)
goto done;
- dev_dbg(dev, "registered master %s%s\n", master->cdev.class_id,
+ dev_dbg(dev, "registered master %s%s\n", master->dev.bus_id,
dynamic ? " (dynamic)" : "");
/* populate children from any spi device tables */
{
int dummy;
- dummy = device_for_each_child(master->cdev.dev, NULL, __unregister);
- class_device_unregister(&master->cdev);
+ dummy = device_for_each_child(&master->dev, NULL, __unregister);
+ device_unregister(&master->dev);
}
EXPORT_SYMBOL_GPL(spi_unregister_master);
down(&spi_master_class.sem);
list_for_each_entry(cdev, &spi_master_class.children, node) {
- m = container_of(cdev, struct spi_master, cdev);
+ m = container_of(cdev, struct spi_master, dev.kobj);
if (m->bus_num == bus_num) {
master = spi_master_get(m);
break;
/* this task is the only thing to touch the SPI bits */
bitbang->busy = 0;
bitbang->workqueue = create_singlethread_workqueue(
- bitbang->master->cdev.dev->bus_id);
+ bitbang->master->dev.parent->bus_id);
if (bitbang->workqueue == NULL) {
status = -EBUSY;
goto err1;
while (!list_empty(&bitbang->queue) && limit--) {
spin_unlock_irq(&bitbang->lock);
- dev_dbg(bitbang->master->cdev.dev, "wait for queue\n");
+ dev_dbg(&bitbang->master->dev, "wait for queue\n");
msleep(10);
spin_lock_irq(&bitbang->lock);
}
spin_unlock_irq(&bitbang->lock);
if (!list_empty(&bitbang->queue)) {
- dev_err(bitbang->master->cdev.dev, "queue didn't empty\n");
+ dev_err(&bitbang->master->dev, "queue didn't empty\n");
return -EBUSY;
}
* and no way to be selective about what it binds to.
*/
- /* FIXME where should master->cdev.dev come from?
+ /* FIXME where should master->dev.parent come from?
* e.g. /sys/bus/pnp0/00:0b, some PCI thing, etc
* setting up a platform device like this is an ugly kluge...
*/
butterfly = NULL;
/* stop() unregisters child devices too */
- pdev = to_platform_device(pp->bitbang.master->cdev.dev);
+ pdev = to_platform_device(pp->bitbang.master->dev.parent);
status = spi_bitbang_stop(&pp->bitbang);
/* turn off VCC */
#include <linux/stat.h>
#include <linux/timer.h>
#include <linux/types.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/workqueue.h>
#include "usbatm.h"
retval = 0;
#endif
+ retval = usb_autopm_get_interface(intf);
+ if (retval < 0)
+ goto out;
usblp->used = 1;
file->private_data = usblp;
usblp->used = 0;
if (usblp->present) {
usblp_unlink_urbs(usblp);
+ usb_autopm_put_interface(usblp->intf);
} else /* finish cleanup from disconnect */
usblp_cleanup (usblp);
mutex_unlock (&usblp_mutex);
{
struct usblp *usblp = usb_get_intfdata (intf);
- /* this races against normal access and open */
- mutex_lock (&usblp_mutex);
- mutex_lock (&usblp->mut);
/* we take no more IO */
usblp->sleeping = 1;
usblp_unlink_urbs(usblp);
- mutex_unlock (&usblp->mut);
- mutex_unlock (&usblp_mutex);
return 0;
}
struct usblp *usblp = usb_get_intfdata (intf);
int r;
- mutex_lock (&usblp_mutex);
- mutex_lock (&usblp->mut);
-
usblp->sleeping = 0;
r = handle_bidir (usblp);
- mutex_unlock (&usblp->mut);
- mutex_unlock (&usblp_mutex);
-
return r;
}
.suspend = usblp_suspend,
.resume = usblp_resume,
.id_table = usblp_ids,
+ .supports_autosuspend = 1,
};
static int __init usblp_init(void)
Most users want to say Y here.
-config USB_BANDWIDTH
- bool "Enforce USB bandwidth allocation (EXPERIMENTAL)"
- depends on USB && EXPERIMENTAL
- help
- If you say Y here, the USB subsystem enforces USB bandwidth
- allocation and will prevent some device opens from succeeding
- if they would cause USB bandwidth usage to go above 90% of
- the bus bandwidth.
-
- If you say N here, these conditions will cause warning messages
- about USB bandwidth usage to be logged and some devices or
- drivers may not work correctly.
-
config USB_DYNAMIC_MINORS
bool "Dynamic USB minor allocation (EXPERIMENTAL)"
depends on USB && EXPERIMENTAL
*
* Call hcd_buffer_destroy() to clean up after using those pools.
*/
-int hcd_buffer_create (struct usb_hcd *hcd)
+int hcd_buffer_create(struct usb_hcd *hcd)
{
- char name [16];
+ char name[16];
int i, size;
if (!hcd->self.controller->dma_mask)
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
if (!(size = pool_max [i]))
continue;
- snprintf (name, sizeof name, "buffer-%d", size);
- hcd->pool [i] = dma_pool_create (name, hcd->self.controller,
+ snprintf(name, sizeof name, "buffer-%d", size);
+ hcd->pool[i] = dma_pool_create(name, hcd->self.controller,
size, size, 0);
if (!hcd->pool [i]) {
- hcd_buffer_destroy (hcd);
+ hcd_buffer_destroy(hcd);
return -ENOMEM;
}
}
*
* This frees the buffer pools created by hcd_buffer_create().
*/
-void hcd_buffer_destroy (struct usb_hcd *hcd)
+void hcd_buffer_destroy(struct usb_hcd *hcd)
{
int i;
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
- struct dma_pool *pool = hcd->pool [i];
+ struct dma_pool *pool = hcd->pool[i];
if (pool) {
- dma_pool_destroy (pool);
+ dma_pool_destroy(pool);
hcd->pool[i] = NULL;
}
}
* better sharing and to leverage mm/slab.c intelligence.
*/
-void *hcd_buffer_alloc (
- struct usb_bus *bus,
+void *hcd_buffer_alloc(
+ struct usb_bus *bus,
size_t size,
gfp_t mem_flags,
dma_addr_t *dma
/* some USB hosts just use PIO */
if (!bus->controller->dma_mask) {
*dma = ~(dma_addr_t) 0;
- return kmalloc (size, mem_flags);
+ return kmalloc(size, mem_flags);
}
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
if (size <= pool_max [i])
- return dma_pool_alloc (hcd->pool [i], mem_flags, dma);
+ return dma_pool_alloc(hcd->pool [i], mem_flags, dma);
}
- return dma_alloc_coherent (hcd->self.controller, size, dma, 0);
+ return dma_alloc_coherent(hcd->self.controller, size, dma, 0);
}
-void hcd_buffer_free (
- struct usb_bus *bus,
+void hcd_buffer_free(
+ struct usb_bus *bus,
size_t size,
void *addr,
dma_addr_t dma
return;
if (!bus->controller->dma_mask) {
- kfree (addr);
+ kfree(addr);
return;
}
for (i = 0; i < HCD_BUFFER_POOLS; i++) {
if (size <= pool_max [i]) {
- dma_pool_free (hcd->pool [i], addr, dma);
+ dma_pool_free(hcd->pool [i], addr, dma);
return;
}
}
- dma_free_coherent (hcd->self.controller, size, addr, dma);
+ dma_free_coherent(hcd->self.controller, size, addr, dma);
}
static const char *format_iface =
/* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
- "I: If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
+ "I:%c If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
static const char *format_endpt =
/* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */
for (ix = 0; clas_info[ix].class != -1; ix++)
if (clas_info[ix].class == class)
break;
- return (clas_info[ix].class_name);
+ return clas_info[ix].class_name;
}
-static char *usb_dump_endpoint_descriptor (
+static char *usb_dump_endpoint_descriptor(
int speed,
char *start,
char *end,
break;
case USB_ENDPOINT_XFER_INT:
type = "Int.";
- if (speed == USB_SPEED_HIGH) {
+ if (speed == USB_SPEED_HIGH)
interval = 1 << (desc->bInterval - 1);
- } else
+ else
interval = desc->bInterval;
break;
default: /* "can't happen" */
{
const struct usb_interface_descriptor *desc = &intfc->altsetting[setno].desc;
const char *driver_name = "";
+ int active = 0;
if (start > end)
return start;
down_read(&usb_bus_type.subsys.rwsem);
- if (iface)
+ if (iface) {
driver_name = (iface->dev.driver
? iface->dev.driver->name
: "(none)");
+ active = (desc == &iface->cur_altsetting->desc);
+ }
start += sprintf(start, format_iface,
+ active ? '*' : ' ', /* mark active altsetting */
desc->bInterfaceNumber,
desc->bAlternateSetting,
desc->bNumEndpoints,
if (start > end)
return start;
- start += sprintf (start, format_device1,
+ start += sprintf(start, format_device1,
bcdUSB >> 8, bcdUSB & 0xff,
desc->bDeviceClass,
class_decode (desc->bDeviceClass),
/*
* Dump the different strings that this device holds.
*/
-static char *usb_dump_device_strings (char *start, char *end, struct usb_device *dev)
+static char *usb_dump_device_strings(char *start, char *end, struct usb_device *dev)
{
if (start > end)
return start;
if (start > end)
return start;
- start = usb_dump_device_strings (start, end, dev);
+ start = usb_dump_device_strings(start, end, dev);
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (start > end)
static struct usb_device *usbdev_lookup_minor(int minor)
{
- struct class_device *class_dev;
- struct usb_device *dev = NULL;
+ struct device *device;
+ struct usb_device *udev = NULL;
down(&usb_device_class->sem);
- list_for_each_entry(class_dev, &usb_device_class->children, node) {
- if (class_dev->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
- dev = class_dev->class_data;
+ list_for_each_entry(device, &usb_device_class->devices, node) {
+ if (device->devt == MKDEV(USB_DEVICE_MAJOR, minor)) {
+ udev = device->platform_data;
break;
}
}
up(&usb_device_class->sem);
- return dev;
+ return udev;
};
/*
ps->dev = dev;
ps->file = file;
spin_lock_init(&ps->lock);
+ INIT_LIST_HEAD(&ps->list);
INIT_LIST_HEAD(&ps->async_pending);
INIT_LIST_HEAD(&ps->async_completed);
init_waitqueue_head(&ps->wait);
{
int minor = ((dev->bus->busnum-1) * 128) + (dev->devnum-1);
- dev->class_dev = class_device_create(usb_device_class, NULL,
- MKDEV(USB_DEVICE_MAJOR, minor), &dev->dev,
+ dev->usbfs_dev = device_create(usb_device_class, &dev->dev,
+ MKDEV(USB_DEVICE_MAJOR, minor),
"usbdev%d.%d", dev->bus->busnum, dev->devnum);
- if (IS_ERR(dev->class_dev))
- return PTR_ERR(dev->class_dev);
+ if (IS_ERR(dev->usbfs_dev))
+ return PTR_ERR(dev->usbfs_dev);
- dev->class_dev->class_data = dev;
+ dev->usbfs_dev->platform_data = dev;
return 0;
}
static void usbdev_remove(struct usb_device *dev)
{
- class_device_unregister(dev->class_dev);
+ device_unregister(dev->usbfs_dev);
}
static int usbdev_notify(struct notifier_block *self, unsigned long action,
#include "hcd.h"
#include "usb.h"
-static int usb_match_one_id(struct usb_interface *interface,
- const struct usb_device_id *id);
-
-struct usb_dynid {
- struct list_head node;
- struct usb_device_id id;
-};
-
#ifdef CONFIG_HOTPLUG
/*
* Adds a new dynamic USBdevice ID to this driver,
* and cause the driver to probe for all devices again.
*/
-static ssize_t store_new_id(struct device_driver *driver,
- const char *buf, size_t count)
+ssize_t usb_store_new_id(struct usb_dynids *dynids,
+ struct device_driver *driver,
+ const char *buf, size_t count)
{
- struct usb_driver *usb_drv = to_usb_driver(driver);
struct usb_dynid *dynid;
u32 idVendor = 0;
u32 idProduct = 0;
dynid->id.idProduct = idProduct;
dynid->id.match_flags = USB_DEVICE_ID_MATCH_DEVICE;
- spin_lock(&usb_drv->dynids.lock);
- list_add_tail(&usb_drv->dynids.list, &dynid->node);
- spin_unlock(&usb_drv->dynids.lock);
+ spin_lock(&dynids->lock);
+ list_add_tail(&dynids->list, &dynid->node);
+ spin_unlock(&dynids->lock);
if (get_driver(driver)) {
retval = driver_attach(driver);
return retval;
return count;
}
+EXPORT_SYMBOL_GPL(usb_store_new_id);
+
+static ssize_t store_new_id(struct device_driver *driver,
+ const char *buf, size_t count)
+{
+ struct usb_driver *usb_drv = to_usb_driver(driver);
+
+ return usb_store_new_id(&usb_drv->dynids, driver, buf, count);
+}
static DRIVER_ATTR(new_id, S_IWUSR, NULL, store_new_id);
static int usb_create_newid_file(struct usb_driver *usb_drv)
EXPORT_SYMBOL(usb_driver_release_interface);
/* returns 0 if no match, 1 if match */
-static int usb_match_one_id(struct usb_interface *interface,
- const struct usb_device_id *id)
+int usb_match_one_id(struct usb_interface *interface,
+ const struct usb_device_id *id)
{
struct usb_host_interface *intf;
struct usb_device *dev;
return 1;
}
+EXPORT_SYMBOL_GPL(usb_match_one_id);
+
/**
* usb_match_id - find first usb_device_id matching device or interface
* @interface: the interface of interest
* usb_register_dev() to enable that functionality. This function no longer
* takes care of that.
*/
-int usb_register_driver(struct usb_driver *new_driver, struct module *owner)
+int usb_register_driver(struct usb_driver *new_driver, struct module *owner,
+ const char *mod_name)
{
int retval = 0;
new_driver->drvwrap.driver.probe = usb_probe_interface;
new_driver->drvwrap.driver.remove = usb_unbind_interface;
new_driver->drvwrap.driver.owner = owner;
+ new_driver->drvwrap.driver.mod_name = mod_name;
spin_lock_init(&new_driver->dynids.lock);
INIT_LIST_HEAD(&new_driver->dynids.list);
++temp;
else
temp = name;
- intf->class_dev = class_device_create(usb_class->class, NULL,
- MKDEV(USB_MAJOR, minor),
- &intf->dev, "%s", temp);
- if (IS_ERR(intf->class_dev)) {
+ intf->usb_dev = device_create(usb_class->class, &intf->dev,
+ MKDEV(USB_MAJOR, minor), "%s", temp);
+ if (IS_ERR(intf->usb_dev)) {
spin_lock (&minor_lock);
usb_minors[intf->minor] = NULL;
spin_unlock (&minor_lock);
- retval = PTR_ERR(intf->class_dev);
+ retval = PTR_ERR(intf->usb_dev);
}
exit:
return retval;
spin_unlock (&minor_lock);
snprintf(name, BUS_ID_SIZE, class_driver->name, intf->minor - minor_base);
- class_device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
- intf->class_dev = NULL;
+ device_destroy(usb_class->class, MKDEV(USB_MAJOR, intf->minor));
+ intf->usb_dev = NULL;
intf->minor = -1;
destroy_usb_class();
}
return (n == 1 ? "" : "s");
}
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff;
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_MISC
+ && desc->bInterfaceSubClass == 1
+ && desc->bInterfaceProtocol == 1;
+}
+
static int choose_configuration(struct usb_device *udev)
{
int i;
continue;
}
- /* If the first config's first interface is COMM/2/0xff
- * (MSFT RNDIS), rule it out unless Linux has host-side
- * RNDIS support. */
- if (i == 0 && desc
- && desc->bInterfaceClass == USB_CLASS_COMM
- && desc->bInterfaceSubClass == 2
- && desc->bInterfaceProtocol == 0xff) {
-#ifndef CONFIG_USB_NET_RNDIS_HOST
+ /* When the first config's first interface is one of Microsoft's
+ * pet nonstandard Ethernet-over-USB protocols, ignore it unless
+ * this kernel has enabled the necessary host side driver.
+ */
+ if (i == 0 && desc && (is_rndis(desc) || is_activesync(desc))) {
+#if !defined(CONFIG_USB_NET_RNDIS_HOST) && !defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
continue;
#else
best = c;
#include "hub.h"
-// #define USB_BANDWIDTH_MESSAGES
-
/*-------------------------------------------------------------------------*/
/*
}
EXPORT_SYMBOL (usb_calc_bus_time);
-/*
- * usb_check_bandwidth():
- *
- * old_alloc is from host_controller->bandwidth_allocated in microseconds;
- * bustime is from calc_bus_time(), but converted to microseconds.
- *
- * returns <bustime in us> if successful,
- * or -ENOSPC if bandwidth request fails.
- *
- * FIXME:
- * This initial implementation does not use Endpoint.bInterval
- * in managing bandwidth allocation.
- * It probably needs to be expanded to use Endpoint.bInterval.
- * This can be done as a later enhancement (correction).
- *
- * This will also probably require some kind of
- * frame allocation tracking...meaning, for example,
- * that if multiple drivers request interrupts every 10 USB frames,
- * they don't all have to be allocated at
- * frame numbers N, N+10, N+20, etc. Some of them could be at
- * N+11, N+21, N+31, etc., and others at
- * N+12, N+22, N+32, etc.
- *
- * Similarly for isochronous transfers...
- *
- * Individual HCDs can schedule more directly ... this logic
- * is not correct for high speed transfers.
- */
-int usb_check_bandwidth (struct usb_device *dev, struct urb *urb)
-{
- unsigned int pipe = urb->pipe;
- long bustime;
- int is_in = usb_pipein (pipe);
- int is_iso = usb_pipeisoc (pipe);
- int old_alloc = dev->bus->bandwidth_allocated;
- int new_alloc;
-
-
- bustime = NS_TO_US (usb_calc_bus_time (dev->speed, is_in, is_iso,
- usb_maxpacket (dev, pipe, !is_in)));
- if (is_iso)
- bustime /= urb->number_of_packets;
-
- new_alloc = old_alloc + (int) bustime;
- if (new_alloc > FRAME_TIME_MAX_USECS_ALLOC) {
-#ifdef DEBUG
- char *mode =
-#ifdef CONFIG_USB_BANDWIDTH
- "";
-#else
- "would have ";
-#endif
- dev_dbg (&dev->dev, "usb_check_bandwidth %sFAILED: %d + %ld = %d usec\n",
- mode, old_alloc, bustime, new_alloc);
-#endif
-#ifdef CONFIG_USB_BANDWIDTH
- bustime = -ENOSPC; /* report error */
-#endif
- }
-
- return bustime;
-}
-EXPORT_SYMBOL (usb_check_bandwidth);
-
-
-/**
- * usb_claim_bandwidth - records bandwidth for a periodic transfer
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @bustime: bandwidth consumed, in (average) microseconds per frame
- * @isoc: true iff the request is isochronous
- *
- * Bus bandwidth reservations are recorded purely for diagnostic purposes.
- * HCDs are expected not to overcommit periodic bandwidth, and to record such
- * reservations whenever endpoints are added to the periodic schedule.
- *
- * FIXME averaging per-frame is suboptimal. Better to sum over the HCD's
- * entire periodic schedule ... 32 frames for OHCI, 1024 for UHCI, settable
- * for EHCI (256/512/1024 frames, default 1024) and have the bus expose how
- * large its periodic schedule is.
- */
-void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb, int bustime, int isoc)
-{
- dev->bus->bandwidth_allocated += bustime;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs++;
- else
- dev->bus->bandwidth_int_reqs++;
- urb->bandwidth = bustime;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc increased by %d (%s) to %d for %d requesters\n",
- bustime,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
-}
-EXPORT_SYMBOL (usb_claim_bandwidth);
-
-
-/**
- * usb_release_bandwidth - reverses effect of usb_claim_bandwidth()
- * @dev: source/target of request
- * @urb: request (urb->dev == dev)
- * @isoc: true iff the request is isochronous
- *
- * This records that previously allocated bandwidth has been released.
- * Bandwidth is released when endpoints are removed from the host controller's
- * periodic schedule.
- */
-void usb_release_bandwidth (struct usb_device *dev, struct urb *urb, int isoc)
-{
- dev->bus->bandwidth_allocated -= urb->bandwidth;
- if (isoc)
- dev->bus->bandwidth_isoc_reqs--;
- else
- dev->bus->bandwidth_int_reqs--;
-
-#ifdef USB_BANDWIDTH_MESSAGES
- dev_dbg (&dev->dev, "bandwidth alloc reduced by %d (%s) to %d for %d requesters\n",
- urb->bandwidth,
- isoc ? "ISOC" : "INTR",
- dev->bus->bandwidth_allocated,
- dev->bus->bandwidth_int_reqs + dev->bus->bandwidth_isoc_reqs);
-#endif
- urb->bandwidth = 0;
-}
-EXPORT_SYMBOL (usb_release_bandwidth);
-
/*-------------------------------------------------------------------------*/
{
unsigned long flags;
- /* Release any periodic transfer bandwidth */
- if (urb->bandwidth)
- usb_release_bandwidth (urb->dev, urb,
- usb_pipeisoc (urb->pipe));
-
/* clear all state linking urb to this dev (and hcd) */
spin_lock_irqsave (&hcd_data_lock, flags);
#define NS_TO_US(ns) ((ns + 500L) / 1000L)
/* convert & round nanoseconds to microseconds */
-extern void usb_claim_bandwidth (struct usb_device *dev, struct urb *urb,
- int bustime, int isoc);
-extern void usb_release_bandwidth (struct usb_device *dev, struct urb *urb,
- int isoc);
/*
* Full/low speed bandwidth allocation constants/support.
#define FRAME_TIME_MAX_BITS_ALLOC (90L * FRAME_TIME_BITS / 100L)
#define FRAME_TIME_MAX_USECS_ALLOC (90L * FRAME_TIME_USECS / 100L)
-extern int usb_check_bandwidth (struct usb_device *dev, struct urb *urb);
-
/*
* Ceiling [nano/micro]seconds (typical) for that many bytes at high speed
* ISO is a bit less, no ACK ... from USB 2.0 spec, 5.11.3 (and needed
static struct task_struct *khubd_task;
-/* multithreaded probe logic */
-static int multithread_probe = 0;
-
/* cycle leds on hubs that aren't blinking for attention */
static int blinkenlights = 0;
module_param (blinkenlights, bool, S_IRUGO);
static int __usb_port_suspend(struct usb_device *, int port1);
#endif
-static int __usb_new_device(void *void_data)
+/**
+ * usb_new_device - perform initial device setup (usbcore-internal)
+ * @udev: newly addressed device (in ADDRESS state)
+ *
+ * This is called with devices which have been enumerated, but not yet
+ * configured. The device descriptor is available, but not descriptors
+ * for any device configuration. The caller must have locked either
+ * the parent hub (if udev is a normal device) or else the
+ * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
+ * udev has already been installed, but udev is not yet visible through
+ * sysfs or other filesystem code.
+ *
+ * It will return if the device is configured properly or not. Zero if
+ * the interface was registered with the driver core; else a negative
+ * errno value.
+ *
+ * This call is synchronous, and may not be used in an interrupt context.
+ *
+ * Only the hub driver or root-hub registrar should ever call this.
+ */
+int usb_new_device(struct usb_device *udev)
{
- struct usb_device *udev = void_data;
int err;
/* Lock ourself into memory in order to keep a probe sequence
goto exit;
}
-/**
- * usb_new_device - perform initial device setup (usbcore-internal)
- * @udev: newly addressed device (in ADDRESS state)
- *
- * This is called with devices which have been enumerated, but not yet
- * configured. The device descriptor is available, but not descriptors
- * for any device configuration. The caller must have locked either
- * the parent hub (if udev is a normal device) or else the
- * usb_bus_list_lock (if udev is a root hub). The parent's pointer to
- * udev has already been installed, but udev is not yet visible through
- * sysfs or other filesystem code.
- *
- * The return value for this function depends on if the
- * multithread_probe variable is set or not. If it's set, it will
- * return a if the probe thread was successfully created or not. If the
- * variable is not set, it will return if the device is configured
- * properly or not. interfaces, in sysfs); else a negative errno value.
- *
- * This call is synchronous, and may not be used in an interrupt context.
- *
- * Only the hub driver or root-hub registrar should ever call this.
- */
-int usb_new_device(struct usb_device *udev)
-{
- struct task_struct *probe_task;
- int ret = 0;
-
- if (multithread_probe) {
- probe_task = kthread_run(__usb_new_device, udev,
- "usb-probe-%s", udev->devnum);
- if (IS_ERR(probe_task))
- ret = PTR_ERR(probe_task);
- } else
- ret = __usb_new_device(udev);
-
- return ret;
-}
-
static int hub_port_status(struct usb_hub *hub, int port1,
u16 *status, u16 *change)
{
INIT_WORK(&req->work, driver_set_config_work);
usb_get_dev(udev);
- if (!schedule_work(&req->work)) {
- usb_put_dev(udev);
- kfree(req);
- return -EINVAL;
- }
+ schedule_work(&req->work);
return 0;
}
EXPORT_SYMBOL_GPL(usb_driver_set_configuration);
/* Active configuration fields */
#define usb_actconfig_show(field, multiplier, format_string) \
-static ssize_t show_##field (struct device *dev, \
+static ssize_t show_##field(struct device *dev, \
struct device_attribute *attr, char *buf) \
{ \
struct usb_device *udev; \
struct usb_host_config *actconfig; \
\
- udev = to_usb_device (dev); \
+ udev = to_usb_device(dev); \
actconfig = udev->actconfig; \
if (actconfig) \
- return sprintf (buf, format_string, \
+ return sprintf(buf, format_string, \
actconfig->desc.field * multiplier); \
else \
return 0; \
usb_actconfig_show(field, multiplier, format_string) \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-usb_actconfig_attr (bNumInterfaces, 1, "%2d\n")
-usb_actconfig_attr (bmAttributes, 1, "%2x\n")
-usb_actconfig_attr (bMaxPower, 2, "%3dmA\n")
+usb_actconfig_attr(bNumInterfaces, 1, "%2d\n")
+usb_actconfig_attr(bmAttributes, 1, "%2x\n")
+usb_actconfig_attr(bMaxPower, 2, "%3dmA\n")
static ssize_t show_configuration_string(struct device *dev,
struct device_attribute *attr, char *buf)
struct usb_device *udev;
struct usb_host_config *actconfig;
- udev = to_usb_device (dev);
+ udev = to_usb_device(dev);
actconfig = udev->actconfig;
if ((!actconfig) || (!actconfig->string))
return 0;
usb_actconfig_show(bConfigurationValue, 1, "%u\n");
static ssize_t
-set_bConfigurationValue (struct device *dev, struct device_attribute *attr,
+set_bConfigurationValue(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
- struct usb_device *udev = to_usb_device (dev);
+ struct usb_device *udev = to_usb_device(dev);
int config, value;
- if (sscanf (buf, "%u", &config) != 1 || config > 255)
+ if (sscanf(buf, "%u", &config) != 1 || config > 255)
return -EINVAL;
usb_lock_device(udev);
- value = usb_set_configuration (udev, config);
+ value = usb_set_configuration(udev, config);
usb_unlock_device(udev);
return (value < 0) ? value : count;
}
{ \
struct usb_device *udev; \
\
- udev = to_usb_device (dev); \
+ udev = to_usb_device(dev); \
return sprintf(buf, "%s\n", udev->name); \
} \
static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL);
usb_string_attr(serial);
static ssize_t
-show_speed (struct device *dev, struct device_attribute *attr, char *buf)
+show_speed(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
char *speed;
- udev = to_usb_device (dev);
+ udev = to_usb_device(dev);
switch (udev->speed) {
case USB_SPEED_LOW:
default:
speed = "unknown";
}
- return sprintf (buf, "%s\n", speed);
+ return sprintf(buf, "%s\n", speed);
}
static DEVICE_ATTR(speed, S_IRUGO, show_speed, NULL);
static ssize_t
-show_devnum (struct device *dev, struct device_attribute *attr, char *buf)
+show_devnum(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
- udev = to_usb_device (dev);
- return sprintf (buf, "%d\n", udev->devnum);
+ udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", udev->devnum);
}
static DEVICE_ATTR(devnum, S_IRUGO, show_devnum, NULL);
static ssize_t
-show_version (struct device *dev, struct device_attribute *attr, char *buf)
+show_version(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
u16 bcdUSB;
static DEVICE_ATTR(version, S_IRUGO, show_version, NULL);
static ssize_t
-show_maxchild (struct device *dev, struct device_attribute *attr, char *buf)
+show_maxchild(struct device *dev, struct device_attribute *attr, char *buf)
{
struct usb_device *udev;
- udev = to_usb_device (dev);
- return sprintf (buf, "%d\n", udev->maxchild);
+ udev = to_usb_device(dev);
+ return sprintf(buf, "%d\n", udev->maxchild);
}
static DEVICE_ATTR(maxchild, S_IRUGO, show_maxchild, NULL);
/* Descriptor fields */
#define usb_descriptor_attr_le16(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, \
+show_##field(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct usb_device *udev; \
\
- udev = to_usb_device (dev); \
- return sprintf (buf, format_string, \
+ udev = to_usb_device(dev); \
+ return sprintf(buf, format_string, \
le16_to_cpu(udev->descriptor.field)); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
#define usb_descriptor_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, \
+show_##field(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
struct usb_device *udev; \
\
- udev = to_usb_device (dev); \
- return sprintf (buf, format_string, udev->descriptor.field); \
+ udev = to_usb_device(dev); \
+ return sprintf(buf, format_string, udev->descriptor.field); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-usb_descriptor_attr (bDeviceClass, "%02x\n")
-usb_descriptor_attr (bDeviceSubClass, "%02x\n")
-usb_descriptor_attr (bDeviceProtocol, "%02x\n")
-usb_descriptor_attr (bNumConfigurations, "%d\n")
-usb_descriptor_attr (bMaxPacketSize0, "%d\n")
+usb_descriptor_attr(bDeviceClass, "%02x\n")
+usb_descriptor_attr(bDeviceSubClass, "%02x\n")
+usb_descriptor_attr(bDeviceProtocol, "%02x\n")
+usb_descriptor_attr(bNumConfigurations, "%d\n")
+usb_descriptor_attr(bMaxPacketSize0, "%d\n")
static struct attribute *dev_attrs[] = {
/* current configuration's attributes */
return retval;
if (udev->manufacturer) {
- retval = device_create_file (dev, &dev_attr_manufacturer);
+ retval = device_create_file(dev, &dev_attr_manufacturer);
if (retval)
goto error;
}
if (udev->product) {
- retval = device_create_file (dev, &dev_attr_product);
+ retval = device_create_file(dev, &dev_attr_product);
if (retval)
goto error;
}
if (udev->serial) {
- retval = device_create_file (dev, &dev_attr_serial);
+ retval = device_create_file(dev, &dev_attr_serial);
if (retval)
goto error;
}
return retval;
}
-void usb_remove_sysfs_dev_files (struct usb_device *udev)
+void usb_remove_sysfs_dev_files(struct usb_device *udev)
{
struct device *dev = &udev->dev;
/* Interface fields */
#define usb_intf_attr(field, format_string) \
static ssize_t \
-show_##field (struct device *dev, struct device_attribute *attr, \
+show_##field(struct device *dev, struct device_attribute *attr, \
char *buf) \
{ \
- struct usb_interface *intf = to_usb_interface (dev); \
+ struct usb_interface *intf = to_usb_interface(dev); \
\
- return sprintf (buf, format_string, \
+ return sprintf(buf, format_string, \
intf->cur_altsetting->desc.field); \
} \
static DEVICE_ATTR(field, S_IRUGO, show_##field, NULL);
-usb_intf_attr (bInterfaceNumber, "%02x\n")
-usb_intf_attr (bAlternateSetting, "%2d\n")
-usb_intf_attr (bNumEndpoints, "%02x\n")
-usb_intf_attr (bInterfaceClass, "%02x\n")
-usb_intf_attr (bInterfaceSubClass, "%02x\n")
-usb_intf_attr (bInterfaceProtocol, "%02x\n")
+usb_intf_attr(bInterfaceNumber, "%02x\n")
+usb_intf_attr(bAlternateSetting, "%2d\n")
+usb_intf_attr(bNumEndpoints, "%02x\n")
+usb_intf_attr(bInterfaceClass, "%02x\n")
+usb_intf_attr(bInterfaceSubClass, "%02x\n")
+usb_intf_attr(bInterfaceProtocol, "%02x\n")
static ssize_t show_interface_string(struct device *dev,
struct device_attribute *attr, char *buf)
struct usb_device *udev;
int len;
- intf = to_usb_interface (dev);
- udev = interface_to_usbdev (intf);
+ intf = to_usb_interface(dev);
+ udev = interface_to_usbdev(intf);
len = snprintf(buf, 256, "%s", intf->cur_altsetting->string);
if (len < 0)
return 0;
return retval;
}
-void usb_remove_sysfs_intf_files (struct usb_interface *intf)
+void usb_remove_sysfs_intf_files(struct usb_interface *intf)
{
usb_remove_intf_ep_files(intf);
sysfs_remove_group(&intf->dev.kobj, &intf_attr_grp);
urb->status = -EINPROGRESS;
urb->actual_length = 0;
- urb->bandwidth = 0;
/* Lots of sanity checks, so HCDs can rely on clean data
* and don't need to duplicate tests
*/
pipe = urb->pipe;
- temp = usb_pipetype (pipe);
- is_out = usb_pipeout (pipe);
+ temp = usb_pipetype(pipe);
+ is_out = usb_pipeout(pipe);
- if (!usb_pipecontrol (pipe) && dev->state < USB_STATE_CONFIGURED)
+ if (!usb_pipecontrol(pipe) && dev->state < USB_STATE_CONFIGURED)
return -ENODEV;
/* FIXME there should be a sharable lock protecting us against
* checks get made.)
*/
- max = usb_maxpacket (dev, pipe, is_out);
+ max = usb_maxpacket(dev, pipe, is_out);
if (max <= 0) {
dev_dbg(&dev->dev,
"bogus endpoint ep%d%s in %s (bad maxpacket %d)\n",
- usb_pipeendpoint (pipe), is_out ? "out" : "in",
+ usb_pipeendpoint(pipe), is_out ? "out" : "in",
__FUNCTION__, max);
return -EMSGSIZE;
}
if (urb->number_of_packets <= 0)
return -EINVAL;
for (n = 0; n < urb->number_of_packets; n++) {
- len = urb->iso_frame_desc [n].length;
+ len = urb->iso_frame_desc[n].length;
if (len < 0 || len > max)
return -EMSGSIZE;
- urb->iso_frame_desc [n].status = -EXDEV;
- urb->iso_frame_desc [n].actual_length = 0;
+ urb->iso_frame_desc[n].status = -EXDEV;
+ urb->iso_frame_desc[n].actual_length = 0;
}
}
/* fail if submitter gave bogus flags */
if (urb->transfer_flags != orig_flags) {
- err ("BOGUS urb flags, %x --> %x",
+ err("BOGUS urb flags, %x --> %x",
orig_flags, urb->transfer_flags);
return -EINVAL;
}
urb->interval = temp;
}
- return usb_hcd_submit_urb (urb, mem_flags);
+ return usb_hcd_submit_urb(urb, mem_flags);
}
/*-------------------------------------------------------------------*/
* @parent: hub to which device is connected; null to allocate a root hub
* @bus: bus used to access the device
* @port1: one-based index of port; ignored for root hubs
- * Context: !in_interrupt ()
+ * Context: !in_interrupt()
*
* Only hub drivers (including virtual root hub drivers for host
* controllers) should ever call this.
* as stable: bus->busnum changes easily from modprobe order,
* cardbus or pci hotplugging, and so on.
*/
- if (unlikely (!parent)) {
- dev->devpath [0] = '0';
+ if (unlikely(!parent)) {
+ dev->devpath[0] = '0';
dev->dev.parent = bus->controller;
- sprintf (&dev->dev.bus_id[0], "usb%d", bus->busnum);
+ sprintf(&dev->dev.bus_id[0], "usb%d", bus->busnum);
} else {
/* match any labeling on the hubs; it's one-based */
- if (parent->devpath [0] == '0')
- snprintf (dev->devpath, sizeof dev->devpath,
+ if (parent->devpath[0] == '0')
+ snprintf(dev->devpath, sizeof dev->devpath,
"%d", port1);
else
- snprintf (dev->devpath, sizeof dev->devpath,
+ snprintf(dev->devpath, sizeof dev->devpath,
"%s.%d", parent->devpath, port1);
dev->dev.parent = &parent->dev;
- sprintf (&dev->dev.bus_id[0], "%d-%s",
+ sprintf(&dev->dev.bus_id[0], "%d-%s",
bus->busnum, dev->devpath);
/* hub driver sets up TT records */
/* see if this device matches */
if ((vendor_id == le16_to_cpu(dev->descriptor.idVendor)) &&
(product_id == le16_to_cpu(dev->descriptor.idProduct))) {
- dev_dbg (&dev->dev, "matched this device!\n");
+ dev_dbg(&dev->dev, "matched this device!\n");
ret_dev = usb_get_dev(dev);
goto exit;
}
*/
int usb_get_current_frame_number(struct usb_device *dev)
{
- return usb_hcd_get_frame_number (dev);
+ return usb_hcd_get_frame_number(dev);
}
/*-------------------------------------------------------------------*/
*
* When the buffer is no longer used, free it with usb_buffer_free().
*/
-void *usb_buffer_alloc (
+void *usb_buffer_alloc(
struct usb_device *dev,
size_t size,
gfp_t mem_flags,
{
if (!dev || !dev->bus)
return NULL;
- return hcd_buffer_alloc (dev->bus, size, mem_flags, dma);
+ return hcd_buffer_alloc(dev->bus, size, mem_flags, dma);
}
/**
* been allocated using usb_buffer_alloc(), and the parameters must match
* those provided in that allocation request.
*/
-void usb_buffer_free (
+void usb_buffer_free(
struct usb_device *dev,
size_t size,
void *addr,
return;
if (!addr)
return;
- hcd_buffer_free (dev->bus, size, addr, dma);
+ hcd_buffer_free(dev->bus, size, addr, dma);
}
/**
* Reverse the effect of this call with usb_buffer_unmap().
*/
#if 0
-struct urb *usb_buffer_map (struct urb *urb)
+struct urb *usb_buffer_map(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return NULL;
if (controller->dma_mask) {
- urb->transfer_dma = dma_map_single (controller,
+ urb->transfer_dma = dma_map_single(controller,
urb->transfer_buffer, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- urb->setup_dma = dma_map_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ urb->setup_dma = dma_map_single(controller,
urb->setup_packet,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
// FIXME generic api broken like pci, can't report errors
// if (urb->transfer_dma == DMA_ADDR_INVALID) return 0;
* usb_buffer_dmasync - synchronize DMA and CPU view of buffer(s)
* @urb: urb whose transfer_buffer/setup_packet will be synchronized
*/
-void usb_buffer_dmasync (struct urb *urb)
+void usb_buffer_dmasync(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return;
if (controller->dma_mask) {
- dma_sync_single (controller,
+ dma_sync_single(controller,
urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- dma_sync_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ dma_sync_single(controller,
urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
}
}
* Reverses the effect of usb_buffer_map().
*/
#if 0
-void usb_buffer_unmap (struct urb *urb)
+void usb_buffer_unmap(struct urb *urb)
{
struct usb_bus *bus;
struct device *controller;
return;
if (controller->dma_mask) {
- dma_unmap_single (controller,
+ dma_unmap_single(controller,
urb->transfer_dma, urb->transfer_buffer_length,
- usb_pipein (urb->pipe)
+ usb_pipein(urb->pipe)
? DMA_FROM_DEVICE : DMA_TO_DEVICE);
- if (usb_pipecontrol (urb->pipe))
- dma_unmap_single (controller,
+ if (usb_pipecontrol(urb->pipe))
+ dma_unmap_single(controller,
urb->setup_dma,
- sizeof (struct usb_ctrlrequest),
+ sizeof(struct usb_ctrlrequest),
DMA_TO_DEVICE);
}
urb->transfer_flags &= ~(URB_NO_TRANSFER_DMA_MAP
struct device *controller;
if (!dev
- || usb_pipecontrol (pipe)
+ || usb_pipecontrol(pipe)
|| !(bus = dev->bus)
|| !(controller = bus->controller)
|| !controller->dma_mask)
return -1;
// FIXME generic api broken like pci, can't report errors
- return dma_map_sg (controller, sg, nents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ return dma_map_sg(controller, sg, nents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* XXX DISABLED, no users currently. If you wish to re-enable this
|| !controller->dma_mask)
return;
- dma_sync_sg (controller, sg, n_hw_ents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ dma_sync_sg(controller, sg, n_hw_ents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
#endif
|| !controller->dma_mask)
return;
- dma_unmap_sg (controller, sg, n_hw_ents,
- usb_pipein (pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+ dma_unmap_sg(controller, sg, n_hw_ents,
+ usb_pipein(pipe) ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
}
/* format to disable USB on kernel command line is: nousb */
{
int retval;
if (nousb) {
- pr_info ("%s: USB support disabled\n", usbcore_name);
+ pr_info("%s: USB support disabled\n", usbcore_name);
return 0;
}
EXPORT_SYMBOL(usb_find_device);
EXPORT_SYMBOL(usb_get_current_frame_number);
-EXPORT_SYMBOL (usb_buffer_alloc);
-EXPORT_SYMBOL (usb_buffer_free);
+EXPORT_SYMBOL(usb_buffer_alloc);
+EXPORT_SYMBOL(usb_buffer_free);
#if 0
-EXPORT_SYMBOL (usb_buffer_map);
-EXPORT_SYMBOL (usb_buffer_dmasync);
-EXPORT_SYMBOL (usb_buffer_unmap);
+EXPORT_SYMBOL(usb_buffer_map);
+EXPORT_SYMBOL(usb_buffer_dmasync);
+EXPORT_SYMBOL(usb_buffer_unmap);
#endif
-EXPORT_SYMBOL (usb_buffer_map_sg);
+EXPORT_SYMBOL(usb_buffer_map_sg);
#if 0
-EXPORT_SYMBOL (usb_buffer_dmasync_sg);
+EXPORT_SYMBOL(usb_buffer_dmasync_sg);
#endif
-EXPORT_SYMBOL (usb_buffer_unmap_sg);
+EXPORT_SYMBOL(usb_buffer_unmap_sg);
MODULE_LICENSE("GPL");
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/clk.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
|| !wake
|| at91_suspend_entering_slow_clock()) {
pullup(udc, 0);
- disable_irq_wake(udc->udp_irq);
+ wake = 0;
} else
enable_irq_wake(udc->udp_irq);
- if (udc->board.vbus_pin > 0) {
- if (wake)
- enable_irq_wake(udc->board.vbus_pin);
- else
- disable_irq_wake(udc->board.vbus_pin);
- }
+ udc->active_suspend = wake;
+ if (udc->board.vbus_pin > 0 && wake)
+ enable_irq_wake(udc->board.vbus_pin);
return 0;
}
{
struct at91_udc *udc = platform_get_drvdata(pdev);
+ if (udc->board.vbus_pin > 0 && udc->active_suspend)
+ disable_irq_wake(udc->board.vbus_pin);
+
/* maybe reconnect to host; if so, clocks on */
- pullup(udc, 1);
+ if (udc->active_suspend)
+ disable_irq_wake(udc->udp_irq);
+ else
+ pullup(udc, 1);
return 0;
}
#else
unsigned wait_for_addr_ack:1;
unsigned wait_for_config_ack:1;
unsigned selfpowered:1;
+ unsigned active_suspend:1;
u8 addr;
struct at91_udc_data board;
struct clk *iclk, *fclk;
#include <linux/string.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/ctype.h>
#include <linux/string.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
#include <asm/uaccess.h>
#include <asm/unaligned.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
#include <linux/usb_gadget.h>
*
* There's some hardware that can't talk CDC. We make that hardware
* implement a "minimalist" vendor-agnostic CDC core: same framing, but
- * link-level setup only requires activating the configuration.
- * Linux supports it, but other host operating systems may not.
- * (This is a subset of CDC Ethernet.)
+ * link-level setup only requires activating the configuration. Only the
+ * endpoint descriptors, and product/vendor IDs, are relevant; no control
+ * operations are available. Linux supports it, but other host operating
+ * systems may not. (This is a subset of CDC Ethernet.)
+ *
+ * It turns out that if you add a few descriptors to that "CDC Subset",
+ * (Windows) host side drivers from MCCI can treat it as one submode of
+ * a proprietary scheme called "SAFE" ... without needing to know about
+ * specific product/vendor IDs. So we do that, making it easier to use
+ * those MS-Windows drivers. Those added descriptors make it resemble a
+ * CDC MDLM device, but they don't change device behavior at all. (See
+ * MCCI Engineering report 950198 "SAFE Networking Functions".)
*
* A third option is also in use. Rather than CDC Ethernet, or something
* simpler, Microsoft pushes their own approach: RNDIS. The published
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_S3C2410
+#define DEV_CONFIG_CDC
+#endif
+
#ifdef CONFIG_USB_GADGET_AT91
#define DEV_CONFIG_CDC
#endif
#define DEV_CONFIG_CDC
#endif
+#ifdef CONFIG_USB_GADGET_HUSB2DEV
+#define DEV_CONFIG_CDC
+#endif
+
/* For CDC-incapable hardware, choose the simple cdc subset.
* Anything that talks bulk (without notable bugs) can do this.
#define DEV_CONFIG_SUBSET
#endif
-#ifdef CONFIG_USB_GADGET_S3C2410
-#define DEV_CONFIG_CDC
-#endif
/*-------------------------------------------------------------------------*/
* endpoint. Both have a "data" interface and two bulk endpoints.
* There are also differences in how control requests are handled.
*
- * RNDIS shares a lot with CDC-Ethernet, since it's a variant of
- * the CDC-ACM (modem) spec.
+ * RNDIS shares a lot with CDC-Ethernet, since it's a variant of the
+ * CDC-ACM (modem) spec. Unfortunately MSFT's RNDIS driver is buggy; it
+ * may hang or oops. Since bugfixes (or accurate specs, letting Linux
+ * work around those bugs) are unlikely to ever come from MSFT, you may
+ * wish to avoid using RNDIS.
+ *
+ * MCCI offers an alternative to RNDIS if you need to connect to Windows
+ * but have hardware that can't support CDC Ethernet. We add descriptors
+ * to present the CDC Subset as a (nonconformant) CDC MDLM variant called
+ * "SAFE". That borrows from both CDC Ethernet and CDC MDLM. You can
+ * get those drivers from MCCI, or bundled with various products.
*/
#ifdef DEV_CONFIG_CDC
};
#endif
-#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
-
static const struct usb_cdc_header_desc header_desc = {
.bLength = sizeof header_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
.bcdCDC = __constant_cpu_to_le16 (0x0110),
};
+#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
+
static const struct usb_cdc_union_desc union_desc = {
.bLength = sizeof union_desc,
.bDescriptorType = USB_DT_CS_INTERFACE,
#endif
-#ifdef DEV_CONFIG_CDC
+#ifndef DEV_CONFIG_CDC
+
+/* "SAFE" loosely follows CDC WMC MDLM, violating the spec in various
+ * ways: data endpoints live in the control interface, there's no data
+ * interface, and it's not used to talk to a cell phone radio.
+ */
+
+static const struct usb_cdc_mdlm_desc mdlm_desc = {
+ .bLength = sizeof mdlm_desc,
+ .bDescriptorType = USB_DT_CS_INTERFACE,
+ .bDescriptorSubType = USB_CDC_MDLM_TYPE,
+
+ .bcdVersion = __constant_cpu_to_le16(0x0100),
+ .bGUID = {
+ 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6,
+ 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f,
+ },
+};
+
+/* since "usb_cdc_mdlm_detail_desc" is a variable length structure, we
+ * can't really use its struct. All we do here is say that we're using
+ * the submode of "SAFE" which directly matches the CDC Subset.
+ */
+static const u8 mdlm_detail_desc[] = {
+ 6,
+ USB_DT_CS_INTERFACE,
+ USB_CDC_MDLM_DETAIL_TYPE,
+
+ 0, /* "SAFE" */
+ 0, /* network control capabilities (none) */
+ 0, /* network data capabilities ("raw" encapsulation) */
+};
+
+#endif
static const struct usb_cdc_ether_desc ether_desc = {
.bLength = sizeof ether_desc,
.bNumberPowerFilters = 0,
};
-#endif
#if defined(DEV_CONFIG_CDC) || defined(CONFIG_USB_ETH_RNDIS)
/*
* "Simple" CDC-subset option is a simple vendor-neutral model that most
* full speed controllers can handle: one interface, two bulk endpoints.
+ *
+ * To assist host side drivers, we fancy it up a bit, and add descriptors
+ * so some host side drivers will understand it as a "SAFE" variant.
*/
static const struct usb_interface_descriptor
.bInterfaceNumber = 0,
.bAlternateSetting = 0,
.bNumEndpoints = 2,
- .bInterfaceClass = USB_CLASS_VENDOR_SPEC,
- .bInterfaceSubClass = 0,
+ .bInterfaceClass = USB_CLASS_COMM,
+ .bInterfaceSubClass = USB_CDC_SUBCLASS_MDLM,
.bInterfaceProtocol = 0,
.iInterface = STRING_DATA,
};
static inline void __init fs_subset_descriptors(void)
{
#ifdef DEV_CONFIG_SUBSET
+ /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
fs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- fs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc;
- fs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc;
- fs_eth_function[4] = NULL;
+ fs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
+ fs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
+ fs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
+ fs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc;
+ fs_eth_function[6] = (struct usb_descriptor_header *) &fs_source_desc;
+ fs_eth_function[7] = (struct usb_descriptor_header *) &fs_sink_desc;
+ fs_eth_function[8] = NULL;
#else
fs_eth_function[1] = NULL;
#endif
static inline void __init hs_subset_descriptors(void)
{
#ifdef DEV_CONFIG_SUBSET
+ /* behavior is "CDC Subset"; extra descriptors say "SAFE" */
hs_eth_function[1] = (struct usb_descriptor_header *) &subset_data_intf;
- hs_eth_function[2] = (struct usb_descriptor_header *) &fs_source_desc;
- hs_eth_function[3] = (struct usb_descriptor_header *) &fs_sink_desc;
- hs_eth_function[4] = NULL;
+ hs_eth_function[2] = (struct usb_descriptor_header *) &header_desc;
+ hs_eth_function[3] = (struct usb_descriptor_header *) &mdlm_desc;
+ hs_eth_function[4] = (struct usb_descriptor_header *) &mdlm_detail_desc;
+ hs_eth_function[5] = (struct usb_descriptor_header *) ðer_desc;
+ hs_eth_function[6] = (struct usb_descriptor_header *) &hs_source_desc;
+ hs_eth_function[7] = (struct usb_descriptor_header *) &hs_sink_desc;
+ hs_eth_function[8] = NULL;
#else
hs_eth_function[1] = NULL;
#endif
static char product_desc [40] = DRIVER_DESC;
static char serial_number [20];
-#ifdef DEV_CONFIG_CDC
/* address that the host will use ... usually assigned at random */
static char ethaddr [2 * ETH_ALEN + 1];
-#endif
/* static strings, in UTF-8 */
static struct usb_string strings [] = {
{ STRING_PRODUCT, product_desc, },
{ STRING_SERIALNUMBER, serial_number, },
{ STRING_DATA, "Ethernet Data", },
+ { STRING_ETHADDR, ethaddr, },
#ifdef DEV_CONFIG_CDC
{ STRING_CDC, "CDC Ethernet", },
- { STRING_ETHADDR, ethaddr, },
{ STRING_CONTROL, "CDC Communications Control", },
#endif
#ifdef DEV_CONFIG_SUBSET
}
#endif
- dev->in = ep_desc (dev->gadget, &hs_source_desc, &fs_source_desc);
+ dev->in = ep_desc(gadget, &hs_source_desc, &fs_source_desc);
dev->in_ep->driver_data = dev;
- dev->out = ep_desc (dev->gadget, &hs_sink_desc, &fs_sink_desc);
+ dev->out = ep_desc(gadget, &hs_sink_desc, &fs_sink_desc);
dev->out_ep->driver_data = dev;
/* With CDC, the host isn't allowed to use these two data
"RNDIS/%s", driver_desc);
/* CDC subset ... recognized by Linux since 2.4.10, but Windows
- * drivers aren't widely available.
+ * drivers aren't widely available. (That may be improved by
+ * supporting one submode of the "SAFE" variant of MDLM.)
*/
} else if (!cdc) {
- device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC;
device_desc.idVendor =
__constant_cpu_to_le16(SIMPLE_VENDOR_NUM);
device_desc.idProduct =
if (!cdc) {
eth_config.bNumInterfaces = 1;
eth_config.iConfiguration = STRING_SUBSET;
+
+ /* use functions to set these up, in case we're built to work
+ * with multiple controllers and must override CDC Ethernet.
+ */
fs_subset_descriptors();
hs_subset_descriptors();
}
/* Module params for these addresses should come from ID proms.
* The host side address is used with CDC and RNDIS, and commonly
- * ends up in a persistent config database.
+ * ends up in a persistent config database. It's not clear if
+ * host side code for the SAFE thing cares -- its original BLAN
+ * thing didn't, Sharp never assigned those addresses on Zaurii.
*/
if (get_ether_addr(dev_addr, net->dev_addr))
dev_warn(&gadget->dev,
"using random %s ethernet address\n", "self");
- if (cdc || rndis) {
- if (get_ether_addr(host_addr, dev->host_mac))
- dev_warn(&gadget->dev,
- "using random %s ethernet address\n", "host");
-#ifdef DEV_CONFIG_CDC
- snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
- dev->host_mac [0], dev->host_mac [1],
- dev->host_mac [2], dev->host_mac [3],
- dev->host_mac [4], dev->host_mac [5]);
-#endif
- }
+ if (get_ether_addr(host_addr, dev->host_mac))
+ dev_warn(&gadget->dev,
+ "using random %s ethernet address\n", "host");
+ snprintf (ethaddr, sizeof ethaddr, "%02X%02X%02X%02X%02X%02X",
+ dev->host_mac [0], dev->host_mac [1],
+ dev->host_mac [2], dev->host_mac [3],
+ dev->host_mac [4], dev->host_mac [5]);
if (rndis) {
status = rndis_init();
#include <linux/freezer.h>
#include <linux/utsname.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
+ struct fsg_dev *fsg = ep->driver_data;
if (req->actual > 0)
dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
- struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+ struct fsg_dev *fsg = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
if (req->status || req->actual != req->length)
DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
- struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+ struct fsg_dev *fsg = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
dump_msg(fsg, "bulk-out", req->buf, req->actual);
if (req->status || req->actual != bh->bulk_out_intended_length)
#ifdef CONFIG_USB_FILE_STORAGE_TEST
static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
{
- struct fsg_dev *fsg = (struct fsg_dev *) ep->driver_data;
- struct fsg_buffhd *bh = (struct fsg_buffhd *) req->context;
+ struct fsg_dev *fsg = ep->driver_data;
+ struct fsg_buffhd *bh = req->context;
if (req->status || req->actual != req->length)
DBG(fsg, "%s --> %d, %u/%u\n", __FUNCTION__,
}
if (transport_is_bbb()) {
- struct bulk_cs_wrap *csw = (struct bulk_cs_wrap *) bh->buf;
+ struct bulk_cs_wrap *csw = bh->buf;
/* Store and send the Bulk-only CSW */
csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG);
return 0;
} else { // USB_PR_CBI
- struct interrupt_data *buf = (struct interrupt_data *)
- bh->buf;
+ struct interrupt_data *buf = bh->buf;
/* Store and send the Interrupt data. UFI sends the ASC
* and ASCQ bytes. Everything else sends a Type (which
static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
{
struct usb_request *req = bh->outreq;
- struct bulk_cb_wrap *cbw = (struct bulk_cb_wrap *) req->buf;
+ struct bulk_cb_wrap *cbw = req->buf;
/* Was this a real packet? */
if (req->status)
static int fsg_main_thread(void *fsg_)
{
- struct fsg_dev *fsg = (struct fsg_dev *) fsg_;
+ struct fsg_dev *fsg = fsg_;
/* Allow the thread to be killed by a signal, but set the signal mask
* to block everything but INT, TERM, KILL, and USR1. */
static ssize_t show_file(struct device *dev, struct device_attribute *attr, char *buf)
{
struct lun *curlun = dev_to_lun(dev);
- struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
char *p;
ssize_t rc;
{
ssize_t rc = count;
struct lun *curlun = dev_to_lun(dev);
- struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
int i;
if (sscanf(buf, "%d", &i) != 1)
static ssize_t store_file(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
{
struct lun *curlun = dev_to_lun(dev);
- struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
int rc = 0;
if (curlun->prevent_medium_removal && backing_file_is_open(curlun)) {
static void lun_release(struct device *dev)
{
- struct fsg_dev *fsg = (struct fsg_dev *) dev_get_drvdata(dev);
+ struct fsg_dev *fsg = dev_get_drvdata(dev);
kref_put(&fsg->ref, fsg_release);
}
#define gadget_is_pxa27x(g) 0
#endif
+#ifdef CONFIG_USB_GADGET_HUSB2DEV
+#define gadget_is_husb2dev(g) !strcmp("husb2_udc", (g)->name)
+#else
+#define gadget_is_husb2dev(g) 0
+#endif
+
#ifdef CONFIG_USB_GADGET_S3C2410
#define gadget_is_s3c2410(g) !strcmp("s3c2410_udc", (g)->name)
#else
return 0x16;
else if (gadget_is_mpc8272(gadget))
return 0x17;
+ else if (gadget_is_husb2dev(gadget))
+ return 0x18;
return -ENOENT;
}
#include <sound/initval.h>
#include <sound/rawmidi.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb/audio.h>
#include <linux/usb/midi.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
*/
-// #define DEBUG /* data to help fault diagnosis */
+// #define DEBUG /* data to help fault diagnosis */
// #define VERBOSE /* extra debug messages (success too) */
#include <linux/init.h>
* may serve as a source of device events, used to handle all control
* requests other than basic enumeration.
*
- * - Then either immediately, or after a SET_CONFIGURATION control request,
- * ep_config() is called when each /dev/gadget/ep* file is configured
- * (by writing endpoint descriptors). Afterwards these files are used
- * to write() IN data or to read() OUT data. To halt the endpoint, a
- * "wrong direction" request is issued (like reading an IN endpoint).
+ * - Then, after a SET_CONFIGURATION control request, ep_config() is
+ * called when each /dev/gadget/ep* file is configured (by writing
+ * endpoint descriptors). Afterwards these files are used to write()
+ * IN data or to read() OUT data. To halt the endpoint, a "wrong
+ * direction" request is issued (like reading an IN endpoint).
*
* Unlike "usbfs" the only ioctl()s are for things that are rare, and maybe
* not possible on all hardware. For example, precise fault handling with
* must always write descriptors to initialize the device, then
* the device becomes UNCONNECTED until enumeration.
*/
- STATE_OPENED,
+ STATE_DEV_OPENED,
/* From then on, ep0 fd is in either of two basic modes:
* - (UN)CONNECTED: read usb_gadgetfs_event(s) from it
* - SETUP: read/write will transfer control data and succeed;
* or if "wrong direction", performs protocol stall
*/
- STATE_UNCONNECTED,
- STATE_CONNECTED,
- STATE_SETUP,
+ STATE_DEV_UNCONNECTED,
+ STATE_DEV_CONNECTED,
+ STATE_DEV_SETUP,
/* UNBOUND means the driver closed ep0, so the device won't be
* accessible again (DEV_DISABLED) until all fds are closed.
struct dev_data {
spinlock_t lock;
atomic_t count;
- enum ep0_state state;
+ enum ep0_state state; /* P: lock */
struct usb_gadgetfs_event event [N_EVENT];
unsigned ev_next;
struct fasync_struct *fasync;
enum ep_state {
STATE_EP_DISABLED = 0,
STATE_EP_READY,
- STATE_EP_DEFER_ENABLE,
STATE_EP_ENABLED,
STATE_EP_UNBOUND,
};
if ((val = down_interruptible (&epdata->lock)) < 0)
return val;
-newstate:
+
switch (epdata->state) {
case STATE_EP_ENABLED:
break;
- case STATE_EP_DEFER_ENABLE:
- DBG (epdata->dev, "%s wait for host\n", epdata->name);
- if ((val = wait_event_interruptible (epdata->wait,
- epdata->state != STATE_EP_DEFER_ENABLE
- || epdata->dev->state == STATE_DEV_UNBOUND
- )) < 0)
- goto fail;
- goto newstate;
// case STATE_EP_DISABLED: /* "can't happen" */
// case STATE_EP_READY: /* "can't happen" */
default: /* error! */
// FALLTHROUGH
case STATE_EP_UNBOUND: /* clean disconnect */
val = -ENODEV;
-fail:
up (&epdata->lock);
}
return val;
ssize_t len, total;
int i;
- /* we "retry" to get the right mm context for this: */
-
- /* copy stuff into user buffers */
- total = priv->actual;
- len = 0;
- for (i=0; i < priv->nr_segs; i++) {
- ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total);
-
- if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) {
- if (len == 0)
- len = -EFAULT;
- break;
- }
-
- total -= this;
- len += this;
- if (total == 0)
- break;
- }
- kfree(priv->buf);
- kfree(priv);
- aio_put_req(iocb);
- return len;
+ /* we "retry" to get the right mm context for this: */
+
+ /* copy stuff into user buffers */
+ total = priv->actual;
+ len = 0;
+ for (i=0; i < priv->nr_segs; i++) {
+ ssize_t this = min((ssize_t)(priv->iv[i].iov_len), total);
+
+ if (copy_to_user(priv->iv[i].iov_base, priv->buf, this)) {
+ if (len == 0)
+ len = -EFAULT;
+ break;
+ }
+
+ total -= this;
+ len += this;
+ if (total == 0)
+ break;
+ }
+ kfree(priv->buf);
+ kfree(priv);
+ return len;
}
static void ep_aio_complete(struct usb_ep *ep, struct usb_request *req)
spin_lock(&epdata->dev->lock);
priv->req = NULL;
priv->epdata = NULL;
- if (priv->iv == NULL
- || unlikely(req->actual == 0)
- || unlikely(kiocbIsCancelled(iocb))) {
+
+ /* if this was a write or a read returning no data then we
+ * don't need to copy anything to userspace, so we can
+ * complete the aio request immediately.
+ */
+ if (priv->iv == NULL || unlikely(req->actual == 0)) {
kfree(req->buf);
kfree(priv);
iocb->private = NULL;
/* aio_complete() reports bytes-transferred _and_ faults */
- if (unlikely(kiocbIsCancelled(iocb)))
- aio_put_req(iocb);
- else
- aio_complete(iocb,
- req->actual ? req->actual : req->status,
+ aio_complete(iocb, req->actual ? req->actual : req->status,
req->status);
} else {
/* retry() won't report both; so we hide some faults */
size_t len,
struct ep_data *epdata,
const struct iovec *iv,
- unsigned long nr_segs
+ unsigned long nr_segs
)
{
struct kiocb_priv *priv;
break;
#endif
default:
- DBG (data->dev, "unconnected, %s init deferred\n",
+ DBG(data->dev, "unconnected, %s init abandoned\n",
data->name);
- data->state = STATE_EP_DEFER_ENABLE;
+ value = -EINVAL;
}
if (value == 0) {
fd->f_op = &ep_io_operations;
static void ep0_complete (struct usb_ep *ep, struct usb_request *req)
{
struct dev_data *dev = ep->driver_data;
+ unsigned long flags;
int free = 1;
/* for control OUT, data must still get to userspace */
+ spin_lock_irqsave(&dev->lock, flags);
if (!dev->setup_in) {
dev->setup_out_error = (req->status != 0);
if (!dev->setup_out_error)
free = 0;
dev->setup_out_ready = 1;
ep0_readable (dev);
- } else if (dev->state == STATE_SETUP)
- dev->state = STATE_CONNECTED;
+ }
/* clean up as appropriate */
if (free && req->buf != &dev->rbuf)
clean_req (ep, req);
req->complete = epio_complete;
+ spin_unlock_irqrestore(&dev->lock, flags);
}
static int setup_req (struct usb_ep *ep, struct usb_request *req, u16 len)
}
/* control DATA stage */
- if ((state = dev->state) == STATE_SETUP) {
+ if ((state = dev->state) == STATE_DEV_SETUP) {
if (dev->setup_in) { /* stall IN */
VDEBUG(dev, "ep0in stall\n");
(void) usb_ep_set_halt (dev->gadget->ep0);
retval = -EL2HLT;
- dev->state = STATE_CONNECTED;
+ dev->state = STATE_DEV_CONNECTED;
} else if (len == 0) { /* ack SET_CONFIGURATION etc */
struct usb_ep *ep = dev->gadget->ep0;
if ((retval = setup_req (ep, req, 0)) == 0)
retval = usb_ep_queue (ep, req, GFP_ATOMIC);
- dev->state = STATE_CONNECTED;
+ dev->state = STATE_DEV_CONNECTED;
/* assume that was SET_CONFIGURATION */
if (dev->current_config) {
spin_lock_irq (&dev->lock);
if (retval)
goto done;
+
+ if (dev->state != STATE_DEV_SETUP) {
+ retval = -ECANCELED;
+ goto done;
+ }
+ dev->state = STATE_DEV_CONNECTED;
+
if (dev->setup_out_error)
retval = -EIO;
else {
/* return queued events right away */
if (dev->ev_next != 0) {
unsigned i, n;
- int tmp = dev->ev_next;
- len = min (len, tmp * sizeof (struct usb_gadgetfs_event));
n = len / sizeof (struct usb_gadgetfs_event);
+ if (dev->ev_next < n)
+ n = dev->ev_next;
- /* ep0 can't deliver events when STATE_SETUP */
+ /* ep0 i/o has special semantics during STATE_DEV_SETUP */
for (i = 0; i < n; i++) {
if (dev->event [i].type == GADGETFS_SETUP) {
- len = i + 1;
- len *= sizeof (struct usb_gadgetfs_event);
- n = 0;
+ dev->state = STATE_DEV_SETUP;
+ n = i + 1;
break;
}
}
spin_unlock_irq (&dev->lock);
+ len = n * sizeof (struct usb_gadgetfs_event);
if (copy_to_user (buf, &dev->event, len))
retval = -EFAULT;
else
retval = len;
if (len > 0) {
- len /= sizeof (struct usb_gadgetfs_event);
-
/* NOTE this doesn't guard against broken drivers;
* concurrent ep0 readers may lose events.
*/
spin_lock_irq (&dev->lock);
- dev->ev_next -= len;
- if (dev->ev_next != 0)
- memmove (&dev->event, &dev->event [len],
+ if (dev->ev_next > n) {
+ memmove(&dev->event[0], &dev->event[n],
sizeof (struct usb_gadgetfs_event)
- * (tmp - len));
- if (n == 0)
- dev->state = STATE_SETUP;
+ * (dev->ev_next - n));
+ }
+ dev->ev_next -= n;
spin_unlock_irq (&dev->lock);
}
return retval;
DBG (dev, "fail %s, state %d\n", __FUNCTION__, state);
retval = -ESRCH;
break;
- case STATE_UNCONNECTED:
- case STATE_CONNECTED:
+ case STATE_DEV_UNCONNECTED:
+ case STATE_DEV_CONNECTED:
spin_unlock_irq (&dev->lock);
DBG (dev, "%s wait\n", __FUNCTION__);
switch (type) {
/* these events purge the queue */
case GADGETFS_DISCONNECT:
- if (dev->state == STATE_SETUP)
+ if (dev->state == STATE_DEV_SETUP)
dev->setup_abort = 1;
// FALL THROUGH
case GADGETFS_CONNECT:
for (i = 0; i != dev->ev_next; i++) {
if (dev->event [i].type != type)
continue;
- DBG (dev, "discard old event %d\n", type);
+ DBG(dev, "discard old event[%d] %d\n", i, type);
dev->ev_next--;
if (i == dev->ev_next)
break;
default:
BUG ();
}
+ VDEBUG(dev, "event[%d] = %d\n", dev->ev_next, type);
event = &dev->event [dev->ev_next++];
BUG_ON (dev->ev_next > N_EVENT);
- VDEBUG (dev, "ev %d, next %d\n", type, dev->ev_next);
memset (event, 0, sizeof *event);
event->type = type;
return event;
retval = -EIDRM;
/* data and/or status stage for control request */
- } else if (dev->state == STATE_SETUP) {
+ } else if (dev->state == STATE_DEV_SETUP) {
/* IN DATA+STATUS caller makes len <= wLength */
if (dev->setup_in) {
retval = setup_req (dev->gadget->ep0, dev->req, len);
if (retval == 0) {
+ dev->state = STATE_DEV_CONNECTED;
spin_unlock_irq (&dev->lock);
if (copy_from_user (dev->req->buf, buf, len))
retval = -EFAULT;
VDEBUG(dev, "ep0out stall\n");
(void) usb_ep_set_halt (dev->gadget->ep0);
retval = -EL2HLT;
- dev->state = STATE_CONNECTED;
+ dev->state = STATE_DEV_CONNECTED;
} else {
DBG(dev, "bogus ep0out stall!\n");
}
put_dev (dev);
/* other endpoints were all decoupled from this device */
+ spin_lock_irq(&dev->lock);
dev->state = STATE_DEV_DISABLED;
+ spin_unlock_irq(&dev->lock);
return 0;
}
goto out;
}
- if (dev->state == STATE_SETUP) {
+ if (dev->state == STATE_DEV_SETUP) {
if (dev->setup_in || dev->setup_can_stall)
mask = POLLOUT;
} else {
spin_lock (&dev->lock);
dev->setup_abort = 0;
- if (dev->state == STATE_UNCONNECTED) {
- struct usb_ep *ep;
- struct ep_data *data;
-
- dev->state = STATE_CONNECTED;
- dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
-
+ if (dev->state == STATE_DEV_UNCONNECTED) {
#ifdef CONFIG_USB_GADGET_DUALSPEED
if (gadget->speed == USB_SPEED_HIGH && dev->hs_config == 0) {
+ spin_unlock(&dev->lock);
ERROR (dev, "no high speed config??\n");
return -EINVAL;
}
#endif /* CONFIG_USB_GADGET_DUALSPEED */
+ dev->state = STATE_DEV_CONNECTED;
+ dev->dev->bMaxPacketSize0 = gadget->ep0->maxpacket;
+
INFO (dev, "connected\n");
event = next_event (dev, GADGETFS_CONNECT);
event->u.speed = gadget->speed;
ep0_readable (dev);
- list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- data = ep->driver_data;
- /* ... down_trylock (&data->lock) ... */
- if (data->state != STATE_EP_DEFER_ENABLE)
- continue;
-#ifdef CONFIG_USB_GADGET_DUALSPEED
- if (gadget->speed == USB_SPEED_HIGH)
- value = usb_ep_enable (ep, &data->hs_desc);
- else
-#endif /* CONFIG_USB_GADGET_DUALSPEED */
- value = usb_ep_enable (ep, &data->desc);
- if (value) {
- ERROR (dev, "deferred %s enable --> %d\n",
- data->name, value);
- continue;
- }
- data->state = STATE_EP_ENABLED;
- wake_up (&data->wait);
- DBG (dev, "woke up %s waiters\n", data->name);
- }
-
/* host may have given up waiting for response. we can miss control
* requests handled lower down (device/endpoint status and features);
* then ep0_{read,write} will report the wrong status. controller
* driver will have aborted pending i/o.
*/
- } else if (dev->state == STATE_SETUP)
+ } else if (dev->state == STATE_DEV_SETUP)
dev->setup_abort = 1;
req->buf = dev->rbuf;
}
/* proceed with data transfer and status phases? */
- if (value >= 0 && dev->state != STATE_SETUP) {
+ if (value >= 0 && dev->state != STATE_DEV_SETUP) {
req->length = value;
req->zero = value < w_length;
value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
goto enomem;
INFO (dev, "bound to %s driver\n", gadget->name);
- dev->state = STATE_UNCONNECTED;
+ spin_lock_irq(&dev->lock);
+ dev->state = STATE_DEV_UNCONNECTED;
+ spin_unlock_irq(&dev->lock);
get_dev (dev);
return 0;
struct dev_data *dev = get_gadget_data (gadget);
spin_lock (&dev->lock);
- if (dev->state == STATE_UNCONNECTED) {
- DBG (dev, "already unconnected\n");
+ if (dev->state == STATE_DEV_UNCONNECTED)
goto exit;
- }
- dev->state = STATE_UNCONNECTED;
+ dev->state = STATE_DEV_UNCONNECTED;
INFO (dev, "disconnected\n");
next_event (dev, GADGETFS_DISCONNECT);
INFO (dev, "suspended from state %d\n", dev->state);
spin_lock (&dev->lock);
switch (dev->state) {
- case STATE_SETUP: // VERY odd... host died??
- case STATE_CONNECTED:
- case STATE_UNCONNECTED:
+ case STATE_DEV_SETUP: // VERY odd... host died??
+ case STATE_DEV_CONNECTED:
+ case STATE_DEV_UNCONNECTED:
next_event (dev, GADGETFS_SUSPEND);
ep0_readable (dev);
/* FALLTHROUGH */
.disconnect = gadgetfs_disconnect,
.suspend = gadgetfs_suspend,
- .driver = {
+ .driver = {
.name = (char *) shortname,
},
};
.unbind = gadgetfs_nop,
.setup = (void *)gadgetfs_nop,
.disconnect = gadgetfs_nop,
- .driver = {
+ .driver = {
.name = "nop",
},
};
* . full/low speed config ... all wTotalLength bytes (with interface,
* class, altsetting, endpoint, and other descriptors)
* . high speed config ... all descriptors, for high speed operation;
- * this one's optional except for high-speed hardware
+ * this one's optional except for high-speed hardware
* . device descriptor
*
- * Endpoints are not yet enabled. Drivers may want to immediately
- * initialize them, using the /dev/gadget/ep* files that are available
- * as soon as the kernel sees the configuration, or they can wait
- * until device configuration and interface altsetting changes create
+ * Endpoints are not yet enabled. Drivers must wait until device
+ * configuration and interface altsetting changes create
* the need to configure (or unconfigure) them.
*
* After initialization, the device stays active for as long as that
- * $CHIP file is open. Events may then be read from that descriptor,
- * such as configuration notifications. More complex drivers will handle
- * some control requests in user space.
+ * $CHIP file is open. Events must then be read from that descriptor,
+ * such as configuration notifications.
*/
static int is_valid_config (struct usb_config_descriptor *config)
u32 tag;
char *kbuf;
- if (dev->state != STATE_OPENED)
- return -EEXIST;
-
if (len < (USB_DT_CONFIG_SIZE + USB_DT_DEVICE_SIZE + 4))
return -EINVAL;
struct dev_data *dev = inode->i_private;
int value = -EBUSY;
+ spin_lock_irq(&dev->lock);
if (dev->state == STATE_DEV_DISABLED) {
dev->ev_next = 0;
- dev->state = STATE_OPENED;
+ dev->state = STATE_DEV_OPENED;
fd->private_data = dev;
get_dev (dev);
value = 0;
}
+ spin_unlock_irq(&dev->lock);
return value;
}
#include <asm/unaligned.h>
#include <asm/hardware.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
/*
#include <linux/interrupt.h>
#include <linux/moduleparam.h>
#include <linux/device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/byteorder.h>
#include <linux/mm.h>
#include <linux/moduleparam.h>
#include <linux/platform_device.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <linux/usb/otg.h>
#include <linux/dma-mapping.h>
#include <asm/arch/pxa-regs.h>
#endif
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/arch/udc.h>
#include <asm/unaligned.h>
#include <asm/uaccess.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb/cdc.h>
#include <linux/usb_gadget.h>
#include <linux/device.h>
#include <linux/init.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include <asm/unaligned.h>
#include <asm/system.h>
#include <asm/unaligned.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#include <linux/usb_gadget.h>
#include "gadget_chips.h"
If unsure, say N.
+config USB_EHCI_BIG_ENDIAN_MMIO
+ bool
+ depends on USB_EHCI_HCD
+ default n
+
config USB_ISP116X_HCD
tristate "ISP116X HCD support"
depends on USB
bool "OHCI support for on-chip PPC USB controller"
depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
default y
- select USB_OHCI_BIG_ENDIAN
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
---help---
Enables support for the USB controller on the MPC52xx or
STB03xxx processor chip. If unsure, say Y.
+config USB_OHCI_HCD_PPC_OF
+ bool "OHCI support for PPC USB controller on OF platform bus"
+ depends on USB_OHCI_HCD && PPC_OF
+ default y
+ ---help---
+ Enables support for the USB controller PowerPC present on the
+ OpenFirmware platform bus.
+
+config USB_OHCI_HCD_PPC_OF_BE
+ bool "Support big endian HC"
+ depends on USB_OHCI_HCD_PPC_OF
+ default y
+ select USB_OHCI_BIG_ENDIAN_DESC
+ select USB_OHCI_BIG_ENDIAN_MMIO
+
+config USB_OHCI_HCD_PPC_OF_LE
+ bool "Support little endian HC"
+ depends on USB_OHCI_HCD_PPC_OF
+ default n
+ select USB_OHCI_LITTLE_ENDIAN
+
config USB_OHCI_HCD_PCI
bool "OHCI support for PCI-bus USB controllers"
- depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx)
+ depends on USB_OHCI_HCD && PCI && (STB03xxx || PPC_MPC52xx || USB_OHCI_HCD_PPC_OF)
default y
select USB_OHCI_LITTLE_ENDIAN
---help---
Enables support for PCI-bus plug-in USB controller cards.
If unsure, say Y.
-config USB_OHCI_BIG_ENDIAN
+config USB_OHCI_BIG_ENDIAN_DESC
+ bool
+ depends on USB_OHCI_HCD
+ default n
+
+config USB_OHCI_BIG_ENDIAN_MMIO
bool
depends on USB_OHCI_HCD
default n
*/
static void dbg_hcs_params (struct ehci_hcd *ehci, char *label)
{
- u32 params = readl (&ehci->caps->hcs_params);
+ u32 params = ehci_readl(ehci, &ehci->caps->hcs_params);
ehci_dbg (ehci,
"%s hcs_params 0x%x dbg=%d%s cc=%d pcc=%d%s%s ports=%d\n",
* */
static void dbg_hcc_params (struct ehci_hcd *ehci, char *label)
{
- u32 params = readl (&ehci->caps->hcc_params);
+ u32 params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_ISOC_CACHE (params)) {
ehci_dbg (ehci,
}
/* Capability Registers */
- i = HC_VERSION(readl (&ehci->caps->hc_capbase));
+ i = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
temp = scnprintf (next, size,
"bus %s, device %s (driver " DRIVER_VERSION ")\n"
"%s\n"
unsigned count = 256/4;
pdev = to_pci_dev(ehci_to_hcd(ehci)->self.controller);
- offset = HCC_EXT_CAPS (readl (&ehci->caps->hcc_params));
+ offset = HCC_EXT_CAPS (ehci_readl(ehci, &ehci->caps->hcc_params));
while (offset && count--) {
pci_read_config_dword (pdev, offset, &cap);
switch (cap & 0xff) {
#endif
// FIXME interpret both types of params
- i = readl (&ehci->caps->hcs_params);
+ i = ehci_readl(ehci, &ehci->caps->hcs_params);
temp = scnprintf (next, size, "structural params 0x%08x\n", i);
size -= temp;
next += temp;
- i = readl (&ehci->caps->hcc_params);
+ i = ehci_readl(ehci, &ehci->caps->hcc_params);
temp = scnprintf (next, size, "capability params 0x%08x\n", i);
size -= temp;
next += temp;
/* Operational Registers */
temp = dbg_status_buf (scratch, sizeof scratch, label,
- readl (&ehci->regs->status));
+ ehci_readl(ehci, &ehci->regs->status));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = dbg_command_buf (scratch, sizeof scratch, label,
- readl (&ehci->regs->command));
+ ehci_readl(ehci, &ehci->regs->command));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = dbg_intr_buf (scratch, sizeof scratch, label,
- readl (&ehci->regs->intr_enable));
+ ehci_readl(ehci, &ehci->regs->intr_enable));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
temp = scnprintf (next, size, "uframe %04x\n",
- readl (&ehci->regs->frame_index));
+ ehci_readl(ehci, &ehci->regs->frame_index));
size -= temp;
next += temp;
for (i = 1; i <= HCS_N_PORTS (ehci->hcs_params); i++) {
temp = dbg_port_buf (scratch, sizeof scratch, label, i,
- readl (&ehci->regs->port_status [i - 1]));
+ ehci_readl(ehci, &ehci->regs->port_status [i - 1]));
temp = scnprintf (next, size, fmt, temp, scratch);
size -= temp;
next += temp;
if (i == HCS_DEBUG_PORT(ehci->hcs_params) && ehci->debug) {
temp = scnprintf (next, size,
" debug control %08x\n",
- readl (&ehci->debug->control));
+ ehci_readl(ehci, &ehci->debug->control));
size -= temp;
next += temp;
}
case FSL_USB2_PHY_NONE:
break;
}
- writel(portsc, &ehci->regs->port_status[port_offset]);
+ ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
}
static void mpc83xx_usb_setup(struct usb_hcd *hcd)
}
/* put controller in host mode. */
- writel(0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
+ ehci_writel(ehci, 0x00000003, non_ehci + FSL_SOC_USB_USBMODE);
out_be32(non_ehci + FSL_SOC_USB_PRICTRL, 0x0000000c);
out_be32(non_ehci + FSL_SOC_USB_AGECNTTHRSH, 0x00000040);
out_be32(non_ehci + FSL_SOC_USB_SICTRL, 0x00000001);
/* EHCI registers start at offset 0x100 */
ehci->caps = hcd->regs + 0x100;
ehci->regs = hcd->regs + 0x100 +
- HC_LENGTH(readl(&ehci->caps->hc_capbase));
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
/* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl(&ehci->caps->hcs_params);
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
retval = ehci_halt(ehci);
if (retval)
* before driver shutdown. But it also seems to be caused by bugs in cardbus
* bridge shutdown: shutting down the bridge before the devices using it.
*/
-static int handshake (void __iomem *ptr, u32 mask, u32 done, int usec)
+static int handshake (struct ehci_hcd *ehci, void __iomem *ptr,
+ u32 mask, u32 done, int usec)
{
u32 result;
do {
- result = readl (ptr);
+ result = ehci_readl(ehci, ptr);
if (result == ~(u32)0) /* card removed */
return -ENODEV;
result &= mask;
/* force HC to halt state from unknown (EHCI spec section 2.3) */
static int ehci_halt (struct ehci_hcd *ehci)
{
- u32 temp = readl (&ehci->regs->status);
+ u32 temp = ehci_readl(ehci, &ehci->regs->status);
/* disable any irqs left enabled by previous code */
- writel (0, &ehci->regs->intr_enable);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
if ((temp & STS_HALT) != 0)
return 0;
- temp = readl (&ehci->regs->command);
+ temp = ehci_readl(ehci, &ehci->regs->command);
temp &= ~CMD_RUN;
- writel (temp, &ehci->regs->command);
- return handshake (&ehci->regs->status, STS_HALT, STS_HALT, 16 * 125);
+ ehci_writel(ehci, temp, &ehci->regs->command);
+ return handshake (ehci, &ehci->regs->status,
+ STS_HALT, STS_HALT, 16 * 125);
}
/* put TDI/ARC silicon into EHCI mode */
u32 tmp;
reg_ptr = (u32 __iomem *)(((u8 __iomem *)ehci->regs) + 0x68);
- tmp = readl (reg_ptr);
+ tmp = ehci_readl(ehci, reg_ptr);
tmp |= 0x3;
- writel (tmp, reg_ptr);
+ ehci_writel(ehci, tmp, reg_ptr);
}
/* reset a non-running (STS_HALT == 1) controller */
static int ehci_reset (struct ehci_hcd *ehci)
{
int retval;
- u32 command = readl (&ehci->regs->command);
+ u32 command = ehci_readl(ehci, &ehci->regs->command);
command |= CMD_RESET;
dbg_cmd (ehci, "reset", command);
- writel (command, &ehci->regs->command);
+ ehci_writel(ehci, command, &ehci->regs->command);
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
ehci->next_statechange = jiffies;
- retval = handshake (&ehci->regs->command, CMD_RESET, 0, 250 * 1000);
+ retval = handshake (ehci, &ehci->regs->command,
+ CMD_RESET, 0, 250 * 1000);
if (retval)
return retval;
#endif
/* wait for any schedule enables/disables to take effect */
- temp = readl (&ehci->regs->command) << 10;
+ temp = ehci_readl(ehci, &ehci->regs->command) << 10;
temp &= STS_ASS | STS_PSS;
- if (handshake (&ehci->regs->status, STS_ASS | STS_PSS,
+ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
temp, 16 * 125) != 0) {
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
return;
}
/* then disable anything that's still active */
- temp = readl (&ehci->regs->command);
+ temp = ehci_readl(ehci, &ehci->regs->command);
temp &= ~(CMD_ASE | CMD_IAAD | CMD_PSE);
- writel (temp, &ehci->regs->command);
+ ehci_writel(ehci, temp, &ehci->regs->command);
/* hardware can take 16 microframes to turn off ... */
- if (handshake (&ehci->regs->status, STS_ASS | STS_PSS,
+ if (handshake (ehci, &ehci->regs->status, STS_ASS | STS_PSS,
0, 16 * 125) != 0) {
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
return;
/* lost IAA irqs wedge things badly; seen with a vt8235 */
if (ehci->reclaim) {
- u32 status = readl (&ehci->regs->status);
+ u32 status = ehci_readl(ehci, &ehci->regs->status);
if (status & STS_IAA) {
ehci_vdbg (ehci, "lost IAA\n");
COUNT (ehci->stats.lost_iaa);
- writel (STS_IAA, &ehci->regs->status);
+ ehci_writel(ehci, STS_IAA, &ehci->regs->status);
ehci->reclaim_ready = 1;
}
}
(void) ehci_halt (ehci);
/* make BIOS/etc use companion controller during reboot */
- writel (0, &ehci->regs->configured_flag);
+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
}
static void ehci_port_power (struct ehci_hcd *ehci, int is_on)
ehci_quiesce (ehci);
ehci_reset (ehci);
- writel (0, &ehci->regs->intr_enable);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
spin_unlock_irq(&ehci->lock);
/* let companion controllers work when we aren't */
- writel (0, &ehci->regs->configured_flag);
+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
+ remove_companion_file(ehci);
remove_debug_files (ehci);
/* root hub is shut down separately (first, when possible) */
ehci->stats.complete, ehci->stats.unlink);
#endif
- dbg_status (ehci, "ehci_stop completed", readl (&ehci->regs->status));
+ dbg_status (ehci, "ehci_stop completed",
+ ehci_readl(ehci, &ehci->regs->status));
}
/* one-time init, only for memory state */
return retval;
/* controllers may cache some of the periodic schedule ... */
- hcc_params = readl(&ehci->caps->hcc_params);
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
ehci->i_thresh = 8;
else // N microframes cached
u32 temp;
u32 hcc_params;
+ hcd->uses_new_polling = 1;
+ hcd->poll_rh = 0;
+
/* EHCI spec section 4.1 */
if ((retval = ehci_reset(ehci)) != 0) {
ehci_mem_cleanup(ehci);
return retval;
}
- writel(ehci->periodic_dma, &ehci->regs->frame_list);
- writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+ ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
/*
* hcc_params controls whether ehci->regs->segment must (!!!)
* Scsi_Host.highmem_io, and so forth. It's readonly to all
* host side drivers though.
*/
- hcc_params = readl(&ehci->caps->hcc_params);
+ hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
if (HCC_64BIT_ADDR(hcc_params)) {
- writel(0, &ehci->regs->segment);
+ ehci_writel(ehci, 0, &ehci->regs->segment);
#if 0
// this is deeply broken on almost all architectures
if (!dma_set_mask(hcd->self.controller, DMA_64BIT_MASK))
// root hub will detect new devices (why?); NEC doesn't
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
ehci->command |= CMD_RUN;
- writel (ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
/*
* and there's no companion controller unless maybe for USB OTG.)
*/
hcd->state = HC_STATE_RUNNING;
- writel (FLAG_CF, &ehci->regs->configured_flag);
- readl (&ehci->regs->command); /* unblock posted writes */
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
- temp = HC_VERSION(readl (&ehci->caps->hc_capbase));
+ temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
ehci_info (ehci,
"USB %x.%x started, EHCI %x.%02x, driver %s%s\n",
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
temp >> 8, temp & 0xff, DRIVER_VERSION,
ignore_oc ? ", overcurrent ignored" : "");
- writel (INTR_MASK, &ehci->regs->intr_enable); /* Turn On Interrupts */
+ ehci_writel(ehci, INTR_MASK,
+ &ehci->regs->intr_enable); /* Turn On Interrupts */
/* GRR this is run-once init(), being done every time the HC starts.
* So long as they're part of class devices, we can't do it init()
* since the class device isn't created that early.
*/
create_debug_files(ehci);
+ create_companion_file(ehci);
return 0;
}
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- u32 status;
+ u32 status, pcd_status = 0;
int bh;
spin_lock (&ehci->lock);
- status = readl (&ehci->regs->status);
+ status = ehci_readl(ehci, &ehci->regs->status);
/* e.g. cardbus physical eject */
if (status == ~(u32) 0) {
}
/* clear (just) interrupts */
- writel (status, &ehci->regs->status);
- readl (&ehci->regs->command); /* unblock posted write */
+ ehci_writel(ehci, status, &ehci->regs->status);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
bh = 0;
#ifdef EHCI_VERBOSE_DEBUG
/* remote wakeup [4.3.1] */
if (status & STS_PCD) {
unsigned i = HCS_N_PORTS (ehci->hcs_params);
+ pcd_status = status;
/* resume root hub? */
- if (!(readl(&ehci->regs->command) & CMD_RUN))
+ if (!(ehci_readl(ehci, &ehci->regs->command) & CMD_RUN))
usb_hcd_resume_root_hub(hcd);
while (i--) {
- int pstatus = readl (&ehci->regs->port_status [i]);
+ int pstatus = ehci_readl(ehci,
+ &ehci->regs->port_status [i]);
if (pstatus & PORT_OWNER)
continue;
/* PCI errors [4.15.2.4] */
if (unlikely ((status & STS_FATAL) != 0)) {
/* bogus "fatal" IRQs appear on some chips... why? */
- status = readl (&ehci->regs->status);
- dbg_cmd (ehci, "fatal", readl (&ehci->regs->command));
+ status = ehci_readl(ehci, &ehci->regs->status);
+ dbg_cmd (ehci, "fatal", ehci_readl(ehci,
+ &ehci->regs->command));
dbg_status (ehci, "fatal", status);
if (status & STS_HALT) {
ehci_err (ehci, "fatal error\n");
dead:
ehci_reset (ehci);
- writel (0, &ehci->regs->configured_flag);
+ ehci_writel(ehci, 0, &ehci->regs->configured_flag);
/* generic layer kills/unlinks all urbs, then
* uses ehci_stop to clean up the rest
*/
if (bh)
ehci_work (ehci);
spin_unlock (&ehci->lock);
+ if (pcd_status & STS_PCD)
+ usb_hcd_poll_rh_status(hcd);
return IRQ_HANDLED;
}
static int ehci_get_frame (struct usb_hcd *hcd)
{
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
- return (readl (&ehci->regs->frame_index) >> 3) % ehci->periodic_size;
+ return (ehci_readl(ehci, &ehci->regs->frame_index) >> 3) %
+ ehci->periodic_size;
}
/*-------------------------------------------------------------------------*/
#define PLATFORM_DRIVER ehci_hcd_au1xxx_driver
#endif
-#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER)
+#ifdef CONFIG_PPC_PS3
+#include "ehci-ps3.c"
+#define PS3_SYSTEM_BUS_DRIVER ps3_ehci_sb_driver
+#endif
+
+#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER)
#error "missing bus glue for ehci-hcd"
#endif
#ifdef PLATFORM_DRIVER
platform_driver_unregister(&PLATFORM_DRIVER);
#endif
+ return retval;
+ }
+#endif
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+ if (retval < 0) {
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+#endif
+ return retval;
}
#endif
#ifdef PCI_DRIVER
pci_unregister_driver(&PCI_DRIVER);
#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
}
module_exit(ehci_hcd_cleanup);
ehci_quiesce (ehci);
hcd->state = HC_STATE_QUIESCING;
}
- ehci->command = readl (&ehci->regs->command);
+ ehci->command = ehci_readl(ehci, &ehci->regs->command);
if (ehci->reclaim)
ehci->reclaim_ready = 1;
ehci_work(ehci);
ehci->bus_suspended = 0;
while (port--) {
u32 __iomem *reg = &ehci->regs->port_status [port];
- u32 t1 = readl (reg) & ~PORT_RWC_BITS;
+ u32 t1 = ehci_readl(ehci, reg) & ~PORT_RWC_BITS;
u32 t2 = t1;
/* keep track of which ports we suspend */
if (t1 != t2) {
ehci_vdbg (ehci, "port %d, %08x -> %08x\n",
port + 1, t1, t2);
- writel (t2, reg);
+ ehci_writel(ehci, t2, reg);
}
}
mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
mask &= ~STS_PCD;
- writel(mask, &ehci->regs->intr_enable);
- readl(&ehci->regs->intr_enable);
+ ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+ ehci_readl(ehci, &ehci->regs->intr_enable);
ehci->next_statechange = jiffies + msecs_to_jiffies(10);
spin_unlock_irq (&ehci->lock);
* the last user of the controller, not reset/pm hardware keeping
* state we gave to it.
*/
- temp = readl(&ehci->regs->intr_enable);
+ temp = ehci_readl(ehci, &ehci->regs->intr_enable);
ehci_dbg(ehci, "resume root hub%s\n", temp ? "" : " after power loss");
/* at least some APM implementations will try to deliver
* IRQs right away, so delay them until we're ready.
*/
- writel(0, &ehci->regs->intr_enable);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
/* re-init operational registers */
- writel(0, &ehci->regs->segment);
- writel(ehci->periodic_dma, &ehci->regs->frame_list);
- writel((u32) ehci->async->qh_dma, &ehci->regs->async_next);
+ ehci_writel(ehci, 0, &ehci->regs->segment);
+ ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
+ ehci_writel(ehci, (u32) ehci->async->qh_dma, &ehci->regs->async_next);
/* restore CMD_RUN, framelist size, and irq threshold */
- writel (ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
/* manually resume the ports we suspended during bus_suspend() */
i = HCS_N_PORTS (ehci->hcs_params);
while (i--) {
- temp = readl (&ehci->regs->port_status [i]);
+ temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
temp &= ~(PORT_RWC_BITS
| PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E);
if (test_bit(i, &ehci->bus_suspended) &&
ehci->reset_done [i] = jiffies + msecs_to_jiffies (20);
temp |= PORT_RESUME;
}
- writel (temp, &ehci->regs->port_status [i]);
+ ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
}
i = HCS_N_PORTS (ehci->hcs_params);
mdelay (20);
while (i--) {
- temp = readl (&ehci->regs->port_status [i]);
+ temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
if (test_bit(i, &ehci->bus_suspended) &&
(temp & PORT_SUSPEND)) {
temp &= ~(PORT_RWC_BITS | PORT_RESUME);
- writel (temp, &ehci->regs->port_status [i]);
+ ehci_writel(ehci, temp, &ehci->regs->port_status [i]);
ehci_vdbg (ehci, "resumed port %d\n", i + 1);
}
}
- (void) readl (&ehci->regs->command);
+ (void) ehci_readl(ehci, &ehci->regs->command);
/* maybe re-activate the schedule(s) */
temp = 0;
temp |= CMD_PSE;
if (temp) {
ehci->command |= temp;
- writel (ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
}
ehci->next_statechange = jiffies + msecs_to_jiffies(5);
hcd->state = HC_STATE_RUNNING;
/* Now we can safely re-enable irqs */
- writel(INTR_MASK, &ehci->regs->intr_enable);
+ ehci_writel(ehci, INTR_MASK, &ehci->regs->intr_enable);
spin_unlock_irq (&ehci->lock);
return 0;
#endif /* CONFIG_PM */
+/*-------------------------------------------------------------------------*/
+
+/* Display the ports dedicated to the companion controller */
+static ssize_t show_companion(struct class_device *class_dev, char *buf)
+{
+ struct ehci_hcd *ehci;
+ int nports, index, n;
+ int count = PAGE_SIZE;
+ char *ptr = buf;
+
+ ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
+ nports = HCS_N_PORTS(ehci->hcs_params);
+
+ for (index = 0; index < nports; ++index) {
+ if (test_bit(index, &ehci->companion_ports)) {
+ n = scnprintf(ptr, count, "%d\n", index + 1);
+ ptr += n;
+ count -= n;
+ }
+ }
+ return ptr - buf;
+}
+
+/*
+ * Dedicate or undedicate a port to the companion controller.
+ * Syntax is "[-]portnum", where a leading '-' sign means
+ * return control of the port to the EHCI controller.
+ */
+static ssize_t store_companion(struct class_device *class_dev,
+ const char *buf, size_t count)
+{
+ struct ehci_hcd *ehci;
+ int portnum, new_owner, try;
+ u32 __iomem *status_reg;
+ u32 port_status;
+
+ ehci = hcd_to_ehci(bus_to_hcd(class_get_devdata(class_dev)));
+ new_owner = PORT_OWNER; /* Owned by companion */
+ if (sscanf(buf, "%d", &portnum) != 1)
+ return -EINVAL;
+ if (portnum < 0) {
+ portnum = - portnum;
+ new_owner = 0; /* Owned by EHCI */
+ }
+ if (portnum <= 0 || portnum > HCS_N_PORTS(ehci->hcs_params))
+ return -ENOENT;
+ status_reg = &ehci->regs->port_status[--portnum];
+ if (new_owner)
+ set_bit(portnum, &ehci->companion_ports);
+ else
+ clear_bit(portnum, &ehci->companion_ports);
+
+ /*
+ * The controller won't set the OWNER bit if the port is
+ * enabled, so this loop will sometimes require at least two
+ * iterations: one to disable the port and one to set OWNER.
+ */
+
+ for (try = 4; try > 0; --try) {
+ spin_lock_irq(&ehci->lock);
+ port_status = ehci_readl(ehci, status_reg);
+ if ((port_status & PORT_OWNER) == new_owner
+ || (port_status & (PORT_OWNER | PORT_CONNECT))
+ == 0)
+ try = 0;
+ else {
+ port_status ^= PORT_OWNER;
+ port_status &= ~(PORT_PE | PORT_RWC_BITS);
+ ehci_writel(ehci, port_status, status_reg);
+ }
+ spin_unlock_irq(&ehci->lock);
+ if (try > 1)
+ msleep(5);
+ }
+ return count;
+}
+static CLASS_DEVICE_ATTR(companion, 0644, show_companion, store_companion);
+
+static inline void create_companion_file(struct ehci_hcd *ehci)
+{
+ int i;
+
+ /* with integrated TT there is no companion! */
+ if (!ehci_is_TDI(ehci))
+ i = class_device_create_file(ehci_to_hcd(ehci)->self.class_dev,
+ &class_device_attr_companion);
+}
+
+static inline void remove_companion_file(struct ehci_hcd *ehci)
+{
+ /* with integrated TT there is no companion! */
+ if (!ehci_is_TDI(ehci))
+ class_device_remove_file(ehci_to_hcd(ehci)->self.class_dev,
+ &class_device_attr_companion);
+}
+
+
/*-------------------------------------------------------------------------*/
static int check_reset_complete (
struct ehci_hcd *ehci,
int index,
+ u32 __iomem *status_reg,
int port_status
) {
if (!(port_status & PORT_CONNECT)) {
// what happens if HCS_N_CC(params) == 0 ?
port_status |= PORT_OWNER;
port_status &= ~PORT_RWC_BITS;
- writel (port_status, &ehci->regs->port_status [index]);
+ ehci_writel(ehci, port_status, status_reg);
} else
ehci_dbg (ehci, "port %d high speed\n", index + 1);
/* port N changes (bit N)? */
spin_lock_irqsave (&ehci->lock, flags);
for (i = 0; i < ports; i++) {
- temp = readl (&ehci->regs->port_status [i]);
- if (temp & PORT_OWNER) {
- /* don't report this in GetPortStatus */
- if (temp & PORT_CSC) {
- temp &= ~PORT_RWC_BITS;
- temp |= PORT_CSC;
- writel (temp, &ehci->regs->port_status [i]);
- }
- continue;
- }
+ temp = ehci_readl(ehci, &ehci->regs->port_status [i]);
+
+ /*
+ * Return status information even for ports with OWNER set.
+ * Otherwise khubd wouldn't see the disconnect event when a
+ * high-speed device is switched over to the companion
+ * controller by the user.
+ */
+
if (!(temp & PORT_CONNECT))
ehci->reset_done [i] = 0;
if ((temp & mask) != 0
|| ((temp & PORT_RESUME) != 0
- && time_after (jiffies,
- ehci->reset_done [i]))) {
+ && time_after_eq(jiffies,
+ ehci->reset_done[i]))) {
if (i < 7)
buf [0] |= 1 << (i + 1);
else
) {
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
int ports = HCS_N_PORTS (ehci->hcs_params);
+ u32 __iomem *status_reg = &ehci->regs->port_status[wIndex - 1];
u32 temp, status;
unsigned long flags;
int retval = 0;
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
- temp = readl (&ehci->regs->port_status [wIndex]);
- if (temp & PORT_OWNER)
- break;
+ temp = ehci_readl(ehci, status_reg);
+
+ /*
+ * Even if OWNER is set, so the port is owned by the
+ * companion controller, khubd needs to be able to clear
+ * the port-change status bits (especially
+ * USB_PORT_FEAT_C_CONNECTION).
+ */
switch (wValue) {
case USB_PORT_FEAT_ENABLE:
- writel (temp & ~PORT_PE,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp & ~PORT_PE, status_reg);
break;
case USB_PORT_FEAT_C_ENABLE:
- writel((temp & ~PORT_RWC_BITS) | PORT_PEC,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_PEC,
+ status_reg);
break;
case USB_PORT_FEAT_SUSPEND:
if (temp & PORT_RESET)
goto error;
/* resume signaling for 20 msec */
temp &= ~(PORT_RWC_BITS | PORT_WAKE_BITS);
- writel (temp | PORT_RESUME,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp | PORT_RESUME,
+ status_reg);
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (20);
}
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
- writel (temp & ~(PORT_RWC_BITS | PORT_POWER),
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci,
+ temp & ~(PORT_RWC_BITS | PORT_POWER),
+ status_reg);
break;
case USB_PORT_FEAT_C_CONNECTION:
- writel((temp & ~PORT_RWC_BITS) | PORT_CSC,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_CSC,
+ status_reg);
break;
case USB_PORT_FEAT_C_OVER_CURRENT:
- writel((temp & ~PORT_RWC_BITS) | PORT_OCC,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, (temp & ~PORT_RWC_BITS) | PORT_OCC,
+ status_reg);
break;
case USB_PORT_FEAT_C_RESET:
/* GetPortStatus clears reset */
default:
goto error;
}
- readl (&ehci->regs->command); /* unblock posted write */
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted write */
break;
case GetHubDescriptor:
ehci_hub_descriptor (ehci, (struct usb_hub_descriptor *)
goto error;
wIndex--;
status = 0;
- temp = readl (&ehci->regs->port_status [wIndex]);
+ temp = ehci_readl(ehci, status_reg);
// wPortChange bits
if (temp & PORT_CSC)
status |= 1 << USB_PORT_FEAT_C_OVER_CURRENT;
/* whoever resumes must GetPortStatus to complete it!! */
- if ((temp & PORT_RESUME)
- && time_after (jiffies,
- ehci->reset_done [wIndex])) {
- status |= 1 << USB_PORT_FEAT_C_SUSPEND;
- ehci->reset_done [wIndex] = 0;
+ if (temp & PORT_RESUME) {
- /* stop resume signaling */
- temp = readl (&ehci->regs->port_status [wIndex]);
- writel (temp & ~(PORT_RWC_BITS | PORT_RESUME),
- &ehci->regs->port_status [wIndex]);
- retval = handshake (
- &ehci->regs->port_status [wIndex],
- PORT_RESUME, 0, 2000 /* 2msec */);
- if (retval != 0) {
- ehci_err (ehci, "port %d resume error %d\n",
- wIndex + 1, retval);
- goto error;
+ /* Remote Wakeup received? */
+ if (!ehci->reset_done[wIndex]) {
+ /* resume signaling for 20 msec */
+ ehci->reset_done[wIndex] = jiffies
+ + msecs_to_jiffies(20);
+ /* check the port again */
+ mod_timer(&ehci_to_hcd(ehci)->rh_timer,
+ ehci->reset_done[wIndex]);
+ }
+
+ /* resume completed? */
+ else if (time_after_eq(jiffies,
+ ehci->reset_done[wIndex])) {
+ status |= 1 << USB_PORT_FEAT_C_SUSPEND;
+ ehci->reset_done[wIndex] = 0;
+
+ /* stop resume signaling */
+ temp = ehci_readl(ehci, status_reg);
+ ehci_writel(ehci,
+ temp & ~(PORT_RWC_BITS | PORT_RESUME),
+ status_reg);
+ retval = handshake(ehci, status_reg,
+ PORT_RESUME, 0, 2000 /* 2msec */);
+ if (retval != 0) {
+ ehci_err(ehci,
+ "port %d resume error %d\n",
+ wIndex + 1, retval);
+ goto error;
+ }
+ temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
}
- temp &= ~(PORT_SUSPEND|PORT_RESUME|(3<<10));
}
/* whoever resets must GetPortStatus to complete it!! */
if ((temp & PORT_RESET)
- && time_after (jiffies,
- ehci->reset_done [wIndex])) {
+ && time_after_eq(jiffies,
+ ehci->reset_done[wIndex])) {
status |= 1 << USB_PORT_FEAT_C_RESET;
ehci->reset_done [wIndex] = 0;
/* force reset to complete */
- writel (temp & ~(PORT_RWC_BITS | PORT_RESET),
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp & ~(PORT_RWC_BITS | PORT_RESET),
+ status_reg);
/* REVISIT: some hardware needs 550+ usec to clear
* this bit; seems too long to spin routinely...
*/
- retval = handshake (
- &ehci->regs->port_status [wIndex],
+ retval = handshake(ehci, status_reg,
PORT_RESET, 0, 750);
if (retval != 0) {
ehci_err (ehci, "port %d reset error %d\n",
}
/* see what we found out */
- temp = check_reset_complete (ehci, wIndex,
- readl (&ehci->regs->port_status [wIndex]));
+ temp = check_reset_complete (ehci, wIndex, status_reg,
+ ehci_readl(ehci, status_reg));
}
- // don't show wPortStatus if it's owned by a companion hc
- if (!(temp & PORT_OWNER)) {
- if (temp & PORT_CONNECT) {
- status |= 1 << USB_PORT_FEAT_CONNECTION;
- // status may be from integrated TT
- status |= ehci_port_speed(ehci, temp);
- }
- if (temp & PORT_PE)
- status |= 1 << USB_PORT_FEAT_ENABLE;
- if (temp & (PORT_SUSPEND|PORT_RESUME))
- status |= 1 << USB_PORT_FEAT_SUSPEND;
- if (temp & PORT_OC)
- status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
- if (temp & PORT_RESET)
- status |= 1 << USB_PORT_FEAT_RESET;
- if (temp & PORT_POWER)
- status |= 1 << USB_PORT_FEAT_POWER;
+ /* transfer dedicated ports to the companion hc */
+ if ((temp & PORT_CONNECT) &&
+ test_bit(wIndex, &ehci->companion_ports)) {
+ temp &= ~PORT_RWC_BITS;
+ temp |= PORT_OWNER;
+ ehci_writel(ehci, temp, status_reg);
+ ehci_dbg(ehci, "port %d --> companion\n", wIndex + 1);
+ temp = ehci_readl(ehci, status_reg);
+ }
+
+ /*
+ * Even if OWNER is set, there's no harm letting khubd
+ * see the wPortStatus values (they should all be 0 except
+ * for PORT_POWER anyway).
+ */
+
+ if (temp & PORT_CONNECT) {
+ status |= 1 << USB_PORT_FEAT_CONNECTION;
+ // status may be from integrated TT
+ status |= ehci_port_speed(ehci, temp);
}
+ if (temp & PORT_PE)
+ status |= 1 << USB_PORT_FEAT_ENABLE;
+ if (temp & (PORT_SUSPEND|PORT_RESUME))
+ status |= 1 << USB_PORT_FEAT_SUSPEND;
+ if (temp & PORT_OC)
+ status |= 1 << USB_PORT_FEAT_OVER_CURRENT;
+ if (temp & PORT_RESET)
+ status |= 1 << USB_PORT_FEAT_RESET;
+ if (temp & PORT_POWER)
+ status |= 1 << USB_PORT_FEAT_POWER;
#ifndef EHCI_VERBOSE_DEBUG
if (status & ~0xffff) /* only if wPortChange is interesting */
if (!wIndex || wIndex > ports)
goto error;
wIndex--;
- temp = readl (&ehci->regs->port_status [wIndex]);
+ temp = ehci_readl(ehci, status_reg);
if (temp & PORT_OWNER)
break;
goto error;
if (device_may_wakeup(&hcd->self.root_hub->dev))
temp |= PORT_WAKE_BITS;
- writel (temp | PORT_SUSPEND,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp | PORT_SUSPEND, status_reg);
break;
case USB_PORT_FEAT_POWER:
if (HCS_PPC (ehci->hcs_params))
- writel (temp | PORT_POWER,
- &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp | PORT_POWER,
+ status_reg);
break;
case USB_PORT_FEAT_RESET:
if (temp & PORT_RESUME)
ehci->reset_done [wIndex] = jiffies
+ msecs_to_jiffies (50);
}
- writel (temp, &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp, status_reg);
break;
/* For downstream facing ports (these): one hub port is put
ehci_quiesce(ehci);
ehci_halt(ehci);
temp |= selector << 16;
- writel (temp, &ehci->regs->port_status [wIndex]);
+ ehci_writel(ehci, temp, status_reg);
break;
default:
goto error;
}
- readl (&ehci->regs->command); /* unblock posted writes */
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
break;
default:
if ((temp & (3 << 13)) == (1 << 13)) {
temp &= 0x1fff;
ehci->debug = ehci_to_hcd(ehci)->regs + temp;
- temp = readl(&ehci->debug->control);
+ temp = ehci_readl(ehci, &ehci->debug->control);
ehci_info(ehci, "debug port %d%s\n",
HCS_DEBUG_PORT(ehci->hcs_params),
(temp & DBGP_ENABLED)
u32 temp;
int retval;
+ switch (pdev->vendor) {
+ case PCI_VENDOR_ID_TOSHIBA_2:
+ /* celleb's companion chip */
+ if (pdev->device == 0x01b5) {
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ ehci->big_endian_mmio = 1;
+#else
+ ehci_warn(ehci,
+ "unsupported big endian Toshiba quirk\n");
+#endif
+ }
+ break;
+ }
+
ehci->caps = hcd->regs;
- ehci->regs = hcd->regs + HC_LENGTH(readl(&ehci->caps->hc_capbase));
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+
dbg_hcs_params(ehci, "reset");
dbg_hcc_params(ehci, "reset");
}
/* cache this readonly data; minimize chip reads */
- ehci->hcs_params = readl(&ehci->caps->hcs_params);
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
retval = ehci_halt(ehci);
if (retval)
rc = -EINVAL;
goto bail;
}
- writel (0, &ehci->regs->intr_enable);
- (void)readl(&ehci->regs->intr_enable);
+ ehci_writel(ehci, 0, &ehci->regs->intr_enable);
+ (void)ehci_readl(ehci, &ehci->regs->intr_enable);
/* make sure snapshot being resumed re-enumerates everything */
if (message.event == PM_EVENT_PRETHAW) {
/* If CF is still set, we maintained PCI Vaux power.
* Just undo the effect of ehci_pci_suspend().
*/
- if (readl(&ehci->regs->configured_flag) == FLAG_CF) {
+ if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF) {
int mask = INTR_MASK;
if (!device_may_wakeup(&hcd->self.root_hub->dev))
mask &= ~STS_PCD;
- writel(mask, &ehci->regs->intr_enable);
- readl(&ehci->regs->intr_enable);
+ ehci_writel(ehci, mask, &ehci->regs->intr_enable);
+ ehci_readl(ehci, &ehci->regs->intr_enable);
return 0;
}
/* here we "know" root ports should always stay powered */
ehci_port_power(ehci, 1);
- writel(ehci->command, &ehci->regs->command);
- writel(FLAG_CF, &ehci->regs->configured_flag);
- readl(&ehci->regs->command); /* unblock posted writes */
+ ehci_writel(ehci, ehci->command, &ehci->regs->command);
+ ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
+ ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
hcd->state = HC_STATE_SUSPENDED;
return 0;
--- /dev/null
+/*
+ * PS3 EHCI Host Controller driver
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/ps3.h>
+
+static int ps3_ehci_hc_reset(struct usb_hcd *hcd)
+{
+ int result;
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+
+ ehci->big_endian_mmio = 1;
+
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs + HC_LENGTH(ehci_readl(ehci,
+ &ehci->caps->hc_capbase));
+
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ result = ehci_halt(ehci);
+
+ if (result)
+ return result;
+
+ result = ehci_init(hcd);
+
+ if (result)
+ return result;
+
+ ehci_port_power(ehci, 0);
+
+ return result;
+}
+
+static const struct hc_driver ps3_ehci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "PS3 EHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+ .reset = ps3_ehci_hc_reset,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+ .get_frame_number = ehci_get_frame,
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+#if defined(CONFIG_PM)
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+#endif
+};
+
+#if !defined(DEBUG)
+#undef dev_dbg
+static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
+ const struct device *_dev, const char *fmt, ...) {return 0;}
+#endif
+
+
+static int ps3_ehci_sb_probe(struct ps3_system_bus_device *dev)
+{
+ int result;
+ struct usb_hcd *hcd;
+ unsigned int virq;
+ static u64 dummy_mask = DMA_32BIT_MASK;
+
+ if (usb_disabled()) {
+ result = -ENODEV;
+ goto fail_start;
+ }
+
+ result = ps3_mmio_region_create(dev->m_region);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
+ __func__, __LINE__);
+ result = -EPERM;
+ goto fail_mmio;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
+ __LINE__, dev->m_region->lpar_addr);
+
+ result = ps3_alloc_io_irq(dev->interrupt_id, &virq);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
+ __func__, __LINE__, virq);
+ result = -EPERM;
+ goto fail_irq;
+ }
+
+ dev->core.power.power_state = PMSG_ON;
+ dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
+
+ hcd = usb_create_hcd(&ps3_ehci_hc_driver, &dev->core, dev->core.bus_id);
+
+ if (!hcd) {
+ dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
+ __LINE__);
+ result = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ hcd->rsrc_start = dev->m_region->lpar_addr;
+ hcd->rsrc_len = dev->m_region->len;
+ hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
+
+ if (!hcd->regs) {
+ dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
+ __LINE__);
+ result = -EPERM;
+ goto fail_ioremap;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->rsrc_start);
+ dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->rsrc_len);
+ dev_dbg(&dev->core, "%s:%d: hcd->regs %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->regs);
+ dev_dbg(&dev->core, "%s:%d: virq %lu\n", __func__, __LINE__,
+ (unsigned long)virq);
+
+ ps3_system_bus_set_driver_data(dev, hcd);
+
+ result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_add_hcd;
+ }
+
+ return result;
+
+fail_add_hcd:
+ iounmap(hcd->regs);
+fail_ioremap:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ ps3_free_io_irq(virq);
+fail_irq:
+ ps3_free_mmio_region(dev->m_region);
+fail_mmio:
+fail_start:
+ return result;
+}
+
+static int ps3_ehci_sb_remove(struct ps3_system_bus_device *dev)
+{
+ struct usb_hcd *hcd =
+ (struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+
+ usb_put_hcd(hcd);
+ ps3_system_bus_set_driver_data(dev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("ps3-ehci");
+
+static struct ps3_system_bus_driver ps3_ehci_sb_driver = {
+ .match_id = PS3_MATCH_ID_EHCI,
+ .core = {
+ .name = "ps3-ehci-driver",
+ },
+ .probe = ps3_ehci_sb_probe,
+ .remove = ps3_ehci_sb_remove,
+};
head = ehci->async;
timer_action_done (ehci, TIMER_ASYNC_OFF);
if (!head->qh_next.qh) {
- u32 cmd = readl (&ehci->regs->command);
+ u32 cmd = ehci_readl(ehci, &ehci->regs->command);
if (!(cmd & CMD_ASE)) {
/* in case a clear of CMD_ASE didn't take yet */
- (void) handshake (&ehci->regs->status, STS_ASS, 0, 150);
+ (void)handshake(ehci, &ehci->regs->status,
+ STS_ASS, 0, 150);
cmd |= CMD_ASE | CMD_RUN;
- writel (cmd, &ehci->regs->command);
+ ehci_writel(ehci, cmd, &ehci->regs->command);
ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
/* posted write need not be known to HC yet ... */
}
static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh)
{
- int cmd = readl (&ehci->regs->command);
+ int cmd = ehci_readl(ehci, &ehci->regs->command);
struct ehci_qh *prev;
#ifdef DEBUG
if (ehci_to_hcd(ehci)->state != HC_STATE_HALT
&& !ehci->reclaim) {
/* ... and CMD_IAAD clear */
- writel (cmd & ~CMD_ASE, &ehci->regs->command);
+ ehci_writel(ehci, cmd & ~CMD_ASE,
+ &ehci->regs->command);
wmb ();
// handshake later, if we need to
timer_action_done (ehci, TIMER_ASYNC_OFF);
ehci->reclaim_ready = 0;
cmd |= CMD_IAAD;
- writel (cmd, &ehci->regs->command);
- (void) readl (&ehci->regs->command);
+ ehci_writel(ehci, cmd, &ehci->regs->command);
+ (void)ehci_readl(ehci, &ehci->regs->command);
timer_action (ehci, TIMER_IAA_WATCHDOG);
}
/* did clearing PSE did take effect yet?
* takes effect only at frame boundaries...
*/
- status = handshake (&ehci->regs->status, STS_PSS, 0, 9 * 125);
+ status = handshake(ehci, &ehci->regs->status, STS_PSS, 0, 9 * 125);
if (status != 0) {
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
return status;
}
- cmd = readl (&ehci->regs->command) | CMD_PSE;
- writel (cmd, &ehci->regs->command);
+ cmd = ehci_readl(ehci, &ehci->regs->command) | CMD_PSE;
+ ehci_writel(ehci, cmd, &ehci->regs->command);
/* posted write ... PSS happens later */
ehci_to_hcd(ehci)->state = HC_STATE_RUNNING;
/* make sure ehci_work scans these */
- ehci->next_uframe = readl (&ehci->regs->frame_index)
- % (ehci->periodic_size << 3);
+ ehci->next_uframe = ehci_readl(ehci, &ehci->regs->frame_index)
+ % (ehci->periodic_size << 3);
return 0;
}
/* did setting PSE not take effect yet?
* takes effect only at frame boundaries...
*/
- status = handshake (&ehci->regs->status, STS_PSS, STS_PSS, 9 * 125);
+ status = handshake(ehci, &ehci->regs->status, STS_PSS, STS_PSS, 9 * 125);
if (status != 0) {
ehci_to_hcd(ehci)->state = HC_STATE_HALT;
return status;
}
- cmd = readl (&ehci->regs->command) & ~CMD_PSE;
- writel (cmd, &ehci->regs->command);
+ cmd = ehci_readl(ehci, &ehci->regs->command) & ~CMD_PSE;
+ ehci_writel(ehci, cmd, &ehci->regs->command);
/* posted write ... */
ehci->next_uframe = -1;
goto fail;
}
- now = readl (&ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
/* when's the last uframe this urb could start? */
max = now + mod;
*/
now_uframe = ehci->next_uframe;
if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
- clock = readl (&ehci->regs->frame_index);
+ clock = ehci_readl(ehci, &ehci->regs->frame_index);
else
clock = now_uframe + mod - 1;
clock %= mod;
if (!HC_IS_RUNNING (ehci_to_hcd(ehci)->state))
break;
ehci->next_uframe = now_uframe;
- now = readl (&ehci->regs->frame_index) % mod;
+ now = ehci_readl(ehci, &ehci->regs->frame_index) % mod;
if (now_uframe == now)
break;
/* per root hub port */
unsigned long reset_done [EHCI_MAX_ROOT_PORTS];
- unsigned long bus_suspended;
+ /* bit vectors (one bit per port) */
+ unsigned long bus_suspended; /* which ports were
+ already suspended at the start of a bus suspend */
+ unsigned long companion_ports; /* which ports are
+ dedicated to the companion controller */
/* per-HC memory pools (could be per-bus, but ...) */
struct dma_pool *qh_pool; /* qh per active urb */
unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */
unsigned no_selective_suspend:1;
unsigned has_fsl_port_bug:1; /* FreeScale */
+ unsigned big_endian_mmio:1;
u8 sbrn; /* packed release number */
#define ehci_has_fsl_portno_bug(e) (0)
#endif
+/*
+ * While most USB host controllers implement their registers in
+ * little-endian format, a minority (celleb companion chip) implement
+ * them in big endian format.
+ *
+ * This attempts to support either format at compile time without a
+ * runtime penalty, or both formats with the additional overhead
+ * of checking a flag bit.
+ */
+
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+#define ehci_big_endian_mmio(e) ((e)->big_endian_mmio)
+#else
+#define ehci_big_endian_mmio(e) 0
+#endif
+
+static inline unsigned int ehci_readl (const struct ehci_hcd *ehci,
+ __u32 __iomem * regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ return ehci_big_endian_mmio(ehci) ?
+ readl_be((__force u32 *)regs) :
+ readl((__force u32 *)regs);
+#else
+ return readl((__force u32 *)regs);
+#endif
+}
+
+static inline void ehci_writel (const struct ehci_hcd *ehci,
+ const unsigned int val, __u32 __iomem *regs)
+{
+#ifdef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO
+ ehci_big_endian_mmio(ehci) ?
+ writel_be(val, (__force u32 *)regs) :
+ writel(val, (__force u32 *)regs);
+#else
+ writel(val, (__force u32 *)regs);
+#endif
+}
/*-------------------------------------------------------------------------*/
at91_stop_hc(pdev);
iounmap(hcd->regs);
release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
- disable_irq_wake(hcd->irq);
clk_put(fclk);
clk_put(iclk);
if (device_may_wakeup(&pdev->dev))
enable_irq_wake(hcd->irq);
- else
- disable_irq_wake(hcd->irq);
/*
* The integrated transceivers seem unable to notice disconnect,
static int ohci_hcd_at91_drv_resume(struct platform_device *pdev)
{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ if (device_may_wakeup(&pdev->dev))
+ disable_irq_wake(hcd->irq);
+
if (!clocked) {
clk_enable(iclk);
clk_enable(fclk);
},
};
-static int __init ohci_hcd_at91_init (void)
-{
- if (usb_disabled())
- return -ENODEV;
-
- return platform_driver_register(&ohci_hcd_at91_driver);
-}
-
-static void __exit ohci_hcd_at91_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_at91_driver);
-}
-
-module_init (ohci_hcd_at91_init);
-module_exit (ohci_hcd_at91_cleanup);
},
};
-static int __init ohci_hcd_au1xxx_init (void)
-{
- pr_debug (DRIVER_INFO " (Au1xxx)");
- pr_debug ("block sizes: ed %d td %d\n",
- sizeof (struct ed), sizeof (struct td));
-
- return platform_driver_register(&ohci_hcd_au1xxx_driver);
-}
-
-static void __exit ohci_hcd_au1xxx_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_au1xxx_driver);
-}
-
-module_init (ohci_hcd_au1xxx_init);
-module_exit (ohci_hcd_au1xxx_cleanup);
},
};
-static int __init ohci_hcd_ep93xx_init(void)
-{
- return platform_driver_register(&ohci_hcd_ep93xx_driver);
-}
-
-static void __exit ohci_hcd_ep93xx_cleanup(void)
-{
- platform_driver_unregister(&ohci_hcd_ep93xx_driver);
-}
-
-module_init(ohci_hcd_ep93xx_init);
-module_exit(ohci_hcd_ep93xx_cleanup);
#ifdef CONFIG_PCI
#include "ohci-pci.c"
+#define PCI_DRIVER ohci_pci_driver
#endif
#ifdef CONFIG_SA1111
#include "ohci-sa1111.c"
+#define SA1111_DRIVER ohci_hcd_sa1111_driver
#endif
#ifdef CONFIG_ARCH_S3C2410
#include "ohci-s3c2410.c"
+#define PLATFORM_DRIVER ohci_hcd_s3c2410_driver
#endif
#ifdef CONFIG_ARCH_OMAP
#include "ohci-omap.c"
+#define PLATFORM_DRIVER ohci_hcd_omap_driver
#endif
#ifdef CONFIG_ARCH_LH7A404
#include "ohci-lh7a404.c"
+#define PLATFORM_DRIVER ohci_hcd_lh7a404_driver
#endif
#ifdef CONFIG_PXA27x
#include "ohci-pxa27x.c"
+#define PLATFORM_DRIVER ohci_hcd_pxa27x_driver
#endif
#ifdef CONFIG_ARCH_EP93XX
#include "ohci-ep93xx.c"
+#define PLATFORM_DRIVER ohci_hcd_ep93xx_driver
#endif
#ifdef CONFIG_SOC_AU1X00
#include "ohci-au1xxx.c"
+#define PLATFORM_DRIVER ohci_hcd_au1xxx_driver
#endif
#ifdef CONFIG_PNX8550
#include "ohci-pnx8550.c"
+#define PLATFORM_DRIVER ohci_hcd_pnx8550_driver
#endif
#ifdef CONFIG_USB_OHCI_HCD_PPC_SOC
#include "ohci-ppc-soc.c"
+#define PLATFORM_DRIVER ohci_hcd_ppc_soc_driver
#endif
#ifdef CONFIG_ARCH_AT91
#include "ohci-at91.c"
+#define PLATFORM_DRIVER ohci_hcd_at91_driver
#endif
#ifdef CONFIG_ARCH_PNX4008
#include "ohci-pnx4008.c"
+#define PLATFORM_DRIVER usb_hcd_pnx4008_driver
#endif
-#if !(defined(CONFIG_PCI) \
- || defined(CONFIG_SA1111) \
- || defined(CONFIG_ARCH_S3C2410) \
- || defined(CONFIG_ARCH_OMAP) \
- || defined (CONFIG_ARCH_LH7A404) \
- || defined (CONFIG_PXA27x) \
- || defined (CONFIG_ARCH_EP93XX) \
- || defined (CONFIG_SOC_AU1X00) \
- || defined (CONFIG_USB_OHCI_HCD_PPC_SOC) \
- || defined (CONFIG_ARCH_AT91) \
- || defined (CONFIG_ARCH_PNX4008) \
- )
+
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF
+#include "ohci-ppc-of.c"
+#define OF_PLATFORM_DRIVER ohci_hcd_ppc_of_driver
+#endif
+
+#ifdef CONFIG_PPC_PS3
+#include "ohci-ps3.c"
+#define PS3_SYSTEM_BUS_DRIVER ps3_ohci_sb_driver
+#endif
+
+#if !defined(PCI_DRIVER) && \
+ !defined(PLATFORM_DRIVER) && \
+ !defined(OF_PLATFORM_DRIVER) && \
+ !defined(SA1111_DRIVER) && \
+ !defined(PS3_SYSTEM_BUS_DRIVER)
#error "missing bus glue for ohci-hcd"
#endif
+
+static int __init ohci_hcd_mod_init(void)
+{
+ int retval = 0;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ printk (KERN_DEBUG "%s: " DRIVER_INFO "\n", hcd_name);
+ pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
+ sizeof (struct ed), sizeof (struct td));
+
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ retval = ps3_system_bus_driver_register(&PS3_SYSTEM_BUS_DRIVER);
+ if (retval < 0)
+ goto error_ps3;
+#endif
+
+#ifdef PLATFORM_DRIVER
+ retval = platform_driver_register(&PLATFORM_DRIVER);
+ if (retval < 0)
+ goto error_platform;
+#endif
+
+#ifdef OF_PLATFORM_DRIVER
+ retval = of_register_platform_driver(&OF_PLATFORM_DRIVER);
+ if (retval < 0)
+ goto error_of_platform;
+#endif
+
+#ifdef SA1111_DRIVER
+ retval = sa1111_driver_register(&SA1111_DRIVER);
+ if (retval < 0)
+ goto error_sa1111;
+#endif
+
+#ifdef PCI_DRIVER
+ retval = pci_register_driver(&PCI_DRIVER);
+ if (retval < 0)
+ goto error_pci;
+#endif
+
+ return retval;
+
+ /* Error path */
+#ifdef PCI_DRIVER
+ error_pci:
+#endif
+#ifdef SA1111_DRIVER
+ sa1111_driver_unregister(&SA1111_DRIVER);
+ error_sa1111:
+#endif
+#ifdef OF_PLATFORM_DRIVER
+ of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+ error_of_platform:
+#endif
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+ error_platform:
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+ error_ps3:
+#endif
+ return retval;
+}
+module_init(ohci_hcd_mod_init);
+
+static void __exit ohci_hcd_mod_exit(void)
+{
+#ifdef PCI_DRIVER
+ pci_unregister_driver(&PCI_DRIVER);
+#endif
+#ifdef SA1111_DRIVER
+ sa1111_driver_unregister(&SA1111_DRIVER);
+#endif
+#ifdef OF_PLATFORM_DRIVER
+ of_unregister_platform_driver(&OF_PLATFORM_DRIVER);
+#endif
+#ifdef PLATFORM_DRIVER
+ platform_driver_unregister(&PLATFORM_DRIVER);
+#endif
+#ifdef PS3_SYSTEM_BUS_DRIVER
+ ps3_system_bus_driver_unregister(&PS3_SYSTEM_BUS_DRIVER);
+#endif
+}
+module_exit(ohci_hcd_mod_exit);
+
},
};
-static int __init ohci_hcd_lh7a404_init (void)
-{
- pr_debug (DRIVER_INFO " (LH7A404)");
- pr_debug ("block sizes: ed %d td %d\n",
- sizeof (struct ed), sizeof (struct td));
-
- return platform_driver_register(&ohci_hcd_lh7a404_driver);
-}
-
-static void __exit ohci_hcd_lh7a404_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_lh7a404_driver);
-}
-
-module_init (ohci_hcd_lh7a404_init);
-module_exit (ohci_hcd_lh7a404_cleanup);
},
};
-static int __init ohci_hcd_omap_init (void)
-{
- printk (KERN_DEBUG "%s: " DRIVER_INFO " (OMAP)\n", hcd_name);
- if (usb_disabled())
- return -ENODEV;
-
- pr_debug("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
- sizeof (struct ed), sizeof (struct td));
-
- return platform_driver_register(&ohci_hcd_omap_driver);
-}
-
-static void __exit ohci_hcd_omap_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_omap_driver);
-}
-
-module_init (ohci_hcd_omap_init);
-module_exit (ohci_hcd_omap_cleanup);
/*-------------------------------------------------------------------------*/
-static int
-ohci_pci_reset (struct usb_hcd *hcd)
+/* AMD 756, for most chips (early revs), corrupts register
+ * values on read ... so enable the vendor workaround.
+ */
+static int __devinit ohci_quirk_amd756(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- ohci_hcd_init (ohci);
- return ohci_init (ohci);
+ ohci->flags = OHCI_QUIRK_AMD756;
+ ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
+
+ /* also erratum 10 (suspend/resume issues) */
+ device_init_wakeup(&hcd->self.root_hub->dev, 0);
+
+ return 0;
}
-static int __devinit
-ohci_pci_start (struct usb_hcd *hcd)
+/* Apple's OHCI driver has a lot of bizarre workarounds
+ * for this chip. Evidently control and bulk lists
+ * can get confused. (B&W G3 models, and ...)
+ */
+static int __devinit ohci_quirk_opti(struct usb_hcd *hcd)
{
struct ohci_hcd *ohci = hcd_to_ohci (hcd);
- int ret;
- /* REVISIT this whole block should move to reset(), which handles
- * all the other one-time init.
+ ohci_dbg (ohci, "WARNING: OPTi workarounds unavailable\n");
+
+ return 0;
+}
+
+/* Check for NSC87560. We have to look at the bridge (fn1) to
+ * identify the USB (fn2). This quirk might apply to more or
+ * even all NSC stuff.
+ */
+static int __devinit ohci_quirk_ns(struct usb_hcd *hcd)
+{
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ struct pci_dev *b;
+
+ b = pci_get_slot (pdev->bus, PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
+ if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
+ && b->vendor == PCI_VENDOR_ID_NS) {
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_SUPERIO;
+ ohci_dbg (ohci, "Using NSC SuperIO setup\n");
+ }
+ pci_dev_put(b);
+
+ return 0;
+}
+
+/* Check for Compaq's ZFMicro chipset, which needs short
+ * delays before control or bulk queues get re-activated
+ * in finish_unlinks()
+ */
+static int __devinit ohci_quirk_zfmicro(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ ohci->flags |= OHCI_QUIRK_ZFMICRO;
+ ohci_dbg (ohci, "enabled Compaq ZFMicro chipset quirk\n");
+
+ return 0;
+}
+
+/* Check for Toshiba SCC OHCI which has big endian registers
+ * and little endian in memory data structures
+ */
+static int __devinit ohci_quirk_toshiba_scc(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+
+ /* That chip is only present in the southbridge of some
+ * cell based platforms which are supposed to select
+ * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO. We verify here if
+ * that was the case though.
+ */
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
+ ohci_dbg (ohci, "enabled big endian Toshiba quirk\n");
+ return 0;
+#else
+ ohci_err (ohci, "unsupported big endian Toshiba quirk\n");
+ return -ENXIO;
+#endif
+}
+
+/* List of quirks for OHCI */
+static const struct pci_device_id ohci_pci_quirks[] = {
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x740c),
+ .driver_data = (unsigned long)ohci_quirk_amd756,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_OPTI, 0xc861),
+ .driver_data = (unsigned long)ohci_quirk_opti,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_ANY_ID),
+ .driver_data = (unsigned long)ohci_quirk_ns,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xa0f8),
+ .driver_data = (unsigned long)ohci_quirk_zfmicro,
+ },
+ {
+ PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, 0x01b6),
+ .driver_data = (unsigned long)ohci_quirk_toshiba_scc,
+ },
+ /* FIXME for some of the early AMD 760 southbridges, OHCI
+ * won't work at all. blacklist them.
*/
+
+ {},
+};
+
+static int ohci_pci_reset (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret = 0;
+
if (hcd->self.controller) {
struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
+ const struct pci_device_id *quirk_id;
- /* AMD 756, for most chips (early revs), corrupts register
- * values on read ... so enable the vendor workaround.
- */
- if (pdev->vendor == PCI_VENDOR_ID_AMD
- && pdev->device == 0x740c) {
- ohci->flags = OHCI_QUIRK_AMD756;
- ohci_dbg (ohci, "AMD756 erratum 4 workaround\n");
- /* also erratum 10 (suspend/resume issues) */
- device_init_wakeup(&hcd->self.root_hub->dev, 0);
+ quirk_id = pci_match_id(ohci_pci_quirks, pdev);
+ if (quirk_id != NULL) {
+ int (*quirk)(struct usb_hcd *ohci);
+ quirk = (void *)quirk_id->driver_data;
+ ret = quirk(hcd);
}
+ }
+ if (ret == 0) {
+ ohci_hcd_init (ohci);
+ return ohci_init (ohci);
+ }
+ return ret;
+}
- /* FIXME for some of the early AMD 760 southbridges, OHCI
- * won't work at all. blacklist them.
- */
-
- /* Apple's OHCI driver has a lot of bizarre workarounds
- * for this chip. Evidently control and bulk lists
- * can get confused. (B&W G3 models, and ...)
- */
- else if (pdev->vendor == PCI_VENDOR_ID_OPTI
- && pdev->device == 0xc861) {
- ohci_dbg (ohci,
- "WARNING: OPTi workarounds unavailable\n");
- }
- /* Check for NSC87560. We have to look at the bridge (fn1) to
- * identify the USB (fn2). This quirk might apply to more or
- * even all NSC stuff.
- */
- else if (pdev->vendor == PCI_VENDOR_ID_NS) {
- struct pci_dev *b;
-
- b = pci_get_slot (pdev->bus,
- PCI_DEVFN (PCI_SLOT (pdev->devfn), 1));
- if (b && b->device == PCI_DEVICE_ID_NS_87560_LIO
- && b->vendor == PCI_VENDOR_ID_NS) {
- ohci->flags |= OHCI_QUIRK_SUPERIO;
- ohci_dbg (ohci, "Using NSC SuperIO setup\n");
- }
- pci_dev_put(b);
- }
+static int __devinit ohci_pci_start (struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci (hcd);
+ int ret;
- /* Check for Compaq's ZFMicro chipset, which needs short
- * delays before control or bulk queues get re-activated
- * in finish_unlinks()
- */
- else if (pdev->vendor == PCI_VENDOR_ID_COMPAQ
- && pdev->device == 0xa0f8) {
- ohci->flags |= OHCI_QUIRK_ZFMICRO;
- ohci_dbg (ohci,
- "enabled Compaq ZFMicro chipset quirk\n");
- }
+#ifdef CONFIG_PM /* avoid warnings about unused pdev */
+ if (hcd->self.controller) {
+ struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
/* RWC may not be set for add-in PCI cards, since boot
* firmware probably ignored them. This transfers PCI
if (device_may_wakeup(&pdev->dev))
ohci->hc_control |= OHCI_CTRL_RWC;
}
+#endif /* CONFIG_PM */
- /* NOTE: there may have already been a first reset, to
- * keep bios/smm irqs from making trouble
- */
- if ((ret = ohci_run (ohci)) < 0) {
+ ret = ohci_run (ohci);
+ if (ret < 0) {
ohci_err (ohci, "can't start\n");
ohci_stop (hcd);
- return ret;
}
- return 0;
+ return ret;
}
#ifdef CONFIG_PM
.shutdown = usb_hcd_pci_shutdown,
};
-
-static int __init ohci_hcd_pci_init (void)
-{
- printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
- if (usb_disabled())
- return -ENODEV;
-
- pr_debug ("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
- sizeof (struct ed), sizeof (struct td));
- return pci_register_driver (&ohci_pci_driver);
-}
-module_init (ohci_hcd_pci_init);
-
-/*-------------------------------------------------------------------------*/
-
-static void __exit ohci_hcd_pci_cleanup (void)
-{
- pci_unregister_driver (&ohci_pci_driver);
-}
-module_exit (ohci_hcd_pci_cleanup);
.remove = usb_hcd_pnx4008_remove,
};
-static int __init usb_hcd_pnx4008_init(void)
-{
- return platform_driver_register(&usb_hcd_pnx4008_driver);
-}
-
-static void __exit usb_hcd_pnx4008_cleanup(void)
-{
- return platform_driver_unregister(&usb_hcd_pnx4008_driver);
-}
-
-module_init(usb_hcd_pnx4008_init);
-module_exit(usb_hcd_pnx4008_cleanup);
.remove = ohci_hcd_pnx8550_drv_remove,
};
-static int __init ohci_hcd_pnx8550_init (void)
-{
- pr_debug (DRIVER_INFO " (pnx8550)");
- pr_debug ("block sizes: ed %d td %d\n",
- sizeof (struct ed), sizeof (struct td));
-
- return platform_driver_register(&ohci_hcd_pnx8550_driver);
-}
-
-static void __exit ohci_hcd_pnx8550_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_pnx8550_driver);
-}
-
-module_init (ohci_hcd_pnx8550_init);
-module_exit (ohci_hcd_pnx8550_cleanup);
--- /dev/null
+/*
+ * OHCI HCD (Host Controller Driver) for USB.
+ *
+ * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
+ * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
+ * (C) Copyright 2002 Hewlett-Packard Company
+ * (C) Copyright 2006 Sylvain Munaut <tnt@246tNt.com>
+ *
+ * Bus glue for OHCI HC on the of_platform bus
+ *
+ * Modified for of_platform bus from ohci-sa1111.c
+ *
+ * This file is licenced under the GPL.
+ */
+
+#include <linux/signal.h>
+
+#include <asm/of_platform.h>
+#include <asm/prom.h>
+
+
+static int __devinit
+ohci_ppc_of_start(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+ int ret;
+
+ if ((ret = ohci_init(ohci)) < 0)
+ return ret;
+
+ if ((ret = ohci_run(ohci)) < 0) {
+ err("can't start %s", ohci_to_hcd(ohci)->self.bus_name);
+ ohci_stop(hcd);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct hc_driver ohci_ppc_of_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "OF OHCI",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+
+ /*
+ * generic hardware linkage
+ */
+ .irq = ohci_irq,
+ .flags = HCD_USB11 | HCD_MEMORY,
+
+ /*
+ * basic lifecycle operations
+ */
+ .start = ohci_ppc_of_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+
+ /*
+ * managing i/o requests and associated device resources
+ */
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+
+ /*
+ * scheduling support
+ */
+ .get_frame_number = ohci_get_frame,
+
+ /*
+ * root hub support
+ */
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+#ifdef CONFIG_PM
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+ .start_port_reset = ohci_start_port_reset,
+};
+
+
+static int __devinit
+ohci_hcd_ppc_of_probe(struct of_device *op, const struct of_device_id *match)
+{
+ struct device_node *dn = op->node;
+ struct usb_hcd *hcd;
+ struct ohci_hcd *ohci;
+ struct resource res;
+ int irq;
+
+ int rv;
+ int is_bigendian;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ is_bigendian =
+ device_is_compatible(dn, "ohci-bigendian") ||
+ device_is_compatible(dn, "ohci-be");
+
+ dev_dbg(&op->dev, "initializing PPC-OF USB Controller\n");
+
+ rv = of_address_to_resource(dn, 0, &res);
+ if (rv)
+ return rv;
+
+ hcd = usb_create_hcd(&ohci_ppc_of_hc_driver, &op->dev, "PPC-OF USB");
+ if (!hcd)
+ return -ENOMEM;
+
+ hcd->rsrc_start = res.start;
+ hcd->rsrc_len = res.end - res.start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
+ printk(KERN_ERR __FILE__ ": request_mem_region failed\n");
+ rv = -EBUSY;
+ goto err_rmr;
+ }
+
+ irq = irq_of_parse_and_map(dn, 0);
+ if (irq == NO_IRQ) {
+ printk(KERN_ERR __FILE__ ": irq_of_parse_and_map failed\n");
+ rv = -EBUSY;
+ goto err_irq;
+ }
+
+ hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
+ if (!hcd->regs) {
+ printk(KERN_ERR __FILE__ ": ioremap failed\n");
+ rv = -ENOMEM;
+ goto err_ioremap;
+ }
+
+ ohci = hcd_to_ohci(hcd);
+ if (is_bigendian)
+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
+
+ ohci_hcd_init(ohci);
+
+ rv = usb_add_hcd(hcd, irq, 0);
+ if (rv == 0)
+ return 0;
+
+ iounmap(hcd->regs);
+err_ioremap:
+ irq_dispose_mapping(irq);
+err_irq:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+err_rmr:
+ usb_put_hcd(hcd);
+
+ return rv;
+}
+
+static int ohci_hcd_ppc_of_remove(struct of_device *op)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+ dev_set_drvdata(&op->dev, NULL);
+
+ dev_dbg(&op->dev, "stopping PPC-OF USB Controller\n");
+
+ usb_remove_hcd(hcd);
+
+ iounmap(hcd->regs);
+ irq_dispose_mapping(hcd->irq);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+
+ usb_put_hcd(hcd);
+
+ return 0;
+}
+
+static int ohci_hcd_ppc_of_shutdown(struct of_device *op)
+{
+ struct usb_hcd *hcd = dev_get_drvdata(&op->dev);
+
+ if (hcd->driver->shutdown)
+ hcd->driver->shutdown(hcd);
+
+ return 0;
+}
+
+
+static struct of_device_id ohci_hcd_ppc_of_match[] = {
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_BE
+ {
+ .name = "usb",
+ .compatible = "ohci-bigendian",
+ },
+ {
+ .name = "usb",
+ .compatible = "ohci-be",
+ },
+#endif
+#ifdef CONFIG_USB_OHCI_HCD_PPC_OF_LE
+ {
+ .name = "usb",
+ .compatible = "ohci-littledian",
+ },
+ {
+ .name = "usb",
+ .compatible = "ohci-le",
+ },
+#endif
+ {},
+};
+MODULE_DEVICE_TABLE(of, ohci_hcd_ppc_of_match);
+
+#if !defined(CONFIG_USB_OHCI_HCD_PPC_OF_BE) && \
+ !defined(CONFIG_USB_OHCI_HCD_PPC_OF_LE)
+#error "No endianess selected for ppc-of-ohci"
+#endif
+
+
+static struct of_platform_driver ohci_hcd_ppc_of_driver = {
+ .name = "ppc-of-ohci",
+ .match_table = ohci_hcd_ppc_of_match,
+ .probe = ohci_hcd_ppc_of_probe,
+ .remove = ohci_hcd_ppc_of_remove,
+ .shutdown = ohci_hcd_ppc_of_shutdown,
+#ifdef CONFIG_PM
+ /*.suspend = ohci_hcd_ppc_soc_drv_suspend,*/
+ /*.resume = ohci_hcd_ppc_soc_drv_resume,*/
+#endif
+ .driver = {
+ .name = "ppc-of-ohci",
+ .owner = THIS_MODULE,
+ },
+};
+
}
ohci = hcd_to_ohci(hcd);
- ohci->flags |= OHCI_BIG_ENDIAN;
+ ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC;
ohci_hcd_init(ohci);
retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
},
};
-static int __init ohci_hcd_ppc_soc_init(void)
-{
- pr_debug(DRIVER_INFO " (PPC SOC)\n");
- pr_debug("block sizes: ed %d td %d\n", sizeof(struct ed),
- sizeof(struct td));
-
- return platform_driver_register(&ohci_hcd_ppc_soc_driver);
-}
-
-static void __exit ohci_hcd_ppc_soc_cleanup(void)
-{
- platform_driver_unregister(&ohci_hcd_ppc_soc_driver);
-}
-
-module_init(ohci_hcd_ppc_soc_init);
-module_exit(ohci_hcd_ppc_soc_cleanup);
--- /dev/null
+/*
+ * PS3 OHCI Host Controller driver
+ *
+ * Copyright (C) 2006 Sony Computer Entertainment Inc.
+ * Copyright 2006 Sony Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <asm/ps3.h>
+
+static int ps3_ohci_hc_reset(struct usb_hcd *hcd)
+{
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ ohci->flags |= OHCI_QUIRK_BE_MMIO;
+ ohci_hcd_init(ohci);
+ return ohci_init(ohci);
+}
+
+static int __devinit ps3_ohci_hc_start(struct usb_hcd *hcd)
+{
+ int result;
+ struct ohci_hcd *ohci = hcd_to_ohci(hcd);
+
+ /* Handle root hub init quirk in spider south bridge. */
+ /* Also set PwrOn2PwrGood to 0x7f (254ms). */
+
+ ohci_writel(ohci, 0x7f000000 | RH_A_PSM | RH_A_OCPM,
+ &ohci->regs->roothub.a);
+ ohci_writel(ohci, 0x00060000, &ohci->regs->roothub.b);
+
+ result = ohci_run(ohci);
+
+ if (result < 0) {
+ err("can't start %s", hcd->self.bus_name);
+ ohci_stop(hcd);
+ }
+
+ return result;
+}
+
+static const struct hc_driver ps3_ohci_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "PS3 OHCI Host Controller",
+ .hcd_priv_size = sizeof(struct ohci_hcd),
+ .irq = ohci_irq,
+ .flags = HCD_MEMORY | HCD_USB11,
+ .reset = ps3_ohci_hc_reset,
+ .start = ps3_ohci_hc_start,
+ .stop = ohci_stop,
+ .shutdown = ohci_shutdown,
+ .urb_enqueue = ohci_urb_enqueue,
+ .urb_dequeue = ohci_urb_dequeue,
+ .endpoint_disable = ohci_endpoint_disable,
+ .get_frame_number = ohci_get_frame,
+ .hub_status_data = ohci_hub_status_data,
+ .hub_control = ohci_hub_control,
+ .hub_irq_enable = ohci_rhsc_enable,
+ .start_port_reset = ohci_start_port_reset,
+#if defined(CONFIG_PM)
+ .bus_suspend = ohci_bus_suspend,
+ .bus_resume = ohci_bus_resume,
+#endif
+};
+
+/* redefine dev_dbg to do a syntax check */
+
+#if !defined(DEBUG)
+#undef dev_dbg
+static inline int __attribute__ ((format (printf, 2, 3))) dev_dbg(
+ const struct device *_dev, const char *fmt, ...) {return 0;}
+#endif
+
+static int ps3_ohci_sb_probe(struct ps3_system_bus_device *dev)
+{
+ int result;
+ struct usb_hcd *hcd;
+ unsigned int virq;
+ static u64 dummy_mask = DMA_32BIT_MASK;
+
+ if (usb_disabled()) {
+ result = -ENODEV;
+ goto fail_start;
+ }
+
+ result = ps3_mmio_region_create(dev->m_region);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_map_mmio_region failed\n",
+ __func__, __LINE__);
+ result = -EPERM;
+ goto fail_mmio;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: mmio mapped_addr %lxh\n", __func__,
+ __LINE__, dev->m_region->lpar_addr);
+
+ result = ps3_alloc_io_irq(dev->interrupt_id, &virq);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: ps3_construct_io_irq(%d) failed.\n",
+ __func__, __LINE__, virq);
+ result = -EPERM;
+ goto fail_irq;
+ }
+
+ dev->core.power.power_state = PMSG_ON;
+ dev->core.dma_mask = &dummy_mask; /* FIXME: for improper usb code */
+
+ hcd = usb_create_hcd(&ps3_ohci_hc_driver, &dev->core, dev->core.bus_id);
+
+ if (!hcd) {
+ dev_dbg(&dev->core, "%s:%d: usb_create_hcd failed\n", __func__,
+ __LINE__);
+ result = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ hcd->rsrc_start = dev->m_region->lpar_addr;
+ hcd->rsrc_len = dev->m_region->len;
+ hcd->regs = ioremap(dev->m_region->lpar_addr, dev->m_region->len);
+
+ if (!hcd->regs) {
+ dev_dbg(&dev->core, "%s:%d: ioremap failed\n", __func__,
+ __LINE__);
+ result = -EPERM;
+ goto fail_ioremap;
+ }
+
+ dev_dbg(&dev->core, "%s:%d: hcd->rsrc_start %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->rsrc_start);
+ dev_dbg(&dev->core, "%s:%d: hcd->rsrc_len %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->rsrc_len);
+ dev_dbg(&dev->core, "%s:%d: hcd->regs %lxh\n", __func__, __LINE__,
+ (unsigned long)hcd->regs);
+ dev_dbg(&dev->core, "%s:%d: virq %lu\n", __func__, __LINE__,
+ (unsigned long)virq);
+
+ ps3_system_bus_set_driver_data(dev, hcd);
+
+ result = usb_add_hcd(hcd, virq, IRQF_DISABLED);
+
+ if (result) {
+ dev_dbg(&dev->core, "%s:%d: usb_add_hcd failed (%d)\n",
+ __func__, __LINE__, result);
+ goto fail_add_hcd;
+ }
+
+ return result;
+
+fail_add_hcd:
+ iounmap(hcd->regs);
+fail_ioremap:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ ps3_free_io_irq(virq);
+fail_irq:
+ ps3_free_mmio_region(dev->m_region);
+fail_mmio:
+fail_start:
+ return result;
+}
+
+static int ps3_ohci_sb_remove (struct ps3_system_bus_device *dev)
+{
+ struct usb_hcd *hcd =
+ (struct usb_hcd *)ps3_system_bus_get_driver_data(dev);
+
+ usb_put_hcd(hcd);
+ ps3_system_bus_set_driver_data(dev, NULL);
+
+ return 0;
+}
+
+MODULE_ALIAS("ps3-ohci");
+
+static struct ps3_system_bus_driver ps3_ohci_sb_driver = {
+ .match_id = PS3_MATCH_ID_OHCI,
+ .core = {
+ .name = "ps3-ohci-driver",
+ },
+ .probe = ps3_ohci_sb_probe,
+ .remove = ps3_ohci_sb_remove,
+};
},
};
-static int __init ohci_hcd_pxa27x_init (void)
-{
- pr_debug (DRIVER_INFO " (pxa27x)");
- pr_debug ("block sizes: ed %d td %d\n",
- sizeof (struct ed), sizeof (struct td));
-
- return platform_driver_register(&ohci_hcd_pxa27x_driver);
-}
-
-static void __exit ohci_hcd_pxa27x_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_pxa27x_driver);
-}
-
-module_init (ohci_hcd_pxa27x_init);
-module_exit (ohci_hcd_pxa27x_cleanup);
},
};
-static int __init ohci_hcd_s3c2410_init (void)
-{
- return platform_driver_register(&ohci_hcd_s3c2410_driver);
-}
-
-static void __exit ohci_hcd_s3c2410_cleanup (void)
-{
- platform_driver_unregister(&ohci_hcd_s3c2410_driver);
-}
-
-module_init (ohci_hcd_s3c2410_init);
-module_exit (ohci_hcd_s3c2410_cleanup);
.remove = ohci_hcd_sa1111_drv_remove,
};
-static int __init ohci_hcd_sa1111_init (void)
-{
- dbg (DRIVER_INFO " (SA-1111)");
- dbg ("block sizes: ed %d td %d",
- sizeof (struct ed), sizeof (struct td));
-
- return sa1111_driver_register(&ohci_hcd_sa1111_driver);
-}
-
-static void __exit ohci_hcd_sa1111_cleanup (void)
-{
- sa1111_driver_unregister(&ohci_hcd_sa1111_driver);
-}
-
-module_init (ohci_hcd_sa1111_init);
-module_exit (ohci_hcd_sa1111_cleanup);
#define OHCI_QUIRK_AMD756 0x01 /* erratum #4 */
#define OHCI_QUIRK_SUPERIO 0x02 /* natsemi */
#define OHCI_QUIRK_INITRESET 0x04 /* SiS, OPTi, ... */
-#define OHCI_BIG_ENDIAN 0x08 /* big endian HC */
-#define OHCI_QUIRK_ZFMICRO 0x10 /* Compaq ZFMicro chipset*/
+#define OHCI_QUIRK_BE_DESC 0x08 /* BE descriptors */
+#define OHCI_QUIRK_BE_MMIO 0x10 /* BE registers */
+#define OHCI_QUIRK_ZFMICRO 0x20 /* Compaq ZFMicro chipset*/
// there are also chip quirks/bugs in init logic
};
* a minority (notably the IBM STB04XXX and the Motorola MPC5200
* processors) implement them in big endian format.
*
+ * In addition some more exotic implementations like the Toshiba
+ * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
+ * they have a different endianness for registers vs. in-memory
+ * descriptors.
+ *
* This attempts to support either format at compile time without a
* runtime penalty, or both formats with the additional overhead
* of checking a flag bit.
+ *
+ * That leads to some tricky Kconfig rules howevber. There are
+ * different defaults based on some arch/ppc platforms, though
+ * the basic rules are:
+ *
+ * Controller type Kconfig options needed
+ * --------------- ----------------------
+ * little endian CONFIG_USB_OHCI_LITTLE_ENDIAN
+ *
+ * fully big endian CONFIG_USB_OHCI_BIG_ENDIAN_DESC _and_
+ * CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ *
+ * mixed endian CONFIG_USB_OHCI_LITTLE_ENDIAN _and_
+ * CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
+ *
+ * (If you have a mixed endian controller, you -must- also define
+ * CONFIG_USB_OHCI_LITTLE_ENDIAN or things will not work when building
+ * both your mixed endian and a fully big endian controller support in
+ * the same kernel image).
*/
-#ifdef CONFIG_USB_OHCI_BIG_ENDIAN
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_DESC
+#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
+#define big_endian_desc(ohci) (ohci->flags & OHCI_QUIRK_BE_DESC)
+#else
+#define big_endian_desc(ohci) 1 /* only big endian */
+#endif
+#else
+#define big_endian_desc(ohci) 0 /* only little endian */
+#endif
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
#ifdef CONFIG_USB_OHCI_LITTLE_ENDIAN
-#define big_endian(ohci) (ohci->flags & OHCI_BIG_ENDIAN) /* either */
+#define big_endian_mmio(ohci) (ohci->flags & OHCI_QUIRK_BE_MMIO)
#else
-#define big_endian(ohci) 1 /* only big endian */
+#define big_endian_mmio(ohci) 1 /* only big endian */
+#endif
+#else
+#define big_endian_mmio(ohci) 0 /* only little endian */
#endif
/*
* Big-endian read/write functions are arch-specific.
* Other arches can be added if/when they're needed.
+ *
+ * REVISIT: arch/powerpc now has readl/writel_be, so the
+ * definition below can die once the STB04xxx support is
+ * finally ported over.
*/
-#if defined(CONFIG_PPC)
+#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
#define readl_be(addr) in_be32((__force unsigned *)addr)
#define writel_be(val, addr) out_be32((__force unsigned *)addr, val)
#endif
-static inline unsigned int ohci_readl (const struct ohci_hcd *ohci,
- __hc32 __iomem * regs)
+static inline unsigned int _ohci_readl (const struct ohci_hcd *ohci,
+ __hc32 __iomem * regs)
{
- return big_endian(ohci) ? readl_be (regs) : readl ((__force u32 *)regs);
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ return big_endian_mmio(ohci) ?
+ readl_be ((__force u32 *)regs) :
+ readl ((__force u32 *)regs);
+#else
+ return readl ((__force u32 *)regs);
+#endif
}
-static inline void ohci_writel (const struct ohci_hcd *ohci,
- const unsigned int val, __hc32 __iomem *regs)
+static inline void _ohci_writel (const struct ohci_hcd *ohci,
+ const unsigned int val, __hc32 __iomem *regs)
{
- big_endian(ohci) ? writel_be (val, regs) :
- writel (val, (__force u32 *)regs);
+#ifdef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO
+ big_endian_mmio(ohci) ?
+ writel_be (val, (__force u32 *)regs) :
+ writel (val, (__force u32 *)regs);
+#else
+ writel (val, (__force u32 *)regs);
+#endif
}
-#else /* !CONFIG_USB_OHCI_BIG_ENDIAN */
-
-#define big_endian(ohci) 0 /* only little endian */
-
#ifdef CONFIG_ARCH_LH7A404
- /* Marc Singer: at the time this code was written, the LH7A404
- * had a problem reading the USB host registers. This
- * implementation of the ohci_readl function performs the read
- * twice as a work-around.
- */
-static inline unsigned int
-ohci_readl (const struct ohci_hcd *ohci, const __hc32 *regs)
-{
- *(volatile __force unsigned int*) regs;
- return *(volatile __force unsigned int*) regs;
-}
+/* Marc Singer: at the time this code was written, the LH7A404
+ * had a problem reading the USB host registers. This
+ * implementation of the ohci_readl function performs the read
+ * twice as a work-around.
+ */
+#define ohci_readl(o,r) (_ohci_readl(o,r),_ohci_readl(o,r))
+#define ohci_writel(o,v,r) _ohci_writel(o,v,r)
#else
- /* Standard version of ohci_readl uses standard, platform
- * specific implementation. */
-static inline unsigned int
-ohci_readl (const struct ohci_hcd *ohci, __hc32 __iomem * regs)
-{
- return readl(regs);
-}
+#define ohci_readl(o,r) _ohci_readl(o,r)
+#define ohci_writel(o,v,r) _ohci_writel(o,v,r)
#endif
-static inline void ohci_writel (const struct ohci_hcd *ohci,
- const unsigned int val, __hc32 __iomem *regs)
-{
- writel (val, regs);
-}
-
-#endif /* !CONFIG_USB_OHCI_BIG_ENDIAN */
/*-------------------------------------------------------------------------*/
/* cpu to ohci */
static inline __hc16 cpu_to_hc16 (const struct ohci_hcd *ohci, const u16 x)
{
- return big_endian(ohci) ? (__force __hc16)cpu_to_be16(x) : (__force __hc16)cpu_to_le16(x);
+ return big_endian_desc(ohci) ?
+ (__force __hc16)cpu_to_be16(x) :
+ (__force __hc16)cpu_to_le16(x);
}
static inline __hc16 cpu_to_hc16p (const struct ohci_hcd *ohci, const u16 *x)
{
- return big_endian(ohci) ? cpu_to_be16p(x) : cpu_to_le16p(x);
+ return big_endian_desc(ohci) ?
+ cpu_to_be16p(x) :
+ cpu_to_le16p(x);
}
static inline __hc32 cpu_to_hc32 (const struct ohci_hcd *ohci, const u32 x)
{
- return big_endian(ohci) ? (__force __hc32)cpu_to_be32(x) : (__force __hc32)cpu_to_le32(x);
+ return big_endian_desc(ohci) ?
+ (__force __hc32)cpu_to_be32(x) :
+ (__force __hc32)cpu_to_le32(x);
}
static inline __hc32 cpu_to_hc32p (const struct ohci_hcd *ohci, const u32 *x)
{
- return big_endian(ohci) ? cpu_to_be32p(x) : cpu_to_le32p(x);
+ return big_endian_desc(ohci) ?
+ cpu_to_be32p(x) :
+ cpu_to_le32p(x);
}
/* ohci to cpu */
static inline u16 hc16_to_cpu (const struct ohci_hcd *ohci, const __hc16 x)
{
- return big_endian(ohci) ? be16_to_cpu((__force __be16)x) : le16_to_cpu((__force __le16)x);
+ return big_endian_desc(ohci) ?
+ be16_to_cpu((__force __be16)x) :
+ le16_to_cpu((__force __le16)x);
}
static inline u16 hc16_to_cpup (const struct ohci_hcd *ohci, const __hc16 *x)
{
- return big_endian(ohci) ? be16_to_cpup((__force __be16 *)x) : le16_to_cpup((__force __le16 *)x);
+ return big_endian_desc(ohci) ?
+ be16_to_cpup((__force __be16 *)x) :
+ le16_to_cpup((__force __le16 *)x);
}
static inline u32 hc32_to_cpu (const struct ohci_hcd *ohci, const __hc32 x)
{
- return big_endian(ohci) ? be32_to_cpu((__force __be32)x) : le32_to_cpu((__force __le32)x);
+ return big_endian_desc(ohci) ?
+ be32_to_cpu((__force __be32)x) :
+ le32_to_cpu((__force __le32)x);
}
static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x)
{
- return big_endian(ohci) ? be32_to_cpup((__force __be32 *)x) : le32_to_cpup((__force __le32 *)x);
+ return big_endian_desc(ohci) ?
+ be32_to_cpup((__force __be32 *)x) :
+ le32_to_cpup((__force __le32 *)x);
}
/*-------------------------------------------------------------------------*/
/* HCCA frame number is 16 bits, but is accessed as 32 bits since not all
* hardware handles 16 bit reads. That creates a different confusion on
* some big-endian SOC implementations. Same thing happens with PSW access.
+ *
+ * FIXME: Deal with that as a runtime quirk when STB03xxx is ported over
+ * to arch/powerpc
*/
#ifdef CONFIG_STB03xxx
static inline u16 ohci_frame_no(const struct ohci_hcd *ohci)
{
u32 tmp;
- if (big_endian(ohci)) {
+ if (big_endian_desc(ohci)) {
tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no);
tmp >>= OHCI_BE_FRAME_NO_SHIFT;
} else
static inline __hc16 *ohci_hwPSWp(const struct ohci_hcd *ohci,
const struct td *td, int index)
{
- return (__hc16 *)(big_endian(ohci) ?
+ return (__hc16 *)(big_endian_desc(ohci) ?
&td->hwPSW[index ^ 1] : &td->hwPSW[index]);
}
space, "", qh, qtype,
le32_to_cpu(qh->link), le32_to_cpu(element));
if (qh->type == USB_ENDPOINT_XFER_ISOC)
- out += sprintf(out, "%*s period %d frame %x desc [%p]\n",
- space, "", qh->period, qh->iso_frame,
- qh->iso_packet_desc);
+ out += sprintf(out, "%*s period %d phase %d load %d us, "
+ "frame %x desc [%p]\n",
+ space, "", qh->period, qh->phase, qh->load,
+ qh->iso_frame, qh->iso_packet_desc);
+ else if (qh->type == USB_ENDPOINT_XFER_INT)
+ out += sprintf(out, "%*s period %d phase %d load %d us\n",
+ space, "", qh->period, qh->phase, qh->load);
if (element & UHCI_PTR_QH)
out += sprintf(out, "%*s Element points to QH (bug?)\n", space, "");
space, "", nurbs);
}
- if (qh->udev) {
+ if (qh->dummy_td) {
out += sprintf(out, "%*s Dummy TD\n", space, "");
out += uhci_show_td(qh->dummy_td, out, len - (out - buf), 0);
}
struct uhci_qh *qh;
struct uhci_td *td;
struct list_head *tmp, *head;
+ int nframes, nerrs;
out += uhci_show_root_hub_state(uhci, out, len - (out - buf));
out += sprintf(out, "HC status\n");
out += uhci_show_status(uhci, out, len - (out - buf));
+
+ out += sprintf(out, "Periodic load table\n");
+ for (i = 0; i < MAX_PHASE; ++i) {
+ out += sprintf(out, "\t%d", uhci->load[i]);
+ if (i % 8 == 7)
+ *out++ = '\n';
+ }
+ out += sprintf(out, "Total: %d, #INT: %d, #ISO: %d\n",
+ uhci->total_load,
+ uhci_to_hcd(uhci)->self.bandwidth_int_reqs,
+ uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs);
if (debug <= 1)
return out - buf;
out += sprintf(out, "Frame List\n");
+ nframes = 10;
+ nerrs = 0;
for (i = 0; i < UHCI_NUMFRAMES; ++i) {
+ __le32 link, qh_dma;
+
+ j = 0;
td = uhci->frame_cpu[i];
+ link = uhci->frame[i];
if (!td)
- continue;
+ goto check_link;
- out += sprintf(out, "- Frame %d\n", i); \
- if (td->dma_handle != (dma_addr_t)uhci->frame[i])
- out += sprintf(out, " frame list does not match td->dma_handle!\n");
+ if (nframes > 0) {
+ out += sprintf(out, "- Frame %d -> (%08x)\n",
+ i, le32_to_cpu(link));
+ j = 1;
+ }
head = &td->fl_list;
tmp = head;
do {
td = list_entry(tmp, struct uhci_td, fl_list);
tmp = tmp->next;
- out += uhci_show_td(td, out, len - (out - buf), 4);
+ if (cpu_to_le32(td->dma_handle) != link) {
+ if (nframes > 0)
+ out += sprintf(out, " link does "
+ "not match list entry!\n");
+ else
+ ++nerrs;
+ }
+ if (nframes > 0)
+ out += uhci_show_td(td, out,
+ len - (out - buf), 4);
+ link = td->link;
} while (tmp != head);
+
+check_link:
+ qh_dma = uhci_frame_skel_link(uhci, i);
+ if (link != qh_dma) {
+ if (nframes > 0) {
+ if (!j) {
+ out += sprintf(out,
+ "- Frame %d -> (%08x)\n",
+ i, le32_to_cpu(link));
+ j = 1;
+ }
+ out += sprintf(out, " link does not match "
+ "QH (%08x)!\n", le32_to_cpu(qh_dma));
+ } else
+ ++nerrs;
+ }
+ nframes -= j;
}
+ if (nerrs > 0)
+ out += sprintf(out, "Skipped %d bad links\n", nerrs);
out += sprintf(out, "Skeleton QHs\n");
static void wakeup_rh(struct uhci_hcd *uhci);
static void uhci_get_current_frame_number(struct uhci_hcd *uhci);
+/*
+ * Calculate the link pointer DMA value for the first Skeleton QH in a frame.
+ */
+static __le32 uhci_frame_skel_link(struct uhci_hcd *uhci, int frame)
+{
+ int skelnum;
+
+ /*
+ * The interrupt queues will be interleaved as evenly as possible.
+ * There's not much to be done about period-1 interrupts; they have
+ * to occur in every frame. But we can schedule period-2 interrupts
+ * in odd-numbered frames, period-4 interrupts in frames congruent
+ * to 2 (mod 4), and so on. This way each frame only has two
+ * interrupt QHs, which will help spread out bandwidth utilization.
+ *
+ * ffs (Find First bit Set) does exactly what we need:
+ * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
+ * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
+ * ffs >= 7 => not on any high-period queue, so use
+ * skel_int1_qh = skelqh[9].
+ * Add in UHCI_NUMFRAMES to insure at least one bit is set.
+ */
+ skelnum = 8 - (int) __ffs(frame | UHCI_NUMFRAMES);
+ if (skelnum <= 1)
+ skelnum = 9;
+ return UHCI_PTR_QH | cpu_to_le32(uhci->skelqh[skelnum]->dma_handle);
+}
+
#include "uhci-debug.c"
#include "uhci-q.c"
#include "uhci-hub.c"
/*
* Fill the frame list: make all entries point to the proper
* interrupt queue.
- *
- * The interrupt queues will be interleaved as evenly as possible.
- * There's not much to be done about period-1 interrupts; they have
- * to occur in every frame. But we can schedule period-2 interrupts
- * in odd-numbered frames, period-4 interrupts in frames congruent
- * to 2 (mod 4), and so on. This way each frame only has two
- * interrupt QHs, which will help spread out bandwidth utilization.
*/
for (i = 0; i < UHCI_NUMFRAMES; i++) {
- int irq;
-
- /*
- * ffs (Find First bit Set) does exactly what we need:
- * 1,3,5,... => ffs = 0 => use skel_int2_qh = skelqh[8],
- * 2,6,10,... => ffs = 1 => use skel_int4_qh = skelqh[7], etc.
- * ffs >= 7 => not on any high-period queue, so use
- * skel_int1_qh = skelqh[9].
- * Add UHCI_NUMFRAMES to insure at least one bit is set.
- */
- irq = 8 - (int) __ffs(i + UHCI_NUMFRAMES);
- if (irq <= 1)
- irq = 9;
/* Only place we don't use the frame list routines */
- uhci->frame[i] = UHCI_PTR_QH |
- cpu_to_le32(uhci->skelqh[irq]->dma_handle);
+ uhci->frame[i] = uhci_frame_skel_link(uhci, i);
}
/*
#define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */
#define CAN_SCHEDULE_FRAMES 1000 /* how far in the future frames
* can be scheduled */
+#define MAX_PHASE 32 /* Periodic scheduling length */
/* When no queues need Full-Speed Bandwidth Reclamation,
* delay this long before turning FSBR off */
unsigned long advance_jiffies; /* Time of last queue advance */
unsigned int unlink_frame; /* When the QH was unlinked */
unsigned int period; /* For Interrupt and Isochronous QHs */
+ short phase; /* Between 0 and period-1 */
+ short load; /* Periodic time requirement, in us */
unsigned int iso_frame; /* Frame # for iso_packet_desc */
int iso_status; /* Status for Isochronous URBs */
unsigned int needs_fixup:1; /* Must fix the TD toggle values */
unsigned int is_stopped:1; /* Queue was stopped by error/unlink */
unsigned int wait_expired:1; /* QH_WAIT_TIMEOUT has expired */
+ unsigned int bandwidth_reserved:1; /* Periodic bandwidth has
+ * been allocated */
} __attribute__((aligned(16)));
/*
wait_queue_head_t waitqh; /* endpoint_disable waiters */
int num_waiting; /* Number of waiters */
+
+ int total_load; /* Sum of array values */
+ short load[MAX_PHASE]; /* Periodic allocations */
};
/* Convert between a usb_hcd pointer and the corresponding uhci_hcd */
INIT_LIST_HEAD(&qh->node);
if (udev) { /* Normal QH */
- qh->dummy_td = uhci_alloc_td(uhci);
- if (!qh->dummy_td) {
- dma_pool_free(uhci->qh_pool, qh, dma_handle);
- return NULL;
+ qh->type = hep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+ if (qh->type != USB_ENDPOINT_XFER_ISOC) {
+ qh->dummy_td = uhci_alloc_td(uhci);
+ if (!qh->dummy_td) {
+ dma_pool_free(uhci->qh_pool, qh, dma_handle);
+ return NULL;
+ }
}
qh->state = QH_STATE_IDLE;
qh->hep = hep;
qh->udev = udev;
hep->hcpriv = qh;
- qh->type = hep->desc.bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
+
+ if (qh->type == USB_ENDPOINT_XFER_INT ||
+ qh->type == USB_ENDPOINT_XFER_ISOC)
+ qh->load = usb_calc_bus_time(udev->speed,
+ usb_endpoint_dir_in(&hep->desc),
+ qh->type == USB_ENDPOINT_XFER_ISOC,
+ le16_to_cpu(hep->desc.wMaxPacketSize))
+ / 1000 + 1;
} else { /* Skeleton QH */
qh->state = QH_STATE_ACTIVE;
list_del(&qh->node);
if (qh->udev) {
qh->hep->hcpriv = NULL;
- uhci_free_td(uhci, qh->dummy_td);
+ if (qh->dummy_td)
+ uhci_free_td(uhci, qh->dummy_td);
}
dma_pool_free(uhci->qh_pool, qh, qh->dma_handle);
}
goto done;
qh->element = UHCI_PTR_TERM;
- /* Control pipes have to worry about toggles */
+ /* Control pipes don't have to worry about toggles */
if (qh->type == USB_ENDPOINT_XFER_CONTROL)
goto done;
wake_up_all(&uhci->waitqh);
}
+/*
+ * Find the highest existing bandwidth load for a given phase and period.
+ */
+static int uhci_highest_load(struct uhci_hcd *uhci, int phase, int period)
+{
+ int highest_load = uhci->load[phase];
+
+ for (phase += period; phase < MAX_PHASE; phase += period)
+ highest_load = max_t(int, highest_load, uhci->load[phase]);
+ return highest_load;
+}
+
+/*
+ * Set qh->phase to the optimal phase for a periodic transfer and
+ * check whether the bandwidth requirement is acceptable.
+ */
+static int uhci_check_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+ int minimax_load;
+
+ /* Find the optimal phase (unless it is already set) and get
+ * its load value. */
+ if (qh->phase >= 0)
+ minimax_load = uhci_highest_load(uhci, qh->phase, qh->period);
+ else {
+ int phase, load;
+ int max_phase = min_t(int, MAX_PHASE, qh->period);
+
+ qh->phase = 0;
+ minimax_load = uhci_highest_load(uhci, qh->phase, qh->period);
+ for (phase = 1; phase < max_phase; ++phase) {
+ load = uhci_highest_load(uhci, phase, qh->period);
+ if (load < minimax_load) {
+ minimax_load = load;
+ qh->phase = phase;
+ }
+ }
+ }
+
+ /* Maximum allowable periodic bandwidth is 90%, or 900 us per frame */
+ if (minimax_load + qh->load > 900) {
+ dev_dbg(uhci_dev(uhci), "bandwidth allocation failed: "
+ "period %d, phase %d, %d + %d us\n",
+ qh->period, qh->phase, minimax_load, qh->load);
+ return -ENOSPC;
+ }
+ return 0;
+}
+
+/*
+ * Reserve a periodic QH's bandwidth in the schedule
+ */
+static void uhci_reserve_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+ int i;
+ int load = qh->load;
+ char *p = "??";
+
+ for (i = qh->phase; i < MAX_PHASE; i += qh->period) {
+ uhci->load[i] += load;
+ uhci->total_load += load;
+ }
+ uhci_to_hcd(uhci)->self.bandwidth_allocated =
+ uhci->total_load / MAX_PHASE;
+ switch (qh->type) {
+ case USB_ENDPOINT_XFER_INT:
+ ++uhci_to_hcd(uhci)->self.bandwidth_int_reqs;
+ p = "INT";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ ++uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs;
+ p = "ISO";
+ break;
+ }
+ qh->bandwidth_reserved = 1;
+ dev_dbg(uhci_dev(uhci),
+ "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
+ "reserve", qh->udev->devnum,
+ qh->hep->desc.bEndpointAddress, p,
+ qh->period, qh->phase, load);
+}
+
+/*
+ * Release a periodic QH's bandwidth reservation
+ */
+static void uhci_release_bandwidth(struct uhci_hcd *uhci, struct uhci_qh *qh)
+{
+ int i;
+ int load = qh->load;
+ char *p = "??";
+
+ for (i = qh->phase; i < MAX_PHASE; i += qh->period) {
+ uhci->load[i] -= load;
+ uhci->total_load -= load;
+ }
+ uhci_to_hcd(uhci)->self.bandwidth_allocated =
+ uhci->total_load / MAX_PHASE;
+ switch (qh->type) {
+ case USB_ENDPOINT_XFER_INT:
+ --uhci_to_hcd(uhci)->self.bandwidth_int_reqs;
+ p = "INT";
+ break;
+ case USB_ENDPOINT_XFER_ISOC:
+ --uhci_to_hcd(uhci)->self.bandwidth_isoc_reqs;
+ p = "ISO";
+ break;
+ }
+ qh->bandwidth_reserved = 0;
+ dev_dbg(uhci_dev(uhci),
+ "%s dev %d ep%02x-%s, period %d, phase %d, %d us\n",
+ "release", qh->udev->devnum,
+ qh->hep->desc.bEndpointAddress, p,
+ qh->period, qh->phase, load);
+}
+
static inline struct urb_priv *uhci_alloc_urb_priv(struct uhci_hcd *uhci,
struct urb *urb)
{
wmb();
qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE);
qh->dummy_td = td;
- qh->period = urb->interval;
usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe),
usb_pipeout(urb->pipe), toggle);
static int uhci_submit_interrupt(struct uhci_hcd *uhci, struct urb *urb,
struct uhci_qh *qh)
{
- int exponent;
+ int ret;
/* USB 1.1 interrupt transfers only involve one packet per interval.
* Drivers can submit URBs of any length, but longer ones will need
* multiple intervals to complete.
*/
- /* Figure out which power-of-two queue to use */
- for (exponent = 7; exponent >= 0; --exponent) {
- if ((1 << exponent) <= urb->interval)
- break;
- }
- if (exponent < 0)
- return -EINVAL;
- urb->interval = 1 << exponent;
+ if (!qh->bandwidth_reserved) {
+ int exponent;
- if (qh->period == 0)
+ /* Figure out which power-of-two queue to use */
+ for (exponent = 7; exponent >= 0; --exponent) {
+ if ((1 << exponent) <= urb->interval)
+ break;
+ }
+ if (exponent < 0)
+ return -EINVAL;
+ qh->period = 1 << exponent;
qh->skel = uhci->skelqh[UHCI_SKEL_INDEX(exponent)];
- else if (qh->period != urb->interval)
- return -EINVAL; /* Can't change the period */
- return uhci_submit_common(uhci, urb, qh);
+ /* For now, interrupt phase is fixed by the layout
+ * of the QH lists. */
+ qh->phase = (qh->period / 2) & (MAX_PHASE - 1);
+ ret = uhci_check_bandwidth(uhci, qh);
+ if (ret)
+ return ret;
+ } else if (qh->period > urb->interval)
+ return -EINVAL; /* Can't decrease the period */
+
+ ret = uhci_submit_common(uhci, urb, qh);
+ if (ret == 0) {
+ urb->interval = qh->period;
+ if (!qh->bandwidth_reserved)
+ uhci_reserve_bandwidth(uhci, qh);
+ }
+ return ret;
}
/*
return -EFBIG;
/* Check the period and figure out the starting frame number */
- if (qh->period == 0) {
+ if (!qh->bandwidth_reserved) {
+ qh->period = urb->interval;
if (urb->transfer_flags & URB_ISO_ASAP) {
+ qh->phase = -1; /* Find the best phase */
+ i = uhci_check_bandwidth(uhci, qh);
+ if (i)
+ return i;
+
+ /* Allow a little time to allocate the TDs */
uhci_get_current_frame_number(uhci);
- urb->start_frame = uhci->frame_number + 10;
+ frame = uhci->frame_number + 10;
+
+ /* Move forward to the first frame having the
+ * correct phase */
+ urb->start_frame = frame + ((qh->phase - frame) &
+ (qh->period - 1));
} else {
i = urb->start_frame - uhci->last_iso_frame;
if (i <= 0 || i >= UHCI_NUMFRAMES)
return -EINVAL;
+ qh->phase = urb->start_frame & (qh->period - 1);
+ i = uhci_check_bandwidth(uhci, qh);
+ if (i)
+ return i;
}
+
} else if (qh->period != urb->interval) {
return -EINVAL; /* Can't change the period */
/* Set the interrupt-on-completion flag on the last packet. */
td->status |= __constant_cpu_to_le32(TD_CTRL_IOC);
- qh->skel = uhci->skel_iso_qh;
- qh->period = urb->interval;
-
/* Add the TDs to the frame list */
frame = urb->start_frame;
list_for_each_entry(td, &urbp->td_list, list) {
qh->iso_status = 0;
}
+ qh->skel = uhci->skel_iso_qh;
+ if (!qh->bandwidth_reserved)
+ uhci_reserve_bandwidth(uhci, qh);
return 0;
}
unsigned long flags;
struct urb_priv *urbp;
struct uhci_qh *qh;
- int bustime;
spin_lock_irqsave(&uhci->lock, flags);
ret = uhci_submit_bulk(uhci, urb, qh);
break;
case USB_ENDPOINT_XFER_INT:
- if (list_empty(&qh->queue)) {
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0)
- ret = bustime;
- else {
- ret = uhci_submit_interrupt(uhci, urb, qh);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 0);
- }
- } else { /* inherit from parent */
- struct urb_priv *eurbp;
-
- eurbp = list_entry(qh->queue.prev, struct urb_priv,
- node);
- urb->bandwidth = eurbp->urb->bandwidth;
- ret = uhci_submit_interrupt(uhci, urb, qh);
- }
+ ret = uhci_submit_interrupt(uhci, urb, qh);
break;
case USB_ENDPOINT_XFER_ISOC:
urb->error_count = 0;
- bustime = usb_check_bandwidth(urb->dev, urb);
- if (bustime < 0) {
- ret = bustime;
- break;
- }
-
ret = uhci_submit_isochronous(uhci, urb, qh);
- if (ret == 0)
- usb_claim_bandwidth(urb->dev, urb, bustime, 1);
break;
}
if (ret != 0)
uhci_free_urb_priv(uhci, urbp);
- switch (qh->type) {
- case USB_ENDPOINT_XFER_ISOC:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- if (urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 1);
- break;
- case USB_ENDPOINT_XFER_INT:
- /* Release bandwidth for Interrupt or Isoc. transfers */
- /* Make sure we don't release if we have a queued URB */
- if (list_empty(&qh->queue) && urb->bandwidth)
- usb_release_bandwidth(urb->dev, urb, 0);
- else
- /* bandwidth was passed on to queued URB, */
- /* so don't let usb_unlink_urb() release it */
- urb->bandwidth = 0;
- break;
- }
-
spin_unlock(&uhci->lock);
usb_hcd_giveback_urb(uhci_to_hcd(uhci), urb);
spin_lock(&uhci->lock);
* reserved bandwidth. */
if (list_empty(&qh->queue)) {
uhci_unlink_qh(uhci, qh);
-
- /* Bandwidth stuff not yet implemented */
- qh->period = 0;
+ if (qh->bandwidth_reserved)
+ uhci_release_bandwidth(uhci, qh);
}
}
usb_deregister_dev(intf, &mdc800_class);
+ /* must be under lock to make sure no URB
+ is submitted after usb_kill_urb() */
+ mutex_lock(&mdc800->io_lock);
mdc800->state=NOT_CONNECTED;
usb_kill_urb(mdc800->irq_urb);
usb_kill_urb(mdc800->write_urb);
usb_kill_urb(mdc800->download_urb);
+ mutex_unlock(&mdc800->io_lock);
mdc800->dev = NULL;
usb_set_intfdata(intf, NULL);
Note: if you say N here, this device will still be supported, but without
force feedback.
+config PANTHERLORD_FF
+ bool "PantherLord USB/PS2 2in1 Adapter support"
+ depends on HID_FF
+ select INPUT_FF_MEMLESS if USB_HID
+ help
+ Say Y here if you have a PantherLord USB/PS2 2in1 Adapter and want
+ to enable force feedback support for it.
+
config THRUSTMASTER_FF
bool "ThrustMaster FireStorm Dual Power 2 support (EXPERIMENTAL)"
depends on HID_FF && EXPERIMENTAL
To compile this driver as a module, choose M here: the
module will be called appletouch.
+
+config USB_GTCO
+ tristate "GTCO CalComp/InterWrite USB Support"
+ depends on USB && INPUT
+ ---help---
+ Say Y here if you want to use the USB version of the GTCO
+ CalComp/InterWrite Tablet. Make sure to say Y to "Mouse support"
+ (CONFIG_INPUT_MOUSEDEV) and/or "Event interface support"
+ (CONFIG_INPUT_EVDEV) as well.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gtco.
ifeq ($(CONFIG_LOGITECH_FF),y)
usbhid-objs += hid-lgff.o
endif
+ifeq ($(CONFIG_PANTHERLORD_FF),y)
+ usbhid-objs += hid-plff.o
+endif
ifeq ($(CONFIG_THRUSTMASTER_FF),y)
usbhid-objs += hid-tmff.o
endif
obj-$(CONFIG_USB_YEALINK) += yealink.o
obj-$(CONFIG_USB_XPAD) += xpad.o
obj-$(CONFIG_USB_APPLETOUCH) += appletouch.o
+obj-$(CONFIG_USB_GTCO) += gtco.o
ifeq ($(CONFIG_USB_DEBUG),y)
EXTRA_CFLAGS += -DDEBUG
--- /dev/null
+/* -*- linux-c -*-
+
+GTCO digitizer USB driver
+
+Use the err(), dbg() and info() macros from usb.h for system logging
+
+TO CHECK: Is pressure done right on report 5?
+
+Copyright (C) 2006 GTCO CalComp
+
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License
+as published by the Free Software Foundation; version 2
+of the License.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program; if not, write to the Free Software
+Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA.
+
+Permission to use, copy, modify, distribute, and sell this software and its
+documentation for any purpose is hereby granted without fee, provided that
+the above copyright notice appear in all copies and that both that
+copyright notice and this permission notice appear in supporting
+documentation, and that the name of GTCO-CalComp not be used in advertising
+or publicity pertaining to distribution of the software without specific,
+written prior permission. GTCO-CalComp makes no representations about the
+suitability of this software for any purpose. It is provided "as is"
+without express or implied warranty.
+
+GTCO-CALCOMP DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+EVENT SHALL GTCO-CALCOMP BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+TORTIOUS ACTIONS, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
+PERFORMANCE OF THIS SOFTWARE.
+
+GTCO CalComp, Inc.
+7125 Riverwood Drive
+Columbia, MD 21046
+
+Jeremy Roberson jroberson@gtcocalcomp.com
+Scott Hill shill@gtcocalcomp.com
+*/
+
+
+
+/*#define DEBUG*/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+#include <asm/unaligned.h>
+#include <asm/byteorder.h>
+
+
+#include <linux/version.h>
+#include <linux/usb/input.h>
+
+/* Version with a Major number of 2 is for kernel inclusion only. */
+#define GTCO_VERSION "2.00.0006"
+
+
+/* MACROS */
+
+#define VENDOR_ID_GTCO 0x078C
+#define PID_400 0x400
+#define PID_401 0x401
+#define PID_1000 0x1000
+#define PID_1001 0x1001
+#define PID_1002 0x1002
+
+/* Max size of a single report */
+#define REPORT_MAX_SIZE 10
+
+
+/* Bitmask whether pen is in range */
+#define MASK_INRANGE 0x20
+#define MASK_BUTTON 0x01F
+
+#define PATHLENGTH 64
+
+/* DATA STRUCTURES */
+
+/* Device table */
+static struct usb_device_id gtco_usbid_table [] = {
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_400) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_401) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1000) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1001) },
+ { USB_DEVICE(VENDOR_ID_GTCO, PID_1002) },
+ { }
+};
+MODULE_DEVICE_TABLE (usb, gtco_usbid_table);
+
+
+/* Structure to hold all of our device specific stuff */
+struct gtco {
+
+ struct input_dev *inputdevice; /* input device struct pointer */
+ struct usb_device *usbdev; /* the usb device for this device */
+ struct urb *urbinfo; /* urb for incoming reports */
+ dma_addr_t buf_dma; /* dma addr of the data buffer*/
+ unsigned char * buffer; /* databuffer for reports */
+
+ char usbpath[PATHLENGTH];
+ int openCount;
+
+ /* Information pulled from Report Descriptor */
+ u32 usage;
+ u32 min_X;
+ u32 max_X;
+ u32 min_Y;
+ u32 max_Y;
+ s8 mintilt_X;
+ s8 maxtilt_X;
+ s8 mintilt_Y;
+ s8 maxtilt_Y;
+ u32 maxpressure;
+ u32 minpressure;
+};
+
+
+
+/* Code for parsing the HID REPORT DESCRIPTOR */
+
+/* From HID1.11 spec */
+struct hid_descriptor
+{
+ struct usb_descriptor_header header;
+ __le16 bcdHID;
+ u8 bCountryCode;
+ u8 bNumDescriptors;
+ u8 bDescriptorType;
+ __le16 wDescriptorLength;
+} __attribute__ ((packed));
+
+
+#define HID_DESCRIPTOR_SIZE 9
+#define HID_DEVICE_TYPE 33
+#define REPORT_DEVICE_TYPE 34
+
+
+#define PREF_TAG(x) ((x)>>4)
+#define PREF_TYPE(x) ((x>>2)&0x03)
+#define PREF_SIZE(x) ((x)&0x03)
+
+#define TYPE_MAIN 0
+#define TYPE_GLOBAL 1
+#define TYPE_LOCAL 2
+#define TYPE_RESERVED 3
+
+#define TAG_MAIN_INPUT 0x8
+#define TAG_MAIN_OUTPUT 0x9
+#define TAG_MAIN_FEATURE 0xB
+#define TAG_MAIN_COL_START 0xA
+#define TAG_MAIN_COL_END 0xC
+
+#define TAG_GLOB_USAGE 0
+#define TAG_GLOB_LOG_MIN 1
+#define TAG_GLOB_LOG_MAX 2
+#define TAG_GLOB_PHYS_MIN 3
+#define TAG_GLOB_PHYS_MAX 4
+#define TAG_GLOB_UNIT_EXP 5
+#define TAG_GLOB_UNIT 6
+#define TAG_GLOB_REPORT_SZ 7
+#define TAG_GLOB_REPORT_ID 8
+#define TAG_GLOB_REPORT_CNT 9
+#define TAG_GLOB_PUSH 10
+#define TAG_GLOB_POP 11
+
+#define TAG_GLOB_MAX 12
+
+#define DIGITIZER_USAGE_TIP_PRESSURE 0x30
+#define DIGITIZER_USAGE_TILT_X 0x3D
+#define DIGITIZER_USAGE_TILT_Y 0x3E
+
+
+/*
+ *
+ * This is an abbreviated parser for the HID Report Descriptor. We
+ * know what devices we are talking to, so this is by no means meant
+ * to be generic. We can make some safe assumptions:
+ *
+ * - We know there are no LONG tags, all short
+ * - We know that we have no MAIN Feature and MAIN Output items
+ * - We know what the IRQ reports are supposed to look like.
+ *
+ * The main purpose of this is to use the HID report desc to figure
+ * out the mins and maxs of the fields in the IRQ reports. The IRQ
+ * reports for 400/401 change slightly if the max X is bigger than 64K.
+ *
+ */
+static void parse_hid_report_descriptor(struct gtco *device, char * report,
+ int length)
+{
+ int x,i=0;
+
+ /* Tag primitive vars */
+ __u8 prefix;
+ __u8 size;
+ __u8 tag;
+ __u8 type;
+ __u8 data = 0;
+ __u16 data16 = 0;
+ __u32 data32 = 0;
+
+
+ /* For parsing logic */
+ int inputnum = 0;
+ __u32 usage = 0;
+
+ /* Global Values, indexed by TAG */
+ __u32 globalval[TAG_GLOB_MAX];
+ __u32 oldval[TAG_GLOB_MAX];
+
+ /* Debug stuff */
+ char maintype='x';
+ char globtype[12];
+ int indent=0;
+ char indentstr[10]="";
+
+
+
+ dbg("======>>>>>>PARSE<<<<<<======");
+
+ /* Walk this report and pull out the info we need */
+ while (i<length){
+ prefix=report[i];
+
+ /* Skip over prefix */
+ i++;
+
+ /* Determine data size and save the data in the proper variable */
+ size = PREF_SIZE(prefix);
+ switch(size){
+ case 1:
+ data = report[i];
+ break;
+ case 2:
+ data16 = le16_to_cpu(get_unaligned((__le16*)(&(report[i]))));
+ break;
+ case 3:
+ size = 4;
+ data32 = le32_to_cpu(get_unaligned((__le32*)(&(report[i]))));
+ }
+
+ /* Skip size of data */
+ i+=size;
+
+ /* What we do depends on the tag type */
+ tag = PREF_TAG(prefix);
+ type = PREF_TYPE(prefix);
+ switch(type){
+ case TYPE_MAIN:
+ strcpy(globtype,"");
+ switch(tag){
+
+ case TAG_MAIN_INPUT:
+ /*
+ * The INPUT MAIN tag signifies this is
+ * information from a report. We need to
+ * figure out what it is and store the
+ * min/max values
+ */
+
+ maintype='I';
+ if (data==2){
+ strcpy(globtype,"Variable");
+ }
+ if (data==3){
+ strcpy(globtype,"Var|Const");
+ }
+
+ dbg("::::: Saving Report: %d input #%d Max: 0x%X(%d) Min:0x%X(%d) of %d bits",
+ globalval[TAG_GLOB_REPORT_ID],inputnum,
+ globalval[TAG_GLOB_LOG_MAX],globalval[TAG_GLOB_LOG_MAX],
+ globalval[TAG_GLOB_LOG_MIN],globalval[TAG_GLOB_LOG_MIN],
+ (globalval[TAG_GLOB_REPORT_SZ] * globalval[TAG_GLOB_REPORT_CNT]));
+
+
+ /*
+ We can assume that the first two input items
+ are always the X and Y coordinates. After
+ that, we look for everything else by
+ local usage value
+ */
+ switch (inputnum){
+ case 0: /* X coord */
+ dbg("GER: X Usage: 0x%x",usage);
+ if (device->max_X == 0){
+ device->max_X = globalval[TAG_GLOB_LOG_MAX];
+ device->min_X = globalval[TAG_GLOB_LOG_MIN];
+ }
+
+ break;
+ case 1: /* Y coord */
+ dbg("GER: Y Usage: 0x%x",usage);
+ if (device->max_Y == 0){
+ device->max_Y = globalval[TAG_GLOB_LOG_MAX];
+ device->min_Y = globalval[TAG_GLOB_LOG_MIN];
+ }
+ break;
+ default:
+ /* Tilt X */
+ if (usage == DIGITIZER_USAGE_TILT_X){
+ if (device->maxtilt_X == 0){
+ device->maxtilt_X = globalval[TAG_GLOB_LOG_MAX];
+ device->mintilt_X = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+ /* Tilt Y */
+ if (usage == DIGITIZER_USAGE_TILT_Y){
+ if (device->maxtilt_Y == 0){
+ device->maxtilt_Y = globalval[TAG_GLOB_LOG_MAX];
+ device->mintilt_Y = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+
+ /* Pressure */
+ if (usage == DIGITIZER_USAGE_TIP_PRESSURE){
+ if (device->maxpressure == 0){
+ device->maxpressure = globalval[TAG_GLOB_LOG_MAX];
+ device->minpressure = globalval[TAG_GLOB_LOG_MIN];
+ }
+ }
+
+ break;
+ }
+
+ inputnum++;
+
+
+ break;
+ case TAG_MAIN_OUTPUT:
+ maintype='O';
+ break;
+ case TAG_MAIN_FEATURE:
+ maintype='F';
+ break;
+ case TAG_MAIN_COL_START:
+ maintype='S';
+
+ if (data==0){
+ dbg("======>>>>>> Physical");
+ strcpy(globtype,"Physical");
+ }else{
+ dbg("======>>>>>>");
+ }
+
+ /* Indent the debug output */
+ indent++;
+ for (x=0;x<indent;x++){
+ indentstr[x]='-';
+ }
+ indentstr[x]=0;
+
+ /* Save global tags */
+ for (x=0;x<TAG_GLOB_MAX;x++){
+ oldval[x] = globalval[x];
+ }
+
+ break;
+ case TAG_MAIN_COL_END:
+ dbg("<<<<<<======");
+ maintype='E';
+ indent--;
+ for (x=0;x<indent;x++){
+ indentstr[x]='-';
+ }
+ indentstr[x]=0;
+
+ /* Copy global tags back */
+ for (x=0;x<TAG_GLOB_MAX;x++){
+ globalval[x] = oldval[x];
+ }
+
+ break;
+ }
+
+ switch (size){
+ case 1:
+ dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+ indentstr,tag,maintype,size,globtype,data);
+ break;
+ case 2:
+ dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+ indentstr,tag,maintype,size,globtype, data16);
+ break;
+ case 4:
+ dbg("%sMAINTAG:(%d) %c SIZE: %d Data: %s 0x%x",
+ indentstr,tag,maintype,size,globtype,data32);
+ break;
+ }
+ break;
+ case TYPE_GLOBAL:
+ switch(tag){
+ case TAG_GLOB_USAGE:
+ /*
+ * First time we hit the global usage tag,
+ * it should tell us the type of device
+ */
+ if (device->usage == 0){
+ device->usage = data;
+ }
+ strcpy(globtype,"USAGE");
+ break;
+ case TAG_GLOB_LOG_MIN :
+ strcpy(globtype,"LOG_MIN");
+ break;
+ case TAG_GLOB_LOG_MAX :
+ strcpy(globtype,"LOG_MAX");
+ break;
+ case TAG_GLOB_PHYS_MIN :
+ strcpy(globtype,"PHYS_MIN");
+ break;
+ case TAG_GLOB_PHYS_MAX :
+ strcpy(globtype,"PHYS_MAX");
+ break;
+ case TAG_GLOB_UNIT_EXP :
+ strcpy(globtype,"EXP");
+ break;
+ case TAG_GLOB_UNIT :
+ strcpy(globtype,"UNIT");
+ break;
+ case TAG_GLOB_REPORT_SZ :
+ strcpy(globtype,"REPORT_SZ");
+ break;
+ case TAG_GLOB_REPORT_ID :
+ strcpy(globtype,"REPORT_ID");
+ /* New report, restart numbering */
+ inputnum=0;
+ break;
+ case TAG_GLOB_REPORT_CNT:
+ strcpy(globtype,"REPORT_CNT");
+ break;
+ case TAG_GLOB_PUSH :
+ strcpy(globtype,"PUSH");
+ break;
+ case TAG_GLOB_POP:
+ strcpy(globtype,"POP");
+ break;
+ }
+
+
+ /* Check to make sure we have a good tag number
+ so we don't overflow array */
+ if (tag < TAG_GLOB_MAX){
+ switch (size){
+ case 1:
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data);
+ globalval[tag]=data;
+ break;
+ case 2:
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data16);
+ globalval[tag]=data16;
+ break;
+ case 4:
+ dbg("%sGLOBALTAG:%s(%d) SIZE: %d Data: 0x%x",indentstr,globtype,tag,size,data32);
+ globalval[tag]=data32;
+ break;
+ }
+ }else{
+ dbg("%sGLOBALTAG: ILLEGAL TAG:%d SIZE: %d ",
+ indentstr,tag,size);
+ }
+
+
+ break;
+
+ case TYPE_LOCAL:
+ switch(tag){
+ case TAG_GLOB_USAGE:
+ strcpy(globtype,"USAGE");
+ /* Always 1 byte */
+ usage = data;
+ break;
+ case TAG_GLOB_LOG_MIN :
+ strcpy(globtype,"MIN");
+ break;
+ case TAG_GLOB_LOG_MAX :
+ strcpy(globtype,"MAX");
+ break;
+ default:
+ strcpy(globtype,"UNKNOWN");
+ }
+
+ switch (size){
+ case 1:
+ dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+ indentstr,tag,globtype,size,data);
+ break;
+ case 2:
+ dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+ indentstr,tag,globtype,size,data16);
+ break;
+ case 4:
+ dbg("%sLOCALTAG:(%d) %s SIZE: %d Data: 0x%x",
+ indentstr,tag,globtype,size,data32);
+ break;
+ }
+
+ break;
+ }
+
+ }
+
+}
+
+
+
+/* INPUT DRIVER Routines */
+
+
+/*
+ * Called when opening the input device. This will submit the URB to
+ * the usb system so we start getting reports
+ */
+static int gtco_input_open(struct input_dev *inputdev)
+{
+ struct gtco *device;
+ device = inputdev->private;
+
+ device->urbinfo->dev = device->usbdev;
+ if (usb_submit_urb(device->urbinfo, GFP_KERNEL)) {
+ return -EIO;
+ }
+ return 0;
+}
+
+/**
+ Called when closing the input device. This will unlink the URB
+*/
+static void gtco_input_close(struct input_dev *inputdev)
+{
+ struct gtco *device = inputdev->private;
+
+ usb_kill_urb(device->urbinfo);
+
+}
+
+
+/*
+ * Setup input device capabilities. Tell the input system what this
+ * device is capable of generating.
+ *
+ * This information is based on what is read from the HID report and
+ * placed in the struct gtco structure
+ *
+ */
+static void gtco_setup_caps(struct input_dev *inputdev)
+{
+ struct gtco *device = inputdev->private;
+
+
+ /* Which events */
+ inputdev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_MSC);
+
+
+ /* Misc event menu block */
+ inputdev->mscbit[0] = BIT(MSC_SCAN)|BIT(MSC_SERIAL)|BIT(MSC_RAW) ;
+
+
+ /* Absolute values based on HID report info */
+ input_set_abs_params(inputdev, ABS_X, device->min_X, device->max_X,
+ 0, 0);
+ input_set_abs_params(inputdev, ABS_Y, device->min_Y, device->max_Y,
+ 0, 0);
+
+ /* Proximity */
+ input_set_abs_params(inputdev, ABS_DISTANCE, 0, 1, 0, 0);
+
+ /* Tilt & pressure */
+ input_set_abs_params(inputdev, ABS_TILT_X, device->mintilt_X,
+ device->maxtilt_X, 0, 0);
+ input_set_abs_params(inputdev, ABS_TILT_Y, device->mintilt_Y,
+ device->maxtilt_Y, 0, 0);
+ input_set_abs_params(inputdev, ABS_PRESSURE, device->minpressure,
+ device->maxpressure, 0, 0);
+
+
+ /* Transducer */
+ input_set_abs_params(inputdev, ABS_MISC, 0,0xFF, 0, 0);
+
+}
+
+
+
+/* USB Routines */
+
+
+/*
+ * URB callback routine. Called when we get IRQ reports from the
+ * digitizer.
+ *
+ * This bridges the USB and input device worlds. It generates events
+ * on the input device based on the USB reports.
+ */
+static void gtco_urb_callback(struct urb *urbinfo)
+{
+
+
+ struct gtco *device = urbinfo->context;
+ struct input_dev *inputdev;
+ int rc;
+ u32 val = 0;
+ s8 valsigned = 0;
+ char le_buffer[2];
+
+ inputdev = device->inputdevice;
+
+
+ /* Was callback OK? */
+ if ((urbinfo->status == -ECONNRESET ) ||
+ (urbinfo->status == -ENOENT ) ||
+ (urbinfo->status == -ESHUTDOWN )){
+
+ /* Shutdown is occurring. Return and don't queue up any more */
+ return;
+ }
+
+ if (urbinfo->status != 0 ) {
+ /* Some unknown error. Hopefully temporary. Just go and */
+ /* requeue an URB */
+ goto resubmit;
+ }
+
+ /*
+ * Good URB, now process
+ */
+
+ /* PID dependent when we interpret the report */
+ if ((inputdev->id.product == PID_1000 )||
+ (inputdev->id.product == PID_1001 )||
+ (inputdev->id.product == PID_1002 ))
+ {
+
+ /*
+ * Switch on the report ID
+ * Conveniently, the reports have more information, the higher
+ * the report number. We can just fall through the case
+ * statements if we start with the highest number report
+ */
+ switch(device->buffer[0]){
+ case 5:
+ /* Pressure is 9 bits */
+ val = ((u16)(device->buffer[8]) << 1);
+ val |= (u16)(device->buffer[7] >> 7);
+ input_report_abs(inputdev, ABS_PRESSURE,
+ device->buffer[8]);
+
+ /* Mask out the Y tilt value used for pressure */
+ device->buffer[7] = (u8)((device->buffer[7]) & 0x7F);
+
+
+ /* Fall thru */
+ case 4:
+ /* Tilt */
+
+ /* Sign extend these 7 bit numbers. */
+ if (device->buffer[6] & 0x40)
+ device->buffer[6] |= 0x80;
+
+ if (device->buffer[7] & 0x40)
+ device->buffer[7] |= 0x80;
+
+
+ valsigned = (device->buffer[6]);
+ input_report_abs(inputdev, ABS_TILT_X, (s32)valsigned);
+
+ valsigned = (device->buffer[7]);
+ input_report_abs(inputdev, ABS_TILT_Y, (s32)valsigned);
+
+ /* Fall thru */
+
+ case 2:
+ case 3:
+ /* Convert buttons, only 5 bits possible */
+ val = (device->buffer[5])&MASK_BUTTON;
+
+ /* We don't apply any meaning to the bitmask,
+ just report */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+
+ /* Fall thru */
+ case 1:
+
+ /* All reports have X and Y coords in the same place */
+ val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[1])));
+ input_report_abs(inputdev, ABS_X, val);
+
+ val = le16_to_cpu(get_unaligned((__le16 *) &(device->buffer[3])));
+ input_report_abs(inputdev, ABS_Y, val);
+
+
+ /* Ditto for proximity bit */
+ if (device->buffer[5]& MASK_INRANGE){
+ val = 1;
+ }else{
+ val=0;
+ }
+ input_report_abs(inputdev, ABS_DISTANCE, val);
+
+
+ /* Report 1 is an exception to how we handle buttons */
+ /* Buttons are an index, not a bitmask */
+ if (device->buffer[0] == 1){
+
+ /* Convert buttons, 5 bit index */
+ /* Report value of index set as one,
+ the rest as 0 */
+ val = device->buffer[5]& MASK_BUTTON;
+ dbg("======>>>>>>REPORT 1: val 0x%X(%d)",
+ val,val);
+
+ /*
+ * We don't apply any meaning to the button
+ * index, just report it
+ */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+
+
+ }
+
+ break;
+ case 7:
+ /* Menu blocks */
+ input_event(inputdev, EV_MSC, MSC_SCAN,
+ device->buffer[1]);
+
+
+ break;
+
+ }
+
+
+ }
+ /* Other pid class */
+ if ((inputdev->id.product == PID_400 )||
+ (inputdev->id.product == PID_401 ))
+ {
+
+ /* Report 2 */
+ if (device->buffer[0] == 2){
+ /* Menu blocks */
+ input_event(inputdev, EV_MSC, MSC_SCAN,
+ device->buffer[1]);
+ }
+
+ /* Report 1 */
+ if (device->buffer[0] == 1){
+ char buttonbyte;
+
+
+ /* IF X max > 64K, we still a bit from the y report */
+ if (device->max_X > 0x10000){
+
+ val = (u16)(((u16)(device->buffer[2]<<8))|((u8)(device->buffer[1])));
+ val |= (u32)(((u8)device->buffer[3]&0x1)<< 16);
+
+ input_report_abs(inputdev, ABS_X, val);
+
+ le_buffer[0] = (u8)((u8)(device->buffer[3])>>1);
+ le_buffer[0] |= (u8)((device->buffer[3]&0x1)<<7);
+
+ le_buffer[1] = (u8)(device->buffer[4]>>1);
+ le_buffer[1] |= (u8)((device->buffer[5]&0x1)<<7);
+
+ val = le16_to_cpu(get_unaligned((__le16 *)(le_buffer)));
+
+ input_report_abs(inputdev, ABS_Y, val);
+
+
+ /*
+ * Shift the button byte right by one to
+ * make it look like the standard report
+ */
+ buttonbyte = (device->buffer[5])>>1;
+ }else{
+
+ val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[1]))));
+ input_report_abs(inputdev, ABS_X, val);
+
+ val = le16_to_cpu(get_unaligned((__le16 *) (&(device->buffer[3]))));
+ input_report_abs(inputdev, ABS_Y, val);
+
+ buttonbyte = device->buffer[5];
+
+ }
+
+
+ /* BUTTONS and PROXIMITY */
+ if (buttonbyte& MASK_INRANGE){
+ val = 1;
+ }else{
+ val=0;
+ }
+ input_report_abs(inputdev, ABS_DISTANCE, val);
+
+ /* Convert buttons, only 4 bits possible */
+ val = buttonbyte&0x0F;
+#ifdef USE_BUTTONS
+ for ( i=0;i<5;i++){
+ input_report_key(inputdev, BTN_DIGI+i,val&(1<<i));
+ }
+#else
+ /* We don't apply any meaning to the bitmask, just report */
+ input_event(inputdev, EV_MSC, MSC_SERIAL, val);
+#endif
+ /* TRANSDUCER */
+ input_report_abs(inputdev, ABS_MISC, device->buffer[6]);
+
+ }
+ }
+
+ /* Everybody gets report ID's */
+ input_event(inputdev, EV_MSC, MSC_RAW, device->buffer[0]);
+
+ /* Sync it up */
+ input_sync(inputdev);
+
+ resubmit:
+ rc = usb_submit_urb(urbinfo, GFP_ATOMIC);
+ if (rc != 0) {
+ err("usb_submit_urb failed rc=0x%x",rc);
+ }
+
+}
+
+/*
+ * The probe routine. This is called when the kernel find the matching USB
+ * vendor/product. We do the following:
+ *
+ * - Allocate mem for a local structure to manage the device
+ * - Request a HID Report Descriptor from the device and parse it to
+ * find out the device parameters
+ * - Create an input device and assign it attributes
+ * - Allocate an URB so the device can talk to us when the input
+ * queue is open
+ */
+static int gtco_probe(struct usb_interface *usbinterface,
+ const struct usb_device_id *id)
+{
+
+ struct gtco *device = NULL;
+ char path[PATHLENGTH];
+ struct input_dev *inputdev;
+ struct hid_descriptor *hid_desc;
+ char *report;
+ int result=0, retry;
+ struct usb_endpoint_descriptor *endpoint;
+
+ /* Allocate memory for device structure */
+ device = kzalloc(sizeof(struct gtco), GFP_KERNEL);
+ if (device == NULL) {
+ err("No more memory");
+ return -ENOMEM;
+ }
+
+
+ device->inputdevice = input_allocate_device();
+ if (!device->inputdevice){
+ kfree(device);
+ err("No more memory");
+ return -ENOMEM;
+ }
+
+ /* Get pointer to the input device */
+ inputdev = device->inputdevice;
+
+ /* Save interface information */
+ device->usbdev = usb_get_dev(interface_to_usbdev(usbinterface));
+
+
+ /* Allocate some data for incoming reports */
+ device->buffer = usb_buffer_alloc(device->usbdev, REPORT_MAX_SIZE,
+ GFP_KERNEL, &(device->buf_dma));
+ if (!device->buffer){
+ input_free_device(device->inputdevice);
+ kfree(device);
+ err("No more memory");
+ return -ENOMEM;
+ }
+
+ /* Allocate URB for reports */
+ device->urbinfo = usb_alloc_urb(0, GFP_KERNEL);
+ if (!device->urbinfo) {
+ usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
+ device->buffer, device->buf_dma);
+ input_free_device(device->inputdevice);
+ kfree(device);
+ err("No more memory");
+ return -ENOMEM;
+ }
+
+
+ /*
+ * The endpoint is always altsetting 0, we know this since we know
+ * this device only has one interrupt endpoint
+ */
+ endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+ /* Some debug */
+ dbg("gtco # interfaces: %d",usbinterface->num_altsetting);
+ dbg("num endpoints: %d",usbinterface->cur_altsetting->desc.bNumEndpoints);
+ dbg("interface class: %d",usbinterface->cur_altsetting->desc.bInterfaceClass);
+ dbg("endpoint: attribute:0x%x type:0x%x",endpoint->bmAttributes,endpoint->bDescriptorType);
+ if ((endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT)
+ dbg("endpoint: we have interrupt endpoint\n");
+
+ dbg("endpoint extra len:%d ",usbinterface->altsetting[0].extralen);
+
+
+
+ /*
+ * Find the HID descriptor so we can find out the size of the
+ * HID report descriptor
+ */
+ if (usb_get_extra_descriptor(usbinterface->cur_altsetting,
+ HID_DEVICE_TYPE,&hid_desc) != 0){
+ err("Can't retrieve exta USB descriptor to get hid report descriptor length");
+ usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
+ device->buffer, device->buf_dma);
+ input_free_device(device->inputdevice);
+ kfree(device);
+ return -EIO;
+ }
+
+ dbg("Extra descriptor success: type:%d len:%d",
+ hid_desc->bDescriptorType, hid_desc->wDescriptorLength);
+
+ if (!(report = kzalloc(hid_desc->wDescriptorLength, GFP_KERNEL))) {
+ usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
+ device->buffer, device->buf_dma);
+
+ input_free_device(device->inputdevice);
+ kfree(device);
+ err("No more memory");
+ return -ENOMEM;
+ }
+
+ /* Couple of tries to get reply */
+ for (retry=0;retry<3;retry++) {
+ result = usb_control_msg(device->usbdev,
+ usb_rcvctrlpipe(device->usbdev, 0),
+ USB_REQ_GET_DESCRIPTOR,
+ USB_RECIP_INTERFACE | USB_DIR_IN,
+ (REPORT_DEVICE_TYPE << 8),
+ 0, /* interface */
+ report,
+ hid_desc->wDescriptorLength,
+ 5000); /* 5 secs */
+
+ if (result == hid_desc->wDescriptorLength)
+ break;
+ }
+
+ /* If we didn't get the report, fail */
+ dbg("usb_control_msg result: :%d", result);
+ if (result != hid_desc->wDescriptorLength){
+ kfree(report);
+ usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
+ device->buffer, device->buf_dma);
+ input_free_device(device->inputdevice);
+ kfree(device);
+ err("Failed to get HID Report Descriptor of size: %d",
+ hid_desc->wDescriptorLength);
+ return -EIO;
+ }
+
+
+ /* Now we parse the report */
+ parse_hid_report_descriptor(device,report,result);
+
+ /* Now we delete it */
+ kfree(report);
+
+ /* Create a device file node */
+ usb_make_path(device->usbdev, path, PATHLENGTH);
+ sprintf(device->usbpath, "%s/input0", path);
+
+
+ /* Set Input device functions */
+ inputdev->open = gtco_input_open;
+ inputdev->close = gtco_input_close;
+
+ /* Set input device information */
+ inputdev->name = "GTCO_CalComp";
+ inputdev->phys = device->usbpath;
+ inputdev->private = device;
+
+
+ /* Now set up all the input device capabilities */
+ gtco_setup_caps(inputdev);
+
+ /* Set input device required ID information */
+ usb_to_input_id(device->usbdev, &device->inputdevice->id);
+ inputdev->cdev.dev = &usbinterface->dev;
+
+ /* Setup the URB, it will be posted later on open of input device */
+ endpoint = &usbinterface->altsetting[0].endpoint[0].desc;
+
+ usb_fill_int_urb(device->urbinfo,
+ device->usbdev,
+ usb_rcvintpipe(device->usbdev,
+ endpoint->bEndpointAddress),
+ device->buffer,
+ REPORT_MAX_SIZE,
+ gtco_urb_callback,
+ device,
+ endpoint->bInterval);
+
+ device->urbinfo->transfer_dma = device->buf_dma;
+ device->urbinfo->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+
+ /* Save device pointer in USB interface device */
+ usb_set_intfdata(usbinterface, device);
+
+ /* All done, now register the input device */
+ input_register_device(inputdev);
+
+ info( "gtco driver created usb: %s\n", path);
+ return 0;
+
+}
+
+/*
+ * This function is a standard USB function called when the USB device
+ * is disconnected. We will get rid of the URV, de-register the input
+ * device, and free up allocated memory
+ */
+static void gtco_disconnect(struct usb_interface *interface)
+{
+
+ /* Grab private device ptr */
+ struct gtco *device = usb_get_intfdata (interface);
+ struct input_dev *inputdev;
+
+ inputdev = device->inputdevice;
+
+ /* Now reverse all the registration stuff */
+ if (device) {
+ input_unregister_device(inputdev);
+ usb_kill_urb(device->urbinfo);
+ usb_free_urb(device->urbinfo);
+ usb_buffer_free(device->usbdev, REPORT_MAX_SIZE,
+ device->buffer, device->buf_dma);
+ kfree(device);
+ }
+
+ info("gtco driver disconnected");
+}
+
+
+/* STANDARD MODULE LOAD ROUTINES */
+
+static struct usb_driver gtco_driverinfo_table = {
+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,16))
+ .owner = THIS_MODULE,
+#endif
+ .name = "gtco",
+ .id_table = gtco_usbid_table,
+ .probe = gtco_probe,
+ .disconnect = gtco_disconnect,
+};
+/*
+ * Register this module with the USB subsystem
+ */
+static int __init gtco_init(void)
+{
+ int rc;
+ rc = usb_register(>co_driverinfo_table);
+ if (rc) {
+ err("usb_register() failed rc=0x%x", rc);
+ }
+ printk("GTCO usb driver version: %s",GTCO_VERSION);
+ return rc;
+}
+
+/*
+ * Deregister this module with the USB subsystem
+ */
+static void __exit gtco_exit(void)
+{
+ usb_deregister(>co_driverinfo_table);
+}
+
+module_init (gtco_init);
+module_exit (gtco_exit);
+
+MODULE_LICENSE("GPL");
#include <linux/hid.h>
#include <linux/hiddev.h>
+#include <linux/hid-debug.h>
#include "usbhid.h"
/*
}
}
-/*
- * Find a report field with a specified HID usage.
- */
-#if 0
-struct hid_field *hid_find_field_by_usage(struct hid_device *hid, __u32 wanted_usage, int type)
-{
- struct hid_report *report;
- int i;
-
- list_for_each_entry(report, &hid->report_enum[type].report_list, list)
- for (i = 0; i < report->maxfield; i++)
- if (report->field[i]->logical == wanted_usage)
- return report->field[i];
- return NULL;
-}
-#endif /* 0 */
-
static int hid_submit_out(struct hid_device *hid)
{
struct hid_report *report;
{
int result, retries = 4;
- memset(buf,0,size); // Make sure we parse really received data
+ memset(buf, 0, size);
do {
result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
usb_kill_urb(usbhid->urbin);
}
-static int hidinput_open(struct input_dev *dev)
-{
- struct hid_device *hid = dev->private;
- return usbhid_open(hid);
-}
-
-static void hidinput_close(struct input_dev *dev)
-{
- struct hid_device *hid = dev->private;
- usbhid_close(hid);
-}
-
#define USB_VENDOR_ID_PANJIT 0x134c
#define USB_VENDOR_ID_TURBOX 0x062a
#define USB_DEVICE_ID_APPLE_GEYSER4_JIS 0x021c
#define USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY 0x030a
#define USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY 0x030b
+#define USB_DEVICE_ID_APPLE_IR 0x8240
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
#define USB_VENDOR_ID_IMATION 0x0718
#define USB_DEVICE_ID_DISC_STAKKA 0xd000
+#define USB_VENDOR_ID_PANTHERLORD 0x0810
+#define USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK 0x0001
+
+#define USB_VENDOR_ID_SONY 0x054c
+#define USB_DEVICE_ID_SONY_PS3_CONTROLLER 0x0268
+
/*
* Alphabetically sorted blacklist by quirk type.
*/
{ USB_VENDOR_ID_CHERRY, USB_DEVICE_ID_CHERRY_CYMOTION, HID_QUIRK_CYMOTION },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
- { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER3_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ANSI, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_ISO, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE | HID_QUIRK_POWERBOOK_ISO_KEYBOARD},
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER4_JIS, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_POWERBOOK_HAS_FN | HID_QUIRK_IGNORE_MOUSE },
+
+ { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_IR, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0001, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_PANJIT, 0x0002, HID_QUIRK_IGNORE },
{ USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_USB_RECEIVER, HID_QUIRK_BAD_RELATIVE_KEYS },
+ { USB_VENDOR_ID_PANTHERLORD, USB_DEVICE_ID_PANTHERLORD_TWIN_USB_JOYSTICK, HID_QUIRK_MULTI_INPUT | HID_QUIRK_SKIP_OUTPUT_REPORTS },
+
+ { USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS3_CONTROLLER, HID_QUIRK_SONY_PS3_CONTROLLER },
+
{ 0, 0 }
};
}
}
+/*
+ * Sending HID_REQ_GET_REPORT changes the operation mode of the ps3 controller
+ * to "operational". Without this, the ps3 controller will not report any
+ * events.
+ */
+static void hid_fixup_sony_ps3_controller(struct usb_device *dev, int ifnum)
+{
+ int result;
+ char *buf = kmalloc(18, GFP_KERNEL);
+
+ if (!buf)
+ return;
+
+ result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+ HID_REQ_GET_REPORT,
+ USB_DIR_IN | USB_TYPE_CLASS |
+ USB_RECIP_INTERFACE,
+ (3 << 8) | 0xf2, ifnum, buf, 17,
+ USB_CTRL_GET_TIMEOUT);
+
+ if (result < 0)
+ err("%s failed: %d\n", __func__, result);
+
+ kfree(buf);
+}
+
static struct hid_device *usb_hid_configure(struct usb_interface *intf)
{
struct usb_host_interface *interface = intf->cur_altsetting;
if (quirks & HID_QUIRK_IGNORE)
return NULL;
+ if ((quirks & HID_QUIRK_IGNORE_MOUSE) &&
+ (interface->desc.bInterfaceProtocol == USB_INTERFACE_PROTOCOL_MOUSE))
+ return NULL;
+
+
if (usb_get_extra_descriptor(interface, HID_DT_HID, &hdesc) &&
(!interface->desc.bNumEndpoints ||
usb_get_extra_descriptor(&interface->endpoint[0], HID_DT_HID, &hdesc))) {
usbhid->urbctrl->transfer_dma = usbhid->ctrlbuf_dma;
usbhid->urbctrl->transfer_flags |= (URB_NO_TRANSFER_DMA_MAP | URB_NO_SETUP_DMA_MAP);
hid->hidinput_input_event = usb_hidinput_input_event;
- hid->hidinput_open = hidinput_open;
- hid->hidinput_close = hidinput_close;
+ hid->hid_open = usbhid_open;
+ hid->hid_close = usbhid_close;
#ifdef CONFIG_USB_HIDDEV
hid->hiddev_hid_event = hiddev_hid_event;
hid->hiddev_report_event = hiddev_report_event;
return -ENODEV;
}
- /* This only gets called when we are a single-input (most of the
- * time). IOW, not a HID_QUIRK_MULTI_INPUT. The hid_ff_init() is
- * only useful in this case, and not for multi-input quirks. */
- if ((hid->claimed & HID_CLAIMED_INPUT) &&
- !(hid->quirks & HID_QUIRK_MULTI_INPUT))
+ if ((hid->claimed & HID_CLAIMED_INPUT))
hid_ff_init(hid);
+ if (hid->quirks & HID_QUIRK_SONY_PS3_CONTROLLER)
+ hid_fixup_sony_ps3_controller(interface_to_usbdev(intf),
+ intf->cur_altsetting->desc.bInterfaceNumber);
+
printk(KERN_INFO);
if (hid->claimed & HID_CLAIMED_INPUT)
{ 0x46d, 0xc295, hid_lgff_init }, /* Logitech MOMO force wheel */
{ 0x46d, 0xc219, hid_lgff_init }, /* Logitech Cordless rumble pad 2 */
#endif
+#ifdef CONFIG_PANTHERLORD_FF
+ { 0x810, 0x0001, hid_plff_init },
+#endif
#ifdef CONFIG_THRUSTMASTER_FF
{ 0x44f, 0xb304, hid_tmff_init },
#endif
#include <linux/hid.h>
#include "usbhid.h"
-struct device_type {
+struct dev_type {
u16 idVendor;
u16 idProduct;
const signed short *ff;
-1
};
-static const struct device_type devices[] = {
+static const struct dev_type devices[] = {
{ 0x046d, 0xc211, ff_rumble },
{ 0x046d, 0xc219, ff_rumble },
{ 0x046d, 0xc283, ff_joystick },
--- /dev/null
+/*
+ * Force feedback support for PantherLord USB/PS2 2in1 Adapter devices
+ *
+ * Copyright (c) 2007 Anssi Hannula <anssi.hannula@gmail.com>
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+
+/* #define DEBUG */
+
+#define debug(format, arg...) pr_debug("hid-plff: " format "\n" , ## arg)
+
+#include <linux/input.h>
+#include <linux/usb.h>
+#include <linux/hid.h>
+#include "usbhid.h"
+
+struct plff_device {
+ struct hid_report *report;
+};
+
+static int hid_plff_play(struct input_dev *dev, void *data,
+ struct ff_effect *effect)
+{
+ struct hid_device *hid = dev->private;
+ struct plff_device *plff = data;
+ int left, right;
+
+ left = effect->u.rumble.strong_magnitude;
+ right = effect->u.rumble.weak_magnitude;
+ debug("called with 0x%04x 0x%04x", left, right);
+
+ left = left * 0x7f / 0xffff;
+ right = right * 0x7f / 0xffff;
+
+ plff->report->field[0]->value[2] = left;
+ plff->report->field[0]->value[3] = right;
+ debug("running with 0x%02x 0x%02x", left, right);
+ usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
+
+ return 0;
+}
+
+int hid_plff_init(struct hid_device *hid)
+{
+ struct plff_device *plff;
+ struct hid_report *report;
+ struct hid_input *hidinput;
+ struct list_head *report_list =
+ &hid->report_enum[HID_OUTPUT_REPORT].report_list;
+ struct list_head *report_ptr = report_list;
+ struct input_dev *dev;
+ int error;
+
+ /* The device contains 2 output reports (one for each
+ HID_QUIRK_MULTI_INPUT device), both containing 1 field, which
+ contains 4 ff00.0002 usages and 4 16bit absolute values.
+
+ The 2 input reports also contain a field which contains
+ 8 ff00.0001 usages and 8 boolean values. Their meaning is
+ currently unknown. */
+
+ if (list_empty(report_list)) {
+ printk(KERN_ERR "hid-plff: no output reports found\n");
+ return -ENODEV;
+ }
+
+ list_for_each_entry(hidinput, &hid->inputs, list) {
+
+ report_ptr = report_ptr->next;
+
+ if (report_ptr == report_list) {
+ printk(KERN_ERR "hid-plff: required output report is missing\n");
+ return -ENODEV;
+ }
+
+ report = list_entry(report_ptr, struct hid_report, list);
+ if (report->maxfield < 1) {
+ printk(KERN_ERR "hid-plff: no fields in the report\n");
+ return -ENODEV;
+ }
+
+ if (report->field[0]->report_count < 4) {
+ printk(KERN_ERR "hid-plff: not enough values in the field\n");
+ return -ENODEV;
+ }
+
+ plff = kzalloc(sizeof(struct plff_device), GFP_KERNEL);
+ if (!plff)
+ return -ENOMEM;
+
+ dev = hidinput->input;
+
+ set_bit(FF_RUMBLE, dev->ffbit);
+
+ error = input_ff_create_memless(dev, plff, hid_plff_play);
+ if (error) {
+ kfree(plff);
+ return error;
+ }
+
+ plff->report = report;
+ plff->report->field[0]->value[0] = 0x00;
+ plff->report->field[0]->value[1] = 0x00;
+ plff->report->field[0]->value[2] = 0x00;
+ plff->report->field[0]->value[3] = 0x00;
+ usbhid_submit_report(hid, plff->report, USB_DIR_OUT);
+ }
+
+ printk(KERN_INFO "hid-plff: Force feedback for PantherLord USB/PS2 "
+ "2in1 Adapters by Anssi Hannula <anssi.hannula@gmail.com>\n");
+
+ return 0;
+}
/* prevent a race condition with open() */
mutex_lock(&disconnect_mutex);
- dev = (struct usb_idmouse *) file->private_data;
+ dev = file->private_data;
if (dev == NULL) {
mutex_unlock(&disconnect_mutex);
static ssize_t idmouse_read(struct file *file, char __user *buffer, size_t count,
loff_t * ppos)
{
- struct usb_idmouse *dev;
+ struct usb_idmouse *dev = file->private_data;
int result;
- dev = (struct usb_idmouse *) file->private_data;
-
/* lock this object */
- down (&dev->sem);
+ down(&dev->sem);
/* verify that the device wasn't unplugged */
if (!dev->present) {
- up (&dev->sem);
+ up(&dev->sem);
return -ENODEV;
}
char *obuf, *ibuf; /* transfer buffers */
char bulk_in_ep, bulk_out_ep; /* Endpoint assignments */
wait_queue_head_t wait_q; /* for timeouts */
- struct semaphore lock; /* general race avoidance */
+ struct mutex lock; /* general race avoidance */
};
static struct rio_usb_data rio_instance;
{
struct rio_usb_data *rio = &rio_instance;
- down(&(rio->lock));
+ mutex_lock(&(rio->lock));
if (rio->isopen || !rio->present) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return -EBUSY;
}
rio->isopen = 1;
init_waitqueue_head(&rio->wait_q);
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
info("Rio opened.");
int retries;
int retval=0;
- down(&(rio->lock));
+ mutex_lock(&(rio->lock));
/* Sanity check to make sure rio is connected, powered, etc */
if ( rio == NULL ||
rio->present == 0 ||
err_out:
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return retval;
}
int result = 0;
int maxretry;
int errn = 0;
+ int intr;
- down(&(rio->lock));
+ intr = mutex_lock_interruptible(&(rio->lock));
+ if (intr)
+ return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if ( rio == NULL ||
rio->present == 0 ||
rio->rio_dev == NULL )
{
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return -ENODEV;
}
goto error;
}
if (signal_pending(current)) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EINTR;
}
buffer += copy_size;
} while (count > 0);
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return bytes_written ? bytes_written : -EIO;
error:
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return errn;
}
int result;
int maxretry = 10;
char *ibuf;
+ int intr;
- down(&(rio->lock));
+ intr = mutex_lock_interruptible(&(rio->lock));
+ if (intr)
+ return -EINTR;
/* Sanity check to make sure rio is connected, powered, etc */
if ( rio == NULL ||
rio->present == 0 ||
rio->rio_dev == NULL )
{
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return -ENODEV;
}
while (count > 0) {
if (signal_pending(current)) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return read_count ? read_count : -EINTR;
}
if (!rio->rio_dev) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return -ENODEV;
}
this_read = (count >= IBUF_SIZE) ? IBUF_SIZE : count;
count = this_read = partial;
} else if (result == -ETIMEDOUT || result == 15) { /* FIXME: 15 ??? */
if (!maxretry--) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
err("read_rio: maxretry timeout");
return -ETIME;
}
finish_wait(&rio->wait_q, &wait);
continue;
} else if (result != -EREMOTEIO) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
err("Read Whoops - result:%u partial:%u this_read:%u",
result, partial, this_read);
return -EIO;
} else {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return (0);
}
if (this_read) {
if (copy_to_user(buffer, ibuf, this_read)) {
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return -EFAULT;
}
count -= this_read;
buffer += this_read;
}
}
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return read_count;
}
}
dbg("probe_rio: ibuf address:%p", rio->ibuf);
- init_MUTEX(&(rio->lock));
+ mutex_init(&(rio->lock));
usb_set_intfdata (intf, rio);
rio->present = 1;
if (rio) {
usb_deregister_dev(intf, &usb_rio_class);
- down(&(rio->lock));
+ mutex_lock(&(rio->lock));
if (rio->isopen) {
rio->isopen = 0;
/* better let it finish - the release will do whats needed */
rio->rio_dev = NULL;
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
return;
}
kfree(rio->ibuf);
info("USB Rio disconnected.");
rio->present = 0;
- up(&(rio->lock));
+ mutex_unlock(&(rio->lock));
}
}
# Makefile for USB Core files and filesystem
#
-usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_dma.o
+usbmon-objs := mon_main.o mon_stat.o mon_text.o mon_bin.o mon_dma.o
# This does not use CONFIG_USB_MON because we want this to use a tristate.
obj-$(CONFIG_USB) += usbmon.o
--- /dev/null
+/*
+ * The USB Monitor, inspired by Dave Harding's USBMon.
+ *
+ * This is a binary format reader.
+ *
+ * Copyright (C) 2006 Paolo Abeni (paolo.abeni@email.it)
+ * Copyright (C) 2006 Pete Zaitcev (zaitcev@redhat.com)
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/cdev.h>
+#include <linux/usb.h>
+#include <linux/poll.h>
+#include <linux/compat.h>
+#include <linux/mm.h>
+
+#include <asm/uaccess.h>
+
+#include "usb_mon.h"
+
+/*
+ * Defined by USB 2.0 clause 9.3, table 9.2.
+ */
+#define SETUP_LEN 8
+
+/* ioctl macros */
+#define MON_IOC_MAGIC 0x92
+
+#define MON_IOCQ_URB_LEN _IO(MON_IOC_MAGIC, 1)
+/* #2 used to be MON_IOCX_URB, removed before it got into Linus tree */
+#define MON_IOCG_STATS _IOR(MON_IOC_MAGIC, 3, struct mon_bin_stats)
+#define MON_IOCT_RING_SIZE _IO(MON_IOC_MAGIC, 4)
+#define MON_IOCQ_RING_SIZE _IO(MON_IOC_MAGIC, 5)
+#define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get)
+#define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch)
+#define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8)
+#ifdef CONFIG_COMPAT
+#define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32)
+#define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32)
+#endif
+
+/*
+ * Some architectures have enormous basic pages (16KB for ia64, 64KB for ppc).
+ * But it's all right. Just use a simple way to make sure the chunk is never
+ * smaller than a page.
+ *
+ * N.B. An application does not know our chunk size.
+ *
+ * Woops, get_zeroed_page() returns a single page. I guess we're stuck with
+ * page-sized chunks for the time being.
+ */
+#define CHUNK_SIZE PAGE_SIZE
+#define CHUNK_ALIGN(x) (((x)+CHUNK_SIZE-1) & ~(CHUNK_SIZE-1))
+
+/*
+ * The magic limit was calculated so that it allows the monitoring
+ * application to pick data once in two ticks. This way, another application,
+ * which presumably drives the bus, gets to hog CPU, yet we collect our data.
+ * If HZ is 100, a 480 mbit/s bus drives 614 KB every jiffy. USB has an
+ * enormous overhead built into the bus protocol, so we need about 1000 KB.
+ *
+ * This is still too much for most cases, where we just snoop a few
+ * descriptor fetches for enumeration. So, the default is a "reasonable"
+ * amount for systems with HZ=250 and incomplete bus saturation.
+ *
+ * XXX What about multi-megabyte URBs which take minutes to transfer?
+ */
+#define BUFF_MAX CHUNK_ALIGN(1200*1024)
+#define BUFF_DFL CHUNK_ALIGN(300*1024)
+#define BUFF_MIN CHUNK_ALIGN(8*1024)
+
+/*
+ * The per-event API header (2 per URB).
+ *
+ * This structure is seen in userland as defined by the documentation.
+ */
+struct mon_bin_hdr {
+ u64 id; /* URB ID - from submission to callback */
+ unsigned char type; /* Same as in text API; extensible. */
+ unsigned char xfer_type; /* ISO, Intr, Control, Bulk */
+ unsigned char epnum; /* Endpoint number and transfer direction */
+ unsigned char devnum; /* Device address */
+ unsigned short busnum; /* Bus number */
+ char flag_setup;
+ char flag_data;
+ s64 ts_sec; /* gettimeofday */
+ s32 ts_usec; /* gettimeofday */
+ int status;
+ unsigned int len_urb; /* Length of data (submitted or actual) */
+ unsigned int len_cap; /* Delivered length */
+ unsigned char setup[SETUP_LEN]; /* Only for Control S-type */
+};
+
+/* per file statistic */
+struct mon_bin_stats {
+ u32 queued;
+ u32 dropped;
+};
+
+struct mon_bin_get {
+ struct mon_bin_hdr __user *hdr; /* Only 48 bytes, not 64. */
+ void __user *data;
+ size_t alloc; /* Length of data (can be zero) */
+};
+
+struct mon_bin_mfetch {
+ u32 __user *offvec; /* Vector of events fetched */
+ u32 nfetch; /* Number of events to fetch (out: fetched) */
+ u32 nflush; /* Number of events to flush */
+};
+
+#ifdef CONFIG_COMPAT
+struct mon_bin_get32 {
+ u32 hdr32;
+ u32 data32;
+ u32 alloc32;
+};
+
+struct mon_bin_mfetch32 {
+ u32 offvec32;
+ u32 nfetch32;
+ u32 nflush32;
+};
+#endif
+
+/* Having these two values same prevents wrapping of the mon_bin_hdr */
+#define PKT_ALIGN 64
+#define PKT_SIZE 64
+
+/* max number of USB bus supported */
+#define MON_BIN_MAX_MINOR 128
+
+/*
+ * The buffer: map of used pages.
+ */
+struct mon_pgmap {
+ struct page *pg;
+ unsigned char *ptr; /* XXX just use page_to_virt everywhere? */
+};
+
+/*
+ * This gets associated with an open file struct.
+ */
+struct mon_reader_bin {
+ /* The buffer: one per open. */
+ spinlock_t b_lock; /* Protect b_cnt, b_in */
+ unsigned int b_size; /* Current size of the buffer - bytes */
+ unsigned int b_cnt; /* Bytes used */
+ unsigned int b_in, b_out; /* Offsets into buffer - bytes */
+ unsigned int b_read; /* Amount of read data in curr. pkt. */
+ struct mon_pgmap *b_vec; /* The map array */
+ wait_queue_head_t b_wait; /* Wait for data here */
+
+ struct mutex fetch_lock; /* Protect b_read, b_out */
+ int mmap_active;
+
+ /* A list of these is needed for "bus 0". Some time later. */
+ struct mon_reader r;
+
+ /* Stats */
+ unsigned int cnt_lost;
+};
+
+static inline struct mon_bin_hdr *MON_OFF2HDR(const struct mon_reader_bin *rp,
+ unsigned int offset)
+{
+ return (struct mon_bin_hdr *)
+ (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE);
+}
+
+#define MON_RING_EMPTY(rp) ((rp)->b_cnt == 0)
+
+static dev_t mon_bin_dev0;
+static struct cdev mon_bin_cdev;
+
+static void mon_buff_area_fill(const struct mon_reader_bin *rp,
+ unsigned int offset, unsigned int size);
+static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp);
+static int mon_alloc_buff(struct mon_pgmap *map, int npages);
+static void mon_free_buff(struct mon_pgmap *map, int npages);
+
+/*
+ * This is a "chunked memcpy". It does not manipulate any counters.
+ * But it returns the new offset for repeated application.
+ */
+unsigned int mon_copy_to_buff(const struct mon_reader_bin *this,
+ unsigned int off, const unsigned char *from, unsigned int length)
+{
+ unsigned int step_len;
+ unsigned char *buf;
+ unsigned int in_page;
+
+ while (length) {
+ /*
+ * Determine step_len.
+ */
+ step_len = length;
+ in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1));
+ if (in_page < step_len)
+ step_len = in_page;
+
+ /*
+ * Copy data and advance pointers.
+ */
+ buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE;
+ memcpy(buf, from, step_len);
+ if ((off += step_len) >= this->b_size) off = 0;
+ from += step_len;
+ length -= step_len;
+ }
+ return off;
+}
+
+/*
+ * This is a little worse than the above because it's "chunked copy_to_user".
+ * The return value is an error code, not an offset.
+ */
+static int copy_from_buf(const struct mon_reader_bin *this, unsigned int off,
+ char __user *to, int length)
+{
+ unsigned int step_len;
+ unsigned char *buf;
+ unsigned int in_page;
+
+ while (length) {
+ /*
+ * Determine step_len.
+ */
+ step_len = length;
+ in_page = CHUNK_SIZE - (off & (CHUNK_SIZE-1));
+ if (in_page < step_len)
+ step_len = in_page;
+
+ /*
+ * Copy data and advance pointers.
+ */
+ buf = this->b_vec[off / CHUNK_SIZE].ptr + off % CHUNK_SIZE;
+ if (copy_to_user(to, buf, step_len))
+ return -EINVAL;
+ if ((off += step_len) >= this->b_size) off = 0;
+ to += step_len;
+ length -= step_len;
+ }
+ return 0;
+}
+
+/*
+ * Allocate an (aligned) area in the buffer.
+ * This is called under b_lock.
+ * Returns ~0 on failure.
+ */
+static unsigned int mon_buff_area_alloc(struct mon_reader_bin *rp,
+ unsigned int size)
+{
+ unsigned int offset;
+
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ if (rp->b_cnt + size > rp->b_size)
+ return ~0;
+ offset = rp->b_in;
+ rp->b_cnt += size;
+ if ((rp->b_in += size) >= rp->b_size)
+ rp->b_in -= rp->b_size;
+ return offset;
+}
+
+/*
+ * This is the same thing as mon_buff_area_alloc, only it does not allow
+ * buffers to wrap. This is needed by applications which pass references
+ * into mmap-ed buffers up their stacks (libpcap can do that).
+ *
+ * Currently, we always have the header stuck with the data, although
+ * it is not strictly speaking necessary.
+ *
+ * When a buffer would wrap, we place a filler packet to mark the space.
+ */
+static unsigned int mon_buff_area_alloc_contiguous(struct mon_reader_bin *rp,
+ unsigned int size)
+{
+ unsigned int offset;
+ unsigned int fill_size;
+
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ if (rp->b_cnt + size > rp->b_size)
+ return ~0;
+ if (rp->b_in + size > rp->b_size) {
+ /*
+ * This would wrap. Find if we still have space after
+ * skipping to the end of the buffer. If we do, place
+ * a filler packet and allocate a new packet.
+ */
+ fill_size = rp->b_size - rp->b_in;
+ if (rp->b_cnt + size + fill_size > rp->b_size)
+ return ~0;
+ mon_buff_area_fill(rp, rp->b_in, fill_size);
+
+ offset = 0;
+ rp->b_in = size;
+ rp->b_cnt += size + fill_size;
+ } else if (rp->b_in + size == rp->b_size) {
+ offset = rp->b_in;
+ rp->b_in = 0;
+ rp->b_cnt += size;
+ } else {
+ offset = rp->b_in;
+ rp->b_in += size;
+ rp->b_cnt += size;
+ }
+ return offset;
+}
+
+/*
+ * Return a few (kilo-)bytes to the head of the buffer.
+ * This is used if a DMA fetch fails.
+ */
+static void mon_buff_area_shrink(struct mon_reader_bin *rp, unsigned int size)
+{
+
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ rp->b_cnt -= size;
+ if (rp->b_in < size)
+ rp->b_in += rp->b_size;
+ rp->b_in -= size;
+}
+
+/*
+ * This has to be called under both b_lock and fetch_lock, because
+ * it accesses both b_cnt and b_out.
+ */
+static void mon_buff_area_free(struct mon_reader_bin *rp, unsigned int size)
+{
+
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ rp->b_cnt -= size;
+ if ((rp->b_out += size) >= rp->b_size)
+ rp->b_out -= rp->b_size;
+}
+
+static void mon_buff_area_fill(const struct mon_reader_bin *rp,
+ unsigned int offset, unsigned int size)
+{
+ struct mon_bin_hdr *ep;
+
+ ep = MON_OFF2HDR(rp, offset);
+ memset(ep, 0, PKT_SIZE);
+ ep->type = '@';
+ ep->len_cap = size - PKT_SIZE;
+}
+
+static inline char mon_bin_get_setup(unsigned char *setupb,
+ const struct urb *urb, char ev_type)
+{
+
+ if (!usb_pipecontrol(urb->pipe) || ev_type != 'S')
+ return '-';
+
+ if (urb->transfer_flags & URB_NO_SETUP_DMA_MAP)
+ return mon_dmapeek(setupb, urb->setup_dma, SETUP_LEN);
+ if (urb->setup_packet == NULL)
+ return 'Z';
+
+ memcpy(setupb, urb->setup_packet, SETUP_LEN);
+ return 0;
+}
+
+static char mon_bin_get_data(const struct mon_reader_bin *rp,
+ unsigned int offset, struct urb *urb, unsigned int length)
+{
+
+ if (urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) {
+ mon_dmapeek_vec(rp, offset, urb->transfer_dma, length);
+ return 0;
+ }
+
+ if (urb->transfer_buffer == NULL)
+ return 'Z';
+
+ mon_copy_to_buff(rp, offset, urb->transfer_buffer, length);
+ return 0;
+}
+
+static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb,
+ char ev_type)
+{
+ unsigned long flags;
+ struct timeval ts;
+ unsigned int urb_length;
+ unsigned int offset;
+ unsigned int length;
+ struct mon_bin_hdr *ep;
+ char data_tag = 0;
+
+ do_gettimeofday(&ts);
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+
+ /*
+ * Find the maximum allowable length, then allocate space.
+ */
+ urb_length = (ev_type == 'S') ?
+ urb->transfer_buffer_length : urb->actual_length;
+ length = urb_length;
+
+ if (length >= rp->b_size/5)
+ length = rp->b_size/5;
+
+ if (usb_pipein(urb->pipe)) {
+ if (ev_type == 'S') {
+ length = 0;
+ data_tag = '<';
+ }
+ } else {
+ if (ev_type == 'C') {
+ length = 0;
+ data_tag = '>';
+ }
+ }
+
+ if (rp->mmap_active)
+ offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE);
+ else
+ offset = mon_buff_area_alloc(rp, length + PKT_SIZE);
+ if (offset == ~0) {
+ rp->cnt_lost++;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ return;
+ }
+
+ ep = MON_OFF2HDR(rp, offset);
+ if ((offset += PKT_SIZE) >= rp->b_size) offset = 0;
+
+ /*
+ * Fill the allocated area.
+ */
+ memset(ep, 0, PKT_SIZE);
+ ep->type = ev_type;
+ ep->xfer_type = usb_pipetype(urb->pipe);
+ /* We use the fact that usb_pipein() returns 0x80 */
+ ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
+ ep->devnum = usb_pipedevice(urb->pipe);
+ ep->busnum = rp->r.m_bus->u_bus->busnum;
+ ep->id = (unsigned long) urb;
+ ep->ts_sec = ts.tv_sec;
+ ep->ts_usec = ts.tv_usec;
+ ep->status = urb->status;
+ ep->len_urb = urb_length;
+ ep->len_cap = length;
+
+ ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type);
+ if (length != 0) {
+ ep->flag_data = mon_bin_get_data(rp, offset, urb, length);
+ if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */
+ ep->len_cap = 0;
+ mon_buff_area_shrink(rp, length);
+ }
+ } else {
+ ep->flag_data = data_tag;
+ }
+
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ wake_up(&rp->b_wait);
+}
+
+static void mon_bin_submit(void *data, struct urb *urb)
+{
+ struct mon_reader_bin *rp = data;
+ mon_bin_event(rp, urb, 'S');
+}
+
+static void mon_bin_complete(void *data, struct urb *urb)
+{
+ struct mon_reader_bin *rp = data;
+ mon_bin_event(rp, urb, 'C');
+}
+
+static void mon_bin_error(void *data, struct urb *urb, int error)
+{
+ struct mon_reader_bin *rp = data;
+ unsigned long flags;
+ unsigned int offset;
+ struct mon_bin_hdr *ep;
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+
+ offset = mon_buff_area_alloc(rp, PKT_SIZE);
+ if (offset == ~0) {
+ /* Not incrementing cnt_lost. Just because. */
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ return;
+ }
+
+ ep = MON_OFF2HDR(rp, offset);
+
+ memset(ep, 0, PKT_SIZE);
+ ep->type = 'E';
+ ep->xfer_type = usb_pipetype(urb->pipe);
+ /* We use the fact that usb_pipein() returns 0x80 */
+ ep->epnum = usb_pipeendpoint(urb->pipe) | usb_pipein(urb->pipe);
+ ep->devnum = usb_pipedevice(urb->pipe);
+ ep->busnum = rp->r.m_bus->u_bus->busnum;
+ ep->id = (unsigned long) urb;
+ ep->status = error;
+
+ ep->flag_setup = '-';
+ ep->flag_data = 'E';
+
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ wake_up(&rp->b_wait);
+}
+
+static int mon_bin_open(struct inode *inode, struct file *file)
+{
+ struct mon_bus *mbus;
+ struct usb_bus *ubus;
+ struct mon_reader_bin *rp;
+ size_t size;
+ int rc;
+
+ mutex_lock(&mon_lock);
+ if ((mbus = mon_bus_lookup(iminor(inode))) == NULL) {
+ mutex_unlock(&mon_lock);
+ return -ENODEV;
+ }
+ if ((ubus = mbus->u_bus) == NULL) {
+ printk(KERN_ERR TAG ": consistency error on open\n");
+ mutex_unlock(&mon_lock);
+ return -ENODEV;
+ }
+
+ rp = kzalloc(sizeof(struct mon_reader_bin), GFP_KERNEL);
+ if (rp == NULL) {
+ rc = -ENOMEM;
+ goto err_alloc;
+ }
+ spin_lock_init(&rp->b_lock);
+ init_waitqueue_head(&rp->b_wait);
+ mutex_init(&rp->fetch_lock);
+
+ rp->b_size = BUFF_DFL;
+
+ size = sizeof(struct mon_pgmap) * (rp->b_size/CHUNK_SIZE);
+ if ((rp->b_vec = kzalloc(size, GFP_KERNEL)) == NULL) {
+ rc = -ENOMEM;
+ goto err_allocvec;
+ }
+
+ if ((rc = mon_alloc_buff(rp->b_vec, rp->b_size/CHUNK_SIZE)) < 0)
+ goto err_allocbuff;
+
+ rp->r.m_bus = mbus;
+ rp->r.r_data = rp;
+ rp->r.rnf_submit = mon_bin_submit;
+ rp->r.rnf_error = mon_bin_error;
+ rp->r.rnf_complete = mon_bin_complete;
+
+ mon_reader_add(mbus, &rp->r);
+
+ file->private_data = rp;
+ mutex_unlock(&mon_lock);
+ return 0;
+
+err_allocbuff:
+ kfree(rp->b_vec);
+err_allocvec:
+ kfree(rp);
+err_alloc:
+ mutex_unlock(&mon_lock);
+ return rc;
+}
+
+/*
+ * Extract an event from buffer and copy it to user space.
+ * Wait if there is no event ready.
+ * Returns zero or error.
+ */
+static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp,
+ struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes)
+{
+ unsigned long flags;
+ struct mon_bin_hdr *ep;
+ size_t step_len;
+ unsigned int offset;
+ int rc;
+
+ mutex_lock(&rp->fetch_lock);
+
+ if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+ mutex_unlock(&rp->fetch_lock);
+ return rc;
+ }
+
+ ep = MON_OFF2HDR(rp, rp->b_out);
+
+ if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) {
+ mutex_unlock(&rp->fetch_lock);
+ return -EFAULT;
+ }
+
+ step_len = min(ep->len_cap, nbytes);
+ if ((offset = rp->b_out + PKT_SIZE) >= rp->b_size) offset = 0;
+
+ if (copy_from_buf(rp, offset, data, step_len)) {
+ mutex_unlock(&rp->fetch_lock);
+ return -EFAULT;
+ }
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ rp->b_read = 0;
+
+ mutex_unlock(&rp->fetch_lock);
+ return 0;
+}
+
+static int mon_bin_release(struct inode *inode, struct file *file)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ struct mon_bus* mbus = rp->r.m_bus;
+
+ mutex_lock(&mon_lock);
+
+ if (mbus->nreaders <= 0) {
+ printk(KERN_ERR TAG ": consistency error on close\n");
+ mutex_unlock(&mon_lock);
+ return 0;
+ }
+ mon_reader_del(mbus, &rp->r);
+
+ mon_free_buff(rp->b_vec, rp->b_size/CHUNK_SIZE);
+ kfree(rp->b_vec);
+ kfree(rp);
+
+ mutex_unlock(&mon_lock);
+ return 0;
+}
+
+static ssize_t mon_bin_read(struct file *file, char __user *buf,
+ size_t nbytes, loff_t *ppos)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ unsigned long flags;
+ struct mon_bin_hdr *ep;
+ unsigned int offset;
+ size_t step_len;
+ char *ptr;
+ ssize_t done = 0;
+ int rc;
+
+ mutex_lock(&rp->fetch_lock);
+
+ if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+ mutex_unlock(&rp->fetch_lock);
+ return rc;
+ }
+
+ ep = MON_OFF2HDR(rp, rp->b_out);
+
+ if (rp->b_read < sizeof(struct mon_bin_hdr)) {
+ step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read);
+ ptr = ((char *)ep) + rp->b_read;
+ if (step_len && copy_to_user(buf, ptr, step_len)) {
+ mutex_unlock(&rp->fetch_lock);
+ return -EFAULT;
+ }
+ nbytes -= step_len;
+ buf += step_len;
+ rp->b_read += step_len;
+ done += step_len;
+ }
+
+ if (rp->b_read >= sizeof(struct mon_bin_hdr)) {
+ step_len = min(nbytes, (size_t)ep->len_cap);
+ offset = rp->b_out + PKT_SIZE;
+ offset += rp->b_read - sizeof(struct mon_bin_hdr);
+ if (offset >= rp->b_size)
+ offset -= rp->b_size;
+ if (copy_from_buf(rp, offset, buf, step_len)) {
+ mutex_unlock(&rp->fetch_lock);
+ return -EFAULT;
+ }
+ nbytes -= step_len;
+ buf += step_len;
+ rp->b_read += step_len;
+ done += step_len;
+ }
+
+ /*
+ * Check if whole packet was read, and if so, jump to the next one.
+ */
+ if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) {
+ spin_lock_irqsave(&rp->b_lock, flags);
+ mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ rp->b_read = 0;
+ }
+
+ mutex_unlock(&rp->fetch_lock);
+ return done;
+}
+
+/*
+ * Remove at most nevents from chunked buffer.
+ * Returns the number of removed events.
+ */
+static int mon_bin_flush(struct mon_reader_bin *rp, unsigned nevents)
+{
+ unsigned long flags;
+ struct mon_bin_hdr *ep;
+ int i;
+
+ mutex_lock(&rp->fetch_lock);
+ spin_lock_irqsave(&rp->b_lock, flags);
+ for (i = 0; i < nevents; ++i) {
+ if (MON_RING_EMPTY(rp))
+ break;
+
+ ep = MON_OFF2HDR(rp, rp->b_out);
+ mon_buff_area_free(rp, PKT_SIZE + ep->len_cap);
+ }
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ rp->b_read = 0;
+ mutex_unlock(&rp->fetch_lock);
+ return i;
+}
+
+/*
+ * Fetch at most max event offsets into the buffer and put them into vec.
+ * The events are usually freed later with mon_bin_flush.
+ * Return the effective number of events fetched.
+ */
+static int mon_bin_fetch(struct file *file, struct mon_reader_bin *rp,
+ u32 __user *vec, unsigned int max)
+{
+ unsigned int cur_out;
+ unsigned int bytes, avail;
+ unsigned int size;
+ unsigned int nevents;
+ struct mon_bin_hdr *ep;
+ unsigned long flags;
+ int rc;
+
+ mutex_lock(&rp->fetch_lock);
+
+ if ((rc = mon_bin_wait_event(file, rp)) < 0) {
+ mutex_unlock(&rp->fetch_lock);
+ return rc;
+ }
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ avail = rp->b_cnt;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ cur_out = rp->b_out;
+ nevents = 0;
+ bytes = 0;
+ while (bytes < avail) {
+ if (nevents >= max)
+ break;
+
+ ep = MON_OFF2HDR(rp, cur_out);
+ if (put_user(cur_out, &vec[nevents])) {
+ mutex_unlock(&rp->fetch_lock);
+ return -EFAULT;
+ }
+
+ nevents++;
+ size = ep->len_cap + PKT_SIZE;
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ if ((cur_out += size) >= rp->b_size)
+ cur_out -= rp->b_size;
+ bytes += size;
+ }
+
+ mutex_unlock(&rp->fetch_lock);
+ return nevents;
+}
+
+/*
+ * Count events. This is almost the same as the above mon_bin_fetch,
+ * only we do not store offsets into user vector, and we have no limit.
+ */
+static int mon_bin_queued(struct mon_reader_bin *rp)
+{
+ unsigned int cur_out;
+ unsigned int bytes, avail;
+ unsigned int size;
+ unsigned int nevents;
+ struct mon_bin_hdr *ep;
+ unsigned long flags;
+
+ mutex_lock(&rp->fetch_lock);
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ avail = rp->b_cnt;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ cur_out = rp->b_out;
+ nevents = 0;
+ bytes = 0;
+ while (bytes < avail) {
+ ep = MON_OFF2HDR(rp, cur_out);
+
+ nevents++;
+ size = ep->len_cap + PKT_SIZE;
+ size = (size + PKT_ALIGN-1) & ~(PKT_ALIGN-1);
+ if ((cur_out += size) >= rp->b_size)
+ cur_out -= rp->b_size;
+ bytes += size;
+ }
+
+ mutex_unlock(&rp->fetch_lock);
+ return nevents;
+}
+
+/*
+ */
+static int mon_bin_ioctl(struct inode *inode, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ // struct mon_bus* mbus = rp->r.m_bus;
+ int ret = 0;
+ struct mon_bin_hdr *ep;
+ unsigned long flags;
+
+ switch (cmd) {
+
+ case MON_IOCQ_URB_LEN:
+ /*
+ * N.B. This only returns the size of data, without the header.
+ */
+ spin_lock_irqsave(&rp->b_lock, flags);
+ if (!MON_RING_EMPTY(rp)) {
+ ep = MON_OFF2HDR(rp, rp->b_out);
+ ret = ep->len_cap;
+ }
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ break;
+
+ case MON_IOCQ_RING_SIZE:
+ ret = rp->b_size;
+ break;
+
+ case MON_IOCT_RING_SIZE:
+ /*
+ * Changing the buffer size will flush it's contents; the new
+ * buffer is allocated before releasing the old one to be sure
+ * the device will stay functional also in case of memory
+ * pressure.
+ */
+ {
+ int size;
+ struct mon_pgmap *vec;
+
+ if (arg < BUFF_MIN || arg > BUFF_MAX)
+ return -EINVAL;
+
+ size = CHUNK_ALIGN(arg);
+ if ((vec = kzalloc(sizeof(struct mon_pgmap) * (size/CHUNK_SIZE),
+ GFP_KERNEL)) == NULL) {
+ ret = -ENOMEM;
+ break;
+ }
+
+ ret = mon_alloc_buff(vec, size/CHUNK_SIZE);
+ if (ret < 0) {
+ kfree(vec);
+ break;
+ }
+
+ mutex_lock(&rp->fetch_lock);
+ spin_lock_irqsave(&rp->b_lock, flags);
+ mon_free_buff(rp->b_vec, size/CHUNK_SIZE);
+ kfree(rp->b_vec);
+ rp->b_vec = vec;
+ rp->b_size = size;
+ rp->b_read = rp->b_in = rp->b_out = rp->b_cnt = 0;
+ rp->cnt_lost = 0;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ mutex_unlock(&rp->fetch_lock);
+ }
+ break;
+
+ case MON_IOCH_MFLUSH:
+ ret = mon_bin_flush(rp, arg);
+ break;
+
+ case MON_IOCX_GET:
+ {
+ struct mon_bin_get getb;
+
+ if (copy_from_user(&getb, (void __user *)arg,
+ sizeof(struct mon_bin_get)))
+ return -EFAULT;
+
+ if (getb.alloc > 0x10000000) /* Want to cast to u32 */
+ return -EINVAL;
+ ret = mon_bin_get_event(file, rp,
+ getb.hdr, getb.data, (unsigned int)getb.alloc);
+ }
+ break;
+
+#ifdef CONFIG_COMPAT
+ case MON_IOCX_GET32: {
+ struct mon_bin_get32 getb;
+
+ if (copy_from_user(&getb, (void __user *)arg,
+ sizeof(struct mon_bin_get32)))
+ return -EFAULT;
+
+ ret = mon_bin_get_event(file, rp,
+ compat_ptr(getb.hdr32), compat_ptr(getb.data32),
+ getb.alloc32);
+ }
+ break;
+#endif
+
+ case MON_IOCX_MFETCH:
+ {
+ struct mon_bin_mfetch mfetch;
+ struct mon_bin_mfetch __user *uptr;
+
+ uptr = (struct mon_bin_mfetch __user *)arg;
+
+ if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+ return -EFAULT;
+
+ if (mfetch.nflush) {
+ ret = mon_bin_flush(rp, mfetch.nflush);
+ if (ret < 0)
+ return ret;
+ if (put_user(ret, &uptr->nflush))
+ return -EFAULT;
+ }
+ ret = mon_bin_fetch(file, rp, mfetch.offvec, mfetch.nfetch);
+ if (ret < 0)
+ return ret;
+ if (put_user(ret, &uptr->nfetch))
+ return -EFAULT;
+ ret = 0;
+ }
+ break;
+
+#ifdef CONFIG_COMPAT
+ case MON_IOCX_MFETCH32:
+ {
+ struct mon_bin_mfetch32 mfetch;
+ struct mon_bin_mfetch32 __user *uptr;
+
+ uptr = (struct mon_bin_mfetch32 __user *) compat_ptr(arg);
+
+ if (copy_from_user(&mfetch, uptr, sizeof(mfetch)))
+ return -EFAULT;
+
+ if (mfetch.nflush32) {
+ ret = mon_bin_flush(rp, mfetch.nflush32);
+ if (ret < 0)
+ return ret;
+ if (put_user(ret, &uptr->nflush32))
+ return -EFAULT;
+ }
+ ret = mon_bin_fetch(file, rp, compat_ptr(mfetch.offvec32),
+ mfetch.nfetch32);
+ if (ret < 0)
+ return ret;
+ if (put_user(ret, &uptr->nfetch32))
+ return -EFAULT;
+ ret = 0;
+ }
+ break;
+#endif
+
+ case MON_IOCG_STATS: {
+ struct mon_bin_stats __user *sp;
+ unsigned int nevents;
+ unsigned int ndropped;
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ ndropped = rp->cnt_lost;
+ rp->cnt_lost = 0;
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ nevents = mon_bin_queued(rp);
+
+ sp = (struct mon_bin_stats __user *)arg;
+ if (put_user(rp->cnt_lost, &sp->dropped))
+ return -EFAULT;
+ if (put_user(nevents, &sp->queued))
+ return -EFAULT;
+
+ }
+ break;
+
+ default:
+ return -ENOTTY;
+ }
+
+ return ret;
+}
+
+static unsigned int
+mon_bin_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct mon_reader_bin *rp = file->private_data;
+ unsigned int mask = 0;
+ unsigned long flags;
+
+ if (file->f_mode & FMODE_READ)
+ poll_wait(file, &rp->b_wait, wait);
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ if (!MON_RING_EMPTY(rp))
+ mask |= POLLIN | POLLRDNORM; /* readable */
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+ return mask;
+}
+
+/*
+ * open and close: just keep track of how many times the device is
+ * mapped, to use the proper memory allocation function.
+ */
+static void mon_bin_vma_open(struct vm_area_struct *vma)
+{
+ struct mon_reader_bin *rp = vma->vm_private_data;
+ rp->mmap_active++;
+}
+
+static void mon_bin_vma_close(struct vm_area_struct *vma)
+{
+ struct mon_reader_bin *rp = vma->vm_private_data;
+ rp->mmap_active--;
+}
+
+/*
+ * Map ring pages to user space.
+ */
+struct page *mon_bin_vma_nopage(struct vm_area_struct *vma,
+ unsigned long address, int *type)
+{
+ struct mon_reader_bin *rp = vma->vm_private_data;
+ unsigned long offset, chunk_idx;
+ struct page *pageptr;
+
+ offset = (address - vma->vm_start) + (vma->vm_pgoff << PAGE_SHIFT);
+ if (offset >= rp->b_size)
+ return NOPAGE_SIGBUS;
+ chunk_idx = offset / CHUNK_SIZE;
+ pageptr = rp->b_vec[chunk_idx].pg;
+ get_page(pageptr);
+ if (type)
+ *type = VM_FAULT_MINOR;
+ return pageptr;
+}
+
+struct vm_operations_struct mon_bin_vm_ops = {
+ .open = mon_bin_vma_open,
+ .close = mon_bin_vma_close,
+ .nopage = mon_bin_vma_nopage,
+};
+
+int mon_bin_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ /* don't do anything here: "nopage" will set up page table entries */
+ vma->vm_ops = &mon_bin_vm_ops;
+ vma->vm_flags |= VM_RESERVED;
+ vma->vm_private_data = filp->private_data;
+ mon_bin_vma_open(vma);
+ return 0;
+}
+
+struct file_operations mon_fops_binary = {
+ .owner = THIS_MODULE,
+ .open = mon_bin_open,
+ .llseek = no_llseek,
+ .read = mon_bin_read,
+ /* .write = mon_text_write, */
+ .poll = mon_bin_poll,
+ .ioctl = mon_bin_ioctl,
+ .release = mon_bin_release,
+};
+
+static int mon_bin_wait_event(struct file *file, struct mon_reader_bin *rp)
+{
+ DECLARE_WAITQUEUE(waita, current);
+ unsigned long flags;
+
+ add_wait_queue(&rp->b_wait, &waita);
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ while (MON_RING_EMPTY(rp)) {
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ if (file->f_flags & O_NONBLOCK) {
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&rp->b_wait, &waita);
+ return -EWOULDBLOCK; /* Same as EAGAIN in Linux */
+ }
+ schedule();
+ if (signal_pending(current)) {
+ remove_wait_queue(&rp->b_wait, &waita);
+ return -EINTR;
+ }
+ set_current_state(TASK_INTERRUPTIBLE);
+
+ spin_lock_irqsave(&rp->b_lock, flags);
+ }
+ spin_unlock_irqrestore(&rp->b_lock, flags);
+
+ set_current_state(TASK_RUNNING);
+ remove_wait_queue(&rp->b_wait, &waita);
+ return 0;
+}
+
+static int mon_alloc_buff(struct mon_pgmap *map, int npages)
+{
+ int n;
+ unsigned long vaddr;
+
+ for (n = 0; n < npages; n++) {
+ vaddr = get_zeroed_page(GFP_KERNEL);
+ if (vaddr == 0) {
+ while (n-- != 0)
+ free_page((unsigned long) map[n].ptr);
+ return -ENOMEM;
+ }
+ map[n].ptr = (unsigned char *) vaddr;
+ map[n].pg = virt_to_page(vaddr);
+ }
+ return 0;
+}
+
+static void mon_free_buff(struct mon_pgmap *map, int npages)
+{
+ int n;
+
+ for (n = 0; n < npages; n++)
+ free_page((unsigned long) map[n].ptr);
+}
+
+int __init mon_bin_init(void)
+{
+ int rc;
+
+ rc = alloc_chrdev_region(&mon_bin_dev0, 0, MON_BIN_MAX_MINOR, "usbmon");
+ if (rc < 0)
+ goto err_dev;
+
+ cdev_init(&mon_bin_cdev, &mon_fops_binary);
+ mon_bin_cdev.owner = THIS_MODULE;
+
+ rc = cdev_add(&mon_bin_cdev, mon_bin_dev0, MON_BIN_MAX_MINOR);
+ if (rc < 0)
+ goto err_add;
+
+ return 0;
+
+err_add:
+ unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR);
+err_dev:
+ return rc;
+}
+
+void __exit mon_bin_exit(void)
+{
+ cdev_del(&mon_bin_cdev);
+ unregister_chrdev_region(mon_bin_dev0, MON_BIN_MAX_MINOR);
+}
local_irq_restore(flags);
return 0;
}
+
+void mon_dmapeek_vec(const struct mon_reader_bin *rp,
+ unsigned int offset, dma_addr_t dma_addr, unsigned int length)
+{
+ unsigned long flags;
+ unsigned int step_len;
+ struct page *pg;
+ unsigned char *map;
+ unsigned long page_off, page_len;
+
+ local_irq_save(flags);
+ while (length) {
+ /* compute number of bytes we are going to copy in this page */
+ step_len = length;
+ page_off = dma_addr & (PAGE_SIZE-1);
+ page_len = PAGE_SIZE - page_off;
+ if (page_len < step_len)
+ step_len = page_len;
+
+ /* copy data and advance pointers */
+ pg = phys_to_page(dma_addr);
+ map = kmap_atomic(pg, KM_IRQ0);
+ offset = mon_copy_to_buff(rp, offset, map + page_off, step_len);
+ kunmap_atomic(map, KM_IRQ0);
+ dma_addr += step_len;
+ length -= step_len;
+ }
+ local_irq_restore(flags);
+}
+
#endif /* __i386__ */
#ifndef MON_HAS_UNMAP
{
return 'D';
}
-#endif
+
+void mon_dmapeek_vec(const struct mon_reader_bin *rp,
+ unsigned int offset, dma_addr_t dma_addr, unsigned int length)
+{
+ ;
+}
+
+#endif /* MON_HAS_UNMAP */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
-#include <linux/debugfs.h>
#include <linux/smp_lock.h>
#include <linux/notifier.h>
#include <linux/mutex.h>
static void mon_stop(struct mon_bus *mbus);
static void mon_dissolve(struct mon_bus *mbus, struct usb_bus *ubus);
static void mon_bus_drop(struct kref *r);
-static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus);
+static void mon_bus_init(struct usb_bus *ubus);
DEFINE_MUTEX(mon_lock);
-static struct dentry *mon_dir; /* /dbg/usbmon */
static LIST_HEAD(mon_buses); /* All buses we know: struct mon_bus */
/*
*/
static void mon_bus_add(struct usb_bus *ubus)
{
- mon_bus_init(mon_dir, ubus);
+ mon_bus_init(ubus);
}
/*
mutex_lock(&mon_lock);
list_del(&mbus->bus_link);
- debugfs_remove(mbus->dent_t);
- debugfs_remove(mbus->dent_s);
+ if (mbus->text_inited)
+ mon_text_del(mbus);
mon_dissolve(mbus, ubus);
kref_put(&mbus->ref, mon_bus_drop);
* - refcount USB bus struct
* - link
*/
-static void mon_bus_init(struct dentry *mondir, struct usb_bus *ubus)
+static void mon_bus_init(struct usb_bus *ubus)
{
- struct dentry *d;
struct mon_bus *mbus;
- enum { NAMESZ = 10 };
- char name[NAMESZ];
- int rc;
if ((mbus = kzalloc(sizeof(struct mon_bus), GFP_KERNEL)) == NULL)
goto err_alloc;
ubus->mon_bus = mbus;
mbus->uses_dma = ubus->uses_dma;
- rc = snprintf(name, NAMESZ, "%dt", ubus->busnum);
- if (rc <= 0 || rc >= NAMESZ)
- goto err_print_t;
- d = debugfs_create_file(name, 0600, mondir, mbus, &mon_fops_text);
- if (d == NULL)
- goto err_create_t;
- mbus->dent_t = d;
-
- rc = snprintf(name, NAMESZ, "%ds", ubus->busnum);
- if (rc <= 0 || rc >= NAMESZ)
- goto err_print_s;
- d = debugfs_create_file(name, 0600, mondir, mbus, &mon_fops_stat);
- if (d == NULL)
- goto err_create_s;
- mbus->dent_s = d;
+ mbus->text_inited = mon_text_add(mbus, ubus);
+ // mon_bin_add(...)
mutex_lock(&mon_lock);
list_add_tail(&mbus->bus_link, &mon_buses);
mutex_unlock(&mon_lock);
return;
-err_create_s:
-err_print_s:
- debugfs_remove(mbus->dent_t);
-err_create_t:
-err_print_t:
- kfree(mbus);
err_alloc:
return;
}
+/*
+ * Search a USB bus by number. Notice that USB bus numbers start from one,
+ * which we may later use to identify "all" with zero.
+ *
+ * This function must be called with mon_lock held.
+ *
+ * This is obviously inefficient and may be revised in the future.
+ */
+struct mon_bus *mon_bus_lookup(unsigned int num)
+{
+ struct list_head *p;
+ struct mon_bus *mbus;
+
+ list_for_each (p, &mon_buses) {
+ mbus = list_entry(p, struct mon_bus, bus_link);
+ if (mbus->u_bus->busnum == num) {
+ return mbus;
+ }
+ }
+ return NULL;
+}
+
static int __init mon_init(void)
{
struct usb_bus *ubus;
- struct dentry *mondir;
+ int rc;
- mondir = debugfs_create_dir("usbmon", NULL);
- if (IS_ERR(mondir)) {
- printk(KERN_NOTICE TAG ": debugfs is not available\n");
- return -ENODEV;
- }
- if (mondir == NULL) {
- printk(KERN_NOTICE TAG ": unable to create usbmon directory\n");
- return -ENODEV;
- }
- mon_dir = mondir;
+ if ((rc = mon_text_init()) != 0)
+ goto err_text;
+ if ((rc = mon_bin_init()) != 0)
+ goto err_bin;
if (usb_mon_register(&mon_ops_0) != 0) {
printk(KERN_NOTICE TAG ": unable to register with the core\n");
- debugfs_remove(mondir);
- return -ENODEV;
+ rc = -ENODEV;
+ goto err_reg;
}
// MOD_INC_USE_COUNT(which_module?);
mutex_lock(&usb_bus_list_lock);
list_for_each_entry (ubus, &usb_bus_list, bus_list) {
- mon_bus_init(mondir, ubus);
+ mon_bus_init(ubus);
}
mutex_unlock(&usb_bus_list_lock);
return 0;
+
+err_reg:
+ mon_bin_exit();
+err_bin:
+ mon_text_exit();
+err_text:
+ return rc;
}
static void __exit mon_exit(void)
mbus = list_entry(p, struct mon_bus, bus_link);
list_del(p);
- debugfs_remove(mbus->dent_t);
- debugfs_remove(mbus->dent_s);
+ if (mbus->text_inited)
+ mon_text_del(mbus);
/*
* This never happens, because the open/close paths in
}
mutex_unlock(&mon_lock);
- debugfs_remove(mon_dir);
+ mon_text_exit();
+ mon_bin_exit();
}
module_init(mon_init);
#include <linux/usb.h>
#include <linux/time.h>
#include <linux/mutex.h>
+#include <linux/debugfs.h>
#include <asm/uaccess.h>
#include "usb_mon.h"
char slab_name[SLAB_NAME_SZ];
};
+static struct dentry *mon_dir; /* Usually /sys/kernel/debug/usbmon */
+
static void mon_text_ctor(void *, struct kmem_cache *, unsigned long);
/*
return 0;
}
-const struct file_operations mon_fops_text = {
+static const struct file_operations mon_fops_text = {
.owner = THIS_MODULE,
.open = mon_text_open,
.llseek = no_llseek,
.release = mon_text_release,
};
+int mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus)
+{
+ struct dentry *d;
+ enum { NAMESZ = 10 };
+ char name[NAMESZ];
+ int rc;
+
+ rc = snprintf(name, NAMESZ, "%dt", ubus->busnum);
+ if (rc <= 0 || rc >= NAMESZ)
+ goto err_print_t;
+ d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_text);
+ if (d == NULL)
+ goto err_create_t;
+ mbus->dent_t = d;
+
+ /* XXX The stats do not belong to here (text API), but oh well... */
+ rc = snprintf(name, NAMESZ, "%ds", ubus->busnum);
+ if (rc <= 0 || rc >= NAMESZ)
+ goto err_print_s;
+ d = debugfs_create_file(name, 0600, mon_dir, mbus, &mon_fops_stat);
+ if (d == NULL)
+ goto err_create_s;
+ mbus->dent_s = d;
+
+ return 1;
+
+err_create_s:
+err_print_s:
+ debugfs_remove(mbus->dent_t);
+ mbus->dent_t = NULL;
+err_create_t:
+err_print_t:
+ return 0;
+}
+
+void mon_text_del(struct mon_bus *mbus)
+{
+ debugfs_remove(mbus->dent_t);
+ debugfs_remove(mbus->dent_s);
+}
+
/*
* Slab interface: constructor.
*/
memset(mem, 0xe5, sizeof(struct mon_event_text));
}
+int __init mon_text_init(void)
+{
+ struct dentry *mondir;
+
+ mondir = debugfs_create_dir("usbmon", NULL);
+ if (IS_ERR(mondir)) {
+ printk(KERN_NOTICE TAG ": debugfs is not available\n");
+ return -ENODEV;
+ }
+ if (mondir == NULL) {
+ printk(KERN_NOTICE TAG ": unable to create usbmon directory\n");
+ return -ENODEV;
+ }
+ mon_dir = mondir;
+ return 0;
+}
+
+void __exit mon_text_exit(void)
+{
+ debugfs_remove(mon_dir);
+}
struct mon_bus {
struct list_head bus_link;
spinlock_t lock;
+ struct usb_bus *u_bus;
+
+ int text_inited;
struct dentry *dent_s; /* Debugging file */
struct dentry *dent_t; /* Text interface file */
- struct usb_bus *u_bus;
int uses_dma;
/* Ref */
void mon_reader_add(struct mon_bus *mbus, struct mon_reader *r);
void mon_reader_del(struct mon_bus *mbus, struct mon_reader *r);
+struct mon_bus *mon_bus_lookup(unsigned int num);
+
+int /*bool*/ mon_text_add(struct mon_bus *mbus, const struct usb_bus *ubus);
+void mon_text_del(struct mon_bus *mbus);
+// void mon_bin_add(struct mon_bus *);
+
+int __init mon_text_init(void);
+void __exit mon_text_exit(void);
+int __init mon_bin_init(void);
+void __exit mon_bin_exit(void);
+
/*
- */
+ * DMA interface.
+ *
+ * XXX The vectored side needs a serious re-thinking. Abstracting vectors,
+ * like in Paolo's original patch, produces a double pkmap. We need an idea.
+*/
extern char mon_dmapeek(unsigned char *dst, dma_addr_t dma_addr, int len);
+struct mon_reader_bin;
+extern void mon_dmapeek_vec(const struct mon_reader_bin *rp,
+ unsigned int offset, dma_addr_t dma_addr, unsigned int len);
+extern unsigned int mon_copy_to_buff(const struct mon_reader_bin *rp,
+ unsigned int offset, const unsigned char *from, unsigned int len);
+
+/*
+ */
extern struct mutex mon_lock;
-extern const struct file_operations mon_fops_text;
extern const struct file_operations mon_fops_stat;
#endif /* __USB_MON_H */
adapters marketed under the DeLOCK brand.
config USB_NET_RNDIS_HOST
- tristate "Host for RNDIS devices (EXPERIMENTAL)"
+ tristate "Host for RNDIS and ActiveSync devices (EXPERIMENTAL)"
depends on USB_USBNET && EXPERIMENTAL
select USB_NET_CDCETHER
help
This option enables hosting "Remote NDIS" USB networking links,
as encouraged by Microsoft (instead of CDC Ethernet!) for use in
- various devices that may only support this protocol.
+ various devices that may only support this protocol. A variant
+ of this protocol (with even less public documentation) seems to
+ be at the root of Microsoft's "ActiveSync" too.
Avoid using this protocol unless you have no better options.
The protocol specification is incomplete, and is controlled by
// Linksys USB1000
USB_DEVICE (0x1737, 0x0039),
.driver_info = (unsigned long) &ax88178_info,
+}, {
+ // IO-DATA ETG-US2
+ USB_DEVICE (0x04bb, 0x0930),
+ .driver_info = (unsigned long) &ax88178_info,
},
{ }, // END
};
/*
* CDC Ethernet based networking peripherals
* Copyright (C) 2003-2005 by David Brownell
+ * Copyright (C) 2006 by Ole Andre Vadla Ravnas (ActiveSync)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
#include "usbnet.h"
+#if defined(CONFIG_USB_NET_RNDIS_HOST) || defined(CONFIG_USB_NET_RNDIS_HOST_MODULE)
+
+static int is_rndis(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_COMM
+ && desc->bInterfaceSubClass == 2
+ && desc->bInterfaceProtocol == 0xff;
+}
+
+static int is_activesync(struct usb_interface_descriptor *desc)
+{
+ return desc->bInterfaceClass == USB_CLASS_MISC
+ && desc->bInterfaceSubClass == 1
+ && desc->bInterfaceProtocol == 1;
+}
+
+#else
+
+#define is_rndis(desc) 0
+#define is_activesync(desc) 0
+
+#endif
+
/*
* probes control interface, claims data interface, collects the bulk
* endpoints, activates data interface (if needed), maybe sets MTU.
/* this assumes that if there's a non-RNDIS vendor variant
* of cdc-acm, it'll fail RNDIS requests cleanly.
*/
- rndis = (intf->cur_altsetting->desc.bInterfaceProtocol == 0xff);
+ rndis = is_rndis(&intf->cur_altsetting->desc)
+ || is_activesync(&intf->cur_altsetting->desc);
memset(info, 0, sizeof *info);
info->control = intf;
goto bad_desc;
}
break;
+ case USB_CDC_ACM_TYPE:
+ /* paranoia: disambiguate a "real" vendor-specific
+ * modem interface from an RNDIS non-modem.
+ */
+ if (rndis) {
+ struct usb_cdc_acm_descriptor *d;
+
+ d = (void *) buf;
+ if (d->bmCapabilities) {
+ dev_dbg(&intf->dev,
+ "ACM capabilities %02x, "
+ "not really RNDIS?\n",
+ d->bmCapabilities);
+ goto bad_desc;
+ }
+ }
+ break;
case USB_CDC_UNION_TYPE:
if (info->u) {
dev_dbg(&intf->dev, "extra CDC union\n");
buf += buf [0];
}
- if (!info->header || !info->u || (!rndis && !info->ether)) {
+ /* Microsoft ActiveSync based RNDIS devices lack the CDC descriptors,
+ * so we'll hard-wire the interfaces and not check for descriptors.
+ */
+ if (is_activesync(&intf->cur_altsetting->desc) && !info->u) {
+ info->control = usb_ifnum_to_if(dev->udev, 0);
+ info->data = usb_ifnum_to_if(dev->udev, 1);
+ if (!info->control || !info->data) {
+ dev_dbg(&intf->dev,
+ "activesync: master #0/%p slave #1/%p\n",
+ info->control,
+ info->data);
+ goto bad_desc;
+ }
+
+ } else if (!info->header || !info->u || (!rndis && !info->ether)) {
dev_dbg(&intf->dev, "missing cdc %s%s%sdescriptor\n",
info->header ? "" : "header ",
info->u ? "" : "union ",
.suspend = kaweth_suspend,
.resume = kaweth_resume,
.id_table = usb_klsi_table,
+ .supports_autosuspend = 1,
};
typedef __u8 eth_addr_t[6];
struct delayed_work lowmem_work;
struct usb_device *dev;
+ struct usb_interface *intf;
struct net_device *net;
wait_queue_head_t term_wait;
dbg("Opening network device.");
+ res = usb_autopm_get_interface(kaweth->intf);
+ if (res) {
+ err("Interface cannot be resumed.");
+ return -EIO;
+ }
res = kaweth_resubmit_rx_urb(kaweth, GFP_KERNEL);
if (res)
- return -EIO;
+ goto err_out;
usb_fill_int_urb(
kaweth->irq_urb,
res = usb_submit_urb(kaweth->irq_urb, GFP_KERNEL);
if (res) {
usb_kill_urb(kaweth->rx_urb);
- return -EIO;
+ goto err_out;
}
kaweth->opened = 1;
kaweth_async_set_rx_mode(kaweth);
return 0;
+
+err_out:
+ usb_autopm_enable(kaweth->intf);
+ return -EIO;
}
/****************************************************************
- * kaweth_close
+ * kaweth_kill_urbs
****************************************************************/
static void kaweth_kill_urbs(struct kaweth_device *kaweth)
{
kaweth->status &= ~KAWETH_STATUS_CLOSING;
+ usb_autopm_enable(kaweth->intf);
+
return 0;
}
static void kaweth_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
{
+ struct kaweth_device *kaweth = netdev_priv(dev);
strlcpy(info->driver, driver_name, sizeof(info->driver));
+ usb_make_path(kaweth->dev, info->bus_info, sizeof (info->bus_info));
+}
+
+static u32 kaweth_get_link(struct net_device *dev)
+{
+ struct kaweth_device *kaweth = netdev_priv(dev);
+
+ return kaweth->linkstate;
}
static struct ethtool_ops ops = {
- .get_drvinfo = kaweth_get_drvinfo
+ .get_drvinfo = kaweth_get_drvinfo,
+ .get_link = kaweth_get_link
};
/****************************************************************
struct kaweth_device *kaweth = usb_get_intfdata(intf);
unsigned long flags;
+ dbg("Suspending device");
spin_lock_irqsave(&kaweth->device_lock, flags);
kaweth->status |= KAWETH_STATUS_SUSPENDING;
spin_unlock_irqrestore(&kaweth->device_lock, flags);
struct kaweth_device *kaweth = usb_get_intfdata(intf);
unsigned long flags;
+ dbg("Resuming device");
spin_lock_irqsave(&kaweth->device_lock, flags);
kaweth->status &= ~KAWETH_STATUS_SUSPENDING;
spin_unlock_irqrestore(&kaweth->device_lock, flags);
dbg("Initializing net device.");
+ kaweth->intf = intf;
+
kaweth->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!kaweth->tx_urb)
goto err_free_netdev;
{
struct urb *urb;
int retv;
- int length;
+ int length = 0; /* shut up GCC */
urb = usb_alloc_urb(0, GFP_NOIO);
if (!urb)
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Billionton USBE-100", VENDOR_BILLIONTON, 0x8511,
DEFAULT_GPIO_RESET | PEGASUS_II )
-PEGASUS_DEV( "Corega FEter USB-TX", VENDOR_COREGA, 0x0004,
+PEGASUS_DEV( "Corega FEther USB-TX", VENDOR_COREGA, 0x0004,
DEFAULT_GPIO_RESET )
-PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d,
+PEGASUS_DEV( "Corega FEther USB-TXS", VENDOR_COREGA, 0x000d,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
DEFAULT_GPIO_RESET )
* - In some cases, MS-Windows will emit undocumented requests; this
* matters more to peripheral implementations than host ones.
*
+ * Moreover there's a no-open-specs variant of RNDIS called "ActiveSync".
+ *
* For these reasons and others, ** USE OF RNDIS IS STRONGLY DISCOURAGED ** in
* favor of such non-proprietary alternatives as CDC Ethernet or the newer (and
* currently rare) "Ethernet Emulation Model" (EEM).
* - control-in: GET_ENCAPSULATED
*
* We'll try to ignore the RESPONSE_AVAILABLE notifications.
+ *
+ * REVISIT some RNDIS implementations seem to have curious issues still
+ * to be resolved.
*/
struct rndis_msg_hdr {
__le32 msg_type; /* RNDIS_MSG_* */
// ... and more
} __attribute__ ((packed));
-/* RNDIS defines this (absurdly huge) control timeout */
-#define RNDIS_CONTROL_TIMEOUT_MS (10 * 1000)
+/* MS-Windows uses this strange size, but RNDIS spec says 1024 minimum */
+#define CONTROL_BUFFER_SIZE 1025
+
+/* RNDIS defines an (absurdly huge) 10 second control timeout,
+ * but ActiveSync seems to use a more usual 5 second timeout
+ * (which matches the USB 2.0 spec).
+ */
+#define RNDIS_CONTROL_TIMEOUT_MS (5 * 1000)
#define ccpu2 __constant_cpu_to_le32
static int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf)
{
struct cdc_state *info = (void *) &dev->data;
+ int master_ifnum;
int retval;
unsigned count;
__le32 rsp;
* disconnect(): either serialize, or dispatch responses on xid
*/
- /* Issue the request; don't bother byteswapping our xid */
+ /* Issue the request; xid is unique, don't bother byteswapping it */
if (likely(buf->msg_type != RNDIS_MSG_HALT
&& buf->msg_type != RNDIS_MSG_RESET)) {
xid = dev->xid++;
xid = dev->xid++;
buf->request_id = (__force __le32) xid;
}
+ master_ifnum = info->control->cur_altsetting->desc.bInterfaceNumber;
retval = usb_control_msg(dev->udev,
usb_sndctrlpipe(dev->udev, 0),
USB_CDC_SEND_ENCAPSULATED_COMMAND,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, info->u->bMasterInterface0,
+ 0, master_ifnum,
buf, le32_to_cpu(buf->msg_len),
RNDIS_CONTROL_TIMEOUT_MS);
if (unlikely(retval < 0 || xid == 0))
*/
rsp = buf->msg_type | RNDIS_MSG_COMPLETION;
for (count = 0; count < 10; count++) {
- memset(buf, 0, 1024);
+ memset(buf, 0, CONTROL_BUFFER_SIZE);
retval = usb_control_msg(dev->udev,
usb_rcvctrlpipe(dev->udev, 0),
USB_CDC_GET_ENCAPSULATED_RESPONSE,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, info->u->bMasterInterface0,
- buf, 1024,
+ 0, master_ifnum,
+ buf, CONTROL_BUFFER_SIZE,
RNDIS_CONTROL_TIMEOUT_MS);
if (likely(retval >= 8)) {
msg_len = le32_to_cpu(buf->msg_len);
usb_sndctrlpipe(dev->udev, 0),
USB_CDC_SEND_ENCAPSULATED_COMMAND,
USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- 0, info->u->bMasterInterface0,
+ 0, master_ifnum,
msg, sizeof *msg,
RNDIS_CONTROL_TIMEOUT_MS);
if (unlikely(retval < 0))
u32 tmp;
/* we can't rely on i/o from stack working, or stack allocation */
- u.buf = kmalloc(1024, GFP_KERNEL);
+ u.buf = kmalloc(CONTROL_BUFFER_SIZE, GFP_KERNEL);
if (!u.buf)
return -ENOMEM;
retval = usbnet_generic_cdc_bind(dev, intf);
if (retval < 0)
goto fail;
- net->hard_header_len += sizeof (struct rndis_data_hdr);
-
- /* initialize; max transfer is 16KB at full speed */
u.init->msg_type = RNDIS_MSG_INIT;
u.init->msg_len = ccpu2(sizeof *u.init);
u.init->major_version = ccpu2(1);
u.init->minor_version = ccpu2(0);
- u.init->max_transfer_size = ccpu2(net->mtu + net->hard_header_len);
+ /* max transfer (in spec) is 0x4000 at full speed, but for
+ * TX we'll stick to one Ethernet packet plus RNDIS framing.
+ * For RX we handle drivers that zero-pad to end-of-packet.
+ * Don't let userspace change these settings.
+ */
+ net->hard_header_len += sizeof (struct rndis_data_hdr);
+ dev->hard_mtu = net->mtu + net->hard_header_len;
+
+ dev->rx_urb_size = dev->hard_mtu + (dev->maxpacket + 1);
+ dev->rx_urb_size &= ~(dev->maxpacket - 1);
+ u.init->max_transfer_size = cpu_to_le32(dev->rx_urb_size);
+
+ net->change_mtu = NULL;
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
/* it might not even be an RNDIS device!! */
dev_err(&intf->dev, "RNDIS init failed, %d\n", retval);
+ goto fail_and_release;
+ }
+ tmp = le32_to_cpu(u.init_c->max_transfer_size);
+ if (tmp < dev->hard_mtu) {
+ dev_err(&intf->dev,
+ "dev can't take %u byte packets (max %u)\n",
+ dev->hard_mtu, tmp);
goto fail_and_release;
}
- dev->hard_mtu = le32_to_cpu(u.init_c->max_transfer_size);
+
/* REVISIT: peripheral "alignment" request is ignored ... */
- dev_dbg(&intf->dev, "hard mtu %u, align %d\n", dev->hard_mtu,
+ dev_dbg(&intf->dev,
+ "hard mtu %u (%u from dev), rx buflen %Zu, align %d\n",
+ dev->hard_mtu, tmp, dev->rx_urb_size,
1 << le32_to_cpu(u.init_c->packet_alignment));
- /* get designated host ethernet address */
- memset(u.get, 0, sizeof *u.get);
+ /* Get designated host ethernet address.
+ *
+ * Adding a payload exactly the same size as the expected response
+ * payload is an evident requirement MSFT added for ActiveSync.
+ * This undocumented (and nonsensical) issue was found by sniffing
+ * protocol requests from the ActiveSync 4.1 Windows driver.
+ */
+ memset(u.get, 0, sizeof *u.get + 48);
u.get->msg_type = RNDIS_MSG_QUERY;
- u.get->msg_len = ccpu2(sizeof *u.get);
+ u.get->msg_len = ccpu2(sizeof *u.get + 48);
u.get->oid = OID_802_3_PERMANENT_ADDRESS;
+ u.get->len = ccpu2(48);
+ u.get->offset = ccpu2(20);
retval = rndis_command(dev, u.header);
if (unlikely(retval < 0)) {
goto fail_and_release;
}
tmp = le32_to_cpu(u.get_c->offset);
- if (unlikely((tmp + 8) > (1024 - ETH_ALEN)
+ if (unlikely((tmp + 8) > (CONTROL_BUFFER_SIZE - ETH_ALEN)
|| u.get_c->len != ccpu2(ETH_ALEN))) {
dev_err(&intf->dev, "rndis ethaddr off %d len %d ?\n",
tmp, le32_to_cpu(u.get_c->len));
/* RNDIS is MSFT's un-official variant of CDC ACM */
USB_INTERFACE_INFO(USB_CLASS_COMM, 2 /* ACM */, 0x0ff),
.driver_info = (unsigned long) &rndis_info,
+}, {
+ /* "ActiveSync" is an undocumented variant of RNDIS, used in WM5 */
+ USB_INTERFACE_INFO(USB_CLASS_MISC, 1, 1),
+ .driver_info = (unsigned long) &rndis_info,
},
{ }, // END
};
schedule_work(&priv->rx_work);
}
+static struct usb_driver aircable_driver = {
+ .name = "aircable",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver aircable_device = {
- .description = "aircable",
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "aircable",
+ },
+ .usb_driver = &aircable_driver,
.id_table = id_table,
.num_ports = 1,
.attach = aircable_attach,
.unthrottle = aircable_unthrottle,
};
-static struct usb_driver aircable_driver = {
- .name = "aircable",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table,
-};
-
static int __init aircable_init (void)
{
int retval;
.owner = THIS_MODULE,
.name = "airprime",
},
+ .usb_driver = &airprime_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.probe = usb_serial_probe,
.disconnect = usb_serial_disconnect,
.id_table = id_table,
+ .no_dynamic_id = 1,
};
static struct usb_serial_driver ark3116_device = {
.name = "ark3116",
},
.id_table = id_table,
+ .usb_driver = &ark3116_driver,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.num_bulk_out = 1,
.name = "belkin",
},
.description = "Belkin / Peracom / GoHubs USB Serial Adapter",
+ .usb_driver = &belkin_driver,
.id_table = id_table_combined,
.num_interrupt_in = 1,
.num_bulk_in = 1,
return retval;
}
+#ifdef CONFIG_HOTPLUG
+static ssize_t store_new_id(struct device_driver *driver,
+ const char *buf, size_t count)
+{
+ struct usb_serial_driver *usb_drv = to_usb_serial_driver(driver);
+ ssize_t retval = usb_store_new_id(&usb_drv->dynids, driver, buf, count);
+
+ if (retval >= 0 && usb_drv->usb_driver != NULL)
+ retval = usb_store_new_id(&usb_drv->usb_driver->dynids,
+ &usb_drv->usb_driver->drvwrap.driver,
+ buf, count);
+ return retval;
+}
+
+static struct driver_attribute drv_attrs[] = {
+ __ATTR(new_id, S_IWUSR, NULL, store_new_id),
+ __ATTR_NULL,
+};
+
+static void free_dynids(struct usb_serial_driver *drv)
+{
+ struct usb_dynid *dynid, *n;
+
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry_safe(dynid, n, &drv->dynids.list, node) {
+ list_del(&dynid->node);
+ kfree(dynid);
+ }
+ spin_unlock(&drv->dynids.lock);
+}
+
+#else
+static struct driver_attribute drv_attrs[] = {
+ __ATTR_NULL,
+};
+static inline void free_dynids(struct usb_driver *drv)
+{
+}
+#endif
+
struct bus_type usb_serial_bus_type = {
.name = "usb-serial",
.match = usb_serial_device_match,
.probe = usb_serial_device_probe,
.remove = usb_serial_device_remove,
+ .drv_attrs = drv_attrs,
};
int usb_serial_bus_register(struct usb_serial_driver *driver)
int retval;
driver->driver.bus = &usb_serial_bus_type;
+ spin_lock_init(&driver->dynids.lock);
+ INIT_LIST_HEAD(&driver->dynids.list);
+
retval = driver_register(&driver->driver);
return retval;
void usb_serial_bus_deregister(struct usb_serial_driver *driver)
{
+ free_dynids(driver);
driver_unregister(&driver->driver);
}
.owner = THIS_MODULE,
.name = "cp2101",
},
+ .usb_driver = &cp2101_driver,
.id_table = id_table,
.num_interrupt_in = 0,
.num_bulk_in = 0,
.name = "cyberjack",
},
.description = "Reiner SCT Cyberjack USB card reader",
+ .usb_driver = &cyberjack_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.open = cyberjack_open,
.close = cyberjack_close,
.write = cyberjack_write,
- .write_room = cyberjack_write_room,
+ .write_room = cyberjack_write_room,
.read_int_callback = cyberjack_read_int_callback,
.read_bulk_callback = cyberjack_read_bulk_callback,
.write_bulk_callback = cyberjack_write_bulk_callback,
.name = "earthmate",
},
.description = "DeLorme Earthmate USB",
+ .usb_driver = &cypress_driver,
.id_table = id_table_earthmate,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "cyphidcom",
},
.description = "HID->COM RS232 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_cyphidcomrs232,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "nokiaca42v2",
},
.description = "Nokia CA-42 V2 Adapter",
+ .usb_driver = &cypress_driver,
.id_table = id_table_nokiaca42v2,
.num_interrupt_in = 1,
.num_interrupt_out = 1,
.name = "digi_2",
},
.description = "Digi 2 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_2,
.num_interrupt_in = 0,
.num_bulk_in = 4,
.name = "digi_4",
},
.description = "Digi 4 port USB adapter",
+ .usb_driver = &digi_driver,
.id_table = id_table_4,
.num_interrupt_in = 0,
.num_bulk_in = 5,
.name = "empeg",
},
.id_table = id_table,
+ .usb_driver = &empeg_driver,
.num_interrupt_in = 0,
.num_bulk_in = 1,
.num_bulk_out = 1,
{ USB_DEVICE(BANDB_VID, BANDB_USTL4_PID) },
{ USB_DEVICE(BANDB_VID, BANDB_USO9ML2_PID) },
{ USB_DEVICE(FTDI_VID, EVER_ECO_PRO_CDS) },
- { USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_0_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_1_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_4N_GALAXY_DE_2_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_0_PID) },
.name = "ftdi_sio",
},
.description = "FTDI USB Serial Device",
+ .usb_driver = &ftdi_driver ,
.id_table = id_table_combined,
.num_interrupt_in = 0,
.num_bulk_in = 1,
* USB-TTY activ, USB-TTY passiv. Some PIDs are used by several devices
* and I'm not entirely sure which are used by which.
*/
-#define FTDI_4N_GALAXY_DE_0_PID 0x8372
#define FTDI_4N_GALAXY_DE_1_PID 0xF3C0
#define FTDI_4N_GALAXY_DE_2_PID 0xF3C1
.name = "funsoft",
},
.id_table = id_table,
+ .usb_driver = &funsoft_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.name = "garmin_gps",
},
.description = "Garmin GPS usb/tty",
+ .usb_driver = &garmin_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
#include <linux/usb/serial.h>
#include <asm/uaccess.h>
+static int generic_probe(struct usb_interface *interface,
+ const struct usb_device_id *id);
+
+
static int debug;
#ifdef CONFIG_USB_SERIAL_GENERIC
static struct usb_device_id generic_device_ids[2]; /* Initially all zeroes. */
+/* we want to look at all devices, as the vendor/product id can change
+ * depending on the command line argument */
+static struct usb_device_id generic_serial_ids[] = {
+ {.driver_info = 42},
+ {}
+};
+
+static struct usb_driver generic_driver = {
+ .name = "usbserial_generic",
+ .probe = generic_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = generic_serial_ids,
+ .no_dynamic_id = 1,
+};
+
/* All of the device info needed for the Generic Serial Converter */
struct usb_serial_driver usb_serial_generic_device = {
.driver = {
.name = "generic",
},
.id_table = generic_device_ids,
+ .usb_driver = &generic_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.shutdown = usb_serial_generic_shutdown,
};
-/* we want to look at all devices, as the vendor/product id can change
- * depending on the command line argument */
-static struct usb_device_id generic_serial_ids[] = {
- {.driver_info = 42},
- {}
-};
-
static int generic_probe(struct usb_interface *interface,
const struct usb_device_id *id)
{
return usb_serial_probe(interface, id);
return -ENODEV;
}
-
-static struct usb_driver generic_driver = {
- .name = "usbserial_generic",
- .probe = generic_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = generic_serial_ids,
- .no_dynamic_id = 1,
-};
#endif
int usb_serial_generic_register (int _debug)
.name = "hp4X",
},
.id_table = id_table,
+ .usb_driver = &hp49gp_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
struct edge_manuf_descriptor manuf_descriptor; /* the manufacturer descriptor */
struct edge_boot_descriptor boot_descriptor; /* the boot firmware descriptor */
struct edgeport_product_info product_info; /* Product Info */
+ struct edge_compatibility_descriptor epic_descriptor; /* Edgeport compatible descriptor */
+ int is_epic; /* flag if EPiC device or not */
__u8 interrupt_in_endpoint; /* the interrupt endpoint handle */
unsigned char * interrupt_in_buffer; /* the buffer we use for the interrupt endpoint */
#include "io_tables.h" /* all of the devices that this driver supports */
-static struct usb_driver io_driver = {
- .name = "io_edgeport",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = id_table_combined,
- .no_dynamic_id = 1,
-};
-
/* function prototypes for all of our local functions */
static void process_rcvd_data (struct edgeport_serial *edge_serial, unsigned char *buffer, __u16 bufferLength);
static void process_rcvd_status (struct edgeport_serial *edge_serial, __u8 byte2, __u8 byte3);
unicode_to_ascii(string, buflen, pStringDesc->wData, pStringDesc->bLength/2);
kfree(pStringDesc);
+ dbg("%s - USB String %s", __FUNCTION__, string);
return strlen(string);
}
}
#endif
+static void dump_product_info(struct edgeport_product_info *product_info)
+{
+ // Dump Product Info structure
+ dbg("**Product Information:");
+ dbg(" ProductId %x", product_info->ProductId );
+ dbg(" NumPorts %d", product_info->NumPorts );
+ dbg(" ProdInfoVer %d", product_info->ProdInfoVer );
+ dbg(" IsServer %d", product_info->IsServer);
+ dbg(" IsRS232 %d", product_info->IsRS232 );
+ dbg(" IsRS422 %d", product_info->IsRS422 );
+ dbg(" IsRS485 %d", product_info->IsRS485 );
+ dbg(" RomSize %d", product_info->RomSize );
+ dbg(" RamSize %d", product_info->RamSize );
+ dbg(" CpuRev %x", product_info->CpuRev );
+ dbg(" BoardRev %x", product_info->BoardRev);
+ dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion,
+ product_info->BootMinorVersion,
+ le16_to_cpu(product_info->BootBuildNumber));
+ dbg(" FirmwareMajorVersion %d.%d.%d", product_info->FirmwareMajorVersion,
+ product_info->FirmwareMinorVersion,
+ le16_to_cpu(product_info->FirmwareBuildNumber));
+ dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0],
+ product_info->ManufactureDescDate[1],
+ product_info->ManufactureDescDate[2]+1900);
+ dbg(" iDownloadFile 0x%x", product_info->iDownloadFile);
+ dbg(" EpicVer %d", product_info->EpicVer);
+}
+
static void get_product_info(struct edgeport_serial *edge_serial)
{
struct edgeport_product_info *product_info = &edge_serial->product_info;
break;
}
- // Dump Product Info structure
- dbg("**Product Information:");
- dbg(" ProductId %x", product_info->ProductId );
- dbg(" NumPorts %d", product_info->NumPorts );
- dbg(" ProdInfoVer %d", product_info->ProdInfoVer );
- dbg(" IsServer %d", product_info->IsServer);
- dbg(" IsRS232 %d", product_info->IsRS232 );
- dbg(" IsRS422 %d", product_info->IsRS422 );
- dbg(" IsRS485 %d", product_info->IsRS485 );
- dbg(" RomSize %d", product_info->RomSize );
- dbg(" RamSize %d", product_info->RamSize );
- dbg(" CpuRev %x", product_info->CpuRev );
- dbg(" BoardRev %x", product_info->BoardRev);
- dbg(" BootMajorVersion %d.%d.%d", product_info->BootMajorVersion,
- product_info->BootMinorVersion,
- le16_to_cpu(product_info->BootBuildNumber));
- dbg(" FirmwareMajorVersion %d.%d.%d", product_info->FirmwareMajorVersion,
- product_info->FirmwareMinorVersion,
- le16_to_cpu(product_info->FirmwareBuildNumber));
- dbg(" ManufactureDescDate %d/%d/%d", product_info->ManufactureDescDate[0],
- product_info->ManufactureDescDate[1],
- product_info->ManufactureDescDate[2]+1900);
- dbg(" iDownloadFile 0x%x", product_info->iDownloadFile);
+ dump_product_info(product_info);
+}
+static int get_epic_descriptor(struct edgeport_serial *ep)
+{
+ int result;
+ struct usb_serial *serial = ep->serial;
+ struct edgeport_product_info *product_info = &ep->product_info;
+ struct edge_compatibility_descriptor *epic = &ep->epic_descriptor;
+ struct edge_compatibility_bits *bits;
+
+ ep->is_epic = 0;
+ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ USB_REQUEST_ION_GET_EPIC_DESC,
+ 0xC0, 0x00, 0x00,
+ &ep->epic_descriptor,
+ sizeof(struct edge_compatibility_descriptor),
+ 300);
+
+ dbg("%s result = %d", __FUNCTION__, result);
+
+ if (result > 0) {
+ ep->is_epic = 1;
+ memset(product_info, 0, sizeof(struct edgeport_product_info));
+
+ product_info->NumPorts = epic->NumPorts;
+ product_info->ProdInfoVer = 0;
+ product_info->FirmwareMajorVersion = epic->MajorVersion;
+ product_info->FirmwareMinorVersion = epic->MinorVersion;
+ product_info->FirmwareBuildNumber = epic->BuildNumber;
+ product_info->iDownloadFile = epic->iDownloadFile;
+ product_info->EpicVer = epic->EpicVer;
+ product_info->Epic = epic->Supports;
+ product_info->ProductId = ION_DEVICE_ID_EDGEPORT_COMPATIBLE;
+ dump_product_info(product_info);
+
+ bits = &ep->epic_descriptor.Supports;
+ dbg("**EPIC descriptor:");
+ dbg(" VendEnableSuspend: %s", bits->VendEnableSuspend ? "TRUE": "FALSE");
+ dbg(" IOSPOpen : %s", bits->IOSPOpen ? "TRUE": "FALSE" );
+ dbg(" IOSPClose : %s", bits->IOSPClose ? "TRUE": "FALSE" );
+ dbg(" IOSPChase : %s", bits->IOSPChase ? "TRUE": "FALSE" );
+ dbg(" IOSPSetRxFlow : %s", bits->IOSPSetRxFlow ? "TRUE": "FALSE" );
+ dbg(" IOSPSetTxFlow : %s", bits->IOSPSetTxFlow ? "TRUE": "FALSE" );
+ dbg(" IOSPSetXChar : %s", bits->IOSPSetXChar ? "TRUE": "FALSE" );
+ dbg(" IOSPRxCheck : %s", bits->IOSPRxCheck ? "TRUE": "FALSE" );
+ dbg(" IOSPSetClrBreak : %s", bits->IOSPSetClrBreak ? "TRUE": "FALSE" );
+ dbg(" IOSPWriteMCR : %s", bits->IOSPWriteMCR ? "TRUE": "FALSE" );
+ dbg(" IOSPWriteLCR : %s", bits->IOSPWriteLCR ? "TRUE": "FALSE" );
+ dbg(" IOSPSetBaudRate : %s", bits->IOSPSetBaudRate ? "TRUE": "FALSE" );
+ dbg(" TrueEdgeport : %s", bits->TrueEdgeport ? "TRUE": "FALSE" );
+ }
+
+ return result;
}
edge_port->closePending = TRUE;
- /* flush and chase */
- edge_port->chaseResponsePending = TRUE;
-
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
- if (status == 0) {
- // block until chase finished
- block_until_chase_response(edge_port);
- } else {
- edge_port->chaseResponsePending = FALSE;
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ /* flush and chase */
+ edge_port->chaseResponsePending = TRUE;
+
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
+ status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
+ if (status == 0) {
+ // block until chase finished
+ block_until_chase_response(edge_port);
+ } else {
+ edge_port->chaseResponsePending = FALSE;
+ }
}
- /* close the port */
- dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__);
- send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPClose))) {
+ /* close the port */
+ dbg("%s - Sending IOSP_CMD_CLOSE_PORT", __FUNCTION__);
+ send_iosp_ext_cmd (edge_port, IOSP_CMD_CLOSE_PORT, 0);
+ }
//port->close = TRUE;
edge_port->closePending = FALSE;
static void edge_break (struct usb_serial_port *port, int break_state)
{
struct edgeport_port *edge_port = usb_get_serial_port_data(port);
+ struct edgeport_serial *edge_serial = usb_get_serial_data(port->serial);
int status;
- /* flush and chase */
- edge_port->chaseResponsePending = TRUE;
-
- dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
- if (status == 0) {
- // block until chase finished
- block_until_chase_response(edge_port);
- } else {
- edge_port->chaseResponsePending = FALSE;
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPChase))) {
+ /* flush and chase */
+ edge_port->chaseResponsePending = TRUE;
+
+ dbg("%s - Sending IOSP_CMD_CHASE_PORT", __FUNCTION__);
+ status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CHASE_PORT, 0);
+ if (status == 0) {
+ // block until chase finished
+ block_until_chase_response(edge_port);
+ } else {
+ edge_port->chaseResponsePending = FALSE;
+ }
}
- if (break_state == -1) {
- dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
- } else {
- dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__);
- status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
- }
- if (status) {
- dbg("%s - error sending break set/clear command.", __FUNCTION__);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPSetClrBreak))) {
+ if (break_state == -1) {
+ dbg("%s - Sending IOSP_CMD_SET_BREAK", __FUNCTION__);
+ status = send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_BREAK, 0);
+ } else {
+ dbg("%s - Sending IOSP_CMD_CLEAR_BREAK", __FUNCTION__);
+ status = send_iosp_ext_cmd (edge_port, IOSP_CMD_CLEAR_BREAK, 0);
+ }
+ if (status) {
+ dbg("%s - error sending break set/clear command.", __FUNCTION__);
+ }
}
return;
*****************************************************************************/
static int send_cmd_write_baud_rate (struct edgeport_port *edge_port, int baudRate)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
unsigned char *cmdBuffer;
unsigned char *currCmd;
int cmdLen = 0;
int status;
unsigned char number = edge_port->port->number - edge_port->port->serial->minor;
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (!edge_serial->epic_descriptor.Supports.IOSPSetBaudRate))) {
+ dbg("SendCmdWriteBaudRate - NOT Setting baud rate for port = %d, baud = %d",
+ edge_port->port->number, baudRate);
+ return 0;
+ }
+
dbg("%s - port = %d, baud = %d", __FUNCTION__, edge_port->port->number, baudRate);
status = calc_baud_rate_divisor (baudRate, &divisor);
*****************************************************************************/
static int send_cmd_write_uart_register (struct edgeport_port *edge_port, __u8 regNum, __u8 regValue)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
unsigned char *cmdBuffer;
unsigned char *currCmd;
unsigned long cmdLen = 0;
dbg("%s - write to %s register 0x%02x", (regNum == MCR) ? "MCR" : "LCR", __FUNCTION__, regValue);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (!edge_serial->epic_descriptor.Supports.IOSPWriteMCR) &&
+ (regNum == MCR))) {
+ dbg("SendCmdWriteUartReg - Not writting to MCR Register");
+ return 0;
+ }
+
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (!edge_serial->epic_descriptor.Supports.IOSPWriteLCR) &&
+ (regNum == LCR))) {
+ dbg ("SendCmdWriteUartReg - Not writting to LCR Register");
+ return 0;
+ }
+
// Alloc memory for the string of commands.
cmdBuffer = kmalloc (0x10, GFP_ATOMIC);
if (cmdBuffer == NULL ) {
#endif
static void change_port_settings (struct edgeport_port *edge_port, struct ktermios *old_termios)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(edge_port->port->serial);
struct tty_struct *tty;
int baud;
unsigned cflag;
unsigned char stop_char = STOP_CHAR(tty);
unsigned char start_char = START_CHAR(tty);
- send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_XON_CHAR, start_char);
- send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPSetXChar))) {
+ send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XON_CHAR, start_char);
+ send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_XOFF_CHAR, stop_char);
+ }
/* if we are implementing INBOUND XON/XOFF */
if (I_IXOFF(tty)) {
}
/* Set flow control to the configured value */
- send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
- send_iosp_ext_cmd (edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPSetRxFlow)))
+ send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_RX_FLOW, rxFlow);
+ if ((!edge_serial->is_epic) ||
+ ((edge_serial->is_epic) &&
+ (edge_serial->epic_descriptor.Supports.IOSPSetTxFlow)))
+ send_iosp_ext_cmd(edge_port, IOSP_CMD_SET_TX_FLOW, txFlow);
edge_port->shadowLCR &= ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
struct edgeport_port *edge_port;
struct usb_device *dev;
int i, j;
+ int response;
+ int interrupt_in_found;
+ int bulk_in_found;
+ int bulk_out_found;
+ static __u32 descriptor[3] = { EDGE_COMPATIBILITY_MASK0,
+ EDGE_COMPATIBILITY_MASK1,
+ EDGE_COMPATIBILITY_MASK2 };
dev = serial->dev;
dev_info(&serial->dev->dev, "%s detected\n", edge_serial->name);
- /* get the manufacturing descriptor for this device */
- get_manufacturing_desc (edge_serial);
+ /* Read the epic descriptor */
+ if (get_epic_descriptor(edge_serial) <= 0) {
+ /* memcpy descriptor to Supports structures */
+ memcpy(&edge_serial->epic_descriptor.Supports, descriptor,
+ sizeof(struct edge_compatibility_bits));
+
+ /* get the manufacturing descriptor for this device */
+ get_manufacturing_desc (edge_serial);
- /* get the boot descriptor */
- get_boot_desc (edge_serial);
+ /* get the boot descriptor */
+ get_boot_desc (edge_serial);
- get_product_info(edge_serial);
+ get_product_info(edge_serial);
+ }
/* set the number of ports from the manufacturing description */
/* serial->num_ports = serial->product_info.NumPorts; */
- if (edge_serial->product_info.NumPorts != serial->num_ports) {
- warn("%s - Device Reported %d serial ports vs core "
- "thinking we have %d ports, email greg@kroah.com this info.",
- __FUNCTION__, edge_serial->product_info.NumPorts,
- serial->num_ports);
+ if ((!edge_serial->is_epic) &&
+ (edge_serial->product_info.NumPorts != serial->num_ports)) {
+ dev_warn(&serial->dev->dev, "Device Reported %d serial ports "
+ "vs. core thinking we have %d ports, email "
+ "greg@kroah.com this information.",
+ edge_serial->product_info.NumPorts,
+ serial->num_ports);
}
dbg("%s - time 1 %ld", __FUNCTION__, jiffies);
- /* now load the application firmware into this device */
- load_application_firmware (edge_serial);
+ /* If not an EPiC device */
+ if (!edge_serial->is_epic) {
+ /* now load the application firmware into this device */
+ load_application_firmware (edge_serial);
- dbg("%s - time 2 %ld", __FUNCTION__, jiffies);
+ dbg("%s - time 2 %ld", __FUNCTION__, jiffies);
- /* Check current Edgeport EEPROM and update if necessary */
- update_edgeport_E2PROM (edge_serial);
-
- dbg("%s - time 3 %ld", __FUNCTION__, jiffies);
+ /* Check current Edgeport EEPROM and update if necessary */
+ update_edgeport_E2PROM (edge_serial);
- /* set the configuration to use #1 */
-// dbg("set_configuration 1");
-// usb_set_configuration (dev, 1);
+ dbg("%s - time 3 %ld", __FUNCTION__, jiffies);
+
+ /* set the configuration to use #1 */
+// dbg("set_configuration 1");
+// usb_set_configuration (dev, 1);
+ }
/* we set up the pointers to the endpoints in the edge_open function,
* as the structures aren't created yet. */
edge_port->port = serial->port[i];
usb_set_serial_port_data(serial->port[i], edge_port);
}
-
- return 0;
+
+ response = 0;
+
+ if (edge_serial->is_epic) {
+ /* EPIC thing, set up our interrupt polling now and our read urb, so
+ * that the device knows it really is connected. */
+ interrupt_in_found = bulk_in_found = bulk_out_found = FALSE;
+ for (i = 0; i < serial->interface->altsetting[0].desc.bNumEndpoints; ++i) {
+ struct usb_endpoint_descriptor *endpoint;
+ int buffer_size;
+
+ endpoint = &serial->interface->altsetting[0].endpoint[i].desc;
+ buffer_size = le16_to_cpu(endpoint->wMaxPacketSize);
+ if ((!interrupt_in_found) &&
+ (usb_endpoint_is_int_in(endpoint))) {
+ /* we found a interrupt in endpoint */
+ dbg("found interrupt in");
+
+ /* not set up yet, so do it now */
+ edge_serial->interrupt_read_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!edge_serial->interrupt_read_urb) {
+ err("out of memory");
+ return -ENOMEM;
+ }
+ edge_serial->interrupt_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!edge_serial->interrupt_in_buffer) {
+ err("out of memory");
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ return -ENOMEM;
+ }
+ edge_serial->interrupt_in_endpoint = endpoint->bEndpointAddress;
+
+ /* set up our interrupt urb */
+ usb_fill_int_urb(edge_serial->interrupt_read_urb,
+ dev,
+ usb_rcvintpipe(dev, endpoint->bEndpointAddress),
+ edge_serial->interrupt_in_buffer,
+ buffer_size,
+ edge_interrupt_callback,
+ edge_serial,
+ endpoint->bInterval);
+
+ interrupt_in_found = TRUE;
+ }
+
+ if ((!bulk_in_found) &&
+ (usb_endpoint_is_bulk_in(endpoint))) {
+ /* we found a bulk in endpoint */
+ dbg("found bulk in");
+
+ /* not set up yet, so do it now */
+ edge_serial->read_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!edge_serial->read_urb) {
+ err("out of memory");
+ return -ENOMEM;
+ }
+ edge_serial->bulk_in_buffer = kmalloc(buffer_size, GFP_KERNEL);
+ if (!edge_serial->bulk_in_buffer) {
+ err ("out of memory");
+ usb_free_urb(edge_serial->read_urb);
+ return -ENOMEM;
+ }
+ edge_serial->bulk_in_endpoint = endpoint->bEndpointAddress;
+
+ /* set up our bulk in urb */
+ usb_fill_bulk_urb(edge_serial->read_urb, dev,
+ usb_rcvbulkpipe(dev, endpoint->bEndpointAddress),
+ edge_serial->bulk_in_buffer,
+ endpoint->wMaxPacketSize,
+ edge_bulk_in_callback,
+ edge_serial);
+ bulk_in_found = TRUE;
+ }
+
+ if ((!bulk_out_found) &&
+ (usb_endpoint_is_bulk_out(endpoint))) {
+ /* we found a bulk out endpoint */
+ dbg("found bulk out");
+ edge_serial->bulk_out_endpoint = endpoint->bEndpointAddress;
+ bulk_out_found = TRUE;
+ }
+ }
+
+ if ((!interrupt_in_found) || (!bulk_in_found) || (!bulk_out_found)) {
+ err ("Error - the proper endpoints were not found!");
+ return -ENODEV;
+ }
+
+ /* start interrupt read for this edgeport this interrupt will
+ * continue as long as the edgeport is connected */
+ response = usb_submit_urb(edge_serial->interrupt_read_urb, GFP_KERNEL);
+ if (response)
+ err("%s - Error %d submitting control urb", __FUNCTION__, response);
+ }
+ return response;
}
****************************************************************************/
static void edge_shutdown (struct usb_serial *serial)
{
+ struct edgeport_serial *edge_serial = usb_get_serial_data(serial);
int i;
dbg("%s", __FUNCTION__);
kfree (usb_get_serial_port_data(serial->port[i]));
usb_set_serial_port_data(serial->port[i], NULL);
}
- kfree (usb_get_serial_data(serial));
+ /* free up our endpoint stuff */
+ if (edge_serial->is_epic) {
+ usb_unlink_urb(edge_serial->interrupt_read_urb);
+ usb_free_urb(edge_serial->interrupt_read_urb);
+ kfree(edge_serial->interrupt_in_buffer);
+
+ usb_unlink_urb(edge_serial->read_urb);
+ usb_free_urb(edge_serial->read_urb);
+ kfree(edge_serial->bulk_in_buffer);
+ }
+
+ kfree(edge_serial);
usb_set_serial_data(serial, NULL);
}
retval = usb_serial_register(&edgeport_8port_device);
if (retval)
goto failed_8port_device_register;
+ retval = usb_serial_register(&epic_device);
+ if (retval)
+ goto failed_epic_device_register;
retval = usb_register(&io_driver);
if (retval)
goto failed_usb_register;
return 0;
failed_usb_register:
+ usb_serial_deregister(&epic_device);
+failed_epic_device_register:
usb_serial_deregister(&edgeport_8port_device);
failed_8port_device_register:
usb_serial_deregister(&edgeport_4port_device);
usb_serial_deregister (&edgeport_2port_device);
usb_serial_deregister (&edgeport_4port_device);
usb_serial_deregister (&edgeport_8port_device);
+ usb_serial_deregister (&epic_device);
}
module_init(edgeport_init);
__le16 FirmwareBuildNumber; /* zzzz (LE format) */
__u8 ManufactureDescDate[3]; /* MM/DD/YY when descriptor template was compiled */
- __u8 Unused1[1]; /* Available */
+ __u8 HardwareType;
__u8 iDownloadFile; /* What to download to EPiC device */
- __u8 Unused2[2]; /* Available */
+ __u8 EpicVer; /* What version of EPiC spec this device supports */
+
+ struct edge_compatibility_bits Epic;
};
/*
{ }
};
+static struct usb_device_id Epic_port_id_table [] = {
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
+ { }
+};
+
/* Devices that this driver supports */
static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_4) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8R) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_8RR) },
{ USB_DEVICE(USB_VENDOR_ID_ION, ION_DEVICE_ID_EDGEPORT_412_8) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0202) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0203) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0310) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0311) },
+ { USB_DEVICE(USB_VENDOR_ID_NCR, NCR_DEVICE_ID_EPIC_0312) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A758) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A794) },
+ { USB_DEVICE(USB_VENDOR_ID_AXIOHM, AXIOHM_DEVICE_ID_EPIC_A225) },
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, id_table_combined);
+static struct usb_driver io_driver = {
+ .name = "io_edgeport",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver edgeport_2port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "edgeport_2",
},
.description = "Edgeport 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_4",
},
.description = "Edgeport 4 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_4port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_8",
},
.description = "Edgeport 8 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_8port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.write_bulk_callback = edge_bulk_out_data_callback,
};
+static struct usb_serial_driver epic_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "epic",
+ },
+ .description = "EPiC device",
+ .id_table = Epic_port_id_table,
+ .num_interrupt_in = 1,
+ .num_bulk_in = 1,
+ .num_bulk_out = 1,
+ .num_ports = 1,
+ .open = edge_open,
+ .close = edge_close,
+ .throttle = edge_throttle,
+ .unthrottle = edge_unthrottle,
+ .attach = edge_startup,
+ .shutdown = edge_shutdown,
+ .ioctl = edge_ioctl,
+ .set_termios = edge_set_termios,
+ .tiocmget = edge_tiocmget,
+ .tiocmset = edge_tiocmset,
+ .write = edge_write,
+ .write_room = edge_write_room,
+ .chars_in_buffer = edge_chars_in_buffer,
+ .break_ctl = edge_break,
+ .read_int_callback = edge_interrupt_callback,
+ .read_bulk_callback = edge_bulk_in_callback,
+ .write_bulk_callback = edge_bulk_out_data_callback,
+};
+
#endif
.name = "edgeport_ti_1",
},
.description = "Edgeport TI 1 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_1port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "edgeport_ti_2",
},
.description = "Edgeport TI 2 port adapter",
+ .usb_driver = &io_driver,
.id_table = edgeport_2port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
#define USB_VENDOR_ID_ION 0x1608 // Our VID
#define USB_VENDOR_ID_TI 0x0451 // TI VID
+#define USB_VENDOR_ID_AXIOHM 0x05D9 /* Axiohm VID */
//
// Definitions of USB product IDs (PID)
};
+#define EDGE_COMPATIBILITY_MASK0 0x0001
+#define EDGE_COMPATIBILITY_MASK1 0x3FFF
+#define EDGE_COMPATIBILITY_MASK2 0x0001
+
struct edge_compatibility_descriptor
{
__u8 Length; // Descriptor Length (per USB spec)
.name = "ipaq",
},
.description = "PocketPC PDA",
+ .usb_driver = &ipaq_driver,
.id_table = ipaq_id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.name = "ipw",
},
.description = "IPWireless converter",
+ .usb_driver = &usb_ipw_driver,
.id_table = usb_ipw_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.name = "ir-usb",
},
.description = "IR Dongle",
+ .usb_driver = &ir_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
}
/* Helper functions used by keyspan_setup_urbs */
+static struct usb_endpoint_descriptor const *find_ep(struct usb_serial const *serial,
+ int endpoint)
+{
+ struct usb_host_interface *iface_desc;
+ struct usb_endpoint_descriptor *ep;
+ int i;
+
+ iface_desc = serial->interface->cur_altsetting;
+ for (i = 0; i < iface_desc->desc.bNumEndpoints; ++i) {
+ ep = &iface_desc->endpoint[i].desc;
+ if (ep->bEndpointAddress == endpoint)
+ return ep;
+ }
+ dev_warn(&serial->interface->dev, "found no endpoint descriptor for "
+ "endpoint %x\n", endpoint);
+ return NULL;
+}
+
static struct urb *keyspan_setup_urb (struct usb_serial *serial, int endpoint,
int dir, void *ctx, char *buf, int len,
void (*callback)(struct urb *))
{
struct urb *urb;
+ struct usb_endpoint_descriptor const *ep_desc;
+ char const *ep_type_name;
if (endpoint == -1)
return NULL; /* endpoint not needed */
return NULL;
}
- /* Fill URB using supplied data. */
- usb_fill_bulk_urb(urb, serial->dev,
- usb_sndbulkpipe(serial->dev, endpoint) | dir,
- buf, len, callback, ctx);
+ ep_desc = find_ep(serial, endpoint);
+ if (!ep_desc) {
+ /* leak the urb, something's wrong and the callers don't care */
+ return urb;
+ }
+ if (usb_endpoint_xfer_int(ep_desc)) {
+ ep_type_name = "INT";
+ usb_fill_int_urb(urb, serial->dev,
+ usb_sndintpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx,
+ ep_desc->bInterval);
+ } else if (usb_endpoint_xfer_bulk(ep_desc)) {
+ ep_type_name = "BULK";
+ usb_fill_bulk_urb(urb, serial->dev,
+ usb_sndbulkpipe(serial->dev, endpoint) | dir,
+ buf, len, callback, ctx);
+ } else {
+ dev_warn(&serial->interface->dev,
+ "unsupported endpoint type %x\n",
+ ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK);
+ usb_free_urb(urb);
+ return NULL;
+ }
+ dbg("%s - using urb %p for %s endpoint %x",
+ __func__, urb, ep_type_name, endpoint);
return urb;
}
#define keyspan_usa28_product_id 0x010f
#define keyspan_usa28x_product_id 0x0110
#define keyspan_usa28xa_product_id 0x0115
-#define keyspan_usa28xb_product_id 0x0110
#define keyspan_usa49w_product_id 0x010a
#define keyspan_usa49wlc_product_id 0x012a
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49w_product_id)},
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa49wlc_product_id)},
{ } /* Terminating entry */
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28x_product_id) },
{ USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xa_product_id) },
- { USB_DEVICE(KEYSPAN_VENDOR_ID, keyspan_usa28xb_product_id) },
{ } /* Terminating entry */
};
.name = "keyspan_no_firm",
},
.description = "Keyspan - (without firmware)",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_pre_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_1",
},
.description = "Keyspan 1 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_1port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_2",
},
.description = "Keyspan 2 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_2port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_4",
},
.description = "Keyspan 4 port adapter",
+ .usb_driver = &keyspan_driver,
.id_table = keyspan_4port_ids,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 5,
.name = "keyspan_pda_pre",
},
.description = "Keyspan PDA - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "xircom_no_firm",
},
.description = "Xircom / Entregra PGS - (prerenumeration)",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_fake_xircom,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "keyspan_pda",
},
.description = "Keyspan PDA",
+ .usb_driver = &keyspan_pda_driver,
.id_table = id_table_std,
.num_interrupt_in = 1,
.num_bulk_in = 0,
.name = "kl5kusb105d",
},
.description = "KL5KUSB105D / PalmConnect",
+ .usb_driver = &kl5kusb105d_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "kobil",
},
.description = "KOBIL USB smart card terminal",
+ .usb_driver = &kobil_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 0,
.name = "mct_u232",
},
.description = "MCT U232",
+ .usb_driver = &mct_u232_driver,
.id_table = id_table_combined,
.num_interrupt_in = 2,
.num_bulk_in = 0,
usb_set_serial_data(serial, NULL);
}
+static struct usb_driver usb_driver = {
+ .name = "moschip7720",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_port_id_table,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7720_2port_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "moschip7720",
},
.description = "Moschip 2 port adapter",
+ .usb_driver = &usb_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1,
.num_bulk_in = 2,
.read_bulk_callback = mos7720_bulk_in_callback,
};
-static struct usb_driver usb_driver = {
- .name = "moschip7720",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_port_id_table,
-};
-
static int __init moschip7720_init(void)
{
int retval;
}
+static struct usb_driver io_driver = {
+ .name = "mos7840",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = moschip_id_table_combined,
+ .no_dynamic_id = 1,
+};
+
static struct usb_serial_driver moschip7840_4port_device = {
.driver = {
.owner = THIS_MODULE,
.name = "mos7840",
},
.description = DRIVER_DESC,
+ .usb_driver = &io_driver,
.id_table = moschip_port_id_table,
.num_interrupt_in = 1, //NUM_DONT_CARE,//1,
#ifdef check
.read_int_callback = mos7840_interrupt_callback,
};
-static struct usb_driver io_driver = {
- .name = "mos7840",
- .probe = usb_serial_probe,
- .disconnect = usb_serial_disconnect,
- .id_table = moschip_id_table_combined,
-};
-
/****************************************************************************
* moschip7840_init
* This is called by the module subsystem, or on startup to initialize us
.name = "navman",
},
.id_table = id_table,
+ .usb_driver = &navman_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
.name = "omninet",
},
.description = "ZyXEL - omni.net lcd plus usb",
+ .usb_driver = &omninet_driver,
.id_table = id_table,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "option1",
},
.description = "GSM modem (1-port)",
+ .usb_driver = &option_driver,
.id_table = option_ids1,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "pl2303",
},
.id_table = id_table,
+ .usb_driver = &pl2303_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
.name = "safe_serial",
},
.id_table = id_table,
+ .usb_driver = &safe_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.num_bulk_out = NUM_DONT_CARE,
Portions based on the option driver by Matthias Urlichs <smurf@smurf.noris.de>
Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
- History:
*/
-#define DRIVER_VERSION "v.1.0.5"
+#define DRIVER_VERSION "v.1.0.6"
#define DRIVER_AUTHOR "Kevin Lloyd <linux@sierrawireless.com>"
#define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
static struct usb_device_id id_table [] = {
+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
- { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
};
static struct usb_device_id id_table_3port [] = {
+ { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0018) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
{ USB_DEVICE(0x1199, 0x0020) }, /* Sierra Wireless MC5725 */
- { USB_DEVICE(0x1199, 0x0017) }, /* Sierra Wireless EM5625 */
{ USB_DEVICE(0x1199, 0x0019) }, /* Sierra Wireless AirCard 595 */
- { USB_DEVICE(0x1199, 0x0218) }, /* Sierra Wireless MC5720 */
+ { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */
{ USB_DEVICE(0x1199, 0x6802) }, /* Sierra Wireless MC8755 */
+ { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 */
{ USB_DEVICE(0x1199, 0x6803) }, /* Sierra Wireless MC8765 */
- { USB_DEVICE(0x1199, 0x6804) }, /* Sierra Wireless MC8755 for Europe */
{ USB_DEVICE(0x1199, 0x6812) }, /* Sierra Wireless MC8775 */
{ USB_DEVICE(0x1199, 0x6820) }, /* Sierra Wireless AirCard 875 */
{ }
/* per port private data */
#define N_IN_URB 4
-#define N_OUT_URB 1
+#define N_OUT_URB 4
#define IN_BUFLEN 4096
#define OUT_BUFLEN 128
struct usb_serial *serial = port->serial;
int i, err;
struct urb *urb;
+ int result;
+ __u16 set_mode_dzero = 0x0000;
portdata = usb_get_serial_port_data(port);
port->tty->low_latency = 1;
+ /* set mode to D0 */
+ result = usb_control_msg(serial->dev,
+ usb_rcvctrlpipe(serial->dev, 0),
+ 0x00, 0x40, set_mode_dzero, 0, NULL,
+ 0, USB_CTRL_SET_TIMEOUT);
+
sierra_send_setup(port);
return (0);
},
.description = "Sierra USB modem (1 port)",
.id_table = id_table_1port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 1,
.num_bulk_out = 1,
},
.description = "Sierra USB modem (3 port)",
.id_table = id_table_3port,
+ .usb_driver = &sierra_driver,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 3,
.num_bulk_out = 3,
.name = "ti_usb_3410_5052_1",
},
.description = "TI USB 3410 1 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_3410,
.num_interrupt_in = 1,
.num_bulk_in = 1,
.name = "ti_usb_3410_5052_2",
},
.description = "TI USB 5052 2 port adapter",
+ .usb_driver = &ti_usb_driver,
.id_table = ti_id_table_5052,
.num_interrupt_in = 1,
.num_bulk_in = 2,
static int debug;
static struct usb_serial *serial_table[SERIAL_TTY_MINORS]; /* initially all NULL */
+static spinlock_t table_lock;
static LIST_HEAD(usb_serial_driver_list);
struct usb_serial *usb_serial_get_by_index(unsigned index)
{
- struct usb_serial *serial = serial_table[index];
+ struct usb_serial *serial;
+
+ spin_lock(&table_lock);
+ serial = serial_table[index];
if (serial)
kref_get(&serial->kref);
+ spin_unlock(&table_lock);
return serial;
}
dbg("%s %d", __FUNCTION__, num_ports);
*minor = 0;
+ spin_lock(&table_lock);
for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
if (serial_table[i])
continue;
dbg("%s - minor base = %d", __FUNCTION__, *minor);
for (i = *minor; (i < (*minor + num_ports)) && (i < SERIAL_TTY_MINORS); ++i)
serial_table[i] = serial;
+ spin_unlock(&table_lock);
return serial;
}
+ spin_unlock(&table_lock);
return NULL;
}
if (serial == NULL)
return;
+ spin_lock(&table_lock);
for (i = 0; i < serial->num_ports; ++i) {
serial_table[serial->minor + i] = NULL;
}
+ spin_unlock(&table_lock);
}
static void destroy_serial(struct kref *kref)
static int serial_write (struct tty_struct * tty, const unsigned char *buf, int count)
{
struct usb_serial_port *port = tty->driver_data;
- int retval = -EINVAL;
+ int retval = -ENODEV;
if (!port || port->serial->dev->state == USB_STATE_NOTATTACHED)
goto exit;
dbg("%s - port %d, %d byte(s)", __FUNCTION__, port->number, count);
if (!port->open_count) {
+ retval = -EINVAL;
dbg("%s - port not opened", __FUNCTION__);
goto exit;
}
port_free(port);
}
-static void port_free(struct usb_serial_port *port)
+static void kill_traffic(struct usb_serial_port *port)
{
usb_kill_urb(port->read_urb);
- usb_free_urb(port->read_urb);
usb_kill_urb(port->write_urb);
- usb_free_urb(port->write_urb);
usb_kill_urb(port->interrupt_in_urb);
- usb_free_urb(port->interrupt_in_urb);
usb_kill_urb(port->interrupt_out_urb);
+}
+
+static void port_free(struct usb_serial_port *port)
+{
+ kill_traffic(port);
+ usb_free_urb(port->read_urb);
+ usb_free_urb(port->write_urb);
+ usb_free_urb(port->interrupt_in_urb);
usb_free_urb(port->interrupt_out_urb);
kfree(port->bulk_in_buffer);
kfree(port->bulk_out_buffer);
return serial;
}
+static const struct usb_device_id *match_dynamic_id(struct usb_interface *intf,
+ struct usb_serial_driver *drv)
+{
+ struct usb_dynid *dynid;
+
+ spin_lock(&drv->dynids.lock);
+ list_for_each_entry(dynid, &drv->dynids.list, node) {
+ if (usb_match_one_id(intf, &dynid->id)) {
+ spin_unlock(&drv->dynids.lock);
+ return &dynid->id;
+ }
+ }
+ spin_unlock(&drv->dynids.lock);
+ return NULL;
+}
+
+static const struct usb_device_id *get_iface_id(struct usb_serial_driver *drv,
+ struct usb_interface *intf)
+{
+ const struct usb_device_id *id;
+
+ id = usb_match_id(intf, drv->id_table);
+ if (id) {
+ dbg("static descriptor matches");
+ goto exit;
+ }
+ id = match_dynamic_id(intf, drv);
+ if (id)
+ dbg("dynamic descriptor matches");
+exit:
+ return id;
+}
+
static struct usb_serial_driver *search_serial_device(struct usb_interface *iface)
{
struct list_head *p;
/* Check if the usb id matches a known device */
list_for_each(p, &usb_serial_driver_list) {
t = list_entry(p, struct usb_serial_driver, driver_list);
- id = usb_match_id(iface, t->id_table);
- if (id != NULL) {
- dbg("descriptor matches");
+ id = get_iface_id(t, iface);
+ if (id)
return t;
- }
}
return NULL;
int num_ports = 0;
int max_endpoints;
+ lock_kernel(); /* guard against unloading a serial driver module */
type = search_serial_device(interface);
if (!type) {
+ unlock_kernel();
dbg("none matched");
return -ENODEV;
}
serial = create_serial (dev, interface, type);
if (!serial) {
+ unlock_kernel();
dev_err(&interface->dev, "%s - out of memory\n", __FUNCTION__);
return -ENOMEM;
}
const struct usb_device_id *id;
if (!try_module_get(type->driver.owner)) {
+ unlock_kernel();
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
}
- id = usb_match_id(interface, type->id_table);
+ id = get_iface_id(type, interface);
retval = type->probe(serial, id);
module_put(type->driver.owner);
if (retval) {
+ unlock_kernel();
dbg ("sub driver rejected device");
kfree (serial);
return retval;
* properly during a later invocation of usb_serial_probe
*/
if (num_bulk_in == 0 || num_bulk_out == 0) {
+ unlock_kernel();
dev_info(&interface->dev, "PL-2303 hack: descriptors matched but endpoints did not\n");
kfree (serial);
return -ENODEV;
if (type == &usb_serial_generic_device) {
num_ports = num_bulk_out;
if (num_ports == 0) {
+ unlock_kernel();
dev_err(&interface->dev, "Generic device with no bulk out, not allowed.\n");
kfree (serial);
return -EIO;
/* if this device type has a calc_num_ports function, call it */
if (type->calc_num_ports) {
if (!try_module_get(type->driver.owner)) {
+ unlock_kernel();
dev_err(&interface->dev, "module get failed, exiting\n");
kfree (serial);
return -EIO;
num_ports = type->num_ports;
}
- if (get_free_serial (serial, num_ports, &minor) == NULL) {
- dev_err(&interface->dev, "No more free serial devices\n");
- kfree (serial);
- return -ENOMEM;
- }
-
serial->minor = minor;
serial->num_ports = num_ports;
serial->num_bulk_in = num_bulk_in;
max_endpoints = max(max_endpoints, num_interrupt_out);
max_endpoints = max(max_endpoints, (int)serial->num_ports);
serial->num_port_pointers = max_endpoints;
+ unlock_kernel();
+
dbg("%s - setting up %d port structures for this device", __FUNCTION__, max_endpoints);
for (i = 0; i < max_endpoints; ++i) {
port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
}
}
+ if (get_free_serial (serial, num_ports, &minor) == NULL) {
+ dev_err(&interface->dev, "No more free serial devices\n");
+ goto probe_error;
+ }
+
/* register all of the individual ports with the driver core */
for (i = 0; i < num_ports; ++i) {
port = serial->port[i];
if (serial) {
for (i = 0; i < serial->num_ports; ++i) {
port = serial->port[i];
- if (port && port->tty)
- tty_hangup(port->tty);
+ if (port) {
+ if (port->tty)
+ tty_hangup(port->tty);
+ kill_traffic(port);
+ }
}
/* let the last holder of this object
* cause it to be cleaned up */
return -ENOMEM;
/* Initialize our global data */
+ spin_lock_init(&table_lock);
for (i = 0; i < SERIAL_TTY_MINORS; ++i) {
serial_table[i] = NULL;
}
set_to_generic_if_null(device, shutdown);
}
-int usb_serial_register(struct usb_serial_driver *driver)
+int usb_serial_register(struct usb_serial_driver *driver) /* must be called with BKL held */
{
int retval;
}
-void usb_serial_deregister(struct usb_serial_driver *device)
+void usb_serial_deregister(struct usb_serial_driver *device) /* must be called with BKL held */
{
info("USB Serial deregistering driver %s", device->description);
list_del(&device->driver_list);
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
- { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID),
- .driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID),
.driver_info = (kernel_ulong_t)&palm_os_4_probe },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID),
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_T_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TREO_650) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_TUNGSTEN_Z_ID) },
- { USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE31_ID) },
{ USB_DEVICE(PALM_VENDOR_ID, PALM_ZIRE_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_3_5_ID) },
{ USB_DEVICE(SONY_VENDOR_ID, SONY_CLIE_4_0_ID) },
.name = "visor",
},
.description = "Handspring Visor / Palm OS",
+ .usb_driver = &visor_driver,
.id_table = id_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
.name = "clie_5",
},
.description = "Sony Clie 5.0",
+ .usb_driver = &visor_driver,
.id_table = clie_id_5_table,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = 2,
.name = "clie_3.5",
},
.description = "Sony Clie 3.5",
+ .usb_driver = &visor_driver,
.id_table = clie_id_3_5_table,
.num_interrupt_in = 0,
.num_bulk_in = 1,
#define PALM_TUNGSTEN_T_ID 0x0060
#define PALM_TREO_650 0x0061
#define PALM_TUNGSTEN_Z_ID 0x0031
-#define PALM_ZIRE31_ID 0x0061
#define PALM_ZIRE_ID 0x0070
#define PALM_M100_ID 0x0080
.name = "whiteheatnofirm",
},
.description = "Connect Tech - WhiteHEAT - (prerenumeration)",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_prerenumeration,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
.name = "whiteheat",
},
.description = "Connect Tech - WhiteHEAT",
+ .usb_driver = &whiteheat_driver,
.id_table = id_table_std,
.num_interrupt_in = NUM_DONT_CARE,
.num_bulk_in = NUM_DONT_CARE,
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/module.h>
-#include <linux/usb_ch9.h>
#include <linux/usb/input.h>
#include "usb.h"
#include "onetouch.h"
* the end, scatter-gather buffers follow page boundaries. */
blk_queue_dma_alignment(sdev->request_queue, (512 - 1));
- /* Set the SCSI level to at least 2. We'll leave it at 3 if that's
- * what is originally reported. We need this to avoid confusing
- * the SCSI layer with devices that report 0 or 1, but need 10-byte
- * commands (ala ATAPI devices behind certain bridges, or devices
- * which simply have broken INQUIRY data).
- *
- * NOTE: This means /dev/sg programs (ala cdrecord) will get the
- * actual information. This seems to be the preference for
- * programs like that.
- *
- * NOTE: This also means that /proc/scsi/scsi and sysfs may report
- * the actual value or the modified one, depending on where the
- * data comes from.
- */
- if (sdev->scsi_level < SCSI_2)
- sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
-
/* Many devices have trouble transfering more than 32KB at a time,
* while others have trouble with more than 64K. At this time we
* are limiting both to 32K (64 sectores).
* a Get-Max-LUN request, we won't lose much by setting the
* revision level down to 2. The only devices that would be
* affected are those with sparse LUNs. */
- sdev->scsi_level = sdev->sdev_target->scsi_level = SCSI_2;
+ if (sdev->scsi_level > SCSI_2)
+ sdev->sdev_target->scsi_level =
+ sdev->scsi_level = SCSI_2;
/* USB-IDE bridges tend to report SK = 0x04 (Non-recoverable
* Hardware Error) when any low-level error occurs,
sdev->use_10_for_ms = 1;
}
+ /* The CB and CBI transports have no way to pass LUN values
+ * other than the bits in the second byte of a CDB. But those
+ * bits don't get set to the LUN value if the device reports
+ * scsi_level == 0 (UNKNOWN). Hence such devices must necessarily
+ * be single-LUN.
+ */
+ if ((us->protocol == US_PR_CB || us->protocol == US_PR_CBI) &&
+ sdev->scsi_level == SCSI_UNKNOWN)
+ us->max_lun = 0;
+
/* Some devices choke when they receive a PREVENT-ALLOW MEDIUM
* REMOVAL command, so suppress those commands. */
if (us->flags & US_FL_NOT_LOCKABLE)
#endif
/* Submitted by Olaf Hering, <olh@suse.de> SuSE Bugzilla #49049 */
-UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x0501,
+UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000,
"Sony",
"USB Floppy Drive",
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_CAPACITY ),
-/* Reported by Jan Mate <mate@fiit.stuba.sk> */
-UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000,
- "Sony Ericsson",
- "P990i",
- US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_FIX_CAPACITY ),
-
/* Reported by Kevin Cernekee <kpc-usbdev@gelato.uiuc.edu>
* Tested on hardware version 1.10.
* Entry is needed only for the initializer function override.
struct usb_endpoint_descriptor *ep_int = NULL;
/*
- * Find the endpoints we need.
+ * Find the first endpoint of each type we need.
* We are expecting a minimum of 2 endpoints - in and out (bulk).
- * An optional interrupt is OK (necessary for CBI protocol).
+ * An optional interrupt-in is OK (necessary for CBI protocol).
* We will ignore any others.
*/
for (i = 0; i < altsetting->desc.bNumEndpoints; i++) {
ep = &altsetting->endpoint[i].desc;
- /* Is it a BULK endpoint? */
if (usb_endpoint_xfer_bulk(ep)) {
- /* BULK in or out? */
- if (usb_endpoint_dir_in(ep))
- ep_in = ep;
- else
- ep_out = ep;
+ if (usb_endpoint_dir_in(ep)) {
+ if (!ep_in)
+ ep_in = ep;
+ } else {
+ if (!ep_out)
+ ep_out = ep;
+ }
}
- /* Is it an interrupt endpoint? */
- else if (usb_endpoint_xfer_int(ep)) {
- ep_int = ep;
+ else if (usb_endpoint_is_int_in(ep)) {
+ if (!ep_int)
+ ep_int = ep;
}
}
--- /dev/null
+/*
+ * output.c - Display Output Switch driver
+ *
+ * Copyright (C) 2006 Luming Yu <luming.yu@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#include <linux/module.h>
+#include <linux/video_output.h>
+#include <linux/err.h>
+#include <linux/ctype.h>
+
+
+MODULE_DESCRIPTION("Display Output Switcher Lowlevel Control Abstraction");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Luming Yu <luming.yu@intel.com>");
+
+static ssize_t video_output_show_state(struct class_device *dev,char *buf)
+{
+ ssize_t ret_size = 0;
+ struct output_device *od = to_output_device(dev);
+ if (od->props)
+ ret_size = sprintf(buf,"%.8x\n",od->props->get_status(od));
+ return ret_size;
+}
+
+static ssize_t video_output_store_state(struct class_device *dev,
+ const char *buf,size_t count)
+{
+ char *endp;
+ struct output_device *od = to_output_device(dev);
+ int request_state = simple_strtoul(buf,&endp,0);
+ size_t size = endp - buf;
+
+ if (*endp && isspace(*endp))
+ size++;
+ if (size != count)
+ return -EINVAL;
+
+ if (od->props) {
+ od->request_state = request_state;
+ od->props->set_state(od);
+ }
+ return count;
+}
+
+static void video_output_class_release(struct class_device *dev)
+{
+ struct output_device *od = to_output_device(dev);
+ kfree(od);
+}
+
+static struct class_device_attribute video_output_attributes[] = {
+ __ATTR(state, 0644, video_output_show_state, video_output_store_state),
+ __ATTR_NULL,
+};
+
+static struct class video_output_class = {
+ .name = "video_output",
+ .release = video_output_class_release,
+ .class_dev_attrs = video_output_attributes,
+};
+
+struct output_device *video_output_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct output_properties *op)
+{
+ struct output_device *new_dev;
+ int ret_code = 0;
+
+ new_dev = kzalloc(sizeof(struct output_device),GFP_KERNEL);
+ if (!new_dev) {
+ ret_code = -ENOMEM;
+ goto error_return;
+ }
+ new_dev->props = op;
+ new_dev->class_dev.class = &video_output_class;
+ new_dev->class_dev.dev = dev;
+ strlcpy(new_dev->class_dev.class_id,name,KOBJ_NAME_LEN);
+ class_set_devdata(&new_dev->class_dev,devdata);
+ ret_code = class_device_register(&new_dev->class_dev);
+ if (ret_code) {
+ kfree(new_dev);
+ goto error_return;
+ }
+ return new_dev;
+
+error_return:
+ return ERR_PTR(ret_code);
+}
+EXPORT_SYMBOL(video_output_register);
+
+void video_output_unregister(struct output_device *dev)
+{
+ if (!dev)
+ return;
+ class_device_unregister(&dev->class_dev);
+}
+EXPORT_SYMBOL(video_output_unregister);
+
+static void __exit video_output_class_exit(void)
+{
+ class_unregister(&video_output_class);
+}
+
+static int __init video_output_class_init(void)
+{
+ return class_register(&video_output_class);
+}
+
+postcore_initcall(video_output_class_init);
+module_exit(video_output_class_exit);
Version 1.47
------------
Fix oops in list_del during mount caused by unaligned string.
+Seek to SEEK_END forces check for update of file size for non-cached
+files.
Version 1.46
------------
{
/* origin == SEEK_END => we must revalidate the cached file length */
if (origin == SEEK_END) {
- int retval = cifs_revalidate(file->f_path.dentry);
+ int retval;
+
+ /* some applications poll for the file length in this strange
+ way so we must seek to end on non-oplocked files by
+ setting the revalidate time to zero */
+ if(file->f_path.dentry->d_inode)
+ CIFS_I(file->f_path.dentry->d_inode)->time = 0;
+
+ retval = cifs_revalidate(file->f_path.dentry);
if (retval < 0)
return (loff_t)retval;
}
pgoff_t end;
pgoff_t index;
int range_whole = 0;
- struct kvec iov[32];
+ struct kvec * iov;
int len;
int n_iov = 0;
pgoff_t next;
if((cifs_sb->tcon->ses) && (cifs_sb->tcon->ses->server))
if(cifs_sb->tcon->ses->server->secMode &
(SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- if(!experimEnabled)
+ if(!experimEnabled)
return generic_writepages(mapping, wbc);
+ iov = kmalloc(32 * sizeof(struct kvec), GFP_KERNEL);
+ if(iov == NULL)
+ return generic_writepages(mapping, wbc);
+
+
/*
* BB: Is this meaningful for a non-block-device file system?
* If it is, we should test it again after we do I/O
*/
if (wbc->nonblocking && bdi_write_congested(bdi)) {
wbc->encountered_congestion = 1;
+ kfree(iov);
return 0;
}
mapping->writeback_index = index;
FreeXid(xid);
-
+ kfree(iov);
return rc;
}
tmp_inode->i_atime = cnvrtDosUnixTm(
le16_to_cpu(pfindData->LastAccessDate),
le16_to_cpu(pfindData->LastAccessTime));
- tmp_inode->i_ctime = cnvrtDosUnixTm(
- le16_to_cpu(pfindData->LastWriteDate),
- le16_to_cpu(pfindData->LastWriteTime));
+ tmp_inode->i_ctime = cnvrtDosUnixTm(
+ le16_to_cpu(pfindData->LastWriteDate),
+ le16_to_cpu(pfindData->LastWriteTime));
AdjustForTZ(cifs_sb->tcon, tmp_inode);
attr = le16_to_cpu(pfindData->Attributes);
allocation_size = le32_to_cpu(pfindData->AllocationSize);
char c[28];
char d[28];
char *cd;
- char ki[16][48];
+ char (*ki)[48];
char *pd1;
char l[32], r[32];
char *rl;
if(pk1 == NULL)
return;
+ ki = kmalloc(16*48, GFP_KERNEL);
+ if(ki == NULL) {
+ kfree(pk1);
+ return;
+ }
+
cd = pk1 + 56;
pd1= cd + 56;
rl = pd1 + 64;
er = kmalloc(48+48+32+32+32, GFP_KERNEL);
if(er == NULL) {
kfree(pk1);
+ kfree(ki);
return;
}
erk = er+48;
permute(out, rl, perm6, 64);
kfree(pk1);
+ kfree(ki);
}
static void
config DLM
tristate "Distributed Lock Manager (DLM)"
- depends on IPV6 || IPV6=n
+ depends on SYSFS && (IPV6 || IPV6=n)
select CONFIGFS_FS
select IP_SCTP if DLM_SCTP
help
- A general purpose distributed lock manager for kernel or userspace
- applications.
+ A general purpose distributed lock manager for kernel or userspace
+ applications.
choice
prompt "Select DLM communications protocol"
depends on DLM
default DLM_TCP
help
- The DLM Can use TCP or SCTP for it's network communications.
- SCTP supports multi-homed operations whereas TCP doesn't.
- However, SCTP seems to have stability problems at the moment.
+ The DLM Can use TCP or SCTP for it's network communications.
+ SCTP supports multi-homed operations whereas TCP doesn't.
+ However, SCTP seems to have stability problems at the moment.
config DLM_TCP
bool "TCP/IP"
bool "DLM debugging"
depends on DLM
help
- Under the debugfs mount point, the name of each lockspace will
- appear as a file in the "dlm" directory. The output is the
- list of resource and locks the local node knows about.
+ Under the debugfs mount point, the name of each lockspace will
+ appear as a file in the "dlm" directory. The output is the
+ list of resource and locks the local node knows about.
endmenu
static void drop_node(struct config_group *, struct config_item *);
static void release_node(struct config_item *);
+static ssize_t show_cluster(struct config_item *i, struct configfs_attribute *a,
+ char *buf);
+static ssize_t store_cluster(struct config_item *i,
+ struct configfs_attribute *a,
+ const char *buf, size_t len);
static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
char *buf);
static ssize_t store_comm(struct config_item *i, struct configfs_attribute *a,
static ssize_t node_weight_read(struct node *nd, char *buf);
static ssize_t node_weight_write(struct node *nd, const char *buf, size_t len);
+struct cluster {
+ struct config_group group;
+ unsigned int cl_tcp_port;
+ unsigned int cl_buffer_size;
+ unsigned int cl_rsbtbl_size;
+ unsigned int cl_lkbtbl_size;
+ unsigned int cl_dirtbl_size;
+ unsigned int cl_recover_timer;
+ unsigned int cl_toss_secs;
+ unsigned int cl_scan_secs;
+ unsigned int cl_log_debug;
+};
+
+enum {
+ CLUSTER_ATTR_TCP_PORT = 0,
+ CLUSTER_ATTR_BUFFER_SIZE,
+ CLUSTER_ATTR_RSBTBL_SIZE,
+ CLUSTER_ATTR_LKBTBL_SIZE,
+ CLUSTER_ATTR_DIRTBL_SIZE,
+ CLUSTER_ATTR_RECOVER_TIMER,
+ CLUSTER_ATTR_TOSS_SECS,
+ CLUSTER_ATTR_SCAN_SECS,
+ CLUSTER_ATTR_LOG_DEBUG,
+};
+
+struct cluster_attribute {
+ struct configfs_attribute attr;
+ ssize_t (*show)(struct cluster *, char *);
+ ssize_t (*store)(struct cluster *, const char *, size_t);
+};
+
+static ssize_t cluster_set(struct cluster *cl, unsigned int *cl_field,
+ unsigned int *info_field, int check_zero,
+ const char *buf, size_t len)
+{
+ unsigned int x;
+
+ if (!capable(CAP_SYS_ADMIN))
+ return -EACCES;
+
+ x = simple_strtoul(buf, NULL, 0);
+
+ if (check_zero && !x)
+ return -EINVAL;
+
+ *cl_field = x;
+ *info_field = x;
+
+ return len;
+}
+
+#define __CONFIGFS_ATTR(_name,_mode,_read,_write) { \
+ .attr = { .ca_name = __stringify(_name), \
+ .ca_mode = _mode, \
+ .ca_owner = THIS_MODULE }, \
+ .show = _read, \
+ .store = _write, \
+}
+
+#define CLUSTER_ATTR(name, check_zero) \
+static ssize_t name##_write(struct cluster *cl, const char *buf, size_t len) \
+{ \
+ return cluster_set(cl, &cl->cl_##name, &dlm_config.ci_##name, \
+ check_zero, buf, len); \
+} \
+static ssize_t name##_read(struct cluster *cl, char *buf) \
+{ \
+ return snprintf(buf, PAGE_SIZE, "%u\n", cl->cl_##name); \
+} \
+static struct cluster_attribute cluster_attr_##name = \
+__CONFIGFS_ATTR(name, 0644, name##_read, name##_write)
+
+CLUSTER_ATTR(tcp_port, 1);
+CLUSTER_ATTR(buffer_size, 1);
+CLUSTER_ATTR(rsbtbl_size, 1);
+CLUSTER_ATTR(lkbtbl_size, 1);
+CLUSTER_ATTR(dirtbl_size, 1);
+CLUSTER_ATTR(recover_timer, 1);
+CLUSTER_ATTR(toss_secs, 1);
+CLUSTER_ATTR(scan_secs, 1);
+CLUSTER_ATTR(log_debug, 0);
+
+static struct configfs_attribute *cluster_attrs[] = {
+ [CLUSTER_ATTR_TCP_PORT] = &cluster_attr_tcp_port.attr,
+ [CLUSTER_ATTR_BUFFER_SIZE] = &cluster_attr_buffer_size.attr,
+ [CLUSTER_ATTR_RSBTBL_SIZE] = &cluster_attr_rsbtbl_size.attr,
+ [CLUSTER_ATTR_LKBTBL_SIZE] = &cluster_attr_lkbtbl_size.attr,
+ [CLUSTER_ATTR_DIRTBL_SIZE] = &cluster_attr_dirtbl_size.attr,
+ [CLUSTER_ATTR_RECOVER_TIMER] = &cluster_attr_recover_timer.attr,
+ [CLUSTER_ATTR_TOSS_SECS] = &cluster_attr_toss_secs.attr,
+ [CLUSTER_ATTR_SCAN_SECS] = &cluster_attr_scan_secs.attr,
+ [CLUSTER_ATTR_LOG_DEBUG] = &cluster_attr_log_debug.attr,
+ NULL,
+};
+
enum {
COMM_ATTR_NODEID = 0,
COMM_ATTR_LOCAL,
struct configfs_subsystem subsys;
};
-struct cluster {
- struct config_group group;
-};
-
struct spaces {
struct config_group ss_group;
};
static struct configfs_item_operations cluster_ops = {
.release = release_cluster,
+ .show_attribute = show_cluster,
+ .store_attribute = store_cluster,
};
static struct configfs_group_operations spaces_ops = {
static struct config_item_type cluster_type = {
.ct_item_ops = &cluster_ops,
+ .ct_attrs = cluster_attrs,
.ct_owner = THIS_MODULE,
};
cl->group.default_groups[1] = &cms->cs_group;
cl->group.default_groups[2] = NULL;
+ cl->cl_tcp_port = dlm_config.ci_tcp_port;
+ cl->cl_buffer_size = dlm_config.ci_buffer_size;
+ cl->cl_rsbtbl_size = dlm_config.ci_rsbtbl_size;
+ cl->cl_lkbtbl_size = dlm_config.ci_lkbtbl_size;
+ cl->cl_dirtbl_size = dlm_config.ci_dirtbl_size;
+ cl->cl_recover_timer = dlm_config.ci_recover_timer;
+ cl->cl_toss_secs = dlm_config.ci_toss_secs;
+ cl->cl_scan_secs = dlm_config.ci_scan_secs;
+ cl->cl_log_debug = dlm_config.ci_log_debug;
+
space_list = &sps->ss_group;
comm_list = &cms->cs_group;
return &cl->group;
* Functions for user space to read/write attributes
*/
+static ssize_t show_cluster(struct config_item *i, struct configfs_attribute *a,
+ char *buf)
+{
+ struct cluster *cl = to_cluster(i);
+ struct cluster_attribute *cla =
+ container_of(a, struct cluster_attribute, attr);
+ return cla->show ? cla->show(cl, buf) : 0;
+}
+
+static ssize_t store_cluster(struct config_item *i,
+ struct configfs_attribute *a,
+ const char *buf, size_t len)
+{
+ struct cluster *cl = to_cluster(i);
+ struct cluster_attribute *cla =
+ container_of(a, struct cluster_attribute, attr);
+ return cla->store ? cla->store(cl, buf, len) : -EINVAL;
+}
+
static ssize_t show_comm(struct config_item *i, struct configfs_attribute *a,
char *buf)
{
#define DEFAULT_RECOVER_TIMER 5
#define DEFAULT_TOSS_SECS 10
#define DEFAULT_SCAN_SECS 5
+#define DEFAULT_LOG_DEBUG 0
struct dlm_config_info dlm_config = {
- .tcp_port = DEFAULT_TCP_PORT,
- .buffer_size = DEFAULT_BUFFER_SIZE,
- .rsbtbl_size = DEFAULT_RSBTBL_SIZE,
- .lkbtbl_size = DEFAULT_LKBTBL_SIZE,
- .dirtbl_size = DEFAULT_DIRTBL_SIZE,
- .recover_timer = DEFAULT_RECOVER_TIMER,
- .toss_secs = DEFAULT_TOSS_SECS,
- .scan_secs = DEFAULT_SCAN_SECS
+ .ci_tcp_port = DEFAULT_TCP_PORT,
+ .ci_buffer_size = DEFAULT_BUFFER_SIZE,
+ .ci_rsbtbl_size = DEFAULT_RSBTBL_SIZE,
+ .ci_lkbtbl_size = DEFAULT_LKBTBL_SIZE,
+ .ci_dirtbl_size = DEFAULT_DIRTBL_SIZE,
+ .ci_recover_timer = DEFAULT_RECOVER_TIMER,
+ .ci_toss_secs = DEFAULT_TOSS_SECS,
+ .ci_scan_secs = DEFAULT_SCAN_SECS,
+ .ci_log_debug = DEFAULT_LOG_DEBUG
};
#define DLM_MAX_ADDR_COUNT 3
struct dlm_config_info {
- int tcp_port;
- int buffer_size;
- int rsbtbl_size;
- int lkbtbl_size;
- int dirtbl_size;
- int recover_timer;
- int toss_secs;
- int scan_secs;
+ int ci_tcp_port;
+ int ci_buffer_size;
+ int ci_rsbtbl_size;
+ int ci_lkbtbl_size;
+ int ci_dirtbl_size;
+ int ci_recover_timer;
+ int ci_toss_secs;
+ int ci_scan_secs;
+ int ci_log_debug;
};
extern struct dlm_config_info dlm_config;
#include <asm/uaccess.h>
#include <linux/dlm.h>
+#include "config.h"
#define DLM_LOCKSPACE_LEN 64
#define log_error(ls, fmt, args...) \
printk(KERN_ERR "dlm: %s: " fmt "\n", (ls)->ls_name , ##args)
-#define DLM_LOG_DEBUG
-#ifdef DLM_LOG_DEBUG
-#define log_debug(ls, fmt, args...) log_error(ls, fmt, ##args)
-#else
-#define log_debug(ls, fmt, args...)
-#endif
+#define log_debug(ls, fmt, args...) \
+do { \
+ if (dlm_config.ci_log_debug) \
+ printk(KERN_DEBUG "dlm: %s: " fmt "\n", \
+ (ls)->ls_name , ##args); \
+} while (0)
#define DLM_ASSERT(x, do) \
{ \
/* dlm_header is first element of all structs sent between nodes */
-#define DLM_HEADER_MAJOR 0x00020000
-#define DLM_HEADER_MINOR 0x00000001
+#define DLM_HEADER_MAJOR 0x00030000
+#define DLM_HEADER_MINOR 0x00000000
#define DLM_MSG 1
#define DLM_RCOM 2
uint32_t rc_type; /* DLM_RCOM_ */
int rc_result; /* multi-purpose */
uint64_t rc_id; /* match reply with request */
+ uint64_t rc_seq; /* sender's ls_recover_seq */
+ uint64_t rc_seq_reply; /* remote ls_recover_seq */
char rc_buf[0];
};
spinlock_t asts_spin;
struct list_head locks;
spinlock_t locks_spin;
+ struct list_head unlocking;
wait_queue_head_t wait;
};
mutex_unlock(&ls->ls_waiters_mutex);
}
+/* We clear the RESEND flag because we might be taking an lkb off the waiters
+ list as part of process_requestqueue (e.g. a lookup that has an optimized
+ request reply on the requestqueue) between dlm_recover_waiters_pre() which
+ set RESEND and dlm_recover_waiters_post() */
+
static int _remove_from_waiters(struct dlm_lkb *lkb)
{
int error = 0;
goto out;
}
lkb->lkb_wait_type = 0;
+ lkb->lkb_flags &= ~DLM_IFL_RESEND;
list_del(&lkb->lkb_wait_reply);
unhold_lkb(lkb);
out:
list_for_each_entry_reverse(r, &ls->ls_rsbtbl[b].toss,
res_hashchain) {
if (!time_after_eq(jiffies, r->res_toss_time +
- dlm_config.toss_secs * HZ))
+ dlm_config.ci_toss_secs * HZ))
continue;
found = 1;
break;
if (lkb->lkb_astaddr)
ms->m_asts |= AST_COMP;
- if (ms->m_type == DLM_MSG_REQUEST || ms->m_type == DLM_MSG_LOOKUP)
- memcpy(ms->m_extra, r->res_name, r->res_length);
+ /* compare with switch in create_message; send_remove() doesn't
+ use send_args() */
- else if (lkb->lkb_lvbptr)
+ switch (ms->m_type) {
+ case DLM_MSG_REQUEST:
+ case DLM_MSG_LOOKUP:
+ memcpy(ms->m_extra, r->res_name, r->res_length);
+ break;
+ case DLM_MSG_CONVERT:
+ case DLM_MSG_UNLOCK:
+ case DLM_MSG_REQUEST_REPLY:
+ case DLM_MSG_CONVERT_REPLY:
+ case DLM_MSG_GRANT:
+ if (!lkb->lkb_lvbptr)
+ break;
memcpy(ms->m_extra, lkb->lkb_lvbptr, r->res_ls->ls_lvblen);
-
+ break;
+ }
}
static int send_common(struct dlm_rsb *r, struct dlm_lkb *lkb, int mstype)
DLM_ASSERT(is_master_copy(lkb), dlm_print_lkb(lkb););
- if (receive_lvb(ls, lkb, ms))
- return -ENOMEM;
+ if (lkb->lkb_exflags & DLM_LKF_VALBLK) {
+ /* lkb was just created so there won't be an lvb yet */
+ lkb->lkb_lvbptr = allocate_lvb(ls);
+ if (!lkb->lkb_lvbptr)
+ return -ENOMEM;
+ }
return 0;
}
{
struct dlm_message *ms = (struct dlm_message *) hd;
struct dlm_ls *ls;
- int error;
+ int error = 0;
if (!recovery)
dlm_message_in(ms);
out:
dlm_put_lockspace(ls);
dlm_astd_wake();
- return 0;
+ return error;
}
if (middle_conversion(lkb)) {
hold_lkb(lkb);
ls->ls_stub_ms.m_result = -EINPROGRESS;
+ ls->ls_stub_ms.m_flags = lkb->lkb_flags;
_remove_from_waiters(lkb);
_receive_convert_reply(lkb, &ls->ls_stub_ms);
case DLM_MSG_UNLOCK:
hold_lkb(lkb);
ls->ls_stub_ms.m_result = -DLM_EUNLOCK;
+ ls->ls_stub_ms.m_flags = lkb->lkb_flags;
_remove_from_waiters(lkb);
_receive_unlock_reply(lkb, &ls->ls_stub_ms);
dlm_put_lkb(lkb);
case DLM_MSG_CANCEL:
hold_lkb(lkb);
ls->ls_stub_ms.m_result = -DLM_ECANCEL;
+ ls->ls_stub_ms.m_flags = lkb->lkb_flags;
_remove_from_waiters(lkb);
_receive_cancel_reply(lkb, &ls->ls_stub_ms);
dlm_put_lkb(lkb);
lock_rsb(r);
switch (error) {
+ case -EBADR:
+ /* There's a chance the new master received our lock before
+ dlm_recover_master_reply(), this wouldn't happen if we did
+ a barrier between recover_masters and recover_locks. */
+ log_debug(ls, "master copy not ready %x r %lx %s", lkb->lkb_id,
+ (unsigned long)r, r->res_name);
+ dlm_send_rcom_lock(r, lkb);
+ goto out;
case -EEXIST:
log_debug(ls, "master copy exists %x", lkb->lkb_id);
/* fall through */
/* an ack for dlm_recover_locks() which waits for replies from
all the locks it sends to new masters */
dlm_recovered_lock(r);
-
+ out:
unlock_rsb(r);
put_rsb(r);
dlm_put_lkb(lkb);
}
if (flags & DLM_LKF_VALBLK) {
- ua->lksb.sb_lvbptr = kmalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
+ ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
if (!ua->lksb.sb_lvbptr) {
kfree(ua);
__put_lkb(ls, lkb);
ua = (struct dlm_user_args *)lkb->lkb_astparam;
if (flags & DLM_LKF_VALBLK && !ua->lksb.sb_lvbptr) {
- ua->lksb.sb_lvbptr = kmalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
+ ua->lksb.sb_lvbptr = kzalloc(DLM_USER_LVB_LEN, GFP_KERNEL);
if (!ua->lksb.sb_lvbptr) {
error = -ENOMEM;
goto out_put;
goto out_put;
spin_lock(&ua->proc->locks_spin);
- list_del_init(&lkb->lkb_ownqueue);
+ /* dlm_user_add_ast() may have already taken lkb off the proc list */
+ if (!list_empty(&lkb->lkb_ownqueue))
+ list_move(&lkb->lkb_ownqueue, &ua->proc->unlocking);
spin_unlock(&ua->proc->locks_spin);
-
- /* this removes the reference for the proc->locks list added by
- dlm_user_request */
- unhold_lkb(lkb);
out_put:
dlm_put_lkb(lkb);
out:
/* this lkb was removed from the WAITING queue */
if (lkb->lkb_grmode == DLM_LOCK_IV) {
spin_lock(&ua->proc->locks_spin);
- list_del_init(&lkb->lkb_ownqueue);
+ list_move(&lkb->lkb_ownqueue, &ua->proc->unlocking);
spin_unlock(&ua->proc->locks_spin);
- unhold_lkb(lkb);
}
out_put:
dlm_put_lkb(lkb);
mutex_lock(&ls->ls_clear_proc_locks);
list_for_each_entry_safe(lkb, safe, &proc->locks, lkb_ownqueue) {
- if (lkb->lkb_ast_type) {
- list_del(&lkb->lkb_astqueue);
- unhold_lkb(lkb);
- }
-
list_del_init(&lkb->lkb_ownqueue);
if (lkb->lkb_exflags & DLM_LKF_PERSISTENT) {
dlm_put_lkb(lkb);
}
+
+ /* in-progress unlocks */
+ list_for_each_entry_safe(lkb, safe, &proc->unlocking, lkb_ownqueue) {
+ list_del_init(&lkb->lkb_ownqueue);
+ lkb->lkb_flags |= DLM_IFL_DEAD;
+ dlm_put_lkb(lkb);
+ }
+
+ list_for_each_entry_safe(lkb, safe, &proc->asts, lkb_astqueue) {
+ list_del(&lkb->lkb_astqueue);
+ dlm_put_lkb(lkb);
+ }
+
mutex_unlock(&ls->ls_clear_proc_locks);
unlock_recovery(ls);
}
+
while (!kthread_should_stop()) {
list_for_each_entry(ls, &lslist, ls_list)
dlm_scan_rsbs(ls);
- schedule_timeout_interruptible(dlm_config.scan_secs * HZ);
+ schedule_timeout_interruptible(dlm_config.ci_scan_secs * HZ);
}
return 0;
}
ls->ls_count = 0;
ls->ls_flags = 0;
- size = dlm_config.rsbtbl_size;
+ size = dlm_config.ci_rsbtbl_size;
ls->ls_rsbtbl_size = size;
ls->ls_rsbtbl = kmalloc(sizeof(struct dlm_rsbtable) * size, GFP_KERNEL);
rwlock_init(&ls->ls_rsbtbl[i].lock);
}
- size = dlm_config.lkbtbl_size;
+ size = dlm_config.ci_lkbtbl_size;
ls->ls_lkbtbl_size = size;
ls->ls_lkbtbl = kmalloc(sizeof(struct dlm_lkbtable) * size, GFP_KERNEL);
ls->ls_lkbtbl[i].counter = 1;
}
- size = dlm_config.dirtbl_size;
+ size = dlm_config.ci_dirtbl_size;
ls->ls_dirtbl_size = size;
ls->ls_dirtbl = kmalloc(sizeof(struct dlm_dirtable) * size, GFP_KERNEL);
mutex_init(&ls->ls_requestqueue_mutex);
mutex_init(&ls->ls_clear_proc_locks);
- ls->ls_recover_buf = kmalloc(dlm_config.buffer_size, GFP_KERNEL);
+ ls->ls_recover_buf = kmalloc(dlm_config.ci_buffer_size, GFP_KERNEL);
if (!ls->ls_recover_buf)
goto out_dirfree;
struct list_head writequeue; /* outgoing writequeue_entries */
spinlock_t writequeue_lock;
int nodeid;
+ struct work_struct swork; /* Send workqueue */
+ struct work_struct lwork; /* Locking workqueue */
};
static DEFINE_IDR(nodeinfo_idr);
atomic_t waiting_requests;
struct cbuf cb;
int eagain_flag;
+ struct work_struct work; /* Send workqueue */
};
/* An entry waiting to be sent */
static LIST_HEAD(write_nodes);
static DEFINE_SPINLOCK(write_nodes_lock);
+
/* Maximum number of incoming messages to process before
* doing a schedule()
*/
#define MAX_RX_MSG_COUNT 25
-/* Manage daemons */
-static struct task_struct *recv_task;
-static struct task_struct *send_task;
-static DECLARE_WAIT_QUEUE_HEAD(lowcomms_recv_wait);
+/* Work queues */
+static struct workqueue_struct *recv_workqueue;
+static struct workqueue_struct *send_workqueue;
+static struct workqueue_struct *lock_workqueue;
/* The SCTP connection */
static struct connection sctp_con;
+static void process_send_sockets(struct work_struct *work);
+static void process_recv_sockets(struct work_struct *work);
+static void process_lock_request(struct work_struct *work);
static int nodeid_to_addr(int nodeid, struct sockaddr *retaddr)
{
spin_lock_init(&ni->lock);
INIT_LIST_HEAD(&ni->writequeue);
spin_lock_init(&ni->writequeue_lock);
+ INIT_WORK(&ni->lwork, process_lock_request);
+ INIT_WORK(&ni->swork, process_send_sockets);
ni->nodeid = nodeid;
if (nodeid > max_nodeid)
/* Data or notification available on socket */
static void lowcomms_data_ready(struct sock *sk, int count_unused)
{
- atomic_inc(&sctp_con.waiting_requests);
if (test_and_set_bit(CF_READ_PENDING, &sctp_con.flags))
- return;
-
- wake_up_interruptible(&lowcomms_recv_wait);
+ queue_work(recv_workqueue, &sctp_con.work);
}
spin_lock_bh(&write_nodes_lock);
list_add_tail(&ni->write_list, &write_nodes);
spin_unlock_bh(&write_nodes_lock);
+ queue_work(send_workqueue, &ni->swork);
}
}
}
- wake_up_process(send_task);
}
/* Something happened to an association */
spin_lock_bh(&write_nodes_lock);
list_add_tail(&ni->write_list, &write_nodes);
spin_unlock_bh(&write_nodes_lock);
+ queue_work(send_workqueue, &ni->swork);
}
- wake_up_process(send_task);
}
break;
spin_lock_bh(&write_nodes_lock);
list_add_tail(&ni->write_list, &write_nodes);
spin_unlock_bh(&write_nodes_lock);
+ queue_work(send_workqueue, &ni->swork);
}
- wake_up_process(send_task);
}
}
return 0;
cbuf_add(&sctp_con.cb, ret);
+ // PJC: TODO: Add to node's workqueue....can we ??
ret = dlm_process_incoming_buffer(cpu_to_le32(sinfo->sinfo_ppid),
page_address(sctp_con.rx_page),
sctp_con.cb.base, sctp_con.cb.len,
if (result < 0)
log_print("Can't bind to port %d addr number %d",
- dlm_config.tcp_port, num);
+ dlm_config.ci_tcp_port, num);
return result;
}
/* Bind to all interfaces. */
for (i = 0; i < dlm_local_count; i++) {
memcpy(&localaddr, dlm_local_addr[i], sizeof(localaddr));
- make_sockaddr(&localaddr, dlm_config.tcp_port, &addr_len);
+ make_sockaddr(&localaddr, dlm_config.ci_tcp_port, &addr_len);
result = add_bind_addr(&localaddr, addr_len, num);
if (result)
spin_lock_bh(&write_nodes_lock);
list_add_tail(&ni->write_list, &write_nodes);
spin_unlock_bh(&write_nodes_lock);
- wake_up_process(send_task);
+
+ queue_work(send_workqueue, &ni->swork);
}
return;
return;
}
- make_sockaddr(&rem_addr, dlm_config.tcp_port, &addrlen);
+ make_sockaddr(&rem_addr, dlm_config.ci_tcp_port, &addrlen);
outmessage.msg_name = &rem_addr;
outmessage.msg_namelen = addrlen;
return 0;
}
-static int write_list_empty(void)
+// PJC: The work queue function for receiving.
+static void process_recv_sockets(struct work_struct *work)
{
- int status;
-
- spin_lock_bh(&write_nodes_lock);
- status = list_empty(&write_nodes);
- spin_unlock_bh(&write_nodes_lock);
-
- return status;
-}
-
-static int dlm_recvd(void *data)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- while (!kthread_should_stop()) {
+ if (test_and_clear_bit(CF_READ_PENDING, &sctp_con.flags)) {
+ int ret;
int count = 0;
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&lowcomms_recv_wait, &wait);
- if (!test_bit(CF_READ_PENDING, &sctp_con.flags))
- cond_resched();
- remove_wait_queue(&lowcomms_recv_wait, &wait);
- set_current_state(TASK_RUNNING);
-
- if (test_and_clear_bit(CF_READ_PENDING, &sctp_con.flags)) {
- int ret;
-
- do {
- ret = receive_from_sock();
+ do {
+ ret = receive_from_sock();
- /* Don't starve out everyone else */
- if (++count >= MAX_RX_MSG_COUNT) {
- cond_resched();
- count = 0;
- }
- } while (!kthread_should_stop() && ret >=0);
- }
- cond_resched();
+ /* Don't starve out everyone else */
+ if (++count >= MAX_RX_MSG_COUNT) {
+ cond_resched();
+ count = 0;
+ }
+ } while (!kthread_should_stop() && ret >=0);
}
-
- return 0;
+ cond_resched();
}
-static int dlm_sendd(void *data)
+// PJC: the work queue function for sending
+static void process_send_sockets(struct work_struct *work)
{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(sctp_con.sock->sk->sk_sleep, &wait);
-
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (write_list_empty())
- cond_resched();
- set_current_state(TASK_RUNNING);
-
- if (sctp_con.eagain_flag) {
- sctp_con.eagain_flag = 0;
- refill_write_queue();
- }
- process_output_queue();
+ if (sctp_con.eagain_flag) {
+ sctp_con.eagain_flag = 0;
+ refill_write_queue();
}
+ process_output_queue();
+}
- remove_wait_queue(sctp_con.sock->sk->sk_sleep, &wait);
-
- return 0;
+// PJC: Process lock requests from a particular node.
+// TODO: can we optimise this out on UP ??
+static void process_lock_request(struct work_struct *work)
+{
}
static void daemons_stop(void)
{
- kthread_stop(recv_task);
- kthread_stop(send_task);
+ destroy_workqueue(recv_workqueue);
+ destroy_workqueue(send_workqueue);
+ destroy_workqueue(lock_workqueue);
}
static int daemons_start(void)
{
- struct task_struct *p;
int error;
+ recv_workqueue = create_workqueue("dlm_recv");
+ error = IS_ERR(recv_workqueue);
+ if (error) {
+ log_print("can't start dlm_recv %d", error);
+ return error;
+ }
- p = kthread_run(dlm_recvd, NULL, "dlm_recvd");
- error = IS_ERR(p);
+ send_workqueue = create_singlethread_workqueue("dlm_send");
+ error = IS_ERR(send_workqueue);
if (error) {
- log_print("can't start dlm_recvd %d", error);
+ log_print("can't start dlm_send %d", error);
+ destroy_workqueue(recv_workqueue);
return error;
}
- recv_task = p;
- p = kthread_run(dlm_sendd, NULL, "dlm_sendd");
- error = IS_ERR(p);
+ lock_workqueue = create_workqueue("dlm_rlock");
+ error = IS_ERR(lock_workqueue);
if (error) {
- log_print("can't start dlm_sendd %d", error);
- kthread_stop(recv_task);
+ log_print("can't start dlm_rlock %d", error);
+ destroy_workqueue(send_workqueue);
+ destroy_workqueue(recv_workqueue);
return error;
}
- send_task = p;
return 0;
}
{
int error;
+ INIT_WORK(&sctp_con.work, process_recv_sockets);
+
error = init_sock();
if (error)
goto fail_sock;
for (i = 0; i < dlm_local_count; i++)
kfree(dlm_local_addr[i]);
}
-
*******************************************************************************
**
** Copyright (C) Sistina Software, Inc. 1997-2003 All rights reserved.
-** Copyright (C) 2004-2006 Red Hat, Inc. All rights reserved.
+** Copyright (C) 2004-2007 Red Hat, Inc. All rights reserved.
**
** This copyrighted material is made available to anyone wishing to use,
** modify, copy, or redistribute it subject to the terms and conditions
struct connection {
struct socket *sock; /* NULL if not connected */
uint32_t nodeid; /* So we know who we are in the list */
- struct rw_semaphore sock_sem; /* Stop connect races */
- struct list_head read_list; /* On this list when ready for reading */
- struct list_head write_list; /* On this list when ready for writing */
- struct list_head state_list; /* On this list when ready to connect */
+ struct mutex sock_mutex;
unsigned long flags; /* bit 1,2 = We are on the read/write lists */
#define CF_READ_PENDING 1
#define CF_WRITE_PENDING 2
struct page *rx_page;
struct cbuf cb;
int retries;
- atomic_t waiting_requests;
#define MAX_CONNECT_RETRIES 3
struct connection *othercon;
+ struct work_struct rwork; /* Receive workqueue */
+ struct work_struct swork; /* Send workqueue */
};
#define sock2con(x) ((struct connection *)(x)->sk_user_data)
static struct sockaddr_storage dlm_local_addr;
-/* Manage daemons */
-static struct task_struct *recv_task;
-static struct task_struct *send_task;
-
-static wait_queue_t lowcomms_send_waitq_head;
-static DECLARE_WAIT_QUEUE_HEAD(lowcomms_send_waitq);
-static wait_queue_t lowcomms_recv_waitq_head;
-static DECLARE_WAIT_QUEUE_HEAD(lowcomms_recv_waitq);
+/* Work queues */
+static struct workqueue_struct *recv_workqueue;
+static struct workqueue_struct *send_workqueue;
/* An array of pointers to connections, indexed by NODEID */
static struct connection **connections;
static struct kmem_cache *con_cache;
static int conn_array_size;
-/* List of sockets that have reads pending */
-static LIST_HEAD(read_sockets);
-static DEFINE_SPINLOCK(read_sockets_lock);
-
-/* List of sockets which have writes pending */
-static LIST_HEAD(write_sockets);
-static DEFINE_SPINLOCK(write_sockets_lock);
-
-/* List of sockets which have connects pending */
-static LIST_HEAD(state_sockets);
-static DEFINE_SPINLOCK(state_sockets_lock);
+static void process_recv_sockets(struct work_struct *work);
+static void process_send_sockets(struct work_struct *work);
static struct connection *nodeid2con(int nodeid, gfp_t allocation)
{
goto finish;
con->nodeid = nodeid;
- init_rwsem(&con->sock_sem);
+ mutex_init(&con->sock_mutex);
INIT_LIST_HEAD(&con->writequeue);
spin_lock_init(&con->writequeue_lock);
+ INIT_WORK(&con->swork, process_send_sockets);
+ INIT_WORK(&con->rwork, process_recv_sockets);
connections[nodeid] = con;
}
{
struct connection *con = sock2con(sk);
- atomic_inc(&con->waiting_requests);
- if (test_and_set_bit(CF_READ_PENDING, &con->flags))
- return;
-
- spin_lock_bh(&read_sockets_lock);
- list_add_tail(&con->read_list, &read_sockets);
- spin_unlock_bh(&read_sockets_lock);
-
- wake_up_interruptible(&lowcomms_recv_waitq);
+ if (!test_and_set_bit(CF_READ_PENDING, &con->flags))
+ queue_work(recv_workqueue, &con->rwork);
}
static void lowcomms_write_space(struct sock *sk)
{
struct connection *con = sock2con(sk);
- if (test_and_set_bit(CF_WRITE_PENDING, &con->flags))
- return;
-
- spin_lock_bh(&write_sockets_lock);
- list_add_tail(&con->write_list, &write_sockets);
- spin_unlock_bh(&write_sockets_lock);
-
- wake_up_interruptible(&lowcomms_send_waitq);
+ if (!test_and_set_bit(CF_WRITE_PENDING, &con->flags))
+ queue_work(send_workqueue, &con->swork);
}
static inline void lowcomms_connect_sock(struct connection *con)
{
- if (test_and_set_bit(CF_CONNECT_PENDING, &con->flags))
- return;
-
- spin_lock_bh(&state_sockets_lock);
- list_add_tail(&con->state_list, &state_sockets);
- spin_unlock_bh(&state_sockets_lock);
-
- wake_up_interruptible(&lowcomms_send_waitq);
+ if (!test_and_set_bit(CF_CONNECT_PENDING, &con->flags))
+ queue_work(send_workqueue, &con->swork);
}
static void lowcomms_state_change(struct sock *sk)
/* Close a remote connection and tidy up */
static void close_connection(struct connection *con, bool and_other)
{
- down_write(&con->sock_sem);
+ mutex_lock(&con->sock_mutex);
if (con->sock) {
sock_release(con->sock);
con->rx_page = NULL;
}
con->retries = 0;
- up_write(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
}
/* Data received from remote end */
int r;
int call_again_soon = 0;
- down_read(&con->sock_sem);
+ mutex_lock(&con->sock_mutex);
+
+ if (con->sock == NULL) {
+ ret = -EAGAIN;
+ goto out_close;
+ }
- if (con->sock == NULL)
- goto out;
if (con->rx_page == NULL) {
/*
* This doesn't need to be atomic, but I think it should
if (ret <= 0)
goto out_close;
+ if (ret == -EAGAIN)
+ goto out_resched;
+
if (ret == len)
call_again_soon = 1;
cbuf_add(&con->cb, ret);
con->rx_page = NULL;
}
-out:
if (call_again_soon)
goto out_resched;
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
return 0;
out_resched:
- lowcomms_data_ready(con->sock->sk, 0);
- up_read(&con->sock_sem);
- cond_resched();
- return 0;
+ if (!test_and_set_bit(CF_READ_PENDING, &con->flags))
+ queue_work(recv_workqueue, &con->rwork);
+ mutex_unlock(&con->sock_mutex);
+ return -EAGAIN;
out_close:
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
if (ret != -EAGAIN && !test_bit(CF_IS_OTHERCON, &con->flags)) {
close_connection(con, false);
/* Reconnect when there is something to send */
}
+ /* Don't return success if we really got EOF */
+ if (ret == 0)
+ ret = -EAGAIN;
return ret;
}
int len;
int nodeid;
struct connection *newcon;
+ struct connection *addcon;
memset(&peeraddr, 0, sizeof(peeraddr));
result = sock_create_kern(dlm_local_addr.ss_family, SOCK_STREAM,
if (result < 0)
return -ENOMEM;
- down_read(&con->sock_sem);
+ mutex_lock_nested(&con->sock_mutex, 0);
result = -ENOTCONN;
if (con->sock == NULL)
if (dlm_addr_to_nodeid(&peeraddr, &nodeid)) {
printk("dlm: connect from non cluster node\n");
sock_release(newsock);
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
return -1;
}
result = -ENOMEM;
goto accept_err;
}
- down_write(&newcon->sock_sem);
+ mutex_lock_nested(&newcon->sock_mutex, 1);
if (newcon->sock) {
struct connection *othercon = newcon->othercon;
othercon = kmem_cache_zalloc(con_cache, GFP_KERNEL);
if (!othercon) {
printk("dlm: failed to allocate incoming socket\n");
- up_write(&newcon->sock_sem);
+ mutex_unlock(&newcon->sock_mutex);
result = -ENOMEM;
goto accept_err;
}
othercon->nodeid = nodeid;
othercon->rx_action = receive_from_sock;
- init_rwsem(&othercon->sock_sem);
+ mutex_init(&othercon->sock_mutex);
+ INIT_WORK(&othercon->swork, process_send_sockets);
+ INIT_WORK(&othercon->rwork, process_recv_sockets);
set_bit(CF_IS_OTHERCON, &othercon->flags);
newcon->othercon = othercon;
}
othercon->sock = newsock;
newsock->sk->sk_user_data = othercon;
add_sock(newsock, othercon);
+ addcon = othercon;
}
else {
newsock->sk->sk_user_data = newcon;
newcon->rx_action = receive_from_sock;
add_sock(newsock, newcon);
-
+ addcon = newcon;
}
- up_write(&newcon->sock_sem);
+ mutex_unlock(&newcon->sock_mutex);
/*
* Add it to the active queue in case we got data
* beween processing the accept adding the socket
* to the read_sockets list
*/
- lowcomms_data_ready(newsock->sk, 0);
- up_read(&con->sock_sem);
+ if (!test_and_set_bit(CF_READ_PENDING, &addcon->flags))
+ queue_work(recv_workqueue, &addcon->rwork);
+ mutex_unlock(&con->sock_mutex);
return 0;
accept_err:
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
sock_release(newsock);
if (result != -EAGAIN)
return;
}
- down_write(&con->sock_sem);
+ mutex_lock(&con->sock_mutex);
if (con->retries++ > MAX_CONNECT_RETRIES)
goto out;
sock->sk->sk_user_data = con;
con->rx_action = receive_from_sock;
- make_sockaddr(&saddr, dlm_config.tcp_port, &addr_len);
+ make_sockaddr(&saddr, dlm_config.ci_tcp_port, &addr_len);
add_sock(sock, con);
result = 0;
}
out:
- up_write(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
return;
}
con->sock = sock;
/* Bind to our port */
- make_sockaddr(saddr, dlm_config.tcp_port, &addr_len);
+ make_sockaddr(saddr, dlm_config.ci_tcp_port, &addr_len);
result = sock->ops->bind(sock, (struct sockaddr *) saddr, addr_len);
if (result < 0) {
- printk("dlm: Can't bind to port %d\n", dlm_config.tcp_port);
+ printk("dlm: Can't bind to port %d\n", dlm_config.ci_tcp_port);
sock_release(sock);
sock = NULL;
con->sock = NULL;
result = sock->ops->listen(sock, 5);
if (result < 0) {
- printk("dlm: Can't listen on port %d\n", dlm_config.tcp_port);
+ printk("dlm: Can't listen on port %d\n", dlm_config.ci_tcp_port);
sock_release(sock);
sock = NULL;
goto create_out;
if (!con)
return NULL;
+ spin_lock(&con->writequeue_lock);
e = list_entry(con->writequeue.prev, struct writequeue_entry, list);
if ((&e->list == &con->writequeue) ||
(PAGE_CACHE_SIZE - e->end < len)) {
struct connection *con = e->con;
int users;
+ spin_lock(&con->writequeue_lock);
users = --e->users;
if (users)
goto out;
kunmap(e->page);
spin_unlock(&con->writequeue_lock);
- if (test_and_set_bit(CF_WRITE_PENDING, &con->flags) == 0) {
- spin_lock_bh(&write_sockets_lock);
- list_add_tail(&con->write_list, &write_sockets);
- spin_unlock_bh(&write_sockets_lock);
-
- wake_up_interruptible(&lowcomms_send_waitq);
+ if (!test_and_set_bit(CF_WRITE_PENDING, &con->flags)) {
+ queue_work(send_workqueue, &con->swork);
}
return;
struct writequeue_entry *e;
int len, offset;
- down_read(&con->sock_sem);
+ mutex_lock(&con->sock_mutex);
if (con->sock == NULL)
goto out_connect;
offset = e->offset;
BUG_ON(len == 0 && e->users == 0);
spin_unlock(&con->writequeue_lock);
+ kmap(e->page);
ret = 0;
if (len) {
}
spin_unlock(&con->writequeue_lock);
out:
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
return;
send_error:
- up_read(&con->sock_sem);
+ mutex_unlock(&con->sock_mutex);
close_connection(con, false);
lowcomms_connect_sock(con);
return;
out_connect:
- up_read(&con->sock_sem);
- lowcomms_connect_sock(con);
+ mutex_unlock(&con->sock_mutex);
+ connect_to_sock(con);
return;
}
if (con) {
clean_one_writequeue(con);
close_connection(con, true);
- atomic_set(&con->waiting_requests, 0);
}
return 0;
return -1;
}
-/* API send message call, may queue the request */
-/* N.B. This is the old interface - use the new one for new calls */
-int lowcomms_send_message(int nodeid, char *buf, int len, gfp_t allocation)
-{
- struct writequeue_entry *e;
- char *b;
-
- e = dlm_lowcomms_get_buffer(nodeid, len, allocation, &b);
- if (e) {
- memcpy(b, buf, len);
- dlm_lowcomms_commit_buffer(e);
- return 0;
- }
- return -ENOBUFS;
-}
-
/* Look for activity on active sockets */
-static void process_sockets(void)
+static void process_recv_sockets(struct work_struct *work)
{
- struct list_head *list;
- struct list_head *temp;
- int count = 0;
-
- spin_lock_bh(&read_sockets_lock);
- list_for_each_safe(list, temp, &read_sockets) {
+ struct connection *con = container_of(work, struct connection, rwork);
+ int err;
- struct connection *con =
- list_entry(list, struct connection, read_list);
- list_del(&con->read_list);
- clear_bit(CF_READ_PENDING, &con->flags);
-
- spin_unlock_bh(&read_sockets_lock);
-
- /* This can reach zero if we are processing requests
- * as they come in.
- */
- if (atomic_read(&con->waiting_requests) == 0) {
- spin_lock_bh(&read_sockets_lock);
- continue;
- }
-
- do {
- con->rx_action(con);
-
- /* Don't starve out everyone else */
- if (++count >= MAX_RX_MSG_COUNT) {
- cond_resched();
- count = 0;
- }
-
- } while (!atomic_dec_and_test(&con->waiting_requests) &&
- !kthread_should_stop());
-
- spin_lock_bh(&read_sockets_lock);
- }
- spin_unlock_bh(&read_sockets_lock);
+ clear_bit(CF_READ_PENDING, &con->flags);
+ do {
+ err = con->rx_action(con);
+ } while (!err);
}
-/* Try to send any messages that are pending
- */
-static void process_output_queue(void)
-{
- struct list_head *list;
- struct list_head *temp;
-
- spin_lock_bh(&write_sockets_lock);
- list_for_each_safe(list, temp, &write_sockets) {
- struct connection *con =
- list_entry(list, struct connection, write_list);
- clear_bit(CF_WRITE_PENDING, &con->flags);
- list_del(&con->write_list);
-
- spin_unlock_bh(&write_sockets_lock);
- send_to_sock(con);
- spin_lock_bh(&write_sockets_lock);
- }
- spin_unlock_bh(&write_sockets_lock);
-}
-static void process_state_queue(void)
+static void process_send_sockets(struct work_struct *work)
{
- struct list_head *list;
- struct list_head *temp;
-
- spin_lock_bh(&state_sockets_lock);
- list_for_each_safe(list, temp, &state_sockets) {
- struct connection *con =
- list_entry(list, struct connection, state_list);
- list_del(&con->state_list);
- clear_bit(CF_CONNECT_PENDING, &con->flags);
- spin_unlock_bh(&state_sockets_lock);
+ struct connection *con = container_of(work, struct connection, swork);
+ if (test_and_clear_bit(CF_CONNECT_PENDING, &con->flags)) {
connect_to_sock(con);
- spin_lock_bh(&state_sockets_lock);
}
- spin_unlock_bh(&state_sockets_lock);
+
+ clear_bit(CF_WRITE_PENDING, &con->flags);
+ send_to_sock(con);
}
}
}
-static int read_list_empty(void)
+static void work_stop(void)
{
- int status;
-
- spin_lock_bh(&read_sockets_lock);
- status = list_empty(&read_sockets);
- spin_unlock_bh(&read_sockets_lock);
-
- return status;
-}
-
-/* DLM Transport comms receive daemon */
-static int dlm_recvd(void *data)
-{
- init_waitqueue_entry(&lowcomms_recv_waitq_head, current);
- add_wait_queue(&lowcomms_recv_waitq, &lowcomms_recv_waitq_head);
-
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (read_list_empty())
- cond_resched();
- set_current_state(TASK_RUNNING);
-
- process_sockets();
- }
-
- return 0;
+ destroy_workqueue(recv_workqueue);
+ destroy_workqueue(send_workqueue);
}
-static int write_and_state_lists_empty(void)
+static int work_start(void)
{
- int status;
-
- spin_lock_bh(&write_sockets_lock);
- status = list_empty(&write_sockets);
- spin_unlock_bh(&write_sockets_lock);
-
- spin_lock_bh(&state_sockets_lock);
- if (list_empty(&state_sockets) == 0)
- status = 0;
- spin_unlock_bh(&state_sockets_lock);
-
- return status;
-}
-
-/* DLM Transport send daemon */
-static int dlm_sendd(void *data)
-{
- init_waitqueue_entry(&lowcomms_send_waitq_head, current);
- add_wait_queue(&lowcomms_send_waitq, &lowcomms_send_waitq_head);
-
- while (!kthread_should_stop()) {
- set_current_state(TASK_INTERRUPTIBLE);
- if (write_and_state_lists_empty())
- cond_resched();
- set_current_state(TASK_RUNNING);
-
- process_state_queue();
- process_output_queue();
- }
-
- return 0;
-}
-
-static void daemons_stop(void)
-{
- kthread_stop(recv_task);
- kthread_stop(send_task);
-}
-
-static int daemons_start(void)
-{
- struct task_struct *p;
int error;
-
- p = kthread_run(dlm_recvd, NULL, "dlm_recvd");
- error = IS_ERR(p);
+ recv_workqueue = create_workqueue("dlm_recv");
+ error = IS_ERR(recv_workqueue);
if (error) {
- log_print("can't start dlm_recvd %d", error);
+ log_print("can't start dlm_recv %d", error);
return error;
}
- recv_task = p;
- p = kthread_run(dlm_sendd, NULL, "dlm_sendd");
- error = IS_ERR(p);
+ send_workqueue = create_singlethread_workqueue("dlm_send");
+ error = IS_ERR(send_workqueue);
if (error) {
- log_print("can't start dlm_sendd %d", error);
- kthread_stop(recv_task);
+ log_print("can't start dlm_send %d", error);
+ destroy_workqueue(recv_workqueue);
return error;
}
- send_task = p;
return 0;
}
-/*
- * Return the largest buffer size we can cope with.
- */
-int lowcomms_max_buffer_size(void)
-{
- return PAGE_CACHE_SIZE;
-}
-
void dlm_lowcomms_stop(void)
{
int i;
connections[i]->flags |= 0xFF;
}
- daemons_stop();
+ work_stop();
clean_writequeues();
for (i = 0; i < conn_array_size; i++) {
if (error)
goto fail_unlisten;
- error = daemons_start();
+ error = work_start();
if (error)
goto fail_unlisten;
if (msglen < sizeof(struct dlm_header))
break;
err = -E2BIG;
- if (msglen > dlm_config.buffer_size) {
+ if (msglen > dlm_config.ci_buffer_size) {
log_print("message size %d from %d too big, buf len %d",
msglen, nodeid, len);
break;
if (msglen > sizeof(__tmp) &&
msg == (struct dlm_header *) __tmp) {
- msg = kmalloc(dlm_config.buffer_size, GFP_KERNEL);
+ msg = kmalloc(dlm_config.ci_buffer_size, GFP_KERNEL);
if (msg == NULL)
return ret;
}
rc->rc_type = type;
+ spin_lock(&ls->ls_recover_lock);
+ rc->rc_seq = ls->ls_recover_seq;
+ spin_unlock(&ls->ls_recover_lock);
+
*mh_ret = mh;
*rc_ret = rc;
return 0;
rf->rf_lsflags = ls->ls_exflags;
}
-static int check_config(struct dlm_ls *ls, struct rcom_config *rf, int nodeid)
+static int check_config(struct dlm_ls *ls, struct dlm_rcom *rc, int nodeid)
{
+ struct rcom_config *rf = (struct rcom_config *) rc->rc_buf;
+
+ if ((rc->rc_header.h_version & 0xFFFF0000) != DLM_HEADER_MAJOR) {
+ log_error(ls, "version mismatch: %x nodeid %d: %x",
+ DLM_HEADER_MAJOR | DLM_HEADER_MINOR, nodeid,
+ rc->rc_header.h_version);
+ return -EINVAL;
+ }
+
if (rf->rf_lvblen != ls->ls_lvblen ||
rf->rf_lsflags != ls->ls_exflags) {
log_error(ls, "config mismatch: %d,%x nodeid %d: %d,%x",
goto out;
allow_sync_reply(ls, &rc->rc_id);
- memset(ls->ls_recover_buf, 0, dlm_config.buffer_size);
+ memset(ls->ls_recover_buf, 0, dlm_config.ci_buffer_size);
send_rcom(ls, mh, rc);
log_debug(ls, "remote node %d not ready", nodeid);
rc->rc_result = 0;
} else
- error = check_config(ls, (struct rcom_config *) rc->rc_buf,
- nodeid);
+ error = check_config(ls, rc, nodeid);
/* the caller looks at rc_result for the remote recovery status */
out:
return error;
if (error)
return;
rc->rc_id = rc_in->rc_id;
+ rc->rc_seq_reply = rc_in->rc_seq;
rc->rc_result = dlm_recover_status(ls);
make_config(ls, (struct rcom_config *) rc->rc_buf);
if (nodeid == dlm_our_nodeid()) {
dlm_copy_master_names(ls, last_name, last_len,
ls->ls_recover_buf + len,
- dlm_config.buffer_size - len, nodeid);
+ dlm_config.ci_buffer_size - len, nodeid);
goto out;
}
memcpy(rc->rc_buf, last_name, last_len);
allow_sync_reply(ls, &rc->rc_id);
- memset(ls->ls_recover_buf, 0, dlm_config.buffer_size);
+ memset(ls->ls_recover_buf, 0, dlm_config.ci_buffer_size);
send_rcom(ls, mh, rc);
{
struct dlm_rcom *rc;
struct dlm_mhandle *mh;
- int error, inlen, outlen;
- int nodeid = rc_in->rc_header.h_nodeid;
- uint32_t status = dlm_recover_status(ls);
-
- /*
- * We can't run dlm_dir_rebuild_send (which uses ls_nodes) while
- * dlm_recoverd is running ls_nodes_reconfig (which changes ls_nodes).
- * It could only happen in rare cases where we get a late NAMES
- * message from a previous instance of recovery.
- */
-
- if (!(status & DLM_RS_NODES)) {
- log_debug(ls, "ignoring RCOM_NAMES from %u", nodeid);
- return;
- }
+ int error, inlen, outlen, nodeid;
nodeid = rc_in->rc_header.h_nodeid;
inlen = rc_in->rc_header.h_length - sizeof(struct dlm_rcom);
- outlen = dlm_config.buffer_size - sizeof(struct dlm_rcom);
+ outlen = dlm_config.ci_buffer_size - sizeof(struct dlm_rcom);
error = create_rcom(ls, nodeid, DLM_RCOM_NAMES_REPLY, outlen, &rc, &mh);
if (error)
return;
rc->rc_id = rc_in->rc_id;
+ rc->rc_seq_reply = rc_in->rc_seq;
dlm_copy_master_names(ls, rc_in->rc_buf, inlen, rc->rc_buf, outlen,
nodeid);
ret_nodeid = error;
rc->rc_result = ret_nodeid;
rc->rc_id = rc_in->rc_id;
+ rc->rc_seq_reply = rc_in->rc_seq;
send_rcom(ls, mh, rc);
}
memcpy(rc->rc_buf, rc_in->rc_buf, sizeof(struct rcom_lock));
rc->rc_id = rc_in->rc_id;
+ rc->rc_seq_reply = rc_in->rc_seq;
send_rcom(ls, mh, rc);
}
static void receive_rcom_lock_reply(struct dlm_ls *ls, struct dlm_rcom *rc_in)
{
- uint32_t status = dlm_recover_status(ls);
-
- if (!(status & DLM_RS_DIR)) {
- log_debug(ls, "ignoring RCOM_LOCK_REPLY from %u",
- rc_in->rc_header.h_nodeid);
- return;
- }
-
dlm_recover_process_copy(ls, rc_in);
}
rc->rc_type = DLM_RCOM_STATUS_REPLY;
rc->rc_id = rc_in->rc_id;
+ rc->rc_seq_reply = rc_in->rc_seq;
rc->rc_result = -ESRCH;
rf = (struct rcom_config *) rc->rc_buf;
return 0;
}
+static int is_old_reply(struct dlm_ls *ls, struct dlm_rcom *rc)
+{
+ uint64_t seq;
+ int rv = 0;
+
+ switch (rc->rc_type) {
+ case DLM_RCOM_STATUS_REPLY:
+ case DLM_RCOM_NAMES_REPLY:
+ case DLM_RCOM_LOOKUP_REPLY:
+ case DLM_RCOM_LOCK_REPLY:
+ spin_lock(&ls->ls_recover_lock);
+ seq = ls->ls_recover_seq;
+ spin_unlock(&ls->ls_recover_lock);
+ if (rc->rc_seq_reply != seq) {
+ log_debug(ls, "ignoring old reply %x from %d "
+ "seq_reply %llx expect %llx",
+ rc->rc_type, rc->rc_header.h_nodeid,
+ (unsigned long long)rc->rc_seq_reply,
+ (unsigned long long)seq);
+ rv = 1;
+ }
+ }
+ return rv;
+}
+
/* Called by dlm_recvd; corresponds to dlm_receive_message() but special
recovery-only comms are sent through here. */
}
if (dlm_recovery_stopped(ls) && (rc->rc_type != DLM_RCOM_STATUS)) {
- log_error(ls, "ignoring recovery message %x from %d",
+ log_debug(ls, "ignoring recovery message %x from %d",
rc->rc_type, nodeid);
goto out;
}
+ if (is_old_reply(ls, rc))
+ goto out;
+
if (nodeid != rc->rc_header.h_nodeid) {
log_error(ls, "bad rcom nodeid %d from %d",
rc->rc_header.h_nodeid, nodeid);
static void dlm_wait_timer_fn(unsigned long data)
{
struct dlm_ls *ls = (struct dlm_ls *) data;
- mod_timer(&ls->ls_timer, jiffies + (dlm_config.recover_timer * HZ));
+ mod_timer(&ls->ls_timer, jiffies + (dlm_config.ci_recover_timer * HZ));
wake_up(&ls->ls_wait_general);
}
init_timer(&ls->ls_timer);
ls->ls_timer.function = dlm_wait_timer_fn;
ls->ls_timer.data = (long) ls;
- ls->ls_timer.expires = jiffies + (dlm_config.recover_timer * HZ);
+ ls->ls_timer.expires = jiffies + (dlm_config.ci_recover_timer * HZ);
add_timer(&ls->ls_timer);
wait_event(ls->ls_wait_general, testfn(ls) || dlm_recovery_stopped(ls));
if (dlm_no_directory(ls))
count += recover_master_static(r);
- else if (!is_master(r) && dlm_is_removed(ls, r->res_nodeid)) {
+ else if (!is_master(r) &&
+ (dlm_is_removed(ls, r->res_nodeid) ||
+ rsb_flag(r, RSB_NEW_MASTER))) {
recover_master(r);
count++;
}
error = dlm_recover_members(ls, rv, &neg);
if (error) {
- log_error(ls, "recover_members failed %d", error);
+ log_debug(ls, "recover_members failed %d", error);
goto fail;
}
start = jiffies;
error = dlm_recover_directory(ls);
if (error) {
- log_error(ls, "recover_directory failed %d", error);
+ log_debug(ls, "recover_directory failed %d", error);
goto fail;
}
error = dlm_recover_directory_wait(ls);
if (error) {
- log_error(ls, "recover_directory_wait failed %d", error);
+ log_debug(ls, "recover_directory_wait failed %d", error);
goto fail;
}
error = dlm_recover_masters(ls);
if (error) {
- log_error(ls, "recover_masters failed %d", error);
+ log_debug(ls, "recover_masters failed %d", error);
goto fail;
}
error = dlm_recover_locks(ls);
if (error) {
- log_error(ls, "recover_locks failed %d", error);
+ log_debug(ls, "recover_locks failed %d", error);
goto fail;
}
error = dlm_recover_locks_wait(ls);
if (error) {
- log_error(ls, "recover_locks_wait failed %d", error);
+ log_debug(ls, "recover_locks_wait failed %d", error);
goto fail;
}
error = dlm_recover_locks_wait(ls);
if (error) {
- log_error(ls, "recover_locks_wait failed %d", error);
+ log_debug(ls, "recover_locks_wait failed %d", error);
goto fail;
}
}
dlm_set_recover_status(ls, DLM_RS_DONE);
error = dlm_recover_done_wait(ls);
if (error) {
- log_error(ls, "recover_done_wait failed %d", error);
+ log_debug(ls, "recover_done_wait failed %d", error);
goto fail;
}
error = enable_locking(ls, rv->seq);
if (error) {
- log_error(ls, "enable_locking failed %d", error);
+ log_debug(ls, "enable_locking failed %d", error);
goto fail;
}
error = dlm_process_requestqueue(ls);
if (error) {
- log_error(ls, "process_requestqueue failed %d", error);
+ log_debug(ls, "process_requestqueue failed %d", error);
goto fail;
}
error = dlm_recover_waiters_post(ls);
if (error) {
- log_error(ls, "recover_waiters_post failed %d", error);
+ log_debug(ls, "recover_waiters_post failed %d", error);
goto fail;
}
ua->lksb.sb_status == -EAGAIN && !list_empty(&lkb->lkb_ownqueue))
remove_ownqueue = 1;
+ /* unlocks or cancels of waiting requests need to be removed from the
+ proc's unlocking list, again there must be a better way... */
+
+ if (ua->lksb.sb_status == -DLM_EUNLOCK ||
+ (ua->lksb.sb_status == -DLM_ECANCEL &&
+ lkb->lkb_grmode == DLM_LOCK_IV))
+ remove_ownqueue = 1;
+
/* We want to copy the lvb to userspace when the completion
ast is read if the status is 0, the lock has an lvb and
lvb_ops says we should. We could probably have set_lvb_lock()
proc->lockspace = ls->ls_local_handle;
INIT_LIST_HEAD(&proc->asts);
INIT_LIST_HEAD(&proc->locks);
+ INIT_LIST_HEAD(&proc->unlocking);
spin_lock_init(&proc->asts_spin);
spin_lock_init(&proc->locks_spin);
init_waitqueue_head(&proc->wait);
rc->rc_type = cpu_to_le32(rc->rc_type);
rc->rc_result = cpu_to_le32(rc->rc_result);
rc->rc_id = cpu_to_le64(rc->rc_id);
+ rc->rc_seq = cpu_to_le64(rc->rc_seq);
+ rc->rc_seq_reply = cpu_to_le64(rc->rc_seq_reply);
if (type == DLM_RCOM_LOCK)
rcom_lock_out((struct rcom_lock *) rc->rc_buf);
rc->rc_type = le32_to_cpu(rc->rc_type);
rc->rc_result = le32_to_cpu(rc->rc_result);
rc->rc_id = le64_to_cpu(rc->rc_id);
+ rc->rc_seq = le64_to_cpu(rc->rc_seq);
+ rc->rc_seq_reply = le64_to_cpu(rc->rc_seq_reply);
if (rc->rc_type == DLM_RCOM_LOCK)
rcom_lock_in((struct rcom_lock *) rc->rc_buf);
select FS_POSIX_ACL
select CRC32
help
- A cluster filesystem.
+ A cluster filesystem.
- Allows a cluster of computers to simultaneously use a block device
- that is shared between them (with FC, iSCSI, NBD, etc...). GFS reads
- and writes to the block device like a local filesystem, but also uses
- a lock module to allow the computers coordinate their I/O so
- filesystem consistency is maintained. One of the nifty features of
- GFS is perfect consistency -- changes made to the filesystem on one
- machine show up immediately on all other machines in the cluster.
+ Allows a cluster of computers to simultaneously use a block device
+ that is shared between them (with FC, iSCSI, NBD, etc...). GFS reads
+ and writes to the block device like a local filesystem, but also uses
+ a lock module to allow the computers coordinate their I/O so
+ filesystem consistency is maintained. One of the nifty features of
+ GFS is perfect consistency -- changes made to the filesystem on one
+ machine show up immediately on all other machines in the cluster.
- To use the GFS2 filesystem, you will need to enable one or more of
- the below locking modules. Documentation and utilities for GFS2 can
- be found here: http://sources.redhat.com/cluster
+ To use the GFS2 filesystem, you will need to enable one or more of
+ the below locking modules. Documentation and utilities for GFS2 can
+ be found here: http://sources.redhat.com/cluster
config GFS2_FS_LOCKING_NOLOCK
tristate "GFS2 \"nolock\" locking module"
depends on GFS2_FS
help
- Single node locking module for GFS2.
+ Single node locking module for GFS2.
- Use this module if you want to use GFS2 on a single node without
- its clustering features. You can still take advantage of the
- large file support, and upgrade to running a full cluster later on
- if required.
+ Use this module if you want to use GFS2 on a single node without
+ its clustering features. You can still take advantage of the
+ large file support, and upgrade to running a full cluster later on
+ if required.
- If you will only be using GFS2 in cluster mode, you do not need this
- module.
+ If you will only be using GFS2 in cluster mode, you do not need this
+ module.
config GFS2_FS_LOCKING_DLM
tristate "GFS2 DLM locking module"
- depends on GFS2_FS && NET && INET && (IPV6 || IPV6=n)
+ depends on GFS2_FS && SYSFS && NET && INET && (IPV6 || IPV6=n)
select IP_SCTP if DLM_SCTP
select CONFIGFS_FS
select DLM
help
- Multiple node locking module for GFS2
-
- Most users of GFS2 will require this module. It provides the locking
- interface between GFS2 and the DLM, which is required to use GFS2
- in a cluster environment.
+ Multiple node locking module for GFS2
+ Most users of GFS2 will require this module. It provides the locking
+ interface between GFS2 and the DLM, which is required to use GFS2
+ in a cluster environment.
gfs2_free_data(ip, bstart, blen);
}
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_dinode_out(ip, dibh->b_data);
}
ip->i_di.di_size = size;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
error = gfs2_meta_inode_buffer(ip, &dibh);
if (error)
if (gfs2_is_stuffed(ip)) {
ip->i_di.di_size = size;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
gfs2_buffer_clear_tail(dibh, sizeof(struct gfs2_dinode) + size);
if (!error) {
ip->i_di.di_size = size;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
ip->i_di.di_flags |= GFS2_DIF_TRUNC_IN_PROG;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
ip->i_num.no_addr;
gfs2_buffer_clear_tail(dibh, sizeof(struct gfs2_dinode));
}
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
ip->i_di.di_flags &= ~GFS2_DIF_TRUNC_IN_PROG;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
memcpy(dibh->b_data + offset + sizeof(struct gfs2_dinode), buf, size);
if (ip->i_di.di_size < offset + size)
ip->i_di.di_size = offset + size;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
if (ip->i_di.di_size < offset + copied)
ip->i_di.di_size = offset + copied;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
*/
static int do_filldir_main(struct gfs2_inode *dip, u64 *offset,
- void *opaque, gfs2_filldir_t filldir,
+ void *opaque, filldir_t filldir,
const struct gfs2_dirent **darr, u32 entries,
int *copied)
{
const struct gfs2_dirent *dent, *dent_next;
- struct gfs2_inum_host inum;
u64 off, off_next;
unsigned int x, y;
int run = 0;
*offset = off;
}
- gfs2_inum_in(&inum, (char *)&dent->de_inum);
-
error = filldir(opaque, (const char *)(dent + 1),
be16_to_cpu(dent->de_name_len),
- off, &inum,
+ off, be64_to_cpu(dent->de_inum.no_addr),
be16_to_cpu(dent->de_type));
if (error)
return 1;
}
static int gfs2_dir_read_leaf(struct inode *inode, u64 *offset, void *opaque,
- gfs2_filldir_t filldir, int *copied,
- unsigned *depth, u64 leaf_no)
+ filldir_t filldir, int *copied, unsigned *depth,
+ u64 leaf_no)
{
struct gfs2_inode *ip = GFS2_I(inode);
struct buffer_head *bh;
*/
static int dir_e_read(struct inode *inode, u64 *offset, void *opaque,
- gfs2_filldir_t filldir)
+ filldir_t filldir)
{
struct gfs2_inode *dip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
}
int gfs2_dir_read(struct inode *inode, u64 *offset, void *opaque,
- gfs2_filldir_t filldir)
+ filldir_t filldir)
{
struct gfs2_inode *dip = GFS2_I(inode);
struct dirent_gather g;
break;
gfs2_trans_add_bh(ip->i_gl, bh, 1);
ip->i_di.di_entries++;
- ip->i_inode.i_mtime.tv_sec = ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_mtime = ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_dinode_out(ip, bh->b_data);
brelse(bh);
error = 0;
gfs2_consist_inode(dip);
gfs2_trans_add_bh(dip->i_gl, bh, 1);
dip->i_di.di_entries--;
- dip->i_inode.i_mtime.tv_sec = dip->i_inode.i_ctime.tv_sec = get_seconds();
+ dip->i_inode.i_mtime = dip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_dinode_out(dip, bh->b_data);
brelse(bh);
mark_inode_dirty(&dip->i_inode);
gfs2_trans_add_bh(dip->i_gl, bh, 1);
}
- dip->i_inode.i_mtime.tv_sec = dip->i_inode.i_ctime.tv_sec = get_seconds();
+ dip->i_inode.i_mtime = dip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_dinode_out(dip, bh->b_data);
brelse(bh);
return 0;
struct gfs2_inode;
struct gfs2_inum;
-/**
- * gfs2_filldir_t - Report a directory entry to the caller of gfs2_dir_read()
- * @opaque: opaque data used by the function
- * @name: the name of the directory entry
- * @length: the length of the name
- * @offset: the entry's offset in the directory
- * @inum: the inode number the entry points to
- * @type: the type of inode the entry points to
- *
- * Returns: 0 on success, 1 if buffer full
- */
-
-typedef int (*gfs2_filldir_t) (void *opaque,
- const char *name, unsigned int length,
- u64 offset,
- struct gfs2_inum_host *inum, unsigned int type);
-
int gfs2_dir_search(struct inode *dir, const struct qstr *filename,
struct gfs2_inum_host *inum, unsigned int *type);
int gfs2_dir_add(struct inode *inode, const struct qstr *filename,
const struct gfs2_inum_host *inum, unsigned int type);
int gfs2_dir_del(struct gfs2_inode *dip, const struct qstr *filename);
-int gfs2_dir_read(struct inode *inode, u64 * offset, void *opaque,
- gfs2_filldir_t filldir);
+int gfs2_dir_read(struct inode *inode, u64 *offset, void *opaque,
+ filldir_t filldir);
int gfs2_dir_mvino(struct gfs2_inode *dip, const struct qstr *filename,
struct gfs2_inum_host *new_inum, unsigned int new_type);
error = gfs2_meta_inode_buffer(ip, &dibh);
if (!error) {
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
(er->er_mode & S_IFMT));
ip->i_inode.i_mode = er->er_mode;
}
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
(ip->i_inode.i_mode & S_IFMT) == (er->er_mode & S_IFMT));
ip->i_inode.i_mode = er->er_mode;
}
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
error = gfs2_meta_inode_buffer(ip, &dibh);
if (!error) {
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
#include <linux/gfs2_ondisk.h>
#include <linux/list.h>
#include <linux/lm_interface.h>
+#include <linux/wait.h>
+#include <linux/rwsem.h>
#include <asm/uaccess.h>
#include "gfs2.h"
#include "super.h"
#include "util.h"
-struct greedy {
- struct gfs2_holder gr_gh;
- struct delayed_work gr_work;
-};
-
struct gfs2_gl_hash_bucket {
struct hlist_head hb_list;
};
static int gfs2_dump_lockstate(struct gfs2_sbd *sdp);
static int dump_glock(struct gfs2_glock *gl);
static int dump_inode(struct gfs2_inode *ip);
+static void gfs2_glock_xmote_th(struct gfs2_holder *gh);
+static void gfs2_glock_drop_th(struct gfs2_glock *gl);
+static DECLARE_RWSEM(gfs2_umount_flush_sem);
#define GFS2_GL_HASH_SHIFT 15
#define GFS2_GL_HASH_SIZE (1 << GFS2_GL_HASH_SHIFT)
return rv;
}
-/**
- * queue_empty - check to see if a glock's queue is empty
- * @gl: the glock
- * @head: the head of the queue to check
- *
- * This function protects the list in the event that a process already
- * has a holder on the list and is adding a second holder for itself.
- * The glmutex lock is what generally prevents processes from working
- * on the same glock at once, but the special case of adding a second
- * holder for yourself ("recursive" locking) doesn't involve locking
- * glmutex, making the spin lock necessary.
- *
- * Returns: 1 if the queue is empty
- */
-
-static inline int queue_empty(struct gfs2_glock *gl, struct list_head *head)
-{
- int empty;
- spin_lock(&gl->gl_spin);
- empty = list_empty(head);
- spin_unlock(&gl->gl_spin);
- return empty;
-}
-
/**
* search_bucket() - Find struct gfs2_glock by lock number
* @bucket: the bucket to search
gh->gh_flags = flags;
gh->gh_error = 0;
gh->gh_iflags = 0;
- init_completion(&gh->gh_wait);
-
- if (gh->gh_state == LM_ST_EXCLUSIVE)
- gh->gh_flags |= GL_LOCAL_EXCL;
-
gfs2_glock_hold(gl);
}
{
gh->gh_state = state;
gh->gh_flags = flags;
- if (gh->gh_state == LM_ST_EXCLUSIVE)
- gh->gh_flags |= GL_LOCAL_EXCL;
-
gh->gh_iflags &= 1 << HIF_ALLOCED;
gh->gh_ip = (unsigned long)__builtin_return_address(0);
}
kfree(gh);
}
+static void gfs2_holder_dispose_or_wake(struct gfs2_holder *gh)
+{
+ if (test_bit(HIF_DEALLOC, &gh->gh_iflags)) {
+ gfs2_holder_put(gh);
+ return;
+ }
+ clear_bit(HIF_WAIT, &gh->gh_iflags);
+ smp_mb();
+ wake_up_bit(&gh->gh_iflags, HIF_WAIT);
+}
+
+static int holder_wait(void *word)
+{
+ schedule();
+ return 0;
+}
+
+static void wait_on_holder(struct gfs2_holder *gh)
+{
+ might_sleep();
+ wait_on_bit(&gh->gh_iflags, HIF_WAIT, holder_wait, TASK_UNINTERRUPTIBLE);
+}
+
/**
* rq_mutex - process a mutex request in the queue
* @gh: the glock holder
list_del_init(&gh->gh_list);
/* gh->gh_error never examined. */
set_bit(GLF_LOCK, &gl->gl_flags);
- complete(&gh->gh_wait);
+ clear_bit(HIF_WAIT, &gh->gh_iflags);
+ smp_mb();
+ wake_up_bit(&gh->gh_iflags, HIF_WAIT);
return 1;
}
{
struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_sbd;
- const struct gfs2_glock_operations *glops = gl->gl_ops;
if (!relaxed_state_ok(gl->gl_state, gh->gh_state, gh->gh_flags)) {
if (list_empty(&gl->gl_holders)) {
gfs2_reclaim_glock(sdp);
}
- glops->go_xmote_th(gl, gh->gh_state, gh->gh_flags);
+ gfs2_glock_xmote_th(gh);
spin_lock(&gl->gl_spin);
}
return 1;
set_bit(GLF_LOCK, &gl->gl_flags);
} else {
struct gfs2_holder *next_gh;
- if (gh->gh_flags & GL_LOCAL_EXCL)
+ if (gh->gh_state == LM_ST_EXCLUSIVE)
return 1;
next_gh = list_entry(gl->gl_holders.next, struct gfs2_holder,
gh_list);
- if (next_gh->gh_flags & GL_LOCAL_EXCL)
+ if (next_gh->gh_state == LM_ST_EXCLUSIVE)
return 1;
}
gh->gh_error = 0;
set_bit(HIF_HOLDER, &gh->gh_iflags);
- complete(&gh->gh_wait);
+ gfs2_holder_dispose_or_wake(gh);
return 0;
}
static int rq_demote(struct gfs2_holder *gh)
{
struct gfs2_glock *gl = gh->gh_gl;
- const struct gfs2_glock_operations *glops = gl->gl_ops;
if (!list_empty(&gl->gl_holders))
return 1;
list_del_init(&gh->gh_list);
gh->gh_error = 0;
spin_unlock(&gl->gl_spin);
- if (test_bit(HIF_DEALLOC, &gh->gh_iflags))
- gfs2_holder_put(gh);
- else
- complete(&gh->gh_wait);
+ gfs2_holder_dispose_or_wake(gh);
spin_lock(&gl->gl_spin);
} else {
gl->gl_req_gh = gh;
if (gh->gh_state == LM_ST_UNLOCKED ||
gl->gl_state != LM_ST_EXCLUSIVE)
- glops->go_drop_th(gl);
+ gfs2_glock_drop_th(gl);
else
- glops->go_xmote_th(gl, gh->gh_state, gh->gh_flags);
+ gfs2_glock_xmote_th(gh);
spin_lock(&gl->gl_spin);
}
return 0;
}
-/**
- * rq_greedy - process a queued request to drop greedy status
- * @gh: the glock holder
- *
- * Returns: 1 if the queue is blocked
- */
-
-static int rq_greedy(struct gfs2_holder *gh)
-{
- struct gfs2_glock *gl = gh->gh_gl;
-
- list_del_init(&gh->gh_list);
- /* gh->gh_error never examined. */
- clear_bit(GLF_GREEDY, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
-
- gfs2_holder_uninit(gh);
- kfree(container_of(gh, struct greedy, gr_gh));
-
- spin_lock(&gl->gl_spin);
-
- return 0;
-}
-
/**
* run_queue - process holder structures on a glock
* @gl: the glock
if (test_bit(HIF_DEMOTE, &gh->gh_iflags))
blocked = rq_demote(gh);
- else if (test_bit(HIF_GREEDY, &gh->gh_iflags))
- blocked = rq_greedy(gh);
else
gfs2_assert_warn(gl->gl_sbd, 0);
gfs2_holder_init(gl, 0, 0, &gh);
set_bit(HIF_MUTEX, &gh.gh_iflags);
+ if (test_and_set_bit(HIF_WAIT, &gh.gh_iflags))
+ BUG();
spin_lock(&gl->gl_spin);
if (test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
} else {
gl->gl_owner = current;
gl->gl_ip = (unsigned long)__builtin_return_address(0);
- complete(&gh.gh_wait);
+ clear_bit(HIF_WAIT, &gh.gh_iflags);
+ smp_mb();
+ wake_up_bit(&gh.gh_iflags, HIF_WAIT);
}
spin_unlock(&gl->gl_spin);
- wait_for_completion(&gh.gh_wait);
+ wait_on_holder(&gh);
gfs2_holder_uninit(&gh);
}
return;
set_bit(HIF_DEMOTE, &new_gh->gh_iflags);
set_bit(HIF_DEALLOC, &new_gh->gh_iflags);
+ set_bit(HIF_WAIT, &new_gh->gh_iflags);
goto restart;
}
int op_done = 1;
gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags));
- gfs2_assert_warn(sdp, queue_empty(gl, &gl->gl_holders));
+ gfs2_assert_warn(sdp, list_empty(&gl->gl_holders));
gfs2_assert_warn(sdp, !(ret & LM_OUT_ASYNC));
state_change(gl, ret & LM_OUT_ST_MASK);
gfs2_glock_put(gl);
- if (gh) {
- if (test_bit(HIF_DEALLOC, &gh->gh_iflags))
- gfs2_holder_put(gh);
- else
- complete(&gh->gh_wait);
- }
+ if (gh)
+ gfs2_holder_dispose_or_wake(gh);
}
/**
*
*/
-void gfs2_glock_xmote_th(struct gfs2_glock *gl, unsigned int state, int flags)
+void gfs2_glock_xmote_th(struct gfs2_holder *gh)
{
+ struct gfs2_glock *gl = gh->gh_gl;
struct gfs2_sbd *sdp = gl->gl_sbd;
+ int flags = gh->gh_flags;
+ unsigned state = gh->gh_state;
const struct gfs2_glock_operations *glops = gl->gl_ops;
int lck_flags = flags & (LM_FLAG_TRY | LM_FLAG_TRY_1CB |
LM_FLAG_NOEXP | LM_FLAG_ANY |
LM_FLAG_PRIORITY);
unsigned int lck_ret;
+ if (glops->go_xmote_th)
+ glops->go_xmote_th(gl);
+
gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags));
- gfs2_assert_warn(sdp, queue_empty(gl, &gl->gl_holders));
+ gfs2_assert_warn(sdp, list_empty(&gl->gl_holders));
gfs2_assert_warn(sdp, state != LM_ST_UNLOCKED);
gfs2_assert_warn(sdp, state != gl->gl_state);
- if (gl->gl_state == LM_ST_EXCLUSIVE && glops->go_sync)
- glops->go_sync(gl);
-
gfs2_glock_hold(gl);
gl->gl_req_bh = xmote_bh;
const struct gfs2_glock_operations *glops = gl->gl_ops;
struct gfs2_holder *gh = gl->gl_req_gh;
- clear_bit(GLF_PREFETCH, &gl->gl_flags);
-
gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags));
- gfs2_assert_warn(sdp, queue_empty(gl, &gl->gl_holders));
+ gfs2_assert_warn(sdp, list_empty(&gl->gl_holders));
gfs2_assert_warn(sdp, !ret);
state_change(gl, LM_ST_UNLOCKED);
gfs2_glock_put(gl);
- if (gh) {
- if (test_bit(HIF_DEALLOC, &gh->gh_iflags))
- gfs2_holder_put(gh);
- else
- complete(&gh->gh_wait);
- }
+ if (gh)
+ gfs2_holder_dispose_or_wake(gh);
}
/**
*
*/
-void gfs2_glock_drop_th(struct gfs2_glock *gl)
+static void gfs2_glock_drop_th(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
const struct gfs2_glock_operations *glops = gl->gl_ops;
unsigned int ret;
+ if (glops->go_drop_th)
+ glops->go_drop_th(gl);
+
gfs2_assert_warn(sdp, test_bit(GLF_LOCK, &gl->gl_flags));
- gfs2_assert_warn(sdp, queue_empty(gl, &gl->gl_holders));
+ gfs2_assert_warn(sdp, list_empty(&gl->gl_holders));
gfs2_assert_warn(sdp, gl->gl_state != LM_ST_UNLOCKED);
- if (gl->gl_state == LM_ST_EXCLUSIVE && glops->go_sync)
- glops->go_sync(gl);
-
gfs2_glock_hold(gl);
gl->gl_req_bh = drop_bh;
if (gh->gh_flags & LM_FLAG_PRIORITY)
do_cancels(gh);
- wait_for_completion(&gh->gh_wait);
-
+ wait_on_holder(gh);
if (gh->gh_error)
return gh->gh_error;
struct gfs2_holder *existing;
BUG_ON(!gh->gh_owner);
+ if (test_and_set_bit(HIF_WAIT, &gh->gh_iflags))
+ BUG();
existing = find_holder_by_owner(&gl->gl_holders, gh->gh_owner);
if (existing) {
}
}
- clear_bit(GLF_PREFETCH, &gl->gl_flags);
-
return error;
}
spin_unlock(&gl->gl_spin);
}
-/**
- * gfs2_glock_prefetch - Try to prefetch a glock
- * @gl: the glock
- * @state: the state to prefetch in
- * @flags: flags passed to go_xmote_th()
- *
- */
-
-static void gfs2_glock_prefetch(struct gfs2_glock *gl, unsigned int state,
- int flags)
-{
- const struct gfs2_glock_operations *glops = gl->gl_ops;
-
- spin_lock(&gl->gl_spin);
-
- if (test_bit(GLF_LOCK, &gl->gl_flags) || !list_empty(&gl->gl_holders) ||
- !list_empty(&gl->gl_waiters1) || !list_empty(&gl->gl_waiters2) ||
- !list_empty(&gl->gl_waiters3) ||
- relaxed_state_ok(gl->gl_state, state, flags)) {
- spin_unlock(&gl->gl_spin);
- return;
- }
-
- set_bit(GLF_PREFETCH, &gl->gl_flags);
- set_bit(GLF_LOCK, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
-
- glops->go_xmote_th(gl, state, flags);
-}
-
-static void greedy_work(struct work_struct *work)
-{
- struct greedy *gr = container_of(work, struct greedy, gr_work.work);
- struct gfs2_holder *gh = &gr->gr_gh;
- struct gfs2_glock *gl = gh->gh_gl;
- const struct gfs2_glock_operations *glops = gl->gl_ops;
-
- clear_bit(GLF_SKIP_WAITERS2, &gl->gl_flags);
-
- if (glops->go_greedy)
- glops->go_greedy(gl);
-
- spin_lock(&gl->gl_spin);
-
- if (list_empty(&gl->gl_waiters2)) {
- clear_bit(GLF_GREEDY, &gl->gl_flags);
- spin_unlock(&gl->gl_spin);
- gfs2_holder_uninit(gh);
- kfree(gr);
- } else {
- gfs2_glock_hold(gl);
- list_add_tail(&gh->gh_list, &gl->gl_waiters2);
- run_queue(gl);
- spin_unlock(&gl->gl_spin);
- gfs2_glock_put(gl);
- }
-}
-
-/**
- * gfs2_glock_be_greedy -
- * @gl:
- * @time:
- *
- * Returns: 0 if go_greedy will be called, 1 otherwise
- */
-
-int gfs2_glock_be_greedy(struct gfs2_glock *gl, unsigned int time)
-{
- struct greedy *gr;
- struct gfs2_holder *gh;
-
- if (!time || gl->gl_sbd->sd_args.ar_localcaching ||
- test_and_set_bit(GLF_GREEDY, &gl->gl_flags))
- return 1;
-
- gr = kmalloc(sizeof(struct greedy), GFP_KERNEL);
- if (!gr) {
- clear_bit(GLF_GREEDY, &gl->gl_flags);
- return 1;
- }
- gh = &gr->gr_gh;
-
- gfs2_holder_init(gl, 0, 0, gh);
- set_bit(HIF_GREEDY, &gh->gh_iflags);
- INIT_DELAYED_WORK(&gr->gr_work, greedy_work);
-
- set_bit(GLF_SKIP_WAITERS2, &gl->gl_flags);
- schedule_delayed_work(&gr->gr_work, time);
-
- return 0;
-}
-
/**
* gfs2_glock_dq_uninit - dequeue a holder from a glock and initialize it
* @gh: the holder structure
return 1;
if (a->ln_number < b->ln_number)
return -1;
- if (gh_a->gh_state == LM_ST_SHARED && gh_b->gh_state == LM_ST_EXCLUSIVE)
- return 1;
- if (!(gh_a->gh_flags & GL_LOCAL_EXCL) && (gh_b->gh_flags & GL_LOCAL_EXCL))
- return 1;
+ BUG_ON(gh_a->gh_gl->gl_ops->go_type == gh_b->gh_gl->gl_ops->go_type);
return 0;
}
gfs2_glock_dq_uninit(&ghs[x]);
}
-/**
- * gfs2_glock_prefetch_num - prefetch a glock based on lock number
- * @sdp: the filesystem
- * @number: the lock number
- * @glops: the glock operations for the type of glock
- * @state: the state to acquire the glock in
- * @flags: modifier flags for the aquisition
- *
- * Returns: errno
- */
-
-void gfs2_glock_prefetch_num(struct gfs2_sbd *sdp, u64 number,
- const struct gfs2_glock_operations *glops,
- unsigned int state, int flags)
-{
- struct gfs2_glock *gl;
- int error;
-
- if (atomic_read(&sdp->sd_reclaim_count) <
- gfs2_tune_get(sdp, gt_reclaim_limit)) {
- error = gfs2_glock_get(sdp, number, glops, CREATE, &gl);
- if (!error) {
- gfs2_glock_prefetch(gl, state, flags);
- gfs2_glock_put(gl);
- }
- }
-}
-
/**
* gfs2_lvb_hold - attach a LVB from a glock
* @gl: The glock in question
if (!gl)
return;
- if (gl->gl_ops->go_callback)
- gl->gl_ops->go_callback(gl, state);
handle_callback(gl, state);
spin_lock(&gl->gl_spin);
struct lm_async_cb *async = data;
struct gfs2_glock *gl;
+ down_read(&gfs2_umount_flush_sem);
gl = gfs2_glock_find(sdp, &async->lc_name);
if (gfs2_assert_warn(sdp, gl))
return;
if (!gfs2_assert_warn(sdp, gl->gl_req_bh))
gl->gl_req_bh(gl, async->lc_ret);
gfs2_glock_put(gl);
+ up_read(&gfs2_umount_flush_sem);
return;
}
static int demote_ok(struct gfs2_glock *gl)
{
- struct gfs2_sbd *sdp = gl->gl_sbd;
const struct gfs2_glock_operations *glops = gl->gl_ops;
int demote = 1;
if (test_bit(GLF_STICKY, &gl->gl_flags))
demote = 0;
- else if (test_bit(GLF_PREFETCH, &gl->gl_flags))
- demote = time_after_eq(jiffies, gl->gl_stamp +
- gfs2_tune_get(sdp, gt_prefetch_secs) * HZ);
else if (glops->go_demote_ok)
demote = glops->go_demote_ok(gl);
atomic_inc(&sdp->sd_reclaimed);
if (gfs2_glmutex_trylock(gl)) {
- if (queue_empty(gl, &gl->gl_holders) &&
+ if (list_empty(&gl->gl_holders) &&
gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl))
handle_callback(gl, LM_ST_UNLOCKED);
gfs2_glmutex_unlock(gl);
return;
if (gfs2_glmutex_trylock(gl)) {
- if (queue_empty(gl, &gl->gl_holders) &&
+ if (list_empty(&gl->gl_holders) &&
gl->gl_state != LM_ST_UNLOCKED && demote_ok(gl))
goto out_schedule;
gfs2_glmutex_unlock(gl);
}
if (gfs2_glmutex_trylock(gl)) {
- if (queue_empty(gl, &gl->gl_holders) &&
+ if (list_empty(&gl->gl_holders) &&
gl->gl_state != LM_ST_UNLOCKED)
handle_callback(gl, LM_ST_UNLOCKED);
gfs2_glmutex_unlock(gl);
t = jiffies;
}
+ down_write(&gfs2_umount_flush_sem);
invalidate_inodes(sdp->sd_vfs);
+ up_write(&gfs2_umount_flush_sem);
msleep(10);
}
}
#define LM_FLAG_ANY 0x00000008
#define LM_FLAG_PRIORITY 0x00000010 */
-#define GL_LOCAL_EXCL 0x00000020
#define GL_ASYNC 0x00000040
#define GL_EXACT 0x00000080
#define GL_SKIP 0x00000100
void gfs2_holder_reinit(unsigned int state, unsigned flags,
struct gfs2_holder *gh);
void gfs2_holder_uninit(struct gfs2_holder *gh);
-
-void gfs2_glock_xmote_th(struct gfs2_glock *gl, unsigned int state, int flags);
-void gfs2_glock_drop_th(struct gfs2_glock *gl);
-
int gfs2_glock_nq(struct gfs2_holder *gh);
int gfs2_glock_poll(struct gfs2_holder *gh);
int gfs2_glock_wait(struct gfs2_holder *gh);
void gfs2_glock_dq(struct gfs2_holder *gh);
-int gfs2_glock_be_greedy(struct gfs2_glock *gl, unsigned int time);
-
void gfs2_glock_dq_uninit(struct gfs2_holder *gh);
int gfs2_glock_nq_num(struct gfs2_sbd *sdp,
u64 number, const struct gfs2_glock_operations *glops,
void gfs2_glock_dq_m(unsigned int num_gh, struct gfs2_holder *ghs);
void gfs2_glock_dq_uninit_m(unsigned int num_gh, struct gfs2_holder *ghs);
-void gfs2_glock_prefetch_num(struct gfs2_sbd *sdp, u64 number,
- const struct gfs2_glock_operations *glops,
- unsigned int state, int flags);
-
/**
* gfs2_glock_nq_init - intialize a holder and enqueue it on a glock
* @gl: the glock
static void meta_go_sync(struct gfs2_glock *gl)
{
+ if (gl->gl_state != LM_ST_EXCLUSIVE)
+ return;
+
if (test_and_clear_bit(GLF_DIRTY, &gl->gl_flags)) {
gfs2_log_flush(gl->gl_sbd, gl);
gfs2_meta_sync(gl);
gfs2_ail_empty_gl(gl);
}
-
}
/**
gl->gl_vn++;
}
+/**
+ * inode_go_sync - Sync the dirty data and/or metadata for an inode glock
+ * @gl: the glock protecting the inode
+ *
+ */
+
+static void inode_go_sync(struct gfs2_glock *gl)
+{
+ struct gfs2_inode *ip = gl->gl_object;
+
+ if (ip && !S_ISREG(ip->i_inode.i_mode))
+ ip = NULL;
+
+ if (test_bit(GLF_DIRTY, &gl->gl_flags)) {
+ gfs2_log_flush(gl->gl_sbd, gl);
+ if (ip)
+ filemap_fdatawrite(ip->i_inode.i_mapping);
+ gfs2_meta_sync(gl);
+ if (ip) {
+ struct address_space *mapping = ip->i_inode.i_mapping;
+ int error = filemap_fdatawait(mapping);
+ if (error == -ENOSPC)
+ set_bit(AS_ENOSPC, &mapping->flags);
+ else if (error)
+ set_bit(AS_EIO, &mapping->flags);
+ }
+ clear_bit(GLF_DIRTY, &gl->gl_flags);
+ gfs2_ail_empty_gl(gl);
+ }
+}
+
/**
* inode_go_xmote_th - promote/demote a glock
* @gl: the glock
*
*/
-static void inode_go_xmote_th(struct gfs2_glock *gl, unsigned int state,
- int flags)
+static void inode_go_xmote_th(struct gfs2_glock *gl)
{
if (gl->gl_state != LM_ST_UNLOCKED)
gfs2_pte_inval(gl);
- gfs2_glock_xmote_th(gl, state, flags);
+ if (gl->gl_state == LM_ST_EXCLUSIVE)
+ inode_go_sync(gl);
}
/**
static void inode_go_drop_th(struct gfs2_glock *gl)
{
gfs2_pte_inval(gl);
- gfs2_glock_drop_th(gl);
-}
-
-/**
- * inode_go_sync - Sync the dirty data and/or metadata for an inode glock
- * @gl: the glock protecting the inode
- *
- */
-
-static void inode_go_sync(struct gfs2_glock *gl)
-{
- struct gfs2_inode *ip = gl->gl_object;
-
- if (ip && !S_ISREG(ip->i_inode.i_mode))
- ip = NULL;
-
- if (test_bit(GLF_DIRTY, &gl->gl_flags)) {
- gfs2_log_flush(gl->gl_sbd, gl);
- if (ip)
- filemap_fdatawrite(ip->i_inode.i_mapping);
- gfs2_meta_sync(gl);
- if (ip) {
- struct address_space *mapping = ip->i_inode.i_mapping;
- int error = filemap_fdatawait(mapping);
- if (error == -ENOSPC)
- set_bit(AS_ENOSPC, &mapping->flags);
- else if (error)
- set_bit(AS_EIO, &mapping->flags);
- }
- clear_bit(GLF_DIRTY, &gl->gl_flags);
- gfs2_ail_empty_gl(gl);
- }
+ if (gl->gl_state == LM_ST_EXCLUSIVE)
+ inode_go_sync(gl);
}
/**
if ((ip->i_di.di_flags & GFS2_DIF_TRUNC_IN_PROG) &&
(gl->gl_state == LM_ST_EXCLUSIVE) &&
- (gh->gh_flags & GL_LOCAL_EXCL))
+ (gh->gh_state == LM_ST_EXCLUSIVE))
error = gfs2_truncatei_resume(ip);
return error;
gfs2_meta_cache_flush(ip);
}
-/**
- * inode_greedy -
- * @gl: the glock
- *
- */
-
-static void inode_greedy(struct gfs2_glock *gl)
-{
- struct gfs2_sbd *sdp = gl->gl_sbd;
- struct gfs2_inode *ip = gl->gl_object;
- unsigned int quantum = gfs2_tune_get(sdp, gt_greedy_quantum);
- unsigned int max = gfs2_tune_get(sdp, gt_greedy_max);
- unsigned int new_time;
-
- spin_lock(&ip->i_spin);
-
- if (time_after(ip->i_last_pfault + quantum, jiffies)) {
- new_time = ip->i_greedy + quantum;
- if (new_time > max)
- new_time = max;
- } else {
- new_time = ip->i_greedy - quantum;
- if (!new_time || new_time > max)
- new_time = 1;
- }
-
- ip->i_greedy = new_time;
-
- spin_unlock(&ip->i_spin);
-
- iput(&ip->i_inode);
-}
-
/**
* rgrp_go_demote_ok - Check to see if it's ok to unlock a RG's glock
* @gl: the glock
*
*/
-static void trans_go_xmote_th(struct gfs2_glock *gl, unsigned int state,
- int flags)
+static void trans_go_xmote_th(struct gfs2_glock *gl)
{
struct gfs2_sbd *sdp = gl->gl_sbd;
gfs2_meta_syncfs(sdp);
gfs2_log_shutdown(sdp);
}
-
- gfs2_glock_xmote_th(gl, state, flags);
}
/**
gfs2_meta_syncfs(sdp);
gfs2_log_shutdown(sdp);
}
-
- gfs2_glock_drop_th(gl);
}
/**
}
const struct gfs2_glock_operations gfs2_meta_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
+ .go_xmote_th = meta_go_sync,
+ .go_drop_th = meta_go_sync,
.go_type = LM_TYPE_META,
};
.go_xmote_th = inode_go_xmote_th,
.go_xmote_bh = inode_go_xmote_bh,
.go_drop_th = inode_go_drop_th,
- .go_sync = inode_go_sync,
.go_inval = inode_go_inval,
.go_demote_ok = inode_go_demote_ok,
.go_lock = inode_go_lock,
.go_unlock = inode_go_unlock,
- .go_greedy = inode_greedy,
.go_type = LM_TYPE_INODE,
};
const struct gfs2_glock_operations gfs2_rgrp_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
- .go_sync = meta_go_sync,
.go_inval = meta_go_inval,
.go_demote_ok = rgrp_go_demote_ok,
.go_lock = rgrp_go_lock,
};
const struct gfs2_glock_operations gfs2_iopen_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
.go_type = LM_TYPE_IOPEN,
};
const struct gfs2_glock_operations gfs2_flock_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
.go_type = LM_TYPE_FLOCK,
};
const struct gfs2_glock_operations gfs2_nondisk_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
.go_type = LM_TYPE_NONDISK,
};
const struct gfs2_glock_operations gfs2_quota_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
.go_demote_ok = quota_go_demote_ok,
.go_type = LM_TYPE_QUOTA,
};
const struct gfs2_glock_operations gfs2_journal_glops = {
- .go_xmote_th = gfs2_glock_xmote_th,
- .go_drop_th = gfs2_glock_drop_th,
.go_type = LM_TYPE_JOURNAL,
};
};
struct gfs2_glock_operations {
- void (*go_xmote_th) (struct gfs2_glock *gl, unsigned int state, int flags);
+ void (*go_xmote_th) (struct gfs2_glock *gl);
void (*go_xmote_bh) (struct gfs2_glock *gl);
void (*go_drop_th) (struct gfs2_glock *gl);
void (*go_drop_bh) (struct gfs2_glock *gl);
- void (*go_sync) (struct gfs2_glock *gl);
void (*go_inval) (struct gfs2_glock *gl, int flags);
int (*go_demote_ok) (struct gfs2_glock *gl);
int (*go_lock) (struct gfs2_holder *gh);
void (*go_unlock) (struct gfs2_holder *gh);
- void (*go_callback) (struct gfs2_glock *gl, unsigned int state);
- void (*go_greedy) (struct gfs2_glock *gl);
const int go_type;
};
HIF_MUTEX = 0,
HIF_PROMOTE = 1,
HIF_DEMOTE = 2,
- HIF_GREEDY = 3,
/* States */
HIF_ALLOCED = 4,
HIF_HOLDER = 6,
HIF_FIRST = 7,
HIF_ABORTED = 9,
+ HIF_WAIT = 10,
};
struct gfs2_holder {
int gh_error;
unsigned long gh_iflags;
- struct completion gh_wait;
unsigned long gh_ip;
};
enum {
GLF_LOCK = 1,
GLF_STICKY = 2,
- GLF_PREFETCH = 3,
GLF_DIRTY = 5,
GLF_SKIP_WAITERS2 = 6,
- GLF_GREEDY = 7,
};
struct gfs2_glock {
unsigned long gl_ip;
struct list_head gl_holders;
struct list_head gl_waiters1; /* HIF_MUTEX */
- struct list_head gl_waiters2; /* HIF_DEMOTE, HIF_GREEDY */
+ struct list_head gl_waiters2; /* HIF_DEMOTE */
struct list_head gl_waiters3; /* HIF_PROMOTE */
const struct gfs2_glock_operations *gl_ops;
spinlock_t i_spin;
struct rw_semaphore i_rw_mutex;
- unsigned int i_greedy;
unsigned long i_last_pfault;
struct buffer_head *i_cache[GFS2_MAX_META_HEIGHT];
unsigned int gt_atime_quantum; /* Min secs between atime updates */
unsigned int gt_new_files_jdata;
unsigned int gt_new_files_directio;
- unsigned int gt_max_atomic_write; /* Split big writes into this size */
unsigned int gt_max_readahead; /* Max bytes to read-ahead from disk */
unsigned int gt_lockdump_size;
unsigned int gt_stall_secs; /* Detects trouble! */
unsigned int gt_complain_secs;
unsigned int gt_reclaim_limit; /* Max num of glocks in reclaim list */
unsigned int gt_entries_per_readdir;
- unsigned int gt_prefetch_secs; /* Usage window for prefetched glocks */
- unsigned int gt_greedy_default;
- unsigned int gt_greedy_quantum;
- unsigned int gt_greedy_max;
unsigned int gt_statfs_quantum;
unsigned int gt_statfs_slow;
};
*
* Returns: errno
*/
-
int gfs2_change_nlink(struct gfs2_inode *ip, int diff)
{
- struct gfs2_sbd *sdp = ip->i_inode.i_sb->s_fs_info;
struct buffer_head *dibh;
u32 nlink;
int error;
else
drop_nlink(&ip->i_inode);
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
mark_inode_dirty(&ip->i_inode);
- if (ip->i_inode.i_nlink == 0) {
- struct gfs2_rgrpd *rgd;
- struct gfs2_holder ri_gh, rg_gh;
-
- error = gfs2_rindex_hold(sdp, &ri_gh);
- if (error)
- goto out;
- error = -EIO;
- rgd = gfs2_blk2rgrpd(sdp, ip->i_num.no_addr);
- if (!rgd)
- goto out_norgrp;
- error = gfs2_glock_nq_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, &rg_gh);
- if (error)
- goto out_norgrp;
-
+ if (ip->i_inode.i_nlink == 0)
gfs2_unlink_di(&ip->i_inode); /* mark inode unlinked */
- gfs2_glock_dq_uninit(&rg_gh);
-out_norgrp:
- gfs2_glock_dq_uninit(&ri_gh);
- }
-out:
+
return error;
}
struct inode *gfs2_lookup_simple(struct inode *dip, const char *name)
{
struct qstr qstr;
+ struct inode *inode;
gfs2_str2qstr(&qstr, name);
- return gfs2_lookupi(dip, &qstr, 1, NULL);
+ inode = gfs2_lookupi(dip, &qstr, 1, NULL);
+ /* gfs2_lookupi has inconsistent callers: vfs
+ * related routines expect NULL for no entry found,
+ * gfs2_lookup_simple callers expect ENOENT
+ * and do not check for NULL.
+ */
+ if (inode == NULL)
+ return ERR_PTR(-ENOENT);
+ else
+ return inode;
}
* @is_root: If 1, ignore the caller's permissions
* @i_gh: An uninitialized holder for the new inode glock
*
- * There will always be a vnode (Linux VFS inode) for the d_gh inode unless
- * @is_root is true.
+ * This can be called via the VFS filldir function when NFS is doing
+ * a readdirplus and the inode which its intending to stat isn't
+ * already in cache. In this case we must not take the directory glock
+ * again, since the readdir call will have already taken that lock.
*
* Returns: errno
*/
struct gfs2_holder d_gh;
struct gfs2_inum_host inum;
unsigned int type;
- int error = 0;
+ int error;
struct inode *inode = NULL;
+ int unlock = 0;
if (!name->len || name->len > GFS2_FNAMESIZE)
return ERR_PTR(-ENAMETOOLONG);
return dir;
}
- error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED, 0, &d_gh);
- if (error)
- return ERR_PTR(error);
+ if (gfs2_glock_is_locked_by_me(dip->i_gl) == 0) {
+ error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED, 0, &d_gh);
+ if (error)
+ return ERR_PTR(error);
+ unlock = 1;
+ }
if (!is_root) {
error = permission(dir, MAY_EXEC, NULL);
inode = gfs2_inode_lookup(sb, &inum, type);
out:
- gfs2_glock_dq_uninit(&d_gh);
+ if (unlock)
+ gfs2_glock_dq_uninit(&d_gh);
if (error == -ENOENT)
return NULL;
- return inode;
+ return inode ? inode : ERR_PTR(error);
}
static int pick_formal_ino_1(struct gfs2_sbd *sdp, u64 *formal_ino)
vprintk(fmt, args);
va_end(args);
- fs_err(sdp, "about to withdraw from the cluster\n");
+ fs_err(sdp, "about to withdraw this file system\n");
BUG_ON(sdp->sd_args.ar_debug);
-
- fs_err(sdp, "waiting for outstanding I/O\n");
-
- /* FIXME: suspend dm device so oustanding bio's complete
- and all further io requests fail */
-
fs_err(sdp, "telling LM to withdraw\n");
gfs2_withdraw_lockproto(&sdp->sd_lockstruct);
fs_err(sdp, "withdrawn\n");
#define GDLM_STRNAME_BYTES 24
#define GDLM_LVB_SIZE 32
-#define GDLM_DROP_COUNT 50000
+#define GDLM_DROP_COUNT 200000
#define GDLM_DROP_PERIOD 60
#define GDLM_NAME_LEN 128
#include "lock_dlm.h"
-extern int gdlm_drop_count;
-extern int gdlm_drop_period;
-
extern struct lm_lockops gdlm_ops;
static int __init init_lock_dlm(void)
return error;
}
- gdlm_drop_count = GDLM_DROP_COUNT;
- gdlm_drop_period = GDLM_DROP_PERIOD;
-
printk(KERN_INFO
"Lock_DLM (built %s %s) installed\n", __DATE__, __TIME__);
return 0;
#include "lock_dlm.h"
-int gdlm_drop_count;
-int gdlm_drop_period;
const struct lm_lockops gdlm_ops;
if (!ls)
return NULL;
- ls->drop_locks_count = gdlm_drop_count;
- ls->drop_locks_period = gdlm_drop_period;
+ ls->drop_locks_count = GDLM_DROP_COUNT;
+ ls->drop_locks_period = GDLM_DROP_PERIOD;
ls->fscb = cb;
ls->sdp = sdp;
ls->fsflags = flags;
return sprintf(buf, "%d\n", ls->recover_jid_status);
}
+static ssize_t drop_count_show(struct gdlm_ls *ls, char *buf)
+{
+ return sprintf(buf, "%d\n", ls->drop_locks_count);
+}
+
+static ssize_t drop_count_store(struct gdlm_ls *ls, const char *buf, size_t len)
+{
+ ls->drop_locks_count = simple_strtol(buf, NULL, 0);
+ return len;
+}
+
struct gdlm_attr {
struct attribute attr;
ssize_t (*show)(struct gdlm_ls *, char *);
GDLM_ATTR(recover, 0644, recover_show, recover_store);
GDLM_ATTR(recover_done, 0444, recover_done_show, NULL);
GDLM_ATTR(recover_status, 0444, recover_status_show, NULL);
+GDLM_ATTR(drop_count, 0644, drop_count_show, drop_count_store);
static struct attribute *gdlm_attrs[] = {
&gdlm_attr_proto_name.attr,
&gdlm_attr_recover.attr,
&gdlm_attr_recover_done.attr,
&gdlm_attr_recover_status.attr,
+ &gdlm_attr_drop_count.attr,
NULL,
};
struct gfs2_bufdata *bd = container_of(le, struct gfs2_bufdata, bd_le);
struct gfs2_trans *tr;
- if (!list_empty(&bd->bd_list_tr))
+ gfs2_log_lock(sdp);
+ if (!list_empty(&bd->bd_list_tr)) {
+ gfs2_log_unlock(sdp);
return;
-
+ }
tr = current->journal_info;
tr->tr_touched = 1;
tr->tr_num_buf++;
list_add(&bd->bd_list_tr, &tr->tr_list_buf);
+ gfs2_log_unlock(sdp);
if (!list_empty(&le->le_list))
return;
gfs2_meta_check(sdp, bd->bd_bh);
gfs2_pin(sdp, bd->bd_bh);
-
gfs2_log_lock(sdp);
sdp->sd_log_num_buf++;
list_add(&le->le_list, &sdp->sd_log_le_buf);
struct list_head *head = &tr->tr_list_buf;
struct gfs2_bufdata *bd;
+ gfs2_log_lock(sdp);
while (!list_empty(head)) {
bd = list_entry(head->next, struct gfs2_bufdata, bd_list_tr);
list_del_init(&bd->bd_list_tr);
tr->tr_num_buf--;
}
+ gfs2_log_unlock(sdp);
gfs2_assert_warn(sdp, !tr->tr_num_buf);
}
struct address_space *mapping = bd->bd_bh->b_page->mapping;
struct gfs2_inode *ip = GFS2_I(mapping->host);
+ gfs2_log_lock(sdp);
tr->tr_touched = 1;
if (list_empty(&bd->bd_list_tr) &&
(ip->i_di.di_flags & GFS2_DIF_JDATA)) {
tr->tr_num_buf++;
list_add(&bd->bd_list_tr, &tr->tr_list_buf);
+ gfs2_log_unlock(sdp);
gfs2_pin(sdp, bd->bd_bh);
tr->tr_num_buf_new++;
+ } else {
+ gfs2_log_unlock(sdp);
}
gfs2_trans_add_gl(bd->bd_gl);
gfs2_log_lock(sdp);
#include <linux/pagevec.h>
#include <linux/mpage.h>
#include <linux/fs.h>
+#include <linux/writeback.h>
#include <linux/gfs2_ondisk.h>
#include <linux/lm_interface.h>
return 0;
}
+/**
+ * gfs2_writepages - Write a bunch of dirty pages back to disk
+ * @mapping: The mapping to write
+ * @wbc: Write-back control
+ *
+ * For journaled files and/or ordered writes this just falls back to the
+ * kernel's default writepages path for now. We will probably want to change
+ * that eventually (i.e. when we look at allocate on flush).
+ *
+ * For the data=writeback case though we can already ignore buffer heads
+ * and write whole extents at once. This is a big reduction in the
+ * number of I/O requests we send and the bmap calls we make in this case.
+ */
+static int gfs2_writepages(struct address_space *mapping,
+ struct writeback_control *wbc)
+{
+ struct inode *inode = mapping->host;
+ struct gfs2_inode *ip = GFS2_I(inode);
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
+
+ if (sdp->sd_args.ar_data == GFS2_DATA_WRITEBACK && !gfs2_is_jdata(ip))
+ return mpage_writepages(mapping, wbc, gfs2_get_block_noalloc);
+
+ return generic_writepages(mapping, wbc);
+}
+
/**
* stuffed_readpage - Fill in a Linux page with stuffed file data
* @ip: the inode
* the page lock and the glock) and return having done no I/O. Its
* obviously not something we'd want to do on too regular a basis.
* Any I/O we ignore at this time will be done via readpage later.
- * 2. We have to handle stuffed files here too.
+ * 2. We don't handle stuffed files here we let readpage do the honours.
* 3. mpage_readpages() does most of the heavy lifting in the common case.
* 4. gfs2_get_block() is relied upon to set BH_Boundary in the right places.
* 5. We use LM_FLAG_TRY_1CB here, effectively we then have lock-ahead as
struct gfs2_inode *ip = GFS2_I(inode);
struct gfs2_sbd *sdp = GFS2_SB(inode);
struct gfs2_holder gh;
- unsigned page_idx;
- int ret;
+ int ret = 0;
int do_unlock = 0;
if (likely(file != &gfs2_internal_file_sentinel)) {
goto out_unlock;
}
skip_lock:
- if (gfs2_is_stuffed(ip)) {
- struct pagevec lru_pvec;
- pagevec_init(&lru_pvec, 0);
- for (page_idx = 0; page_idx < nr_pages; page_idx++) {
- struct page *page = list_entry(pages->prev, struct page, lru);
- prefetchw(&page->flags);
- list_del(&page->lru);
- if (!add_to_page_cache(page, mapping,
- page->index, GFP_KERNEL)) {
- ret = stuffed_readpage(ip, page);
- unlock_page(page);
- if (!pagevec_add(&lru_pvec, page))
- __pagevec_lru_add(&lru_pvec);
- } else {
- page_cache_release(page);
- }
- }
- pagevec_lru_add(&lru_pvec);
- ret = 0;
- } else {
- /* What we really want to do .... */
+ if (!gfs2_is_stuffed(ip))
ret = mpage_readpages(mapping, pages, nr_pages, gfs2_get_block);
- }
if (do_unlock) {
gfs2_glock_dq_m(1, &gh);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, GL_ATIME|LM_FLAG_TRY_1CB, &ip->i_gh);
error = gfs2_glock_nq_atime(&ip->i_gh);
if (unlikely(error)) {
- if (error == GLR_TRYFAILED)
+ if (error == GLR_TRYFAILED) {
+ unlock_page(page);
error = AOP_TRUNCATED_PAGE;
+ }
goto out_uninit;
}
return;
}
+/**
+ * gfs2_ok_for_dio - check that dio is valid on this file
+ * @ip: The inode
+ * @rw: READ or WRITE
+ * @offset: The offset at which we are reading or writing
+ *
+ * Returns: 0 (to ignore the i/o request and thus fall back to buffered i/o)
+ * 1 (to accept the i/o request)
+ */
+static int gfs2_ok_for_dio(struct gfs2_inode *ip, int rw, loff_t offset)
+{
+ /*
+ * Should we return an error here? I can't see that O_DIRECT for
+ * a journaled file makes any sense. For now we'll silently fall
+ * back to buffered I/O, likewise we do the same for stuffed
+ * files since they are (a) small and (b) unaligned.
+ */
+ if (gfs2_is_jdata(ip))
+ return 0;
+
+ if (gfs2_is_stuffed(ip))
+ return 0;
+
+ if (offset > i_size_read(&ip->i_inode))
+ return 0;
+ return 1;
+}
+
+
+
static ssize_t gfs2_direct_IO(int rw, struct kiocb *iocb,
const struct iovec *iov, loff_t offset,
unsigned long nr_segs)
struct gfs2_holder gh;
int rv;
- if (rw == READ)
- mutex_lock(&inode->i_mutex);
/*
- * Shared lock, even if its a write, since we do no allocation
- * on this path. All we need change is atime.
+ * Deferred lock, even if its a write, since we do no allocation
+ * on this path. All we need change is atime, and this lock mode
+ * ensures that other nodes have flushed their buffered read caches
+ * (i.e. their page cache entries for this inode). We do not,
+ * unfortunately have the option of only flushing a range like
+ * the VFS does.
*/
- gfs2_holder_init(ip->i_gl, LM_ST_SHARED, GL_ATIME, &gh);
+ gfs2_holder_init(ip->i_gl, LM_ST_DEFERRED, GL_ATIME, &gh);
rv = gfs2_glock_nq_atime(&gh);
if (rv)
- goto out;
-
- if (offset > i_size_read(inode))
- goto out;
-
- /*
- * Should we return an error here? I can't see that O_DIRECT for
- * a journaled file makes any sense. For now we'll silently fall
- * back to buffered I/O, likewise we do the same for stuffed
- * files since they are (a) small and (b) unaligned.
- */
- if (gfs2_is_jdata(ip))
- goto out;
-
- if (gfs2_is_stuffed(ip))
- goto out;
-
- rv = blockdev_direct_IO_own_locking(rw, iocb, inode,
- inode->i_sb->s_bdev,
- iov, offset, nr_segs,
- gfs2_get_block_direct, NULL);
+ return rv;
+ rv = gfs2_ok_for_dio(ip, rw, offset);
+ if (rv != 1)
+ goto out; /* dio not valid, fall back to buffered i/o */
+
+ rv = blockdev_direct_IO_no_locking(rw, iocb, inode, inode->i_sb->s_bdev,
+ iov, offset, nr_segs,
+ gfs2_get_block_direct, NULL);
out:
gfs2_glock_dq_m(1, &gh);
gfs2_holder_uninit(&gh);
- if (rw == READ)
- mutex_unlock(&inode->i_mutex);
-
return rv;
}
const struct address_space_operations gfs2_file_aops = {
.writepage = gfs2_writepage,
+ .writepages = gfs2_writepages,
.readpage = gfs2_readpage,
.readpages = gfs2_readpages,
.sync_page = block_sync_page,
struct gfs2_inum_host inum;
unsigned int type;
int error;
+ int had_lock=0;
if (inode && is_bad_inode(inode))
goto invalid;
if (sdp->sd_args.ar_localcaching)
goto valid;
- error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED, 0, &d_gh);
- if (error)
- goto fail;
+ had_lock = gfs2_glock_is_locked_by_me(dip->i_gl);
+ if (!had_lock) {
+ error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED, 0, &d_gh);
+ if (error)
+ goto fail;
+ }
error = gfs2_dir_search(parent->d_inode, &dentry->d_name, &inum, &type);
switch (error) {
}
valid_gunlock:
- gfs2_glock_dq_uninit(&d_gh);
+ if (!had_lock)
+ gfs2_glock_dq_uninit(&d_gh);
valid:
dput(parent);
return 1;
invalid_gunlock:
- gfs2_glock_dq_uninit(&d_gh);
+ if (!had_lock)
+ gfs2_glock_dq_uninit(&d_gh);
invalid:
if (inode && S_ISDIR(inode->i_mode)) {
if (have_submounts(dentry))
#include "glock.h"
#include "glops.h"
#include "inode.h"
+#include "ops_dentry.h"
#include "ops_export.h"
#include "rgrp.h"
#include "util.h"
char *name;
};
-static int get_name_filldir(void *opaque, const char *name, unsigned int length,
- u64 offset, struct gfs2_inum_host *inum,
- unsigned int type)
+static int get_name_filldir(void *opaque, const char *name, int length,
+ loff_t offset, u64 inum, unsigned int type)
{
- struct get_name_filldir *gnfd = (struct get_name_filldir *)opaque;
+ struct get_name_filldir *gnfd = opaque;
- if (!gfs2_inum_equal(inum, &gnfd->inum))
+ if (inum != gnfd->inum.no_addr)
return 0;
memcpy(gnfd->name, name, length);
return ERR_PTR(-ENOMEM);
}
+ dentry->d_op = &gfs2_dops;
return dentry;
}
}
error = gfs2_glock_nq_num(sdp, inum->no_addr, &gfs2_inode_glops,
- LM_ST_SHARED, LM_FLAG_ANY | GL_LOCAL_EXCL,
- &i_gh);
+ LM_ST_SHARED, LM_FLAG_ANY, &i_gh);
if (error)
return ERR_PTR(error);
return ERR_PTR(-ENOMEM);
}
+ dentry->d_op = &gfs2_dops;
return dentry;
fail_rgd:
#include "util.h"
#include "eaops.h"
-/* For regular, non-NFS */
-struct filldir_reg {
- struct gfs2_sbd *fdr_sbd;
- int fdr_prefetch;
-
- filldir_t fdr_filldir;
- void *fdr_opaque;
-};
-
/*
* Most fields left uninitialised to catch anybody who tries to
* use them. f_flags set to prevent file_accessed() from touching
return error;
}
-/**
- * filldir_func - Report a directory entry to the caller of gfs2_dir_read()
- * @opaque: opaque data used by the function
- * @name: the name of the directory entry
- * @length: the length of the name
- * @offset: the entry's offset in the directory
- * @inum: the inode number the entry points to
- * @type: the type of inode the entry points to
- *
- * Returns: 0 on success, 1 if buffer full
- */
-
-static int filldir_func(void *opaque, const char *name, unsigned int length,
- u64 offset, struct gfs2_inum_host *inum,
- unsigned int type)
-{
- struct filldir_reg *fdr = (struct filldir_reg *)opaque;
- struct gfs2_sbd *sdp = fdr->fdr_sbd;
- int error;
-
- error = fdr->fdr_filldir(fdr->fdr_opaque, name, length, offset,
- inum->no_addr, type);
- if (error)
- return 1;
-
- if (fdr->fdr_prefetch && !(length == 1 && *name == '.')) {
- gfs2_glock_prefetch_num(sdp, inum->no_addr, &gfs2_inode_glops,
- LM_ST_SHARED, LM_FLAG_TRY | LM_FLAG_ANY);
- gfs2_glock_prefetch_num(sdp, inum->no_addr, &gfs2_iopen_glops,
- LM_ST_SHARED, LM_FLAG_TRY);
- }
-
- return 0;
-}
-
/**
* gfs2_readdir - Read directory entries from a directory
* @file: The directory to read from
{
struct inode *dir = file->f_mapping->host;
struct gfs2_inode *dip = GFS2_I(dir);
- struct filldir_reg fdr;
struct gfs2_holder d_gh;
u64 offset = file->f_pos;
int error;
- fdr.fdr_sbd = GFS2_SB(dir);
- fdr.fdr_prefetch = 1;
- fdr.fdr_filldir = filldir;
- fdr.fdr_opaque = dirent;
-
gfs2_holder_init(dip->i_gl, LM_ST_SHARED, GL_ATIME, &d_gh);
error = gfs2_glock_nq_atime(&d_gh);
if (error) {
return error;
}
- error = gfs2_dir_read(dir, &offset, &fdr, filldir_func);
+ error = gfs2_dir_read(dir, &offset, dirent, filldir);
gfs2_glock_dq_uninit(&d_gh);
struct gfs2_inode *dip = GFS2_I(dir);
struct gfs2_sbd *sdp = GFS2_SB(dir);
struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_holder ghs[2];
+ struct gfs2_holder ghs[3];
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_holder ri_gh;
int error;
+ error = gfs2_rindex_hold(sdp, &ri_gh);
+ if (error)
+ return error;
+
gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
- gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
+ gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
- error = gfs2_glock_nq_m(2, ghs);
+ rgd = gfs2_blk2rgrpd(sdp, ip->i_num.no_addr);
+ gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
+
+
+ error = gfs2_glock_nq_m(3, ghs);
if (error)
goto out;
out_end_trans:
gfs2_trans_end(sdp);
out_gunlock:
- gfs2_glock_dq_m(2, ghs);
+ gfs2_glock_dq_m(3, ghs);
out:
gfs2_holder_uninit(ghs);
gfs2_holder_uninit(ghs + 1);
+ gfs2_holder_uninit(ghs + 2);
+ gfs2_glock_dq_uninit(&ri_gh);
return error;
}
struct gfs2_inode *dip = GFS2_I(dir);
struct gfs2_sbd *sdp = GFS2_SB(dir);
struct gfs2_inode *ip = GFS2_I(dentry->d_inode);
- struct gfs2_holder ghs[2];
+ struct gfs2_holder ghs[3];
+ struct gfs2_rgrpd *rgd;
+ struct gfs2_holder ri_gh;
int error;
+
+ error = gfs2_rindex_hold(sdp, &ri_gh);
+ if (error)
+ return error;
gfs2_holder_init(dip->i_gl, LM_ST_EXCLUSIVE, 0, ghs);
gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + 1);
- error = gfs2_glock_nq_m(2, ghs);
+ rgd = gfs2_blk2rgrpd(sdp, ip->i_num.no_addr);
+ gfs2_holder_init(rgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + 2);
+
+ error = gfs2_glock_nq_m(3, ghs);
if (error)
goto out;
gfs2_trans_end(sdp);
out_gunlock:
- gfs2_glock_dq_m(2, ghs);
+ gfs2_glock_dq_m(3, ghs);
out:
gfs2_holder_uninit(ghs);
gfs2_holder_uninit(ghs + 1);
+ gfs2_holder_uninit(ghs + 2);
+ gfs2_glock_dq_uninit(&ri_gh);
return error;
}
struct gfs2_inode *ip = GFS2_I(odentry->d_inode);
struct gfs2_inode *nip = NULL;
struct gfs2_sbd *sdp = GFS2_SB(odir);
- struct gfs2_holder ghs[4], r_gh;
+ struct gfs2_holder ghs[5], r_gh;
+ struct gfs2_rgrpd *nrgd;
unsigned int num_gh;
int dir_rename = 0;
int alloc_required;
if (nip) {
gfs2_holder_init(nip->i_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh);
num_gh++;
+ /* grab the resource lock for unlink flag twiddling
+ * this is the case of the target file already existing
+ * so we unlink before doing the rename
+ */
+ nrgd = gfs2_blk2rgrpd(sdp, nip->i_num.no_addr);
+ if (nrgd)
+ gfs2_holder_init(nrgd->rd_gl, LM_ST_EXCLUSIVE, 0, ghs + num_gh++);
}
error = gfs2_glock_nq_m(num_gh, ghs);
error = gfs2_trans_begin(sdp, sdp->sd_max_dirres +
al->al_rgd->rd_ri.ri_length +
4 * RES_DINODE + 4 * RES_LEAF +
- RES_STATFS + RES_QUOTA, 0);
+ RES_STATFS + RES_QUOTA + 4, 0);
if (error)
goto out_ipreserv;
} else {
error = gfs2_trans_begin(sdp, 4 * RES_DINODE +
- 5 * RES_LEAF, 0);
+ 5 * RES_LEAF + 4, 0);
if (error)
goto out_gunlock;
}
error = gfs2_meta_inode_buffer(ip, &dibh);
if (error)
goto out_end_trans;
- ip->i_inode.i_ctime.tv_sec = get_seconds();
+ ip->i_inode.i_ctime = CURRENT_TIME_SEC;
gfs2_trans_add_bh(ip->i_gl, dibh, 1);
gfs2_dinode_out(ip, dibh->b_data);
brelse(dibh);
}
generic_fillattr(inode, stat);
- if (unlock);
+ if (unlock)
gfs2_glock_dq_uninit(&gh);
return 0;
struct gfs2_sbd *sdp = sb->s_fs_info;
int error;
+ if (test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
+ return;
+
for (;;) {
error = gfs2_freeze_fs(sdp);
if (!error)
}
error = gfs2_dinode_dealloc(ip);
+ /*
+ * Must do this before unlock to avoid trying to write back
+ * potentially dirty data now that inode no longer exists
+ * on disk.
+ */
+ truncate_inode_pages(&inode->i_data, 0);
out_unlock:
gfs2_glock_dq(&ip->i_iopen_gh);
static struct inode *gfs2_alloc_inode(struct super_block *sb)
{
- struct gfs2_sbd *sdp = sb->s_fs_info;
struct gfs2_inode *ip;
ip = kmem_cache_alloc(gfs2_inode_cachep, GFP_KERNEL);
if (ip) {
ip->i_flags = 0;
ip->i_gl = NULL;
- ip->i_greedy = gfs2_tune_get(sdp, gt_greedy_default);
ip->i_last_pfault = jiffies;
}
return &ip->i_inode;
#include "trans.h"
#include "util.h"
-static void pfault_be_greedy(struct gfs2_inode *ip)
-{
- unsigned int time;
-
- spin_lock(&ip->i_spin);
- time = ip->i_greedy;
- ip->i_last_pfault = jiffies;
- spin_unlock(&ip->i_spin);
-
- igrab(&ip->i_inode);
- if (gfs2_glock_be_greedy(ip->i_gl, time))
- iput(&ip->i_inode);
-}
-
static struct page *gfs2_private_nopage(struct vm_area_struct *area,
unsigned long address, int *type)
{
struct gfs2_inode *ip = GFS2_I(area->vm_file->f_mapping->host);
- struct page *result;
set_bit(GIF_PAGED, &ip->i_flags);
-
- result = filemap_nopage(area, address, type);
-
- if (result && result != NOPAGE_OOM)
- pfault_be_greedy(ip);
-
- return result;
+ return filemap_nopage(area, address, type);
}
static int alloc_page_backing(struct gfs2_inode *ip, struct page *page)
set_page_dirty(result);
}
- pfault_be_greedy(ip);
out:
gfs2_glock_dq_uninit(&i_gh);
gt->gt_atime_quantum = 3600;
gt->gt_new_files_jdata = 0;
gt->gt_new_files_directio = 0;
- gt->gt_max_atomic_write = 4 << 20;
gt->gt_max_readahead = 1 << 18;
gt->gt_lockdump_size = 131072;
gt->gt_stall_secs = 600;
gt->gt_complain_secs = 10;
gt->gt_reclaim_limit = 5000;
gt->gt_entries_per_readdir = 32;
- gt->gt_prefetch_secs = 10;
- gt->gt_greedy_default = HZ / 10;
- gt->gt_greedy_quantum = HZ / 40;
- gt->gt_greedy_max = HZ / 4;
gt->gt_statfs_quantum = 30;
gt->gt_statfs_slow = 0;
}
mutex_lock(&sdp->sd_jindex_mutex);
for (;;) {
- error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED,
- GL_LOCAL_EXCL, ji_gh);
+ error = gfs2_glock_nq_init(dip->i_gl, LM_ST_SHARED, 0, ji_gh);
if (error)
break;
struct gfs2_log_header_host head;
int error;
- error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED,
- GL_LOCAL_EXCL, &t_gh);
+ error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, 0, &t_gh);
if (error)
return error;
gfs2_quota_sync(sdp);
gfs2_statfs_sync(sdp);
- error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED,
- GL_LOCAL_EXCL | GL_NOCACHE,
- &t_gh);
+ error = gfs2_glock_nq_init(sdp->sd_trans_gl, LM_ST_SHARED, GL_NOCACHE,
+ &t_gh);
if (error && !test_bit(SDF_SHUTDOWN, &sdp->sd_flags))
return error;
TUNE_ATTR(max_readahead, 0);
TUNE_ATTR(complain_secs, 0);
TUNE_ATTR(reclaim_limit, 0);
-TUNE_ATTR(prefetch_secs, 0);
TUNE_ATTR(statfs_slow, 0);
TUNE_ATTR(new_files_jdata, 0);
TUNE_ATTR(new_files_directio, 0);
TUNE_ATTR(quota_simul_sync, 1);
TUNE_ATTR(quota_cache_secs, 1);
-TUNE_ATTR(max_atomic_write, 1);
TUNE_ATTR(stall_secs, 1);
-TUNE_ATTR(greedy_default, 1);
-TUNE_ATTR(greedy_quantum, 1);
-TUNE_ATTR(greedy_max, 1);
TUNE_ATTR(statfs_quantum, 1);
TUNE_ATTR_DAEMON(scand_secs, scand_process);
TUNE_ATTR_DAEMON(recoverd_secs, recoverd_process);
&tune_attr_max_readahead.attr,
&tune_attr_complain_secs.attr,
&tune_attr_reclaim_limit.attr,
- &tune_attr_prefetch_secs.attr,
&tune_attr_statfs_slow.attr,
&tune_attr_quota_simul_sync.attr,
&tune_attr_quota_cache_secs.attr,
- &tune_attr_max_atomic_write.attr,
&tune_attr_stall_secs.attr,
- &tune_attr_greedy_default.attr,
- &tune_attr_greedy_quantum.attr,
- &tune_attr_greedy_max.attr,
&tune_attr_statfs_quantum.attr,
&tune_attr_scand_secs.attr,
&tune_attr_recoverd_secs.attr,
* Take appropriate lock on inode
*/
if (create)
- IWRITE_LOCK(ip);
+ IWRITE_LOCK(ip, RDWRLOCK_NORMAL);
else
- IREAD_LOCK(ip);
+ IREAD_LOCK(ip, RDWRLOCK_NORMAL);
if (((lblock64 << ip->i_sb->s_blocksize_bits) < ip->i_size) &&
(!xtLookup(ip, lblock64, xlen, &xflag, &xaddr, &xlen, 0)) &&
nobh_truncate_page(ip->i_mapping, ip->i_size);
- IWRITE_LOCK(ip);
+ IWRITE_LOCK(ip, RDWRLOCK_NORMAL);
jfs_truncate_nolock(ip, ip->i_size);
IWRITE_UNLOCK(ip);
}
/*
* assert with traditional printf/panic
*/
-#ifdef CONFIG_KERNEL_ASSERTS
-/* kgdb stuff */
-#define assert(p) KERNEL_ASSERT(#p, p)
-#else
#define assert(p) do { \
if (!(p)) { \
printk(KERN_CRIT "BUG at %s:%d assert(%s)\n", \
BUG(); \
} \
} while (0)
-#endif
/*
* debug ON
struct inode *ipbmap = JFS_SBI(ip->i_sb)->ipbmap;
struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap;
- IREAD_LOCK(ipbmap);
+ IREAD_LOCK(ipbmap, RDWRLOCK_DMAP);
/* block to be freed better be within the mapsize. */
if (unlikely((blkno == 0) || (blkno + nblocks > bmp->db_mapsize))) {
* allocation group size, try to allocate anywhere.
*/
if (l2nb > bmp->db_agl2size) {
- IWRITE_LOCK(ipbmap);
+ IWRITE_LOCK(ipbmap, RDWRLOCK_DMAP);
rc = dbAllocAny(bmp, nblocks, l2nb, results);
* the hint using a tiered strategy.
*/
if (nblocks <= BPERDMAP) {
- IREAD_LOCK(ipbmap);
+ IREAD_LOCK(ipbmap, RDWRLOCK_DMAP);
/* get the buffer for the dmap containing the hint.
*/
/* try to satisfy the allocation request with blocks within
* the same allocation group as the hint.
*/
- IWRITE_LOCK(ipbmap);
+ IWRITE_LOCK(ipbmap, RDWRLOCK_DMAP);
if ((rc = dbAllocAG(bmp, agno, nblocks, l2nb, results)) != -ENOSPC)
goto write_unlock;
* Let dbNextAG recommend a preferred allocation group
*/
agno = dbNextAG(ipbmap);
- IWRITE_LOCK(ipbmap);
+ IWRITE_LOCK(ipbmap, RDWRLOCK_DMAP);
/* Try to allocate within this allocation group. if that fails, try to
* allocate anywhere in the map.
s64 lblkno;
struct metapage *mp;
- IREAD_LOCK(ipbmap);
+ IREAD_LOCK(ipbmap, RDWRLOCK_DMAP);
/*
* validate extent request:
*/
extblkno = lastblkno + 1;
- IREAD_LOCK(ipbmap);
+ IREAD_LOCK(ipbmap, RDWRLOCK_DMAP);
/* better be within the file system */
bmp = sbi->bmap;
struct inode *ipbmap = JFS_SBI(ip->i_sb)->ipbmap;
struct bmap *bmp = JFS_SBI(ip->i_sb)->bmap;
- IREAD_LOCK(ipbmap);
+ IREAD_LOCK(ipbmap, RDWRLOCK_DMAP);
/* block to be allocated better be within the mapsize. */
ASSERT(nblocks <= bmp->db_mapsize - blkno);
/* read the iag */
imap = JFS_IP(ipimap)->i_imap;
- IREAD_LOCK(ipimap);
+ IREAD_LOCK(ipimap, RDWRLOCK_IMAP);
rc = diIAGRead(imap, iagno, &mp);
IREAD_UNLOCK(ipimap);
if (rc) {
/* Obtain read lock in imap inode. Don't release it until we have
* read all of the IAG's that we are going to.
*/
- IREAD_LOCK(ipimap);
+ IREAD_LOCK(ipimap, RDWRLOCK_IMAP);
/* read the iag.
*/
AG_LOCK(imap, agno);
/* Get read lock on imap inode */
- IREAD_LOCK(ipimap);
+ IREAD_LOCK(ipimap, RDWRLOCK_IMAP);
/* get the iag number and read the iag */
iagno = INOTOIAG(inum);
return -ENOSPC;
/* obtain read lock on imap inode */
- IREAD_LOCK(imap->im_ipimap);
+ IREAD_LOCK(imap->im_ipimap, RDWRLOCK_IMAP);
/* read the iag at the head of the list.
*/
} else {
/* read the iag.
*/
- IREAD_LOCK(imap->im_ipimap);
+ IREAD_LOCK(imap->im_ipimap, RDWRLOCK_IMAP);
if ((rc = diIAGRead(imap, iagno, &mp))) {
IREAD_UNLOCK(imap->im_ipimap);
jfs_error(ip->i_sb, "diAllocExt: error reading iag");
*/
/* acquire inode map lock */
- IWRITE_LOCK(ipimap);
+ IWRITE_LOCK(ipimap, RDWRLOCK_IMAP);
if (ipimap->i_size >> L2PSIZE != imap->im_nextiag + 1) {
IWRITE_UNLOCK(ipimap);
}
/* obtain read lock on map */
- IREAD_LOCK(ipimap);
+ IREAD_LOCK(ipimap, RDWRLOCK_IMAP);
/* read the iag */
if ((rc = diIAGRead(imap, iagno, &mp))) {
return -EIO;
}
/* read the iag */
- IREAD_LOCK(ipimap);
+ IREAD_LOCK(ipimap, RDWRLOCK_IMAP);
rc = diIAGRead(imap, iagno, &mp);
IREAD_UNLOCK(ipimap);
if (rc)
#define JFS_ACL_NOT_CACHED ((void *)-1)
-#define IREAD_LOCK(ip) down_read(&JFS_IP(ip)->rdwrlock)
+#define IREAD_LOCK(ip, subclass) \
+ down_read_nested(&JFS_IP(ip)->rdwrlock, subclass)
#define IREAD_UNLOCK(ip) up_read(&JFS_IP(ip)->rdwrlock)
-#define IWRITE_LOCK(ip) down_write(&JFS_IP(ip)->rdwrlock)
+#define IWRITE_LOCK(ip, subclass) \
+ down_write_nested(&JFS_IP(ip)->rdwrlock, subclass)
#define IWRITE_UNLOCK(ip) up_write(&JFS_IP(ip)->rdwrlock)
/*
COMMIT_Synclist, /* metadata pages on group commit synclist */
};
+/*
+ * commit_mutex nesting subclasses:
+ */
+enum commit_mutex_class
+{
+ COMMIT_MUTEX_PARENT,
+ COMMIT_MUTEX_CHILD,
+ COMMIT_MUTEX_SECOND_PARENT, /* Renaming */
+ COMMIT_MUTEX_VICTIM /* Inode being unlinked due to rename */
+};
+
+/*
+ * rdwrlock subclasses:
+ * The dmap inode may be locked while a normal inode or the imap inode are
+ * locked.
+ */
+enum rdwrlock_class
+{
+ RDWRLOCK_NORMAL,
+ RDWRLOCK_IMAP,
+ RDWRLOCK_DMAP
+};
+
#define set_cflag(flag, ip) set_bit(flag, &(JFS_IP(ip)->cflag))
#define clear_cflag(flag, ip) clear_bit(flag, &(JFS_IP(ip)->cflag))
#define test_cflag(flag, ip) test_bit(flag, &(JFS_IP(ip)->cflag))
if (cond) \
break; \
unlock_cmd; \
- schedule(); \
+ io_schedule(); \
lock_cmd; \
} \
current->state = TASK_RUNNING; \
set_current_state(TASK_UNINTERRUPTIBLE);
if (metapage_locked(mp)) {
unlock_page(mp->page);
- schedule();
+ io_schedule();
lock_page(mp->page);
}
} while (trylock_metapage(mp));
add_wait_queue(event, &wait);
set_current_state(TASK_UNINTERRUPTIBLE);
TXN_UNLOCK();
- schedule();
+ io_schedule();
current->state = TASK_RUNNING;
remove_wait_queue(event, &wait);
}
nsplit = 0;
/* push (bn, index) of the parent page/entry */
+ if (BT_STACK_FULL(btstack)) {
+ jfs_error(ip->i_sb, "stack overrun in xtSearch!");
+ XT_PUTPAGE(mp);
+ return -EIO;
+ }
BT_PUSH(btstack, bn, index);
/* get the child page block number */
*/
getChild:
/* save current parent entry for the child page */
+ if (BT_STACK_FULL(&btstack)) {
+ jfs_error(ip->i_sb, "stack overrun in xtTruncate!");
+ XT_PUTPAGE(mp);
+ return -EIO;
+ }
BT_PUSH(&btstack, bn, index);
/* get child page */
*/
getChild:
/* save current parent entry for the child page */
+ if (BT_STACK_FULL(&btstack)) {
+ jfs_error(ip->i_sb, "stack overrun in xtTruncate_pmap!");
+ XT_PUTPAGE(mp);
+ return -EIO;
+ }
BT_PUSH(&btstack, bn, index);
/* get child page */
tid = txBegin(dip->i_sb, 0);
- mutex_lock(&JFS_IP(dip)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dip)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
rc = jfs_init_acl(tid, ip, dip);
if (rc)
tid = txBegin(dip->i_sb, 0);
- mutex_lock(&JFS_IP(dip)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dip)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
rc = jfs_init_acl(tid, ip, dip);
if (rc)
tid = txBegin(dip->i_sb, 0);
- mutex_lock(&JFS_IP(dip)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dip)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
iplist[0] = dip;
iplist[1] = ip;
if ((rc = get_UCSname(&dname, dentry)))
goto out;
- IWRITE_LOCK(ip);
+ IWRITE_LOCK(ip, RDWRLOCK_NORMAL);
tid = txBegin(dip->i_sb, 0);
- mutex_lock(&JFS_IP(dip)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dip)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
iplist[0] = dip;
iplist[1] = ip;
tid = txBegin(ip->i_sb, 0);
- mutex_lock(&JFS_IP(dir)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dir)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
/*
* scan parent directory for entry/freespace
tid = txBegin(dip->i_sb, 0);
- mutex_lock(&JFS_IP(dip)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dip)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
rc = jfs_init_security(tid, ip, dip);
if (rc)
goto out3;
}
} else if (new_ip) {
- IWRITE_LOCK(new_ip);
+ IWRITE_LOCK(new_ip, RDWRLOCK_NORMAL);
/* Init inode for quota operations. */
DQUOT_INIT(new_ip);
}
*/
tid = txBegin(new_dir->i_sb, 0);
- mutex_lock(&JFS_IP(new_dir)->commit_mutex);
- mutex_lock(&JFS_IP(old_ip)->commit_mutex);
+ /*
+ * How do we know the locking is safe from deadlocks?
+ * The vfs does the hard part for us. Any time we are taking nested
+ * commit_mutexes, the vfs already has i_mutex held on the parent.
+ * Here, the vfs has already taken i_mutex on both old_dir and new_dir.
+ */
+ mutex_lock_nested(&JFS_IP(new_dir)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(old_ip)->commit_mutex, COMMIT_MUTEX_CHILD);
if (old_dir != new_dir)
- mutex_lock(&JFS_IP(old_dir)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(old_dir)->commit_mutex,
+ COMMIT_MUTEX_SECOND_PARENT);
if (new_ip) {
- mutex_lock(&JFS_IP(new_ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(new_ip)->commit_mutex,
+ COMMIT_MUTEX_VICTIM);
/*
* Change existing directory entry to new inode number
*/
tid = txBegin(dir->i_sb, 0);
- mutex_lock(&JFS_IP(dir)->commit_mutex);
- mutex_lock(&JFS_IP(ip)->commit_mutex);
+ mutex_lock_nested(&JFS_IP(dir)->commit_mutex, COMMIT_MUTEX_PARENT);
+ mutex_lock_nested(&JFS_IP(ip)->commit_mutex, COMMIT_MUTEX_CHILD);
rc = jfs_init_acl(tid, ip, dir);
if (rc)
* for the dinode, one for the new block. */
#define OCFS2_SIMPLE_DIR_EXTEND_CREDITS (2)
-/* file update (nlink, etc) + dir entry block */
-#define OCFS2_LINK_CREDITS (OCFS2_INODE_UPDATE_CREDITS + 1)
+/* file update (nlink, etc) + directory mtime/ctime + dir entry block */
+#define OCFS2_LINK_CREDITS (2*OCFS2_INODE_UPDATE_CREDITS + 1)
/* inode + dir inode (if we unlink a dir), + dir entry block + orphan
* dir inode link */
#include <linux/slab.h>
#include <asm/uaccess.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
Error:
module_put(attr->attr.owner);
Done:
- if (error && kobj)
+ if (error)
kobject_put(kobj);
return error;
}
struct bin_attribute * attr = to_bin_attr(file->f_path.dentry);
u8 * buffer = file->private_data;
- if (kobj)
- kobject_put(kobj);
+ kobject_put(kobj);
module_put(attr->attr.owner);
kfree(buffer);
return 0;
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/namei.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
DECLARE_RWSEM(sysfs_rename_sem);
/*
* Allocates a new sysfs_dirent and links it to the parent sysfs_dirent
*/
-static struct sysfs_dirent * sysfs_new_dirent(struct sysfs_dirent * parent_sd,
- void * element)
+static struct sysfs_dirent * __sysfs_new_dirent(void * element)
{
struct sysfs_dirent * sd;
atomic_set(&sd->s_count, 1);
atomic_set(&sd->s_event, 1);
INIT_LIST_HEAD(&sd->s_children);
- list_add(&sd->s_sibling, &parent_sd->s_children);
+ INIT_LIST_HEAD(&sd->s_sibling);
sd->s_element = element;
return sd;
}
+static void __sysfs_list_dirent(struct sysfs_dirent *parent_sd,
+ struct sysfs_dirent *sd)
+{
+ if (sd)
+ list_add(&sd->s_sibling, &parent_sd->s_children);
+}
+
+static struct sysfs_dirent * sysfs_new_dirent(struct sysfs_dirent *parent_sd,
+ void * element)
+{
+ struct sysfs_dirent *sd;
+ sd = __sysfs_new_dirent(element);
+ __sysfs_list_dirent(parent_sd, sd);
+ return sd;
+}
+
/*
*
* Return -EEXIST if there is already a sysfs element with the same name for
}
-int sysfs_make_dirent(struct sysfs_dirent * parent_sd, struct dentry * dentry,
- void * element, umode_t mode, int type)
+static struct sysfs_dirent *
+__sysfs_make_dirent(struct dentry *dentry, void *element, mode_t mode, int type)
{
struct sysfs_dirent * sd;
- sd = sysfs_new_dirent(parent_sd, element);
+ sd = __sysfs_new_dirent(element);
if (!sd)
- return -ENOMEM;
+ goto out;
sd->s_mode = mode;
sd->s_type = type;
dentry->d_op = &sysfs_dentry_ops;
}
- return 0;
+out:
+ return sd;
+}
+
+int sysfs_make_dirent(struct sysfs_dirent * parent_sd, struct dentry * dentry,
+ void * element, umode_t mode, int type)
+{
+ struct sysfs_dirent *sd;
+
+ sd = __sysfs_make_dirent(dentry, element, mode, type);
+ __sysfs_list_dirent(parent_sd, sd);
+
+ return sd ? 0 : -ENOMEM;
}
static int init_dir(struct inode * inode)
/**
* sysfs_create_dir - create a directory for an object.
- * @parent: parent parent object.
* @kobj: object we're creating directory for.
+ * @shadow_parent: parent parent object.
*/
-int sysfs_create_dir(struct kobject * kobj)
+int sysfs_create_dir(struct kobject * kobj, struct dentry *shadow_parent)
{
struct dentry * dentry = NULL;
struct dentry * parent;
BUG_ON(!kobj);
- if (kobj->parent)
+ if (shadow_parent)
+ parent = shadow_parent;
+ else if (kobj->parent)
parent = kobj->parent->dentry;
else if (sysfs_mount && sysfs_mount->mnt_sb)
parent = sysfs_mount->mnt_sb->s_root;
}
-/**
- * sysfs_remove_dir - remove an object's directory.
- * @kobj: object.
- *
- * The only thing special about this is that we remove any files in
- * the directory before we remove the directory, and we've inlined
- * what used to be sysfs_rmdir() below, instead of calling separately.
- */
-
-void sysfs_remove_dir(struct kobject * kobj)
+static void __sysfs_remove_dir(struct dentry *dentry)
{
- struct dentry * dentry = dget(kobj->dentry);
struct sysfs_dirent * parent_sd;
struct sysfs_dirent * sd, * tmp;
+ dget(dentry);
if (!dentry)
return;
* Drop reference from dget() on entrance.
*/
dput(dentry);
+}
+
+/**
+ * sysfs_remove_dir - remove an object's directory.
+ * @kobj: object.
+ *
+ * The only thing special about this is that we remove any files in
+ * the directory before we remove the directory, and we've inlined
+ * what used to be sysfs_rmdir() below, instead of calling separately.
+ */
+
+void sysfs_remove_dir(struct kobject * kobj)
+{
+ __sysfs_remove_dir(kobj->dentry);
kobj->dentry = NULL;
}
-int sysfs_rename_dir(struct kobject * kobj, const char *new_name)
+int sysfs_rename_dir(struct kobject * kobj, struct dentry *new_parent,
+ const char *new_name)
{
int error = 0;
- struct dentry * new_dentry, * parent;
-
- if (!strcmp(kobject_name(kobj), new_name))
- return -EINVAL;
+ struct dentry * new_dentry;
- if (!kobj->parent)
- return -EINVAL;
+ if (!new_parent)
+ return -EFAULT;
down_write(&sysfs_rename_sem);
- parent = kobj->parent->dentry;
-
- mutex_lock(&parent->d_inode->i_mutex);
+ mutex_lock(&new_parent->d_inode->i_mutex);
- new_dentry = lookup_one_len(new_name, parent, strlen(new_name));
+ new_dentry = lookup_one_len(new_name, new_parent, strlen(new_name));
if (!IS_ERR(new_dentry)) {
- if (!new_dentry->d_inode) {
+ /* By allowing two different directories with the
+ * same d_parent we allow this routine to move
+ * between different shadows of the same directory
+ */
+ if (kobj->dentry->d_parent->d_inode != new_parent->d_inode)
+ return -EINVAL;
+ else if (new_dentry->d_parent->d_inode != new_parent->d_inode)
+ error = -EINVAL;
+ else if (new_dentry == kobj->dentry)
+ error = -EINVAL;
+ else if (!new_dentry->d_inode) {
error = kobject_set_name(kobj, "%s", new_name);
if (!error) {
+ struct sysfs_dirent *sd, *parent_sd;
+
d_add(new_dentry, NULL);
d_move(kobj->dentry, new_dentry);
+
+ sd = kobj->dentry->d_fsdata;
+ parent_sd = new_parent->d_fsdata;
+
+ list_del_init(&sd->s_sibling);
+ list_add(&sd->s_sibling, &parent_sd->s_children);
}
else
d_drop(new_dentry);
error = -EEXIST;
dput(new_dentry);
}
- mutex_unlock(&parent->d_inode->i_mutex);
+ mutex_unlock(&new_parent->d_inode->i_mutex);
up_write(&sysfs_rename_sem);
return error;
struct sysfs_dirent *new_parent_sd, *sd;
int error;
- if (!new_parent)
- return -EINVAL;
-
old_parent_dentry = kobj->parent ?
kobj->parent->dentry : sysfs_mount->mnt_sb->s_root;
- new_parent_dentry = new_parent->dentry;
+ new_parent_dentry = new_parent ?
+ new_parent->dentry : sysfs_mount->mnt_sb->s_root;
again:
mutex_lock(&old_parent_dentry->d_inode->i_mutex);
return offset;
}
+
+/**
+ * sysfs_make_shadowed_dir - Setup so a directory can be shadowed
+ * @kobj: object we're creating shadow of.
+ */
+
+int sysfs_make_shadowed_dir(struct kobject *kobj,
+ void * (*follow_link)(struct dentry *, struct nameidata *))
+{
+ struct inode *inode;
+ struct inode_operations *i_op;
+
+ inode = kobj->dentry->d_inode;
+ if (inode->i_op != &sysfs_dir_inode_operations)
+ return -EINVAL;
+
+ i_op = kmalloc(sizeof(*i_op), GFP_KERNEL);
+ if (!i_op)
+ return -ENOMEM;
+
+ memcpy(i_op, &sysfs_dir_inode_operations, sizeof(*i_op));
+ i_op->follow_link = follow_link;
+
+ /* Locking of inode->i_op?
+ * Since setting i_op is a single word write and they
+ * are atomic we should be ok here.
+ */
+ inode->i_op = i_op;
+ return 0;
+}
+
+/**
+ * sysfs_create_shadow_dir - create a shadow directory for an object.
+ * @kobj: object we're creating directory for.
+ *
+ * sysfs_make_shadowed_dir must already have been called on this
+ * directory.
+ */
+
+struct dentry *sysfs_create_shadow_dir(struct kobject *kobj)
+{
+ struct sysfs_dirent *sd;
+ struct dentry *parent, *dir, *shadow;
+ struct inode *inode;
+
+ dir = kobj->dentry;
+ inode = dir->d_inode;
+ parent = dir->d_parent;
+ shadow = ERR_PTR(-EINVAL);
+ if (!sysfs_is_shadowed_inode(inode))
+ goto out;
+
+ shadow = d_alloc(parent, &dir->d_name);
+ if (!shadow)
+ goto nomem;
+
+ sd = __sysfs_make_dirent(shadow, kobj, inode->i_mode, SYSFS_DIR);
+ if (!sd)
+ goto nomem;
+
+ d_instantiate(shadow, igrab(inode));
+ inc_nlink(inode);
+ inc_nlink(parent->d_inode);
+ shadow->d_op = &sysfs_dentry_ops;
+
+ dget(shadow); /* Extra count - pin the dentry in core */
+
+out:
+ return shadow;
+nomem:
+ dput(shadow);
+ shadow = ERR_PTR(-ENOMEM);
+ goto out;
+}
+
+/**
+ * sysfs_remove_shadow_dir - remove an object's directory.
+ * @shadow: dentry of shadow directory
+ *
+ * The only thing special about this is that we remove any files in
+ * the directory before we remove the directory, and we've inlined
+ * what used to be sysfs_rmdir() below, instead of calling separately.
+ */
+
+void sysfs_remove_shadow_dir(struct dentry *shadow)
+{
+ __sysfs_remove_dir(shadow);
+}
+
const struct file_operations sysfs_dir_operations = {
.open = sysfs_dir_open,
.release = sysfs_dir_close,
#include <linux/kobject.h>
#include <linux/namei.h>
#include <linux/poll.h>
+#include <linux/list.h>
#include <asm/uaccess.h>
#include <asm/semaphore.h>
.store = subsys_attr_store,
};
+/**
+ * add_to_collection - add buffer to a collection
+ * @buffer: buffer to be added
+ * @node inode of set to add to
+ */
-struct sysfs_buffer {
- size_t count;
- loff_t pos;
- char * page;
- struct sysfs_ops * ops;
- struct semaphore sem;
- int needs_read_fill;
- int event;
-};
+static inline void
+add_to_collection(struct sysfs_buffer *buffer, struct inode *node)
+{
+ struct sysfs_buffer_collection *set = node->i_private;
+ mutex_lock(&node->i_mutex);
+ list_add(&buffer->associates, &set->associates);
+ mutex_unlock(&node->i_mutex);
+}
+
+static inline void
+remove_from_collection(struct sysfs_buffer *buffer, struct inode *node)
+{
+ mutex_lock(&node->i_mutex);
+ list_del(&buffer->associates);
+ mutex_unlock(&node->i_mutex);
+}
/**
* fill_read_buffer - allocate and fill buffer from object.
* Allocate @buffer->page, if it hasn't been already, then call the
* kobject's show() method to fill the buffer with this attribute's
* data.
- * This is called only once, on the file's first read.
+ * This is called only once, on the file's first read unless an error
+ * is returned.
*/
static int fill_read_buffer(struct dentry * dentry, struct sysfs_buffer * buffer)
{
buffer->event = atomic_read(&sd->s_event);
count = ops->show(kobj,attr,buffer->page);
- buffer->needs_read_fill = 0;
BUG_ON(count > (ssize_t)PAGE_SIZE);
- if (count >= 0)
+ if (count >= 0) {
+ buffer->needs_read_fill = 0;
buffer->count = count;
- else
+ } else {
ret = count;
+ }
return ret;
}
ssize_t retval = 0;
down(&buffer->sem);
+ if (buffer->orphaned) {
+ retval = -ENODEV;
+ goto out;
+ }
if (buffer->needs_read_fill) {
if ((retval = fill_read_buffer(file->f_path.dentry,buffer)))
goto out;
return retval;
}
-
/**
* fill_write_buffer - copy buffer from userspace.
* @buffer: data buffer for file.
ssize_t len;
down(&buffer->sem);
+ if (buffer->orphaned) {
+ len = -ENODEV;
+ goto out;
+ }
len = fill_write_buffer(buffer, buf, count);
if (len > 0)
len = flush_write_buffer(file->f_path.dentry, buffer, len);
if (len > 0)
*ppos += len;
+out:
up(&buffer->sem);
return len;
}
-static int check_perm(struct inode * inode, struct file * file)
+static int sysfs_open_file(struct inode *inode, struct file *file)
{
struct kobject *kobj = sysfs_get_kobject(file->f_path.dentry->d_parent);
struct attribute * attr = to_attr(file->f_path.dentry);
+ struct sysfs_buffer_collection *set;
struct sysfs_buffer * buffer;
struct sysfs_ops * ops = NULL;
int error = 0;
if (!ops)
goto Eaccess;
+ /* make sure we have a collection to add our buffers to */
+ mutex_lock(&inode->i_mutex);
+ if (!(set = inode->i_private)) {
+ if (!(set = inode->i_private = kmalloc(sizeof(struct sysfs_buffer_collection), GFP_KERNEL))) {
+ error = -ENOMEM;
+ goto Done;
+ } else {
+ INIT_LIST_HEAD(&set->associates);
+ }
+ }
+ mutex_unlock(&inode->i_mutex);
+
/* File needs write support.
* The inode's perms must say it's ok,
* and we must have a store method.
*/
buffer = kzalloc(sizeof(struct sysfs_buffer), GFP_KERNEL);
if (buffer) {
+ INIT_LIST_HEAD(&buffer->associates);
init_MUTEX(&buffer->sem);
buffer->needs_read_fill = 1;
buffer->ops = ops;
+ add_to_collection(buffer, inode);
file->private_data = buffer;
} else
error = -ENOMEM;
error = -EACCES;
module_put(attr->owner);
Done:
- if (error && kobj)
+ if (error)
kobject_put(kobj);
return error;
}
-static int sysfs_open_file(struct inode * inode, struct file * filp)
-{
- return check_perm(inode,filp);
-}
-
static int sysfs_release(struct inode * inode, struct file * filp)
{
struct kobject * kobj = to_kobj(filp->f_path.dentry->d_parent);
struct module * owner = attr->owner;
struct sysfs_buffer * buffer = filp->private_data;
- if (kobj)
- kobject_put(kobj);
+ if (buffer)
+ remove_from_collection(buffer, inode);
+ kobject_put(kobj);
/* After this point, attr should not be accessed. */
module_put(owner);
void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr)
{
- sysfs_hash_and_remove(kobj->dentry,attr->name);
+ sysfs_hash_and_remove(kobj->dentry, attr->name);
}
#include <linux/dcache.h>
#include <linux/namei.h>
#include <linux/err.h>
+#include <linux/fs.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
#include <linux/backing-dev.h>
#include <linux/capability.h>
#include <linux/errno.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
extern struct super_block * sysfs_sb;
.setattr = sysfs_setattr,
};
+void sysfs_delete_inode(struct inode *inode)
+{
+ /* Free the shadowed directory inode operations */
+ if (sysfs_is_shadowed_inode(inode)) {
+ kfree(inode->i_op);
+ inode->i_op = NULL;
+ }
+ return generic_delete_inode(inode);
+}
+
int sysfs_setattr(struct dentry * dentry, struct iattr * iattr)
{
struct inode * inode = dentry->d_inode;
return NULL;
}
+static inline void orphan_all_buffers(struct inode *node)
+{
+ struct sysfs_buffer_collection *set = node->i_private;
+ struct sysfs_buffer *buf;
+
+ mutex_lock_nested(&node->i_mutex, I_MUTEX_CHILD);
+ if (node->i_private) {
+ list_for_each_entry(buf, &set->associates, associates) {
+ down(&buf->sem);
+ buf->orphaned = 1;
+ up(&buf->sem);
+ }
+ }
+ mutex_unlock(&node->i_mutex);
+}
+
/*
* Unhashes the dentry corresponding to given sysfs_dirent
void sysfs_drop_dentry(struct sysfs_dirent * sd, struct dentry * parent)
{
struct dentry * dentry = sd->s_dentry;
+ struct inode *inode;
if (dentry) {
spin_lock(&dcache_lock);
spin_lock(&dentry->d_lock);
if (!(d_unhashed(dentry) && dentry->d_inode)) {
+ inode = dentry->d_inode;
+ spin_lock(&inode->i_lock);
+ __iget(inode);
+ spin_unlock(&inode->i_lock);
dget_locked(dentry);
__d_drop(dentry);
spin_unlock(&dentry->d_lock);
spin_unlock(&dcache_lock);
simple_unlink(parent->d_inode, dentry);
+ orphan_all_buffers(inode);
+ iput(inode);
} else {
spin_unlock(&dentry->d_lock);
spin_unlock(&dcache_lock);
return -ENOENT;
parent_sd = dir->d_fsdata;
- mutex_lock(&dir->d_inode->i_mutex);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
list_for_each_entry(sd, &parent_sd->s_children, s_sibling) {
if (!sd->s_element)
continue;
#include <linux/mount.h>
#include <linux/pagemap.h>
#include <linux/init.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
struct super_block * sysfs_sb = NULL;
struct kmem_cache *sysfs_dir_cachep;
+static void sysfs_clear_inode(struct inode *inode);
+
static struct super_operations sysfs_ops = {
.statfs = simple_statfs,
- .drop_inode = generic_delete_inode,
+ .drop_inode = sysfs_delete_inode,
+ .clear_inode = sysfs_clear_inode,
};
static struct sysfs_dirent sysfs_root = {
.s_iattr = NULL,
};
+static void sysfs_clear_inode(struct inode *inode)
+{
+ kfree(inode->i_private);
+}
+
static int sysfs_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
#include <linux/module.h>
#include <linux/kobject.h>
#include <linux/namei.h>
+#include <asm/semaphore.h>
#include "sysfs.h"
extern struct vfsmount * sysfs_mount;
extern struct kmem_cache *sysfs_dir_cachep;
+extern void sysfs_delete_inode(struct inode *inode);
extern struct inode * sysfs_new_inode(mode_t mode, struct sysfs_dirent *);
extern int sysfs_create(struct dentry *, int mode, int (*init)(struct inode *));
struct kobject * target_kobj;
};
+struct sysfs_buffer {
+ struct list_head associates;
+ size_t count;
+ loff_t pos;
+ char * page;
+ struct sysfs_ops * ops;
+ struct semaphore sem;
+ int orphaned;
+ int needs_read_fill;
+ int event;
+};
+
+struct sysfs_buffer_collection {
+ struct list_head associates;
+};
+
static inline struct kobject * to_kobj(struct dentry * dentry)
{
struct sysfs_dirent * sd = dentry->d_fsdata;
release_sysfs_dirent(sd);
}
+static inline int sysfs_is_shadowed_inode(struct inode *inode)
+{
+ return S_ISDIR(inode->i_mode) && inode->i_op->follow_link;
+}
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20060707
+#define ACPI_CA_VERSION 0x20070126
/*
* OS name, used for the _OS object. The _OS object is essentially obsolete,
#define ACPI_NUM_OWNERID_MASKS 8
+/* Size of the root table array is increased by this increment */
+
+#define ACPI_ROOT_TABLE_SIZE_INCREMENT 4
+
/******************************************************************************
*
* ACPI Specification constants (Do not change unless the specification changes)
#define ACPI_PATH_SEGMENT_LENGTH 5 /* 4 chars for name + 1 char for separator */
#define ACPI_PATH_SEPARATOR '.'
+/* Sizes for ACPI table headers */
+
+#define ACPI_OEM_ID_SIZE 6
+#define ACPI_OEM_TABLE_ID_SIZE 8
+
/* Constants used in searching for the RSDP in low memory */
#define ACPI_EBDA_PTR_LOCATION 0x0000040E /* Physical Address */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_db_create_execution_threads(char *num_threads_arg,
char *num_loops_arg, char *method_name_arg);
+#ifdef ACPI_DBG_TRACK_ALLOCATIONS
+u32 acpi_db_get_cache_info(struct acpi_memory_list *cache);
+#endif
+
/*
* dbfileio - Debugger file I/O commands
*/
struct acpi_namespace_node *acpi_db_local_ns_lookup(char *name);
+void acpi_db_uint32_to_hex_string(u32 value, char *buffer);
+
#endif /* __ACDEBUG_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_DMT_CHKSUM 20
#define ACPI_DMT_SPACEID 21
#define ACPI_DMT_GAS 22
-#define ACPI_DMT_MADT 23
-#define ACPI_DMT_SRAT 24
-#define ACPI_DMT_EXIT 25
+#define ACPI_DMT_DMAR 23
+#define ACPI_DMT_MADT 24
+#define ACPI_DMT_SRAT 25
+#define ACPI_DMT_EXIT 26
+#define ACPI_DMT_SIG 27
typedef
void (*ACPI_TABLE_HANDLER) (struct acpi_table_header * table);
char *signature;
struct acpi_dmtable_info *table_info;
ACPI_TABLE_HANDLER table_handler;
+ char *name;
};
struct acpi_op_walk_info {
extern struct acpi_dmtable_info acpi_dm_table_info_asf0[];
extern struct acpi_dmtable_info acpi_dm_table_info_asf1[];
+extern struct acpi_dmtable_info acpi_dm_table_info_asf1a[];
extern struct acpi_dmtable_info acpi_dm_table_info_asf2[];
+extern struct acpi_dmtable_info acpi_dm_table_info_asf2a[];
extern struct acpi_dmtable_info acpi_dm_table_info_asf3[];
extern struct acpi_dmtable_info acpi_dm_table_info_asf4[];
extern struct acpi_dmtable_info acpi_dm_table_info_asf_hdr[];
extern struct acpi_dmtable_info acpi_dm_table_info_cpep[];
extern struct acpi_dmtable_info acpi_dm_table_info_cpep0[];
extern struct acpi_dmtable_info acpi_dm_table_info_dbgp[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar_hdr[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar_scope[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar0[];
+extern struct acpi_dmtable_info acpi_dm_table_info_dmar1[];
extern struct acpi_dmtable_info acpi_dm_table_info_ecdt[];
extern struct acpi_dmtable_info acpi_dm_table_info_facs[];
extern struct acpi_dmtable_info acpi_dm_table_info_fadt1[];
void acpi_dm_dump_cpep(struct acpi_table_header *table);
+void acpi_dm_dump_dmar(struct acpi_table_header *table);
+
void acpi_dm_dump_fadt(struct acpi_table_header *table);
void acpi_dm_dump_srat(struct acpi_table_header *table);
union acpi_parse_object *op,
u8 * byte_data, u32 byte_count);
-u8 acpi_dm_is_resource_template(union acpi_parse_object *op);
+acpi_status acpi_dm_is_resource_template(union acpi_parse_object *op);
void acpi_dm_indent(u32 level);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* dsinit
*/
acpi_status
-acpi_ds_initialize_objects(struct acpi_table_desc *table_desc,
+acpi_ds_initialize_objects(acpi_native_uint table_index,
struct acpi_namespace_node *start_node);
/*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define AE_CTRL_BREAK (acpi_status) (0x0009 | AE_CODE_CONTROL)
#define AE_CTRL_CONTINUE (acpi_status) (0x000A | AE_CODE_CONTROL)
#define AE_CTRL_SKIP (acpi_status) (0x000B | AE_CODE_CONTROL)
+#define AE_CTRL_PARSE_CONTINUE (acpi_status) (0x000C | AE_CODE_CONTROL)
+#define AE_CTRL_PARSE_PENDING (acpi_status) (0x000D | AE_CODE_CONTROL)
-#define AE_CODE_CTRL_MAX 0x000B
+#define AE_CODE_CTRL_MAX 0x000D
#ifdef DEFINE_ACPI_GLOBALS
"AE_CTRL_TRANSFER",
"AE_CTRL_BREAK",
"AE_CTRL_CONTINUE",
- "AE_CTRL_SKIP"
+ "AE_CTRL_SKIP",
+ "AE_CTRL_PARSE_CONTINUE",
+ "AE_CTRL_PARSE_PENDING"
};
#endif /* ACPI GLOBALS */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_INIT_GLOBAL(a,b) a
#endif
-/*
- * Keep local copies of these FADT-based registers. NOTE: These globals
- * are first in this file for alignment reasons on 64-bit systems.
- */
-ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
-ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
-
-/*****************************************************************************
- *
- * Debug support
- *
- ****************************************************************************/
-
-/* Runtime configuration of debug print levels */
-
-extern u32 acpi_dbg_level;
-extern u32 acpi_dbg_layer;
-
-/* Procedure nesting level for debug output */
-
-extern u32 acpi_gbl_nesting_level;
-
-/* Support for dynamic control method tracing mechanism */
-
-ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
-ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
-ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
-ACPI_EXTERN u32 acpi_gbl_trace_flags;
-
/*****************************************************************************
*
* Runtime configuration (static defaults that can be overriden at runtime)
*/
ACPI_EXTERN u8 ACPI_INIT_GLOBAL(acpi_gbl_leave_wake_gpes_disabled, TRUE);
+/*****************************************************************************
+ *
+ * Debug support
+ *
+ ****************************************************************************/
+
+/* Runtime configuration of debug print levels */
+
+extern u32 acpi_dbg_level;
+extern u32 acpi_dbg_layer;
+
+/* Procedure nesting level for debug output */
+
+extern u32 acpi_gbl_nesting_level;
+
+/* Event counters */
+
+ACPI_EXTERN u32 acpi_gpe_count;
+
+/* Support for dynamic control method tracing mechanism */
+
+ACPI_EXTERN u32 acpi_gbl_original_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_original_dbg_layer;
+ACPI_EXTERN acpi_name acpi_gbl_trace_method_name;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_level;
+ACPI_EXTERN u32 acpi_gbl_trace_dbg_layer;
+ACPI_EXTERN u32 acpi_gbl_trace_flags;
+
/*****************************************************************************
*
* ACPI Table globals
****************************************************************************/
/*
- * Table pointers.
- * Although these pointers are somewhat redundant with the global acpi_table,
- * they are convenient because they are typed pointers.
+ * acpi_gbl_root_table_list is the master list of ACPI tables found in the
+ * RSDT/XSDT.
*
- * These tables are single-table only; meaning that there can be at most one
- * of each in the system. Each global points to the actual table.
- */
-ACPI_EXTERN u32 acpi_gbl_table_flags;
-ACPI_EXTERN u32 acpi_gbl_rsdt_table_count;
-ACPI_EXTERN struct rsdp_descriptor *acpi_gbl_RSDP;
-ACPI_EXTERN struct xsdt_descriptor *acpi_gbl_XSDT;
-ACPI_EXTERN struct fadt_descriptor *acpi_gbl_FADT;
-ACPI_EXTERN struct acpi_table_header *acpi_gbl_DSDT;
-ACPI_EXTERN struct facs_descriptor *acpi_gbl_FACS;
-ACPI_EXTERN struct acpi_common_facs acpi_gbl_common_fACS;
-/*
- * Since there may be multiple SSDTs and PSDTs, a single pointer is not
- * sufficient; Therefore, there isn't one!
+ * acpi_gbl_FADT is a local copy of the FADT, converted to a common format.
*/
+ACPI_EXTERN struct acpi_internal_rsdt acpi_gbl_root_table_list;
+ACPI_EXTERN struct acpi_table_fadt acpi_gbl_FADT;
+extern acpi_native_uint acpi_gbl_permanent_mmap;
-/* The root table can be either an RSDT or an XSDT */
+/* These addresses are calculated from FADT address values */
-ACPI_EXTERN u8 acpi_gbl_root_table_type;
-#define ACPI_TABLE_TYPE_RSDT 'R'
-#define ACPI_TABLE_TYPE_XSDT 'X'
+ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1a_enable;
+ACPI_EXTERN struct acpi_generic_address acpi_gbl_xpm1b_enable;
/*
- * Handle both ACPI 1.0 and ACPI 2.0 Integer widths:
- * If we are executing a method that exists in a 32-bit ACPI table,
- * use only the lower 32 bits of the (internal) 64-bit Integer.
+ * Handle both ACPI 1.0 and ACPI 2.0 Integer widths. The integer width is
+ * determined by the revision of the DSDT: If the DSDT revision is less than
+ * 2, use only the lower 32 bits of the internal 64-bit Integer.
*/
ACPI_EXTERN u8 acpi_gbl_integer_bit_width;
ACPI_EXTERN u8 acpi_gbl_integer_byte_width;
ACPI_EXTERN u8 acpi_gbl_integer_nybble_width;
-/*
- * ACPI Table info arrays
- */
-extern struct acpi_table_list acpi_gbl_table_lists[ACPI_TABLE_ID_MAX + 1];
-extern struct acpi_table_support acpi_gbl_table_data[ACPI_TABLE_ID_MAX + 1];
-
/*****************************************************************************
*
* Mutual exlusion within ACPICA subsystem
****************************************************************************/
/*
- * Predefined mutex objects. This array contains the
+ * Predefined mutex objects. This array contains the
* actual OS mutex handles, indexed by the local ACPI_MUTEX_HANDLEs.
* (The table maps local handles to the real OS handles)
*/
/*
* Global lock semaphore works in conjunction with the actual HW global lock
*/
+ACPI_EXTERN acpi_mutex acpi_gbl_global_lock_mutex;
ACPI_EXTERN acpi_semaphore acpi_gbl_global_lock_semaphore;
/*
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_global_list;
ACPI_EXTERN struct acpi_memory_list *acpi_gbl_ns_node_list;
+ACPI_EXTERN u8 acpi_gbl_display_final_mem_stats;
#endif
/* Object caches */
/* Misc */
-ACPI_EXTERN u32 acpi_gbl_global_lock_thread_count;
ACPI_EXTERN u32 acpi_gbl_original_mode;
ACPI_EXTERN u32 acpi_gbl_rsdp_original_location;
ACPI_EXTERN u32 acpi_gbl_ns_lookup_count;
extern u8 acpi_gbl_shutdown;
extern u32 acpi_gbl_startup_flags;
-extern const u8 acpi_gbl_decode_to8bit[8];
extern const char *acpi_gbl_sleep_state_names[ACPI_S_STATE_COUNT];
extern const char *acpi_gbl_highest_dstate_names[4];
extern const struct acpi_opcode_info acpi_gbl_aml_op_info[AML_NUM_OPCODES];
extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
+/* Exception codes */
+
+extern char const *acpi_gbl_exception_names_env[];
+extern char const *acpi_gbl_exception_names_pgm[];
+extern char const *acpi_gbl_exception_names_tbl[];
+extern char const *acpi_gbl_exception_names_aml[];
+extern char const *acpi_gbl_exception_names_ctrl[];
+
/*****************************************************************************
*
* Namespace globals
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/*
* hwacpi - high level functions
*/
-acpi_status acpi_hw_initialize(void);
-
acpi_status acpi_hw_set_mode(u32 mode);
u32 acpi_hw_get_mode(void);
acpi_status
acpi_hw_low_level_write(u32 width, u32 value, struct acpi_generic_address *reg);
-acpi_status acpi_hw_clear_acpi_status(u32 flags);
+acpi_status acpi_hw_clear_acpi_status(void);
/*
* hwgpe - GPE support
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
acpi_status acpi_ex_system_do_stall(u32 time);
-acpi_status
-acpi_ex_system_acquire_mutex(union acpi_operand_object *time,
- union acpi_operand_object *obj_desc);
-
-acpi_status acpi_ex_system_release_mutex(union acpi_operand_object *obj_desc);
-
acpi_status acpi_ex_system_signal_event(union acpi_operand_object *obj_desc);
acpi_status
/*
* exutils - interpreter/scanner utilities
*/
-acpi_status acpi_ex_enter_interpreter(void);
+void acpi_ex_enter_interpreter(void);
void acpi_ex_exit_interpreter(void);
+void acpi_ex_reacquire_interpreter(void);
+
+void acpi_ex_relinquish_interpreter(void);
+
void acpi_ex_truncate_for32bit_table(union acpi_operand_object *obj_desc);
u8 acpi_ex_acquire_global_lock(u32 rule);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* table below also!
*/
#define ACPI_MTX_INTERPRETER 0 /* AML Interpreter, main lock */
-#define ACPI_MTX_TABLES 1 /* Data for ACPI tables */
-#define ACPI_MTX_NAMESPACE 2 /* ACPI Namespace */
+#define ACPI_MTX_NAMESPACE 1 /* ACPI Namespace */
+#define ACPI_MTX_TABLES 2 /* Data for ACPI tables */
#define ACPI_MTX_EVENTS 3 /* Data for ACPI events */
#define ACPI_MTX_CACHES 4 /* Internal caches, general purposes */
#define ACPI_MTX_MEMORY 5 /* Debug memory tracking lists */
typedef enum {
ACPI_IMODE_LOAD_PASS1 = 0x01,
ACPI_IMODE_LOAD_PASS2 = 0x02,
- ACPI_IMODE_EXECUTE = 0x0E
+ ACPI_IMODE_EXECUTE = 0x03
} acpi_interpreter_mode;
union acpi_name_union {
/* Namespace Node flags */
#define ANOBJ_END_OF_PEER_LIST 0x01 /* End-of-list, Peer field points to parent */
-#define ANOBJ_RESERVED 0x02 /* Available for future use */
+#define ANOBJ_TEMPORARY 0x02 /* Node is create by a method and is temporary */
#define ANOBJ_METHOD_ARG 0x04 /* Node is a method argument */
#define ANOBJ_METHOD_LOCAL 0x08 /* Node is a method local */
#define ANOBJ_SUBTREE_HAS_INI 0x10 /* Used to optimize device initialization */
* ACPI Table Descriptor. One per ACPI table
*/
struct acpi_table_desc {
- struct acpi_table_desc *prev;
- struct acpi_table_desc *next;
- struct acpi_table_desc *installed_desc;
+ acpi_physical_address address;
struct acpi_table_header *pointer;
- u8 *aml_start;
- u64 physical_address;
- acpi_size length;
- u32 aml_length;
+ u32 length; /* Length fixed at 32 bits */
+ union acpi_name_union signature;
acpi_owner_id owner_id;
- u8 type;
- u8 allocation;
- u8 loaded_into_namespace;
+ u8 flags;
};
-struct acpi_table_list {
- struct acpi_table_desc *next;
+/* Flags for above */
+
+#define ACPI_TABLE_ORIGIN_UNKNOWN (0)
+#define ACPI_TABLE_ORIGIN_MAPPED (1)
+#define ACPI_TABLE_ORIGIN_ALLOCATED (2)
+#define ACPI_TABLE_ORIGIN_MASK (3)
+#define ACPI_TABLE_IS_LOADED (4)
+
+/* One internal RSDT for table management */
+
+struct acpi_internal_rsdt {
+ struct acpi_table_desc *tables;
u32 count;
+ u32 size;
+ u8 flags;
};
+/* Flags for above */
+
+#define ACPI_ROOT_ORIGIN_UNKNOWN (0) /* ~ORIGIN_ALLOCATED */
+#define ACPI_ROOT_ORIGIN_ALLOCATED (1)
+#define ACPI_ROOT_ALLOW_RESIZE (2)
+
+/* Predefined (fixed) table indexes */
+
+#define ACPI_TABLE_INDEX_DSDT (0)
+#define ACPI_TABLE_INDEX_FACS (1)
+
struct acpi_find_context {
char *search_for;
acpi_handle *list;
union acpi_gpe_dispatch_info dispatch; /* Either Method or Handler */
struct acpi_gpe_register_info *register_info; /* Backpointer to register info */
u8 flags; /* Misc info about this GPE */
- u8 register_bit; /* This GPE bit within the register */
+ u8 gpe_number; /* This GPE */
};
/* Information about a GPE register pair, one per each status/enable pair in an array */
****************************************************************************/
struct acpi_db_method_info {
- acpi_handle thread_gate;
+ acpi_handle main_thread_gate;
+ acpi_handle thread_complete_gate;
+ u32 *threads;
+ u32 num_threads;
+ u32 num_created;
+ u32 num_completed;
+
char *name;
- char **args;
u32 flags;
u32 num_loops;
char pathname[128];
+ char **args;
+
+ /*
+ * Arguments to be passed to method for the command
+ * Threads -
+ * the Number of threads, ID of current thread and
+ * Index of current thread inside all them created.
+ */
+ char init_args;
+ char *arguments[4];
+ char num_threads_str[11];
+ char id_of_thread_str[11];
+ char index_of_thread_str[11];
};
struct acpi_integrity_info {
u32 total_allocated;
u32 total_freed;
+ u32 max_occupied;
+ u32 total_size;
u32 current_total_size;
u32 requests;
u32 hits;
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_SET_BIT(target,bit) ((target) |= (bit))
#define ACPI_CLEAR_BIT(target,bit) ((target) &= ~(bit))
#define ACPI_MIN(a,b) (((a)<(b))?(a):(b))
+#define ACPI_MAX(a,b) (((a)>(b))?(a):(b))
/* Size calculation */
#define ACPI_ARRAY_LENGTH(x) (sizeof(x) / sizeof((x)[0]))
-#if ACPI_MACHINE_WIDTH == 16
-
-/*
- * For 16-bit addresses, we have to assume that the upper 32 bits
- * (out of 64) are zero.
- */
-#define ACPI_LODWORD(l) ((u32)(l))
-#define ACPI_HIDWORD(l) ((u32)(0))
-
-#define ACPI_GET_ADDRESS(a) ((a).lo)
-#define ACPI_STORE_ADDRESS(a,b) {(a).hi=0;(a).lo=(u32)(b);}
-#define ACPI_VALID_ADDRESS(a) ((a).hi | (a).lo)
-
-#else
#ifdef ACPI_NO_INTEGER64_SUPPORT
/*
* acpi_integer is 32-bits, no 64-bit support on this platform
#define ACPI_LODWORD(l) ((u32)(l))
#define ACPI_HIDWORD(l) ((u32)(0))
-#define ACPI_GET_ADDRESS(a) (a)
-#define ACPI_STORE_ADDRESS(a,b) ((a)=(b))
-#define ACPI_VALID_ADDRESS(a) (a)
-
#else
/*
*/
#define ACPI_LODWORD(l) ((u32)(u64)(l))
#define ACPI_HIDWORD(l) ((u32)(((*(struct uint64_struct *)(void *)(&l))).hi))
-
-#define ACPI_GET_ADDRESS(a) (a)
-#define ACPI_STORE_ADDRESS(a,b) ((a)=(acpi_physical_address)(b))
-#define ACPI_VALID_ADDRESS(a) (a)
-#endif
#endif
/*
#define ACPI_TO_POINTER(i) ACPI_ADD_PTR (void,(void *) NULL,(acpi_native_uint) i)
#define ACPI_TO_INTEGER(p) ACPI_PTR_DIFF (p,(void *) NULL)
#define ACPI_OFFSET(d,f) (acpi_size) ACPI_PTR_DIFF (&(((d *)0)->f),(void *) NULL)
-
-#if ACPI_MACHINE_WIDTH == 16
-#define ACPI_STORE_POINTER(d,s) ACPI_MOVE_32_TO_32(d,s)
-#define ACPI_PHYSADDR_TO_PTR(i) (void *)(i)
-#define ACPI_PTR_TO_PHYSADDR(i) (u32) ACPI_CAST_PTR (u8,(i))
-#else
#define ACPI_PHYSADDR_TO_PTR(i) ACPI_TO_POINTER(i)
#define ACPI_PTR_TO_PHYSADDR(i) ACPI_TO_INTEGER(i)
-#endif
#ifndef ACPI_MISALIGNMENT_NOT_SUPPORTED
#define ACPI_COMPARE_NAME(a,b) (*ACPI_CAST_PTR (u32,(a)) == *ACPI_CAST_PTR (u32,(b)))
/* The hardware supports unaligned transfers, just do the little-endian move */
-#if ACPI_MACHINE_WIDTH == 16
-
-/* No 64-bit integers */
-/* 16-bit source, 16/32/64 destination */
-
-#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
-#define ACPI_MOVE_16_TO_32(d,s) *(u32 *)(void *)(d) = *(u16 *)(void *)(s)
-#define ACPI_MOVE_16_TO_64(d,s) ACPI_MOVE_16_TO_32(d,s)
-
-/* 32-bit source, 16/32/64 destination */
-
-#define ACPI_MOVE_32_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
-#define ACPI_MOVE_32_TO_32(d,s) *(u32 *)(void *)(d) = *(u32 *)(void *)(s)
-#define ACPI_MOVE_32_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s)
-
-/* 64-bit source, 16/32/64 destination */
-
-#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
-#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
-#define ACPI_MOVE_64_TO_64(d,s) ACPI_MOVE_32_TO_32(d,s)
-
-#else
/* 16-bit source, 16/32/64 destination */
#define ACPI_MOVE_16_TO_16(d,s) *(u16 *)(void *)(d) = *(u16 *)(void *)(s)
#define ACPI_MOVE_64_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s) /* Truncate to 16 */
#define ACPI_MOVE_64_TO_32(d,s) ACPI_MOVE_32_TO_32(d,s) /* Truncate to 32 */
#define ACPI_MOVE_64_TO_64(d,s) *(u64 *)(void *)(d) = *(u64 *)(void *)(s)
-#endif
#else
/*
/* Macros based on machine integer width */
-#if ACPI_MACHINE_WIDTH == 16
-#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_16_TO_16(d,s)
-
-#elif ACPI_MACHINE_WIDTH == 32
+#if ACPI_MACHINE_WIDTH == 32
#define ACPI_MOVE_SIZE_TO_16(d,s) ACPI_MOVE_32_TO_16(d,s)
#elif ACPI_MACHINE_WIDTH == 64
#define ACPI_DEBUGGER_EXEC(a)
#endif
-/*
- * For 16-bit code, we want to shrink some things even though
- * we are using ACPI_DEBUG_OUTPUT to get the debug output
- */
-#if ACPI_MACHINE_WIDTH == 16
-#undef ACPI_DEBUG_ONLY_MEMBERS
-#undef _VERBOSE_STRUCTURES
-#define ACPI_DEBUG_ONLY_MEMBERS(a)
-#endif
-
#ifdef ACPI_DEBUG_OUTPUT
/*
* 1) Set name to blanks
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_NS_ERROR_IF_FOUND 0x08
#define ACPI_NS_PREFIX_IS_SCOPE 0x10
#define ACPI_NS_EXTERNAL 0x20
+#define ACPI_NS_TEMPORARY 0x40
-#define ACPI_NS_WALK_UNLOCK TRUE
-#define ACPI_NS_WALK_NO_UNLOCK FALSE
+/* Flags for acpi_ns_walk_namespace */
+
+#define ACPI_NS_WALK_NO_UNLOCK 0
+#define ACPI_NS_WALK_UNLOCK 0x01
+#define ACPI_NS_WALK_TEMP_NODES 0x02
/*
* nsinit - Namespace initialization
acpi_status acpi_ns_load_namespace(void);
acpi_status
-acpi_ns_load_table(struct acpi_table_desc *table_desc,
+acpi_ns_load_table(acpi_native_uint table_index,
struct acpi_namespace_node *node);
/*
acpi_ns_walk_namespace(acpi_object_type type,
acpi_handle start_object,
u32 max_depth,
- u8 unlock_before_callback,
+ u32 flags,
acpi_walk_callback user_function,
void *context, void **return_value);
* nsparse - table parsing
*/
acpi_status
-acpi_ns_parse_table(struct acpi_table_desc *table_desc,
- struct acpi_namespace_node *scope);
+acpi_ns_parse_table(acpi_native_uint table_index,
+ struct acpi_namespace_node *start_node);
acpi_status
-acpi_ns_one_complete_parse(u8 pass_number, struct acpi_table_desc *table_desc);
+acpi_ns_one_complete_parse(acpi_native_uint pass_number,
+ acpi_native_uint table_index);
/*
* nsaccess - Top-level namespace access
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* to the interpreter, and to keep track of the various handlers such as
* address space handlers and notify handlers. The object is a constant
* size in order to allow it to be cached and reused.
+ *
+ * Note: The object is optimized to be aligned and will not work if it is
+ * byte-packed.
*/
+#if ACPI_MACHINE_WIDTH == 64
+#pragma pack(8)
+#else
+#pragma pack(4)
+#endif
/*******************************************************************************
*
ACPI_OBJECT_COMMON_HEADER};
struct acpi_object_integer {
- ACPI_OBJECT_COMMON_HEADER acpi_integer value;
+ ACPI_OBJECT_COMMON_HEADER u8 fill[3]; /* Prevent warning on some compilers */
+ acpi_integer value;
};
/*
};
struct acpi_object_processor {
- ACPI_OBJECT_COMMON_HEADER u8 proc_id;
+ ACPI_OBJECT_COMMON_HEADER
+ /* The next two fields take advantage of the 3-byte space before NOTIFY_INFO */
+ u8 proc_id;
u8 length;
ACPI_COMMON_NOTIFY_INFO acpi_io_address address;
};
union acpi_parse_object op;
};
+#pragma pack()
+
#endif /* _ACOBJECT_H */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ARGI_LLESSEQUAL_OP ARGI_INVALID_OPCODE
#define ARGI_LNOT_OP ARGI_LIST1 (ARGI_INTEGER)
#define ARGI_LNOTEQUAL_OP ARGI_INVALID_OPCODE
-#define ARGI_LOAD_OP ARGI_LIST2 (ARGI_REGION_OR_FIELD,ARGI_TARGETREF)
+#define ARGI_LOAD_OP ARGI_LIST2 (ARGI_REGION_OR_BUFFER,ARGI_TARGETREF)
#define ARGI_LOAD_TABLE_OP ARGI_LIST6 (ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_STRING, ARGI_ANYTYPE)
#define ARGI_LOCAL0 ARG_NONE
#define ARGI_LOCAL1 ARG_NONE
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_BUS_FILE_ROOT "acpi"
extern struct proc_dir_entry *acpi_root_dir;
-extern struct fadt_descriptor acpi_fadt;
enum acpi_bus_removal_type {
ACPI_BUS_REMOVAL_NORMAL = 0,
typedef int (*acpi_op_lock) (struct acpi_device * device, int type);
typedef int (*acpi_op_start) (struct acpi_device * device);
typedef int (*acpi_op_stop) (struct acpi_device * device, int type);
-typedef int (*acpi_op_suspend) (struct acpi_device * device, int state);
-typedef int (*acpi_op_resume) (struct acpi_device * device, int state);
+typedef int (*acpi_op_suspend) (struct acpi_device * device, pm_message_t state);
+typedef int (*acpi_op_resume) (struct acpi_device * device);
typedef int (*acpi_op_scan) (struct acpi_device * device);
typedef int (*acpi_op_bind) (struct acpi_device * device);
typedef int (*acpi_op_unbind) (struct acpi_device * device);
-typedef int (*acpi_op_match) (struct acpi_device * device,
- struct acpi_driver * driver);
+typedef int (*acpi_op_shutdown) (struct acpi_device * device);
struct acpi_bus_ops {
u32 acpi_op_add:1;
u32 acpi_op_scan:1;
u32 acpi_op_bind:1;
u32 acpi_op_unbind:1;
- u32 acpi_op_match:1;
+ u32 acpi_op_shutdown:1;
u32 reserved:21;
};
acpi_op_scan scan;
acpi_op_bind bind;
acpi_op_unbind unbind;
- acpi_op_match match;
+ acpi_op_shutdown shutdown;
};
struct acpi_driver {
- struct list_head node;
char name[80];
char class[80];
- atomic_t references;
char *ids; /* Supported Hardware IDs */
struct acpi_device_ops ops;
+ struct device_driver drv;
+ struct module *owner;
};
/*
typedef char acpi_bus_id[5];
typedef unsigned long acpi_bus_address;
-typedef char acpi_hardware_id[9];
+typedef char acpi_hardware_id[15];
typedef char acpi_unique_id[9];
typedef char acpi_device_name[40];
typedef char acpi_device_class[20];
struct acpi_device_ops ops;
struct acpi_driver *driver;
void *driver_data;
- struct kobject kobj;
struct device dev;
+ struct acpi_bus_ops bus_ops; /* workaround for different code path for hotplug */
+ enum acpi_bus_removal_type removal_type; /* indicate for different removal type */
};
#define acpi_driver_data(d) ((d)->driver_data)
+#define to_acpi_device(d) container_of(d, struct acpi_device, dev)
+#define to_acpi_driver(d) container_of(d, struct acpi_driver, drv)
/*
* Events
/* _HID definitions */
-#define ACPI_POWER_HID "ACPI_PWR"
-#define ACPI_PROCESSOR_HID "ACPI_CPU"
-#define ACPI_SYSTEM_HID "ACPI_SYS"
-#define ACPI_THERMAL_HID "ACPI_THM"
-#define ACPI_BUTTON_HID_POWERF "ACPI_FPB"
-#define ACPI_BUTTON_HID_SLEEPF "ACPI_FSB"
-
+#define ACPI_POWER_HID "power_resource"
+#define ACPI_PROCESSOR_HID "ACPI0007"
+#define ACPI_SYSTEM_HID "acpi_system"
+#define ACPI_THERMAL_HID "thermal"
+#define ACPI_BUTTON_HID_POWERF "button_power"
+#define ACPI_BUTTON_HID_SLEEPF "button_sleep"
+#define ACPI_VIDEO_HID "video"
+#define ACPI_BAY_HID "bay"
/* --------------------------------------------------------------------------
PCI
-------------------------------------------------------------------------- */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/*
* ACPI Table interfaces
*/
-acpi_status acpi_os_get_root_pointer(u32 flags, struct acpi_pointer *address);
+acpi_physical_address acpi_os_get_root_pointer(void);
acpi_status
acpi_os_predefined_override(const struct acpi_predefined_names *init_val,
*/
void *acpi_os_allocate(acpi_size size);
-acpi_status
-acpi_os_map_memory(acpi_physical_address physical_address,
- acpi_size size, void __iomem ** logical_address);
+void __iomem *acpi_os_map_memory(acpi_physical_address where, acpi_native_uint length);
void acpi_os_unmap_memory(void __iomem * logical_address, acpi_size size);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/*
* Global interfaces
*/
+acpi_status
+acpi_initialize_tables(struct acpi_table_desc *initial_storage,
+ u32 initial_table_count, u8 allow_resize);
+
acpi_status acpi_initialize_subsystem(void);
acpi_status acpi_enable_subsystem(u32 flags);
/*
* ACPI table manipulation interfaces
*/
-acpi_status
-acpi_find_root_pointer(u32 flags, struct acpi_pointer *rsdp_address);
+acpi_status acpi_reallocate_root_table(void);
+
+acpi_status acpi_find_root_pointer(acpi_native_uint * rsdp_address);
acpi_status acpi_load_tables(void);
acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
-acpi_status acpi_unload_table_id(acpi_table_type table_type, acpi_owner_id id);
+acpi_status acpi_unload_table_id(acpi_owner_id id);
-#ifdef ACPI_FUTURE_USAGE
-acpi_status acpi_unload_table(acpi_table_type table_type);
acpi_status
-acpi_get_table_header(acpi_table_type table_type,
- u32 instance, struct acpi_table_header *out_table_header);
-#endif /* ACPI_FUTURE_USAGE */
+acpi_get_table_header(acpi_string signature,
+ acpi_native_uint instance,
+ struct acpi_table_header *out_table_header);
acpi_status
-acpi_get_table(acpi_table_type table_type,
- u32 instance, struct acpi_buffer *ret_buffer);
+acpi_get_table(acpi_string signature,
+ acpi_native_uint instance, struct acpi_table_header **out_table);
acpi_status
-acpi_get_firmware_table(acpi_string signature,
- u32 instance,
- u32 flags, struct acpi_table_header **table_pointer);
+acpi_get_table_by_index(acpi_native_uint table_index,
+ struct acpi_table_header **out_table);
/*
* Namespace and name interfaces
/*
* Hardware (ACPI device) interfaces
*/
-acpi_status acpi_get_register(u32 register_id, u32 * return_value, u32 flags);
+acpi_status acpi_get_register(u32 register_id, u32 * return_value);
-acpi_status acpi_set_register(u32 register_id, u32 value, u32 flags);
+acpi_status acpi_set_register(u32 register_id, u32 value);
acpi_status
acpi_set_firmware_waking_vector(acpi_physical_address physical_address);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
u16 buffer_init;
u16 package_init;
u16 object_count;
- struct acpi_table_desc *table_desc;
+ acpi_owner_id owner_id;
+ acpi_native_uint table_index;
};
struct acpi_get_devices_info {
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#ifndef __ACTABLES_H__
#define __ACTABLES_H__
-/* Used in acpi_tb_map_acpi_table for size parameter if table header is to be used */
-
-#define SIZE_IN_HEADER 0
+acpi_status acpi_allocate_root_table(u32 initial_table_count);
/*
- * tbconvrt - Table conversion routines
+ * tbfadt - FADT parse/convert/validate
*/
-acpi_status acpi_tb_convert_to_xsdt(struct acpi_table_desc *table_info);
-
-acpi_status acpi_tb_convert_table_fadt(void);
+void acpi_tb_parse_fadt(acpi_native_uint table_index, u8 flags);
-acpi_status acpi_tb_build_common_facs(struct acpi_table_desc *table_info);
-
-u32
-acpi_tb_get_table_count(struct rsdp_descriptor *RSDP,
- struct acpi_table_header *RSDT);
+void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length);
/*
- * tbget - Table "get" routines
+ * tbfind - find ACPI table
*/
acpi_status
-acpi_tb_get_table(struct acpi_pointer *address,
- struct acpi_table_desc *table_info);
-
-acpi_status
-acpi_tb_get_table_header(struct acpi_pointer *address,
- struct acpi_table_header *return_header);
-
-acpi_status
-acpi_tb_get_table_body(struct acpi_pointer *address,
- struct acpi_table_header *header,
- struct acpi_table_desc *table_info);
-
-acpi_status
-acpi_tb_get_table_ptr(acpi_table_type table_type,
- u32 instance, struct acpi_table_header **table_ptr_loc);
-
-acpi_status acpi_tb_verify_rsdp(struct acpi_pointer *address);
-
-void acpi_tb_get_rsdt_address(struct acpi_pointer *out_address);
-
-acpi_status acpi_tb_validate_rsdt(struct acpi_table_header *table_ptr);
+acpi_tb_find_table(char *signature,
+ char *oem_id,
+ char *oem_table_id, acpi_native_uint * table_index);
/*
- * tbgetall - get multiple required tables
+ * tbinstal - Table removal and deletion
*/
-acpi_status acpi_tb_get_required_tables(void);
+acpi_status acpi_tb_resize_root_table_list(void);
-/*
- * tbinstall - Table installation
- */
-acpi_status acpi_tb_install_table(struct acpi_table_desc *table_info);
+acpi_status acpi_tb_verify_table(struct acpi_table_desc *table_desc);
acpi_status
-acpi_tb_recognize_table(struct acpi_table_desc *table_info, u8 search_type);
+acpi_tb_add_table(struct acpi_table_desc *table_desc,
+ acpi_native_uint * table_index);
acpi_status
-acpi_tb_init_table_descriptor(acpi_table_type table_type,
- struct acpi_table_desc *table_info);
+acpi_tb_store_table(acpi_physical_address address,
+ struct acpi_table_header *table,
+ u32 length, u8 flags, acpi_native_uint * table_index);
-/*
- * tbremove - Table removal and deletion
- */
-void acpi_tb_delete_all_tables(void);
+void acpi_tb_delete_table(struct acpi_table_desc *table_desc);
-void acpi_tb_delete_tables_by_type(acpi_table_type type);
+void acpi_tb_terminate(void);
-void acpi_tb_delete_single_table(struct acpi_table_desc *table_desc);
+void acpi_tb_delete_namespace_by_owner(acpi_native_uint table_index);
-struct acpi_table_desc *acpi_tb_uninstall_table(struct acpi_table_desc
- *table_desc);
+acpi_status acpi_tb_allocate_owner_id(acpi_native_uint table_index);
+
+acpi_status acpi_tb_release_owner_id(acpi_native_uint table_index);
-/*
- * tbxfroot - RSDP, RSDT utilities
- */
acpi_status
-acpi_tb_find_table(char *signature,
- char *oem_id,
- char *oem_table_id, struct acpi_table_header **table_ptr);
+acpi_tb_get_owner_id(acpi_native_uint table_index, acpi_owner_id * owner_id);
-acpi_status acpi_tb_get_table_rsdt(void);
+u8 acpi_tb_is_table_loaded(acpi_native_uint table_index);
-acpi_status acpi_tb_validate_rsdp(struct rsdp_descriptor *rsdp);
+void acpi_tb_set_table_loaded_flag(acpi_native_uint table_index, u8 is_loaded);
/*
- * tbutils - common table utilities
+ * tbutils - table manager utilities
*/
-acpi_status acpi_tb_is_table_installed(struct acpi_table_desc *new_table_desc);
+u8 acpi_tb_tables_loaded(void);
-acpi_status
-acpi_tb_verify_table_checksum(struct acpi_table_header *table_header);
+void
+acpi_tb_print_table_header(acpi_physical_address address,
+ struct acpi_table_header *header);
-u8 acpi_tb_sum_table(void *buffer, u32 length);
+u8 acpi_tb_checksum(u8 * buffer, acpi_native_uint length);
-u8 acpi_tb_generate_checksum(struct acpi_table_header *table);
+acpi_status
+acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length);
-void acpi_tb_set_checksum(struct acpi_table_header *table);
+void
+acpi_tb_install_table(acpi_physical_address address,
+ u8 flags, char *signature, acpi_native_uint table_index);
acpi_status
-acpi_tb_validate_table_header(struct acpi_table_header *table_header);
+acpi_tb_parse_root_table(acpi_physical_address rsdp_address, u8 flags);
#endif /* __ACTABLES_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* Values for description table header signatures. Useful because they make
* it more difficult to inadvertently type in the wrong signature.
*/
-#define DSDT_SIG "DSDT" /* Differentiated System Description Table */
-#define FADT_SIG "FACP" /* Fixed ACPI Description Table */
-#define FACS_SIG "FACS" /* Firmware ACPI Control Structure */
-#define PSDT_SIG "PSDT" /* Persistent System Description Table */
-#define RSDP_SIG "RSD PTR " /* Root System Description Pointer */
-#define RSDT_SIG "RSDT" /* Root System Description Table */
-#define XSDT_SIG "XSDT" /* Extended System Description Table */
-#define SSDT_SIG "SSDT" /* Secondary System Description Table */
-#define RSDP_NAME "RSDP"
+#define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
+#define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
+#define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
+#define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
+#define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
+#define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
+#define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
+#define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
+#define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
/*
* All tables and structures must be byte-packed to match the ACPI
*
******************************************************************************/
-#define ACPI_TABLE_HEADER_DEF \
- char signature[4]; /* ASCII table signature */\
- u32 length; /* Length of table in bytes, including this header */\
- u8 revision; /* ACPI Specification minor version # */\
- u8 checksum; /* To make sum of entire table == 0 */\
- char oem_id[6]; /* ASCII OEM identification */\
- char oem_table_id[8]; /* ASCII OEM table identification */\
- u32 oem_revision; /* OEM revision number */\
- char asl_compiler_id[4]; /* ASCII ASL compiler vendor ID */\
- u32 asl_compiler_revision; /* ASL compiler version */
-
struct acpi_table_header {
-ACPI_TABLE_HEADER_DEF};
+ char signature[ACPI_NAME_SIZE]; /* ASCII table signature */
+ u32 length; /* Length of table in bytes, including this header */
+ u8 revision; /* ACPI Specification minor version # */
+ u8 checksum; /* To make sum of entire table == 0 */
+ char oem_id[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
+ char oem_table_id[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
+ u32 oem_revision; /* OEM revision number */
+ char asl_compiler_id[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */
+ u32 asl_compiler_revision; /* ASL compiler version */
+};
/*
* GAS - Generic Address Structure (ACPI 2.0+)
+ *
+ * Note: Since this structure is used in the ACPI tables, it is byte aligned.
+ * If misalignment is not supported, access to the Address field must be
+ * performed with care.
*/
struct acpi_generic_address {
- u8 address_space_id; /* Address space where struct or register exists */
- u8 register_bit_width; /* Size in bits of given register */
- u8 register_bit_offset; /* Bit offset within the register */
+ u8 space_id; /* Address space where struct or register exists */
+ u8 bit_width; /* Size in bits of given register */
+ u8 bit_offset; /* Bit offset within the register */
u8 access_width; /* Minimum Access size (ACPI 3.0) */
u64 address; /* 64-bit address of struct or register */
};
*
******************************************************************************/
-struct rsdp_descriptor {
+struct acpi_table_rsdp {
char signature[8]; /* ACPI signature, contains "RSD PTR " */
u8 checksum; /* ACPI 1.0 checksum */
- char oem_id[6]; /* OEM identification */
+ char oem_id[ACPI_OEM_ID_SIZE]; /* OEM identification */
u8 revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
u32 rsdt_physical_address; /* 32-bit physical address of the RSDT */
u32 length; /* Table length in bytes, including header (ACPI 2.0+) */
*
******************************************************************************/
-struct rsdt_descriptor {
- ACPI_TABLE_HEADER_DEF u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
+struct acpi_table_rsdt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 table_offset_entry[1]; /* Array of pointers to ACPI tables */
};
-struct xsdt_descriptor {
- ACPI_TABLE_HEADER_DEF u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
+struct acpi_table_xsdt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u64 table_offset_entry[1]; /* Array of pointers to ACPI tables */
};
/*******************************************************************************
*
******************************************************************************/
-struct facs_descriptor {
+struct acpi_table_facs {
char signature[4]; /* ASCII table signature */
u32 length; /* Length of structure, in bytes */
u32 hardware_signature; /* Hardware configuration signature */
u32 firmware_waking_vector; /* 32-bit physical address of the Firmware Waking Vector */
u32 global_lock; /* Global Lock for shared hardware resources */
-
- /* Flags (32 bits) */
-
- u8 S4bios_f:1; /* 00: S4BIOS support is present */
- u8:7; /* 01-07: Reserved, must be zero */
- u8 reserved1[3]; /* 08-31: Reserved, must be zero */
-
+ u32 flags;
u64 xfirmware_waking_vector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
u8 version; /* Version of this table (ACPI 2.0+) */
u8 reserved[31]; /* Reserved, must be zero */
};
+/* Flag macros */
+
+#define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
+
+/* Global lock flags */
+
#define ACPI_GLOCK_PENDING 0x01 /* 00: Pending global lock ownership */
#define ACPI_GLOCK_OWNED 0x02 /* 01: Global lock is owned */
-/*
- * Common FACS - This is a version-independent FACS structure used for internal use only
- */
-struct acpi_common_facs {
- u32 *global_lock;
- u64 *firmware_waking_vector;
- u8 vector_width;
-};
-
/*******************************************************************************
*
* FADT - Fixed ACPI Description Table (Signature "FACP")
/* Fields common to all versions of the FADT */
-#define ACPI_FADT_COMMON \
- ACPI_TABLE_HEADER_DEF \
- u32 V1_firmware_ctrl; /* 32-bit physical address of FACS */ \
- u32 V1_dsdt; /* 32-bit physical address of DSDT */ \
- u8 reserved1; /* System Interrupt Model isn't used in ACPI 2.0*/ \
- u8 prefer_PM_profile; /* Conveys preferred power management profile to OSPM. */ \
- u16 sci_int; /* System vector of SCI interrupt */ \
- u32 smi_cmd; /* Port address of SMI command port */ \
- u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */ \
- u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */ \
- u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */ \
- u8 pstate_cnt; /* Processor performance state control*/ \
- u32 V1_pm1a_evt_blk; /* Port address of Power Mgt 1a Event Reg Blk */ \
- u32 V1_pm1b_evt_blk; /* Port address of Power Mgt 1b Event Reg Blk */ \
- u32 V1_pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */ \
- u32 V1_pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */ \
- u32 V1_pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */ \
- u32 V1_pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */ \
- u32 V1_gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */ \
- u32 V1_gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */ \
- u8 pm1_evt_len; /* Byte Length of ports at pm1_x_evt_blk */ \
- u8 pm1_cnt_len; /* Byte Length of ports at pm1_x_cnt_blk */ \
- u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */ \
- u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */ \
- u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */ \
- u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */ \
- u8 gpe1_base; /* Offset in gpe model where gpe1 events start */ \
- u8 cst_cnt; /* Support for the _CST object and C States change notification.*/ \
- u16 plvl2_lat; /* Worst case HW latency to enter/exit C2 state */ \
- u16 plvl3_lat; /* Worst case HW latency to enter/exit C3 state */ \
- u16 flush_size; /* Processor's memory cache line width, in bytes */ \
- u16 flush_stride; /* Number of flush strides that need to be read */ \
- u8 duty_offset; /* Processor's duty cycle index in processor's P_CNT reg*/ \
- u8 duty_width; /* Processor's duty cycle value bit width in P_CNT register.*/ \
- u8 day_alrm; /* Index to day-of-month alarm in RTC CMOS RAM */ \
- u8 mon_alrm; /* Index to month-of-year alarm in RTC CMOS RAM */ \
- u8 century; /* Index to century in RTC CMOS RAM */ \
- u16 iapc_boot_arch; /* IA-PC Boot Architecture Flags. See Table 5-10 for description*/ \
- u8 reserved2; /* Reserved, must be zero */
-
-/*
- * ACPI 2.0+ FADT
- */
-struct fadt_descriptor {
- ACPI_FADT_COMMON
- /* Flags (32 bits) */
- u8 wb_invd:1; /* 00: The wbinvd instruction works properly */
- u8 wb_invd_flush:1; /* 01: The wbinvd flushes but does not invalidate */
- u8 proc_c1:1; /* 02: All processors support C1 state */
- u8 plvl2_up:1; /* 03: C2 state works on MP system */
- u8 pwr_button:1; /* 04: Power button is handled as a generic feature */
- u8 sleep_button:1; /* 05: Sleep button is handled as a generic feature, or not present */
- u8 fixed_rTC:1; /* 06: RTC wakeup stat not in fixed register space */
- u8 rtcs4:1; /* 07: RTC wakeup stat not possible from S4 */
- u8 tmr_val_ext:1; /* 08: tmr_val is 32 bits 0=24-bits */
- u8 dock_cap:1; /* 09: Docking supported */
- u8 reset_reg_sup:1; /* 10: System reset via the FADT RESET_REG supported */
- u8 sealed_case:1; /* 11: No internal expansion capabilities and case is sealed */
- u8 headless:1; /* 12: No local video capabilities or local input devices */
- u8 cpu_sw_sleep:1; /* 13: Must execute native instruction after writing SLP_TYPx register */
-
- u8 pci_exp_wak:1; /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
- u8 use_platform_clock:1; /* 15: OSPM should use platform-provided timer (ACPI 3.0) */
- u8 S4rtc_sts_valid:1; /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
- u8 remote_power_on_capable:1; /* 17: System is compatible with remote power on (ACPI 3.0) */
- u8 force_apic_cluster_model:1; /* 18: All local APICs must use cluster model (ACPI 3.0) */
- u8 force_apic_physical_destination_mode:1; /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */
- u8:4; /* 20-23: Reserved, must be zero */
- u8 reserved3; /* 24-31: Reserved, must be zero */
-
- struct acpi_generic_address reset_register; /* Reset register address in GAS format */
+struct acpi_table_fadt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 facs; /* 32-bit physical address of FACS */
+ u32 dsdt; /* 32-bit physical address of DSDT */
+ u8 model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
+ u8 preferred_profile; /* Conveys preferred power management profile to OSPM. */
+ u16 sci_interrupt; /* System vector of SCI interrupt */
+ u32 smi_command; /* 32-bit Port address of SMI command port */
+ u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
+ u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
+ u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 pstate_control; /* Processor performance state control */
+ u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
+ u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
+ u32 pm1a_control_block; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
+ u32 pm1b_control_block; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
+ u32 pm2_control_block; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
+ u32 pm_timer_block; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
+ u32 gpe0_block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */
+ u32 gpe1_block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */
+ u8 pm1_event_length; /* Byte Length of ports at pm1x_event_block */
+ u8 pm1_control_length; /* Byte Length of ports at pm1x_control_block */
+ u8 pm2_control_length; /* Byte Length of ports at pm2_control_block */
+ u8 pm_timer_length; /* Byte Length of ports at pm_timer_block */
+ u8 gpe0_block_length; /* Byte Length of ports at gpe0_block */
+ u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
+ u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
+ u8 cst_control; /* Support for the _CST object and C States change notification */
+ u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
+ u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
+ u16 flush_size; /* Processor's memory cache line width, in bytes */
+ u16 flush_stride; /* Number of flush strides that need to be read */
+ u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
+ u8 duty_width; /* Processor duty cycle value bit width in P_CNT register. */
+ u8 day_alarm; /* Index to day-of-month alarm in RTC CMOS RAM */
+ u8 month_alarm; /* Index to month-of-year alarm in RTC CMOS RAM */
+ u8 century; /* Index to century in RTC CMOS RAM */
+ u16 boot_flags; /* IA-PC Boot Architecture Flags. See Table 5-10 for description */
+ u8 reserved; /* Reserved, must be zero */
+ u32 flags; /* Miscellaneous flag bits (see below for individual flags) */
+ struct acpi_generic_address reset_register; /* 64-bit address of the Reset register */
u8 reset_value; /* Value to write to the reset_register port to reset the system */
- u8 reserved4[3]; /* These three bytes must be zero */
- u64 xfirmware_ctrl; /* 64-bit physical address of FACS */
+ u8 reserved4[3]; /* Reserved, must be zero */
+ u64 Xfacs; /* 64-bit physical address of FACS */
u64 Xdsdt; /* 64-bit physical address of DSDT */
- struct acpi_generic_address xpm1a_evt_blk; /* Extended Power Mgt 1a acpi_event Reg Blk address */
- struct acpi_generic_address xpm1b_evt_blk; /* Extended Power Mgt 1b acpi_event Reg Blk address */
- struct acpi_generic_address xpm1a_cnt_blk; /* Extended Power Mgt 1a Control Reg Blk address */
- struct acpi_generic_address xpm1b_cnt_blk; /* Extended Power Mgt 1b Control Reg Blk address */
- struct acpi_generic_address xpm2_cnt_blk; /* Extended Power Mgt 2 Control Reg Blk address */
- struct acpi_generic_address xpm_tmr_blk; /* Extended Power Mgt Timer Ctrl Reg Blk address */
- struct acpi_generic_address xgpe0_blk; /* Extended General Purpose acpi_event 0 Reg Blk address */
- struct acpi_generic_address xgpe1_blk; /* Extended General Purpose acpi_event 1 Reg Blk address */
+ struct acpi_generic_address xpm1a_event_block; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
+ struct acpi_generic_address xpm1b_event_block; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
+ struct acpi_generic_address xpm1a_control_block; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
+ struct acpi_generic_address xpm1b_control_block; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
+ struct acpi_generic_address xpm2_control_block; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
+ struct acpi_generic_address xpm_timer_block; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
+ struct acpi_generic_address xgpe0_block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
+ struct acpi_generic_address xgpe1_block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
};
-/*
- * "Down-revved" ACPI 2.0 FADT descriptor
- * Defined here to allow compiler to generate the length of the struct
- */
-struct fadt_descriptor_rev2_minus {
- ACPI_FADT_COMMON u32 flags;
- struct acpi_generic_address reset_register; /* Reset register address in GAS format */
- u8 reset_value; /* Value to write to the reset_register port to reset the system. */
- u8 reserved7[3]; /* Reserved, must be zero */
-};
+/* FADT flags */
+
+#define ACPI_FADT_WBINVD (1) /* 00: The wbinvd instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: The wbinvd flushes but does not invalidate */
+#define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: All processors support C1 state */
+#define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: C2 state works on MP system */
+#define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: Power button is handled as a generic feature */
+#define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: Sleep button is handled as a generic feature, or not present */
+#define ACPI_FADT_FIXED_RTC (1<<6) /* 06: RTC wakeup stat not in fixed register space */
+#define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: RTC wakeup stat not possible from S4 */
+#define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: tmr_val is 32 bits 0=24-bits */
+#define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: Docking supported */
+#define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: System reset via the FADT RESET_REG supported */
+#define ACPI_FADT_SEALED_CASE (1<<11) /* 11: No internal expansion capabilities and case is sealed */
+#define ACPI_FADT_HEADLESS (1<<12) /* 12: No local video capabilities or local input devices */
+#define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: Must execute native instruction after writing SLP_TYPx register */
+#define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
+#define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: OSPM should use platform-provided timer (ACPI 3.0) */
+#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
+#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: System is compatible with remote power on (ACPI 3.0) */
+#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: All local APICs must use cluster model (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: All local x_aPICs must use physical dest mode (ACPI 3.0) */
/*
- * ACPI 1.0 FADT
- * Defined here to allow compiler to generate the length of the struct
+ * FADT Prefered Power Management Profiles
*/
-struct fadt_descriptor_rev1 {
- ACPI_FADT_COMMON u32 flags;
+enum acpi_prefered_pm_profiles {
+ PM_UNSPECIFIED = 0,
+ PM_DESKTOP = 1,
+ PM_MOBILE = 2,
+ PM_WORKSTATION = 3,
+ PM_ENTERPRISE_SERVER = 4,
+ PM_SOHO_SERVER = 5,
+ PM_APPLIANCE_PC = 6
};
-/* FADT: Prefered Power Management Profiles */
-
-#define PM_UNSPECIFIED 0
-#define PM_DESKTOP 1
-#define PM_MOBILE 2
-#define PM_WORKSTATION 3
-#define PM_ENTERPRISE_SERVER 4
-#define PM_SOHO_SERVER 5
-#define PM_APPLIANCE_PC 6
-
-/* FADT: Boot Arch Flags */
+/* FADT Boot Arch Flags */
#define BAF_LEGACY_DEVICES 0x0001
#define BAF_8042_KEYBOARD_CONTROLLER 0x0002
#pragma pack()
-/*
- * This macro is temporary until the table bitfield flag definitions
- * are removed and replaced by a Flags field.
- */
-#define ACPI_FLAG_OFFSET(d,f,o) (u8) (ACPI_OFFSET (d,f) + \
- sizeof(((d *)0)->f) + o)
-/*
- * Get the remaining ACPI tables
- */
-#include "actbl1.h"
+#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_fadt, f)
/*
- * ACPI Table information. We save the table address, length,
- * and type of memory allocation (mapped or allocated) for each
- * table for 1) when we exit, and 2) if a new table is installed
+ * Get the remaining ACPI tables
*/
-#define ACPI_MEM_NOT_ALLOCATED 0
-#define ACPI_MEM_ALLOCATED 1
-#define ACPI_MEM_MAPPED 2
-
-/* Definitions for the Flags bitfield member of struct acpi_table_support */
-
-#define ACPI_TABLE_SINGLE 0x00
-#define ACPI_TABLE_MULTIPLE 0x01
-#define ACPI_TABLE_EXECUTABLE 0x02
-
-#define ACPI_TABLE_ROOT 0x00
-#define ACPI_TABLE_PRIMARY 0x10
-#define ACPI_TABLE_SECONDARY 0x20
-#define ACPI_TABLE_ALL 0x30
-#define ACPI_TABLE_TYPE_MASK 0x30
-
-/* Data about each known table type */
-
-struct acpi_table_support {
- char *name;
- char *signature;
- void **global_ptr;
- u8 sig_length;
- u8 flags;
-};
-
-extern u8 acpi_fadt_is_v1; /* is set to 1 if FADT is revision 1,
- * needed for certain workarounds */
-/* Macros used to generate offsets to specific table fields */
-
-#define ACPI_FACS_OFFSET(f) (u8) ACPI_OFFSET (struct facs_descriptor,f)
-#define ACPI_FADT_OFFSET(f) (u8) ACPI_OFFSET (struct fadt_descriptor, f)
-#define ACPI_GAS_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_generic_address,f)
-#define ACPI_HDR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_header,f)
-#define ACPI_RSDP_OFFSET(f) (u8) ACPI_OFFSET (struct rsdp_descriptor,f)
-#define ACPI_FADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct fadt_descriptor,f,o)
-#define ACPI_FACS_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct facs_descriptor,f,o)
+#include <acpi/actbl1.h>
#endif /* __ACTBL_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ACPI_SIG_BOOT "BOOT" /* Simple Boot Flag Table */
#define ACPI_SIG_CPEP "CPEP" /* Corrected Platform Error Polling table */
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
+#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_ECDT "ECDT" /* Embedded Controller Boot Resources Table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
#define ACPI_SIG_MADT "APIC" /* Multiple APIC Description Table */
#define ACPI_SIG_TCPA "TCPA" /* Trusted Computing Platform Alliance table */
#define ACPI_SIG_WDRT "WDRT" /* Watchdog Resource Table */
-/* Legacy names */
-
-#define APIC_SIG "APIC" /* Multiple APIC Description Table */
-#define BOOT_SIG "BOOT" /* Simple Boot Flag Table */
-#define SBST_SIG "SBST" /* Smart Battery Specification Table */
-
/*
* All tables must be byte-packed to match the ACPI specification, since
* the tables are provided by the system BIOS.
* portable, so do not use any other bitfield types.
*/
+/* Common Sub-table header (used in MADT, SRAT, etc.) */
+
+struct acpi_subtable_header {
+ u8 type;
+ u8 length;
+};
+
/*******************************************************************************
*
* ASF - Alert Standard Format table (Signature "ASF!")
*
+ * Conforms to the Alert Standard Format Specification V2.0, 23 April 2003
+ *
******************************************************************************/
struct acpi_table_asf {
-ACPI_TABLE_HEADER_DEF};
+ struct acpi_table_header header; /* Common ACPI table header */
+};
-#define ACPI_ASF_HEADER_DEF \
- u8 type; \
- u8 reserved; \
- u16 length;
+/* ASF subtable header */
struct acpi_asf_header {
-ACPI_ASF_HEADER_DEF};
+ u8 type;
+ u8 reserved;
+ u16 length;
+};
-/* Values for Type field */
+/* Values for Type field above */
-#define ASF_INFO 0
-#define ASF_ALERT 1
-#define ASF_CONTROL 2
-#define ASF_BOOT 3
-#define ASF_ADDRESS 4
-#define ASF_RESERVED 5
+enum acpi_asf_type {
+ ACPI_ASF_TYPE_INFO = 0,
+ ACPI_ASF_TYPE_ALERT = 1,
+ ACPI_ASF_TYPE_CONTROL = 2,
+ ACPI_ASF_TYPE_BOOT = 3,
+ ACPI_ASF_TYPE_ADDRESS = 4,
+ ACPI_ASF_TYPE_RESERVED = 5
+};
/*
* ASF subtables
/* 0: ASF Information */
struct acpi_asf_info {
- ACPI_ASF_HEADER_DEF u8 min_reset_value;
+ struct acpi_asf_header header;
+ u8 min_reset_value;
u8 min_poll_interval;
u16 system_id;
u32 mfg_id;
/* 1: ASF Alerts */
struct acpi_asf_alert {
- ACPI_ASF_HEADER_DEF u8 assert_mask;
+ struct acpi_asf_header header;
+ u8 assert_mask;
u8 deassert_mask;
u8 alerts;
u8 data_length;
- u8 array[1];
+};
+
+struct acpi_asf_alert_data {
+ u8 address;
+ u8 command;
+ u8 mask;
+ u8 value;
+ u8 sensor_type;
+ u8 type;
+ u8 offset;
+ u8 source_type;
+ u8 severity;
+ u8 sensor_number;
+ u8 entity;
+ u8 instance;
};
/* 2: ASF Remote Control */
struct acpi_asf_remote {
- ACPI_ASF_HEADER_DEF u8 controls;
+ struct acpi_asf_header header;
+ u8 controls;
u8 data_length;
u16 reserved2;
- u8 array[1];
+};
+
+struct acpi_asf_control_data {
+ u8 function;
+ u8 address;
+ u8 command;
+ u8 value;
};
/* 3: ASF RMCP Boot Options */
struct acpi_asf_rmcp {
- ACPI_ASF_HEADER_DEF u8 capabilities[7];
+ struct acpi_asf_header header;
+ u8 capabilities[7];
u8 completion_code;
u32 enterprise_id;
u8 command;
/* 4: ASF Address */
struct acpi_asf_address {
- ACPI_ASF_HEADER_DEF u8 eprom_address;
+ struct acpi_asf_header header;
+ u8 eprom_address;
u8 devices;
- u8 smbus_addresses[1];
};
/*******************************************************************************
******************************************************************************/
struct acpi_table_boot {
- ACPI_TABLE_HEADER_DEF u8 cmos_index; /* Index in CMOS RAM for the boot register */
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 cmos_index; /* Index in CMOS RAM for the boot register */
u8 reserved[3];
};
******************************************************************************/
struct acpi_table_cpep {
- ACPI_TABLE_HEADER_DEF u64 reserved;
+ struct acpi_table_header header; /* Common ACPI table header */
+ u64 reserved;
};
/* Subtable */
struct acpi_cpep_polling {
u8 type;
u8 length;
- u8 processor_id; /* Processor ID */
- u8 processor_eid; /* Processor EID */
- u32 polling_interval; /* Polling interval (msec) */
+ u8 id; /* Processor ID */
+ u8 eid; /* Processor EID */
+ u32 interval; /* Polling interval (msec) */
};
/*******************************************************************************
******************************************************************************/
struct acpi_table_dbgp {
- ACPI_TABLE_HEADER_DEF u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 type; /* 0=full 16550, 1=subset of 16550 */
u8 reserved[3];
struct acpi_generic_address debug_port;
};
/*******************************************************************************
*
- * ECDT - Embedded Controller Boot Resources Table
+ * DMAR - DMA Remapping table
*
******************************************************************************/
-struct ec_boot_resources {
- ACPI_TABLE_HEADER_DEF struct acpi_generic_address ec_control; /* Address of EC command/status register */
- struct acpi_generic_address ec_data; /* Address of EC data register */
- u32 uid; /* Unique ID - must be same as the EC _UID method */
- u8 gpe_bit; /* The GPE for the EC */
- u8 ec_id[1]; /* Full namepath of the EC in the ACPI namespace */
+struct acpi_table_dmar {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 width; /* Host Address Width */
+ u8 reserved[11];
+};
+
+/* DMAR subtable header */
+
+struct acpi_dmar_header {
+ u16 type;
+ u16 length;
+ u8 flags;
+ u8 reserved[3];
+};
+
+/* Values for subtable type in struct acpi_dmar_header */
+
+enum acpi_dmar_type {
+ ACPI_DMAR_TYPE_HARDWARE_UNIT = 0,
+ ACPI_DMAR_TYPE_RESERVED_MEMORY = 1,
+ ACPI_DMAR_TYPE_RESERVED = 2 /* 2 and greater are reserved */
+};
+
+struct acpi_dmar_device_scope {
+ u8 entry_type;
+ u8 length;
+ u8 segment;
+ u8 bus;
+};
+
+/* Values for entry_type in struct acpi_dmar_device_scope */
+
+enum acpi_dmar_scope_type {
+ ACPI_DMAR_SCOPE_TYPE_NOT_USED = 0,
+ ACPI_DMAR_SCOPE_TYPE_ENDPOINT = 1,
+ ACPI_DMAR_SCOPE_TYPE_BRIDGE = 2,
+ ACPI_DMAR_SCOPE_TYPE_RESERVED = 3 /* 3 and greater are reserved */
+};
+
+/*
+ * DMAR Sub-tables, correspond to Type in struct acpi_dmar_header
+ */
+
+/* 0: Hardware Unit Definition */
+
+struct acpi_dmar_hardware_unit {
+ struct acpi_dmar_header header;
+ u64 address; /* Register Base Address */
+};
+
+/* Flags */
+
+#define ACPI_DMAR_INCLUDE_ALL (1)
+
+/* 1: Reserved Memory Defininition */
+
+struct acpi_dmar_reserved_memory {
+ struct acpi_dmar_header header;
+ u64 address; /* 4_k aligned base address */
+ u64 end_address; /* 4_k aligned limit address */
};
+/* Flags */
+
+#define ACPI_DMAR_ALLOW_ALL (1)
+
/*******************************************************************************
*
- * HPET - High Precision Event Timer table
+ * ECDT - Embedded Controller Boot Resources Table
*
******************************************************************************/
-struct acpi_hpet_table {
- ACPI_TABLE_HEADER_DEF u32 hardware_id; /* Hardware ID of event timer block */
- struct acpi_generic_address base_address; /* Address of event timer block */
- u8 hpet_number; /* HPET sequence number */
- u16 clock_tick; /* Main counter min tick, periodic mode */
- u8 attributes;
+struct acpi_table_ecdt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ struct acpi_generic_address control; /* Address of EC command/status register */
+ struct acpi_generic_address data; /* Address of EC data register */
+ u32 uid; /* Unique ID - must be same as the EC _UID method */
+ u8 gpe; /* The GPE for the EC */
+ u8 id[1]; /* Full namepath of the EC in the ACPI namespace */
};
-#if 0 /* HPET flags to be converted to macros */
-struct { /* Flags (8 bits) */
- u8 page_protect:1; /* 00: No page protection */
- u8 page_protect4:1; /* 01: 4_kB page protected */
- u8 page_protect64:1; /* 02: 64_kB page protected */
- u8:5; /* 03-07: Reserved, must be zero */
-} flags;
-#endif
-
/*******************************************************************************
*
- * MADT - Multiple APIC Description Table
+ * HPET - High Precision Event Timer table
*
******************************************************************************/
-struct multiple_apic_table {
- ACPI_TABLE_HEADER_DEF u32 local_apic_address; /* Physical address of local APIC */
-
- /* Flags (32 bits) */
-
- u8 PCATcompat:1; /* 00: System also has dual 8259s */
- u8:7; /* 01-07: Reserved, must be zero */
- u8 reserved1[3]; /* 08-31: Reserved, must be zero */
+struct acpi_table_hpet {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 id; /* Hardware ID of event timer block */
+ struct acpi_generic_address address; /* Address of event timer block */
+ u8 sequence; /* HPET sequence number */
+ u16 minimum_tick; /* Main counter min tick, periodic mode */
+ u8 flags;
};
-/* Values for MADT PCATCompat */
+/*! Flags */
-#define DUAL_PIC 0
-#define MULTIPLE_APIC 1
+#define ACPI_HPET_PAGE_PROTECT (1) /* 00: No page protection */
+#define ACPI_HPET_PAGE_PROTECT_4 (1<<1) /* 01: 4KB page protected */
+#define ACPI_HPET_PAGE_PROTECT_64 (1<<2) /* 02: 64KB page protected */
-/* Common MADT Sub-table header */
+/*! [End] no source code translation !*/
-#define APIC_HEADER_DEF \
- u8 type; \
- u8 length;
-
-struct apic_header {
-APIC_HEADER_DEF};
-
-/* Values for Type in struct apic_header */
+/*******************************************************************************
+ *
+ * MADT - Multiple APIC Description Table
+ *
+ ******************************************************************************/
-#define APIC_PROCESSOR 0
-#define APIC_IO 1
-#define APIC_XRUPT_OVERRIDE 2
-#define APIC_NMI 3
-#define APIC_LOCAL_NMI 4
-#define APIC_ADDRESS_OVERRIDE 5
-#define APIC_IO_SAPIC 6
-#define APIC_LOCAL_SAPIC 7
-#define APIC_XRUPT_SOURCE 8
-#define APIC_RESERVED 9 /* 9 and greater are reserved */
+struct acpi_table_madt {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 address; /* Physical address of local APIC */
+ u32 flags;
+};
-/* Flag definitions for MADT sub-tables */
+/* Flags */
-#define ACPI_MADT_IFLAGS /* INTI flags (16 bits) */ \
- u8 polarity : 2; /* 00-01: Polarity of APIC I/O input signals */\
- u8 trigger_mode : 2; /* 02-03: Trigger mode of APIC input signals */\
- u8 : 4; /* 04-07: Reserved, must be zero */\
- u8 reserved1; /* 08-15: Reserved, must be zero */
+#define ACPI_MADT_PCAT_COMPAT (1) /* 00: System also has dual 8259s */
-#define ACPI_MADT_LFLAGS /* Local Sapic flags (32 bits) */ \
- u8 processor_enabled: 1; /* 00: Processor is usable if set */\
- u8 : 7; /* 01-07: Reserved, must be zero */\
- u8 reserved2[3]; /* 08-31: Reserved, must be zero */
+/* Values for PCATCompat flag */
-/* Values for MPS INTI flags */
+#define ACPI_MADT_DUAL_PIC 0
+#define ACPI_MADT_MULTIPLE_APIC 1
-#define POLARITY_CONFORMS 0
-#define POLARITY_ACTIVE_HIGH 1
-#define POLARITY_RESERVED 2
-#define POLARITY_ACTIVE_LOW 3
+/* Values for subtable type in struct acpi_subtable_header */
-#define TRIGGER_CONFORMS 0
-#define TRIGGER_EDGE 1
-#define TRIGGER_RESERVED 2
-#define TRIGGER_LEVEL 3
+enum acpi_madt_type {
+ ACPI_MADT_TYPE_LOCAL_APIC = 0,
+ ACPI_MADT_TYPE_IO_APIC = 1,
+ ACPI_MADT_TYPE_INTERRUPT_OVERRIDE = 2,
+ ACPI_MADT_TYPE_NMI_SOURCE = 3,
+ ACPI_MADT_TYPE_LOCAL_APIC_NMI = 4,
+ ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE = 5,
+ ACPI_MADT_TYPE_IO_SAPIC = 6,
+ ACPI_MADT_TYPE_LOCAL_SAPIC = 7,
+ ACPI_MADT_TYPE_INTERRUPT_SOURCE = 8,
+ ACPI_MADT_TYPE_RESERVED = 9 /* 9 and greater are reserved */
+};
/*
- * MADT Sub-tables, correspond to Type in struct apic_header
+ * MADT Sub-tables, correspond to Type in struct acpi_subtable_header
*/
-/* 0: processor APIC */
+/* 0: Processor Local APIC */
-struct madt_processor_apic {
- APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
- u8 local_apic_id; /* Processor's local APIC id */
- ACPI_MADT_LFLAGS};
+struct acpi_madt_local_apic {
+ struct acpi_subtable_header header;
+ u8 processor_id; /* ACPI processor id */
+ u8 id; /* Processor's local APIC id */
+ u32 lapic_flags;
+};
/* 1: IO APIC */
-struct madt_io_apic {
- APIC_HEADER_DEF u8 io_apic_id; /* I/O APIC ID */
+struct acpi_madt_io_apic {
+ struct acpi_subtable_header header;
+ u8 id; /* I/O APIC ID */
u8 reserved; /* Reserved - must be zero */
u32 address; /* APIC physical address */
- u32 interrupt; /* Global system interrupt where INTI lines start */
+ u32 global_irq_base; /* Global system interrupt where INTI lines start */
};
/* 2: Interrupt Override */
-struct madt_interrupt_override {
- APIC_HEADER_DEF u8 bus; /* 0 - ISA */
- u8 source; /* Interrupt source (IRQ) */
- u32 interrupt; /* Global system interrupt */
- ACPI_MADT_IFLAGS};
+struct acpi_madt_interrupt_override {
+ struct acpi_subtable_header header;
+ u8 bus; /* 0 - ISA */
+ u8 source_irq; /* Interrupt source (IRQ) */
+ u32 global_irq; /* Global system interrupt */
+ u16 inti_flags;
+};
-/* 3: NMI Sources */
+/* 3: NMI Source */
-struct madt_nmi_source {
- APIC_HEADER_DEF ACPI_MADT_IFLAGS u32 interrupt; /* Global system interrupt */
+struct acpi_madt_nmi_source {
+ struct acpi_subtable_header header;
+ u16 inti_flags;
+ u32 global_irq; /* Global system interrupt */
};
/* 4: Local APIC NMI */
-struct madt_local_apic_nmi {
- APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
- ACPI_MADT_IFLAGS u8 lint; /* LINTn to which NMI is connected */
+struct acpi_madt_local_apic_nmi {
+ struct acpi_subtable_header header;
+ u8 processor_id; /* ACPI processor id */
+ u16 inti_flags;
+ u8 lint; /* LINTn to which NMI is connected */
};
/* 5: Address Override */
-struct madt_address_override {
- APIC_HEADER_DEF u16 reserved; /* Reserved, must be zero */
+struct acpi_madt_local_apic_override {
+ struct acpi_subtable_header header;
+ u16 reserved; /* Reserved, must be zero */
u64 address; /* APIC physical address */
};
/* 6: I/O Sapic */
-struct madt_io_sapic {
- APIC_HEADER_DEF u8 io_sapic_id; /* I/O SAPIC ID */
+struct acpi_madt_io_sapic {
+ struct acpi_subtable_header header;
+ u8 id; /* I/O SAPIC ID */
u8 reserved; /* Reserved, must be zero */
- u32 interrupt_base; /* Glocal interrupt for SAPIC start */
+ u32 global_irq_base; /* Global interrupt for SAPIC start */
u64 address; /* SAPIC physical address */
};
/* 7: Local Sapic */
-struct madt_local_sapic {
- APIC_HEADER_DEF u8 processor_id; /* ACPI processor id */
- u8 local_sapic_id; /* SAPIC ID */
- u8 local_sapic_eid; /* SAPIC EID */
+struct acpi_madt_local_sapic {
+ struct acpi_subtable_header header;
+ u8 processor_id; /* ACPI processor id */
+ u8 id; /* SAPIC ID */
+ u8 eid; /* SAPIC EID */
u8 reserved[3]; /* Reserved, must be zero */
- ACPI_MADT_LFLAGS u32 processor_uID; /* Numeric UID - ACPI 3.0 */
- char processor_uIDstring[1]; /* String UID - ACPI 3.0 */
+ u32 lapic_flags;
+ u32 uid; /* Numeric UID - ACPI 3.0 */
+ char uid_string[1]; /* String UID - ACPI 3.0 */
};
/* 8: Platform Interrupt Source */
-struct madt_interrupt_source {
- APIC_HEADER_DEF ACPI_MADT_IFLAGS u8 interrupt_type; /* 1=PMI, 2=INIT, 3=corrected */
- u8 processor_id; /* Processor ID */
- u8 processor_eid; /* Processor EID */
+struct acpi_madt_interrupt_source {
+ struct acpi_subtable_header header;
+ u16 inti_flags;
+ u8 type; /* 1=PMI, 2=INIT, 3=corrected */
+ u8 id; /* Processor ID */
+ u8 eid; /* Processor EID */
u8 io_sapic_vector; /* Vector value for PMI interrupts */
- u32 interrupt; /* Global system interrupt */
+ u32 global_irq; /* Global system interrupt */
u32 flags; /* Interrupt Source Flags */
};
-#ifdef DUPLICATE_DEFINITION_WITH_LINUX_ACPI_H
+/* Flags field above */
+
+#define ACPI_MADT_CPEI_OVERRIDE (1)
+
+/*
+ * Common flags fields for MADT subtables
+ */
+
+/* MADT Local APIC flags (lapic_flags) */
+
+#define ACPI_MADT_ENABLED (1) /* 00: Processor is usable if set */
+
+/* MADT MPS INTI flags (inti_flags) */
+
+#define ACPI_MADT_POLARITY_MASK (3) /* 00-01: Polarity of APIC I/O input signals */
+#define ACPI_MADT_TRIGGER_MASK (3<<2) /* 02-03: Trigger mode of APIC input signals */
+
+/* Values for MPS INTI flags */
+
+#define ACPI_MADT_POLARITY_CONFORMS 0
+#define ACPI_MADT_POLARITY_ACTIVE_HIGH 1
+#define ACPI_MADT_POLARITY_RESERVED 2
+#define ACPI_MADT_POLARITY_ACTIVE_LOW 3
+
+#define ACPI_MADT_TRIGGER_CONFORMS (0)
+#define ACPI_MADT_TRIGGER_EDGE (1<<2)
+#define ACPI_MADT_TRIGGER_RESERVED (2<<2)
+#define ACPI_MADT_TRIGGER_LEVEL (3<<2)
+
/*******************************************************************************
*
* MCFG - PCI Memory Mapped Configuration table and sub-table
******************************************************************************/
struct acpi_table_mcfg {
- ACPI_TABLE_HEADER_DEF u8 reserved[8];
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 reserved[8];
};
+/* Subtable */
+
struct acpi_mcfg_allocation {
- u64 base_address; /* Base address, processor-relative */
+ u64 address; /* Base address, processor-relative */
u16 pci_segment; /* PCI segment group number */
u8 start_bus_number; /* Starting PCI Bus number */
u8 end_bus_number; /* Final PCI Bus number */
u32 reserved;
};
-#endif
/*******************************************************************************
*
*
******************************************************************************/
-struct smart_battery_table {
- ACPI_TABLE_HEADER_DEF u32 warning_level;
+struct acpi_table_sbst {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 warning_level;
u32 low_level;
u32 critical_level;
};
*
******************************************************************************/
-struct system_locality_info {
- ACPI_TABLE_HEADER_DEF u64 locality_count;
- u8 entry[1][1];
+struct acpi_table_slit {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u64 locality_count;
+ u8 entry[1]; /* Real size = localities^2 */
};
/*******************************************************************************
******************************************************************************/
struct acpi_table_spcr {
- ACPI_TABLE_HEADER_DEF u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 interface_type; /* 0=full 16550, 1=subset of 16550 */
u8 reserved[3];
struct acpi_generic_address serial_port;
u8 interrupt_type;
u8 stop_bits;
u8 flow_control;
u8 terminal_type;
- u8 reserved2;
+ u8 reserved1;
u16 pci_device_id;
u16 pci_vendor_id;
u8 pci_bus;
u8 pci_function;
u32 pci_flags;
u8 pci_segment;
- u32 reserved3;
+ u32 reserved2;
};
/*******************************************************************************
******************************************************************************/
struct acpi_table_spmi {
- ACPI_TABLE_HEADER_DEF u8 reserved;
+ struct acpi_table_header header; /* Common ACPI table header */
+ u8 reserved;
u8 interface_type;
u16 spec_revision; /* Version of IPMI */
u8 interrupt_type;
u8 gpe_number; /* GPE assigned */
- u8 reserved2;
+ u8 reserved1;
u8 pci_device_flag;
u32 interrupt;
struct acpi_generic_address ipmi_register;
*
******************************************************************************/
-struct system_resource_affinity {
- ACPI_TABLE_HEADER_DEF u32 reserved1; /* Must be value '1' */
- u64 reserved2; /* Reserved, must be zero */
+struct acpi_table_srat {
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 table_revision; /* Must be value '1' */
+ u64 reserved; /* Reserved, must be zero */
};
-/* SRAT common sub-table header */
+/* Values for subtable type in struct acpi_subtable_header */
-#define SRAT_SUBTABLE_HEADER \
- u8 type; \
- u8 length;
-
-/* Values for Type above */
-
-#define SRAT_CPU_AFFINITY 0
-#define SRAT_MEMORY_AFFINITY 1
-#define SRAT_RESERVED 2
+enum acpi_srat_type {
+ ACPI_SRAT_TYPE_CPU_AFFINITY = 0,
+ ACPI_SRAT_TYPE_MEMORY_AFFINITY = 1,
+ ACPI_SRAT_TYPE_RESERVED = 2
+};
/* SRAT sub-tables */
-struct static_resource_alloc {
- SRAT_SUBTABLE_HEADER u8 proximity_domain_lo;
+struct acpi_srat_cpu_affinity {
+ struct acpi_subtable_header header;
+ u8 proximity_domain_lo;
u8 apic_id;
-
- /* Flags (32 bits) */
-
- u8 enabled:1; /* 00: Use affinity structure */
- u8:7; /* 01-07: Reserved, must be zero */
- u8 reserved3[3]; /* 08-31: Reserved, must be zero */
-
+ u32 flags;
u8 local_sapic_eid;
u8 proximity_domain_hi[3];
- u32 reserved4; /* Reserved, must be zero */
+ u32 reserved; /* Reserved, must be zero */
};
-struct memory_affinity {
- SRAT_SUBTABLE_HEADER u32 proximity_domain;
- u16 reserved3;
- u64 base_address;
- u64 address_length;
- u32 reserved4;
-
- /* Flags (32 bits) */
+/* Flags */
- u8 enabled:1; /* 00: Use affinity structure */
- u8 hot_pluggable:1; /* 01: Memory region is hot pluggable */
- u8 non_volatile:1; /* 02: Memory is non-volatile */
- u8:5; /* 03-07: Reserved, must be zero */
- u8 reserved5[3]; /* 08-31: Reserved, must be zero */
+#define ACPI_SRAT_CPU_ENABLED (1) /* 00: Use affinity structure */
- u64 reserved6; /* Reserved, must be zero */
+struct acpi_srat_mem_affinity {
+ struct acpi_subtable_header header;
+ u32 proximity_domain;
+ u16 reserved; /* Reserved, must be zero */
+ u64 base_address;
+ u64 length;
+ u32 memory_type; /* See acpi_address_range_id */
+ u32 flags;
+ u64 reserved1; /* Reserved, must be zero */
};
+/* Flags */
+
+#define ACPI_SRAT_MEM_ENABLED (1) /* 00: Use affinity structure */
+#define ACPI_SRAT_MEM_HOT_PLUGGABLE (1<<1) /* 01: Memory region is hot pluggable */
+#define ACPI_SRAT_MEM_NON_VOLATILE (1<<2) /* 02: Memory region is non-volatile */
+
/*******************************************************************************
*
* TCPA - Trusted Computing Platform Alliance table
******************************************************************************/
struct acpi_table_tcpa {
- ACPI_TABLE_HEADER_DEF u16 reserved;
+ struct acpi_table_header header; /* Common ACPI table header */
+ u16 reserved;
u32 max_log_length; /* Maximum length for the event log area */
u64 log_address; /* Address of the event log area */
};
******************************************************************************/
struct acpi_table_wdrt {
- ACPI_TABLE_HEADER_DEF u32 header_length; /* Watchdog Header Length */
+ struct acpi_table_header header; /* Common ACPI table header */
+ u32 header_length; /* Watchdog Header Length */
u8 pci_segment; /* PCI Segment number */
u8 pci_bus; /* PCI Bus number */
u8 pci_device; /* PCI Device number */
u32 entries; /* Number of watchdog entries that follow */
};
-#if 0 /* Flags, will be converted to macros */
-u8 enabled:1; /* 00: Timer enabled */
-u8:6; /* 01-06: Reserved */
-u8 sleep_stop:1; /* 07: Timer stopped in sleep state */
-#endif
-
-/* Macros used to generate offsets to specific table fields */
-
-#define ACPI_ASF0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_info,f)
-#define ACPI_ASF1_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_alert,f)
-#define ACPI_ASF2_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_remote,f)
-#define ACPI_ASF3_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_rmcp,f)
-#define ACPI_ASF4_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_asf_address,f)
-#define ACPI_BOOT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_boot,f)
-#define ACPI_CPEP_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_cpep,f)
-#define ACPI_CPEP0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_cpep_polling,f)
-#define ACPI_DBGP_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_dbgp,f)
-#define ACPI_ECDT_OFFSET(f) (u8) ACPI_OFFSET (struct ec_boot_resources,f)
-#define ACPI_HPET_OFFSET(f) (u8) ACPI_OFFSET (struct hpet_table,f)
-#define ACPI_MADT_OFFSET(f) (u8) ACPI_OFFSET (struct multiple_apic_table,f)
-#define ACPI_MADT0_OFFSET(f) (u8) ACPI_OFFSET (struct madt_processor_apic,f)
-#define ACPI_MADT1_OFFSET(f) (u8) ACPI_OFFSET (struct madt_io_apic,f)
-#define ACPI_MADT2_OFFSET(f) (u8) ACPI_OFFSET (struct madt_interrupt_override,f)
-#define ACPI_MADT3_OFFSET(f) (u8) ACPI_OFFSET (struct madt_nmi_source,f)
-#define ACPI_MADT4_OFFSET(f) (u8) ACPI_OFFSET (struct madt_local_apic_nmi,f)
-#define ACPI_MADT5_OFFSET(f) (u8) ACPI_OFFSET (struct madt_address_override,f)
-#define ACPI_MADT6_OFFSET(f) (u8) ACPI_OFFSET (struct madt_io_sapic,f)
-#define ACPI_MADT7_OFFSET(f) (u8) ACPI_OFFSET (struct madt_local_sapic,f)
-#define ACPI_MADT8_OFFSET(f) (u8) ACPI_OFFSET (struct madt_interrupt_source,f)
-#define ACPI_MADTH_OFFSET(f) (u8) ACPI_OFFSET (struct apic_header,f)
-#define ACPI_MCFG_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_mcfg,f)
-#define ACPI_MCFG0_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_mcfg_allocation,f)
-#define ACPI_SBST_OFFSET(f) (u8) ACPI_OFFSET (struct smart_battery_table,f)
-#define ACPI_SLIT_OFFSET(f) (u8) ACPI_OFFSET (struct system_locality_info,f)
-#define ACPI_SPCR_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_spcr,f)
-#define ACPI_SPMI_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_spmi,f)
-#define ACPI_SRAT_OFFSET(f) (u8) ACPI_OFFSET (struct system_resource_affinity,f)
-#define ACPI_SRAT0_OFFSET(f) (u8) ACPI_OFFSET (struct static_resource_alloc,f)
-#define ACPI_SRAT1_OFFSET(f) (u8) ACPI_OFFSET (struct memory_affinity,f)
-#define ACPI_TCPA_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_tcpa,f)
-#define ACPI_WDRT_OFFSET(f) (u8) ACPI_OFFSET (struct acpi_table_wdrt,f)
-
-#define ACPI_HPET_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct hpet_table,f,o)
-#define ACPI_SRAT0_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct static_resource_alloc,f,o)
-#define ACPI_SRAT1_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct memory_affinity,f,o)
-#define ACPI_MADT_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct multiple_apic_table,f,o)
-#define ACPI_MADT0_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_processor_apic,f,o)
-#define ACPI_MADT2_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_interrupt_override,f,o)
-#define ACPI_MADT3_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_nmi_source,f,o)
-#define ACPI_MADT4_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_local_apic_nmi,f,o)
-#define ACPI_MADT7_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_local_sapic,f,o)
-#define ACPI_MADT8_FLAG_OFFSET(f,o) ACPI_FLAG_OFFSET (struct madt_interrupt_source,f,o)
+/* Flags */
+
+#define ACPI_WDRT_TIMER_ENABLED (1) /* 00: Timer enabled */
/* Reset to default packing */
+++ /dev/null
-/******************************************************************************
- *
- * Name: actbl2.h - ACPI Specification Revision 2.0 Tables
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, this list of conditions, and the following disclaimer,
- * without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- * substantially similar to the "NO WARRANTY" disclaimer below
- * ("Disclaimer") and any redistribution must be conditioned upon
- * including a substantially similar Disclaimer requirement for further
- * binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- * of any contributors may be used to endorse or promote products derived
- * from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#ifndef __ACTBL2_H__
-#define __ACTBL2_H__
-
-/* Code moved to both actbl.h and actbl1.h */
-
-#endif /* __ACTBL2_H__ */
+++ /dev/null
-/******************************************************************************
- *
- * Name: actbl71.h - IA-64 Extensions to the ACPI Spec Rev. 0.71
- * This file includes tables specific to this
- * specification revision.
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2003, R. Byron Moore
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#ifndef __ACTBL71_H__
-#define __ACTBL71_H__
-
-/* 0.71 FADT address_space data item bitmasks defines */
-/* If the associated bit is zero then it is in memory space else in io space */
-
-#define SMI_CMD_ADDRESS_SPACE 0x01
-#define PM1_BLK_ADDRESS_SPACE 0x02
-#define PM2_CNT_BLK_ADDRESS_SPACE 0x04
-#define PM_TMR_BLK_ADDRESS_SPACE 0x08
-#define GPE0_BLK_ADDRESS_SPACE 0x10
-#define GPE1_BLK_ADDRESS_SPACE 0x20
-
-/* Only for clarity in declarations */
-
-typedef u64 IO_ADDRESS;
-
-#pragma pack(1)
-struct { /* Root System Descriptor Pointer */
- NATIVE_CHAR signature[8]; /* contains "RSD PTR " */
- u8 checksum; /* to make sum of struct == 0 */
- NATIVE_CHAR oem_id[6]; /* OEM identification */
- u8 reserved; /* Must be 0 for 1.0, 2 for 2.0 */
- u64 rsdt_physical_address; /* 64-bit physical address of RSDT */
-};
-
-/*****************************************/
-/* IA64 Extensions to ACPI Spec Rev 0.71 */
-/* for the Root System Description Table */
-/*****************************************/
-struct {
- struct acpi_table_header header; /* Table header */
- u32 reserved_pad; /* IA64 alignment, must be 0 */
- u64 table_offset_entry[1]; /* Array of pointers to other */
- /* tables' headers */
-};
-
-/*******************************************/
-/* IA64 Extensions to ACPI Spec Rev 0.71 */
-/* for the Firmware ACPI Control Structure */
-/*******************************************/
-struct {
- NATIVE_CHAR signature[4]; /* signature "FACS" */
- u32 length; /* length of structure, in bytes */
- u32 hardware_signature; /* hardware configuration signature */
- u32 reserved4; /* must be 0 */
- u64 firmware_waking_vector; /* ACPI OS waking vector */
- u64 global_lock; /* Global Lock */
- u32 S4bios_f:1; /* Indicates if S4BIOS support is present */
- u32 reserved1:31; /* must be 0 */
- u8 reserved3[28]; /* reserved - must be zero */
-};
-
-/******************************************/
-/* IA64 Extensions to ACPI Spec Rev 0.71 */
-/* for the Fixed ACPI Description Table */
-/******************************************/
-struct {
- struct acpi_table_header header; /* table header */
- u32 reserved_pad; /* IA64 alignment, must be 0 */
- u64 firmware_ctrl; /* 64-bit Physical address of FACS */
- u64 dsdt; /* 64-bit Physical address of DSDT */
- u8 model; /* System Interrupt Model */
- u8 address_space; /* Address Space Bitmask */
- u16 sci_int; /* System vector of SCI interrupt */
- u8 acpi_enable; /* value to write to smi_cmd to enable ACPI */
- u8 acpi_disable; /* value to write to smi_cmd to disable ACPI */
- u8 S4bios_req; /* Value to write to SMI CMD to enter S4BIOS state */
- u8 reserved2; /* reserved - must be zero */
- u64 smi_cmd; /* Port address of SMI command port */
- u64 pm1a_evt_blk; /* Port address of Power Mgt 1a acpi_event Reg Blk */
- u64 pm1b_evt_blk; /* Port address of Power Mgt 1b acpi_event Reg Blk */
- u64 pm1a_cnt_blk; /* Port address of Power Mgt 1a Control Reg Blk */
- u64 pm1b_cnt_blk; /* Port address of Power Mgt 1b Control Reg Blk */
- u64 pm2_cnt_blk; /* Port address of Power Mgt 2 Control Reg Blk */
- u64 pm_tmr_blk; /* Port address of Power Mgt Timer Ctrl Reg Blk */
- u64 gpe0_blk; /* Port addr of General Purpose acpi_event 0 Reg Blk */
- u64 gpe1_blk; /* Port addr of General Purpose acpi_event 1 Reg Blk */
- u8 pm1_evt_len; /* Byte length of ports at pm1_x_evt_blk */
- u8 pm1_cnt_len; /* Byte length of ports at pm1_x_cnt_blk */
- u8 pm2_cnt_len; /* Byte Length of ports at pm2_cnt_blk */
- u8 pm_tm_len; /* Byte Length of ports at pm_tm_blk */
- u8 gpe0_blk_len; /* Byte Length of ports at gpe0_blk */
- u8 gpe1_blk_len; /* Byte Length of ports at gpe1_blk */
- u8 gpe1_base; /* offset in gpe model where gpe1 events start */
- u8 reserved3; /* reserved */
- u16 plvl2_lat; /* worst case HW latency to enter/exit C2 state */
- u16 plvl3_lat; /* worst case HW latency to enter/exit C3 state */
- u8 day_alrm; /* index to day-of-month alarm in RTC CMOS RAM */
- u8 mon_alrm; /* index to month-of-year alarm in RTC CMOS RAM */
- u8 century; /* index to century in RTC CMOS RAM */
- u8 reserved4; /* reserved */
- u32 flush_cash:1; /* PAL_FLUSH_CACHE is correctly supported */
- u32 reserved5:1; /* reserved - must be zero */
- u32 proc_c1:1; /* all processors support C1 state */
- u32 plvl2_up:1; /* C2 state works on MP system */
- u32 pwr_button:1; /* Power button is handled as a generic feature */
- u32 sleep_button:1; /* Sleep button is handled as a generic feature, or not present */
- u32 fixed_rTC:1; /* RTC wakeup stat not in fixed register space */
- u32 rtcs4:1; /* RTC wakeup stat not possible from S4 */
- u32 tmr_val_ext:1; /* tmr_val is 32 bits */
- u32 dock_cap:1; /* Supports Docking */
- u32 reserved6:22; /* reserved - must be zero */
-};
-
-#pragma pack()
-
-#endif /* __ACTBL71_H__ */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
/*
* ACPI_MACHINE_WIDTH must be specified in an OS- or compiler-dependent header
- * and must be either 16, 32, or 64
+ * and must be either 32 or 64. 16-bit ACPICA is no longer supported, as of
+ * 12/2006.
*/
#ifndef ACPI_MACHINE_WIDTH
#error ACPI_MACHINE_WIDTH not defined
typedef u64 acpi_native_uint;
typedef s64 acpi_native_int;
-typedef u64 acpi_table_ptr;
typedef u64 acpi_io_address;
typedef u64 acpi_physical_address;
typedef u32 acpi_native_uint;
typedef s32 acpi_native_int;
-typedef u64 acpi_table_ptr;
typedef u32 acpi_io_address;
-typedef u64 acpi_physical_address;
+typedef u32 acpi_physical_address;
#define ACPI_MAX_PTR ACPI_UINT32_MAX
#define ACPI_SIZE_MAX ACPI_UINT32_MAX
-/*******************************************************************************
- *
- * Types specific to 16-bit targets
- *
- ******************************************************************************/
-
-#elif ACPI_MACHINE_WIDTH == 16
-
-/*! [Begin] no source code translation (keep the typedefs as-is) */
-
-typedef unsigned long UINT32;
-typedef short INT16;
-typedef long INT32;
-
-/*! [End] no source code translation !*/
-
-typedef u16 acpi_native_uint;
-typedef s16 acpi_native_int;
-
-typedef u32 acpi_table_ptr;
-typedef u32 acpi_io_address;
-typedef char *acpi_physical_address;
-
-#define ACPI_MAX_PTR ACPI_UINT16_MAX
-#define ACPI_SIZE_MAX ACPI_UINT16_MAX
-
-#define ACPI_USE_NATIVE_DIVIDE /* No 64-bit integers, ok to use native divide */
-
-/* 64-bit integers cannot be supported */
-
-#define ACPI_NO_INTEGER64_SUPPORT
-
#else
-/* ACPI_MACHINE_WIDTH must be either 64, 32, or 16 */
+/* ACPI_MACHINE_WIDTH must be either 64 or 32 */
#error unknown ACPI_MACHINE_WIDTH
#endif
*
******************************************************************************/
-/*
- * Pointer overlays to avoid lots of typecasting for
- * code that accepts both physical and logical pointers.
- */
-union acpi_pointers {
- acpi_physical_address physical;
- void *logical;
- acpi_table_ptr value;
-};
-
-struct acpi_pointer {
- u32 pointer_type;
- union acpi_pointers pointer;
-};
-
-/* pointer_types for above */
-
-#define ACPI_PHYSICAL_POINTER 0x01
-#define ACPI_LOGICAL_POINTER 0x02
-
-/* Processor mode */
-
-#define ACPI_PHYSICAL_ADDRESSING 0x04
-#define ACPI_LOGICAL_ADDRESSING 0x08
-#define ACPI_MEMORY_MODE 0x0C
-
-#define ACPI_PHYSMODE_PHYSPTR ACPI_PHYSICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
-#define ACPI_LOGMODE_PHYSPTR ACPI_LOGICAL_ADDRESSING | ACPI_PHYSICAL_POINTER
-#define ACPI_LOGMODE_LOGPTR ACPI_LOGICAL_ADDRESSING | ACPI_LOGICAL_POINTER
-
/* Logical defines and NULL */
#ifdef FALSE
/*
* Initialization state
*/
-#define ACPI_INITIALIZED_OK 0x01
+#define ACPI_SUBSYSTEM_INITIALIZE 0x01
+#define ACPI_INITIALIZED_OK 0x02
/*
* Power state values
#define ACPI_NOTIFY_BUS_MODE_MISMATCH (u8) 6
#define ACPI_NOTIFY_POWER_FAULT (u8) 7
-/*
- * Table types. These values are passed to the table related APIs
- */
-typedef u32 acpi_table_type;
-
-#define ACPI_TABLE_ID_RSDP (acpi_table_type) 0
-#define ACPI_TABLE_ID_DSDT (acpi_table_type) 1
-#define ACPI_TABLE_ID_FADT (acpi_table_type) 2
-#define ACPI_TABLE_ID_FACS (acpi_table_type) 3
-#define ACPI_TABLE_ID_PSDT (acpi_table_type) 4
-#define ACPI_TABLE_ID_SSDT (acpi_table_type) 5
-#define ACPI_TABLE_ID_XSDT (acpi_table_type) 6
-#define ACPI_TABLE_ID_MAX 6
-#define ACPI_NUM_TABLE_TYPES (ACPI_TABLE_ID_MAX+1)
-
/*
* Types associated with ACPI names and objects. The first group of
* values (up to ACPI_TYPE_EXTERNAL_MAX) correspond to the definition
* | | | +--- Type of dispatch -- to method, handler, or none
* | | +--- Enabled for runtime?
* | +--- Enabled for wake?
- * +--- System state when GPE ocurred (running/waking)
+ * +--- Unused
*/
#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01
#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01
#define ACPI_GPE_ENABLE_MASK (u8) 0x60 /* Both run/wake */
-#define ACPI_GPE_SYSTEM_MASK (u8) 0x80
-#define ACPI_GPE_SYSTEM_RUNNING (u8) 0x80
-#define ACPI_GPE_SYSTEM_WAKING (u8) 0x00
-
/*
* Flags for GPE and Lock interfaces
*/
#define ACPI_SYS_MODE_LEGACY 0x0002
#define ACPI_SYS_MODES_MASK 0x0003
-/*
- * ACPI Table Info. One per ACPI table _type_
- */
-struct acpi_table_info {
- u32 count;
-};
-
/*
* System info returned by acpi_get_system_info()
*/
u32 reserved2;
u32 debug_level;
u32 debug_layer;
- u32 num_table_types;
- struct acpi_table_info table_info[ACPI_TABLE_ID_MAX + 1];
};
/*
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
void acpi_ut_subsystem_shutdown(void);
-acpi_status acpi_ut_validate_fadt(void);
-
/*
* utclib - Local implementations of C library functions
*/
/*
* utmisc
*/
+const char *acpi_ut_validate_exception(acpi_status status);
+
u8 acpi_ut_is_aml_table(struct acpi_table_header *table);
acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id);
u8 acpi_ut_valid_acpi_name(u32 name);
-acpi_name acpi_ut_repair_name(acpi_name name);
+acpi_name acpi_ut_repair_name(char *name);
u8 acpi_ut_valid_acpi_char(char character, acpi_native_uint position);
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */
#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */
#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */
-#define ARGI_REGION_OR_FIELD 0x15 /* Used by LOAD op only */
+#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */
#define ARGI_DATAREFOBJ 0x16
/* Note: types above can expand to 0x1F maximum */
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2006, R. Byron Moore
+ * Copyright (C) 2000 - 2007, R. Byron Moore
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
#define IOBASE_ROOT_BUS 5
#define IOBASE_FROM_HOSE 0x10000
+extern struct pci_dev *isa_bridge;
+
#endif /* __ALPHA_PCI_H */
* Calling conventions:
*
* ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
- * ACPI_EXTERNAL_XFACE - External ACPI interfaces
+ * ACPI_EXTERNAL_XFACE - External ACPI interfaces
* ACPI_INTERNAL_XFACE - Internal ACPI interfaces
* ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
*/
int __acpi_acquire_global_lock(unsigned int *lock);
int __acpi_release_global_lock(unsigned int *lock);
-#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
-#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = __acpi_release_global_lock((unsigned int *) GLptr))
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = __acpi_release_global_lock(&facs->global_lock))
/*
* Math helper asm macros
static inline void check_acpi_pci(void) { }
#endif
-#ifdef CONFIG_ACPI
+#ifdef CONFIG_ACPI
extern int acpi_lapic;
extern int acpi_ioapic;
extern int acpi_noirq;
extern int acpi_disabled;
extern int acpi_ht;
extern int acpi_pci_disabled;
-static inline void disable_acpi(void)
-{
- acpi_disabled = 1;
+static inline void disable_acpi(void)
+{
+ acpi_disabled = 1;
acpi_ht = 0;
acpi_pci_disabled = 1;
acpi_noirq = 1;
#endif
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
-static inline void acpi_disable_pci(void)
+static inline void acpi_disable_pci(void)
{
- acpi_pci_disabled = 1;
+ acpi_pci_disabled = 1;
acpi_noirq_set();
}
extern int acpi_irq_balance_set(char *str);
#endif /*CONFIG_ACPI_SLEEP*/
-extern u8 x86_acpiid_to_apicid[];
-
#define ARCH_HAS_POWER_INIT 1
#endif /*__KERNEL__*/
#include <linux/acpi.h>
-static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name,
struct mpc_config_translation *translation)
{
Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
}
-static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m,
struct mpc_config_translation *translation)
{
}
char *productid)
{
if (mpc->mpc_oemptr) {
- struct mp_config_oemtable *oem_table =
+ struct mp_config_oemtable *oem_table =
(struct mp_config_oemtable *)mpc->mpc_oemptr;
if (!strncmp(oem, "UNISYS", 6))
return parse_unisys_oem((char *)oem_table);
}
#ifdef CONFIG_ACPI
+
static inline int es7000_check_dsdt(void)
{
- struct acpi_table_header *header = NULL;
- if(!acpi_get_table_header_early(ACPI_DSDT, &header))
- acpi_table_print(header, 0);
- if (!strncmp(header->oem_id, "UNISYS", 6))
+ struct acpi_table_header header;
+ memcpy(&header, 0, sizeof(struct acpi_table_header));
+ acpi_get_table_header(ACPI_SIG_DSDT, 0, &header);
+ if (!strncmp(header.oem_id, "UNISYS", 6))
return 1;
return 0;
}
/* Hook from generic ACPI tables.c */
static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
- unsigned long oem_addr;
+ unsigned long oem_addr;
if (!find_unisys_acpi_oem_table(&oem_addr)) {
if (es7000_check_dsdt())
return parse_unisys_oem((char *)oem_addr);
return old & 0x1;
}
-#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = ia64_acpi_acquire_global_lock((unsigned int *) GLptr))
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = ia64_acpi_acquire_global_lock(&facs->global_lock))
-#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = ia64_acpi_release_global_lock((unsigned int *) GLptr))
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = ia64_acpi_release_global_lock(&facs->global_lock))
#define acpi_disabled 0 /* ACPI always enabled on IA64 */
#define acpi_noirq 0 /* ACPI always enabled on IA64 */
extern int __initdata nid_to_pxm_map[MAX_NUMNODES];
#endif
-extern u16 ia64_acpiid_to_sapicid[];
-
/*
* Refer Intel ACPI _PDC support document for bit definitions
*/
#define free_dma(x)
+void dma_mark_clean(void *addr, size_t size);
+
#endif /* _ASM_IA64_DMA_H */
ESI_PROC_REENTRANT /* MP-safe and reentrant */
};
-extern int ia64_esi_init (void);
extern struct ia64_sal_retval esi_call_phys (void *, u64 *);
extern int ia64_esi_call(efi_guid_t, struct ia64_sal_retval *,
enum esi_proc_type,
struct pci_bus;
struct task_struct;
struct pci_dev;
+struct msi_desc;
typedef void ia64_mv_setup_t (char **);
typedef void ia64_mv_cpu_init_t (void);
typedef unsigned int ia64_mv_readl_relaxed_t (const volatile void __iomem *);
typedef unsigned long ia64_mv_readq_relaxed_t (const volatile void __iomem *);
-typedef int ia64_mv_setup_msi_irq_t (unsigned int irq, struct pci_dev *pdev);
+typedef int ia64_mv_setup_msi_irq_t (struct pci_dev *pdev, struct msi_desc *);
typedef void ia64_mv_teardown_msi_irq_t (unsigned int irq);
static inline void
#define IGNORE_PFN0 1 /* XXX fix me: ignore pfn 0 until TLB miss handler is updated... */
+extern int register_active_ranges(u64 start, u64 end, void *arg);
+
#ifdef CONFIG_VIRTUAL_MEM_MAP
# define LARGE_GAP 0x40000000 /* Use virtual mem map if hole is > than this */
extern unsigned long vmalloc_end;
extern struct page *vmem_map;
extern int find_largest_hole (u64 start, u64 end, void *arg);
- extern int register_active_ranges (u64 start, u64 end, void *arg);
extern int create_mem_map_page_table (u64 start, u64 end, void *arg);
extern int vmemmap_find_next_valid_pfn(int, int);
#else
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long addr)
{
- return virt_to_page(pgtable_quicklist_alloc());
+ void *pg = pgtable_quicklist_alloc();
+ return pg ? virt_to_page(pg) : NULL;
}
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
#include "acpi/acglobal.h"
-#define SN_ACPI_BASE_SUPPORT() (acpi_gbl_DSDT->oem_revision >= 0x20101)
+extern int sn_acpi_rev;
+#define SN_ACPI_BASE_SUPPORT() (sn_acpi_rev >= 0x20101)
#endif /* _ASM_IA64_SN_ACPI_H */
extern void pcibr_ate_free(struct pcibus_info *, int);
extern void ate_write(struct pcibus_info *, int, int, u64);
extern int sal_pcibr_slot_enable(struct pcibus_info *soft, int device,
- void *resp);
+ void *resp, char **ssdt);
extern int sal_pcibr_slot_disable(struct pcibus_info *soft, int device,
int action, void *resp);
extern u16 sn_ioboard_to_pci_bus(struct pci_bus *pci_bus);
struct sn_irq_info *sn_irq_info);
extern void sn_irq_unfixup(struct pci_dev *pci_dev);
extern struct pcidev_info * sn_pcidev_info_get(struct pci_dev *);
+extern void sn_bus_fixup(struct pci_bus *);
+extern void sn_acpi_bus_fixup(struct pci_bus *);
+extern void sn_common_bus_fixup(struct pci_bus *, struct pcibus_bussoft *);
extern void sn_bus_store_sysdata(struct pci_dev *dev);
extern void sn_bus_free_sysdata(void);
extern void sn_generate_path(struct pci_bus *pci_bus, char *address);
-extern void sn_pci_fixup_slot(struct pci_dev *dev);
+extern void sn_io_slot_fixup(struct pci_dev *);
+extern void sn_acpi_slot_fixup(struct pci_dev *);
+extern void sn_pci_fixup_slot(struct pci_dev *dev, struct pcidev_info *,
+ struct sn_irq_info *);
extern void sn_pci_unfixup_slot(struct pci_dev *dev);
extern void sn_irq_lh_init(void);
#endif /* _ASM_IA64_SN_PCI_PCIDEV_H */
--- /dev/null
+#ifndef _ASM_SWIOTLB_H
+#define _ASM_SWIOTLB_H 1
+
+#include <asm/machvec.h>
+
+#define SWIOTLB_ARCH_NEED_LATE_INIT
+#define SWIOTLB_ARCH_NEED_ALLOC
+
+#endif /* _ASM_SWIOTLB_H */
#define TIF_NEED_RESCHED 2 /* rescheduling necessary */
#define TIF_SYSCALL_TRACE 3 /* syscall trace active */
#define TIF_SYSCALL_AUDIT 4 /* syscall auditing active */
+#define TIF_SINGLESTEP 5 /* restore singlestep on return to user mode */
#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling TIF_NEED_RESCHED */
#define TIF_MEMDIE 17
#define TIF_MCA_INIT 18 /* this task is processing MCA or INIT */
#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
-#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT)
+#define _TIF_SINGLESTEP (1 << TIF_SINGLESTEP)
+#define _TIF_SYSCALL_TRACEAUDIT (_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SINGLESTEP)
#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
#define __NR_sync_file_range 1300
#define __NR_tee 1301
#define __NR_vmsplice 1302
+/* 1303 reserved for move_pages */
+#define __NR_getcpu 1304
#ifdef __KERNEL__
-#define NR_syscalls 279 /* length of syscall table */
+#define NR_syscalls 281 /* length of syscall table */
#define __ARCH_WANT_SYS_RT_SIGACTION
extern void add_memory_region(phys_t start, phys_t size, long type);
extern void prom_init(void);
+extern void prom_free_prom_memory(void);
+
+extern void free_init_pages(const char *what,
+ unsigned long begin, unsigned long end);
/*
* Initial kernel command line, usually setup by prom_init()
#ifndef __ASM_DDB5XXX_DDB5477_H
#define __ASM_DDB5XXX_DDB5477_H
+#include <irq.h>
/*
* This contains macros that are specific to DDB5477 or renamed from
*/
#define NUM_CPU_IRQ 8
-#define NUM_I8259_IRQ 16
#define NUM_VRC5477_IRQ 32
-#define DDB_IRQ_BASE 0
-
-#define I8259_IRQ_BASE DDB_IRQ_BASE
-#define VRC5477_IRQ_BASE (I8259_IRQ_BASE + NUM_I8259_IRQ)
-#define CPU_IRQ_BASE (VRC5477_IRQ_BASE + NUM_VRC5477_IRQ)
+#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define VRC5477_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ)
/*
* vrc5477 irq defs
/*
* i2859 irq assignment
*/
-#define I8259_IRQ_RESERVED_0 (0 + I8259_IRQ_BASE)
-#define I8259_IRQ_KEYBOARD (1 + I8259_IRQ_BASE) /* M1543 default */
-#define I8259_IRQ_CASCADE (2 + I8259_IRQ_BASE)
-#define I8259_IRQ_UART_B (3 + I8259_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */
-#define I8259_IRQ_UART_A (4 + I8259_IRQ_BASE) /* M1543 default */
-#define I8259_IRQ_PARALLEL (5 + I8259_IRQ_BASE) /* M1543 default */
-#define I8259_IRQ_RESERVED_6 (6 + I8259_IRQ_BASE)
-#define I8259_IRQ_RESERVED_7 (7 + I8259_IRQ_BASE)
-#define I8259_IRQ_RTC (8 + I8259_IRQ_BASE) /* who set this? */
-#define I8259_IRQ_USB (9 + I8259_IRQ_BASE) /* ddb_setup */
-#define I8259_IRQ_PMU (10 + I8259_IRQ_BASE) /* ddb_setup */
-#define I8259_IRQ_RESERVED_11 (11 + I8259_IRQ_BASE)
-#define I8259_IRQ_RESERVED_12 (12 + I8259_IRQ_BASE) /* m1543_irq_setup */
-#define I8259_IRQ_RESERVED_13 (13 + I8259_IRQ_BASE)
-#define I8259_IRQ_HDC1 (14 + I8259_IRQ_BASE) /* default and ddb_setup */
-#define I8259_IRQ_HDC2 (15 + I8259_IRQ_BASE) /* default */
+#define I8259_IRQ_RESERVED_0 (0 + I8259A_IRQ_BASE)
+#define I8259_IRQ_KEYBOARD (1 + I8259A_IRQ_BASE) /* M1543 default */
+#define I8259_IRQ_CASCADE (2 + I8259A_IRQ_BASE)
+#define I8259_IRQ_UART_B (3 + I8259A_IRQ_BASE) /* M1543 default, may conflict with RTC according to schematic diagram */
+#define I8259_IRQ_UART_A (4 + I8259A_IRQ_BASE) /* M1543 default */
+#define I8259_IRQ_PARALLEL (5 + I8259A_IRQ_BASE) /* M1543 default */
+#define I8259_IRQ_RESERVED_6 (6 + I8259A_IRQ_BASE)
+#define I8259_IRQ_RESERVED_7 (7 + I8259A_IRQ_BASE)
+#define I8259_IRQ_RTC (8 + I8259A_IRQ_BASE) /* who set this? */
+#define I8259_IRQ_USB (9 + I8259A_IRQ_BASE) /* ddb_setup */
+#define I8259_IRQ_PMU (10 + I8259A_IRQ_BASE) /* ddb_setup */
+#define I8259_IRQ_RESERVED_11 (11 + I8259A_IRQ_BASE)
+#define I8259_IRQ_RESERVED_12 (12 + I8259A_IRQ_BASE) /* m1543_irq_setup */
+#define I8259_IRQ_RESERVED_13 (13 + I8259A_IRQ_BASE)
+#define I8259_IRQ_HDC1 (14 + I8259A_IRQ_BASE) /* default and ddb_setup */
+#define I8259_IRQ_HDC2 (15 + I8259A_IRQ_BASE) /* default */
/*
#ifndef __ASM_DEC_INTERRUPTS_H
#define __ASM_DEC_INTERRUPTS_H
+#include <irq.h>
#include <asm/mipsregs.h>
#define DEC_CPU_INR_SW1 1 /* software #1 */
#define DEC_CPU_INR_SW0 0 /* software #0 */
-#define DEC_CPU_IRQ_BASE 0 /* first IRQ assigned to CPU */
+#define DEC_CPU_IRQ_BASE MIPS_CPU_IRQ_BASE /* first IRQ assigned to CPU */
#define DEC_CPU_IRQ_NR(n) ((n) + DEC_CPU_IRQ_BASE)
#define DEC_CPU_IRQ_MASK(n) (1 << ((n) + CAUSEB_IP))
#else
#define MAX_DMA_ADDRESS (PAGE_OFFSET + 0x01000000)
#endif
+#define MAX_DMA_PFN PFN_DOWN(virt_to_phys((void *)MAX_DMA_ADDRESS))
/* 8237 DMA controllers */
#define IO_DMA1_BASE 0x00 /* 8 bit slave DMA, channels 0..3 */
#ifndef __ASM_EMMA2RH_EMMA2RH_H
#define __ASM_EMMA2RH_EMMA2RH_H
+#include <irq.h>
+
/*
* EMMA2RH registers
*/
#define NUM_EMMA2RH_IRQ 96
#define CPU_EMMA2RH_CASCADE 2
-#define EMMA2RH_IRQ_BASE 0
+#define CPU_IRQ_BASE MIPS_CPU_IRQ_BASE
+#define EMMA2RH_IRQ_BASE (CPU_IRQ_BASE + NUM_CPU_IRQ)
/*
* emma2rh irq defs
#define EMMA2RH_SW_IRQ_BASE (EMMA2RH_IRQ_BASE + NUM_EMMA2RH_IRQ)
#define EMMA2RH_GPIO_IRQ_BASE (EMMA2RH_SW_IRQ_BASE + NUM_EMMA2RH_IRQ_SW)
-#define CPU_IRQ_BASE (EMMA2RH_GPIO_IRQ_BASE + NUM_EMMA2RH_IRQ_GPIO)
#define EMMA2RH_SW_IRQ_INT0 (0+EMMA2RH_SW_IRQ_BASE)
#define EMMA2RH_SW_IRQ_INT1 (1+EMMA2RH_SW_IRQ_BASE)
#include <linux/spinlock.h>
#include <asm/io.h>
+#include <irq.h>
/* i8259A PIC registers */
#define PIC_MASTER_CMD 0x20
extern void init_i8259_irqs(void);
-#define I8259A_IRQ_BASE 0
-
/*
* Do the traditional i8259 interrupt polling thing. This is for the few
* cases where no better interrupt acknowledge method is available and we
*/
static inline unsigned long virt_to_phys(volatile const void *address)
{
- return (unsigned long)address - PAGE_OFFSET;
+ return (unsigned long)address - PAGE_OFFSET + PHYS_OFFSET;
}
/*
*/
static inline void * phys_to_virt(unsigned long address)
{
- return (void *)(address + PAGE_OFFSET);
+ return (void *)(address + PAGE_OFFSET - PHYS_OFFSET);
}
/*
#ifdef CONFIG_I8259
static inline int irq_canonicalize(int irq)
{
- return ((irq == 2) ? 9 : irq);
+ return ((irq == I8259A_IRQ_BASE + 2) ? I8259A_IRQ_BASE + 9 : irq);
}
#else
#define irq_canonicalize(irq) (irq) /* Sane hardware, sane code ... */
#ifndef _ASM_IRQ_CPU_H
#define _ASM_IRQ_CPU_H
-extern void mips_cpu_irq_init(int irq_base);
-extern void rm7k_cpu_irq_init(int irq_base);
-extern void rm9k_cpu_irq_init(int irq_base);
+extern void mips_cpu_irq_init(void);
+extern void rm7k_cpu_irq_init(void);
+extern void rm9k_cpu_irq_init(void);
#endif /* _ASM_IRQ_CPU_H */
#ifndef _LANGUAGE_ASSEMBLY
#include <linux/delay.h>
+#include <linux/types.h>
#include <asm/io.h>
/* cpu pipeline flush */
#ifndef __ASM_COBALT_H
#define __ASM_COBALT_H
+#include <irq.h>
+
/*
* i8259 legacy interrupts used on Cobalt:
*
/*
* CPU IRQs are 16 ... 23
*/
-#define COBALT_CPU_IRQ 16
+#define COBALT_CPU_IRQ MIPS_CPU_IRQ_BASE
#define COBALT_GALILEO_IRQ (COBALT_CPU_IRQ + 2)
#define COBALT_SCC_IRQ (COBALT_CPU_IRQ + 3) /* pre-production has 85C30 */
#define NR_IRQS 256
+#include_next <irq.h>
+
#endif /* __ASM_MACH_EMMA2RH_IRQ_H */
#ifndef __ASM_MACH_GENERIC_IRQ_H
#define __ASM_MACH_GENERIC_IRQ_H
+#ifndef NR_IRQS
#define NR_IRQS 128
+#endif
+
+#ifdef CONFIG_I8259
+#ifndef I8259A_IRQ_BASE
+#define I8259A_IRQ_BASE 0
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU
+
+#ifndef MIPS_CPU_IRQ_BASE
+#ifdef CONFIG_I8259
+#define MIPS_CPU_IRQ_BASE 16
+#else
+#define MIPS_CPU_IRQ_BASE 0
+#endif /* CONFIG_I8259 */
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM7K
+#ifndef RM7K_CPU_IRQ_BASE
+#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
+#endif
+#endif
+
+#ifdef CONFIG_IRQ_CPU_RM9K
+#ifndef RM9K_CPU_IRQ_BASE
+#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
+#endif
+#endif
+
+#endif /* CONFIG_IRQ_CPU */
#endif /* __ASM_MACH_GENERIC_IRQ_H */
#define NR_IRQS 256
+#include_next <irq.h>
+
#endif /* __ASM_MACH_MIPS_IRQ_H */
--- /dev/null
+#ifndef __ASM_MACH_VR41XX_IRQ_H
+#define __ASM_MACH_VR41XX_IRQ_H
+
+#include <asm/vr41xx/irq.h> /* for MIPS_CPU_IRQ_BASE */
+#ifdef CONFIG_NEC_CMBVR4133
+#include <asm/vr41xx/cmbvr4133.h> /* for I8259A_IRQ_BASE */
+#endif
+
+#include_next <irq.h>
+
+#endif /* __ASM_MACH_VR41XX_IRQ_H */
#ifndef _MIPS_ATLASINT_H
#define _MIPS_ATLASINT_H
+#include <irq.h>
+
/*
* Interrupts 0..7 are used for Atlas CPU interrupts (nonEIC mode)
*/
-#define MIPSCPU_INT_BASE 0
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
#ifndef _MIPS_MALTAINT_H
#define _MIPS_MALTAINT_H
+#include <irq.h>
+
/*
* Interrupts 0..15 are used for Malta ISA compatible interrupts
*/
/*
* Interrupts 16..23 are used for Malta CPU interrupts (nonEIC mode)
*/
-#define MIPSCPU_INT_BASE 16
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
/* CPU interrupt offsets */
#define MIPSCPU_INT_SW0 0
extern void prom_init_cmdline(void);
extern void prom_meminit(void);
extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-extern unsigned long prom_free_prom_memory (void);
extern void mips_display_message(const char *str);
extern void mips_display_word(unsigned int num);
extern int get_ethernet_addr(char *ethernet_addr);
#ifndef _MIPS_SEADINT_H
#define _MIPS_SEADINT_H
+#include <irq.h>
+
/*
* Interrupts 0..7 are used for SEAD CPU interrupts
*/
-#define MIPSCPU_INT_BASE 0
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPSCPU_INT_UART0 2
#define MIPSCPU_INT_UART1 3
#ifndef _MIPS_SIMINT_H
#define _MIPS_SIMINT_H
+#include <irq.h>
#define SIM_INT_BASE 0
#define MIPSCPU_INT_MB0 2
-#define MIPSCPU_INT_BASE 16
+#define MIPSCPU_INT_BASE MIPS_CPU_IRQ_BASE
#define MIPS_CPU_TIMER_IRQ 7
#ifndef __ASSEMBLY__
-extern void mips_mt_regdump(unsigned long previous_mvpcontrol_value);
-
static inline unsigned int dvpe(void)
{
int res = 0;
#ifndef __ASSEMBLY__
+/*
+ * This gives the physical RAM offset.
+ */
+#ifndef PHYS_OFFSET
+#define PHYS_OFFSET 0UL
+#endif
+
+/*
+ * It's normally defined only for FLATMEM config but it's
+ * used in our early mem init code for all memory models.
+ * So always define it.
+ */
+#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET)
+
#include <linux/pfn.h>
#include <asm/io.h>
/* to align the pointer to the (next) page boundary */
#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK)
+/*
+ * __pa()/__va() should be used only during mem init.
+ */
#if defined(CONFIG_64BIT) && !defined(CONFIG_BUILD_ELF64)
#define __pa_page_offset(x) ((unsigned long)(x) < CKSEG0 ? PAGE_OFFSET : CKSEG0)
#else
#define __pa_page_offset(x) PAGE_OFFSET
#endif
-#define __pa(x) ((unsigned long)(x) - __pa_page_offset(x))
-#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x),0))
-#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET))
+#define __pa(x) ((unsigned long)(x) - __pa_page_offset(x) + PHYS_OFFSET)
+#define __va(x) ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+#define __pa_symbol(x) __pa(RELOC_HIDE((unsigned long)(x),0))
#define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
#ifdef CONFIG_FLATMEM
-#define pfn_valid(pfn) ((pfn) < max_mapnr)
+#define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && (pfn) < max_mapnr)
#elif defined(CONFIG_SPARSEMEM)
#ifndef __ASM_RTLX_H
#define __ASM_RTLX_H_
+#include <irq.h>
+
#define LX_NODE_BASE 10
-#define MIPSCPU_INT_BASE 16
#define MIPS_CPU_RTLX_IRQ 0
#define RTLX_VERSION 2
#include <asm-generic/sections.h>
-extern char _fdata;
-
#endif /* _ASM_SECTIONS_H */
* HAL2 driver). This will prevent many complications, trust me ;-)
*/
+#include <irq.h>
#include <asm/sgi/ioc.h>
#define SGINT_EISA 0 /* 16 EISA irq levels (Indigo2) */
-#define SGINT_CPU 16 /* MIPS CPU define 8 interrupt sources */
-#define SGINT_LOCAL0 24 /* 8 local0 irq levels */
-#define SGINT_LOCAL1 32 /* 8 local1 irq levels */
-#define SGINT_LOCAL2 40 /* 8 local2 vectored irq levels */
-#define SGINT_LOCAL3 48 /* 8 local3 vectored irq levels */
-#define SGINT_END 56 /* End of 'spaces' */
+#define SGINT_CPU MIPS_CPU_IRQ_BASE /* MIPS CPU define 8 interrupt sources */
+#define SGINT_LOCAL0 (SGINT_CPU+8) /* 8 local0 irq levels */
+#define SGINT_LOCAL1 (SGINT_CPU+16) /* 8 local1 irq levels */
+#define SGINT_LOCAL2 (SGINT_CPU+24) /* 8 local2 vectored irq levels */
+#define SGINT_LOCAL3 (SGINT_CPU+32) /* 8 local3 vectored irq levels */
+#define SGINT_END (SGINT_CPU+40) /* End of 'spaces' */
/*
* Individual interrupt definitions for the Indy and Indigo2
int depth;
};
-extern struct smtc_ipi_q IPIQ[NR_CPUS];
-extern struct smtc_ipi_q freeIPIq;
-
static inline void smtc_ipi_nq(struct smtc_ipi_q *q, struct smtc_ipi *p)
{
long flags;
})
/*
- * __copy_from_user: - Copy a block of data from user space, with less checking. * @to: Destination address, in kernel space.
+ * __copy_from_user: - Copy a block of data from user space, with less checking.
+ * @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
#define CMBVR41XX_INTD_IRQ GIU_IRQ(CMBVR41XX_INTD_PIN)
#define CMBVR41XX_INTE_IRQ GIU_IRQ(CMBVR41XX_INTE_PIN)
-#define I8259_IRQ_BASE 72
-#define I8259_IRQ(x) (I8259_IRQ_BASE + (x))
+#define I8259A_IRQ_BASE 72
+#define I8259_IRQ(x) (I8259A_IRQ_BASE + (x))
#define TIMER_IRQ I8259_IRQ(0)
#define KEYBOARD_IRQ I8259_IRQ(1)
#define I8259_SLAVE_IRQ I8259_IRQ(2)
#define AUX_IRQ I8259_IRQ(12)
#define IDE_PRIMARY_IRQ I8259_IRQ(14)
#define IDE_SECONDARY_IRQ I8259_IRQ(15)
-#define I8259_IRQ_LAST IDE_SECONDARY_IRQ
#endif /* __NEC_CMBVR4133_H */
#include <linux/types.h>
#include <linux/sched.h>
+#define PSW32_MASK_PER 0x40000000UL
+#define PSW32_MASK_DAT 0x04000000UL
+#define PSW32_MASK_IO 0x02000000UL
+#define PSW32_MASK_EXT 0x01000000UL
+#define PSW32_MASK_KEY 0x00F00000UL
+#define PSW32_MASK_MCHECK 0x00040000UL
+#define PSW32_MASK_WAIT 0x00020000UL
+#define PSW32_MASK_PSTATE 0x00010000UL
+#define PSW32_MASK_ASC 0x0000C000UL
+#define PSW32_MASK_CC 0x00003000UL
+#define PSW32_MASK_PM 0x00000f00UL
+
+#define PSW32_ADDR_AMODE31 0x80000000UL
+#define PSW32_ADDR_INSN 0x7FFFFFFFUL
+
+#define PSW32_BASE_BITS 0x00080000UL
+
+#define PSW32_ASC_PRIMARY 0x00000000UL
+#define PSW32_ASC_ACCREG 0x00004000UL
+#define PSW32_ASC_SECONDARY 0x00008000UL
+#define PSW32_ASC_HOME 0x0000C000UL
+
+#define PSW32_MASK_MERGE(CURRENT,NEW) \
+ (((CURRENT) & ~(PSW32_MASK_CC|PSW32_MASK_PM)) | \
+ ((NEW) & (PSW32_MASK_CC|PSW32_MASK_PM)))
+
+extern long psw32_user_bits;
+
#define COMPAT_USER_HZ 100
typedef u32 compat_size_t;
--- /dev/null
+/*
+ * include/asm-s390/etr.h
+ *
+ * Copyright IBM Corp. 2006
+ * Author(s): Martin Schwidefsky (schwidefsky@de.ibm.com)
+ */
+#ifndef __S390_ETR_H
+#define __S390_ETR_H
+
+/* ETR attachment control register */
+struct etr_eacr {
+ unsigned int e0 : 1; /* port 0 stepping control */
+ unsigned int e1 : 1; /* port 1 stepping control */
+ unsigned int _pad0 : 5; /* must be 00100 */
+ unsigned int dp : 1; /* data port control */
+ unsigned int p0 : 1; /* port 0 change recognition control */
+ unsigned int p1 : 1; /* port 1 change recognition control */
+ unsigned int _pad1 : 3; /* must be 000 */
+ unsigned int ea : 1; /* ETR alert control */
+ unsigned int es : 1; /* ETR sync check control */
+ unsigned int sl : 1; /* switch to local control */
+} __attribute__ ((packed));
+
+/* Port state returned by steai */
+enum etr_psc {
+ etr_psc_operational = 0,
+ etr_psc_semi_operational = 1,
+ etr_psc_protocol_error = 4,
+ etr_psc_no_symbols = 8,
+ etr_psc_no_signal = 12,
+ etr_psc_pps_mode = 13
+};
+
+/* Logical port state returned by stetr */
+enum etr_lpsc {
+ etr_lpsc_operational_step = 0,
+ etr_lpsc_operational_alt = 1,
+ etr_lpsc_semi_operational = 2,
+ etr_lpsc_protocol_error = 4,
+ etr_lpsc_no_symbol_sync = 8,
+ etr_lpsc_no_signal = 12,
+ etr_lpsc_pps_mode = 13
+};
+
+/* ETR status words */
+struct etr_esw {
+ struct etr_eacr eacr; /* attachment control register */
+ unsigned int y : 1; /* stepping mode */
+ unsigned int _pad0 : 5; /* must be 00000 */
+ unsigned int p : 1; /* stepping port number */
+ unsigned int q : 1; /* data port number */
+ unsigned int psc0 : 4; /* port 0 state code */
+ unsigned int psc1 : 4; /* port 1 state code */
+} __attribute__ ((packed));
+
+/* Second level data register status word */
+struct etr_slsw {
+ unsigned int vv1 : 1; /* copy of validity bit data frame 1 */
+ unsigned int vv2 : 1; /* copy of validity bit data frame 2 */
+ unsigned int vv3 : 1; /* copy of validity bit data frame 3 */
+ unsigned int vv4 : 1; /* copy of validity bit data frame 4 */
+ unsigned int _pad0 : 19; /* must by all zeroes */
+ unsigned int n : 1; /* EAF port number */
+ unsigned int v1 : 1; /* validity bit ETR data frame 1 */
+ unsigned int v2 : 1; /* validity bit ETR data frame 2 */
+ unsigned int v3 : 1; /* validity bit ETR data frame 3 */
+ unsigned int v4 : 1; /* validity bit ETR data frame 4 */
+ unsigned int _pad1 : 4; /* must be 0000 */
+} __attribute__ ((packed));
+
+/* ETR data frames */
+struct etr_edf1 {
+ unsigned int u : 1; /* untuned bit */
+ unsigned int _pad0 : 1; /* must be 0 */
+ unsigned int r : 1; /* service request bit */
+ unsigned int _pad1 : 4; /* must be 0000 */
+ unsigned int a : 1; /* time adjustment bit */
+ unsigned int net_id : 8; /* ETR network id */
+ unsigned int etr_id : 8; /* id of ETR which sends data frames */
+ unsigned int etr_pn : 8; /* port number of ETR output port */
+} __attribute__ ((packed));
+
+struct etr_edf2 {
+ unsigned int etv : 32; /* Upper 32 bits of TOD. */
+} __attribute__ ((packed));
+
+struct etr_edf3 {
+ unsigned int rc : 8; /* failure reason code */
+ unsigned int _pad0 : 3; /* must be 000 */
+ unsigned int c : 1; /* ETR coupled bit */
+ unsigned int tc : 4; /* ETR type code */
+ unsigned int blto : 8; /* biased local time offset */
+ /* (blto - 128) * 15 = minutes */
+ unsigned int buo : 8; /* biased utc offset */
+ /* (buo - 128) = leap seconds */
+} __attribute__ ((packed));
+
+struct etr_edf4 {
+ unsigned int ed : 8; /* ETS device dependent data */
+ unsigned int _pad0 : 1; /* must be 0 */
+ unsigned int buc : 5; /* biased ut1 correction */
+ /* (buc - 16) * 0.1 seconds */
+ unsigned int em : 6; /* ETS error magnitude */
+ unsigned int dc : 6; /* ETS drift code */
+ unsigned int sc : 6; /* ETS steering code */
+} __attribute__ ((packed));
+
+/*
+ * ETR attachment information block, two formats
+ * format 1 has 4 reserved words with a size of 64 bytes
+ * format 2 has 16 reserved words with a size of 96 bytes
+ */
+struct etr_aib {
+ struct etr_esw esw;
+ struct etr_slsw slsw;
+ unsigned long long tsp;
+ struct etr_edf1 edf1;
+ struct etr_edf2 edf2;
+ struct etr_edf3 edf3;
+ struct etr_edf4 edf4;
+ unsigned int reserved[16];
+} __attribute__ ((packed,aligned(8)));
+
+/* ETR interruption parameter */
+struct etr_interruption_parameter {
+ unsigned int _pad0 : 8;
+ unsigned int pc0 : 1; /* port 0 state change */
+ unsigned int pc1 : 1; /* port 1 state change */
+ unsigned int _pad1 : 3;
+ unsigned int eai : 1; /* ETR alert indication */
+ unsigned int _pad2 : 18;
+} __attribute__ ((packed));
+
+/* Query TOD offset result */
+struct etr_ptff_qto {
+ unsigned long long physical_clock;
+ unsigned long long tod_offset;
+ unsigned long long logical_tod_offset;
+ unsigned long long tod_epoch_difference;
+} __attribute__ ((packed));
+
+/* Inline assembly helper functions */
+static inline int etr_setr(struct etr_eacr *ctrl)
+{
+ int rc = -ENOSYS;
+
+ asm volatile(
+ " .insn s,0xb2160000,0(%2)\n"
+ "0: la %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+d" (rc) : "m" (*ctrl), "a" (ctrl));
+ return rc;
+}
+
+/* Stores a format 1 aib with 64 bytes */
+static inline int etr_stetr(struct etr_aib *aib)
+{
+ int rc = -ENOSYS;
+
+ asm volatile(
+ " .insn s,0xb2170000,0(%2)\n"
+ "0: la %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+d" (rc) : "m" (*aib), "a" (aib));
+ return rc;
+}
+
+/* Stores a format 2 aib with 96 bytes for specified port */
+static inline int etr_steai(struct etr_aib *aib, unsigned int func)
+{
+ register unsigned int reg0 asm("0") = func;
+ int rc = -ENOSYS;
+
+ asm volatile(
+ " .insn s,0xb2b30000,0(%2)\n"
+ "0: la %0,0\n"
+ "1:\n"
+ EX_TABLE(0b,1b)
+ : "+d" (rc) : "m" (*aib), "a" (aib), "d" (reg0));
+ return rc;
+}
+
+/* Function codes for the steai instruction. */
+#define ETR_STEAI_STEPPING_PORT 0x10
+#define ETR_STEAI_ALTERNATE_PORT 0x11
+#define ETR_STEAI_PORT_0 0x12
+#define ETR_STEAI_PORT_1 0x13
+
+static inline int etr_ptff(void *ptff_block, unsigned int func)
+{
+ register unsigned int reg0 asm("0") = func;
+ register unsigned long reg1 asm("1") = (unsigned long) ptff_block;
+ int rc = -ENOSYS;
+
+ asm volatile(
+ " .word 0x0104\n"
+ " ipm %0\n"
+ " srl %0,28\n"
+ : "=d" (rc), "=m" (ptff_block)
+ : "d" (reg0), "d" (reg1), "m" (ptff_block) : "cc");
+ return rc;
+}
+
+/* Function codes for the ptff instruction. */
+#define ETR_PTFF_QAF 0x00 /* query available functions */
+#define ETR_PTFF_QTO 0x01 /* query tod offset */
+#define ETR_PTFF_QSI 0x02 /* query steering information */
+#define ETR_PTFF_ATO 0x40 /* adjust tod offset */
+#define ETR_PTFF_STO 0x41 /* set tod offset */
+#define ETR_PTFF_SFS 0x42 /* set fine steering rate */
+#define ETR_PTFF_SGS 0x43 /* set gross steering rate */
+
+/* Functions needed by the machine check handler */
+extern void etr_switch_to_local(void);
+extern void etr_sync_check(void);
+
+#endif /* __S390_ETR_H */
#define HARDIRQ_BITS 8
-extern void account_ticks(void);
+extern void account_ticks(u64 time);
#endif /* __ASM_HARDIRQ_H */
{
unsigned long real_address;
asm volatile(
-#ifndef __s390x__
" lra %0,0(%1)\n"
-#else /* __s390x__ */
- " lrag %0,0(%1)\n"
-#endif /* __s390x__ */
" jz 0f\n"
" la %0,0\n"
"0:"
extern int unregister_page_fault_notifier(struct notifier_block *);
extern struct atomic_notifier_head s390die_chain;
-
enum die_val {
DIE_OOPS = 1,
DIE_BPT,
return atomic_notifier_call_chain(&s390die_chain, val, &args);
}
+extern void die(const char *, struct pt_regs *, long);
+
#endif
__u32 kernel_asce; /* 0xc4c */
__u32 user_asce; /* 0xc50 */
__u32 panic_stack; /* 0xc54 */
- __u8 pad10[0xc60-0xc58]; /* 0xc58 */
+ __u32 user_exec_asce; /* 0xc58 */
+ __u8 pad10[0xc60-0xc5c]; /* 0xc5c */
/* entry.S sensitive area start */
struct cpuinfo_S390 cpu_data; /* 0xc60 */
__u32 ipl_device; /* 0xc7c */
__u64 kernel_asce; /* 0xd58 */
__u64 user_asce; /* 0xd60 */
__u64 panic_stack; /* 0xd68 */
- __u8 pad10[0xd80-0xd70]; /* 0xd70 */
+ __u64 user_exec_asce; /* 0xd70 */
+ __u8 pad10[0xd80-0xd78]; /* 0xd78 */
/* entry.S sensitive area start */
struct cpuinfo_S390 cpu_data; /* 0xd80 */
__u32 ipl_device; /* 0xdb8 */
#ifndef __S390_MMU_CONTEXT_H
#define __S390_MMU_CONTEXT_H
+#include <asm/pgalloc.h>
/*
* get a new mmu context.. S390 don't know about contexts.
*/
#define destroy_context(mm) do { } while (0)
+#ifndef __s390x__
+#define LCTL_OPCODE "lctl"
+#define PGTABLE_BITS (_SEGMENT_TABLE|USER_STD_MASK)
+#else
+#define LCTL_OPCODE "lctlg"
+#define PGTABLE_BITS (_REGION_TABLE|USER_STD_MASK)
+#endif
+
static inline void enter_lazy_tlb(struct mm_struct *mm,
struct task_struct *tsk)
{
}
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
- struct task_struct *tsk)
+ struct task_struct *tsk)
{
- if (prev != next) {
-#ifndef __s390x__
- S390_lowcore.user_asce = (__pa(next->pgd)&PAGE_MASK) |
- (_SEGMENT_TABLE|USER_STD_MASK);
- /* Load home space page table origin. */
- asm volatile("lctl 13,13,%0"
- : : "m" (S390_lowcore.user_asce) );
-#else /* __s390x__ */
- S390_lowcore.user_asce = (__pa(next->pgd) & PAGE_MASK) |
- (_REGION_TABLE|USER_STD_MASK);
- /* Load home space page table origin. */
- asm volatile("lctlg 13,13,%0"
- : : "m" (S390_lowcore.user_asce) );
-#endif /* __s390x__ */
- }
+ pgd_t *shadow_pgd = get_shadow_pgd(next->pgd);
+
+ if (prev != next) {
+ S390_lowcore.user_asce = (__pa(next->pgd) & PAGE_MASK) |
+ PGTABLE_BITS;
+ if (shadow_pgd) {
+ /* Load primary/secondary space page table origin. */
+ S390_lowcore.user_exec_asce =
+ (__pa(shadow_pgd) & PAGE_MASK) | PGTABLE_BITS;
+ asm volatile(LCTL_OPCODE" 1,1,%0\n"
+ LCTL_OPCODE" 7,7,%1"
+ : : "m" (S390_lowcore.user_exec_asce),
+ "m" (S390_lowcore.user_asce) );
+ } else if (switch_amode) {
+ /* Load primary space page table origin. */
+ asm volatile(LCTL_OPCODE" 1,1,%0"
+ : : "m" (S390_lowcore.user_asce) );
+ } else
+ /* Load home space page table origin. */
+ asm volatile(LCTL_OPCODE" 13,13,%0"
+ : : "m" (S390_lowcore.user_asce) );
+ }
cpu_set(smp_processor_id(), next->cpu_vm_mask);
}
set_fs(current->thread.mm_segment);
}
-#endif
+#endif /* __S390_MMU_CONTEXT_H */
if (!pgd)
return NULL;
+ if (s390_noexec) {
+ pgd_t *shadow_pgd = (pgd_t *)
+ __get_free_pages(GFP_KERNEL, PGD_ALLOC_ORDER);
+ struct page *page = virt_to_page(pgd);
+
+ if (!shadow_pgd) {
+ free_pages((unsigned long) pgd, PGD_ALLOC_ORDER);
+ return NULL;
+ }
+ page->lru.next = (void *) shadow_pgd;
+ }
for (i = 0; i < PTRS_PER_PGD; i++)
#ifndef __s390x__
pmd_clear(pmd_offset(pgd + i, i*PGDIR_SIZE));
static inline void pgd_free(pgd_t *pgd)
{
+ pgd_t *shadow_pgd = get_shadow_pgd(pgd);
+
+ if (shadow_pgd)
+ free_pages((unsigned long) shadow_pgd, PGD_ALLOC_ORDER);
free_pages((unsigned long) pgd, PGD_ALLOC_ORDER);
}
#define pmd_free(x) do { } while (0)
#define __pmd_free_tlb(tlb,x) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
+#define pgd_populate_kernel(mm, pmd, pte) BUG()
#else /* __s390x__ */
static inline pmd_t * pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
{
if (!pmd)
return NULL;
+ if (s390_noexec) {
+ pmd_t *shadow_pmd = (pmd_t *)
+ __get_free_pages(GFP_KERNEL, PMD_ALLOC_ORDER);
+ struct page *page = virt_to_page(pmd);
+
+ if (!shadow_pmd) {
+ free_pages((unsigned long) pmd, PMD_ALLOC_ORDER);
+ return NULL;
+ }
+ page->lru.next = (void *) shadow_pmd;
+ }
for (i=0; i < PTRS_PER_PMD; i++)
pmd_clear(pmd + i);
return pmd;
static inline void pmd_free (pmd_t *pmd)
{
+ pmd_t *shadow_pmd = get_shadow_pmd(pmd);
+
+ if (shadow_pmd)
+ free_pages((unsigned long) shadow_pmd, PMD_ALLOC_ORDER);
free_pages((unsigned long) pmd, PMD_ALLOC_ORDER);
}
pmd_free(pmd); \
} while (0)
-static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+static inline void
+pgd_populate_kernel(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
{
pgd_val(*pgd) = _PGD_ENTRY | __pa(pmd);
}
+static inline void pgd_populate(struct mm_struct *mm, pgd_t *pgd, pmd_t *pmd)
+{
+ pgd_t *shadow_pgd = get_shadow_pgd(pgd);
+ pmd_t *shadow_pmd = get_shadow_pmd(pmd);
+
+ if (shadow_pgd && shadow_pmd)
+ pgd_populate_kernel(mm, shadow_pgd, shadow_pmd);
+ pgd_populate_kernel(mm, pgd, pmd);
+}
+
#endif /* __s390x__ */
static inline void
static inline void
pmd_populate(struct mm_struct *mm, pmd_t *pmd, struct page *page)
{
- pmd_populate_kernel(mm, pmd, (pte_t *)page_to_phys(page));
+ pte_t *pte = (pte_t *)page_to_phys(page);
+ pmd_t *shadow_pmd = get_shadow_pmd(pmd);
+ pte_t *shadow_pte = get_shadow_pte(pte);
+
+ pmd_populate_kernel(mm, pmd, pte);
+ if (shadow_pmd && shadow_pte)
+ pmd_populate_kernel(mm, shadow_pmd, shadow_pte);
}
/*
if (!pte)
return NULL;
+ if (s390_noexec) {
+ pte_t *shadow_pte = (pte_t *)
+ __get_free_page(GFP_KERNEL|__GFP_REPEAT);
+ struct page *page = virt_to_page(pte);
+
+ if (!shadow_pte) {
+ free_page((unsigned long) pte);
+ return NULL;
+ }
+ page->lru.next = (void *) shadow_pte;
+ }
for (i=0; i < PTRS_PER_PTE; i++) {
pte_clear(mm, vmaddr, pte + i);
vmaddr += PAGE_SIZE;
static inline void pte_free_kernel(pte_t *pte)
{
- free_page((unsigned long) pte);
+ pte_t *shadow_pte = get_shadow_pte(pte);
+
+ if (shadow_pte)
+ free_page((unsigned long) shadow_pte);
+ free_page((unsigned long) pte);
}
static inline void pte_free(struct page *pte)
{
- __free_page(pte);
+ struct page *shadow_page = get_shadow_page(pte);
+
+ if (shadow_page)
+ __free_page(shadow_page);
+ __free_page(pte);
}
-#define __pte_free_tlb(tlb,pte) tlb_remove_page(tlb,pte)
+#define __pte_free_tlb(tlb, pte) \
+({ \
+ struct mmu_gather *__tlb = (tlb); \
+ struct page *__pte = (pte); \
+ struct page *shadow_page = get_shadow_page(__pte); \
+ if (shadow_page) \
+ tlb_remove_page(__tlb, shadow_page); \
+ tlb_remove_page(__tlb, __pte); \
+})
#endif /* _S390_PGALLOC_H */
extern pgd_t swapper_pg_dir[] __attribute__ ((aligned (4096)));
extern void paging_init(void);
+extern void vmem_map_init(void);
/*
* The S390 doesn't have any external MMU info: the kernel page
#define _PAGE_TYPE_FILE 0x601 /* bit 0x002 is used for offset !! */
#define _PAGE_TYPE_RO 0x200
#define _PAGE_TYPE_RW 0x000
+#define _PAGE_TYPE_EX_RO 0x202
+#define _PAGE_TYPE_EX_RW 0x002
/*
* PTE type bits are rather complicated. handle_pte_fault uses pte_present,
* _PAGE_TYPE_FILE 11?1 -> 11?1
* _PAGE_TYPE_RO 0100 -> 1100
* _PAGE_TYPE_RW 0000 -> 1000
+ * _PAGE_TYPE_EX_RO 0110 -> 1110
+ * _PAGE_TYPE_EX_RW 0010 -> 1010
*
- * pte_none is true for bits combinations 1000, 1100
+ * pte_none is true for bits combinations 1000, 1010, 1100, 1110
* pte_present is true for bits combinations 0000, 0010, 0100, 0110, 1001
* pte_file is true for bits combinations 1101, 1111
- * swap pte is 1011 and 0001, 0011, 0101, 0111, 1010 and 1110 are invalid.
+ * swap pte is 1011 and 0001, 0011, 0101, 0111 are invalid.
*/
#ifndef __s390x__
#define PAGE_NONE __pgprot(_PAGE_TYPE_NONE)
#define PAGE_RO __pgprot(_PAGE_TYPE_RO)
#define PAGE_RW __pgprot(_PAGE_TYPE_RW)
+#define PAGE_EX_RO __pgprot(_PAGE_TYPE_EX_RO)
+#define PAGE_EX_RW __pgprot(_PAGE_TYPE_EX_RW)
#define PAGE_KERNEL PAGE_RW
#define PAGE_COPY PAGE_RO
/*
- * The S390 can't do page protection for execute, and considers that the
- * same are read. Also, write permissions imply read permissions. This is
- * the closest we can get..
+ * Dependent on the EXEC_PROTECT option s390 can do execute protection.
+ * Write permission always implies read permission. In theory with a
+ * primary/secondary page table execute only can be implemented but
+ * it would cost an additional bit in the pte to distinguish all the
+ * different pte types. To avoid that execute permission currently
+ * implies read permission as well.
*/
/*xwr*/
#define __P000 PAGE_NONE
#define __P001 PAGE_RO
#define __P010 PAGE_RO
#define __P011 PAGE_RO
-#define __P100 PAGE_RO
-#define __P101 PAGE_RO
-#define __P110 PAGE_RO
-#define __P111 PAGE_RO
+#define __P100 PAGE_EX_RO
+#define __P101 PAGE_EX_RO
+#define __P110 PAGE_EX_RO
+#define __P111 PAGE_EX_RO
#define __S000 PAGE_NONE
#define __S001 PAGE_RO
#define __S010 PAGE_RW
#define __S011 PAGE_RW
-#define __S100 PAGE_RO
-#define __S101 PAGE_RO
-#define __S110 PAGE_RW
-#define __S111 PAGE_RW
+#define __S100 PAGE_EX_RO
+#define __S101 PAGE_EX_RO
+#define __S110 PAGE_EX_RW
+#define __S111 PAGE_EX_RW
+
+#ifndef __s390x__
+# define PMD_SHADOW_SHIFT 1
+# define PGD_SHADOW_SHIFT 1
+#else /* __s390x__ */
+# define PMD_SHADOW_SHIFT 2
+# define PGD_SHADOW_SHIFT 2
+#endif /* __s390x__ */
+
+static inline struct page *get_shadow_page(struct page *page)
+{
+ if (s390_noexec && !list_empty(&page->lru))
+ return virt_to_page(page->lru.next);
+ return NULL;
+}
+
+static inline pte_t *get_shadow_pte(pte_t *ptep)
+{
+ unsigned long pteptr = (unsigned long) (ptep);
+
+ if (s390_noexec) {
+ unsigned long offset = pteptr & (PAGE_SIZE - 1);
+ void *addr = (void *) (pteptr ^ offset);
+ struct page *page = virt_to_page(addr);
+ if (!list_empty(&page->lru))
+ return (pte_t *) ((unsigned long) page->lru.next |
+ offset);
+ }
+ return NULL;
+}
+
+static inline pmd_t *get_shadow_pmd(pmd_t *pmdp)
+{
+ unsigned long pmdptr = (unsigned long) (pmdp);
+
+ if (s390_noexec) {
+ unsigned long offset = pmdptr &
+ ((PAGE_SIZE << PMD_SHADOW_SHIFT) - 1);
+ void *addr = (void *) (pmdptr ^ offset);
+ struct page *page = virt_to_page(addr);
+ if (!list_empty(&page->lru))
+ return (pmd_t *) ((unsigned long) page->lru.next |
+ offset);
+ }
+ return NULL;
+}
+
+static inline pgd_t *get_shadow_pgd(pgd_t *pgdp)
+{
+ unsigned long pgdptr = (unsigned long) (pgdp);
+
+ if (s390_noexec) {
+ unsigned long offset = pgdptr &
+ ((PAGE_SIZE << PGD_SHADOW_SHIFT) - 1);
+ void *addr = (void *) (pgdptr ^ offset);
+ struct page *page = virt_to_page(addr);
+ if (!list_empty(&page->lru))
+ return (pgd_t *) ((unsigned long) page->lru.next |
+ offset);
+ }
+ return NULL;
+}
/*
* Certain architectures need to do special things when PTEs
*/
static inline void set_pte(pte_t *pteptr, pte_t pteval)
{
+ pte_t *shadow_pte = get_shadow_pte(pteptr);
+
*pteptr = pteval;
+ if (shadow_pte) {
+ if (!(pte_val(pteval) & _PAGE_INVALID) &&
+ (pte_val(pteval) & _PAGE_SWX))
+ pte_val(*shadow_pte) = pte_val(pteval) | _PAGE_RO;
+ else
+ pte_val(*shadow_pte) = _PAGE_TYPE_EMPTY;
+ }
}
#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval)
static inline void pgd_clear(pgd_t * pgdp) { }
-static inline void pmd_clear(pmd_t * pmdp)
+static inline void pmd_clear_kernel(pmd_t * pmdp)
{
pmd_val(pmdp[0]) = _PAGE_TABLE_INV;
pmd_val(pmdp[1]) = _PAGE_TABLE_INV;
pmd_val(pmdp[3]) = _PAGE_TABLE_INV;
}
+static inline void pmd_clear(pmd_t * pmdp)
+{
+ pmd_t *shadow_pmd = get_shadow_pmd(pmdp);
+
+ pmd_clear_kernel(pmdp);
+ if (shadow_pmd)
+ pmd_clear_kernel(shadow_pmd);
+}
+
#else /* __s390x__ */
-static inline void pgd_clear(pgd_t * pgdp)
+static inline void pgd_clear_kernel(pgd_t * pgdp)
{
pgd_val(*pgdp) = _PGD_ENTRY_INV | _PGD_ENTRY;
}
-static inline void pmd_clear(pmd_t * pmdp)
+static inline void pgd_clear(pgd_t * pgdp)
+{
+ pgd_t *shadow_pgd = get_shadow_pgd(pgdp);
+
+ pgd_clear_kernel(pgdp);
+ if (shadow_pgd)
+ pgd_clear_kernel(shadow_pgd);
+}
+
+static inline void pmd_clear_kernel(pmd_t * pmdp)
{
pmd_val(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY;
pmd_val1(*pmdp) = _PMD_ENTRY_INV | _PMD_ENTRY;
}
+static inline void pmd_clear(pmd_t * pmdp)
+{
+ pmd_t *shadow_pmd = get_shadow_pmd(pmdp);
+
+ pmd_clear_kernel(pmdp);
+ if (shadow_pmd)
+ pmd_clear_kernel(shadow_pmd);
+}
+
#endif /* __s390x__ */
static inline void pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
{
+ pte_t *shadow_pte = get_shadow_pte(ptep);
+
pte_val(*ptep) = _PAGE_TYPE_EMPTY;
+ if (shadow_pte)
+ pte_val(*shadow_pte) = _PAGE_TYPE_EMPTY;
}
/*
unsigned long address, pte_t *ptep)
{
pte_t pte = *ptep;
+ pte_t *shadow_pte = get_shadow_pte(ptep);
__ptep_ipte(address, ptep);
+ if (shadow_pte)
+ __ptep_ipte(address, shadow_pte);
return pte;
}
unsigned long pgtable_cache_sz;
};
+extern void s390_adjust_jiffies(void);
extern void print_cpu_info(struct cpuinfo_S390 *);
/* Lazy FPU handling on uni-processor */
#ifndef __s390x__
#define start_thread(regs, new_psw, new_stackp) do { \
- regs->psw.mask = PSW_USER_BITS; \
+ set_fs(USER_DS); \
+ regs->psw.mask = psw_user_bits; \
regs->psw.addr = new_psw | PSW_ADDR_AMODE; \
regs->gprs[15] = new_stackp ; \
} while (0)
#else /* __s390x__ */
#define start_thread(regs, new_psw, new_stackp) do { \
- regs->psw.mask = PSW_USER_BITS; \
+ set_fs(USER_DS); \
+ regs->psw.mask = psw_user_bits; \
regs->psw.addr = new_psw; \
regs->gprs[15] = new_stackp; \
} while (0)
#define start_thread31(regs, new_psw, new_stackp) do { \
- regs->psw.mask = PSW_USER32_BITS; \
+ set_fs(USER_DS); \
+ regs->psw.mask = psw_user32_bits; \
regs->psw.addr = new_psw; \
regs->gprs[15] = new_stackp; \
} while (0)
static inline void cpu_relax(void)
{
if (MACHINE_HAS_DIAG44)
- asm volatile("diag 0,0,68" : : : "memory");
- else
- barrier();
+ asm volatile("diag 0,0,68");
+ barrier();
}
/*
#endif /* __s390x__ */
}
+/*
+ * Basic Machine Check/Program Check Handler.
+ */
+
+extern void s390_base_mcck_handler(void);
+extern void s390_base_pgm_handler(void);
+extern void s390_base_ext_handler(void);
+
+extern void (*s390_base_mcck_handler_fn)(void);
+extern void (*s390_base_pgm_handler_fn)(void);
+extern void (*s390_base_ext_handler_fn)(void);
+
/*
* CPU idle notifier chain.
*/
#define PSW_ASC_SECONDARY 0x0000800000000000UL
#define PSW_ASC_HOME 0x0000C00000000000UL
-#define PSW_USER32_BITS (PSW_BASE32_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY)
+extern long psw_user32_bits;
#endif /* __s390x__ */
-#define PSW_KERNEL_BITS (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_PRIMARY | \
- PSW_MASK_MCHECK | PSW_DEFAULT_KEY)
-#define PSW_USER_BITS (PSW_BASE_BITS | PSW_MASK_DAT | PSW_ASC_HOME | \
- PSW_MASK_IO | PSW_MASK_EXT | PSW_MASK_MCHECK | \
- PSW_MASK_PSTATE | PSW_DEFAULT_KEY)
+extern long psw_kernel_bits;
+extern long psw_user_bits;
/* This macro merges a NEW PSW mask specified by the user into
the currently active PSW mask CURRENT, modifying only those
extern void register_reset_call(struct reset_call *reset);
extern void unregister_reset_call(struct reset_call *reset);
extern void s390_reset_system(void);
-extern void (*s390_reset_mcck_handler)(void);
-extern void (*s390_reset_pgm_handler)(void);
-
#endif /* _ASM_S390_RESET_H */
--- /dev/null
+/*
+ * include/asm-s390/sclp.h
+ *
+ * Copyright IBM Corp. 2007
+ * Author(s): Heiko Carstens <heiko.carstens@de.ibm.com>
+ */
+
+#ifndef _ASM_S390_SCLP_H
+#define _ASM_S390_SCLP_H
+
+#include <linux/types.h>
+
+struct sccb_header {
+ u16 length;
+ u8 function_code;
+ u8 control_mask[3];
+ u16 response_code;
+} __attribute__((packed));
+
+#define LOADPARM_LEN 8
+
+struct sclp_readinfo_sccb {
+ struct sccb_header header; /* 0-7 */
+ u16 rnmax; /* 8-9 */
+ u8 rnsize; /* 10 */
+ u8 _reserved0[24 - 11]; /* 11-23 */
+ u8 loadparm[LOADPARM_LEN]; /* 24-31 */
+ u8 _reserved1[91 - 32]; /* 32-90 */
+ u8 flags; /* 91 */
+ u8 _reserved2[100 - 92]; /* 92-99 */
+ u32 rnsize2; /* 100-103 */
+ u64 rnmax2; /* 104-111 */
+ u8 _reserved3[4096 - 112]; /* 112-4095 */
+} __attribute__((packed, aligned(4096)));
+
+extern struct sclp_readinfo_sccb s390_readinfo_sccb;
+extern void sclp_readinfo_early(void);
+
+#endif /* _ASM_S390_SCLP_H */
#include <asm-generic/sections.h>
+extern char _eshared[];
+
#endif
extern struct mem_chunk memory_chunk[];
+#ifdef CONFIG_S390_SWITCH_AMODE
+extern unsigned int switch_amode;
+#else
+#define switch_amode (0)
+#endif
+
+#ifdef CONFIG_S390_EXEC_PROTECT
+extern unsigned int s390_noexec;
+#else
+#define s390_noexec (0)
+#endif
+
/*
* Machine features detected in head.S
*/
extern unsigned int console_devno;
extern unsigned int console_irq;
+extern char vmhalt_cmd[];
+extern char vmpoff_cmd[];
+
#define CONSOLE_IS_UNDEFINED (console_mode == 0)
#define CONSOLE_IS_SCLP (console_mode == 1)
#define CONSOLE_IS_3215 (console_mode == 2)
extern u32 ipl_flags;
extern u16 ipl_devno;
-void do_reipl(void);
+extern void do_reipl(void);
+extern void ipl_save_parameters(void);
enum {
IPL_DEVNO_VALID = 1,
IPL_PARMBLOCK_VALID = 2,
+ IPL_NSS_VALID = 4,
};
+#define NSS_NAME_SIZE 8
+
+extern char kernel_nss_name[];
+
#define IPL_PARMBLOCK_START ((struct ipl_parameter_block *) \
IPL_PARMBLOCK_ORIGIN)
#define IPL_PARMBLOCK_SIZE (IPL_PARMBLOCK_START->hdr.len)
--- /dev/null
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <asm/byteorder.h>
+
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) ({ \
+ unsigned int __sh = (ah); \
+ unsigned int __sl = (al); \
+ asm volatile( \
+ " alr %1,%3\n" \
+ " brc 12,0f\n" \
+ " ahi %0,1\n" \
+ "0: alr %0,%2" \
+ : "+&d" (__sh), "+d" (__sl) \
+ : "d" (bh), "d" (bl) : "cc"); \
+ (sh) = __sh; \
+ (sl) = __sl; \
+})
+
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) ({ \
+ unsigned int __sh = (ah); \
+ unsigned int __sl = (al); \
+ asm volatile( \
+ " slr %1,%3\n" \
+ " brc 3,0f\n" \
+ " ahi %0,-1\n" \
+ "0: slr %0,%2" \
+ : "+&d" (__sh), "+d" (__sl) \
+ : "d" (bh), "d" (bl) : "cc"); \
+ (sh) = __sh; \
+ (sl) = __sl; \
+})
+
+/* a umul b = a mul b + (a>=2<<31) ? b<<32:0 + (b>=2<<31) ? a<<32:0 */
+#define umul_ppmm(wh, wl, u, v) ({ \
+ unsigned int __wh = u; \
+ unsigned int __wl = v; \
+ asm volatile( \
+ " ltr 1,%0\n" \
+ " mr 0,%1\n" \
+ " jnm 0f\n" \
+ " alr 0,%1\n" \
+ "0: ltr %1,%1\n" \
+ " jnm 1f\n" \
+ " alr 0,%0\n" \
+ "1: lr %0,0\n" \
+ " lr %1,1\n" \
+ : "+d" (__wh), "+d" (__wl) \
+ : : "0", "1", "cc"); \
+ wh = __wh; \
+ wl = __wl; \
+})
+
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { unsigned int __r; \
+ (q) = __udiv_qrnnd (&__r, (n1), (n0), (d)); \
+ (r) = __r; \
+ } while (0)
+extern unsigned long __udiv_qrnnd (unsigned int *, unsigned int,
+ unsigned int , unsigned int);
+
+#define UDIV_NEEDS_NORMALIZATION 0
+
+#define abort() return 0
+
+#define __BYTE_ORDER __BIG_ENDIAN
__u16 cpu;
} sigp_info;
+extern void machine_restart_smp(char *);
+extern void machine_halt_smp(void);
+extern void machine_power_off_smp(void);
+
extern void smp_setup_cpu_possible_map(void);
extern int smp_call_function_on(void (*func) (void *info), void *info,
int nonatomic, int wait, int cpu);
static inline void smp_send_stop(void)
{
/* Disable all interrupts/machine checks */
- __load_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK);
+ __load_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK);
}
#define smp_cpu_not_running(cpu) 1
__load_psw_mask(mask | (__raw_local_irq_stosm(0x00) & ~(-1UL >> 8)));
}
-#define local_mcck_enable() __set_psw_mask(PSW_KERNEL_BITS)
-#define local_mcck_disable() __set_psw_mask(PSW_KERNEL_BITS & ~PSW_MASK_MCHECK)
+#define local_mcck_enable() __set_psw_mask(psw_kernel_bits)
+#define local_mcck_disable() __set_psw_mask(psw_kernel_bits & ~PSW_MASK_MCHECK)
#ifdef CONFIG_SMP
/*************************************************************************
*
* tape390.h
- * enables user programs to display messages on the tape device
+ * enables user programs to display messages and control encryption
+ * on s390 tape devices
*
- * S390 and zSeries version
- * Copyright (C) 2001 IBM Corporation
- * Author(s): Despina Papadopoulou <despina_p@de.ibm.com>
+ * Copyright IBM Corp. 2001,2006
+ * Author(s): Michael Holzheu <holzheu@de.ibm.com>
*
*************************************************************************/
char message2[8];
} display_struct;
+/*
+ * Tape encryption support
+ */
+
+struct tape390_crypt_info {
+ char capability;
+ char status;
+ char medium_status;
+} __attribute__ ((packed));
+
+
+/* Macros for "capable" field */
+#define TAPE390_CRYPT_SUPPORTED_MASK 0x01
+#define TAPE390_CRYPT_SUPPORTED(x) \
+ ((x.capability & TAPE390_CRYPT_SUPPORTED_MASK))
+
+/* Macros for "status" field */
+#define TAPE390_CRYPT_ON_MASK 0x01
+#define TAPE390_CRYPT_ON(x) (((x.status) & TAPE390_CRYPT_ON_MASK))
+
+/* Macros for "medium status" field */
+#define TAPE390_MEDIUM_LOADED_MASK 0x01
+#define TAPE390_MEDIUM_ENCRYPTED_MASK 0x02
+#define TAPE390_MEDIUM_ENCRYPTED(x) \
+ (((x.medium_status) & TAPE390_MEDIUM_ENCRYPTED_MASK))
+#define TAPE390_MEDIUM_LOADED(x) \
+ (((x.medium_status) & TAPE390_MEDIUM_LOADED_MASK))
+
+/*
+ * The TAPE390_CRYPT_SET ioctl is used to switch on/off encryption.
+ * The "encryption_capable" and "tape_status" fields are ignored for this ioctl!
+ */
+#define TAPE390_CRYPT_SET _IOW('d', 2, struct tape390_crypt_info)
+
+/*
+ * The TAPE390_CRYPT_QUERY ioctl is used to query the encryption state.
+ */
+#define TAPE390_CRYPT_QUERY _IOR('d', 3, struct tape390_crypt_info)
+
+/* Values for "kekl1/2_type" and "kekl1/2_type_on_tape" fields */
+#define TAPE390_KEKL_TYPE_NONE 0
+#define TAPE390_KEKL_TYPE_LABEL 1
+#define TAPE390_KEKL_TYPE_HASH 2
+
+struct tape390_kekl {
+ unsigned char type;
+ unsigned char type_on_tape;
+ char label[65];
+} __attribute__ ((packed));
+
+struct tape390_kekl_pair {
+ struct tape390_kekl kekl[2];
+} __attribute__ ((packed));
+
+/*
+ * The TAPE390_KEKL_SET ioctl is used to set Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_SET _IOW('d', 4, struct tape390_kekl_pair)
+
+/*
+ * The TAPE390_KEKL_QUERY ioctl is used to query Key Encrypting Key labels.
+ */
+#define TAPE390_KEKL_QUERY _IOR('d', 5, struct tape390_kekl_pair)
+
#endif
extern int mod_virt_timer(struct vtimer_list *timer, __u64 expires);
extern int del_virt_timer(struct vtimer_list *timer);
+extern void init_cpu_vtimer(void);
+extern void vtime_init(void);
+
#endif /* __KERNEL__ */
#endif /* _ASM_S390_TIMER_H */
#ifndef _ASM_S390_TIMEX_H
#define _ASM_S390_TIMEX_H
+/* Inline functions for clock register access. */
+static inline int set_clock(__u64 time)
+{
+ int cc;
+
+ asm volatile(
+ " sck 0(%2)\n"
+ " ipm %0\n"
+ " srl %0,28\n"
+ : "=d" (cc) : "m" (time), "a" (&time) : "cc");
+ return cc;
+}
+
+static inline int store_clock(__u64 *time)
+{
+ int cc;
+
+ asm volatile(
+ " stck 0(%2)\n"
+ " ipm %0\n"
+ " srl %0,28\n"
+ : "=d" (cc), "=m" (*time) : "a" (time) : "cc");
+ return cc;
+}
+
+static inline void set_clock_comparator(__u64 time)
+{
+ asm volatile("sckc 0(%1)" : : "m" (time), "a" (&time));
+}
+
+static inline void store_clock_comparator(__u64 *time)
+{
+ asm volatile("stckc 0(%1)" : "=m" (*time) : "a" (time));
+}
+
#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */
typedef unsigned long long cycles_t;
return clk;
}
+static inline void get_clock_extended(void *dest)
+{
+ typedef struct { unsigned long long clk[2]; } __clock_t;
+
+#if __GNUC__ > 3 || (__GNUC__ == 3 && __GNUC_MINOR__ > 2)
+ asm volatile("stcke %0" : "=Q" (*((__clock_t *)dest)) : : "cc");
+#else /* __GNUC__ */
+ asm volatile("stcke 0(%1)" : "=m" (*((__clock_t *)dest))
+ : "a" ((__clock_t *)dest) : "cc");
+#endif /* __GNUC__ */
+}
+
static inline cycles_t get_cycles(void)
{
return (cycles_t) get_clock() >> 2;
}
+int get_sync_clock(unsigned long long *clock);
+void init_cpu_timer(void);
+
#endif
#include <linux/mm.h>
#include <asm/processor.h>
+#include <asm/pgalloc.h>
/*
* TLB flushing:
if (unlikely(cpus_empty(mm->cpu_vm_mask)))
return;
if (MACHINE_HAS_IDTE) {
+ pgd_t *shadow_pgd = get_shadow_pgd(mm->pgd);
+
+ if (shadow_pgd) {
+ asm volatile(
+ " .insn rrf,0xb98e0000,0,%0,%1,0"
+ : : "a" (2048),
+ "a" (__pa(shadow_pgd) & PAGE_MASK) : "cc" );
+ }
asm volatile(
" .insn rrf,0xb98e0000,0,%0,%1,0"
: : "a" (2048), "a" (__pa(mm->pgd)&PAGE_MASK) : "cc");
extern struct uaccess_ops uaccess;
extern struct uaccess_ops uaccess_std;
extern struct uaccess_ops uaccess_mvcos;
+extern struct uaccess_ops uaccess_mvcos_switch;
+extern struct uaccess_ops uaccess_pt;
static inline int __put_user_fn(size_t size, void __user *ptr, void *x)
{
* Calling conventions:
*
* ACPI_SYSTEM_XFACE - Interfaces to host OS (handlers, threads)
- * ACPI_EXTERNAL_XFACE - External ACPI interfaces
+ * ACPI_EXTERNAL_XFACE - External ACPI interfaces
* ACPI_INTERNAL_XFACE - Internal ACPI interfaces
* ACPI_INTERNAL_VAR_XFACE - Internal variable-parameter list interfaces
*/
int __acpi_acquire_global_lock(unsigned int *lock);
int __acpi_release_global_lock(unsigned int *lock);
-#define ACPI_ACQUIRE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = __acpi_acquire_global_lock((unsigned int *) GLptr))
+#define ACPI_ACQUIRE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = __acpi_acquire_global_lock(&facs->global_lock))
-#define ACPI_RELEASE_GLOBAL_LOCK(GLptr, Acq) \
- ((Acq) = __acpi_release_global_lock((unsigned int *) GLptr))
+#define ACPI_RELEASE_GLOBAL_LOCK(facs, Acq) \
+ ((Acq) = __acpi_release_global_lock(&facs->global_lock))
/*
* Math helper asm macros
extern int acpi_disabled;
extern int acpi_pci_disabled;
extern int acpi_ht;
-static inline void disable_acpi(void)
-{
- acpi_disabled = 1;
- acpi_ht = 0;
+static inline void disable_acpi(void)
+{
+ acpi_disabled = 1;
+ acpi_ht = 0;
acpi_pci_disabled = 1;
acpi_noirq = 1;
}
extern int acpi_gsi_to_irq(u32 gsi, unsigned int *irq);
static inline void acpi_noirq_set(void) { acpi_noirq = 1; }
-static inline void acpi_disable_pci(void)
+static inline void acpi_disable_pci(void)
{
- acpi_pci_disabled = 1;
+ acpi_pci_disabled = 1;
acpi_noirq_set();
}
extern int acpi_irq_balance_set(char *str);
extern int acpi_disabled;
extern int acpi_pci_disabled;
-extern u8 x86_acpiid_to_apicid[];
-
#define ARCH_HAS_POWER_INIT 1
extern int acpi_skip_timer_override;
#ifndef _ASM_SWIOTLB_H
-#define _ASM_SWTIOLB_H 1
-
+#define _ASM_SWIOTLB_H 1
#include <asm/dma-mapping.h>
extern int swiotlb_force;
#ifdef CONFIG_SWIOTLB
+#define SWIOTLB_ARCH_NEED_ALLOC
extern int swiotlb;
#else
#define swiotlb 0
extern void pci_swiotlb_init(void);
-#endif /* _ASM_SWTIOLB_H */
+static inline void dma_mark_clean(void *addr, size_t size) {}
+
+#endif /* _ASM_SWIOTLB_H */
header-y += netfilter_bridge/
header-y += netfilter_ipv4/
header-y += netfilter_ipv6/
+header-y += usb/
header-y += affs_hardblocks.h
header-y += aio_abi.h
unifdef-y += uinput.h
unifdef-y += uio.h
unifdef-y += unistd.h
-unifdef-y += usb_ch9.h
unifdef-y += usbdevice_fs.h
unifdef-y += user.h
unifdef-y += utsname.h
extern enum acpi_irq_model_id acpi_irq_model;
-
-/* Root System Description Pointer (RSDP) */
-
-struct acpi_table_rsdp {
- char signature[8];
- u8 checksum;
- char oem_id[6];
- u8 revision;
- u32 rsdt_address;
-} __attribute__ ((packed));
-
-struct acpi20_table_rsdp {
- char signature[8];
- u8 checksum;
- char oem_id[6];
- u8 revision;
- u32 rsdt_address;
- u32 length;
- u64 xsdt_address;
- u8 ext_checksum;
- u8 reserved[3];
-} __attribute__ ((packed));
-
-typedef struct {
- u8 type;
- u8 length;
-} __attribute__ ((packed)) acpi_table_entry_header;
-
-/* Root System Description Table (RSDT) */
-
-struct acpi_table_rsdt {
- struct acpi_table_header header;
- u32 entry[8];
-} __attribute__ ((packed));
-
-/* Extended System Description Table (XSDT) */
-
-struct acpi_table_xsdt {
- struct acpi_table_header header;
- u64 entry[1];
-} __attribute__ ((packed));
-
-/* Fixed ACPI Description Table (FADT) */
-
-struct acpi_table_fadt {
- struct acpi_table_header header;
- u32 facs_addr;
- u32 dsdt_addr;
- /* ... */
-} __attribute__ ((packed));
-
-/* Multiple APIC Description Table (MADT) */
-
-struct acpi_table_madt {
- struct acpi_table_header header;
- u32 lapic_address;
- struct {
- u32 pcat_compat:1;
- u32 reserved:31;
- } flags;
-} __attribute__ ((packed));
-
-enum acpi_madt_entry_id {
- ACPI_MADT_LAPIC = 0,
- ACPI_MADT_IOAPIC,
- ACPI_MADT_INT_SRC_OVR,
- ACPI_MADT_NMI_SRC,
- ACPI_MADT_LAPIC_NMI,
- ACPI_MADT_LAPIC_ADDR_OVR,
- ACPI_MADT_IOSAPIC,
- ACPI_MADT_LSAPIC,
- ACPI_MADT_PLAT_INT_SRC,
- ACPI_MADT_ENTRY_COUNT
-};
-
-typedef struct {
- u16 polarity:2;
- u16 trigger:2;
- u16 reserved:12;
-} __attribute__ ((packed)) acpi_interrupt_flags;
-
-struct acpi_table_lapic {
- acpi_table_entry_header header;
- u8 acpi_id;
- u8 id;
- struct {
- u32 enabled:1;
- u32 reserved:31;
- } flags;
-} __attribute__ ((packed));
-
-struct acpi_table_ioapic {
- acpi_table_entry_header header;
- u8 id;
- u8 reserved;
- u32 address;
- u32 global_irq_base;
-} __attribute__ ((packed));
-
-struct acpi_table_int_src_ovr {
- acpi_table_entry_header header;
- u8 bus;
- u8 bus_irq;
- u32 global_irq;
- acpi_interrupt_flags flags;
-} __attribute__ ((packed));
-
-struct acpi_table_nmi_src {
- acpi_table_entry_header header;
- acpi_interrupt_flags flags;
- u32 global_irq;
-} __attribute__ ((packed));
-
-struct acpi_table_lapic_nmi {
- acpi_table_entry_header header;
- u8 acpi_id;
- acpi_interrupt_flags flags;
- u8 lint;
-} __attribute__ ((packed));
-
-struct acpi_table_lapic_addr_ovr {
- acpi_table_entry_header header;
- u8 reserved[2];
- u64 address;
-} __attribute__ ((packed));
-
-struct acpi_table_iosapic {
- acpi_table_entry_header header;
- u8 id;
- u8 reserved;
- u32 global_irq_base;
- u64 address;
-} __attribute__ ((packed));
-
-struct acpi_table_lsapic {
- acpi_table_entry_header header;
- u8 acpi_id;
- u8 id;
- u8 eid;
- u8 reserved[3];
- struct {
- u32 enabled:1;
- u32 reserved:31;
- } flags;
-} __attribute__ ((packed));
-
-struct acpi_table_plat_int_src {
- acpi_table_entry_header header;
- acpi_interrupt_flags flags;
- u8 type; /* See acpi_interrupt_type */
- u8 id;
- u8 eid;
- u8 iosapic_vector;
- u32 global_irq;
- struct {
- u32 cpei_override_flag:1;
- u32 reserved:31;
- } plint_flags;
-} __attribute__ ((packed));
-
enum acpi_interrupt_id {
ACPI_INTERRUPT_PMI = 1,
ACPI_INTERRUPT_INIT,
#define ACPI_SPACE_MEM 0
-struct acpi_gen_regaddr {
- u8 space_id;
- u8 bit_width;
- u8 bit_offset;
- u8 resv;
- u32 addrl;
- u32 addrh;
-} __attribute__ ((packed));
-
-struct acpi_table_hpet {
- struct acpi_table_header header;
- u32 id;
- struct acpi_gen_regaddr addr;
- u8 number;
- u16 min_tick;
- u8 page_protect;
-} __attribute__ ((packed));
-
-/*
- * Simple Boot Flags
- * http://www.microsoft.com/whdc/hwdev/resources/specs/simp_bios.mspx
- */
-struct acpi_table_sbf
-{
- u8 sbf_signature[4];
- u32 sbf_len;
- u8 sbf_revision;
- u8 sbf_csum;
- u8 sbf_oemid[6];
- u8 sbf_oemtable[8];
- u8 sbf_revdata[4];
- u8 sbf_creator[4];
- u8 sbf_crearev[4];
- u8 sbf_cmos;
- u8 sbf_spare[3];
-} __attribute__ ((packed));
-
-/*
- * System Resource Affinity Table (SRAT)
- * http://www.microsoft.com/whdc/hwdev/platform/proc/SRAT.mspx
- */
-
-struct acpi_table_srat {
- struct acpi_table_header header;
- u32 table_revision;
- u64 reserved;
-} __attribute__ ((packed));
-
-enum acpi_srat_entry_id {
- ACPI_SRAT_PROCESSOR_AFFINITY = 0,
- ACPI_SRAT_MEMORY_AFFINITY,
- ACPI_SRAT_ENTRY_COUNT
-};
-
-struct acpi_table_processor_affinity {
- acpi_table_entry_header header;
- u8 proximity_domain;
- u8 apic_id;
- struct {
- u32 enabled:1;
- u32 reserved:31;
- } flags;
- u8 lsapic_eid;
- u8 reserved[7];
-} __attribute__ ((packed));
-
-struct acpi_table_memory_affinity {
- acpi_table_entry_header header;
- u8 proximity_domain;
- u8 reserved1[5];
- u32 base_addr_lo;
- u32 base_addr_hi;
- u32 length_lo;
- u32 length_hi;
- u32 memory_type; /* See acpi_address_range_id */
- struct {
- u32 enabled:1;
- u32 hot_pluggable:1;
- u32 reserved:30;
- } flags;
- u64 reserved2;
-} __attribute__ ((packed));
-
enum acpi_address_range_id {
ACPI_ADDRESS_RANGE_MEMORY = 1,
ACPI_ADDRESS_RANGE_RESERVED = 2,
ACPI_ADDRESS_RANGE_COUNT
};
-/*
- * System Locality Information Table (SLIT)
- * see http://devresource.hp.com/devresource/docs/techpapers/ia64/slit.pdf
- */
-
-struct acpi_table_slit {
- struct acpi_table_header header;
- u64 localities;
- u8 entry[1]; /* real size = localities^2 */
-} __attribute__ ((packed));
-
-/* Smart Battery Description Table (SBST) */
-
-struct acpi_table_sbst {
- struct acpi_table_header header;
- u32 warning; /* Warn user */
- u32 low; /* Critical sleep */
- u32 critical; /* Critical shutdown */
-} __attribute__ ((packed));
-
-/* Embedded Controller Boot Resources Table (ECDT) */
-
-struct acpi_table_ecdt {
- struct acpi_table_header header;
- struct acpi_generic_address ec_control;
- struct acpi_generic_address ec_data;
- u32 uid;
- u8 gpe_bit;
- char ec_id[0];
-} __attribute__ ((packed));
-
-/* PCI MMCONFIG */
-
-/* Defined in PCI Firmware Specification 3.0 */
-struct acpi_table_mcfg_config {
- u32 base_address;
- u32 base_reserved;
- u16 pci_segment_group_number;
- u8 start_bus_number;
- u8 end_bus_number;
- u8 reserved[4];
-} __attribute__ ((packed));
-struct acpi_table_mcfg {
- struct acpi_table_header header;
- u8 reserved[8];
- struct acpi_table_mcfg_config config[0];
-} __attribute__ ((packed));
/* Table Handlers */
-enum acpi_table_id {
- ACPI_TABLE_UNKNOWN = 0,
- ACPI_APIC,
- ACPI_BOOT,
- ACPI_DBGP,
- ACPI_DSDT,
- ACPI_ECDT,
- ACPI_ETDT,
- ACPI_FADT,
- ACPI_FACS,
- ACPI_OEMX,
- ACPI_PSDT,
- ACPI_SBST,
- ACPI_SLIT,
- ACPI_SPCR,
- ACPI_SRAT,
- ACPI_SSDT,
- ACPI_SPMI,
- ACPI_HPET,
- ACPI_MCFG,
- ACPI_TABLE_COUNT
-};
-
-typedef int (*acpi_table_handler) (unsigned long phys_addr, unsigned long size);
-
-extern acpi_table_handler acpi_table_ops[ACPI_TABLE_COUNT];
+typedef int (*acpi_table_handler) (struct acpi_table_header *table);
-typedef int (*acpi_madt_entry_handler) (acpi_table_entry_header *header, const unsigned long end);
+typedef int (*acpi_madt_entry_handler) (struct acpi_subtable_header *header, const unsigned long end);
char * __acpi_map_table (unsigned long phys_addr, unsigned long size);
unsigned long acpi_find_rsdp (void);
int acpi_numa_init (void);
int acpi_table_init (void);
-int acpi_table_parse (enum acpi_table_id id, acpi_table_handler handler);
-int acpi_get_table_header_early (enum acpi_table_id id, struct acpi_table_header **header);
-int acpi_table_parse_madt (enum acpi_madt_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
-int acpi_table_parse_srat (enum acpi_srat_entry_id id, acpi_madt_entry_handler handler, unsigned int max_entries);
-int acpi_parse_mcfg (unsigned long phys_addr, unsigned long size);
-void acpi_table_print (struct acpi_table_header *header, unsigned long phys_addr);
-void acpi_table_print_madt_entry (acpi_table_entry_header *madt);
-void acpi_table_print_srat_entry (acpi_table_entry_header *srat);
+int acpi_table_parse (char *id, acpi_table_handler handler);
+int acpi_table_parse_madt (enum acpi_madt_type id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int acpi_table_parse_srat (enum acpi_srat_type id, acpi_madt_entry_handler handler, unsigned int max_entries);
+int acpi_parse_mcfg (struct acpi_table_header *header);
+void acpi_table_print_madt_entry (struct acpi_subtable_header *madt);
+void acpi_table_print_srat_entry (struct acpi_subtable_header *srat);
/* the following four functions are architecture-dependent */
#ifdef CONFIG_HAVE_ARCH_PARSE_SRAT
#define acpi_numa_arch_fixup() do {} while (0)
#else
void acpi_numa_slit_init (struct acpi_table_slit *slit);
-void acpi_numa_processor_affinity_init (struct acpi_table_processor_affinity *pa);
-void acpi_numa_memory_affinity_init (struct acpi_table_memory_affinity *ma);
+void acpi_numa_processor_affinity_init (struct acpi_srat_cpu_affinity *pa);
+void acpi_numa_memory_affinity_init (struct acpi_srat_mem_affinity *ma);
void acpi_numa_arch_fixup(void);
#endif
extern int acpi_mp_config;
-extern struct acpi_table_mcfg_config *pci_mmcfg_config;
+extern struct acpi_mcfg_allocation *pci_mmcfg_config;
extern int pci_mmcfg_config_num;
extern int sbf_port;
struct klist_node knode_bus;
struct module * owner;
+ const char * mod_name; /* used for built-in modules */
int (*probe) (struct device * dev);
int (*remove) (struct device * dev);
__attribute__((format(printf,5,6)));
extern void class_device_destroy(struct class *cls, dev_t devt);
+struct device_type {
+ struct device_attribute *attrs;
+ int (*uevent)(struct device *dev, char **envp, int num_envp,
+ char *buffer, int buffer_size);
+ void (*release)(struct device *dev);
+};
+
/* interface for exporting device attributes */
struct device_attribute {
struct attribute attr;
struct kobject kobj;
char bus_id[BUS_ID_SIZE]; /* position on parent bus */
+ struct device_type *type;
unsigned is_registered:1;
struct device_attribute uevent_attr;
struct device_attribute *devt_attr;
/* class_device migration path */
struct list_head node;
- struct class *class; /* optional*/
+ struct class *class;
dev_t devt; /* dev_t, creates the sysfs "dev" */
struct attribute_group **groups; /* optional groups */
+ int uevent_suppress;
void (*release)(struct device * dev);
};
+#ifndef __HID_DEBUG_H
+#define __HID_DEBUG_H
+
/*
- * $Id: hid-debug.h,v 1.8 2001/09/25 09:37:57 vojtech Exp $
- *
- * (c) 1999 Andreas Gal <gal@cs.uni-magdeburg.de>
- * (c) 2000-2001 Vojtech Pavlik <vojtech@ucw.cz>
- *
- * Some debug stuff for the HID parser.
+ * Copyright (c) 2007 Jiri Kosina
*/
/*
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Should you need to contact me, the author, you can do so either by
- * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
- * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
*/
-#include <linux/input.h>
-
-struct hid_usage_entry {
- unsigned page;
- unsigned usage;
- char *description;
-};
-
-static const struct hid_usage_entry hid_usage_table[] = {
- { 0, 0, "Undefined" },
- { 1, 0, "GenericDesktop" },
- {0, 0x01, "Pointer"},
- {0, 0x02, "Mouse"},
- {0, 0x04, "Joystick"},
- {0, 0x05, "GamePad"},
- {0, 0x06, "Keyboard"},
- {0, 0x07, "Keypad"},
- {0, 0x08, "MultiAxis"},
- {0, 0x30, "X"},
- {0, 0x31, "Y"},
- {0, 0x32, "Z"},
- {0, 0x33, "Rx"},
- {0, 0x34, "Ry"},
- {0, 0x35, "Rz"},
- {0, 0x36, "Slider"},
- {0, 0x37, "Dial"},
- {0, 0x38, "Wheel"},
- {0, 0x39, "HatSwitch"},
- {0, 0x3a, "CountedBuffer"},
- {0, 0x3b, "ByteCount"},
- {0, 0x3c, "MotionWakeup"},
- {0, 0x3d, "Start"},
- {0, 0x3e, "Select"},
- {0, 0x40, "Vx"},
- {0, 0x41, "Vy"},
- {0, 0x42, "Vz"},
- {0, 0x43, "Vbrx"},
- {0, 0x44, "Vbry"},
- {0, 0x45, "Vbrz"},
- {0, 0x46, "Vno"},
- {0, 0x80, "SystemControl"},
- {0, 0x81, "SystemPowerDown"},
- {0, 0x82, "SystemSleep"},
- {0, 0x83, "SystemWakeUp"},
- {0, 0x84, "SystemContextMenu"},
- {0, 0x85, "SystemMainMenu"},
- {0, 0x86, "SystemAppMenu"},
- {0, 0x87, "SystemMenuHelp"},
- {0, 0x88, "SystemMenuExit"},
- {0, 0x89, "SystemMenuSelect"},
- {0, 0x8a, "SystemMenuRight"},
- {0, 0x8b, "SystemMenuLeft"},
- {0, 0x8c, "SystemMenuUp"},
- {0, 0x8d, "SystemMenuDown"},
- {0, 0x90, "D-PadUp"},
- {0, 0x91, "D-PadDown"},
- {0, 0x92, "D-PadRight"},
- {0, 0x93, "D-PadLeft"},
- { 2, 0, "Simulation" },
- {0, 0xb0, "Aileron"},
- {0, 0xb1, "AileronTrim"},
- {0, 0xb2, "Anti-Torque"},
- {0, 0xb3, "Autopilot"},
- {0, 0xb4, "Chaff"},
- {0, 0xb5, "Collective"},
- {0, 0xb6, "DiveBrake"},
- {0, 0xb7, "ElectronicCountermeasures"},
- {0, 0xb8, "Elevator"},
- {0, 0xb9, "ElevatorTrim"},
- {0, 0xba, "Rudder"},
- {0, 0xbb, "Throttle"},
- {0, 0xbc, "FlightCommunications"},
- {0, 0xbd, "FlareRelease"},
- {0, 0xbe, "LandingGear"},
- {0, 0xbf, "ToeBrake"},
- { 7, 0, "Keyboard" },
- { 8, 0, "LED" },
- {0, 0x01, "NumLock"},
- {0, 0x02, "CapsLock"},
- {0, 0x03, "ScrollLock"},
- {0, 0x04, "Compose"},
- {0, 0x05, "Kana"},
- {0, 0x4b, "GenericIndicator"},
- { 9, 0, "Button" },
- { 10, 0, "Ordinal" },
- { 12, 0, "Consumer" },
- {0, 0x238, "HorizontalWheel"},
- { 13, 0, "Digitizers" },
- {0, 0x01, "Digitizer"},
- {0, 0x02, "Pen"},
- {0, 0x03, "LightPen"},
- {0, 0x04, "TouchScreen"},
- {0, 0x05, "TouchPad"},
- {0, 0x20, "Stylus"},
- {0, 0x21, "Puck"},
- {0, 0x22, "Finger"},
- {0, 0x30, "TipPressure"},
- {0, 0x31, "BarrelPressure"},
- {0, 0x32, "InRange"},
- {0, 0x33, "Touch"},
- {0, 0x34, "UnTouch"},
- {0, 0x35, "Tap"},
- {0, 0x39, "TabletFunctionKey"},
- {0, 0x3a, "ProgramChangeKey"},
- {0, 0x3c, "Invert"},
- {0, 0x42, "TipSwitch"},
- {0, 0x43, "SecondaryTipSwitch"},
- {0, 0x44, "BarrelSwitch"},
- {0, 0x45, "Eraser"},
- {0, 0x46, "TabletPick"},
- { 15, 0, "PhysicalInterfaceDevice" },
- {0, 0x00, "Undefined"},
- {0, 0x01, "Physical_Interface_Device"},
- {0, 0x20, "Normal"},
- {0, 0x21, "Set_Effect_Report"},
- {0, 0x22, "Effect_Block_Index"},
- {0, 0x23, "Parameter_Block_Offset"},
- {0, 0x24, "ROM_Flag"},
- {0, 0x25, "Effect_Type"},
- {0, 0x26, "ET_Constant_Force"},
- {0, 0x27, "ET_Ramp"},
- {0, 0x28, "ET_Custom_Force_Data"},
- {0, 0x30, "ET_Square"},
- {0, 0x31, "ET_Sine"},
- {0, 0x32, "ET_Triangle"},
- {0, 0x33, "ET_Sawtooth_Up"},
- {0, 0x34, "ET_Sawtooth_Down"},
- {0, 0x40, "ET_Spring"},
- {0, 0x41, "ET_Damper"},
- {0, 0x42, "ET_Inertia"},
- {0, 0x43, "ET_Friction"},
- {0, 0x50, "Duration"},
- {0, 0x51, "Sample_Period"},
- {0, 0x52, "Gain"},
- {0, 0x53, "Trigger_Button"},
- {0, 0x54, "Trigger_Repeat_Interval"},
- {0, 0x55, "Axes_Enable"},
- {0, 0x56, "Direction_Enable"},
- {0, 0x57, "Direction"},
- {0, 0x58, "Type_Specific_Block_Offset"},
- {0, 0x59, "Block_Type"},
- {0, 0x5A, "Set_Envelope_Report"},
- {0, 0x5B, "Attack_Level"},
- {0, 0x5C, "Attack_Time"},
- {0, 0x5D, "Fade_Level"},
- {0, 0x5E, "Fade_Time"},
- {0, 0x5F, "Set_Condition_Report"},
- {0, 0x60, "CP_Offset"},
- {0, 0x61, "Positive_Coefficient"},
- {0, 0x62, "Negative_Coefficient"},
- {0, 0x63, "Positive_Saturation"},
- {0, 0x64, "Negative_Saturation"},
- {0, 0x65, "Dead_Band"},
- {0, 0x66, "Download_Force_Sample"},
- {0, 0x67, "Isoch_Custom_Force_Enable"},
- {0, 0x68, "Custom_Force_Data_Report"},
- {0, 0x69, "Custom_Force_Data"},
- {0, 0x6A, "Custom_Force_Vendor_Defined_Data"},
- {0, 0x6B, "Set_Custom_Force_Report"},
- {0, 0x6C, "Custom_Force_Data_Offset"},
- {0, 0x6D, "Sample_Count"},
- {0, 0x6E, "Set_Periodic_Report"},
- {0, 0x6F, "Offset"},
- {0, 0x70, "Magnitude"},
- {0, 0x71, "Phase"},
- {0, 0x72, "Period"},
- {0, 0x73, "Set_Constant_Force_Report"},
- {0, 0x74, "Set_Ramp_Force_Report"},
- {0, 0x75, "Ramp_Start"},
- {0, 0x76, "Ramp_End"},
- {0, 0x77, "Effect_Operation_Report"},
- {0, 0x78, "Effect_Operation"},
- {0, 0x79, "Op_Effect_Start"},
- {0, 0x7A, "Op_Effect_Start_Solo"},
- {0, 0x7B, "Op_Effect_Stop"},
- {0, 0x7C, "Loop_Count"},
- {0, 0x7D, "Device_Gain_Report"},
- {0, 0x7E, "Device_Gain"},
- {0, 0x7F, "PID_Pool_Report"},
- {0, 0x80, "RAM_Pool_Size"},
- {0, 0x81, "ROM_Pool_Size"},
- {0, 0x82, "ROM_Effect_Block_Count"},
- {0, 0x83, "Simultaneous_Effects_Max"},
- {0, 0x84, "Pool_Alignment"},
- {0, 0x85, "PID_Pool_Move_Report"},
- {0, 0x86, "Move_Source"},
- {0, 0x87, "Move_Destination"},
- {0, 0x88, "Move_Length"},
- {0, 0x89, "PID_Block_Load_Report"},
- {0, 0x8B, "Block_Load_Status"},
- {0, 0x8C, "Block_Load_Success"},
- {0, 0x8D, "Block_Load_Full"},
- {0, 0x8E, "Block_Load_Error"},
- {0, 0x8F, "Block_Handle"},
- {0, 0x90, "PID_Block_Free_Report"},
- {0, 0x91, "Type_Specific_Block_Handle"},
- {0, 0x92, "PID_State_Report"},
- {0, 0x94, "Effect_Playing"},
- {0, 0x95, "PID_Device_Control_Report"},
- {0, 0x96, "PID_Device_Control"},
- {0, 0x97, "DC_Enable_Actuators"},
- {0, 0x98, "DC_Disable_Actuators"},
- {0, 0x99, "DC_Stop_All_Effects"},
- {0, 0x9A, "DC_Device_Reset"},
- {0, 0x9B, "DC_Device_Pause"},
- {0, 0x9C, "DC_Device_Continue"},
- {0, 0x9F, "Device_Paused"},
- {0, 0xA0, "Actuators_Enabled"},
- {0, 0xA4, "Safety_Switch"},
- {0, 0xA5, "Actuator_Override_Switch"},
- {0, 0xA6, "Actuator_Power"},
- {0, 0xA7, "Start_Delay"},
- {0, 0xA8, "Parameter_Block_Size"},
- {0, 0xA9, "Device_Managed_Pool"},
- {0, 0xAA, "Shared_Parameter_Blocks"},
- {0, 0xAB, "Create_New_Effect_Report"},
- {0, 0xAC, "RAM_Pool_Available"},
- { 0x84, 0, "Power Device" },
- { 0x84, 0x02, "PresentStatus" },
- { 0x84, 0x03, "ChangeStatus" },
- { 0x84, 0x04, "UPS" },
- { 0x84, 0x05, "PowerSupply" },
- { 0x84, 0x10, "BatterySystem" },
- { 0x84, 0x11, "BatterySystemID" },
- { 0x84, 0x12, "Battery" },
- { 0x84, 0x13, "BatteryID" },
- { 0x84, 0x14, "Charger" },
- { 0x84, 0x15, "ChargerID" },
- { 0x84, 0x16, "PowerConverter" },
- { 0x84, 0x17, "PowerConverterID" },
- { 0x84, 0x18, "OutletSystem" },
- { 0x84, 0x19, "OutletSystemID" },
- { 0x84, 0x1a, "Input" },
- { 0x84, 0x1b, "InputID" },
- { 0x84, 0x1c, "Output" },
- { 0x84, 0x1d, "OutputID" },
- { 0x84, 0x1e, "Flow" },
- { 0x84, 0x1f, "FlowID" },
- { 0x84, 0x20, "Outlet" },
- { 0x84, 0x21, "OutletID" },
- { 0x84, 0x22, "Gang" },
- { 0x84, 0x24, "PowerSummary" },
- { 0x84, 0x25, "PowerSummaryID" },
- { 0x84, 0x30, "Voltage" },
- { 0x84, 0x31, "Current" },
- { 0x84, 0x32, "Frequency" },
- { 0x84, 0x33, "ApparentPower" },
- { 0x84, 0x35, "PercentLoad" },
- { 0x84, 0x40, "ConfigVoltage" },
- { 0x84, 0x41, "ConfigCurrent" },
- { 0x84, 0x43, "ConfigApparentPower" },
- { 0x84, 0x53, "LowVoltageTransfer" },
- { 0x84, 0x54, "HighVoltageTransfer" },
- { 0x84, 0x56, "DelayBeforeStartup" },
- { 0x84, 0x57, "DelayBeforeShutdown" },
- { 0x84, 0x58, "Test" },
- { 0x84, 0x5a, "AudibleAlarmControl" },
- { 0x84, 0x60, "Present" },
- { 0x84, 0x61, "Good" },
- { 0x84, 0x62, "InternalFailure" },
- { 0x84, 0x65, "Overload" },
- { 0x84, 0x66, "OverCharged" },
- { 0x84, 0x67, "OverTemperature" },
- { 0x84, 0x68, "ShutdownRequested" },
- { 0x84, 0x69, "ShutdownImminent" },
- { 0x84, 0x6b, "SwitchOn/Off" },
- { 0x84, 0x6c, "Switchable" },
- { 0x84, 0x6d, "Used" },
- { 0x84, 0x6e, "Boost" },
- { 0x84, 0x73, "CommunicationLost" },
- { 0x84, 0xfd, "iManufacturer" },
- { 0x84, 0xfe, "iProduct" },
- { 0x84, 0xff, "iSerialNumber" },
- { 0x85, 0, "Battery System" },
- { 0x85, 0x01, "SMBBatteryMode" },
- { 0x85, 0x02, "SMBBatteryStatus" },
- { 0x85, 0x03, "SMBAlarmWarning" },
- { 0x85, 0x04, "SMBChargerMode" },
- { 0x85, 0x05, "SMBChargerStatus" },
- { 0x85, 0x06, "SMBChargerSpecInfo" },
- { 0x85, 0x07, "SMBSelectorState" },
- { 0x85, 0x08, "SMBSelectorPresets" },
- { 0x85, 0x09, "SMBSelectorInfo" },
- { 0x85, 0x29, "RemainingCapacityLimit" },
- { 0x85, 0x2c, "CapacityMode" },
- { 0x85, 0x42, "BelowRemainingCapacityLimit" },
- { 0x85, 0x44, "Charging" },
- { 0x85, 0x45, "Discharging" },
- { 0x85, 0x4b, "NeedReplacement" },
- { 0x85, 0x66, "RemainingCapacity" },
- { 0x85, 0x68, "RunTimeToEmpty" },
- { 0x85, 0x6a, "AverageTimeToFull" },
- { 0x85, 0x83, "DesignCapacity" },
- { 0x85, 0x85, "ManufacturerDate" },
- { 0x85, 0x89, "iDeviceChemistry" },
- { 0x85, 0x8b, "Rechargable" },
- { 0x85, 0x8f, "iOEMInformation" },
- { 0x85, 0x8d, "CapacityGranularity1" },
- { 0x85, 0xd0, "ACPresent" },
- /* pages 0xff00 to 0xffff are vendor-specific */
- { 0xffff, 0, "Vendor-specific-FF" },
- { 0, 0, NULL }
-};
-
-static void resolv_usage_page(unsigned page) {
- const struct hid_usage_entry *p;
-
- for (p = hid_usage_table; p->description; p++)
- if (p->page == page) {
- printk("%s", p->description);
- return;
- }
- printk("%04x", page);
-}
-
-static void resolv_usage(unsigned usage) {
- const struct hid_usage_entry *p;
-
- resolv_usage_page(usage >> 16);
- printk(".");
- for (p = hid_usage_table; p->description; p++)
- if (p->page == (usage >> 16)) {
- for(++p; p->description && p->usage != 0; p++)
- if (p->usage == (usage & 0xffff)) {
- printk("%s", p->description);
- return;
- }
- break;
- }
- printk("%04x", usage & 0xffff);
-}
-
-__inline__ static void tab(int n) {
- while (n--) printk(" ");
-}
-
-static void hid_dump_field(struct hid_field *field, int n) {
- int j;
-
- if (field->physical) {
- tab(n);
- printk("Physical(");
- resolv_usage(field->physical); printk(")\n");
- }
- if (field->logical) {
- tab(n);
- printk("Logical(");
- resolv_usage(field->logical); printk(")\n");
- }
- tab(n); printk("Usage(%d)\n", field->maxusage);
- for (j = 0; j < field->maxusage; j++) {
- tab(n+2);resolv_usage(field->usage[j].hid); printk("\n");
- }
- if (field->logical_minimum != field->logical_maximum) {
- tab(n); printk("Logical Minimum(%d)\n", field->logical_minimum);
- tab(n); printk("Logical Maximum(%d)\n", field->logical_maximum);
- }
- if (field->physical_minimum != field->physical_maximum) {
- tab(n); printk("Physical Minimum(%d)\n", field->physical_minimum);
- tab(n); printk("Physical Maximum(%d)\n", field->physical_maximum);
- }
- if (field->unit_exponent) {
- tab(n); printk("Unit Exponent(%d)\n", field->unit_exponent);
- }
- if (field->unit) {
- char *systems[5] = { "None", "SI Linear", "SI Rotation", "English Linear", "English Rotation" };
- char *units[5][8] = {
- { "None", "None", "None", "None", "None", "None", "None", "None" },
- { "None", "Centimeter", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
- { "None", "Radians", "Gram", "Seconds", "Kelvin", "Ampere", "Candela", "None" },
- { "None", "Inch", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" },
- { "None", "Degrees", "Slug", "Seconds", "Fahrenheit", "Ampere", "Candela", "None" }
- };
-
- int i;
- int sys;
- __u32 data = field->unit;
-
- /* First nibble tells us which system we're in. */
- sys = data & 0xf;
- data >>= 4;
-
- if(sys > 4) {
- tab(n); printk("Unit(Invalid)\n");
- }
- else {
- int earlier_unit = 0;
-
- tab(n); printk("Unit(%s : ", systems[sys]);
-
- for (i=1 ; i<sizeof(__u32)*2 ; i++) {
- char nibble = data & 0xf;
- data >>= 4;
- if (nibble != 0) {
- if(earlier_unit++ > 0)
- printk("*");
- printk("%s", units[sys][i]);
- if(nibble != 1) {
- /* This is a _signed_ nibble(!) */
-
- int val = nibble & 0x7;
- if(nibble & 0x08)
- val = -((0x7 & ~val) +1);
- printk("^%d", val);
- }
- }
- }
- printk(")\n");
- }
- }
- tab(n); printk("Report Size(%u)\n", field->report_size);
- tab(n); printk("Report Count(%u)\n", field->report_count);
- tab(n); printk("Report Offset(%u)\n", field->report_offset);
-
- tab(n); printk("Flags( ");
- j = field->flags;
- printk("%s", HID_MAIN_ITEM_CONSTANT & j ? "Constant " : "");
- printk("%s", HID_MAIN_ITEM_VARIABLE & j ? "Variable " : "Array ");
- printk("%s", HID_MAIN_ITEM_RELATIVE & j ? "Relative " : "Absolute ");
- printk("%s", HID_MAIN_ITEM_WRAP & j ? "Wrap " : "");
- printk("%s", HID_MAIN_ITEM_NONLINEAR & j ? "NonLinear " : "");
- printk("%s", HID_MAIN_ITEM_NO_PREFERRED & j ? "NoPrefferedState " : "");
- printk("%s", HID_MAIN_ITEM_NULL_STATE & j ? "NullState " : "");
- printk("%s", HID_MAIN_ITEM_VOLATILE & j ? "Volatile " : "");
- printk("%s", HID_MAIN_ITEM_BUFFERED_BYTE & j ? "BufferedByte " : "");
- printk(")\n");
-}
-
-static void __attribute__((unused)) hid_dump_device(struct hid_device *device) {
- struct hid_report_enum *report_enum;
- struct hid_report *report;
- struct list_head *list;
- unsigned i,k;
- static char *table[] = {"INPUT", "OUTPUT", "FEATURE"};
-
- for (i = 0; i < HID_REPORT_TYPES; i++) {
- report_enum = device->report_enum + i;
- list = report_enum->report_list.next;
- while (list != &report_enum->report_list) {
- report = (struct hid_report *) list;
- tab(2);
- printk("%s", table[i]);
- if (report->id)
- printk("(%d)", report->id);
- printk("[%s]", table[report->type]);
- printk("\n");
- for (k = 0; k < report->maxfield; k++) {
- tab(4);
- printk("Field(%d)\n", k);
- hid_dump_field(report->field[k], 6);
- }
- list = list->next;
- }
- }
-}
-
-static void __attribute__((unused)) hid_dump_input(struct hid_usage *usage, __s32 value) {
- printk("hid-debug: input ");
- resolv_usage(usage->hid);
- printk(" = %d\n", value);
-}
-
-
-static char *events[EV_MAX + 1] = {
- [EV_SYN] = "Sync", [EV_KEY] = "Key",
- [EV_REL] = "Relative", [EV_ABS] = "Absolute",
- [EV_MSC] = "Misc", [EV_LED] = "LED",
- [EV_SND] = "Sound", [EV_REP] = "Repeat",
- [EV_FF] = "ForceFeedback", [EV_PWR] = "Power",
- [EV_FF_STATUS] = "ForceFeedbackStatus",
-};
-
-static char *syncs[2] = {
- [SYN_REPORT] = "Report", [SYN_CONFIG] = "Config",
-};
-static char *keys[KEY_MAX + 1] = {
- [KEY_RESERVED] = "Reserved", [KEY_ESC] = "Esc",
- [KEY_1] = "1", [KEY_2] = "2",
- [KEY_3] = "3", [KEY_4] = "4",
- [KEY_5] = "5", [KEY_6] = "6",
- [KEY_7] = "7", [KEY_8] = "8",
- [KEY_9] = "9", [KEY_0] = "0",
- [KEY_MINUS] = "Minus", [KEY_EQUAL] = "Equal",
- [KEY_BACKSPACE] = "Backspace", [KEY_TAB] = "Tab",
- [KEY_Q] = "Q", [KEY_W] = "W",
- [KEY_E] = "E", [KEY_R] = "R",
- [KEY_T] = "T", [KEY_Y] = "Y",
- [KEY_U] = "U", [KEY_I] = "I",
- [KEY_O] = "O", [KEY_P] = "P",
- [KEY_LEFTBRACE] = "LeftBrace", [KEY_RIGHTBRACE] = "RightBrace",
- [KEY_ENTER] = "Enter", [KEY_LEFTCTRL] = "LeftControl",
- [KEY_A] = "A", [KEY_S] = "S",
- [KEY_D] = "D", [KEY_F] = "F",
- [KEY_G] = "G", [KEY_H] = "H",
- [KEY_J] = "J", [KEY_K] = "K",
- [KEY_L] = "L", [KEY_SEMICOLON] = "Semicolon",
- [KEY_APOSTROPHE] = "Apostrophe", [KEY_GRAVE] = "Grave",
- [KEY_LEFTSHIFT] = "LeftShift", [KEY_BACKSLASH] = "BackSlash",
- [KEY_Z] = "Z", [KEY_X] = "X",
- [KEY_C] = "C", [KEY_V] = "V",
- [KEY_B] = "B", [KEY_N] = "N",
- [KEY_M] = "M", [KEY_COMMA] = "Comma",
- [KEY_DOT] = "Dot", [KEY_SLASH] = "Slash",
- [KEY_RIGHTSHIFT] = "RightShift", [KEY_KPASTERISK] = "KPAsterisk",
- [KEY_LEFTALT] = "LeftAlt", [KEY_SPACE] = "Space",
- [KEY_CAPSLOCK] = "CapsLock", [KEY_F1] = "F1",
- [KEY_F2] = "F2", [KEY_F3] = "F3",
- [KEY_F4] = "F4", [KEY_F5] = "F5",
- [KEY_F6] = "F6", [KEY_F7] = "F7",
- [KEY_F8] = "F8", [KEY_F9] = "F9",
- [KEY_F10] = "F10", [KEY_NUMLOCK] = "NumLock",
- [KEY_SCROLLLOCK] = "ScrollLock", [KEY_KP7] = "KP7",
- [KEY_KP8] = "KP8", [KEY_KP9] = "KP9",
- [KEY_KPMINUS] = "KPMinus", [KEY_KP4] = "KP4",
- [KEY_KP5] = "KP5", [KEY_KP6] = "KP6",
- [KEY_KPPLUS] = "KPPlus", [KEY_KP1] = "KP1",
- [KEY_KP2] = "KP2", [KEY_KP3] = "KP3",
- [KEY_KP0] = "KP0", [KEY_KPDOT] = "KPDot",
- [KEY_ZENKAKUHANKAKU] = "Zenkaku/Hankaku", [KEY_102ND] = "102nd",
- [KEY_F11] = "F11", [KEY_F12] = "F12",
- [KEY_RO] = "RO", [KEY_KATAKANA] = "Katakana",
- [KEY_HIRAGANA] = "HIRAGANA", [KEY_HENKAN] = "Henkan",
- [KEY_KATAKANAHIRAGANA] = "Katakana/Hiragana", [KEY_MUHENKAN] = "Muhenkan",
- [KEY_KPJPCOMMA] = "KPJpComma", [KEY_KPENTER] = "KPEnter",
- [KEY_RIGHTCTRL] = "RightCtrl", [KEY_KPSLASH] = "KPSlash",
- [KEY_SYSRQ] = "SysRq", [KEY_RIGHTALT] = "RightAlt",
- [KEY_LINEFEED] = "LineFeed", [KEY_HOME] = "Home",
- [KEY_UP] = "Up", [KEY_PAGEUP] = "PageUp",
- [KEY_LEFT] = "Left", [KEY_RIGHT] = "Right",
- [KEY_END] = "End", [KEY_DOWN] = "Down",
- [KEY_PAGEDOWN] = "PageDown", [KEY_INSERT] = "Insert",
- [KEY_DELETE] = "Delete", [KEY_MACRO] = "Macro",
- [KEY_MUTE] = "Mute", [KEY_VOLUMEDOWN] = "VolumeDown",
- [KEY_VOLUMEUP] = "VolumeUp", [KEY_POWER] = "Power",
- [KEY_KPEQUAL] = "KPEqual", [KEY_KPPLUSMINUS] = "KPPlusMinus",
- [KEY_PAUSE] = "Pause", [KEY_KPCOMMA] = "KPComma",
- [KEY_HANGUEL] = "Hangeul", [KEY_HANJA] = "Hanja",
- [KEY_YEN] = "Yen", [KEY_LEFTMETA] = "LeftMeta",
- [KEY_RIGHTMETA] = "RightMeta", [KEY_COMPOSE] = "Compose",
- [KEY_STOP] = "Stop", [KEY_AGAIN] = "Again",
- [KEY_PROPS] = "Props", [KEY_UNDO] = "Undo",
- [KEY_FRONT] = "Front", [KEY_COPY] = "Copy",
- [KEY_OPEN] = "Open", [KEY_PASTE] = "Paste",
- [KEY_FIND] = "Find", [KEY_CUT] = "Cut",
- [KEY_HELP] = "Help", [KEY_MENU] = "Menu",
- [KEY_CALC] = "Calc", [KEY_SETUP] = "Setup",
- [KEY_SLEEP] = "Sleep", [KEY_WAKEUP] = "WakeUp",
- [KEY_FILE] = "File", [KEY_SENDFILE] = "SendFile",
- [KEY_DELETEFILE] = "DeleteFile", [KEY_XFER] = "X-fer",
- [KEY_PROG1] = "Prog1", [KEY_PROG2] = "Prog2",
- [KEY_WWW] = "WWW", [KEY_MSDOS] = "MSDOS",
- [KEY_COFFEE] = "Coffee", [KEY_DIRECTION] = "Direction",
- [KEY_CYCLEWINDOWS] = "CycleWindows", [KEY_MAIL] = "Mail",
- [KEY_BOOKMARKS] = "Bookmarks", [KEY_COMPUTER] = "Computer",
- [KEY_BACK] = "Back", [KEY_FORWARD] = "Forward",
- [KEY_CLOSECD] = "CloseCD", [KEY_EJECTCD] = "EjectCD",
- [KEY_EJECTCLOSECD] = "EjectCloseCD", [KEY_NEXTSONG] = "NextSong",
- [KEY_PLAYPAUSE] = "PlayPause", [KEY_PREVIOUSSONG] = "PreviousSong",
- [KEY_STOPCD] = "StopCD", [KEY_RECORD] = "Record",
- [KEY_REWIND] = "Rewind", [KEY_PHONE] = "Phone",
- [KEY_ISO] = "ISOKey", [KEY_CONFIG] = "Config",
- [KEY_HOMEPAGE] = "HomePage", [KEY_REFRESH] = "Refresh",
- [KEY_EXIT] = "Exit", [KEY_MOVE] = "Move",
- [KEY_EDIT] = "Edit", [KEY_SCROLLUP] = "ScrollUp",
- [KEY_SCROLLDOWN] = "ScrollDown", [KEY_KPLEFTPAREN] = "KPLeftParenthesis",
- [KEY_KPRIGHTPAREN] = "KPRightParenthesis", [KEY_NEW] = "New",
- [KEY_REDO] = "Redo", [KEY_F13] = "F13",
- [KEY_F14] = "F14", [KEY_F15] = "F15",
- [KEY_F16] = "F16", [KEY_F17] = "F17",
- [KEY_F18] = "F18", [KEY_F19] = "F19",
- [KEY_F20] = "F20", [KEY_F21] = "F21",
- [KEY_F22] = "F22", [KEY_F23] = "F23",
- [KEY_F24] = "F24", [KEY_PLAYCD] = "PlayCD",
- [KEY_PAUSECD] = "PauseCD", [KEY_PROG3] = "Prog3",
- [KEY_PROG4] = "Prog4", [KEY_SUSPEND] = "Suspend",
- [KEY_CLOSE] = "Close", [KEY_PLAY] = "Play",
- [KEY_FASTFORWARD] = "FastForward", [KEY_BASSBOOST] = "BassBoost",
- [KEY_PRINT] = "Print", [KEY_HP] = "HP",
- [KEY_CAMERA] = "Camera", [KEY_SOUND] = "Sound",
- [KEY_QUESTION] = "Question", [KEY_EMAIL] = "Email",
- [KEY_CHAT] = "Chat", [KEY_SEARCH] = "Search",
- [KEY_CONNECT] = "Connect", [KEY_FINANCE] = "Finance",
- [KEY_SPORT] = "Sport", [KEY_SHOP] = "Shop",
- [KEY_ALTERASE] = "AlternateErase", [KEY_CANCEL] = "Cancel",
- [KEY_BRIGHTNESSDOWN] = "BrightnessDown", [KEY_BRIGHTNESSUP] = "BrightnessUp",
- [KEY_MEDIA] = "Media", [KEY_UNKNOWN] = "Unknown",
- [BTN_0] = "Btn0", [BTN_1] = "Btn1",
- [BTN_2] = "Btn2", [BTN_3] = "Btn3",
- [BTN_4] = "Btn4", [BTN_5] = "Btn5",
- [BTN_6] = "Btn6", [BTN_7] = "Btn7",
- [BTN_8] = "Btn8", [BTN_9] = "Btn9",
- [BTN_LEFT] = "LeftBtn", [BTN_RIGHT] = "RightBtn",
- [BTN_MIDDLE] = "MiddleBtn", [BTN_SIDE] = "SideBtn",
- [BTN_EXTRA] = "ExtraBtn", [BTN_FORWARD] = "ForwardBtn",
- [BTN_BACK] = "BackBtn", [BTN_TASK] = "TaskBtn",
- [BTN_TRIGGER] = "Trigger", [BTN_THUMB] = "ThumbBtn",
- [BTN_THUMB2] = "ThumbBtn2", [BTN_TOP] = "TopBtn",
- [BTN_TOP2] = "TopBtn2", [BTN_PINKIE] = "PinkieBtn",
- [BTN_BASE] = "BaseBtn", [BTN_BASE2] = "BaseBtn2",
- [BTN_BASE3] = "BaseBtn3", [BTN_BASE4] = "BaseBtn4",
- [BTN_BASE5] = "BaseBtn5", [BTN_BASE6] = "BaseBtn6",
- [BTN_DEAD] = "BtnDead", [BTN_A] = "BtnA",
- [BTN_B] = "BtnB", [BTN_C] = "BtnC",
- [BTN_X] = "BtnX", [BTN_Y] = "BtnY",
- [BTN_Z] = "BtnZ", [BTN_TL] = "BtnTL",
- [BTN_TR] = "BtnTR", [BTN_TL2] = "BtnTL2",
- [BTN_TR2] = "BtnTR2", [BTN_SELECT] = "BtnSelect",
- [BTN_START] = "BtnStart", [BTN_MODE] = "BtnMode",
- [BTN_THUMBL] = "BtnThumbL", [BTN_THUMBR] = "BtnThumbR",
- [BTN_TOOL_PEN] = "ToolPen", [BTN_TOOL_RUBBER] = "ToolRubber",
- [BTN_TOOL_BRUSH] = "ToolBrush", [BTN_TOOL_PENCIL] = "ToolPencil",
- [BTN_TOOL_AIRBRUSH] = "ToolAirbrush", [BTN_TOOL_FINGER] = "ToolFinger",
- [BTN_TOOL_MOUSE] = "ToolMouse", [BTN_TOOL_LENS] = "ToolLens",
- [BTN_TOUCH] = "Touch", [BTN_STYLUS] = "Stylus",
- [BTN_STYLUS2] = "Stylus2", [BTN_TOOL_DOUBLETAP] = "ToolDoubleTap",
- [BTN_TOOL_TRIPLETAP] = "ToolTripleTap", [BTN_GEAR_DOWN] = "WheelBtn",
- [BTN_GEAR_UP] = "Gear up", [KEY_OK] = "Ok",
- [KEY_SELECT] = "Select", [KEY_GOTO] = "Goto",
- [KEY_CLEAR] = "Clear", [KEY_POWER2] = "Power2",
- [KEY_OPTION] = "Option", [KEY_INFO] = "Info",
- [KEY_TIME] = "Time", [KEY_VENDOR] = "Vendor",
- [KEY_ARCHIVE] = "Archive", [KEY_PROGRAM] = "Program",
- [KEY_CHANNEL] = "Channel", [KEY_FAVORITES] = "Favorites",
- [KEY_EPG] = "EPG", [KEY_PVR] = "PVR",
- [KEY_MHP] = "MHP", [KEY_LANGUAGE] = "Language",
- [KEY_TITLE] = "Title", [KEY_SUBTITLE] = "Subtitle",
- [KEY_ANGLE] = "Angle", [KEY_ZOOM] = "Zoom",
- [KEY_MODE] = "Mode", [KEY_KEYBOARD] = "Keyboard",
- [KEY_SCREEN] = "Screen", [KEY_PC] = "PC",
- [KEY_TV] = "TV", [KEY_TV2] = "TV2",
- [KEY_VCR] = "VCR", [KEY_VCR2] = "VCR2",
- [KEY_SAT] = "Sat", [KEY_SAT2] = "Sat2",
- [KEY_CD] = "CD", [KEY_TAPE] = "Tape",
- [KEY_RADIO] = "Radio", [KEY_TUNER] = "Tuner",
- [KEY_PLAYER] = "Player", [KEY_TEXT] = "Text",
- [KEY_DVD] = "DVD", [KEY_AUX] = "Aux",
- [KEY_MP3] = "MP3", [KEY_AUDIO] = "Audio",
- [KEY_VIDEO] = "Video", [KEY_DIRECTORY] = "Directory",
- [KEY_LIST] = "List", [KEY_MEMO] = "Memo",
- [KEY_CALENDAR] = "Calendar", [KEY_RED] = "Red",
- [KEY_GREEN] = "Green", [KEY_YELLOW] = "Yellow",
- [KEY_BLUE] = "Blue", [KEY_CHANNELUP] = "ChannelUp",
- [KEY_CHANNELDOWN] = "ChannelDown", [KEY_FIRST] = "First",
- [KEY_LAST] = "Last", [KEY_AB] = "AB",
- [KEY_NEXT] = "Next", [KEY_RESTART] = "Restart",
- [KEY_SLOW] = "Slow", [KEY_SHUFFLE] = "Shuffle",
- [KEY_BREAK] = "Break", [KEY_PREVIOUS] = "Previous",
- [KEY_DIGITS] = "Digits", [KEY_TEEN] = "TEEN",
- [KEY_TWEN] = "TWEN", [KEY_DEL_EOL] = "DeleteEOL",
- [KEY_DEL_EOS] = "DeleteEOS", [KEY_INS_LINE] = "InsertLine",
- [KEY_DEL_LINE] = "DeleteLine",
- [KEY_SEND] = "Send", [KEY_REPLY] = "Reply",
- [KEY_FORWARDMAIL] = "ForwardMail", [KEY_SAVE] = "Save",
- [KEY_DOCUMENTS] = "Documents",
- [KEY_FN] = "Fn", [KEY_FN_ESC] = "Fn+ESC",
- [KEY_FN_1] = "Fn+1", [KEY_FN_2] = "Fn+2",
- [KEY_FN_B] = "Fn+B", [KEY_FN_D] = "Fn+D",
- [KEY_FN_E] = "Fn+E", [KEY_FN_F] = "Fn+F",
- [KEY_FN_S] = "Fn+S",
- [KEY_FN_F1] = "Fn+F1", [KEY_FN_F2] = "Fn+F2",
- [KEY_FN_F3] = "Fn+F3", [KEY_FN_F4] = "Fn+F4",
- [KEY_FN_F5] = "Fn+F5", [KEY_FN_F6] = "Fn+F6",
- [KEY_FN_F7] = "Fn+F7", [KEY_FN_F8] = "Fn+F8",
- [KEY_FN_F9] = "Fn+F9", [KEY_FN_F10] = "Fn+F10",
- [KEY_FN_F11] = "Fn+F11", [KEY_FN_F12] = "Fn+F12",
- [KEY_KBDILLUMTOGGLE] = "KbdIlluminationToggle",
- [KEY_KBDILLUMDOWN] = "KbdIlluminationDown",
- [KEY_KBDILLUMUP] = "KbdIlluminationUp",
- [KEY_SWITCHVIDEOMODE] = "SwitchVideoMode",
-};
-
-static char *relatives[REL_MAX + 1] = {
- [REL_X] = "X", [REL_Y] = "Y",
- [REL_Z] = "Z", [REL_RX] = "Rx",
- [REL_RY] = "Ry", [REL_RZ] = "Rz",
- [REL_HWHEEL] = "HWheel", [REL_DIAL] = "Dial",
- [REL_WHEEL] = "Wheel", [REL_MISC] = "Misc",
-};
-
-static char *absolutes[ABS_MAX + 1] = {
- [ABS_X] = "X", [ABS_Y] = "Y",
- [ABS_Z] = "Z", [ABS_RX] = "Rx",
- [ABS_RY] = "Ry", [ABS_RZ] = "Rz",
- [ABS_THROTTLE] = "Throttle", [ABS_RUDDER] = "Rudder",
- [ABS_WHEEL] = "Wheel", [ABS_GAS] = "Gas",
- [ABS_BRAKE] = "Brake", [ABS_HAT0X] = "Hat0X",
- [ABS_HAT0Y] = "Hat0Y", [ABS_HAT1X] = "Hat1X",
- [ABS_HAT1Y] = "Hat1Y", [ABS_HAT2X] = "Hat2X",
- [ABS_HAT2Y] = "Hat2Y", [ABS_HAT3X] = "Hat3X",
- [ABS_HAT3Y] = "Hat 3Y", [ABS_PRESSURE] = "Pressure",
- [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt",
- [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "Tool Width",
- [ABS_VOLUME] = "Volume", [ABS_MISC] = "Misc",
-};
+#ifdef CONFIG_HID_DEBUG
-static char *misc[MSC_MAX + 1] = {
- [MSC_SERIAL] = "Serial", [MSC_PULSELED] = "Pulseled",
- [MSC_GESTURE] = "Gesture", [MSC_RAW] = "RawData"
-};
+void hid_dump_input(struct hid_usage *, __s32);
+void hid_dump_device(struct hid_device *);
+void hid_dump_field(struct hid_field *, int);
+void hid_resolv_usage(unsigned);
+void hid_resolv_event(__u8, __u16);
-static char *leds[LED_MAX + 1] = {
- [LED_NUML] = "NumLock", [LED_CAPSL] = "CapsLock",
- [LED_SCROLLL] = "ScrollLock", [LED_COMPOSE] = "Compose",
- [LED_KANA] = "Kana", [LED_SLEEP] = "Sleep",
- [LED_SUSPEND] = "Suspend", [LED_MUTE] = "Mute",
- [LED_MISC] = "Misc",
-};
+#else
-static char *repeats[REP_MAX + 1] = {
- [REP_DELAY] = "Delay", [REP_PERIOD] = "Period"
-};
+#define hid_dump_input(a,b) do { } while (0)
+#define hid_dump_device(c) do { } while (0)
+#define hid_dump_field(a,b) do { } while (0)
+#define hid_resolv_usage(a) do { } while (0)
+#define hid_resolv_event(a,b) do { } while (0)
-static char *sounds[SND_MAX + 1] = {
- [SND_CLICK] = "Click", [SND_BELL] = "Bell",
- [SND_TONE] = "Tone"
-};
+#endif /* CONFIG_HID_DEBUG */
-static char **names[EV_MAX + 1] = {
- [EV_SYN] = syncs, [EV_KEY] = keys,
- [EV_REL] = relatives, [EV_ABS] = absolutes,
- [EV_MSC] = misc, [EV_LED] = leds,
- [EV_SND] = sounds, [EV_REP] = repeats,
-};
-static void __attribute__((unused)) resolv_event(__u8 type, __u16 code) {
+#endif
- printk("%s.%s", events[type] ? events[type] : "?",
- names[type] ? (names[type][code] ? names[type][code] : "?") : "?");
-}
#define HID_QUIRK_INVERT_HWHEEL 0x00004000
#define HID_QUIRK_POWERBOOK_ISO_KEYBOARD 0x00008000
#define HID_QUIRK_BAD_RELATIVE_KEYS 0x00010000
+#define HID_QUIRK_SKIP_OUTPUT_REPORTS 0x00020000
+#define HID_QUIRK_IGNORE_MOUSE 0x00040000
+#define HID_QUIRK_SONY_PS3_CONTROLLER 0x00080000
/*
* This is the global environment of the parser. This information is
/* device-specific function pointers */
int (*hidinput_input_event) (struct input_dev *, unsigned int, unsigned int, int);
- int (*hidinput_open) (struct input_dev *);
- void (*hidinput_close) (struct input_dev *);
+ int (*hid_open) (struct hid_device *);
+ void (*hid_close) (struct hid_device *);
/* hiddev event handler */
void (*hiddev_hid_event) (struct hid_device *, struct hid_field *field,
struct hid_class_descriptor desc[1];
} __attribute__ ((packed));
-#ifdef DEBUG
-#include "hid-debug.h"
-#else
-#define hid_dump_input(a,b) do { } while (0)
-#define hid_dump_device(c) do { } while (0)
-#define hid_dump_field(a,b) do { } while (0)
-#define resolv_usage(a) do { } while (0)
-#define resolv_event(a,b) do { } while (0)
-#endif
-
/* Applications from HID Usage Tables 4/8/99 Version 1.1 */
/* We ignore a few input applications that are not widely used */
#define IS_INPUT_APPLICATION(a) (((a >= 0x00010000) && (a <= 0x00010008)) || (a == 0x00010080) || (a == 0x000c0001))
int hid_ff_init(struct hid_device *hid);
int hid_lgff_init(struct hid_device *hid);
+int hid_plff_init(struct hid_device *hid);
int hid_tmff_init(struct hid_device *hid);
int hid_zpff_init(struct hid_device *hid);
#ifdef CONFIG_HID_PID
#include <linux/device.h>
#include <linux/pci.h>
#include <linux/completion.h>
+#ifdef CONFIG_BLK_DEV_IDEACPI
+#include <acpi/acpi.h>
+#endif
#include <asm/byteorder.h>
#include <asm/system.h>
#include <asm/io.h>
struct ide_driver_s;
struct ide_settings_s;
+#ifdef CONFIG_BLK_DEV_IDEACPI
+struct ide_acpi_drive_link;
+struct ide_acpi_hwif_link;
+#endif
+
typedef struct ide_drive_s {
char name[4]; /* drive name, such as "hda" */
char driver_req[10]; /* requests specific driver */
int lun; /* logical unit */
int crc_count; /* crc counter to reduce drive speed */
+#ifdef CONFIG_BLK_DEV_IDEACPI
+ struct ide_acpi_drive_link *acpidata;
+#endif
struct list_head list;
struct device gendev;
struct completion gendev_rel_comp; /* to deal with device release() */
void *hwif_data; /* extra hwif data */
unsigned dma;
+
+#ifdef CONFIG_BLK_DEV_IDEACPI
+ struct ide_acpi_hwif_link *acpidata;
+#endif
} ____cacheline_internodealigned_in_smp ide_hwif_t;
/*
extern int ideprobe_init(void);
extern void ide_scan_pcibus(int scan_direction) __init;
-extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner);
-#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE)
+extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *owner, const char *mod_name);
+#define ide_pci_register_driver(d) __ide_pci_register_driver(d, THIS_MODULE, KBUILD_MODNAME)
void ide_pci_setup_ports(struct pci_dev *, struct ide_pci_device_s *, int, ata_index_t *);
extern void ide_setup_pci_noise (struct pci_dev *dev, struct ide_pci_device_s *d);
static inline void ide_release_dma(ide_hwif_t *drive) {;}
#endif
+#ifdef CONFIG_BLK_DEV_IDEACPI
+extern int ide_acpi_exec_tfs(ide_drive_t *drive);
+extern void ide_acpi_get_timing(ide_hwif_t *hwif);
+extern void ide_acpi_push_timing(ide_hwif_t *hwif);
+extern void ide_acpi_init(ide_hwif_t *hwif);
+#else
+static inline int ide_acpi_exec_tfs(ide_drive_t *drive) { return 0; }
+static inline void ide_acpi_get_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_push_timing(ide_hwif_t *hwif) { ; }
+static inline void ide_acpi_init(ide_hwif_t *hwif) { ; }
+#endif
+
extern int ide_hwif_request_regions(ide_hwif_t *hwif);
extern void ide_hwif_release_regions(ide_hwif_t* hwif);
extern void ide_unregister (unsigned int index);
#define IRQ_MOVE_PENDING 0x40000000 /* need to re-target IRQ destination */
struct proc_dir_entry;
+struct msi_desc;
/**
* struct irq_chip - hardware interrupt chip descriptor
struct irq_desc {
irq_flow_handler_t handle_irq;
struct irq_chip *chip;
+ struct msi_desc *msi_desc;
void *handler_data;
void *chip_data;
struct irqaction *action; /* IRQ action list */
extern int set_irq_data(unsigned int irq, void *data);
extern int set_irq_chip_data(unsigned int irq, void *data);
extern int set_irq_type(unsigned int irq, unsigned int type);
+extern int set_irq_msi(unsigned int irq, struct msi_desc *entry);
#define get_irq_chip(irq) (irq_desc[irq].chip)
#define get_irq_chip_data(irq) (irq_desc[irq].chip_data)
#define get_irq_data(irq) (irq_desc[irq].handler_data)
+#define get_irq_msi(irq) (irq_desc[irq].msi_desc)
#endif /* CONFIG_GENERIC_HARDIRQS */
extern void kobject_cleanup(struct kobject *);
extern int __must_check kobject_add(struct kobject *);
+extern int __must_check kobject_shadow_add(struct kobject *, struct dentry *);
extern void kobject_del(struct kobject *);
extern int __must_check kobject_rename(struct kobject *, const char *new_name);
+extern int __must_check kobject_shadow_rename(struct kobject *kobj,
+ struct dentry *new_parent,
+ const char *new_name);
extern int __must_check kobject_move(struct kobject *, struct kobject *);
extern int __must_check kobject_register(struct kobject *);
#define MMC_STATE_SDCARD (1<<3) /* is an SD card */
#define MMC_STATE_READONLY (1<<4) /* card is read-only */
#define MMC_STATE_HIGHSPEED (1<<5) /* card is in high speed mode */
+#define MMC_STATE_BLOCKADDR (1<<6) /* card uses block-addressing */
u32 raw_cid[4]; /* raw card CID */
u32 raw_csd[4]; /* raw card CSD */
u32 raw_scr[2]; /* raw card SCR */
#define mmc_card_sd(c) ((c)->state & MMC_STATE_SDCARD)
#define mmc_card_readonly(c) ((c)->state & MMC_STATE_READONLY)
#define mmc_card_highspeed(c) ((c)->state & MMC_STATE_HIGHSPEED)
+#define mmc_card_blockaddr(c) ((c)->state & MMC_STATE_BLOCKADDR)
#define mmc_card_set_present(c) ((c)->state |= MMC_STATE_PRESENT)
#define mmc_card_set_dead(c) ((c)->state |= MMC_STATE_DEAD)
#define mmc_card_set_sd(c) ((c)->state |= MMC_STATE_SDCARD)
#define mmc_card_set_readonly(c) ((c)->state |= MMC_STATE_READONLY)
#define mmc_card_set_highspeed(c) ((c)->state |= MMC_STATE_HIGHSPEED)
+#define mmc_card_set_blockaddr(c) ((c)->state |= MMC_STATE_BLOCKADDR)
#define mmc_card_name(c) ((c)->cid.prod_name)
#define mmc_card_id(c) ((c)->dev.bus_id)
unsigned int max_seg_size; /* see blk_queue_max_segment_size */
unsigned short max_hw_segs; /* see blk_queue_max_hw_segments */
unsigned short max_phys_segs; /* see blk_queue_max_phys_segments */
- unsigned short max_sectors; /* see blk_queue_max_sectors */
unsigned short unused;
+ unsigned int max_req_size; /* maximum number of bytes in one req */
+ unsigned int max_blk_size; /* maximum size of one mmc block */
+ unsigned int max_blk_count; /* maximum number of blocks in one req */
/* private data */
struct mmc_ios ios; /* current io bus settings */
struct list_head cards; /* devices attached to this host */
wait_queue_head_t wq;
- spinlock_t lock; /* card_busy lock */
- struct mmc_card *card_busy; /* the MMC card claiming host */
+ spinlock_t lock; /* claimed lock */
+ unsigned int claimed:1; /* host exclusively claimed */
+
struct mmc_card *card_selected; /* the selected MMC card */
struct delayed_work detect;
}
#define mmc_dev(x) ((x)->parent)
+#define mmc_classdev(x) (&(x)->class_dev)
#define mmc_hostname(x) ((x)->class_dev.bus_id)
extern int mmc_suspend_host(struct mmc_host *, pm_message_t);
#define MMC_RSP_R2 (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC)
#define MMC_RSP_R3 (MMC_RSP_PRESENT)
#define MMC_RSP_R6 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
+#define MMC_RSP_R7 (MMC_RSP_PRESENT|MMC_RSP_CRC|MMC_RSP_OPCODE)
#define mmc_resp_type(cmd) ((cmd)->flags & (MMC_RSP_PRESENT|MMC_RSP_136|MMC_RSP_CRC|MMC_RSP_BUSY|MMC_RSP_OPCODE))
#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1 */
/* SD commands type argument response */
- /* class 8 */
+ /* class 0 */
/* This is basically the same command as for MMC with some quirks. */
#define SD_SEND_RELATIVE_ADDR 3 /* bcr R6 */
+#define SD_SEND_IF_COND 8 /* bcr [11:0] See below R7 */
+
+ /* class 10 */
#define SD_SWITCH 6 /* adtc [31:0] See below R1 */
/* Application commands */
* [3:0] Function group 1
*/
+/*
+ * SD_SEND_IF_COND argument format:
+ *
+ * [31:12] Reserved (0)
+ * [11:8] Host Voltage Supply Flags
+ * [7:0] Check Pattern (0xAA)
+ */
+
/*
MMC status in R1
Type
{
struct kobject kobj;
struct module *mod;
+ struct kobject *drivers_dir;
};
/* These are either module local, or the kernel's dummy ones. */
struct module_attribute *modinfo_attrs;
const char *version;
const char *srcversion;
- struct kobject *drivers_dir;
+ struct kobject *holders_dir;
/* Exported symbols */
const struct kernel_symbol *syms;
u32 data; /* 16 bits of msi message data */
};
-/* Heper functions */
+/* Helper functions */
extern void mask_msi_irq(unsigned int irq);
extern void unmask_msi_irq(unsigned int irq);
extern void read_msi_msg(unsigned int irq, struct msi_msg *msg);
-
extern void write_msi_msg(unsigned int irq, struct msi_msg *msg);
struct msi_desc {
/*
* The arch hook for setup up msi irqs
*/
-int arch_setup_msi_irq(unsigned int irq, struct pci_dev *dev);
+int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *desc);
void arch_teardown_msi_irq(unsigned int irq);
struct net_bridge_port *br_port;
/* class/net/name entry */
- struct class_device class_dev;
+ struct device dev;
/* space for optional statistics and wireless sysfs groups */
struct attribute_group *sysfs_groups[3];
};
+#define to_net_dev(d) container_of(d, struct net_device, dev)
#define NETDEV_ALIGN 32
#define NETDEV_ALIGN_CONST (NETDEV_ALIGN - 1)
/* Set the sysfs physical device reference for the network logical device
* if set prior to registration will cause a symlink during initialization.
*/
-#define SET_NETDEV_DEV(net, pdev) ((net)->class_dev.dev = (pdev))
+#define SET_NETDEV_DEV(net, pdev) ((net)->dev.parent = (pdev))
struct packet_type {
__be16 type; /* This is really htons(ether_type). */
struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */
int rom_attr_enabled; /* has display of the rom attribute been enabled? */
struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */
+#ifdef CONFIG_PCI_MSI
+ unsigned int first_msi_irq;
+#endif
};
#define pci_dev_g(n) list_entry(n, struct pci_dev, global_list)
#define to_pci_dev(n) container_of(n, struct pci_dev, dev)
#define for_each_pci_dev(d) while ((d = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, d)) != NULL)
+static inline int pci_channel_offline(struct pci_dev *pdev)
+{
+ return (pdev->error_state != pci_channel_io_normal);
+}
+
static inline struct pci_cap_saved_state *pci_find_saved_cap(
struct pci_dev *pci_dev,char cap)
{
/* Generic PCI functions exported to card drivers */
-struct pci_dev *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
-struct pci_dev *pci_find_device_reverse (unsigned int vendor, unsigned int device, const struct pci_dev *from);
+struct pci_dev __deprecated *pci_find_device (unsigned int vendor, unsigned int device, const struct pci_dev *from);
struct pci_dev *pci_find_slot (unsigned int bus, unsigned int devfn);
int pci_find_capability (struct pci_dev *dev, int cap);
int pci_find_next_capability (struct pci_dev *dev, u8 pos, int cap);
int __must_check pci_assign_resource(struct pci_dev *dev, int i);
int __must_check pci_assign_resource_fixed(struct pci_dev *dev, int i);
void pci_restore_bars(struct pci_dev *dev);
+int pci_select_bars(struct pci_dev *dev, unsigned long flags);
/* ROM control related routines */
void __iomem __must_check *pci_map_rom(struct pci_dev *pdev, size_t *size);
void pci_release_regions(struct pci_dev *);
int __must_check pci_request_region(struct pci_dev *, int, const char *);
void pci_release_region(struct pci_dev *, int);
+int pci_request_selected_regions(struct pci_dev *, int, const char *);
+void pci_release_selected_regions(struct pci_dev *, int);
/* drivers/pci/bus.c */
int __must_check pci_bus_alloc_resource(struct pci_bus *bus,
void pci_enable_bridges(struct pci_bus *bus);
/* Proper probing supporting hot-pluggable devices */
-int __must_check __pci_register_driver(struct pci_driver *, struct module *);
+int __must_check __pci_register_driver(struct pci_driver *, struct module *,
+ const char *mod_name);
static inline int __must_check pci_register_driver(struct pci_driver *driver)
{
- return __pci_register_driver(driver, THIS_MODULE);
+ return __pci_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
}
void pci_unregister_driver(struct pci_driver *);
strategy_parameter byte boundaries */
};
-#if defined(CONFIG_ISA) || defined(CONFIG_EISA)
-extern struct pci_dev *isa_bridge;
-#endif
-
struct msix_entry {
u16 vector; /* kernel uses to write allocated vector */
u16 entry; /* driver uses to specify entry, OS writes */
#ifndef CONFIG_PCI_MSI
-static inline void pci_scan_msi_device(struct pci_dev *dev) {}
static inline int pci_enable_msi(struct pci_dev *dev) {return -1;}
static inline void pci_disable_msi(struct pci_dev *dev) {}
static inline int pci_enable_msix(struct pci_dev* dev,
static inline void pci_disable_msix(struct pci_dev *dev) {}
static inline void msi_remove_pci_irq_vectors(struct pci_dev *dev) {}
#else
-extern void pci_scan_msi_device(struct pci_dev *dev);
extern int pci_enable_msi(struct pci_dev *dev);
extern void pci_disable_msi(struct pci_dev *dev);
extern int pci_enable_msix(struct pci_dev* dev,
static inline pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state) { return PCI_D0; }
static inline int pci_enable_wake(struct pci_dev *dev, pci_power_t state, int enable) { return 0; }
-#define isa_bridge ((struct pci_dev *)NULL)
-
#define pci_dma_burst_advice(pdev, strat, strategy_parameter) do { } while (0)
static inline void pci_block_user_cfg_access(struct pci_dev *dev) { }
#define PCI_DEVICE_ID_TI_TVP4020 0x3d07
#define PCI_DEVICE_ID_TI_4450 0x8011
#define PCI_DEVICE_ID_TI_XX21_XX11 0x8031
+#define PCI_DEVICE_ID_TI_XX21_XX11_FM 0x8033
#define PCI_DEVICE_ID_TI_XX21_XX11_SD 0x8034
#define PCI_DEVICE_ID_TI_X515 0x8036
#define PCI_DEVICE_ID_TI_XX12 0x8039
+#define PCI_DEVICE_ID_TI_XX12_FM 0x803b
#define PCI_DEVICE_ID_TI_1130 0xac12
#define PCI_DEVICE_ID_TI_1031 0xac13
#define PCI_DEVICE_ID_TI_1131 0xac15
#define PCI_DEVICE_ID_TI_1510 0xac56
#define PCI_DEVICE_ID_TI_X620 0xac8d
#define PCI_DEVICE_ID_TI_X420 0xac8e
+#define PCI_DEVICE_ID_TI_XX20_FM 0xac8f
#define PCI_VENDOR_ID_SONY 0x104d
#define PCI_VENDOR_ID_TOSHIBA_2 0x102f
#define PCI_DEVICE_ID_TOSHIBA_TC35815CF 0x0030
+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE 0x0105
#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC 0x0108
#define PCI_DEVICE_ID_TOSHIBA_SPIDER_NET 0x01b3
#define PCI_DEVICE_ID_TOPIC_TP560 0x0000
#define PCI_VENDOR_ID_ENE 0x1524
+#define PCI_DEVICE_ID_ENE_CB712_SD 0x0550
#define PCI_DEVICE_ID_ENE_1211 0x1211
#define PCI_DEVICE_ID_ENE_1225 0x1225
#define PCI_DEVICE_ID_ENE_1410 0x1410
#define PCI_VENDOR_ID_TDI 0x192E
#define PCI_DEVICE_ID_TDI_EHCI 0x0101
+#define PCI_VENDOR_ID_PASEMI 0x1959
+
#define PCI_VENDOR_ID_JMICRON 0x197B
#define PCI_DEVICE_ID_JMICRON_JMB360 0x2360
#define PCI_DEVICE_ID_JMICRON_JMB361 0x2361
void serio_unregister_port(struct serio *serio);
void serio_unregister_child_port(struct serio *serio);
+int __serio_register_driver(struct serio_driver *drv, struct module *owner, const char *mod_name);
+static inline int serio_register_driver(struct serio_driver *drv)
+{
+ return __serio_register_driver(drv, THIS_MODULE, KBUILD_MODNAME);
+}
int serio_register_driver(struct serio_driver *drv);
void serio_unregister_driver(struct serio_driver *drv);
* message's completion function when the transaction completes.
*/
struct spi_master {
- struct class_device cdev;
+ struct device dev;
/* other than negative (== assign one dynamically), bus_num is fully
* board-specific. usually that simplifies to being SOC-specific.
static inline void *spi_master_get_devdata(struct spi_master *master)
{
- return class_get_devdata(&master->cdev);
+ return dev_get_drvdata(&master->dev);
}
static inline void spi_master_set_devdata(struct spi_master *master, void *data)
{
- class_set_devdata(&master->cdev, data);
+ dev_set_drvdata(&master->dev, data);
}
static inline struct spi_master *spi_master_get(struct spi_master *master)
{
- if (!master || !class_device_get(&master->cdev))
+ if (!master || !get_device(&master->dev))
return NULL;
return master;
}
static inline void spi_master_put(struct spi_master *master)
{
if (master)
- class_device_put(&master->cdev);
+ put_device(&master->dev);
}
#define _SYSFS_H_
#include <linux/compiler.h>
+#include <linux/list.h>
#include <asm/atomic.h>
struct kobject;
struct module;
+struct nameidata;
struct attribute {
const char * name;
#ifdef CONFIG_SYSFS
extern int __must_check
-sysfs_create_dir(struct kobject *);
+sysfs_create_dir(struct kobject *, struct dentry *);
extern void
sysfs_remove_dir(struct kobject *);
extern int __must_check
-sysfs_rename_dir(struct kobject *, const char *new_name);
+sysfs_rename_dir(struct kobject *, struct dentry *, const char *new_name);
extern int __must_check
sysfs_move_dir(struct kobject *, struct kobject *);
void sysfs_remove_group(struct kobject *, const struct attribute_group *);
void sysfs_notify(struct kobject * k, char *dir, char *attr);
+
+extern int sysfs_make_shadowed_dir(struct kobject *kobj,
+ void * (*follow_link)(struct dentry *, struct nameidata *));
+extern struct dentry *sysfs_create_shadow_dir(struct kobject *kobj);
+extern void sysfs_remove_shadow_dir(struct dentry *dir);
+
extern int __must_check sysfs_init(void);
#else /* CONFIG_SYSFS */
-static inline int sysfs_create_dir(struct kobject * k)
+static inline int sysfs_create_dir(struct kobject * k, struct dentry *shadow)
{
return 0;
}
;
}
-static inline int sysfs_rename_dir(struct kobject * k, const char *new_name)
+static inline int sysfs_rename_dir(struct kobject * k,
+ struct dentry *new_parent,
+ const char *new_name)
{
return 0;
}
{
}
+static inline int sysfs_make_shadowed_dir(struct kobject *kobj,
+ void * (*follow_link)(struct dentry *, struct nameidata *))
+{
+ return 0;
+}
+
static inline int __must_check sysfs_init(void)
{
return 0;
#include <linux/wait.h>
#include <linux/delay.h>
#include <linux/pci.h>
-#include <linux/scatterlist.h>
+#include <linux/kthread.h>
/* Host registers (relative to pci base address): */
enum {
#define TIFM_IRQ_ENABLE 0x80000000
-#define TIFM_IRQ_SOCKMASK 0x00000001
-#define TIFM_IRQ_CARDMASK 0x00000100
-#define TIFM_IRQ_FIFOMASK 0x00010000
+#define TIFM_IRQ_SOCKMASK(x) (x)
+#define TIFM_IRQ_CARDMASK(x) ((x) << 8)
+#define TIFM_IRQ_FIFOMASK(x) ((x) << 16)
#define TIFM_IRQ_SETALL 0xffffffff
-#define TIFM_IRQ_SETALLSOCK 0x0000000f
#define TIFM_CTRL_LED 0x00000040
#define TIFM_CTRL_FAST_CLK 0x00000100
char __iomem *addr;
spinlock_t lock;
tifm_media_id media_id;
- char wq_name[KOBJ_NAME_LEN];
- struct workqueue_struct *wq;
+ unsigned int socket_id;
- unsigned int (*signal_irq)(struct tifm_dev *sock,
+ void (*signal_irq)(struct tifm_dev *sock,
unsigned int sock_irq_status);
struct tifm_driver *drv;
tifm_media_id *id_table;
int (*probe)(struct tifm_dev *dev);
void (*remove)(struct tifm_dev *dev);
+ int (*suspend)(struct tifm_dev *dev,
+ pm_message_t state);
+ int (*resume)(struct tifm_dev *dev);
struct device_driver driver;
};
struct tifm_adapter {
char __iomem *addr;
- unsigned int irq_status;
- unsigned int insert_mask;
- unsigned int remove_mask;
spinlock_t lock;
+ unsigned int irq_status;
+ unsigned int socket_change_set;
+ wait_queue_head_t change_set_notify;
unsigned int id;
- unsigned int max_sockets;
- char wq_name[KOBJ_NAME_LEN];
- unsigned int inhibit_new_cards;
- struct workqueue_struct *wq;
- struct work_struct media_inserter;
- struct work_struct media_remover;
+ unsigned int num_sockets;
struct tifm_dev **sockets;
+ struct task_struct *media_switcher;
struct class_device cdev;
struct device *dev;
struct tifm_adapter *tifm_alloc_adapter(void);
void tifm_free_device(struct device *dev);
void tifm_free_adapter(struct tifm_adapter *fm);
-int tifm_add_adapter(struct tifm_adapter *fm);
+int tifm_add_adapter(struct tifm_adapter *fm, int (*mediathreadfn)(void *data));
void tifm_remove_adapter(struct tifm_adapter *fm);
-struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm, unsigned int id);
+struct tifm_dev *tifm_alloc_device(struct tifm_adapter *fm);
int tifm_register_driver(struct tifm_driver *drv);
void tifm_unregister_driver(struct tifm_driver *drv);
void tifm_eject(struct tifm_dev *sock);
#define __LINUX_USB_H
#include <linux/mod_devicetable.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
#define USB_MAJOR 180
#define USB_DEVICE_MAJOR 189
* @needs_remote_wakeup: flag set when the driver requires remote-wakeup
* capability during autosuspend.
* @dev: driver model's view of this device
- * @class_dev: driver model's class view of this device.
+ * @usb_dev: if an interface is bound to the USB major, this will point
+ * to the sysfs representation for that device.
* @pm_usage_cnt: PM usage counter for this interface; autosuspend is not
* allowed unless the counter is 0.
*
unsigned needs_remote_wakeup:1; /* driver requires remote wakeup */
struct device dev; /* interface specific device info */
- struct class_device *class_dev;
+ struct device *usb_dev; /* pointer to the usb class's device, if any */
int pm_usage_cnt; /* usage counter for autosuspend */
};
#define to_usb_interface(d) container_of(d, struct usb_interface, dev)
char *serial; /* iSerialNumber string, if present */
struct list_head filelist;
- struct class_device *class_dev;
+ struct device *usbfs_dev;
struct dentry *usbfs_dentry; /* usbfs dentry entry for the device */
/*
struct usb_interface *iface);
const struct usb_device_id *usb_match_id(struct usb_interface *interface,
const struct usb_device_id *id);
+extern int usb_match_one_id(struct usb_interface *interface,
+ const struct usb_device_id *id);
extern struct usb_interface *usb_find_interface(struct usb_driver *drv,
int minor);
USB_ENDPOINT_XFER_BULK);
}
+/**
+ * usb_endpoint_xfer_control - check if the endpoint has control transfer type
+ * @epd: endpoint to be checked
+ *
+ * Returns true if the endpoint is of type control, otherwise it returns false.
+ */
+static inline int usb_endpoint_xfer_control(const struct usb_endpoint_descriptor *epd)
+{
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_CONTROL);
+}
+
/**
* usb_endpoint_xfer_int - check if the endpoint has interrupt transfer type
* @epd: endpoint to be checked
/* ----------------------------------------------------------------------- */
+/* Stuff for dynamic usb ids */
struct usb_dynids {
spinlock_t lock;
struct list_head list;
};
+struct usb_dynid {
+ struct list_head node;
+ struct usb_device_id id;
+};
+
+extern ssize_t usb_store_new_id(struct usb_dynids *dynids,
+ struct device_driver *driver,
+ const char *buf, size_t count);
+
/**
* struct usbdrv_wrap - wrapper for driver-model structure
* @driver: The driver-model core driver structure.
* use these in module_init()/module_exit()
* and don't forget MODULE_DEVICE_TABLE(usb, ...)
*/
-extern int usb_register_driver(struct usb_driver *, struct module *);
+extern int usb_register_driver(struct usb_driver *, struct module *,
+ const char *);
static inline int usb_register(struct usb_driver *driver)
{
- return usb_register_driver(driver, THIS_MODULE);
+ return usb_register_driver(driver, THIS_MODULE, KBUILD_MODNAME);
}
extern void usb_deregister(struct usb_driver *);
struct kref kref; /* reference count of the URB */
spinlock_t lock; /* lock for the URB */
void *hcpriv; /* private data for host controller */
- int bandwidth; /* bandwidth for INT/ISO request */
atomic_t use_count; /* concurrent submissions counter */
u8 reject; /* submissions will fail */
--- /dev/null
+unifdef-y += audio.h
+unifdef-y += cdc.h
+unifdef-y += ch9.h
+unifdef-y += midi.h
+
--- /dev/null
+/*
+ * This file holds USB constants and structures that are needed for USB
+ * device APIs. These are used by the USB device model, which is defined
+ * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C
+ * that need these:
+ *
+ * - the master/host side Linux-USB kernel driver API;
+ * - the "usbfs" user space API; and
+ * - the Linux "gadget" slave/device/peripheral side driver API.
+ *
+ * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
+ * act either as a USB master/host or as a USB slave/device. That means
+ * the master and slave side APIs benefit from working well together.
+ *
+ * There's also "Wireless USB", using low power short range radios for
+ * peripheral interconnection but otherwise building on the USB framework.
+ */
+
+#ifndef __LINUX_USB_CH9_H
+#define __LINUX_USB_CH9_H
+
+#include <linux/types.h> /* __u8 etc */
+
+/*-------------------------------------------------------------------------*/
+
+/* CONTROL REQUEST SUPPORT */
+
+/*
+ * USB directions
+ *
+ * This bit flag is used in endpoint descriptors' bEndpointAddress field.
+ * It's also one of three fields in control requests bRequestType.
+ */
+#define USB_DIR_OUT 0 /* to device */
+#define USB_DIR_IN 0x80 /* to host */
+
+/*
+ * USB types, the second of three bRequestType fields
+ */
+#define USB_TYPE_MASK (0x03 << 5)
+#define USB_TYPE_STANDARD (0x00 << 5)
+#define USB_TYPE_CLASS (0x01 << 5)
+#define USB_TYPE_VENDOR (0x02 << 5)
+#define USB_TYPE_RESERVED (0x03 << 5)
+
+/*
+ * USB recipients, the third of three bRequestType fields
+ */
+#define USB_RECIP_MASK 0x1f
+#define USB_RECIP_DEVICE 0x00
+#define USB_RECIP_INTERFACE 0x01
+#define USB_RECIP_ENDPOINT 0x02
+#define USB_RECIP_OTHER 0x03
+/* From Wireless USB 1.0 */
+#define USB_RECIP_PORT 0x04
+#define USB_RECIP_RPIPE 0x05
+
+/*
+ * Standard requests, for the bRequest field of a SETUP packet.
+ *
+ * These are qualified by the bRequestType field, so that for example
+ * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
+ * by a GET_STATUS request.
+ */
+#define USB_REQ_GET_STATUS 0x00
+#define USB_REQ_CLEAR_FEATURE 0x01
+#define USB_REQ_SET_FEATURE 0x03
+#define USB_REQ_SET_ADDRESS 0x05
+#define USB_REQ_GET_DESCRIPTOR 0x06
+#define USB_REQ_SET_DESCRIPTOR 0x07
+#define USB_REQ_GET_CONFIGURATION 0x08
+#define USB_REQ_SET_CONFIGURATION 0x09
+#define USB_REQ_GET_INTERFACE 0x0A
+#define USB_REQ_SET_INTERFACE 0x0B
+#define USB_REQ_SYNCH_FRAME 0x0C
+
+#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
+#define USB_REQ_GET_ENCRYPTION 0x0E
+#define USB_REQ_RPIPE_ABORT 0x0E
+#define USB_REQ_SET_HANDSHAKE 0x0F
+#define USB_REQ_RPIPE_RESET 0x0F
+#define USB_REQ_GET_HANDSHAKE 0x10
+#define USB_REQ_SET_CONNECTION 0x11
+#define USB_REQ_SET_SECURITY_DATA 0x12
+#define USB_REQ_GET_SECURITY_DATA 0x13
+#define USB_REQ_SET_WUSB_DATA 0x14
+#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
+#define USB_REQ_LOOPBACK_DATA_READ 0x16
+#define USB_REQ_SET_INTERFACE_DS 0x17
+
+/*
+ * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
+ * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
+ * are at most sixteen features of each type.)
+ */
+#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
+#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
+#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
+#define USB_DEVICE_BATTERY 2 /* (wireless) */
+#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
+#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
+#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
+#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
+#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+
+#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+
+
+/**
+ * struct usb_ctrlrequest - SETUP data for a USB device control request
+ * @bRequestType: matches the USB bmRequestType field
+ * @bRequest: matches the USB bRequest field
+ * @wValue: matches the USB wValue field (le16 byte order)
+ * @wIndex: matches the USB wIndex field (le16 byte order)
+ * @wLength: matches the USB wLength field (le16 byte order)
+ *
+ * This structure is used to send control requests to a USB device. It matches
+ * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
+ * USB spec for a fuller description of the different fields, and what they are
+ * used for.
+ *
+ * Note that the driver for any interface can issue control requests.
+ * For most devices, interfaces don't coordinate with each other, so
+ * such requests may be made at any time.
+ */
+struct usb_ctrlrequest {
+ __u8 bRequestType;
+ __u8 bRequest;
+ __le16 wValue;
+ __le16 wIndex;
+ __le16 wLength;
+} __attribute__ ((packed));
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
+ * (rarely) accepted by SET_DESCRIPTOR.
+ *
+ * Note that all multi-byte values here are encoded in little endian
+ * byte order "on the wire". But when exposed through Linux-USB APIs,
+ * they've been converted to cpu byte order.
+ */
+
+/*
+ * Descriptor types ... USB 2.0 spec table 9.5
+ */
+#define USB_DT_DEVICE 0x01
+#define USB_DT_CONFIG 0x02
+#define USB_DT_STRING 0x03
+#define USB_DT_INTERFACE 0x04
+#define USB_DT_ENDPOINT 0x05
+#define USB_DT_DEVICE_QUALIFIER 0x06
+#define USB_DT_OTHER_SPEED_CONFIG 0x07
+#define USB_DT_INTERFACE_POWER 0x08
+/* these are from a minor usb 2.0 revision (ECN) */
+#define USB_DT_OTG 0x09
+#define USB_DT_DEBUG 0x0a
+#define USB_DT_INTERFACE_ASSOCIATION 0x0b
+/* these are from the Wireless USB spec */
+#define USB_DT_SECURITY 0x0c
+#define USB_DT_KEY 0x0d
+#define USB_DT_ENCRYPTION_TYPE 0x0e
+#define USB_DT_BOS 0x0f
+#define USB_DT_DEVICE_CAPABILITY 0x10
+#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
+#define USB_DT_WIRE_ADAPTER 0x21
+#define USB_DT_RPIPE 0x22
+
+/* conventional codes for class-specific descriptors */
+#define USB_DT_CS_DEVICE 0x21
+#define USB_DT_CS_CONFIG 0x22
+#define USB_DT_CS_STRING 0x23
+#define USB_DT_CS_INTERFACE 0x24
+#define USB_DT_CS_ENDPOINT 0x25
+
+/* All standard descriptors have these 2 fields at the beginning */
+struct usb_descriptor_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE: Device descriptor */
+struct usb_device_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __le16 idVendor;
+ __le16 idProduct;
+ __le16 bcdDevice;
+ __u8 iManufacturer;
+ __u8 iProduct;
+ __u8 iSerialNumber;
+ __u8 bNumConfigurations;
+} __attribute__ ((packed));
+
+#define USB_DT_DEVICE_SIZE 18
+
+
+/*
+ * Device and/or Interface Class codes
+ * as found in bDeviceClass or bInterfaceClass
+ * and defined by www.usb.org documents
+ */
+#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
+#define USB_CLASS_AUDIO 1
+#define USB_CLASS_COMM 2
+#define USB_CLASS_HID 3
+#define USB_CLASS_PHYSICAL 5
+#define USB_CLASS_STILL_IMAGE 6
+#define USB_CLASS_PRINTER 7
+#define USB_CLASS_MASS_STORAGE 8
+#define USB_CLASS_HUB 9
+#define USB_CLASS_CDC_DATA 0x0a
+#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
+#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
+#define USB_CLASS_VIDEO 0x0e
+#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_MISC 0xef
+#define USB_CLASS_APP_SPEC 0xfe
+#define USB_CLASS_VENDOR_SPEC 0xff
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_CONFIG: Configuration descriptor information.
+ *
+ * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
+ * descriptor type is different. Highspeed-capable devices can look
+ * different depending on what speed they're currently running. Only
+ * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
+ * descriptors.
+ */
+struct usb_config_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumInterfaces;
+ __u8 bConfigurationValue;
+ __u8 iConfiguration;
+ __u8 bmAttributes;
+ __u8 bMaxPower;
+} __attribute__ ((packed));
+
+#define USB_DT_CONFIG_SIZE 9
+
+/* from config descriptor bmAttributes */
+#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
+#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
+#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
+#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_STRING: String descriptor */
+struct usb_string_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wData[1]; /* UTF-16LE encoded */
+} __attribute__ ((packed));
+
+/* note that "string" zero is special, it holds language codes that
+ * the device supports, not Unicode characters.
+ */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE: Interface descriptor */
+struct usb_interface_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bInterfaceNumber;
+ __u8 bAlternateSetting;
+ __u8 bNumEndpoints;
+ __u8 bInterfaceClass;
+ __u8 bInterfaceSubClass;
+ __u8 bInterfaceProtocol;
+ __u8 iInterface;
+} __attribute__ ((packed));
+
+#define USB_DT_INTERFACE_SIZE 9
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENDPOINT: Endpoint descriptor */
+struct usb_endpoint_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEndpointAddress;
+ __u8 bmAttributes;
+ __le16 wMaxPacketSize;
+ __u8 bInterval;
+
+ /* NOTE: these two are _only_ in audio endpoints. */
+ /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
+ __u8 bRefresh;
+ __u8 bSynchAddress;
+} __attribute__ ((packed));
+
+#define USB_DT_ENDPOINT_SIZE 7
+#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
+
+
+/*
+ * Endpoints
+ */
+#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
+#define USB_ENDPOINT_DIR_MASK 0x80
+
+#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL 0
+#define USB_ENDPOINT_XFER_ISOC 1
+#define USB_ENDPOINT_XFER_BULK 2
+#define USB_ENDPOINT_XFER_INT 3
+#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
+struct usb_qualifier_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 bcdUSB;
+ __u8 bDeviceClass;
+ __u8 bDeviceSubClass;
+ __u8 bDeviceProtocol;
+ __u8 bMaxPacketSize0;
+ __u8 bNumConfigurations;
+ __u8 bRESERVED;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_OTG (from OTG 1.0a supplement) */
+struct usb_otg_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes; /* support for HNP, SRP, etc */
+} __attribute__ ((packed));
+
+/* from usb_otg_descriptor.bmAttributes */
+#define USB_OTG_SRP (1 << 0)
+#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
+struct usb_debug_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ /* bulk endpoints with 8 byte maxpacket */
+ __u8 bDebugInEndpoint;
+ __u8 bDebugOutEndpoint;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
+struct usb_interface_assoc_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bFirstInterface;
+ __u8 bInterfaceCount;
+ __u8 bFunctionClass;
+ __u8 bFunctionSubClass;
+ __u8 bFunctionProtocol;
+ __u8 iFunction;
+} __attribute__ ((packed));
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SECURITY: group of wireless security descriptors, including
+ * encryption types available for setting up a CC/association.
+ */
+struct usb_security_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumEncryptionTypes;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
+ * may be retrieved.
+ */
+struct usb_key_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 bKeyData[0];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
+struct usb_encryption_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bEncryptionType;
+#define USB_ENC_TYPE_UNSECURE 0
+#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
+#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
+#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
+ __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
+ __u8 bAuthKeyIndex;
+};
+
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_BOS: group of wireless capabilities */
+struct usb_bos_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __le16 wTotalLength;
+ __u8 bNumDeviceCaps;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
+struct usb_dev_cap_header {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+};
+
+#define USB_CAP_TYPE_WIRELESS_USB 1
+
+struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+
+ __u8 bmAttributes;
+#define USB_WIRELESS_P2P_DRD (1 << 1)
+#define USB_WIRELESS_BEACON_MASK (3 << 2)
+#define USB_WIRELESS_BEACON_SELF (1 << 2)
+#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
+#define USB_WIRELESS_BEACON_NONE (3 << 2)
+ __le16 wPHYRates; /* bit rates, Mbps */
+#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
+#define USB_WIRELESS_PHY_80 (1 << 1)
+#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
+#define USB_WIRELESS_PHY_160 (1 << 3)
+#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
+#define USB_WIRELESS_PHY_320 (1 << 5)
+#define USB_WIRELESS_PHY_400 (1 << 6)
+#define USB_WIRELESS_PHY_480 (1 << 7)
+ __u8 bmTFITXPowerInfo; /* TFI power levels */
+ __u8 bmFFITXPowerInfo; /* FFI power levels */
+ __le16 bmBandGroup;
+ __u8 bReserved;
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
+ * each endpoint descriptor for a wireless device
+ */
+struct usb_wireless_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bMaxBurst;
+ __u8 bMaxSequence;
+ __le16 wMaxStreamDelay;
+ __le16 wOverTheAirPacketSize;
+ __u8 bOverTheAirInterval;
+ __u8 bmCompAttributes;
+#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
+#define USB_ENDPOINT_SWITCH_NO 0
+#define USB_ENDPOINT_SWITCH_SWITCH 1
+#define USB_ENDPOINT_SWITCH_SCALE 2
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
+ * host and a device for connection set up, mutual authentication, and
+ * exchanging short lived session keys. The handshake depends on a CC.
+ */
+struct usb_handshake {
+ __u8 bMessageNumber;
+ __u8 bStatus;
+ __u8 tTKID[3];
+ __u8 bReserved;
+ __u8 CDID[16];
+ __u8 nonce[16];
+ __u8 MIC[8];
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
+ * A CC may also be set up using non-wireless secure channels (including
+ * wired USB!), and some devices may support CCs with multiple hosts.
+ */
+struct usb_connection_context {
+ __u8 CHID[16]; /* persistent host id */
+ __u8 CDID[16]; /* device id (unique w/in host context) */
+ __u8 CK[16]; /* connection key */
+};
+
+/*-------------------------------------------------------------------------*/
+
+/* USB 2.0 defines three speeds, here's how Linux identifies them */
+
+enum usb_device_speed {
+ USB_SPEED_UNKNOWN = 0, /* enumerating */
+ USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
+ USB_SPEED_HIGH, /* usb 2.0 */
+ USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
+};
+
+enum usb_device_state {
+ /* NOTATTACHED isn't in the USB spec, and this state acts
+ * the same as ATTACHED ... but it's clearer this way.
+ */
+ USB_STATE_NOTATTACHED = 0,
+
+ /* chapter 9 and authentication (wireless) device states */
+ USB_STATE_ATTACHED,
+ USB_STATE_POWERED, /* wired */
+ USB_STATE_UNAUTHENTICATED, /* auth */
+ USB_STATE_RECONNECTING, /* auth */
+ USB_STATE_DEFAULT, /* limited function */
+ USB_STATE_ADDRESS,
+ USB_STATE_CONFIGURED, /* most functions */
+
+ USB_STATE_SUSPENDED
+
+ /* NOTE: there are actually four different SUSPENDED
+ * states, returning to POWERED, DEFAULT, ADDRESS, or
+ * CONFIGURED respectively when SOF tokens flow again.
+ */
+};
+
+#endif /* __LINUX_USB_CH9_H */
* memory structure allocation at this point in time.
* @shutdown: pointer to the driver's shutdown function. This will be
* called when the device is removed from the system.
+ * @usb_driver: pointer to the struct usb_driver that controls this
+ * device. This is necessary to allow dynamic ids to be added to
+ * the driver from sysfs.
*
* This structure is defines a USB Serial driver. It provides all of
* the information that the USB serial core code needs. If the function
struct list_head driver_list;
struct device_driver driver;
+ struct usb_driver *usb_driver;
+ struct usb_dynids dynids;
int (*probe) (struct usb_serial *serial, const struct usb_device_id *id);
int (*attach) (struct usb_serial *serial);
+++ /dev/null
-/*
- * This file holds USB constants and structures that are needed for USB
- * device APIs. These are used by the USB device model, which is defined
- * in chapter 9 of the USB 2.0 specification. Linux has several APIs in C
- * that need these:
- *
- * - the master/host side Linux-USB kernel driver API;
- * - the "usbfs" user space API; and
- * - the Linux "gadget" slave/device/peripheral side driver API.
- *
- * USB 2.0 adds an additional "On The Go" (OTG) mode, which lets systems
- * act either as a USB master/host or as a USB slave/device. That means
- * the master and slave side APIs benefit from working well together.
- *
- * There's also "Wireless USB", using low power short range radios for
- * peripheral interconnection but otherwise building on the USB framework.
- */
-
-#ifndef __LINUX_USB_CH9_H
-#define __LINUX_USB_CH9_H
-
-#include <linux/types.h> /* __u8 etc */
-
-/*-------------------------------------------------------------------------*/
-
-/* CONTROL REQUEST SUPPORT */
-
-/*
- * USB directions
- *
- * This bit flag is used in endpoint descriptors' bEndpointAddress field.
- * It's also one of three fields in control requests bRequestType.
- */
-#define USB_DIR_OUT 0 /* to device */
-#define USB_DIR_IN 0x80 /* to host */
-
-/*
- * USB types, the second of three bRequestType fields
- */
-#define USB_TYPE_MASK (0x03 << 5)
-#define USB_TYPE_STANDARD (0x00 << 5)
-#define USB_TYPE_CLASS (0x01 << 5)
-#define USB_TYPE_VENDOR (0x02 << 5)
-#define USB_TYPE_RESERVED (0x03 << 5)
-
-/*
- * USB recipients, the third of three bRequestType fields
- */
-#define USB_RECIP_MASK 0x1f
-#define USB_RECIP_DEVICE 0x00
-#define USB_RECIP_INTERFACE 0x01
-#define USB_RECIP_ENDPOINT 0x02
-#define USB_RECIP_OTHER 0x03
-/* From Wireless USB 1.0 */
-#define USB_RECIP_PORT 0x04
-#define USB_RECIP_RPIPE 0x05
-
-/*
- * Standard requests, for the bRequest field of a SETUP packet.
- *
- * These are qualified by the bRequestType field, so that for example
- * TYPE_CLASS or TYPE_VENDOR specific feature flags could be retrieved
- * by a GET_STATUS request.
- */
-#define USB_REQ_GET_STATUS 0x00
-#define USB_REQ_CLEAR_FEATURE 0x01
-#define USB_REQ_SET_FEATURE 0x03
-#define USB_REQ_SET_ADDRESS 0x05
-#define USB_REQ_GET_DESCRIPTOR 0x06
-#define USB_REQ_SET_DESCRIPTOR 0x07
-#define USB_REQ_GET_CONFIGURATION 0x08
-#define USB_REQ_SET_CONFIGURATION 0x09
-#define USB_REQ_GET_INTERFACE 0x0A
-#define USB_REQ_SET_INTERFACE 0x0B
-#define USB_REQ_SYNCH_FRAME 0x0C
-
-#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
-#define USB_REQ_GET_ENCRYPTION 0x0E
-#define USB_REQ_RPIPE_ABORT 0x0E
-#define USB_REQ_SET_HANDSHAKE 0x0F
-#define USB_REQ_RPIPE_RESET 0x0F
-#define USB_REQ_GET_HANDSHAKE 0x10
-#define USB_REQ_SET_CONNECTION 0x11
-#define USB_REQ_SET_SECURITY_DATA 0x12
-#define USB_REQ_GET_SECURITY_DATA 0x13
-#define USB_REQ_SET_WUSB_DATA 0x14
-#define USB_REQ_LOOPBACK_DATA_WRITE 0x15
-#define USB_REQ_LOOPBACK_DATA_READ 0x16
-#define USB_REQ_SET_INTERFACE_DS 0x17
-
-/*
- * USB feature flags are written using USB_REQ_{CLEAR,SET}_FEATURE, and
- * are read as a bit array returned by USB_REQ_GET_STATUS. (So there
- * are at most sixteen features of each type.)
- */
-#define USB_DEVICE_SELF_POWERED 0 /* (read only) */
-#define USB_DEVICE_REMOTE_WAKEUP 1 /* dev may initiate wakeup */
-#define USB_DEVICE_TEST_MODE 2 /* (wired high speed only) */
-#define USB_DEVICE_BATTERY 2 /* (wireless) */
-#define USB_DEVICE_B_HNP_ENABLE 3 /* (otg) dev may initiate HNP */
-#define USB_DEVICE_WUSB_DEVICE 3 /* (wireless)*/
-#define USB_DEVICE_A_HNP_SUPPORT 4 /* (otg) RH port supports HNP */
-#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
-#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
-
-#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
-
-
-/**
- * struct usb_ctrlrequest - SETUP data for a USB device control request
- * @bRequestType: matches the USB bmRequestType field
- * @bRequest: matches the USB bRequest field
- * @wValue: matches the USB wValue field (le16 byte order)
- * @wIndex: matches the USB wIndex field (le16 byte order)
- * @wLength: matches the USB wLength field (le16 byte order)
- *
- * This structure is used to send control requests to a USB device. It matches
- * the different fields of the USB 2.0 Spec section 9.3, table 9-2. See the
- * USB spec for a fuller description of the different fields, and what they are
- * used for.
- *
- * Note that the driver for any interface can issue control requests.
- * For most devices, interfaces don't coordinate with each other, so
- * such requests may be made at any time.
- */
-struct usb_ctrlrequest {
- __u8 bRequestType;
- __u8 bRequest;
- __le16 wValue;
- __le16 wIndex;
- __le16 wLength;
-} __attribute__ ((packed));
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * STANDARD DESCRIPTORS ... as returned by GET_DESCRIPTOR, or
- * (rarely) accepted by SET_DESCRIPTOR.
- *
- * Note that all multi-byte values here are encoded in little endian
- * byte order "on the wire". But when exposed through Linux-USB APIs,
- * they've been converted to cpu byte order.
- */
-
-/*
- * Descriptor types ... USB 2.0 spec table 9.5
- */
-#define USB_DT_DEVICE 0x01
-#define USB_DT_CONFIG 0x02
-#define USB_DT_STRING 0x03
-#define USB_DT_INTERFACE 0x04
-#define USB_DT_ENDPOINT 0x05
-#define USB_DT_DEVICE_QUALIFIER 0x06
-#define USB_DT_OTHER_SPEED_CONFIG 0x07
-#define USB_DT_INTERFACE_POWER 0x08
-/* these are from a minor usb 2.0 revision (ECN) */
-#define USB_DT_OTG 0x09
-#define USB_DT_DEBUG 0x0a
-#define USB_DT_INTERFACE_ASSOCIATION 0x0b
-/* these are from the Wireless USB spec */
-#define USB_DT_SECURITY 0x0c
-#define USB_DT_KEY 0x0d
-#define USB_DT_ENCRYPTION_TYPE 0x0e
-#define USB_DT_BOS 0x0f
-#define USB_DT_DEVICE_CAPABILITY 0x10
-#define USB_DT_WIRELESS_ENDPOINT_COMP 0x11
-#define USB_DT_WIRE_ADAPTER 0x21
-#define USB_DT_RPIPE 0x22
-
-/* conventional codes for class-specific descriptors */
-#define USB_DT_CS_DEVICE 0x21
-#define USB_DT_CS_CONFIG 0x22
-#define USB_DT_CS_STRING 0x23
-#define USB_DT_CS_INTERFACE 0x24
-#define USB_DT_CS_ENDPOINT 0x25
-
-/* All standard descriptors have these 2 fields at the beginning */
-struct usb_descriptor_header {
- __u8 bLength;
- __u8 bDescriptorType;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE: Device descriptor */
-struct usb_device_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __le16 idVendor;
- __le16 idProduct;
- __le16 bcdDevice;
- __u8 iManufacturer;
- __u8 iProduct;
- __u8 iSerialNumber;
- __u8 bNumConfigurations;
-} __attribute__ ((packed));
-
-#define USB_DT_DEVICE_SIZE 18
-
-
-/*
- * Device and/or Interface Class codes
- * as found in bDeviceClass or bInterfaceClass
- * and defined by www.usb.org documents
- */
-#define USB_CLASS_PER_INTERFACE 0 /* for DeviceClass */
-#define USB_CLASS_AUDIO 1
-#define USB_CLASS_COMM 2
-#define USB_CLASS_HID 3
-#define USB_CLASS_PHYSICAL 5
-#define USB_CLASS_STILL_IMAGE 6
-#define USB_CLASS_PRINTER 7
-#define USB_CLASS_MASS_STORAGE 8
-#define USB_CLASS_HUB 9
-#define USB_CLASS_CDC_DATA 0x0a
-#define USB_CLASS_CSCID 0x0b /* chip+ smart card */
-#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
-#define USB_CLASS_VIDEO 0x0e
-#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
-#define USB_CLASS_APP_SPEC 0xfe
-#define USB_CLASS_VENDOR_SPEC 0xff
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_CONFIG: Configuration descriptor information.
- *
- * USB_DT_OTHER_SPEED_CONFIG is the same descriptor, except that the
- * descriptor type is different. Highspeed-capable devices can look
- * different depending on what speed they're currently running. Only
- * devices with a USB_DT_DEVICE_QUALIFIER have any OTHER_SPEED_CONFIG
- * descriptors.
- */
-struct usb_config_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumInterfaces;
- __u8 bConfigurationValue;
- __u8 iConfiguration;
- __u8 bmAttributes;
- __u8 bMaxPower;
-} __attribute__ ((packed));
-
-#define USB_DT_CONFIG_SIZE 9
-
-/* from config descriptor bmAttributes */
-#define USB_CONFIG_ATT_ONE (1 << 7) /* must be set */
-#define USB_CONFIG_ATT_SELFPOWER (1 << 6) /* self powered */
-#define USB_CONFIG_ATT_WAKEUP (1 << 5) /* can wakeup */
-#define USB_CONFIG_ATT_BATTERY (1 << 4) /* battery powered */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_STRING: String descriptor */
-struct usb_string_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wData[1]; /* UTF-16LE encoded */
-} __attribute__ ((packed));
-
-/* note that "string" zero is special, it holds language codes that
- * the device supports, not Unicode characters.
- */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE: Interface descriptor */
-struct usb_interface_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bInterfaceNumber;
- __u8 bAlternateSetting;
- __u8 bNumEndpoints;
- __u8 bInterfaceClass;
- __u8 bInterfaceSubClass;
- __u8 bInterfaceProtocol;
- __u8 iInterface;
-} __attribute__ ((packed));
-
-#define USB_DT_INTERFACE_SIZE 9
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENDPOINT: Endpoint descriptor */
-struct usb_endpoint_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEndpointAddress;
- __u8 bmAttributes;
- __le16 wMaxPacketSize;
- __u8 bInterval;
-
- /* NOTE: these two are _only_ in audio endpoints. */
- /* use USB_DT_ENDPOINT*_SIZE in bLength, not sizeof. */
- __u8 bRefresh;
- __u8 bSynchAddress;
-} __attribute__ ((packed));
-
-#define USB_DT_ENDPOINT_SIZE 7
-#define USB_DT_ENDPOINT_AUDIO_SIZE 9 /* Audio extension */
-
-
-/*
- * Endpoints
- */
-#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
-#define USB_ENDPOINT_DIR_MASK 0x80
-
-#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL 0
-#define USB_ENDPOINT_XFER_ISOC 1
-#define USB_ENDPOINT_XFER_BULK 2
-#define USB_ENDPOINT_XFER_INT 3
-#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
-struct usb_qualifier_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 bcdUSB;
- __u8 bDeviceClass;
- __u8 bDeviceSubClass;
- __u8 bDeviceProtocol;
- __u8 bMaxPacketSize0;
- __u8 bNumConfigurations;
- __u8 bRESERVED;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_OTG (from OTG 1.0a supplement) */
-struct usb_otg_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bmAttributes; /* support for HNP, SRP, etc */
-} __attribute__ ((packed));
-
-/* from usb_otg_descriptor.bmAttributes */
-#define USB_OTG_SRP (1 << 0)
-#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
-struct usb_debug_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- /* bulk endpoints with 8 byte maxpacket */
- __u8 bDebugInEndpoint;
- __u8 bDebugOutEndpoint;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_INTERFACE_ASSOCIATION: groups interfaces */
-struct usb_interface_assoc_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bFirstInterface;
- __u8 bInterfaceCount;
- __u8 bFunctionClass;
- __u8 bFunctionSubClass;
- __u8 bFunctionProtocol;
- __u8 iFunction;
-} __attribute__ ((packed));
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_SECURITY: group of wireless security descriptors, including
- * encryption types available for setting up a CC/association.
- */
-struct usb_security_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumEncryptionTypes;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_KEY: used with {GET,SET}_SECURITY_DATA; only public keys
- * may be retrieved.
- */
-struct usb_key_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 bKeyData[0];
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_ENCRYPTION_TYPE: bundled in DT_SECURITY groups */
-struct usb_encryption_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bEncryptionType;
-#define USB_ENC_TYPE_UNSECURE 0
-#define USB_ENC_TYPE_WIRED 1 /* non-wireless mode */
-#define USB_ENC_TYPE_CCM_1 2 /* aes128/cbc session */
-#define USB_ENC_TYPE_RSA_1 3 /* rsa3072/sha1 auth */
- __u8 bEncryptionValue; /* use in SET_ENCRYPTION */
- __u8 bAuthKeyIndex;
-};
-
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_BOS: group of wireless capabilities */
-struct usb_bos_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __le16 wTotalLength;
- __u8 bNumDeviceCaps;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
-struct usb_dev_cap_header {
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-};
-
-#define USB_CAP_TYPE_WIRELESS_USB 1
-
-struct usb_wireless_cap_descriptor { /* Ultra Wide Band */
- __u8 bLength;
- __u8 bDescriptorType;
- __u8 bDevCapabilityType;
-
- __u8 bmAttributes;
-#define USB_WIRELESS_P2P_DRD (1 << 1)
-#define USB_WIRELESS_BEACON_MASK (3 << 2)
-#define USB_WIRELESS_BEACON_SELF (1 << 2)
-#define USB_WIRELESS_BEACON_DIRECTED (2 << 2)
-#define USB_WIRELESS_BEACON_NONE (3 << 2)
- __le16 wPHYRates; /* bit rates, Mbps */
-#define USB_WIRELESS_PHY_53 (1 << 0) /* always set */
-#define USB_WIRELESS_PHY_80 (1 << 1)
-#define USB_WIRELESS_PHY_107 (1 << 2) /* always set */
-#define USB_WIRELESS_PHY_160 (1 << 3)
-#define USB_WIRELESS_PHY_200 (1 << 4) /* always set */
-#define USB_WIRELESS_PHY_320 (1 << 5)
-#define USB_WIRELESS_PHY_400 (1 << 6)
-#define USB_WIRELESS_PHY_480 (1 << 7)
- __u8 bmTFITXPowerInfo; /* TFI power levels */
- __u8 bmFFITXPowerInfo; /* FFI power levels */
- __le16 bmBandGroup;
- __u8 bReserved;
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
- * each endpoint descriptor for a wireless device
- */
-struct usb_wireless_ep_comp_descriptor {
- __u8 bLength;
- __u8 bDescriptorType;
-
- __u8 bMaxBurst;
- __u8 bMaxSequence;
- __le16 wMaxStreamDelay;
- __le16 wOverTheAirPacketSize;
- __u8 bOverTheAirInterval;
- __u8 bmCompAttributes;
-#define USB_ENDPOINT_SWITCH_MASK 0x03 /* in bmCompAttributes */
-#define USB_ENDPOINT_SWITCH_NO 0
-#define USB_ENDPOINT_SWITCH_SWITCH 1
-#define USB_ENDPOINT_SWITCH_SCALE 2
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_HANDSHAKE is a four-way handshake used between a wireless
- * host and a device for connection set up, mutual authentication, and
- * exchanging short lived session keys. The handshake depends on a CC.
- */
-struct usb_handshake {
- __u8 bMessageNumber;
- __u8 bStatus;
- __u8 tTKID[3];
- __u8 bReserved;
- __u8 CDID[16];
- __u8 nonce[16];
- __u8 MIC[8];
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB_REQ_SET_CONNECTION modifies or revokes a connection context (CC).
- * A CC may also be set up using non-wireless secure channels (including
- * wired USB!), and some devices may support CCs with multiple hosts.
- */
-struct usb_connection_context {
- __u8 CHID[16]; /* persistent host id */
- __u8 CDID[16]; /* device id (unique w/in host context) */
- __u8 CK[16]; /* connection key */
-};
-
-/*-------------------------------------------------------------------------*/
-
-/* USB 2.0 defines three speeds, here's how Linux identifies them */
-
-enum usb_device_speed {
- USB_SPEED_UNKNOWN = 0, /* enumerating */
- USB_SPEED_LOW, USB_SPEED_FULL, /* usb 1.1 */
- USB_SPEED_HIGH, /* usb 2.0 */
- USB_SPEED_VARIABLE, /* wireless (usb 2.5) */
-};
-
-enum usb_device_state {
- /* NOTATTACHED isn't in the USB spec, and this state acts
- * the same as ATTACHED ... but it's clearer this way.
- */
- USB_STATE_NOTATTACHED = 0,
-
- /* chapter 9 and authentication (wireless) device states */
- USB_STATE_ATTACHED,
- USB_STATE_POWERED, /* wired */
- USB_STATE_UNAUTHENTICATED, /* auth */
- USB_STATE_RECONNECTING, /* auth */
- USB_STATE_DEFAULT, /* limited function */
- USB_STATE_ADDRESS,
- USB_STATE_CONFIGURED, /* most functions */
-
- USB_STATE_SUSPENDED
-
- /* NOTE: there are actually four different SUSPENDED
- * states, returning to POWERED, DEFAULT, ADDRESS, or
- * CONFIGURED respectively when SOF tokens flow again.
- */
-};
-
-#endif /* __LINUX_USB_CH9_H */
#include <asm/types.h>
#include <asm/ioctl.h>
-#include <linux/usb_ch9.h>
+#include <linux/usb/ch9.h>
/*
* Filesystem based user-mode API to USB Gadget controller hardware
--- /dev/null
+/*
+ *
+ * Copyright (C) 2006 Luming Yu <luming.yu@intel.com>
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ */
+#ifndef _LINUX_VIDEO_OUTPUT_H
+#define _LINUX_VIDEO_OUTPUT_H
+#include <linux/device.h>
+struct output_device;
+struct output_properties {
+ int (*set_state)(struct output_device *);
+ int (*get_status)(struct output_device *);
+};
+struct output_device {
+ int request_state;
+ struct output_properties *props;
+ struct class_device class_dev;
+};
+#define to_output_device(obj) container_of(obj, struct output_device, class_dev)
+struct output_device *video_output_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct output_properties *op);
+void video_output_unregister(struct output_device *dev);
+#endif
#endif
/* socket device */
- struct class_device dev;
+ struct device dev;
void *driver_data; /* data internal to the socket driver */
};
*/
struct ib_user_mad {
struct ib_user_mad_hdr hdr;
- __u8 data[0];
+ __u64 data[0];
};
/**
#include <linux/device.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
+#include <linux/kref.h>
#include <asm/atomic.h>
#include <asm/scatterlist.h>
enum ib_wc_opcode opcode;
u32 vendor_err;
u32 byte_len;
+ struct ib_qp *qp;
__be32 imm_data;
- u32 qp_num;
u32 src_qp;
int wc_flags;
u16 pkey_index;
desc->chip = &no_irq_chip;
desc->handle_irq = handle_bad_irq;
desc->depth = 1;
+ desc->msi_desc = NULL;
desc->handler_data = NULL;
desc->chip_data = NULL;
desc->action = NULL;
WARN_ON(1);
return;
}
+ desc->msi_desc = NULL;
+ desc->handler_data = NULL;
+ desc->chip_data = NULL;
desc->handle_irq = handle_bad_irq;
desc->chip = &no_irq_chip;
spin_unlock_irqrestore(&desc->lock, flags);
}
EXPORT_SYMBOL(set_irq_data);
+/**
+ * set_irq_data - set irq type data for an irq
+ * @irq: Interrupt number
+ * @data: Pointer to interrupt specific data
+ *
+ * Set the hardware irq controller data for an irq
+ */
+int set_irq_msi(unsigned int irq, struct msi_desc *entry)
+{
+ struct irq_desc *desc;
+ unsigned long flags;
+
+ if (irq >= NR_IRQS) {
+ printk(KERN_ERR
+ "Trying to install msi data for IRQ%d\n", irq);
+ return -EINVAL;
+ }
+ desc = irq_desc + irq;
+ spin_lock_irqsave(&desc->lock, flags);
+ desc->msi_desc = entry;
+ spin_unlock_irqrestore(&desc->lock, flags);
+ return 0;
+}
+
/**
* set_irq_chip_data - set irq chip data for an irq
* @irq: Interrupt number
static int use_module(struct module *a, struct module *b)
{
struct module_use *use;
+ int no_warn;
+
if (b == NULL || already_uses(a, b)) return 1;
if (!strong_try_module_get(b))
use->module_which_uses = a;
list_add(&use->list, &b->modules_which_use_me);
+ no_warn = sysfs_create_link(b->holders_dir, &a->mkobj.kobj, a->name);
return 1;
}
module_put(i);
list_del(&use->list);
kfree(use);
+ sysfs_remove_link(i->holders_dir, mod->name);
/* There can be at most one match. */
break;
}
kfree(mod->modinfo_attrs);
}
-static int mod_sysfs_setup(struct module *mod,
- struct kernel_param *kparam,
- unsigned int num_params)
+static int mod_sysfs_init(struct module *mod)
{
int err;
kobj_set_kset_s(&mod->mkobj, module_subsys);
mod->mkobj.mod = mod;
- /* delay uevent until full sysfs population */
kobject_init(&mod->mkobj.kobj);
+
+out:
+ return err;
+}
+
+static int mod_sysfs_setup(struct module *mod,
+ struct kernel_param *kparam,
+ unsigned int num_params)
+{
+ int err;
+
+ /* delay uevent until full sysfs population */
err = kobject_add(&mod->mkobj.kobj);
if (err)
goto out;
- mod->drivers_dir = kobject_add_dir(&mod->mkobj.kobj, "drivers");
- if (!mod->drivers_dir) {
- err = -ENOMEM;
+ mod->holders_dir = kobject_add_dir(&mod->mkobj.kobj, "holders");
+ if (!mod->holders_dir)
goto out_unreg;
- }
err = module_param_sysfs_setup(mod, kparam, num_params);
if (err)
- goto out_unreg_drivers;
+ goto out_unreg_holders;
err = module_add_modinfo_attrs(mod);
if (err)
out_unreg_param:
module_param_sysfs_remove(mod);
-out_unreg_drivers:
- kobject_unregister(mod->drivers_dir);
+out_unreg_holders:
+ kobject_unregister(mod->holders_dir);
out_unreg:
kobject_del(&mod->mkobj.kobj);
kobject_put(&mod->mkobj.kobj);
{
module_remove_modinfo_attrs(mod);
module_param_sysfs_remove(mod);
- kobject_unregister(mod->drivers_dir);
+ if (mod->mkobj.drivers_dir)
+ kobject_unregister(mod->mkobj.drivers_dir);
+ if (mod->holders_dir)
+ kobject_unregister(mod->holders_dir);
kobject_unregister(&mod->mkobj.kobj);
}
/* Now we've moved module, initialize linked lists, etc. */
module_unload_init(mod);
+ /* Initialize kobject, so we can reference it. */
+ if (mod_sysfs_init(mod) != 0)
+ goto cleanup;
+
/* Set up license info based on the info section */
set_license(mod, get_modinfo(sechdrs, infoindex, "license"));
return driver_name;
}
+static void module_create_drivers_dir(struct module_kobject *mk)
+{
+ if (!mk || mk->drivers_dir)
+ return;
+
+ mk->drivers_dir = kobject_add_dir(&mk->kobj, "drivers");
+}
+
void module_add_driver(struct module *mod, struct device_driver *drv)
{
char *driver_name;
int no_warn;
+ struct module_kobject *mk = NULL;
+
+ if (!drv)
+ return;
+
+ if (mod)
+ mk = &mod->mkobj;
+ else if (drv->mod_name) {
+ struct kobject *mkobj;
+
+ /* Lookup built-in module entry in /sys/modules */
+ mkobj = kset_find_obj(&module_subsys.kset, drv->mod_name);
+ if (mkobj)
+ mk = container_of(mkobj, struct module_kobject, kobj);
+ }
- if (!mod || !drv)
+ if (!mk)
return;
/* Don't check return codes; these calls are idempotent */
- no_warn = sysfs_create_link(&drv->kobj, &mod->mkobj.kobj, "module");
+ no_warn = sysfs_create_link(&drv->kobj, &mk->kobj, "module");
driver_name = make_driver_name(drv);
if (driver_name) {
- no_warn = sysfs_create_link(mod->drivers_dir, &drv->kobj,
+ module_create_drivers_dir(mk);
+ no_warn = sysfs_create_link(mk->drivers_dir, &drv->kobj,
driver_name);
kfree(driver_name);
}
return;
sysfs_remove_link(&drv->kobj, "module");
- if (drv->owner && drv->owner->drivers_dir) {
+ if (drv->owner && drv->owner->mkobj.drivers_dir) {
driver_name = make_driver_name(drv);
if (driver_name) {
- sysfs_remove_link(drv->owner->drivers_dir,
+ sysfs_remove_link(drv->owner->mkobj.drivers_dir,
driver_name);
kfree(driver_name);
}
#define DEBUGP(fmt, a...)
#endif
+static struct kobj_type module_ktype;
+
static inline char dash2underscore(char c)
{
if (c == '-')
mk->mod = THIS_MODULE;
kobj_set_kset_s(mk, module_subsys);
kobject_set_name(&mk->kobj, name);
- ret = kobject_register(&mk->kobj);
+ kobject_init(&mk->kobj);
+ ret = kobject_add(&mk->kobj);
BUG_ON(ret < 0);
-
- /* no need to keep the kobject if no parameter is exported */
- if (!param_sysfs_setup(mk, kparam, num_params, name_skip)) {
- kobject_unregister(&mk->kobj);
- kfree(mk);
- }
+ param_sysfs_setup(mk, kparam, num_params, name_skip);
+ kobject_uevent(&mk->kobj, KOBJ_ADD);
}
/*
.store = module_attr_store,
};
+static int uevent_filter(struct kset *kset, struct kobject *kobj)
+{
+ struct kobj_type *ktype = get_ktype(kobj);
+
+ if (ktype == &module_ktype)
+ return 1;
+ return 0;
+}
+
+static struct kset_uevent_ops module_uevent_ops = {
+ .filter = uevent_filter,
+};
+
#else
static struct sysfs_ops module_sysfs_ops = {
.show = NULL,
.sysfs_ops = &module_sysfs_ops,
};
-decl_subsys(module, &module_ktype, NULL);
+decl_subsys(module, &module_ktype, &module_uevent_ops);
/*
* param_sysfs_init - wrapper for built-in params support
return error;
}
-static int create_dir(struct kobject * kobj)
+static int create_dir(struct kobject * kobj, struct dentry *shadow_parent)
{
int error = 0;
if (kobject_name(kobj)) {
- error = sysfs_create_dir(kobj);
+ error = sysfs_create_dir(kobj, shadow_parent);
if (!error) {
if ((error = populate_dir(kobj)))
sysfs_remove_dir(kobj);
*/
void kobject_init(struct kobject * kobj)
{
+ if (!kobj)
+ return;
kref_init(&kobj->kref);
INIT_LIST_HEAD(&kobj->entry);
init_waitqueue_head(&kobj->poll);
/**
* kobject_add - add an object to the hierarchy.
* @kobj: object.
+ * @shadow_parent: sysfs directory to add to.
*/
-int kobject_add(struct kobject * kobj)
+int kobject_shadow_add(struct kobject * kobj, struct dentry *shadow_parent)
{
int error = 0;
struct kobject * parent;
}
kobj->parent = parent;
- error = create_dir(kobj);
+ error = create_dir(kobj, shadow_parent);
if (error) {
/* unlink does the kobject_put() for us */
unlink(kobj);
- if (parent)
- kobject_put(parent);
+ kobject_put(parent);
/* be noisy on error issues */
if (error == -EEXIST)
return error;
}
+/**
+ * kobject_add - add an object to the hierarchy.
+ * @kobj: object.
+ */
+int kobject_add(struct kobject * kobj)
+{
+ return kobject_shadow_add(kobj, NULL);
+}
+
/**
* kobject_register - initialize and add an object.
kobj = kobject_get(kobj);
if (!kobj)
return -EINVAL;
- error = sysfs_rename_dir(kobj, new_name);
+ if (!kobj->parent)
+ return -EINVAL;
+ error = sysfs_rename_dir(kobj, kobj->parent->dentry, new_name);
+ kobject_put(kobj);
+
+ return error;
+}
+
+/**
+ * kobject_rename - change the name of an object
+ * @kobj: object in question.
+ * @new_name: object's new name
+ */
+
+int kobject_shadow_rename(struct kobject * kobj, struct dentry *new_parent,
+ const char *new_name)
+{
+ int error = 0;
+
+ kobj = kobject_get(kobj);
+ if (!kobj)
+ return -EINVAL;
+ error = sysfs_rename_dir(kobj, new_parent, new_name);
kobject_put(kobj);
return error;
/**
* kobject_move - move object to another parent
* @kobj: object in question.
- * @new_parent: object's new parent
+ * @new_parent: object's new parent (can be NULL)
*/
int kobject_move(struct kobject *kobj, struct kobject *new_parent)
return -EINVAL;
new_parent = kobject_get(new_parent);
if (!new_parent) {
- error = -EINVAL;
- goto out;
+ if (kobj->kset)
+ new_parent = kobject_get(&kobj->kset->kobj);
}
/* old object path */
devpath = kobject_get_path(kobj, GFP_KERNEL);
void kobject_del(struct kobject * kobj)
{
+ if (!kobj)
+ return;
sysfs_remove_dir(kobj);
unlink(kobj);
}
void kobject_unregister(struct kobject * kobj)
{
+ if (!kobj)
+ return;
pr_debug("kobject %s: unregistering\n",kobject_name(kobj));
kobject_uevent(kobj, KOBJ_REMOVE);
kobject_del(kobj);
t->release(kobj);
if (s)
kset_put(s);
- if (parent)
- kobject_put(parent);
+ kobject_put(parent);
}
static void kobject_release(struct kref *kref)
int kset_register(struct kset * k)
{
+ if (!k)
+ return -EINVAL;
kset_init(k);
return kset_add(k);
}
void kset_unregister(struct kset * k)
{
+ if (!k)
+ return;
kobject_unregister(&k->kobj);
}
{
int error;
+ if (!s)
+ return -EINVAL;
+
subsystem_init(s);
pr_debug("subsystem %s: registering\n",s->kset.kobj.name);
void subsystem_unregister(struct subsystem * s)
{
+ if (!s)
+ return;
pr_debug("subsystem %s: unregistering\n",s->kset.kobj.name);
kset_unregister(&s->kset);
}
int subsys_create_file(struct subsystem * s, struct subsys_attribute * a)
{
int error = 0;
+
+ if (!s || !a)
+ return -EINVAL;
+
if (subsys_get(s)) {
error = sysfs_create_file(&s->kset.kobj,&a->attr);
subsys_put(s);
/*
* Dynamic DMA mapping support.
*
- * This implementation is for IA-64 and EM64T platforms that do not support
+ * This implementation is a fallback for platforms that do not support
* I/O TLBs (aka DMA address translation hardware).
* Copyright (C) 2000 Asit Mallick <Asit.K.Mallick@intel.com>
* Copyright (C) 2000 Goutham Rao <goutham.rao@intel.com>
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/scatterlist.h>
+#include <asm/swiotlb.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#define OFFSET(val,align) ((unsigned long) \
( (val) & ( (align) - 1)))
+#ifndef SG_ENT_VIRT_ADDRESS
#define SG_ENT_VIRT_ADDRESS(sg) (page_address((sg)->page) + (sg)->offset)
-#define SG_ENT_PHYS_ADDRESS(SG) virt_to_phys(SG_ENT_VIRT_ADDRESS(SG))
+#define SG_ENT_PHYS_ADDRESS(sg) virt_to_bus(SG_ENT_VIRT_ADDRESS(sg))
+#endif
/*
* Maximum allowable number of contiguous slabs to map,
* We need to save away the original address corresponding to a mapped entry
* for the sync operations.
*/
-static unsigned char **io_tlb_orig_addr;
+#ifndef SWIOTLB_ARCH_HAS_IO_TLB_ADDR_T
+typedef char *io_tlb_addr_t;
+#define swiotlb_orig_addr_null(buffer) (!(buffer))
+#define ptr_to_io_tlb_addr(ptr) (ptr)
+#define page_to_io_tlb_addr(pg, off) (page_address(pg) + (off))
+#define sg_to_io_tlb_addr(sg) SG_ENT_VIRT_ADDRESS(sg)
+#endif
+static io_tlb_addr_t *io_tlb_orig_addr;
/*
* Protect the above data structures in the map and unmap calls
*/
static DEFINE_SPINLOCK(io_tlb_lock);
+#ifdef SWIOTLB_EXTRA_VARIABLES
+SWIOTLB_EXTRA_VARIABLES;
+#endif
+
+#ifndef SWIOTLB_ARCH_HAS_SETUP_IO_TLB_NPAGES
static int __init
setup_io_tlb_npages(char *str)
{
swiotlb_force = 1;
return 1;
}
+#endif
__setup("swiotlb=", setup_io_tlb_npages);
/* make io_tlb_overflow tunable too? */
+#ifndef swiotlb_adjust_size
+#define swiotlb_adjust_size(size) ((void)0)
+#endif
+
+#ifndef swiotlb_adjust_seg
+#define swiotlb_adjust_seg(start, size) ((void)0)
+#endif
+
+#ifndef swiotlb_print_info
+#define swiotlb_print_info(bytes) \
+ printk(KERN_INFO "Placing %luMB software IO TLB between 0x%lx - " \
+ "0x%lx\n", bytes >> 20, \
+ virt_to_bus(io_tlb_start), virt_to_bus(io_tlb_end))
+#endif
+
/*
* Statically reserve bounce buffer space and initialize bounce buffer data
* structures for the software IO TLB used to implement the DMA API.
*/
-void
-swiotlb_init_with_default_size (size_t default_size)
+void __init
+swiotlb_init_with_default_size(size_t default_size)
{
- unsigned long i;
+ unsigned long i, bytes;
if (!io_tlb_nslabs) {
io_tlb_nslabs = (default_size >> IO_TLB_SHIFT);
io_tlb_nslabs = ALIGN(io_tlb_nslabs, IO_TLB_SEGSIZE);
}
+ swiotlb_adjust_size(io_tlb_nslabs);
+ swiotlb_adjust_size(io_tlb_overflow);
+
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
/*
* Get IO TLB memory from the low pages
*/
- io_tlb_start = alloc_bootmem_low_pages(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_start = alloc_bootmem_low_pages(bytes);
if (!io_tlb_start)
panic("Cannot allocate SWIOTLB buffer");
- io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
+ io_tlb_end = io_tlb_start + bytes;
/*
* Allocate and initialize the free list array. This array is used
* between io_tlb_start and io_tlb_end.
*/
io_tlb_list = alloc_bootmem(io_tlb_nslabs * sizeof(int));
- for (i = 0; i < io_tlb_nslabs; i++)
+ for (i = 0; i < io_tlb_nslabs; i++) {
+ if ( !(i % IO_TLB_SEGSIZE) )
+ swiotlb_adjust_seg(io_tlb_start + (i << IO_TLB_SHIFT),
+ IO_TLB_SEGSIZE << IO_TLB_SHIFT);
io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
+ }
io_tlb_index = 0;
- io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(char *));
+ io_tlb_orig_addr = alloc_bootmem(io_tlb_nslabs * sizeof(io_tlb_addr_t));
/*
* Get the overflow emergency buffer
*/
io_tlb_overflow_buffer = alloc_bootmem_low(io_tlb_overflow);
- printk(KERN_INFO "Placing software IO TLB between 0x%lx - 0x%lx\n",
- virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+ if (!io_tlb_overflow_buffer)
+ panic("Cannot allocate SWIOTLB overflow buffer!\n");
+ swiotlb_adjust_seg(io_tlb_overflow_buffer, io_tlb_overflow);
+
+ swiotlb_print_info(bytes);
}
+#ifndef __swiotlb_init_with_default_size
+#define __swiotlb_init_with_default_size swiotlb_init_with_default_size
+#endif
-void
-swiotlb_init (void)
+void __init
+swiotlb_init(void)
{
- swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
+ __swiotlb_init_with_default_size(64 * (1<<20)); /* default to 64MB */
}
+#ifdef SWIOTLB_ARCH_NEED_LATE_INIT
/*
* Systems with larger DMA zones (those that don't support ISA) can
* initialize the swiotlb later using the slab allocator if needed.
* This should be just like above, but with some error catching.
*/
int
-swiotlb_late_init_with_default_size (size_t default_size)
+swiotlb_late_init_with_default_size(size_t default_size)
{
- unsigned long i, req_nslabs = io_tlb_nslabs;
+ unsigned long i, bytes, req_nslabs = io_tlb_nslabs;
unsigned int order;
if (!io_tlb_nslabs) {
/*
* Get IO TLB memory from the low pages
*/
- order = get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ order = get_order(io_tlb_nslabs << IO_TLB_SHIFT);
io_tlb_nslabs = SLABS_PER_PAGE << order;
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
while ((SLABS_PER_PAGE << order) > IO_TLB_MIN_SLABS) {
io_tlb_start = (char *)__get_free_pages(GFP_DMA | __GFP_NOWARN,
if (!io_tlb_start)
goto cleanup1;
- if (order != get_order(io_tlb_nslabs * (1 << IO_TLB_SHIFT))) {
+ if (order != get_order(bytes)) {
printk(KERN_WARNING "Warning: only able to allocate %ld MB "
"for software IO TLB\n", (PAGE_SIZE << order) >> 20);
io_tlb_nslabs = SLABS_PER_PAGE << order;
+ bytes = io_tlb_nslabs << IO_TLB_SHIFT;
}
- io_tlb_end = io_tlb_start + io_tlb_nslabs * (1 << IO_TLB_SHIFT);
- memset(io_tlb_start, 0, io_tlb_nslabs * (1 << IO_TLB_SHIFT));
+ io_tlb_end = io_tlb_start + bytes;
+ memset(io_tlb_start, 0, bytes);
/*
* Allocate and initialize the free list array. This array is used
io_tlb_list[i] = IO_TLB_SEGSIZE - OFFSET(i, IO_TLB_SEGSIZE);
io_tlb_index = 0;
- io_tlb_orig_addr = (unsigned char **)__get_free_pages(GFP_KERNEL,
- get_order(io_tlb_nslabs * sizeof(char *)));
+ io_tlb_orig_addr = (io_tlb_addr_t *)__get_free_pages(GFP_KERNEL,
+ get_order(io_tlb_nslabs * sizeof(io_tlb_addr_t)));
if (!io_tlb_orig_addr)
goto cleanup3;
- memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(char *));
+ memset(io_tlb_orig_addr, 0, io_tlb_nslabs * sizeof(io_tlb_addr_t));
/*
* Get the overflow emergency buffer
if (!io_tlb_overflow_buffer)
goto cleanup4;
- printk(KERN_INFO "Placing %ldMB software IO TLB between 0x%lx - "
- "0x%lx\n", (io_tlb_nslabs * (1 << IO_TLB_SHIFT)) >> 20,
- virt_to_phys(io_tlb_start), virt_to_phys(io_tlb_end));
+ swiotlb_print_info(bytes);
return 0;
cleanup4:
- free_pages((unsigned long)io_tlb_orig_addr, get_order(io_tlb_nslabs *
- sizeof(char *)));
+ free_pages((unsigned long)io_tlb_orig_addr,
+ get_order(io_tlb_nslabs * sizeof(io_tlb_addr_t)));
io_tlb_orig_addr = NULL;
cleanup3:
- free_pages((unsigned long)io_tlb_list, get_order(io_tlb_nslabs *
- sizeof(int)));
+ free_pages((unsigned long)io_tlb_list,
+ get_order(io_tlb_nslabs * sizeof(int)));
io_tlb_list = NULL;
- io_tlb_end = NULL;
cleanup2:
+ io_tlb_end = NULL;
free_pages((unsigned long)io_tlb_start, order);
io_tlb_start = NULL;
cleanup1:
io_tlb_nslabs = req_nslabs;
return -ENOMEM;
}
+#endif
+#ifndef SWIOTLB_ARCH_HAS_NEEDS_MAPPING
static inline int
address_needs_mapping(struct device *hwdev, dma_addr_t addr)
{
return (addr & ~mask) != 0;
}
+static inline int range_needs_mapping(const void *ptr, size_t size)
+{
+ return swiotlb_force;
+}
+
+static inline int order_needs_mapping(unsigned int order)
+{
+ return 0;
+}
+#endif
+
+static void
+__sync_single(io_tlb_addr_t buffer, char *dma_addr, size_t size, int dir)
+{
+#ifndef SWIOTLB_ARCH_HAS_SYNC_SINGLE
+ if (dir == DMA_TO_DEVICE)
+ memcpy(dma_addr, buffer, size);
+ else
+ memcpy(buffer, dma_addr, size);
+#else
+ __swiotlb_arch_sync_single(buffer, dma_addr, size, dir);
+#endif
+}
+
/*
* Allocates bounce buffer and returns its kernel virtual address.
*/
static void *
-map_single(struct device *hwdev, char *buffer, size_t size, int dir)
+map_single(struct device *hwdev, io_tlb_addr_t buffer, size_t size, int dir)
{
unsigned long flags;
char *dma_addr;
*/
io_tlb_orig_addr[index] = buffer;
if (dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL)
- memcpy(dma_addr, buffer, size);
+ __sync_single(buffer, dma_addr, size, DMA_TO_DEVICE);
return dma_addr;
}
unsigned long flags;
int i, count, nslots = ALIGN(size, 1 << IO_TLB_SHIFT) >> IO_TLB_SHIFT;
int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
- char *buffer = io_tlb_orig_addr[index];
+ io_tlb_addr_t buffer = io_tlb_orig_addr[index];
/*
* First, sync the memory before unmapping the entry
*/
- if (buffer && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
+ if (!swiotlb_orig_addr_null(buffer)
+ && ((dir == DMA_FROM_DEVICE) || (dir == DMA_BIDIRECTIONAL)))
/*
* bounce... copy the data back into the original buffer * and
* delete the bounce buffer.
*/
- memcpy(buffer, dma_addr, size);
+ __sync_single(buffer, dma_addr, size, DMA_FROM_DEVICE);
/*
* Return the buffer to the free list by setting the corresponding
int dir, int target)
{
int index = (dma_addr - io_tlb_start) >> IO_TLB_SHIFT;
- char *buffer = io_tlb_orig_addr[index];
+ io_tlb_addr_t buffer = io_tlb_orig_addr[index];
switch (target) {
case SYNC_FOR_CPU:
if (likely(dir == DMA_FROM_DEVICE || dir == DMA_BIDIRECTIONAL))
- memcpy(buffer, dma_addr, size);
+ __sync_single(buffer, dma_addr, size, DMA_FROM_DEVICE);
else
BUG_ON(dir != DMA_TO_DEVICE);
break;
case SYNC_FOR_DEVICE:
if (likely(dir == DMA_TO_DEVICE || dir == DMA_BIDIRECTIONAL))
- memcpy(dma_addr, buffer, size);
+ __sync_single(buffer, dma_addr, size, DMA_TO_DEVICE);
else
BUG_ON(dir != DMA_FROM_DEVICE);
break;
}
}
+#ifdef SWIOTLB_ARCH_NEED_ALLOC
+
void *
swiotlb_alloc_coherent(struct device *hwdev, size_t size,
dma_addr_t *dma_handle, gfp_t flags)
{
- unsigned long dev_addr;
+ dma_addr_t dev_addr;
void *ret;
int order = get_order(size);
*/
flags |= GFP_DMA;
- ret = (void *)__get_free_pages(flags, order);
- if (ret && address_needs_mapping(hwdev, virt_to_phys(ret))) {
+ if (!order_needs_mapping(order))
+ ret = (void *)__get_free_pages(flags, order);
+ else
+ ret = NULL;
+ if (ret && address_needs_mapping(hwdev, virt_to_bus(ret))) {
/*
* The allocated memory isn't reachable by the device.
* Fall back on swiotlb_map_single().
if (swiotlb_dma_mapping_error(handle))
return NULL;
- ret = phys_to_virt(handle);
+ ret = bus_to_virt(handle);
}
memset(ret, 0, size);
- dev_addr = virt_to_phys(ret);
+ dev_addr = virt_to_bus(ret);
/* Confirm address can be DMA'd by device */
if (address_needs_mapping(hwdev, dev_addr)) {
- printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016lx\n",
- (unsigned long long)*hwdev->dma_mask, dev_addr);
+ printk("hwdev DMA mask = 0x%016Lx, dev_addr = 0x%016Lx\n",
+ (unsigned long long)*hwdev->dma_mask,
+ (unsigned long long)dev_addr);
panic("swiotlb_alloc_coherent: allocated memory is out of "
"range for device");
}
*dma_handle = dev_addr;
return ret;
}
+EXPORT_SYMBOL(swiotlb_alloc_coherent);
void
swiotlb_free_coherent(struct device *hwdev, size_t size, void *vaddr,
/* DMA_TO_DEVICE to avoid memcpy in unmap_single */
swiotlb_unmap_single (hwdev, dma_handle, size, DMA_TO_DEVICE);
}
+EXPORT_SYMBOL(swiotlb_free_coherent);
+
+#endif
static void
swiotlb_full(struct device *dev, size_t size, int dir, int do_panic)
* When the mapping is small enough return a static buffer to limit
* the damage, or panic when the transfer is too big.
*/
- printk(KERN_ERR "DMA: Out of SW-IOMMU space for %lu bytes at "
+ printk(KERN_ERR "DMA: Out of SW-IOMMU space for %zu bytes at "
"device %s\n", size, dev ? dev->bus_id : "?");
if (size > io_tlb_overflow && do_panic) {
dma_addr_t
swiotlb_map_single(struct device *hwdev, void *ptr, size_t size, int dir)
{
- unsigned long dev_addr = virt_to_phys(ptr);
+ dma_addr_t dev_addr = virt_to_bus(ptr);
void *map;
BUG_ON(dir == DMA_NONE);
* we can safely return the device addr and not worry about bounce
* buffering it.
*/
- if (!address_needs_mapping(hwdev, dev_addr) && !swiotlb_force)
+ if (!range_needs_mapping(ptr, size)
+ && !address_needs_mapping(hwdev, dev_addr))
return dev_addr;
/*
* Oh well, have to allocate and map a bounce buffer.
*/
- map = map_single(hwdev, ptr, size, dir);
+ map = map_single(hwdev, ptr_to_io_tlb_addr(ptr), size, dir);
if (!map) {
swiotlb_full(hwdev, size, dir, 1);
map = io_tlb_overflow_buffer;
}
- dev_addr = virt_to_phys(map);
+ dev_addr = virt_to_bus(map);
/*
* Ensure that the address returned is DMA'ble
return dev_addr;
}
-/*
- * Since DMA is i-cache coherent, any (complete) pages that were written via
- * DMA can be marked as "clean" so that lazy_mmu_prot_update() doesn't have to
- * flush them when they get mapped into an executable vm-area.
- */
-static void
-mark_clean(void *addr, size_t size)
-{
- unsigned long pg_addr, end;
-
- pg_addr = PAGE_ALIGN((unsigned long) addr);
- end = (unsigned long) addr + size;
- while (pg_addr + PAGE_SIZE <= end) {
- struct page *page = virt_to_page(pg_addr);
- set_bit(PG_arch_1, &page->flags);
- pg_addr += PAGE_SIZE;
- }
-}
-
/*
* Unmap a single streaming mode DMA translation. The dma_addr and size must
* match what was provided for in a previous swiotlb_map_single call. All
swiotlb_unmap_single(struct device *hwdev, dma_addr_t dev_addr, size_t size,
int dir)
{
- char *dma_addr = phys_to_virt(dev_addr);
+ char *dma_addr = bus_to_virt(dev_addr);
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
unmap_single(hwdev, dma_addr, size, dir);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
/*
swiotlb_sync_single(struct device *hwdev, dma_addr_t dev_addr,
size_t size, int dir, int target)
{
- char *dma_addr = phys_to_virt(dev_addr);
+ char *dma_addr = bus_to_virt(dev_addr);
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
void
unsigned long offset, size_t size,
int dir, int target)
{
- char *dma_addr = phys_to_virt(dev_addr) + offset;
+ char *dma_addr = bus_to_virt(dev_addr) + offset;
BUG_ON(dir == DMA_NONE);
if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
sync_single(hwdev, dma_addr, size, dir, target);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(dma_addr, size);
+ dma_mark_clean(dma_addr, size);
}
void
swiotlb_map_sg(struct device *hwdev, struct scatterlist *sg, int nelems,
int dir)
{
- void *addr;
- unsigned long dev_addr;
+ dma_addr_t dev_addr;
int i;
BUG_ON(dir == DMA_NONE);
for (i = 0; i < nelems; i++, sg++) {
- addr = SG_ENT_VIRT_ADDRESS(sg);
- dev_addr = virt_to_phys(addr);
- if (swiotlb_force || address_needs_mapping(hwdev, dev_addr)) {
- void *map = map_single(hwdev, addr, sg->length, dir);
- sg->dma_address = virt_to_bus(map);
+ dev_addr = SG_ENT_PHYS_ADDRESS(sg);
+ if (range_needs_mapping(SG_ENT_VIRT_ADDRESS(sg), sg->length)
+ || address_needs_mapping(hwdev, dev_addr)) {
+ void *map = map_single(hwdev, sg_to_io_tlb_addr(sg), sg->length, dir);
if (!map) {
/* Don't panic here, we expect map_sg users
to do proper error handling. */
sg[0].dma_length = 0;
return 0;
}
+ sg->dma_address = virt_to_bus(map);
} else
sg->dma_address = dev_addr;
sg->dma_length = sg->length;
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
- unmap_single(hwdev, (void *) phys_to_virt(sg->dma_address), sg->dma_length, dir);
+ unmap_single(hwdev, bus_to_virt(sg->dma_address),
+ sg->dma_length, dir);
else if (dir == DMA_FROM_DEVICE)
- mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
+ dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
}
/*
for (i = 0; i < nelems; i++, sg++)
if (sg->dma_address != SG_ENT_PHYS_ADDRESS(sg))
- sync_single(hwdev, (void *) sg->dma_address,
+ sync_single(hwdev, bus_to_virt(sg->dma_address),
sg->dma_length, dir, target);
+ else if (dir == DMA_FROM_DEVICE)
+ dma_mark_clean(SG_ENT_VIRT_ADDRESS(sg), sg->dma_length);
}
void
swiotlb_sync_sg(hwdev, sg, nelems, dir, SYNC_FOR_DEVICE);
}
+#ifdef SWIOTLB_ARCH_NEED_MAP_PAGE
+
+dma_addr_t
+swiotlb_map_page(struct device *hwdev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ dma_addr_t dev_addr;
+ char *map;
+
+ dev_addr = page_to_bus(page) + offset;
+ if (address_needs_mapping(hwdev, dev_addr)) {
+ map = map_single(hwdev, page_to_io_tlb_addr(page, offset), size, direction);
+ if (!map) {
+ swiotlb_full(hwdev, size, direction, 1);
+ map = io_tlb_overflow_buffer;
+ }
+ dev_addr = virt_to_bus(map);
+ }
+
+ return dev_addr;
+}
+
+void
+swiotlb_unmap_page(struct device *hwdev, dma_addr_t dev_addr,
+ size_t size, enum dma_data_direction direction)
+{
+ char *dma_addr = bus_to_virt(dev_addr);
+
+ BUG_ON(direction == DMA_NONE);
+ if (dma_addr >= io_tlb_start && dma_addr < io_tlb_end)
+ unmap_single(hwdev, dma_addr, size, direction);
+ else if (direction == DMA_FROM_DEVICE)
+ dma_mark_clean(dma_addr, size);
+}
+
+#endif
+
int
swiotlb_dma_mapping_error(dma_addr_t dma_addr)
{
- return (dma_addr == virt_to_phys(io_tlb_overflow_buffer));
+ return (dma_addr == virt_to_bus(io_tlb_overflow_buffer));
}
/*
* during bus mastering, then you would pass 0x00ffffff as the mask to
* this function.
*/
+#ifndef __swiotlb_dma_supported
+#define __swiotlb_dma_supported(hwdev, mask) (virt_to_bus(io_tlb_end - 1) <= (mask))
+#endif
int
-swiotlb_dma_supported (struct device *hwdev, u64 mask)
+swiotlb_dma_supported(struct device *hwdev, u64 mask)
{
- return (virt_to_phys (io_tlb_end) - 1) <= mask;
+ return __swiotlb_dma_supported(hwdev, mask);
}
EXPORT_SYMBOL(swiotlb_init);
EXPORT_SYMBOL(swiotlb_sync_sg_for_cpu);
EXPORT_SYMBOL(swiotlb_sync_sg_for_device);
EXPORT_SYMBOL(swiotlb_dma_mapping_error);
-EXPORT_SYMBOL(swiotlb_alloc_coherent);
-EXPORT_SYMBOL(swiotlb_free_coherent);
EXPORT_SYMBOL(swiotlb_dma_supported);
kobject_init(&p->kobj);
kobject_set_name(&p->kobj, SYSFS_BRIDGE_PORT_ATTR);
p->kobj.ktype = &brport_ktype;
- p->kobj.parent = &(dev->class_dev.kobj);
+ p->kobj.parent = &(dev->dev.kobj);
p->kobj.kset = NULL;
return p;
#include "br_private.h"
-#define to_class_dev(obj) container_of(obj,struct class_device,kobj)
-#define to_net_dev(class) container_of(class, struct net_device, class_dev)
+#define to_dev(obj) container_of(obj, struct device, kobj)
#define to_bridge(cd) ((struct net_bridge *)(to_net_dev(cd)->priv))
/*
* Common code for storing bridge parameters.
*/
-static ssize_t store_bridge_parm(struct class_device *cd,
+static ssize_t store_bridge_parm(struct device *d,
const char *buf, size_t len,
void (*set)(struct net_bridge *, unsigned long))
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
char *endp;
unsigned long val;
}
-static ssize_t show_forward_delay(struct class_device *cd, char *buf)
+static ssize_t show_forward_delay(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->forward_delay));
}
br->bridge_forward_delay = delay;
}
-static ssize_t store_forward_delay(struct class_device *cd, const char *buf,
- size_t len)
+static ssize_t store_forward_delay(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return store_bridge_parm(cd, buf, len, set_forward_delay);
+ return store_bridge_parm(d, buf, len, set_forward_delay);
}
-static CLASS_DEVICE_ATTR(forward_delay, S_IRUGO | S_IWUSR,
- show_forward_delay, store_forward_delay);
+static DEVICE_ATTR(forward_delay, S_IRUGO | S_IWUSR,
+ show_forward_delay, store_forward_delay);
-static ssize_t show_hello_time(struct class_device *cd, char *buf)
+static ssize_t show_hello_time(struct device *d, struct device_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%lu\n",
- jiffies_to_clock_t(to_bridge(cd)->hello_time));
+ jiffies_to_clock_t(to_bridge(d)->hello_time));
}
static void set_hello_time(struct net_bridge *br, unsigned long val)
br->bridge_hello_time = t;
}
-static ssize_t store_hello_time(struct class_device *cd, const char *buf,
+static ssize_t store_hello_time(struct device *d,
+ struct device_attribute *attr, const char *buf,
size_t len)
{
- return store_bridge_parm(cd, buf, len, set_hello_time);
+ return store_bridge_parm(d, buf, len, set_hello_time);
}
+static DEVICE_ATTR(hello_time, S_IRUGO | S_IWUSR, show_hello_time,
+ store_hello_time);
-static CLASS_DEVICE_ATTR(hello_time, S_IRUGO | S_IWUSR, show_hello_time,
- store_hello_time);
-
-static ssize_t show_max_age(struct class_device *cd, char *buf)
+static ssize_t show_max_age(struct device *d, struct device_attribute *attr,
+ char *buf)
{
return sprintf(buf, "%lu\n",
- jiffies_to_clock_t(to_bridge(cd)->max_age));
+ jiffies_to_clock_t(to_bridge(d)->max_age));
}
static void set_max_age(struct net_bridge *br, unsigned long val)
br->bridge_max_age = t;
}
-static ssize_t store_max_age(struct class_device *cd, const char *buf,
- size_t len)
+static ssize_t store_max_age(struct device *d, struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return store_bridge_parm(cd, buf, len, set_max_age);
+ return store_bridge_parm(d, buf, len, set_max_age);
}
+static DEVICE_ATTR(max_age, S_IRUGO | S_IWUSR, show_max_age, store_max_age);
-static CLASS_DEVICE_ATTR(max_age, S_IRUGO | S_IWUSR, show_max_age,
- store_max_age);
-
-static ssize_t show_ageing_time(struct class_device *cd, char *buf)
+static ssize_t show_ageing_time(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%lu\n", jiffies_to_clock_t(br->ageing_time));
}
br->ageing_time = clock_t_to_jiffies(val);
}
-static ssize_t store_ageing_time(struct class_device *cd, const char *buf,
- size_t len)
+static ssize_t store_ageing_time(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return store_bridge_parm(cd, buf, len, set_ageing_time);
+ return store_bridge_parm(d, buf, len, set_ageing_time);
}
+static DEVICE_ATTR(ageing_time, S_IRUGO | S_IWUSR, show_ageing_time,
+ store_ageing_time);
-static CLASS_DEVICE_ATTR(ageing_time, S_IRUGO | S_IWUSR, show_ageing_time,
- store_ageing_time);
-static ssize_t show_stp_state(struct class_device *cd, char *buf)
+static ssize_t show_stp_state(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%d\n", br->stp_enabled);
}
br->stp_enabled = val;
}
-static ssize_t store_stp_state(struct class_device *cd,
- const char *buf, size_t len)
+static ssize_t store_stp_state(struct device *d,
+ struct device_attribute *attr, const char *buf,
+ size_t len)
{
- return store_bridge_parm(cd, buf, len, set_stp_state);
+ return store_bridge_parm(d, buf, len, set_stp_state);
}
+static DEVICE_ATTR(stp_state, S_IRUGO | S_IWUSR, show_stp_state,
+ store_stp_state);
-static CLASS_DEVICE_ATTR(stp_state, S_IRUGO | S_IWUSR, show_stp_state,
- store_stp_state);
-
-static ssize_t show_priority(struct class_device *cd, char *buf)
+static ssize_t show_priority(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%d\n",
(br->bridge_id.prio[0] << 8) | br->bridge_id.prio[1]);
}
br_stp_set_bridge_priority(br, (u16) val);
}
-static ssize_t store_priority(struct class_device *cd,
+static ssize_t store_priority(struct device *d, struct device_attribute *attr,
const char *buf, size_t len)
{
- return store_bridge_parm(cd, buf, len, set_priority);
+ return store_bridge_parm(d, buf, len, set_priority);
}
-static CLASS_DEVICE_ATTR(priority, S_IRUGO | S_IWUSR, show_priority,
- store_priority);
+static DEVICE_ATTR(priority, S_IRUGO | S_IWUSR, show_priority, store_priority);
-static ssize_t show_root_id(struct class_device *cd, char *buf)
+static ssize_t show_root_id(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- return br_show_bridge_id(buf, &to_bridge(cd)->designated_root);
+ return br_show_bridge_id(buf, &to_bridge(d)->designated_root);
}
-static CLASS_DEVICE_ATTR(root_id, S_IRUGO, show_root_id, NULL);
+static DEVICE_ATTR(root_id, S_IRUGO, show_root_id, NULL);
-static ssize_t show_bridge_id(struct class_device *cd, char *buf)
+static ssize_t show_bridge_id(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- return br_show_bridge_id(buf, &to_bridge(cd)->bridge_id);
+ return br_show_bridge_id(buf, &to_bridge(d)->bridge_id);
}
-static CLASS_DEVICE_ATTR(bridge_id, S_IRUGO, show_bridge_id, NULL);
+static DEVICE_ATTR(bridge_id, S_IRUGO, show_bridge_id, NULL);
-static ssize_t show_root_port(struct class_device *cd, char *buf)
+static ssize_t show_root_port(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- return sprintf(buf, "%d\n", to_bridge(cd)->root_port);
+ return sprintf(buf, "%d\n", to_bridge(d)->root_port);
}
-static CLASS_DEVICE_ATTR(root_port, S_IRUGO, show_root_port, NULL);
+static DEVICE_ATTR(root_port, S_IRUGO, show_root_port, NULL);
-static ssize_t show_root_path_cost(struct class_device *cd, char *buf)
+static ssize_t show_root_path_cost(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n", to_bridge(cd)->root_path_cost);
+ return sprintf(buf, "%d\n", to_bridge(d)->root_path_cost);
}
-static CLASS_DEVICE_ATTR(root_path_cost, S_IRUGO, show_root_path_cost, NULL);
+static DEVICE_ATTR(root_path_cost, S_IRUGO, show_root_path_cost, NULL);
-static ssize_t show_topology_change(struct class_device *cd, char *buf)
+static ssize_t show_topology_change(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- return sprintf(buf, "%d\n", to_bridge(cd)->topology_change);
+ return sprintf(buf, "%d\n", to_bridge(d)->topology_change);
}
-static CLASS_DEVICE_ATTR(topology_change, S_IRUGO, show_topology_change, NULL);
+static DEVICE_ATTR(topology_change, S_IRUGO, show_topology_change, NULL);
-static ssize_t show_topology_change_detected(struct class_device *cd, char *buf)
+static ssize_t show_topology_change_detected(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%d\n", br->topology_change_detected);
}
-static CLASS_DEVICE_ATTR(topology_change_detected, S_IRUGO, show_topology_change_detected, NULL);
+static DEVICE_ATTR(topology_change_detected, S_IRUGO,
+ show_topology_change_detected, NULL);
-static ssize_t show_hello_timer(struct class_device *cd, char *buf)
+static ssize_t show_hello_timer(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%ld\n", br_timer_value(&br->hello_timer));
}
-static CLASS_DEVICE_ATTR(hello_timer, S_IRUGO, show_hello_timer, NULL);
+static DEVICE_ATTR(hello_timer, S_IRUGO, show_hello_timer, NULL);
-static ssize_t show_tcn_timer(struct class_device *cd, char *buf)
+static ssize_t show_tcn_timer(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%ld\n", br_timer_value(&br->tcn_timer));
}
-static CLASS_DEVICE_ATTR(tcn_timer, S_IRUGO, show_tcn_timer, NULL);
+static DEVICE_ATTR(tcn_timer, S_IRUGO, show_tcn_timer, NULL);
-static ssize_t show_topology_change_timer(struct class_device *cd, char *buf)
+static ssize_t show_topology_change_timer(struct device *d,
+ struct device_attribute *attr,
+ char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%ld\n", br_timer_value(&br->topology_change_timer));
}
-static CLASS_DEVICE_ATTR(topology_change_timer, S_IRUGO, show_topology_change_timer, NULL);
+static DEVICE_ATTR(topology_change_timer, S_IRUGO, show_topology_change_timer,
+ NULL);
-static ssize_t show_gc_timer(struct class_device *cd, char *buf)
+static ssize_t show_gc_timer(struct device *d, struct device_attribute *attr,
+ char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%ld\n", br_timer_value(&br->gc_timer));
}
-static CLASS_DEVICE_ATTR(gc_timer, S_IRUGO, show_gc_timer, NULL);
+static DEVICE_ATTR(gc_timer, S_IRUGO, show_gc_timer, NULL);
-static ssize_t show_group_addr(struct class_device *cd, char *buf)
+static ssize_t show_group_addr(struct device *d,
+ struct device_attribute *attr, char *buf)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
return sprintf(buf, "%x:%x:%x:%x:%x:%x\n",
br->group_addr[0], br->group_addr[1],
br->group_addr[2], br->group_addr[3],
br->group_addr[4], br->group_addr[5]);
}
-static ssize_t store_group_addr(struct class_device *cd, const char *buf,
- size_t len)
+static ssize_t store_group_addr(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
{
- struct net_bridge *br = to_bridge(cd);
+ struct net_bridge *br = to_bridge(d);
unsigned new_addr[6];
int i;
return len;
}
-static CLASS_DEVICE_ATTR(group_addr, S_IRUGO | S_IWUSR,
- show_group_addr, store_group_addr);
+static DEVICE_ATTR(group_addr, S_IRUGO | S_IWUSR,
+ show_group_addr, store_group_addr);
static struct attribute *bridge_attrs[] = {
- &class_device_attr_forward_delay.attr,
- &class_device_attr_hello_time.attr,
- &class_device_attr_max_age.attr,
- &class_device_attr_ageing_time.attr,
- &class_device_attr_stp_state.attr,
- &class_device_attr_priority.attr,
- &class_device_attr_bridge_id.attr,
- &class_device_attr_root_id.attr,
- &class_device_attr_root_path_cost.attr,
- &class_device_attr_root_port.attr,
- &class_device_attr_topology_change.attr,
- &class_device_attr_topology_change_detected.attr,
- &class_device_attr_hello_timer.attr,
- &class_device_attr_tcn_timer.attr,
- &class_device_attr_topology_change_timer.attr,
- &class_device_attr_gc_timer.attr,
- &class_device_attr_group_addr.attr,
+ &dev_attr_forward_delay.attr,
+ &dev_attr_hello_time.attr,
+ &dev_attr_max_age.attr,
+ &dev_attr_ageing_time.attr,
+ &dev_attr_stp_state.attr,
+ &dev_attr_priority.attr,
+ &dev_attr_bridge_id.attr,
+ &dev_attr_root_id.attr,
+ &dev_attr_root_path_cost.attr,
+ &dev_attr_root_port.attr,
+ &dev_attr_topology_change.attr,
+ &dev_attr_topology_change_detected.attr,
+ &dev_attr_hello_timer.attr,
+ &dev_attr_tcn_timer.attr,
+ &dev_attr_topology_change_timer.attr,
+ &dev_attr_gc_timer.attr,
+ &dev_attr_group_addr.attr,
NULL
};
static ssize_t brforward_read(struct kobject *kobj, char *buf,
loff_t off, size_t count)
{
- struct class_device *cdev = to_class_dev(kobj);
- struct net_bridge *br = to_bridge(cdev);
+ struct device *dev = to_dev(kobj);
+ struct net_bridge *br = to_bridge(dev);
int n;
/* must read whole records */
*/
int br_sysfs_addbr(struct net_device *dev)
{
- struct kobject *brobj = &dev->class_dev.kobj;
+ struct kobject *brobj = &dev->dev.kobj;
struct net_bridge *br = netdev_priv(dev);
int err;
}
return 0;
out3:
- sysfs_remove_bin_file(&dev->class_dev.kobj, &bridge_forward);
+ sysfs_remove_bin_file(&dev->dev.kobj, &bridge_forward);
out2:
- sysfs_remove_group(&dev->class_dev.kobj, &bridge_group);
+ sysfs_remove_group(&dev->dev.kobj, &bridge_group);
out1:
return err;
void br_sysfs_delbr(struct net_device *dev)
{
- struct kobject *kobj = &dev->class_dev.kobj;
+ struct kobject *kobj = &dev->dev.kobj;
struct net_bridge *br = netdev_priv(dev);
kobject_unregister(&br->ifobj);
struct brport_attribute **a;
int err;
- err = sysfs_create_link(&p->kobj, &br->dev->class_dev.kobj,
+ err = sysfs_create_link(&p->kobj, &br->dev->dev.kobj,
SYSFS_BRIDGE_PORT_LINK);
if (err)
goto out2;
else
strlcpy(dev->name, newname, IFNAMSIZ);
- err = class_device_rename(&dev->class_dev, dev->name);
+ err = device_rename(&dev->dev, dev->name);
if (!err) {
hlist_del(&dev->name_hlist);
hlist_add_head(&dev->name_hlist, dev_name_hash(dev->name));
BUG_ON(dev->reg_state != NETREG_UNREGISTERED);
dev->reg_state = NETREG_RELEASED;
- /* will free via class release */
- class_device_put(&dev->class_dev);
+ /* will free via device release */
+ put_device(&dev->dev);
#else
kfree((char *)dev - dev->padded);
#endif
#include <linux/wireless.h>
#include <net/iw_handler.h>
-#define to_class_dev(obj) container_of(obj,struct class_device,kobj)
-#define to_net_dev(class) container_of(class, struct net_device, class_dev)
-
static const char fmt_hex[] = "%#x\n";
static const char fmt_long_hex[] = "%#lx\n";
static const char fmt_dec[] = "%d\n";
}
/* use same locking rules as GIF* ioctl's */
-static ssize_t netdev_show(const struct class_device *cd, char *buf,
+static ssize_t netdev_show(const struct device *dev,
+ struct device_attribute *attr, char *buf,
ssize_t (*format)(const struct net_device *, char *))
{
- struct net_device *net = to_net_dev(cd);
+ struct net_device *net = to_net_dev(dev);
ssize_t ret = -EINVAL;
read_lock(&dev_base_lock);
{ \
return sprintf(buf, format_string, net->field); \
} \
-static ssize_t show_##field(struct class_device *cd, char *buf) \
+static ssize_t show_##field(struct device *dev, \
+ struct device_attribute *attr, char *buf) \
{ \
- return netdev_show(cd, buf, format_##field); \
+ return netdev_show(dev, attr, buf, format_##field); \
}
/* use same locking and permission rules as SIF* ioctl's */
-static ssize_t netdev_store(struct class_device *dev,
+static ssize_t netdev_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t len,
int (*set)(struct net_device *, unsigned long))
{
return cp - buf;
}
-static ssize_t show_address(struct class_device *dev, char *buf)
+static ssize_t show_address(struct device *dev, struct device_attribute *attr,
+ char *buf)
{
struct net_device *net = to_net_dev(dev);
ssize_t ret = -EINVAL;
return ret;
}
-static ssize_t show_broadcast(struct class_device *dev, char *buf)
+static ssize_t show_broadcast(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct net_device *net = to_net_dev(dev);
if (dev_isalive(net))
return -EINVAL;
}
-static ssize_t show_carrier(struct class_device *dev, char *buf)
+static ssize_t show_carrier(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
if (netif_running(netdev)) {
return -EINVAL;
}
-static ssize_t show_dormant(struct class_device *dev, char *buf)
+static ssize_t show_dormant(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
struct net_device *netdev = to_net_dev(dev);
"up"
};
-static ssize_t show_operstate(struct class_device *dev, char *buf)
+static ssize_t show_operstate(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
const struct net_device *netdev = to_net_dev(dev);
unsigned char operstate;
return dev_set_mtu(net, (int) new_mtu);
}
-static ssize_t store_mtu(struct class_device *dev, const char *buf, size_t len)
+static ssize_t store_mtu(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return netdev_store(dev, buf, len, change_mtu);
+ return netdev_store(dev, attr, buf, len, change_mtu);
}
NETDEVICE_SHOW(flags, fmt_hex);
return dev_change_flags(net, (unsigned) new_flags);
}
-static ssize_t store_flags(struct class_device *dev, const char *buf, size_t len)
+static ssize_t store_flags(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return netdev_store(dev, buf, len, change_flags);
+ return netdev_store(dev, attr, buf, len, change_flags);
}
NETDEVICE_SHOW(tx_queue_len, fmt_ulong);
return 0;
}
-static ssize_t store_tx_queue_len(struct class_device *dev, const char *buf, size_t len)
+static ssize_t store_tx_queue_len(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return netdev_store(dev, buf, len, change_tx_queue_len);
+ return netdev_store(dev, attr, buf, len, change_tx_queue_len);
}
NETDEVICE_SHOW(weight, fmt_dec);
return 0;
}
-static ssize_t store_weight(struct class_device *dev, const char *buf, size_t len)
+static ssize_t store_weight(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t len)
{
- return netdev_store(dev, buf, len, change_weight);
+ return netdev_store(dev, attr, buf, len, change_weight);
}
-static struct class_device_attribute net_class_attributes[] = {
+static struct device_attribute net_class_attributes[] = {
__ATTR(addr_len, S_IRUGO, show_addr_len, NULL),
__ATTR(iflink, S_IRUGO, show_iflink, NULL),
__ATTR(ifindex, S_IRUGO, show_ifindex, NULL),
};
/* Show a given an attribute in the statistics group */
-static ssize_t netstat_show(const struct class_device *cd, char *buf,
+static ssize_t netstat_show(const struct device *d,
+ struct device_attribute *attr, char *buf,
unsigned long offset)
{
- struct net_device *dev = to_net_dev(cd);
+ struct net_device *dev = to_net_dev(d);
struct net_device_stats *stats;
ssize_t ret = -EINVAL;
/* generate a read-only statistics attribute */
#define NETSTAT_ENTRY(name) \
-static ssize_t show_##name(struct class_device *cd, char *buf) \
+static ssize_t show_##name(struct device *d, \
+ struct device_attribute *attr, char *buf) \
{ \
- return netstat_show(cd, buf, \
+ return netstat_show(d, attr, buf, \
offsetof(struct net_device_stats, name)); \
} \
-static CLASS_DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
+static DEVICE_ATTR(name, S_IRUGO, show_##name, NULL)
NETSTAT_ENTRY(rx_packets);
NETSTAT_ENTRY(tx_packets);
NETSTAT_ENTRY(tx_compressed);
static struct attribute *netstat_attrs[] = {
- &class_device_attr_rx_packets.attr,
- &class_device_attr_tx_packets.attr,
- &class_device_attr_rx_bytes.attr,
- &class_device_attr_tx_bytes.attr,
- &class_device_attr_rx_errors.attr,
- &class_device_attr_tx_errors.attr,
- &class_device_attr_rx_dropped.attr,
- &class_device_attr_tx_dropped.attr,
- &class_device_attr_multicast.attr,
- &class_device_attr_collisions.attr,
- &class_device_attr_rx_length_errors.attr,
- &class_device_attr_rx_over_errors.attr,
- &class_device_attr_rx_crc_errors.attr,
- &class_device_attr_rx_frame_errors.attr,
- &class_device_attr_rx_fifo_errors.attr,
- &class_device_attr_rx_missed_errors.attr,
- &class_device_attr_tx_aborted_errors.attr,
- &class_device_attr_tx_carrier_errors.attr,
- &class_device_attr_tx_fifo_errors.attr,
- &class_device_attr_tx_heartbeat_errors.attr,
- &class_device_attr_tx_window_errors.attr,
- &class_device_attr_rx_compressed.attr,
- &class_device_attr_tx_compressed.attr,
+ &dev_attr_rx_packets.attr,
+ &dev_attr_tx_packets.attr,
+ &dev_attr_rx_bytes.attr,
+ &dev_attr_tx_bytes.attr,
+ &dev_attr_rx_errors.attr,
+ &dev_attr_tx_errors.attr,
+ &dev_attr_rx_dropped.attr,
+ &dev_attr_tx_dropped.attr,
+ &dev_attr_multicast.attr,
+ &dev_attr_collisions.attr,
+ &dev_attr_rx_length_errors.attr,
+ &dev_attr_rx_over_errors.attr,
+ &dev_attr_rx_crc_errors.attr,
+ &dev_attr_rx_frame_errors.attr,
+ &dev_attr_rx_fifo_errors.attr,
+ &dev_attr_rx_missed_errors.attr,
+ &dev_attr_tx_aborted_errors.attr,
+ &dev_attr_tx_carrier_errors.attr,
+ &dev_attr_tx_fifo_errors.attr,
+ &dev_attr_tx_heartbeat_errors.attr,
+ &dev_attr_tx_window_errors.attr,
+ &dev_attr_rx_compressed.attr,
+ &dev_attr_tx_compressed.attr,
NULL
};
#ifdef WIRELESS_EXT
/* helper function that does all the locking etc for wireless stats */
-static ssize_t wireless_show(struct class_device *cd, char *buf,
+static ssize_t wireless_show(struct device *d, char *buf,
ssize_t (*format)(const struct iw_statistics *,
char *))
{
- struct net_device *dev = to_net_dev(cd);
+ struct net_device *dev = to_net_dev(d);
const struct iw_statistics *iw = NULL;
ssize_t ret = -EINVAL;
{ \
return sprintf(buf, format_string, iw->field); \
} \
-static ssize_t show_iw_##name(struct class_device *cd, char *buf) \
+static ssize_t show_iw_##name(struct device *d, \
+ struct device_attribute *attr, char *buf) \
{ \
- return wireless_show(cd, buf, format_iw_##name); \
+ return wireless_show(d, buf, format_iw_##name); \
} \
-static CLASS_DEVICE_ATTR(name, S_IRUGO, show_iw_##name, NULL)
+static DEVICE_ATTR(name, S_IRUGO, show_iw_##name, NULL)
WIRELESS_SHOW(status, status, fmt_hex);
WIRELESS_SHOW(link, qual.qual, fmt_dec);
WIRELESS_SHOW(beacon, miss.beacon, fmt_dec);
static struct attribute *wireless_attrs[] = {
- &class_device_attr_status.attr,
- &class_device_attr_link.attr,
- &class_device_attr_level.attr,
- &class_device_attr_noise.attr,
- &class_device_attr_nwid.attr,
- &class_device_attr_crypt.attr,
- &class_device_attr_fragment.attr,
- &class_device_attr_retries.attr,
- &class_device_attr_misc.attr,
- &class_device_attr_beacon.attr,
+ &dev_attr_status.attr,
+ &dev_attr_link.attr,
+ &dev_attr_level.attr,
+ &dev_attr_noise.attr,
+ &dev_attr_nwid.attr,
+ &dev_attr_crypt.attr,
+ &dev_attr_fragment.attr,
+ &dev_attr_retries.attr,
+ &dev_attr_misc.attr,
+ &dev_attr_beacon.attr,
NULL
};
#endif
#ifdef CONFIG_HOTPLUG
-static int netdev_uevent(struct class_device *cd, char **envp,
+static int netdev_uevent(struct device *d, char **envp,
int num_envp, char *buf, int size)
{
- struct net_device *dev = to_net_dev(cd);
+ struct net_device *dev = to_net_dev(d);
int i = 0;
int n;
/*
* netdev_release -- destroy and free a dead device.
- * Called when last reference to class_device kobject is gone.
+ * Called when last reference to device kobject is gone.
*/
-static void netdev_release(struct class_device *cd)
+static void netdev_release(struct device *d)
{
- struct net_device *dev
- = container_of(cd, struct net_device, class_dev);
+ struct net_device *dev = to_net_dev(d);
BUG_ON(dev->reg_state != NETREG_RELEASED);
static struct class net_class = {
.name = "net",
- .release = netdev_release,
- .class_dev_attrs = net_class_attributes,
+ .dev_release = netdev_release,
+ .dev_attrs = net_class_attributes,
#ifdef CONFIG_HOTPLUG
- .uevent = netdev_uevent,
+ .dev_uevent = netdev_uevent,
#endif
};
void netdev_unregister_sysfs(struct net_device * net)
{
- class_device_del(&(net->class_dev));
+ device_del(&(net->dev));
}
/* Create sysfs entries for network device. */
int netdev_register_sysfs(struct net_device *net)
{
- struct class_device *class_dev = &(net->class_dev);
+ struct device *dev = &(net->dev);
struct attribute_group **groups = net->sysfs_groups;
- class_device_initialize(class_dev);
- class_dev->class = &net_class;
- class_dev->class_data = net;
- class_dev->groups = groups;
+ device_initialize(dev);
+ dev->class = &net_class;
+ dev->platform_data = net;
+ dev->groups = groups;
BUILD_BUG_ON(BUS_ID_SIZE < IFNAMSIZ);
- strlcpy(class_dev->class_id, net->name, BUS_ID_SIZE);
+ strlcpy(dev->bus_id, net->name, BUS_ID_SIZE);
if (net->get_stats)
*groups++ = &netstat_group;
*groups++ = &wireless_group;
#endif
- return class_device_add(class_dev);
+ return device_add(dev);
}
int netdev_sysfs_init(void)
struct sk_buff *__netdev_alloc_skb(struct net_device *dev,
unsigned int length, gfp_t gfp_mask)
{
- int node = dev->class_dev.dev ? dev_to_node(dev->class_dev.dev) : -1;
+ int node = dev->dev.parent ? dev_to_node(dev->dev.parent) : -1;
struct sk_buff *skb;
skb = __alloc_skb(length + NET_SKB_PAD, gfp_mask, 0, node);
int err = -EINVAL;
spin_lock_irqsave(&mac->lock, flags);
+
+ if (unlikely(!mac->running)) {
+ err = -ENODEV;
+ goto out_unlock;
+ }
+
switch (mac->txrates.default_rate) {
case IEEE80211_CCK_RATE_1MB:
data->bitrate.value = 1000000;
####
# kbuild: Generic definitions
-# Convinient variables
+# Convenient constants
comma := ,
squote := '
empty :=
# gcc support functions
# See documentation in Documentation/kbuild/makefiles.txt
-# output directory for tests below
-TMPOUT := $(if $(KBUILD_EXTMOD),$(firstword $(KBUILD_EXTMOD))/)
+# checker-shell
+# Usage: option = $(call checker-shell,$(CC)...-o $$OUT,option-ok,otherwise)
+# Exit code chooses option. $$OUT is safe location for needless output.
+define checker-shell
+$(shell set -e; \
+ DIR=$(KBUILD_EXTMOD); \
+ cd $${DIR:-$(objtree)}; \
+ OUT=$$PWD/.$$$$.null; \
+ if $(1) >/dev/null 2>&1; \
+ then echo "$(2)"; \
+ else echo "$(3)"; \
+ fi; \
+ rm -f $$OUT)
+endef
# as-option
-# Usage: cflags-y += $(call as-option, -Wa$(comma)-isa=foo,)
-
-as-option = $(shell if $(CC) $(CFLAGS) $(1) -Wa,-Z -c -o /dev/null \
- -xassembler /dev/null > /dev/null 2>&1; then echo "$(1)"; \
- else echo "$(2)"; fi ;)
+# Usage: cflags-y += $(call as-option,-Wa$(comma)-isa=foo,)
+as-option = $(call checker-shell,\
+ $(CC) $(CFLAGS) $(1) -c -xassembler /dev/null -o $$OUT,$(1),$(2))
# as-instr
-# Usage: cflags-y += $(call as-instr, instr, option1, option2)
-
-as-instr = $(shell if echo -e "$(1)" | \
- $(CC) $(AFLAGS) -c -xassembler - \
- -o $(TMPOUT)astest$$$$.out > /dev/null 2>&1; \
- then rm $(TMPOUT)astest$$$$.out; echo "$(2)"; \
- else echo "$(3)"; fi)
+# Usage: cflags-y += $(call as-instr,instr,option1,option2)
+as-instr = $(call checker-shell,\
+ printf "$(1)" | $(CC) $(AFLAGS) -c -xassembler -o $$OUT -,$(2),$(3))
# cc-option
-# Usage: cflags-y += $(call cc-option, -march=winchip-c6, -march=i586)
-
-cc-option = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
+# Usage: cflags-y += $(call cc-option,-march=winchip-c6,-march=i586)
+cc-option = $(call checker-shell,\
+ $(CC) $(CFLAGS) $(if $(3),$(3),$(1)) -S -xc /dev/null -o $$OUT,$(1),$(2))
# cc-option-yn
-# Usage: flag := $(call cc-option-yn, -march=winchip-c6)
-cc-option-yn = $(shell if $(CC) $(CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
- > /dev/null 2>&1; then echo "y"; else echo "n"; fi;)
+# Usage: flag := $(call cc-option-yn,-march=winchip-c6)
+cc-option-yn = $(call cc-option,"y","n",$(1))
# cc-option-align
# Prefix align with either -falign or -malign
cc-option-align = $(subst -functions=0,,\
- $(call cc-option,-falign-functions=0,-malign-functions=0))
+ $(call cc-option,-falign-functions=0,-malign-functions=0))
# cc-version
-# Usage gcc-ver := $(call cc-version, $(CC))
+# Usage gcc-ver := $(call cc-version,$(CC))
cc-version = $(shell $(CONFIG_SHELL) $(srctree)/scripts/gcc-version.sh $(CC))
# cc-ifversion
# Usage: EXTRA_CFLAGS += $(call cc-ifversion, -lt, 0402, -O1)
-cc-ifversion = $(shell if [ $(call cc-version, $(CC)) $(1) $(2) ]; then \
- echo $(3); fi;)
+cc-ifversion = $(shell [ $(call cc-version, $(CC)) $(1) $(2) ] && echo $(3))
# ld-option
# Usage: ldflags += $(call ld-option, -Wl$(comma)--hash-style=both)
-ld-option = $(shell if $(CC) $(1) -nostdlib -xc /dev/null \
- -o $(TMPOUT)ldtest$$$$.out > /dev/null 2>&1; \
- then rm $(TMPOUT)ldtest$$$$.out; echo "$(1)"; \
- else echo "$(2)"; fi)
+ld-option = $(call checker-shell,\
+ $(CC) $(1) -nostdlib -xc /dev/null -o $$OUT,$(1),$(2))
+
+######
-###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
-# Prefix -I with $(srctree) if it is not an absolute path
-addtree = $(if $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)
+# Prefix -I with $(srctree) if it is not an absolute path,
+# add original to the end
+addtree = $(if \
+ $(filter-out -I/%,$(1)),$(patsubst -I%,-I$(srctree)/%,$(1))) $(1)
+
# Find all -I options and call addtree
-flags = $(foreach o,$($(1)),$(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
+flags = $(foreach o,$($(1)),\
+ $(if $(filter -I%,$(o)),$(call addtree,$(o)),$(o)))
+
+# echo command.
+# Short version is used, if $(quiet) equals `quiet_', otherwise full one.
+echo-cmd = $(if $($(quiet)cmd_$(1)),\
+ echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
-# If quiet is set, only print short version of command
+# printing commands
cmd = @$(echo-cmd) $(cmd_$(1))
-# Add $(obj)/ for paths that is not absolute
+# Add $(obj)/ for paths that are not absolute
objectify = $(foreach o,$(1),$(if $(filter /%,$(o)),$(o),$(obj)/$(o)))
###
-# if_changed - execute command if any prerequisite is newer than
+# if_changed - execute command if any prerequisite is newer than
# target, or command line has changed
# if_changed_dep - as if_changed, but uses fixdep to reveal dependencies
# including used config symbols
# See Documentation/kbuild/makefiles.txt for more info
ifneq ($(KBUILD_NOCMDDEP),1)
-# Check if both arguments has same arguments. Result in empty string if equal
+# Check if both arguments has same arguments. Result is empty string, if equal.
# User may override this check using make KBUILD_NOCMDDEP=1
arg-check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \
$(filter-out $(cmd_$@), $(cmd_$(1))) )
endif
-# echo command. Short version is $(quiet) equals quiet, otherwise full command
-echo-cmd = $(if $($(quiet)cmd_$(1)), \
- echo ' $(call escsq,$($(quiet)cmd_$(1)))$(echo-why)';)
-
# >'< substitution is for echo to work,
# >$< substitution to preserve $ when reloading .cmd file
# note: when using inline perl scripts [perl -e '...$$t=1;...']
# PHONY targets skipped in both cases.
any-prereq = $(filter-out $(PHONY),$?) $(filter-out $(PHONY) $(wildcard $^),$^)
-# Execute command if command has changed or prerequisitei(s) are updated
+# Execute command if command has changed or prerequisite(s) are updated.
#
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
-# execute the command and also postprocess generated .d dependencies
-# file
+# Execute the command and also postprocess generated .d dependencies file.
+#
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
rm -f $(depfile); \
mv -f $(dot-target).tmp $(dot-target).cmd)
+# Will check if $(cmd_foo) changed, or any of the prerequisites changed,
+# and if so will execute $(rule_foo).
# Usage: $(call if_changed_rule,foo)
-# will check if $(cmd_foo) changed, or any of the prequisites changed,
-# and if so will execute $(rule_foo)
+#
if_changed_rule = $(if $(strip $(any-prereq) $(arg-check) ), \
@set -e; \
$(rule_$(1)))
#!/bin/bash
# Copyright (C) Martin Schlemmer <azarah@nosferatu.za.org>
-# Copyright (c) 2006 Sam Ravnborg <sam@ravnborg.org>
+# Copyright (C) 2006 Sam Ravnborg <sam@ravnborg.org>
#
# Released under the terms of the GNU GPL
#
Usage:
$0 [-o <file>] [-u <uid>] [-g <gid>] {-d | <cpio_source>} ...
-o <file> Create gzipped initramfs file named <file> using
- gen_init_cpio and gzip
+ gen_init_cpio and gzip
-u <uid> User ID to map to user ID 0 (root).
- <uid> is only meaningful if <cpio_source>
- is a directory.
+ <uid> is only meaningful if <cpio_source>
+ is a directory.
-g <gid> Group ID to map to group ID 0 (root).
- <gid> is only meaningful if <cpio_source>
- is a directory.
+ <gid> is only meaningful if <cpio_source>
+ is a directory.
<cpio_source> File list or directory for cpio archive.
- If <cpio_source> is a .cpio file it will be used
+ If <cpio_source> is a .cpio file it will be used
as direct input to initramfs.
-d Output the default cpio list.
EOF
}
+# awk style field access
+# $1 - field number; rest is argument string
+field() {
+ shift $1 ; echo $1
+}
+
list_default_initramfs() {
# echo usr/kinit/kinit
:
str="${ftype} ${name} ${location} ${str}"
;;
"nod")
- local dev_type=
- local maj=$(LC_ALL=C ls -l "${location}" | \
- gawk '{sub(/,/, "", $5); print $5}')
- local min=$(LC_ALL=C ls -l "${location}" | \
- gawk '{print $6}')
-
- if [ -b "${location}" ]; then
- dev_type="b"
- else
- dev_type="c"
- fi
- str="${ftype} ${name} ${str} ${dev_type} ${maj} ${min}"
+ local dev=`LC_ALL=C ls -l "${location}"`
+ local maj=`field 5 ${dev}`
+ local min=`field 6 ${dev}`
+ maj=${maj%,}
+
+ [ -b "${location}" ] && dev="b" || dev="c"
+
+ str="${ftype} ${name} ${str} ${dev} ${maj} ${min}"
;;
"slink")
- local target=$(LC_ALL=C ls -l "${location}" | \
- gawk '{print $11}')
+ local target=`field 11 $(LC_ALL=C ls -l "${location}")`
str="${ftype} ${name} ${target} ${str}"
;;
*)
-#!/bin/bash
+#!/bin/sh
# A script to dump mixed source code & assembly
# with correct relocations from System.map
-# Requires the following lines in Rules.make.
-# Author(s): DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
-# William Stearns <wstearns@pobox.com>
+# Requires the following lines in makefile:
#%.lst: %.c
# $(CC) $(CFLAGS) $(EXTRA_CFLAGS) $(CFLAGS_$@) -g -c -o $*.o $<
-# $(TOPDIR)/scripts/makelst $*.o $(TOPDIR)/System.map $(OBJDUMP)
+# $(srctree)/scripts/makelst $*.o $(objtree)/System.map $(OBJDUMP)
#
-# Copyright (C) 2000 IBM Corporation
-# Author(s): DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+# Copyright (C) 2000 IBM Corporation
+# Author(s): DJ Barrow (djbarrow@de.ibm.com,barrow_dj@yahoo.com)
+# William Stearns <wstearns@pobox.com>
#
-t1=`$3 --syms $1 | grep .text | grep " F " | head -n 1`
+# awk style field access
+field() {
+ shift $1 ; echo $1
+}
+
+t1=`$3 --syms $1 | grep .text | grep -m1 " F "`
if [ -n "$t1" ]; then
- t2=`echo $t1 | gawk '{ print $6 }'`
+ t2=`field 6 $t1`
if [ ! -r $2 ]; then
echo "No System.map" >&2
- t7=0
else
t3=`grep $t2 $2`
- t4=`echo $t3 | gawk '{ print $1 }'`
- t5=`echo $t1 | gawk '{ print $1 }'`
- t6=`echo $t4 - $t5 | tr a-f A-F`
- t7=`( echo ibase=16 ; echo $t6 ) | bc`
+ t4=`field 1 $t3`
+ t5=`field 1 $t1`
+ t6=`printf "%lu" $((0x$t4 - 0x$t5))`
fi
-else
- t7=0
fi
-$3 -r --source --adjust-vma=$t7 $1
+$3 -r --source --adjust-vma=${t6:-0} $1
spin_lock(&key_serial_lock);
+attempt_insertion:
parent = NULL;
p = &key_serial_tree.rb_node;
else
goto serial_exists;
}
- goto insert_here;
+
+ /* we've found a suitable hole - arrange for this key to occupy it */
+ rb_link_node(&key->serial_node, parent, p);
+ rb_insert_color(&key->serial_node, &key_serial_tree);
+
+ spin_unlock(&key_serial_lock);
+ return;
/* we found a key with the proposed serial number - walk the tree from
* that point looking for the next unused serial number */
serial_exists:
for (;;) {
key->serial++;
- if (key->serial < 2)
- key->serial = 2;
-
- if (!rb_parent(parent))
- p = &key_serial_tree.rb_node;
- else if (rb_parent(parent)->rb_left == parent)
- p = &(rb_parent(parent)->rb_left);
- else
- p = &(rb_parent(parent)->rb_right);
+ if (key->serial < 3) {
+ key->serial = 3;
+ goto attempt_insertion;
+ }
parent = rb_next(parent);
if (!parent)
- break;
+ goto attempt_insertion;
xkey = rb_entry(parent, struct key, serial_node);
if (key->serial < xkey->serial)
- goto insert_here;
+ goto attempt_insertion;
}
- /* we've found a suitable hole - arrange for this key to occupy it */
-insert_here:
- rb_link_node(&key->serial_node, parent, p);
- rb_insert_color(&key->serial_node, &key_serial_tree);
-
- spin_unlock(&key_serial_lock);
-
} /* end key_alloc_serial() */
/*****************************************************************************/
projects / cascardo / linux.git / commitdiff