* 'v3.5-samsung-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: EXYNOS: Fix EXYNOS_DEV_DMA Kconfig entry
ARM: SAMSUNG: Fix for S3C2412 EBI memory mapping
ARM: SAMSUNG: Should check for IS_ERR(clk) instead of NULL
Uwe Kleine-König <ukl@pengutronix.de>
Uwe Kleine-König <Uwe.Kleine-Koenig@digi.com>
Valdis Kletnieks <Valdis.Kletnieks@vt.edu>
+Viresh Kumar <viresh.linux@gmail.com> <viresh.kumar@st.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_scale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_scale
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_scale
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_scale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_peak_scale
What: /sys/bus/iio/devices/iio:deviceX/in_anglvel_scale
What: /sys/.../iio:deviceX/in_voltageX_scale_available
What: /sys/.../iio:deviceX/in_voltage-voltage_scale_available
What: /sys/.../iio:deviceX/out_voltageX_scale_available
+What: /sys/.../iio:deviceX/out_altvoltageX_scale_available
What: /sys/.../iio:deviceX/in_capacitance_scale_available
KernelVersion: 2.635
Contact: linux-iio@vger.kernel.org
gives the 3dB frequency of the filter in Hz.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
Raw (unscaled, no bias etc.) output voltage for
channel Y. The number must always be specified and
unique if the output corresponds to a single channel.
+ While DAC like devices typically use out_voltage,
+ a continuous frequency generating device, such as
+ a DDS or PLL should use out_altvoltage.
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY&Z_raw
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY&Z_raw
KernelVersion: 2.6.37
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown_mode
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown_mode
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown_mode
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/.../iio:deviceX/out_votlageY_powerdown_mode_available
What: /sys/.../iio:deviceX/out_voltage_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvotlageY_powerdown_mode_available
+What: /sys/.../iio:deviceX/out_altvoltage_powerdown_mode_available
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_powerdown
What: /sys/bus/iio/devices/iio:deviceX/out_voltage_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_powerdown
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltage_powerdown
KernelVersion: 2.6.38
Contact: linux-iio@vger.kernel.org
Description:
normal operation. Y may be suppressed if all outputs are
controlled together.
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_frequency
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Output frequency for channel Y in Hz. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_altvoltageY_phase
+KernelVersion: 3.4.0
+Contact: linux-iio@vger.kernel.org
+Description:
+ Phase in radians of one frequency/clock output Y
+ (out_altvoltageY) relative to another frequency/clock output
+ (out_altvoltageZ) of the device X. The number must always be
+ specified and unique if the output corresponds to a single
+ channel.
+
What: /sys/bus/iio/devices/iio:deviceX/events
KernelVersion: 2.6.35
Contact: linux-iio@vger.kernel.org
Document Author
---------------
- Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics
+ Viresh Kumar <viresh.linux@gmail.com>, (c) 2010-2012 ST Microelectronics
Prefix: 'coretemp'
CPUID: family 0x6, models 0xe (Pentium M DC), 0xf (Core 2 DC 65nm),
0x16 (Core 2 SC 65nm), 0x17 (Penryn 45nm),
- 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield)
+ 0x1a (Nehalem), 0x1c (Atom), 0x1e (Lynnfield),
+ 0x26 (Tunnel Creek Atom), 0x27 (Medfield Atom),
+ 0x36 (Cedar Trail Atom)
Datasheet: Intel 64 and IA-32 Architectures Software Developer's Manual
Volume 3A: System Programming Guide
http://softwarecommunity.intel.com/Wiki/Mobility/720.htm
Process Processor TjMax(C)
+22nm Core i5/i7 Processors
+ i7 3920XM, 3820QM, 3720QM, 3667U, 3520M 105
+ i5 3427U, 3360M/3320M 105
+ i7 3770/3770K 105
+ i5 3570/3570K, 3550, 3470/3450 105
+ i7 3770S 103
+ i5 3570S/3550S, 3475S/3470S/3450S 103
+ i7 3770T 94
+ i5 3570T 94
+ i5 3470T 91
+
32nm Core i3/i5/i7 Processors
i7 660UM/640/620, 640LM/620, 620M, 610E 105
i5 540UM/520/430, 540M/520/450/430 105
U3400 105
P4505/P4500 90
+32nm Atom Processors
+ Z2460 90
+ D2700/2550/2500 100
+ N2850/2800/2650/2600 100
+
45nm Xeon Processors 5400 Quad-Core
X5492, X5482, X5472, X5470, X5460, X5450 85
E5472, E5462, E5450/40/30/20/10/05 85
N475/470/455/450 100
N280/270 90
330/230 125
+ E680/660/640/620 90
+ E680T/660T/640T/620T 110
45nm Core2 Processors
Solo ULV SU3500/3300 100
F: net/appletalk/
ARASAN COMPACT FLASH PATA CONTROLLER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: linux-ide@vger.kernel.org
S: Maintained
F: include/linux/pata_arasan_cf_data.h
F: drivers/pinctrl/
PIN CONTROLLER - ST SPEAR
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: drivers/tty/serial
SYNOPSYS DESIGNWARE DMAC DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
S: Maintained
F: include/linux/dw_dmac.h
F: drivers/dma/dw_dmac_regs.h
F: drivers/mmc/host/sdhci-s3c.c
SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) ST SPEAR DRIVER
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-mmc@vger.kernel.org
S: Maintained
F: include/linux/compiler.h
SPEAR PLATFORM SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/plat-spear/
SPEAR13XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: arch/arm/mach-spear13xx/
SPEAR3XX MACHINE SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
SPEAR6XX MACHINE SUPPORT
M: Rajeev Kumar <rajeev-dlh.kumar@st.com>
M: Shiraz Hashim <shiraz.hashim@st.com>
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
F: arch/arm/mach-spear6xx/
SPEAR CLOCK FRAMEWORK SUPPORT
-M: Viresh Kumar <viresh.kumar@st.com>
+M: Viresh Kumar <viresh.linux@gmail.com>
L: spear-devel@list.st.com
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://www.st.com/spear
VME SUBSYSTEM
M: Martyn Welch <martyn.welch@ge.com>
-M: Manohar Vanga <manohar.vanga@cern.ch>
+M: Manohar Vanga <manohar.vanga@gmail.com>
M: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
L: devel@driverdev.osuosl.org
S: Maintained
VERSION = 3
PATCHLEVEL = 5
SUBLEVEL = 0
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc4
NAME = Saber-toothed Squirrel
# *DOCUMENTATION*
KBUILD_CFLAGS += -O2
endif
+include $(srctree)/arch/$(SRCARCH)/Makefile
+
ifdef CONFIG_READABLE_ASM
# Disable optimizations that make assembler listings hard to read.
# reorder blocks reorders the control in the function
$(call cc-option,-fno-partial-inlining)
endif
-include $(srctree)/arch/$(SRCARCH)/Makefile
-
ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
select ICST
select GENERIC_CLOCKEVENTS
select ARCH_WANT_OPTIONAL_GPIOLIB
+ select NEED_MACH_IO_H if PCI
select PLAT_VERSATILE
select PLAT_VERSATILE_CLCD
select PLAT_VERSATILE_FPGA_IRQ
select PCI
select ARCH_REQUIRE_GPIOLIB
select GENERIC_CLOCKEVENTS
+ select NEED_MACH_IO_H
select PLAT_ORION
help
Support for the following Marvell Orion 5x series SoCs:
/include/ "mmp2.dtsi"
/ {
- model = "Marvell MMP2 Aspenite Development Board";
+ model = "Marvell MMP2 Brownstone Development Board";
compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2";
chosen {
};
memory {
- reg = <0x00000000 0x04000000>;
+ reg = <0x00000000 0x08000000>;
};
soc {
compatible = "ti,omap2-intc";
interrupt-controller;
#interrupt-cells = <1>;
+ ti,intc-size = <96>;
+ reg = <0x480FE000 0x1000>;
};
uart1: serial@4806a000 {
/*
* DTS file for SPEAr1310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1310 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr1340 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr1340 SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr13xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr300 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr310 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 Evaluation Baord
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for SPEAr320 SoC
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
/*
* DTS file for all SPEAr3xx SoCs
*
- * Copyright 2012 Viresh Kumar <viresh.kumar@st.com>
+ * Copyright 2012 Viresh Kumar <viresh.linux@gmail.com>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
" .long 1b, 4f, 2b, 4f\n" \
" .popsection\n" \
" .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
"4: mov %0, " err_reg "\n" \
" b 3b\n" \
" .popsection"
* ARM PrimeXsys System Controller SP810 header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* The out of line fixup for the ldrt above.
*/
.pushsection .fixup, "ax"
+ .align 2
4: mov pc, r9
.popsection
.pushsection __ex_table,"a"
/* LDRSB (literal) 1111 1001 x001 1111 xxxx xxxx xxxx xxxx */
/* LDRH (literal) 1111 1000 x011 1111 xxxx xxxx xxxx xxxx */
/* LDRSH (literal) 1111 1001 x011 1111 xxxx xxxx xxxx xxxx */
- DECODE_EMULATEX (0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
+ DECODE_SIMULATEX(0xfe5f0000, 0xf81f0000, t32_simulate_ldr_literal,
REGS(PC, NOSPPCX, 0, 0, 0)),
/* STRB (immediate) 1111 1000 0000 xxxx xxxx 1xxx xxxx xxxx */
-obj-y := clock.o highbank.o system.o
+obj-y := clock.o highbank.o system.o smc.o
+
+plus_sec := $(call as-instr,.arch_extension sec,+sec)
+AFLAGS_smc.o :=-Wa,-march=armv7-a$(plus_sec)
+
obj-$(CONFIG_DEBUG_HIGHBANK_UART) += lluart.o
obj-$(CONFIG_SMP) += platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
static inline void highbank_lluart_map_io(void) {}
#endif
+extern void highbank_smc1(int fn, int arg);
{}
};
+#ifdef CONFIG_CACHE_L2X0
+static void highbank_l2x0_disable(void)
+{
+ /* Disable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x0);
+}
+#endif
+
static void __init highbank_init_irq(void)
{
of_irq_init(irq_match);
+
+#ifdef CONFIG_CACHE_L2X0
+ /* Enable PL310 L2 Cache controller */
+ highbank_smc1(0x102, 0x1);
l2x0_of_init(0, ~0UL);
+ outer_cache.disable = highbank_l2x0_disable;
+#endif
}
static void __init highbank_timer_init(void)
--- /dev/null
+/*
+ * Copied from omap44xx-smc.S Copyright (C) 2010 Texas Instruments, Inc.
+ * Copyright 2012 Calxeda, Inc.
+ *
+ * This program is free software,you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/linkage.h>
+
+/*
+ * This is common routine to manage secure monitor API
+ * used to modify the PL310 secure registers.
+ * 'r0' contains the value to be modified and 'r12' contains
+ * the monitor API number.
+ * Function signature : void highbank_smc1(u32 fn, u32 arg)
+ */
+
+ENTRY(highbank_smc1)
+ stmfd sp!, {r4-r11, lr}
+ mov r12, r0
+ mov r0, r1
+ dsb
+ smc #0
+ ldmfd sp!, {r4-r11, pc}
+ENDPROC(highbank_smc1)
select IMX_HAVE_PLATFORM_IMX2_WDT
select IMX_HAVE_PLATFORM_IMX_I2C
select IMX_HAVE_PLATFORM_IMX_KEYPAD
+ select IMX_HAVE_PLATFORM_IMX_SSI
select IMX_HAVE_PLATFORM_IMX_UART
select IMX_HAVE_PLATFORM_IPU_CORE
select IMX_HAVE_PLATFORM_MXC_EHCI
clk_register_clkdev(clk[clk32], NULL, "mxc_rtc.0");
clk_register_clkdev(clk[clko], "clko", NULL);
- mxc_timer_init(NULL, MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR),
- MX1_TIM1_INT);
+ mxc_timer_init(MX1_IO_ADDRESS(MX1_TIM1_BASE_ADDR), MX1_TIM1_INT);
return 0;
}
clk_register_clkdev(clk[sdhc1_ipg_gate], "sdhc1", NULL);
clk_register_clkdev(clk[sdhc2_ipg_gate], "sdhc2", NULL);
- mxc_timer_init(NULL, MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR),
- MX21_INT_GPT1);
+ mxc_timer_init(MX21_IO_ADDRESS(MX21_GPT1_BASE_ADDR), MX21_INT_GPT1);
+
return 0;
}
clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma");
clk_register_clkdev(clk[iim_ipg], "iim", NULL);
- mxc_timer_init(NULL, MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
+ mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54);
return 0;
}
clk_register_clkdev(clk[ssi1_baud_gate], "bitrate" , "imx-ssi.0");
clk_register_clkdev(clk[ssi2_baud_gate], "bitrate" , "imx-ssi.1");
- mxc_timer_init(NULL, MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR),
- MX27_INT_GPT1);
+ mxc_timer_init(MX27_IO_ADDRESS(MX27_GPT1_BASE_ADDR), MX27_INT_GPT1);
clk_prepare_enable(clk[emi_ahb_gate]);
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(NULL, MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR),
- MX31_INT_GPT);
+ mxc_timer_init(MX31_IO_ADDRESS(MX31_GPT1_BASE_ADDR), MX31_INT_GPT);
return 0;
}
imx_print_silicon_rev("i.MX35", mx35_revision());
#ifdef CONFIG_MXC_USE_EPIT
- epit_timer_init(&epit1_clk,
- MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
+ epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(NULL, MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR),
- MX35_INT_GPT);
+ mxc_timer_init(MX35_IO_ADDRESS(MX35_GPT1_BASE_ADDR), MX35_INT_GPT);
#endif
return 0;
periph_apm_sel, ARRAY_SIZE(periph_apm_sel));
clk[main_bus] = imx_clk_mux("main_bus", MXC_CCM_CBCDR, 25, 1,
main_bus_sel, ARRAY_SIZE(main_bus_sel));
- clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCDR, 1, 1,
+ clk[per_lp_apm] = imx_clk_mux("per_lp_apm", MXC_CCM_CBCMR, 1, 1,
per_lp_apm_sel, ARRAY_SIZE(per_lp_apm_sel));
clk[per_pred1] = imx_clk_divider("per_pred1", "per_lp_apm", MXC_CCM_CBCDR, 6, 2);
clk[per_pred2] = imx_clk_divider("per_pred2", "per_pred1", MXC_CCM_CBCDR, 3, 3);
clk[per_podf] = imx_clk_divider("per_podf", "per_pred2", MXC_CCM_CBCDR, 0, 3);
- clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCDR, 1, 0,
+ clk[per_root] = imx_clk_mux("per_root", MXC_CCM_CBCMR, 0, 1,
per_root_sel, ARRAY_SIZE(per_root_sel));
clk[ahb] = imx_clk_divider("ahb", "main_bus", MXC_CCM_CBCDR, 10, 3);
clk[ahb_max] = imx_clk_gate2("ahb_max", "ahb", MXC_CCM_CCGR0, 28);
clk[pwm1_hf_gate] = imx_clk_gate2("pwm1_hf_gate", "ipg", MXC_CCM_CCGR2, 12);
clk[pwm2_ipg_gate] = imx_clk_gate2("pwm2_ipg_gate", "ipg", MXC_CCM_CCGR2, 14);
clk[pwm2_hf_gate] = imx_clk_gate2("pwm2_hf_gate", "ipg", MXC_CCM_CCGR2, 16);
- clk[gpt_gate] = imx_clk_gate2("gpt_gate", "ipg", MXC_CCM_CCGR2, 18);
+ clk[gpt_gate] = imx_clk_gate2("gpt_gate", "per_root", MXC_CCM_CCGR2, 18);
clk[fec_gate] = imx_clk_gate2("fec_gate", "ipg", MXC_CCM_CCGR2, 24);
clk[usboh3_gate] = imx_clk_gate2("usboh3_gate", "ipg", MXC_CCM_CCGR2, 26);
clk[usboh3_per_gate] = imx_clk_gate2("usboh3_per_gate", "usboh3_podf", MXC_CCM_CCGR2, 28);
clk_set_rate(clk[esdhc_b_podf], 166250000);
/* System timer */
- mxc_timer_init(NULL, MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR),
- MX51_INT_GPT);
+ mxc_timer_init(MX51_IO_ADDRESS(MX51_GPT1_BASE_ADDR), MX51_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX51", mx51_revision());
clk_set_rate(clk[esdhc_b_podf], 200000000);
/* System timer */
- mxc_timer_init(NULL, MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR),
- MX53_INT_GPT);
+ mxc_timer_init(MX53_IO_ADDRESS(MX53_GPT1_BASE_ADDR), MX53_INT_GPT);
clk_prepare_enable(clk[iim_gate]);
imx_print_silicon_rev("i.MX53", mx53_revision());
"dummy", "axi", "enfc", "ipu1_di0", "ipu1_di1", "ipu2_di0",
"ipu2_di1", "ahb", "ipg", "ipg_per", "ckil", "pll4_audio", };
-static const char * const clks_init_on[] __initconst = {
- "mmdc_ch0_axi", "mmdc_ch1_axi", "usboh3",
-};
-
enum mx6q_clks {
dummy, ckil, ckih, osc, pll2_pfd0_352m, pll2_pfd1_594m, pll2_pfd2_396m,
pll3_pfd0_720m, pll3_pfd1_540m, pll3_pfd2_508m, pll3_pfd3_454m,
ssi2, ssi3, uart_ipg, uart_serial, usboh3, usdhc1, usdhc2, usdhc3,
usdhc4, vdo_axi, vpu_axi, cko1, pll1_sys, pll2_bus, pll3_usb_otg,
pll4_audio, pll5_video, pll6_mlb, pll7_usb_host, pll8_enet, ssi1_ipg,
- ssi2_ipg, ssi3_ipg, clk_max
+ ssi2_ipg, ssi3_ipg, rom,
+ clk_max
};
static struct clk *clk[clk_max];
+static enum mx6q_clks const clks_init_on[] __initconst = {
+ mmdc_ch0_axi, rom,
+};
+
int __init mx6q_clocks_init(void)
{
struct device_node *np;
void __iomem *base;
- struct clk *c;
int i, irq;
clk[dummy] = imx_clk_fixed("dummy", 0);
clk[gpmi_bch] = imx_clk_gate2("gpmi_bch", "usdhc4", base + 0x78, 26);
clk[gpmi_io] = imx_clk_gate2("gpmi_io", "enfc", base + 0x78, 28);
clk[gpmi_apb] = imx_clk_gate2("gpmi_apb", "usdhc3", base + 0x78, 30);
+ clk[rom] = imx_clk_gate2("rom", "ahb", base + 0x7c, 0);
clk[sata] = imx_clk_gate2("sata", "ipg", base + 0x7c, 4);
clk[sdma] = imx_clk_gate2("sdma", "ahb", base + 0x7c, 6);
clk[spba] = imx_clk_gate2("spba", "ipg", base + 0x7c, 12);
clk_register_clkdev(clk[ahb], "ahb", NULL);
clk_register_clkdev(clk[cko1], "cko1", NULL);
- for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) {
- c = clk_get_sys(clks_init_on[i], NULL);
- if (IS_ERR(c)) {
- pr_err("%s: failed to get clk %s", __func__,
- clks_init_on[i]);
- return PTR_ERR(c);
- }
- clk_prepare_enable(c);
- }
+ for (i = 0; i < ARRAY_SIZE(clks_init_on); i++)
+ clk_prepare_enable(clk[clks_init_on[i]]);
np = of_find_compatible_node(NULL, NULL, "fsl,imx6q-gpt");
base = of_iomap(np, 0);
WARN_ON(!base);
irq = irq_of_parse_and_map(np, 0);
- mxc_timer_init(NULL, base, irq);
+ mxc_timer_init(base, irq);
return 0;
}
void __iomem *base;
};
-static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+static unsigned long __clk_pllv2_recalc_rate(unsigned long parent_rate,
+ u32 dp_ctl, u32 dp_op, u32 dp_mfd, u32 dp_mfn)
{
long mfi, mfn, mfd, pdf, ref_clk, mfn_abs;
- unsigned long dp_op, dp_mfd, dp_mfn, dp_ctl, pll_hfsm, dbl;
- void __iomem *pllbase;
+ unsigned long dbl;
s64 temp;
- struct clk_pllv2 *pll = to_clk_pllv2(hw);
-
- pllbase = pll->base;
- dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
dbl = dp_ctl & MXC_PLL_DP_CTL_DPDCK0_2_EN;
- if (pll_hfsm == 0) {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
- } else {
- dp_op = __raw_readl(pllbase + MXC_PLL_DP_HFS_OP);
- dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFD);
- dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_HFS_MFN);
- }
pdf = dp_op & MXC_PLL_DP_OP_PDF_MASK;
mfi = (dp_op & MXC_PLL_DP_OP_MFI_MASK) >> MXC_PLL_DP_OP_MFI_OFFSET;
mfi = (mfi <= 5) ? 5 : mfi;
return temp;
}
-static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+static unsigned long clk_pllv2_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
+ u32 dp_op, dp_mfd, dp_mfn, dp_ctl;
+ void __iomem *pllbase;
struct clk_pllv2 *pll = to_clk_pllv2(hw);
+
+ pllbase = pll->base;
+
+ dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
+ dp_op = __raw_readl(pllbase + MXC_PLL_DP_OP);
+ dp_mfd = __raw_readl(pllbase + MXC_PLL_DP_MFD);
+ dp_mfn = __raw_readl(pllbase + MXC_PLL_DP_MFN);
+
+ return __clk_pllv2_recalc_rate(parent_rate, dp_ctl, dp_op, dp_mfd, dp_mfn);
+}
+
+static int __clk_pllv2_set_rate(unsigned long rate, unsigned long parent_rate,
+ u32 *dp_op, u32 *dp_mfd, u32 *dp_mfn)
+{
u32 reg;
- void __iomem *pllbase;
long mfi, pdf, mfn, mfd = 999999;
s64 temp64;
unsigned long quad_parent_rate;
- unsigned long pll_hfsm, dp_ctl;
-
- pllbase = pll->base;
quad_parent_rate = 4 * parent_rate;
pdf = mfi = -1;
return -EINVAL;
pdf--;
- temp64 = rate * (pdf+1) - quad_parent_rate * mfi;
- do_div(temp64, quad_parent_rate/1000000);
+ temp64 = rate * (pdf + 1) - quad_parent_rate * mfi;
+ do_div(temp64, quad_parent_rate / 1000000);
mfn = (long)temp64;
+ reg = mfi << 4 | pdf;
+
+ *dp_op = reg;
+ *dp_mfd = mfd;
+ *dp_mfn = mfn;
+
+ return 0;
+}
+
+static int clk_pllv2_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_pllv2 *pll = to_clk_pllv2(hw);
+ void __iomem *pllbase;
+ u32 dp_ctl, dp_op, dp_mfd, dp_mfn;
+ int ret;
+
+ pllbase = pll->base;
+
+
+ ret = __clk_pllv2_set_rate(rate, parent_rate, &dp_op, &dp_mfd, &dp_mfn);
+ if (ret)
+ return ret;
+
dp_ctl = __raw_readl(pllbase + MXC_PLL_DP_CTL);
/* use dpdck0_2 */
__raw_writel(dp_ctl | 0x1000L, pllbase + MXC_PLL_DP_CTL);
- pll_hfsm = dp_ctl & MXC_PLL_DP_CTL_HFSM;
- if (pll_hfsm == 0) {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_MFN);
- } else {
- reg = mfi << 4 | pdf;
- __raw_writel(reg, pllbase + MXC_PLL_DP_HFS_OP);
- __raw_writel(mfd, pllbase + MXC_PLL_DP_HFS_MFD);
- __raw_writel(mfn, pllbase + MXC_PLL_DP_HFS_MFN);
- }
+
+ __raw_writel(dp_op, pllbase + MXC_PLL_DP_OP);
+ __raw_writel(dp_mfd, pllbase + MXC_PLL_DP_MFD);
+ __raw_writel(dp_mfn, pllbase + MXC_PLL_DP_MFN);
return 0;
}
static long clk_pllv2_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *prate)
{
- return rate;
+ u32 dp_op, dp_mfd, dp_mfn;
+
+ __clk_pllv2_set_rate(rate, *prate, &dp_op, &dp_mfd, &dp_mfn);
+ return __clk_pllv2_recalc_rate(*prate, MXC_PLL_DP_CTL_DPDCK0_2_EN,
+ dp_op, dp_mfd, dp_mfn);
}
static int clk_pllv2_prepare(struct clk_hw *hw)
#define MX53_DPLL1_BASE MX53_IO_ADDRESS(MX53_PLL1_BASE_ADDR)
#define MX53_DPLL2_BASE MX53_IO_ADDRESS(MX53_PLL2_BASE_ADDR)
#define MX53_DPLL3_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
-#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL3_BASE_ADDR)
+#define MX53_DPLL4_BASE MX53_IO_ADDRESS(MX53_PLL4_BASE_ADDR)
/* PLL Register Offsets */
#define MXC_PLL_DP_CTL 0x00
#include <linux/errno.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <mach/common.h>
int platform_cpu_kill(unsigned int cpu)
return 1;
}
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+ asm volatile(
+ "mcr p15, 0, %1, c7, c5, 0\n"
+ " mcr p15, 0, %1, c7, c10, 4\n"
+ /*
+ * Turn off coherency
+ */
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, %3\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0), "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
+static inline void cpu_leave_lowpower(void)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+}
+
/*
* platform-specific code to shutdown a CPU
*
*/
void platform_cpu_die(unsigned int cpu)
{
- flush_cache_all();
+ cpu_enter_lowpower();
imx_enable_cpu(cpu, false);
cpu_do_idle();
+ cpu_leave_lowpower();
/* We should never return from idle */
panic("cpu %d unexpectedly exit from shutdown\n", cpu);
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x48),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
.irq = IMX_GPIO_TO_IRQ(TSC2007_IRQGPIO),
},
I2C_BOARD_INFO("pcf8563", 0x51),
}, {
I2C_BOARD_INFO("tsc2007", 0x49),
- .type = "tsc2007",
.platform_data = &tsc2007_info,
},
};
PB23_PF_USB_PWR,
PB24_PF_USB_OC,
/* CSI */
+ TVP5150_RSTN | GPIO_GPIO | GPIO_OUT,
+ TVP5150_PWDN | GPIO_GPIO | GPIO_OUT,
PB10_PF_CSI_D0,
PB11_PF_CSI_D1,
PB12_PF_CSI_D2,
{ MOTHERBOARD_BIT2, GPIOF_IN, "mother-version-2" },
};
+static const struct gpio visstrim_m10_gpios[] __initconst = {
+ {
+ .gpio = TVP5150_RSTN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_HIGH,
+ .label = "tvp5150_rstn",
+ },
+ {
+ .gpio = TVP5150_PWDN,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "tvp5150_pwdn",
+ },
+ {
+ .gpio = OTG_PHY_CS_GPIO,
+ .flags = GPIOF_DIR_OUT | GPIOF_INIT_LOW,
+ .label = "usbotg_cs",
+ },
+};
+
/* Camera */
static int visstrim_camera_power(struct device *dev, int on)
{
struct platform_device *pdev;
int dma;
- /* Initialize tvp5150 gpios */
- mxc_gpio_mode(TVP5150_RSTN | GPIO_GPIO | GPIO_OUT);
- mxc_gpio_mode(TVP5150_PWDN | GPIO_GPIO | GPIO_OUT);
- gpio_set_value(TVP5150_RSTN, 1);
- gpio_set_value(TVP5150_PWDN, 0);
- ndelay(1);
-
gpio_set_value(TVP5150_PWDN, 1);
ndelay(1);
gpio_set_value(TVP5150_RSTN, 0);
/* USB OTG */
static int otg_phy_init(struct platform_device *pdev)
{
- gpio_set_value(OTG_PHY_CS_GPIO, 0);
-
- mdelay(10);
-
return mx27_initialize_usb_hw(pdev->id, MXC_EHCI_POWER_PINS_ENABLED);
}
if (ret)
pr_err("Failed to setup pins (%d)\n", ret);
+ ret = gpio_request_array(visstrim_m10_gpios,
+ ARRAY_SIZE(visstrim_m10_gpios));
+ if (ret)
+ pr_err("Failed to request gpios (%d)\n", ret);
+
imx27_add_imx_ssi(0, &visstrim_m10_ssi_pdata);
imx27_add_imx_uart0(&uart_pdata);
* Memory-mapped I/O on MX21ADS base board
*/
#define MX21ADS_MMIO_BASE_ADDR 0xf5000000
-#define MX21ADS_MMIO_SIZE SZ_16M
+#define MX21ADS_MMIO_SIZE 0xc00000
#define MX21ADS_REG_ADDR(offset) (void __force __iomem *) \
(MX21ADS_MMIO_BASE_ADDR + (offset))
void __init imx3_init_l2x0(void)
{
+#ifdef CONFIG_CACHE_L2X0
void __iomem *l2x0_base;
void __iomem *clkctl_base;
}
l2x0_init(l2x0_base, 0x00030024, 0x00000000);
+#endif
}
#ifdef CONFIG_SOC_IMX31
mxc_register_gpio("imx31-gpio", 1, MX31_GPIO2_BASE_ADDR, SZ_16K, MX31_INT_GPIO2, 0);
mxc_register_gpio("imx31-gpio", 2, MX31_GPIO3_BASE_ADDR, SZ_16K, MX31_INT_GPIO3, 0);
+ pinctrl_provide_dummies();
+
if (to_version == 1) {
strncpy(imx31_sdma_pdata.fw_name, "sdma-imx31-to1.bin",
strlen(imx31_sdma_pdata.fw_name));
mxc_register_gpio("imx31-gpio", 2, MX51_GPIO3_BASE_ADDR, SZ_16K, MX51_INT_GPIO3_LOW, MX51_INT_GPIO3_HIGH);
mxc_register_gpio("imx31-gpio", 3, MX51_GPIO4_BASE_ADDR, SZ_16K, MX51_INT_GPIO4_LOW, MX51_INT_GPIO4_HIGH);
+ pinctrl_provide_dummies();
+
/* i.mx51 has the i.mx35 type sdma */
imx_add_imx_sdma("imx35-sdma", MX51_SDMA_BASE_ADDR, MX51_INT_SDMA, &imx51_sdma_pdata);
#include <linux/mv643xx_eth.h>
#include <linux/gpio.h>
#include <linux/leds.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/orion_spi.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
gate_fn->gate.flags = clk_gate_flags;
gate_fn->gate.lock = lock;
gate_fn->gate.hw.init = &init;
+ gate_fn->fn = fn;
/* ops is the gate ops, but with our disable function */
if (clk_gate_fn_ops.disable != clk_gate_fn_disable) {
bit_idx, 0, &gating_lock, fn);
}
+static struct clk *ge0, *ge1;
+
void __init kirkwood_clk_init(void)
{
- struct clk *runit, *ge0, *ge1, *sata0, *sata1, *usb0, *sdio;
+ struct clk *runit, *sata0, *sata1, *usb0, *sdio;
struct clk *crypto, *xor0, *xor1, *pex0, *pex1, *audio;
tclk = clk_register_fixed_rate(NULL, "tclk", NULL,
orion_ge00_init(eth_data,
GE00_PHYS_BASE, IRQ_KIRKWOOD_GE00_SUM,
IRQ_KIRKWOOD_GE00_ERR);
+ /* The interface forgets the MAC address assigned by u-boot if
+ the clock is turned off, so claim the clk now. */
+ clk_prepare_enable(ge0);
}
orion_ge01_init(eth_data,
GE01_PHYS_BASE, IRQ_KIRKWOOD_GE01_SUM,
IRQ_KIRKWOOD_GE01_ERR);
+ clk_prepare_enable(ge1);
}
#define IRQ_MASK_HIGH_OFF 0x0014
#define TIMER_VIRT_BASE (BRIDGE_VIRT_BASE | 0x0300)
+#define TIMER_PHYS_BASE (BRIDGE_PHYS_BASE | 0x0300)
#define L2_CONFIG_REG (BRIDGE_VIRT_BASE | 0x0128)
#define L2_WRITETHROUGH 0x00000010
#define UART1_VIRT_BASE (DEV_BUS_VIRT_BASE | 0x2100)
#define BRIDGE_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x20000)
+#define BRIDGE_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x20000)
#define CRYPTO_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x30000)
icu_data[1].clr_mfp_irq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].clr_mfp_hwirq = IRQ_MMP2_PMIC - IRQ_MMP2_PMIC_BASE;
icu_data[1].nr_irqs = 2;
+ icu_data[1].cascade_irq = 4;
icu_data[1].virq_base = IRQ_MMP2_PMIC_BASE;
icu_data[1].domain = irq_domain_add_legacy(NULL, icu_data[1].nr_irqs,
icu_data[1].virq_base, 0,
icu_data[2].reg_status = mmp_icu_base + 0x154;
icu_data[2].reg_mask = mmp_icu_base + 0x16c;
icu_data[2].nr_irqs = 2;
+ icu_data[2].cascade_irq = 5;
icu_data[2].virq_base = IRQ_MMP2_RTC_BASE;
icu_data[2].domain = irq_domain_add_legacy(NULL, icu_data[2].nr_irqs,
icu_data[2].virq_base, 0,
icu_data[3].reg_status = mmp_icu_base + 0x180;
icu_data[3].reg_mask = mmp_icu_base + 0x17c;
icu_data[3].nr_irqs = 3;
+ icu_data[3].cascade_irq = 9;
icu_data[3].virq_base = IRQ_MMP2_KEYPAD_BASE;
icu_data[3].domain = irq_domain_add_legacy(NULL, icu_data[3].nr_irqs,
icu_data[3].virq_base, 0,
icu_data[4].reg_status = mmp_icu_base + 0x158;
icu_data[4].reg_mask = mmp_icu_base + 0x170;
icu_data[4].nr_irqs = 5;
+ icu_data[4].cascade_irq = 17;
icu_data[4].virq_base = IRQ_MMP2_TWSI_BASE;
icu_data[4].domain = irq_domain_add_legacy(NULL, icu_data[4].nr_irqs,
icu_data[4].virq_base, 0,
icu_data[5].reg_status = mmp_icu_base + 0x15c;
icu_data[5].reg_mask = mmp_icu_base + 0x174;
icu_data[5].nr_irqs = 15;
+ icu_data[5].cascade_irq = 35;
icu_data[5].virq_base = IRQ_MMP2_MISC_BASE;
icu_data[5].domain = irq_domain_add_legacy(NULL, icu_data[5].nr_irqs,
icu_data[5].virq_base, 0,
icu_data[6].reg_status = mmp_icu_base + 0x160;
icu_data[6].reg_mask = mmp_icu_base + 0x178;
icu_data[6].nr_irqs = 2;
+ icu_data[6].cascade_irq = 51;
icu_data[6].virq_base = IRQ_MMP2_MIPI_HSI1_BASE;
icu_data[6].domain = irq_domain_add_legacy(NULL, icu_data[6].nr_irqs,
icu_data[6].virq_base, 0,
icu_data[7].reg_status = mmp_icu_base + 0x188;
icu_data[7].reg_mask = mmp_icu_base + 0x184;
icu_data[7].nr_irqs = 2;
+ icu_data[7].cascade_irq = 55;
icu_data[7].virq_base = IRQ_MMP2_MIPI_HSI0_BASE;
icu_data[7].domain = irq_domain_add_legacy(NULL, icu_data[7].nr_irqs,
icu_data[7].virq_base, 0,
gpmc_onenand_init(&board_onenand_data);
}
-#else
-void
-__init board_onenand_init(struct mtd_partition *nor_parts, u8 nr_parts, u8 cs)
-{
-}
#endif /* CONFIG_MTD_ONENAND_OMAP2 || CONFIG_MTD_ONENAND_OMAP2_MODULE */
#if defined(CONFIG_MTD_NAND_OMAP2) || \
};
static struct musb_hdrc_platform_data tusb_data = {
-#if defined(CONFIG_USB_MUSB_OTG)
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
- .mode = MUSB_PERIPHERAL,
-#else /* defined(CONFIG_USB_MUSB_HOST) */
+#else
.mode = MUSB_HOST,
#endif
.set_power = tusb_set_power,
static struct {
int mmc1_gpio_wp;
int usb_pwr_level;
- int reset_gpio;
+ int dvi_pd_gpio;
int usr_button_gpio;
int mmc_caps;
} beagle_config = {
.mmc1_gpio_wp = -EINVAL,
.usb_pwr_level = GPIOF_OUT_INIT_LOW,
- .reset_gpio = 129,
+ .dvi_pd_gpio = -EINVAL,
.usr_button_gpio = 4,
.mmc_caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
};
printk(KERN_INFO "OMAP3 Beagle Rev: Ax/Bx\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_AXBX;
beagle_config.mmc1_gpio_wp = 29;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 6:
printk(KERN_INFO "OMAP3 Beagle Rev: C1/C2/C3\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C1_3;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 5:
printk(KERN_INFO "OMAP3 Beagle Rev: C4\n");
omap3_beagle_version = OMAP3BEAGLE_BOARD_C4;
beagle_config.mmc1_gpio_wp = 23;
- beagle_config.reset_gpio = 170;
+ beagle_config.dvi_pd_gpio = 170;
beagle_config.usr_button_gpio = 7;
break;
case 0:
if (r)
pr_err("%s: unable to configure nDVI_PWR_EN\n",
__func__);
- r = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH,
- "DVI_LDO_EN");
- if (r)
- pr_err("%s: unable to configure DVI_LDO_EN\n",
- __func__);
+
+ beagle_config.dvi_pd_gpio = gpio + 2;
+
} else {
/*
* REVISIT: need ehci-omap hooks for external VBUS
if (gpio_request_one(gpio + 1, GPIOF_IN, "EHCI_nOC"))
pr_err("%s: unable to configure EHCI_nOC\n", __func__);
}
- dvi_panel.power_down_gpio = beagle_config.reset_gpio;
+ dvi_panel.power_down_gpio = beagle_config.dvi_pd_gpio;
gpio_request_one(gpio + TWL4030_GPIO_MAX, beagle_config.usb_pwr_level,
"nEN_USB_PWR");
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
omap3_beagle_init_rev();
- if (beagle_config.mmc1_gpio_wp != -EINVAL)
+ if (gpio_is_valid(beagle_config.mmc1_gpio_wp))
omap_mux_init_gpio(beagle_config.mmc1_gpio_wp, OMAP_PIN_INPUT);
mmc[0].caps = beagle_config.mmc_caps;
omap_hsmmc_init(mmc);
platform_add_devices(omap3_beagle_devices,
ARRAY_SIZE(omap3_beagle_devices));
+ if (gpio_is_valid(beagle_config.dvi_pd_gpio))
+ omap_mux_init_gpio(beagle_config.dvi_pd_gpio, OMAP_PIN_OUTPUT);
omap_display_init(&beagle_dss_data);
omap_serial_init();
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
- omap_mux_init_gpio(170, OMAP_PIN_INPUT);
- /* REVISIT leave DVI powered down until it's needed ... */
- gpio_request_one(170, GPIOF_OUT_INIT_HIGH, "DVI_nPD");
-
usb_musb_init(NULL);
usbhs_init(&usbhs_bdata);
omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,
.release_resources = lis302_release,
.st_min_limits = {-32, 3, 3},
.st_max_limits = {-3, 32, 32},
- .irq2 = OMAP_GPIO_IRQ(LIS302_IRQ2_GPIO),
};
#endif
{
I2C_BOARD_INFO("lis3lv02d", 0x1d),
.platform_data = &rx51_lis3lv02d_data,
- .irq = OMAP_GPIO_IRQ(LIS302_IRQ1_GPIO),
},
#endif
};
omap_pmic_init(1, 2200, "twl5030", INT_34XX_SYS_NIRQ, &rx51_twldata);
omap_register_i2c_bus(2, 100, rx51_peripherals_i2c_board_info_2,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_2));
+#if defined(CONFIG_SENSORS_LIS3_I2C) || defined(CONFIG_SENSORS_LIS3_I2C_MODULE)
+ rx51_lis3lv02d_data.irq2 = gpio_to_irq(LIS302_IRQ2_GPIO);
+ rx51_peripherals_i2c_board_info_3[0].irq = gpio_to_irq(LIS302_IRQ1_GPIO);
+#endif
omap_register_i2c_bus(3, 400, rx51_peripherals_i2c_board_info_3,
ARRAY_SIZE(rx51_peripherals_i2c_board_info_3));
return 0;
struct omap_clk *c;
u32 cpu_clkflg = 0;
- if (cpu_is_omap3517()) {
+ if (soc_is_am35xx()) {
cpu_mask = RATE_IN_34XX;
cpu_clkflg = CK_AM35XX;
} else if (cpu_is_omap3630()) {
static struct clk sys_32k_ck = {
.name = "sys_32k_ck",
+ .clkdm_name = "prm_clkdm",
.rate = 32768,
.ops = &clkops_null,
};
.name = "ddrphy_ck",
.parent = &dpll_core_m2_ck,
.ops = &clkops_null,
+ .clkdm_name = "l3_emif_clkdm",
.fixed_div = 2,
.recalc = &omap_fixed_divisor_recalc,
};
static struct clk dpll_mpu_m2_ck = {
.name = "dpll_mpu_m2_ck",
.parent = &dpll_mpu_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = dpll_mpu_m2_div,
.clksel_reg = OMAP4430_CM_DIV_M2_DPLL_MPU,
.clksel_mask = OMAP4430_DPLL_CLKOUT_DIV_MASK,
static struct clk l3_div_ck = {
.name = "l3_div_ck",
.parent = &div_core_ck,
+ .clkdm_name = "cm_clkdm",
.clksel = l3_div_div,
.clksel_reg = OMAP4430_CM_CLKSEL_CORE,
.clksel_mask = OMAP4430_CLKSEL_L3_MASK,
static struct clk trace_clk_div_ck = {
.name = "trace_clk_div_ck",
.parent = &pmd_trace_clk_mux_ck,
+ .clkdm_name = "emu_sys_clkdm",
.clksel = trace_clk_div_div,
.clksel_reg = OMAP4430_CM_EMU_DEBUGSS_CLKCTRL,
.clksel_mask = OMAP4430_CLKSEL_PMD_TRACE_CLK_MASK,
if (cpu_is_omap443x()) {
cpu_mask = RATE_IN_4430;
cpu_clkflg = CK_443X;
- } else if (cpu_is_omap446x()) {
+ } else if (cpu_is_omap446x() || cpu_is_omap447x()) {
cpu_mask = RATE_IN_4460 | RATE_IN_4430;
cpu_clkflg = CK_446X | CK_443X;
+
+ if (cpu_is_omap447x())
+ pr_warn("WARNING: OMAP4470 clock data incomplete!\n");
} else {
return 0;
}
*/
#define MAX_MODULE_READY_TIME 2000
+/*
+ * MAX_MODULE_DISABLE_TIME: max duration in microseconds to wait for
+ * the PRCM to request that a module enter the inactive state in the
+ * case of OMAP2 & 3. In the case of OMAP4 this is the max duration
+ * in microseconds for the module to reach the inactive state from
+ * a functional state.
+ * XXX FSUSB on OMAP4430 takes ~4ms to idle after reset during
+ * kernel init.
+ */
+#define MAX_MODULE_DISABLE_TIME 5000
+
#endif
omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
- MAX_MODULE_READY_TIME, i);
+ MAX_MODULE_DISABLE_TIME, i);
- return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
+ return (i < MAX_MODULE_DISABLE_TIME) ? 0 : -EBUSY;
}
/**
#include <linux/module.h>
#include <linux/platform_device.h>
+
+#include <asm/memblock.h>
+
#include "cm2xxx_3xxx.h"
#include "prm2xxx_3xxx.h"
#ifdef CONFIG_BRIDGE_DVFS
omap_features |= OMAP3_HAS_SDRC;
+ /*
+ * am35x fixups:
+ * - The am35x Chip ID register has bits 12, 7:5, and 3:2 marked as
+ * reserved and therefore return 0 when read. Unfortunately,
+ * OMAP3_CHECK_FEATURE() will interpret some of those zeroes to
+ * mean that a feature is present even though it isn't so clear
+ * the incorrectly set feature bits.
+ */
+ if (soc_is_am35xx())
+ omap_features &= ~(OMAP3_HAS_IVA | OMAP3_HAS_ISP);
+
/*
* TODO: Get additional info (where applicable)
* e.g. Size of L2 cache.
ct->chip.irq_ack = omap_mask_ack_irq;
ct->chip.irq_mask = irq_gc_mask_disable_reg;
ct->chip.irq_unmask = irq_gc_unmask_enable_reg;
+ ct->chip.flags |= IRQCHIP_SKIP_SET_WAKE;
ct->regs.enable = INTC_MIR_CLEAR0;
ct->regs.disable = INTC_MIR_SET0;
#include "control.h"
#include "mux.h"
#include "prm.h"
+#include "common.h"
#define OMAP_MUX_BASE_OFFSET 0x30 /* Offset from CTRL_BASE */
#define OMAP_MUX_BASE_SZ 0x5ca
return -ENODEV;
}
-static int __init
-omap_mux_get_by_name(const char *muxname,
+int __init omap_mux_get_by_name(const char *muxname,
struct omap_mux_partition **found_partition,
struct omap_mux **found_mux)
{
#define OMAP_PIN_OFF_WAKEUPENABLE OMAP_WAKEUP_EN
#define OMAP_MODE_GPIO(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE4)
+#define OMAP_MODE_UART(x) (((x) & OMAP_MUX_MODE7) == OMAP_MUX_MODE0)
/* Flags for omapX_mux_init */
#define OMAP_PACKAGE_MASK 0xffff
*/
void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state);
+int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux);
#else
+static inline int omap_mux_get_by_name(const char *muxname,
+ struct omap_mux_partition **found_partition,
+ struct omap_mux **found_mux)
+{
+ return 0;
+}
+
static inline int omap_mux_init_gpio(int gpio, int val)
{
return 0;
if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
_set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART, v);
if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
- _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
+ _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART, v);
/* XXX test pwrdm_get_wken for this hwmod's subsystem */
.rev_offs = 0x0000,
.sysc_offs = 0x0004,
.sysc_flags = SYSC_HAS_SIDLEMODE,
- .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
- SIDLE_SMART_WKUP),
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO),
.sysc_fields = &omap_hwmod_sysc_type1,
};
.name = "dss_hdmi",
.class = &omap44xx_hdmi_hwmod_class,
.clkdm_name = "l3_dss_clkdm",
+ /*
+ * HDMI audio requires to use no-idle mode. Hence,
+ * set idle mode by software.
+ */
+ .flags = HWMOD_SWSUP_SIDLE,
.mpu_irqs = omap44xx_dss_hdmi_irqs,
.sdma_reqs = omap44xx_dss_hdmi_sdma_reqs,
.main_clk = "dss_48mhz_clk",
u8 multi = error & L3_ERROR_LOG_MULTI;
u32 address = omap3_l3_decode_addr(error_addr);
- WARN(true, "%s seen by %s %s at address %x\n",
+ pr_err("%s seen by %s %s at address %x\n",
omap3_l3_code_string(code),
omap3_l3_initiator_string(initid),
multi ? "Multiple Errors" : "", address);
+ WARN_ON(1);
return IRQ_HANDLED;
}
devconf2 &= ~CONF2_OTGMODE;
switch (musb_mode) {
-#ifdef CONFIG_USB_MUSB_HDRC_HCD
case MUSB_HOST: /* Force VBUS valid, ID = 0 */
devconf2 |= CONF2_FORCE_HOST;
break;
-#endif
-#ifdef CONFIG_USB_GADGET_MUSB_HDRC
case MUSB_PERIPHERAL: /* Force VBUS valid, ID = 1 */
devconf2 |= CONF2_FORCE_DEVICE;
break;
-#endif
-#ifdef CONFIG_USB_MUSB_OTG
case MUSB_OTG: /* Don't override the VBUS/ID comparators */
devconf2 |= CONF2_NO_OVERRIDE;
break;
-#endif
default:
pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
}
ret = request_irq(omap_prcm_event_to_irq("io"),
_prcm_int_handle_io, IRQF_SHARED | IRQF_NO_SUSPEND, "pm_io",
omap3_pm_init);
+ enable_irq(omap_prcm_event_to_irq("io"));
if (ret) {
pr_err("pm: Failed to request pm_io irq\n");
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/io.h>
+#include <linux/irq.h>
#include "common.h"
#include <plat/cpu.h>
static int __init omap3xxx_prcm_init(void)
{
- if (cpu_is_omap34xx())
- return omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
- return 0;
+ int ret = 0;
+
+ if (cpu_is_omap34xx()) {
+ ret = omap_prcm_register_chain_handler(&omap3_prcm_irq_setup);
+ if (!ret)
+ irq_set_status_flags(omap_prcm_event_to_irq("io"),
+ IRQ_NOAUTOEN);
+ }
+
+ return ret;
}
subsys_initcall(omap3xxx_prcm_init);
struct list_head node;
struct omap_hwmod *oh;
+ struct omap_device_pad default_omap_uart_pads[2];
};
static LIST_HEAD(uart_list);
#endif /* CONFIG_PM */
#ifdef CONFIG_OMAP_MUX
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata)
+
+#define OMAP_UART_DEFAULT_PAD_NAME_LEN 28
+static char rx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN],
+ tx_pad_name[OMAP_UART_DEFAULT_PAD_NAME_LEN] __initdata;
+
+static void __init
+omap_serial_fill_uart_tx_rx_pads(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+ uart->default_omap_uart_pads[0].name = rx_pad_name;
+ uart->default_omap_uart_pads[0].flags = OMAP_DEVICE_PAD_REMUX |
+ OMAP_DEVICE_PAD_WAKEUP;
+ uart->default_omap_uart_pads[0].enable = OMAP_PIN_INPUT |
+ OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[0].idle = OMAP_PIN_INPUT | OMAP_MUX_MODE0;
+ uart->default_omap_uart_pads[1].name = tx_pad_name;
+ uart->default_omap_uart_pads[1].enable = OMAP_PIN_OUTPUT |
+ OMAP_MUX_MODE0;
+ bdata->pads = uart->default_omap_uart_pads;
+ bdata->pads_cnt = ARRAY_SIZE(uart->default_omap_uart_pads);
+}
+
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
{
+ struct omap_mux_partition *tx_partition = NULL, *rx_partition = NULL;
+ struct omap_mux *rx_mux = NULL, *tx_mux = NULL;
+ char *rx_fmt, *tx_fmt;
+ int uart_nr = bdata->id + 1;
+
+ if (bdata->id != 2) {
+ rx_fmt = "uart%d_rx.uart%d_rx";
+ tx_fmt = "uart%d_tx.uart%d_tx";
+ } else {
+ rx_fmt = "uart%d_rx_irrx.uart%d_rx_irrx";
+ tx_fmt = "uart%d_tx_irtx.uart%d_tx_irtx";
+ }
+
+ snprintf(rx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, rx_fmt,
+ uart_nr, uart_nr);
+ snprintf(tx_pad_name, OMAP_UART_DEFAULT_PAD_NAME_LEN, tx_fmt,
+ uart_nr, uart_nr);
+
+ if (omap_mux_get_by_name(rx_pad_name, &rx_partition, &rx_mux) >= 0 &&
+ omap_mux_get_by_name
+ (tx_pad_name, &tx_partition, &tx_mux) >= 0) {
+ u16 tx_mode, rx_mode;
+
+ tx_mode = omap_mux_read(tx_partition, tx_mux->reg_offset);
+ rx_mode = omap_mux_read(rx_partition, rx_mux->reg_offset);
+
+ /*
+ * Check if uart is used in default tx/rx mode i.e. in mux mode0
+ * if yes then configure rx pin for wake up capability
+ */
+ if (OMAP_MODE_UART(rx_mode) && OMAP_MODE_UART(tx_mode))
+ omap_serial_fill_uart_tx_rx_pads(bdata, uart);
+ }
}
#else
-static void omap_serial_fill_default_pads(struct omap_board_data *bdata) {}
+static void __init omap_serial_check_wakeup(struct omap_board_data *bdata,
+ struct omap_uart_state *uart)
+{
+}
#endif
static char *cmdline_find_option(char *str)
bdata.pads = NULL;
bdata.pads_cnt = 0;
- if (cpu_is_omap44xx() || cpu_is_omap34xx())
- omap_serial_fill_default_pads(&bdata);
+ omap_serial_check_wakeup(&bdata, uart);
if (!info)
omap_serial_init_port(&bdata, NULL);
};
static struct musb_hdrc_platform_data musb_plat = {
-#ifdef CONFIG_USB_MUSB_OTG
+#ifdef CONFIG_USB_GADGET_MUSB_HDRC
.mode = MUSB_OTG,
-#elif defined(CONFIG_USB_MUSB_HDRC_HCD)
+#else
.mode = MUSB_HOST,
-#elif defined(CONFIG_USB_GADGET_MUSB_HDRC)
- .mode = MUSB_PERIPHERAL,
#endif
/* .clock is set dynamically */
.config = &musb_config,
printk(error, 3, status);
return status;
}
- tusb_resources[2].start = irq + IH_GPIO_BASE;
+ tusb_resources[2].start = gpio_to_irq(irq);
/* set up memory timings ... can speed them up later */
if (!ps_refclk) {
#define MAIN_IRQ_MASK (ORION5X_BRIDGE_VIRT_BASE | 0x204)
#define TIMER_VIRT_BASE (ORION5X_BRIDGE_VIRT_BASE | 0x300)
-
+#define TIMER_PHYS_BASE (ORION5X_BRIDGE_PHYS_BASE | 0x300)
#endif
--- /dev/null
+/*
+ * arch/arm/mach-orion5x/include/mach/io.h
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <mach/orion5x.h>
+#include <asm/sizes.h>
+
+#define IO_SPACE_LIMIT SZ_2M
+static inline void __iomem *__io(unsigned long addr)
+{
+ return (void __iomem *)(addr + ORION5X_PCIE_IO_VIRT_BASE);
+}
+
+#define __io(a) __io(a)
+#endif
#define UART1_VIRT_BASE (ORION5X_DEV_BUS_VIRT_BASE | 0x2100)
#define ORION5X_BRIDGE_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x20000)
+#define ORION5X_BRIDGE_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x20000)
#define ORION5X_PCI_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x30000)
.init_irq = r8a7740_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = eva_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = eva_boards_compat_dt,
MACHINE_END
.init_irq = emev2_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm9d_add_standard_devices,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9d_boards_compat_dt,
MACHINE_END
.init_irq = sh73a0_init_irq,
.handle_irq = gic_handle_irq,
.init_machine = kzm_init,
+ .init_late = shmobile_init_late,
.timer = &shmobile_timer,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
gpio_request(GPIO_FN_SDHID0_1, NULL);
gpio_request(GPIO_FN_SDHID0_0, NULL);
+ /* SDHI0 PORT172 card-detect IRQ26 */
+ gpio_request(GPIO_FN_IRQ26_172, NULL);
+
#if !defined(CONFIG_MMC_SH_MMCIF) && !defined(CONFIG_MMC_SH_MMCIF_MODULE)
/* enable SDHI1 */
gpio_request(GPIO_FN_SDHICMD1, NULL);
enum { MSTP001,
MSTP129, MSTP128, MSTP127, MSTP126, MSTP125, MSTP118, MSTP116, MSTP100,
- MSTP219,
+ MSTP219, MSTP218,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
- MSTP331, MSTP329, MSTP325, MSTP323, MSTP318,
+ MSTP331, MSTP329, MSTP325, MSTP323,
MSTP314, MSTP313, MSTP312, MSTP311,
MSTP303, MSTP302, MSTP301, MSTP300,
MSTP411, MSTP410, MSTP403,
[MSTP116] = MSTP(&div4_clks[DIV4_HP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP100] = MSTP(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP219] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 19, 0), /* SCIFA7 */
+ [MSTP218] = MSTP(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* SY-DMAC */
[MSTP207] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 7, 0), /* SCIFA5 */
[MSTP206] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 6, 0), /* SCIFB */
[MSTP204] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR2, 4, 0), /* SCIFA0 */
[MSTP329] = MSTP(&r_clk, SMSTPCR3, 29, 0), /* CMT10 */
[MSTP325] = MSTP(&div6_clks[DIV6_SUB], SMSTPCR3, 25, 0), /* IrDA */
[MSTP323] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 23, 0), /* IIC1 */
- [MSTP318] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 18, 0), /* SY-DMAC */
[MSTP314] = MSTP(&div6_clks[DIV6_SDHI0], SMSTPCR3, 14, 0), /* SDHI0 */
[MSTP313] = MSTP(&div6_clks[DIV6_SDHI1], SMSTPCR3, 13, 0), /* SDHI1 */
[MSTP312] = MSTP(&div4_clks[DIV4_HP], SMSTPCR3, 12, 0), /* MMCIF0 */
CLKDEV_DEV_ID("i2c-sh_mobile.0", &mstp_clks[MSTP116]), /* I2C0 */
CLKDEV_DEV_ID("sh_mobile_lcdc_fb.0", &mstp_clks[MSTP100]), /* LCDC0 */
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP219]), /* SCIFA7 */
+ CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]), /* SY-DMAC */
CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP207]), /* SCIFA5 */
CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP206]), /* SCIFB */
CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
CLKDEV_DEV_ID("sh_cmt.10", &mstp_clks[MSTP329]), /* CMT10 */
CLKDEV_DEV_ID("sh_irda.0", &mstp_clks[MSTP325]), /* IrDA */
CLKDEV_DEV_ID("i2c-sh_mobile.1", &mstp_clks[MSTP323]), /* I2C1 */
- CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP318]), /* SY-DMAC */
CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */
CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */
CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */
#define INT2SMSKCR3 0xfe7822ac
#define INT2SMSKCR4 0xfe7822b0
+#define INT2NTSR0 0xfe700060
+#define INT2NTSR1 0xfe700064
+
static int r8a7779_set_wake(struct irq_data *data, unsigned int on)
{
return 0; /* always allow wakeup */
gic_init(0, 29, gic_dist_base, gic_cpu_base);
gic_arch_extn.irq_set_wake = r8a7779_set_wake;
+ /* route all interrupts to ARM */
+ __raw_writel(0xffffffff, INT2NTSR0);
+ __raw_writel(0x3fffffff, INT2NTSR1);
+
/* unmask all known interrupts in INTCS2 */
__raw_writel(0xfffffff0, INT2SMSKCR0);
__raw_writel(0xfff7ffff, INT2SMSKCR1);
#define is_sh73a0() (machine_is_ag5evm() || machine_is_kota2() || \
of_machine_is_compatible("renesas,sh73a0"))
#define is_r8a7779() machine_is_marzen()
+
+#ifdef CONFIG_ARCH_EMEV2
#define is_emev2() of_machine_is_compatible("renesas,emev2")
+#else
+#define is_emev2() (0)
+#endif
static unsigned int __init shmobile_smp_get_core_count(void)
{
},
};
-#define SH7372_CHCLR 0x220
+#define SH7372_CHCLR (0x220 - 0x20)
static const struct sh_dmae_channel sh7372_dmae_channels[] = {
{
* Debugging macro include header spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMA information for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx machine family generic header file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for spear13xx machine family
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* spear13xx Machine family specific definition
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr13XX machines common source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Debugging macro include header spear3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family generic header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar<viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* IRQ helper macros for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr3xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx Machine family specific definition
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machine family specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr300 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr310 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr320 machine source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3XX machines common source file
*
* Copyright (C) 2009-2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* GPIO macros for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Miscellaneous registers definitions for SPEAr6xx machine family
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
static bool is_enabled;
-static void tegra_cpu_reset_handler_enable(void)
+static void __init tegra_cpu_reset_handler_enable(void)
{
void __iomem *iram_base = IO_ADDRESS(TEGRA_IRAM_RESET_BASE);
void __iomem *evp_cpu_reset =
udelay(1);
}
-/* This needs to be referenced by callbacks */
-struct pinctrl *u0_p;
-struct pinctrl_state *u0_def;
-struct pinctrl_state *u0_sleep;
-
-static void ux500_uart0_init(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_def))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_def);
- if (ret)
- pr_err("could not set UART0 defstate\n");
-}
-
-static void ux500_uart0_exit(void)
-{
- int ret;
-
- if (IS_ERR(u0_p) || IS_ERR(u0_sleep))
- return;
-
- ret = pinctrl_select_state(u0_p, u0_sleep);
- if (ret)
- pr_err("could not set UART0 idlestate\n");
-}
-
static struct amba_pl011_data uart0_plat = {
#ifdef CONFIG_STE_DMA40
.dma_filter = stedma40_filter,
.dma_rx_param = &uart0_dma_cfg_rx,
.dma_tx_param = &uart0_dma_cfg_tx,
#endif
- .init = ux500_uart0_init,
- .exit = ux500_uart0_exit,
.reset = ux500_uart0_reset,
};
static void __init mop500_uart_init(struct device *parent)
{
- struct amba_device *uart0_device;
-
- uart0_device = db8500_add_uart0(parent, &uart0_plat);
- if (uart0_device) {
- u0_p = pinctrl_get(&uart0_device->dev);
- if (IS_ERR(u0_p))
- dev_err(&uart0_device->dev,
- "could not get UART0 pinctrl\n");
- else {
- u0_def = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_DEFAULT);
- if (IS_ERR(u0_def)) {
- dev_err(&uart0_device->dev,
- "could not get UART0 defstate\n");
- }
- u0_sleep = pinctrl_lookup_state(u0_p,
- PINCTRL_STATE_SLEEP);
- if (IS_ERR(u0_sleep))
- dev_err(&uart0_device->dev,
- "could not get UART0 idlestate\n");
- }
- }
+ db8500_add_uart0(parent, &uart0_plat);
db8500_add_uart1(parent, &uart1_plat);
db8500_add_uart2(parent, &uart2_plat);
}
.pfn = __phys_to_pfn(VERSATILE_PCI_CFG_BASE),
.length = VERSATILE_PCI_CFG_BASE_SIZE,
.type = MT_DEVICE
- },
-#if 0
- {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE0,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
- .length = SZ_16M,
- .type = MT_DEVICE
}, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE1,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE1),
- .length = SZ_16M,
- .type = MT_DEVICE
- }, {
- .virtual = VERSATILE_PCI_VIRT_MEM_BASE2,
- .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE2),
- .length = SZ_16M,
+ .virtual = (unsigned long)VERSATILE_PCI_VIRT_MEM_BASE0,
+ .pfn = __phys_to_pfn(VERSATILE_PCI_MEM_BASE0),
+ .length = IO_SPACE_LIMIT,
.type = MT_DEVICE
},
#endif
-#endif
};
void __init versatile_map_io(void)
*/
#define VERSATILE_PCI_VIRT_BASE (void __iomem *)0xe8000000ul
#define VERSATILE_PCI_CFG_VIRT_BASE (void __iomem *)0xe9000000ul
+#define VERSATILE_PCI_VIRT_MEM_BASE0 (void __iomem *)PCIO_BASE
-/* macro to get at IO space when running virtually */
+/* macro to get at MMIO space when running virtually */
#define IO_ADDRESS(x) (((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
#define __io_address(n) ((void __iomem __force *)IO_ADDRESS(n))
--- /dev/null
+/*
+ * arch/arm/mach-versatile/include/mach/io.h
+ *
+ * Copyright (C) 2003 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+#ifndef __ASM_ARM_ARCH_IO_H
+#define __ASM_ARM_ARCH_IO_H
+
+#define PCIO_BASE 0xeb000000ul
+
+#define __io(a) ((a) + PCIO_BASE)
+
+#endif
.write = versatile_write_config,
};
+static struct resource io_port = {
+ .name = "PCI",
+ .start = 0,
+ .end = IO_SPACE_LIMIT,
+ .flags = IORESOURCE_IO,
+};
+
static struct resource io_mem = {
.name = "PCI I/O space",
.start = VERSATILE_PCI_MEM_BASE0,
.end = VERSATILE_PCI_MEM_BASE0+VERSATILE_PCI_MEM_BASE0_SIZE-1,
- .flags = IORESOURCE_IO,
+ .flags = IORESOURCE_MEM,
};
static struct resource non_mem = {
"memory region (%d)\n", ret);
goto out;
}
+ ret = request_resource(&ioport_resource, &io_port);
+ if (ret) {
+ printk(KERN_ERR "PCI: unable to allocate I/O "
+ "port region (%d)\n", ret);
+ goto out;
+ }
ret = request_resource(&iomem_resource, &non_mem);
if (ret) {
printk(KERN_ERR "PCI: unable to allocate non-prefetchable "
* the mem resource for this bus
* the prefetch mem resource for this bus
*/
- pci_add_resource_offset(&sys->resources, &io_mem, sys->io_offset);
+ pci_add_resource_offset(&sys->resources, &io_port, sys->io_offset);
pci_add_resource_offset(&sys->resources, &non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pre_mem, sys->mem_offset);
if (nr == 0) {
sys->mem_offset = 0;
+ sys->io_offset = 0;
ret = pci_versatile_setup_resources(sys);
if (ret < 0) {
printk("pci_versatile_setup: resources... oops?\n");
update_on_xread(ctx);
emit(ARM_MOV_R(r_A, r_X), ctx);
break;
+ case BPF_S_ANC_ALU_XOR_X:
+ /* A ^= X */
+ update_on_xread(ctx);
+ emit(ARM_EOR_R(r_A, r_A, r_X), ctx);
+ break;
case BPF_S_ANC_PROTOCOL:
/* A = ntohs(skb->protocol) */
ctx->seen |= SEEN_SKB;
#define ARM_INST_CMP_R 0x01500000
#define ARM_INST_CMP_I 0x03500000
+#define ARM_INST_EOR_R 0x00200000
+
#define ARM_INST_LDRB_I 0x05d00000
#define ARM_INST_LDRB_R 0x07d00000
#define ARM_INST_LDRH_I 0x01d000b0
#define ARM_CMP_R(rn, rm) _AL3_R(ARM_INST_CMP, 0, rn, rm)
#define ARM_CMP_I(rn, imm) _AL3_I(ARM_INST_CMP, 0, rn, imm)
+#define ARM_EOR_R(rd, rn, rm) _AL3_R(ARM_INST_EOR, rd, rn, rm)
+
#define ARM_LDR_I(rt, rn, off) (ARM_INST_LDR_I | (rt) << 12 | (rn) << 16 \
| (off))
#define ARM_LDRB_I(rt, rn, off) (ARM_INST_LDRB_I | (rt) << 12 | (rn) << 16 \
#include <linux/irq.h>
#include <linux/clockchips.h>
#include <linux/clk.h>
+#include <linux/err.h>
#include <mach/hardware.h>
#include <asm/mach/time.h>
return 0;
}
-void __init epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init epit_timer_init(void __iomem *base, int irq)
{
+ struct clk *timer_clk;
+
+ timer_clk = clk_get_sys("imx-epit.0", NULL);
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX epit: unable to get clk\n");
+ return;
+ }
+
clk_prepare_enable(timer_clk);
timer_base = base;
extern void imx51_soc_init(void);
extern void imx53_soc_init(void);
extern void imx51_init_late(void);
-extern void epit_timer_init(struct clk *timer_clk, void __iomem *base, int irq);
-extern void mxc_timer_init(struct clk *timer_clk, void __iomem *, int);
+extern void epit_timer_init(void __iomem *base, int irq);
+extern void mxc_timer_init(void __iomem *, int);
extern int mx1_clocks_init(unsigned long fref);
extern int mx21_clocks_init(unsigned long lref, unsigned long fref);
extern int mx25_clocks_init(void);
/* MX31, MX35, MX25, MX5 */
#define V2_TCTL_WAITEN (1 << 3) /* Wait enable mode */
#define V2_TCTL_CLK_IPG (1 << 6)
+#define V2_TCTL_CLK_PER (2 << 6)
#define V2_TCTL_FRR (1 << 9)
#define V2_IR 0x0c
#define V2_TSTAT 0x08
return 0;
}
-void __init mxc_timer_init(struct clk *timer_clk, void __iomem *base, int irq)
+void __init mxc_timer_init(void __iomem *base, int irq)
{
uint32_t tctl_val;
+ struct clk *timer_clk;
struct clk *timer_ipg_clk;
- if (!timer_clk) {
- timer_clk = clk_get_sys("imx-gpt.0", "per");
- if (IS_ERR(timer_clk)) {
- pr_err("i.MX timer: unable to get clk\n");
- return;
- }
-
- timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
- if (!IS_ERR(timer_ipg_clk))
- clk_prepare_enable(timer_ipg_clk);
+ timer_clk = clk_get_sys("imx-gpt.0", "per");
+ if (IS_ERR(timer_clk)) {
+ pr_err("i.MX timer: unable to get clk\n");
+ return;
}
+ timer_ipg_clk = clk_get_sys("imx-gpt.0", "ipg");
+ if (!IS_ERR(timer_ipg_clk))
+ clk_prepare_enable(timer_ipg_clk);
+
clk_prepare_enable(timer_clk);
timer_base = base;
__raw_writel(0, timer_base + MXC_TPRER); /* see datasheet note */
if (timer_is_v2())
- tctl_val = V2_TCTL_CLK_IPG | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
+ tctl_val = V2_TCTL_CLK_PER | V2_TCTL_FRR | V2_TCTL_WAITEN | MXC_TCTL_TEN;
else
tctl_val = MX1_2_TCTL_FRR | MX1_2_TCTL_CLK_PCLK1 | MXC_TCTL_TEN;
struct clk *c;
struct clk *pa;
+ mutex_lock(&clocks_mutex);
seq_printf(s, "%-30s %-30s %-10s %s\n",
"clock-name", "parent-name", "rate", "use-count");
seq_printf(s, "%-30s %-30s %-10lu %d\n",
c->name, pa ? pa->name : "none", c->rate, c->usecount);
}
+ mutex_unlock(&clocks_mutex);
return 0;
}
* cpu_is_omap2423(): True for OMAP2423
* cpu_is_omap2430(): True for OMAP2430
* cpu_is_omap3430(): True for OMAP3430
- * cpu_is_omap3505(): True for OMAP3505
- * cpu_is_omap3517(): True for OMAP3517
*/
#define GET_OMAP_TYPE ((omap_rev() >> 16) & 0xffff)
IS_OMAP_TYPE(2423, 0x2423)
IS_OMAP_TYPE(2430, 0x2430)
IS_OMAP_TYPE(3430, 0x3430)
-IS_OMAP_TYPE(3505, 0x3517)
-IS_OMAP_TYPE(3517, 0x3517)
#define cpu_is_omap310() 0
#define cpu_is_omap730() 0
#define cpu_is_omap2422() 0
#define cpu_is_omap2423() 0
#define cpu_is_omap2430() 0
-#define cpu_is_omap3503() 0
-#define cpu_is_omap3515() 0
-#define cpu_is_omap3525() 0
-#define cpu_is_omap3530() 0
-#define cpu_is_omap3505() 0
-#define cpu_is_omap3517() 0
#define cpu_is_omap3430() 0
#define cpu_is_omap3630() 0
#if defined(CONFIG_ARCH_OMAP3)
# undef cpu_is_omap3430
-# undef cpu_is_omap3503
-# undef cpu_is_omap3515
-# undef cpu_is_omap3525
-# undef cpu_is_omap3530
-# undef cpu_is_omap3505
-# undef cpu_is_omap3517
# undef cpu_is_ti81xx
# undef cpu_is_ti816x
# undef cpu_is_ti814x
# undef cpu_is_am33xx
# undef cpu_is_am335x
# define cpu_is_omap3430() is_omap3430()
-# define cpu_is_omap3503() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (!omap3_has_sgx()))
-# define cpu_is_omap3515() (cpu_is_omap3430() && \
- (!omap3_has_iva()) && \
- (omap3_has_sgx()))
-# define cpu_is_omap3525() (cpu_is_omap3430() && \
- (!omap3_has_sgx()) && \
- (omap3_has_iva()))
-# define cpu_is_omap3530() (cpu_is_omap3430())
-# define cpu_is_omap3517() is_omap3517()
-# define cpu_is_omap3505() (cpu_is_omap3517() && \
- !omap3_has_sgx())
# undef cpu_is_omap3630
# define cpu_is_omap3630() is_omap363x()
# define cpu_is_ti81xx() is_ti81xx()
#define OMAP3630_REV_ES1_1 (OMAP363X_CLASS | (0x1 << 8))
#define OMAP3630_REV_ES1_2 (OMAP363X_CLASS | (0x2 << 8))
-#define OMAP3517_CLASS 0x35170034
-#define OMAP3517_REV_ES1_0 OMAP3517_CLASS
-#define OMAP3517_REV_ES1_1 (OMAP3517_CLASS | (0x1 << 8))
-
#define TI816X_CLASS 0x81600034
#define TI8168_REV_ES1_0 TI816X_CLASS
#define TI8168_REV_ES1_1 (TI816X_CLASS | (0x1 << 8))
extern void omap_mmc_notify_cover_event(struct device *dev, int slot,
int is_closed);
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
- defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
+#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
void omap1_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers);
void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
{
}
-
#endif
extern int omap_msdi_reset(struct omap_hwmod *oh);
* Watchdog
****************************************************************************/
static struct resource orion_wdt_resource =
- DEFINE_RES_MEM(TIMER_VIRT_BASE, 0x28);
+ DEFINE_RES_MEM(TIMER_PHYS_BASE, 0x28);
static struct platform_device orion_wdt_device = {
.name = "orion_wdt",
{ "pxa25x-nssp", PXA25x_NSSP },
{ "pxa27x-ssp", PXA27x_SSP },
{ "pxa168-ssp", PXA168_SSP },
+ { "pxa910-ssp", PXA910_SSP },
{ },
};
* Debugging macro include header for spear platform
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer header file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific timex definitions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Serial port stubs for kernel decompress status messages
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* DMAC pl080 definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform specific restart functions
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr platform shared irq layer source file
*
* Copyright (C) 2009 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#if defined(__H8300H__)
#define CPU "H8/300H"
char __initdata command_line[COMMAND_LINE_SIZE];
-extern int _stext, _etext, _sdata, _edata, _sbss, _ebss, _end;
extern int _ramstart, _ramend;
extern char _target_name[];
extern void h8300_gpio_init(void);
memory_end = CONFIG_BLKDEV_RESERVE_ADDRESS;
#endif
- init_mm.start_code = (unsigned long) &_stext;
- init_mm.end_code = (unsigned long) &_etext;
- init_mm.end_data = (unsigned long) &_edata;
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
init_mm.brk = (unsigned long) 0;
#if (defined(CONFIG_H8300H_SIM) || defined(CONFIG_H8S_SIM)) && defined(CONFIG_GDB_MAGICPRINT)
printk(KERN_INFO "H8/300 series support by Yoshinori Sato <ysato@users.sourceforge.jp>\n");
#ifdef DEBUG
- printk(KERN_DEBUG "KERNEL -> TEXT=0x%06x-0x%06x DATA=0x%06x-0x%06x "
- "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext,
- (int) &_sdata, (int) &_edata,
- (int) &_sbss, (int) &_ebss);
- printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x "
- "STACK=0x%06x-0x%06x\n",
- (int) &_ebss, (int) memory_start,
- (int) memory_start, (int) memory_end,
- (int) memory_end, (int) &_ramend);
+ printk(KERN_DEBUG "KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p "
+ "BSS=0x%p-0x%p\n", _stext, _etext, _sdata, _edata, __bss_start,
+ __bss_stop);
+ printk(KERN_DEBUG "KERNEL -> ROMFS=0x%p-0x%06lx MEM=0x%06lx-0x%06lx "
+ "STACK=0x%06lx-0x%p\n", __bss_stop, memory_start, memory_start,
+ memory_end, memory_end, &_ramend);
#endif
#ifdef CONFIG_DEFAULT_CMDLINE
#include <asm/segment.h>
#include <asm/page.h>
#include <asm/pgtable.h>
+#include <asm/sections.h>
#undef DEBUG
int codek = 0, datak = 0, initk = 0;
/* DAVIDM look at setup memory map generically with reserved area */
unsigned long tmp;
- extern char _etext, _stext, _sdata, _ebss, __init_begin, __init_end;
extern unsigned long _ramend, _ramstart;
unsigned long len = &_ramend - &_ramstart;
unsigned long start_mem = memory_start; /* DAVIDM - these must start at end of kernel */
/* this will put all memory onto the freelists */
totalram_pages = free_all_bootmem();
- codek = (&_etext - &_stext) >> 10;
- datak = (&_ebss - &_sdata) >> 10;
- initk = (&__init_begin - &__init_end) >> 10;
+ codek = (_etext - _stext) >> 10;
+ datak = (__bss_stop - _sdata) >> 10;
+ initk = (__init_begin - __init_end) >> 10;
tmp = nr_free_pages() << PAGE_SHIFT;
printk(KERN_INFO "Memory available: %luk/%luk RAM, %luk/%luk ROM (%dk kernel code, %dk data)\n",
{
#ifdef CONFIG_RAMKERNEL
unsigned long addr;
- extern char __init_begin, __init_end;
/*
* the following code should be cool even if these sections
* are not page aligned.
*/
- addr = PAGE_ALIGN((unsigned long)(&__init_begin));
+ addr = PAGE_ALIGN((unsigned long)(__init_begin));
/* next to check that the page we free is not a partial page */
- for (; addr + PAGE_SIZE < (unsigned long)(&__init_end); addr +=PAGE_SIZE) {
+ for (; addr + PAGE_SIZE < (unsigned long)__init_end; addr +=PAGE_SIZE) {
ClearPageReserved(virt_to_page(addr));
init_page_count(virt_to_page(addr));
free_page(addr);
totalram_pages++;
}
printk(KERN_INFO "Freeing unused kernel memory: %ldk freed (0x%x - 0x%x)\n",
- (addr - PAGE_ALIGN((long) &__init_begin)) >> 10,
- (int)(PAGE_ALIGN((unsigned long)(&__init_begin))),
+ (addr - PAGE_ALIGN((long) __init_begin)) >> 10,
+ (int)(PAGE_ALIGN((unsigned long)__init_begin)),
(int)(addr - PAGE_SIZE));
#endif
}
return err;
}
-static void kvmppc_update_vpa(struct kvm *kvm, struct kvmppc_vpa *vpap)
+static void kvmppc_update_vpa(struct kvm_vcpu *vcpu, struct kvmppc_vpa *vpap)
{
+ struct kvm *kvm = vcpu->kvm;
void *va;
unsigned long nb;
+ unsigned long gpa;
- vpap->update_pending = 0;
- va = NULL;
- if (vpap->next_gpa) {
- va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
- if (nb < vpap->len) {
- /*
- * If it's now too short, it must be that userspace
- * has changed the mappings underlying guest memory,
- * so unregister the region.
- */
+ /*
+ * We need to pin the page pointed to by vpap->next_gpa,
+ * but we can't call kvmppc_pin_guest_page under the lock
+ * as it does get_user_pages() and down_read(). So we
+ * have to drop the lock, pin the page, then get the lock
+ * again and check that a new area didn't get registered
+ * in the meantime.
+ */
+ for (;;) {
+ gpa = vpap->next_gpa;
+ spin_unlock(&vcpu->arch.vpa_update_lock);
+ va = NULL;
+ nb = 0;
+ if (gpa)
+ va = kvmppc_pin_guest_page(kvm, vpap->next_gpa, &nb);
+ spin_lock(&vcpu->arch.vpa_update_lock);
+ if (gpa == vpap->next_gpa)
+ break;
+ /* sigh... unpin that one and try again */
+ if (va)
kvmppc_unpin_guest_page(kvm, va);
- va = NULL;
- }
+ }
+
+ vpap->update_pending = 0;
+ if (va && nb < vpap->len) {
+ /*
+ * If it's now too short, it must be that userspace
+ * has changed the mappings underlying guest memory,
+ * so unregister the region.
+ */
+ kvmppc_unpin_guest_page(kvm, va);
+ va = NULL;
}
if (vpap->pinned_addr)
kvmppc_unpin_guest_page(kvm, vpap->pinned_addr);
static void kvmppc_update_vpas(struct kvm_vcpu *vcpu)
{
- struct kvm *kvm = vcpu->kvm;
-
spin_lock(&vcpu->arch.vpa_update_lock);
if (vcpu->arch.vpa.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.vpa);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.vpa);
init_vpa(vcpu, vcpu->arch.vpa.pinned_addr);
}
if (vcpu->arch.dtl.update_pending) {
- kvmppc_update_vpa(kvm, &vcpu->arch.dtl);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.dtl);
vcpu->arch.dtl_ptr = vcpu->arch.dtl.pinned_addr;
vcpu->arch.dtl_index = 0;
}
if (vcpu->arch.slb_shadow.update_pending)
- kvmppc_update_vpa(kvm, &vcpu->arch.slb_shadow);
+ kvmppc_update_vpa(vcpu, &vcpu->arch.slb_shadow);
spin_unlock(&vcpu->arch.vpa_update_lock);
}
struct kvm_vcpu *vcpu, *vcpu0, *vnext;
long ret;
u64 now;
- int ptid, i;
+ int ptid, i, need_vpa_update;
/* don't start if any threads have a signal pending */
- list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ need_vpa_update = 0;
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
if (signal_pending(vcpu->arch.run_task))
return 0;
+ need_vpa_update |= vcpu->arch.vpa.update_pending |
+ vcpu->arch.slb_shadow.update_pending |
+ vcpu->arch.dtl.update_pending;
+ }
+
+ /*
+ * Initialize *vc, in particular vc->vcore_state, so we can
+ * drop the vcore lock if necessary.
+ */
+ vc->n_woken = 0;
+ vc->nap_count = 0;
+ vc->entry_exit_count = 0;
+ vc->vcore_state = VCORE_RUNNING;
+ vc->in_guest = 0;
+ vc->napping_threads = 0;
+
+ /*
+ * Updating any of the vpas requires calling kvmppc_pin_guest_page,
+ * which can't be called with any spinlocks held.
+ */
+ if (need_vpa_update) {
+ spin_unlock(&vc->lock);
+ list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list)
+ kvmppc_update_vpas(vcpu);
+ spin_lock(&vc->lock);
+ }
/*
* Make sure we are running on thread 0, and that
if (vcpu->arch.ceded)
vcpu->arch.ptid = ptid++;
- vc->n_woken = 0;
- vc->nap_count = 0;
- vc->entry_exit_count = 0;
- vc->vcore_state = VCORE_RUNNING;
vc->stolen_tb += mftb() - vc->preempt_tb;
- vc->in_guest = 0;
vc->pcpu = smp_processor_id();
- vc->napping_threads = 0;
list_for_each_entry(vcpu, &vc->runnable_threads, arch.run_list) {
kvmppc_start_thread(vcpu);
- if (vcpu->arch.vpa.update_pending ||
- vcpu->arch.slb_shadow.update_pending ||
- vcpu->arch.dtl.update_pending)
- kvmppc_update_vpas(vcpu);
kvmppc_create_dtl_entry(vcpu, vc);
}
/* Grab any remaining hw threads so they can't go into the kernel */
};
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len);
+ enum kmsg_dump_reason reason);
static struct kmsg_dumper nvram_kmsg_dumper = {
.dump = oops_to_nvram
return 0;
}
-/*
- * Try to capture the last capture_len bytes of the printk buffer. Return
- * the amount actually captured.
- */
-static size_t capture_last_msgs(const char *old_msgs, size_t old_len,
- const char *new_msgs, size_t new_len,
- char *captured, size_t capture_len)
-{
- if (new_len >= capture_len) {
- memcpy(captured, new_msgs + (new_len - capture_len),
- capture_len);
- return capture_len;
- } else {
- /* Grab the end of old_msgs. */
- size_t old_tail_len = min(old_len, capture_len - new_len);
- memcpy(captured, old_msgs + (old_len - old_tail_len),
- old_tail_len);
- memcpy(captured + old_tail_len, new_msgs, new_len);
- return old_tail_len + new_len;
- }
-}
-
/*
* Are we using the ibm,rtas-log for oops/panic reports? And if so,
* would logging this oops/panic overwrite an RTAS event that rtas_errd
NVRAM_RTAS_READ_TIMEOUT);
}
-/* Squeeze out each line's <n> severity prefix. */
-static size_t elide_severities(char *buf, size_t len)
-{
- char *in, *out, *buf_end = buf + len;
- /* Assume a <n> at the very beginning marks the start of a line. */
- int newline = 1;
-
- in = out = buf;
- while (in < buf_end) {
- if (newline && in+3 <= buf_end &&
- *in == '<' && isdigit(in[1]) && in[2] == '>') {
- in += 3;
- newline = 0;
- } else {
- newline = (*in == '\n');
- *out++ = *in++;
- }
- }
- return out - buf;
-}
-
/* Derived from logfs_compress() */
static int nvram_compress(const void *in, void *out, size_t inlen,
size_t outlen)
* partition. If that's too much, go back and capture uncompressed text.
*/
static void oops_to_nvram(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *old_msgs, unsigned long old_len,
- const char *new_msgs, unsigned long new_len)
+ enum kmsg_dump_reason reason)
{
static unsigned int oops_count = 0;
static bool panicking = false;
return;
if (big_oops_buf) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, big_oops_buf, big_oops_buf_sz);
- text_len = elide_severities(big_oops_buf, text_len);
+ kmsg_dump_get_buffer(dumper, false,
+ big_oops_buf, big_oops_buf_sz, &text_len);
rc = zip_oops(text_len);
}
if (rc != 0) {
- text_len = capture_last_msgs(old_msgs, old_len,
- new_msgs, new_len, oops_data, oops_data_sz);
+ kmsg_dump_rewind(dumper);
+ kmsg_dump_get_buffer(dumper, true,
+ oops_data, oops_data_sz, &text_len);
err_type = ERR_TYPE_KERNEL_PANIC;
*oops_len = (u16) text_len;
}
root_vdev = vio_create_one(hp, root, NULL);
err = -ENODEV;
if (!root_vdev) {
- printk(KERN_ERR "VIO: Coult not create root device.\n");
+ printk(KERN_ERR "VIO: Could not create root device.\n");
goto out_release;
}
* they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
* operations.
*
- * Without THP if the mmap_sem is hold for reading, the
- * pmd can only transition from null to not null while pmd_read_atomic runs.
- * So there's no need of literally reading it atomically.
+ * Without THP if the mmap_sem is hold for reading, the pmd can only
+ * transition from null to not null while pmd_read_atomic runs. So
+ * we can always return atomic pmd values with this function.
*
* With THP if the mmap_sem is hold for reading, the pmd can become
- * THP or null or point to a pte (and in turn become "stable") at any
- * time under pmd_read_atomic, so it's mandatory to read it atomically
- * with cmpxchg8b.
+ * trans_huge or none or point to a pte (and in turn become "stable")
+ * at any time under pmd_read_atomic. We could read it really
+ * atomically here with a atomic64_read for the THP enabled case (and
+ * it would be a whole lot simpler), but to avoid using cmpxchg8b we
+ * only return an atomic pmdval if the low part of the pmdval is later
+ * found stable (i.e. pointing to a pte). And we're returning a none
+ * pmdval if the low part of the pmd is none. In some cases the high
+ * and low part of the pmdval returned may not be consistent if THP is
+ * enabled (the low part may point to previously mapped hugepage,
+ * while the high part may point to a more recently mapped hugepage),
+ * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
+ * of the pmd to be read atomically to decide if the pmd is unstable
+ * or not, with the only exception of when the low part of the pmd is
+ * zero in which case we return a none pmd.
*/
-#ifndef CONFIG_TRANSPARENT_HUGEPAGE
static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
{
pmdval_t ret;
return (pmd_t) { ret };
}
-#else /* CONFIG_TRANSPARENT_HUGEPAGE */
-static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
-{
- return (pmd_t) { atomic64_read((atomic64_t *)pmdp) };
-}
-#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
{
static int dumper_registered;
static void dw_kmsg_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- int i;
+ static char line[1024];
+ size_t len;
/* When run to this, we'd better re-init the HW */
mrst_early_console_init();
- for (i = 0; i < l1; i++)
- early_mrst_console.write(&early_mrst_console, s1 + i, 1);
- for (i = 0; i < l2; i++)
- early_mrst_console.write(&early_mrst_console, s2 + i, 1);
+ while (kmsg_dump_get_line(dumper, true, line, sizeof(line), &len))
+ early_mrst_console.write(&early_mrst_console, line, len);
}
/* Set the ratio rate to 115200, 8n1, IRQ disabled */
# Only build variant and/or platform if it includes a Makefile
-buildvar := $(shell test -a $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
-buildplf := $(shell test -a $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
+buildvar := $(shell test -e $(srctree)/arch/xtensa/variants/$(VARIANT)/Makefile && echo arch/xtensa/variants/$(VARIANT)/)
+buildplf := $(shell test -e $(srctree)/arch/xtensa/platforms/$(PLATFORM)/Makefile && echo arch/xtensa/platforms/$(PLATFORM)/)
# Find libgcc.a
_text = .;
_stext = .;
- _ftext = .;
.text :
{
EXCEPTION_TABLE(16)
/* Data section */
- _fdata = .;
+ _sdata = .;
RW_DATA_SECTION(XCHAL_ICACHE_LINESIZE, PAGE_SIZE, THREAD_SIZE)
_edata = .;
#include <asm/bootparam.h>
#include <asm/page.h>
-
-/* References to section boundaries */
-
-extern char _ftext, _etext, _fdata, _edata, _rodata_end;
-extern char __init_begin, __init_end;
+#include <asm/sections.h>
/*
* mem_reserve(start, end, must_exist)
reservedpages++;
}
- codesize = (unsigned long) &_etext - (unsigned long) &_ftext;
- datasize = (unsigned long) &_edata - (unsigned long) &_fdata;
- initsize = (unsigned long) &__init_end - (unsigned long) &__init_begin;
+ codesize = (unsigned long) _etext - (unsigned long) _stext;
+ datasize = (unsigned long) _edata - (unsigned long) _sdata;
+ initsize = (unsigned long) __init_end - (unsigned long) __init_begin;
printk("Memory: %luk/%luk available (%ldk kernel code, %ldk reserved, "
"%ldk data, %ldk init %ldk highmem)\n",
void free_initmem(void)
{
- free_reserved_mem(&__init_begin, &__init_end);
- printk("Freeing unused kernel memory: %dk freed\n",
- (&__init_end - &__init_begin) >> 10);
+ free_reserved_mem(__init_begin, __init_end);
+ printk("Freeing unused kernel memory: %zuk freed\n",
+ (__init_end - __init_begin) >> 10);
}
* Arasan Compact Flash host controller source file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
module_platform_driver(arasan_cf_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("Arasan ATA Compact Flash driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRIVER_NAME);
mutex_lock(&deferred_probe_mutex);
if (list_empty(&dev->p->deferred_probe)) {
dev_dbg(dev, "Added to deferred list\n");
- list_add(&dev->p->deferred_probe, &deferred_probe_pending_list);
+ list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
}
mutex_unlock(&deferred_probe_mutex);
}
u32 *data = buf;
/* data ready? */
- if (readl(trng->base + TRNG_ODATA) & 1) {
+ if (readl(trng->base + TRNG_ISR) & 1) {
*data = readl(trng->base + TRNG_ODATA);
/*
ensure data ready is only set again AFTER the next data
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
/*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Clock framework definitions for SPEAr platform
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1310 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr1340 machine clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr3xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* SPEAr6xx machines clock framework source file
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("Synopsys DesignWare DMA Controller driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
init_completion(&sdmac->done);
- sdmac->buf_tail = 0;
-
return 0;
out:
sdmac->flags = 0;
+ sdmac->buf_tail = 0;
+
dev_dbg(sdma->dev, "setting up %d entries for channel %d.\n",
sg_len, channel);
sdmac->status = DMA_IN_PROGRESS;
+ sdmac->buf_tail = 0;
+
sdmac->flags |= IMX_DMA_SG_LOOP;
sdmac->direction = direction;
ret = sdma_load_context(sdmac);
struct pl330_reqcfg *cfg;
/* Pointer to first xfer in the request. */
struct pl330_xfer *x;
+ /* Hook to attach to DMAC's list of reqs with due callback */
+ struct list_head rqd;
};
/*
/* Number of bytes taken to setup MC for the req */
u32 mc_len;
struct pl330_req *r;
- /* Hook to attach to DMAC's list of reqs with due callback */
- struct list_head rqd;
};
/* ToBeDone for tasklet */
/* Returns 1 if state was updated, 0 otherwise */
static int pl330_update(const struct pl330_info *pi)
{
- struct _pl330_req *rqdone;
+ struct pl330_req *rqdone, *tmp;
struct pl330_dmac *pl330;
unsigned long flags;
void __iomem *regs;
if (active == -1) /* Aborted */
continue;
- rqdone = &thrd->req[active];
+ /* Detach the req */
+ rqdone = thrd->req[active].r;
+ thrd->req[active].r = NULL;
+
mark_free(thrd, active);
/* Get going again ASAP */
}
/* Now that we are in no hurry, do the callbacks */
- while (!list_empty(&pl330->req_done)) {
- struct pl330_req *r;
-
- rqdone = container_of(pl330->req_done.next,
- struct _pl330_req, rqd);
-
- list_del_init(&rqdone->rqd);
-
- /* Detach the req */
- r = rqdone->r;
- rqdone->r = NULL;
+ list_for_each_entry_safe(rqdone, tmp, &pl330->req_done, rqd) {
+ list_del(&rqdone->rqd);
spin_unlock_irqrestore(&pl330->lock, flags);
- _callback(r, PL330_ERR_NONE);
+ _callback(rqdone, PL330_ERR_NONE);
spin_lock_irqsave(&pl330->lock, flags);
}
/* Pick up ripe tomatoes */
list_for_each_entry_safe(desc, _dt, &pch->work_list, node)
if (desc->status == DONE) {
- if (pch->cyclic)
+ if (!pch->cyclic)
dma_cookie_complete(&desc->txd);
list_move_tail(&desc->node, &list);
}
}
/* Returns the number of descriptors added to the DMAC pool */
-int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
+static int add_desc(struct dma_pl330_dmac *pdmac, gfp_t flg, int count)
{
struct dma_pl330_desc *desc;
unsigned long flags;
else
return (char *)ptr;
- r = size % align;
+ r = (unsigned long)p % align;
if (r == 0)
return (char *)ptr;
if (mce->bank != 8)
return NOTIFY_DONE;
-#ifdef CONFIG_SMP
- /* Only handle if it is the right mc controller */
- if (mce->socketid != pvt->i7core_dev->socket)
- return NOTIFY_DONE;
-#endif
-
smp_rmb();
if ((pvt->mce_out + 1) % MCE_LOG_LEN == pvt->mce_in) {
smp_wmb();
if (pvt->enable_scrub)
disable_sdram_scrub_setting(mci);
- mce_unregister_decode_chain(&i7_mce_dec);
-
/* Disable EDAC polling */
i7core_pci_ctl_release(pvt);
/* DCLK for scrub rate setting */
pvt->dclk_freq = get_dclk_freq();
- mce_register_decode_chain(&i7_mce_dec);
-
return 0;
fail0:
pci_rc = pci_register_driver(&i7core_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&i7_mce_dec);
return 0;
+ }
i7core_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&i7core_driver);
+ mce_unregister_decode_chain(&i7_mce_dec);
}
module_init(i7core_init);
layers[1].type = EDAC_MC_LAYER_CHANNEL;
layers[1].size = 1;
layers[1].is_virt_csrow = false;
- mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), sizeof(*pdata));
+ mci = edac_mc_alloc(edac_mc_idx, ARRAY_SIZE(layers), layers,
+ sizeof(*pdata));
if (!mci) {
devres_release_group(&op->dev, mpc85xx_mc_err_probe);
return -ENOMEM;
pvt->is_close_pg = false;
}
- pci_read_config_dword(pvt->pci_ta, RANK_CFG_A, ®);
+ pci_read_config_dword(pvt->pci_ddrio, RANK_CFG_A, ®);
if (IS_RDIMM_ENABLED(reg)) {
/* FIXME: Can also be LRDIMM */
debugf0("Memory is registered\n");
debugf0("MC: " __FILE__ ": %s(): mci = %p, dev = %p\n",
__func__, mci, &sbridge_dev->pdev[0]->dev);
- mce_unregister_decode_chain(&sbridge_mce_dec);
-
/* Remove MC sysfs nodes */
edac_mc_del_mc(mci->dev);
goto fail0;
}
- mce_register_decode_chain(&sbridge_mce_dec);
return 0;
fail0:
pci_rc = pci_register_driver(&sbridge_driver);
- if (pci_rc >= 0)
+ if (pci_rc >= 0) {
+ mce_register_decode_chain(&sbridge_mce_dec);
return 0;
+ }
sbridge_printk(KERN_ERR, "Failed to register device with error %d.\n",
pci_rc);
{
debugf2("MC: " __FILE__ ": %s()\n", __func__);
pci_unregister_driver(&sbridge_driver);
+ mce_unregister_decode_chain(&sbridge_mce_dec);
}
module_init(sbridge_init);
[5] = "Charge-downstream",
[6] = "MHL",
[7] = "Dock-desk",
- [7] = "Dock-card",
- [8] = "JIG",
+ [8] = "Dock-card",
+ [9] = "JIG",
NULL,
};
extcon_dev_unregister(info->edev);
+ kfree(info->edev);
kfree(info);
return 0;
#if defined(CONFIG_ANDROID)
if (switch_class)
ret = class_compat_create_link(switch_class, edev->dev,
- dev);
+ NULL);
#endif /* CONFIG_ANDROID */
spin_lock_init(&edev->lock);
if (ret < 0)
goto err_request_irq;
+ platform_set_drvdata(pdev, extcon_data);
/* Perform initial detection */
gpio_extcon_work(&extcon_data->work.work);
struct gpio_extcon_data *extcon_data = platform_get_drvdata(pdev);
cancel_delayed_work_sync(&extcon_data->work);
+ free_irq(extcon_data->irq, extcon_data);
gpio_free(extcon_data->gpio);
extcon_dev_unregister(&extcon_data->edev);
devm_kfree(&pdev->dev, extcon_data);
drm_monitor_supports_rb(struct edid *edid)
{
if (edid->revision >= 4) {
- bool ret;
+ bool ret = false;
drm_for_each_detailed_block((u8 *)edid, is_rb, &ret);
return ret;
}
if (I915_READ(HDMIC) & PORT_DETECTED)
intel_hdmi_init(dev, HDMIC);
- if (I915_READ(HDMID) & PORT_DETECTED)
+ if (!dpd_is_edp && I915_READ(HDMID) & PORT_DETECTED)
intel_hdmi_init(dev, HDMID);
if (I915_READ(PCH_DP_C) & DP_DETECTED)
#include "drm.h"
#include "drm_crtc.h"
#include "drm_crtc_helper.h"
+#include "drm_edid.h"
#include "intel_drv.h"
#include "i915_drm.h"
#include "i915_drv.h"
struct drm_display_mode *panel_fixed_mode; /* for eDP */
struct delayed_work panel_vdd_work;
bool want_panel_vdd;
+ struct edid *edid; /* cached EDID for eDP */
+ int edid_mode_count;
};
/**
int recv_bytes;
uint32_t status;
uint32_t aux_clock_divider;
- int try, precharge = 5;
+ int try, precharge;
intel_dp_check_edp(intel_dp);
/* The clock divider is based off the hrawclk,
else
aux_clock_divider = intel_hrawclk(dev) / 2;
+ if (IS_GEN6(dev))
+ precharge = 3;
+ else
+ precharge = 5;
+
/* Try to wait for any previous AUX channel activity */
for (try = 0; try < 3; try++) {
status = I915_READ(ch_ctl);
if (!(intel_dp->dpcd[DP_DOWN_STREAM_PORT_COUNT] & DP_OUI_SUPPORT))
return;
+ ironlake_edp_panel_vdd_on(intel_dp);
+
if (intel_dp_aux_native_read_retry(intel_dp, DP_SINK_OUI, buf, 3))
DRM_DEBUG_KMS("Sink OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
if (intel_dp_aux_native_read_retry(intel_dp, DP_BRANCH_OUI, buf, 3))
DRM_DEBUG_KMS("Branch OUI: %02hx%02hx%02hx\n",
buf[0], buf[1], buf[2]);
+
+ ironlake_edp_panel_vdd_off(intel_dp, false);
}
static bool
{
struct intel_dp *intel_dp = intel_attached_dp(connector);
struct edid *edid;
+ int size;
+
+ if (is_edp(intel_dp)) {
+ if (!intel_dp->edid)
+ return NULL;
+
+ size = (intel_dp->edid->extensions + 1) * EDID_LENGTH;
+ edid = kmalloc(size, GFP_KERNEL);
+ if (!edid)
+ return NULL;
+
+ memcpy(edid, intel_dp->edid, size);
+ return edid;
+ }
- ironlake_edp_panel_vdd_on(intel_dp);
edid = drm_get_edid(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return edid;
}
struct intel_dp *intel_dp = intel_attached_dp(connector);
int ret;
- ironlake_edp_panel_vdd_on(intel_dp);
+ if (is_edp(intel_dp)) {
+ drm_mode_connector_update_edid_property(connector,
+ intel_dp->edid);
+ ret = drm_add_edid_modes(connector, intel_dp->edid);
+ drm_edid_to_eld(connector,
+ intel_dp->edid);
+ connector->display_info.raw_edid = NULL;
+ return intel_dp->edid_mode_count;
+ }
+
ret = intel_ddc_get_modes(connector, adapter);
- ironlake_edp_panel_vdd_off(intel_dp, false);
return ret;
}
i2c_del_adapter(&intel_dp->adapter);
drm_encoder_cleanup(encoder);
if (is_edp(intel_dp)) {
+ kfree(intel_dp->edid);
cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
ironlake_panel_vdd_off_sync(intel_dp);
}
break;
}
+ intel_dp_i2c_init(intel_dp, intel_connector, name);
+
/* Cache some DPCD data in the eDP case */
if (is_edp(intel_dp)) {
bool ret;
struct edp_power_seq cur, vbt;
u32 pp_on, pp_off, pp_div;
+ struct edid *edid;
pp_on = I915_READ(PCH_PP_ON_DELAYS);
pp_off = I915_READ(PCH_PP_OFF_DELAYS);
intel_dp_destroy(&intel_connector->base);
return;
}
- }
- intel_dp_i2c_init(intel_dp, intel_connector, name);
+ ironlake_edp_panel_vdd_on(intel_dp);
+ edid = drm_get_edid(connector, &intel_dp->adapter);
+ if (edid) {
+ drm_mode_connector_update_edid_property(connector,
+ edid);
+ intel_dp->edid_mode_count =
+ drm_add_edid_modes(connector, edid);
+ drm_edid_to_eld(connector, edid);
+ intel_dp->edid = edid;
+ }
+ ironlake_edp_panel_vdd_off(intel_dp, false);
+ }
intel_encoder->hot_plug = intel_dp_hot_plug;
}
if (tiling_flags & RADEON_TILING_MACRO) {
- if (rdev->family >= CHIP_CAYMAN)
+ if (rdev->family >= CHIP_TAHITI)
+ tmp = rdev->config.si.tile_config;
+ else if (rdev->family >= CHIP_CAYMAN)
tmp = rdev->config.cayman.tile_config;
else
tmp = rdev->config.evergreen.tile_config;
} else if (tiling_flags & RADEON_TILING_MICRO)
fb_format |= EVERGREEN_GRPH_ARRAY_MODE(EVERGREEN_GRPH_ARRAY_1D_TILED_THIN1);
+ if ((rdev->family == CHIP_TAHITI) ||
+ (rdev->family == CHIP_PITCAIRN))
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P8_32x32_8x16);
+ else if (rdev->family == CHIP_VERDE)
+ fb_format |= SI_GRPH_PIPE_CONFIG(SI_ADDR_SURF_P4_8x16);
+
switch (radeon_crtc->crtc_id) {
case 0:
WREG32(AVIVO_D1VGA_CONTROL, 0);
if (atombios_get_encoder_mode(encoder) == ATOM_ENCODER_MODE_HDMI) {
r600_hdmi_enable(encoder);
- if (ASIC_IS_DCE4(rdev))
+ if (ASIC_IS_DCE6(rdev))
+ ; /* TODO (use pointers instead of if-s?) */
+ else if (ASIC_IS_DCE4(rdev))
evergreen_hdmi_setmode(encoder, adjusted_mode);
else
r600_hdmi_setmode(encoder, adjusted_mode);
smx_dc_ctl0 |= NUMBER_OF_SETS(rdev->config.evergreen.sx_num_of_sets);
WREG32(SMX_DC_CTL0, smx_dc_ctl0);
+ if (rdev->family <= CHIP_SUMO2)
+ WREG32(SMX_SAR_CTL0, 0x00010000);
+
WREG32(SX_EXPORT_BUFFER_SIZES, (COLOR_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_size / 4) - 1) |
POSITION_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_pos_size / 4) - 1) |
SMX_BUFFER_SIZE((rdev->config.evergreen.sx_max_export_smx_size / 4) - 1)));
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define NUMBER_OF_SETS(x) ((x) << 1)
if (r)
return r;
+ r = r600_audio_init(rdev);
+ if (r)
+ return r;
+
return 0;
}
int cayman_suspend(struct radeon_device *rdev)
{
+ r600_audio_fini(rdev);
/* FIXME: we should wait for ring to be empty */
radeon_ib_pool_suspend(rdev);
radeon_vm_manager_suspend(rdev);
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
WREG32(PA_SC_ENHANCE, FORCE_EOV_MAX_CLK_CNT(4095));
+ WREG32(VC_ENHANCE, 0);
}
*/
static int r600_audio_chipset_supported(struct radeon_device *rdev)
{
- return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE5(rdev))
+ return (rdev->family >= CHIP_R600 && !ASIC_IS_DCE6(rdev))
|| rdev->family == CHIP_RS600
|| rdev->family == CHIP_RS690
|| rdev->family == CHIP_RS740;
return -EINVAL;
}
break;
+ case PACKET3_STRMOUT_BASE_UPDATE:
+ if (p->family < CHIP_RV770) {
+ DRM_ERROR("STRMOUT_BASE_UPDATE only supported on 7xx\n");
+ return -EINVAL;
+ }
+ if (pkt->count != 1) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE packet count\n");
+ return -EINVAL;
+ }
+ if (idx_value > 3) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE index\n");
+ return -EINVAL;
+ }
+ {
+ u64 offset;
+
+ r = r600_cs_packet_next_reloc(p, &reloc);
+ if (r) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE reloc\n");
+ return -EINVAL;
+ }
+
+ if (reloc->robj != track->vgt_strmout_bo[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo does not match\n");
+ return -EINVAL;
+ }
+
+ offset = radeon_get_ib_value(p, idx+1) << 8;
+ if (offset != track->vgt_strmout_bo_offset[idx_value]) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE, bo offset does not match: 0x%llx, 0x%x\n",
+ offset, track->vgt_strmout_bo_offset[idx_value]);
+ return -EINVAL;
+ }
+
+ if ((offset + 4) > radeon_bo_size(reloc->robj)) {
+ DRM_ERROR("bad STRMOUT_BASE_UPDATE bo too small: 0x%llx, 0x%lx\n",
+ offset + 4, radeon_bo_size(reloc->robj));
+ return -EINVAL;
+ }
+ ib[idx+1] += (u32)((reloc->lobj.gpu_offset >> 8) & 0xffffffff);
+ }
+ break;
case PACKET3_SURFACE_BASE_UPDATE:
if (p->family >= CHIP_RV770 || p->family == CHIP_R600) {
DRM_ERROR("bad SURFACE_BASE_UPDATE\n");
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
- return;
-
/* Silent, r600_hdmi_enable will raise WARN for us */
if (!dig->afmt->enabled)
return;
uint32_t offset;
u32 hdmi;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Silent, r600_hdmi_enable will raise WARN for us */
struct radeon_encoder_atom_dig *dig = radeon_encoder->enc_priv;
uint32_t offset;
- if (ASIC_IS_DCE5(rdev))
+ if (ASIC_IS_DCE6(rdev))
return;
/* Called for ATOM_ENCODER_MODE_HDMI only */
#define TC_L2_SIZE(x) ((x)<<5)
#define L2_DISABLE_LATE_HIT (1<<9)
+#define VC_ENHANCE 0x9714
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define PACKET3_SET_CTL_CONST 0x6F
#define PACKET3_SET_CTL_CONST_OFFSET 0x0003cff0
#define PACKET3_SET_CTL_CONST_END 0x0003e200
+#define PACKET3_STRMOUT_BASE_UPDATE 0x72 /* r7xx */
#define PACKET3_SURFACE_BASE_UPDATE 0x73
* 2.14.0 - add evergreen tiling informations
* 2.15.0 - add max_pipes query
* 2.16.0 - fix evergreen 2D tiled surface calculation
+ * 2.17.0 - add STRMOUT_BASE_UPDATE for r7xx
*/
#define KMS_DRIVER_MAJOR 2
-#define KMS_DRIVER_MINOR 16
+#define KMS_DRIVER_MINOR 17
#define KMS_DRIVER_PATCHLEVEL 0
int radeon_driver_load_kms(struct drm_device *dev, unsigned long flags);
int radeon_driver_unload_kms(struct drm_device *dev);
int i;
for (i = 0; i < RADEON_NUM_RINGS; ++i) {
- not_processed += radeon_fence_count_emitted(rdev, i);
- if (not_processed >= 3)
- break;
+ struct radeon_ring *ring = &rdev->ring[i];
+
+ if (ring->ready) {
+ not_processed += radeon_fence_count_emitted(rdev, i);
+ if (not_processed >= 3)
+ break;
+ }
}
if (not_processed >= 3) { /* should upclock */
struct radeon_bo *bo = gem_to_radeon_bo(obj);
int ret = 0;
+ ret = radeon_bo_reserve(bo, false);
+ if (unlikely(ret != 0))
+ return ERR_PTR(ret);
+
/* pin buffer into GTT */
ret = radeon_bo_pin(bo, RADEON_GEM_DOMAIN_GTT, NULL);
- if (ret)
+ if (ret) {
+ radeon_bo_unreserve(bo);
return ERR_PTR(ret);
-
+ }
+ radeon_bo_unreserve(bo);
return dma_buf_export(bo, &radeon_dmabuf_ops, obj->size, flags);
}
ACK_FLUSH_CTL(3) |
SYNC_FLUSH_CTL));
+ if (rdev->family != CHIP_RV770)
+ WREG32(SMX_SAR_CTL0, 0x00003f3f);
+
db_debug3 = RREG32(DB_DEBUG3);
db_debug3 &= ~DB_CLK_OFF_DELAY(0x1f);
switch (rdev->family) {
WREG32(PA_CL_ENHANCE, (CLIP_VTX_REORDER_ENA |
NUM_CLIP_SEQ(3)));
-
+ WREG32(VC_ENHANCE, 0);
}
void r700_vram_gtt_location(struct radeon_device *rdev, struct radeon_mc *mc)
#define SCRATCH_UMSK 0x8540
#define SCRATCH_ADDR 0x8544
+#define SMX_SAR_CTL0 0xA008
#define SMX_DC_CTL0 0xA020
#define USE_HASH_FUNCTION (1 << 0)
#define CACHE_DEPTH(x) ((x) << 1)
#define TCP_CNTL 0x9610
#define TCP_CHAN_STEER 0x9614
+#define VC_ENHANCE 0x9714
+
#define VGT_CACHE_INVALIDATION 0x88C4
#define CACHE_INVALIDATION(x) ((x)<<0)
#define VC_ONLY 0
#define SI_DC_GPIO_HPD_EN 0x65b8
#define SI_DC_GPIO_HPD_Y 0x65bc
+#define SI_GRPH_CONTROL 0x6804
+# define SI_GRPH_DEPTH(x) (((x) & 0x3) << 0)
+# define SI_GRPH_DEPTH_8BPP 0
+# define SI_GRPH_DEPTH_16BPP 1
+# define SI_GRPH_DEPTH_32BPP 2
+# define SI_GRPH_NUM_BANKS(x) (((x) & 0x3) << 2)
+# define SI_ADDR_SURF_2_BANK 0
+# define SI_ADDR_SURF_4_BANK 1
+# define SI_ADDR_SURF_8_BANK 2
+# define SI_ADDR_SURF_16_BANK 3
+# define SI_GRPH_Z(x) (((x) & 0x3) << 4)
+# define SI_GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6)
+# define SI_ADDR_SURF_BANK_WIDTH_1 0
+# define SI_ADDR_SURF_BANK_WIDTH_2 1
+# define SI_ADDR_SURF_BANK_WIDTH_4 2
+# define SI_ADDR_SURF_BANK_WIDTH_8 3
+# define SI_GRPH_FORMAT(x) (((x) & 0x7) << 8)
+/* 8 BPP */
+# define SI_GRPH_FORMAT_INDEXED 0
+/* 16 BPP */
+# define SI_GRPH_FORMAT_ARGB1555 0
+# define SI_GRPH_FORMAT_ARGB565 1
+# define SI_GRPH_FORMAT_ARGB4444 2
+# define SI_GRPH_FORMAT_AI88 3
+# define SI_GRPH_FORMAT_MONO16 4
+# define SI_GRPH_FORMAT_BGRA5551 5
+/* 32 BPP */
+# define SI_GRPH_FORMAT_ARGB8888 0
+# define SI_GRPH_FORMAT_ARGB2101010 1
+# define SI_GRPH_FORMAT_32BPP_DIG 2
+# define SI_GRPH_FORMAT_8B_ARGB2101010 3
+# define SI_GRPH_FORMAT_BGRA1010102 4
+# define SI_GRPH_FORMAT_8B_BGRA1010102 5
+# define SI_GRPH_FORMAT_RGB111110 6
+# define SI_GRPH_FORMAT_BGR101111 7
+# define SI_GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11)
+# define SI_ADDR_SURF_BANK_HEIGHT_1 0
+# define SI_ADDR_SURF_BANK_HEIGHT_2 1
+# define SI_ADDR_SURF_BANK_HEIGHT_4 2
+# define SI_ADDR_SURF_BANK_HEIGHT_8 3
+# define SI_GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13)
+# define SI_ADDR_SURF_TILE_SPLIT_64B 0
+# define SI_ADDR_SURF_TILE_SPLIT_128B 1
+# define SI_ADDR_SURF_TILE_SPLIT_256B 2
+# define SI_ADDR_SURF_TILE_SPLIT_512B 3
+# define SI_ADDR_SURF_TILE_SPLIT_1KB 4
+# define SI_ADDR_SURF_TILE_SPLIT_2KB 5
+# define SI_ADDR_SURF_TILE_SPLIT_4KB 6
+# define SI_GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18)
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_1 0
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_2 1
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_4 2
+# define SI_ADDR_SURF_MACRO_TILE_ASPECT_8 3
+# define SI_GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20)
+# define SI_GRPH_ARRAY_LINEAR_GENERAL 0
+# define SI_GRPH_ARRAY_LINEAR_ALIGNED 1
+# define SI_GRPH_ARRAY_1D_TILED_THIN1 2
+# define SI_GRPH_ARRAY_2D_TILED_THIN1 4
+# define SI_GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24)
+# define SI_ADDR_SURF_P2 0
+# define SI_ADDR_SURF_P4_8x16 4
+# define SI_ADDR_SURF_P4_16x16 5
+# define SI_ADDR_SURF_P4_16x32 6
+# define SI_ADDR_SURF_P4_32x32 7
+# define SI_ADDR_SURF_P8_16x16_8x16 8
+# define SI_ADDR_SURF_P8_16x32_8x16 9
+# define SI_ADDR_SURF_P8_32x32_8x16 10
+# define SI_ADDR_SURF_P8_16x32_16x16 11
+# define SI_ADDR_SURF_P8_32x32_16x16 12
+# define SI_ADDR_SURF_P8_32x32_16x32 13
+# define SI_ADDR_SURF_P8_32x64_32x32 14
+
#endif
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
return 0;
}
static struct drm_driver driver;
+/*
+ * There are many DisplayLink-based graphics products, all with unique PIDs.
+ * So we match on DisplayLink's VID + Vendor-Defined Interface Class (0xff)
+ * We also require a match on SubClass (0x00) and Protocol (0x00),
+ * which is compatible with all known USB 2.0 era graphics chips and firmware,
+ * but allows DisplayLink to increment those for any future incompatible chips
+ */
static struct usb_device_id id_table[] = {
- {.idVendor = 0x17e9, .match_flags = USB_DEVICE_ID_MATCH_VENDOR,},
+ {.idVendor = 0x17e9, .bInterfaceClass = 0xff,
+ .bInterfaceSubClass = 0x00,
+ .bInterfaceProtocol = 0x00,
+ .match_flags = USB_DEVICE_ID_MATCH_VENDOR |
+ USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS |
+ USB_DEVICE_ID_MATCH_INT_PROTOCOL,},
{},
};
MODULE_DEVICE_TABLE(usb, id_table);
if (dev_priv == NULL)
return -ENOMEM;
+ idr_init(&dev_priv->object_idr);
dev->dev_private = (void *)dev_priv;
dev_priv->chipset = chipset;
- idr_init(&dev->object_name_idr);
-
pci_set_master(dev->pdev);
ret = drm_vblank_init(dev, 1);
int i;
if (send_command(cmd) || send_argument(key)) {
- pr_warn("%s: read arg fail\n", key);
+ pr_warn("%.4s: read arg fail\n", key);
return -EIO;
}
for (i = 0; i < len; i++) {
if (__wait_status(0x05)) {
- pr_warn("%s: read data fail\n", key);
+ pr_warn("%.4s: read data fail\n", key);
return -EIO;
}
buffer[i] = inb(APPLESMC_DATA_PORT);
return tdata->valid ? sprintf(buf, "%d\n", tdata->temp) : -EAGAIN;
}
+struct tjmax {
+ char const *id;
+ int tjmax;
+};
+
+static struct tjmax __cpuinitconst tjmax_table[] = {
+ { "CPU D410", 100000 },
+ { "CPU D425", 100000 },
+ { "CPU D510", 100000 },
+ { "CPU D525", 100000 },
+ { "CPU N450", 100000 },
+ { "CPU N455", 100000 },
+ { "CPU N470", 100000 },
+ { "CPU N475", 100000 },
+ { "CPU 230", 100000 },
+ { "CPU 330", 125000 },
+};
+
static int __cpuinit adjust_tjmax(struct cpuinfo_x86 *c, u32 id,
struct device *dev)
{
int err;
u32 eax, edx;
struct pci_dev *host_bridge;
+ int i;
+
+ /* explicit tjmax table entries override heuristics */
+ for (i = 0; i < ARRAY_SIZE(tjmax_table); i++) {
+ if (strstr(c->x86_model_id, tjmax_table[i].id))
+ return tjmax_table[i].tjmax;
+ }
/* Early chips have no MSR for TjMax */
/* Atom CPUs */
- if (c->x86_model == 0x1c) {
+ if (c->x86_model == 0x1c || c->x86_model == 0x26
+ || c->x86_model == 0x27) {
usemsr_ee = 0;
host_bridge = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
tjmax = 90000;
pci_dev_put(host_bridge);
+ } else if (c->x86_model == 0x36) {
+ usemsr_ee = 0;
+ tjmax = 100000;
}
if (c->x86_model > 0xe && usemsr_ee) {
static int __init coretemp_init(void)
{
- int i, err = -ENODEV;
+ int i, err;
/*
* CPUID.06H.EAX[0] indicates whether the CPU has thermal
data->fan_rpm_control = true;
break;
default:
- mutex_unlock(&data->update_lock);
- return -EINVAL;
+ count = -EINVAL;
+ goto err;
}
- read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ result = read_u8_from_i2c(client, REG_FAN_CONF1, &conf_reg);
+ if (result) {
+ count = result;
+ goto err;
+ }
if (data->fan_rpm_control)
conf_reg |= 0x80;
conf_reg &= ~0x80;
i2c_smbus_write_byte_data(client, REG_FAN_CONF1, conf_reg);
-
+err:
mutex_unlock(&data->update_lock);
return count;
}
help
The industrial I/O subsystem provides a unified framework for
drivers for many different types of embedded sensors using a
- number of different physical interfaces (i2c, spi, etc). See
- Documentation/iio for more information.
+ number of different physical interfaces (i2c, spi, etc).
if IIO
* New channel registration method - relies on the fact a group does
* not need to be initialized if it is name is NULL.
*/
- INIT_LIST_HEAD(&indio_dev->channel_attr_list);
if (indio_dev->channels)
for (i = 0; i < indio_dev->num_channels; i++) {
ret = iio_device_add_channel_sysfs(indio_dev,
static void iio_dev_release(struct device *device)
{
struct iio_dev *indio_dev = dev_to_iio_dev(device);
- cdev_del(&indio_dev->chrdev);
+ if (indio_dev->chrdev.dev)
+ cdev_del(&indio_dev->chrdev);
if (indio_dev->modes & INDIO_BUFFER_TRIGGERED)
iio_device_unregister_trigger_consumer(indio_dev);
iio_device_unregister_eventset(indio_dev);
iio_device_unregister_sysfs(indio_dev);
iio_device_unregister_debugfs(indio_dev);
+
+ ida_simple_remove(&iio_ida, indio_dev->id);
+ kfree(indio_dev);
}
static struct device_type iio_dev_type = {
dev_set_drvdata(&dev->dev, (void *)dev);
mutex_init(&dev->mlock);
mutex_init(&dev->info_exist_lock);
+ INIT_LIST_HEAD(&dev->channel_attr_list);
dev->id = ida_simple_get(&iio_ida, 0, 0, GFP_KERNEL);
if (dev->id < 0) {
void iio_device_free(struct iio_dev *dev)
{
- if (dev) {
- ida_simple_remove(&iio_ida, dev->id);
- kfree(dev);
- }
+ if (dev)
+ put_device(&dev->dev);
}
EXPORT_SYMBOL(iio_device_free);
mutex_lock(&indio_dev->info_exist_lock);
indio_dev->info = NULL;
mutex_unlock(&indio_dev->info_exist_lock);
- device_unregister(&indio_dev->dev);
+ device_del(&indio_dev->dev);
}
EXPORT_SYMBOL(iio_device_unregister);
subsys_initcall(iio_init);
static int cma_check_req_qp_type(struct rdma_cm_id *id, struct ib_cm_event *ib_event)
{
- return (((ib_event->event == IB_CM_REQ_RECEIVED) ||
+ return (((ib_event->event == IB_CM_REQ_RECEIVED) &&
(ib_event->param.req_rcvd.qp_type == id->qp_type)) ||
((ib_event->event == IB_CM_SIDR_REQ_RECEIVED) &&
(id->qp_type == IB_QPT_UD)) ||
u32 max_inline_data;
int max_send_sge;
int max_recv_sge;
+ int max_srq_sge;
int max_mr;
u64 max_mr_size;
u32 max_num_mr_pbl;
struct ocrdma_dev_attr *attr,
struct ocrdma_mbx_query_config *rsp)
{
- int max_q_mem;
-
attr->max_pd =
(rsp->max_pd_ca_ack_delay & OCRDMA_MBX_QUERY_CFG_MAX_PD_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_PD_SHIFT;
attr->max_recv_sge = (rsp->max_write_send_sge &
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT;
+ attr->max_srq_sge = (rsp->max_srq_rqe_sge &
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_MASK) >>
+ OCRDMA_MBX_QUERY_CFG_MAX_SRQ_SGE_OFFSET;
attr->max_ord_per_qp = (rsp->max_ird_ord_per_qp &
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK) >>
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT;
attr->max_inline_data =
attr->wqe_size - (sizeof(struct ocrdma_hdr_wqe) +
sizeof(struct ocrdma_sge));
- max_q_mem = OCRDMA_Q_PAGE_BASE_SIZE << (OCRDMA_MAX_Q_PAGE_SIZE_CNT - 1);
- /* hw can queue one less then the configured size,
- * so publish less by one to stack.
- */
if (dev->nic_info.dev_family == OCRDMA_GEN2_FAMILY) {
- dev->attr.max_wqe = max_q_mem / dev->attr.wqe_size;
attr->ird = 1;
attr->ird_page_size = OCRDMA_MIN_Q_PAGE_SIZE;
attr->num_ird_pages = MAX_OCRDMA_IRD_PAGES;
- } else
- dev->attr.max_wqe = (max_q_mem / dev->attr.wqe_size) - 1;
- dev->attr.max_rqe = (max_q_mem / dev->attr.rqe_size) - 1;
+ }
+ dev->attr.max_wqe = rsp->max_wqes_rqes_per_q >>
+ OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET;
+ dev->attr.max_rqe = rsp->max_wqes_rqes_per_q &
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK;
}
static int ocrdma_check_fw_config(struct ocrdma_dev *dev,
sgid->raw[15] = mac_addr[5];
}
-static void ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
+static bool ocrdma_add_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
bool is_vlan, u16 vlan_id)
{
int i;
- bool found = false;
union ib_gid new_sgid;
- int free_idx = OCRDMA_MAX_SGID;
unsigned long flags;
memset(&ocrdma_zero_sgid, 0, sizeof(union ib_gid));
if (!memcmp(&dev->sgid_tbl[i], &ocrdma_zero_sgid,
sizeof(union ib_gid))) {
/* found free entry */
- if (!found) {
- free_idx = i;
- found = true;
- break;
- }
+ memcpy(&dev->sgid_tbl[i], &new_sgid,
+ sizeof(union ib_gid));
+ spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return true;
} else if (!memcmp(&dev->sgid_tbl[i], &new_sgid,
sizeof(union ib_gid))) {
/* entry already present, no addition is required. */
spin_unlock_irqrestore(&dev->sgid_lock, flags);
- return;
+ return false;
}
}
- /* if entry doesn't exist and if table has some space, add entry */
- if (found)
- memcpy(&dev->sgid_tbl[free_idx], &new_sgid,
- sizeof(union ib_gid));
spin_unlock_irqrestore(&dev->sgid_lock, flags);
+ return false;
}
static bool ocrdma_del_sgid(struct ocrdma_dev *dev, unsigned char *mac_addr,
ocrdma_get_guid(dev, &sgid->raw[8]);
}
-static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+#if defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
{
struct net_device *netdev, *tmp;
u16 vlan_id;
netdev = dev->nic_info.netdev;
- ocrdma_add_default_sgid(dev);
-
rcu_read_lock();
for_each_netdev_rcu(&init_net, tmp) {
if (netdev == tmp || vlan_dev_real_dev(tmp) == netdev) {
}
}
rcu_read_unlock();
+}
+#else
+static void ocrdma_add_vlan_sgids(struct ocrdma_dev *dev)
+{
+
+}
+#endif /* VLAN */
+
+static int ocrdma_build_sgid_tbl(struct ocrdma_dev *dev)
+{
+ ocrdma_add_default_sgid(dev);
+ ocrdma_add_vlan_sgids(dev);
return 0;
}
-#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)
+#if defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE) || \
+defined(CONFIG_VLAN_8021Q) || defined(CONFIG_VLAN_8021Q_MODULE)
static int ocrdma_inet6addr_event(struct notifier_block *notifier,
unsigned long event, void *ptr)
struct ib_event gid_event;
struct ocrdma_dev *dev;
bool found = false;
+ bool updated = false;
bool is_vlan = false;
u16 vid = 0;
mutex_lock(&dev->dev_lock);
switch (event) {
case NETDEV_UP:
- ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
+ updated = ocrdma_add_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
case NETDEV_DOWN:
- found = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
- if (found) {
- /* found the matching entry, notify
- * the consumers about it
- */
- gid_event.device = &dev->ibdev;
- gid_event.element.port_num = 1;
- gid_event.event = IB_EVENT_GID_CHANGE;
- ib_dispatch_event(&gid_event);
- }
+ updated = ocrdma_del_sgid(dev, netdev->dev_addr, is_vlan, vid);
break;
default:
break;
}
+ if (updated) {
+ /* GID table updated, notify the consumers about it */
+ gid_event.device = &dev->ibdev;
+ gid_event.element.port_num = 1;
+ gid_event.event = IB_EVENT_GID_CHANGE;
+ ib_dispatch_event(&gid_event);
+ }
mutex_unlock(&dev->dev_lock);
return NOTIFY_OK;
}
.notifier_call = ocrdma_inet6addr_event
};
-#endif /* IPV6 */
+#endif /* IPV6 and VLAN */
static enum rdma_link_layer ocrdma_link_layer(struct ib_device *device,
u8 port_num)
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_SEND_SGE_MASK = 0xFFFF,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT = 16,
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_MASK = 0xFFFF <<
+ OCRDMA_MBX_QUERY_CFG_MAX_WRITE_SGE_SHIFT,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_SHIFT = 0,
OCRDMA_MBX_QUERY_CFG_MAX_ORD_PER_QP_MASK = 0xFFFF,
OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET = 0,
OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_MASK = 0xFFFF <<
- OCRDMA_MBX_QUERY_CFG_MAX_WQES_PER_WQ_OFFSET,
+ OCRDMA_MBX_QUERY_CFG_MAX_RQES_PER_RQ_OFFSET,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_OFFSET = 16,
OCRDMA_MBX_QUERY_CFG_MAX_CQ_MASK = 0xFFFF <<
dev = get_ocrdma_dev(ibdev);
memset(sgid, 0, sizeof(*sgid));
- if (index > OCRDMA_MAX_SGID)
+ if (index >= OCRDMA_MAX_SGID)
return -EINVAL;
memcpy(sgid, &dev->sgid_tbl[index], sizeof(*sgid));
IB_DEVICE_SHUTDOWN_PORT |
IB_DEVICE_SYS_IMAGE_GUID |
IB_DEVICE_LOCAL_DMA_LKEY;
- attr->max_sge = dev->attr.max_send_sge;
- attr->max_sge_rd = dev->attr.max_send_sge;
+ attr->max_sge = min(dev->attr.max_send_sge, dev->attr.max_srq_sge);
+ attr->max_sge_rd = 0;
attr->max_cq = dev->attr.max_cq;
attr->max_cqe = dev->attr.max_cqe;
attr->max_mr = dev->attr.max_mr;
min(dev->attr.max_ord_per_qp, dev->attr.max_ird_per_qp);
attr->max_qp_init_rd_atom = dev->attr.max_ord_per_qp;
attr->max_srq = (dev->attr.max_qp - 1);
- attr->max_srq_sge = attr->max_sge;
+ attr->max_srq_sge = attr->max_srq_sge;
attr->max_srq_wr = dev->attr.max_rqe;
attr->local_ca_ack_delay = dev->attr.local_ca_ack_delay;
attr->max_fast_reg_page_list_len = 0;
*stop = true;
expand = false;
}
- } else
+ } else {
+ *polled = true;
expand = ocrdma_update_err_rcqe(ibwc, cqe, qp, status);
+ }
return expand;
}
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/mutex.h>
+#include <linux/slab.h>
#include <linux/uaccess.h>
#include <linux/isa.h>
#include <asm/io.h>
*
* License Terms: GNU General Public License, version 2
* Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/i2c.h>
* Copyright (C) ST Microelectronics SA 2011
*
* License Terms: GNU General Public License, version 2
- * Author: Viresh Kumar <viresh.kumar@st.com> for ST Microelectronics
+ * Author: Viresh Kumar <viresh.linux@gmail.com> for ST Microelectronics
*/
#include <linux/spi/spi.h>
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("STMPE MFD SPI Interface Driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
struct mei_cl *cl,
struct mei_io_list *cmpl_list)
{
- if ((*slots * sizeof(u32)) >= (sizeof(struct mei_msg_hdr) +
+ if ((*slots * sizeof(u32)) < (sizeof(struct mei_msg_hdr) +
sizeof(struct hbm_flow_control))) {
/* return the cancel routine */
list_del(&cb_pos->cb_list);
err = request_threaded_irq(pdev->irq,
NULL,
mei_interrupt_thread_handler,
- 0, mei_driver_name, dev);
+ IRQF_ONESHOT, mei_driver_name, dev);
else
err = request_threaded_irq(pdev->irq,
mei_interrupt_quick_handler,
if (err) {
dev_err(&pdev->dev, "request_threaded_irq failure. irq = %d\n",
pdev->irq);
- goto unmap_memory;
+ goto disable_msi;
}
INIT_DELAYED_WORK(&dev->timer_work, mei_timer);
if (mei_hw_init(dev)) {
mei_disable_interrupts(dev);
flush_scheduled_work();
free_irq(pdev->irq, dev);
+disable_msi:
pci_disable_msi(pdev);
-unmap_memory:
pci_iounmap(pdev, dev->mem_addr);
free_device:
kfree(dev);
pci_release_regions(pdev);
pci_disable_device(pdev);
+
+ misc_deregister(&mei_misc_device);
}
#ifdef CONFIG_PM
static int mei_pci_suspend(struct device *device)
*/
static void __exit mei_exit_module(void)
{
- misc_deregister(&mei_misc_device);
pci_unregister_driver(&mei_driver);
pr_debug("unloaded successfully.\n");
};
static const struct watchdog_info wd_info = {
.identity = INTEL_AMT_WATCHDOG_ID,
- .options = WDIOF_KEEPALIVEPING,
+ .options = WDIOF_KEEPALIVEPING | WDIOF_ALARMONLY,
};
static struct watchdog_device amt_wd_dev = {
if (!err)
mmc_card_set_sleep(host->card);
} else if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~(MMC_STATE_HIGHSPEED | MMC_STATE_HIGHSPEED_200);
mmc_release_host(host);
*/
static int mmc_sd_suspend(struct mmc_host *host)
{
+ int err = 0;
+
BUG_ON(!host);
BUG_ON(!host->card);
mmc_claim_host(host);
if (!mmc_host_is_spi(host))
- mmc_deselect_cards(host);
+ err = mmc_deselect_cards(host);
host->card->state &= ~MMC_STATE_HIGHSPEED;
mmc_release_host(host);
- return 0;
+ return err;
}
/*
if (ret)
return ret;
+ if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED)
+ pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",
+ mmc_hostname(card->host), ctrl);
+
+ /* set as 4-bit bus width */
+ ctrl &= ~SDIO_BUS_WIDTH_MASK;
ctrl |= SDIO_BUS_WIDTH_4BIT;
ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL);
#define atmci_writel(port,reg,value) \
__raw_writel((value), (port)->regs + reg)
+/*
+ * Fix sconfig's burst size according to atmel MCI. We need to convert them as:
+ * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3.
+ *
+ * This can be done by finding most significant bit set.
+ */
+static inline unsigned int atmci_convert_chksize(unsigned int maxburst)
+{
+ if (maxburst > 1)
+ return fls(maxburst) - 2;
+ else
+ return 0;
+}
+
#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */
enum dma_data_direction direction;
enum dma_transfer_direction slave_dirn;
unsigned int sglen;
+ u32 maxburst;
u32 iflags;
data->error = -EINPROGRESS;
if (!chan)
return -ENODEV;
- if (host->caps.has_dma)
- atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN);
-
if (data->flags & MMC_DATA_READ) {
direction = DMA_FROM_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM;
+ maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst);
} else {
direction = DMA_TO_DEVICE;
host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV;
+ maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst);
}
+ atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | ATMCI_DMAEN);
+
sglen = dma_map_sg(chan->device->dev, data->sg,
data->sg_len, direction);
platform_set_drvdata(pdev, host);
+ setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
}
}
- setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
-
dev_info(&pdev->dev,
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
p->des3 = host->sg_dma;
p->des0 = IDMAC_DES0_ER;
+ mci_writel(host, BMOD, SDMMC_IDMAC_SWRESET);
+
/* Mask out interrupts - get Tx & Rx complete only */
mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
SDMMC_IDMAC_INT_TI);
u32 div;
if (slot->clock != host->current_speed) {
- if (host->bus_hz % slot->clock)
+ div = host->bus_hz / slot->clock;
+ if (host->bus_hz % slot->clock && host->bus_hz > slot->clock)
/*
* move the + 1 after the divide to prevent
* over-clocking the card.
*/
- div = ((host->bus_hz / slot->clock) >> 1) + 1;
- else
- div = (host->bus_hz / slot->clock) >> 1;
+ div += 1;
+
+ div = (host->bus_hz != slot->clock) ? DIV_ROUND_UP(div, 2) : 0;
dev_info(&slot->mmc->class_dev,
"Bus speed (slot %d) = %dHz (slot req %dHz, actual %dHZ"
mdelay(20);
if (cmd->data) {
- host->data = NULL;
dw_mci_stop_dma(host);
+ host->data = NULL;
}
}
}
if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- set_bit(EVENT_DATA_COMPLETE, &host->pending_events);
host->dma_ops->complete(host);
}
#endif
#ifdef CONFIG_MMC_DW_IDMAC
ctrl = mci_readl(host, BMOD);
- ctrl |= 0x01; /* Software reset of DMA */
+ /* Software reset of DMA */
+ ctrl |= SDMMC_IDMAC_SWRESET;
mci_writel(host, BMOD, ctrl);
#endif
spin_lock_init(&host->lock);
INIT_LIST_HEAD(&host->queue);
-
- host->dma_ops = host->pdata->dma_ops;
- dw_mci_init_dma(host);
-
/*
* Get the host data width - this assumes that HCON has been set with
* the correct values.
}
/* Reset all blocks */
- if (!mci_wait_reset(&host->dev, host)) {
- ret = -ENODEV;
- goto err_dmaunmap;
- }
+ if (!mci_wait_reset(&host->dev, host))
+ return -ENODEV;
+
+ host->dma_ops = host->pdata->dma_ops;
+ dw_mci_init_dma(host);
/* Clear the interrupts for the host controller */
mci_writel(host, RINTSTS, 0xFFFFFFFF);
if (host->vmmc)
regulator_enable(host->vmmc);
- if (host->dma_ops->init)
- host->dma_ops->init(host);
-
if (!mci_wait_reset(&host->dev, host)) {
ret = -ENODEV;
return ret;
}
+ if (host->dma_ops->init)
+ host->dma_ops->init(host);
+
/* Restore the old value at FIFOTH register */
mci_writel(host, FIFOTH, host->fifoth_val);
int bus_width = 0;
pdata->gpio_wp = of_get_named_gpio(np, "wp-gpios", 0);
- if (!pdata->gpio_wp)
- pdata->gpio_wp = -1;
-
pdata->gpio_cd = of_get_named_gpio(np, "cd-gpios", 0);
- if (!pdata->gpio_cd)
- pdata->gpio_cd = -1;
if (of_get_property(np, "cd-inverted", NULL))
pdata->cd_invert = true;
return -EINVAL;
}
+ if (!plat) {
+ plat = devm_kzalloc(&dev->dev, sizeof(*plat), GFP_KERNEL);
+ if (!plat)
+ return -ENOMEM;
+ }
+
if (np)
mmci_dt_populate_generic_pdata(np, plat);
writel(0, host->base + MMCIMASK1);
writel(0xfff, host->base + MMCICLEAR);
+ if (plat->gpio_cd == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_cd;
+ }
if (gpio_is_valid(plat->gpio_cd)) {
ret = gpio_request(plat->gpio_cd, DRIVER_NAME " (cd)");
if (ret == 0)
if (ret >= 0)
host->gpio_cd_irq = gpio_to_irq(plat->gpio_cd);
}
+ if (plat->gpio_wp == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto err_gpio_wp;
+ }
if (gpio_is_valid(plat->gpio_wp)) {
ret = gpio_request(plat->gpio_wp, DRIVER_NAME " (wp)");
if (ret == 0)
.owner = THIS_MODULE,
#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
- .of_match_table = mxs_mmc_dt_ids,
#endif
+ .of_match_table = mxs_mmc_dt_ids,
},
};
.set_ios = mmc_omap_set_ios,
};
-static int __init mmc_omap_new_slot(struct mmc_omap_host *host, int id)
+static int __devinit mmc_omap_new_slot(struct mmc_omap_host *host, int id)
{
struct mmc_omap_slot *slot = NULL;
struct mmc_host *mmc;
}
host->nr_slots = pdata->nr_slots;
+ host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
+
+ host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
+ if (!host->mmc_omap_wq)
+ goto err_plat_cleanup;
+
for (i = 0; i < pdata->nr_slots; i++) {
ret = mmc_omap_new_slot(host, i);
if (ret < 0) {
while (--i >= 0)
mmc_omap_remove_slot(host->slots[i]);
- goto err_plat_cleanup;
+ goto err_destroy_wq;
}
}
- host->reg_shift = (cpu_is_omap7xx() ? 1 : 2);
-
- host->mmc_omap_wq = alloc_workqueue("mmc_omap", 0, 0);
- if (!host->mmc_omap_wq)
- goto err_plat_cleanup;
-
return 0;
+err_destroy_wq:
+ destroy_workqueue(host->mmc_omap_wq);
err_plat_cleanup:
if (pdata->cleanup)
pdata->cleanup(&pdev->dev);
if (sc->ext_cd_irq &&
request_threaded_irq(sc->ext_cd_irq, NULL,
sdhci_s3c_gpio_card_detect_thread,
- IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
+ IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
dev_name(dev), sc) == 0) {
int status = gpio_get_value(sc->ext_cd_gpio);
if (pdata->ext_cd_gpio_invert)
* Support of SDHCI platform devices for spear soc family
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired by sdhci-pltfm.c
*
module_platform_driver(sdhci_driver);
MODULE_DESCRIPTION("SPEAr Secure Digital Host Controller Interface driver");
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_LICENSE("GPL v2");
}
if (count >= 0xF) {
- pr_warning("%s: Too large timeout 0x%x requested for CMD%d!\n",
- mmc_hostname(host->mmc), count, cmd->opcode);
+ DBG("%s: Too large timeout 0x%x requested for CMD%d!\n",
+ mmc_hostname(host->mmc), count, cmd->opcode);
count = 0xE;
}
}
static void mtdoops_do_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason, const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
struct mtdoops_context *cxt = container_of(dumper,
struct mtdoops_context, dump);
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- char *dst;
-
- if (reason != KMSG_DUMP_OOPS &&
- reason != KMSG_DUMP_PANIC)
- return;
/* Only dump oopses if dump_oops is set */
if (reason == KMSG_DUMP_OOPS && !dump_oops)
return;
- dst = cxt->oops_buf + MTDOOPS_HEADER_SIZE; /* Skip the header */
- l2_cpy = min(l2, record_size - MTDOOPS_HEADER_SIZE);
- l1_cpy = min(l1, record_size - MTDOOPS_HEADER_SIZE - l2_cpy);
-
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
+ kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
+ record_size - MTDOOPS_HEADER_SIZE, NULL);
/* Panics must be written immediately */
if (reason != KMSG_DUMP_OOPS)
return;
}
+ cxt->dump.max_reason = KMSG_DUMP_OOPS;
cxt->dump.dump = mtdoops_do_dump;
err = kmsg_dump_register(&cxt->dump);
if (err) {
if (prev_status >= B43_STAT_STARTED) {
err = b43_wireless_core_start(up_dev);
if (err) {
- b43err(wl, "Fatal: Coult not start device for "
+ b43err(wl, "Fatal: Could not start device for "
"selected %s-GHz band\n",
band_to_string(chan->band));
b43_wireless_core_exit(up_dev);
if (prev_status >= B43legacy_STAT_STARTED) {
err = b43legacy_wireless_core_start(up_dev);
if (err) {
- b43legacyerr(wl, "Fatal: Coult not start device for "
+ b43legacyerr(wl, "Fatal: Could not start device for "
"newly selected %s-PHY mode\n",
phymode_to_string(new_mode));
b43legacy_wireless_core_exit(up_dev);
free_group:
if (!purecfg)
- free(group);
+ kfree(group);
free:
kfree(new_map);
return ret;
dev_dbg(npct->dev, "enable group %s, %u pins\n", g->name, g->npins);
- /* Handle this special glitch on altfunction C */
+ /*
+ * If we're setting altfunc C by setting both AFSLA and AFSLB to 1,
+ * we may pass through an undesired state. In this case we take
+ * some extra care.
+ *
+ * Safe sequence used to switch IOs between GPIO and Alternate-C mode:
+ * - Save SLPM registers (since we have a shadow register in the
+ * nmk_chip we're using that as backup)
+ * - Set SLPM=0 for the IOs you want to switch and others to 1
+ * - Configure the GPIO registers for the IOs that are being switched
+ * - Set IOFORCE=1
+ * - Modify the AFLSA/B registers for the IOs that are being switched
+ * - Set IOFORCE=0
+ * - Restore SLPM registers
+ * - Any spurious wake up event during switch sequence to be ignored
+ * and cleared
+ *
+ * We REALLY need to save ALL slpm registers, because the external
+ * IOFORCE will switch *all* ports to their sleepmode setting to as
+ * to avoid glitches. (Not just one port!)
+ */
glitch = (g->altsetting == NMK_GPIO_ALT_C);
if (glitch) {
* Driver for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* Inspired from:
* - U300 Pinctl drivers
* Driver header file for the ST Microelectronics SPEAr pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Driver for the ST Microelectronics SPEAr1310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr1340 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear1340_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr1340 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear1340_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr300 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear300_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr300 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear300_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr310 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear310_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr310 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, SPEAr310_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr320 pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
module_exit(spear320_pinctrl_exit);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ST Microelectronics SPEAr320 pinctrl driver");
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, spear320_pinctrl_of_match);
* Driver for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* Header file for the ST Microelectronics SPEAr3xx pinmux
*
* Copyright (C) 2012 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
}
static struct of_regulator_match ab8500_regulator_matches[] = {
- { .name = "LDO-AUX1", .driver_data = (void *) AB8500_LDO_AUX1, },
- { .name = "LDO-AUX2", .driver_data = (void *) AB8500_LDO_AUX2, },
- { .name = "LDO-AUX3", .driver_data = (void *) AB8500_LDO_AUX3, },
- { .name = "LDO-INTCORE", .driver_data = (void *) AB8500_LDO_INTCORE, },
- { .name = "LDO-TVOUT", .driver_data = (void *) AB8500_LDO_TVOUT, },
- { .name = "LDO-USB", .driver_data = (void *) AB8500_LDO_USB, },
- { .name = "LDO-AUDIO", .driver_data = (void *) AB8500_LDO_AUDIO, },
- { .name = "LDO-ANAMIC1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
- { .name = "LDO-ANAMIC2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
- { .name = "LDO-DMIC", .driver_data = (void *) AB8500_LDO_DMIC, },
- { .name = "LDO-ANA", .driver_data = (void *) AB8500_LDO_ANA, },
+ { .name = "ab8500_ldo_aux1", .driver_data = (void *) AB8500_LDO_AUX1, },
+ { .name = "ab8500_ldo_aux2", .driver_data = (void *) AB8500_LDO_AUX2, },
+ { .name = "ab8500_ldo_aux3", .driver_data = (void *) AB8500_LDO_AUX3, },
+ { .name = "ab8500_ldo_intcore", .driver_data = (void *) AB8500_LDO_INTCORE, },
+ { .name = "ab8500_ldo_tvout", .driver_data = (void *) AB8500_LDO_TVOUT, },
+ { .name = "ab8500_ldo_usb", .driver_data = (void *) AB8500_LDO_USB, },
+ { .name = "ab8500_ldo_audio", .driver_data = (void *) AB8500_LDO_AUDIO, },
+ { .name = "ab8500_ldo_anamic1", .driver_data = (void *) AB8500_LDO_ANAMIC1, },
+ { .name = "ab8500_ldo_amamic2", .driver_data = (void *) AB8500_LDO_ANAMIC2, },
+ { .name = "ab8500_ldo_dmic", .driver_data = (void *) AB8500_LDO_DMIC, },
+ { .name = "ab8500_ldo_ana", .driver_data = (void *) AB8500_LDO_ANA, },
};
static __devinit int
}
static struct of_regulator_match db8500_regulator_matches[] = {
- { .name = "db8500-vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
- { .name = "db8500-varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
- { .name = "db8500-vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
- { .name = "db8500-vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
- { .name = "db8500-vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
- { .name = "db8500-vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
- { .name = "db8500-vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
- { .name = "db8500-vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
- { .name = "db8500-sva-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
- { .name = "db8500-sva-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
- { .name = "db8500-sva-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
- { .name = "db8500-sia-mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
- { .name = "db8500-sia-mmdsp-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
- { .name = "db8500-sia-pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
- { .name = "db8500-sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
- { .name = "db8500-b2r2-mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
- { .name = "db8500-esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
- { .name = "db8500-esram12-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
- { .name = "db8500-esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
- { .name = "db8500-esram34-ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
+ { .name = "db8500_vape", .driver_data = (void *) DB8500_REGULATOR_VAPE, },
+ { .name = "db8500_varm", .driver_data = (void *) DB8500_REGULATOR_VARM, },
+ { .name = "db8500_vmodem", .driver_data = (void *) DB8500_REGULATOR_VMODEM, },
+ { .name = "db8500_vpll", .driver_data = (void *) DB8500_REGULATOR_VPLL, },
+ { .name = "db8500_vsmps1", .driver_data = (void *) DB8500_REGULATOR_VSMPS1, },
+ { .name = "db8500_vsmps2", .driver_data = (void *) DB8500_REGULATOR_VSMPS2, },
+ { .name = "db8500_vsmps3", .driver_data = (void *) DB8500_REGULATOR_VSMPS3, },
+ { .name = "db8500_vrf1", .driver_data = (void *) DB8500_REGULATOR_VRF1, },
+ { .name = "db8500_sva_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSP, },
+ { .name = "db8500_sva_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAMMDSPRET, },
+ { .name = "db8500_sva_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SVAPIPE, },
+ { .name = "db8500_sia_mmdsp", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSP, },
+ { .name = "db8500_sia_mmdsp_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAMMDSPRET, },
+ { .name = "db8500_sia_pipe", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SIAPIPE, },
+ { .name = "db8500_sga", .driver_data = (void *) DB8500_REGULATOR_SWITCH_SGA, },
+ { .name = "db8500_b2r2_mcde", .driver_data = (void *) DB8500_REGULATOR_SWITCH_B2R2_MCDE, },
+ { .name = "db8500_esram12", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12, },
+ { .name = "db8500_esram12_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM12RET, },
+ { .name = "db8500_esram34", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34, },
+ { .name = "db8500_esram34_ret", .driver_data = (void *) DB8500_REGULATOR_SWITCH_ESRAM34RET, },
};
static __devinit int
desc = reg_voltage_map[reg_id];
- if (old_sel < new_sel)
+ if ((old_sel < new_sel) && s5m8767->ramp_delay)
return DIV_ROUND_UP(desc->step * (new_sel - old_sel),
s5m8767->ramp_delay * 1000);
return 0;
ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
if (ret) {
- dev_err(pdev->dev.parent, "dma_set_coherent_mask: %d\n", ret);
+ dev_err(&pdev->dev, "dma_set_coherent_mask: %d\n", ret);
return ret;
}
}
if (offset + filesz > len) {
- dev_err(dev, "truncated fw: need 0x%x avail 0x%x\n",
+ dev_err(dev, "truncated fw: need 0x%x avail 0x%zx\n",
offset + filesz, len);
ret = -EINVAL;
break;
unmapped = iommu_unmap(rproc->domain, entry->da, entry->len);
if (unmapped != entry->len) {
/* nothing much to do besides complaining */
- dev_err(dev, "failed to unmap %u/%u\n", entry->len,
+ dev_err(dev, "failed to unmap %u/%zu\n", entry->len,
unmapped);
}
ehdr = (struct elf32_hdr *)fw->data;
- dev_info(dev, "Booting fw image %s, size %d\n", name, fw->size);
+ dev_info(dev, "Booting fw image %s, size %zd\n", name, fw->size);
/*
* if enabling an IOMMU isn't relevant for this rproc, this is
/* look for the resource table */
table = rproc_find_rsc_table(rproc, fw->data, fw->size, &tablesz);
- if (!table)
+ if (!table) {
+ ret = -EINVAL;
goto clean_up;
+ }
/* handle fw resources which are required to boot rproc */
ret = rproc_handle_boot_rsc(rproc, table, tablesz);
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
- cs = devm_kzalloc(&spi->dev , sizeof *cs, GFP_KERNEL);
+ cs = kzalloc(sizeof *cs, GFP_KERNEL);
if (!cs)
return -ENOMEM;
cs->base = mcspi->base + spi->chip_select * 0x14;
cs = spi->controller_state;
list_del(&cs->node);
+ kfree(cs);
}
if (spi->chip_select < spi->master->num_chipselect) {
#include <linux/pci.h>
#include <linux/usb.h>
#include <linux/errno.h>
+#include <linux/kconfig.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fcntl.h>
}
EXPORT_SYMBOL_GPL(comedi_pci_driver_unregister);
+#if IS_ENABLED(CONFIG_USB)
+
static int comedi_old_usb_auto_config(struct usb_interface *intf,
struct comedi_driver *driver)
{
comedi_driver_unregister(comedi_driver);
}
EXPORT_SYMBOL_GPL(comedi_usb_driver_unregister);
+
+#endif
void netlink_exit(struct sock *sock)
{
- sock_release(sock->sk_socket);
+ netlink_kernel_release(sock);
}
int netlink_send(struct sock *sock, int group, u16 type, void *msg, int len)
* info->driver_module:
Set to THIS_MODULE. Used to ensure correct ownership
of various resources allocate by the core.
- * info->num_interrupt_lines:
- Number of event triggering hardware lines the device has.
* info->event_attrs:
Attributes used to enable / disable hardware events.
* info->attrs:
config AD7298
tristate "Analog Devices AD7298 ADC driver"
depends on SPI
+ select IIO_KFIFO_BUF if IIO_BUFFER
help
Say yes here to build support for Analog Devices AD7298
8 Channel ADC with temperature sensor.
.indexed = 1, \
.channel = num, \
.address = num, \
- .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT, \
+ .info_mask = IIO_CHAN_INFO_RAW_SEPARATE_BIT | \
+ IIO_CHAN_INFO_SCALE_SHARED_BIT, \
.scan_index = num, \
.scan_type = IIO_ST('s', 16, 16, 0), \
}
*/
ret = omap_gem_get_paddr(fbdev->bo, &paddr, true);
if (ret) {
- dev_err(dev->dev, "could not map (paddr)!\n");
+ dev_err(dev->dev,
+ "could not map (paddr)! Skipping framebuffer alloc\n");
ret = -ENOMEM;
goto fail;
}
fbi = helper->fbdev;
- unregister_framebuffer(fbi);
- framebuffer_release(fbi);
+ /* only cleanup framebuffer if it is present */
+ if (fbi) {
+ unregister_framebuffer(fbi);
+ framebuffer_release(fbi);
+ }
drm_fb_helper_fini(helper);
/* - */
{USB_DEVICE(0x20F4, 0x646B)},
{USB_DEVICE(0x083A, 0xC512)},
+ {USB_DEVICE(0x25D4, 0x4CA1)},
+ {USB_DEVICE(0x25D4, 0x4CAB)},
/* RTL8191SU */
/* Realtek */
/**
* serial8250_register_8250_port - register a serial port
- * @port: serial port template
+ * @up: serial port template
*
* Configure the serial port specified by the request. If the
* port exists and is in use, it is hung up and unregistered
struct uart_amba_port {
struct uart_port port;
struct clk *clk;
+ /* Two optional pin states - default & sleep */
+ struct pinctrl *pinctrl;
+ struct pinctrl_state *pins_default;
+ struct pinctrl_state *pins_sleep;
const struct vendor_data *vendor;
unsigned int dmacr; /* dma control reg */
unsigned int im; /* interrupt mask */
unsigned int cr;
int retval;
+ /* Optionaly enable pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (retval)
+ dev_err(port->dev,
+ "could not set default pins\n");
+ }
+
retval = clk_prepare(uap->clk);
if (retval)
goto out;
{
struct uart_amba_port *uap = (struct uart_amba_port *)port;
unsigned int cr;
+ int retval;
/*
* disable all interrupts
*/
clk_disable(uap->clk);
clk_unprepare(uap->clk);
+ /* Optionally let pins go into sleep states */
+ if (!IS_ERR(uap->pins_sleep)) {
+ retval = pinctrl_select_state(uap->pinctrl, uap->pins_sleep);
+ if (retval)
+ dev_err(port->dev,
+ "could not set pins to sleep state\n");
+ }
+
if (uap->port.dev->platform_data) {
struct amba_pl011_data *plat;
if (!uap)
return -ENODEV;
+ /* Allow pins to be muxed in and configured */
+ if (!IS_ERR(uap->pins_default)) {
+ ret = pinctrl_select_state(uap->pinctrl, uap->pins_default);
+ if (ret)
+ dev_err(uap->port.dev,
+ "could not set default pins\n");
+ }
+
ret = clk_prepare(uap->clk);
if (ret)
return ret;
{
struct uart_amba_port *uap;
struct vendor_data *vendor = id->data;
- struct pinctrl *pinctrl;
void __iomem *base;
int i, ret;
goto free;
}
- pinctrl = devm_pinctrl_get_select_default(&dev->dev);
- if (IS_ERR(pinctrl)) {
- ret = PTR_ERR(pinctrl);
+ uap->pinctrl = devm_pinctrl_get(&dev->dev);
+ if (IS_ERR(uap->pinctrl)) {
+ ret = PTR_ERR(uap->pinctrl);
goto unmap;
}
+ uap->pins_default = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_DEFAULT);
+ if (IS_ERR(uap->pins_default))
+ dev_err(&dev->dev, "could not get default pinstate\n");
+
+ uap->pins_sleep = pinctrl_lookup_state(uap->pinctrl,
+ PINCTRL_STATE_SLEEP);
+ if (IS_ERR(uap->pins_sleep))
+ dev_dbg(&dev->dev, "could not get sleep pinstate\n");
uap->clk = clk_get(&dev->dev, NULL);
if (IS_ERR(uap->clk)) {
spin_unlock_irqrestore(&up->port.lock, flags);
}
-#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || (CONFIG_CONSOLE_POLL)
+#if defined(CONFIG_SERIAL_TXX9_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
/*
* Wait for transmitter & holding register to empty
*/
* Watchdog driver for ARM SP805 watchdog module
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2 or later. This program is licensed "as is" without any
module_amba_driver(sp805_wdt_driver);
-MODULE_AUTHOR("Viresh Kumar <viresh.kumar@st.com>");
+MODULE_AUTHOR("Viresh Kumar <viresh.linux@gmail.com>");
MODULE_DESCRIPTION("ARM SP805 Watchdog Driver");
MODULE_LICENSE("GPL");
static int add_all_parents(struct btrfs_root *root, struct btrfs_path *path,
struct ulist *parents, int level,
- struct btrfs_key *key, u64 time_seq,
+ struct btrfs_key *key_for_search, u64 time_seq,
u64 wanted_disk_byte,
const u64 *extent_item_pos)
{
- int ret;
- int slot = path->slots[level];
- struct extent_buffer *eb = path->nodes[level];
+ int ret = 0;
+ int slot;
+ struct extent_buffer *eb;
+ struct btrfs_key key;
struct btrfs_file_extent_item *fi;
struct extent_inode_elem *eie = NULL;
u64 disk_byte;
- u64 wanted_objectid = key->objectid;
-add_parent:
- if (level == 0 && extent_item_pos) {
- fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
- ret = check_extent_in_eb(key, eb, fi, *extent_item_pos, &eie);
+ if (level != 0) {
+ eb = path->nodes[level];
+ ret = ulist_add(parents, eb->start, 0, GFP_NOFS);
if (ret < 0)
return ret;
- }
- ret = ulist_add(parents, eb->start, (unsigned long)eie, GFP_NOFS);
- if (ret < 0)
- return ret;
-
- if (level != 0)
return 0;
+ }
/*
- * if the current leaf is full with EXTENT_DATA items, we must
- * check the next one if that holds a reference as well.
- * ref->count cannot be used to skip this check.
- * repeat this until we don't find any additional EXTENT_DATA items.
+ * We normally enter this function with the path already pointing to
+ * the first item to check. But sometimes, we may enter it with
+ * slot==nritems. In that case, go to the next leaf before we continue.
*/
- while (1) {
- eie = NULL;
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0]))
ret = btrfs_next_old_leaf(root, path, time_seq);
- if (ret < 0)
- return ret;
- if (ret)
- return 0;
+ while (!ret) {
eb = path->nodes[0];
- for (slot = 0; slot < btrfs_header_nritems(eb); ++slot) {
- btrfs_item_key_to_cpu(eb, key, slot);
- if (key->objectid != wanted_objectid ||
- key->type != BTRFS_EXTENT_DATA_KEY)
- return 0;
- fi = btrfs_item_ptr(eb, slot,
- struct btrfs_file_extent_item);
- disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
- if (disk_byte == wanted_disk_byte)
- goto add_parent;
+ slot = path->slots[0];
+
+ btrfs_item_key_to_cpu(eb, &key, slot);
+
+ if (key.objectid != key_for_search->objectid ||
+ key.type != BTRFS_EXTENT_DATA_KEY)
+ break;
+
+ fi = btrfs_item_ptr(eb, slot, struct btrfs_file_extent_item);
+ disk_byte = btrfs_file_extent_disk_bytenr(eb, fi);
+
+ if (disk_byte == wanted_disk_byte) {
+ eie = NULL;
+ if (extent_item_pos) {
+ ret = check_extent_in_eb(&key, eb, fi,
+ *extent_item_pos,
+ &eie);
+ if (ret < 0)
+ break;
+ }
+ if (!ret) {
+ ret = ulist_add(parents, eb->start,
+ (unsigned long)eie, GFP_NOFS);
+ if (ret < 0)
+ break;
+ if (!extent_item_pos) {
+ ret = btrfs_next_old_leaf(root, path,
+ time_seq);
+ continue;
+ }
+ }
}
+ ret = btrfs_next_old_item(root, path, time_seq);
}
- return 0;
+ if (ret > 0)
+ ret = 0;
+ return ret;
}
/*
struct btrfs_path *path;
struct btrfs_root *root;
struct btrfs_key root_key;
- struct btrfs_key key = {0};
struct extent_buffer *eb;
int ret = 0;
int root_level;
goto out;
}
- if (level == 0)
- btrfs_item_key_to_cpu(eb, &key, path->slots[0]);
-
- ret = add_all_parents(root, path, parents, level, &key, time_seq,
- ref->wanted_disk_byte, extent_item_pos);
+ ret = add_all_parents(root, path, parents, level, &ref->key_for_search,
+ time_seq, ref->wanted_disk_byte,
+ extent_item_pos);
out:
btrfs_free_path(path);
return ret;
int btrfs_next_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_next_old_leaf(struct btrfs_root *root, struct btrfs_path *path,
u64 time_seq);
-static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+static inline int btrfs_next_old_item(struct btrfs_root *root,
+ struct btrfs_path *p, u64 time_seq)
{
++p->slots[0];
if (p->slots[0] >= btrfs_header_nritems(p->nodes[0]))
- return btrfs_next_leaf(root, p);
+ return btrfs_next_old_leaf(root, p, time_seq);
return 0;
}
+static inline int btrfs_next_item(struct btrfs_root *root, struct btrfs_path *p)
+{
+ return btrfs_next_old_item(root, p, 0);
+}
int btrfs_prev_leaf(struct btrfs_root *root, struct btrfs_path *path);
int btrfs_leaf_free_space(struct btrfs_root *root, struct extent_buffer *leaf);
int __must_check btrfs_drop_snapshot(struct btrfs_root *root,
mutex_unlock(&head->mutex);
btrfs_put_delayed_ref(ref);
+ spin_lock(&delayed_refs->lock);
continue;
}
async_cow->start, async_cow->end, async_cow,
&num_added);
if (num_added == 0) {
- iput(async_cow->inode);
+ btrfs_add_delayed_iput(async_cow->inode);
async_cow->inode = NULL;
}
}
struct async_cow *async_cow;
async_cow = container_of(work, struct async_cow, work);
if (async_cow->inode)
- iput(async_cow->inode);
+ btrfs_add_delayed_iput(async_cow->inode);
kfree(async_cow);
}
(CONGESTION_ON_THRESH(congestion_kb) - \
(CONGESTION_ON_THRESH(congestion_kb) >> 2))
-
+static inline struct ceph_snap_context *page_snap_context(struct page *page)
+{
+ if (PagePrivate(page))
+ return (void *)page->private;
+ return NULL;
+}
/*
* Dirty a page. Optimistically adjust accounting, on the assumption
{
struct inode *inode;
struct ceph_inode_info *ci;
- struct ceph_snap_context *snapc = (void *)page->private;
+ struct ceph_snap_context *snapc = page_snap_context(page);
BUG_ON(!PageLocked(page));
- BUG_ON(!page->private);
BUG_ON(!PagePrivate(page));
BUG_ON(!page->mapping);
struct inode *inode = page->mapping ? page->mapping->host : NULL;
dout("%p releasepage %p idx %lu\n", inode, page, page->index);
WARN_ON(PageDirty(page));
- WARN_ON(page->private);
WARN_ON(PagePrivate(page));
return 0;
}
osdc = &fsc->client->osdc;
/* verify this is a writeable snap context */
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc == NULL) {
dout("writepage %p page %p not dirty?\n", inode, page);
goto out;
oldest = get_oldest_context(inode, &snap_size);
if (snapc->seq > oldest->seq) {
dout("writepage %p page %p snapc %p not writeable - noop\n",
- inode, page, (void *)page->private);
+ inode, page, snapc);
/* we should only noop if called by kswapd */
WARN_ON((current->flags & PF_MEMALLOC) == 0);
ceph_put_snap_context(oldest);
clear_bdi_congested(&fsc->backing_dev_info,
BLK_RW_ASYNC);
- ceph_put_snap_context((void *)page->private);
+ ceph_put_snap_context(page_snap_context(page));
page->private = 0;
ClearPagePrivate(page);
dout("unlocking %d %p\n", i, page);
}
/* only if matching snap context */
- pgsnapc = (void *)page->private;
+ pgsnapc = page_snap_context(page);
if (pgsnapc->seq > snapc->seq) {
dout("page snapc %p %lld > oldest %p %lld\n",
pgsnapc, pgsnapc->seq, snapc, snapc->seq);
BUG_ON(!ci->i_snap_realm);
down_read(&mdsc->snap_rwsem);
BUG_ON(!ci->i_snap_realm->cached_context);
- snapc = (void *)page->private;
+ snapc = page_snap_context(page);
if (snapc && snapc != ci->i_head_snapc) {
/*
* this page is already dirty in another (older) snap
/* Notify parent that we're no longer interested in the old VM */
tsk = current;
old_mm = current->mm;
- sync_mm_rss(old_mm);
mm_release(tsk, old_mm);
if (old_mm) {
+ sync_mm_rss(old_mm);
/*
* Make sure that if there is a core dump in progress
* for the old mm, we get out and die instead of going
struct hfsplus_sb_info *sbi = HFSPLUS_SB(inode->i_sb);
struct hfsplus_vh *vh = sbi->s_vhdr;
struct hfsplus_vh *bvh = sbi->s_backup_vhdr;
+ u32 cnid = (unsigned long)dentry->d_fsdata;
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
vh->finder_info[0] = bvh->finder_info[0] =
cpu_to_be32(parent_ino(dentry));
- /* Bootloader */
- vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(inode->i_ino);
+ /*
+ * Bootloader. Just using the inode here breaks in the case of
+ * hard links - the firmware wants the ID of the hard link file,
+ * but the inode points at the indirect inode
+ */
+ vh->finder_info[1] = bvh->finder_info[1] = cpu_to_be32(cnid);
/* Per spec, the OS X system folder - same as finder_info[0] here */
vh->finder_info[5] = bvh->finder_info[5] =
DECLARE_COMPLETION_ONSTACK(wait);
struct bio *bio;
int ret = 0;
- unsigned int io_size;
+ u64 io_size;
loff_t start;
int offset;
static void nfs4_shutdown_session(struct nfs_client *clp)
{
if (nfs4_has_session(clp)) {
- nfs4_deviceid_purge_client(clp);
nfs4_destroy_session(clp->cl_session);
nfs4_destroy_clientid(clp);
}
dreq->error = -EIO;
spin_unlock(cinfo.lock);
}
+ nfs_release_request(req);
}
nfs_pageio_complete(&desc);
static const struct cred *id_resolver_cache;
static struct key_type key_type_id_resolver_legacy;
+struct idmap {
+ struct rpc_pipe *idmap_pipe;
+ struct key_construction *idmap_key_cons;
+ struct mutex idmap_mutex;
+};
/**
* nfs_fattr_init_names - initialise the nfs_fattr owner_name/group_name fields
name, namelen, type, data,
data_size, NULL);
if (ret < 0) {
+ mutex_lock(&idmap->idmap_mutex);
ret = nfs_idmap_request_key(&key_type_id_resolver_legacy,
name, namelen, type, data,
data_size, idmap);
+ mutex_unlock(&idmap->idmap_mutex);
}
return ret;
}
/* idmap classic begins here */
module_param(nfs_idmap_cache_timeout, int, 0644);
-struct idmap {
- struct rpc_pipe *idmap_pipe;
- struct key_construction *idmap_key_cons;
-};
-
enum {
Opt_find_uid, Opt_find_gid, Opt_find_user, Opt_find_group, Opt_find_err
};
return error;
}
idmap->idmap_pipe = pipe;
+ mutex_init(&idmap->idmap_mutex);
clp->cl_idmap = idmap;
return 0;
nfsi->delegation_state = 0;
init_rwsem(&nfsi->rwsem);
nfsi->layout = NULL;
- atomic_set(&nfsi->commit_info.rpcs_out, 0);
#endif
}
INIT_LIST_HEAD(&nfsi->commit_info.list);
nfsi->npages = 0;
nfsi->commit_info.ncommit = 0;
+ atomic_set(&nfsi->commit_info.rpcs_out, 0);
atomic_set(&nfsi->silly_count, 1);
INIT_HLIST_HEAD(&nfsi->silly_list);
init_waitqueue_head(&nfsi->waitqueue);
spin_lock(&pnfs_spinlock);
local = find_pnfs_driver_locked(id);
+ if (local != NULL && !try_module_get(local->owner)) {
+ dprintk("%s: Could not grab reference on module\n", __func__);
+ local = NULL;
+ }
spin_unlock(&pnfs_spinlock);
return local;
}
if (nfss->pnfs_curr_ld) {
if (nfss->pnfs_curr_ld->clear_layoutdriver)
nfss->pnfs_curr_ld->clear_layoutdriver(nfss);
+ /* Decrement the MDS count. Purge the deviceid cache if zero */
+ if (atomic_dec_and_test(&nfss->nfs_client->cl_mds_count))
+ nfs4_deviceid_purge_client(nfss->nfs_client);
module_put(nfss->pnfs_curr_ld->owner);
}
nfss->pnfs_curr_ld = NULL;
goto out_no_driver;
}
}
- if (!try_module_get(ld_type->owner)) {
- dprintk("%s: Could not grab reference on module\n", __func__);
- goto out_no_driver;
- }
server->pnfs_curr_ld = ld_type;
if (ld_type->set_layoutdriver
&& ld_type->set_layoutdriver(server, mntfh)) {
module_put(ld_type->owner);
goto out_no_driver;
}
+ /* Bump the MDS count */
+ atomic_inc(&server->nfs_client->cl_mds_count);
dprintk("%s: pNFS module for %u set\n", __func__, id);
return;
while (!list_empty(head)) {
ii = list_first_entry(head, struct nilfs_inode_info, i_dirty);
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
if (!test_bit(NILFS_I_UPDATED, &ii->i_state))
continue;
list_del_init(&ii->i_dirty);
+ truncate_inode_pages(&ii->vfs_inode.i_data, 0);
+ nilfs_btnode_cache_clear(&ii->i_btnode_cache);
iput(&ii->vfs_inode);
}
}
return rc;
}
-int pstore_fill_super(struct super_block *sb, void *data, int silent)
+static int pstore_fill_super(struct super_block *sb, void *data, int silent)
{
struct inode *inode;
* as we can from the end of the buffer.
*/
static void pstore_dump(struct kmsg_dumper *dumper,
- enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2)
+ enum kmsg_dump_reason reason)
{
- unsigned long s1_start, s2_start;
- unsigned long l1_cpy, l2_cpy;
- unsigned long size, total = 0;
- char *dst;
+ unsigned long total = 0;
const char *why;
u64 id;
- int hsize, ret;
unsigned int part = 1;
unsigned long flags = 0;
int is_locked = 0;
+ int ret;
why = get_reason_str(reason);
spin_lock_irqsave(&psinfo->buf_lock, flags);
oopscount++;
while (total < kmsg_bytes) {
+ char *dst;
+ unsigned long size;
+ int hsize;
+ size_t len;
+
dst = psinfo->buf;
hsize = sprintf(dst, "%s#%d Part%d\n", why, oopscount, part);
size = psinfo->bufsize - hsize;
dst += hsize;
- l2_cpy = min(l2, size);
- l1_cpy = min(l1, size - l2_cpy);
-
- if (l1_cpy + l2_cpy == 0)
+ if (!kmsg_dump_get_buffer(dumper, true, dst, size, &len))
break;
- s2_start = l2 - l2_cpy;
- s1_start = l1 - l1_cpy;
-
- memcpy(dst, s1 + s1_start, l1_cpy);
- memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy);
-
ret = psinfo->write(PSTORE_TYPE_DMESG, reason, &id, part,
- hsize + l1_cpy + l2_cpy, psinfo);
+ hsize + len, psinfo);
if (ret == 0 && reason == KMSG_DUMP_OOPS && pstore_is_mounted())
pstore_new_entry = 1;
- l1 -= l1_cpy;
- l2 -= l2_cpy;
- total += l1_cpy + l2_cpy;
+
+ total += hsize + len;
part++;
}
if (in_nmi()) {
time->tv_sec = 0;
time->tv_nsec = 0;
+ /* Update old/shadowed buffer. */
+ persistent_ram_save_old(prz);
size = persistent_ram_old_size(prz);
*buf = kmalloc(size, GFP_KERNEL);
if (*buf == NULL)
return -EINVAL;
persistent_ram_free_old(cxt->przs[id]);
+ persistent_ram_zap(cxt->przs[id]);
return 0;
}
persistent_ram_update_ecc(prz, start, count);
}
-static void __init
-persistent_ram_save_old(struct persistent_ram_zone *prz)
+void persistent_ram_save_old(struct persistent_ram_zone *prz)
{
struct persistent_ram_buffer *buffer = prz->buffer;
size_t size = buffer_size(prz);
size_t start = buffer_start(prz);
- char *dest;
- persistent_ram_ecc_old(prz);
+ if (!size)
+ return;
- dest = kmalloc(size, GFP_KERNEL);
- if (dest == NULL) {
+ if (!prz->old_log) {
+ persistent_ram_ecc_old(prz);
+ prz->old_log = kmalloc(size, GFP_KERNEL);
+ }
+ if (!prz->old_log) {
pr_err("persistent_ram: failed to allocate buffer\n");
return;
}
- prz->old_log = dest;
prz->old_log_size = size;
memcpy(prz->old_log, &buffer->data[start], size - start);
memcpy(prz->old_log + size - start, &buffer->data[0], start);
prz->old_log_size = 0;
}
+void persistent_ram_zap(struct persistent_ram_zone *prz)
+{
+ atomic_set(&prz->buffer->start, 0);
+ atomic_set(&prz->buffer->size, 0);
+ persistent_ram_update_header_ecc(prz);
+}
+
static void *persistent_ram_vmap(phys_addr_t start, size_t size)
{
struct page **pages;
" size %zu, start %zu\n",
buffer_size(prz), buffer_start(prz));
persistent_ram_save_old(prz);
+ return 0;
}
} else {
pr_info("persistent_ram: no valid data in buffer"
}
prz->buffer->sig = PERSISTENT_RAM_SIG;
- atomic_set(&prz->buffer->start, 0);
- atomic_set(&prz->buffer->size, 0);
+ persistent_ram_zap(prz);
return 0;
}
goto err;
persistent_ram_post_init(prz, ecc);
- persistent_ram_update_header_ecc(prz);
return prz;
err:
goto restart;
}
+ xfs_btree_del_cursor(cnt_cur, XFS_BTREE_NOERROR);
trace_xfs_alloc_size_neither(args);
args->agbno = NULLAGBLOCK;
return 0;
DECLARE_COMPLETION_ONSTACK(done);
args->done = &done;
- INIT_WORK(&args->work, xfs_alloc_vextent_worker);
+ INIT_WORK_ONSTACK(&args->work, xfs_alloc_vextent_worker);
queue_work(xfs_alloc_wq, &args->work);
wait_for_completion(&done);
return args->result;
imap_valid = 0;
}
} else {
- if (PageUptodate(page)) {
+ if (PageUptodate(page))
ASSERT(buffer_mapped(bh));
- imap_valid = 0;
- }
+ /*
+ * This buffer is not uptodate and will not be
+ * written to disk. Ensure that we will put any
+ * subsequent writeable buffers into a new
+ * ioend.
+ */
+ imap_valid = 0;
continue;
}
bp->b_length = numblks;
bp->b_io_length = numblks;
bp->b_flags = flags;
-
- /*
- * We do not set the block number here in the buffer because we have not
- * finished initialising the buffer. We insert the buffer into the cache
- * in this state, so this ensures that we are unable to do IO on a
- * buffer that hasn't been fully initialised.
- */
- bp->b_bn = XFS_BUF_DADDR_NULL;
+ bp->b_bn = blkno;
atomic_set(&bp->b_pin_count, 0);
init_waitqueue_head(&bp->b_waiters);
if (bp != new_bp)
xfs_buf_free(new_bp);
- /*
- * Now we have a workable buffer, fill in the block number so
- * that we can do IO on it.
- */
- bp->b_bn = blkno;
bp->b_io_length = bp->b_length;
found:
int error, i;
xfs_buf_t *bp;
- bp = xfs_buf_alloc(target, 0, numblks, 0);
+ bp = xfs_buf_alloc(target, XFS_BUF_DADDR_NULL, numblks, 0);
if (unlikely(bp == NULL))
goto fail;
goto out_unlock;
}
+ /*
+ * Stale inode items should force out the iclog.
+ */
+ if (ip->i_flags & XFS_ISTALE) {
+ rval = XFS_ITEM_PINNED;
+ goto out_unlock;
+ }
+
/*
* Someone else is already flushing the inode. Nothing we can do
* here but wait for the flush to finish and remove the item from
goto out_unlock;
}
- /*
- * Stale inode items should force out the iclog.
- */
- if (ip->i_flags & XFS_ISTALE) {
- xfs_ifunlock(ip);
- xfs_iunlock(ip, XFS_ILOCK_SHARED);
- return XFS_ITEM_PINNED;
- }
-
ASSERT(iip->ili_fields != 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
ASSERT(iip->ili_logged == 0 || XFS_FORCED_SHUTDOWN(ip->i_mount));
kmem_zone_t *xfs_log_ticket_zone;
/* Local miscellaneous function prototypes */
-STATIC int xlog_commit_record(struct log *log, struct xlog_ticket *ticket,
- xlog_in_core_t **, xfs_lsn_t *);
+STATIC int
+xlog_commit_record(
+ struct xlog *log,
+ struct xlog_ticket *ticket,
+ struct xlog_in_core **iclog,
+ xfs_lsn_t *commitlsnp);
+
STATIC xlog_t * xlog_alloc_log(xfs_mount_t *mp,
xfs_buftarg_t *log_target,
xfs_daddr_t blk_offset,
int num_bblks);
-STATIC int xlog_space_left(struct log *log, atomic64_t *head);
+STATIC int
+xlog_space_left(
+ struct xlog *log,
+ atomic64_t *head);
STATIC int xlog_sync(xlog_t *log, xlog_in_core_t *iclog);
STATIC void xlog_dealloc_log(xlog_t *log);
int eventual_size);
STATIC void xlog_state_want_sync(xlog_t *log, xlog_in_core_t *iclog);
-STATIC void xlog_grant_push_ail(struct log *log,
- int need_bytes);
+STATIC void
+xlog_grant_push_ail(
+ struct xlog *log,
+ int need_bytes);
STATIC void xlog_regrant_reserve_log_space(xlog_t *log,
xlog_ticket_t *ticket);
STATIC void xlog_ungrant_log_space(xlog_t *log,
#if defined(DEBUG)
STATIC void xlog_verify_dest_ptr(xlog_t *log, char *ptr);
-STATIC void xlog_verify_grant_tail(struct log *log);
+STATIC void
+xlog_verify_grant_tail(
+ struct xlog *log);
STATIC void xlog_verify_iclog(xlog_t *log, xlog_in_core_t *iclog,
int count, boolean_t syncing);
STATIC void xlog_verify_tail_lsn(xlog_t *log, xlog_in_core_t *iclog,
static void
xlog_grant_sub_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static void
xlog_grant_add_space(
- struct log *log,
- atomic64_t *head,
- int bytes)
+ struct xlog *log,
+ atomic64_t *head,
+ int bytes)
{
int64_t head_val = atomic64_read(head);
int64_t new, old;
static inline int
xlog_ticket_reservation(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic)
{
STATIC bool
xlog_grant_head_wake(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
int *free_bytes)
{
STATIC int
xlog_grant_head_wait(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int need_bytes)
*/
STATIC int
xlog_grant_head_check(
- struct log *log,
+ struct xlog *log,
struct xlog_grant_head *head,
struct xlog_ticket *tic,
int *need_bytes)
struct xfs_mount *mp,
struct xlog_ticket *tic)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int need_bytes;
int error = 0;
bool permanent,
uint t_type)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_ticket *tic;
int need_bytes;
int error = 0;
struct xlog_in_core **iclog,
uint flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
xfs_lsn_t lsn = 0;
if (XLOG_FORCED_SHUTDOWN(log) ||
void
xfs_log_unmount(xfs_mount_t *mp)
{
+ cancel_delayed_work_sync(&mp->m_sync_work);
xfs_trans_ail_destroy(mp);
xlog_dealloc_log(mp->m_log);
}
xfs_log_space_wake(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int free_bytes;
if (XLOG_FORCED_SHUTDOWN(log))
xlog_assign_tail_lsn_locked(
struct xfs_mount *mp)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xfs_log_item *lip;
xfs_lsn_t tail_lsn;
*/
STATIC int
xlog_space_left(
- struct log *log,
+ struct xlog *log,
atomic64_t *head)
{
int free_bytes;
*/
STATIC int
xlog_commit_record(
- struct log *log,
+ struct xlog *log,
struct xlog_ticket *ticket,
struct xlog_in_core **iclog,
xfs_lsn_t *commitlsnp)
*/
STATIC void
xlog_grant_push_ail(
- struct log *log,
+ struct xlog *log,
int need_bytes)
{
xfs_lsn_t threshold_lsn = 0;
static xlog_op_header_t *
xlog_write_setup_ophdr(
- struct log *log,
+ struct xlog *log,
struct xlog_op_header *ophdr,
struct xlog_ticket *ticket,
uint flags)
static int
xlog_write_copy_finish(
- struct log *log,
+ struct xlog *log,
struct xlog_in_core *iclog,
uint flags,
int *record_cnt,
*/
int
xlog_write(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket,
xfs_lsn_t *start_lsn,
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
xfs_lsn_t lsn;
uint flags,
int *log_flushed)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
struct xlog_in_core *iclog;
int already_slept = 0;
*/
xlog_ticket_t *
xlog_ticket_alloc(
- struct log *log,
+ struct xlog *log,
int unit_bytes,
int cnt,
char client,
*/
void
xlog_verify_dest_ptr(
- struct log *log,
+ struct xlog *log,
char *ptr)
{
int i;
*/
STATIC void
xlog_verify_grant_tail(
- struct log *log)
+ struct xlog *log)
{
int tail_cycle, tail_blocks;
int cycle, space;
*/
static struct xlog_ticket *
xlog_cil_ticket_alloc(
- struct log *log)
+ struct xlog *log)
{
struct xlog_ticket *tic;
*/
void
xlog_cil_init_post_recovery(
- struct log *log)
+ struct xlog *log)
{
log->l_cilp->xc_ctx->ticket = xlog_cil_ticket_alloc(log);
log->l_cilp->xc_ctx->sequence = 1;
*/
STATIC void
xfs_cil_prepare_item(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *lv,
int *len,
int *diff_iovecs)
*/
static void
xlog_cil_insert_items(
- struct log *log,
+ struct xlog *log,
struct xfs_log_vec *log_vector,
struct xlog_ticket *ticket)
{
*/
STATIC int
xlog_cil_push(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
struct xfs_log_vec *lv;
*/
static void
xlog_cil_push_background(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil = log->l_cilp;
static void
xlog_cil_push_foreground(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t push_seq)
{
struct xfs_cil *cil = log->l_cilp;
xfs_lsn_t *commit_lsn,
int flags)
{
- struct log *log = mp->m_log;
+ struct xlog *log = mp->m_log;
int log_flags = 0;
struct xfs_log_vec *log_vector;
*/
xfs_lsn_t
xlog_cil_force_lsn(
- struct log *log,
+ struct xlog *log,
xfs_lsn_t sequence)
{
struct xfs_cil *cil = log->l_cilp;
*/
int
xlog_cil_init(
- struct log *log)
+ struct xlog *log)
{
struct xfs_cil *cil;
struct xfs_cil_ctx *ctx;
void
xlog_cil_destroy(
- struct log *log)
+ struct xlog *log)
{
if (log->l_cilp->xc_ctx) {
if (log->l_cilp->xc_ctx->ticket)
#define __XFS_LOG_PRIV_H__
struct xfs_buf;
-struct log;
+struct xlog;
struct xlog_ticket;
struct xfs_mount;
struct xlog_in_core *ic_next;
struct xlog_in_core *ic_prev;
struct xfs_buf *ic_bp;
- struct log *ic_log;
+ struct xlog *ic_log;
int ic_size;
int ic_offset;
int ic_bwritecnt;
* operations almost as efficient as the old logging methods.
*/
struct xfs_cil {
- struct log *xc_log;
+ struct xlog *xc_log;
struct list_head xc_cil;
spinlock_t xc_cil_lock;
struct xfs_cil_ctx *xc_ctx;
* overflow 31 bits worth of byte offset, so using a byte number will mean
* that round off problems won't occur when releasing partial reservations.
*/
-typedef struct log {
+typedef struct xlog {
/* The following fields don't need locking */
struct xfs_mount *l_mp; /* mount point */
struct xfs_ail *l_ailp; /* AIL log is working with */
extern void xlog_pack_data(xlog_t *log, xlog_in_core_t *iclog, int);
extern kmem_zone_t *xfs_log_ticket_zone;
-struct xlog_ticket *xlog_ticket_alloc(struct log *log, int unit_bytes,
- int count, char client, bool permanent,
- xfs_km_flags_t alloc_flags);
+struct xlog_ticket *
+xlog_ticket_alloc(
+ struct xlog *log,
+ int unit_bytes,
+ int count,
+ char client,
+ bool permanent,
+ xfs_km_flags_t alloc_flags);
static inline void
}
void xlog_print_tic_res(struct xfs_mount *mp, struct xlog_ticket *ticket);
-int xlog_write(struct log *log, struct xfs_log_vec *log_vector,
- struct xlog_ticket *tic, xfs_lsn_t *start_lsn,
- xlog_in_core_t **commit_iclog, uint flags);
+int
+xlog_write(
+ struct xlog *log,
+ struct xfs_log_vec *log_vector,
+ struct xlog_ticket *tic,
+ xfs_lsn_t *start_lsn,
+ struct xlog_in_core **commit_iclog,
+ uint flags);
/*
* When we crack an atomic LSN, we sample it first so that the value will not
/*
* Committed Item List interfaces
*/
-int xlog_cil_init(struct log *log);
-void xlog_cil_init_post_recovery(struct log *log);
-void xlog_cil_destroy(struct log *log);
+int
+xlog_cil_init(struct xlog *log);
+void
+xlog_cil_init_post_recovery(struct xlog *log);
+void
+xlog_cil_destroy(struct xlog *log);
/*
* CIL force routines
*/
-xfs_lsn_t xlog_cil_force_lsn(struct log *log, xfs_lsn_t sequence);
+xfs_lsn_t
+xlog_cil_force_lsn(
+ struct xlog *log,
+ xfs_lsn_t sequence);
static inline void
-xlog_cil_force(struct log *log)
+xlog_cil_force(struct xlog *log)
{
xlog_cil_force_lsn(log, log->l_cilp->xc_current_sequence);
}
STATIC int
xlog_recover_add_to_cont_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_add_to_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
xfs_caddr_t dp,
int len)
{
*/
STATIC int
xlog_recover_reorder_trans(
- struct log *log,
- xlog_recover_t *trans,
+ struct xlog *log,
+ struct xlog_recover *trans,
int pass)
{
xlog_recover_item_t *item, *n;
*/
STATIC int
xlog_recover_buffer_pass1(
- struct log *log,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover_item *item)
{
xfs_buf_log_format_t *buf_f = item->ri_buf[0].i_addr;
struct list_head *bucket;
*/
STATIC int
xlog_check_buffer_cancelled(
- struct log *log,
+ struct xlog *log,
xfs_daddr_t blkno,
uint len,
ushort flags)
STATIC int
xlog_recover_commit_pass1(
- struct log *log,
- struct xlog_recover *trans,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS1);
STATIC int
xlog_recover_commit_pass2(
- struct log *log,
- struct xlog_recover *trans,
- struct list_head *buffer_list,
- xlog_recover_item_t *item)
+ struct xlog *log,
+ struct xlog_recover *trans,
+ struct list_head *buffer_list,
+ struct xlog_recover_item *item)
{
trace_xfs_log_recover_item_recover(log, trans, item, XLOG_RECOVER_PASS2);
*/
STATIC int
xlog_recover_commit_trans(
- struct log *log,
+ struct xlog *log,
struct xlog_recover *trans,
int pass)
{
STATIC int
xlog_recover_unmount_trans(
- struct log *log,
- xlog_recover_t *trans)
+ struct xlog *log,
+ struct xlog_recover *trans)
{
/* Do nothing now */
xfs_warn(log->l_mp, "%s: Unmount LR", __func__);
#include "xfs_sync.h"
-struct log;
+struct xlog;
struct xfs_mount_args;
struct xfs_inode;
struct xfs_bmbt_irec;
uint m_readio_blocks; /* min read size blocks */
uint m_writeio_log; /* min write size log bytes */
uint m_writeio_blocks; /* min write size blocks */
- struct log *m_log; /* log specific stuff */
+ struct xlog *m_log; /* log specific stuff */
int m_logbufs; /* number of log buffers */
int m_logbsize; /* size of each log buffer */
uint m_rsumlevels; /* rt summary levels */
* We shouldn't write/force the log if we are in the mount/unmount
* process or on a read only filesystem. The workqueue still needs to be
* active in both cases, however, because it is used for inode reclaim
- * during these times. Use the s_umount semaphore to provide exclusion
- * with unmount.
+ * during these times. Use the MS_ACTIVE flag to avoid doing anything
+ * during mount. Doing work during unmount is avoided by calling
+ * cancel_delayed_work_sync on this work queue before tearing down
+ * the ail and the log in xfs_log_unmount.
*/
- if (down_read_trylock(&mp->m_super->s_umount)) {
- if (!(mp->m_flags & XFS_MOUNT_RDONLY)) {
- /* dgc: errors ignored here */
- if (mp->m_super->s_frozen == SB_UNFROZEN &&
- xfs_log_need_covered(mp))
- error = xfs_fs_log_dummy(mp);
- else
- xfs_log_force(mp, 0);
-
- /* start pushing all the metadata that is currently
- * dirty */
- xfs_ail_push_all(mp->m_ail);
- }
- up_read(&mp->m_super->s_umount);
+ if (!(mp->m_super->s_flags & MS_ACTIVE) &&
+ !(mp->m_flags & XFS_MOUNT_RDONLY)) {
+ /* dgc: errors ignored here */
+ if (mp->m_super->s_frozen == SB_UNFROZEN &&
+ xfs_log_need_covered(mp))
+ error = xfs_fs_log_dummy(mp);
+ else
+ xfs_log_force(mp, 0);
+
+ /* start pushing all the metadata that is currently
+ * dirty */
+ xfs_ail_push_all(mp->m_ail);
}
/* queue us up again */
struct xfs_dquot;
struct xfs_log_item;
struct xlog_ticket;
-struct log;
+struct xlog;
struct xlog_recover;
struct xlog_recover_item;
struct xfs_buf_log_format;
DEFINE_DQUOT_EVENT(xfs_dqflush_done);
DECLARE_EVENT_CLASS(xfs_loggrant_class,
- TP_PROTO(struct log *log, struct xlog_ticket *tic),
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic),
TP_ARGS(log, tic),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOGGRANT_EVENT(name) \
DEFINE_EVENT(xfs_loggrant_class, name, \
- TP_PROTO(struct log *log, struct xlog_ticket *tic), \
+ TP_PROTO(struct xlog *log, struct xlog_ticket *tic), \
TP_ARGS(log, tic))
DEFINE_LOGGRANT_EVENT(xfs_log_done_nonperm);
DEFINE_LOGGRANT_EVENT(xfs_log_done_perm);
DEFINE_SWAPEXT_EVENT(xfs_swap_extent_after);
DECLARE_EVENT_CLASS(xfs_log_recover_item_class,
- TP_PROTO(struct log *log, struct xlog_recover *trans,
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans,
struct xlog_recover_item *item, int pass),
TP_ARGS(log, trans, item, pass),
TP_STRUCT__entry(
#define DEFINE_LOG_RECOVER_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_item_class, name, \
- TP_PROTO(struct log *log, struct xlog_recover *trans, \
+ TP_PROTO(struct xlog *log, struct xlog_recover *trans, \
struct xlog_recover_item *item, int pass), \
TP_ARGS(log, trans, item, pass))
DEFINE_LOG_RECOVER_ITEM(xfs_log_recover_item_recover);
DECLARE_EVENT_CLASS(xfs_log_recover_buf_item_class,
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f),
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f),
TP_ARGS(log, buf_f),
TP_STRUCT__entry(
__field(dev_t, dev)
#define DEFINE_LOG_RECOVER_BUF_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_buf_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_buf_log_format *buf_f), \
+ TP_PROTO(struct xlog *log, struct xfs_buf_log_format *buf_f), \
TP_ARGS(log, buf_f))
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_not_cancel);
DEFINE_LOG_RECOVER_BUF_ITEM(xfs_log_recover_buf_dquot_buf);
DECLARE_EVENT_CLASS(xfs_log_recover_ino_item_class,
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f),
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f),
TP_ARGS(log, in_f),
TP_STRUCT__entry(
__field(dev_t, dev)
)
#define DEFINE_LOG_RECOVER_INO_ITEM(name) \
DEFINE_EVENT(xfs_log_recover_ino_item_class, name, \
- TP_PROTO(struct log *log, struct xfs_inode_log_format *in_f), \
+ TP_PROTO(struct xlog *log, struct xfs_inode_log_format *in_f), \
TP_ARGS(log, in_f))
DEFINE_LOG_RECOVER_INO_ITEM(xfs_log_recover_inode_recover);
#define _ASM_GENERIC_BUG_H
#include <linux/compiler.h>
-#include <linux/kernel.h>
#ifdef CONFIG_BUG
#endif /* CONFIG_GENERIC_BUG */
+#ifndef __ASSEMBLY__
+#include <linux/kernel.h>
+
/*
* Don't use BUG() or BUG_ON() unless there's really no way out; one
* example might be detecting data structure corruption in the middle
* to provide better diagnostics.
*/
#ifndef __WARN_TAINT
-#ifndef __ASSEMBLY__
extern __printf(3, 4)
void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...);
const char *fmt, ...);
extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
-#endif
#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#define __WARN_printf_taint(taint, arg...) \
# define WARN_ON_SMP(x) ({0;})
#endif
+#endif /* __ASSEMBLY__ */
+
#endif
/*
* The barrier will stabilize the pmdval in a register or on
* the stack so that it will stop changing under the code.
+ *
+ * When CONFIG_TRANSPARENT_HUGEPAGE=y on x86 32bit PAE,
+ * pmd_read_atomic is allowed to return a not atomic pmdval
+ * (for example pointing to an hugepage that has never been
+ * mapped in the pmd). The below checks will only care about
+ * the low part of the pmd with 32bit PAE x86 anyway, with the
+ * exception of pmd_none(). So the important thing is that if
+ * the low part of the pmd is found null, the high part will
+ * be also null or the pmd_none() check below would be
+ * confused.
*/
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
barrier();
-/*
- This file is auto-generated from the drm_pciids.txt in the DRM CVS
- Please contact dri-devel@lists.sf.net to add new cards to this list
-*/
#define radeon_PCI_IDS \
{0x1002, 0x3150, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY}, \
{0x1002, 0x3151, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \
*/
#if !defined(CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING) || \
!defined(CONFIG_OPTIMIZE_INLINING) || (__GNUC__ < 4)
-# define inline inline __attribute__((always_inline))
-# define __inline__ __inline__ __attribute__((always_inline))
-# define __inline __inline __attribute__((always_inline))
+# define inline inline __attribute__((always_inline)) notrace
+# define __inline__ __inline__ __attribute__((always_inline)) notrace
+# define __inline __inline __attribute__((always_inline)) notrace
#else
/* A lot of inline functions can cause havoc with function tracing */
# define inline inline notrace
* is passed to the kernel.
*/
enum kmsg_dump_reason {
+ KMSG_DUMP_UNDEF,
KMSG_DUMP_PANIC,
KMSG_DUMP_OOPS,
KMSG_DUMP_EMERG,
/**
* struct kmsg_dumper - kernel crash message dumper structure
- * @dump: The callback which gets called on crashes. The buffer is passed
- * as two sections, where s1 (length l1) contains the older
- * messages and s2 (length l2) contains the newer.
* @list: Entry in the dumper list (private)
+ * @dump: Call into dumping code which will retrieve the data with
+ * through the record iterator
+ * @max_reason: filter for highest reason number that should be dumped
* @registered: Flag that specifies if this is already registered
*/
struct kmsg_dumper {
- void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason,
- const char *s1, unsigned long l1,
- const char *s2, unsigned long l2);
struct list_head list;
- int registered;
+ void (*dump)(struct kmsg_dumper *dumper, enum kmsg_dump_reason reason);
+ enum kmsg_dump_reason max_reason;
+ bool active;
+ bool registered;
+
+ /* private state of the kmsg iterator */
+ u32 cur_idx;
+ u32 next_idx;
+ u64 cur_seq;
+ u64 next_seq;
};
#ifdef CONFIG_PRINTK
void kmsg_dump(enum kmsg_dump_reason reason);
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len);
+
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len);
+
+void kmsg_dump_rewind(struct kmsg_dumper *dumper);
+
int kmsg_dump_register(struct kmsg_dumper *dumper);
int kmsg_dump_unregister(struct kmsg_dumper *dumper);
{
}
+static inline bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ const char *line, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ return false;
+}
+
+static inline void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+}
+
static inline int kmsg_dump_register(struct kmsg_dumper *dumper)
{
return -EINVAL;
};
union {
+#if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
+ defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
/* Used for cmpxchg_double in slub */
unsigned long counters;
+#else
+ /*
+ * Keep _count separate from slub cmpxchg_double data.
+ * As the rest of the double word is protected by
+ * slab_lock but _count is not.
+ */
+ unsigned counters;
+#endif
struct {
* SDHCI declarations specific to ST SPEAr platform
*
* Copyright (C) 2010 ST Microelectronics
- * Viresh Kumar<viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
#define SDIO_CCCR_IF 0x07 /* bus interface controls */
+#define SDIO_BUS_WIDTH_MASK 0x03 /* data bus width setting */
#define SDIO_BUS_WIDTH_1BIT 0x00
+#define SDIO_BUS_WIDTH_RESERVED 0x01
#define SDIO_BUS_WIDTH_4BIT 0x02
#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */
#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */
*/
struct nfs_client {
atomic_t cl_count;
+ atomic_t cl_mds_count;
int cl_cons_state; /* current construction state (-ve: init error) */
#define NFS_CS_READY 0 /* ready to be used */
#define NFS_CS_INITING 1 /* busy initialising */
* Arasan Compact Flash host controller platform data header file
*
* Copyright (C) 2011 ST Microelectronics
- * Viresh Kumar <viresh.kumar@st.com>
+ * Viresh Kumar <viresh.linux@gmail.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
size_t size,
bool ecc);
void persistent_ram_free(struct persistent_ram_zone *prz);
+void persistent_ram_zap(struct persistent_ram_zone *prz);
struct persistent_ram_zone *persistent_ram_init_ringbuffer(struct device *dev,
bool ecc);
int persistent_ram_write(struct persistent_ram_zone *prz, const void *s,
unsigned int count);
+void persistent_ram_save_old(struct persistent_ram_zone *prz);
size_t persistent_ram_old_size(struct persistent_ram_zone *prz);
void *persistent_ram_old(struct persistent_ram_zone *prz);
void persistent_ram_free_old(struct persistent_ram_zone *prz);
PXA25x_SSP, /* pxa 210, 250, 255, 26x */
PXA25x_NSSP, /* pxa 255, 26x (including ASSP) */
PXA27x_SSP,
+ PXA3xx_SSP,
PXA168_SSP,
+ PXA910_SSP,
CE4100_SSP,
};
void (*cs_control)(u32 command);
};
-#ifdef CONFIG_ARCH_PXA
+#if defined(CONFIG_ARCH_PXA) || defined(CONFIG_ARCH_MMP)
#include <linux/clk.h>
#include <mach/dma.h>
* vga_switcheroo.h - Support for laptop with dual GPU using one set of outputs
*/
+#ifndef _LINUX_VGA_SWITCHEROO_H_
+#define _LINUX_VGA_SWITCHEROO_H_
+
#include <linux/fb.h>
+struct pci_dev;
+
enum vga_switcheroo_state {
VGA_SWITCHEROO_OFF,
VGA_SWITCHEROO_ON,
#endif
+#endif /* _LINUX_VGA_SWITCHEROO_H_ */
EXPORT_SYMBOL_GPL(cgroup_lock_is_held);
+static int css_unbias_refcnt(int refcnt)
+{
+ return refcnt >= 0 ? refcnt : refcnt - CSS_DEACT_BIAS;
+}
+
/* the current nr of refs, always >= 0 whether @css is deactivated or not */
static int css_refcnt(struct cgroup_subsys_state *css)
{
int v = atomic_read(&css->refcnt);
- return v >= 0 ? v : v - CSS_DEACT_BIAS;
+ return css_unbias_refcnt(v);
}
/* convenient tests for these bits */
void __css_put(struct cgroup_subsys_state *css)
{
struct cgroup *cgrp = css->cgroup;
+ int v;
rcu_read_lock();
- atomic_dec(&css->refcnt);
- switch (css_refcnt(css)) {
+ v = css_unbias_refcnt(atomic_dec_return(&css->refcnt));
+
+ switch (v) {
case 1:
if (notify_on_release(cgrp)) {
set_bit(CGRP_RELEASABLE, &cgrp->flags);
return !event->cgrp || event->cgrp == cpuctx->cgrp;
}
-static inline void perf_get_cgroup(struct perf_event *event)
+static inline bool perf_tryget_cgroup(struct perf_event *event)
{
- css_get(&event->cgrp->css);
+ return css_tryget(&event->cgrp->css);
}
static inline void perf_put_cgroup(struct perf_event *event)
event->cgrp = cgrp;
/* must be done before we fput() the file */
- perf_get_cgroup(event);
+ if (!perf_tryget_cgroup(event)) {
+ event->cgrp = NULL;
+ ret = -ENOENT;
+ goto out;
+ }
/*
* all events in a group must monitor
list_del_rcu(&p->tasks);
list_del_init(&p->sibling);
__this_cpu_dec(process_counts);
+ /*
+ * If we are the last child process in a pid namespace to be
+ * reaped, notify the reaper sleeping zap_pid_ns_processes().
+ */
+ if (IS_ENABLED(CONFIG_PID_NS)) {
+ struct task_struct *parent = p->real_parent;
+
+ if ((task_active_pid_ns(parent)->child_reaper == parent) &&
+ list_empty(&parent->children) &&
+ (parent->flags & PF_EXITING))
+ wake_up_process(parent);
+ }
}
list_del_rcu(&p->thread_group);
}
mm_release(tsk, mm);
if (!mm)
return;
+ sync_mm_rss(mm);
/*
* Serialize with any possible pending coredump.
* We must hold mmap_sem around checking core_state
zap_pid_ns_processes(pid_ns);
write_lock_irq(&tasklist_lock);
- /*
- * We can not clear ->child_reaper or leave it alone.
- * There may by stealth EXIT_DEAD tasks on ->children,
- * forget_original_parent() must move them somewhere.
- */
- pid_ns->child_reaper = init_pid_ns.child_reaper;
} else if (father->signal->has_child_subreaper) {
struct task_struct *reaper;
}
read_unlock(&tasklist_lock);
+ /* Firstly reap the EXIT_ZOMBIE children we may have. */
do {
clear_thread_flag(TIF_SIGPENDING);
rc = sys_wait4(-1, NULL, __WALL, NULL);
} while (rc != -ECHILD);
+ /*
+ * sys_wait4() above can't reap the TASK_DEAD children.
+ * Make sure they all go away, see __unhash_process().
+ */
+ for (;;) {
+ bool need_wait = false;
+
+ read_lock(&tasklist_lock);
+ if (!list_empty(¤t->children)) {
+ __set_current_state(TASK_UNINTERRUPTIBLE);
+ need_wait = true;
+ }
+ read_unlock(&tasklist_lock);
+
+ if (!need_wait)
+ break;
+ schedule();
+ }
+
if (pid_ns->reboot)
current->signal->group_exit_code = pid_ns->reboot;
#define LOG_LINE_MAX 1024
/* record buffer */
-#if !defined(CONFIG_64BIT) || defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
+#if defined(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS)
#define LOG_ALIGN 4
#else
-#define LOG_ALIGN 8
+#define LOG_ALIGN __alignof__(struct log)
#endif
#define __LOG_BUF_LEN (1 << CONFIG_LOG_BUF_SHIFT)
static char __log_buf[__LOG_BUF_LEN] __aligned(LOG_ALIGN);
if (!user)
return -EBADF;
- mutex_lock(&user->lock);
+ ret = mutex_lock_interruptible(&user->lock);
+ if (ret)
+ return ret;
raw_spin_lock(&logbuf_lock);
while (user->seq == log_next_seq) {
if (file->f_flags & O_NONBLOCK) {
syslog_seq++;
raw_spin_unlock_irq(&logbuf_lock);
- if (len > 0 && copy_to_user(buf, text, len))
+ if (len > size)
+ len = -EINVAL;
+ else if (len > 0 && copy_to_user(buf, text, len))
len = -EFAULT;
kfree(text);
/*
* Find first record that fits, including all following records,
* into the user-provided buffer for this dump.
- */
+ */
seq = clear_seq;
idx = clear_idx;
while (seq < log_next_seq) {
idx = log_next(idx);
seq++;
}
+
+ /* move first record forward until length fits into the buffer */
seq = clear_seq;
idx = clear_idx;
while (len > size && seq < log_next_seq) {
seq++;
}
- /* last message in this dump */
+ /* last message fitting into this dump */
next_seq = log_next_seq;
len = 0;
{
bool clear = false;
static int saved_console_loglevel = -1;
+ static DEFINE_MUTEX(syslog_mutex);
int error;
error = check_syslog_permissions(type, from_file);
error = -EFAULT;
goto out;
}
+ error = mutex_lock_interruptible(&syslog_mutex);
+ if (error)
+ goto out;
error = wait_event_interruptible(log_wait,
syslog_seq != log_next_seq);
- if (error)
+ if (error) {
+ mutex_unlock(&syslog_mutex);
goto out;
+ }
error = syslog_print(buf, len);
+ mutex_unlock(&syslog_mutex);
break;
/* Read/clear last kernel messages */
case SYSLOG_ACTION_READ_CLEAR:
* kmsg_dump - dump kernel log to kernel message dumpers.
* @reason: the reason (oops, panic etc) for dumping
*
- * Iterate through each of the dump devices and call the oops/panic
- * callbacks with the log buffer.
+ * Call each of the registered dumper's dump() callback, which can
+ * retrieve the kmsg records with kmsg_dump_get_line() or
+ * kmsg_dump_get_buffer().
*/
void kmsg_dump(enum kmsg_dump_reason reason)
{
- u64 idx;
struct kmsg_dumper *dumper;
- const char *s1, *s2;
- unsigned long l1, l2;
unsigned long flags;
if ((reason > KMSG_DUMP_OOPS) && !always_kmsg_dump)
return;
- /* Theoretically, the log could move on after we do this, but
- there's not a lot we can do about that. The new messages
- will overwrite the start of what we dump. */
+ rcu_read_lock();
+ list_for_each_entry_rcu(dumper, &dump_list, list) {
+ if (dumper->max_reason && reason > dumper->max_reason)
+ continue;
+
+ /* initialize iterator with data about the stored records */
+ dumper->active = true;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+
+ /* invoke dumper which will iterate over records */
+ dumper->dump(dumper, reason);
+
+ /* reset iterator */
+ dumper->active = false;
+ }
+ rcu_read_unlock();
+}
+
+/**
+ * kmsg_dump_get_line - retrieve one kmsg log line
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the beginning of the kmsg buffer, with the oldest kmsg
+ * record, and copy one record into the provided buffer.
+ *
+ * Consecutive calls will return the next available record moving
+ * towards the end of the buffer with the youngest messages.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_line(struct kmsg_dumper *dumper, bool syslog,
+ char *line, size_t size, size_t *len)
+{
+ unsigned long flags;
+ struct log *msg;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
raw_spin_lock_irqsave(&logbuf_lock, flags);
- if (syslog_seq < log_first_seq)
- idx = syslog_idx;
- else
- idx = log_first_idx;
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= log_next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
- if (idx > log_next_idx) {
- s1 = log_buf;
- l1 = log_next_idx;
+ msg = log_from_idx(dumper->cur_idx);
+ l = msg_print_text(msg, syslog,
+ line, size);
- s2 = log_buf + idx;
- l2 = log_buf_len - idx;
- } else {
- s1 = "";
- l1 = 0;
+ dumper->cur_idx = log_next(dumper->cur_idx);
+ dumper->cur_seq++;
+ ret = true;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_line);
+
+/**
+ * kmsg_dump_get_buffer - copy kmsg log lines
+ * @dumper: registered kmsg dumper
+ * @syslog: include the "<4>" prefixes
+ * @line: buffer to copy the line to
+ * @size: maximum size of the buffer
+ * @len: length of line placed into buffer
+ *
+ * Start at the end of the kmsg buffer and fill the provided buffer
+ * with as many of the the *youngest* kmsg records that fit into it.
+ * If the buffer is large enough, all available kmsg records will be
+ * copied with a single call.
+ *
+ * Consecutive calls will fill the buffer with the next block of
+ * available older records, not including the earlier retrieved ones.
+ *
+ * A return value of FALSE indicates that there are no more records to
+ * read.
+ */
+bool kmsg_dump_get_buffer(struct kmsg_dumper *dumper, bool syslog,
+ char *buf, size_t size, size_t *len)
+{
+ unsigned long flags;
+ u64 seq;
+ u32 idx;
+ u64 next_seq;
+ u32 next_idx;
+ size_t l = 0;
+ bool ret = false;
+
+ if (!dumper->active)
+ goto out;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ if (dumper->cur_seq < log_first_seq) {
+ /* messages are gone, move to first available one */
+ dumper->cur_seq = log_first_seq;
+ dumper->cur_idx = log_first_idx;
+ }
+
+ /* last entry */
+ if (dumper->cur_seq >= dumper->next_seq) {
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+ goto out;
+ }
+
+ /* calculate length of entire buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
- s2 = log_buf + idx;
- l2 = log_next_idx - idx;
+ /* move first record forward until length fits into the buffer */
+ seq = dumper->cur_seq;
+ idx = dumper->cur_idx;
+ while (l > size && seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l -= msg_print_text(msg, true, NULL, 0);
+ idx = log_next(idx);
+ seq++;
+ }
+
+ /* last message in next interation */
+ next_seq = seq;
+ next_idx = idx;
+
+ l = 0;
+ while (seq < dumper->next_seq) {
+ struct log *msg = log_from_idx(idx);
+
+ l += msg_print_text(msg, syslog,
+ buf + l, size - l);
+
+ idx = log_next(idx);
+ seq++;
}
+
+ dumper->next_seq = next_seq;
+ dumper->next_idx = next_idx;
+ ret = true;
raw_spin_unlock_irqrestore(&logbuf_lock, flags);
+out:
+ if (len)
+ *len = l;
+ return ret;
+}
+EXPORT_SYMBOL_GPL(kmsg_dump_get_buffer);
- rcu_read_lock();
- list_for_each_entry_rcu(dumper, &dump_list, list)
- dumper->dump(dumper, reason, s1, l1, s2, l2);
- rcu_read_unlock();
+/**
+ * kmsg_dump_rewind - reset the interator
+ * @dumper: registered kmsg dumper
+ *
+ * Reset the dumper's iterator so that kmsg_dump_get_line() and
+ * kmsg_dump_get_buffer() can be called again and used multiple
+ * times within the same dumper.dump() callback.
+ */
+void kmsg_dump_rewind(struct kmsg_dumper *dumper)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&logbuf_lock, flags);
+ dumper->cur_seq = clear_seq;
+ dumper->cur_idx = clear_idx;
+ dumper->next_seq = log_next_seq;
+ dumper->next_idx = log_next_idx;
+ raw_spin_unlock_irqrestore(&logbuf_lock, flags);
}
+EXPORT_SYMBOL_GPL(kmsg_dump_rewind);
#endif
else
return -EINVAL;
break;
- case PR_GET_TID_ADDRESS:
- error = prctl_get_tid_address(me, (int __user **)arg2);
- break;
default:
return -EINVAL;
}
case PR_SET_MM:
error = prctl_set_mm(arg2, arg3, arg4, arg5);
break;
+ case PR_GET_TID_ADDRESS:
+ error = prctl_get_tid_address(me, (int __user **)arg2);
+ break;
case PR_SET_CHILD_SUBREAPER:
me->signal->is_child_subreaper = !!arg2;
error = 0;
bool should_fail(struct fault_attr *attr, ssize_t size)
{
+ /* No need to check any other properties if the probability is 0 */
+ if (attr->probability == 0)
+ return false;
+
if (attr->task_filter && !fail_task(attr, current))
return false;
}
}
-static int __init_memblock memblock_double_array(struct memblock_type *type)
+/**
+ * memblock_double_array - double the size of the memblock regions array
+ * @type: memblock type of the regions array being doubled
+ * @new_area_start: starting address of memory range to avoid overlap with
+ * @new_area_size: size of memory range to avoid overlap with
+ *
+ * Double the size of the @type regions array. If memblock is being used to
+ * allocate memory for a new reserved regions array and there is a previously
+ * allocated memory range [@new_area_start,@new_area_start+@new_area_size]
+ * waiting to be reserved, ensure the memory used by the new array does
+ * not overlap.
+ *
+ * RETURNS:
+ * 0 on success, -1 on failure.
+ */
+static int __init_memblock memblock_double_array(struct memblock_type *type,
+ phys_addr_t new_area_start,
+ phys_addr_t new_area_size)
{
struct memblock_region *new_array, *old_array;
phys_addr_t old_size, new_size, addr;
new_array = kmalloc(new_size, GFP_KERNEL);
addr = new_array ? __pa(new_array) : 0;
} else {
- addr = memblock_find_in_range(0, MEMBLOCK_ALLOC_ACCESSIBLE, new_size, sizeof(phys_addr_t));
+ /* only exclude range when trying to double reserved.regions */
+ if (type != &memblock.reserved)
+ new_area_start = new_area_size = 0;
+
+ addr = memblock_find_in_range(new_area_start + new_area_size,
+ memblock.current_limit,
+ new_size, sizeof(phys_addr_t));
+ if (!addr && new_area_size)
+ addr = memblock_find_in_range(0,
+ min(new_area_start, memblock.current_limit),
+ new_size, sizeof(phys_addr_t));
+
new_array = addr ? __va(addr) : 0;
}
if (!addr) {
*/
if (!insert) {
while (type->cnt + nr_new > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, obase, size) < 0)
return -ENOMEM;
insert = true;
goto repeat;
/* we'll create at most two more regions */
while (type->cnt + 2 > type->max)
- if (memblock_double_array(type) < 0)
+ if (memblock_double_array(type, base, size) < 0)
return -ENOMEM;
for (i = 0; i < type->cnt; i++) {
* __next_free_mem_range - next function for for_each_free_mem_range()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Find the first free area from *@idx which matches @nid, fill the out
* parameters, and update *@idx for the next iteration. The lower 32bit of
* __next_free_mem_range_rev - next function for for_each_free_mem_range_reverse()
* @idx: pointer to u64 loop variable
* @nid: nid: node selector, %MAX_NUMNODES for all nodes
- * @p_start: ptr to phys_addr_t for start address of the range, can be %NULL
- * @p_end: ptr to phys_addr_t for end address of the range, can be %NULL
- * @p_nid: ptr to int for nid of the range, can be %NULL
+ * @out_start: ptr to phys_addr_t for start address of the range, can be %NULL
+ * @out_end: ptr to phys_addr_t for end address of the range, can be %NULL
+ * @out_nid: ptr to int for nid of the range, can be %NULL
*
* Reverse of __next_free_mem_range().
*/
{
if (root_memcg == memcg)
return true;
- if (!root_memcg->use_hierarchy)
+ if (!root_memcg->use_hierarchy || !memcg)
return false;
return css_is_ancestor(&memcg->css, &root_memcg->css);
}
/**
* mem_cgroup_margin - calculate chargeable space of a memory cgroup
- * @mem: the memory cgroup
+ * @memcg: the memory cgroup
*
* Returns the maximum amount of memory @mem can be charged with, in
* pages.
/**
* test_mem_cgroup_node_reclaimable
- * @mem: the target memcg
+ * @memcg: the target memcg
* @nid: the node ID to be checked.
* @noswap : specify true here if the user wants flle only information.
*
next = pmd_addr_end(addr, end);
if (pmd_trans_huge(*pmd)) {
if (next - addr != HPAGE_PMD_SIZE) {
- VM_BUG_ON(!rwsem_is_locked(&tlb->mm->mmap_sem));
+#ifdef CONFIG_DEBUG_VM
+ if (!rwsem_is_locked(&tlb->mm->mmap_sem)) {
+ pr_err("%s: mmap_sem is unlocked! addr=0x%lx end=0x%lx vma->vm_start=0x%lx vma->vm_end=0x%lx\n",
+ __func__, addr, end,
+ vma->vm_start,
+ vma->vm_end);
+ BUG();
+ }
+#endif
split_huge_page_pmd(vma->vm_mm, pmd);
} else if (zap_huge_pmd(tlb, vma, pmd, addr))
goto next;
/**
* zap_page_range - remove user pages in a given range
* @vma: vm_area_struct holding the applicable pages
- * @address: starting address of pages to zap
+ * @start: starting address of pages to zap
* @size: number of bytes to zap
* @details: details of nonlinear truncation or shared cache invalidation
*
if (!list_empty(&pagelist)) {
nr_failed = migrate_pages(&pagelist, new_vma_page,
(unsigned long)vma,
- false, true);
+ false, MIGRATE_SYNC);
if (nr_failed)
putback_lru_pages(&pagelist);
}
const nodemask_t *nodemask, unsigned long totalpages)
{
long points;
+ long adj;
if (oom_unkillable_task(p, memcg, nodemask))
return 0;
if (!p)
return 0;
- if (p->signal->oom_score_adj == OOM_SCORE_ADJ_MIN) {
+ adj = p->signal->oom_score_adj;
+ if (adj == OOM_SCORE_ADJ_MIN) {
task_unlock(p);
return 0;
}
* implementation used by LSMs.
*/
if (has_capability_noaudit(p, CAP_SYS_ADMIN))
- points -= 30 * totalpages / 1000;
+ adj -= 30;
- /*
- * /proc/pid/oom_score_adj ranges from -1000 to +1000 such that it may
- * either completely disable oom killing or always prefer a certain
- * task.
- */
- points += p->signal->oom_score_adj * totalpages / 1000;
+ /* Normalize to oom_score_adj units */
+ adj *= totalpages / 1000;
+ points += adj;
/*
* Never return 0 for an eligible task regardless of the root bonus and
/**
* dump_tasks - dump current memory state of all system tasks
- * @mem: current's memory controller, if constrained
+ * @memcg: current's memory controller, if constrained
* @nodemask: nodemask passed to page allocator for mempolicy ooms
*
* Dumps the current memory state of all eligible tasks. Tasks not in the same
/**
* swap_cgroup_cmpxchg - cmpxchg mem_cgroup's id for this swp_entry.
- * @end: swap entry to be cmpxchged
+ * @ent: swap entry to be cmpxchged
* @old: old id
* @new: new id
*
/**
* swap_cgroup_record - record mem_cgroup for this swp_entry.
* @ent: swap entry to be recorded into
- * @mem: mem_cgroup to be recorded
+ * @id: mem_cgroup to be recorded
*
* Returns old value at success, 0 at failure.
* (Of course, old value can be 0.)
/**
* walk_page_range - walk a memory map's page tables with a callback
- * @mm: memory map to walk
* @addr: starting address
* @end: ending address
* @walk: set of callbacks to invoke for each level of the tree
* @chunk: chunk to depopulate
* @off: offset to the area to depopulate
* @size: size of the area to depopulate in bytes
- * @flush: whether to flush cache and tlb or not
*
* For each cpu, depopulate and unmap pages [@page_start,@page_end)
* from @chunk. If @flush is true, vcache is flushed before unmapping
s = rest_of_page(data);
if (s > count)
s = count;
+ BUG_ON(index > limit);
sg_set_buf(&sg[index++], data, s);
count -= s;
data += s;
- BUG_ON(index > limit);
}
return index-start;
/* unmount */
ceph_osdc_stop(&client->osdc);
- /*
- * make sure osd connections close out before destroying the
- * auth module, which is needed to free those connections'
- * ceph_authorizers.
- */
- ceph_msgr_flush();
-
ceph_monc_stop(&client->monc);
ceph_debugfs_client_cleanup(client);
m->hdr.seq = cpu_to_le64(++con->out_seq);
m->needs_out_seq = false;
}
+#ifdef CONFIG_BLOCK
+ else
+ m->bio_iter = NULL;
+#endif
dout("prepare_write_message %p seq %lld type %d len %d+%d+%d %d pgs\n",
m, con->out_seq, le16_to_cpu(m->hdr.type),
mutex_unlock(&monc->mutex);
+ /*
+ * flush msgr queue before we destroy ourselves to ensure that:
+ * - any work that references our embedded con is finished.
+ * - any osd_client or other work that may reference an authorizer
+ * finishes before we shut down the auth subsystem.
+ */
+ ceph_msgr_flush();
+
ceph_auth_destroy(monc->auth);
ceph_msg_put(monc->m_auth);
if (req->r_request)
ceph_msg_put(req->r_request);
- if (req->r_reply)
- ceph_msg_put(req->r_reply);
if (req->r_con_filling_msg) {
dout("release_request revoking pages %p from con %p\n",
req->r_pages, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg,
req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
}
+ if (req->r_reply)
+ ceph_msg_put(req->r_reply);
if (req->r_own_pages)
ceph_release_page_vector(req->r_pages,
req->r_num_pages);
if (req->r_con_filling_msg == con && req->r_reply == msg) {
dout(" dropping con_filling_msg ref %p\n", con);
req->r_con_filling_msg = NULL;
- ceph_con_put(con);
+ con->ops->put(con);
}
if (!req->r_got_reply) {
dout("get_reply revoking msg %p from old con %p\n",
req->r_reply, req->r_con_filling_msg);
ceph_con_revoke_message(req->r_con_filling_msg, req->r_reply);
- ceph_con_put(req->r_con_filling_msg);
+ req->r_con_filling_msg->ops->put(req->r_con_filling_msg);
req->r_con_filling_msg = NULL;
}
#endif
}
*skip = 0;
- req->r_con_filling_msg = ceph_con_get(con);
+ req->r_con_filling_msg = con->ops->get(con);
dout("get_reply tid %lld %p\n", tid, m);
out:
push(@signature_tags, "Reviewed-by:");
push(@signature_tags, "Acked-by:");
+my $signature_pattern = "\(" . join("|", @signature_tags) . "\)";
+
# rfc822 email address - preloaded methods go here.
my $rfc822_lwsp = "(?:(?:\\r\\n)?[ \\t])";
my $rfc822_char = '[\\000-\\377]';
my @status = ();
my %deduplicate_name_hash = ();
my %deduplicate_address_hash = ();
-my $signature_pattern;
my @maintainers = get_maintainers();
codec->power_jiffies += delta;
}
-/**
- * snd_hda_power_up - Power-up the codec
- * @codec: HD-audio codec
- *
- * Increment the power-up counter and power up the hardware really when
- * not turned on yet.
- */
-void snd_hda_power_up(struct hda_codec *codec)
+/* Transition to powered up, if wait_power_down then wait for a pending
+ * transition to D3 to complete. A pending D3 transition is indicated
+ * with power_transition == -1. */
+static void __snd_hda_power_up(struct hda_codec *codec, bool wait_power_down)
{
struct hda_bus *bus = codec->bus;
spin_lock(&codec->power_lock);
codec->power_count++;
- if (codec->power_on || codec->power_transition > 0) {
+ /* Return if power_on or transitioning to power_on, unless currently
+ * powering down. */
+ if ((codec->power_on || codec->power_transition > 0) &&
+ !(wait_power_down && codec->power_transition < 0)) {
spin_unlock(&codec->power_lock);
return;
}
codec->power_transition = 0;
spin_unlock(&codec->power_lock);
}
+
+/**
+ * snd_hda_power_up - Power-up the codec
+ * @codec: HD-audio codec
+ *
+ * Increment the power-up counter and power up the hardware really when
+ * not turned on yet.
+ */
+void snd_hda_power_up(struct hda_codec *codec)
+{
+ __snd_hda_power_up(codec, false);
+}
EXPORT_SYMBOL_HDA(snd_hda_power_up);
+/**
+ * snd_hda_power_up_d3wait - Power-up the codec after waiting for any pending
+ * D3 transition to complete. This differs from snd_hda_power_up() when
+ * power_transition == -1. snd_hda_power_up sees this case as a nop,
+ * snd_hda_power_up_d3wait waits for the D3 transition to complete then powers
+ * back up.
+ * @codec: HD-audio codec
+ *
+ * Cancel any power down operation hapenning on the work queue, then power up.
+ */
+void snd_hda_power_up_d3wait(struct hda_codec *codec)
+{
+ /* This will cancel and wait for pending power_work to complete. */
+ __snd_hda_power_up(codec, true);
+}
+EXPORT_SYMBOL_HDA(snd_hda_power_up_d3wait);
+
#define power_save(codec) \
((codec)->bus->power_save ? *(codec)->bus->power_save : 0)
*/
#ifdef CONFIG_SND_HDA_POWER_SAVE
void snd_hda_power_up(struct hda_codec *codec);
+void snd_hda_power_up_d3wait(struct hda_codec *codec);
void snd_hda_power_down(struct hda_codec *codec);
void snd_hda_update_power_acct(struct hda_codec *codec);
#else
static inline void snd_hda_power_up(struct hda_codec *codec) {}
+static inline void snd_hda_power_up_d3wait(struct hda_codec *codec) {}
static inline void snd_hda_power_down(struct hda_codec *codec) {}
#endif
buff_step);
snd_pcm_hw_constraint_step(runtime, 0, SNDRV_PCM_HW_PARAM_PERIOD_BYTES,
buff_step);
- snd_hda_power_up(apcm->codec);
+ snd_hda_power_up_d3wait(apcm->codec);
err = hinfo->ops.open(hinfo, apcm->codec, substream);
if (err < 0) {
azx_release_device(azx_dev);
return ret;
}
+ regcache_cache_only(wm8904->regmap, false);
regcache_sync(wm8904->regmap);
/* Enable bias */
snd_soc_update_bits(codec, WM8904_BIAS_CONTROL_0,
WM8904_BIAS_ENA, 0);
-#ifdef CONFIG_REGULATOR
- /* Post 2.6.34 we will be able to get a callback when
- * the regulators are disabled which we can use but
- * for now just assume that the power will be cut if
- * the regulator API is in use.
- */
- codec->cache_sync = 1;
-#endif
+ regcache_cache_only(wm8904->regmap, true);
+ regcache_mark_dirty(wm8904->regmap);
regulator_bulk_disable(ARRAY_SIZE(wm8904->supplies),
wm8904->supplies);
{
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
struct wm8904_pdata *pdata = wm8904->pdata;
- u16 *reg_cache = codec->reg_cache;
int ret, i;
- codec->cache_sync = 1;
codec->control_data = wm8904->regmap;
switch (wm8904->devtype) {
goto err_enable;
}
+ regcache_cache_only(wm8904->regmap, true);
/* Change some default settings - latch VU and enable ZC */
snd_soc_update_bits(codec, WM8904_ADC_DIGITAL_VOLUME_LEFT,
WM8904_ADC_VU, WM8904_ADC_VU);
if (!pdata->gpio_cfg[i])
continue;
- reg_cache[WM8904_GPIO_CONTROL_1 + i]
- = pdata->gpio_cfg[i] & 0xffff;
+ regmap_update_bits(wm8904->regmap,
+ WM8904_GPIO_CONTROL_1 + i,
+ 0xffff,
+ pdata->gpio_cfg[i]);
}
/* Zero is the default value for these anyway */
for (i = 0; i < WM8904_MIC_REGS; i++)
- reg_cache[WM8904_MIC_BIAS_CONTROL_0 + i]
- = pdata->mic_cfg[i];
+ regmap_update_bits(wm8904->regmap,
+ WM8904_MIC_BIAS_CONTROL_0 + i,
+ 0xffff,
+ pdata->mic_cfg[i]);
}
/* Set Class W by default - this will be managed by the Class
}
}
- regcache_cache_only(codec->control_data, true);
-
/* Apply platform data settings */
snd_soc_update_bits(codec, WM8996_LINE_INPUT_CONTROL,
WM8996_INL_MODE_MASK | WM8996_INR_MODE_MASK,
for (i = 0; i < ARRAY_SIZE(wm8996->supplies); i++)
regulator_unregister_notifier(wm8996->supplies[i].consumer,
&wm8996->disable_nb[i]);
- regulator_bulk_free(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
return 0;
}
dev_info(&i2c->dev, "revision %c\n",
(reg & WM8996_CHIP_REV_MASK) + 'A');
- regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
-
ret = wm8996_reset(wm8996);
if (ret < 0) {
dev_err(&i2c->dev, "Failed to issue reset\n");
goto err_regmap;
}
+ regcache_cache_only(wm8996->regmap, true);
+ regulator_bulk_disable(ARRAY_SIZE(wm8996->supplies), wm8996->supplies);
+
wm8996_init_gpio(wm8996);
ret = snd_soc_register_codec(&i2c->dev,
#include <mach/hardware.h>
#include <mach/dma.h>
-#include <mach/audio.h>
#include "../../arm/pxa2xx-pcm.h"
#include "pxa-ssp.h"
{
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP) {
+ if (ssp->type == PXA25x_SSP) {
sscr0 &= ~0x0000ff00;
sscr0 |= ((div - 2)/2) << 8; /* 2..512 */
} else {
u32 sscr0 = pxa_ssp_read_reg(ssp, SSCR0);
u32 div;
- if (cpu_is_pxa25x() && ssp->type == PXA25x_SSP)
+ if (ssp->type == PXA25x_SSP)
div = ((sscr0 >> 8) & 0xff) * 2 + 2;
else
div = ((sscr0 >> 8) & 0xfff) + 1;
break;
case PXA_SSP_CLK_PLL:
/* Internal PLL is fixed */
- if (cpu_is_pxa25x())
+ if (ssp->type == PXA25x_SSP)
priv->sysclk = 1843200;
else
priv->sysclk = 13000000;
/* The SSP clock must be disabled when changing SSP clock mode
* on PXA2xx. On PXA3xx it must be enabled when doing so. */
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_disable(ssp->clk);
val = pxa_ssp_read_reg(ssp, SSCR0) | sscr0;
pxa_ssp_write_reg(ssp, SSCR0, val);
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
clk_enable(ssp->clk);
return 0;
case PXA_SSP_AUDIO_DIV_SCDB:
val = pxa_ssp_read_reg(ssp, SSACD);
val &= ~SSACD_SCDB;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val &= ~SSACD_SCDX8;
-#endif
switch (div) {
case PXA_SSP_CLK_SCDB_1:
val |= SSACD_SCDB;
break;
case PXA_SSP_CLK_SCDB_4:
break;
-#if defined(CONFIG_PXA3xx)
case PXA_SSP_CLK_SCDB_8:
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
val |= SSACD_SCDX8;
else
return -EINVAL;
break;
-#endif
default:
return -EINVAL;
}
struct ssp_device *ssp = priv->ssp;
u32 ssacd = pxa_ssp_read_reg(ssp, SSACD) & ~0x70;
-#if defined(CONFIG_PXA3xx)
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
pxa_ssp_write_reg(ssp, SSACDD, 0);
-#endif
switch (freq_out) {
case 5622000:
break;
default:
-#ifdef CONFIG_PXA3xx
/* PXA3xx has a clock ditherer which can be used to generate
* a wider range of frequencies - calculate a value for it.
*/
- if (cpu_is_pxa3xx()) {
+ if (ssp->type == PXA3xx_SSP) {
u32 val;
u64 tmp = 19968;
tmp *= 1000000;
val, freq_out);
break;
}
-#endif
return -EINVAL;
}
/* bit size */
switch (params_format(params)) {
case SNDRV_PCM_FORMAT_S16_LE:
-#ifdef CONFIG_PXA3xx
- if (cpu_is_pxa3xx())
+ if (ssp->type == PXA3xx_SSP)
sscr0 |= SSCR0_FPCKE;
-#endif
sscr0 |= SSCR0_DataSize(16);
break;
case SNDRV_PCM_FORMAT_S24_LE:
* trying and failing a lot; some of the registers
* needed for that mode are only available on PXA3xx.
*/
-
-#ifdef CONFIG_PXA3xx
- if (!cpu_is_pxa3xx())
+ if (ssp->type != PXA3xx_SSP)
return -EINVAL;
sspsp |= SSPSP_SFRMWDTH(width * 2);
sspsp |= SSPSP_EDMYSTOP(3);
sspsp |= SSPSP_DMYSTOP(3);
sspsp |= SSPSP_DMYSTRT(1);
-#else
- return -EINVAL;
-#endif
} else {
/* The frame width is the width the LRCLK is
* asserted for; the delay is expressed in
return 0;
}
+static int tegra_wm8903_remove(struct snd_soc_card *card)
+{
+ struct snd_soc_pcm_runtime *rtd = &(card->rtd[0]);
+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
+ struct snd_soc_codec *codec = codec_dai->codec;
+
+ wm8903_mic_detect(codec, NULL, 0, 0);
+
+ return 0;
+}
+
static struct snd_soc_dai_link tegra_wm8903_dai = {
.name = "WM8903",
.stream_name = "WM8903 PCM",
.dai_link = &tegra_wm8903_dai,
.num_links = 1,
+ .remove = tegra_wm8903_remove,
+
.controls = tegra_wm8903_controls,
.num_controls = ARRAY_SIZE(tegra_wm8903_controls),
.dapm_widgets = tegra_wm8903_dapm_widgets,
int ret;
u8 data;
struct usb_device *device = interface_to_usbdev(intf);
- const struct firmware *fw = 0;
+ const struct firmware *fw = NULL;
struct ihex_record *rec = kmalloc(sizeof(struct ihex_record),
GFP_KERNEL);
(get_endpoint(alts, 1)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
get_endpoint(alts, 1)->bSynchAddress != 0 &&
!implicit_fb)) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. bmAttributes %02x, bLength %d, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ get_endpoint(alts, 1)->bmAttributes,
+ get_endpoint(alts, 1)->bLength,
+ get_endpoint(alts, 1)->bSynchAddress);
return -EINVAL;
}
ep = get_endpoint(alts, 1)->bEndpointAddress;
- if (get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
+ if (!implicit_fb &&
+ get_endpoint(alts, 0)->bLength >= USB_DT_ENDPOINT_AUDIO_SIZE &&
(( is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress | USB_DIR_IN)) ||
- (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)) ||
- ( is_playback && !implicit_fb))) {
- snd_printk(KERN_ERR "%d:%d:%d : invalid synch pipe\n",
- dev->devnum, fmt->iface, fmt->altsetting);
+ (!is_playback && ep != (unsigned int)(get_endpoint(alts, 0)->bSynchAddress & ~USB_DIR_IN)))) {
+ snd_printk(KERN_ERR "%d:%d:%d : invalid sync pipe. is_playback %d, ep %02x, bSynchAddress %02x\n",
+ dev->devnum, fmt->iface, fmt->altsetting,
+ is_playback, ep, get_endpoint(alts, 0)->bSynchAddress);
return -EINVAL;
}
return -EINVAL;
}
-int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream, int cmd)
+static int snd_usb_substream_capture_trigger(struct snd_pcm_substream *substream,
+ int cmd)
{
int err;
struct snd_usb_substream *subs = substream->runtime->private_data;
pfd.fd = fd;
while (1) {
+ struct sockaddr *addr_p = (struct sockaddr *) &addr;
+ socklen_t addr_l = sizeof(addr);
pfd.events = POLLIN;
pfd.revents = 0;
poll(&pfd, 1, -1);
- len = recv(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0);
+ len = recvfrom(fd, kvp_recv_buffer, sizeof(kvp_recv_buffer), 0,
+ addr_p, &addr_l);
- if (len < 0) {
- syslog(LOG_ERR, "recv failed; error:%d", len);
+ if (len < 0 || addr.nl_pid) {
+ syslog(LOG_ERR, "recvfrom failed; pid:%u error:%d %s",
+ addr.nl_pid, errno, strerror(errno));
close(fd);
return -1;
}
fprintf(stderr, "cannot use both --output and --log-fd\n");
usage_with_options(stat_usage, options);
}
+
+ if (output_fd < 0) {
+ fprintf(stderr, "argument to --log-fd must be a > 0\n");
+ usage_with_options(stat_usage, options);
+ }
+
if (!output) {
struct timespec tm;
mode = append_file ? "a" : "w";
}
clock_gettime(CLOCK_REALTIME, &tm);
fprintf(output, "# started on %s\n", ctime(&tm.tv_sec));
- } else if (output_fd != 2) {
+ } else if (output_fd > 0) {
mode = append_file ? "a" : "w";
output = fdopen(output_fd, mode);
if (!output) {
else
return -1;
} else if (ph->needs_swap) {
- unsigned int i;
/*
* feature bitmap is declared as an array of unsigned longs --
* not good since its size can differ between the host that
* file), punt and fallback to the original behavior --
* clearing all feature bits and setting buildid.
*/
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i)
- header->adds_features[i] = bswap_64(header->adds_features[i]);
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
- for (i = 0; i < BITS_TO_LONGS(HEADER_FEAT_BITS); ++i) {
- header->adds_features[i] = bswap_64(header->adds_features[i]);
- header->adds_features[i] = bswap_32(header->adds_features[i]);
- }
+ /* unswap as u64 */
+ mem_bswap_64(&header->adds_features,
+ BITS_TO_U64(HEADER_FEAT_BITS));
+
+ /* unswap as u32 */
+ mem_bswap_32(&header->adds_features,
+ BITS_TO_U32(HEADER_FEAT_BITS));
}
if (!test_bit(HEADER_HOSTNAME, header->adds_features)) {
return ret <= 0 ? -1 : 0;
}
+static int perf_evsel__set_tracepoint_name(struct perf_evsel *evsel)
+{
+ struct event_format *event = trace_find_event(evsel->attr.config);
+ char bf[128];
+
+ if (event == NULL)
+ return -1;
+
+ snprintf(bf, sizeof(bf), "%s:%s", event->system, event->name);
+ evsel->name = strdup(bf);
+ if (event->name == NULL)
+ return -1;
+
+ return 0;
+}
+
+static int perf_evlist__set_tracepoint_names(struct perf_evlist *evlist)
+{
+ struct perf_evsel *pos;
+
+ list_for_each_entry(pos, &evlist->entries, node) {
+ if (pos->attr.type == PERF_TYPE_TRACEPOINT &&
+ perf_evsel__set_tracepoint_name(pos))
+ return -1;
+ }
+
+ return 0;
+}
+
int perf_session__read_header(struct perf_session *session, int fd)
{
struct perf_header *header = &session->header;
lseek(fd, header->data_offset, SEEK_SET);
+ if (perf_evlist__set_tracepoint_names(session->evlist))
+ goto out_delete_evlist;
+
header->frozen = 1;
return 0;
out_errno:
#define BITS_PER_LONG __WORDSIZE
#define BITS_PER_BYTE 8
#define BITS_TO_LONGS(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(long))
+#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
+#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
tool->finished_round = process_finished_round_stub;
}
}
+
+void mem_bswap_32(void *src, int byte_size)
+{
+ u32 *m = src;
+ while (byte_size > 0) {
+ *m = bswap_32(*m);
+ byte_size -= sizeof(u32);
+ ++m;
+ }
+}
void mem_bswap_64(void *src, int byte_size)
{
bool perf_session__has_traces(struct perf_session *self, const char *msg);
void mem_bswap_64(void *src, int byte_size);
+void mem_bswap_32(void *src, int byte_size);
void perf_event__attr_swap(struct perf_event_attr *attr);
int perf_session__create_kernel_maps(struct perf_session *self);
int r = 0, idx;
struct kvm_assigned_dev_kernel *match;
struct pci_dev *dev;
- u8 header_type;
if (!(assigned_dev->flags & KVM_DEV_ASSIGN_ENABLE_IOMMU))
return -EINVAL;
}
/* Don't allow bridges to be assigned */
- pci_read_config_byte(dev, PCI_HEADER_TYPE, &header_type);
- if ((header_type & PCI_HEADER_TYPE) != PCI_HEADER_TYPE_NORMAL) {
+ if (dev->hdr_type != PCI_HEADER_TYPE_NORMAL) {
r = -EPERM;
goto out_put;
}
projects / cascardo / linux.git / commitdiff