wl18xx: add register table

Add the register table with the appropriate values for wl18xx.

Signed-off-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>

diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c
index f3a164a..88fd934 100644 (file)
--- a/drivers/net/wireless/ti/wl18xx/main.c
+++ b/drivers/net/wireless/ti/wl18xx/main.c
@@ -25,6 +25,8 @@
 #include "../wlcore/wlcore.h"
 #include "../wlcore/debug.h"
 
+#include "reg.h"
+
 static struct wlcore_ops wl18xx_ops = {
 };
 
@@ -62,6 +64,26 @@ static const struct wlcore_partition_set wl18xx_ptable[PART_TABLE_LEN] = {
        },
 };
 
+static const int wl18xx_rtable[REG_TABLE_LEN] = {
+       [REG_ECPU_CONTROL]              = WL18XX_REG_ECPU_CONTROL,
+       [REG_INTERRUPT_NO_CLEAR]        = WL18XX_REG_INTERRUPT_NO_CLEAR,
+       [REG_INTERRUPT_ACK]             = WL18XX_REG_INTERRUPT_ACK,
+       [REG_COMMAND_MAILBOX_PTR]       = WL18XX_REG_COMMAND_MAILBOX_PTR,
+       [REG_EVENT_MAILBOX_PTR]         = WL18XX_REG_EVENT_MAILBOX_PTR,
+       [REG_INTERRUPT_TRIG]            = WL18XX_REG_INTERRUPT_TRIG_H,
+       [REG_INTERRUPT_MASK]            = WL18XX_REG_INTERRUPT_MASK,
+       [REG_PC_ON_RECOVERY]            = 0, /* TODO: where is the PC? */
+       [REG_CHIP_ID_B]                 = WL18XX_REG_CHIP_ID_B,
+       [REG_CMD_MBOX_ADDRESS]          = WL18XX_CMD_MBOX_ADDRESS,
+
+       /* data access memory addresses, used with partition translation */
+       [REG_SLV_MEM_DATA]              = WL18XX_SLV_MEM_DATA,
+       [REG_SLV_REG_DATA]              = WL18XX_SLV_REG_DATA,
+
+       /* raw data access memory addresses */
+       [REG_RAW_FW_STATUS_ADDR]        = WL18XX_FW_STATUS_ADDR,
+};
+
 int __devinit wl18xx_probe(struct platform_device *pdev)
 {
        struct wl1271 *wl;
@@ -76,6 +98,7 @@ int __devinit wl18xx_probe(struct platform_device *pdev)
        wl = hw->priv;
        wl->ops = &wl18xx_ops;
        wl->ptable = wl18xx_ptable;
+       wl->rtable = wl18xx_rtable;
 
        return wlcore_probe(wl, pdev);
 }

diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h
new file mode 100644 (file)
index 0000000..9af0c83
--- /dev/null
+++ b/drivers/net/wireless/ti/wl18xx/reg.h
@@ -0,0 +1,112 @@
+/*
+ * This file is part of wlcore
+ *
+ * Copyright (C) 2011 Texas Instruments Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __REG_H__
+#define __REG_H__
+
+#define WL18XX_REGISTERS_BASE      0x00800000
+#define WL18XX_CODE_BASE           0x00000000
+#define WL18XX_DATA_BASE           0x00400000
+#define WL18XX_DOUBLE_BUFFER_BASE  0x00600000
+#define WL18XX_MCU_KEY_SEARCH_BASE 0x00700000
+#define WL18XX_PHY_BASE            0x00900000
+#define WL18XX_TOP_OCP_BASE        0x00A00000
+#define WL18XX_PACKET_RAM_BASE     0x00B00000
+#define WL18XX_HOST_BASE           0x00C00000
+
+#define WL18XX_REGISTERS_DOWN_SIZE 0x0000B000
+
+#define WL18XX_REG_BOOT_PART_START 0x00802000
+#define WL18XX_REG_BOOT_PART_SIZE  0x00014578
+
+#define WL18XX_PHY_INIT_MEM_ADDR   0x80926000
+
+#define WL18XX_SDIO_WSPI_BASE          (WL18XX_REGISTERS_BASE)
+#define WL18XX_REG_CONFIG_BASE         (WL18XX_REGISTERS_BASE + 0x02000)
+#define WL18XX_WGCM_REGS_BASE          (WL18XX_REGISTERS_BASE + 0x03000)
+#define WL18XX_ENC_BASE                        (WL18XX_REGISTERS_BASE + 0x04000)
+#define WL18XX_INTERRUPT_BASE          (WL18XX_REGISTERS_BASE + 0x05000)
+#define WL18XX_UART_BASE               (WL18XX_REGISTERS_BASE + 0x06000)
+#define WL18XX_WELP_BASE               (WL18XX_REGISTERS_BASE + 0x07000)
+#define WL18XX_TCP_CKSM_BASE           (WL18XX_REGISTERS_BASE + 0x08000)
+#define WL18XX_FIFO_BASE               (WL18XX_REGISTERS_BASE + 0x09000)
+#define WL18XX_OCP_BRIDGE_BASE         (WL18XX_REGISTERS_BASE + 0x0A000)
+#define WL18XX_PMAC_RX_BASE            (WL18XX_REGISTERS_BASE + 0x14800)
+#define WL18XX_PMAC_ACM_BASE           (WL18XX_REGISTERS_BASE + 0x14C00)
+#define WL18XX_PMAC_TX_BASE            (WL18XX_REGISTERS_BASE + 0x15000)
+#define WL18XX_PMAC_CSR_BASE           (WL18XX_REGISTERS_BASE + 0x15400)
+
+#define WL18XX_REG_ECPU_CONTROL                (WL18XX_REGISTERS_BASE + 0x02004)
+#define WL18XX_REG_INTERRUPT_NO_CLEAR  (WL18XX_REGISTERS_BASE + 0x050E8)
+#define WL18XX_REG_INTERRUPT_ACK       (WL18XX_REGISTERS_BASE + 0x050F0)
+#define WL18XX_REG_INTERRUPT_TRIG      (WL18XX_REGISTERS_BASE + 0x5074)
+#define WL18XX_REG_INTERRUPT_TRIG_H    (WL18XX_REGISTERS_BASE + 0x5078)
+#define WL18XX_REG_INTERRUPT_MASK      (WL18XX_REGISTERS_BASE + 0x0050DC)
+
+#define WL18XX_REG_CHIP_ID_B           (WL18XX_REGISTERS_BASE + 0x01542C)
+
+#define WL18XX_SLV_MEM_DATA            (WL18XX_HOST_BASE + 0x0018)
+#define WL18XX_SLV_REG_DATA            (WL18XX_HOST_BASE + 0x0008)
+
+/* Scratch Pad registers*/
+#define WL18XX_SCR_PAD0                        (WL18XX_REGISTERS_BASE + 0x0154EC)
+#define WL18XX_SCR_PAD1                        (WL18XX_REGISTERS_BASE + 0x0154F0)
+#define WL18XX_SCR_PAD2                        (WL18XX_REGISTERS_BASE + 0x0154F4)
+#define WL18XX_SCR_PAD3                        (WL18XX_REGISTERS_BASE + 0x0154F8)
+#define WL18XX_SCR_PAD4                        (WL18XX_REGISTERS_BASE + 0x0154FC)
+#define WL18XX_SCR_PAD4_SET            (WL18XX_REGISTERS_BASE + 0x015504)
+#define WL18XX_SCR_PAD4_CLR            (WL18XX_REGISTERS_BASE + 0x015500)
+#define WL18XX_SCR_PAD5                        (WL18XX_REGISTERS_BASE + 0x015508)
+#define WL18XX_SCR_PAD5_SET            (WL18XX_REGISTERS_BASE + 0x015510)
+#define WL18XX_SCR_PAD5_CLR            (WL18XX_REGISTERS_BASE + 0x01550C)
+#define WL18XX_SCR_PAD6                        (WL18XX_REGISTERS_BASE + 0x015514)
+#define WL18XX_SCR_PAD7                        (WL18XX_REGISTERS_BASE + 0x015518)
+#define WL18XX_SCR_PAD8                        (WL18XX_REGISTERS_BASE + 0x01551C)
+#define WL18XX_SCR_PAD9                        (WL18XX_REGISTERS_BASE + 0x015520)
+
+/* Spare registers*/
+#define WL18XX_SPARE_A1                        (WL18XX_REGISTERS_BASE + 0x002194)
+#define WL18XX_SPARE_A2                        (WL18XX_REGISTERS_BASE + 0x002198)
+#define WL18XX_SPARE_A3                        (WL18XX_REGISTERS_BASE + 0x00219C)
+#define WL18XX_SPARE_A4                        (WL18XX_REGISTERS_BASE + 0x0021A0)
+#define WL18XX_SPARE_A5                        (WL18XX_REGISTERS_BASE + 0x0021A4)
+#define WL18XX_SPARE_A6                        (WL18XX_REGISTERS_BASE + 0x0021A8)
+#define WL18XX_SPARE_A7                        (WL18XX_REGISTERS_BASE + 0x0021AC)
+#define WL18XX_SPARE_A8                        (WL18XX_REGISTERS_BASE + 0x0021B0)
+#define WL18XX_SPARE_B1                        (WL18XX_REGISTERS_BASE + 0x015524)
+#define WL18XX_SPARE_B2                        (WL18XX_REGISTERS_BASE + 0x015528)
+#define WL18XX_SPARE_B3                        (WL18XX_REGISTERS_BASE + 0x01552C)
+#define WL18XX_SPARE_B4                        (WL18XX_REGISTERS_BASE + 0x015530)
+#define WL18XX_SPARE_B5                        (WL18XX_REGISTERS_BASE + 0x015534)
+#define WL18XX_SPARE_B6                        (WL18XX_REGISTERS_BASE + 0x015538)
+#define WL18XX_SPARE_B7                        (WL18XX_REGISTERS_BASE + 0x01553C)
+#define WL18XX_SPARE_B8                        (WL18XX_REGISTERS_BASE + 0x015540)
+
+#define WL18XX_REG_COMMAND_MAILBOX_PTR (WL18XX_SCR_PAD0)
+#define WL18XX_REG_EVENT_MAILBOX_PTR   (WL18XX_SCR_PAD1)
+
+#define WL18XX_CMD_MBOX_ADDRESS                0xB007B4
+
+#define WL18XX_FW_STATUS_ADDR          0x50F8
+
+#define CHIP_ID_185x_PG10              (0x06030101)
+
+#endif /* __REG_H__ */