thermal: Add support for the thermal sensor on Kirkwood SoCs
authorNobuhiro Iwamatsu <iwamatsu@nigauri.org>
Wed, 6 Feb 2013 06:35:24 +0000 (06:35 +0000)
committerZhang Rui <rui.zhang@intel.com>
Fri, 8 Feb 2013 12:25:56 +0000 (20:25 +0800)
This patch adds support for Kirkwood 88F6282 and 88F6283 thermal sensor.

Signed-off-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt [new file with mode: 0644]
drivers/thermal/Kconfig
drivers/thermal/Makefile
drivers/thermal/kirkwood_thermal.c [new file with mode: 0644]

diff --git a/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt b/Documentation/devicetree/bindings/thermal/kirkwood-thermal.txt
new file mode 100644 (file)
index 0000000..8c0f5eb
--- /dev/null
@@ -0,0 +1,15 @@
+* Kirkwood Thermal
+
+This version is for Kirkwood 88F8262 & 88F6283 SoCs. Other kirkwoods
+don't contain a thermal sensor.
+
+Required properties:
+- compatible : "marvell,kirkwood-thermal"
+- reg : Address range of the thermal registers
+
+Example:
+
+       thermal@10078 {
+               compatible = "marvell,kirkwood-thermal";
+               reg = <0x10078 0x4>;
+       };
index e4cf7fb..5070fbe 100644 (file)
@@ -101,6 +101,14 @@ config RCAR_THERMAL
          Enable this to plug the R-Car thermal sensor driver into the Linux
          thermal framework
 
+config KIRKWOOD_THERMAL
+       tristate "Temperature sensor on Marvell Kirkwood SoCs"
+       depends on ARCH_KIRKWOOD
+       depends on OF
+       help
+         Support for the Kirkwood thermal sensor driver into the Linux thermal
+         framework. Only kirkwood 88F6282 and 88F6283 have this sensor.
+
 config EXYNOS_THERMAL
        tristate "Temperature sensor on Samsung EXYNOS"
        depends on (ARCH_EXYNOS4 || ARCH_EXYNOS5)
index 574f5f5..b32c35d 100644 (file)
@@ -15,6 +15,7 @@ obj-$(CONFIG_CPU_THERMAL)     += cpu_cooling.o
 # platform thermal drivers
 obj-$(CONFIG_SPEAR_THERMAL)    += spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)     += rcar_thermal.o
+obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-$(CONFIG_EXYNOS_THERMAL)   += exynos_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)   += db8500_thermal.o
 obj-$(CONFIG_DB8500_CPUFREQ_COOLING)   += db8500_cpufreq_cooling.o
diff --git a/drivers/thermal/kirkwood_thermal.c b/drivers/thermal/kirkwood_thermal.c
new file mode 100644 (file)
index 0000000..65cb4f0
--- /dev/null
@@ -0,0 +1,134 @@
+/*
+ * Kirkwood thermal sensor driver
+ *
+ * Copyright (C) 2012 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+#define KIRKWOOD_THERMAL_VALID_OFFSET  9
+#define KIRKWOOD_THERMAL_VALID_MASK    0x1
+#define KIRKWOOD_THERMAL_TEMP_OFFSET   10
+#define KIRKWOOD_THERMAL_TEMP_MASK     0x1FF
+
+/* Kirkwood Thermal Sensor Dev Structure */
+struct kirkwood_thermal_priv {
+       void __iomem *sensor;
+};
+
+static int kirkwood_get_temp(struct thermal_zone_device *thermal,
+                         unsigned long *temp)
+{
+       unsigned long reg;
+       struct kirkwood_thermal_priv *priv = thermal->devdata;
+
+       reg = readl_relaxed(priv->sensor);
+
+       /* Valid check */
+       if (!(reg >> KIRKWOOD_THERMAL_VALID_OFFSET) &
+           KIRKWOOD_THERMAL_VALID_MASK) {
+               dev_err(&thermal->device,
+                       "Temperature sensor reading not valid\n");
+               return -EIO;
+       }
+
+       /*
+        * Calculate temperature. See Section 8.10.1 of the 88AP510,
+        * datasheet, which has the same sensor.
+        * Documentation/arm/Marvell/README
+        */
+       reg = (reg >> KIRKWOOD_THERMAL_TEMP_OFFSET) &
+               KIRKWOOD_THERMAL_TEMP_MASK;
+       *temp = ((2281638UL - (7298*reg)) / 10);
+
+       return 0;
+}
+
+static struct thermal_zone_device_ops ops = {
+       .get_temp = kirkwood_get_temp,
+};
+
+static const struct of_device_id kirkwood_thermal_id_table[] = {
+       { .compatible = "marvell,kirkwood-thermal" },
+       {}
+};
+
+static int kirkwood_thermal_probe(struct platform_device *pdev)
+{
+       struct thermal_zone_device *thermal = NULL;
+       struct kirkwood_thermal_priv *priv;
+       struct resource *res;
+
+       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+       if (!res) {
+               dev_err(&pdev->dev, "Failed to get platform resource\n");
+               return -ENODEV;
+       }
+
+       priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+       if (!priv)
+               return -ENOMEM;
+
+       priv->sensor = devm_request_and_ioremap(&pdev->dev, res);
+       if (!priv->sensor) {
+               dev_err(&pdev->dev, "Failed to request_ioremap memory\n");
+               return -EADDRNOTAVAIL;
+       }
+
+       thermal = thermal_zone_device_register("kirkwood_thermal", 0, 0,
+                                              priv, &ops, NULL, 0, 0);
+       if (IS_ERR(thermal)) {
+               dev_err(&pdev->dev,
+                       "Failed to register thermal zone device\n");
+               return PTR_ERR(thermal);
+       }
+
+       platform_set_drvdata(pdev, thermal);
+
+       return 0;
+}
+
+static int kirkwood_thermal_exit(struct platform_device *pdev)
+{
+       struct thermal_zone_device *kirkwood_thermal =
+               platform_get_drvdata(pdev);
+
+       thermal_zone_device_unregister(kirkwood_thermal);
+       platform_set_drvdata(pdev, NULL);
+
+       return 0;
+}
+
+MODULE_DEVICE_TABLE(of, kirkwood_thermal_id_table);
+
+static struct platform_driver kirkwood_thermal_driver = {
+       .probe = kirkwood_thermal_probe,
+       .remove = kirkwood_thermal_exit,
+       .driver = {
+               .name = "kirkwood_thermal",
+               .owner = THIS_MODULE,
+               .of_match_table = of_match_ptr(kirkwood_thermal_id_table),
+       },
+};
+
+module_platform_driver(kirkwood_thermal_driver);
+
+MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu@nigauri.org>");
+MODULE_DESCRIPTION("kirkwood thermal driver");
+MODULE_LICENSE("GPL");