[media] rtl2830: declare two tables as constant

This optimizes few hundred bytes from data to text segment.
Also remove one unused function that was commented out already.

Signed-off-by: Antti Palosaari <crope@iki.fi>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

diff --git a/drivers/media/dvb-frontends/rtl2830.c b/drivers/media/dvb-frontends/rtl2830.c
index 3954760..b0f6ec0 100644 (file)
--- a/drivers/media/dvb-frontends/rtl2830.c
+++ b/drivers/media/dvb-frontends/rtl2830.c
@@ -28,7 +28,7 @@
 #include "rtl2830_priv.h"
 
 /* write multiple hardware registers */
-static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
+static int rtl2830_wr(struct rtl2830_priv *priv, u8 reg, const u8 *val, int len)
 {
        int ret;
        u8 buf[1+len];
@@ -85,7 +85,8 @@ static int rtl2830_rd(struct rtl2830_priv *priv, u8 reg, u8 *val, int len)
 }
 
 /* write multiple registers */
-static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
+static int rtl2830_wr_regs(struct rtl2830_priv *priv, u16 reg, const u8 *val,
+               int len)
 {
        int ret;
        u8 reg2 = (reg >> 0) & 0xff;
@@ -122,14 +123,6 @@ static int rtl2830_rd_regs(struct rtl2830_priv *priv, u16 reg, u8 *val, int len)
        return rtl2830_rd(priv, reg2, val, len);
 }
 
-#if 0 /* currently not used */
-/* write single register */
-static int rtl2830_wr_reg(struct rtl2830_priv *priv, u16 reg, u8 val)
-{
-       return rtl2830_wr_regs(priv, reg, &val, 1);
-}
-#endif
-
 /* read single register */
 static int rtl2830_rd_reg(struct rtl2830_priv *priv, u16 reg, u8 *val)
 {
@@ -281,7 +274,7 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
        u64 num;
        u8 buf[3], tmp;
        u32 if_ctl, if_frequency;
-       static u8 bw_params1[3][34] = {
+       static const u8 bw_params1[3][34] = {
                {
                0x1f, 0xf0, 0x1f, 0xf0, 0x1f, 0xfa, 0x00, 0x17, 0x00, 0x41,
                0x00, 0x64, 0x00, 0x67, 0x00, 0x38, 0x1f, 0xde, 0x1f, 0x7a,
@@ -299,10 +292,10 @@ static int rtl2830_set_frontend(struct dvb_frontend *fe)
                0x04, 0x24, 0x04, 0xdb, /* 8 MHz */
                },
        };
-       static u8 bw_params2[3][6] = {
-               {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30,}, /* 6 MHz */
-               {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98,}, /* 7 MHz */
-               {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64,}, /* 8 MHz */
+       static const u8 bw_params2[3][6] = {
+               {0xc3, 0x0c, 0x44, 0x33, 0x33, 0x30}, /* 6 MHz */
+               {0xb8, 0xe3, 0x93, 0x99, 0x99, 0x98}, /* 7 MHz */
+               {0xae, 0xba, 0xf3, 0x26, 0x66, 0x64}, /* 8 MHz */
        };
 
        dev_dbg(&priv->i2c->dev,