F: Documentation/rpmsg.txt
F: include/linux/rpmsg.h
+RESET CONTROLLER FRAMEWORK
+M: Philipp Zabel <p.zabel@pengutronix.de>
+S: Maintained
+F: drivers/reset/
+F: Documentation/devicetree/bindings/reset/
+F: include/linux/reset.h
+F: include/linux/reset-controller.h
+
RFKILL
M: Johannes Berg <johannes@sipsolutions.net>
L: linux-wireless@vger.kernel.org
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
+ reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
pcie@3,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
+ reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
pcie@4,0 {
device_type = "pci";
assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
- reg = <0x1000 0 0 0 0>;
+ reg = <0x2000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
trigger@3 {
reg = <3>;
trigger-name = "external";
- trigger-value = <0x13>;
+ trigger-value = <0xd>;
trigger-external;
};
};
status = "okay";
ak8975@0c {
- compatible = "ak,ak8975";
+ compatible = "asahi-kasei,ak8975";
reg = <0x0c>;
gpios = <&gpj0 7 0>;
};
regulator-name = "VDD_IOPERI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+ regulator-always-on;
op_mode = <1>;
};
gpio-key,wakeup;
};
};
-
- amba {
- mdma1: mdma@11C10000 {
- /*
- * MDMA1 can support both secure and non-secure
- * AXI transactions. When this is enabled in the kernel
- * for boards that run in secure mode, we are getting
- * imprecise external aborts causing the kernel to oops.
- */
- status = "disabled";
- };
- };
};
reg = <0x100440C0 0x20>;
};
- mau_pd: power-domain@100440E0 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x100440E0 0x20>;
- };
-
- g2d_pd: power-domain@10044100 {
- compatible = "samsung,exynos4210-pd";
- reg = <0x10044100 0x20>;
- };
-
msc_pd: power-domain@10044120 {
compatible = "samsung,exynos4210-pd";
reg = <0x10044120 0x20>;
#dma-cells = <1>;
#dma-channels = <8>;
#dma-requests = <1>;
+ /*
+ * MDMA1 can support both secure and non-secure
+ * AXI transactions. When this is enabled in the kernel
+ * for boards that run in secure mode, we are getting
+ * imprecise external aborts causing the kernel to oops.
+ */
+ status = "disabled";
};
};
spi_0: spi@12d20000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d20000 0x100>;
- interrupts = <0 66 0>;
+ interrupts = <0 68 0>;
dmas = <&pdma0 5
&pdma0 4>;
dma-names = "tx", "rx";
spi_1: spi@12d30000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d30000 0x100>;
- interrupts = <0 67 0>;
+ interrupts = <0 69 0>;
dmas = <&pdma1 5
&pdma1 4>;
dma-names = "tx", "rx";
spi_2: spi@12d40000 {
compatible = "samsung,exynos4210-spi";
reg = <0x12d40000 0x100>;
- interrupts = <0 68 0>;
+ interrupts = <0 70 0>;
dmas = <&pdma0 7
&pdma0 6>;
dma-names = "tx", "rx";
interrupts = <0 112 0>;
clocks = <&clock 471>;
clock-names = "secss";
- samsung,power-domain = <&g2d_pd>;
};
};
CONFIG_I2C=y
CONFIG_I2C_MUX=y
CONFIG_I2C_ARB_GPIO_CHALLENGE=y
+CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_S3C2410=y
CONFIG_DEBUG_GPIO=y
# CONFIG_HWMON is not set
*/
pr_err("No support for Trusted Foundations, continuing in degraded mode.\n");
pr_err("Secondary processors as well as CPU PM will be disabled.\n");
+#if IS_ENABLED(CONFIG_SMP)
setup_max_cpus = 0;
+#endif
cpu_idle_poll_ctrl(true);
}
static struct at91_adc_trigger at91_adc_triggers[] = {
[0] = {
.name = "timer-counter-0",
- .value = AT91_ADC_TRGSEL_TC0 | AT91_ADC_TRGEN,
+ .value = 0x1,
},
[1] = {
.name = "timer-counter-1",
- .value = AT91_ADC_TRGSEL_TC1 | AT91_ADC_TRGEN,
+ .value = 0x3,
},
[2] = {
.name = "timer-counter-2",
- .value = AT91_ADC_TRGSEL_TC2 | AT91_ADC_TRGEN,
+ .value = 0x5,
},
[3] = {
.name = "external",
- .value = AT91_ADC_TRGSEL_EXTERNAL | AT91_ADC_TRGEN,
+ .value = 0xd,
.is_external = true,
},
};
#include <mach/map.h>
+#include <plat/cpu.h>
+
#include "smc.h"
static int exynos_do_idle(void)
static int exynos_cpu_boot(int cpu)
{
+ /*
+ * The second parameter of SMC_CMD_CPU1BOOT command means CPU id.
+ * But, Exynos4212 has only one secondary CPU so second parameter
+ * isn't used for informing secure firmware about CPU id.
+ */
+ if (soc_is_exynos4212())
+ cpu = 0;
+
exynos_smc(SMC_CMD_CPU1BOOT, cpu, 0, 0);
return 0;
}
static int exynos_set_cpu_boot_addr(int cpu, unsigned long boot_addr)
{
- void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c + 4*cpu;
+ void __iomem *boot_reg = S5P_VA_SYSRAM_NS + 0x1c;
+
+ if (!soc_is_exynos4212())
+ boot_reg += 4*cpu;
__raw_writel(boot_addr, boot_reg);
return 0;
pdev = platform_device_alloc("mx3-camera", 0);
if (!pdev)
- goto err;
+ return ERR_PTR(-ENOMEM);
pdev->dev.dma_mask = kmalloc(sizeof(*pdev->dev.dma_mask), GFP_KERNEL);
if (!pdev->dev.dma_mask)
iounmap(pci_base);
res_ioremap:
- clk_disable_unprepare(clk);
+ /*
+ * If the PCIe unit is actually enabled and we have PCI
+ * support in the kernel, we intentionally do not release the
+ * reference to the clock. We want to keep it running since
+ * the bootloader does some PCIe link configuration that the
+ * kernel is for now unable to do, and gating the clock would
+ * make us loose this precious configuration.
+ */
+ if (!of_device_is_available(child) || !IS_ENABLED(CONFIG_PCI_MVEBU)) {
+ clk_disable_unprepare(clk);
+ clk_put(clk);
+ }
clk_err:
of_node_put(child);
board_nand_data.nr_parts = nr_parts;
board_nand_data.devsize = nand_type;
- board_nand_data.ecc_opt = OMAP_ECC_BCH8_CODE_HW;
+ board_nand_data.ecc_opt = OMAP_ECC_HAM1_CODE_HW;
gpmc_nand_init(&board_nand_data, gpmc_t);
}
#endif /* CONFIG_MTD_NAND_OMAP2 || CONFIG_MTD_NAND_OMAP2_MODULE */
.clkdm_name = "dpll4_clkdm",
};
-DEFINE_STRUCT_CLK(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names, dpll4_m5x2_ck_ops);
+DEFINE_STRUCT_CLK_FLAGS(dpll4_m5x2_ck, dpll4_m5x2_ck_parent_names,
+ dpll4_m5x2_ck_ops, CLK_SET_RATE_PARENT);
static struct clk dpll4_m5x2_ck_3630 = {
.name = "dpll4_m5x2_ck",
#include <linux/cpuidle.h>
#include <linux/cpu_pm.h>
#include <linux/export.h>
+#include <linux/clockchips.h>
#include <asm/cpuidle.h>
#include <asm/proc-fns.h>
{
struct idle_statedata *cx = state_ptr + index;
u32 mpuss_can_lose_context = 0;
+ int cpu_id = smp_processor_id();
/*
* CPU0 has to wait and stay ON until CPU1 is OFF state.
mpuss_can_lose_context = (cx->mpu_state == PWRDM_POWER_RET) &&
(cx->mpu_logic_state == PWRDM_POWER_OFF);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu_id);
+
/*
* Call idle CPU PM enter notifier chain so that
* VFP and per CPU interrupt context is saved.
if (dev->cpu == 0 && mpuss_can_lose_context)
cpu_cluster_pm_exit();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu_id);
+
fail:
cpuidle_coupled_parallel_barrier(dev, &abort_barrier);
cpu_done[dev->cpu] = false;
return index;
}
+/*
+ * For each cpu, setup the broadcast timer because local timers
+ * stops for the states above C1.
+ */
+static void omap_setup_broadcast_timer(void *arg)
+{
+ int cpu = smp_processor_id();
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ON, &cpu);
+}
+
static struct cpuidle_driver omap4_idle_driver = {
.name = "omap4_idle",
.owner = THIS_MODULE,
/* C2 - CPU0 OFF + CPU1 OFF + MPU CSWR */
.exit_latency = 328 + 440,
.target_residency = 960,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C2",
.desc = "CPUx OFF, MPUSS CSWR",
/* C3 - CPU0 OFF + CPU1 OFF + MPU OSWR */
.exit_latency = 460 + 518,
.target_residency = 1100,
- .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED |
- CPUIDLE_FLAG_TIMER_STOP,
+ .flags = CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_COUPLED,
.enter = omap_enter_idle_coupled,
.name = "C3",
.desc = "CPUx OFF, MPUSS OSWR",
if (!cpu_clkdm[0] || !cpu_clkdm[1])
return -ENODEV;
+ /* Configure the broadcast timer on each cpu */
+ on_each_cpu(omap_setup_broadcast_timer, NULL, 1);
+
return cpuidle_register(&omap4_idle_driver, cpu_online_mask);
}
* current exception.
*/
- .flags = HWMOD_EXT_OPT_MAIN_CLK,
+ .flags = HWMOD_EXT_OPT_MAIN_CLK | HWMOD_SWSUP_SIDLE,
.main_clk = "pad_clks_ck",
.prcm = {
.omap4 = {
static struct omap_dma_global_context_registers {
u32 dma_irqenable_l0;
+ u32 dma_irqenable_l1;
u32 dma_ocp_sysconfig;
u32 dma_gcr;
} omap_dma_global_context;
/*----------------------------------------------------------------------------*/
+/*
+ * Note that we are currently using only IRQENABLE_L0 and L1.
+ * As the DSP may be using IRQENABLE_L2 and L3, let's not
+ * touch those for now.
+ */
void omap_dma_global_context_save(void)
{
omap_dma_global_context.dma_irqenable_l0 =
p->dma_read(IRQENABLE_L0, 0);
+ omap_dma_global_context.dma_irqenable_l1 =
+ p->dma_read(IRQENABLE_L1, 0);
omap_dma_global_context.dma_ocp_sysconfig =
p->dma_read(OCP_SYSCONFIG, 0);
omap_dma_global_context.dma_gcr = p->dma_read(GCR, 0);
OCP_SYSCONFIG, 0);
p->dma_write(omap_dma_global_context.dma_irqenable_l0,
IRQENABLE_L0, 0);
+ p->dma_write(omap_dma_global_context.dma_irqenable_l1,
+ IRQENABLE_L1, 0);
if (IS_DMA_ERRATA(DMA_ROMCODE_BUG))
p->dma_write(0x3 , IRQSTATUS_L0, 0);
projects / cascardo / linux.git / commitdiff