net: phy: add interrupt support for aquantia phy

By implementing config_intr & ack_interrupt, now the phy can support
link connect/disconnect interrupt.

Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/aquantia.c b/drivers/net/phy/aquantia.c
index 73d347d..d6111af 100644 (file)
--- a/drivers/net/phy/aquantia.c
+++ b/drivers/net/phy/aquantia.c
@@ -44,6 +44,43 @@ static int aquantia_aneg_done(struct phy_device *phydev)
        return (reg < 0) ? reg : (reg & BMSR_ANEGCOMPLETE);
 }
 
+static int aquantia_config_intr(struct phy_device *phydev)
+{
+       int err;
+
+       if (phydev->interrupts == PHY_INTERRUPT_ENABLED) {
+               err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 1);
+               if (err < 0)
+                       return err;
+
+               err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 1);
+               if (err < 0)
+                       return err;
+
+               err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0x1001);
+       } else {
+               err = phy_write_mmd(phydev, MDIO_MMD_AN, 0xd401, 0);
+               if (err < 0)
+                       return err;
+
+               err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff00, 0);
+               if (err < 0)
+                       return err;
+
+               err = phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xff01, 0);
+       }
+
+       return err;
+}
+
+static int aquantia_ack_interrupt(struct phy_device *phydev)
+{
+       int reg;
+
+       reg = phy_read_mmd(phydev, MDIO_MMD_AN, 0xcc01);
+       return (reg < 0) ? reg : 0;
+}
+
 static int aquantia_read_status(struct phy_device *phydev)
 {
        int reg;
@@ -85,8 +122,11 @@ static struct phy_driver aquantia_driver[] = {
        .phy_id_mask    = 0xfffffff0,
        .name           = "Aquantia AQ1202",
        .features       = PHY_AQUANTIA_FEATURES,
+       .flags          = PHY_HAS_INTERRUPT,
        .aneg_done      = aquantia_aneg_done,
        .config_aneg    = aquantia_config_aneg,
+       .config_intr    = aquantia_config_intr,
+       .ack_interrupt  = aquantia_ack_interrupt,
        .read_status    = aquantia_read_status,
        .driver         = { .owner = THIS_MODULE,},
 },
@@ -95,8 +135,11 @@ static struct phy_driver aquantia_driver[] = {
        .phy_id_mask    = 0xfffffff0,
        .name           = "Aquantia AQ2104",
        .features       = PHY_AQUANTIA_FEATURES,
+       .flags          = PHY_HAS_INTERRUPT,
        .aneg_done      = aquantia_aneg_done,
        .config_aneg    = aquantia_config_aneg,
+       .config_intr    = aquantia_config_intr,
+       .ack_interrupt  = aquantia_ack_interrupt,
        .read_status    = aquantia_read_status,
        .driver         = { .owner = THIS_MODULE,},
 },
@@ -105,8 +148,11 @@ static struct phy_driver aquantia_driver[] = {
        .phy_id_mask    = 0xfffffff0,
        .name           = "Aquantia AQR105",
        .features       = PHY_AQUANTIA_FEATURES,
+       .flags          = PHY_HAS_INTERRUPT,
        .aneg_done      = aquantia_aneg_done,
        .config_aneg    = aquantia_config_aneg,
+       .config_intr    = aquantia_config_intr,
+       .ack_interrupt  = aquantia_ack_interrupt,
        .read_status    = aquantia_read_status,
        .driver         = { .owner = THIS_MODULE,},
 },
@@ -115,8 +161,11 @@ static struct phy_driver aquantia_driver[] = {
        .phy_id_mask    = 0xfffffff0,
        .name           = "Aquantia AQR405",
        .features       = PHY_AQUANTIA_FEATURES,
+       .flags          = PHY_HAS_INTERRUPT,
        .aneg_done      = aquantia_aneg_done,
        .config_aneg    = aquantia_config_aneg,
+       .config_intr    = aquantia_config_intr,
+       .ack_interrupt  = aquantia_ack_interrupt,
        .read_status    = aquantia_read_status,
        .driver         = { .owner = THIS_MODULE,},
 },