Move architecture independant crc header file out of the blackfin folder.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
+++ /dev/null
-/*
- * bfin_crc.h - interface to Blackfin CRC controllers
- *
- * Copyright 2012 Analog Devices Inc.
- *
- * Licensed under the GPL-2 or later.
- */
-
-#ifndef __BFIN_CRC_H__
-#define __BFIN_CRC_H__
-
-/* Function driver which use hardware crc must initialize the structure */
-struct crc_info {
- /* Input data address */
- unsigned char *in_addr;
- /* Output data address */
- unsigned char *out_addr;
- /* Input or output bytes */
- unsigned long datasize;
- union {
- /* CRC to compare with that of input buffer */
- unsigned long crc_compare;
- /* Value to compare with input data */
- unsigned long val_verify;
- /* Value to fill */
- unsigned long val_fill;
- };
- /* Value to program the 32b CRC Polynomial */
- unsigned long crc_poly;
- union {
- /* CRC calculated from the input data */
- unsigned long crc_result;
- /* First failed position to verify input data */
- unsigned long pos_verify;
- };
- /* CRC mirror flags */
- unsigned int bitmirr:1;
- unsigned int bytmirr:1;
- unsigned int w16swp:1;
- unsigned int fdsel:1;
- unsigned int rsltmirr:1;
- unsigned int polymirr:1;
- unsigned int cmpmirr:1;
-};
-
-/* Userspace interface */
-#define CRC_IOC_MAGIC 'C'
-#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int)
-#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int)
-#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int)
-#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int)
-
-
-#ifdef __KERNEL__
-
-#include <linux/types.h>
-#include <linux/spinlock.h>
-#include <linux/miscdevice.h>
-
-struct crc_register {
- u32 control;
- u32 datacnt;
- u32 datacntrld;
- u32 __pad_1[2];
- u32 compare;
- u32 fillval;
- u32 datafifo;
- u32 intren;
- u32 intrenset;
- u32 intrenclr;
- u32 poly;
- u32 __pad_2[4];
- u32 status;
- u32 datacntcap;
- u32 __pad_3;
- u32 result;
- u32 curresult;
- u32 __pad_4[3];
- u32 revid;
-};
-
-/* CRC_STATUS Masks */
-#define CMPERR 0x00000002 /* Compare error */
-#define DCNTEXP 0x00000010 /* datacnt register expired */
-#define IBR 0x00010000 /* Input buffer ready */
-#define OBR 0x00020000 /* Output buffer ready */
-#define IRR 0x00040000 /* Immediate result readt */
-#define LUTDONE 0x00080000 /* Look-up table generation done */
-#define FSTAT 0x00700000 /* FIFO status */
-#define MAX_FIFO 4 /* Max fifo size */
-
-/* CRC_CONTROL Masks */
-#define BLKEN 0x00000001 /* Block enable */
-#define OPMODE 0x000000F0 /* Operation mode */
-#define OPMODE_OFFSET 4 /* Operation mode mask offset*/
-#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */
-#define MODE_DATA_FILL 2 /* MTM data fill */
-#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */
-#define MODE_DATA_VERIFY 4 /* MSM data verify */
-#define AUTOCLRZ 0x00000100 /* Auto clear to zero */
-#define AUTOCLRF 0x00000200 /* Auto clear to one */
-#define OBRSTALL 0x00001000 /* Stall on output buffer ready */
-#define IRRSTALL 0x00002000 /* Stall on immediate result ready */
-#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */
-#define BITMIRR_OFFSET 16 /* Mirror bits offset */
-#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */
-#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */
-#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */
-#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */
-#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */
-#define FDSEL_OFFSET 19 /* Mirror FIFO offset */
-#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */
-#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */
-#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */
-#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */
-#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */
-#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */
-
-/* CRC_INTREN Masks */
-#define CMPERRI 0x02 /* CRC_ERROR_INTR */
-#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */
-
-#endif
-
-#endif
#include <crypto/internal/hash.h>
#include <asm/blackfin.h>
-#include <asm/bfin_crc.h>
#include <asm/dma.h>
#include <asm/portmux.h>
+#include <asm/io.h>
+
+#include "bfin_crc.h"
#define CRC_CCRYPTO_QUEUE_LENGTH 5
int irq;
int dma_ch;
u32 poly;
- volatile struct crc_register *regs;
+ struct crc_register *regs;
struct ahash_request *req; /* current request in operation */
struct dma_desc_array *sg_cpu; /* virt addr of sg dma descriptors */
static int bfin_crypto_crc_init_hw(struct bfin_crypto_crc *crc, u32 key)
{
- crc->regs->datacntrld = 0;
- crc->regs->control = MODE_CALC_CRC << OPMODE_OFFSET;
- crc->regs->curresult = key;
+ writel(0, &crc->regs->datacntrld);
+ writel(MODE_CALC_CRC << OPMODE_OFFSET, &crc->regs->control);
+ writel(key, &crc->regs->curresult);
/* setup CRC interrupts */
- crc->regs->status = CMPERRI | DCNTEXPI;
- crc->regs->intrenset = CMPERRI | DCNTEXPI;
+ writel(CMPERRI | DCNTEXPI, &crc->regs->status);
+ writel(CMPERRI | DCNTEXPI, &crc->regs->intrenset);
return 0;
}
int nsg, i, j;
unsigned int nextlen;
unsigned long flags;
+ u32 reg;
spin_lock_irqsave(&crc->lock, flags);
if (req)
ctx->sg_buflen += CHKSUM_DIGEST_SIZE;
/* set CRC data count before start DMA */
- crc->regs->datacnt = ctx->sg_buflen >> 2;
+ writel(ctx->sg_buflen >> 2, &crc->regs->datacnt);
/* setup and enable CRC DMA */
bfin_crypto_crc_config_dma(crc);
/* finally kick off CRC operation */
- crc->regs->control |= BLKEN;
+ reg = readl(&crc->regs->control);
+ writel(reg | BLKEN, &crc->regs->control);
return -EINPROGRESS;
}
static irqreturn_t bfin_crypto_crc_handler(int irq, void *dev_id)
{
struct bfin_crypto_crc *crc = dev_id;
+ u32 reg;
- if (crc->regs->status & DCNTEXP) {
- crc->regs->status = DCNTEXP;
+ if (readl(&crc->regs->status) & DCNTEXP) {
+ writel(DCNTEXP, &crc->regs->status);
/* prepare results */
- put_unaligned_le32(crc->regs->result, crc->req->result);
+ put_unaligned_le32(readl(&crc->regs->result),
+ crc->req->result);
- crc->regs->control &= ~BLKEN;
+ reg = readl(&crc->regs->control);
+ writel(reg & ~BLKEN, &crc->regs->control);
crc->busy = 0;
if (crc->req->base.complete)
struct bfin_crypto_crc *crc = platform_get_drvdata(pdev);
int i = 100000;
- while ((crc->regs->control & BLKEN) && --i)
+ while ((readl(&crc->regs->control) & BLKEN) && --i)
cpu_relax();
if (i == 0)
*/
crc->sg_mid_buf = (u8 *)(crc->sg_cpu + ((CRC_MAX_DMA_DESC + 1) << 1));
- crc->regs->control = 0;
- crc->regs->poly = crc->poly = (u32)pdev->dev.platform_data;
+ writel(0, &crc->regs->control);
+ crc->poly = (u32)pdev->dev.platform_data;
+ writel(crc->poly, &crc->regs->poly);
- while (!(crc->regs->status & LUTDONE) && (--timeout) > 0)
+ while (!(readl(&crc->regs->status) & LUTDONE) && (--timeout) > 0)
cpu_relax();
if (timeout == 0)
--- /dev/null
+/*
+ * bfin_crc.h - interface to Blackfin CRC controllers
+ *
+ * Copyright 2012 Analog Devices Inc.
+ *
+ * Licensed under the GPL-2 or later.
+ */
+
+#ifndef __BFIN_CRC_H__
+#define __BFIN_CRC_H__
+
+/* Function driver which use hardware crc must initialize the structure */
+struct crc_info {
+ /* Input data address */
+ unsigned char *in_addr;
+ /* Output data address */
+ unsigned char *out_addr;
+ /* Input or output bytes */
+ unsigned long datasize;
+ union {
+ /* CRC to compare with that of input buffer */
+ unsigned long crc_compare;
+ /* Value to compare with input data */
+ unsigned long val_verify;
+ /* Value to fill */
+ unsigned long val_fill;
+ };
+ /* Value to program the 32b CRC Polynomial */
+ unsigned long crc_poly;
+ union {
+ /* CRC calculated from the input data */
+ unsigned long crc_result;
+ /* First failed position to verify input data */
+ unsigned long pos_verify;
+ };
+ /* CRC mirror flags */
+ unsigned int bitmirr:1;
+ unsigned int bytmirr:1;
+ unsigned int w16swp:1;
+ unsigned int fdsel:1;
+ unsigned int rsltmirr:1;
+ unsigned int polymirr:1;
+ unsigned int cmpmirr:1;
+};
+
+/* Userspace interface */
+#define CRC_IOC_MAGIC 'C'
+#define CRC_IOC_CALC_CRC _IOWR('C', 0x01, unsigned int)
+#define CRC_IOC_MEMCPY_CRC _IOWR('C', 0x02, unsigned int)
+#define CRC_IOC_VERIFY_VAL _IOWR('C', 0x03, unsigned int)
+#define CRC_IOC_FILL_VAL _IOWR('C', 0x04, unsigned int)
+
+
+#ifdef __KERNEL__
+
+#include <linux/types.h>
+#include <linux/spinlock.h>
+#include <linux/miscdevice.h>
+
+struct crc_register {
+ u32 control;
+ u32 datacnt;
+ u32 datacntrld;
+ u32 __pad_1[2];
+ u32 compare;
+ u32 fillval;
+ u32 datafifo;
+ u32 intren;
+ u32 intrenset;
+ u32 intrenclr;
+ u32 poly;
+ u32 __pad_2[4];
+ u32 status;
+ u32 datacntcap;
+ u32 __pad_3;
+ u32 result;
+ u32 curresult;
+ u32 __pad_4[3];
+ u32 revid;
+};
+
+/* CRC_STATUS Masks */
+#define CMPERR 0x00000002 /* Compare error */
+#define DCNTEXP 0x00000010 /* datacnt register expired */
+#define IBR 0x00010000 /* Input buffer ready */
+#define OBR 0x00020000 /* Output buffer ready */
+#define IRR 0x00040000 /* Immediate result readt */
+#define LUTDONE 0x00080000 /* Look-up table generation done */
+#define FSTAT 0x00700000 /* FIFO status */
+#define MAX_FIFO 4 /* Max fifo size */
+
+/* CRC_CONTROL Masks */
+#define BLKEN 0x00000001 /* Block enable */
+#define OPMODE 0x000000F0 /* Operation mode */
+#define OPMODE_OFFSET 4 /* Operation mode mask offset*/
+#define MODE_DMACPY_CRC 1 /* MTM CRC compute and compare */
+#define MODE_DATA_FILL 2 /* MTM data fill */
+#define MODE_CALC_CRC 3 /* MSM CRC compute and compare */
+#define MODE_DATA_VERIFY 4 /* MSM data verify */
+#define AUTOCLRZ 0x00000100 /* Auto clear to zero */
+#define AUTOCLRF 0x00000200 /* Auto clear to one */
+#define OBRSTALL 0x00001000 /* Stall on output buffer ready */
+#define IRRSTALL 0x00002000 /* Stall on immediate result ready */
+#define BITMIRR 0x00010000 /* Mirror bits within each byte of 32-bit input data */
+#define BITMIRR_OFFSET 16 /* Mirror bits offset */
+#define BYTMIRR 0x00020000 /* Mirror bytes of 32-bit input data */
+#define BYTMIRR_OFFSET 17 /* Mirror bytes offset */
+#define W16SWP 0x00040000 /* Mirror uppper and lower 16-bit word of 32-bit input data */
+#define W16SWP_OFFSET 18 /* Mirror 16-bit word offset */
+#define FDSEL 0x00080000 /* FIFO is written after input data is mirrored */
+#define FDSEL_OFFSET 19 /* Mirror FIFO offset */
+#define RSLTMIRR 0x00100000 /* CRC result registers are mirrored. */
+#define RSLTMIRR_OFFSET 20 /* Mirror CRC result offset. */
+#define POLYMIRR 0x00200000 /* CRC poly register is mirrored. */
+#define POLYMIRR_OFFSET 21 /* Mirror CRC poly offset. */
+#define CMPMIRR 0x00400000 /* CRC compare register is mirrored. */
+#define CMPMIRR_OFFSET 22 /* Mirror CRC compare offset. */
+
+/* CRC_INTREN Masks */
+#define CMPERRI 0x02 /* CRC_ERROR_INTR */
+#define DCNTEXPI 0x10 /* CRC_STATUS_INTR */
+
+#endif
+
+#endif
projects / cascardo / linux.git / commitdiff