drm/exynos: fixed pm feature for fimd module.

this patch separates fimd specific power on/off function from pm function
and the pm interfaces will call that function for power on or off.
and also removes unnecessary codes of resume function.

Signed-off-by: Inki Dae <inki.dae@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>

diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
index ca83139..b6a737d 100644 (file)
--- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c
@@ -158,7 +158,8 @@ static void fimd_dpms(struct device *subdrv_dev, int mode)
        case DRM_MODE_DPMS_STANDBY:
        case DRM_MODE_DPMS_SUSPEND:
        case DRM_MODE_DPMS_OFF:
-               pm_runtime_put_sync(subdrv_dev);
+               if (!ctx->suspended)
+                       pm_runtime_put_sync(subdrv_dev);
                break;
        default:
                DRM_DEBUG_KMS("unspecified mode %d\n", mode);
@@ -734,6 +735,46 @@ static void fimd_clear_win(struct fimd_context *ctx, int win)
        writel(val, ctx->regs + SHADOWCON);
 }
 
+static int fimd_power_on(struct fimd_context *ctx, bool enable)
+{
+       struct exynos_drm_subdrv *subdrv = &ctx->subdrv;
+       struct device *dev = subdrv->manager.dev;
+
+       DRM_DEBUG_KMS("%s\n", __FILE__);
+
+       if (enable != false && enable != true)
+               return -EINVAL;
+
+       if (enable) {
+               int ret;
+
+               ret = clk_enable(ctx->bus_clk);
+               if (ret < 0)
+                       return ret;
+
+               ret = clk_enable(ctx->lcd_clk);
+               if  (ret < 0) {
+                       clk_disable(ctx->bus_clk);
+                       return ret;
+               }
+
+               ctx->suspended = false;
+
+               /* if vblank was enabled status, enable it again. */
+               if (test_and_clear_bit(0, &ctx->irq_flags))
+                       fimd_enable_vblank(dev);
+
+               fimd_apply(dev);
+       } else {
+               clk_disable(ctx->lcd_clk);
+               clk_disable(ctx->bus_clk);
+
+               ctx->suspended = true;
+       }
+
+       return 0;
+}
+
 static int __devinit fimd_probe(struct platform_device *pdev)
 {
        struct device *dev = &pdev->dev;
@@ -911,39 +952,30 @@ out:
 #ifdef CONFIG_PM_SLEEP
 static int fimd_suspend(struct device *dev)
 {
-       int ret;
+       struct fimd_context *ctx = get_fimd_context(dev);
 
        if (pm_runtime_suspended(dev))
                return 0;
 
-       ret = pm_runtime_suspend(dev);
-       if (ret < 0)
-               return ret;
-
-       return 0;
+       /*
+        * do not use pm_runtime_suspend(). if pm_runtime_suspend() is
+        * called here, an error would be returned by that interface
+        * because the usage_count of pm runtime is more than 1.
+        */
+       return fimd_power_on(ctx, false);
 }
 
 static int fimd_resume(struct device *dev)
 {
-       int ret;
-
-       ret = pm_runtime_resume(dev);
-       if (ret < 0) {
-               DRM_ERROR("failed to resume runtime pm.\n");
-               return ret;
-       }
-
-       pm_runtime_disable(dev);
-
-       ret = pm_runtime_set_active(dev);
-       if (ret < 0) {
-               DRM_ERROR("failed to active runtime pm.\n");
-               pm_runtime_enable(dev);
-               pm_runtime_suspend(dev);
-               return ret;
-       }
+       struct fimd_context *ctx = get_fimd_context(dev);
 
-       pm_runtime_enable(dev);
+       /*
+        * if entered to sleep when lcd panel was on, the usage_count
+        * of pm runtime would still be 1 so in this case, fimd driver
+        * should be on directly not drawing on pm runtime interface.
+        */
+       if (!pm_runtime_suspended(dev))
+               return fimd_power_on(ctx, true);
 
        return 0;
 }
@@ -956,39 +988,16 @@ static int fimd_runtime_suspend(struct device *dev)
 
        DRM_DEBUG_KMS("%s\n", __FILE__);
 
-       clk_disable(ctx->lcd_clk);
-       clk_disable(ctx->bus_clk);
-
-       ctx->suspended = true;
-       return 0;
+       return fimd_power_on(ctx, false);
 }
 
 static int fimd_runtime_resume(struct device *dev)
 {
        struct fimd_context *ctx = get_fimd_context(dev);
-       int ret;
 
        DRM_DEBUG_KMS("%s\n", __FILE__);
 
-       ret = clk_enable(ctx->bus_clk);
-       if (ret < 0)
-               return ret;
-
-       ret = clk_enable(ctx->lcd_clk);
-       if  (ret < 0) {
-               clk_disable(ctx->bus_clk);
-               return ret;
-       }
-
-       ctx->suspended = false;
-
-       /* if vblank was enabled status, enable it again. */
-       if (test_and_clear_bit(0, &ctx->irq_flags))
-               fimd_enable_vblank(dev);
-
-       fimd_apply(dev);
-
-       return 0;
+       return fimd_power_on(ctx, true);
 }
 #endif