hwmon: (ltc4151) Make shunt-resistor configurable

Allow to specify the resistance of the attached shunt via DT by
adding the shunt-resistor property. Fall-back to the previous
default (1 mOhm) if unset.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
[groeck: Fixed 'line over 80 columns' checkpatch warning]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

diff --git a/drivers/hwmon/ltc4151.c b/drivers/hwmon/ltc4151.c
index c86a184..8445c9f 100644 (file)
--- a/drivers/hwmon/ltc4151.c
+++ b/drivers/hwmon/ltc4151.c
@@ -30,6 +30,7 @@
 
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -52,6 +53,7 @@ struct ltc4151_data {
        struct mutex update_lock;
        bool valid;
        unsigned long last_updated; /* in jiffies */
+       unsigned int shunt; /* in micro ohms */
 
        /* Registers */
        u8 regs[6];
@@ -111,9 +113,9 @@ static int ltc4151_get_value(struct ltc4151_data *data, u8 reg)
        case LTC4151_SENSE_H:
                /*
                 * 20uV resolution. Convert to current as measured with
-                * an 1 mOhm sense resistor, in mA.
+                * a given sense resistor, in mA.
                 */
-               val = val * 20;
+               val = val * 20 * 1000 / data->shunt;
                break;
        case LTC4151_VIN_H:
                /* 25 mV per increment */
@@ -176,6 +178,7 @@ static int ltc4151_probe(struct i2c_client *client,
        struct device *dev = &client->dev;
        struct ltc4151_data *data;
        struct device *hwmon_dev;
+       u32 shunt;
 
        if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -ENODEV;
@@ -184,6 +187,15 @@ static int ltc4151_probe(struct i2c_client *client,
        if (!data)
                return -ENOMEM;
 
+       if (of_property_read_u32(client->dev.of_node,
+                                "shunt-resistor-micro-ohms", &shunt))
+               shunt = 1000; /* 1 mOhm if not set via DT */
+
+       if (shunt == 0)
+               return -EINVAL;
+
+       data->shunt = shunt;
+
        data->client = client;
        mutex_init(&data->update_lock);
 
@@ -199,10 +211,16 @@ static const struct i2c_device_id ltc4151_id[] = {
 };
 MODULE_DEVICE_TABLE(i2c, ltc4151_id);
 
+static const struct of_device_id ltc4151_match[] = {
+       { .compatible = "lltc,ltc4151" },
+       {},
+};
+
 /* This is the driver that will be inserted */
 static struct i2c_driver ltc4151_driver = {
        .driver = {
                .name   = "ltc4151",
+               .of_match_table = of_match_ptr(ltc4151_match),
        },
        .probe          = ltc4151_probe,
        .id_table       = ltc4151_id,