net: phy: bcm7xxx: re-advertise all supported modes out of suspend

The BCM7xxx internal Gigabit PHYs on 28nm process platforms come out
reset without any half-duplex or "hub" compatible advertised modes,
which was causing auto-negotiation issues coming out of S3
suspend/resume, we just could not establish a link with a half-duplex
only link partner.

Make sure that the resume function properly re-configures the PHY device
to advertise all supported modes.

Fixes: b560a58c45c6 ("net: phy: add Broadcom BCM7xxx internal PHY driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@greenl8ke.davemloft.net>

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index 2b40548..a8ca03f 100644 (file)
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -157,6 +157,23 @@ static int bcm7xxx_28nm_config_init(struct phy_device *phydev)
        return bcm7xxx_28nm_afe_config_init(phydev);
 }
 
+static int bcm7xxx_28nm_resume(struct phy_device *phydev)
+{
+       int ret;
+
+       /* Re-apply workarounds coming out suspend/resume */
+       ret = bcm7xxx_28nm_config_init(phydev);
+       if (ret)
+               return ret;
+
+       /* 28nm Gigabit PHYs come out of reset without any half-duplex
+        * or "hub" compliant advertised mode, fix that. This does not
+        * cause any problems with the PHY library since genphy_config_aneg()
+        * gracefully handles auto-negotiated and forced modes.
+        */
+       return genphy_config_aneg(phydev);
+}
+
 static int phy_set_clr_bits(struct phy_device *dev, int location,
                                        int set_mask, int clr_mask)
 {
@@ -258,7 +275,7 @@ static struct phy_driver bcm7xxx_driver[] = {
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .suspend        = bcm7xxx_suspend,
-       .resume         = bcm7xxx_28nm_afe_config_init,
+       .resume         = bcm7xxx_28nm_resume,
        .driver         = { .owner = THIS_MODULE },
 }, {
        .phy_id         = PHY_ID_BCM7439,
@@ -271,7 +288,7 @@ static struct phy_driver bcm7xxx_driver[] = {
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .suspend        = bcm7xxx_suspend,
-       .resume         = bcm7xxx_28nm_afe_config_init,
+       .resume         = bcm7xxx_28nm_resume,
        .driver         = { .owner = THIS_MODULE },
 }, {
        .phy_id         = PHY_ID_BCM7445,
@@ -284,7 +301,7 @@ static struct phy_driver bcm7xxx_driver[] = {
        .config_aneg    = genphy_config_aneg,
        .read_status    = genphy_read_status,
        .suspend        = bcm7xxx_suspend,
-       .resume         = bcm7xxx_28nm_config_init,
+       .resume         = bcm7xxx_28nm_afe_config_init,
        .driver         = { .owner = THIS_MODULE },
 }, {
        .phy_id         = PHY_BCM_OUI_4,