[media] radio: Add Sanyo LM7000 tuner driver
authorOndrej Zary <linux@rainbow-software.org>
Wed, 13 Jun 2012 20:25:32 +0000 (17:25 -0300)
committerMauro Carvalho Chehab <mchehab@redhat.com>
Mon, 25 Jun 2012 14:07:27 +0000 (11:07 -0300)
Add very simple driver for Sanyo LM7000 AM/FM tuner chip. Only FM is supported
as there is no known HW with AM implemented.

This will be used by radio-aimslab and radio-sf16fmi.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
drivers/media/radio/lm7000.h [new file with mode: 0644]

diff --git a/drivers/media/radio/lm7000.h b/drivers/media/radio/lm7000.h
new file mode 100644 (file)
index 0000000..139cd6b
--- /dev/null
@@ -0,0 +1,43 @@
+#ifndef __LM7000_H
+#define __LM7000_H
+
+/* Sanyo LM7000 tuner chip control
+ *
+ * Copyright 2012 Ondrej Zary <linux@rainbow-software.org>
+ * based on radio-aimslab.c by M. Kirkwood
+ * and radio-sf16fmi.c by M. Kirkwood and Petr Vandrovec
+ */
+
+#define LM7000_DATA    (1 << 0)
+#define LM7000_CLK     (1 << 1)
+#define LM7000_CE      (1 << 2)
+
+#define LM7000_FM_100  (0 << 20)
+#define LM7000_FM_50   (1 << 20)
+#define LM7000_FM_25   (2 << 20)
+#define LM7000_BIT_FM  (1 << 23)
+
+static inline void lm7000_set_freq(u32 freq, void *handle,
+                               void (*set_pins)(void *handle, u8 pins))
+{
+       int i;
+       u8 data;
+       u32 val;
+
+       freq += 171200;         /* Add 10.7 MHz IF */
+       freq /= 400;            /* Convert to 25 kHz units */
+       val = freq | LM7000_FM_25 | LM7000_BIT_FM;
+       /* write the 24-bit register, starting with LSB */
+       for (i = 0; i < 24; i++) {
+               data = val & (1 << i) ? LM7000_DATA : 0;
+               set_pins(handle, data | LM7000_CE);
+               udelay(2);
+               set_pins(handle, data | LM7000_CE | LM7000_CLK);
+               udelay(2);
+               set_pins(handle, data | LM7000_CE);
+               udelay(2);
+       }
+       set_pins(handle, 0);
+}
+
+#endif /* __LM7000_H */