source "drivers/net/usb/Kconfig"
-source "drivers/net/pcmcia/Kconfig"
-
source "drivers/net/ppp/Kconfig"
source "drivers/net/wan/Kconfig"
obj-$(CONFIG_TR) += tokenring/
obj-$(CONFIG_WAN) += wan/
obj-$(CONFIG_ARCNET) += arcnet/
-obj-$(CONFIG_NET_PCMCIA) += pcmcia/
obj-$(CONFIG_USB_CATC) += usb/
obj-$(CONFIG_USB_KAWETH) += usb/
#
menuconfig ARCNET
- depends on NETDEVICES && (ISA || PCI)
+ depends on NETDEVICES && (ISA || PCI || PCMCIA)
tristate "ARCnet support"
---help---
If you have a network card of this type, say Y and check out the
tristate "Support for COM20020 on PCI"
depends on ARCNET_COM20020 && PCI
+config ARCNET_COM20020_CS
+ tristate "COM20020 ARCnet PCMCIA support"
+ depends on ARCNET_COM20020 && PCMCIA
+ help
+ Say Y here if you intend to attach this type of ARCnet PCMCIA card
+ to your computer.
+
+ To compile this driver as a module, choose M here: the module will be
+ called com20020_cs. If unsure, say N.
+
endif # ARCNET
obj-$(CONFIG_ARCNET_COM20020) += com20020.o
obj-$(CONFIG_ARCNET_COM20020_ISA) += com20020-isa.o
obj-$(CONFIG_ARCNET_COM20020_PCI) += com20020-pci.o
+obj-$(CONFIG_ARCNET_COM20020_CS) += com20020_cs.o
--- /dev/null
+/*
+ * Linux ARCnet driver - COM20020 PCMCIA support
+ *
+ * Written 1994-1999 by Avery Pennarun,
+ * based on an ISA version by David Woodhouse.
+ * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
+ * which was derived from pcnet_cs.c by David Hinds.
+ * Some additional portions derived from skeleton.c by Donald Becker.
+ *
+ * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
+ * for sponsoring the further development of this driver.
+ *
+ * **********************
+ *
+ * The original copyright of skeleton.c was as follows:
+ *
+ * skeleton.c Written 1993 by Donald Becker.
+ * Copyright 1993 United States Government as represented by the
+ * Director, National Security Agency. This software may only be used
+ * and distributed according to the terms of the GNU General Public License as
+ * modified by SRC, incorporated herein by reference.
+ *
+ * **********************
+ * Changes:
+ * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
+ * - reorganize kmallocs in com20020_attach, checking all for failure
+ * and releasing the previous allocations if one fails
+ * **********************
+ *
+ * For more details, see drivers/net/arcnet.c
+ *
+ * **********************
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/ptrace.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/arcdevice.h>
+#include <linux/com20020.h>
+
+#include <pcmcia/cistpl.h>
+#include <pcmcia/ds.h>
+
+#include <asm/io.h>
+#include <asm/system.h>
+
+#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
+
+
+static void regdump(struct net_device *dev)
+{
+#ifdef DEBUG
+ int ioaddr = dev->base_addr;
+ int count;
+
+ netdev_dbg(dev, "register dump:\n");
+ for (count = ioaddr; count < ioaddr + 16; count++)
+ {
+ if (!(count % 16))
+ pr_cont("%04X:", count);
+ pr_cont(" %02X", inb(count));
+ }
+ pr_cont("\n");
+
+ netdev_dbg(dev, "buffer0 dump:\n");
+ /* set up the address register */
+ count = 0;
+ outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
+ outb(count & 0xff, _ADDR_LO);
+
+ for (count = 0; count < 256+32; count++)
+ {
+ if (!(count % 16))
+ pr_cont("%04X:", count);
+
+ /* copy the data */
+ pr_cont(" %02X", inb(_MEMDATA));
+ }
+ pr_cont("\n");
+#endif
+}
+
+
+
+/*====================================================================*/
+
+/* Parameters that can be set with 'insmod' */
+
+static int node;
+static int timeout = 3;
+static int backplane;
+static int clockp;
+static int clockm;
+
+module_param(node, int, 0);
+module_param(timeout, int, 0);
+module_param(backplane, int, 0);
+module_param(clockp, int, 0);
+module_param(clockm, int, 0);
+
+MODULE_LICENSE("GPL");
+
+/*====================================================================*/
+
+static int com20020_config(struct pcmcia_device *link);
+static void com20020_release(struct pcmcia_device *link);
+
+static void com20020_detach(struct pcmcia_device *p_dev);
+
+/*====================================================================*/
+
+typedef struct com20020_dev_t {
+ struct net_device *dev;
+} com20020_dev_t;
+
+static int com20020_probe(struct pcmcia_device *p_dev)
+{
+ com20020_dev_t *info;
+ struct net_device *dev;
+ struct arcnet_local *lp;
+
+ dev_dbg(&p_dev->dev, "com20020_attach()\n");
+
+ /* Create new network device */
+ info = kzalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
+ if (!info)
+ goto fail_alloc_info;
+
+ dev = alloc_arcdev("");
+ if (!dev)
+ goto fail_alloc_dev;
+
+ lp = netdev_priv(dev);
+ lp->timeout = timeout;
+ lp->backplane = backplane;
+ lp->clockp = clockp;
+ lp->clockm = clockm & 3;
+ lp->hw.owner = THIS_MODULE;
+
+ /* fill in our module parameters as defaults */
+ dev->dev_addr[0] = node;
+
+ p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
+ p_dev->resource[0]->end = 16;
+ p_dev->config_flags |= CONF_ENABLE_IRQ;
+
+ info->dev = dev;
+ p_dev->priv = info;
+
+ return com20020_config(p_dev);
+
+fail_alloc_dev:
+ kfree(info);
+fail_alloc_info:
+ return -ENOMEM;
+} /* com20020_attach */
+
+static void com20020_detach(struct pcmcia_device *link)
+{
+ struct com20020_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
+
+ dev_dbg(&link->dev, "detach...\n");
+
+ dev_dbg(&link->dev, "com20020_detach\n");
+
+ dev_dbg(&link->dev, "unregister...\n");
+
+ unregister_netdev(dev);
+
+ /*
+ * this is necessary because we register our IRQ separately
+ * from card services.
+ */
+ if (dev->irq)
+ free_irq(dev->irq, dev);
+
+ com20020_release(link);
+
+ /* Unlink device structure, free bits */
+ dev_dbg(&link->dev, "unlinking...\n");
+ if (link->priv)
+ {
+ dev = info->dev;
+ if (dev)
+ {
+ dev_dbg(&link->dev, "kfree...\n");
+ free_netdev(dev);
+ }
+ dev_dbg(&link->dev, "kfree2...\n");
+ kfree(info);
+ }
+
+} /* com20020_detach */
+
+static int com20020_config(struct pcmcia_device *link)
+{
+ struct arcnet_local *lp;
+ com20020_dev_t *info;
+ struct net_device *dev;
+ int i, ret;
+ int ioaddr;
+
+ info = link->priv;
+ dev = info->dev;
+
+ dev_dbg(&link->dev, "config...\n");
+
+ dev_dbg(&link->dev, "com20020_config\n");
+
+ dev_dbg(&link->dev, "baseport1 is %Xh\n",
+ (unsigned int) link->resource[0]->start);
+
+ i = -ENODEV;
+ link->io_lines = 16;
+
+ if (!link->resource[0]->start)
+ {
+ for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
+ {
+ link->resource[0]->start = ioaddr;
+ i = pcmcia_request_io(link);
+ if (i == 0)
+ break;
+ }
+ }
+ else
+ i = pcmcia_request_io(link);
+
+ if (i != 0)
+ {
+ dev_dbg(&link->dev, "requestIO failed totally!\n");
+ goto failed;
+ }
+
+ ioaddr = dev->base_addr = link->resource[0]->start;
+ dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
+
+ dev_dbg(&link->dev, "request IRQ %d\n",
+ link->irq);
+ if (!link->irq)
+ {
+ dev_dbg(&link->dev, "requestIRQ failed totally!\n");
+ goto failed;
+ }
+
+ dev->irq = link->irq;
+
+ ret = pcmcia_enable_device(link);
+ if (ret)
+ goto failed;
+
+ if (com20020_check(dev))
+ {
+ regdump(dev);
+ goto failed;
+ }
+
+ lp = netdev_priv(dev);
+ lp->card_name = "PCMCIA COM20020";
+ lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
+
+ SET_NETDEV_DEV(dev, &link->dev);
+
+ i = com20020_found(dev, 0); /* calls register_netdev */
+
+ if (i != 0) {
+ dev_notice(&link->dev,
+ "com20020_found() failed\n");
+ goto failed;
+ }
+
+ netdev_dbg(dev, "port %#3lx, irq %d\n",
+ dev->base_addr, dev->irq);
+ return 0;
+
+failed:
+ dev_dbg(&link->dev, "com20020_config failed...\n");
+ com20020_release(link);
+ return -ENODEV;
+} /* com20020_config */
+
+static void com20020_release(struct pcmcia_device *link)
+{
+ dev_dbg(&link->dev, "com20020_release\n");
+ pcmcia_disable_device(link);
+}
+
+static int com20020_suspend(struct pcmcia_device *link)
+{
+ com20020_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
+
+ if (link->open)
+ netif_device_detach(dev);
+
+ return 0;
+}
+
+static int com20020_resume(struct pcmcia_device *link)
+{
+ com20020_dev_t *info = link->priv;
+ struct net_device *dev = info->dev;
+
+ if (link->open) {
+ int ioaddr = dev->base_addr;
+ struct arcnet_local *lp = netdev_priv(dev);
+ ARCRESET;
+ }
+
+ return 0;
+}
+
+static const struct pcmcia_device_id com20020_ids[] = {
+ PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
+ "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
+ PCMCIA_DEVICE_PROD_ID12("SoHard AG",
+ "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
+ PCMCIA_DEVICE_NULL
+};
+MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
+
+static struct pcmcia_driver com20020_cs_driver = {
+ .owner = THIS_MODULE,
+ .name = "com20020_cs",
+ .probe = com20020_probe,
+ .remove = com20020_detach,
+ .id_table = com20020_ids,
+ .suspend = com20020_suspend,
+ .resume = com20020_resume,
+};
+
+static int __init init_com20020_cs(void)
+{
+ return pcmcia_register_driver(&com20020_cs_driver);
+}
+
+static void __exit exit_com20020_cs(void)
+{
+ pcmcia_unregister_driver(&com20020_cs_driver);
+}
+
+module_init(init_com20020_cs);
+module_exit(exit_com20020_cs);
+++ /dev/null
-#
-# PCMCIA Network device configuration
-#
-
-menuconfig NET_PCMCIA
- bool "PCMCIA network device support"
- depends on PCMCIA
- ---help---
- Say Y if you would like to include support for any PCMCIA or CardBus
- network adapters, then say Y to the driver for your particular card
- below. PCMCIA- or PC-cards are credit-card size devices often used
- with laptops computers; CardBus is the newer and faster version of
- PCMCIA.
-
- To use your PC-cards, you will need supporting software from David
- Hinds' pcmcia-cs package (see the file <file:Documentation/Changes>
- for location). You also want to check out the PCMCIA-HOWTO,
- available from <http://www.tldp.org/docs.html#howto>.
-
- If unsure, say N.
-
-if NET_PCMCIA && PCMCIA
-
-config ARCNET_COM20020_CS
- tristate "COM20020 ARCnet PCMCIA support"
- depends on ARCNET_COM20020
- help
- Say Y here if you intend to attach this type of ARCnet PCMCIA card
- to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called com20020_cs. If unsure, say N.
-
-endif # NET_PCMCIA
+++ /dev/null
-#
-# Makefile for the Linux PCMCIA network device drivers.
-#
-
-# 16-bit client drivers
-obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
+++ /dev/null
-/*
- * Linux ARCnet driver - COM20020 PCMCIA support
- *
- * Written 1994-1999 by Avery Pennarun,
- * based on an ISA version by David Woodhouse.
- * Derived from ibmtr_cs.c by Steve Kipisz (pcmcia-cs 3.1.4)
- * which was derived from pcnet_cs.c by David Hinds.
- * Some additional portions derived from skeleton.c by Donald Becker.
- *
- * Special thanks to Contemporary Controls, Inc. (www.ccontrols.com)
- * for sponsoring the further development of this driver.
- *
- * **********************
- *
- * The original copyright of skeleton.c was as follows:
- *
- * skeleton.c Written 1993 by Donald Becker.
- * Copyright 1993 United States Government as represented by the
- * Director, National Security Agency. This software may only be used
- * and distributed according to the terms of the GNU General Public License as
- * modified by SRC, incorporated herein by reference.
- *
- * **********************
- * Changes:
- * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 08/08/2000
- * - reorganize kmallocs in com20020_attach, checking all for failure
- * and releasing the previous allocations if one fails
- * **********************
- *
- * For more details, see drivers/net/arcnet.c
- *
- * **********************
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/netdevice.h>
-#include <linux/arcdevice.h>
-#include <linux/com20020.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/ds.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-
-#define VERSION "arcnet: COM20020 PCMCIA support loaded.\n"
-
-
-static void regdump(struct net_device *dev)
-{
-#ifdef DEBUG
- int ioaddr = dev->base_addr;
- int count;
-
- netdev_dbg(dev, "register dump:\n");
- for (count = ioaddr; count < ioaddr + 16; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
- pr_cont(" %02X", inb(count));
- }
- pr_cont("\n");
-
- netdev_dbg(dev, "buffer0 dump:\n");
- /* set up the address register */
- count = 0;
- outb((count >> 8) | RDDATAflag | AUTOINCflag, _ADDR_HI);
- outb(count & 0xff, _ADDR_LO);
-
- for (count = 0; count < 256+32; count++)
- {
- if (!(count % 16))
- pr_cont("%04X:", count);
-
- /* copy the data */
- pr_cont(" %02X", inb(_MEMDATA));
- }
- pr_cont("\n");
-#endif
-}
-
-
-
-/*====================================================================*/
-
-/* Parameters that can be set with 'insmod' */
-
-static int node;
-static int timeout = 3;
-static int backplane;
-static int clockp;
-static int clockm;
-
-module_param(node, int, 0);
-module_param(timeout, int, 0);
-module_param(backplane, int, 0);
-module_param(clockp, int, 0);
-module_param(clockm, int, 0);
-
-MODULE_LICENSE("GPL");
-
-/*====================================================================*/
-
-static int com20020_config(struct pcmcia_device *link);
-static void com20020_release(struct pcmcia_device *link);
-
-static void com20020_detach(struct pcmcia_device *p_dev);
-
-/*====================================================================*/
-
-typedef struct com20020_dev_t {
- struct net_device *dev;
-} com20020_dev_t;
-
-static int com20020_probe(struct pcmcia_device *p_dev)
-{
- com20020_dev_t *info;
- struct net_device *dev;
- struct arcnet_local *lp;
-
- dev_dbg(&p_dev->dev, "com20020_attach()\n");
-
- /* Create new network device */
- info = kzalloc(sizeof(struct com20020_dev_t), GFP_KERNEL);
- if (!info)
- goto fail_alloc_info;
-
- dev = alloc_arcdev("");
- if (!dev)
- goto fail_alloc_dev;
-
- lp = netdev_priv(dev);
- lp->timeout = timeout;
- lp->backplane = backplane;
- lp->clockp = clockp;
- lp->clockm = clockm & 3;
- lp->hw.owner = THIS_MODULE;
-
- /* fill in our module parameters as defaults */
- dev->dev_addr[0] = node;
-
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->resource[0]->end = 16;
- p_dev->config_flags |= CONF_ENABLE_IRQ;
-
- info->dev = dev;
- p_dev->priv = info;
-
- return com20020_config(p_dev);
-
-fail_alloc_dev:
- kfree(info);
-fail_alloc_info:
- return -ENOMEM;
-} /* com20020_attach */
-
-static void com20020_detach(struct pcmcia_device *link)
-{
- struct com20020_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
-
- dev_dbg(&link->dev, "detach...\n");
-
- dev_dbg(&link->dev, "com20020_detach\n");
-
- dev_dbg(&link->dev, "unregister...\n");
-
- unregister_netdev(dev);
-
- /*
- * this is necessary because we register our IRQ separately
- * from card services.
- */
- if (dev->irq)
- free_irq(dev->irq, dev);
-
- com20020_release(link);
-
- /* Unlink device structure, free bits */
- dev_dbg(&link->dev, "unlinking...\n");
- if (link->priv)
- {
- dev = info->dev;
- if (dev)
- {
- dev_dbg(&link->dev, "kfree...\n");
- free_netdev(dev);
- }
- dev_dbg(&link->dev, "kfree2...\n");
- kfree(info);
- }
-
-} /* com20020_detach */
-
-static int com20020_config(struct pcmcia_device *link)
-{
- struct arcnet_local *lp;
- com20020_dev_t *info;
- struct net_device *dev;
- int i, ret;
- int ioaddr;
-
- info = link->priv;
- dev = info->dev;
-
- dev_dbg(&link->dev, "config...\n");
-
- dev_dbg(&link->dev, "com20020_config\n");
-
- dev_dbg(&link->dev, "baseport1 is %Xh\n",
- (unsigned int) link->resource[0]->start);
-
- i = -ENODEV;
- link->io_lines = 16;
-
- if (!link->resource[0]->start)
- {
- for (ioaddr = 0x100; ioaddr < 0x400; ioaddr += 0x10)
- {
- link->resource[0]->start = ioaddr;
- i = pcmcia_request_io(link);
- if (i == 0)
- break;
- }
- }
- else
- i = pcmcia_request_io(link);
-
- if (i != 0)
- {
- dev_dbg(&link->dev, "requestIO failed totally!\n");
- goto failed;
- }
-
- ioaddr = dev->base_addr = link->resource[0]->start;
- dev_dbg(&link->dev, "got ioaddr %Xh\n", ioaddr);
-
- dev_dbg(&link->dev, "request IRQ %d\n",
- link->irq);
- if (!link->irq)
- {
- dev_dbg(&link->dev, "requestIRQ failed totally!\n");
- goto failed;
- }
-
- dev->irq = link->irq;
-
- ret = pcmcia_enable_device(link);
- if (ret)
- goto failed;
-
- if (com20020_check(dev))
- {
- regdump(dev);
- goto failed;
- }
-
- lp = netdev_priv(dev);
- lp->card_name = "PCMCIA COM20020";
- lp->card_flags = ARC_CAN_10MBIT; /* pretend all of them can 10Mbit */
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- i = com20020_found(dev, 0); /* calls register_netdev */
-
- if (i != 0) {
- dev_notice(&link->dev,
- "com20020_found() failed\n");
- goto failed;
- }
-
- netdev_dbg(dev, "port %#3lx, irq %d\n",
- dev->base_addr, dev->irq);
- return 0;
-
-failed:
- dev_dbg(&link->dev, "com20020_config failed...\n");
- com20020_release(link);
- return -ENODEV;
-} /* com20020_config */
-
-static void com20020_release(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "com20020_release\n");
- pcmcia_disable_device(link);
-}
-
-static int com20020_suspend(struct pcmcia_device *link)
-{
- com20020_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
-
- if (link->open)
- netif_device_detach(dev);
-
- return 0;
-}
-
-static int com20020_resume(struct pcmcia_device *link)
-{
- com20020_dev_t *info = link->priv;
- struct net_device *dev = info->dev;
-
- if (link->open) {
- int ioaddr = dev->base_addr;
- struct arcnet_local *lp = netdev_priv(dev);
- ARCRESET;
- }
-
- return 0;
-}
-
-static const struct pcmcia_device_id com20020_ids[] = {
- PCMCIA_DEVICE_PROD_ID12("Contemporary Control Systems, Inc.",
- "PCM20 Arcnet Adapter", 0x59991666, 0x95dfffaf),
- PCMCIA_DEVICE_PROD_ID12("SoHard AG",
- "SH ARC PCMCIA", 0xf8991729, 0x69dff0c7),
- PCMCIA_DEVICE_NULL
-};
-MODULE_DEVICE_TABLE(pcmcia, com20020_ids);
-
-static struct pcmcia_driver com20020_cs_driver = {
- .owner = THIS_MODULE,
- .name = "com20020_cs",
- .probe = com20020_probe,
- .remove = com20020_detach,
- .id_table = com20020_ids,
- .suspend = com20020_suspend,
- .resume = com20020_resume,
-};
-
-static int __init init_com20020_cs(void)
-{
- return pcmcia_register_driver(&com20020_cs_driver);
-}
-
-static void __exit exit_com20020_cs(void)
-{
- pcmcia_unregister_driver(&com20020_cs_driver);
-}
-
-module_init(init_com20020_cs);
-module_exit(exit_com20020_cs);
projects / cascardo / linux.git / commitdiff