staging: comedi: dt2811: simplify A/D reference configuration

The analog inputs are confgured with jumpers on the board to be:
  * 16 single-ended inputs
  * 8 differential inputs
  * 16 pseudo-differential inputs (common ground)

Simplify the handling of this configuration option and properly set
the subdev_flags based on the selected input mode.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

diff --git a/drivers/staging/comedi/drivers/dt2811.c b/drivers/staging/comedi/drivers/dt2811.c
index b60ee74..1fe657c 100644 (file)
--- a/drivers/staging/comedi/drivers/dt2811.c
+++ b/drivers/staging/comedi/drivers/dt2811.c
@@ -29,10 +29,10 @@
  * Configuration options:
  *   [0] - I/O port base address
  *   [1] - IRQ, although this is currently unused
- *   [2] - A/D reference
- *        0 = single-ended
- *        1 = differential
- *        2 = pseudo-differential (common reference)
+ *   [2] - A/D reference (# of analog inputs)
+ *        0 = single-ended (16 channels)
+ *        1 = differential (8 channels)
+ *        2 = pseudo-differential (16 channels)
  *   [3] - A/D range
  *        0 = [-5, 5]
  *        1 = [-2.5, 2.5]
@@ -184,9 +184,6 @@ enum { card_2811_pgh, card_2811_pgl };
 struct dt2811_private {
        int ntrig;
        int curadchan;
-       enum {
-               adc_singleended, adc_diff, adc_pseudo_diff
-       } adc_mux;
 };
 
 static int dt2811_ai_eoc(struct comedi_device *dev,
@@ -293,26 +290,13 @@ static int dt2811_attach(struct comedi_device *dev, struct comedi_devconfig *it)
        if (!devpriv)
                return -ENOMEM;
 
-       switch (it->options[2]) {
-       case 0:
-               devpriv->adc_mux = adc_singleended;
-               break;
-       case 1:
-               devpriv->adc_mux = adc_diff;
-               break;
-       case 2:
-               devpriv->adc_mux = adc_pseudo_diff;
-               break;
-       default:
-               devpriv->adc_mux = adc_singleended;
-               break;
-       }
-
        s = &dev->subdevices[0];
        /* initialize the ADC subdevice */
        s->type = COMEDI_SUBD_AI;
-       s->subdev_flags = SDF_READABLE | SDF_GROUND;
-       s->n_chan = devpriv->adc_mux == adc_diff ? 8 : 16;
+       s->subdev_flags = SDF_READABLE |
+                         (it->options[2] == 1) ? SDF_DIFF :
+                         (it->options[2] == 2) ? SDF_COMMON : SDF_GROUND;
+       s->n_chan = (it->options[2] == 1) ? 8 : 16;
        s->insn_read = dt2811_ai_insn;
        s->maxdata = 0xfff;
        switch (it->options[3]) {