drivers: net: cpsw: Fix TX_IN_SEL offset

The TX_IN_SEL offset for the CPSW_PORT/TX_IN_CTL register was
incorrect. This caused the Dual MAC mode to never get set when
it should. It also caused possible unintentional setting of a
bit in the CPSW_PORT/TX_BLKS_REM register.

The purpose of setting the Dual MAC mode for this register is to:

    "... allow packets from both ethernet ports to be written into
     the FIFO without one port starving the other port."
					- AM335x ARM TRM

Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index d879448..c560f9a 100644 (file)
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -129,9 +129,9 @@ do {                                                                \
 #define CPSW_VLAN_AWARE                BIT(1)
 #define CPSW_ALE_VLAN_AWARE    1
 
-#define CPSW_FIFO_NORMAL_MODE          (0 << 15)
-#define CPSW_FIFO_DUAL_MAC_MODE                (1 << 15)
-#define CPSW_FIFO_RATE_LIMIT_MODE      (2 << 15)
+#define CPSW_FIFO_NORMAL_MODE          (0 << 16)
+#define CPSW_FIFO_DUAL_MAC_MODE                (1 << 16)
+#define CPSW_FIFO_RATE_LIMIT_MODE      (2 << 16)
 
 #define CPSW_INTPACEEN         (0x3f << 16)
 #define CPSW_INTPRESCALE_MASK  (0x7FF << 0)