ARM: dts: lpc18xx: add can nodes

Signed-off-by: Joachim Eastwood <manabian@gmail.com>

diff --git a/arch/arm/boot/dts/lpc18xx.dtsi b/arch/arm/boot/dts/lpc18xx.dtsi
index 920cdb2..813ed93 100644 (file)
--- a/arch/arm/boot/dts/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/lpc18xx.dtsi
@@ -156,6 +156,14 @@
                        clocks = <&ccu1 CLK_CPU_SCU>;
                };
 
+               can1: can@400a4000 {
+                       compatible = "bosch,c_can";
+                       reg = <0x400a4000 0x1000>;
+                       interrupts = <43>;
+                       clocks = <&ccu1 CLK_APB1_CAN1>;
+                       status = "disabled";
+               };
+
                uart2: serial@400c1000 {
                        compatible = "nxp,lpc1850-uart", "ns16550a";
                        reg = <0x400c1000 0x1000>;
@@ -203,6 +211,14 @@
                        status = "disabled";
                };
 
+               can0: can@400e2000 {
+                       compatible = "bosch,c_can";
+                       reg = <0x400e2000 0x1000>;
+                       interrupts = <51>;
+                       clocks = <&ccu1 CLK_APB3_CAN0>;
+                       status = "disabled";
+               };
+
                gpio: gpio@400f4000 {
                        compatible = "nxp,lpc1850-gpio";
                        reg = <0x400f4000 0x4000>;