--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/ieee80211_radiotap.h>
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#define DRV_NAME "iwl3945"
+
+#include "iwl-fh.h"
+#include "iwl-3945-fh.h"
+#include "iwl-commands.h"
+#include "iwl-sta.h"
+#include "iwl-3945.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+#include "iwl-dev.h"
+#include "iwl-spectrum.h"
+
+/*
+ * module name, copyright, version, etc.
+ */
+
+#define DRV_DESCRIPTION \
+"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+/*
+ * add "s" to indicate spectrum measurement included.
+ * we add it here to be consistent with previous releases in which
+ * this was configurable.
+ */
+#define DRV_VERSION IWLWIFI_VERSION VD "s"
+#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
+#define DRV_AUTHOR "<ilw@linux.intel.com>"
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+
+ /* module parameters */
+struct il_mod_params il3945_mod_params = {
+ .sw_crypto = 1,
+ .restart_fw = 1,
+ .disable_hw_scan = 1,
+ /* the rest are 0 by default */
+};
+
+/**
+ * il3945_get_antenna_flags - Get antenna flags for RXON command
+ * @il: eeprom and antenna fields are used to determine antenna flags
+ *
+ * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed
+ * il3945_mod_params.antenna specifies the antenna diversity mode:
+ *
+ * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
+ * IL_ANTENNA_MAIN - Force MAIN antenna
+ * IL_ANTENNA_AUX - Force AUX antenna
+ */
+__le32 il3945_get_antenna_flags(const struct il_priv *il)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+
+ switch (il3945_mod_params.antenna) {
+ case IL_ANTENNA_DIVERSITY:
+ return 0;
+
+ case IL_ANTENNA_MAIN:
+ if (eeprom->antenna_switch_type)
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+
+ case IL_ANTENNA_AUX:
+ if (eeprom->antenna_switch_type)
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
+ return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
+ }
+
+ /* bad antenna selector value */
+ IL_ERR("Bad antenna selector value (0x%x)\n",
+ il3945_mod_params.antenna);
+
+ return 0; /* "diversity" is default if error */
+}
+
+static int il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf,
+ u8 sta_id)
+{
+ unsigned long flags;
+ __le16 key_flags = 0;
+ int ret;
+
+ key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+
+ if (sta_id == il->ctx.bcast_sta_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
+
+ keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
+ keyconf->hw_key_idx = keyconf->keyidx;
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
+ il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
+ memcpy(il->stations[sta_id].keyinfo.key, keyconf->key,
+ keyconf->keylen);
+
+ memcpy(il->stations[sta_id].sta.key.key, keyconf->key,
+ keyconf->keylen);
+
+ if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
+ == STA_KEY_FLG_NO_ENC)
+ il->stations[sta_id].sta.key.key_offset =
+ il_get_free_ucode_key_idx(il);
+ /* else, we are overriding an existing key => no need to allocated room
+ * in uCode. */
+
+ WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
+ "no space for a new key");
+
+ il->stations[sta_id].sta.key.key_flags = key_flags;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+
+ D_INFO("hwcrypto: modify ucode station key info\n");
+
+ ret = il_send_add_sta(il,
+ &il->stations[sta_id].sta, CMD_ASYNC);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return ret;
+}
+
+static int il3945_set_tkip_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf,
+ u8 sta_id)
+{
+ return -EOPNOTSUPP;
+}
+
+static int il3945_set_wep_dynamic_key_info(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf,
+ u8 sta_id)
+{
+ return -EOPNOTSUPP;
+}
+
+static int il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
+{
+ unsigned long flags;
+ struct il_addsta_cmd sta_cmd;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
+ memset(&il->stations[sta_id].sta.key, 0,
+ sizeof(struct il4965_keyinfo));
+ il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
+ il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
+ il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
+ memcpy(&sta_cmd, &il->stations[sta_id].sta, sizeof(struct il_addsta_cmd));
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ D_INFO("hwcrypto: clear ucode station key info\n");
+ return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
+}
+
+static int il3945_set_dynamic_key(struct il_priv *il,
+ struct ieee80211_key_conf *keyconf, u8 sta_id)
+{
+ int ret = 0;
+
+ keyconf->hw_key_idx = HW_KEY_DYNAMIC;
+
+ switch (keyconf->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ case WLAN_CIPHER_SUITE_TKIP:
+ ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ case WLAN_CIPHER_SUITE_WEP40:
+ case WLAN_CIPHER_SUITE_WEP104:
+ ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
+ break;
+ default:
+ IL_ERR("Unknown alg: %s alg=%x\n", __func__,
+ keyconf->cipher);
+ ret = -EINVAL;
+ }
+
+ D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
+ keyconf->cipher, keyconf->keylen, keyconf->keyidx,
+ sta_id, ret);
+
+ return ret;
+}
+
+static int il3945_remove_static_key(struct il_priv *il)
+{
+ int ret = -EOPNOTSUPP;
+
+ return ret;
+}
+
+static int il3945_set_static_key(struct il_priv *il,
+ struct ieee80211_key_conf *key)
+{
+ if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104)
+ return -EOPNOTSUPP;
+
+ IL_ERR("Static key invalid: cipher %x\n", key->cipher);
+ return -EINVAL;
+}
+
+static void il3945_clear_free_frames(struct il_priv *il)
+{
+ struct list_head *element;
+
+ D_INFO("%d frames on pre-allocated heap on clear.\n",
+ il->frames_count);
+
+ while (!list_empty(&il->free_frames)) {
+ element = il->free_frames.next;
+ list_del(element);
+ kfree(list_entry(element, struct il3945_frame, list));
+ il->frames_count--;
+ }
+
+ if (il->frames_count) {
+ IL_WARN("%d frames still in use. Did we lose one?\n",
+ il->frames_count);
+ il->frames_count = 0;
+ }
+}
+
+static struct il3945_frame *il3945_get_free_frame(struct il_priv *il)
+{
+ struct il3945_frame *frame;
+ struct list_head *element;
+ if (list_empty(&il->free_frames)) {
+ frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+ if (!frame) {
+ IL_ERR("Could not allocate frame!\n");
+ return NULL;
+ }
+
+ il->frames_count++;
+ return frame;
+ }
+
+ element = il->free_frames.next;
+ list_del(element);
+ return list_entry(element, struct il3945_frame, list);
+}
+
+static void il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
+{
+ memset(frame, 0, sizeof(*frame));
+ list_add(&frame->list, &il->free_frames);
+}
+
+unsigned int il3945_fill_beacon_frame(struct il_priv *il,
+ struct ieee80211_hdr *hdr,
+ int left)
+{
+
+ if (!il_is_associated(il) || !il->beacon_skb)
+ return 0;
+
+ if (il->beacon_skb->len > left)
+ return 0;
+
+ memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
+
+ return il->beacon_skb->len;
+}
+
+static int il3945_send_beacon_cmd(struct il_priv *il)
+{
+ struct il3945_frame *frame;
+ unsigned int frame_size;
+ int rc;
+ u8 rate;
+
+ frame = il3945_get_free_frame(il);
+
+ if (!frame) {
+ IL_ERR("Could not obtain free frame buffer for beacon "
+ "command.\n");
+ return -ENOMEM;
+ }
+
+ rate = il_get_lowest_plcp(il,
+ &il->ctx);
+
+ frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
+
+ rc = il_send_cmd_pdu(il, REPLY_TX_BEACON, frame_size,
+ &frame->u.cmd[0]);
+
+ il3945_free_frame(il, frame);
+
+ return rc;
+}
+
+static void il3945_unset_hw_params(struct il_priv *il)
+{
+ if (il->_3945.shared_virt)
+ dma_free_coherent(&il->pci_dev->dev,
+ sizeof(struct il3945_shared),
+ il->_3945.shared_virt,
+ il->_3945.shared_phys);
+}
+
+static void il3945_build_tx_cmd_hwcrypto(struct il_priv *il,
+ struct ieee80211_tx_info *info,
+ struct il_device_cmd *cmd,
+ struct sk_buff *skb_frag,
+ int sta_id)
+{
+ struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+ struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
+
+ tx_cmd->sec_ctl = 0;
+
+ switch (keyinfo->cipher) {
+ case WLAN_CIPHER_SUITE_CCMP:
+ tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
+ memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
+ D_TX("tx_cmd with AES hwcrypto\n");
+ break;
+
+ case WLAN_CIPHER_SUITE_TKIP:
+ break;
+
+ case WLAN_CIPHER_SUITE_WEP104:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
+ /* fall through */
+ case WLAN_CIPHER_SUITE_WEP40:
+ tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
+ (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
+
+ memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
+
+ D_TX("Configuring packet for WEP encryption "
+ "with key %d\n", info->control.hw_key->hw_key_idx);
+ break;
+
+ default:
+ IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
+ break;
+ }
+}
+
+/*
+ * handle build REPLY_TX command notification.
+ */
+static void il3945_build_tx_cmd_basic(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr, u8 std_id)
+{
+ struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+ __le32 tx_flags = tx_cmd->tx_flags;
+ __le16 fc = hdr->frame_control;
+
+ tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
+ tx_flags |= TX_CMD_FLG_ACK_MSK;
+ if (ieee80211_is_mgmt(fc))
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ if (ieee80211_is_probe_resp(fc) &&
+ !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
+ tx_flags |= TX_CMD_FLG_TSF_MSK;
+ } else {
+ tx_flags &= (~TX_CMD_FLG_ACK_MSK);
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ tx_cmd->sta_id = std_id;
+ if (ieee80211_has_morefrags(fc))
+ tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
+
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tx_cmd->tid_tspec = qc[0] & 0xf;
+ tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
+ } else {
+ tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
+ }
+
+ il_tx_cmd_protection(il, info, fc, &tx_flags);
+
+ tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
+ if (ieee80211_is_mgmt(fc)) {
+ if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
+ else
+ tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
+ } else {
+ tx_cmd->timeout.pm_frame_timeout = 0;
+ }
+
+ tx_cmd->driver_txop = 0;
+ tx_cmd->tx_flags = tx_flags;
+ tx_cmd->next_frame_len = 0;
+}
+
+/*
+ * start REPLY_TX command process
+ */
+static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
+{
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
+ struct il3945_tx_cmd *tx_cmd;
+ struct il_tx_queue *txq = NULL;
+ struct il_queue *q = NULL;
+ struct il_device_cmd *out_cmd;
+ struct il_cmd_meta *out_meta;
+ dma_addr_t phys_addr;
+ dma_addr_t txcmd_phys;
+ int txq_id = skb_get_queue_mapping(skb);
+ u16 len, idx, hdr_len;
+ u8 id;
+ u8 unicast;
+ u8 sta_id;
+ u8 tid = 0;
+ __le16 fc;
+ u8 wait_write_ptr = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&il->lock, flags);
+ if (il_is_rfkill(il)) {
+ D_DROP("Dropping - RF KILL\n");
+ goto drop_unlock;
+ }
+
+ if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) == IL_INVALID_RATE) {
+ IL_ERR("ERROR: No TX rate available.\n");
+ goto drop_unlock;
+ }
+
+ unicast = !is_multicast_ether_addr(hdr->addr1);
+ id = 0;
+
+ fc = hdr->frame_control;
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (ieee80211_is_auth(fc))
+ D_TX("Sending AUTH frame\n");
+ else if (ieee80211_is_assoc_req(fc))
+ D_TX("Sending ASSOC frame\n");
+ else if (ieee80211_is_reassoc_req(fc))
+ D_TX("Sending REASSOC frame\n");
+#endif
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ hdr_len = ieee80211_hdrlen(fc);
+
+ /* Find idx into station table for destination station */
+ sta_id = il_sta_id_or_broadcast(
+ il, &il->ctx,
+ info->control.sta);
+ if (sta_id == IL_INVALID_STATION) {
+ D_DROP("Dropping - INVALID STATION: %pM\n",
+ hdr->addr1);
+ goto drop;
+ }
+
+ D_RATE("station Id %d\n", sta_id);
+
+ if (ieee80211_is_data_qos(fc)) {
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
+ if (unlikely(tid >= MAX_TID_COUNT))
+ goto drop;
+ }
+
+ /* Descriptor for chosen Tx queue */
+ txq = &il->txq[txq_id];
+ q = &txq->q;
+
+ if ((il_queue_space(q) < q->high_mark))
+ goto drop;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ idx = il_get_cmd_idx(q, q->write_ptr, 0);
+
+ /* Set up driver data for this TFD */
+ memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct il_tx_info));
+ txq->txb[q->write_ptr].skb = skb;
+ txq->txb[q->write_ptr].ctx = &il->ctx;
+
+ /* Init first empty entry in queue's array of Tx/cmd buffers */
+ out_cmd = txq->cmd[idx];
+ out_meta = &txq->meta[idx];
+ tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
+ memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
+ memset(tx_cmd, 0, sizeof(*tx_cmd));
+
+ /*
+ * Set up the Tx-command (not MAC!) header.
+ * Store the chosen Tx queue and TFD idx within the sequence field;
+ * after Tx, uCode's Tx response will return this value so driver can
+ * locate the frame within the tx queue and do post-tx processing.
+ */
+ out_cmd->hdr.cmd = REPLY_TX;
+ out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
+ IDX_TO_SEQ(q->write_ptr)));
+
+ /* Copy MAC header from skb into command buffer */
+ memcpy(tx_cmd->hdr, hdr, hdr_len);
+
+
+ if (info->control.hw_key)
+ il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
+
+ /* TODO need this for burst mode later on */
+ il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
+
+ /* set is_hcca to 0; it probably will never be implemented */
+ il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id, 0);
+
+ /* Total # bytes to be transmitted */
+ len = (u16)skb->len;
+ tx_cmd->len = cpu_to_le16(len);
+
+ il_dbg_log_tx_data_frame(il, len, hdr);
+ il_update_stats(il, true, fc, len);
+ tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
+ tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
+
+ if (!ieee80211_has_morefrags(hdr->frame_control)) {
+ txq->need_update = 1;
+ } else {
+ wait_write_ptr = 1;
+ txq->need_update = 0;
+ }
+
+ D_TX("sequence nr = 0X%x\n",
+ le16_to_cpu(out_cmd->hdr.sequence));
+ D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
+ il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
+ il_print_hex_dump(il, IL_DL_TX, (u8 *)tx_cmd->hdr,
+ ieee80211_hdrlen(fc));
+
+ /*
+ * Use the first empty entry in this queue's command buffer array
+ * to contain the Tx command and MAC header concatenated together
+ * (payload data will be in another buffer).
+ * Size of this varies, due to varying MAC header length.
+ * If end is not dword aligned, we'll have 2 extra bytes at the end
+ * of the MAC header (device reads on dword boundaries).
+ * We'll tell device about this padding later.
+ */
+ len = sizeof(struct il3945_tx_cmd) +
+ sizeof(struct il_cmd_header) + hdr_len;
+ len = (len + 3) & ~3;
+
+ /* Physical address of this Tx command's header (not MAC header!),
+ * within command buffer array. */
+ txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr,
+ len, PCI_DMA_TODEVICE);
+ /* we do not map meta data ... so we can safely access address to
+ * provide to unmap command*/
+ dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
+ dma_unmap_len_set(out_meta, len, len);
+
+ /* Add buffer containing Tx command and MAC(!) header to TFD's
+ * first entry */
+ il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
+ txcmd_phys, len, 1, 0);
+
+
+ /* Set up TFD's 2nd entry to point directly to remainder of skb,
+ * if any (802.11 null frames have no payload). */
+ len = skb->len - hdr_len;
+ if (len) {
+ phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len,
+ len, PCI_DMA_TODEVICE);
+ il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
+ phys_addr, len,
+ 0, U32_PAD(len));
+ }
+
+
+ /* Tell device the write idx *just past* this latest filled TFD */
+ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
+ il_txq_update_write_ptr(il, txq);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ if (il_queue_space(q) < q->high_mark
+ && il->mac80211_registered) {
+ if (wait_write_ptr) {
+ spin_lock_irqsave(&il->lock, flags);
+ txq->need_update = 1;
+ il_txq_update_write_ptr(il, txq);
+ spin_unlock_irqrestore(&il->lock, flags);
+ }
+
+ il_stop_queue(il, txq);
+ }
+
+ return 0;
+
+drop_unlock:
+ spin_unlock_irqrestore(&il->lock, flags);
+drop:
+ return -1;
+}
+
+static int il3945_get_measurement(struct il_priv *il,
+ struct ieee80211_measurement_params *params,
+ u8 type)
+{
+ struct il_spectrum_cmd spectrum;
+ struct il_rx_pkt *pkt;
+ struct il_host_cmd cmd = {
+ .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
+ .data = (void *)&spectrum,
+ .flags = CMD_WANT_SKB,
+ };
+ u32 add_time = le64_to_cpu(params->start_time);
+ int rc;
+ int spectrum_resp_status;
+ int duration = le16_to_cpu(params->duration);
+ struct il_rxon_context *ctx = &il->ctx;
+
+ if (il_is_associated(il))
+ add_time = il_usecs_to_beacons(il,
+ le64_to_cpu(params->start_time) - il->_3945.last_tsf,
+ le16_to_cpu(ctx->timing.beacon_interval));
+
+ memset(&spectrum, 0, sizeof(spectrum));
+
+ spectrum.channel_count = cpu_to_le16(1);
+ spectrum.flags =
+ RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
+ spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
+ cmd.len = sizeof(spectrum);
+ spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
+
+ if (il_is_associated(il))
+ spectrum.start_time =
+ il_add_beacon_time(il,
+ il->_3945.last_beacon_time, add_time,
+ le16_to_cpu(ctx->timing.beacon_interval));
+ else
+ spectrum.start_time = 0;
+
+ spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
+ spectrum.channels[0].channel = params->channel;
+ spectrum.channels[0].type = type;
+ if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
+ spectrum.flags |= RXON_FLG_BAND_24G_MSK |
+ RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
+
+ rc = il_send_cmd_sync(il, &cmd);
+ if (rc)
+ return rc;
+
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from REPLY_RX_ON_ASSOC command\n");
+ rc = -EIO;
+ }
+
+ spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
+ switch (spectrum_resp_status) {
+ case 0: /* Command will be handled */
+ if (pkt->u.spectrum.id != 0xff) {
+ D_INFO("Replaced existing measurement: %d\n",
+ pkt->u.spectrum.id);
+ il->measurement_status &= ~MEASUREMENT_READY;
+ }
+ il->measurement_status |= MEASUREMENT_ACTIVE;
+ rc = 0;
+ break;
+
+ case 1: /* Command will not be handled */
+ rc = -EAGAIN;
+ break;
+ }
+
+ il_free_pages(il, cmd.reply_page);
+
+ return rc;
+}
+
+static void il3945_rx_reply_alive(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_alive_resp *palive;
+ struct delayed_work *pwork;
+
+ palive = &pkt->u.alive_frame;
+
+ D_INFO("Alive ucode status 0x%08X revision "
+ "0x%01X 0x%01X\n",
+ palive->is_valid, palive->ver_type,
+ palive->ver_subtype);
+
+ if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+ D_INFO("Initialization Alive received.\n");
+ memcpy(&il->card_alive_init, &pkt->u.alive_frame,
+ sizeof(struct il_alive_resp));
+ pwork = &il->init_alive_start;
+ } else {
+ D_INFO("Runtime Alive received.\n");
+ memcpy(&il->card_alive, &pkt->u.alive_frame,
+ sizeof(struct il_alive_resp));
+ pwork = &il->alive_start;
+ il3945_disable_events(il);
+ }
+
+ /* We delay the ALIVE response by 5ms to
+ * give the HW RF Kill time to activate... */
+ if (palive->is_valid == UCODE_VALID_OK)
+ queue_delayed_work(il->workqueue, pwork,
+ msecs_to_jiffies(5));
+ else
+ IL_WARN("uCode did not respond OK.\n");
+}
+
+static void il3945_rx_reply_add_sta(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+#ifdef CONFIG_IWLEGACY_DEBUG
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+#endif
+
+ D_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
+}
+
+static void il3945_rx_beacon_notif(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u8 rate = beacon->beacon_notify_hdr.rate;
+
+ D_RX("beacon status %x retries %d iss %d "
+ "tsf %d %d rate %d\n",
+ le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
+ beacon->beacon_notify_hdr.failure_frame,
+ le32_to_cpu(beacon->ibss_mgr_status),
+ le32_to_cpu(beacon->high_tsf),
+ le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+ il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void il3945_rx_card_state_notif(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+ unsigned long status = il->status;
+
+ IL_WARN("Card state received: HW:%s SW:%s\n",
+ (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+ (flags & SW_CARD_DISABLED) ? "Kill" : "On");
+
+ _il_wr(il, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ if (flags & HW_CARD_DISABLED)
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+
+
+ il_scan_cancel(il);
+
+ if ((test_bit(STATUS_RF_KILL_HW, &status) !=
+ test_bit(STATUS_RF_KILL_HW, &il->status)))
+ wiphy_rfkill_set_hw_state(il->hw->wiphy,
+ test_bit(STATUS_RF_KILL_HW, &il->status));
+ else
+ wake_up(&il->wait_command_queue);
+}
+
+/**
+ * il3945_setup_rx_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void il3945_setup_rx_handlers(struct il_priv *il)
+{
+ il->rx_handlers[REPLY_ALIVE] = il3945_rx_reply_alive;
+ il->rx_handlers[REPLY_ADD_STA] = il3945_rx_reply_add_sta;
+ il->rx_handlers[REPLY_ERROR] = il_rx_reply_error;
+ il->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = il_rx_csa;
+ il->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+ il_rx_spectrum_measure_notif;
+ il->rx_handlers[PM_SLEEP_NOTIFICATION] = il_rx_pm_sleep_notif;
+ il->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
+ il_rx_pm_debug_stats_notif;
+ il->rx_handlers[BEACON_NOTIFICATION] = il3945_rx_beacon_notif;
+
+ /*
+ * The same handler is used for both the REPLY to a discrete
+ * stats request from the host as well as for the periodic
+ * stats notifications (after received beacons) from the uCode.
+ */
+ il->rx_handlers[REPLY_STATISTICS_CMD] = il3945_reply_stats;
+ il->rx_handlers[STATISTICS_NOTIFICATION] = il3945_hw_rx_stats;
+
+ il_setup_rx_scan_handlers(il);
+ il->rx_handlers[CARD_STATE_NOTIFICATION] = il3945_rx_card_state_notif;
+
+ /* Set up hardware specific Rx handlers */
+ il3945_hw_rx_handler_setup(il);
+}
+
+/************************** RX-FUNCTIONS ****************************/
+/*
+ * Rx theory of operation
+ *
+ * The host allocates 32 DMA target addresses and passes the host address
+ * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
+ * 0 to 31
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two idx registers for managing the Rx buffers.
+ *
+ * The READ idx maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ idx is managed by the firmware once the card is enabled.
+ *
+ * The WRITE idx maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * IDX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ idx
+ * and fire the RX interrupt. The driver can then query the READ idx and
+ * process as many packets as possible, moving the WRITE idx forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
+ * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replenish the iwl->rxq->rx_free.
+ * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
+ * iwl->rxq is replenished and the READ IDX is updated (updating the
+ * 'processed' and 'read' driver idxes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the iwl->rxq. The driver 'processed' idx is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
+ * il3945_rx_queue_restock
+ * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE idx. If insufficient rx_free buffers
+ * are available, schedules il3945_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - il3945_rx() Detach il_rx_bufs from pool up to the
+ * READ IDX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls il3945_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/**
+ * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 il3945_dma_addr2rbd_ptr(struct il_priv *il,
+ dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)dma_addr);
+}
+
+/**
+ * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' idx forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void il3945_rx_queue_restock(struct il_priv *il)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ unsigned long flags;
+ int write;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ write = rxq->write & ~0x7;
+ while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(il->workqueue, &il->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7) ||
+ abs(rxq->write - rxq->read) > 7) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ il_rx_queue_update_write_ptr(il, rxq);
+ }
+}
+
+/**
+ * il3945_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via il3945_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void il3945_rx_allocate(struct il_priv *il, gfp_t priority)
+{
+ struct il_rx_queue *rxq = &il->rxq;
+ struct list_head *element;
+ struct il_rx_buf *rxb;
+ struct page *page;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (il->hw_params.rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ D_INFO("Failed to allocate SKB buffer.\n");
+ if (rxq->free_count <= RX_LOW_WATERMARK &&
+ net_ratelimit())
+ IL_ERR("Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ break;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, il->hw_params.rx_page_order);
+ return;
+ }
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct il_rx_buf, list);
+ list_del(element);
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ rxb->page = page;
+ /* Get physical address of RB/SKB */
+ rxb->page_dma = pci_map_page(il->pci_dev, page, 0,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ il->alloc_rxb_page++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ unsigned long flags;
+ int i;
+ spin_lock_irqsave(&rxq->lock, flags);
+ INIT_LIST_HEAD(&rxq->rx_free);
+ INIT_LIST_HEAD(&rxq->rx_used);
+ /* Fill the rx_used queue with _all_ of the Rx buffers */
+ for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
+ /* In the reset function, these buffers may have been allocated
+ * to an SKB, so we need to unmap and free potential storage */
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
+ }
+
+ /* Set us so that we have processed and used all buffers, but have
+ * not restocked the Rx queue with fresh buffers */
+ rxq->read = rxq->write = 0;
+ rxq->write_actual = 0;
+ rxq->free_count = 0;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+}
+
+void il3945_rx_replenish(void *data)
+{
+ struct il_priv *il = data;
+ unsigned long flags;
+
+ il3945_rx_allocate(il, GFP_KERNEL);
+
+ spin_lock_irqsave(&il->lock, flags);
+ il3945_rx_queue_restock(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+}
+
+static void il3945_rx_replenish_now(struct il_priv *il)
+{
+ il3945_rx_allocate(il, GFP_ATOMIC);
+
+ il3945_rx_queue_restock(il);
+}
+
+
+/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
+ * If an SKB has been detached, the POOL needs to have its SKB set to NULL
+ * This free routine walks the list of POOL entries and if SKB is set to
+ * non NULL it is unmapped and freed
+ */
+static void il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ int i;
+ for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
+ if (rxq->pool[i].page != NULL) {
+ pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ __il_free_pages(il, rxq->pool[i].page);
+ rxq->pool[i].page = NULL;
+ }
+ }
+
+ dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
+ rxq->bd_dma);
+ dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
+ rxq->rb_stts, rxq->rb_stts_dma);
+ rxq->bd = NULL;
+ rxq->rb_stts = NULL;
+}
+
+
+/* Convert linear signal-to-noise ratio into dB */
+static u8 ratio2dB[100] = {
+/* 0 1 2 3 4 5 6 7 8 9 */
+ 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
+ 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
+ 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
+ 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
+ 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
+ 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
+ 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
+ 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
+ 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
+ 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
+};
+
+/* Calculates a relative dB value from a ratio of linear
+ * (i.e. not dB) signal levels.
+ * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
+int il3945_calc_db_from_ratio(int sig_ratio)
+{
+ /* 1000:1 or higher just report as 60 dB */
+ if (sig_ratio >= 1000)
+ return 60;
+
+ /* 100:1 or higher, divide by 10 and use table,
+ * add 20 dB to make up for divide by 10 */
+ if (sig_ratio >= 100)
+ return 20 + (int)ratio2dB[sig_ratio/10];
+
+ /* We shouldn't see this */
+ if (sig_ratio < 1)
+ return 0;
+
+ /* Use table for ratios 1:1 - 99:1 */
+ return (int)ratio2dB[sig_ratio];
+}
+
+/**
+ * il3945_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the il->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void il3945_rx_handle(struct il_priv *il)
+{
+ struct il_rx_buf *rxb;
+ struct il_rx_pkt *pkt;
+ struct il_rx_queue *rxq = &il->rxq;
+ u32 r, i;
+ int reclaim;
+ unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ int total_empty = 0;
+
+ /* uCode's read idx (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
+ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+ i = rxq->read;
+
+ /* calculate total frames need to be restock after handling RX */
+ total_empty = r - rxq->write_actual;
+ if (total_empty < 0)
+ total_empty += RX_QUEUE_SIZE;
+
+ if (total_empty > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
+ /* Rx interrupt, but nothing sent from uCode */
+ if (i == r)
+ D_RX("r = %d, i = %d\n", r, i);
+
+ while (i != r) {
+ int len;
+
+ rxb = rxq->queue[i];
+
+ /* If an RXB doesn't have a Rx queue slot associated with it,
+ * then a bug has been introduced in the queue refilling
+ * routines -- catch it here */
+ BUG_ON(rxb == NULL);
+
+ rxq->queue[i] = NULL;
+
+ pci_unmap_page(il->pci_dev, rxb->page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ pkt = rxb_addr(rxb);
+
+ len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ len += sizeof(u32); /* account for status word */
+
+ /* Reclaim a command buffer only if this packet is a response
+ * to a (driver-originated) command.
+ * If the packet (e.g. Rx frame) originated from uCode,
+ * there is no command buffer to reclaim.
+ * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+ * but apparently a few don't get set; catch them here. */
+ reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+ pkt->hdr.cmd != STATISTICS_NOTIFICATION &&
+ pkt->hdr.cmd != REPLY_TX;
+
+ /* Based on type of command response or notification,
+ * handle those that need handling via function in
+ * rx_handlers table. See il3945_setup_rx_handlers() */
+ if (il->rx_handlers[pkt->hdr.cmd]) {
+ D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
+ il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+ il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+ il->rx_handlers[pkt->hdr.cmd] (il, rxb);
+ } else {
+ /* No handling needed */
+ D_RX(
+ "r %d i %d No handler needed for %s, 0x%02x\n",
+ r, i, il_get_cmd_string(pkt->hdr.cmd),
+ pkt->hdr.cmd);
+ }
+
+ /*
+ * XXX: After here, we should always check rxb->page
+ * against NULL before touching it or its virtual
+ * memory (pkt). Because some rx_handler might have
+ * already taken or freed the pages.
+ */
+
+ if (reclaim) {
+ /* Invoke any callbacks, transfer the buffer to caller,
+ * and fire off the (possibly) blocking il_send_cmd()
+ * as we reclaim the driver command queue */
+ if (rxb->page)
+ il_tx_cmd_complete(il, rxb);
+ else
+ IL_WARN("Claim null rxb?\n");
+ }
+
+ /* Reuse the page if possible. For notification packets and
+ * SKBs that fail to Rx correctly, add them back into the
+ * rx_free list for reuse later. */
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (rxb->page != NULL) {
+ rxb->page_dma = pci_map_page(il->pci_dev, rxb->page,
+ 0, PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ } else
+ list_add_tail(&rxb->list, &rxq->rx_used);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode won't assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ rxq->read = i;
+ il3945_rx_replenish_now(il);
+ count = 0;
+ }
+ }
+ }
+
+ /* Backtrack one entry */
+ rxq->read = i;
+ if (fill_rx)
+ il3945_rx_replenish_now(il);
+ else
+ il3945_rx_queue_restock(il);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void il3945_synchronize_irq(struct il_priv *il)
+{
+ /* wait to make sure we flush pending tasklet*/
+ synchronize_irq(il->pci_dev->irq);
+ tasklet_kill(&il->irq_tasklet);
+}
+
+static const char *il3945_desc_lookup(int i)
+{
+ switch (i) {
+ case 1:
+ return "FAIL";
+ case 2:
+ return "BAD_PARAM";
+ case 3:
+ return "BAD_CHECKSUM";
+ case 4:
+ return "NMI_INTERRUPT";
+ case 5:
+ return "SYSASSERT";
+ case 6:
+ return "FATAL_ERROR";
+ }
+
+ return "UNKNOWN";
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+void il3945_dump_nic_error_log(struct il_priv *il)
+{
+ u32 i;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+
+ base = le32_to_cpu(il->card_alive.error_event_table_ptr);
+
+ if (!il3945_hw_valid_rtc_data_addr(base)) {
+ IL_ERR("Not valid error log pointer 0x%08X\n", base);
+ return;
+ }
+
+
+ count = il_read_targ_mem(il, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IL_ERR("Start IWL Error Log Dump:\n");
+ IL_ERR("Status: 0x%08lX, count: %d\n",
+ il->status, count);
+ }
+
+ IL_ERR("Desc Time asrtPC blink2 "
+ "ilink1 nmiPC Line\n");
+ for (i = ERROR_START_OFFSET;
+ i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
+ i += ERROR_ELEM_SIZE) {
+ desc = il_read_targ_mem(il, base + i);
+ time =
+ il_read_targ_mem(il, base + i + 1 * sizeof(u32));
+ blink1 =
+ il_read_targ_mem(il, base + i + 2 * sizeof(u32));
+ blink2 =
+ il_read_targ_mem(il, base + i + 3 * sizeof(u32));
+ ilink1 =
+ il_read_targ_mem(il, base + i + 4 * sizeof(u32));
+ ilink2 =
+ il_read_targ_mem(il, base + i + 5 * sizeof(u32));
+ data1 =
+ il_read_targ_mem(il, base + i + 6 * sizeof(u32));
+
+ IL_ERR(
+ "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
+ il3945_desc_lookup(desc), desc, time, blink1, blink2,
+ ilink1, ilink2, data1);
+ }
+}
+
+static void il3945_irq_tasklet(struct il_priv *il)
+{
+ u32 inta, handled = 0;
+ u32 inta_fh;
+ unsigned long flags;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u32 inta_mask;
+#endif
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ * and will clear only when CSR_FH_INT_STATUS gets cleared. */
+ inta = _il_rd(il, CSR_INT);
+ _il_wr(il, CSR_INT, inta);
+
+ /* Ack/clear/reset pending flow-handler (DMA) interrupts.
+ * Any new interrupts that happen after this, either while we're
+ * in this tasklet, or later, will show up in next ISR/tasklet. */
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & IL_DL_ISR) {
+ /* just for debug */
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+ inta, inta_mask, inta_fh);
+ }
+#endif
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+ * atomic, make sure that inta covers all the interrupts that
+ * we've discovered, even if FH interrupt came in just after
+ * reading CSR_INT. */
+ if (inta_fh & CSR39_FH_INT_RX_MASK)
+ inta |= CSR_INT_BIT_FH_RX;
+ if (inta_fh & CSR39_FH_INT_TX_MASK)
+ inta |= CSR_INT_BIT_FH_TX;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IL_ERR("Hardware error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ il_disable_interrupts(il);
+
+ il->isr_stats.hw++;
+ il_irq_handle_error(il);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ return;
+ }
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ D_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
+ il->isr_stats.sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ D_ISR("Alive interrupt\n");
+ il->isr_stats.alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IL_ERR("Microcode SW error detected. "
+ "Restarting 0x%X.\n", inta);
+ il->isr_stats.sw++;
+ il_irq_handle_error(il);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /* uCode wakes up after power-down sleep */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ D_ISR("Wakeup interrupt\n");
+ il_rx_queue_update_write_ptr(il, &il->rxq);
+ il_txq_update_write_ptr(il, &il->txq[0]);
+ il_txq_update_write_ptr(il, &il->txq[1]);
+ il_txq_update_write_ptr(il, &il->txq[2]);
+ il_txq_update_write_ptr(il, &il->txq[3]);
+ il_txq_update_write_ptr(il, &il->txq[4]);
+ il_txq_update_write_ptr(il, &il->txq[5]);
+
+ il->isr_stats.wakeup++;
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ il3945_rx_handle(il);
+ il->isr_stats.rx++;
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ }
+
+ if (inta & CSR_INT_BIT_FH_TX) {
+ D_ISR("Tx interrupt\n");
+ il->isr_stats.tx++;
+
+ _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
+ il_wr(il, FH39_TCSR_CREDIT
+ (FH39_SRVC_CHNL), 0x0);
+ handled |= CSR_INT_BIT_FH_TX;
+ }
+
+ if (inta & ~handled) {
+ IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ il->isr_stats.unhandled++;
+ }
+
+ if (inta & ~il->inta_mask) {
+ IL_WARN("Disabled INTA bits 0x%08x were pending\n",
+ inta & ~il->inta_mask);
+ IL_WARN(" with FH_INT = 0x%08x\n", inta_fh);
+ }
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &il->status))
+ il_enable_interrupts(il);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ inta = _il_rd(il, CSR_INT);
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+ "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+ }
+#endif
+}
+
+static int il3945_get_channels_for_scan(struct il_priv *il,
+ enum ieee80211_band band,
+ u8 is_active, u8 n_probes,
+ struct il3945_scan_channel *scan_ch,
+ struct ieee80211_vif *vif)
+{
+ struct ieee80211_channel *chan;
+ const struct ieee80211_supported_band *sband;
+ const struct il_channel_info *ch_info;
+ u16 passive_dwell = 0;
+ u16 active_dwell = 0;
+ int added, i;
+
+ sband = il_get_hw_mode(il, band);
+ if (!sband)
+ return 0;
+
+ active_dwell = il_get_active_dwell_time(il, band, n_probes);
+ passive_dwell = il_get_passive_dwell_time(il, band, vif);
+
+ if (passive_dwell <= active_dwell)
+ passive_dwell = active_dwell + 1;
+
+ for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
+ chan = il->scan_request->channels[i];
+
+ if (chan->band != band)
+ continue;
+
+ scan_ch->channel = chan->hw_value;
+
+ ch_info = il_get_channel_info(il, band,
+ scan_ch->channel);
+ if (!il_is_channel_valid(ch_info)) {
+ D_SCAN(
+ "Channel %d is INVALID for this band.\n",
+ scan_ch->channel);
+ continue;
+ }
+
+ scan_ch->active_dwell = cpu_to_le16(active_dwell);
+ scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
+ /* If passive , set up for auto-switch
+ * and use long active_dwell time.
+ */
+ if (!is_active || il_is_channel_passive(ch_info) ||
+ (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
+ scan_ch->type = 0; /* passive */
+ if (IL_UCODE_API(il->ucode_ver) == 1)
+ scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
+ } else {
+ scan_ch->type = 1; /* active */
+ }
+
+ /* Set direct probe bits. These may be used both for active
+ * scan channels (probes gets sent right away),
+ * or for passive channels (probes get se sent only after
+ * hearing clear Rx packet).*/
+ if (IL_UCODE_API(il->ucode_ver) >= 2) {
+ if (n_probes)
+ scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
+ } else {
+ /* uCode v1 does not allow setting direct probe bits on
+ * passive channel. */
+ if ((scan_ch->type & 1) && n_probes)
+ scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
+ }
+
+ /* Set txpower levels to defaults */
+ scan_ch->tpc.dsp_atten = 110;
+ /* scan_pwr_info->tpc.dsp_atten; */
+
+ /*scan_pwr_info->tpc.tx_gain; */
+ if (band == IEEE80211_BAND_5GHZ)
+ scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
+ else {
+ scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
+ /* NOTE: if we were doing 6Mb OFDM for scans we'd use
+ * power level:
+ * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
+ */
+ }
+
+ D_SCAN("Scanning %d [%s %d]\n",
+ scan_ch->channel,
+ (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
+ (scan_ch->type & 1) ?
+ active_dwell : passive_dwell);
+
+ scan_ch++;
+ added++;
+ }
+
+ D_SCAN("total channels to scan %d\n", added);
+ return added;
+}
+
+static void il3945_init_hw_rates(struct il_priv *il,
+ struct ieee80211_rate *rates)
+{
+ int i;
+
+ for (i = 0; i < RATE_COUNT_LEGACY; i++) {
+ rates[i].bitrate = il3945_rates[i].ieee * 5;
+ rates[i].hw_value = i; /* Rate scaling will work on idxes */
+ rates[i].hw_value_short = i;
+ rates[i].flags = 0;
+ if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
+ /*
+ * If CCK != 1M then set short preamble rate flag.
+ */
+ rates[i].flags |= (il3945_rates[i].plcp == 10) ?
+ 0 : IEEE80211_RATE_SHORT_PREAMBLE;
+ }
+ }
+}
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void il3945_dealloc_ucode_pci(struct il_priv *il)
+{
+ il_free_fw_desc(il->pci_dev, &il->ucode_code);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_boot);
+}
+
+/**
+ * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
+ * looking at all data.
+ */
+static int il3945_verify_inst_full(struct il_priv *il, __le32 *image, u32 len)
+{
+ u32 val;
+ u32 save_len = len;
+ int rc = 0;
+ u32 errcnt;
+
+ D_INFO("ucode inst image size is %u\n", len);
+
+ il_wr(il, HBUS_TARG_MEM_RADDR,
+ IL39_RTC_INST_LOWER_BOUND);
+
+ errcnt = 0;
+ for (; len > 0; len -= sizeof(u32), image++) {
+ /* read data comes through single port, auto-incr addr */
+ /* NOTE: Use the debugless read so we don't flood kernel log
+ * if IL_DL_IO is set */
+ val = _il_rd(il, HBUS_TARG_MEM_RDAT);
+ if (val != le32_to_cpu(*image)) {
+ IL_ERR("uCode INST section is invalid at "
+ "offset 0x%x, is 0x%x, s/b 0x%x\n",
+ save_len - len, val, le32_to_cpu(*image));
+ rc = -EIO;
+ errcnt++;
+ if (errcnt >= 20)
+ break;
+ }
+ }
+
+
+ if (!errcnt)
+ D_INFO(
+ "ucode image in INSTRUCTION memory is good\n");
+
+ return rc;
+}
+
+
+/**
+ * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
+ * using sample data 100 bytes apart. If these sample points are good,
+ * it's a pretty good bet that everything between them is good, too.
+ */
+static int il3945_verify_inst_sparse(struct il_priv *il, __le32 *image, u32 len)
+{
+ u32 val;
+ int rc = 0;
+ u32 errcnt = 0;
+ u32 i;
+
+ D_INFO("ucode inst image size is %u\n", len);
+
+ for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
+ /* read data comes through single port, auto-incr addr */
+ /* NOTE: Use the debugless read so we don't flood kernel log
+ * if IL_DL_IO is set */
+ il_wr(il, HBUS_TARG_MEM_RADDR,
+ i + IL39_RTC_INST_LOWER_BOUND);
+ val = _il_rd(il, HBUS_TARG_MEM_RDAT);
+ if (val != le32_to_cpu(*image)) {
+#if 0 /* Enable this if you want to see details */
+ IL_ERR("uCode INST section is invalid at "
+ "offset 0x%x, is 0x%x, s/b 0x%x\n",
+ i, val, *image);
+#endif
+ rc = -EIO;
+ errcnt++;
+ if (errcnt >= 3)
+ break;
+ }
+ }
+
+ return rc;
+}
+
+
+/**
+ * il3945_verify_ucode - determine which instruction image is in SRAM,
+ * and verify its contents
+ */
+static int il3945_verify_ucode(struct il_priv *il)
+{
+ __le32 *image;
+ u32 len;
+ int rc = 0;
+
+ /* Try bootstrap */
+ image = (__le32 *)il->ucode_boot.v_addr;
+ len = il->ucode_boot.len;
+ rc = il3945_verify_inst_sparse(il, image, len);
+ if (rc == 0) {
+ D_INFO("Bootstrap uCode is good in inst SRAM\n");
+ return 0;
+ }
+
+ /* Try initialize */
+ image = (__le32 *)il->ucode_init.v_addr;
+ len = il->ucode_init.len;
+ rc = il3945_verify_inst_sparse(il, image, len);
+ if (rc == 0) {
+ D_INFO("Initialize uCode is good in inst SRAM\n");
+ return 0;
+ }
+
+ /* Try runtime/protocol */
+ image = (__le32 *)il->ucode_code.v_addr;
+ len = il->ucode_code.len;
+ rc = il3945_verify_inst_sparse(il, image, len);
+ if (rc == 0) {
+ D_INFO("Runtime uCode is good in inst SRAM\n");
+ return 0;
+ }
+
+ IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
+
+ /* Since nothing seems to match, show first several data entries in
+ * instruction SRAM, so maybe visual inspection will give a clue.
+ * Selection of bootstrap image (vs. other images) is arbitrary. */
+ image = (__le32 *)il->ucode_boot.v_addr;
+ len = il->ucode_boot.len;
+ rc = il3945_verify_inst_full(il, image, len);
+
+ return rc;
+}
+
+static void il3945_nic_start(struct il_priv *il)
+{
+ /* Remove all resets to allow NIC to operate */
+ _il_wr(il, CSR_RESET, 0);
+}
+
+#define IL3945_UCODE_GET(item) \
+static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
+{ \
+ return le32_to_cpu(ucode->v1.item); \
+}
+
+static u32 il3945_ucode_get_header_size(u32 api_ver)
+{
+ return 24;
+}
+
+static u8 *il3945_ucode_get_data(const struct il_ucode_header *ucode)
+{
+ return (u8 *) ucode->v1.data;
+}
+
+IL3945_UCODE_GET(inst_size);
+IL3945_UCODE_GET(data_size);
+IL3945_UCODE_GET(init_size);
+IL3945_UCODE_GET(init_data_size);
+IL3945_UCODE_GET(boot_size);
+
+/**
+ * il3945_read_ucode - Read uCode images from disk file.
+ *
+ * Copy into buffers for card to fetch via bus-mastering
+ */
+static int il3945_read_ucode(struct il_priv *il)
+{
+ const struct il_ucode_header *ucode;
+ int ret = -EINVAL, idx;
+ const struct firmware *ucode_raw;
+ /* firmware file name contains uCode/driver compatibility version */
+ const char *name_pre = il->cfg->fw_name_pre;
+ const unsigned int api_max = il->cfg->ucode_api_max;
+ const unsigned int api_min = il->cfg->ucode_api_min;
+ char buf[25];
+ u8 *src;
+ size_t len;
+ u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
+
+ /* Ask kernel firmware_class module to get the boot firmware off disk.
+ * request_firmware() is synchronous, file is in memory on return. */
+ for (idx = api_max; idx >= api_min; idx--) {
+ sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
+ ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
+ if (ret < 0) {
+ IL_ERR("%s firmware file req failed: %d\n",
+ buf, ret);
+ if (ret == -ENOENT)
+ continue;
+ else
+ goto error;
+ } else {
+ if (idx < api_max)
+ IL_ERR("Loaded firmware %s, "
+ "which is deprecated. "
+ " Please use API v%u instead.\n",
+ buf, api_max);
+ D_INFO("Got firmware '%s' file "
+ "(%zd bytes) from disk\n",
+ buf, ucode_raw->size);
+ break;
+ }
+ }
+
+ if (ret < 0)
+ goto error;
+
+ /* Make sure that we got at least our header! */
+ if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
+ IL_ERR("File size way too small!\n");
+ ret = -EINVAL;
+ goto err_release;
+ }
+
+ /* Data from ucode file: header followed by uCode images */
+ ucode = (struct il_ucode_header *)ucode_raw->data;
+
+ il->ucode_ver = le32_to_cpu(ucode->ver);
+ api_ver = IL_UCODE_API(il->ucode_ver);
+ inst_size = il3945_ucode_get_inst_size(ucode);
+ data_size = il3945_ucode_get_data_size(ucode);
+ init_size = il3945_ucode_get_init_size(ucode);
+ init_data_size = il3945_ucode_get_init_data_size(ucode);
+ boot_size = il3945_ucode_get_boot_size(ucode);
+ src = il3945_ucode_get_data(ucode);
+
+ /* api_ver should match the api version forming part of the
+ * firmware filename ... but we don't check for that and only rely
+ * on the API version read from firmware header from here on forward */
+
+ if (api_ver < api_min || api_ver > api_max) {
+ IL_ERR("Driver unable to support your firmware API. "
+ "Driver supports v%u, firmware is v%u.\n",
+ api_max, api_ver);
+ il->ucode_ver = 0;
+ ret = -EINVAL;
+ goto err_release;
+ }
+ if (api_ver != api_max)
+ IL_ERR("Firmware has old API version. Expected %u, "
+ "got %u. New firmware can be obtained "
+ "from http://www.intellinuxwireless.org.\n",
+ api_max, api_ver);
+
+ IL_INFO("loaded firmware version %u.%u.%u.%u\n",
+ IL_UCODE_MAJOR(il->ucode_ver),
+ IL_UCODE_MINOR(il->ucode_ver),
+ IL_UCODE_API(il->ucode_ver),
+ IL_UCODE_SERIAL(il->ucode_ver));
+
+ snprintf(il->hw->wiphy->fw_version,
+ sizeof(il->hw->wiphy->fw_version),
+ "%u.%u.%u.%u",
+ IL_UCODE_MAJOR(il->ucode_ver),
+ IL_UCODE_MINOR(il->ucode_ver),
+ IL_UCODE_API(il->ucode_ver),
+ IL_UCODE_SERIAL(il->ucode_ver));
+
+ D_INFO("f/w package hdr ucode version raw = 0x%x\n",
+ il->ucode_ver);
+ D_INFO("f/w package hdr runtime inst size = %u\n",
+ inst_size);
+ D_INFO("f/w package hdr runtime data size = %u\n",
+ data_size);
+ D_INFO("f/w package hdr init inst size = %u\n",
+ init_size);
+ D_INFO("f/w package hdr init data size = %u\n",
+ init_data_size);
+ D_INFO("f/w package hdr boot inst size = %u\n",
+ boot_size);
+
+
+ /* Verify size of file vs. image size info in file's header */
+ if (ucode_raw->size != il3945_ucode_get_header_size(api_ver) +
+ inst_size + data_size + init_size +
+ init_data_size + boot_size) {
+
+ D_INFO(
+ "uCode file size %zd does not match expected size\n",
+ ucode_raw->size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+
+ /* Verify that uCode images will fit in card's SRAM */
+ if (inst_size > IL39_MAX_INST_SIZE) {
+ D_INFO("uCode instr len %d too large to fit in\n",
+ inst_size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+
+ if (data_size > IL39_MAX_DATA_SIZE) {
+ D_INFO("uCode data len %d too large to fit in\n",
+ data_size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+ if (init_size > IL39_MAX_INST_SIZE) {
+ D_INFO(
+ "uCode init instr len %d too large to fit in\n",
+ init_size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+ if (init_data_size > IL39_MAX_DATA_SIZE) {
+ D_INFO(
+ "uCode init data len %d too large to fit in\n",
+ init_data_size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+ if (boot_size > IL39_MAX_BSM_SIZE) {
+ D_INFO(
+ "uCode boot instr len %d too large to fit in\n",
+ boot_size);
+ ret = -EINVAL;
+ goto err_release;
+ }
+
+ /* Allocate ucode buffers for card's bus-master loading ... */
+
+ /* Runtime instructions and 2 copies of data:
+ * 1) unmodified from disk
+ * 2) backup cache for save/restore during power-downs */
+ il->ucode_code.len = inst_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
+
+ il->ucode_data.len = data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
+
+ il->ucode_data_backup.len = data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
+
+ if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
+ !il->ucode_data_backup.v_addr)
+ goto err_pci_alloc;
+
+ /* Initialization instructions and data */
+ if (init_size && init_data_size) {
+ il->ucode_init.len = init_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
+
+ il->ucode_init_data.len = init_data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
+
+ if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Bootstrap (instructions only, no data) */
+ if (boot_size) {
+ il->ucode_boot.len = boot_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
+
+ if (!il->ucode_boot.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Copy images into buffers for card's bus-master reads ... */
+
+ /* Runtime instructions (first block of data in file) */
+ len = inst_size;
+ D_INFO(
+ "Copying (but not loading) uCode instr len %zd\n", len);
+ memcpy(il->ucode_code.v_addr, src, len);
+ src += len;
+
+ D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+ il->ucode_code.v_addr, (u32)il->ucode_code.p_addr);
+
+ /* Runtime data (2nd block)
+ * NOTE: Copy into backup buffer will be done in il3945_up() */
+ len = data_size;
+ D_INFO(
+ "Copying (but not loading) uCode data len %zd\n", len);
+ memcpy(il->ucode_data.v_addr, src, len);
+ memcpy(il->ucode_data_backup.v_addr, src, len);
+ src += len;
+
+ /* Initialization instructions (3rd block) */
+ if (init_size) {
+ len = init_size;
+ D_INFO(
+ "Copying (but not loading) init instr len %zd\n", len);
+ memcpy(il->ucode_init.v_addr, src, len);
+ src += len;
+ }
+
+ /* Initialization data (4th block) */
+ if (init_data_size) {
+ len = init_data_size;
+ D_INFO(
+ "Copying (but not loading) init data len %zd\n", len);
+ memcpy(il->ucode_init_data.v_addr, src, len);
+ src += len;
+ }
+
+ /* Bootstrap instructions (5th block) */
+ len = boot_size;
+ D_INFO(
+ "Copying (but not loading) boot instr len %zd\n", len);
+ memcpy(il->ucode_boot.v_addr, src, len);
+
+ /* We have our copies now, allow OS release its copies */
+ release_firmware(ucode_raw);
+ return 0;
+
+ err_pci_alloc:
+ IL_ERR("failed to allocate pci memory\n");
+ ret = -ENOMEM;
+ il3945_dealloc_ucode_pci(il);
+
+ err_release:
+ release_firmware(ucode_raw);
+
+ error:
+ return ret;
+}
+
+
+/**
+ * il3945_set_ucode_ptrs - Set uCode address location
+ *
+ * Tell initialization uCode where to find runtime uCode.
+ *
+ * BSM registers initially contain pointers to initialization uCode.
+ * We need to replace them to load runtime uCode inst and data,
+ * and to save runtime data when powering down.
+ */
+static int il3945_set_ucode_ptrs(struct il_priv *il)
+{
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+
+ /* bits 31:0 for 3945 */
+ pinst = il->ucode_code.p_addr;
+ pdata = il->ucode_data_backup.p_addr;
+
+ /* Tell bootstrap uCode where to find image to load */
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
+ il->ucode_data.len);
+
+ /* Inst byte count must be last to set up, bit 31 signals uCode
+ * that all new ptr/size info is in place */
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
+ il->ucode_code.len | BSM_DRAM_INST_LOAD);
+
+ D_INFO("Runtime uCode pointers are set.\n");
+
+ return 0;
+}
+
+/**
+ * il3945_init_alive_start - Called after REPLY_ALIVE notification received
+ *
+ * Called after REPLY_ALIVE notification received from "initialize" uCode.
+ *
+ * Tell "initialize" uCode to go ahead and load the runtime uCode.
+ */
+static void il3945_init_alive_start(struct il_priv *il)
+{
+ /* Check alive response for "valid" sign from uCode */
+ if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
+ /* We had an error bringing up the hardware, so take it
+ * all the way back down so we can try again */
+ D_INFO("Initialize Alive failed.\n");
+ goto restart;
+ }
+
+ /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
+ * This is a paranoid check, because we would not have gotten the
+ * "initialize" alive if code weren't properly loaded. */
+ if (il3945_verify_ucode(il)) {
+ /* Runtime instruction load was bad;
+ * take it all the way back down so we can try again */
+ D_INFO("Bad \"initialize\" uCode load.\n");
+ goto restart;
+ }
+
+ /* Send pointers to protocol/runtime uCode image ... init code will
+ * load and launch runtime uCode, which will send us another "Alive"
+ * notification. */
+ D_INFO("Initialization Alive received.\n");
+ if (il3945_set_ucode_ptrs(il)) {
+ /* Runtime instruction load won't happen;
+ * take it all the way back down so we can try again */
+ D_INFO("Couldn't set up uCode pointers.\n");
+ goto restart;
+ }
+ return;
+
+ restart:
+ queue_work(il->workqueue, &il->restart);
+}
+
+/**
+ * il3945_alive_start - called after REPLY_ALIVE notification received
+ * from protocol/runtime uCode (initialization uCode's
+ * Alive gets handled by il3945_init_alive_start()).
+ */
+static void il3945_alive_start(struct il_priv *il)
+{
+ int thermal_spin = 0;
+ u32 rfkill;
+ struct il_rxon_context *ctx = &il->ctx;
+
+ D_INFO("Runtime Alive received.\n");
+
+ if (il->card_alive.is_valid != UCODE_VALID_OK) {
+ /* We had an error bringing up the hardware, so take it
+ * all the way back down so we can try again */
+ D_INFO("Alive failed.\n");
+ goto restart;
+ }
+
+ /* Initialize uCode has loaded Runtime uCode ... verify inst image.
+ * This is a paranoid check, because we would not have gotten the
+ * "runtime" alive if code weren't properly loaded. */
+ if (il3945_verify_ucode(il)) {
+ /* Runtime instruction load was bad;
+ * take it all the way back down so we can try again */
+ D_INFO("Bad runtime uCode load.\n");
+ goto restart;
+ }
+
+ rfkill = il_rd_prph(il, APMG_RFKILL_REG);
+ D_INFO("RFKILL status: 0x%x\n", rfkill);
+
+ if (rfkill & 0x1) {
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+ /* if RFKILL is not on, then wait for thermal
+ * sensor in adapter to kick in */
+ while (il3945_hw_get_temperature(il) == 0) {
+ thermal_spin++;
+ udelay(10);
+ }
+
+ if (thermal_spin)
+ D_INFO("Thermal calibration took %dus\n",
+ thermal_spin * 10);
+ } else
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+
+ /* After the ALIVE response, we can send commands to 3945 uCode */
+ set_bit(STATUS_ALIVE, &il->status);
+
+ /* Enable watchdog to monitor the driver tx queues */
+ il_setup_watchdog(il);
+
+ if (il_is_rfkill(il))
+ return;
+
+ ieee80211_wake_queues(il->hw);
+
+ il->active_rate = RATES_MASK_3945;
+
+ il_power_update_mode(il, true);
+
+ if (il_is_associated(il)) {
+ struct il3945_rxon_cmd *active_rxon =
+ (struct il3945_rxon_cmd *)(&ctx->active);
+
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ } else {
+ /* Initialize our rx_config data */
+ il_connection_init_rx_config(il, ctx);
+ }
+
+ /* Configure Bluetooth device coexistence support */
+ il_send_bt_config(il);
+
+ set_bit(STATUS_READY, &il->status);
+
+ /* Configure the adapter for unassociated operation */
+ il3945_commit_rxon(il, ctx);
+
+ il3945_reg_txpower_periodic(il);
+
+ D_INFO("ALIVE processing complete.\n");
+ wake_up(&il->wait_command_queue);
+
+ return;
+
+ restart:
+ queue_work(il->workqueue, &il->restart);
+}
+
+static void il3945_cancel_deferred_work(struct il_priv *il);
+
+static void __il3945_down(struct il_priv *il)
+{
+ unsigned long flags;
+ int exit_pending;
+
+ D_INFO(DRV_NAME " is going down\n");
+
+ il_scan_cancel_timeout(il, 200);
+
+ exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
+ * to prevent rearm timer */
+ del_timer_sync(&il->watchdog);
+
+ /* Station information will now be cleared in device */
+ il_clear_ucode_stations(il, NULL);
+ il_dealloc_bcast_stations(il);
+ il_clear_driver_stations(il);
+
+ /* Unblock any waiting calls */
+ wake_up_all(&il->wait_command_queue);
+
+ /* Wipe out the EXIT_PENDING status bit if we are not actually
+ * exiting the module */
+ if (!exit_pending)
+ clear_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* stop and reset the on-board processor */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ /* tell the device to stop sending interrupts */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+ il3945_synchronize_irq(il);
+
+ if (il->mac80211_registered)
+ ieee80211_stop_queues(il->hw);
+
+ /* If we have not previously called il3945_init() then
+ * clear all bits but the RF Kill bits and return */
+ if (!il_is_init(il)) {
+ il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
+ STATUS_RF_KILL_HW |
+ test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
+ STATUS_GEO_CONFIGURED |
+ test_bit(STATUS_EXIT_PENDING, &il->status) <<
+ STATUS_EXIT_PENDING;
+ goto exit;
+ }
+
+ /* ...otherwise clear out all the status bits but the RF Kill
+ * bit and continue taking the NIC down. */
+ il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
+ STATUS_RF_KILL_HW |
+ test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
+ STATUS_GEO_CONFIGURED |
+ test_bit(STATUS_FW_ERROR, &il->status) <<
+ STATUS_FW_ERROR |
+ test_bit(STATUS_EXIT_PENDING, &il->status) <<
+ STATUS_EXIT_PENDING;
+
+ il3945_hw_txq_ctx_stop(il);
+ il3945_hw_rxq_stop(il);
+
+ /* Power-down device's busmaster DMA clocks */
+ il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+ udelay(5);
+
+ /* Stop the device, and put it in low power state */
+ il_apm_stop(il);
+
+ exit:
+ memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
+
+ if (il->beacon_skb)
+ dev_kfree_skb(il->beacon_skb);
+ il->beacon_skb = NULL;
+
+ /* clear out any free frames */
+ il3945_clear_free_frames(il);
+}
+
+static void il3945_down(struct il_priv *il)
+{
+ mutex_lock(&il->mutex);
+ __il3945_down(il);
+ mutex_unlock(&il->mutex);
+
+ il3945_cancel_deferred_work(il);
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int il3945_alloc_bcast_station(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ unsigned long flags;
+ u8 sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ sta_id = il_prep_station(il, ctx,
+ il_bcast_addr, false, NULL);
+ if (sta_id == IL_INVALID_STATION) {
+ IL_ERR("Unable to prepare broadcast station\n");
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return -EINVAL;
+ }
+
+ il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
+ il->stations[sta_id].used |= IL_STA_BCAST;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+
+static int __il3945_up(struct il_priv *il)
+{
+ int rc, i;
+
+ rc = il3945_alloc_bcast_station(il);
+ if (rc)
+ return rc;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ IL_WARN("Exit pending; will not bring the NIC up\n");
+ return -EIO;
+ }
+
+ if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
+ IL_ERR("ucode not available for device bring up\n");
+ return -EIO;
+ }
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (_il_rd(il, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+ else {
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+ IL_WARN("Radio disabled by HW RF Kill switch\n");
+ return -ENODEV;
+ }
+
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+
+ rc = il3945_hw_nic_init(il);
+ if (rc) {
+ IL_ERR("Unable to int nic\n");
+ return rc;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+ il_enable_interrupts(il);
+
+ /* really make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ /* Copy original ucode data image from disk into backup cache.
+ * This will be used to initialize the on-board processor's
+ * data SRAM for a clean start when the runtime program first loads. */
+ memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
+ il->ucode_data.len);
+
+ /* We return success when we resume from suspend and rf_kill is on. */
+ if (test_bit(STATUS_RF_KILL_HW, &il->status))
+ return 0;
+
+ for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+ /* load bootstrap state machine,
+ * load bootstrap program into processor's memory,
+ * prepare to load the "initialize" uCode */
+ rc = il->cfg->ops->lib->load_ucode(il);
+
+ if (rc) {
+ IL_ERR(
+ "Unable to set up bootstrap uCode: %d\n", rc);
+ continue;
+ }
+
+ /* start card; "initialize" will load runtime ucode */
+ il3945_nic_start(il);
+
+ D_INFO(DRV_NAME " is coming up\n");
+
+ return 0;
+ }
+
+ set_bit(STATUS_EXIT_PENDING, &il->status);
+ __il3945_down(il);
+ clear_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* tried to restart and config the device for as long as our
+ * patience could withstand */
+ IL_ERR("Unable to initialize device after %d attempts.\n", i);
+ return -EIO;
+}
+
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void il3945_bg_init_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, init_alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ goto out;
+
+ il3945_init_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void il3945_bg_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ goto out;
+
+ il3945_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+/*
+ * 3945 cannot interrupt driver when hardware rf kill switch toggles;
+ * driver must poll CSR_GP_CNTRL_REG register for change. This register
+ * *is* readable even when device has been SW_RESET into low power mode
+ * (e.g. during RF KILL).
+ */
+static void il3945_rfkill_poll(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, _3945.rfkill_poll.work);
+ bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &il->status);
+ bool new_rfkill = !(_il_rd(il, CSR_GP_CNTRL)
+ & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
+
+ if (new_rfkill != old_rfkill) {
+ if (new_rfkill)
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+
+ wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
+
+ D_RF_KILL("RF_KILL bit toggled to %s.\n",
+ new_rfkill ? "disable radio" : "enable radio");
+ }
+
+ /* Keep this running, even if radio now enabled. This will be
+ * cancelled in mac_start() if system decides to start again */
+ queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
+ round_jiffies_relative(2 * HZ));
+
+}
+
+int il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
+{
+ struct il_host_cmd cmd = {
+ .id = REPLY_SCAN_CMD,
+ .len = sizeof(struct il3945_scan_cmd),
+ .flags = CMD_SIZE_HUGE,
+ };
+ struct il3945_scan_cmd *scan;
+ u8 n_probes = 0;
+ enum ieee80211_band band;
+ bool is_active = false;
+ int ret;
+ u16 len;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->scan_cmd) {
+ il->scan_cmd = kmalloc(sizeof(struct il3945_scan_cmd) +
+ IL_MAX_SCAN_SIZE, GFP_KERNEL);
+ if (!il->scan_cmd) {
+ D_SCAN("Fail to allocate scan memory\n");
+ return -ENOMEM;
+ }
+ }
+ scan = il->scan_cmd;
+ memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
+
+ scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
+ scan->quiet_time = IL_ACTIVE_QUIET_TIME;
+
+ if (il_is_associated(il)) {
+ u16 interval;
+ u32 extra;
+ u32 suspend_time = 100;
+ u32 scan_suspend_time = 100;
+
+ D_INFO("Scanning while associated...\n");
+
+ interval = vif->bss_conf.beacon_int;
+
+ scan->suspend_time = 0;
+ scan->max_out_time = cpu_to_le32(200 * 1024);
+ if (!interval)
+ interval = suspend_time;
+ /*
+ * suspend time format:
+ * 0-19: beacon interval in usec (time before exec.)
+ * 20-23: 0
+ * 24-31: number of beacons (suspend between channels)
+ */
+
+ extra = (suspend_time / interval) << 24;
+ scan_suspend_time = 0xFF0FFFFF &
+ (extra | ((suspend_time % interval) * 1024));
+
+ scan->suspend_time = cpu_to_le32(scan_suspend_time);
+ D_SCAN("suspend_time 0x%X beacon interval %d\n",
+ scan_suspend_time, interval);
+ }
+
+ if (il->scan_request->n_ssids) {
+ int i, p = 0;
+ D_SCAN("Kicking off active scan\n");
+ for (i = 0; i < il->scan_request->n_ssids; i++) {
+ /* always does wildcard anyway */
+ if (!il->scan_request->ssids[i].ssid_len)
+ continue;
+ scan->direct_scan[p].id = WLAN_EID_SSID;
+ scan->direct_scan[p].len =
+ il->scan_request->ssids[i].ssid_len;
+ memcpy(scan->direct_scan[p].ssid,
+ il->scan_request->ssids[i].ssid,
+ il->scan_request->ssids[i].ssid_len);
+ n_probes++;
+ p++;
+ }
+ is_active = true;
+ } else
+ D_SCAN("Kicking off passive scan.\n");
+
+ /* We don't build a direct scan probe request; the uCode will do
+ * that based on the direct_mask added to each channel entry */
+ scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
+ scan->tx_cmd.sta_id = il->ctx.bcast_sta_id;
+ scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ /* flags + rate selection */
+
+ switch (il->scan_band) {
+ case IEEE80211_BAND_2GHZ:
+ scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
+ scan->tx_cmd.rate = RATE_1M_PLCP;
+ band = IEEE80211_BAND_2GHZ;
+ break;
+ case IEEE80211_BAND_5GHZ:
+ scan->tx_cmd.rate = RATE_6M_PLCP;
+ band = IEEE80211_BAND_5GHZ;
+ break;
+ default:
+ IL_WARN("Invalid scan band\n");
+ return -EIO;
+ }
+
+ /*
+ * If active scaning is requested but a certain channel
+ * is marked passive, we can do active scanning if we
+ * detect transmissions.
+ */
+ scan->good_CRC_th = is_active ? IL_GOOD_CRC_TH_DEFAULT :
+ IL_GOOD_CRC_TH_DISABLED;
+
+ len = il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
+ vif->addr, il->scan_request->ie,
+ il->scan_request->ie_len,
+ IL_MAX_SCAN_SIZE - sizeof(*scan));
+ scan->tx_cmd.len = cpu_to_le16(len);
+
+ /* select Rx antennas */
+ scan->flags |= il3945_get_antenna_flags(il);
+
+ scan->channel_count = il3945_get_channels_for_scan(il, band, is_active, n_probes,
+ (void *)&scan->data[len], vif);
+ if (scan->channel_count == 0) {
+ D_SCAN("channel count %d\n", scan->channel_count);
+ return -EIO;
+ }
+
+ cmd.len += le16_to_cpu(scan->tx_cmd.len) +
+ scan->channel_count * sizeof(struct il3945_scan_channel);
+ cmd.data = scan;
+ scan->len = cpu_to_le16(cmd.len);
+
+ set_bit(STATUS_SCAN_HW, &il->status);
+ ret = il_send_cmd_sync(il, &cmd);
+ if (ret)
+ clear_bit(STATUS_SCAN_HW, &il->status);
+ return ret;
+}
+
+void il3945_post_scan(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+
+ /*
+ * Since setting the RXON may have been deferred while
+ * performing the scan, fire one off if needed
+ */
+ if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+ il3945_commit_rxon(il, ctx);
+}
+
+static void il3945_bg_restart(struct work_struct *data)
+{
+ struct il_priv *il = container_of(data, struct il_priv, restart);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
+ mutex_lock(&il->mutex);
+ il->ctx.vif = NULL;
+ il->is_open = 0;
+ mutex_unlock(&il->mutex);
+ il3945_down(il);
+ ieee80211_restart_hw(il->hw);
+ } else {
+ il3945_down(il);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ mutex_unlock(&il->mutex);
+ return;
+ }
+
+ __il3945_up(il);
+ mutex_unlock(&il->mutex);
+ }
+}
+
+static void il3945_bg_rx_replenish(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, rx_replenish);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ goto out;
+
+ il3945_rx_replenish(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+void il3945_post_associate(struct il_priv *il)
+{
+ int rc = 0;
+ struct ieee80211_conf *conf = NULL;
+ struct il_rxon_context *ctx = &il->ctx;
+
+ if (!ctx->vif || !il->is_open)
+ return;
+
+ D_ASSOC("Associated as %d to: %pM\n",
+ ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ il_scan_cancel_timeout(il, 200);
+
+ conf = il_ieee80211_get_hw_conf(il->hw);
+
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ il3945_commit_rxon(il, ctx);
+
+ rc = il_send_rxon_timing(il, ctx);
+ if (rc)
+ IL_WARN("REPLY_RXON_TIMING failed - "
+ "Attempting to continue.\n");
+
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+ ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
+
+ D_ASSOC("assoc id %d beacon interval %d\n",
+ ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
+
+ if (ctx->vif->bss_conf.use_short_preamble)
+ ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+ if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+ if (ctx->vif->bss_conf.use_short_slot)
+ ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+ }
+
+ il3945_commit_rxon(il, ctx);
+
+ switch (ctx->vif->type) {
+ case NL80211_IFTYPE_STATION:
+ il3945_rate_scale_init(il->hw, IL_AP_ID);
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ il3945_send_beacon_cmd(il);
+ break;
+ default:
+ IL_ERR("%s Should not be called in %d mode\n",
+ __func__, ctx->vif->type);
+ break;
+ }
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT (2 * HZ)
+
+static int il3945_mac_start(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+ int ret;
+
+ D_MAC80211("enter\n");
+
+ /* we should be verifying the device is ready to be opened */
+ mutex_lock(&il->mutex);
+
+ /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
+ * ucode filename and max sizes are card-specific. */
+
+ if (!il->ucode_code.len) {
+ ret = il3945_read_ucode(il);
+ if (ret) {
+ IL_ERR("Could not read microcode: %d\n", ret);
+ mutex_unlock(&il->mutex);
+ goto out_release_irq;
+ }
+ }
+
+ ret = __il3945_up(il);
+
+ mutex_unlock(&il->mutex);
+
+ if (ret)
+ goto out_release_irq;
+
+ D_INFO("Start UP work.\n");
+
+ /* Wait for START_ALIVE from ucode. Otherwise callbacks from
+ * mac80211 will not be run successfully. */
+ ret = wait_event_timeout(il->wait_command_queue,
+ test_bit(STATUS_READY, &il->status),
+ UCODE_READY_TIMEOUT);
+ if (!ret) {
+ if (!test_bit(STATUS_READY, &il->status)) {
+ IL_ERR(
+ "Wait for START_ALIVE timeout after %dms.\n",
+ jiffies_to_msecs(UCODE_READY_TIMEOUT));
+ ret = -ETIMEDOUT;
+ goto out_release_irq;
+ }
+ }
+
+ /* ucode is running and will send rfkill notifications,
+ * no need to poll the killswitch state anymore */
+ cancel_delayed_work(&il->_3945.rfkill_poll);
+
+ il->is_open = 1;
+ D_MAC80211("leave\n");
+ return 0;
+
+out_release_irq:
+ il->is_open = 0;
+ D_MAC80211("leave - failed\n");
+ return ret;
+}
+
+static void il3945_mac_stop(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MAC80211("enter\n");
+
+ if (!il->is_open) {
+ D_MAC80211("leave - skip\n");
+ return;
+ }
+
+ il->is_open = 0;
+
+ il3945_down(il);
+
+ flush_workqueue(il->workqueue);
+
+ /* start polling the killswitch state again */
+ queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
+ round_jiffies_relative(2 * HZ));
+
+ D_MAC80211("leave\n");
+}
+
+static void il3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MAC80211("enter\n");
+
+ D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+ ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+ if (il3945_tx_skb(il, skb))
+ dev_kfree_skb_any(skb);
+
+ D_MAC80211("leave\n");
+}
+
+void il3945_config_ap(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ struct ieee80211_vif *vif = ctx->vif;
+ int rc = 0;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ /* The following should be done only at AP bring up */
+ if (!(il_is_associated(il))) {
+
+ /* RXON - unassoc (to set timing command) */
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ il3945_commit_rxon(il, ctx);
+
+ /* RXON Timing */
+ rc = il_send_rxon_timing(il, ctx);
+ if (rc)
+ IL_WARN("REPLY_RXON_TIMING failed - "
+ "Attempting to continue.\n");
+
+ ctx->staging.assoc_id = 0;
+
+ if (vif->bss_conf.use_short_preamble)
+ ctx->staging.flags |=
+ RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ ctx->staging.flags &=
+ ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+ if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+ if (vif->bss_conf.use_short_slot)
+ ctx->staging.flags |=
+ RXON_FLG_SHORT_SLOT_MSK;
+ else
+ ctx->staging.flags &=
+ ~RXON_FLG_SHORT_SLOT_MSK;
+ }
+ /* restore RXON assoc */
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ il3945_commit_rxon(il, ctx);
+ }
+ il3945_send_beacon_cmd(il);
+}
+
+static int il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct il_priv *il = hw->priv;
+ int ret = 0;
+ u8 sta_id = IL_INVALID_STATION;
+ u8 static_key;
+
+ D_MAC80211("enter\n");
+
+ if (il3945_mod_params.sw_crypto) {
+ D_MAC80211("leave - hwcrypto disabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ /*
+ * To support IBSS RSN, don't program group keys in IBSS, the
+ * hardware will then not attempt to decrypt the frames.
+ */
+ if (vif->type == NL80211_IFTYPE_ADHOC &&
+ !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
+ return -EOPNOTSUPP;
+
+ static_key = !il_is_associated(il);
+
+ if (!static_key) {
+ sta_id = il_sta_id_or_broadcast(
+ il, &il->ctx, sta);
+ if (sta_id == IL_INVALID_STATION)
+ return -EINVAL;
+ }
+
+ mutex_lock(&il->mutex);
+ il_scan_cancel_timeout(il, 100);
+
+ switch (cmd) {
+ case SET_KEY:
+ if (static_key)
+ ret = il3945_set_static_key(il, key);
+ else
+ ret = il3945_set_dynamic_key(il, key, sta_id);
+ D_MAC80211("enable hwcrypto key\n");
+ break;
+ case DISABLE_KEY:
+ if (static_key)
+ ret = il3945_remove_static_key(il);
+ else
+ ret = il3945_clear_sta_key_info(il, sta_id);
+ D_MAC80211("disable hwcrypto key\n");
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&il->mutex);
+ D_MAC80211("leave\n");
+
+ return ret;
+}
+
+static int il3945_mac_sta_add(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct il_priv *il = hw->priv;
+ struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
+ int ret;
+ bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+ u8 sta_id;
+
+ D_INFO("received request to add station %pM\n",
+ sta->addr);
+ mutex_lock(&il->mutex);
+ D_INFO("proceeding to add station %pM\n",
+ sta->addr);
+ sta_priv->common.sta_id = IL_INVALID_STATION;
+
+
+ ret = il_add_station_common(il,
+ &il->ctx,
+ sta->addr, is_ap, sta, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM (%d)\n",
+ sta->addr, ret);
+ /* Should we return success if return code is EEXIST ? */
+ mutex_unlock(&il->mutex);
+ return ret;
+ }
+
+ sta_priv->common.sta_id = sta_id;
+
+ /* Initialize rate scaling */
+ D_INFO("Initializing rate scaling for station %pM\n",
+ sta->addr);
+ il3945_rs_rate_init(il, sta, sta_id);
+ mutex_unlock(&il->mutex);
+
+ return 0;
+}
+
+static void il3945_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct il_priv *il = hw->priv;
+ __le32 filter_or = 0, filter_nand = 0;
+ struct il_rxon_context *ctx = &il->ctx;
+
+#define CHK(test, flag) do { \
+ if (*total_flags & (test)) \
+ filter_or |= (flag); \
+ else \
+ filter_nand |= (flag); \
+ } while (0)
+
+ D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
+ changed_flags, *total_flags);
+
+ CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+ CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
+ CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+ mutex_lock(&il->mutex);
+
+ ctx->staging.filter_flags &= ~filter_nand;
+ ctx->staging.filter_flags |= filter_or;
+
+ /*
+ * Not committing directly because hardware can perform a scan,
+ * but even if hw is ready, committing here breaks for some reason,
+ * we'll eventually commit the filter flags change anyway.
+ */
+
+ mutex_unlock(&il->mutex);
+
+ /*
+ * Receiving all multicast frames is always enabled by the
+ * default flags setup in il_connection_init_rx_config()
+ * since we currently do not support programming multicast
+ * filters into the device.
+ */
+ *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+ FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t il3945_show_debug_level(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
+}
+static ssize_t il3945_store_debug_level(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 0, &val);
+ if (ret)
+ IL_INFO("%s is not in hex or decimal form.\n", buf);
+ else {
+ il->debug_level = val;
+ if (il_alloc_traffic_mem(il))
+ IL_ERR(
+ "Not enough memory to generate traffic log\n");
+ }
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ il3945_show_debug_level, il3945_store_debug_level);
+
+#endif /* CONFIG_IWLEGACY_DEBUG */
+
+static ssize_t il3945_show_temperature(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_alive(il))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
+
+static ssize_t il3945_show_tx_power(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ return sprintf(buf, "%d\n", il->tx_power_user_lmt);
+}
+
+static ssize_t il3945_store_tx_power(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ char *p = (char *)buf;
+ u32 val;
+
+ val = simple_strtoul(p, &p, 10);
+ if (p == buf)
+ IL_INFO(": %s is not in decimal form.\n", buf);
+ else
+ il3945_hw_reg_set_txpower(il, val);
+
+ return count;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power, il3945_store_tx_power);
+
+static ssize_t il3945_show_flags(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ struct il_rxon_context *ctx = &il->ctx;
+
+ return sprintf(buf, "0x%04X\n", ctx->active.flags);
+}
+
+static ssize_t il3945_store_flags(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ u32 flags = simple_strtoul(buf, NULL, 0);
+ struct il_rxon_context *ctx = &il->ctx;
+
+ mutex_lock(&il->mutex);
+ if (le32_to_cpu(ctx->staging.flags) != flags) {
+ /* Cancel any currently running scans... */
+ if (il_scan_cancel_timeout(il, 100))
+ IL_WARN("Could not cancel scan.\n");
+ else {
+ D_INFO("Committing rxon.flags = 0x%04X\n",
+ flags);
+ ctx->staging.flags = cpu_to_le32(flags);
+ il3945_commit_rxon(il, ctx);
+ }
+ }
+ mutex_unlock(&il->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags, il3945_store_flags);
+
+static ssize_t il3945_show_filter_flags(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ struct il_rxon_context *ctx = &il->ctx;
+
+ return sprintf(buf, "0x%04X\n",
+ le32_to_cpu(ctx->active.filter_flags));
+}
+
+static ssize_t il3945_store_filter_flags(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ struct il_rxon_context *ctx = &il->ctx;
+ u32 filter_flags = simple_strtoul(buf, NULL, 0);
+
+ mutex_lock(&il->mutex);
+ if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
+ /* Cancel any currently running scans... */
+ if (il_scan_cancel_timeout(il, 100))
+ IL_WARN("Could not cancel scan.\n");
+ else {
+ D_INFO("Committing rxon.filter_flags = "
+ "0x%04X\n", filter_flags);
+ ctx->staging.filter_flags =
+ cpu_to_le32(filter_flags);
+ il3945_commit_rxon(il, ctx);
+ }
+ }
+ mutex_unlock(&il->mutex);
+
+ return count;
+}
+
+static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
+ il3945_store_filter_flags);
+
+static ssize_t il3945_show_measurement(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ struct il_spectrum_notification measure_report;
+ u32 size = sizeof(measure_report), len = 0, ofs = 0;
+ u8 *data = (u8 *)&measure_report;
+ unsigned long flags;
+
+ spin_lock_irqsave(&il->lock, flags);
+ if (!(il->measurement_status & MEASUREMENT_READY)) {
+ spin_unlock_irqrestore(&il->lock, flags);
+ return 0;
+ }
+ memcpy(&measure_report, &il->measure_report, size);
+ il->measurement_status = 0;
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ while (size && PAGE_SIZE - len) {
+ hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
+ PAGE_SIZE - len, 1);
+ len = strlen(buf);
+ if (PAGE_SIZE - len)
+ buf[len++] = '\n';
+
+ ofs += 16;
+ size -= min(size, 16U);
+ }
+
+ return len;
+}
+
+static ssize_t il3945_store_measurement(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ struct il_rxon_context *ctx = &il->ctx;
+ struct ieee80211_measurement_params params = {
+ .channel = le16_to_cpu(ctx->active.channel),
+ .start_time = cpu_to_le64(il->_3945.last_tsf),
+ .duration = cpu_to_le16(1),
+ };
+ u8 type = IL_MEASURE_BASIC;
+ u8 buffer[32];
+ u8 channel;
+
+ if (count) {
+ char *p = buffer;
+ strncpy(buffer, buf, min(sizeof(buffer), count));
+ channel = simple_strtoul(p, NULL, 0);
+ if (channel)
+ params.channel = channel;
+
+ p = buffer;
+ while (*p && *p != ' ')
+ p++;
+ if (*p)
+ type = simple_strtoul(p + 1, NULL, 0);
+ }
+
+ D_INFO("Invoking measurement of type %d on "
+ "channel %d (for '%s')\n", type, params.channel, buf);
+ il3945_get_measurement(il, ¶ms, type);
+
+ return count;
+}
+
+static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
+ il3945_show_measurement, il3945_store_measurement);
+
+static ssize_t il3945_store_retry_rate(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ il->retry_rate = simple_strtoul(buf, NULL, 0);
+ if (il->retry_rate <= 0)
+ il->retry_rate = 1;
+
+ return count;
+}
+
+static ssize_t il3945_show_retry_rate(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ return sprintf(buf, "%d", il->retry_rate);
+}
+
+static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
+ il3945_store_retry_rate);
+
+
+static ssize_t il3945_show_channels(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ /* all this shit doesn't belong into sysfs anyway */
+ return 0;
+}
+
+static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
+
+static ssize_t il3945_show_antenna(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_alive(il))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", il3945_mod_params.antenna);
+}
+
+static ssize_t il3945_store_antenna(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il __maybe_unused = dev_get_drvdata(d);
+ int ant;
+
+ if (count == 0)
+ return 0;
+
+ if (sscanf(buf, "%1i", &ant) != 1) {
+ D_INFO("not in hex or decimal form.\n");
+ return count;
+ }
+
+ if (ant >= 0 && ant <= 2) {
+ D_INFO("Setting antenna select to %d.\n", ant);
+ il3945_mod_params.antenna = (enum il3945_antenna)ant;
+ } else
+ D_INFO("Bad antenna select value %d.\n", ant);
+
+
+ return count;
+}
+
+static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna, il3945_store_antenna);
+
+static ssize_t il3945_show_status(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ if (!il_is_alive(il))
+ return -EAGAIN;
+ return sprintf(buf, "0x%08x\n", (int)il->status);
+}
+
+static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
+
+static ssize_t il3945_dump_error_log(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ char *p = (char *)buf;
+
+ if (p[0] == '1')
+ il3945_dump_nic_error_log(il);
+
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
+
+/*****************************************************************************
+ *
+ * driver setup and tear down
+ *
+ *****************************************************************************/
+
+static void il3945_setup_deferred_work(struct il_priv *il)
+{
+ il->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+ init_waitqueue_head(&il->wait_command_queue);
+
+ INIT_WORK(&il->restart, il3945_bg_restart);
+ INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
+ INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
+ INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
+ INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
+
+ il_setup_scan_deferred_work(il);
+
+ il3945_hw_setup_deferred_work(il);
+
+ init_timer(&il->watchdog);
+ il->watchdog.data = (unsigned long)il;
+ il->watchdog.function = il_bg_watchdog;
+
+ tasklet_init(&il->irq_tasklet, (void (*)(unsigned long))
+ il3945_irq_tasklet, (unsigned long)il);
+}
+
+static void il3945_cancel_deferred_work(struct il_priv *il)
+{
+ il3945_hw_cancel_deferred_work(il);
+
+ cancel_delayed_work_sync(&il->init_alive_start);
+ cancel_delayed_work(&il->alive_start);
+
+ il_cancel_scan_deferred_work(il);
+}
+
+static struct attribute *il3945_sysfs_entries[] = {
+ &dev_attr_antenna.attr,
+ &dev_attr_channels.attr,
+ &dev_attr_dump_errors.attr,
+ &dev_attr_flags.attr,
+ &dev_attr_filter_flags.attr,
+ &dev_attr_measurement.attr,
+ &dev_attr_retry_rate.attr,
+ &dev_attr_status.attr,
+ &dev_attr_temperature.attr,
+ &dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLEGACY_DEBUG
+ &dev_attr_debug_level.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group il3945_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = il3945_sysfs_entries,
+};
+
+struct ieee80211_ops il3945_hw_ops = {
+ .tx = il3945_mac_tx,
+ .start = il3945_mac_start,
+ .stop = il3945_mac_stop,
+ .add_interface = il_mac_add_interface,
+ .remove_interface = il_mac_remove_interface,
+ .change_interface = il_mac_change_interface,
+ .config = il_mac_config,
+ .configure_filter = il3945_configure_filter,
+ .set_key = il3945_mac_set_key,
+ .conf_tx = il_mac_conf_tx,
+ .reset_tsf = il_mac_reset_tsf,
+ .bss_info_changed = il_mac_bss_info_changed,
+ .hw_scan = il_mac_hw_scan,
+ .sta_add = il3945_mac_sta_add,
+ .sta_remove = il_mac_sta_remove,
+ .tx_last_beacon = il_mac_tx_last_beacon,
+};
+
+static int il3945_init_drv(struct il_priv *il)
+{
+ int ret;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+
+ il->retry_rate = 1;
+ il->beacon_skb = NULL;
+
+ spin_lock_init(&il->sta_lock);
+ spin_lock_init(&il->hcmd_lock);
+
+ INIT_LIST_HEAD(&il->free_frames);
+
+ mutex_init(&il->mutex);
+
+ il->ieee_channels = NULL;
+ il->ieee_rates = NULL;
+ il->band = IEEE80211_BAND_2GHZ;
+
+ il->iw_mode = NL80211_IFTYPE_STATION;
+ il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
+
+ /* initialize force reset */
+ il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+ if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
+ IL_WARN("Unsupported EEPROM version: 0x%04X\n",
+ eeprom->version);
+ ret = -EINVAL;
+ goto err;
+ }
+ ret = il_init_channel_map(il);
+ if (ret) {
+ IL_ERR("initializing regulatory failed: %d\n", ret);
+ goto err;
+ }
+
+ /* Set up txpower settings in driver for all channels */
+ if (il3945_txpower_set_from_eeprom(il)) {
+ ret = -EIO;
+ goto err_free_channel_map;
+ }
+
+ ret = il_init_geos(il);
+ if (ret) {
+ IL_ERR("initializing geos failed: %d\n", ret);
+ goto err_free_channel_map;
+ }
+ il3945_init_hw_rates(il, il->ieee_rates);
+
+ return 0;
+
+err_free_channel_map:
+ il_free_channel_map(il);
+err:
+ return ret;
+}
+
+#define IL3945_MAX_PROBE_REQUEST 200
+
+static int il3945_setup_mac(struct il_priv *il)
+{
+ int ret;
+ struct ieee80211_hw *hw = il->hw;
+
+ hw->rate_control_algorithm = "iwl-3945-rs";
+ hw->sta_data_size = sizeof(struct il3945_sta_priv);
+ hw->vif_data_size = sizeof(struct il_vif_priv);
+
+ /* Tell mac80211 our characteristics */
+ hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_SPECTRUM_MGMT;
+
+ hw->wiphy->interface_modes =
+ il->ctx.interface_modes;
+
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+ WIPHY_FLAG_DISABLE_BEACON_HINTS |
+ WIPHY_FLAG_IBSS_RSN;
+
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
+
+ /* Default value; 4 EDCA QOS priorities */
+ hw->queues = 4;
+
+ if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &il->bands[IEEE80211_BAND_2GHZ];
+
+ if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &il->bands[IEEE80211_BAND_5GHZ];
+
+ il_leds_init(il);
+
+ ret = ieee80211_register_hw(il->hw);
+ if (ret) {
+ IL_ERR("Failed to register hw (error %d)\n", ret);
+ return ret;
+ }
+ il->mac80211_registered = 1;
+
+ return 0;
+}
+
+static int il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = 0;
+ struct il_priv *il;
+ struct ieee80211_hw *hw;
+ struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
+ struct il3945_eeprom *eeprom;
+ unsigned long flags;
+
+ /***********************
+ * 1. Allocating HW data
+ * ********************/
+
+ /* mac80211 allocates memory for this device instance, including
+ * space for this driver's ilate structure */
+ hw = il_alloc_all(cfg);
+ if (hw == NULL) {
+ pr_err("Can not allocate network device\n");
+ err = -ENOMEM;
+ goto out;
+ }
+ il = hw->priv;
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+
+ il->cmd_queue = IL39_CMD_QUEUE_NUM;
+
+ il->ctx.ctxid = 0;
+
+ il->ctx.rxon_cmd = REPLY_RXON;
+ il->ctx.rxon_timing_cmd = REPLY_RXON_TIMING;
+ il->ctx.rxon_assoc_cmd = REPLY_RXON_ASSOC;
+ il->ctx.qos_cmd = REPLY_QOS_PARAM;
+ il->ctx.ap_sta_id = IL_AP_ID;
+ il->ctx.wep_key_cmd = REPLY_WEPKEY;
+ il->ctx.interface_modes =
+ BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_ADHOC);
+ il->ctx.ibss_devtype = RXON_DEV_TYPE_IBSS;
+ il->ctx.station_devtype = RXON_DEV_TYPE_ESS;
+ il->ctx.unused_devtype = RXON_DEV_TYPE_ESS;
+
+ /*
+ * Disabling hardware scan means that mac80211 will perform scans
+ * "the hard way", rather than using device's scan.
+ */
+ if (il3945_mod_params.disable_hw_scan) {
+ D_INFO("Disabling hw_scan\n");
+ il3945_hw_ops.hw_scan = NULL;
+ }
+
+ D_INFO("*** LOAD DRIVER ***\n");
+ il->cfg = cfg;
+ il->pci_dev = pdev;
+ il->inta_mask = CSR_INI_SET_MASK;
+
+ if (il_alloc_traffic_mem(il))
+ IL_ERR("Not enough memory to generate traffic log\n");
+
+ /***************************
+ * 2. Initializing PCI bus
+ * *************************/
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
+ if (pci_enable_device(pdev)) {
+ err = -ENODEV;
+ goto out_ieee80211_free_hw;
+ }
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (err) {
+ IL_WARN("No suitable DMA available.\n");
+ goto out_pci_disable_device;
+ }
+
+ pci_set_drvdata(pdev, il);
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err)
+ goto out_pci_disable_device;
+
+ /***********************
+ * 3. Read REV Register
+ * ********************/
+ il->hw_base = pci_iomap(pdev, 0, 0);
+ if (!il->hw_base) {
+ err = -ENODEV;
+ goto out_pci_release_regions;
+ }
+
+ D_INFO("pci_resource_len = 0x%08llx\n",
+ (unsigned long long) pci_resource_len(pdev, 0));
+ D_INFO("pci_resource_base = %p\n", il->hw_base);
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_write_config_byte(pdev, 0x41, 0x00);
+
+ /* these spin locks will be used in apm_ops.init and EEPROM access
+ * we should init now
+ */
+ spin_lock_init(&il->reg_lock);
+ spin_lock_init(&il->lock);
+
+ /*
+ * stop and reset the on-board processor just in case it is in a
+ * strange state ... like being left stranded by a primary kernel
+ * and this is now the kdump kernel trying to start up
+ */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ /***********************
+ * 4. Read EEPROM
+ * ********************/
+
+ /* Read the EEPROM */
+ err = il_eeprom_init(il);
+ if (err) {
+ IL_ERR("Unable to init EEPROM\n");
+ goto out_iounmap;
+ }
+ /* MAC Address location in EEPROM same for 3945/4965 */
+ eeprom = (struct il3945_eeprom *)il->eeprom;
+ D_INFO("MAC address: %pM\n", eeprom->mac_address);
+ SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
+
+ /***********************
+ * 5. Setup HW Constants
+ * ********************/
+ /* Device-specific setup */
+ if (il3945_hw_set_hw_params(il)) {
+ IL_ERR("failed to set hw settings\n");
+ goto out_eeprom_free;
+ }
+
+ /***********************
+ * 6. Setup il
+ * ********************/
+
+ err = il3945_init_drv(il);
+ if (err) {
+ IL_ERR("initializing driver failed\n");
+ goto out_unset_hw_params;
+ }
+
+ IL_INFO("Detected Intel Wireless WiFi Link %s\n",
+ il->cfg->name);
+
+ /***********************
+ * 7. Setup Services
+ * ********************/
+
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ pci_enable_msi(il->pci_dev);
+
+ err = request_irq(il->pci_dev->irq, il_isr,
+ IRQF_SHARED, DRV_NAME, il);
+ if (err) {
+ IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
+ goto out_disable_msi;
+ }
+
+ err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
+ if (err) {
+ IL_ERR("failed to create sysfs device attributes\n");
+ goto out_release_irq;
+ }
+
+ il_set_rxon_channel(il,
+ &il->bands[IEEE80211_BAND_2GHZ].channels[5],
+ &il->ctx);
+ il3945_setup_deferred_work(il);
+ il3945_setup_rx_handlers(il);
+ il_power_initialize(il);
+
+ /*********************************
+ * 8. Setup and Register mac80211
+ * *******************************/
+
+ il_enable_interrupts(il);
+
+ err = il3945_setup_mac(il);
+ if (err)
+ goto out_remove_sysfs;
+
+ err = il_dbgfs_register(il, DRV_NAME);
+ if (err)
+ IL_ERR("failed to create debugfs files. Ignoring error: %d\n", err);
+
+ /* Start monitoring the killswitch */
+ queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
+ 2 * HZ);
+
+ return 0;
+
+ out_remove_sysfs:
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+ sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
+ out_release_irq:
+ free_irq(il->pci_dev->irq, il);
+ out_disable_msi:
+ pci_disable_msi(il->pci_dev);
+ il_free_geos(il);
+ il_free_channel_map(il);
+ out_unset_hw_params:
+ il3945_unset_hw_params(il);
+ out_eeprom_free:
+ il_eeprom_free(il);
+ out_iounmap:
+ pci_iounmap(pdev, il->hw_base);
+ out_pci_release_regions:
+ pci_release_regions(pdev);
+ out_pci_disable_device:
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+ out_ieee80211_free_hw:
+ il_free_traffic_mem(il);
+ ieee80211_free_hw(il->hw);
+ out:
+ return err;
+}
+
+static void __devexit il3945_pci_remove(struct pci_dev *pdev)
+{
+ struct il_priv *il = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ if (!il)
+ return;
+
+ D_INFO("*** UNLOAD DRIVER ***\n");
+
+ il_dbgfs_unregister(il);
+
+ set_bit(STATUS_EXIT_PENDING, &il->status);
+
+ il_leds_exit(il);
+
+ if (il->mac80211_registered) {
+ ieee80211_unregister_hw(il->hw);
+ il->mac80211_registered = 0;
+ } else {
+ il3945_down(il);
+ }
+
+ /*
+ * Make sure device is reset to low power before unloading driver.
+ * This may be redundant with il_down(), but there are paths to
+ * run il_down() without calling apm_ops.stop(), and there are
+ * paths to avoid running il_down() at all before leaving driver.
+ * This (inexpensive) call *makes sure* device is reset.
+ */
+ il_apm_stop(il);
+
+ /* make sure we flush any pending irq or
+ * tasklet for the driver
+ */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il3945_synchronize_irq(il);
+
+ sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
+
+ cancel_delayed_work_sync(&il->_3945.rfkill_poll);
+
+ il3945_dealloc_ucode_pci(il);
+
+ if (il->rxq.bd)
+ il3945_rx_queue_free(il, &il->rxq);
+ il3945_hw_txq_ctx_free(il);
+
+ il3945_unset_hw_params(il);
+
+ /*netif_stop_queue(dev); */
+ flush_workqueue(il->workqueue);
+
+ /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
+ * il->workqueue... so we can't take down the workqueue
+ * until now... */
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+ il_free_traffic_mem(il);
+
+ free_irq(pdev->irq, il);
+ pci_disable_msi(pdev);
+
+ pci_iounmap(pdev, il->hw_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+ il_free_channel_map(il);
+ il_free_geos(il);
+ kfree(il->scan_cmd);
+ if (il->beacon_skb)
+ dev_kfree_skb(il->beacon_skb);
+
+ ieee80211_free_hw(il->hw);
+}
+
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+static struct pci_driver il3945_driver = {
+ .name = DRV_NAME,
+ .id_table = il3945_hw_card_ids,
+ .probe = il3945_pci_probe,
+ .remove = __devexit_p(il3945_pci_remove),
+ .driver.pm = IL_LEGACY_PM_OPS,
+};
+
+static int __init il3945_init(void)
+{
+
+ int ret;
+ pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ pr_info(DRV_COPYRIGHT "\n");
+
+ ret = il3945_rate_control_register();
+ if (ret) {
+ pr_err("Unable to register rate control algorithm: %d\n", ret);
+ return ret;
+ }
+
+ ret = pci_register_driver(&il3945_driver);
+ if (ret) {
+ pr_err("Unable to initialize PCI module\n");
+ goto error_register;
+ }
+
+ return ret;
+
+error_register:
+ il3945_rate_control_unregister();
+ return ret;
+}
+
+static void __exit il3945_exit(void)
+{
+ pci_unregister_driver(&il3945_driver);
+ il3945_rate_control_unregister();
+}
+
+MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
+
+module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
+MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
+module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto,
+ "using software crypto (default 1 [software])");
+module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan,
+ int, S_IRUGO);
+MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
+#ifdef CONFIG_IWLEGACY_DEBUG
+module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
+
+module_exit(il3945_exit);
+module_init(il3945_init);
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+#include <net/mac80211.h>
+
+#include "iwl-fh.h"
+#include "iwl-3945-fh.h"
+#include "iwl-commands.h"
+#include "iwl-sta.h"
+#include "iwl-3945.h"
+#include "iwl-eeprom.h"
+#include "iwl-core.h"
+#include "iwl-helpers.h"
+#include "iwl-led.h"
+#include "iwl-3945-led.h"
+#include "iwl-3945-debugfs.h"
+
+#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
+ [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
+ RATE_##r##M_IEEE, \
+ RATE_##ip##M_IDX, \
+ RATE_##in##M_IDX, \
+ RATE_##rp##M_IDX, \
+ RATE_##rn##M_IDX, \
+ RATE_##pp##M_IDX, \
+ RATE_##np##M_IDX, \
+ RATE_##r##M_IDX_TBL, \
+ RATE_##ip##M_IDX_TBL }
+
+/*
+ * Parameter order:
+ * rate, prev rate, next rate, prev tgg rate, next tgg rate
+ *
+ * If there isn't a valid next or previous rate then INV is used which
+ * maps to RATE_INVALID
+ *
+ */
+const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
+ IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
+ IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
+ IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
+ IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
+ IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
+ IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
+ IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
+ IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
+ IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
+ IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
+ IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
+ IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
+};
+
+static inline u8 il3945_get_prev_ieee_rate(u8 rate_idx)
+{
+ u8 rate = il3945_rates[rate_idx].prev_ieee;
+
+ if (rate == RATE_INVALID)
+ rate = rate_idx;
+ return rate;
+}
+
+/* 1 = enable the il3945_disable_events() function */
+#define IL_EVT_DISABLE (0)
+#define IL_EVT_DISABLE_SIZE (1532/32)
+
+/**
+ * il3945_disable_events - Disable selected events in uCode event log
+ *
+ * Disable an event by writing "1"s into "disable"
+ * bitmap in SRAM. Bit position corresponds to Event # (id/type).
+ * Default values of 0 enable uCode events to be logged.
+ * Use for only special debugging. This function is just a placeholder as-is,
+ * you'll need to provide the special bits! ...
+ * ... and set IL_EVT_DISABLE to 1. */
+void il3945_disable_events(struct il_priv *il)
+{
+ int i;
+ u32 base; /* SRAM address of event log header */
+ u32 disable_ptr; /* SRAM address of event-disable bitmap array */
+ u32 array_size; /* # of u32 entries in array */
+ static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
+ 0x00000000, /* 31 - 0 Event id numbers */
+ 0x00000000, /* 63 - 32 */
+ 0x00000000, /* 95 - 64 */
+ 0x00000000, /* 127 - 96 */
+ 0x00000000, /* 159 - 128 */
+ 0x00000000, /* 191 - 160 */
+ 0x00000000, /* 223 - 192 */
+ 0x00000000, /* 255 - 224 */
+ 0x00000000, /* 287 - 256 */
+ 0x00000000, /* 319 - 288 */
+ 0x00000000, /* 351 - 320 */
+ 0x00000000, /* 383 - 352 */
+ 0x00000000, /* 415 - 384 */
+ 0x00000000, /* 447 - 416 */
+ 0x00000000, /* 479 - 448 */
+ 0x00000000, /* 511 - 480 */
+ 0x00000000, /* 543 - 512 */
+ 0x00000000, /* 575 - 544 */
+ 0x00000000, /* 607 - 576 */
+ 0x00000000, /* 639 - 608 */
+ 0x00000000, /* 671 - 640 */
+ 0x00000000, /* 703 - 672 */
+ 0x00000000, /* 735 - 704 */
+ 0x00000000, /* 767 - 736 */
+ 0x00000000, /* 799 - 768 */
+ 0x00000000, /* 831 - 800 */
+ 0x00000000, /* 863 - 832 */
+ 0x00000000, /* 895 - 864 */
+ 0x00000000, /* 927 - 896 */
+ 0x00000000, /* 959 - 928 */
+ 0x00000000, /* 991 - 960 */
+ 0x00000000, /* 1023 - 992 */
+ 0x00000000, /* 1055 - 1024 */
+ 0x00000000, /* 1087 - 1056 */
+ 0x00000000, /* 1119 - 1088 */
+ 0x00000000, /* 1151 - 1120 */
+ 0x00000000, /* 1183 - 1152 */
+ 0x00000000, /* 1215 - 1184 */
+ 0x00000000, /* 1247 - 1216 */
+ 0x00000000, /* 1279 - 1248 */
+ 0x00000000, /* 1311 - 1280 */
+ 0x00000000, /* 1343 - 1312 */
+ 0x00000000, /* 1375 - 1344 */
+ 0x00000000, /* 1407 - 1376 */
+ 0x00000000, /* 1439 - 1408 */
+ 0x00000000, /* 1471 - 1440 */
+ 0x00000000, /* 1503 - 1472 */
+ };
+
+ base = le32_to_cpu(il->card_alive.log_event_table_ptr);
+ if (!il3945_hw_valid_rtc_data_addr(base)) {
+ IL_ERR("Invalid event log pointer 0x%08X\n", base);
+ return;
+ }
+
+ disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
+ array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
+
+ if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
+ D_INFO("Disabling selected uCode log events at 0x%x\n",
+ disable_ptr);
+ for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
+ il_write_targ_mem(il,
+ disable_ptr + (i * sizeof(u32)),
+ evt_disable[i]);
+
+ } else {
+ D_INFO("Selected uCode log events may be disabled\n");
+ D_INFO(" by writing \"1\"s into disable bitmap\n");
+ D_INFO(" in SRAM at 0x%x, size %d u32s\n",
+ disable_ptr, array_size);
+ }
+
+}
+
+static int il3945_hwrate_to_plcp_idx(u8 plcp)
+{
+ int idx;
+
+ for (idx = 0; idx < RATE_COUNT_3945; idx++)
+ if (il3945_rates[idx].plcp == plcp)
+ return idx;
+ return -1;
+}
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
+
+static const char *il3945_get_tx_fail_reason(u32 status)
+{
+ switch (status & TX_STATUS_MSK) {
+ case TX_3945_STATUS_SUCCESS:
+ return "SUCCESS";
+ TX_STATUS_ENTRY(SHORT_LIMIT);
+ TX_STATUS_ENTRY(LONG_LIMIT);
+ TX_STATUS_ENTRY(FIFO_UNDERRUN);
+ TX_STATUS_ENTRY(MGMNT_ABORT);
+ TX_STATUS_ENTRY(NEXT_FRAG);
+ TX_STATUS_ENTRY(LIFE_EXPIRE);
+ TX_STATUS_ENTRY(DEST_PS);
+ TX_STATUS_ENTRY(ABORTED);
+ TX_STATUS_ENTRY(BT_RETRY);
+ TX_STATUS_ENTRY(STA_INVALID);
+ TX_STATUS_ENTRY(FRAG_DROPPED);
+ TX_STATUS_ENTRY(TID_DISABLE);
+ TX_STATUS_ENTRY(FRAME_FLUSHED);
+ TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
+ TX_STATUS_ENTRY(TX_LOCKED);
+ TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
+ }
+
+ return "UNKNOWN";
+}
+#else
+static inline const char *il3945_get_tx_fail_reason(u32 status)
+{
+ return "";
+}
+#endif
+
+/*
+ * get ieee prev rate from rate scale table.
+ * for A and B mode we need to overright prev
+ * value
+ */
+int il3945_rs_next_rate(struct il_priv *il, int rate)
+{
+ int next_rate = il3945_get_prev_ieee_rate(rate);
+
+ switch (il->band) {
+ case IEEE80211_BAND_5GHZ:
+ if (rate == RATE_12M_IDX)
+ next_rate = RATE_9M_IDX;
+ else if (rate == RATE_6M_IDX)
+ next_rate = RATE_6M_IDX;
+ break;
+ case IEEE80211_BAND_2GHZ:
+ if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
+ il_is_associated(il)) {
+ if (rate == RATE_11M_IDX)
+ next_rate = RATE_5M_IDX;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return next_rate;
+}
+
+
+/**
+ * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
+ *
+ * When FW advances 'R' idx, all entries between old and new 'R' idx
+ * need to be reclaimed. As result, some free space forms. If there is
+ * enough free space (> low mark), wake the stack that feeds us.
+ */
+static void il3945_tx_queue_reclaim(struct il_priv *il,
+ int txq_id, int idx)
+{
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct il_queue *q = &txq->q;
+ struct il_tx_info *tx_info;
+
+ BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
+
+ for (idx = il_queue_inc_wrap(idx, q->n_bd);
+ q->read_ptr != idx;
+ q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
+
+ tx_info = &txq->txb[txq->q.read_ptr];
+ ieee80211_tx_status_irqsafe(il->hw, tx_info->skb);
+ tx_info->skb = NULL;
+ il->cfg->ops->lib->txq_free_tfd(il, txq);
+ }
+
+ if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
+ txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
+ il_wake_queue(il, txq);
+}
+
+/**
+ * il3945_rx_reply_tx - Handle Tx response
+ */
+static void il3945_rx_reply_tx(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int idx = SEQ_TO_IDX(sequence);
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct ieee80211_tx_info *info;
+ struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le32_to_cpu(tx_resp->status);
+ int rate_idx;
+ int fail;
+
+ if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
+ "is out of range [0-%d] %d %d\n", txq_id,
+ idx, txq->q.n_bd, txq->q.write_ptr,
+ txq->q.read_ptr);
+ return;
+ }
+
+ txq->time_stamp = jiffies;
+ info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
+ ieee80211_tx_info_clear_status(info);
+
+ /* Fill the MRR chain with some info about on-chip retransmissions */
+ rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
+ if (info->band == IEEE80211_BAND_5GHZ)
+ rate_idx -= IL_FIRST_OFDM_RATE;
+
+ fail = tx_resp->failure_frame;
+
+ info->status.rates[0].idx = rate_idx;
+ info->status.rates[0].count = fail + 1; /* add final attempt */
+
+ /* tx_status->rts_retry_count = tx_resp->failure_rts; */
+ info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
+ IEEE80211_TX_STAT_ACK : 0;
+
+ D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
+ txq_id, il3945_get_tx_fail_reason(status), status,
+ tx_resp->rate, tx_resp->failure_frame);
+
+ D_TX_REPLY("Tx queue reclaim %d\n", idx);
+ il3945_tx_queue_reclaim(il, txq_id, idx);
+
+ if (status & TX_ABORT_REQUIRED_MSK)
+ IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
+}
+
+
+
+/*****************************************************************************
+ *
+ * Intel PRO/Wireless 3945ABG/BG Network Connection
+ *
+ * RX handler implementations
+ *
+ *****************************************************************************/
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+static void il3945_accumulative_stats(struct il_priv *il,
+ __le32 *stats)
+{
+ int i;
+ __le32 *prev_stats;
+ u32 *accum_stats;
+ u32 *delta, *max_delta;
+
+ prev_stats = (__le32 *)&il->_3945.stats;
+ accum_stats = (u32 *)&il->_3945.accum_stats;
+ delta = (u32 *)&il->_3945.delta_stats;
+ max_delta = (u32 *)&il->_3945.max_delta;
+
+ for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
+ i += sizeof(__le32), stats++, prev_stats++, delta++,
+ max_delta++, accum_stats++) {
+ if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
+ *delta = (le32_to_cpu(*stats) -
+ le32_to_cpu(*prev_stats));
+ *accum_stats += *delta;
+ if (*delta > *max_delta)
+ *max_delta = *delta;
+ }
+ }
+
+ /* reset accumulative stats for "no-counter" type stats */
+ il->_3945.accum_stats.general.temperature =
+ il->_3945.stats.general.temperature;
+ il->_3945.accum_stats.general.ttl_timestamp =
+ il->_3945.stats.general.ttl_timestamp;
+}
+#endif
+
+void il3945_hw_rx_stats(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+
+ D_RX("Statistics notification received (%d vs %d).\n",
+ (int)sizeof(struct il3945_notif_stats),
+ le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ il3945_accumulative_stats(il, (__le32 *)&pkt->u.raw);
+#endif
+
+ memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
+}
+
+void il3945_reply_stats(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ __le32 *flag = (__le32 *)&pkt->u.raw;
+
+ if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
+#ifdef CONFIG_IWLEGACY_DEBUGFS
+ memset(&il->_3945.accum_stats, 0,
+ sizeof(struct il3945_notif_stats));
+ memset(&il->_3945.delta_stats, 0,
+ sizeof(struct il3945_notif_stats));
+ memset(&il->_3945.max_delta, 0,
+ sizeof(struct il3945_notif_stats));
+#endif
+ D_RX("Statistics have been cleared\n");
+ }
+ il3945_hw_rx_stats(il, rxb);
+}
+
+
+/******************************************************************************
+ *
+ * Misc. internal state and helper functions
+ *
+ ******************************************************************************/
+
+/* This is necessary only for a number of stats, see the caller. */
+static int il3945_is_network_packet(struct il_priv *il,
+ struct ieee80211_hdr *header)
+{
+ /* Filter incoming packets to determine if they are targeted toward
+ * this network, discarding packets coming from ourselves */
+ switch (il->iw_mode) {
+ case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
+ /* packets to our IBSS update information */
+ return !compare_ether_addr(header->addr3, il->bssid);
+ case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
+ /* packets to our IBSS update information */
+ return !compare_ether_addr(header->addr2, il->bssid);
+ default:
+ return 1;
+ }
+}
+
+static void il3945_pass_packet_to_mac80211(struct il_priv *il,
+ struct il_rx_buf *rxb,
+ struct ieee80211_rx_status *stats)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
+ struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
+ struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
+ u16 len = le16_to_cpu(rx_hdr->len);
+ struct sk_buff *skb;
+ __le16 fc = hdr->frame_control;
+
+ /* We received data from the HW, so stop the watchdog */
+ if (unlikely(len + IL39_RX_FRAME_SIZE >
+ PAGE_SIZE << il->hw_params.rx_page_order)) {
+ D_DROP("Corruption detected!\n");
+ return;
+ }
+
+ /* We only process data packets if the interface is open */
+ if (unlikely(!il->is_open)) {
+ D_DROP(
+ "Dropping packet while interface is not open.\n");
+ return;
+ }
+
+ skb = dev_alloc_skb(128);
+ if (!skb) {
+ IL_ERR("dev_alloc_skb failed\n");
+ return;
+ }
+
+ if (!il3945_mod_params.sw_crypto)
+ il_set_decrypted_flag(il,
+ (struct ieee80211_hdr *)rxb_addr(rxb),
+ le32_to_cpu(rx_end->status), stats);
+
+ skb_add_rx_frag(skb, 0, rxb->page,
+ (void *)rx_hdr->payload - (void *)pkt, len);
+
+ il_update_stats(il, false, fc, len);
+ memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
+
+ ieee80211_rx(il->hw, skb);
+ il->alloc_rxb_page--;
+ rxb->page = NULL;
+}
+
+#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
+
+static void il3945_rx_reply_rx(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct ieee80211_hdr *header;
+ struct ieee80211_rx_status rx_status;
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
+ struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
+ struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
+ u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
+ u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
+ u8 network_packet;
+
+ rx_status.flag = 0;
+ rx_status.mactime = le64_to_cpu(rx_end->timestamp);
+ rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
+ IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
+ rx_status.freq =
+ ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
+ rx_status.band);
+
+ rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
+ if (rx_status.band == IEEE80211_BAND_5GHZ)
+ rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
+
+ rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
+ RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
+
+ /* set the preamble flag if appropriate */
+ if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
+ rx_status.flag |= RX_FLAG_SHORTPRE;
+
+ if ((unlikely(rx_stats->phy_count > 20))) {
+ D_DROP("dsp size out of range [0,20]: %d/n",
+ rx_stats->phy_count);
+ return;
+ }
+
+ if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
+ !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
+ D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
+ return;
+ }
+
+
+
+ /* Convert 3945's rssi indicator to dBm */
+ rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
+
+ D_STATS("Rssi %d sig_avg %d noise_diff %d\n",
+ rx_status.signal, rx_stats_sig_avg,
+ rx_stats_noise_diff);
+
+ header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
+
+ network_packet = il3945_is_network_packet(il, header);
+
+ D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
+ network_packet ? '*' : ' ',
+ le16_to_cpu(rx_hdr->channel),
+ rx_status.signal, rx_status.signal,
+ rx_status.rate_idx);
+
+ il_dbg_log_rx_data_frame(il, le16_to_cpu(rx_hdr->len),
+ header);
+
+ if (network_packet) {
+ il->_3945.last_beacon_time =
+ le32_to_cpu(rx_end->beacon_timestamp);
+ il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
+ il->_3945.last_rx_rssi = rx_status.signal;
+ }
+
+ il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
+}
+
+int il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il,
+ struct il_tx_queue *txq,
+ dma_addr_t addr, u16 len, u8 reset, u8 pad)
+{
+ int count;
+ struct il_queue *q;
+ struct il3945_tfd *tfd, *tfd_tmp;
+
+ q = &txq->q;
+ tfd_tmp = (struct il3945_tfd *)txq->tfds;
+ tfd = &tfd_tmp[q->write_ptr];
+
+ if (reset)
+ memset(tfd, 0, sizeof(*tfd));
+
+ count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
+
+ if (count >= NUM_TFD_CHUNKS || count < 0) {
+ IL_ERR("Error can not send more than %d chunks\n",
+ NUM_TFD_CHUNKS);
+ return -EINVAL;
+ }
+
+ tfd->tbs[count].addr = cpu_to_le32(addr);
+ tfd->tbs[count].len = cpu_to_le32(len);
+
+ count++;
+
+ tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
+ TFD_CTL_PAD_SET(pad));
+
+ return 0;
+}
+
+/**
+ * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
+ *
+ * Does NOT advance any idxes
+ */
+void il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
+{
+ struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
+ int idx = txq->q.read_ptr;
+ struct il3945_tfd *tfd = &tfd_tmp[idx];
+ struct pci_dev *dev = il->pci_dev;
+ int i;
+ int counter;
+
+ /* sanity check */
+ counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
+ if (counter > NUM_TFD_CHUNKS) {
+ IL_ERR("Too many chunks: %i\n", counter);
+ /* @todo issue fatal error, it is quite serious situation */
+ return;
+ }
+
+ /* Unmap tx_cmd */
+ if (counter)
+ pci_unmap_single(dev,
+ dma_unmap_addr(&txq->meta[idx], mapping),
+ dma_unmap_len(&txq->meta[idx], len),
+ PCI_DMA_TODEVICE);
+
+ /* unmap chunks if any */
+
+ for (i = 1; i < counter; i++)
+ pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
+ le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
+
+ /* free SKB */
+ if (txq->txb) {
+ struct sk_buff *skb;
+
+ skb = txq->txb[txq->q.read_ptr].skb;
+
+ /* can be called from irqs-disabled context */
+ if (skb) {
+ dev_kfree_skb_any(skb);
+ txq->txb[txq->q.read_ptr].skb = NULL;
+ }
+ }
+}
+
+/**
+ * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
+ *
+*/
+void il3945_hw_build_tx_cmd_rate(struct il_priv *il,
+ struct il_device_cmd *cmd,
+ struct ieee80211_tx_info *info,
+ struct ieee80211_hdr *hdr,
+ int sta_id, int tx_id)
+{
+ u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
+ u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945);
+ u16 rate_mask;
+ int rate;
+ u8 rts_retry_limit;
+ u8 data_retry_limit;
+ __le32 tx_flags;
+ __le16 fc = hdr->frame_control;
+ struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
+
+ rate = il3945_rates[rate_idx].plcp;
+ tx_flags = tx_cmd->tx_flags;
+
+ /* We need to figure out how to get the sta->supp_rates while
+ * in this running context */
+ rate_mask = RATES_MASK_3945;
+
+ /* Set retry limit on DATA packets and Probe Responses*/
+ if (ieee80211_is_probe_resp(fc))
+ data_retry_limit = 3;
+ else
+ data_retry_limit = IL_DEFAULT_TX_RETRY;
+ tx_cmd->data_retry_limit = data_retry_limit;
+
+ if (tx_id >= IL39_CMD_QUEUE_NUM)
+ rts_retry_limit = 3;
+ else
+ rts_retry_limit = 7;
+
+ if (data_retry_limit < rts_retry_limit)
+ rts_retry_limit = data_retry_limit;
+ tx_cmd->rts_retry_limit = rts_retry_limit;
+
+ tx_cmd->rate = rate;
+ tx_cmd->tx_flags = tx_flags;
+
+ /* OFDM */
+ tx_cmd->supp_rates[0] =
+ ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
+
+ /* CCK */
+ tx_cmd->supp_rates[1] = (rate_mask & 0xF);
+
+ D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
+ "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
+ tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
+ tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
+}
+
+static u8 il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
+{
+ unsigned long flags_spin;
+ struct il_station_entry *station;
+
+ if (sta_id == IL_INVALID_STATION)
+ return IL_INVALID_STATION;
+
+ spin_lock_irqsave(&il->sta_lock, flags_spin);
+ station = &il->stations[sta_id];
+
+ station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
+ station->sta.rate_n_flags = cpu_to_le16(tx_rate);
+ station->sta.mode = STA_CONTROL_MODIFY_MSK;
+ il_send_add_sta(il, &station->sta, CMD_ASYNC);
+ spin_unlock_irqrestore(&il->sta_lock, flags_spin);
+
+ D_RATE("SCALE sync station %d to rate %d\n",
+ sta_id, tx_rate);
+ return sta_id;
+}
+
+static void il3945_set_pwr_vmain(struct il_priv *il)
+{
+/*
+ * (for documentation purposes)
+ * to set power to V_AUX, do
+
+ if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+
+ _il_poll_bit(il, CSR_GPIO_IN,
+ CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000);
+ }
+ */
+
+ il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
+ ~APMG_PS_CTRL_MSK_PWR_SRC);
+
+ _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
+ CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
+}
+
+static int il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
+{
+ il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
+ il_wr(il, FH39_RCSR_RPTR_ADDR(0),
+ rxq->rb_stts_dma);
+ il_wr(il, FH39_RCSR_WPTR(0), 0);
+ il_wr(il, FH39_RCSR_CONFIG(0),
+ FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
+ FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
+ FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
+ FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
+ (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
+ FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
+ (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
+ FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
+
+ /* fake read to flush all prev I/O */
+ il_rd(il, FH39_RSSR_CTRL);
+
+ return 0;
+}
+
+static int il3945_tx_reset(struct il_priv *il)
+{
+
+ /* bypass mode */
+ il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
+
+ /* RA 0 is active */
+ il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
+
+ /* all 6 fifo are active */
+ il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
+
+ il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
+ il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
+ il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
+ il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
+
+ il_wr(il, FH39_TSSR_CBB_BASE,
+ il->_3945.shared_phys);
+
+ il_wr(il, FH39_TSSR_MSG_CONFIG,
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
+ FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
+
+
+ return 0;
+}
+
+/**
+ * il3945_txq_ctx_reset - Reset TX queue context
+ *
+ * Destroys all DMA structures and initialize them again
+ */
+static int il3945_txq_ctx_reset(struct il_priv *il)
+{
+ int rc;
+ int txq_id, slots_num;
+
+ il3945_hw_txq_ctx_free(il);
+
+ /* allocate tx queue structure */
+ rc = il_alloc_txq_mem(il);
+ if (rc)
+ return rc;
+
+ /* Tx CMD queue */
+ rc = il3945_tx_reset(il);
+ if (rc)
+ goto error;
+
+ /* Tx queue(s) */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
+ slots_num = (txq_id == IL39_CMD_QUEUE_NUM) ?
+ TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
+ rc = il_tx_queue_init(il, &il->txq[txq_id],
+ slots_num, txq_id);
+ if (rc) {
+ IL_ERR("Tx %d queue init failed\n", txq_id);
+ goto error;
+ }
+ }
+
+ return rc;
+
+ error:
+ il3945_hw_txq_ctx_free(il);
+ return rc;
+}
+
+
+/*
+ * Start up 3945's basic functionality after it has been reset
+ * (e.g. after platform boot, or shutdown via il_apm_stop())
+ * NOTE: This does not load uCode nor start the embedded processor
+ */
+static int il3945_apm_init(struct il_priv *il)
+{
+ int ret = il_apm_init(il);
+
+ /* Clear APMG (NIC's internal power management) interrupts */
+ il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
+ il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
+
+ /* Reset radio chip */
+ il_set_bits_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+ udelay(5);
+ il_clear_bits_prph(il, APMG_PS_CTRL_REG,
+ APMG_PS_CTRL_VAL_RESET_REQ);
+
+ return ret;
+}
+
+static void il3945_nic_config(struct il_priv *il)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ unsigned long flags;
+ u8 rev_id = il->pci_dev->revision;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Determine HW type */
+ D_INFO("HW Revision ID = 0x%X\n", rev_id);
+
+ if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
+ D_INFO("RTP type\n");
+ else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
+ D_INFO("3945 RADIO-MB type\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
+ } else {
+ D_INFO("3945 RADIO-MM type\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
+ }
+
+ if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
+ D_INFO("SKU OP mode is mrc\n");
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
+ } else
+ D_INFO("SKU OP mode is basic\n");
+
+ if ((eeprom->board_revision & 0xF0) == 0xD0) {
+ D_INFO("3945ABG revision is 0x%X\n",
+ eeprom->board_revision);
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ } else {
+ D_INFO("3945ABG revision is 0x%X\n",
+ eeprom->board_revision);
+ il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
+ }
+
+ if (eeprom->almgor_m_version <= 1) {
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
+ D_INFO("Card M type A version is 0x%X\n",
+ eeprom->almgor_m_version);
+ } else {
+ D_INFO("Card M type B version is 0x%X\n",
+ eeprom->almgor_m_version);
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
+ }
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
+ D_RF_KILL("SW RF KILL supported in EEPROM.\n");
+
+ if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
+ D_RF_KILL("HW RF KILL supported in EEPROM.\n");
+}
+
+int il3945_hw_nic_init(struct il_priv *il)
+{
+ int rc;
+ unsigned long flags;
+ struct il_rx_queue *rxq = &il->rxq;
+
+ spin_lock_irqsave(&il->lock, flags);
+ il->cfg->ops->lib->apm_ops.init(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il3945_set_pwr_vmain(il);
+
+ il->cfg->ops->lib->apm_ops.config(il);
+
+ /* Allocate the RX queue, or reset if it is already allocated */
+ if (!rxq->bd) {
+ rc = il_rx_queue_alloc(il);
+ if (rc) {
+ IL_ERR("Unable to initialize Rx queue\n");
+ return -ENOMEM;
+ }
+ } else
+ il3945_rx_queue_reset(il, rxq);
+
+ il3945_rx_replenish(il);
+
+ il3945_rx_init(il, rxq);
+
+
+ /* Look at using this instead:
+ rxq->need_update = 1;
+ il_rx_queue_update_write_ptr(il, rxq);
+ */
+
+ il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
+
+ rc = il3945_txq_ctx_reset(il);
+ if (rc)
+ return rc;
+
+ set_bit(STATUS_INIT, &il->status);
+
+ return 0;
+}
+
+/**
+ * il3945_hw_txq_ctx_free - Free TXQ Context
+ *
+ * Destroy all TX DMA queues and structures
+ */
+void il3945_hw_txq_ctx_free(struct il_priv *il)
+{
+ int txq_id;
+
+ /* Tx queues */
+ if (il->txq)
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num;
+ txq_id++)
+ if (txq_id == IL39_CMD_QUEUE_NUM)
+ il_cmd_queue_free(il);
+ else
+ il_tx_queue_free(il, txq_id);
+
+ /* free tx queue structure */
+ il_txq_mem(il);
+}
+
+void il3945_hw_txq_ctx_stop(struct il_priv *il)
+{
+ int txq_id;
+
+ /* stop SCD */
+ il_wr_prph(il, ALM_SCD_MODE_REG, 0);
+ il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
+
+ /* reset TFD queues */
+ for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
+ il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
+ il_poll_bit(il, FH39_TSSR_TX_STATUS,
+ FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
+ 1000);
+ }
+
+ il3945_hw_txq_ctx_free(il);
+}
+
+/**
+ * il3945_hw_reg_adjust_power_by_temp
+ * return idx delta into power gain settings table
+*/
+static int il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
+{
+ return (new_reading - old_reading) * (-11) / 100;
+}
+
+/**
+ * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
+ */
+static inline int il3945_hw_reg_temp_out_of_range(int temperature)
+{
+ return (temperature < -260 || temperature > 25) ? 1 : 0;
+}
+
+int il3945_hw_get_temperature(struct il_priv *il)
+{
+ return _il_rd(il, CSR_UCODE_DRV_GP2);
+}
+
+/**
+ * il3945_hw_reg_txpower_get_temperature
+ * get the current temperature by reading from NIC
+*/
+static int il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int temperature;
+
+ temperature = il3945_hw_get_temperature(il);
+
+ /* driver's okay range is -260 to +25.
+ * human readable okay range is 0 to +285 */
+ D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
+
+ /* handle insane temp reading */
+ if (il3945_hw_reg_temp_out_of_range(temperature)) {
+ IL_ERR("Error bad temperature value %d\n", temperature);
+
+ /* if really really hot(?),
+ * substitute the 3rd band/group's temp measured at factory */
+ if (il->last_temperature > 100)
+ temperature = eeprom->groups[2].temperature;
+ else /* else use most recent "sane" value from driver */
+ temperature = il->last_temperature;
+ }
+
+ return temperature; /* raw, not "human readable" */
+}
+
+/* Adjust Txpower only if temperature variance is greater than threshold.
+ *
+ * Both are lower than older versions' 9 degrees */
+#define IL_TEMPERATURE_LIMIT_TIMER 6
+
+/**
+ * il3945_is_temp_calib_needed - determines if new calibration is needed
+ *
+ * records new temperature in tx_mgr->temperature.
+ * replaces tx_mgr->last_temperature *only* if calib needed
+ * (assumes caller will actually do the calibration!). */
+static int il3945_is_temp_calib_needed(struct il_priv *il)
+{
+ int temp_diff;
+
+ il->temperature = il3945_hw_reg_txpower_get_temperature(il);
+ temp_diff = il->temperature - il->last_temperature;
+
+ /* get absolute value */
+ if (temp_diff < 0) {
+ D_POWER("Getting cooler, delta %d,\n", temp_diff);
+ temp_diff = -temp_diff;
+ } else if (temp_diff == 0)
+ D_POWER("Same temp,\n");
+ else
+ D_POWER("Getting warmer, delta %d,\n", temp_diff);
+
+ /* if we don't need calibration, *don't* update last_temperature */
+ if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
+ D_POWER("Timed thermal calib not needed\n");
+ return 0;
+ }
+
+ D_POWER("Timed thermal calib needed\n");
+
+ /* assume that caller will actually do calib ...
+ * update the "last temperature" value */
+ il->last_temperature = il->temperature;
+ return 1;
+}
+
+#define IL_MAX_GAIN_ENTRIES 78
+#define IL_CCK_FROM_OFDM_POWER_DIFF -5
+#define IL_CCK_FROM_OFDM_IDX_DIFF (10)
+
+/* radio and DSP power table, each step is 1/2 dB.
+ * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
+static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
+ {
+ {251, 127}, /* 2.4 GHz, highest power */
+ {251, 127},
+ {251, 127},
+ {251, 127},
+ {251, 125},
+ {251, 110},
+ {251, 105},
+ {251, 98},
+ {187, 125},
+ {187, 115},
+ {187, 108},
+ {187, 99},
+ {243, 119},
+ {243, 111},
+ {243, 105},
+ {243, 97},
+ {243, 92},
+ {211, 106},
+ {211, 100},
+ {179, 120},
+ {179, 113},
+ {179, 107},
+ {147, 125},
+ {147, 119},
+ {147, 112},
+ {147, 106},
+ {147, 101},
+ {147, 97},
+ {147, 91},
+ {115, 107},
+ {235, 121},
+ {235, 115},
+ {235, 109},
+ {203, 127},
+ {203, 121},
+ {203, 115},
+ {203, 108},
+ {203, 102},
+ {203, 96},
+ {203, 92},
+ {171, 110},
+ {171, 104},
+ {171, 98},
+ {139, 116},
+ {227, 125},
+ {227, 119},
+ {227, 113},
+ {227, 107},
+ {227, 101},
+ {227, 96},
+ {195, 113},
+ {195, 106},
+ {195, 102},
+ {195, 95},
+ {163, 113},
+ {163, 106},
+ {163, 102},
+ {163, 95},
+ {131, 113},
+ {131, 106},
+ {131, 102},
+ {131, 95},
+ {99, 113},
+ {99, 106},
+ {99, 102},
+ {99, 95},
+ {67, 113},
+ {67, 106},
+ {67, 102},
+ {67, 95},
+ {35, 113},
+ {35, 106},
+ {35, 102},
+ {35, 95},
+ {3, 113},
+ {3, 106},
+ {3, 102},
+ {3, 95} }, /* 2.4 GHz, lowest power */
+ {
+ {251, 127}, /* 5.x GHz, highest power */
+ {251, 120},
+ {251, 114},
+ {219, 119},
+ {219, 101},
+ {187, 113},
+ {187, 102},
+ {155, 114},
+ {155, 103},
+ {123, 117},
+ {123, 107},
+ {123, 99},
+ {123, 92},
+ {91, 108},
+ {59, 125},
+ {59, 118},
+ {59, 109},
+ {59, 102},
+ {59, 96},
+ {59, 90},
+ {27, 104},
+ {27, 98},
+ {27, 92},
+ {115, 118},
+ {115, 111},
+ {115, 104},
+ {83, 126},
+ {83, 121},
+ {83, 113},
+ {83, 105},
+ {83, 99},
+ {51, 118},
+ {51, 111},
+ {51, 104},
+ {51, 98},
+ {19, 116},
+ {19, 109},
+ {19, 102},
+ {19, 98},
+ {19, 93},
+ {171, 113},
+ {171, 107},
+ {171, 99},
+ {139, 120},
+ {139, 113},
+ {139, 107},
+ {139, 99},
+ {107, 120},
+ {107, 113},
+ {107, 107},
+ {107, 99},
+ {75, 120},
+ {75, 113},
+ {75, 107},
+ {75, 99},
+ {43, 120},
+ {43, 113},
+ {43, 107},
+ {43, 99},
+ {11, 120},
+ {11, 113},
+ {11, 107},
+ {11, 99},
+ {131, 107},
+ {131, 99},
+ {99, 120},
+ {99, 113},
+ {99, 107},
+ {99, 99},
+ {67, 120},
+ {67, 113},
+ {67, 107},
+ {67, 99},
+ {35, 120},
+ {35, 113},
+ {35, 107},
+ {35, 99},
+ {3, 120} } /* 5.x GHz, lowest power */
+};
+
+static inline u8 il3945_hw_reg_fix_power_idx(int idx)
+{
+ if (idx < 0)
+ return 0;
+ if (idx >= IL_MAX_GAIN_ENTRIES)
+ return IL_MAX_GAIN_ENTRIES - 1;
+ return (u8) idx;
+}
+
+/* Kick off thermal recalibration check every 60 seconds */
+#define REG_RECALIB_PERIOD (60)
+
+/**
+ * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
+ *
+ * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
+ * or 6 Mbit (OFDM) rates.
+ */
+static void il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx,
+ s32 rate_idx, const s8 *clip_pwrs,
+ struct il_channel_info *ch_info,
+ int band_idx)
+{
+ struct il3945_scan_power_info *scan_power_info;
+ s8 power;
+ u8 power_idx;
+
+ scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
+
+ /* use this channel group's 6Mbit clipping/saturation pwr,
+ * but cap at regulatory scan power restriction (set during init
+ * based on eeprom channel data) for this channel. */
+ power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
+
+ power = min(power, il->tx_power_user_lmt);
+ scan_power_info->requested_power = power;
+
+ /* find difference between new scan *power* and current "normal"
+ * Tx *power* for 6Mb. Use this difference (x2) to adjust the
+ * current "normal" temperature-compensated Tx power *idx* for
+ * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
+ * *idx*. */
+ power_idx = ch_info->power_info[rate_idx].power_table_idx
+ - (power - ch_info->power_info
+ [RATE_6M_IDX_TBL].requested_power) * 2;
+
+ /* store reference idx that we use when adjusting *all* scan
+ * powers. So we can accommodate user (all channel) or spectrum
+ * management (single channel) power changes "between" temperature
+ * feedback compensation procedures.
+ * don't force fit this reference idx into gain table; it may be a
+ * negative number. This will help avoid errors when we're at
+ * the lower bounds (highest gains, for warmest temperatures)
+ * of the table. */
+
+ /* don't exceed table bounds for "real" setting */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+
+ scan_power_info->power_table_idx = power_idx;
+ scan_power_info->tpc.tx_gain =
+ power_gain_table[band_idx][power_idx].tx_gain;
+ scan_power_info->tpc.dsp_atten =
+ power_gain_table[band_idx][power_idx].dsp_atten;
+}
+
+/**
+ * il3945_send_tx_power - fill in Tx Power command with gain settings
+ *
+ * Configures power settings for all rates for the current channel,
+ * using values from channel info struct, and send to NIC
+ */
+static int il3945_send_tx_power(struct il_priv *il)
+{
+ int rate_idx, i;
+ const struct il_channel_info *ch_info = NULL;
+ struct il3945_txpowertable_cmd txpower = {
+ .channel = il->ctx.active.channel,
+ };
+ u16 chan;
+
+ if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
+ "TX Power requested while scanning!\n"))
+ return -EAGAIN;
+
+ chan = le16_to_cpu(il->ctx.active.channel);
+
+ txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
+ ch_info = il_get_channel_info(il, il->band, chan);
+ if (!ch_info) {
+ IL_ERR(
+ "Failed to get channel info for channel %d [%d]\n",
+ chan, il->band);
+ return -EINVAL;
+ }
+
+ if (!il_is_channel_valid(ch_info)) {
+ D_POWER("Not calling TX_PWR_TBL_CMD on "
+ "non-Tx channel.\n");
+ return 0;
+ }
+
+ /* fill cmd with power settings for all rates for current channel */
+ /* Fill OFDM rate */
+ for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
+ rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
+
+ txpower.power[i].tpc = ch_info->power_info[i].tpc;
+ txpower.power[i].rate = il3945_rates[rate_idx].plcp;
+
+ D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+ le16_to_cpu(txpower.channel),
+ txpower.band,
+ txpower.power[i].tpc.tx_gain,
+ txpower.power[i].tpc.dsp_atten,
+ txpower.power[i].rate);
+ }
+ /* Fill CCK rates */
+ for (rate_idx = IL_FIRST_CCK_RATE;
+ rate_idx <= IL_LAST_CCK_RATE; rate_idx++, i++) {
+ txpower.power[i].tpc = ch_info->power_info[i].tpc;
+ txpower.power[i].rate = il3945_rates[rate_idx].plcp;
+
+ D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
+ le16_to_cpu(txpower.channel),
+ txpower.band,
+ txpower.power[i].tpc.tx_gain,
+ txpower.power[i].tpc.dsp_atten,
+ txpower.power[i].rate);
+ }
+
+ return il_send_cmd_pdu(il, REPLY_TX_PWR_TBL_CMD,
+ sizeof(struct il3945_txpowertable_cmd),
+ &txpower);
+
+}
+
+/**
+ * il3945_hw_reg_set_new_power - Configures power tables at new levels
+ * @ch_info: Channel to update. Uses power_info.requested_power.
+ *
+ * Replace requested_power and base_power_idx ch_info fields for
+ * one channel.
+ *
+ * Called if user or spectrum management changes power preferences.
+ * Takes into account h/w and modulation limitations (clip power).
+ *
+ * This does *not* send anything to NIC, just sets up ch_info for one channel.
+ *
+ * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
+ * properly fill out the scan powers, and actual h/w gain settings,
+ * and send changes to NIC
+ */
+static int il3945_hw_reg_set_new_power(struct il_priv *il,
+ struct il_channel_info *ch_info)
+{
+ struct il3945_channel_power_info *power_info;
+ int power_changed = 0;
+ int i;
+ const s8 *clip_pwrs;
+ int power;
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* Get this channel's rate-to-current-power settings table */
+ power_info = ch_info->power_info;
+
+ /* update OFDM Txpower settings */
+ for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL;
+ i++, ++power_info) {
+ int delta_idx;
+
+ /* limit new power to be no more than h/w capability */
+ power = min(ch_info->curr_txpow, clip_pwrs[i]);
+ if (power == power_info->requested_power)
+ continue;
+
+ /* find difference between old and new requested powers,
+ * update base (non-temp-compensated) power idx */
+ delta_idx = (power - power_info->requested_power) * 2;
+ power_info->base_power_idx -= delta_idx;
+
+ /* save new requested power value */
+ power_info->requested_power = power;
+
+ power_changed = 1;
+ }
+
+ /* update CCK Txpower settings, based on OFDM 12M setting ...
+ * ... all CCK power settings for a given channel are the *same*. */
+ if (power_changed) {
+ power =
+ ch_info->power_info[RATE_12M_IDX_TBL].
+ requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
+
+ /* do all CCK rates' il3945_channel_power_info structures */
+ for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
+ power_info->requested_power = power;
+ power_info->base_power_idx =
+ ch_info->power_info[RATE_12M_IDX_TBL].
+ base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
+ ++power_info;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
+ *
+ * NOTE: Returned power limit may be less (but not more) than requested,
+ * based strictly on regulatory (eeprom and spectrum mgt) limitations
+ * (no consideration for h/w clipping limitations).
+ */
+static int il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
+{
+ s8 max_power;
+
+#if 0
+ /* if we're using TGd limits, use lower of TGd or EEPROM */
+ if (ch_info->tgd_data.max_power != 0)
+ max_power = min(ch_info->tgd_data.max_power,
+ ch_info->eeprom.max_power_avg);
+
+ /* else just use EEPROM limits */
+ else
+#endif
+ max_power = ch_info->eeprom.max_power_avg;
+
+ return min(max_power, ch_info->max_power_avg);
+}
+
+/**
+ * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
+ *
+ * Compensate txpower settings of *all* channels for temperature.
+ * This only accounts for the difference between current temperature
+ * and the factory calibration temperatures, and bases the new settings
+ * on the channel's base_power_idx.
+ *
+ * If RxOn is "associated", this sends the new Txpower to NIC!
+ */
+static int il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
+{
+ struct il_channel_info *ch_info = NULL;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int delta_idx;
+ const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
+ u8 a_band;
+ u8 rate_idx;
+ u8 scan_tbl_idx;
+ u8 i;
+ int ref_temp;
+ int temperature = il->temperature;
+
+ if (il->disable_tx_power_cal ||
+ test_bit(STATUS_SCANNING, &il->status)) {
+ /* do not perform tx power calibration */
+ return 0;
+ }
+ /* set up new Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0; i < il->channel_count; i++) {
+ ch_info = &il->channel_info[i];
+ a_band = il_is_channel_a_band(ch_info);
+
+ /* Get this chnlgrp's factory calibration temperature */
+ ref_temp = (s16)eeprom->groups[ch_info->group_idx].
+ temperature;
+
+ /* get power idx adjustment based on current and factory
+ * temps */
+ delta_idx = il3945_hw_reg_adjust_power_by_temp(temperature,
+ ref_temp);
+
+ /* set tx power value for all rates, OFDM and CCK */
+ for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
+ rate_idx++) {
+ int power_idx =
+ ch_info->power_info[rate_idx].base_power_idx;
+
+ /* temperature compensate */
+ power_idx += delta_idx;
+
+ /* stay within table range */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+ ch_info->power_info[rate_idx].
+ power_table_idx = (u8) power_idx;
+ ch_info->power_info[rate_idx].tpc =
+ power_gain_table[a_band][power_idx];
+ }
+
+ /* Get this chnlgrp's rate-to-max/clip-powers table */
+ clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_idx = 0;
+ scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
+ s32 actual_idx = (scan_tbl_idx == 0) ?
+ RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
+ il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
+ actual_idx, clip_pwrs,
+ ch_info, a_band);
+ }
+ }
+
+ /* send Txpower command for current channel to ucode */
+ return il->cfg->ops->lib->send_tx_power(il);
+}
+
+int il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
+{
+ struct il_channel_info *ch_info;
+ s8 max_power;
+ u8 a_band;
+ u8 i;
+
+ if (il->tx_power_user_lmt == power) {
+ D_POWER("Requested Tx power same as current "
+ "limit: %ddBm.\n", power);
+ return 0;
+ }
+
+ D_POWER("Setting upper limit clamp to %ddBm.\n", power);
+ il->tx_power_user_lmt = power;
+
+ /* set up new Tx powers for each and every channel, 2.4 and 5.x */
+
+ for (i = 0; i < il->channel_count; i++) {
+ ch_info = &il->channel_info[i];
+ a_band = il_is_channel_a_band(ch_info);
+
+ /* find minimum power of all user and regulatory constraints
+ * (does not consider h/w clipping limitations) */
+ max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
+ max_power = min(power, max_power);
+ if (max_power != ch_info->curr_txpow) {
+ ch_info->curr_txpow = max_power;
+
+ /* this considers the h/w clipping limitations */
+ il3945_hw_reg_set_new_power(il, ch_info);
+ }
+ }
+
+ /* update txpower settings for all channels,
+ * send to NIC if associated. */
+ il3945_is_temp_calib_needed(il);
+ il3945_hw_reg_comp_txpower_temp(il);
+
+ return 0;
+}
+
+static int il3945_send_rxon_assoc(struct il_priv *il,
+ struct il_rxon_context *ctx)
+{
+ int rc = 0;
+ struct il_rx_pkt *pkt;
+ struct il3945_rxon_assoc_cmd rxon_assoc;
+ struct il_host_cmd cmd = {
+ .id = REPLY_RXON_ASSOC,
+ .len = sizeof(rxon_assoc),
+ .flags = CMD_WANT_SKB,
+ .data = &rxon_assoc,
+ };
+ const struct il_rxon_cmd *rxon1 = &ctx->staging;
+ const struct il_rxon_cmd *rxon2 = &ctx->active;
+
+ if (rxon1->flags == rxon2->flags &&
+ rxon1->filter_flags == rxon2->filter_flags &&
+ rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
+ rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
+ D_INFO("Using current RXON_ASSOC. Not resending.\n");
+ return 0;
+ }
+
+ rxon_assoc.flags = ctx->staging.flags;
+ rxon_assoc.filter_flags = ctx->staging.filter_flags;
+ rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
+ rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
+ rxon_assoc.reserved = 0;
+
+ rc = il_send_cmd_sync(il, &cmd);
+ if (rc)
+ return rc;
+
+ pkt = (struct il_rx_pkt *)cmd.reply_page;
+ if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
+ IL_ERR("Bad return from REPLY_RXON_ASSOC command\n");
+ rc = -EIO;
+ }
+
+ il_free_pages(il, cmd.reply_page);
+
+ return rc;
+}
+
+/**
+ * il3945_commit_rxon - commit staging_rxon to hardware
+ *
+ * The RXON command in staging_rxon is committed to the hardware and
+ * the active_rxon structure is updated with the new data. This
+ * function correctly transitions out of the RXON_ASSOC_MSK state if
+ * a HW tune is required based on the RXON structure changes.
+ */
+int il3945_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx)
+{
+ /* cast away the const for active_rxon in this function */
+ struct il3945_rxon_cmd *active_rxon = (void *)&ctx->active;
+ struct il3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
+ int rc = 0;
+ bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return -EINVAL;
+
+ if (!il_is_alive(il))
+ return -1;
+
+ /* always get timestamp with Rx frame */
+ staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
+
+ /* select antenna */
+ staging_rxon->flags &=
+ ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
+ staging_rxon->flags |= il3945_get_antenna_flags(il);
+
+ rc = il_check_rxon_cmd(il, ctx);
+ if (rc) {
+ IL_ERR("Invalid RXON configuration. Not committing.\n");
+ return -EINVAL;
+ }
+
+ /* If we don't need to send a full RXON, we can use
+ * il3945_rxon_assoc_cmd which is used to reconfigure filter
+ * and other flags for the current radio configuration. */
+ if (!il_full_rxon_required(il,
+ &il->ctx)) {
+ rc = il_send_rxon_assoc(il,
+ &il->ctx);
+ if (rc) {
+ IL_ERR("Error setting RXON_ASSOC "
+ "configuration (%d).\n", rc);
+ return rc;
+ }
+
+ memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if tx power changed.
+ */
+ il_set_tx_power(il, il->tx_power_next, false);
+ return 0;
+ }
+
+ /* If we are currently associated and the new config requires
+ * an RXON_ASSOC and the new config wants the associated mask enabled,
+ * we must clear the associated from the active configuration
+ * before we apply the new config */
+ if (il_is_associated(il) && new_assoc) {
+ D_INFO("Toggling associated bit on current RXON\n");
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+ /*
+ * reserved4 and 5 could have been filled by the iwlcore code.
+ * Let's clear them before pushing to the 3945.
+ */
+ active_rxon->reserved4 = 0;
+ active_rxon->reserved5 = 0;
+ rc = il_send_cmd_pdu(il, REPLY_RXON,
+ sizeof(struct il3945_rxon_cmd),
+ &il->ctx.active);
+
+ /* If the mask clearing failed then we set
+ * active_rxon back to what it was previously */
+ if (rc) {
+ active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+ IL_ERR("Error clearing ASSOC_MSK on current "
+ "configuration (%d).\n", rc);
+ return rc;
+ }
+ il_clear_ucode_stations(il,
+ &il->ctx);
+ il_restore_stations(il,
+ &il->ctx);
+ }
+
+ D_INFO("Sending RXON\n"
+ "* with%s RXON_FILTER_ASSOC_MSK\n"
+ "* channel = %d\n"
+ "* bssid = %pM\n",
+ (new_assoc ? "" : "out"),
+ le16_to_cpu(staging_rxon->channel),
+ staging_rxon->bssid_addr);
+
+ /*
+ * reserved4 and 5 could have been filled by the iwlcore code.
+ * Let's clear them before pushing to the 3945.
+ */
+ staging_rxon->reserved4 = 0;
+ staging_rxon->reserved5 = 0;
+
+ il_set_rxon_hwcrypto(il, ctx, !il3945_mod_params.sw_crypto);
+
+ /* Apply the new configuration */
+ rc = il_send_cmd_pdu(il, REPLY_RXON,
+ sizeof(struct il3945_rxon_cmd),
+ staging_rxon);
+ if (rc) {
+ IL_ERR("Error setting new configuration (%d).\n", rc);
+ return rc;
+ }
+
+ memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
+
+ if (!new_assoc) {
+ il_clear_ucode_stations(il,
+ &il->ctx);
+ il_restore_stations(il,
+ &il->ctx);
+ }
+
+ /* If we issue a new RXON command which required a tune then we must
+ * send a new TXPOWER command or we won't be able to Tx any frames */
+ rc = il_set_tx_power(il, il->tx_power_next, true);
+ if (rc) {
+ IL_ERR("Error setting Tx power (%d).\n", rc);
+ return rc;
+ }
+
+ /* Init the hardware's rate fallback order based on the band */
+ rc = il3945_init_hw_rate_table(il);
+ if (rc) {
+ IL_ERR("Error setting HW rate table: %02X\n", rc);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+/**
+ * il3945_reg_txpower_periodic - called when time to check our temperature.
+ *
+ * -- reset periodic timer
+ * -- see if temp has changed enough to warrant re-calibration ... if so:
+ * -- correct coeffs for temp (can reset temp timer)
+ * -- save this temp as "last",
+ * -- send new set of gain settings to NIC
+ * NOTE: This should continue working, even when we're not associated,
+ * so we can keep our internal table of scan powers current. */
+void il3945_reg_txpower_periodic(struct il_priv *il)
+{
+ /* This will kick in the "brute force"
+ * il3945_hw_reg_comp_txpower_temp() below */
+ if (!il3945_is_temp_calib_needed(il))
+ goto reschedule;
+
+ /* Set up a new set of temp-adjusted TxPowers, send to NIC.
+ * This is based *only* on current temperature,
+ * ignoring any previous power measurements */
+ il3945_hw_reg_comp_txpower_temp(il);
+
+ reschedule:
+ queue_delayed_work(il->workqueue,
+ &il->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
+}
+
+static void il3945_bg_reg_txpower_periodic(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ _3945.thermal_periodic.work);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ mutex_lock(&il->mutex);
+ il3945_reg_txpower_periodic(il);
+ mutex_unlock(&il->mutex);
+}
+
+/**
+ * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4)
+ * for the channel.
+ *
+ * This function is used when initializing channel-info structs.
+ *
+ * NOTE: These channel groups do *NOT* match the bands above!
+ * These channel groups are based on factory-tested channels;
+ * on A-band, EEPROM's "group frequency" entries represent the top
+ * channel in each group 1-4. Group 5 All B/G channels are in group 0.
+ */
+static u16 il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
+ const struct il_channel_info *ch_info)
+{
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
+ u8 group;
+ u16 group_idx = 0; /* based on factory calib frequencies */
+ u8 grp_channel;
+
+ /* Find the group idx for the channel ... don't use idx 1(?) */
+ if (il_is_channel_a_band(ch_info)) {
+ for (group = 1; group < 5; group++) {
+ grp_channel = ch_grp[group].group_channel;
+ if (ch_info->channel <= grp_channel) {
+ group_idx = group;
+ break;
+ }
+ }
+ /* group 4 has a few channels *above* its factory cal freq */
+ if (group == 5)
+ group_idx = 4;
+ } else
+ group_idx = 0; /* 2.4 GHz, group 0 */
+
+ D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
+ group_idx);
+ return group_idx;
+}
+
+/**
+ * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
+ *
+ * Interpolate to get nominal (i.e. at factory calibration temperature) idx
+ * into radio/DSP gain settings table for requested power.
+ */
+static int il3945_hw_reg_get_matched_power_idx(struct il_priv *il,
+ s8 requested_power,
+ s32 setting_idx, s32 *new_idx)
+{
+ const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ s32 idx0, idx1;
+ s32 power = 2 * requested_power;
+ s32 i;
+ const struct il3945_eeprom_txpower_sample *samples;
+ s32 gains0, gains1;
+ s32 res;
+ s32 denominator;
+
+ chnl_grp = &eeprom->groups[setting_idx];
+ samples = chnl_grp->samples;
+ for (i = 0; i < 5; i++) {
+ if (power == samples[i].power) {
+ *new_idx = samples[i].gain_idx;
+ return 0;
+ }
+ }
+
+ if (power > samples[1].power) {
+ idx0 = 0;
+ idx1 = 1;
+ } else if (power > samples[2].power) {
+ idx0 = 1;
+ idx1 = 2;
+ } else if (power > samples[3].power) {
+ idx0 = 2;
+ idx1 = 3;
+ } else {
+ idx0 = 3;
+ idx1 = 4;
+ }
+
+ denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
+ if (denominator == 0)
+ return -EINVAL;
+ gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
+ gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
+ res = gains0 + (gains1 - gains0) *
+ ((s32) power - (s32) samples[idx0].power) / denominator +
+ (1 << 18);
+ *new_idx = res >> 19;
+ return 0;
+}
+
+static void il3945_hw_reg_init_channel_groups(struct il_priv *il)
+{
+ u32 i;
+ s32 rate_idx;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ const struct il3945_eeprom_txpower_group *group;
+
+ D_POWER("Initializing factory calib info from EEPROM\n");
+
+ for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
+ s8 *clip_pwrs; /* table of power levels for each rate */
+ s8 satur_pwr; /* saturation power for each chnl group */
+ group = &eeprom->groups[i];
+
+ /* sanity check on factory saturation power value */
+ if (group->saturation_power < 40) {
+ IL_WARN("Error: saturation power is %d, "
+ "less than minimum expected 40\n",
+ group->saturation_power);
+ return;
+ }
+
+ /*
+ * Derive requested power levels for each rate, based on
+ * hardware capabilities (saturation power for band).
+ * Basic value is 3dB down from saturation, with further
+ * power reductions for highest 3 data rates. These
+ * backoffs provide headroom for high rate modulation
+ * power peaks, without too much distortion (clipping).
+ */
+ /* we'll fill in this array with h/w max power levels */
+ clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
+
+ /* divide factory saturation power by 2 to find -3dB level */
+ satur_pwr = (s8) (group->saturation_power >> 1);
+
+ /* fill in channel group's nominal powers for each rate */
+ for (rate_idx = 0;
+ rate_idx < RATE_COUNT_3945; rate_idx++, clip_pwrs++) {
+ switch (rate_idx) {
+ case RATE_36M_IDX_TBL:
+ if (i == 0) /* B/G */
+ *clip_pwrs = satur_pwr;
+ else /* A */
+ *clip_pwrs = satur_pwr - 5;
+ break;
+ case RATE_48M_IDX_TBL:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 7;
+ else
+ *clip_pwrs = satur_pwr - 10;
+ break;
+ case RATE_54M_IDX_TBL:
+ if (i == 0)
+ *clip_pwrs = satur_pwr - 9;
+ else
+ *clip_pwrs = satur_pwr - 12;
+ break;
+ default:
+ *clip_pwrs = satur_pwr;
+ break;
+ }
+ }
+ }
+}
+
+/**
+ * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
+ *
+ * Second pass (during init) to set up il->channel_info
+ *
+ * Set up Tx-power settings in our channel info database for each VALID
+ * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
+ * and current temperature.
+ *
+ * Since this is based on current temperature (at init time), these values may
+ * not be valid for very long, but it gives us a starting/default point,
+ * and allows us to active (i.e. using Tx) scan.
+ *
+ * This does *not* write values to NIC, just sets up our internal table.
+ */
+int il3945_txpower_set_from_eeprom(struct il_priv *il)
+{
+ struct il_channel_info *ch_info = NULL;
+ struct il3945_channel_power_info *pwr_info;
+ struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
+ int delta_idx;
+ u8 rate_idx;
+ u8 scan_tbl_idx;
+ const s8 *clip_pwrs; /* array of power levels for each rate */
+ u8 gain, dsp_atten;
+ s8 power;
+ u8 pwr_idx, base_pwr_idx, a_band;
+ u8 i;
+ int temperature;
+
+ /* save temperature reference,
+ * so we can determine next time to calibrate */
+ temperature = il3945_hw_reg_txpower_get_temperature(il);
+ il->last_temperature = temperature;
+
+ il3945_hw_reg_init_channel_groups(il);
+
+ /* initialize Tx power info for each and every channel, 2.4 and 5.x */
+ for (i = 0, ch_info = il->channel_info; i < il->channel_count;
+ i++, ch_info++) {
+ a_band = il_is_channel_a_band(ch_info);
+ if (!il_is_channel_valid(ch_info))
+ continue;
+
+ /* find this channel's channel group (*not* "band") idx */
+ ch_info->group_idx =
+ il3945_hw_reg_get_ch_grp_idx(il, ch_info);
+
+ /* Get this chnlgrp's rate->max/clip-powers table */
+ clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
+
+ /* calculate power idx *adjustment* value according to
+ * diff between current temperature and factory temperature */
+ delta_idx = il3945_hw_reg_adjust_power_by_temp(temperature,
+ eeprom->groups[ch_info->group_idx].
+ temperature);
+
+ D_POWER("Delta idx for channel %d: %d [%d]\n",
+ ch_info->channel, delta_idx, temperature +
+ IL_TEMP_CONVERT);
+
+ /* set tx power value for all OFDM rates */
+ for (rate_idx = 0; rate_idx < IL_OFDM_RATES;
+ rate_idx++) {
+ s32 uninitialized_var(power_idx);
+ int rc;
+
+ /* use channel group's clip-power table,
+ * but don't exceed channel's max power */
+ s8 pwr = min(ch_info->max_power_avg,
+ clip_pwrs[rate_idx]);
+
+ pwr_info = &ch_info->power_info[rate_idx];
+
+ /* get base (i.e. at factory-measured temperature)
+ * power table idx for this rate's power */
+ rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
+ ch_info->group_idx,
+ &power_idx);
+ if (rc) {
+ IL_ERR("Invalid power idx\n");
+ return rc;
+ }
+ pwr_info->base_power_idx = (u8) power_idx;
+
+ /* temperature compensate */
+ power_idx += delta_idx;
+
+ /* stay within range of gain table */
+ power_idx = il3945_hw_reg_fix_power_idx(power_idx);
+
+ /* fill 1 OFDM rate's il3945_channel_power_info struct */
+ pwr_info->requested_power = pwr;
+ pwr_info->power_table_idx = (u8) power_idx;
+ pwr_info->tpc.tx_gain =
+ power_gain_table[a_band][power_idx].tx_gain;
+ pwr_info->tpc.dsp_atten =
+ power_gain_table[a_band][power_idx].dsp_atten;
+ }
+
+ /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
+ pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
+ power = pwr_info->requested_power +
+ IL_CCK_FROM_OFDM_POWER_DIFF;
+ pwr_idx = pwr_info->power_table_idx +
+ IL_CCK_FROM_OFDM_IDX_DIFF;
+ base_pwr_idx = pwr_info->base_power_idx +
+ IL_CCK_FROM_OFDM_IDX_DIFF;
+
+ /* stay within table range */
+ pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
+ gain = power_gain_table[a_band][pwr_idx].tx_gain;
+ dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
+
+ /* fill each CCK rate's il3945_channel_power_info structure
+ * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
+ * NOTE: CCK rates start at end of OFDM rates! */
+ for (rate_idx = 0;
+ rate_idx < IL_CCK_RATES; rate_idx++) {
+ pwr_info = &ch_info->power_info[rate_idx+IL_OFDM_RATES];
+ pwr_info->requested_power = power;
+ pwr_info->power_table_idx = pwr_idx;
+ pwr_info->base_power_idx = base_pwr_idx;
+ pwr_info->tpc.tx_gain = gain;
+ pwr_info->tpc.dsp_atten = dsp_atten;
+ }
+
+ /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
+ for (scan_tbl_idx = 0;
+ scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
+ s32 actual_idx = (scan_tbl_idx == 0) ?
+ RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
+ il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
+ actual_idx, clip_pwrs, ch_info, a_band);
+ }
+ }
+
+ return 0;
+}
+
+int il3945_hw_rxq_stop(struct il_priv *il)
+{
+ int rc;
+
+ il_wr(il, FH39_RCSR_CONFIG(0), 0);
+ rc = il_poll_bit(il, FH39_RSSR_STATUS,
+ FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
+ if (rc < 0)
+ IL_ERR("Can't stop Rx DMA.\n");
+
+ return 0;
+}
+
+int il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
+{
+ int txq_id = txq->q.id;
+
+ struct il3945_shared *shared_data = il->_3945.shared_virt;
+
+ shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
+
+ il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
+ il_wr(il, FH39_CBCC_BASE(txq_id), 0);
+
+ il_wr(il, FH39_TCSR_CONFIG(txq_id),
+ FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
+ FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
+ FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
+ FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
+ FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
+
+ /* fake read to flush all prev. writes */
+ _il_rd(il, FH39_TSSR_CBB_BASE);
+
+ return 0;
+}
+
+/*
+ * HCMD utils
+ */
+static u16 il3945_get_hcmd_size(u8 cmd_id, u16 len)
+{
+ switch (cmd_id) {
+ case REPLY_RXON:
+ return sizeof(struct il3945_rxon_cmd);
+ case POWER_TBL_CMD:
+ return sizeof(struct il3945_powertable_cmd);
+ default:
+ return len;
+ }
+}
+
+
+static u16 il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd,
+ u8 *data)
+{
+ struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
+ addsta->mode = cmd->mode;
+ memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
+ memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
+ addsta->station_flags = cmd->station_flags;
+ addsta->station_flags_msk = cmd->station_flags_msk;
+ addsta->tid_disable_tx = cpu_to_le16(0);
+ addsta->rate_n_flags = cmd->rate_n_flags;
+ addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
+ addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
+ addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+
+ return (u16)sizeof(struct il3945_addsta_cmd);
+}
+
+static int il3945_add_bssid_station(struct il_priv *il,
+ const u8 *addr, u8 *sta_id_r)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ int ret;
+ u8 sta_id;
+ unsigned long flags;
+
+ if (sta_id_r)
+ *sta_id_r = IL_INVALID_STATION;
+
+ ret = il_add_station_common(il, ctx, addr, 0, NULL, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM\n", addr);
+ return ret;
+ }
+
+ if (sta_id_r)
+ *sta_id_r = sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ il->stations[sta_id].used |= IL_STA_LOCAL;
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+
+ return 0;
+}
+static int il3945_manage_ibss_station(struct il_priv *il,
+ struct ieee80211_vif *vif, bool add)
+{
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+ int ret;
+
+ if (add) {
+ ret = il3945_add_bssid_station(il, vif->bss_conf.bssid,
+ &vif_priv->ibss_bssid_sta_id);
+ if (ret)
+ return ret;
+
+ il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
+ (il->band == IEEE80211_BAND_5GHZ) ?
+ RATE_6M_PLCP : RATE_1M_PLCP);
+ il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
+
+ return 0;
+ }
+
+ return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
+ vif->bss_conf.bssid);
+}
+
+/**
+ * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
+ */
+int il3945_init_hw_rate_table(struct il_priv *il)
+{
+ int rc, i, idx, prev_idx;
+ struct il3945_rate_scaling_cmd rate_cmd = {
+ .reserved = {0, 0, 0},
+ };
+ struct il3945_rate_scaling_info *table = rate_cmd.table;
+
+ for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
+ idx = il3945_rates[i].table_rs_idx;
+
+ table[idx].rate_n_flags =
+ il3945_hw_set_rate_n_flags(il3945_rates[i].plcp, 0);
+ table[idx].try_cnt = il->retry_rate;
+ prev_idx = il3945_get_prev_ieee_rate(i);
+ table[idx].next_rate_idx =
+ il3945_rates[prev_idx].table_rs_idx;
+ }
+
+ switch (il->band) {
+ case IEEE80211_BAND_5GHZ:
+ D_RATE("Select A mode rate scale\n");
+ /* If one of the following CCK rates is used,
+ * have it fall back to the 6M OFDM rate */
+ for (i = RATE_1M_IDX_TBL;
+ i <= RATE_11M_IDX_TBL; i++)
+ table[i].next_rate_idx =
+ il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
+
+ /* Don't fall back to CCK rates */
+ table[RATE_12M_IDX_TBL].next_rate_idx =
+ RATE_9M_IDX_TBL;
+
+ /* Don't drop out of OFDM rates */
+ table[RATE_6M_IDX_TBL].next_rate_idx =
+ il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
+ break;
+
+ case IEEE80211_BAND_2GHZ:
+ D_RATE("Select B/G mode rate scale\n");
+ /* If an OFDM rate is used, have it fall back to the
+ * 1M CCK rates */
+
+ if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
+ il_is_associated(il)) {
+
+ idx = IL_FIRST_CCK_RATE;
+ for (i = RATE_6M_IDX_TBL;
+ i <= RATE_54M_IDX_TBL; i++)
+ table[i].next_rate_idx =
+ il3945_rates[idx].table_rs_idx;
+
+ idx = RATE_11M_IDX_TBL;
+ /* CCK shouldn't fall back to OFDM... */
+ table[idx].next_rate_idx = RATE_5M_IDX_TBL;
+ }
+ break;
+
+ default:
+ WARN_ON(1);
+ break;
+ }
+
+ /* Update the rate scaling for control frame Tx */
+ rate_cmd.table_id = 0;
+ rc = il_send_cmd_pdu(il, REPLY_RATE_SCALE, sizeof(rate_cmd),
+ &rate_cmd);
+ if (rc)
+ return rc;
+
+ /* Update the rate scaling for data frame Tx */
+ rate_cmd.table_id = 1;
+ return il_send_cmd_pdu(il, REPLY_RATE_SCALE, sizeof(rate_cmd),
+ &rate_cmd);
+}
+
+/* Called when initializing driver */
+int il3945_hw_set_hw_params(struct il_priv *il)
+{
+ memset((void *)&il->hw_params, 0,
+ sizeof(struct il_hw_params));
+
+ il->_3945.shared_virt =
+ dma_alloc_coherent(&il->pci_dev->dev,
+ sizeof(struct il3945_shared),
+ &il->_3945.shared_phys, GFP_KERNEL);
+ if (!il->_3945.shared_virt) {
+ IL_ERR("failed to allocate pci memory\n");
+ return -ENOMEM;
+ }
+
+ /* Assign number of Usable TX queues */
+ il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
+
+ il->hw_params.tfd_size = sizeof(struct il3945_tfd);
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
+ il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
+ il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ il->hw_params.max_stations = IL3945_STATION_COUNT;
+ il->ctx.bcast_sta_id = IL3945_BROADCAST_ID;
+
+ il->sta_key_max_num = STA_KEY_MAX_NUM;
+
+ il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
+ il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
+ il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
+
+ return 0;
+}
+
+unsigned int il3945_hw_get_beacon_cmd(struct il_priv *il,
+ struct il3945_frame *frame, u8 rate)
+{
+ struct il3945_tx_beacon_cmd *tx_beacon_cmd;
+ unsigned int frame_size;
+
+ tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
+ memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+ tx_beacon_cmd->tx.sta_id =
+ il->ctx.bcast_sta_id;
+ tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+
+ frame_size = il3945_fill_beacon_frame(il,
+ tx_beacon_cmd->frame,
+ sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+
+ BUG_ON(frame_size > MAX_MPDU_SIZE);
+ tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+
+ tx_beacon_cmd->tx.rate = rate;
+ tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
+ TX_CMD_FLG_TSF_MSK);
+
+ /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE*/
+ tx_beacon_cmd->tx.supp_rates[0] =
+ (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
+
+ tx_beacon_cmd->tx.supp_rates[1] =
+ (IL_CCK_BASIC_RATES_MASK & 0xF);
+
+ return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
+}
+
+void il3945_hw_rx_handler_setup(struct il_priv *il)
+{
+ il->rx_handlers[REPLY_TX] = il3945_rx_reply_tx;
+ il->rx_handlers[REPLY_3945_RX] = il3945_rx_reply_rx;
+}
+
+void il3945_hw_setup_deferred_work(struct il_priv *il)
+{
+ INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
+ il3945_bg_reg_txpower_periodic);
+}
+
+void il3945_hw_cancel_deferred_work(struct il_priv *il)
+{
+ cancel_delayed_work(&il->_3945.thermal_periodic);
+}
+
+/* check contents of special bootstrap uCode SRAM */
+static int il3945_verify_bsm(struct il_priv *il)
+ {
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ u32 reg;
+ u32 val;
+
+ D_INFO("Begin verify bsm\n");
+
+ /* verify BSM SRAM contents */
+ val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
+ for (reg = BSM_SRAM_LOWER_BOUND;
+ reg < BSM_SRAM_LOWER_BOUND + len;
+ reg += sizeof(u32), image++) {
+ val = il_rd_prph(il, reg);
+ if (val != le32_to_cpu(*image)) {
+ IL_ERR("BSM uCode verification failed at "
+ "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
+ BSM_SRAM_LOWER_BOUND,
+ reg - BSM_SRAM_LOWER_BOUND, len,
+ val, le32_to_cpu(*image));
+ return -EIO;
+ }
+ }
+
+ D_INFO("BSM bootstrap uCode image OK\n");
+
+ return 0;
+}
+
+
+/******************************************************************************
+ *
+ * EEPROM related functions
+ *
+ ******************************************************************************/
+
+/*
+ * Clear the OWNER_MSK, to establish driver (instead of uCode running on
+ * embedded controller) as EEPROM reader; each read is a series of pulses
+ * to/from the EEPROM chip, not a single event, so even reads could conflict
+ * if they weren't arbitrated by some ownership mechanism. Here, the driver
+ * simply claims ownership, which should be safe when this function is called
+ * (i.e. before loading uCode!).
+ */
+static int il3945_eeprom_acquire_semaphore(struct il_priv *il)
+{
+ _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
+ return 0;
+}
+
+
+static void il3945_eeprom_release_semaphore(struct il_priv *il)
+{
+ return;
+}
+
+ /**
+ * il3945_load_bsm - Load bootstrap instructions
+ *
+ * BSM operation:
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down during RFKILL. When powering back
+ * up after power-saving sleeps (or during initial uCode load), the BSM loads
+ * the bootstrap program into the on-board processor, and starts it.
+ *
+ * The bootstrap program loads (via DMA) instructions and data for a new
+ * program from host DRAM locations indicated by the host driver in the
+ * BSM_DRAM_* registers. Once the new program is loaded, it starts
+ * automatically.
+ *
+ * When initializing the NIC, the host driver points the BSM to the
+ * "initialize" uCode image. This uCode sets up some internal data, then
+ * notifies host via "initialize alive" that it is complete.
+ *
+ * The host then replaces the BSM_DRAM_* pointer values to point to the
+ * normal runtime uCode instructions and a backup uCode data cache buffer
+ * (filled initially with starting data values for the on-board processor),
+ * then triggers the "initialize" uCode to load and launch the runtime uCode,
+ * which begins normal operation.
+ *
+ * When doing a power-save shutdown, runtime uCode saves data SRAM into
+ * the backup data cache in DRAM before SRAM is powered down.
+ *
+ * When powering back up, the BSM loads the bootstrap program. This reloads
+ * the runtime uCode instructions and the backup data cache into SRAM,
+ * and re-launches the runtime uCode from where it left off.
+ */
+static int il3945_load_bsm(struct il_priv *il)
+{
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+ u32 inst_len;
+ u32 data_len;
+ int rc;
+ int i;
+ u32 done;
+ u32 reg_offset;
+
+ D_INFO("Begin load bsm\n");
+
+ /* make sure bootstrap program is no larger than BSM's SRAM size */
+ if (len > IL39_MAX_BSM_SIZE)
+ return -EINVAL;
+
+ /* Tell bootstrap uCode where to find the "Initialize" uCode
+ * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
+ * NOTE: il3945_initialize_alive_start() will replace these values,
+ * after the "initialize" uCode has run, to point to
+ * runtime/protocol instructions and backup data cache. */
+ pinst = il->ucode_init.p_addr;
+ pdata = il->ucode_init_data.p_addr;
+ inst_len = il->ucode_init.len;
+ data_len = il->ucode_init_data.len;
+
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
+
+ /* Fill BSM memory with bootstrap instructions */
+ for (reg_offset = BSM_SRAM_LOWER_BOUND;
+ reg_offset < BSM_SRAM_LOWER_BOUND + len;
+ reg_offset += sizeof(u32), image++)
+ _il_wr_prph(il, reg_offset,
+ le32_to_cpu(*image));
+
+ rc = il3945_verify_bsm(il);
+ if (rc)
+ return rc;
+
+ /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
+ il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
+ il_wr_prph(il, BSM_WR_MEM_DST_REG,
+ IL39_RTC_INST_LOWER_BOUND);
+ il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
+
+ /* Load bootstrap code into instruction SRAM now,
+ * to prepare to load "initialize" uCode */
+ il_wr_prph(il, BSM_WR_CTRL_REG,
+ BSM_WR_CTRL_REG_BIT_START);
+
+ /* Wait for load of bootstrap uCode to finish */
+ for (i = 0; i < 100; i++) {
+ done = il_rd_prph(il, BSM_WR_CTRL_REG);
+ if (!(done & BSM_WR_CTRL_REG_BIT_START))
+ break;
+ udelay(10);
+ }
+ if (i < 100)
+ D_INFO("BSM write complete, poll %d iterations\n", i);
+ else {
+ IL_ERR("BSM write did not complete!\n");
+ return -EIO;
+ }
+
+ /* Enable future boot loads whenever power management unit triggers it
+ * (e.g. when powering back up after power-save shutdown) */
+ il_wr_prph(il, BSM_WR_CTRL_REG,
+ BSM_WR_CTRL_REG_BIT_START_EN);
+
+ return 0;
+}
+
+static struct il_hcmd_ops il3945_hcmd = {
+ .rxon_assoc = il3945_send_rxon_assoc,
+ .commit_rxon = il3945_commit_rxon,
+};
+
+static struct il_lib_ops il3945_lib = {
+ .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = il3945_hw_txq_free_tfd,
+ .txq_init = il3945_hw_tx_queue_init,
+ .load_ucode = il3945_load_bsm,
+ .dump_nic_error_log = il3945_dump_nic_error_log,
+ .apm_ops = {
+ .init = il3945_apm_init,
+ .config = il3945_nic_config,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REGULATORY_BAND_1_CHANNELS,
+ EEPROM_REGULATORY_BAND_2_CHANNELS,
+ EEPROM_REGULATORY_BAND_3_CHANNELS,
+ EEPROM_REGULATORY_BAND_4_CHANNELS,
+ EEPROM_REGULATORY_BAND_5_CHANNELS,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ EEPROM_REGULATORY_BAND_NO_HT40,
+ },
+ .acquire_semaphore = il3945_eeprom_acquire_semaphore,
+ .release_semaphore = il3945_eeprom_release_semaphore,
+ },
+ .send_tx_power = il3945_send_tx_power,
+ .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
+
+ .debugfs_ops = {
+ .rx_stats_read = il3945_ucode_rx_stats_read,
+ .tx_stats_read = il3945_ucode_tx_stats_read,
+ .general_stats_read = il3945_ucode_general_stats_read,
+ },
+};
+
+static const struct il_legacy_ops il3945_legacy_ops = {
+ .post_associate = il3945_post_associate,
+ .config_ap = il3945_config_ap,
+ .manage_ibss_station = il3945_manage_ibss_station,
+};
+
+static struct il_hcmd_utils_ops il3945_hcmd_utils = {
+ .get_hcmd_size = il3945_get_hcmd_size,
+ .build_addsta_hcmd = il3945_build_addsta_hcmd,
+ .request_scan = il3945_request_scan,
+ .post_scan = il3945_post_scan,
+};
+
+static const struct il_ops il3945_ops = {
+ .lib = &il3945_lib,
+ .hcmd = &il3945_hcmd,
+ .utils = &il3945_hcmd_utils,
+ .led = &il3945_led_ops,
+ .legacy = &il3945_legacy_ops,
+ .ieee80211_ops = &il3945_hw_ops,
+};
+
+static struct il_base_params il3945_base_params = {
+ .eeprom_size = IL3945_EEPROM_IMG_SIZE,
+ .num_of_queues = IL39_NUM_QUEUES,
+ .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
+ .set_l0s = false,
+ .use_bsm = true,
+ .led_compensation = 64,
+ .wd_timeout = IL_DEF_WD_TIMEOUT,
+};
+
+static struct il_cfg il3945_bg_cfg = {
+ .name = "3945BG",
+ .fw_name_pre = IL3945_FW_PRE,
+ .ucode_api_max = IL3945_UCODE_API_MAX,
+ .ucode_api_min = IL3945_UCODE_API_MIN,
+ .sku = IL_SKU_G,
+ .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
+ .ops = &il3945_ops,
+ .mod_params = &il3945_mod_params,
+ .base_params = &il3945_base_params,
+ .led_mode = IL_LED_BLINK,
+};
+
+static struct il_cfg il3945_abg_cfg = {
+ .name = "3945ABG",
+ .fw_name_pre = IL3945_FW_PRE,
+ .ucode_api_max = IL3945_UCODE_API_MAX,
+ .ucode_api_min = IL3945_UCODE_API_MIN,
+ .sku = IL_SKU_A|IL_SKU_G,
+ .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
+ .ops = &il3945_ops,
+ .mod_params = &il3945_mod_params,
+ .base_params = &il3945_base_params,
+ .led_mode = IL_LED_BLINK,
+};
+
+DEFINE_PCI_DEVICE_TABLE(il3945_hw_card_ids) = {
+ {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
+ {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
+ {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
+ {0}
+};
+
+MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/pci-aspm.h>
+#include <linux/slab.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/firmware.h>
+#include <linux/etherdevice.h>
+#include <linux/if_arp.h>
+
+#include <net/mac80211.h>
+
+#include <asm/div64.h>
+
+#define DRV_NAME "iwl4965"
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-sta.h"
+#include "iwl-4965-calib.h"
+#include "iwl-4965.h"
+#include "iwl-4965-led.h"
+
+
+/******************************************************************************
+ *
+ * module boiler plate
+ *
+ ******************************************************************************/
+
+/*
+ * module name, copyright, version, etc.
+ */
+#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux"
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+#define VD "d"
+#else
+#define VD
+#endif
+
+#define DRV_VERSION IWLWIFI_VERSION VD
+
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_VERSION(DRV_VERSION);
+MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("iwl4965");
+
+void il4965_update_chain_flags(struct il_priv *il)
+{
+ if (il->cfg->ops->hcmd->set_rxon_chain) {
+ il->cfg->ops->hcmd->set_rxon_chain(il, &il->ctx);
+ if (il->ctx.active.rx_chain != il->ctx.staging.rx_chain)
+ il_commit_rxon(il, &il->ctx);
+ }
+}
+
+static void il4965_clear_free_frames(struct il_priv *il)
+{
+ struct list_head *element;
+
+ D_INFO("%d frames on pre-allocated heap on clear.\n",
+ il->frames_count);
+
+ while (!list_empty(&il->free_frames)) {
+ element = il->free_frames.next;
+ list_del(element);
+ kfree(list_entry(element, struct il_frame, list));
+ il->frames_count--;
+ }
+
+ if (il->frames_count) {
+ IL_WARN("%d frames still in use. Did we lose one?\n",
+ il->frames_count);
+ il->frames_count = 0;
+ }
+}
+
+static struct il_frame *il4965_get_free_frame(struct il_priv *il)
+{
+ struct il_frame *frame;
+ struct list_head *element;
+ if (list_empty(&il->free_frames)) {
+ frame = kzalloc(sizeof(*frame), GFP_KERNEL);
+ if (!frame) {
+ IL_ERR("Could not allocate frame!\n");
+ return NULL;
+ }
+
+ il->frames_count++;
+ return frame;
+ }
+
+ element = il->free_frames.next;
+ list_del(element);
+ return list_entry(element, struct il_frame, list);
+}
+
+static void il4965_free_frame(struct il_priv *il, struct il_frame *frame)
+{
+ memset(frame, 0, sizeof(*frame));
+ list_add(&frame->list, &il->free_frames);
+}
+
+static u32 il4965_fill_beacon_frame(struct il_priv *il,
+ struct ieee80211_hdr *hdr,
+ int left)
+{
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->beacon_skb)
+ return 0;
+
+ if (il->beacon_skb->len > left)
+ return 0;
+
+ memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
+
+ return il->beacon_skb->len;
+}
+
+/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
+static void il4965_set_beacon_tim(struct il_priv *il,
+ struct il_tx_beacon_cmd *tx_beacon_cmd,
+ u8 *beacon, u32 frame_size)
+{
+ u16 tim_idx;
+ struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
+
+ /*
+ * The idx is relative to frame start but we start looking at the
+ * variable-length part of the beacon.
+ */
+ tim_idx = mgmt->u.beacon.variable - beacon;
+
+ /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
+ while ((tim_idx < (frame_size - 2)) &&
+ (beacon[tim_idx] != WLAN_EID_TIM))
+ tim_idx += beacon[tim_idx+1] + 2;
+
+ /* If TIM field was found, set variables */
+ if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
+ tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
+ tx_beacon_cmd->tim_size = beacon[tim_idx+1];
+ } else
+ IL_WARN("Unable to find TIM Element in beacon\n");
+}
+
+static unsigned int il4965_hw_get_beacon_cmd(struct il_priv *il,
+ struct il_frame *frame)
+{
+ struct il_tx_beacon_cmd *tx_beacon_cmd;
+ u32 frame_size;
+ u32 rate_flags;
+ u32 rate;
+ /*
+ * We have to set up the TX command, the TX Beacon command, and the
+ * beacon contents.
+ */
+
+ lockdep_assert_held(&il->mutex);
+
+ if (!il->beacon_ctx) {
+ IL_ERR("trying to build beacon w/o beacon context!\n");
+ return 0;
+ }
+
+ /* Initialize memory */
+ tx_beacon_cmd = &frame->u.beacon;
+ memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
+
+ /* Set up TX beacon contents */
+ frame_size = il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
+ sizeof(frame->u) - sizeof(*tx_beacon_cmd));
+ if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
+ return 0;
+ if (!frame_size)
+ return 0;
+
+ /* Set up TX command fields */
+ tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
+ tx_beacon_cmd->tx.sta_id = il->beacon_ctx->bcast_sta_id;
+ tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
+ tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
+ TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
+
+ /* Set up TX beacon command fields */
+ il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
+ frame_size);
+
+ /* Set up packet rate and flags */
+ rate = il_get_lowest_plcp(il, il->beacon_ctx);
+ il->mgmt_tx_ant = il4965_toggle_tx_ant(il, il->mgmt_tx_ant,
+ il->hw_params.valid_tx_ant);
+ rate_flags = il4965_ant_idx_to_flags(il->mgmt_tx_ant);
+ if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
+ rate_flags |= RATE_MCS_CCK_MSK;
+ tx_beacon_cmd->tx.rate_n_flags = il4965_hw_set_rate_n_flags(rate,
+ rate_flags);
+
+ return sizeof(*tx_beacon_cmd) + frame_size;
+}
+
+int il4965_send_beacon_cmd(struct il_priv *il)
+{
+ struct il_frame *frame;
+ unsigned int frame_size;
+ int rc;
+
+ frame = il4965_get_free_frame(il);
+ if (!frame) {
+ IL_ERR("Could not obtain free frame buffer for beacon "
+ "command.\n");
+ return -ENOMEM;
+ }
+
+ frame_size = il4965_hw_get_beacon_cmd(il, frame);
+ if (!frame_size) {
+ IL_ERR("Error configuring the beacon command\n");
+ il4965_free_frame(il, frame);
+ return -EINVAL;
+ }
+
+ rc = il_send_cmd_pdu(il, REPLY_TX_BEACON, frame_size,
+ &frame->u.cmd[0]);
+
+ il4965_free_frame(il, frame);
+
+ return rc;
+}
+
+static inline dma_addr_t il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+
+ dma_addr_t addr = get_unaligned_le32(&tb->lo);
+ if (sizeof(dma_addr_t) > sizeof(u32))
+ addr |=
+ ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
+
+ return addr;
+}
+
+static inline u16 il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+
+ return le16_to_cpu(tb->hi_n_len) >> 4;
+}
+
+static inline void il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx,
+ dma_addr_t addr, u16 len)
+{
+ struct il_tfd_tb *tb = &tfd->tbs[idx];
+ u16 hi_n_len = len << 4;
+
+ put_unaligned_le32(addr, &tb->lo);
+ if (sizeof(dma_addr_t) > sizeof(u32))
+ hi_n_len |= ((addr >> 16) >> 16) & 0xF;
+
+ tb->hi_n_len = cpu_to_le16(hi_n_len);
+
+ tfd->num_tbs = idx + 1;
+}
+
+static inline u8 il4965_tfd_get_num_tbs(struct il_tfd *tfd)
+{
+ return tfd->num_tbs & 0x1f;
+}
+
+/**
+ * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
+ * @il - driver ilate data
+ * @txq - tx queue
+ *
+ * Does NOT advance any TFD circular buffer read/write idxes
+ * Does NOT free the TFD itself (which is within circular buffer)
+ */
+void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
+{
+ struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
+ struct il_tfd *tfd;
+ struct pci_dev *dev = il->pci_dev;
+ int idx = txq->q.read_ptr;
+ int i;
+ int num_tbs;
+
+ tfd = &tfd_tmp[idx];
+
+ /* Sanity check on number of chunks */
+ num_tbs = il4965_tfd_get_num_tbs(tfd);
+
+ if (num_tbs >= IL_NUM_OF_TBS) {
+ IL_ERR("Too many chunks: %i\n", num_tbs);
+ /* @todo issue fatal error, it is quite serious situation */
+ return;
+ }
+
+ /* Unmap tx_cmd */
+ if (num_tbs)
+ pci_unmap_single(dev,
+ dma_unmap_addr(&txq->meta[idx], mapping),
+ dma_unmap_len(&txq->meta[idx], len),
+ PCI_DMA_BIDIRECTIONAL);
+
+ /* Unmap chunks, if any. */
+ for (i = 1; i < num_tbs; i++)
+ pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i),
+ il4965_tfd_tb_get_len(tfd, i),
+ PCI_DMA_TODEVICE);
+
+ /* free SKB */
+ if (txq->txb) {
+ struct sk_buff *skb;
+
+ skb = txq->txb[txq->q.read_ptr].skb;
+
+ /* can be called from irqs-disabled context */
+ if (skb) {
+ dev_kfree_skb_any(skb);
+ txq->txb[txq->q.read_ptr].skb = NULL;
+ }
+ }
+}
+
+int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il,
+ struct il_tx_queue *txq,
+ dma_addr_t addr, u16 len,
+ u8 reset, u8 pad)
+{
+ struct il_queue *q;
+ struct il_tfd *tfd, *tfd_tmp;
+ u32 num_tbs;
+
+ q = &txq->q;
+ tfd_tmp = (struct il_tfd *)txq->tfds;
+ tfd = &tfd_tmp[q->write_ptr];
+
+ if (reset)
+ memset(tfd, 0, sizeof(*tfd));
+
+ num_tbs = il4965_tfd_get_num_tbs(tfd);
+
+ /* Each TFD can point to a maximum 20 Tx buffers */
+ if (num_tbs >= IL_NUM_OF_TBS) {
+ IL_ERR("Error can not send more than %d chunks\n",
+ IL_NUM_OF_TBS);
+ return -EINVAL;
+ }
+
+ BUG_ON(addr & ~DMA_BIT_MASK(36));
+ if (unlikely(addr & ~IL_TX_DMA_MASK))
+ IL_ERR("Unaligned address = %llx\n",
+ (unsigned long long)addr);
+
+ il4965_tfd_set_tb(tfd, num_tbs, addr, len);
+
+ return 0;
+}
+
+/*
+ * Tell nic where to find circular buffer of Tx Frame Descriptors for
+ * given Tx queue, and enable the DMA channel used for that queue.
+ *
+ * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
+ * channels supported in hardware.
+ */
+int il4965_hw_tx_queue_init(struct il_priv *il,
+ struct il_tx_queue *txq)
+{
+ int txq_id = txq->q.id;
+
+ /* Circular buffer (TFD queue in DRAM) physical base address */
+ il_wr(il, FH_MEM_CBBC_QUEUE(txq_id),
+ txq->q.dma_addr >> 8);
+
+ return 0;
+}
+
+/******************************************************************************
+ *
+ * Generic RX handler implementations
+ *
+ ******************************************************************************/
+static void il4965_rx_reply_alive(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il_alive_resp *palive;
+ struct delayed_work *pwork;
+
+ palive = &pkt->u.alive_frame;
+
+ D_INFO("Alive ucode status 0x%08X revision "
+ "0x%01X 0x%01X\n",
+ palive->is_valid, palive->ver_type,
+ palive->ver_subtype);
+
+ if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
+ D_INFO("Initialization Alive received.\n");
+ memcpy(&il->card_alive_init,
+ &pkt->u.alive_frame,
+ sizeof(struct il_init_alive_resp));
+ pwork = &il->init_alive_start;
+ } else {
+ D_INFO("Runtime Alive received.\n");
+ memcpy(&il->card_alive, &pkt->u.alive_frame,
+ sizeof(struct il_alive_resp));
+ pwork = &il->alive_start;
+ }
+
+ /* We delay the ALIVE response by 5ms to
+ * give the HW RF Kill time to activate... */
+ if (palive->is_valid == UCODE_VALID_OK)
+ queue_delayed_work(il->workqueue, pwork,
+ msecs_to_jiffies(5));
+ else
+ IL_WARN("uCode did not respond OK.\n");
+}
+
+/**
+ * il4965_bg_stats_periodic - Timer callback to queue stats
+ *
+ * This callback is provided in order to send a stats request.
+ *
+ * This timer function is continually reset to execute within
+ * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
+ * was received. We need to ensure we receive the stats in order
+ * to update the temperature used for calibrating the TXPOWER.
+ */
+static void il4965_bg_stats_periodic(unsigned long data)
+{
+ struct il_priv *il = (struct il_priv *)data;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ /* dont send host command if rf-kill is on */
+ if (!il_is_ready_rf(il))
+ return;
+
+ il_send_stats_request(il, CMD_ASYNC, false);
+}
+
+static void il4965_rx_beacon_notif(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il4965_beacon_notif *beacon =
+ (struct il4965_beacon_notif *)pkt->u.raw;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+ D_RX("beacon status %x retries %d iss %d "
+ "tsf %d %d rate %d\n",
+ le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+ beacon->beacon_notify_hdr.failure_frame,
+ le32_to_cpu(beacon->ibss_mgr_status),
+ le32_to_cpu(beacon->high_tsf),
+ le32_to_cpu(beacon->low_tsf), rate);
+#endif
+
+ il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+}
+
+static void il4965_perform_ct_kill_task(struct il_priv *il)
+{
+ unsigned long flags;
+
+ D_POWER("Stop all queues\n");
+
+ if (il->mac80211_registered)
+ ieee80211_stop_queues(il->hw);
+
+ _il_wr(il, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ _il_rd(il, CSR_UCODE_DRV_GP1);
+
+ spin_lock_irqsave(&il->reg_lock, flags);
+ if (!_il_grab_nic_access(il))
+ _il_release_nic_access(il);
+ spin_unlock_irqrestore(&il->reg_lock, flags);
+}
+
+/* Handle notification from uCode that card's power state is changing
+ * due to software, hardware, or critical temperature RFKILL */
+static void il4965_rx_card_state_notif(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
+ unsigned long status = il->status;
+
+ D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
+ (flags & HW_CARD_DISABLED) ? "Kill" : "On",
+ (flags & SW_CARD_DISABLED) ? "Kill" : "On",
+ (flags & CT_CARD_DISABLED) ?
+ "Reached" : "Not reached");
+
+ if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
+ CT_CARD_DISABLED)) {
+
+ _il_wr(il, CSR_UCODE_DRV_GP1_SET,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ il_wr(il, HBUS_TARG_MBX_C,
+ HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+
+ if (!(flags & RXON_CARD_DISABLED)) {
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+ il_wr(il, HBUS_TARG_MBX_C,
+ HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
+ }
+ }
+
+ if (flags & CT_CARD_DISABLED)
+ il4965_perform_ct_kill_task(il);
+
+ if (flags & HW_CARD_DISABLED)
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+
+ if (!(flags & RXON_CARD_DISABLED))
+ il_scan_cancel(il);
+
+ if ((test_bit(STATUS_RF_KILL_HW, &status) !=
+ test_bit(STATUS_RF_KILL_HW, &il->status)))
+ wiphy_rfkill_set_hw_state(il->hw->wiphy,
+ test_bit(STATUS_RF_KILL_HW, &il->status));
+ else
+ wake_up(&il->wait_command_queue);
+}
+
+/**
+ * il4965_setup_rx_handlers - Initialize Rx handler callbacks
+ *
+ * Setup the RX handlers for each of the reply types sent from the uCode
+ * to the host.
+ *
+ * This function chains into the hardware specific files for them to setup
+ * any hardware specific handlers as well.
+ */
+static void il4965_setup_rx_handlers(struct il_priv *il)
+{
+ il->rx_handlers[REPLY_ALIVE] = il4965_rx_reply_alive;
+ il->rx_handlers[REPLY_ERROR] = il_rx_reply_error;
+ il->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = il_rx_csa;
+ il->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
+ il_rx_spectrum_measure_notif;
+ il->rx_handlers[PM_SLEEP_NOTIFICATION] = il_rx_pm_sleep_notif;
+ il->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
+ il_rx_pm_debug_stats_notif;
+ il->rx_handlers[BEACON_NOTIFICATION] = il4965_rx_beacon_notif;
+
+ /*
+ * The same handler is used for both the REPLY to a discrete
+ * stats request from the host as well as for the periodic
+ * stats notifications (after received beacons) from the uCode.
+ */
+ il->rx_handlers[REPLY_STATISTICS_CMD] = il4965_reply_stats;
+ il->rx_handlers[STATISTICS_NOTIFICATION] = il4965_rx_stats;
+
+ il_setup_rx_scan_handlers(il);
+
+ /* status change handler */
+ il->rx_handlers[CARD_STATE_NOTIFICATION] =
+ il4965_rx_card_state_notif;
+
+ il->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
+ il4965_rx_missed_beacon_notif;
+ /* Rx handlers */
+ il->rx_handlers[REPLY_RX_PHY_CMD] = il4965_rx_reply_rx_phy;
+ il->rx_handlers[REPLY_RX_MPDU_CMD] = il4965_rx_reply_rx;
+ /* block ack */
+ il->rx_handlers[REPLY_COMPRESSED_BA] = il4965_rx_reply_compressed_ba;
+ /* Set up hardware specific Rx handlers */
+ il->cfg->ops->lib->rx_handler_setup(il);
+}
+
+/**
+ * il4965_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the il->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+void il4965_rx_handle(struct il_priv *il)
+{
+ struct il_rx_buf *rxb;
+ struct il_rx_pkt *pkt;
+ struct il_rx_queue *rxq = &il->rxq;
+ u32 r, i;
+ int reclaim;
+ unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ int total_empty;
+
+ /* uCode's read idx (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
+ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+ i = rxq->read;
+
+ /* Rx interrupt, but nothing sent from uCode */
+ if (i == r)
+ D_RX("r = %d, i = %d\n", r, i);
+
+ /* calculate total frames need to be restock after handling RX */
+ total_empty = r - rxq->write_actual;
+ if (total_empty < 0)
+ total_empty += RX_QUEUE_SIZE;
+
+ if (total_empty > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
+
+ while (i != r) {
+ int len;
+
+ rxb = rxq->queue[i];
+
+ /* If an RXB doesn't have a Rx queue slot associated with it,
+ * then a bug has been introduced in the queue refilling
+ * routines -- catch it here */
+ BUG_ON(rxb == NULL);
+
+ rxq->queue[i] = NULL;
+
+ pci_unmap_page(il->pci_dev, rxb->page_dma,
+ PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ pkt = rxb_addr(rxb);
+
+ len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ len += sizeof(u32); /* account for status word */
+
+ /* Reclaim a command buffer only if this packet is a response
+ * to a (driver-originated) command.
+ * If the packet (e.g. Rx frame) originated from uCode,
+ * there is no command buffer to reclaim.
+ * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+ * but apparently a few don't get set; catch them here. */
+ reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+ (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
+ (pkt->hdr.cmd != REPLY_RX) &&
+ (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
+ (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
+ (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+ (pkt->hdr.cmd != REPLY_TX);
+
+ /* Based on type of command response or notification,
+ * handle those that need handling via function in
+ * rx_handlers table. See il4965_setup_rx_handlers() */
+ if (il->rx_handlers[pkt->hdr.cmd]) {
+ D_RX("r = %d, i = %d, %s, 0x%02x\n", r,
+ i, il_get_cmd_string(pkt->hdr.cmd),
+ pkt->hdr.cmd);
+ il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
+ il->rx_handlers[pkt->hdr.cmd] (il, rxb);
+ } else {
+ /* No handling needed */
+ D_RX(
+ "r %d i %d No handler needed for %s, 0x%02x\n",
+ r, i, il_get_cmd_string(pkt->hdr.cmd),
+ pkt->hdr.cmd);
+ }
+
+ /*
+ * XXX: After here, we should always check rxb->page
+ * against NULL before touching it or its virtual
+ * memory (pkt). Because some rx_handler might have
+ * already taken or freed the pages.
+ */
+
+ if (reclaim) {
+ /* Invoke any callbacks, transfer the buffer to caller,
+ * and fire off the (possibly) blocking il_send_cmd()
+ * as we reclaim the driver command queue */
+ if (rxb->page)
+ il_tx_cmd_complete(il, rxb);
+ else
+ IL_WARN("Claim null rxb?\n");
+ }
+
+ /* Reuse the page if possible. For notification packets and
+ * SKBs that fail to Rx correctly, add them back into the
+ * rx_free list for reuse later. */
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (rxb->page != NULL) {
+ rxb->page_dma = pci_map_page(il->pci_dev, rxb->page,
+ 0, PAGE_SIZE << il->hw_params.rx_page_order,
+ PCI_DMA_FROMDEVICE);
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ } else
+ list_add_tail(&rxb->list, &rxq->rx_used);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode wont assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ rxq->read = i;
+ il4965_rx_replenish_now(il);
+ count = 0;
+ }
+ }
+ }
+
+ /* Backtrack one entry */
+ rxq->read = i;
+ if (fill_rx)
+ il4965_rx_replenish_now(il);
+ else
+ il4965_rx_queue_restock(il);
+}
+
+/* call this function to flush any scheduled tasklet */
+static inline void il4965_synchronize_irq(struct il_priv *il)
+{
+ /* wait to make sure we flush pending tasklet*/
+ synchronize_irq(il->pci_dev->irq);
+ tasklet_kill(&il->irq_tasklet);
+}
+
+static void il4965_irq_tasklet(struct il_priv *il)
+{
+ u32 inta, handled = 0;
+ u32 inta_fh;
+ unsigned long flags;
+ u32 i;
+#ifdef CONFIG_IWLEGACY_DEBUG
+ u32 inta_mask;
+#endif
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ * and will clear only when CSR_FH_INT_STATUS gets cleared. */
+ inta = _il_rd(il, CSR_INT);
+ _il_wr(il, CSR_INT, inta);
+
+ /* Ack/clear/reset pending flow-handler (DMA) interrupts.
+ * Any new interrupts that happen after this, either while we're
+ * in this tasklet, or later, will show up in next ISR/tasklet. */
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & IL_DL_ISR) {
+ /* just for debug */
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
+ inta, inta_mask, inta_fh);
+ }
+#endif
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
+ * atomic, make sure that inta covers all the interrupts that
+ * we've discovered, even if FH interrupt came in just after
+ * reading CSR_INT. */
+ if (inta_fh & CSR49_FH_INT_RX_MASK)
+ inta |= CSR_INT_BIT_FH_RX;
+ if (inta_fh & CSR49_FH_INT_TX_MASK)
+ inta |= CSR_INT_BIT_FH_TX;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IL_ERR("Hardware error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ il_disable_interrupts(il);
+
+ il->isr_stats.hw++;
+ il_irq_handle_error(il);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ return;
+ }
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ D_ISR("Scheduler finished to transmit "
+ "the frame/frames.\n");
+ il->isr_stats.sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ D_ISR("Alive interrupt\n");
+ il->isr_stats.alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* HW RF KILL switch toggled */
+ if (inta & CSR_INT_BIT_RF_KILL) {
+ int hw_rf_kill = 0;
+ if (!(_il_rd(il, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+ hw_rf_kill = 1;
+
+ IL_WARN("RF_KILL bit toggled to %s.\n",
+ hw_rf_kill ? "disable radio" : "enable radio");
+
+ il->isr_stats.rfkill++;
+
+ /* driver only loads ucode once setting the interface up.
+ * the driver allows loading the ucode even if the radio
+ * is killed. Hence update the killswitch state here. The
+ * rfkill handler will care about restarting if needed.
+ */
+ if (!test_bit(STATUS_ALIVE, &il->status)) {
+ if (hw_rf_kill)
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+ wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
+ }
+
+ handled |= CSR_INT_BIT_RF_KILL;
+ }
+
+ /* Chip got too hot and stopped itself */
+ if (inta & CSR_INT_BIT_CT_KILL) {
+ IL_ERR("Microcode CT kill error detected.\n");
+ il->isr_stats.ctkill++;
+ handled |= CSR_INT_BIT_CT_KILL;
+ }
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IL_ERR("Microcode SW error detected. "
+ " Restarting 0x%X.\n", inta);
+ il->isr_stats.sw++;
+ il_irq_handle_error(il);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /*
+ * uCode wakes up after power-down sleep.
+ * Tell device about any new tx or host commands enqueued,
+ * and about any Rx buffers made available while asleep.
+ */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ D_ISR("Wakeup interrupt\n");
+ il_rx_queue_update_write_ptr(il, &il->rxq);
+ for (i = 0; i < il->hw_params.max_txq_num; i++)
+ il_txq_update_write_ptr(il, &il->txq[i]);
+ il->isr_stats.wakeup++;
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ il4965_rx_handle(il);
+ il->isr_stats.rx++;
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ }
+
+ /* This "Tx" DMA channel is used only for loading uCode */
+ if (inta & CSR_INT_BIT_FH_TX) {
+ D_ISR("uCode load interrupt\n");
+ il->isr_stats.tx++;
+ handled |= CSR_INT_BIT_FH_TX;
+ /* Wake up uCode load routine, now that load is complete */
+ il->ucode_write_complete = 1;
+ wake_up(&il->wait_command_queue);
+ }
+
+ if (inta & ~handled) {
+ IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ il->isr_stats.unhandled++;
+ }
+
+ if (inta & ~(il->inta_mask)) {
+ IL_WARN("Disabled INTA bits 0x%08x were pending\n",
+ inta & ~il->inta_mask);
+ IL_WARN(" with FH_INT = 0x%08x\n", inta_fh);
+ }
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &il->status))
+ il_enable_interrupts(il);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ il_enable_rfkill_int(il);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+ if (il_get_debug_level(il) & (IL_DL_ISR)) {
+ inta = _il_rd(il, CSR_INT);
+ inta_mask = _il_rd(il, CSR_INT_MASK);
+ inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
+ D_ISR(
+ "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
+ "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
+ }
+#endif
+}
+
+/*****************************************************************************
+ *
+ * sysfs attributes
+ *
+ *****************************************************************************/
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+
+/*
+ * The following adds a new attribute to the sysfs representation
+ * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
+ * used for controlling the debug level.
+ *
+ * See the level definitions in iwl for details.
+ *
+ * The debug_level being managed using sysfs below is a per device debug
+ * level that is used instead of the global debug level if it (the per
+ * device debug level) is set.
+ */
+static ssize_t il4965_show_debug_level(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
+}
+static ssize_t il4965_store_debug_level(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 0, &val);
+ if (ret)
+ IL_ERR("%s is not in hex or decimal form.\n", buf);
+ else {
+ il->debug_level = val;
+ if (il_alloc_traffic_mem(il))
+ IL_ERR(
+ "Not enough memory to generate traffic log\n");
+ }
+ return strnlen(buf, count);
+}
+
+static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
+ il4965_show_debug_level, il4965_store_debug_level);
+
+
+#endif /* CONFIG_IWLEGACY_DEBUG */
+
+
+static ssize_t il4965_show_temperature(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_alive(il))
+ return -EAGAIN;
+
+ return sprintf(buf, "%d\n", il->temperature);
+}
+
+static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL);
+
+static ssize_t il4965_show_tx_power(struct device *d,
+ struct device_attribute *attr, char *buf)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+
+ if (!il_is_ready_rf(il))
+ return sprintf(buf, "off\n");
+ else
+ return sprintf(buf, "%d\n", il->tx_power_user_lmt);
+}
+
+static ssize_t il4965_store_tx_power(struct device *d,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct il_priv *il = dev_get_drvdata(d);
+ unsigned long val;
+ int ret;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ IL_INFO("%s is not in decimal form.\n", buf);
+ else {
+ ret = il_set_tx_power(il, val, false);
+ if (ret)
+ IL_ERR("failed setting tx power (0x%d).\n",
+ ret);
+ else
+ ret = count;
+ }
+ return ret;
+}
+
+static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO,
+ il4965_show_tx_power, il4965_store_tx_power);
+
+static struct attribute *il_sysfs_entries[] = {
+ &dev_attr_temperature.attr,
+ &dev_attr_tx_power.attr,
+#ifdef CONFIG_IWLEGACY_DEBUG
+ &dev_attr_debug_level.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group il_attribute_group = {
+ .name = NULL, /* put in device directory */
+ .attrs = il_sysfs_entries,
+};
+
+/******************************************************************************
+ *
+ * uCode download functions
+ *
+ ******************************************************************************/
+
+static void il4965_dealloc_ucode_pci(struct il_priv *il)
+{
+ il_free_fw_desc(il->pci_dev, &il->ucode_code);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init);
+ il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
+ il_free_fw_desc(il->pci_dev, &il->ucode_boot);
+}
+
+static void il4965_nic_start(struct il_priv *il)
+{
+ /* Remove all resets to allow NIC to operate */
+ _il_wr(il, CSR_RESET, 0);
+}
+
+static void il4965_ucode_callback(const struct firmware *ucode_raw,
+ void *context);
+static int il4965_mac_setup_register(struct il_priv *il,
+ u32 max_probe_length);
+
+static int __must_check il4965_request_firmware(struct il_priv *il, bool first)
+{
+ const char *name_pre = il->cfg->fw_name_pre;
+ char tag[8];
+
+ if (first) {
+ il->fw_idx = il->cfg->ucode_api_max;
+ sprintf(tag, "%d", il->fw_idx);
+ } else {
+ il->fw_idx--;
+ sprintf(tag, "%d", il->fw_idx);
+ }
+
+ if (il->fw_idx < il->cfg->ucode_api_min) {
+ IL_ERR("no suitable firmware found!\n");
+ return -ENOENT;
+ }
+
+ sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
+
+ D_INFO("attempting to load firmware '%s'\n",
+ il->firmware_name);
+
+ return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
+ &il->pci_dev->dev, GFP_KERNEL, il,
+ il4965_ucode_callback);
+}
+
+struct il4965_firmware_pieces {
+ const void *inst, *data, *init, *init_data, *boot;
+ size_t inst_size, data_size, init_size, init_data_size, boot_size;
+};
+
+static int il4965_load_firmware(struct il_priv *il,
+ const struct firmware *ucode_raw,
+ struct il4965_firmware_pieces *pieces)
+{
+ struct il_ucode_header *ucode = (void *)ucode_raw->data;
+ u32 api_ver, hdr_size;
+ const u8 *src;
+
+ il->ucode_ver = le32_to_cpu(ucode->ver);
+ api_ver = IL_UCODE_API(il->ucode_ver);
+
+ switch (api_ver) {
+ default:
+ case 0:
+ case 1:
+ case 2:
+ hdr_size = 24;
+ if (ucode_raw->size < hdr_size) {
+ IL_ERR("File size too small!\n");
+ return -EINVAL;
+ }
+ pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
+ pieces->data_size = le32_to_cpu(ucode->v1.data_size);
+ pieces->init_size = le32_to_cpu(ucode->v1.init_size);
+ pieces->init_data_size =
+ le32_to_cpu(ucode->v1.init_data_size);
+ pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
+ src = ucode->v1.data;
+ break;
+ }
+
+ /* Verify size of file vs. image size info in file's header */
+ if (ucode_raw->size != hdr_size + pieces->inst_size +
+ pieces->data_size + pieces->init_size +
+ pieces->init_data_size + pieces->boot_size) {
+
+ IL_ERR(
+ "uCode file size %d does not match expected size\n",
+ (int)ucode_raw->size);
+ return -EINVAL;
+ }
+
+ pieces->inst = src;
+ src += pieces->inst_size;
+ pieces->data = src;
+ src += pieces->data_size;
+ pieces->init = src;
+ src += pieces->init_size;
+ pieces->init_data = src;
+ src += pieces->init_data_size;
+ pieces->boot = src;
+ src += pieces->boot_size;
+
+ return 0;
+}
+
+/**
+ * il4965_ucode_callback - callback when firmware was loaded
+ *
+ * If loaded successfully, copies the firmware into buffers
+ * for the card to fetch (via DMA).
+ */
+static void
+il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
+{
+ struct il_priv *il = context;
+ struct il_ucode_header *ucode;
+ int err;
+ struct il4965_firmware_pieces pieces;
+ const unsigned int api_max = il->cfg->ucode_api_max;
+ const unsigned int api_min = il->cfg->ucode_api_min;
+ u32 api_ver;
+
+ u32 max_probe_length = 200;
+ u32 standard_phy_calibration_size =
+ IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;
+
+ memset(&pieces, 0, sizeof(pieces));
+
+ if (!ucode_raw) {
+ if (il->fw_idx <= il->cfg->ucode_api_max)
+ IL_ERR(
+ "request for firmware file '%s' failed.\n",
+ il->firmware_name);
+ goto try_again;
+ }
+
+ D_INFO("Loaded firmware file '%s' (%zd bytes).\n",
+ il->firmware_name, ucode_raw->size);
+
+ /* Make sure that we got at least the API version number */
+ if (ucode_raw->size < 4) {
+ IL_ERR("File size way too small!\n");
+ goto try_again;
+ }
+
+ /* Data from ucode file: header followed by uCode images */
+ ucode = (struct il_ucode_header *)ucode_raw->data;
+
+ err = il4965_load_firmware(il, ucode_raw, &pieces);
+
+ if (err)
+ goto try_again;
+
+ api_ver = IL_UCODE_API(il->ucode_ver);
+
+ /*
+ * api_ver should match the api version forming part of the
+ * firmware filename ... but we don't check for that and only rely
+ * on the API version read from firmware header from here on forward
+ */
+ if (api_ver < api_min || api_ver > api_max) {
+ IL_ERR(
+ "Driver unable to support your firmware API. "
+ "Driver supports v%u, firmware is v%u.\n",
+ api_max, api_ver);
+ goto try_again;
+ }
+
+ if (api_ver != api_max)
+ IL_ERR(
+ "Firmware has old API version. Expected v%u, "
+ "got v%u. New firmware can be obtained "
+ "from http://www.intellinuxwireless.org.\n",
+ api_max, api_ver);
+
+ IL_INFO("loaded firmware version %u.%u.%u.%u\n",
+ IL_UCODE_MAJOR(il->ucode_ver),
+ IL_UCODE_MINOR(il->ucode_ver),
+ IL_UCODE_API(il->ucode_ver),
+ IL_UCODE_SERIAL(il->ucode_ver));
+
+ snprintf(il->hw->wiphy->fw_version,
+ sizeof(il->hw->wiphy->fw_version),
+ "%u.%u.%u.%u",
+ IL_UCODE_MAJOR(il->ucode_ver),
+ IL_UCODE_MINOR(il->ucode_ver),
+ IL_UCODE_API(il->ucode_ver),
+ IL_UCODE_SERIAL(il->ucode_ver));
+
+ /*
+ * For any of the failures below (before allocating pci memory)
+ * we will try to load a version with a smaller API -- maybe the
+ * user just got a corrupted version of the latest API.
+ */
+
+ D_INFO("f/w package hdr ucode version raw = 0x%x\n",
+ il->ucode_ver);
+ D_INFO("f/w package hdr runtime inst size = %Zd\n",
+ pieces.inst_size);
+ D_INFO("f/w package hdr runtime data size = %Zd\n",
+ pieces.data_size);
+ D_INFO("f/w package hdr init inst size = %Zd\n",
+ pieces.init_size);
+ D_INFO("f/w package hdr init data size = %Zd\n",
+ pieces.init_data_size);
+ D_INFO("f/w package hdr boot inst size = %Zd\n",
+ pieces.boot_size);
+
+ /* Verify that uCode images will fit in card's SRAM */
+ if (pieces.inst_size > il->hw_params.max_inst_size) {
+ IL_ERR("uCode instr len %Zd too large to fit in\n",
+ pieces.inst_size);
+ goto try_again;
+ }
+
+ if (pieces.data_size > il->hw_params.max_data_size) {
+ IL_ERR("uCode data len %Zd too large to fit in\n",
+ pieces.data_size);
+ goto try_again;
+ }
+
+ if (pieces.init_size > il->hw_params.max_inst_size) {
+ IL_ERR("uCode init instr len %Zd too large to fit in\n",
+ pieces.init_size);
+ goto try_again;
+ }
+
+ if (pieces.init_data_size > il->hw_params.max_data_size) {
+ IL_ERR("uCode init data len %Zd too large to fit in\n",
+ pieces.init_data_size);
+ goto try_again;
+ }
+
+ if (pieces.boot_size > il->hw_params.max_bsm_size) {
+ IL_ERR("uCode boot instr len %Zd too large to fit in\n",
+ pieces.boot_size);
+ goto try_again;
+ }
+
+ /* Allocate ucode buffers for card's bus-master loading ... */
+
+ /* Runtime instructions and 2 copies of data:
+ * 1) unmodified from disk
+ * 2) backup cache for save/restore during power-downs */
+ il->ucode_code.len = pieces.inst_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
+
+ il->ucode_data.len = pieces.data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
+
+ il->ucode_data_backup.len = pieces.data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
+
+ if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
+ !il->ucode_data_backup.v_addr)
+ goto err_pci_alloc;
+
+ /* Initialization instructions and data */
+ if (pieces.init_size && pieces.init_data_size) {
+ il->ucode_init.len = pieces.init_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
+
+ il->ucode_init_data.len = pieces.init_data_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
+
+ if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Bootstrap (instructions only, no data) */
+ if (pieces.boot_size) {
+ il->ucode_boot.len = pieces.boot_size;
+ il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
+
+ if (!il->ucode_boot.v_addr)
+ goto err_pci_alloc;
+ }
+
+ /* Now that we can no longer fail, copy information */
+
+ il->sta_key_max_num = STA_KEY_MAX_NUM;
+
+ /* Copy images into buffers for card's bus-master reads ... */
+
+ /* Runtime instructions (first block of data in file) */
+ D_INFO("Copying (but not loading) uCode instr len %Zd\n",
+ pieces.inst_size);
+ memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
+
+ D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
+ il->ucode_code.v_addr, (u32)il->ucode_code.p_addr);
+
+ /*
+ * Runtime data
+ * NOTE: Copy into backup buffer will be done in il_up()
+ */
+ D_INFO("Copying (but not loading) uCode data len %Zd\n",
+ pieces.data_size);
+ memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
+ memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
+
+ /* Initialization instructions */
+ if (pieces.init_size) {
+ D_INFO(
+ "Copying (but not loading) init instr len %Zd\n",
+ pieces.init_size);
+ memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
+ }
+
+ /* Initialization data */
+ if (pieces.init_data_size) {
+ D_INFO(
+ "Copying (but not loading) init data len %Zd\n",
+ pieces.init_data_size);
+ memcpy(il->ucode_init_data.v_addr, pieces.init_data,
+ pieces.init_data_size);
+ }
+
+ /* Bootstrap instructions */
+ D_INFO("Copying (but not loading) boot instr len %Zd\n",
+ pieces.boot_size);
+ memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
+
+ /*
+ * figure out the offset of chain noise reset and gain commands
+ * base on the size of standard phy calibration commands table size
+ */
+ il->_4965.phy_calib_chain_noise_reset_cmd =
+ standard_phy_calibration_size;
+ il->_4965.phy_calib_chain_noise_gain_cmd =
+ standard_phy_calibration_size + 1;
+
+ /**************************************************
+ * This is still part of probe() in a sense...
+ *
+ * 9. Setup and register with mac80211 and debugfs
+ **************************************************/
+ err = il4965_mac_setup_register(il, max_probe_length);
+ if (err)
+ goto out_unbind;
+
+ err = il_dbgfs_register(il, DRV_NAME);
+ if (err)
+ IL_ERR(
+ "failed to create debugfs files. Ignoring error: %d\n", err);
+
+ err = sysfs_create_group(&il->pci_dev->dev.kobj,
+ &il_attribute_group);
+ if (err) {
+ IL_ERR("failed to create sysfs device attributes\n");
+ goto out_unbind;
+ }
+
+ /* We have our copies now, allow OS release its copies */
+ release_firmware(ucode_raw);
+ complete(&il->_4965.firmware_loading_complete);
+ return;
+
+ try_again:
+ /* try next, if any */
+ if (il4965_request_firmware(il, false))
+ goto out_unbind;
+ release_firmware(ucode_raw);
+ return;
+
+ err_pci_alloc:
+ IL_ERR("failed to allocate pci memory\n");
+ il4965_dealloc_ucode_pci(il);
+ out_unbind:
+ complete(&il->_4965.firmware_loading_complete);
+ device_release_driver(&il->pci_dev->dev);
+ release_firmware(ucode_raw);
+}
+
+static const char * const desc_lookup_text[] = {
+ "OK",
+ "FAIL",
+ "BAD_PARAM",
+ "BAD_CHECKSUM",
+ "NMI_INTERRUPT_WDG",
+ "SYSASSERT",
+ "FATAL_ERROR",
+ "BAD_COMMAND",
+ "HW_ERROR_TUNE_LOCK",
+ "HW_ERROR_TEMPERATURE",
+ "ILLEGAL_CHAN_FREQ",
+ "VCC_NOT_STBL",
+ "FH_ERROR",
+ "NMI_INTERRUPT_HOST",
+ "NMI_INTERRUPT_ACTION_PT",
+ "NMI_INTERRUPT_UNKNOWN",
+ "UCODE_VERSION_MISMATCH",
+ "HW_ERROR_ABS_LOCK",
+ "HW_ERROR_CAL_LOCK_FAIL",
+ "NMI_INTERRUPT_INST_ACTION_PT",
+ "NMI_INTERRUPT_DATA_ACTION_PT",
+ "NMI_TRM_HW_ER",
+ "NMI_INTERRUPT_TRM",
+ "NMI_INTERRUPT_BREAK_POINT",
+ "DEBUG_0",
+ "DEBUG_1",
+ "DEBUG_2",
+ "DEBUG_3",
+};
+
+static struct { char *name; u8 num; } advanced_lookup[] = {
+ { "NMI_INTERRUPT_WDG", 0x34 },
+ { "SYSASSERT", 0x35 },
+ { "UCODE_VERSION_MISMATCH", 0x37 },
+ { "BAD_COMMAND", 0x38 },
+ { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
+ { "FATAL_ERROR", 0x3D },
+ { "NMI_TRM_HW_ERR", 0x46 },
+ { "NMI_INTERRUPT_TRM", 0x4C },
+ { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
+ { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
+ { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
+ { "NMI_INTERRUPT_HOST", 0x66 },
+ { "NMI_INTERRUPT_ACTION_PT", 0x7C },
+ { "NMI_INTERRUPT_UNKNOWN", 0x84 },
+ { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
+ { "ADVANCED_SYSASSERT", 0 },
+};
+
+static const char *il4965_desc_lookup(u32 num)
+{
+ int i;
+ int max = ARRAY_SIZE(desc_lookup_text);
+
+ if (num < max)
+ return desc_lookup_text[num];
+
+ max = ARRAY_SIZE(advanced_lookup) - 1;
+ for (i = 0; i < max; i++) {
+ if (advanced_lookup[i].num == num)
+ break;
+ }
+ return advanced_lookup[i].name;
+}
+
+#define ERROR_START_OFFSET (1 * sizeof(u32))
+#define ERROR_ELEM_SIZE (7 * sizeof(u32))
+
+void il4965_dump_nic_error_log(struct il_priv *il)
+{
+ u32 data2, line;
+ u32 desc, time, count, base, data1;
+ u32 blink1, blink2, ilink1, ilink2;
+ u32 pc, hcmd;
+
+ if (il->ucode_type == UCODE_INIT) {
+ base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
+ } else {
+ base = le32_to_cpu(il->card_alive.error_event_table_ptr);
+ }
+
+ if (!il->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
+ IL_ERR(
+ "Not valid error log pointer 0x%08X for %s uCode\n",
+ base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
+ return;
+ }
+
+ count = il_read_targ_mem(il, base);
+
+ if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
+ IL_ERR("Start IWL Error Log Dump:\n");
+ IL_ERR("Status: 0x%08lX, count: %d\n",
+ il->status, count);
+ }
+
+ desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
+ il->isr_stats.err_code = desc;
+ pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
+ blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
+ blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
+ ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
+ ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
+ data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
+ data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
+ line = il_read_targ_mem(il, base + 9 * sizeof(u32));
+ time = il_read_targ_mem(il, base + 11 * sizeof(u32));
+ hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));
+
+ IL_ERR("Desc Time "
+ "data1 data2 line\n");
+ IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
+ il4965_desc_lookup(desc), desc, time, data1, data2, line);
+ IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n");
+ IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
+ pc, blink1, blink2, ilink1, ilink2, hcmd);
+}
+
+static void il4965_rf_kill_ct_config(struct il_priv *il)
+{
+ struct il_ct_kill_config cmd;
+ unsigned long flags;
+ int ret = 0;
+
+ spin_lock_irqsave(&il->lock, flags);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ cmd.critical_temperature_R =
+ cpu_to_le32(il->hw_params.ct_kill_threshold);
+
+ ret = il_send_cmd_pdu(il, REPLY_CT_KILL_CONFIG_CMD,
+ sizeof(cmd), &cmd);
+ if (ret)
+ IL_ERR("REPLY_CT_KILL_CONFIG_CMD failed\n");
+ else
+ D_INFO("REPLY_CT_KILL_CONFIG_CMD "
+ "succeeded, "
+ "critical temperature is %d\n",
+ il->hw_params.ct_kill_threshold);
+}
+
+static const s8 default_queue_to_tx_fifo[] = {
+ IL_TX_FIFO_VO,
+ IL_TX_FIFO_VI,
+ IL_TX_FIFO_BE,
+ IL_TX_FIFO_BK,
+ IL49_CMD_FIFO_NUM,
+ IL_TX_FIFO_UNUSED,
+ IL_TX_FIFO_UNUSED,
+};
+
+static int il4965_alive_notify(struct il_priv *il)
+{
+ u32 a;
+ unsigned long flags;
+ int i, chan;
+ u32 reg_val;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ /* Clear 4965's internal Tx Scheduler data base */
+ il->scd_base_addr = il_rd_prph(il,
+ IL49_SCD_SRAM_BASE_ADDR);
+ a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
+ for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
+ il_write_targ_mem(il, a, 0);
+ for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
+ il_write_targ_mem(il, a, 0);
+ for (; a < il->scd_base_addr +
+ IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); a += 4)
+ il_write_targ_mem(il, a, 0);
+
+ /* Tel 4965 where to find Tx byte count tables */
+ il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR,
+ il->scd_bc_tbls.dma >> 10);
+
+ /* Enable DMA channel */
+ for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
+ il_wr(il,
+ FH_TCSR_CHNL_TX_CONFIG_REG(chan),
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
+ FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
+
+ /* Update FH chicken bits */
+ reg_val = il_rd(il, FH_TX_CHICKEN_BITS_REG);
+ il_wr(il, FH_TX_CHICKEN_BITS_REG,
+ reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
+
+ /* Disable chain mode for all queues */
+ il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
+
+ /* Initialize each Tx queue (including the command queue) */
+ for (i = 0; i < il->hw_params.max_txq_num; i++) {
+
+ /* TFD circular buffer read/write idxes */
+ il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
+ il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
+
+ /* Max Tx Window size for Scheduler-ACK mode */
+ il_write_targ_mem(il, il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
+ (SCD_WIN_SIZE <<
+ IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
+ IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
+
+ /* Frame limit */
+ il_write_targ_mem(il, il->scd_base_addr +
+ IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
+ sizeof(u32),
+ (SCD_FRAME_LIMIT <<
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
+ IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
+
+ }
+ il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
+ (1 << il->hw_params.max_txq_num) - 1);
+
+ /* Activate all Tx DMA/FIFO channels */
+ il4965_txq_set_sched(il, IL_MASK(0, 6));
+
+ il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);
+
+ /* make sure all queue are not stopped */
+ memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
+ for (i = 0; i < 4; i++)
+ atomic_set(&il->queue_stop_count[i], 0);
+
+ /* reset to 0 to enable all the queue first */
+ il->txq_ctx_active_msk = 0;
+ /* Map each Tx/cmd queue to its corresponding fifo */
+ BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
+
+ for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
+ int ac = default_queue_to_tx_fifo[i];
+
+ il_txq_ctx_activate(il, i);
+
+ if (ac == IL_TX_FIFO_UNUSED)
+ continue;
+
+ il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
+ }
+
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ return 0;
+}
+
+/**
+ * il4965_alive_start - called after REPLY_ALIVE notification received
+ * from protocol/runtime uCode (initialization uCode's
+ * Alive gets handled by il_init_alive_start()).
+ */
+static void il4965_alive_start(struct il_priv *il)
+{
+ int ret = 0;
+ struct il_rxon_context *ctx = &il->ctx;
+
+ D_INFO("Runtime Alive received.\n");
+
+ if (il->card_alive.is_valid != UCODE_VALID_OK) {
+ /* We had an error bringing up the hardware, so take it
+ * all the way back down so we can try again */
+ D_INFO("Alive failed.\n");
+ goto restart;
+ }
+
+ /* Initialize uCode has loaded Runtime uCode ... verify inst image.
+ * This is a paranoid check, because we would not have gotten the
+ * "runtime" alive if code weren't properly loaded. */
+ if (il4965_verify_ucode(il)) {
+ /* Runtime instruction load was bad;
+ * take it all the way back down so we can try again */
+ D_INFO("Bad runtime uCode load.\n");
+ goto restart;
+ }
+
+ ret = il4965_alive_notify(il);
+ if (ret) {
+ IL_WARN(
+ "Could not complete ALIVE transition [ntf]: %d\n", ret);
+ goto restart;
+ }
+
+
+ /* After the ALIVE response, we can send host commands to the uCode */
+ set_bit(STATUS_ALIVE, &il->status);
+
+ /* Enable watchdog to monitor the driver tx queues */
+ il_setup_watchdog(il);
+
+ if (il_is_rfkill(il))
+ return;
+
+ ieee80211_wake_queues(il->hw);
+
+ il->active_rate = RATES_MASK;
+
+ if (il_is_associated_ctx(ctx)) {
+ struct il_rxon_cmd *active_rxon =
+ (struct il_rxon_cmd *)&ctx->active;
+ /* apply any changes in staging */
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ } else {
+ /* Initialize our rx_config data */
+ il_connection_init_rx_config(il, &il->ctx);
+
+ if (il->cfg->ops->hcmd->set_rxon_chain)
+ il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+ }
+
+ /* Configure bluetooth coexistence if enabled */
+ il_send_bt_config(il);
+
+ il4965_reset_run_time_calib(il);
+
+ set_bit(STATUS_READY, &il->status);
+
+ /* Configure the adapter for unassociated operation */
+ il_commit_rxon(il, ctx);
+
+ /* At this point, the NIC is initialized and operational */
+ il4965_rf_kill_ct_config(il);
+
+ D_INFO("ALIVE processing complete.\n");
+ wake_up(&il->wait_command_queue);
+
+ il_power_update_mode(il, true);
+ D_INFO("Updated power mode\n");
+
+ return;
+
+ restart:
+ queue_work(il->workqueue, &il->restart);
+}
+
+static void il4965_cancel_deferred_work(struct il_priv *il);
+
+static void __il4965_down(struct il_priv *il)
+{
+ unsigned long flags;
+ int exit_pending;
+
+ D_INFO(DRV_NAME " is going down\n");
+
+ il_scan_cancel_timeout(il, 200);
+
+ exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
+ * to prevent rearm timer */
+ del_timer_sync(&il->watchdog);
+
+ il_clear_ucode_stations(il, NULL);
+ il_dealloc_bcast_stations(il);
+ il_clear_driver_stations(il);
+
+ /* Unblock any waiting calls */
+ wake_up_all(&il->wait_command_queue);
+
+ /* Wipe out the EXIT_PENDING status bit if we are not actually
+ * exiting the module */
+ if (!exit_pending)
+ clear_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* stop and reset the on-board processor */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ /* tell the device to stop sending interrupts */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+ il4965_synchronize_irq(il);
+
+ if (il->mac80211_registered)
+ ieee80211_stop_queues(il->hw);
+
+ /* If we have not previously called il_init() then
+ * clear all bits but the RF Kill bit and return */
+ if (!il_is_init(il)) {
+ il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
+ STATUS_RF_KILL_HW |
+ test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
+ STATUS_GEO_CONFIGURED |
+ test_bit(STATUS_EXIT_PENDING, &il->status) <<
+ STATUS_EXIT_PENDING;
+ goto exit;
+ }
+
+ /* ...otherwise clear out all the status bits but the RF Kill
+ * bit and continue taking the NIC down. */
+ il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
+ STATUS_RF_KILL_HW |
+ test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
+ STATUS_GEO_CONFIGURED |
+ test_bit(STATUS_FW_ERROR, &il->status) <<
+ STATUS_FW_ERROR |
+ test_bit(STATUS_EXIT_PENDING, &il->status) <<
+ STATUS_EXIT_PENDING;
+
+ il4965_txq_ctx_stop(il);
+ il4965_rxq_stop(il);
+
+ /* Power-down device's busmaster DMA clocks */
+ il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
+ udelay(5);
+
+ /* Make sure (redundant) we've released our request to stay awake */
+ il_clear_bit(il, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+
+ /* Stop the device, and put it in low power state */
+ il_apm_stop(il);
+
+ exit:
+ memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
+
+ dev_kfree_skb(il->beacon_skb);
+ il->beacon_skb = NULL;
+
+ /* clear out any free frames */
+ il4965_clear_free_frames(il);
+}
+
+static void il4965_down(struct il_priv *il)
+{
+ mutex_lock(&il->mutex);
+ __il4965_down(il);
+ mutex_unlock(&il->mutex);
+
+ il4965_cancel_deferred_work(il);
+}
+
+#define HW_READY_TIMEOUT (50)
+
+static int il4965_set_hw_ready(struct il_priv *il)
+{
+ int ret = 0;
+
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
+
+ /* See if we got it */
+ ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
+ HW_READY_TIMEOUT);
+ if (ret != -ETIMEDOUT)
+ il->hw_ready = true;
+ else
+ il->hw_ready = false;
+
+ D_INFO("hardware %s\n",
+ (il->hw_ready == 1) ? "ready" : "not ready");
+ return ret;
+}
+
+static int il4965_prepare_card_hw(struct il_priv *il)
+{
+ int ret = 0;
+
+ D_INFO("il4965_prepare_card_hw enter\n");
+
+ ret = il4965_set_hw_ready(il);
+ if (il->hw_ready)
+ return ret;
+
+ /* If HW is not ready, prepare the conditions to check again */
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_PREPARE);
+
+ ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
+ ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
+ CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
+
+ /* HW should be ready by now, check again. */
+ if (ret != -ETIMEDOUT)
+ il4965_set_hw_ready(il);
+
+ return ret;
+}
+
+#define MAX_HW_RESTARTS 5
+
+static int __il4965_up(struct il_priv *il)
+{
+ int i;
+ int ret;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ IL_WARN("Exit pending; will not bring the NIC up\n");
+ return -EIO;
+ }
+
+ if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
+ IL_ERR("ucode not available for device bringup\n");
+ return -EIO;
+ }
+
+ ret = il4965_alloc_bcast_station(il, &il->ctx);
+ if (ret) {
+ il_dealloc_bcast_stations(il);
+ return ret;
+ }
+
+ il4965_prepare_card_hw(il);
+
+ if (!il->hw_ready) {
+ IL_WARN("Exit HW not ready\n");
+ return -EIO;
+ }
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (_il_rd(il,
+ CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+
+ if (il_is_rfkill(il)) {
+ wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
+
+ il_enable_interrupts(il);
+ IL_WARN("Radio disabled by HW RF Kill switch\n");
+ return 0;
+ }
+
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+
+ /* must be initialised before il_hw_nic_init */
+ il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;
+
+ ret = il4965_hw_nic_init(il);
+ if (ret) {
+ IL_ERR("Unable to init nic\n");
+ return ret;
+ }
+
+ /* make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
+ CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
+
+ /* clear (again), then enable host interrupts */
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+ il_enable_interrupts(il);
+
+ /* really make sure rfkill handshake bits are cleared */
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+ _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
+
+ /* Copy original ucode data image from disk into backup cache.
+ * This will be used to initialize the on-board processor's
+ * data SRAM for a clean start when the runtime program first loads. */
+ memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
+ il->ucode_data.len);
+
+ for (i = 0; i < MAX_HW_RESTARTS; i++) {
+
+ /* load bootstrap state machine,
+ * load bootstrap program into processor's memory,
+ * prepare to load the "initialize" uCode */
+ ret = il->cfg->ops->lib->load_ucode(il);
+
+ if (ret) {
+ IL_ERR("Unable to set up bootstrap uCode: %d\n",
+ ret);
+ continue;
+ }
+
+ /* start card; "initialize" will load runtime ucode */
+ il4965_nic_start(il);
+
+ D_INFO(DRV_NAME " is coming up\n");
+
+ return 0;
+ }
+
+ set_bit(STATUS_EXIT_PENDING, &il->status);
+ __il4965_down(il);
+ clear_bit(STATUS_EXIT_PENDING, &il->status);
+
+ /* tried to restart and config the device for as long as our
+ * patience could withstand */
+ IL_ERR("Unable to initialize device after %d attempts.\n", i);
+ return -EIO;
+}
+
+
+/*****************************************************************************
+ *
+ * Workqueue callbacks
+ *
+ *****************************************************************************/
+
+static void il4965_bg_init_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, init_alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ goto out;
+
+ il->cfg->ops->lib->init_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void il4965_bg_alive_start(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, alive_start.work);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ goto out;
+
+ il4965_alive_start(il);
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void il4965_bg_run_time_calib_work(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ run_time_calib_work);
+
+ mutex_lock(&il->mutex);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
+ test_bit(STATUS_SCANNING, &il->status)) {
+ mutex_unlock(&il->mutex);
+ return;
+ }
+
+ if (il->start_calib) {
+ il4965_chain_noise_calibration(il,
+ (void *)&il->_4965.stats);
+ il4965_sensitivity_calibration(il,
+ (void *)&il->_4965.stats);
+ }
+
+ mutex_unlock(&il->mutex);
+}
+
+static void il4965_bg_restart(struct work_struct *data)
+{
+ struct il_priv *il = container_of(data, struct il_priv, restart);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
+ mutex_lock(&il->mutex);
+ il->ctx.vif = NULL;
+ il->is_open = 0;
+
+ __il4965_down(il);
+
+ mutex_unlock(&il->mutex);
+ il4965_cancel_deferred_work(il);
+ ieee80211_restart_hw(il->hw);
+ } else {
+ il4965_down(il);
+
+ mutex_lock(&il->mutex);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
+ mutex_unlock(&il->mutex);
+ return;
+ }
+
+ __il4965_up(il);
+ mutex_unlock(&il->mutex);
+ }
+}
+
+static void il4965_bg_rx_replenish(struct work_struct *data)
+{
+ struct il_priv *il =
+ container_of(data, struct il_priv, rx_replenish);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ mutex_lock(&il->mutex);
+ il4965_rx_replenish(il);
+ mutex_unlock(&il->mutex);
+}
+
+/*****************************************************************************
+ *
+ * mac80211 entry point functions
+ *
+ *****************************************************************************/
+
+#define UCODE_READY_TIMEOUT (4 * HZ)
+
+/*
+ * Not a mac80211 entry point function, but it fits in with all the
+ * other mac80211 functions grouped here.
+ */
+static int il4965_mac_setup_register(struct il_priv *il,
+ u32 max_probe_length)
+{
+ int ret;
+ struct ieee80211_hw *hw = il->hw;
+
+ hw->rate_control_algorithm = "iwl-4965-rs";
+
+ /* Tell mac80211 our characteristics */
+ hw->flags = IEEE80211_HW_SIGNAL_DBM |
+ IEEE80211_HW_AMPDU_AGGREGATION |
+ IEEE80211_HW_NEED_DTIM_PERIOD |
+ IEEE80211_HW_SPECTRUM_MGMT |
+ IEEE80211_HW_REPORTS_TX_ACK_STATUS;
+
+ if (il->cfg->sku & IL_SKU_N)
+ hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
+ IEEE80211_HW_SUPPORTS_STATIC_SMPS;
+
+ hw->sta_data_size = sizeof(struct il_station_priv);
+ hw->vif_data_size = sizeof(struct il_vif_priv);
+
+ hw->wiphy->interface_modes |= il->ctx.interface_modes;
+ hw->wiphy->interface_modes |= il->ctx.exclusive_interface_modes;
+
+ hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
+ WIPHY_FLAG_DISABLE_BEACON_HINTS;
+
+ /*
+ * For now, disable PS by default because it affects
+ * RX performance significantly.
+ */
+ hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
+
+ hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
+ /* we create the 802.11 header and a zero-length SSID element */
+ hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;
+
+ /* Default value; 4 EDCA QOS priorities */
+ hw->queues = 4;
+
+ hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;
+
+ if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
+ &il->bands[IEEE80211_BAND_2GHZ];
+ if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
+ il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
+ &il->bands[IEEE80211_BAND_5GHZ];
+
+ il_leds_init(il);
+
+ ret = ieee80211_register_hw(il->hw);
+ if (ret) {
+ IL_ERR("Failed to register hw (error %d)\n", ret);
+ return ret;
+ }
+ il->mac80211_registered = 1;
+
+ return 0;
+}
+
+
+int il4965_mac_start(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+ int ret;
+
+ D_MAC80211("enter\n");
+
+ /* we should be verifying the device is ready to be opened */
+ mutex_lock(&il->mutex);
+ ret = __il4965_up(il);
+ mutex_unlock(&il->mutex);
+
+ if (ret)
+ return ret;
+
+ if (il_is_rfkill(il))
+ goto out;
+
+ D_INFO("Start UP work done.\n");
+
+ /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
+ * mac80211 will not be run successfully. */
+ ret = wait_event_timeout(il->wait_command_queue,
+ test_bit(STATUS_READY, &il->status),
+ UCODE_READY_TIMEOUT);
+ if (!ret) {
+ if (!test_bit(STATUS_READY, &il->status)) {
+ IL_ERR("START_ALIVE timeout after %dms.\n",
+ jiffies_to_msecs(UCODE_READY_TIMEOUT));
+ return -ETIMEDOUT;
+ }
+ }
+
+ il4965_led_enable(il);
+
+out:
+ il->is_open = 1;
+ D_MAC80211("leave\n");
+ return 0;
+}
+
+void il4965_mac_stop(struct ieee80211_hw *hw)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MAC80211("enter\n");
+
+ if (!il->is_open)
+ return;
+
+ il->is_open = 0;
+
+ il4965_down(il);
+
+ flush_workqueue(il->workqueue);
+
+ /* User space software may expect getting rfkill changes
+ * even if interface is down */
+ _il_wr(il, CSR_INT, 0xFFFFFFFF);
+ il_enable_rfkill_int(il);
+
+ D_MAC80211("leave\n");
+}
+
+void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ struct il_priv *il = hw->priv;
+
+ D_MACDUMP("enter\n");
+
+ D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
+ ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
+
+ if (il4965_tx_skb(il, skb))
+ dev_kfree_skb_any(skb);
+
+ D_MACDUMP("leave\n");
+}
+
+void il4965_mac_update_tkip_key(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_key_conf *keyconf,
+ struct ieee80211_sta *sta,
+ u32 iv32, u16 *phase1key)
+{
+ struct il_priv *il = hw->priv;
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+
+ D_MAC80211("enter\n");
+
+ il4965_update_tkip_key(il, vif_priv->ctx, keyconf, sta,
+ iv32, phase1key);
+
+ D_MAC80211("leave\n");
+}
+
+int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
+ struct ieee80211_vif *vif, struct ieee80211_sta *sta,
+ struct ieee80211_key_conf *key)
+{
+ struct il_priv *il = hw->priv;
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+ struct il_rxon_context *ctx = vif_priv->ctx;
+ int ret;
+ u8 sta_id;
+ bool is_default_wep_key = false;
+
+ D_MAC80211("enter\n");
+
+ if (il->cfg->mod_params->sw_crypto) {
+ D_MAC80211("leave - hwcrypto disabled\n");
+ return -EOPNOTSUPP;
+ }
+
+ sta_id = il_sta_id_or_broadcast(il, vif_priv->ctx, sta);
+ if (sta_id == IL_INVALID_STATION)
+ return -EINVAL;
+
+ mutex_lock(&il->mutex);
+ il_scan_cancel_timeout(il, 100);
+
+ /*
+ * If we are getting WEP group key and we didn't receive any key mapping
+ * so far, we are in legacy wep mode (group key only), otherwise we are
+ * in 1X mode.
+ * In legacy wep mode, we use another host command to the uCode.
+ */
+ if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
+ key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
+ !sta) {
+ if (cmd == SET_KEY)
+ is_default_wep_key = !ctx->key_mapping_keys;
+ else
+ is_default_wep_key =
+ (key->hw_key_idx == HW_KEY_DEFAULT);
+ }
+
+ switch (cmd) {
+ case SET_KEY:
+ if (is_default_wep_key)
+ ret = il4965_set_default_wep_key(il,
+ vif_priv->ctx, key);
+ else
+ ret = il4965_set_dynamic_key(il, vif_priv->ctx,
+ key, sta_id);
+
+ D_MAC80211("enable hwcrypto key\n");
+ break;
+ case DISABLE_KEY:
+ if (is_default_wep_key)
+ ret = il4965_remove_default_wep_key(il, ctx, key);
+ else
+ ret = il4965_remove_dynamic_key(il, ctx,
+ key, sta_id);
+
+ D_MAC80211("disable hwcrypto key\n");
+ break;
+ default:
+ ret = -EINVAL;
+ }
+
+ mutex_unlock(&il->mutex);
+ D_MAC80211("leave\n");
+
+ return ret;
+}
+
+int il4965_mac_ampdu_action(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ enum ieee80211_ampdu_mlme_action action,
+ struct ieee80211_sta *sta, u16 tid, u16 *ssn,
+ u8 buf_size)
+{
+ struct il_priv *il = hw->priv;
+ int ret = -EINVAL;
+
+ D_HT("A-MPDU action on addr %pM tid %d\n",
+ sta->addr, tid);
+
+ if (!(il->cfg->sku & IL_SKU_N))
+ return -EACCES;
+
+ mutex_lock(&il->mutex);
+
+ switch (action) {
+ case IEEE80211_AMPDU_RX_START:
+ D_HT("start Rx\n");
+ ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
+ break;
+ case IEEE80211_AMPDU_RX_STOP:
+ D_HT("stop Rx\n");
+ ret = il4965_sta_rx_agg_stop(il, sta, tid);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ ret = 0;
+ break;
+ case IEEE80211_AMPDU_TX_START:
+ D_HT("start Tx\n");
+ ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
+ break;
+ case IEEE80211_AMPDU_TX_STOP:
+ D_HT("stop Tx\n");
+ ret = il4965_tx_agg_stop(il, vif, sta, tid);
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ ret = 0;
+ break;
+ case IEEE80211_AMPDU_TX_OPERATIONAL:
+ ret = 0;
+ break;
+ }
+ mutex_unlock(&il->mutex);
+
+ return ret;
+}
+
+int il4965_mac_sta_add(struct ieee80211_hw *hw,
+ struct ieee80211_vif *vif,
+ struct ieee80211_sta *sta)
+{
+ struct il_priv *il = hw->priv;
+ struct il_station_priv *sta_priv = (void *)sta->drv_priv;
+ struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
+ bool is_ap = vif->type == NL80211_IFTYPE_STATION;
+ int ret;
+ u8 sta_id;
+
+ D_INFO("received request to add station %pM\n",
+ sta->addr);
+ mutex_lock(&il->mutex);
+ D_INFO("proceeding to add station %pM\n",
+ sta->addr);
+ sta_priv->common.sta_id = IL_INVALID_STATION;
+
+ atomic_set(&sta_priv->pending_frames, 0);
+
+ ret = il_add_station_common(il, vif_priv->ctx, sta->addr,
+ is_ap, sta, &sta_id);
+ if (ret) {
+ IL_ERR("Unable to add station %pM (%d)\n",
+ sta->addr, ret);
+ /* Should we return success if return code is EEXIST ? */
+ mutex_unlock(&il->mutex);
+ return ret;
+ }
+
+ sta_priv->common.sta_id = sta_id;
+
+ /* Initialize rate scaling */
+ D_INFO("Initializing rate scaling for station %pM\n",
+ sta->addr);
+ il4965_rs_rate_init(il, sta, sta_id);
+ mutex_unlock(&il->mutex);
+
+ return 0;
+}
+
+void il4965_mac_channel_switch(struct ieee80211_hw *hw,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ struct il_priv *il = hw->priv;
+ const struct il_channel_info *ch_info;
+ struct ieee80211_conf *conf = &hw->conf;
+ struct ieee80211_channel *channel = ch_switch->channel;
+ struct il_ht_config *ht_conf = &il->current_ht_config;
+
+ struct il_rxon_context *ctx = &il->ctx;
+ u16 ch;
+
+ D_MAC80211("enter\n");
+
+ mutex_lock(&il->mutex);
+
+ if (il_is_rfkill(il))
+ goto out;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
+ test_bit(STATUS_SCANNING, &il->status) ||
+ test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status))
+ goto out;
+
+ if (!il_is_associated_ctx(ctx))
+ goto out;
+
+ if (!il->cfg->ops->lib->set_channel_switch)
+ goto out;
+
+ ch = channel->hw_value;
+ if (le16_to_cpu(ctx->active.channel) == ch)
+ goto out;
+
+ ch_info = il_get_channel_info(il, channel->band, ch);
+ if (!il_is_channel_valid(ch_info)) {
+ D_MAC80211("invalid channel\n");
+ goto out;
+ }
+
+ spin_lock_irq(&il->lock);
+
+ il->current_ht_config.smps = conf->smps_mode;
+
+ /* Configure HT40 channels */
+ ctx->ht.enabled = conf_is_ht(conf);
+ if (ctx->ht.enabled) {
+ if (conf_is_ht40_minus(conf)) {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_BELOW;
+ ctx->ht.is_40mhz = true;
+ } else if (conf_is_ht40_plus(conf)) {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
+ ctx->ht.is_40mhz = true;
+ } else {
+ ctx->ht.extension_chan_offset =
+ IEEE80211_HT_PARAM_CHA_SEC_NONE;
+ ctx->ht.is_40mhz = false;
+ }
+ } else
+ ctx->ht.is_40mhz = false;
+
+ if ((le16_to_cpu(ctx->staging.channel) != ch))
+ ctx->staging.flags = 0;
+
+ il_set_rxon_channel(il, channel, ctx);
+ il_set_rxon_ht(il, ht_conf);
+ il_set_flags_for_band(il, ctx, channel->band, ctx->vif);
+
+ spin_unlock_irq(&il->lock);
+
+ il_set_rate(il);
+ /*
+ * at this point, staging_rxon has the
+ * configuration for channel switch
+ */
+ set_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
+ il->switch_channel = cpu_to_le16(ch);
+ if (il->cfg->ops->lib->set_channel_switch(il, ch_switch)) {
+ clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
+ il->switch_channel = 0;
+ ieee80211_chswitch_done(ctx->vif, false);
+ }
+
+out:
+ mutex_unlock(&il->mutex);
+ D_MAC80211("leave\n");
+}
+
+void il4965_configure_filter(struct ieee80211_hw *hw,
+ unsigned int changed_flags,
+ unsigned int *total_flags,
+ u64 multicast)
+{
+ struct il_priv *il = hw->priv;
+ __le32 filter_or = 0, filter_nand = 0;
+
+#define CHK(test, flag) do { \
+ if (*total_flags & (test)) \
+ filter_or |= (flag); \
+ else \
+ filter_nand |= (flag); \
+ } while (0)
+
+ D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
+ changed_flags, *total_flags);
+
+ CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
+ /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
+ CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
+ CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
+
+#undef CHK
+
+ mutex_lock(&il->mutex);
+
+ il->ctx.staging.filter_flags &= ~filter_nand;
+ il->ctx.staging.filter_flags |= filter_or;
+
+ /*
+ * Not committing directly because hardware can perform a scan,
+ * but we'll eventually commit the filter flags change anyway.
+ */
+
+ mutex_unlock(&il->mutex);
+
+ /*
+ * Receiving all multicast frames is always enabled by the
+ * default flags setup in il_connection_init_rx_config()
+ * since we currently do not support programming multicast
+ * filters into the device.
+ */
+ *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
+ FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
+}
+
+/*****************************************************************************
+ *
+ * driver setup and teardown
+ *
+ *****************************************************************************/
+
+static void il4965_bg_txpower_work(struct work_struct *work)
+{
+ struct il_priv *il = container_of(work, struct il_priv,
+ txpower_work);
+
+ mutex_lock(&il->mutex);
+
+ /* If a scan happened to start before we got here
+ * then just return; the stats notification will
+ * kick off another scheduled work to compensate for
+ * any temperature delta we missed here. */
+ if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
+ test_bit(STATUS_SCANNING, &il->status))
+ goto out;
+
+ /* Regardless of if we are associated, we must reconfigure the
+ * TX power since frames can be sent on non-radar channels while
+ * not associated */
+ il->cfg->ops->lib->send_tx_power(il);
+
+ /* Update last_temperature to keep is_calib_needed from running
+ * when it isn't needed... */
+ il->last_temperature = il->temperature;
+out:
+ mutex_unlock(&il->mutex);
+}
+
+static void il4965_setup_deferred_work(struct il_priv *il)
+{
+ il->workqueue = create_singlethread_workqueue(DRV_NAME);
+
+ init_waitqueue_head(&il->wait_command_queue);
+
+ INIT_WORK(&il->restart, il4965_bg_restart);
+ INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
+ INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
+ INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
+ INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);
+
+ il_setup_scan_deferred_work(il);
+
+ INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);
+
+ init_timer(&il->stats_periodic);
+ il->stats_periodic.data = (unsigned long)il;
+ il->stats_periodic.function = il4965_bg_stats_periodic;
+
+ init_timer(&il->watchdog);
+ il->watchdog.data = (unsigned long)il;
+ il->watchdog.function = il_bg_watchdog;
+
+ tasklet_init(&il->irq_tasklet, (void (*)(unsigned long))
+ il4965_irq_tasklet, (unsigned long)il);
+}
+
+static void il4965_cancel_deferred_work(struct il_priv *il)
+{
+ cancel_work_sync(&il->txpower_work);
+ cancel_delayed_work_sync(&il->init_alive_start);
+ cancel_delayed_work(&il->alive_start);
+ cancel_work_sync(&il->run_time_calib_work);
+
+ il_cancel_scan_deferred_work(il);
+
+ del_timer_sync(&il->stats_periodic);
+}
+
+static void il4965_init_hw_rates(struct il_priv *il,
+ struct ieee80211_rate *rates)
+{
+ int i;
+
+ for (i = 0; i < RATE_COUNT_LEGACY; i++) {
+ rates[i].bitrate = il_rates[i].ieee * 5;
+ rates[i].hw_value = i; /* Rate scaling will work on idxes */
+ rates[i].hw_value_short = i;
+ rates[i].flags = 0;
+ if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
+ /*
+ * If CCK != 1M then set short preamble rate flag.
+ */
+ rates[i].flags |=
+ (il_rates[i].plcp == RATE_1M_PLCP) ?
+ 0 : IEEE80211_RATE_SHORT_PREAMBLE;
+ }
+ }
+}
+/*
+ * Acquire il->lock before calling this function !
+ */
+void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
+{
+ il_wr(il, HBUS_TARG_WRPTR,
+ (idx & 0xff) | (txq_id << 8));
+ il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
+}
+
+void il4965_tx_queue_set_status(struct il_priv *il,
+ struct il_tx_queue *txq,
+ int tx_fifo_id, int scd_retry)
+{
+ int txq_id = txq->q.id;
+
+ /* Find out whether to activate Tx queue */
+ int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
+
+ /* Set up and activate */
+ il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
+ (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
+ (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
+ (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
+ (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
+ IL49_SCD_QUEUE_STTS_REG_MSK);
+
+ txq->sched_retry = scd_retry;
+
+ D_INFO("%s %s Queue %d on AC %d\n",
+ active ? "Activate" : "Deactivate",
+ scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
+}
+
+
+static int il4965_init_drv(struct il_priv *il)
+{
+ int ret;
+
+ spin_lock_init(&il->sta_lock);
+ spin_lock_init(&il->hcmd_lock);
+
+ INIT_LIST_HEAD(&il->free_frames);
+
+ mutex_init(&il->mutex);
+
+ il->ieee_channels = NULL;
+ il->ieee_rates = NULL;
+ il->band = IEEE80211_BAND_2GHZ;
+
+ il->iw_mode = NL80211_IFTYPE_STATION;
+ il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
+ il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
+
+ /* initialize force reset */
+ il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
+
+ /* Choose which receivers/antennas to use */
+ if (il->cfg->ops->hcmd->set_rxon_chain)
+ il->cfg->ops->hcmd->set_rxon_chain(il,
+ &il->ctx);
+
+ il_init_scan_params(il);
+
+ ret = il_init_channel_map(il);
+ if (ret) {
+ IL_ERR("initializing regulatory failed: %d\n", ret);
+ goto err;
+ }
+
+ ret = il_init_geos(il);
+ if (ret) {
+ IL_ERR("initializing geos failed: %d\n", ret);
+ goto err_free_channel_map;
+ }
+ il4965_init_hw_rates(il, il->ieee_rates);
+
+ return 0;
+
+err_free_channel_map:
+ il_free_channel_map(il);
+err:
+ return ret;
+}
+
+static void il4965_uninit_drv(struct il_priv *il)
+{
+ il4965_calib_free_results(il);
+ il_free_geos(il);
+ il_free_channel_map(il);
+ kfree(il->scan_cmd);
+}
+
+static void il4965_hw_detect(struct il_priv *il)
+{
+ il->hw_rev = _il_rd(il, CSR_HW_REV);
+ il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
+ il->rev_id = il->pci_dev->revision;
+ D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
+}
+
+static int il4965_set_hw_params(struct il_priv *il)
+{
+ il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
+ il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
+ if (il->cfg->mod_params->amsdu_size_8K)
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
+ else
+ il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);
+
+ il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;
+
+ if (il->cfg->mod_params->disable_11n)
+ il->cfg->sku &= ~IL_SKU_N;
+
+ /* Device-specific setup */
+ return il->cfg->ops->lib->set_hw_params(il);
+}
+
+static const u8 il4965_bss_ac_to_fifo[] = {
+ IL_TX_FIFO_VO,
+ IL_TX_FIFO_VI,
+ IL_TX_FIFO_BE,
+ IL_TX_FIFO_BK,
+};
+
+static const u8 il4965_bss_ac_to_queue[] = {
+ 0, 1, 2, 3,
+};
+
+static int
+il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int err = 0;
+ struct il_priv *il;
+ struct ieee80211_hw *hw;
+ struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
+ unsigned long flags;
+ u16 pci_cmd;
+
+ /************************
+ * 1. Allocating HW data
+ ************************/
+
+ hw = il_alloc_all(cfg);
+ if (!hw) {
+ err = -ENOMEM;
+ goto out;
+ }
+ il = hw->priv;
+ /* At this point both hw and il are allocated. */
+
+ il->ctx.ctxid = 0;
+
+ il->ctx.always_active = true;
+ il->ctx.is_active = true;
+ il->ctx.rxon_cmd = REPLY_RXON;
+ il->ctx.rxon_timing_cmd = REPLY_RXON_TIMING;
+ il->ctx.rxon_assoc_cmd = REPLY_RXON_ASSOC;
+ il->ctx.qos_cmd = REPLY_QOS_PARAM;
+ il->ctx.ap_sta_id = IL_AP_ID;
+ il->ctx.wep_key_cmd = REPLY_WEPKEY;
+ il->ctx.ac_to_fifo = il4965_bss_ac_to_fifo;
+ il->ctx.ac_to_queue = il4965_bss_ac_to_queue;
+ il->ctx.exclusive_interface_modes =
+ BIT(NL80211_IFTYPE_ADHOC);
+ il->ctx.interface_modes =
+ BIT(NL80211_IFTYPE_STATION);
+ il->ctx.ap_devtype = RXON_DEV_TYPE_AP;
+ il->ctx.ibss_devtype = RXON_DEV_TYPE_IBSS;
+ il->ctx.station_devtype = RXON_DEV_TYPE_ESS;
+ il->ctx.unused_devtype = RXON_DEV_TYPE_ESS;
+
+ SET_IEEE80211_DEV(hw, &pdev->dev);
+
+ D_INFO("*** LOAD DRIVER ***\n");
+ il->cfg = cfg;
+ il->pci_dev = pdev;
+ il->inta_mask = CSR_INI_SET_MASK;
+
+ if (il_alloc_traffic_mem(il))
+ IL_ERR("Not enough memory to generate traffic log\n");
+
+ /**************************
+ * 2. Initializing PCI bus
+ **************************/
+ pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
+ PCIE_LINK_STATE_CLKPM);
+
+ if (pci_enable_device(pdev)) {
+ err = -ENODEV;
+ goto out_ieee80211_free_hw;
+ }
+
+ pci_set_master(pdev);
+
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (!err)
+ err = pci_set_consistent_dma_mask(pdev,
+ DMA_BIT_MASK(32));
+ /* both attempts failed: */
+ if (err) {
+ IL_WARN("No suitable DMA available.\n");
+ goto out_pci_disable_device;
+ }
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err)
+ goto out_pci_disable_device;
+
+ pci_set_drvdata(pdev, il);
+
+
+ /***********************
+ * 3. Read REV register
+ ***********************/
+ il->hw_base = pci_iomap(pdev, 0, 0);
+ if (!il->hw_base) {
+ err = -ENODEV;
+ goto out_pci_release_regions;
+ }
+
+ D_INFO("pci_resource_len = 0x%08llx\n",
+ (unsigned long long) pci_resource_len(pdev, 0));
+ D_INFO("pci_resource_base = %p\n", il->hw_base);
+
+ /* these spin locks will be used in apm_ops.init and EEPROM access
+ * we should init now
+ */
+ spin_lock_init(&il->reg_lock);
+ spin_lock_init(&il->lock);
+
+ /*
+ * stop and reset the on-board processor just in case it is in a
+ * strange state ... like being left stranded by a primary kernel
+ * and this is now the kdump kernel trying to start up
+ */
+ _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
+
+ il4965_hw_detect(il);
+ IL_INFO("Detected %s, REV=0x%X\n",
+ il->cfg->name, il->hw_rev);
+
+ /* We disable the RETRY_TIMEOUT register (0x41) to keep
+ * PCI Tx retries from interfering with C3 CPU state */
+ pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
+
+ il4965_prepare_card_hw(il);
+ if (!il->hw_ready) {
+ IL_WARN("Failed, HW not ready\n");
+ goto out_iounmap;
+ }
+
+ /*****************
+ * 4. Read EEPROM
+ *****************/
+ /* Read the EEPROM */
+ err = il_eeprom_init(il);
+ if (err) {
+ IL_ERR("Unable to init EEPROM\n");
+ goto out_iounmap;
+ }
+ err = il4965_eeprom_check_version(il);
+ if (err)
+ goto out_free_eeprom;
+
+ if (err)
+ goto out_free_eeprom;
+
+ /* extract MAC Address */
+ il4965_eeprom_get_mac(il, il->addresses[0].addr);
+ D_INFO("MAC address: %pM\n", il->addresses[0].addr);
+ il->hw->wiphy->addresses = il->addresses;
+ il->hw->wiphy->n_addresses = 1;
+
+ /************************
+ * 5. Setup HW constants
+ ************************/
+ if (il4965_set_hw_params(il)) {
+ IL_ERR("failed to set hw parameters\n");
+ goto out_free_eeprom;
+ }
+
+ /*******************
+ * 6. Setup il
+ *******************/
+
+ err = il4965_init_drv(il);
+ if (err)
+ goto out_free_eeprom;
+ /* At this point both hw and il are initialized. */
+
+ /********************
+ * 7. Setup services
+ ********************/
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ pci_enable_msi(il->pci_dev);
+
+ err = request_irq(il->pci_dev->irq, il_isr,
+ IRQF_SHARED, DRV_NAME, il);
+ if (err) {
+ IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
+ goto out_disable_msi;
+ }
+
+ il4965_setup_deferred_work(il);
+ il4965_setup_rx_handlers(il);
+
+ /*********************************************
+ * 8. Enable interrupts and read RFKILL state
+ *********************************************/
+
+ /* enable rfkill interrupt: hw bug w/a */
+ pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
+ if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
+ pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
+ pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
+ }
+
+ il_enable_rfkill_int(il);
+
+ /* If platform's RF_KILL switch is NOT set to KILL */
+ if (_il_rd(il, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
+ clear_bit(STATUS_RF_KILL_HW, &il->status);
+ else
+ set_bit(STATUS_RF_KILL_HW, &il->status);
+
+ wiphy_rfkill_set_hw_state(il->hw->wiphy,
+ test_bit(STATUS_RF_KILL_HW, &il->status));
+
+ il_power_initialize(il);
+
+ init_completion(&il->_4965.firmware_loading_complete);
+
+ err = il4965_request_firmware(il, true);
+ if (err)
+ goto out_destroy_workqueue;
+
+ return 0;
+
+ out_destroy_workqueue:
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+ free_irq(il->pci_dev->irq, il);
+ out_disable_msi:
+ pci_disable_msi(il->pci_dev);
+ il4965_uninit_drv(il);
+ out_free_eeprom:
+ il_eeprom_free(il);
+ out_iounmap:
+ pci_iounmap(pdev, il->hw_base);
+ out_pci_release_regions:
+ pci_set_drvdata(pdev, NULL);
+ pci_release_regions(pdev);
+ out_pci_disable_device:
+ pci_disable_device(pdev);
+ out_ieee80211_free_hw:
+ il_free_traffic_mem(il);
+ ieee80211_free_hw(il->hw);
+ out:
+ return err;
+}
+
+static void __devexit il4965_pci_remove(struct pci_dev *pdev)
+{
+ struct il_priv *il = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ if (!il)
+ return;
+
+ wait_for_completion(&il->_4965.firmware_loading_complete);
+
+ D_INFO("*** UNLOAD DRIVER ***\n");
+
+ il_dbgfs_unregister(il);
+ sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);
+
+ /* ieee80211_unregister_hw call wil cause il_mac_stop to
+ * to be called and il4965_down since we are removing the device
+ * we need to set STATUS_EXIT_PENDING bit.
+ */
+ set_bit(STATUS_EXIT_PENDING, &il->status);
+
+ il_leds_exit(il);
+
+ if (il->mac80211_registered) {
+ ieee80211_unregister_hw(il->hw);
+ il->mac80211_registered = 0;
+ } else {
+ il4965_down(il);
+ }
+
+ /*
+ * Make sure device is reset to low power before unloading driver.
+ * This may be redundant with il4965_down(), but there are paths to
+ * run il4965_down() without calling apm_ops.stop(), and there are
+ * paths to avoid running il4965_down() at all before leaving driver.
+ * This (inexpensive) call *makes sure* device is reset.
+ */
+ il_apm_stop(il);
+
+ /* make sure we flush any pending irq or
+ * tasklet for the driver
+ */
+ spin_lock_irqsave(&il->lock, flags);
+ il_disable_interrupts(il);
+ spin_unlock_irqrestore(&il->lock, flags);
+
+ il4965_synchronize_irq(il);
+
+ il4965_dealloc_ucode_pci(il);
+
+ if (il->rxq.bd)
+ il4965_rx_queue_free(il, &il->rxq);
+ il4965_hw_txq_ctx_free(il);
+
+ il_eeprom_free(il);
+
+
+ /*netif_stop_queue(dev); */
+ flush_workqueue(il->workqueue);
+
+ /* ieee80211_unregister_hw calls il_mac_stop, which flushes
+ * il->workqueue... so we can't take down the workqueue
+ * until now... */
+ destroy_workqueue(il->workqueue);
+ il->workqueue = NULL;
+ il_free_traffic_mem(il);
+
+ free_irq(il->pci_dev->irq, il);
+ pci_disable_msi(il->pci_dev);
+ pci_iounmap(pdev, il->hw_base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+
+ il4965_uninit_drv(il);
+
+ dev_kfree_skb(il->beacon_skb);
+
+ ieee80211_free_hw(il->hw);
+}
+
+/*
+ * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
+ * must be called under il->lock and mac access
+ */
+void il4965_txq_set_sched(struct il_priv *il, u32 mask)
+{
+ il_wr_prph(il, IL49_SCD_TXFACT, mask);
+}
+
+/*****************************************************************************
+ *
+ * driver and module entry point
+ *
+ *****************************************************************************/
+
+/* Hardware specific file defines the PCI IDs table for that hardware module */
+static DEFINE_PCI_DEVICE_TABLE(il4965_hw_card_ids) = {
+ {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
+ {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
+ {0}
+};
+MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);
+
+static struct pci_driver il4965_driver = {
+ .name = DRV_NAME,
+ .id_table = il4965_hw_card_ids,
+ .probe = il4965_pci_probe,
+ .remove = __devexit_p(il4965_pci_remove),
+ .driver.pm = IL_LEGACY_PM_OPS,
+};
+
+static int __init il4965_init(void)
+{
+
+ int ret;
+ pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
+ pr_info(DRV_COPYRIGHT "\n");
+
+ ret = il4965_rate_control_register();
+ if (ret) {
+ pr_err("Unable to register rate control algorithm: %d\n", ret);
+ return ret;
+ }
+
+ ret = pci_register_driver(&il4965_driver);
+ if (ret) {
+ pr_err("Unable to initialize PCI module\n");
+ goto error_register;
+ }
+
+ return ret;
+
+error_register:
+ il4965_rate_control_unregister();
+ return ret;
+}
+
+static void __exit il4965_exit(void)
+{
+ pci_unregister_driver(&il4965_driver);
+ il4965_rate_control_unregister();
+}
+
+module_exit(il4965_exit);
+module_init(il4965_init);
+
+#ifdef CONFIG_IWLEGACY_DEBUG
+module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "debug output mask");
+#endif
+
+module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO);
+MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
+module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO);
+MODULE_PARM_DESC(queues_num, "number of hw queues.");
+module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO);
+MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
+module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K,
+ int, S_IRUGO);
+MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
+module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO);
+MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/sched.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <net/mac80211.h>
+#include <linux/etherdevice.h>
+#include <asm/unaligned.h>
+
+#include "iwl-eeprom.h"
+#include "iwl-dev.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-4965-calib.h"
+#include "iwl-sta.h"
+#include "iwl-4965-led.h"
+#include "iwl-4965.h"
+#include "iwl-4965-debugfs.h"
+
+static int il4965_send_tx_power(struct il_priv *il);
+static int il4965_hw_get_temperature(struct il_priv *il);
+
+/* Highest firmware API version supported */
+#define IL4965_UCODE_API_MAX 2
+
+/* Lowest firmware API version supported */
+#define IL4965_UCODE_API_MIN 2
+
+#define IL4965_FW_PRE "iwlwifi-4965-"
+#define _IL4965_MODULE_FIRMWARE(api) IL4965_FW_PRE #api ".ucode"
+#define IL4965_MODULE_FIRMWARE(api) _IL4965_MODULE_FIRMWARE(api)
+
+/* check contents of special bootstrap uCode SRAM */
+static int il4965_verify_bsm(struct il_priv *il)
+{
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ u32 reg;
+ u32 val;
+
+ D_INFO("Begin verify bsm\n");
+
+ /* verify BSM SRAM contents */
+ val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
+ for (reg = BSM_SRAM_LOWER_BOUND;
+ reg < BSM_SRAM_LOWER_BOUND + len;
+ reg += sizeof(u32), image++) {
+ val = il_rd_prph(il, reg);
+ if (val != le32_to_cpu(*image)) {
+ IL_ERR("BSM uCode verification failed at "
+ "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
+ BSM_SRAM_LOWER_BOUND,
+ reg - BSM_SRAM_LOWER_BOUND, len,
+ val, le32_to_cpu(*image));
+ return -EIO;
+ }
+ }
+
+ D_INFO("BSM bootstrap uCode image OK\n");
+
+ return 0;
+}
+
+/**
+ * il4965_load_bsm - Load bootstrap instructions
+ *
+ * BSM operation:
+ *
+ * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
+ * in special SRAM that does not power down during RFKILL. When powering back
+ * up after power-saving sleeps (or during initial uCode load), the BSM loads
+ * the bootstrap program into the on-board processor, and starts it.
+ *
+ * The bootstrap program loads (via DMA) instructions and data for a new
+ * program from host DRAM locations indicated by the host driver in the
+ * BSM_DRAM_* registers. Once the new program is loaded, it starts
+ * automatically.
+ *
+ * When initializing the NIC, the host driver points the BSM to the
+ * "initialize" uCode image. This uCode sets up some internal data, then
+ * notifies host via "initialize alive" that it is complete.
+ *
+ * The host then replaces the BSM_DRAM_* pointer values to point to the
+ * normal runtime uCode instructions and a backup uCode data cache buffer
+ * (filled initially with starting data values for the on-board processor),
+ * then triggers the "initialize" uCode to load and launch the runtime uCode,
+ * which begins normal operation.
+ *
+ * When doing a power-save shutdown, runtime uCode saves data SRAM into
+ * the backup data cache in DRAM before SRAM is powered down.
+ *
+ * When powering back up, the BSM loads the bootstrap program. This reloads
+ * the runtime uCode instructions and the backup data cache into SRAM,
+ * and re-launches the runtime uCode from where it left off.
+ */
+static int il4965_load_bsm(struct il_priv *il)
+{
+ __le32 *image = il->ucode_boot.v_addr;
+ u32 len = il->ucode_boot.len;
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+ u32 inst_len;
+ u32 data_len;
+ int i;
+ u32 done;
+ u32 reg_offset;
+ int ret;
+
+ D_INFO("Begin load bsm\n");
+
+ il->ucode_type = UCODE_RT;
+
+ /* make sure bootstrap program is no larger than BSM's SRAM size */
+ if (len > IL49_MAX_BSM_SIZE)
+ return -EINVAL;
+
+ /* Tell bootstrap uCode where to find the "Initialize" uCode
+ * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
+ * NOTE: il_init_alive_start() will replace these values,
+ * after the "initialize" uCode has run, to point to
+ * runtime/protocol instructions and backup data cache.
+ */
+ pinst = il->ucode_init.p_addr >> 4;
+ pdata = il->ucode_init_data.p_addr >> 4;
+ inst_len = il->ucode_init.len;
+ data_len = il->ucode_init_data.len;
+
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
+
+ /* Fill BSM memory with bootstrap instructions */
+ for (reg_offset = BSM_SRAM_LOWER_BOUND;
+ reg_offset < BSM_SRAM_LOWER_BOUND + len;
+ reg_offset += sizeof(u32), image++)
+ _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
+
+ ret = il4965_verify_bsm(il);
+ if (ret)
+ return ret;
+
+ /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
+ il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
+ il_wr_prph(il,
+ BSM_WR_MEM_DST_REG, IL49_RTC_INST_LOWER_BOUND);
+ il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
+
+ /* Load bootstrap code into instruction SRAM now,
+ * to prepare to load "initialize" uCode */
+ il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
+
+ /* Wait for load of bootstrap uCode to finish */
+ for (i = 0; i < 100; i++) {
+ done = il_rd_prph(il, BSM_WR_CTRL_REG);
+ if (!(done & BSM_WR_CTRL_REG_BIT_START))
+ break;
+ udelay(10);
+ }
+ if (i < 100)
+ D_INFO("BSM write complete, poll %d iterations\n", i);
+ else {
+ IL_ERR("BSM write did not complete!\n");
+ return -EIO;
+ }
+
+ /* Enable future boot loads whenever power management unit triggers it
+ * (e.g. when powering back up after power-save shutdown) */
+ il_wr_prph(il,
+ BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
+
+
+ return 0;
+}
+
+/**
+ * il4965_set_ucode_ptrs - Set uCode address location
+ *
+ * Tell initialization uCode where to find runtime uCode.
+ *
+ * BSM registers initially contain pointers to initialization uCode.
+ * We need to replace them to load runtime uCode inst and data,
+ * and to save runtime data when powering down.
+ */
+static int il4965_set_ucode_ptrs(struct il_priv *il)
+{
+ dma_addr_t pinst;
+ dma_addr_t pdata;
+ int ret = 0;
+
+ /* bits 35:4 for 4965 */
+ pinst = il->ucode_code.p_addr >> 4;
+ pdata = il->ucode_data_backup.p_addr >> 4;
+
+ /* Tell bootstrap uCode where to find image to load */
+ il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
+ il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
+ il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
+ il->ucode_data.len);
+
+ /* Inst byte count must be last to set up, bit 31 signals uCode
+ * that all new ptr/size info is in place */
+ il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
+ il->ucode_code.len | BSM_DRAM_INST_LOAD);
+ D_INFO("Runtime uCode pointers are set.\n");
+
+ return ret;
+}
+
+/**
+ * il4965_init_alive_start - Called after REPLY_ALIVE notification received
+ *
+ * Called after REPLY_ALIVE notification received from "initialize" uCode.
+ *
+ * The 4965 "initialize" ALIVE reply contains calibration data for:
+ * Voltage, temperature, and MIMO tx gain correction, now stored in il
+ * (3945 does not contain this data).
+ *
+ * Tell "initialize" uCode to go ahead and load the runtime uCode.
+*/
+static void il4965_init_alive_start(struct il_priv *il)
+{
+ /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
+ * This is a paranoid check, because we would not have gotten the
+ * "initialize" alive if code weren't properly loaded. */
+ if (il4965_verify_ucode(il)) {
+ /* Runtime instruction load was bad;
+ * take it all the way back down so we can try again */
+ D_INFO("Bad \"initialize\" uCode load.\n");
+ goto restart;
+ }
+
+ /* Calculate temperature */
+ il->temperature = il4965_hw_get_temperature(il);
+
+ /* Send pointers to protocol/runtime uCode image ... init code will
+ * load and launch runtime uCode, which will send us another "Alive"
+ * notification. */
+ D_INFO("Initialization Alive received.\n");
+ if (il4965_set_ucode_ptrs(il)) {
+ /* Runtime instruction load won't happen;
+ * take it all the way back down so we can try again */
+ D_INFO("Couldn't set up uCode pointers.\n");
+ goto restart;
+ }
+ return;
+
+restart:
+ queue_work(il->workqueue, &il->restart);
+}
+
+static bool iw4965_is_ht40_channel(__le32 rxon_flags)
+{
+ int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
+ >> RXON_FLG_CHANNEL_MODE_POS;
+ return (chan_mod == CHANNEL_MODE_PURE_40 ||
+ chan_mod == CHANNEL_MODE_MIXED);
+}
+
+static void il4965_nic_config(struct il_priv *il)
+{
+ unsigned long flags;
+ u16 radio_cfg;
+
+ spin_lock_irqsave(&il->lock, flags);
+
+ radio_cfg = il_eeprom_query16(il, EEPROM_RADIO_CONFIG);
+
+ /* write radio config values to register */
+ if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
+ EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
+ EEPROM_RF_CFG_DASH_MSK(radio_cfg));
+
+ /* set CSR_HW_CONFIG_REG for uCode use */
+ il_set_bit(il, CSR_HW_IF_CONFIG_REG,
+ CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
+ CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
+
+ il->calib_info = (struct il_eeprom_calib_info *)
+ il_eeprom_query_addr(il,
+ EEPROM_4965_CALIB_TXPOWER_OFFSET);
+
+ spin_unlock_irqrestore(&il->lock, flags);
+}
+
+/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
+ * Called after every association, but this runs only once!
+ * ... once chain noise is calibrated the first time, it's good forever. */
+static void il4965_chain_noise_reset(struct il_priv *il)
+{
+ struct il_chain_noise_data *data = &(il->chain_noise_data);
+
+ if (data->state == IL_CHAIN_NOISE_ALIVE &&
+ il_is_any_associated(il)) {
+ struct il_calib_diff_gain_cmd cmd;
+
+ /* clear data for chain noise calibration algorithm */
+ data->chain_noise_a = 0;
+ data->chain_noise_b = 0;
+ data->chain_noise_c = 0;
+ data->chain_signal_a = 0;
+ data->chain_signal_b = 0;
+ data->chain_signal_c = 0;
+ data->beacon_count = 0;
+
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD;
+ cmd.diff_gain_a = 0;
+ cmd.diff_gain_b = 0;
+ cmd.diff_gain_c = 0;
+ if (il_send_cmd_pdu(il, REPLY_PHY_CALIBRATION_CMD,
+ sizeof(cmd), &cmd))
+ IL_ERR(
+ "Could not send REPLY_PHY_CALIBRATION_CMD\n");
+ data->state = IL_CHAIN_NOISE_ACCUMULATE;
+ D_CALIB("Run chain_noise_calibrate\n");
+ }
+}
+
+static struct il_sensitivity_ranges il4965_sensitivity = {
+ .min_nrg_cck = 97,
+ .max_nrg_cck = 0, /* not used, set to 0 */
+
+ .auto_corr_min_ofdm = 85,
+ .auto_corr_min_ofdm_mrc = 170,
+ .auto_corr_min_ofdm_x1 = 105,
+ .auto_corr_min_ofdm_mrc_x1 = 220,
+
+ .auto_corr_max_ofdm = 120,
+ .auto_corr_max_ofdm_mrc = 210,
+ .auto_corr_max_ofdm_x1 = 140,
+ .auto_corr_max_ofdm_mrc_x1 = 270,
+
+ .auto_corr_min_cck = 125,
+ .auto_corr_max_cck = 200,
+ .auto_corr_min_cck_mrc = 200,
+ .auto_corr_max_cck_mrc = 400,
+
+ .nrg_th_cck = 100,
+ .nrg_th_ofdm = 100,
+
+ .barker_corr_th_min = 190,
+ .barker_corr_th_min_mrc = 390,
+ .nrg_th_cca = 62,
+};
+
+static void il4965_set_ct_threshold(struct il_priv *il)
+{
+ /* want Kelvin */
+ il->hw_params.ct_kill_threshold =
+ CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
+}
+
+/**
+ * il4965_hw_set_hw_params
+ *
+ * Called when initializing driver
+ */
+static int il4965_hw_set_hw_params(struct il_priv *il)
+{
+ if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
+ il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
+ il->cfg->base_params->num_of_queues =
+ il->cfg->mod_params->num_of_queues;
+
+ il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
+ il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
+ il->hw_params.scd_bc_tbls_size =
+ il->cfg->base_params->num_of_queues *
+ sizeof(struct il4965_scd_bc_tbl);
+ il->hw_params.tfd_size = sizeof(struct il_tfd);
+ il->hw_params.max_stations = IL4965_STATION_COUNT;
+ il->ctx.bcast_sta_id = IL4965_BROADCAST_ID;
+ il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
+ il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
+ il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
+ il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
+
+ il->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
+
+ il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
+ il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
+ il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
+ il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
+
+ il4965_set_ct_threshold(il);
+
+ il->hw_params.sens = &il4965_sensitivity;
+ il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
+
+ return 0;
+}
+
+static s32 il4965_math_div_round(s32 num, s32 denom, s32 *res)
+{
+ s32 sign = 1;
+
+ if (num < 0) {
+ sign = -sign;
+ num = -num;
+ }
+ if (denom < 0) {
+ sign = -sign;
+ denom = -denom;
+ }
+ *res = 1;
+ *res = ((num * 2 + denom) / (denom * 2)) * sign;
+
+ return 1;
+}
+
+/**
+ * il4965_get_voltage_compensation - Power supply voltage comp for txpower
+ *
+ * Determines power supply voltage compensation for txpower calculations.
+ * Returns number of 1/2-dB steps to subtract from gain table idx,
+ * to compensate for difference between power supply voltage during
+ * factory measurements, vs. current power supply voltage.
+ *
+ * Voltage indication is higher for lower voltage.
+ * Lower voltage requires more gain (lower gain table idx).
+ */
+static s32 il4965_get_voltage_compensation(s32 eeprom_voltage,
+ s32 current_voltage)
+{
+ s32 comp = 0;
+
+ if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage ||
+ TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage)
+ return 0;
+
+ il4965_math_div_round(current_voltage - eeprom_voltage,
+ TX_POWER_IL_VOLTAGE_CODES_PER_03V, &comp);
+
+ if (current_voltage > eeprom_voltage)
+ comp *= 2;
+ if ((comp < -2) || (comp > 2))
+ comp = 0;
+
+ return comp;
+}
+
+static s32 il4965_get_tx_atten_grp(u16 channel)
+{
+ if (channel >= CALIB_IL_TX_ATTEN_GR5_FCH &&
+ channel <= CALIB_IL_TX_ATTEN_GR5_LCH)
+ return CALIB_CH_GROUP_5;
+
+ if (channel >= CALIB_IL_TX_ATTEN_GR1_FCH &&
+ channel <= CALIB_IL_TX_ATTEN_GR1_LCH)
+ return CALIB_CH_GROUP_1;
+
+ if (channel >= CALIB_IL_TX_ATTEN_GR2_FCH &&
+ channel <= CALIB_IL_TX_ATTEN_GR2_LCH)
+ return CALIB_CH_GROUP_2;
+
+ if (channel >= CALIB_IL_TX_ATTEN_GR3_FCH &&
+ channel <= CALIB_IL_TX_ATTEN_GR3_LCH)
+ return CALIB_CH_GROUP_3;
+
+ if (channel >= CALIB_IL_TX_ATTEN_GR4_FCH &&
+ channel <= CALIB_IL_TX_ATTEN_GR4_LCH)
+ return CALIB_CH_GROUP_4;
+
+ return -EINVAL;
+}
+
+static u32 il4965_get_sub_band(const struct il_priv *il, u32 channel)
+{
+ s32 b = -1;
+
+ for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
+ if (il->calib_info->band_info[b].ch_from == 0)
+ continue;
+
+ if (channel >= il->calib_info->band_info[b].ch_from &&
+ channel <= il->calib_info->band_info[b].ch_to)
+ break;
+ }
+
+ return b;
+}
+
+static s32 il4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
+{
+ s32 val;
+
+ if (x2 == x1)
+ return y1;
+ else {
+ il4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
+ return val + y2;
+ }
+}
+
+/**
+ * il4965_interpolate_chan - Interpolate factory measurements for one channel
+ *
+ * Interpolates factory measurements from the two sample channels within a
+ * sub-band, to apply to channel of interest. Interpolation is proportional to
+ * differences in channel frequencies, which is proportional to differences
+ * in channel number.
+ */
+static int il4965_interpolate_chan(struct il_priv *il, u32 channel,
+ struct il_eeprom_calib_ch_info *chan_info)
+{
+ s32 s = -1;
+ u32 c;
+ u32 m;
+ const struct il_eeprom_calib_measure *m1;
+ const struct il_eeprom_calib_measure *m2;
+ struct il_eeprom_calib_measure *omeas;
+ u32 ch_i1;
+ u32 ch_i2;
+
+ s = il4965_get_sub_band(il, channel);
+ if (s >= EEPROM_TX_POWER_BANDS) {
+ IL_ERR("Tx Power can not find channel %d\n", channel);
+ return -1;
+ }
+
+ ch_i1 = il->calib_info->band_info[s].ch1.ch_num;
+ ch_i2 = il->calib_info->band_info[s].ch2.ch_num;
+ chan_info->ch_num = (u8) channel;
+
+ D_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
+ channel, s, ch_i1, ch_i2);
+
+ for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
+ for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
+ m1 = &(il->calib_info->band_info[s].ch1.
+ measurements[c][m]);
+ m2 = &(il->calib_info->band_info[s].ch2.
+ measurements[c][m]);
+ omeas = &(chan_info->measurements[c][m]);
+
+ omeas->actual_pow =
+ (u8) il4965_interpolate_value(channel, ch_i1,
+ m1->actual_pow,
+ ch_i2,
+ m2->actual_pow);
+ omeas->gain_idx =
+ (u8) il4965_interpolate_value(channel, ch_i1,
+ m1->gain_idx, ch_i2,
+ m2->gain_idx);
+ omeas->temperature =
+ (u8) il4965_interpolate_value(channel, ch_i1,
+ m1->temperature,
+ ch_i2,
+ m2->temperature);
+ omeas->pa_det =
+ (s8) il4965_interpolate_value(channel, ch_i1,
+ m1->pa_det, ch_i2,
+ m2->pa_det);
+
+ D_TXPOWER(
+ "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
+ m1->actual_pow, m2->actual_pow, omeas->actual_pow);
+ D_TXPOWER(
+ "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
+ m1->gain_idx, m2->gain_idx, omeas->gain_idx);
+ D_TXPOWER(
+ "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
+ m1->pa_det, m2->pa_det, omeas->pa_det);
+ D_TXPOWER(
+ "chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
+ m1->temperature, m2->temperature,
+ omeas->temperature);
+ }
+ }
+
+ return 0;
+}
+
+/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
+ * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
+static s32 back_off_table[] = {
+ 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
+ 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
+ 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
+ 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
+ 10 /* CCK */
+};
+
+/* Thermal compensation values for txpower for various frequency ranges ...
+ * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
+static struct il4965_txpower_comp_entry {
+ s32 degrees_per_05db_a;
+ s32 degrees_per_05db_a_denom;
+} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
+ {9, 2}, /* group 0 5.2, ch 34-43 */
+ {4, 1}, /* group 1 5.2, ch 44-70 */
+ {4, 1}, /* group 2 5.2, ch 71-124 */
+ {4, 1}, /* group 3 5.2, ch 125-200 */
+ {3, 1} /* group 4 2.4, ch all */
+};
+
+static s32 get_min_power_idx(s32 rate_power_idx, u32 band)
+{
+ if (!band) {
+ if ((rate_power_idx & 7) <= 4)
+ return MIN_TX_GAIN_IDX_52GHZ_EXT;
+ }
+ return MIN_TX_GAIN_IDX;
+}
+
+struct gain_entry {
+ u8 dsp;
+ u8 radio;
+};
+
+static const struct gain_entry gain_table[2][108] = {
+ /* 5.2GHz power gain idx table */
+ {
+ {123, 0x3F}, /* highest txpower */
+ {117, 0x3F},
+ {110, 0x3F},
+ {104, 0x3F},
+ {98, 0x3F},
+ {110, 0x3E},
+ {104, 0x3E},
+ {98, 0x3E},
+ {110, 0x3D},
+ {104, 0x3D},
+ {98, 0x3D},
+ {110, 0x3C},
+ {104, 0x3C},
+ {98, 0x3C},
+ {110, 0x3B},
+ {104, 0x3B},
+ {98, 0x3B},
+ {110, 0x3A},
+ {104, 0x3A},
+ {98, 0x3A},
+ {110, 0x39},
+ {104, 0x39},
+ {98, 0x39},
+ {110, 0x38},
+ {104, 0x38},
+ {98, 0x38},
+ {110, 0x37},
+ {104, 0x37},
+ {98, 0x37},
+ {110, 0x36},
+ {104, 0x36},
+ {98, 0x36},
+ {110, 0x35},
+ {104, 0x35},
+ {98, 0x35},
+ {110, 0x34},
+ {104, 0x34},
+ {98, 0x34},
+ {110, 0x33},
+ {104, 0x33},
+ {98, 0x33},
+ {110, 0x32},
+ {104, 0x32},
+ {98, 0x32},
+ {110, 0x31},
+ {104, 0x31},
+ {98, 0x31},
+ {110, 0x30},
+ {104, 0x30},
+ {98, 0x30},
+ {110, 0x25},
+ {104, 0x25},
+ {98, 0x25},
+ {110, 0x24},
+ {104, 0x24},
+ {98, 0x24},
+ {110, 0x23},
+ {104, 0x23},
+ {98, 0x23},
+ {110, 0x22},
+ {104, 0x18},
+ {98, 0x18},
+ {110, 0x17},
+ {104, 0x17},
+ {98, 0x17},
+ {110, 0x16},
+ {104, 0x16},
+ {98, 0x16},
+ {110, 0x15},
+ {104, 0x15},
+ {98, 0x15},
+ {110, 0x14},
+ {104, 0x14},
+ {98, 0x14},
+ {110, 0x13},
+ {104, 0x13},
+ {98, 0x13},
+ {110, 0x12},
+ {104, 0x08},
+ {98, 0x08},
+ {110, 0x07},
+ {104, 0x07},
+ {98, 0x07},
+ {110, 0x06},
+ {104, 0x06},
+ {98, 0x06},
+ {110, 0x05},
+ {104, 0x05},
+ {98, 0x05},
+ {110, 0x04},
+ {104, 0x04},
+ {98, 0x04},
+ {110, 0x03},
+ {104, 0x03},
+ {98, 0x03},
+ {110, 0x02},
+ {104, 0x02},
+ {98, 0x02},
+ {110, 0x01},
+ {104, 0x01},
+ {98, 0x01},
+ {110, 0x00},
+ {104, 0x00},
+ {98, 0x00},
+ {93, 0x00},
+ {88, 0x00},
+ {83, 0x00},
+ {78, 0x00},
+ },
+ /* 2.4GHz power gain idx table */
+ {
+ {110, 0x3f}, /* highest txpower */
+ {104, 0x3f},
+ {98, 0x3f},
+ {110, 0x3e},
+ {104, 0x3e},
+ {98, 0x3e},
+ {110, 0x3d},
+ {104, 0x3d},
+ {98, 0x3d},
+ {110, 0x3c},
+ {104, 0x3c},
+ {98, 0x3c},
+ {110, 0x3b},
+ {104, 0x3b},
+ {98, 0x3b},
+ {110, 0x3a},
+ {104, 0x3a},
+ {98, 0x3a},
+ {110, 0x39},
+ {104, 0x39},
+ {98, 0x39},
+ {110, 0x38},
+ {104, 0x38},
+ {98, 0x38},
+ {110, 0x37},
+ {104, 0x37},
+ {98, 0x37},
+ {110, 0x36},
+ {104, 0x36},
+ {98, 0x36},
+ {110, 0x35},
+ {104, 0x35},
+ {98, 0x35},
+ {110, 0x34},
+ {104, 0x34},
+ {98, 0x34},
+ {110, 0x33},
+ {104, 0x33},
+ {98, 0x33},
+ {110, 0x32},
+ {104, 0x32},
+ {98, 0x32},
+ {110, 0x31},
+ {104, 0x31},
+ {98, 0x31},
+ {110, 0x30},
+ {104, 0x30},
+ {98, 0x30},
+ {110, 0x6},
+ {104, 0x6},
+ {98, 0x6},
+ {110, 0x5},
+ {104, 0x5},
+ {98, 0x5},
+ {110, 0x4},
+ {104, 0x4},
+ {98, 0x4},
+ {110, 0x3},
+ {104, 0x3},
+ {98, 0x3},
+ {110, 0x2},
+ {104, 0x2},
+ {98, 0x2},
+ {110, 0x1},
+ {104, 0x1},
+ {98, 0x1},
+ {110, 0x0},
+ {104, 0x0},
+ {98, 0x0},
+ {97, 0},
+ {96, 0},
+ {95, 0},
+ {94, 0},
+ {93, 0},
+ {92, 0},
+ {91, 0},
+ {90, 0},
+ {89, 0},
+ {88, 0},
+ {87, 0},
+ {86, 0},
+ {85, 0},
+ {84, 0},
+ {83, 0},
+ {82, 0},
+ {81, 0},
+ {80, 0},
+ {79, 0},
+ {78, 0},
+ {77, 0},
+ {76, 0},
+ {75, 0},
+ {74, 0},
+ {73, 0},
+ {72, 0},
+ {71, 0},
+ {70, 0},
+ {69, 0},
+ {68, 0},
+ {67, 0},
+ {66, 0},
+ {65, 0},
+ {64, 0},
+ {63, 0},
+ {62, 0},
+ {61, 0},
+ {60, 0},
+ {59, 0},
+ }
+};
+
+static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
+ u8 is_ht40, u8 ctrl_chan_high,
+ struct il4965_tx_power_db *tx_power_tbl)
+{
+ u8 saturation_power;
+ s32 target_power;
+ s32 user_target_power;
+ s32 power_limit;
+ s32 current_temp;
+ s32 reg_limit;
+ s32 current_regulatory;
+ s32 txatten_grp = CALIB_CH_GROUP_MAX;
+ int i;
+ int c;
+ const struct il_channel_info *ch_info = NULL;
+ struct il_eeprom_calib_ch_info ch_eeprom_info;
+ const struct il_eeprom_calib_measure *measurement;
+ s16 voltage;
+ s32 init_voltage;
+ s32 voltage_compensation;
+ s32 degrees_per_05db_num;
+ s32 degrees_per_05db_denom;
+ s32 factory_temp;
+ s32 temperature_comp[2];
+ s32 factory_gain_idx[2];
+ s32 factory_actual_pwr[2];
+ s32 power_idx;
+
+ /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
+ * are used for idxing into txpower table) */
+ user_target_power = 2 * il->tx_power_user_lmt;
+
+ /* Get current (RXON) channel, band, width */
+ D_TXPOWER("chan %d band %d is_ht40 %d\n", channel, band,
+ is_ht40);
+
+ ch_info = il_get_channel_info(il, il->band, channel);
+
+ if (!il_is_channel_valid(ch_info))
+ return -EINVAL;
+
+ /* get txatten group, used to select 1) thermal txpower adjustment
+ * and 2) mimo txpower balance between Tx chains. */
+ txatten_grp = il4965_get_tx_atten_grp(channel);
+ if (txatten_grp < 0) {
+ IL_ERR("Can't find txatten group for channel %d.\n",
+ channel);
+ return txatten_grp;
+ }
+
+ D_TXPOWER("channel %d belongs to txatten group %d\n",
+ channel, txatten_grp);
+
+ if (is_ht40) {
+ if (ctrl_chan_high)
+ channel -= 2;
+ else
+ channel += 2;
+ }
+
+ /* hardware txpower limits ...
+ * saturation (clipping distortion) txpowers are in half-dBm */
+ if (band)
+ saturation_power = il->calib_info->saturation_power24;
+ else
+ saturation_power = il->calib_info->saturation_power52;
+
+ if (saturation_power < IL_TX_POWER_SATURATION_MIN ||
+ saturation_power > IL_TX_POWER_SATURATION_MAX) {
+ if (band)
+ saturation_power = IL_TX_POWER_DEFAULT_SATURATION_24;
+ else
+ saturation_power = IL_TX_POWER_DEFAULT_SATURATION_52;
+ }
+
+ /* regulatory txpower limits ... reg_limit values are in half-dBm,
+ * max_power_avg values are in dBm, convert * 2 */
+ if (is_ht40)
+ reg_limit = ch_info->ht40_max_power_avg * 2;
+ else
+ reg_limit = ch_info->max_power_avg * 2;
+
+ if ((reg_limit < IL_TX_POWER_REGULATORY_MIN) ||
+ (reg_limit > IL_TX_POWER_REGULATORY_MAX)) {
+ if (band)
+ reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_24;
+ else
+ reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_52;
+ }
+
+ /* Interpolate txpower calibration values for this channel,
+ * based on factory calibration tests on spaced channels. */
+ il4965_interpolate_chan(il, channel, &ch_eeprom_info);
+
+ /* calculate tx gain adjustment based on power supply voltage */
+ voltage = le16_to_cpu(il->calib_info->voltage);
+ init_voltage = (s32)le32_to_cpu(il->card_alive_init.voltage);
+ voltage_compensation =
+ il4965_get_voltage_compensation(voltage, init_voltage);
+
+ D_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
+ init_voltage,
+ voltage, voltage_compensation);
+
+ /* get current temperature (Celsius) */
+ current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN);
+ current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX);
+ current_temp = KELVIN_TO_CELSIUS(current_temp);
+
+ /* select thermal txpower adjustment params, based on channel group
+ * (same frequency group used for mimo txatten adjustment) */
+ degrees_per_05db_num =
+ tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
+ degrees_per_05db_denom =
+ tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
+
+ /* get per-chain txpower values from factory measurements */
+ for (c = 0; c < 2; c++) {
+ measurement = &ch_eeprom_info.measurements[c][1];
+
+ /* txgain adjustment (in half-dB steps) based on difference
+ * between factory and current temperature */
+ factory_temp = measurement->temperature;
+ il4965_math_div_round((current_temp - factory_temp) *
+ degrees_per_05db_denom,
+ degrees_per_05db_num,
+ &temperature_comp[c]);
+
+ factory_gain_idx[c] = measurement->gain_idx;
+ factory_actual_pwr[c] = measurement->actual_pow;
+
+ D_TXPOWER("chain = %d\n", c);
+ D_TXPOWER("fctry tmp %d, "
+ "curr tmp %d, comp %d steps\n",
+ factory_temp, current_temp,
+ temperature_comp[c]);
+
+ D_TXPOWER("fctry idx %d, fctry pwr %d\n",
+ factory_gain_idx[c],
+ factory_actual_pwr[c]);
+ }
+
+ /* for each of 33 bit-rates (including 1 for CCK) */
+ for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) {
+ u8 is_mimo_rate;
+ union il4965_tx_power_dual_stream tx_power;
+
+ /* for mimo, reduce each chain's txpower by half
+ * (3dB, 6 steps), so total output power is regulatory
+ * compliant. */
+ if (i & 0x8) {
+ current_regulatory = reg_limit -
+ IL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
+ is_mimo_rate = 1;
+ } else {
+ current_regulatory = reg_limit;
+ is_mimo_rate = 0;
+ }
+
+ /* find txpower limit, either hardware or regulatory */
+ power_limit = saturation_power - back_off_table[i];
+ if (power_limit > current_regulatory)
+ power_limit = current_regulatory;
+
+ /* reduce user's txpower request if necessary
+ * for this rate on this channel */
+ target_power = user_target_power;
+ if (target_power > power_limit)
+ target_power = power_limit;
+
+ D_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
+ i, saturation_power - back_off_table[i],
+ current_regulatory, user_target_power,
+ target_power);
+
+ /* for each of 2 Tx chains (radio transmitters) */
+ for (c = 0; c < 2; c++) {
+ s32 atten_value;
+
+ if (is_mimo_rate)
+ atten_value =
+ (s32)le32_to_cpu(il->card_alive_init.
+ tx_atten[txatten_grp][c]);
+ else
+ atten_value = 0;
+
+ /* calculate idx; higher idx means lower txpower */
+ power_idx = (u8) (factory_gain_idx[c] -
+ (target_power -
+ factory_actual_pwr[c]) -
+ temperature_comp[c] -
+ voltage_compensation +
+ atten_value);
+
+/* D_TXPOWER("calculated txpower idx %d\n",
+ power_idx); */
+
+ if (power_idx < get_min_power_idx(i, band))
+ power_idx = get_min_power_idx(i, band);
+
+ /* adjust 5 GHz idx to support negative idxes */
+ if (!band)
+ power_idx += 9;
+
+ /* CCK, rate 32, reduce txpower for CCK */
+ if (i == POWER_TBL_CCK_ENTRY)
+ power_idx +=
+ IL_TX_POWER_CCK_COMPENSATION_C_STEP;
+
+ /* stay within the table! */
+ if (power_idx > 107) {
+ IL_WARN("txpower idx %d > 107\n",
+ power_idx);
+ power_idx = 107;
+ }
+ if (power_idx < 0) {
+ IL_WARN("txpower idx %d < 0\n",
+ power_idx);
+ power_idx = 0;
+ }
+
+ /* fill txpower command for this rate/chain */
+ tx_power.s.radio_tx_gain[c] =
+ gain_table[band][power_idx].radio;
+ tx_power.s.dsp_predis_atten[c] =
+ gain_table[band][power_idx].dsp;
+
+ D_TXPOWER("chain %d mimo %d idx %d "
+ "gain 0x%02x dsp %d\n",
+ c, atten_value, power_idx,
+ tx_power.s.radio_tx_gain[c],
+ tx_power.s.dsp_predis_atten[c]);
+ } /* for each chain */
+
+ tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
+
+ } /* for each rate */
+
+ return 0;
+}
+
+/**
+ * il4965_send_tx_power - Configure the TXPOWER level user limit
+ *
+ * Uses the active RXON for channel, band, and characteristics (ht40, high)
+ * The power limit is taken from il->tx_power_user_lmt.
+ */
+static int il4965_send_tx_power(struct il_priv *il)
+{
+ struct il4965_txpowertable_cmd cmd = { 0 };
+ int ret;
+ u8 band = 0;
+ bool is_ht40 = false;
+ u8 ctrl_chan_high = 0;
+ struct il_rxon_context *ctx = &il->ctx;
+
+ if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
+ "TX Power requested while scanning!\n"))
+ return -EAGAIN;
+
+ band = il->band == IEEE80211_BAND_2GHZ;
+
+ is_ht40 = iw4965_is_ht40_channel(ctx->active.flags);
+
+ if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
+ ctrl_chan_high = 1;
+
+ cmd.band = band;
+ cmd.channel = ctx->active.channel;
+
+ ret = il4965_fill_txpower_tbl(il, band,
+ le16_to_cpu(ctx->active.channel),
+ is_ht40, ctrl_chan_high, &cmd.tx_power);
+ if (ret)
+ goto out;
+
+ ret = il_send_cmd_pdu(il,
+ REPLY_TX_PWR_TBL_CMD, sizeof(cmd), &cmd);
+
+out:
+ return ret;
+}
+
+static int il4965_send_rxon_assoc(struct il_priv *il,
+ struct il_rxon_context *ctx)
+{
+ int ret = 0;
+ struct il4965_rxon_assoc_cmd rxon_assoc;
+ const struct il_rxon_cmd *rxon1 = &ctx->staging;
+ const struct il_rxon_cmd *rxon2 = &ctx->active;
+
+ if (rxon1->flags == rxon2->flags &&
+ rxon1->filter_flags == rxon2->filter_flags &&
+ rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
+ rxon1->ofdm_ht_single_stream_basic_rates ==
+ rxon2->ofdm_ht_single_stream_basic_rates &&
+ rxon1->ofdm_ht_dual_stream_basic_rates ==
+ rxon2->ofdm_ht_dual_stream_basic_rates &&
+ rxon1->rx_chain == rxon2->rx_chain &&
+ rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
+ D_INFO("Using current RXON_ASSOC. Not resending.\n");
+ return 0;
+ }
+
+ rxon_assoc.flags = ctx->staging.flags;
+ rxon_assoc.filter_flags = ctx->staging.filter_flags;
+ rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
+ rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
+ rxon_assoc.reserved = 0;
+ rxon_assoc.ofdm_ht_single_stream_basic_rates =
+ ctx->staging.ofdm_ht_single_stream_basic_rates;
+ rxon_assoc.ofdm_ht_dual_stream_basic_rates =
+ ctx->staging.ofdm_ht_dual_stream_basic_rates;
+ rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
+
+ ret = il_send_cmd_pdu_async(il, REPLY_RXON_ASSOC,
+ sizeof(rxon_assoc), &rxon_assoc, NULL);
+
+ return ret;
+}
+
+static int il4965_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx)
+{
+ /* cast away the const for active_rxon in this function */
+ struct il_rxon_cmd *active_rxon = (void *)&ctx->active;
+ int ret;
+ bool new_assoc =
+ !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
+
+ if (!il_is_alive(il))
+ return -EBUSY;
+
+ if (!ctx->is_active)
+ return 0;
+
+ /* always get timestamp with Rx frame */
+ ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
+
+ ret = il_check_rxon_cmd(il, ctx);
+ if (ret) {
+ IL_ERR("Invalid RXON configuration. Not committing.\n");
+ return -EINVAL;
+ }
+
+ /*
+ * receive commit_rxon request
+ * abort any previous channel switch if still in process
+ */
+ if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status) &&
+ il->switch_channel != ctx->staging.channel) {
+ D_11H("abort channel switch on %d\n",
+ le16_to_cpu(il->switch_channel));
+ il_chswitch_done(il, false);
+ }
+
+ /* If we don't need to send a full RXON, we can use
+ * il_rxon_assoc_cmd which is used to reconfigure filter
+ * and other flags for the current radio configuration. */
+ if (!il_full_rxon_required(il, ctx)) {
+ ret = il_send_rxon_assoc(il, ctx);
+ if (ret) {
+ IL_ERR("Error setting RXON_ASSOC (%d)\n", ret);
+ return ret;
+ }
+
+ memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+ il_print_rx_config_cmd(il, ctx);
+ /*
+ * We do not commit tx power settings while channel changing,
+ * do it now if tx power changed.
+ */
+ il_set_tx_power(il, il->tx_power_next, false);
+ return 0;
+ }
+
+ /* If we are currently associated and the new config requires
+ * an RXON_ASSOC and the new config wants the associated mask enabled,
+ * we must clear the associated from the active configuration
+ * before we apply the new config */
+ if (il_is_associated_ctx(ctx) && new_assoc) {
+ D_INFO("Toggling associated bit on current RXON\n");
+ active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+
+ ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
+ sizeof(struct il_rxon_cmd),
+ active_rxon);
+
+ /* If the mask clearing failed then we set
+ * active_rxon back to what it was previously */
+ if (ret) {
+ active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
+ IL_ERR("Error clearing ASSOC_MSK (%d)\n", ret);
+ return ret;
+ }
+ il_clear_ucode_stations(il, ctx);
+ il_restore_stations(il, ctx);
+ ret = il4965_restore_default_wep_keys(il, ctx);
+ if (ret) {
+ IL_ERR("Failed to restore WEP keys (%d)\n", ret);
+ return ret;
+ }
+ }
+
+ D_INFO("Sending RXON\n"
+ "* with%s RXON_FILTER_ASSOC_MSK\n"
+ "* channel = %d\n"
+ "* bssid = %pM\n",
+ (new_assoc ? "" : "out"),
+ le16_to_cpu(ctx->staging.channel),
+ ctx->staging.bssid_addr);
+
+ il_set_rxon_hwcrypto(il, ctx,
+ !il->cfg->mod_params->sw_crypto);
+
+ /* Apply the new configuration
+ * RXON unassoc clears the station table in uCode so restoration of
+ * stations is needed after it (the RXON command) completes
+ */
+ if (!new_assoc) {
+ ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
+ sizeof(struct il_rxon_cmd), &ctx->staging);
+ if (ret) {
+ IL_ERR("Error setting new RXON (%d)\n", ret);
+ return ret;
+ }
+ D_INFO("Return from !new_assoc RXON.\n");
+ memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+ il_clear_ucode_stations(il, ctx);
+ il_restore_stations(il, ctx);
+ ret = il4965_restore_default_wep_keys(il, ctx);
+ if (ret) {
+ IL_ERR("Failed to restore WEP keys (%d)\n", ret);
+ return ret;
+ }
+ }
+ if (new_assoc) {
+ il->start_calib = 0;
+ /* Apply the new configuration
+ * RXON assoc doesn't clear the station table in uCode,
+ */
+ ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
+ sizeof(struct il_rxon_cmd), &ctx->staging);
+ if (ret) {
+ IL_ERR("Error setting new RXON (%d)\n", ret);
+ return ret;
+ }
+ memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
+ }
+ il_print_rx_config_cmd(il, ctx);
+
+ il4965_init_sensitivity(il);
+
+ /* If we issue a new RXON command which required a tune then we must
+ * send a new TXPOWER command or we won't be able to Tx any frames */
+ ret = il_set_tx_power(il, il->tx_power_next, true);
+ if (ret) {
+ IL_ERR("Error sending TX power (%d)\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static int il4965_hw_channel_switch(struct il_priv *il,
+ struct ieee80211_channel_switch *ch_switch)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ int rc;
+ u8 band = 0;
+ bool is_ht40 = false;
+ u8 ctrl_chan_high = 0;
+ struct il4965_channel_switch_cmd cmd;
+ const struct il_channel_info *ch_info;
+ u32 switch_time_in_usec, ucode_switch_time;
+ u16 ch;
+ u32 tsf_low;
+ u8 switch_count;
+ u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
+ struct ieee80211_vif *vif = ctx->vif;
+ band = il->band == IEEE80211_BAND_2GHZ;
+
+ is_ht40 = iw4965_is_ht40_channel(ctx->staging.flags);
+
+ if (is_ht40 &&
+ (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
+ ctrl_chan_high = 1;
+
+ cmd.band = band;
+ cmd.expect_beacon = 0;
+ ch = ch_switch->channel->hw_value;
+ cmd.channel = cpu_to_le16(ch);
+ cmd.rxon_flags = ctx->staging.flags;
+ cmd.rxon_filter_flags = ctx->staging.filter_flags;
+ switch_count = ch_switch->count;
+ tsf_low = ch_switch->timestamp & 0x0ffffffff;
+ /*
+ * calculate the ucode channel switch time
+ * adding TSF as one of the factor for when to switch
+ */
+ if (il->ucode_beacon_time > tsf_low && beacon_interval) {
+ if (switch_count > ((il->ucode_beacon_time - tsf_low) /
+ beacon_interval)) {
+ switch_count -= (il->ucode_beacon_time -
+ tsf_low) / beacon_interval;
+ } else
+ switch_count = 0;
+ }
+ if (switch_count <= 1)
+ cmd.switch_time = cpu_to_le32(il->ucode_beacon_time);
+ else {
+ switch_time_in_usec =
+ vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
+ ucode_switch_time = il_usecs_to_beacons(il,
+ switch_time_in_usec,
+ beacon_interval);
+ cmd.switch_time = il_add_beacon_time(il,
+ il->ucode_beacon_time,
+ ucode_switch_time,
+ beacon_interval);
+ }
+ D_11H("uCode time for the switch is 0x%x\n",
+ cmd.switch_time);
+ ch_info = il_get_channel_info(il, il->band, ch);
+ if (ch_info)
+ cmd.expect_beacon = il_is_channel_radar(ch_info);
+ else {
+ IL_ERR("invalid channel switch from %u to %u\n",
+ ctx->active.channel, ch);
+ return -EFAULT;
+ }
+
+ rc = il4965_fill_txpower_tbl(il, band, ch, is_ht40,
+ ctrl_chan_high, &cmd.tx_power);
+ if (rc) {
+ D_11H("error:%d fill txpower_tbl\n", rc);
+ return rc;
+ }
+
+ return il_send_cmd_pdu(il,
+ REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
+}
+
+/**
+ * il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
+ */
+static void il4965_txq_update_byte_cnt_tbl(struct il_priv *il,
+ struct il_tx_queue *txq,
+ u16 byte_cnt)
+{
+ struct il4965_scd_bc_tbl *scd_bc_tbl = il->scd_bc_tbls.addr;
+ int txq_id = txq->q.id;
+ int write_ptr = txq->q.write_ptr;
+ int len = byte_cnt + IL_TX_CRC_SIZE + IL_TX_DELIMITER_SIZE;
+ __le16 bc_ent;
+
+ WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
+
+ bc_ent = cpu_to_le16(len & 0xFFF);
+ /* Set up byte count within first 256 entries */
+ scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
+
+ /* If within first 64 entries, duplicate at end */
+ if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
+ scd_bc_tbl[txq_id].
+ tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
+}
+
+/**
+ * il4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
+ * @stats: Provides the temperature reading from the uCode
+ *
+ * A return of <0 indicates bogus data in the stats
+ */
+static int il4965_hw_get_temperature(struct il_priv *il)
+{
+ s32 temperature;
+ s32 vt;
+ s32 R1, R2, R3;
+ u32 R4;
+
+ if (test_bit(STATUS_TEMPERATURE, &il->status) &&
+ (il->_4965.stats.flag &
+ STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
+ D_TEMP("Running HT40 temperature calibration\n");
+ R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[1]);
+ R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[1]);
+ R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[1]);
+ R4 = le32_to_cpu(il->card_alive_init.therm_r4[1]);
+ } else {
+ D_TEMP("Running temperature calibration\n");
+ R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[0]);
+ R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[0]);
+ R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[0]);
+ R4 = le32_to_cpu(il->card_alive_init.therm_r4[0]);
+ }
+
+ /*
+ * Temperature is only 23 bits, so sign extend out to 32.
+ *
+ * NOTE If we haven't received a stats notification yet
+ * with an updated temperature, use R4 provided to us in the
+ * "initialize" ALIVE response.
+ */
+ if (!test_bit(STATUS_TEMPERATURE, &il->status))
+ vt = sign_extend32(R4, 23);
+ else
+ vt = sign_extend32(le32_to_cpu(il->_4965.stats.
+ general.common.temperature), 23);
+
+ D_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
+
+ if (R3 == R1) {
+ IL_ERR("Calibration conflict R1 == R3\n");
+ return -1;
+ }
+
+ /* Calculate temperature in degrees Kelvin, adjust by 97%.
+ * Add offset to center the adjustment around 0 degrees Centigrade. */
+ temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
+ temperature /= (R3 - R1);
+ temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
+
+ D_TEMP("Calibrated temperature: %dK, %dC\n",
+ temperature, KELVIN_TO_CELSIUS(temperature));
+
+ return temperature;
+}
+
+/* Adjust Txpower only if temperature variance is greater than threshold. */
+#define IL_TEMPERATURE_THRESHOLD 3
+
+/**
+ * il4965_is_temp_calib_needed - determines if new calibration is needed
+ *
+ * If the temperature changed has changed sufficiently, then a recalibration
+ * is needed.
+ *
+ * Assumes caller will replace il->last_temperature once calibration
+ * executed.
+ */
+static int il4965_is_temp_calib_needed(struct il_priv *il)
+{
+ int temp_diff;
+
+ if (!test_bit(STATUS_STATISTICS, &il->status)) {
+ D_TEMP("Temperature not updated -- no stats.\n");
+ return 0;
+ }
+
+ temp_diff = il->temperature - il->last_temperature;
+
+ /* get absolute value */
+ if (temp_diff < 0) {
+ D_POWER("Getting cooler, delta %d\n", temp_diff);
+ temp_diff = -temp_diff;
+ } else if (temp_diff == 0)
+ D_POWER("Temperature unchanged\n");
+ else
+ D_POWER("Getting warmer, delta %d\n", temp_diff);
+
+ if (temp_diff < IL_TEMPERATURE_THRESHOLD) {
+ D_POWER(" => thermal txpower calib not needed\n");
+ return 0;
+ }
+
+ D_POWER(" => thermal txpower calib needed\n");
+
+ return 1;
+}
+
+static void il4965_temperature_calib(struct il_priv *il)
+{
+ s32 temp;
+
+ temp = il4965_hw_get_temperature(il);
+ if (IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
+ return;
+
+ if (il->temperature != temp) {
+ if (il->temperature)
+ D_TEMP("Temperature changed "
+ "from %dC to %dC\n",
+ KELVIN_TO_CELSIUS(il->temperature),
+ KELVIN_TO_CELSIUS(temp));
+ else
+ D_TEMP("Temperature "
+ "initialized to %dC\n",
+ KELVIN_TO_CELSIUS(temp));
+ }
+
+ il->temperature = temp;
+ set_bit(STATUS_TEMPERATURE, &il->status);
+
+ if (!il->disable_tx_power_cal &&
+ unlikely(!test_bit(STATUS_SCANNING, &il->status)) &&
+ il4965_is_temp_calib_needed(il))
+ queue_work(il->workqueue, &il->txpower_work);
+}
+
+static u16 il4965_get_hcmd_size(u8 cmd_id, u16 len)
+{
+ switch (cmd_id) {
+ case REPLY_RXON:
+ return (u16) sizeof(struct il4965_rxon_cmd);
+ default:
+ return len;
+ }
+}
+
+static u16 il4965_build_addsta_hcmd(const struct il_addsta_cmd *cmd,
+ u8 *data)
+{
+ struct il4965_addsta_cmd *addsta = (struct il4965_addsta_cmd *)data;
+ addsta->mode = cmd->mode;
+ memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
+ memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
+ addsta->station_flags = cmd->station_flags;
+ addsta->station_flags_msk = cmd->station_flags_msk;
+ addsta->tid_disable_tx = cmd->tid_disable_tx;
+ addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
+ addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
+ addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
+ addsta->sleep_tx_count = cmd->sleep_tx_count;
+ addsta->reserved1 = cpu_to_le16(0);
+ addsta->reserved2 = cpu_to_le16(0);
+
+ return (u16)sizeof(struct il4965_addsta_cmd);
+}
+
+static inline u32 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
+{
+ return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
+}
+
+/**
+ * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
+ */
+static int il4965_tx_status_reply_tx(struct il_priv *il,
+ struct il_ht_agg *agg,
+ struct il4965_tx_resp *tx_resp,
+ int txq_id, u16 start_idx)
+{
+ u16 status;
+ struct agg_tx_status *frame_status = tx_resp->u.agg_status;
+ struct ieee80211_tx_info *info = NULL;
+ struct ieee80211_hdr *hdr = NULL;
+ u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
+ int i, sh, idx;
+ u16 seq;
+ if (agg->wait_for_ba)
+ D_TX_REPLY("got tx response w/o block-ack\n");
+
+ agg->frame_count = tx_resp->frame_count;
+ agg->start_idx = start_idx;
+ agg->rate_n_flags = rate_n_flags;
+ agg->bitmap = 0;
+
+ /* num frames attempted by Tx command */
+ if (agg->frame_count == 1) {
+ /* Only one frame was attempted; no block-ack will arrive */
+ status = le16_to_cpu(frame_status[0].status);
+ idx = start_idx;
+
+ D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
+ agg->frame_count, agg->start_idx, idx);
+
+ info = IEEE80211_SKB_CB(il->txq[txq_id].txb[idx].skb);
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags &= ~IEEE80211_TX_CTL_AMPDU;
+ info->flags |= il4965_tx_status_to_mac80211(status);
+ il4965_hwrate_to_tx_control(il, rate_n_flags, info);
+
+ D_TX_REPLY("1 Frame 0x%x failure :%d\n",
+ status & 0xff, tx_resp->failure_frame);
+ D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
+
+ agg->wait_for_ba = 0;
+ } else {
+ /* Two or more frames were attempted; expect block-ack */
+ u64 bitmap = 0;
+ int start = agg->start_idx;
+
+ /* Construct bit-map of pending frames within Tx win */
+ for (i = 0; i < agg->frame_count; i++) {
+ u16 sc;
+ status = le16_to_cpu(frame_status[i].status);
+ seq = le16_to_cpu(frame_status[i].sequence);
+ idx = SEQ_TO_IDX(seq);
+ txq_id = SEQ_TO_QUEUE(seq);
+
+ if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
+ AGG_TX_STATE_ABORT_MSK))
+ continue;
+
+ D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
+ agg->frame_count, txq_id, idx);
+
+ hdr = il_tx_queue_get_hdr(il, txq_id, idx);
+ if (!hdr) {
+ IL_ERR(
+ "BUG_ON idx doesn't point to valid skb"
+ " idx=%d, txq_id=%d\n", idx, txq_id);
+ return -1;
+ }
+
+ sc = le16_to_cpu(hdr->seq_ctrl);
+ if (idx != (SEQ_TO_SN(sc) & 0xff)) {
+ IL_ERR(
+ "BUG_ON idx doesn't match seq control"
+ " idx=%d, seq_idx=%d, seq=%d\n",
+ idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
+ return -1;
+ }
+
+ D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
+ i, idx, SEQ_TO_SN(sc));
+
+ sh = idx - start;
+ if (sh > 64) {
+ sh = (start - idx) + 0xff;
+ bitmap = bitmap << sh;
+ sh = 0;
+ start = idx;
+ } else if (sh < -64)
+ sh = 0xff - (start - idx);
+ else if (sh < 0) {
+ sh = start - idx;
+ start = idx;
+ bitmap = bitmap << sh;
+ sh = 0;
+ }
+ bitmap |= 1ULL << sh;
+ D_TX_REPLY("start=%d bitmap=0x%llx\n",
+ start, (unsigned long long)bitmap);
+ }
+
+ agg->bitmap = bitmap;
+ agg->start_idx = start;
+ D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
+ agg->frame_count, agg->start_idx,
+ (unsigned long long)agg->bitmap);
+
+ if (bitmap)
+ agg->wait_for_ba = 1;
+ }
+ return 0;
+}
+
+static u8 il4965_find_station(struct il_priv *il, const u8 *addr)
+{
+ int i;
+ int start = 0;
+ int ret = IL_INVALID_STATION;
+ unsigned long flags;
+
+ if ((il->iw_mode == NL80211_IFTYPE_ADHOC))
+ start = IL_STA_ID;
+
+ if (is_broadcast_ether_addr(addr))
+ return il->ctx.bcast_sta_id;
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ for (i = start; i < il->hw_params.max_stations; i++)
+ if (il->stations[i].used &&
+ (!compare_ether_addr(il->stations[i].sta.sta.addr,
+ addr))) {
+ ret = i;
+ goto out;
+ }
+
+ D_ASSOC("can not find STA %pM total %d\n",
+ addr, il->num_stations);
+
+ out:
+ /*
+ * It may be possible that more commands interacting with stations
+ * arrive before we completed processing the adding of
+ * station
+ */
+ if (ret != IL_INVALID_STATION &&
+ (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
+ ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) &&
+ (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) {
+ IL_ERR("Requested station info for sta %d before ready.\n",
+ ret);
+ ret = IL_INVALID_STATION;
+ }
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+ return ret;
+}
+
+static int il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
+{
+ if (il->iw_mode == NL80211_IFTYPE_STATION) {
+ return IL_AP_ID;
+ } else {
+ u8 *da = ieee80211_get_DA(hdr);
+ return il4965_find_station(il, da);
+ }
+}
+
+/**
+ * il4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
+ */
+static void il4965_rx_reply_tx(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ u16 sequence = le16_to_cpu(pkt->hdr.sequence);
+ int txq_id = SEQ_TO_QUEUE(sequence);
+ int idx = SEQ_TO_IDX(sequence);
+ struct il_tx_queue *txq = &il->txq[txq_id];
+ struct ieee80211_hdr *hdr;
+ struct ieee80211_tx_info *info;
+ struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
+ u32 status = le32_to_cpu(tx_resp->u.status);
+ int uninitialized_var(tid);
+ int sta_id;
+ int freed;
+ u8 *qc = NULL;
+ unsigned long flags;
+
+ if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
+ IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
+ "is out of range [0-%d] %d %d\n", txq_id,
+ idx, txq->q.n_bd, txq->q.write_ptr,
+ txq->q.read_ptr);
+ return;
+ }
+
+ txq->time_stamp = jiffies;
+ info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
+ memset(&info->status, 0, sizeof(info->status));
+
+ hdr = il_tx_queue_get_hdr(il, txq_id, idx);
+ if (ieee80211_is_data_qos(hdr->frame_control)) {
+ qc = ieee80211_get_qos_ctl(hdr);
+ tid = qc[0] & 0xf;
+ }
+
+ sta_id = il4965_get_ra_sta_id(il, hdr);
+ if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
+ IL_ERR("Station not known\n");
+ return;
+ }
+
+ spin_lock_irqsave(&il->sta_lock, flags);
+ if (txq->sched_retry) {
+ const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
+ struct il_ht_agg *agg = NULL;
+ WARN_ON(!qc);
+
+ agg = &il->stations[sta_id].tid[tid].agg;
+
+ il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
+
+ /* check if BAR is needed */
+ if ((tx_resp->frame_count == 1) && !il4965_is_tx_success(status))
+ info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
+
+ if (txq->q.read_ptr != (scd_ssn & 0xff)) {
+ idx = il_queue_dec_wrap(scd_ssn & 0xff,
+ txq->q.n_bd);
+ D_TX_REPLY("Retry scheduler reclaim scd_ssn "
+ "%d idx %d\n", scd_ssn , idx);
+ freed = il4965_tx_queue_reclaim(il, txq_id, idx);
+ if (qc)
+ il4965_free_tfds_in_queue(il, sta_id,
+ tid, freed);
+
+ if (il->mac80211_registered &&
+ il_queue_space(&txq->q) > txq->q.low_mark &&
+ agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
+ il_wake_queue(il, txq);
+ }
+ } else {
+ info->status.rates[0].count = tx_resp->failure_frame + 1;
+ info->flags |= il4965_tx_status_to_mac80211(status);
+ il4965_hwrate_to_tx_control(il,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ info);
+
+ D_TX_REPLY("TXQ %d status %s (0x%08x) "
+ "rate_n_flags 0x%x retries %d\n",
+ txq_id,
+ il4965_get_tx_fail_reason(status), status,
+ le32_to_cpu(tx_resp->rate_n_flags),
+ tx_resp->failure_frame);
+
+ freed = il4965_tx_queue_reclaim(il, txq_id, idx);
+ if (qc && likely(sta_id != IL_INVALID_STATION))
+ il4965_free_tfds_in_queue(il, sta_id, tid, freed);
+ else if (sta_id == IL_INVALID_STATION)
+ D_TX_REPLY("Station not known\n");
+
+ if (il->mac80211_registered &&
+ il_queue_space(&txq->q) > txq->q.low_mark)
+ il_wake_queue(il, txq);
+ }
+ if (qc && likely(sta_id != IL_INVALID_STATION))
+ il4965_txq_check_empty(il, sta_id, tid, txq_id);
+
+ il4965_check_abort_status(il, tx_resp->frame_count, status);
+
+ spin_unlock_irqrestore(&il->sta_lock, flags);
+}
+
+static void il4965_rx_beacon_notif(struct il_priv *il,
+ struct il_rx_buf *rxb)
+{
+ struct il_rx_pkt *pkt = rxb_addr(rxb);
+ struct il4965_beacon_notif *beacon = (void *)pkt->u.raw;
+ u8 rate __maybe_unused =
+ il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
+
+ D_RX("beacon status %#x, retries:%d ibssmgr:%d "
+ "tsf:0x%.8x%.8x rate:%d\n",
+ le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
+ beacon->beacon_notify_hdr.failure_frame,
+ le32_to_cpu(beacon->ibss_mgr_status),
+ le32_to_cpu(beacon->high_tsf),
+ le32_to_cpu(beacon->low_tsf), rate);
+
+ il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
+}
+
+/* Set up 4965-specific Rx frame reply handlers */
+static void il4965_rx_handler_setup(struct il_priv *il)
+{
+ /* Legacy Rx frames */
+ il->rx_handlers[REPLY_RX] = il4965_rx_reply_rx;
+ /* Tx response */
+ il->rx_handlers[REPLY_TX] = il4965_rx_reply_tx;
+ il->rx_handlers[BEACON_NOTIFICATION] = il4965_rx_beacon_notif;
+}
+
+static struct il_hcmd_ops il4965_hcmd = {
+ .rxon_assoc = il4965_send_rxon_assoc,
+ .commit_rxon = il4965_commit_rxon,
+ .set_rxon_chain = il4965_set_rxon_chain,
+};
+
+static void il4965_post_scan(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+
+ /*
+ * Since setting the RXON may have been deferred while
+ * performing the scan, fire one off if needed
+ */
+ if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
+ il_commit_rxon(il, ctx);
+}
+
+static void il4965_post_associate(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ struct ieee80211_vif *vif = ctx->vif;
+ struct ieee80211_conf *conf = NULL;
+ int ret = 0;
+
+ if (!vif || !il->is_open)
+ return;
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ il_scan_cancel_timeout(il, 200);
+
+ conf = il_ieee80211_get_hw_conf(il->hw);
+
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ il_commit_rxon(il, ctx);
+
+ ret = il_send_rxon_timing(il, ctx);
+ if (ret)
+ IL_WARN("RXON timing - "
+ "Attempting to continue.\n");
+
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+
+ il_set_rxon_ht(il, &il->current_ht_config);
+
+ if (il->cfg->ops->hcmd->set_rxon_chain)
+ il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+
+ ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
+
+ D_ASSOC("assoc id %d beacon interval %d\n",
+ vif->bss_conf.aid, vif->bss_conf.beacon_int);
+
+ if (vif->bss_conf.use_short_preamble)
+ ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+ if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+ if (vif->bss_conf.use_short_slot)
+ ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
+ else
+ ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
+ }
+
+ il_commit_rxon(il, ctx);
+
+ D_ASSOC("Associated as %d to: %pM\n",
+ vif->bss_conf.aid, ctx->active.bssid_addr);
+
+ switch (vif->type) {
+ case NL80211_IFTYPE_STATION:
+ break;
+ case NL80211_IFTYPE_ADHOC:
+ il4965_send_beacon_cmd(il);
+ break;
+ default:
+ IL_ERR("%s Should not be called in %d mode\n",
+ __func__, vif->type);
+ break;
+ }
+
+ /* the chain noise calibration will enabled PM upon completion
+ * If chain noise has already been run, then we need to enable
+ * power management here */
+ if (il->chain_noise_data.state == IL_CHAIN_NOISE_DONE)
+ il_power_update_mode(il, false);
+
+ /* Enable Rx differential gain and sensitivity calibrations */
+ il4965_chain_noise_reset(il);
+ il->start_calib = 1;
+}
+
+static void il4965_config_ap(struct il_priv *il)
+{
+ struct il_rxon_context *ctx = &il->ctx;
+ struct ieee80211_vif *vif = ctx->vif;
+ int ret = 0;
+
+ lockdep_assert_held(&il->mutex);
+
+ if (test_bit(STATUS_EXIT_PENDING, &il->status))
+ return;
+
+ /* The following should be done only at AP bring up */
+ if (!il_is_associated_ctx(ctx)) {
+
+ /* RXON - unassoc (to set timing command) */
+ ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
+ il_commit_rxon(il, ctx);
+
+ /* RXON Timing */
+ ret = il_send_rxon_timing(il, ctx);
+ if (ret)
+ IL_WARN("RXON timing failed - "
+ "Attempting to continue.\n");
+
+ /* AP has all antennas */
+ il->chain_noise_data.active_chains =
+ il->hw_params.valid_rx_ant;
+ il_set_rxon_ht(il, &il->current_ht_config);
+ if (il->cfg->ops->hcmd->set_rxon_chain)
+ il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
+
+ ctx->staging.assoc_id = 0;
+
+ if (vif->bss_conf.use_short_preamble)
+ ctx->staging.flags |=
+ RXON_FLG_SHORT_PREAMBLE_MSK;
+ else
+ ctx->staging.flags &=
+ ~RXON_FLG_SHORT_PREAMBLE_MSK;
+
+ if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
+ if (vif->bss_conf.use_short_slot)
+ ctx->staging.flags |=
+ RXON_FLG_SHORT_SLOT_MSK;
+ else
+ ctx->staging.flags &=
+ ~RXON_FLG_SHORT_SLOT_MSK;
+ }
+ /* need to send beacon cmd before committing assoc RXON! */
+ il4965_send_beacon_cmd(il);
+ /* restore RXON assoc */
+ ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
+ il_commit_rxon(il, ctx);
+ }
+ il4965_send_beacon_cmd(il);
+}
+
+static struct il_hcmd_utils_ops il4965_hcmd_utils = {
+ .get_hcmd_size = il4965_get_hcmd_size,
+ .build_addsta_hcmd = il4965_build_addsta_hcmd,
+ .request_scan = il4965_request_scan,
+ .post_scan = il4965_post_scan,
+};
+
+static struct il_lib_ops il4965_lib = {
+ .set_hw_params = il4965_hw_set_hw_params,
+ .txq_update_byte_cnt_tbl = il4965_txq_update_byte_cnt_tbl,
+ .txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd,
+ .txq_free_tfd = il4965_hw_txq_free_tfd,
+ .txq_init = il4965_hw_tx_queue_init,
+ .rx_handler_setup = il4965_rx_handler_setup,
+ .is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr,
+ .init_alive_start = il4965_init_alive_start,
+ .load_ucode = il4965_load_bsm,
+ .dump_nic_error_log = il4965_dump_nic_error_log,
+ .dump_fh = il4965_dump_fh,
+ .set_channel_switch = il4965_hw_channel_switch,
+ .apm_ops = {
+ .init = il_apm_init,
+ .config = il4965_nic_config,
+ },
+ .eeprom_ops = {
+ .regulatory_bands = {
+ EEPROM_REGULATORY_BAND_1_CHANNELS,
+ EEPROM_REGULATORY_BAND_2_CHANNELS,
+ EEPROM_REGULATORY_BAND_3_CHANNELS,
+ EEPROM_REGULATORY_BAND_4_CHANNELS,
+ EEPROM_REGULATORY_BAND_5_CHANNELS,
+ EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
+ EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
+ },
+ .acquire_semaphore = il4965_eeprom_acquire_semaphore,
+ .release_semaphore = il4965_eeprom_release_semaphore,
+ },
+ .send_tx_power = il4965_send_tx_power,
+ .update_chain_flags = il4965_update_chain_flags,
+ .temp_ops = {
+ .temperature = il4965_temperature_calib,
+ },
+ .debugfs_ops = {
+ .rx_stats_read = il4965_ucode_rx_stats_read,
+ .tx_stats_read = il4965_ucode_tx_stats_read,
+ .general_stats_read = il4965_ucode_general_stats_read,
+ },
+};
+
+static const struct il_legacy_ops il4965_legacy_ops = {
+ .post_associate = il4965_post_associate,
+ .config_ap = il4965_config_ap,
+ .manage_ibss_station = il4965_manage_ibss_station,
+ .update_bcast_stations = il4965_update_bcast_stations,
+};
+
+struct ieee80211_ops il4965_hw_ops = {
+ .tx = il4965_mac_tx,
+ .start = il4965_mac_start,
+ .stop = il4965_mac_stop,
+ .add_interface = il_mac_add_interface,
+ .remove_interface = il_mac_remove_interface,
+ .change_interface = il_mac_change_interface,
+ .config = il_mac_config,
+ .configure_filter = il4965_configure_filter,
+ .set_key = il4965_mac_set_key,
+ .update_tkip_key = il4965_mac_update_tkip_key,
+ .conf_tx = il_mac_conf_tx,
+ .reset_tsf = il_mac_reset_tsf,
+ .bss_info_changed = il_mac_bss_info_changed,
+ .ampdu_action = il4965_mac_ampdu_action,
+ .hw_scan = il_mac_hw_scan,
+ .sta_add = il4965_mac_sta_add,
+ .sta_remove = il_mac_sta_remove,
+ .channel_switch = il4965_mac_channel_switch,
+ .tx_last_beacon = il_mac_tx_last_beacon,
+};
+
+static const struct il_ops il4965_ops = {
+ .lib = &il4965_lib,
+ .hcmd = &il4965_hcmd,
+ .utils = &il4965_hcmd_utils,
+ .led = &il4965_led_ops,
+ .legacy = &il4965_legacy_ops,
+ .ieee80211_ops = &il4965_hw_ops,
+};
+
+static struct il_base_params il4965_base_params = {
+ .eeprom_size = IL4965_EEPROM_IMG_SIZE,
+ .num_of_queues = IL49_NUM_QUEUES,
+ .num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
+ .pll_cfg_val = 0,
+ .set_l0s = true,
+ .use_bsm = true,
+ .led_compensation = 61,
+ .chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
+ .wd_timeout = IL_DEF_WD_TIMEOUT,
+ .temperature_kelvin = true,
+ .ucode_tracing = true,
+ .sensitivity_calib_by_driver = true,
+ .chain_noise_calib_by_driver = true,
+};
+
+struct il_cfg il4965_cfg = {
+ .name = "Intel(R) Wireless WiFi Link 4965AGN",
+ .fw_name_pre = IL4965_FW_PRE,
+ .ucode_api_max = IL4965_UCODE_API_MAX,
+ .ucode_api_min = IL4965_UCODE_API_MIN,
+ .sku = IL_SKU_A|IL_SKU_G|IL_SKU_N,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_ABC,
+ .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
+ .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
+ .ops = &il4965_ops,
+ .mod_params = &il4965_mod_params,
+ .base_params = &il4965_base_params,
+ .led_mode = IL_LED_BLINK,
+ /*
+ * Force use of chains B and C for scan RX on 5 GHz band
+ * because the device has off-channel reception on chain A.
+ */
+ .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
+};
+
+/* Module firmware */
+MODULE_FIRMWARE(IL4965_MODULE_FIRMWARE(IL4965_UCODE_API_MAX));
# 4965
obj-$(CONFIG_IWL4965) += iwl4965.o
-iwl4965-objs := iwl-4965.o iwl4965-base.o iwl-4965-rs.o iwl-4965-led.o
+iwl4965-objs := 4965.o 4965-mac.o iwl-4965-rs.o iwl-4965-led.o
iwl4965-objs += iwl-4965-ucode.o iwl-4965-tx.o
iwl4965-objs += iwl-4965-lib.o iwl-4965-rx.o iwl-4965-calib.o
iwl4965-objs += iwl-4965-sta.o iwl-4965-eeprom.o
# 3945
obj-$(CONFIG_IWL3945) += iwl3945.o
-iwl3945-objs := iwl3945-base.o iwl-3945.o iwl-3945-rs.o iwl-3945-led.o
+iwl3945-objs := 3945-mac.o 3945.o iwl-3945-rs.o iwl-3945-led.o
iwl3945-$(CONFIG_IWLEGACY_DEBUGFS) += iwl-3945-debugfs.o
ccflags-y += -D__CHECK_ENDIAN__
+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-#include <net/mac80211.h>
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-eeprom.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-led.h"
-#include "iwl-3945-led.h"
-#include "iwl-3945-debugfs.h"
-
-#define IL_DECLARE_RATE_INFO(r, ip, in, rp, rn, pp, np) \
- [RATE_##r##M_IDX] = { RATE_##r##M_PLCP, \
- RATE_##r##M_IEEE, \
- RATE_##ip##M_IDX, \
- RATE_##in##M_IDX, \
- RATE_##rp##M_IDX, \
- RATE_##rn##M_IDX, \
- RATE_##pp##M_IDX, \
- RATE_##np##M_IDX, \
- RATE_##r##M_IDX_TBL, \
- RATE_##ip##M_IDX_TBL }
-
-/*
- * Parameter order:
- * rate, prev rate, next rate, prev tgg rate, next tgg rate
- *
- * If there isn't a valid next or previous rate then INV is used which
- * maps to RATE_INVALID
- *
- */
-const struct il3945_rate_info il3945_rates[RATE_COUNT_3945] = {
- IL_DECLARE_RATE_INFO(1, INV, 2, INV, 2, INV, 2), /* 1mbps */
- IL_DECLARE_RATE_INFO(2, 1, 5, 1, 5, 1, 5), /* 2mbps */
- IL_DECLARE_RATE_INFO(5, 2, 6, 2, 11, 2, 11), /*5.5mbps */
- IL_DECLARE_RATE_INFO(11, 9, 12, 5, 12, 5, 18), /* 11mbps */
- IL_DECLARE_RATE_INFO(6, 5, 9, 5, 11, 5, 11), /* 6mbps */
- IL_DECLARE_RATE_INFO(9, 6, 11, 5, 11, 5, 11), /* 9mbps */
- IL_DECLARE_RATE_INFO(12, 11, 18, 11, 18, 11, 18), /* 12mbps */
- IL_DECLARE_RATE_INFO(18, 12, 24, 12, 24, 11, 24), /* 18mbps */
- IL_DECLARE_RATE_INFO(24, 18, 36, 18, 36, 18, 36), /* 24mbps */
- IL_DECLARE_RATE_INFO(36, 24, 48, 24, 48, 24, 48), /* 36mbps */
- IL_DECLARE_RATE_INFO(48, 36, 54, 36, 54, 36, 54), /* 48mbps */
- IL_DECLARE_RATE_INFO(54, 48, INV, 48, INV, 48, INV),/* 54mbps */
-};
-
-static inline u8 il3945_get_prev_ieee_rate(u8 rate_idx)
-{
- u8 rate = il3945_rates[rate_idx].prev_ieee;
-
- if (rate == RATE_INVALID)
- rate = rate_idx;
- return rate;
-}
-
-/* 1 = enable the il3945_disable_events() function */
-#define IL_EVT_DISABLE (0)
-#define IL_EVT_DISABLE_SIZE (1532/32)
-
-/**
- * il3945_disable_events - Disable selected events in uCode event log
- *
- * Disable an event by writing "1"s into "disable"
- * bitmap in SRAM. Bit position corresponds to Event # (id/type).
- * Default values of 0 enable uCode events to be logged.
- * Use for only special debugging. This function is just a placeholder as-is,
- * you'll need to provide the special bits! ...
- * ... and set IL_EVT_DISABLE to 1. */
-void il3945_disable_events(struct il_priv *il)
-{
- int i;
- u32 base; /* SRAM address of event log header */
- u32 disable_ptr; /* SRAM address of event-disable bitmap array */
- u32 array_size; /* # of u32 entries in array */
- static const u32 evt_disable[IL_EVT_DISABLE_SIZE] = {
- 0x00000000, /* 31 - 0 Event id numbers */
- 0x00000000, /* 63 - 32 */
- 0x00000000, /* 95 - 64 */
- 0x00000000, /* 127 - 96 */
- 0x00000000, /* 159 - 128 */
- 0x00000000, /* 191 - 160 */
- 0x00000000, /* 223 - 192 */
- 0x00000000, /* 255 - 224 */
- 0x00000000, /* 287 - 256 */
- 0x00000000, /* 319 - 288 */
- 0x00000000, /* 351 - 320 */
- 0x00000000, /* 383 - 352 */
- 0x00000000, /* 415 - 384 */
- 0x00000000, /* 447 - 416 */
- 0x00000000, /* 479 - 448 */
- 0x00000000, /* 511 - 480 */
- 0x00000000, /* 543 - 512 */
- 0x00000000, /* 575 - 544 */
- 0x00000000, /* 607 - 576 */
- 0x00000000, /* 639 - 608 */
- 0x00000000, /* 671 - 640 */
- 0x00000000, /* 703 - 672 */
- 0x00000000, /* 735 - 704 */
- 0x00000000, /* 767 - 736 */
- 0x00000000, /* 799 - 768 */
- 0x00000000, /* 831 - 800 */
- 0x00000000, /* 863 - 832 */
- 0x00000000, /* 895 - 864 */
- 0x00000000, /* 927 - 896 */
- 0x00000000, /* 959 - 928 */
- 0x00000000, /* 991 - 960 */
- 0x00000000, /* 1023 - 992 */
- 0x00000000, /* 1055 - 1024 */
- 0x00000000, /* 1087 - 1056 */
- 0x00000000, /* 1119 - 1088 */
- 0x00000000, /* 1151 - 1120 */
- 0x00000000, /* 1183 - 1152 */
- 0x00000000, /* 1215 - 1184 */
- 0x00000000, /* 1247 - 1216 */
- 0x00000000, /* 1279 - 1248 */
- 0x00000000, /* 1311 - 1280 */
- 0x00000000, /* 1343 - 1312 */
- 0x00000000, /* 1375 - 1344 */
- 0x00000000, /* 1407 - 1376 */
- 0x00000000, /* 1439 - 1408 */
- 0x00000000, /* 1471 - 1440 */
- 0x00000000, /* 1503 - 1472 */
- };
-
- base = le32_to_cpu(il->card_alive.log_event_table_ptr);
- if (!il3945_hw_valid_rtc_data_addr(base)) {
- IL_ERR("Invalid event log pointer 0x%08X\n", base);
- return;
- }
-
- disable_ptr = il_read_targ_mem(il, base + (4 * sizeof(u32)));
- array_size = il_read_targ_mem(il, base + (5 * sizeof(u32)));
-
- if (IL_EVT_DISABLE && array_size == IL_EVT_DISABLE_SIZE) {
- D_INFO("Disabling selected uCode log events at 0x%x\n",
- disable_ptr);
- for (i = 0; i < IL_EVT_DISABLE_SIZE; i++)
- il_write_targ_mem(il,
- disable_ptr + (i * sizeof(u32)),
- evt_disable[i]);
-
- } else {
- D_INFO("Selected uCode log events may be disabled\n");
- D_INFO(" by writing \"1\"s into disable bitmap\n");
- D_INFO(" in SRAM at 0x%x, size %d u32s\n",
- disable_ptr, array_size);
- }
-
-}
-
-static int il3945_hwrate_to_plcp_idx(u8 plcp)
-{
- int idx;
-
- for (idx = 0; idx < RATE_COUNT_3945; idx++)
- if (il3945_rates[idx].plcp == plcp)
- return idx;
- return -1;
-}
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-#define TX_STATUS_ENTRY(x) case TX_3945_STATUS_FAIL_ ## x: return #x
-
-static const char *il3945_get_tx_fail_reason(u32 status)
-{
- switch (status & TX_STATUS_MSK) {
- case TX_3945_STATUS_SUCCESS:
- return "SUCCESS";
- TX_STATUS_ENTRY(SHORT_LIMIT);
- TX_STATUS_ENTRY(LONG_LIMIT);
- TX_STATUS_ENTRY(FIFO_UNDERRUN);
- TX_STATUS_ENTRY(MGMNT_ABORT);
- TX_STATUS_ENTRY(NEXT_FRAG);
- TX_STATUS_ENTRY(LIFE_EXPIRE);
- TX_STATUS_ENTRY(DEST_PS);
- TX_STATUS_ENTRY(ABORTED);
- TX_STATUS_ENTRY(BT_RETRY);
- TX_STATUS_ENTRY(STA_INVALID);
- TX_STATUS_ENTRY(FRAG_DROPPED);
- TX_STATUS_ENTRY(TID_DISABLE);
- TX_STATUS_ENTRY(FRAME_FLUSHED);
- TX_STATUS_ENTRY(INSUFFICIENT_CF_POLL);
- TX_STATUS_ENTRY(TX_LOCKED);
- TX_STATUS_ENTRY(NO_BEACON_ON_RADAR);
- }
-
- return "UNKNOWN";
-}
-#else
-static inline const char *il3945_get_tx_fail_reason(u32 status)
-{
- return "";
-}
-#endif
-
-/*
- * get ieee prev rate from rate scale table.
- * for A and B mode we need to overright prev
- * value
- */
-int il3945_rs_next_rate(struct il_priv *il, int rate)
-{
- int next_rate = il3945_get_prev_ieee_rate(rate);
-
- switch (il->band) {
- case IEEE80211_BAND_5GHZ:
- if (rate == RATE_12M_IDX)
- next_rate = RATE_9M_IDX;
- else if (rate == RATE_6M_IDX)
- next_rate = RATE_6M_IDX;
- break;
- case IEEE80211_BAND_2GHZ:
- if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
- il_is_associated(il)) {
- if (rate == RATE_11M_IDX)
- next_rate = RATE_5M_IDX;
- }
- break;
-
- default:
- break;
- }
-
- return next_rate;
-}
-
-
-/**
- * il3945_tx_queue_reclaim - Reclaim Tx queue entries already Tx'd
- *
- * When FW advances 'R' idx, all entries between old and new 'R' idx
- * need to be reclaimed. As result, some free space forms. If there is
- * enough free space (> low mark), wake the stack that feeds us.
- */
-static void il3945_tx_queue_reclaim(struct il_priv *il,
- int txq_id, int idx)
-{
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct il_queue *q = &txq->q;
- struct il_tx_info *tx_info;
-
- BUG_ON(txq_id == IL39_CMD_QUEUE_NUM);
-
- for (idx = il_queue_inc_wrap(idx, q->n_bd);
- q->read_ptr != idx;
- q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {
-
- tx_info = &txq->txb[txq->q.read_ptr];
- ieee80211_tx_status_irqsafe(il->hw, tx_info->skb);
- tx_info->skb = NULL;
- il->cfg->ops->lib->txq_free_tfd(il, txq);
- }
-
- if (il_queue_space(q) > q->low_mark && txq_id >= 0 &&
- txq_id != IL39_CMD_QUEUE_NUM && il->mac80211_registered)
- il_wake_queue(il, txq);
-}
-
-/**
- * il3945_rx_reply_tx - Handle Tx response
- */
-static void il3945_rx_reply_tx(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int idx = SEQ_TO_IDX(sequence);
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct ieee80211_tx_info *info;
- struct il3945_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->status);
- int rate_idx;
- int fail;
-
- if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
- IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- idx, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- ieee80211_tx_info_clear_status(info);
-
- /* Fill the MRR chain with some info about on-chip retransmissions */
- rate_idx = il3945_hwrate_to_plcp_idx(tx_resp->rate);
- if (info->band == IEEE80211_BAND_5GHZ)
- rate_idx -= IL_FIRST_OFDM_RATE;
-
- fail = tx_resp->failure_frame;
-
- info->status.rates[0].idx = rate_idx;
- info->status.rates[0].count = fail + 1; /* add final attempt */
-
- /* tx_status->rts_retry_count = tx_resp->failure_rts; */
- info->flags |= ((status & TX_STATUS_MSK) == TX_STATUS_SUCCESS) ?
- IEEE80211_TX_STAT_ACK : 0;
-
- D_TX("Tx queue %d Status %s (0x%08x) plcp rate %d retries %d\n",
- txq_id, il3945_get_tx_fail_reason(status), status,
- tx_resp->rate, tx_resp->failure_frame);
-
- D_TX_REPLY("Tx queue reclaim %d\n", idx);
- il3945_tx_queue_reclaim(il, txq_id, idx);
-
- if (status & TX_ABORT_REQUIRED_MSK)
- IL_ERR("TODO: Implement Tx ABORT REQUIRED!!!\n");
-}
-
-
-
-/*****************************************************************************
- *
- * Intel PRO/Wireless 3945ABG/BG Network Connection
- *
- * RX handler implementations
- *
- *****************************************************************************/
-#ifdef CONFIG_IWLEGACY_DEBUGFS
-static void il3945_accumulative_stats(struct il_priv *il,
- __le32 *stats)
-{
- int i;
- __le32 *prev_stats;
- u32 *accum_stats;
- u32 *delta, *max_delta;
-
- prev_stats = (__le32 *)&il->_3945.stats;
- accum_stats = (u32 *)&il->_3945.accum_stats;
- delta = (u32 *)&il->_3945.delta_stats;
- max_delta = (u32 *)&il->_3945.max_delta;
-
- for (i = sizeof(__le32); i < sizeof(struct il3945_notif_stats);
- i += sizeof(__le32), stats++, prev_stats++, delta++,
- max_delta++, accum_stats++) {
- if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
- *delta = (le32_to_cpu(*stats) -
- le32_to_cpu(*prev_stats));
- *accum_stats += *delta;
- if (*delta > *max_delta)
- *max_delta = *delta;
- }
- }
-
- /* reset accumulative stats for "no-counter" type stats */
- il->_3945.accum_stats.general.temperature =
- il->_3945.stats.general.temperature;
- il->_3945.accum_stats.general.ttl_timestamp =
- il->_3945.stats.general.ttl_timestamp;
-}
-#endif
-
-void il3945_hw_rx_stats(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
-
- D_RX("Statistics notification received (%d vs %d).\n",
- (int)sizeof(struct il3945_notif_stats),
- le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK);
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- il3945_accumulative_stats(il, (__le32 *)&pkt->u.raw);
-#endif
-
- memcpy(&il->_3945.stats, pkt->u.raw, sizeof(il->_3945.stats));
-}
-
-void il3945_reply_stats(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- __le32 *flag = (__le32 *)&pkt->u.raw;
-
- if (le32_to_cpu(*flag) & UCODE_STATISTICS_CLEAR_MSK) {
-#ifdef CONFIG_IWLEGACY_DEBUGFS
- memset(&il->_3945.accum_stats, 0,
- sizeof(struct il3945_notif_stats));
- memset(&il->_3945.delta_stats, 0,
- sizeof(struct il3945_notif_stats));
- memset(&il->_3945.max_delta, 0,
- sizeof(struct il3945_notif_stats));
-#endif
- D_RX("Statistics have been cleared\n");
- }
- il3945_hw_rx_stats(il, rxb);
-}
-
-
-/******************************************************************************
- *
- * Misc. internal state and helper functions
- *
- ******************************************************************************/
-
-/* This is necessary only for a number of stats, see the caller. */
-static int il3945_is_network_packet(struct il_priv *il,
- struct ieee80211_hdr *header)
-{
- /* Filter incoming packets to determine if they are targeted toward
- * this network, discarding packets coming from ourselves */
- switch (il->iw_mode) {
- case NL80211_IFTYPE_ADHOC: /* Header: Dest. | Source | BSSID */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr3, il->bssid);
- case NL80211_IFTYPE_STATION: /* Header: Dest. | AP{BSSID} | Source */
- /* packets to our IBSS update information */
- return !compare_ether_addr(header->addr2, il->bssid);
- default:
- return 1;
- }
-}
-
-static void il3945_pass_packet_to_mac80211(struct il_priv *il,
- struct il_rx_buf *rxb,
- struct ieee80211_rx_status *stats)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
- struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
- struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
- u16 len = le16_to_cpu(rx_hdr->len);
- struct sk_buff *skb;
- __le16 fc = hdr->frame_control;
-
- /* We received data from the HW, so stop the watchdog */
- if (unlikely(len + IL39_RX_FRAME_SIZE >
- PAGE_SIZE << il->hw_params.rx_page_order)) {
- D_DROP("Corruption detected!\n");
- return;
- }
-
- /* We only process data packets if the interface is open */
- if (unlikely(!il->is_open)) {
- D_DROP(
- "Dropping packet while interface is not open.\n");
- return;
- }
-
- skb = dev_alloc_skb(128);
- if (!skb) {
- IL_ERR("dev_alloc_skb failed\n");
- return;
- }
-
- if (!il3945_mod_params.sw_crypto)
- il_set_decrypted_flag(il,
- (struct ieee80211_hdr *)rxb_addr(rxb),
- le32_to_cpu(rx_end->status), stats);
-
- skb_add_rx_frag(skb, 0, rxb->page,
- (void *)rx_hdr->payload - (void *)pkt, len);
-
- il_update_stats(il, false, fc, len);
- memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));
-
- ieee80211_rx(il->hw, skb);
- il->alloc_rxb_page--;
- rxb->page = NULL;
-}
-
-#define IL_DELAY_NEXT_SCAN_AFTER_ASSOC (HZ*6)
-
-static void il3945_rx_reply_rx(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct ieee80211_hdr *header;
- struct ieee80211_rx_status rx_status;
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il3945_rx_frame_stats *rx_stats = IL_RX_STATS(pkt);
- struct il3945_rx_frame_hdr *rx_hdr = IL_RX_HDR(pkt);
- struct il3945_rx_frame_end *rx_end = IL_RX_END(pkt);
- u16 rx_stats_sig_avg __maybe_unused = le16_to_cpu(rx_stats->sig_avg);
- u16 rx_stats_noise_diff __maybe_unused = le16_to_cpu(rx_stats->noise_diff);
- u8 network_packet;
-
- rx_status.flag = 0;
- rx_status.mactime = le64_to_cpu(rx_end->timestamp);
- rx_status.band = (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ?
- IEEE80211_BAND_2GHZ : IEEE80211_BAND_5GHZ;
- rx_status.freq =
- ieee80211_channel_to_frequency(le16_to_cpu(rx_hdr->channel),
- rx_status.band);
-
- rx_status.rate_idx = il3945_hwrate_to_plcp_idx(rx_hdr->rate);
- if (rx_status.band == IEEE80211_BAND_5GHZ)
- rx_status.rate_idx -= IL_FIRST_OFDM_RATE;
-
- rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
- RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
-
- /* set the preamble flag if appropriate */
- if (rx_hdr->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
- rx_status.flag |= RX_FLAG_SHORTPRE;
-
- if ((unlikely(rx_stats->phy_count > 20))) {
- D_DROP("dsp size out of range [0,20]: %d/n",
- rx_stats->phy_count);
- return;
- }
-
- if (!(rx_end->status & RX_RES_STATUS_NO_CRC32_ERROR) ||
- !(rx_end->status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
- D_RX("Bad CRC or FIFO: 0x%08X.\n", rx_end->status);
- return;
- }
-
-
-
- /* Convert 3945's rssi indicator to dBm */
- rx_status.signal = rx_stats->rssi - IL39_RSSI_OFFSET;
-
- D_STATS("Rssi %d sig_avg %d noise_diff %d\n",
- rx_status.signal, rx_stats_sig_avg,
- rx_stats_noise_diff);
-
- header = (struct ieee80211_hdr *)IL_RX_DATA(pkt);
-
- network_packet = il3945_is_network_packet(il, header);
-
- D_STATS("[%c] %d RSSI:%d Signal:%u, Rate:%u\n",
- network_packet ? '*' : ' ',
- le16_to_cpu(rx_hdr->channel),
- rx_status.signal, rx_status.signal,
- rx_status.rate_idx);
-
- il_dbg_log_rx_data_frame(il, le16_to_cpu(rx_hdr->len),
- header);
-
- if (network_packet) {
- il->_3945.last_beacon_time =
- le32_to_cpu(rx_end->beacon_timestamp);
- il->_3945.last_tsf = le64_to_cpu(rx_end->timestamp);
- il->_3945.last_rx_rssi = rx_status.signal;
- }
-
- il3945_pass_packet_to_mac80211(il, rxb, &rx_status);
-}
-
-int il3945_hw_txq_attach_buf_to_tfd(struct il_priv *il,
- struct il_tx_queue *txq,
- dma_addr_t addr, u16 len, u8 reset, u8 pad)
-{
- int count;
- struct il_queue *q;
- struct il3945_tfd *tfd, *tfd_tmp;
-
- q = &txq->q;
- tfd_tmp = (struct il3945_tfd *)txq->tfds;
- tfd = &tfd_tmp[q->write_ptr];
-
- if (reset)
- memset(tfd, 0, sizeof(*tfd));
-
- count = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
-
- if (count >= NUM_TFD_CHUNKS || count < 0) {
- IL_ERR("Error can not send more than %d chunks\n",
- NUM_TFD_CHUNKS);
- return -EINVAL;
- }
-
- tfd->tbs[count].addr = cpu_to_le32(addr);
- tfd->tbs[count].len = cpu_to_le32(len);
-
- count++;
-
- tfd->control_flags = cpu_to_le32(TFD_CTL_COUNT_SET(count) |
- TFD_CTL_PAD_SET(pad));
-
- return 0;
-}
-
-/**
- * il3945_hw_txq_free_tfd - Free one TFD, those at idx [txq->q.read_ptr]
- *
- * Does NOT advance any idxes
- */
-void il3945_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
-{
- struct il3945_tfd *tfd_tmp = (struct il3945_tfd *)txq->tfds;
- int idx = txq->q.read_ptr;
- struct il3945_tfd *tfd = &tfd_tmp[idx];
- struct pci_dev *dev = il->pci_dev;
- int i;
- int counter;
-
- /* sanity check */
- counter = TFD_CTL_COUNT_GET(le32_to_cpu(tfd->control_flags));
- if (counter > NUM_TFD_CHUNKS) {
- IL_ERR("Too many chunks: %i\n", counter);
- /* @todo issue fatal error, it is quite serious situation */
- return;
- }
-
- /* Unmap tx_cmd */
- if (counter)
- pci_unmap_single(dev,
- dma_unmap_addr(&txq->meta[idx], mapping),
- dma_unmap_len(&txq->meta[idx], len),
- PCI_DMA_TODEVICE);
-
- /* unmap chunks if any */
-
- for (i = 1; i < counter; i++)
- pci_unmap_single(dev, le32_to_cpu(tfd->tbs[i].addr),
- le32_to_cpu(tfd->tbs[i].len), PCI_DMA_TODEVICE);
-
- /* free SKB */
- if (txq->txb) {
- struct sk_buff *skb;
-
- skb = txq->txb[txq->q.read_ptr].skb;
-
- /* can be called from irqs-disabled context */
- if (skb) {
- dev_kfree_skb_any(skb);
- txq->txb[txq->q.read_ptr].skb = NULL;
- }
- }
-}
-
-/**
- * il3945_hw_build_tx_cmd_rate - Add rate portion to TX_CMD:
- *
-*/
-void il3945_hw_build_tx_cmd_rate(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr,
- int sta_id, int tx_id)
-{
- u16 hw_value = ieee80211_get_tx_rate(il->hw, info)->hw_value;
- u16 rate_idx = min(hw_value & 0xffff, RATE_COUNT_3945);
- u16 rate_mask;
- int rate;
- u8 rts_retry_limit;
- u8 data_retry_limit;
- __le32 tx_flags;
- __le16 fc = hdr->frame_control;
- struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
-
- rate = il3945_rates[rate_idx].plcp;
- tx_flags = tx_cmd->tx_flags;
-
- /* We need to figure out how to get the sta->supp_rates while
- * in this running context */
- rate_mask = RATES_MASK_3945;
-
- /* Set retry limit on DATA packets and Probe Responses*/
- if (ieee80211_is_probe_resp(fc))
- data_retry_limit = 3;
- else
- data_retry_limit = IL_DEFAULT_TX_RETRY;
- tx_cmd->data_retry_limit = data_retry_limit;
-
- if (tx_id >= IL39_CMD_QUEUE_NUM)
- rts_retry_limit = 3;
- else
- rts_retry_limit = 7;
-
- if (data_retry_limit < rts_retry_limit)
- rts_retry_limit = data_retry_limit;
- tx_cmd->rts_retry_limit = rts_retry_limit;
-
- tx_cmd->rate = rate;
- tx_cmd->tx_flags = tx_flags;
-
- /* OFDM */
- tx_cmd->supp_rates[0] =
- ((rate_mask & IL_OFDM_RATES_MASK) >> IL_FIRST_OFDM_RATE) & 0xFF;
-
- /* CCK */
- tx_cmd->supp_rates[1] = (rate_mask & 0xF);
-
- D_RATE("Tx sta id: %d, rate: %d (plcp), flags: 0x%4X "
- "cck/ofdm mask: 0x%x/0x%x\n", sta_id,
- tx_cmd->rate, le32_to_cpu(tx_cmd->tx_flags),
- tx_cmd->supp_rates[1], tx_cmd->supp_rates[0]);
-}
-
-static u8 il3945_sync_sta(struct il_priv *il, int sta_id, u16 tx_rate)
-{
- unsigned long flags_spin;
- struct il_station_entry *station;
-
- if (sta_id == IL_INVALID_STATION)
- return IL_INVALID_STATION;
-
- spin_lock_irqsave(&il->sta_lock, flags_spin);
- station = &il->stations[sta_id];
-
- station->sta.sta.modify_mask = STA_MODIFY_TX_RATE_MSK;
- station->sta.rate_n_flags = cpu_to_le16(tx_rate);
- station->sta.mode = STA_CONTROL_MODIFY_MSK;
- il_send_add_sta(il, &station->sta, CMD_ASYNC);
- spin_unlock_irqrestore(&il->sta_lock, flags_spin);
-
- D_RATE("SCALE sync station %d to rate %d\n",
- sta_id, tx_rate);
- return sta_id;
-}
-
-static void il3945_set_pwr_vmain(struct il_priv *il)
-{
-/*
- * (for documentation purposes)
- * to set power to V_AUX, do
-
- if (pci_pme_capable(il->pci_dev, PCI_D3cold)) {
- il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- _il_poll_bit(il, CSR_GPIO_IN,
- CSR_GPIO_IN_VAL_VAUX_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000);
- }
- */
-
- il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
- ~APMG_PS_CTRL_MSK_PWR_SRC);
-
- _il_poll_bit(il, CSR_GPIO_IN, CSR_GPIO_IN_VAL_VMAIN_PWR_SRC,
- CSR_GPIO_IN_BIT_AUX_POWER, 5000); /* uS */
-}
-
-static int il3945_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
-{
- il_wr(il, FH39_RCSR_RBD_BASE(0), rxq->bd_dma);
- il_wr(il, FH39_RCSR_RPTR_ADDR(0),
- rxq->rb_stts_dma);
- il_wr(il, FH39_RCSR_WPTR(0), 0);
- il_wr(il, FH39_RCSR_CONFIG(0),
- FH39_RCSR_RX_CONFIG_REG_VAL_DMA_CHNL_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_VAL_RDRBD_EN_ENABLE |
- FH39_RCSR_RX_CONFIG_REG_BIT_WR_STTS_EN |
- FH39_RCSR_RX_CONFIG_REG_VAL_MAX_FRAG_SIZE_128 |
- (RX_QUEUE_SIZE_LOG << FH39_RCSR_RX_CONFIG_REG_POS_RBDC_SIZE) |
- FH39_RCSR_RX_CONFIG_REG_VAL_IRQ_DEST_INT_HOST |
- (1 << FH39_RCSR_RX_CONFIG_REG_POS_IRQ_RBTH) |
- FH39_RCSR_RX_CONFIG_REG_VAL_MSG_MODE_FH);
-
- /* fake read to flush all prev I/O */
- il_rd(il, FH39_RSSR_CTRL);
-
- return 0;
-}
-
-static int il3945_tx_reset(struct il_priv *il)
-{
-
- /* bypass mode */
- il_wr_prph(il, ALM_SCD_MODE_REG, 0x2);
-
- /* RA 0 is active */
- il_wr_prph(il, ALM_SCD_ARASTAT_REG, 0x01);
-
- /* all 6 fifo are active */
- il_wr_prph(il, ALM_SCD_TXFACT_REG, 0x3f);
-
- il_wr_prph(il, ALM_SCD_SBYP_MODE_1_REG, 0x010000);
- il_wr_prph(il, ALM_SCD_SBYP_MODE_2_REG, 0x030002);
- il_wr_prph(il, ALM_SCD_TXF4MF_REG, 0x000004);
- il_wr_prph(il, ALM_SCD_TXF5MF_REG, 0x000005);
-
- il_wr(il, FH39_TSSR_CBB_BASE,
- il->_3945.shared_phys);
-
- il_wr(il, FH39_TSSR_MSG_CONFIG,
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_TXPD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_MAX_FRAG_SIZE_128B |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_SNOOP_RD_TFD_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RD_CBB_ON |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_ORDER_RSP_WAIT_TH |
- FH39_TSSR_TX_MSG_CONFIG_REG_VAL_RSP_WAIT_TH);
-
-
- return 0;
-}
-
-/**
- * il3945_txq_ctx_reset - Reset TX queue context
- *
- * Destroys all DMA structures and initialize them again
- */
-static int il3945_txq_ctx_reset(struct il_priv *il)
-{
- int rc;
- int txq_id, slots_num;
-
- il3945_hw_txq_ctx_free(il);
-
- /* allocate tx queue structure */
- rc = il_alloc_txq_mem(il);
- if (rc)
- return rc;
-
- /* Tx CMD queue */
- rc = il3945_tx_reset(il);
- if (rc)
- goto error;
-
- /* Tx queue(s) */
- for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
- slots_num = (txq_id == IL39_CMD_QUEUE_NUM) ?
- TFD_CMD_SLOTS : TFD_TX_CMD_SLOTS;
- rc = il_tx_queue_init(il, &il->txq[txq_id],
- slots_num, txq_id);
- if (rc) {
- IL_ERR("Tx %d queue init failed\n", txq_id);
- goto error;
- }
- }
-
- return rc;
-
- error:
- il3945_hw_txq_ctx_free(il);
- return rc;
-}
-
-
-/*
- * Start up 3945's basic functionality after it has been reset
- * (e.g. after platform boot, or shutdown via il_apm_stop())
- * NOTE: This does not load uCode nor start the embedded processor
- */
-static int il3945_apm_init(struct il_priv *il)
-{
- int ret = il_apm_init(il);
-
- /* Clear APMG (NIC's internal power management) interrupts */
- il_wr_prph(il, APMG_RTC_INT_MSK_REG, 0x0);
- il_wr_prph(il, APMG_RTC_INT_STT_REG, 0xFFFFFFFF);
-
- /* Reset radio chip */
- il_set_bits_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
- udelay(5);
- il_clear_bits_prph(il, APMG_PS_CTRL_REG,
- APMG_PS_CTRL_VAL_RESET_REQ);
-
- return ret;
-}
-
-static void il3945_nic_config(struct il_priv *il)
-{
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- unsigned long flags;
- u8 rev_id = il->pci_dev->revision;
-
- spin_lock_irqsave(&il->lock, flags);
-
- /* Determine HW type */
- D_INFO("HW Revision ID = 0x%X\n", rev_id);
-
- if (rev_id & PCI_CFG_REV_ID_BIT_RTP)
- D_INFO("RTP type\n");
- else if (rev_id & PCI_CFG_REV_ID_BIT_BASIC_SKU) {
- D_INFO("3945 RADIO-MB type\n");
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MB);
- } else {
- D_INFO("3945 RADIO-MM type\n");
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_3945_MM);
- }
-
- if (EEPROM_SKU_CAP_OP_MODE_MRC == eeprom->sku_cap) {
- D_INFO("SKU OP mode is mrc\n");
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_SKU_MRC);
- } else
- D_INFO("SKU OP mode is basic\n");
-
- if ((eeprom->board_revision & 0xF0) == 0xD0) {
- D_INFO("3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- } else {
- D_INFO("3945ABG revision is 0x%X\n",
- eeprom->board_revision);
- il_clear_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BIT_BOARD_TYPE);
- }
-
- if (eeprom->almgor_m_version <= 1) {
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_A);
- D_INFO("Card M type A version is 0x%X\n",
- eeprom->almgor_m_version);
- } else {
- D_INFO("Card M type B version is 0x%X\n",
- eeprom->almgor_m_version);
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR39_HW_IF_CONFIG_REG_BITS_SILICON_TYPE_B);
- }
- spin_unlock_irqrestore(&il->lock, flags);
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_SW_RF_KILL_ENABLE)
- D_RF_KILL("SW RF KILL supported in EEPROM.\n");
-
- if (eeprom->sku_cap & EEPROM_SKU_CAP_HW_RF_KILL_ENABLE)
- D_RF_KILL("HW RF KILL supported in EEPROM.\n");
-}
-
-int il3945_hw_nic_init(struct il_priv *il)
-{
- int rc;
- unsigned long flags;
- struct il_rx_queue *rxq = &il->rxq;
-
- spin_lock_irqsave(&il->lock, flags);
- il->cfg->ops->lib->apm_ops.init(il);
- spin_unlock_irqrestore(&il->lock, flags);
-
- il3945_set_pwr_vmain(il);
-
- il->cfg->ops->lib->apm_ops.config(il);
-
- /* Allocate the RX queue, or reset if it is already allocated */
- if (!rxq->bd) {
- rc = il_rx_queue_alloc(il);
- if (rc) {
- IL_ERR("Unable to initialize Rx queue\n");
- return -ENOMEM;
- }
- } else
- il3945_rx_queue_reset(il, rxq);
-
- il3945_rx_replenish(il);
-
- il3945_rx_init(il, rxq);
-
-
- /* Look at using this instead:
- rxq->need_update = 1;
- il_rx_queue_update_write_ptr(il, rxq);
- */
-
- il_wr(il, FH39_RCSR_WPTR(0), rxq->write & ~7);
-
- rc = il3945_txq_ctx_reset(il);
- if (rc)
- return rc;
-
- set_bit(STATUS_INIT, &il->status);
-
- return 0;
-}
-
-/**
- * il3945_hw_txq_ctx_free - Free TXQ Context
- *
- * Destroy all TX DMA queues and structures
- */
-void il3945_hw_txq_ctx_free(struct il_priv *il)
-{
- int txq_id;
-
- /* Tx queues */
- if (il->txq)
- for (txq_id = 0; txq_id < il->hw_params.max_txq_num;
- txq_id++)
- if (txq_id == IL39_CMD_QUEUE_NUM)
- il_cmd_queue_free(il);
- else
- il_tx_queue_free(il, txq_id);
-
- /* free tx queue structure */
- il_txq_mem(il);
-}
-
-void il3945_hw_txq_ctx_stop(struct il_priv *il)
-{
- int txq_id;
-
- /* stop SCD */
- il_wr_prph(il, ALM_SCD_MODE_REG, 0);
- il_wr_prph(il, ALM_SCD_TXFACT_REG, 0);
-
- /* reset TFD queues */
- for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
- il_wr(il, FH39_TCSR_CONFIG(txq_id), 0x0);
- il_poll_bit(il, FH39_TSSR_TX_STATUS,
- FH39_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(txq_id),
- 1000);
- }
-
- il3945_hw_txq_ctx_free(il);
-}
-
-/**
- * il3945_hw_reg_adjust_power_by_temp
- * return idx delta into power gain settings table
-*/
-static int il3945_hw_reg_adjust_power_by_temp(int new_reading, int old_reading)
-{
- return (new_reading - old_reading) * (-11) / 100;
-}
-
-/**
- * il3945_hw_reg_temp_out_of_range - Keep temperature in sane range
- */
-static inline int il3945_hw_reg_temp_out_of_range(int temperature)
-{
- return (temperature < -260 || temperature > 25) ? 1 : 0;
-}
-
-int il3945_hw_get_temperature(struct il_priv *il)
-{
- return _il_rd(il, CSR_UCODE_DRV_GP2);
-}
-
-/**
- * il3945_hw_reg_txpower_get_temperature
- * get the current temperature by reading from NIC
-*/
-static int il3945_hw_reg_txpower_get_temperature(struct il_priv *il)
-{
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- int temperature;
-
- temperature = il3945_hw_get_temperature(il);
-
- /* driver's okay range is -260 to +25.
- * human readable okay range is 0 to +285 */
- D_INFO("Temperature: %d\n", temperature + IL_TEMP_CONVERT);
-
- /* handle insane temp reading */
- if (il3945_hw_reg_temp_out_of_range(temperature)) {
- IL_ERR("Error bad temperature value %d\n", temperature);
-
- /* if really really hot(?),
- * substitute the 3rd band/group's temp measured at factory */
- if (il->last_temperature > 100)
- temperature = eeprom->groups[2].temperature;
- else /* else use most recent "sane" value from driver */
- temperature = il->last_temperature;
- }
-
- return temperature; /* raw, not "human readable" */
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold.
- *
- * Both are lower than older versions' 9 degrees */
-#define IL_TEMPERATURE_LIMIT_TIMER 6
-
-/**
- * il3945_is_temp_calib_needed - determines if new calibration is needed
- *
- * records new temperature in tx_mgr->temperature.
- * replaces tx_mgr->last_temperature *only* if calib needed
- * (assumes caller will actually do the calibration!). */
-static int il3945_is_temp_calib_needed(struct il_priv *il)
-{
- int temp_diff;
-
- il->temperature = il3945_hw_reg_txpower_get_temperature(il);
- temp_diff = il->temperature - il->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- D_POWER("Getting cooler, delta %d,\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- D_POWER("Same temp,\n");
- else
- D_POWER("Getting warmer, delta %d,\n", temp_diff);
-
- /* if we don't need calibration, *don't* update last_temperature */
- if (temp_diff < IL_TEMPERATURE_LIMIT_TIMER) {
- D_POWER("Timed thermal calib not needed\n");
- return 0;
- }
-
- D_POWER("Timed thermal calib needed\n");
-
- /* assume that caller will actually do calib ...
- * update the "last temperature" value */
- il->last_temperature = il->temperature;
- return 1;
-}
-
-#define IL_MAX_GAIN_ENTRIES 78
-#define IL_CCK_FROM_OFDM_POWER_DIFF -5
-#define IL_CCK_FROM_OFDM_IDX_DIFF (10)
-
-/* radio and DSP power table, each step is 1/2 dB.
- * 1st number is for RF analog gain, 2nd number is for DSP pre-DAC gain. */
-static struct il3945_tx_power power_gain_table[2][IL_MAX_GAIN_ENTRIES] = {
- {
- {251, 127}, /* 2.4 GHz, highest power */
- {251, 127},
- {251, 127},
- {251, 127},
- {251, 125},
- {251, 110},
- {251, 105},
- {251, 98},
- {187, 125},
- {187, 115},
- {187, 108},
- {187, 99},
- {243, 119},
- {243, 111},
- {243, 105},
- {243, 97},
- {243, 92},
- {211, 106},
- {211, 100},
- {179, 120},
- {179, 113},
- {179, 107},
- {147, 125},
- {147, 119},
- {147, 112},
- {147, 106},
- {147, 101},
- {147, 97},
- {147, 91},
- {115, 107},
- {235, 121},
- {235, 115},
- {235, 109},
- {203, 127},
- {203, 121},
- {203, 115},
- {203, 108},
- {203, 102},
- {203, 96},
- {203, 92},
- {171, 110},
- {171, 104},
- {171, 98},
- {139, 116},
- {227, 125},
- {227, 119},
- {227, 113},
- {227, 107},
- {227, 101},
- {227, 96},
- {195, 113},
- {195, 106},
- {195, 102},
- {195, 95},
- {163, 113},
- {163, 106},
- {163, 102},
- {163, 95},
- {131, 113},
- {131, 106},
- {131, 102},
- {131, 95},
- {99, 113},
- {99, 106},
- {99, 102},
- {99, 95},
- {67, 113},
- {67, 106},
- {67, 102},
- {67, 95},
- {35, 113},
- {35, 106},
- {35, 102},
- {35, 95},
- {3, 113},
- {3, 106},
- {3, 102},
- {3, 95} }, /* 2.4 GHz, lowest power */
- {
- {251, 127}, /* 5.x GHz, highest power */
- {251, 120},
- {251, 114},
- {219, 119},
- {219, 101},
- {187, 113},
- {187, 102},
- {155, 114},
- {155, 103},
- {123, 117},
- {123, 107},
- {123, 99},
- {123, 92},
- {91, 108},
- {59, 125},
- {59, 118},
- {59, 109},
- {59, 102},
- {59, 96},
- {59, 90},
- {27, 104},
- {27, 98},
- {27, 92},
- {115, 118},
- {115, 111},
- {115, 104},
- {83, 126},
- {83, 121},
- {83, 113},
- {83, 105},
- {83, 99},
- {51, 118},
- {51, 111},
- {51, 104},
- {51, 98},
- {19, 116},
- {19, 109},
- {19, 102},
- {19, 98},
- {19, 93},
- {171, 113},
- {171, 107},
- {171, 99},
- {139, 120},
- {139, 113},
- {139, 107},
- {139, 99},
- {107, 120},
- {107, 113},
- {107, 107},
- {107, 99},
- {75, 120},
- {75, 113},
- {75, 107},
- {75, 99},
- {43, 120},
- {43, 113},
- {43, 107},
- {43, 99},
- {11, 120},
- {11, 113},
- {11, 107},
- {11, 99},
- {131, 107},
- {131, 99},
- {99, 120},
- {99, 113},
- {99, 107},
- {99, 99},
- {67, 120},
- {67, 113},
- {67, 107},
- {67, 99},
- {35, 120},
- {35, 113},
- {35, 107},
- {35, 99},
- {3, 120} } /* 5.x GHz, lowest power */
-};
-
-static inline u8 il3945_hw_reg_fix_power_idx(int idx)
-{
- if (idx < 0)
- return 0;
- if (idx >= IL_MAX_GAIN_ENTRIES)
- return IL_MAX_GAIN_ENTRIES - 1;
- return (u8) idx;
-}
-
-/* Kick off thermal recalibration check every 60 seconds */
-#define REG_RECALIB_PERIOD (60)
-
-/**
- * il3945_hw_reg_set_scan_power - Set Tx power for scan probe requests
- *
- * Set (in our channel info database) the direct scan Tx power for 1 Mbit (CCK)
- * or 6 Mbit (OFDM) rates.
- */
-static void il3945_hw_reg_set_scan_power(struct il_priv *il, u32 scan_tbl_idx,
- s32 rate_idx, const s8 *clip_pwrs,
- struct il_channel_info *ch_info,
- int band_idx)
-{
- struct il3945_scan_power_info *scan_power_info;
- s8 power;
- u8 power_idx;
-
- scan_power_info = &ch_info->scan_pwr_info[scan_tbl_idx];
-
- /* use this channel group's 6Mbit clipping/saturation pwr,
- * but cap at regulatory scan power restriction (set during init
- * based on eeprom channel data) for this channel. */
- power = min(ch_info->scan_power, clip_pwrs[RATE_6M_IDX_TBL]);
-
- power = min(power, il->tx_power_user_lmt);
- scan_power_info->requested_power = power;
-
- /* find difference between new scan *power* and current "normal"
- * Tx *power* for 6Mb. Use this difference (x2) to adjust the
- * current "normal" temperature-compensated Tx power *idx* for
- * this rate (1Mb or 6Mb) to yield new temp-compensated scan power
- * *idx*. */
- power_idx = ch_info->power_info[rate_idx].power_table_idx
- - (power - ch_info->power_info
- [RATE_6M_IDX_TBL].requested_power) * 2;
-
- /* store reference idx that we use when adjusting *all* scan
- * powers. So we can accommodate user (all channel) or spectrum
- * management (single channel) power changes "between" temperature
- * feedback compensation procedures.
- * don't force fit this reference idx into gain table; it may be a
- * negative number. This will help avoid errors when we're at
- * the lower bounds (highest gains, for warmest temperatures)
- * of the table. */
-
- /* don't exceed table bounds for "real" setting */
- power_idx = il3945_hw_reg_fix_power_idx(power_idx);
-
- scan_power_info->power_table_idx = power_idx;
- scan_power_info->tpc.tx_gain =
- power_gain_table[band_idx][power_idx].tx_gain;
- scan_power_info->tpc.dsp_atten =
- power_gain_table[band_idx][power_idx].dsp_atten;
-}
-
-/**
- * il3945_send_tx_power - fill in Tx Power command with gain settings
- *
- * Configures power settings for all rates for the current channel,
- * using values from channel info struct, and send to NIC
- */
-static int il3945_send_tx_power(struct il_priv *il)
-{
- int rate_idx, i;
- const struct il_channel_info *ch_info = NULL;
- struct il3945_txpowertable_cmd txpower = {
- .channel = il->ctx.active.channel,
- };
- u16 chan;
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- chan = le16_to_cpu(il->ctx.active.channel);
-
- txpower.band = (il->band == IEEE80211_BAND_5GHZ) ? 0 : 1;
- ch_info = il_get_channel_info(il, il->band, chan);
- if (!ch_info) {
- IL_ERR(
- "Failed to get channel info for channel %d [%d]\n",
- chan, il->band);
- return -EINVAL;
- }
-
- if (!il_is_channel_valid(ch_info)) {
- D_POWER("Not calling TX_PWR_TBL_CMD on "
- "non-Tx channel.\n");
- return 0;
- }
-
- /* fill cmd with power settings for all rates for current channel */
- /* Fill OFDM rate */
- for (rate_idx = IL_FIRST_OFDM_RATE, i = 0;
- rate_idx <= IL39_LAST_OFDM_RATE; rate_idx++, i++) {
-
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = il3945_rates[rate_idx].plcp;
-
- D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
- /* Fill CCK rates */
- for (rate_idx = IL_FIRST_CCK_RATE;
- rate_idx <= IL_LAST_CCK_RATE; rate_idx++, i++) {
- txpower.power[i].tpc = ch_info->power_info[i].tpc;
- txpower.power[i].rate = il3945_rates[rate_idx].plcp;
-
- D_POWER("ch %d:%d rf %d dsp %3d rate code 0x%02x\n",
- le16_to_cpu(txpower.channel),
- txpower.band,
- txpower.power[i].tpc.tx_gain,
- txpower.power[i].tpc.dsp_atten,
- txpower.power[i].rate);
- }
-
- return il_send_cmd_pdu(il, REPLY_TX_PWR_TBL_CMD,
- sizeof(struct il3945_txpowertable_cmd),
- &txpower);
-
-}
-
-/**
- * il3945_hw_reg_set_new_power - Configures power tables at new levels
- * @ch_info: Channel to update. Uses power_info.requested_power.
- *
- * Replace requested_power and base_power_idx ch_info fields for
- * one channel.
- *
- * Called if user or spectrum management changes power preferences.
- * Takes into account h/w and modulation limitations (clip power).
- *
- * This does *not* send anything to NIC, just sets up ch_info for one channel.
- *
- * NOTE: reg_compensate_for_temperature_dif() *must* be run after this to
- * properly fill out the scan powers, and actual h/w gain settings,
- * and send changes to NIC
- */
-static int il3945_hw_reg_set_new_power(struct il_priv *il,
- struct il_channel_info *ch_info)
-{
- struct il3945_channel_power_info *power_info;
- int power_changed = 0;
- int i;
- const s8 *clip_pwrs;
- int power;
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
-
- /* Get this channel's rate-to-current-power settings table */
- power_info = ch_info->power_info;
-
- /* update OFDM Txpower settings */
- for (i = RATE_6M_IDX_TBL; i <= RATE_54M_IDX_TBL;
- i++, ++power_info) {
- int delta_idx;
-
- /* limit new power to be no more than h/w capability */
- power = min(ch_info->curr_txpow, clip_pwrs[i]);
- if (power == power_info->requested_power)
- continue;
-
- /* find difference between old and new requested powers,
- * update base (non-temp-compensated) power idx */
- delta_idx = (power - power_info->requested_power) * 2;
- power_info->base_power_idx -= delta_idx;
-
- /* save new requested power value */
- power_info->requested_power = power;
-
- power_changed = 1;
- }
-
- /* update CCK Txpower settings, based on OFDM 12M setting ...
- * ... all CCK power settings for a given channel are the *same*. */
- if (power_changed) {
- power =
- ch_info->power_info[RATE_12M_IDX_TBL].
- requested_power + IL_CCK_FROM_OFDM_POWER_DIFF;
-
- /* do all CCK rates' il3945_channel_power_info structures */
- for (i = RATE_1M_IDX_TBL; i <= RATE_11M_IDX_TBL; i++) {
- power_info->requested_power = power;
- power_info->base_power_idx =
- ch_info->power_info[RATE_12M_IDX_TBL].
- base_power_idx + IL_CCK_FROM_OFDM_IDX_DIFF;
- ++power_info;
- }
- }
-
- return 0;
-}
-
-/**
- * il3945_hw_reg_get_ch_txpower_limit - returns new power limit for channel
- *
- * NOTE: Returned power limit may be less (but not more) than requested,
- * based strictly on regulatory (eeprom and spectrum mgt) limitations
- * (no consideration for h/w clipping limitations).
- */
-static int il3945_hw_reg_get_ch_txpower_limit(struct il_channel_info *ch_info)
-{
- s8 max_power;
-
-#if 0
- /* if we're using TGd limits, use lower of TGd or EEPROM */
- if (ch_info->tgd_data.max_power != 0)
- max_power = min(ch_info->tgd_data.max_power,
- ch_info->eeprom.max_power_avg);
-
- /* else just use EEPROM limits */
- else
-#endif
- max_power = ch_info->eeprom.max_power_avg;
-
- return min(max_power, ch_info->max_power_avg);
-}
-
-/**
- * il3945_hw_reg_comp_txpower_temp - Compensate for temperature
- *
- * Compensate txpower settings of *all* channels for temperature.
- * This only accounts for the difference between current temperature
- * and the factory calibration temperatures, and bases the new settings
- * on the channel's base_power_idx.
- *
- * If RxOn is "associated", this sends the new Txpower to NIC!
- */
-static int il3945_hw_reg_comp_txpower_temp(struct il_priv *il)
-{
- struct il_channel_info *ch_info = NULL;
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- int delta_idx;
- const s8 *clip_pwrs; /* array of h/w max power levels for each rate */
- u8 a_band;
- u8 rate_idx;
- u8 scan_tbl_idx;
- u8 i;
- int ref_temp;
- int temperature = il->temperature;
-
- if (il->disable_tx_power_cal ||
- test_bit(STATUS_SCANNING, &il->status)) {
- /* do not perform tx power calibration */
- return 0;
- }
- /* set up new Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0; i < il->channel_count; i++) {
- ch_info = &il->channel_info[i];
- a_band = il_is_channel_a_band(ch_info);
-
- /* Get this chnlgrp's factory calibration temperature */
- ref_temp = (s16)eeprom->groups[ch_info->group_idx].
- temperature;
-
- /* get power idx adjustment based on current and factory
- * temps */
- delta_idx = il3945_hw_reg_adjust_power_by_temp(temperature,
- ref_temp);
-
- /* set tx power value for all rates, OFDM and CCK */
- for (rate_idx = 0; rate_idx < RATE_COUNT_3945;
- rate_idx++) {
- int power_idx =
- ch_info->power_info[rate_idx].base_power_idx;
-
- /* temperature compensate */
- power_idx += delta_idx;
-
- /* stay within table range */
- power_idx = il3945_hw_reg_fix_power_idx(power_idx);
- ch_info->power_info[rate_idx].
- power_table_idx = (u8) power_idx;
- ch_info->power_info[rate_idx].tpc =
- power_gain_table[a_band][power_idx];
- }
-
- /* Get this chnlgrp's rate-to-max/clip-powers table */
- clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_idx = 0;
- scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
- s32 actual_idx = (scan_tbl_idx == 0) ?
- RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
- il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
- actual_idx, clip_pwrs,
- ch_info, a_band);
- }
- }
-
- /* send Txpower command for current channel to ucode */
- return il->cfg->ops->lib->send_tx_power(il);
-}
-
-int il3945_hw_reg_set_txpower(struct il_priv *il, s8 power)
-{
- struct il_channel_info *ch_info;
- s8 max_power;
- u8 a_band;
- u8 i;
-
- if (il->tx_power_user_lmt == power) {
- D_POWER("Requested Tx power same as current "
- "limit: %ddBm.\n", power);
- return 0;
- }
-
- D_POWER("Setting upper limit clamp to %ddBm.\n", power);
- il->tx_power_user_lmt = power;
-
- /* set up new Tx powers for each and every channel, 2.4 and 5.x */
-
- for (i = 0; i < il->channel_count; i++) {
- ch_info = &il->channel_info[i];
- a_band = il_is_channel_a_band(ch_info);
-
- /* find minimum power of all user and regulatory constraints
- * (does not consider h/w clipping limitations) */
- max_power = il3945_hw_reg_get_ch_txpower_limit(ch_info);
- max_power = min(power, max_power);
- if (max_power != ch_info->curr_txpow) {
- ch_info->curr_txpow = max_power;
-
- /* this considers the h/w clipping limitations */
- il3945_hw_reg_set_new_power(il, ch_info);
- }
- }
-
- /* update txpower settings for all channels,
- * send to NIC if associated. */
- il3945_is_temp_calib_needed(il);
- il3945_hw_reg_comp_txpower_temp(il);
-
- return 0;
-}
-
-static int il3945_send_rxon_assoc(struct il_priv *il,
- struct il_rxon_context *ctx)
-{
- int rc = 0;
- struct il_rx_pkt *pkt;
- struct il3945_rxon_assoc_cmd rxon_assoc;
- struct il_host_cmd cmd = {
- .id = REPLY_RXON_ASSOC,
- .len = sizeof(rxon_assoc),
- .flags = CMD_WANT_SKB,
- .data = &rxon_assoc,
- };
- const struct il_rxon_cmd *rxon1 = &ctx->staging;
- const struct il_rxon_cmd *rxon2 = &ctx->active;
-
- if (rxon1->flags == rxon2->flags &&
- rxon1->filter_flags == rxon2->filter_flags &&
- rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
- rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
- D_INFO("Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
-
- rc = il_send_cmd_sync(il, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct il_rx_pkt *)cmd.reply_page;
- if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
- IL_ERR("Bad return from REPLY_RXON_ASSOC command\n");
- rc = -EIO;
- }
-
- il_free_pages(il, cmd.reply_page);
-
- return rc;
-}
-
-/**
- * il3945_commit_rxon - commit staging_rxon to hardware
- *
- * The RXON command in staging_rxon is committed to the hardware and
- * the active_rxon structure is updated with the new data. This
- * function correctly transitions out of the RXON_ASSOC_MSK state if
- * a HW tune is required based on the RXON structure changes.
- */
-int il3945_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct il3945_rxon_cmd *active_rxon = (void *)&ctx->active;
- struct il3945_rxon_cmd *staging_rxon = (void *)&ctx->staging;
- int rc = 0;
- bool new_assoc = !!(staging_rxon->filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return -EINVAL;
-
- if (!il_is_alive(il))
- return -1;
-
- /* always get timestamp with Rx frame */
- staging_rxon->flags |= RXON_FLG_TSF2HOST_MSK;
-
- /* select antenna */
- staging_rxon->flags &=
- ~(RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_SEL_MSK);
- staging_rxon->flags |= il3945_get_antenna_flags(il);
-
- rc = il_check_rxon_cmd(il, ctx);
- if (rc) {
- IL_ERR("Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /* If we don't need to send a full RXON, we can use
- * il3945_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!il_full_rxon_required(il,
- &il->ctx)) {
- rc = il_send_rxon_assoc(il,
- &il->ctx);
- if (rc) {
- IL_ERR("Error setting RXON_ASSOC "
- "configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
- /*
- * We do not commit tx power settings while channel changing,
- * do it now if tx power changed.
- */
- il_set_tx_power(il, il->tx_power_next, false);
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (il_is_associated(il) && new_assoc) {
- D_INFO("Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- active_rxon->reserved4 = 0;
- active_rxon->reserved5 = 0;
- rc = il_send_cmd_pdu(il, REPLY_RXON,
- sizeof(struct il3945_rxon_cmd),
- &il->ctx.active);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (rc) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IL_ERR("Error clearing ASSOC_MSK on current "
- "configuration (%d).\n", rc);
- return rc;
- }
- il_clear_ucode_stations(il,
- &il->ctx);
- il_restore_stations(il,
- &il->ctx);
- }
-
- D_INFO("Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(staging_rxon->channel),
- staging_rxon->bssid_addr);
-
- /*
- * reserved4 and 5 could have been filled by the iwlcore code.
- * Let's clear them before pushing to the 3945.
- */
- staging_rxon->reserved4 = 0;
- staging_rxon->reserved5 = 0;
-
- il_set_rxon_hwcrypto(il, ctx, !il3945_mod_params.sw_crypto);
-
- /* Apply the new configuration */
- rc = il_send_cmd_pdu(il, REPLY_RXON,
- sizeof(struct il3945_rxon_cmd),
- staging_rxon);
- if (rc) {
- IL_ERR("Error setting new configuration (%d).\n", rc);
- return rc;
- }
-
- memcpy(active_rxon, staging_rxon, sizeof(*active_rxon));
-
- if (!new_assoc) {
- il_clear_ucode_stations(il,
- &il->ctx);
- il_restore_stations(il,
- &il->ctx);
- }
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- rc = il_set_tx_power(il, il->tx_power_next, true);
- if (rc) {
- IL_ERR("Error setting Tx power (%d).\n", rc);
- return rc;
- }
-
- /* Init the hardware's rate fallback order based on the band */
- rc = il3945_init_hw_rate_table(il);
- if (rc) {
- IL_ERR("Error setting HW rate table: %02X\n", rc);
- return -EIO;
- }
-
- return 0;
-}
-
-/**
- * il3945_reg_txpower_periodic - called when time to check our temperature.
- *
- * -- reset periodic timer
- * -- see if temp has changed enough to warrant re-calibration ... if so:
- * -- correct coeffs for temp (can reset temp timer)
- * -- save this temp as "last",
- * -- send new set of gain settings to NIC
- * NOTE: This should continue working, even when we're not associated,
- * so we can keep our internal table of scan powers current. */
-void il3945_reg_txpower_periodic(struct il_priv *il)
-{
- /* This will kick in the "brute force"
- * il3945_hw_reg_comp_txpower_temp() below */
- if (!il3945_is_temp_calib_needed(il))
- goto reschedule;
-
- /* Set up a new set of temp-adjusted TxPowers, send to NIC.
- * This is based *only* on current temperature,
- * ignoring any previous power measurements */
- il3945_hw_reg_comp_txpower_temp(il);
-
- reschedule:
- queue_delayed_work(il->workqueue,
- &il->_3945.thermal_periodic, REG_RECALIB_PERIOD * HZ);
-}
-
-static void il3945_bg_reg_txpower_periodic(struct work_struct *work)
-{
- struct il_priv *il = container_of(work, struct il_priv,
- _3945.thermal_periodic.work);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- mutex_lock(&il->mutex);
- il3945_reg_txpower_periodic(il);
- mutex_unlock(&il->mutex);
-}
-
-/**
- * il3945_hw_reg_get_ch_grp_idx - find the channel-group idx (0-4)
- * for the channel.
- *
- * This function is used when initializing channel-info structs.
- *
- * NOTE: These channel groups do *NOT* match the bands above!
- * These channel groups are based on factory-tested channels;
- * on A-band, EEPROM's "group frequency" entries represent the top
- * channel in each group 1-4. Group 5 All B/G channels are in group 0.
- */
-static u16 il3945_hw_reg_get_ch_grp_idx(struct il_priv *il,
- const struct il_channel_info *ch_info)
-{
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- struct il3945_eeprom_txpower_group *ch_grp = &eeprom->groups[0];
- u8 group;
- u16 group_idx = 0; /* based on factory calib frequencies */
- u8 grp_channel;
-
- /* Find the group idx for the channel ... don't use idx 1(?) */
- if (il_is_channel_a_band(ch_info)) {
- for (group = 1; group < 5; group++) {
- grp_channel = ch_grp[group].group_channel;
- if (ch_info->channel <= grp_channel) {
- group_idx = group;
- break;
- }
- }
- /* group 4 has a few channels *above* its factory cal freq */
- if (group == 5)
- group_idx = 4;
- } else
- group_idx = 0; /* 2.4 GHz, group 0 */
-
- D_POWER("Chnl %d mapped to grp %d\n", ch_info->channel,
- group_idx);
- return group_idx;
-}
-
-/**
- * il3945_hw_reg_get_matched_power_idx - Interpolate to get nominal idx
- *
- * Interpolate to get nominal (i.e. at factory calibration temperature) idx
- * into radio/DSP gain settings table for requested power.
- */
-static int il3945_hw_reg_get_matched_power_idx(struct il_priv *il,
- s8 requested_power,
- s32 setting_idx, s32 *new_idx)
-{
- const struct il3945_eeprom_txpower_group *chnl_grp = NULL;
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- s32 idx0, idx1;
- s32 power = 2 * requested_power;
- s32 i;
- const struct il3945_eeprom_txpower_sample *samples;
- s32 gains0, gains1;
- s32 res;
- s32 denominator;
-
- chnl_grp = &eeprom->groups[setting_idx];
- samples = chnl_grp->samples;
- for (i = 0; i < 5; i++) {
- if (power == samples[i].power) {
- *new_idx = samples[i].gain_idx;
- return 0;
- }
- }
-
- if (power > samples[1].power) {
- idx0 = 0;
- idx1 = 1;
- } else if (power > samples[2].power) {
- idx0 = 1;
- idx1 = 2;
- } else if (power > samples[3].power) {
- idx0 = 2;
- idx1 = 3;
- } else {
- idx0 = 3;
- idx1 = 4;
- }
-
- denominator = (s32) samples[idx1].power - (s32) samples[idx0].power;
- if (denominator == 0)
- return -EINVAL;
- gains0 = (s32) samples[idx0].gain_idx * (1 << 19);
- gains1 = (s32) samples[idx1].gain_idx * (1 << 19);
- res = gains0 + (gains1 - gains0) *
- ((s32) power - (s32) samples[idx0].power) / denominator +
- (1 << 18);
- *new_idx = res >> 19;
- return 0;
-}
-
-static void il3945_hw_reg_init_channel_groups(struct il_priv *il)
-{
- u32 i;
- s32 rate_idx;
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- const struct il3945_eeprom_txpower_group *group;
-
- D_POWER("Initializing factory calib info from EEPROM\n");
-
- for (i = 0; i < IL_NUM_TX_CALIB_GROUPS; i++) {
- s8 *clip_pwrs; /* table of power levels for each rate */
- s8 satur_pwr; /* saturation power for each chnl group */
- group = &eeprom->groups[i];
-
- /* sanity check on factory saturation power value */
- if (group->saturation_power < 40) {
- IL_WARN("Error: saturation power is %d, "
- "less than minimum expected 40\n",
- group->saturation_power);
- return;
- }
-
- /*
- * Derive requested power levels for each rate, based on
- * hardware capabilities (saturation power for band).
- * Basic value is 3dB down from saturation, with further
- * power reductions for highest 3 data rates. These
- * backoffs provide headroom for high rate modulation
- * power peaks, without too much distortion (clipping).
- */
- /* we'll fill in this array with h/w max power levels */
- clip_pwrs = (s8 *) il->_3945.clip_groups[i].clip_powers;
-
- /* divide factory saturation power by 2 to find -3dB level */
- satur_pwr = (s8) (group->saturation_power >> 1);
-
- /* fill in channel group's nominal powers for each rate */
- for (rate_idx = 0;
- rate_idx < RATE_COUNT_3945; rate_idx++, clip_pwrs++) {
- switch (rate_idx) {
- case RATE_36M_IDX_TBL:
- if (i == 0) /* B/G */
- *clip_pwrs = satur_pwr;
- else /* A */
- *clip_pwrs = satur_pwr - 5;
- break;
- case RATE_48M_IDX_TBL:
- if (i == 0)
- *clip_pwrs = satur_pwr - 7;
- else
- *clip_pwrs = satur_pwr - 10;
- break;
- case RATE_54M_IDX_TBL:
- if (i == 0)
- *clip_pwrs = satur_pwr - 9;
- else
- *clip_pwrs = satur_pwr - 12;
- break;
- default:
- *clip_pwrs = satur_pwr;
- break;
- }
- }
- }
-}
-
-/**
- * il3945_txpower_set_from_eeprom - Set channel power info based on EEPROM
- *
- * Second pass (during init) to set up il->channel_info
- *
- * Set up Tx-power settings in our channel info database for each VALID
- * (for this geo/SKU) channel, at all Tx data rates, based on eeprom values
- * and current temperature.
- *
- * Since this is based on current temperature (at init time), these values may
- * not be valid for very long, but it gives us a starting/default point,
- * and allows us to active (i.e. using Tx) scan.
- *
- * This does *not* write values to NIC, just sets up our internal table.
- */
-int il3945_txpower_set_from_eeprom(struct il_priv *il)
-{
- struct il_channel_info *ch_info = NULL;
- struct il3945_channel_power_info *pwr_info;
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
- int delta_idx;
- u8 rate_idx;
- u8 scan_tbl_idx;
- const s8 *clip_pwrs; /* array of power levels for each rate */
- u8 gain, dsp_atten;
- s8 power;
- u8 pwr_idx, base_pwr_idx, a_band;
- u8 i;
- int temperature;
-
- /* save temperature reference,
- * so we can determine next time to calibrate */
- temperature = il3945_hw_reg_txpower_get_temperature(il);
- il->last_temperature = temperature;
-
- il3945_hw_reg_init_channel_groups(il);
-
- /* initialize Tx power info for each and every channel, 2.4 and 5.x */
- for (i = 0, ch_info = il->channel_info; i < il->channel_count;
- i++, ch_info++) {
- a_band = il_is_channel_a_band(ch_info);
- if (!il_is_channel_valid(ch_info))
- continue;
-
- /* find this channel's channel group (*not* "band") idx */
- ch_info->group_idx =
- il3945_hw_reg_get_ch_grp_idx(il, ch_info);
-
- /* Get this chnlgrp's rate->max/clip-powers table */
- clip_pwrs = il->_3945.clip_groups[ch_info->group_idx].clip_powers;
-
- /* calculate power idx *adjustment* value according to
- * diff between current temperature and factory temperature */
- delta_idx = il3945_hw_reg_adjust_power_by_temp(temperature,
- eeprom->groups[ch_info->group_idx].
- temperature);
-
- D_POWER("Delta idx for channel %d: %d [%d]\n",
- ch_info->channel, delta_idx, temperature +
- IL_TEMP_CONVERT);
-
- /* set tx power value for all OFDM rates */
- for (rate_idx = 0; rate_idx < IL_OFDM_RATES;
- rate_idx++) {
- s32 uninitialized_var(power_idx);
- int rc;
-
- /* use channel group's clip-power table,
- * but don't exceed channel's max power */
- s8 pwr = min(ch_info->max_power_avg,
- clip_pwrs[rate_idx]);
-
- pwr_info = &ch_info->power_info[rate_idx];
-
- /* get base (i.e. at factory-measured temperature)
- * power table idx for this rate's power */
- rc = il3945_hw_reg_get_matched_power_idx(il, pwr,
- ch_info->group_idx,
- &power_idx);
- if (rc) {
- IL_ERR("Invalid power idx\n");
- return rc;
- }
- pwr_info->base_power_idx = (u8) power_idx;
-
- /* temperature compensate */
- power_idx += delta_idx;
-
- /* stay within range of gain table */
- power_idx = il3945_hw_reg_fix_power_idx(power_idx);
-
- /* fill 1 OFDM rate's il3945_channel_power_info struct */
- pwr_info->requested_power = pwr;
- pwr_info->power_table_idx = (u8) power_idx;
- pwr_info->tpc.tx_gain =
- power_gain_table[a_band][power_idx].tx_gain;
- pwr_info->tpc.dsp_atten =
- power_gain_table[a_band][power_idx].dsp_atten;
- }
-
- /* set tx power for CCK rates, based on OFDM 12 Mbit settings*/
- pwr_info = &ch_info->power_info[RATE_12M_IDX_TBL];
- power = pwr_info->requested_power +
- IL_CCK_FROM_OFDM_POWER_DIFF;
- pwr_idx = pwr_info->power_table_idx +
- IL_CCK_FROM_OFDM_IDX_DIFF;
- base_pwr_idx = pwr_info->base_power_idx +
- IL_CCK_FROM_OFDM_IDX_DIFF;
-
- /* stay within table range */
- pwr_idx = il3945_hw_reg_fix_power_idx(pwr_idx);
- gain = power_gain_table[a_band][pwr_idx].tx_gain;
- dsp_atten = power_gain_table[a_band][pwr_idx].dsp_atten;
-
- /* fill each CCK rate's il3945_channel_power_info structure
- * NOTE: All CCK-rate Txpwrs are the same for a given chnl!
- * NOTE: CCK rates start at end of OFDM rates! */
- for (rate_idx = 0;
- rate_idx < IL_CCK_RATES; rate_idx++) {
- pwr_info = &ch_info->power_info[rate_idx+IL_OFDM_RATES];
- pwr_info->requested_power = power;
- pwr_info->power_table_idx = pwr_idx;
- pwr_info->base_power_idx = base_pwr_idx;
- pwr_info->tpc.tx_gain = gain;
- pwr_info->tpc.dsp_atten = dsp_atten;
- }
-
- /* set scan tx power, 1Mbit for CCK, 6Mbit for OFDM */
- for (scan_tbl_idx = 0;
- scan_tbl_idx < IL_NUM_SCAN_RATES; scan_tbl_idx++) {
- s32 actual_idx = (scan_tbl_idx == 0) ?
- RATE_1M_IDX_TBL : RATE_6M_IDX_TBL;
- il3945_hw_reg_set_scan_power(il, scan_tbl_idx,
- actual_idx, clip_pwrs, ch_info, a_band);
- }
- }
-
- return 0;
-}
-
-int il3945_hw_rxq_stop(struct il_priv *il)
-{
- int rc;
-
- il_wr(il, FH39_RCSR_CONFIG(0), 0);
- rc = il_poll_bit(il, FH39_RSSR_STATUS,
- FH39_RSSR_CHNL0_RX_STATUS_CHNL_IDLE, 1000);
- if (rc < 0)
- IL_ERR("Can't stop Rx DMA.\n");
-
- return 0;
-}
-
-int il3945_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
-{
- int txq_id = txq->q.id;
-
- struct il3945_shared *shared_data = il->_3945.shared_virt;
-
- shared_data->tx_base_ptr[txq_id] = cpu_to_le32((u32)txq->q.dma_addr);
-
- il_wr(il, FH39_CBCC_CTRL(txq_id), 0);
- il_wr(il, FH39_CBCC_BASE(txq_id), 0);
-
- il_wr(il, FH39_TCSR_CONFIG(txq_id),
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_RTC_NOINT |
- FH39_TCSR_TX_CONFIG_REG_VAL_MSG_MODE_TXF |
- FH39_TCSR_TX_CONFIG_REG_VAL_CIRQ_HOST_IFTFD |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE_VAL |
- FH39_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE);
-
- /* fake read to flush all prev. writes */
- _il_rd(il, FH39_TSSR_CBB_BASE);
-
- return 0;
-}
-
-/*
- * HCMD utils
- */
-static u16 il3945_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return sizeof(struct il3945_rxon_cmd);
- case POWER_TBL_CMD:
- return sizeof(struct il3945_powertable_cmd);
- default:
- return len;
- }
-}
-
-
-static u16 il3945_build_addsta_hcmd(const struct il_addsta_cmd *cmd,
- u8 *data)
-{
- struct il3945_addsta_cmd *addsta = (struct il3945_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cpu_to_le16(0);
- addsta->rate_n_flags = cmd->rate_n_flags;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
-
- return (u16)sizeof(struct il3945_addsta_cmd);
-}
-
-static int il3945_add_bssid_station(struct il_priv *il,
- const u8 *addr, u8 *sta_id_r)
-{
- struct il_rxon_context *ctx = &il->ctx;
- int ret;
- u8 sta_id;
- unsigned long flags;
-
- if (sta_id_r)
- *sta_id_r = IL_INVALID_STATION;
-
- ret = il_add_station_common(il, ctx, addr, 0, NULL, &sta_id);
- if (ret) {
- IL_ERR("Unable to add station %pM\n", addr);
- return ret;
- }
-
- if (sta_id_r)
- *sta_id_r = sta_id;
-
- spin_lock_irqsave(&il->sta_lock, flags);
- il->stations[sta_id].used |= IL_STA_LOCAL;
- spin_unlock_irqrestore(&il->sta_lock, flags);
-
- return 0;
-}
-static int il3945_manage_ibss_station(struct il_priv *il,
- struct ieee80211_vif *vif, bool add)
-{
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
- int ret;
-
- if (add) {
- ret = il3945_add_bssid_station(il, vif->bss_conf.bssid,
- &vif_priv->ibss_bssid_sta_id);
- if (ret)
- return ret;
-
- il3945_sync_sta(il, vif_priv->ibss_bssid_sta_id,
- (il->band == IEEE80211_BAND_5GHZ) ?
- RATE_6M_PLCP : RATE_1M_PLCP);
- il3945_rate_scale_init(il->hw, vif_priv->ibss_bssid_sta_id);
-
- return 0;
- }
-
- return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
- vif->bss_conf.bssid);
-}
-
-/**
- * il3945_init_hw_rate_table - Initialize the hardware rate fallback table
- */
-int il3945_init_hw_rate_table(struct il_priv *il)
-{
- int rc, i, idx, prev_idx;
- struct il3945_rate_scaling_cmd rate_cmd = {
- .reserved = {0, 0, 0},
- };
- struct il3945_rate_scaling_info *table = rate_cmd.table;
-
- for (i = 0; i < ARRAY_SIZE(il3945_rates); i++) {
- idx = il3945_rates[i].table_rs_idx;
-
- table[idx].rate_n_flags =
- il3945_hw_set_rate_n_flags(il3945_rates[i].plcp, 0);
- table[idx].try_cnt = il->retry_rate;
- prev_idx = il3945_get_prev_ieee_rate(i);
- table[idx].next_rate_idx =
- il3945_rates[prev_idx].table_rs_idx;
- }
-
- switch (il->band) {
- case IEEE80211_BAND_5GHZ:
- D_RATE("Select A mode rate scale\n");
- /* If one of the following CCK rates is used,
- * have it fall back to the 6M OFDM rate */
- for (i = RATE_1M_IDX_TBL;
- i <= RATE_11M_IDX_TBL; i++)
- table[i].next_rate_idx =
- il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
-
- /* Don't fall back to CCK rates */
- table[RATE_12M_IDX_TBL].next_rate_idx =
- RATE_9M_IDX_TBL;
-
- /* Don't drop out of OFDM rates */
- table[RATE_6M_IDX_TBL].next_rate_idx =
- il3945_rates[IL_FIRST_OFDM_RATE].table_rs_idx;
- break;
-
- case IEEE80211_BAND_2GHZ:
- D_RATE("Select B/G mode rate scale\n");
- /* If an OFDM rate is used, have it fall back to the
- * 1M CCK rates */
-
- if (!(il->_3945.sta_supp_rates & IL_OFDM_RATES_MASK) &&
- il_is_associated(il)) {
-
- idx = IL_FIRST_CCK_RATE;
- for (i = RATE_6M_IDX_TBL;
- i <= RATE_54M_IDX_TBL; i++)
- table[i].next_rate_idx =
- il3945_rates[idx].table_rs_idx;
-
- idx = RATE_11M_IDX_TBL;
- /* CCK shouldn't fall back to OFDM... */
- table[idx].next_rate_idx = RATE_5M_IDX_TBL;
- }
- break;
-
- default:
- WARN_ON(1);
- break;
- }
-
- /* Update the rate scaling for control frame Tx */
- rate_cmd.table_id = 0;
- rc = il_send_cmd_pdu(il, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
- if (rc)
- return rc;
-
- /* Update the rate scaling for data frame Tx */
- rate_cmd.table_id = 1;
- return il_send_cmd_pdu(il, REPLY_RATE_SCALE, sizeof(rate_cmd),
- &rate_cmd);
-}
-
-/* Called when initializing driver */
-int il3945_hw_set_hw_params(struct il_priv *il)
-{
- memset((void *)&il->hw_params, 0,
- sizeof(struct il_hw_params));
-
- il->_3945.shared_virt =
- dma_alloc_coherent(&il->pci_dev->dev,
- sizeof(struct il3945_shared),
- &il->_3945.shared_phys, GFP_KERNEL);
- if (!il->_3945.shared_virt) {
- IL_ERR("failed to allocate pci memory\n");
- return -ENOMEM;
- }
-
- /* Assign number of Usable TX queues */
- il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
-
- il->hw_params.tfd_size = sizeof(struct il3945_tfd);
- il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_3K);
- il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
- il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- il->hw_params.max_stations = IL3945_STATION_COUNT;
- il->ctx.bcast_sta_id = IL3945_BROADCAST_ID;
-
- il->sta_key_max_num = STA_KEY_MAX_NUM;
-
- il->hw_params.rx_wrt_ptr_reg = FH39_RSCSR_CHNL0_WPTR;
- il->hw_params.max_beacon_itrvl = IL39_MAX_UCODE_BEACON_INTERVAL;
- il->hw_params.beacon_time_tsf_bits = IL3945_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-unsigned int il3945_hw_get_beacon_cmd(struct il_priv *il,
- struct il3945_frame *frame, u8 rate)
-{
- struct il3945_tx_beacon_cmd *tx_beacon_cmd;
- unsigned int frame_size;
-
- tx_beacon_cmd = (struct il3945_tx_beacon_cmd *)&frame->u;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
- tx_beacon_cmd->tx.sta_id =
- il->ctx.bcast_sta_id;
- tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- frame_size = il3945_fill_beacon_frame(il,
- tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
-
- BUG_ON(frame_size > MAX_MPDU_SIZE);
- tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
-
- tx_beacon_cmd->tx.rate = rate;
- tx_beacon_cmd->tx.tx_flags = (TX_CMD_FLG_SEQ_CTL_MSK |
- TX_CMD_FLG_TSF_MSK);
-
- /* supp_rates[0] == OFDM start at IL_FIRST_OFDM_RATE*/
- tx_beacon_cmd->tx.supp_rates[0] =
- (IL_OFDM_BASIC_RATES_MASK >> IL_FIRST_OFDM_RATE) & 0xFF;
-
- tx_beacon_cmd->tx.supp_rates[1] =
- (IL_CCK_BASIC_RATES_MASK & 0xF);
-
- return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
-}
-
-void il3945_hw_rx_handler_setup(struct il_priv *il)
-{
- il->rx_handlers[REPLY_TX] = il3945_rx_reply_tx;
- il->rx_handlers[REPLY_3945_RX] = il3945_rx_reply_rx;
-}
-
-void il3945_hw_setup_deferred_work(struct il_priv *il)
-{
- INIT_DELAYED_WORK(&il->_3945.thermal_periodic,
- il3945_bg_reg_txpower_periodic);
-}
-
-void il3945_hw_cancel_deferred_work(struct il_priv *il)
-{
- cancel_delayed_work(&il->_3945.thermal_periodic);
-}
-
-/* check contents of special bootstrap uCode SRAM */
-static int il3945_verify_bsm(struct il_priv *il)
- {
- __le32 *image = il->ucode_boot.v_addr;
- u32 len = il->ucode_boot.len;
- u32 reg;
- u32 val;
-
- D_INFO("Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = il_rd_prph(il, reg);
- if (val != le32_to_cpu(*image)) {
- IL_ERR("BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- D_INFO("BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-
-/******************************************************************************
- *
- * EEPROM related functions
- *
- ******************************************************************************/
-
-/*
- * Clear the OWNER_MSK, to establish driver (instead of uCode running on
- * embedded controller) as EEPROM reader; each read is a series of pulses
- * to/from the EEPROM chip, not a single event, so even reads could conflict
- * if they weren't arbitrated by some ownership mechanism. Here, the driver
- * simply claims ownership, which should be safe when this function is called
- * (i.e. before loading uCode!).
- */
-static int il3945_eeprom_acquire_semaphore(struct il_priv *il)
-{
- _il_clear_bit(il, CSR_EEPROM_GP, CSR_EEPROM_GP_IF_OWNER_MSK);
- return 0;
-}
-
-
-static void il3945_eeprom_release_semaphore(struct il_priv *il)
-{
- return;
-}
-
- /**
- * il3945_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int il3945_load_bsm(struct il_priv *il)
-{
- __le32 *image = il->ucode_boot.v_addr;
- u32 len = il->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int rc;
- int i;
- u32 done;
- u32 reg_offset;
-
- D_INFO("Begin load bsm\n");
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IL39_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 31:0 for 3945.
- * NOTE: il3945_initialize_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache. */
- pinst = il->ucode_init.p_addr;
- pdata = il->ucode_init_data.p_addr;
- inst_len = il->ucode_init.len;
- data_len = il->ucode_init_data.len;
-
- il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _il_wr_prph(il, reg_offset,
- le32_to_cpu(*image));
-
- rc = il3945_verify_bsm(il);
- if (rc)
- return rc;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
- il_wr_prph(il, BSM_WR_MEM_DST_REG,
- IL39_RTC_INST_LOWER_BOUND);
- il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- il_wr_prph(il, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = il_rd_prph(il, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- D_INFO("BSM write complete, poll %d iterations\n", i);
- else {
- IL_ERR("BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- il_wr_prph(il, BSM_WR_CTRL_REG,
- BSM_WR_CTRL_REG_BIT_START_EN);
-
- return 0;
-}
-
-static struct il_hcmd_ops il3945_hcmd = {
- .rxon_assoc = il3945_send_rxon_assoc,
- .commit_rxon = il3945_commit_rxon,
-};
-
-static struct il_lib_ops il3945_lib = {
- .txq_attach_buf_to_tfd = il3945_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = il3945_hw_txq_free_tfd,
- .txq_init = il3945_hw_tx_queue_init,
- .load_ucode = il3945_load_bsm,
- .dump_nic_error_log = il3945_dump_nic_error_log,
- .apm_ops = {
- .init = il3945_apm_init,
- .config = il3945_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_REGULATORY_BAND_NO_HT40,
- EEPROM_REGULATORY_BAND_NO_HT40,
- },
- .acquire_semaphore = il3945_eeprom_acquire_semaphore,
- .release_semaphore = il3945_eeprom_release_semaphore,
- },
- .send_tx_power = il3945_send_tx_power,
- .is_valid_rtc_data_addr = il3945_hw_valid_rtc_data_addr,
-
- .debugfs_ops = {
- .rx_stats_read = il3945_ucode_rx_stats_read,
- .tx_stats_read = il3945_ucode_tx_stats_read,
- .general_stats_read = il3945_ucode_general_stats_read,
- },
-};
-
-static const struct il_legacy_ops il3945_legacy_ops = {
- .post_associate = il3945_post_associate,
- .config_ap = il3945_config_ap,
- .manage_ibss_station = il3945_manage_ibss_station,
-};
-
-static struct il_hcmd_utils_ops il3945_hcmd_utils = {
- .get_hcmd_size = il3945_get_hcmd_size,
- .build_addsta_hcmd = il3945_build_addsta_hcmd,
- .request_scan = il3945_request_scan,
- .post_scan = il3945_post_scan,
-};
-
-static const struct il_ops il3945_ops = {
- .lib = &il3945_lib,
- .hcmd = &il3945_hcmd,
- .utils = &il3945_hcmd_utils,
- .led = &il3945_led_ops,
- .legacy = &il3945_legacy_ops,
- .ieee80211_ops = &il3945_hw_ops,
-};
-
-static struct il_base_params il3945_base_params = {
- .eeprom_size = IL3945_EEPROM_IMG_SIZE,
- .num_of_queues = IL39_NUM_QUEUES,
- .pll_cfg_val = CSR39_ANA_PLL_CFG_VAL,
- .set_l0s = false,
- .use_bsm = true,
- .led_compensation = 64,
- .wd_timeout = IL_DEF_WD_TIMEOUT,
-};
-
-static struct il_cfg il3945_bg_cfg = {
- .name = "3945BG",
- .fw_name_pre = IL3945_FW_PRE,
- .ucode_api_max = IL3945_UCODE_API_MAX,
- .ucode_api_min = IL3945_UCODE_API_MIN,
- .sku = IL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &il3945_ops,
- .mod_params = &il3945_mod_params,
- .base_params = &il3945_base_params,
- .led_mode = IL_LED_BLINK,
-};
-
-static struct il_cfg il3945_abg_cfg = {
- .name = "3945ABG",
- .fw_name_pre = IL3945_FW_PRE,
- .ucode_api_max = IL3945_UCODE_API_MAX,
- .ucode_api_min = IL3945_UCODE_API_MIN,
- .sku = IL_SKU_A|IL_SKU_G,
- .eeprom_ver = EEPROM_3945_EEPROM_VERSION,
- .ops = &il3945_ops,
- .mod_params = &il3945_mod_params,
- .base_params = &il3945_base_params,
- .led_mode = IL_LED_BLINK,
-};
-
-DEFINE_PCI_DEVICE_TABLE(il3945_hw_card_ids) = {
- {IL_PCI_DEVICE(0x4222, 0x1005, il3945_bg_cfg)},
- {IL_PCI_DEVICE(0x4222, 0x1034, il3945_bg_cfg)},
- {IL_PCI_DEVICE(0x4222, 0x1044, il3945_bg_cfg)},
- {IL_PCI_DEVICE(0x4227, 0x1014, il3945_bg_cfg)},
- {IL_PCI_DEVICE(0x4222, PCI_ANY_ID, il3945_abg_cfg)},
- {IL_PCI_DEVICE(0x4227, PCI_ANY_ID, il3945_abg_cfg)},
- {0}
-};
-
-MODULE_DEVICE_TABLE(pci, il3945_hw_card_ids);
+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <net/mac80211.h>
-#include <linux/etherdevice.h>
-#include <asm/unaligned.h>
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-4965-calib.h"
-#include "iwl-sta.h"
-#include "iwl-4965-led.h"
-#include "iwl-4965.h"
-#include "iwl-4965-debugfs.h"
-
-static int il4965_send_tx_power(struct il_priv *il);
-static int il4965_hw_get_temperature(struct il_priv *il);
-
-/* Highest firmware API version supported */
-#define IL4965_UCODE_API_MAX 2
-
-/* Lowest firmware API version supported */
-#define IL4965_UCODE_API_MIN 2
-
-#define IL4965_FW_PRE "iwlwifi-4965-"
-#define _IL4965_MODULE_FIRMWARE(api) IL4965_FW_PRE #api ".ucode"
-#define IL4965_MODULE_FIRMWARE(api) _IL4965_MODULE_FIRMWARE(api)
-
-/* check contents of special bootstrap uCode SRAM */
-static int il4965_verify_bsm(struct il_priv *il)
-{
- __le32 *image = il->ucode_boot.v_addr;
- u32 len = il->ucode_boot.len;
- u32 reg;
- u32 val;
-
- D_INFO("Begin verify bsm\n");
-
- /* verify BSM SRAM contents */
- val = il_rd_prph(il, BSM_WR_DWCOUNT_REG);
- for (reg = BSM_SRAM_LOWER_BOUND;
- reg < BSM_SRAM_LOWER_BOUND + len;
- reg += sizeof(u32), image++) {
- val = il_rd_prph(il, reg);
- if (val != le32_to_cpu(*image)) {
- IL_ERR("BSM uCode verification failed at "
- "addr 0x%08X+%u (of %u), is 0x%x, s/b 0x%x\n",
- BSM_SRAM_LOWER_BOUND,
- reg - BSM_SRAM_LOWER_BOUND, len,
- val, le32_to_cpu(*image));
- return -EIO;
- }
- }
-
- D_INFO("BSM bootstrap uCode image OK\n");
-
- return 0;
-}
-
-/**
- * il4965_load_bsm - Load bootstrap instructions
- *
- * BSM operation:
- *
- * The Bootstrap State Machine (BSM) stores a short bootstrap uCode program
- * in special SRAM that does not power down during RFKILL. When powering back
- * up after power-saving sleeps (or during initial uCode load), the BSM loads
- * the bootstrap program into the on-board processor, and starts it.
- *
- * The bootstrap program loads (via DMA) instructions and data for a new
- * program from host DRAM locations indicated by the host driver in the
- * BSM_DRAM_* registers. Once the new program is loaded, it starts
- * automatically.
- *
- * When initializing the NIC, the host driver points the BSM to the
- * "initialize" uCode image. This uCode sets up some internal data, then
- * notifies host via "initialize alive" that it is complete.
- *
- * The host then replaces the BSM_DRAM_* pointer values to point to the
- * normal runtime uCode instructions and a backup uCode data cache buffer
- * (filled initially with starting data values for the on-board processor),
- * then triggers the "initialize" uCode to load and launch the runtime uCode,
- * which begins normal operation.
- *
- * When doing a power-save shutdown, runtime uCode saves data SRAM into
- * the backup data cache in DRAM before SRAM is powered down.
- *
- * When powering back up, the BSM loads the bootstrap program. This reloads
- * the runtime uCode instructions and the backup data cache into SRAM,
- * and re-launches the runtime uCode from where it left off.
- */
-static int il4965_load_bsm(struct il_priv *il)
-{
- __le32 *image = il->ucode_boot.v_addr;
- u32 len = il->ucode_boot.len;
- dma_addr_t pinst;
- dma_addr_t pdata;
- u32 inst_len;
- u32 data_len;
- int i;
- u32 done;
- u32 reg_offset;
- int ret;
-
- D_INFO("Begin load bsm\n");
-
- il->ucode_type = UCODE_RT;
-
- /* make sure bootstrap program is no larger than BSM's SRAM size */
- if (len > IL49_MAX_BSM_SIZE)
- return -EINVAL;
-
- /* Tell bootstrap uCode where to find the "Initialize" uCode
- * in host DRAM ... host DRAM physical address bits 35:4 for 4965.
- * NOTE: il_init_alive_start() will replace these values,
- * after the "initialize" uCode has run, to point to
- * runtime/protocol instructions and backup data cache.
- */
- pinst = il->ucode_init.p_addr >> 4;
- pdata = il->ucode_init_data.p_addr >> 4;
- inst_len = il->ucode_init.len;
- data_len = il->ucode_init_data.len;
-
- il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG, inst_len);
- il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG, data_len);
-
- /* Fill BSM memory with bootstrap instructions */
- for (reg_offset = BSM_SRAM_LOWER_BOUND;
- reg_offset < BSM_SRAM_LOWER_BOUND + len;
- reg_offset += sizeof(u32), image++)
- _il_wr_prph(il, reg_offset, le32_to_cpu(*image));
-
- ret = il4965_verify_bsm(il);
- if (ret)
- return ret;
-
- /* Tell BSM to copy from BSM SRAM into instruction SRAM, when asked */
- il_wr_prph(il, BSM_WR_MEM_SRC_REG, 0x0);
- il_wr_prph(il,
- BSM_WR_MEM_DST_REG, IL49_RTC_INST_LOWER_BOUND);
- il_wr_prph(il, BSM_WR_DWCOUNT_REG, len / sizeof(u32));
-
- /* Load bootstrap code into instruction SRAM now,
- * to prepare to load "initialize" uCode */
- il_wr_prph(il, BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START);
-
- /* Wait for load of bootstrap uCode to finish */
- for (i = 0; i < 100; i++) {
- done = il_rd_prph(il, BSM_WR_CTRL_REG);
- if (!(done & BSM_WR_CTRL_REG_BIT_START))
- break;
- udelay(10);
- }
- if (i < 100)
- D_INFO("BSM write complete, poll %d iterations\n", i);
- else {
- IL_ERR("BSM write did not complete!\n");
- return -EIO;
- }
-
- /* Enable future boot loads whenever power management unit triggers it
- * (e.g. when powering back up after power-save shutdown) */
- il_wr_prph(il,
- BSM_WR_CTRL_REG, BSM_WR_CTRL_REG_BIT_START_EN);
-
-
- return 0;
-}
-
-/**
- * il4965_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int il4965_set_ucode_ptrs(struct il_priv *il)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
- int ret = 0;
-
- /* bits 35:4 for 4965 */
- pinst = il->ucode_code.p_addr >> 4;
- pdata = il->ucode_data_backup.p_addr >> 4;
-
- /* Tell bootstrap uCode where to find image to load */
- il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
- il->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
- il->ucode_code.len | BSM_DRAM_INST_LOAD);
- D_INFO("Runtime uCode pointers are set.\n");
-
- return ret;
-}
-
-/**
- * il4965_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * The 4965 "initialize" ALIVE reply contains calibration data for:
- * Voltage, temperature, and MIMO tx gain correction, now stored in il
- * (3945 does not contain this data).
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
-*/
-static void il4965_init_alive_start(struct il_priv *il)
-{
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (il4965_verify_ucode(il)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- D_INFO("Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Calculate temperature */
- il->temperature = il4965_hw_get_temperature(il);
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- D_INFO("Initialization Alive received.\n");
- if (il4965_set_ucode_ptrs(il)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- D_INFO("Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
-restart:
- queue_work(il->workqueue, &il->restart);
-}
-
-static bool iw4965_is_ht40_channel(__le32 rxon_flags)
-{
- int chan_mod = le32_to_cpu(rxon_flags & RXON_FLG_CHANNEL_MODE_MSK)
- >> RXON_FLG_CHANNEL_MODE_POS;
- return (chan_mod == CHANNEL_MODE_PURE_40 ||
- chan_mod == CHANNEL_MODE_MIXED);
-}
-
-static void il4965_nic_config(struct il_priv *il)
-{
- unsigned long flags;
- u16 radio_cfg;
-
- spin_lock_irqsave(&il->lock, flags);
-
- radio_cfg = il_eeprom_query16(il, EEPROM_RADIO_CONFIG);
-
- /* write radio config values to register */
- if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) == EEPROM_4965_RF_CFG_TYPE_MAX)
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
- EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
- EEPROM_RF_CFG_DASH_MSK(radio_cfg));
-
- /* set CSR_HW_CONFIG_REG for uCode use */
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
- CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
-
- il->calib_info = (struct il_eeprom_calib_info *)
- il_eeprom_query_addr(il,
- EEPROM_4965_CALIB_TXPOWER_OFFSET);
-
- spin_unlock_irqrestore(&il->lock, flags);
-}
-
-/* Reset differential Rx gains in NIC to prepare for chain noise calibration.
- * Called after every association, but this runs only once!
- * ... once chain noise is calibrated the first time, it's good forever. */
-static void il4965_chain_noise_reset(struct il_priv *il)
-{
- struct il_chain_noise_data *data = &(il->chain_noise_data);
-
- if (data->state == IL_CHAIN_NOISE_ALIVE &&
- il_is_any_associated(il)) {
- struct il_calib_diff_gain_cmd cmd;
-
- /* clear data for chain noise calibration algorithm */
- data->chain_noise_a = 0;
- data->chain_noise_b = 0;
- data->chain_noise_c = 0;
- data->chain_signal_a = 0;
- data->chain_signal_b = 0;
- data->chain_signal_c = 0;
- data->beacon_count = 0;
-
- memset(&cmd, 0, sizeof(cmd));
- cmd.hdr.op_code = IL_PHY_CALIBRATE_DIFF_GAIN_CMD;
- cmd.diff_gain_a = 0;
- cmd.diff_gain_b = 0;
- cmd.diff_gain_c = 0;
- if (il_send_cmd_pdu(il, REPLY_PHY_CALIBRATION_CMD,
- sizeof(cmd), &cmd))
- IL_ERR(
- "Could not send REPLY_PHY_CALIBRATION_CMD\n");
- data->state = IL_CHAIN_NOISE_ACCUMULATE;
- D_CALIB("Run chain_noise_calibrate\n");
- }
-}
-
-static struct il_sensitivity_ranges il4965_sensitivity = {
- .min_nrg_cck = 97,
- .max_nrg_cck = 0, /* not used, set to 0 */
-
- .auto_corr_min_ofdm = 85,
- .auto_corr_min_ofdm_mrc = 170,
- .auto_corr_min_ofdm_x1 = 105,
- .auto_corr_min_ofdm_mrc_x1 = 220,
-
- .auto_corr_max_ofdm = 120,
- .auto_corr_max_ofdm_mrc = 210,
- .auto_corr_max_ofdm_x1 = 140,
- .auto_corr_max_ofdm_mrc_x1 = 270,
-
- .auto_corr_min_cck = 125,
- .auto_corr_max_cck = 200,
- .auto_corr_min_cck_mrc = 200,
- .auto_corr_max_cck_mrc = 400,
-
- .nrg_th_cck = 100,
- .nrg_th_ofdm = 100,
-
- .barker_corr_th_min = 190,
- .barker_corr_th_min_mrc = 390,
- .nrg_th_cca = 62,
-};
-
-static void il4965_set_ct_threshold(struct il_priv *il)
-{
- /* want Kelvin */
- il->hw_params.ct_kill_threshold =
- CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD_LEGACY);
-}
-
-/**
- * il4965_hw_set_hw_params
- *
- * Called when initializing driver
- */
-static int il4965_hw_set_hw_params(struct il_priv *il)
-{
- if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
- il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
- il->cfg->base_params->num_of_queues =
- il->cfg->mod_params->num_of_queues;
-
- il->hw_params.max_txq_num = il->cfg->base_params->num_of_queues;
- il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
- il->hw_params.scd_bc_tbls_size =
- il->cfg->base_params->num_of_queues *
- sizeof(struct il4965_scd_bc_tbl);
- il->hw_params.tfd_size = sizeof(struct il_tfd);
- il->hw_params.max_stations = IL4965_STATION_COUNT;
- il->ctx.bcast_sta_id = IL4965_BROADCAST_ID;
- il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
- il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
- il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
- il->hw_params.ht40_channel = BIT(IEEE80211_BAND_5GHZ);
-
- il->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
-
- il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
- il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
- il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
- il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;
-
- il4965_set_ct_threshold(il);
-
- il->hw_params.sens = &il4965_sensitivity;
- il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
-
- return 0;
-}
-
-static s32 il4965_math_div_round(s32 num, s32 denom, s32 *res)
-{
- s32 sign = 1;
-
- if (num < 0) {
- sign = -sign;
- num = -num;
- }
- if (denom < 0) {
- sign = -sign;
- denom = -denom;
- }
- *res = 1;
- *res = ((num * 2 + denom) / (denom * 2)) * sign;
-
- return 1;
-}
-
-/**
- * il4965_get_voltage_compensation - Power supply voltage comp for txpower
- *
- * Determines power supply voltage compensation for txpower calculations.
- * Returns number of 1/2-dB steps to subtract from gain table idx,
- * to compensate for difference between power supply voltage during
- * factory measurements, vs. current power supply voltage.
- *
- * Voltage indication is higher for lower voltage.
- * Lower voltage requires more gain (lower gain table idx).
- */
-static s32 il4965_get_voltage_compensation(s32 eeprom_voltage,
- s32 current_voltage)
-{
- s32 comp = 0;
-
- if (TX_POWER_IL_ILLEGAL_VOLTAGE == eeprom_voltage ||
- TX_POWER_IL_ILLEGAL_VOLTAGE == current_voltage)
- return 0;
-
- il4965_math_div_round(current_voltage - eeprom_voltage,
- TX_POWER_IL_VOLTAGE_CODES_PER_03V, &comp);
-
- if (current_voltage > eeprom_voltage)
- comp *= 2;
- if ((comp < -2) || (comp > 2))
- comp = 0;
-
- return comp;
-}
-
-static s32 il4965_get_tx_atten_grp(u16 channel)
-{
- if (channel >= CALIB_IL_TX_ATTEN_GR5_FCH &&
- channel <= CALIB_IL_TX_ATTEN_GR5_LCH)
- return CALIB_CH_GROUP_5;
-
- if (channel >= CALIB_IL_TX_ATTEN_GR1_FCH &&
- channel <= CALIB_IL_TX_ATTEN_GR1_LCH)
- return CALIB_CH_GROUP_1;
-
- if (channel >= CALIB_IL_TX_ATTEN_GR2_FCH &&
- channel <= CALIB_IL_TX_ATTEN_GR2_LCH)
- return CALIB_CH_GROUP_2;
-
- if (channel >= CALIB_IL_TX_ATTEN_GR3_FCH &&
- channel <= CALIB_IL_TX_ATTEN_GR3_LCH)
- return CALIB_CH_GROUP_3;
-
- if (channel >= CALIB_IL_TX_ATTEN_GR4_FCH &&
- channel <= CALIB_IL_TX_ATTEN_GR4_LCH)
- return CALIB_CH_GROUP_4;
-
- return -EINVAL;
-}
-
-static u32 il4965_get_sub_band(const struct il_priv *il, u32 channel)
-{
- s32 b = -1;
-
- for (b = 0; b < EEPROM_TX_POWER_BANDS; b++) {
- if (il->calib_info->band_info[b].ch_from == 0)
- continue;
-
- if (channel >= il->calib_info->band_info[b].ch_from &&
- channel <= il->calib_info->band_info[b].ch_to)
- break;
- }
-
- return b;
-}
-
-static s32 il4965_interpolate_value(s32 x, s32 x1, s32 y1, s32 x2, s32 y2)
-{
- s32 val;
-
- if (x2 == x1)
- return y1;
- else {
- il4965_math_div_round((x2 - x) * (y1 - y2), (x2 - x1), &val);
- return val + y2;
- }
-}
-
-/**
- * il4965_interpolate_chan - Interpolate factory measurements for one channel
- *
- * Interpolates factory measurements from the two sample channels within a
- * sub-band, to apply to channel of interest. Interpolation is proportional to
- * differences in channel frequencies, which is proportional to differences
- * in channel number.
- */
-static int il4965_interpolate_chan(struct il_priv *il, u32 channel,
- struct il_eeprom_calib_ch_info *chan_info)
-{
- s32 s = -1;
- u32 c;
- u32 m;
- const struct il_eeprom_calib_measure *m1;
- const struct il_eeprom_calib_measure *m2;
- struct il_eeprom_calib_measure *omeas;
- u32 ch_i1;
- u32 ch_i2;
-
- s = il4965_get_sub_band(il, channel);
- if (s >= EEPROM_TX_POWER_BANDS) {
- IL_ERR("Tx Power can not find channel %d\n", channel);
- return -1;
- }
-
- ch_i1 = il->calib_info->band_info[s].ch1.ch_num;
- ch_i2 = il->calib_info->band_info[s].ch2.ch_num;
- chan_info->ch_num = (u8) channel;
-
- D_TXPOWER("channel %d subband %d factory cal ch %d & %d\n",
- channel, s, ch_i1, ch_i2);
-
- for (c = 0; c < EEPROM_TX_POWER_TX_CHAINS; c++) {
- for (m = 0; m < EEPROM_TX_POWER_MEASUREMENTS; m++) {
- m1 = &(il->calib_info->band_info[s].ch1.
- measurements[c][m]);
- m2 = &(il->calib_info->band_info[s].ch2.
- measurements[c][m]);
- omeas = &(chan_info->measurements[c][m]);
-
- omeas->actual_pow =
- (u8) il4965_interpolate_value(channel, ch_i1,
- m1->actual_pow,
- ch_i2,
- m2->actual_pow);
- omeas->gain_idx =
- (u8) il4965_interpolate_value(channel, ch_i1,
- m1->gain_idx, ch_i2,
- m2->gain_idx);
- omeas->temperature =
- (u8) il4965_interpolate_value(channel, ch_i1,
- m1->temperature,
- ch_i2,
- m2->temperature);
- omeas->pa_det =
- (s8) il4965_interpolate_value(channel, ch_i1,
- m1->pa_det, ch_i2,
- m2->pa_det);
-
- D_TXPOWER(
- "chain %d meas %d AP1=%d AP2=%d AP=%d\n", c, m,
- m1->actual_pow, m2->actual_pow, omeas->actual_pow);
- D_TXPOWER(
- "chain %d meas %d NI1=%d NI2=%d NI=%d\n", c, m,
- m1->gain_idx, m2->gain_idx, omeas->gain_idx);
- D_TXPOWER(
- "chain %d meas %d PA1=%d PA2=%d PA=%d\n", c, m,
- m1->pa_det, m2->pa_det, omeas->pa_det);
- D_TXPOWER(
- "chain %d meas %d T1=%d T2=%d T=%d\n", c, m,
- m1->temperature, m2->temperature,
- omeas->temperature);
- }
- }
-
- return 0;
-}
-
-/* bit-rate-dependent table to prevent Tx distortion, in half-dB units,
- * for OFDM 6, 12, 18, 24, 36, 48, 54, 60 MBit, and CCK all rates. */
-static s32 back_off_table[] = {
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 20 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM SISO 40 MHz */
- 10, 10, 10, 10, 10, 15, 17, 20, /* OFDM MIMO 40 MHz */
- 10 /* CCK */
-};
-
-/* Thermal compensation values for txpower for various frequency ranges ...
- * ratios from 3:1 to 4.5:1 of degrees (Celsius) per half-dB gain adjust */
-static struct il4965_txpower_comp_entry {
- s32 degrees_per_05db_a;
- s32 degrees_per_05db_a_denom;
-} tx_power_cmp_tble[CALIB_CH_GROUP_MAX] = {
- {9, 2}, /* group 0 5.2, ch 34-43 */
- {4, 1}, /* group 1 5.2, ch 44-70 */
- {4, 1}, /* group 2 5.2, ch 71-124 */
- {4, 1}, /* group 3 5.2, ch 125-200 */
- {3, 1} /* group 4 2.4, ch all */
-};
-
-static s32 get_min_power_idx(s32 rate_power_idx, u32 band)
-{
- if (!band) {
- if ((rate_power_idx & 7) <= 4)
- return MIN_TX_GAIN_IDX_52GHZ_EXT;
- }
- return MIN_TX_GAIN_IDX;
-}
-
-struct gain_entry {
- u8 dsp;
- u8 radio;
-};
-
-static const struct gain_entry gain_table[2][108] = {
- /* 5.2GHz power gain idx table */
- {
- {123, 0x3F}, /* highest txpower */
- {117, 0x3F},
- {110, 0x3F},
- {104, 0x3F},
- {98, 0x3F},
- {110, 0x3E},
- {104, 0x3E},
- {98, 0x3E},
- {110, 0x3D},
- {104, 0x3D},
- {98, 0x3D},
- {110, 0x3C},
- {104, 0x3C},
- {98, 0x3C},
- {110, 0x3B},
- {104, 0x3B},
- {98, 0x3B},
- {110, 0x3A},
- {104, 0x3A},
- {98, 0x3A},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x25},
- {104, 0x25},
- {98, 0x25},
- {110, 0x24},
- {104, 0x24},
- {98, 0x24},
- {110, 0x23},
- {104, 0x23},
- {98, 0x23},
- {110, 0x22},
- {104, 0x18},
- {98, 0x18},
- {110, 0x17},
- {104, 0x17},
- {98, 0x17},
- {110, 0x16},
- {104, 0x16},
- {98, 0x16},
- {110, 0x15},
- {104, 0x15},
- {98, 0x15},
- {110, 0x14},
- {104, 0x14},
- {98, 0x14},
- {110, 0x13},
- {104, 0x13},
- {98, 0x13},
- {110, 0x12},
- {104, 0x08},
- {98, 0x08},
- {110, 0x07},
- {104, 0x07},
- {98, 0x07},
- {110, 0x06},
- {104, 0x06},
- {98, 0x06},
- {110, 0x05},
- {104, 0x05},
- {98, 0x05},
- {110, 0x04},
- {104, 0x04},
- {98, 0x04},
- {110, 0x03},
- {104, 0x03},
- {98, 0x03},
- {110, 0x02},
- {104, 0x02},
- {98, 0x02},
- {110, 0x01},
- {104, 0x01},
- {98, 0x01},
- {110, 0x00},
- {104, 0x00},
- {98, 0x00},
- {93, 0x00},
- {88, 0x00},
- {83, 0x00},
- {78, 0x00},
- },
- /* 2.4GHz power gain idx table */
- {
- {110, 0x3f}, /* highest txpower */
- {104, 0x3f},
- {98, 0x3f},
- {110, 0x3e},
- {104, 0x3e},
- {98, 0x3e},
- {110, 0x3d},
- {104, 0x3d},
- {98, 0x3d},
- {110, 0x3c},
- {104, 0x3c},
- {98, 0x3c},
- {110, 0x3b},
- {104, 0x3b},
- {98, 0x3b},
- {110, 0x3a},
- {104, 0x3a},
- {98, 0x3a},
- {110, 0x39},
- {104, 0x39},
- {98, 0x39},
- {110, 0x38},
- {104, 0x38},
- {98, 0x38},
- {110, 0x37},
- {104, 0x37},
- {98, 0x37},
- {110, 0x36},
- {104, 0x36},
- {98, 0x36},
- {110, 0x35},
- {104, 0x35},
- {98, 0x35},
- {110, 0x34},
- {104, 0x34},
- {98, 0x34},
- {110, 0x33},
- {104, 0x33},
- {98, 0x33},
- {110, 0x32},
- {104, 0x32},
- {98, 0x32},
- {110, 0x31},
- {104, 0x31},
- {98, 0x31},
- {110, 0x30},
- {104, 0x30},
- {98, 0x30},
- {110, 0x6},
- {104, 0x6},
- {98, 0x6},
- {110, 0x5},
- {104, 0x5},
- {98, 0x5},
- {110, 0x4},
- {104, 0x4},
- {98, 0x4},
- {110, 0x3},
- {104, 0x3},
- {98, 0x3},
- {110, 0x2},
- {104, 0x2},
- {98, 0x2},
- {110, 0x1},
- {104, 0x1},
- {98, 0x1},
- {110, 0x0},
- {104, 0x0},
- {98, 0x0},
- {97, 0},
- {96, 0},
- {95, 0},
- {94, 0},
- {93, 0},
- {92, 0},
- {91, 0},
- {90, 0},
- {89, 0},
- {88, 0},
- {87, 0},
- {86, 0},
- {85, 0},
- {84, 0},
- {83, 0},
- {82, 0},
- {81, 0},
- {80, 0},
- {79, 0},
- {78, 0},
- {77, 0},
- {76, 0},
- {75, 0},
- {74, 0},
- {73, 0},
- {72, 0},
- {71, 0},
- {70, 0},
- {69, 0},
- {68, 0},
- {67, 0},
- {66, 0},
- {65, 0},
- {64, 0},
- {63, 0},
- {62, 0},
- {61, 0},
- {60, 0},
- {59, 0},
- }
-};
-
-static int il4965_fill_txpower_tbl(struct il_priv *il, u8 band, u16 channel,
- u8 is_ht40, u8 ctrl_chan_high,
- struct il4965_tx_power_db *tx_power_tbl)
-{
- u8 saturation_power;
- s32 target_power;
- s32 user_target_power;
- s32 power_limit;
- s32 current_temp;
- s32 reg_limit;
- s32 current_regulatory;
- s32 txatten_grp = CALIB_CH_GROUP_MAX;
- int i;
- int c;
- const struct il_channel_info *ch_info = NULL;
- struct il_eeprom_calib_ch_info ch_eeprom_info;
- const struct il_eeprom_calib_measure *measurement;
- s16 voltage;
- s32 init_voltage;
- s32 voltage_compensation;
- s32 degrees_per_05db_num;
- s32 degrees_per_05db_denom;
- s32 factory_temp;
- s32 temperature_comp[2];
- s32 factory_gain_idx[2];
- s32 factory_actual_pwr[2];
- s32 power_idx;
-
- /* tx_power_user_lmt is in dBm, convert to half-dBm (half-dB units
- * are used for idxing into txpower table) */
- user_target_power = 2 * il->tx_power_user_lmt;
-
- /* Get current (RXON) channel, band, width */
- D_TXPOWER("chan %d band %d is_ht40 %d\n", channel, band,
- is_ht40);
-
- ch_info = il_get_channel_info(il, il->band, channel);
-
- if (!il_is_channel_valid(ch_info))
- return -EINVAL;
-
- /* get txatten group, used to select 1) thermal txpower adjustment
- * and 2) mimo txpower balance between Tx chains. */
- txatten_grp = il4965_get_tx_atten_grp(channel);
- if (txatten_grp < 0) {
- IL_ERR("Can't find txatten group for channel %d.\n",
- channel);
- return txatten_grp;
- }
-
- D_TXPOWER("channel %d belongs to txatten group %d\n",
- channel, txatten_grp);
-
- if (is_ht40) {
- if (ctrl_chan_high)
- channel -= 2;
- else
- channel += 2;
- }
-
- /* hardware txpower limits ...
- * saturation (clipping distortion) txpowers are in half-dBm */
- if (band)
- saturation_power = il->calib_info->saturation_power24;
- else
- saturation_power = il->calib_info->saturation_power52;
-
- if (saturation_power < IL_TX_POWER_SATURATION_MIN ||
- saturation_power > IL_TX_POWER_SATURATION_MAX) {
- if (band)
- saturation_power = IL_TX_POWER_DEFAULT_SATURATION_24;
- else
- saturation_power = IL_TX_POWER_DEFAULT_SATURATION_52;
- }
-
- /* regulatory txpower limits ... reg_limit values are in half-dBm,
- * max_power_avg values are in dBm, convert * 2 */
- if (is_ht40)
- reg_limit = ch_info->ht40_max_power_avg * 2;
- else
- reg_limit = ch_info->max_power_avg * 2;
-
- if ((reg_limit < IL_TX_POWER_REGULATORY_MIN) ||
- (reg_limit > IL_TX_POWER_REGULATORY_MAX)) {
- if (band)
- reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_24;
- else
- reg_limit = IL_TX_POWER_DEFAULT_REGULATORY_52;
- }
-
- /* Interpolate txpower calibration values for this channel,
- * based on factory calibration tests on spaced channels. */
- il4965_interpolate_chan(il, channel, &ch_eeprom_info);
-
- /* calculate tx gain adjustment based on power supply voltage */
- voltage = le16_to_cpu(il->calib_info->voltage);
- init_voltage = (s32)le32_to_cpu(il->card_alive_init.voltage);
- voltage_compensation =
- il4965_get_voltage_compensation(voltage, init_voltage);
-
- D_TXPOWER("curr volt %d eeprom volt %d volt comp %d\n",
- init_voltage,
- voltage, voltage_compensation);
-
- /* get current temperature (Celsius) */
- current_temp = max(il->temperature, IL_TX_POWER_TEMPERATURE_MIN);
- current_temp = min(il->temperature, IL_TX_POWER_TEMPERATURE_MAX);
- current_temp = KELVIN_TO_CELSIUS(current_temp);
-
- /* select thermal txpower adjustment params, based on channel group
- * (same frequency group used for mimo txatten adjustment) */
- degrees_per_05db_num =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a;
- degrees_per_05db_denom =
- tx_power_cmp_tble[txatten_grp].degrees_per_05db_a_denom;
-
- /* get per-chain txpower values from factory measurements */
- for (c = 0; c < 2; c++) {
- measurement = &ch_eeprom_info.measurements[c][1];
-
- /* txgain adjustment (in half-dB steps) based on difference
- * between factory and current temperature */
- factory_temp = measurement->temperature;
- il4965_math_div_round((current_temp - factory_temp) *
- degrees_per_05db_denom,
- degrees_per_05db_num,
- &temperature_comp[c]);
-
- factory_gain_idx[c] = measurement->gain_idx;
- factory_actual_pwr[c] = measurement->actual_pow;
-
- D_TXPOWER("chain = %d\n", c);
- D_TXPOWER("fctry tmp %d, "
- "curr tmp %d, comp %d steps\n",
- factory_temp, current_temp,
- temperature_comp[c]);
-
- D_TXPOWER("fctry idx %d, fctry pwr %d\n",
- factory_gain_idx[c],
- factory_actual_pwr[c]);
- }
-
- /* for each of 33 bit-rates (including 1 for CCK) */
- for (i = 0; i < POWER_TBL_NUM_ENTRIES; i++) {
- u8 is_mimo_rate;
- union il4965_tx_power_dual_stream tx_power;
-
- /* for mimo, reduce each chain's txpower by half
- * (3dB, 6 steps), so total output power is regulatory
- * compliant. */
- if (i & 0x8) {
- current_regulatory = reg_limit -
- IL_TX_POWER_MIMO_REGULATORY_COMPENSATION;
- is_mimo_rate = 1;
- } else {
- current_regulatory = reg_limit;
- is_mimo_rate = 0;
- }
-
- /* find txpower limit, either hardware or regulatory */
- power_limit = saturation_power - back_off_table[i];
- if (power_limit > current_regulatory)
- power_limit = current_regulatory;
-
- /* reduce user's txpower request if necessary
- * for this rate on this channel */
- target_power = user_target_power;
- if (target_power > power_limit)
- target_power = power_limit;
-
- D_TXPOWER("rate %d sat %d reg %d usr %d tgt %d\n",
- i, saturation_power - back_off_table[i],
- current_regulatory, user_target_power,
- target_power);
-
- /* for each of 2 Tx chains (radio transmitters) */
- for (c = 0; c < 2; c++) {
- s32 atten_value;
-
- if (is_mimo_rate)
- atten_value =
- (s32)le32_to_cpu(il->card_alive_init.
- tx_atten[txatten_grp][c]);
- else
- atten_value = 0;
-
- /* calculate idx; higher idx means lower txpower */
- power_idx = (u8) (factory_gain_idx[c] -
- (target_power -
- factory_actual_pwr[c]) -
- temperature_comp[c] -
- voltage_compensation +
- atten_value);
-
-/* D_TXPOWER("calculated txpower idx %d\n",
- power_idx); */
-
- if (power_idx < get_min_power_idx(i, band))
- power_idx = get_min_power_idx(i, band);
-
- /* adjust 5 GHz idx to support negative idxes */
- if (!band)
- power_idx += 9;
-
- /* CCK, rate 32, reduce txpower for CCK */
- if (i == POWER_TBL_CCK_ENTRY)
- power_idx +=
- IL_TX_POWER_CCK_COMPENSATION_C_STEP;
-
- /* stay within the table! */
- if (power_idx > 107) {
- IL_WARN("txpower idx %d > 107\n",
- power_idx);
- power_idx = 107;
- }
- if (power_idx < 0) {
- IL_WARN("txpower idx %d < 0\n",
- power_idx);
- power_idx = 0;
- }
-
- /* fill txpower command for this rate/chain */
- tx_power.s.radio_tx_gain[c] =
- gain_table[band][power_idx].radio;
- tx_power.s.dsp_predis_atten[c] =
- gain_table[band][power_idx].dsp;
-
- D_TXPOWER("chain %d mimo %d idx %d "
- "gain 0x%02x dsp %d\n",
- c, atten_value, power_idx,
- tx_power.s.radio_tx_gain[c],
- tx_power.s.dsp_predis_atten[c]);
- } /* for each chain */
-
- tx_power_tbl->power_tbl[i].dw = cpu_to_le32(tx_power.dw);
-
- } /* for each rate */
-
- return 0;
-}
-
-/**
- * il4965_send_tx_power - Configure the TXPOWER level user limit
- *
- * Uses the active RXON for channel, band, and characteristics (ht40, high)
- * The power limit is taken from il->tx_power_user_lmt.
- */
-static int il4965_send_tx_power(struct il_priv *il)
-{
- struct il4965_txpowertable_cmd cmd = { 0 };
- int ret;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct il_rxon_context *ctx = &il->ctx;
-
- if (WARN_ONCE(test_bit(STATUS_SCAN_HW, &il->status),
- "TX Power requested while scanning!\n"))
- return -EAGAIN;
-
- band = il->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = iw4965_is_ht40_channel(ctx->active.flags);
-
- if (is_ht40 && (ctx->active.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.channel = ctx->active.channel;
-
- ret = il4965_fill_txpower_tbl(il, band,
- le16_to_cpu(ctx->active.channel),
- is_ht40, ctrl_chan_high, &cmd.tx_power);
- if (ret)
- goto out;
-
- ret = il_send_cmd_pdu(il,
- REPLY_TX_PWR_TBL_CMD, sizeof(cmd), &cmd);
-
-out:
- return ret;
-}
-
-static int il4965_send_rxon_assoc(struct il_priv *il,
- struct il_rxon_context *ctx)
-{
- int ret = 0;
- struct il4965_rxon_assoc_cmd rxon_assoc;
- const struct il_rxon_cmd *rxon1 = &ctx->staging;
- const struct il_rxon_cmd *rxon2 = &ctx->active;
-
- if (rxon1->flags == rxon2->flags &&
- rxon1->filter_flags == rxon2->filter_flags &&
- rxon1->cck_basic_rates == rxon2->cck_basic_rates &&
- rxon1->ofdm_ht_single_stream_basic_rates ==
- rxon2->ofdm_ht_single_stream_basic_rates &&
- rxon1->ofdm_ht_dual_stream_basic_rates ==
- rxon2->ofdm_ht_dual_stream_basic_rates &&
- rxon1->rx_chain == rxon2->rx_chain &&
- rxon1->ofdm_basic_rates == rxon2->ofdm_basic_rates) {
- D_INFO("Using current RXON_ASSOC. Not resending.\n");
- return 0;
- }
-
- rxon_assoc.flags = ctx->staging.flags;
- rxon_assoc.filter_flags = ctx->staging.filter_flags;
- rxon_assoc.ofdm_basic_rates = ctx->staging.ofdm_basic_rates;
- rxon_assoc.cck_basic_rates = ctx->staging.cck_basic_rates;
- rxon_assoc.reserved = 0;
- rxon_assoc.ofdm_ht_single_stream_basic_rates =
- ctx->staging.ofdm_ht_single_stream_basic_rates;
- rxon_assoc.ofdm_ht_dual_stream_basic_rates =
- ctx->staging.ofdm_ht_dual_stream_basic_rates;
- rxon_assoc.rx_chain_select_flags = ctx->staging.rx_chain;
-
- ret = il_send_cmd_pdu_async(il, REPLY_RXON_ASSOC,
- sizeof(rxon_assoc), &rxon_assoc, NULL);
-
- return ret;
-}
-
-static int il4965_commit_rxon(struct il_priv *il, struct il_rxon_context *ctx)
-{
- /* cast away the const for active_rxon in this function */
- struct il_rxon_cmd *active_rxon = (void *)&ctx->active;
- int ret;
- bool new_assoc =
- !!(ctx->staging.filter_flags & RXON_FILTER_ASSOC_MSK);
-
- if (!il_is_alive(il))
- return -EBUSY;
-
- if (!ctx->is_active)
- return 0;
-
- /* always get timestamp with Rx frame */
- ctx->staging.flags |= RXON_FLG_TSF2HOST_MSK;
-
- ret = il_check_rxon_cmd(il, ctx);
- if (ret) {
- IL_ERR("Invalid RXON configuration. Not committing.\n");
- return -EINVAL;
- }
-
- /*
- * receive commit_rxon request
- * abort any previous channel switch if still in process
- */
- if (test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status) &&
- il->switch_channel != ctx->staging.channel) {
- D_11H("abort channel switch on %d\n",
- le16_to_cpu(il->switch_channel));
- il_chswitch_done(il, false);
- }
-
- /* If we don't need to send a full RXON, we can use
- * il_rxon_assoc_cmd which is used to reconfigure filter
- * and other flags for the current radio configuration. */
- if (!il_full_rxon_required(il, ctx)) {
- ret = il_send_rxon_assoc(il, ctx);
- if (ret) {
- IL_ERR("Error setting RXON_ASSOC (%d)\n", ret);
- return ret;
- }
-
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- il_print_rx_config_cmd(il, ctx);
- /*
- * We do not commit tx power settings while channel changing,
- * do it now if tx power changed.
- */
- il_set_tx_power(il, il->tx_power_next, false);
- return 0;
- }
-
- /* If we are currently associated and the new config requires
- * an RXON_ASSOC and the new config wants the associated mask enabled,
- * we must clear the associated from the active configuration
- * before we apply the new config */
- if (il_is_associated_ctx(ctx) && new_assoc) {
- D_INFO("Toggling associated bit on current RXON\n");
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
-
- ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
- sizeof(struct il_rxon_cmd),
- active_rxon);
-
- /* If the mask clearing failed then we set
- * active_rxon back to what it was previously */
- if (ret) {
- active_rxon->filter_flags |= RXON_FILTER_ASSOC_MSK;
- IL_ERR("Error clearing ASSOC_MSK (%d)\n", ret);
- return ret;
- }
- il_clear_ucode_stations(il, ctx);
- il_restore_stations(il, ctx);
- ret = il4965_restore_default_wep_keys(il, ctx);
- if (ret) {
- IL_ERR("Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
-
- D_INFO("Sending RXON\n"
- "* with%s RXON_FILTER_ASSOC_MSK\n"
- "* channel = %d\n"
- "* bssid = %pM\n",
- (new_assoc ? "" : "out"),
- le16_to_cpu(ctx->staging.channel),
- ctx->staging.bssid_addr);
-
- il_set_rxon_hwcrypto(il, ctx,
- !il->cfg->mod_params->sw_crypto);
-
- /* Apply the new configuration
- * RXON unassoc clears the station table in uCode so restoration of
- * stations is needed after it (the RXON command) completes
- */
- if (!new_assoc) {
- ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
- sizeof(struct il_rxon_cmd), &ctx->staging);
- if (ret) {
- IL_ERR("Error setting new RXON (%d)\n", ret);
- return ret;
- }
- D_INFO("Return from !new_assoc RXON.\n");
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- il_clear_ucode_stations(il, ctx);
- il_restore_stations(il, ctx);
- ret = il4965_restore_default_wep_keys(il, ctx);
- if (ret) {
- IL_ERR("Failed to restore WEP keys (%d)\n", ret);
- return ret;
- }
- }
- if (new_assoc) {
- il->start_calib = 0;
- /* Apply the new configuration
- * RXON assoc doesn't clear the station table in uCode,
- */
- ret = il_send_cmd_pdu(il, ctx->rxon_cmd,
- sizeof(struct il_rxon_cmd), &ctx->staging);
- if (ret) {
- IL_ERR("Error setting new RXON (%d)\n", ret);
- return ret;
- }
- memcpy(active_rxon, &ctx->staging, sizeof(*active_rxon));
- }
- il_print_rx_config_cmd(il, ctx);
-
- il4965_init_sensitivity(il);
-
- /* If we issue a new RXON command which required a tune then we must
- * send a new TXPOWER command or we won't be able to Tx any frames */
- ret = il_set_tx_power(il, il->tx_power_next, true);
- if (ret) {
- IL_ERR("Error sending TX power (%d)\n", ret);
- return ret;
- }
-
- return 0;
-}
-
-static int il4965_hw_channel_switch(struct il_priv *il,
- struct ieee80211_channel_switch *ch_switch)
-{
- struct il_rxon_context *ctx = &il->ctx;
- int rc;
- u8 band = 0;
- bool is_ht40 = false;
- u8 ctrl_chan_high = 0;
- struct il4965_channel_switch_cmd cmd;
- const struct il_channel_info *ch_info;
- u32 switch_time_in_usec, ucode_switch_time;
- u16 ch;
- u32 tsf_low;
- u8 switch_count;
- u16 beacon_interval = le16_to_cpu(ctx->timing.beacon_interval);
- struct ieee80211_vif *vif = ctx->vif;
- band = il->band == IEEE80211_BAND_2GHZ;
-
- is_ht40 = iw4965_is_ht40_channel(ctx->staging.flags);
-
- if (is_ht40 &&
- (ctx->staging.flags & RXON_FLG_CTRL_CHANNEL_LOC_HI_MSK))
- ctrl_chan_high = 1;
-
- cmd.band = band;
- cmd.expect_beacon = 0;
- ch = ch_switch->channel->hw_value;
- cmd.channel = cpu_to_le16(ch);
- cmd.rxon_flags = ctx->staging.flags;
- cmd.rxon_filter_flags = ctx->staging.filter_flags;
- switch_count = ch_switch->count;
- tsf_low = ch_switch->timestamp & 0x0ffffffff;
- /*
- * calculate the ucode channel switch time
- * adding TSF as one of the factor for when to switch
- */
- if (il->ucode_beacon_time > tsf_low && beacon_interval) {
- if (switch_count > ((il->ucode_beacon_time - tsf_low) /
- beacon_interval)) {
- switch_count -= (il->ucode_beacon_time -
- tsf_low) / beacon_interval;
- } else
- switch_count = 0;
- }
- if (switch_count <= 1)
- cmd.switch_time = cpu_to_le32(il->ucode_beacon_time);
- else {
- switch_time_in_usec =
- vif->bss_conf.beacon_int * switch_count * TIME_UNIT;
- ucode_switch_time = il_usecs_to_beacons(il,
- switch_time_in_usec,
- beacon_interval);
- cmd.switch_time = il_add_beacon_time(il,
- il->ucode_beacon_time,
- ucode_switch_time,
- beacon_interval);
- }
- D_11H("uCode time for the switch is 0x%x\n",
- cmd.switch_time);
- ch_info = il_get_channel_info(il, il->band, ch);
- if (ch_info)
- cmd.expect_beacon = il_is_channel_radar(ch_info);
- else {
- IL_ERR("invalid channel switch from %u to %u\n",
- ctx->active.channel, ch);
- return -EFAULT;
- }
-
- rc = il4965_fill_txpower_tbl(il, band, ch, is_ht40,
- ctrl_chan_high, &cmd.tx_power);
- if (rc) {
- D_11H("error:%d fill txpower_tbl\n", rc);
- return rc;
- }
-
- return il_send_cmd_pdu(il,
- REPLY_CHANNEL_SWITCH, sizeof(cmd), &cmd);
-}
-
-/**
- * il4965_txq_update_byte_cnt_tbl - Set up entry in Tx byte-count array
- */
-static void il4965_txq_update_byte_cnt_tbl(struct il_priv *il,
- struct il_tx_queue *txq,
- u16 byte_cnt)
-{
- struct il4965_scd_bc_tbl *scd_bc_tbl = il->scd_bc_tbls.addr;
- int txq_id = txq->q.id;
- int write_ptr = txq->q.write_ptr;
- int len = byte_cnt + IL_TX_CRC_SIZE + IL_TX_DELIMITER_SIZE;
- __le16 bc_ent;
-
- WARN_ON(len > 0xFFF || write_ptr >= TFD_QUEUE_SIZE_MAX);
-
- bc_ent = cpu_to_le16(len & 0xFFF);
- /* Set up byte count within first 256 entries */
- scd_bc_tbl[txq_id].tfd_offset[write_ptr] = bc_ent;
-
- /* If within first 64 entries, duplicate at end */
- if (write_ptr < TFD_QUEUE_SIZE_BC_DUP)
- scd_bc_tbl[txq_id].
- tfd_offset[TFD_QUEUE_SIZE_MAX + write_ptr] = bc_ent;
-}
-
-/**
- * il4965_hw_get_temperature - return the calibrated temperature (in Kelvin)
- * @stats: Provides the temperature reading from the uCode
- *
- * A return of <0 indicates bogus data in the stats
- */
-static int il4965_hw_get_temperature(struct il_priv *il)
-{
- s32 temperature;
- s32 vt;
- s32 R1, R2, R3;
- u32 R4;
-
- if (test_bit(STATUS_TEMPERATURE, &il->status) &&
- (il->_4965.stats.flag &
- STATISTICS_REPLY_FLG_HT40_MODE_MSK)) {
- D_TEMP("Running HT40 temperature calibration\n");
- R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[1]);
- R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[1]);
- R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[1]);
- R4 = le32_to_cpu(il->card_alive_init.therm_r4[1]);
- } else {
- D_TEMP("Running temperature calibration\n");
- R1 = (s32)le32_to_cpu(il->card_alive_init.therm_r1[0]);
- R2 = (s32)le32_to_cpu(il->card_alive_init.therm_r2[0]);
- R3 = (s32)le32_to_cpu(il->card_alive_init.therm_r3[0]);
- R4 = le32_to_cpu(il->card_alive_init.therm_r4[0]);
- }
-
- /*
- * Temperature is only 23 bits, so sign extend out to 32.
- *
- * NOTE If we haven't received a stats notification yet
- * with an updated temperature, use R4 provided to us in the
- * "initialize" ALIVE response.
- */
- if (!test_bit(STATUS_TEMPERATURE, &il->status))
- vt = sign_extend32(R4, 23);
- else
- vt = sign_extend32(le32_to_cpu(il->_4965.stats.
- general.common.temperature), 23);
-
- D_TEMP("Calib values R[1-3]: %d %d %d R4: %d\n", R1, R2, R3, vt);
-
- if (R3 == R1) {
- IL_ERR("Calibration conflict R1 == R3\n");
- return -1;
- }
-
- /* Calculate temperature in degrees Kelvin, adjust by 97%.
- * Add offset to center the adjustment around 0 degrees Centigrade. */
- temperature = TEMPERATURE_CALIB_A_VAL * (vt - R2);
- temperature /= (R3 - R1);
- temperature = (temperature * 97) / 100 + TEMPERATURE_CALIB_KELVIN_OFFSET;
-
- D_TEMP("Calibrated temperature: %dK, %dC\n",
- temperature, KELVIN_TO_CELSIUS(temperature));
-
- return temperature;
-}
-
-/* Adjust Txpower only if temperature variance is greater than threshold. */
-#define IL_TEMPERATURE_THRESHOLD 3
-
-/**
- * il4965_is_temp_calib_needed - determines if new calibration is needed
- *
- * If the temperature changed has changed sufficiently, then a recalibration
- * is needed.
- *
- * Assumes caller will replace il->last_temperature once calibration
- * executed.
- */
-static int il4965_is_temp_calib_needed(struct il_priv *il)
-{
- int temp_diff;
-
- if (!test_bit(STATUS_STATISTICS, &il->status)) {
- D_TEMP("Temperature not updated -- no stats.\n");
- return 0;
- }
-
- temp_diff = il->temperature - il->last_temperature;
-
- /* get absolute value */
- if (temp_diff < 0) {
- D_POWER("Getting cooler, delta %d\n", temp_diff);
- temp_diff = -temp_diff;
- } else if (temp_diff == 0)
- D_POWER("Temperature unchanged\n");
- else
- D_POWER("Getting warmer, delta %d\n", temp_diff);
-
- if (temp_diff < IL_TEMPERATURE_THRESHOLD) {
- D_POWER(" => thermal txpower calib not needed\n");
- return 0;
- }
-
- D_POWER(" => thermal txpower calib needed\n");
-
- return 1;
-}
-
-static void il4965_temperature_calib(struct il_priv *il)
-{
- s32 temp;
-
- temp = il4965_hw_get_temperature(il);
- if (IL_TX_POWER_TEMPERATURE_OUT_OF_RANGE(temp))
- return;
-
- if (il->temperature != temp) {
- if (il->temperature)
- D_TEMP("Temperature changed "
- "from %dC to %dC\n",
- KELVIN_TO_CELSIUS(il->temperature),
- KELVIN_TO_CELSIUS(temp));
- else
- D_TEMP("Temperature "
- "initialized to %dC\n",
- KELVIN_TO_CELSIUS(temp));
- }
-
- il->temperature = temp;
- set_bit(STATUS_TEMPERATURE, &il->status);
-
- if (!il->disable_tx_power_cal &&
- unlikely(!test_bit(STATUS_SCANNING, &il->status)) &&
- il4965_is_temp_calib_needed(il))
- queue_work(il->workqueue, &il->txpower_work);
-}
-
-static u16 il4965_get_hcmd_size(u8 cmd_id, u16 len)
-{
- switch (cmd_id) {
- case REPLY_RXON:
- return (u16) sizeof(struct il4965_rxon_cmd);
- default:
- return len;
- }
-}
-
-static u16 il4965_build_addsta_hcmd(const struct il_addsta_cmd *cmd,
- u8 *data)
-{
- struct il4965_addsta_cmd *addsta = (struct il4965_addsta_cmd *)data;
- addsta->mode = cmd->mode;
- memcpy(&addsta->sta, &cmd->sta, sizeof(struct sta_id_modify));
- memcpy(&addsta->key, &cmd->key, sizeof(struct il4965_keyinfo));
- addsta->station_flags = cmd->station_flags;
- addsta->station_flags_msk = cmd->station_flags_msk;
- addsta->tid_disable_tx = cmd->tid_disable_tx;
- addsta->add_immediate_ba_tid = cmd->add_immediate_ba_tid;
- addsta->remove_immediate_ba_tid = cmd->remove_immediate_ba_tid;
- addsta->add_immediate_ba_ssn = cmd->add_immediate_ba_ssn;
- addsta->sleep_tx_count = cmd->sleep_tx_count;
- addsta->reserved1 = cpu_to_le16(0);
- addsta->reserved2 = cpu_to_le16(0);
-
- return (u16)sizeof(struct il4965_addsta_cmd);
-}
-
-static inline u32 il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
-{
- return le32_to_cpup(&tx_resp->u.status + tx_resp->frame_count) & MAX_SN;
-}
-
-/**
- * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
- */
-static int il4965_tx_status_reply_tx(struct il_priv *il,
- struct il_ht_agg *agg,
- struct il4965_tx_resp *tx_resp,
- int txq_id, u16 start_idx)
-{
- u16 status;
- struct agg_tx_status *frame_status = tx_resp->u.agg_status;
- struct ieee80211_tx_info *info = NULL;
- struct ieee80211_hdr *hdr = NULL;
- u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
- int i, sh, idx;
- u16 seq;
- if (agg->wait_for_ba)
- D_TX_REPLY("got tx response w/o block-ack\n");
-
- agg->frame_count = tx_resp->frame_count;
- agg->start_idx = start_idx;
- agg->rate_n_flags = rate_n_flags;
- agg->bitmap = 0;
-
- /* num frames attempted by Tx command */
- if (agg->frame_count == 1) {
- /* Only one frame was attempted; no block-ack will arrive */
- status = le16_to_cpu(frame_status[0].status);
- idx = start_idx;
-
- D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
- agg->frame_count, agg->start_idx, idx);
-
- info = IEEE80211_SKB_CB(il->txq[txq_id].txb[idx].skb);
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags &= ~IEEE80211_TX_CTL_AMPDU;
- info->flags |= il4965_tx_status_to_mac80211(status);
- il4965_hwrate_to_tx_control(il, rate_n_flags, info);
-
- D_TX_REPLY("1 Frame 0x%x failure :%d\n",
- status & 0xff, tx_resp->failure_frame);
- D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);
-
- agg->wait_for_ba = 0;
- } else {
- /* Two or more frames were attempted; expect block-ack */
- u64 bitmap = 0;
- int start = agg->start_idx;
-
- /* Construct bit-map of pending frames within Tx win */
- for (i = 0; i < agg->frame_count; i++) {
- u16 sc;
- status = le16_to_cpu(frame_status[i].status);
- seq = le16_to_cpu(frame_status[i].sequence);
- idx = SEQ_TO_IDX(seq);
- txq_id = SEQ_TO_QUEUE(seq);
-
- if (status & (AGG_TX_STATE_FEW_BYTES_MSK |
- AGG_TX_STATE_ABORT_MSK))
- continue;
-
- D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
- agg->frame_count, txq_id, idx);
-
- hdr = il_tx_queue_get_hdr(il, txq_id, idx);
- if (!hdr) {
- IL_ERR(
- "BUG_ON idx doesn't point to valid skb"
- " idx=%d, txq_id=%d\n", idx, txq_id);
- return -1;
- }
-
- sc = le16_to_cpu(hdr->seq_ctrl);
- if (idx != (SEQ_TO_SN(sc) & 0xff)) {
- IL_ERR(
- "BUG_ON idx doesn't match seq control"
- " idx=%d, seq_idx=%d, seq=%d\n",
- idx, SEQ_TO_SN(sc), hdr->seq_ctrl);
- return -1;
- }
-
- D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n",
- i, idx, SEQ_TO_SN(sc));
-
- sh = idx - start;
- if (sh > 64) {
- sh = (start - idx) + 0xff;
- bitmap = bitmap << sh;
- sh = 0;
- start = idx;
- } else if (sh < -64)
- sh = 0xff - (start - idx);
- else if (sh < 0) {
- sh = start - idx;
- start = idx;
- bitmap = bitmap << sh;
- sh = 0;
- }
- bitmap |= 1ULL << sh;
- D_TX_REPLY("start=%d bitmap=0x%llx\n",
- start, (unsigned long long)bitmap);
- }
-
- agg->bitmap = bitmap;
- agg->start_idx = start;
- D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
- agg->frame_count, agg->start_idx,
- (unsigned long long)agg->bitmap);
-
- if (bitmap)
- agg->wait_for_ba = 1;
- }
- return 0;
-}
-
-static u8 il4965_find_station(struct il_priv *il, const u8 *addr)
-{
- int i;
- int start = 0;
- int ret = IL_INVALID_STATION;
- unsigned long flags;
-
- if ((il->iw_mode == NL80211_IFTYPE_ADHOC))
- start = IL_STA_ID;
-
- if (is_broadcast_ether_addr(addr))
- return il->ctx.bcast_sta_id;
-
- spin_lock_irqsave(&il->sta_lock, flags);
- for (i = start; i < il->hw_params.max_stations; i++)
- if (il->stations[i].used &&
- (!compare_ether_addr(il->stations[i].sta.sta.addr,
- addr))) {
- ret = i;
- goto out;
- }
-
- D_ASSOC("can not find STA %pM total %d\n",
- addr, il->num_stations);
-
- out:
- /*
- * It may be possible that more commands interacting with stations
- * arrive before we completed processing the adding of
- * station
- */
- if (ret != IL_INVALID_STATION &&
- (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
- ((il->stations[ret].used & IL_STA_UCODE_ACTIVE) &&
- (il->stations[ret].used & IL_STA_UCODE_INPROGRESS)))) {
- IL_ERR("Requested station info for sta %d before ready.\n",
- ret);
- ret = IL_INVALID_STATION;
- }
- spin_unlock_irqrestore(&il->sta_lock, flags);
- return ret;
-}
-
-static int il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
-{
- if (il->iw_mode == NL80211_IFTYPE_STATION) {
- return IL_AP_ID;
- } else {
- u8 *da = ieee80211_get_DA(hdr);
- return il4965_find_station(il, da);
- }
-}
-
-/**
- * il4965_rx_reply_tx - Handle standard (non-aggregation) Tx response
- */
-static void il4965_rx_reply_tx(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- u16 sequence = le16_to_cpu(pkt->hdr.sequence);
- int txq_id = SEQ_TO_QUEUE(sequence);
- int idx = SEQ_TO_IDX(sequence);
- struct il_tx_queue *txq = &il->txq[txq_id];
- struct ieee80211_hdr *hdr;
- struct ieee80211_tx_info *info;
- struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
- u32 status = le32_to_cpu(tx_resp->u.status);
- int uninitialized_var(tid);
- int sta_id;
- int freed;
- u8 *qc = NULL;
- unsigned long flags;
-
- if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
- IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
- "is out of range [0-%d] %d %d\n", txq_id,
- idx, txq->q.n_bd, txq->q.write_ptr,
- txq->q.read_ptr);
- return;
- }
-
- txq->time_stamp = jiffies;
- info = IEEE80211_SKB_CB(txq->txb[txq->q.read_ptr].skb);
- memset(&info->status, 0, sizeof(info->status));
-
- hdr = il_tx_queue_get_hdr(il, txq_id, idx);
- if (ieee80211_is_data_qos(hdr->frame_control)) {
- qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & 0xf;
- }
-
- sta_id = il4965_get_ra_sta_id(il, hdr);
- if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
- IL_ERR("Station not known\n");
- return;
- }
-
- spin_lock_irqsave(&il->sta_lock, flags);
- if (txq->sched_retry) {
- const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
- struct il_ht_agg *agg = NULL;
- WARN_ON(!qc);
-
- agg = &il->stations[sta_id].tid[tid].agg;
-
- il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);
-
- /* check if BAR is needed */
- if ((tx_resp->frame_count == 1) && !il4965_is_tx_success(status))
- info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;
-
- if (txq->q.read_ptr != (scd_ssn & 0xff)) {
- idx = il_queue_dec_wrap(scd_ssn & 0xff,
- txq->q.n_bd);
- D_TX_REPLY("Retry scheduler reclaim scd_ssn "
- "%d idx %d\n", scd_ssn , idx);
- freed = il4965_tx_queue_reclaim(il, txq_id, idx);
- if (qc)
- il4965_free_tfds_in_queue(il, sta_id,
- tid, freed);
-
- if (il->mac80211_registered &&
- il_queue_space(&txq->q) > txq->q.low_mark &&
- agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
- il_wake_queue(il, txq);
- }
- } else {
- info->status.rates[0].count = tx_resp->failure_frame + 1;
- info->flags |= il4965_tx_status_to_mac80211(status);
- il4965_hwrate_to_tx_control(il,
- le32_to_cpu(tx_resp->rate_n_flags),
- info);
-
- D_TX_REPLY("TXQ %d status %s (0x%08x) "
- "rate_n_flags 0x%x retries %d\n",
- txq_id,
- il4965_get_tx_fail_reason(status), status,
- le32_to_cpu(tx_resp->rate_n_flags),
- tx_resp->failure_frame);
-
- freed = il4965_tx_queue_reclaim(il, txq_id, idx);
- if (qc && likely(sta_id != IL_INVALID_STATION))
- il4965_free_tfds_in_queue(il, sta_id, tid, freed);
- else if (sta_id == IL_INVALID_STATION)
- D_TX_REPLY("Station not known\n");
-
- if (il->mac80211_registered &&
- il_queue_space(&txq->q) > txq->q.low_mark)
- il_wake_queue(il, txq);
- }
- if (qc && likely(sta_id != IL_INVALID_STATION))
- il4965_txq_check_empty(il, sta_id, tid, txq_id);
-
- il4965_check_abort_status(il, tx_resp->frame_count, status);
-
- spin_unlock_irqrestore(&il->sta_lock, flags);
-}
-
-static void il4965_rx_beacon_notif(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il4965_beacon_notif *beacon = (void *)pkt->u.raw;
- u8 rate __maybe_unused =
- il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
- D_RX("beacon status %#x, retries:%d ibssmgr:%d "
- "tsf:0x%.8x%.8x rate:%d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-
- il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-}
-
-/* Set up 4965-specific Rx frame reply handlers */
-static void il4965_rx_handler_setup(struct il_priv *il)
-{
- /* Legacy Rx frames */
- il->rx_handlers[REPLY_RX] = il4965_rx_reply_rx;
- /* Tx response */
- il->rx_handlers[REPLY_TX] = il4965_rx_reply_tx;
- il->rx_handlers[BEACON_NOTIFICATION] = il4965_rx_beacon_notif;
-}
-
-static struct il_hcmd_ops il4965_hcmd = {
- .rxon_assoc = il4965_send_rxon_assoc,
- .commit_rxon = il4965_commit_rxon,
- .set_rxon_chain = il4965_set_rxon_chain,
-};
-
-static void il4965_post_scan(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- il_commit_rxon(il, ctx);
-}
-
-static void il4965_post_associate(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
- struct ieee80211_vif *vif = ctx->vif;
- struct ieee80211_conf *conf = NULL;
- int ret = 0;
-
- if (!vif || !il->is_open)
- return;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- il_scan_cancel_timeout(il, 200);
-
- conf = il_ieee80211_get_hw_conf(il->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- il_commit_rxon(il, ctx);
-
- ret = il_send_rxon_timing(il, ctx);
- if (ret)
- IL_WARN("RXON timing - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- il_set_rxon_ht(il, &il->current_ht_config);
-
- if (il->cfg->ops->hcmd->set_rxon_chain)
- il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
-
- ctx->staging.assoc_id = cpu_to_le16(vif->bss_conf.aid);
-
- D_ASSOC("assoc id %d beacon interval %d\n",
- vif->bss_conf.aid, vif->bss_conf.beacon_int);
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- il_commit_rxon(il, ctx);
-
- D_ASSOC("Associated as %d to: %pM\n",
- vif->bss_conf.aid, ctx->active.bssid_addr);
-
- switch (vif->type) {
- case NL80211_IFTYPE_STATION:
- break;
- case NL80211_IFTYPE_ADHOC:
- il4965_send_beacon_cmd(il);
- break;
- default:
- IL_ERR("%s Should not be called in %d mode\n",
- __func__, vif->type);
- break;
- }
-
- /* the chain noise calibration will enabled PM upon completion
- * If chain noise has already been run, then we need to enable
- * power management here */
- if (il->chain_noise_data.state == IL_CHAIN_NOISE_DONE)
- il_power_update_mode(il, false);
-
- /* Enable Rx differential gain and sensitivity calibrations */
- il4965_chain_noise_reset(il);
- il->start_calib = 1;
-}
-
-static void il4965_config_ap(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
- struct ieee80211_vif *vif = ctx->vif;
- int ret = 0;
-
- lockdep_assert_held(&il->mutex);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!il_is_associated_ctx(ctx)) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- il_commit_rxon(il, ctx);
-
- /* RXON Timing */
- ret = il_send_rxon_timing(il, ctx);
- if (ret)
- IL_WARN("RXON timing failed - "
- "Attempting to continue.\n");
-
- /* AP has all antennas */
- il->chain_noise_data.active_chains =
- il->hw_params.valid_rx_ant;
- il_set_rxon_ht(il, &il->current_ht_config);
- if (il->cfg->ops->hcmd->set_rxon_chain)
- il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* need to send beacon cmd before committing assoc RXON! */
- il4965_send_beacon_cmd(il);
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- il_commit_rxon(il, ctx);
- }
- il4965_send_beacon_cmd(il);
-}
-
-static struct il_hcmd_utils_ops il4965_hcmd_utils = {
- .get_hcmd_size = il4965_get_hcmd_size,
- .build_addsta_hcmd = il4965_build_addsta_hcmd,
- .request_scan = il4965_request_scan,
- .post_scan = il4965_post_scan,
-};
-
-static struct il_lib_ops il4965_lib = {
- .set_hw_params = il4965_hw_set_hw_params,
- .txq_update_byte_cnt_tbl = il4965_txq_update_byte_cnt_tbl,
- .txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd,
- .txq_free_tfd = il4965_hw_txq_free_tfd,
- .txq_init = il4965_hw_tx_queue_init,
- .rx_handler_setup = il4965_rx_handler_setup,
- .is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr,
- .init_alive_start = il4965_init_alive_start,
- .load_ucode = il4965_load_bsm,
- .dump_nic_error_log = il4965_dump_nic_error_log,
- .dump_fh = il4965_dump_fh,
- .set_channel_switch = il4965_hw_channel_switch,
- .apm_ops = {
- .init = il_apm_init,
- .config = il4965_nic_config,
- },
- .eeprom_ops = {
- .regulatory_bands = {
- EEPROM_REGULATORY_BAND_1_CHANNELS,
- EEPROM_REGULATORY_BAND_2_CHANNELS,
- EEPROM_REGULATORY_BAND_3_CHANNELS,
- EEPROM_REGULATORY_BAND_4_CHANNELS,
- EEPROM_REGULATORY_BAND_5_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_24_HT40_CHANNELS,
- EEPROM_4965_REGULATORY_BAND_52_HT40_CHANNELS
- },
- .acquire_semaphore = il4965_eeprom_acquire_semaphore,
- .release_semaphore = il4965_eeprom_release_semaphore,
- },
- .send_tx_power = il4965_send_tx_power,
- .update_chain_flags = il4965_update_chain_flags,
- .temp_ops = {
- .temperature = il4965_temperature_calib,
- },
- .debugfs_ops = {
- .rx_stats_read = il4965_ucode_rx_stats_read,
- .tx_stats_read = il4965_ucode_tx_stats_read,
- .general_stats_read = il4965_ucode_general_stats_read,
- },
-};
-
-static const struct il_legacy_ops il4965_legacy_ops = {
- .post_associate = il4965_post_associate,
- .config_ap = il4965_config_ap,
- .manage_ibss_station = il4965_manage_ibss_station,
- .update_bcast_stations = il4965_update_bcast_stations,
-};
-
-struct ieee80211_ops il4965_hw_ops = {
- .tx = il4965_mac_tx,
- .start = il4965_mac_start,
- .stop = il4965_mac_stop,
- .add_interface = il_mac_add_interface,
- .remove_interface = il_mac_remove_interface,
- .change_interface = il_mac_change_interface,
- .config = il_mac_config,
- .configure_filter = il4965_configure_filter,
- .set_key = il4965_mac_set_key,
- .update_tkip_key = il4965_mac_update_tkip_key,
- .conf_tx = il_mac_conf_tx,
- .reset_tsf = il_mac_reset_tsf,
- .bss_info_changed = il_mac_bss_info_changed,
- .ampdu_action = il4965_mac_ampdu_action,
- .hw_scan = il_mac_hw_scan,
- .sta_add = il4965_mac_sta_add,
- .sta_remove = il_mac_sta_remove,
- .channel_switch = il4965_mac_channel_switch,
- .tx_last_beacon = il_mac_tx_last_beacon,
-};
-
-static const struct il_ops il4965_ops = {
- .lib = &il4965_lib,
- .hcmd = &il4965_hcmd,
- .utils = &il4965_hcmd_utils,
- .led = &il4965_led_ops,
- .legacy = &il4965_legacy_ops,
- .ieee80211_ops = &il4965_hw_ops,
-};
-
-static struct il_base_params il4965_base_params = {
- .eeprom_size = IL4965_EEPROM_IMG_SIZE,
- .num_of_queues = IL49_NUM_QUEUES,
- .num_of_ampdu_queues = IL49_NUM_AMPDU_QUEUES,
- .pll_cfg_val = 0,
- .set_l0s = true,
- .use_bsm = true,
- .led_compensation = 61,
- .chain_noise_num_beacons = IL4965_CAL_NUM_BEACONS,
- .wd_timeout = IL_DEF_WD_TIMEOUT,
- .temperature_kelvin = true,
- .ucode_tracing = true,
- .sensitivity_calib_by_driver = true,
- .chain_noise_calib_by_driver = true,
-};
-
-struct il_cfg il4965_cfg = {
- .name = "Intel(R) Wireless WiFi Link 4965AGN",
- .fw_name_pre = IL4965_FW_PRE,
- .ucode_api_max = IL4965_UCODE_API_MAX,
- .ucode_api_min = IL4965_UCODE_API_MIN,
- .sku = IL_SKU_A|IL_SKU_G|IL_SKU_N,
- .valid_tx_ant = ANT_AB,
- .valid_rx_ant = ANT_ABC,
- .eeprom_ver = EEPROM_4965_EEPROM_VERSION,
- .eeprom_calib_ver = EEPROM_4965_TX_POWER_VERSION,
- .ops = &il4965_ops,
- .mod_params = &il4965_mod_params,
- .base_params = &il4965_base_params,
- .led_mode = IL_LED_BLINK,
- /*
- * Force use of chains B and C for scan RX on 5 GHz band
- * because the device has off-channel reception on chain A.
- */
- .scan_rx_antennas[IEEE80211_BAND_5GHZ] = ANT_BC,
-};
-
-/* Module firmware */
-MODULE_FIRMWARE(IL4965_MODULE_FIRMWARE(IL4965_UCODE_API_MAX));
+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/ieee80211_radiotap.h>
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#define DRV_NAME "iwl3945"
-
-#include "iwl-fh.h"
-#include "iwl-3945-fh.h"
-#include "iwl-commands.h"
-#include "iwl-sta.h"
-#include "iwl-3945.h"
-#include "iwl-core.h"
-#include "iwl-helpers.h"
-#include "iwl-dev.h"
-#include "iwl-spectrum.h"
-
-/*
- * module name, copyright, version, etc.
- */
-
-#define DRV_DESCRIPTION \
-"Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux"
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-/*
- * add "s" to indicate spectrum measurement included.
- * we add it here to be consistent with previous releases in which
- * this was configurable.
- */
-#define DRV_VERSION IWLWIFI_VERSION VD "s"
-#define DRV_COPYRIGHT "Copyright(c) 2003-2011 Intel Corporation"
-#define DRV_AUTHOR "<ilw@linux.intel.com>"
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-
- /* module parameters */
-struct il_mod_params il3945_mod_params = {
- .sw_crypto = 1,
- .restart_fw = 1,
- .disable_hw_scan = 1,
- /* the rest are 0 by default */
-};
-
-/**
- * il3945_get_antenna_flags - Get antenna flags for RXON command
- * @il: eeprom and antenna fields are used to determine antenna flags
- *
- * il->eeprom39 is used to determine if antenna AUX/MAIN are reversed
- * il3945_mod_params.antenna specifies the antenna diversity mode:
- *
- * IL_ANTENNA_DIVERSITY - NIC selects best antenna by itself
- * IL_ANTENNA_MAIN - Force MAIN antenna
- * IL_ANTENNA_AUX - Force AUX antenna
- */
-__le32 il3945_get_antenna_flags(const struct il_priv *il)
-{
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
-
- switch (il3945_mod_params.antenna) {
- case IL_ANTENNA_DIVERSITY:
- return 0;
-
- case IL_ANTENNA_MAIN:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
-
- case IL_ANTENNA_AUX:
- if (eeprom->antenna_switch_type)
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_A_MSK;
- return RXON_FLG_DIS_DIV_MSK | RXON_FLG_ANT_B_MSK;
- }
-
- /* bad antenna selector value */
- IL_ERR("Bad antenna selector value (0x%x)\n",
- il3945_mod_params.antenna);
-
- return 0; /* "diversity" is default if error */
-}
-
-static int il3945_set_ccmp_dynamic_key_info(struct il_priv *il,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- unsigned long flags;
- __le16 key_flags = 0;
- int ret;
-
- key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
- key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
-
- if (sta_id == il->ctx.bcast_sta_id)
- key_flags |= STA_KEY_MULTICAST_MSK;
-
- keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
- keyconf->hw_key_idx = keyconf->keyidx;
- key_flags &= ~STA_KEY_FLG_INVALID;
-
- spin_lock_irqsave(&il->sta_lock, flags);
- il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
- il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
- memcpy(il->stations[sta_id].keyinfo.key, keyconf->key,
- keyconf->keylen);
-
- memcpy(il->stations[sta_id].sta.key.key, keyconf->key,
- keyconf->keylen);
-
- if ((il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_ENCRYPT_MSK)
- == STA_KEY_FLG_NO_ENC)
- il->stations[sta_id].sta.key.key_offset =
- il_get_free_ucode_key_idx(il);
- /* else, we are overriding an existing key => no need to allocated room
- * in uCode. */
-
- WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
- "no space for a new key");
-
- il->stations[sta_id].sta.key.key_flags = key_flags;
- il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
-
- D_INFO("hwcrypto: modify ucode station key info\n");
-
- ret = il_send_add_sta(il,
- &il->stations[sta_id].sta, CMD_ASYNC);
-
- spin_unlock_irqrestore(&il->sta_lock, flags);
-
- return ret;
-}
-
-static int il3945_set_tkip_dynamic_key_info(struct il_priv *il,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int il3945_set_wep_dynamic_key_info(struct il_priv *il,
- struct ieee80211_key_conf *keyconf,
- u8 sta_id)
-{
- return -EOPNOTSUPP;
-}
-
-static int il3945_clear_sta_key_info(struct il_priv *il, u8 sta_id)
-{
- unsigned long flags;
- struct il_addsta_cmd sta_cmd;
-
- spin_lock_irqsave(&il->sta_lock, flags);
- memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
- memset(&il->stations[sta_id].sta.key, 0,
- sizeof(struct il4965_keyinfo));
- il->stations[sta_id].sta.key.key_flags = STA_KEY_FLG_NO_ENC;
- il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
- il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
- memcpy(&sta_cmd, &il->stations[sta_id].sta, sizeof(struct il_addsta_cmd));
- spin_unlock_irqrestore(&il->sta_lock, flags);
-
- D_INFO("hwcrypto: clear ucode station key info\n");
- return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
-}
-
-static int il3945_set_dynamic_key(struct il_priv *il,
- struct ieee80211_key_conf *keyconf, u8 sta_id)
-{
- int ret = 0;
-
- keyconf->hw_key_idx = HW_KEY_DYNAMIC;
-
- switch (keyconf->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- ret = il3945_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_TKIP:
- ret = il3945_set_tkip_dynamic_key_info(il, keyconf, sta_id);
- break;
- case WLAN_CIPHER_SUITE_WEP40:
- case WLAN_CIPHER_SUITE_WEP104:
- ret = il3945_set_wep_dynamic_key_info(il, keyconf, sta_id);
- break;
- default:
- IL_ERR("Unknown alg: %s alg=%x\n", __func__,
- keyconf->cipher);
- ret = -EINVAL;
- }
-
- D_WEP("Set dynamic key: alg=%x len=%d idx=%d sta=%d ret=%d\n",
- keyconf->cipher, keyconf->keylen, keyconf->keyidx,
- sta_id, ret);
-
- return ret;
-}
-
-static int il3945_remove_static_key(struct il_priv *il)
-{
- int ret = -EOPNOTSUPP;
-
- return ret;
-}
-
-static int il3945_set_static_key(struct il_priv *il,
- struct ieee80211_key_conf *key)
-{
- if (key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
- key->cipher == WLAN_CIPHER_SUITE_WEP104)
- return -EOPNOTSUPP;
-
- IL_ERR("Static key invalid: cipher %x\n", key->cipher);
- return -EINVAL;
-}
-
-static void il3945_clear_free_frames(struct il_priv *il)
-{
- struct list_head *element;
-
- D_INFO("%d frames on pre-allocated heap on clear.\n",
- il->frames_count);
-
- while (!list_empty(&il->free_frames)) {
- element = il->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct il3945_frame, list));
- il->frames_count--;
- }
-
- if (il->frames_count) {
- IL_WARN("%d frames still in use. Did we lose one?\n",
- il->frames_count);
- il->frames_count = 0;
- }
-}
-
-static struct il3945_frame *il3945_get_free_frame(struct il_priv *il)
-{
- struct il3945_frame *frame;
- struct list_head *element;
- if (list_empty(&il->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IL_ERR("Could not allocate frame!\n");
- return NULL;
- }
-
- il->frames_count++;
- return frame;
- }
-
- element = il->free_frames.next;
- list_del(element);
- return list_entry(element, struct il3945_frame, list);
-}
-
-static void il3945_free_frame(struct il_priv *il, struct il3945_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &il->free_frames);
-}
-
-unsigned int il3945_fill_beacon_frame(struct il_priv *il,
- struct ieee80211_hdr *hdr,
- int left)
-{
-
- if (!il_is_associated(il) || !il->beacon_skb)
- return 0;
-
- if (il->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
-
- return il->beacon_skb->len;
-}
-
-static int il3945_send_beacon_cmd(struct il_priv *il)
-{
- struct il3945_frame *frame;
- unsigned int frame_size;
- int rc;
- u8 rate;
-
- frame = il3945_get_free_frame(il);
-
- if (!frame) {
- IL_ERR("Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
-
- rate = il_get_lowest_plcp(il,
- &il->ctx);
-
- frame_size = il3945_hw_get_beacon_cmd(il, frame, rate);
-
- rc = il_send_cmd_pdu(il, REPLY_TX_BEACON, frame_size,
- &frame->u.cmd[0]);
-
- il3945_free_frame(il, frame);
-
- return rc;
-}
-
-static void il3945_unset_hw_params(struct il_priv *il)
-{
- if (il->_3945.shared_virt)
- dma_free_coherent(&il->pci_dev->dev,
- sizeof(struct il3945_shared),
- il->_3945.shared_virt,
- il->_3945.shared_phys);
-}
-
-static void il3945_build_tx_cmd_hwcrypto(struct il_priv *il,
- struct ieee80211_tx_info *info,
- struct il_device_cmd *cmd,
- struct sk_buff *skb_frag,
- int sta_id)
-{
- struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
- struct il_hw_key *keyinfo = &il->stations[sta_id].keyinfo;
-
- tx_cmd->sec_ctl = 0;
-
- switch (keyinfo->cipher) {
- case WLAN_CIPHER_SUITE_CCMP:
- tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
- memcpy(tx_cmd->key, keyinfo->key, keyinfo->keylen);
- D_TX("tx_cmd with AES hwcrypto\n");
- break;
-
- case WLAN_CIPHER_SUITE_TKIP:
- break;
-
- case WLAN_CIPHER_SUITE_WEP104:
- tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
- /* fall through */
- case WLAN_CIPHER_SUITE_WEP40:
- tx_cmd->sec_ctl |= TX_CMD_SEC_WEP |
- (info->control.hw_key->hw_key_idx & TX_CMD_SEC_MSK) << TX_CMD_SEC_SHIFT;
-
- memcpy(&tx_cmd->key[3], keyinfo->key, keyinfo->keylen);
-
- D_TX("Configuring packet for WEP encryption "
- "with key %d\n", info->control.hw_key->hw_key_idx);
- break;
-
- default:
- IL_ERR("Unknown encode cipher %x\n", keyinfo->cipher);
- break;
- }
-}
-
-/*
- * handle build REPLY_TX command notification.
- */
-static void il3945_build_tx_cmd_basic(struct il_priv *il,
- struct il_device_cmd *cmd,
- struct ieee80211_tx_info *info,
- struct ieee80211_hdr *hdr, u8 std_id)
-{
- struct il3945_tx_cmd *tx_cmd = (struct il3945_tx_cmd *)cmd->cmd.payload;
- __le32 tx_flags = tx_cmd->tx_flags;
- __le16 fc = hdr->frame_control;
-
- tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
- tx_flags |= TX_CMD_FLG_ACK_MSK;
- if (ieee80211_is_mgmt(fc))
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- if (ieee80211_is_probe_resp(fc) &&
- !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
- tx_flags |= TX_CMD_FLG_TSF_MSK;
- } else {
- tx_flags &= (~TX_CMD_FLG_ACK_MSK);
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- tx_cmd->sta_id = std_id;
- if (ieee80211_has_morefrags(fc))
- tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tx_cmd->tid_tspec = qc[0] & 0xf;
- tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
- } else {
- tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
- }
-
- il_tx_cmd_protection(il, info, fc, &tx_flags);
-
- tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
- if (ieee80211_is_mgmt(fc)) {
- if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
- else
- tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
- } else {
- tx_cmd->timeout.pm_frame_timeout = 0;
- }
-
- tx_cmd->driver_txop = 0;
- tx_cmd->tx_flags = tx_flags;
- tx_cmd->next_frame_len = 0;
-}
-
-/*
- * start REPLY_TX command process
- */
-static int il3945_tx_skb(struct il_priv *il, struct sk_buff *skb)
-{
- struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
- struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
- struct il3945_tx_cmd *tx_cmd;
- struct il_tx_queue *txq = NULL;
- struct il_queue *q = NULL;
- struct il_device_cmd *out_cmd;
- struct il_cmd_meta *out_meta;
- dma_addr_t phys_addr;
- dma_addr_t txcmd_phys;
- int txq_id = skb_get_queue_mapping(skb);
- u16 len, idx, hdr_len;
- u8 id;
- u8 unicast;
- u8 sta_id;
- u8 tid = 0;
- __le16 fc;
- u8 wait_write_ptr = 0;
- unsigned long flags;
-
- spin_lock_irqsave(&il->lock, flags);
- if (il_is_rfkill(il)) {
- D_DROP("Dropping - RF KILL\n");
- goto drop_unlock;
- }
-
- if ((ieee80211_get_tx_rate(il->hw, info)->hw_value & 0xFF) == IL_INVALID_RATE) {
- IL_ERR("ERROR: No TX rate available.\n");
- goto drop_unlock;
- }
-
- unicast = !is_multicast_ether_addr(hdr->addr1);
- id = 0;
-
- fc = hdr->frame_control;
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (ieee80211_is_auth(fc))
- D_TX("Sending AUTH frame\n");
- else if (ieee80211_is_assoc_req(fc))
- D_TX("Sending ASSOC frame\n");
- else if (ieee80211_is_reassoc_req(fc))
- D_TX("Sending REASSOC frame\n");
-#endif
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- hdr_len = ieee80211_hdrlen(fc);
-
- /* Find idx into station table for destination station */
- sta_id = il_sta_id_or_broadcast(
- il, &il->ctx,
- info->control.sta);
- if (sta_id == IL_INVALID_STATION) {
- D_DROP("Dropping - INVALID STATION: %pM\n",
- hdr->addr1);
- goto drop;
- }
-
- D_RATE("station Id %d\n", sta_id);
-
- if (ieee80211_is_data_qos(fc)) {
- u8 *qc = ieee80211_get_qos_ctl(hdr);
- tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
- if (unlikely(tid >= MAX_TID_COUNT))
- goto drop;
- }
-
- /* Descriptor for chosen Tx queue */
- txq = &il->txq[txq_id];
- q = &txq->q;
-
- if ((il_queue_space(q) < q->high_mark))
- goto drop;
-
- spin_lock_irqsave(&il->lock, flags);
-
- idx = il_get_cmd_idx(q, q->write_ptr, 0);
-
- /* Set up driver data for this TFD */
- memset(&(txq->txb[q->write_ptr]), 0, sizeof(struct il_tx_info));
- txq->txb[q->write_ptr].skb = skb;
- txq->txb[q->write_ptr].ctx = &il->ctx;
-
- /* Init first empty entry in queue's array of Tx/cmd buffers */
- out_cmd = txq->cmd[idx];
- out_meta = &txq->meta[idx];
- tx_cmd = (struct il3945_tx_cmd *)out_cmd->cmd.payload;
- memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
- memset(tx_cmd, 0, sizeof(*tx_cmd));
-
- /*
- * Set up the Tx-command (not MAC!) header.
- * Store the chosen Tx queue and TFD idx within the sequence field;
- * after Tx, uCode's Tx response will return this value so driver can
- * locate the frame within the tx queue and do post-tx processing.
- */
- out_cmd->hdr.cmd = REPLY_TX;
- out_cmd->hdr.sequence = cpu_to_le16((u16)(QUEUE_TO_SEQ(txq_id) |
- IDX_TO_SEQ(q->write_ptr)));
-
- /* Copy MAC header from skb into command buffer */
- memcpy(tx_cmd->hdr, hdr, hdr_len);
-
-
- if (info->control.hw_key)
- il3945_build_tx_cmd_hwcrypto(il, info, out_cmd, skb, sta_id);
-
- /* TODO need this for burst mode later on */
- il3945_build_tx_cmd_basic(il, out_cmd, info, hdr, sta_id);
-
- /* set is_hcca to 0; it probably will never be implemented */
- il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id, 0);
-
- /* Total # bytes to be transmitted */
- len = (u16)skb->len;
- tx_cmd->len = cpu_to_le16(len);
-
- il_dbg_log_tx_data_frame(il, len, hdr);
- il_update_stats(il, true, fc, len);
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK;
- tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK;
-
- if (!ieee80211_has_morefrags(hdr->frame_control)) {
- txq->need_update = 1;
- } else {
- wait_write_ptr = 1;
- txq->need_update = 0;
- }
-
- D_TX("sequence nr = 0X%x\n",
- le16_to_cpu(out_cmd->hdr.sequence));
- D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
- il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd));
- il_print_hex_dump(il, IL_DL_TX, (u8 *)tx_cmd->hdr,
- ieee80211_hdrlen(fc));
-
- /*
- * Use the first empty entry in this queue's command buffer array
- * to contain the Tx command and MAC header concatenated together
- * (payload data will be in another buffer).
- * Size of this varies, due to varying MAC header length.
- * If end is not dword aligned, we'll have 2 extra bytes at the end
- * of the MAC header (device reads on dword boundaries).
- * We'll tell device about this padding later.
- */
- len = sizeof(struct il3945_tx_cmd) +
- sizeof(struct il_cmd_header) + hdr_len;
- len = (len + 3) & ~3;
-
- /* Physical address of this Tx command's header (not MAC header!),
- * within command buffer array. */
- txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr,
- len, PCI_DMA_TODEVICE);
- /* we do not map meta data ... so we can safely access address to
- * provide to unmap command*/
- dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
- dma_unmap_len_set(out_meta, len, len);
-
- /* Add buffer containing Tx command and MAC(!) header to TFD's
- * first entry */
- il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
- txcmd_phys, len, 1, 0);
-
-
- /* Set up TFD's 2nd entry to point directly to remainder of skb,
- * if any (802.11 null frames have no payload). */
- len = skb->len - hdr_len;
- if (len) {
- phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len,
- len, PCI_DMA_TODEVICE);
- il->cfg->ops->lib->txq_attach_buf_to_tfd(il, txq,
- phys_addr, len,
- 0, U32_PAD(len));
- }
-
-
- /* Tell device the write idx *just past* this latest filled TFD */
- q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
- il_txq_update_write_ptr(il, txq);
- spin_unlock_irqrestore(&il->lock, flags);
-
- if (il_queue_space(q) < q->high_mark
- && il->mac80211_registered) {
- if (wait_write_ptr) {
- spin_lock_irqsave(&il->lock, flags);
- txq->need_update = 1;
- il_txq_update_write_ptr(il, txq);
- spin_unlock_irqrestore(&il->lock, flags);
- }
-
- il_stop_queue(il, txq);
- }
-
- return 0;
-
-drop_unlock:
- spin_unlock_irqrestore(&il->lock, flags);
-drop:
- return -1;
-}
-
-static int il3945_get_measurement(struct il_priv *il,
- struct ieee80211_measurement_params *params,
- u8 type)
-{
- struct il_spectrum_cmd spectrum;
- struct il_rx_pkt *pkt;
- struct il_host_cmd cmd = {
- .id = REPLY_SPECTRUM_MEASUREMENT_CMD,
- .data = (void *)&spectrum,
- .flags = CMD_WANT_SKB,
- };
- u32 add_time = le64_to_cpu(params->start_time);
- int rc;
- int spectrum_resp_status;
- int duration = le16_to_cpu(params->duration);
- struct il_rxon_context *ctx = &il->ctx;
-
- if (il_is_associated(il))
- add_time = il_usecs_to_beacons(il,
- le64_to_cpu(params->start_time) - il->_3945.last_tsf,
- le16_to_cpu(ctx->timing.beacon_interval));
-
- memset(&spectrum, 0, sizeof(spectrum));
-
- spectrum.channel_count = cpu_to_le16(1);
- spectrum.flags =
- RXON_FLG_TSF2HOST_MSK | RXON_FLG_ANT_A_MSK | RXON_FLG_DIS_DIV_MSK;
- spectrum.filter_flags = MEASUREMENT_FILTER_FLAG;
- cmd.len = sizeof(spectrum);
- spectrum.len = cpu_to_le16(cmd.len - sizeof(spectrum.len));
-
- if (il_is_associated(il))
- spectrum.start_time =
- il_add_beacon_time(il,
- il->_3945.last_beacon_time, add_time,
- le16_to_cpu(ctx->timing.beacon_interval));
- else
- spectrum.start_time = 0;
-
- spectrum.channels[0].duration = cpu_to_le32(duration * TIME_UNIT);
- spectrum.channels[0].channel = params->channel;
- spectrum.channels[0].type = type;
- if (ctx->active.flags & RXON_FLG_BAND_24G_MSK)
- spectrum.flags |= RXON_FLG_BAND_24G_MSK |
- RXON_FLG_AUTO_DETECT_MSK | RXON_FLG_TGG_PROTECT_MSK;
-
- rc = il_send_cmd_sync(il, &cmd);
- if (rc)
- return rc;
-
- pkt = (struct il_rx_pkt *)cmd.reply_page;
- if (pkt->hdr.flags & IL_CMD_FAILED_MSK) {
- IL_ERR("Bad return from REPLY_RX_ON_ASSOC command\n");
- rc = -EIO;
- }
-
- spectrum_resp_status = le16_to_cpu(pkt->u.spectrum.status);
- switch (spectrum_resp_status) {
- case 0: /* Command will be handled */
- if (pkt->u.spectrum.id != 0xff) {
- D_INFO("Replaced existing measurement: %d\n",
- pkt->u.spectrum.id);
- il->measurement_status &= ~MEASUREMENT_READY;
- }
- il->measurement_status |= MEASUREMENT_ACTIVE;
- rc = 0;
- break;
-
- case 1: /* Command will not be handled */
- rc = -EAGAIN;
- break;
- }
-
- il_free_pages(il, cmd.reply_page);
-
- return rc;
-}
-
-static void il3945_rx_reply_alive(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- D_INFO("Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- D_INFO("Initialization Alive received.\n");
- memcpy(&il->card_alive_init, &pkt->u.alive_frame,
- sizeof(struct il_alive_resp));
- pwork = &il->init_alive_start;
- } else {
- D_INFO("Runtime Alive received.\n");
- memcpy(&il->card_alive, &pkt->u.alive_frame,
- sizeof(struct il_alive_resp));
- pwork = &il->alive_start;
- il3945_disable_events(il);
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(il->workqueue, pwork,
- msecs_to_jiffies(5));
- else
- IL_WARN("uCode did not respond OK.\n");
-}
-
-static void il3945_rx_reply_add_sta(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
-#ifdef CONFIG_IWLEGACY_DEBUG
- struct il_rx_pkt *pkt = rxb_addr(rxb);
-#endif
-
- D_RX("Received REPLY_ADD_STA: 0x%02X\n", pkt->u.status);
-}
-
-static void il3945_rx_beacon_notif(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il3945_beacon_notif *beacon = &(pkt->u.beacon_status);
-#ifdef CONFIG_IWLEGACY_DEBUG
- u8 rate = beacon->beacon_notify_hdr.rate;
-
- D_RX("beacon status %x retries %d iss %d "
- "tsf %d %d rate %d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void il3945_rx_card_state_notif(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
- unsigned long status = il->status;
-
- IL_WARN("Card state received: HW:%s SW:%s\n",
- (flags & HW_CARD_DISABLED) ? "Kill" : "On",
- (flags & SW_CARD_DISABLED) ? "Kill" : "On");
-
- _il_wr(il, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &il->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
-
-
- il_scan_cancel(il);
-
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &il->status)))
- wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
- else
- wake_up(&il->wait_command_queue);
-}
-
-/**
- * il3945_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void il3945_setup_rx_handlers(struct il_priv *il)
-{
- il->rx_handlers[REPLY_ALIVE] = il3945_rx_reply_alive;
- il->rx_handlers[REPLY_ADD_STA] = il3945_rx_reply_add_sta;
- il->rx_handlers[REPLY_ERROR] = il_rx_reply_error;
- il->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = il_rx_csa;
- il->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
- il_rx_spectrum_measure_notif;
- il->rx_handlers[PM_SLEEP_NOTIFICATION] = il_rx_pm_sleep_notif;
- il->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
- il_rx_pm_debug_stats_notif;
- il->rx_handlers[BEACON_NOTIFICATION] = il3945_rx_beacon_notif;
-
- /*
- * The same handler is used for both the REPLY to a discrete
- * stats request from the host as well as for the periodic
- * stats notifications (after received beacons) from the uCode.
- */
- il->rx_handlers[REPLY_STATISTICS_CMD] = il3945_reply_stats;
- il->rx_handlers[STATISTICS_NOTIFICATION] = il3945_hw_rx_stats;
-
- il_setup_rx_scan_handlers(il);
- il->rx_handlers[CARD_STATE_NOTIFICATION] = il3945_rx_card_state_notif;
-
- /* Set up hardware specific Rx handlers */
- il3945_hw_rx_handler_setup(il);
-}
-
-/************************** RX-FUNCTIONS ****************************/
-/*
- * Rx theory of operation
- *
- * The host allocates 32 DMA target addresses and passes the host address
- * to the firmware at register IL_RFDS_TBL_LOWER + N * RFD_SIZE where N is
- * 0 to 31
- *
- * Rx Queue Indexes
- * The host/firmware share two idx registers for managing the Rx buffers.
- *
- * The READ idx maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ idx is managed by the firmware once the card is enabled.
- *
- * The WRITE idx maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * IDX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ idx
- * and fire the RX interrupt. The driver can then query the READ idx and
- * process as many packets as possible, moving the WRITE idx forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In il3945_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ IDX is updated (updating the
- * 'processed' and 'read' driver idxes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' idx is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * IDX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * il3945_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * il3945_rx_queue_restock
- * il3945_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE idx. If insufficient rx_free buffers
- * are available, schedules il3945_rx_replenish
- *
- * -- enable interrupts --
- * ISR - il3945_rx() Detach il_rx_bufs from pool up to the
- * READ IDX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls il3945_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * il3945_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 il3945_dma_addr2rbd_ptr(struct il_priv *il,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)dma_addr);
-}
-
-/**
- * il3945_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' idx forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-static void il3945_rx_queue_restock(struct il_priv *il)
-{
- struct il_rx_queue *rxq = &il->rxq;
- struct list_head *element;
- struct il_rx_buf *rxb;
- unsigned long flags;
- int write;
-
- spin_lock_irqsave(&rxq->lock, flags);
- write = rxq->write & ~0x7;
- while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct il_rx_buf, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = il3945_dma_addr2rbd_ptr(il, rxb->page_dma);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(il->workqueue, &il->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if (rxq->write_actual != (rxq->write & ~0x7) ||
- abs(rxq->write - rxq->read) > 7) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- il_rx_queue_update_write_ptr(il, rxq);
- }
-}
-
-/**
- * il3945_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via il3945_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-static void il3945_rx_allocate(struct il_priv *il, gfp_t priority)
-{
- struct il_rx_queue *rxq = &il->rxq;
- struct list_head *element;
- struct il_rx_buf *rxb;
- struct page *page;
- unsigned long flags;
- gfp_t gfp_mask = priority;
-
- while (1) {
- spin_lock_irqsave(&rxq->lock, flags);
-
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- if (rxq->free_count > RX_LOW_WATERMARK)
- gfp_mask |= __GFP_NOWARN;
-
- if (il->hw_params.rx_page_order > 0)
- gfp_mask |= __GFP_COMP;
-
- /* Alloc a new receive buffer */
- page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
- if (!page) {
- if (net_ratelimit())
- D_INFO("Failed to allocate SKB buffer.\n");
- if (rxq->free_count <= RX_LOW_WATERMARK &&
- net_ratelimit())
- IL_ERR("Failed to allocate SKB buffer with %s. Only %u free buffers remaining.\n",
- priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
- rxq->free_count);
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- break;
- }
-
- spin_lock_irqsave(&rxq->lock, flags);
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- __free_pages(page, il->hw_params.rx_page_order);
- return;
- }
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct il_rx_buf, list);
- list_del(element);
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- rxb->page = page;
- /* Get physical address of RB/SKB */
- rxb->page_dma = pci_map_page(il->pci_dev, page, 0,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- il->alloc_rxb_page++;
-
- spin_unlock_irqrestore(&rxq->lock, flags);
- }
-}
-
-void il3945_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
-{
- unsigned long flags;
- int i;
- spin_lock_irqsave(&rxq->lock, flags);
- INIT_LIST_HEAD(&rxq->rx_free);
- INIT_LIST_HEAD(&rxq->rx_used);
- /* Fill the rx_used queue with _all_ of the Rx buffers */
- for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
- /* In the reset function, these buffers may have been allocated
- * to an SKB, so we need to unmap and free potential storage */
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __il_free_pages(il, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
- }
-
- /* Set us so that we have processed and used all buffers, but have
- * not restocked the Rx queue with fresh buffers */
- rxq->read = rxq->write = 0;
- rxq->write_actual = 0;
- rxq->free_count = 0;
- spin_unlock_irqrestore(&rxq->lock, flags);
-}
-
-void il3945_rx_replenish(void *data)
-{
- struct il_priv *il = data;
- unsigned long flags;
-
- il3945_rx_allocate(il, GFP_KERNEL);
-
- spin_lock_irqsave(&il->lock, flags);
- il3945_rx_queue_restock(il);
- spin_unlock_irqrestore(&il->lock, flags);
-}
-
-static void il3945_rx_replenish_now(struct il_priv *il)
-{
- il3945_rx_allocate(il, GFP_ATOMIC);
-
- il3945_rx_queue_restock(il);
-}
-
-
-/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
- * If an SKB has been detached, the POOL needs to have its SKB set to NULL
- * This free routine walks the list of POOL entries and if SKB is set to
- * non NULL it is unmapped and freed
- */
-static void il3945_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
-{
- int i;
- for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
- if (rxq->pool[i].page != NULL) {
- pci_unmap_page(il->pci_dev, rxq->pool[i].page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- __il_free_pages(il, rxq->pool[i].page);
- rxq->pool[i].page = NULL;
- }
- }
-
- dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
- rxq->bd_dma);
- dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
- rxq->rb_stts, rxq->rb_stts_dma);
- rxq->bd = NULL;
- rxq->rb_stts = NULL;
-}
-
-
-/* Convert linear signal-to-noise ratio into dB */
-static u8 ratio2dB[100] = {
-/* 0 1 2 3 4 5 6 7 8 9 */
- 0, 0, 6, 10, 12, 14, 16, 17, 18, 19, /* 00 - 09 */
- 20, 21, 22, 22, 23, 23, 24, 25, 26, 26, /* 10 - 19 */
- 26, 26, 26, 27, 27, 28, 28, 28, 29, 29, /* 20 - 29 */
- 29, 30, 30, 30, 31, 31, 31, 31, 32, 32, /* 30 - 39 */
- 32, 32, 32, 33, 33, 33, 33, 33, 34, 34, /* 40 - 49 */
- 34, 34, 34, 34, 35, 35, 35, 35, 35, 35, /* 50 - 59 */
- 36, 36, 36, 36, 36, 36, 36, 37, 37, 37, /* 60 - 69 */
- 37, 37, 37, 37, 37, 38, 38, 38, 38, 38, /* 70 - 79 */
- 38, 38, 38, 38, 38, 39, 39, 39, 39, 39, /* 80 - 89 */
- 39, 39, 39, 39, 39, 40, 40, 40, 40, 40 /* 90 - 99 */
-};
-
-/* Calculates a relative dB value from a ratio of linear
- * (i.e. not dB) signal levels.
- * Conversion assumes that levels are voltages (20*log), not powers (10*log). */
-int il3945_calc_db_from_ratio(int sig_ratio)
-{
- /* 1000:1 or higher just report as 60 dB */
- if (sig_ratio >= 1000)
- return 60;
-
- /* 100:1 or higher, divide by 10 and use table,
- * add 20 dB to make up for divide by 10 */
- if (sig_ratio >= 100)
- return 20 + (int)ratio2dB[sig_ratio/10];
-
- /* We shouldn't see this */
- if (sig_ratio < 1)
- return 0;
-
- /* Use table for ratios 1:1 - 99:1 */
- return (int)ratio2dB[sig_ratio];
-}
-
-/**
- * il3945_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the il->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void il3945_rx_handle(struct il_priv *il)
-{
- struct il_rx_buf *rxb;
- struct il_rx_pkt *pkt;
- struct il_rx_queue *rxq = &il->rxq;
- u32 r, i;
- int reclaim;
- unsigned long flags;
- u8 fill_rx = 0;
- u32 count = 8;
- int total_empty = 0;
-
- /* uCode's read idx (stored in shared DRAM) indicates the last Rx
- * buffer that the driver may process (last buffer filled by ucode). */
- r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
- i = rxq->read;
-
- /* calculate total frames need to be restock after handling RX */
- total_empty = r - rxq->write_actual;
- if (total_empty < 0)
- total_empty += RX_QUEUE_SIZE;
-
- if (total_empty > (RX_QUEUE_SIZE / 2))
- fill_rx = 1;
- /* Rx interrupt, but nothing sent from uCode */
- if (i == r)
- D_RX("r = %d, i = %d\n", r, i);
-
- while (i != r) {
- int len;
-
- rxb = rxq->queue[i];
-
- /* If an RXB doesn't have a Rx queue slot associated with it,
- * then a bug has been introduced in the queue refilling
- * routines -- catch it here */
- BUG_ON(rxb == NULL);
-
- rxq->queue[i] = NULL;
-
- pci_unmap_page(il->pci_dev, rxb->page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- pkt = rxb_addr(rxb);
-
- len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
- len += sizeof(u32); /* account for status word */
-
- /* Reclaim a command buffer only if this packet is a response
- * to a (driver-originated) command.
- * If the packet (e.g. Rx frame) originated from uCode,
- * there is no command buffer to reclaim.
- * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
- * but apparently a few don't get set; catch them here. */
- reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- pkt->hdr.cmd != STATISTICS_NOTIFICATION &&
- pkt->hdr.cmd != REPLY_TX;
-
- /* Based on type of command response or notification,
- * handle those that need handling via function in
- * rx_handlers table. See il3945_setup_rx_handlers() */
- if (il->rx_handlers[pkt->hdr.cmd]) {
- D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
- il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
- il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
- il->rx_handlers[pkt->hdr.cmd] (il, rxb);
- } else {
- /* No handling needed */
- D_RX(
- "r %d i %d No handler needed for %s, 0x%02x\n",
- r, i, il_get_cmd_string(pkt->hdr.cmd),
- pkt->hdr.cmd);
- }
-
- /*
- * XXX: After here, we should always check rxb->page
- * against NULL before touching it or its virtual
- * memory (pkt). Because some rx_handler might have
- * already taken or freed the pages.
- */
-
- if (reclaim) {
- /* Invoke any callbacks, transfer the buffer to caller,
- * and fire off the (possibly) blocking il_send_cmd()
- * as we reclaim the driver command queue */
- if (rxb->page)
- il_tx_cmd_complete(il, rxb);
- else
- IL_WARN("Claim null rxb?\n");
- }
-
- /* Reuse the page if possible. For notification packets and
- * SKBs that fail to Rx correctly, add them back into the
- * rx_free list for reuse later. */
- spin_lock_irqsave(&rxq->lock, flags);
- if (rxb->page != NULL) {
- rxb->page_dma = pci_map_page(il->pci_dev, rxb->page,
- 0, PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- } else
- list_add_tail(&rxb->list, &rxq->rx_used);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- i = (i + 1) & RX_QUEUE_MASK;
- /* If there are a lot of unused frames,
- * restock the Rx queue so ucode won't assert. */
- if (fill_rx) {
- count++;
- if (count >= 8) {
- rxq->read = i;
- il3945_rx_replenish_now(il);
- count = 0;
- }
- }
- }
-
- /* Backtrack one entry */
- rxq->read = i;
- if (fill_rx)
- il3945_rx_replenish_now(il);
- else
- il3945_rx_queue_restock(il);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void il3945_synchronize_irq(struct il_priv *il)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(il->pci_dev->irq);
- tasklet_kill(&il->irq_tasklet);
-}
-
-static const char *il3945_desc_lookup(int i)
-{
- switch (i) {
- case 1:
- return "FAIL";
- case 2:
- return "BAD_PARAM";
- case 3:
- return "BAD_CHECKSUM";
- case 4:
- return "NMI_INTERRUPT";
- case 5:
- return "SYSASSERT";
- case 6:
- return "FATAL_ERROR";
- }
-
- return "UNKNOWN";
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void il3945_dump_nic_error_log(struct il_priv *il)
-{
- u32 i;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
-
- base = le32_to_cpu(il->card_alive.error_event_table_ptr);
-
- if (!il3945_hw_valid_rtc_data_addr(base)) {
- IL_ERR("Not valid error log pointer 0x%08X\n", base);
- return;
- }
-
-
- count = il_read_targ_mem(il, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IL_ERR("Start IWL Error Log Dump:\n");
- IL_ERR("Status: 0x%08lX, count: %d\n",
- il->status, count);
- }
-
- IL_ERR("Desc Time asrtPC blink2 "
- "ilink1 nmiPC Line\n");
- for (i = ERROR_START_OFFSET;
- i < (count * ERROR_ELEM_SIZE) + ERROR_START_OFFSET;
- i += ERROR_ELEM_SIZE) {
- desc = il_read_targ_mem(il, base + i);
- time =
- il_read_targ_mem(il, base + i + 1 * sizeof(u32));
- blink1 =
- il_read_targ_mem(il, base + i + 2 * sizeof(u32));
- blink2 =
- il_read_targ_mem(il, base + i + 3 * sizeof(u32));
- ilink1 =
- il_read_targ_mem(il, base + i + 4 * sizeof(u32));
- ilink2 =
- il_read_targ_mem(il, base + i + 5 * sizeof(u32));
- data1 =
- il_read_targ_mem(il, base + i + 6 * sizeof(u32));
-
- IL_ERR(
- "%-13s (0x%X) %010u 0x%05X 0x%05X 0x%05X 0x%05X %u\n\n",
- il3945_desc_lookup(desc), desc, time, blink1, blink2,
- ilink1, ilink2, data1);
- }
-}
-
-static void il3945_irq_tasklet(struct il_priv *il)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
-#ifdef CONFIG_IWLEGACY_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&il->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = _il_rd(il, CSR_INT);
- _il_wr(il, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
- _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & IL_DL_ISR) {
- /* just for debug */
- inta_mask = _il_rd(il, CSR_INT_MASK);
- D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR39_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR39_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IL_ERR("Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- il_disable_interrupts(il);
-
- il->isr_stats.hw++;
- il_irq_handle_error(il);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & (IL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- D_ISR("Scheduler finished to transmit "
- "the frame/frames.\n");
- il->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- D_ISR("Alive interrupt\n");
- il->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IL_ERR("Microcode SW error detected. "
- "Restarting 0x%X.\n", inta);
- il->isr_stats.sw++;
- il_irq_handle_error(il);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /* uCode wakes up after power-down sleep */
- if (inta & CSR_INT_BIT_WAKEUP) {
- D_ISR("Wakeup interrupt\n");
- il_rx_queue_update_write_ptr(il, &il->rxq);
- il_txq_update_write_ptr(il, &il->txq[0]);
- il_txq_update_write_ptr(il, &il->txq[1]);
- il_txq_update_write_ptr(il, &il->txq[2]);
- il_txq_update_write_ptr(il, &il->txq[3]);
- il_txq_update_write_ptr(il, &il->txq[4]);
- il_txq_update_write_ptr(il, &il->txq[5]);
-
- il->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- il3945_rx_handle(il);
- il->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- if (inta & CSR_INT_BIT_FH_TX) {
- D_ISR("Tx interrupt\n");
- il->isr_stats.tx++;
-
- _il_wr(il, CSR_FH_INT_STATUS, (1 << 6));
- il_wr(il, FH39_TCSR_CREDIT
- (FH39_SRVC_CHNL), 0x0);
- handled |= CSR_INT_BIT_FH_TX;
- }
-
- if (inta & ~handled) {
- IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
- il->isr_stats.unhandled++;
- }
-
- if (inta & ~il->inta_mask) {
- IL_WARN("Disabled INTA bits 0x%08x were pending\n",
- inta & ~il->inta_mask);
- IL_WARN(" with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &il->status))
- il_enable_interrupts(il);
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & (IL_DL_ISR)) {
- inta = _il_rd(il, CSR_INT);
- inta_mask = _il_rd(il, CSR_INT_MASK);
- inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
- D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
-static int il3945_get_channels_for_scan(struct il_priv *il,
- enum ieee80211_band band,
- u8 is_active, u8 n_probes,
- struct il3945_scan_channel *scan_ch,
- struct ieee80211_vif *vif)
-{
- struct ieee80211_channel *chan;
- const struct ieee80211_supported_band *sband;
- const struct il_channel_info *ch_info;
- u16 passive_dwell = 0;
- u16 active_dwell = 0;
- int added, i;
-
- sband = il_get_hw_mode(il, band);
- if (!sband)
- return 0;
-
- active_dwell = il_get_active_dwell_time(il, band, n_probes);
- passive_dwell = il_get_passive_dwell_time(il, band, vif);
-
- if (passive_dwell <= active_dwell)
- passive_dwell = active_dwell + 1;
-
- for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
- chan = il->scan_request->channels[i];
-
- if (chan->band != band)
- continue;
-
- scan_ch->channel = chan->hw_value;
-
- ch_info = il_get_channel_info(il, band,
- scan_ch->channel);
- if (!il_is_channel_valid(ch_info)) {
- D_SCAN(
- "Channel %d is INVALID for this band.\n",
- scan_ch->channel);
- continue;
- }
-
- scan_ch->active_dwell = cpu_to_le16(active_dwell);
- scan_ch->passive_dwell = cpu_to_le16(passive_dwell);
- /* If passive , set up for auto-switch
- * and use long active_dwell time.
- */
- if (!is_active || il_is_channel_passive(ch_info) ||
- (chan->flags & IEEE80211_CHAN_PASSIVE_SCAN)) {
- scan_ch->type = 0; /* passive */
- if (IL_UCODE_API(il->ucode_ver) == 1)
- scan_ch->active_dwell = cpu_to_le16(passive_dwell - 1);
- } else {
- scan_ch->type = 1; /* active */
- }
-
- /* Set direct probe bits. These may be used both for active
- * scan channels (probes gets sent right away),
- * or for passive channels (probes get se sent only after
- * hearing clear Rx packet).*/
- if (IL_UCODE_API(il->ucode_ver) >= 2) {
- if (n_probes)
- scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
- } else {
- /* uCode v1 does not allow setting direct probe bits on
- * passive channel. */
- if ((scan_ch->type & 1) && n_probes)
- scan_ch->type |= IL39_SCAN_PROBE_MASK(n_probes);
- }
-
- /* Set txpower levels to defaults */
- scan_ch->tpc.dsp_atten = 110;
- /* scan_pwr_info->tpc.dsp_atten; */
-
- /*scan_pwr_info->tpc.tx_gain; */
- if (band == IEEE80211_BAND_5GHZ)
- scan_ch->tpc.tx_gain = ((1 << 5) | (3 << 3)) | 3;
- else {
- scan_ch->tpc.tx_gain = ((1 << 5) | (5 << 3));
- /* NOTE: if we were doing 6Mb OFDM for scans we'd use
- * power level:
- * scan_ch->tpc.tx_gain = ((1 << 5) | (2 << 3)) | 3;
- */
- }
-
- D_SCAN("Scanning %d [%s %d]\n",
- scan_ch->channel,
- (scan_ch->type & 1) ? "ACTIVE" : "PASSIVE",
- (scan_ch->type & 1) ?
- active_dwell : passive_dwell);
-
- scan_ch++;
- added++;
- }
-
- D_SCAN("total channels to scan %d\n", added);
- return added;
-}
-
-static void il3945_init_hw_rates(struct il_priv *il,
- struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < RATE_COUNT_LEGACY; i++) {
- rates[i].bitrate = il3945_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on idxes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if (i > IL39_LAST_OFDM_RATE || i < IL_FIRST_OFDM_RATE) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |= (il3945_rates[i].plcp == 10) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void il3945_dealloc_ucode_pci(struct il_priv *il)
-{
- il_free_fw_desc(il->pci_dev, &il->ucode_code);
- il_free_fw_desc(il->pci_dev, &il->ucode_data);
- il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
- il_free_fw_desc(il->pci_dev, &il->ucode_init);
- il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
- il_free_fw_desc(il->pci_dev, &il->ucode_boot);
-}
-
-/**
- * il3945_verify_inst_full - verify runtime uCode image in card vs. host,
- * looking at all data.
- */
-static int il3945_verify_inst_full(struct il_priv *il, __le32 *image, u32 len)
-{
- u32 val;
- u32 save_len = len;
- int rc = 0;
- u32 errcnt;
-
- D_INFO("ucode inst image size is %u\n", len);
-
- il_wr(il, HBUS_TARG_MEM_RADDR,
- IL39_RTC_INST_LOWER_BOUND);
-
- errcnt = 0;
- for (; len > 0; len -= sizeof(u32), image++) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IL_DL_IO is set */
- val = _il_rd(il, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
- IL_ERR("uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- save_len - len, val, le32_to_cpu(*image));
- rc = -EIO;
- errcnt++;
- if (errcnt >= 20)
- break;
- }
- }
-
-
- if (!errcnt)
- D_INFO(
- "ucode image in INSTRUCTION memory is good\n");
-
- return rc;
-}
-
-
-/**
- * il3945_verify_inst_sparse - verify runtime uCode image in card vs. host,
- * using sample data 100 bytes apart. If these sample points are good,
- * it's a pretty good bet that everything between them is good, too.
- */
-static int il3945_verify_inst_sparse(struct il_priv *il, __le32 *image, u32 len)
-{
- u32 val;
- int rc = 0;
- u32 errcnt = 0;
- u32 i;
-
- D_INFO("ucode inst image size is %u\n", len);
-
- for (i = 0; i < len; i += 100, image += 100/sizeof(u32)) {
- /* read data comes through single port, auto-incr addr */
- /* NOTE: Use the debugless read so we don't flood kernel log
- * if IL_DL_IO is set */
- il_wr(il, HBUS_TARG_MEM_RADDR,
- i + IL39_RTC_INST_LOWER_BOUND);
- val = _il_rd(il, HBUS_TARG_MEM_RDAT);
- if (val != le32_to_cpu(*image)) {
-#if 0 /* Enable this if you want to see details */
- IL_ERR("uCode INST section is invalid at "
- "offset 0x%x, is 0x%x, s/b 0x%x\n",
- i, val, *image);
-#endif
- rc = -EIO;
- errcnt++;
- if (errcnt >= 3)
- break;
- }
- }
-
- return rc;
-}
-
-
-/**
- * il3945_verify_ucode - determine which instruction image is in SRAM,
- * and verify its contents
- */
-static int il3945_verify_ucode(struct il_priv *il)
-{
- __le32 *image;
- u32 len;
- int rc = 0;
-
- /* Try bootstrap */
- image = (__le32 *)il->ucode_boot.v_addr;
- len = il->ucode_boot.len;
- rc = il3945_verify_inst_sparse(il, image, len);
- if (rc == 0) {
- D_INFO("Bootstrap uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try initialize */
- image = (__le32 *)il->ucode_init.v_addr;
- len = il->ucode_init.len;
- rc = il3945_verify_inst_sparse(il, image, len);
- if (rc == 0) {
- D_INFO("Initialize uCode is good in inst SRAM\n");
- return 0;
- }
-
- /* Try runtime/protocol */
- image = (__le32 *)il->ucode_code.v_addr;
- len = il->ucode_code.len;
- rc = il3945_verify_inst_sparse(il, image, len);
- if (rc == 0) {
- D_INFO("Runtime uCode is good in inst SRAM\n");
- return 0;
- }
-
- IL_ERR("NO VALID UCODE IMAGE IN INSTRUCTION SRAM!!\n");
-
- /* Since nothing seems to match, show first several data entries in
- * instruction SRAM, so maybe visual inspection will give a clue.
- * Selection of bootstrap image (vs. other images) is arbitrary. */
- image = (__le32 *)il->ucode_boot.v_addr;
- len = il->ucode_boot.len;
- rc = il3945_verify_inst_full(il, image, len);
-
- return rc;
-}
-
-static void il3945_nic_start(struct il_priv *il)
-{
- /* Remove all resets to allow NIC to operate */
- _il_wr(il, CSR_RESET, 0);
-}
-
-#define IL3945_UCODE_GET(item) \
-static u32 il3945_ucode_get_##item(const struct il_ucode_header *ucode)\
-{ \
- return le32_to_cpu(ucode->v1.item); \
-}
-
-static u32 il3945_ucode_get_header_size(u32 api_ver)
-{
- return 24;
-}
-
-static u8 *il3945_ucode_get_data(const struct il_ucode_header *ucode)
-{
- return (u8 *) ucode->v1.data;
-}
-
-IL3945_UCODE_GET(inst_size);
-IL3945_UCODE_GET(data_size);
-IL3945_UCODE_GET(init_size);
-IL3945_UCODE_GET(init_data_size);
-IL3945_UCODE_GET(boot_size);
-
-/**
- * il3945_read_ucode - Read uCode images from disk file.
- *
- * Copy into buffers for card to fetch via bus-mastering
- */
-static int il3945_read_ucode(struct il_priv *il)
-{
- const struct il_ucode_header *ucode;
- int ret = -EINVAL, idx;
- const struct firmware *ucode_raw;
- /* firmware file name contains uCode/driver compatibility version */
- const char *name_pre = il->cfg->fw_name_pre;
- const unsigned int api_max = il->cfg->ucode_api_max;
- const unsigned int api_min = il->cfg->ucode_api_min;
- char buf[25];
- u8 *src;
- size_t len;
- u32 api_ver, inst_size, data_size, init_size, init_data_size, boot_size;
-
- /* Ask kernel firmware_class module to get the boot firmware off disk.
- * request_firmware() is synchronous, file is in memory on return. */
- for (idx = api_max; idx >= api_min; idx--) {
- sprintf(buf, "%s%u%s", name_pre, idx, ".ucode");
- ret = request_firmware(&ucode_raw, buf, &il->pci_dev->dev);
- if (ret < 0) {
- IL_ERR("%s firmware file req failed: %d\n",
- buf, ret);
- if (ret == -ENOENT)
- continue;
- else
- goto error;
- } else {
- if (idx < api_max)
- IL_ERR("Loaded firmware %s, "
- "which is deprecated. "
- " Please use API v%u instead.\n",
- buf, api_max);
- D_INFO("Got firmware '%s' file "
- "(%zd bytes) from disk\n",
- buf, ucode_raw->size);
- break;
- }
- }
-
- if (ret < 0)
- goto error;
-
- /* Make sure that we got at least our header! */
- if (ucode_raw->size < il3945_ucode_get_header_size(1)) {
- IL_ERR("File size way too small!\n");
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Data from ucode file: header followed by uCode images */
- ucode = (struct il_ucode_header *)ucode_raw->data;
-
- il->ucode_ver = le32_to_cpu(ucode->ver);
- api_ver = IL_UCODE_API(il->ucode_ver);
- inst_size = il3945_ucode_get_inst_size(ucode);
- data_size = il3945_ucode_get_data_size(ucode);
- init_size = il3945_ucode_get_init_size(ucode);
- init_data_size = il3945_ucode_get_init_data_size(ucode);
- boot_size = il3945_ucode_get_boot_size(ucode);
- src = il3945_ucode_get_data(ucode);
-
- /* api_ver should match the api version forming part of the
- * firmware filename ... but we don't check for that and only rely
- * on the API version read from firmware header from here on forward */
-
- if (api_ver < api_min || api_ver > api_max) {
- IL_ERR("Driver unable to support your firmware API. "
- "Driver supports v%u, firmware is v%u.\n",
- api_max, api_ver);
- il->ucode_ver = 0;
- ret = -EINVAL;
- goto err_release;
- }
- if (api_ver != api_max)
- IL_ERR("Firmware has old API version. Expected %u, "
- "got %u. New firmware can be obtained "
- "from http://www.intellinuxwireless.org.\n",
- api_max, api_ver);
-
- IL_INFO("loaded firmware version %u.%u.%u.%u\n",
- IL_UCODE_MAJOR(il->ucode_ver),
- IL_UCODE_MINOR(il->ucode_ver),
- IL_UCODE_API(il->ucode_ver),
- IL_UCODE_SERIAL(il->ucode_ver));
-
- snprintf(il->hw->wiphy->fw_version,
- sizeof(il->hw->wiphy->fw_version),
- "%u.%u.%u.%u",
- IL_UCODE_MAJOR(il->ucode_ver),
- IL_UCODE_MINOR(il->ucode_ver),
- IL_UCODE_API(il->ucode_ver),
- IL_UCODE_SERIAL(il->ucode_ver));
-
- D_INFO("f/w package hdr ucode version raw = 0x%x\n",
- il->ucode_ver);
- D_INFO("f/w package hdr runtime inst size = %u\n",
- inst_size);
- D_INFO("f/w package hdr runtime data size = %u\n",
- data_size);
- D_INFO("f/w package hdr init inst size = %u\n",
- init_size);
- D_INFO("f/w package hdr init data size = %u\n",
- init_data_size);
- D_INFO("f/w package hdr boot inst size = %u\n",
- boot_size);
-
-
- /* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size != il3945_ucode_get_header_size(api_ver) +
- inst_size + data_size + init_size +
- init_data_size + boot_size) {
-
- D_INFO(
- "uCode file size %zd does not match expected size\n",
- ucode_raw->size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Verify that uCode images will fit in card's SRAM */
- if (inst_size > IL39_MAX_INST_SIZE) {
- D_INFO("uCode instr len %d too large to fit in\n",
- inst_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- if (data_size > IL39_MAX_DATA_SIZE) {
- D_INFO("uCode data len %d too large to fit in\n",
- data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_size > IL39_MAX_INST_SIZE) {
- D_INFO(
- "uCode init instr len %d too large to fit in\n",
- init_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (init_data_size > IL39_MAX_DATA_SIZE) {
- D_INFO(
- "uCode init data len %d too large to fit in\n",
- init_data_size);
- ret = -EINVAL;
- goto err_release;
- }
- if (boot_size > IL39_MAX_BSM_SIZE) {
- D_INFO(
- "uCode boot instr len %d too large to fit in\n",
- boot_size);
- ret = -EINVAL;
- goto err_release;
- }
-
- /* Allocate ucode buffers for card's bus-master loading ... */
-
- /* Runtime instructions and 2 copies of data:
- * 1) unmodified from disk
- * 2) backup cache for save/restore during power-downs */
- il->ucode_code.len = inst_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
-
- il->ucode_data.len = data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
-
- il->ucode_data_backup.len = data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
-
- if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
- !il->ucode_data_backup.v_addr)
- goto err_pci_alloc;
-
- /* Initialization instructions and data */
- if (init_size && init_data_size) {
- il->ucode_init.len = init_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
-
- il->ucode_init_data.len = init_data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
-
- if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
- goto err_pci_alloc;
- }
-
- /* Bootstrap (instructions only, no data) */
- if (boot_size) {
- il->ucode_boot.len = boot_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
-
- if (!il->ucode_boot.v_addr)
- goto err_pci_alloc;
- }
-
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- len = inst_size;
- D_INFO(
- "Copying (but not loading) uCode instr len %zd\n", len);
- memcpy(il->ucode_code.v_addr, src, len);
- src += len;
-
- D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- il->ucode_code.v_addr, (u32)il->ucode_code.p_addr);
-
- /* Runtime data (2nd block)
- * NOTE: Copy into backup buffer will be done in il3945_up() */
- len = data_size;
- D_INFO(
- "Copying (but not loading) uCode data len %zd\n", len);
- memcpy(il->ucode_data.v_addr, src, len);
- memcpy(il->ucode_data_backup.v_addr, src, len);
- src += len;
-
- /* Initialization instructions (3rd block) */
- if (init_size) {
- len = init_size;
- D_INFO(
- "Copying (but not loading) init instr len %zd\n", len);
- memcpy(il->ucode_init.v_addr, src, len);
- src += len;
- }
-
- /* Initialization data (4th block) */
- if (init_data_size) {
- len = init_data_size;
- D_INFO(
- "Copying (but not loading) init data len %zd\n", len);
- memcpy(il->ucode_init_data.v_addr, src, len);
- src += len;
- }
-
- /* Bootstrap instructions (5th block) */
- len = boot_size;
- D_INFO(
- "Copying (but not loading) boot instr len %zd\n", len);
- memcpy(il->ucode_boot.v_addr, src, len);
-
- /* We have our copies now, allow OS release its copies */
- release_firmware(ucode_raw);
- return 0;
-
- err_pci_alloc:
- IL_ERR("failed to allocate pci memory\n");
- ret = -ENOMEM;
- il3945_dealloc_ucode_pci(il);
-
- err_release:
- release_firmware(ucode_raw);
-
- error:
- return ret;
-}
-
-
-/**
- * il3945_set_ucode_ptrs - Set uCode address location
- *
- * Tell initialization uCode where to find runtime uCode.
- *
- * BSM registers initially contain pointers to initialization uCode.
- * We need to replace them to load runtime uCode inst and data,
- * and to save runtime data when powering down.
- */
-static int il3945_set_ucode_ptrs(struct il_priv *il)
-{
- dma_addr_t pinst;
- dma_addr_t pdata;
-
- /* bits 31:0 for 3945 */
- pinst = il->ucode_code.p_addr;
- pdata = il->ucode_data_backup.p_addr;
-
- /* Tell bootstrap uCode where to find image to load */
- il_wr_prph(il, BSM_DRAM_INST_PTR_REG, pinst);
- il_wr_prph(il, BSM_DRAM_DATA_PTR_REG, pdata);
- il_wr_prph(il, BSM_DRAM_DATA_BYTECOUNT_REG,
- il->ucode_data.len);
-
- /* Inst byte count must be last to set up, bit 31 signals uCode
- * that all new ptr/size info is in place */
- il_wr_prph(il, BSM_DRAM_INST_BYTECOUNT_REG,
- il->ucode_code.len | BSM_DRAM_INST_LOAD);
-
- D_INFO("Runtime uCode pointers are set.\n");
-
- return 0;
-}
-
-/**
- * il3945_init_alive_start - Called after REPLY_ALIVE notification received
- *
- * Called after REPLY_ALIVE notification received from "initialize" uCode.
- *
- * Tell "initialize" uCode to go ahead and load the runtime uCode.
- */
-static void il3945_init_alive_start(struct il_priv *il)
-{
- /* Check alive response for "valid" sign from uCode */
- if (il->card_alive_init.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- D_INFO("Initialize Alive failed.\n");
- goto restart;
- }
-
- /* Bootstrap uCode has loaded initialize uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "initialize" alive if code weren't properly loaded. */
- if (il3945_verify_ucode(il)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- D_INFO("Bad \"initialize\" uCode load.\n");
- goto restart;
- }
-
- /* Send pointers to protocol/runtime uCode image ... init code will
- * load and launch runtime uCode, which will send us another "Alive"
- * notification. */
- D_INFO("Initialization Alive received.\n");
- if (il3945_set_ucode_ptrs(il)) {
- /* Runtime instruction load won't happen;
- * take it all the way back down so we can try again */
- D_INFO("Couldn't set up uCode pointers.\n");
- goto restart;
- }
- return;
-
- restart:
- queue_work(il->workqueue, &il->restart);
-}
-
-/**
- * il3945_alive_start - called after REPLY_ALIVE notification received
- * from protocol/runtime uCode (initialization uCode's
- * Alive gets handled by il3945_init_alive_start()).
- */
-static void il3945_alive_start(struct il_priv *il)
-{
- int thermal_spin = 0;
- u32 rfkill;
- struct il_rxon_context *ctx = &il->ctx;
-
- D_INFO("Runtime Alive received.\n");
-
- if (il->card_alive.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- D_INFO("Alive failed.\n");
- goto restart;
- }
-
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (il3945_verify_ucode(il)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- D_INFO("Bad runtime uCode load.\n");
- goto restart;
- }
-
- rfkill = il_rd_prph(il, APMG_RFKILL_REG);
- D_INFO("RFKILL status: 0x%x\n", rfkill);
-
- if (rfkill & 0x1) {
- clear_bit(STATUS_RF_KILL_HW, &il->status);
- /* if RFKILL is not on, then wait for thermal
- * sensor in adapter to kick in */
- while (il3945_hw_get_temperature(il) == 0) {
- thermal_spin++;
- udelay(10);
- }
-
- if (thermal_spin)
- D_INFO("Thermal calibration took %dus\n",
- thermal_spin * 10);
- } else
- set_bit(STATUS_RF_KILL_HW, &il->status);
-
- /* After the ALIVE response, we can send commands to 3945 uCode */
- set_bit(STATUS_ALIVE, &il->status);
-
- /* Enable watchdog to monitor the driver tx queues */
- il_setup_watchdog(il);
-
- if (il_is_rfkill(il))
- return;
-
- ieee80211_wake_queues(il->hw);
-
- il->active_rate = RATES_MASK_3945;
-
- il_power_update_mode(il, true);
-
- if (il_is_associated(il)) {
- struct il3945_rxon_cmd *active_rxon =
- (struct il3945_rxon_cmd *)(&ctx->active);
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- } else {
- /* Initialize our rx_config data */
- il_connection_init_rx_config(il, ctx);
- }
-
- /* Configure Bluetooth device coexistence support */
- il_send_bt_config(il);
-
- set_bit(STATUS_READY, &il->status);
-
- /* Configure the adapter for unassociated operation */
- il3945_commit_rxon(il, ctx);
-
- il3945_reg_txpower_periodic(il);
-
- D_INFO("ALIVE processing complete.\n");
- wake_up(&il->wait_command_queue);
-
- return;
-
- restart:
- queue_work(il->workqueue, &il->restart);
-}
-
-static void il3945_cancel_deferred_work(struct il_priv *il);
-
-static void __il3945_down(struct il_priv *il)
-{
- unsigned long flags;
- int exit_pending;
-
- D_INFO(DRV_NAME " is going down\n");
-
- il_scan_cancel_timeout(il, 200);
-
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
- * to prevent rearm timer */
- del_timer_sync(&il->watchdog);
-
- /* Station information will now be cleared in device */
- il_clear_ucode_stations(il, NULL);
- il_dealloc_bcast_stations(il);
- il_clear_driver_stations(il);
-
- /* Unblock any waiting calls */
- wake_up_all(&il->wait_command_queue);
-
- /* Wipe out the EXIT_PENDING status bit if we are not actually
- * exiting the module */
- if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* stop and reset the on-board processor */
- _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
- il3945_synchronize_irq(il);
-
- if (il->mac80211_registered)
- ieee80211_stop_queues(il->hw);
-
- /* If we have not previously called il3945_init() then
- * clear all bits but the RF Kill bits and return */
- if (!il_is_init(il)) {
- il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
- il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &il->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
-
- il3945_hw_txq_ctx_stop(il);
- il3945_hw_rxq_stop(il);
-
- /* Power-down device's busmaster DMA clocks */
- il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Stop the device, and put it in low power state */
- il_apm_stop(il);
-
- exit:
- memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
-
- if (il->beacon_skb)
- dev_kfree_skb(il->beacon_skb);
- il->beacon_skb = NULL;
-
- /* clear out any free frames */
- il3945_clear_free_frames(il);
-}
-
-static void il3945_down(struct il_priv *il)
-{
- mutex_lock(&il->mutex);
- __il3945_down(il);
- mutex_unlock(&il->mutex);
-
- il3945_cancel_deferred_work(il);
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int il3945_alloc_bcast_station(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
- unsigned long flags;
- u8 sta_id;
-
- spin_lock_irqsave(&il->sta_lock, flags);
- sta_id = il_prep_station(il, ctx,
- il_bcast_addr, false, NULL);
- if (sta_id == IL_INVALID_STATION) {
- IL_ERR("Unable to prepare broadcast station\n");
- spin_unlock_irqrestore(&il->sta_lock, flags);
-
- return -EINVAL;
- }
-
- il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
- il->stations[sta_id].used |= IL_STA_BCAST;
- spin_unlock_irqrestore(&il->sta_lock, flags);
-
- return 0;
-}
-
-static int __il3945_up(struct il_priv *il)
-{
- int rc, i;
-
- rc = il3945_alloc_bcast_station(il);
- if (rc)
- return rc;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
- IL_WARN("Exit pending; will not bring the NIC up\n");
- return -EIO;
- }
-
- if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
- IL_ERR("ucode not available for device bring up\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (_il_rd(il, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
- else {
- set_bit(STATUS_RF_KILL_HW, &il->status);
- IL_WARN("Radio disabled by HW RF Kill switch\n");
- return -ENODEV;
- }
-
- _il_wr(il, CSR_INT, 0xFFFFFFFF);
-
- rc = il3945_hw_nic_init(il);
- if (rc) {
- IL_ERR("Unable to int nic\n");
- return rc;
- }
-
- /* make sure rfkill handshake bits are cleared */
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- _il_wr(il, CSR_INT, 0xFFFFFFFF);
- il_enable_interrupts(il);
-
- /* really make sure rfkill handshake bits are cleared */
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Copy original ucode data image from disk into backup cache.
- * This will be used to initialize the on-board processor's
- * data SRAM for a clean start when the runtime program first loads. */
- memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
- il->ucode_data.len);
-
- /* We return success when we resume from suspend and rf_kill is on. */
- if (test_bit(STATUS_RF_KILL_HW, &il->status))
- return 0;
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- rc = il->cfg->ops->lib->load_ucode(il);
-
- if (rc) {
- IL_ERR(
- "Unable to set up bootstrap uCode: %d\n", rc);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- il3945_nic_start(il);
-
- D_INFO(DRV_NAME " is coming up\n");
-
- return 0;
- }
-
- set_bit(STATUS_EXIT_PENDING, &il->status);
- __il3945_down(il);
- clear_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IL_ERR("Unable to initialize device after %d attempts.\n", i);
- return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void il3945_bg_init_alive_start(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, init_alive_start.work);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- goto out;
-
- il3945_init_alive_start(il);
-out:
- mutex_unlock(&il->mutex);
-}
-
-static void il3945_bg_alive_start(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, alive_start.work);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- goto out;
-
- il3945_alive_start(il);
-out:
- mutex_unlock(&il->mutex);
-}
-
-/*
- * 3945 cannot interrupt driver when hardware rf kill switch toggles;
- * driver must poll CSR_GP_CNTRL_REG register for change. This register
- * *is* readable even when device has been SW_RESET into low power mode
- * (e.g. during RF KILL).
- */
-static void il3945_rfkill_poll(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, _3945.rfkill_poll.work);
- bool old_rfkill = test_bit(STATUS_RF_KILL_HW, &il->status);
- bool new_rfkill = !(_il_rd(il, CSR_GP_CNTRL)
- & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW);
-
- if (new_rfkill != old_rfkill) {
- if (new_rfkill)
- set_bit(STATUS_RF_KILL_HW, &il->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
-
- wiphy_rfkill_set_hw_state(il->hw->wiphy, new_rfkill);
-
- D_RF_KILL("RF_KILL bit toggled to %s.\n",
- new_rfkill ? "disable radio" : "enable radio");
- }
-
- /* Keep this running, even if radio now enabled. This will be
- * cancelled in mac_start() if system decides to start again */
- queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
-}
-
-int il3945_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
-{
- struct il_host_cmd cmd = {
- .id = REPLY_SCAN_CMD,
- .len = sizeof(struct il3945_scan_cmd),
- .flags = CMD_SIZE_HUGE,
- };
- struct il3945_scan_cmd *scan;
- u8 n_probes = 0;
- enum ieee80211_band band;
- bool is_active = false;
- int ret;
- u16 len;
-
- lockdep_assert_held(&il->mutex);
-
- if (!il->scan_cmd) {
- il->scan_cmd = kmalloc(sizeof(struct il3945_scan_cmd) +
- IL_MAX_SCAN_SIZE, GFP_KERNEL);
- if (!il->scan_cmd) {
- D_SCAN("Fail to allocate scan memory\n");
- return -ENOMEM;
- }
- }
- scan = il->scan_cmd;
- memset(scan, 0, sizeof(struct il3945_scan_cmd) + IL_MAX_SCAN_SIZE);
-
- scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
- scan->quiet_time = IL_ACTIVE_QUIET_TIME;
-
- if (il_is_associated(il)) {
- u16 interval;
- u32 extra;
- u32 suspend_time = 100;
- u32 scan_suspend_time = 100;
-
- D_INFO("Scanning while associated...\n");
-
- interval = vif->bss_conf.beacon_int;
-
- scan->suspend_time = 0;
- scan->max_out_time = cpu_to_le32(200 * 1024);
- if (!interval)
- interval = suspend_time;
- /*
- * suspend time format:
- * 0-19: beacon interval in usec (time before exec.)
- * 20-23: 0
- * 24-31: number of beacons (suspend between channels)
- */
-
- extra = (suspend_time / interval) << 24;
- scan_suspend_time = 0xFF0FFFFF &
- (extra | ((suspend_time % interval) * 1024));
-
- scan->suspend_time = cpu_to_le32(scan_suspend_time);
- D_SCAN("suspend_time 0x%X beacon interval %d\n",
- scan_suspend_time, interval);
- }
-
- if (il->scan_request->n_ssids) {
- int i, p = 0;
- D_SCAN("Kicking off active scan\n");
- for (i = 0; i < il->scan_request->n_ssids; i++) {
- /* always does wildcard anyway */
- if (!il->scan_request->ssids[i].ssid_len)
- continue;
- scan->direct_scan[p].id = WLAN_EID_SSID;
- scan->direct_scan[p].len =
- il->scan_request->ssids[i].ssid_len;
- memcpy(scan->direct_scan[p].ssid,
- il->scan_request->ssids[i].ssid,
- il->scan_request->ssids[i].ssid_len);
- n_probes++;
- p++;
- }
- is_active = true;
- } else
- D_SCAN("Kicking off passive scan.\n");
-
- /* We don't build a direct scan probe request; the uCode will do
- * that based on the direct_mask added to each channel entry */
- scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
- scan->tx_cmd.sta_id = il->ctx.bcast_sta_id;
- scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
-
- /* flags + rate selection */
-
- switch (il->scan_band) {
- case IEEE80211_BAND_2GHZ:
- scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
- scan->tx_cmd.rate = RATE_1M_PLCP;
- band = IEEE80211_BAND_2GHZ;
- break;
- case IEEE80211_BAND_5GHZ:
- scan->tx_cmd.rate = RATE_6M_PLCP;
- band = IEEE80211_BAND_5GHZ;
- break;
- default:
- IL_WARN("Invalid scan band\n");
- return -EIO;
- }
-
- /*
- * If active scaning is requested but a certain channel
- * is marked passive, we can do active scanning if we
- * detect transmissions.
- */
- scan->good_CRC_th = is_active ? IL_GOOD_CRC_TH_DEFAULT :
- IL_GOOD_CRC_TH_DISABLED;
-
- len = il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
- vif->addr, il->scan_request->ie,
- il->scan_request->ie_len,
- IL_MAX_SCAN_SIZE - sizeof(*scan));
- scan->tx_cmd.len = cpu_to_le16(len);
-
- /* select Rx antennas */
- scan->flags |= il3945_get_antenna_flags(il);
-
- scan->channel_count = il3945_get_channels_for_scan(il, band, is_active, n_probes,
- (void *)&scan->data[len], vif);
- if (scan->channel_count == 0) {
- D_SCAN("channel count %d\n", scan->channel_count);
- return -EIO;
- }
-
- cmd.len += le16_to_cpu(scan->tx_cmd.len) +
- scan->channel_count * sizeof(struct il3945_scan_channel);
- cmd.data = scan;
- scan->len = cpu_to_le16(cmd.len);
-
- set_bit(STATUS_SCAN_HW, &il->status);
- ret = il_send_cmd_sync(il, &cmd);
- if (ret)
- clear_bit(STATUS_SCAN_HW, &il->status);
- return ret;
-}
-
-void il3945_post_scan(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
-
- /*
- * Since setting the RXON may have been deferred while
- * performing the scan, fire one off if needed
- */
- if (memcmp(&ctx->staging, &ctx->active, sizeof(ctx->staging)))
- il3945_commit_rxon(il, ctx);
-}
-
-static void il3945_bg_restart(struct work_struct *data)
-{
- struct il_priv *il = container_of(data, struct il_priv, restart);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
- mutex_lock(&il->mutex);
- il->ctx.vif = NULL;
- il->is_open = 0;
- mutex_unlock(&il->mutex);
- il3945_down(il);
- ieee80211_restart_hw(il->hw);
- } else {
- il3945_down(il);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
- mutex_unlock(&il->mutex);
- return;
- }
-
- __il3945_up(il);
- mutex_unlock(&il->mutex);
- }
-}
-
-static void il3945_bg_rx_replenish(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, rx_replenish);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- goto out;
-
- il3945_rx_replenish(il);
-out:
- mutex_unlock(&il->mutex);
-}
-
-void il3945_post_associate(struct il_priv *il)
-{
- int rc = 0;
- struct ieee80211_conf *conf = NULL;
- struct il_rxon_context *ctx = &il->ctx;
-
- if (!ctx->vif || !il->is_open)
- return;
-
- D_ASSOC("Associated as %d to: %pM\n",
- ctx->vif->bss_conf.aid, ctx->active.bssid_addr);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- il_scan_cancel_timeout(il, 200);
-
- conf = il_ieee80211_get_hw_conf(il->hw);
-
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- il3945_commit_rxon(il, ctx);
-
- rc = il_send_rxon_timing(il, ctx);
- if (rc)
- IL_WARN("REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
-
- ctx->staging.assoc_id = cpu_to_le16(ctx->vif->bss_conf.aid);
-
- D_ASSOC("assoc id %d beacon interval %d\n",
- ctx->vif->bss_conf.aid, ctx->vif->bss_conf.beacon_int);
-
- if (ctx->vif->bss_conf.use_short_preamble)
- ctx->staging.flags |= RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (ctx->vif->bss_conf.use_short_slot)
- ctx->staging.flags |= RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &= ~RXON_FLG_SHORT_SLOT_MSK;
- }
-
- il3945_commit_rxon(il, ctx);
-
- switch (ctx->vif->type) {
- case NL80211_IFTYPE_STATION:
- il3945_rate_scale_init(il->hw, IL_AP_ID);
- break;
- case NL80211_IFTYPE_ADHOC:
- il3945_send_beacon_cmd(il);
- break;
- default:
- IL_ERR("%s Should not be called in %d mode\n",
- __func__, ctx->vif->type);
- break;
- }
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT (2 * HZ)
-
-static int il3945_mac_start(struct ieee80211_hw *hw)
-{
- struct il_priv *il = hw->priv;
- int ret;
-
- D_MAC80211("enter\n");
-
- /* we should be verifying the device is ready to be opened */
- mutex_lock(&il->mutex);
-
- /* fetch ucode file from disk, alloc and copy to bus-master buffers ...
- * ucode filename and max sizes are card-specific. */
-
- if (!il->ucode_code.len) {
- ret = il3945_read_ucode(il);
- if (ret) {
- IL_ERR("Could not read microcode: %d\n", ret);
- mutex_unlock(&il->mutex);
- goto out_release_irq;
- }
- }
-
- ret = __il3945_up(il);
-
- mutex_unlock(&il->mutex);
-
- if (ret)
- goto out_release_irq;
-
- D_INFO("Start UP work.\n");
-
- /* Wait for START_ALIVE from ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_timeout(il->wait_command_queue,
- test_bit(STATUS_READY, &il->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &il->status)) {
- IL_ERR(
- "Wait for START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- ret = -ETIMEDOUT;
- goto out_release_irq;
- }
- }
-
- /* ucode is running and will send rfkill notifications,
- * no need to poll the killswitch state anymore */
- cancel_delayed_work(&il->_3945.rfkill_poll);
-
- il->is_open = 1;
- D_MAC80211("leave\n");
- return 0;
-
-out_release_irq:
- il->is_open = 0;
- D_MAC80211("leave - failed\n");
- return ret;
-}
-
-static void il3945_mac_stop(struct ieee80211_hw *hw)
-{
- struct il_priv *il = hw->priv;
-
- D_MAC80211("enter\n");
-
- if (!il->is_open) {
- D_MAC80211("leave - skip\n");
- return;
- }
-
- il->is_open = 0;
-
- il3945_down(il);
-
- flush_workqueue(il->workqueue);
-
- /* start polling the killswitch state again */
- queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
- round_jiffies_relative(2 * HZ));
-
- D_MAC80211("leave\n");
-}
-
-static void il3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct il_priv *il = hw->priv;
-
- D_MAC80211("enter\n");
-
- D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
- ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
- if (il3945_tx_skb(il, skb))
- dev_kfree_skb_any(skb);
-
- D_MAC80211("leave\n");
-}
-
-void il3945_config_ap(struct il_priv *il)
-{
- struct il_rxon_context *ctx = &il->ctx;
- struct ieee80211_vif *vif = ctx->vif;
- int rc = 0;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- /* The following should be done only at AP bring up */
- if (!(il_is_associated(il))) {
-
- /* RXON - unassoc (to set timing command) */
- ctx->staging.filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- il3945_commit_rxon(il, ctx);
-
- /* RXON Timing */
- rc = il_send_rxon_timing(il, ctx);
- if (rc)
- IL_WARN("REPLY_RXON_TIMING failed - "
- "Attempting to continue.\n");
-
- ctx->staging.assoc_id = 0;
-
- if (vif->bss_conf.use_short_preamble)
- ctx->staging.flags |=
- RXON_FLG_SHORT_PREAMBLE_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_PREAMBLE_MSK;
-
- if (ctx->staging.flags & RXON_FLG_BAND_24G_MSK) {
- if (vif->bss_conf.use_short_slot)
- ctx->staging.flags |=
- RXON_FLG_SHORT_SLOT_MSK;
- else
- ctx->staging.flags &=
- ~RXON_FLG_SHORT_SLOT_MSK;
- }
- /* restore RXON assoc */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- il3945_commit_rxon(il, ctx);
- }
- il3945_send_beacon_cmd(il);
-}
-
-static int il3945_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct il_priv *il = hw->priv;
- int ret = 0;
- u8 sta_id = IL_INVALID_STATION;
- u8 static_key;
-
- D_MAC80211("enter\n");
-
- if (il3945_mod_params.sw_crypto) {
- D_MAC80211("leave - hwcrypto disabled\n");
- return -EOPNOTSUPP;
- }
-
- /*
- * To support IBSS RSN, don't program group keys in IBSS, the
- * hardware will then not attempt to decrypt the frames.
- */
- if (vif->type == NL80211_IFTYPE_ADHOC &&
- !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE))
- return -EOPNOTSUPP;
-
- static_key = !il_is_associated(il);
-
- if (!static_key) {
- sta_id = il_sta_id_or_broadcast(
- il, &il->ctx, sta);
- if (sta_id == IL_INVALID_STATION)
- return -EINVAL;
- }
-
- mutex_lock(&il->mutex);
- il_scan_cancel_timeout(il, 100);
-
- switch (cmd) {
- case SET_KEY:
- if (static_key)
- ret = il3945_set_static_key(il, key);
- else
- ret = il3945_set_dynamic_key(il, key, sta_id);
- D_MAC80211("enable hwcrypto key\n");
- break;
- case DISABLE_KEY:
- if (static_key)
- ret = il3945_remove_static_key(il);
- else
- ret = il3945_clear_sta_key_info(il, sta_id);
- D_MAC80211("disable hwcrypto key\n");
- break;
- default:
- ret = -EINVAL;
- }
-
- mutex_unlock(&il->mutex);
- D_MAC80211("leave\n");
-
- return ret;
-}
-
-static int il3945_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
-{
- struct il_priv *il = hw->priv;
- struct il3945_sta_priv *sta_priv = (void *)sta->drv_priv;
- int ret;
- bool is_ap = vif->type == NL80211_IFTYPE_STATION;
- u8 sta_id;
-
- D_INFO("received request to add station %pM\n",
- sta->addr);
- mutex_lock(&il->mutex);
- D_INFO("proceeding to add station %pM\n",
- sta->addr);
- sta_priv->common.sta_id = IL_INVALID_STATION;
-
-
- ret = il_add_station_common(il,
- &il->ctx,
- sta->addr, is_ap, sta, &sta_id);
- if (ret) {
- IL_ERR("Unable to add station %pM (%d)\n",
- sta->addr, ret);
- /* Should we return success if return code is EEXIST ? */
- mutex_unlock(&il->mutex);
- return ret;
- }
-
- sta_priv->common.sta_id = sta_id;
-
- /* Initialize rate scaling */
- D_INFO("Initializing rate scaling for station %pM\n",
- sta->addr);
- il3945_rs_rate_init(il, sta, sta_id);
- mutex_unlock(&il->mutex);
-
- return 0;
-}
-
-static void il3945_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
-{
- struct il_priv *il = hw->priv;
- __le32 filter_or = 0, filter_nand = 0;
- struct il_rxon_context *ctx = &il->ctx;
-
-#define CHK(test, flag) do { \
- if (*total_flags & (test)) \
- filter_or |= (flag); \
- else \
- filter_nand |= (flag); \
- } while (0)
-
- D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
- changed_flags, *total_flags);
-
- CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
- CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK);
- CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
-
-#undef CHK
-
- mutex_lock(&il->mutex);
-
- ctx->staging.filter_flags &= ~filter_nand;
- ctx->staging.filter_flags |= filter_or;
-
- /*
- * Not committing directly because hardware can perform a scan,
- * but even if hw is ready, committing here breaks for some reason,
- * we'll eventually commit the filter flags change anyway.
- */
-
- mutex_unlock(&il->mutex);
-
- /*
- * Receiving all multicast frames is always enabled by the
- * default flags setup in il_connection_init_rx_config()
- * since we currently do not support programming multicast
- * filters into the device.
- */
- *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
- FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/bus/pci/drivers/iwl/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t il3945_show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
-}
-static ssize_t il3945_store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IL_INFO("%s is not in hex or decimal form.\n", buf);
- else {
- il->debug_level = val;
- if (il_alloc_traffic_mem(il))
- IL_ERR(
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- il3945_show_debug_level, il3945_store_debug_level);
-
-#endif /* CONFIG_IWLEGACY_DEBUG */
-
-static ssize_t il3945_show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
-
- if (!il_is_alive(il))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", il3945_hw_get_temperature(il));
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, il3945_show_temperature, NULL);
-
-static ssize_t il3945_show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- return sprintf(buf, "%d\n", il->tx_power_user_lmt);
-}
-
-static ssize_t il3945_store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- char *p = (char *)buf;
- u32 val;
-
- val = simple_strtoul(p, &p, 10);
- if (p == buf)
- IL_INFO(": %s is not in decimal form.\n", buf);
- else
- il3945_hw_reg_set_txpower(il, val);
-
- return count;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO, il3945_show_tx_power, il3945_store_tx_power);
-
-static ssize_t il3945_show_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- struct il_rxon_context *ctx = &il->ctx;
-
- return sprintf(buf, "0x%04X\n", ctx->active.flags);
-}
-
-static ssize_t il3945_store_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- u32 flags = simple_strtoul(buf, NULL, 0);
- struct il_rxon_context *ctx = &il->ctx;
-
- mutex_lock(&il->mutex);
- if (le32_to_cpu(ctx->staging.flags) != flags) {
- /* Cancel any currently running scans... */
- if (il_scan_cancel_timeout(il, 100))
- IL_WARN("Could not cancel scan.\n");
- else {
- D_INFO("Committing rxon.flags = 0x%04X\n",
- flags);
- ctx->staging.flags = cpu_to_le32(flags);
- il3945_commit_rxon(il, ctx);
- }
- }
- mutex_unlock(&il->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(flags, S_IWUSR | S_IRUGO, il3945_show_flags, il3945_store_flags);
-
-static ssize_t il3945_show_filter_flags(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- struct il_rxon_context *ctx = &il->ctx;
-
- return sprintf(buf, "0x%04X\n",
- le32_to_cpu(ctx->active.filter_flags));
-}
-
-static ssize_t il3945_store_filter_flags(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- struct il_rxon_context *ctx = &il->ctx;
- u32 filter_flags = simple_strtoul(buf, NULL, 0);
-
- mutex_lock(&il->mutex);
- if (le32_to_cpu(ctx->staging.filter_flags) != filter_flags) {
- /* Cancel any currently running scans... */
- if (il_scan_cancel_timeout(il, 100))
- IL_WARN("Could not cancel scan.\n");
- else {
- D_INFO("Committing rxon.filter_flags = "
- "0x%04X\n", filter_flags);
- ctx->staging.filter_flags =
- cpu_to_le32(filter_flags);
- il3945_commit_rxon(il, ctx);
- }
- }
- mutex_unlock(&il->mutex);
-
- return count;
-}
-
-static DEVICE_ATTR(filter_flags, S_IWUSR | S_IRUGO, il3945_show_filter_flags,
- il3945_store_filter_flags);
-
-static ssize_t il3945_show_measurement(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- struct il_spectrum_notification measure_report;
- u32 size = sizeof(measure_report), len = 0, ofs = 0;
- u8 *data = (u8 *)&measure_report;
- unsigned long flags;
-
- spin_lock_irqsave(&il->lock, flags);
- if (!(il->measurement_status & MEASUREMENT_READY)) {
- spin_unlock_irqrestore(&il->lock, flags);
- return 0;
- }
- memcpy(&measure_report, &il->measure_report, size);
- il->measurement_status = 0;
- spin_unlock_irqrestore(&il->lock, flags);
-
- while (size && PAGE_SIZE - len) {
- hex_dump_to_buffer(data + ofs, size, 16, 1, buf + len,
- PAGE_SIZE - len, 1);
- len = strlen(buf);
- if (PAGE_SIZE - len)
- buf[len++] = '\n';
-
- ofs += 16;
- size -= min(size, 16U);
- }
-
- return len;
-}
-
-static ssize_t il3945_store_measurement(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- struct il_rxon_context *ctx = &il->ctx;
- struct ieee80211_measurement_params params = {
- .channel = le16_to_cpu(ctx->active.channel),
- .start_time = cpu_to_le64(il->_3945.last_tsf),
- .duration = cpu_to_le16(1),
- };
- u8 type = IL_MEASURE_BASIC;
- u8 buffer[32];
- u8 channel;
-
- if (count) {
- char *p = buffer;
- strncpy(buffer, buf, min(sizeof(buffer), count));
- channel = simple_strtoul(p, NULL, 0);
- if (channel)
- params.channel = channel;
-
- p = buffer;
- while (*p && *p != ' ')
- p++;
- if (*p)
- type = simple_strtoul(p + 1, NULL, 0);
- }
-
- D_INFO("Invoking measurement of type %d on "
- "channel %d (for '%s')\n", type, params.channel, buf);
- il3945_get_measurement(il, ¶ms, type);
-
- return count;
-}
-
-static DEVICE_ATTR(measurement, S_IRUSR | S_IWUSR,
- il3945_show_measurement, il3945_store_measurement);
-
-static ssize_t il3945_store_retry_rate(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
-
- il->retry_rate = simple_strtoul(buf, NULL, 0);
- if (il->retry_rate <= 0)
- il->retry_rate = 1;
-
- return count;
-}
-
-static ssize_t il3945_show_retry_rate(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- return sprintf(buf, "%d", il->retry_rate);
-}
-
-static DEVICE_ATTR(retry_rate, S_IWUSR | S_IRUSR, il3945_show_retry_rate,
- il3945_store_retry_rate);
-
-
-static ssize_t il3945_show_channels(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- /* all this shit doesn't belong into sysfs anyway */
- return 0;
-}
-
-static DEVICE_ATTR(channels, S_IRUSR, il3945_show_channels, NULL);
-
-static ssize_t il3945_show_antenna(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
-
- if (!il_is_alive(il))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", il3945_mod_params.antenna);
-}
-
-static ssize_t il3945_store_antenna(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il __maybe_unused = dev_get_drvdata(d);
- int ant;
-
- if (count == 0)
- return 0;
-
- if (sscanf(buf, "%1i", &ant) != 1) {
- D_INFO("not in hex or decimal form.\n");
- return count;
- }
-
- if (ant >= 0 && ant <= 2) {
- D_INFO("Setting antenna select to %d.\n", ant);
- il3945_mod_params.antenna = (enum il3945_antenna)ant;
- } else
- D_INFO("Bad antenna select value %d.\n", ant);
-
-
- return count;
-}
-
-static DEVICE_ATTR(antenna, S_IWUSR | S_IRUGO, il3945_show_antenna, il3945_store_antenna);
-
-static ssize_t il3945_show_status(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- if (!il_is_alive(il))
- return -EAGAIN;
- return sprintf(buf, "0x%08x\n", (int)il->status);
-}
-
-static DEVICE_ATTR(status, S_IRUGO, il3945_show_status, NULL);
-
-static ssize_t il3945_dump_error_log(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- char *p = (char *)buf;
-
- if (p[0] == '1')
- il3945_dump_nic_error_log(il);
-
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(dump_errors, S_IWUSR, NULL, il3945_dump_error_log);
-
-/*****************************************************************************
- *
- * driver setup and tear down
- *
- *****************************************************************************/
-
-static void il3945_setup_deferred_work(struct il_priv *il)
-{
- il->workqueue = create_singlethread_workqueue(DRV_NAME);
-
- init_waitqueue_head(&il->wait_command_queue);
-
- INIT_WORK(&il->restart, il3945_bg_restart);
- INIT_WORK(&il->rx_replenish, il3945_bg_rx_replenish);
- INIT_DELAYED_WORK(&il->init_alive_start, il3945_bg_init_alive_start);
- INIT_DELAYED_WORK(&il->alive_start, il3945_bg_alive_start);
- INIT_DELAYED_WORK(&il->_3945.rfkill_poll, il3945_rfkill_poll);
-
- il_setup_scan_deferred_work(il);
-
- il3945_hw_setup_deferred_work(il);
-
- init_timer(&il->watchdog);
- il->watchdog.data = (unsigned long)il;
- il->watchdog.function = il_bg_watchdog;
-
- tasklet_init(&il->irq_tasklet, (void (*)(unsigned long))
- il3945_irq_tasklet, (unsigned long)il);
-}
-
-static void il3945_cancel_deferred_work(struct il_priv *il)
-{
- il3945_hw_cancel_deferred_work(il);
-
- cancel_delayed_work_sync(&il->init_alive_start);
- cancel_delayed_work(&il->alive_start);
-
- il_cancel_scan_deferred_work(il);
-}
-
-static struct attribute *il3945_sysfs_entries[] = {
- &dev_attr_antenna.attr,
- &dev_attr_channels.attr,
- &dev_attr_dump_errors.attr,
- &dev_attr_flags.attr,
- &dev_attr_filter_flags.attr,
- &dev_attr_measurement.attr,
- &dev_attr_retry_rate.attr,
- &dev_attr_status.attr,
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLEGACY_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group il3945_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = il3945_sysfs_entries,
-};
-
-struct ieee80211_ops il3945_hw_ops = {
- .tx = il3945_mac_tx,
- .start = il3945_mac_start,
- .stop = il3945_mac_stop,
- .add_interface = il_mac_add_interface,
- .remove_interface = il_mac_remove_interface,
- .change_interface = il_mac_change_interface,
- .config = il_mac_config,
- .configure_filter = il3945_configure_filter,
- .set_key = il3945_mac_set_key,
- .conf_tx = il_mac_conf_tx,
- .reset_tsf = il_mac_reset_tsf,
- .bss_info_changed = il_mac_bss_info_changed,
- .hw_scan = il_mac_hw_scan,
- .sta_add = il3945_mac_sta_add,
- .sta_remove = il_mac_sta_remove,
- .tx_last_beacon = il_mac_tx_last_beacon,
-};
-
-static int il3945_init_drv(struct il_priv *il)
-{
- int ret;
- struct il3945_eeprom *eeprom = (struct il3945_eeprom *)il->eeprom;
-
- il->retry_rate = 1;
- il->beacon_skb = NULL;
-
- spin_lock_init(&il->sta_lock);
- spin_lock_init(&il->hcmd_lock);
-
- INIT_LIST_HEAD(&il->free_frames);
-
- mutex_init(&il->mutex);
-
- il->ieee_channels = NULL;
- il->ieee_rates = NULL;
- il->band = IEEE80211_BAND_2GHZ;
-
- il->iw_mode = NL80211_IFTYPE_STATION;
- il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
-
- /* initialize force reset */
- il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
-
- if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
- IL_WARN("Unsupported EEPROM version: 0x%04X\n",
- eeprom->version);
- ret = -EINVAL;
- goto err;
- }
- ret = il_init_channel_map(il);
- if (ret) {
- IL_ERR("initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- /* Set up txpower settings in driver for all channels */
- if (il3945_txpower_set_from_eeprom(il)) {
- ret = -EIO;
- goto err_free_channel_map;
- }
-
- ret = il_init_geos(il);
- if (ret) {
- IL_ERR("initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
- il3945_init_hw_rates(il, il->ieee_rates);
-
- return 0;
-
-err_free_channel_map:
- il_free_channel_map(il);
-err:
- return ret;
-}
-
-#define IL3945_MAX_PROBE_REQUEST 200
-
-static int il3945_setup_mac(struct il_priv *il)
-{
- int ret;
- struct ieee80211_hw *hw = il->hw;
-
- hw->rate_control_algorithm = "iwl-3945-rs";
- hw->sta_data_size = sizeof(struct il3945_sta_priv);
- hw->vif_data_size = sizeof(struct il_vif_priv);
-
- /* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_SPECTRUM_MGMT;
-
- hw->wiphy->interface_modes =
- il->ctx.interface_modes;
-
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS |
- WIPHY_FLAG_IBSS_RSN;
-
- hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX_3945;
- /* we create the 802.11 header and a zero-length SSID element */
- hw->wiphy->max_scan_ie_len = IL3945_MAX_PROBE_REQUEST - 24 - 2;
-
- /* Default value; 4 EDCA QOS priorities */
- hw->queues = 4;
-
- if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
- il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &il->bands[IEEE80211_BAND_2GHZ];
-
- if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
- il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &il->bands[IEEE80211_BAND_5GHZ];
-
- il_leds_init(il);
-
- ret = ieee80211_register_hw(il->hw);
- if (ret) {
- IL_ERR("Failed to register hw (error %d)\n", ret);
- return ret;
- }
- il->mac80211_registered = 1;
-
- return 0;
-}
-
-static int il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int err = 0;
- struct il_priv *il;
- struct ieee80211_hw *hw;
- struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
- struct il3945_eeprom *eeprom;
- unsigned long flags;
-
- /***********************
- * 1. Allocating HW data
- * ********************/
-
- /* mac80211 allocates memory for this device instance, including
- * space for this driver's ilate structure */
- hw = il_alloc_all(cfg);
- if (hw == NULL) {
- pr_err("Can not allocate network device\n");
- err = -ENOMEM;
- goto out;
- }
- il = hw->priv;
- SET_IEEE80211_DEV(hw, &pdev->dev);
-
- il->cmd_queue = IL39_CMD_QUEUE_NUM;
-
- il->ctx.ctxid = 0;
-
- il->ctx.rxon_cmd = REPLY_RXON;
- il->ctx.rxon_timing_cmd = REPLY_RXON_TIMING;
- il->ctx.rxon_assoc_cmd = REPLY_RXON_ASSOC;
- il->ctx.qos_cmd = REPLY_QOS_PARAM;
- il->ctx.ap_sta_id = IL_AP_ID;
- il->ctx.wep_key_cmd = REPLY_WEPKEY;
- il->ctx.interface_modes =
- BIT(NL80211_IFTYPE_STATION) |
- BIT(NL80211_IFTYPE_ADHOC);
- il->ctx.ibss_devtype = RXON_DEV_TYPE_IBSS;
- il->ctx.station_devtype = RXON_DEV_TYPE_ESS;
- il->ctx.unused_devtype = RXON_DEV_TYPE_ESS;
-
- /*
- * Disabling hardware scan means that mac80211 will perform scans
- * "the hard way", rather than using device's scan.
- */
- if (il3945_mod_params.disable_hw_scan) {
- D_INFO("Disabling hw_scan\n");
- il3945_hw_ops.hw_scan = NULL;
- }
-
- D_INFO("*** LOAD DRIVER ***\n");
- il->cfg = cfg;
- il->pci_dev = pdev;
- il->inta_mask = CSR_INI_SET_MASK;
-
- if (il_alloc_traffic_mem(il))
- IL_ERR("Not enough memory to generate traffic log\n");
-
- /***************************
- * 2. Initializing PCI bus
- * *************************/
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
- if (pci_enable_device(pdev)) {
- err = -ENODEV;
- goto out_ieee80211_free_hw;
- }
-
- pci_set_master(pdev);
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
- if (err) {
- IL_WARN("No suitable DMA available.\n");
- goto out_pci_disable_device;
- }
-
- pci_set_drvdata(pdev, il);
- err = pci_request_regions(pdev, DRV_NAME);
- if (err)
- goto out_pci_disable_device;
-
- /***********************
- * 3. Read REV Register
- * ********************/
- il->hw_base = pci_iomap(pdev, 0, 0);
- if (!il->hw_base) {
- err = -ENODEV;
- goto out_pci_release_regions;
- }
-
- D_INFO("pci_resource_len = 0x%08llx\n",
- (unsigned long long) pci_resource_len(pdev, 0));
- D_INFO("pci_resource_base = %p\n", il->hw_base);
-
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_write_config_byte(pdev, 0x41, 0x00);
-
- /* these spin locks will be used in apm_ops.init and EEPROM access
- * we should init now
- */
- spin_lock_init(&il->reg_lock);
- spin_lock_init(&il->lock);
-
- /*
- * stop and reset the on-board processor just in case it is in a
- * strange state ... like being left stranded by a primary kernel
- * and this is now the kdump kernel trying to start up
- */
- _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /***********************
- * 4. Read EEPROM
- * ********************/
-
- /* Read the EEPROM */
- err = il_eeprom_init(il);
- if (err) {
- IL_ERR("Unable to init EEPROM\n");
- goto out_iounmap;
- }
- /* MAC Address location in EEPROM same for 3945/4965 */
- eeprom = (struct il3945_eeprom *)il->eeprom;
- D_INFO("MAC address: %pM\n", eeprom->mac_address);
- SET_IEEE80211_PERM_ADDR(il->hw, eeprom->mac_address);
-
- /***********************
- * 5. Setup HW Constants
- * ********************/
- /* Device-specific setup */
- if (il3945_hw_set_hw_params(il)) {
- IL_ERR("failed to set hw settings\n");
- goto out_eeprom_free;
- }
-
- /***********************
- * 6. Setup il
- * ********************/
-
- err = il3945_init_drv(il);
- if (err) {
- IL_ERR("initializing driver failed\n");
- goto out_unset_hw_params;
- }
-
- IL_INFO("Detected Intel Wireless WiFi Link %s\n",
- il->cfg->name);
-
- /***********************
- * 7. Setup Services
- * ********************/
-
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
-
- pci_enable_msi(il->pci_dev);
-
- err = request_irq(il->pci_dev->irq, il_isr,
- IRQF_SHARED, DRV_NAME, il);
- if (err) {
- IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
- goto out_disable_msi;
- }
-
- err = sysfs_create_group(&pdev->dev.kobj, &il3945_attribute_group);
- if (err) {
- IL_ERR("failed to create sysfs device attributes\n");
- goto out_release_irq;
- }
-
- il_set_rxon_channel(il,
- &il->bands[IEEE80211_BAND_2GHZ].channels[5],
- &il->ctx);
- il3945_setup_deferred_work(il);
- il3945_setup_rx_handlers(il);
- il_power_initialize(il);
-
- /*********************************
- * 8. Setup and Register mac80211
- * *******************************/
-
- il_enable_interrupts(il);
-
- err = il3945_setup_mac(il);
- if (err)
- goto out_remove_sysfs;
-
- err = il_dbgfs_register(il, DRV_NAME);
- if (err)
- IL_ERR("failed to create debugfs files. Ignoring error: %d\n", err);
-
- /* Start monitoring the killswitch */
- queue_delayed_work(il->workqueue, &il->_3945.rfkill_poll,
- 2 * HZ);
-
- return 0;
-
- out_remove_sysfs:
- destroy_workqueue(il->workqueue);
- il->workqueue = NULL;
- sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
- out_release_irq:
- free_irq(il->pci_dev->irq, il);
- out_disable_msi:
- pci_disable_msi(il->pci_dev);
- il_free_geos(il);
- il_free_channel_map(il);
- out_unset_hw_params:
- il3945_unset_hw_params(il);
- out_eeprom_free:
- il_eeprom_free(il);
- out_iounmap:
- pci_iounmap(pdev, il->hw_base);
- out_pci_release_regions:
- pci_release_regions(pdev);
- out_pci_disable_device:
- pci_set_drvdata(pdev, NULL);
- pci_disable_device(pdev);
- out_ieee80211_free_hw:
- il_free_traffic_mem(il);
- ieee80211_free_hw(il->hw);
- out:
- return err;
-}
-
-static void __devexit il3945_pci_remove(struct pci_dev *pdev)
-{
- struct il_priv *il = pci_get_drvdata(pdev);
- unsigned long flags;
-
- if (!il)
- return;
-
- D_INFO("*** UNLOAD DRIVER ***\n");
-
- il_dbgfs_unregister(il);
-
- set_bit(STATUS_EXIT_PENDING, &il->status);
-
- il_leds_exit(il);
-
- if (il->mac80211_registered) {
- ieee80211_unregister_hw(il->hw);
- il->mac80211_registered = 0;
- } else {
- il3945_down(il);
- }
-
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with il_down(), but there are paths to
- * run il_down() without calling apm_ops.stop(), and there are
- * paths to avoid running il_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
- il_apm_stop(il);
-
- /* make sure we flush any pending irq or
- * tasklet for the driver
- */
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
-
- il3945_synchronize_irq(il);
-
- sysfs_remove_group(&pdev->dev.kobj, &il3945_attribute_group);
-
- cancel_delayed_work_sync(&il->_3945.rfkill_poll);
-
- il3945_dealloc_ucode_pci(il);
-
- if (il->rxq.bd)
- il3945_rx_queue_free(il, &il->rxq);
- il3945_hw_txq_ctx_free(il);
-
- il3945_unset_hw_params(il);
-
- /*netif_stop_queue(dev); */
- flush_workqueue(il->workqueue);
-
- /* ieee80211_unregister_hw calls il3945_mac_stop, which flushes
- * il->workqueue... so we can't take down the workqueue
- * until now... */
- destroy_workqueue(il->workqueue);
- il->workqueue = NULL;
- il_free_traffic_mem(il);
-
- free_irq(pdev->irq, il);
- pci_disable_msi(pdev);
-
- pci_iounmap(pdev, il->hw_base);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
-
- il_free_channel_map(il);
- il_free_geos(il);
- kfree(il->scan_cmd);
- if (il->beacon_skb)
- dev_kfree_skb(il->beacon_skb);
-
- ieee80211_free_hw(il->hw);
-}
-
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-static struct pci_driver il3945_driver = {
- .name = DRV_NAME,
- .id_table = il3945_hw_card_ids,
- .probe = il3945_pci_probe,
- .remove = __devexit_p(il3945_pci_remove),
- .driver.pm = IL_LEGACY_PM_OPS,
-};
-
-static int __init il3945_init(void)
-{
-
- int ret;
- pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
- pr_info(DRV_COPYRIGHT "\n");
-
- ret = il3945_rate_control_register();
- if (ret) {
- pr_err("Unable to register rate control algorithm: %d\n", ret);
- return ret;
- }
-
- ret = pci_register_driver(&il3945_driver);
- if (ret) {
- pr_err("Unable to initialize PCI module\n");
- goto error_register;
- }
-
- return ret;
-
-error_register:
- il3945_rate_control_unregister();
- return ret;
-}
-
-static void __exit il3945_exit(void)
-{
- pci_unregister_driver(&il3945_driver);
- il3945_rate_control_unregister();
-}
-
-MODULE_FIRMWARE(IL3945_MODULE_FIRMWARE(IL3945_UCODE_API_MAX));
-
-module_param_named(antenna, il3945_mod_params.antenna, int, S_IRUGO);
-MODULE_PARM_DESC(antenna, "select antenna (1=Main, 2=Aux, default 0 [both])");
-module_param_named(swcrypto, il3945_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto,
- "using software crypto (default 1 [software])");
-module_param_named(disable_hw_scan, il3945_mod_params.disable_hw_scan,
- int, S_IRUGO);
-MODULE_PARM_DESC(disable_hw_scan, "disable hardware scanning (default 1)");
-#ifdef CONFIG_IWLEGACY_DEBUG
-module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-module_param_named(fw_restart, il3945_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
-
-module_exit(il3945_exit);
-module_init(il3945_init);
+++ /dev/null
-/******************************************************************************
- *
- * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
- *
- * Portions of this file are derived from the ipw3945 project, as well
- * as portions of the ieee80211 subsystem header files.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
- *
- * The full GNU General Public License is included in this distribution in the
- * file called LICENSE.
- *
- * Contact Information:
- * Intel Linux Wireless <ilw@linux.intel.com>
- * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
- *
- *****************************************************************************/
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/pci-aspm.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/skbuff.h>
-#include <linux/netdevice.h>
-#include <linux/firmware.h>
-#include <linux/etherdevice.h>
-#include <linux/if_arp.h>
-
-#include <net/mac80211.h>
-
-#include <asm/div64.h>
-
-#define DRV_NAME "iwl4965"
-
-#include "iwl-eeprom.h"
-#include "iwl-dev.h"
-#include "iwl-core.h"
-#include "iwl-io.h"
-#include "iwl-helpers.h"
-#include "iwl-sta.h"
-#include "iwl-4965-calib.h"
-#include "iwl-4965.h"
-#include "iwl-4965-led.h"
-
-
-/******************************************************************************
- *
- * module boiler plate
- *
- ******************************************************************************/
-
-/*
- * module name, copyright, version, etc.
- */
-#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux"
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-#define VD "d"
-#else
-#define VD
-#endif
-
-#define DRV_VERSION IWLWIFI_VERSION VD
-
-
-MODULE_DESCRIPTION(DRV_DESCRIPTION);
-MODULE_VERSION(DRV_VERSION);
-MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("iwl4965");
-
-void il4965_update_chain_flags(struct il_priv *il)
-{
- if (il->cfg->ops->hcmd->set_rxon_chain) {
- il->cfg->ops->hcmd->set_rxon_chain(il, &il->ctx);
- if (il->ctx.active.rx_chain != il->ctx.staging.rx_chain)
- il_commit_rxon(il, &il->ctx);
- }
-}
-
-static void il4965_clear_free_frames(struct il_priv *il)
-{
- struct list_head *element;
-
- D_INFO("%d frames on pre-allocated heap on clear.\n",
- il->frames_count);
-
- while (!list_empty(&il->free_frames)) {
- element = il->free_frames.next;
- list_del(element);
- kfree(list_entry(element, struct il_frame, list));
- il->frames_count--;
- }
-
- if (il->frames_count) {
- IL_WARN("%d frames still in use. Did we lose one?\n",
- il->frames_count);
- il->frames_count = 0;
- }
-}
-
-static struct il_frame *il4965_get_free_frame(struct il_priv *il)
-{
- struct il_frame *frame;
- struct list_head *element;
- if (list_empty(&il->free_frames)) {
- frame = kzalloc(sizeof(*frame), GFP_KERNEL);
- if (!frame) {
- IL_ERR("Could not allocate frame!\n");
- return NULL;
- }
-
- il->frames_count++;
- return frame;
- }
-
- element = il->free_frames.next;
- list_del(element);
- return list_entry(element, struct il_frame, list);
-}
-
-static void il4965_free_frame(struct il_priv *il, struct il_frame *frame)
-{
- memset(frame, 0, sizeof(*frame));
- list_add(&frame->list, &il->free_frames);
-}
-
-static u32 il4965_fill_beacon_frame(struct il_priv *il,
- struct ieee80211_hdr *hdr,
- int left)
-{
- lockdep_assert_held(&il->mutex);
-
- if (!il->beacon_skb)
- return 0;
-
- if (il->beacon_skb->len > left)
- return 0;
-
- memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);
-
- return il->beacon_skb->len;
-}
-
-/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
-static void il4965_set_beacon_tim(struct il_priv *il,
- struct il_tx_beacon_cmd *tx_beacon_cmd,
- u8 *beacon, u32 frame_size)
-{
- u16 tim_idx;
- struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;
-
- /*
- * The idx is relative to frame start but we start looking at the
- * variable-length part of the beacon.
- */
- tim_idx = mgmt->u.beacon.variable - beacon;
-
- /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
- while ((tim_idx < (frame_size - 2)) &&
- (beacon[tim_idx] != WLAN_EID_TIM))
- tim_idx += beacon[tim_idx+1] + 2;
-
- /* If TIM field was found, set variables */
- if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
- tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
- tx_beacon_cmd->tim_size = beacon[tim_idx+1];
- } else
- IL_WARN("Unable to find TIM Element in beacon\n");
-}
-
-static unsigned int il4965_hw_get_beacon_cmd(struct il_priv *il,
- struct il_frame *frame)
-{
- struct il_tx_beacon_cmd *tx_beacon_cmd;
- u32 frame_size;
- u32 rate_flags;
- u32 rate;
- /*
- * We have to set up the TX command, the TX Beacon command, and the
- * beacon contents.
- */
-
- lockdep_assert_held(&il->mutex);
-
- if (!il->beacon_ctx) {
- IL_ERR("trying to build beacon w/o beacon context!\n");
- return 0;
- }
-
- /* Initialize memory */
- tx_beacon_cmd = &frame->u.beacon;
- memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));
-
- /* Set up TX beacon contents */
- frame_size = il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
- sizeof(frame->u) - sizeof(*tx_beacon_cmd));
- if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
- return 0;
- if (!frame_size)
- return 0;
-
- /* Set up TX command fields */
- tx_beacon_cmd->tx.len = cpu_to_le16((u16)frame_size);
- tx_beacon_cmd->tx.sta_id = il->beacon_ctx->bcast_sta_id;
- tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
- tx_beacon_cmd->tx.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK |
- TX_CMD_FLG_TSF_MSK | TX_CMD_FLG_STA_RATE_MSK;
-
- /* Set up TX beacon command fields */
- il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *)tx_beacon_cmd->frame,
- frame_size);
-
- /* Set up packet rate and flags */
- rate = il_get_lowest_plcp(il, il->beacon_ctx);
- il->mgmt_tx_ant = il4965_toggle_tx_ant(il, il->mgmt_tx_ant,
- il->hw_params.valid_tx_ant);
- rate_flags = il4965_ant_idx_to_flags(il->mgmt_tx_ant);
- if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
- rate_flags |= RATE_MCS_CCK_MSK;
- tx_beacon_cmd->tx.rate_n_flags = il4965_hw_set_rate_n_flags(rate,
- rate_flags);
-
- return sizeof(*tx_beacon_cmd) + frame_size;
-}
-
-int il4965_send_beacon_cmd(struct il_priv *il)
-{
- struct il_frame *frame;
- unsigned int frame_size;
- int rc;
-
- frame = il4965_get_free_frame(il);
- if (!frame) {
- IL_ERR("Could not obtain free frame buffer for beacon "
- "command.\n");
- return -ENOMEM;
- }
-
- frame_size = il4965_hw_get_beacon_cmd(il, frame);
- if (!frame_size) {
- IL_ERR("Error configuring the beacon command\n");
- il4965_free_frame(il, frame);
- return -EINVAL;
- }
-
- rc = il_send_cmd_pdu(il, REPLY_TX_BEACON, frame_size,
- &frame->u.cmd[0]);
-
- il4965_free_frame(il, frame);
-
- return rc;
-}
-
-static inline dma_addr_t il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
-{
- struct il_tfd_tb *tb = &tfd->tbs[idx];
-
- dma_addr_t addr = get_unaligned_le32(&tb->lo);
- if (sizeof(dma_addr_t) > sizeof(u32))
- addr |=
- ((dma_addr_t)(le16_to_cpu(tb->hi_n_len) & 0xF) << 16) << 16;
-
- return addr;
-}
-
-static inline u16 il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
-{
- struct il_tfd_tb *tb = &tfd->tbs[idx];
-
- return le16_to_cpu(tb->hi_n_len) >> 4;
-}
-
-static inline void il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx,
- dma_addr_t addr, u16 len)
-{
- struct il_tfd_tb *tb = &tfd->tbs[idx];
- u16 hi_n_len = len << 4;
-
- put_unaligned_le32(addr, &tb->lo);
- if (sizeof(dma_addr_t) > sizeof(u32))
- hi_n_len |= ((addr >> 16) >> 16) & 0xF;
-
- tb->hi_n_len = cpu_to_le16(hi_n_len);
-
- tfd->num_tbs = idx + 1;
-}
-
-static inline u8 il4965_tfd_get_num_tbs(struct il_tfd *tfd)
-{
- return tfd->num_tbs & 0x1f;
-}
-
-/**
- * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
- * @il - driver ilate data
- * @txq - tx queue
- *
- * Does NOT advance any TFD circular buffer read/write idxes
- * Does NOT free the TFD itself (which is within circular buffer)
- */
-void il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
-{
- struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
- struct il_tfd *tfd;
- struct pci_dev *dev = il->pci_dev;
- int idx = txq->q.read_ptr;
- int i;
- int num_tbs;
-
- tfd = &tfd_tmp[idx];
-
- /* Sanity check on number of chunks */
- num_tbs = il4965_tfd_get_num_tbs(tfd);
-
- if (num_tbs >= IL_NUM_OF_TBS) {
- IL_ERR("Too many chunks: %i\n", num_tbs);
- /* @todo issue fatal error, it is quite serious situation */
- return;
- }
-
- /* Unmap tx_cmd */
- if (num_tbs)
- pci_unmap_single(dev,
- dma_unmap_addr(&txq->meta[idx], mapping),
- dma_unmap_len(&txq->meta[idx], len),
- PCI_DMA_BIDIRECTIONAL);
-
- /* Unmap chunks, if any. */
- for (i = 1; i < num_tbs; i++)
- pci_unmap_single(dev, il4965_tfd_tb_get_addr(tfd, i),
- il4965_tfd_tb_get_len(tfd, i),
- PCI_DMA_TODEVICE);
-
- /* free SKB */
- if (txq->txb) {
- struct sk_buff *skb;
-
- skb = txq->txb[txq->q.read_ptr].skb;
-
- /* can be called from irqs-disabled context */
- if (skb) {
- dev_kfree_skb_any(skb);
- txq->txb[txq->q.read_ptr].skb = NULL;
- }
- }
-}
-
-int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il,
- struct il_tx_queue *txq,
- dma_addr_t addr, u16 len,
- u8 reset, u8 pad)
-{
- struct il_queue *q;
- struct il_tfd *tfd, *tfd_tmp;
- u32 num_tbs;
-
- q = &txq->q;
- tfd_tmp = (struct il_tfd *)txq->tfds;
- tfd = &tfd_tmp[q->write_ptr];
-
- if (reset)
- memset(tfd, 0, sizeof(*tfd));
-
- num_tbs = il4965_tfd_get_num_tbs(tfd);
-
- /* Each TFD can point to a maximum 20 Tx buffers */
- if (num_tbs >= IL_NUM_OF_TBS) {
- IL_ERR("Error can not send more than %d chunks\n",
- IL_NUM_OF_TBS);
- return -EINVAL;
- }
-
- BUG_ON(addr & ~DMA_BIT_MASK(36));
- if (unlikely(addr & ~IL_TX_DMA_MASK))
- IL_ERR("Unaligned address = %llx\n",
- (unsigned long long)addr);
-
- il4965_tfd_set_tb(tfd, num_tbs, addr, len);
-
- return 0;
-}
-
-/*
- * Tell nic where to find circular buffer of Tx Frame Descriptors for
- * given Tx queue, and enable the DMA channel used for that queue.
- *
- * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
- * channels supported in hardware.
- */
-int il4965_hw_tx_queue_init(struct il_priv *il,
- struct il_tx_queue *txq)
-{
- int txq_id = txq->q.id;
-
- /* Circular buffer (TFD queue in DRAM) physical base address */
- il_wr(il, FH_MEM_CBBC_QUEUE(txq_id),
- txq->q.dma_addr >> 8);
-
- return 0;
-}
-
-/******************************************************************************
- *
- * Generic RX handler implementations
- *
- ******************************************************************************/
-static void il4965_rx_reply_alive(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il_alive_resp *palive;
- struct delayed_work *pwork;
-
- palive = &pkt->u.alive_frame;
-
- D_INFO("Alive ucode status 0x%08X revision "
- "0x%01X 0x%01X\n",
- palive->is_valid, palive->ver_type,
- palive->ver_subtype);
-
- if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
- D_INFO("Initialization Alive received.\n");
- memcpy(&il->card_alive_init,
- &pkt->u.alive_frame,
- sizeof(struct il_init_alive_resp));
- pwork = &il->init_alive_start;
- } else {
- D_INFO("Runtime Alive received.\n");
- memcpy(&il->card_alive, &pkt->u.alive_frame,
- sizeof(struct il_alive_resp));
- pwork = &il->alive_start;
- }
-
- /* We delay the ALIVE response by 5ms to
- * give the HW RF Kill time to activate... */
- if (palive->is_valid == UCODE_VALID_OK)
- queue_delayed_work(il->workqueue, pwork,
- msecs_to_jiffies(5));
- else
- IL_WARN("uCode did not respond OK.\n");
-}
-
-/**
- * il4965_bg_stats_periodic - Timer callback to queue stats
- *
- * This callback is provided in order to send a stats request.
- *
- * This timer function is continually reset to execute within
- * REG_RECALIB_PERIOD seconds since the last STATISTICS_NOTIFICATION
- * was received. We need to ensure we receive the stats in order
- * to update the temperature used for calibrating the TXPOWER.
- */
-static void il4965_bg_stats_periodic(unsigned long data)
-{
- struct il_priv *il = (struct il_priv *)data;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- /* dont send host command if rf-kill is on */
- if (!il_is_ready_rf(il))
- return;
-
- il_send_stats_request(il, CMD_ASYNC, false);
-}
-
-static void il4965_rx_beacon_notif(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- struct il4965_beacon_notif *beacon =
- (struct il4965_beacon_notif *)pkt->u.raw;
-#ifdef CONFIG_IWLEGACY_DEBUG
- u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);
-
- D_RX("beacon status %x retries %d iss %d "
- "tsf %d %d rate %d\n",
- le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
- beacon->beacon_notify_hdr.failure_frame,
- le32_to_cpu(beacon->ibss_mgr_status),
- le32_to_cpu(beacon->high_tsf),
- le32_to_cpu(beacon->low_tsf), rate);
-#endif
-
- il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
-}
-
-static void il4965_perform_ct_kill_task(struct il_priv *il)
-{
- unsigned long flags;
-
- D_POWER("Stop all queues\n");
-
- if (il->mac80211_registered)
- ieee80211_stop_queues(il->hw);
-
- _il_wr(il, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- _il_rd(il, CSR_UCODE_DRV_GP1);
-
- spin_lock_irqsave(&il->reg_lock, flags);
- if (!_il_grab_nic_access(il))
- _il_release_nic_access(il);
- spin_unlock_irqrestore(&il->reg_lock, flags);
-}
-
-/* Handle notification from uCode that card's power state is changing
- * due to software, hardware, or critical temperature RFKILL */
-static void il4965_rx_card_state_notif(struct il_priv *il,
- struct il_rx_buf *rxb)
-{
- struct il_rx_pkt *pkt = rxb_addr(rxb);
- u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
- unsigned long status = il->status;
-
- D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
- (flags & HW_CARD_DISABLED) ? "Kill" : "On",
- (flags & SW_CARD_DISABLED) ? "Kill" : "On",
- (flags & CT_CARD_DISABLED) ?
- "Reached" : "Not reached");
-
- if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED |
- CT_CARD_DISABLED)) {
-
- _il_wr(il, CSR_UCODE_DRV_GP1_SET,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- il_wr(il, HBUS_TARG_MBX_C,
- HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
-
- if (!(flags & RXON_CARD_DISABLED)) {
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
- il_wr(il, HBUS_TARG_MBX_C,
- HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
- }
- }
-
- if (flags & CT_CARD_DISABLED)
- il4965_perform_ct_kill_task(il);
-
- if (flags & HW_CARD_DISABLED)
- set_bit(STATUS_RF_KILL_HW, &il->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
-
- if (!(flags & RXON_CARD_DISABLED))
- il_scan_cancel(il);
-
- if ((test_bit(STATUS_RF_KILL_HW, &status) !=
- test_bit(STATUS_RF_KILL_HW, &il->status)))
- wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
- else
- wake_up(&il->wait_command_queue);
-}
-
-/**
- * il4965_setup_rx_handlers - Initialize Rx handler callbacks
- *
- * Setup the RX handlers for each of the reply types sent from the uCode
- * to the host.
- *
- * This function chains into the hardware specific files for them to setup
- * any hardware specific handlers as well.
- */
-static void il4965_setup_rx_handlers(struct il_priv *il)
-{
- il->rx_handlers[REPLY_ALIVE] = il4965_rx_reply_alive;
- il->rx_handlers[REPLY_ERROR] = il_rx_reply_error;
- il->rx_handlers[CHANNEL_SWITCH_NOTIFICATION] = il_rx_csa;
- il->rx_handlers[SPECTRUM_MEASURE_NOTIFICATION] =
- il_rx_spectrum_measure_notif;
- il->rx_handlers[PM_SLEEP_NOTIFICATION] = il_rx_pm_sleep_notif;
- il->rx_handlers[PM_DEBUG_STATISTIC_NOTIFIC] =
- il_rx_pm_debug_stats_notif;
- il->rx_handlers[BEACON_NOTIFICATION] = il4965_rx_beacon_notif;
-
- /*
- * The same handler is used for both the REPLY to a discrete
- * stats request from the host as well as for the periodic
- * stats notifications (after received beacons) from the uCode.
- */
- il->rx_handlers[REPLY_STATISTICS_CMD] = il4965_reply_stats;
- il->rx_handlers[STATISTICS_NOTIFICATION] = il4965_rx_stats;
-
- il_setup_rx_scan_handlers(il);
-
- /* status change handler */
- il->rx_handlers[CARD_STATE_NOTIFICATION] =
- il4965_rx_card_state_notif;
-
- il->rx_handlers[MISSED_BEACONS_NOTIFICATION] =
- il4965_rx_missed_beacon_notif;
- /* Rx handlers */
- il->rx_handlers[REPLY_RX_PHY_CMD] = il4965_rx_reply_rx_phy;
- il->rx_handlers[REPLY_RX_MPDU_CMD] = il4965_rx_reply_rx;
- /* block ack */
- il->rx_handlers[REPLY_COMPRESSED_BA] = il4965_rx_reply_compressed_ba;
- /* Set up hardware specific Rx handlers */
- il->cfg->ops->lib->rx_handler_setup(il);
-}
-
-/**
- * il4965_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the il->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-void il4965_rx_handle(struct il_priv *il)
-{
- struct il_rx_buf *rxb;
- struct il_rx_pkt *pkt;
- struct il_rx_queue *rxq = &il->rxq;
- u32 r, i;
- int reclaim;
- unsigned long flags;
- u8 fill_rx = 0;
- u32 count = 8;
- int total_empty;
-
- /* uCode's read idx (stored in shared DRAM) indicates the last Rx
- * buffer that the driver may process (last buffer filled by ucode). */
- r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
- i = rxq->read;
-
- /* Rx interrupt, but nothing sent from uCode */
- if (i == r)
- D_RX("r = %d, i = %d\n", r, i);
-
- /* calculate total frames need to be restock after handling RX */
- total_empty = r - rxq->write_actual;
- if (total_empty < 0)
- total_empty += RX_QUEUE_SIZE;
-
- if (total_empty > (RX_QUEUE_SIZE / 2))
- fill_rx = 1;
-
- while (i != r) {
- int len;
-
- rxb = rxq->queue[i];
-
- /* If an RXB doesn't have a Rx queue slot associated with it,
- * then a bug has been introduced in the queue refilling
- * routines -- catch it here */
- BUG_ON(rxb == NULL);
-
- rxq->queue[i] = NULL;
-
- pci_unmap_page(il->pci_dev, rxb->page_dma,
- PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- pkt = rxb_addr(rxb);
-
- len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
- len += sizeof(u32); /* account for status word */
-
- /* Reclaim a command buffer only if this packet is a response
- * to a (driver-originated) command.
- * If the packet (e.g. Rx frame) originated from uCode,
- * there is no command buffer to reclaim.
- * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
- * but apparently a few don't get set; catch them here. */
- reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
- (pkt->hdr.cmd != REPLY_RX) &&
- (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
- (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
- (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
- (pkt->hdr.cmd != REPLY_TX);
-
- /* Based on type of command response or notification,
- * handle those that need handling via function in
- * rx_handlers table. See il4965_setup_rx_handlers() */
- if (il->rx_handlers[pkt->hdr.cmd]) {
- D_RX("r = %d, i = %d, %s, 0x%02x\n", r,
- i, il_get_cmd_string(pkt->hdr.cmd),
- pkt->hdr.cmd);
- il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
- il->rx_handlers[pkt->hdr.cmd] (il, rxb);
- } else {
- /* No handling needed */
- D_RX(
- "r %d i %d No handler needed for %s, 0x%02x\n",
- r, i, il_get_cmd_string(pkt->hdr.cmd),
- pkt->hdr.cmd);
- }
-
- /*
- * XXX: After here, we should always check rxb->page
- * against NULL before touching it or its virtual
- * memory (pkt). Because some rx_handler might have
- * already taken or freed the pages.
- */
-
- if (reclaim) {
- /* Invoke any callbacks, transfer the buffer to caller,
- * and fire off the (possibly) blocking il_send_cmd()
- * as we reclaim the driver command queue */
- if (rxb->page)
- il_tx_cmd_complete(il, rxb);
- else
- IL_WARN("Claim null rxb?\n");
- }
-
- /* Reuse the page if possible. For notification packets and
- * SKBs that fail to Rx correctly, add them back into the
- * rx_free list for reuse later. */
- spin_lock_irqsave(&rxq->lock, flags);
- if (rxb->page != NULL) {
- rxb->page_dma = pci_map_page(il->pci_dev, rxb->page,
- 0, PAGE_SIZE << il->hw_params.rx_page_order,
- PCI_DMA_FROMDEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- } else
- list_add_tail(&rxb->list, &rxq->rx_used);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- i = (i + 1) & RX_QUEUE_MASK;
- /* If there are a lot of unused frames,
- * restock the Rx queue so ucode wont assert. */
- if (fill_rx) {
- count++;
- if (count >= 8) {
- rxq->read = i;
- il4965_rx_replenish_now(il);
- count = 0;
- }
- }
- }
-
- /* Backtrack one entry */
- rxq->read = i;
- if (fill_rx)
- il4965_rx_replenish_now(il);
- else
- il4965_rx_queue_restock(il);
-}
-
-/* call this function to flush any scheduled tasklet */
-static inline void il4965_synchronize_irq(struct il_priv *il)
-{
- /* wait to make sure we flush pending tasklet*/
- synchronize_irq(il->pci_dev->irq);
- tasklet_kill(&il->irq_tasklet);
-}
-
-static void il4965_irq_tasklet(struct il_priv *il)
-{
- u32 inta, handled = 0;
- u32 inta_fh;
- unsigned long flags;
- u32 i;
-#ifdef CONFIG_IWLEGACY_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&il->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- * and will clear only when CSR_FH_INT_STATUS gets cleared. */
- inta = _il_rd(il, CSR_INT);
- _il_wr(il, CSR_INT, inta);
-
- /* Ack/clear/reset pending flow-handler (DMA) interrupts.
- * Any new interrupts that happen after this, either while we're
- * in this tasklet, or later, will show up in next ISR/tasklet. */
- inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
- _il_wr(il, CSR_FH_INT_STATUS, inta_fh);
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & IL_DL_ISR) {
- /* just for debug */
- inta_mask = _il_rd(il, CSR_INT_MASK);
- D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n",
- inta, inta_mask, inta_fh);
- }
-#endif
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
- * atomic, make sure that inta covers all the interrupts that
- * we've discovered, even if FH interrupt came in just after
- * reading CSR_INT. */
- if (inta_fh & CSR49_FH_INT_RX_MASK)
- inta |= CSR_INT_BIT_FH_RX;
- if (inta_fh & CSR49_FH_INT_TX_MASK)
- inta |= CSR_INT_BIT_FH_TX;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IL_ERR("Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- il_disable_interrupts(il);
-
- il->isr_stats.hw++;
- il_irq_handle_error(il);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & (IL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- D_ISR("Scheduler finished to transmit "
- "the frame/frames.\n");
- il->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- D_ISR("Alive interrupt\n");
- il->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* HW RF KILL switch toggled */
- if (inta & CSR_INT_BIT_RF_KILL) {
- int hw_rf_kill = 0;
- if (!(_il_rd(il, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
- hw_rf_kill = 1;
-
- IL_WARN("RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio" : "enable radio");
-
- il->isr_stats.rfkill++;
-
- /* driver only loads ucode once setting the interface up.
- * the driver allows loading the ucode even if the radio
- * is killed. Hence update the killswitch state here. The
- * rfkill handler will care about restarting if needed.
- */
- if (!test_bit(STATUS_ALIVE, &il->status)) {
- if (hw_rf_kill)
- set_bit(STATUS_RF_KILL_HW, &il->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &il->status);
- wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);
- }
-
- handled |= CSR_INT_BIT_RF_KILL;
- }
-
- /* Chip got too hot and stopped itself */
- if (inta & CSR_INT_BIT_CT_KILL) {
- IL_ERR("Microcode CT kill error detected.\n");
- il->isr_stats.ctkill++;
- handled |= CSR_INT_BIT_CT_KILL;
- }
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IL_ERR("Microcode SW error detected. "
- " Restarting 0x%X.\n", inta);
- il->isr_stats.sw++;
- il_irq_handle_error(il);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /*
- * uCode wakes up after power-down sleep.
- * Tell device about any new tx or host commands enqueued,
- * and about any Rx buffers made available while asleep.
- */
- if (inta & CSR_INT_BIT_WAKEUP) {
- D_ISR("Wakeup interrupt\n");
- il_rx_queue_update_write_ptr(il, &il->rxq);
- for (i = 0; i < il->hw_params.max_txq_num; i++)
- il_txq_update_write_ptr(il, &il->txq[i]);
- il->isr_stats.wakeup++;
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- il4965_rx_handle(il);
- il->isr_stats.rx++;
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- }
-
- /* This "Tx" DMA channel is used only for loading uCode */
- if (inta & CSR_INT_BIT_FH_TX) {
- D_ISR("uCode load interrupt\n");
- il->isr_stats.tx++;
- handled |= CSR_INT_BIT_FH_TX;
- /* Wake up uCode load routine, now that load is complete */
- il->ucode_write_complete = 1;
- wake_up(&il->wait_command_queue);
- }
-
- if (inta & ~handled) {
- IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
- il->isr_stats.unhandled++;
- }
-
- if (inta & ~(il->inta_mask)) {
- IL_WARN("Disabled INTA bits 0x%08x were pending\n",
- inta & ~il->inta_mask);
- IL_WARN(" with FH_INT = 0x%08x\n", inta_fh);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &il->status))
- il_enable_interrupts(il);
- /* Re-enable RF_KILL if it occurred */
- else if (handled & CSR_INT_BIT_RF_KILL)
- il_enable_rfkill_int(il);
-
-#ifdef CONFIG_IWLEGACY_DEBUG
- if (il_get_debug_level(il) & (IL_DL_ISR)) {
- inta = _il_rd(il, CSR_INT);
- inta_mask = _il_rd(il, CSR_INT_MASK);
- inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
- D_ISR(
- "End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
- "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
- }
-#endif
-}
-
-/*****************************************************************************
- *
- * sysfs attributes
- *
- *****************************************************************************/
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-
-/*
- * The following adds a new attribute to the sysfs representation
- * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
- * used for controlling the debug level.
- *
- * See the level definitions in iwl for details.
- *
- * The debug_level being managed using sysfs below is a per device debug
- * level that is used instead of the global debug level if it (the per
- * device debug level) is set.
- */
-static ssize_t il4965_show_debug_level(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
- return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
-}
-static ssize_t il4965_store_debug_level(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 0, &val);
- if (ret)
- IL_ERR("%s is not in hex or decimal form.\n", buf);
- else {
- il->debug_level = val;
- if (il_alloc_traffic_mem(il))
- IL_ERR(
- "Not enough memory to generate traffic log\n");
- }
- return strnlen(buf, count);
-}
-
-static DEVICE_ATTR(debug_level, S_IWUSR | S_IRUGO,
- il4965_show_debug_level, il4965_store_debug_level);
-
-
-#endif /* CONFIG_IWLEGACY_DEBUG */
-
-
-static ssize_t il4965_show_temperature(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
-
- if (!il_is_alive(il))
- return -EAGAIN;
-
- return sprintf(buf, "%d\n", il->temperature);
-}
-
-static DEVICE_ATTR(temperature, S_IRUGO, il4965_show_temperature, NULL);
-
-static ssize_t il4965_show_tx_power(struct device *d,
- struct device_attribute *attr, char *buf)
-{
- struct il_priv *il = dev_get_drvdata(d);
-
- if (!il_is_ready_rf(il))
- return sprintf(buf, "off\n");
- else
- return sprintf(buf, "%d\n", il->tx_power_user_lmt);
-}
-
-static ssize_t il4965_store_tx_power(struct device *d,
- struct device_attribute *attr,
- const char *buf, size_t count)
-{
- struct il_priv *il = dev_get_drvdata(d);
- unsigned long val;
- int ret;
-
- ret = strict_strtoul(buf, 10, &val);
- if (ret)
- IL_INFO("%s is not in decimal form.\n", buf);
- else {
- ret = il_set_tx_power(il, val, false);
- if (ret)
- IL_ERR("failed setting tx power (0x%d).\n",
- ret);
- else
- ret = count;
- }
- return ret;
-}
-
-static DEVICE_ATTR(tx_power, S_IWUSR | S_IRUGO,
- il4965_show_tx_power, il4965_store_tx_power);
-
-static struct attribute *il_sysfs_entries[] = {
- &dev_attr_temperature.attr,
- &dev_attr_tx_power.attr,
-#ifdef CONFIG_IWLEGACY_DEBUG
- &dev_attr_debug_level.attr,
-#endif
- NULL
-};
-
-static struct attribute_group il_attribute_group = {
- .name = NULL, /* put in device directory */
- .attrs = il_sysfs_entries,
-};
-
-/******************************************************************************
- *
- * uCode download functions
- *
- ******************************************************************************/
-
-static void il4965_dealloc_ucode_pci(struct il_priv *il)
-{
- il_free_fw_desc(il->pci_dev, &il->ucode_code);
- il_free_fw_desc(il->pci_dev, &il->ucode_data);
- il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
- il_free_fw_desc(il->pci_dev, &il->ucode_init);
- il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
- il_free_fw_desc(il->pci_dev, &il->ucode_boot);
-}
-
-static void il4965_nic_start(struct il_priv *il)
-{
- /* Remove all resets to allow NIC to operate */
- _il_wr(il, CSR_RESET, 0);
-}
-
-static void il4965_ucode_callback(const struct firmware *ucode_raw,
- void *context);
-static int il4965_mac_setup_register(struct il_priv *il,
- u32 max_probe_length);
-
-static int __must_check il4965_request_firmware(struct il_priv *il, bool first)
-{
- const char *name_pre = il->cfg->fw_name_pre;
- char tag[8];
-
- if (first) {
- il->fw_idx = il->cfg->ucode_api_max;
- sprintf(tag, "%d", il->fw_idx);
- } else {
- il->fw_idx--;
- sprintf(tag, "%d", il->fw_idx);
- }
-
- if (il->fw_idx < il->cfg->ucode_api_min) {
- IL_ERR("no suitable firmware found!\n");
- return -ENOENT;
- }
-
- sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");
-
- D_INFO("attempting to load firmware '%s'\n",
- il->firmware_name);
-
- return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
- &il->pci_dev->dev, GFP_KERNEL, il,
- il4965_ucode_callback);
-}
-
-struct il4965_firmware_pieces {
- const void *inst, *data, *init, *init_data, *boot;
- size_t inst_size, data_size, init_size, init_data_size, boot_size;
-};
-
-static int il4965_load_firmware(struct il_priv *il,
- const struct firmware *ucode_raw,
- struct il4965_firmware_pieces *pieces)
-{
- struct il_ucode_header *ucode = (void *)ucode_raw->data;
- u32 api_ver, hdr_size;
- const u8 *src;
-
- il->ucode_ver = le32_to_cpu(ucode->ver);
- api_ver = IL_UCODE_API(il->ucode_ver);
-
- switch (api_ver) {
- default:
- case 0:
- case 1:
- case 2:
- hdr_size = 24;
- if (ucode_raw->size < hdr_size) {
- IL_ERR("File size too small!\n");
- return -EINVAL;
- }
- pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
- pieces->data_size = le32_to_cpu(ucode->v1.data_size);
- pieces->init_size = le32_to_cpu(ucode->v1.init_size);
- pieces->init_data_size =
- le32_to_cpu(ucode->v1.init_data_size);
- pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
- src = ucode->v1.data;
- break;
- }
-
- /* Verify size of file vs. image size info in file's header */
- if (ucode_raw->size != hdr_size + pieces->inst_size +
- pieces->data_size + pieces->init_size +
- pieces->init_data_size + pieces->boot_size) {
-
- IL_ERR(
- "uCode file size %d does not match expected size\n",
- (int)ucode_raw->size);
- return -EINVAL;
- }
-
- pieces->inst = src;
- src += pieces->inst_size;
- pieces->data = src;
- src += pieces->data_size;
- pieces->init = src;
- src += pieces->init_size;
- pieces->init_data = src;
- src += pieces->init_data_size;
- pieces->boot = src;
- src += pieces->boot_size;
-
- return 0;
-}
-
-/**
- * il4965_ucode_callback - callback when firmware was loaded
- *
- * If loaded successfully, copies the firmware into buffers
- * for the card to fetch (via DMA).
- */
-static void
-il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
-{
- struct il_priv *il = context;
- struct il_ucode_header *ucode;
- int err;
- struct il4965_firmware_pieces pieces;
- const unsigned int api_max = il->cfg->ucode_api_max;
- const unsigned int api_min = il->cfg->ucode_api_min;
- u32 api_ver;
-
- u32 max_probe_length = 200;
- u32 standard_phy_calibration_size =
- IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;
-
- memset(&pieces, 0, sizeof(pieces));
-
- if (!ucode_raw) {
- if (il->fw_idx <= il->cfg->ucode_api_max)
- IL_ERR(
- "request for firmware file '%s' failed.\n",
- il->firmware_name);
- goto try_again;
- }
-
- D_INFO("Loaded firmware file '%s' (%zd bytes).\n",
- il->firmware_name, ucode_raw->size);
-
- /* Make sure that we got at least the API version number */
- if (ucode_raw->size < 4) {
- IL_ERR("File size way too small!\n");
- goto try_again;
- }
-
- /* Data from ucode file: header followed by uCode images */
- ucode = (struct il_ucode_header *)ucode_raw->data;
-
- err = il4965_load_firmware(il, ucode_raw, &pieces);
-
- if (err)
- goto try_again;
-
- api_ver = IL_UCODE_API(il->ucode_ver);
-
- /*
- * api_ver should match the api version forming part of the
- * firmware filename ... but we don't check for that and only rely
- * on the API version read from firmware header from here on forward
- */
- if (api_ver < api_min || api_ver > api_max) {
- IL_ERR(
- "Driver unable to support your firmware API. "
- "Driver supports v%u, firmware is v%u.\n",
- api_max, api_ver);
- goto try_again;
- }
-
- if (api_ver != api_max)
- IL_ERR(
- "Firmware has old API version. Expected v%u, "
- "got v%u. New firmware can be obtained "
- "from http://www.intellinuxwireless.org.\n",
- api_max, api_ver);
-
- IL_INFO("loaded firmware version %u.%u.%u.%u\n",
- IL_UCODE_MAJOR(il->ucode_ver),
- IL_UCODE_MINOR(il->ucode_ver),
- IL_UCODE_API(il->ucode_ver),
- IL_UCODE_SERIAL(il->ucode_ver));
-
- snprintf(il->hw->wiphy->fw_version,
- sizeof(il->hw->wiphy->fw_version),
- "%u.%u.%u.%u",
- IL_UCODE_MAJOR(il->ucode_ver),
- IL_UCODE_MINOR(il->ucode_ver),
- IL_UCODE_API(il->ucode_ver),
- IL_UCODE_SERIAL(il->ucode_ver));
-
- /*
- * For any of the failures below (before allocating pci memory)
- * we will try to load a version with a smaller API -- maybe the
- * user just got a corrupted version of the latest API.
- */
-
- D_INFO("f/w package hdr ucode version raw = 0x%x\n",
- il->ucode_ver);
- D_INFO("f/w package hdr runtime inst size = %Zd\n",
- pieces.inst_size);
- D_INFO("f/w package hdr runtime data size = %Zd\n",
- pieces.data_size);
- D_INFO("f/w package hdr init inst size = %Zd\n",
- pieces.init_size);
- D_INFO("f/w package hdr init data size = %Zd\n",
- pieces.init_data_size);
- D_INFO("f/w package hdr boot inst size = %Zd\n",
- pieces.boot_size);
-
- /* Verify that uCode images will fit in card's SRAM */
- if (pieces.inst_size > il->hw_params.max_inst_size) {
- IL_ERR("uCode instr len %Zd too large to fit in\n",
- pieces.inst_size);
- goto try_again;
- }
-
- if (pieces.data_size > il->hw_params.max_data_size) {
- IL_ERR("uCode data len %Zd too large to fit in\n",
- pieces.data_size);
- goto try_again;
- }
-
- if (pieces.init_size > il->hw_params.max_inst_size) {
- IL_ERR("uCode init instr len %Zd too large to fit in\n",
- pieces.init_size);
- goto try_again;
- }
-
- if (pieces.init_data_size > il->hw_params.max_data_size) {
- IL_ERR("uCode init data len %Zd too large to fit in\n",
- pieces.init_data_size);
- goto try_again;
- }
-
- if (pieces.boot_size > il->hw_params.max_bsm_size) {
- IL_ERR("uCode boot instr len %Zd too large to fit in\n",
- pieces.boot_size);
- goto try_again;
- }
-
- /* Allocate ucode buffers for card's bus-master loading ... */
-
- /* Runtime instructions and 2 copies of data:
- * 1) unmodified from disk
- * 2) backup cache for save/restore during power-downs */
- il->ucode_code.len = pieces.inst_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_code);
-
- il->ucode_data.len = pieces.data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_data);
-
- il->ucode_data_backup.len = pieces.data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);
-
- if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
- !il->ucode_data_backup.v_addr)
- goto err_pci_alloc;
-
- /* Initialization instructions and data */
- if (pieces.init_size && pieces.init_data_size) {
- il->ucode_init.len = pieces.init_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_init);
-
- il->ucode_init_data.len = pieces.init_data_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);
-
- if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
- goto err_pci_alloc;
- }
-
- /* Bootstrap (instructions only, no data) */
- if (pieces.boot_size) {
- il->ucode_boot.len = pieces.boot_size;
- il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);
-
- if (!il->ucode_boot.v_addr)
- goto err_pci_alloc;
- }
-
- /* Now that we can no longer fail, copy information */
-
- il->sta_key_max_num = STA_KEY_MAX_NUM;
-
- /* Copy images into buffers for card's bus-master reads ... */
-
- /* Runtime instructions (first block of data in file) */
- D_INFO("Copying (but not loading) uCode instr len %Zd\n",
- pieces.inst_size);
- memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);
-
- D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
- il->ucode_code.v_addr, (u32)il->ucode_code.p_addr);
-
- /*
- * Runtime data
- * NOTE: Copy into backup buffer will be done in il_up()
- */
- D_INFO("Copying (but not loading) uCode data len %Zd\n",
- pieces.data_size);
- memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
- memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);
-
- /* Initialization instructions */
- if (pieces.init_size) {
- D_INFO(
- "Copying (but not loading) init instr len %Zd\n",
- pieces.init_size);
- memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
- }
-
- /* Initialization data */
- if (pieces.init_data_size) {
- D_INFO(
- "Copying (but not loading) init data len %Zd\n",
- pieces.init_data_size);
- memcpy(il->ucode_init_data.v_addr, pieces.init_data,
- pieces.init_data_size);
- }
-
- /* Bootstrap instructions */
- D_INFO("Copying (but not loading) boot instr len %Zd\n",
- pieces.boot_size);
- memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);
-
- /*
- * figure out the offset of chain noise reset and gain commands
- * base on the size of standard phy calibration commands table size
- */
- il->_4965.phy_calib_chain_noise_reset_cmd =
- standard_phy_calibration_size;
- il->_4965.phy_calib_chain_noise_gain_cmd =
- standard_phy_calibration_size + 1;
-
- /**************************************************
- * This is still part of probe() in a sense...
- *
- * 9. Setup and register with mac80211 and debugfs
- **************************************************/
- err = il4965_mac_setup_register(il, max_probe_length);
- if (err)
- goto out_unbind;
-
- err = il_dbgfs_register(il, DRV_NAME);
- if (err)
- IL_ERR(
- "failed to create debugfs files. Ignoring error: %d\n", err);
-
- err = sysfs_create_group(&il->pci_dev->dev.kobj,
- &il_attribute_group);
- if (err) {
- IL_ERR("failed to create sysfs device attributes\n");
- goto out_unbind;
- }
-
- /* We have our copies now, allow OS release its copies */
- release_firmware(ucode_raw);
- complete(&il->_4965.firmware_loading_complete);
- return;
-
- try_again:
- /* try next, if any */
- if (il4965_request_firmware(il, false))
- goto out_unbind;
- release_firmware(ucode_raw);
- return;
-
- err_pci_alloc:
- IL_ERR("failed to allocate pci memory\n");
- il4965_dealloc_ucode_pci(il);
- out_unbind:
- complete(&il->_4965.firmware_loading_complete);
- device_release_driver(&il->pci_dev->dev);
- release_firmware(ucode_raw);
-}
-
-static const char * const desc_lookup_text[] = {
- "OK",
- "FAIL",
- "BAD_PARAM",
- "BAD_CHECKSUM",
- "NMI_INTERRUPT_WDG",
- "SYSASSERT",
- "FATAL_ERROR",
- "BAD_COMMAND",
- "HW_ERROR_TUNE_LOCK",
- "HW_ERROR_TEMPERATURE",
- "ILLEGAL_CHAN_FREQ",
- "VCC_NOT_STBL",
- "FH_ERROR",
- "NMI_INTERRUPT_HOST",
- "NMI_INTERRUPT_ACTION_PT",
- "NMI_INTERRUPT_UNKNOWN",
- "UCODE_VERSION_MISMATCH",
- "HW_ERROR_ABS_LOCK",
- "HW_ERROR_CAL_LOCK_FAIL",
- "NMI_INTERRUPT_INST_ACTION_PT",
- "NMI_INTERRUPT_DATA_ACTION_PT",
- "NMI_TRM_HW_ER",
- "NMI_INTERRUPT_TRM",
- "NMI_INTERRUPT_BREAK_POINT",
- "DEBUG_0",
- "DEBUG_1",
- "DEBUG_2",
- "DEBUG_3",
-};
-
-static struct { char *name; u8 num; } advanced_lookup[] = {
- { "NMI_INTERRUPT_WDG", 0x34 },
- { "SYSASSERT", 0x35 },
- { "UCODE_VERSION_MISMATCH", 0x37 },
- { "BAD_COMMAND", 0x38 },
- { "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C },
- { "FATAL_ERROR", 0x3D },
- { "NMI_TRM_HW_ERR", 0x46 },
- { "NMI_INTERRUPT_TRM", 0x4C },
- { "NMI_INTERRUPT_BREAK_POINT", 0x54 },
- { "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C },
- { "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64 },
- { "NMI_INTERRUPT_HOST", 0x66 },
- { "NMI_INTERRUPT_ACTION_PT", 0x7C },
- { "NMI_INTERRUPT_UNKNOWN", 0x84 },
- { "NMI_INTERRUPT_INST_ACTION_PT", 0x86 },
- { "ADVANCED_SYSASSERT", 0 },
-};
-
-static const char *il4965_desc_lookup(u32 num)
-{
- int i;
- int max = ARRAY_SIZE(desc_lookup_text);
-
- if (num < max)
- return desc_lookup_text[num];
-
- max = ARRAY_SIZE(advanced_lookup) - 1;
- for (i = 0; i < max; i++) {
- if (advanced_lookup[i].num == num)
- break;
- }
- return advanced_lookup[i].name;
-}
-
-#define ERROR_START_OFFSET (1 * sizeof(u32))
-#define ERROR_ELEM_SIZE (7 * sizeof(u32))
-
-void il4965_dump_nic_error_log(struct il_priv *il)
-{
- u32 data2, line;
- u32 desc, time, count, base, data1;
- u32 blink1, blink2, ilink1, ilink2;
- u32 pc, hcmd;
-
- if (il->ucode_type == UCODE_INIT) {
- base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
- } else {
- base = le32_to_cpu(il->card_alive.error_event_table_ptr);
- }
-
- if (!il->cfg->ops->lib->is_valid_rtc_data_addr(base)) {
- IL_ERR(
- "Not valid error log pointer 0x%08X for %s uCode\n",
- base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
- return;
- }
-
- count = il_read_targ_mem(il, base);
-
- if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
- IL_ERR("Start IWL Error Log Dump:\n");
- IL_ERR("Status: 0x%08lX, count: %d\n",
- il->status, count);
- }
-
- desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
- il->isr_stats.err_code = desc;
- pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
- blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
- blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
- ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
- ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
- data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
- data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
- line = il_read_targ_mem(il, base + 9 * sizeof(u32));
- time = il_read_targ_mem(il, base + 11 * sizeof(u32));
- hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));
-
- IL_ERR("Desc Time "
- "data1 data2 line\n");
- IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
- il4965_desc_lookup(desc), desc, time, data1, data2, line);
- IL_ERR("pc blink1 blink2 ilink1 ilink2 hcmd\n");
- IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n",
- pc, blink1, blink2, ilink1, ilink2, hcmd);
-}
-
-static void il4965_rf_kill_ct_config(struct il_priv *il)
-{
- struct il_ct_kill_config cmd;
- unsigned long flags;
- int ret = 0;
-
- spin_lock_irqsave(&il->lock, flags);
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
- spin_unlock_irqrestore(&il->lock, flags);
-
- cmd.critical_temperature_R =
- cpu_to_le32(il->hw_params.ct_kill_threshold);
-
- ret = il_send_cmd_pdu(il, REPLY_CT_KILL_CONFIG_CMD,
- sizeof(cmd), &cmd);
- if (ret)
- IL_ERR("REPLY_CT_KILL_CONFIG_CMD failed\n");
- else
- D_INFO("REPLY_CT_KILL_CONFIG_CMD "
- "succeeded, "
- "critical temperature is %d\n",
- il->hw_params.ct_kill_threshold);
-}
-
-static const s8 default_queue_to_tx_fifo[] = {
- IL_TX_FIFO_VO,
- IL_TX_FIFO_VI,
- IL_TX_FIFO_BE,
- IL_TX_FIFO_BK,
- IL49_CMD_FIFO_NUM,
- IL_TX_FIFO_UNUSED,
- IL_TX_FIFO_UNUSED,
-};
-
-static int il4965_alive_notify(struct il_priv *il)
-{
- u32 a;
- unsigned long flags;
- int i, chan;
- u32 reg_val;
-
- spin_lock_irqsave(&il->lock, flags);
-
- /* Clear 4965's internal Tx Scheduler data base */
- il->scd_base_addr = il_rd_prph(il,
- IL49_SCD_SRAM_BASE_ADDR);
- a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
- for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
- il_write_targ_mem(il, a, 0);
- for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
- il_write_targ_mem(il, a, 0);
- for (; a < il->scd_base_addr +
- IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num); a += 4)
- il_write_targ_mem(il, a, 0);
-
- /* Tel 4965 where to find Tx byte count tables */
- il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR,
- il->scd_bc_tbls.dma >> 10);
-
- /* Enable DMA channel */
- for (chan = 0; chan < FH49_TCSR_CHNL_NUM ; chan++)
- il_wr(il,
- FH_TCSR_CHNL_TX_CONFIG_REG(chan),
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
- FH_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);
-
- /* Update FH chicken bits */
- reg_val = il_rd(il, FH_TX_CHICKEN_BITS_REG);
- il_wr(il, FH_TX_CHICKEN_BITS_REG,
- reg_val | FH_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);
-
- /* Disable chain mode for all queues */
- il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);
-
- /* Initialize each Tx queue (including the command queue) */
- for (i = 0; i < il->hw_params.max_txq_num; i++) {
-
- /* TFD circular buffer read/write idxes */
- il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
- il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));
-
- /* Max Tx Window size for Scheduler-ACK mode */
- il_write_targ_mem(il, il->scd_base_addr +
- IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
- (SCD_WIN_SIZE <<
- IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
- IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);
-
- /* Frame limit */
- il_write_targ_mem(il, il->scd_base_addr +
- IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
- sizeof(u32),
- (SCD_FRAME_LIMIT <<
- IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
- IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);
-
- }
- il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
- (1 << il->hw_params.max_txq_num) - 1);
-
- /* Activate all Tx DMA/FIFO channels */
- il4965_txq_set_sched(il, IL_MASK(0, 6));
-
- il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);
-
- /* make sure all queue are not stopped */
- memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
- for (i = 0; i < 4; i++)
- atomic_set(&il->queue_stop_count[i], 0);
-
- /* reset to 0 to enable all the queue first */
- il->txq_ctx_active_msk = 0;
- /* Map each Tx/cmd queue to its corresponding fifo */
- BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);
-
- for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
- int ac = default_queue_to_tx_fifo[i];
-
- il_txq_ctx_activate(il, i);
-
- if (ac == IL_TX_FIFO_UNUSED)
- continue;
-
- il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
- }
-
- spin_unlock_irqrestore(&il->lock, flags);
-
- return 0;
-}
-
-/**
- * il4965_alive_start - called after REPLY_ALIVE notification received
- * from protocol/runtime uCode (initialization uCode's
- * Alive gets handled by il_init_alive_start()).
- */
-static void il4965_alive_start(struct il_priv *il)
-{
- int ret = 0;
- struct il_rxon_context *ctx = &il->ctx;
-
- D_INFO("Runtime Alive received.\n");
-
- if (il->card_alive.is_valid != UCODE_VALID_OK) {
- /* We had an error bringing up the hardware, so take it
- * all the way back down so we can try again */
- D_INFO("Alive failed.\n");
- goto restart;
- }
-
- /* Initialize uCode has loaded Runtime uCode ... verify inst image.
- * This is a paranoid check, because we would not have gotten the
- * "runtime" alive if code weren't properly loaded. */
- if (il4965_verify_ucode(il)) {
- /* Runtime instruction load was bad;
- * take it all the way back down so we can try again */
- D_INFO("Bad runtime uCode load.\n");
- goto restart;
- }
-
- ret = il4965_alive_notify(il);
- if (ret) {
- IL_WARN(
- "Could not complete ALIVE transition [ntf]: %d\n", ret);
- goto restart;
- }
-
-
- /* After the ALIVE response, we can send host commands to the uCode */
- set_bit(STATUS_ALIVE, &il->status);
-
- /* Enable watchdog to monitor the driver tx queues */
- il_setup_watchdog(il);
-
- if (il_is_rfkill(il))
- return;
-
- ieee80211_wake_queues(il->hw);
-
- il->active_rate = RATES_MASK;
-
- if (il_is_associated_ctx(ctx)) {
- struct il_rxon_cmd *active_rxon =
- (struct il_rxon_cmd *)&ctx->active;
- /* apply any changes in staging */
- ctx->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
- active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
- } else {
- /* Initialize our rx_config data */
- il_connection_init_rx_config(il, &il->ctx);
-
- if (il->cfg->ops->hcmd->set_rxon_chain)
- il->cfg->ops->hcmd->set_rxon_chain(il, ctx);
- }
-
- /* Configure bluetooth coexistence if enabled */
- il_send_bt_config(il);
-
- il4965_reset_run_time_calib(il);
-
- set_bit(STATUS_READY, &il->status);
-
- /* Configure the adapter for unassociated operation */
- il_commit_rxon(il, ctx);
-
- /* At this point, the NIC is initialized and operational */
- il4965_rf_kill_ct_config(il);
-
- D_INFO("ALIVE processing complete.\n");
- wake_up(&il->wait_command_queue);
-
- il_power_update_mode(il, true);
- D_INFO("Updated power mode\n");
-
- return;
-
- restart:
- queue_work(il->workqueue, &il->restart);
-}
-
-static void il4965_cancel_deferred_work(struct il_priv *il);
-
-static void __il4965_down(struct il_priv *il)
-{
- unsigned long flags;
- int exit_pending;
-
- D_INFO(DRV_NAME " is going down\n");
-
- il_scan_cancel_timeout(il, 200);
-
- exit_pending = test_and_set_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* Stop TX queues watchdog. We need to have STATUS_EXIT_PENDING bit set
- * to prevent rearm timer */
- del_timer_sync(&il->watchdog);
-
- il_clear_ucode_stations(il, NULL);
- il_dealloc_bcast_stations(il);
- il_clear_driver_stations(il);
-
- /* Unblock any waiting calls */
- wake_up_all(&il->wait_command_queue);
-
- /* Wipe out the EXIT_PENDING status bit if we are not actually
- * exiting the module */
- if (!exit_pending)
- clear_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* stop and reset the on-board processor */
- _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- /* tell the device to stop sending interrupts */
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
- il4965_synchronize_irq(il);
-
- if (il->mac80211_registered)
- ieee80211_stop_queues(il->hw);
-
- /* If we have not previously called il_init() then
- * clear all bits but the RF Kill bit and return */
- if (!il_is_init(il)) {
- il->status = test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
- goto exit;
- }
-
- /* ...otherwise clear out all the status bits but the RF Kill
- * bit and continue taking the NIC down. */
- il->status &= test_bit(STATUS_RF_KILL_HW, &il->status) <<
- STATUS_RF_KILL_HW |
- test_bit(STATUS_GEO_CONFIGURED, &il->status) <<
- STATUS_GEO_CONFIGURED |
- test_bit(STATUS_FW_ERROR, &il->status) <<
- STATUS_FW_ERROR |
- test_bit(STATUS_EXIT_PENDING, &il->status) <<
- STATUS_EXIT_PENDING;
-
- il4965_txq_ctx_stop(il);
- il4965_rxq_stop(il);
-
- /* Power-down device's busmaster DMA clocks */
- il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
- udelay(5);
-
- /* Make sure (redundant) we've released our request to stay awake */
- il_clear_bit(il, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
-
- /* Stop the device, and put it in low power state */
- il_apm_stop(il);
-
- exit:
- memset(&il->card_alive, 0, sizeof(struct il_alive_resp));
-
- dev_kfree_skb(il->beacon_skb);
- il->beacon_skb = NULL;
-
- /* clear out any free frames */
- il4965_clear_free_frames(il);
-}
-
-static void il4965_down(struct il_priv *il)
-{
- mutex_lock(&il->mutex);
- __il4965_down(il);
- mutex_unlock(&il->mutex);
-
- il4965_cancel_deferred_work(il);
-}
-
-#define HW_READY_TIMEOUT (50)
-
-static int il4965_set_hw_ready(struct il_priv *il)
-{
- int ret = 0;
-
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);
-
- /* See if we got it */
- ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
- HW_READY_TIMEOUT);
- if (ret != -ETIMEDOUT)
- il->hw_ready = true;
- else
- il->hw_ready = false;
-
- D_INFO("hardware %s\n",
- (il->hw_ready == 1) ? "ready" : "not ready");
- return ret;
-}
-
-static int il4965_prepare_card_hw(struct il_priv *il)
-{
- int ret = 0;
-
- D_INFO("il4965_prepare_card_hw enter\n");
-
- ret = il4965_set_hw_ready(il);
- if (il->hw_ready)
- return ret;
-
- /* If HW is not ready, prepare the conditions to check again */
- il_set_bit(il, CSR_HW_IF_CONFIG_REG,
- CSR_HW_IF_CONFIG_REG_PREPARE);
-
- ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
- ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
- CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);
-
- /* HW should be ready by now, check again. */
- if (ret != -ETIMEDOUT)
- il4965_set_hw_ready(il);
-
- return ret;
-}
-
-#define MAX_HW_RESTARTS 5
-
-static int __il4965_up(struct il_priv *il)
-{
- int i;
- int ret;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
- IL_WARN("Exit pending; will not bring the NIC up\n");
- return -EIO;
- }
-
- if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
- IL_ERR("ucode not available for device bringup\n");
- return -EIO;
- }
-
- ret = il4965_alloc_bcast_station(il, &il->ctx);
- if (ret) {
- il_dealloc_bcast_stations(il);
- return ret;
- }
-
- il4965_prepare_card_hw(il);
-
- if (!il->hw_ready) {
- IL_WARN("Exit HW not ready\n");
- return -EIO;
- }
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (_il_rd(il,
- CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
- else
- set_bit(STATUS_RF_KILL_HW, &il->status);
-
- if (il_is_rfkill(il)) {
- wiphy_rfkill_set_hw_state(il->hw->wiphy, true);
-
- il_enable_interrupts(il);
- IL_WARN("Radio disabled by HW RF Kill switch\n");
- return 0;
- }
-
- _il_wr(il, CSR_INT, 0xFFFFFFFF);
-
- /* must be initialised before il_hw_nic_init */
- il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;
-
- ret = il4965_hw_nic_init(il);
- if (ret) {
- IL_ERR("Unable to init nic\n");
- return ret;
- }
-
- /* make sure rfkill handshake bits are cleared */
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
- CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
-
- /* clear (again), then enable host interrupts */
- _il_wr(il, CSR_INT, 0xFFFFFFFF);
- il_enable_interrupts(il);
-
- /* really make sure rfkill handshake bits are cleared */
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
- _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
-
- /* Copy original ucode data image from disk into backup cache.
- * This will be used to initialize the on-board processor's
- * data SRAM for a clean start when the runtime program first loads. */
- memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
- il->ucode_data.len);
-
- for (i = 0; i < MAX_HW_RESTARTS; i++) {
-
- /* load bootstrap state machine,
- * load bootstrap program into processor's memory,
- * prepare to load the "initialize" uCode */
- ret = il->cfg->ops->lib->load_ucode(il);
-
- if (ret) {
- IL_ERR("Unable to set up bootstrap uCode: %d\n",
- ret);
- continue;
- }
-
- /* start card; "initialize" will load runtime ucode */
- il4965_nic_start(il);
-
- D_INFO(DRV_NAME " is coming up\n");
-
- return 0;
- }
-
- set_bit(STATUS_EXIT_PENDING, &il->status);
- __il4965_down(il);
- clear_bit(STATUS_EXIT_PENDING, &il->status);
-
- /* tried to restart and config the device for as long as our
- * patience could withstand */
- IL_ERR("Unable to initialize device after %d attempts.\n", i);
- return -EIO;
-}
-
-
-/*****************************************************************************
- *
- * Workqueue callbacks
- *
- *****************************************************************************/
-
-static void il4965_bg_init_alive_start(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, init_alive_start.work);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- goto out;
-
- il->cfg->ops->lib->init_alive_start(il);
-out:
- mutex_unlock(&il->mutex);
-}
-
-static void il4965_bg_alive_start(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, alive_start.work);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- goto out;
-
- il4965_alive_start(il);
-out:
- mutex_unlock(&il->mutex);
-}
-
-static void il4965_bg_run_time_calib_work(struct work_struct *work)
-{
- struct il_priv *il = container_of(work, struct il_priv,
- run_time_calib_work);
-
- mutex_lock(&il->mutex);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status)) {
- mutex_unlock(&il->mutex);
- return;
- }
-
- if (il->start_calib) {
- il4965_chain_noise_calibration(il,
- (void *)&il->_4965.stats);
- il4965_sensitivity_calibration(il,
- (void *)&il->_4965.stats);
- }
-
- mutex_unlock(&il->mutex);
-}
-
-static void il4965_bg_restart(struct work_struct *data)
-{
- struct il_priv *il = container_of(data, struct il_priv, restart);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- if (test_and_clear_bit(STATUS_FW_ERROR, &il->status)) {
- mutex_lock(&il->mutex);
- il->ctx.vif = NULL;
- il->is_open = 0;
-
- __il4965_down(il);
-
- mutex_unlock(&il->mutex);
- il4965_cancel_deferred_work(il);
- ieee80211_restart_hw(il->hw);
- } else {
- il4965_down(il);
-
- mutex_lock(&il->mutex);
- if (test_bit(STATUS_EXIT_PENDING, &il->status)) {
- mutex_unlock(&il->mutex);
- return;
- }
-
- __il4965_up(il);
- mutex_unlock(&il->mutex);
- }
-}
-
-static void il4965_bg_rx_replenish(struct work_struct *data)
-{
- struct il_priv *il =
- container_of(data, struct il_priv, rx_replenish);
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- return;
-
- mutex_lock(&il->mutex);
- il4965_rx_replenish(il);
- mutex_unlock(&il->mutex);
-}
-
-/*****************************************************************************
- *
- * mac80211 entry point functions
- *
- *****************************************************************************/
-
-#define UCODE_READY_TIMEOUT (4 * HZ)
-
-/*
- * Not a mac80211 entry point function, but it fits in with all the
- * other mac80211 functions grouped here.
- */
-static int il4965_mac_setup_register(struct il_priv *il,
- u32 max_probe_length)
-{
- int ret;
- struct ieee80211_hw *hw = il->hw;
-
- hw->rate_control_algorithm = "iwl-4965-rs";
-
- /* Tell mac80211 our characteristics */
- hw->flags = IEEE80211_HW_SIGNAL_DBM |
- IEEE80211_HW_AMPDU_AGGREGATION |
- IEEE80211_HW_NEED_DTIM_PERIOD |
- IEEE80211_HW_SPECTRUM_MGMT |
- IEEE80211_HW_REPORTS_TX_ACK_STATUS;
-
- if (il->cfg->sku & IL_SKU_N)
- hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS |
- IEEE80211_HW_SUPPORTS_STATIC_SMPS;
-
- hw->sta_data_size = sizeof(struct il_station_priv);
- hw->vif_data_size = sizeof(struct il_vif_priv);
-
- hw->wiphy->interface_modes |= il->ctx.interface_modes;
- hw->wiphy->interface_modes |= il->ctx.exclusive_interface_modes;
-
- hw->wiphy->flags |= WIPHY_FLAG_CUSTOM_REGULATORY |
- WIPHY_FLAG_DISABLE_BEACON_HINTS;
-
- /*
- * For now, disable PS by default because it affects
- * RX performance significantly.
- */
- hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
-
- hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
- /* we create the 802.11 header and a zero-length SSID element */
- hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;
-
- /* Default value; 4 EDCA QOS priorities */
- hw->queues = 4;
-
- hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;
-
- if (il->bands[IEEE80211_BAND_2GHZ].n_channels)
- il->hw->wiphy->bands[IEEE80211_BAND_2GHZ] =
- &il->bands[IEEE80211_BAND_2GHZ];
- if (il->bands[IEEE80211_BAND_5GHZ].n_channels)
- il->hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
- &il->bands[IEEE80211_BAND_5GHZ];
-
- il_leds_init(il);
-
- ret = ieee80211_register_hw(il->hw);
- if (ret) {
- IL_ERR("Failed to register hw (error %d)\n", ret);
- return ret;
- }
- il->mac80211_registered = 1;
-
- return 0;
-}
-
-
-int il4965_mac_start(struct ieee80211_hw *hw)
-{
- struct il_priv *il = hw->priv;
- int ret;
-
- D_MAC80211("enter\n");
-
- /* we should be verifying the device is ready to be opened */
- mutex_lock(&il->mutex);
- ret = __il4965_up(il);
- mutex_unlock(&il->mutex);
-
- if (ret)
- return ret;
-
- if (il_is_rfkill(il))
- goto out;
-
- D_INFO("Start UP work done.\n");
-
- /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
- * mac80211 will not be run successfully. */
- ret = wait_event_timeout(il->wait_command_queue,
- test_bit(STATUS_READY, &il->status),
- UCODE_READY_TIMEOUT);
- if (!ret) {
- if (!test_bit(STATUS_READY, &il->status)) {
- IL_ERR("START_ALIVE timeout after %dms.\n",
- jiffies_to_msecs(UCODE_READY_TIMEOUT));
- return -ETIMEDOUT;
- }
- }
-
- il4965_led_enable(il);
-
-out:
- il->is_open = 1;
- D_MAC80211("leave\n");
- return 0;
-}
-
-void il4965_mac_stop(struct ieee80211_hw *hw)
-{
- struct il_priv *il = hw->priv;
-
- D_MAC80211("enter\n");
-
- if (!il->is_open)
- return;
-
- il->is_open = 0;
-
- il4965_down(il);
-
- flush_workqueue(il->workqueue);
-
- /* User space software may expect getting rfkill changes
- * even if interface is down */
- _il_wr(il, CSR_INT, 0xFFFFFFFF);
- il_enable_rfkill_int(il);
-
- D_MAC80211("leave\n");
-}
-
-void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb)
-{
- struct il_priv *il = hw->priv;
-
- D_MACDUMP("enter\n");
-
- D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
- ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);
-
- if (il4965_tx_skb(il, skb))
- dev_kfree_skb_any(skb);
-
- D_MACDUMP("leave\n");
-}
-
-void il4965_mac_update_tkip_key(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_key_conf *keyconf,
- struct ieee80211_sta *sta,
- u32 iv32, u16 *phase1key)
-{
- struct il_priv *il = hw->priv;
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
-
- D_MAC80211("enter\n");
-
- il4965_update_tkip_key(il, vif_priv->ctx, keyconf, sta,
- iv32, phase1key);
-
- D_MAC80211("leave\n");
-}
-
-int il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
- struct ieee80211_vif *vif, struct ieee80211_sta *sta,
- struct ieee80211_key_conf *key)
-{
- struct il_priv *il = hw->priv;
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
- struct il_rxon_context *ctx = vif_priv->ctx;
- int ret;
- u8 sta_id;
- bool is_default_wep_key = false;
-
- D_MAC80211("enter\n");
-
- if (il->cfg->mod_params->sw_crypto) {
- D_MAC80211("leave - hwcrypto disabled\n");
- return -EOPNOTSUPP;
- }
-
- sta_id = il_sta_id_or_broadcast(il, vif_priv->ctx, sta);
- if (sta_id == IL_INVALID_STATION)
- return -EINVAL;
-
- mutex_lock(&il->mutex);
- il_scan_cancel_timeout(il, 100);
-
- /*
- * If we are getting WEP group key and we didn't receive any key mapping
- * so far, we are in legacy wep mode (group key only), otherwise we are
- * in 1X mode.
- * In legacy wep mode, we use another host command to the uCode.
- */
- if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
- key->cipher == WLAN_CIPHER_SUITE_WEP104) &&
- !sta) {
- if (cmd == SET_KEY)
- is_default_wep_key = !ctx->key_mapping_keys;
- else
- is_default_wep_key =
- (key->hw_key_idx == HW_KEY_DEFAULT);
- }
-
- switch (cmd) {
- case SET_KEY:
- if (is_default_wep_key)
- ret = il4965_set_default_wep_key(il,
- vif_priv->ctx, key);
- else
- ret = il4965_set_dynamic_key(il, vif_priv->ctx,
- key, sta_id);
-
- D_MAC80211("enable hwcrypto key\n");
- break;
- case DISABLE_KEY:
- if (is_default_wep_key)
- ret = il4965_remove_default_wep_key(il, ctx, key);
- else
- ret = il4965_remove_dynamic_key(il, ctx,
- key, sta_id);
-
- D_MAC80211("disable hwcrypto key\n");
- break;
- default:
- ret = -EINVAL;
- }
-
- mutex_unlock(&il->mutex);
- D_MAC80211("leave\n");
-
- return ret;
-}
-
-int il4965_mac_ampdu_action(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- enum ieee80211_ampdu_mlme_action action,
- struct ieee80211_sta *sta, u16 tid, u16 *ssn,
- u8 buf_size)
-{
- struct il_priv *il = hw->priv;
- int ret = -EINVAL;
-
- D_HT("A-MPDU action on addr %pM tid %d\n",
- sta->addr, tid);
-
- if (!(il->cfg->sku & IL_SKU_N))
- return -EACCES;
-
- mutex_lock(&il->mutex);
-
- switch (action) {
- case IEEE80211_AMPDU_RX_START:
- D_HT("start Rx\n");
- ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
- break;
- case IEEE80211_AMPDU_RX_STOP:
- D_HT("stop Rx\n");
- ret = il4965_sta_rx_agg_stop(il, sta, tid);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- ret = 0;
- break;
- case IEEE80211_AMPDU_TX_START:
- D_HT("start Tx\n");
- ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
- break;
- case IEEE80211_AMPDU_TX_STOP:
- D_HT("stop Tx\n");
- ret = il4965_tx_agg_stop(il, vif, sta, tid);
- if (test_bit(STATUS_EXIT_PENDING, &il->status))
- ret = 0;
- break;
- case IEEE80211_AMPDU_TX_OPERATIONAL:
- ret = 0;
- break;
- }
- mutex_unlock(&il->mutex);
-
- return ret;
-}
-
-int il4965_mac_sta_add(struct ieee80211_hw *hw,
- struct ieee80211_vif *vif,
- struct ieee80211_sta *sta)
-{
- struct il_priv *il = hw->priv;
- struct il_station_priv *sta_priv = (void *)sta->drv_priv;
- struct il_vif_priv *vif_priv = (void *)vif->drv_priv;
- bool is_ap = vif->type == NL80211_IFTYPE_STATION;
- int ret;
- u8 sta_id;
-
- D_INFO("received request to add station %pM\n",
- sta->addr);
- mutex_lock(&il->mutex);
- D_INFO("proceeding to add station %pM\n",
- sta->addr);
- sta_priv->common.sta_id = IL_INVALID_STATION;
-
- atomic_set(&sta_priv->pending_frames, 0);
-
- ret = il_add_station_common(il, vif_priv->ctx, sta->addr,
- is_ap, sta, &sta_id);
- if (ret) {
- IL_ERR("Unable to add station %pM (%d)\n",
- sta->addr, ret);
- /* Should we return success if return code is EEXIST ? */
- mutex_unlock(&il->mutex);
- return ret;
- }
-
- sta_priv->common.sta_id = sta_id;
-
- /* Initialize rate scaling */
- D_INFO("Initializing rate scaling for station %pM\n",
- sta->addr);
- il4965_rs_rate_init(il, sta, sta_id);
- mutex_unlock(&il->mutex);
-
- return 0;
-}
-
-void il4965_mac_channel_switch(struct ieee80211_hw *hw,
- struct ieee80211_channel_switch *ch_switch)
-{
- struct il_priv *il = hw->priv;
- const struct il_channel_info *ch_info;
- struct ieee80211_conf *conf = &hw->conf;
- struct ieee80211_channel *channel = ch_switch->channel;
- struct il_ht_config *ht_conf = &il->current_ht_config;
-
- struct il_rxon_context *ctx = &il->ctx;
- u16 ch;
-
- D_MAC80211("enter\n");
-
- mutex_lock(&il->mutex);
-
- if (il_is_rfkill(il))
- goto out;
-
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status) ||
- test_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status))
- goto out;
-
- if (!il_is_associated_ctx(ctx))
- goto out;
-
- if (!il->cfg->ops->lib->set_channel_switch)
- goto out;
-
- ch = channel->hw_value;
- if (le16_to_cpu(ctx->active.channel) == ch)
- goto out;
-
- ch_info = il_get_channel_info(il, channel->band, ch);
- if (!il_is_channel_valid(ch_info)) {
- D_MAC80211("invalid channel\n");
- goto out;
- }
-
- spin_lock_irq(&il->lock);
-
- il->current_ht_config.smps = conf->smps_mode;
-
- /* Configure HT40 channels */
- ctx->ht.enabled = conf_is_ht(conf);
- if (ctx->ht.enabled) {
- if (conf_is_ht40_minus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_BELOW;
- ctx->ht.is_40mhz = true;
- } else if (conf_is_ht40_plus(conf)) {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
- ctx->ht.is_40mhz = true;
- } else {
- ctx->ht.extension_chan_offset =
- IEEE80211_HT_PARAM_CHA_SEC_NONE;
- ctx->ht.is_40mhz = false;
- }
- } else
- ctx->ht.is_40mhz = false;
-
- if ((le16_to_cpu(ctx->staging.channel) != ch))
- ctx->staging.flags = 0;
-
- il_set_rxon_channel(il, channel, ctx);
- il_set_rxon_ht(il, ht_conf);
- il_set_flags_for_band(il, ctx, channel->band, ctx->vif);
-
- spin_unlock_irq(&il->lock);
-
- il_set_rate(il);
- /*
- * at this point, staging_rxon has the
- * configuration for channel switch
- */
- set_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
- il->switch_channel = cpu_to_le16(ch);
- if (il->cfg->ops->lib->set_channel_switch(il, ch_switch)) {
- clear_bit(STATUS_CHANNEL_SWITCH_PENDING, &il->status);
- il->switch_channel = 0;
- ieee80211_chswitch_done(ctx->vif, false);
- }
-
-out:
- mutex_unlock(&il->mutex);
- D_MAC80211("leave\n");
-}
-
-void il4965_configure_filter(struct ieee80211_hw *hw,
- unsigned int changed_flags,
- unsigned int *total_flags,
- u64 multicast)
-{
- struct il_priv *il = hw->priv;
- __le32 filter_or = 0, filter_nand = 0;
-
-#define CHK(test, flag) do { \
- if (*total_flags & (test)) \
- filter_or |= (flag); \
- else \
- filter_nand |= (flag); \
- } while (0)
-
- D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n",
- changed_flags, *total_flags);
-
- CHK(FIF_OTHER_BSS | FIF_PROMISC_IN_BSS, RXON_FILTER_PROMISC_MSK);
- /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
- CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
- CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);
-
-#undef CHK
-
- mutex_lock(&il->mutex);
-
- il->ctx.staging.filter_flags &= ~filter_nand;
- il->ctx.staging.filter_flags |= filter_or;
-
- /*
- * Not committing directly because hardware can perform a scan,
- * but we'll eventually commit the filter flags change anyway.
- */
-
- mutex_unlock(&il->mutex);
-
- /*
- * Receiving all multicast frames is always enabled by the
- * default flags setup in il_connection_init_rx_config()
- * since we currently do not support programming multicast
- * filters into the device.
- */
- *total_flags &= FIF_OTHER_BSS | FIF_ALLMULTI | FIF_PROMISC_IN_BSS |
- FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
-}
-
-/*****************************************************************************
- *
- * driver setup and teardown
- *
- *****************************************************************************/
-
-static void il4965_bg_txpower_work(struct work_struct *work)
-{
- struct il_priv *il = container_of(work, struct il_priv,
- txpower_work);
-
- mutex_lock(&il->mutex);
-
- /* If a scan happened to start before we got here
- * then just return; the stats notification will
- * kick off another scheduled work to compensate for
- * any temperature delta we missed here. */
- if (test_bit(STATUS_EXIT_PENDING, &il->status) ||
- test_bit(STATUS_SCANNING, &il->status))
- goto out;
-
- /* Regardless of if we are associated, we must reconfigure the
- * TX power since frames can be sent on non-radar channels while
- * not associated */
- il->cfg->ops->lib->send_tx_power(il);
-
- /* Update last_temperature to keep is_calib_needed from running
- * when it isn't needed... */
- il->last_temperature = il->temperature;
-out:
- mutex_unlock(&il->mutex);
-}
-
-static void il4965_setup_deferred_work(struct il_priv *il)
-{
- il->workqueue = create_singlethread_workqueue(DRV_NAME);
-
- init_waitqueue_head(&il->wait_command_queue);
-
- INIT_WORK(&il->restart, il4965_bg_restart);
- INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
- INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
- INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
- INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);
-
- il_setup_scan_deferred_work(il);
-
- INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);
-
- init_timer(&il->stats_periodic);
- il->stats_periodic.data = (unsigned long)il;
- il->stats_periodic.function = il4965_bg_stats_periodic;
-
- init_timer(&il->watchdog);
- il->watchdog.data = (unsigned long)il;
- il->watchdog.function = il_bg_watchdog;
-
- tasklet_init(&il->irq_tasklet, (void (*)(unsigned long))
- il4965_irq_tasklet, (unsigned long)il);
-}
-
-static void il4965_cancel_deferred_work(struct il_priv *il)
-{
- cancel_work_sync(&il->txpower_work);
- cancel_delayed_work_sync(&il->init_alive_start);
- cancel_delayed_work(&il->alive_start);
- cancel_work_sync(&il->run_time_calib_work);
-
- il_cancel_scan_deferred_work(il);
-
- del_timer_sync(&il->stats_periodic);
-}
-
-static void il4965_init_hw_rates(struct il_priv *il,
- struct ieee80211_rate *rates)
-{
- int i;
-
- for (i = 0; i < RATE_COUNT_LEGACY; i++) {
- rates[i].bitrate = il_rates[i].ieee * 5;
- rates[i].hw_value = i; /* Rate scaling will work on idxes */
- rates[i].hw_value_short = i;
- rates[i].flags = 0;
- if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
- /*
- * If CCK != 1M then set short preamble rate flag.
- */
- rates[i].flags |=
- (il_rates[i].plcp == RATE_1M_PLCP) ?
- 0 : IEEE80211_RATE_SHORT_PREAMBLE;
- }
- }
-}
-/*
- * Acquire il->lock before calling this function !
- */
-void il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
-{
- il_wr(il, HBUS_TARG_WRPTR,
- (idx & 0xff) | (txq_id << 8));
- il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
-}
-
-void il4965_tx_queue_set_status(struct il_priv *il,
- struct il_tx_queue *txq,
- int tx_fifo_id, int scd_retry)
-{
- int txq_id = txq->q.id;
-
- /* Find out whether to activate Tx queue */
- int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;
-
- /* Set up and activate */
- il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
- (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
- (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
- (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
- (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
- IL49_SCD_QUEUE_STTS_REG_MSK);
-
- txq->sched_retry = scd_retry;
-
- D_INFO("%s %s Queue %d on AC %d\n",
- active ? "Activate" : "Deactivate",
- scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
-}
-
-
-static int il4965_init_drv(struct il_priv *il)
-{
- int ret;
-
- spin_lock_init(&il->sta_lock);
- spin_lock_init(&il->hcmd_lock);
-
- INIT_LIST_HEAD(&il->free_frames);
-
- mutex_init(&il->mutex);
-
- il->ieee_channels = NULL;
- il->ieee_rates = NULL;
- il->band = IEEE80211_BAND_2GHZ;
-
- il->iw_mode = NL80211_IFTYPE_STATION;
- il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
- il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;
-
- /* initialize force reset */
- il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;
-
- /* Choose which receivers/antennas to use */
- if (il->cfg->ops->hcmd->set_rxon_chain)
- il->cfg->ops->hcmd->set_rxon_chain(il,
- &il->ctx);
-
- il_init_scan_params(il);
-
- ret = il_init_channel_map(il);
- if (ret) {
- IL_ERR("initializing regulatory failed: %d\n", ret);
- goto err;
- }
-
- ret = il_init_geos(il);
- if (ret) {
- IL_ERR("initializing geos failed: %d\n", ret);
- goto err_free_channel_map;
- }
- il4965_init_hw_rates(il, il->ieee_rates);
-
- return 0;
-
-err_free_channel_map:
- il_free_channel_map(il);
-err:
- return ret;
-}
-
-static void il4965_uninit_drv(struct il_priv *il)
-{
- il4965_calib_free_results(il);
- il_free_geos(il);
- il_free_channel_map(il);
- kfree(il->scan_cmd);
-}
-
-static void il4965_hw_detect(struct il_priv *il)
-{
- il->hw_rev = _il_rd(il, CSR_HW_REV);
- il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
- il->rev_id = il->pci_dev->revision;
- D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
-}
-
-static int il4965_set_hw_params(struct il_priv *il)
-{
- il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
- il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
- if (il->cfg->mod_params->amsdu_size_8K)
- il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
- else
- il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);
-
- il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;
-
- if (il->cfg->mod_params->disable_11n)
- il->cfg->sku &= ~IL_SKU_N;
-
- /* Device-specific setup */
- return il->cfg->ops->lib->set_hw_params(il);
-}
-
-static const u8 il4965_bss_ac_to_fifo[] = {
- IL_TX_FIFO_VO,
- IL_TX_FIFO_VI,
- IL_TX_FIFO_BE,
- IL_TX_FIFO_BK,
-};
-
-static const u8 il4965_bss_ac_to_queue[] = {
- 0, 1, 2, 3,
-};
-
-static int
-il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
- int err = 0;
- struct il_priv *il;
- struct ieee80211_hw *hw;
- struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
- unsigned long flags;
- u16 pci_cmd;
-
- /************************
- * 1. Allocating HW data
- ************************/
-
- hw = il_alloc_all(cfg);
- if (!hw) {
- err = -ENOMEM;
- goto out;
- }
- il = hw->priv;
- /* At this point both hw and il are allocated. */
-
- il->ctx.ctxid = 0;
-
- il->ctx.always_active = true;
- il->ctx.is_active = true;
- il->ctx.rxon_cmd = REPLY_RXON;
- il->ctx.rxon_timing_cmd = REPLY_RXON_TIMING;
- il->ctx.rxon_assoc_cmd = REPLY_RXON_ASSOC;
- il->ctx.qos_cmd = REPLY_QOS_PARAM;
- il->ctx.ap_sta_id = IL_AP_ID;
- il->ctx.wep_key_cmd = REPLY_WEPKEY;
- il->ctx.ac_to_fifo = il4965_bss_ac_to_fifo;
- il->ctx.ac_to_queue = il4965_bss_ac_to_queue;
- il->ctx.exclusive_interface_modes =
- BIT(NL80211_IFTYPE_ADHOC);
- il->ctx.interface_modes =
- BIT(NL80211_IFTYPE_STATION);
- il->ctx.ap_devtype = RXON_DEV_TYPE_AP;
- il->ctx.ibss_devtype = RXON_DEV_TYPE_IBSS;
- il->ctx.station_devtype = RXON_DEV_TYPE_ESS;
- il->ctx.unused_devtype = RXON_DEV_TYPE_ESS;
-
- SET_IEEE80211_DEV(hw, &pdev->dev);
-
- D_INFO("*** LOAD DRIVER ***\n");
- il->cfg = cfg;
- il->pci_dev = pdev;
- il->inta_mask = CSR_INI_SET_MASK;
-
- if (il_alloc_traffic_mem(il))
- IL_ERR("Not enough memory to generate traffic log\n");
-
- /**************************
- * 2. Initializing PCI bus
- **************************/
- pci_disable_link_state(pdev, PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
- PCIE_LINK_STATE_CLKPM);
-
- if (pci_enable_device(pdev)) {
- err = -ENODEV;
- goto out_ieee80211_free_hw;
- }
-
- pci_set_master(pdev);
-
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(36));
- if (err) {
- err = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
- if (!err)
- err = pci_set_consistent_dma_mask(pdev,
- DMA_BIT_MASK(32));
- /* both attempts failed: */
- if (err) {
- IL_WARN("No suitable DMA available.\n");
- goto out_pci_disable_device;
- }
- }
-
- err = pci_request_regions(pdev, DRV_NAME);
- if (err)
- goto out_pci_disable_device;
-
- pci_set_drvdata(pdev, il);
-
-
- /***********************
- * 3. Read REV register
- ***********************/
- il->hw_base = pci_iomap(pdev, 0, 0);
- if (!il->hw_base) {
- err = -ENODEV;
- goto out_pci_release_regions;
- }
-
- D_INFO("pci_resource_len = 0x%08llx\n",
- (unsigned long long) pci_resource_len(pdev, 0));
- D_INFO("pci_resource_base = %p\n", il->hw_base);
-
- /* these spin locks will be used in apm_ops.init and EEPROM access
- * we should init now
- */
- spin_lock_init(&il->reg_lock);
- spin_lock_init(&il->lock);
-
- /*
- * stop and reset the on-board processor just in case it is in a
- * strange state ... like being left stranded by a primary kernel
- * and this is now the kdump kernel trying to start up
- */
- _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);
-
- il4965_hw_detect(il);
- IL_INFO("Detected %s, REV=0x%X\n",
- il->cfg->name, il->hw_rev);
-
- /* We disable the RETRY_TIMEOUT register (0x41) to keep
- * PCI Tx retries from interfering with C3 CPU state */
- pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);
-
- il4965_prepare_card_hw(il);
- if (!il->hw_ready) {
- IL_WARN("Failed, HW not ready\n");
- goto out_iounmap;
- }
-
- /*****************
- * 4. Read EEPROM
- *****************/
- /* Read the EEPROM */
- err = il_eeprom_init(il);
- if (err) {
- IL_ERR("Unable to init EEPROM\n");
- goto out_iounmap;
- }
- err = il4965_eeprom_check_version(il);
- if (err)
- goto out_free_eeprom;
-
- if (err)
- goto out_free_eeprom;
-
- /* extract MAC Address */
- il4965_eeprom_get_mac(il, il->addresses[0].addr);
- D_INFO("MAC address: %pM\n", il->addresses[0].addr);
- il->hw->wiphy->addresses = il->addresses;
- il->hw->wiphy->n_addresses = 1;
-
- /************************
- * 5. Setup HW constants
- ************************/
- if (il4965_set_hw_params(il)) {
- IL_ERR("failed to set hw parameters\n");
- goto out_free_eeprom;
- }
-
- /*******************
- * 6. Setup il
- *******************/
-
- err = il4965_init_drv(il);
- if (err)
- goto out_free_eeprom;
- /* At this point both hw and il are initialized. */
-
- /********************
- * 7. Setup services
- ********************/
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
-
- pci_enable_msi(il->pci_dev);
-
- err = request_irq(il->pci_dev->irq, il_isr,
- IRQF_SHARED, DRV_NAME, il);
- if (err) {
- IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
- goto out_disable_msi;
- }
-
- il4965_setup_deferred_work(il);
- il4965_setup_rx_handlers(il);
-
- /*********************************************
- * 8. Enable interrupts and read RFKILL state
- *********************************************/
-
- /* enable rfkill interrupt: hw bug w/a */
- pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
- if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
- pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
- pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
- }
-
- il_enable_rfkill_int(il);
-
- /* If platform's RF_KILL switch is NOT set to KILL */
- if (_il_rd(il, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
- clear_bit(STATUS_RF_KILL_HW, &il->status);
- else
- set_bit(STATUS_RF_KILL_HW, &il->status);
-
- wiphy_rfkill_set_hw_state(il->hw->wiphy,
- test_bit(STATUS_RF_KILL_HW, &il->status));
-
- il_power_initialize(il);
-
- init_completion(&il->_4965.firmware_loading_complete);
-
- err = il4965_request_firmware(il, true);
- if (err)
- goto out_destroy_workqueue;
-
- return 0;
-
- out_destroy_workqueue:
- destroy_workqueue(il->workqueue);
- il->workqueue = NULL;
- free_irq(il->pci_dev->irq, il);
- out_disable_msi:
- pci_disable_msi(il->pci_dev);
- il4965_uninit_drv(il);
- out_free_eeprom:
- il_eeprom_free(il);
- out_iounmap:
- pci_iounmap(pdev, il->hw_base);
- out_pci_release_regions:
- pci_set_drvdata(pdev, NULL);
- pci_release_regions(pdev);
- out_pci_disable_device:
- pci_disable_device(pdev);
- out_ieee80211_free_hw:
- il_free_traffic_mem(il);
- ieee80211_free_hw(il->hw);
- out:
- return err;
-}
-
-static void __devexit il4965_pci_remove(struct pci_dev *pdev)
-{
- struct il_priv *il = pci_get_drvdata(pdev);
- unsigned long flags;
-
- if (!il)
- return;
-
- wait_for_completion(&il->_4965.firmware_loading_complete);
-
- D_INFO("*** UNLOAD DRIVER ***\n");
-
- il_dbgfs_unregister(il);
- sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);
-
- /* ieee80211_unregister_hw call wil cause il_mac_stop to
- * to be called and il4965_down since we are removing the device
- * we need to set STATUS_EXIT_PENDING bit.
- */
- set_bit(STATUS_EXIT_PENDING, &il->status);
-
- il_leds_exit(il);
-
- if (il->mac80211_registered) {
- ieee80211_unregister_hw(il->hw);
- il->mac80211_registered = 0;
- } else {
- il4965_down(il);
- }
-
- /*
- * Make sure device is reset to low power before unloading driver.
- * This may be redundant with il4965_down(), but there are paths to
- * run il4965_down() without calling apm_ops.stop(), and there are
- * paths to avoid running il4965_down() at all before leaving driver.
- * This (inexpensive) call *makes sure* device is reset.
- */
- il_apm_stop(il);
-
- /* make sure we flush any pending irq or
- * tasklet for the driver
- */
- spin_lock_irqsave(&il->lock, flags);
- il_disable_interrupts(il);
- spin_unlock_irqrestore(&il->lock, flags);
-
- il4965_synchronize_irq(il);
-
- il4965_dealloc_ucode_pci(il);
-
- if (il->rxq.bd)
- il4965_rx_queue_free(il, &il->rxq);
- il4965_hw_txq_ctx_free(il);
-
- il_eeprom_free(il);
-
-
- /*netif_stop_queue(dev); */
- flush_workqueue(il->workqueue);
-
- /* ieee80211_unregister_hw calls il_mac_stop, which flushes
- * il->workqueue... so we can't take down the workqueue
- * until now... */
- destroy_workqueue(il->workqueue);
- il->workqueue = NULL;
- il_free_traffic_mem(il);
-
- free_irq(il->pci_dev->irq, il);
- pci_disable_msi(il->pci_dev);
- pci_iounmap(pdev, il->hw_base);
- pci_release_regions(pdev);
- pci_disable_device(pdev);
- pci_set_drvdata(pdev, NULL);
-
- il4965_uninit_drv(il);
-
- dev_kfree_skb(il->beacon_skb);
-
- ieee80211_free_hw(il->hw);
-}
-
-/*
- * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
- * must be called under il->lock and mac access
- */
-void il4965_txq_set_sched(struct il_priv *il, u32 mask)
-{
- il_wr_prph(il, IL49_SCD_TXFACT, mask);
-}
-
-/*****************************************************************************
- *
- * driver and module entry point
- *
- *****************************************************************************/
-
-/* Hardware specific file defines the PCI IDs table for that hardware module */
-static DEFINE_PCI_DEVICE_TABLE(il4965_hw_card_ids) = {
- {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
- {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
- {0}
-};
-MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);
-
-static struct pci_driver il4965_driver = {
- .name = DRV_NAME,
- .id_table = il4965_hw_card_ids,
- .probe = il4965_pci_probe,
- .remove = __devexit_p(il4965_pci_remove),
- .driver.pm = IL_LEGACY_PM_OPS,
-};
-
-static int __init il4965_init(void)
-{
-
- int ret;
- pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
- pr_info(DRV_COPYRIGHT "\n");
-
- ret = il4965_rate_control_register();
- if (ret) {
- pr_err("Unable to register rate control algorithm: %d\n", ret);
- return ret;
- }
-
- ret = pci_register_driver(&il4965_driver);
- if (ret) {
- pr_err("Unable to initialize PCI module\n");
- goto error_register;
- }
-
- return ret;
-
-error_register:
- il4965_rate_control_unregister();
- return ret;
-}
-
-static void __exit il4965_exit(void)
-{
- pci_unregister_driver(&il4965_driver);
- il4965_rate_control_unregister();
-}
-
-module_exit(il4965_exit);
-module_init(il4965_init);
-
-#ifdef CONFIG_IWLEGACY_DEBUG
-module_param_named(debug, il_debug_level, uint, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(debug, "debug output mask");
-#endif
-
-module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, S_IRUGO);
-MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
-module_param_named(queues_num, il4965_mod_params.num_of_queues, int, S_IRUGO);
-MODULE_PARM_DESC(queues_num, "number of hw queues.");
-module_param_named(11n_disable, il4965_mod_params.disable_11n, int, S_IRUGO);
-MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
-module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K,
- int, S_IRUGO);
-MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size");
-module_param_named(fw_restart, il4965_mod_params.restart_fw, int, S_IRUGO);
-MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");
projects / cascardo / linux.git / commitdiff