--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd.
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/ {
+ soc {
+ prcmu@80157000 {
+ ab8505 {
+ ab8505-gpio {
+ /* Hog a few default settings */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio2_default_mode>,
+ <&gpio10_default_mode>,
+ <&gpio11_default_mode>,
+ <&gpio13_default_mode>,
+ <&gpio34_default_mode>,
+ <&gpio50_default_mode>,
+ <&pwm_default_mode>,
+ <&adi2_default_mode>,
+ <&modsclsda_default_mode>,
+ <&resethw_default_mode>,
+ <&service_default_mode>;
+
+ /*
+ * Pins 2, 10, 11, 13, 34 and 50
+ * are muxed in as GPIO, and configured as INPUT PULL DOWN
+ */
+ gpio2 {
+ gpio2_default_mode: gpio2_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio2_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO2_R5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio10 {
+ gpio10_default_mode: gpio10_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio10_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO10_B16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio11 {
+ gpio11_default_mode: gpio11_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio11_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO11_B17";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio13 {
+ gpio13_default_mode: gpio13_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio13_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO13_D17";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ gpio34 {
+ gpio34_default_mode: gpio34_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio34_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO34_H14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ gpio50 {
+ gpio50_default_mode: gpio50_default {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio50_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO50_L4";
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
+ /* This sets up the PWM pin 14 */
+ pwm {
+ pwm_default_mode: pwm_default {
+ default_mux {
+ ste,function = "pwmout";
+ ste,pins = "pwmout1_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO14_C16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* This sets up audio interface 2 */
+ adi2 {
+ adi2_default_mode: adi2_default {
+ default_mux {
+ ste,function = "adi2";
+ ste,pins = "adi2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO17_P2",
+ "GPIO18_N3",
+ "GPIO19_T1",
+ "GPIO20_P3";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /* Modem I2C setup (SCL and SDA pins) */
+ modsclsda {
+ modsclsda_default_mode: modsclsda_default {
+ default_mux {
+ ste,function = "modsclsda";
+ ste,pins = "modsclsda_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO40_J15",
+ "GPIO41_J14";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ resethw {
+ resethw_default_mode: resethw_default {
+ default_mux {
+ ste,function = "resethw";
+ ste,pins = "resethw_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO52_D16";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ service {
+ service_default_mode: service_default {
+ default_mux {
+ ste,function = "service";
+ ste,pins = "service_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO53_D15";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ /*
+ * Clock output pins associated with regulators.
+ */
+ sysclkreq2 {
+ sysclkreq2_default_mode: sysclkreq2_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq2_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_N4";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq2_sleep_mode: sysclkreq2_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio1_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO1_N4";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ sysclkreq4 {
+ sysclkreq4_default_mode: sysclkreq4_default {
+ default_mux {
+ ste,function = "sysclkreq";
+ ste,pins = "sysclkreq4_d_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_P5";
+ input-enable;
+ bias-disable;
+ };
+ };
+ sysclkreq4_sleep_mode: sysclkreq4_sleep {
+ default_mux {
+ ste,function = "gpio";
+ ste,pins = "gpio3_a_1";
+ };
+ default_cfg {
+ ste,pins = "GPIO3_P5";
+ input-enable;
+ bias-pull-down;
+ };
+ };
+ };
+ };
+ };
+ };
+ };
+};
+++ /dev/null
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * License terms: GNU General Public License (GPL) version 2
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/bug.h>
-#include <linux/string.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf-generic.h>
-
-#include <asm/mach-types.h>
-
-#include "board-mop500.h"
-
-/* These simply sets bias for pins */
-#define BIAS(a,b) static unsigned long a[] = { b }
-
-BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1));
-BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0));
-
-#define AB8505_MUX_HOG(group, func) \
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_HOG(pin, conf) \
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-ab8505.0", pin, abx500_##conf)
-
-#define AB8505_MUX_STATE(group, func, dev, state) \
- PIN_MAP_MUX_GROUP(dev, state, "pinctrl-ab8505.0", group, func)
-#define AB8505_PIN_STATE(pin, conf, dev, state) \
- PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-ab8505.0", pin, abx500_##conf)
-
-static struct pinctrl_map __initdata ab8505_pinmap[] = {
- /* Sysclkreq2 */
- AB8505_MUX_STATE("sysclkreq2_d_1", "sysclkreq", "regulator.36", PINCTRL_STATE_DEFAULT),
- AB8505_PIN_STATE("GPIO1_N4", in_nopull, "regulator.36", PINCTRL_STATE_DEFAULT),
- /* sysclkreq2 disable, mux in gpio configured in input pulldown */
- AB8505_MUX_STATE("gpio1_a_1", "gpio", "regulator.36", PINCTRL_STATE_SLEEP),
- AB8505_PIN_STATE("GPIO1_N4", in_pd, "regulator.36", PINCTRL_STATE_SLEEP),
-
- /* pins 2 is muxed in GPIO, configured in INPUT PULL DOWN */
- AB8505_MUX_HOG("gpio2_a_1", "gpio"),
- AB8505_PIN_HOG("GPIO2_R5", in_pd),
-
- /* Sysclkreq4 */
- AB8505_MUX_STATE("sysclkreq4_d_1", "sysclkreq", "regulator.37", PINCTRL_STATE_DEFAULT),
- AB8505_PIN_STATE("GPIO3_P5", in_nopull, "regulator.37", PINCTRL_STATE_DEFAULT),
- /* sysclkreq4 disable, mux in gpio configured in input pulldown */
- AB8505_MUX_STATE("gpio3_a_1", "gpio", "regulator.37", PINCTRL_STATE_SLEEP),
- AB8505_PIN_STATE("GPIO3_P5", in_pd, "regulator.37", PINCTRL_STATE_SLEEP),
-
- AB8505_MUX_HOG("gpio10_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO10_B16", in_pd),
-
- AB8505_MUX_HOG("gpio11_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO11_B17", in_pd),
-
- AB8505_MUX_HOG("gpio13_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO13_D17", in_nopull),
-
- AB8505_MUX_HOG("pwmout1_d_1", "pwmout"),
- AB8505_PIN_HOG("GPIO14_C16", in_pd),
-
- AB8505_MUX_HOG("adi2_d_1", "adi2"),
- AB8505_PIN_HOG("GPIO17_P2", in_pd),
- AB8505_PIN_HOG("GPIO18_N3", in_pd),
- AB8505_PIN_HOG("GPIO19_T1", in_pd),
- AB8505_PIN_HOG("GPIO20_P3", in_pd),
-
- AB8505_MUX_HOG("gpio34_a_1", "gpio"),
- AB8505_PIN_HOG("GPIO34_H14", in_pd),
-
- AB8505_MUX_HOG("modsclsda_d_1", "modsclsda"),
- AB8505_PIN_HOG("GPIO40_J15", in_pd),
- AB8505_PIN_HOG("GPIO41_J14", in_pd),
-
- AB8505_MUX_HOG("gpio50_d_1", "gpio"),
- AB8505_PIN_HOG("GPIO50_L4", in_nopull),
-
- AB8505_MUX_HOG("resethw_d_1", "resethw"),
- AB8505_PIN_HOG("GPIO52_D16", in_pd),
-
- AB8505_MUX_HOG("service_d_1", "service"),
- AB8505_PIN_HOG("GPIO53_D15", in_pd),
-};
-
-void __init mop500_pinmaps_init(void)
-{
- if (machine_is_u8520())
- pinctrl_register_mappings(ab8505_pinmap,
- ARRAY_SIZE(ab8505_pinmap));
-}
projects / cascardo / linux.git / commitdiff