staging: cxt1e1: Fix no spaces at the start of a line in musycc.c
authorDaeseok Youn <daeseok.youn@gmail.com>
Fri, 9 May 2014 10:02:20 +0000 (19:02 +0900)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Fri, 23 May 2014 11:38:42 +0000 (20:38 +0900)
clean up checkpatch.pl warning:
 WARNING: please no spaces at the start of a line in

Signed-off-by: Daeseok Youn <daeseok.youn@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/staging/cxt1e1/musycc.c

index 872cdae..2ddf889 100644 (file)
@@ -68,65 +68,65 @@ void        musycc_update_timeslots(mpi_t *);
 static int
 musycc_dump_rxbuffer_ring(mch_t *ch, int lockit)
 {
-    struct mdesc *m;
-    unsigned long flags = 0;
+       struct mdesc *m;
+       unsigned long flags = 0;
 
-    u_int32_t status;
-    int         n;
+       u_int32_t status;
+       int         n;
 
-    if (lockit)
-       spin_lock_irqsave(&ch->ch_rxlock, flags);
-    if (ch->rxd_num == 0)
-       pr_info("  ZERO receive buffers allocated for this channel.");
-    else {
-       FLUSH_MEM_READ();
-       m = &ch->mdr[ch->rxix_irq_srv];
-       for (n = ch->rxd_num; n; n--) {
-           status = le32_to_cpu(m->status);
-           {
-               pr_info("%c  %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
-                       (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ',
-                       (unsigned long) m, n,
-                       status,
-                       m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-',
-                       status & POLL_DISABLED ? 'P' : '-',
-                       status & EOBIRQ_ENABLE ? 'b' : '-',
-                       status & EOMIRQ_ENABLE ? 'm' : '-',
-                       status & LENGTH_MASK,
-                       le32_to_cpu(m->data), le32_to_cpu(m->next));
+       if (lockit)
+               spin_lock_irqsave(&ch->ch_rxlock, flags);
+       if (ch->rxd_num == 0)
+               pr_info("  ZERO receive buffers allocated for this channel.");
+       else {
+               FLUSH_MEM_READ();
+               m = &ch->mdr[ch->rxix_irq_srv];
+               for (n = ch->rxd_num; n; n--) {
+                       status = le32_to_cpu(m->status);
+                       {
+                               pr_info("%c  %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
+                                       (m == &ch->mdr[ch->rxix_irq_srv]) ? 'F' : ' ',
+                                       (unsigned long) m, n,
+                                       status,
+                                       m->data ? (status & HOST_RX_OWNED ? 'H' : 'M') : '-',
+                                       status & POLL_DISABLED ? 'P' : '-',
+                                       status & EOBIRQ_ENABLE ? 'b' : '-',
+                                       status & EOMIRQ_ENABLE ? 'm' : '-',
+                                       status & LENGTH_MASK,
+                                       le32_to_cpu(m->data), le32_to_cpu(m->next));
 #ifdef RLD_DUMP_BUFDATA
-               {
-                   u_int32_t  *dp;
-                   int         len = status & LENGTH_MASK;
+                               {
+                                       u_int32_t  *dp;
+                                       int         len = status & LENGTH_MASK;
 
 #if 1
-                   if (m->data && (status & HOST_RX_OWNED))
+                                       if (m->data && (status & HOST_RX_OWNED))
 #else
-                   if (m->data)    /* always dump regardless of valid RX
-                                    * data */
+                                       if (m->data)    /* always dump regardless of valid RX
+                                                        * data */
 #endif
-                   {
-                       dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
-                       if (len >= 0x10)
-                           pr_info("    %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
-                                   *dp, *(dp + 1), *(dp + 2), *(dp + 3));
-                       else if (len >= 0x08)
-                           pr_info("    %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
-                                   *dp, *(dp + 1));
-                       else
-                           pr_info("    %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
-                   }
-               }
+                                       {
+                                               dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
+                                               if (len >= 0x10)
+                                                       pr_info("    %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
+                                                               *dp, *(dp + 1), *(dp + 2), *(dp + 3));
+                                               else if (len >= 0x08)
+                                                       pr_info("    %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
+                                                               *dp, *(dp + 1));
+                                               else
+                                                       pr_info("    %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
+                                       }
+                               }
 #endif
-           }
-           m = m->snext;
-       }
-    }                               /* -for- */
-    pr_info("\n");
+                       }
+                       m = m->snext;
+               }
+       }                               /* -for- */
+       pr_info("\n");
 
-    if (lockit)
-       spin_unlock_irqrestore(&ch->ch_rxlock, flags);
-    return 0;
+       if (lockit)
+               spin_unlock_irqrestore(&ch->ch_rxlock, flags);
+       return 0;
 }
 #endif
 
@@ -134,59 +134,59 @@ musycc_dump_rxbuffer_ring(mch_t *ch, int lockit)
 static int
 musycc_dump_txbuffer_ring(mch_t *ch, int lockit)
 {
-    struct mdesc *m;
-    unsigned long flags = 0;
-    u_int32_t   status;
-    int         n;
-
-    if (lockit)
-       spin_lock_irqsave(&ch->ch_txlock, flags);
-    if (ch->txd_num == 0)
-       pr_info("  ZERO transmit buffers allocated for this channel.");
-    else {
-       FLUSH_MEM_READ();
-       m = ch->txd_irq_srv;
-       for (n = ch->txd_num; n; n--) {
-           status = le32_to_cpu(m->status);
-           {
-               pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
-                       (m == ch->txd_usr_add) ? 'F' : ' ',
-                       (m == ch->txd_irq_srv) ? 'L' : ' ',
-                       (unsigned long) m, n,
-                       status,
-                    m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-',
-                       status & POLL_DISABLED ? 'P' : '-',
-                       status & EOBIRQ_ENABLE ? 'b' : '-',
-                       status & EOMIRQ_ENABLE ? 'm' : '-',
-                       status & LENGTH_MASK,
-                       le32_to_cpu(m->data), le32_to_cpu(m->next));
+       struct mdesc *m;
+       unsigned long flags = 0;
+       u_int32_t   status;
+       int         n;
+
+       if (lockit)
+               spin_lock_irqsave(&ch->ch_txlock, flags);
+       if (ch->txd_num == 0)
+               pr_info("  ZERO transmit buffers allocated for this channel.");
+       else {
+               FLUSH_MEM_READ();
+               m = ch->txd_irq_srv;
+               for (n = ch->txd_num; n; n--) {
+                       status = le32_to_cpu(m->status);
+                       {
+                               pr_info("%c%c %08lx[%2d]: sts %08x (%c%c%c%c:%d.) Data [%08x] Next [%08x]\n",
+                                       (m == ch->txd_usr_add) ? 'F' : ' ',
+                                       (m == ch->txd_irq_srv) ? 'L' : ' ',
+                                       (unsigned long) m, n,
+                                       status,
+                                       m->data ? (status & MUSYCC_TX_OWNED ? 'M' : 'H') : '-',
+                                       status & POLL_DISABLED ? 'P' : '-',
+                                       status & EOBIRQ_ENABLE ? 'b' : '-',
+                                       status & EOMIRQ_ENABLE ? 'm' : '-',
+                                       status & LENGTH_MASK,
+                                       le32_to_cpu(m->data), le32_to_cpu(m->next));
 #ifdef RLD_DUMP_BUFDATA
-               {
-                   u_int32_t  *dp;
-                   int         len = status & LENGTH_MASK;
-
-                   if (m->data) {
-                       dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
-                       if (len >= 0x10)
-                           pr_info("    %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
-                                   *dp, *(dp + 1), *(dp + 2), *(dp + 3));
-                       else if (len >= 0x08)
-                           pr_info("    %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
-                                   *dp, *(dp + 1));
-                       else
-                           pr_info("    %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
-                   }
-               }
+                               {
+                                       u_int32_t  *dp;
+                                       int         len = status & LENGTH_MASK;
+
+                                       if (m->data) {
+                                               dp = (u_int32_t *) OS_phystov((void *) (le32_to_cpu(m->data)));
+                                               if (len >= 0x10)
+                                                       pr_info("    %x[%x]: %08X %08X %08X %08x\n", (u_int32_t) dp, len,
+                                                               *dp, *(dp + 1), *(dp + 2), *(dp + 3));
+                                               else if (len >= 0x08)
+                                                       pr_info("    %x[%x]: %08X %08X\n", (u_int32_t) dp, len,
+                                                               *dp, *(dp + 1));
+                                               else
+                                                       pr_info("    %x[%x]: %08X\n", (u_int32_t) dp, len, *dp);
+                                       }
+                               }
 #endif
-           }
-           m = m->snext;
-       }
-    }                               /* -for- */
-    pr_info("\n");
+                       }
+                       m = m->snext;
+               }
+       }                               /* -for- */
+       pr_info("\n");
 
-    if (lockit)
-       spin_unlock_irqrestore(&ch->ch_txlock, flags);
-    return 0;
+       if (lockit)
+               spin_unlock_irqrestore(&ch->ch_txlock, flags);
+       return 0;
 }
 #endif
 
@@ -199,55 +199,55 @@ musycc_dump_txbuffer_ring(mch_t *ch, int lockit)
 status_t
 musycc_dump_ring(ci_t *ci, unsigned int chan)
 {
-    mch_t      *ch;
-
-    if (chan >= MAX_CHANS_USED)
-       return SBE_DRVR_FAIL;       /* E2BIG */
-    {
-       int         bh;
-
-       bh = atomic_read(&ci->bh_pending);
-       pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n",
-               bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt,
-               ci->intlog.drvr_intr_thcount,
-               ci->intlog.drvr_intr_bhcount,
-               ci->wdcount, ci->wd_notify);
-       max_bh = 0;                 /* reset counter */
-       max_intcnt = 0;             /* reset counter */
-    }
-
-    ch = sd_find_chan(dummy, chan);
-    if (!ch) {
-       pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
-       return ENOENT;
-    }
-    pr_info(">> CI %p CHANNEL %3d @ %p: state %x status/p %x/%x\n", ci, chan, ch, ch->state,
-           ch->status, ch->p.status);
-    pr_info("--------------------------------\nTX Buffer Ring - Channel %d, txd_num %d. (bd/ch pend %d %d), TXD required %d, txpkt %lu\n",
-           chan, ch->txd_num,
-           (u_int32_t) atomic_read(&ci->tx_pending), (u_int32_t) atomic_read(&ch->tx_pending), ch->txd_required, ch->s.tx_packets);
-    pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
-           ch->user, ch->txd_irq_srv, ch->txd_usr_add,
-           sd_queue_stopped(ch->user),
-           ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
-    musycc_dump_txbuffer_ring(ch, 1);
-    pr_info("RX Buffer Ring - Channel %d, rxd_num %d. IRQ_SRV[%d] 0x%p, start_rx %x rxpkt %lu\n",
-           chan, ch->rxd_num, ch->rxix_irq_srv,
-           &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets);
-    musycc_dump_rxbuffer_ring(ch, 1);
-
-    return SBE_DRVR_SUCCESS;
+       mch_t      *ch;
+
+       if (chan >= MAX_CHANS_USED)
+               return SBE_DRVR_FAIL;       /* E2BIG */
+       {
+               int         bh;
+
+               bh = atomic_read(&ci->bh_pending);
+               pr_info(">> bh_pend %d [%d] ihead %d itail %d [%d] th_cnt %d bh_cnt %d wdcnt %d note %d\n",
+                       bh, max_bh, ci->iqp_headx, ci->iqp_tailx, max_intcnt,
+                       ci->intlog.drvr_intr_thcount,
+                       ci->intlog.drvr_intr_bhcount,
+                       ci->wdcount, ci->wd_notify);
+               max_bh = 0;                 /* reset counter */
+               max_intcnt = 0;             /* reset counter */
+       }
+
+       ch = sd_find_chan(dummy, chan);
+       if (!ch) {
+               pr_info(">> musycc_dump_ring: channel %d not up.\n", chan);
+               return ENOENT;
+       }
+       pr_info(">> CI %p CHANNEL %3d @ %p: state %x status/p %x/%x\n", ci, chan, ch, ch->state,
+               ch->status, ch->p.status);
+       pr_info("--------------------------------\nTX Buffer Ring - Channel %d, txd_num %d. (bd/ch pend %d %d), TXD required %d, txpkt %lu\n",
+               chan, ch->txd_num,
+               (u_int32_t) atomic_read(&ci->tx_pending), (u_int32_t) atomic_read(&ch->tx_pending), ch->txd_required, ch->s.tx_packets);
+       pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
+               ch->user, ch->txd_irq_srv, ch->txd_usr_add,
+               sd_queue_stopped(ch->user),
+               ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+       musycc_dump_txbuffer_ring(ch, 1);
+       pr_info("RX Buffer Ring - Channel %d, rxd_num %d. IRQ_SRV[%d] 0x%p, start_rx %x rxpkt %lu\n",
+               chan, ch->rxd_num, ch->rxix_irq_srv,
+               &ch->mdr[ch->rxix_irq_srv], ch->ch_start_rx, ch->s.rx_packets);
+       musycc_dump_rxbuffer_ring(ch, 1);
+
+       return SBE_DRVR_SUCCESS;
 }
 
 
 status_t
 musycc_dump_rings(ci_t *ci, unsigned int start_chan)
 {
-    unsigned int chan;
+       unsigned int chan;
 
-    for (chan = start_chan; chan < (start_chan + 5); chan++)
-       musycc_dump_ring(ci, chan);
-    return SBE_DRVR_SUCCESS;
+       for (chan = start_chan; chan < (start_chan + 5); chan++)
+               musycc_dump_ring(ci, chan);
+       return SBE_DRVR_SUCCESS;
 }
 
 
@@ -259,22 +259,22 @@ musycc_dump_rings(ci_t *ci, unsigned int start_chan)
 void
 musycc_init_mdt(mpi_t *pi)
 {
-    u_int32_t  *addr, cfg;
-    int         i;
-
-    /*
-     * This Idle Code insertion takes effect prior to channel's first
-     * transmitted  message.  After that, each message contains its own Idle
-     * Code information which is to be issued after the message is
-     * transmitted (Ref.MUSYCC 5.2.2.3: MCENBL bit in Group Configuration
-     * Descriptor).
-     */
-
-    addr = (u_int32_t *) ((u_long) pi->reg + MUSYCC_MDT_BASE03_ADDR);
-    cfg = CFG_CH_FLAG_7E << IDLE_CODE;
-
-    for (i = 0; i < 32; addr++, i++)
-       pci_write_32(addr, cfg);
+       u_int32_t  *addr, cfg;
+       int         i;
+
+       /*
+        * This Idle Code insertion takes effect prior to channel's first
+        * transmitted  message.  After that, each message contains its own Idle
+        * Code information which is to be issued after the message is
+        * transmitted (Ref.MUSYCC 5.2.2.3: MCENBL bit in Group Configuration
+        * Descriptor).
+        */
+
+       addr = (u_int32_t *) ((u_long) pi->reg + MUSYCC_MDT_BASE03_ADDR);
+       cfg = CFG_CH_FLAG_7E << IDLE_CODE;
+
+       for (i = 0; i < 32; addr++, i++)
+               pci_write_32(addr, cfg);
 }
 
 
@@ -283,44 +283,44 @@ musycc_init_mdt(mpi_t *pi)
 void
 musycc_update_tx_thp(mch_t *ch)
 {
-    struct mdesc *md;
-    unsigned long flags;
+       struct mdesc *md;
+       unsigned long flags;
 
-    spin_lock_irqsave(&ch->ch_txlock, flags);
-    while (1) {
-       md = ch->txd_irq_srv;
-       FLUSH_MEM_READ();
-       if (!md->data) {
-           /* No MDs with buffers to process */
-           spin_unlock_irqrestore(&ch->ch_txlock, flags);
-           return;
+       spin_lock_irqsave(&ch->ch_txlock, flags);
+       while (1) {
+               md = ch->txd_irq_srv;
+               FLUSH_MEM_READ();
+               if (!md->data) {
+                       /* No MDs with buffers to process */
+                       spin_unlock_irqrestore(&ch->ch_txlock, flags);
+                       return;
+               }
+               if ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED) {
+                       /* this is the MD to restart TX with */
+                       break;
+               }
+               /*
+                * Otherwise, we have a valid, host-owned message descriptor which
+                * has been successfully transmitted and whose buffer can be freed,
+                * so... process this MD, it's owned by the host.  (This might give
+                * as a new, updated txd_irq_srv.)
+                */
+               musycc_bh_tx_eom(ch->up, ch->gchan);
        }
-       if ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED) {
-           /* this is the MD to restart TX with */
-           break;
+       md = ch->txd_irq_srv;
+       ch->up->regram->thp[ch->gchan] = cpu_to_le32(OS_vtophys(md));
+       FLUSH_MEM_WRITE();
+
+       if (ch->tx_full) {
+               ch->tx_full = 0;
+               ch->txd_required = 0;
+               sd_enable_xmit(ch->user);  /* re-enable to catch flow controlled
+                                           * channel */
        }
-       /*
-        * Otherwise, we have a valid, host-owned message descriptor which
-        * has been successfully transmitted and whose buffer can be freed,
-        * so... process this MD, it's owned by the host.  (This might give
-        * as a new, updated txd_irq_srv.)
-        */
-       musycc_bh_tx_eom(ch->up, ch->gchan);
-    }
-    md = ch->txd_irq_srv;
-    ch->up->regram->thp[ch->gchan] = cpu_to_le32(OS_vtophys(md));
-    FLUSH_MEM_WRITE();
-
-    if (ch->tx_full) {
-       ch->tx_full = 0;
-       ch->txd_required = 0;
-       sd_enable_xmit(ch->user);  /* re-enable to catch flow controlled
-                                    * channel */
-    }
-    spin_unlock_irqrestore(&ch->ch_txlock, flags);
+       spin_unlock_irqrestore(&ch->ch_txlock, flags);
 
 #ifdef RLD_TRANS_DEBUG
-    pr_info("++ musycc_update_tx_thp[%d]: setting thp = %p, sts %x\n", ch->channum, md, md->status);
+       pr_info("++ musycc_update_tx_thp[%d]: setting thp = %p, sts %x\n", ch->channum, md, md->status);
 #endif
 }
 
@@ -337,96 +337,96 @@ musycc_update_tx_thp(mch_t *ch)
 void
 musycc_wq_chan_restart(void *arg)      /* channel private structure */
 {
-    mch_t      *ch;
-    mpi_t      *pi;
-    struct mdesc *md;
+       mch_t      *ch;
+       mpi_t      *pi;
+       struct mdesc *md;
 #if 0
-    unsigned long flags;
+       unsigned long flags;
 #endif
 
-    ch = container_of(arg, struct c4_chan_info, ch_work);
-    pi = ch->up;
+       ch = container_of(arg, struct c4_chan_info, ch_work);
+       pi = ch->up;
 
 #ifdef RLD_TRANS_DEBUG
-    pr_info("wq_chan_restart[%d]: start_RT[%d/%d] status %x\n",
-           ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status);
+       pr_info("wq_chan_restart[%d]: start_RT[%d/%d] status %x\n",
+               ch->channum, ch->ch_start_rx, ch->ch_start_tx, ch->status);
 
 #endif
 
-    /**********************************/
-    /** check for RX restart request **/
-    /**********************************/
+       /**********************************/
+       /** check for RX restart request **/
+       /**********************************/
 
-    if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) {
+       if ((ch->ch_start_rx) && (ch->status & RX_ENABLED)) {
 
-       ch->ch_start_rx = 0;
+               ch->ch_start_rx = 0;
 #if defined(RLD_TRANS_DEBUG) || defined(RLD_RXACT_DEBUG)
-       {
-           static int  hereb4 = 7;
+               {
+                       static int  hereb4 = 7;
 
-           if (hereb4) {            /* RLD DEBUG */
-               hereb4--;
+                       if (hereb4) {            /* RLD DEBUG */
+                               hereb4--;
 #ifdef RLD_TRANS_DEBUG
-               md = &ch->mdr[ch->rxix_irq_srv];
-               pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
-               ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
-                       ch->s.rx_packets);
+                               md = &ch->mdr[ch->rxix_irq_srv];
+                               pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
+                                       ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
+                                       ch->s.rx_packets);
 #elif defined(RLD_RXACT_DEBUG)
-               md = &ch->mdr[ch->rxix_irq_srv];
-               pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
-               ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
-                       ch->s.rx_packets);
-               musycc_dump_rxbuffer_ring(ch, 1);      /* RLD DEBUG */
+                               md = &ch->mdr[ch->rxix_irq_srv];
+                               pr_info("++ musycc_wq_chan_restart[%d] CHAN RX ACTIVATE: rxix_irq_srv %d, md %p sts %x, rxpkt %lu\n",
+                                       ch->channum, ch->rxix_irq_srv, md, le32_to_cpu(md->status),
+                                       ch->s.rx_packets);
+                               musycc_dump_rxbuffer_ring(ch, 1);      /* RLD DEBUG */
 #endif
-           }
-       }
+                       }
+               }
 #endif
-       musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan);
-    }
-    /**********************************/
-    /** check for TX restart request **/
-    /**********************************/
+               musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION | ch->gchan);
+       }
+       /**********************************/
+       /** check for TX restart request **/
+       /**********************************/
 
-    if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) {
-       /* find next unprocessed message, then set TX thp to it */
-       musycc_update_tx_thp(ch);
+       if ((ch->ch_start_tx) && (ch->status & TX_ENABLED)) {
+               /* find next unprocessed message, then set TX thp to it */
+               musycc_update_tx_thp(ch);
 
 #if 0
-       spin_lock_irqsave(&ch->ch_txlock, flags);
+               spin_lock_irqsave(&ch->ch_txlock, flags);
 #endif
-       md = ch->txd_irq_srv;
-       if (!md) {
+               md = ch->txd_irq_srv;
+               if (!md) {
 #ifdef RLD_TRANS_DEBUG
-           pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
+                       pr_info("-- musycc_wq_chan_restart[%d]: WARNING, starting NULL md\n", ch->channum);
 #endif
 #if 0
-           spin_unlock_irqrestore(&ch->ch_txlock, flags);
+                       spin_unlock_irqrestore(&ch->ch_txlock, flags);
 #endif
-       } else if (md->data && ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED)) {
-           ch->ch_start_tx = 0;
+               } else if (md->data && ((le32_to_cpu(md->status)) & MUSYCC_TX_OWNED)) {
+                       ch->ch_start_tx = 0;
 #if 0
-           spin_unlock_irqrestore(&ch->ch_txlock, flags);   /* allow interrupts for service request */
+                       spin_unlock_irqrestore(&ch->ch_txlock, flags);   /* allow interrupts for service request */
 #endif
 #ifdef RLD_TRANS_DEBUG
-           pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n",
-                   ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets);
+                       pr_info("++ musycc_wq_chan_restart() CHAN TX ACTIVATE: chan %d txd_irq_srv %p = sts %x, txpkt %lu\n",
+                               ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status, ch->s.tx_packets);
 #endif
-           musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
-       }
+                       musycc_serv_req(pi, SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION | ch->gchan);
+               }
 #ifdef RLD_RESTART_DEBUG
-       else {
-           /* retain request to start until retried and we have data to xmit */
-           pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
-                   ch->channum, md,
-                   le32_to_cpu(md->status),
-                   le32_to_cpu(md->data), ch->ch_start_tx);
-           musycc_dump_txbuffer_ring(ch, 0);
+               else {
+                       /* retain request to start until retried and we have data to xmit */
+                       pr_info("-- musycc_wq_chan_restart[%d]: DELAYED due to md %p sts %x data %x, start_tx %x\n",
+                               ch->channum, md,
+                               le32_to_cpu(md->status),
+                               le32_to_cpu(md->data), ch->ch_start_tx);
+                       musycc_dump_txbuffer_ring(ch, 0);
 #if 0
-           spin_unlock_irqrestore(&ch->ch_txlock, flags);   /* allow interrupts for service request */
+                       spin_unlock_irqrestore(&ch->ch_txlock, flags);   /* allow interrupts for service request */
 #endif
-       }
+               }
 #endif
-    }
+       }
 }
 
 
@@ -439,31 +439,30 @@ void
 musycc_chan_restart(mch_t *ch)
 {
 #ifdef RLD_RESTART_DEBUG
-    pr_info("++ musycc_chan_restart[%d]: txd_irq_srv @ %p = sts %x\n",
-           ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
+       pr_info("++ musycc_chan_restart[%d]: txd_irq_srv @ %p = sts %x\n",
+               ch->channum, ch->txd_irq_srv, ch->txd_irq_srv->status);
 #endif
 
-    /* 2.6 - find next unprocessed message, then set TX thp to it */
+       /* 2.6 - find next unprocessed message, then set TX thp to it */
 #ifdef RLD_RESTART_DEBUG
-    pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work);
+       pr_info(">> musycc_chan_restart: scheduling Chan %x workQ @ %p\n", ch->channum, &ch->ch_work);
 #endif
-    c4_wk_chan_restart(ch);        /* work queue mechanism fires off: Ref:
-                                    * musycc_wq_chan_restart () */
-
+       c4_wk_chan_restart(ch);        /* work queue mechanism fires off: Ref:
+                                       * musycc_wq_chan_restart () */
 }
 
 
 void
 rld_put_led(mpi_t *pi, u_int32_t ledval)
 {
-    static u_int32_t led = 0;
+       static u_int32_t led = 0;
 
-    if (ledval == 0)
-       led = 0;
-    else
-       led |= ledval;
+       if (ledval == 0)
+               led = 0;
+       else
+               led |= ledval;
 
-    pci_write_32((u_int32_t *) &pi->up->cpldbase->leds, led);  /* RLD DEBUG TRANHANG */
+       pci_write_32((u_int32_t *) &pi->up->cpldbase->leds, led);  /* RLD DEBUG TRANHANG */
 }
 
 
@@ -472,100 +471,100 @@ rld_put_led(mpi_t *pi, u_int32_t ledval)
 void
 musycc_serv_req(mpi_t *pi, u_int32_t req)
 {
-    volatile u_int32_t r;
-    int         rcnt;
+       volatile u_int32_t r;
+       int         rcnt;
 
-    /*
-     * PORT NOTE: Semaphore protect service loop guarantees only a single
-     * operation at a time.  Per MUSYCC Manual - "Issuing service requests to
-     * the same channel group without first receiving ACK from each request
-     * may cause the host to lose track of which service request has been
-     * acknowledged."
-     */
+       /*
+        * PORT NOTE: Semaphore protect service loop guarantees only a single
+        * operation at a time.  Per MUSYCC Manual - "Issuing service requests to
+        * the same channel group without first receiving ACK from each request
+        * may cause the host to lose track of which service request has been
+        * acknowledged."
+        */
 
-    SD_SEM_TAKE(&pi->sr_sem_busy, "serv");     /* only 1 thru here, per
-                                                * group */
+       SD_SEM_TAKE(&pi->sr_sem_busy, "serv");     /* only 1 thru here, per
+                                                   * group */
 
-    if (pi->sr_last == req) {
+       if (pi->sr_last == req) {
 #ifdef RLD_TRANS_DEBUG
-       pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
+               pr_info(">> same SR, Port %d Req %x\n", pi->portnum, req);
 #endif
 
-       /*
-        * The most likely repeated request is the channel activation command
-        * which follows the occurrence of a Transparent mode TX ONR or a
-        * BUFF error.  If the previous command was a CHANNEL ACTIVATE,
-        * precede it with a NOOP command in order maintain coherent control
-        * of this current (re)ACTIVATE.
-        */
+               /*
+                * The most likely repeated request is the channel activation command
+                * which follows the occurrence of a Transparent mode TX ONR or a
+                * BUFF error.  If the previous command was a CHANNEL ACTIVATE,
+                * precede it with a NOOP command in order maintain coherent control
+                * of this current (re)ACTIVATE.
+                */
 
-       r = (pi->sr_last & ~SR_GCHANNEL_MASK);
-       if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
-           (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) {
+               r = (pi->sr_last & ~SR_GCHANNEL_MASK);
+               if ((r == (SR_CHANNEL_ACTIVATE | SR_TX_DIRECTION)) ||
+                   (r == (SR_CHANNEL_ACTIVATE | SR_RX_DIRECTION))) {
 #ifdef RLD_TRANS_DEBUG
-           pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
+                       pr_info(">> same CHAN ACT SR, Port %d Req %x => issue SR_NOOP CMD\n", pi->portnum, req);
 #endif
-           SD_SEM_GIVE(&pi->sr_sem_busy);     /* allow this next request */
-           musycc_serv_req(pi, SR_NOOP);
-           SD_SEM_TAKE(&pi->sr_sem_busy, "serv");     /* relock & continue w/
-                                                        * original req */
-       } else if (req == SR_NOOP) {
-           /* no need to issue back-to-back SR_NOOP commands at this time */
+                       SD_SEM_GIVE(&pi->sr_sem_busy);     /* allow this next request */
+                       musycc_serv_req(pi, SR_NOOP);
+                       SD_SEM_TAKE(&pi->sr_sem_busy, "serv");     /* relock & continue w/
+                                                                   * original req */
+               } else if (req == SR_NOOP) {
+                       /* no need to issue back-to-back SR_NOOP commands at this time */
 #ifdef RLD_TRANS_DEBUG
-           pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
+                       pr_info(">> same Port SR_NOOP skipped, Port %d\n", pi->portnum);
 #endif
-           SD_SEM_GIVE(&pi->sr_sem_busy);     /* allow this next request */
-           return;
+                       SD_SEM_GIVE(&pi->sr_sem_busy);     /* allow this next request */
+                       return;
+               }
        }
-    }
-    rcnt = 0;
-    pi->sr_last = req;
+       rcnt = 0;
+       pi->sr_last = req;
 rewrite:
-    pci_write_32((u_int32_t *) &pi->reg->srd, req);
-    FLUSH_MEM_WRITE();
-
-    /*
-     * Per MUSYCC Manual, Section 6.1,2 - "When writing an SCR service
-     * request, the host must ensure at least one PCI bus clock cycle has
-     * elapsed before writing another service request.  To meet this minimum
-     * elapsed service request write timing interval, it is recommended that
-     * the host follow any SCR write with another operation which reads from
-     * the same address."
-     */
-    r = pci_read_32((u_int32_t *) &pi->reg->srd);      /* adhere to write
-                                                        * timing imposition */
-
-
-    if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) {
-       if (cxt1e1_log_level >= LOG_MONITOR)
-           pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
-                   pi->up->devname, rcnt, req, pi->sr_last, r,
-                   (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f));
-       OS_uwait_dummy();          /* this delay helps reduce reissue counts
-                                    * (reason not yet researched) */
-       goto rewrite;
-    }
-    if (rcnt > MUSYCC_SR_RETRY_CNT) {
-       pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
-                  pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
-       SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
-       return;
-    }
-    if (req == SR_CHIP_RESET) {
+       pci_write_32((u_int32_t *) &pi->reg->srd, req);
+       FLUSH_MEM_WRITE();
+
        /*
-        * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
-        * the upcoming delay is used.  Though the MUSYCC documentation
-        * suggests a read-after-write would supply the required delay, it's
-        * unclear what CPU/BUS clock speeds might have been assumed when
-        * suggesting this 'lack of ACK' workaround.  Thus the use of uwait.
+        * Per MUSYCC Manual, Section 6.1,2 - "When writing an SCR service
+        * request, the host must ensure at least one PCI bus clock cycle has
+        * elapsed before writing another service request.  To meet this minimum
+        * elapsed service request write timing interval, it is recommended that
+        * the host follow any SCR write with another operation which reads from
+        * the same address."
         */
-       OS_uwait(100000, "icard"); /* 100ms */
-    } else {
-       FLUSH_MEM_READ();
-       SD_SEM_TAKE(&pi->sr_sem_wait, "sakack");       /* sleep until SACK
-                                                        * interrupt occurs */
-    }
-    SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
+       r = pci_read_32((u_int32_t *) &pi->reg->srd);      /* adhere to write
+                                                           * timing imposition */
+
+
+       if ((r != req) && (req != SR_CHIP_RESET) && (++rcnt <= MUSYCC_SR_RETRY_CNT)) {
+               if (cxt1e1_log_level >= LOG_MONITOR)
+                       pr_info("%s: %d - reissue srv req/last %x/%x (hdw reads %x), Chan %d.\n",
+                               pi->up->devname, rcnt, req, pi->sr_last, r,
+                               (pi->portnum * MUSYCC_NCHANS) + (req & 0x1f));
+               OS_uwait_dummy();          /* this delay helps reduce reissue counts
+                                           * (reason not yet researched) */
+               goto rewrite;
+       }
+       if (rcnt > MUSYCC_SR_RETRY_CNT) {
+               pr_warning("%s: failed service request (#%d)= %x, group %d.\n",
+                          pi->up->devname, MUSYCC_SR_RETRY_CNT, req, pi->portnum);
+               SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
+               return;
+       }
+       if (req == SR_CHIP_RESET) {
+               /*
+                * PORT NOTE: the CHIP_RESET command is NOT ack'd by the MUSYCC, thus
+                * the upcoming delay is used.  Though the MUSYCC documentation
+                * suggests a read-after-write would supply the required delay, it's
+                * unclear what CPU/BUS clock speeds might have been assumed when
+                * suggesting this 'lack of ACK' workaround.  Thus the use of uwait.
+                */
+               OS_uwait(100000, "icard"); /* 100ms */
+       } else {
+               FLUSH_MEM_READ();
+               SD_SEM_TAKE(&pi->sr_sem_wait, "sakack");       /* sleep until SACK
+                                                               * interrupt occurs */
+       }
+       SD_SEM_GIVE(&pi->sr_sem_busy); /* allow any next request */
 }
 
 
@@ -573,94 +572,94 @@ rewrite:
 void
 musycc_update_timeslots(mpi_t *pi)
 {
-    int         i, ch;
-    char        e1mode = IS_FRAME_ANY_E1(pi->p.port_mode);
+       int         i, ch;
+       char        e1mode = IS_FRAME_ANY_E1(pi->p.port_mode);
 
-    for (i = 0; i < 32; i++) {
-       int         usedby = 0, last = 0, ts, j, bits[8];
+       for (i = 0; i < 32; i++) {
+               int         usedby = 0, last = 0, ts, j, bits[8];
 
-       u_int8_t lastval = 0;
+               u_int8_t lastval = 0;
 
-       if (((i == 0) && e1mode) || /* disable if  E1 mode */
-           ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
-           || ((i > 23) && (!e1mode))) /* disable if T1 mode */
-           pi->tsm[i] = 0xff;      /* make tslot unavailable for this mode */
-       else
-           pi->tsm[i] = 0x00;      /* make tslot available for assignment */
-       for (j = 0; j < 8; j++)
-           bits[j] = -1;
-       for (ch = 0; ch < MUSYCC_NCHANS; ch++) {
-           if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) {
-               usedby++;
-               last = ch;
-               lastval = pi->chan[ch]->p.bitmask[i];
+               if (((i == 0) && e1mode) || /* disable if  E1 mode */
+                   ((i == 16) && ((pi->p.port_mode == CFG_FRAME_E1CRC_CAS) || (pi->p.port_mode == CFG_FRAME_E1CRC_CAS_AMI)))
+                   || ((i > 23) && (!e1mode))) /* disable if T1 mode */
+                       pi->tsm[i] = 0xff;      /* make tslot unavailable for this mode */
+               else
+                       pi->tsm[i] = 0x00;      /* make tslot available for assignment */
                for (j = 0; j < 8; j++)
-                   if (lastval & (1 << j))
-                       bits[j] = ch;
-               pi->tsm[i] |= lastval;
-           }
-       }
-       if (!usedby)
-           ts = 0;
-       else if ((usedby == 1) && (lastval == 0xff))
-           ts = (4 << 5) | last;
-       else if ((usedby == 1) && (lastval == 0x7f))
-           ts = (5 << 5) | last;
-       else {
-           int         idx;
-
-           if (bits[0] < 0)
-               ts = (6 << 5) | (idx = last);
-           else
-               ts = (7 << 5) | (idx = bits[0]);
-           for (j = 1; j < 8; j++) {
-               pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
-               pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
-           }
+                       bits[j] = -1;
+               for (ch = 0; ch < MUSYCC_NCHANS; ch++) {
+                       if ((pi->chan[ch]->state == UP) && (pi->chan[ch]->p.bitmask[i])) {
+                               usedby++;
+                               last = ch;
+                               lastval = pi->chan[ch]->p.bitmask[i];
+                               for (j = 0; j < 8; j++)
+                                       if (lastval & (1 << j))
+                                               bits[j] = ch;
+                               pi->tsm[i] |= lastval;
+                       }
+               }
+               if (!usedby)
+                       ts = 0;
+               else if ((usedby == 1) && (lastval == 0xff))
+                       ts = (4 << 5) | last;
+               else if ((usedby == 1) && (lastval == 0x7f))
+                       ts = (5 << 5) | last;
+               else {
+                       int         idx;
+
+                       if (bits[0] < 0)
+                               ts = (6 << 5) | (idx = last);
+                       else
+                               ts = (7 << 5) | (idx = bits[0]);
+                       for (j = 1; j < 8; j++) {
+                               pi->regram->rscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
+                               pi->regram->tscm[idx * 8 + j] = (bits[j] < 0) ? 0 : (0x80 | bits[j]);
+                       }
+               }
+               pi->regram->rtsm[i] = ts;
+               pi->regram->ttsm[i] = ts;
        }
-       pi->regram->rtsm[i] = ts;
-       pi->regram->ttsm[i] = ts;
-    }
-    FLUSH_MEM_WRITE();
-
-    musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
-    musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
-    musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_RX_DIRECTION);
-    musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_TX_DIRECTION);
+       FLUSH_MEM_WRITE();
+
+       musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
+       musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
+       musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_RX_DIRECTION);
+       musycc_serv_req(pi, SR_SUBCHANNEL_MAP | SR_TX_DIRECTION);
 }
 #endif
 
 
 #ifdef SBE_WAN256T3_ENABLE
-void
+       void
 musycc_update_timeslots(mpi_t *pi)
 {
-    mch_t      *ch;
+       mch_t      *ch;
 
-    u_int8_t    ts, hmask, tsen;
-    int         gchan;
-    int         i;
+       u_int8_t    ts, hmask, tsen;
+       int         gchan;
+       int         i;
 
 #ifdef SBE_PMCC4_ENABLE
-    hmask = (0x1f << pi->up->p.hypersize) & 0x1f;
+       hmask = (0x1f << pi->up->p.hypersize) & 0x1f;
 #endif
 #ifdef SBE_WAN256T3_ENABLE
-    hmask = (0x1f << hyperdummy) & 0x1f;
+       hmask = (0x1f << hyperdummy) & 0x1f;
 #endif
-    for (i = 0; i < 128; i++) {
-       gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
-       ch = pi->chan[gchan];
-       if (ch->p.mode_56k)
-           tsen = MODE_56KBPS;
-       else
-           tsen = MODE_64KBPS;     /* also the default */
-       ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0;
-       pi->regram->rtsm[i] = ts;
-       pi->regram->ttsm[i] = ts;
-    }
-    FLUSH_MEM_WRITE();
-    musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
-    musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
+       for (i = 0; i < 128; i++) {
+               gchan = ((pi->portnum * MUSYCC_NCHANS) + (i & hmask)) % MUSYCC_NCHANS;
+               ch = pi->chan[gchan];
+               if (ch->p.mode_56k)
+                       tsen = MODE_56KBPS;
+               else
+                       tsen = MODE_64KBPS;     /* also the default */
+               ts = ((pi->portnum % 4) == (i / 32)) ? (tsen << 5) | (i & hmask) : 0;
+               pi->regram->rtsm[i] = ts;
+               pi->regram->ttsm[i] = ts;
+       }
+       FLUSH_MEM_WRITE();
+       musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_RX_DIRECTION);
+       musycc_serv_req(pi, SR_TIMESLOT_MAP | SR_TX_DIRECTION);
 }
 #endif
 
@@ -672,59 +671,59 @@ musycc_update_timeslots(mpi_t *pi)
 u_int32_t
 musycc_chan_proto(int proto)
 {
-    int         reg;
-
-    switch (proto) {
-    case CFG_CH_PROTO_TRANS:        /* 0 */
-       reg = MUSYCC_CCD_TRANS;
-       break;
-    case CFG_CH_PROTO_SS7:          /* 1 */
-       reg = MUSYCC_CCD_SS7;
-       break;
-    default:
-    case CFG_CH_PROTO_ISLP_MODE:   /* 4 */
-    case CFG_CH_PROTO_HDLC_FCS16:  /* 2 */
-       reg = MUSYCC_CCD_HDLC_FCS16;
-       break;
-    case CFG_CH_PROTO_HDLC_FCS32:  /* 3 */
-       reg = MUSYCC_CCD_HDLC_FCS32;
-       break;
-    }
-
-    return reg;
+       int         reg;
+
+       switch (proto) {
+       case CFG_CH_PROTO_TRANS:        /* 0 */
+               reg = MUSYCC_CCD_TRANS;
+               break;
+       case CFG_CH_PROTO_SS7:          /* 1 */
+               reg = MUSYCC_CCD_SS7;
+               break;
+       default:
+       case CFG_CH_PROTO_ISLP_MODE:   /* 4 */
+       case CFG_CH_PROTO_HDLC_FCS16:  /* 2 */
+               reg = MUSYCC_CCD_HDLC_FCS16;
+               break;
+       case CFG_CH_PROTO_HDLC_FCS32:  /* 3 */
+               reg = MUSYCC_CCD_HDLC_FCS32;
+               break;
+       }
+
+       return reg;
 }
 
 #ifdef SBE_WAN256T3_ENABLE
 static void __init
 musycc_init_port(mpi_t *pi)
 {
-    pci_write_32((u_int32_t *) &pi->reg->gbp, OS_vtophys(pi->regram));
-
-    pi->regram->grcd =
-       __constant_cpu_to_le32(MUSYCC_GRCD_RX_ENABLE |
-                               MUSYCC_GRCD_TX_ENABLE |
-                               MUSYCC_GRCD_SF_ALIGN |
-                               MUSYCC_GRCD_SUBCHAN_DISABLE |
-                               MUSYCC_GRCD_OOFMP_DISABLE |
-                               MUSYCC_GRCD_COFAIRQ_DISABLE |
-                               MUSYCC_GRCD_MC_ENABLE |
-                      (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));
-
-    pi->regram->pcd =
-       __constant_cpu_to_le32(MUSYCC_PCD_E1X4_MODE |
-                               MUSYCC_PCD_TXDATA_RISING |
-                               MUSYCC_PCD_TX_DRIVEN);
-
-    /* Message length descriptor */
-       pi->regram->mld = __constant_cpu_to_le32(cxt1e1_max_mru | (cxt1e1_max_mru << 16));
-    FLUSH_MEM_WRITE();
+       pci_write_32((u_int32_t *) &pi->reg->gbp, OS_vtophys(pi->regram));
+
+       pi->regram->grcd =
+               __constant_cpu_to_le32(MUSYCC_GRCD_RX_ENABLE |
+                                      MUSYCC_GRCD_TX_ENABLE |
+                                      MUSYCC_GRCD_SF_ALIGN |
+                                      MUSYCC_GRCD_SUBCHAN_DISABLE |
+                                      MUSYCC_GRCD_OOFMP_DISABLE |
+                                      MUSYCC_GRCD_COFAIRQ_DISABLE |
+                                      MUSYCC_GRCD_MC_ENABLE |
+                                      (MUSYCC_GRCD_POLLTH_32 << MUSYCC_GRCD_POLLTH_SHIFT));
+
+       pi->regram->pcd =
+               __constant_cpu_to_le32(MUSYCC_PCD_E1X4_MODE |
+                                      MUSYCC_PCD_TXDATA_RISING |
+                                      MUSYCC_PCD_TX_DRIVEN);
+
+       /* Message length descriptor */
+       pi->regram->mld = __constant_cpu_to_le32(cxt1e1_max_mru | (cxt1e1_max_mru << 16));
+       FLUSH_MEM_WRITE();
 
-    musycc_serv_req(pi, SR_GROUP_INIT | SR_RX_DIRECTION);
-    musycc_serv_req(pi, SR_GROUP_INIT | SR_TX_DIRECTION);
+       musycc_serv_req(pi, SR_GROUP_INIT | SR_RX_DIRECTION);
+       musycc_serv_req(pi, SR_GROUP_INIT | SR_TX_DIRECTION);
 
-    musycc_init_mdt(pi);
+       musycc_init_mdt(pi);
 
-    musycc_update_timeslots(pi);
+       musycc_update_timeslots(pi);
 }
 #endif
 
@@ -732,273 +731,273 @@ musycc_init_port(mpi_t *pi)
 status_t    __init
 musycc_init(ci_t *ci)
 {
-    char       *regaddr;        /* temp for address boundary calculations */
-    int         i, gchan;
+       char       *regaddr;        /* temp for address boundary calculations */
+       int         i, gchan;
 
-    OS_sem_init(&ci->sem_wdbusy, SEM_AVAILABLE);       /* watchdog exclusion */
+       OS_sem_init(&ci->sem_wdbusy, SEM_AVAILABLE);       /* watchdog exclusion */
 
-    /*
-     * Per MUSYCC manual, Section 6.3.4 - "The host must allocate a dword
-     * aligned memory segment for interrupt queue pointers."
-     */
+       /*
+        * Per MUSYCC manual, Section 6.3.4 - "The host must allocate a dword
+        * aligned memory segment for interrupt queue pointers."
+        */
 
 #define INT_QUEUE_BOUNDARY  4
 
        regaddr = kzalloc((INT_QUEUE_SIZE + 1) * sizeof(u_int32_t),
                          GFP_KERNEL | GFP_DMA);
-    if (!regaddr)
-       return -ENOMEM;
-    ci->iqd_p_saved = regaddr;      /* save orig value for free's usage */
-    ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) &
-                              (~(INT_QUEUE_BOUNDARY - 1)));    /* this calculates
-                                                                * closest boundary */
+       if (!regaddr)
+               return -ENOMEM;
+       ci->iqd_p_saved = regaddr;      /* save orig value for free's usage */
+       ci->iqd_p = (u_int32_t *) ((unsigned long) (regaddr + INT_QUEUE_BOUNDARY - 1) &
+                       (~(INT_QUEUE_BOUNDARY - 1)));    /* this calculates
+                                                         * closest boundary */
 
-    for (i = 0; i < INT_QUEUE_SIZE; i++)
-       ci->iqd_p[i] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
+       for (i = 0; i < INT_QUEUE_SIZE; i++)
+               ci->iqd_p[i] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
 
-    for (i = 0; i < ci->max_port; i++) {
-       mpi_t      *pi = &ci->port[i];
+       for (i = 0; i < ci->max_port; i++) {
+               mpi_t      *pi = &ci->port[i];
 
-       /*
-        * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB
-        * bound memory segment for Channel Group 0."
-        */
+               /*
+                * Per MUSYCC manual, Section 6.3.2 - "The host must allocate a 2KB
+                * bound memory segment for Channel Group 0."
+                */
 
 #define GROUP_BOUNDARY   0x800
 
-       regaddr = kzalloc(sizeof(struct musycc_groupr) + GROUP_BOUNDARY,
-                         GFP_KERNEL | GFP_DMA);
-       if (!regaddr) {
-           for (gchan = 0; gchan < i; gchan++) {
-               pi = &ci->port[gchan];
-               kfree(pi->reg);
-               pi->reg = NULL;
-           }
-           return -ENOMEM;
+               regaddr = kzalloc(sizeof(struct musycc_groupr) + GROUP_BOUNDARY,
+                                 GFP_KERNEL | GFP_DMA);
+               if (!regaddr) {
+                       for (gchan = 0; gchan < i; gchan++) {
+                               pi = &ci->port[gchan];
+                               kfree(pi->reg);
+                               pi->reg = NULL;
+                       }
+                       return -ENOMEM;
+               }
+               pi->regram_saved = regaddr; /* save orig value for free's usage */
+               pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
+                               (~(GROUP_BOUNDARY - 1)));        /* this calculates
+                                                                 * closest boundary */
        }
-       pi->regram_saved = regaddr; /* save orig value for free's usage */
-       pi->regram = (struct musycc_groupr *) ((unsigned long) (regaddr + GROUP_BOUNDARY - 1) &
-                                              (~(GROUP_BOUNDARY - 1)));        /* this calculates
-                                                                                * closest boundary */
-    }
-
-    /* any board centric MUSYCC commands will use group ZERO as its "home" */
-    ci->regram = ci->port[0].regram;
-    musycc_serv_req(&ci->port[0], SR_CHIP_RESET);
-
-    pci_write_32((u_int32_t *) &ci->reg->gbp, OS_vtophys(ci->regram));
-    pci_flush_write(ci);
+
+       /* any board centric MUSYCC commands will use group ZERO as its "home" */
+       ci->regram = ci->port[0].regram;
+       musycc_serv_req(&ci->port[0], SR_CHIP_RESET);
+
+       pci_write_32((u_int32_t *) &ci->reg->gbp, OS_vtophys(ci->regram));
+       pci_flush_write(ci);
 #ifdef CONFIG_SBE_PMCC4_NCOMM
-    ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC);
+       ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC);
 #else
-    /* standard driver POLLS for INTB via CPLD register */
-    ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
+       /* standard driver POLLS for INTB via CPLD register */
+       ci->regram->__glcd = __constant_cpu_to_le32(GCD_MAGIC | MUSYCC_GCD_INTB_DISABLE);
 #endif
 
-    ci->regram->__iqp = cpu_to_le32(OS_vtophys(&ci->iqd_p[0]));
-    ci->regram->__iql = __constant_cpu_to_le32(INT_QUEUE_SIZE - 1);
-    pci_write_32((u_int32_t *) &ci->reg->dacbp, 0);
-    FLUSH_MEM_WRITE();
+       ci->regram->__iqp = cpu_to_le32(OS_vtophys(&ci->iqd_p[0]));
+       ci->regram->__iql = __constant_cpu_to_le32(INT_QUEUE_SIZE - 1);
+       pci_write_32((u_int32_t *) &ci->reg->dacbp, 0);
+       FLUSH_MEM_WRITE();
 
-    ci->state = C_RUNNING;          /* mark as full interrupt processing
-                                    * available */
+       ci->state = C_RUNNING;          /* mark as full interrupt processing
+                                        * available */
 
-    musycc_serv_req(&ci->port[0], SR_GLOBAL_INIT);     /* FIRST INTERRUPT ! */
+       musycc_serv_req(&ci->port[0], SR_GLOBAL_INIT);     /* FIRST INTERRUPT ! */
 
-    /* sanity check settable parameters */
+       /* sanity check settable parameters */
 
-       if (cxt1e1_max_mru > 0xffe) {
-       pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
-                                 cxt1e1_max_mru, 0xffe);
-              cxt1e1_max_mru = 0xffe;
-    }
-       if (cxt1e1_max_mtu > 0xffe) {
-       pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
-                                 cxt1e1_max_mtu, 0xffe);
-              cxt1e1_max_mtu = 0xffe;
-    }
+       if (cxt1e1_max_mru > 0xffe) {
+               pr_warning("Maximum allowed MRU exceeded, resetting %d to %d.\n",
+                          cxt1e1_max_mru, 0xffe);
+               cxt1e1_max_mru = 0xffe;
+       }
+       if (cxt1e1_max_mtu > 0xffe) {
+               pr_warning("Maximum allowed MTU exceeded, resetting %d to %d.\n",
+                          cxt1e1_max_mtu, 0xffe);
+               cxt1e1_max_mtu = 0xffe;
+       }
 #ifdef SBE_WAN256T3_ENABLE
-    for (i = 0; i < MUSYCC_NPORTS; i++)
-       musycc_init_port(&ci->port[i]);
+       for (i = 0; i < MUSYCC_NPORTS; i++)
+               musycc_init_port(&ci->port[i]);
 #endif
 
-    return SBE_DRVR_SUCCESS;        /* no error */
+       return SBE_DRVR_SUCCESS;        /* no error */
 }
 
 
 void
 musycc_bh_tx_eom(mpi_t *pi, int gchan)
 {
-    mch_t      *ch;
-    struct mdesc *md;
+       mch_t      *ch;
+       struct mdesc *md;
 
 #if 0
 #ifndef SBE_ISR_INLINE
-    unsigned long flags;
+       unsigned long flags;
 
 #endif
 #endif
-    volatile u_int32_t status;
-
-    ch = pi->chan[gchan];
-    if (!ch || ch->state != UP) {
-       if (cxt1e1_log_level >= LOG_ERROR)
-           pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
-                   pi->up->devname, gchan);
-    }
-    if (!ch || !ch->mdt)
-       return;                     /* note: mdt==0 implies a malloc()
-                                    * failure w/in chan_up() routine */
+       volatile u_int32_t status;
+
+       ch = pi->chan[gchan];
+       if (!ch || ch->state != UP) {
+               if (cxt1e1_log_level >= LOG_ERROR)
+                       pr_info("%s: intr: xmit EOM on uninitialized channel %d\n",
+                               pi->up->devname, gchan);
+       }
+       if (!ch || !ch->mdt)
+               return;                     /* note: mdt==0 implies a malloc()
+                                            * failure w/in chan_up() routine */
 
 #if 0
 #ifdef SBE_ISR_INLINE
-    spin_lock_irq(&ch->ch_txlock);
+       spin_lock_irq(&ch->ch_txlock);
 #else
-    spin_lock_irqsave(&ch->ch_txlock, flags);
+       spin_lock_irqsave(&ch->ch_txlock, flags);
 #endif
 #endif
-    do {
-       FLUSH_MEM_READ();
-       md = ch->txd_irq_srv;
-       status = le32_to_cpu(md->status);
-
-       /*
-        * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
-        * Transmit Buffer Descriptor during Transparent Mode.
-        */
-       if (status & MUSYCC_TX_OWNED) {
-           int         readCount, loopCount;
-
-           /***********************************************************/
-           /* HW Bug Fix                                              */
-           /* ----------                                              */
-           /* Under certain PCI Bus loading conditions, the data      */
-           /* associated with an update of Shared Memory is delayed   */
-           /* relative to its PCI Interrupt.  This is caught when     */
-           /* the host determines it does not yet OWN the descriptor. */
-           /***********************************************************/
-
-           readCount = 0;
-           while (status & MUSYCC_TX_OWNED) {
-               for (loopCount = 0; loopCount < 0x30; loopCount++)
-                   OS_uwait_dummy();  /* use call to avoid optimization
-                                        * removal of dummy delay */
+       do {
                FLUSH_MEM_READ();
+               md = ch->txd_irq_srv;
                status = le32_to_cpu(md->status);
-               if (readCount++ > 40)
-                   break;          /* don't wait any longer */
-           }
-           if (status & MUSYCC_TX_OWNED) {
-               if (cxt1e1_log_level >= LOG_MONITOR) {
-                   pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
-                           pi->up->devname, pi->portnum, ch->channum,
-                           md, status);
-                   pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
-                           ch->user, ch->txd_irq_srv, ch->txd_usr_add,
-                           sd_queue_stopped(ch->user),
-                           ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
-                   musycc_dump_txbuffer_ring(ch, 0);
+
+               /*
+                * Note: Per MUSYCC Ref 6.4.9, the host does not poll a host-owned
+                * Transmit Buffer Descriptor during Transparent Mode.
+                */
+               if (status & MUSYCC_TX_OWNED) {
+                       int         readCount, loopCount;
+
+                       /***********************************************************/
+                       /* HW Bug Fix                                              */
+                       /* ----------                                              */
+                       /* Under certain PCI Bus loading conditions, the data      */
+                       /* associated with an update of Shared Memory is delayed   */
+                       /* relative to its PCI Interrupt.  This is caught when     */
+                       /* the host determines it does not yet OWN the descriptor. */
+                       /***********************************************************/
+
+                       readCount = 0;
+                       while (status & MUSYCC_TX_OWNED) {
+                               for (loopCount = 0; loopCount < 0x30; loopCount++)
+                                       OS_uwait_dummy();  /* use call to avoid optimization
+                                                           * removal of dummy delay */
+                               FLUSH_MEM_READ();
+                               status = le32_to_cpu(md->status);
+                               if (readCount++ > 40)
+                                       break;          /* don't wait any longer */
+                       }
+                       if (status & MUSYCC_TX_OWNED) {
+                               if (cxt1e1_log_level >= LOG_MONITOR) {
+                                       pr_info("%s: Port %d Chan %2d - unexpected TX msg ownership intr (md %p sts %x)\n",
+                                               pi->up->devname, pi->portnum, ch->channum,
+                                               md, status);
+                                       pr_info("++ User 0x%p IRQ_SRV 0x%p USR_ADD 0x%p QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
+                                               ch->user, ch->txd_irq_srv, ch->txd_usr_add,
+                                               sd_queue_stopped(ch->user),
+                                               ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+                                       musycc_dump_txbuffer_ring(ch, 0);
+                               }
+                               break;              /* Not our mdesc, done */
+                       } else {
+                               if (cxt1e1_log_level >= LOG_MONITOR)
+                                       pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
+                                               pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
+                       }
                }
-               break;              /* Not our mdesc, done */
-           } else {
-               if (cxt1e1_log_level >= LOG_MONITOR)
-                   pr_info("%s: Port %d Chan %2d - recovered TX msg ownership [%d] (md %p sts %x)\n",
-                           pi->up->devname, pi->portnum, ch->channum, readCount, md, status);
-           }
-       }
-       ch->txd_irq_srv = md->snext;
-
-       md->data = 0;
-       if (md->mem_token)      {
-           /* upcount channel */
-           atomic_sub(OS_mem_token_tlen(md->mem_token), &ch->tx_pending);
-           /* upcount card */
-           atomic_sub(OS_mem_token_tlen(md->mem_token), &pi->up->tx_pending);
+               ch->txd_irq_srv = md->snext;
+
+               md->data = 0;
+               if (md->mem_token)      {
+                       /* upcount channel */
+                       atomic_sub(OS_mem_token_tlen(md->mem_token), &ch->tx_pending);
+                       /* upcount card */
+                       atomic_sub(OS_mem_token_tlen(md->mem_token), &pi->up->tx_pending);
 #ifdef SBE_WAN256T3_ENABLE
-           if (!atomic_read(&pi->up->tx_pending))
-               wan256t3_led(pi->up, LED_TX, 0);
+                       if (!atomic_read(&pi->up->tx_pending))
+                               wan256t3_led(pi->up, LED_TX, 0);
 #endif
 
 #ifdef CONFIG_SBE_WAN256T3_NCOMM
-           /* callback that our packet was sent */
-           {
-               int         hdlcnum = (pi->portnum * 32 + gchan);
-
-               if (hdlcnum >= 228) {
-                   if (nciProcess_TX_complete)
-                       (*nciProcess_TX_complete) (hdlcnum,
-                                                  getuserbychan(gchan));
-               }
-           }
+                       /* callback that our packet was sent */
+                       {
+                               int         hdlcnum = (pi->portnum * 32 + gchan);
+
+                               if (hdlcnum >= 228) {
+                                       if (nciProcess_TX_complete)
+                                               (*nciProcess_TX_complete) (hdlcnum,
+                                                               getuserbychan(gchan));
+                               }
+                       }
 #endif                              /*** CONFIG_SBE_WAN256T3_NCOMM ***/
 
-           OS_mem_token_free_irq(md->mem_token);
-           md->mem_token = NULL;
-       }
-       md->status = 0;
+                       OS_mem_token_free_irq(md->mem_token);
+                       md->mem_token = NULL;
+               }
+               md->status = 0;
 #ifdef RLD_TXFULL_DEBUG
-       if (cxt1e1_log_level >= LOG_MONITOR2)
-           pr_info("~~ tx_eom: tx_full %x  txd_free %d -> %d\n",
-                   ch->tx_full, ch->txd_free, ch->txd_free + 1);
+               if (cxt1e1_log_level >= LOG_MONITOR2)
+                       pr_info("~~ tx_eom: tx_full %x  txd_free %d -> %d\n",
+                               ch->tx_full, ch->txd_free, ch->txd_free + 1);
 #endif
-       ++ch->txd_free;
-       FLUSH_MEM_WRITE();
+               ++ch->txd_free;
+               FLUSH_MEM_WRITE();
+
+               if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) {
+                       if (cxt1e1_log_level >= LOG_MONITOR)
+                               pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
+                                       pi->up->devname, ch->p.chan_mode, status);
+                       if ((status & EOMIRQ_ENABLE) == 0)
+                               break;
+               }
+       } while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
+       /*
+        * NOTE: (The above 'while' is coupled w/ previous 'do', way above.) Each
+        * Transparent data buffer has the EOB bit, and NOT the EOM bit, set and
+        * will furthermore have a separate IQD associated with each messages
+        * buffer.
+        */
 
-       if ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && (status & EOBIRQ_ENABLE)) {
-           if (cxt1e1_log_level >= LOG_MONITOR)
-               pr_info("%s: Mode (%x) incorrect EOB status (%x)\n",
-                       pi->up->devname, ch->p.chan_mode, status);
-           if ((status & EOMIRQ_ENABLE) == 0)
-               break;
-       }
-    } while ((ch->p.chan_mode != CFG_CH_PROTO_TRANS) && ((status & EOMIRQ_ENABLE) == 0));
-    /*
-     * NOTE: (The above 'while' is coupled w/ previous 'do', way above.) Each
-     * Transparent data buffer has the EOB bit, and NOT the EOM bit, set and
-     * will furthermore have a separate IQD associated with each messages
-     * buffer.
-     */
-
-    FLUSH_MEM_READ();
-    /*
-     * Smooth flow control hysterisis by maintaining task stoppage until half
-     * the available write buffers are available.
-     */
-    if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) {
+       FLUSH_MEM_READ();
        /*
-        * Then, only releave task stoppage if we actually have enough
-        * buffers to service the last requested packet.  It may require MORE
-        * than half the available!
+        * Smooth flow control hysterisis by maintaining task stoppage until half
+        * the available write buffers are available.
         */
-       if (ch->txd_free >= ch->txd_required) {
+       if (ch->tx_full && (ch->txd_free >= (ch->txd_num / 2))) {
+               /*
+                * Then, only releave task stoppage if we actually have enough
+                * buffers to service the last requested packet.  It may require MORE
+                * than half the available!
+                */
+               if (ch->txd_free >= ch->txd_required) {
 
 #ifdef RLD_TXFULL_DEBUG
-           if (cxt1e1_log_level >= LOG_MONITOR2)
-               pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n",
-                       ch->channum,
-                       ch->txd_free, ch->txd_num / 2);
+                       if (cxt1e1_log_level >= LOG_MONITOR2)
+                               pr_info("tx_eom[%d]: enable xmit tx_full no more, txd_free %d txd_num/2 %d\n",
+                                       ch->channum,
+                                       ch->txd_free, ch->txd_num / 2);
 #endif
-           ch->tx_full = 0;
-           ch->txd_required = 0;
-           sd_enable_xmit(ch->user);  /* re-enable to catch flow controlled
-                                        * channel */
+                       ch->tx_full = 0;
+                       ch->txd_required = 0;
+                       sd_enable_xmit(ch->user);  /* re-enable to catch flow controlled
+                                                   * channel */
+               }
        }
-    }
 #ifdef RLD_TXFULL_DEBUG
-    else if (ch->tx_full) {
-       if (cxt1e1_log_level >= LOG_MONITOR2)
-           pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
-                   ch->channum,
-                   ch->txd_free, ch->txd_num / 2);
-    }
+       else if (ch->tx_full) {
+               if (cxt1e1_log_level >= LOG_MONITOR2)
+                       pr_info("tx_eom[%d]: bypass TX enable though room available? (txd_free %d txd_num/2 %d)\n",
+                               ch->channum,
+                               ch->txd_free, ch->txd_num / 2);
+       }
 #endif
 
-    FLUSH_MEM_WRITE();
+       FLUSH_MEM_WRITE();
 #if 0
 #ifdef SBE_ISR_INLINE
-    spin_unlock_irq(&ch->ch_txlock);
+       spin_unlock_irq(&ch->ch_txlock);
 #else
-    spin_unlock_irqrestore(&ch->ch_txlock, flags);
+       spin_unlock_irqrestore(&ch->ch_txlock, flags);
 #endif
 #endif
 }
@@ -1007,217 +1006,217 @@ musycc_bh_tx_eom(mpi_t *pi, int gchan)
 static void
 musycc_bh_rx_eom(mpi_t *pi, int gchan)
 {
-    mch_t      *ch;
-    void       *m, *m2;
-    struct mdesc *md;
-    volatile u_int32_t status;
-    u_int32_t   error;
-
-    ch = pi->chan[gchan];
-    if (!ch || ch->state != UP) {
-       if (cxt1e1_log_level > LOG_ERROR)
-           pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
-                   pi->up->devname, gchan);
-       return;
-    }
-    if (!ch->mdr)
-       return;                     /* can this happen ? */
-
-    for (;;) {
-       FLUSH_MEM_READ();
-       md = &ch->mdr[ch->rxix_irq_srv];
-       status = le32_to_cpu(md->status);
-       if (!(status & HOST_RX_OWNED))
-           break;                  /* Not our mdesc, done */
-       m = md->mem_token;
-       error = (status >> 16) & 0xf;
-       if (error == 0) {
+       mch_t      *ch;
+       void       *m, *m2;
+       struct mdesc *md;
+       volatile u_int32_t status;
+       u_int32_t   error;
+
+       ch = pi->chan[gchan];
+       if (!ch || ch->state != UP) {
+               if (cxt1e1_log_level > LOG_ERROR)
+                       pr_info("%s: intr: receive EOM on uninitialized channel %d\n",
+                               pi->up->devname, gchan);
+               return;
+       }
+       if (!ch->mdr)
+               return;                     /* can this happen ? */
+
+       for (;;) {
+               FLUSH_MEM_READ();
+               md = &ch->mdr[ch->rxix_irq_srv];
+               status = le32_to_cpu(md->status);
+               if (!(status & HOST_RX_OWNED))
+                       break;                  /* Not our mdesc, done */
+               m = md->mem_token;
+               error = (status >> 16) & 0xf;
+               if (error == 0) {
 #ifdef CONFIG_SBE_WAN256T3_NCOMM
-           int         hdlcnum = (pi->portnum * 32 + gchan);
-
-           /*
-            * if the packet number belongs to NCOMM, then send it to the TMS
-            * driver
-            */
-           if (hdlcnum >= 228) {
-               if (nciProcess_RX_packet)
-                   (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
-           } else
+                       int         hdlcnum = (pi->portnum * 32 + gchan);
+
+                       /*
+                        * if the packet number belongs to NCOMM, then send it to the TMS
+                        * driver
+                        */
+                       if (hdlcnum >= 228) {
+                               if (nciProcess_RX_packet)
+                                       (*nciProcess_RX_packet) (hdlcnum, status & 0x3fff, m, ch->user);
+                       } else
 #endif                              /*** CONFIG_SBE_WAN256T3_NCOMM ***/
 
-           {
-               m2 = OS_mem_token_alloc(cxt1e1_max_mru);
-               if (m2) {
-                       /* substitute the mbuf+cluster */
-                       md->mem_token = m2;
-                       md->data = cpu_to_le32(OS_vtophys(
-                               OS_mem_token_data(m2)));
-
-                       /* pass the received mbuf upward */
-                       sd_recv_consume(m, status & LENGTH_MASK, ch->user);
-                       ch->s.rx_packets++;
-                       ch->s.rx_bytes += status & LENGTH_MASK;
-               } else
-                       ch->s.rx_dropped++;
-           }
-       } else if (error == ERR_FCS)
-           ch->s.rx_crc_errors++;
-       else if (error == ERR_ALIGN)
-           ch->s.rx_missed_errors++;
-       else if (error == ERR_ABT)
-           ch->s.rx_missed_errors++;
-       else if (error == ERR_LNG)
-           ch->s.rx_length_errors++;
-       else if (error == ERR_SHT)
-           ch->s.rx_length_errors++;
-       FLUSH_MEM_WRITE();
-              status = cxt1e1_max_mru;
-       if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
-           status |= EOBIRQ_ENABLE;
-       md->status = cpu_to_le32(status);
-
-       /* Check next mdesc in the ring */
-       if (++ch->rxix_irq_srv >= ch->rxd_num)
-           ch->rxix_irq_srv = 0;
-       FLUSH_MEM_WRITE();
-    }
+                       {
+                               m2 = OS_mem_token_alloc(cxt1e1_max_mru);
+                               if (m2) {
+                                       /* substitute the mbuf+cluster */
+                                       md->mem_token = m2;
+                                       md->data = cpu_to_le32(OS_vtophys(
+                                                              OS_mem_token_data(m2)));
+
+                                       /* pass the received mbuf upward */
+                                       sd_recv_consume(m, status & LENGTH_MASK, ch->user);
+                                       ch->s.rx_packets++;
+                                       ch->s.rx_bytes += status & LENGTH_MASK;
+                               } else
+                                       ch->s.rx_dropped++;
+                       }
+               } else if (error == ERR_FCS)
+                       ch->s.rx_crc_errors++;
+               else if (error == ERR_ALIGN)
+                       ch->s.rx_missed_errors++;
+               else if (error == ERR_ABT)
+                       ch->s.rx_missed_errors++;
+               else if (error == ERR_LNG)
+                       ch->s.rx_length_errors++;
+               else if (error == ERR_SHT)
+                       ch->s.rx_length_errors++;
+               FLUSH_MEM_WRITE();
+               status = cxt1e1_max_mru;
+               if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
+                       status |= EOBIRQ_ENABLE;
+               md->status = cpu_to_le32(status);
+
+               /* Check next mdesc in the ring */
+               if (++ch->rxix_irq_srv >= ch->rxd_num)
+                       ch->rxix_irq_srv = 0;
+               FLUSH_MEM_WRITE();
+       }
 }
 
 
 irqreturn_t
 musycc_intr_th_handler(void *devp)
 {
-    ci_t       *ci = (ci_t *) devp;
-    volatile u_int32_t status, currInt = 0;
-    u_int32_t   nextInt, intCnt;
-
-    /*
-     * Hardware not available, potential interrupt hang.  But since interrupt
-     * might be shared, just return.
-     */
-    if (ci->state == C_INIT)
-       return IRQ_NONE;
-    /*
-     * Marked as hardware available. Don't service interrupts, just clear the
-     * event.
-     */
-
-    if (ci->state == C_IDLE) {
-       status = pci_read_32((u_int32_t *) &ci->reg->isd);
+       ci_t       *ci = (ci_t *) devp;
+       volatile u_int32_t status, currInt = 0;
+       u_int32_t   nextInt, intCnt;
 
-       /* clear the interrupt but process nothing else */
-       pci_write_32((u_int32_t *) &ci->reg->isd, status);
-       return IRQ_HANDLED;
-    }
-    FLUSH_PCI_READ();
-    FLUSH_MEM_READ();
-
-    status = pci_read_32((u_int32_t *) &ci->reg->isd);
-    nextInt = INTRPTS_NEXTINT(status);
-    intCnt = INTRPTS_INTCNT(status);
-    ci->intlog.drvr_intr_thcount++;
-
-    /*********************************************************/
-    /* HW Bug Fix                                            */
-    /* ----------                                            */
-    /* Under certain PCI Bus loading conditions, the         */
-    /* MUSYCC looses the data associated with an update      */
-    /* of its ISD and erroneously returns the immediately    */
-    /* preceding 'nextInt' value.  However, the 'intCnt'     */
-    /* value appears to be correct.  By not starting service */
-    /* where the 'missing' 'nextInt' SHOULD point causes     */
-    /* the IQD not to be serviced - the 'not serviced'       */
-    /* entries then remain and continue to increase as more  */
-    /* incorrect ISD's are encountered.                      */
-    /*********************************************************/
-
-    if (nextInt != INTRPTS_NEXTINT(ci->intlog.this_status_new)) {
-       if (cxt1e1_log_level >= LOG_MONITOR) {
-           pr_info("%s: note - updated ISD from %08x to %08x\n",
-                   ci->devname, status,
-             (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
-       }
        /*
-        * Replace bogus status with software corrected value.
-        *
-        * It's not known whether, during this problem occurrence, if the
-        * INTFULL bit is correctly reported or not.
+        * Hardware not available, potential interrupt hang.  But since interrupt
+        * might be shared, just return.
         */
-       status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new);
-       nextInt = INTRPTS_NEXTINT(status);
-    }
-    /**********************************************/
-    /* Cn847x Bug Fix                             */
-    /* --------------                             */
-    /* Fix for inability to write back same index */
-    /* as read for a full interrupt queue.        */
-    /**********************************************/
-
-    if (intCnt == INT_QUEUE_SIZE)
-       currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
-    else
-       /************************************************/
-       /* Interrupt Write Location Issues              */
-       /* -------------------------------              */
-       /* When the interrupt status descriptor is      */
-       /* written, the interrupt line is de-asserted   */
-       /* by the Cn847x.  In the case of MIPS          */
-       /* microprocessors, this must occur at the      */
-       /* beginning of the interrupt handler so that   */
-       /* the interrupt handle is not re-entered due   */
-       /* to interrupt dis-assertion latency.          */
-       /* In the case of all other processors, this    */
-       /* action should occur at the end of the        */
-       /* interrupt handler to avoid overwriting the   */
-       /* interrupt queue.                             */
-       /************************************************/
-
-    if (intCnt)
-       currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
-    else {
+       if (ci->state == C_INIT)
+               return IRQ_NONE;
        /*
-        * NOTE: Servicing an interrupt whose ISD contains a count of ZERO
-        * can be indicative of a Shared Interrupt chain.  Our driver can be
-        * called from the system's interrupt handler as a matter of the OS
-        * walking the chain.  As the chain is walked, the interrupt will
-        * eventually be serviced by the correct driver/handler.
+        * Marked as hardware available. Don't service interrupts, just clear the
+        * event.
         */
+
+       if (ci->state == C_IDLE) {
+               status = pci_read_32((u_int32_t *) &ci->reg->isd);
+
+               /* clear the interrupt but process nothing else */
+               pci_write_32((u_int32_t *) &ci->reg->isd, status);
+               return IRQ_HANDLED;
+       }
+       FLUSH_PCI_READ();
+       FLUSH_MEM_READ();
+
+       status = pci_read_32((u_int32_t *) &ci->reg->isd);
+       nextInt = INTRPTS_NEXTINT(status);
+       intCnt = INTRPTS_INTCNT(status);
+       ci->intlog.drvr_intr_thcount++;
+
+       /*********************************************************/
+       /* HW Bug Fix                                            */
+       /* ----------                                            */
+       /* Under certain PCI Bus loading conditions, the         */
+       /* MUSYCC looses the data associated with an update      */
+       /* of its ISD and erroneously returns the immediately    */
+       /* preceding 'nextInt' value.  However, the 'intCnt'     */
+       /* value appears to be correct.  By not starting service */
+       /* where the 'missing' 'nextInt' SHOULD point causes     */
+       /* the IQD not to be serviced - the 'not serviced'       */
+       /* entries then remain and continue to increase as more  */
+       /* incorrect ISD's are encountered.                      */
+       /*********************************************************/
+
+       if (nextInt != INTRPTS_NEXTINT(ci->intlog.this_status_new)) {
+               if (cxt1e1_log_level >= LOG_MONITOR) {
+                       pr_info("%s: note - updated ISD from %08x to %08x\n",
+                               ci->devname, status,
+                               (status & (~INTRPTS_NEXTINT_M)) | ci->intlog.this_status_new);
+               }
+               /*
+                * Replace bogus status with software corrected value.
+                *
+                * It's not known whether, during this problem occurrence, if the
+                * INTFULL bit is correctly reported or not.
+                */
+               status = (status & (~INTRPTS_NEXTINT_M)) | (ci->intlog.this_status_new);
+               nextInt = INTRPTS_NEXTINT(status);
+       }
+       /**********************************************/
+       /* Cn847x Bug Fix                             */
+       /* --------------                             */
+       /* Fix for inability to write back same index */
+       /* as read for a full interrupt queue.        */
+       /**********************************************/
+
+       if (intCnt == INT_QUEUE_SIZE)
+               currInt = ((intCnt - 1) + nextInt) & (INT_QUEUE_SIZE - 1);
+       else
+               /************************************************/
+               /* Interrupt Write Location Issues              */
+               /* -------------------------------              */
+               /* When the interrupt status descriptor is      */
+               /* written, the interrupt line is de-asserted   */
+               /* by the Cn847x.  In the case of MIPS          */
+               /* microprocessors, this must occur at the      */
+               /* beginning of the interrupt handler so that   */
+               /* the interrupt handle is not re-entered due   */
+               /* to interrupt dis-assertion latency.          */
+               /* In the case of all other processors, this    */
+               /* action should occur at the end of the        */
+               /* interrupt handler to avoid overwriting the   */
+               /* interrupt queue.                             */
+               /************************************************/
+
+               if (intCnt)
+                       currInt = (intCnt + nextInt) & (INT_QUEUE_SIZE - 1);
+               else {
+                       /*
+                        * NOTE: Servicing an interrupt whose ISD contains a count of ZERO
+                        * can be indicative of a Shared Interrupt chain.  Our driver can be
+                        * called from the system's interrupt handler as a matter of the OS
+                        * walking the chain.  As the chain is walked, the interrupt will
+                        * eventually be serviced by the correct driver/handler.
+                        */
 #if 0
-       /* chained interrupt = not ours */
-       pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n",
-               ci->devname, status);
+                       /* chained interrupt = not ours */
+                       pr_info(">> %s: intCnt NULL, sts %x, possibly a chained interrupt!\n",
+                                       ci->devname, status);
 #endif
-       return IRQ_NONE;
-    }
+                       return IRQ_NONE;
+               }
 
-    ci->iqp_tailx = currInt;
+       ci->iqp_tailx = currInt;
 
-    currInt <<= INTRPTS_NEXTINT_S;
-    ci->intlog.last_status_new = ci->intlog.this_status_new;
-    ci->intlog.this_status_new = currInt;
+       currInt <<= INTRPTS_NEXTINT_S;
+       ci->intlog.last_status_new = ci->intlog.this_status_new;
+       ci->intlog.this_status_new = currInt;
 
-    if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M))
-       pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
-    if (cxt1e1_log_level >= LOG_DEBUG)
-       pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
-               ci->devname, &ci->reg->isd,
-       status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1));
+       if ((cxt1e1_log_level >= LOG_WARN) && (status & INTRPTS_INTFULL_M))
+               pr_info("%s: Interrupt queue full condition occurred\n", ci->devname);
+       if (cxt1e1_log_level >= LOG_DEBUG)
+               pr_info("%s: interrupts pending, isd @ 0x%p: %x curr %d cnt %d NEXT %d\n",
+                       ci->devname, &ci->reg->isd,
+                       status, nextInt, intCnt, (intCnt + nextInt) & (INT_QUEUE_SIZE - 1));
 
-    FLUSH_MEM_WRITE();
+       FLUSH_MEM_WRITE();
 #if defined(SBE_ISR_TASKLET)
-    pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
-    atomic_inc(&ci->bh_pending);
-    tasklet_schedule(&ci->ci_musycc_isr_tasklet);
+       pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
+       atomic_inc(&ci->bh_pending);
+       tasklet_schedule(&ci->ci_musycc_isr_tasklet);
 #elif defined(SBE_ISR_IMMEDIATE)
-    pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
-    atomic_inc(&ci->bh_pending);
-    queue_task(&ci->ci_musycc_isr_tq, &tq_immediate);
-    mark_bh(IMMEDIATE_BH);
+       pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
+       atomic_inc(&ci->bh_pending);
+       queue_task(&ci->ci_musycc_isr_tq, &tq_immediate);
+       mark_bh(IMMEDIATE_BH);
 #elif defined(SBE_ISR_INLINE)
-    (void) musycc_intr_bh_tasklet(ci);
-    pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
+       (void) musycc_intr_bh_tasklet(ci);
+       pci_write_32((u_int32_t *) &ci->reg->isd, currInt);
 #endif
-    return IRQ_HANDLED;
+       return IRQ_HANDLED;
 }
 
 
@@ -1228,368 +1227,368 @@ void
 #endif
 musycc_intr_bh_tasklet(ci_t *ci)
 {
-    mpi_t      *pi;
-    mch_t      *ch;
-    unsigned int intCnt;
-    volatile u_int32_t currInt = 0;
-    volatile unsigned int headx, tailx;
-    int         readCount, loopCount;
-    int         group, gchan, event, err, tx;
-    u_int32_t   badInt = INT_EMPTY_ENTRY;
-    u_int32_t   badInt2 = INT_EMPTY_ENTRY2;
-
-    /*
-     * Hardware not available, potential interrupt hang.  But since interrupt
-     * might be shared, just return.
-     */
-    if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) {
+       mpi_t      *pi;
+       mch_t      *ch;
+       unsigned int intCnt;
+       volatile u_int32_t currInt = 0;
+       volatile unsigned int headx, tailx;
+       int         readCount, loopCount;
+       int         group, gchan, event, err, tx;
+       u_int32_t   badInt = INT_EMPTY_ENTRY;
+       u_int32_t   badInt2 = INT_EMPTY_ENTRY2;
+
+       /*
+        * Hardware not available, potential interrupt hang.  But since interrupt
+        * might be shared, just return.
+        */
+       if ((drvr_state != SBE_DRVR_AVAILABLE) || (ci->state == C_INIT)) {
 #if defined(SBE_ISR_IMMEDIATE)
-       return 0L;
+               return 0L;
 #else
-       return;
+               return;
 #endif
-    }
+       }
 #if defined(SBE_ISR_TASKLET) || defined(SBE_ISR_IMMEDIATE)
-    if (drvr_state != SBE_DRVR_AVAILABLE) {
+       if (drvr_state != SBE_DRVR_AVAILABLE) {
 #if defined(SBE_ISR_TASKLET)
-       return;
+               return;
 #elif defined(SBE_ISR_IMMEDIATE)
-       return 0L;
+               return 0L;
 #endif
-    }
+       }
 #elif defined(SBE_ISR_INLINE)
-    /* no semaphore taken, no double checks */
+       /* no semaphore taken, no double checks */
 #endif
 
-    ci->intlog.drvr_intr_bhcount++;
-    FLUSH_MEM_READ();
-    {
-       unsigned int bh = atomic_read(&ci->bh_pending);
-
-       max_bh = max(bh, max_bh);
-    }
-    atomic_set(&ci->bh_pending, 0);/* if here, no longer pending */
-    while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) {
-       intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
-       currInt = le32_to_cpu(ci->iqd_p[headx]);
-
-       max_intcnt = max(intCnt, max_intcnt);  /* RLD DEBUG */
-
-       /**************************************************/
-       /* HW Bug Fix                                     */
-       /* ----------                                     */
-       /* The following code checks for the condition    */
-       /* of interrupt assertion before interrupt        */
-       /* queue update.  This is a problem on several    */
-       /* PCI-Local bridge chips found on some products. */
-       /**************************************************/
+       ci->intlog.drvr_intr_bhcount++;
+       FLUSH_MEM_READ();
+       {
+               unsigned int bh = atomic_read(&ci->bh_pending);
 
-       readCount = 0;
-       if ((currInt == badInt) || (currInt == badInt2))
-           ci->intlog.drvr_int_failure++;
-
-       while ((currInt == badInt) || (currInt == badInt2)) {
-           for (loopCount = 0; loopCount < 0x30; loopCount++)
-               OS_uwait_dummy();  /* use call to avoid optimization removal
-                                    * of dummy delay */
-           FLUSH_MEM_READ();
-           currInt = le32_to_cpu(ci->iqd_p[headx]);
-           if (readCount++ > 20)
-               break;
+               max_bh = max(bh, max_bh);
        }
+       atomic_set(&ci->bh_pending, 0);/* if here, no longer pending */
+       while ((headx = ci->iqp_headx) != (tailx = ci->iqp_tailx)) {
+               intCnt = (tailx >= headx) ? (tailx - headx) : (tailx - headx + INT_QUEUE_SIZE);
+               currInt = le32_to_cpu(ci->iqd_p[headx]);
+
+               max_intcnt = max(intCnt, max_intcnt);  /* RLD DEBUG */
+
+               /**************************************************/
+               /* HW Bug Fix                                     */
+               /* ----------                                     */
+               /* The following code checks for the condition    */
+               /* of interrupt assertion before interrupt        */
+               /* queue update.  This is a problem on several    */
+               /* PCI-Local bridge chips found on some products. */
+               /**************************************************/
+
+               readCount = 0;
+               if ((currInt == badInt) || (currInt == badInt2))
+                       ci->intlog.drvr_int_failure++;
+
+               while ((currInt == badInt) || (currInt == badInt2)) {
+                       for (loopCount = 0; loopCount < 0x30; loopCount++)
+                               OS_uwait_dummy();  /* use call to avoid optimization removal
+                                                   * of dummy delay */
+                       FLUSH_MEM_READ();
+                       currInt = le32_to_cpu(ci->iqd_p[headx]);
+                       if (readCount++ > 20)
+                               break;
+               }
 
-       if ((currInt == badInt) || (currInt == badInt2)) {      /* catch failure of Bug
-                                                                * Fix checking */
-           if (cxt1e1_log_level >= LOG_WARN)
-               pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
-                       ci->devname, &ci->iqd_p[headx], headx);
-
-           /*
-            * If the descriptor has not recovered, then leaving the EMPTY
-            * entry set will not signal to the MUSYCC that this descriptor
-            * has been serviced. The Interrupt Queue can then start losing
-            * available descriptors and MUSYCC eventually encounters and
-            * reports the INTFULL condition.  Per manual, changing any bit
-            * marks descriptor as available, thus the use of different
-            * EMPTY_ENTRY values.
-            */
-
-           if (currInt == badInt)
-               ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY2);
-           else
-               ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
-           ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
-           FLUSH_MEM_WRITE();
-           FLUSH_MEM_READ();
-           continue;
-       }
-       group = INTRPT_GRP(currInt);
-       gchan = INTRPT_CH(currInt);
-       event = INTRPT_EVENT(currInt);
-       err = INTRPT_ERROR(currInt);
-       tx = currInt & INTRPT_DIR_M;
+               if ((currInt == badInt) || (currInt == badInt2)) {      /* catch failure of Bug
+                                                                        * Fix checking */
+                       if (cxt1e1_log_level >= LOG_WARN)
+                               pr_info("%s: Illegal Interrupt Detected @ 0x%p, mod %d.)\n",
+                                       ci->devname, &ci->iqd_p[headx], headx);
+
+                       /*
+                        * If the descriptor has not recovered, then leaving the EMPTY
+                        * entry set will not signal to the MUSYCC that this descriptor
+                        * has been serviced. The Interrupt Queue can then start losing
+                        * available descriptors and MUSYCC eventually encounters and
+                        * reports the INTFULL condition.  Per manual, changing any bit
+                        * marks descriptor as available, thus the use of different
+                        * EMPTY_ENTRY values.
+                        */
+
+                       if (currInt == badInt)
+                               ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY2);
+                       else
+                               ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
+                       ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1); /* insure wrapness */
+                       FLUSH_MEM_WRITE();
+                       FLUSH_MEM_READ();
+                       continue;
+               }
+               group = INTRPT_GRP(currInt);
+               gchan = INTRPT_CH(currInt);
+               event = INTRPT_EVENT(currInt);
+               err = INTRPT_ERROR(currInt);
+               tx = currInt & INTRPT_DIR_M;
 
-       ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
-       FLUSH_MEM_WRITE();
+               ci->iqd_p[headx] = __constant_cpu_to_le32(INT_EMPTY_ENTRY);
+               FLUSH_MEM_WRITE();
 
-       if (cxt1e1_log_level >= LOG_DEBUG) {
-           if (err != 0)
-               pr_info(" %08x -> err: %2d,", currInt, err);
+               if (cxt1e1_log_level >= LOG_DEBUG) {
+                       if (err != 0)
+                               pr_info(" %08x -> err: %2d,", currInt, err);
 
-           pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n",
-                   event, group, gchan, tx ? 'T' : 'R');
-       }
-       pi = &ci->port[group];      /* notice that here we assume 1-1 group -
-                                    * port mapping */
-       ch = pi->chan[gchan];
-       switch (event) {
-       case EVE_SACK:              /* Service Request Acknowledge */
-           if (cxt1e1_log_level >= LOG_DEBUG) {
-               volatile u_int32_t r;
-
-               r = pci_read_32((u_int32_t *) &pi->reg->srd);
-               pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r);
-           }
-           SD_SEM_GIVE(&pi->sr_sem_wait);     /* wake up waiting process */
-           break;
-       case EVE_CHABT:     /* Change To Abort Code (0x7e -> 0xff) */
-       case EVE_CHIC:              /* Change To Idle Code (0xff -> 0x7e) */
-           break;
-       case EVE_EOM:               /* End Of Message */
-       case EVE_EOB:               /* End Of Buffer (Transparent mode) */
-           if (tx)
-               musycc_bh_tx_eom(pi, gchan);
-           else
-               musycc_bh_rx_eom(pi, gchan);
+                       pr_info("+ interrupt event: %d, grp: %d, chan: %2d, side: %cX\n",
+                               event, group, gchan, tx ? 'T' : 'R');
+               }
+               pi = &ci->port[group];      /* notice that here we assume 1-1 group -
+                                            * port mapping */
+               ch = pi->chan[gchan];
+               switch (event) {
+               case EVE_SACK:              /* Service Request Acknowledge */
+                       if (cxt1e1_log_level >= LOG_DEBUG) {
+                               volatile u_int32_t r;
+
+                               r = pci_read_32((u_int32_t *) &pi->reg->srd);
+                               pr_info("- SACK cmd: %08x (hdw= %08x)\n", pi->sr_last, r);
+                       }
+                       SD_SEM_GIVE(&pi->sr_sem_wait);     /* wake up waiting process */
+                       break;
+               case EVE_CHABT:     /* Change To Abort Code (0x7e -> 0xff) */
+               case EVE_CHIC:              /* Change To Idle Code (0xff -> 0x7e) */
+                       break;
+               case EVE_EOM:               /* End Of Message */
+               case EVE_EOB:               /* End Of Buffer (Transparent mode) */
+                       if (tx)
+                               musycc_bh_tx_eom(pi, gchan);
+                       else
+                               musycc_bh_rx_eom(pi, gchan);
 #if 0
-           break;
+                       break;
 #else
-           /*
-            * MUSYCC Interrupt Descriptor section states that EOB and EOM
-            * can be combined with the NONE error (as well as others).  So
-            * drop thru to catch this...
-            */
+                       /*
+                        * MUSYCC Interrupt Descriptor section states that EOB and EOM
+                        * can be combined with the NONE error (as well as others).  So
+                        * drop thru to catch this...
+                        */
 #endif
-       case EVE_NONE:
-           if (err == ERR_SHT)
-               ch->s.rx_length_errors++;
-           break;
-       default:
-           if (cxt1e1_log_level >= LOG_WARN)
-               pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname,
-                       event, headx, currInt, group);
-           break;
-       }                           /* switch on event */
-
+               case EVE_NONE:
+                       if (err == ERR_SHT)
+                               ch->s.rx_length_errors++;
+                       break;
+               default:
+                       if (cxt1e1_log_level >= LOG_WARN)
+                               pr_info("%s: unexpected interrupt event: %d, iqd[%d]: %08x, port: %d\n", ci->devname,
+                                       event, headx, currInt, group);
+                       break;
+               }                           /* switch on event */
 
-       /*
-        * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors
-        * are service-affecting and require action to resume normal
-        * bit-level processing.
-        */
-
-       switch (err) {
-       case ERR_ONR:
-           /*
-            * Per MUSYCC manual, Section  6.4.8.3 [Transmit Errors], this
-            * error requires Transmit channel reactivation.
-            *
-            * Per MUSYCC manual, Section  6.4.8.4 [Receive Errors], this error
-            * requires Receive channel reactivation.
-            */
-           if (tx) {
-
-               /*
-                * TX ONR Error only occurs when channel is configured for
-                * Transparent Mode.  However, this code will catch and
-                * re-activate on ANY TX ONR error.
-                */
 
                /*
-                * Set flag to re-enable on any next transmit attempt.
+                * Per MUSYCC Manual, Section 6.4.8.3 [Transmit Errors], TX errors
+                * are service-affecting and require action to resume normal
+                * bit-level processing.
                 */
-               ch->ch_start_tx = CH_START_TX_ONR;
 
-               {
+               switch (err) {
+               case ERR_ONR:
+                       /*
+                        * Per MUSYCC manual, Section  6.4.8.3 [Transmit Errors], this
+                        * error requires Transmit channel reactivation.
+                        *
+                        * Per MUSYCC manual, Section  6.4.8.4 [Receive Errors], this error
+                        * requires Receive channel reactivation.
+                        */
+                       if (tx) {
+
+                               /*
+                                * TX ONR Error only occurs when channel is configured for
+                                * Transparent Mode.  However, this code will catch and
+                                * re-activate on ANY TX ONR error.
+                                */
+
+                               /*
+                                * Set flag to re-enable on any next transmit attempt.
+                                */
+                               ch->ch_start_tx = CH_START_TX_ONR;
+
+                               {
 #ifdef RLD_TRANS_DEBUG
-                   if (1 || cxt1e1_log_level >= LOG_MONITOR)
+                                       if (1 || cxt1e1_log_level >= LOG_MONITOR)
 #else
-                   if (cxt1e1_log_level >= LOG_MONITOR)
+                                       if (cxt1e1_log_level >= LOG_MONITOR)
 #endif
-                   {
-                       pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
-                               ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped(ch->user), ch->txd_free);
+                                       {
+                                               pr_info("%s: TX buffer underflow [ONR] on channel %d, mode %x QStopped %x free %d\n",
+                                                       ci->devname, ch->channum, ch->p.chan_mode, sd_queue_stopped(ch->user), ch->txd_free);
 #ifdef RLD_DEBUG
-                       if (ch->p.chan_mode == 2) {     /* problem = ONR on HDLC
-                                                        * mode */
-                           pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
-                                   (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
-                                   sd_queue_stopped(ch->user),
-                                   ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
-                           musycc_dump_txbuffer_ring(ch, 0);
-                       }
+                                               if (ch->p.chan_mode == 2) {     /* problem = ONR on HDLC
+                                                                                * mode */
+                                                       pr_info("++ Failed Last %x Next %x QStopped %x, start_tx %x tx_full %d txd_free %d mode %x\n",
+                                                               (u_int32_t) ch->txd_irq_srv, (u_int32_t) ch->txd_usr_add,
+                                                               sd_queue_stopped(ch->user),
+                                                               ch->ch_start_tx, ch->tx_full, ch->txd_free, ch->p.chan_mode);
+                                                       musycc_dump_txbuffer_ring(ch, 0);
+                                               }
 #endif
-                   }
-               }
-           } else {                 /* RX buffer overrun */
-               /*
-                * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
-                * channel recovery for this RX ONR error IS required.  It is
-                * also suggested to increase the number of receive buffers
-                * for this channel.  Receive channel reactivation IS
-                * required, and data has been lost.
-                */
-               ch->s.rx_over_errors++;
-               ch->ch_start_rx = CH_START_RX_ONR;
+                                       }
+                               }
+                       } else {                 /* RX buffer overrun */
+                               /*
+                                * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors],
+                                * channel recovery for this RX ONR error IS required.  It is
+                                * also suggested to increase the number of receive buffers
+                                * for this channel.  Receive channel reactivation IS
+                                * required, and data has been lost.
+                                */
+                               ch->s.rx_over_errors++;
+                               ch->ch_start_rx = CH_START_RX_ONR;
+
+                               if (cxt1e1_log_level >= LOG_WARN) {
+                                       pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
+                                               ci->devname, ch->channum, ch->p.chan_mode);
+                                       //musycc_dump_rxbuffer_ring (ch, 0);        /* RLD DEBUG */
+                               }
+                       }
+                       musycc_chan_restart(ch);
+                       break;
+               case ERR_BUF:
+                       if (tx) {
+                               ch->s.tx_fifo_errors++;
+                               ch->ch_start_tx = CH_START_TX_BUF;
+                               /*
+                                * Per MUSYCC manual, Section  6.4.8.3 [Transmit Errors],
+                                * this BUFF error requires Transmit channel reactivation.
+                                */
+                               if (cxt1e1_log_level >= LOG_MONITOR)
+                                       pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
+                                               ci->devname, ch->channum, ch->p.chan_mode);
+                       } else {                 /* RX buffer overrun */
+                               ch->s.rx_over_errors++;
+                               /*
+                                * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
+                                * mode requires NO recovery for this RX BUFF error is
+                                * required.  It is suggested to increase the FIFO buffer
+                                * space for this channel.  Receive channel reactivation is
+                                * not required, but data has been lost.
+                                */
+                               if (cxt1e1_log_level >= LOG_WARN)
+                                       pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n",
+                                               ci->devname, ch->channum, ch->p.chan_mode);
+                               /*
+                                * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors],
+                                * Transparent mode DOES require recovery for the RX BUFF
+                                * error.  It is suggested to increase the FIFO buffer space
+                                * for this channel.  Receive channel reactivation IS
+                                * required and data has been lost.
+                                */
+                               if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
+                                       ch->ch_start_rx = CH_START_RX_BUF;
+                       }
 
-               if (cxt1e1_log_level >= LOG_WARN) {
-                   pr_info("%s: RX buffer overflow [ONR] on channel %d, mode %x\n",
-                           ci->devname, ch->channum, ch->p.chan_mode);
-                   //musycc_dump_rxbuffer_ring (ch, 0);        /* RLD DEBUG */
-               }
-           }
-           musycc_chan_restart(ch);
-           break;
-       case ERR_BUF:
-           if (tx) {
-               ch->s.tx_fifo_errors++;
-               ch->ch_start_tx = CH_START_TX_BUF;
-               /*
-                * Per MUSYCC manual, Section  6.4.8.3 [Transmit Errors],
-                * this BUFF error requires Transmit channel reactivation.
-                */
-               if (cxt1e1_log_level >= LOG_MONITOR)
-                   pr_info("%s: TX buffer underrun [BUFF] on channel %d, mode %x\n",
-                           ci->devname, ch->channum, ch->p.chan_mode);
-           } else {                 /* RX buffer overrun */
-               ch->s.rx_over_errors++;
-               /*
-                * Per MUSYCC manual, Section 6.4.8.4 [Receive Errors], HDLC
-                * mode requires NO recovery for this RX BUFF error is
-                * required.  It is suggested to increase the FIFO buffer
-                * space for this channel.  Receive channel reactivation is
-                * not required, but data has been lost.
-                */
-               if (cxt1e1_log_level >= LOG_WARN)
-                   pr_info("%s: RX buffer overrun [BUFF] on channel %d, mode %x\n",
-                           ci->devname, ch->channum, ch->p.chan_mode);
-               /*
-                * Per MUSYCC manual, Section 6.4.9.4 [Receive Errors],
-                * Transparent mode DOES require recovery for the RX BUFF
-                * error.  It is suggested to increase the FIFO buffer space
-                * for this channel.  Receive channel reactivation IS
-                * required and data has been lost.
-                */
-               if (ch->p.chan_mode == CFG_CH_PROTO_TRANS)
-                   ch->ch_start_rx = CH_START_RX_BUF;
-           }
+                       if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
+                               musycc_chan_restart(ch);
+                       break;
+               default:
+                       break;
+               }                           /* switch on err */
+
+               /* Check for interrupt lost condition */
+               if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
+                       pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
+                               ci->devname);
+               ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1);     /* insure wrapness */
+               FLUSH_MEM_WRITE();
+               FLUSH_MEM_READ();
+       }                               /* while */
+       if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) {
+               int         bh;
 
-           if (tx || (ch->p.chan_mode == CFG_CH_PROTO_TRANS))
-               musycc_chan_restart(ch);
-           break;
-       default:
-           break;
-       }                           /* switch on err */
-
-       /* Check for interrupt lost condition */
-       if ((currInt & INTRPT_ILOST_M) && (cxt1e1_log_level >= LOG_ERROR))
-           pr_info("%s: Interrupt queue overflow - ILOST asserted\n",
-                   ci->devname);
-       ci->iqp_headx = (headx + 1) & (INT_QUEUE_SIZE - 1);     /* insure wrapness */
-       FLUSH_MEM_WRITE();
-       FLUSH_MEM_READ();
-    }                               /* while */
-    if ((cxt1e1_log_level >= LOG_MONITOR2) && (ci->iqp_headx != ci->iqp_tailx)) {
-       int         bh;
-
-       bh = atomic_read(&CI->bh_pending);
-       pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n",
-               ci->iqp_headx, ci->iqp_tailx, bh);
-    }
+               bh = atomic_read(&CI->bh_pending);
+               pr_info("_bh_: late arrivals, head %d != tail %d, pending %d\n",
+                       ci->iqp_headx, ci->iqp_tailx, bh);
+       }
 #if defined(SBE_ISR_IMMEDIATE)
-    return 0L;
+       return 0L;
 #endif
-    /* else, nothing returned */
+       /* else, nothing returned */
 }
 
 #if 0
-int         __init
+       int         __init
 musycc_new_chan(ci_t *ci, int channum, void *user)
 {
-    mch_t      *ch;
+       mch_t      *ch;
 
-    ch = ci->port[channum / MUSYCC_NCHANS].chan[channum % MUSYCC_NCHANS];
+       ch = ci->port[channum / MUSYCC_NCHANS].chan[channum % MUSYCC_NCHANS];
 
-    if (ch->state != UNASSIGNED)
-       return EEXIST;
-    /* NOTE: mch_t already cleared during OS_kmalloc() */
-    ch->state = DOWN;
-    ch->user = user;
+       if (ch->state != UNASSIGNED)
+               return EEXIST;
+       /* NOTE: mch_t already cleared during OS_kmalloc() */
+       ch->state = DOWN;
+       ch->user = user;
 #if 0
-    ch->status = 0;
-    ch->p.status = 0;
-    ch->p.intr_mask = 0;
+       ch->status = 0;
+       ch->p.status = 0;
+       ch->p.intr_mask = 0;
 #endif
-    ch->p.chan_mode = CFG_CH_PROTO_HDLC_FCS16;
-    ch->p.idlecode = CFG_CH_FLAG_7E;
-    ch->p.pad_fill_count = 2;
-    spin_lock_init(&ch->ch_rxlock);
-    spin_lock_init(&ch->ch_txlock);
+       ch->p.chan_mode = CFG_CH_PROTO_HDLC_FCS16;
+       ch->p.idlecode = CFG_CH_FLAG_7E;
+       ch->p.pad_fill_count = 2;
+       spin_lock_init(&ch->ch_rxlock);
+       spin_lock_init(&ch->ch_txlock);
 
-    return 0;
+       return 0;
 }
 #endif
 
 
 #ifdef SBE_PMCC4_ENABLE
-status_t
+       status_t
 musycc_chan_down(ci_t *dummy, int channum)
 {
-    mpi_t      *pi;
-    mch_t      *ch;
-    int         i, gchan;
-
-    ch = sd_find_chan(dummy, channum);
-    if (!ch)
-       return -EINVAL;
-    pi = ch->up;
-    gchan = ch->gchan;
-
-    /* Deactivate the channel */
-    musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
-    ch->ch_start_rx = 0;
-    musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
-    ch->ch_start_tx = 0;
-
-    if (ch->state == DOWN)
+       mpi_t      *pi;
+       mch_t      *ch;
+       int         i, gchan;
+
+       ch = sd_find_chan(dummy, channum);
+       if (!ch)
+               return -EINVAL;
+       pi = ch->up;
+       gchan = ch->gchan;
+
+       /* Deactivate the channel */
+       musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_RX_DIRECTION | gchan);
+       ch->ch_start_rx = 0;
+       musycc_serv_req(pi, SR_CHANNEL_DEACTIVATE | SR_TX_DIRECTION | gchan);
+       ch->ch_start_tx = 0;
+
+       if (ch->state == DOWN)
+               return 0;
+       ch->state = DOWN;
+
+       pi->regram->thp[gchan] = 0;
+       pi->regram->tmp[gchan] = 0;
+       pi->regram->rhp[gchan] = 0;
+       pi->regram->rmp[gchan] = 0;
+       FLUSH_MEM_WRITE();
+       for (i = 0; i < ch->txd_num; i++)
+               if (ch->mdt[i].mem_token)
+                       OS_mem_token_free(ch->mdt[i].mem_token);
+
+       for (i = 0; i < ch->rxd_num; i++)
+               if (ch->mdr[i].mem_token)
+                       OS_mem_token_free(ch->mdr[i].mem_token);
+
+       kfree(ch->mdr);
+       ch->mdr = NULL;
+       ch->rxd_num = 0;
+       kfree(ch->mdt);
+       ch->mdt = NULL;
+       ch->txd_num = 0;
+
+       musycc_update_timeslots(pi);
+       c4_fifo_free(pi, ch->gchan);
+
+       pi->openchans--;
        return 0;
-    ch->state = DOWN;
-
-    pi->regram->thp[gchan] = 0;
-    pi->regram->tmp[gchan] = 0;
-    pi->regram->rhp[gchan] = 0;
-    pi->regram->rmp[gchan] = 0;
-    FLUSH_MEM_WRITE();
-    for (i = 0; i < ch->txd_num; i++)
-       if (ch->mdt[i].mem_token)
-           OS_mem_token_free(ch->mdt[i].mem_token);
-
-    for (i = 0; i < ch->rxd_num; i++)
-       if (ch->mdr[i].mem_token)
-           OS_mem_token_free(ch->mdr[i].mem_token);
-
-    kfree(ch->mdr);
-    ch->mdr = NULL;
-    ch->rxd_num = 0;
-    kfree(ch->mdt);
-    ch->mdt = NULL;
-    ch->txd_num = 0;
-
-    musycc_update_timeslots(pi);
-    c4_fifo_free(pi, ch->gchan);
-
-    pi->openchans--;
-    return 0;
 }
 #endif
 
@@ -1599,33 +1598,33 @@ musycc_chan_down(ci_t *dummy, int channum)
 int
 musycc_del_chan(ci_t *ci, int channum)
 {
-    mch_t      *ch;
-
-    if ((channum < 0) || (channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS)))  /* sanity chk param */
-       return ECHRNG;
-    ch = sd_find_chan(ci, channum);
-    if (!ch)
-       return ENOENT;
-    if (ch->state == UP)
-       musycc_chan_down(ci, channum);
-    ch->state = UNASSIGNED;
-    return 0;
+       mch_t      *ch;
+
+       if ((channum < 0) || (channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS)))  /* sanity chk param */
+               return ECHRNG;
+       ch = sd_find_chan(ci, channum);
+       if (!ch)
+               return ENOENT;
+       if (ch->state == UP)
+               musycc_chan_down(ci, channum);
+       ch->state = UNASSIGNED;
+       return 0;
 }
 
 
 int
 musycc_del_chan_stats(ci_t *ci, int channum)
 {
-    mch_t      *ch;
+       mch_t      *ch;
 
-    if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))      /* sanity chk param */
-       return ECHRNG;
-    ch = sd_find_chan(ci, channum);
-    if (!ch)
-       return ENOENT;
+       if (channum < 0 || channum >= (MUSYCC_NPORTS * MUSYCC_NCHANS))      /* sanity chk param */
+               return ECHRNG;
+       ch = sd_find_chan(ci, channum);
+       if (!ch)
+               return ENOENT;
 
-    memset(&ch->s, 0, sizeof(struct sbecom_chan_stats));
-    return 0;
+       memset(&ch->s, 0, sizeof(struct sbecom_chan_stats));
+       return 0;
 }
 #endif
 
@@ -1633,169 +1632,169 @@ musycc_del_chan_stats(ci_t *ci, int channum)
 int
 musycc_start_xmit(ci_t *ci, int channum, void *mem_token)
 {
-    mch_t      *ch;
-    struct mdesc *md;
-    void       *m2;
+       mch_t      *ch;
+       struct mdesc *md;
+       void       *m2;
 #if 0
-    unsigned long flags;
+       unsigned long flags;
 #endif
-    int         txd_need_cnt;
-    u_int32_t   len;
+       int         txd_need_cnt;
+       u_int32_t   len;
 
-    ch = sd_find_chan(ci, channum);
-    if (!ch)
-       return -ENOENT;
+       ch = sd_find_chan(ci, channum);
+       if (!ch)
+               return -ENOENT;
 
-    if (ci->state != C_RUNNING)     /* full interrupt processing available */
-       return -EINVAL;
-    if (ch->state != UP)
-       return -EINVAL;
+       if (ci->state != C_RUNNING)     /* full interrupt processing available */
+               return -EINVAL;
+       if (ch->state != UP)
+               return -EINVAL;
 
-    if (!(ch->status & TX_ENABLED))
-       return -EROFS;               /* how else to flag unwritable state ? */
+       if (!(ch->status & TX_ENABLED))
+               return -EROFS;               /* how else to flag unwritable state ? */
 
-#ifdef RLD_TRANS_DEBUGx
-    if (1 || cxt1e1_log_level >= LOG_MONITOR2)
+#ifdef RLD_TRANS_DEBUG
+       if (1 || cxt1e1_log_level >= LOG_MONITOR2)
 #else
-    if (cxt1e1_log_level >= LOG_MONITOR2)
-#endif
-    {
-       pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n",
-               channum, ch->state, ch->ch_start_tx, ch->tx_full,
-               ch->txd_free, ch->txd_required, sd_queue_stopped(ch->user));
-    }
-    /***********************************************/
-    /** Determine total amount of data to be sent **/
-    /***********************************************/
-    m2 = mem_token;
-    txd_need_cnt = 0;
-    for (len = OS_mem_token_tlen(m2); len > 0;
-        m2 = (void *) OS_mem_token_next(m2)) {
-       if (!OS_mem_token_len(m2))
-           continue;
-       txd_need_cnt++;
-       len -= OS_mem_token_len(m2);
-    }
-
-    if (txd_need_cnt == 0) {
        if (cxt1e1_log_level >= LOG_MONITOR2)
-           pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
-       OS_mem_token_free(mem_token);
-       return 0;                   /* no data to send */
-    }
-    /*************************************************/
-    /** Are there sufficient descriptors available? **/
-    /*************************************************/
-    if (txd_need_cnt > ch->txd_num) { /* never enough descriptors for this
-                                      * large a buffer */
-       if (cxt1e1_log_level >= LOG_DEBUG)
-           pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
-                   ch->txd_num, txd_need_cnt + 1);
-       ch->s.tx_dropped++;
-       OS_mem_token_free(mem_token);
-       return 0;
-    }
+#endif
+       {
+               pr_info("++ start_xmt[%d]: state %x start %x full %d free %d required %d stopped %x\n",
+                       channum, ch->state, ch->ch_start_tx, ch->tx_full,
+                       ch->txd_free, ch->txd_required, sd_queue_stopped(ch->user));
+       }
+       /***********************************************/
+       /** Determine total amount of data to be sent **/
+       /***********************************************/
+       m2 = mem_token;
+       txd_need_cnt = 0;
+       for (len = OS_mem_token_tlen(m2); len > 0;
+            m2 = (void *) OS_mem_token_next(m2)) {
+               if (!OS_mem_token_len(m2))
+                       continue;
+               txd_need_cnt++;
+               len -= OS_mem_token_len(m2);
+       }
+
+       if (txd_need_cnt == 0) {
+               if (cxt1e1_log_level >= LOG_MONITOR2)
+                       pr_info("%s channel %d: no TX data in User buffer\n", ci->devname, channum);
+               OS_mem_token_free(mem_token);
+               return 0;                   /* no data to send */
+       }
+       /*************************************************/
+       /** Are there sufficient descriptors available? **/
+       /*************************************************/
+       if (txd_need_cnt > ch->txd_num) { /* never enough descriptors for this
+                                          * large a buffer */
+               if (cxt1e1_log_level >= LOG_DEBUG)
+                       pr_info("start_xmit: discarding buffer, insufficient descriptor cnt %d, need %d.\n",
+                               ch->txd_num, txd_need_cnt + 1);
+               ch->s.tx_dropped++;
+               OS_mem_token_free(mem_token);
+               return 0;
+       }
 #if 0
-    spin_lock_irqsave(&ch->ch_txlock, flags);
+       spin_lock_irqsave(&ch->ch_txlock, flags);
 #endif
-    /************************************************************/
-    /** flow control the line if not enough descriptors remain **/
-    /************************************************************/
-    if (txd_need_cnt > ch->txd_free) {
-       if (cxt1e1_log_level >= LOG_MONITOR2)
-           pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
-                   channum, ch->txd_free, ch->txd_num, txd_need_cnt);
-       ch->tx_full = 1;
-       ch->txd_required = txd_need_cnt;
-       sd_disable_xmit(ch->user);
+       /************************************************************/
+       /** flow control the line if not enough descriptors remain **/
+       /************************************************************/
+       if (txd_need_cnt > ch->txd_free) {
+               if (cxt1e1_log_level >= LOG_MONITOR2)
+                       pr_info("start_xmit[%d]: EBUSY - need more descriptors, have %d of %d need %d\n",
+                               channum, ch->txd_free, ch->txd_num, txd_need_cnt);
+               ch->tx_full = 1;
+               ch->txd_required = txd_need_cnt;
+               sd_disable_xmit(ch->user);
 #if 0
-       spin_unlock_irqrestore(&ch->ch_txlock, flags);
+               spin_unlock_irqrestore(&ch->ch_txlock, flags);
 #endif
-       return -EBUSY;               /* tell user to try again later */
-    }
-    /**************************************************/
-    /** Put the user data into MUSYCC data buffer(s) **/
-    /**************************************************/
-    m2 = mem_token;
-    md = ch->txd_usr_add;           /* get current available descriptor */
+               return -EBUSY;               /* tell user to try again later */
+       }
+       /**************************************************/
+       /** Put the user data into MUSYCC data buffer(s) **/
+       /**************************************************/
+       m2 = mem_token;
+       md = ch->txd_usr_add;           /* get current available descriptor */
 
-    for (len = OS_mem_token_tlen(m2); len > 0; m2 = OS_mem_token_next(m2)) {
-       int         u = OS_mem_token_len(m2);
+       for (len = OS_mem_token_tlen(m2); len > 0; m2 = OS_mem_token_next(m2)) {
+               int         u = OS_mem_token_len(m2);
 
-       if (!u)
-           continue;
-       len -= u;
+               if (!u)
+                       continue;
+               len -= u;
 
-       /*
-        * Enable following chunks, yet wait to enable the FIRST chunk until
-        * after ALL subsequent chunks are setup.
-        */
-       if (md != ch->txd_usr_add)  /* not first chunk */
-           u |= MUSYCC_TX_OWNED;   /* transfer ownership from HOST to MUSYCC */
-
-       if (len)                    /* not last chunk */
-           u |= EOBIRQ_ENABLE;
-       else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) {
-           /*
-            * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
-            * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
-            * (IE. don't set herein).
-            */
-           u |= EOBIRQ_ENABLE;
-       } else
-           u |= EOMIRQ_ENABLE;     /* EOM, last HDLC chunk */
-
-
-       /* last chunk in hdlc mode */
-       u |= (ch->p.idlecode << IDLE_CODE);
-       if (ch->p.pad_fill_count) {
+               /*
+                * Enable following chunks, yet wait to enable the FIRST chunk until
+                * after ALL subsequent chunks are setup.
+                */
+               if (md != ch->txd_usr_add)  /* not first chunk */
+                       u |= MUSYCC_TX_OWNED;   /* transfer ownership from HOST to MUSYCC */
+
+               if (len)                    /* not last chunk */
+                       u |= EOBIRQ_ENABLE;
+               else if (ch->p.chan_mode == CFG_CH_PROTO_TRANS) {
+                       /*
+                        * Per MUSYCC Ref 6.4.9 for Transparent Mode, the host must
+                        * always clear EOMIRQ_ENABLE in every Transmit Buffer Descriptor
+                        * (IE. don't set herein).
+                        */
+                       u |= EOBIRQ_ENABLE;
+               } else
+                       u |= EOMIRQ_ENABLE;     /* EOM, last HDLC chunk */
+
+
+               /* last chunk in hdlc mode */
+               u |= (ch->p.idlecode << IDLE_CODE);
+               if (ch->p.pad_fill_count) {
 #if 0
-           /* NOOP NOTE: u_int8_t cannot be > 0xFF */
-           /* sanitize pad_fill_count for maximums allowed by hardware */
-           if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK)
-               ch->p.pad_fill_count = EXTRA_FLAGS_MASK;
+                       /* NOOP NOTE: u_int8_t cannot be > 0xFF */
+                       /* sanitize pad_fill_count for maximums allowed by hardware */
+                       if (ch->p.pad_fill_count > EXTRA_FLAGS_MASK)
+                               ch->p.pad_fill_count = EXTRA_FLAGS_MASK;
 #endif
-           u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
+                       u |= (PADFILL_ENABLE | (ch->p.pad_fill_count << EXTRA_FLAGS));
+               }
+               md->mem_token = len ? NULL : mem_token;    /* Fill in mds on last
+                                                           * segment, others set ZERO
+                                                           * so that entire token is
+                                                           * removed ONLY when ALL
+                                                           * segments have been
+                                                           * transmitted. */
+
+               md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
+               FLUSH_MEM_WRITE();
+               md->status = cpu_to_le32(u);
+               --ch->txd_free;
+               md = md->snext;
        }
-       md->mem_token = len ? NULL : mem_token;    /* Fill in mds on last
-                                                * segment, others set ZERO
-                                                * so that entire token is
-                                                * removed ONLY when ALL
-                                                * segments have been
-                                                * transmitted. */
-
-       md->data = cpu_to_le32(OS_vtophys(OS_mem_token_data(m2)));
        FLUSH_MEM_WRITE();
-       md->status = cpu_to_le32(u);
-       --ch->txd_free;
-       md = md->snext;
-    }
-    FLUSH_MEM_WRITE();
-
-
-    /*
-     * Now transfer ownership of first chunk from HOST to MUSYCC in order to
-     * fire-off this XMIT.
-     */
-    ch->txd_usr_add->status |= __constant_cpu_to_le32(MUSYCC_TX_OWNED);
-    FLUSH_MEM_WRITE();
-    ch->txd_usr_add = md;
-
-    len = OS_mem_token_tlen(mem_token);
-    atomic_add(len, &ch->tx_pending);
-    atomic_add(len, &ci->tx_pending);
-    ch->s.tx_packets++;
-    ch->s.tx_bytes += len;
-    /*
-     * If an ONR was seen, then channel requires poking to restart
-     * transmission.
-     */
-    if (ch->ch_start_tx)
-       musycc_chan_restart(ch);
+
+
+       /*
+        * Now transfer ownership of first chunk from HOST to MUSYCC in order to
+        * fire-off this XMIT.
+        */
+       ch->txd_usr_add->status |= __constant_cpu_to_le32(MUSYCC_TX_OWNED);
+       FLUSH_MEM_WRITE();
+       ch->txd_usr_add = md;
+
+       len = OS_mem_token_tlen(mem_token);
+       atomic_add(len, &ch->tx_pending);
+       atomic_add(len, &ci->tx_pending);
+       ch->s.tx_packets++;
+       ch->s.tx_bytes += len;
+       /*
+        * If an ONR was seen, then channel requires poking to restart
+        * transmission.
+        */
+       if (ch->ch_start_tx)
+               musycc_chan_restart(ch);
 #ifdef SBE_WAN256T3_ENABLE
-    wan256t3_led(ci, LED_TX, LEDV_G);
+       wan256t3_led(ci, LED_TX, LEDV_G);
 #endif
-    return 0;
+       return 0;
 }