clocksource/drivers/integrator-ap: Convert init function to return error

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>

diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c
index 3f59ac2..675face 100644 (file)
--- a/drivers/clocksource/timer-integrator-ap.c
+++ b/drivers/clocksource/timer-integrator-ap.c
@@ -36,11 +36,12 @@ static u64 notrace integrator_read_sched_clock(void)
        return -readl(sched_clk_base + TIMER_VALUE);
 }
 
-static void integrator_clocksource_init(unsigned long inrate,
-                                       void __iomem *base)
+static int integrator_clocksource_init(unsigned long inrate,
+                                      void __iomem *base)
 {
        u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
        unsigned long rate = inrate;
+       int ret;
 
        if (rate >= 1500000) {
                rate /= 16;
@@ -50,11 +51,15 @@ static void integrator_clocksource_init(unsigned long inrate,
        writel(0xffff, base + TIMER_LOAD);
        writel(ctrl, base + TIMER_CTRL);
 
-       clocksource_mmio_init(base + TIMER_VALUE, "timer2",
-                       rate, 200, 16, clocksource_mmio_readl_down);
+       ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+                                   rate, 200, 16, clocksource_mmio_readl_down);
+       if (ret)
+               return ret;
 
        sched_clk_base = base;
        sched_clock_register(integrator_read_sched_clock, 16, rate);
+
+       return 0;
 }
 
 static unsigned long timer_reload;
@@ -138,11 +143,12 @@ static struct irqaction integrator_timer_irq = {
        .dev_id         = &integrator_clockevent,
 };
 
-static void integrator_clockevent_init(unsigned long inrate,
-                               void __iomem *base, int irq)
+static int integrator_clockevent_init(unsigned long inrate,
+                                     void __iomem *base, int irq)
 {
        unsigned long rate = inrate;
        unsigned int ctrl = 0;
+       int ret;
 
        clkevt_base = base;
        /* Calculate and program a divisor */
@@ -156,14 +162,18 @@ static void integrator_clockevent_init(unsigned long inrate,
        timer_reload = rate / HZ;
        writel(ctrl, clkevt_base + TIMER_CTRL);
 
-       setup_irq(irq, &integrator_timer_irq);
+       ret = setup_irq(irq, &integrator_timer_irq);
+       if (ret)
+               return ret;
+
        clockevents_config_and_register(&integrator_clockevent,
                                        rate,
                                        1,
                                        0xffffU);
+       return 0;
 }
 
-static void __init integrator_ap_timer_init_of(struct device_node *node)
+static int __init integrator_ap_timer_init_of(struct device_node *node)
 {
        const char *path;
        void __iomem *base;
@@ -176,12 +186,12 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
        base = of_io_request_and_map(node, 0, "integrator-timer");
        if (IS_ERR(base))
-               return;
+               return PTR_ERR(base);
 
        clk = of_clk_get(node, 0);
        if (IS_ERR(clk)) {
                pr_err("No clock for %s\n", node->name);
-               return;
+               return PTR_ERR(clk);
        }
        clk_prepare_enable(clk);
        rate = clk_get_rate(clk);
@@ -189,31 +199,38 @@ static void __init integrator_ap_timer_init_of(struct device_node *node)
 
        err = of_property_read_string(of_aliases,
                                "arm,timer-primary", &path);
-       if (WARN_ON(err))
-               return;
+       if (err) {
+               pr_warn("Failed to read property");
+               return err;
+       }
+
        pri_node = of_find_node_by_path(path);
+
        err = of_property_read_string(of_aliases,
                                "arm,timer-secondary", &path);
-       if (WARN_ON(err))
-               return;
+       if (err) {
+               pr_warn("Failed to read property");             
+               return err;
+       }
+
+
        sec_node = of_find_node_by_path(path);
 
-       if (node == pri_node) {
+       if (node == pri_node)
                /* The primary timer lacks IRQ, use as clocksource */
-               integrator_clocksource_init(rate, base);
-               return;
-       }
+               return integrator_clocksource_init(rate, base);
 
        if (node == sec_node) {
                /* The secondary timer will drive the clock event */
                irq = irq_of_parse_and_map(node, 0);
-               integrator_clockevent_init(rate, base, irq);
-               return;
+               return integrator_clockevent_init(rate, base, irq);
        }
 
        pr_info("Timer @%p unused\n", base);
        clk_disable_unprepare(clk);
+
+       return 0;
 }
 
-CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
+CLOCKSOURCE_OF_DECLARE_RET(integrator_ap_timer, "arm,integrator-timer",
                       integrator_ap_timer_init_of);