V4L/DVB: drivers/media/dvb/dvb-usb/dib0700: CodingStyle fixes

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Douglas Schilling Landgraf <dougsland@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c
index d2dabac..7deade7 100644 (file)
--- a/drivers/media/dvb/dvb-usb/dib0700_core.c
+++ b/drivers/media/dvb/dvb-usb/dib0700_core.c
@@ -53,7 +53,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen)
        int status;
 
        deb_data(">>> ");
-       debug_dump(tx,txlen,deb_data);
+       debug_dump(tx, txlen, deb_data);
 
        status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0),
                tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen,
@@ -98,7 +98,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
                deb_info("ep 0 read error (status = %d)\n",status);
 
        deb_data("<<< ");
-       debug_dump(rx,rxlen,deb_data);
+       debug_dump(rx, rxlen, deb_data);
 
        return status; /* length in case of success */
 }
@@ -106,28 +106,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen
 int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val)
 {
        u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) };
-       return dib0700_ctrl_wr(d,buf,3);
+       return dib0700_ctrl_wr(d, buf, sizeof(buf));
 }
 
 static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets)
 {
-    struct dib0700_state *st = d->priv;
-    u8 b[3];
-    int ret;
-
-    if (st->fw_version >= 0x10201) {
-       b[0] = REQUEST_SET_USB_XFER_LEN;
-       b[1] = (nb_ts_packets >> 8)&0xff;
-       b[2] = nb_ts_packets & 0xff;
-
-       deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
-
-       ret = dib0700_ctrl_wr(d, b, 3);
-    } else {
-       deb_info("this firmware does not allow to change the USB xfer len\n");
-       ret = -EIO;
-    }
-    return ret;
+       struct dib0700_state *st = d->priv;
+       u8 b[3];
+       int ret;
+
+       if (st->fw_version >= 0x10201) {
+               b[0] = REQUEST_SET_USB_XFER_LEN;
+               b[1] = (nb_ts_packets >> 8) & 0xff;
+               b[2] = nb_ts_packets & 0xff;
+
+               deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets);
+
+               ret = dib0700_ctrl_wr(d, b, sizeof(b));
+       } else {
+               deb_info("this firmware does not allow to change the USB xfer len\n");
+               ret = -EIO;
+       }
+
+       return ret;
 }
 
 /*
@@ -178,7 +179,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
                        value = ((en_start << 7) | (en_stop << 6) |
                                 (msg[i].len & 0x3F)) << 8 | i2c_dest;
                        /* I2C ctrl + FE bus; */
-                       index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+                       index = ((gen_mode << 6) & 0xC0) |
+                               ((bus_mode << 4) & 0x30);
 
                        result = usb_control_msg(d->udev,
                                                 usb_rcvctrlpipe(d->udev, 0),
@@ -198,11 +200,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg,
                } else {
                        /* Write request */
                        buf[0] = REQUEST_NEW_I2C_WRITE;
-                       buf[1] = (msg[i].addr << 1);
+                       buf[1] = msg[i].addr << 1;
                        buf[2] = (en_start << 7) | (en_stop << 6) |
                                (msg[i].len & 0x3F);
                        /* I2C ctrl + FE bus; */
-                       buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30);
+                       buf[3] = ((gen_mode << 6) & 0xC0) |
+                                ((bus_mode << 4) & 0x30);
                        /* The Actual i2c payload */
                        memcpy(&buf[4], msg[i].buf, msg[i].len);
 
@@ -240,7 +243,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap,
 
        for (i = 0; i < num; i++) {
                /* fill in the address */
-               buf[1] = (msg[i].addr << 1);
+               buf[1] = msg[i].addr << 1;
                /* fill the buffer */
                memcpy(&buf[2], msg[i].buf, msg[i].len);
 
@@ -368,7 +371,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
        u8 buf[260];
 
        while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) {
-               deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk);
+               deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",
+                               hx.addr, hx.len, hx.chk);
 
                buf[0] = hx.len;
                buf[1] = (hx.addr >> 8) & 0xff;
@@ -408,16 +412,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw
                                  REQUEST_GET_VERSION,
                                  USB_TYPE_VENDOR | USB_DIR_IN, 0, 0,
                                  b, sizeof(b), USB_CTRL_GET_TIMEOUT);
-       fw_version = (b[8] << 24)  | (b[9] << 16)  | (b[10] << 8) | b[11];
+       fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11];
 
        /* set the buffer size - DVB-USB is allocating URB buffers
         * only after the firwmare download was successful */
        for (i = 0; i < dib0700_device_count; i++) {
                for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters;
                                adap_num++) {
-                       if (fw_version >= 0x10201)
+                       if (fw_version >= 0x10201) {
                                dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size;
-                       else {
+                       } else {
                                /* for fw version older than 1.20.1,
                                 * the buffersize has to be n times 512 */
                                dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512;
@@ -453,7 +457,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
        if (st->disable_streaming_master_mode == 1)
                b[2] = 0x00;
        else
-               b[2] = (0x01 << 4); /* Master mode */
+               b[2] = 0x01 << 4; /* Master mode */
 
        b[3] = 0x00;
 
@@ -466,7 +470,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
 
        b[2] |= st->channel_state;
 
-       deb_info("data for streaming: %x %x\n",b[1],b[2]);
+       deb_info("data for streaming: %x %x\n", b[1], b[2]);
 
        return dib0700_ctrl_wr(adap->dev, b, 4);
 }
@@ -631,7 +635,7 @@ resubmit:
 int dib0700_rc_setup(struct dvb_usb_device *d)
 {
        struct dib0700_state *st = d->priv;
-       u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0};
+       u8 rc_setup[3] = { REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0 };
        struct urb *purb;
        int ret;
        int i;