greybus: gpbridge.h: whitespace cleanups

Replace #define<TAB> with #define<SPACE>.

Also move the #ifdef block to below the initial comment block, like
other .h files are.

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>

diff --git a/drivers/staging/greybus/gpbridge.h b/drivers/staging/greybus/gpbridge.h
index 8888238..44a7091 100644 (file)
--- a/drivers/staging/greybus/gpbridge.h
+++ b/drivers/staging/greybus/gpbridge.h
@@ -1,5 +1,3 @@
-#ifndef __GB_GPBRIDGE_H__
-#define __GB_GPBRIDGE_H__
 /*
  * This file is provided under a dual BSD/GPLv2 license.  When using or
  * redistributing this file, you may do so under either license.
@@ -51,24 +49,26 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
+#ifndef __GB_GPBRIDGE_H__
+#define __GB_GPBRIDGE_H__
 
 /* I2C */
 
 /* Version of the Greybus i2c protocol we support */
-#define        GB_I2C_VERSION_MAJOR            0x00
-#define        GB_I2C_VERSION_MINOR            0x01
+#define GB_I2C_VERSION_MAJOR           0x00
+#define GB_I2C_VERSION_MINOR           0x01
 
 /* Greybus i2c request types */
-#define        GB_I2C_TYPE_INVALID             0x00
-#define        GB_I2C_TYPE_PROTOCOL_VERSION    0x01
-#define        GB_I2C_TYPE_FUNCTIONALITY       0x02
-#define        GB_I2C_TYPE_TIMEOUT             0x03
-#define        GB_I2C_TYPE_RETRIES             0x04
-#define        GB_I2C_TYPE_TRANSFER            0x05
-#define        GB_I2C_TYPE_RESPONSE            0x80    /* OR'd with rest */
+#define GB_I2C_TYPE_INVALID            0x00
+#define GB_I2C_TYPE_PROTOCOL_VERSION   0x01
+#define GB_I2C_TYPE_FUNCTIONALITY      0x02
+#define GB_I2C_TYPE_TIMEOUT            0x03
+#define GB_I2C_TYPE_RETRIES            0x04
+#define GB_I2C_TYPE_TRANSFER           0x05
+#define GB_I2C_TYPE_RESPONSE           0x80    /* OR'd with rest */
 
-#define        GB_I2C_RETRIES_DEFAULT          3
-#define        GB_I2C_TIMEOUT_DEFAULT          1000    /* milliseconds */
+#define GB_I2C_RETRIES_DEFAULT         3
+#define GB_I2C_TIMEOUT_DEFAULT         1000    /* milliseconds */
 
 /* functionality request has no payload */
 struct gb_i2c_functionality_response {
@@ -113,29 +113,29 @@ struct gb_i2c_transfer_response {
 /* GPIO */
 
 /* Version of the Greybus GPIO protocol we support */
-#define        GB_GPIO_VERSION_MAJOR           0x00
-#define        GB_GPIO_VERSION_MINOR           0x01
+#define GB_GPIO_VERSION_MAJOR          0x00
+#define GB_GPIO_VERSION_MINOR          0x01
 
 /* Greybus GPIO request types */
-#define        GB_GPIO_TYPE_INVALID            0x00
-#define        GB_GPIO_TYPE_PROTOCOL_VERSION   0x01
-#define        GB_GPIO_TYPE_LINE_COUNT         0x02
-#define        GB_GPIO_TYPE_ACTIVATE           0x03
-#define        GB_GPIO_TYPE_DEACTIVATE         0x04
-#define        GB_GPIO_TYPE_GET_DIRECTION      0x05
-#define        GB_GPIO_TYPE_DIRECTION_IN       0x06
-#define        GB_GPIO_TYPE_DIRECTION_OUT      0x07
-#define        GB_GPIO_TYPE_GET_VALUE          0x08
-#define        GB_GPIO_TYPE_SET_VALUE          0x09
-#define        GB_GPIO_TYPE_SET_DEBOUNCE       0x0a
+#define GB_GPIO_TYPE_INVALID           0x00
+#define GB_GPIO_TYPE_PROTOCOL_VERSION  0x01
+#define GB_GPIO_TYPE_LINE_COUNT                0x02
+#define GB_GPIO_TYPE_ACTIVATE          0x03
+#define GB_GPIO_TYPE_DEACTIVATE                0x04
+#define GB_GPIO_TYPE_GET_DIRECTION     0x05
+#define GB_GPIO_TYPE_DIRECTION_IN      0x06
+#define GB_GPIO_TYPE_DIRECTION_OUT     0x07
+#define GB_GPIO_TYPE_GET_VALUE         0x08
+#define GB_GPIO_TYPE_SET_VALUE         0x09
+#define GB_GPIO_TYPE_SET_DEBOUNCE      0x0a
 #define GB_GPIO_TYPE_IRQ_TYPE          0x0b
 #define GB_GPIO_TYPE_IRQ_ACK           0x0c
 #define GB_GPIO_TYPE_IRQ_MASK          0x0d
 #define GB_GPIO_TYPE_IRQ_UNMASK                0x0e
 #define GB_GPIO_TYPE_IRQ_EVENT         0x0f
-#define        GB_GPIO_TYPE_RESPONSE           0x80    /* OR'd with rest */
+#define GB_GPIO_TYPE_RESPONSE          0x80    /* OR'd with rest */
 
-#define        GB_GPIO_DEBOUNCE_USEC_DEFAULT   0       /* microseconds */
+#define GB_GPIO_DEBOUNCE_USEC_DEFAULT  0       /* microseconds */
 
 /* line count request has no payload */
 struct gb_gpio_line_count_response {
@@ -220,20 +220,20 @@ struct gb_gpio_irq_event_request {
 /* PWM */
 
 /* Version of the Greybus PWM protocol we support */
-#define        GB_PWM_VERSION_MAJOR            0x00
-#define        GB_PWM_VERSION_MINOR            0x01
+#define GB_PWM_VERSION_MAJOR           0x00
+#define GB_PWM_VERSION_MINOR           0x01
 
 /* Greybus PWM request types */
-#define        GB_PWM_TYPE_INVALID             0x00
-#define        GB_PWM_TYPE_PROTOCOL_VERSION    0x01
-#define        GB_PWM_TYPE_PWM_COUNT           0x02
-#define        GB_PWM_TYPE_ACTIVATE            0x03
-#define        GB_PWM_TYPE_DEACTIVATE          0x04
-#define        GB_PWM_TYPE_CONFIG              0x05
-#define        GB_PWM_TYPE_POLARITY            0x06
-#define        GB_PWM_TYPE_ENABLE              0x07
-#define        GB_PWM_TYPE_DISABLE             0x08
-#define        GB_PWM_TYPE_RESPONSE            0x80    /* OR'd with rest */
+#define GB_PWM_TYPE_INVALID            0x00
+#define GB_PWM_TYPE_PROTOCOL_VERSION   0x01
+#define GB_PWM_TYPE_PWM_COUNT          0x02
+#define GB_PWM_TYPE_ACTIVATE           0x03
+#define GB_PWM_TYPE_DEACTIVATE         0x04
+#define GB_PWM_TYPE_CONFIG             0x05
+#define GB_PWM_TYPE_POLARITY           0x06
+#define GB_PWM_TYPE_ENABLE             0x07
+#define GB_PWM_TYPE_DISABLE            0x08
+#define GB_PWM_TYPE_RESPONSE           0x80    /* OR'd with rest */
 
 /* pwm count request has no payload */
 struct gb_pwm_count_response {