staging: rtl8712: fix block comments

This patch fixes the following checkpatch.pl warning:
Block comments use * on subsequent lines

Signed-off-by: Shaily Sangwan <shaily15297@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/rtl8712/rtl8712_recv.h b/drivers/staging/rtl8712/rtl8712_recv.h
index 96ca3e2..0b0c273 100644 (file)
--- a/drivers/staging/rtl8712/rtl8712_recv.h
+++ b/drivers/staging/rtl8712/rtl8712_recv.h
@@ -116,13 +116,13 @@ struct recv_buf {
 };
 
 /*
-       head  ----->
-               data  ----->
-                       payload
-               tail  ----->
-       end   ----->
-       len = (unsigned int )(tail - data);
-*/
+ *     head  ----->
+ *             data  ----->
+ *                     payload
+ *             tail  ----->
+ *     end   ----->
+ *     len = (unsigned int )(tail - data);
+ */
 struct recv_frame_hdr {
        struct list_head list;
        _pkt    *pkt;

diff --git a/drivers/staging/rtl8712/rtl871x_cmd.h b/drivers/staging/rtl8712/rtl871x_cmd.h
index a2cee36..3284dcf 100644 (file)
--- a/drivers/staging/rtl8712/rtl871x_cmd.h
+++ b/drivers/staging/rtl8712/rtl871x_cmd.h
@@ -217,15 +217,15 @@ struct SetMacAddr_param {
 };
 
 /*
-Caller Ad-Hoc/AP
-
-Command -Rsp(AID == CAMID) mode
-
-This is to force fw to add an sta_data entry per driver's request.
-
-FW will write an cam entry associated with it.
-
-*/
+ *     Caller Ad-Hoc/AP
+ *
+ *     Command -Rsp(AID == CAMID) mode
+ *
+ *     This is to force fw to add an sta_data entry per driver's request.
+ *
+ *     FW will write an cam entry associated with it.
+ *
+ */
 struct set_assocsta_parm {
        u8      addr[ETH_ALEN];
 };
@@ -236,27 +236,27 @@ struct set_assocsta_rsp {
 };
 
 /*
-       Caller Ad-Hoc/AP
-
-       Command mode
-
-       This is to force fw to del an sta_data entry per driver's request
-
-       FW will invalidate the cam entry associated with it.
-
-*/
+ *     Caller Ad-Hoc/AP
+ *
+ *     Command mode
+ *
+ *     This is to force fw to del an sta_data entry per driver's request
+ *
+ *     FW will invalidate the cam entry associated with it.
+ *
+ */
 struct del_assocsta_parm {
        u8      addr[ETH_ALEN];
 };
 
 /*
-Caller Mode: AP/Ad-HoC(M)
-
-Notes: To notify fw that given staid has changed its power state
-
-Command Mode
-
-*/
+ *     Caller Mode: AP/Ad-HoC(M)
+ *
+ *     Notes: To notify fw that given staid has changed its power state
+ *
+ *     Command Mode
+ *
+ */
 struct setstapwrstate_parm {
        u8      staid;
        u8      status;
@@ -264,25 +264,25 @@ struct setstapwrstate_parm {
 };
 
 /*
-Caller Mode: Any
-
-Notes: To setup the basic rate of RTL8711
-
-Command Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To setup the basic rate of RTL8711
+ *
+ *     Command Mode
+ *
+ */
 struct setbasicrate_parm {
        u8      basicrates[NumRates];
 };
 
 /*
-Caller Mode: Any
-
-Notes: To read the current basic rate
-
-Command-Rsp Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To read the current basic rate
+ *
+ *     Command-Rsp Mode
+ *
+ */
 struct getbasicrate_parm {
        u32 rsvd;
 };
@@ -292,13 +292,13 @@ struct getbasicrate_rsp {
 };
 
 /*
-Caller Mode: Any
-
-Notes: To setup the data rate of RTL8711
-
-Command Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To setup the data rate of RTL8711
+ *
+ *     Command Mode
+ *
+ */
 struct setdatarate_parm {
        u8      mac_id;
        u8      datarates[NumRates];
@@ -334,13 +334,13 @@ struct SetChannelPlan_param {
 };
 
 /*
-Caller Mode: Any
-
-Notes: To read the current data rate
-
-Command-Rsp Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To read the current data rate
+ *
+ *     Command-Rsp Mode
+ *
+ */
 struct getdatarate_parm {
        u32 rsvd;
 
@@ -351,36 +351,36 @@ struct getdatarate_rsp {
 
 
 /*
-Caller Mode: Any
-AP: AP can use the info for the contents of beacon frame
-Infra: STA can use the info when sitesurveying
-Ad-HoC(M): Like AP
-Ad-HoC(C): Like STA
-
-
-Notes: To set the phy capability of the NIC
-
-Command Mode
-
-*/
+ *     Caller Mode: Any
+ *     AP: AP can use the info for the contents of beacon frame
+ *     Infra: STA can use the info when sitesurveying
+ *     Ad-HoC(M): Like AP
+ *     Ad-HoC(C): Like STA
+ *
+ *
+ *     Notes: To set the phy capability of the NIC
+ *
+ *     Command Mode
+ *
+ */
 
 /*
-Caller Mode: Any
-
-Notes: To set the channel/modem/band
-This command will be used when channel/modem/band is changed.
-
-Command Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To set the channel/modem/band
+ *     This command will be used when channel/modem/band is changed.
+ *
+ *     Command Mode
+ *
+ */
 /*
-Caller Mode: Any
-
-Notes: To get the current setting of channel/modem/band
-
-Command-Rsp Mode
-
-*/
+ *     Caller Mode: Any
+ *
+ *     Notes: To get the current setting of channel/modem/band
+ *
+ *     Command-Rsp Mode
+ *
+ */
 struct getphy_rsp {
        u8      rfchannel;
        u8      modem;
@@ -430,58 +430,58 @@ struct getrfintfs_parm {
 };
 
 /*
-       Notes: This command is used for H2C/C2H loopback testing
-
-       mac[0] == 0
-       ==> CMD mode, return H2C_SUCCESS.
-       The following condition must be ture under CMD mode
-               mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
-               s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
-               s2 == (b1 << 8 | b0);
-
-       mac[0] == 1
-       ==> CMD_RSP mode, return H2C_SUCCESS_RSP
-
-       The rsp layout shall be:
-       rsp:                    parm:
-               mac[0]  =   mac[5];
-               mac[1]  =   mac[4];
-               mac[2]  =   mac[3];
-               mac[3]  =   mac[2];
-               mac[4]  =   mac[1];
-               mac[5]  =   mac[0];
-               s0              =   s1;
-               s1              =   swap16(s0);
-               w0              =       swap32(w1);
-               b0              =       b1
-               s2              =       s0 + s1
-               b1              =       b0
-               w1              =       w0
-
-       mac[0] ==       2
-       ==> CMD_EVENT mode, return      H2C_SUCCESS
-       The event layout shall be:
-       event:       parm:
-       mac[0]  =   mac[5];
-       mac[1]  =   mac[4];
-       mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
-       mac[3]  =   mac[2];
-       mac[4]  =   mac[1];
-       mac[5]  =   mac[0];
-       s0              =   swap16(s0) - event.mac[2];
-       s1              =   s1 + event.mac[2];
-       w0              =       swap32(w0);
-       b0              =       b1
-       s2              =       s0 + event.mac[2]
-       b1              =       b0
-       w1              =       swap32(w1) - event.mac[2];
-
-       parm->mac[3] is the total event counts that host requested.
-
-
-       event will be the same with the cmd's param.
-
-*/
+ *     Notes: This command is used for H2C/C2H loopback testing
+ *
+ *     mac[0] == 0
+ *     ==> CMD mode, return H2C_SUCCESS.
+ *     The following condition must be ture under CMD mode
+ *             mac[1] == mac[4], mac[2] == mac[3], mac[0]=mac[5]= 0;
+ *             s0 == 0x1234, s1 == 0xabcd, w0 == 0x78563412, w1 == 0x5aa5def7;
+ *             s2 == (b1 << 8 | b0);
+ *
+ *     mac[0] == 1
+ *     ==> CMD_RSP mode, return H2C_SUCCESS_RSP
+ *
+ *     The rsp layout shall be:
+ *     rsp:                    parm:
+ *             mac[0]  =   mac[5];
+ *             mac[1]  =   mac[4];
+ *             mac[2]  =   mac[3];
+ *             mac[3]  =   mac[2];
+ *             mac[4]  =   mac[1];
+ *             mac[5]  =   mac[0];
+ *             s0              =   s1;
+ *             s1              =   swap16(s0);
+ *             w0              =       swap32(w1);
+ *             b0              =       b1
+ *             s2              =       s0 + s1
+ *             b1              =       b0
+ *             w1              =       w0
+ *
+ *     mac[0] ==       2
+ *     ==> CMD_EVENT mode, return      H2C_SUCCESS
+ *     The event layout shall be:
+ *     event:       parm:
+ *     mac[0]  =   mac[5];
+ *     mac[1]  =   mac[4];
+ *     mac[2]  =   event's sequence number, starting from 1 to parm's marc[3]
+ *     mac[3]  =   mac[2];
+ *     mac[4]  =   mac[1];
+ *     mac[5]  =   mac[0];
+ *     s0              =   swap16(s0) - event.mac[2];
+ *     s1              =   s1 + event.mac[2];
+ *     w0              =       swap32(w0);
+ *     b0              =       b1
+ *     s2              =       s0 + event.mac[2]
+ *     b1              =       b0
+ *     w1              =       swap32(w1) - event.mac[2];
+ *
+ *     parm->mac[3] is the total event counts that host requested.
+ *
+ *
+ *     event will be the same with the cmd's param.
+ *
+ */
 
 /* CMD param Formart for DRV INTERNAL CMD HDL*/
 struct drvint_cmd_parm {