ARM: sun5i: dt: Use the A10s gates in the DTSI

The A10s has only a subset of the A10 gates. Now that the clock driver
has support for this gates set, switch to it in the DTSI.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Tested-by: Emilio López <emilio@elopez.com.ar>

diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index ee0ff9b..3b4a057 100644 (file)
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -95,20 +95,16 @@
 
                ahb_gates: ahb_gates@01c20060 {
                        #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-ahb-gates-clk";
+                       compatible = "allwinner,sun5i-a10s-ahb-gates-clk";
                        reg = <0x01c20060 0x8>;
                        clocks = <&ahb>;
-                       clock-output-names = "ahb_usb0", "ahb_ehci0",
-                               "ahb_ohci0", "ahb_ehci1", "ahb_ohci1", "ahb_ss",
-                               "ahb_dma", "ahb_bist", "ahb_mmc0", "ahb_mmc1",
-                               "ahb_mmc2", "ahb_mmc3", "ahb_ms", "ahb_nand",
-                               "ahb_sdram", "ahb_ace", "ahb_emac", "ahb_ts",
-                               "ahb_spi0", "ahb_spi1", "ahb_spi2", "ahb_spi3",
-                               "ahb_pata", "ahb_sata", "ahb_gps", "ahb_ve",
-                               "ahb_tvd", "ahb_tve0", "ahb_tve1", "ahb_lcd0",
-                               "ahb_lcd1", "ahb_csi0", "ahb_csi1", "ahb_hdmi",
-                               "ahb_de_be0", "ahb_de_be1", "ahb_de_fe0",
-                               "ahb_de_fe1", "ahb_mp", "ahb_mali400";
+                       clock-output-names = "ahb_usbotg", "ahb_ehci", "ahb_ohci",
+                               "ahb_ss", "ahb_dma", "ahb_bist", "ahb_mmc0",
+                               "ahb_mmc1", "ahb_mmc2", "ahb_nand", "ahb_sdram",
+                               "ahb_emac", "ahb_ts", "ahb_spi0", "ahb_spi1",
+                               "ahb_spi2", "ahb_gps", "ahb_stimer", "ahb_ve",
+                               "ahb_tve", "ahb_lcd", "ahb_csi", "ahb_hdmi",
+                               "ahb_de_be", "ahb_de_fe", "ahb_iep", "ahb_mali400";
                };
 
                apb0: apb0@01c20054 {
@@ -120,12 +116,11 @@
 
                apb0_gates: apb0_gates@01c20068 {
                        #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-apb0-gates-clk";
+                       compatible = "allwinner,sun5i-a10s-apb0-gates-clk";
                        reg = <0x01c20068 0x4>;
                        clocks = <&apb0>;
-                       clock-output-names = "apb0_codec", "apb0_spdif",
-                               "apb0_ac97", "apb0_iis", "apb0_pio", "apb0_ir0",
-                               "apb0_ir1", "apb0_keypad";
+                       clock-output-names = "apb0_codec", "apb0_iis", "apb0_pio",
+                               "apb0_ir", "apb0_keypad";
                };
 
                /* dummy is pll62 */
@@ -145,15 +140,12 @@
 
                apb1_gates: apb1_gates@01c2006c {
                        #clock-cells = <1>;
-                       compatible = "allwinner,sun4i-apb1-gates-clk";
+                       compatible = "allwinner,sun5i-a10s-apb1-gates-clk";
                        reg = <0x01c2006c 0x4>;
                        clocks = <&apb1>;
                        clock-output-names = "apb1_i2c0", "apb1_i2c1",
-                               "apb1_i2c2", "apb1_can", "apb1_scr",
-                               "apb1_ps20", "apb1_ps21", "apb1_uart0",
-                               "apb1_uart1", "apb1_uart2", "apb1_uart3",
-                               "apb1_uart4", "apb1_uart5", "apb1_uart6",
-                               "apb1_uart7";
+                               "apb1_i2c2", "apb1_uart0", "apb1_uart1",
+                               "apb1_uart2", "apb1_uart3";
                };
        };