--- /dev/null
+What: /sys/bus/rbd/
+Date: November 2010
+Contact: Yehuda Sadeh <yehuda@hq.newdream.net>,
+ Sage Weil <sage@newdream.net>
+Description:
+
+Being used for adding and removing rbd block devices.
+
+Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
+
+ $ echo "192.168.0.1 name=admin rbd foo" > /sys/bus/rbd/add
+
+The snapshot name can be "-" or omitted to map the image read/write. A <dev-id>
+will be assigned for any registered block device. If snapshot is used, it will
+be mapped read-only.
+
+Removal of a device:
+
+ $ echo <dev-id> > /sys/bus/rbd/remove
+
+Entries under /sys/bus/rbd/devices/<dev-id>/
+--------------------------------------------
+
+client_id
+
+ The ceph unique client id that was assigned for this specific session.
+
+major
+
+ The block device major number.
+
+name
+
+ The name of the rbd image.
+
+pool
+
+ The pool where this rbd image resides. The pool-name pair is unique
+ per rados system.
+
+size
+
+ The size (in bytes) of the mapped block device.
+
+refresh
+
+ Writing to this file will reread the image header data and set
+ all relevant datastructures accordingly.
+
+current_snap
+
+ The current snapshot for which the device is mapped.
+
+create_snap
+
+ Create a snapshot:
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_create
+
+rollback_snap
+
+ Rolls back data to the specified snapshot. This goes over the entire
+ list of rados blocks and sends a rollback command to each.
+
+ $ echo <snap-name> > /sys/bus/rbd/devices/<dev-id>/snap_rollback
+
+snap_*
+
+ A directory per each snapshot
+
+
+Entries under /sys/bus/rbd/devices/<dev-id>/snap_<snap-name>
+-------------------------------------------------------------
+
+id
+
+ The rados internal snapshot id assigned for this snapshot
+
+size
+
+ The size of the image when this snapshot was taken.
+
+
KernelVersion: 2.6.20
Contact: "Corentin Chary" <corentincj@iksaif.net>
Description:
- Control the bluetooth device. 1 means on, 0 means off.
+ Control the wlan device. 1 means on, 0 means off.
This may control the led, the device or both.
Users: Lapsus
+
+What: /sys/devices/platform/asus_laptop/wimax
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wimax device. 1 means on, 0 means off.
+
+What: /sys/devices/platform/asus_laptop/wwan
+Date: October 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Control the wwan (3G) device. 1 means on, 0 means off.
--- /dev/null
+What: /sys/devices/platform/eeepc-wmi/cpufv
+Date: Oct 2010
+KernelVersion: 2.6.37
+Contact: "Corentin Chary" <corentincj@iksaif.net>
+Description:
+ Change CPU clock configuration (write-only).
+ There are three available clock configuration:
+ * 0 -> Super Performance Mode
+ * 1 -> High Performance Mode
+ * 2 -> Power Saving Mode
+++ /dev/null
-
-Device Interfaces
-
-Introduction
-~~~~~~~~~~~~
-
-Device interfaces are the logical interfaces of device classes that correlate
-directly to userspace interfaces, like device nodes.
-
-Each device class may have multiple interfaces through which you can
-access the same device. An input device may support the mouse interface,
-the 'evdev' interface, and the touchscreen interface. A SCSI disk would
-support the disk interface, the SCSI generic interface, and possibly a raw
-device interface.
-
-Device interfaces are registered with the class they belong to. As devices
-are added to the class, they are added to each interface registered with
-the class. The interface is responsible for determining whether the device
-supports the interface or not.
-
-
-Programming Interface
-~~~~~~~~~~~~~~~~~~~~~
-
-struct device_interface {
- char * name;
- rwlock_t lock;
- u32 devnum;
- struct device_class * devclass;
-
- struct list_head node;
- struct driver_dir_entry dir;
-
- int (*add_device)(struct device *);
- int (*add_device)(struct intf_data *);
-};
-
-int interface_register(struct device_interface *);
-void interface_unregister(struct device_interface *);
-
-
-An interface must specify the device class it belongs to. It is added
-to that class's list of interfaces on registration.
-
-
-Interfaces can be added to a device class at any time. Whenever it is
-added, each device in the class is passed to the interface's
-add_device callback. When an interface is removed, each device is
-removed from the interface.
-
-
-Devices
-~~~~~~~
-Once a device is added to a device class, it is added to each
-interface that is registered with the device class. The class
-is expected to place a class-specific data structure in
-struct device::class_data. The interface can use that (along with
-other fields of struct device) to determine whether or not the driver
-and/or device support that particular interface.
-
-
-Data
-~~~~
-
-struct intf_data {
- struct list_head node;
- struct device_interface * intf;
- struct device * dev;
- u32 intf_num;
-};
-
-int interface_add_data(struct interface_data *);
-
-The interface is responsible for allocating and initializing a struct
-intf_data and calling interface_add_data() to add it to the device's list
-of interfaces it belongs to. This list will be iterated over when the device
-is removed from the class (instead of all possible interfaces for a class).
-This structure should probably be embedded in whatever per-device data
-structure the interface is allocating anyway.
-
-Devices are enumerated within the interface. This happens in interface_add_data()
-and the enumerated value is stored in the struct intf_data for that device.
-
-sysfs
-~~~~~
-Each interface is given a directory in the directory of the device
-class it belongs to:
-
-Interfaces get a directory in the class's directory as well:
-
- class/
- `-- input
- |-- devices
- |-- drivers
- |-- mouse
- `-- evdev
-
-When a device is added to the interface, a symlink is created that points
-to the device's directory in the physical hierarchy:
-
- class/
- `-- input
- |-- devices
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- |-- drivers
- | `-- usb:usb_mouse -> ../../../bus/drivers/usb_mouse/
- |-- mouse
- | `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
- `-- evdev
- `-- 1 -> ../../../root/pci0/00:1f.0/usb_bus/00:1f.2-1:0/
-
-
-Future Plans
-~~~~~~~~~~~~
-A device interface is correlated directly with a userspace interface
-for a device, specifically a device node. For instance, a SCSI disk
-exposes at least two interfaces to userspace: the standard SCSI disk
-interface and the SCSI generic interface. It might also export a raw
-device interface.
-
-Many interfaces have a major number associated with them and each
-device gets a minor number. Or, multiple interfaces might share one
-major number, and each will receive a range of minor numbers (like in
-the case of input devices).
-
-These major and minor numbers could be stored in the interface
-structure. Major and minor allocations could happen when the interface
-is registered with the class, or via a helper function.
-
The representation of the above is reflected in the directory tree
in EDAC's sysfs interface. Starting in directory
/sys/devices/system/edac/mc each memory controller will be represented
-by its own 'mcX' directory, where 'X" is the index of the MC.
+by its own 'mcX' directory, where 'X' is the index of the MC.
..../edac/mc/
....
Under each 'mcX' directory each 'csrowX' is again represented by a
-'csrowX', where 'X" is the csrow index:
+'csrowX', where 'X' is the csrow index:
.../mc/mc0/
In 'mcX' directories are EDAC control and attribute files for
-this 'X" instance of the memory controllers:
+this 'X' instance of the memory controllers:
Counter reset control file:
'csrowX' DIRECTORIES
In the 'csrowX' directories are EDAC control and attribute files for
-this 'X" instance of csrow:
+this 'X' instance of csrow:
Total Uncorrectable Errors count attribute file:
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
int (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*launder_page) (struct page *);
locking rules:
- All except set_page_dirty may block
+ All except set_page_dirty and freepage may block
BKL PageLocked(page) i_mutex
writepage: no yes, unlocks (see below)
bmap: no
invalidatepage: no yes
releasepage: no yes
+freepage: no yes
direct_IO: no
launder_page: no yes
indicate that the buffers are (or may be) freeable. If ->releasepage is zero,
the kernel assumes that the fs has no private interest in the buffers.
+ ->freepage() is called when the kernel is done dropping the page
+from the page cache.
+
->launder_page() may be called prior to releasing a page if
it is still found to be dirty. It returns zero if the page was successfully
cleaned, or an error value if not. Note that in order to prevent the page
sector_t (*bmap)(struct address_space *, sector_t);
int (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, int);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
struct page* (*get_xip_page)(struct address_space *, sector_t,
releasepage: releasepage is called on PagePrivate pages to indicate
that the page should be freed if possible. ->releasepage
should remove any private data from the page and clear the
- PagePrivate flag. It may also remove the page from the
- address_space. If this fails for some reason, it may indicate
- failure with a 0 return value.
- This is used in two distinct though related cases. The first
- is when the VM finds a clean page with no active users and
+ PagePrivate flag. If releasepage() fails for some reason, it must
+ indicate failure with a 0 return value.
+ releasepage() is used in two distinct though related cases. The
+ first is when the VM finds a clean page with no active users and
wants to make it a free page. If ->releasepage succeeds, the
page will be removed from the address_space and become free.
need to ensure this. Possibly it can clear the PageUptodate
bit if it cannot free private data yet.
+ freepage: freepage is called once the page is no longer visible in
+ the page cache in order to allow the cleanup of any private
+ data. Since it may be called by the memory reclaimer, it
+ should not assume that the original address_space mapping still
+ exists, and it should not block.
+
direct_IO: called by the generic read/write routines to perform
direct_IO - that is IO requests which bypass the page cache
and transfer data directly between the storage and the
reset_devices [KNL] Force drivers to reset the underlying device
during initialization.
- resource_alloc_from_bottom
- Allocate new resources from the beginning of available
- space, not the end. If you need to use this, please
- report a bug.
-
resume= [SWSUSP]
Specify the partition device for software suspend
Count buffering overhead as bytes/2^tcp_adv_win_scale
(if tcp_adv_win_scale > 0) or bytes-bytes/2^(-tcp_adv_win_scale),
if it is <= 0.
+ Possible values are [-31, 31], inclusive.
Default: 2
tcp_allowed_congestion_control - STRING
zero)
bool pm_runtime_suspended(struct device *dev);
- - return true if the device's runtime PM status is 'suspended', or false
- otherwise
+ - return true if the device's runtime PM status is 'suspended' and its
+ 'power.disable_depth' field is equal to zero, or false otherwise
void pm_runtime_allow(struct device *dev);
- set the power.runtime_auto flag for the device and decrease its usage
S: Maintained
ARM/BCMRING ARM ARCHITECTURE
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-bcmring
ARM/BCMRING MTD NAND DRIVER
-M: Leo Chen <leochen@broadcom.com>
+M: Jiandong Zheng <jdzheng@broadcom.com>
M: Scott Branden <sbranden@broadcom.com>
L: linux-mtd@lists.infradead.org
S: Maintained
F: drivers/mmc/host/msm_sdcc.h
F: drivers/serial/msm_serial.h
F: drivers/serial/msm_serial.c
-T: git git://codeaurora.org/quic/kernel/dwalker/linux-msm.git
+T: git git://codeaurora.org/quic/kernel/davidb/linux-msm.git
S: Maintained
ARM/TOSA MACHINE SUPPORT
DRIVER CORE, KOBJECTS, DEBUGFS AND SYSFS
M: Greg Kroah-Hartman <gregkh@suse.de>
-T: quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6.git
S: Supported
F: Documentation/kobject.txt
F: drivers/base/
INTEL DRM DRIVERS (excluding Poulsbo, Moorestown and derivative chipsets)
M: Chris Wilson <chris@chris-wilson.co.uk>
-L: intel-gfx@lists.freedesktop.org
+L: intel-gfx@lists.freedesktop.org (subscribers-only)
L: dri-devel@lists.freedesktop.org
T: git git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel.git
S: Supported
NETEFFECT IWARP RNIC DRIVER (IW_NES)
M: Faisal Latif <faisal.latif@intel.com>
-M: Chien Tung <chien.tin.tung@intel.com>
L: linux-rdma@vger.kernel.org
-W: http://www.neteffect.com
+W: http://www.intel.com/Products/Server/Adapters/Server-Cluster/Server-Cluster-overview.htm
S: Supported
F: drivers/infiniband/hw/nes/
TULIP NETWORK DRIVERS
M: Grant Grundler <grundler@parisc-linux.org>
-M: Kyle McMartin <kyle@mcmartin.ca>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/tulip/
F: include/sound/wm????.h
F: sound/soc/codecs/wm*
+WORKQUEUE
+M: Tejun Heo <tj@kernel.org>
+L: linux-kernel@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq.git
+S: Maintained
+F: include/linux/workqueue.h
+F: kernel/workqueue.c
+F: Documentation/workqueue.txt
+
X.25 NETWORK LAYER
M: Andrew Hendry <andrew.hendry@gmail.com>
L: linux-x25@vger.kernel.org
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 37
-EXTRAVERSION = -rc3
+EXTRAVERSION = -rc6
NAME = Flesh-Eating Bats with Fangs
# *DOCUMENTATION*
select GENERIC_ATOMIC64 if (!CPU_32v6K || !AEABI)
select HAVE_OPROFILE if (HAVE_PERF_EVENTS)
select HAVE_ARCH_KGDB
- select HAVE_KPROBES if (!XIP_KERNEL)
+ select HAVE_KPROBES if (!XIP_KERNEL && !THUMB2_KERNEL)
select HAVE_KRETPROBES if (HAVE_KPROBES)
select HAVE_FUNCTION_TRACER if (!XIP_KERNEL)
select HAVE_FTRACE_MCOUNT_RECORD if (!XIP_KERNEL)
config THUMB2_KERNEL
bool "Compile the kernel in Thumb-2 mode"
- depends on CPU_V7 && EXPERIMENTAL
+ depends on CPU_V7 && !CPU_V6 && EXPERIMENTAL
select AEABI
select ARM_ASM_UNIFIED
help
config FPE_NWFPE
bool "NWFPE math emulation"
- depends on !AEABI || OABI_COMPAT
+ depends on (!AEABI || OABI_COMPAT) && !THUMB2_KERNEL
---help---
Say Y to include the NWFPE floating point emulator in the kernel.
This is necessary to run most binaries. Linux does not currently
$(obj)/uImage: LOADADDR=$(ZRELADDR)
endif
-ifeq ($(CONFIG_THUMB2_KERNEL),y)
-# Set bit 0 to 1 so that "mov pc, rx" switches to Thumb-2 mode
-$(obj)/uImage: STARTADDR=$(shell echo $(LOADADDR) | sed -e "s/.$$/1/")
-else
$(obj)/uImage: STARTADDR=$(LOADADDR)
-endif
$(obj)/uImage: $(obj)/zImage FORCE
$(call if_changed,uimage)
.size _start, . - _start
+ .align
+
.type data,#object
data: .word initrd_start @ source initrd address
.word initrd_phys @ destination initrd address
* sort out different calling conventions
*/
.align
+ .arm @ Always enter in ARM state
start:
.type start,#function
- .rept 8
+ THUMB( adr r12, BSYM(1f) )
+ THUMB( bx r12 )
+ THUMB( .rept 6 )
+ ARM( .rept 8 )
mov r0, r0
.endr
.word 0x016f2818 @ Magic numbers to help the loader
.word start @ absolute load/run zImage address
.word _edata @ zImage end address
+ THUMB( .thumb )
1: mov r7, r1 @ save architecture ID
mov r8, r2 @ save atags pointer
ldr sp, [r0, #28]
#ifdef CONFIG_AUTO_ZRELADDR
@ determine final kernel image address
- and r4, pc, #0xf8000000
+ mov r4, pc
+ and r4, r4, #0xf8000000
add r4, r4, #TEXT_OFFSET
#else
ldr r4, =zreladdr
*/
mov r1, #0x1e
orr r1, r1, #3 << 10
- mov r2, pc, lsr #20
+ mov r2, pc
+ mov r2, r2, lsr #20
orr r1, r1, r2, lsl #20
add r0, r3, r2, lsl #2
str r1, [r0], #4
unsigned int shift = (irq % 4) * 8;
unsigned int cpu = cpumask_first(mask_val);
u32 val;
+ struct irq_desc *desc;
spin_lock(&irq_controller_lock);
- irq_desc[irq].node = cpu;
+ desc = irq_to_desc(irq);
+ if (desc == NULL) {
+ spin_unlock(&irq_controller_lock);
+ return -EINVAL;
+ }
+ desc->node = cpu;
val = readl(reg) & ~(0xff << shift);
val |= 1 << (cpu + shift);
writel(val, reg);
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
{
- unsigned int max_irq, i;
+ unsigned int gic_irqs, irq_limit, i;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
/*
* Find out how many interrupts are supported.
- */
- max_irq = readl(base + GIC_DIST_CTR) & 0x1f;
- max_irq = (max_irq + 1) * 32;
-
- /*
* The GIC only supports up to 1020 interrupt sources.
- * Limit this to either the architected maximum, or the
- * platform maximum.
*/
- if (max_irq > max(1020, NR_IRQS))
- max_irq = max(1020, NR_IRQS);
+ gic_irqs = readl(base + GIC_DIST_CTR) & 0x1f;
+ gic_irqs = (gic_irqs + 1) * 32;
+ if (gic_irqs > 1020)
+ gic_irqs = 1020;
/*
* Set all global interrupts to be level triggered, active low.
*/
- for (i = 32; i < max_irq; i += 16)
+ for (i = 32; i < gic_irqs; i += 16)
writel(0, base + GIC_DIST_CONFIG + i * 4 / 16);
/*
* Set all global interrupts to this CPU only.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(cpumask, base + GIC_DIST_TARGET + i * 4 / 4);
/*
* Set priority on all global interrupts.
*/
- for (i = 32; i < max_irq; i += 4)
+ for (i = 32; i < gic_irqs; i += 4)
writel(0xa0a0a0a0, base + GIC_DIST_PRI + i * 4 / 4);
/*
* Disable all interrupts. Leave the PPI and SGIs alone
* as these enables are banked registers.
*/
- for (i = 32; i < max_irq; i += 32)
+ for (i = 32; i < gic_irqs; i += 32)
writel(0xffffffff, base + GIC_DIST_ENABLE_CLEAR + i * 4 / 32);
+ /*
+ * Limit number of interrupts registered to the platform maximum
+ */
+ irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
+ if (WARN_ON(irq_limit > NR_IRQS))
+ irq_limit = NR_IRQS;
+
/*
* Setup the Linux IRQ subsystem.
*/
- for (i = irq_start; i < gic_data[gic_nr].irq_offset + max_irq; i++) {
+ for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_handler(i, handle_level_irq);
--- /dev/null
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_MACH_ONEARM=y
+CONFIG_ARCH_AT91RM9200DK=y
+CONFIG_MACH_AT91RM9200EK=y
+CONFIG_MACH_CSB337=y
+CONFIG_MACH_CSB637=y
+CONFIG_MACH_CARMEVA=y
+CONFIG_MACH_ATEB9200=y
+CONFIG_MACH_KB9200=y
+CONFIG_MACH_PICOTUX2XX=y
+CONFIG_MACH_KAFA=y
+CONFIG_MACH_ECBAT91=y
+CONFIG_MACH_YL9200=y
+CONFIG_MACH_CPUAT91=y
+CONFIG_MACH_ECO920=y
+CONFIG_MTD_AT91_DATAFLASH_CARD=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=100
+# CONFIG_ARM_THUMB is not set
+CONFIG_PCCARD=y
+CONFIG_AT91_CF=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x10000000
+CONFIG_ZBOOT_ROM_BSS=0x20040000
+CONFIG_KEXEC=y
+CONFIG_FPE_NWFPE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_NET_IPIP=m
+CONFIG_NET_IPGRE=m
+CONFIG_INET_AH=m
+CONFIG_INET_ESP=m
+CONFIG_INET_IPCOMP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+CONFIG_INET_XFRM_MODE_BEET=m
+CONFIG_IPV6_PRIVACY=y
+CONFIG_IPV6_ROUTER_PREF=y
+CONFIG_IPV6_ROUTE_INFO=y
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_MIP6=m
+CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_BRIDGE=m
+CONFIG_VLAN_8021Q=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=m
+CONFIG_BT_SCO=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_AFS_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PLATRAM=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_PLATFORM=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_LEGACY=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_BLK_DEV_SR_VENDOR=y
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+CONFIG_PHYLIB=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NET_ETHERNET=y
+CONFIG_ARM_AT91_ETHER=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_USB_CATC=m
+CONFIG_USB_KAWETH=m
+CONFIG_USB_PEGASUS=m
+CONFIG_USB_RTL8150=m
+CONFIG_USB_USBNET=m
+CONFIG_USB_NET_DM9601=m
+CONFIG_USB_NET_GL620A=m
+CONFIG_USB_NET_PLUSB=m
+CONFIG_USB_NET_RNDIS_HOST=m
+CONFIG_USB_ALI_M5632=y
+CONFIG_USB_AN2720=y
+CONFIG_USB_EPSON2888=y
+CONFIG_PPP=y
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_ASYNC=y
+CONFIG_PPP_DEFLATE=y
+CONFIG_PPP_BSDCOMP=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPPOE=m
+CONFIG_SLIP=m
+CONFIG_SLIP_COMPRESSED=y
+CONFIG_SLIP_SMART=y
+CONFIG_SLIP_MODE_SLIP6=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=32
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_SPI_BITBANG=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_SENSORS_ADM1021=m
+CONFIG_SENSORS_ADM1025=m
+CONFIG_SENSORS_ADM1026=m
+CONFIG_SENSORS_ADM1029=m
+CONFIG_SENSORS_ADM1031=m
+CONFIG_SENSORS_ADM9240=m
+CONFIG_SENSORS_DS1621=m
+CONFIG_SENSORS_GL518SM=m
+CONFIG_SENSORS_GL520SM=m
+CONFIG_SENSORS_IT87=m
+CONFIG_SENSORS_LM63=m
+CONFIG_SENSORS_LM73=m
+CONFIG_SENSORS_LM75=m
+CONFIG_SENSORS_LM77=m
+CONFIG_SENSORS_LM78=m
+CONFIG_SENSORS_LM80=m
+CONFIG_SENSORS_LM83=m
+CONFIG_SENSORS_LM85=m
+CONFIG_SENSORS_LM87=m
+CONFIG_SENSORS_LM90=m
+CONFIG_SENSORS_LM92=m
+CONFIG_SENSORS_MAX1619=m
+CONFIG_SENSORS_PCF8591=m
+CONFIG_SENSORS_SMSC47B397=m
+CONFIG_SENSORS_W83781D=m
+CONFIG_SENSORS_W83791D=m
+CONFIG_SENSORS_W83792D=m
+CONFIG_SENSORS_W83793=m
+CONFIG_SENSORS_W83L785TS=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91RM9200_WATCHDOG=y
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_TILEBLITTING=y
+CONFIG_FB_S1D13XXX=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=m
+CONFIG_USB_PRINTER=m
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_CONSOLE=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_KEYSPAN=y
+CONFIG_USB_SERIAL_KEYSPAN_MPR=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
+CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19=y
+CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
+CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
+CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
+CONFIG_USB_SERIAL_MCT_U232=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+# CONFIG_RTC_HCTOSYS is not set
+CONFIG_RTC_DRV_DS1307=y
+CONFIG_RTC_DRV_PCF8563=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_FS_XATTR is not set
+CONFIG_REISERFS_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=m
+CONFIG_TMPFS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_RUBIN=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_SMB_FS=m
+CONFIG_CIFS=m
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_737=m
+CONFIG_NLS_CODEPAGE_775=m
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_CODEPAGE_852=m
+CONFIG_NLS_CODEPAGE_855=m
+CONFIG_NLS_CODEPAGE_857=m
+CONFIG_NLS_CODEPAGE_860=m
+CONFIG_NLS_CODEPAGE_861=m
+CONFIG_NLS_CODEPAGE_862=m
+CONFIG_NLS_CODEPAGE_863=m
+CONFIG_NLS_CODEPAGE_864=m
+CONFIG_NLS_CODEPAGE_865=m
+CONFIG_NLS_CODEPAGE_866=m
+CONFIG_NLS_CODEPAGE_869=m
+CONFIG_NLS_CODEPAGE_936=m
+CONFIG_NLS_CODEPAGE_950=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_CODEPAGE_949=m
+CONFIG_NLS_CODEPAGE_874=m
+CONFIG_NLS_ISO8859_8=m
+CONFIG_NLS_CODEPAGE_1250=m
+CONFIG_NLS_CODEPAGE_1251=m
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_2=m
+CONFIG_NLS_ISO8859_3=m
+CONFIG_NLS_ISO8859_4=m
+CONFIG_NLS_ISO8859_5=m
+CONFIG_NLS_ISO8859_6=m
+CONFIG_NLS_ISO8859_7=m
+CONFIG_NLS_ISO8859_9=m
+CONFIG_NLS_ISO8859_13=m
+CONFIG_NLS_ISO8859_14=m
+CONFIG_NLS_ISO8859_15=m
+CONFIG_NLS_KOI8_R=m
+CONFIG_NLS_KOI8_U=m
+CONFIG_NLS_UTF8=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_FTRACE is not set
+CONFIG_CRYPTO_PCBC=y
+CONFIG_CRYPTO_SHA1=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_ECO920=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_S1D13XXX=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_PCCARD=m
-CONFIG_AT91_CF=m
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_PM=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-# CONFIG_IPV6 is not set
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_BLK_DEV_NBD=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=m
-CONFIG_TUN=m
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_USBNET=y
-CONFIG_USB_NET_GL620A=y
-CONFIG_USB_NET_PLUSB=y
-CONFIG_USB_NET_RNDIS_HOST=y
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_PPP=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPPOE=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=y
-CONFIG_USB_HID=m
-CONFIG_HID_PID=y
-CONFIG_USB_HIDDEV=y
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_STORAGE_DATAFAB=m
-CONFIG_USB_STORAGE_FREECOM=m
-CONFIG_USB_STORAGE_USBAT=m
-CONFIG_USB_STORAGE_SDDR09=m
-CONFIG_USB_STORAGE_SDDR55=m
-CONFIG_USB_STORAGE_JUMPSHOT=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=m
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_USB_GADGET=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-CONFIG_REISERFS_FS=m
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_NFSD=m
-CONFIG_NFSD_V4=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_BSD_DISKLABEL=y
-CONFIG_MINIX_SUBPARTITION=y
-CONFIG_SOLARIS_X86_PARTITION=y
-CONFIG_UNIXWARE_DISKLABEL=y
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_UTF8=m
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRC16=m
-CONFIG_LIBCRC32C=m
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIO=m
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_MMC=m
-CONFIG_MMC_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-# CONFIG_DNOTIFY is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_MISC_DEVICES is not set
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_ASYNC=y
-CONFIG_PPP_DEFLATE=y
-CONFIG_PPP_BSDCOMP=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_CRAMFS=y
-CONFIG_MINIX_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB337=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc1"
-# CONFIG_RTC_INTF_SYSFS is not set
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_CSB637=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,38400 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_CONSOLE=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_KEYSPAN=y
-CONFIG_USB_SERIAL_KEYSPAN_MPR=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
-CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19=y
-CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
-CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
-CONFIG_USB_SERIAL_KEYSPAN_USA49WLC=y
-CONFIG_USB_SERIAL_MCT_U232=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="rootfstype=reiserfs root=/dev/mmcblk0p1 console=ttyS0,115200n8 rootdelay=1"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_AFS_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_PPP=y
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_VGA_CONSOLE is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KAFA=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PREEMPT=y
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20800000,10M root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK_RO=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=32
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_HCTOSYS is not set
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT3_FS=y
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=m
-CONFIG_NFS_V3=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_DES=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_AUDIT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_KB9200=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_CMDLINE="noinitrd root=/dev/mtdblock0 rootfstype=jffs2 mem=64M"
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_FIRMWARE_IN_KERNEL is not set
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=16384
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_CONSTANTS=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SPI_ATTRS=m
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_MINI_4x6=y
-# CONFIG_HID_SUPPORT is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-CONFIG_JFFS2_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_ONEARM=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_LEDS=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=ttyS0,115200 root=/dev/nfs ip=bootp mem=64M"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-# CONFIG_IPV6_SIT is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_MMC=y
-CONFIG_EXT2_FS=y
-CONFIG_INOTIFY=y
-CONFIG_TMPFS=y
-CONFIG_CRAMFS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_ROOT_NFS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=m
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_KALLSYMS is not set
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_KEXEC=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=m
-CONFIG_NET=y
-CONFIG_PACKET=m
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=m
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_NET_IPIP=m
-CONFIG_NET_IPGRE=m
-CONFIG_INET_AH=m
-CONFIG_INET_ESP=m
-CONFIG_INET_IPCOMP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=m
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_INET6_AH=m
-CONFIG_INET6_ESP=m
-CONFIG_INET6_IPCOMP=m
-CONFIG_IPV6_MIP6=m
-CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m
-CONFIG_IPV6_TUNNEL=m
-CONFIG_BRIDGE=m
-CONFIG_VLAN_8021Q=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=m
-CONFIG_BT_SCO=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_BNEP_MC_FILTER=y
-CONFIG_BT_BNEP_PROTO_FILTER=y
-CONFIG_BT_HIDP=m
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_BLK_DEV_LOOP=m
-CONFIG_EEPROM_LEGACY=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
-CONFIG_BLK_DEV_SR=m
-CONFIG_BLK_DEV_SR_VENDOR=y
-CONFIG_CHR_DEV_SG=m
-CONFIG_NETDEVICES=y
-CONFIG_TUN=m
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_USB_CATC=m
-CONFIG_USB_KAWETH=m
-CONFIG_USB_PEGASUS=m
-CONFIG_USB_RTL8150=m
-CONFIG_USB_USBNET=m
-CONFIG_USB_NET_DM9601=m
-CONFIG_USB_NET_GL620A=m
-CONFIG_USB_NET_PLUSB=m
-CONFIG_USB_NET_MCS7830=m
-CONFIG_USB_NET_RNDIS_HOST=m
-CONFIG_USB_ALI_M5632=y
-CONFIG_USB_AN2720=y
-CONFIG_USB_EPSON2888=y
-CONFIG_USB_KC2190=y
-CONFIG_PPP=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_MPPE=m
-CONFIG_PPPOE=m
-CONFIG_SLIP=m
-CONFIG_SLIP_COMPRESSED=y
-CONFIG_SLIP_SMART=y
-CONFIG_SLIP_MODE_SLIP6=y
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_I2C=m
-CONFIG_I2C_CHARDEV=m
-CONFIG_I2C_GPIO=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_ADM1021=m
-CONFIG_SENSORS_ADM1025=m
-CONFIG_SENSORS_ADM1026=m
-CONFIG_SENSORS_ADM1029=m
-CONFIG_SENSORS_ADM1031=m
-CONFIG_SENSORS_ADM9240=m
-CONFIG_SENSORS_DS1621=m
-CONFIG_SENSORS_GL518SM=m
-CONFIG_SENSORS_GL520SM=m
-CONFIG_SENSORS_IT87=m
-CONFIG_SENSORS_LM63=m
-CONFIG_SENSORS_LM75=m
-CONFIG_SENSORS_LM77=m
-CONFIG_SENSORS_LM78=m
-CONFIG_SENSORS_LM80=m
-CONFIG_SENSORS_LM83=m
-CONFIG_SENSORS_LM85=m
-CONFIG_SENSORS_LM87=m
-CONFIG_SENSORS_LM90=m
-CONFIG_SENSORS_LM92=m
-CONFIG_SENSORS_MAX1619=m
-CONFIG_SENSORS_PCF8591=m
-CONFIG_SENSORS_SMSC47B397=m
-CONFIG_SENSORS_W83781D=m
-CONFIG_SENSORS_W83791D=m
-CONFIG_SENSORS_W83792D=m
-CONFIG_SENSORS_W83793=m
-CONFIG_SENSORS_W83L785TS=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=m
-CONFIG_HID=m
-CONFIG_USB=m
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_ACM=m
-CONFIG_USB_PRINTER=m
-CONFIG_USB_STORAGE=m
-CONFIG_USB_SERIAL=m
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_PL2303=m
-CONFIG_MMC=m
-CONFIG_MMC_AT91=m
-CONFIG_RTC_CLASS=m
-CONFIG_RTC_DRV_AT91RM9200=m
-CONFIG_EXT2_FS=m
-CONFIG_EXT3_FS=m
-# CONFIG_EXT3_FS_XATTR is not set
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=m
-CONFIG_JOLIET=y
-CONFIG_UDF_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_NTFS_FS=m
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_NFS_FS=m
-CONFIG_SMB_FS=m
-CONFIG_CIFS=m
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_AMIGA_PARTITION=y
-CONFIG_NLS_DEFAULT="utf-8"
-CONFIG_NLS_CODEPAGE_437=m
-CONFIG_NLS_CODEPAGE_737=m
-CONFIG_NLS_CODEPAGE_775=m
-CONFIG_NLS_CODEPAGE_850=m
-CONFIG_NLS_CODEPAGE_852=m
-CONFIG_NLS_CODEPAGE_855=m
-CONFIG_NLS_CODEPAGE_857=m
-CONFIG_NLS_CODEPAGE_860=m
-CONFIG_NLS_CODEPAGE_861=m
-CONFIG_NLS_CODEPAGE_862=m
-CONFIG_NLS_CODEPAGE_863=m
-CONFIG_NLS_CODEPAGE_864=m
-CONFIG_NLS_CODEPAGE_865=m
-CONFIG_NLS_CODEPAGE_866=m
-CONFIG_NLS_CODEPAGE_869=m
-CONFIG_NLS_CODEPAGE_936=m
-CONFIG_NLS_CODEPAGE_950=m
-CONFIG_NLS_CODEPAGE_932=m
-CONFIG_NLS_CODEPAGE_949=m
-CONFIG_NLS_CODEPAGE_874=m
-CONFIG_NLS_ISO8859_8=m
-CONFIG_NLS_CODEPAGE_1250=m
-CONFIG_NLS_CODEPAGE_1251=m
-CONFIG_NLS_ASCII=m
-CONFIG_NLS_ISO8859_1=m
-CONFIG_NLS_ISO8859_2=m
-CONFIG_NLS_ISO8859_3=m
-CONFIG_NLS_ISO8859_4=m
-CONFIG_NLS_ISO8859_5=m
-CONFIG_NLS_ISO8859_6=m
-CONFIG_NLS_ISO8859_7=m
-CONFIG_NLS_ISO8859_9=m
-CONFIG_NLS_ISO8859_13=m
-CONFIG_NLS_ISO8859_14=m
-CONFIG_NLS_ISO8859_15=m
-CONFIG_NLS_KOI8_R=m
-CONFIG_NLS_KOI8_U=m
-CONFIG_NLS_UTF8=m
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_CRYPTO_NULL=m
-CONFIG_CRYPTO_TEST=m
-CONFIG_CRYPTO_LRW=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_XCBC=m
-CONFIG_CRYPTO_MD4=m
-CONFIG_CRYPTO_MICHAEL_MIC=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
-CONFIG_CRYPTO_TGR192=m
-CONFIG_CRYPTO_WP512=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_BLOWFISH=m
-CONFIG_CRYPTO_CAMELLIA=m
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
-CONFIG_CRYPTO_FCRYPT=m
-CONFIG_CRYPTO_KHAZAD=m
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_LIBCRC32C=m
+++ /dev/null
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200DK=y
-CONFIG_MACH_YL9200=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=32M console=ttyS0,115200 initrd=0x20410000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=3
-CONFIG_BLK_DEV_RAM_SIZE=8192
-# CONFIG_MISC_DEVICES is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_NETDEVICES=y
-CONFIG_PHYLIB=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_NET_ETHERNET=y
-CONFIG_ARM_AT91_ETHER=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=480
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_SERIO_SERPORT is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_SPI=y
-CONFIG_SPI_DEBUG=y
-CONFIG_SPI_ATMEL=y
-CONFIG_FB=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_DISPLAY_SUPPORT=y
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_M66592=y
-CONFIG_USB_FILE_STORAGE=m
-CONFIG_MMC=y
-CONFIG_MMC_DEBUG=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT3_FS=y
-CONFIG_REISERFS_FS=y
-CONFIG_INOTIFY=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_UDF_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=1
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_RUBIN=y
-CONFIG_CRAMFS=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_SLUB_DEBUG_ON=y
-CONFIG_DEBUG_KOBJECT=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_LIST=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
-CONFIG_DEBUG_LL=y
* A special ghost syscall is used for that (see traps.c).
*/
stmfd sp!, {r7, lr}
- ldr r7, =1f @ it's 20 bits
+ ldr r7, 1f @ it's 20 bits
swi __ARM_NR_cmpxchg
ldmfd sp!, {r7, pc}
1: .word __ARM_NR_cmpxchg
mrc p15, 0, r9, c0, c0 @ get processor id
bl __lookup_processor_type @ r5=procinfo r9=cpuid
movs r10, r5 @ invalid processor (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p @ yes, error 'p'
bl __lookup_machine_type @ r5=machinfo
movs r8, r5 @ invalid machine (r5=0)?
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_a @ yes, error 'a'
bl __vet_atags
#ifdef CONFIG_SMP_ON_UP
mov pc, lr
ENDPROC(__create_page_tables)
.ltorg
+ .align
__enable_mmu_loc:
.long .
.long __enable_mmu
bl __lookup_processor_type
movs r10, r5 @ invalid processor?
moveq r0, #'p' @ yes, error 'p'
+ THUMB( it eq ) @ force fixup-able long branch encoding
beq __error_p
/*
b secondary_start_kernel
ENDPROC(__secondary_switched)
+ .align
+
.type __secondary_data, %object
__secondary_data:
.long .
mov pc, lr
ENDPROC(__fixup_smp)
+ .align
1: .word .
.word __smpalt_begin
.word __smpalt_end
ldr r2,kexec_boot_atags
mov pc,lr
+ .align
+
.globl kexec_start_address
kexec_start_address:
.long 0x0
# AT91RM9200 board-specific support
obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_ARCH_AT91RM9200DK) += board-dk.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-ek.o
+obj-$(CONFIG_ARCH_AT91RM9200DK) += board-rm9200dk.o
+obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
obj-$(CONFIG_MACH_CSB337) += board-csb337.o
obj-$(CONFIG_MACH_CSB637) += board-csb637.o
obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o
+obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
# AT91SAM9260/AT91SAM9G20 board-specific support
obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
struct platform_device *atmel_default_console_device; /* the serial console device */
-void __init __deprecated at91_init_serial(struct at91_uart_config *config)
-{
- int i;
-
- /* Fill in list of supported UARTs */
- for (i = 0; i < config->nr_tty; i++) {
- switch (config->tty_map[i]) {
- case 0:
- configure_usart0_pins(ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_uarts[i] = &at91rm9200_uart0_device;
- at91_clock_associate("usart0_clk", &at91rm9200_uart0_device.dev, "usart");
- break;
- case 1:
- configure_usart1_pins(ATMEL_UART_CTS | ATMEL_UART_RTS | ATMEL_UART_DSR | ATMEL_UART_DTR | ATMEL_UART_DCD | ATMEL_UART_RI);
- at91_uarts[i] = &at91rm9200_uart1_device;
- at91_clock_associate("usart1_clk", &at91rm9200_uart1_device.dev, "usart");
- break;
- case 2:
- configure_usart2_pins(0);
- at91_uarts[i] = &at91rm9200_uart2_device;
- at91_clock_associate("usart2_clk", &at91rm9200_uart2_device.dev, "usart");
- break;
- case 3:
- configure_usart3_pins(0);
- at91_uarts[i] = &at91rm9200_uart3_device;
- at91_clock_associate("usart3_clk", &at91rm9200_uart3_device.dev, "usart");
- break;
- case 4:
- configure_dbgu_pins();
- at91_uarts[i] = &at91rm9200_dbgu_device;
- at91_clock_associate("mck", &at91rm9200_dbgu_device.dev, "usart");
- break;
- default:
- continue;
- }
- at91_uarts[i]->id = i; /* update ID number to mapped ID */
- }
-
- /* Set serial console device */
- if (config->console_tty < ATMEL_MAX_UART)
- atmel_default_console_device = at91_uarts[config->console_tty];
- if (!atmel_default_console_device)
- printk(KERN_INFO "AT91: No default serial console defined.\n");
-}
-
void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
{
struct platform_device *pdev;
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata onearm_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 3,
- .tty_map = { 4, 0, 1, -1, -1 }, /* ttyS0, ..., ttyS4 */
-};
-
static void __init onearm_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_PQFP);
- /* Setup the serial ports and console */
- at91_init_serial(&onearm_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init onearm_init_irq(void)
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-dk.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-static void __init dk_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init dk_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata dk_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata dk_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata dk_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata dk_cf_data = {
- .det_pin = AT91_PIN_PB0,
- .rst_pin = AT91_PIN_PC5,
- // .irq_pin = ... not connected
- // .vcc_pin = ... always powered
-};
-
-static struct at91_mmc_data __initdata dk_mmc_data = {
- .slot_b = 0,
- .wire4 = 1,
-};
-
-static struct spi_board_info dk_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
- { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
- .modalias = "ur6hcps2",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
- .modalias = "tlv1504",
- .chip_select = 2,
- .max_speed_hz = 20 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- }
-#endif
-};
-
-static struct i2c_board_info __initdata dk_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("x9429", 0x28),
- },
- {
- I2C_BOARD_INFO("24c1024", 0x50),
- }
-};
-
-static struct mtd_partition __initdata dk_nand_partition[] = {
- {
- .name = "NAND Partition 1",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
-{
- *num_partitions = ARRAY_SIZE(dk_nand_partition);
- return dk_nand_partition;
-}
-
-static struct atmel_nand_data __initdata dk_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = AT91_PIN_PB1,
- .rdy_pin = AT91_PIN_PC2,
- // .enable_pin = ... not there
- .partition_info = nand_partitions,
-};
-
-#define DK_FLASH_BASE AT91_CHIPSELECT_0
-#define DK_FLASH_SIZE SZ_2M
-
-static struct physmap_flash_data dk_flash_data = {
- .width = 2,
-};
-
-static struct resource dk_flash_resource = {
- .start = DK_FLASH_BASE,
- .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device dk_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &dk_flash_data,
- },
- .resource = &dk_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led dk_leds[] = {
- {
- .name = "led0",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init dk_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&dk_eth_data);
- /* USB Host */
- at91_add_device_usbh(&dk_usbh_data);
- /* USB Device */
- at91_add_device_udc(&dk_udc_data);
- at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* Compact Flash */
- at91_add_device_cf(&dk_cf_data);
- /* I2C */
- at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
- /* SPI */
- at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB7, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &dk_mmc_data);
-#endif
- /* NAND */
- at91_add_device_nand(&dk_nand_data);
- /* NOR Flash */
- platform_device_register(&dk_flash);
- /* LEDs */
- at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
- /* VGA */
-// dk_add_device_video();
-}
-
-MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
- /* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = dk_map_io,
- .init_irq = dk_init_irq,
- .init_machine = dk_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-ek.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/board.h>
-#include <mach/gpio.h>
-#include <mach/at91rm9200_mc.h>
-
-#include "generic.h"
-
-
-static void __init ek_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91rm9200_initialize(18432000, AT91RM9200_BGA);
-
- /* Setup the LEDs */
- at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
-
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init ek_init_irq(void)
-{
- at91rm9200_init_interrupts(NULL);
-}
-
-static struct at91_eth_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_mmc_data __initdata ek_mmc_data = {
- .det_pin = AT91_PIN_PB27,
- .slot_b = 0,
- .wire4 = 1,
- .wp_pin = AT91_PIN_PA17,
-};
-
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("dac3550", 0x4d),
- }
-};
-
-#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE SZ_2M
-
-static struct physmap_flash_data ek_flash_data = {
- .width = 2,
-};
-
-static struct resource ek_flash_resource = {
- .start = EK_FLASH_BASE,
- .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ek_flash_data,
- },
- .resource = &ek_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led ek_leds[] = {
- { /* "user led 1", DS2 */
- .name = "green",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "user led 2", DS4 */
- .name = "yellow",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 3", DS6 */
- .name = "red",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&ek_eth_data);
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mmc(0, &ek_mmc_data);
-#endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
-// ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
- /* Maintainer: SAN People/Atmel */
- .boot_params = AT91_SDRAM_BASE + 0x100,
- .timer = &at91rm9200_timer,
- .map_io = ek_map_io,
- .init_irq = ek_init_irq,
- .init_machine = ek_board_init,
-MACHINE_END
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata kafa_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 0, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init kafa_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
/* Set up the LEDs */
at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4);
- /* Setup the serial ports and console */
- at91_init_serial(&kafa_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
+ at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init kafa_init_irq(void)
#include <mach/board.h>
#include <mach/at91sam9_smc.h>
+#include <mach/stamp9g20.h>
#include "sam9_smc.h"
#include "generic.h"
static void __init pcontrol_g20_map_io(void)
{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx, Tx) only TTL -> JTAG connector X7 17,19 ) */
- at91_register_uart(0, 0, 0);
+ stamp9g20_map_io();
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
/* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
}
-/*
- * NAND flash 512MiB 1,8V 8-bit, sector size 128 KiB
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
-};
-
-/*
- * Bus timings; unit = 7.57ns
- */
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
.ncs_read_setup = 16,
.nrd_setup = 18,
.tdf_cycles = 1,
} };
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(3, &nand_smc_config);
- at91_add_device_nand(&nand_data);
-}
-
-
static void __init add_device_pcontrol(void)
{
/* configure chip-select 4 (IO compatible to 8051 X4 ) */
}
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- },
-};
-#else
-static struct at91_mmc_data __initdata mmc_data = {
- .wire4 = 1,
-};
-#endif
-
-
/*
* USB Host port
*/
};
-/*
- * Dallas 1-Wire DS2431
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-static void add_wire1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
static void __init pcontrol_g20_board_init(void)
{
- at91_add_device_serial();
- add_device_nand();
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
- at91_add_device_mci(0, &mmc_data);
-#else
- at91_add_device_mmc(0, &mmc_data);
-#endif
+ stamp9g20_board_init();
at91_add_device_usbh(&usbh_data);
at91_add_device_eth(&macb_data);
at91_add_device_i2c(pcontrol_g20_i2c_devices,
ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_wire1();
add_device_pcontrol();
at91_add_device_spi(pcontrol_g20_spi_devices,
ARRAY_SIZE(pcontrol_g20_spi_devices));
#include "generic.h"
-/*
- * Serial port configuration.
- * 0 .. 3 = USART0 .. USART3
- * 4 = DBGU
- */
-static struct at91_uart_config __initdata picotux200_uart_config = {
- .console_tty = 0, /* ttyS0 */
- .nr_tty = 2,
- .tty_map = { 4, 1, -1, -1, -1 } /* ttyS0, ..., ttyS4 */
-};
-
static void __init picotux200_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91rm9200_initialize(18432000, AT91RM9200_BGA);
- /* Setup the serial ports and console */
- at91_init_serial(&picotux200_uart_config);
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
}
static void __init picotux200_init_irq(void)
.ports = 1,
};
-// static struct at91_udc_data __initdata picotux200_udc_data = {
-// .vbus_pin = AT91_PIN_PD4,
-// .pullup_pin = AT91_PIN_PD5,
-// };
-
static struct at91_mmc_data __initdata picotux200_mmc_data = {
.det_pin = AT91_PIN_PB27,
.slot_b = 0,
.wp_pin = AT91_PIN_PA17,
};
-// static struct spi_board_info picotux200_spi_devices[] = {
-// { /* DataFlash chip */
-// .modalias = "mtd_dataflash",
-// .chip_select = 0,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
-// { /* DataFlash card */
-// .modalias = "mtd_dataflash",
-// .chip_select = 3,
-// .max_speed_hz = 15 * 1000 * 1000,
-// },
-// #endif
-// };
-
#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
#define PICOTUX200_FLASH_SIZE SZ_4M
at91_add_device_eth(&picotux200_eth_data);
/* USB Host */
at91_add_device_usbh(&picotux200_usbh_data);
- /* USB Device */
- // at91_add_device_udc(&picotux200_udc_data);
- // at91_set_multi_drive(picotux200_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
/* I2C */
at91_add_device_i2c(NULL, 0);
- /* SPI */
- // at91_add_device_spi(picotux200_spi_devices, ARRAY_SIZE(picotux200_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
/* MMC */
at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
at91_add_device_mmc(0, &picotux200_mmc_data);
-#endif
/* NOR Flash */
platform_device_register(&picotux200_flash);
}
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-rm9200dk.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init dk_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init dk_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata dk_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata dk_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata dk_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+static struct at91_cf_data __initdata dk_cf_data = {
+ .det_pin = AT91_PIN_PB0,
+ .rst_pin = AT91_PIN_PC5,
+ // .irq_pin = ... not connected
+ // .vcc_pin = ... always powered
+};
+
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
+static struct at91_mmc_data __initdata dk_mmc_data = {
+ .slot_b = 0,
+ .wire4 = 1,
+};
+#endif
+
+static struct spi_board_info dk_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+ { /* UR6HCPS2-SP40 PS2-to-SPI adapter */
+ .modalias = "ur6hcps2",
+ .chip_select = 1,
+ .max_speed_hz = 250 * 1000,
+ },
+ { /* TLV1504 ADC, 4 channels, 10 bits; one is a temp sensor */
+ .modalias = "tlv1504",
+ .chip_select = 2,
+ .max_speed_hz = 20 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ }
+#endif
+};
+
+static struct i2c_board_info __initdata dk_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("x9429", 0x28),
+ },
+ {
+ I2C_BOARD_INFO("24c1024", 0x50),
+ }
+};
+
+static struct mtd_partition __initdata dk_nand_partition[] = {
+ {
+ .name = "NAND Partition 1",
+ .offset = 0,
+ .size = MTDPART_SIZ_FULL,
+ },
+};
+
+static struct mtd_partition * __init nand_partitions(int size, int *num_partitions)
+{
+ *num_partitions = ARRAY_SIZE(dk_nand_partition);
+ return dk_nand_partition;
+}
+
+static struct atmel_nand_data __initdata dk_nand_data = {
+ .ale = 22,
+ .cle = 21,
+ .det_pin = AT91_PIN_PB1,
+ .rdy_pin = AT91_PIN_PC2,
+ // .enable_pin = ... not there
+ .partition_info = nand_partitions,
+};
+
+#define DK_FLASH_BASE AT91_CHIPSELECT_0
+#define DK_FLASH_SIZE SZ_2M
+
+static struct physmap_flash_data dk_flash_data = {
+ .width = 2,
+};
+
+static struct resource dk_flash_resource = {
+ .start = DK_FLASH_BASE,
+ .end = DK_FLASH_BASE + DK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device dk_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &dk_flash_data,
+ },
+ .resource = &dk_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_led dk_leds[] = {
+ {
+ .name = "led0",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ }
+};
+
+static void __init dk_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&dk_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&dk_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&dk_udc_data);
+ at91_set_multi_drive(dk_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* Compact Flash */
+ at91_add_device_cf(&dk_cf_data);
+ /* I2C */
+ at91_add_device_i2c(dk_i2c_devices, ARRAY_SIZE(dk_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(dk_spi_devices, ARRAY_SIZE(dk_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB7, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB7, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &dk_mmc_data);
+#endif
+ /* NAND */
+ at91_add_device_nand(&dk_nand_data);
+ /* NOR Flash */
+ platform_device_register(&dk_flash);
+ /* LEDs */
+ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds));
+ /* VGA */
+// dk_add_device_video();
+}
+
+MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK")
+ /* Maintainer: SAN People/Atmel */
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = dk_map_io,
+ .init_irq = dk_init_irq,
+ .init_machine = dk_board_init,
+MACHINE_END
--- /dev/null
+/*
+ * linux/arch/arm/mach-at91/board-rm9200ek.c
+ *
+ * Copyright (C) 2005 SAN People
+ *
+ * Epson S1D framebuffer glue code is:
+ * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/spi/spi.h>
+#include <linux/mtd/physmap.h>
+
+#include <asm/setup.h>
+#include <asm/mach-types.h>
+#include <asm/irq.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+#include <asm/mach/irq.h>
+
+#include <mach/hardware.h>
+#include <mach/board.h>
+#include <mach/gpio.h>
+#include <mach/at91rm9200_mc.h>
+
+#include "generic.h"
+
+
+static void __init ek_map_io(void)
+{
+ /* Initialize processor: 18.432 MHz crystal */
+ at91rm9200_initialize(18432000, AT91RM9200_BGA);
+
+ /* Setup the LEDs */
+ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2);
+
+ /* DBGU on ttyS0. (Rx & Tx only) */
+ at91_register_uart(0, 0, 0);
+
+ /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ | ATMEL_UART_RI);
+
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init ek_init_irq(void)
+{
+ at91rm9200_init_interrupts(NULL);
+}
+
+static struct at91_eth_data __initdata ek_eth_data = {
+ .phy_irq_pin = AT91_PIN_PC4,
+ .is_rmii = 1,
+};
+
+static struct at91_usbh_data __initdata ek_usbh_data = {
+ .ports = 2,
+};
+
+static struct at91_udc_data __initdata ek_udc_data = {
+ .vbus_pin = AT91_PIN_PD4,
+ .pullup_pin = AT91_PIN_PD5,
+};
+
+#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
+static struct at91_mmc_data __initdata ek_mmc_data = {
+ .det_pin = AT91_PIN_PB27,
+ .slot_b = 0,
+ .wire4 = 1,
+ .wp_pin = AT91_PIN_PA17,
+};
+#endif
+
+static struct spi_board_info ek_spi_devices[] = {
+ { /* DataFlash chip */
+ .modalias = "mtd_dataflash",
+ .chip_select = 0,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ { /* DataFlash card */
+ .modalias = "mtd_dataflash",
+ .chip_select = 3,
+ .max_speed_hz = 15 * 1000 * 1000,
+ },
+#endif
+};
+
+static struct i2c_board_info __initdata ek_i2c_devices[] = {
+ {
+ I2C_BOARD_INFO("ics1523", 0x26),
+ },
+ {
+ I2C_BOARD_INFO("dac3550", 0x4d),
+ }
+};
+
+#define EK_FLASH_BASE AT91_CHIPSELECT_0
+#define EK_FLASH_SIZE SZ_2M
+
+static struct physmap_flash_data ek_flash_data = {
+ .width = 2,
+};
+
+static struct resource ek_flash_resource = {
+ .start = EK_FLASH_BASE,
+ .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ek_flash = {
+ .name = "physmap-flash",
+ .id = 0,
+ .dev = {
+ .platform_data = &ek_flash_data,
+ },
+ .resource = &ek_flash_resource,
+ .num_resources = 1,
+};
+
+static struct gpio_led ek_leds[] = {
+ { /* "user led 1", DS2 */
+ .name = "green",
+ .gpio = AT91_PIN_PB0,
+ .active_low = 1,
+ .default_trigger = "mmc0",
+ },
+ { /* "user led 2", DS4 */
+ .name = "yellow",
+ .gpio = AT91_PIN_PB1,
+ .active_low = 1,
+ .default_trigger = "heartbeat",
+ },
+ { /* "user led 3", DS6 */
+ .name = "red",
+ .gpio = AT91_PIN_PB2,
+ .active_low = 1,
+ }
+};
+
+static void __init ek_board_init(void)
+{
+ /* Serial */
+ at91_add_device_serial();
+ /* Ethernet */
+ at91_add_device_eth(&ek_eth_data);
+ /* USB Host */
+ at91_add_device_usbh(&ek_usbh_data);
+ /* USB Device */
+ at91_add_device_udc(&ek_udc_data);
+ at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
+ /* I2C */
+ at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
+ /* SPI */
+ at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
+#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
+ /* DataFlash card */
+ at91_set_gpio_output(AT91_PIN_PB22, 0);
+#else
+ /* MMC */
+ at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+ at91_add_device_mmc(0, &ek_mmc_data);
+#endif
+ /* NOR Flash */
+ platform_device_register(&ek_flash);
+ /* LEDs */
+ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
+ /* VGA */
+// ek_add_device_video();
+}
+
+MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
+ /* Maintainer: SAN People/Atmel */
+ .boot_params = AT91_SDRAM_BASE + 0x100,
+ .timer = &at91rm9200_timer,
+ .map_io = ek_map_io,
+ .init_irq = ek_init_irq,
+ .init_machine = ek_board_init,
+MACHINE_END
#include "generic.h"
-static void __init portuxg20_map_io(void)
+void __init stamp9g20_map_io(void)
{
/* Initialize processor: 18.432 MHz crystal */
at91sam9260_initialize(18432000);
/* DGBU on ttyS0. (Rx & Tx only) */
at91_register_uart(0, 0, 0);
+ /* set serial console to ttyS0 (ie, DBGU) */
+ at91_set_serial_console(0);
+}
+
+static void __init stamp9g20evb_map_io(void)
+{
+ stamp9g20_map_io();
+
+ /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
+ at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ | ATMEL_UART_DTR | ATMEL_UART_DSR
+ | ATMEL_UART_DCD | ATMEL_UART_RI);
+}
+
+static void __init portuxg20_map_io(void)
+{
+ stamp9g20_map_io();
+
/* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
| ATMEL_UART_DTR | ATMEL_UART_DSR
/* USART5 on ttyS6. (Rx, Tx only) */
at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
-}
-
-static void __init stamp9g20_map_io(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91sam9260_initialize(18432000);
-
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* set serial console to ttyS0 (ie, DBGU) */
- at91_set_serial_console(0);
}
static void __init init_irq(void)
.pullup_pin = 0, /* pull-up driven by UDC */
};
-static struct at91_udc_data __initdata stamp9g20_udc_data = {
+static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
.vbus_pin = AT91_PIN_PA22,
.pullup_pin = 0, /* pull-up driven by UDC */
};
}
};
-static struct gpio_led stamp9g20_leds[] = {
+static struct gpio_led stamp9g20evb_leds[] = {
{
.name = "D8",
.gpio = AT91_PIN_PB18,
}
-static void __init generic_board_init(void)
+void __init stamp9g20_board_init(void)
{
/* Serial */
at91_add_device_serial();
#else
at91_add_device_mmc(0, &mmc_data);
#endif
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
/* W1 */
add_w1();
}
static void __init portuxg20_board_init(void)
{
- generic_board_init();
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
at91_add_device_udc(&portuxg20_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
+ /* SPI */
+ at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
/* LEDs */
at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
}
-static void __init stamp9g20_board_init(void)
+static void __init stamp9g20evb_board_init(void)
{
- generic_board_init();
+ stamp9g20_board_init();
+ /* USB Host */
+ at91_add_device_usbh(&usbh_data);
/* USB Device */
- at91_add_device_udc(&stamp9g20_udc_data);
+ at91_add_device_udc(&stamp9g20evb_udc_data);
+ /* Ethernet */
+ at91_add_device_eth(&macb_data);
+ /* I2C */
+ at91_add_device_i2c(NULL, 0);
/* LEDs */
- at91_gpio_leds(stamp9g20_leds, ARRAY_SIZE(stamp9g20_leds));
+ at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
}
MACHINE_START(PORTUXG20, "taskit PortuxG20")
/* Maintainer: taskit GmbH */
.boot_params = AT91_SDRAM_BASE + 0x100,
.timer = &at91sam926x_timer,
- .map_io = stamp9g20_map_io,
+ .map_io = stamp9g20evb_map_io,
.init_irq = init_irq,
- .init_machine = stamp9g20_board_init,
+ .init_machine = stamp9g20evb_board_init,
MACHINE_END
* EPSON S1D13806 FB (discontinued chip)
* EPSON S1D13506 FB
*/
-#if defined(CONFIG_FB_S1D135XX) || defined(CONFIG_FB_S1D13XXX_MODULE)
+#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
#include <video/s1d13xxxfb.h>
/* Now set uhpck values */
uhpck.parent = &utmi_clk;
uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = utmi_clk.parent->rate_hz;
+ uhpck.rate_hz = utmi_clk.rate_hz;
uhpck.rate_hz /= 1 + ((at91_sys_read(AT91_PMC_USB) & AT91_PMC_OHCIUSBDIV) >> 8);
}
extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
extern void __init at91_set_serial_console(unsigned portnr);
-struct at91_uart_config {
- unsigned short console_tty; /* tty number of serial console */
- unsigned short nr_tty; /* number of serial tty's */
- short tty_map[]; /* map UART to tty number */
-};
extern struct platform_device *atmel_default_console_device;
-extern void __init __deprecated at91_init_serial(struct at91_uart_config *config);
struct atmel_uart_data {
short use_dma_tx; /* use transmit DMA? */
--- /dev/null
+#ifndef __MACH_STAMP9G20_H
+#define __MACH_STAMP9G20_H
+
+void stamp9g20_map_io(void);
+void stamp9g20_board_init(void);
+
+#endif
{
int i;
- hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS,
+ hook_fault_code(16 + 6, cns3xxx_pcie_abort_handler, SIGBUS, 0,
"imprecise external abort");
for (i = 0; i < ARRAY_SIZE(cns3xxx_pcie); i++) {
static APBC_CLK(twsi4, MMP2_TWSI4, 0, 26000000);
static APBC_CLK(twsi5, MMP2_TWSI5, 0, 26000000);
static APBC_CLK(twsi6, MMP2_TWSI6, 0, 26000000);
-static APBC_CLK(rtc, MMP2_RTC, 0, 32768);
static APMU_CLK(nand, NAND, 0xbf, 100000000);
{
.name = "wl1271",
.mmc = 3,
- .caps = MMC_CAP_4_BIT_DATA,
+ .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_POWER_OFF_CARD,
.gpio_wp = -EINVAL,
.gpio_cd = -EINVAL,
.nonremovable = true,
return 0;
dpll3_m2_ck = clk_get(NULL, "dpll3_m2_ck");
- if (!dpll3_m2_ck)
+ if (IS_ERR(dpll3_m2_ck))
return -EINVAL;
rate = clk_get_rate(dpll3_m2_ck);
printk(KERN_INFO "%-20s: 0x%08x\n", regs[i].name, regs[i].val);
}
+void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
+{
+ u32 tick_rate, cycles;
+
+ if (!seconds && !milliseconds)
+ return;
+
+ tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
+ cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
+ omap_dm_timer_stop(gptimer_wakeup);
+ omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
+
+ pr_info("PM: Resume timer in %u.%03u secs"
+ " (%d ticks at %d ticks/sec.)\n",
+ seconds, milliseconds, cycles, tick_rate);
+}
+
#ifdef CONFIG_DEBUG_FS
#include <linux/debugfs.h>
#include <linux/seq_file.h>
pwrdm->timer = t;
}
-void omap2_pm_wakeup_on_timer(u32 seconds, u32 milliseconds)
-{
- u32 tick_rate, cycles;
-
- if (!seconds && !milliseconds)
- return;
-
- tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer_wakeup));
- cycles = tick_rate * seconds + tick_rate * milliseconds / 1000;
- omap_dm_timer_stop(gptimer_wakeup);
- omap_dm_timer_set_load_start(gptimer_wakeup, 0, 0xffffffff - cycles);
-
- pr_info("PM: Resume timer in %u.%03u secs"
- " (%d ticks at %d ticks/sec.)\n",
- seconds, milliseconds, cycles, tick_rate);
-}
-
static int clkdm_dbg_show_counter(struct clockdomain *clkdm, void *user)
{
struct seq_file *s = (struct seq_file *)user;
#include <linux/irq.h>
#include <linux/time.h>
#include <linux/gpio.h>
+#include <linux/console.h>
#include <asm/mach/time.h>
#include <asm/mach/irq.h>
#include <plat/powerdomain.h>
#include <plat/clockdomain.h>
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
static void (*omap2_sram_idle)(void);
static void (*omap2_sram_suspend)(u32 dllctrl, void __iomem *sdrc_dlla_ctrl,
void __iomem *sdrc_power);
if (omap_irq_pending())
goto no_sleep;
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (try_acquire_console_sem())
+ goto no_sleep;
+
omap_uart_prepare_idle(0);
omap_uart_prepare_idle(1);
omap_uart_prepare_idle(2);
omap_uart_resume_idle(1);
omap_uart_resume_idle(0);
+ if (!is_suspending())
+ release_console_sem();
+
no_sleep:
if (omap2_pm_debug) {
unsigned long long tmp;
local_irq_enable();
}
+static int omap2_pm_begin(suspend_state_t state)
+{
+ suspend_state = state;
+ return 0;
+}
+
static int omap2_pm_prepare(void)
{
/* We cannot sleep in idle until we have resumed */
enable_hlt();
}
+static void omap2_pm_end(void)
+{
+ suspend_state = PM_SUSPEND_ON;
+}
+
static struct platform_suspend_ops omap_pm_ops = {
+ .begin = omap2_pm_begin,
.prepare = omap2_pm_prepare,
.enter = omap2_pm_enter,
.finish = omap2_pm_finish,
+ .end = omap2_pm_end,
.valid = suspend_valid_only_mem,
};
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/slab.h>
+#include <linux/console.h>
#include <plat/sram.h>
#include <plat/clockdomain.h>
#include "sdrc.h"
#include "control.h"
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state = PM_SUSPEND_ON;
+static inline bool is_suspending(void)
+{
+ return (suspend_state != PM_SUSPEND_ON);
+}
+#else
+static inline bool is_suspending(void)
+{
+ return false;
+}
+#endif
+
/* Scratchpad offsets */
#define OMAP343X_TABLE_ADDRESS_OFFSET 0xc4
#define OMAP343X_TABLE_VALUE_OFFSET 0xc0
omap3_enable_io_chain();
}
+ /* Block console output in case it is on one of the OMAP UARTs */
+ if (!is_suspending())
+ if (per_next_state < PWRDM_POWER_ON ||
+ core_next_state < PWRDM_POWER_ON)
+ if (try_acquire_console_sem())
+ goto console_still_active;
+
/* PER */
if (per_next_state < PWRDM_POWER_ON) {
omap_uart_prepare_idle(2);
omap_uart_resume_idle(3);
}
+ if (!is_suspending())
+ release_console_sem();
+
+console_still_active:
/* Disable IO-PAD and IO-CHAIN wakeup */
if (omap3_has_io_wakeup() &&
(per_next_state < PWRDM_POWER_ON ||
}
#ifdef CONFIG_SUSPEND
-static suspend_state_t suspend_state;
-
static int omap3_pm_prepare(void)
{
disable_hlt();
#define OMAP24XX_EN_GPT1_MASK (1 << 0)
/* PM_WKST_WKUP, CM_IDLEST_WKUP shared bits */
-#define OMAP24XX_ST_GPIOS_SHIFT (1 << 2)
-#define OMAP24XX_ST_GPIOS_MASK 2
-#define OMAP24XX_ST_GPT1_SHIFT (1 << 0)
-#define OMAP24XX_ST_GPT1_MASK 0
+#define OMAP24XX_ST_GPIOS_SHIFT 2
+#define OMAP24XX_ST_GPIOS_MASK (1 << 2)
+#define OMAP24XX_ST_GPT1_SHIFT 0
+#define OMAP24XX_ST_GPT1_MASK (1 << 0)
/* CM_IDLEST_MDM and PM_WKST_MDM shared bits */
-#define OMAP2430_ST_MDM_SHIFT (1 << 0)
+#define OMAP2430_ST_MDM_SHIFT 0
+#define OMAP2430_ST_MDM_MASK (1 << 0)
/* 3430 register bits shared between CM & PRM registers */
#include <linux/slab.h>
#include <linux/serial_8250.h>
#include <linux/pm_runtime.h>
+#include <linux/console.h>
#ifdef CONFIG_SERIAL_OMAP
#include <plat/omap-serial.h>
struct omap_uart_state *uart;
list_for_each_entry(uart, &uart_list, node) {
- if (num == uart->num) {
+ if (num == uart->num && uart->can_sleep) {
omap_uart_enable_clocks(uart);
/* Check for IO pad wakeup */
oh->dev_attr = uart;
+ acquire_console_sem(); /* in case the earlycon is on the UART */
+
/*
* Because of early UART probing, UART did not get idled
* on init. Now that omap_device is ready, ensure full idle
omap_uart_block_sleep(uart);
uart->timeout = DEFAULT_TIMEOUT;
+ release_console_sem();
+
if ((cpu_is_omap34xx() && uart->padconf) ||
(uart->wk_en && uart->wk_mask)) {
device_init_wakeup(&od->pdev.dev, true);
/******************************************************************************
* NAND Flash
******************************************************************************/
-#if defined(CONFIG_MTD_NAND_GPIO) || defined(CONFIG_MTD_NAND_GPIO_MODULE)
+#if defined(CONFIG_MTD_NAND_PLATFORM) || \
+ defined(CONFIG_MTD_NAND_PLATFORM_MODULE)
static void palmtx_nand_cmd_ctl(struct mtd_info *mtd, int cmd,
unsigned int ctrl)
{
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
config CPU_S3C2412_ONLY
bool
depends on ARCH_S3C2410 && !CPU_S3C2400 && !CPU_S3C2410 && \
- !CPU_2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
+ !CPU_S3C2416 && !CPU_S3C2440 && !CPU_S3C2442 && \
!CPU_S3C2443 && CPU_S3C2412
default y if CPU_S3C2412
config MACH_SMDK2416
bool "SMDK2416"
select CPU_S3C2416
+ select MACH_SMDK
select S3C_DEV_FB
select S3C_DEV_HSMMC
select S3C_DEV_HSMMC1
+ select S3C_DEV_NAND
+ select S3C_DEV_USB_HOST
select S3C2416_PM if PM
help
Say Y here if you are using an SMDK2416
config CPU_S3C2442
bool
select CPU_ARM920T
+ select S3C_GPIO_PULL_DOWN
select S3C2410_CLOCK
select S3C2410_GPIO
select S3C2410_PM if PM
bool "MINI2440 development board"
select CPU_S3C2440
select EEPROM_AT24
+ select NEW_LEDS
+ select LEDS_CLASS
+ select LEDS_TRIGGER
select LEDS_TRIGGER_BACKLIGHT
select S3C_DEV_NAND
select S3C_DEV_USB_HOST
{
printk("S3C2440: Initialising architecture\n");
- s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
- s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
-
/* change irq for watchdog */
s3c_device_wdt.resource[1].start = IRQ_S3C2440_WDT;
return sysdev_register(&s3c2440_sysdev);
}
+
+void __init s3c2440_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up;
+}
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mutex.h>
+#include <linux/gpio.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <plat/clock.h>
#include <plat/cpu.h>
+#include <plat/s3c244x.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
/* S3C2442 extended clock support */
return sysdev_register(&s3c2442_sysdev);
}
+
+void __init s3c2442_map_io(void)
+{
+ s3c244x_map_io();
+
+ s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down;
+ s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down;
+}
config CPU_S3C2443
bool
depends on ARCH_S3C2410
+ select CPU_ARM920T
select S3C2443_DMA if S3C2410_DMA
select CPU_LLSERIAL_S3C2440
select SAMSUNG_CLKSRC
#include <mach/io.h>
.macro addruart, rp, rv
- ldreq \rp, =IO_APB_PHYS @ physical
- ldrne \rv, =IO_APB_VIRT @ virtual
+ ldr \rp, =IO_APB_PHYS @ physical
+ ldr \rv, =IO_APB_VIRT @ virtual
#if defined(CONFIG_TEGRA_DEBUG_UART_NONE)
#error "A debug UART must be selected in the kernel config to use DEBUG_LL"
#elif defined(CONFIG_TEGRA_DEBUG_UARTA)
*/
b secondary_startup
+ .align
1: .long .
.long pen_release
* - end - virtual end address of region
*/
v6_dma_inv_range:
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
+#endif
tst r0, #D_CACHE_LINE_SIZE - 1
bic r0, r0, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r0, c7, c11, 1 @ clean unified line
#endif
tst r1, #D_CACHE_LINE_SIZE - 1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrneb r2, [r1, #-1] @ read for ownership
+ strneb r2, [r1, #-1] @ write for ownership
+#endif
bic r1, r1, #D_CACHE_LINE_SIZE - 1
#ifdef HARVARD_CACHE
mcrne p15, 0, r1, c7, c14, 1 @ clean & invalidate D line
mcrne p15, 0, r1, c7, c15, 1 @ clean & invalidate unified line
#endif
1:
-#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
-#endif
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c6, 1 @ invalidate D line
#else
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlo r2, [r0] @ read for ownership
+ strlo r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
* - end - virtual end address of region
*/
ENTRY(v6_dma_flush_range)
- bic r0, r0, #D_CACHE_LINE_SIZE - 1
-1:
#ifdef CONFIG_DMA_CACHE_RWFO
- ldr r2, [r0] @ read for ownership
- str r2, [r0] @ write for ownership
+ ldrb r2, [r0] @ read for ownership
+ strb r2, [r0] @ write for ownership
#endif
+ bic r0, r0, #D_CACHE_LINE_SIZE - 1
+1:
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line
#else
#endif
add r0, r0, #D_CACHE_LINE_SIZE
cmp r0, r1
+#ifdef CONFIG_DMA_CACHE_RWFO
+ ldrlob r2, [r0] @ read for ownership
+ strlob r2, [r0] @ write for ownership
+#endif
blo 1b
mov r0, #0
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
UNWIND(.fnstart )
dcache_line_size r2, r3
sub r3, r2, #1
- bic r0, r0, r3
+ bic r12, r0, r3
1:
- USER( mcr p15, 0, r0, c7, c11, 1 ) @ clean D line to the point of unification
+ USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification
+ add r12, r12, r2
+ cmp r12, r1
+ blo 1b
dsb
- USER( mcr p15, 0, r0, c7, c5, 1 ) @ invalidate I line
- add r0, r0, r2
+ icache_line_size r2, r3
+ sub r3, r2, #1
+ bic r12, r0, r3
2:
- cmp r0, r1
- blo 1b
+ USER( mcr p15, 0, r12, c7, c5, 1 ) @ invalidate I line
+ add r12, r12, r2
+ cmp r12, r1
+ blo 2b
+3:
mov r0, #0
ALT_SMP(mcr p15, 0, r0, c7, c1, 6) @ invalidate BTB Inner Shareable
ALT_UP(mcr p15, 0, r0, c7, c5, 6) @ invalidate BTB
* isn't mapped, just try the next page.
*/
9001:
- mov r0, r0, lsr #12
- mov r0, r0, lsl #12
- add r0, r0, #4096
- b 2b
+ mov r12, r12, lsr #12
+ mov r12, r12, lsl #12
+ add r12, r12, #4096
+ b 3b
UNWIND(.fnend )
ENDPROC(v7_coherent_kern_range)
ENDPROC(v7_coherent_user_range)
.endm
/*
- * cache_line_size - get the cache line size from the CSIDR register
- * (available on ARMv7+). It assumes that the CSSR register was configured
- * to access the L1 data cache CSIDR.
+ * dcache_line_size - get the minimum D-cache line size from the CTR register
+ * on ARMv7.
*/
.macro dcache_line_size, reg, tmp
- mrc p15, 1, \tmp, c0, c0, 0 @ read CSIDR
- and \tmp, \tmp, #7 @ cache line size encoding
- mov \reg, #16 @ size offset
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ lsr \tmp, \tmp, #16
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
mov \reg, \reg, lsl \tmp @ actual cache line size
.endm
+/*
+ * icache_line_size - get the minimum I-cache line size from the CTR register
+ * on ARMv7.
+ */
+ .macro icache_line_size, reg, tmp
+ mrc p15, 0, \tmp, c0, c0, 1 @ read ctr
+ and \tmp, \tmp, #0xf @ cache line size encoding
+ mov \reg, #4 @ bytes per word
+ mov \reg, \reg, lsl \tmp @ actual cache line size
+ .endm
/*
* Sanity check the PTE configuration for the code below - which makes
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_ca9mp_setup
+ W(b) __v7_ca9mp_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
PMD_SECT_XN | \
PMD_SECT_AP_WRITE | \
PMD_SECT_AP_READ
- b __v7_setup
+ W(b) __v7_setup
.long cpu_arch_name
.long cpu_elf_name
.long HWCAP_SWP|HWCAP_HALF|HWCAP_THUMB|HWCAP_FAST_MULT|HWCAP_EDSP|HWCAP_TLS
#include <linux/time.h>
#include <linux/init.h>
#include <linux/timex.h>
+#include <linux/sched.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/clockchips.h>
/*
* IOP clocksource (free-running timer 1).
*/
-static cycle_t iop_clocksource_read(struct clocksource *unused)
+static cycle_t notrace iop_clocksource_read(struct clocksource *unused)
{
return 0xffffffffu - read_tcr1();
}
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/io.h>
+#include <linux/err.h>
#include <plat/common.h>
#include <plat/board.h>
return -ENODEV;
sync_32k_ick = clk_get(NULL, "omap_32ksync_ick");
- if (sync_32k_ick)
+ if (!IS_ERR(sync_32k_ick))
clk_enable(sync_32k_ick);
clocksource_32k.mult = clocksource_hz2mult(32768,
cpu_is_omap1710())
omap_sram_size = 0x4000; /* 16K */
else if (cpu_is_omap1611())
- omap_sram_size = 0x3e800; /* 250K */
+ omap_sram_size = SZ_256K;
else {
printk(KERN_ERR "Could not detect SRAM size\n");
omap_sram_size = 0x4000;
{
.idcode = 0x32440000,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
{
.idcode = 0x32440001,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2440_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2440_init,
{
.idcode = 0x32440aaa,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
{
.idcode = 0x32440aab,
.idmask = 0xffffffff,
- .map_io = s3c244x_map_io,
+ .map_io = s3c2442_map_io,
.init_clocks = s3c244x_init_clocks,
.init_uarts = s3c244x_init_uarts,
.init = s3c2442_init,
struct s3c_gpio_cfg s3c24xx_gpiocfg_default = {
.set_config = s3c_gpio_setcfg_s3c24xx,
.get_config = s3c_gpio_getcfg_s3c24xx,
- .set_pull = s3c_gpio_setpull_1up,
- .get_pull = s3c_gpio_getpull_1up,
};
struct s3c_gpio_chip s3c24xx_gpios[] = {
#else
#define s3c244x_init_clocks NULL
#define s3c244x_init_uarts NULL
-#define s3c244x_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_init(void);
+
+extern void s3c2440_map_io(void);
#else
#define s3c2440_init NULL
+#define s3c2440_map_io NULL
#endif
#ifdef CONFIG_CPU_S3C2442
extern int s3c2442_init(void);
+
+extern void s3c2442_map_io(void);
#else
#define s3c2442_init NULL
+#define s3c2442_map_io NULL
#endif
}
#endif
-#ifdef CONFIG_S3C_GPIO_PULL_UP
-int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off, s3c_gpio_pull_t pull)
+#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN)
+static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull,
+ s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
- pup = __raw_readl(reg);
-
- if (pup == S3C_GPIO_PULL_UP)
+ if (pull == updown)
pup &= ~(1 << off);
- else if (pup == S3C_GPIO_PULL_NONE)
+ else if (pull == S3C_GPIO_PULL_NONE)
pup |= (1 << off);
else
return -EINVAL;
return 0;
}
-s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
- unsigned int off)
+static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t updown)
{
void __iomem *reg = chip->base + 0x08;
u32 pup = __raw_readl(reg);
pup &= (1 << off);
- return pup ? S3C_GPIO_PULL_NONE : S3C_GPIO_PULL_UP;
+ return pup ? S3C_GPIO_PULL_NONE : updown;
+}
+#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */
+
+#ifdef CONFIG_S3C_GPIO_PULL_UP
+s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP);
+}
+
+int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP);
}
#endif /* CONFIG_S3C_GPIO_PULL_UP */
+#ifdef CONFIG_S3C_GPIO_PULL_DOWN
+s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off)
+{
+ return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN);
+}
+
+int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off, s3c_gpio_pull_t pull)
+{
+ return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN);
+}
+#endif /* CONFIG_S3C_GPIO_PULL_DOWN */
+
#ifdef CONFIG_S5P_GPIO_DRVSTR
s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin)
{
extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip,
unsigned int off);
+/**
+ * s3c_gpio_getpull_1down() - Get configuration for choice of down or none
+ * @chip: The gpio chip that the GPIO pin belongs to
+ * @off: The offset to the pin to get the configuration of.
+ *
+ * This helper function reads the state of the pull-down resistor for the
+ * given GPIO in the same case as s3c_gpio_setpull_1down.
+*/
+extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip,
+ unsigned int off);
+
/**
* s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443.
* @chip: The gpio chip that is being configured.
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Thu Sep 9 22:43:01 2010
+# Last update: Sun Dec 12 23:24:27 2010
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
u380 MACH_U380 U380 2333
oamp3_hualu MACH_HUALU_BOARD HUALU_BOARD 2334
npcmx50 MACH_NPCMX50 NPCMX50 2335
-mx51_lange51 MACH_MX51_LANGE51 MX51_LANGE51 2336
+mx51_efikamx MACH_MX51_EFIKAMX MX51_EFIKAMX 2336
mx51_lange52 MACH_MX51_LANGE52 MX51_LANGE52 2337
riom MACH_RIOM RIOM 2338
comcas MACH_COMCAS COMCAS 2339
csb732 MACH_CSB732 CSB732 2367
u8500 MACH_U8500 U8500 2368
huqiu MACH_HUQIU HUQIU 2369
-mx51_kunlun MACH_MX51_KUNLUN MX51_KUNLUN 2370
+mx51_efikasb MACH_MX51_EFIKASB MX51_EFIKASB 2370
pmt1g MACH_PMT1G PMT1G 2371
htcelf MACH_HTCELF HTCELF 2372
armadillo420 MACH_ARMADILLO420 ARMADILLO420 2373
wasabi MACH_WASABI WASABI 2986
vivow MACH_VIVOW VIVOW 2987
mx50_rdp MACH_MX50_RDP MX50_RDP 2988
-universal MACH_UNIVERSAL UNIVERSAL 2989
+universal_c210 MACH_UNIVERSAL_C210 UNIVERSAL_C210 2989
real6410 MACH_REAL6410 REAL6410 2990
spx_sakura MACH_SPX_SAKURA SPX_SAKURA 2991
ij3k_2440 MACH_IJ3K_2440 IJ3K_2440 2992
msm8x60_qrdc MACH_MSM8X60_QRDC MSM8X60_QRDC 3060
spear900 MACH_SPEAR900 SPEAR900 3061
pcontrol_g20 MACH_PCONTROL_G20 PCONTROL_G20 3062
+rdstor MACH_RDSTOR RDSTOR 3063
+usdloader MACH_USDLOADER USDLOADER 3064
+tsoploader MACH_TSOPLOADER TSOPLOADER 3065
+kronos MACH_KRONOS KRONOS 3066
+ffcore MACH_FFCORE FFCORE 3067
+mone MACH_MONE MONE 3068
+unit2s MACH_UNIT2S UNIT2S 3069
+acer_a5 MACH_ACER_A5 ACER_A5 3070
+etherpro_isp MACH_ETHERPRO_ISP ETHERPRO_ISP 3071
+stretchs7000 MACH_STRETCHS7000 STRETCHS7000 3072
+p87_smartsim MACH_P87_SMARTSIM P87_SMARTSIM 3073
+tulip MACH_TULIP TULIP 3074
+sunflower MACH_SUNFLOWER SUNFLOWER 3075
+rib MACH_RIB RIB 3076
+clod MACH_CLOD CLOD 3077
+rump MACH_RUMP RUMP 3078
+tenderloin MACH_TENDERLOIN TENDERLOIN 3079
+shortloin MACH_SHORTLOIN SHORTLOIN 3080
+crespo MACH_CRESPO CRESPO 3081
+antares MACH_ANTARES ANTARES 3082
+wb40n MACH_WB40N WB40N 3083
+herring MACH_HERRING HERRING 3084
+naxy400 MACH_NAXY400 NAXY400 3085
+naxy1200 MACH_NAXY1200 NAXY1200 3086
+vpr200 MACH_VPR200 VPR200 3087
+bug20 MACH_BUG20 BUG20 3088
+goflexnet MACH_GOFLEXNET GOFLEXNET 3089
+torbreck MACH_TORBRECK TORBRECK 3090
+saarb_mg1 MACH_SAARB_MG1 SAARB_MG1 3091
+callisto MACH_CALLISTO CALLISTO 3092
+multhsu MACH_MULTHSU MULTHSU 3093
+saluda MACH_SALUDA SALUDA 3094
+pemp_omap3_apollo MACH_PEMP_OMAP3_APOLLO PEMP_OMAP3_APOLLO 3095
+vc0718 MACH_VC0718 VC0718 3096
+mvblx MACH_MVBLX MVBLX 3097
+inhand_apeiron MACH_INHAND_APEIRON INHAND_APEIRON 3098
+inhand_fury MACH_INHAND_FURY INHAND_FURY 3099
+inhand_siren MACH_INHAND_SIREN INHAND_SIREN 3100
+hdnvp MACH_HDNVP HDNVP 3101
+softwinner MACH_SOFTWINNER SOFTWINNER 3102
+prima2_evb MACH_PRIMA2_EVB PRIMA2_EVB 3103
+nas6210 MACH_NAS6210 NAS6210 3104
+unisdev MACH_UNISDEV UNISDEV 3105
+sbca11 MACH_SBCA11 SBCA11 3106
+saga MACH_SAGA SAGA 3107
+ns_k330 MACH_NS_K330 NS_K330 3108
+tanna MACH_TANNA TANNA 3109
+imate8502 MACH_IMATE8502 IMATE8502 3110
+aspen MACH_ASPEN ASPEN 3111
+daintree_cwac MACH_DAINTREE_CWAC DAINTREE_CWAC 3112
+zmx25 MACH_ZMX25 ZMX25 3113
+maple1 MACH_MAPLE1 MAPLE1 3114
+qsd8x72_surf MACH_QSD8X72_SURF QSD8X72_SURF 3115
+qsd8x72_ffa MACH_QSD8X72_FFA QSD8X72_FFA 3116
+abilene MACH_ABILENE ABILENE 3117
+eigen_ttr MACH_EIGEN_TTR EIGEN_TTR 3118
+iomega_ix2_200 MACH_IOMEGA_IX2_200 IOMEGA_IX2_200 3119
+coretec_vcx7400 MACH_CORETEC_VCX7400 CORETEC_VCX7400 3120
+santiago MACH_SANTIAGO SANTIAGO 3121
+mx257sol MACH_MX257SOL MX257SOL 3122
+strasbourg MACH_STRASBOURG STRASBOURG 3123
+msm8x60_fluid MACH_MSM8X60_FLUID MSM8X60_FLUID 3124
+smartqv5 MACH_SMARTQV5 SMARTQV5 3125
+smartqv3 MACH_SMARTQV3 SMARTQV3 3126
+smartqv7 MACH_SMARTQV7 SMARTQV7 3127
+paz00 MACH_PAZ00 PAZ00 3128
+acmenetusfoxg20 MACH_ACMENETUSFOXG20 ACMENETUSFOXG20 3129
+htcwillow MACH_HTCWILLOW HTCWILLOW 3130
+fwbd_0404 MACH_FWBD_0404 FWBD_0404 3131
+hdgu MACH_HDGU HDGU 3132
+pyramid MACH_PYRAMID PYRAMID 3133
+epiphan MACH_EPIPHAN EPIPHAN 3134
+omap_bender MACH_OMAP_BENDER OMAP_BENDER 3135
+gurnard MACH_GURNARD GURNARD 3136
+gtl_it5100 MACH_GTL_IT5100 GTL_IT5100 3137
+bcm2708 MACH_BCM2708 BCM2708 3138
+mx51_ggc MACH_MX51_GGC MX51_GGC 3139
+sharespace MACH_SHARESPACE SHARESPACE 3140
+haba_knx_explorer MACH_HABA_KNX_EXPLORER HABA_KNX_EXPLORER 3141
+simtec_kirkmod MACH_SIMTEC_KIRKMOD SIMTEC_KIRKMOD 3142
+crux MACH_CRUX CRUX 3143
+mx51_bravo MACH_MX51_BRAVO MX51_BRAVO 3144
+charon MACH_CHARON CHARON 3145
+picocom3 MACH_PICOCOM3 PICOCOM3 3146
+picocom4 MACH_PICOCOM4 PICOCOM4 3147
+serrano MACH_SERRANO SERRANO 3148
+doubleshot MACH_DOUBLESHOT DOUBLESHOT 3149
+evsy MACH_EVSY EVSY 3150
+huashan MACH_HUASHAN HUASHAN 3151
+lausanne MACH_LAUSANNE LAUSANNE 3152
+emerald MACH_EMERALD EMERALD 3153
+tqma35 MACH_TQMA35 TQMA35 3154
+marvel MACH_MARVEL MARVEL 3155
+manuae MACH_MANUAE MANUAE 3156
+chacha MACH_CHACHA CHACHA 3157
+lemon MACH_LEMON LEMON 3158
+csc MACH_CSC CSC 3159
+gira_knxip_router MACH_GIRA_KNXIP_ROUTER GIRA_KNXIP_ROUTER 3160
+t20 MACH_T20 T20 3161
+hdmini MACH_HDMINI HDMINI 3162
+sciphone_g2 MACH_SCIPHONE_G2 SCIPHONE_G2 3163
+express MACH_EXPRESS EXPRESS 3164
+express_kt MACH_EXPRESS_KT EXPRESS_KT 3165
+maximasp MACH_MAXIMASP MAXIMASP 3166
+nitrogen_imx51 MACH_NITROGEN_IMX51 NITROGEN_IMX51 3167
+nitrogen_imx53 MACH_NITROGEN_IMX53 NITROGEN_IMX53 3168
+sunfire MACH_SUNFIRE SUNFIRE 3169
+arowana MACH_AROWANA AROWANA 3170
+tegra_daytona MACH_TEGRA_DAYTONA TEGRA_DAYTONA 3171
+tegra_swordfish MACH_TEGRA_SWORDFISH TEGRA_SWORDFISH 3172
+edison MACH_EDISON EDISON 3173
+svp8500v1 MACH_SVP8500V1 SVP8500V1 3174
+svp8500v2 MACH_SVP8500V2 SVP8500V2 3175
+svp5500 MACH_SVP5500 SVP5500 3176
+b5500 MACH_B5500 B5500 3177
+s5500 MACH_S5500 S5500 3178
+icon MACH_ICON ICON 3179
+elephant MACH_ELEPHANT ELEPHANT 3180
+msm8x60_fusion MACH_MSM8X60_FUSION MSM8X60_FUSION 3181
+shooter MACH_SHOOTER SHOOTER 3182
+spade_lte MACH_SPADE_LTE SPADE_LTE 3183
+philhwani MACH_PHILHWANI PHILHWANI 3184
+gsncomm MACH_GSNCOMM GSNCOMM 3185
+strasbourg_a2 MACH_STRASBOURG_A2 STRASBOURG_A2 3186
+mmm MACH_MMM MMM 3187
+davinci_dm365_bv MACH_DAVINCI_DM365_BV DAVINCI_DM365_BV 3188
+ag5evm MACH_AG5EVM AG5EVM 3189
+sc575plc MACH_SC575PLC SC575PLC 3190
+sc575hmi MACH_SC575IPC SC575IPC 3191
+omap3_tdm3730 MACH_OMAP3_TDM3730 OMAP3_TDM3730 3192
+g7 MACH_G7 G7 3193
+top9000_eval MACH_TOP9000_EVAL TOP9000_EVAL 3194
+top9000_su MACH_TOP9000_SU TOP9000_SU 3195
+utm300 MACH_UTM300 UTM300 3196
+tsunagi MACH_TSUNAGI TSUNAGI 3197
+ts75xx MACH_TS75XX TS75XX 3198
+msm8x60_fusn_ffa MACH_MSM8X60_FUSN_FFA MSM8X60_FUSN_FFA 3199
+ts47xx MACH_TS47XX TS47XX 3200
+da850_k5 MACH_DA850_K5 DA850_K5 3201
+ax502 MACH_AX502 AX502 3202
+igep0032 MACH_IGEP0032 IGEP0032 3203
+antero MACH_ANTERO ANTERO 3204
+synergy MACH_SYNERGY SYNERGY 3205
+ics_if_voip MACH_ICS_IF_VOIP ICS_IF_VOIP 3206
+wlf_cragg_6410 MACH_WLF_CRAGG_6410 WLF_CRAGG_6410 3207
+punica MACH_PUNICA PUNICA 3208
+sbc_nt250 MACH_SBC_NT250 SBC_NT250 3209
+mx27_wmultra MACH_MX27_WMULTRA MX27_WMULTRA 3210
+mackerel MACH_MACKEREL MACKEREL 3211
+fa9x27 MACH_FA9X27 FA9X27 3213
+ns2816tb MACH_NS2816TB NS2816TB 3214
+ns2816_ntpad MACH_NS2816_NTPAD NS2816_NTPAD 3215
+ns2816_ntnb MACH_NS2816_NTNB NS2816_NTNB 3216
+kaen MACH_KAEN KAEN 3217
+nv1000 MACH_NV1000 NV1000 3218
+nuc950ts MACH_NUC950TS NUC950TS 3219
+nokia_rm680 MACH_NOKIA_RM680 NOKIA_RM680 3220
+ast2200 MACH_AST2200 AST2200 3221
+lead MACH_LEAD LEAD 3222
+unino1 MACH_UNINO1 UNINO1 3223
+greeco MACH_GREECO GREECO 3224
+verdi MACH_VERDI VERDI 3225
+dm6446_adbox MACH_DM6446_ADBOX DM6446_ADBOX 3226
+quad_salsa MACH_QUAD_SALSA QUAD_SALSA 3227
+abb_gma_1_1 MACH_ABB_GMA_1_1 ABB_GMA_1_1 3228
+svcid MACH_SVCID SVCID 3229
+msm8960_sim MACH_MSM8960_SIM MSM8960_SIM 3230
+msm8960_rumi3 MACH_MSM8960_RUMI3 MSM8960_RUMI3 3231
+icon_g MACH_ICON_G ICON_G 3232
+mb3 MACH_MB3 MB3 3233
+gsia18s MACH_GSIA18S GSIA18S 3234
+pivicc MACH_PIVICC PIVICC 3235
+pcm048 MACH_PCM048 PCM048 3236
+dds MACH_DDS DDS 3237
+chalten_xa1 MACH_CHALTEN_XA1 CHALTEN_XA1 3238
mov pc, lr
ENDPROC(vfp_save_state)
+ .align
last_VFP_context_address:
.word last_VFP_context
select GENERIC_ATOMIC64 if !64BIT
select HAVE_DMA_ATTRS
select HAVE_DMA_API_DEBUG
+ select HAVE_GENERIC_HARDIRQS
+ select GENERIC_IRQ_PROBE
menu "Machine selection"
endchoice
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 13 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ default "13" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_32KB
+ range 12 64 if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ default "12" if SYS_SUPPORTS_HUGETLBFS && PAGE_SIZE_16KB
+ range 11 64
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+ The page size is not necessarily 4KB. Keep this in mind
+ when choosing a value for this option.
+
config BOARD_SCACHE
bool
config CPU_R4400_WORKAROUNDS
bool
-#
-# Use the generic interrupt handling code in kernel/irq/:
-#
-config GENERIC_HARDIRQS
- bool
- default y
-
-config GENERIC_IRQ_PROBE
- bool
- default y
-
-config IRQ_PER_CPU
- bool
-
#
# - Highmem only makes sense for the 32-bit kernel.
# - The current highmem code will only work properly on physically indexed
static void alchemy_8250_pm(struct uart_port *port, unsigned int state,
unsigned int old_state)
{
+#ifdef CONFIG_SERIAL_8250
switch (state) {
case 0:
if ((__raw_readl(port->membase + UART_MOD_CNTRL) & 3) != 3) {
serial8250_do_pm(port, state, old_state);
break;
}
+#endif
}
#define PORT(_base, _irq) \
prom_init_cmdline();
memsize_str = prom_getenv("memsize");
- if (!memsize_str)
+ if (!memsize_str || strict_strtoul(memsize_str, 0, &memsize))
memsize = ALCHEMY_BOARD_DEFAULT_MEMSIZE;
- else
- strict_strtoul(memsize_str, 0, &memsize);
+
add_memory_region(0, memsize, BOOT_MEM_RAM);
}
calculate(base_clock, frequency, &prediv, &postdiv, &mul);
writel(((prediv - 1) << PREDIV_SHIFT) | (postdiv - 1), &clock->ctrl);
- msleep(1);
+ mdelay(1);
writel(4, &clock->pll);
while (readl(&clock->pll) & PLL_STATUS)
;
writel(((mul - 1) << MUL_SHIFT) | (0xff << 3) | 0x0e, &clock->pll);
- msleep(75);
+ mdelay(75);
}
static void __init tnetd7300_init_clocks(void)
}
EXPORT_SYMBOL(clk_put);
-int __init ar7_init_clocks(void)
+void __init ar7_init_clocks(void)
{
switch (ar7_chip_id()) {
case AR7_CHIP_7100:
}
/* adjust vbus clock rate */
vbus_clk.rate = bus_clk.rate / 2;
-
- return 0;
}
-arch_initcall(ar7_init_clocks);
{
struct clk *cpu_clk;
+ /* Initialize ar7 clocks so the CPU clock frequency is correct */
+ ar7_init_clocks();
+
cpu_clk = clk_get(NULL, "cpu");
if (IS_ERR(cpu_clk)) {
printk(KERN_ERR "unable to get cpu clock\n");
#include <asm/reboot.h>
#include <asm/time.h>
#include <bcm47xx.h>
-#include <asm/fw/cfe/cfe_api.h>
#include <asm/mach-bcm47xx/nvram.h>
struct ssb_bus ssb_bcm47xx;
cpu_relax();
}
-static void str2eaddr(char *str, char *dest)
-{
- int i = 0;
+#define READ_FROM_NVRAM(_outvar, name, buf) \
+ if (nvram_getenv(name, buf, sizeof(buf)) >= 0)\
+ sprom->_outvar = simple_strtoul(buf, NULL, 0);
- if (str == NULL) {
- memset(dest, 0, 6);
- return;
+static void bcm47xx_fill_sprom(struct ssb_sprom *sprom)
+{
+ char buf[100];
+ u32 boardflags;
+
+ memset(sprom, 0, sizeof(struct ssb_sprom));
+
+ sprom->revision = 1; /* Fallback: Old hardware does not define this. */
+ READ_FROM_NVRAM(revision, "sromrev", buf);
+ if (nvram_getenv("il0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->il0mac);
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et0mac);
+ if (nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
+ nvram_parse_macaddr(buf, sprom->et1mac);
+ READ_FROM_NVRAM(et0phyaddr, "et0phyaddr", buf);
+ READ_FROM_NVRAM(et1phyaddr, "et1phyaddr", buf);
+ READ_FROM_NVRAM(et0mdcport, "et0mdcport", buf);
+ READ_FROM_NVRAM(et1mdcport, "et1mdcport", buf);
+ READ_FROM_NVRAM(board_rev, "boardrev", buf);
+ READ_FROM_NVRAM(country_code, "ccode", buf);
+ READ_FROM_NVRAM(ant_available_a, "aa5g", buf);
+ READ_FROM_NVRAM(ant_available_bg, "aa2g", buf);
+ READ_FROM_NVRAM(pa0b0, "pa0b0", buf);
+ READ_FROM_NVRAM(pa0b1, "pa0b1", buf);
+ READ_FROM_NVRAM(pa0b2, "pa0b2", buf);
+ READ_FROM_NVRAM(pa1b0, "pa1b0", buf);
+ READ_FROM_NVRAM(pa1b1, "pa1b1", buf);
+ READ_FROM_NVRAM(pa1b2, "pa1b2", buf);
+ READ_FROM_NVRAM(pa1lob0, "pa1lob0", buf);
+ READ_FROM_NVRAM(pa1lob2, "pa1lob1", buf);
+ READ_FROM_NVRAM(pa1lob1, "pa1lob2", buf);
+ READ_FROM_NVRAM(pa1hib0, "pa1hib0", buf);
+ READ_FROM_NVRAM(pa1hib2, "pa1hib1", buf);
+ READ_FROM_NVRAM(pa1hib1, "pa1hib2", buf);
+ READ_FROM_NVRAM(gpio0, "wl0gpio0", buf);
+ READ_FROM_NVRAM(gpio1, "wl0gpio1", buf);
+ READ_FROM_NVRAM(gpio2, "wl0gpio2", buf);
+ READ_FROM_NVRAM(gpio3, "wl0gpio3", buf);
+ READ_FROM_NVRAM(maxpwr_bg, "pa0maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_al, "pa1lomaxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_a, "pa1maxpwr", buf);
+ READ_FROM_NVRAM(maxpwr_ah, "pa1himaxpwr", buf);
+ READ_FROM_NVRAM(itssi_a, "pa1itssit", buf);
+ READ_FROM_NVRAM(itssi_bg, "pa0itssit", buf);
+ READ_FROM_NVRAM(tri2g, "tri2g", buf);
+ READ_FROM_NVRAM(tri5gl, "tri5gl", buf);
+ READ_FROM_NVRAM(tri5g, "tri5g", buf);
+ READ_FROM_NVRAM(tri5gh, "tri5gh", buf);
+ READ_FROM_NVRAM(rxpo2g, "rxpo2g", buf);
+ READ_FROM_NVRAM(rxpo5g, "rxpo5g", buf);
+ READ_FROM_NVRAM(rssisav2g, "rssisav2g", buf);
+ READ_FROM_NVRAM(rssismc2g, "rssismc2g", buf);
+ READ_FROM_NVRAM(rssismf2g, "rssismf2g", buf);
+ READ_FROM_NVRAM(bxa2g, "bxa2g", buf);
+ READ_FROM_NVRAM(rssisav5g, "rssisav5g", buf);
+ READ_FROM_NVRAM(rssismc5g, "rssismc5g", buf);
+ READ_FROM_NVRAM(rssismf5g, "rssismf5g", buf);
+ READ_FROM_NVRAM(bxa5g, "bxa5g", buf);
+ READ_FROM_NVRAM(cck2gpo, "cck2gpo", buf);
+ READ_FROM_NVRAM(ofdm2gpo, "ofdm2gpo", buf);
+ READ_FROM_NVRAM(ofdm5glpo, "ofdm5glpo", buf);
+ READ_FROM_NVRAM(ofdm5gpo, "ofdm5gpo", buf);
+ READ_FROM_NVRAM(ofdm5ghpo, "ofdm5ghpo", buf);
+
+ if (nvram_getenv("boardflags", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
-
- for (;;) {
- dest[i++] = (char) simple_strtoul(str, NULL, 16);
- str += 2;
- if (!*str++ || i == 6)
- break;
+ if (nvram_getenv("boardflags2", buf, sizeof(buf)) >= 0) {
+ boardflags = simple_strtoul(buf, NULL, 0);
+ if (boardflags) {
+ sprom->boardflags2_lo = (boardflags & 0x0000FFFFU);
+ sprom->boardflags2_hi = (boardflags & 0xFFFF0000U) >> 16;
+ }
}
}
static int bcm47xx_get_invariants(struct ssb_bus *bus,
struct ssb_init_invariants *iv)
{
- char buf[100];
+ char buf[20];
/* Fill boardinfo structure */
memset(&(iv->boardinfo), 0 , sizeof(struct ssb_boardinfo));
- if (cfe_getenv("boardvendor", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
- iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardtype", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardvendor", buf, sizeof(buf)) >= 0)
+ iv->boardinfo.vendor = (u16)simple_strtoul(buf, NULL, 0);
+ else
+ iv->boardinfo.vendor = SSB_BOARDVENDOR_BCM;
+ if (nvram_getenv("boardtype", buf, sizeof(buf)) >= 0)
iv->boardinfo.type = (u16)simple_strtoul(buf, NULL, 0);
- if (cfe_getenv("boardrev", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
+ if (nvram_getenv("boardrev", buf, sizeof(buf)) >= 0)
iv->boardinfo.rev = (u16)simple_strtoul(buf, NULL, 0);
- /* Fill sprom structure */
- memset(&(iv->sprom), 0, sizeof(struct ssb_sprom));
- iv->sprom.revision = 3;
-
- if (cfe_getenv("et0macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et0mac);
+ bcm47xx_fill_sprom(&iv->sprom);
- if (cfe_getenv("et1macaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1macaddr", buf, sizeof(buf)) >= 0)
- str2eaddr(buf, iv->sprom.et1mac);
-
- if (cfe_getenv("et0phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et0phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et1phyaddr", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1phyaddr", buf, sizeof(buf)) >= 0)
- iv->sprom.et1phyaddr = simple_strtoul(buf, NULL, 0);
-
- if (cfe_getenv("et0mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et0mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et0mdcport = simple_strtoul(buf, NULL, 10);
-
- if (cfe_getenv("et1mdcport", buf, sizeof(buf)) >= 0 ||
- nvram_getenv("et1mdcport", buf, sizeof(buf)) >= 0)
- iv->sprom.et1mdcport = simple_strtoul(buf, NULL, 10);
+ if (nvram_getenv("cardbus", buf, sizeof(buf)) >= 0)
+ iv->has_cardbus_slot = !!simple_strtoul(buf, NULL, 10);
return 0;
}
void __init plat_mem_setup(void)
{
int err;
+ char buf[100];
+ struct ssb_mipscore *mcore;
err = ssb_bus_ssbbus_register(&ssb_bcm47xx, SSB_ENUM_BASE,
bcm47xx_get_invariants);
if (err)
panic("Failed to initialize SSB bus (err %d)\n", err);
+ mcore = &ssb_bcm47xx.mipscore;
+ if (nvram_getenv("kernel_args", buf, sizeof(buf)) >= 0) {
+ if (strstr(buf, "console=ttyS1")) {
+ struct ssb_serial_port port;
+
+ printk(KERN_DEBUG "Swapping serial ports!\n");
+ /* swap serial ports */
+ memcpy(&port, &mcore->serial_ports[0], sizeof(port));
+ memcpy(&mcore->serial_ports[0], &mcore->serial_ports[1],
+ sizeof(port));
+ memcpy(&mcore->serial_ports[1], &port, sizeof(port));
+ }
+ }
+
_machine_restart = bcm47xx_machine_restart;
_machine_halt = bcm47xx_machine_halt;
pm_power_off = bcm47xx_machine_halt;
* These are the PRID's for when 23:16 == PRID_COMP_BROADCOM
*/
-#define PRID_IMP_BMIPS4KC 0x4000
-#define PRID_IMP_BMIPS32 0x8000
+#define PRID_IMP_BMIPS32_REV4 0x4000
+#define PRID_IMP_BMIPS32_REV8 0x8000
#define PRID_IMP_BMIPS3300 0x9000
#define PRID_IMP_BMIPS3300_ALT 0x9100
#define PRID_IMP_BMIPS3300_BUG 0x0000
#define SET_PERSONALITY(ex) \
do { \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX) \
+ set_personality(PER_LINUX); \
\
current->thread.abi = &mips_abi; \
} while (0)
#define SET_PERSONALITY(ex) \
do { \
+ unsigned int p; \
+ \
clear_thread_flag(TIF_32BIT_REGS); \
clear_thread_flag(TIF_32BIT_ADDR); \
\
else \
current->thread.abi = &mips_abi; \
\
- if (current->personality != PER_LINUX32) \
+ p = personality(current->personality); \
+ if (p != PER_LINUX32 && p != PER_LINUX) \
set_personality(PER_LINUX); \
} while (0)
"dsrl32 %L0, %L0, 0" "\n\t" \
"dsll32 %M0, %M0, 0" "\n\t" \
"or %L0, %L0, %M0" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"sd %L0, %2" "\n\t" \
+ ".set pop" "\n\t" \
".set mips0" "\n" \
: "=r" (__tmp) \
- : "0" (__val), "m" (*__mem)); \
+ : "0" (__val), "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else \
local_irq_save(__flags); \
__asm__ __volatile__( \
".set mips3" "\t\t# __readq" "\n\t" \
+ ".set push" "\n\t" \
+ ".set noreorder" "\n\t" \
+ ".set nomacro" "\n\t" \
"ld %L0, %1" "\n\t" \
+ ".set pop" "\n\t" \
"dsra32 %M0, %L0, 0" "\n\t" \
"sll %L0, %L0, 0" "\n\t" \
".set mips0" "\n" \
: "=r" (__val) \
- : "m" (*__mem)); \
+ : "R" (*__mem)); \
if (irq) \
local_irq_restore(__flags); \
} else { \
}
int __init ar7_gpio_init(void);
-
-int __init ar7_gpio_init(void);
+void __init ar7_init_clocks(void);
#endif /* __AR7_H__ */
#define __NVRAM_H
#include <linux/types.h>
+#include <linux/kernel.h>
struct nvram_header {
u32 magic;
extern int nvram_getenv(char *name, char *val, size_t val_len);
+static inline void nvram_parse_macaddr(char *buf, u8 *macaddr)
+{
+ sscanf(buf, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx", &macaddr[0], &macaddr[1],
+ &macaddr[2], &macaddr[3], &macaddr[4], &macaddr[5]);
+}
+
#endif
*
* Copyright (c) 2009 Qi Hardware inc.,
* Author: Xiangfu Liu <xiangfu@qi-hardware.com>
- * Copyright 2010, Lars-Petrer Clausen <lars@metafoo.de>
+ * Copyright 2010, Lars-Peter Clausen <lars@metafoo.de>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 or later
QI_LB60_GPIO_KEYIN(3),
QI_LB60_GPIO_KEYIN(4),
QI_LB60_GPIO_KEYIN(5),
- QI_LB60_GPIO_KEYIN(7),
+ QI_LB60_GPIO_KEYIN(6),
QI_LB60_GPIO_KEYIN8,
};
/* PCM */
struct platform_device jz4740_pcm_device = {
- .name = "jz4740-pcm",
+ .name = "jz4740-pcm-audio",
.id = -1,
};
#include <asm/bootinfo.h>
#include <asm/mach-jz4740/base.h>
-void jz4740_init_cmdline(int argc, char *argv[])
+static __init void jz4740_init_cmdline(int argc, char *argv[])
{
unsigned int count = COMMAND_LINE_SIZE - 1;
int i;
cnt = read_c0_count();
cnt += delta;
write_c0_compare(cnt);
- res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
+ res = ((int)(read_c0_count() - cnt) >= 0) ? -ETIME : 0;
return res;
}
{
decode_configs(c);
switch (c->processor_id & 0xff00) {
- case PRID_IMP_BMIPS32:
+ case PRID_IMP_BMIPS32_REV4:
+ case PRID_IMP_BMIPS32_REV8:
c->cputype = CPU_BMIPS32;
__cpu_name[cpu] = "Broadcom BMIPS32";
break;
__cpu_name[cpu] = "Broadcom BMIPS5000";
c->options |= MIPS_CPU_ULRI;
break;
- case PRID_IMP_BMIPS4KC:
- c->cputype = CPU_4KC;
- __cpu_name[cpu] = "MIPS 4Kc";
- break;
}
}
SYSCALL_DEFINE1(32_personality, unsigned long, personality)
{
+ unsigned int p = personality & 0xffffffff;
int ret;
- personality &= 0xffffffff;
+
if (personality(current->personality) == PER_LINUX32 &&
- personality == PER_LINUX)
- personality = PER_LINUX32;
- ret = sys_personality(personality);
- if (ret == PER_LINUX32)
- ret = PER_LINUX;
+ personality(p) == PER_LINUX)
+ p = (p & ~PER_MASK) | PER_LINUX32;
+ ret = sys_personality(p);
+ if (ret != -1 && personality(ret) == PER_LINUX32)
+ ret = (ret & ~PER_MASK) | PER_LINUX;
return ret;
}
childregs->regs[7] = 0; /* Clear error flag */
childregs->regs[2] = 0; /* Child gets zero as return value */
- regs->regs[2] = p->pid;
if (childregs->cp0_status & ST0_CU0) {
childregs->regs[28] = (unsigned long) ti;
return;
base = virt_to_phys((void *)initial_boot_params);
- size = initial_boot_params->totalsize;
+ size = be32_to_cpu(initial_boot_params->totalsize);
/* Before we do anything, lets reserve the dt blob */
reserve_mem_mach(base, size);
{
extern int gic_present;
- /* This is Malta specific: IPI,performance and timer inetrrupts */
+ /* This is Malta specific: IPI,performance and timer interrupts */
if (gic_present)
change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 |
STATUSF_IP6 | STATUSF_IP7);
extern asmlinkage void handle_reserved(void);
extern int fpu_emulator_cop1Handler(struct pt_regs *xcp,
- struct mips_fpu_struct *ctx, int has_fpu);
+ struct mips_fpu_struct *ctx, int has_fpu,
+ void *__user *fault_addr);
void (*board_be_init)(void);
int (*board_be_handler)(struct pt_regs *regs, int is_fixup);
force_sig_info(SIGFPE, &info, current);
}
+static int process_fpemu_return(int sig, void __user *fault_addr)
+{
+ if (sig == SIGSEGV || sig == SIGBUS) {
+ struct siginfo si = {0};
+ si.si_addr = fault_addr;
+ si.si_signo = sig;
+ if (sig == SIGSEGV) {
+ if (find_vma(current->mm, (unsigned long)fault_addr))
+ si.si_code = SEGV_ACCERR;
+ else
+ si.si_code = SEGV_MAPERR;
+ } else {
+ si.si_code = BUS_ADRERR;
+ }
+ force_sig_info(sig, &si, current);
+ return 1;
+ } else if (sig) {
+ force_sig(sig, current);
+ return 1;
+ } else {
+ return 0;
+ }
+}
+
/*
* XXX Delayed fp exceptions when doing a lazy ctx switch XXX
*/
asmlinkage void do_fpe(struct pt_regs *regs, unsigned long fcr31)
{
- siginfo_t info;
+ siginfo_t info = {0};
if (notify_die(DIE_FP, "FP exception", regs, 0, regs_to_trapnr(regs), SIGFPE)
== NOTIFY_STOP)
if (fcr31 & FPU_CSR_UNI_X) {
int sig;
+ void __user *fault_addr = NULL;
/*
* Unimplemented operation exception. If we've got the full
lose_fpu(1);
/* Run the emulator */
- sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1);
+ sig = fpu_emulator_cop1Handler(regs, ¤t->thread.fpu, 1,
+ &fault_addr);
/*
* We can't allow the emulated instruction to leave any of
own_fpu(1); /* Using the FPU again. */
/* If something went wrong, signal */
- if (sig)
- force_sig(sig, current);
+ process_fpemu_return(sig, fault_addr);
return;
} else if (fcr31 & FPU_CSR_INV_X)
if (!raw_cpu_has_fpu) {
int sig;
+ void __user *fault_addr = NULL;
sig = fpu_emulator_cop1Handler(regs,
- ¤t->thread.fpu, 0);
- if (sig)
- force_sig(sig, current);
- else
+ ¤t->thread.fpu,
+ 0, &fault_addr);
+ if (!process_fpemu_return(sig, fault_addr))
mt_ase_fp_affinity();
}
/* this of-course trashes what was there before... */
v->pbuffer = vmalloc(P_SIZE);
+ if (!v->pbuffer) {
+ pr_warning("VPE loader: unable to allocate memory\n");
+ return -ENOMEM;
+ }
v->plen = P_SIZE;
v->load_addr = NULL;
v->len = 0;
if (ret < 0)
v->shared_ptr = NULL;
- // cleanup any temp buffers
- if (v->pbuffer)
- vfree(v->pbuffer);
+ vfree(v->pbuffer);
v->plen = 0;
+
return ret;
}
if (v == NULL)
return -ENODEV;
- if (v->pbuffer == NULL) {
- printk(KERN_ERR "VPE loader: no buffer for program\n");
- return -ENOMEM;
- }
-
if ((count + v->len) > v->plen) {
printk(KERN_WARNING
"VPE loader: elf size too big. Perhaps strip uneeded symbols\n");
.Lfwd_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, 0x3f
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
.Lpartial_fixup:
PTR_L t0, TI_TASK($28)
- LONG_L t0, THREAD_BUADDR(t0)
andi a2, LONGMASK
+ LONG_L t0, THREAD_BUADDR(t0)
LONG_ADDU a2, t1
jr ra
LONG_SUBU a2, t0
#define parse_even_earlier(res, option, p) \
do { \
+ int ret; \
if (strncmp(option, (char *)p, strlen(option)) == 0) \
- strict_strtol((char *)p + strlen(option"="), \
- 10, &res); \
+ ret = strict_strtol((char *)p + strlen(option"="), 10, &res); \
} while (0)
void __init prom_init_env(void)
#if __mips >= 4 && __mips != 32
static int fpux_emu(struct pt_regs *,
- struct mips_fpu_struct *, mips_instruction);
+ struct mips_fpu_struct *, mips_instruction, void *__user *);
#endif
/* Further private data for which no space exists in mips_fpu_struct */
* Two instructions if the instruction is in a branch delay slot.
*/
-static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx)
+static int cop1Emulate(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
+ void *__user *fault_addr)
{
mips_instruction ir;
unsigned long emulpc, contpc;
unsigned int cond;
- if (get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
/* XXX NEC Vr54xx bug workaround */
if ((xcp->cp0_cause & CAUSEF_BD) && !isBranchInstr(&ir))
#endif
return SIGILL;
}
- if (get_user(ir, (mips_instruction __user *) emulpc)) {
+ if (!access_ok(VERIFY_READ, emulpc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
return SIGBUS;
}
+ if (__get_user(ir, (mips_instruction __user *) emulpc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)emulpc;
+ return SIGSEGV;
+ }
/* __compute_return_epc() will have updated cp0_epc */
contpc = xcp->cp0_epc;
/* In order not to confuse ptrace() et al, tweak context */
u64 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_RT(ir));
break;
}
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
u32 val;
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_RT(ir));
break;
}
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_RT(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
}
contpc = (xcp->cp0_epc +
(MIPSInst_SIMM(ir) << 2));
- if (get_user(ir,
- (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc,
+ sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(ir,
+ (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
switch (MIPSInst_OPCODE(ir)) {
case lwc1_op:
#if __mips >= 4 && __mips != 32
case cop1x_op:{
- int sig;
-
- if ((sig = fpux_emu(xcp, ctx, ir)))
+ int sig = fpux_emu(xcp, ctx, ir, fault_addr);
+ if (sig)
return sig;
break;
}
DEF3OP(nmsub, dp, ieee754dp_mul, ieee754dp_sub, ieee754dp_neg);
static int fpux_emu(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- mips_instruction ir)
+ mips_instruction ir, void *__user *fault_addr)
{
unsigned rcsr = 0; /* resulting csr */
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
SITOREG(val, MIPSInst_FD(ir));
break;
MIPS_FPU_EMU_INC_STATS(stores);
SIFROMREG(val, MIPSInst_FS(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u32))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
case madd_s_op:
xcp->regs[MIPSInst_FT(ir)]);
MIPS_FPU_EMU_INC_STATS(loads);
- if (get_user(val, va)) {
+ if (!access_ok(VERIFY_READ, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__get_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
DITOREG(val, MIPSInst_FD(ir));
break;
MIPS_FPU_EMU_INC_STATS(stores);
DIFROMREG(val, MIPSInst_FS(ir));
- if (put_user(val, va)) {
+ if (!access_ok(VERIFY_WRITE, va, sizeof(u64))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
return SIGBUS;
}
+ if (__put_user(val, va)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = va;
+ return SIGSEGV;
+ }
break;
case madd_d_op:
}
int fpu_emulator_cop1Handler(struct pt_regs *xcp, struct mips_fpu_struct *ctx,
- int has_fpu)
+ int has_fpu, void *__user *fault_addr)
{
unsigned long oldepc, prevepc;
mips_instruction insn;
do {
prevepc = xcp->cp0_epc;
- if (get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ if (!access_ok(VERIFY_READ, xcp->cp0_epc, sizeof(mips_instruction))) {
MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
return SIGBUS;
}
+ if (__get_user(insn, (mips_instruction __user *) xcp->cp0_epc)) {
+ MIPS_FPU_EMU_INC_STATS(errors);
+ *fault_addr = (mips_instruction __user *)xcp->cp0_epc;
+ return SIGSEGV;
+ }
if (insn == 0)
xcp->cp0_epc += 4; /* skip nops */
else {
*/
/* convert to ieee library modes */
ieee754_csr.rm = ieee_rm[ieee754_csr.rm];
- sig = cop1Emulate(xcp, ctx);
+ sig = cop1Emulate(xcp, ctx, fault_addr);
/* revert to mips rounding mode */
ieee754_csr.rm = mips_rm[ieee754_csr.rm];
}
return plat_dma_supported(dev, mask);
}
-void mips_dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
__dma_sync((unsigned long)vaddr, size, direction);
}
+EXPORT_SYMBOL(dma_cache_sync);
+
static struct dma_map_ops mips_default_dma_map_ops = {
.alloc_coherent = mips_dma_alloc_coherent,
.free_coherent = mips_dma_free_coherent,
*/
static inline int mips_sc_is_activated(struct cpuinfo_mips *c)
{
+ unsigned int config2 = read_c0_config2();
+ unsigned int tmp;
+
/* Check the bypass bit (L2B) */
switch (c->cputype) {
case CPU_34K:
c->scache.linesz = 2 << tmp;
else
return 0;
+ return 1;
}
static inline int __init mips_sc_probe(void)
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" lbu %0, (%0) \n"
" .set mips0 \n"
: "=r" (res)
- : "m" (vaddr));
+ : "R" (vaddr));
write_c0_status(sr);
ssnop_4();
__asm__ __volatile__ (
" .set mips3 \n"
+ " .set push \n"
+ " .set noreorder \n"
+ " .set nomacro \n"
" ld %0, %1 \n"
+ " .set pop \n"
" sb %2, (%0) \n"
" .set mips0 \n"
: "=&r" (tmp)
- : "m" (vaddr), "r" (c));
+ : "R" (vaddr), "r" (c));
write_c0_status(sr);
ssnop_4();
enum swarm_rtc_type {
RTC_NONE,
RTC_XICOR,
- RTC_M4LT81
+ RTC_M41T81,
};
enum swarm_rtc_type swarm_rtc_type;
sec = xicor_get_time();
break;
- case RTC_M4LT81:
+ case RTC_M41T81:
sec = m41t81_get_time();
break;
case RTC_XICOR:
return xicor_set_time(sec);
- case RTC_M4LT81:
+ case RTC_M41T81:
return m41t81_set_time(sec);
case RTC_NONE:
if (xicor_probe())
swarm_rtc_type = RTC_XICOR;
if (m41t81_probe())
- swarm_rtc_type = RTC_M4LT81;
+ swarm_rtc_type = RTC_M41T81;
#ifdef CONFIG_VT
screen_info = (struct screen_info) {
--- /dev/null
+/* Access to user system call parameters and results
+ *
+ * See asm-generic/syscall.h for function descriptions.
+ *
+ * Copyright (C) 2010 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_SYSCALL_H
+#define _ASM_SYSCALL_H
+
+#include <linux/sched.h>
+#include <linux/err.h>
+
+extern const unsigned long sys_call_table[];
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->orig_d0;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->d0 = regs->orig_d0;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ unsigned long error = regs->d0;
+ return IS_ERR_VALUE(error) ? error : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->d0;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs,
+ int error, long val)
+{
+ regs->d0 = (long) error ?: val;
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ *args++ = regs->a0;
+ case 1:
+ if (!n--) break;
+ *args++ = regs->d1;
+ case 2:
+ if (!n--) break;
+ *args++ = regs->a3;
+ case 3:
+ if (!n--) break;
+ *args++ = regs->a2;
+ case 4:
+ if (!n--) break;
+ *args++ = regs->d3;
+ case 5:
+ if (!n--) break;
+ *args++ = regs->d2;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs,
+ unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ switch (i) {
+ case 0:
+ if (!n--) break;
+ regs->a0 = *args++;
+ case 1:
+ if (!n--) break;
+ regs->d1 = *args++;
+ case 2:
+ if (!n--) break;
+ regs->a3 = *args++;
+ case 3:
+ if (!n--) break;
+ regs->a2 = *args++;
+ case 4:
+ if (!n--) break;
+ regs->d3 = *args++;
+ case 5:
+ if (!n--) break;
+ regs->d2 = *args++;
+ case 6:
+ if (!n--) break;
+ default:
+ BUG();
+ break;
+ }
+}
+
+#endif /* _ASM_SYSCALL_H */
GDBPORT_SERIAL_IER = UART_IER_RDI | UART_IER_RLSI;
/* permit level 0 IRQs to take place */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
tmp = *gdbstub_port->_control;
/* permit level 0 IRQs only */
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
}
/*
asm volatile("mov mdr,%0" : "=d"(mdr));
local_save_flags(epsw);
- local_change_intr_mask_level(NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
+ arch_local_change_intr_mask_level(
+ NUM2EPSW_IM(CONFIG_GDBSTUB_IRQ_LEVEL + 1));
gdbstub_store_fpu();
unsigned long long ll;
unsigned l[2];
} tsc64, result;
- unsigned long tsc, tmp;
+ unsigned long tmp;
unsigned product[3]; /* 96-bit intermediate value */
/* cnt32_to_63() is not safe with preemption */
preempt_disable();
- /* read the TSC value
- */
- tsc = get_cycles();
-
- /* expand to 64-bits.
+ /* expand the tsc to 64-bits.
* - sched_clock() must be called once a minute or better or the
* following will go horribly wrong - see cnt32_to_63()
*/
- tsc64.ll = cnt32_to_63(tsc) & 0x7fffffffffffffffULL;
+ tsc64.ll = cnt32_to_63(get_cycles()) & 0x7fffffffffffffffULL;
preempt_enable();
smp_send_all_nop();
}
-void no_ack_irq(unsigned int irq) { }
-void no_end_irq(unsigned int irq) { }
-
void cpu_ack_irq(unsigned int irq)
{
unsigned long mask = EIEM_MASK(irq);
/* for iosapic interrupts */
if (type) {
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_percpu_irq);
set_irq_chip_data(irq, data);
cpu_unmask_irq(irq);
}
int i;
for (i = CPU_IRQ_BASE; i <= CPU_IRQ_MAX; i++) {
set_irq_chip_and_handler(i, &cpu_interrupt_type,
- handle_level_irq);
+ handle_percpu_irq);
}
set_irq_handler(TIMER_IRQ, handle_percpu_irq);
sys_rt_sigreturn(struct pt_regs *regs, int in_syscall)
{
struct rt_sigframe __user *frame;
- struct siginfo si;
sigset_t set;
unsigned long usp = (regs->gr[30] & ~(0x01UL));
unsigned long sigframe_size = PARISC_RT_SIGFRAME_SIZE;
give_sigsegv:
DBG(1,"sys_rt_sigreturn: Sending SIGSEGV\n");
- si.si_signo = SIGSEGV;
- si.si_errno = 0;
- si.si_code = SI_KERNEL;
- si.si_pid = task_pid_vnr(current);
- si.si_uid = current_uid();
- si.si_addr = &frame->uc;
- force_sig_info(SIGSEGV, &si, current);
+ force_sig(SIGSEGV, current);
return;
}
static void pte_free_submit(struct pte_freelist_batch *batch)
{
- call_rcu(&batch->rcu, pte_free_rcu_callback);
+ call_rcu_sched(&batch->rcu, pte_free_rcu_callback);
}
void pgtable_free_tlb(struct mmu_gather *tlb, void *table, unsigned shift)
#include <linux/kernel_stat.h>
#include <linux/rcupdate.h>
#include <linux/posix-timers.h>
+#include <linux/cpu.h>
#include <asm/s390_ext.h>
#include <asm/timer.h>
__ctl_set_bit(0,10);
}
+static int __cpuinit s390_nohz_notify(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ struct s390_idle_data *idle;
+ long cpu = (long) hcpu;
+
+ idle = &per_cpu(s390_idle, cpu);
+ switch (action) {
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ idle->nohz_delay = 0;
+ default:
+ break;
+ }
+ return NOTIFY_OK;
+}
+
void __init vtime_init(void)
{
/* request the cpu timer external interrupt */
/* Enable cpu timer interrupts on the boot cpu. */
init_cpu_vtimer();
+ cpu_notifier(s390_nohz_notify, 0);
}
select HAVE_SPARSE_IRQ
select RTC_LIB
select GENERIC_ATOMIC64
- select GENERIC_HARDIRQS_NO_DEPRECATED
+ # Support the deprecated APIs until MFD and GPIOLIB catch up.
+ select GENERIC_HARDIRQS_NO_DEPRECATED if !MFD_SUPPORT && !GPIOLIB
help
The SuperH is a RISC processor targeted for use in embedded systems
and consumer electronics; it was also used in the Sega Dreamcast
};
/* FSI */
-/*
- * FSI-B use external clock which came from da7210.
- * So, we should change parent of fsi
- */
-#define FCLKBCR 0xa415000c
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
-
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimckb_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKBCR,
- .rate = 0, /* unknown */
-};
-
static struct sh_fsi_platform_info fsi_info = {
.portb_flags = SH_FSI_BRS_INV |
SH_FSI_OUT_SLAVE_MODE |
/* change parent of FSI B */
clk = clk_get(NULL, "fsib_clk");
if (!IS_ERR(clk)) {
- clk_register(&fsimckb_clk);
- clk_set_parent(clk, &fsimckb_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimckb_clk, 11000);
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimckb_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimckb_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
};
/* FSI */
-/*
- * FSI-A use external clock which came from ak464x.
- * So, we should change parent of fsi
- */
-#define FCLKACR 0xa4150008
-static void fsimck_init(struct clk *clk)
-{
- u32 status = __raw_readl(clk->enable_reg);
-
- /* use external clock */
- status &= ~0x000000ff;
- status |= 0x00000080;
- __raw_writel(status, clk->enable_reg);
-}
-
-static struct clk_ops fsimck_clk_ops = {
- .init = fsimck_init,
-};
-
-static struct clk fsimcka_clk = {
- .ops = &fsimck_clk_ops,
- .enable_reg = (void __iomem *)FCLKACR,
- .rate = 0, /* unknown */
-};
-
/* change J20, J21, J22 pin to 1-2 connection to use slave mode */
static struct sh_fsi_platform_info fsi_info = {
.porta_flags = SH_FSI_BRS_INV |
gpio_request(GPIO_FN_KEYOUT0, NULL);
/* enable FSI */
- gpio_request(GPIO_FN_FSIMCKB, NULL);
gpio_request(GPIO_FN_FSIMCKA, NULL);
+ gpio_request(GPIO_FN_FSIIASD, NULL);
gpio_request(GPIO_FN_FSIOASD, NULL);
gpio_request(GPIO_FN_FSIIABCK, NULL);
gpio_request(GPIO_FN_FSIIALRCK, NULL);
gpio_request(GPIO_FN_FSIOABCK, NULL);
gpio_request(GPIO_FN_FSIOALRCK, NULL);
gpio_request(GPIO_FN_CLKAUDIOAO, NULL);
- gpio_request(GPIO_FN_FSIIBSD, NULL);
- gpio_request(GPIO_FN_FSIOBSD, NULL);
- gpio_request(GPIO_FN_FSIIBBCK, NULL);
- gpio_request(GPIO_FN_FSIIBLRCK, NULL);
- gpio_request(GPIO_FN_FSIOBBCK, NULL);
- gpio_request(GPIO_FN_FSIOBLRCK, NULL);
- gpio_request(GPIO_FN_CLKAUDIOBO, NULL);
- gpio_request(GPIO_FN_FSIIASD, NULL);
/* set SPU2 clock to 83.4 MHz */
clk = clk_get(NULL, "spu_clk");
- if (clk) {
+ if (!IS_ERR(clk)) {
clk_set_rate(clk, clk_round_rate(clk, 83333333));
clk_put(clk);
}
/* change parent of FSI A */
clk = clk_get(NULL, "fsia_clk");
- if (clk) {
- clk_register(&fsimcka_clk);
- clk_set_parent(clk, &fsimcka_clk);
- clk_set_rate(clk, 11000);
- clk_set_rate(&fsimcka_clk, 11000);
+ if (!IS_ERR(clk)) {
+ /* 48kHz dummy clock was used to make sure 1/1 divide */
+ clk_set_rate(&sh7724_fsimcka_clk, 48000);
+ clk_set_parent(clk, &sh7724_fsimcka_clk);
+ clk_set_rate(clk, 48000);
clk_put(clk);
}
void *kmap_coherent(struct page *page, unsigned long addr);
void kunmap_coherent(void *kvaddr);
-#define PG_dcache_dirty PG_arch_1
+#define PG_dcache_clean PG_arch_1
void cpu_cache_init(void);
#define __NR_sendmsg 355
#define __NR_recvmsg 356
#define __NR_recvmmsg 357
+#define __NR_accept4 358
-#define NR_syscalls 358
+#define NR_syscalls 359
#ifdef __KERNEL__
SHDMA_SLAVE_SDHI1_RX,
};
+extern struct clk sh7724_fsimcka_clk;
+extern struct clk sh7724_fsimckb_clk;
+
#endif /* __ASM_SH7724_H__ */
.parent = &pll_clk,
};
+/* External input clock (pin name: FSIMCKA/FSIMCKB ) */
+struct clk sh7724_fsimcka_clk = {
+};
+
+struct clk sh7724_fsimckb_clk = {
+};
+
static struct clk *main_clks[] = {
&r_clk,
&extal_clk,
&fll_clk,
&pll_clk,
&div3_clk,
+ &sh7724_fsimcka_clk,
+ &sh7724_fsimckb_clk,
};
static void div4_kick(struct clk *clk)
[DIV4_M1] = DIV4(FRQCRB, 4, 0x2f7c, CLK_ENABLE_ON_INIT),
};
-enum { DIV6_V, DIV6_FA, DIV6_FB, DIV6_I, DIV6_S, DIV6_NR };
+enum { DIV6_V, DIV6_I, DIV6_S, DIV6_NR };
static struct clk div6_clks[DIV6_NR] = {
[DIV6_V] = SH_CLK_DIV6(&div3_clk, VCLKCR, 0),
- [DIV6_FA] = SH_CLK_DIV6(&div3_clk, FCLKACR, 0),
- [DIV6_FB] = SH_CLK_DIV6(&div3_clk, FCLKBCR, 0),
[DIV6_I] = SH_CLK_DIV6(&div3_clk, IRDACLKCR, 0),
[DIV6_S] = SH_CLK_DIV6(&div3_clk, SPUCLKCR, CLK_ENABLE_ON_INIT),
};
+enum { DIV6_FA, DIV6_FB, DIV6_REPARENT_NR };
+
+/* Indices are important - they are the actual src selecting values */
+static struct clk *fclkacr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimcka_clk,
+ [3] = NULL,
+};
+
+static struct clk *fclkbcr_parent[] = {
+ [0] = &div3_clk,
+ [1] = NULL,
+ [2] = &sh7724_fsimckb_clk,
+ [3] = NULL,
+};
+
+static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
+ [DIV6_FA] = SH_CLK_DIV6_EXT(&div3_clk, FCLKACR, 0,
+ fclkacr_parent, ARRAY_SIZE(fclkacr_parent), 6, 2),
+ [DIV6_FB] = SH_CLK_DIV6_EXT(&div3_clk, FCLKBCR, 0,
+ fclkbcr_parent, ARRAY_SIZE(fclkbcr_parent), 6, 2),
+};
+
static struct clk mstp_clks[HWBLK_NR] = {
SH_HWBLK_CLK(HWBLK_TLB, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
SH_HWBLK_CLK(HWBLK_IC, &div4_clks[DIV4_I], CLK_ENABLE_ON_INIT),
/* DIV6 clocks */
CLKDEV_CON_ID("video_clk", &div6_clks[DIV6_V]),
- CLKDEV_CON_ID("fsia_clk", &div6_clks[DIV6_FA]),
- CLKDEV_CON_ID("fsib_clk", &div6_clks[DIV6_FB]),
+ CLKDEV_CON_ID("fsia_clk", &div6_reparent_clks[DIV6_FA]),
+ CLKDEV_CON_ID("fsib_clk", &div6_reparent_clks[DIV6_FB]),
CLKDEV_CON_ID("irda_clk", &div6_clks[DIV6_I]),
CLKDEV_CON_ID("spu_clk", &div6_clks[DIV6_S]),
if (!ret)
ret = sh_clk_div6_register(div6_clks, DIV6_NR);
+ if (!ret)
+ ret = sh_clk_div6_reparent_register(div6_reparent_clks, DIV6_REPARENT_NR);
+
if (!ret)
ret = sh_hwblk_clk_register(mstp_clks, HWBLK_NR);
.long sys_sendmsg /* 355 */
.long sys_recvmsg
.long sys_recvmmsg
+ .long sys_accept4
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
#endif
flush_cache_one(CACHE_OC_ADDRESS_ARRAY |
* another ASID than the current one.
*/
map_coherent = (current_cpu_data.dcache.n_aliases &&
- !test_bit(PG_dcache_dirty, &page->flags) &&
+ test_bit(PG_dcache_clean, &page->flags) &&
page_mapped(page));
if (map_coherent)
vaddr = kmap_coherent(page, address);
struct address_space *mapping = page_mapping(page);
if (mapping && !mapping_mapped(mapping))
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
else
__flush_dcache_page(__pa(page_address(page)));
}
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(vto, src, len);
kunmap_coherent(vto);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
if (vma->vm_flags & VM_EXEC)
unsigned long len)
{
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK);
memcpy(dst, vfrom, len);
kunmap_coherent(vfrom);
} else {
memcpy(dst, src, len);
if (boot_cpu_data.dcache.n_aliases)
- set_bit(PG_dcache_dirty, &page->flags);
+ clear_bit(PG_dcache_clean, &page->flags);
}
}
vto = kmap_atomic(to, KM_USER1);
if (boot_cpu_data.dcache.n_aliases && page_mapped(from) &&
- !test_bit(PG_dcache_dirty, &from->flags)) {
+ test_bit(PG_dcache_clean, &from->flags)) {
vfrom = kmap_coherent(from, vaddr);
copy_page(vto, vfrom);
kunmap_coherent(vfrom);
page = pfn_to_page(pfn);
if (pfn_valid(pfn)) {
- int dirty = test_and_clear_bit(PG_dcache_dirty, &page->flags);
+ int dirty = !test_and_set_bit(PG_dcache_clean, &page->flags);
if (dirty)
__flush_purge_region(page_address(page), PAGE_SIZE);
}
if (pages_do_alias(addr, vmaddr)) {
if (boot_cpu_data.dcache.n_aliases && page_mapped(page) &&
- !test_bit(PG_dcache_dirty, &page->flags)) {
+ test_bit(PG_dcache_clean, &page->flags)) {
void *kaddr;
kaddr = kmap_coherent(page, vmaddr);
enum fixed_addresses idx;
unsigned long vaddr;
- BUG_ON(test_bit(PG_dcache_dirty, &page->flags));
+ BUG_ON(!test_bit(PG_dcache_clean, &page->flags));
pagefault_disable();
int (*v2_dev_open)(char *devpath);
void (*v2_dev_close)(int d);
int (*v2_dev_read)(int d, char *buf, int nbytes);
- int (*v2_dev_write)(int d, char *buf, int nbytes);
+ int (*v2_dev_write)(int d, const char *buf, int nbytes);
int (*v2_dev_seek)(int d, int hi, int lo);
/* Never issued (multistage load support) */
extern char *prom_mapio(char *virt_hint, int io_space, unsigned int phys_addr, unsigned int num_bytes);
extern void prom_unmapio(char *virt_addr, unsigned int num_bytes);
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
/* Get the prom firmware revision. */
extern int prom_getprev(void);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(char *path);
extern phandle prom_inst2pkg(int);
/* Dorking with Bus ranges... */
/* Boot argument acquisition, returns the boot command line string. */
extern char *prom_getbootargs(void);
-/* Device utilities. */
-
-/* Device operations. */
-
-/* Open the device described by the passed string. Note, that the format
- * of the string is different on V0 vs. V2->higher proms. The caller must
- * know what he/she is doing! Returns the device descriptor, an int.
- */
-extern int prom_devopen(const char *device_string);
-
-/* Close a previously opened device described by the passed integer
- * descriptor.
- */
-extern int prom_devclose(int device_handle);
-
-/* Do a seek operation on the device described by the passed integer
- * descriptor.
- */
-extern void prom_seek(int device_handle, unsigned int seek_hival,
- unsigned int seek_lowval);
-
/* Miscellaneous routines, don't really fit in any category per se. */
/* Reboot the machine with the command line passed. */
/* Halt and power-off the machine. */
extern void prom_halt_power_off(void) __attribute__ ((noreturn));
-/* Set the PROM 'sync' callback function to the passed function pointer.
- * When the user gives the 'sync' command at the prom prompt while the
- * kernel is still active, the prom will call this routine.
- *
- */
-typedef int (*callback_func_t)(long *cmd);
-extern void prom_setcallback(callback_func_t func_ptr);
-
/* Acquire the IDPROM of the root node in the prom device tree. This
* gets passed a buffer where you would like it stuffed. The return value
* is the format type of this idprom or 0xff on error.
*/
extern unsigned char prom_get_idprom(char *idp_buffer, int idpbuf_size);
-/* Character operations to/from the console.... */
-
-/* Non-blocking get character from console. */
-extern int prom_nbgetchar(void);
-
-/* Non-blocking put character to console. */
-extern int prom_nbputchar(char character);
-
-/* Blocking get character from console. */
-extern char prom_getchar(void);
-
-/* Blocking put character to console. */
-extern void prom_putchar(char character);
+/* Write a buffer of characters to the console. */
+extern void prom_console_write_buf(const char *buf, int len);
/* Prom's internal routines, don't use in kernel/boot code. */
extern void prom_printf(const char *fmt, ...);
extern int prom_setprop(phandle node, const char *prop_name, char *prop_value,
int value_size);
-extern phandle prom_pathtoinode(const char *path);
extern phandle prom_inst2pkg(int);
-extern int prom_service_exists(const char *service_name);
extern void prom_sun4v_guest_soft_state(void);
extern int prom_ihandle2path(int handle, char *buffer, int bufsize);
if (leon3_gptimer_regs && leon3_irqctrl_regs) {
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].val, 0);
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].rld,
- (((1000000 / 100) - 1)));
+ (((1000000 / HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[0].ctrl, 0);
#ifdef CONFIG_SMP
}
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].val, 0);
- LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/100) - 1)));
+ LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].rld, (((1000000/HZ) - 1)));
LEON3_BYPASS_STORE_PA(&leon3_gptimer_regs->e[1].ctrl, 0);
# endif
lib-y := bootstr_$(BITS).o
lib-$(CONFIG_SPARC32) += devmap.o
-lib-y += devops_$(BITS).o
lib-y += init_$(BITS).o
lib-$(CONFIG_SPARC32) += memory.o
lib-y += misc_$(BITS).o
extern void restore_current(void);
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-int
-prom_nbgetchar(void)
-{
- static char inc;
- int i = -1;
- unsigned long flags;
-
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- i = (*(romvec->pv_nbgetchar))();
- break;
- case PROM_V2:
- case PROM_V3:
- if( (*(romvec->pv_v2devops).v2_dev_read)(*romvec->pv_v2bootargs.fd_stdin , &inc, 0x1) == 1) {
- i = inc;
- } else {
- i = -1;
- }
- break;
- default:
- i = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return i; /* Ugh, we could spin forever on unsupported proms ;( */
-}
-
/* Non blocking put character to console device, returns -1 if
* unsuccessful.
*/
-int
-prom_nbputchar(char c)
+static int prom_nbputchar(const char *buf)
{
- static char outc;
unsigned long flags;
int i = -1;
spin_lock_irqsave(&prom_lock, flags);
switch(prom_vers) {
case PROM_V0:
- i = (*(romvec->pv_nbputchar))(c);
+ i = (*(romvec->pv_nbputchar))(*buf);
break;
case PROM_V2:
case PROM_V3:
- outc = c;
- if( (*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout, &outc, 0x1) == 1)
+ if ((*(romvec->pv_v2devops).v2_dev_write)(*romvec->pv_v2bootargs.fd_stdout,
+ buf, 0x1) == 1)
i = 0;
- else
- i = -1;
break;
default:
- i = -1;
break;
};
restore_current();
return i; /* Ugh, we could spin forever on unsupported proms ;( */
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
+void prom_console_write_buf(const char *buf, int len)
{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
+ while (len) {
+ int n = prom_nbputchar(buf);
+ if (n)
+ continue;
+ len--;
+ buf++;
+ }
}
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
-{
- while(prom_nbputchar(c) == -1) ;
-}
extern int prom_stdin, prom_stdout;
-/* Non blocking get character from console input device, returns -1
- * if no input was taken. This can be used for polling.
- */
-inline int
-prom_nbgetchar(void)
-{
- unsigned long args[7];
- char inc;
-
- args[0] = (unsigned long) "read";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdin;
- args[4] = (unsigned long) &inc;
- args[5] = 1;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- if (args[6] == 1)
- return inc;
- return -1;
-}
-
-/* Non blocking put character to console device, returns -1 if
- * unsuccessful.
- */
-inline int
-prom_nbputchar(char c)
+static int __prom_console_write_buf(const char *buf, int len)
{
unsigned long args[7];
- char outc;
-
- outc = c;
+ int ret;
args[0] = (unsigned long) "write";
args[1] = 3;
args[2] = 1;
args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) &outc;
- args[5] = 1;
+ args[4] = (unsigned long) buf;
+ args[5] = (unsigned int) len;
args[6] = (unsigned long) -1;
p1275_cmd_direct(args);
- if (args[6] == 1)
- return 0;
- else
+ ret = (int) args[6];
+ if (ret < 0)
return -1;
+ return ret;
}
-/* Blocking version of get character routine above. */
-char
-prom_getchar(void)
-{
- int character;
- while((character = prom_nbgetchar()) == -1) ;
- return (char) character;
-}
-
-/* Blocking version of put character routine above. */
-void
-prom_putchar(char c)
+void prom_console_write_buf(const char *buf, int len)
{
- prom_nbputchar(c);
-}
-
-void
-prom_puts(const char *s, int len)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "write";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) prom_stdout;
- args[4] = (unsigned long) s;
- args[5] = len;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
+ while (len) {
+ int n = __prom_console_write_buf(buf, len);
+ if (n < 0)
+ continue;
+ len -= n;
+ buf += len;
+ }
}
+++ /dev/null
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-extern void restore_current(void);
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns -1 on failure.
- */
-int
-prom_devopen(char *dstr)
-{
- int handle;
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- handle = (*(romvec->pv_v0devops.v0_devopen))(dstr);
- if(handle == 0) handle = -1;
- break;
- case PROM_V2:
- case PROM_V3:
- handle = (*(romvec->pv_v2devops.v2_dev_open))(dstr);
- break;
- default:
- handle = -1;
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-
- return handle;
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_devclose))(dhandle);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_close))(dhandle);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long flags;
- spin_lock_irqsave(&prom_lock, flags);
- switch(prom_vers) {
- case PROM_V0:
- (*(romvec->pv_v0devops.v0_seekdev))(dhandle, seekhi, seeklo);
- break;
- case PROM_V2:
- case PROM_V3:
- (*(romvec->pv_v2devops.v2_dev_seek))(dhandle, seekhi, seeklo);
- break;
- default:
- break;
- };
- restore_current();
- spin_unlock_irqrestore(&prom_lock, flags);
-}
+++ /dev/null
-/*
- * devops.c: Device operations using the PROM.
- *
- * Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
- * Copyright (C) 1996,1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/sched.h>
-
-#include <asm/openprom.h>
-#include <asm/oplib.h>
-
-/* Open the device described by the string 'dstr'. Returns the handle
- * to that device used for subsequent operations on that device.
- * Returns 0 on failure.
- */
-int
-prom_devopen(const char *dstr)
-{
- unsigned long args[5];
-
- args[0] = (unsigned long) "open";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) dstr;
- args[4] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-
- return (int) args[4];
-}
-
-/* Close the device described by device handle 'dhandle'. */
-int
-prom_devclose(int dhandle)
-{
- unsigned long args[4];
-
- args[0] = (unsigned long) "close";
- args[1] = 1;
- args[2] = 0;
- args[3] = (unsigned int) dhandle;
-
- p1275_cmd_direct(args);
-
- return 0;
-}
-
-/* Seek to specified location described by 'seekhi' and 'seeklo'
- * for device 'dhandle'.
- */
-void
-prom_seek(int dhandle, unsigned int seekhi, unsigned int seeklo)
-{
- unsigned long args[7];
-
- args[0] = (unsigned long) "seek";
- args[1] = 3;
- args[2] = 1;
- args[3] = (unsigned int) dhandle;
- args[4] = seekhi;
- args[5] = seeklo;
- args[6] = (unsigned long) -1;
-
- p1275_cmd_direct(args);
-}
#include <asm/system.h>
#include <asm/ldc.h>
-int prom_service_exists(const char *service_name)
+static int prom_service_exists(const char *service_name)
{
unsigned long args[5];
prom_halt();
}
-/* Set prom sync handler to call function 'funcp'. */
-void prom_setcallback(callback_func_t funcp)
-{
- unsigned long args[5];
- if (!funcp)
- return;
- args[0] = (unsigned long) "set-callback";
- args[1] = 1;
- args[2] = 1;
- args[3] = (unsigned long) funcp;
- args[4] = (unsigned long) -1;
- p1275_cmd_direct(args);
-}
-
/* Get the idprom and stuff it into buffer 'idbuf'. Returns the
* format type. 'num_bytes' is the number of bytes that your idbuf
* has space for. Returns 0xff on error.
#include <linux/kernel.h>
#include <linux/compiler.h>
+#include <linux/spinlock.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
+#define CONSOLE_WRITE_BUF_SIZE 1024
+
static char ppbuf[1024];
+static char console_write_buf[CONSOLE_WRITE_BUF_SIZE];
+static DEFINE_RAW_SPINLOCK(console_write_lock);
void notrace prom_write(const char *buf, unsigned int n)
{
- char ch;
+ unsigned int dest_len;
+ unsigned long flags;
+ char *dest;
+
+ dest = console_write_buf;
+ raw_spin_lock_irqsave(&console_write_lock, flags);
- while (n != 0) {
- --n;
- if ((ch = *buf++) == '\n')
- prom_putchar('\r');
- prom_putchar(ch);
+ dest_len = 0;
+ while (n-- != 0) {
+ char ch = *buf++;
+ if (ch == '\n') {
+ *dest++ = '\r';
+ dest_len++;
+ }
+ *dest++ = ch;
+ dest_len++;
+ if (dest_len >= CONSOLE_WRITE_BUF_SIZE - 1) {
+ prom_console_write_buf(console_write_buf, dest_len);
+ dest = console_write_buf;
+ dest_len = 0;
+ }
}
+ if (dest_len)
+ prom_console_write_buf(console_write_buf, dest_len);
+
+ raw_spin_unlock_irqrestore(&console_write_lock, flags);
}
void notrace prom_printf(const char *fmt, ...)
if (node == -1) return 0;
return node;
}
-
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == -1) return 0;
- node = prom_inst2pkg (inst);
- prom_devclose (inst);
- if (node == -1) return 0;
- return node;
-}
return node;
}
-/* Return 'node' assigned to a particular prom 'path'
- * FIXME: Should work for v0 as well
- */
-phandle prom_pathtoinode(const char *path)
-{
- phandle node;
- int inst;
-
- inst = prom_devopen (path);
- if (inst == 0)
- return 0;
- node = prom_inst2pkg(inst);
- prom_devclose(inst);
- if (node == -1)
- return 0;
- return node;
-}
-
int prom_ihandle2path(int handle, char *buffer, int bufsize)
{
unsigned long args[7];
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
struct pt_regs;
-int restore_sigcontext(struct pt_regs *, struct sigcontext __user *, long *);
+int restore_sigcontext(struct pt_regs *, struct sigcontext __user *);
int setup_sigcontext(struct sigcontext __user *, struct pt_regs *);
void do_signal(struct pt_regs *regs);
#endif
return ret;
}
+/* The assembly shim for this function arranges to ignore the return value. */
long compat_sys_rt_sigreturn(struct pt_regs *regs)
{
struct compat_rt_sigframe __user *frame =
(struct compat_rt_sigframe __user *) compat_ptr(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (compat_sys_sigaltstack(&frame->uc.uc_stack, NULL, regs) != 0)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
lw r20, r20
/* Jump to syscall handler. */
- jalr r20; .Lhandle_syscall_link:
- FEEDBACK_REENTER(handle_syscall)
+ jalr r20
+.Lhandle_syscall_link: /* value of "lr" after "jalr r20" above */
/*
* Write our r0 onto the stack so it gets restored instead
PTREGS_PTR(r29, PTREGS_OFFSET_REG(0))
sw r29, r0
+.Lsyscall_sigreturn_skip:
+ FEEDBACK_REENTER(handle_syscall)
+
/* Do syscall trace again, if requested. */
lw r30, r31
andi r30, r30, _TIF_SYSCALL_TRACE
}; \
STD_ENDPROC(_##x)
+/*
+ * Special-case sigreturn to not write r0 to the stack on return.
+ * This is technically more efficient, but it also avoids difficulties
+ * in the 64-bit OS when handling 32-bit compat code, since we must not
+ * sign-extend r0 for the sigreturn return-value case.
+ */
+#define PTREGS_SYSCALL_SIGRETURN(x, reg) \
+ STD_ENTRY(_##x); \
+ addli lr, lr, .Lsyscall_sigreturn_skip - .Lhandle_syscall_link; \
+ { \
+ PTREGS_PTR(reg, PTREGS_OFFSET_BASE); \
+ j x \
+ }; \
+ STD_ENDPROC(_##x)
+
PTREGS_SYSCALL(sys_execve, r3)
PTREGS_SYSCALL(sys_sigaltstack, r2)
-PTREGS_SYSCALL(sys_rt_sigreturn, r0)
+PTREGS_SYSCALL_SIGRETURN(sys_rt_sigreturn, r0)
PTREGS_SYSCALL(sys_cmpxchg_badaddr, r1)
/* Save additional callee-saves to pt_regs, put address in r4 and jump. */
childregs->regs[0] = 0; /* return value is zero */
childregs->sp = sp; /* override with new user stack pointer */
+ /*
+ * If CLONE_SETTLS is set, set "tp" in the new task to "r4",
+ * which is passed in as arg #5 to sys_clone().
+ */
+ if (clone_flags & CLONE_SETTLS)
+ childregs->tp = regs->regs[4];
+
/*
* Copy the callee-saved registers from the passed pt_regs struct
* into the context-switch callee-saved registers area.
return __switch_to(prev, next, next_current_ksp0(next));
}
+/* Note there is an implicit fifth argument if (clone_flags & CLONE_SETTLS). */
SYSCALL_DEFINE5(clone, unsigned long, clone_flags, unsigned long, newsp,
void __user *, parent_tidptr, void __user *, child_tidptr,
struct pt_regs *, regs)
*/
int restore_sigcontext(struct pt_regs *regs,
- struct sigcontext __user *sc, long *pr0)
+ struct sigcontext __user *sc)
{
int err = 0;
int i;
regs->faultnum = INT_SWINT_1_SIGRETURN;
- err |= __get_user(*pr0, &sc->gregs[0]);
return err;
}
-/* sigreturn() returns long since it restores r0 in the interrupted code. */
+/* The assembly shim for this function arranges to ignore the return value. */
SYSCALL_DEFINE1(rt_sigreturn, struct pt_regs *, regs)
{
struct rt_sigframe __user *frame =
(struct rt_sigframe __user *)(regs->sp);
sigset_t set;
- long r0;
if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
goto badframe;
recalc_sigpending();
spin_unlock_irq(¤t->sighand->siglock);
- if (restore_sigcontext(regs, &frame->uc.uc_mcontext, &r0))
+ if (restore_sigcontext(regs, &frame->uc.uc_mcontext))
goto badframe;
if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT)
goto badframe;
- return r0;
+ return 0;
badframe:
force_sig(SIGSEGV, current);
select HAVE_UNSTABLE_SCHED_CLOCK
select HAVE_IDE
select HAVE_OPROFILE
- select HAVE_PERF_EVENTS if (!M386 && !M486)
+ select HAVE_PERF_EVENTS
select HAVE_IRQ_WORK
select HAVE_IOREMAP_PROT
select HAVE_KPROBES
if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
+ if (heap > ((-__PAGE_OFFSET-(128<<20)-1) & 0x7fffffff))
error("Destination address too large");
#endif
#ifndef CONFIG_RELOCATABLE
* by the Free Software Foundation.
*/
+#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/kernel.h>
#define BIOS_BEGIN 0x000a0000
#define BIOS_END 0x00100000
+#define BIOS_ROM_BASE 0xffe00000
+#define BIOS_ROM_END 0xffffffff
+
#ifdef __KERNEL__
/* see comment in arch/x86/kernel/e820.c */
extern struct e820map e820;
#define KVM_NUM_MMU_PAGES (1 << KVM_MMU_HASH_SHIFT)
#define KVM_MIN_FREE_MMU_PAGES 5
#define KVM_REFILL_PAGES 25
-#define KVM_MAX_CPUID_ENTRIES 40
+#define KVM_MAX_CPUID_ENTRIES 80
#define KVM_NR_FIXED_MTRR_REGION 88
#define KVM_NR_VAR_MTRR 8
void pvclock_read_wallclock(struct pvclock_wall_clock *wall,
struct pvclock_vcpu_time_info *vcpu,
struct timespec *ts);
+void pvclock_resume(void);
/*
* Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction,
obj-y += alternative.o i8253.o pci-nommu.o hw_breakpoint.o
obj-y += tsc.o io_delay.o rtc.o
obj-y += pci-iommu_table.o
+obj-y += resource.o
obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o
obj-y += process.o
setup_apic_nmi_watchdog(NULL);
apic_pm_activate();
+
+ /*
+ * Now that local APIC setup is completed for BP, configure the fault
+ * handling for interrupt remapping.
+ */
+ if (!smp_processor_id() && intr_remapping_enabled)
+ enable_drhd_fault_handling();
+
}
#ifdef CONFIG_X86_X2APIC
{
struct irq_cfg *cfg = data->chip_data;
int i, do_unmask_irq = 0, irq = data->irq;
- struct irq_desc *desc = irq_to_desc(irq);
unsigned long v;
irq_complete_move(cfg);
#ifdef CONFIG_GENERIC_PENDING_IRQ
/* If we are moving the irq we need to mask it */
- if (unlikely(desc->status & IRQ_MOVE_PENDING)) {
+ if (unlikely(irq_to_desc(irq)->status & IRQ_MOVE_PENDING)) {
do_unmask_irq = 1;
mask_ioapic(cfg);
}
msg.data |= MSI_DATA_VECTOR(cfg->vector);
msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
+ msg.address_hi = MSI_ADDR_BASE_HI | MSI_ADDR_EXT_DEST_ID(dest);
dmar_msi_write(irq, &msg);
/* need to update phys_pkg_id */
apic->phys_pkg_id = apicid_phys_pkg_id;
}
-
- /*
- * Now that apic routing model is selected, configure the
- * fault handling for intr remapping.
- */
- if (intr_remapping_enabled)
- enable_drhd_fault_handling();
}
/* Same for both flat and physical. */
#endif
+static bool check_hw_exists(void)
+{
+ u64 val, val_new = 0;
+ int ret = 0;
+
+ val = 0xabcdUL;
+ ret |= checking_wrmsrl(x86_pmu.perfctr, val);
+ ret |= rdmsrl_safe(x86_pmu.perfctr, &val_new);
+ if (ret || val != val_new)
+ return false;
+
+ return true;
+}
+
static void reserve_ds_buffers(void);
static void release_ds_buffers(void);
pmu_check_apic();
+ /* sanity check that the hardware exists or is emulated */
+ if (!check_hw_exists()) {
+ pr_cont("Broken PMU hardware detected, software events only.\n");
+ return;
+ }
+
pr_cont("%s PMU driver.\n", x86_pmu.name);
if (x86_pmu.quirks)
#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
#endif
+/* Number of possible pages in the lowmem region */
+LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
+
/* Enough space to fit pagetables for the low memory linear map */
-MAPPING_BEYOND_END = \
- PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
/*
* Worst-case size of the kernel mapping we need to make:
- * the worst-case size of the kernel itself, plus the extra we need
- * to map for the linear map.
+ * a relocatable kernel can live anywhere in lowmem, so we need to be able
+ * to map all of lowmem.
*/
-KERNEL_PAGES = (KERNEL_IMAGE_SIZE + MAPPING_BEYOND_END)>>PAGE_SHIFT
+KERNEL_PAGES = LOWMEM_PAGES
INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE_asm
RESERVE_BRK(pagetables, INIT_MAP_SIZE)
__PAGE_ALIGNED_BSS
.align PAGE_SIZE_asm
#ifdef CONFIG_X86_PAE
-initial_pg_pmd:
+ENTRY(initial_pg_pmd)
.fill 1024*KPMDS,4,0
#else
ENTRY(initial_page_table)
.fill 1024,4,0
#endif
-initial_pg_fixmap:
+ENTRY(initial_pg_fixmap)
.fill 1024,4,0
ENTRY(empty_zero_page)
.fill 4096,1,0
#define HPET_DEV_FSB_CAP 0x1000
#define HPET_DEV_PERI_CAP 0x2000
+#define HPET_MIN_CYCLES 128
+#define HPET_MIN_PROG_DELTA (HPET_MIN_CYCLES + (HPET_MIN_CYCLES >> 1))
+
#define EVT_TO_HPET_DEV(evt) container_of(evt, struct hpet_dev, evt)
/*
/* Calculate the min / max delta */
hpet_clockevent.max_delta_ns = clockevent_delta2ns(0x7FFFFFFF,
&hpet_clockevent);
- /* 5 usec minimum reprogramming delta. */
- hpet_clockevent.min_delta_ns = 5000;
+ /* Setup minimum reprogramming delta. */
+ hpet_clockevent.min_delta_ns = clockevent_delta2ns(HPET_MIN_PROG_DELTA,
+ &hpet_clockevent);
/*
* Start hpet with the boot cpu mask and make it
* the wraparound into account) nor a simple count down event
* mode. Further the write to the comparator register is
* delayed internally up to two HPET clock cycles in certain
- * chipsets (ATI, ICH9,10). We worked around that by reading
- * back the compare register, but that required another
- * workaround for ICH9,10 chips where the first readout after
- * write can return the old stale value. We already have a
- * minimum delta of 5us enforced, but a NMI or SMI hitting
+ * chipsets (ATI, ICH9,10). Some newer AMD chipsets have even
+ * longer delays. We worked around that by reading back the
+ * compare register, but that required another workaround for
+ * ICH9,10 chips where the first readout after write can
+ * return the old stale value. We already had a minimum
+ * programming delta of 5us enforced, but a NMI or SMI hitting
* between the counter readout and the comparator write can
* move us behind that point easily. Now instead of reading
* the compare register back several times, we make the ETIME
* decision based on the following: Return ETIME if the
- * counter value after the write is less than 8 HPET cycles
+ * counter value after the write is less than HPET_MIN_CYCLES
* away from the event or if the counter is already ahead of
- * the event.
+ * the event. The minimum programming delta for the generic
+ * clockevents code is set to 1.5 * HPET_MIN_CYCLES.
*/
res = (s32)(cnt - hpet_readl(HPET_COUNTER));
- return res < 8 ? -ETIME : 0;
+ return res < HPET_MIN_CYCLES ? -ETIME : 0;
}
static void hpet_legacy_set_mode(enum clock_event_mode mode,
static atomic64_t last_value = ATOMIC64_INIT(0);
+void pvclock_resume(void)
+{
+ atomic64_set(&last_value, 0);
+}
+
cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
{
struct pvclock_shadow_time shadow;
--- /dev/null
+#include <linux/ioport.h>
+#include <asm/e820.h>
+
+static void resource_clip(struct resource *res, resource_size_t start,
+ resource_size_t end)
+{
+ resource_size_t low = 0, high = 0;
+
+ if (res->end < start || res->start > end)
+ return; /* no conflict */
+
+ if (res->start < start)
+ low = start - res->start;
+
+ if (res->end > end)
+ high = res->end - end;
+
+ /* Keep the area above or below the conflict, whichever is larger */
+ if (low > high)
+ res->end = start - 1;
+ else
+ res->start = end + 1;
+}
+
+static void remove_e820_regions(struct resource *avail)
+{
+ int i;
+ struct e820entry *entry;
+
+ for (i = 0; i < e820.nr_map; i++) {
+ entry = &e820.map[i];
+
+ resource_clip(avail, entry->addr,
+ entry->addr + entry->size - 1);
+ }
+}
+
+void arch_remove_reservations(struct resource *avail)
+{
+ /* Trim out BIOS areas (low 1MB and high 2MB) and E820 regions */
+ if (avail->flags & IORESOURCE_MEM) {
+ if (avail->start < BIOS_END)
+ avail->start = BIOS_END;
+ resource_clip(avail, BIOS_ROM_BASE, BIOS_ROM_END);
+
+ remove_e820_regions(avail);
+ }
+}
x86_init.oem.arch_setup();
- resource_alloc_from_bottom = 0;
iomem_resource.end = (1ULL << boot_cpu_data.x86_phys_bits) - 1;
setup_memory_map();
parse_setup_data();
* Setup init_xstate_buf to represent the init state of
* all the features managed by the xsave
*/
- init_xstate_buf = alloc_bootmem(xstate_size);
+ init_xstate_buf = alloc_bootmem_align(xstate_size,
+ __alignof__(struct xsave_struct));
init_xstate_buf->i387.mxcsr = MXCSR_DEFAULT;
clts();
static void svm_set_supported_cpuid(u32 func, struct kvm_cpuid_entry2 *entry)
{
switch (func) {
+ case 0x00000001:
+ /* Mask out xsave bit as long as it is not supported by SVM */
+ entry->ecx &= ~(bit(X86_FEATURE_XSAVE));
+ break;
case 0x80000001:
if (nested)
entry->ecx |= (1 << 2); /* Set SVM bit */
return PT_PDPE_LEVEL;
}
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void vmx_cpuid_update(struct kvm_vcpu *vcpu)
{
struct kvm_cpuid_entry2 *best;
u64 __read_mostly host_xcr0;
-static inline u32 bit(int bitno)
-{
- return 1 << (bitno & 31);
-}
-
static void kvm_on_user_return(struct user_return_notifier *urn)
{
unsigned slot;
#ifdef CONFIG_CPU_FREQ
struct cpufreq_policy policy;
memset(&policy, 0, sizeof(policy));
- cpufreq_get_policy(&policy, get_cpu());
+ cpu = get_cpu();
+ cpufreq_get_policy(&policy, cpu);
if (policy.cpuinfo.max_freq)
max_tsc_khz = policy.cpuinfo.max_freq;
+ put_cpu();
#endif
cpufreq_register_notifier(&kvmclock_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
mmu_reset_needed |= kvm_read_cr4(vcpu) != sregs->cr4;
kvm_x86_ops->set_cr4(vcpu, sregs->cr4);
+ if (sregs->cr4 & X86_CR4_OSXSAVE)
+ update_cpuid(vcpu);
if (!is_long_mode(vcpu) && is_pae(vcpu)) {
load_pdptrs(vcpu, vcpu->arch.walk_mmu, vcpu->arch.cr3);
mmu_reset_needed = 1;
return kvm_read_cr0_bits(vcpu, X86_CR0_PG);
}
+static inline u32 bit(int bitno)
+{
+ return 1 << (bitno & 31);
+}
+
void kvm_before_handle_nmi(struct kvm_vcpu *vcpu);
void kvm_after_handle_nmi(struct kvm_vcpu *vcpu);
int kvm_inject_realmode_interrupt(struct kvm_vcpu *vcpu, int irq);
{
lguest_data.pgdir = cr3;
lazy_hcall1(LHCALL_NEW_PGTABLE, cr3);
- cr3_changed = true;
+
+ /* These two page tables are simple, linear, and used during boot */
+ if (cr3 != __pa(swapper_pg_dir) && cr3 != __pa(initial_page_table))
+ cr3_changed = true;
}
static unsigned long lguest_read_cr3(void)
* to forget all of them. Fortunately, this is very rare.
*
* ... except in early boot when the kernel sets up the initial pagetables,
- * which makes booting astonishingly slow: 1.83 seconds! So we don't even tell
- * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds.
+ * which makes booting astonishingly slow: 48 seconds! So we don't even tell
+ * the Host anything changed until we've done the first real page table switch,
+ * which brings boot back to 4.3 seconds.
*/
static void lguest_set_pte(pte_t *ptep, pte_t pteval)
{
clockevents_register_device(&lguest_clockevent);
/* Finally, we unblock the timer interrupt. */
- enable_lguest_irq(0);
+ clear_bit(0, lguest_data.blocked_interrupts);
}
/*
*/
switch_to_new_gdt(0);
- /* We actually boot with all memory mapped, but let's say 128MB. */
- max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
-
/*
* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/processor-flags.h>
+#include <asm/pgtable.h>
/*G:020
* Our story starts with the kernel booting into startup_32 in
/* Set up the initial stack so we can run C code. */
movl $(init_thread_union+THREAD_SIZE),%esp
+ call init_pagetables
+
/* Jumps are relative: we're running __PAGE_OFFSET too low. */
jmp lguest_init+__PAGE_OFFSET
+/*
+ * Initialize page tables. This creates a PDE and a set of page
+ * tables, which are located immediately beyond __brk_base. The variable
+ * _brk_end is set up to point to the first "safe" location.
+ * Mappings are created both at virtual address 0 (identity mapping)
+ * and PAGE_OFFSET for up to _end.
+ *
+ * FIXME: This code is taken verbatim from arch/x86/kernel/head_32.S: they
+ * don't have a stack at this point, so we can't just use call and ret.
+ */
+init_pagetables:
+#if PTRS_PER_PMD > 1
+#define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
+#else
+#define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
+#endif
+#define pa(X) ((X) - __PAGE_OFFSET)
+
+/* Enough space to fit pagetables for the low memory linear map */
+MAPPING_BEYOND_END = \
+ PAGE_TABLE_SIZE(((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT) << PAGE_SHIFT
+#ifdef CONFIG_X86_PAE
+
+ /*
+ * In PAE mode initial_page_table is statically defined to contain
+ * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
+ * entries). The identity mapping is handled by pointing two PGD entries
+ * to the first kernel PMD.
+ *
+ * Note the upper half of each PMD or PTE are always zero at this stage.
+ */
+
+#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
+
+ xorl %ebx,%ebx /* %ebx is kept at zero */
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_pg_pmd), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PMD entry */
+ movl %ecx,(%edx) /* Store PMD entry */
+ /* Upper half already zero */
+ addl $8,%edx
+ movl $512,%ecx
+11:
+ stosl
+ xchgl %eax,%ebx
+ stosl
+ xchgl %eax,%ebx
+ addl $0x1000,%eax
+ loop 11b
+
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+1:
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
+#else /* Not PAE */
+
+page_pde_offset = (__PAGE_OFFSET >> 20);
+
+ movl $pa(__brk_base), %edi
+ movl $pa(initial_page_table), %edx
+ movl $PTE_IDENT_ATTR, %eax
+10:
+ leal PDE_IDENT_ATTR(%edi),%ecx /* Create PDE entry */
+ movl %ecx,(%edx) /* Store identity PDE entry */
+ movl %ecx,page_pde_offset(%edx) /* Store kernel PDE entry */
+ addl $4,%edx
+ movl $1024, %ecx
+11:
+ stosl
+ addl $0x1000,%eax
+ loop 11b
+ /*
+ * End condition: we must map up to the end + MAPPING_BEYOND_END.
+ */
+ movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
+ cmpl %ebp,%eax
+ jb 10b
+ addl $__PAGE_OFFSET, %edi
+ movl %edi, pa(_brk_end)
+ shrl $12, %eax
+ movl %eax, pa(max_pfn_mapped)
+
+ /* Do early initialization of the fixmap area */
+ movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
+ movl %eax,pa(initial_page_table+0xffc)
+#endif
+ ret
+
/*G:055
* We create a macro which puts the assembler code between lgstart_ and lgend_
* markers. These templates are put in the .text section: they can't be
resource_size_t size, resource_size_t align)
{
struct pci_dev *dev = data;
- resource_size_t start = round_down(res->end - size + 1, align);
+ resource_size_t start = res->start;
if (res->flags & IORESOURCE_IO) {
-
- /*
- * If we're avoiding ISA aliases, the largest contiguous I/O
- * port space is 256 bytes. Clearing bits 9 and 10 preserves
- * all 256-byte and smaller alignments, so the result will
- * still be correctly aligned.
- */
- if (!skip_isa_ioresource_align(dev))
- start &= ~0x300;
- } else if (res->flags & IORESOURCE_MEM) {
- if (start < BIOS_END)
- start = res->end; /* fail; no space */
+ if (skip_isa_ioresource_align(dev))
+ return start;
+ if (start & 0x300)
+ start = (start + 0x3ff) & ~0x3ff;
}
return start;
}
struct xen_pci_frontend_ops *xen_pci_frontend;
EXPORT_SYMBOL_GPL(xen_pci_frontend);
+#define XEN_PIRQ_MSI_DATA (MSI_DATA_TRIGGER_EDGE | \
+ MSI_DATA_LEVEL_ASSERT | (3 << 8) | MSI_DATA_VECTOR(0))
+
static void xen_msi_compose_msg(struct pci_dev *pdev, unsigned int pirq,
struct msi_msg *msg)
{
MSI_ADDR_REDIRECTION_CPU |
MSI_ADDR_DEST_ID(pirq);
- msg->data =
- MSI_DATA_TRIGGER_EDGE |
- MSI_DATA_LEVEL_ASSERT |
- /* delivery mode reserved */
- (3 << 8) |
- MSI_DATA_VECTOR(0);
+ msg->data = XEN_PIRQ_MSI_DATA;
}
static int xen_hvm_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
struct msi_msg msg;
list_for_each_entry(msidesc, &dev->msi_list, list) {
+ __read_msi_msg(msidesc, &msg);
+ pirq = MSI_ADDR_EXT_DEST_ID(msg.address_hi) |
+ ((msg.address_lo >> MSI_ADDR_DEST_ID_SHIFT) & 0xff);
+ if (xen_irq_from_pirq(pirq) >= 0 && msg.data == XEN_PIRQ_MSI_DATA) {
+ xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
+ "msi-x" : "msi", &irq, &pirq, XEN_ALLOC_IRQ);
+ if (irq < 0)
+ goto error;
+ ret = set_irq_msi(irq, msidesc);
+ if (ret < 0)
+ goto error_while;
+ printk(KERN_DEBUG "xen: msi already setup: msi --> irq=%d"
+ " pirq=%d\n", irq, pirq);
+ return 0;
+ }
xen_allocate_pirq_msi((type == PCI_CAP_ID_MSIX) ?
- "msi-x" : "msi", &irq, &pirq);
+ "msi-x" : "msi", &irq, &pirq, (XEN_ALLOC_IRQ | XEN_ALLOC_PIRQ));
if (irq < 0 || pirq < 0)
goto error;
printk(KERN_DEBUG "xen: msi --> irq=%d, pirq=%d\n", irq, pirq);
export CPPFLAGS_vdso.lds += -P -C
-VDSO_LDFLAGS_vdso.lds = -m elf_x86_64 -Wl,-soname=linux-vdso.so.1 \
+VDSO_LDFLAGS_vdso.lds = -m64 -Wl,-soname=linux-vdso.so.1 \
-Wl,-z,max-page-size=4096 -Wl,-z,common-page-size=4096
$(obj)/vdso.o: $(src)/vdso.S $(obj)/vdso.so
vdso32-images = $(vdso32.so-y:%=vdso32-%.so)
CPPFLAGS_vdso32.lds = $(CPPFLAGS_vdso.lds)
-VDSO_LDFLAGS_vdso32.lds = -m elf_i386 -Wl,-soname=linux-gate.so.1
+VDSO_LDFLAGS_vdso32.lds = -m32 -Wl,-soname=linux-gate.so.1
# This makes sure the $(obj) subdirectory exists even though vdso32/
# is not a kbuild sub-make subdirectory.
{
struct sched_shutdown r = { .reason = reason };
-#ifdef CONFIG_SMP
- stop_other_cpus();
-#endif
-
if (HYPERVISOR_sched_op(SCHEDOP_shutdown, &r))
BUG();
}
x86_init.paging.pagetable_setup_done = xen_pagetable_setup_done;
pv_mmu_ops = xen_mmu_ops;
- vmap_lazy_unmap = false;
-
memset(dummy_mapping, 0xff, PAGE_SIZE);
}
return 0;
}
-void __init xen_unplug_emulated_devices(void)
+void xen_unplug_emulated_devices(void)
{
int r;
for (i = 0; i < memmap.nr_entries; i++) {
unsigned long long end = map[i].addr + map[i].size;
- if (map[i].type == E820_RAM) {
- if (map[i].addr < mem_end && end > mem_end) {
- /* Truncate region to max_mem. */
- u64 delta = end - mem_end;
+ if (map[i].type == E820_RAM && end > mem_end) {
+ /* RAM off the end - may be partially included */
+ u64 delta = min(map[i].size, end - mem_end);
- map[i].size -= delta;
- extra_pages += PFN_DOWN(delta);
+ map[i].size -= delta;
+ end -= delta;
- end = mem_end;
- }
+ extra_pages += PFN_DOWN(delta);
}
- if (end > xen_extra_mem_start)
+ if (map[i].size > 0 && end > xen_extra_mem_start)
xen_extra_mem_start = end;
- /* If region is non-RAM or below mem_end, add what remains */
- if ((map[i].type != E820_RAM || map[i].addr < mem_end) &&
- map[i].size > 0)
+ /* Add region if any remains */
+ if (map[i].size > 0)
e820_add_region(map[i].addr, map[i].size, map[i].type);
}
return "Xen";
}
-static void xen_idle(void)
-{
- local_irq_disable();
-
- if (need_resched())
- local_irq_enable();
- else {
- current_thread_info()->status &= ~TS_POLLING;
- smp_mb__after_clear_bit();
- safe_halt();
- current_thread_info()->status |= TS_POLLING;
- }
-}
-
/*
* Set the bit indicating "nosegneg" library variants should be used.
* We only need to bother in pure 32-bit mode; compat 32-bit processes
MAX_GUEST_CMDLINE > COMMAND_LINE_SIZE ?
COMMAND_LINE_SIZE : MAX_GUEST_CMDLINE);
- pm_idle = xen_idle;
+ /* Set up idle, making sure it calls safe_halt() pvop */
+#ifdef CONFIG_X86_32
+ boot_cpu_data.hlt_works_ok = 1;
+#endif
+ pm_idle = default_idle;
fiddle_vdso();
}
int cpu;
xen_hvm_init_shared_info();
xen_callback_vector();
+ xen_unplug_emulated_devices();
if (xen_feature(XENFEAT_hvm_safe_pvclock)) {
for_each_online_cpu(cpu) {
xen_setup_runstate_info(cpu);
{
int cpu;
+ pvclock_resume();
+
if (xen_clockevent != &xen_vcpuop_clockevent)
return;
void xen_callback_vector(void);
void xen_hvm_init_shared_info(void);
-void __init xen_unplug_emulated_devices(void);
+void xen_unplug_emulated_devices(void);
void __init xen_build_dynamic_phys_to_machine(void);
int ret, rw;
unsigned int dxfer_len;
void *dxferp = NULL;
+ struct bsg_class_device *bcd = &q->bsg_dev;
+
+ /* if the LLD has been removed then the bsg_unregister_queue will
+ * eventually be called and the class_dev was freed, so we can no
+ * longer use this request_queue. Return no such address.
+ */
+ if (!bcd->class_dev)
+ return ERR_PTR(-ENXIO);
dprintk("map hdr %llx/%u %llx/%u\n", (unsigned long long) hdr->dout_xferp,
hdr->dout_xfer_len, (unsigned long long) hdr->din_xferp,
.release = single_release,
};
#endif
-static int get_ac_property(struct power_supply *psy,
- enum power_supply_property psp,
- union power_supply_propval *val)
-{
- struct acpi_ac *ac = to_acpi_ac(psy);
- switch (psp) {
- case POWER_SUPPLY_PROP_ONLINE:
- val->intval = ac->state;
- break;
- default:
- return -EINVAL;
- }
- return 0;
-}
-static enum power_supply_property ac_props[] = {
- POWER_SUPPLY_PROP_ONLINE,
-};
/* --------------------------------------------------------------------------
AC Adapter Management
-------------------------------------------------------------------------- */
return 0;
}
+/* --------------------------------------------------------------------------
+ sysfs I/F
+ -------------------------------------------------------------------------- */
+static int get_ac_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct acpi_ac *ac = to_acpi_ac(psy);
+
+ if (!ac)
+ return -ENODEV;
+
+ if (acpi_ac_get_state(ac))
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = ac->state;
+ break;
+ default:
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static enum power_supply_property ac_props[] = {
+ POWER_SUPPLY_PROP_ONLINE,
+};
+
#ifdef CONFIG_ACPI_PROCFS_POWER
/* --------------------------------------------------------------------------
FS Interface (/proc)
* It is used to provide exclusive accessing for ERST Error Log
* Address Range too.
*/
-static DEFINE_SPINLOCK(erst_lock);
+static DEFINE_RAW_SPINLOCK(erst_lock);
static inline int erst_errno(int command_status)
{
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
count = __erst_get_record_count();
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return count;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
return -EINVAL;
if (erst_erange.attr & ERST_RANGE_NVRAM) {
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
rc = __erst_write_to_nvram(record);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
if (record->record_length > erst_erange.size)
return -EINVAL;
- if (!spin_trylock_irqsave(&erst_lock, flags))
+ if (!raw_spin_trylock_irqsave(&erst_lock, flags))
return -EBUSY;
memcpy(erst_erange.vaddr, record, record->record_length);
rcd_erange = erst_erange.vaddr;
memcpy(&rcd_erange->persistence_information, "ER", 2);
rc = __erst_write_to_storage(0);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
EXPORT_SYMBOL_GPL(erst_read);
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
rc = __erst_get_next_record_id(&record_id);
if (rc) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
/* no more record */
if (record_id == APEI_ERST_INVALID_RECORD_ID) {
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return 0;
}
len = __erst_read(record_id, record, buflen);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return len;
}
if (erst_disable)
return -ENODEV;
- spin_lock_irqsave(&erst_lock, flags);
+ raw_spin_lock_irqsave(&erst_lock, flags);
if (erst_erange.attr & ERST_RANGE_NVRAM)
rc = __erst_clear_from_nvram(record_id);
else
rc = __erst_clear_from_storage(record_id);
- spin_unlock_irqrestore(&erst_lock, flags);
+ raw_spin_unlock_irqrestore(&erst_lock, flags);
return rc;
}
/* HEST table parsing */
-static struct acpi_table_hest *hest_tab;
+static struct acpi_table_hest *__read_mostly hest_tab;
-static int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
+static const int hest_esrc_len_tab[ACPI_HEST_TYPE_RESERVED] = {
[ACPI_HEST_TYPE_IA32_CHECK] = -1, /* need further calculation */
[ACPI_HEST_TYPE_IA32_CORRECTED_CHECK] = -1,
[ACPI_HEST_TYPE_IA32_NMI] = sizeof(struct acpi_hest_ia_nmi),
unsigned int count;
};
-static int hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes_count(struct acpi_hest_header *hest_hdr, void *data)
{
int *count = data;
return 0;
}
-static int hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
+static int __init hest_parse_ghes(struct acpi_hest_header *hest_hdr, void *data)
{
struct platform_device *ghes_dev;
struct ghes_arr *ghes_arr = data;
return rc;
}
-static int hest_ghes_dev_register(unsigned int ghes_count)
+static int __init hest_ghes_dev_register(unsigned int ghes_count)
{
int rc, i;
struct ghes_arr ghes_arr;
unsigned long flags;
};
+static int acpi_battery_update(struct acpi_battery *battery);
+
#define to_acpi_battery(x) container_of(x, struct acpi_battery, bat);
inline int acpi_battery_present(struct acpi_battery *battery)
int ret = 0;
struct acpi_battery *battery = to_acpi_battery(psy);
+ if (acpi_battery_update(battery))
+ return -ENODEV;
+
if (acpi_battery_present(battery)) {
/* run battery update only if it is present */
acpi_battery_get_state(battery);
ec_flag_msi, "MSI hardware", {
DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-Star")}, NULL},
{
+ ec_flag_msi, "MSI hardware", {
+ DMI_MATCH(DMI_CHASSIS_VENDOR, "MICRO-STAR")}, NULL},
+ {
ec_validate_ecdt, "ASUS hardware", {
DMI_MATCH(DMI_BIOS_VENDOR, "ASUS") }, NULL},
{},
static LIST_HEAD(acpi_ioremaps);
static DEFINE_SPINLOCK(acpi_ioremap_lock);
-#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
-static char osi_setup_string[OSI_STRING_LENGTH_MAX];
-
static void __init acpi_osi_setup_late(void);
/*
unsigned int enable:1;
unsigned int dmi:1;
unsigned int cmdline:1;
- unsigned int known:1;
-} osi_linux = { 0, 0, 0, 0};
+} osi_linux = {0, 0, 0};
static u32 acpi_osi_handler(acpi_string interface, u32 supported)
{
__setup("acpi_os_name=", acpi_os_name_setup);
+#define OSI_STRING_LENGTH_MAX 64 /* arbitrary */
+#define OSI_STRING_ENTRIES_MAX 16 /* arbitrary */
+
+struct osi_setup_entry {
+ char string[OSI_STRING_LENGTH_MAX];
+ bool enable;
+};
+
+static struct osi_setup_entry __initdata osi_setup_entries[OSI_STRING_ENTRIES_MAX];
+
+void __init acpi_osi_setup(char *str)
+{
+ struct osi_setup_entry *osi;
+ bool enable = true;
+ int i;
+
+ if (!acpi_gbl_create_osi_method)
+ return;
+
+ if (str == NULL || *str == '\0') {
+ printk(KERN_INFO PREFIX "_OSI method disabled\n");
+ acpi_gbl_create_osi_method = FALSE;
+ return;
+ }
+
+ if (*str == '!') {
+ str++;
+ enable = false;
+ }
+
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ if (!strcmp(osi->string, str)) {
+ osi->enable = enable;
+ break;
+ } else if (osi->string[0] == '\0') {
+ osi->enable = enable;
+ strncpy(osi->string, str, OSI_STRING_LENGTH_MAX);
+ break;
+ }
+ }
+}
+
static void __init set_osi_linux(unsigned int enable)
{
- if (osi_linux.enable != enable) {
+ if (osi_linux.enable != enable)
osi_linux.enable = enable;
- printk(KERN_NOTICE PREFIX "%sed _OSI(Linux)\n",
- enable ? "Add": "Delet");
- }
if (osi_linux.enable)
acpi_osi_setup("Linux");
static void __init acpi_cmdline_osi_linux(unsigned int enable)
{
- osi_linux.cmdline = 1; /* cmdline set the default */
+ osi_linux.cmdline = 1; /* cmdline set the default and override DMI */
+ osi_linux.dmi = 0;
set_osi_linux(enable);
return;
void __init acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d)
{
- osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
-
printk(KERN_NOTICE PREFIX "DMI detected: %s\n", d->ident);
if (enable == -1)
return;
- osi_linux.known = 1; /* DMI knows which OSI(Linux) default needed */
-
+ osi_linux.dmi = 1; /* DMI knows that this box asks OSI(Linux) */
set_osi_linux(enable);
return;
*/
static void __init acpi_osi_setup_late(void)
{
- char *str = osi_setup_string;
+ struct osi_setup_entry *osi;
+ char *str;
+ int i;
+ acpi_status status;
- if (*str == '\0')
- return;
+ for (i = 0; i < OSI_STRING_ENTRIES_MAX; i++) {
+ osi = &osi_setup_entries[i];
+ str = osi->string;
- if (!strcmp("!Linux", str)) {
- acpi_cmdline_osi_linux(0); /* !enable */
- } else if (*str == '!') {
- if (acpi_remove_interface(++str) == AE_OK)
- printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
- } else if (!strcmp("Linux", str)) {
- acpi_cmdline_osi_linux(1); /* enable */
- } else {
- if (acpi_install_interface(str) == AE_OK)
- printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ if (*str == '\0')
+ break;
+ if (osi->enable) {
+ status = acpi_install_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Added _OSI(%s)\n", str);
+ } else {
+ status = acpi_remove_interface(str);
+
+ if (ACPI_SUCCESS(status))
+ printk(KERN_INFO PREFIX "Deleted _OSI(%s)\n", str);
+ }
}
}
-int __init acpi_osi_setup(char *str)
+static int __init osi_setup(char *str)
{
- if (str == NULL || *str == '\0') {
- printk(KERN_INFO PREFIX "_OSI method disabled\n");
- acpi_gbl_create_osi_method = FALSE;
- } else {
- strncpy(osi_setup_string, str, OSI_STRING_LENGTH_MAX);
- }
+ if (str && !strcmp("Linux", str))
+ acpi_cmdline_osi_linux(1);
+ else if (str && !strcmp("!Linux", str))
+ acpi_cmdline_osi_linux(0);
+ else
+ acpi_osi_setup(str);
return 1;
}
-__setup("acpi_osi=", acpi_osi_setup);
+__setup("acpi_osi=", osi_setup);
/* enable serialization to combat AE_ALREADY_EXISTS errors */
static int __init acpi_serialize_setup(char *str)
return AE_OK;
}
-acpi_status acpi_os_initialize1(void)
+acpi_status __init acpi_os_initialize1(void)
{
kacpid_wq = create_workqueue("kacpid");
kacpi_notify_wq = create_workqueue("kacpi_notify");
resource->name));
} else {
result = __acpi_power_on(resource);
+ if (result)
+ resource->ref_count--;
}
mutex_unlock(&resource->resource_lock);
- return 0;
+ return result;
}
static int acpi_power_off_device(acpi_handle handle)
struct acpi_handle_list *tl = NULL; /* Target Resources */
int i = 0;
-
if (!device || (state < ACPI_STATE_D0) || (state > ACPI_STATE_D3))
return -EINVAL;
+ if (device->power.state == state)
+ return 0;
+
if ((device->power.state < ACPI_STATE_D0)
|| (device->power.state > ACPI_STATE_D3))
return -ENODEV;
goto end;
}
- if (device->power.state == state) {
- goto end;
- }
-
/*
* Then we dereference all power resources used in the current list.
*/
return 0;
}
-static int acpi_thermal_cpufreq_increase(unsigned int cpu)
-{
- return -ENODEV;
-}
-static int acpi_thermal_cpufreq_decrease(unsigned int cpu)
-{
- return -ENODEV;
-}
-
#endif
int acpi_processor_get_limit_info(struct acpi_processor *pr)
static u8 sleep_states[ACPI_S_STATE_COUNT];
-static u32 acpi_target_sleep_state = ACPI_STATE_S0;
-
static void acpi_sleep_tts_switch(u32 acpi_state)
{
union acpi_object in_arg = { ACPI_TYPE_INTEGER };
}
#ifdef CONFIG_ACPI_SLEEP
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
/*
* The ACPI specification wants us to save NVS memory regions during hibernation
* and to restore them during the subsequent resume. Windows does that also for
DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
},
},
+ {
+ .callback = init_nvs_nosave,
+ .ident = "Sony Vaio VGN-NW130D",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
+ },
+ },
{},
};
#endif /* CONFIG_SUSPEND */
err = -ENOMEM;
goto out;
}
- atm_dev = atm_dev_register(DEV_LABEL, &adummy_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, NULL, &adummy_ops, -1, NULL);
if (!atm_dev) {
printk(KERN_ERR DEV_LABEL ": atm_dev_register() failed\n");
err = -ENODEV;
goto out_reset;
}
- dev->atm_dev = atm_dev_register (DEV_LABEL, &amb_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register (DEV_LABEL, &pci_dev->dev, &amb_ops, -1,
+ NULL);
if (!dev->atm_dev) {
PRINTD (DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
if (!dev_data)
return -ENOMEM;
- dev = atm_dev_register(DEV_LABEL,&atmtcp_v_dev_ops,itf,NULL);
+ dev = atm_dev_register(DEV_LABEL,NULL,&atmtcp_v_dev_ops,itf,NULL);
if (!dev) {
kfree(dev_data);
return itf == -1 ? -ENOMEM : -EBUSY;
&zeroes);
if (!cpu_zeroes) goto out1;
}
- dev = atm_dev_register(DEV_LABEL,&ops,-1,NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev) goto out2;
pci_set_drvdata(pci_dev, dev);
eni_dev->pci_dev = pci_dev;
fs_dev, sizeof (struct fs_dev));
if (!fs_dev)
goto err_out;
- atm_dev = atm_dev_register("fs", &ops, -1, NULL);
+ atm_dev = atm_dev_register("fs", &pci_dev->dev, &ops, -1, NULL);
if (!atm_dev)
goto err_out_free_fs_dev;
static int __devinit
-fore200e_register(struct fore200e* fore200e)
+fore200e_register(struct fore200e* fore200e, struct device *parent)
{
struct atm_dev* atm_dev;
DPRINTK(2, "device %s being registered\n", fore200e->name);
- atm_dev = atm_dev_register(fore200e->bus->proc_name, &fore200e_ops, -1,
- NULL);
+ atm_dev = atm_dev_register(fore200e->bus->proc_name, parent, &fore200e_ops,
+ -1, NULL);
if (atm_dev == NULL) {
printk(FORE200E "unable to register device %s\n", fore200e->name);
return -ENODEV;
static int __devinit
-fore200e_init(struct fore200e* fore200e)
+fore200e_init(struct fore200e* fore200e, struct device *parent)
{
- if (fore200e_register(fore200e) < 0)
+ if (fore200e_register(fore200e, parent) < 0)
return -ENODEV;
if (fore200e->bus->configure(fore200e) < 0)
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &op->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
kfree(fore200e);
sprintf(fore200e->name, "%s-%d", bus->model_name, index);
- err = fore200e_init(fore200e);
+ err = fore200e_init(fore200e, &pci_dev->dev);
if (err < 0) {
fore200e_shutdown(fore200e);
goto out_free;
goto init_one_failure;
}
- atm_dev = atm_dev_register(DEV_LABEL, &he_ops, -1, NULL);
+ atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &he_ops, -1, NULL);
if (!atm_dev) {
err = -ENODEV;
goto init_one_failure;
PRINTD(DBG_INFO, "found Madge ATM adapter (hrz) at: IO %x, IRQ %u, MEM %p",
iobase, irq, membase);
- dev->atm_dev = atm_dev_register(DEV_LABEL, &hrz_ops, -1, NULL);
+ dev->atm_dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &hrz_ops, -1,
+ NULL);
if (!(dev->atm_dev)) {
PRINTD(DBG_ERR, "failed to register Madge ATM adapter");
err = -EINVAL;
goto err_out_iounmap;
}
- dev = atm_dev_register("idt77252", &idt77252_ops, -1, NULL);
+ dev = atm_dev_register("idt77252", &pcidev->dev, &idt77252_ops, -1,
+ NULL);
if (!dev) {
printk("%s: can't register atm device\n", card->name);
err = -EIO;
ret = -ENODEV;
goto err_out_free_iadev;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pdev->dev, &ops, -1, NULL);
if (!dev) {
ret = -ENOMEM;
goto err_out_disable_dev;
return -ENOMEM;
}
- atmdev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ atmdev = atm_dev_register(DEV_LABEL, &pci->dev, &ops, -1, NULL);
if (atmdev == NULL) {
printk(KERN_ERR DEV_LABEL
": couldn't register atm device!\n");
}
/* Register device */
- card->atmdev = atm_dev_register("nicstar", &atm_ops, -1, NULL);
+ card->atmdev = atm_dev_register("nicstar", &card->pcidev->dev, &atm_ops,
+ -1, NULL);
if (card->atmdev == NULL) {
printk("nicstar%d: can't register device.\n", i);
error = 17;
static struct atm_vcc* find_vcc(struct atm_dev *dev, short vpi, int vci);
static int list_vccs(int vci);
static void release_vccs(struct atm_dev *dev);
-static int atm_init(struct solos_card *);
+static int atm_init(struct solos_card *, struct device *);
static void atm_remove(struct solos_card *);
static int send_command(struct solos_card *card, int dev, const char *buf, size_t size);
static void solos_bh(unsigned long);
if (db_firmware_upgrade)
flash_upgrade(card, 3);
- err = atm_init(card);
+ err = atm_init(card, &dev->dev);
if (err)
goto out_free_irq;
return err;
}
-static int atm_init(struct solos_card *card)
+static int atm_init(struct solos_card *card, struct device *parent)
{
int i;
skb_queue_head_init(&card->tx_queue[i]);
skb_queue_head_init(&card->cli_queue[i]);
- card->atmdev[i] = atm_dev_register("solos-pci", &fpga_ops, -1, NULL);
+ card->atmdev[i] = atm_dev_register("solos-pci", parent, &fpga_ops, -1, NULL);
if (!card->atmdev[i]) {
dev_err(&card->dev->dev, "Could not register ATM device %d\n", i);
atm_remove(card);
goto out;
}
- dev = atm_dev_register(DEV_LABEL, &ops, -1, NULL);
+ dev = atm_dev_register(DEV_LABEL, &pci_dev->dev, &ops, -1, NULL);
if (!dev)
goto out_free;
- Instructions for use
- --------------------
+ For usage instructions, please refer to:
- 1) Map a Linux block device to an existing rbd image.
-
- Usage: <mon ip addr> <options> <pool name> <rbd image name> [snap name]
-
- $ echo "192.168.0.1 name=admin rbd foo" > /sys/class/rbd/add
-
- The snapshot name can be "-" or omitted to map the image read/write.
-
- 2) List all active blkdev<->object mappings.
-
- In this example, we have performed step #1 twice, creating two blkdevs,
- mapped to two separate rados objects in the rados rbd pool
-
- $ cat /sys/class/rbd/list
- #id major client_name pool name snap KB
- 0 254 client4143 rbd foo - 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - blkdev assigned major
- - rados client id
- - rados pool name
- - rados block device name
- - mapped snapshot ("-" if none)
- - device size in KB
-
-
- 3) Create a snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_create
-
-
- 4) Listing a snapshot.
-
- $ cat /sys/class/rbd/snaps_list
- #id snap KB
- 0 - 1024000 (*)
- 0 foo 1024000
-
- The columns, in order, are:
- - blkdev unique id
- - snapshot name, '-' means none (active read/write version)
- - size of device at time of snapshot
- - the (*) indicates this is the active version
-
- 5) Rollback to snapshot.
-
- Usage: <blkdev id> <snapname>
-
- $ echo "0 mysnap" > /sys/class/rbd/snap_rollback
-
-
- 6) Mapping an image using snapshot.
-
- A snapshot mapping is read-only. This is being done by passing
- snap=<snapname> to the options when adding a device.
-
- $ echo "192.168.0.1 name=admin,snap=mysnap rbd foo" > /sys/class/rbd/add
-
-
- 7) Remove an active blkdev<->rbd image mapping.
-
- In this example, we remove the mapping with blkdev unique id 1.
-
- $ echo 1 > /sys/class/rbd/remove
-
-
- NOTE: The actual creation and deletion of rados objects is outside the scope
- of this driver.
+ Documentation/ABI/testing/sysfs-bus-rbd
*/
u64 len;
};
+struct rbd_snap {
+ struct device dev;
+ const char *name;
+ size_t size;
+ struct list_head node;
+ u64 id;
+};
+
/*
* a single device
*/
int read_only;
struct list_head node;
+
+ /* list of snapshots */
+ struct list_head snaps;
+
+ /* sysfs related */
+ struct device dev;
+};
+
+static struct bus_type rbd_bus_type = {
+ .name = "rbd",
};
static spinlock_t node_lock; /* protects client get/put */
-static struct class *class_rbd; /* /sys/class/rbd */
static DEFINE_MUTEX(ctl_mutex); /* Serialize open/close/setup/teardown */
static LIST_HEAD(rbd_dev_list); /* devices */
static LIST_HEAD(rbd_client_list); /* clients */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev);
+static void rbd_dev_release(struct device *dev);
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size);
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count);
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap);;
+
+
+static struct rbd_device *dev_to_rbd(struct device *dev)
+{
+ return container_of(dev, struct rbd_device, dev);
+}
+
+static struct device *rbd_get_dev(struct rbd_device *rbd_dev)
+{
+ return get_device(&rbd_dev->dev);
+}
+
+static void rbd_put_dev(struct rbd_device *rbd_dev)
+{
+ put_device(&rbd_dev->dev);
+}
static int rbd_open(struct block_device *bdev, fmode_t mode)
{
struct gendisk *disk = bdev->bd_disk;
struct rbd_device *rbd_dev = disk->private_data;
+ rbd_get_dev(rbd_dev);
+
set_device_ro(bdev, rbd_dev->read_only);
if ((mode & FMODE_WRITE) && rbd_dev->read_only)
return 0;
}
+static int rbd_release(struct gendisk *disk, fmode_t mode)
+{
+ struct rbd_device *rbd_dev = disk->private_data;
+
+ rbd_put_dev(rbd_dev);
+
+ return 0;
+}
+
static const struct block_device_operations rbd_bd_ops = {
.owner = THIS_MODULE,
.open = rbd_open,
+ .release = rbd_release,
};
/*
int ret = -ENOMEM;
init_rwsem(&header->snap_rwsem);
-
header->snap_names_len = le64_to_cpu(ondisk->snap_names_len);
header->snapc = kmalloc(sizeof(struct ceph_snap_context) +
snap_count *
return -ERANGE;
}
+static void __rbd_remove_all_snaps(struct rbd_device *rbd_dev)
+{
+ struct rbd_snap *snap;
+
+ while (!list_empty(&rbd_dev->snaps)) {
+ snap = list_first_entry(&rbd_dev->snaps, struct rbd_snap, node);
+ __rbd_remove_snap_dev(rbd_dev, snap);
+ }
+}
+
/*
* only read the first part of the ondisk header, without the snaps info
*/
-static int rbd_update_snaps(struct rbd_device *rbd_dev)
+static int __rbd_update_snaps(struct rbd_device *rbd_dev)
{
int ret;
struct rbd_image_header h;
rbd_dev->header.total_snaps = h.total_snaps;
rbd_dev->header.snapc = h.snapc;
rbd_dev->header.snap_names = h.snap_names;
+ rbd_dev->header.snap_names_len = h.snap_names_len;
rbd_dev->header.snap_sizes = h.snap_sizes;
rbd_dev->header.snapc->seq = snap_seq;
+ ret = __rbd_init_snaps_header(rbd_dev);
+
up_write(&rbd_dev->header.snap_rwsem);
- return 0;
+ return ret;
}
static int rbd_init_disk(struct rbd_device *rbd_dev)
if (rc)
return rc;
+ /* no need to lock here, as rbd_dev is not registered yet */
+ rc = __rbd_init_snaps_header(rbd_dev);
+ if (rc)
+ return rc;
+
rc = rbd_header_set_snap(rbd_dev, rbd_dev->snap_name, &total_size);
if (rc)
return rc;
return rc;
}
-/********************************************************************
- * /sys/class/rbd/
- * add map rados objects to blkdev
- * remove unmap rados objects
- * list show mappings
- *******************************************************************/
+/*
+ sysfs
+*/
+
+static ssize_t rbd_size_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%llu\n", (unsigned long long)rbd_dev->header.image_size);
+}
+
+static ssize_t rbd_major_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
-static void class_rbd_release(struct class *cls)
+ return sprintf(buf, "%d\n", rbd_dev->major);
+}
+
+static ssize_t rbd_client_id_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- kfree(cls);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "client%lld\n", ceph_client_id(rbd_dev->client));
}
-static ssize_t class_rbd_list(struct class *c,
- struct class_attribute *attr,
- char *data)
+static ssize_t rbd_pool_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- int n = 0;
- struct list_head *tmp;
- int max = PAGE_SIZE;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->pool_name);
+}
+
+static ssize_t rbd_name_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->obj);
+}
+
+static ssize_t rbd_snap_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+
+ return sprintf(buf, "%s\n", rbd_dev->snap_name);
+}
+
+static ssize_t rbd_image_refresh(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t size)
+{
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int rc;
+ int ret = size;
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- n += snprintf(data, max,
- "#id\tmajor\tclient_name\tpool\tname\tsnap\tKB\n");
+ rc = __rbd_update_snaps(rbd_dev);
+ if (rc < 0)
+ ret = rc;
- list_for_each(tmp, &rbd_dev_list) {
- struct rbd_device *rbd_dev;
+ mutex_unlock(&ctl_mutex);
+ return ret;
+}
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- n += snprintf(data+n, max-n,
- "%d\t%d\tclient%lld\t%s\t%s\t%s\t%lld\n",
- rbd_dev->id,
- rbd_dev->major,
- ceph_client_id(rbd_dev->client),
- rbd_dev->pool_name,
- rbd_dev->obj, rbd_dev->snap_name,
- rbd_dev->header.image_size >> 10);
- if (n == max)
+static DEVICE_ATTR(size, S_IRUGO, rbd_size_show, NULL);
+static DEVICE_ATTR(major, S_IRUGO, rbd_major_show, NULL);
+static DEVICE_ATTR(client_id, S_IRUGO, rbd_client_id_show, NULL);
+static DEVICE_ATTR(pool, S_IRUGO, rbd_pool_show, NULL);
+static DEVICE_ATTR(name, S_IRUGO, rbd_name_show, NULL);
+static DEVICE_ATTR(refresh, S_IWUSR, NULL, rbd_image_refresh);
+static DEVICE_ATTR(current_snap, S_IRUGO, rbd_snap_show, NULL);
+static DEVICE_ATTR(create_snap, S_IWUSR, NULL, rbd_snap_add);
+static DEVICE_ATTR(rollback_snap, S_IWUSR, NULL, rbd_snap_rollback);
+
+static struct attribute *rbd_attrs[] = {
+ &dev_attr_size.attr,
+ &dev_attr_major.attr,
+ &dev_attr_client_id.attr,
+ &dev_attr_pool.attr,
+ &dev_attr_name.attr,
+ &dev_attr_current_snap.attr,
+ &dev_attr_refresh.attr,
+ &dev_attr_create_snap.attr,
+ &dev_attr_rollback_snap.attr,
+ NULL
+};
+
+static struct attribute_group rbd_attr_group = {
+ .attrs = rbd_attrs,
+};
+
+static const struct attribute_group *rbd_attr_groups[] = {
+ &rbd_attr_group,
+ NULL
+};
+
+static void rbd_sysfs_dev_release(struct device *dev)
+{
+}
+
+static struct device_type rbd_device_type = {
+ .name = "rbd",
+ .groups = rbd_attr_groups,
+ .release = rbd_sysfs_dev_release,
+};
+
+
+/*
+ sysfs - snapshots
+*/
+
+static ssize_t rbd_snap_size_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->size);
+}
+
+static ssize_t rbd_snap_id_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+
+ return sprintf(buf, "%lld\n", (long long)snap->id);
+}
+
+static DEVICE_ATTR(snap_size, S_IRUGO, rbd_snap_size_show, NULL);
+static DEVICE_ATTR(snap_id, S_IRUGO, rbd_snap_id_show, NULL);
+
+static struct attribute *rbd_snap_attrs[] = {
+ &dev_attr_snap_size.attr,
+ &dev_attr_snap_id.attr,
+ NULL,
+};
+
+static struct attribute_group rbd_snap_attr_group = {
+ .attrs = rbd_snap_attrs,
+};
+
+static void rbd_snap_dev_release(struct device *dev)
+{
+ struct rbd_snap *snap = container_of(dev, struct rbd_snap, dev);
+ kfree(snap->name);
+ kfree(snap);
+}
+
+static const struct attribute_group *rbd_snap_attr_groups[] = {
+ &rbd_snap_attr_group,
+ NULL
+};
+
+static struct device_type rbd_snap_device_type = {
+ .groups = rbd_snap_attr_groups,
+ .release = rbd_snap_dev_release,
+};
+
+static void __rbd_remove_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap)
+{
+ list_del(&snap->node);
+ device_unregister(&snap->dev);
+}
+
+static int rbd_register_snap_dev(struct rbd_device *rbd_dev,
+ struct rbd_snap *snap,
+ struct device *parent)
+{
+ struct device *dev = &snap->dev;
+ int ret;
+
+ dev->type = &rbd_snap_device_type;
+ dev->parent = parent;
+ dev->release = rbd_snap_dev_release;
+ dev_set_name(dev, "snap_%s", snap->name);
+ ret = device_register(dev);
+
+ return ret;
+}
+
+static int __rbd_add_snap_dev(struct rbd_device *rbd_dev,
+ int i, const char *name,
+ struct rbd_snap **snapp)
+{
+ int ret;
+ struct rbd_snap *snap = kzalloc(sizeof(*snap), GFP_KERNEL);
+ if (!snap)
+ return -ENOMEM;
+ snap->name = kstrdup(name, GFP_KERNEL);
+ snap->size = rbd_dev->header.snap_sizes[i];
+ snap->id = rbd_dev->header.snapc->snaps[i];
+ if (device_is_registered(&rbd_dev->dev)) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
+ goto err;
+ }
+ *snapp = snap;
+ return 0;
+err:
+ kfree(snap->name);
+ kfree(snap);
+ return ret;
+}
+
+/*
+ * search for the previous snap in a null delimited string list
+ */
+const char *rbd_prev_snap_name(const char *name, const char *start)
+{
+ if (name < start + 2)
+ return NULL;
+
+ name -= 2;
+ while (*name) {
+ if (name == start)
+ return start;
+ name--;
+ }
+ return name + 1;
+}
+
+/*
+ * compare the old list of snapshots that we have to what's in the header
+ * and update it accordingly. Note that the header holds the snapshots
+ * in a reverse order (from newest to oldest) and we need to go from
+ * older to new so that we don't get a duplicate snap name when
+ * doing the process (e.g., removed snapshot and recreated a new
+ * one with the same name.
+ */
+static int __rbd_init_snaps_header(struct rbd_device *rbd_dev)
+{
+ const char *name, *first_name;
+ int i = rbd_dev->header.total_snaps;
+ struct rbd_snap *snap, *old_snap = NULL;
+ int ret;
+ struct list_head *p, *n;
+
+ first_name = rbd_dev->header.snap_names;
+ name = first_name + rbd_dev->header.snap_names_len;
+
+ list_for_each_prev_safe(p, n, &rbd_dev->snaps) {
+ u64 cur_id;
+
+ old_snap = list_entry(p, struct rbd_snap, node);
+
+ if (i)
+ cur_id = rbd_dev->header.snapc->snaps[i - 1];
+
+ if (!i || old_snap->id < cur_id) {
+ /* old_snap->id was skipped, thus was removed */
+ __rbd_remove_snap_dev(rbd_dev, old_snap);
+ continue;
+ }
+ if (old_snap->id == cur_id) {
+ /* we have this snapshot already */
+ i--;
+ name = rbd_prev_snap_name(name, first_name);
+ continue;
+ }
+ for (; i > 0;
+ i--, name = rbd_prev_snap_name(name, first_name)) {
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ cur_id = rbd_dev->header.snapc->snaps[i];
+ /* snapshot removal? handle it above */
+ if (cur_id >= old_snap->id)
+ break;
+ /* a new snapshot */
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+
+ /* note that we add it backward so using n and not p */
+ list_add(&snap->node, n);
+ p = &snap->node;
+ }
+ }
+ /* we're done going over the old snap list, just add what's left */
+ for (; i > 0; i--) {
+ name = rbd_prev_snap_name(name, first_name);
+ if (!name) {
+ WARN_ON(1);
+ return -EINVAL;
+ }
+ ret = __rbd_add_snap_dev(rbd_dev, i - 1, name, &snap);
+ if (ret < 0)
+ return ret;
+ list_add(&snap->node, &rbd_dev->snaps);
+ }
+
+ return 0;
+}
+
+
+static void rbd_root_dev_release(struct device *dev)
+{
+}
+
+static struct device rbd_root_dev = {
+ .init_name = "rbd",
+ .release = rbd_root_dev_release,
+};
+
+static int rbd_bus_add_dev(struct rbd_device *rbd_dev)
+{
+ int ret = -ENOMEM;
+ struct device *dev;
+ struct rbd_snap *snap;
+
+ mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
+ dev = &rbd_dev->dev;
+
+ dev->bus = &rbd_bus_type;
+ dev->type = &rbd_device_type;
+ dev->parent = &rbd_root_dev;
+ dev->release = rbd_dev_release;
+ dev_set_name(dev, "%d", rbd_dev->id);
+ ret = device_register(dev);
+ if (ret < 0)
+ goto done_free;
+
+ list_for_each_entry(snap, &rbd_dev->snaps, node) {
+ ret = rbd_register_snap_dev(rbd_dev, snap,
+ &rbd_dev->dev);
+ if (ret < 0)
break;
}
mutex_unlock(&ctl_mutex);
- return n;
+ return 0;
+done_free:
+ mutex_unlock(&ctl_mutex);
+ return ret;
}
-static ssize_t class_rbd_add(struct class *c,
- struct class_attribute *attr,
- const char *buf, size_t count)
+static void rbd_bus_del_dev(struct rbd_device *rbd_dev)
+{
+ device_unregister(&rbd_dev->dev);
+}
+
+static ssize_t rbd_add(struct bus_type *bus, const char *buf, size_t count)
{
struct ceph_osd_client *osdc;
struct rbd_device *rbd_dev;
/* static rbd_device initialization */
spin_lock_init(&rbd_dev->lock);
INIT_LIST_HEAD(&rbd_dev->node);
+ INIT_LIST_HEAD(&rbd_dev->snaps);
/* generate unique id: find highest unique id, add one */
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
}
rbd_dev->major = irc;
+ rc = rbd_bus_add_dev(rbd_dev);
+ if (rc)
+ goto err_out_disk;
/* set up and announce blkdev mapping */
rc = rbd_init_disk(rbd_dev);
if (rc)
err_out_blkdev:
unregister_blkdev(rbd_dev->major, rbd_dev->name);
+err_out_disk:
+ rbd_free_disk(rbd_dev);
err_out_client:
rbd_put_client(rbd_dev);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
return NULL;
}
-static ssize_t class_rbd_remove(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static void rbd_dev_release(struct device *dev)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, rc;
- unsigned long ul;
-
- rc = strict_strtoul(buf, 10, &ul);
- if (rc)
- return rc;
-
- /* convert to int; abort if we lost anything in the conversion */
- target_id = (int) ul;
- if (target_id != ul)
- return -EINVAL;
-
- /* remove object from list immediately */
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- rbd_dev = __rbd_get_dev(target_id);
- if (rbd_dev)
- list_del_init(&rbd_dev->node);
-
- mutex_unlock(&ctl_mutex);
-
- if (!rbd_dev)
- return -ENOENT;
+ struct rbd_device *rbd_dev =
+ container_of(dev, struct rbd_device, dev);
rbd_put_client(rbd_dev);
/* release module ref */
module_put(THIS_MODULE);
-
- return count;
}
-static ssize_t class_rbd_snaps_list(struct class *c,
- struct class_attribute *attr,
- char *data)
-{
- struct rbd_device *rbd_dev = NULL;
- struct list_head *tmp;
- struct rbd_image_header *header;
- int i, n = 0, max = PAGE_SIZE;
- int ret;
-
- mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
-
- n += snprintf(data, max, "#id\tsnap\tKB\n");
-
- list_for_each(tmp, &rbd_dev_list) {
- char *names, *p;
- struct ceph_snap_context *snapc;
-
- rbd_dev = list_entry(tmp, struct rbd_device, node);
- header = &rbd_dev->header;
-
- down_read(&header->snap_rwsem);
-
- names = header->snap_names;
- snapc = header->snapc;
-
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, RBD_SNAP_HEAD_NAME,
- header->image_size >> 10,
- (!rbd_dev->cur_snap ? " (*)" : ""));
- if (n == max)
- break;
-
- p = names;
- for (i = 0; i < header->total_snaps; i++, p += strlen(p) + 1) {
- n += snprintf(data + n, max - n, "%d\t%s\t%lld%s\n",
- rbd_dev->id, p, header->snap_sizes[i] >> 10,
- (rbd_dev->cur_snap &&
- (snap_index(header, i) == rbd_dev->cur_snap) ?
- " (*)" : ""));
- if (n == max)
- break;
- }
-
- up_read(&header->snap_rwsem);
- }
-
-
- ret = n;
- mutex_unlock(&ctl_mutex);
- return ret;
-}
-
-static ssize_t class_rbd_snaps_refresh(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_remove(struct bus_type *bus,
+ const char *buf,
+ size_t count)
{
struct rbd_device *rbd_dev = NULL;
int target_id, rc;
goto done;
}
- rc = rbd_update_snaps(rbd_dev);
- if (rc < 0)
- ret = rc;
+ list_del_init(&rbd_dev->node);
+
+ __rbd_remove_all_snaps(rbd_dev);
+ rbd_bus_del_dev(rbd_dev);
done:
mutex_unlock(&ctl_mutex);
return ret;
}
-static ssize_t class_rbd_snap_create(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_add(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
- char *name;
-
- name = kmalloc(RBD_MAX_SNAP_NAME_LEN + 1, GFP_KERNEL);
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
+ char *name = kmalloc(count + 1, GFP_KERNEL);
if (!name)
return -ENOMEM;
- /* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- name) != 2) {
- ret = -EINVAL;
- goto done;
- }
+ snprintf(name, count, "%s", buf);
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
-
ret = rbd_header_add_snap(rbd_dev,
name, GFP_KERNEL);
if (ret < 0)
goto done_unlock;
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
ret = count;
done_unlock:
mutex_unlock(&ctl_mutex);
-done:
kfree(name);
return ret;
}
-static ssize_t class_rbd_rollback(struct class *c,
- struct class_attribute *attr,
- const char *buf,
- size_t count)
+static ssize_t rbd_snap_rollback(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf,
+ size_t count)
{
- struct rbd_device *rbd_dev = NULL;
- int target_id, ret;
+ struct rbd_device *rbd_dev = dev_to_rbd(dev);
+ int ret;
u64 snapid;
- char snap_name[RBD_MAX_SNAP_NAME_LEN];
u64 cur_ofs;
- char *seg_name;
+ char *seg_name = NULL;
+ char *snap_name = kmalloc(count + 1, GFP_KERNEL);
+ ret = -ENOMEM;
+ if (!snap_name)
+ return ret;
/* parse snaps add command */
- if (sscanf(buf, "%d "
- "%" __stringify(RBD_MAX_SNAP_NAME_LEN) "s",
- &target_id,
- snap_name) != 2) {
- return -EINVAL;
- }
-
- ret = -ENOMEM;
+ snprintf(snap_name, count, "%s", buf);
seg_name = kmalloc(RBD_MAX_SEG_NAME_LEN + 1, GFP_NOIO);
if (!seg_name)
- return ret;
+ goto done;
mutex_lock_nested(&ctl_mutex, SINGLE_DEPTH_NESTING);
- rbd_dev = __rbd_get_dev(target_id);
- if (!rbd_dev) {
- ret = -ENOENT;
- goto done_unlock;
- }
-
ret = snap_by_name(&rbd_dev->header, snap_name, &snapid, NULL);
if (ret < 0)
goto done_unlock;
seg_name, ret);
}
- ret = rbd_update_snaps(rbd_dev);
+ ret = __rbd_update_snaps(rbd_dev);
if (ret < 0)
goto done_unlock;
done_unlock:
mutex_unlock(&ctl_mutex);
+done:
kfree(seg_name);
+ kfree(snap_name);
return ret;
}
-static struct class_attribute class_rbd_attrs[] = {
- __ATTR(add, 0200, NULL, class_rbd_add),
- __ATTR(remove, 0200, NULL, class_rbd_remove),
- __ATTR(list, 0444, class_rbd_list, NULL),
- __ATTR(snaps_refresh, 0200, NULL, class_rbd_snaps_refresh),
- __ATTR(snap_create, 0200, NULL, class_rbd_snap_create),
- __ATTR(snaps_list, 0444, class_rbd_snaps_list, NULL),
- __ATTR(snap_rollback, 0200, NULL, class_rbd_rollback),
+static struct bus_attribute rbd_bus_attrs[] = {
+ __ATTR(add, S_IWUSR, NULL, rbd_add),
+ __ATTR(remove, S_IWUSR, NULL, rbd_remove),
__ATTR_NULL
};
/*
* create control files in sysfs
- * /sys/class/rbd/...
+ * /sys/bus/rbd/...
*/
static int rbd_sysfs_init(void)
{
- int ret = -ENOMEM;
+ int ret;
- class_rbd = kzalloc(sizeof(*class_rbd), GFP_KERNEL);
- if (!class_rbd)
- goto out;
+ rbd_bus_type.bus_attrs = rbd_bus_attrs;
- class_rbd->name = DRV_NAME;
- class_rbd->owner = THIS_MODULE;
- class_rbd->class_release = class_rbd_release;
- class_rbd->class_attrs = class_rbd_attrs;
+ ret = bus_register(&rbd_bus_type);
+ if (ret < 0)
+ return ret;
- ret = class_register(class_rbd);
- if (ret)
- goto out_class;
- return 0;
+ ret = device_register(&rbd_root_dev);
-out_class:
- kfree(class_rbd);
- class_rbd = NULL;
- pr_err(DRV_NAME ": failed to create class rbd\n");
-out:
return ret;
}
static void rbd_sysfs_cleanup(void)
{
- if (class_rbd)
- class_destroy(class_rbd);
- class_rbd = NULL;
+ device_unregister(&rbd_root_dev);
+ bus_unregister(&rbd_bus_type);
}
int __init rbd_init(void)
static DEFINE_MUTEX(blkfront_mutex);
static const struct block_device_operations xlvbd_block_fops;
-#define BLK_RING_SIZE __RING_SIZE((struct blkif_sring *)0, PAGE_SIZE)
+#define BLK_RING_SIZE __CONST_RING_SIZE(blkif, PAGE_SIZE)
/*
* We have one of these per vbd, whether ide, scsi or 'other'. They
static struct usb_device_id ath3k_table[] = {
/* Atheros AR3011 */
{ USB_DEVICE(0x0CF3, 0x3000) },
+
+ /* Atheros AR3011 with sflash firmware*/
+ { USB_DEVICE(0x0CF3, 0x3002) },
+
{ } /* Terminating entry */
};
/* Broadcom BCM2033 without firmware */
{ USB_DEVICE(0x0a5c, 0x2033), .driver_info = BTUSB_IGNORE },
+ /* Atheros 3011 with sflash firmware */
+ { USB_DEVICE(0x0cf3, 0x3002), .driver_info = BTUSB_IGNORE },
+
/* Broadcom BCM2035 */
{ USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU },
{ USB_DEVICE(0x0a5c, 0x200a), .driver_info = BTUSB_WRONG_SCO_MTU },
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
err = usb_submit_urb(urb, GFP_ATOMIC);
if (err < 0) {
- BT_ERR("%s urb %p failed to resubmit (%d)",
+ if (err != -EPERM)
+ BT_ERR("%s urb %p failed to resubmit (%d)",
hdev->name, urb, -err);
usb_unanchor_urb(urb);
}
static void i830_cleanup(void)
{
- kunmap(intel_private.i8xx_page);
- intel_private.i8xx_flush_page = NULL;
+ if (intel_private.i8xx_flush_page) {
+ kunmap(intel_private.i8xx_flush_page);
+ intel_private.i8xx_flush_page = NULL;
+ }
__free_page(intel_private.i8xx_page);
intel_private.i8xx_page = NULL;
#include <linux/slab.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
+#include <linux/acpi.h>
#include "tpm.h"
#define TPM_HEADER_SIZE 10
static LIST_HEAD(tis_chips);
static DEFINE_SPINLOCK(tis_lock);
+#ifdef CONFIG_ACPI
+static int is_itpm(struct pnp_dev *dev)
+{
+ struct acpi_device *acpi = pnp_acpi_device(dev);
+ struct acpi_hardware_id *id;
+
+ list_for_each_entry(id, &acpi->pnp.ids, list) {
+ if (!strcmp("INTC0102", id->id))
+ return 1;
+ }
+
+ return 0;
+}
+#else
+static int is_itpm(struct pnp_dev *dev)
+{
+ return 0;
+}
+#endif
+
static int check_locality(struct tpm_chip *chip, int l)
{
if ((ioread8(chip->vendor.iobase + TPM_ACCESS(l)) &
"1.2 TPM (device-id 0x%X, rev-id %d)\n",
vendor >> 16, ioread8(chip->vendor.iobase + TPM_RID(0)));
+ if (is_itpm(to_pnp_dev(dev)))
+ itpm = 1;
+
if (itpm)
dev_info(dev, "Intel iTPM workaround enabled\n");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Evgeniy Polyakov <zbr@ioremap.net>");
MODULE_DESCRIPTION("Generic userspace <-> kernelspace connector.");
+MODULE_ALIAS_NET_PF_PROTO(PF_NETLINK, NETLINK_CONNECTOR);
static struct cn_dev cdev;
ifeq ($(CONFIG_DMADEVICES_DEBUG),y)
- EXTRA_CFLAGS += -DDEBUG
+ ccflags-y += -DDEBUG
endif
ifeq ($(CONFIG_DMADEVICES_VDEBUG),y)
- EXTRA_CFLAGS += -DVERBOSE_DEBUG
+ ccflags-y += -DVERBOSE_DEBUG
endif
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
desc->lli.daddr = mem;
desc->lli.ctrla = ctrla
| ATC_DST_WIDTH(mem_width)
- | len >> mem_width;
+ | len >> reg_width;
desc->lli.ctrlb = ctrlb;
if (!first) {
* EIE - Error interrupt enable
* EOSIE - End of segments interrupt enable (basic mode)
* EOLNIE - End of links interrupt enable
+ * BWC - Bandwidth sharing among channels
*/
- DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_EIE
- | FSL_DMA_MR_EOLNIE | FSL_DMA_MR_EOSIE, 32);
+ DMA_OUT(chan, &chan->regs->mr, FSL_DMA_MR_BWC
+ | FSL_DMA_MR_EIE | FSL_DMA_MR_EOLNIE
+ | FSL_DMA_MR_EOSIE, 32);
break;
case FSL_DMA_IP_83XX:
/* Set the channel to below modes:
/*
- * Copyright (C) 2007 Freescale Semiconductor, Inc. All rights reserved.
+ * Copyright (C) 2007-2010 Freescale Semiconductor, Inc. All rights reserved.
*
* Author:
* Zhang Wei <wei.zhang@freescale.com>, Jul 2007
#define FSL_DMA_MR_DAHE 0x00002000
#define FSL_DMA_MR_SAHE 0x00001000
+/*
+ * Bandwidth/pause control determines how many bytes a given
+ * channel is allowed to transfer before the DMA engine pauses
+ * the current channel and switches to the next channel
+ */
+#define FSL_DMA_MR_BWC 0x08000000
+
/* Special MR definition for MPC8349 */
#define FSL_DMA_MR_EOTIE 0x00000080
#define FSL_DMA_MR_PRC_RM 0x00000800
return 0;
err_init:
- while (i-- >= 0) {
+ while (--i >= 0) {
struct imxdma_channel *imxdmac = &imxdma->channel[i];
imx_dma_free(imxdmac->imxdma_channel);
}
struct sdma_buffer_descriptor *bd = &sdmac->bd[i];
int param;
- bd->buffer_addr = sgl->dma_address;
+ bd->buffer_addr = sg->dma_address;
count = sg->length;
{
return platform_driver_probe(&sdma_driver, sdma_probe);
}
-subsys_initcall(sdma_module_init);
+module_init(sdma_module_init);
MODULE_AUTHOR("Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>");
MODULE_DESCRIPTION("i.MX SDMA driver");
if (NULL == dma->dma_pool) {
pr_err("ERR_MDMA:pci_pool_create failed\n");
err = -ENOMEM;
- kfree(dma);
goto err_dma_pool;
}
free_irq(pdev->irq, dma);
err_irq:
pci_pool_destroy(dma->dma_pool);
- kfree(dma);
err_dma_pool:
pr_err("ERR_MDMA:setup_dma failed: %d\n", err);
return err;
.runtime_idle = dma_runtime_idle,
};
-static struct pci_driver intel_mid_dma_pci = {
+static struct pci_driver intel_mid_dma_pci_driver = {
.name = "Intel MID DMA",
.id_table = intel_mid_dma_ids,
.probe = intel_mid_dma_probe,
{
pr_debug("INFO_MDMA: LNW DMA Driver Version %s\n",
INTEL_MID_DMA_DRIVER_VERSION);
- return pci_register_driver(&intel_mid_dma_pci);
+ return pci_register_driver(&intel_mid_dma_pci_driver);
}
fs_initcall(intel_mid_dma_init);
static void __exit intel_mid_dma_exit(void)
{
- pci_unregister_driver(&intel_mid_dma_pci);
+ pci_unregister_driver(&intel_mid_dma_pci_driver);
}
module_exit(intel_mid_dma_exit);
obj-$(CONFIG_INTEL_IOATDMA) += ioatdma.o
-ioatdma-objs := pci.o dma.o dma_v2.o dma_v3.o dca.o
+ioatdma-y := pci.o dma.o dma_v2.o dma_v3.o dca.o
return;
}
- channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
- channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
- channel_writel(pd_chan, SIZE, desc->regs.size);
- channel_writel(pd_chan, NEXT, desc->regs.next);
-
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> dev_addr: %x\n",
pd_chan->chan.chan_id, desc->regs.dev_addr);
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> mem_addr: %x\n",
dev_dbg(chan2dev(&pd_chan->chan), "chan %d -> next: %x\n",
pd_chan->chan.chan_id, desc->regs.next);
- if (list_empty(&desc->tx_list))
+ if (list_empty(&desc->tx_list)) {
+ channel_writel(pd_chan, DEV_ADDR, desc->regs.dev_addr);
+ channel_writel(pd_chan, MEM_ADDR, desc->regs.mem_addr);
+ channel_writel(pd_chan, SIZE, desc->regs.size);
+ channel_writel(pd_chan, NEXT, desc->regs.next);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_ONESHOT);
- else
+ } else {
+ channel_writel(pd_chan, NEXT, desc->txd.phys);
pdc_set_mode(&pd_chan->chan, DMA_CTL0_SG);
+ }
val = dma_readl(pd, CTL2);
val |= 1 << (DMA_CTL2_START_SHIFT_BITS + pd_chan->chan.chan_id);
if (!request_mem_region(res.start, resource_size(&res),
dev_driver_string(&ofdev->dev))) {
- dev_err(&ofdev->dev, "failed to request memory region "
- "(0x%016llx-0x%016llx)\n",
- (u64)res.start, (u64)res.end);
+ dev_err(&ofdev->dev, "failed to request memory region %pR\n",
+ &res);
initcode = PPC_ADMA_INIT_MEMREG;
ret = -EBUSY;
goto out;
MODULE_AUTHOR("Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>");
MODULE_DESCRIPTION("Renesas SH DMA Engine driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:sh-dma-engine");
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
obj-$(CONFIG_EDAC_MCE) += edac_mce.o
-edac_core-objs := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
-edac_core-objs += edac_module.o edac_device_sysfs.o
+edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y += edac_module.o edac_device_sysfs.o
ifdef CONFIG_PCI
-edac_core-objs += edac_pci.o edac_pci_sysfs.o
+edac_core-y += edac_pci.o edac_pci_sysfs.o
endif
obj-$(CONFIG_EDAC_MCE_INJ) += mce_amd_inj.o
-edac_mce_amd-objs := mce_amd.o
+edac_mce_amd-y := mce_amd.o
obj-$(CONFIG_EDAC_DECODE_MCE) += edac_mce_amd.o
obj-$(CONFIG_EDAC_AMD76X) += amd76x_edac.o
debugf1(" HoleOffset=0x%x HoleValid=0x%x IntlvSel=0x%x\n",
hole_off, hole_valid, intlv_sel);
- if (intlv_en ||
+ if (intlv_en &&
(intlv_sel != ((sys_addr >> 12) & intlv_en)))
return -EINVAL;
#define MC_PROC_NAME_MAX_LEN 7
#if PAGE_SHIFT < 20
-#define PAGES_TO_MiB( pages ) ( ( pages ) >> ( 20 - PAGE_SHIFT ) )
-#define MiB_TO_PAGES(mb) ((mb) >> (20 - PAGE_SHIFT))
+#define PAGES_TO_MiB(pages) ((pages) >> (20 - PAGE_SHIFT))
+#define MiB_TO_PAGES(mb) ((mb) << (20 - PAGE_SHIFT))
#else /* PAGE_SHIFT > 20 */
-#define PAGES_TO_MiB( pages ) ( ( pages ) << ( PAGE_SHIFT - 20 ) )
+#define PAGES_TO_MiB(pages) ((pages) << (PAGE_SHIFT - 20))
#define MiB_TO_PAGES(mb) ((mb) >> (PAGE_SHIFT - 20))
#endif
return NULL;
}
- /* marking MCI offline */
- mci->op_state = OP_OFFLINE;
-
del_mc_from_global_list(mci);
mutex_unlock(&mem_ctls_mutex);
- /* flush workq processes and remove sysfs */
+ /* flush workq processes */
edac_mc_workq_teardown(mci);
+
+ /* marking MCI offline */
+ mci->op_state = OP_OFFLINE;
+
+ /* remove from sysfs */
edac_remove_sysfs_mci_device(mci);
edac_printk(KERN_INFO, EDAC_MC,
return 0;
err_sysfs_create:
- while (i-- >= 0)
+ while (--i >= 0)
sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
kobject_del(mce_kobj);
*/
#include <linux/bug.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/firewire.h>
#include <linux/firewire-constants.h>
#include <asm/unaligned.h>
#include <net/arp.h>
-#define FWNET_MAX_FRAGMENTS 25 /* arbitrary limit */
-#define FWNET_ISO_PAGE_COUNT (PAGE_SIZE < 16 * 1024 ? 4 : 2)
+/* rx limits */
+#define FWNET_MAX_FRAGMENTS 30 /* arbitrary, > TX queue depth */
+#define FWNET_ISO_PAGE_COUNT (PAGE_SIZE < 16*1024 ? 4 : 2)
+
+/* tx limits */
+#define FWNET_MAX_QUEUED_DATAGRAMS 20 /* < 64 = number of tlabels */
+#define FWNET_MIN_QUEUED_DATAGRAMS 10 /* should keep AT DMA busy enough */
+#define FWNET_TX_QUEUE_LEN FWNET_MAX_QUEUED_DATAGRAMS /* ? */
#define IEEE1394_BROADCAST_CHANNEL 31
#define IEEE1394_ALL_NODES (0xffc0 | 0x003f)
struct fw_address_handler handler;
u64 local_fifo;
- /* List of packets to be sent */
- struct list_head packet_list;
- /*
- * List of packets that were broadcasted. When we get an ISO interrupt
- * one of them has been sent
- */
- struct list_head broadcasted_list;
- /* List of packets that have been sent but not yet acked */
- struct list_head sent_list;
+ /* Number of tx datagrams that have been queued but not yet acked */
+ int queued_datagrams;
struct list_head peer_list;
struct fw_card *card;
unsigned pdg_size; /* pd_list size */
u16 datagram_label; /* outgoing datagram label */
- unsigned max_payload; /* includes RFC2374_FRAG_HDR_SIZE overhead */
+ u16 max_payload; /* includes RFC2374_FRAG_HDR_SIZE overhead */
int node_id;
int generation;
unsigned speed;
/* This is our task struct. It's used for the packet complete callback. */
struct fwnet_packet_task {
- /*
- * ptask can actually be on dev->packet_list, dev->broadcasted_list,
- * or dev->sent_list depending on its current state.
- */
- struct list_head pt_link;
struct fw_transaction transaction;
struct rfc2734_header hdr;
struct sk_buff *skb;
struct fwnet_device *dev;
int outstanding_pkts;
- unsigned max_payload;
u64 fifo_addr;
u16 dest_node;
+ u16 max_payload;
u8 generation;
u8 speed;
+ u8 enqueued;
};
/*
net->stats.rx_packets++;
net->stats.rx_bytes += skb->len;
}
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
return 0;
net->stats.rx_dropped++;
dev_kfree_skb_any(skb);
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
return -ENOENT;
}
* Datagram is not complete, we're done for the
* moment.
*/
- spin_unlock_irqrestore(&dev->lock, flags);
-
- return 0;
+ retval = 0;
fail:
spin_unlock_irqrestore(&dev->lock, flags);
- if (netif_queue_stopped(net))
- netif_wake_queue(net);
-
return retval;
}
kmem_cache_free(fwnet_packet_task_cache, ptask);
}
+/* Caller must hold dev->lock. */
+static void dec_queued_datagrams(struct fwnet_device *dev)
+{
+ if (--dev->queued_datagrams == FWNET_MIN_QUEUED_DATAGRAMS)
+ netif_wake_queue(dev->netdev);
+}
+
static int fwnet_send_packet(struct fwnet_packet_task *ptask);
static void fwnet_transmit_packet_done(struct fwnet_packet_task *ptask)
{
struct fwnet_device *dev = ptask->dev;
+ struct sk_buff *skb = ptask->skb;
unsigned long flags;
bool free;
ptask->outstanding_pkts--;
/* Check whether we or the networking TX soft-IRQ is last user. */
- free = (ptask->outstanding_pkts == 0 && !list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && ptask->enqueued);
+ if (free)
+ dec_queued_datagrams(dev);
- if (ptask->outstanding_pkts == 0)
- list_del(&ptask->pt_link);
+ if (ptask->outstanding_pkts == 0) {
+ dev->netdev->stats.tx_packets++;
+ dev->netdev->stats.tx_bytes += skb->len;
+ }
spin_unlock_irqrestore(&dev->lock, flags);
u16 fg_off;
u16 datagram_label;
u16 lf;
- struct sk_buff *skb;
/* Update the ptask to point to the next fragment and send it */
lf = fwnet_get_hdr_lf(&ptask->hdr);
datagram_label = fwnet_get_hdr_dgl(&ptask->hdr);
break;
}
- skb = ptask->skb;
+
skb_pull(skb, ptask->max_payload);
if (ptask->outstanding_pkts > 1) {
fwnet_make_sf_hdr(&ptask->hdr, RFC2374_HDR_INTFRAG,
fwnet_free_ptask(ptask);
}
+static void fwnet_transmit_packet_failed(struct fwnet_packet_task *ptask)
+{
+ struct fwnet_device *dev = ptask->dev;
+ unsigned long flags;
+ bool free;
+
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* One fragment failed; don't try to send remaining fragments. */
+ ptask->outstanding_pkts = 0;
+
+ /* Check whether we or the networking TX soft-IRQ is last user. */
+ free = ptask->enqueued;
+ if (free)
+ dec_queued_datagrams(dev);
+
+ dev->netdev->stats.tx_dropped++;
+ dev->netdev->stats.tx_errors++;
+
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ if (free)
+ fwnet_free_ptask(ptask);
+}
+
static void fwnet_write_complete(struct fw_card *card, int rcode,
void *payload, size_t length, void *data)
{
ptask = data;
- if (rcode == RCODE_COMPLETE)
+ if (rcode == RCODE_COMPLETE) {
fwnet_transmit_packet_done(ptask);
- else
+ } else {
fw_error("fwnet_write_complete: failed: %x\n", rcode);
- /* ??? error recovery */
+ fwnet_transmit_packet_failed(ptask);
+ }
}
static int fwnet_send_packet(struct fwnet_packet_task *ptask)
spin_lock_irqsave(&dev->lock, flags);
/* If the AT tasklet already ran, we may be last user. */
- free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
if (!free)
- list_add_tail(&ptask->pt_link, &dev->broadcasted_list);
+ ptask->enqueued = true;
+ else
+ dec_queued_datagrams(dev);
spin_unlock_irqrestore(&dev->lock, flags);
spin_lock_irqsave(&dev->lock, flags);
/* If the AT tasklet already ran, we may be last user. */
- free = (ptask->outstanding_pkts == 0 && list_empty(&ptask->pt_link));
+ free = (ptask->outstanding_pkts == 0 && !ptask->enqueued);
if (!free)
- list_add_tail(&ptask->pt_link, &dev->sent_list);
+ ptask->enqueued = true;
+ else
+ dec_queued_datagrams(dev);
spin_unlock_irqrestore(&dev->lock, flags);
struct fwnet_peer *peer;
unsigned long flags;
+ spin_lock_irqsave(&dev->lock, flags);
+
+ /* Can this happen? */
+ if (netif_queue_stopped(dev->netdev)) {
+ spin_unlock_irqrestore(&dev->lock, flags);
+
+ return NETDEV_TX_BUSY;
+ }
+
ptask = kmem_cache_alloc(fwnet_packet_task_cache, GFP_ATOMIC);
if (ptask == NULL)
goto fail;
proto = hdr_buf.h_proto;
dg_size = skb->len;
- /* serialize access to peer, including peer->datagram_label */
- spin_lock_irqsave(&dev->lock, flags);
-
/*
* Set the transmission type for the packet. ARP packets and IP
* broadcast packets are sent via GASP.
peer = fwnet_peer_find_by_guid(dev, be64_to_cpu(guid));
if (!peer || peer->fifo == FWNET_NO_FIFO_ADDR)
- goto fail_unlock;
+ goto fail;
generation = peer->generation;
dest_node = peer->node_id;
max_payload += RFC2374_FRAG_HDR_SIZE;
}
+ if (++dev->queued_datagrams == FWNET_MAX_QUEUED_DATAGRAMS)
+ netif_stop_queue(dev->netdev);
+
spin_unlock_irqrestore(&dev->lock, flags);
ptask->max_payload = max_payload;
- INIT_LIST_HEAD(&ptask->pt_link);
+ ptask->enqueued = 0;
fwnet_send_packet(ptask);
return NETDEV_TX_OK;
- fail_unlock:
- spin_unlock_irqrestore(&dev->lock, flags);
fail:
+ spin_unlock_irqrestore(&dev->lock, flags);
+
if (ptask)
kmem_cache_free(fwnet_packet_task_cache, ptask);
net->addr_len = FWNET_ALEN;
net->hard_header_len = FWNET_HLEN;
net->type = ARPHRD_IEEE1394;
- net->tx_queue_len = 10;
+ net->tx_queue_len = FWNET_TX_QUEUE_LEN;
}
/* caller must hold fwnet_device_mutex */
dev->broadcast_rcv_context = NULL;
dev->broadcast_xmt_max_payload = 0;
dev->broadcast_xmt_datagramlabel = 0;
-
dev->local_fifo = FWNET_NO_FIFO_ADDR;
-
- INIT_LIST_HEAD(&dev->packet_list);
- INIT_LIST_HEAD(&dev->broadcasted_list);
- INIT_LIST_HEAD(&dev->sent_list);
+ dev->queued_datagrams = 0;
INIT_LIST_HEAD(&dev->peer_list);
-
dev->card = card;
dev->netdev = net;
struct fwnet_peer *peer = dev_get_drvdata(_dev);
struct fwnet_device *dev = peer->dev;
struct net_device *net;
- struct fwnet_packet_task *ptask, *pt_next;
+ int i;
mutex_lock(&fwnet_device_mutex);
dev->card);
fw_iso_context_destroy(dev->broadcast_rcv_context);
}
- list_for_each_entry_safe(ptask, pt_next,
- &dev->packet_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
- list_for_each_entry_safe(ptask, pt_next,
- &dev->broadcasted_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
- list_for_each_entry_safe(ptask, pt_next,
- &dev->sent_list, pt_link) {
- dev_kfree_skb_any(ptask->skb);
- kmem_cache_free(fwnet_packet_task_cache, ptask);
- }
+ for (i = 0; dev->queued_datagrams && i < 5; i++)
+ ssleep(1);
+ WARN_ON(dev->queued_datagrams);
list_del(&dev->dev_link);
free_netdev(net);
static char ohci_driver_name[] = KBUILD_MODNAME;
+#define PCI_DEVICE_ID_AGERE_FW643 0x5901
#define PCI_DEVICE_ID_JMICRON_JMB38X_FW 0x2380
#define PCI_DEVICE_ID_TI_TSB12LV22 0x8009
/* In case of multiple matches in ohci_quirks[], only the first one is used. */
static const struct {
- unsigned short vendor, device, flags;
+ unsigned short vendor, device, revision, flags;
} ohci_quirks[] = {
- {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, QUIRK_CYCLE_TIMER |
- QUIRK_RESET_PACKET |
- QUIRK_NO_1394A},
- {PCI_VENDOR_ID_TI, PCI_ANY_ID, QUIRK_RESET_PACKET},
- {PCI_VENDOR_ID_AL, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, QUIRK_NO_MSI},
- {PCI_VENDOR_ID_NEC, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_VIA, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, QUIRK_CYCLE_TIMER},
- {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, QUIRK_BE_HEADERS},
+ {PCI_VENDOR_ID_AL, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_APPLE, PCI_DEVICE_ID_APPLE_UNI_N_FW, PCI_ANY_ID,
+ QUIRK_BE_HEADERS},
+
+ {PCI_VENDOR_ID_ATT, PCI_DEVICE_ID_AGERE_FW643, 6,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_JMICRON, PCI_DEVICE_ID_JMICRON_JMB38X_FW, PCI_ANY_ID,
+ QUIRK_NO_MSI},
+
+ {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER},
+
+ {PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_TSB12LV22, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_RESET_PACKET | QUIRK_NO_1394A},
+
+ {PCI_VENDOR_ID_TI, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_RESET_PACKET},
+
+ {PCI_VENDOR_ID_VIA, PCI_ANY_ID, PCI_ANY_ID,
+ QUIRK_CYCLE_TIMER | QUIRK_NO_MSI},
};
/* This overrides anything that was found in ohci_quirks[]. */
}
for (i = 0; i < ARRAY_SIZE(ohci_quirks); i++)
- if (ohci_quirks[i].vendor == dev->vendor &&
- (ohci_quirks[i].device == dev->device ||
- ohci_quirks[i].device == (unsigned short)PCI_ANY_ID)) {
+ if ((ohci_quirks[i].vendor == dev->vendor) &&
+ (ohci_quirks[i].device == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].device == dev->device) &&
+ (ohci_quirks[i].revision == (unsigned short)PCI_ANY_ID ||
+ ohci_quirks[i].revision >= dev->revision)) {
ohci->quirks = ohci_quirks[i].flags;
break;
}
* registers, see include/linux/cs5535.h.
*/
+static void errata_outl(u32 val, unsigned long addr)
+{
+ /*
+ * According to the CS5536 errata (#36), after suspend
+ * a write to the high bank GPIO register will clear all
+ * non-selected bits; the recommended workaround is a
+ * read-modify-write operation.
+ */
+ val |= inl(addr);
+ outl(val, addr);
+}
+
static void __cs5535_gpio_set(struct cs5535_gpio_chip *chip, unsigned offset,
unsigned int reg)
{
outl(1 << offset, chip->base + reg);
else
/* high bank register */
- outl(1 << (offset - 16), chip->base + 0x80 + reg);
+ errata_outl(1 << (offset - 16), chip->base + 0x80 + reg);
}
void cs5535_gpio_set(unsigned offset, unsigned int reg)
outl(1 << (offset + 16), chip->base + reg);
else
/* high bank register */
- outl(1 << offset, chip->base + 0x80 + reg);
+ errata_outl(1 << offset, chip->base + 0x80 + reg);
}
void cs5535_gpio_clear(unsigned offset, unsigned int reg)
{ DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO", 0 },
{ DRM_MODE_CONNECTOR_LVDS, "LVDS", 0 },
{ DRM_MODE_CONNECTOR_Component, "Component", 0 },
- { DRM_MODE_CONNECTOR_9PinDIN, "9-pin DIN", 0 },
- { DRM_MODE_CONNECTOR_DisplayPort, "DisplayPort", 0 },
- { DRM_MODE_CONNECTOR_HDMIA, "HDMI Type A", 0 },
- { DRM_MODE_CONNECTOR_HDMIB, "HDMI Type B", 0 },
+ { DRM_MODE_CONNECTOR_9PinDIN, "DIN", 0 },
+ { DRM_MODE_CONNECTOR_DisplayPort, "DP", 0 },
+ { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A", 0 },
+ { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B", 0 },
{ DRM_MODE_CONNECTOR_TV, "TV", 0 },
- { DRM_MODE_CONNECTOR_eDP, "Embedded DisplayPort", 0 },
+ { DRM_MODE_CONNECTOR_eDP, "eDP", 0 },
};
static struct drm_prop_enum_list drm_encoder_enum_list[] =
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
- if (!drm_helper_encoder_in_use(encoder)) {
+ if (encoder->crtc && !drm_helper_encoder_in_use(encoder)) {
drm_encoder_disable(encoder);
/* disconnector encoder from any connector */
encoder->crtc = NULL;
int count = 0, ro, fail = 0;
struct drm_crtc_helper_funcs *crtc_funcs;
int ret = 0;
+ int i;
DRM_DEBUG_KMS("\n");
if (ret != 0)
goto fail;
}
+ DRM_DEBUG_KMS("Setting connector DPMS state to on\n");
+ for (i = 0; i < set->num_connectors; i++) {
+ DRM_DEBUG_KMS("\t[CONNECTOR:%d:%s] set DPMS on\n", set->connectors[i]->base.id,
+ drm_get_connector_name(set->connectors[i]));
+ set->connectors[i]->dpms = DRM_MODE_DPMS_ON;
+ }
kfree(save_connectors);
kfree(save_encoders);
struct delayed_work *delayed_work = to_delayed_work(work);
struct drm_device *dev = container_of(delayed_work, struct drm_device, mode_config.output_poll_work);
struct drm_connector *connector;
- enum drm_connector_status old_status, status;
+ enum drm_connector_status old_status;
bool repoll = false, changed = false;
if (!drm_kms_helper_poll)
!(connector->polled & DRM_CONNECTOR_POLL_HPD))
continue;
- status = connector->funcs->detect(connector, false);
- if (old_status != status)
+ connector->status = connector->funcs->detect(connector, false);
+ DRM_DEBUG_KMS("connector status updated to %d\n", connector->status);
+ if (old_status != connector->status)
changed = true;
}
struct timeval now;
unsigned long flags;
unsigned int seq;
+ int ret;
e = kzalloc(sizeof *e, GFP_KERNEL);
- if (e == NULL)
- return -ENOMEM;
+ if (e == NULL) {
+ ret = -ENOMEM;
+ goto err_put;
+ }
e->pipe = pipe;
e->base.pid = current->pid;
spin_lock_irqsave(&dev->event_lock, flags);
if (file_priv->event_space < sizeof e->event) {
- spin_unlock_irqrestore(&dev->event_lock, flags);
- kfree(e);
- return -ENOMEM;
+ ret = -EBUSY;
+ goto err_unlock;
}
file_priv->event_space -= sizeof e->event;
if ((seq - vblwait->request.sequence) <= (1 << 23)) {
e->event.tv_sec = now.tv_sec;
e->event.tv_usec = now.tv_usec;
- drm_vblank_put(dev, e->pipe);
+ drm_vblank_put(dev, pipe);
list_add_tail(&e->base.link, &e->base.file_priv->event_list);
wake_up_interruptible(&e->base.file_priv->event_wait);
trace_drm_vblank_event_delivered(current->pid, pipe,
spin_unlock_irqrestore(&dev->event_lock, flags);
return 0;
+
+err_unlock:
+ spin_unlock_irqrestore(&dev->event_lock, flags);
+ kfree(e);
+err_put:
+ drm_vblank_put(dev, pipe);
+ return ret;
}
/**
case I915_PARAM_HAS_BLT:
value = HAS_BLT(dev);
break;
+ case I915_PARAM_HAS_COHERENT_RINGS:
+ value = 1;
+ break;
default:
DRM_DEBUG_DRIVER("Unknown parameter %d\n",
param->param);
static uint32_t i915_gem_get_gtt_alignment(struct drm_gem_object *obj);
-static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined);
+static int i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_gtt_write_domain(struct drm_gem_object *obj);
static void i915_gem_object_flush_cpu_write_domain(struct drm_gem_object *obj);
static int i915_gem_object_set_to_cpu_domain(struct drm_gem_object *obj,
if (reg->gpu) {
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
/** Flushes any GPU write domain for the object if it's dirty. */
static int
-i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj,
- bool pipelined)
+i915_gem_object_flush_gpu_write_domain(struct drm_gem_object *obj)
{
struct drm_device *dev = obj->dev;
uint32_t old_write_domain;
obj->read_domains,
old_write_domain);
- if (pipelined)
- return 0;
-
- return i915_gem_object_wait_rendering(obj, true);
+ return 0;
}
/** Flushes the GTT write domain for the object if it's dirty. */
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_cpu_write_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
if (obj_priv->gtt_space == NULL)
return -EINVAL;
- ret = i915_gem_object_flush_gpu_write_domain(obj, true);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret)
return ret;
uint32_t old_write_domain, old_read_domains;
int ret;
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
i915_gem_object_flush_gtt_write_domain(obj);
*/
i915_gem_object_set_to_full_cpu_read_domain(obj);
- if (write) {
- ret = i915_gem_object_wait_rendering(obj, true);
- if (ret)
- return ret;
- }
-
old_write_domain = obj->write_domain;
old_read_domains = obj->read_domains;
if (offset == 0 && size == obj->size)
return i915_gem_object_set_to_cpu_domain(obj, 0);
- ret = i915_gem_object_flush_gpu_write_domain(obj, false);
+ ret = i915_gem_object_flush_gpu_write_domain(obj);
if (ret != 0)
return ret;
+ ret = i915_gem_object_wait_rendering(obj, true);
+ if (ret)
+ return ret;
+
i915_gem_object_flush_gtt_write_domain(obj);
/* If we're already fully in the CPU read domain, we're done. */
return 0;
}
-/**
- * Pin an object to the GTT and evaluate the relocations landing in it.
- */
static int
-i915_gem_execbuffer_relocate(struct drm_i915_gem_object *obj,
- struct drm_file *file_priv,
- struct drm_i915_gem_exec_object2 *entry)
+i915_gem_execbuffer_relocate_entry(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *reloc)
{
struct drm_device *dev = obj->base.dev;
- drm_i915_private_t *dev_priv = dev->dev_private;
- struct drm_i915_gem_relocation_entry __user *user_relocs;
- struct drm_gem_object *target_obj = NULL;
- uint32_t target_handle = 0;
- int i, ret = 0;
+ struct drm_gem_object *target_obj;
+ uint32_t target_offset;
+ int ret = -EINVAL;
- user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
- for (i = 0; i < entry->relocation_count; i++) {
- struct drm_i915_gem_relocation_entry reloc;
- uint32_t target_offset;
+ target_obj = drm_gem_object_lookup(dev, file_priv,
+ reloc->target_handle);
+ if (target_obj == NULL)
+ return -ENOENT;
- if (__copy_from_user_inatomic(&reloc,
- user_relocs+i,
- sizeof(reloc))) {
- ret = -EFAULT;
- break;
- }
+ target_offset = to_intel_bo(target_obj)->gtt_offset;
- if (reloc.target_handle != target_handle) {
- drm_gem_object_unreference(target_obj);
+#if WATCH_RELOC
+ DRM_INFO("%s: obj %p offset %08x target %d "
+ "read %08x write %08x gtt %08x "
+ "presumed %08x delta %08x\n",
+ __func__,
+ obj,
+ (int) reloc->offset,
+ (int) reloc->target_handle,
+ (int) reloc->read_domains,
+ (int) reloc->write_domain,
+ (int) target_offset,
+ (int) reloc->presumed_offset,
+ reloc->delta);
+#endif
- target_obj = drm_gem_object_lookup(dev, file_priv,
- reloc.target_handle);
- if (target_obj == NULL) {
- ret = -ENOENT;
- break;
- }
+ /* The target buffer should have appeared before us in the
+ * exec_object list, so it should have a GTT space bound by now.
+ */
+ if (target_offset == 0) {
+ DRM_ERROR("No GTT space found for object %d\n",
+ reloc->target_handle);
+ goto err;
+ }
- target_handle = reloc.target_handle;
- }
- target_offset = to_intel_bo(target_obj)->gtt_offset;
+ /* Validate that the target is in a valid r/w GPU domain */
+ if (reloc->write_domain & (reloc->write_domain - 1)) {
+ DRM_ERROR("reloc with multiple write domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain & I915_GEM_DOMAIN_CPU ||
+ reloc->read_domains & I915_GEM_DOMAIN_CPU) {
+ DRM_ERROR("reloc with read/write CPU domains: "
+ "obj %p target %d offset %d "
+ "read %08x write %08x",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->read_domains,
+ reloc->write_domain);
+ goto err;
+ }
+ if (reloc->write_domain && target_obj->pending_write_domain &&
+ reloc->write_domain != target_obj->pending_write_domain) {
+ DRM_ERROR("Write domain conflict: "
+ "obj %p target %d offset %d "
+ "new %08x old %08x\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ reloc->write_domain,
+ target_obj->pending_write_domain);
+ goto err;
+ }
-#if WATCH_RELOC
- DRM_INFO("%s: obj %p offset %08x target %d "
- "read %08x write %08x gtt %08x "
- "presumed %08x delta %08x\n",
- __func__,
- obj,
- (int) reloc.offset,
- (int) reloc.target_handle,
- (int) reloc.read_domains,
- (int) reloc.write_domain,
- (int) target_offset,
- (int) reloc.presumed_offset,
- reloc.delta);
-#endif
+ target_obj->pending_read_domains |= reloc->read_domains;
+ target_obj->pending_write_domain |= reloc->write_domain;
- /* The target buffer should have appeared before us in the
- * exec_object list, so it should have a GTT space bound by now.
- */
- if (target_offset == 0) {
- DRM_ERROR("No GTT space found for object %d\n",
- reloc.target_handle);
- ret = -EINVAL;
- break;
- }
+ /* If the relocation already has the right value in it, no
+ * more work needs to be done.
+ */
+ if (target_offset == reloc->presumed_offset)
+ goto out;
- /* Validate that the target is in a valid r/w GPU domain */
- if (reloc.write_domain & (reloc.write_domain - 1)) {
- DRM_ERROR("reloc with multiple write domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain & I915_GEM_DOMAIN_CPU ||
- reloc.read_domains & I915_GEM_DOMAIN_CPU) {
- DRM_ERROR("reloc with read/write CPU domains: "
- "obj %p target %d offset %d "
- "read %08x write %08x",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.read_domains,
- reloc.write_domain);
- ret = -EINVAL;
- break;
- }
- if (reloc.write_domain && target_obj->pending_write_domain &&
- reloc.write_domain != target_obj->pending_write_domain) {
- DRM_ERROR("Write domain conflict: "
- "obj %p target %d offset %d "
- "new %08x old %08x\n",
- obj, reloc.target_handle,
- (int) reloc.offset,
- reloc.write_domain,
- target_obj->pending_write_domain);
- ret = -EINVAL;
- break;
- }
+ /* Check that the relocation address is valid... */
+ if (reloc->offset > obj->base.size - 4) {
+ DRM_ERROR("Relocation beyond object bounds: "
+ "obj %p target %d offset %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset,
+ (int) obj->base.size);
+ goto err;
+ }
+ if (reloc->offset & 3) {
+ DRM_ERROR("Relocation not 4-byte aligned: "
+ "obj %p target %d offset %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->offset);
+ goto err;
+ }
- target_obj->pending_read_domains |= reloc.read_domains;
- target_obj->pending_write_domain |= reloc.write_domain;
+ /* and points to somewhere within the target object. */
+ if (reloc->delta >= target_obj->size) {
+ DRM_ERROR("Relocation beyond target object bounds: "
+ "obj %p target %d delta %d size %d.\n",
+ obj, reloc->target_handle,
+ (int) reloc->delta,
+ (int) target_obj->size);
+ goto err;
+ }
- /* If the relocation already has the right value in it, no
- * more work needs to be done.
- */
- if (target_offset == reloc.presumed_offset)
- continue;
+ reloc->delta += target_offset;
+ if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
+ uint32_t page_offset = reloc->offset & ~PAGE_MASK;
+ char *vaddr;
- /* Check that the relocation address is valid... */
- if (reloc.offset > obj->base.size - 4) {
- DRM_ERROR("Relocation beyond object bounds: "
- "obj %p target %d offset %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset, (int) obj->base.size);
- ret = -EINVAL;
- break;
- }
- if (reloc.offset & 3) {
- DRM_ERROR("Relocation not 4-byte aligned: "
- "obj %p target %d offset %d.\n",
- obj, reloc.target_handle,
- (int) reloc.offset);
- ret = -EINVAL;
- break;
- }
+ vaddr = kmap_atomic(obj->pages[reloc->offset >> PAGE_SHIFT]);
+ *(uint32_t *)(vaddr + page_offset) = reloc->delta;
+ kunmap_atomic(vaddr);
+ } else {
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ uint32_t __iomem *reloc_entry;
+ void __iomem *reloc_page;
- /* and points to somewhere within the target object. */
- if (reloc.delta >= target_obj->size) {
- DRM_ERROR("Relocation beyond target object bounds: "
- "obj %p target %d delta %d size %d.\n",
- obj, reloc.target_handle,
- (int) reloc.delta, (int) target_obj->size);
- ret = -EINVAL;
- break;
- }
+ ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
+ if (ret)
+ goto err;
- reloc.delta += target_offset;
- if (obj->base.write_domain == I915_GEM_DOMAIN_CPU) {
- uint32_t page_offset = reloc.offset & ~PAGE_MASK;
- char *vaddr;
+ /* Map the page containing the relocation we're going to perform. */
+ reloc->offset += obj->gtt_offset;
+ reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
+ reloc->offset & PAGE_MASK);
+ reloc_entry = (uint32_t __iomem *)
+ (reloc_page + (reloc->offset & ~PAGE_MASK));
+ iowrite32(reloc->delta, reloc_entry);
+ io_mapping_unmap_atomic(reloc_page);
+ }
- vaddr = kmap_atomic(obj->pages[reloc.offset >> PAGE_SHIFT]);
- *(uint32_t *)(vaddr + page_offset) = reloc.delta;
- kunmap_atomic(vaddr);
- } else {
- uint32_t __iomem *reloc_entry;
- void __iomem *reloc_page;
+ /* and update the user's relocation entry */
+ reloc->presumed_offset = target_offset;
- ret = i915_gem_object_set_to_gtt_domain(&obj->base, 1);
- if (ret)
- break;
+out:
+ ret = 0;
+err:
+ drm_gem_object_unreference(target_obj);
+ return ret;
+}
- /* Map the page containing the relocation we're going to perform. */
- reloc.offset += obj->gtt_offset;
- reloc_page = io_mapping_map_atomic_wc(dev_priv->mm.gtt_mapping,
- reloc.offset & PAGE_MASK);
- reloc_entry = (uint32_t __iomem *)
- (reloc_page + (reloc.offset & ~PAGE_MASK));
- iowrite32(reloc.delta, reloc_entry);
- io_mapping_unmap_atomic(reloc_page);
- }
+static int
+i915_gem_execbuffer_relocate_object(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry)
+{
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+ int i, ret;
+
+ user_relocs = (void __user *)(uintptr_t)entry->relocs_ptr;
+ for (i = 0; i < entry->relocation_count; i++) {
+ struct drm_i915_gem_relocation_entry reloc;
+
+ if (__copy_from_user_inatomic(&reloc,
+ user_relocs+i,
+ sizeof(reloc)))
+ return -EFAULT;
+
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &reloc);
+ if (ret)
+ return ret;
- /* and update the user's relocation entry */
- reloc.presumed_offset = target_offset;
if (__copy_to_user_inatomic(&user_relocs[i].presumed_offset,
- &reloc.presumed_offset,
- sizeof(reloc.presumed_offset))) {
- ret = -EFAULT;
- break;
- }
+ &reloc.presumed_offset,
+ sizeof(reloc.presumed_offset)))
+ return -EFAULT;
}
- drm_gem_object_unreference(target_obj);
- return ret;
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_relocate_object_slow(struct drm_i915_gem_object *obj,
+ struct drm_file *file_priv,
+ struct drm_i915_gem_exec_object2 *entry,
+ struct drm_i915_gem_relocation_entry *relocs)
+{
+ int i, ret;
+
+ for (i = 0; i < entry->relocation_count; i++) {
+ ret = i915_gem_execbuffer_relocate_entry(obj, file_priv, entry, &relocs[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int
-i915_gem_execbuffer_pin(struct drm_device *dev,
- struct drm_file *file,
- struct drm_gem_object **object_list,
- struct drm_i915_gem_exec_object2 *exec_list,
- int count)
+i915_gem_execbuffer_relocate(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ int i, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object(obj, file,
+ &exec_list[i]);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int
+i915_gem_execbuffer_reserve(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
{
struct drm_i915_private *dev_priv = dev->dev_private;
int ret, i, retry;
return 0;
}
+static int
+i915_gem_execbuffer_relocate_slow(struct drm_device *dev,
+ struct drm_file *file,
+ struct drm_gem_object **object_list,
+ struct drm_i915_gem_exec_object2 *exec_list,
+ int count)
+{
+ struct drm_i915_gem_relocation_entry *reloc;
+ int i, total, ret;
+
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->in_execbuffer = false;
+ }
+
+ mutex_unlock(&dev->struct_mutex);
+
+ total = 0;
+ for (i = 0; i < count; i++)
+ total += exec_list[i].relocation_count;
+
+ reloc = drm_malloc_ab(total, sizeof(*reloc));
+ if (reloc == NULL) {
+ mutex_lock(&dev->struct_mutex);
+ return -ENOMEM;
+ }
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_relocation_entry __user *user_relocs;
+
+ user_relocs = (void __user *)(uintptr_t)exec_list[i].relocs_ptr;
+
+ if (copy_from_user(reloc+total, user_relocs,
+ exec_list[i].relocation_count *
+ sizeof(*reloc))) {
+ ret = -EFAULT;
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ total += exec_list[i].relocation_count;
+ }
+
+ ret = i915_mutex_lock_interruptible(dev);
+ if (ret) {
+ mutex_lock(&dev->struct_mutex);
+ goto err;
+ }
+
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ count);
+ if (ret)
+ goto err;
+
+ total = 0;
+ for (i = 0; i < count; i++) {
+ struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
+ obj->base.pending_read_domains = 0;
+ obj->base.pending_write_domain = 0;
+ ret = i915_gem_execbuffer_relocate_object_slow(obj, file,
+ &exec_list[i],
+ reloc + total);
+ if (ret)
+ goto err;
+
+ total += exec_list[i].relocation_count;
+ }
+
+ /* Leave the user relocations as are, this is the painfully slow path,
+ * and we want to avoid the complication of dropping the lock whilst
+ * having buffers reserved in the aperture and so causing spurious
+ * ENOSPC for random operations.
+ */
+
+err:
+ drm_free_large(reloc);
+ return ret;
+}
+
static int
i915_gem_execbuffer_move_to_gpu(struct drm_device *dev,
struct drm_file *file,
for (i = 0; i < count; i++) {
char __user *ptr = (char __user *)(uintptr_t)exec[i].relocs_ptr;
- size_t length = exec[i].relocation_count * sizeof(struct drm_i915_gem_relocation_entry);
+ int length; /* limited by fault_in_pages_readable() */
+
+ /* First check for malicious input causing overflow */
+ if (exec[i].relocation_count >
+ INT_MAX / sizeof(struct drm_i915_gem_relocation_entry))
+ return -EINVAL;
+ length = exec[i].relocation_count *
+ sizeof(struct drm_i915_gem_relocation_entry);
if (!access_ok(VERIFY_READ, ptr, length))
return -EFAULT;
}
/* Move the objects en-masse into the GTT, evicting if necessary. */
- ret = i915_gem_execbuffer_pin(dev, file,
- object_list, exec_list,
- args->buffer_count);
+ ret = i915_gem_execbuffer_reserve(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
if (ret)
goto err;
/* The objects are in their final locations, apply the relocations. */
- for (i = 0; i < args->buffer_count; i++) {
- struct drm_i915_gem_object *obj = to_intel_bo(object_list[i]);
- obj->base.pending_read_domains = 0;
- obj->base.pending_write_domain = 0;
- ret = i915_gem_execbuffer_relocate(obj, file, &exec_list[i]);
+ ret = i915_gem_execbuffer_relocate(dev, file,
+ object_list, exec_list,
+ args->buffer_count);
+ if (ret) {
+ if (ret == -EFAULT) {
+ ret = i915_gem_execbuffer_relocate_slow(dev, file,
+ object_list,
+ exec_list,
+ args->buffer_count);
+ BUG_ON(!mutex_is_locked(&dev->struct_mutex));
+ }
if (ret)
goto err;
}
* use this buffer rather sooner than later, so issuing the required
* flush earlier is beneficial.
*/
- if (obj->write_domain & I915_GEM_GPU_DOMAINS)
+ if (obj->write_domain & I915_GEM_GPU_DOMAINS) {
i915_gem_flush_ring(dev, file_priv,
obj_priv->ring,
0, obj->write_domain);
+ } else if (obj_priv->ring->outstanding_lazy_request) {
+ /* This ring is not being cleared by active usage,
+ * so emit a request to do so.
+ */
+ u32 seqno = i915_add_request(dev,
+ NULL, NULL,
+ obj_priv->ring);
+ if (seqno == 0)
+ ret = -ENOMEM;
+ }
/* Update the active list for the hardware's current position.
* Otherwise this only updates on a delayed timer or when irqs
#define TRANS_DP_10BPC (1<<9)
#define TRANS_DP_6BPC (2<<9)
#define TRANS_DP_12BPC (3<<9)
+#define TRANS_DP_BPC_MASK (3<<9)
#define TRANS_DP_VSYNC_ACTIVE_HIGH (1<<4)
#define TRANS_DP_VSYNC_ACTIVE_LOW 0
#define TRANS_DP_HSYNC_ACTIVE_HIGH (1<<3)
if (drm_core_check_feature(dev, DRIVER_MODESET))
return;
+ /* Cursor state */
+ dev_priv->saveCURACNTR = I915_READ(CURACNTR);
+ dev_priv->saveCURAPOS = I915_READ(CURAPOS);
+ dev_priv->saveCURABASE = I915_READ(CURABASE);
+ dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
+ dev_priv->saveCURBPOS = I915_READ(CURBPOS);
+ dev_priv->saveCURBBASE = I915_READ(CURBBASE);
+ if (IS_GEN2(dev))
+ dev_priv->saveCURSIZE = I915_READ(CURSIZE);
+
if (HAS_PCH_SPLIT(dev)) {
dev_priv->savePCH_DREF_CONTROL = I915_READ(PCH_DREF_CONTROL);
dev_priv->saveDISP_ARB_CTL = I915_READ(DISP_ARB_CTL);
I915_WRITE(DSPBCNTR, dev_priv->saveDSPBCNTR);
I915_WRITE(DSPBADDR, I915_READ(DSPBADDR));
+ /* Cursor state */
+ I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
+ I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
+ I915_WRITE(CURABASE, dev_priv->saveCURABASE);
+ I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
+ I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
+ I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
+ if (IS_GEN2(dev))
+ I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
+
return;
}
/* Don't save them in KMS mode */
i915_save_modeset_reg(dev);
- /* Cursor state */
- dev_priv->saveCURACNTR = I915_READ(CURACNTR);
- dev_priv->saveCURAPOS = I915_READ(CURAPOS);
- dev_priv->saveCURABASE = I915_READ(CURABASE);
- dev_priv->saveCURBCNTR = I915_READ(CURBCNTR);
- dev_priv->saveCURBPOS = I915_READ(CURBPOS);
- dev_priv->saveCURBBASE = I915_READ(CURBBASE);
- if (IS_GEN2(dev))
- dev_priv->saveCURSIZE = I915_READ(CURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev)) {
dev_priv->saveADPA = I915_READ(PCH_ADPA);
/* Don't restore them in KMS mode */
i915_restore_modeset_reg(dev);
- /* Cursor state */
- I915_WRITE(CURAPOS, dev_priv->saveCURAPOS);
- I915_WRITE(CURACNTR, dev_priv->saveCURACNTR);
- I915_WRITE(CURABASE, dev_priv->saveCURABASE);
- I915_WRITE(CURBPOS, dev_priv->saveCURBPOS);
- I915_WRITE(CURBCNTR, dev_priv->saveCURBCNTR);
- I915_WRITE(CURBBASE, dev_priv->saveCURBBASE);
- if (IS_GEN2(dev))
- I915_WRITE(CURSIZE, dev_priv->saveCURSIZE);
-
/* CRT state */
if (HAS_PCH_SPLIT(dev))
I915_WRITE(PCH_ADPA, dev_priv->saveADPA);
kfree(output.pointer);
}
-static int intel_dsm_switchto(enum vga_switcheroo_client_id id)
-{
- return 0;
-}
-
-static int intel_dsm_power_state(enum vga_switcheroo_client_id id,
- enum vga_switcheroo_state state)
-{
- return 0;
-}
-
-static int intel_dsm_init(void)
-{
- return 0;
-}
-
-static int intel_dsm_get_client_id(struct pci_dev *pdev)
-{
- if (intel_dsm_priv.dhandle == DEVICE_ACPI_HANDLE(&pdev->dev))
- return VGA_SWITCHEROO_IGD;
- else
- return VGA_SWITCHEROO_DIS;
-}
-
-static struct vga_switcheroo_handler intel_dsm_handler = {
- .switchto = intel_dsm_switchto,
- .power_state = intel_dsm_power_state,
- .init = intel_dsm_init,
- .get_client_id = intel_dsm_get_client_id,
-};
-
static bool intel_dsm_pci_probe(struct pci_dev *pdev)
{
acpi_handle dhandle, intel_handle;
{
if (!intel_dsm_detect())
return;
-
- vga_switcheroo_register_handler(&intel_dsm_handler);
}
void intel_unregister_dsm_handler(void)
{
- vga_switcheroo_unregister_handler();
}
reg = TRANS_DP_CTL(pipe);
temp = I915_READ(reg);
temp &= ~(TRANS_DP_PORT_SEL_MASK |
- TRANS_DP_SYNC_MASK);
+ TRANS_DP_SYNC_MASK |
+ TRANS_DP_BPC_MASK);
temp |= (TRANS_DP_OUTPUT_ENABLE |
TRANS_DP_ENH_FRAMING);
+ temp |= TRANS_DP_8BPC;
if (crtc->mode.flags & DRM_MODE_FLAG_PHSYNC)
temp |= TRANS_DP_HSYNC_ACTIVE_HIGH;
}
}
-#define DATA_N 0x800000
-#define LINK_N 0x80000
-
static void
ironlake_compute_m_n(int bits_per_pixel, int nlanes, int pixel_clock,
int link_clock, struct fdi_m_n *m_n)
{
- u64 temp;
-
m_n->tu = 64; /* default size */
- temp = (u64) DATA_N * pixel_clock;
- temp = div_u64(temp, link_clock);
- m_n->gmch_m = div_u64(temp * bits_per_pixel, nlanes);
- m_n->gmch_m >>= 3; /* convert to bytes_per_pixel */
- m_n->gmch_n = DATA_N;
+ /* BUG_ON(pixel_clock > INT_MAX / 36); */
+ m_n->gmch_m = bits_per_pixel * pixel_clock;
+ m_n->gmch_n = link_clock * nlanes * 8;
fdi_reduce_ratio(&m_n->gmch_m, &m_n->gmch_n);
- temp = (u64) LINK_N * pixel_clock;
- m_n->link_m = div_u64(temp, link_clock);
- m_n->link_n = LINK_N;
+ m_n->link_m = pixel_clock;
+ m_n->link_n = link_clock;
fdi_reduce_ratio(&m_n->link_m, &m_n->link_n);
}
/* FDI link */
if (HAS_PCH_SPLIT(dev)) {
+ int pixel_multiplier = intel_mode_get_pixel_multiplier(adjusted_mode);
int lane = 0, link_bw, bpp;
/* CPU eDP doesn't require FDI link, so just set DP M/N
according to current link config */
intel_crtc->fdi_lanes = lane;
+ if (pixel_multiplier > 1)
+ link_bw *= pixel_multiplier;
ironlake_compute_m_n(bpp, lane, target_clock, link_bw, &m_n);
}
.page_flip = intel_crtc_page_flip,
};
+static void intel_sanitize_modesetting(struct drm_device *dev,
+ int pipe, int plane)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 reg, val;
+
+ if (HAS_PCH_SPLIT(dev))
+ return;
+
+ /* Who knows what state these registers were left in by the BIOS or
+ * grub?
+ *
+ * If we leave the registers in a conflicting state (e.g. with the
+ * display plane reading from the other pipe than the one we intend
+ * to use) then when we attempt to teardown the active mode, we will
+ * not disable the pipes and planes in the correct order -- leaving
+ * a plane reading from a disabled pipe and possibly leading to
+ * undefined behaviour.
+ */
+
+ reg = DSPCNTR(plane);
+ val = I915_READ(reg);
+
+ if ((val & DISPLAY_PLANE_ENABLE) == 0)
+ return;
+ if (!!(val & DISPPLANE_SEL_PIPE_MASK) == pipe)
+ return;
+
+ /* This display plane is active and attached to the other CPU pipe. */
+ pipe = !pipe;
+
+ /* Disable the plane and wait for it to stop reading from the pipe. */
+ I915_WRITE(reg, val & ~DISPLAY_PLANE_ENABLE);
+ intel_flush_display_plane(dev, plane);
+
+ if (IS_GEN2(dev))
+ intel_wait_for_vblank(dev, pipe);
+
+ if (pipe == 0 && (dev_priv->quirks & QUIRK_PIPEA_FORCE))
+ return;
+
+ /* Switch off the pipe. */
+ reg = PIPECONF(pipe);
+ val = I915_READ(reg);
+ if (val & PIPECONF_ENABLE) {
+ I915_WRITE(reg, val & ~PIPECONF_ENABLE);
+ intel_wait_for_pipe_off(dev, pipe);
+ }
+}
static void intel_crtc_init(struct drm_device *dev, int pipe)
{
setup_timer(&intel_crtc->idle_timer, intel_crtc_idle_timer,
(unsigned long)intel_crtc);
+
+ intel_sanitize_modesetting(dev, intel_crtc->pipe, intel_crtc->plane);
}
int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_encoder *encoder;
bool dpd_is_edp = false;
+ bool has_lvds = false;
if (IS_MOBILE(dev) && !IS_I830(dev))
- intel_lvds_init(dev);
+ has_lvds = intel_lvds_init(dev);
+ if (!has_lvds && !HAS_PCH_SPLIT(dev)) {
+ /* disable the panel fitter on everything but LVDS */
+ I915_WRITE(PFIT_CONTROL, 0);
+ }
if (HAS_PCH_SPLIT(dev)) {
dpd_is_edp = intel_dpd_is_edp(dev);
mode->clock = dev_priv->panel_fixed_mode->clock;
}
- /* Just use VBT values for eDP */
- if (is_edp(intel_dp)) {
- intel_dp->lane_count = dev_priv->edp.lanes;
- intel_dp->link_bw = dev_priv->edp.rate;
- adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
- DRM_DEBUG_KMS("eDP link bw %02x lane count %d clock %d\n",
- intel_dp->link_bw, intel_dp->lane_count,
- adjusted_mode->clock);
- return true;
- }
-
for (lane_count = 1; lane_count <= max_lane_count; lane_count <<= 1) {
for (clock = 0; clock <= max_clock; clock++) {
int link_avail = intel_dp_max_data_rate(intel_dp_link_clock(bws[clock]), lane_count);
}
}
+ if (is_edp(intel_dp)) {
+ /* okay we failed just pick the highest */
+ intel_dp->lane_count = max_lane_count;
+ intel_dp->link_bw = bws[max_clock];
+ adjusted_mode->clock = intel_dp_link_clock(intel_dp->link_bw);
+ DRM_DEBUG_KMS("Force picking display port link bw %02x lane "
+ "count %d clock %d\n",
+ intel_dp->link_bw, intel_dp->lane_count,
+ adjusted_mode->clock);
+
+ return true;
+ }
+
return false;
}
}
static uint32_t
-intel_dp_signal_levels(struct intel_dp *intel_dp)
+intel_dp_signal_levels(uint8_t train_set, int lane_count)
{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- uint32_t signal_levels = 0;
- u8 train_set = intel_dp->train_set[0];
- u32 vswing = train_set & DP_TRAIN_VOLTAGE_SWING_MASK;
- u32 preemphasis = train_set & DP_TRAIN_PRE_EMPHASIS_MASK;
+ uint32_t signal_levels = 0;
- if (is_edp(intel_dp)) {
- vswing = dev_priv->edp.vswing;
- preemphasis = dev_priv->edp.preemphasis;
- }
-
- switch (vswing) {
+ switch (train_set & DP_TRAIN_VOLTAGE_SWING_MASK) {
case DP_TRAIN_VOLTAGE_SWING_400:
default:
signal_levels |= DP_VOLTAGE_0_4;
signal_levels |= DP_VOLTAGE_1_2;
break;
}
- switch (preemphasis) {
+ switch (train_set & DP_TRAIN_PRE_EMPHASIS_MASK) {
case DP_TRAIN_PRE_EMPHASIS_0:
default:
signal_levels |= DP_PRE_EMPHASIS_0;
return true;
}
-static bool
-intel_dp_aux_handshake_required(struct intel_dp *intel_dp)
-{
- struct drm_device *dev = intel_dp->base.base.dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
-
- if (is_edp(intel_dp) && dev_priv->no_aux_handshake)
- return false;
-
- return true;
-}
-
static bool
intel_dp_set_link_train(struct intel_dp *intel_dp,
uint32_t dp_reg_value,
I915_WRITE(intel_dp->output_reg, dp_reg_value);
POSTING_READ(intel_dp->output_reg);
- if (!intel_dp_aux_handshake_required(intel_dp))
- return true;
-
intel_dp_aux_native_write_1(intel_dp,
DP_TRAINING_PATTERN_SET,
dp_train_pat);
POSTING_READ(intel_dp->output_reg);
intel_wait_for_vblank(dev, intel_crtc->pipe);
- if (intel_dp_aux_handshake_required(intel_dp))
- /* Write the link configuration data */
- intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
- intel_dp->link_configuration,
- DP_LINK_CONFIGURATION_SIZE);
+ /* Write the link configuration data */
+ intel_dp_aux_native_write(intel_dp, DP_LINK_BW_SET,
+ intel_dp->link_configuration,
+ DP_LINK_CONFIGURATION_SIZE);
DP |= DP_PORT_EN;
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
break;
/* Set training pattern 1 */
- udelay(500);
- if (intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(100);
+ if (!intel_dp_get_link_status(intel_dp))
+ break;
+
+ if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
+ clock_recovery = true;
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
+ }
- if (intel_clock_recovery_ok(intel_dp->link_status, intel_dp->lane_count)) {
- clock_recovery = true;
+ /* Check to see if we've tried the max voltage */
+ for (i = 0; i < intel_dp->lane_count; i++)
+ if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
break;
- }
+ if (i == intel_dp->lane_count)
+ break;
- /* Check to see if we've tried the max voltage */
- for (i = 0; i < intel_dp->lane_count; i++)
- if ((intel_dp->train_set[i] & DP_TRAIN_MAX_SWING_REACHED) == 0)
- break;
- if (i == intel_dp->lane_count)
+ /* Check to see if we've tried the same voltage 5 times */
+ if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
+ ++tries;
+ if (tries == 5)
break;
+ } else
+ tries = 0;
+ voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
- /* Check to see if we've tried the same voltage 5 times */
- if ((intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK) == voltage) {
- ++tries;
- if (tries == 5)
- break;
- } else
- tries = 0;
- voltage = intel_dp->train_set[0] & DP_TRAIN_VOLTAGE_SWING_MASK;
-
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
- }
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
}
intel_dp->DP = DP;
signal_levels = intel_gen6_edp_signal_levels(intel_dp->train_set[0]);
DP = (DP & ~EDP_LINK_TRAIN_VOL_EMP_MASK_SNB) | signal_levels;
} else {
- signal_levels = intel_dp_signal_levels(intel_dp);
+ signal_levels = intel_dp_signal_levels(intel_dp->train_set[0], intel_dp->lane_count);
DP = (DP & ~(DP_VOLTAGE_MASK|DP_PRE_EMPHASIS_MASK)) | signal_levels;
}
DP_TRAINING_PATTERN_2))
break;
- udelay(500);
-
- if (!intel_dp_aux_handshake_required(intel_dp)) {
+ udelay(400);
+ if (!intel_dp_get_link_status(intel_dp))
break;
- } else {
- if (!intel_dp_get_link_status(intel_dp))
- break;
- if (intel_channel_eq_ok(intel_dp)) {
- channel_eq = true;
- break;
- }
+ if (intel_channel_eq_ok(intel_dp)) {
+ channel_eq = true;
+ break;
+ }
- /* Try 5 times */
- if (tries > 5)
- break;
+ /* Try 5 times */
+ if (tries > 5)
+ break;
- /* Compute new intel_dp->train_set as requested by target */
- intel_get_adjust_train(intel_dp);
- ++tries;
- }
+ /* Compute new intel_dp->train_set as requested by target */
+ intel_get_adjust_train(intel_dp);
+ ++tries;
}
+
if (HAS_PCH_CPT(dev) && !is_edp(intel_dp))
reg = DP | DP_LINK_TRAIN_OFF_CPT;
else
struct drm_i915_private *dev_priv = dev->dev_private;
uint32_t DP = intel_dp->DP;
+ if ((I915_READ(intel_dp->output_reg) & DP_PORT_EN) == 0)
+ return;
+
DRM_DEBUG_KMS("\n");
if (is_edp(intel_dp)) {
if (is_edp(intel_dp))
DP |= DP_LINK_TRAIN_OFF;
+
+ if (!HAS_PCH_CPT(dev) &&
+ I915_READ(intel_dp->output_reg) & DP_PIPEB_SELECT) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(intel_dp->base.base.crtc);
+ /* Hardware workaround: leaving our transcoder select
+ * set to transcoder B while it's off will prevent the
+ * corresponding HDMI output on transcoder A.
+ *
+ * Combine this with another hardware workaround:
+ * transcoder select bit can only be cleared while the
+ * port is enabled.
+ */
+ DP &= ~DP_PIPEB_SELECT;
+ I915_WRITE(intel_dp->output_reg, DP);
+
+ /* Changes to enable or select take place the vblank
+ * after being written.
+ */
+ intel_wait_for_vblank(intel_dp->base.base.dev,
+ intel_crtc->pipe);
+ }
+
I915_WRITE(intel_dp->output_reg, DP & ~DP_PORT_EN);
POSTING_READ(intel_dp->output_reg);
}
extern void intel_dvo_init(struct drm_device *dev);
extern void intel_tv_init(struct drm_device *dev);
extern void intel_mark_busy(struct drm_device *dev, struct drm_gem_object *obj);
-extern void intel_lvds_init(struct drm_device *dev);
+extern bool intel_lvds_init(struct drm_device *dev);
extern void intel_dp_init(struct drm_device *dev, int dp_reg);
void
intel_dp_set_m_n(struct drm_crtc *crtc, struct drm_display_mode *mode,
/**
* Sets the power state for the panel.
*/
-static void intel_lvds_set_power(struct intel_lvds *intel_lvds, bool on)
+static void intel_lvds_enable(struct intel_lvds *intel_lvds)
{
struct drm_device *dev = intel_lvds->base.base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
lvds_reg = LVDS;
}
- if (on) {
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
- intel_panel_set_backlight(dev, dev_priv->backlight_level);
- } else {
- dev_priv->backlight_level = intel_panel_get_backlight(dev);
-
- intel_panel_set_backlight(dev, 0);
- I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) | LVDS_PORT_EN);
- if (intel_lvds->pfit_control) {
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(PFIT_CONTROL, 0);
- intel_lvds->pfit_control = 0;
+ if (intel_lvds->pfit_dirty) {
+ /*
+ * Enable automatic panel scaling so that non-native modes
+ * fill the screen. The panel fitter should only be
+ * adjusted whilst the pipe is disabled, according to
+ * register description and PRM.
+ */
+ DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
+ intel_lvds->pfit_control,
+ intel_lvds->pfit_pgm_ratios);
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000)) {
+ DRM_ERROR("timed out waiting for panel to power off\n");
+ } else {
+ I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
+ I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
intel_lvds->pfit_dirty = false;
}
+ }
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) | POWER_TARGET_ON);
+ POSTING_READ(lvds_reg);
+
+ intel_panel_set_backlight(dev, dev_priv->backlight_level);
+}
+
+static void intel_lvds_disable(struct intel_lvds *intel_lvds)
+{
+ struct drm_device *dev = intel_lvds->base.base.dev;
+ struct drm_i915_private *dev_priv = dev->dev_private;
+ u32 ctl_reg, lvds_reg;
+
+ if (HAS_PCH_SPLIT(dev)) {
+ ctl_reg = PCH_PP_CONTROL;
+ lvds_reg = PCH_LVDS;
+ } else {
+ ctl_reg = PP_CONTROL;
+ lvds_reg = LVDS;
+ }
+
+ dev_priv->backlight_level = intel_panel_get_backlight(dev);
+ intel_panel_set_backlight(dev, 0);
+
+ I915_WRITE(ctl_reg, I915_READ(ctl_reg) & ~POWER_TARGET_ON);
+
+ if (intel_lvds->pfit_control) {
+ if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
+ DRM_ERROR("timed out waiting for panel to power off\n");
- I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
+ I915_WRITE(PFIT_CONTROL, 0);
+ intel_lvds->pfit_dirty = true;
}
+
+ I915_WRITE(lvds_reg, I915_READ(lvds_reg) & ~LVDS_PORT_EN);
POSTING_READ(lvds_reg);
}
struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
if (mode == DRM_MODE_DPMS_ON)
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
else
- intel_lvds_set_power(intel_lvds, false);
+ intel_lvds_disable(intel_lvds);
/* XXX: We never power down the LVDS pairs. */
}
/* Always do a full power on as we do not know what state
* we were left in.
*/
- intel_lvds_set_power(intel_lvds, true);
+ intel_lvds_enable(intel_lvds);
}
static void intel_lvds_mode_set(struct drm_encoder *encoder,
struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
{
- struct drm_device *dev = encoder->dev;
- struct drm_i915_private *dev_priv = dev->dev_private;
- struct intel_lvds *intel_lvds = to_intel_lvds(encoder);
-
/*
* The LVDS pin pair will already have been turned on in the
* intel_crtc_mode_set since it has a large impact on the DPLL
* settings.
*/
-
- if (HAS_PCH_SPLIT(dev))
- return;
-
- if (!intel_lvds->pfit_dirty)
- return;
-
- /*
- * Enable automatic panel scaling so that non-native modes fill the
- * screen. Should be enabled before the pipe is enabled, according to
- * register description and PRM.
- */
- DRM_DEBUG_KMS("applying panel-fitter: %x, %x\n",
- intel_lvds->pfit_control,
- intel_lvds->pfit_pgm_ratios);
- if (wait_for((I915_READ(PP_STATUS) & PP_ON) == 0, 1000))
- DRM_ERROR("timed out waiting for panel to power off\n");
-
- I915_WRITE(PFIT_PGM_RATIOS, intel_lvds->pfit_pgm_ratios);
- I915_WRITE(PFIT_CONTROL, intel_lvds->pfit_control);
- intel_lvds->pfit_dirty = false;
}
/**
* Create the connector, register the LVDS DDC bus, and try to figure out what
* modes we can display on the LVDS panel (if present).
*/
-void intel_lvds_init(struct drm_device *dev)
+bool intel_lvds_init(struct drm_device *dev)
{
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_lvds *intel_lvds;
/* Skip init on machines we know falsely report LVDS */
if (dmi_check_system(intel_no_lvds))
- return;
+ return false;
pin = GMBUS_PORT_PANEL;
if (!lvds_is_present_in_vbt(dev, &pin)) {
DRM_DEBUG_KMS("LVDS is not present in VBT\n");
- return;
+ return false;
}
if (HAS_PCH_SPLIT(dev)) {
if ((I915_READ(PCH_LVDS) & LVDS_DETECTED) == 0)
- return;
+ return false;
if (dev_priv->edp.support) {
DRM_DEBUG_KMS("disable LVDS for eDP support\n");
- return;
+ return false;
}
}
if (!intel_lvds_ddc_probe(dev, pin)) {
DRM_DEBUG_KMS("LVDS did not respond to DDC probe\n");
- return;
+ return false;
}
intel_lvds = kzalloc(sizeof(struct intel_lvds), GFP_KERNEL);
if (!intel_lvds) {
- return;
+ return false;
}
intel_connector = kzalloc(sizeof(struct intel_connector), GFP_KERNEL);
if (!intel_connector) {
kfree(intel_lvds);
- return;
+ return false;
}
if (!HAS_PCH_SPLIT(dev)) {
/* keep the LVDS connector */
dev_priv->int_lvds_connector = connector;
drm_sysfs_connector_add(connector);
- return;
+ return true;
failed:
DRM_DEBUG_KMS("No LVDS modes found, disabling.\n");
drm_encoder_cleanup(encoder);
kfree(intel_lvds);
kfree(intel_connector);
+ return false;
}
/* G45 ring initialization fails to reset head to zero */
if (head != 0) {
- DRM_ERROR("%s head not reset to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ DRM_DEBUG_KMS("%s head not reset to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
I915_WRITE_HEAD(ring, 0);
- DRM_ERROR("%s head forced to zero "
- "ctl %08x head %08x tail %08x start %08x\n",
- ring->name,
- I915_READ_CTL(ring),
- I915_READ_HEAD(ring),
- I915_READ_TAIL(ring),
- I915_READ_START(ring));
+ if (I915_READ_HEAD(ring) & HEAD_ADDR) {
+ DRM_ERROR("failed to set %s head to zero "
+ "ctl %08x head %08x tail %08x start %08x\n",
+ ring->name,
+ I915_READ_CTL(ring),
+ I915_READ_HEAD(ring),
+ I915_READ_TAIL(ring),
+ I915_READ_START(ring));
+ }
}
I915_WRITE_CTL(ring,
* This is set if we treat the device as HDMI, instead of DVI.
*/
bool is_hdmi;
- bool has_audio;
+ bool has_hdmi_monitor;
+ bool has_hdmi_audio;
/**
* This is set if we detect output of sdvo device as LVDS and
if (!intel_sdvo_set_target_input(intel_sdvo))
return;
- if (intel_sdvo->is_hdmi &&
+ if (intel_sdvo->has_hdmi_monitor &&
!intel_sdvo_set_avi_infoframe(intel_sdvo))
return;
}
if (intel_crtc->pipe == 1)
sdvox |= SDVO_PIPE_B_SELECT;
- if (intel_sdvo->has_audio)
+ if (intel_sdvo->has_hdmi_audio)
sdvox |= SDVO_AUDIO_ENABLE;
if (INTEL_INFO(dev)->gen >= 4) {
return drm_get_edid(connector, &sdvo->ddc);
}
-static struct drm_connector *
-intel_find_analog_connector(struct drm_device *dev)
-{
- struct drm_connector *connector;
- struct intel_sdvo *encoder;
-
- list_for_each_entry(encoder,
- &dev->mode_config.encoder_list,
- base.base.head) {
- if (encoder->base.type == INTEL_OUTPUT_ANALOG) {
- list_for_each_entry(connector,
- &dev->mode_config.connector_list,
- head) {
- if (&encoder->base ==
- intel_attached_encoder(connector))
- return connector;
- }
- }
- }
-
- return NULL;
-}
-
-static int
-intel_analog_is_connected(struct drm_device *dev)
-{
- struct drm_connector *analog_connector;
-
- analog_connector = intel_find_analog_connector(dev);
- if (!analog_connector)
- return false;
-
- if (analog_connector->funcs->detect(analog_connector, false) ==
- connector_status_disconnected)
- return false;
-
- return true;
-}
-
/* Mac mini hack -- use the same DDC as the analog connector */
static struct edid *
intel_sdvo_get_analog_edid(struct drm_connector *connector)
{
struct drm_i915_private *dev_priv = connector->dev->dev_private;
- if (!intel_analog_is_connected(connector->dev))
- return NULL;
-
- return drm_get_edid(connector, &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
+ return drm_get_edid(connector,
+ &dev_priv->gmbus[dev_priv->crt_ddc_pin].adapter);
}
enum drm_connector_status
/* DDC bus is shared, match EDID to connector type */
if (edid->input & DRM_EDID_INPUT_DIGITAL) {
status = connector_status_connected;
- intel_sdvo->is_hdmi = drm_detect_hdmi_monitor(edid);
- intel_sdvo->has_audio = drm_detect_monitor_audio(edid);
+ if (intel_sdvo->is_hdmi) {
+ intel_sdvo->has_hdmi_monitor = drm_detect_hdmi_monitor(edid);
+ intel_sdvo->has_hdmi_audio = drm_detect_monitor_audio(edid);
+ }
}
connector->display_info.raw_edid = NULL;
kfree(edid);
if (status == connector_status_connected) {
struct intel_sdvo_connector *intel_sdvo_connector = to_intel_sdvo_connector(connector);
if (intel_sdvo_connector->force_audio)
- intel_sdvo->has_audio = intel_sdvo_connector->force_audio > 0;
+ intel_sdvo->has_hdmi_audio = intel_sdvo_connector->force_audio > 0;
}
return status;
if (!intel_sdvo_write_cmd(intel_sdvo,
SDVO_CMD_GET_ATTACHED_DISPLAYS, NULL, 0))
return connector_status_unknown;
- if (intel_sdvo->is_tv) {
- /* add 30ms delay when the output type is SDVO-TV */
+
+ /* add 30ms delay when the output type might be TV */
+ if (intel_sdvo->caps.output_flags &
+ (SDVO_OUTPUT_SVID0 | SDVO_OUTPUT_CVBS0))
mdelay(30);
- }
+
if (!intel_sdvo_read_response(intel_sdvo, &response, 2))
return connector_status_unknown;
edid = intel_sdvo_get_analog_edid(connector);
if (edid != NULL) {
- drm_mode_connector_update_edid_property(connector, edid);
- drm_add_edid_modes(connector, edid);
+ if (edid->input & DRM_EDID_INPUT_DIGITAL) {
+ drm_mode_connector_update_edid_property(connector, edid);
+ drm_add_edid_modes(connector, edid);
+ }
connector->display_info.raw_edid = NULL;
kfree(edid);
}
intel_sdvo_connector->force_audio = val;
- if (val > 0 && intel_sdvo->has_audio)
+ if (val > 0 && intel_sdvo->has_hdmi_audio)
return 0;
- if (val < 0 && !intel_sdvo->has_audio)
+ if (val < 0 && !intel_sdvo->has_hdmi_audio)
return 0;
- intel_sdvo->has_audio = val > 0;
+ intel_sdvo->has_hdmi_audio = val > 0;
goto done;
}
intel_sdvo_set_colorimetry(intel_sdvo,
SDVO_COLORIMETRY_RGB256);
connector->connector_type = DRM_MODE_CONNECTOR_HDMIA;
+
+ intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
intel_sdvo->is_hdmi = true;
}
intel_sdvo->base.clone_mask = ((1 << INTEL_SDVO_NON_TV_CLONE_BIT) |
intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo);
- intel_sdvo_add_hdmi_properties(intel_sdvo_connector);
-
return true;
}
base += 3;
break;
case ATOM_IIO_WRITE:
+ (void)ctx->card->ioreg_read(ctx->card, CU16(base + 1));
ctx->card->ioreg_write(ctx->card, CU16(base + 1), temp);
base += 3;
break;
u32 tmp;
/* flush hdp cache so updates hit vram */
- if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740)) {
+ if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
+ !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->gart.table.vram.ptr;
u32 tmp;
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
* rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
WREG32(HDP_DEBUG1, 0);
tmp = readl((void __iomem *)ptr);
mc->vram_end, mc->real_vram_size >> 20);
} else {
u64 base = 0;
- if (rdev->flags & RADEON_IS_IGP)
- base = (RREG32(MC_VM_FB_LOCATION) & 0xFFFF) << 24;
+ if (rdev->flags & RADEON_IS_IGP) {
+ base = RREG32(MC_VM_FB_LOCATION) & 0xFFFF;
+ base <<= 24;
+ }
radeon_vram_location(rdev, &rdev->mc, base);
rdev->mc.gtt_base_align = 0;
radeon_gtt_location(rdev, mc);
void r600_ioctl_wait_idle(struct radeon_device *rdev, struct radeon_bo *bo)
{
/* r7xx hw bug. write to HDP_DEBUG1 followed by fb read
- * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL
+ * rather than write to HDP_REG_COHERENCY_FLUSH_CNTL.
+ * This seems to cause problems on some AGP cards. Just use the old
+ * method for them.
*/
if ((rdev->family >= CHIP_RV770) && (rdev->family <= CHIP_RV740) &&
- rdev->vram_scratch.ptr) {
+ rdev->vram_scratch.ptr && !(rdev->flags & RADEON_IS_AGP)) {
void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp;
if (array_mode == V_0280A0_ARRAY_LINEAR_GENERAL) {
/* the initial DDX does bad things with the CB size occasionally */
/* it rounds up height too far for slice tile max but the BO is smaller */
- tmp = (height - 7) * pitch * bpe;
+ tmp = (height - 7) * 8 * bpe;
if ((tmp + track->cb_color_bo_offset[i]) > radeon_bo_size(track->cb_color_bo[i])) {
dev_warn(p->dev, "%s offset[%d] %d %d %lu too big\n", __func__, i, track->cb_color_bo_offset[i], tmp, radeon_bo_size(track->cb_color_bo[i]));
return -EINVAL;
#define R600_HDP_NONSURFACE_BASE 0x2c04
#define R600_BUS_CNTL 0x5420
+# define R600_BIOS_ROM_DIS (1 << 1)
#define R600_CONFIG_CNTL 0x5424
#define R600_CONFIG_MEMSIZE 0x5428
#define R600_CONFIG_F0_BASE 0x542C
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
if (gpio->sucI2cId.ucAccess == id) {
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
}
}
+ /* some DCE3 boards have bad data for this entry */
+ if (ASIC_IS_DCE3(rdev)) {
+ if ((i == 4) &&
+ (gpio->usClkMaskRegisterIndex == 0x1fda) &&
+ (gpio->sucI2cId.ucAccess == 0x94))
+ gpio->sucI2cId.ucAccess = 0x14;
+ }
+
i2c.mask_clk_reg = le16_to_cpu(gpio->usClkMaskRegisterIndex) * 4;
i2c.mask_data_reg = le16_to_cpu(gpio->usDataMaskRegisterIndex) * 4;
i2c.en_clk_reg = le16_to_cpu(gpio->usClkEnRegisterIndex) * 4;
}
return true;
}
+
static bool r700_read_disabled_bios(struct radeon_device *rdev)
{
uint32_t viph_control;
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
cg_spll_status = RREG32(R600_CG_SPLL_STATUS);
}
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
bool r;
viph_control = RREG32(RADEON_VIPH_CONTROL);
- bus_cntl = RREG32(RADEON_BUS_CNTL);
+ bus_cntl = RREG32(R600_BUS_CNTL);
d1vga_control = RREG32(AVIVO_D1VGA_CONTROL);
d2vga_control = RREG32(AVIVO_D2VGA_CONTROL);
vga_render_control = RREG32(AVIVO_VGA_RENDER_CONTROL);
/* disable VIP */
WREG32(RADEON_VIPH_CONTROL, (viph_control & ~RADEON_VIPH_EN));
/* enable the rom */
- WREG32(RADEON_BUS_CNTL, (bus_cntl & ~RADEON_BUS_BIOS_DIS_ROM));
+ WREG32(R600_BUS_CNTL, (bus_cntl & ~R600_BIOS_ROM_DIS));
/* Disable VGA mode */
WREG32(AVIVO_D1VGA_CONTROL,
(d1vga_control & ~(AVIVO_DVGA_CONTROL_MODE_ENABLE |
/* restore regs */
WREG32(RADEON_VIPH_CONTROL, viph_control);
- WREG32(RADEON_BUS_CNTL, bus_cntl);
+ WREG32(R600_BUS_CNTL, bus_cntl);
WREG32(AVIVO_D1VGA_CONTROL, d1vga_control);
WREG32(AVIVO_D2VGA_CONTROL, d2vga_control);
WREG32(AVIVO_VGA_RENDER_CONTROL, vga_render_control);
clk = RBIOS8(offset + 3 + (i * 5) + 3);
data = RBIOS8(offset + 3 + (i * 5) + 4);
i2c = combios_setup_i2c_bus(rdev, DDC_MONID,
- clk, data);
+ (1 << clk), (1 << data));
rdev->i2c_bus[4] = radeon_i2c_create(dev, &i2c, "GPIOPAD_MASK");
break;
}
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
rdev->mode_info.load_detect_property,
1);
}
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_HDMIA:
case DRM_MODE_CONNECTOR_HDMIB:
0);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_HDMIB)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_DisplayPort:
case DRM_MODE_CONNECTOR_eDP:
rdev->mode_info.underscan_vborder_property,
0);
}
+ connector->interlace_allowed = true;
+ /* in theory with a DP to VGA converter... */
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
radeon_atombios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
radeon_dig_connector = kzalloc(sizeof(struct radeon_connector_atom_dig), GFP_KERNEL);
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
connector->polled = DRM_CONNECTOR_POLL_CONNECT;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVIA:
drm_connector_init(dev, &radeon_connector->base, &radeon_vga_connector_funcs, connector_type);
1);
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = true;
+ connector->doublescan_allowed = true;
break;
case DRM_MODE_CONNECTOR_DVII:
case DRM_MODE_CONNECTOR_DVID:
1);
}
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = true;
+ if (connector_type == DRM_MODE_CONNECTOR_DVII)
+ connector->doublescan_allowed = true;
+ else
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_SVIDEO:
case DRM_MODE_CONNECTOR_Composite:
radeon_combios_get_tv_info(rdev));
/* no HPD on analog connectors */
radeon_connector->hpd.hpd = RADEON_HPD_NONE;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
case DRM_MODE_CONNECTOR_LVDS:
drm_connector_init(dev, &radeon_connector->base, &radeon_lvds_connector_funcs, connector_type);
dev->mode_config.scaling_mode_property,
DRM_MODE_SCALE_FULLSCREEN);
subpixel_order = SubPixelHorizontalRGB;
+ connector->interlace_allowed = false;
+ connector->doublescan_allowed = false;
break;
}
mc->mc_vram_size = mc->aper_size;
}
mc->vram_end = mc->vram_start + mc->mc_vram_size - 1;
- dev_info(rdev->dev, "VRAM: %lluM 0x%08llX - 0x%08llX (%lluM used)\n",
+ dev_info(rdev->dev, "VRAM: %lluM 0x%016llX - 0x%016llX (%lluM used)\n",
mc->mc_vram_size >> 20, mc->vram_start,
mc->vram_end, mc->real_vram_size >> 20);
}
mc->gtt_start = (mc->vram_end + 1 + mc->gtt_base_align) & ~mc->gtt_base_align;
}
mc->gtt_end = mc->gtt_start + mc->gtt_size - 1;
- dev_info(rdev->dev, "GTT: %lluM 0x%08llX - 0x%08llX\n",
+ dev_info(rdev->dev, "GTT: %lluM 0x%016llX - 0x%016llX\n",
mc->gtt_size >> 20, mc->gtt_start, mc->gtt_end);
}
u32 c = 0;
rbo->placement.fpfn = 0;
- rbo->placement.lpfn = rbo->rdev->mc.active_vram_size >> PAGE_SHIFT;
+ rbo->placement.lpfn = 0;
rbo->placement.placement = rbo->placements;
rbo->placement.busy_placement = rbo->placements;
if (domain & RADEON_GEM_DOMAIN_VRAM)
{
struct radeon_bo *bo;
enum ttm_bo_type type;
- int page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long page_align = roundup(byte_align, PAGE_SIZE) >> PAGE_SHIFT;
+ unsigned long max_size = 0;
int r;
if (unlikely(rdev->mman.bdev.dev_mapping == NULL)) {
}
*bo_ptr = NULL;
+ /* maximun bo size is the minimun btw visible vram and gtt size */
+ max_size = min(rdev->mc.visible_vram_size, rdev->mc.gtt_size);
+ if ((page_align << PAGE_SHIFT) >= max_size) {
+ printk(KERN_WARNING "%s:%d alloc size %ldM bigger than %ldMb limit\n",
+ __func__, __LINE__, page_align >> (20 - PAGE_SHIFT), max_size >> 20);
+ return -ENOMEM;
+ }
+
retry:
bo = kzalloc(sizeof(struct radeon_bo), GFP_KERNEL);
if (bo == NULL)
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb651) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb653) },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED, USB_DEVICE_ID_TOPSEED_CYBERLINK) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TOPSEED2, USB_DEVICE_ID_TOPSEED2_RF_COMBO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_TWINHAN, USB_DEVICE_ID_TWINHAN_IR_REMOTE) },
struct egalax_data *td;
struct hid_report *report;
- td = kmalloc(sizeof(struct egalax_data), GFP_KERNEL);
+ td = kzalloc(sizeof(struct egalax_data), GFP_KERNEL);
if (!td) {
dev_err(&hdev->dev, "cannot allocate eGalax data\n");
return -ENOMEM;
clear_bit(*old_keycode, dev->keybit);
set_bit(usage->code, dev->keybit);
- dbg_hid(KERN_DEBUG "Assigned keycode %d to HID usage code %x\n",
+ dbg_hid("Assigned keycode %d to HID usage code %x\n",
usage->code, usage->hid);
/*
*
* as seen in the HID specification v1.11 6.2.2.7 Global Items.
*
- * Only exponent 1 length units are processed. Centimeters are converted to
- * inches. Degrees are converted to radians.
+ * Only exponent 1 length units are processed. Centimeters and inches are
+ * converted to millimeters. Degrees are converted to radians.
*/
static __s32 hidinput_calc_abs_res(const struct hid_field *field, __u16 code)
{
*/
if (code == ABS_X || code == ABS_Y || code == ABS_Z) {
if (field->unit == 0x11) { /* If centimeters */
- /* Convert to inches */
- prev = logical_extents;
- logical_extents *= 254;
- if (logical_extents < prev)
+ /* Convert to millimeters */
+ unit_exponent += 1;
+ } else if (field->unit == 0x13) { /* If inches */
+ /* Convert to millimeters */
+ prev = physical_extents;
+ physical_extents *= 254;
+ if (physical_extents < prev)
return 0;
- unit_exponent += 2;
- } else if (field->unit != 0x13) { /* If not inches */
+ unit_exponent -= 1;
+ } else {
return 0;
}
} else if (code == ABS_RX || code == ABS_RY || code == ABS_RZ) {
.driver_data = (unsigned long)ff_joystick },
{ HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb654), /* FGT Force Feedback Wheel */
.driver_data = (unsigned long)ff_joystick },
+ { HID_USB_DEVICE(USB_VENDOR_ID_THRUSTMASTER, 0xb65a), /* F430 Force Feedback Wheel */
+ .driver_data = (unsigned long)ff_joystick },
{ }
};
MODULE_DEVICE_TABLE(hid, tm_devices);
int nr = sensor_attr->index;
struct i2c_client *client = to_i2c_client(dev);
struct adm1026_data *data = i2c_get_clientdata(client);
- int val, orig_div, new_div, shift;
+ int val, orig_div, new_div;
val = simple_strtol(buf, NULL, 10);
new_div = DIV_TO_REG(val);
- if (new_div == 0) {
- return -EINVAL;
- }
+
mutex_lock(&data->update_lock);
orig_div = data->fan_div[nr];
data->fan_div[nr] = DIV_FROM_REG(new_div);
if (nr < 4) { /* 0 <= nr < 4 */
- shift = 2 * nr;
adm1026_write_value(client, ADM1026_REG_FAN_DIV_0_3,
- ((DIV_TO_REG(orig_div) & (~(0x03 << shift))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[0]) << 0) |
+ (DIV_TO_REG(data->fan_div[1]) << 2) |
+ (DIV_TO_REG(data->fan_div[2]) << 4) |
+ (DIV_TO_REG(data->fan_div[3]) << 6));
} else { /* 3 < nr < 8 */
- shift = 2 * (nr - 4);
adm1026_write_value(client, ADM1026_REG_FAN_DIV_4_7,
- ((DIV_TO_REG(orig_div) & (~(0x03 << (2 * shift)))) |
- (new_div << shift)));
+ (DIV_TO_REG(data->fan_div[4]) << 0) |
+ (DIV_TO_REG(data->fan_div[5]) << 2) |
+ (DIV_TO_REG(data->fan_div[6]) << 4) |
+ (DIV_TO_REG(data->fan_div[7]) << 6));
}
if (data->fan_div[nr] != orig_div) {
#define IT87_REG_FAN_MAIN_CTRL 0x13
#define IT87_REG_FAN_CTL 0x14
#define IT87_REG_PWM(nr) (0x15 + (nr))
+#define IT87_REG_PWM_DUTY(nr) (0x63 + (nr) * 8)
#define IT87_REG_VIN(nr) (0x20 + (nr))
#define IT87_REG_TEMP(nr) (0x29 + (nr))
u8 fan_main_ctrl; /* Register value */
u8 fan_ctl; /* Register value */
- /* The following 3 arrays correspond to the same registers. The
- * meaning of bits 6-0 depends on the value of bit 7, and we want
- * to preserve settings on mode changes, so we have to track all
- * values separately. */
+ /* The following 3 arrays correspond to the same registers up to
+ * the IT8720F. The meaning of bits 6-0 depends on the value of bit
+ * 7, and we want to preserve settings on mode changes, so we have
+ * to track all values separately.
+ * Starting with the IT8721F, the manual PWM duty cycles are stored
+ * in separate registers (8-bit values), so the separate tracking
+ * is no longer needed, but it is still done to keep the driver
+ * simple. */
u8 pwm_ctrl[3]; /* Register value */
- u8 pwm_duty[3]; /* Manual PWM value set by user (bit 6-0) */
+ u8 pwm_duty[3]; /* Manual PWM value set by user */
u8 pwm_temp_map[3]; /* PWM to temp. chan. mapping (bits 1-0) */
/* Automatic fan speed control registers */
data->fan_main_ctrl);
} else {
if (val == 1) /* Manual mode */
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ data->pwm_ctrl[nr] = data->type == it8721 ?
+ data->pwm_temp_map[nr] :
+ data->pwm_duty[nr];
else /* Automatic mode */
data->pwm_ctrl[nr] = 0x80 | data->pwm_temp_map[nr];
it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
return -EINVAL;
mutex_lock(&data->update_lock);
- data->pwm_duty[nr] = pwm_to_reg(data, val);
- /* If we are in manual mode, write the duty cycle immediately;
- * otherwise, just store it for later use. */
- if (!(data->pwm_ctrl[nr] & 0x80)) {
- data->pwm_ctrl[nr] = data->pwm_duty[nr];
- it87_write_value(data, IT87_REG_PWM(nr), data->pwm_ctrl[nr]);
+ if (data->type == it8721) {
+ /* If we are in automatic mode, the PWM duty cycle register
+ * is read-only so we can't write the value */
+ if (data->pwm_ctrl[nr] & 0x80) {
+ mutex_unlock(&data->update_lock);
+ return -EBUSY;
+ }
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ it87_write_value(data, IT87_REG_PWM_DUTY(nr),
+ data->pwm_duty[nr]);
+ } else {
+ data->pwm_duty[nr] = pwm_to_reg(data, val);
+ /* If we are in manual mode, write the duty cycle immediately;
+ * otherwise, just store it for later use. */
+ if (!(data->pwm_ctrl[nr] & 0x80)) {
+ data->pwm_ctrl[nr] = data->pwm_duty[nr];
+ it87_write_value(data, IT87_REG_PWM(nr),
+ data->pwm_ctrl[nr]);
+ }
}
mutex_unlock(&data->update_lock);
return count;
* channels to use when later setting to automatic mode later.
* Use a 1:1 mapping by default (we are clueless.)
* In both cases, the value can (and should) be changed by the user
- * prior to switching to a different mode. */
+ * prior to switching to a different mode.
+ * Note that this is no longer needed for the IT8721F and later, as
+ * these have separate registers for the temperature mapping and the
+ * manual duty cycle. */
for (i = 0; i < 3; i++) {
data->pwm_temp_map[i] = i;
data->pwm_duty[i] = 0x7f; /* Full speed */
static void it87_update_pwm_ctrl(struct it87_data *data, int nr)
{
data->pwm_ctrl[nr] = it87_read_value(data, IT87_REG_PWM(nr));
- if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ if (data->type == it8721) {
data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
- else /* Manual mode */
- data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ data->pwm_duty[nr] = it87_read_value(data,
+ IT87_REG_PWM_DUTY(nr));
+ } else {
+ if (data->pwm_ctrl[nr] & 0x80) /* Automatic mode */
+ data->pwm_temp_map[nr] = data->pwm_ctrl[nr] & 0x03;
+ else /* Manual mode */
+ data->pwm_duty[nr] = data->pwm_ctrl[nr] & 0x7f;
+ }
if (has_old_autopwm(data)) {
int i;
/* Power (virtual) */
LTC4215_POWER(power1_input);
-LTC4215_ALARM(power1_alarm, (1 << 3), LTC4215_STATUS);
/* Input Voltage */
LTC4215_VOLTAGE(in1_input, LTC4215_ADIN);
/* Output Voltage */
LTC4215_VOLTAGE(in2_input, LTC4215_SOURCE);
+LTC4215_ALARM(in2_min_alarm, (1 << 3), LTC4215_STATUS);
/* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
&sensor_dev_attr_curr1_max_alarm.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
- &sensor_dev_attr_power1_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
+ &sensor_dev_attr_in2_min_alarm.dev_attr.attr,
NULL,
};
In doubt, say Y.
config I2C_SMBUS
- tristate
- prompt "SMBus-specific protocols" if !I2C_HELPER_AUTO
+ tristate "SMBus-specific protocols" if !I2C_HELPER_AUTO
help
Say Y here if you want support for SMBus extensions to the I2C
specification. At the moment, the only supported extension is
#
menu "I2C Algorithms"
- depends on !I2C_HELPER_AUTO
+ visible if !I2C_HELPER_AUTO
config I2C_ALGOBIT
tristate "I2C bit-banging interfaces"
tristate "I2C PCA 9564 interfaces"
endmenu
-
-# In automatic configuration mode, we still have to define the
-# symbols to avoid unmet dependencies.
-
-if I2C_HELPER_AUTO
-config I2C_ALGOBIT
- tristate
-config I2C_ALGOPCF
- tristate
-config I2C_ALGOPCA
- tristate
-endif
/* Initialize struct members */
snprintf(mrst->adap.name, sizeof(mrst->adap.name),
- "MRST/Medfield I2C at %lx", start);
+ "Intel MID I2C at %lx", start);
mrst->adap.owner = THIS_MODULE;
mrst->adap.algo = &intel_mid_i2c_algorithm;
mrst->adap.dev.parent = &dev->dev;
pr_debug(PREFIX "MWAIT substates: 0x%x\n", mwait_substates);
- if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
- lapic_timer_reliable_states = 0xFFFFFFFF;
if (boot_cpu_data.x86 != 6) /* family 6 */
return -ENODEV;
case 0x1F: /* Core i7 and i5 Processor - Nehalem */
case 0x2E: /* Nehalem-EX Xeon */
case 0x2F: /* Westmere-EX Xeon */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
-
case 0x25: /* Westmere */
case 0x2C: /* Westmere */
cpuidle_state_table = nehalem_cstates;
case 0x1C: /* 28 - Atom Processor */
case 0x26: /* 38 - Lincroft Atom Processor */
- lapic_timer_reliable_states = (1 << 1); /* C1 */
cpuidle_state_table = atom_cstates;
break;
case 0x2D: /* SNB Xeon */
cpuidle_state_table = snb_cstates;
break;
-#ifdef FUTURE_USE
- case 0x17: /* 23 - Core 2 Duo */
- lapic_timer_reliable_states = (1 << 2) | (1 << 1); /* C2, C1 */
-#endif
default:
pr_debug(PREFIX "does not run on family %d model %d\n",
return -ENODEV;
}
+ if (boot_cpu_has(X86_FEATURE_ARAT)) /* Always Reliable APIC Timer */
+ lapic_timer_reliable_states = 0xFFFFFFFF;
+
pr_debug(PREFIX "v" INTEL_IDLE_VERSION
" model 0x%X\n", boot_cpu_data.x86_model);
}
EXPORT_SYMBOL(ib_ud_header_init);
-/**
- * ib_lrh_header_pack - Pack LRH header struct into wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_pack() packs the LRH header structure @lrh into
- * wire format in the buffer @buf.
- */
-int ib_lrh_header_pack(struct ib_unpacked_lrh *lrh, void *buf)
-{
- ib_pack(lrh_table, ARRAY_SIZE(lrh_table), lrh, buf);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_pack);
-
-/**
- * ib_lrh_header_unpack - Unpack LRH structure from wire format
- * @lrh:unpacked LRH header struct
- * @buf:Buffer to pack into
- *
- * ib_lrh_header_unpack() unpacks the LRH header structure from
- * wire format (in buf) into @lrh.
- */
-int ib_lrh_header_unpack(void *buf, struct ib_unpacked_lrh *lrh)
-{
- ib_unpack(lrh_table, ARRAY_SIZE(lrh_table), buf, lrh);
- return 0;
-}
-EXPORT_SYMBOL(ib_lrh_header_unpack);
-
/**
* ib_ud_header_pack - Pack UD header struct into wire format
* @header:UD header struct
return ret ? ret : in_len;
}
+static int copy_wc_to_user(void __user *dest, struct ib_wc *wc)
+{
+ struct ib_uverbs_wc tmp;
+
+ tmp.wr_id = wc->wr_id;
+ tmp.status = wc->status;
+ tmp.opcode = wc->opcode;
+ tmp.vendor_err = wc->vendor_err;
+ tmp.byte_len = wc->byte_len;
+ tmp.ex.imm_data = (__u32 __force) wc->ex.imm_data;
+ tmp.qp_num = wc->qp->qp_num;
+ tmp.src_qp = wc->src_qp;
+ tmp.wc_flags = wc->wc_flags;
+ tmp.pkey_index = wc->pkey_index;
+ tmp.slid = wc->slid;
+ tmp.sl = wc->sl;
+ tmp.dlid_path_bits = wc->dlid_path_bits;
+ tmp.port_num = wc->port_num;
+ tmp.reserved = 0;
+
+ if (copy_to_user(dest, &tmp, sizeof tmp))
+ return -EFAULT;
+
+ return 0;
+}
+
ssize_t ib_uverbs_poll_cq(struct ib_uverbs_file *file,
const char __user *buf, int in_len,
int out_len)
{
struct ib_uverbs_poll_cq cmd;
- struct ib_uverbs_poll_cq_resp *resp;
+ struct ib_uverbs_poll_cq_resp resp;
+ u8 __user *header_ptr;
+ u8 __user *data_ptr;
struct ib_cq *cq;
- struct ib_wc *wc;
- int ret = 0;
- int i;
- int rsize;
+ struct ib_wc wc;
+ int ret;
if (copy_from_user(&cmd, buf, sizeof cmd))
return -EFAULT;
- wc = kmalloc(cmd.ne * sizeof *wc, GFP_KERNEL);
- if (!wc)
- return -ENOMEM;
-
- rsize = sizeof *resp + cmd.ne * sizeof(struct ib_uverbs_wc);
- resp = kmalloc(rsize, GFP_KERNEL);
- if (!resp) {
- ret = -ENOMEM;
- goto out_wc;
- }
-
cq = idr_read_cq(cmd.cq_handle, file->ucontext, 0);
- if (!cq) {
- ret = -EINVAL;
- goto out;
- }
+ if (!cq)
+ return -EINVAL;
- resp->count = ib_poll_cq(cq, cmd.ne, wc);
+ /* we copy a struct ib_uverbs_poll_cq_resp to user space */
+ header_ptr = (void __user *)(unsigned long) cmd.response;
+ data_ptr = header_ptr + sizeof resp;
- put_cq_read(cq);
+ memset(&resp, 0, sizeof resp);
+ while (resp.count < cmd.ne) {
+ ret = ib_poll_cq(cq, 1, &wc);
+ if (ret < 0)
+ goto out_put;
+ if (!ret)
+ break;
+
+ ret = copy_wc_to_user(data_ptr, &wc);
+ if (ret)
+ goto out_put;
- for (i = 0; i < resp->count; i++) {
- resp->wc[i].wr_id = wc[i].wr_id;
- resp->wc[i].status = wc[i].status;
- resp->wc[i].opcode = wc[i].opcode;
- resp->wc[i].vendor_err = wc[i].vendor_err;
- resp->wc[i].byte_len = wc[i].byte_len;
- resp->wc[i].ex.imm_data = (__u32 __force) wc[i].ex.imm_data;
- resp->wc[i].qp_num = wc[i].qp->qp_num;
- resp->wc[i].src_qp = wc[i].src_qp;
- resp->wc[i].wc_flags = wc[i].wc_flags;
- resp->wc[i].pkey_index = wc[i].pkey_index;
- resp->wc[i].slid = wc[i].slid;
- resp->wc[i].sl = wc[i].sl;
- resp->wc[i].dlid_path_bits = wc[i].dlid_path_bits;
- resp->wc[i].port_num = wc[i].port_num;
+ data_ptr += sizeof(struct ib_uverbs_wc);
+ ++resp.count;
}
- if (copy_to_user((void __user *) (unsigned long) cmd.response, resp, rsize))
+ if (copy_to_user(header_ptr, &resp, sizeof resp)) {
ret = -EFAULT;
+ goto out_put;
+ }
-out:
- kfree(resp);
+ ret = in_len;
-out_wc:
- kfree(wc);
- return ret ? ret : in_len;
+out_put:
+ put_cq_read(cq);
+ return ret;
}
ssize_t ib_uverbs_req_notify_cq(struct ib_uverbs_file *file,
dst->grh.sgid_index = src->grh.sgid_index;
dst->grh.hop_limit = src->grh.hop_limit;
dst->grh.traffic_class = src->grh.traffic_class;
+ memset(&dst->grh.reserved, 0, sizeof(dst->grh.reserved));
dst->dlid = src->dlid;
dst->sl = src->sl;
dst->src_path_bits = src->src_path_bits;
dst->static_rate = src->static_rate;
dst->is_global = src->ah_flags & IB_AH_GRH ? 1 : 0;
dst->port_num = src->port_num;
+ dst->reserved = 0;
}
EXPORT_SYMBOL(ib_copy_ah_attr_to_user);
void ib_copy_qp_attr_to_user(struct ib_uverbs_qp_attr *dst,
struct ib_qp_attr *src)
{
+ dst->qp_state = src->qp_state;
dst->cur_qp_state = src->cur_qp_state;
dst->path_mtu = src->path_mtu;
dst->path_mig_state = src->path_mig_state;
dst->rnr_retry = src->rnr_retry;
dst->alt_port_num = src->alt_port_num;
dst->alt_timeout = src->alt_timeout;
+ memset(dst->reserved, 0, sizeof(dst->reserved));
}
EXPORT_SYMBOL(ib_copy_qp_attr_to_user);
struct net_device *ndev;
enum ib_mtu tmp;
- props->active_width = IB_WIDTH_4X;
+ props->active_width = IB_WIDTH_1X;
props->active_speed = 4;
props->port_cap_flags = IB_PORT_CM_SUP;
props->gid_tbl_len = to_mdev(ibdev)->dev->caps.gid_table_len[port];
tmp = iboe_get_mtu(ndev->mtu);
props->active_mtu = tmp ? min(props->max_mtu, tmp) : IB_MTU_256;
- props->state = netif_running(ndev) && netif_oper_up(ndev) ?
+ props->state = (netif_running(ndev) && netif_carrier_ok(ndev)) ?
IB_PORT_ACTIVE : IB_PORT_DOWN;
props->phys_state = state_to_phys_state(props->state);
ctrl->fence_size = (wr->send_flags & IB_SEND_FENCE ?
MLX4_WQE_CTRL_FENCE : 0) | size;
+ if (be16_to_cpu(vlan) < 0x1000) {
+ ctrl->ins_vlan = 1 << 6;
+ ctrl->vlan_tag = vlan;
+ }
+
/*
* Make sure descriptor is fully written before
* setting ownership bit (because HW can start
ctrl->owner_opcode = mlx4_ib_opcode[wr->opcode] |
(ind & qp->sq.wqe_cnt ? cpu_to_be32(1 << 31) : 0) | blh;
- if (be16_to_cpu(vlan) < 0x1000) {
- ctrl->ins_vlan = 1 << 6;
- ctrl->vlan_tag = vlan;
- }
-
stamp = ind + qp->sq_spare_wqes;
ind += DIV_ROUND_UP(size * 16, 1U << qp->sq.wqe_shift);
}
#undef OLD_KEY_MAX
-static int evdev_handle_get_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_get_keycode(struct input_dev *dev, void __user *p)
{
- struct input_keymap_entry ke;
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
int error;
- memset(&ke, 0, sizeof(ke));
-
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
+ /* legacy case */
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
+ if (put_user(ke.keycode, ip + 1))
+ return -EFAULT;
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
+ return 0;
+}
- if (put_user(ke.keycode, ip + 1))
- return -EFAULT;
+static int evdev_handle_get_keycode_v2(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke;
+ int error;
- } else {
- size = min(size, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
+ error = input_get_keycode(dev, &ke);
+ if (error)
+ return error;
- error = input_get_keycode(dev, &ke);
- if (error)
- return error;
+ if (copy_to_user(p, &ke, sizeof(ke)))
+ return -EFAULT;
- if (copy_to_user(p, &ke, size))
- return -EFAULT;
- }
return 0;
}
-static int evdev_handle_set_keycode(struct input_dev *dev,
- void __user *p, size_t size)
+static int evdev_handle_set_keycode(struct input_dev *dev, void __user *p)
{
- struct input_keymap_entry ke;
-
- memset(&ke, 0, sizeof(ke));
+ struct input_keymap_entry ke = {
+ .len = sizeof(unsigned int),
+ .flags = 0,
+ };
+ int __user *ip = (int __user *)p;
- if (size == sizeof(unsigned int[2])) {
- /* legacy case */
- int __user *ip = (int __user *)p;
+ if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
+ return -EFAULT;
- if (copy_from_user(ke.scancode, p, sizeof(unsigned int)))
- return -EFAULT;
+ if (get_user(ke.keycode, ip + 1))
+ return -EFAULT;
- if (get_user(ke.keycode, ip + 1))
- return -EFAULT;
+ return input_set_keycode(dev, &ke);
+}
- ke.len = sizeof(unsigned int);
- ke.flags = 0;
+static int evdev_handle_set_keycode_v2(struct input_dev *dev, void __user *p)
+{
+ struct input_keymap_entry ke;
- } else {
- size = min(size, sizeof(ke));
+ if (copy_from_user(&ke, p, sizeof(ke)))
+ return -EFAULT;
- if (copy_from_user(&ke, p, size))
- return -EFAULT;
-
- if (ke.len > sizeof(ke.scancode))
- return -EINVAL;
- }
+ if (ke.len > sizeof(ke.scancode))
+ return -EINVAL;
return input_set_keycode(dev, &ke);
}
return evdev_grab(evdev, client);
else
return evdev_ungrab(evdev, client);
+
+ case EVIOCGKEYCODE:
+ return evdev_handle_get_keycode(dev, p);
+
+ case EVIOCSKEYCODE:
+ return evdev_handle_set_keycode(dev, p);
+
+ case EVIOCGKEYCODE_V2:
+ return evdev_handle_get_keycode_v2(dev, p);
+
+ case EVIOCSKEYCODE_V2:
+ return evdev_handle_set_keycode_v2(dev, p);
}
size = _IOC_SIZE(cmd);
return -EFAULT;
return error;
-
- case EVIOC_MASK_SIZE(EVIOCGKEYCODE):
- return evdev_handle_get_keycode(dev, p, size);
-
- case EVIOC_MASK_SIZE(EVIOCSKEYCODE):
- return evdev_handle_set_keycode(dev, p, size);
}
/* Multi-number variable-length handlers */
goto err_free_tgfx;
}
+ parport_put_port(pp);
return tgfx;
err_free_dev:
To compile this driver as a module, choose M here: the
module will be called gpio_keys.
+config KEYBOARD_GPIO_POLLED
+ tristate "Polled GPIO buttons"
+ depends on GENERIC_GPIO
+ select INPUT_POLLDEV
+ help
+ This driver implements support for buttons connected
+ to GPIO pins that are not capable of generating interrupts.
+
+ Say Y here if your device has buttons connected
+ directly to such GPIO pins. Your board-specific
+ setup logic must also provide a platform device,
+ with configuration data saying which GPIOs are used.
+
+ To compile this driver as a module, choose M here: the
+ module will be called gpio_keys_polled.
+
config KEYBOARD_TCA6416
tristate "TCA6416 Keypad Support"
depends on I2C
obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o
obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o
obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o
+obj-$(CONFIG_KEYBOARD_GPIO_POLLED) += gpio_keys_polled.o
obj-$(CONFIG_KEYBOARD_TCA6416) += tca6416-keypad.o
obj-$(CONFIG_KEYBOARD_HIL) += hil_kbd.o
obj-$(CONFIG_KEYBOARD_HIL_OLD) += hilkbd.o
--- /dev/null
+/*
+ * Driver for buttons on GPIO lines not capable of generating interrupts
+ *
+ * Copyright (C) 2007-2010 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2010 Nuno Goncalves <nunojpg@gmail.com>
+ *
+ * This file was based on: /drivers/input/misc/cobalt_btns.c
+ * Copyright (C) 2007 Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp>
+ *
+ * also was based on: /drivers/input/keyboard/gpio_keys.c
+ * Copyright 2005 Phil Blundell
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/input-polldev.h>
+#include <linux/ioport.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/gpio_keys.h>
+
+#define DRV_NAME "gpio-keys-polled"
+
+struct gpio_keys_button_data {
+ int last_state;
+ int count;
+ int threshold;
+ int can_sleep;
+};
+
+struct gpio_keys_polled_dev {
+ struct input_polled_dev *poll_dev;
+ struct device *dev;
+ struct gpio_keys_platform_data *pdata;
+ struct gpio_keys_button_data data[0];
+};
+
+static void gpio_keys_polled_check_state(struct input_dev *input,
+ struct gpio_keys_button *button,
+ struct gpio_keys_button_data *bdata)
+{
+ int state;
+
+ if (bdata->can_sleep)
+ state = !!gpio_get_value_cansleep(button->gpio);
+ else
+ state = !!gpio_get_value(button->gpio);
+
+ if (state != bdata->last_state) {
+ unsigned int type = button->type ?: EV_KEY;
+
+ input_event(input, type, button->code,
+ !!(state ^ button->active_low));
+ input_sync(input);
+ bdata->count = 0;
+ bdata->last_state = state;
+ }
+}
+
+static void gpio_keys_polled_poll(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ struct input_dev *input = dev->input;
+ int i;
+
+ for (i = 0; i < bdev->pdata->nbuttons; i++) {
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+
+ if (bdata->count < bdata->threshold)
+ bdata->count++;
+ else
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ bdata);
+ }
+}
+
+static void gpio_keys_polled_open(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->enable)
+ pdata->enable(bdev->dev);
+}
+
+static void gpio_keys_polled_close(struct input_polled_dev *dev)
+{
+ struct gpio_keys_polled_dev *bdev = dev->private;
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+
+ if (pdata->disable)
+ pdata->disable(bdev->dev);
+}
+
+static int __devinit gpio_keys_polled_probe(struct platform_device *pdev)
+{
+ struct gpio_keys_platform_data *pdata = pdev->dev.platform_data;
+ struct device *dev = &pdev->dev;
+ struct gpio_keys_polled_dev *bdev;
+ struct input_polled_dev *poll_dev;
+ struct input_dev *input;
+ int error;
+ int i;
+
+ if (!pdata || !pdata->poll_interval)
+ return -EINVAL;
+
+ bdev = kzalloc(sizeof(struct gpio_keys_polled_dev) +
+ pdata->nbuttons * sizeof(struct gpio_keys_button_data),
+ GFP_KERNEL);
+ if (!bdev) {
+ dev_err(dev, "no memory for private data\n");
+ return -ENOMEM;
+ }
+
+ poll_dev = input_allocate_polled_device();
+ if (!poll_dev) {
+ dev_err(dev, "no memory for polled device\n");
+ error = -ENOMEM;
+ goto err_free_bdev;
+ }
+
+ poll_dev->private = bdev;
+ poll_dev->poll = gpio_keys_polled_poll;
+ poll_dev->poll_interval = pdata->poll_interval;
+ poll_dev->open = gpio_keys_polled_open;
+ poll_dev->close = gpio_keys_polled_close;
+
+ input = poll_dev->input;
+
+ input->evbit[0] = BIT(EV_KEY);
+ input->name = pdev->name;
+ input->phys = DRV_NAME"/input0";
+ input->dev.parent = &pdev->dev;
+
+ input->id.bustype = BUS_HOST;
+ input->id.vendor = 0x0001;
+ input->id.product = 0x0001;
+ input->id.version = 0x0100;
+
+ for (i = 0; i < pdata->nbuttons; i++) {
+ struct gpio_keys_button *button = &pdata->buttons[i];
+ struct gpio_keys_button_data *bdata = &bdev->data[i];
+ unsigned int gpio = button->gpio;
+ unsigned int type = button->type ?: EV_KEY;
+
+ if (button->wakeup) {
+ dev_err(dev, DRV_NAME " does not support wakeup\n");
+ error = -EINVAL;
+ goto err_free_gpio;
+ }
+
+ error = gpio_request(gpio,
+ button->desc ? button->desc : DRV_NAME);
+ if (error) {
+ dev_err(dev, "unable to claim gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ error = gpio_direction_input(gpio);
+ if (error) {
+ dev_err(dev,
+ "unable to set direction on gpio %u, err=%d\n",
+ gpio, error);
+ goto err_free_gpio;
+ }
+
+ bdata->can_sleep = gpio_cansleep(gpio);
+ bdata->last_state = -1;
+ bdata->threshold = DIV_ROUND_UP(button->debounce_interval,
+ pdata->poll_interval);
+
+ input_set_capability(input, type, button->code);
+ }
+
+ bdev->poll_dev = poll_dev;
+ bdev->dev = dev;
+ bdev->pdata = pdata;
+ platform_set_drvdata(pdev, bdev);
+
+ error = input_register_polled_device(poll_dev);
+ if (error) {
+ dev_err(dev, "unable to register polled device, err=%d\n",
+ error);
+ goto err_free_gpio;
+ }
+
+ /* report initial state of the buttons */
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_keys_polled_check_state(input, &pdata->buttons[i],
+ &bdev->data[i]);
+
+ return 0;
+
+err_free_gpio:
+ while (--i >= 0)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(poll_dev);
+
+err_free_bdev:
+ kfree(bdev);
+
+ platform_set_drvdata(pdev, NULL);
+ return error;
+}
+
+static int __devexit gpio_keys_polled_remove(struct platform_device *pdev)
+{
+ struct gpio_keys_polled_dev *bdev = platform_get_drvdata(pdev);
+ struct gpio_keys_platform_data *pdata = bdev->pdata;
+ int i;
+
+ input_unregister_polled_device(bdev->poll_dev);
+
+ for (i = 0; i < pdata->nbuttons; i++)
+ gpio_free(pdata->buttons[i].gpio);
+
+ input_free_polled_device(bdev->poll_dev);
+
+ kfree(bdev);
+ platform_set_drvdata(pdev, NULL);
+
+ return 0;
+}
+
+static struct platform_driver gpio_keys_polled_driver = {
+ .probe = gpio_keys_polled_probe,
+ .remove = __devexit_p(gpio_keys_polled_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init gpio_keys_polled_init(void)
+{
+ return platform_driver_register(&gpio_keys_polled_driver);
+}
+
+static void __exit gpio_keys_polled_exit(void)
+{
+ platform_driver_unregister(&gpio_keys_polled_driver);
+}
+
+module_init(gpio_keys_polled_init);
+module_exit(gpio_keys_polled_exit);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
+MODULE_DESCRIPTION("Polled GPIO Buttons driver");
+MODULE_ALIAS("platform:" DRV_NAME);
#define SYN_EXT_CAP_REQUESTS(c) (((c) & 0x700000) >> 20)
#define SYN_CAP_MULTI_BUTTON_NO(ec) (((ec) & 0x00f000) >> 12)
#define SYN_CAP_PRODUCT_ID(ec) (((ec) & 0xff0000) >> 16)
-#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100100)
+#define SYN_CAP_CLICKPAD(ex0c) ((ex0c) & 0x100000) /* 1-button ClickPad */
+#define SYN_CAP_CLICKPAD2BTN(ex0c) ((ex0c) & 0x000100) /* 2-button ClickPad */
#define SYN_CAP_MAX_DIMENSIONS(ex0c) ((ex0c) & 0x020000)
/* synaptics modes query bits */
gscps2_reset(ps2port);
ps2port->id = readb(ps2port->addr + GSC_ID) & 0x0f;
- snprintf(serio->name, sizeof(serio->name), "GSC PS/2 %s",
+ snprintf(serio->name, sizeof(serio->name), "gsc-ps2-%s",
(ps2port->id == GSC_ID_KEYBOARD) ? "keyboard" : "mouse");
strlcpy(serio->phys, dev_name(&dev->dev), sizeof(serio->phys));
serio->id.type = SERIO_8042;
{ "Wacom Bamboo Craft", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
static struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static const struct wacom_features wacom_features_0xD4 =
+ { "Wacom Bamboo Pen", WACOM_PKGLEN_BBFUN, 14720, 9200, 255, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xD8 =
+ { "Wacom Bamboo Comic 2FG", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDA =
+ { "Wacom Bamboo 2FG 4x5 SE", WACOM_PKGLEN_BBFUN, 14720, 9200, 1023, 63, BAMBOO_PT };
+static struct wacom_features wacom_features_0xDB =
+ { "Wacom Bamboo 2FG 6x8 SE", WACOM_PKGLEN_BBFUN, 21648, 13530, 1023, 63, BAMBOO_PT };
#define USB_DEVICE_WACOM(prod) \
USB_DEVICE(USB_VENDOR_ID_WACOM, prod), \
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
+ { USB_DEVICE_WACOM(0xD4) },
+ { USB_DEVICE_WACOM(0xD8) },
+ { USB_DEVICE_WACOM(0xDA) },
+ { USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0x90) },
#ifdef CONFIG_TOUCHSCREEN_USB_ITM
{USB_DEVICE(0x0403, 0xf9e9), .driver_info = DEVTYPE_ITM},
+ {USB_DEVICE(0x16e3, 0xf9e9), .driver_info = DEVTYPE_ITM},
#endif
#ifdef CONFIG_TOUCHSCREEN_USB_ETURBO
static int __init icn_init(void)
{
char *p;
- char rev[10];
+ char rev[20];
memset(&dev, 0, sizeof(icn_dev));
dev.memaddr = (membase & 0x0ffc000);
spin_lock_init(&dev.devlock);
if ((p = strchr(revision, ':'))) {
- strcpy(rev, p + 1);
+ strncpy(rev, p + 1, 20);
p = strchr(rev, '$');
- *p = 0;
+ if (p)
+ *p = 0;
} else
strcpy(rev, " ??? ");
printk(KERN_NOTICE "ICN-ISDN-driver Rev%smem=0x%08lx\n", rev,
This is not related to standard keyboard LEDs which are controlled
via the input system.
-if NEW_LEDS
-
config LEDS_CLASS
bool "LED Class Support"
+ depends on NEW_LEDS
help
This option enables the led sysfs class in /sys/class/leds. You'll
need this to do anything useful with LEDs. If unsure, say N.
-if LEDS_CLASS
+if NEW_LEDS
comment "LED drivers"
config LEDS_88PM860X
tristate "LED Support for Marvell 88PM860x PMIC"
+ depends on LEDS_CLASS
depends on MFD_88PM860X
help
This option enables support for on-chip LED drivers found on Marvell
config LEDS_ATMEL_PWM
tristate "LED Support using Atmel PWM outputs"
+ depends on LEDS_CLASS
depends on ATMEL_PWM
help
This option enables support for LEDs driven using outputs
config LEDS_LOCOMO
tristate "LED Support for Locomo device"
+ depends on LEDS_CLASS
depends on SHARP_LOCOMO
help
This option enables support for the LEDs on Sharp Locomo.
config LEDS_MIKROTIK_RB532
tristate "LED Support for Mikrotik Routerboard 532"
+ depends on LEDS_CLASS
depends on MIKROTIK_RB532
help
This option enables support for the so called "User LED" of
config LEDS_S3C24XX
tristate "LED Support for Samsung S3C24XX GPIO LEDs"
+ depends on LEDS_CLASS
depends on ARCH_S3C2410
help
This option enables support for LEDs connected to GPIO lines
config LEDS_AMS_DELTA
tristate "LED Support for the Amstrad Delta (E3)"
+ depends on LEDS_CLASS
depends on MACH_AMS_DELTA
help
This option enables support for the LEDs on Amstrad Delta (E3).
config LEDS_NET48XX
tristate "LED Support for Soekris net48xx series Error LED"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the Soekris net4801 and net4826 error
config LEDS_FSG
tristate "LED Support for the Freecom FSG-3"
+ depends on LEDS_CLASS
depends on MACH_FSG
help
This option enables support for the LEDs on the Freecom FSG-3.
config LEDS_WRAP
tristate "LED Support for the WRAP series LEDs"
+ depends on LEDS_CLASS
depends on SCx200_GPIO
help
This option enables support for the PCEngines WRAP programmable LEDs.
config LEDS_ALIX2
tristate "LED Support for ALIX.2 and ALIX.3 series"
+ depends on LEDS_CLASS
depends on X86 && !GPIO_CS5535 && !CS5535_GPIO
help
This option enables support for the PCEngines ALIX.2 and ALIX.3 LEDs.
config LEDS_H1940
tristate "LED Support for iPAQ H1940 device"
+ depends on LEDS_CLASS
depends on ARCH_H1940
help
This option enables support for the LEDs on the h1940.
config LEDS_COBALT_QUBE
tristate "LED Support for the Cobalt Qube series front LED"
+ depends on LEDS_CLASS
depends on MIPS_COBALT
help
This option enables support for the front LED on Cobalt Qube series
config LEDS_SUNFIRE
tristate "LED support for SunFire servers."
+ depends on LEDS_CLASS
depends on SPARC64
select LEDS_TRIGGERS
help
config LEDS_HP6XX
tristate "LED Support for the HP Jornada 6xx"
+ depends on LEDS_CLASS
depends on SH_HP6XX
help
This option enables LED support for the handheld
config LEDS_PCA9532
tristate "LED driver for PCA9532 dimmer"
+ depends on LEDS_CLASS
depends on I2C && INPUT && EXPERIMENTAL
help
This option enables support for NXP pca9532
config LEDS_GPIO
tristate "LED Support for GPIO connected LEDs"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for the LEDs connected to GPIO
config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to the National
config LEDS_CLEVO_MAIL
tristate "Mail LED on Clevo notebook"
+ depends on LEDS_CLASS
depends on X86 && SERIO_I8042 && DMI
help
This driver makes the mail LED accessible from userspace
config LEDS_PCA955X
tristate "LED Support for PCA955x I2C chips"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for LEDs connected to PCA955x
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
+ depends on LEDS_CLASS
depends on MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC"
+ depends on LEDS_CLASS
depends on MFD_WM8350
help
This option enables support for LEDs driven by the Wolfson
config LEDS_DA903X
tristate "LED Support for DA9030/DA9034 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_DA903X
help
This option enables support for on-chip LED drivers found
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
+ depends on LEDS_CLASS
depends on SPI
help
This option enables support for DAC124S085 SPI DAC from NatSemi,
config LEDS_PWM
tristate "PWM driven LED Support"
+ depends on LEDS_CLASS
depends on HAVE_PWM
help
This option enables support for pwm driven LEDs
config LEDS_REGULATOR
tristate "REGULATOR driven LED support"
+ depends on LEDS_CLASS
depends on REGULATOR
help
This option enables support for regulator driven LEDs.
config LEDS_BD2802
tristate "LED driver for BD2802 RGB LED"
+ depends on LEDS_CLASS
depends on I2C
help
This option enables support for BD2802GU RGB LED driver chips
config LEDS_INTEL_SS4200
tristate "LED driver for Intel NAS SS4200 series"
+ depends on LEDS_CLASS
depends on PCI && DMI
help
This option enables support for the Intel SS4200 series of
config LEDS_LT3593
tristate "LED driver for LT3593 controllers"
+ depends on LEDS_CLASS
depends on GENERIC_GPIO
help
This option enables support for LEDs driven by a Linear Technology
config LEDS_ADP5520
tristate "LED Support for ADP5520/ADP5501 PMIC"
+ depends on LEDS_CLASS
depends on PMIC_ADP5520
help
This option enables support for on-chip LED drivers found
config LEDS_DELL_NETBOOKS
tristate "External LED on Dell Business Netbooks"
+ depends on LEDS_CLASS
depends on X86 && ACPI_WMI
help
This adds support for the Latitude 2100 and similar
config LEDS_MC13783
tristate "LED Support for MC13783 PMIC"
+ depends on LEDS_CLASS
depends on MFD_MC13783
help
This option enable support for on-chip LED drivers found
config LEDS_NS2
tristate "LED support for Network Space v2 GPIO LEDs"
+ depends on LEDS_CLASS
depends on MACH_NETSPACE_V2 || MACH_INETSPACE_V2 || MACH_NETSPACE_MAX_V2 || D2NET_V2
default y
help
config LEDS_TRIGGERS
bool "LED Trigger support"
+ depends on LEDS_CLASS
help
This option enables trigger support for the leds class.
These triggers allow kernel events to drive the LEDs and can
be configured via sysfs. If unsure, say Y.
-if LEDS_TRIGGERS
-
comment "LED Triggers"
config LEDS_TRIGGER_TIMER
tristate "LED Timer Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a programmable timer
via sysfs. Some LED hardware can be programmed to start
config LEDS_TRIGGER_IDE_DISK
bool "LED IDE Disk Trigger"
depends on IDE_GD_ATA
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by IDE disk activity.
If unsure, say Y.
config LEDS_TRIGGER_HEARTBEAT
tristate "LED Heartbeat Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled by a CPU load average.
The flash frequency is a hyperbolic function of the 1-minute
config LEDS_TRIGGER_BACKLIGHT
tristate "LED backlight Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be controlled as a backlight device: they
turn off and on when the display is blanked and unblanked.
config LEDS_TRIGGER_GPIO
tristate "LED GPIO Trigger"
+ depends on LEDS_TRIGGERS
depends on GPIOLIB
help
This allows LEDs to be controlled by gpio events. It's good
config LEDS_TRIGGER_DEFAULT_ON
tristate "LED Default ON Trigger"
+ depends on LEDS_TRIGGERS
help
This allows LEDs to be initialised in the ON state.
If unsure, say Y.
comment "iptables trigger is under Netfilter config (LED target)"
depends on LEDS_TRIGGERS
-endif # LEDS_TRIGGERS
-
-endif # LEDS_CLASS
-
endif # NEW_LEDS
config ADB_PMU_LED_IDE
bool "Use front LED as IDE LED by default"
depends on ADB_PMU_LED
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
select LEDS_TRIGGER_IDE_DISK
help
bio_put(bio);
}
-static void submit_flushes(mddev_t *mddev)
+static void md_submit_flush_data(struct work_struct *ws);
+
+static void submit_flushes(struct work_struct *ws)
{
+ mddev_t *mddev = container_of(ws, mddev_t, flush_work);
mdk_rdev_t *rdev;
+ INIT_WORK(&mddev->flush_work, md_submit_flush_data);
+ atomic_set(&mddev->flush_pending, 1);
rcu_read_lock();
list_for_each_entry_rcu(rdev, &mddev->disks, same_set)
if (rdev->raid_disk >= 0 &&
rdev_dec_pending(rdev, mddev);
}
rcu_read_unlock();
+ if (atomic_dec_and_test(&mddev->flush_pending))
+ queue_work(md_wq, &mddev->flush_work);
}
static void md_submit_flush_data(struct work_struct *ws)
mddev_t *mddev = container_of(ws, mddev_t, flush_work);
struct bio *bio = mddev->flush_bio;
- atomic_set(&mddev->flush_pending, 1);
-
if (bio->bi_size == 0)
/* an empty barrier - all done */
bio_endio(bio, 0);
if (mddev->pers->make_request(mddev, bio))
generic_make_request(bio);
}
- if (atomic_dec_and_test(&mddev->flush_pending)) {
- mddev->flush_bio = NULL;
- wake_up(&mddev->sb_wait);
- }
+
+ mddev->flush_bio = NULL;
+ wake_up(&mddev->sb_wait);
}
void md_flush_request(mddev_t *mddev, struct bio *bio)
mddev->flush_bio = bio;
spin_unlock_irq(&mddev->write_lock);
- atomic_set(&mddev->flush_pending, 1);
- INIT_WORK(&mddev->flush_work, md_submit_flush_data);
-
- submit_flushes(mddev);
-
- if (atomic_dec_and_test(&mddev->flush_pending))
- queue_work(md_wq, &mddev->flush_work);
+ INIT_WORK(&mddev->flush_work, submit_flushes);
+ queue_work(md_wq, &mddev->flush_work);
}
EXPORT_SYMBOL(md_flush_request);
PTR_ERR(rdev));
return PTR_ERR(rdev);
}
- /* set save_raid_disk if appropriate */
+ /* set saved_raid_disk if appropriate */
if (!mddev->persistent) {
if (info->state & (1<<MD_DISK_SYNC) &&
info->raid_disk < mddev->raid_disks)
} else
super_types[mddev->major_version].
validate_super(mddev, rdev);
- rdev->saved_raid_disk = rdev->raid_disk;
+ if (test_bit(In_sync, &rdev->flags))
+ rdev->saved_raid_disk = rdev->raid_disk;
+ else
+ rdev->saved_raid_disk = -1;
clear_bit(In_sync, &rdev->flags); /* just to be sure */
if (info->state & (1<<MD_DISK_WRITEMOSTLY))
|| kthread_should_stop(),
thread->timeout);
- clear_bit(THREAD_WAKEUP, &thread->flags);
-
- thread->run(thread->mddev);
+ if (test_and_clear_bit(THREAD_WAKEUP, &thread->flags))
+ thread->run(thread->mddev);
}
return 0;
return 0;
out_free_conf:
+ md_unregister_thread(mddev->thread);
if (conf->r10bio_pool)
mempool_destroy(conf->r10bio_pool);
safe_put_page(conf->tmppage);
kfree(conf->mirrors);
kfree(conf);
mddev->private = NULL;
- md_unregister_thread(mddev->thread);
out:
return -EIO;
}
select MEDIA_TUNER_TDA9887 if !MEDIA_TUNER_CUSTOMISE
select MEDIA_TUNER_MC44S803 if !MEDIA_TUNER_CUSTOMISE
-menuconfig MEDIA_TUNER_CUSTOMISE
+config MEDIA_TUNER_CUSTOMISE
bool "Customize analog and hybrid tuner modules to build"
depends on MEDIA_TUNER
default y if EMBEDDED
If unsure say N.
-if MEDIA_TUNER_CUSTOMISE
+menu "Customize TV tuners"
+ visible if MEDIA_TUNER_CUSTOMISE
config MEDIA_TUNER_SIMPLE
tristate "Simple tuner support"
default m if MEDIA_TUNER_CUSTOMISE
help
NXP TDA18218 silicon tuner driver.
-
-endif # MEDIA_TUNER_CUSTOMISE
+endmenu
If unsure say N.
-if DVB_FE_CUSTOMISE
-
menu "Customise DVB Frontends"
+ visible if DVB_FE_CUSTOMISE
comment "Multistandard (satellite) frontends"
depends on DVB_CORE
tristate "Dummy frontend driver"
default n
endmenu
-
-endif
static const struct v4l2_file_operations rtrack_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack_ioctl_ops = {
rt->vdev.release = video_device_release_empty;
video_set_drvdata(&rt->vdev, rt);
- if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(&rt->v4l2_dev);
- release_region(rt->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
-
/* Set up the I/O locking */
mutex_init(&rt->lock);
sleep_delay(2000000); /* make sure it's totally down */
outb(0xc0, rt->io); /* steady volume, mute card */
+ if (video_register_device(&rt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(&rt->v4l2_dev);
+ release_region(rt->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "AIMSlab RadioTrack/RadioReveal card driver.\n");
+
return 0;
}
static const struct v4l2_file_operations aztech_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
az->vdev.ioctl_ops = &aztech_ioctl_ops;
az->vdev.release = video_device_release_empty;
video_set_drvdata(&az->vdev, az);
+ /* mute card - prevents noisy bootups */
+ outb(0, az->io);
if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
}
v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
- /* mute card - prevents noisy bootups */
- outb(0, az->io);
return 0;
}
unsigned char readbuf[RDS_BUFFER];
int i = 0;
+ mutex_lock(&dev->lock);
if (dev->rdsstat == 0) {
- mutex_lock(&dev->lock);
dev->rdsstat = 1;
outb(0x80, dev->io); /* Select RDS fifo */
- mutex_unlock(&dev->lock);
init_timer(&dev->readtimer);
dev->readtimer.function = cadet_handler;
dev->readtimer.data = (unsigned long)dev;
add_timer(&dev->readtimer);
}
if (dev->rdsin == dev->rdsout) {
+ mutex_unlock(&dev->lock);
if (file->f_flags & O_NONBLOCK)
return -EWOULDBLOCK;
interruptible_sleep_on(&dev->read_queue);
+ mutex_lock(&dev->lock);
}
while (i < count && dev->rdsin != dev->rdsout)
readbuf[i++] = dev->rdsbuf[dev->rdsout++];
+ mutex_unlock(&dev->lock);
if (copy_to_user(data, readbuf, i))
return -EFAULT;
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users++;
if (1 == dev->users)
init_waitqueue_head(&dev->read_queue);
+ mutex_unlock(&dev->lock);
return 0;
}
{
struct cadet *dev = video_drvdata(file);
+ mutex_lock(&dev->lock);
dev->users--;
if (0 == dev->users) {
del_timer_sync(&dev->readtimer);
dev->rdsstat = 0;
}
+ mutex_unlock(&dev->lock);
return 0;
}
.open = cadet_open,
.release = cadet_release,
.read = cadet_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = cadet_poll,
};
static const struct v4l2_file_operations gemtek_pci_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops gemtek_pci_ioctl_ops = {
card->vdev.release = video_device_release_empty;
video_set_drvdata(&card->vdev, card);
+ gemtek_pci_mute(card);
+
if (video_register_device(&card->vdev, VFL_TYPE_RADIO, nr_radio) < 0)
goto err_video;
- gemtek_pci_mute(card);
-
v4l2_info(v4l2_dev, "Gemtek PCI Radio (rev. %d) found at 0x%04x-0x%04x.\n",
pdev->revision, card->iobase, card->iobase + card->length - 1);
static const struct v4l2_file_operations gemtek_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
gt->vdev.release = video_device_release_empty;
video_set_drvdata(>->vdev, gt);
- if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(gt->io, 1);
- return -EBUSY;
- }
-
/* Set defaults */
gt->lastfreq = GEMTEK_LOWFREQ;
gt->bu2614data = 0;
if (initmute)
gemtek_mute(gt);
+ if (video_register_device(>->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(gt->io, 1);
+ return -EBUSY;
+ }
+
return 0;
}
static const struct v4l2_file_operations maestro_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maestro_ioctl_ops = {
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ if (!radio_power_on(dev)) {
+ retval = -EIO;
+ goto errfr1;
+ }
+
retval = video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr);
if (retval) {
v4l2_err(v4l2_dev, "can't register video device!\n");
goto errfr1;
}
- if (!radio_power_on(dev)) {
- retval = -EIO;
- goto errunr;
- }
-
v4l2_info(v4l2_dev, "version " DRIVER_VERSION "\n");
return 0;
-errunr:
- video_unregister_device(&dev->vdev);
errfr1:
v4l2_device_unregister(v4l2_dev);
errfr:
static const struct v4l2_file_operations maxiradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops maxiradio_ioctl_ops = {
unsigned long freq;
int muted;
struct snd_miro_aci *aci;
+ struct mutex lock;
};
static struct pcm20 pcm20_card = {
static const struct v4l2_file_operations pcm20_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int vidioc_querycap(struct file *file, void *priv,
return -ENODEV;
}
strlcpy(v4l2_dev->name, "miropcm20", sizeof(v4l2_dev->name));
-
+ mutex_init(&dev->lock);
res = v4l2_device_register(NULL, v4l2_dev);
if (res < 0) {
dev->vdev.fops = &pcm20_fops;
dev->vdev.ioctl_ops = &pcm20_ioctl_ops;
dev->vdev.release = video_device_release_empty;
+ dev->vdev.lock = &dev->lock;
video_set_drvdata(&dev->vdev, dev);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0)
static const struct v4l2_file_operations rtrack2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops rtrack2_ioctl_ops = {
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+ /* mute card - prevents noisy bootups */
+ outb(1, dev->io);
+ dev->muted = 1;
+
mutex_init(&dev->lock);
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
v4l2_info(v4l2_dev, "AIMSlab Radiotrack II card driver.\n");
- /* mute card - prevents noisy bootups */
- outb(1, dev->io);
- dev->muted = 1;
-
return 0;
}
static const struct v4l2_file_operations fmi_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmi_ioctl_ops = {
mutex_init(&fmi->lock);
+ /* mute card - prevents noisy bootups */
+ fmi_mute(fmi);
+
if (video_register_device(&fmi->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmi->io, 2);
}
v4l2_info(v4l2_dev, "card driver at 0x%x\n", fmi->io);
- /* mute card - prevents noisy bootups */
- fmi_mute(fmi);
return 0;
}
static const struct v4l2_file_operations fmr2_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops fmr2_ioctl_ops = {
fmr2->vdev.release = video_device_release_empty;
video_set_drvdata(&fmr2->vdev, fmr2);
+ /* mute card - prevents noisy bootups */
+ fmr2_mute(fmr2->io);
+ fmr2_product_info(fmr2);
+
if (video_register_device(&fmr2->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(v4l2_dev);
release_region(fmr2->io, 2);
}
v4l2_info(v4l2_dev, "SF16FMR2 radio card driver at 0x%x.\n", fmr2->io);
- /* mute card - prevents noisy bootups */
- mutex_lock(&fmr2->lock);
- fmr2_mute(fmr2->io);
- fmr2_product_info(fmr2);
- mutex_unlock(&fmr2->lock);
debug_print((KERN_DEBUG "card_type %d\n", fmr2->card_type));
return 0;
}
/* radio_si4713_fops - file operations interface */
static const struct v4l2_file_operations radio_si4713_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ /* Note: locking is done at the subdev level in the i2c driver. */
+ .unlocked_ioctl = video_ioctl2,
};
/* Video4Linux Interface */
goto unregister_v4l2_dev;
}
- sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter, NULL,
+ sd = v4l2_i2c_new_subdev_board(&rsdev->v4l2_dev, adapter,
pdata->subdev_board_info, NULL);
if (!sd) {
dev_err(&pdev->dev, "Cannot get v4l2 subdevice\n");
struct video_device *videodev;
struct tea5764_regs regs;
struct mutex mutex;
- int users;
};
/* I2C code related */
return 0;
}
-static int tea5764_open(struct file *file)
-{
- /* Currently we support only one device */
- struct tea5764_device *radio = video_drvdata(file);
-
- mutex_lock(&radio->mutex);
- /* Only exclusive access */
- if (radio->users) {
- mutex_unlock(&radio->mutex);
- return -EBUSY;
- }
- radio->users++;
- mutex_unlock(&radio->mutex);
- file->private_data = radio;
- return 0;
-}
-
-static int tea5764_close(struct file *file)
-{
- struct tea5764_device *radio = video_drvdata(file);
-
- if (!radio)
- return -ENODEV;
- mutex_lock(&radio->mutex);
- radio->users--;
- mutex_unlock(&radio->mutex);
- return 0;
-}
-
/* File system interface */
static const struct v4l2_file_operations tea5764_fops = {
.owner = THIS_MODULE,
- .open = tea5764_open,
- .release = tea5764_close,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops tea5764_ioctl_ops = {
int ret;
PDEBUG("probe");
- radio = kmalloc(sizeof(struct tea5764_device), GFP_KERNEL);
+ radio = kzalloc(sizeof(struct tea5764_device), GFP_KERNEL);
if (!radio)
return -ENOMEM;
i2c_set_clientdata(client, radio);
video_set_drvdata(radio->videodev, radio);
-
- ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
- if (ret < 0) {
- PWARN("Could not register video device!");
- goto errrel;
- }
+ radio->videodev->lock = &radio->mutex;
/* initialize and power off the chip */
tea5764_i2c_read(radio);
tea5764_mute(radio, 1);
tea5764_power_down(radio);
+ ret = video_register_device(radio->videodev, VFL_TYPE_RADIO, radio_nr);
+ if (ret < 0) {
+ PWARN("Could not register video device!");
+ goto errrel;
+ }
+
PINFO("registered.");
return 0;
errrel:
static const struct v4l2_file_operations terratec_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops terratec_ioctl_ops = {
mutex_init(&tt->lock);
+ /* mute card - prevents noisy bootups */
+ tt_write_vol(tt, 0);
+
if (video_register_device(&tt->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&tt->v4l2_dev);
release_region(tt->io, 2);
}
v4l2_info(v4l2_dev, "TERRATEC ActivRadio Standalone card driver.\n");
-
- /* mute card - prevents noisy bootups */
- tt_write_vol(tt, 0);
return 0;
}
struct v4l2_subdev *sd_dsp;
struct video_device video_dev;
struct v4l2_device v4l2_dev;
+ struct mutex lock;
};
static const struct v4l2_file_operations timbradio_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static int __devinit timbradio_probe(struct platform_device *pdev)
}
tr->pdata = *pdata;
+ mutex_init(&tr->lock);
strlcpy(tr->video_dev.name, "Timberdale Radio",
sizeof(tr->video_dev.name));
tr->video_dev.ioctl_ops = &timbradio_ioctl_ops;
tr->video_dev.release = video_device_release_empty;
tr->video_dev.minor = -1;
+ tr->video_dev.lock = &tr->lock;
strlcpy(tr->v4l2_dev.name, DRIVER_NAME, sizeof(tr->v4l2_dev.name));
err = v4l2_device_register(NULL, &tr->v4l2_dev);
static const struct v4l2_file_operations trust_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops trust_ioctl_ops = {
tr->vdev.release = video_device_release_empty;
video_set_drvdata(&tr->vdev, tr);
- if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(tr->io, 2);
- return -EINVAL;
- }
-
- v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
-
write_i2c(tr, 2, TDA7318_ADDR, 0x80); /* speaker att. LF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xa0); /* speaker att. RF = 0 dB */
write_i2c(tr, 2, TDA7318_ADDR, 0xc0); /* speaker att. LR = 0 dB */
/* mute card - prevents noisy bootups */
tr_setmute(tr, 1);
+ if (video_register_device(&tr->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(tr->io, 2);
+ return -EINVAL;
+ }
+
+ v4l2_info(v4l2_dev, "Trust FM Radio card driver v1.0.\n");
+
return 0;
}
static const struct v4l2_file_operations typhoon_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops typhoon_ioctl_ops = {
strlcpy(v4l2_dev->name, "typhoon", sizeof(v4l2_dev->name));
dev->io = io;
- dev->curfreq = dev->mutefreq = mutefreq;
if (dev->io == -1) {
v4l2_err(v4l2_dev, "You must set an I/O address with io=0x316 or io=0x336\n");
return -EINVAL;
}
- if (dev->mutefreq < 87000 || dev->mutefreq > 108500) {
+ if (mutefreq < 87000 || mutefreq > 108500) {
v4l2_err(v4l2_dev, "You must set a frequency (in kHz) used when muting the card,\n");
v4l2_err(v4l2_dev, "e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108500)\n");
return -EINVAL;
}
+ dev->curfreq = dev->mutefreq = mutefreq << 4;
mutex_init(&dev->lock);
if (!request_region(dev->io, 8, "typhoon")) {
dev->vdev.ioctl_ops = &typhoon_ioctl_ops;
dev->vdev.release = video_device_release_empty;
video_set_drvdata(&dev->vdev, dev);
+
+ /* mute card - prevents noisy bootups */
+ typhoon_mute(dev);
+
if (video_register_device(&dev->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
v4l2_device_unregister(&dev->v4l2_dev);
release_region(dev->io, 8);
return -EINVAL;
}
v4l2_info(v4l2_dev, "port 0x%x.\n", dev->io);
- v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", dev->mutefreq);
- dev->mutefreq <<= 4;
-
- /* mute card - prevents noisy bootups */
- typhoon_mute(dev);
+ v4l2_info(v4l2_dev, "mute frequency is %lu kHz.\n", mutefreq);
return 0;
}
static const struct v4l2_file_operations zoltrix_fops =
{
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops zoltrix_ioctl_ops = {
return res;
}
- strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
- zol->vdev.v4l2_dev = v4l2_dev;
- zol->vdev.fops = &zoltrix_fops;
- zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
- zol->vdev.release = video_device_release_empty;
- video_set_drvdata(&zol->vdev, zol);
-
- if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
- v4l2_device_unregister(v4l2_dev);
- release_region(zol->io, 2);
- return -EINVAL;
- }
- v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
-
mutex_init(&zol->lock);
/* mute card - prevents noisy bootups */
zol->curvol = 0;
zol->stereo = 1;
+ strlcpy(zol->vdev.name, v4l2_dev->name, sizeof(zol->vdev.name));
+ zol->vdev.v4l2_dev = v4l2_dev;
+ zol->vdev.fops = &zoltrix_fops;
+ zol->vdev.ioctl_ops = &zoltrix_ioctl_ops;
+ zol->vdev.release = video_device_release_empty;
+ video_set_drvdata(&zol->vdev, zol);
+
+ if (video_register_device(&zol->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
+ v4l2_device_unregister(v4l2_dev);
+ release_region(zol->io, 2);
+ return -EINVAL;
+ }
+ v4l2_info(v4l2_dev, "Zoltrix Radio Plus card driver.\n");
+
return 0;
}
#
menu "Encoders/decoders and other helper chips"
- depends on !VIDEO_HELPER_CHIPS_AUTO
+ visible if !VIDEO_HELPER_CHIPS_AUTO
comment "Audio decoders"
static const struct v4l2_file_operations ar_fops = {
.owner = THIS_MODULE,
.read = ar_read,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops ar_ioctl_ops = {
be abstracted out if we ever need to support a different
demod) */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "au8522", 0x8e >> 1, NULL);
+ "au8522", 0x8e >> 1, NULL);
if (sd == NULL)
printk(KERN_ERR "analog subdev registration failed\n");
}
if (dev->board.tuner_type != TUNER_ABSENT) {
/* Load the tuner module, which does the attach */
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.tuner_addr, NULL);
+ "tuner", dev->board.tuner_addr, NULL);
if (sd == NULL)
printk(KERN_ERR "tuner subdev registration fail\n");
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "saa6588", 0, addrs);
+ &btv->c.i2c_adap, "saa6588", 0, addrs);
btv->has_saa6588 = (sd != NULL);
}
};
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400", 0, addrs);
+ &btv->c.i2c_adap, "msp3400", 0, addrs);
if (btv->sd_msp34xx)
return;
goto no_audio;
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
goto no_audio;
}
case 3: {
/* The user specified that we should probe for tvaudio */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
goto no_audio;
found is really something else (e.g. a tea6300). */
if (!bttv_tvcards[btv->c.type].no_msp34xx) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "msp3400",
+ &btv->c.i2c_adap, "msp3400",
0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
}
};
if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tda7432", 0, addrs))
+ &btv->c.i2c_adap, "tda7432", 0, addrs))
return;
}
/* Now see if we can find one of the tvaudio devices. */
btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tvaudio", 0, tvaudio_addrs());
+ &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
if (btv->sd_tvaudio)
return;
/* Load tuner module before issuing tuner config call! */
if (bttv_tvcards[btv->c.type].has_radio)
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
- &btv->c.i2c_adap, NULL, "tuner",
+ &btv->c.i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
static const struct v4l2_file_operations qcam_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = qcam_read,
};
.read = cafe_v4l_read,
.poll = cafe_v4l_poll,
.mmap = cafe_v4l_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
};
static const struct v4l2_ioctl_ops cafe_v4l_ioctl_ops = {
cam->sensor_addr = 0x42;
cam->sensor = v4l2_i2c_new_subdev_cfg(&cam->v4l2_dev, &cam->i2c_adapter,
- "ov7670", "ov7670", 0, &sensor_cfg, cam->sensor_addr,
- NULL);
+ "ov7670", 0, &sensor_cfg, cam->sensor_addr, NULL);
if (cam->sensor == NULL) {
ret = -ENODEV;
goto out_smbus;
static int snd_cx18_pcm_ioctl(struct snd_pcm_substream *substream,
unsigned int cmd, void *arg)
{
- return snd_pcm_lib_ioctl(substream, cmd, arg);
+ struct snd_cx18_card *cxsc = snd_pcm_substream_chip(substream);
+ int ret;
+
+ snd_cx18_lock(cxsc);
+ ret = snd_pcm_lib_ioctl(substream, cmd, arg);
+ snd_cx18_unlock(cxsc);
+ return ret;
}
if (hw == CX18_HW_TUNER) {
/* special tuner group handling */
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->radio);
+ adap, type, 0, cx->card_i2c->radio);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->demod);
+ adap, type, 0, cx->card_i2c->demod);
if (sd != NULL)
sd->grp_id = hw;
sd = v4l2_i2c_new_subdev(&cx->v4l2_dev,
- adap, NULL, type, 0, cx->card_i2c->tv);
+ adap, type, 0, cx->card_i2c->tv);
if (sd != NULL)
sd->grp_id = hw;
return sd != NULL ? 0 : -1;
return -1;
/* It's an I2C device other than an analog tuner or IR chip */
- sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, NULL, type, hw_addrs[idx],
+ sd = v4l2_i2c_new_subdev(&cx->v4l2_dev, adap, type, hw_addrs[idx],
NULL);
if (sd != NULL)
sd->grp_id = hw;
.read = cx18_v4l2_read,
.open = cx18_v4l2_open,
/* FIXME change to video_ioctl2 if serialization lock can be removed */
- .ioctl = cx18_v4l2_ioctl,
+ .unlocked_ioctl = cx18_v4l2_ioctl,
.release = cx18_v4l2_close,
.poll = cx18_v4l2_enc_poll,
};
if (dev->board.decoder == CX231XX_AVDECODER) {
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[0].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840 == NULL)
cx231xx_info("cx25840 subdev registration failure\n");
cx25840_call(dev, core, load_fw);
if (dev->board.tuner_type != TUNER_ABSENT) {
dev->sd_tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[dev->board.tuner_i2c_master].i2c_adap,
- NULL, "tuner",
+ "tuner",
dev->tuner_addr, NULL);
if (dev->sd_tuner == NULL)
cx231xx_info("tuner subdev registration failure\n");
case CX23885_BOARD_LEADTEK_WINFAST_PXTV1200:
dev->sd_cx25840 = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[2].i2c_adap,
- NULL, "cx25840", 0x88 >> 1, NULL);
+ "cx25840", 0x88 >> 1, NULL);
if (dev->sd_cx25840) {
dev->sd_cx25840->grp_id = CX23885_HW_AV_CORE;
v4l2_subdev_call(dev->sd_cx25840, core, load_fw);
if (dev->tuner_addr)
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
&dev->i2c_bus[1].i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
else
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_bus[1].i2c_adap, NULL,
+ &dev->i2c_bus[1].i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_TV));
if (sd) {
struct tuner_setup tun_setup;
later code configures a tea5767.
*/
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner",
- 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+ "tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
if (has_demod)
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (core->board.tuner_addr == ADDR_UNSET) {
v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap, NULL, "tuner",
+ &core->i2c_adap, "tuner",
0, has_demod ? tv_addrs + 4 : tv_addrs);
} else {
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "tuner", core->board.tuner_addr, NULL);
+ "tuner", core->board.tuner_addr, NULL);
}
}
if (core->board.audio_chip == V4L2_IDENT_WM8775)
v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
- NULL, "wm8775", 0x36 >> 1, NULL);
+ "wm8775", 0x36 >> 1, NULL);
if (core->board.audio_chip == V4L2_IDENT_TVAUDIO) {
/* This probes for a tda9874 as is used on some
Pixelview Ultra boards. */
- v4l2_i2c_new_subdev(&core->v4l2_dev,
- &core->i2c_adap,
- NULL, "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
+ v4l2_i2c_new_subdev(&core->v4l2_dev, &core->i2c_adap,
+ "tvaudio", 0, I2C_ADDRS(0xb0 >> 1));
}
switch (core->boardnr) {
vpfe_dev->sd[i] =
v4l2_i2c_new_subdev_board(&vpfe_dev->v4l2_dev,
i2c_adap,
- NULL,
&sdinfo->board_info,
NULL);
if (vpfe_dev->sd[i]) {
vpif_obj.sd[i] =
v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
i2c_adap,
- NULL,
&subdevdata->board_info,
NULL);
for (i = 0; i < subdev_count; i++) {
vpif_obj.sd[i] = v4l2_i2c_new_subdev_board(&vpif_obj.v4l2_dev,
- i2c_adap, NULL,
+ i2c_adap,
&subdevdata[i].board_info,
NULL);
if (!vpif_obj.sd[i]) {
/* request some modules */
if (dev->board.has_msp34xx)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "msp3400", 0, msp3400_addrs);
+ "msp3400", 0, msp3400_addrs);
if (dev->board.decoder == EM28XX_SAA711X)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa7115_auto", 0, saa711x_addrs);
+ "saa7115_auto", 0, saa711x_addrs);
if (dev->board.decoder == EM28XX_TVP5150)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvp5150", 0, tvp5150_addrs);
+ "tvp5150", 0, tvp5150_addrs);
if (dev->em28xx_sensor == EM28XX_MT9V011) {
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "mt9v011", 0, mt9v011_addrs);
+ &dev->i2c_adap, "mt9v011", 0, mt9v011_addrs);
v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
}
if (dev->board.adecoder == EM28XX_TVAUDIO)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", dev->board.tvaudio_addr, NULL);
+ "tvaudio", dev->board.tvaudio_addr, NULL);
if (dev->board.tuner_type != TUNER_ABSENT) {
int has_demod = (dev->tda9887_conf & TDA9887_PRESENT);
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->board.radio_addr, NULL);
+ "tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
dev->tuner_addr = v4l2_i2c_subdev_addr(sd);
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
}
}
.owner = THIS_MODULE,
.open = et61x251_open,
.release = et61x251_release,
- .ioctl = et61x251_ioctl,
+ .unlocked_ioctl = et61x251_ioctl,
.read = et61x251_read,
.poll = et61x251_poll,
.mmap = et61x251_mmap,
ad = i2c_get_adapter(0);
viu_dev->decoder = v4l2_i2c_new_subdev(&viu_dev->v4l2_dev, ad,
- NULL, "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
+ "saa7113", VIU_VIDEO_DECODER_ADDR, NULL);
viu_dev->vidq.timeout.function = viu_vid_timeout;
viu_dev->vidq.timeout.data = (unsigned long)viu_dev;
return -1;
if (hw == IVTV_HW_TUNER) {
/* special tuner handling */
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->radio);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->radio);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->demod);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->demod);
if (sd)
sd->grp_id = 1 << idx;
- sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type,
- 0, itv->card_i2c->tv);
+ sd = v4l2_i2c_new_subdev(&itv->v4l2_dev, adap, type, 0,
+ itv->card_i2c->tv);
if (sd)
sd->grp_id = 1 << idx;
return sd ? 0 : -1;
/* It's an I2C device other than an analog tuner or IR chip */
if (hw == IVTV_HW_UPD64031A || hw == IVTV_HW_UPD6408X) {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, 0, I2C_ADDRS(hw_addrs[idx]));
+ adap, type, 0, I2C_ADDRS(hw_addrs[idx]));
} else if (hw == IVTV_HW_CX25840) {
struct cx25840_platform_data pdata;
pdata.pvr150_workaround = itv->pvr150_workaround;
sd = v4l2_i2c_new_subdev_cfg(&itv->v4l2_dev,
- adap, NULL, type, 0, &pdata, hw_addrs[idx],
- NULL);
+ adap, type, 0, &pdata, hw_addrs[idx], NULL);
} else {
sd = v4l2_i2c_new_subdev(&itv->v4l2_dev,
- adap, NULL, type, hw_addrs[idx], NULL);
+ adap, type, hw_addrs[idx], NULL);
}
if (sd)
sd->grp_id = 1 << idx;
.open = meye_open,
.release = meye_release,
.mmap = meye_mmap,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.poll = meye_poll,
};
msleep(1);
mchip_set(MCHIP_MM_INTA, MCHIP_MM_INTA_HIC_1_MASK);
- if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
- video_nr) < 0) {
- v4l2_err(v4l2_dev, "video_register_device failed\n");
- goto outvideoreg;
- }
-
mutex_init(&meye.lock);
init_waitqueue_head(&meye.proc_list);
meye.brightness = 32 << 10;
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAPICTURE, 0);
sony_pic_camera_command(SONY_PIC_COMMAND_SETCAMERAAGC, 48);
+ if (video_register_device(meye.vdev, VFL_TYPE_GRABBER,
+ video_nr) < 0) {
+ v4l2_err(v4l2_dev, "video_register_device failed\n");
+ goto outvideoreg;
+ }
+
v4l2_info(v4l2_dev, "Motion Eye Camera Driver v%s.\n",
MEYE_DRIVER_VERSION);
v4l2_info(v4l2_dev, "mchip KL5A72002 rev. %d, base %lx, irq %d\n",
}
mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "saa7111", I2C_SAA7111A, NULL);
+ "saa7111", I2C_SAA7111A, NULL);
mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_1, NULL);
+ "tea6420", I2C_TEA6420_1, NULL);
mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6420", I2C_TEA6420_2, NULL);
+ "tea6420", I2C_TEA6420_2, NULL);
mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tea6415c", I2C_TEA6415C, NULL);
+ "tea6415c", I2C_TEA6415C, NULL);
mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tda9840", I2C_TDA9840, NULL);
+ "tda9840", I2C_TDA9840, NULL);
mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter,
- NULL, "tuner", I2C_TUNER, NULL);
+ "tuner", I2C_TUNER, NULL);
/* check if all devices are present */
if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c ||
static const struct v4l2_file_operations pms_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = pms_read,
};
" Setting up with specified i2c address 0x%x",
mid, i2caddr[0]);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- i2caddr[0], NULL);
+ fname, i2caddr[0], NULL);
} else {
pvr2_trace(PVR2_TRACE_INIT,
"Module ID %u:"
" Setting up with address probe list",
mid);
sd = v4l2_i2c_new_subdev(&hdw->v4l2_dev, &hdw->i2c_adap,
- NULL, fname,
- 0, i2caddr);
+ fname, 0, i2caddr);
}
if (!sd) {
return ERR_PTR(-ENOMEM);
sd = v4l2_i2c_new_subdev_board(&vid_cap->v4l2_dev, i2c_adap,
- MODULE_NAME, isp_info->board_info, NULL);
+ isp_info->board_info, NULL);
if (!sd) {
v4l2_err(&vid_cap->v4l2_dev, "failed to acquire subdev\n");
return NULL;
so we do not need to probe for a radio tuner device. */
if (dev->radio_type != UNSET)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (dev->tuner_addr == ADDR_UNSET) {
enum v4l2_i2c_tuner_type type =
has_demod ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
0, v4l2_i2c_tuner_addrs(type));
} else {
v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "tuner",
+ &dev->i2c_adap, "tuner",
dev->tuner_addr, NULL);
}
}
if (card_is_empress(dev)) {
struct v4l2_subdev *sd =
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "saa6752hs",
+ "saa6752hs",
saa7134_boards[dev->board].empress_addr, NULL);
if (sd)
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&dev->v4l2_dev,
- &dev->i2c_adap, NULL, "saa6588",
+ &dev->i2c_adap, "saa6588",
0, I2C_ADDRS(saa7134_boards[dev->board].rds_addr));
if (sd) {
printk(KERN_INFO "%s: found RDS decoder\n", dev->name);
int pix_idx;
struct videobuf_buffer *active;
enum sh_vou_status status;
+ struct mutex fop_lock;
};
struct sh_vou_file {
vb->state = VIDEOBUF_NEEDS_INIT;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_setup(struct videobuf_queue *vq, unsigned int *count,
unsigned int *size)
{
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex */
+/* Locking: caller holds fop_lock mutex */
static int sh_vou_buf_prepare(struct videobuf_queue *vq,
struct videobuf_buffer *vb,
enum v4l2_field field)
return 0;
}
-/* Locking: caller holds vq->vb_lock mutex and vq->irqlock spinlock */
+/* Locking: caller holds fop_lock mutex and vq->irqlock spinlock */
static void sh_vou_buf_queue(struct videobuf_queue *vq,
struct videobuf_buffer *vb)
{
V4L2_BUF_TYPE_VIDEO_OUTPUT,
V4L2_FIELD_NONE,
sizeof(struct videobuf_buffer), vdev,
- NULL);
+ &vou_dev->fop_lock);
return 0;
}
.owner = THIS_MODULE,
.open = sh_vou_open,
.release = sh_vou_release,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.mmap = sh_vou_mmap,
.poll = sh_vou_poll,
};
INIT_LIST_HEAD(&vou_dev->queue);
spin_lock_init(&vou_dev->lock);
+ mutex_init(&vou_dev->fop_lock);
atomic_set(&vou_dev->use_count, 0);
vou_dev->pdata = vou_pdata;
vou_dev->status = SH_VOU_IDLE;
vdev->tvnorms |= V4L2_STD_PAL;
vdev->v4l2_dev = &vou_dev->v4l2_dev;
vdev->release = video_device_release;
+ vdev->lock = &vou_dev->fop_lock;
vou_dev->vdev = vdev;
video_set_drvdata(vdev, vou_dev);
goto ereset;
subdev = v4l2_i2c_new_subdev_board(&vou_dev->v4l2_dev, i2c_adap,
- NULL, vou_pdata->board_info, NULL);
+ vou_pdata->board_info, NULL);
if (!subdev) {
ret = -ENOMEM;
goto ei2cnd;
.owner = THIS_MODULE,
.open = sn9c102_open,
.release = sn9c102_release,
- .ioctl = sn9c102_ioctl,
+ .unlocked_ioctl = sn9c102_ioctl,
.read = sn9c102_read,
.poll = sn9c102_poll,
.mmap = sn9c102_mmap,
icl->board_info->platform_data = icd;
subdev = v4l2_i2c_new_subdev_board(&ici->v4l2_dev, adap,
- NULL, icl->board_info, NULL);
+ icl->board_info, NULL);
if (!subdev)
goto ei2cnd;
hit-and-miss. */
mdelay(10);
v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"saa7115_auto", 0, saa711x_addrs);
break;
}
struct tuner_setup tun_setup;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
/* depending on whether we found a demod or not, select
the tuner type. */
type = sd ? ADDRS_TV_WITH_DEMOD : ADDRS_TV;
sd = v4l2_i2c_new_subdev(&usbvision->v4l2_dev,
- &usbvision->i2c_adap, NULL,
+ &usbvision->i2c_adap,
"tuner", 0, v4l2_i2c_tuner_addrs(type));
if (sd == NULL)
}
}
-struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
+static struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
__u32 v4l2_id, struct uvc_control_mapping **mapping)
{
struct uvc_control *ctrl = NULL;
return ret;
}
+/*
+ * Mapping V4L2 controls to UVC controls can be straighforward if done well.
+ * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
+ * must be grouped (for instance the Red Balance, Blue Balance and Do White
+ * Balance V4L2 controls use the White Balance Component UVC control) or
+ * otherwise translated. The approach we take here is to use a translation
+ * table for the controls that can be mapped directly, and handle the others
+ * manually.
+ */
+int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu)
+{
+ struct uvc_menu_info *menu_info;
+ struct uvc_control_mapping *mapping;
+ struct uvc_control *ctrl;
+ u32 index = query_menu->index;
+ u32 id = query_menu->id;
+ int ret;
+
+ memset(query_menu, 0, sizeof(*query_menu));
+ query_menu->id = id;
+ query_menu->index = index;
+
+ ret = mutex_lock_interruptible(&chain->ctrl_mutex);
+ if (ret < 0)
+ return -ERESTARTSYS;
+
+ ctrl = uvc_find_control(chain, query_menu->id, &mapping);
+ if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ if (query_menu->index >= mapping->menu_count) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ menu_info = &mapping->menu_info[query_menu->index];
+ strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
+
+done:
+ mutex_unlock(&chain->ctrl_mutex);
+ return ret;
+}
+
/* --------------------------------------------------------------------------
* Control transactions
queue->type = type;
}
+/*
+ * Free the video buffers.
+ *
+ * This function must be called with the queue lock held.
+ */
+static int __uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ unsigned int i;
+
+ for (i = 0; i < queue->count; ++i) {
+ if (queue->buffer[i].vma_use_count != 0)
+ return -EBUSY;
+ }
+
+ if (queue->count) {
+ vfree(queue->mem);
+ queue->count = 0;
+ }
+
+ return 0;
+}
+
+int uvc_free_buffers(struct uvc_video_queue *queue)
+{
+ int ret;
+
+ mutex_lock(&queue->mutex);
+ ret = __uvc_free_buffers(queue);
+ mutex_unlock(&queue->mutex);
+
+ return ret;
+}
+
/*
* Allocate the video buffers.
*
mutex_lock(&queue->mutex);
- if ((ret = uvc_free_buffers(queue)) < 0)
+ if ((ret = __uvc_free_buffers(queue)) < 0)
goto done;
/* Bail out if no buffers should be allocated. */
return ret;
}
-/*
- * Free the video buffers.
- *
- * This function must be called with the queue lock held.
- */
-int uvc_free_buffers(struct uvc_video_queue *queue)
-{
- unsigned int i;
-
- for (i = 0; i < queue->count; ++i) {
- if (queue->buffer[i].vma_use_count != 0)
- return -EBUSY;
- }
-
- if (queue->count) {
- vfree(queue->mem);
- queue->count = 0;
- }
-
- return 0;
-}
-
/*
* Check if buffers have been allocated.
*/
return ret;
}
+/*
+ * VMA operations.
+ */
+static void uvc_vm_open(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count++;
+}
+
+static void uvc_vm_close(struct vm_area_struct *vma)
+{
+ struct uvc_buffer *buffer = vma->vm_private_data;
+ buffer->vma_use_count--;
+}
+
+static const struct vm_operations_struct uvc_vm_ops = {
+ .open = uvc_vm_open,
+ .close = uvc_vm_close,
+};
+
+/*
+ * Memory-map a video buffer.
+ *
+ * This function implements video buffers memory mapping and is intended to be
+ * used by the device mmap handler.
+ */
+int uvc_queue_mmap(struct uvc_video_queue *queue, struct vm_area_struct *vma)
+{
+ struct uvc_buffer *uninitialized_var(buffer);
+ struct page *page;
+ unsigned long addr, start, size;
+ unsigned int i;
+ int ret = 0;
+
+ start = vma->vm_start;
+ size = vma->vm_end - vma->vm_start;
+
+ mutex_lock(&queue->mutex);
+
+ for (i = 0; i < queue->count; ++i) {
+ buffer = &queue->buffer[i];
+ if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
+ break;
+ }
+
+ if (i == queue->count || size != queue->buf_size) {
+ ret = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * VM_IO marks the area as being an mmaped region for I/O to a
+ * device. It also prevents the region from being core dumped.
+ */
+ vma->vm_flags |= VM_IO;
+
+ addr = (unsigned long)queue->mem + buffer->buf.m.offset;
+ while (size > 0) {
+ page = vmalloc_to_page((void *)addr);
+ if ((ret = vm_insert_page(vma, start, page)) < 0)
+ goto done;
+
+ start += PAGE_SIZE;
+ addr += PAGE_SIZE;
+ size -= PAGE_SIZE;
+ }
+
+ vma->vm_ops = &uvc_vm_ops;
+ vma->vm_private_data = buffer;
+ uvc_vm_open(vma);
+
+done:
+ mutex_unlock(&queue->mutex);
+ return ret;
+}
+
/*
* Poll the video queue.
*
* V4L2 interface
*/
-/*
- * Mapping V4L2 controls to UVC controls can be straighforward if done well.
- * Most of the UVC controls exist in V4L2, and can be mapped directly. Some
- * must be grouped (for instance the Red Balance, Blue Balance and Do White
- * Balance V4L2 controls use the White Balance Component UVC control) or
- * otherwise translated. The approach we take here is to use a translation
- * table for the controls that can be mapped directly, and handle the others
- * manually.
- */
-static int uvc_v4l2_query_menu(struct uvc_video_chain *chain,
- struct v4l2_querymenu *query_menu)
-{
- struct uvc_menu_info *menu_info;
- struct uvc_control_mapping *mapping;
- struct uvc_control *ctrl;
- u32 index = query_menu->index;
- u32 id = query_menu->id;
-
- ctrl = uvc_find_control(chain, query_menu->id, &mapping);
- if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU)
- return -EINVAL;
-
- if (query_menu->index >= mapping->menu_count)
- return -EINVAL;
-
- memset(query_menu, 0, sizeof(*query_menu));
- query_menu->id = id;
- query_menu->index = index;
-
- menu_info = &mapping->menu_info[query_menu->index];
- strlcpy(query_menu->name, menu_info->name, sizeof query_menu->name);
- return 0;
-}
-
/*
* Find the frame interval closest to the requested frame interval for the
* given frame format and size. This should be done by the device as part of
* developers test their webcams with the Linux driver as well as with
* the Windows driver).
*/
+ mutex_lock(&stream->mutex);
if (stream->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS)
probe->dwMaxVideoFrameSize =
stream->ctrl.dwMaxVideoFrameSize;
/* Probe the device. */
ret = uvc_probe_video(stream, probe);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
goto done;
static int uvc_v4l2_get_format(struct uvc_streaming *stream,
struct v4l2_format *fmt)
{
- struct uvc_format *format = stream->cur_format;
- struct uvc_frame *frame = stream->cur_frame;
+ struct uvc_format *format;
+ struct uvc_frame *frame;
+ int ret = 0;
if (fmt->type != stream->type)
return -EINVAL;
- if (format == NULL || frame == NULL)
- return -EINVAL;
+ mutex_lock(&stream->mutex);
+ format = stream->cur_format;
+ frame = stream->cur_frame;
+
+ if (format == NULL || frame == NULL) {
+ ret = -EINVAL;
+ goto done;
+ }
fmt->fmt.pix.pixelformat = format->fcc;
fmt->fmt.pix.width = frame->wWidth;
fmt->fmt.pix.colorspace = format->colorspace;
fmt->fmt.pix.priv = 0;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_set_format(struct uvc_streaming *stream,
if (fmt->type != stream->type)
return -EINVAL;
- if (uvc_queue_allocated(&stream->queue))
- return -EBUSY;
-
ret = uvc_v4l2_try_format(stream, fmt, &probe, &format, &frame);
if (ret < 0)
return ret;
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_allocated(&stream->queue)) {
+ ret = -EBUSY;
+ goto done;
+ }
+
memcpy(&stream->ctrl, &probe, sizeof probe);
stream->cur_format = format;
stream->cur_frame = frame;
- return 0;
+done:
+ mutex_unlock(&stream->mutex);
+ return ret;
}
static int uvc_v4l2_get_streamparm(struct uvc_streaming *stream,
if (parm->type != stream->type)
return -EINVAL;
+ mutex_lock(&stream->mutex);
numerator = stream->ctrl.dwFrameInterval;
+ mutex_unlock(&stream->mutex);
+
denominator = 10000000;
uvc_simplify_fraction(&numerator, &denominator, 8, 333);
static int uvc_v4l2_set_streamparm(struct uvc_streaming *stream,
struct v4l2_streamparm *parm)
{
- struct uvc_frame *frame = stream->cur_frame;
struct uvc_streaming_control probe;
struct v4l2_fract timeperframe;
uint32_t interval;
if (parm->type != stream->type)
return -EINVAL;
- if (uvc_queue_streaming(&stream->queue))
- return -EBUSY;
-
if (parm->type == V4L2_BUF_TYPE_VIDEO_CAPTURE)
timeperframe = parm->parm.capture.timeperframe;
else
timeperframe = parm->parm.output.timeperframe;
- memcpy(&probe, &stream->ctrl, sizeof probe);
interval = uvc_fraction_to_interval(timeperframe.numerator,
timeperframe.denominator);
-
uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n",
timeperframe.numerator, timeperframe.denominator, interval);
- probe.dwFrameInterval = uvc_try_frame_interval(frame, interval);
+
+ mutex_lock(&stream->mutex);
+
+ if (uvc_queue_streaming(&stream->queue)) {
+ mutex_unlock(&stream->mutex);
+ return -EBUSY;
+ }
+
+ memcpy(&probe, &stream->ctrl, sizeof probe);
+ probe.dwFrameInterval =
+ uvc_try_frame_interval(stream->cur_frame, interval);
/* Probe the device with the new settings. */
ret = uvc_probe_video(stream, &probe);
- if (ret < 0)
+ if (ret < 0) {
+ mutex_unlock(&stream->mutex);
return ret;
+ }
memcpy(&stream->ctrl, &probe, sizeof probe);
+ mutex_unlock(&stream->mutex);
/* Return the actual frame period. */
timeperframe.numerator = probe.dwFrameInterval;
if (uvc_has_privileges(handle)) {
uvc_video_enable(stream, 0);
- mutex_lock(&stream->queue.mutex);
if (uvc_free_buffers(&stream->queue) < 0)
uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to "
"free buffers.\n");
- mutex_unlock(&stream->queue.mutex);
}
/* Release the file handle. */
}
case VIDIOC_QUERYMENU:
- return uvc_v4l2_query_menu(chain, arg);
+ return uvc_query_v4l2_menu(chain, arg);
case VIDIOC_G_EXT_CTRLS:
{
case VIDIOC_CROPCAP:
{
struct v4l2_cropcap *ccap = arg;
- struct uvc_frame *frame = stream->cur_frame;
if (ccap->type != stream->type)
return -EINVAL;
ccap->bounds.left = 0;
ccap->bounds.top = 0;
- ccap->bounds.width = frame->wWidth;
- ccap->bounds.height = frame->wHeight;
+
+ mutex_lock(&stream->mutex);
+ ccap->bounds.width = stream->cur_frame->wWidth;
+ ccap->bounds.height = stream->cur_frame->wHeight;
+ mutex_unlock(&stream->mutex);
ccap->defrect = ccap->bounds;
case VIDIOC_REQBUFS:
{
struct v4l2_requestbuffers *rb = arg;
- unsigned int bufsize =
- stream->ctrl.dwMaxVideoFrameSize;
if (rb->type != stream->type ||
rb->memory != V4L2_MEMORY_MMAP)
if ((ret = uvc_acquire_privileges(handle)) < 0)
return ret;
- ret = uvc_alloc_buffers(&stream->queue, rb->count, bufsize);
+ mutex_lock(&stream->mutex);
+ ret = uvc_alloc_buffers(&stream->queue, rb->count,
+ stream->ctrl.dwMaxVideoFrameSize);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
if (!uvc_has_privileges(handle))
return -EBUSY;
+ mutex_lock(&stream->mutex);
ret = uvc_video_enable(stream, 1);
+ mutex_unlock(&stream->mutex);
if (ret < 0)
return ret;
break;
return -EINVAL;
}
-/*
- * VMA operations.
- */
-static void uvc_vm_open(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count++;
-}
-
-static void uvc_vm_close(struct vm_area_struct *vma)
-{
- struct uvc_buffer *buffer = vma->vm_private_data;
- buffer->vma_use_count--;
-}
-
-static const struct vm_operations_struct uvc_vm_ops = {
- .open = uvc_vm_open,
- .close = uvc_vm_close,
-};
-
static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma)
{
struct uvc_fh *handle = file->private_data;
struct uvc_streaming *stream = handle->stream;
- struct uvc_video_queue *queue = &stream->queue;
- struct uvc_buffer *uninitialized_var(buffer);
- struct page *page;
- unsigned long addr, start, size;
- unsigned int i;
- int ret = 0;
uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n");
- start = vma->vm_start;
- size = vma->vm_end - vma->vm_start;
-
- mutex_lock(&queue->mutex);
-
- for (i = 0; i < queue->count; ++i) {
- buffer = &queue->buffer[i];
- if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff)
- break;
- }
-
- if (i == queue->count || size != queue->buf_size) {
- ret = -EINVAL;
- goto done;
- }
-
- /*
- * VM_IO marks the area as being an mmaped region for I/O to a
- * device. It also prevents the region from being core dumped.
- */
- vma->vm_flags |= VM_IO;
-
- addr = (unsigned long)queue->mem + buffer->buf.m.offset;
- while (size > 0) {
- page = vmalloc_to_page((void *)addr);
- if ((ret = vm_insert_page(vma, start, page)) < 0)
- goto done;
-
- start += PAGE_SIZE;
- addr += PAGE_SIZE;
- size -= PAGE_SIZE;
- }
-
- vma->vm_ops = &uvc_vm_ops;
- vma->vm_private_data = buffer;
- uvc_vm_open(vma);
-
-done:
- mutex_unlock(&queue->mutex);
- return ret;
+ return uvc_queue_mmap(&stream->queue, vma);
}
static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait)
.owner = THIS_MODULE,
.open = uvc_v4l2_open,
.release = uvc_v4l2_release,
- .ioctl = uvc_v4l2_ioctl,
+ .unlocked_ioctl = uvc_v4l2_ioctl,
.read = uvc_v4l2_read,
.mmap = uvc_v4l2_mmap,
.poll = uvc_v4l2_poll,
unsigned int i;
int ret;
- mutex_lock(&stream->mutex);
-
/* Perform probing. The device should adjust the requested values
* according to its capabilities. However, some devices, namely the
* first generation UVC Logitech webcams, don't implement the Video
}
done:
- mutex_unlock(&stream->mutex);
return ret;
}
struct uvc_streaming_control ctrl;
struct uvc_format *cur_format;
struct uvc_frame *cur_frame;
-
+ /* Protect access to ctrl, cur_format, cur_frame and hardware video
+ * probe control.
+ */
struct mutex mutex;
unsigned int frozen : 1;
extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect);
extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue,
struct uvc_buffer *buf);
+extern int uvc_queue_mmap(struct uvc_video_queue *queue,
+ struct vm_area_struct *vma);
extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue,
struct file *file, poll_table *wait);
extern int uvc_queue_allocated(struct uvc_video_queue *queue);
extern int uvc_status_resume(struct uvc_device *dev);
/* Controls */
-extern struct uvc_control *uvc_find_control(struct uvc_video_chain *chain,
- __u32 v4l2_id, struct uvc_control_mapping **mapping);
extern int uvc_query_v4l2_ctrl(struct uvc_video_chain *chain,
struct v4l2_queryctrl *v4l2_ctrl);
+extern int uvc_query_v4l2_menu(struct uvc_video_chain *chain,
+ struct v4l2_querymenu *query_menu);
extern int uvc_ctrl_add_mapping(struct uvc_video_chain *chain,
const struct uvc_control_mapping *mapping);
/* Load an i2c sub-device. */
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs)
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs)
{
struct v4l2_subdev *sd = NULL;
struct i2c_client *client;
BUG_ON(!v4l2_dev);
- if (module_name)
- request_module(module_name);
- else
- request_module(I2C_MODULE_PREFIX "%s", info->type);
+ request_module(I2C_MODULE_PREFIX "%s", info->type);
/* Create the i2c client */
if (info->addr == 0 && probe_addrs)
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_board);
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs)
{
info.irq = irq;
info.platform_data = platform_data;
- return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, module_name,
- &info, probe_addrs);
+ return v4l2_i2c_new_subdev_board(v4l2_dev, adapter, &info, probe_addrs);
}
EXPORT_SYMBOL_GPL(v4l2_i2c_new_subdev_cfg);
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->read)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->read(filp, buf, sz, off);
if (vdev->lock)
size_t sz, loff_t *off)
{
struct video_device *vdev = video_devdata(filp);
- int ret = -EIO;
+ int ret = -ENODEV;
if (!vdev->fops->write)
return -EINVAL;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->write(filp, buf, sz, off);
if (vdev->lock)
static unsigned int v4l2_poll(struct file *filp, struct poll_table_struct *poll)
{
struct video_device *vdev = video_devdata(filp);
- int ret = DEFAULT_POLLMASK;
+ int ret = POLLERR | POLLHUP;
if (!vdev->fops->poll)
- return ret;
+ return DEFAULT_POLLMASK;
if (vdev->lock)
mutex_lock(vdev->lock);
if (video_is_registered(vdev))
int ret = -ENODEV;
if (vdev->fops->unlocked_ioctl) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->unlocked_ioctl(filp, cmd, arg);
if (vdev->lock)
mutex_unlock(vdev->lock);
} else if (vdev->fops->ioctl) {
- /* TODO: convert all drivers to unlocked_ioctl */
+ /* This code path is a replacement for the BKL. It is a major
+ * hack but it will have to do for those drivers that are not
+ * yet converted to use unlocked_ioctl.
+ *
+ * There are two options: if the driver implements struct
+ * v4l2_device, then the lock defined there is used to
+ * serialize the ioctls. Otherwise the v4l2 core lock defined
+ * below is used. This lock is really bad since it serializes
+ * completely independent devices.
+ *
+ * Both variants suffer from the same problem: if the driver
+ * sleeps, then it blocks all ioctls since the lock is still
+ * held. This is very common for VIDIOC_DQBUF since that
+ * normally waits for a frame to arrive. As a result any other
+ * ioctl calls will proceed very, very slowly since each call
+ * will have to wait for the VIDIOC_QBUF to finish. Things that
+ * should take 0.01s may now take 10-20 seconds.
+ *
+ * The workaround is to *not* take the lock for VIDIOC_DQBUF.
+ * This actually works OK for videobuf-based drivers, since
+ * videobuf will take its own internal lock.
+ */
static DEFINE_MUTEX(v4l2_ioctl_mutex);
+ struct mutex *m = vdev->v4l2_dev ?
+ &vdev->v4l2_dev->ioctl_lock : &v4l2_ioctl_mutex;
- mutex_lock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF && mutex_lock_interruptible(m))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->ioctl(filp, cmd, arg);
- mutex_unlock(&v4l2_ioctl_mutex);
+ if (cmd != VIDIOC_DQBUF)
+ mutex_unlock(m);
} else
ret = -ENOTTY;
if (!vdev->fops->mmap)
return ret;
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock))
+ return -ERESTARTSYS;
if (video_is_registered(vdev))
ret = vdev->fops->mmap(filp, vm);
if (vdev->lock)
mutex_lock(&videodev_lock);
vdev = video_devdata(filp);
/* return ENODEV if the video device has already been removed. */
- if (vdev == NULL) {
+ if (vdev == NULL || !video_is_registered(vdev)) {
mutex_unlock(&videodev_lock);
return -ENODEV;
}
video_get(vdev);
mutex_unlock(&videodev_lock);
if (vdev->fops->open) {
- if (vdev->lock)
- mutex_lock(vdev->lock);
+ if (vdev->lock && mutex_lock_interruptible(vdev->lock)) {
+ ret = -ERESTARTSYS;
+ goto err;
+ }
if (video_is_registered(vdev))
ret = vdev->fops->open(filp);
else
mutex_unlock(vdev->lock);
}
+err:
/* decrease the refcount in case of an error */
if (ret)
video_put(vdev);
if (!vdev || !video_is_registered(vdev))
return;
+ mutex_lock(&videodev_lock);
+ /* This must be in a critical section to prevent a race with v4l2_open.
+ * Once this bit has been cleared video_get may never be called again.
+ */
clear_bit(V4L2_FL_REGISTERED, &vdev->flags);
+ mutex_unlock(&videodev_lock);
device_unregister(&vdev->dev);
}
EXPORT_SYMBOL(video_unregister_device);
INIT_LIST_HEAD(&v4l2_dev->subdevs);
spin_lock_init(&v4l2_dev->lock);
+ mutex_init(&v4l2_dev->ioctl_lock);
v4l2_dev->dev = dev;
if (dev == NULL) {
/* If dev == NULL, then name must be filled in by the caller */
*/
sensor_adapter = viafb_find_i2c_adapter(VIA_PORT_31);
cam->sensor = v4l2_i2c_new_subdev(&cam->v4l2_dev, sensor_adapter,
- "ov7670", "ov7670", 0x42 >> 1, NULL);
+ "ov7670", 0x42 >> 1, NULL);
if (cam->sensor == NULL) {
dev_err(&pdev->dev, "Unable to find the sensor!\n");
ret = -ENODEV;
vino_drvdata->decoder =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "saa7191", 0, I2C_ADDRS(0x45));
+ "saa7191", 0, I2C_ADDRS(0x45));
vino_drvdata->camera =
v4l2_i2c_new_subdev(&vino_drvdata->v4l2_dev, &vino_i2c_adapter,
- NULL, "indycam", 0, I2C_ADDRS(0x2b));
+ "indycam", 0, I2C_ADDRS(0x2b));
dprintk("init complete!\n");
static const struct v4l2_file_operations w9966_fops = {
.owner = THIS_MODULE,
- .ioctl = video_ioctl2,
+ .unlocked_ioctl = video_ioctl2,
.read = w9966_v4l_read,
};
}
zr->decoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter, NULL, zr->card.i2c_decoder,
+ &zr->i2c_adapter, zr->card.i2c_decoder,
0, zr->card.addrs_decoder);
if (zr->card.i2c_encoder)
zr->encoder = v4l2_i2c_new_subdev(&zr->v4l2_dev,
- &zr->i2c_adapter,
- NULL, zr->card.i2c_encoder,
+ &zr->i2c_adapter, zr->card.i2c_encoder,
0, zr->card.addrs_encoder);
dprintk(2,
static const char *probes[] = { "RedBoot", "cmdlinepart", NULL };
-static int __init pxa2xx_flash_probe(struct platform_device *pdev)
+static int __devinit pxa2xx_flash_probe(struct platform_device *pdev)
{
struct flash_platform_data *flash = pdev->dev.platform_data;
struct pxa2xx_flash_info *info;
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
-#define CONFIG_MTD_NAND_OMAP_HWECC
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
uint32_t data = 0;
struct ubi_vid_hdr vid_hdr;
- addr = (loff_t)pnum * ubi->peb_size + ubi->vid_hdr_aloffset;
+ /*
+ * It is important to first invalidate the EC header, and then the VID
+ * header. Otherwise a power cut may lead to valid EC header and
+ * invalid VID header, in which case UBI will treat this PEB as
+ * corrupted and will try to preserve it, and print scary warnings (see
+ * the header comment in scan.c for more information).
+ */
+ addr = (loff_t)pnum * ubi->peb_size;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written, (void *)&data);
if (!err) {
- addr -= ubi->vid_hdr_aloffset;
+ addr += ubi->vid_hdr_aloffset;
err = ubi->mtd->write(ubi->mtd, addr, 4, &written,
(void *)&data);
if (!err)
/*
* We failed to write to the media. This was observed with Spansion
- * S29GL512N NOR flash. Most probably the eraseblock erasure was
- * interrupted at a very inappropriate moment, so it became unwritable.
- * In this case we probably anyway have garbage in this PEB.
+ * S29GL512N NOR flash. Most probably the previously eraseblock erasure
+ * was interrupted at a very inappropriate moment, so it became
+ * unwritable. In this case we probably anyway have garbage in this
+ * PEB.
*/
err1 = ubi_io_read_vid_hdr(ubi, pnum, &vid_hdr, 0);
- if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
- /*
- * The VID header is corrupted, so we can safely erase this
- * PEB and not afraid that it will be treated as a valid PEB in
- * case of an unclean reboot.
- */
- return 0;
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR) {
+ struct ubi_ec_hdr ec_hdr;
+
+ err1 = ubi_io_read_ec_hdr(ubi, pnum, &ec_hdr, 0);
+ if (err1 == UBI_IO_BAD_HDR_EBADMSG || err1 == UBI_IO_BAD_HDR)
+ /*
+ * Both VID and EC headers are corrupted, so we can
+ * safely erase this PEB and not afraid that it will be
+ * treated as a valid PEB in case of an unclean reboot.
+ */
+ return 0;
+ }
/*
* The PEB contains a valid VID header, but we cannot invalidate it.
* impossible to distinguish it from a PEB which just
* contains garbage because of a power cut during erase
* operation. So we just schedule this PEB for erasure.
+ *
+ * Besides, in case of NOR flash, we deliberatly
+ * corrupt both headers because NOR flash erasure is
+ * slow and can start from the end.
*/
err = 0;
else
depends on PCI
select MII
---help---
- This is a gigabit ethernet driver for Topcliff PCH.
- Topcliff PCH is the platform controller hub that is used in Intel's
+ This is a gigabit ethernet driver for EG20T PCH.
+ EG20T PCH is the platform controller hub that is used in Intel's
general embedded platform.
- Topcliff PCH has Gigabit Ethernet interface.
+ EG20T PCH has Gigabit Ethernet interface.
Using this interface, it is able to access system devices connected
to Gigabit Ethernet.
This driver enables Gigabit Ethernet function.
spin_lock_irqsave(&aup->lock, flags);
if (force_reset || (!aup->mac_enabled)) {
- writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
au_sync_delay(2);
writel((MAC_EN_RESET0 | MAC_EN_RESET1 | MAC_EN_RESET2
- | MAC_EN_CLOCK_ENABLE), &aup->enable);
+ | MAC_EN_CLOCK_ENABLE), aup->enable);
au_sync_delay(2);
aup->mac_enabled = 1;
au1000_hard_stop(dev);
- writel(MAC_EN_CLOCK_ENABLE, &aup->enable);
+ writel(MAC_EN_CLOCK_ENABLE, aup->enable);
au_sync_delay(2);
- writel(0, &aup->enable);
+ writel(0, aup->enable);
au_sync_delay(2);
aup->tx_full = 0;
/* set a random MAC now in case platform_data doesn't provide one */
random_ether_addr(dev->dev_addr);
- writel(0, &aup->enable);
+ writel(0, aup->enable);
aup->mac_enabled = 0;
pd = pdev->dev.platform_data;
__b44_set_flow_ctrl(bp, pause_enab);
}
-#ifdef SSB_DRIVER_MIPS
-extern char *nvram_get(char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
static void b44_wap54g10_workaround(struct b44 *bp)
{
- const char *str;
+ char buf[20];
u32 val;
int err;
* see https://dev.openwrt.org/ticket/146
* check and reset bit "isolate"
*/
- str = nvram_get("boardnum");
- if (!str)
+ if (nvram_getenv("boardnum", buf, sizeof(buf)) < 0)
return;
- if (simple_strtoul(str, NULL, 0) == 2) {
+ if (simple_strtoul(buf, NULL, 0) == 2) {
err = __b44_readphy(bp, 0, MII_BMCR, &val);
if (err)
goto error;
i = 0;
netdev_for_each_mc_addr(ha, netdev)
- memcpy(req->mac[i].byte, ha->addr, ETH_ALEN);
+ memcpy(req->mac[i++].byte, ha->addr, ETH_ALEN);
} else {
req->promiscuous = 1;
}
* (you will need to reboot afterwards) */
/* #define BNX2X_STOP_ON_ERROR */
-#define DRV_MODULE_VERSION "1.60.00-4"
-#define DRV_MODULE_RELDATE "2010/11/01"
+#define DRV_MODULE_VERSION "1.60.01-0"
+#define DRV_MODULE_RELDATE "2010/11/12"
#define BNX2X_BC_VER 0x040200
#define BNX2X_MULTI_QUEUE
}
#endif
-static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+static inline void bnx2x_set_pbd_gso_e2(struct sk_buff *skb, u32 *parsing_data,
+ u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(skb_shinfo(skb)->gso_size) <<
- ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT;
+ *parsing_data |= (skb_shinfo(skb)->gso_size <<
+ ETH_TX_PARSE_BD_E2_LSO_MSS_SHIFT) &
+ ETH_TX_PARSE_BD_E2_LSO_MSS;
if ((xmit_type & XMIT_GSO_V6) &&
(ipv6_hdr(skb)->nexthdr == NEXTHDR_IPV6))
- pbd->parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
+ *parsing_data |= ETH_TX_PARSE_BD_E2_IPV6_WITH_EXT_HDR;
}
/**
* @return header len
*/
static inline u8 bnx2x_set_pbd_csum_e2(struct bnx2x *bp, struct sk_buff *skb,
- struct eth_tx_parse_bd_e2 *pbd,
- u32 xmit_type)
+ u32 *parsing_data, u32 xmit_type)
{
- pbd->parsing_data |= cpu_to_le16(tcp_hdrlen(skb)/4) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT;
+ *parsing_data |= ((tcp_hdrlen(skb)/4) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_LENGTH_DW;
- pbd->parsing_data |= cpu_to_le16(((unsigned char *)tcp_hdr(skb) -
- skb->data) / 2) <<
- ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT;
+ *parsing_data |= ((((u8 *)tcp_hdr(skb) - skb->data) / 2) <<
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W_SHIFT) &
+ ETH_TX_PARSE_BD_E2_TCP_HDR_START_OFFSET_W;
return skb_transport_header(skb) + tcp_hdrlen(skb) - skb->data;
}
struct eth_tx_bd *tx_data_bd, *total_pkt_bd = NULL;
struct eth_tx_parse_bd_e1x *pbd_e1x = NULL;
struct eth_tx_parse_bd_e2 *pbd_e2 = NULL;
+ u32 pbd_e2_parsing_data = 0;
u16 pkt_prod, bd_prod;
int nbd, fp_index;
dma_addr_t mapping;
memset(pbd_e2, 0, sizeof(struct eth_tx_parse_bd_e2));
/* Set PBD in checksum offload case */
if (xmit_type & XMIT_CSUM)
- hlen = bnx2x_set_pbd_csum_e2(bp,
- skb, pbd_e2, xmit_type);
+ hlen = bnx2x_set_pbd_csum_e2(bp, skb,
+ &pbd_e2_parsing_data,
+ xmit_type);
} else {
pbd_e1x = &fp->tx_desc_ring[bd_prod].parse_bd_e1x;
memset(pbd_e1x, 0, sizeof(struct eth_tx_parse_bd_e1x));
bd_prod = bnx2x_tx_split(bp, fp, tx_buf, &tx_start_bd,
hlen, bd_prod, ++nbd);
if (CHIP_IS_E2(bp))
- bnx2x_set_pbd_gso_e2(skb, pbd_e2, xmit_type);
+ bnx2x_set_pbd_gso_e2(skb, &pbd_e2_parsing_data,
+ xmit_type);
else
bnx2x_set_pbd_gso(skb, pbd_e1x, xmit_type);
}
+
+ /* Set the PBD's parsing_data field if not zero
+ * (for the chips newer than 57711).
+ */
+ if (pbd_e2_parsing_data)
+ pbd_e2->parsing_data = cpu_to_le32(pbd_e2_parsing_data);
+
tx_data_bd = (struct eth_tx_bd *)tx_start_bd;
/* Handle fragmented skb */
/****************************************************************************
* SRC initializations
****************************************************************************/
-
+#ifdef BCM_CNIC
/* called during init func stage */
static void bnx2x_src_init_t2(struct bnx2x *bp, struct src_ent *t2,
dma_addr_t t2_mapping, int src_cid_count)
U64_HI((u64)t2_mapping +
(src_cid_count-1) * sizeof(struct src_ent)));
}
-
+#endif
#endif /* BNX2X_INIT_OPS_H */
/*----------------------------- Global variables ----------------------------*/
#ifdef CONFIG_NET_POLL_CONTROLLER
-cpumask_var_t netpoll_block_tx;
+atomic_t netpoll_block_tx = ATOMIC_INIT(0);
#endif
static const char * const version =
/* If this is the first slave, then we need to set the master's hardware
* address to be the same as the slave's. */
- if (bond->slave_cnt == 0)
+ if (is_zero_ether_addr(bond->dev->dev_addr))
memcpy(bond->dev->dev_addr, slave_dev->dev_addr,
slave_dev->addr_len);
if (res)
goto out;
-#ifdef CONFIG_NET_POLL_CONTROLLER
- if (!alloc_cpumask_var(&netpoll_block_tx, GFP_KERNEL)) {
- res = -ENOMEM;
- goto out;
- }
-#endif
-
res = register_pernet_subsys(&bond_net_ops);
if (res)
goto out;
rtnl_link_unregister(&bond_link_ops);
err_link:
unregister_pernet_subsys(&bond_net_ops);
-#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
-#endif
goto out;
}
unregister_pernet_subsys(&bond_net_ops);
#ifdef CONFIG_NET_POLL_CONTROLLER
- free_cpumask_var(netpoll_block_tx);
+ /*
+ * Make sure we don't have an imbalance on our netpoll blocking
+ */
+ WARN_ON(atomic_read(&netpoll_block_tx));
#endif
}
#ifdef CONFIG_NET_POLL_CONTROLLER
-extern cpumask_var_t netpoll_block_tx;
+extern atomic_t netpoll_block_tx;
static inline void block_netpoll_tx(void)
{
- preempt_disable();
- BUG_ON(cpumask_test_and_set_cpu(smp_processor_id(),
- netpoll_block_tx));
+ atomic_inc(&netpoll_block_tx);
}
static inline void unblock_netpoll_tx(void)
{
- BUG_ON(!cpumask_test_and_clear_cpu(smp_processor_id(),
- netpoll_block_tx));
- preempt_enable();
+ atomic_dec(&netpoll_block_tx);
}
static inline int is_netpoll_tx_blocked(struct net_device *dev)
{
if (unlikely(dev->priv_flags & IFF_IN_NETPOLL))
- return cpumask_test_cpu(smp_processor_id(), netpoll_block_tx);
+ return atomic_read(&netpoll_block_tx);
return 0;
}
#else
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/version.h>
#include <linux/init.h>
* License terms: GNU General Public License (GPL) version 2
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":" __func__ "():" fmt
+#define pr_fmt(fmt) KBUILD_MODNAME ":" fmt
#include <linux/spinlock.h>
#include <linux/sched.h>
if (index < NEXACT_MAC)
ret++;
else if (hash)
- *hash |= (1 << hash_mac_addr(addr[i]));
+ *hash |= (1ULL << hash_mac_addr(addr[i]));
}
return ret;
}
}
/*
- * Collect up to maxaddrs worth of a netdevice's unicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's unicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
*/
-static inline int collect_netdev_uc_list_addrs(const struct net_device *dev,
- const u8 **addr,
- unsigned int maxaddrs)
+static inline unsigned int collect_netdev_uc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int offset,
+ unsigned int maxaddrs)
{
+ unsigned int index = 0;
unsigned int naddr = 0;
const struct netdev_hw_addr *ha;
- for_each_dev_addr(dev, ha) {
- addr[naddr++] = ha->addr;
- if (naddr >= maxaddrs)
- break;
- }
+ for_each_dev_addr(dev, ha)
+ if (index++ >= offset) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
return naddr;
}
/*
- * Collect up to maxaddrs worth of a netdevice's multicast addresses into an
- * array of addrss pointers and return the number collected.
+ * Collect up to maxaddrs worth of a netdevice's multicast addresses, starting
+ * at a specified offset within the list, into an array of addrss pointers and
+ * return the number collected.
*/
-static inline int collect_netdev_mc_list_addrs(const struct net_device *dev,
- const u8 **addr,
- unsigned int maxaddrs)
+static inline unsigned int collect_netdev_mc_list_addrs(const struct net_device *dev,
+ const u8 **addr,
+ unsigned int offset,
+ unsigned int maxaddrs)
{
+ unsigned int index = 0;
unsigned int naddr = 0;
const struct netdev_hw_addr *ha;
- netdev_for_each_mc_addr(ha, dev) {
- addr[naddr++] = ha->addr;
- if (naddr >= maxaddrs)
- break;
- }
+ netdev_for_each_mc_addr(ha, dev)
+ if (index++ >= offset) {
+ addr[naddr++] = ha->addr;
+ if (naddr >= maxaddrs)
+ break;
+ }
return naddr;
}
u64 mhash = 0;
u64 uhash = 0;
bool free = true;
- u16 filt_idx[7];
+ unsigned int offset, naddr;
const u8 *addr[7];
- int ret, naddr = 0;
+ int ret;
const struct port_info *pi = netdev_priv(dev);
/* first do the secondary unicast addresses */
- naddr = collect_netdev_uc_list_addrs(dev, addr, ARRAY_SIZE(addr));
- if (naddr > 0) {
+ for (offset = 0; ; offset += naddr) {
+ naddr = collect_netdev_uc_list_addrs(dev, addr, offset,
+ ARRAY_SIZE(addr));
+ if (naddr == 0)
+ break;
+
ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
- naddr, addr, filt_idx, &uhash, sleep);
+ naddr, addr, NULL, &uhash, sleep);
if (ret < 0)
return ret;
}
/* next set up the multicast addresses */
- naddr = collect_netdev_mc_list_addrs(dev, addr, ARRAY_SIZE(addr));
- if (naddr > 0) {
+ for (offset = 0; ; offset += naddr) {
+ naddr = collect_netdev_mc_list_addrs(dev, addr, offset,
+ ARRAY_SIZE(addr));
+ if (naddr == 0)
+ break;
+
ret = t4vf_alloc_mac_filt(pi->adapter, pi->viid, free,
- naddr, addr, filt_idx, &mhash, sleep);
+ naddr, addr, NULL, &mhash, sleep);
if (ret < 0)
return ret;
+ free = false;
}
return t4vf_set_addr_hash(pi->adapter, pi->viid, uhash != 0,
{
struct sge *s = &adapter->sge;
int q10g, n10g, qidx, pidx, qs;
+ size_t iqe_size;
/*
* We should not be called till we know how many Queue Sets we can
}
s->ethqsets = qidx;
+ /*
+ * The Ingress Queue Entry Size for our various Response Queues needs
+ * to be big enough to accommodate the largest message we can receive
+ * from the chip/firmware; which is 64 bytes ...
+ */
+ iqe_size = 64;
+
/*
* Set up default Queue Set parameters ... Start off with the
* shortest interrupt holdoff timer.
struct sge_eth_rxq *rxq = &s->ethrxq[qs];
struct sge_eth_txq *txq = &s->ethtxq[qs];
- init_rspq(&rxq->rspq, 0, 0, 1024, L1_CACHE_BYTES);
+ init_rspq(&rxq->rspq, 0, 0, 1024, iqe_size);
rxq->fl.size = 72;
txq->q.size = 1024;
}
* The firmware event queue is used for link state changes and
* notifications of TX DMA completions.
*/
- init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512,
- L1_CACHE_BYTES);
+ init_rspq(&s->fw_evtq, SGE_TIMER_RSTRT_CNTR, 0, 512, iqe_size);
/*
* The forwarded interrupt queue is used when we're in MSI interrupt
* any time ...
*/
init_rspq(&s->intrq, SGE_TIMER_RSTRT_CNTR, 0, MSIX_ENTRIES + 1,
- L1_CACHE_BYTES);
+ iqe_size);
}
/*
unsigned int naddr, const u8 **addr, u16 *idx,
u64 *hash, bool sleep_ok)
{
- int i, ret;
+ int offset, ret = 0;
+ unsigned nfilters = 0;
+ unsigned int rem = naddr;
struct fw_vi_mac_cmd cmd, rpl;
- struct fw_vi_mac_exact *p;
- size_t len16;
- if (naddr > ARRAY_SIZE(cmd.u.exact))
+ if (naddr > FW_CLS_TCAM_NUM_ENTRIES)
return -EINVAL;
- len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
- u.exact[naddr]), 16);
- memset(&cmd, 0, sizeof(cmd));
- cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
- FW_CMD_REQUEST |
- FW_CMD_WRITE |
- (free ? FW_CMD_EXEC : 0) |
- FW_VI_MAC_CMD_VIID(viid));
- cmd.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
- FW_CMD_LEN16(len16));
+ for (offset = 0; offset < naddr; /**/) {
+ unsigned int fw_naddr = (rem < ARRAY_SIZE(cmd.u.exact)
+ ? rem
+ : ARRAY_SIZE(cmd.u.exact));
+ size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
+ u.exact[fw_naddr]), 16);
+ struct fw_vi_mac_exact *p;
+ int i;
- for (i = 0, p = cmd.u.exact; i < naddr; i++, p++) {
- p->valid_to_idx =
- cpu_to_be16(FW_VI_MAC_CMD_VALID |
- FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
- memcpy(p->macaddr, addr[i], sizeof(p->macaddr));
- }
+ memset(&cmd, 0, sizeof(cmd));
+ cmd.op_to_viid = cpu_to_be32(FW_CMD_OP(FW_VI_MAC_CMD) |
+ FW_CMD_REQUEST |
+ FW_CMD_WRITE |
+ (free ? FW_CMD_EXEC : 0) |
+ FW_VI_MAC_CMD_VIID(viid));
+ cmd.freemacs_to_len16 =
+ cpu_to_be32(FW_VI_MAC_CMD_FREEMACS(free) |
+ FW_CMD_LEN16(len16));
+
+ for (i = 0, p = cmd.u.exact; i < fw_naddr; i++, p++) {
+ p->valid_to_idx = cpu_to_be16(
+ FW_VI_MAC_CMD_VALID |
+ FW_VI_MAC_CMD_IDX(FW_VI_MAC_ADD_MAC));
+ memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
+ }
+
+
+ ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl,
+ sleep_ok);
+ if (ret && ret != -ENOMEM)
+ break;
- ret = t4vf_wr_mbox_core(adapter, &cmd, sizeof(cmd), &rpl, sleep_ok);
- if (ret)
- return ret;
-
- for (i = 0, p = rpl.u.exact; i < naddr; i++, p++) {
- u16 index = FW_VI_MAC_CMD_IDX_GET(be16_to_cpu(p->valid_to_idx));
-
- if (idx)
- idx[i] = (index >= FW_CLS_TCAM_NUM_ENTRIES
- ? 0xffff
- : index);
- if (index < FW_CLS_TCAM_NUM_ENTRIES)
- ret++;
- else if (hash)
- *hash |= (1 << hash_mac_addr(addr[i]));
+ for (i = 0, p = rpl.u.exact; i < fw_naddr; i++, p++) {
+ u16 index = FW_VI_MAC_CMD_IDX_GET(
+ be16_to_cpu(p->valid_to_idx));
+
+ if (idx)
+ idx[offset+i] =
+ (index >= FW_CLS_TCAM_NUM_ENTRIES
+ ? 0xffff
+ : index);
+ if (index < FW_CLS_TCAM_NUM_ENTRIES)
+ nfilters++;
+ else if (hash)
+ *hash |= (1ULL << hash_mac_addr(addr[offset+i]));
+ }
+
+ free = false;
+ offset += fw_naddr;
+ rem -= fw_naddr;
}
+
+ /*
+ * If there were no errors or we merely ran out of room in our MAC
+ * address arena, return the number of filters actually written.
+ */
+ if (ret == 0 || ret == -ENOMEM)
+ ret = nfilters;
return ret;
}
}
+static int ehea_set_flags(struct net_device *dev, u32 data)
+{
+ return ethtool_op_set_flags(dev, data, ETH_FLAG_LRO
+ | ETH_FLAG_TXVLAN
+ | ETH_FLAG_RXVLAN);
+}
+
const struct ethtool_ops ehea_ethtool_ops = {
.get_settings = ehea_get_settings,
.get_drvinfo = ehea_get_drvinfo,
.get_ethtool_stats = ehea_get_ethtool_stats,
.get_rx_csum = ehea_get_rx_csum,
.set_settings = ehea_set_settings,
+ .get_flags = ethtool_op_get_flags,
+ .set_flags = ehea_set_flags,
.nway_reset = ehea_nway_reset, /* Restart autonegotiation */
};
skb_arr_rq1[index] = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
if (!skb_arr_rq1[index]) {
+ ehea_info("Unable to allocate enough skb in the array\n");
pr->rq1_skba.os_skbs = fill_wqes - i;
break;
}
struct net_device *dev = pr->port->netdev;
int i;
- for (i = 0; i < pr->rq1_skba.len; i++) {
+ if (nr_rq1a > pr->rq1_skba.len) {
+ ehea_error("NR_RQ1A bigger than skb array len\n");
+ return;
+ }
+
+ for (i = 0; i < nr_rq1a; i++) {
skb_arr_rq1[i] = netdev_alloc_skb(dev, EHEA_L_PKT_SIZE);
- if (!skb_arr_rq1[i])
+ if (!skb_arr_rq1[i]) {
+ ehea_info("No enough memory to allocate skb array\n");
break;
+ }
}
/* Ring doorbell */
- ehea_update_rq1a(pr->qp, nr_rq1a);
+ ehea_update_rq1a(pr->qp, i);
}
static int ehea_refill_rq_def(struct ehea_port_res *pr,
int vlan_extracted = ((cqe->status & EHEA_CQE_VLAN_TAG_XTRACT) &&
pr->port->vgrp);
- if (use_lro) {
+ if (skb->dev->features & NETIF_F_LRO) {
if (vlan_extracted)
lro_vlan_hwaccel_receive_skb(&pr->lro_mgr, skb,
pr->port->vgrp,
skb = netdev_alloc_skb(dev,
EHEA_L_PKT_SIZE);
- if (!skb)
+ if (!skb) {
+ ehea_info("Not enough memory to allocate skb\n");
break;
+ }
}
skb_copy_to_linear_data(skb, ((char *)cqe) + 64,
cqe->num_bytes_transfered - 4);
}
cqe = ehea_poll_rq1(qp, &wqe_index);
}
- if (use_lro)
+ if (dev->features & NETIF_F_LRO)
lro_flush_all(&pr->lro_mgr);
pr->rx_packets += processed;
| NETIF_F_LLTX;
dev->watchdog_timeo = EHEA_WATCH_DOG_TIMEOUT;
+ if (use_lro)
+ dev->features |= NETIF_F_LRO;
+
INIT_WORK(&port->reset_task, ehea_reset_port);
ret = register_netdev(dev);
case VNIC_DEV_INTR_MODE_MSIX:
for (i = 0; i < enic->rq_count; i++) {
intr = enic_msix_rq_intr(enic, i);
- enic_isr_msix_rq(enic->msix_entry[intr].vector, enic);
+ enic_isr_msix_rq(enic->msix_entry[intr].vector,
+ &enic->napi[i]);
}
intr = enic_msix_wq_intr(enic, i);
enic_isr_msix_wq(enic->msix_entry[intr].vector, enic);
rcu_read_unlock();
dev_kfree_skb(skb);
stats->tx_dropped++;
+ if (skb_queue_len(&dp->tq) != 0)
+ goto resched;
break;
}
rcu_read_unlock();
adapter->rx_ring[i] = NULL;
}
+ adapter->num_tx_queues = 0;
+ adapter->num_rx_queues = 0;
+
ixgbe_free_q_vectors(adapter);
ixgbe_reset_interrupt_capability(adapter);
}
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_BF_REG_SZ_OFFSET);
dev_cap->bf_reg_size = 1 << (field & 0x1f);
MLX4_GET(field, outbox, QUERY_DEV_CAP_LOG_MAX_BF_REGS_PER_PAGE_OFFSET);
+ if ((1 << (field & 0x3f)) > (PAGE_SIZE / dev_cap->bf_reg_size)) {
+ mlx4_warn(dev, "firmware bug: log2 # of blue flame regs is invalid (%d), forcing 3\n", field & 0x1f);
+ field = 3;
+ }
dev_cap->bf_regs_per_page = 1 << (field & 0x3f);
mlx4_dbg(dev, "BlueFlame available (reg size %d, regs/page %d)\n",
dev_cap->bf_reg_size, dev_cap->bf_regs_per_page);
/*
* Copyright (C) 1999 - 2010 Intel Corporation.
- * Copyright (C) 2010 OKI SEMICONDUCTOR Co., LTD.
+ * Copyright (C) 2010 OKI SEMICONDUCTOR CO., LTD.
*
* This code was derived from the Intel e1000e Linux driver.
*
module_init(pch_gbe_init_module);
module_exit(pch_gbe_exit_module);
-MODULE_DESCRIPTION("OKI semiconductor PCH Gigabit ethernet Driver");
-MODULE_AUTHOR("OKI semiconductor, <masa-korg@dsn.okisemi.com>");
+MODULE_DESCRIPTION("EG20T PCH Gigabit ethernet Driver");
+MODULE_AUTHOR("OKI SEMICONDUCTOR, <toshiharu-linux@dsn.okisemi.com>");
MODULE_LICENSE("GPL");
MODULE_VERSION(DRV_VERSION);
MODULE_DEVICE_TABLE(pci, pch_gbe_pcidev_id);
.err = "using default of "
__MODULE_STRING(PCH_GBE_DEFAULT_TXD),
.def = PCH_GBE_DEFAULT_TXD,
- .arg = { .r = { .min = PCH_GBE_MIN_TXD } },
- .arg = { .r = { .max = PCH_GBE_MAX_TXD } }
+ .arg = { .r = { .min = PCH_GBE_MIN_TXD,
+ .max = PCH_GBE_MAX_TXD } }
};
struct pch_gbe_tx_ring *tx_ring = adapter->tx_ring;
tx_ring->count = TxDescriptors;
.err = "using default of "
__MODULE_STRING(PCH_GBE_DEFAULT_RXD),
.def = PCH_GBE_DEFAULT_RXD,
- .arg = { .r = { .min = PCH_GBE_MIN_RXD } },
- .arg = { .r = { .max = PCH_GBE_MAX_RXD } }
+ .arg = { .r = { .min = PCH_GBE_MIN_RXD,
+ .max = PCH_GBE_MAX_RXD } }
};
struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring;
rx_ring->count = RxDescriptors;
config ICPLUS_PHY
tristate "Drivers for ICPlus PHYs"
---help---
- Currently supports the IP175C PHY.
+ Currently supports the IP175C and IP1001 PHYs.
config REALTEK_PHY
tristate "Drivers for Realtek PHYs"
#include <asm/irq.h>
#include <asm/uaccess.h>
-MODULE_DESCRIPTION("ICPlus IP175C PHY driver");
+MODULE_DESCRIPTION("ICPlus IP175C/IC1001 PHY drivers");
MODULE_AUTHOR("Michael Barkowski");
MODULE_LICENSE("GPL");
return 0;
}
+static int ip1001_config_init(struct phy_device *phydev)
+{
+ int err, value;
+
+ /* Software Reset PHY */
+ value = phy_read(phydev, MII_BMCR);
+ value |= BMCR_RESET;
+ err = phy_write(phydev, MII_BMCR, value);
+ if (err < 0)
+ return err;
+
+ do {
+ value = phy_read(phydev, MII_BMCR);
+ } while (value & BMCR_RESET);
+
+ /* Additional delay (2ns) used to adjust RX clock phase
+ * at GMII/ RGMII interface */
+ value = phy_read(phydev, 16);
+ value |= 0x3;
+
+ err = phy_write(phydev, 16, value);
+ if (err < 0)
+ return err;
+
+ return err;
+}
+
static int ip175c_read_status(struct phy_device *phydev)
{
if (phydev->addr == 4) /* WAN port */
.driver = { .owner = THIS_MODULE,},
};
-static int __init ip175c_init(void)
+static struct phy_driver ip1001_driver = {
+ .phy_id = 0x02430d90,
+ .name = "ICPlus IP1001",
+ .phy_id_mask = 0x0ffffff0,
+ .features = PHY_GBIT_FEATURES | SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause,
+ .config_init = &ip1001_config_init,
+ .config_aneg = &genphy_config_aneg,
+ .read_status = &genphy_read_status,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .driver = { .owner = THIS_MODULE,},
+};
+
+static int __init icplus_init(void)
{
+ int ret = 0;
+
+ ret = phy_driver_register(&ip1001_driver);
+ if (ret < 0)
+ return -ENODEV;
+
return phy_driver_register(&ip175c_driver);
}
-static void __exit ip175c_exit(void)
+static void __exit icplus_exit(void)
{
+ phy_driver_unregister(&ip1001_driver);
phy_driver_unregister(&ip175c_driver);
}
-module_init(ip175c_init);
-module_exit(ip175c_exit);
+module_init(icplus_init);
+module_exit(icplus_exit);
static struct mdio_device_id __maybe_unused icplus_tbl[] = {
{ 0x02430d80, 0x0ffffff0 },
+ { 0x02430d90, 0x0ffffff0 },
{ }
};
*/
dev_net_set(dev, net);
- ret = -EEXIST;
mutex_lock(&pn->all_ppp_mutex);
if (unit < 0) {
unit = unit_get(&pn->units_idr, ppp);
if (unit < 0) {
- *retp = unit;
+ ret = unit;
goto out2;
}
} else {
+ ret = -EEXIST;
if (unit_find(&pn->units_idr, unit))
goto out2; /* unit already exists */
/*
ppp->closing = 1;
ppp_unlock(ppp);
unregister_netdev(ppp->dev);
+ unit_put(&pn->units_idr, ppp->file.index);
} else
ppp_unlock(ppp);
- unit_put(&pn->units_idr, ppp->file.index);
ppp->file.dead = 1;
ppp->owner = NULL;
wake_up_interruptible(&ppp->file.rwait);
* by holding all_ppp_mutex
*/
-/* associate pointer with specified number */
-static int unit_set(struct idr *p, void *ptr, int n)
+static int __unit_alloc(struct idr *p, void *ptr, int n)
{
int unit, err;
}
err = idr_get_new_above(p, ptr, n, &unit);
- if (err == -EAGAIN)
- goto again;
+ if (err < 0) {
+ if (err == -EAGAIN)
+ goto again;
+ return err;
+ }
+
+ return unit;
+}
+
+/* associate pointer with specified number */
+static int unit_set(struct idr *p, void *ptr, int n)
+{
+ int unit;
- if (unit != n) {
+ unit = __unit_alloc(p, ptr, n);
+ if (unit < 0)
+ return unit;
+ else if (unit != n) {
idr_remove(p, unit);
return -EINVAL;
}
/* get new free unit number and associate pointer with it */
static int unit_get(struct idr *p, void *ptr)
{
- int unit, err;
-
-again:
- if (!idr_pre_get(p, GFP_KERNEL)) {
- printk(KERN_ERR "PPP: No free memory for idr\n");
- return -ENOMEM;
- }
-
- err = idr_get_new_above(p, ptr, 0, &unit);
- if (err == -EAGAIN)
- goto again;
-
- return unit;
+ return __unit_alloc(p, ptr, 0);
}
/* put unit number back to a pool */
abort:
kfree_skb(skb);
- return 0;
+ return 1;
}
/************************************************************************
u32 mailbox_in;
u32 mailbox_out;
struct mbox_params idc_mbc;
+ struct mutex mpi_mutex;
int tx_ring_size;
int rx_ring_size;
INIT_DELAYED_WORK(&qdev->mpi_idc_work, ql_mpi_idc_work);
INIT_DELAYED_WORK(&qdev->mpi_core_to_log, ql_mpi_core_to_log);
init_completion(&qdev->ide_completion);
+ mutex_init(&qdev->mpi_mutex);
if (!cards_found) {
dev_info(&pdev->dev, "%s\n", DRV_STRING);
int status;
unsigned long count;
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
end:
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
+ mutex_unlock(&qdev->mpi_mutex);
return status;
}
static int ql_set_port_cfg(struct ql_adapter *qdev)
{
int status;
- rtnl_lock();
status = ql_mb_set_port_cfg(qdev);
- rtnl_unlock();
if (status)
return status;
status = ql_idc_wait(qdev);
container_of(work, struct ql_adapter, mpi_port_cfg_work.work);
int status;
- rtnl_lock();
status = ql_mb_get_port_cfg(qdev);
- rtnl_unlock();
if (status) {
netif_err(qdev, drv, qdev->ndev,
"Bug: Failed to get port config data.\n");
u32 aen;
int timeout;
- rtnl_lock();
aen = mbcp->mbox_out[1] >> 16;
timeout = (mbcp->mbox_out[1] >> 8) & 0xf;
}
break;
}
- rtnl_unlock();
}
void ql_mpi_work(struct work_struct *work)
struct mbox_params *mbcp = &mbc;
int err = 0;
- rtnl_lock();
+ mutex_lock(&qdev->mpi_mutex);
/* Begin polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
/* End polled mode for MPI */
ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
- rtnl_unlock();
+ mutex_unlock(&qdev->mpi_mutex);
ql_enable_completion_interrupt(qdev, 0);
}
mdio_write(ioaddr, MII_BMCR, val & 0xffff);
}
-static void rtl8169_check_link_status(struct net_device *dev,
+static void __rtl8169_check_link_status(struct net_device *dev,
struct rtl8169_private *tp,
- void __iomem *ioaddr)
+ void __iomem *ioaddr,
+ bool pm)
{
unsigned long flags;
spin_lock_irqsave(&tp->lock, flags);
if (tp->link_ok(ioaddr)) {
/* This is to cancel a scheduled suspend if there's one. */
- pm_request_resume(&tp->pci_dev->dev);
+ if (pm)
+ pm_request_resume(&tp->pci_dev->dev);
netif_carrier_on(dev);
netif_info(tp, ifup, dev, "link up\n");
} else {
netif_carrier_off(dev);
netif_info(tp, ifdown, dev, "link down\n");
- pm_schedule_suspend(&tp->pci_dev->dev, 100);
+ if (pm)
+ pm_schedule_suspend(&tp->pci_dev->dev, 100);
}
spin_unlock_irqrestore(&tp->lock, flags);
}
+static void rtl8169_check_link_status(struct net_device *dev,
+ struct rtl8169_private *tp,
+ void __iomem *ioaddr)
+{
+ __rtl8169_check_link_status(dev, tp, ioaddr, false);
+}
+
#define WAKE_ANY (WAKE_PHY | WAKE_MAGIC | WAKE_UCAST | WAKE_BCAST | WAKE_MCAST)
static u32 __rtl8169_get_wol(struct rtl8169_private *tp)
}
if (status & LinkChg)
- rtl8169_check_link_status(dev, tp, ioaddr);
+ __rtl8169_check_link_status(dev, tp, ioaddr, true);
/* We need to see the lastest version of tp->intr_mask to
* avoid ignoring an MSI interrupt and having to wait for
struct net_device *dev = pci_get_drvdata(pdev);
struct rtl8169_private *tp = netdev_priv(dev);
- if (!tp->TxDescArray)
- return 0;
-
- rtl8169_check_link_status(dev, tp, tp->mmio_addr);
- return -EBUSY;
+ return tp->TxDescArray ? -EBUSY : 0;
}
static const struct dev_pm_ops rtl8169_pm_ops = {
static void efx_remove_channels(struct efx_nic *efx);
static void efx_remove_port(struct efx_nic *efx);
+static void efx_init_napi(struct efx_nic *efx);
static void efx_fini_napi(struct efx_nic *efx);
+static void efx_fini_napi_channel(struct efx_channel *channel);
static void efx_fini_struct(struct efx_nic *efx);
static void efx_start_all(struct efx_nic *efx);
static void efx_stop_all(struct efx_nic *efx);
/* Disable interrupts and wait for ISRs to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
if (channel->irq)
synchronize_irq(channel->irq);
efx_channel_processed(channel);
napi_enable(&channel->napi_str);
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
}
*channel = *old_channel;
+ channel->napi_dev = NULL;
memset(&channel->eventq, 0, sizeof(channel->eventq));
rx_queue = &channel->rx_queue;
if (rc)
goto rollback;
+ efx_init_napi(efx);
+
/* Destroy old channels */
- for (i = 0; i < efx->n_channels; i++)
+ for (i = 0; i < efx->n_channels; i++) {
+ efx_fini_napi_channel(other_channel[i]);
efx_remove_channel(other_channel[i]);
+ }
out:
/* Free unused channel structures */
for (i = 0; i < efx->n_channels; i++)
efx_start_channel(channel);
}
+ if (efx->legacy_irq)
+ efx->legacy_irq_enabled = true;
efx_nic_enable_interrupts(efx);
/* Switch to event based MCDI completions after enabling interrupts.
/* Disable interrupts and wait for ISR to complete */
efx_nic_disable_interrupts(efx);
- if (efx->legacy_irq)
+ if (efx->legacy_irq) {
synchronize_irq(efx->legacy_irq);
+ efx->legacy_irq_enabled = false;
+ }
efx_for_each_channel(channel, efx) {
if (channel->irq)
synchronize_irq(channel->irq);
*
**************************************************************************/
-static int efx_init_napi(struct efx_nic *efx)
+static void efx_init_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
netif_napi_add(channel->napi_dev, &channel->napi_str,
efx_poll, napi_weight);
}
- return 0;
+}
+
+static void efx_fini_napi_channel(struct efx_channel *channel)
+{
+ if (channel->napi_dev)
+ netif_napi_del(&channel->napi_str);
+ channel->napi_dev = NULL;
}
static void efx_fini_napi(struct efx_nic *efx)
{
struct efx_channel *channel;
- efx_for_each_channel(channel, efx) {
- if (channel->napi_dev)
- netif_napi_del(&channel->napi_str);
- channel->napi_dev = NULL;
- }
+ efx_for_each_channel(channel, efx)
+ efx_fini_napi_channel(channel);
}
/**************************************************************************
if (rc)
goto fail1;
- rc = efx_init_napi(efx);
- if (rc)
- goto fail2;
+ efx_init_napi(efx);
rc = efx->type->init(efx);
if (rc) {
efx->type->fini(efx);
fail3:
efx_fini_napi(efx);
- fail2:
efx_remove_all(efx);
fail1:
return rc;
* @pci_dev: The PCI device
* @type: Controller type attributes
* @legacy_irq: IRQ number
+ * @legacy_irq_enabled: Are IRQs enabled on NIC (INT_EN_KER register)?
* @workqueue: Workqueue for port reconfigures and the HW monitor.
* Work items do not hold and must not acquire RTNL.
* @workqueue_name: Name of workqueue
struct pci_dev *pci_dev;
const struct efx_nic_type *type;
int legacy_irq;
+ bool legacy_irq_enabled;
struct workqueue_struct *workqueue;
char workqueue_name[16];
struct work_struct reset_work;
u32 queues;
int syserr;
+ /* Could this be ours? If interrupts are disabled then the
+ * channel state may not be valid.
+ */
+ if (!efx->legacy_irq_enabled)
+ return result;
+
/* Read the ISR which also ACKs the interrupts */
efx_readd(efx, ®, FR_BZ_INT_ISR0);
queues = EFX_EXTRACT_DWORD(reg, 0, 31);
pr_warning("\tno valid MAC address;"
"please, use ifconfig or nwhwconfig!\n");
+ spin_lock_init(&priv->lock);
+
ret = register_netdev(dev);
if (ret) {
pr_err("%s: ERROR %i registering the device\n",
dev->name, (dev->features & NETIF_F_SG) ? "on" : "off",
(dev->features & NETIF_F_HW_CSUM) ? "on" : "off");
- spin_lock_init(&priv->lock);
-
return ret;
}
DMFE_DBUG(0, "dmfe_start_xmit", 0);
- /* Resource flag check */
- netif_stop_queue(dev);
-
/* Too large packet check */
if (skb->len > MAX_PACKET_SIZE) {
pr_err("big packet = %d\n", (u16)skb->len);
return NETDEV_TX_OK;
}
+ /* Resource flag check */
+ netif_stop_queue(dev);
+
spin_lock_irqsave(&db->lock, flags);
/* No Tx resource check, it never happen nromally */
#define UCC_GETH_UTFS_INIT 512 /* Tx virtual FIFO size
*/
#define UCC_GETH_UTFET_INIT 256 /* 1/2 utfs */
-#define UCC_GETH_UTFTT_INIT 512
+#define UCC_GETH_UTFTT_INIT 256 /* 1/2 utfs
+ due to errata */
/* Gigabit Ethernet (1000 Mbps) */
#define UCC_GETH_URFS_GIGA_INIT 4096/*2048*/ /* Rx virtual
FIFO size */
/* Packet is complete. Inject into stack. */
/* We have IP packet here */
odev->skb_rx_buf->protocol = cpu_to_be16(ETH_P_IP);
- /* don't check it */
- odev->skb_rx_buf->ip_summed =
- CHECKSUM_UNNECESSARY;
-
skb_reset_mac_header(odev->skb_rx_buf);
/* Ship it off to the kernel */
case HSO_INTF_BULK:
/* It's a regular bulk interface */
- if (((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) &&
- !disable_net)
- hso_dev = hso_create_net_device(interface, port_spec);
- else
+ if ((port_spec & HSO_PORT_MASK) == HSO_PORT_NETWORK) {
+ if (!disable_net)
+ hso_dev =
+ hso_create_net_device(interface, port_spec);
+ } else {
hso_dev =
hso_create_bulk_serial_device(interface, port_spec);
+ }
if (!hso_dev)
goto exit;
break;
struct net_device *dev = port->netdev;
card_t* card = port->card;
u8 stat;
+ unsigned count = 0;
spin_lock(&port->lock);
dev->stats.tx_bytes += readw(&desc->len);
}
writeb(0, &desc->stat); /* Free descriptor */
+ count++;
port->txlast = (port->txlast + 1) % card->tx_ring_buffers;
}
- netif_wake_queue(dev);
+ if (count)
+ netif_wake_queue(dev);
spin_unlock(&port->lock);
}
static int x25_asy_close(struct net_device *dev)
{
struct x25_asy *sl = netdev_priv(dev);
- int err;
spin_lock(&sl->lock);
if (sl->tty)
netif_stop_queue(dev);
sl->rcount = 0;
sl->xleft = 0;
- err = lapb_unregister(dev);
- if (err != LAPB_OK)
- printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
- err);
spin_unlock(&sl->lock);
return 0;
}
if (err)
return err;
/* Done. We have linked the TTY line to a channel. */
- return sl->dev->base_addr;
+ return 0;
}
static void x25_asy_close_tty(struct tty_struct *tty)
{
struct x25_asy *sl = tty->disc_data;
+ int err;
/* First make sure we're connected. */
if (!sl || sl->magic != X25_ASY_MAGIC)
dev_close(sl->dev);
rtnl_unlock();
+ err = lapb_unregister(sl->dev);
+ if (err != LAPB_OK)
+ printk(KERN_ERR "x25_asy_close: lapb_unregister error -%d\n",
+ err);
+
tty->disc_data = NULL;
sl->tty = NULL;
x25_asy_free(sl);
sc->bmisscount = 0;
}
- if (sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) {
+ if ((sc->opmode == NL80211_IFTYPE_AP && sc->num_ap_vifs > 1) ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT) {
u64 tsf = ath5k_hw_get_tsf64(ah);
u32 tsftu = TSF_TO_TU(tsf);
int slot = ((tsftu % sc->bintval) * ATH_BCBUF) / sc->bintval;
/* NB: hw still stops DMA, so proceed */
}
- /* refresh the beacon for AP mode */
- if (sc->opmode == NL80211_IFTYPE_AP)
+ /* refresh the beacon for AP or MESH mode */
+ if (sc->opmode == NL80211_IFTYPE_AP ||
+ sc->opmode == NL80211_IFTYPE_MESH_POINT)
ath5k_beacon_update(sc->hw, vif);
ath5k_hw_set_txdp(ah, sc->bhalq, bf->daddr);
/* Assign the vap/adhoc to a beacon xmit slot. */
if ((avf->opmode == NL80211_IFTYPE_AP) ||
- (avf->opmode == NL80211_IFTYPE_ADHOC)) {
+ (avf->opmode == NL80211_IFTYPE_ADHOC) ||
+ (avf->opmode == NL80211_IFTYPE_MESH_POINT)) {
int slot;
WARN_ON(list_empty(&sc->bcbuf));
sc->bslot[avf->bslot] = vif;
if (avf->opmode == NL80211_IFTYPE_AP)
sc->num_ap_vifs++;
- else
+ else if (avf->opmode == NL80211_IFTYPE_ADHOC)
sc->num_adhoc_vifs++;
}
#define SUB_NUM_CTL_MODES_AT_5G_40 2 /* excluding HT40, EXT-OFDM */
#define SUB_NUM_CTL_MODES_AT_2G_40 3 /* excluding HT40, EXT-OFDM, EXT-CCK */
+#define CTL(_tpower, _flag) ((_tpower) | ((_flag) << 6))
+
static const struct ar9300_eeprom ar9300_default = {
.eepromVersion = 2,
.templateVersion = 2,
}
},
.ctlPowerData_2G = {
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 1}, {60, 0}, {60, 0}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 1) } },
- { { {60, 1}, {60, 0}, {0, 0}, {0, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 1), CTL(60, 0), CTL(0, 0), CTL(0, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
- { { {60, 0}, {60, 1}, {60, 0}, {60, 0} } },
- { { {60, 0}, {60, 1}, {60, 1}, {60, 1} } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 0) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
+ { { CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 1) } },
},
.modalHeader5G = {
/* 4 idle,t1,t2,b (4 bits per setting) */
.ctlPowerData_5G = {
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 0}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 0), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 0}, {60, 1}, {60, 1}, {60, 0},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 0), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
- {60, 0}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
+ CTL(60, 0), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 0}, {60, 0}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 0), CTL(60, 0), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 1},
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 1),
}
},
{
{
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
- {60, 1}, {60, 1}, {60, 1}, {60, 0},
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 1), CTL(60, 0),
}
},
{
{
- {60, 1}, {60, 0}, {60, 1}, {60, 1},
- {60, 1}, {60, 1}, {60, 0}, {60, 1},
+ CTL(60, 1), CTL(60, 0), CTL(60, 1), CTL(60, 1),
+ CTL(60, 1), CTL(60, 1), CTL(60, 0), CTL(60, 1),
}
},
}
struct cal_ctl_data_5g *ctl_5g = eep->ctlPowerData_5G;
if (is2GHz)
- return ctl_2g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge]);
else
- return ctl_5g[idx].ctlEdges[edge].tPower;
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge]);
}
static u16 ar9003_hw_get_indirect_edge_power(struct ar9300_eeprom *eep,
if (is2GHz) {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 1) < freq &&
- ctl_2g[idx].ctlEdges[edge - 1].flag)
- return ctl_2g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_2g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_2g[idx].ctlEdges[edge - 1]);
} else {
if (ath9k_hw_fbin2freq(ctl_freqbin[edge - 1], 0) < freq &&
- ctl_5g[idx].ctlEdges[edge - 1].flag)
- return ctl_5g[idx].ctlEdges[edge - 1].tPower;
+ CTL_EDGE_FLAGS(ctl_5g[idx].ctlEdges[edge - 1]))
+ return CTL_EDGE_TPOWER(ctl_5g[idx].ctlEdges[edge - 1]);
}
return AR9300_MAX_RATE_POWER;
u8 tPow2x[14];
} __packed;
-struct cal_ctl_edge_pwr {
- u8 tPower:6,
- flag:2;
-} __packed;
-
struct cal_ctl_data_2g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_2G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_2G];
} __packed;
struct cal_ctl_data_5g {
- struct cal_ctl_edge_pwr ctlEdges[AR9300_NUM_BAND_EDGES_5G];
+ u8 ctlEdges[AR9300_NUM_BAND_EDGES_5G];
} __packed;
struct ar9300_eeprom {
#include <linux/device.h>
#include <linux/leds.h>
#include <linux/completion.h>
+#include <linux/pm_qos_params.h>
#include "debug.h"
#include "common.h"
struct ath_txq *ath_txq_setup(struct ath_softc *sc, int qtype, int subtype);
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq);
int ath_tx_setup(struct ath_softc *sc, int haltype);
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx);
void ath_draintxq(struct ath_softc *sc,
struct ath_txq *txq, bool retry_tx);
void ath_tx_node_init(struct ath_softc *sc, struct ath_node *an);
struct ath_descdma txsdma;
struct ath_ant_comb ant_comb;
+
+ struct pm_qos_request_list pm_qos_req;
};
struct ath_wiphy {
}
extern struct ieee80211_ops ath9k_ops;
-extern struct pm_qos_request_list ath9k_pm_qos_req;
extern int modparam_nohwcrypt;
extern int led_blink;
for (i = 0; (i < num_band_edges) &&
(pRdEdgesPower[i].bChannel != AR5416_BCHAN_UNUSED); i++) {
if (freq == ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel, is2GHz)) {
- twiceMaxEdgePower = pRdEdgesPower[i].tPower;
+ twiceMaxEdgePower = CTL_EDGE_TPOWER(pRdEdgesPower[i].ctl);
break;
} else if ((i > 0) &&
(freq < ath9k_hw_fbin2freq(pRdEdgesPower[i].bChannel,
is2GHz))) {
if (ath9k_hw_fbin2freq(pRdEdgesPower[i - 1].bChannel,
is2GHz) < freq &&
- pRdEdgesPower[i - 1].flag) {
+ CTL_EDGE_FLAGS(pRdEdgesPower[i - 1].ctl)) {
twiceMaxEdgePower =
- pRdEdgesPower[i - 1].tPower;
+ CTL_EDGE_TPOWER(pRdEdgesPower[i - 1].ctl);
}
break;
}
#define AR9287_CHECKSUM_LOCATION (AR9287_EEP_START_LOC + 1)
+#define CTL_EDGE_TPOWER(_ctl) ((_ctl) & 0x3f)
+#define CTL_EDGE_FLAGS(_ctl) (((_ctl) >> 6) & 0x03)
+
+#define LNA_CTL_BUF_MODE BIT(0)
+#define LNA_CTL_ISEL_LO BIT(1)
+#define LNA_CTL_ISEL_HI BIT(2)
+#define LNA_CTL_BUF_IN BIT(3)
+#define LNA_CTL_FEM_BAND BIT(4)
+#define LNA_CTL_LOCAL_BIAS BIT(5)
+#define LNA_CTL_FORCE_XPA BIT(6)
+#define LNA_CTL_USE_ANT1 BIT(7)
+
enum eeprom_param {
EEP_NFTHRESH_5,
EEP_NFTHRESH_2,
u8 xatten2Margin[AR5416_MAX_CHAINS];
u8 ob_ch1;
u8 db_ch1;
- u8 useAnt1:1,
- force_xpaon:1,
- local_bias:1,
- femBandSelectUsed:1, xlnabufin:1, xlnaisel:2, xlnabufmode:1;
+ u8 lna_ctl;
u8 miscBits;
u16 xpaBiasLvlFreq[3];
u8 futureModal[6];
u8 tPow2x[8];
} __packed;
-
-#ifdef __BIG_ENDIAN_BITFIELD
-struct cal_ctl_edges {
- u8 bChannel;
- u8 flag:2, tPower:6;
-} __packed;
-#else
struct cal_ctl_edges {
u8 bChannel;
- u8 tPower:6, flag:2;
+ u8 ctl;
} __packed;
-#endif
struct cal_data_op_loop_ar9287 {
u8 pwrPdg[2][5];
ath9k_hw_analog_shift_rmw(ah, AR_AN_TOP2,
AR_AN_TOP2_LOCALBIAS,
AR_AN_TOP2_LOCALBIAS_S,
- pModal->local_bias);
+ !!(pModal->lna_ctl &
+ LNA_CTL_LOCAL_BIAS));
REG_RMW_FIELD(ah, AR_PHY_XPA_CFG, AR_PHY_FORCE_XPA_CFG,
- pModal->force_xpaon);
+ !!(pModal->lna_ctl & LNA_CTL_FORCE_XPA));
}
REG_RMW_FIELD(ah, AR_PHY_SETTLING, AR_PHY_SETTLING_SWITCH,
case 1:
break;
case 2:
- scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_TWO_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_TWO_CHAIN;
+ else
+ scaledPower = 0;
break;
case 3:
- scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ if (scaledPower > REDUCE_SCALED_POWER_BY_THREE_CHAIN)
+ scaledPower -= REDUCE_SCALED_POWER_BY_THREE_CHAIN;
+ else
+ scaledPower = 0;
break;
}
- scaledPower = max((u16)0, scaledPower);
-
if (IS_CHAN_2GHZ(chan)) {
numCtlModes = ARRAY_SIZE(ctlModesFor11g) -
SUB_NUM_CTL_MODES_AT_2G_40;
num_ant_config = 1;
- if (pBase->version >= 0x0E0D)
- if (pModal->useAnt1)
- num_ant_config += 1;
+ if (pBase->version >= 0x0E0D &&
+ (pModal->lna_ctl & LNA_CTL_USE_ANT1))
+ num_ant_config += 1;
return num_ant_config;
}
struct hif_device_usb *hif_dev =
(struct hif_device_usb *) usb_get_intfdata(interface);
+ /*
+ * The device has to be set to FULLSLEEP mode in case no
+ * interface is up.
+ */
+ if (!(hif_dev->flags & HIF_USB_START))
+ ath9k_htc_suspend(hif_dev->htc_handle);
+
ath9k_hif_usb_dealloc_urbs(hif_dev);
return 0;
void ath9k_htc_ps_wakeup(struct ath9k_htc_priv *priv);
void ath9k_htc_ps_restore(struct ath9k_htc_priv *priv);
void ath9k_ps_work(struct work_struct *work);
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode);
void ath9k_start_rfkill_poll(struct ath9k_htc_priv *priv);
void ath9k_init_leds(struct ath9k_htc_priv *priv);
u16 devid, char *product);
void ath9k_htc_disconnect_device(struct htc_target *htc_handle, bool hotunplug);
#ifdef CONFIG_PM
+void ath9k_htc_suspend(struct htc_target *htc_handle);
int ath9k_htc_resume(struct htc_target *htc_handle);
#endif
#ifdef CONFIG_ATH9K_HTC_DEBUGFS
}
#ifdef CONFIG_PM
+
+void ath9k_htc_suspend(struct htc_target *htc_handle)
+{
+ ath9k_htc_setpower(htc_handle->drv_priv, ATH9K_PM_FULL_SLEEP);
+}
+
int ath9k_htc_resume(struct htc_target *htc_handle)
{
int ret;
return mode;
}
-static bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
- enum ath9k_power_mode mode)
+bool ath9k_htc_setpower(struct ath9k_htc_priv *priv,
+ enum ath9k_power_mode mode)
{
bool ret;
val = REG_READ(ah, AR7010_GPIO_IN);
return (MS(val, AR7010_GPIO_IN_VAL) & AR_GPIO_BIT(gpio)) == 0;
} else if (AR_SREV_9300_20_OR_LATER(ah))
- return MS_REG_READ(AR9300, gpio) != 0;
+ return (MS(REG_READ(ah, AR_GPIO_IN), AR9300_GPIO_IN_VAL) &
+ AR_GPIO_BIT(gpio)) != 0;
else if (AR_SREV_9271(ah))
return MS_REG_READ(AR9271, gpio) != 0;
else if (AR_SREV_9287_11_OR_LATER(ah))
*/
#include <linux/slab.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
.write = ath9k_iowrite32,
};
-struct pm_qos_request_list ath9k_pm_qos_req;
-
/**************************/
/* Initialization */
/**************************/
hw->flags |= IEEE80211_HW_MFP_CAPABLE;
hw->wiphy->interface_modes =
+ BIT(NL80211_IFTYPE_P2P_GO) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT) |
BIT(NL80211_IFTYPE_AP) |
BIT(NL80211_IFTYPE_WDS) |
BIT(NL80211_IFTYPE_STATION) |
ath_init_leds(sc);
ath_start_rfkill_poll(sc);
- pm_qos_add_request(&ath9k_pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
+ pm_qos_add_request(&sc->pm_qos_req, PM_QOS_CPU_DMA_LATENCY,
PM_QOS_DEFAULT_VALUE);
return 0;
}
ieee80211_unregister_hw(hw);
- pm_qos_remove_request(&ath9k_pm_qos_req);
+ pm_qos_remove_request(&sc->pm_qos_req);
ath_rx_cleanup(sc);
ath_tx_cleanup(sc);
ath9k_deinit_softc(sc);
rs->rs_phyerr = phyerr;
} else if (ads.ds_rxstatus8 & AR_DecryptCRCErr)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
- else if ((ads.ds_rxstatus8 & AR_MichaelErr) &&
- rs->rs_keyix != ATH9K_RXKEYIX_INVALID)
+ else if (ads.ds_rxstatus8 & AR_MichaelErr)
rs->rs_status |= ATH9K_RXERR_MIC;
else if (ads.ds_rxstatus8 & AR_KeyMiss)
rs->rs_status |= ATH9K_RXERR_DECRYPT;
*/
#include <linux/nl80211.h>
-#include <linux/pm_qos_params.h>
#include "ath9k.h"
#include "btcoex.h"
* the relevant bits of the h/w.
*/
ath9k_hw_set_interrupts(ah, 0);
- ath_drain_all_txq(sc, false);
+ stopped = ath_drain_all_txq(sc, false);
spin_lock_bh(&sc->rx.pcu_lock);
- stopped = ath_stoprecv(sc);
+ if (!ath_stoprecv(sc))
+ stopped = false;
/* XXX: do not flush receive queue here. We don't want
* to flush data frames already in queue because of
ath9k_btcoex_timer_resume(sc);
}
- pm_qos_update_request(&ath9k_pm_qos_req, 55);
+ pm_qos_update_request(&sc->pm_qos_req, 55);
mutex_unlock:
mutex_unlock(&sc->mutex);
sc->sc_flags |= SC_OP_INVALID;
- pm_qos_update_request(&ath9k_pm_qos_req, PM_QOS_DEFAULT_VALUE);
+ pm_qos_update_request(&sc->pm_qos_req, PM_QOS_DEFAULT_VALUE);
mutex_unlock(&sc->mutex);
struct ath_softc *sc = aphy->sc;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
struct ath_vif *avp = (void *)vif->drv_priv;
- int i;
ath_print(common, ATH_DBG_CONFIG, "Detach Interface\n");
if ((sc->sc_ah->opmode == NL80211_IFTYPE_AP) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_ADHOC) ||
(sc->sc_ah->opmode == NL80211_IFTYPE_MESH_POINT)) {
+ /* Disable SWBA interrupt */
+ sc->sc_ah->imask &= ~ATH9K_INT_SWBA;
ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
ath9k_ps_restore(sc);
+ tasklet_kill(&sc->bcon_tasklet);
}
ath_beacon_return(sc, avp);
sc->sc_flags &= ~SC_OP_BEACONS;
- for (i = 0; i < ARRAY_SIZE(sc->beacon.bslot); i++) {
- if (sc->beacon.bslot[i] == vif) {
- printk(KERN_DEBUG "%s: vif had allocated beacon "
- "slot\n", __func__);
- sc->beacon.bslot[i] = NULL;
- sc->beacon.bslot_aphy[i] = NULL;
- }
+ if (sc->nbcnvifs) {
+ /* Re-enable SWBA interrupt */
+ sc->sc_ah->imask |= ATH9K_INT_SWBA;
+ ath9k_ps_wakeup(sc);
+ ath9k_hw_set_interrupts(sc->sc_ah, sc->sc_ah->imask);
+ ath9k_ps_restore(sc);
}
sc->nvifs--;
bool stopped;
spin_lock_bh(&sc->rx.rxbuflock);
- ath9k_hw_stoppcurecv(ah);
+ ath9k_hw_abortpcurecv(ah);
ath9k_hw_setrxfilter(ah, 0);
stopped = ath9k_hw_stopdmarecv(ah);
struct ath_rx_status *rx_stats,
bool *decrypt_error)
{
+#define is_mc_or_valid_tkip_keyix ((is_mc || \
+ (rx_stats->rs_keyix != ATH9K_RXKEYIX_INVALID && \
+ test_bit(rx_stats->rs_keyix, common->tkip_keymap))))
+
struct ath_hw *ah = common->ah;
__le16 fc;
u8 rx_status_len = ah->caps.rx_status_len;
if (rx_stats->rs_status & ATH9K_RXERR_DECRYPT) {
*decrypt_error = true;
} else if (rx_stats->rs_status & ATH9K_RXERR_MIC) {
+ bool is_mc;
/*
* The MIC error bit is only valid if the frame
* is not a control frame or fragment, and it was
* decrypted using a valid TKIP key.
*/
+ is_mc = !!is_multicast_ether_addr(hdr->addr1);
+
if (!ieee80211_is_ctl(fc) &&
!ieee80211_has_morefrags(fc) &&
!(le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_FRAG) &&
- test_bit(rx_stats->rs_keyix, common->tkip_keymap))
+ is_mc_or_valid_tkip_keyix)
rxs->flag |= RX_FLAG_MMIC_ERROR;
else
rx_stats->rs_status &= ~ATH9K_RXERR_MIC;
#define AR9287_GPIO_IN_VAL_S 11
#define AR9271_GPIO_IN_VAL 0xFFFF0000
#define AR9271_GPIO_IN_VAL_S 16
-#define AR9300_GPIO_IN_VAL 0x0001FFFF
-#define AR9300_GPIO_IN_VAL_S 0
#define AR7010_GPIO_IN_VAL 0x0000FFFF
#define AR7010_GPIO_IN_VAL_S 0
+#define AR_GPIO_IN 0x404c
+#define AR9300_GPIO_IN_VAL 0x0001FFFF
+#define AR9300_GPIO_IN_VAL_S 0
+
#define AR_GPIO_OE_OUT (AR_SREV_9300_20_OR_LATER(ah) ? 0x4050 : 0x404c)
#define AR_GPIO_OE_OUT_DRV 0x3
#define AR_GPIO_OE_OUT_DRV_NO 0x0
}
}
-void ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
+bool ath_drain_all_txq(struct ath_softc *sc, bool retry_tx)
{
struct ath_hw *ah = sc->sc_ah;
struct ath_common *common = ath9k_hw_common(sc->sc_ah);
int i, npend = 0;
if (sc->sc_flags & SC_OP_INVALID)
- return;
+ return true;
/* Stop beacon queue */
ath9k_hw_stoptxdma(sc->sc_ah, sc->beacon.beaconq);
}
}
- if (npend) {
- int r;
-
- ath_print(common, ATH_DBG_FATAL,
- "Failed to stop TX DMA. Resetting hardware!\n");
-
- spin_lock_bh(&sc->sc_resetlock);
- r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
- if (r)
- ath_print(common, ATH_DBG_FATAL,
- "Unable to reset hardware; reset status %d\n",
- r);
- spin_unlock_bh(&sc->sc_resetlock);
- }
+ if (npend)
+ ath_print(common, ATH_DBG_FATAL, "Failed to stop TX DMA!\n");
for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
if (ATH_TXQ_SETUP(sc, i))
ath_draintxq(sc, &sc->tx.txq[i], retry_tx);
}
+
+ return !npend;
}
void ath_tx_cleanupq(struct ath_softc *sc, struct ath_txq *txq)
if (SUPP(CARL9170FW_WLANTX_CAB)) {
ar->hw->wiphy->interface_modes |=
- BIT(NL80211_IFTYPE_AP);
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_P2P_GO);
}
}
}
unlock:
- if (err && (vif_id != -1)) {
+ if (err && (vif_id >= 0)) {
vif_priv->active = false;
bitmap_release_region(&ar->vif_bitmap, vif_id, 0);
ar->vifs--;
* supports these modes. The code which will add the
* additional interface_modes is in fw.c.
*/
- hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
+ hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_P2P_CLIENT);
hw->flags |= IEEE80211_HW_RX_INCLUDES_FCS |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
mac_tmp = cpu_to_le16(AR9170_TX_MAC_HW_DURATION |
AR9170_TX_MAC_BACKOFF);
- mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &&
+ mac_tmp |= cpu_to_le16((hw_queue << AR9170_TX_MAC_QOS_S) &
AR9170_TX_MAC_QOS);
no_ack = !!(info->flags & IEEE80211_TX_CTL_NO_ACK);
err_free_ssb:
kfree(sdio);
err_disable_func:
+ sdio_claim_host(func);
sdio_disable_func(func);
err_release_host:
sdio_release_host(func);
lbs_deb_sdio("call remove card\n");
lbs_stop_card(card->priv);
lbs_remove_card(card->priv);
- card->priv->surpriseremoved = 1;
flush_workqueue(card->workqueue);
destroy_workqueue(card->workqueue);
lbs_stop_card(priv);
lbs_remove_card(priv); /* will call free_netdev */
- priv->surpriseremoved = 1;
free_irq(spi->irq, card);
if_spi_terminate_spi_thread(card);
if (card->pdata->teardown)
lbs_free_adapter(priv);
lbs_cfg_free(priv);
-
- priv->dev = NULL;
free_netdev(dev);
lbs_deb_leave(LBS_DEB_MAIN);
orinoco_add_hostscan_results(priv, buf, len);
kfree(buf);
- } else if (priv->scan_request) {
+ } else {
/* Either abort or complete the scan */
- cfg80211_scan_done(priv->scan_request, (len < 0));
- priv->scan_request = NULL;
+ orinoco_scan_done(priv, (len < 0));
}
spin_lock_irqsave(&priv->scan_lock, flags);
hermes_write_regn(hw, EVACK, 0xffff);
}
+ orinoco_scan_done(priv, true);
+
/* firmware will have to reassociate */
netif_carrier_off(dev);
priv->last_linkstatus = 0xffff;
orinoco_unlock(priv, &flags);
/* Scanning support: Notify scan cancellation */
- if (priv->scan_request) {
- cfg80211_scan_done(priv->scan_request, 1);
- priv->scan_request = NULL;
- }
+ orinoco_scan_done(priv, true);
if (priv->hard_reset) {
err = (*priv->hard_reset)(priv);
struct net_device *dev = priv->ndev;
int err = 0;
+ /* If we've called commit, we are reconfiguring or bringing the
+ * interface up. Maintaining countermeasures across this would
+ * be confusing, so note that we've disabled them. The port will
+ * be enabled later in orinoco_commit or __orinoco_up. */
+ priv->tkip_cm_active = 0;
+
err = orinoco_hw_program_rids(priv);
/* FIXME: what about netif_tx_lock */
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
priv->scan_request = NULL;
}
}
+
+void orinoco_scan_done(struct orinoco_private *priv, bool abort)
+{
+ if (priv->scan_request) {
+ cfg80211_scan_done(priv->scan_request, abort);
+ priv->scan_request = NULL;
+ }
+}
void orinoco_add_hostscan_results(struct orinoco_private *dev,
unsigned char *buf,
size_t len);
+void orinoco_scan_done(struct orinoco_private *priv, bool abort);
#endif /* _ORINOCO_SCAN_H_ */
goto failed;
}
- ret = pcmcia_request_irq(link, orinoco_interrupt);
- if (ret)
- goto failed;
-
- /* We initialize the hermes structure before completing PCMCIA
- * configuration just in case the interrupt handler gets
- * called. */
mem = ioport_map(link->resource[0]->start,
resource_size(link->resource[0]));
if (!mem)
goto failed;
+ /* We initialize the hermes structure before completing PCMCIA
+ * configuration just in case the interrupt handler gets
+ * called. */
hermes_struct_init(hw, mem, HERMES_16BIT_REGSPACING);
hw->eeprom_pda = true;
+ ret = pcmcia_request_irq(link, orinoco_interrupt);
+ if (ret)
+ goto failed;
+
ret = pcmcia_enable_device(link);
if (ret)
goto failed;
*/
if (param->value) {
priv->tkip_cm_active = 1;
- ret = hermes_enable_port(hw, 0);
+ ret = hermes_disable_port(hw, 0);
} else {
priv->tkip_cm_active = 0;
- ret = hermes_disable_port(hw, 0);
+ ret = hermes_enable_port(hw, 0);
}
break;
#define GRANT_INVALID_REF 0
-#define NET_TX_RING_SIZE __RING_SIZE((struct xen_netif_tx_sring *)0, PAGE_SIZE)
-#define NET_RX_RING_SIZE __RING_SIZE((struct xen_netif_rx_sring *)0, PAGE_SIZE)
+#define NET_TX_RING_SIZE __CONST_RING_SIZE(xen_netif_tx, PAGE_SIZE)
+#define NET_RX_RING_SIZE __CONST_RING_SIZE(xen_netif_rx, PAGE_SIZE)
#define TX_MAX_TARGET min_t(int, NET_RX_RING_SIZE, 256)
struct netfront_info {
.name = "GSC-PCI",
.unmask = dino_unmask_irq,
.mask = dino_mask_irq,
- .ack = no_ack_irq,
};
.name = "EISA",
.unmask = eisa_unmask_irq,
.mask = eisa_mask_irq,
- .ack = no_ack_irq,
};
static irqreturn_t eisa_irq(int wax_irq, void *intr_dev)
setup_irq(2, &irq2_action);
for (i = 0; i < 16; i++) {
set_irq_chip_and_handler(i, &eisa_interrupt_type,
- handle_level_irq);
+ handle_simple_irq);
}
EISA_bus = 1;
.name = "GSC-ASIC",
.unmask = gsc_asic_unmask_irq,
.mask = gsc_asic_mask_irq,
- .ack = no_ack_irq,
};
int gsc_assign_irq(struct irq_chip *type, void *data)
if (irq > GSC_IRQ_MAX)
return NO_IRQ;
- set_irq_chip_and_handler(irq, type, handle_level_irq);
+ set_irq_chip_and_handler(irq, type, handle_simple_irq);
set_irq_chip_data(irq, data);
return irq++;
DBG(KERN_DEBUG "enable_irq(%d): eoi(%p, 0x%x)\n", irq,
vi->eoi_addr, vi->eoi_data);
iosapic_eoi(vi->eoi_addr, vi->eoi_data);
+}
+
+static void iosapic_eoi_irq(unsigned int irq)
+{
+ struct vector_info *vi = get_irq_chip_data(irq);
+
+ iosapic_eoi(vi->eoi_addr, vi->eoi_data);
cpu_eoi_irq(irq);
}
.unmask = iosapic_unmask_irq,
.mask = iosapic_mask_irq,
.ack = cpu_ack_irq,
+ .eoi = iosapic_eoi_irq,
#ifdef CONFIG_SMP
.set_affinity = iosapic_set_affinity_irq,
#endif
static unsigned int led_lanrxtx __read_mostly = 1;
static char lcd_text[32] __read_mostly;
static char lcd_text_default[32] __read_mostly;
+static int lcd_no_led_support __read_mostly = 0; /* KittyHawk doesn't support LED on its LCD */
static struct workqueue_struct *led_wq;
.lcd_width = 16,
.lcd_cmd_reg_addr = KITTYHAWK_LCD_CMD,
.lcd_data_reg_addr = KITTYHAWK_LCD_DATA,
- .min_cmd_delay = 40,
+ .min_cmd_delay = 80,
.reset_cmd1 = 0x80,
.reset_cmd2 = 0xc0,
};
/* Display the default text now */
if (led_type == LED_HASLCD) lcd_print( lcd_text_default );
+ /* KittyHawk has no LED support on its LCD */
+ if (lcd_no_led_support) return 0;
+
/* Create the work queue and queue the LED task */
led_wq = create_singlethread_workqueue("led_wq");
queue_delayed_work(led_wq, &led_task, 0);
proc_pdc_root = proc_mkdir("pdc", 0);
if (!proc_pdc_root) return -1;
- ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
- &led_proc_fops, (void *)LED_NOLCD); /* LED */
- if (!ent) return -1;
+
+ if (!lcd_no_led_support)
+ {
+ ent = proc_create_data("led", S_IRUGO|S_IWUSR, proc_pdc_root,
+ &led_proc_fops, (void *)LED_NOLCD); /* LED */
+ if (!ent) return -1;
+ }
if (led_type == LED_HASLCD)
{
case 0x58B: /* KittyHawk DC2 100 (K200) */
printk(KERN_INFO "%s: KittyHawk-Machine (hversion 0x%x) found, "
"LED detection skipped.\n", __FILE__, CPU_HVERSION);
+ lcd_no_led_support = 1;
goto found; /* use the preinitialized values of lcd_info */
}
.name = SUPERIO,
.unmask = superio_unmask_irq,
.mask = superio_mask_irq,
- .ack = no_ack_irq,
};
#ifdef DEBUG_SUPERIO_INIT
#endif
for (i = 0; i < 16; i++) {
- set_irq_chip_and_handler(i, &superio_interrupt_type, handle_level_irq);
+ set_irq_chip_and_handler(i, &superio_interrupt_type, handle_simple_irq);
}
/*
}
}
-static bool pci_bus_resource_better(struct resource *res1, bool pos1,
- struct resource *res2, bool pos2)
-{
- /* If exactly one is positive decode, always prefer that one */
- if (pos1 != pos2)
- return pos1 ? true : false;
-
- /* Prefer the one that contains the highest address */
- if (res1->end != res2->end)
- return (res1->end > res2->end) ? true : false;
-
- /* Otherwise, prefer the one with highest "center of gravity" */
- if (res1->start != res2->start)
- return (res1->start > res2->start) ? true : false;
-
- /* Otherwise, choose one arbitrarily (but consistently) */
- return (res1 > res2) ? true : false;
-}
-
-static bool pci_bus_resource_positive(struct pci_bus *bus, struct resource *res)
-{
- struct pci_bus_resource *bus_res;
-
- /*
- * This relies on the fact that pci_bus.resource[] refers to P2P or
- * CardBus bridge base/limit registers, which are always positively
- * decoded. The pci_bus.resources list contains host bridge or
- * subtractively decoded resources.
- */
- list_for_each_entry(bus_res, &bus->resources, list) {
- if (bus_res->res == res)
- return (bus_res->flags & PCI_SUBTRACTIVE_DECODE) ?
- false : true;
- }
- return true;
-}
-
-/*
- * Find the next-best bus resource after the cursor "res". If the cursor is
- * NULL, return the best resource. "Best" means that we prefer positive
- * decode regions over subtractive decode, then those at higher addresses.
- */
-static struct resource *pci_bus_find_resource_prev(struct pci_bus *bus,
- unsigned int type,
- struct resource *res)
-{
- bool res_pos, r_pos, prev_pos = false;
- struct resource *r, *prev = NULL;
- int i;
-
- res_pos = pci_bus_resource_positive(bus, res);
- pci_bus_for_each_resource(bus, r, i) {
- if (!r)
- continue;
-
- if ((r->flags & IORESOURCE_TYPE_BITS) != type)
- continue;
-
- r_pos = pci_bus_resource_positive(bus, r);
- if (!res || pci_bus_resource_better(res, res_pos, r, r_pos)) {
- if (!prev || pci_bus_resource_better(r, r_pos,
- prev, prev_pos)) {
- prev = r;
- prev_pos = r_pos;
- }
- }
- }
-
- return prev;
-}
-
/**
* pci_bus_alloc_resource - allocate a resource from a parent bus
* @bus: PCI bus
resource_size_t),
void *alignf_data)
{
- int ret = -ENOMEM;
+ int i, ret = -ENOMEM;
struct resource *r;
resource_size_t max = -1;
- unsigned int type = res->flags & IORESOURCE_TYPE_BITS;
type_mask |= IORESOURCE_IO | IORESOURCE_MEM;
if (!(res->flags & IORESOURCE_MEM_64))
max = PCIBIOS_MAX_MEM_32;
- /* Look for space at highest addresses first */
- r = pci_bus_find_resource_prev(bus, type, NULL);
- for ( ; r; r = pci_bus_find_resource_prev(bus, type, r)) {
+ pci_bus_for_each_resource(bus, r, i) {
+ if (!r)
+ continue;
+
/* type_mask must match */
if ((res->flags ^ r->flags) & type_mask)
continue;
(unsigned long long)drhd->reg_base_addr, ret);
return -1;
}
+
+ /*
+ * Clear any previous faults.
+ */
+ dmar_fault(iommu->irq, iommu);
}
return 0;
{
u32 cfg;
+ if (!pci_find_capability(dev, PCI_CAP_ID_HT))
+ return;
+
pci_read_config_dword(dev, 0x74, &cfg);
if (cfg & ((1 << 2) | (1 << 15))) {
DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832);
#endif /*CONFIG_MMC_RICOH_MMC*/
+#if defined(CONFIG_DMAR) || defined(CONFIG_INTR_REMAP)
+#define VTUNCERRMSK_REG 0x1ac
+#define VTD_MSK_SPEC_ERRORS (1 << 31)
+/*
+ * This is a quirk for masking vt-d spec defined errors to platform error
+ * handling logic. With out this, platforms using Intel 7500, 5500 chipsets
+ * (and the derivative chipsets like X58 etc) seem to generate NMI/SMI (based
+ * on the RAS config settings of the platform) when a vt-d fault happens.
+ * The resulting SMI caused the system to hang.
+ *
+ * VT-d spec related errors are already handled by the VT-d OS code, so no
+ * need to report the same error through other channels.
+ */
+static void vtd_mask_spec_errors(struct pci_dev *dev)
+{
+ u32 word;
+
+ pci_read_config_dword(dev, VTUNCERRMSK_REG, &word);
+ pci_write_config_dword(dev, VTUNCERRMSK_REG, word | VTD_MSK_SPEC_ERRORS);
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x342e, vtd_mask_spec_errors);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x3c28, vtd_mask_spec_errors);
+#endif
static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f,
struct pci_fixup *end)
va_end(args);
}
}
+EXPORT_SYMBOL(soc_pcmcia_debug);
#endif
static int wlan_status = 1;
static int bluetooth_status = 1;
+static int wimax_status = -1;
+static int wwan_status = -1;
module_param(wlan_status, int, 0444);
MODULE_PARM_DESC(wlan_status, "Set the wireless status on boot "
"(0 = disabled, 1 = enabled, -1 = don't do anything). "
"default is 1");
+module_param(wimax_status, int, 0444);
+MODULE_PARM_DESC(wimax_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
+module_param(wwan_status, int, 0444);
+MODULE_PARM_DESC(wwan_status, "Set the wireless status on boot "
+ "(0 = disabled, 1 = enabled, -1 = don't do anything). "
+ "default is 1");
+
/*
* Some events we use, same for all Asus
*/
*/
#define WL_RSTS 0x01 /* internal Wifi */
#define BT_RSTS 0x02 /* internal Bluetooth */
+#define WM_RSTS 0x08 /* internal wimax */
+#define WW_RSTS 0x20 /* internal wwan */
/* LED */
#define METHOD_MLED "MLED"
*/
#define METHOD_WLAN "WLED"
#define METHOD_BLUETOOTH "BLED"
+
+/* WWAN and WIMAX */
+#define METHOD_WWAN "GSMC"
+#define METHOD_WIMAX "WMXC"
+
#define METHOD_WL_STATUS "RSTS"
/* Brightness */
return sysfs_acpi_set(asus, buf, count, METHOD_BLUETOOTH);
}
+/*
+ * Wimax
+ */
+static int asus_wimax_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WIMAX, !!status)) {
+ pr_warning("Error setting wimax status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wimax(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WM_RSTS));
+}
+
+static ssize_t store_wimax(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WIMAX);
+}
+
+/*
+ * Wwan
+ */
+static int asus_wwan_set(struct asus_laptop *asus, int status)
+{
+ if (write_acpi_int(asus->handle, METHOD_WWAN, !!status)) {
+ pr_warning("Error setting wwan status to %d", status);
+ return -EIO;
+ }
+ return 0;
+}
+
+static ssize_t show_wwan(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sprintf(buf, "%d\n", asus_wireless_status(asus, WW_RSTS));
+}
+
+static ssize_t store_wwan(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct asus_laptop *asus = dev_get_drvdata(dev);
+
+ return sysfs_acpi_set(asus, buf, count, METHOD_WWAN);
+}
+
/*
* Display
*/
static DEVICE_ATTR(wlan, S_IRUGO | S_IWUSR, show_wlan, store_wlan);
static DEVICE_ATTR(bluetooth, S_IRUGO | S_IWUSR,
show_bluetooth, store_bluetooth);
+static DEVICE_ATTR(wimax, S_IRUGO | S_IWUSR, show_wimax, store_wimax);
+static DEVICE_ATTR(wwan, S_IRUGO | S_IWUSR, show_wwan, store_wwan);
static DEVICE_ATTR(display, S_IRUGO | S_IWUSR, show_disp, store_disp);
static DEVICE_ATTR(ledd, S_IRUGO | S_IWUSR, show_ledd, store_ledd);
static DEVICE_ATTR(ls_level, S_IRUGO | S_IWUSR, show_lslvl, store_lslvl);
&dev_attr_infos.attr,
&dev_attr_wlan.attr,
&dev_attr_bluetooth.attr,
+ &dev_attr_wimax.attr,
+ &dev_attr_wwan.attr,
&dev_attr_display.attr,
&dev_attr_ledd.attr,
&dev_attr_ls_level.attr,
} else if (attr == &dev_attr_display.attr) {
supported = !acpi_check_handle(handle, METHOD_SWITCH_DISPLAY, NULL);
+ } else if (attr == &dev_attr_wimax.attr) {
+ supported =
+ !acpi_check_handle(asus->handle, METHOD_WIMAX, NULL);
+
+ } else if (attr == &dev_attr_wwan.attr) {
+ supported = !acpi_check_handle(asus->handle, METHOD_WWAN, NULL);
+
} else if (attr == &dev_attr_ledd.attr) {
supported = !acpi_check_handle(handle, METHOD_LEDD, NULL);
/*
* The HWRS method return informations about the hardware.
- * 0x80 bit is for WLAN, 0x100 for Bluetooth.
+ * 0x80 bit is for WLAN, 0x100 for Bluetooth,
+ * 0x40 for WWAN, 0x10 for WIMAX.
* The significance of others is yet to be found.
*/
status =
if (wlan_status >= 0)
asus_wlan_set(asus, !!wlan_status);
+ if (wimax_status >= 0)
+ asus_wimax_set(asus, !!wimax_status);
+
+ if (wwan_status >= 0)
+ asus_wwan_set(asus, !!wwan_status);
+
/* Keyboard Backlight is on by default */
if (!acpi_check_handle(asus->handle, METHOD_KBD_LIGHT_SET, NULL))
asus_kled_set(asus, 1);
kfree(obj);
}
-static int store_cpufv(struct device *dev, struct device_attribute *attr,
- const char *buf, size_t count)
+static ssize_t store_cpufv(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
int value;
struct acpi_buffer input = { (acpi_size)sizeof(value), &value };
bios_return = *((struct bios_return *)obj->buffer.pointer);
memcpy(buffer, &bios_return.value, sizeof(bios_return.value));
+
+ kfree(obj);
return 0;
}
#include <linux/io.h>
#include <linux/sysdev.h>
#include <linux/dmi.h>
+#include <linux/efi.h>
#include <linux/mutex.h>
#include <asm/bios_ebda.h>
sysdev_class_unregister(&class_rtl);
}
-static int dmi_check_cb(const struct dmi_system_id *id)
-{
- RTL_DEBUG("found IBM server '%s'\n", id->ident);
- return 0;
-}
-
-#define ibm_dmi_entry(NAME, TYPE) \
-{ \
- .ident = NAME, \
- .matches = { \
- DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
- DMI_MATCH(DMI_PRODUCT_NAME, TYPE), \
- }, \
- .callback = dmi_check_cb \
-}
static struct dmi_system_id __initdata ibm_rtl_dmi_table[] = {
- ibm_dmi_entry("BladeCenter LS21", "7971"),
- ibm_dmi_entry("BladeCenter LS22", "7901"),
- ibm_dmi_entry("BladeCenter HS21 XM", "7995"),
- ibm_dmi_entry("BladeCenter HS22", "7870"),
- ibm_dmi_entry("BladeCenter HS22V", "7871"),
- ibm_dmi_entry("System x3550 M2", "7946"),
- ibm_dmi_entry("System x3650 M2", "7947"),
- ibm_dmi_entry("System x3550 M3", "7944"),
- ibm_dmi_entry("System x3650 M3", "7945"),
+ { \
+ .matches = { \
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"), \
+ }, \
+ },
{ }
};
if (force)
pr_warning("ibm-rtl: module loaded by force\n");
/* first ensure that we are running on IBM HW */
- else if (!dmi_check_system(ibm_rtl_dmi_table))
+ else if (efi_enabled || !dmi_check_system(ibm_rtl_dmi_table))
return -ENODEV;
/* Get the address for the Extended BIOS Data Area */
RTL_DEBUG("rtl_cmd_width = %u, rtl_cmd_type = %u\n",
rtl_cmd_width, rtl_cmd_type);
addr = ioread32(&rtl_table->cmd_port_address);
- RTL_DEBUG("addr = %#llx\n", addr);
+ RTL_DEBUG("addr = %#llx\n", (unsigned long long)addr);
plen = rtl_cmd_width/sizeof(char);
rtl_cmd_addr = rtl_port_map(addr, plen);
RTL_DEBUG("rtl_cmd_addr = %#llx\n", (u64)rtl_cmd_addr);
#define dprintk(msg...) pr_debug(DRV_PFX msg)
-#define KEYCODE_BASE 0xD0
-#define MSI_WMI_BRIGHTNESSUP KEYCODE_BASE
-#define MSI_WMI_BRIGHTNESSDOWN (KEYCODE_BASE + 1)
-#define MSI_WMI_VOLUMEUP (KEYCODE_BASE + 2)
-#define MSI_WMI_VOLUMEDOWN (KEYCODE_BASE + 3)
+#define SCANCODE_BASE 0xD0
+#define MSI_WMI_BRIGHTNESSUP SCANCODE_BASE
+#define MSI_WMI_BRIGHTNESSDOWN (SCANCODE_BASE + 1)
+#define MSI_WMI_VOLUMEUP (SCANCODE_BASE + 2)
+#define MSI_WMI_VOLUMEDOWN (SCANCODE_BASE + 3)
+#define MSI_WMI_MUTE (SCANCODE_BASE + 4)
static struct key_entry msi_wmi_keymap[] = {
{ KE_KEY, MSI_WMI_BRIGHTNESSUP, {KEY_BRIGHTNESSUP} },
{ KE_KEY, MSI_WMI_BRIGHTNESSDOWN, {KEY_BRIGHTNESSDOWN} },
{ KE_KEY, MSI_WMI_VOLUMEUP, {KEY_VOLUMEUP} },
{ KE_KEY, MSI_WMI_VOLUMEDOWN, {KEY_VOLUMEDOWN} },
+ { KE_KEY, MSI_WMI_MUTE, {KEY_MUTE} },
{ KE_END, 0}
};
static ktime_t last_pressed[ARRAY_SIZE(msi_wmi_keymap) - 1];
ktime_t diff;
cur = ktime_get_real();
diff = ktime_sub(cur, last_pressed[key->code -
- KEYCODE_BASE]);
+ SCANCODE_BASE]);
/* Ignore event if the same event happened in a 50 ms
timeframe -> Key press may result in 10-20 GPEs */
if (ktime_to_us(diff) < 1000 * 50) {
key->code, ktime_to_us(diff));
return;
}
- last_pressed[key->code - KEYCODE_BASE] = cur;
+ last_pressed[key->code - SCANCODE_BASE] = cur;
if (key->type == KE_KEY &&
/* Brightness is served via acpi video driver */
ibm->acpi->type,
dispatch_acpi_notify);
ibm->flags.acpi_notify_installed = 0;
- ibm->flags.acpi_notify_installed = 0;
}
if (ibm->flags.proc_created) {
{ KE_KEY, 0x141, { KEY_BRIGHTNESSUP } },
{ KE_KEY, 0x142, { KEY_WLAN } },
{ KE_KEY, 0x143, { KEY_PROG1 } },
+ { KE_KEY, 0x17f, { KEY_FN } },
{ KE_KEY, 0xb05, { KEY_PROG2 } },
{ KE_KEY, 0xb06, { KEY_WWW } },
{ KE_KEY, 0xb07, { KEY_MAIL } },
struct wmi_block *wblock;
list_for_each_entry(wblock, &wmi_block_list, list)
- if (strncmp(wblock->gblock.guid, guid_string, 16) == 0)
+ if (memcmp(wblock->gblock.guid, guid_string, 16) == 0)
return true;
return false;
};
EXPORT_SYMBOL(pnpacpi_protocol);
-static char *pnpacpi_get_id(struct acpi_device *device)
+static char *__init pnpacpi_get_id(struct acpi_device *device)
{
struct acpi_hardware_id *id;
}
/**
- * set_consumer_device_supply: Bind a regulator to a symbolic supply
+ * set_consumer_device_supply - Bind a regulator to a symbolic supply
* @rdev: regulator source
* @consumer_dev: device the supply applies to
* @consumer_dev_name: dev_name() string for device supply applies to
printk(KERN_WARNING
"%s: could not add device link %s err %d\n",
__func__, dev->kobj.name, err);
- device_remove_file(dev, ®ulator->dev_attr);
goto link_name_err;
}
}
{
int ret, delay;
- /* do we need to enable the supply regulator first */
- if (rdev->supply) {
- ret = _regulator_enable(rdev->supply);
- if (ret < 0) {
- printk(KERN_ERR "%s: failed to enable %s: %d\n",
- __func__, rdev_get_name(rdev), ret);
- return ret;
+ if (rdev->use_count == 0) {
+ /* do we need to enable the supply regulator first */
+ if (rdev->supply) {
+ mutex_lock(&rdev->supply->mutex);
+ ret = _regulator_enable(rdev->supply);
+ mutex_unlock(&rdev->supply->mutex);
+ if (ret < 0) {
+ printk(KERN_ERR "%s: failed to enable %s: %d\n",
+ __func__, rdev_get_name(rdev), ret);
+ return ret;
+ }
}
}
if (ret < 0)
return ret;
- if (delay >= 1000)
+ if (delay >= 1000) {
mdelay(delay / 1000);
- else if (delay)
+ udelay(delay % 1000);
+ } else if (delay) {
udelay(delay);
+ }
} else if (ret < 0) {
printk(KERN_ERR "%s: is_enabled() failed for %s: %d\n",
struct regulator_dev **supply_rdev_ptr)
{
int ret = 0;
+ *supply_rdev_ptr = NULL;
if (WARN(rdev->use_count <= 0,
"unbalanced disables for %s\n",
if (init_data->supply_regulator && init_data->supply_regulator_dev) {
dev_err(dev,
"Supply regulator specified by both name and dev\n");
+ ret = -EINVAL;
goto scrub;
}
if (!found) {
dev_err(dev, "Failed to find supply %s\n",
init_data->supply_regulator);
+ ret = -ENODEV;
goto scrub;
}
.get_voltage = mc13783_fixed_regulator_get_voltage,
};
-int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
- u32 val)
+static int mc13783_powermisc_rmw(struct mc13783_regulator_priv *priv, u32 mask,
+ u32 val)
{
struct mc13783 *mc13783 = priv->mc13783;
int ret;
};
#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
-{ \
+ ereg0, ebit0, ereg1, ebit1) \
.desc = { \
.name = "REG-" #_id, \
.ops = &tps6586x_regulator_##_ops, \
.enable_bit[0] = (ebit0), \
.enable_reg[1] = TPS6586X_SUPPLY##ereg1, \
.enable_bit[1] = (ebit1), \
- .voltages = tps6586x_##vdata##_voltages, \
-}
+ .voltages = tps6586x_##vdata##_voltages,
+
+#define TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+ .go_reg = TPS6586X_##goreg, \
+ .go_bit = (gobit),
#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
+{ \
TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, 0, 0)
+ ereg0, ebit0, ereg1, ebit1) \
+}
#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
+{ \
TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \
- ereg0, ebit0, ereg1, ebit1, goreg, gobit)
+ ereg0, ebit0, ereg1, ebit1) \
+ TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
+}
static struct tps6586x_regulator tps6586x_regulator[] = {
TPS6586X_LDO(LDO_0, ldo, SUPPLYV1, 5, 3, ENC, 0, END, 0),
TPS6586X_LDO(LDO_5, ldo, SUPPLYV6, 0, 3, ENE, 6, ENE, 6),
TPS6586X_LDO(LDO_6, ldo, SUPPLYV3, 0, 3, ENC, 4, END, 4),
TPS6586X_LDO(LDO_7, ldo, SUPPLYV3, 3, 3, ENC, 5, END, 5),
- TPS6586X_LDO(LDO_8, ldo, SUPPLYV1, 5, 3, ENC, 6, END, 6),
+ TPS6586X_LDO(LDO_8, ldo, SUPPLYV2, 5, 3, ENC, 6, END, 6),
TPS6586X_LDO(LDO_9, ldo, SUPPLYV6, 3, 3, ENE, 7, ENE, 7),
- TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, ENE, 7, ENE, 7),
+ TPS6586X_LDO(LDO_RTC, ldo, SUPPLYV4, 3, 3, V4, 7, V4, 7),
TPS6586X_LDO(LDO_1, dvm, SUPPLYV1, 0, 5, ENC, 1, END, 1),
- TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 1, END, 1),
+ TPS6586X_LDO(SM_2, sm2, SUPPLYV2, 0, 5, ENC, 7, END, 7),
TPS6586X_DVM(LDO_2, dvm, LDO2BV1, 0, 5, ENA, 3, ENB, 3, VCC2, 6),
TPS6586X_DVM(LDO_4, ldo4, LDO4V1, 0, 5, ENC, 3, END, 3, VCC1, 6),
uint8_t val1, val2;
int ret;
+ if (ri->enable_reg[0] == ri->enable_reg[1] &&
+ ri->enable_bit[0] == ri->enable_bit[1])
+ return 0;
+
ret = tps6586x_read(parent, ri->enable_reg[0], &val1);
if (ret)
return ret;
if (ret)
return ret;
- if (!(val2 & ri->enable_bit[1]))
+ if (!(val2 & (1 << ri->enable_bit[1])))
return 0;
/*
* The regulator is on, but it's enabled with the bit we don't
* want to use, so we switch the enable bits
*/
- if (!(val1 & ri->enable_bit[0])) {
+ if (!(val1 & (1 << ri->enable_bit[0]))) {
ret = tps6586x_set_bits(parent, ri->enable_reg[0],
1 << ri->enable_bit[0]);
if (ret)
return -EACCES;
status = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message >> 8, 0x15 /* PB_WORD_MSB */ );
- if (status >= 0)
+ message >> 8, TWL4030_PM_MASTER_PB_WORD_MSB);
+ if (status < 0)
return status;
return twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
- message, 0x16 /* PB_WORD_LSB */ );
+ message & 0xff, TWL4030_PM_MASTER_PB_WORD_LSB);
}
/*----------------------------------------------------------------------*/
init_subchannel_id(&mchk_schid);
mchk_schid.sch_no = crw0->rsid;
if (crw1)
- mchk_schid.ssid = (crw1->rsid >> 8) & 3;
+ mchk_schid.ssid = (crw1->rsid >> 4) & 3;
/*
* Since we are always presented with IPI in the CRW, we have to
if (!(a_status & ZFCP_STATUS_COMMON_RUNNING) ||
a_status & ZFCP_STATUS_COMMON_ERP_FAILED)
return 0;
+ if (p_status & ZFCP_STATUS_COMMON_NOESC)
+ return need;
if (!(a_status & ZFCP_STATUS_COMMON_UNBLOCKED))
need = ZFCP_ERP_ACTION_REOPEN_ADAPTER;
/* fall through */
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE,
&zfcp_sdev->status);
erp_action = &zfcp_sdev->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
+ erp_action->sdev = sdev;
if (!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
zfcp_erp_action_dismiss_port(port);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &port->status);
erp_action = &port->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
+ erp_action->port = port;
if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
break;
zfcp_erp_action_dismiss_adapter(adapter);
atomic_set_mask(ZFCP_STATUS_COMMON_ERP_INUSE, &adapter->status);
erp_action = &adapter->erp_action;
+ memset(erp_action, 0, sizeof(struct zfcp_erp_action));
if (!(atomic_read(&adapter->status) &
ZFCP_STATUS_COMMON_RUNNING))
act_status |= ZFCP_STATUS_ERP_CLOSE_ONLY;
return NULL;
}
- memset(erp_action, 0, sizeof(struct zfcp_erp_action));
erp_action->adapter = adapter;
- erp_action->port = port;
- erp_action->sdev = sdev;
erp_action->action = need;
erp_action->status = act_status;
zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
- req->data = zfcp_sdev;
+ req->data = sdev;
req->handler = zfcp_fsf_abort_fcp_command_handler;
req->qtcb->header.lun_handle = zfcp_sdev->lun_handle;
req->qtcb->header.port_handle = zfcp_sdev->port->handle;
struct fcp_resp_with_ext *fcp_rsp;
unsigned long flags;
- zfcp_fsf_fcp_handler_common(req);
-
read_lock_irqsave(&req->adapter->abort_lock, flags);
scpnt = req->data;
return;
}
+ zfcp_fsf_fcp_handler_common(req);
+
if (unlikely(req->status & ZFCP_STATUS_FSFREQ_ERROR)) {
set_host_byte(scpnt, DID_TRANSPORT_DISRUPTED);
goto skip_fsfstatus;
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
struct zfcp_qdio *qdio = adapter->qdio;
struct fsf_qtcb_bottom_io *io;
+ unsigned long flags;
if (unlikely(!(atomic_read(&zfcp_sdev->status) &
ZFCP_STATUS_COMMON_UNBLOCKED)))
return -EBUSY;
- spin_lock(&qdio->req_q_lock);
+ spin_lock_irqsave(&qdio->req_q_lock, flags);
if (atomic_read(&qdio->req_q_free) <= 0) {
atomic_inc(&qdio->req_q_full);
goto out;
zfcp_fsf_req_free(req);
scsi_cmnd->host_scribble = NULL;
out:
- spin_unlock(&qdio->req_q_lock);
+ spin_unlock_irqrestore(&qdio->req_q_lock, flags);
return retval;
}
scpnt->scsi_done(scpnt);
}
-static int zfcp_scsi_queuecommand_lck(struct scsi_cmnd *scpnt,
- void (*done) (struct scsi_cmnd *))
+static
+int zfcp_scsi_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *scpnt)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(scpnt->device);
struct zfcp_adapter *adapter = zfcp_sdev->port->adapter;
/* reset the status for this request */
scpnt->result = 0;
scpnt->host_scribble = NULL;
- scpnt->scsi_done = done;
scsi_result = fc_remote_port_chkready(rport);
if (unlikely(scsi_result)) {
return ret;
}
-static DEF_SCSI_QCMD(zfcp_scsi_queuecommand)
-
static int zfcp_scsi_slave_alloc(struct scsi_device *sdev)
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3252},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3253},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3254},
-#define PCI_DEVICE_ID_HP_CISSF 0x333f
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSF, 0x103C, 0x333F},
- {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
- {PCI_VENDOR_ID_COMPAQ, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+ {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
{0,}
};
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324a103C, "Smart Array P712m", &SA5_access},
{0x324b103C, "Smart Array P711m", &SA5_access},
- {0x3233103C, "StorageWorks P1210m", &SA5_access},
- {0x333F103C, "StorageWorks P1210m", &SA5_access},
{0x3250103C, "Smart Array", &SA5_access},
{0x3250113C, "Smart Array", &SA5_access},
{0x3250123C, "Smart Array", &SA5_access},
/* create a bio for continuation segment */
bio = bio_map_kern(req_q, or->cdb_cont.buff, or->cdb_cont.total_bytes,
GFP_KERNEL);
- if (unlikely(!bio))
- return -ENOMEM;
+ if (IS_ERR(bio))
+ return PTR_ERR(bio);
bio->bi_rw |= REQ_WRITE;
static unsigned int pmcraid_debug_log;
static unsigned int pmcraid_disable_aen;
static unsigned int pmcraid_log_level = IOASC_LOG_LEVEL_MUST;
+static unsigned int pmcraid_enable_msix;
/*
* Data structures to support multiple adapters by the LLD.
int rc;
struct pci_dev *pdev = pinstance->pdev;
- if (pci_find_capability(pdev, PCI_CAP_ID_MSIX)) {
+ if ((pmcraid_enable_msix) &&
+ (pci_find_capability(pdev, PCI_CAP_ID_MSIX))) {
int num_hrrq = PMCRAID_NUM_MSIX_VECTORS;
struct msix_entry entries[PMCRAID_NUM_MSIX_VECTORS];
int i;
*/
#define PMCRAID_DRIVER_NAME "PMC MaxRAID"
#define PMCRAID_DEVFILE "pmcsas"
-#define PMCRAID_DRIVER_VERSION "2.0.3"
+#define PMCRAID_DRIVER_VERSION "1.0.3"
#define PMCRAID_DRIVER_DATE __DATE__
#define PMCRAID_FW_VERSION_1 0x002
__u8 lun[PMCRAID_LUN_LEN];
} __attribute__((packed, aligned(4)));
-/* extended configuration table sizes are of 64 bytes in size */
-#define PMCRAID_CFGTE_EXT_SIZE 32
+/* extended configuration table sizes are also of 32 bytes in size */
struct pmcraid_config_table_entry_ext {
struct pmcraid_config_table_entry cfgte;
- __u8 cfgte_ext[PMCRAID_CFGTE_EXT_SIZE];
};
/* resource types (config_table_entry.resource_type values) */
uint32_t enable_target_reset :1;
uint32_t enable_lip_full_login :1;
uint32_t enable_led_scheme :1;
- uint32_t inta_enabled :1;
uint32_t msi_enabled :1;
uint32_t msix_enabled :1;
uint32_t disable_serdes :1;
fcp_cmnd->additional_cdb_len |= 2;
int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun);
+ host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun));
memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len);
cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len);
cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32(
skip_msi:
ret = request_irq(ha->pdev->irq, ha->isp_ops->intr_handler,
- IRQF_SHARED, QLA2XXX_DRIVER_NAME, rsp);
+ ha->flags.msi_enabled ? 0 : IRQF_SHARED,
+ QLA2XXX_DRIVER_NAME, rsp);
if (ret) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
ha->pdev->irq);
goto fail;
}
- ha->flags.inta_enabled = 1;
+
clear_risc_ints:
/*
goto queuing_error_fcp_cmnd;
int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
+ host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
/* build FCP_CMND IU */
memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
{
scsi_qla_host_t *vha = shost_priv(cmd->device->host);
srb_t *sp;
- int ret;
+ int ret = SUCCESS;
unsigned int id, lun;
unsigned long flags;
int wait = 0;
ha->init_cb_size = sizeof(struct mid_init_cb_81xx);
ha->gid_list_info_size = 8;
ha->optrom_size = OPTROM_SIZE_82XX;
+ ha->nvram_npiv_size = QLA_MAX_VPORTS_QLA25XX;
ha->isp_ops = &qla82xx_isp_ops;
ha->flash_conf_off = FARX_ACCESS_FLASH_CONF;
ha->flash_data_off = FARX_ACCESS_FLASH_DATA;
/*
* Driver version
*/
-#define QLA2XXX_VERSION "8.03.04-k0"
+#define QLA2XXX_VERSION "8.03.05-k0"
#define QLA_DRIVER_MAJOR_VER 8
#define QLA_DRIVER_MINOR_VER 3
-#define QLA_DRIVER_PATCH_VER 4
+#define QLA_DRIVER_PATCH_VER 5
#define QLA_DRIVER_BETA_VER 0
return rtn;
}
-static int __scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
+static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
{
if (!scmd->device->host->hostt->eh_abort_handler)
return FAILED;
return scmd->device->host->hostt->eh_abort_handler(scmd);
}
-/**
- * scsi_try_to_abort_cmd - Ask host to abort a running command.
- * @scmd: SCSI cmd to abort from Lower Level.
- *
- * Notes:
- * This function will not return until the user's completion function
- * has been called. there is no timeout on this operation. if the
- * author of the low-level driver wishes this operation to be timed,
- * they can provide this facility themselves. helper functions in
- * scsi_error.c can be supplied to make this easier to do.
- */
-static int scsi_try_to_abort_cmd(struct scsi_cmnd *scmd)
-{
- /*
- * scsi_done was called just after the command timed out and before
- * we had a chance to process it. (db)
- */
- if (scmd->serial_number == 0)
- return SUCCESS;
- return __scsi_try_to_abort_cmd(scmd);
-}
-
static void scsi_abort_eh_cmnd(struct scsi_cmnd *scmd)
{
- if (__scsi_try_to_abort_cmd(scmd) != SUCCESS)
+ if (scsi_try_to_abort_cmd(scmd) != SUCCESS)
if (scsi_try_bus_device_reset(scmd) != SUCCESS)
if (scsi_try_target_reset(scmd) != SUCCESS)
if (scsi_try_bus_reset(scmd) != SUCCESS)
INIT_LIST_HEAD(&cmd->eh_entry);
- /*
- * Set the serial numbers back to zero
- */
- cmd->serial_number = 0;
-
atomic_inc(&cmd->device->iodone_cnt);
if (cmd->result)
atomic_inc(&cmd->device->ioerr_cnt);
.device = uart_console_device,
.setup = serial8250_console_setup,
.early_setup = serial8250_console_early_setup,
- .flags = CON_PRINTBUFFER,
+ .flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
static void kgdboc_restore_input(void)
{
- schedule_work(&kgdboc_restore_input_work);
+ if (likely(system_state == SYSTEM_RUNNING))
+ schedule_work(&kgdboc_restore_input_work);
}
static int kgdboc_register_kbd(char **cptr)
unsigned char cval, fcr = 0;
unsigned long flags;
unsigned int baud, quot;
- u32 mul = 0x3600;
- u32 ps = 0x10;
+ u32 ps, mul;
switch (termios->c_cflag & CSIZE) {
case CS5:
baud = uart_get_baud_rate(port, termios, old, 0, 4000000);
quot = 1;
+ ps = 0x10;
+ mul = 0x3600;
switch (baud) {
case 3500000:
mul = 0x3345;
ps = 0xC;
break;
- case 3000000:
- mul = 0x2EE0;
- break;
- case 2500000:
- mul = 0x2710;
- break;
- case 2000000:
- mul = 0x1F40;
- break;
case 1843200:
mul = 0x2400;
break;
+ case 3000000:
+ case 2500000:
+ case 2000000:
case 1500000:
- mul = 0x1770;
- break;
case 1000000:
- mul = 0xFA0;
- break;
case 500000:
- mul = 0x7D0;
+ /* mul/ps/quot = 0x9C4/0x10/0x1 will make a 500000 bps */
+ mul = baud / 500000 * 0x9C4;
break;
default:
/* Use uart_get_divisor to get quot for other baud rates */
xfer->tx_dma = xfer->rx_dma = INVALID_DMA_ADDRESS;
if (xfer->tx_buf) {
+ /* tx_buf is a const void* where we need a void * for the dma
+ * mapping */
+ void *nonconst_tx = (void *)xfer->tx_buf;
+
xfer->tx_dma = dma_map_single(dev,
- (void *) xfer->tx_buf, xfer->len,
+ nonconst_tx, xfer->len,
DMA_TO_DEVICE);
if (dma_mapping_error(dev, xfer->tx_dma))
return -ENOMEM;
{
while (dws->write(dws))
dws->read(dws);
+ /*
+ * There is a possibility that the last word of a transaction
+ * will be lost if data is not ready. Re-read to solve this issue.
+ */
+ dws->read(dws);
transfer_complete(dws);
}
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) },
#define ASUS_OLED_DEVICE_ATTR(_file) dev_attr_asus_oled_##_file
-static DEVICE_ATTR(asus_oled_enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(asus_oled_enabled, S_IWUSR | S_IRUGO,
get_enabled, set_enabled);
-static DEVICE_ATTR(asus_oled_picture, S_IWUGO , NULL, set_picture);
+static DEVICE_ATTR(asus_oled_picture, S_IWUSR , NULL, set_picture);
-static DEVICE_ATTR(enabled, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(enabled, S_IWUSR | S_IRUGO,
class_get_enabled, class_set_enabled);
-static DEVICE_ATTR(picture, S_IWUGO, NULL, class_set_picture);
+static DEVICE_ATTR(picture, S_IWUSR, NULL, class_set_picture);
static int asus_oled_probe(struct usb_interface *interface,
const struct usb_device_id *id)
return;
batman_if->if_status = IF_TO_BE_REMOVED;
-
- /* caller must take if_list_lock */
- list_del_rcu(&batman_if->list);
synchronize_rcu();
sysfs_del_hardif(&batman_if->hardif_obj);
hardif_put(batman_if);
void hardif_remove_interfaces(void)
{
struct batman_if *batman_if, *batman_if_tmp;
+ struct list_head if_queue;
+
+ INIT_LIST_HEAD(&if_queue);
- rtnl_lock();
spin_lock(&if_list_lock);
list_for_each_entry_safe(batman_if, batman_if_tmp, &if_list, list) {
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
+ list_add_tail(&batman_if->list, &if_queue);
}
spin_unlock(&if_list_lock);
+
+ rtnl_lock();
+ list_for_each_entry_safe(batman_if, batman_if_tmp, &if_queue, list) {
+ hardif_remove_interface(batman_if);
+ }
rtnl_unlock();
}
break;
case NETDEV_UNREGISTER:
spin_lock(&if_list_lock);
- hardif_remove_interface(batman_if);
+ list_del_rcu(&batman_if->list);
spin_unlock(&if_list_lock);
+
+ hardif_remove_interface(batman_if);
break;
case NETDEV_CHANGEMTU:
if (batman_if->soft_iface)
struct bat_priv *priv = netdev_priv(soft_iface);
/* check if enough space is available for pulling, and pull */
- if (!pskb_may_pull(skb, hdr_size)) {
- kfree_skb(skb);
- return;
- }
+ if (!pskb_may_pull(skb, hdr_size))
+ goto dropped;
+
skb_pull_rcsum(skb, hdr_size);
/* skb_set_mac_header(skb, -sizeof(struct ethhdr));*/
/* skb->dev & skb->pkt_type are set here */
+ if (unlikely(!pskb_may_pull(skb, ETH_HLEN)))
+ goto dropped;
skb->protocol = eth_type_trans(skb, soft_iface);
/* should not be neccesary anymore as we use skb_pull_rcsum()
soft_iface->last_rx = jiffies;
netif_rx(skb);
+ return;
+
+dropped:
+ kfree_skb(skb);
+ return;
}
#ifdef HAVE_NET_DEVICE_OPS
Contact Info:
=============
-Brett Rudley brudley@broadcom.com
-Henry Ptasinski henryp@broadcom.com
-Dowan Kim dowan@broadcom.com
+Brett Rudley brudley@broadcom.com
+Henry Ptasinski henryp@broadcom.com
+Dowan Kim dowan@broadcom.com
+Roland Vossen rvossen@broadcom.com
+Arend van Spriel arend@broadcom.com
Brett Rudley <brudley@broadcom.com>
Henry Ptasinski <henryp@broadcom.com>
Dowan Kim <dowan@broadcom.com>
+Roland Vossen <rvossen@broadcom.com>
+Arend van Spriel <arend@broadcom.com>
usbduxsub_tmp->inBuffer = NULL;
kfree(usbduxsub_tmp->insnBuffer);
usbduxsub_tmp->insnBuffer = NULL;
- kfree(usbduxsub_tmp->inBuffer);
- usbduxsub_tmp->inBuffer = NULL;
+ kfree(usbduxsub_tmp->outBuffer);
+ usbduxsub_tmp->outBuffer = NULL;
kfree(usbduxsub_tmp->dac_commands);
usbduxsub_tmp->dac_commands = NULL;
kfree(usbduxsub_tmp->dux_commands);
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/slab.h>
+#include <linux/smp_lock.h>
#include <linux/module.h>
#include <linux/kref.h>
#include <linux/usb.h>
t->value = temp; \
return count; \
} \
- static DEVICE_ATTR(value, S_IWUGO | S_IRUGO, show_##value, set_##value);
+ static DEVICE_ATTR(value, S_IWUSR | S_IRUGO, show_##value, set_##value);
show_int(enable);
show_int(offline);
struct go7007 *go = i2c_get_adapdata(adapter);
struct v4l2_device *v4l2_dev = &go->v4l2_dev;
- if (v4l2_i2c_new_subdev(v4l2_dev, adapter, NULL, type, addr, NULL))
+ if (v4l2_i2c_new_subdev(v4l2_dev, adapter, type, addr, NULL))
return 0;
printk(KERN_INFO "go7007: probing for module i2c:%s failed\n", type);
adis16220_write_reset, 0);
#define IIO_DEV_ATTR_CAPTURE(_store) \
- IIO_DEVICE_ATTR(capture, S_IWUGO, NULL, _store, 0)
+ IIO_DEVICE_ATTR(capture, S_IWUSR, NULL, _store, 0)
static IIO_DEV_ATTR_CAPTURE(adis16220_write_capture);
dbufs->output_bytes_produced = total_output;
str_info->status = str_info->prev;
str_info->prev = STREAM_DECODE;
- str_info->decode_ibuf = NULL;
kfree(str_info->decode_ibuf);
+ str_info->decode_ibuf = NULL;
return retval;
}
VARIAX_PARAM_R(float, mix1);
VARIAX_PARAM_R(int, pickup_wiring);
-static DEVICE_ATTR(tweak, S_IWUGO | S_IRUGO, pod_get_tweak, pod_set_tweak);
-static DEVICE_ATTR(wah_position, S_IWUGO | S_IRUGO, pod_get_wah_position,
+static DEVICE_ATTR(tweak, S_IWUSR | S_IRUGO, pod_get_tweak, pod_set_tweak);
+static DEVICE_ATTR(wah_position, S_IWUSR | S_IRUGO, pod_get_wah_position,
pod_set_wah_position);
-static DEVICE_ATTR(compression_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_gain, S_IWUSR | S_IRUGO,
pod_get_compression_gain, pod_set_compression_gain);
-static DEVICE_ATTR(vol_pedal_position, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(vol_pedal_position, S_IWUSR | S_IRUGO,
pod_get_vol_pedal_position, pod_set_vol_pedal_position);
-static DEVICE_ATTR(compression_threshold, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(compression_threshold, S_IWUSR | S_IRUGO,
pod_get_compression_threshold,
pod_set_compression_threshold);
-static DEVICE_ATTR(pan, S_IWUGO | S_IRUGO, pod_get_pan, pod_set_pan);
-static DEVICE_ATTR(amp_model_setup, S_IWUGO | S_IRUGO, pod_get_amp_model_setup,
+static DEVICE_ATTR(pan, S_IWUSR | S_IRUGO, pod_get_pan, pod_set_pan);
+static DEVICE_ATTR(amp_model_setup, S_IWUSR | S_IRUGO, pod_get_amp_model_setup,
pod_set_amp_model_setup);
-static DEVICE_ATTR(amp_model, S_IWUGO | S_IRUGO, pod_get_amp_model,
+static DEVICE_ATTR(amp_model, S_IWUSR | S_IRUGO, pod_get_amp_model,
pod_set_amp_model);
-static DEVICE_ATTR(drive, S_IWUGO | S_IRUGO, pod_get_drive, pod_set_drive);
-static DEVICE_ATTR(bass, S_IWUGO | S_IRUGO, pod_get_bass, pod_set_bass);
-static DEVICE_ATTR(mid, S_IWUGO | S_IRUGO, pod_get_mid, pod_set_mid);
-static DEVICE_ATTR(lowmid, S_IWUGO | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
-static DEVICE_ATTR(treble, S_IWUGO | S_IRUGO, pod_get_treble, pod_set_treble);
-static DEVICE_ATTR(highmid, S_IWUGO | S_IRUGO, pod_get_highmid,
+static DEVICE_ATTR(drive, S_IWUSR | S_IRUGO, pod_get_drive, pod_set_drive);
+static DEVICE_ATTR(bass, S_IWUSR | S_IRUGO, pod_get_bass, pod_set_bass);
+static DEVICE_ATTR(mid, S_IWUSR | S_IRUGO, pod_get_mid, pod_set_mid);
+static DEVICE_ATTR(lowmid, S_IWUSR | S_IRUGO, pod_get_lowmid, pod_set_lowmid);
+static DEVICE_ATTR(treble, S_IWUSR | S_IRUGO, pod_get_treble, pod_set_treble);
+static DEVICE_ATTR(highmid, S_IWUSR | S_IRUGO, pod_get_highmid,
pod_set_highmid);
-static DEVICE_ATTR(chan_vol, S_IWUGO | S_IRUGO, pod_get_chan_vol,
+static DEVICE_ATTR(chan_vol, S_IWUSR | S_IRUGO, pod_get_chan_vol,
pod_set_chan_vol);
-static DEVICE_ATTR(reverb_mix, S_IWUGO | S_IRUGO, pod_get_reverb_mix,
+static DEVICE_ATTR(reverb_mix, S_IWUSR | S_IRUGO, pod_get_reverb_mix,
pod_set_reverb_mix);
-static DEVICE_ATTR(effect_setup, S_IWUGO | S_IRUGO, pod_get_effect_setup,
+static DEVICE_ATTR(effect_setup, S_IWUSR | S_IRUGO, pod_get_effect_setup,
pod_set_effect_setup);
-static DEVICE_ATTR(band_1_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_1_frequency, S_IWUSR | S_IRUGO,
pod_get_band_1_frequency, pod_set_band_1_frequency);
-static DEVICE_ATTR(presence, S_IWUGO | S_IRUGO, pod_get_presence,
+static DEVICE_ATTR(presence, S_IWUSR | S_IRUGO, pod_get_presence,
pod_set_presence);
-static DEVICE_ATTR2(treble__bass, treble, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(treble__bass, treble, S_IWUSR | S_IRUGO,
pod_get_treble__bass, pod_set_treble__bass);
-static DEVICE_ATTR(noise_gate_enable, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(noise_gate_enable, S_IWUSR | S_IRUGO,
pod_get_noise_gate_enable, pod_set_noise_gate_enable);
-static DEVICE_ATTR(gate_threshold, S_IWUGO | S_IRUGO, pod_get_gate_threshold,
+static DEVICE_ATTR(gate_threshold, S_IWUSR | S_IRUGO, pod_get_gate_threshold,
pod_set_gate_threshold);
-static DEVICE_ATTR(gate_decay_time, S_IWUGO | S_IRUGO, pod_get_gate_decay_time,
+static DEVICE_ATTR(gate_decay_time, S_IWUSR | S_IRUGO, pod_get_gate_decay_time,
pod_set_gate_decay_time);
-static DEVICE_ATTR(stomp_enable, S_IWUGO | S_IRUGO, pod_get_stomp_enable,
+static DEVICE_ATTR(stomp_enable, S_IWUSR | S_IRUGO, pod_get_stomp_enable,
pod_set_stomp_enable);
-static DEVICE_ATTR(comp_enable, S_IWUGO | S_IRUGO, pod_get_comp_enable,
+static DEVICE_ATTR(comp_enable, S_IWUSR | S_IRUGO, pod_get_comp_enable,
pod_set_comp_enable);
-static DEVICE_ATTR(stomp_time, S_IWUGO | S_IRUGO, pod_get_stomp_time,
+static DEVICE_ATTR(stomp_time, S_IWUSR | S_IRUGO, pod_get_stomp_time,
pod_set_stomp_time);
-static DEVICE_ATTR(delay_enable, S_IWUGO | S_IRUGO, pod_get_delay_enable,
+static DEVICE_ATTR(delay_enable, S_IWUSR | S_IRUGO, pod_get_delay_enable,
pod_set_delay_enable);
-static DEVICE_ATTR(mod_param_1, S_IWUGO | S_IRUGO, pod_get_mod_param_1,
+static DEVICE_ATTR(mod_param_1, S_IWUSR | S_IRUGO, pod_get_mod_param_1,
pod_set_mod_param_1);
-static DEVICE_ATTR(delay_param_1, S_IWUGO | S_IRUGO, pod_get_delay_param_1,
+static DEVICE_ATTR(delay_param_1, S_IWUSR | S_IRUGO, pod_get_delay_param_1,
pod_set_delay_param_1);
-static DEVICE_ATTR(delay_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_note_value,
pod_set_delay_param_1_note_value);
-static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_frequency__bass, band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency__bass,
pod_set_band_2_frequency__bass);
-static DEVICE_ATTR(delay_param_2, S_IWUGO | S_IRUGO, pod_get_delay_param_2,
+static DEVICE_ATTR(delay_param_2, S_IWUSR | S_IRUGO, pod_get_delay_param_2,
pod_set_delay_param_2);
-static DEVICE_ATTR(delay_volume_mix, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_volume_mix, S_IWUSR | S_IRUGO,
pod_get_delay_volume_mix, pod_set_delay_volume_mix);
-static DEVICE_ATTR(delay_param_3, S_IWUGO | S_IRUGO, pod_get_delay_param_3,
+static DEVICE_ATTR(delay_param_3, S_IWUSR | S_IRUGO, pod_get_delay_param_3,
pod_set_delay_param_3);
-static DEVICE_ATTR(reverb_enable, S_IWUGO | S_IRUGO, pod_get_reverb_enable,
+static DEVICE_ATTR(reverb_enable, S_IWUSR | S_IRUGO, pod_get_reverb_enable,
pod_set_reverb_enable);
-static DEVICE_ATTR(reverb_type, S_IWUGO | S_IRUGO, pod_get_reverb_type,
+static DEVICE_ATTR(reverb_type, S_IWUSR | S_IRUGO, pod_get_reverb_type,
pod_set_reverb_type);
-static DEVICE_ATTR(reverb_decay, S_IWUGO | S_IRUGO, pod_get_reverb_decay,
+static DEVICE_ATTR(reverb_decay, S_IWUSR | S_IRUGO, pod_get_reverb_decay,
pod_set_reverb_decay);
-static DEVICE_ATTR(reverb_tone, S_IWUGO | S_IRUGO, pod_get_reverb_tone,
+static DEVICE_ATTR(reverb_tone, S_IWUSR | S_IRUGO, pod_get_reverb_tone,
pod_set_reverb_tone);
-static DEVICE_ATTR(reverb_pre_delay, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(reverb_pre_delay, S_IWUSR | S_IRUGO,
pod_get_reverb_pre_delay, pod_set_reverb_pre_delay);
-static DEVICE_ATTR(reverb_pre_post, S_IWUGO | S_IRUGO, pod_get_reverb_pre_post,
+static DEVICE_ATTR(reverb_pre_post, S_IWUSR | S_IRUGO, pod_get_reverb_pre_post,
pod_set_reverb_pre_post);
-static DEVICE_ATTR(band_2_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_2_frequency, S_IWUSR | S_IRUGO,
pod_get_band_2_frequency, pod_set_band_2_frequency);
-static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_frequency__bass, band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency__bass,
pod_set_band_3_frequency__bass);
-static DEVICE_ATTR(wah_enable, S_IWUGO | S_IRUGO, pod_get_wah_enable,
+static DEVICE_ATTR(wah_enable, S_IWUSR | S_IRUGO, pod_get_wah_enable,
pod_set_wah_enable);
-static DEVICE_ATTR(modulation_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_lo_cut, S_IWUSR | S_IRUGO,
pod_get_modulation_lo_cut, pod_set_modulation_lo_cut);
-static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_reverb_lo_cut, S_IWUSR | S_IRUGO,
pod_get_delay_reverb_lo_cut, pod_set_delay_reverb_lo_cut);
-static DEVICE_ATTR(volume_pedal_minimum, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(volume_pedal_minimum, S_IWUSR | S_IRUGO,
pod_get_volume_pedal_minimum, pod_set_volume_pedal_minimum);
-static DEVICE_ATTR(eq_pre_post, S_IWUGO | S_IRUGO, pod_get_eq_pre_post,
+static DEVICE_ATTR(eq_pre_post, S_IWUSR | S_IRUGO, pod_get_eq_pre_post,
pod_set_eq_pre_post);
-static DEVICE_ATTR(volume_pre_post, S_IWUGO | S_IRUGO, pod_get_volume_pre_post,
+static DEVICE_ATTR(volume_pre_post, S_IWUSR | S_IRUGO, pod_get_volume_pre_post,
pod_set_volume_pre_post);
-static DEVICE_ATTR(di_model, S_IWUGO | S_IRUGO, pod_get_di_model,
+static DEVICE_ATTR(di_model, S_IWUSR | S_IRUGO, pod_get_di_model,
pod_set_di_model);
-static DEVICE_ATTR(di_delay, S_IWUGO | S_IRUGO, pod_get_di_delay,
+static DEVICE_ATTR(di_delay, S_IWUSR | S_IRUGO, pod_get_di_delay,
pod_set_di_delay);
-static DEVICE_ATTR(mod_enable, S_IWUGO | S_IRUGO, pod_get_mod_enable,
+static DEVICE_ATTR(mod_enable, S_IWUSR | S_IRUGO, pod_get_mod_enable,
pod_set_mod_enable);
-static DEVICE_ATTR(mod_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_note_value,
pod_set_mod_param_1_note_value);
-static DEVICE_ATTR(mod_param_2, S_IWUGO | S_IRUGO, pod_get_mod_param_2,
+static DEVICE_ATTR(mod_param_2, S_IWUSR | S_IRUGO, pod_get_mod_param_2,
pod_set_mod_param_2);
-static DEVICE_ATTR(mod_param_3, S_IWUGO | S_IRUGO, pod_get_mod_param_3,
+static DEVICE_ATTR(mod_param_3, S_IWUSR | S_IRUGO, pod_get_mod_param_3,
pod_set_mod_param_3);
-static DEVICE_ATTR(mod_param_4, S_IWUGO | S_IRUGO, pod_get_mod_param_4,
+static DEVICE_ATTR(mod_param_4, S_IWUSR | S_IRUGO, pod_get_mod_param_4,
pod_set_mod_param_4);
-static DEVICE_ATTR(mod_param_5, S_IWUGO | S_IRUGO, pod_get_mod_param_5,
+static DEVICE_ATTR(mod_param_5, S_IWUSR | S_IRUGO, pod_get_mod_param_5,
pod_set_mod_param_5);
-static DEVICE_ATTR(mod_volume_mix, S_IWUGO | S_IRUGO, pod_get_mod_volume_mix,
+static DEVICE_ATTR(mod_volume_mix, S_IWUSR | S_IRUGO, pod_get_mod_volume_mix,
pod_set_mod_volume_mix);
-static DEVICE_ATTR(mod_pre_post, S_IWUGO | S_IRUGO, pod_get_mod_pre_post,
+static DEVICE_ATTR(mod_pre_post, S_IWUSR | S_IRUGO, pod_get_mod_pre_post,
pod_set_mod_pre_post);
-static DEVICE_ATTR(modulation_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(modulation_model, S_IWUSR | S_IRUGO,
pod_get_modulation_model, pod_set_modulation_model);
-static DEVICE_ATTR(band_3_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_3_frequency, S_IWUSR | S_IRUGO,
pod_get_band_3_frequency, pod_set_band_3_frequency);
-static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_frequency__bass, band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency__bass,
pod_set_band_4_frequency__bass);
-static DEVICE_ATTR(mod_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(mod_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_mod_param_1_double_precision,
pod_set_mod_param_1_double_precision);
-static DEVICE_ATTR(delay_param_1_double_precision, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_param_1_double_precision, S_IWUSR | S_IRUGO,
pod_get_delay_param_1_double_precision,
pod_set_delay_param_1_double_precision);
-static DEVICE_ATTR(eq_enable, S_IWUGO | S_IRUGO, pod_get_eq_enable,
+static DEVICE_ATTR(eq_enable, S_IWUSR | S_IRUGO, pod_get_eq_enable,
pod_set_eq_enable);
-static DEVICE_ATTR(tap, S_IWUGO | S_IRUGO, pod_get_tap, pod_set_tap);
-static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tap, S_IWUSR | S_IRUGO, pod_get_tap, pod_set_tap);
+static DEVICE_ATTR(volume_tweak_pedal_assign, S_IWUSR | S_IRUGO,
pod_get_volume_tweak_pedal_assign,
pod_set_volume_tweak_pedal_assign);
-static DEVICE_ATTR(band_5_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_5_frequency, S_IWUSR | S_IRUGO,
pod_get_band_5_frequency, pod_set_band_5_frequency);
-static DEVICE_ATTR(tuner, S_IWUGO | S_IRUGO, pod_get_tuner, pod_set_tuner);
-static DEVICE_ATTR(mic_selection, S_IWUGO | S_IRUGO, pod_get_mic_selection,
+static DEVICE_ATTR(tuner, S_IWUSR | S_IRUGO, pod_get_tuner, pod_set_tuner);
+static DEVICE_ATTR(mic_selection, S_IWUSR | S_IRUGO, pod_get_mic_selection,
pod_set_mic_selection);
-static DEVICE_ATTR(cabinet_model, S_IWUGO | S_IRUGO, pod_get_cabinet_model,
+static DEVICE_ATTR(cabinet_model, S_IWUSR | S_IRUGO, pod_get_cabinet_model,
pod_set_cabinet_model);
-static DEVICE_ATTR(stomp_model, S_IWUGO | S_IRUGO, pod_get_stomp_model,
+static DEVICE_ATTR(stomp_model, S_IWUSR | S_IRUGO, pod_get_stomp_model,
pod_set_stomp_model);
-static DEVICE_ATTR(roomlevel, S_IWUGO | S_IRUGO, pod_get_roomlevel,
+static DEVICE_ATTR(roomlevel, S_IWUSR | S_IRUGO, pod_get_roomlevel,
pod_set_roomlevel);
-static DEVICE_ATTR(band_4_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_4_frequency, S_IWUSR | S_IRUGO,
pod_get_band_4_frequency, pod_set_band_4_frequency);
-static DEVICE_ATTR(band_6_frequency, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(band_6_frequency, S_IWUSR | S_IRUGO,
pod_get_band_6_frequency, pod_set_band_6_frequency);
-static DEVICE_ATTR(stomp_param_1_note_value, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(stomp_param_1_note_value, S_IWUSR | S_IRUGO,
pod_get_stomp_param_1_note_value,
pod_set_stomp_param_1_note_value);
-static DEVICE_ATTR(stomp_param_2, S_IWUGO | S_IRUGO, pod_get_stomp_param_2,
+static DEVICE_ATTR(stomp_param_2, S_IWUSR | S_IRUGO, pod_get_stomp_param_2,
pod_set_stomp_param_2);
-static DEVICE_ATTR(stomp_param_3, S_IWUGO | S_IRUGO, pod_get_stomp_param_3,
+static DEVICE_ATTR(stomp_param_3, S_IWUSR | S_IRUGO, pod_get_stomp_param_3,
pod_set_stomp_param_3);
-static DEVICE_ATTR(stomp_param_4, S_IWUGO | S_IRUGO, pod_get_stomp_param_4,
+static DEVICE_ATTR(stomp_param_4, S_IWUSR | S_IRUGO, pod_get_stomp_param_4,
pod_set_stomp_param_4);
-static DEVICE_ATTR(stomp_param_5, S_IWUGO | S_IRUGO, pod_get_stomp_param_5,
+static DEVICE_ATTR(stomp_param_5, S_IWUSR | S_IRUGO, pod_get_stomp_param_5,
pod_set_stomp_param_5);
-static DEVICE_ATTR(stomp_param_6, S_IWUGO | S_IRUGO, pod_get_stomp_param_6,
+static DEVICE_ATTR(stomp_param_6, S_IWUSR | S_IRUGO, pod_get_stomp_param_6,
pod_set_stomp_param_6);
-static DEVICE_ATTR(amp_switch_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(amp_switch_select, S_IWUSR | S_IRUGO,
pod_get_amp_switch_select, pod_set_amp_switch_select);
-static DEVICE_ATTR(delay_param_4, S_IWUGO | S_IRUGO, pod_get_delay_param_4,
+static DEVICE_ATTR(delay_param_4, S_IWUSR | S_IRUGO, pod_get_delay_param_4,
pod_set_delay_param_4);
-static DEVICE_ATTR(delay_param_5, S_IWUGO | S_IRUGO, pod_get_delay_param_5,
+static DEVICE_ATTR(delay_param_5, S_IWUSR | S_IRUGO, pod_get_delay_param_5,
pod_set_delay_param_5);
-static DEVICE_ATTR(delay_pre_post, S_IWUGO | S_IRUGO, pod_get_delay_pre_post,
+static DEVICE_ATTR(delay_pre_post, S_IWUSR | S_IRUGO, pod_get_delay_pre_post,
pod_set_delay_pre_post);
-static DEVICE_ATTR(delay_model, S_IWUGO | S_IRUGO, pod_get_delay_model,
+static DEVICE_ATTR(delay_model, S_IWUSR | S_IRUGO, pod_get_delay_model,
pod_set_delay_model);
-static DEVICE_ATTR(delay_verb_model, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(delay_verb_model, S_IWUSR | S_IRUGO,
pod_get_delay_verb_model, pod_set_delay_verb_model);
-static DEVICE_ATTR(tempo_msb, S_IWUGO | S_IRUGO, pod_get_tempo_msb,
+static DEVICE_ATTR(tempo_msb, S_IWUSR | S_IRUGO, pod_get_tempo_msb,
pod_set_tempo_msb);
-static DEVICE_ATTR(tempo_lsb, S_IWUGO | S_IRUGO, pod_get_tempo_lsb,
+static DEVICE_ATTR(tempo_lsb, S_IWUSR | S_IRUGO, pod_get_tempo_lsb,
pod_set_tempo_lsb);
-static DEVICE_ATTR(wah_model, S_IWUGO | S_IRUGO, pod_get_wah_model,
+static DEVICE_ATTR(wah_model, S_IWUSR | S_IRUGO, pod_get_wah_model,
pod_set_wah_model);
-static DEVICE_ATTR(bypass_volume, S_IWUGO | S_IRUGO, pod_get_bypass_volume,
+static DEVICE_ATTR(bypass_volume, S_IWUSR | S_IRUGO, pod_get_bypass_volume,
pod_set_bypass_volume);
-static DEVICE_ATTR(fx_loop_on_off, S_IWUGO | S_IRUGO, pod_get_fx_loop_on_off,
+static DEVICE_ATTR(fx_loop_on_off, S_IWUSR | S_IRUGO, pod_get_fx_loop_on_off,
pod_set_fx_loop_on_off);
-static DEVICE_ATTR(tweak_param_select, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(tweak_param_select, S_IWUSR | S_IRUGO,
pod_get_tweak_param_select, pod_set_tweak_param_select);
-static DEVICE_ATTR(amp1_engage, S_IWUGO | S_IRUGO, pod_get_amp1_engage,
+static DEVICE_ATTR(amp1_engage, S_IWUSR | S_IRUGO, pod_get_amp1_engage,
pod_set_amp1_engage);
-static DEVICE_ATTR(band_1_gain, S_IWUGO | S_IRUGO, pod_get_band_1_gain,
+static DEVICE_ATTR(band_1_gain, S_IWUSR | S_IRUGO, pod_get_band_1_gain,
pod_set_band_1_gain);
-static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_2_gain__bass, band_2_gain, S_IWUSR | S_IRUGO,
pod_get_band_2_gain__bass, pod_set_band_2_gain__bass);
-static DEVICE_ATTR(band_2_gain, S_IWUGO | S_IRUGO, pod_get_band_2_gain,
+static DEVICE_ATTR(band_2_gain, S_IWUSR | S_IRUGO, pod_get_band_2_gain,
pod_set_band_2_gain);
-static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_3_gain__bass, band_3_gain, S_IWUSR | S_IRUGO,
pod_get_band_3_gain__bass, pod_set_band_3_gain__bass);
-static DEVICE_ATTR(band_3_gain, S_IWUGO | S_IRUGO, pod_get_band_3_gain,
+static DEVICE_ATTR(band_3_gain, S_IWUSR | S_IRUGO, pod_get_band_3_gain,
pod_set_band_3_gain);
-static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_4_gain__bass, band_4_gain, S_IWUSR | S_IRUGO,
pod_get_band_4_gain__bass, pod_set_band_4_gain__bass);
-static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_5_gain__bass, band_5_gain, S_IWUSR | S_IRUGO,
pod_get_band_5_gain__bass, pod_set_band_5_gain__bass);
-static DEVICE_ATTR(band_4_gain, S_IWUGO | S_IRUGO, pod_get_band_4_gain,
+static DEVICE_ATTR(band_4_gain, S_IWUSR | S_IRUGO, pod_get_band_4_gain,
pod_set_band_4_gain);
-static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR2(band_6_gain__bass, band_6_gain, S_IWUSR | S_IRUGO,
pod_get_band_6_gain__bass, pod_set_band_6_gain__bass);
static DEVICE_ATTR(body, S_IRUGO, variax_get_body, line6_nop_write);
static DEVICE_ATTR(pickup1_enable, S_IRUGO, variax_get_pickup1_enable,
return count;
}
-static DEVICE_ATTR(midi_mask_transmit, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_transmit, S_IWUSR | S_IRUGO,
midi_get_midi_mask_transmit, midi_set_midi_mask_transmit);
-static DEVICE_ATTR(midi_mask_receive, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_mask_receive, S_IWUSR | S_IRUGO,
midi_get_midi_mask_receive, midi_set_midi_mask_receive);
/* MIDI device destructor */
return count;
}
-static DEVICE_ATTR(impulse_volume, S_IWUGO | S_IRUGO, pcm_get_impulse_volume,
+static DEVICE_ATTR(impulse_volume, S_IWUSR | S_IRUGO, pcm_get_impulse_volume,
pcm_set_impulse_volume);
-static DEVICE_ATTR(impulse_period, S_IWUGO | S_IRUGO, pcm_get_impulse_period,
+static DEVICE_ATTR(impulse_period, S_IWUSR | S_IRUGO, pcm_get_impulse_period,
pcm_set_impulse_period);
#endif
#undef GET_SYSTEM_PARAM
/* POD special files: */
-static DEVICE_ATTR(channel, S_IWUGO | S_IRUGO, pod_get_channel,
+static DEVICE_ATTR(channel, S_IWUSR | S_IRUGO, pod_get_channel,
pod_set_channel);
static DEVICE_ATTR(clip, S_IRUGO, pod_wait_for_clip, line6_nop_write);
static DEVICE_ATTR(device_id, S_IRUGO, pod_get_device_id, line6_nop_write);
static DEVICE_ATTR(dirty, S_IRUGO, pod_get_dirty, line6_nop_write);
-static DEVICE_ATTR(dump, S_IWUGO | S_IRUGO, pod_get_dump, pod_set_dump);
-static DEVICE_ATTR(dump_buf, S_IWUGO | S_IRUGO, pod_get_dump_buf,
+static DEVICE_ATTR(dump, S_IWUSR | S_IRUGO, pod_get_dump, pod_set_dump);
+static DEVICE_ATTR(dump_buf, S_IWUSR | S_IRUGO, pod_get_dump_buf,
pod_set_dump_buf);
-static DEVICE_ATTR(finish, S_IWUGO, line6_nop_read, pod_set_finish);
+static DEVICE_ATTR(finish, S_IWUSR, line6_nop_read, pod_set_finish);
static DEVICE_ATTR(firmware_version, S_IRUGO, pod_get_firmware_version,
line6_nop_write);
-static DEVICE_ATTR(midi_postprocess, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(midi_postprocess, S_IWUSR | S_IRUGO,
pod_get_midi_postprocess, pod_set_midi_postprocess);
-static DEVICE_ATTR(monitor_level, S_IWUGO | S_IRUGO, pod_get_monitor_level,
+static DEVICE_ATTR(monitor_level, S_IWUSR | S_IRUGO, pod_get_monitor_level,
pod_set_monitor_level);
static DEVICE_ATTR(name, S_IRUGO, pod_get_name, line6_nop_write);
static DEVICE_ATTR(name_buf, S_IRUGO, pod_get_name_buf, line6_nop_write);
-static DEVICE_ATTR(retrieve_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_amp_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_amp_setup);
-static DEVICE_ATTR(retrieve_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_channel, S_IWUSR, line6_nop_read,
pod_set_retrieve_channel);
-static DEVICE_ATTR(retrieve_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(retrieve_effects_setup, S_IWUSR, line6_nop_read,
pod_set_retrieve_effects_setup);
-static DEVICE_ATTR(routing, S_IWUGO | S_IRUGO, pod_get_routing,
+static DEVICE_ATTR(routing, S_IWUSR | S_IRUGO, pod_get_routing,
pod_set_routing);
static DEVICE_ATTR(serial_number, S_IRUGO, pod_get_serial_number,
line6_nop_write);
-static DEVICE_ATTR(store_amp_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_amp_setup, S_IWUSR, line6_nop_read,
pod_set_store_amp_setup);
-static DEVICE_ATTR(store_channel, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_channel, S_IWUSR, line6_nop_read,
pod_set_store_channel);
-static DEVICE_ATTR(store_effects_setup, S_IWUGO, line6_nop_read,
+static DEVICE_ATTR(store_effects_setup, S_IWUSR, line6_nop_read,
pod_set_store_effects_setup);
-static DEVICE_ATTR(tuner_freq, S_IWUGO | S_IRUGO, pod_get_tuner_freq,
+static DEVICE_ATTR(tuner_freq, S_IWUSR | S_IRUGO, pod_get_tuner_freq,
pod_set_tuner_freq);
-static DEVICE_ATTR(tuner_mute, S_IWUGO | S_IRUGO, pod_get_tuner_mute,
+static DEVICE_ATTR(tuner_mute, S_IWUSR | S_IRUGO, pod_get_tuner_mute,
pod_set_tuner_mute);
static DEVICE_ATTR(tuner_note, S_IRUGO, pod_get_tuner_note, line6_nop_write);
static DEVICE_ATTR(tuner_pitch, S_IRUGO, pod_get_tuner_pitch, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
#endif
/* control info callback */
return count;
}
-static DEVICE_ATTR(led_red, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_red, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_red);
-static DEVICE_ATTR(led_green, S_IWUGO | S_IRUGO, line6_nop_read,
+static DEVICE_ATTR(led_green, S_IWUSR | S_IRUGO, line6_nop_read,
toneport_set_led_green);
static int toneport_send_cmd(struct usb_device *usbdev, int cmd1, int cmd2)
#endif
/* Variax workbench special files: */
-static DEVICE_ATTR(model, S_IWUGO | S_IRUGO, variax_get_model,
+static DEVICE_ATTR(model, S_IWUSR | S_IRUGO, variax_get_model,
variax_set_model);
-static DEVICE_ATTR(volume, S_IWUGO | S_IRUGO, variax_get_volume,
+static DEVICE_ATTR(volume, S_IWUSR | S_IRUGO, variax_get_volume,
variax_set_volume);
-static DEVICE_ATTR(tone, S_IWUGO | S_IRUGO, variax_get_tone, variax_set_tone);
+static DEVICE_ATTR(tone, S_IWUSR | S_IRUGO, variax_get_tone, variax_set_tone);
static DEVICE_ATTR(name, S_IRUGO, variax_get_name, line6_nop_write);
static DEVICE_ATTR(bank, S_IRUGO, variax_get_bank, line6_nop_write);
static DEVICE_ATTR(dump, S_IRUGO, variax_get_dump, line6_nop_write);
-static DEVICE_ATTR(active, S_IWUGO | S_IRUGO, variax_get_active,
+static DEVICE_ATTR(active, S_IWUSR | S_IRUGO, variax_get_active,
variax_set_active);
static DEVICE_ATTR(guitar, S_IRUGO, variax_get_guitar, line6_nop_write);
#ifdef CONFIG_LINE6_USB_RAW
-static DEVICE_ATTR(raw, S_IWUGO, line6_nop_read, line6_set_raw);
-static DEVICE_ATTR(raw2, S_IWUGO, line6_nop_read, variax_set_raw2);
+static DEVICE_ATTR(raw, S_IWUSR, line6_nop_read, line6_set_raw);
+static DEVICE_ATTR(raw2, S_IWUSR, line6_nop_read, variax_set_raw2);
#endif
/*
static void quickstart_exit(void)
{
input_unregister_device(quickstart_input);
- input_free_device(quickstart_input);
device_remove_file(&pf_device->dev, &dev_attr_pressed_button);
device_remove_file(&pf_device->dev, &dev_attr_buttons);
{
struct quickstart_btn **ptr = &quickstart_data.btn_lst;
int count;
+ int ret;
quickstart_input = input_allocate_device();
ptr = &((*ptr)->next);
}
- return input_register_device(quickstart_input);
+ ret = input_register_device(quickstart_input);
+ if (ret) {
+ input_free_device(quickstart_input);
+ return ret;
+ }
+
+ return 0;
}
static int __init quickstart_init(void)
{USB_DEVICE(0x2001, 0x3C09)}, /* D-Link */
{USB_DEVICE(0x2001, 0x3C0A)}, /* D-Link 3072 */
{USB_DEVICE(0x2019, 0xED14)}, /* Planex Communications, Inc. */
+ {USB_DEVICE(0x0411, 0x015D)}, /* Buffalo Airstation WLI-UC-GN */
{} /* Terminating entry */
};
udelay(10);
}
- if (TryCnt == TC_3W_POLL_MAX_TRY_CNT)
- panic("HwThreeWire(): CmdReg: %#X RE|WE bits are not clear!!\n", u1bTmp);
+ if (TryCnt == TC_3W_POLL_MAX_TRY_CNT) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire(): CmdReg:"
+ " %#X RE|WE bits are not clear!!\n", u1bTmp);
+ dump_stack();
+ return 0;
+ }
/* RTL8187S HSSI Read/Write Function */
u1bTmp = read_nic_byte(dev, RF_SW_CONFIG);
int idx;
int ByteCnt = nDataBufBitCnt / 8;
/* printk("%d\n",nDataBufBitCnt); */
- if ((nDataBufBitCnt % 8) != 0)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should be multiple of 8!!!\n",
- nDataBufBitCnt);
+ if ((nDataBufBitCnt % 8) != 0) {
+ printk(KERN_ERR "rtl8187se: "
+ "HwThreeWire(): nDataBufBitCnt(%d)"
+ " should be multiple of 8!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt += 8;
+ nDataBufBitCnt &= ~7;
+ }
- if (nDataBufBitCnt > 64)
- panic("HwThreeWire(): nDataBufBitCnt(%d) should <= 64!!!\n",
- nDataBufBitCnt);
+ if (nDataBufBitCnt > 64) {
+ printk(KERN_ERR "rtl8187se: HwThreeWire():"
+ " nDataBufBitCnt(%d) should <= 64!!!\n",
+ nDataBufBitCnt);
+ dump_stack();
+ nDataBufBitCnt = 64;
+ }
for (idx = 0; idx < ByteCnt; idx++)
write_nic_byte(dev, (SW_3W_DB0+idx), *(pDataBuf+idx));
{
u8 val8 = 0;
u8 ret = _SUCCESS;
- u8 PollingCnt = 20;
+ int PollingCnt = 20;
struct registry_priv *pregistrypriv = &padapter->registrypriv;
if (pregistrypriv->chip_version == RTL8712_FPGA) {
}
return count;
}
-static DEVICE_ATTR(silent, S_IWUGO | S_IRUGO,
+static DEVICE_ATTR(silent, S_IWUSR | S_IRUGO,
get_silent_state, set_silent_state);
{
if (virt_keyboard != NULL) {
input_unregister_device(virt_keyboard);
- input_free_device(virt_keyboard);
virt_keyboard = NULL;
}
}
/* Here we force report 512 byte hardware sector size to Kernel */
blk_queue_logical_block_size(dev->queue, 512);
- blk_queue_ordered(dev->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(dev->queue, REQ_FLUSH);
dev->thread = kthread_run(spectra_trans_thread, dev, "nand_thd");
if (IS_ERR(dev->thread)) {
/* Load tuner module */
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tuner", dev->tuner_addr, NULL);
+ "tuner", dev->tuner_addr, NULL);
memset(&tun_setup, 0, sizeof(tun_setup));
tun_setup.type = dev->tuner_type;
if (dev->caps.has_tda9874)
v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
- NULL, "tvaudio", I2C_ADDR_TDA9874, NULL);
+ "tvaudio", I2C_ADDR_TDA9874, NULL);
/* register and initialize V4L2 */
rc = tm6000_v4l2_register(dev);
__ATTR_RO(metrics_bytes_identical),
__ATTR_RO(metrics_bytes_sent),
__ATTR_RO(metrics_cpu_kcycles_used),
- __ATTR(metrics_reset, S_IWUGO, NULL, metrics_reset_store),
+ __ATTR(metrics_reset, S_IWUSR, NULL, metrics_reset_store),
};
/*
#ifndef SYS_DEF_H
#define SYS_DEF_H
+
+#include <linux/delay.h>
+
#define WB_LINUX
#define WB_LINUX_WPA_PSK
return sprintf(buf, "%llu\n", val);
}
-static DEVICE_ATTR(disksize, S_IRUGO | S_IWUGO,
+static DEVICE_ATTR(disksize, S_IRUGO | S_IWUSR,
disksize_show, disksize_store);
static DEVICE_ATTR(initstate, S_IRUGO, initstate_show, NULL);
-static DEVICE_ATTR(reset, S_IWUGO, NULL, reset_store);
+static DEVICE_ATTR(reset, S_IWUSR, NULL, reset_store);
static DEVICE_ATTR(num_reads, S_IRUGO, num_reads_show, NULL);
static DEVICE_ATTR(num_writes, S_IRUGO, num_writes_show, NULL);
static DEVICE_ATTR(invalid_io, S_IRUGO, invalid_io_show, NULL);
tty_lock();
+ /* some functions below drop BTM, so we need this bit */
+ set_bit(TTY_HUPPING, &tty->flags);
+
/* inuse_filps is protected by the single tty lock,
this really needs to change if we want to flush the
workqueue with the lock held */
}
spin_unlock(&tty_files_lock);
+ /*
+ * it drops BTM and thus races with reopen
+ * we protect the race by TTY_HUPPING
+ */
tty_ldisc_hangup(tty);
read_lock(&tasklist_lock);
tty->session = NULL;
tty->pgrp = NULL;
tty->ctrl_status = 0;
- set_bit(TTY_HUPPED, &tty->flags);
spin_unlock_irqrestore(&tty->ctrl_lock, flags);
/* Account for the p->signal references we killed */
* can't yet guarantee all that.
*/
set_bit(TTY_HUPPED, &tty->flags);
+ clear_bit(TTY_HUPPING, &tty->flags);
tty_ldisc_enable(tty);
tty_unlock();
{
struct tty_driver *driver = tty->driver;
- if (test_bit(TTY_CLOSING, &tty->flags))
+ if (test_bit(TTY_CLOSING, &tty->flags) ||
+ test_bit(TTY_HUPPING, &tty->flags) ||
+ test_bit(TTY_LDISC_CHANGING, &tty->flags))
return -EIO;
if (driver->type == TTY_DRIVER_TYPE_PTY &&
/* BTM here locks versus a hangup event */
WARN_ON(!tty_locked());
ret = ld->ops->open(tty);
+ if (ret)
+ clear_bit(TTY_LDISC_OPEN, &tty->flags);
return ret;
}
return 0;
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO
/*
* UIO Hilscher CIF card driver
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* Original code (C) 2005 Benedikt Spranger <b.spranger@linutronix.de>
*
* Licensed under GPL version 2 only.
* UIO driver for Hilscher NetX based fieldbus cards (cifX, comX).
* See http://www.hilscher.com for details.
*
- * (C) 2007 Hans J. Koch <hjk@linutronix.de>
+ * (C) 2007 Hans J. Koch <hjk@hansjkoch.de>
* (C) 2008 Manuel Traut <manut@linutronix.de>
*
* Licensed under GPL version 2 only.
* condition: callbacks we register can be executed at once, before we have
* initialized the struct atm_dev. To protect against this, all callbacks
* abort if atm_dev->dev_data is NULL. */
- atm_dev = atm_dev_register(instance->driver_name, &usbatm_atm_devops, -1, NULL);
+ atm_dev = atm_dev_register(instance->driver_name,
+ &instance->usb_intf->dev, &usbatm_atm_devops,
+ -1, NULL);
if (!atm_dev) {
usb_err(instance, "%s: failed to register ATM device!\n", __func__);
return -1;
/* temp init ATM device, set to 128kbit */
atm_dev->link_rate = 128 * 1000 / 424;
- ret = sysfs_create_link(&atm_dev->class_dev.kobj,
- &instance->usb_intf->dev.kobj, "device");
- if (ret) {
- atm_err(instance, "%s: sysfs_create_link failed: %d\n",
- __func__, ret);
- goto fail_sysfs;
- }
-
if (instance->driver->atm_start && ((ret = instance->driver->atm_start(instance, atm_dev)) < 0)) {
atm_err(instance, "%s: atm_start failed: %d!\n", __func__, ret);
goto fail;
return 0;
fail:
- sysfs_remove_link(&atm_dev->class_dev.kobj, "device");
- fail_sysfs:
instance->atm_dev = NULL;
atm_dev_deregister(atm_dev); /* usbatm_atm_dev_close will eventually be called */
return ret;
/* ATM finalize */
if (instance->atm_dev) {
- sysfs_remove_link(&instance->atm_dev->class_dev.kobj, "device");
atm_dev_deregister(instance->atm_dev);
instance->atm_dev = NULL;
}
*/
if (usb_endpoint_xfer_control(&urb->ep->desc)) {
+ if (hcd->self.uses_pio_for_control)
+ return ret;
if (hcd->self.uses_dma) {
urb->setup_dma = dma_map_single(
hcd->self.controller,
if (pdev->revision < 0xa4)
ehci->no_selective_suspend = 1;
break;
+
+ /* MCP89 chips on the MacBookAir3,1 give EPROTO when
+ * fetching device descriptors unless LPM is disabled.
+ * There are also intermittent problems enumerating
+ * devices with PPCD enabled.
+ */
+ case 0x0d9d:
+ ehci_info(ehci, "disable lpm/ppcd for nvidia mcp89");
+ ehci->has_lpm = 0;
+ ehci->has_ppcd = 0;
+ ehci->command &= ~CMD_PPCEE;
+ break;
}
break;
case PCI_VENDOR_ID_VIA:
static void xhci_disable_port(struct xhci_hcd *xhci, u16 wIndex,
u32 __iomem *addr, u32 port_status)
{
+ /* Don't allow the USB core to disable SuperSpeed ports. */
+ if (xhci->port_array[wIndex] == 0x03) {
+ xhci_dbg(xhci, "Ignoring request to disable "
+ "SuperSpeed port.\n");
+ return;
+ }
+
/* Write 1 to disable the port */
xhci_writel(xhci, port_status | PORT_PE, addr);
port_status = xhci_readl(xhci, addr);
xhci->dcbaa = NULL;
scratchpad_free(xhci);
+
+ xhci->num_usb2_ports = 0;
+ xhci->num_usb3_ports = 0;
+ kfree(xhci->usb2_ports);
+ kfree(xhci->usb3_ports);
+ kfree(xhci->port_array);
+
xhci->page_size = 0;
xhci->page_shift = 0;
xhci->bus_suspended = 0;
&xhci->ir_set->erst_dequeue);
}
+static void xhci_add_in_port(struct xhci_hcd *xhci, unsigned int num_ports,
+ u32 __iomem *addr, u8 major_revision)
+{
+ u32 temp, port_offset, port_count;
+ int i;
+
+ if (major_revision > 0x03) {
+ xhci_warn(xhci, "Ignoring unknown port speed, "
+ "Ext Cap %p, revision = 0x%x\n",
+ addr, major_revision);
+ /* Ignoring port protocol we can't understand. FIXME */
+ return;
+ }
+
+ /* Port offset and count in the third dword, see section 7.2 */
+ temp = xhci_readl(xhci, addr + 2);
+ port_offset = XHCI_EXT_PORT_OFF(temp);
+ port_count = XHCI_EXT_PORT_COUNT(temp);
+ xhci_dbg(xhci, "Ext Cap %p, port offset = %u, "
+ "count = %u, revision = 0x%x\n",
+ addr, port_offset, port_count, major_revision);
+ /* Port count includes the current port offset */
+ if (port_offset == 0 || (port_offset + port_count - 1) > num_ports)
+ /* WTF? "Valid values are ‘1’ to MaxPorts" */
+ return;
+ port_offset--;
+ for (i = port_offset; i < (port_offset + port_count); i++) {
+ /* Duplicate entry. Ignore the port if the revisions differ. */
+ if (xhci->port_array[i] != 0) {
+ xhci_warn(xhci, "Duplicate port entry, Ext Cap %p,"
+ " port %u\n", addr, i);
+ xhci_warn(xhci, "Port was marked as USB %u, "
+ "duplicated as USB %u\n",
+ xhci->port_array[i], major_revision);
+ /* Only adjust the roothub port counts if we haven't
+ * found a similar duplicate.
+ */
+ if (xhci->port_array[i] != major_revision &&
+ xhci->port_array[i] != (u8) -1) {
+ if (xhci->port_array[i] == 0x03)
+ xhci->num_usb3_ports--;
+ else
+ xhci->num_usb2_ports--;
+ xhci->port_array[i] = (u8) -1;
+ }
+ /* FIXME: Should we disable the port? */
+ }
+ xhci->port_array[i] = major_revision;
+ if (major_revision == 0x03)
+ xhci->num_usb3_ports++;
+ else
+ xhci->num_usb2_ports++;
+ }
+ /* FIXME: Should we disable ports not in the Extended Capabilities? */
+}
+
+/*
+ * Scan the Extended Capabilities for the "Supported Protocol Capabilities" that
+ * specify what speeds each port is supposed to be. We can't count on the port
+ * speed bits in the PORTSC register being correct until a device is connected,
+ * but we need to set up the two fake roothubs with the correct number of USB
+ * 3.0 and USB 2.0 ports at host controller initialization time.
+ */
+static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
+{
+ u32 __iomem *addr;
+ u32 offset;
+ unsigned int num_ports;
+ int i, port_index;
+
+ addr = &xhci->cap_regs->hcc_params;
+ offset = XHCI_HCC_EXT_CAPS(xhci_readl(xhci, addr));
+ if (offset == 0) {
+ xhci_err(xhci, "No Extended Capability registers, "
+ "unable to set up roothub.\n");
+ return -ENODEV;
+ }
+
+ num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
+ xhci->port_array = kzalloc(sizeof(*xhci->port_array)*num_ports, flags);
+ if (!xhci->port_array)
+ return -ENOMEM;
+
+ /*
+ * For whatever reason, the first capability offset is from the
+ * capability register base, not from the HCCPARAMS register.
+ * See section 5.3.6 for offset calculation.
+ */
+ addr = &xhci->cap_regs->hc_capbase + offset;
+ while (1) {
+ u32 cap_id;
+
+ cap_id = xhci_readl(xhci, addr);
+ if (XHCI_EXT_CAPS_ID(cap_id) == XHCI_EXT_CAPS_PROTOCOL)
+ xhci_add_in_port(xhci, num_ports, addr,
+ (u8) XHCI_EXT_PORT_MAJOR(cap_id));
+ offset = XHCI_EXT_CAPS_NEXT(cap_id);
+ if (!offset || (xhci->num_usb2_ports + xhci->num_usb3_ports)
+ == num_ports)
+ break;
+ /*
+ * Once you're into the Extended Capabilities, the offset is
+ * always relative to the register holding the offset.
+ */
+ addr += offset;
+ }
+
+ if (xhci->num_usb2_ports == 0 && xhci->num_usb3_ports == 0) {
+ xhci_warn(xhci, "No ports on the roothubs?\n");
+ return -ENODEV;
+ }
+ xhci_dbg(xhci, "Found %u USB 2.0 ports and %u USB 3.0 ports.\n",
+ xhci->num_usb2_ports, xhci->num_usb3_ports);
+ /*
+ * Note we could have all USB 3.0 ports, or all USB 2.0 ports.
+ * Not sure how the USB core will handle a hub with no ports...
+ */
+ if (xhci->num_usb2_ports) {
+ xhci->usb2_ports = kmalloc(sizeof(*xhci->usb2_ports)*
+ xhci->num_usb2_ports, flags);
+ if (!xhci->usb2_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] != 0x03) {
+ xhci->usb2_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 2.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb2_ports[port_index]);
+ port_index++;
+ }
+ }
+ if (xhci->num_usb3_ports) {
+ xhci->usb3_ports = kmalloc(sizeof(*xhci->usb3_ports)*
+ xhci->num_usb3_ports, flags);
+ if (!xhci->usb3_ports)
+ return -ENOMEM;
+
+ port_index = 0;
+ for (i = 0; i < num_ports; i++)
+ if (xhci->port_array[i] == 0x03) {
+ xhci->usb3_ports[port_index] =
+ &xhci->op_regs->port_status_base +
+ NUM_PORT_REGS*i;
+ xhci_dbg(xhci, "USB 3.0 port at index %u, "
+ "addr = %p\n", i,
+ xhci->usb3_ports[port_index]);
+ port_index++;
+ }
+ }
+ return 0;
+}
int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
{
if (scratchpad_alloc(xhci, flags))
goto fail;
+ if (xhci_setup_port_arrays(xhci, flags))
+ goto fail;
return 0;
cmd_completion = command->completion;
cmd_status = &command->status;
command->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((command->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ command->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&command->cmd_list, &virt_dev->cmd_list);
} else {
in_ctx = virt_dev->in_ctx;
/* Attempt to submit the Reset Device command to the command ring */
spin_lock_irqsave(&xhci->lock, flags);
reset_device_cmd->command_trb = xhci->cmd_ring->enqueue;
+
+ /* Enqueue pointer can be left pointing to the link TRB,
+ * we must handle that
+ */
+ if ((reset_device_cmd->command_trb->link.control & TRB_TYPE_BITMASK)
+ == TRB_TYPE(TRB_LINK))
+ reset_device_cmd->command_trb =
+ xhci->cmd_ring->enq_seg->next->trbs;
+
list_add_tail(&reset_device_cmd->cmd_list, &virt_dev->cmd_list);
ret = xhci_queue_reset_device(xhci, slot_id);
if (ret) {
#define STREAM_ID_TO_DB(p) (((p) & 0xffff) << 16)
+/**
+ * struct xhci_protocol_caps
+ * @revision: major revision, minor revision, capability ID,
+ * and next capability pointer.
+ * @name_string: Four ASCII characters to say which spec this xHC
+ * follows, typically "USB ".
+ * @port_info: Port offset, count, and protocol-defined information.
+ */
+struct xhci_protocol_caps {
+ u32 revision;
+ u32 name_string;
+ u32 port_info;
+};
+
+#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
+#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
+#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
+
/**
* struct xhci_container_ctx
* @type: Type of context. Used to calculated offsets to contained contexts.
u32 suspended_ports[8]; /* which ports are
suspended */
unsigned long resume_done[MAX_HC_PORTS];
+ /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
+ u8 *port_array;
+ /* Array of pointers to USB 3.0 PORTSC registers */
+ u32 __iomem **usb3_ports;
+ unsigned int num_usb3_ports;
+ /* Array of pointers to USB 2.0 PORTSC registers */
+ u32 __iomem **usb2_ports;
+ unsigned int num_usb2_ports;
};
/* For testing purposes */
.open = yurex_open,
.release = yurex_release,
.fasync = yurex_fasync,
+ .llseek = default_llseek,
};
* Otherwise, wait till the gadget driver hooks up.
*/
if (!is_otg_enabled(musb) && is_host_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
MUSB_HST_MODE(musb);
musb->xceiv->default_a = 1;
musb->xceiv->state = OTG_STATE_A_IDLE;
status = usb_add_hcd(musb_to_hcd(musb), -1, 0);
+ hcd->self.uses_pio_for_control = 1;
DBG(1, "%s mode, status %d, devctl %02x %c\n",
"HOST", status,
musb_readb(musb->mregs, MUSB_DEVCTL),
/* ----------------------------------------------------------------------- */
+/* Maps the buffer to dma */
+
+static inline void map_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ request->request.dma = dma_map_single(
+ musb->controller,
+ request->request.buf,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 1;
+ } else {
+ dma_sync_single_for_device(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->mapped = 0;
+ }
+}
+
+/* Unmap the buffer from dma and maps it back to cpu */
+static inline void unmap_dma_buffer(struct musb_request *request,
+ struct musb *musb)
+{
+ if (request->request.dma == DMA_ADDR_INVALID) {
+ DBG(20, "not unmapping a never mapped buffer\n");
+ return;
+ }
+ if (request->mapped) {
+ dma_unmap_single(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+ request->request.dma = DMA_ADDR_INVALID;
+ request->mapped = 0;
+ } else {
+ dma_sync_single_for_cpu(musb->controller,
+ request->request.dma,
+ request->request.length,
+ request->tx
+ ? DMA_TO_DEVICE
+ : DMA_FROM_DEVICE);
+
+ }
+}
+
/*
* Immediately complete a request.
*
ep->busy = 1;
spin_unlock(&musb->lock);
- if (is_dma_capable()) {
- if (req->mapped) {
- dma_unmap_single(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- req->request.dma = DMA_ADDR_INVALID;
- req->mapped = 0;
- } else if (req->request.dma != DMA_ADDR_INVALID)
- dma_sync_single_for_cpu(musb->controller,
- req->request.dma,
- req->request.length,
- req->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- }
+ if (is_dma_capable() && ep->dma)
+ unmap_dma_buffer(req, musb);
if (request->status == 0)
DBG(5, "%s done request %p, %d/%d\n",
ep->end_point.name, request,
#endif
if (!use_dma) {
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails
+ */
+ if (is_dma_capable() && musb_ep->dma)
+ unmap_dma_buffer(req, musb);
+
musb_write_fifo(musb_ep->hw_ep, fifo_count,
(u8 *) (request->buf + request->actual));
request->actual += fifo_count;
return;
}
#endif
+ /*
+ * Unmap the dma buffer back to cpu if dma channel
+ * programming fails. This buffer is mapped if the
+ * channel allocation is successful
+ */
+ if (is_dma_capable() && musb_ep->dma) {
+ unmap_dma_buffer(req, musb);
+
+ /*
+ * Clear DMAENAB and AUTOCLEAR for the
+ * PIO mode transfer
+ */
+ csr &= ~(MUSB_RXCSR_DMAENAB | MUSB_RXCSR_AUTOCLEAR);
+ musb_writew(epio, MUSB_RXCSR, csr);
+ }
musb_read_fifo(musb_ep->hw_ep, fifo_count, (u8 *)
(request->buf + request->actual));
if (!request)
return;
}
+#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_TUSB_OMAP_DMA)
exit:
+#endif
/* Analyze request */
rxstate(musb, to_musb_request(request));
}
request->epnum = musb_ep->current_epnum;
request->tx = musb_ep->is_in;
- if (is_dma_capable() && musb_ep->dma) {
- if (request->request.dma == DMA_ADDR_INVALID) {
- request->request.dma = dma_map_single(
- musb->controller,
- request->request.buf,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 1;
- } else {
- dma_sync_single_for_device(musb->controller,
- request->request.dma,
- request->request.length,
- request->tx
- ? DMA_TO_DEVICE
- : DMA_FROM_DEVICE);
- request->mapped = 0;
- }
- } else
+ if (is_dma_capable() && musb_ep->dma)
+ map_dma_buffer(request, musb);
+ else
request->mapped = 0;
spin_lock_irqsave(&musb->lock, lockflags);
spin_unlock_irqrestore(&musb->lock, flags);
if (is_otg_enabled(musb)) {
+ struct usb_hcd *hcd = musb_to_hcd(musb);
+
DBG(3, "OTG startup...\n");
/* REVISIT: funcall to other code, which also
musb->gadget_driver = NULL;
musb->g.dev.driver = NULL;
spin_unlock_irqrestore(&musb->lock, flags);
+ } else {
+ hcd->self.uses_pio_for_control = 1;
}
}
}
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_R2000KU_TRUE_RNG) },
+ { USB_DEVICE(FTDI_VID, FTDI_VARDAAN_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0100_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0101_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_0102_PID) },
.driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk },
{ USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) },
{ USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) },
+ { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_CT29B_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) },
{ USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) },
/* Lenz LI-USB Computer Interface. */
#define FTDI_LENZ_LIUSB_PID 0xD780
+/* Vardaan Enterprises Serial Interface VEUSB422R3 */
+#define FTDI_VARDAAN_PID 0xF070
+
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
*/
#define RTSYSTEMS_VID 0x2100 /* Vendor ID */
#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */
+#define RTSYSTEMS_CT29B_PID 0x9e54 /* CT29B Radio Cable */
/*
* Bayer Ascensia Contour blood glucose meter USB-converter cable.
.suspend = usb_serial_suspend,
.resume = usb_serial_resume,
.no_dynamic_id = 1,
+ .supports_autosuspend = 1,
};
/* There is no MODULE_DEVICE_TABLE for usbserial.c. Instead
return -ENODEV;
fixup_generic(driver);
+ if (driver->usb_driver)
+ driver->usb_driver->supports_autosuspend = 1;
if (!driver->description)
driver->description = driver->driver.name;
size_t hdr_size;
struct socket *sock;
- sock = rcu_dereference_check(vq->private_data,
- lockdep_is_held(&vq->mutex));
+ /* TODO: check that we are running from vhost_worker?
+ * Not sure it's worth it, it's straight-forward enough. */
+ sock = rcu_dereference_check(vq->private_data, 1);
if (!sock)
return;
int r;
if (!write_length)
return 0;
+ write_length += write_address % VHOST_PAGE_SIZE;
write_address /= VHOST_PAGE_SIZE;
for (;;) {
u64 base = (u64)(unsigned long)log_base;
if (write_length <= VHOST_PAGE_SIZE)
break;
write_length -= VHOST_PAGE_SIZE;
- write_address += VHOST_PAGE_SIZE;
+ write_address += 1;
}
return r;
}
goto err_release_pl_mem;
}
- ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
- if (ret)
- goto err_release_pl_mem;
-
/* Initialize par */
da8xx_fb_info->var.bits_per_pixel = lcd_cfg->bpp;
ret = fb_alloc_cmap(&da8xx_fb_info->cmap, PALETTE_SIZE, 0);
if (ret)
- goto err_free_irq;
+ goto err_release_pl_mem;
da8xx_fb_info->cmap.len = par->palette_sz;
/* initialize var_screeninfo */
goto err_cpu_freq;
}
#endif
+
+ ret = request_irq(par->irq, lcdc_irq_handler, 0, DRIVER_NAME, par);
+ if (ret)
+ goto irq_freq;
return 0;
+irq_freq:
#ifdef CONFIG_CPU_FREQ
err_cpu_freq:
unregister_framebuffer(da8xx_fb_info);
err_dealloc_cmap:
fb_dealloc_cmap(&da8xx_fb_info->cmap);
-err_free_irq:
- free_irq(par->irq, par);
-
err_release_pl_mem:
dma_free_coherent(NULL, PALETTE_SIZE, par->v_palette_base,
par->p_palette_base);
* @cmap: frame buffer colormap structure
* @len: length of @cmap
* @transp: boolean, 1 if there is transparency, 0 otherwise
+ * @flags: flags for kmalloc memory allocation
*
* Allocates memory for a colormap @cmap. @len is the
* number of entries in the palette.
#define DC_HFILT_COUNT 0x100
#define DC_VFILT_COUNT 0x100
#define VP_COEFF_SIZE 0x1000
+#define VP_PAL_COUNT 0x100
#define OUTPUT_CRT 0x01
#define OUTPUT_PANEL 0x02
uint64_t vp[VP_REG_COUNT];
uint64_t fp[FP_REG_COUNT];
- uint32_t pal[DC_PAL_COUNT];
+ uint32_t dc_pal[DC_PAL_COUNT];
+ uint32_t vp_pal[VP_PAL_COUNT];
uint32_t hcoeff[DC_HFILT_COUNT * 2];
uint32_t vcoeff[DC_VFILT_COUNT];
uint32_t vp_coeff[VP_COEFF_SIZE / 4];
memcpy(par->vp, par->vp_regs, sizeof(par->vp));
memcpy(par->fp, par->vp_regs + VP_FP_START, sizeof(par->fp));
- /* save the palette */
+ /* save the display controller palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- par->pal[i] = read_dc(par, DC_PAL_DATA);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ par->dc_pal[i] = read_dc(par, DC_PAL_DATA);
+
+ /* save the video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ par->vp_pal[i] = read_vp(par, VP_PDR);
/* save the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
/* restore the palette */
write_dc(par, DC_PAL_ADDRESS, 0);
- for (i = 0; i < ARRAY_SIZE(par->pal); i++)
- write_dc(par, DC_PAL_DATA, par->pal[i]);
+ for (i = 0; i < ARRAY_SIZE(par->dc_pal); i++)
+ write_dc(par, DC_PAL_DATA, par->dc_pal[i]);
/* restore the horizontal filter coefficients */
filt = par->dc[DC_IRQ_FILT_CTL] | DC_IRQ_FILT_CTL_H_FILT_SEL;
}
}
+ /* restore video processor palette */
+ write_vp(par, VP_PAR, 0);
+ for (i = 0; i < ARRAY_SIZE(par->vp_pal); i++)
+ write_vp(par, VP_PDR, par->vp_pal[i]);
+
/* restore video coeff ram */
memcpy(par->vp_regs + VP_VCR, par->vp_coeff, sizeof(par->vp_coeff));
}
abs(cmode->yres - mode->yres);
if (diff > d) {
diff = d;
+ diff_refresh = abs(cmode->refresh - mode->refresh);
best = cmode;
} else if (diff == d) {
d = abs(cmode->refresh - mode->refresh);
This is the driver for the built-in watchdog timer on the IT8712F
Super I/0 chipset used on many motherboards.
+ If the driver does not work, then make sure that the game port in
+ the BIOS is enabled.
+
To compile this driver as a module, choose M here: the
module will be called it8712f_wdt.
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
-#include <linux/reboot.h>
#include <linux/types.h>
#include <linux/uaccess.h>
#include <linux/watchdog.h>
}
}
-static int bcm63xx_wdt_notify_sys(struct notifier_block *this,
- unsigned long code, void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- bcm63xx_wdt_pause();
- return NOTIFY_DONE;
-}
-
static const struct file_operations bcm63xx_wdt_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.fops = &bcm63xx_wdt_fops,
};
-static struct notifier_block bcm63xx_wdt_notifier = {
- .notifier_call = bcm63xx_wdt_notify_sys,
-};
-
-static int bcm63xx_wdt_probe(struct platform_device *pdev)
+static int __devinit bcm63xx_wdt_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
wdt_time);
}
- ret = register_reboot_notifier(&bcm63xx_wdt_notifier);
- if (ret) {
- dev_err(&pdev->dev, "failed to register reboot_notifier\n");
- goto unregister_timer;
- }
-
ret = misc_register(&bcm63xx_wdt_miscdev);
if (ret < 0) {
dev_err(&pdev->dev, "failed to register watchdog device\n");
- goto unregister_reboot_notifier;
+ goto unregister_timer;
}
dev_info(&pdev->dev, " started, timer margin: %d sec\n",
return 0;
-unregister_reboot_notifier:
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
unregister_timer:
bcm63xx_timer_unregister(TIMER_WDT_ID);
unmap:
return ret;
}
-static int bcm63xx_wdt_remove(struct platform_device *pdev)
+static int __devexit bcm63xx_wdt_remove(struct platform_device *pdev)
{
if (!nowayout)
bcm63xx_wdt_pause();
misc_deregister(&bcm63xx_wdt_miscdev);
-
- iounmap(bcm63xx_wdt_device.regs);
-
- unregister_reboot_notifier(&bcm63xx_wdt_notifier);
bcm63xx_timer_unregister(TIMER_WDT_ID);
-
+ iounmap(bcm63xx_wdt_device.regs);
return 0;
}
+static void bcm63xx_wdt_shutdown(struct platform_device *pdev)
+{
+ bcm63xx_wdt_pause();
+}
+
static struct platform_driver bcm63xx_wdt = {
.probe = bcm63xx_wdt_probe,
- .remove = bcm63xx_wdt_remove,
+ .remove = __devexit_p(bcm63xx_wdt_remove),
+ .shutdown = bcm63xx_wdt_shutdown,
.driver = {
+ .owner = THIS_MODULE,
.name = "bcm63xx-wdt",
}
};
#include <linux/module.h>
#include <linux/miscdevice.h>
#include <linux/watchdog.h>
+#include <linux/fs.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/io.h>
* document number 322169-001, 322170-003: 5 Series, 3400 Series (PCH)
* document number 320066-003, 320257-008: EP80597 (IICH)
* document number TBD : Cougar Point (CPT)
+ * document number TBD : Patsburg (PBG)
*/
/*
TCO_CPT29, /* Cougar Point */
TCO_CPT30, /* Cougar Point */
TCO_CPT31, /* Cougar Point */
- TCO_PBG, /* Patsburg */
+ TCO_PBG1, /* Patsburg */
+ TCO_PBG2, /* Patsburg */
};
static struct {
{"Cougar Point", 2},
{"Cougar Point", 2},
{"Patsburg", 2},
+ {"Patsburg", 2},
{NULL, 0}
};
{ ITCO_PCI_DEVICE(0x1c5d, TCO_CPT29)},
{ ITCO_PCI_DEVICE(0x1c5e, TCO_CPT30)},
{ ITCO_PCI_DEVICE(0x1c5f, TCO_CPT31)},
- { ITCO_PCI_DEVICE(0x1d40, TCO_PBG)},
+ { ITCO_PCI_DEVICE(0x1d40, TCO_PBG1)},
+ { ITCO_PCI_DEVICE(0x1d41, TCO_PBG2)},
{ 0, }, /* End of list */
};
MODULE_DEVICE_TABLE(pci, iTCO_wdt_pci_tbl);
register_balloon(&balloon_sysdev);
- /* Initialise the balloon with excess memory space. */
- extra_pfn_end = min(e820_end_of_ram_pfn(),
+ /*
+ * Initialise the balloon with excess memory space. We need
+ * to make sure we don't add memory which doesn't exist or
+ * logically exist. The E820 map can be trimmed to be smaller
+ * than the amount of physical memory due to the mem= command
+ * line parameter. And if this is a 32-bit non-HIGHMEM kernel
+ * on a system with memory which requires highmem to access,
+ * don't try to use it.
+ */
+ extra_pfn_end = min(min(max_pfn, e820_end_of_ram_pfn()),
(unsigned long)PFN_DOWN(xen_extra_mem_start + xen_extra_mem_size));
for (pfn = PFN_UP(xen_extra_mem_start);
pfn < extra_pfn_end;
static struct irq_info *irq_info;
static int *pirq_to_irq;
-static int nr_pirqs;
static int *evtchn_to_irq;
struct cpu_evtchn_s {
return ret;
}
-/* callers of this function should make sure that PHYSDEVOP_get_nr_pirqs
- * succeeded otherwise nr_pirqs won't hold the right value */
-static int find_unbound_pirq(void)
+static int find_unbound_pirq(int type)
{
- int i;
- for (i = nr_pirqs-1; i >= 0; i--) {
+ int rc, i;
+ struct physdev_get_free_pirq op_get_free_pirq;
+ op_get_free_pirq.type = type;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_free_pirq, &op_get_free_pirq);
+ if (!rc)
+ return op_get_free_pirq.pirq;
+
+ for (i = 0; i < nr_irqs; i++) {
if (pirq_to_irq[i] < 0)
return i;
}
if (irq == start)
goto no_irqs;
- res = irq_alloc_desc_at(irq, 0);
+ res = irq_alloc_desc_at(irq, -1);
if (WARN_ON(res != irq))
return -1;
spin_lock(&irq_mapping_update_lock);
- if ((pirq > nr_pirqs) || (gsi > nr_irqs)) {
+ if ((pirq > nr_irqs) || (gsi > nr_irqs)) {
printk(KERN_WARNING "xen_map_pirq_gsi: %s %s is incorrect!\n",
- pirq > nr_pirqs ? "nr_pirqs" :"",
- gsi > nr_irqs ? "nr_irqs" : "");
+ pirq > nr_irqs ? "pirq" :"",
+ gsi > nr_irqs ? "gsi" : "");
goto out;
}
if (identity_mapped_irq(gsi) || (!xen_initial_domain() &&
xen_pv_domain())) {
irq = gsi;
- irq_alloc_desc_at(irq, 0);
+ irq_alloc_desc_at(irq, -1);
} else
irq = find_unbound_irq();
#include <linux/msi.h>
#include "../pci/msi.h"
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc)
{
spin_lock(&irq_mapping_update_lock);
- *irq = find_unbound_irq();
- if (*irq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_IRQ) {
+ *irq = find_unbound_irq();
+ if (*irq == -1)
+ goto out;
+ }
- *pirq = find_unbound_pirq();
- if (*pirq == -1)
- goto out;
+ if (alloc & XEN_ALLOC_PIRQ) {
+ *pirq = find_unbound_pirq(MAP_PIRQ_TYPE_MSI);
+ if (*pirq == -1)
+ goto out;
+ }
set_irq_chip_and_handler_name(*irq, &xen_pirq_chip,
handle_level_irq, name);
printk(KERN_WARNING "unmap irq failed %d\n", rc);
goto out;
}
+ pirq_to_irq[info->u.pirq.pirq] = -1;
}
irq_info[irq] = mk_unbound_info();
return gsi_from_irq(irq);
}
+int xen_irq_from_pirq(unsigned pirq)
+{
+ return pirq_to_irq[pirq];
+}
+
int bind_evtchn_to_irq(unsigned int evtchn)
{
int irq;
return ret;
}
+static void restore_cpu_pirqs(void)
+{
+ int pirq, rc, irq, gsi;
+ struct physdev_map_pirq map_irq;
+
+ for (pirq = 0; pirq < nr_irqs; pirq++) {
+ irq = pirq_to_irq[pirq];
+ if (irq == -1)
+ continue;
+
+ /* save/restore of PT devices doesn't work, so at this point the
+ * only devices present are GSI based emulated devices */
+ gsi = gsi_from_irq(irq);
+ if (!gsi)
+ continue;
+
+ map_irq.domid = DOMID_SELF;
+ map_irq.type = MAP_PIRQ_TYPE_GSI;
+ map_irq.index = gsi;
+ map_irq.pirq = pirq;
+
+ rc = HYPERVISOR_physdev_op(PHYSDEVOP_map_pirq, &map_irq);
+ if (rc) {
+ printk(KERN_WARNING "xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",
+ gsi, irq, pirq, rc);
+ irq_info[irq] = mk_unbound_info();
+ pirq_to_irq[pirq] = -1;
+ continue;
+ }
+
+ printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
+
+ startup_pirq(irq);
+ }
+}
+
static void restore_cpu_virqs(unsigned int cpu)
{
struct evtchn_bind_virq bind_virq;
unmask_evtchn(evtchn);
}
+
+ restore_cpu_pirqs();
}
static struct irq_chip xen_dynamic_chip __read_mostly = {
void __init xen_init_IRQ(void)
{
- int i, rc;
- struct physdev_nr_pirqs op_nr_pirqs;
+ int i;
cpu_evtchn_mask_p = kcalloc(nr_cpu_ids, sizeof(struct cpu_evtchn_s),
GFP_KERNEL);
irq_info = kcalloc(nr_irqs, sizeof(*irq_info), GFP_KERNEL);
- rc = HYPERVISOR_physdev_op(PHYSDEVOP_get_nr_pirqs, &op_nr_pirqs);
- if (rc < 0) {
- nr_pirqs = nr_irqs;
- if (rc != -ENOSYS)
- printk(KERN_WARNING "PHYSDEVOP_get_nr_pirqs returned rc=%d\n", rc);
- } else {
- if (xen_pv_domain() && !xen_initial_domain())
- nr_pirqs = max((int)op_nr_pirqs.nr_pirqs, nr_irqs);
- else
- nr_pirqs = op_nr_pirqs.nr_pirqs;
- }
- pirq_to_irq = kcalloc(nr_pirqs, sizeof(*pirq_to_irq), GFP_KERNEL);
- for (i = 0; i < nr_pirqs; i++)
+ /* We are using nr_irqs as the maximum number of pirq available but
+ * that number is actually chosen by Xen and we don't know exactly
+ * what it is. Be careful choosing high pirq numbers. */
+ pirq_to_irq = kcalloc(nr_irqs, sizeof(*pirq_to_irq), GFP_KERNEL);
+ for (i = 0; i < nr_irqs; i++)
pirq_to_irq[i] = -1;
evtchn_to_irq = kcalloc(NR_EVENT_CHANNELS, sizeof(*evtchn_to_irq),
if (!*cancelled) {
xen_irq_resume();
+ xen_console_resume();
xen_timer_resume();
}
}
}
-static DEFINE_MUTEX(autofs4_ioctl_mutex);
-
static long autofs4_root_ioctl(struct file *filp,
unsigned int cmd, unsigned long arg)
{
- long ret;
struct inode *inode = filp->f_dentry->d_inode;
-
- mutex_lock(&autofs4_ioctl_mutex);
- ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
- mutex_unlock(&autofs4_ioctl_mutex);
-
- return ret;
+ return autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
}
#ifdef CONFIG_COMPAT
struct inode *inode = filp->f_path.dentry->d_inode;
int ret;
- mutex_lock(&autofs4_ioctl_mutex);
if (cmd == AUTOFS_IOC_READY || cmd == AUTOFS_IOC_FAIL)
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd, arg);
else
ret = autofs4_root_ioctl_unlocked(inode, filp, cmd,
(unsigned long)compat_ptr(arg));
- mutex_unlock(&autofs4_ioctl_mutex);
return ret;
}
static struct bio *compressed_bio_alloc(struct block_device *bdev,
u64 first_byte, gfp_t gfp_flags)
{
- struct bio *bio;
int nr_vecs;
nr_vecs = bio_get_nr_vecs(bdev);
- bio = bio_alloc(gfp_flags, nr_vecs);
-
- if (bio == NULL && (current->flags & PF_MEMALLOC)) {
- while (!bio && (nr_vecs /= 2))
- bio = bio_alloc(gfp_flags, nr_vecs);
- }
-
- if (bio) {
- bio->bi_size = 0;
- bio->bi_bdev = bdev;
- bio->bi_sector = first_byte >> 9;
- }
- return bio;
+ return btrfs_bio_alloc(bdev, first_byte >> 9, nr_vecs, gfp_flags);
}
static int check_compressed_csum(struct inode *inode,
int extents_thresh;
int free_extents;
int total_bitmaps;
- int ro:1;
- int dirty:1;
- int iref:1;
+ unsigned int ro:1;
+ unsigned int dirty:1;
+ unsigned int iref:1;
int disk_cache_state;
#include <linux/freezer.h>
#include <linux/crc32c.h>
#include <linux/slab.h>
+#include <linux/migrate.h>
#include "compat.h"
#include "ctree.h"
#include "disk-io.h"
ret = btree_read_extent_buffer_pages(root, eb, start + PAGE_CACHE_SIZE,
btrfs_header_generation(eb));
BUG_ON(ret);
+ WARN_ON(!btrfs_header_flag(eb, BTRFS_HEADER_FLAG_WRITTEN));
+
found_start = btrfs_header_bytenr(eb);
if (found_start != start) {
WARN_ON(1);
__btree_submit_bio_done);
}
+#ifdef CONFIG_MIGRATION
+static int btree_migratepage(struct address_space *mapping,
+ struct page *newpage, struct page *page)
+{
+ /*
+ * we can't safely write a btree page from here,
+ * we haven't done the locking hook
+ */
+ if (PageDirty(page))
+ return -EAGAIN;
+ /*
+ * Buffers may be managed in a filesystem specific way.
+ * We must have no buffers or drop them.
+ */
+ if (page_has_private(page) &&
+ !try_to_release_page(page, GFP_KERNEL))
+ return -EAGAIN;
+ return migrate_page(mapping, newpage, page);
+}
+#endif
+
static int btree_writepage(struct page *page, struct writeback_control *wbc)
{
struct extent_io_tree *tree;
}
redirty_page_for_writepage(wbc, page);
- eb = btrfs_find_tree_block(root, page_offset(page),
- PAGE_CACHE_SIZE);
+ eb = btrfs_find_tree_block(root, page_offset(page), PAGE_CACHE_SIZE);
WARN_ON(!eb);
was_dirty = test_and_set_bit(EXTENT_BUFFER_DIRTY, &eb->bflags);
.releasepage = btree_releasepage,
.invalidatepage = btree_invalidatepage,
.sync_page = block_sync_page,
+#ifdef CONFIG_MIGRATION
+ .migratepage = btree_migratepage,
+#endif
};
int readahead_tree_block(struct btrfs_root *root, u64 bytenr, u32 blocksize,
blocksize = btrfs_level_size(root, btrfs_root_level(&root->root_item));
root->node = read_tree_block(root, btrfs_root_bytenr(&root->root_item),
blocksize, generation);
- BUG_ON(!root->node);
+ if (!root->node || !btrfs_buffer_uptodate(root->node, generation)) {
+ free_extent_buffer(root->node);
+ return -EIO;
+ }
root->commit_root = btrfs_root_node(root);
return 0;
}
GFP_NOFS);
struct btrfs_root *csum_root = kzalloc(sizeof(struct btrfs_root),
GFP_NOFS);
- struct btrfs_root *tree_root = kzalloc(sizeof(struct btrfs_root),
- GFP_NOFS);
- struct btrfs_fs_info *fs_info = kzalloc(sizeof(*fs_info),
- GFP_NOFS);
+ struct btrfs_root *tree_root = btrfs_sb(sb);
+ struct btrfs_fs_info *fs_info = tree_root->fs_info;
struct btrfs_root *chunk_root = kzalloc(sizeof(struct btrfs_root),
GFP_NOFS);
struct btrfs_root *dev_root = kzalloc(sizeof(struct btrfs_root),
static struct dentry *btrfs_get_parent(struct dentry *child)
{
struct inode *dir = child->d_inode;
- static struct dentry *dentry;
+ struct dentry *dentry;
struct btrfs_root *root = BTRFS_I(dir)->root;
struct btrfs_path *path;
struct extent_buffer *leaf;
return ERR_PTR(ret);
}
+static int btrfs_get_name(struct dentry *parent, char *name,
+ struct dentry *child)
+{
+ struct inode *inode = child->d_inode;
+ struct inode *dir = parent->d_inode;
+ struct btrfs_path *path;
+ struct btrfs_root *root = BTRFS_I(dir)->root;
+ struct btrfs_inode_ref *iref;
+ struct btrfs_root_ref *rref;
+ struct extent_buffer *leaf;
+ unsigned long name_ptr;
+ struct btrfs_key key;
+ int name_len;
+ int ret;
+
+ if (!dir || !inode)
+ return -EINVAL;
+
+ if (!S_ISDIR(dir->i_mode))
+ return -EINVAL;
+
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+ path->leave_spinning = 1;
+
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ key.objectid = BTRFS_I(inode)->root->root_key.objectid;
+ key.type = BTRFS_ROOT_BACKREF_KEY;
+ key.offset = (u64)-1;
+ root = root->fs_info->tree_root;
+ } else {
+ key.objectid = inode->i_ino;
+ key.offset = dir->i_ino;
+ key.type = BTRFS_INODE_REF_KEY;
+ }
+
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0) {
+ btrfs_free_path(path);
+ return ret;
+ } else if (ret > 0) {
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ path->slots[0]--;
+ } else {
+ btrfs_free_path(path);
+ return -ENOENT;
+ }
+ }
+ leaf = path->nodes[0];
+
+ if (inode->i_ino == BTRFS_FIRST_FREE_OBJECTID) {
+ rref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_root_ref);
+ name_ptr = (unsigned long)(rref + 1);
+ name_len = btrfs_root_ref_name_len(leaf, rref);
+ } else {
+ iref = btrfs_item_ptr(leaf, path->slots[0],
+ struct btrfs_inode_ref);
+ name_ptr = (unsigned long)(iref + 1);
+ name_len = btrfs_inode_ref_name_len(leaf, iref);
+ }
+
+ read_extent_buffer(leaf, name, name_ptr, name_len);
+ btrfs_free_path(path);
+
+ /*
+ * have to add the null termination to make sure that reconnect_path
+ * gets the right len for strlen
+ */
+ name[name_len] = '\0';
+
+ return 0;
+}
+
const struct export_operations btrfs_export_ops = {
.encode_fh = btrfs_encode_fh,
.fh_to_dentry = btrfs_fh_to_dentry,
.fh_to_parent = btrfs_fh_to_parent,
.get_parent = btrfs_get_parent,
+ .get_name = btrfs_get_name,
};
static int cache_block_group(struct btrfs_block_group_cache *cache,
struct btrfs_trans_handle *trans,
+ struct btrfs_root *root,
int load_cache_only)
{
struct btrfs_fs_info *fs_info = cache->fs_info;
/*
* We can't do the read from on-disk cache during a commit since we need
- * to have the normal tree locking.
+ * to have the normal tree locking. Also if we are currently trying to
+ * allocate blocks for the tree root we can't do the fast caching since
+ * we likely hold important locks.
*/
- if (!trans->transaction->in_commit) {
+ if (!trans->transaction->in_commit &&
+ (root && root != root->fs_info->tree_root)) {
spin_lock(&cache->lock);
if (cache->cached != BTRFS_CACHE_NO) {
spin_unlock(&cache->lock);
struct btrfs_root *root = block_group->fs_info->tree_root;
struct inode *inode = NULL;
u64 alloc_hint = 0;
+ int dcs = BTRFS_DC_ERROR;
int num_pages = 0;
int retries = 0;
int ret = 0;
spin_lock(&block_group->lock);
if (block_group->cached != BTRFS_CACHE_FINISHED) {
+ /* We're not cached, don't bother trying to write stuff out */
+ dcs = BTRFS_DC_WRITTEN;
spin_unlock(&block_group->lock);
goto out_put;
}
ret = btrfs_prealloc_file_range_trans(inode, trans, 0, 0, num_pages,
num_pages, num_pages,
&alloc_hint);
+ if (!ret)
+ dcs = BTRFS_DC_SETUP;
btrfs_free_reserved_data_space(inode, num_pages);
out_put:
iput(inode);
btrfs_release_path(root, path);
out:
spin_lock(&block_group->lock);
- if (ret)
- block_group->disk_cache_state = BTRFS_DC_ERROR;
- else
- block_group->disk_cache_state = BTRFS_DC_SETUP;
+ block_group->disk_cache_state = dcs;
spin_unlock(&block_group->lock);
return ret;
u64 btrfs_reduce_alloc_profile(struct btrfs_root *root, u64 flags)
{
- u64 num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ u64 num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
if (num_devices == 1)
flags &= ~(BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID0);
* our reservation.
*/
if (unused <= space_info->total_bytes) {
- unused -= space_info->total_bytes;
+ unused = space_info->total_bytes - unused;
if (unused >= num_bytes) {
if (!reserved)
space_info->bytes_reserved += orig_bytes;
* space back to the block group, otherwise we will leak space.
*/
if (!alloc && cache->cached == BTRFS_CACHE_NO)
- cache_block_group(cache, trans, 1);
+ cache_block_group(cache, trans, NULL, 1);
byte_in_group = bytenr - cache->key.objectid;
WARN_ON(byte_in_group > cache->key.offset);
btrfs_get_block_group(block_group);
search_start = block_group->key.objectid;
+ /*
+ * this can happen if we end up cycling through all the
+ * raid types, but we want to make sure we only allocate
+ * for the proper type.
+ */
+ if (!block_group_bits(block_group, data)) {
+ u64 extra = BTRFS_BLOCK_GROUP_DUP |
+ BTRFS_BLOCK_GROUP_RAID1 |
+ BTRFS_BLOCK_GROUP_RAID10;
+
+ /*
+ * if they asked for extra copies and this block group
+ * doesn't provide them, bail. This does allow us to
+ * fill raid0 from raid1.
+ */
+ if ((data & extra) && !(block_group->flags & extra))
+ goto loop;
+ }
+
have_block_group:
if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
u64 free_percent;
- ret = cache_block_group(block_group, trans, 1);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 1);
if (block_group->cached == BTRFS_CACHE_FINISHED)
goto have_block_group;
if (loop > LOOP_CACHING_NOWAIT ||
(loop > LOOP_FIND_IDEAL &&
atomic_read(&space_info->caching_threads) < 2)) {
- ret = cache_block_group(block_group, trans, 0);
+ ret = cache_block_group(block_group, trans,
+ orig_root, 0);
BUG_ON(ret);
}
found_uncached_bg = true;
u64 num_bytes = ins->offset;
block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
- cache_block_group(block_group, trans, 0);
+ cache_block_group(block_group, trans, NULL, 0);
caching_ctl = get_caching_control(block_group);
if (!caching_ctl) {
NULL, NULL);
BUG_ON(ret < 0);
if (ret > 0) {
- ret = btrfs_del_orphan_item(trans, tree_root,
- root->root_key.objectid);
- BUG_ON(ret);
+ /* if we fail to delete the orphan item this time
+ * around, it'll get picked up the next time.
+ *
+ * The most common failure here is just -ENOENT.
+ */
+ btrfs_del_orphan_item(trans, tree_root,
+ root->root_key.objectid);
}
}
u64 stripped = BTRFS_BLOCK_GROUP_RAID0 |
BTRFS_BLOCK_GROUP_RAID1 | BTRFS_BLOCK_GROUP_RAID10;
- num_devices = root->fs_info->fs_devices->rw_devices;
+ /*
+ * we add in the count of missing devices because we want
+ * to make sure that any RAID levels on a degraded FS
+ * continue to be honored.
+ */
+ num_devices = root->fs_info->fs_devices->rw_devices +
+ root->fs_info->fs_devices->missing_devices;
+
if (num_devices == 1) {
stripped |= BTRFS_BLOCK_GROUP_DUP;
stripped = flags & ~stripped;
break;
if (ret != 0)
goto error;
-
leaf = path->nodes[0];
btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
cache = kzalloc(sizeof(*cache), GFP_NOFS);
bio_put(bio);
}
-static struct bio *
-extent_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
- gfp_t gfp_flags)
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+ gfp_t gfp_flags)
{
struct bio *bio;
else
nr = bio_get_nr_vecs(bdev);
- bio = extent_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
+ bio = btrfs_bio_alloc(bdev, sector, nr, GFP_NOFS | __GFP_HIGH);
bio_add_page(bio, page, page_size, offset);
bio->bi_end_io = end_io_func;
int extent_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len, get_extent_t *get_extent)
{
- int ret;
+ int ret = 0;
u64 off = start;
u64 max = start + len;
u32 flags = 0;
+ u32 found_type;
+ u64 last;
u64 disko = 0;
+ struct btrfs_key found_key;
struct extent_map *em = NULL;
struct extent_state *cached_state = NULL;
+ struct btrfs_path *path;
+ struct btrfs_file_extent_item *item;
int end = 0;
u64 em_start = 0, em_len = 0;
unsigned long emflags;
- ret = 0;
+ int hole = 0;
if (len == 0)
return -EINVAL;
+ path = btrfs_alloc_path();
+ if (!path)
+ return -ENOMEM;
+ path->leave_spinning = 1;
+
+ ret = btrfs_lookup_file_extent(NULL, BTRFS_I(inode)->root,
+ path, inode->i_ino, -1, 0);
+ if (ret < 0) {
+ btrfs_free_path(path);
+ return ret;
+ }
+ WARN_ON(!ret);
+ path->slots[0]--;
+ item = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_file_extent_item);
+ btrfs_item_key_to_cpu(path->nodes[0], &found_key, path->slots[0]);
+ found_type = btrfs_key_type(&found_key);
+
+ /* No extents, just return */
+ if (found_key.objectid != inode->i_ino ||
+ found_type != BTRFS_EXTENT_DATA_KEY) {
+ btrfs_free_path(path);
+ return 0;
+ }
+ last = found_key.offset;
+ btrfs_free_path(path);
+
lock_extent_bits(&BTRFS_I(inode)->io_tree, start, start + len, 0,
&cached_state, GFP_NOFS);
em = get_extent(inode, NULL, 0, off, max - off, 0);
ret = PTR_ERR(em);
goto out;
}
+
while (!end) {
+ hole = 0;
off = em->start + em->len;
if (off >= max)
end = 1;
+ if (em->block_start == EXTENT_MAP_HOLE) {
+ hole = 1;
+ goto next;
+ }
+
em_start = em->start;
em_len = em->len;
if (em->block_start == EXTENT_MAP_LAST_BYTE) {
end = 1;
flags |= FIEMAP_EXTENT_LAST;
- } else if (em->block_start == EXTENT_MAP_HOLE) {
- flags |= FIEMAP_EXTENT_UNWRITTEN;
} else if (em->block_start == EXTENT_MAP_INLINE) {
flags |= (FIEMAP_EXTENT_DATA_INLINE |
FIEMAP_EXTENT_NOT_ALIGNED);
if (test_bit(EXTENT_FLAG_COMPRESSED, &em->flags))
flags |= FIEMAP_EXTENT_ENCODED;
+next:
emflags = em->flags;
free_extent_map(em);
em = NULL;
-
if (!end) {
em = get_extent(inode, NULL, 0, off, max - off, 0);
if (!em)
}
emflags = em->flags;
}
+
if (test_bit(EXTENT_FLAG_VACANCY, &emflags)) {
flags |= FIEMAP_EXTENT_LAST;
end = 1;
}
- ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
- em_len, flags);
- if (ret)
- goto out_free;
+ if (em_start == last) {
+ flags |= FIEMAP_EXTENT_LAST;
+ end = 1;
+ }
+
+ if (!hole) {
+ ret = fiemap_fill_next_extent(fieinfo, em_start, disko,
+ em_len, flags);
+ if (ret)
+ goto out_free;
+ }
}
out_free:
free_extent_map(em);
spin_lock(&tree->buffer_lock);
eb = radix_tree_lookup(&tree->buffer, start >> PAGE_CACHE_SHIFT);
- if (!eb)
- goto out;
+ if (!eb) {
+ spin_unlock(&tree->buffer_lock);
+ return ret;
+ }
if (test_bit(EXTENT_BUFFER_DIRTY, &eb->bflags)) {
ret = 0;
struct extent_io_tree *tree,
u64 start, u64 end, struct page *locked_page,
unsigned long op);
+struct bio *
+btrfs_bio_alloc(struct block_device *bdev, u64 first_sector, int nr_vecs,
+ gfp_t gfp_flags);
#endif
struct page **prepared_pages,
struct iov_iter *i)
{
- size_t copied;
+ size_t copied = 0;
int pg = 0;
int offset = pos & (PAGE_CACHE_SIZE - 1);
+ int total_copied = 0;
while (write_bytes > 0) {
size_t count = min_t(size_t,
PAGE_CACHE_SIZE - offset, write_bytes);
struct page *page = prepared_pages[pg];
-again:
- if (unlikely(iov_iter_fault_in_readable(i, count)))
- return -EFAULT;
-
- /* Copy data from userspace to the current page */
- copied = iov_iter_copy_from_user(page, i, offset, count);
+ /*
+ * Copy data from userspace to the current page
+ *
+ * Disable pagefault to avoid recursive lock since
+ * the pages are already locked
+ */
+ pagefault_disable();
+ copied = iov_iter_copy_from_user_atomic(page, i, offset, count);
+ pagefault_enable();
/* Flush processor's dcache for this page */
flush_dcache_page(page);
iov_iter_advance(i, copied);
write_bytes -= copied;
+ total_copied += copied;
+ /* Return to btrfs_file_aio_write to fault page */
if (unlikely(copied == 0)) {
- count = min_t(size_t, PAGE_CACHE_SIZE - offset,
- iov_iter_single_seg_count(i));
- goto again;
+ break;
}
if (unlikely(copied < PAGE_CACHE_SIZE - offset)) {
offset = 0;
}
}
- return 0;
+ return total_copied;
}
/*
unsigned long last_index;
int will_write;
int buffered = 0;
+ int copied = 0;
+ int dirty_pages = 0;
will_write = ((file->f_flags & O_DSYNC) || IS_SYNC(inode) ||
(file->f_flags & O_DIRECT));
WARN_ON(num_pages > nrptrs);
memset(pages, 0, sizeof(struct page *) * nrptrs);
- ret = btrfs_delalloc_reserve_space(inode, write_bytes);
+ /*
+ * Fault pages before locking them in prepare_pages
+ * to avoid recursive lock
+ */
+ if (unlikely(iov_iter_fault_in_readable(&i, write_bytes))) {
+ ret = -EFAULT;
+ goto out;
+ }
+
+ ret = btrfs_delalloc_reserve_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
if (ret)
goto out;
pos, first_index, last_index,
write_bytes);
if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
+ btrfs_delalloc_release_space(inode,
+ num_pages << PAGE_CACHE_SHIFT);
goto out;
}
- ret = btrfs_copy_from_user(pos, num_pages,
+ copied = btrfs_copy_from_user(pos, num_pages,
write_bytes, pages, &i);
- if (ret == 0) {
+ dirty_pages = (copied + PAGE_CACHE_SIZE - 1) >>
+ PAGE_CACHE_SHIFT;
+
+ if (num_pages > dirty_pages) {
+ if (copied > 0)
+ atomic_inc(
+ &BTRFS_I(inode)->outstanding_extents);
+ btrfs_delalloc_release_space(inode,
+ (num_pages - dirty_pages) <<
+ PAGE_CACHE_SHIFT);
+ }
+
+ if (copied > 0) {
dirty_and_release_pages(NULL, root, file, pages,
- num_pages, pos, write_bytes);
+ dirty_pages, pos, copied);
}
btrfs_drop_pages(pages, num_pages);
- if (ret) {
- btrfs_delalloc_release_space(inode, write_bytes);
- goto out;
- }
- if (will_write) {
- filemap_fdatawrite_range(inode->i_mapping, pos,
- pos + write_bytes - 1);
- } else {
- balance_dirty_pages_ratelimited_nr(inode->i_mapping,
- num_pages);
- if (num_pages <
- (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
- btrfs_btree_balance_dirty(root, 1);
- btrfs_throttle(root);
+ if (copied > 0) {
+ if (will_write) {
+ filemap_fdatawrite_range(inode->i_mapping, pos,
+ pos + copied - 1);
+ } else {
+ balance_dirty_pages_ratelimited_nr(
+ inode->i_mapping,
+ dirty_pages);
+ if (dirty_pages <
+ (root->leafsize >> PAGE_CACHE_SHIFT) + 1)
+ btrfs_btree_balance_dirty(root, 1);
+ btrfs_throttle(root);
+ }
}
- pos += write_bytes;
- num_written += write_bytes;
+ pos += copied;
+ num_written += copied;
cond_resched();
}
if ((file->f_flags & O_DSYNC) || IS_SYNC(inode)) {
trans = btrfs_start_transaction(root, 0);
+ if (IS_ERR(trans)) {
+ num_written = PTR_ERR(trans);
+ goto done;
+ }
+ mutex_lock(&inode->i_mutex);
ret = btrfs_log_dentry_safe(trans, root,
file->f_dentry);
+ mutex_unlock(&inode->i_mutex);
if (ret == 0) {
ret = btrfs_sync_log(trans, root);
if (ret == 0)
(start_pos + num_written - 1) >> PAGE_CACHE_SHIFT);
}
}
+done:
current->backing_dev_info = NULL;
return num_written ? num_written : err;
}
(unsigned long long)BTRFS_I(inode)->generation,
(unsigned long long)generation,
(unsigned long long)block_group->key.objectid);
- goto out;
+ goto free_cache;
}
if (!num_entries)
return 0;
}
+ node = rb_first(&block_group->free_space_offset);
+ if (!node) {
+ iput(inode);
+ return 0;
+ }
+
last_index = (i_size_read(inode) - 1) >> PAGE_CACHE_SHIFT;
filemap_write_and_wait(inode->i_mapping);
btrfs_wait_ordered_range(inode, inode->i_size &
*/
first_page_offset = (sizeof(u32) * num_checksums) + sizeof(u64);
- node = rb_first(&block_group->free_space_offset);
- if (!node)
- goto out_free;
-
/*
* Lock all pages first so we can lock the extent safely.
*
add_async_extent(async_cow, start, num_bytes,
total_compressed, pages, nr_pages_ret);
- if (start + num_bytes < end && start + num_bytes < actual_end) {
+ if (start + num_bytes < end) {
start += num_bytes;
pages = NULL;
cond_resched();
BTRFS_I(inode)->index_cnt = 2;
BTRFS_I(inode)->root = root;
BTRFS_I(inode)->generation = trans->transid;
+ inode->i_generation = BTRFS_I(inode)->generation;
btrfs_set_inode_space_info(root, inode);
if (mode & S_IFDIR)
}
static int btrfs_add_nondir(struct btrfs_trans_handle *trans,
- struct dentry *dentry, struct inode *inode,
- int backref, u64 index)
+ struct inode *dir, struct dentry *dentry,
+ struct inode *inode, int backref, u64 index)
{
- int err = btrfs_add_link(trans, dentry->d_parent->d_inode,
- inode, dentry->d_name.name,
- dentry->d_name.len, backref, index);
+ int err = btrfs_add_link(trans, dir, inode,
+ dentry->d_name.name, dentry->d_name.len,
+ backref, index);
if (!err) {
d_instantiate(dentry, inode);
return 0;
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, mode, &index);
err = PTR_ERR(inode);
if (IS_ERR(inode))
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino,
- objectid, BTRFS_I(dir)->block_group, mode,
- &index);
+ dentry->d_name.len, dir->i_ino, objectid,
+ BTRFS_I(dir)->block_group, mode, &index);
err = PTR_ERR(inode);
if (IS_ERR(inode))
goto out_unlock;
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
return -EPERM;
btrfs_inc_nlink(inode);
+ inode->i_ctime = CURRENT_TIME;
err = btrfs_set_inode_index(dir, &index);
if (err)
btrfs_set_trans_block_group(trans, dir);
ihold(inode);
- err = btrfs_add_nondir(trans, dentry, inode, 1, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 1, index);
if (err) {
drop_inode = 1;
} else {
+ struct dentry *parent = dget_parent(dentry);
btrfs_update_inode_block_group(trans, dir);
err = btrfs_update_inode(trans, root, inode);
BUG_ON(err);
- btrfs_log_new_name(trans, inode, NULL, dentry->d_parent);
+ btrfs_log_new_name(trans, inode, NULL, parent);
+ dput(parent);
}
nr = trans->blocks_used;
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, S_IFDIR | mode,
&index);
if (IS_ERR(inode)) {
if (err)
goto out_fail;
- err = btrfs_add_link(trans, dentry->d_parent->d_inode,
- inode, dentry->d_name.name,
- dentry->d_name.len, 0, index);
+ err = btrfs_add_link(trans, dir, inode, dentry->d_name.name,
+ dentry->d_name.len, 0, index);
if (err)
goto out_fail;
u64 bytes;
u32 *csums;
void *private;
+
+ /* number of bios pending for this dio */
+ atomic_t pending_bios;
+
+ /* IO errors */
+ int errors;
+
+ struct bio *orig_bio;
};
static void btrfs_endio_direct_read(struct bio *bio, int err)
{
+ struct btrfs_dio_private *dip = bio->bi_private;
struct bio_vec *bvec_end = bio->bi_io_vec + bio->bi_vcnt - 1;
struct bio_vec *bvec = bio->bi_io_vec;
- struct btrfs_dio_private *dip = bio->bi_private;
struct inode *inode = dip->inode;
struct btrfs_root *root = BTRFS_I(inode)->root;
u64 start;
struct btrfs_trans_handle *trans;
struct btrfs_ordered_extent *ordered = NULL;
struct extent_state *cached_state = NULL;
+ u64 ordered_offset = dip->logical_offset;
+ u64 ordered_bytes = dip->bytes;
int ret;
if (err)
goto out_done;
-
- ret = btrfs_dec_test_ordered_pending(inode, &ordered,
- dip->logical_offset, dip->bytes);
+again:
+ ret = btrfs_dec_test_first_ordered_pending(inode, &ordered,
+ &ordered_offset,
+ ordered_bytes);
if (!ret)
- goto out_done;
+ goto out_test;
BUG_ON(!ordered);
out:
btrfs_delalloc_release_metadata(inode, ordered->len);
btrfs_end_transaction(trans, root);
+ ordered_offset = ordered->file_offset + ordered->len;
btrfs_put_ordered_extent(ordered);
btrfs_put_ordered_extent(ordered);
+
+out_test:
+ /*
+ * our bio might span multiple ordered extents. If we haven't
+ * completed the accounting for the whole dio, go back and try again
+ */
+ if (ordered_offset < dip->logical_offset + dip->bytes) {
+ ordered_bytes = dip->logical_offset + dip->bytes -
+ ordered_offset;
+ goto again;
+ }
out_done:
bio->bi_private = dip->private;
return 0;
}
+static void btrfs_end_dio_bio(struct bio *bio, int err)
+{
+ struct btrfs_dio_private *dip = bio->bi_private;
+
+ if (err) {
+ printk(KERN_ERR "btrfs direct IO failed ino %lu rw %lu "
+ "sector %#Lx len %u err no %d\n",
+ dip->inode->i_ino, bio->bi_rw,
+ (unsigned long long)bio->bi_sector, bio->bi_size, err);
+ dip->errors = 1;
+
+ /*
+ * before atomic variable goto zero, we must make sure
+ * dip->errors is perceived to be set.
+ */
+ smp_mb__before_atomic_dec();
+ }
+
+ /* if there are more bios still pending for this dio, just exit */
+ if (!atomic_dec_and_test(&dip->pending_bios))
+ goto out;
+
+ if (dip->errors)
+ bio_io_error(dip->orig_bio);
+ else {
+ set_bit(BIO_UPTODATE, &dip->orig_bio->bi_flags);
+ bio_endio(dip->orig_bio, 0);
+ }
+out:
+ bio_put(bio);
+}
+
+static struct bio *btrfs_dio_bio_alloc(struct block_device *bdev,
+ u64 first_sector, gfp_t gfp_flags)
+{
+ int nr_vecs = bio_get_nr_vecs(bdev);
+ return btrfs_bio_alloc(bdev, first_sector, nr_vecs, gfp_flags);
+}
+
+static inline int __btrfs_submit_dio_bio(struct bio *bio, struct inode *inode,
+ int rw, u64 file_offset, int skip_sum,
+ u32 *csums)
+{
+ int write = rw & REQ_WRITE;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ int ret;
+
+ bio_get(bio);
+ ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
+ if (ret)
+ goto err;
+
+ if (write && !skip_sum) {
+ ret = btrfs_wq_submit_bio(root->fs_info,
+ inode, rw, bio, 0, 0,
+ file_offset,
+ __btrfs_submit_bio_start_direct_io,
+ __btrfs_submit_bio_done);
+ goto err;
+ } else if (!skip_sum)
+ btrfs_lookup_bio_sums_dio(root, inode, bio,
+ file_offset, csums);
+
+ ret = btrfs_map_bio(root, rw, bio, 0, 1);
+err:
+ bio_put(bio);
+ return ret;
+}
+
+static int btrfs_submit_direct_hook(int rw, struct btrfs_dio_private *dip,
+ int skip_sum)
+{
+ struct inode *inode = dip->inode;
+ struct btrfs_root *root = BTRFS_I(inode)->root;
+ struct btrfs_mapping_tree *map_tree = &root->fs_info->mapping_tree;
+ struct bio *bio;
+ struct bio *orig_bio = dip->orig_bio;
+ struct bio_vec *bvec = orig_bio->bi_io_vec;
+ u64 start_sector = orig_bio->bi_sector;
+ u64 file_offset = dip->logical_offset;
+ u64 submit_len = 0;
+ u64 map_length;
+ int nr_pages = 0;
+ u32 *csums = dip->csums;
+ int ret = 0;
+
+ bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev, start_sector, GFP_NOFS);
+ if (!bio)
+ return -ENOMEM;
+ bio->bi_private = dip;
+ bio->bi_end_io = btrfs_end_dio_bio;
+ atomic_inc(&dip->pending_bios);
+
+ map_length = orig_bio->bi_size;
+ ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+ &map_length, NULL, 0);
+ if (ret) {
+ bio_put(bio);
+ return -EIO;
+ }
+
+ while (bvec <= (orig_bio->bi_io_vec + orig_bio->bi_vcnt - 1)) {
+ if (unlikely(map_length < submit_len + bvec->bv_len ||
+ bio_add_page(bio, bvec->bv_page, bvec->bv_len,
+ bvec->bv_offset) < bvec->bv_len)) {
+ /*
+ * inc the count before we submit the bio so
+ * we know the end IO handler won't happen before
+ * we inc the count. Otherwise, the dip might get freed
+ * before we're done setting it up
+ */
+ atomic_inc(&dip->pending_bios);
+ ret = __btrfs_submit_dio_bio(bio, inode, rw,
+ file_offset, skip_sum,
+ csums);
+ if (ret) {
+ bio_put(bio);
+ atomic_dec(&dip->pending_bios);
+ goto out_err;
+ }
+
+ if (!skip_sum)
+ csums = csums + nr_pages;
+ start_sector += submit_len >> 9;
+ file_offset += submit_len;
+
+ submit_len = 0;
+ nr_pages = 0;
+
+ bio = btrfs_dio_bio_alloc(orig_bio->bi_bdev,
+ start_sector, GFP_NOFS);
+ if (!bio)
+ goto out_err;
+ bio->bi_private = dip;
+ bio->bi_end_io = btrfs_end_dio_bio;
+
+ map_length = orig_bio->bi_size;
+ ret = btrfs_map_block(map_tree, READ, start_sector << 9,
+ &map_length, NULL, 0);
+ if (ret) {
+ bio_put(bio);
+ goto out_err;
+ }
+ } else {
+ submit_len += bvec->bv_len;
+ nr_pages ++;
+ bvec++;
+ }
+ }
+
+ ret = __btrfs_submit_dio_bio(bio, inode, rw, file_offset, skip_sum,
+ csums);
+ if (!ret)
+ return 0;
+
+ bio_put(bio);
+out_err:
+ dip->errors = 1;
+ /*
+ * before atomic variable goto zero, we must
+ * make sure dip->errors is perceived to be set.
+ */
+ smp_mb__before_atomic_dec();
+ if (atomic_dec_and_test(&dip->pending_bios))
+ bio_io_error(dip->orig_bio);
+
+ /* bio_end_io() will handle error, so we needn't return it */
+ return 0;
+}
+
static void btrfs_submit_direct(int rw, struct bio *bio, struct inode *inode,
loff_t file_offset)
{
dip->disk_bytenr = (u64)bio->bi_sector << 9;
bio->bi_private = dip;
+ dip->errors = 0;
+ dip->orig_bio = bio;
+ atomic_set(&dip->pending_bios, 0);
if (write)
bio->bi_end_io = btrfs_endio_direct_write;
else
bio->bi_end_io = btrfs_endio_direct_read;
- ret = btrfs_bio_wq_end_io(root->fs_info, bio, 0);
- if (ret)
- goto out_err;
-
- if (write && !skip_sum) {
- ret = btrfs_wq_submit_bio(BTRFS_I(inode)->root->fs_info,
- inode, rw, bio, 0, 0,
- dip->logical_offset,
- __btrfs_submit_bio_start_direct_io,
- __btrfs_submit_bio_done);
- if (ret)
- goto out_err;
+ ret = btrfs_submit_direct_hook(rw, dip, skip_sum);
+ if (!ret)
return;
- } else if (!skip_sum)
- btrfs_lookup_bio_sums_dio(root, inode, bio,
- dip->logical_offset, dip->csums);
-
- ret = btrfs_map_bio(root, rw, bio, 0, 1);
- if (ret)
- goto out_err;
- return;
-out_err:
- kfree(dip->csums);
- kfree(dip);
free_ordered:
/*
* If this is a write, we need to clean up the reserved space and kill
*/
if (write) {
struct btrfs_ordered_extent *ordered;
- ordered = btrfs_lookup_ordered_extent(inode,
- dip->logical_offset);
+ ordered = btrfs_lookup_ordered_extent(inode, file_offset);
if (!test_bit(BTRFS_ORDERED_PREALLOC, &ordered->flags) &&
!test_bit(BTRFS_ORDERED_NOCOW, &ordered->flags))
btrfs_free_reserved_extent(root, ordered->start,
BUG_ON(ret);
if (old_inode->i_ino != BTRFS_FIRST_FREE_OBJECTID) {
- btrfs_log_new_name(trans, old_inode, old_dir,
- new_dentry->d_parent);
+ struct dentry *parent = dget_parent(new_dentry);
+ btrfs_log_new_name(trans, old_inode, old_dir, parent);
+ dput(parent);
btrfs_end_log_trans(root);
}
out_fail:
btrfs_set_trans_block_group(trans, dir);
inode = btrfs_new_inode(trans, root, dir, dentry->d_name.name,
- dentry->d_name.len,
- dentry->d_parent->d_inode->i_ino, objectid,
+ dentry->d_name.len, dir->i_ino, objectid,
BTRFS_I(dir)->block_group, S_IFLNK|S_IRWXUGO,
&index);
err = PTR_ERR(inode);
}
btrfs_set_trans_block_group(trans, inode);
- err = btrfs_add_nondir(trans, dentry, inode, 0, index);
+ err = btrfs_add_nondir(trans, dir, dentry, inode, 0, index);
if (err)
drop_inode = 1;
else {
struct btrfs_root *root = BTRFS_I(inode)->root;
struct btrfs_key ins;
u64 cur_offset = start;
+ u64 i_size;
int ret = 0;
bool own_trans = true;
(actual_len > inode->i_size) &&
(cur_offset > inode->i_size)) {
if (cur_offset > actual_len)
- i_size_write(inode, actual_len);
+ i_size = actual_len;
else
- i_size_write(inode, cur_offset);
- i_size_write(inode, cur_offset);
- btrfs_ordered_update_i_size(inode, cur_offset, NULL);
+ i_size = cur_offset;
+ i_size_write(inode, i_size);
+ btrfs_ordered_update_i_size(inode, i_size, NULL);
}
ret = btrfs_update_inode(trans, root, inode);
btrfs_wait_ordered_range(inode, alloc_start, alloc_end - alloc_start);
mutex_lock(&inode->i_mutex);
+ ret = inode_newsize_ok(inode, alloc_end);
+ if (ret)
+ goto out;
+
if (alloc_start > inode->i_size) {
ret = btrfs_cont_expand(inode, alloc_start);
if (ret)
.readlink = generic_readlink,
.follow_link = page_follow_link_light,
.put_link = page_put_link,
+ .getattr = btrfs_getattr,
.permission = btrfs_permission,
.setxattr = btrfs_setxattr,
.getxattr = btrfs_getxattr,
struct btrfs_inode_item *inode_item;
struct extent_buffer *leaf;
struct btrfs_root *new_root;
- struct inode *dir = dentry->d_parent->d_inode;
+ struct dentry *parent = dget_parent(dentry);
+ struct inode *dir;
int ret;
int err;
u64 objectid;
ret = btrfs_find_free_objectid(NULL, root->fs_info->tree_root,
0, &objectid);
- if (ret)
+ if (ret) {
+ dput(parent);
return ret;
+ }
+
+ dir = parent->d_inode;
+
/*
* 1 - inode item
* 2 - refs
* 2 - dir items
*/
trans = btrfs_start_transaction(root, 6);
- if (IS_ERR(trans))
+ if (IS_ERR(trans)) {
+ dput(parent);
return PTR_ERR(trans);
+ }
leaf = btrfs_alloc_free_block(trans, root, root->leafsize,
0, objectid, NULL, 0, 0, 0);
d_instantiate(dentry, btrfs_lookup_dentry(dir, dentry));
fail:
+ dput(parent);
if (async_transid) {
*async_transid = trans->transid;
err = btrfs_commit_transaction_async(trans, root, 1);
char *name, int namelen, u64 *async_transid)
{
struct inode *inode;
+ struct dentry *parent;
struct btrfs_pending_snapshot *pending_snapshot;
struct btrfs_trans_handle *trans;
int ret;
btrfs_orphan_cleanup(pending_snapshot->snap);
- inode = btrfs_lookup_dentry(dentry->d_parent->d_inode, dentry);
+ parent = dget_parent(dentry);
+ inode = btrfs_lookup_dentry(parent->d_inode, dentry);
+ dput(parent);
if (IS_ERR(inode)) {
ret = PTR_ERR(inode);
goto fail;
static noinline int btrfs_ioctl_snap_create(struct file *file,
void __user *arg, int subvol,
- int async)
+ int v2)
{
struct btrfs_ioctl_vol_args *vol_args = NULL;
- struct btrfs_ioctl_async_vol_args *async_vol_args = NULL;
+ struct btrfs_ioctl_vol_args_v2 *vol_args_v2 = NULL;
char *name;
u64 fd;
- u64 transid = 0;
int ret;
- if (async) {
- async_vol_args = memdup_user(arg, sizeof(*async_vol_args));
- if (IS_ERR(async_vol_args))
- return PTR_ERR(async_vol_args);
+ if (v2) {
+ u64 transid = 0;
+ u64 *ptr = NULL;
+
+ vol_args_v2 = memdup_user(arg, sizeof(*vol_args_v2));
+ if (IS_ERR(vol_args_v2))
+ return PTR_ERR(vol_args_v2);
+
+ if (vol_args_v2->flags & ~BTRFS_SUBVOL_CREATE_ASYNC) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+ name = vol_args_v2->name;
+ fd = vol_args_v2->fd;
+ vol_args_v2->name[BTRFS_SUBVOL_NAME_MAX] = '\0';
+
+ if (vol_args_v2->flags & BTRFS_SUBVOL_CREATE_ASYNC)
+ ptr = &transid;
+
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, ptr);
- name = async_vol_args->name;
- fd = async_vol_args->fd;
- async_vol_args->name[BTRFS_SNAPSHOT_NAME_MAX] = '\0';
+ if (ret == 0 && ptr &&
+ copy_to_user(arg +
+ offsetof(struct btrfs_ioctl_vol_args_v2,
+ transid), ptr, sizeof(*ptr)))
+ ret = -EFAULT;
} else {
vol_args = memdup_user(arg, sizeof(*vol_args));
if (IS_ERR(vol_args))
name = vol_args->name;
fd = vol_args->fd;
vol_args->name[BTRFS_PATH_NAME_MAX] = '\0';
- }
-
- ret = btrfs_ioctl_snap_create_transid(file, name, fd,
- subvol, &transid);
- if (!ret && async) {
- if (copy_to_user(arg +
- offsetof(struct btrfs_ioctl_async_vol_args,
- transid), &transid, sizeof(transid)))
- return -EFAULT;
+ ret = btrfs_ioctl_snap_create_transid(file, name, fd,
+ subvol, NULL);
}
-
+out:
kfree(vol_args);
- kfree(async_vol_args);
+ kfree(vol_args_v2);
return ret;
}
olen = len = src->i_size - off;
/* if we extend to eof, continue to block boundary */
if (off + len == src->i_size)
- len = ((src->i_size + bs-1) & ~(bs-1))
- - off;
+ len = ALIGN(src->i_size, bs) - off;
/* verify the end result is block aligned */
- if ((off & (bs-1)) ||
- ((off + len) & (bs-1)))
+ if (!IS_ALIGNED(off, bs) || !IS_ALIGNED(off + len, bs) ||
+ !IS_ALIGNED(destoff, bs))
goto out_unlock;
/* do any pending delalloc/csum calc on src, one way or
* but shouldn't round up the file size
*/
endoff = new_key.offset + datal;
- if (endoff > off+olen)
- endoff = off+olen;
+ if (endoff > destoff+olen)
+ endoff = destoff+olen;
if (endoff > inode->i_size)
btrfs_i_size_write(inode, endoff);
return btrfs_ioctl_getversion(file, argp);
case BTRFS_IOC_SNAP_CREATE:
return btrfs_ioctl_snap_create(file, argp, 0, 0);
- case BTRFS_IOC_SNAP_CREATE_ASYNC:
+ case BTRFS_IOC_SNAP_CREATE_V2:
return btrfs_ioctl_snap_create(file, argp, 0, 1);
case BTRFS_IOC_SUBVOL_CREATE:
return btrfs_ioctl_snap_create(file, argp, 1, 0);
char name[BTRFS_PATH_NAME_MAX + 1];
};
-#define BTRFS_SNAPSHOT_NAME_MAX 4079
-struct btrfs_ioctl_async_vol_args {
+#define BTRFS_SUBVOL_CREATE_ASYNC (1ULL << 0)
+
+#define BTRFS_SUBVOL_NAME_MAX 4039
+struct btrfs_ioctl_vol_args_v2 {
__s64 fd;
__u64 transid;
- char name[BTRFS_SNAPSHOT_NAME_MAX + 1];
+ __u64 flags;
+ __u64 unused[4];
+ char name[BTRFS_SUBVOL_NAME_MAX + 1];
};
#define BTRFS_INO_LOOKUP_PATH_MAX 4080
struct btrfs_ioctl_space_args)
#define BTRFS_IOC_START_SYNC _IOR(BTRFS_IOCTL_MAGIC, 24, __u64)
#define BTRFS_IOC_WAIT_SYNC _IOW(BTRFS_IOCTL_MAGIC, 22, __u64)
-#define BTRFS_IOC_SNAP_CREATE_ASYNC _IOW(BTRFS_IOCTL_MAGIC, 23, \
- struct btrfs_ioctl_async_vol_args)
+#define BTRFS_IOC_SNAP_CREATE_V2 _IOW(BTRFS_IOCTL_MAGIC, 23, \
+ struct btrfs_ioctl_vol_args_v2)
#endif
return 0;
}
+/*
+ * this is used to account for finished IO across a given range
+ * of the file. The IO may span ordered extents. If
+ * a given ordered_extent is completely done, 1 is returned, otherwise
+ * 0.
+ *
+ * test_and_set_bit on a flag in the struct btrfs_ordered_extent is used
+ * to make sure this function only returns 1 once for a given ordered extent.
+ *
+ * file_offset is updated to one byte past the range that is recorded as
+ * complete. This allows you to walk forward in the file.
+ */
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+ struct btrfs_ordered_extent **cached,
+ u64 *file_offset, u64 io_size)
+{
+ struct btrfs_ordered_inode_tree *tree;
+ struct rb_node *node;
+ struct btrfs_ordered_extent *entry = NULL;
+ int ret;
+ u64 dec_end;
+ u64 dec_start;
+ u64 to_dec;
+
+ tree = &BTRFS_I(inode)->ordered_tree;
+ spin_lock(&tree->lock);
+ node = tree_search(tree, *file_offset);
+ if (!node) {
+ ret = 1;
+ goto out;
+ }
+
+ entry = rb_entry(node, struct btrfs_ordered_extent, rb_node);
+ if (!offset_in_entry(entry, *file_offset)) {
+ ret = 1;
+ goto out;
+ }
+
+ dec_start = max(*file_offset, entry->file_offset);
+ dec_end = min(*file_offset + io_size, entry->file_offset +
+ entry->len);
+ *file_offset = dec_end;
+ if (dec_start > dec_end) {
+ printk(KERN_CRIT "bad ordering dec_start %llu end %llu\n",
+ (unsigned long long)dec_start,
+ (unsigned long long)dec_end);
+ }
+ to_dec = dec_end - dec_start;
+ if (to_dec > entry->bytes_left) {
+ printk(KERN_CRIT "bad ordered accounting left %llu size %llu\n",
+ (unsigned long long)entry->bytes_left,
+ (unsigned long long)to_dec);
+ }
+ entry->bytes_left -= to_dec;
+ if (entry->bytes_left == 0)
+ ret = test_and_set_bit(BTRFS_ORDERED_IO_DONE, &entry->flags);
+ else
+ ret = 1;
+out:
+ if (!ret && cached && entry) {
+ *cached = entry;
+ atomic_inc(&entry->refs);
+ }
+ spin_unlock(&tree->lock);
+ return ret == 0;
+}
+
/*
* this is used to account for finished IO across a given range
* of the file. The IO should not span ordered extents. If
int btrfs_dec_test_ordered_pending(struct inode *inode,
struct btrfs_ordered_extent **cached,
u64 file_offset, u64 io_size);
+int btrfs_dec_test_first_ordered_pending(struct inode *inode,
+ struct btrfs_ordered_extent **cached,
+ u64 *file_offset, u64 io_size);
int btrfs_add_ordered_extent(struct inode *inode, u64 file_offset,
u64 start, u64 len, u64 disk_len, int type);
int btrfs_add_ordered_extent_dio(struct inode *inode, u64 file_offset,
return -ENOMEM;
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
- if (ret)
+ if (ret < 0)
goto out;
+ if (ret) {
+ ret = -ENOENT;
+ goto out;
+ }
ret = btrfs_del_item(trans, root, path);
case Opt_space_cache:
printk(KERN_INFO "btrfs: enabling disk space caching\n");
btrfs_set_opt(info->mount_opt, SPACE_CACHE);
+ break;
case Opt_clear_cache:
printk(KERN_INFO "btrfs: force clearing of disk cache\n");
btrfs_set_opt(info->mount_opt, CLEAR_CACHE);
static int btrfs_test_super(struct super_block *s, void *data)
{
- struct btrfs_fs_devices *test_fs_devices = data;
+ struct btrfs_root *test_root = data;
struct btrfs_root *root = btrfs_sb(s);
- return root->fs_info->fs_devices == test_fs_devices;
+ /*
+ * If this super block is going away, return false as it
+ * can't match as an existing super block.
+ */
+ if (!atomic_read(&s->s_active))
+ return 0;
+ return root->fs_info->fs_devices == test_root->fs_info->fs_devices;
+}
+
+static int btrfs_set_super(struct super_block *s, void *data)
+{
+ s->s_fs_info = data;
+
+ return set_anon_super(s, data);
}
+
/*
* Find a superblock for the given device / mount point.
*
struct super_block *s;
struct dentry *root;
struct btrfs_fs_devices *fs_devices = NULL;
+ struct btrfs_root *tree_root = NULL;
+ struct btrfs_fs_info *fs_info = NULL;
fmode_t mode = FMODE_READ;
char *subvol_name = NULL;
u64 subvol_objectid = 0;
goto error_close_devices;
}
+ /*
+ * Setup a dummy root and fs_info for test/set super. This is because
+ * we don't actually fill this stuff out until open_ctree, but we need
+ * it for searching for existing supers, so this lets us do that and
+ * then open_ctree will properly initialize everything later.
+ */
+ fs_info = kzalloc(sizeof(struct btrfs_fs_info), GFP_NOFS);
+ tree_root = kzalloc(sizeof(struct btrfs_root), GFP_NOFS);
+ if (!fs_info || !tree_root) {
+ error = -ENOMEM;
+ goto error_close_devices;
+ }
+ fs_info->tree_root = tree_root;
+ fs_info->fs_devices = fs_devices;
+ tree_root->fs_info = fs_info;
+
bdev = fs_devices->latest_bdev;
- s = sget(fs_type, btrfs_test_super, set_anon_super, fs_devices);
+ s = sget(fs_type, btrfs_test_super, btrfs_set_super, tree_root);
if (IS_ERR(s))
goto error_s;
mutex_unlock(&root->d_inode->i_mutex);
if (IS_ERR(new_root)) {
+ dput(root);
deactivate_locked_super(s);
error = PTR_ERR(new_root);
- dput(root);
goto error_free_subvol_name;
}
if (!new_root->d_inode) {
error = PTR_ERR(s);
error_close_devices:
btrfs_close_devices(fs_devices);
+ kfree(fs_info);
+ kfree(tree_root);
error_free_subvol_name:
kfree(subvol_name);
return ERR_PTR(error);
struct btrfs_root *root = pending->root;
struct btrfs_root *parent_root;
struct inode *parent_inode;
+ struct dentry *parent;
struct dentry *dentry;
struct extent_buffer *tmp;
struct extent_buffer *old;
trans->block_rsv = &pending->block_rsv;
dentry = pending->dentry;
- parent_inode = dentry->d_parent->d_inode;
+ parent = dget_parent(dentry);
+ parent_inode = parent->d_inode;
parent_root = BTRFS_I(parent_inode)->root;
record_root_in_trans(trans, parent_root);
parent_inode->i_ino, index,
dentry->d_name.name, dentry->d_name.len);
BUG_ON(ret);
+ dput(parent);
key.offset = (u64)-1;
pending->snap = btrfs_read_fs_root_no_name(root->fs_info, &key);
{
int ret = 0;
struct btrfs_root *root;
+ struct dentry *old_parent = NULL;
/*
* for regular files, if its inode is already on disk, we don't
if (IS_ROOT(parent))
break;
- parent = parent->d_parent;
+ parent = dget_parent(parent);
+ dput(old_parent);
+ old_parent = parent;
inode = parent->d_inode;
}
+ dput(old_parent);
out:
return ret;
}
{
int inode_only = exists_only ? LOG_INODE_EXISTS : LOG_INODE_ALL;
struct super_block *sb;
+ struct dentry *old_parent = NULL;
int ret = 0;
u64 last_committed = root->fs_info->last_trans_committed;
if (IS_ROOT(parent))
break;
- parent = parent->d_parent;
+ parent = dget_parent(parent);
+ dput(old_parent);
+ old_parent = parent;
}
ret = 0;
end_trans:
+ dput(old_parent);
if (ret < 0) {
BUG_ON(ret != -ENOSPC);
root->fs_info->last_trans_log_full_commit = trans->transid;
int btrfs_log_dentry_safe(struct btrfs_trans_handle *trans,
struct btrfs_root *root, struct dentry *dentry)
{
- return btrfs_log_inode_parent(trans, root, dentry->d_inode,
- dentry->d_parent, 0);
+ struct dentry *parent = dget_parent(dentry);
+ int ret;
+
+ ret = btrfs_log_inode_parent(trans, root, dentry->d_inode, parent, 0);
+ dput(parent);
+
+ return ret;
}
/*
device->fs_devices = fs_devices;
fs_devices->num_devices++;
- } else if (strcmp(device->name, path)) {
+ } else if (!device->name || strcmp(device->name, path)) {
name = kstrdup(path, GFP_NOFS);
if (!name)
return -ENOMEM;
kfree(device->name);
device->name = name;
+ if (device->missing) {
+ fs_devices->missing_devices--;
+ device->missing = 0;
+ }
}
if (found_transid > fs_devices->latest_trans) {
device->fs_devices->num_devices--;
+ if (device->missing)
+ root->fs_info->fs_devices->missing_devices--;
+
next_device = list_entry(root->fs_info->fs_devices->devices.next,
struct btrfs_device, dev_list);
if (device->bdev == root->fs_info->sb->s_bdev)
device->devid = devid;
device->work.func = pending_bios_fn;
device->fs_devices = fs_devices;
+ device->missing = 1;
fs_devices->num_devices++;
+ fs_devices->missing_devices++;
spin_lock_init(&device->io_lock);
INIT_LIST_HEAD(&device->dev_alloc_list);
memcpy(device->uuid, dev_uuid, BTRFS_UUID_SIZE);
device = add_missing_dev(root, devid, dev_uuid);
if (!device)
return -ENOMEM;
+ } else if (!device->missing) {
+ /*
+ * this happens when a device that was properly setup
+ * in the device info lists suddenly goes bad.
+ * device->bdev is NULL, and so we have to set
+ * device->missing to one here
+ */
+ root->fs_info->fs_devices->missing_devices++;
+ device->missing = 1;
}
}
int writeable;
int in_fs_metadata;
+ int missing;
spinlock_t io_lock;
u64 num_devices;
u64 open_devices;
u64 rw_devices;
+ u64 missing_devices;
u64 total_rw_bytes;
struct block_device *latest_bdev;
spin_lock(&dcache_lock);
/* start at beginning? */
- if (filp->f_pos == 2 || (last &&
- filp->f_pos < ceph_dentry(last)->offset)) {
+ if (filp->f_pos == 2 || last == NULL ||
+ filp->f_pos < ceph_dentry(last)->offset) {
if (list_empty(&parent->d_subdirs))
goto out_unlock;
p = parent->d_subdirs.prev;
#include <linux/ioctl.h>
#include <linux/types.h>
-#define CEPH_IOCTL_MAGIC 0x98
+#define CEPH_IOCTL_MAGIC 0x97
/* just use u64 to align sanely on all archs */
struct ceph_ioctl_layout {
* Implement fcntl and flock locking functions.
*/
static int ceph_lock_message(u8 lock_type, u16 operation, struct file *file,
- u64 pid, u64 pid_ns,
- int cmd, u64 start, u64 length, u8 wait)
+ int cmd, u8 wait, struct file_lock *fl)
{
struct inode *inode = file->f_dentry->d_inode;
struct ceph_mds_client *mdsc =
ceph_sb_to_client(inode->i_sb)->mdsc;
struct ceph_mds_request *req;
int err;
+ u64 length = 0;
req = ceph_mdsc_create_request(mdsc, operation, USE_AUTH_MDS);
if (IS_ERR(req))
return PTR_ERR(req);
req->r_inode = igrab(inode);
+ /* mds requires start and length rather than start and end */
+ if (LLONG_MAX == fl->fl_end)
+ length = 0;
+ else
+ length = fl->fl_end - fl->fl_start + 1;
+
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
"length: %llu, wait: %d, type`: %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd);
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type);
+
req->r_args.filelock_change.rule = lock_type;
req->r_args.filelock_change.type = cmd;
- req->r_args.filelock_change.pid = cpu_to_le64(pid);
+ req->r_args.filelock_change.pid = cpu_to_le64((u64)fl->fl_pid);
/* This should be adjusted, but I'm not sure if
namespaces actually get id numbers*/
req->r_args.filelock_change.pid_namespace =
- cpu_to_le64((u64)pid_ns);
- req->r_args.filelock_change.start = cpu_to_le64(start);
+ cpu_to_le64((u64)(unsigned long)fl->fl_nspid);
+ req->r_args.filelock_change.start = cpu_to_le64(fl->fl_start);
req->r_args.filelock_change.length = cpu_to_le64(length);
req->r_args.filelock_change.wait = wait;
err = ceph_mdsc_do_request(mdsc, inode, req);
+
+ if ( operation == CEPH_MDS_OP_GETFILELOCK){
+ fl->fl_pid = le64_to_cpu(req->r_reply_info.filelock_reply->pid);
+ if (CEPH_LOCK_SHARED == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_RDLCK;
+ else if (CEPH_LOCK_EXCL == req->r_reply_info.filelock_reply->type)
+ fl->fl_type = F_WRLCK;
+ else
+ fl->fl_type = F_UNLCK;
+
+ fl->fl_start = le64_to_cpu(req->r_reply_info.filelock_reply->start);
+ length = le64_to_cpu(req->r_reply_info.filelock_reply->start) +
+ le64_to_cpu(req->r_reply_info.filelock_reply->length);
+ if (length >= 1)
+ fl->fl_end = length -1;
+ else
+ fl->fl_end = 0;
+
+ }
ceph_mdsc_put_request(req);
dout("ceph_lock_message: rule: %d, op: %d, pid: %llu, start: %llu, "
- "length: %llu, wait: %d, type`: %d err code %d", (int)lock_type,
- (int)operation, pid, start, length, wait, cmd, err);
+ "length: %llu, wait: %d, type`: %d, err code %d", (int)lock_type,
+ (int)operation, (u64)fl->fl_pid, fl->fl_start,
+ length, wait, fl->fl_type, err);
return err;
}
*/
int ceph_lock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 0;
else
lock_cmd = CEPH_LOCK_UNLOCK;
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
-
- err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ err = ceph_lock_message(CEPH_LOCK_FCNTL, op, file, lock_cmd, wait, fl);
if (!err) {
- dout("mds locked, locking locally");
- err = posix_lock_file(file, fl, NULL);
- if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
- /* undo! This should only happen if the kernel detects
- * local deadlock. */
- ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
- (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
- dout("got %d on posix_lock_file, undid lock", err);
+ if ( op != CEPH_MDS_OP_GETFILELOCK ){
+ dout("mds locked, locking locally");
+ err = posix_lock_file(file, fl, NULL);
+ if (err && (CEPH_MDS_OP_SETFILELOCK == op)) {
+ /* undo! This should only happen if the kernel detects
+ * local deadlock. */
+ ceph_lock_message(CEPH_LOCK_FCNTL, op, file,
+ CEPH_LOCK_UNLOCK, 0, fl);
+ dout("got %d on posix_lock_file, undid lock", err);
+ }
}
+
} else {
dout("mds returned error code %d", err);
}
int ceph_flock(struct file *file, int cmd, struct file_lock *fl)
{
- u64 length;
u8 lock_cmd;
int err;
u8 wait = 1;
lock_cmd = CEPH_LOCK_EXCL;
else
lock_cmd = CEPH_LOCK_UNLOCK;
- /* mds requires start and length rather than start and end */
- if (LLONG_MAX == fl->fl_end)
- length = 0;
- else
- length = fl->fl_end - fl->fl_start + 1;
err = ceph_lock_message(CEPH_LOCK_FLOCK, CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- lock_cmd, fl->fl_start,
- length, wait);
+ file, lock_cmd, wait, fl);
if (!err) {
err = flock_lock_file_wait(file, fl);
if (err) {
ceph_lock_message(CEPH_LOCK_FLOCK,
CEPH_MDS_OP_SETFILELOCK,
- file, (u64)fl->fl_pid,
- (u64)(unsigned long)fl->fl_nspid,
- CEPH_LOCK_UNLOCK, fl->fl_start,
- length, 0);
+ file, CEPH_LOCK_UNLOCK, 0, fl);
dout("got %d on flock_lock_file_wait, undid lock", err);
}
} else {
return err;
}
+/*
+ * parse fcntl F_GETLK results
+ */
+static int parse_reply_info_filelock(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (*p + sizeof(*info->filelock_reply) > end)
+ goto bad;
+
+ info->filelock_reply = *p;
+ *p += sizeof(*info->filelock_reply);
+
+ if (unlikely(*p != end))
+ goto bad;
+ return 0;
+
+bad:
+ return -EIO;
+}
+
+/*
+ * parse extra results
+ */
+static int parse_reply_info_extra(void **p, void *end,
+ struct ceph_mds_reply_info_parsed *info)
+{
+ if (info->head->op == CEPH_MDS_OP_GETFILELOCK)
+ return parse_reply_info_filelock(p, end, info);
+ else
+ return parse_reply_info_dir(p, end, info);
+}
+
/*
* parse entire mds reply
*/
goto out_bad;
}
- /* dir content */
+ /* extra */
ceph_decode_32_safe(&p, end, len, bad);
if (len > 0) {
- err = parse_reply_info_dir(&p, p+len, info);
+ err = parse_reply_info_extra(&p, p+len, info);
if (err < 0)
goto out_bad;
}
mutex_lock(&session->s_mutex);
if (err < 0) {
- pr_err("mdsc_handle_reply got corrupt reply mds%d\n", mds);
+ pr_err("mdsc_handle_reply got corrupt reply mds%d(tid:%lld)\n", mds, tid);
ceph_msg_dump(msg);
goto out_err;
}
mutex_lock(&req->r_fill_mutex);
err = ceph_fill_trace(mdsc->fsc->sb, req, req->r_session);
if (err == 0) {
- if (result == 0 && rinfo->dir_nr)
+ if (result == 0 && req->r_op != CEPH_MDS_OP_GETFILELOCK &&
+ rinfo->dir_nr)
ceph_readdir_prepopulate(req, req->r_session);
ceph_unreserve_caps(mdsc, &req->r_caps_reservation);
}
};
/*
- * parsed info about an mds reply, including information about the
- * target inode and/or its parent directory and dentry, and directory
- * contents (for readdir results).
+ * parsed info about an mds reply, including information about
+ * either: 1) the target inode and/or its parent directory and dentry,
+ * and directory contents (for readdir results), or
+ * 2) the file range lock info (for fcntl F_GETLK results).
*/
struct ceph_mds_reply_info_parsed {
struct ceph_mds_reply_head *head;
+ /* trace */
struct ceph_mds_reply_info_in diri, targeti;
struct ceph_mds_reply_dirfrag *dirfrag;
char *dname;
u32 dname_len;
struct ceph_mds_reply_lease *dlease;
- struct ceph_mds_reply_dirfrag *dir_dir;
- int dir_nr;
- char **dir_dname;
- u32 *dir_dname_len;
- struct ceph_mds_reply_lease **dir_dlease;
- struct ceph_mds_reply_info_in *dir_in;
- u8 dir_complete, dir_end;
+ /* extra */
+ union {
+ /* for fcntl F_GETLK results */
+ struct ceph_filelock *filelock_reply;
+
+ /* for readdir results */
+ struct {
+ struct ceph_mds_reply_dirfrag *dir_dir;
+ int dir_nr;
+ char **dir_dname;
+ u32 *dir_dname_len;
+ struct ceph_mds_reply_lease **dir_dlease;
+ struct ceph_mds_reply_info_in *dir_in;
+ u8 dir_complete, dir_end;
+ };
+ };
/* encoded blob describing snapshot contexts for certain
operations (e.g., open) */
select NLS
select CRYPTO
select CRYPTO_MD5
+ select CRYPTO_HMAC
select CRYPTO_ARC4
help
This is the client VFS module for the Common Internet File System
to be cached locally on disk through the general filesystem cache
manager. If unsure, say N.
+config CIFS_ACL
+ bool "Provide CIFS ACL support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && CIFS_XATTR
+ help
+ Allows to fetch CIFS/NTFS ACL from the server. The DACL blob
+ is handed over to the application/caller.
+
config CIFS_EXPERIMENTAL
bool "CIFS Experimental Features (EXPERIMENTAL)"
depends on CIFS && EXPERIMENTAL
cifs-y := cifsfs.o cifssmb.o cifs_debug.o connect.o dir.o file.o inode.o \
link.o misc.o netmisc.o smbdes.o smbencrypt.o transport.o asn1.o \
md4.o md5.o cifs_unicode.o nterr.o xattr.o cifsencrypt.o \
- readdir.o ioctl.o sess.o export.o cifsacl.o
+ readdir.o ioctl.o sess.o export.o
+
+cifs-$(CONFIG_CIFS_ACL) += cifsacl.o
cifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o
wsize default write size (default 57344)
maximum wsize currently allowed by CIFS is 57344 (fourteen
4096 byte pages)
+ actimeo=n attribute cache timeout in seconds (default 1 second).
+ After this timeout, the cifs client requests fresh attribute
+ information from the server. This option allows to tune the
+ attribute cache timeout to suit the workload needs. Shorter
+ timeouts mean better the cache coherency, but increased number
+ of calls to the server. Longer timeouts mean reduced number
+ of calls to the server at the expense of less stricter cache
+ coherency checks (i.e. incorrect attribute cache for a short
+ period of time).
rw mount the network share read-write (note that the
server may still consider the share read-only)
ro mount network share read-only
struct nls_table *local_nls;
unsigned int rsize;
unsigned int wsize;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
atomic_t active;
uid_t mnt_uid;
gid_t mnt_gid;
#include "cifs_debug.h"
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
static struct cifs_wksid wksidarr[NUM_WK_SIDS] = {
{{1, 0, {0, 0, 0, 0, 0, 0}, {0, 0, 0, 0, 0} }, "null user"},
{{1, 1, {0, 0, 0, 0, 0, 1}, {0, 0, 0, 0, 0} }, "nobody"},
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
xid = GetXid();
rc = CIFSSMBGetCIFSACL(xid, tlink_tcon(tlink), fid, &pntsd, pacllen);
cifs_put_tlink(tlink);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
struct tcon_link *tlink = cifs_sb_tlink(cifs_sb);
if (IS_ERR(tlink))
- return NULL;
+ return ERR_CAST(tlink);
tcon = tlink_tcon(tlink);
xid = GetXid();
rc = CIFSSMBOpen(xid, tcon, path, FILE_OPEN, READ_CONTROL, 0,
&fid, &oplock, NULL, cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (rc) {
- cERROR(1, "Unable to open file to get ACL");
- goto out;
+ if (!rc) {
+ rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
+ CIFSSMBClose(xid, tcon, fid);
}
- rc = CIFSSMBGetCIFSACL(xid, tcon, fid, &pntsd, pacllen);
- cFYI(1, "GetCIFSACL rc = %d ACL len %d", rc, *pacllen);
-
- CIFSSMBClose(xid, tcon, fid);
- out:
cifs_put_tlink(tlink);
FreeXid(xid);
+
+ cFYI(1, "%s: rc = %d ACL len %d", __func__, rc, *pacllen);
+ if (rc)
+ return ERR_PTR(rc);
return pntsd;
}
/* Retrieve an ACL from the server */
-static struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
+struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *cifs_sb,
struct inode *inode, const char *path,
u32 *pacllen)
{
}
/* Translate the CIFS ACL (simlar to NTFS ACL) for a file into mode bits */
-void
+int
cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb, struct cifs_fattr *fattr,
struct inode *inode, const char *path, const __u16 *pfid)
{
pntsd = get_cifs_acl(cifs_sb, inode, path, &acllen);
/* if we can retrieve the ACL, now parse Access Control Entries, ACEs */
- if (pntsd)
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
rc = parse_sec_desc(pntsd, acllen, fattr);
- if (rc)
- cFYI(1, "parse sec desc failed rc = %d", rc);
+ kfree(pntsd);
+ if (rc)
+ cERROR(1, "parse sec desc failed rc = %d", rc);
+ }
- kfree(pntsd);
- return;
+ return rc;
}
/* Convert mode bits to an ACL so we can update the ACL on the server */
-int mode_to_acl(struct inode *inode, const char *path, __u64 nmode)
+int mode_to_cifs_acl(struct inode *inode, const char *path, __u64 nmode)
{
int rc = 0;
__u32 secdesclen = 0;
/* Add three ACEs for owner, group, everyone getting rid of
other ACEs as chmod disables ACEs and set the security descriptor */
- if (pntsd) {
+ if (IS_ERR(pntsd)) {
+ rc = PTR_ERR(pntsd);
+ cERROR(1, "%s: error %d getting sec desc", __func__, rc);
+ } else {
/* allocate memory for the smb header,
set security descriptor request security descriptor
parameters, and secuirty descriptor itself */
return rc;
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
char sidname[SIDNAMELENGTH];
} __attribute__((packed));
-#ifdef CONFIG_CIFS_EXPERIMENTAL
-
extern int match_sid(struct cifs_sid *);
extern int compare_sids(const struct cifs_sid *, const struct cifs_sid *);
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
-
#endif /* _CIFSACL_H */
seq_printf(s, ",acl");
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MF_SYMLINKS)
seq_printf(s, ",mfsymlinks");
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE)
+ seq_printf(s, ",fsc");
seq_printf(s, ",rsize=%d", cifs_sb->rsize);
seq_printf(s, ",wsize=%d", cifs_sb->wsize);
+ /* convert actimeo and display it in seconds */
+ seq_printf(s, ",actimeo=%lu", cifs_sb->actimeo / HZ);
return 0;
}
GlobalCurrentXid = 0;
GlobalTotalActiveXid = 0;
GlobalMaxActiveXid = 0;
- memset(Local_System_Name, 0, 15);
spin_lock_init(&cifs_tcp_ses_lock);
spin_lock_init(&cifs_file_list_lock);
spin_lock_init(&GlobalMid_Lock);
#define CIFS_MIN_RCV_POOL 4
+/*
+ * default attribute cache timeout (jiffies)
+ */
+#define CIFS_DEF_ACTIMEO (1 * HZ)
+
+/*
+ * max attribute cache timeout (jiffies) - 2^30
+ */
+#define CIFS_MAX_ACTIMEO (1 << 30)
+
/*
* MAX_REQ is the maximum number of requests that WE will send
* on one socket concurrently. It also matches the most common
GLOBAL_EXTERN unsigned int GlobalMaxActiveXid; /* prot by GlobalMid_Sem */
GLOBAL_EXTERN spinlock_t GlobalMid_Lock; /* protects above & list operations */
/* on midQ entries */
-GLOBAL_EXTERN char Local_System_Name[15];
-
/*
* Global counters, updated atomically
*/
__func__, curr_xid, (int)rc); \
} while (0)
extern char *build_path_from_dentry(struct dentry *);
-extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb);
+extern char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon);
extern char *build_wildcard_path_from_dentry(struct dentry *direntry);
extern char *cifs_compose_mount_options(const char *sb_mountdata,
const char *fullpath, const struct dfs_info3_param *ref,
struct TCP_Server_Info *);
extern bool is_size_safe_to_change(struct cifsInodeInfo *, __u64 eof);
extern struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *, bool);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
extern struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *, bool);
-#endif
extern unsigned int smbCalcSize(struct smb_hdr *ptr);
extern unsigned int smbCalcSize_LE(struct smb_hdr *ptr);
extern int decode_negTokenInit(unsigned char *security_blob, int length,
extern int cifs_get_inode_info_unix(struct inode **pinode,
const unsigned char *search_path,
struct super_block *sb, int xid);
-extern void cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
+extern int cifs_acl_to_fattr(struct cifs_sb_info *cifs_sb,
struct cifs_fattr *fattr, struct inode *inode,
const char *path, const __u16 *pfid);
-extern int mode_to_acl(struct inode *inode, const char *path, __u64);
+extern int mode_to_cifs_acl(struct inode *inode, const char *path, __u64);
+extern struct cifs_ntsd *get_cifs_acl(struct cifs_sb_info *, struct inode *,
+ const char *, u32 *);
extern int cifs_mount(struct super_block *, struct cifs_sb_info *, char *,
const char *);
}
#ifdef CONFIG_CIFS_EXPERIMENTAL
-/* Initialize NT TRANSACT SMB into small smb request buffer.
- This assumes that all NT TRANSACTS that we init here have
- total parm and data under about 400 bytes (to fit in small cifs
- buffer size), which is the case so far, it easily fits. NB:
- Setup words themselves and ByteCount
- MaxSetupCount (size of returned setup area) and
- MaxParameterCount (returned parms size) must be set by caller */
-static int
-smb_init_nttransact(const __u16 sub_command, const int setup_count,
- const int parm_len, struct cifsTconInfo *tcon,
- void **ret_buf)
-{
- int rc;
- __u32 temp_offset;
- struct smb_com_ntransact_req *pSMB;
-
- rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
- (void **)&pSMB);
- if (rc)
- return rc;
- *ret_buf = (void *)pSMB;
- pSMB->Reserved = 0;
- pSMB->TotalParameterCount = cpu_to_le32(parm_len);
- pSMB->TotalDataCount = 0;
- pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
- MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
- pSMB->ParameterCount = pSMB->TotalParameterCount;
- pSMB->DataCount = pSMB->TotalDataCount;
- temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
- (setup_count * 2) - 4 /* for rfc1001 length itself */;
- pSMB->ParameterOffset = cpu_to_le32(temp_offset);
- pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
- pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
- pSMB->SubCommand = cpu_to_le16(sub_command);
- return 0;
-}
-
-static int
-validate_ntransact(char *buf, char **ppparm, char **ppdata,
- __u32 *pparmlen, __u32 *pdatalen)
-{
- char *end_of_smb;
- __u32 data_count, data_offset, parm_count, parm_offset;
- struct smb_com_ntransact_rsp *pSMBr;
-
- *pdatalen = 0;
- *pparmlen = 0;
-
- if (buf == NULL)
- return -EINVAL;
-
- pSMBr = (struct smb_com_ntransact_rsp *)buf;
-
- /* ByteCount was converted from little endian in SendReceive */
- end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
-
- data_offset = le32_to_cpu(pSMBr->DataOffset);
- data_count = le32_to_cpu(pSMBr->DataCount);
- parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
- parm_count = le32_to_cpu(pSMBr->ParameterCount);
-
- *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
- *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
-
- /* should we also check that parm and data areas do not overlap? */
- if (*ppparm > end_of_smb) {
- cFYI(1, "parms start after end of smb");
- return -EINVAL;
- } else if (parm_count + *ppparm > end_of_smb) {
- cFYI(1, "parm end after end of smb");
- return -EINVAL;
- } else if (*ppdata > end_of_smb) {
- cFYI(1, "data starts after end of smb");
- return -EINVAL;
- } else if (data_count + *ppdata > end_of_smb) {
- cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
- *ppdata, data_count, (data_count + *ppdata),
- end_of_smb, pSMBr);
- return -EINVAL;
- } else if (parm_count + data_count > pSMBr->ByteCount) {
- cFYI(1, "parm count and data count larger than SMB");
- return -EINVAL;
- }
- *pdatalen = data_count;
- *pparmlen = parm_count;
- return 0;
-}
-
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName,
#endif /* CONFIG_POSIX */
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
+/*
+ * Initialize NT TRANSACT SMB into small smb request buffer. This assumes that
+ * all NT TRANSACTS that we init here have total parm and data under about 400
+ * bytes (to fit in small cifs buffer size), which is the case so far, it
+ * easily fits. NB: Setup words themselves and ByteCount MaxSetupCount (size of
+ * returned setup area) and MaxParameterCount (returned parms size) must be set
+ * by caller
+ */
+static int
+smb_init_nttransact(const __u16 sub_command, const int setup_count,
+ const int parm_len, struct cifsTconInfo *tcon,
+ void **ret_buf)
+{
+ int rc;
+ __u32 temp_offset;
+ struct smb_com_ntransact_req *pSMB;
+
+ rc = small_smb_init(SMB_COM_NT_TRANSACT, 19 + setup_count, tcon,
+ (void **)&pSMB);
+ if (rc)
+ return rc;
+ *ret_buf = (void *)pSMB;
+ pSMB->Reserved = 0;
+ pSMB->TotalParameterCount = cpu_to_le32(parm_len);
+ pSMB->TotalDataCount = 0;
+ pSMB->MaxDataCount = cpu_to_le32((tcon->ses->server->maxBuf -
+ MAX_CIFS_HDR_SIZE) & 0xFFFFFF00);
+ pSMB->ParameterCount = pSMB->TotalParameterCount;
+ pSMB->DataCount = pSMB->TotalDataCount;
+ temp_offset = offsetof(struct smb_com_ntransact_req, Parms) +
+ (setup_count * 2) - 4 /* for rfc1001 length itself */;
+ pSMB->ParameterOffset = cpu_to_le32(temp_offset);
+ pSMB->DataOffset = cpu_to_le32(temp_offset + parm_len);
+ pSMB->SetupCount = setup_count; /* no need to le convert byte fields */
+ pSMB->SubCommand = cpu_to_le16(sub_command);
+ return 0;
+}
+
+static int
+validate_ntransact(char *buf, char **ppparm, char **ppdata,
+ __u32 *pparmlen, __u32 *pdatalen)
+{
+ char *end_of_smb;
+ __u32 data_count, data_offset, parm_count, parm_offset;
+ struct smb_com_ntransact_rsp *pSMBr;
+
+ *pdatalen = 0;
+ *pparmlen = 0;
+
+ if (buf == NULL)
+ return -EINVAL;
+
+ pSMBr = (struct smb_com_ntransact_rsp *)buf;
+
+ /* ByteCount was converted from little endian in SendReceive */
+ end_of_smb = 2 /* sizeof byte count */ + pSMBr->ByteCount +
+ (char *)&pSMBr->ByteCount;
+
+ data_offset = le32_to_cpu(pSMBr->DataOffset);
+ data_count = le32_to_cpu(pSMBr->DataCount);
+ parm_offset = le32_to_cpu(pSMBr->ParameterOffset);
+ parm_count = le32_to_cpu(pSMBr->ParameterCount);
+
+ *ppparm = (char *)&pSMBr->hdr.Protocol + parm_offset;
+ *ppdata = (char *)&pSMBr->hdr.Protocol + data_offset;
+
+ /* should we also check that parm and data areas do not overlap? */
+ if (*ppparm > end_of_smb) {
+ cFYI(1, "parms start after end of smb");
+ return -EINVAL;
+ } else if (parm_count + *ppparm > end_of_smb) {
+ cFYI(1, "parm end after end of smb");
+ return -EINVAL;
+ } else if (*ppdata > end_of_smb) {
+ cFYI(1, "data starts after end of smb");
+ return -EINVAL;
+ } else if (data_count + *ppdata > end_of_smb) {
+ cFYI(1, "data %p + count %d (%p) past smb end %p start %p",
+ *ppdata, data_count, (data_count + *ppdata),
+ end_of_smb, pSMBr);
+ return -EINVAL;
+ } else if (parm_count + data_count > pSMBr->ByteCount) {
+ cFYI(1, "parm count and data count larger than SMB");
+ return -EINVAL;
+ }
+ *pdatalen = data_count;
+ *pparmlen = parm_count;
+ return 0;
+}
+
/* Get Security Descriptor (by handle) from remote server for a file or dir */
int
CIFSSMBGetCIFSACL(const int xid, struct cifsTconInfo *tcon, __u16 fid,
return (rc);
}
-#endif /* CONFIG_CIFS_EXPERIMENTAL */
+#endif /* CONFIG_CIFS_ACL */
/* Legacy Query Path Information call for lookup to old servers such
as Win9x/WinME */
unsigned int wsize;
bool sockopt_tcp_nodelay:1;
unsigned short int port;
+ unsigned long actimeo; /* attribute cache timeout (jiffies) */
char *prepath;
struct sockaddr_storage srcaddr; /* allow binding to a local IP */
struct nls_table *local_nls;
short int override_gid = -1;
bool uid_specified = false;
bool gid_specified = false;
+ char *nodename = utsname()->nodename;
separator[0] = ',';
separator[1] = 0;
- if (Local_System_Name[0] != 0)
- memcpy(vol->source_rfc1001_name, Local_System_Name, 15);
- else {
- char *nodename = utsname()->nodename;
- int n = strnlen(nodename, 15);
- memset(vol->source_rfc1001_name, 0x20, 15);
- for (i = 0; i < n; i++) {
- /* does not have to be perfect mapping since field is
- informational, only used for servers that do not support
- port 445 and it can be overridden at mount time */
- vol->source_rfc1001_name[i] = toupper(nodename[i]);
- }
- }
+ /*
+ * does not have to be perfect mapping since field is
+ * informational, only used for servers that do not support
+ * port 445 and it can be overridden at mount time
+ */
+ memset(vol->source_rfc1001_name, 0x20, 15);
+ for (i = 0; i < strnlen(nodename, 15); i++)
+ vol->source_rfc1001_name[i] = toupper(nodename[i]);
+
vol->source_rfc1001_name[15] = 0;
/* null target name indicates to use *SMBSERVR default called name
if we end up sending RFC1001 session initialize */
/* default to using server inode numbers where available */
vol->server_ino = 1;
+ vol->actimeo = CIFS_DEF_ACTIMEO;
+
if (!options)
return 1;
printk(KERN_WARNING "CIFS: server net"
"biosname longer than 15 truncated.\n");
}
+ } else if (strnicmp(data, "actimeo", 7) == 0) {
+ if (value && *value) {
+ vol->actimeo = HZ * simple_strtoul(value,
+ &value, 0);
+ if (vol->actimeo > CIFS_MAX_ACTIMEO) {
+ cERROR(1, "CIFS: attribute cache"
+ "timeout too large");
+ return 1;
+ }
+ }
} else if (strnicmp(data, "credentials", 4) == 0) {
/* ignore */
} else if (strnicmp(data, "version", 3) == 0) {
"supported. Instead set "
"/proc/fs/cifs/LookupCacheEnabled to 0\n");
} else if (strnicmp(data, "fsc", 3) == 0) {
+#ifndef CONFIG_CIFS_FSCACHE
+ cERROR(1, "FS-Cache support needs CONFIG_CIFS_FSCACHE"
+ "kernel config option set");
+ return 1;
+#endif
vol->fsc = true;
} else if (strnicmp(data, "mfsymlinks", 10) == 0) {
vol->mfsymlinks = true;
cFYI(1, "file mode: 0x%x dir mode: 0x%x",
cifs_sb->mnt_file_mode, cifs_sb->mnt_dir_mode);
+ cifs_sb->actimeo = pvolume_info->actimeo;
+
if (pvolume_info->noperm)
cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_NO_PERM;
if (pvolume_info->setuids)
/* check if a whole path (including prepath) is not remote */
if (!rc && cifs_sb->prepathlen && tcon) {
/* build_path_to_root works only when we have a valid tcon */
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL) {
rc = -ENOMEM;
goto mount_fail_check;
}
rc = is_path_accessible(xid, tcon, cifs_sb, full_path);
- if (rc != -EREMOTE) {
+ if (rc != 0 && rc != -EREMOTE) {
kfree(full_path);
goto mount_fail_check;
}
/* Search for server name delimiter */
sep = memchr(hostname, '\\', len);
if (sep)
- len = sep - unc;
+ len = sep - hostname;
else
cFYI(1, "%s: probably server name is whole unc: %s",
__func__, unc);
return total_written;
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
struct cifsFileInfo *find_readable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
{
spin_unlock(&cifs_file_list_lock);
return NULL;
}
-#endif
struct cifsFileInfo *find_writable_file(struct cifsInodeInfo *cifs_inode,
bool fsuid_only)
void cifs_oplock_break_put(struct cifsFileInfo *cfile)
{
+ struct super_block *sb = cfile->dentry->d_sb;
+
cifsFileInfo_put(cfile);
- cifs_sb_deactive(cfile->dentry->d_sb);
+ cifs_sb_deactive(sb);
}
const struct address_space_operations cifs_addr_ops = {
* fs/cifs/fscache.c - CIFS filesystem cache interface
*
* Copyright (c) 2010 Novell, Inc.
- * Author(s): Suresh Jayaraman (sjayaraman@suse.de>
+ * Author(s): Suresh Jayaraman <sjayaraman@suse.de>
*
* This library is free software; you can redistribute it and/or modify
* it under the terms of the GNU Lesser General Public License as published
if (cifsi->fscache)
return;
- cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_FSCACHE) {
+ cifsi->fscache = fscache_acquire_cookie(tcon->fscache,
&cifs_fscache_inode_object_def, cifsi);
- cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
+ cFYI(1, "CIFS: got FH cookie (0x%p/0x%p)", tcon->fscache,
cifsi->fscache);
+ }
}
void cifs_fscache_release_inode_cookie(struct inode *inode)
{
if ((filp->f_flags & O_ACCMODE) != O_RDONLY)
cifs_fscache_disable_inode_cookie(inode);
- else {
+ else
cifs_fscache_enable_inode_cookie(inode);
- cFYI(1, "CIFS: fscache inode cookie set");
- }
}
void cifs_fscache_reset_inode_cookie(struct inode *inode)
cFYI(1, "cifs_sfu_type failed: %d", tmprc);
}
-#ifdef CONFIG_CIFS_EXPERIMENTAL
+#ifdef CONFIG_CIFS_ACL
/* fill in 0777 bits from ACL */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- cFYI(1, "Getting mode bits from ACL");
- cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path, pfid);
+ rc = cifs_acl_to_fattr(cifs_sb, &fattr, *pinode, full_path,
+ pfid);
+ if (rc) {
+ cFYI(1, "%s: Getting ACL failed with error: %d",
+ __func__, rc);
+ goto cgii_exit;
+ }
}
-#endif
+#endif /* CONFIG_CIFS_ACL */
/* fill in remaining high mode bits e.g. SUID, VTX */
if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)
.lookup = cifs_lookup,
};
-char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb)
+char *cifs_build_path_to_root(struct cifs_sb_info *cifs_sb,
+ struct cifsTconInfo *tcon)
{
int pplen = cifs_sb->prepathlen;
int dfsplen;
char *full_path = NULL;
- struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
/* if no prefix path, simply set path to the root of share to "" */
if (pplen == 0) {
char *full_path;
struct cifsTconInfo *tcon = cifs_sb_master_tcon(cifs_sb);
- full_path = cifs_build_path_to_root(cifs_sb);
+ full_path = cifs_build_path_to_root(cifs_sb, tcon);
if (full_path == NULL)
return ERR_PTR(-ENOMEM);
rc = cifs_get_inode_info(&inode, full_path, NULL, sb,
xid, NULL);
- if (!inode)
- return ERR_PTR(rc);
+ if (!inode) {
+ inode = ERR_PTR(rc);
+ goto out;
+ }
#ifdef CONFIG_CIFS_FSCACHE
/* populate tcon->resource_id */
inode->i_uid = cifs_sb->mnt_uid;
inode->i_gid = cifs_sb->mnt_gid;
} else if (rc) {
- kfree(full_path);
- _FreeXid(xid);
iget_failed(inode);
- return ERR_PTR(rc);
+ inode = ERR_PTR(rc);
}
-
+out:
kfree(full_path);
/* can not call macro FreeXid here since in a void func
* TODO: This is no longer true
cifs_inode_needs_reval(struct inode *inode)
{
struct cifsInodeInfo *cifs_i = CIFS_I(inode);
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
if (cifs_i->clientCanCacheRead)
return false;
if (cifs_i->time == 0)
return true;
- /* FIXME: the actimeo should be tunable */
- if (time_after_eq(jiffies, cifs_i->time + HZ))
+ if (!time_in_range(jiffies, cifs_i->time,
+ cifs_i->time + cifs_sb->actimeo))
return true;
/* hardlinked files w/ noserverino get "special" treatment */
- if (!(CIFS_SB(inode->i_sb)->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
+ if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM) &&
S_ISREG(inode->i_mode) && inode->i_nlink != 1)
return true;
return false;
}
-/* check invalid_mapping flag and zap the cache if it's set */
+/*
+ * Zap the cache. Called when invalid_mapping flag is set.
+ */
static void
cifs_invalidate_mapping(struct inode *inode)
{
if (attrs->ia_valid & ATTR_MODE) {
rc = 0;
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL)
- rc = mode_to_acl(inode, full_path, mode);
- else
-#endif
+#ifdef CONFIG_CIFS_ACL
+ if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
+ rc = mode_to_cifs_acl(inode, full_path, mode);
+ if (rc) {
+ cFYI(1, "%s: Setting ACL failed with error: %d",
+ __func__, rc);
+ goto cifs_setattr_exit;
+ }
+ } else
+#endif /* CONFIG_CIFS_ACL */
if (((mode & S_IWUGO) == 0) &&
(cifsInode->cifsAttrs & ATTR_READONLY) == 0) {
char *full_path = NULL;
struct cifsFileInfo *cifsFile;
struct cifs_sb_info *cifs_sb = CIFS_SB(file->f_path.dentry->d_sb);
- struct tcon_link *tlink;
+ struct tcon_link *tlink = NULL;
struct cifsTconInfo *pTcon;
- tlink = cifs_sb_tlink(cifs_sb);
- if (IS_ERR(tlink))
- return PTR_ERR(tlink);
- pTcon = tlink_tcon(tlink);
-
- if (file->private_data == NULL)
- file->private_data =
- kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
if (file->private_data == NULL) {
- rc = -ENOMEM;
- goto error_exit;
+ tlink = cifs_sb_tlink(cifs_sb);
+ if (IS_ERR(tlink))
+ return PTR_ERR(tlink);
+
+ cifsFile = kzalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
+ if (cifsFile == NULL) {
+ rc = -ENOMEM;
+ goto error_exit;
+ }
+ file->private_data = cifsFile;
+ cifsFile->tlink = cifs_get_tlink(tlink);
+ pTcon = tlink_tcon(tlink);
+ } else {
+ cifsFile = file->private_data;
+ pTcon = tlink_tcon(cifsFile->tlink);
}
- cifsFile = file->private_data;
cifsFile->invalidHandle = true;
cifsFile->srch_inf.endOfSearch = false;
- cifsFile->tlink = cifs_get_tlink(tlink);
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
rc = filldir(direntry, qstring.name, qstring.len, file->f_pos,
ino, fattr.cf_dtype);
- /*
- * we can not return filldir errors to the caller since they are
- * "normal" when the stat blocksize is too small - we return remapped
- * error instead
- *
- * FIXME: This looks bogus. filldir returns -EOVERFLOW in the above
- * case already. Why should we be clobbering other errors from it?
- */
- if (rc) {
- cFYI(1, "filldir rc = %d", rc);
- rc = -EOVERFLOW;
- }
dput(tmp_dentry);
return rc;
}
#define MAX_EA_VALUE_SIZE 65535
#define CIFS_XATTR_DOS_ATTRIB "user.DosAttrib"
+#define CIFS_XATTR_CIFS_ACL "system.cifs_acl"
#define CIFS_XATTR_USER_PREFIX "user."
#define CIFS_XATTR_SYSTEM_PREFIX "system."
#define CIFS_XATTR_OS2_PREFIX "os2."
-#define CIFS_XATTR_SECURITY_PREFIX ".security"
+#define CIFS_XATTR_SECURITY_PREFIX "security."
#define CIFS_XATTR_TRUSTED_PREFIX "trusted."
#define XATTR_TRUSTED_PREFIX_LEN 8
#define XATTR_SECURITY_PREFIX_LEN 9
cifs_sb->local_nls,
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
-#ifdef CONFIG_CIFS_EXPERIMENTAL
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) {
- __u16 fid;
- int oplock = 0;
- struct cifs_ntsd *pacl = NULL;
- __u32 buflen = 0;
- if (experimEnabled)
- rc = CIFSSMBOpen(xid, pTcon, full_path,
- FILE_OPEN, GENERIC_READ, 0, &fid,
- &oplock, NULL, cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- /* else rc is EOPNOTSUPP from above */
-
- if (rc == 0) {
- rc = CIFSSMBGetCIFSACL(xid, pTcon, fid, &pacl,
- &buflen);
- CIFSSMBClose(xid, pTcon, fid);
- }
- }
-#endif /* EXPERIMENTAL */
#else
- cFYI(1, "query POSIX ACL not supported yet");
+ cFYI(1, "Query POSIX ACL not supported yet");
#endif /* CONFIG_CIFS_POSIX */
} else if (strncmp(ea_name, POSIX_ACL_XATTR_DEFAULT,
strlen(POSIX_ACL_XATTR_DEFAULT)) == 0) {
cifs_sb->mnt_cifs_flags &
CIFS_MOUNT_MAP_SPECIAL_CHR);
#else
- cFYI(1, "query POSIX default ACL not supported yet");
-#endif
+ cFYI(1, "Query POSIX default ACL not supported yet");
+#endif /* CONFIG_CIFS_POSIX */
+ } else if (strncmp(ea_name, CIFS_XATTR_CIFS_ACL,
+ strlen(CIFS_XATTR_CIFS_ACL)) == 0) {
+#ifdef CONFIG_CIFS_ACL
+ u32 acllen;
+ struct cifs_ntsd *pacl;
+
+ pacl = get_cifs_acl(cifs_sb, direntry->d_inode,
+ full_path, &acllen);
+ if (IS_ERR(pacl)) {
+ rc = PTR_ERR(pacl);
+ cERROR(1, "%s: error %zd getting sec desc",
+ __func__, rc);
+ } else {
+ if (ea_value) {
+ if (acllen > buf_size)
+ acllen = -ERANGE;
+ else
+ memcpy(ea_value, pacl, acllen);
+ }
+ rc = acllen;
+ kfree(pacl);
+ }
+#else
+ cFYI(1, "Query CIFS ACL not supported yet");
+#endif /* CONFIG_CIFS_ACL */
} else if (strncmp(ea_name,
CIFS_XATTR_TRUSTED_PREFIX, XATTR_TRUSTED_PREFIX_LEN) == 0) {
cFYI(1, "Trusted xattr namespace not supported yet");
argv++;
if (i++ >= max)
return -E2BIG;
+
+ if (fatal_signal_pending(current))
+ return -ERESTARTNOHAND;
+ cond_resched();
}
}
return i;
while (len > 0) {
int offset, bytes_to_copy;
+ if (fatal_signal_pending(current)) {
+ ret = -ERESTARTNOHAND;
+ goto out;
+ }
+ cond_resched();
+
offset = pos % PAGE_SIZE;
if (offset == 0)
offset = PAGE_SIZE;
if (!kmapped_page || kpos != (pos & PAGE_MASK)) {
struct page *page;
-#ifdef CONFIG_STACK_GROWSUP
- ret = expand_stack_downwards(bprm->vma, pos);
- if (ret < 0) {
- /* We've exceed the stack rlimit. */
- ret = -E2BIG;
- goto out;
- }
-#endif
- ret = get_user_pages(current, bprm->mm, pos,
- 1, 1, 1, &page, NULL);
- if (ret <= 0) {
- /* We've exceed the stack rlimit. */
+ page = get_arg_page(bprm, pos, 1);
+ if (!page) {
ret = -E2BIG;
goto out;
}
return retval;
out:
- if (bprm->mm)
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
#ifdef CONFIG_MMU
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+ struct mm_struct *mm = current->mm;
+ long diff = (long)(pages - bprm->vma_pages);
+
+ if (!mm || !diff)
+ return;
+
+ bprm->vma_pages = pages;
+
+#ifdef SPLIT_RSS_COUNTING
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+#else
+ spin_lock(&mm->page_table_lock);
+ add_mm_counter(mm, MM_ANONPAGES, diff);
+ spin_unlock(&mm->page_table_lock);
+#endif
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
unsigned long size = bprm->vma->vm_end - bprm->vma->vm_start;
struct rlimit *rlim;
+ acct_arg_size(bprm, size / PAGE_SIZE);
+
/*
* We've historically supported up to 32 pages (ARG_MAX)
* of argument strings even with small stacks
vma->vm_flags = VM_STACK_FLAGS | VM_STACK_INCOMPLETE_SETUP;
vma->vm_page_prot = vm_get_page_prot(vma->vm_flags);
INIT_LIST_HEAD(&vma->anon_vma_chain);
+
+ err = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (err)
+ goto err;
+
err = insert_vm_struct(mm, vma);
if (err)
goto err;
#else
-static struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+void acct_arg_size(struct linux_binprm *bprm, unsigned long pages)
+{
+}
+
+struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
int write)
{
struct page *page;
/*
* Release all of the old mmap stuff
*/
+ acct_arg_size(bprm, 0);
retval = exec_mmap(bprm->mm);
if (retval)
goto out;
return retval;
out:
- if (bprm->mm)
- mmput (bprm->mm);
+ if (bprm->mm) {
+ acct_arg_size(bprm, 0);
+ mmput(bprm->mm);
+ }
out_file:
if (bprm->file) {
#define EXT4_MOUNT_JOURNAL_CHECKSUM 0x800000 /* Journal checksums */
#define EXT4_MOUNT_JOURNAL_ASYNC_COMMIT 0x1000000 /* Journal Async Commit */
#define EXT4_MOUNT_I_VERSION 0x2000000 /* i_version support */
+#define EXT4_MOUNT_MBLK_IO_SUBMIT 0x4000000 /* multi-block io submits */
#define EXT4_MOUNT_DELALLOC 0x8000000 /* Delalloc support */
#define EXT4_MOUNT_DATA_ERR_ABORT 0x10000000 /* Abort on file data write */
#define EXT4_MOUNT_BLOCK_VALIDITY 0x20000000 /* Block validity checking */
*/
if (unlikely(journal_data && PageChecked(page)))
err = __ext4_journalled_writepage(page, len);
- else
+ else if (test_opt(inode->i_sb, MBLK_IO_SUBMIT))
err = ext4_bio_write_page(&io_submit, page,
len, mpd->wbc);
+ else
+ err = block_write_full_page(page,
+ noalloc_get_block_write, mpd->wbc);
if (!err)
mpd->pages_written++;
if (namelen > EXT4_NAME_LEN)
return NULL;
if ((namelen <= 2) && (name[0] == '.') &&
- (name[1] == '.' || name[1] == '0')) {
+ (name[1] == '.' || name[1] == '\0')) {
/*
* "." or ".." will only be in the first block
* NFS may look up ".."; "." should be handled by the VFS
!(def_mount_opts & EXT4_DEFM_NODELALLOC))
seq_puts(seq, ",nodelalloc");
+ if (test_opt(sb, MBLK_IO_SUBMIT))
+ seq_puts(seq, ",mblk_io_submit");
if (sbi->s_stripe)
seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
/*
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_jqfmt_vfsv1, Opt_quota,
Opt_noquota, Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err,
Opt_resize, Opt_usrquota, Opt_grpquota, Opt_i_version,
- Opt_stripe, Opt_delalloc, Opt_nodelalloc,
- Opt_block_validity, Opt_noblock_validity,
+ Opt_stripe, Opt_delalloc, Opt_nodelalloc, Opt_mblk_io_submit,
+ Opt_nomblk_io_submit, Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio,
Opt_dioread_nolock, Opt_dioread_lock,
Opt_discard, Opt_nodiscard,
{Opt_resize, "resize"},
{Opt_delalloc, "delalloc"},
{Opt_nodelalloc, "nodelalloc"},
+ {Opt_mblk_io_submit, "mblk_io_submit"},
+ {Opt_nomblk_io_submit, "nomblk_io_submit"},
{Opt_block_validity, "block_validity"},
{Opt_noblock_validity, "noblock_validity"},
{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
case Opt_nodelalloc:
clear_opt(sbi->s_mount_opt, DELALLOC);
break;
+ case Opt_mblk_io_submit:
+ set_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
+ case Opt_nomblk_io_submit:
+ clear_opt(sbi->s_mount_opt, MBLK_IO_SUBMIT);
+ break;
case Opt_stripe:
if (match_int(&args[0], &option))
return 0;
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/module.h>
+#include <linux/compat.h>
static const struct file_operations fuse_direct_io_file_operations;
return 0;
}
+/*
+ * CUSE servers compiled on 32bit broke on 64bit kernels because the
+ * ABI was defined to be 'struct iovec' which is different on 32bit
+ * and 64bit. Fortunately we can determine which structure the server
+ * used from the size of the reply.
+ */
+static int fuse_copy_ioctl_iovec(struct iovec *dst, void *src,
+ size_t transferred, unsigned count,
+ bool is_compat)
+{
+#ifdef CONFIG_COMPAT
+ if (count * sizeof(struct compat_iovec) == transferred) {
+ struct compat_iovec *ciov = src;
+ unsigned i;
+
+ /*
+ * With this interface a 32bit server cannot support
+ * non-compat (i.e. ones coming from 64bit apps) ioctl
+ * requests
+ */
+ if (!is_compat)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ dst[i].iov_base = compat_ptr(ciov[i].iov_base);
+ dst[i].iov_len = ciov[i].iov_len;
+ }
+ return 0;
+ }
+#endif
+
+ if (count * sizeof(struct iovec) != transferred)
+ return -EIO;
+
+ memcpy(dst, src, transferred);
+ return 0;
+}
+
+/* Make sure iov_length() won't overflow */
+static int fuse_verify_ioctl_iov(struct iovec *iov, size_t count)
+{
+ size_t n;
+ u32 max = FUSE_MAX_PAGES_PER_REQ << PAGE_SHIFT;
+
+ for (n = 0; n < count; n++) {
+ if (iov->iov_len > (size_t) max)
+ return -ENOMEM;
+ max -= iov->iov_len;
+ }
+ return 0;
+}
+
/*
* For ioctls, there is no generic way to determine how much memory
* needs to be read and/or written. Furthermore, ioctls are allowed
in_iovs + out_iovs > FUSE_IOCTL_MAX_IOV)
goto out;
- err = -EIO;
- if ((in_iovs + out_iovs) * sizeof(struct iovec) != transferred)
- goto out;
-
- /* okay, copy in iovs and retry */
vaddr = kmap_atomic(pages[0], KM_USER0);
- memcpy(page_address(iov_page), vaddr, transferred);
+ err = fuse_copy_ioctl_iovec(page_address(iov_page), vaddr,
+ transferred, in_iovs + out_iovs,
+ (flags & FUSE_IOCTL_COMPAT) != 0);
kunmap_atomic(vaddr, KM_USER0);
+ if (err)
+ goto out;
in_iov = page_address(iov_page);
out_iov = in_iov + in_iovs;
+ err = fuse_verify_ioctl_iov(in_iov, in_iovs);
+ if (err)
+ goto out;
+
+ err = fuse_verify_ioctl_iov(out_iov, out_iovs);
+ if (err)
+ goto out;
+
goto retry;
}
struct fs_disk_quota *fdq)
{
struct inode *inode = &ip->i_inode;
+ struct gfs2_sbd *sdp = GFS2_SB(inode);
struct address_space *mapping = inode->i_mapping;
unsigned long index = loc >> PAGE_CACHE_SHIFT;
unsigned offset = loc & (PAGE_CACHE_SIZE - 1);
qd->qd_qb.qb_value = qp->qu_value;
if (fdq) {
if (fdq->d_fieldmask & FS_DQ_BSOFT) {
- qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit);
+ qp->qu_warn = cpu_to_be64(fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift);
qd->qd_qb.qb_warn = qp->qu_warn;
}
if (fdq->d_fieldmask & FS_DQ_BHARD) {
- qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit);
+ qp->qu_limit = cpu_to_be64(fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift);
qd->qd_qb.qb_limit = qp->qu_limit;
}
}
fdq->d_version = FS_DQUOT_VERSION;
fdq->d_flags = (type == QUOTA_USER) ? FS_USER_QUOTA : FS_GROUP_QUOTA;
fdq->d_id = id;
- fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit);
- fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn);
- fdq->d_bcount = be64_to_cpu(qlvb->qb_value);
+ fdq->d_blk_hardlimit = be64_to_cpu(qlvb->qb_limit) << sdp->sd_fsb2bb_shift;
+ fdq->d_blk_softlimit = be64_to_cpu(qlvb->qb_warn) << sdp->sd_fsb2bb_shift;
+ fdq->d_bcount = be64_to_cpu(qlvb->qb_value) << sdp->sd_fsb2bb_shift;
gfs2_glock_dq_uninit(&q_gh);
out:
/* If nothing has changed, this is a no-op */
if ((fdq->d_fieldmask & FS_DQ_BSOFT) &&
- (fdq->d_blk_softlimit == be64_to_cpu(qd->qd_qb.qb_warn)))
+ ((fdq->d_blk_softlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_warn)))
fdq->d_fieldmask ^= FS_DQ_BSOFT;
if ((fdq->d_fieldmask & FS_DQ_BHARD) &&
- (fdq->d_blk_hardlimit == be64_to_cpu(qd->qd_qb.qb_limit)))
+ ((fdq->d_blk_hardlimit >> sdp->sd_fsb2bb_shift) == be64_to_cpu(qd->qd_qb.qb_limit)))
fdq->d_fieldmask ^= FS_DQ_BHARD;
if (fdq->d_fieldmask == 0)
goto out_i;
if (!(open_flag & O_CREAT))
mode = 0;
+ /* Must never be set by userspace */
+ open_flag &= ~FMODE_NONOTIFY;
+
/*
* O_SYNC is implemented as __O_SYNC|O_DSYNC. As many places only
* check for O_DSYNC if the need any syncing at all we enforce it's
struct inode *, struct dentry *);
static int nfs_fsync_dir(struct file *, int);
static loff_t nfs_llseek_dir(struct file *, loff_t, int);
-static int nfs_readdir_clear_array(struct page*, gfp_t);
+static void nfs_readdir_clear_array(struct page*);
const struct file_operations nfs_dir_operations = {
.llseek = nfs_llseek_dir,
.setattr = nfs_setattr,
};
-const struct address_space_operations nfs_dir_addr_space_ops = {
- .releasepage = nfs_readdir_clear_array,
+const struct address_space_operations nfs_dir_aops = {
+ .freepage = nfs_readdir_clear_array,
};
#ifdef CONFIG_NFS_V3
struct page *page;
unsigned long page_index;
u64 *dir_cookie;
+ u64 last_cookie;
loff_t current_index;
decode_dirent_t decode;
* we are freeing strings created by nfs_add_to_readdir_array()
*/
static
-int nfs_readdir_clear_array(struct page *page, gfp_t mask)
+void nfs_readdir_clear_array(struct page *page)
{
- struct nfs_cache_array *array = nfs_readdir_get_array(page);
+ struct nfs_cache_array *array;
int i;
- if (IS_ERR(array))
- return PTR_ERR(array);
+ array = kmap_atomic(page, KM_USER0);
for (i = 0; i < array->size; i++)
kfree(array->array[i].string.name);
- nfs_readdir_release_array(page);
- return 0;
+ kunmap_atomic(array, KM_USER0);
}
/*
goto out;
array->last_cookie = entry->cookie;
array->size++;
- if (entry->eof == 1)
+ if (entry->eof != 0)
array->eof_index = array->size;
out:
nfs_readdir_release_array(page);
for (i = 0; i < array->size; i++) {
if (array->array[i].cookie == *desc->dir_cookie) {
desc->cache_entry_index = i;
- status = 0;
- goto out;
+ return 0;
}
}
- if (i == array->eof_index) {
- desc->eof = 1;
+ if (array->eof_index >= 0) {
status = -EBADCOOKIE;
+ if (*desc->dir_cookie == array->last_cookie)
+ desc->eof = 1;
}
-out:
return status;
}
int nfs_readdir_search_array(nfs_readdir_descriptor_t *desc)
{
struct nfs_cache_array *array;
- int status = -EBADCOOKIE;
-
- if (desc->dir_cookie == NULL)
- goto out;
+ int status;
array = nfs_readdir_get_array(desc->page);
if (IS_ERR(array)) {
else
status = nfs_readdir_search_for_cookie(array, desc);
+ if (status == -EAGAIN) {
+ desc->last_cookie = array->last_cookie;
+ desc->page_index++;
+ }
nfs_readdir_release_array(desc->page);
out:
return status;
static
int nfs_same_file(struct dentry *dentry, struct nfs_entry *entry)
{
- struct nfs_inode *node;
if (dentry->d_inode == NULL)
goto different;
- node = NFS_I(dentry->d_inode);
- if (node->fh.size != entry->fh->size)
- goto different;
- if (strncmp(node->fh.data, entry->fh->data, node->fh.size) != 0)
+ if (nfs_compare_fh(entry->fh, NFS_FH(dentry->d_inode)) != 0)
goto different;
return 1;
different:
count++;
- if (desc->plus == 1)
+ if (desc->plus != 0)
nfs_prime_dcache(desc->file->f_path.dentry, entry);
status = nfs_readdir_add_to_array(entry, page);
break;
} while (!entry->eof);
- if (count == 0 || (status == -EBADCOOKIE && entry->eof == 1)) {
+ if (count == 0 || (status == -EBADCOOKIE && entry->eof != 0)) {
array = nfs_readdir_get_array(page);
if (!IS_ERR(array)) {
array->eof_index = array->size;
unsigned int array_size = ARRAY_SIZE(pages);
entry.prev_cookie = 0;
- entry.cookie = *desc->dir_cookie;
+ entry.cookie = desc->last_cookie;
entry.eof = 0;
entry.fh = nfs_alloc_fhandle();
entry.fattr = nfs_alloc_fattr();
static
void cache_page_release(nfs_readdir_descriptor_t *desc)
{
+ if (!desc->page->mapping)
+ nfs_readdir_clear_array(desc->page);
page_cache_release(desc->page);
desc->page = NULL;
}
return PTR_ERR(desc->page);
res = nfs_readdir_search_array(desc);
- if (res == 0)
- return 0;
- cache_page_release(desc);
+ if (res != 0)
+ cache_page_release(desc);
return res;
}
{
int res;
- if (desc->page_index == 0)
+ if (desc->page_index == 0) {
desc->current_index = 0;
- while (1) {
- res = find_cache_page(desc);
- if (res != -EAGAIN)
- break;
- desc->page_index++;
+ desc->last_cookie = 0;
}
+ do {
+ res = find_cache_page(desc);
+ } while (res == -EAGAIN);
return res;
}
-static inline unsigned int dt_type(struct inode *inode)
-{
- return (inode->i_mode >> 12) & 15;
-}
-
/*
* Once we've found the start of the dirent within a page: fill 'er up...
*/
break;
}
file->f_pos++;
- desc->cache_entry_index = i;
if (i < (array->size-1))
*desc->dir_cookie = array->array[i+1].cookie;
else
*desc->dir_cookie = array->last_cookie;
}
- if (i == array->eof_index)
+ if (array->eof_index >= 0)
desc->eof = 1;
nfs_readdir_release_array(desc->page);
}
desc->page_index = 0;
+ desc->last_cookie = *desc->dir_cookie;
desc->page = page;
status = nfs_readdir_xdr_to_array(desc, page, inode);
struct inode *inode = dentry->d_inode;
nfs_readdir_descriptor_t my_desc,
*desc = &my_desc;
- int res = -ENOMEM;
+ int res;
dfprintk(FILE, "NFS: readdir(%s/%s) starting at cookie %llu\n",
dentry->d_parent->d_name.name, dentry->d_name.name,
if (res < 0)
goto out;
- while (desc->eof != 1) {
+ do {
res = readdir_search_pagecache(desc);
if (res == -EBADCOOKIE) {
res = nfs_do_filldir(desc, dirent, filldir);
if (res < 0)
break;
- }
+ } while (!desc->eof);
out:
nfs_unblock_sillyrename(dentry);
if (res > 0)
{
struct inode *inode = filp->f_mapping->host;
int status = 0;
+ unsigned int saved_type = fl->fl_type;
/* Try local locking first */
posix_test_lock(filp, fl);
/* found a conflict */
goto out;
}
+ fl->fl_type = saved_type;
if (nfs_have_delegation(inode, FMODE_READ))
goto out_noconflict;
} else if (S_ISDIR(inode->i_mode)) {
inode->i_op = NFS_SB(sb)->nfs_client->rpc_ops->dir_inode_ops;
inode->i_fop = &nfs_dir_operations;
+ inode->i_data.a_ops = &nfs_dir_aops;
if (nfs_server_capable(inode, NFS_CAP_READDIRPLUS))
set_bit(NFS_INO_ADVISE_RDPLUS, &NFS_I(inode)->flags);
/* Deal with crossing mountpoints */
static struct rpc_version mnt_version1 = {
.number = 1,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt_procedures),
.procs = mnt_procedures,
};
static struct rpc_version mnt_version3 = {
.number = 3,
- .nrprocs = 2,
+ .nrprocs = ARRAY_SIZE(mnt3_procedures),
.procs = mnt3_procedures,
};
ret = nfs_revalidate_inode(server, inode);
if (ret < 0)
return ret;
+ if (NFS_I(inode)->cache_validity & NFS_INO_INVALID_ACL)
+ nfs_zap_acl_cache(inode);
ret = nfs4_read_cached_acl(inode, buf, buflen);
if (ret != -ENOENT)
return ret;
nfs_inode_return_delegation(inode);
buf_to_pages(buf, buflen, arg.acl_pages, &arg.acl_pgbase);
ret = nfs4_call_sync(server, &msg, &arg, &res, 1);
+ /*
+ * Acl update can result in inode attribute update.
+ * so mark the attribute cache invalid.
+ */
+ spin_lock(&inode->i_lock);
+ NFS_I(inode)->cache_validity |= NFS_INO_INVALID_ATTR;
+ spin_unlock(&inode->i_lock);
nfs_access_zap_cache(inode);
nfs_zap_acl_cache(inode);
return ret;
{
if (!nfs_lock_request_dontget(req))
return 0;
- if (req->wb_page != NULL)
+ if (test_bit(PG_MAPPED, &req->wb_flags))
radix_tree_tag_set(&NFS_I(req->wb_context->path.dentry->d_inode)->nfs_page_tree, req->wb_index, NFS_PAGE_TAG_LOCKED);
return 1;
}
*/
void nfs_clear_page_tag_locked(struct nfs_page *req)
{
- if (req->wb_page != NULL) {
+ if (test_bit(PG_MAPPED, &req->wb_flags)) {
struct inode *inode = req->wb_context->path.dentry->d_inode;
struct nfs_inode *nfsi = NFS_I(inode);
(long long)NFS_FILEID(req->wb_context->path.dentry->d_inode),
req->wb_bytes,
(long long)req_offset(req));
- nfs_clear_request(req);
nfs_release_request(req);
}
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case Opt_v4:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
case Opt_udp:
mnt->flags &= ~NFS_MOUNT_TCP;
mnt->nfs_server.protocol = XPRT_TRANSPORT_UDP;
mnt->flags |= NFS_MOUNT_VER3;
mnt->version = 3;
break;
-#ifdef CONFIG_NFS_V4
case NFS4_VERSION:
mnt->flags &= ~NFS_MOUNT_VER3;
mnt->version = 4;
break;
-#endif
default:
goto out_invalid_value;
}
if (nfs_have_delegation(inode, FMODE_WRITE))
nfsi->change_attr++;
}
+ set_bit(PG_MAPPED, &req->wb_flags);
SetPagePrivate(req->wb_page);
set_page_private(req->wb_page, (unsigned long)req);
nfsi->npages++;
spin_lock(&inode->i_lock);
set_page_private(req->wb_page, 0);
ClearPagePrivate(req->wb_page);
+ clear_bit(PG_MAPPED, &req->wb_flags);
radix_tree_delete(&nfsi->nfs_page_tree, req->wb_index);
nfsi->npages--;
if (!nfsi->npages) {
iput(inode);
} else
spin_unlock(&inode->i_lock);
- nfs_clear_request(req);
nfs_release_request(req);
}
err = vfs_getattr(fhp->fh_export->ex_path.mnt, fhp->fh_dentry,
&fhp->fh_post_attr);
fhp->fh_post_change = fhp->fh_dentry->d_inode->i_version;
- if (err)
+ if (err) {
fhp->fh_post_saved = 0;
- else
+ /* Grab the ctime anyway - set_change_info might use it */
+ fhp->fh_post_attr.ctime = fhp->fh_dentry->d_inode->i_ctime;
+ } else
fhp->fh_post_saved = 1;
}
static inline void
set_change_info(struct nfsd4_change_info *cinfo, struct svc_fh *fhp)
{
- BUG_ON(!fhp->fh_pre_saved || !fhp->fh_post_saved);
- cinfo->atomic = 1;
+ BUG_ON(!fhp->fh_pre_saved);
+ cinfo->atomic = fhp->fh_post_saved;
cinfo->change_supported = IS_I_VERSION(fhp->fh_dentry->d_inode);
- if (cinfo->change_supported) {
- cinfo->before_change = fhp->fh_pre_change;
- cinfo->after_change = fhp->fh_post_change;
- } else {
- cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
- cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
- cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
- cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
- }
+
+ cinfo->before_change = fhp->fh_pre_change;
+ cinfo->after_change = fhp->fh_post_change;
+ cinfo->before_ctime_sec = fhp->fh_pre_ctime.tv_sec;
+ cinfo->before_ctime_nsec = fhp->fh_pre_ctime.tv_nsec;
+ cinfo->after_ctime_sec = fhp->fh_post_attr.ctime.tv_sec;
+ cinfo->after_ctime_nsec = fhp->fh_post_attr.ctime.tv_nsec;
+
}
int nfs4svc_encode_voidres(struct svc_rqst *, __be32 *, void *);
int nilfs_init_gcinode(struct inode *inode)
{
struct nilfs_inode_info *ii = NILFS_I(inode);
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
inode->i_mode = S_IFREG;
mapping_set_gfp_mask(inode->i_mapping, GFP_NOFS);
ii->i_flags = 0;
nilfs_bmap_init_gc(ii->i_bmap);
- /*
- * Add the inode to GC inode list. Garbage Collection
- * is serialized and no two processes manipulate the
- * list simultaneously.
- */
- igrab(inode);
- list_add(&NILFS_I(inode)->i_dirty, &nilfs->ns_gc_inodes);
-
return 0;
}
struct nilfs_argv *argv, void *buf)
{
size_t nmembs = argv->v_nmembs;
+ struct the_nilfs *nilfs = NILFS_SB(sb)->s_nilfs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
ret = PTR_ERR(inode);
goto failed;
}
+ if (list_empty(&NILFS_I(inode)->i_dirty)) {
+ /*
+ * Add the inode to GC inode list. Garbage Collection
+ * is serialized and no two processes manipulate the
+ * list simultaneously.
+ */
+ igrab(inode);
+ list_add(&NILFS_I(inode)->i_dirty,
+ &nilfs->ns_gc_inodes);
+ }
+
do {
ret = nilfs_ioctl_move_inode_block(inode, vdesc,
&buffers);
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- wait_event(group->fanotify_data.access_waitq, event->response);
+ wait_event(group->fanotify_data.access_waitq, event->response ||
+ atomic_read(&group->fanotify_data.bypass_perm));
+
+ if (!event->response) /* bypass_perm set */
+ return 0;
/* userspace responded, convert to something usable */
spin_lock(&event->lock);
return client_fd;
}
-static ssize_t fill_event_metadata(struct fsnotify_group *group,
+static int fill_event_metadata(struct fsnotify_group *group,
struct fanotify_event_metadata *metadata,
struct fsnotify_event *event)
{
+ int ret = 0;
+
pr_debug("%s: group=%p metadata=%p event=%p\n", __func__,
group, metadata, event);
metadata->event_len = FAN_EVENT_METADATA_LEN;
+ metadata->metadata_len = FAN_EVENT_METADATA_LEN;
metadata->vers = FANOTIFY_METADATA_VERSION;
metadata->mask = event->mask & FAN_ALL_OUTGOING_EVENTS;
metadata->pid = pid_vnr(event->tgid);
- metadata->fd = create_fd(group, event);
+ if (unlikely(event->mask & FAN_Q_OVERFLOW))
+ metadata->fd = FAN_NOFD;
+ else {
+ metadata->fd = create_fd(group, event);
+ if (metadata->fd < 0)
+ ret = metadata->fd;
+ }
- return metadata->fd;
+ return ret;
}
#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
mutex_lock(&group->fanotify_data.access_mutex);
- if (group->fanotify_data.bypass_perm) {
+ if (atomic_read(&group->fanotify_data.bypass_perm)) {
mutex_unlock(&group->fanotify_data.access_mutex);
kmem_cache_free(fanotify_response_event_cache, re);
event->response = FAN_ALLOW;
pr_debug("%s: group=%p event=%p\n", __func__, group, event);
- fd = fill_event_metadata(group, &fanotify_event_metadata, event);
- if (fd < 0)
- return fd;
+ ret = fill_event_metadata(group, &fanotify_event_metadata, event);
+ if (ret < 0)
+ goto out;
+ fd = fanotify_event_metadata.fd;
ret = prepare_for_access_response(group, event, fd);
if (ret)
goto out_close_fd;
ret = -EFAULT;
- if (copy_to_user(buf, &fanotify_event_metadata, FAN_EVENT_METADATA_LEN))
+ if (copy_to_user(buf, &fanotify_event_metadata,
+ fanotify_event_metadata.event_len))
goto out_kill_access_response;
- return FAN_EVENT_METADATA_LEN;
+ return fanotify_event_metadata.event_len;
out_kill_access_response:
remove_access_response(group, event, fd);
out_close_fd:
- sys_close(fd);
+ if (fd != FAN_NOFD)
+ sys_close(fd);
+out:
+#ifdef CONFIG_FANOTIFY_ACCESS_PERMISSIONS
+ if (event->mask & FAN_ALL_PERM_EVENTS) {
+ event->response = FAN_DENY;
+ wake_up(&group->fanotify_data.access_waitq);
+ }
+#endif
return ret;
}
mutex_lock(&group->fanotify_data.access_mutex);
- group->fanotify_data.bypass_perm = true;
+ atomic_inc(&group->fanotify_data.bypass_perm);
list_for_each_entry_safe(re, lre, &group->fanotify_data.access_list, list) {
pr_debug("%s: found group=%p re=%p event=%p\n", __func__, group,
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
fsn_mark = fsnotify_find_vfsmount_mark(group, mnt);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, NULL, mnt, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~mnt->mnt_fsnotify_mask)
fsnotify_recalc_vfsmount_mask(mnt);
-
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
static int fanotify_add_inode_mark(struct fsnotify_group *group,
{
struct fsnotify_mark *fsn_mark;
__u32 added;
+ int ret = 0;
pr_debug("%s: group=%p inode=%p\n", __func__, group, inode);
fsn_mark = fsnotify_find_inode_mark(group, inode);
if (!fsn_mark) {
- int ret;
-
if (atomic_read(&group->num_marks) > group->fanotify_data.max_marks)
return -ENOSPC;
fsnotify_init_mark(fsn_mark, fanotify_free_mark);
ret = fsnotify_add_mark(fsn_mark, group, inode, NULL, 0);
- if (ret) {
- fanotify_free_mark(fsn_mark);
- return ret;
- }
+ if (ret)
+ goto err;
}
added = fanotify_mark_add_to_mask(fsn_mark, mask, flags);
- fsnotify_put_mark(fsn_mark);
+
if (added & ~inode->i_fsnotify_mask)
fsnotify_recalc_inode_mask(inode);
- return 0;
+err:
+ fsnotify_put_mark(fsn_mark);
+ return ret;
}
/* fanotify syscalls */
/* fsnotify_alloc_group takes a ref. Dropped in fanotify_release */
group = fsnotify_alloc_group(&fanotify_fsnotify_ops);
- if (IS_ERR(group))
+ if (IS_ERR(group)) {
+ free_uid(user);
return PTR_ERR(group);
+ }
group->fanotify_data.user = user;
atomic_inc(&user->fanotify_listeners);
mutex_init(&group->fanotify_data.access_mutex);
init_waitqueue_head(&group->fanotify_data.access_waitq);
INIT_LIST_HEAD(&group->fanotify_data.access_list);
+ atomic_set(&group->fanotify_data.bypass_perm, 0);
#endif
switch (flags & FAN_ALL_CLASS_BITS) {
case FAN_CLASS_NOTIF:
if (flags & ~FAN_ALL_MARK_FLAGS)
return -EINVAL;
switch (flags & (FAN_MARK_ADD | FAN_MARK_REMOVE | FAN_MARK_FLUSH)) {
- case FAN_MARK_ADD:
+ case FAN_MARK_ADD: /* fallthrough */
case FAN_MARK_REMOVE:
+ if (!mask)
+ return -EINVAL;
case FAN_MARK_FLUSH:
break;
default:
if (ret >= 0)
return ret;
+ fsnotify_put_group(group);
atomic_dec(&user->inotify_devs);
out_free_uid:
free_uid(user);
if (reg == NULL)
return ERR_PTR(-ENOMEM);
- if (strlen(name) > O2HB_MAX_REGION_NAME_LEN)
- return ERR_PTR(-ENAMETOOLONG);
+ if (strlen(name) > O2HB_MAX_REGION_NAME_LEN) {
+ ret = -ENAMETOOLONG;
+ goto free;
+ }
spin_lock(&o2hb_live_lock);
reg->hr_region_num = 0;
O2NM_MAX_REGIONS);
if (reg->hr_region_num >= O2NM_MAX_REGIONS) {
spin_unlock(&o2hb_live_lock);
- return ERR_PTR(-EFBIG);
+ ret = -EFBIG;
+ goto free;
}
set_bit(reg->hr_region_num, o2hb_region_bitmap);
}
ret = o2hb_debug_region_init(reg, o2hb_debug_dir);
if (ret) {
config_item_put(®->hr_item);
- return ERR_PTR(ret);
+ goto free;
}
return ®->hr_item;
+free:
+ kfree(reg);
+ return ERR_PTR(ret);
}
static void o2hb_heartbeat_group_drop_item(struct config_group *group,
out:
iput(inode);
- ocfs2_dentry_attach_gen(dentry);
}
/*
r += O2HB_MAX_REGION_NAME_LEN;
}
- local = kmalloc(sizeof(qr->qr_regions), GFP_KERNEL);
+ local = kmalloc(sizeof(qr->qr_regions), GFP_ATOMIC);
if (!local) {
status = -ENOMEM;
goto bail;
char l_name[OCFS2_LOCK_ID_MAX_LEN];
unsigned int l_ro_holders;
unsigned int l_ex_holders;
- char l_level;
- char l_requested;
- char l_blocking;
+ signed char l_level;
+ signed char l_requested;
+ signed char l_blocking;
/* Data packed - type enum ocfs2_lock_type */
unsigned char l_type;
return c;
}
- return c;
+ return NULL;
}
/*
return ret;
}
+/*
+ * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
+ * location, so checking ->i_pipe is not enough to verify that this is a
+ * pipe.
+ */
+struct pipe_inode_info *get_pipe_info(struct file *file)
+{
+ struct inode *i = file->f_path.dentry->d_inode;
+
+ return S_ISFIFO(i->i_mode) ? i->i_pipe : NULL;
+}
+
long pipe_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
{
struct pipe_inode_info *pipe;
long ret;
- pipe = file->f_path.dentry->d_inode->i_pipe;
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
if (!tmp)
return -ENOMEM;
- pathname = d_path_with_unreachable(path, tmp, PAGE_SIZE);
+ pathname = d_path(path, tmp, PAGE_SIZE);
len = PTR_ERR(pathname);
if (IS_ERR(pathname))
goto out;
struct reiserfs_transaction_handle th;
size_t size = reiserfs_xattr_nblocks(inode,
reiserfs_acl_size(clone->a_count));
- reiserfs_write_lock(inode->i_sb);
+ int depth;
+
+ depth = reiserfs_write_lock_once(inode->i_sb);
error = journal_begin(&th, inode->i_sb, size * 2);
if (!error) {
int error2;
if (error2)
error = error2;
}
- reiserfs_write_unlock(inode->i_sb);
+ reiserfs_write_unlock_once(inode->i_sb, depth);
}
posix_acl_release(clone);
return error;
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
size_t len, unsigned int flags);
-/*
- * After the inode slimming patch, i_pipe/i_bdev/i_cdev share the same
- * location, so checking ->i_pipe is not enough to verify that this is a
- * pipe.
- */
-static inline struct pipe_inode_info *pipe_info(struct inode *inode)
-{
- if (S_ISFIFO(inode->i_mode))
- return inode->i_pipe;
-
- return NULL;
-}
/*
* Determine where to splice to/from.
loff_t offset, *off;
long ret;
- ipipe = pipe_info(in->f_path.dentry->d_inode);
- opipe = pipe_info(out->f_path.dentry->d_inode);
+ ipipe = get_pipe_info(in);
+ opipe = get_pipe_info(out);
if (ipipe && opipe) {
if (off_in || off_out)
int error;
long ret;
- pipe = pipe_info(file->f_path.dentry->d_inode);
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
};
long ret;
- pipe = pipe_info(file->f_path.dentry->d_inode);
+ pipe = get_pipe_info(file);
if (!pipe)
return -EBADF;
static long do_tee(struct file *in, struct file *out, size_t len,
unsigned int flags)
{
- struct pipe_inode_info *ipipe = pipe_info(in->f_path.dentry->d_inode);
- struct pipe_inode_info *opipe = pipe_info(out->f_path.dentry->d_inode);
+ struct pipe_inode_info *ipipe = get_pipe_info(in);
+ struct pipe_inode_info *opipe = get_pipe_info(out);
int ret = -EINVAL;
/*
struct xfs_inode *ip = XFS_I(inode);
struct buffer_head *bh, *head;
loff_t offset = page_offset(page);
- ssize_t len = 1 << inode->i_blkbits;
if (!xfs_is_delayed_page(page, IO_DELAY))
goto out_invalidate;
xfs_ilock(ip, XFS_ILOCK_EXCL);
bh = head = page_buffers(page);
do {
- int done;
- xfs_fileoff_t offset_fsb;
- xfs_bmbt_irec_t imap;
- int nimaps = 1;
int error;
- xfs_fsblock_t firstblock;
- xfs_bmap_free_t flist;
+ xfs_fileoff_t start_fsb;
if (!buffer_delay(bh))
goto next_buffer;
- offset_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
-
- /*
- * Map the range first and check that it is a delalloc extent
- * before trying to unmap the range. Otherwise we will be
- * trying to remove a real extent (which requires a
- * transaction) or a hole, which is probably a bad idea...
- */
- error = xfs_bmapi(NULL, ip, offset_fsb, 1,
- XFS_BMAPI_ENTIRE, NULL, 0, &imap,
- &nimaps, NULL);
-
- if (error) {
- /* something screwed, just bail */
- if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
- xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
- "page discard failed delalloc mapping lookup.");
- }
- break;
- }
- if (!nimaps) {
- /* nothing there */
- goto next_buffer;
- }
- if (imap.br_startblock != DELAYSTARTBLOCK) {
- /* been converted, ignore */
- goto next_buffer;
- }
- WARN_ON(imap.br_blockcount == 0);
-
- /*
- * Note: while we initialise the firstblock/flist pair, they
- * should never be used because blocks should never be
- * allocated or freed for a delalloc extent and hence we need
- * don't cancel or finish them after the xfs_bunmapi() call.
- */
- xfs_bmap_init(&flist, &firstblock);
- error = xfs_bunmapi(NULL, ip, offset_fsb, 1, 0, 1, &firstblock,
- &flist, &done);
-
- ASSERT(!flist.xbf_count && !flist.xbf_first);
+ start_fsb = XFS_B_TO_FSBT(ip->i_mount, offset);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb, 1);
if (error) {
/* something screwed, just bail */
if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
break;
}
next_buffer:
- offset += len;
+ offset += 1 << inode->i_blkbits;
} while ((bh = bh->b_this_page) != head);
struct inode *inode = mapping->host;
if (to > inode->i_size) {
- struct iattr ia = {
- .ia_valid = ATTR_SIZE | ATTR_FORCE,
- .ia_size = inode->i_size,
- };
- xfs_setattr(XFS_I(inode), &ia, XFS_ATTR_NOLOCK);
+ /*
+ * punch out the delalloc blocks we have already allocated. We
+ * don't call xfs_setattr() to do this as we may be in the
+ * middle of a multi-iovec write and so the vfs inode->i_size
+ * will not match the xfs ip->i_size and so it will zero too
+ * much. Hence we jus truncate the page cache to zero what is
+ * necessary and punch the delalloc blocks directly.
+ */
+ struct xfs_inode *ip = XFS_I(inode);
+ xfs_fileoff_t start_fsb;
+ xfs_fileoff_t end_fsb;
+ int error;
+
+ truncate_pagecache(inode, to, inode->i_size);
+
+ /*
+ * Check if there are any blocks that are outside of i_size
+ * that need to be trimmed back.
+ */
+ start_fsb = XFS_B_TO_FSB(ip->i_mount, inode->i_size) + 1;
+ end_fsb = XFS_B_TO_FSB(ip->i_mount, to);
+ if (end_fsb <= start_fsb)
+ return;
+
+ xfs_ilock(ip, XFS_ILOCK_EXCL);
+ error = xfs_bmap_punch_delalloc_range(ip, start_fsb,
+ end_fsb - start_fsb);
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "xfs_vm_write_failed: unable to clean up ino %lld",
+ ip->i_ino);
+ }
+ }
+ xfs_iunlock(ip, XFS_ILOCK_EXCL);
}
}
spin_unlock(&pag->pag_buf_lock);
xfs_perag_put(pag);
- /* Attempt to get the semaphore without sleeping,
- * if this does not work then we need to drop the
- * spinlock and do a hard attempt on the semaphore.
- */
- if (down_trylock(&bp->b_sema)) {
+ if (xfs_buf_cond_lock(bp)) {
+ /* failed, so wait for the lock if requested. */
if (!(flags & XBF_TRYLOCK)) {
- /* wait for buffer ownership */
xfs_buf_lock(bp);
XFS_STATS_INC(xb_get_locked_waited);
} else {
- /* We asked for a trylock and failed, no need
- * to look at file offset and length here, we
- * know that this buffer at least overlaps our
- * buffer and is locked, therefore our buffer
- * either does not exist, or is this buffer.
- */
xfs_buf_rele(bp);
XFS_STATS_INC(xb_busy_locked);
return NULL;
}
- } else {
- /* trylock worked */
- XB_SET_OWNER(bp);
}
if (bp->b_flags & XBF_STALE) {
*/
/*
- * Locks a buffer object, if it is not already locked.
- * Note that this in no way locks the underlying pages, so it is only
- * useful for synchronizing concurrent use of buffer objects, not for
- * synchronizing independent access to the underlying pages.
+ * Locks a buffer object, if it is not already locked. Note that this in
+ * no way locks the underlying pages, so it is only useful for
+ * synchronizing concurrent use of buffer objects, not for synchronizing
+ * independent access to the underlying pages.
+ *
+ * If we come across a stale, pinned, locked buffer, we know that we are
+ * being asked to lock a buffer that has been reallocated. Because it is
+ * pinned, we know that the log has not been pushed to disk and hence it
+ * will still be locked. Rather than continuing to have trylock attempts
+ * fail until someone else pushes the log, push it ourselves before
+ * returning. This means that the xfsaild will not get stuck trying
+ * to push on stale inode buffers.
*/
int
xfs_buf_cond_lock(
locked = down_trylock(&bp->b_sema) == 0;
if (locked)
XB_SET_OWNER(bp);
+ else if (atomic_read(&bp->b_pin_count) && (bp->b_flags & XBF_STALE))
+ xfs_log_force(bp->b_target->bt_mount, 0);
trace_xfs_buf_cond_lock(bp, _RET_IP_);
return locked ? 0 : -EBUSY;
if (error)
goto out_unlock_iolock;
}
-
- ASSERT(ip->i_delayed_blks == 0);
+ /*
+ * even after flushing the inode, there can still be delalloc
+ * blocks on the inode beyond EOF due to speculative
+ * preallocation. These are not removed until the release
+ * function is called or the inode is inactivated. Hence we
+ * cannot assert here that ip->i_delayed_blks == 0.
+ */
}
lock = xfs_ilock_map_shared(ip);
*count += xfs_bmbt_disk_get_blockcount(frp);
}
}
+
+/*
+ * dead simple method of punching delalyed allocation blocks from a range in
+ * the inode. Walks a block at a time so will be slow, but is only executed in
+ * rare error cases so the overhead is not critical. This will alays punch out
+ * both the start and end blocks, even if the ranges only partially overlap
+ * them, so it is up to the caller to ensure that partial blocks are not
+ * passed in.
+ */
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length)
+{
+ xfs_fileoff_t remaining = length;
+ int error = 0;
+
+ ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
+
+ do {
+ int done;
+ xfs_bmbt_irec_t imap;
+ int nimaps = 1;
+ xfs_fsblock_t firstblock;
+ xfs_bmap_free_t flist;
+
+ /*
+ * Map the range first and check that it is a delalloc extent
+ * before trying to unmap the range. Otherwise we will be
+ * trying to remove a real extent (which requires a
+ * transaction) or a hole, which is probably a bad idea...
+ */
+ error = xfs_bmapi(NULL, ip, start_fsb, 1,
+ XFS_BMAPI_ENTIRE, NULL, 0, &imap,
+ &nimaps, NULL);
+
+ if (error) {
+ /* something screwed, just bail */
+ if (!XFS_FORCED_SHUTDOWN(ip->i_mount)) {
+ xfs_fs_cmn_err(CE_ALERT, ip->i_mount,
+ "Failed delalloc mapping lookup ino %lld fsb %lld.",
+ ip->i_ino, start_fsb);
+ }
+ break;
+ }
+ if (!nimaps) {
+ /* nothing there */
+ goto next_block;
+ }
+ if (imap.br_startblock != DELAYSTARTBLOCK) {
+ /* been converted, ignore */
+ goto next_block;
+ }
+ WARN_ON(imap.br_blockcount == 0);
+
+ /*
+ * Note: while we initialise the firstblock/flist pair, they
+ * should never be used because blocks should never be
+ * allocated or freed for a delalloc extent and hence we need
+ * don't cancel or finish them after the xfs_bunmapi() call.
+ */
+ xfs_bmap_init(&flist, &firstblock);
+ error = xfs_bunmapi(NULL, ip, start_fsb, 1, 0, 1, &firstblock,
+ &flist, &done);
+ if (error)
+ break;
+
+ ASSERT(!flist.xbf_count && !flist.xbf_first);
+next_block:
+ start_fsb++;
+ remaining--;
+ } while(remaining > 0);
+
+ return error;
+}
int whichfork,
int *count);
+int
+xfs_bmap_punch_delalloc_range(
+ struct xfs_inode *ip,
+ xfs_fileoff_t start_fsb,
+ xfs_fileoff_t length);
#endif /* __KERNEL__ */
#endif /* __XFS_BMAP_H__ */
ip->i_d.di_format = tip->i_d.di_format;
tip->i_d.di_format = tmp;
+ /*
+ * The extents in the source inode could still contain speculative
+ * preallocation beyond EOF (e.g. the file is open but not modified
+ * while defrag is in progress). In that case, we need to copy over the
+ * number of delalloc blocks the data fork in the source inode is
+ * tracking beyond EOF so that when the fork is truncated away when the
+ * temporary inode is unlinked we don't underrun the i_delayed_blks
+ * counter on that inode.
+ */
+ ASSERT(tip->i_delayed_blks == 0);
+ tip->i_delayed_blks = ip->i_delayed_blks;
+ ip->i_delayed_blks = 0;
+
ilf_fields = XFS_ILOG_CORE;
switch(ip->i_d.di_format) {
int xfs_etest[XFS_NUM_INJECT_ERROR];
int64_t xfs_etest_fsid[XFS_NUM_INJECT_ERROR];
char * xfs_etest_fsname[XFS_NUM_INJECT_ERROR];
+int xfs_error_test_active;
int
xfs_error_test(int error_tag, int *fsidp, char *expression,
len = strlen(mp->m_fsname);
xfs_etest_fsname[i] = kmem_alloc(len + 1, KM_SLEEP);
strcpy(xfs_etest_fsname[i], mp->m_fsname);
+ xfs_error_test_active++;
return 0;
}
}
xfs_etest_fsid[i] = 0LL;
kmem_free(xfs_etest_fsname[i]);
xfs_etest_fsname[i] = NULL;
+ xfs_error_test_active--;
}
}
#define XFS_RANDOM_BMAPIFORMAT XFS_RANDOM_DEFAULT
#ifdef DEBUG
+extern int xfs_error_test_active;
extern int xfs_error_test(int, int *, char *, int, char *, unsigned long);
#define XFS_NUM_INJECT_ERROR 10
#define XFS_TEST_ERROR(expr, mp, tag, rf) \
- ((expr) || \
+ ((expr) || (xfs_error_test_active && \
xfs_error_test((tag), (mp)->m_fixedfsid, "expr", __LINE__, __FILE__, \
- (rf)))
+ (rf))))
extern int xfs_errortag_add(int error_tag, xfs_mount_t *mp);
extern int xfs_errortag_clearall(xfs_mount_t *mp, int loud);
}
/*
- * This is called to find out where the oldest active copy of the
- * inode log item in the on disk log resides now that the last log
- * write of it completed at the given lsn. Since we always re-log
- * all dirty data in an inode, the latest copy in the on disk log
- * is the only one that matters. Therefore, simply return the
- * given lsn.
+ * This is called to find out where the oldest active copy of the inode log
+ * item in the on disk log resides now that the last log write of it completed
+ * at the given lsn. Since we always re-log all dirty data in an inode, the
+ * latest copy in the on disk log is the only one that matters. Therefore,
+ * simply return the given lsn.
+ *
+ * If the inode has been marked stale because the cluster is being freed, we
+ * don't want to (re-)insert this inode into the AIL. There is a race condition
+ * where the cluster buffer may be unpinned before the inode is inserted into
+ * the AIL during transaction committed processing. If the buffer is unpinned
+ * before the inode item has been committed and inserted, then it is possible
+ * for the buffer to be written and IO completions before the inode is inserted
+ * into the AIL. In that case, we'd be inserting a clean, stale inode into the
+ * AIL which will never get removed. It will, however, get reclaimed which
+ * triggers an assert in xfs_inode_free() complaining about freein an inode
+ * still in the AIL.
+ *
+ * To avoid this, return a lower LSN than the one passed in so that the
+ * transaction committed code will not move the inode forward in the AIL but
+ * will still unpin it properly.
*/
STATIC xfs_lsn_t
xfs_inode_item_committed(
struct xfs_log_item *lip,
xfs_lsn_t lsn)
{
+ struct xfs_inode_log_item *iip = INODE_ITEM(lip);
+ struct xfs_inode *ip = iip->ili_inode;
+
+ if (xfs_iflags_test(ip, XFS_ISTALE))
+ return lsn - 1;
return lsn;
}
* it and some incremental backup programs won't work without it.
*/
xfs_trans_ichgtime(tp, src_ip, XFS_ICHGTIME_CHG);
+ xfs_trans_log_inode(tp, src_ip, XFS_ILOG_CORE);
/*
* Adjust the link count on src_dp. This is necessary when
#ifndef __ACPI_VIDEO_H
#define __ACPI_VIDEO_H
+#include <linux/errno.h> /* for ENODEV */
+
+struct acpi_device;
+
#define ACPI_VIDEO_DISPLAY_CRT 1
#define ACPI_VIDEO_DISPLAY_TV 2
#define ACPI_VIDEO_DISPLAY_DVI 3
#endif
#endif
-
#define I915_PARAM_HAS_EXECBUF2 9
#define I915_PARAM_HAS_BSD 10
#define I915_PARAM_HAS_BLT 11
+#define I915_PARAM_HAS_RELAXED_FENCING 12
+#define I915_PARAM_HAS_COHERENT_RINGS 13
typedef struct drm_i915_getparam {
int param;
extern int acpi_blacklisted(void);
extern void acpi_dmi_osi_linux(int enable, const struct dmi_system_id *d);
-extern int acpi_osi_setup(char *str);
+extern void acpi_osi_setup(char *str);
#ifdef CONFIG_ACPI_NUMA
int acpi_get_pxm(acpi_handle handle);
#define ATM_SKB(skb) (((struct atm_skb_data *) (skb)->cb))
-struct atm_dev *atm_dev_register(const char *type,const struct atmdev_ops *ops,
- int number,unsigned long *flags); /* number == -1: pick first available */
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops,
+ int number, /* -1 == pick first available */
+ unsigned long *flags);
struct atm_dev *atm_dev_lookup(int number);
void atm_dev_deregister(struct atm_dev *dev);
char buf[BINPRM_BUF_SIZE];
#ifdef CONFIG_MMU
struct vm_area_struct *vma;
+ unsigned long vma_pages;
#else
# define MAX_ARG_PAGES 32
struct page *page[MAX_ARG_PAGES];
unsigned long loader, exec;
};
+extern void acct_arg_size(struct linux_binprm *bprm, unsigned long pages);
+extern struct page *get_arg_page(struct linux_binprm *bprm, unsigned long pos,
+ int write);
+
#define BINPRM_FLAGS_ENFORCE_NONDUMP_BIT 0
#define BINPRM_FLAGS_ENFORCE_NONDUMP (1 << BINPRM_FLAGS_ENFORCE_NONDUMP_BIT)
#define alloc_bootmem(x) \
__alloc_bootmem(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
+#define alloc_bootmem_align(x, align) \
+ __alloc_bootmem(x, align, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_nopanic(x) \
__alloc_bootmem_nopanic(x, SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS))
#define alloc_bootmem_pages(x) \
*
* 2) this code must not be preempted for a duration longer than the
* 32-bit counter half period minus the longest period between two
- * calls to this code.
+ * calls to this code;
*
* Those requirements ensure proper update to the state bit in memory.
* This is usually not a problem in practice, but if it is then a kernel
* timer should be scheduled to manage for this code to be executed often
* enough.
*
+ * And finally:
+ *
+ * 3) the cnt_lo argument must be seen as a globally incrementing value,
+ * meaning that it should be a direct reference to the counter data which
+ * can be evaluated according to a specific ordering within the macro,
+ * and not the result of a previous evaluation stored in a variable.
+ *
+ * For example, this is wrong:
+ *
+ * u32 partial = get_hw_count();
+ * u64 full = cnt32_to_63(partial);
+ * return full;
+ *
+ * This is fine:
+ *
+ * u64 full = cnt32_to_63(get_hw_count());
+ * return full;
+ *
* Note that the top bit (bit 63) in the returned value should be considered
* as garbage. It is not cleared here because callers are likely to use a
* multiplier on the returned value which can get rid of the top bit
*
* CPUs are exported via sysfs in the class/cpu/devices/
* directory.
- *
- * Per-cpu interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_CPU_H_
#define _LINUX_CPU_H_
FAN_ALL_PERM_EVENTS |\
FAN_Q_OVERFLOW)
-#define FANOTIFY_METADATA_VERSION 2
+#define FANOTIFY_METADATA_VERSION 3
struct fanotify_event_metadata {
__u32 event_len;
- __u32 vers;
+ __u8 vers;
+ __u8 reserved;
+ __u16 metadata_len;
__aligned_u64 mask;
__s32 fd;
__s32 pid;
struct fanotify_response {
__s32 fd;
__u32 response;
-} __attribute__ ((packed));
+};
/* Legit userspace responses to a _PERM event */
#define FAN_ALLOW 0x01
#define FAN_DENY 0x02
+/* No fd set in event */
+#define FAN_NOFD -1
/* Helper functions to deal with fanotify_event_metadata buffers */
#define FAN_EVENT_METADATA_LEN (sizeof(struct fanotify_event_metadata))
sector_t (*bmap)(struct address_space *, sector_t);
void (*invalidatepage) (struct page *, unsigned long);
int (*releasepage) (struct page *, gfp_t);
+ void (*freepage)(struct page *);
ssize_t (*direct_IO)(int, struct kiocb *, const struct iovec *iov,
loff_t offset, unsigned long nr_segs);
int (*get_xip_mem)(struct address_space *, pgoff_t, int,
if (S_ISDIR(inode->i_mode))
mask |= FS_ISDIR;
- /* FMODE_NONOTIFY must never be set from user */
- file->f_mode &= ~FMODE_NONOTIFY;
-
fsnotify_parent(path, NULL, mask);
fsnotify(inode, mask, path, FSNOTIFY_EVENT_PATH, NULL, 0);
}
struct mutex access_mutex;
struct list_head access_list;
wait_queue_head_t access_waitq;
- bool bypass_perm; /* protected by access_mutex */
+ atomic_t bypass_perm;
#endif /* CONFIG_FANOTIFY_ACCESS_PERMISSIONS */
int f_flags;
unsigned int max_marks;
extern gfp_t gfp_allowed_mask;
-extern void set_gfp_allowed_mask(gfp_t mask);
-extern gfp_t clear_gfp_allowed_mask(gfp_t mask);
+extern void pm_restrict_gfp_mask(void);
+extern void pm_restore_gfp_mask(void);
#endif /* __LINUX_GFP_H */
struct gpio_keys_platform_data {
struct gpio_keys_button *buttons;
int nbuttons;
+ unsigned int poll_interval; /* polling interval in msecs -
+ for polling driver only */
unsigned int rep:1; /* enable input subsystem auto repeat */
int (*enable)(struct device *dev);
void (*disable)(struct device *dev);
__u16 version;
};
+/**
+ * struct input_absinfo - used by EVIOCGABS/EVIOCSABS ioctls
+ * @value: latest reported value for the axis.
+ * @minimum: specifies minimum value for the axis.
+ * @maximum: specifies maximum value for the axis.
+ * @fuzz: specifies fuzz value that is used to filter noise from
+ * the event stream.
+ * @flat: values that are within this value will be discarded by
+ * joydev interface and reported as 0 instead.
+ * @resolution: specifies resolution for the values reported for
+ * the axis.
+ *
+ * Note that input core does not clamp reported values to the
+ * [minimum, maximum] limits, such task is left to userspace.
+ *
+ * Resolution for main axes (ABS_X, ABS_Y, ABS_Z) is reported in
+ * units per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ */
struct input_absinfo {
__s32 value;
__s32 minimum;
#define EVIOCGREP _IOR('E', 0x03, unsigned int[2]) /* get repeat settings */
#define EVIOCSREP _IOW('E', 0x03, unsigned int[2]) /* set repeat settings */
-#define EVIOCGKEYCODE _IOR('E', 0x04, struct input_keymap_entry) /* get keycode */
-#define EVIOCSKEYCODE _IOW('E', 0x04, struct input_keymap_entry) /* set keycode */
+#define EVIOCGKEYCODE _IOR('E', 0x04, unsigned int[2]) /* get keycode */
+#define EVIOCGKEYCODE_V2 _IOR('E', 0x04, struct input_keymap_entry)
+#define EVIOCSKEYCODE _IOW('E', 0x04, unsigned int[2]) /* set keycode */
+#define EVIOCSKEYCODE_V2 _IOW('E', 0x04, struct input_keymap_entry)
#define EVIOCGNAME(len) _IOC(_IOC_READ, 'E', 0x06, len) /* get device name */
#define EVIOCGPHYS(len) _IOC(_IOC_READ, 'E', 0x07, len) /* get physical location */
#define KEY_CAMERA_FOCUS 0x210
#define KEY_WPS_BUTTON 0x211 /* WiFi Protected Setup key */
+#define KEY_TOUCHPAD_TOGGLE 0x212 /* Request switch touchpad on or off */
+#define KEY_TOUCHPAD_ON 0x213
+#define KEY_TOUCHPAD_OFF 0x214
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
* of tracked contacts
* @mtsize: number of MT slots the device uses
* @slot: MT slot currently being transmitted
- * @absinfo: array of &struct absinfo elements holding information
+ * @absinfo: array of &struct input_absinfo elements holding information
* about absolute axes (current value, min, max, flat, fuzz,
* resolution)
* @key: reflects current state of device's keys/buttons
/* PC/ISA/whatever - the normal PC address spaces: IO and memory */
extern struct resource ioport_resource;
extern struct resource iomem_resource;
-extern int resource_alloc_from_bottom;
extern struct resource *request_resource_conflict(struct resource *root, struct resource *new);
extern int request_resource(struct resource *root, struct resource *new);
extern struct resource *insert_resource_conflict(struct resource *parent, struct resource *new);
extern int insert_resource(struct resource *parent, struct resource *new);
extern void insert_resource_expand_to_fit(struct resource *root, struct resource *new);
+extern void arch_remove_reservations(struct resource *avail);
extern int allocate_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
resource_size_t max, resource_size_t align,
extern void put_page_bootmem(struct page *page);
#endif
+void lock_memory_hotplug(void);
+void unlock_memory_hotplug(void);
+
#else /* ! CONFIG_MEMORY_HOTPLUG */
/*
* Stub functions for when hotplug is off
{
}
+static inline void lock_memory_hotplug(void) {}
+static inline void unlock_memory_hotplug(void) {}
+
#endif /* ! CONFIG_MEMORY_HOTPLUG */
#ifdef CONFIG_MEMORY_HOTREMOVE
#define WM8994_CONFIGURE_GPIO 0x8000
#define WM8994_DRC_REGS 5
-#define WM8994_EQ_REGS 19
+#define WM8994_EQ_REGS 20
/**
* DRC configurations are specified with a label and a set of register
#endif /* CONFIG_NFS_V3 */
extern const struct file_operations nfs_file_operations;
extern const struct address_space_operations nfs_file_aops;
+extern const struct address_space_operations nfs_dir_aops;
static inline struct nfs_open_context *nfs_file_open_context(struct file *filp)
{
*/
enum {
PG_BUSY = 0,
+ PG_MAPPED,
PG_CLEAN,
PG_NEED_COMMIT,
PG_NEED_RESCHED,
*
* Nodes are exported via driverfs in the class/node/devices/
* directory.
- *
- * Per-node interfaces can be implemented using a struct device_interface.
- * See the following for how to do this:
- * - drivers/base/intf.c
- * - Documentation/driver-model/interface.txt
*/
#ifndef _LINUX_NODE_H_
#define _LINUX_NODE_H_
#define PCI_DEVICE_ID_AFAVLAB_P030 0x2182
#define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150
+#define PCI_VENDOR_ID_BCM_GVC 0x14a4
#define PCI_VENDOR_ID_BROADCOM 0x14e4
#define PCI_DEVICE_ID_TIGON3_5752 0x1600
#define PCI_DEVICE_ID_TIGON3_5752M 0x1601
int nr_active;
int is_active;
int nr_stat;
+ int rotate_disable;
atomic_t refcount;
struct task_struct *task;
int exclusive;
struct list_head rotation_list;
int jiffies_interval;
+ struct pmu *active_pmu;
};
struct perf_output_handle {
extern const char *perf_pmu_name(void);
extern void __perf_event_task_sched_in(struct task_struct *task);
extern void __perf_event_task_sched_out(struct task_struct *task, struct task_struct *next);
-
-extern atomic_t perf_task_events;
-
-static inline void perf_event_task_sched_in(struct task_struct *task)
-{
- COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
-}
-
-static inline
-void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
-{
- COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
-}
-
extern int perf_event_init_task(struct task_struct *child);
extern void perf_event_exit_task(struct task_struct *child);
extern void perf_event_free_task(struct task_struct *task);
__perf_sw_event(event_id, nr, nmi, regs, addr);
}
+extern atomic_t perf_task_events;
+
+static inline void perf_event_task_sched_in(struct task_struct *task)
+{
+ COND_STMT(&perf_task_events, __perf_event_task_sched_in(task));
+}
+
+static inline
+void perf_event_task_sched_out(struct task_struct *task, struct task_struct *next)
+{
+ perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
+
+ COND_STMT(&perf_task_events, __perf_event_task_sched_out(task, next));
+}
+
extern void perf_event_mmap(struct vm_area_struct *vma);
extern struct perf_guest_info_callbacks *perf_guest_cbs;
extern int perf_register_guest_info_callbacks(struct perf_guest_info_callbacks *callbacks);
/* for F_SETPIPE_SZ and F_GETPIPE_SZ */
long pipe_fcntl(struct file *, unsigned int, unsigned long arg);
+struct pipe_inode_info *get_pipe_info(struct file *file);
#endif
static inline bool pm_runtime_suspended(struct device *dev)
{
- return dev->power.runtime_status == RPM_SUSPENDED;
+ return dev->power.runtime_status == RPM_SUSPENDED
+ && !dev->power.disable_depth;
}
static inline void pm_runtime_mark_last_busy(struct device *dev)
extern unsigned long this_cpu_load(void);
-extern void calc_global_load(void);
+extern void calc_global_load(unsigned long ticks);
extern unsigned long get_parent_ip(unsigned long addr);
LINUX_MIB_TCPMINTTLDROP, /* RFC 5082 */
LINUX_MIB_TCPDEFERACCEPTDROP,
LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */
+ LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */
__LINUX_MIB_MAX
};
return 0;
}
-extern char * nvram_get(const char *name);
+#ifdef CONFIG_BCM47XX
+#include <asm/mach-bcm47xx/nvram.h>
/* Get the device MAC address */
static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
{
-#ifdef CONFIG_BCM47XX
- char *res = nvram_get("et0macaddr");
- if (res)
- memcpy(macaddr, res, 6);
-#endif
+ char buf[20];
+ if (nvram_getenv("et0macaddr", buf, sizeof(buf)) < 0)
+ return;
+ nvram_parse_macaddr(buf, macaddr);
}
+#else
+static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr)
+{
+}
+#endif
extern int ssb_gige_pcibios_plat_dev_init(struct ssb_device *sdev,
struct pci_dev *pdev);
#define TTY_HUPPED 18 /* Post driver->hangup() */
#define TTY_FLUSHING 19 /* Flushing to ldisc in progress */
#define TTY_FLUSHPENDING 20 /* Queued buffer flush pending */
+#define TTY_HUPPING 21 /* ->hangup() in progress */
#define TTY_WRITE_FLUSH(tty) tty_write_flush((tty))
*
* Copyright(C) 2005, Benedikt Spranger <b.spranger@linutronix.de>
* Copyright(C) 2005, Thomas Gleixner <tglx@linutronix.de>
- * Copyright(C) 2006, Hans J. Koch <hjk@linutronix.de>
+ * Copyright(C) 2006, Hans J. Koch <hjk@hansjkoch.de>
* Copyright(C) 2006, Greg Kroah-Hartman <greg@kroah.com>
*
* Userspace IO driver.
int busnum; /* Bus number (in order of reg) */
const char *bus_name; /* stable id (PCI slot_name etc) */
u8 uses_dma; /* Does the host controller use DMA? */
+ u8 uses_pio_for_control; /*
+ * Does the host controller use PIO
+ * for control transfers?
+ */
u8 otg_port; /* 0, or number of OTG/HNP port */
unsigned is_b_host:1; /* true during some HNP roleswitches */
unsigned b_hnp_enable:1; /* OTG: did A-Host enable HNP? */
#ifndef _LINUX_VIDEO_OUTPUT_H
#define _LINUX_VIDEO_OUTPUT_H
#include <linux/device.h>
+#include <linux/err.h>
struct output_device;
struct output_properties {
int (*set_state)(struct output_device *);
struct device dev;
};
#define to_output_device(obj) container_of(obj, struct output_device, dev)
+#if defined(CONFIG_VIDEO_OUTPUT_CONTROL) || defined(CONFIG_VIDEO_OUTPUT_CONTROL_MODULE)
struct output_device *video_output_register(const char *name,
struct device *dev,
void *devdata,
struct output_properties *op);
void video_output_unregister(struct output_device *dev);
+#else
+static struct output_device *video_output_register(const char *name,
+ struct device *dev,
+ void *devdata,
+ struct output_properties *op)
+{
+ return ERR_PTR(-ENODEV);
+}
+static void video_output_unregister(struct output_device *dev)
+{
+ return;
+}
+#endif
#endif
struct vm_area_struct; /* vma defining user mapping in mm_types.h */
-extern bool vmap_lazy_unmap;
-
/* bits in flags of vmalloc's vm_struct below */
#define VM_IOREMAP 0x00000001 /* ioremap() and friends */
#define VM_ALLOC 0x00000002 /* vmalloc() */
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
struct v4l2_subdev *v4l2_i2c_new_subdev_cfg(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
int irq, void *platform_data,
u8 addr, const unsigned short *probe_addrs);
/* Load an i2c module and return an initialized v4l2_subdev struct.
- Only call request_module if module_name != NULL.
The client_type argument is the name of the chip that's on the adapter. */
static inline struct v4l2_subdev *v4l2_i2c_new_subdev(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter,
- const char *module_name, const char *client_type,
+ struct i2c_adapter *adapter, const char *client_type,
u8 addr, const unsigned short *probe_addrs)
{
- return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, module_name,
- client_type, 0, NULL, addr, probe_addrs);
+ return v4l2_i2c_new_subdev_cfg(v4l2_dev, adapter, client_type, 0, NULL,
+ addr, probe_addrs);
}
struct i2c_board_info;
struct v4l2_subdev *v4l2_i2c_new_subdev_board(struct v4l2_device *v4l2_dev,
- struct i2c_adapter *adapter, const char *module_name,
- struct i2c_board_info *info, const unsigned short *probe_addrs);
+ struct i2c_adapter *adapter, struct i2c_board_info *info,
+ const unsigned short *probe_addrs);
/* Initialize an v4l2_subdev with data from an i2c_client struct */
void v4l2_i2c_subdev_init(struct v4l2_subdev *sd, struct i2c_client *client,
unsigned int notification, void *arg);
/* The control handler. May be NULL. */
struct v4l2_ctrl_handler *ctrl_handler;
+ /* BKL replacement mutex. Temporary solution only. */
+ struct mutex ioctl_lock;
};
/* Initialize v4l2_dev and make dev->driver_data point to v4l2_dev.
extern void unix_notinflight(struct file *fp);
extern void unix_gc(void);
extern void wait_for_unix_gc(void);
+extern struct sock *unix_get_socket(struct file *filp);
#define UNIX_HASH_SIZE 256
spinlock_t lock;
unsigned int gc_candidate : 1;
unsigned int gc_maybe_cycle : 1;
+ unsigned char recursion_level;
struct socket_wq peer_wq;
};
#define unix_sk(__sk) ((struct unix_sock *)__sk)
/* Initialise core socket variables */
extern void sock_init_data(struct socket *sock, struct sock *sk);
+extern void sk_filter_release_rcu(struct rcu_head *rcu);
+
/**
* sk_filter_release - release a socket filter
* @fp: filter to remove
static inline void sk_filter_release(struct sk_filter *fp)
{
if (atomic_dec_and_test(&fp->refcnt))
- kfree(fp);
+ call_rcu_bh(&fp->rcu, sk_filter_release_rcu);
}
static inline void sk_filter_uncharge(struct sock *sk, struct sk_filter *fp)
#ifdef CONFIG_PCI_MSI
/* Allocate an irq and a pirq to be used with MSIs. */
-void xen_allocate_pirq_msi(char *name, int *irq, int *pirq);
+#define XEN_ALLOC_PIRQ (1 << 0)
+#define XEN_ALLOC_IRQ (1 << 1)
+void xen_allocate_pirq_msi(char *name, int *irq, int *pirq, int alloc_mask);
int xen_create_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int type);
#endif
/* Return gsi allocated to pirq */
int xen_gsi_from_irq(unsigned pirq);
+/* Return irq from pirq */
+int xen_irq_from_pirq(unsigned pirq);
+
#endif /* _XEN_EVENTS_H */
* A ring contains as many entries as will fit, rounded down to the nearest
* power of two (so we can mask with (size-1) to loop around).
*/
-#define __RING_SIZE(_s, _sz) \
- (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
+#define __CONST_RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - offsetof(struct _s##_sring, ring)) / \
+ sizeof(((struct _s##_sring *)0)->ring[0])))
+
+/*
+ * The same for passing in an actual pointer instead of a name tag.
+ */
+#define __RING_SIZE(_s, _sz) \
+ (__RD32(((_sz) - (long)&(_s)->ring + (long)(_s)) / sizeof((_s)->ring[0])))
/*
* Macros to make the correct C datatypes for a new kind of ring.
uint32_t nr_pirqs;
};
+/* type is MAP_PIRQ_TYPE_GSI or MAP_PIRQ_TYPE_MSI
+ * the hypercall returns a free pirq */
+#define PHYSDEVOP_get_free_pirq 23
+struct physdev_get_free_pirq {
+ /* IN */
+ int type;
+ /* OUT */
+ uint32_t pirq;
+};
+
/*
* Notify that some PIRQ-bound event channels have been unmasked.
* ** This command is obsolete since interface version 0x00030202 and is **
if (unlikely(!tsk->pid))
panic("Attempted to kill the idle task!");
+ /*
+ * If do_exit is called because this processes oopsed, it's possible
+ * that get_fs() was left as KERNEL_DS, so reset it to USER_DS before
+ * continuing. Amongst other possible reasons, this is to prevent
+ * mm_release()->clear_child_tid() from writing to a user-controlled
+ * kernel address.
+ */
+ set_fs(USER_DS);
+
tracehook_report_exit(&code);
validate_creds_for_do_exit(tsk);
setup_thread_stack(tsk, orig);
clear_user_return_notifier(tsk);
+ clear_tsk_need_resched(tsk);
stackend = end_of_stack(tsk);
*stackend = STACK_END_MAGIC; /* for overflow detection */
static int irq_spurious_proc_open(struct inode *inode, struct file *file)
{
- return single_open(file, irq_spurious_proc_show, NULL);
+ return single_open(file, irq_spurious_proc_show, PDE(inode)->data);
}
static const struct file_operations irq_spurious_proc_fops = {
{
int ctxn;
- perf_sw_event(PERF_COUNT_SW_CONTEXT_SWITCHES, 1, 1, NULL, 0);
-
for_each_task_context_nr(ctxn)
perf_event_context_sched_out(task, ctxn, next);
}
{
raw_spin_lock(&ctx->lock);
- /* Rotate the first entry last of non-pinned groups */
- list_rotate_left(&ctx->flexible_groups);
+ /*
+ * Rotate the first entry last of non-pinned groups. Rotation might be
+ * disabled by the inheritance code.
+ */
+ if (!ctx->rotate_disable)
+ list_rotate_left(&ctx->flexible_groups);
raw_spin_unlock(&ctx->lock);
}
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_task_ctx(&cpuctx->ctx, task_event);
ctx = task_event->task_ctx;
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_comm_ctx(&cpuctx->ctx, comm_event);
ctxn = pmu->task_ctx_nr;
rcu_read_lock();
list_for_each_entry_rcu(pmu, &pmus, entry) {
cpuctx = get_cpu_ptr(pmu->pmu_cpu_context);
+ if (cpuctx->active_pmu != pmu)
+ goto next;
perf_event_mmap_ctx(&cpuctx->ctx, mmap_event,
vma->vm_flags & VM_EXEC);
break;
}
- if (event_id > PERF_COUNT_SW_MAX)
+ if (event_id >= PERF_COUNT_SW_MAX)
return -ENOENT;
if (!event->parent) {
return NULL;
}
-static void free_pmu_context(void * __percpu cpu_context)
+static void update_pmu_context(struct pmu *pmu, struct pmu *old_pmu)
{
- struct pmu *pmu;
+ int cpu;
+
+ for_each_possible_cpu(cpu) {
+ struct perf_cpu_context *cpuctx;
+
+ cpuctx = per_cpu_ptr(pmu->pmu_cpu_context, cpu);
+
+ if (cpuctx->active_pmu == old_pmu)
+ cpuctx->active_pmu = pmu;
+ }
+}
+
+static void free_pmu_context(struct pmu *pmu)
+{
+ struct pmu *i;
mutex_lock(&pmus_lock);
/*
* Like a real lame refcount.
*/
- list_for_each_entry(pmu, &pmus, entry) {
- if (pmu->pmu_cpu_context == cpu_context)
+ list_for_each_entry(i, &pmus, entry) {
+ if (i->pmu_cpu_context == pmu->pmu_cpu_context) {
+ update_pmu_context(i, pmu);
goto out;
+ }
}
- free_percpu(cpu_context);
+ free_percpu(pmu->pmu_cpu_context);
out:
mutex_unlock(&pmus_lock);
}
cpuctx->ctx.pmu = pmu;
cpuctx->jiffies_interval = 1;
INIT_LIST_HEAD(&cpuctx->rotation_list);
+ cpuctx->active_pmu = pmu;
}
got_cpu_context:
synchronize_rcu();
free_percpu(pmu->pmu_disable_count);
- free_pmu_context(pmu->pmu_cpu_context);
+ free_pmu_context(pmu);
}
struct pmu *perf_init_event(struct perf_event *event)
struct perf_event *event;
struct task_struct *parent = current;
int inherited_all = 1;
+ unsigned long flags;
int ret = 0;
child->perf_event_ctxp[ctxn] = NULL;
break;
}
+ /*
+ * We can't hold ctx->lock when iterating the ->flexible_group list due
+ * to allocations, but we need to prevent rotation because
+ * rotate_ctx() will change the list from interrupt context.
+ */
+ raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+ parent_ctx->rotate_disable = 1;
+ raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
list_for_each_entry(event, &parent_ctx->flexible_groups, group_entry) {
ret = inherit_task_group(event, parent, parent_ctx,
child, ctxn, &inherited_all);
break;
}
+ raw_spin_lock_irqsave(&parent_ctx->lock, flags);
+ parent_ctx->rotate_disable = 0;
+ raw_spin_unlock_irqrestore(&parent_ctx->lock, flags);
+
child_ctx = child->perf_event_ctxp[ctxn];
if (child_ctx && inherited_all) {
int hibernation_snapshot(int platform_mode)
{
int error;
- gfp_t saved_mask;
error = platform_begin(platform_mode);
if (error)
goto Close;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_FREEZE);
if (error)
goto Recover_platform;
goto Recover_platform;
error = create_image(platform_mode);
- /* Control returns here after successful restore */
+ /*
+ * Control returns here (1) after the image has been created or the
+ * image creation has failed and (2) after a successful restore.
+ */
Resume_devices:
/* We may need to release the preallocated image pages here. */
dpm_resume_end(in_suspend ?
(error ? PMSG_RECOVER : PMSG_THAW) : PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
+
+ if (error || !in_suspend)
+ pm_restore_gfp_mask();
+
resume_console();
Close:
platform_end(platform_mode);
int hibernation_restore(int platform_mode)
{
int error;
- gfp_t saved_mask;
pm_prepare_console();
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
dpm_resume_end(PMSG_RECOVER);
}
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
pm_restore_console();
return error;
int hibernation_platform_enter(void)
{
int error;
- gfp_t saved_mask;
if (!hibernation_ops)
return -ENOSYS;
entering_platform_hibernation = true;
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
error = dpm_suspend_start(PMSG_HIBERNATE);
if (error) {
if (hibernation_ops->recover)
Resume_devices:
entering_platform_hibernation = false;
dpm_resume_end(PMSG_RESTORE);
- set_gfp_allowed_mask(saved_mask);
resume_console();
Close:
swsusp_free();
if (!error)
power_down();
+ pm_restore_gfp_mask();
} else {
pr_debug("PM: Image restored successfully.\n");
}
int suspend_devices_and_enter(suspend_state_t state)
{
int error;
- gfp_t saved_mask;
if (!suspend_ops)
return -ENOSYS;
goto Close;
}
suspend_console();
- saved_mask = clear_gfp_allowed_mask(GFP_IOFS);
+ pm_restrict_gfp_mask();
suspend_test_start();
error = dpm_suspend_start(PMSG_SUSPEND);
if (error) {
suspend_test_start();
dpm_resume_end(PMSG_RESUME);
suspend_test_finish("resume devices");
- set_gfp_allowed_mask(saved_mask);
+ pm_restore_gfp_mask();
resume_console();
Close:
if (suspend_ops->end)
*
* Copyright (C) 1998,2001-2005 Pavel Machek <pavel@ucw.cz>
* Copyright (C) 2006 Rafael J. Wysocki <rjw@sisk.pl>
+ * Copyright (C) 2010 Bojan Smojver <bojan@rexursive.com>
*
* This file is released under the GPLv2.
*
#include "power.h"
-#define HIBERNATE_SIG "LINHIB0001"
+#define HIBERNATE_SIG "S1SUSPEND"
/*
* The swap map is a data structure used for keeping track of each page
{
unsigned int m;
int error = 0;
+ struct bio *bio;
struct timeval start;
struct timeval stop;
unsigned nr_pages;
- size_t off, unc_len, cmp_len;
- unsigned char *unc, *cmp, *page;
+ size_t i, off, unc_len, cmp_len;
+ unsigned char *unc, *cmp, *page[LZO_CMP_PAGES];
- page = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
- if (!page) {
- printk(KERN_ERR "PM: Failed to allocate LZO page\n");
- return -ENOMEM;
+ for (i = 0; i < LZO_CMP_PAGES; i++) {
+ page[i] = (void *)__get_free_page(__GFP_WAIT | __GFP_HIGH);
+ if (!page[i]) {
+ printk(KERN_ERR "PM: Failed to allocate LZO page\n");
+
+ while (i)
+ free_page((unsigned long)page[--i]);
+
+ return -ENOMEM;
+ }
}
unc = vmalloc(LZO_UNC_SIZE);
if (!unc) {
printk(KERN_ERR "PM: Failed to allocate LZO uncompressed\n");
- free_page((unsigned long)page);
+
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
cmp = vmalloc(LZO_CMP_SIZE);
if (!cmp) {
printk(KERN_ERR "PM: Failed to allocate LZO compressed\n");
+
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
+
return -ENOMEM;
}
if (!m)
m = 1;
nr_pages = 0;
+ bio = NULL;
do_gettimeofday(&start);
error = snapshot_write_next(snapshot);
goto out_finish;
for (;;) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ error = swap_read_page(handle, page[0], NULL); /* sync */
if (error)
break;
- cmp_len = *(size_t *)page;
+ cmp_len = *(size_t *)page[0];
if (unlikely(!cmp_len ||
cmp_len > lzo1x_worst_compress(LZO_UNC_SIZE))) {
printk(KERN_ERR "PM: Invalid LZO compressed length\n");
break;
}
- memcpy(cmp, page, PAGE_SIZE);
- for (off = PAGE_SIZE; off < LZO_HEADER + cmp_len; off += PAGE_SIZE) {
- error = swap_read_page(handle, page, NULL); /* sync */
+ for (off = PAGE_SIZE, i = 1;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ error = swap_read_page(handle, page[i], &bio);
if (error)
goto out_finish;
+ }
- memcpy(cmp + off, page, PAGE_SIZE);
+ error = hib_wait_on_bio_chain(&bio); /* need all data now */
+ if (error)
+ goto out_finish;
+
+ for (off = 0, i = 0;
+ off < LZO_HEADER + cmp_len; off += PAGE_SIZE, i++) {
+ memcpy(cmp + off, page[i], PAGE_SIZE);
}
unc_len = LZO_UNC_SIZE;
vfree(cmp);
vfree(unc);
- free_page((unsigned long)page);
+ for (i = 0; i < LZO_CMP_PAGES; i++)
+ free_page((unsigned long)page[i]);
return error;
}
free_all_swap_pages(data->swap);
if (data->frozen)
thaw_processes();
- pm_notifier_call_chain(data->mode == O_WRONLY ?
+ pm_notifier_call_chain(data->mode == O_RDONLY ?
PM_POST_HIBERNATION : PM_POST_RESTORE);
atomic_inc(&snapshot_device_available);
case SNAPSHOT_UNFREEZE:
if (!data->frozen || data->ready)
break;
+ pm_restore_gfp_mask();
thaw_processes();
usermodehelper_enable();
data->frozen = 0;
error = -EPERM;
break;
}
+ pm_restore_gfp_mask();
error = hibernation_snapshot(data->platform_support);
if (!error)
error = put_user(in_suspend, (int __user *)arg);
int printk_needs_cpu(int cpu)
{
+ if (unlikely(cpu_is_offline(cpu)))
+ printk_tick();
return per_cpu(printk_pending, cpu);
}
void wake_up_klogd(void)
{
if (waitqueue_active(&log_wait))
- __raw_get_cpu_var(printk_pending) = 1;
+ this_cpu_write(printk_pending, 1);
}
/**
static DEFINE_RWLOCK(resource_lock);
-/*
- * By default, we allocate free space bottom-up. The architecture can request
- * top-down by clearing this flag. The user can override the architecture's
- * choice with the "resource_alloc_from_bottom" kernel boot option, but that
- * should only be a debugging tool.
- */
-int resource_alloc_from_bottom = 1;
-
-static __init int setup_alloc_from_bottom(char *s)
-{
- printk(KERN_INFO
- "resource: allocating from bottom-up; please report a bug\n");
- resource_alloc_from_bottom = 1;
- return 0;
-}
-early_param("resource_alloc_from_bottom", setup_alloc_from_bottom);
-
static void *r_next(struct seq_file *m, void *v, loff_t *pos)
{
struct resource *p = v;
return walk_system_ram_range(pfn, 1, NULL, __is_ram) == 1;
}
+void __weak arch_remove_reservations(struct resource *avail)
+{
+}
+
static resource_size_t simple_align_resource(void *data,
const struct resource *avail,
resource_size_t size,
return res1->start <= res2->start && res1->end >= res2->end;
}
-/*
- * Find the resource before "child" in the sibling list of "root" children.
- */
-static struct resource *find_sibling_prev(struct resource *root, struct resource *child)
-{
- struct resource *this;
-
- for (this = root->child; this; this = this->sibling)
- if (this->sibling == child)
- return this;
-
- return NULL;
-}
-
/*
* Find empty slot in the resource tree given range and alignment.
- * This version allocates from the end of the root resource first.
- */
-static int find_resource_from_top(struct resource *root, struct resource *new,
- resource_size_t size, resource_size_t min,
- resource_size_t max, resource_size_t align,
- resource_size_t (*alignf)(void *,
- const struct resource *,
- resource_size_t,
- resource_size_t),
- void *alignf_data)
-{
- struct resource *this;
- struct resource tmp, avail, alloc;
-
- tmp.start = root->end;
- tmp.end = root->end;
-
- this = find_sibling_prev(root, NULL);
- for (;;) {
- if (this) {
- if (this->end < root->end)
- tmp.start = this->end + 1;
- } else
- tmp.start = root->start;
-
- resource_clip(&tmp, min, max);
-
- /* Check for overflow after ALIGN() */
- avail = *new;
- avail.start = ALIGN(tmp.start, align);
- avail.end = tmp.end;
- if (avail.start >= tmp.start) {
- alloc.start = alignf(alignf_data, &avail, size, align);
- alloc.end = alloc.start + size - 1;
- if (resource_contains(&avail, &alloc)) {
- new->start = alloc.start;
- new->end = alloc.end;
- return 0;
- }
- }
-
- if (!this || this->start == root->start)
- break;
-
- tmp.end = this->start - 1;
- this = find_sibling_prev(root, this);
- }
- return -EBUSY;
-}
-
-/*
- * Find empty slot in the resource tree given range and alignment.
- * This version allocates from the beginning of the root resource first.
*/
static int find_resource(struct resource *root, struct resource *new,
resource_size_t size, resource_size_t min,
struct resource *this = root->child;
struct resource tmp = *new, avail, alloc;
+ tmp.flags = new->flags;
tmp.start = root->start;
/*
- * Skip past an allocated resource that starts at 0, since the
- * assignment of this->start - 1 to tmp->end below would cause an
- * underflow.
+ * Skip past an allocated resource that starts at 0, since the assignment
+ * of this->start - 1 to tmp->end below would cause an underflow.
*/
if (this && this->start == 0) {
tmp.start = this->end + 1;
this = this->sibling;
}
- for (;;) {
+ for(;;) {
if (this)
tmp.end = this->start - 1;
else
tmp.end = root->end;
resource_clip(&tmp, min, max);
+ arch_remove_reservations(&tmp);
/* Check for overflow after ALIGN() */
avail = *new;
return 0;
}
}
-
if (!this)
break;
-
tmp.start = this->end + 1;
this = this->sibling;
}
alignf = simple_align_resource;
write_lock(&resource_lock);
- if (resource_alloc_from_bottom)
- err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
- else
- err = find_resource_from_top(root, new, size, min, max, align, alignf, alignf_data);
+ err = find_resource(root, new, size, min, max, align, alignf, alignf_data);
if (err >= 0 && __request_resource(root, new))
err = -EBUSY;
write_unlock(&resource_lock);
#endif /* CONFIG_CGROUP_SCHED */
-static u64 irq_time_cpu(int cpu);
-static void sched_irq_time_avg_update(struct rq *rq, u64 irq_time);
+static void update_rq_clock_task(struct rq *rq, s64 delta);
-inline void update_rq_clock(struct rq *rq)
+static void update_rq_clock(struct rq *rq)
{
- if (!rq->skip_clock_update) {
- int cpu = cpu_of(rq);
- u64 irq_time;
+ s64 delta;
- rq->clock = sched_clock_cpu(cpu);
- irq_time = irq_time_cpu(cpu);
- if (rq->clock - irq_time > rq->clock_task)
- rq->clock_task = rq->clock - irq_time;
+ if (rq->skip_clock_update)
+ return;
- sched_irq_time_avg_update(rq, irq_time);
- }
+ delta = sched_clock_cpu(cpu_of(rq)) - rq->clock;
+ rq->clock += delta;
+ update_rq_clock_task(rq, delta);
}
/*
* They are read and saved off onto struct rq in update_rq_clock().
* This may result in other CPU reading this CPU's irq time and can
* race with irq/account_system_vtime on this CPU. We would either get old
- * or new value (or semi updated value on 32 bit) with a side effect of
- * accounting a slice of irq time to wrong task when irq is in progress
- * while we read rq->clock. That is a worthy compromise in place of having
- * locks on each irq in account_system_time.
+ * or new value with a side effect of accounting a slice of irq time to wrong
+ * task when irq is in progress while we read rq->clock. That is a worthy
+ * compromise in place of having locks on each irq in account_system_time.
*/
static DEFINE_PER_CPU(u64, cpu_hardirq_time);
static DEFINE_PER_CPU(u64, cpu_softirq_time);
sched_clock_irqtime = 0;
}
-static u64 irq_time_cpu(int cpu)
+#ifndef CONFIG_64BIT
+static DEFINE_PER_CPU(seqcount_t, irq_time_seq);
+
+static inline void irq_time_write_begin(void)
{
- if (!sched_clock_irqtime)
- return 0;
+ __this_cpu_inc(irq_time_seq.sequence);
+ smp_wmb();
+}
+
+static inline void irq_time_write_end(void)
+{
+ smp_wmb();
+ __this_cpu_inc(irq_time_seq.sequence);
+}
+
+static inline u64 irq_time_read(int cpu)
+{
+ u64 irq_time;
+ unsigned seq;
+ do {
+ seq = read_seqcount_begin(&per_cpu(irq_time_seq, cpu));
+ irq_time = per_cpu(cpu_softirq_time, cpu) +
+ per_cpu(cpu_hardirq_time, cpu);
+ } while (read_seqcount_retry(&per_cpu(irq_time_seq, cpu), seq));
+
+ return irq_time;
+}
+#else /* CONFIG_64BIT */
+static inline void irq_time_write_begin(void)
+{
+}
+
+static inline void irq_time_write_end(void)
+{
+}
+
+static inline u64 irq_time_read(int cpu)
+{
return per_cpu(cpu_softirq_time, cpu) + per_cpu(cpu_hardirq_time, cpu);
}
+#endif /* CONFIG_64BIT */
+/*
+ * Called before incrementing preempt_count on {soft,}irq_enter
+ * and before decrementing preempt_count on {soft,}irq_exit.
+ */
void account_system_vtime(struct task_struct *curr)
{
unsigned long flags;
+ s64 delta;
int cpu;
- u64 now, delta;
if (!sched_clock_irqtime)
return;
local_irq_save(flags);
cpu = smp_processor_id();
- now = sched_clock_cpu(cpu);
- delta = now - per_cpu(irq_start_time, cpu);
- per_cpu(irq_start_time, cpu) = now;
+ delta = sched_clock_cpu(cpu) - __this_cpu_read(irq_start_time);
+ __this_cpu_add(irq_start_time, delta);
+
+ irq_time_write_begin();
/*
* We do not account for softirq time from ksoftirqd here.
* We want to continue accounting softirq time to ksoftirqd thread
* that do not consume any time, but still wants to run.
*/
if (hardirq_count())
- per_cpu(cpu_hardirq_time, cpu) += delta;
+ __this_cpu_add(cpu_hardirq_time, delta);
else if (in_serving_softirq() && !(curr->flags & PF_KSOFTIRQD))
- per_cpu(cpu_softirq_time, cpu) += delta;
+ __this_cpu_add(cpu_softirq_time, delta);
+ irq_time_write_end();
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(account_system_vtime);
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- if (sched_clock_irqtime && sched_feat(NONIRQ_POWER)) {
- u64 delta_irq = curr_irq_time - rq->prev_irq_time;
- rq->prev_irq_time = curr_irq_time;
- sched_rt_avg_update(rq, delta_irq);
- }
+ s64 irq_delta;
+
+ irq_delta = irq_time_read(cpu_of(rq)) - rq->prev_irq_time;
+
+ /*
+ * Since irq_time is only updated on {soft,}irq_exit, we might run into
+ * this case when a previous update_rq_clock() happened inside a
+ * {soft,}irq region.
+ *
+ * When this happens, we stop ->clock_task and only update the
+ * prev_irq_time stamp to account for the part that fit, so that a next
+ * update will consume the rest. This ensures ->clock_task is
+ * monotonic.
+ *
+ * It does however cause some slight miss-attribution of {soft,}irq
+ * time, a more accurate solution would be to update the irq_time using
+ * the current rq->clock timestamp, except that would require using
+ * atomic ops.
+ */
+ if (irq_delta > delta)
+ irq_delta = delta;
+
+ rq->prev_irq_time += irq_delta;
+ delta -= irq_delta;
+ rq->clock_task += delta;
+
+ if (irq_delta && sched_feat(NONIRQ_POWER))
+ sched_rt_avg_update(rq, irq_delta);
}
-#else
+#else /* CONFIG_IRQ_TIME_ACCOUNTING */
-static u64 irq_time_cpu(int cpu)
+static void update_rq_clock_task(struct rq *rq, s64 delta)
{
- return 0;
+ rq->clock_task += delta;
}
-static void sched_irq_time_avg_update(struct rq *rq, u64 curr_irq_time) { }
-
-#endif
+#endif /* CONFIG_IRQ_TIME_ACCOUNTING */
#include "sched_idletask.c"
#include "sched_fair.c"
* A queue event has occurred, and we're going to schedule. In
* this case, we can save a useless back to back clock update.
*/
- if (test_tsk_need_resched(rq->curr))
+ if (rq->curr->se.on_rq && test_tsk_need_resched(rq->curr))
rq->skip_clock_update = 1;
}
return delta;
}
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+ load *= exp;
+ load += active * (FIXED_1 - exp);
+ load += 1UL << (FSHIFT - 1);
+ return load >> FSHIFT;
+}
+
#ifdef CONFIG_NO_HZ
/*
* For NO_HZ we delay the active fold to the next LOAD_FREQ update.
return delta;
}
+
+/**
+ * fixed_power_int - compute: x^n, in O(log n) time
+ *
+ * @x: base of the power
+ * @frac_bits: fractional bits of @x
+ * @n: power to raise @x to.
+ *
+ * By exploiting the relation between the definition of the natural power
+ * function: x^n := x*x*...*x (x multiplied by itself for n times), and
+ * the binary encoding of numbers used by computers: n := \Sum n_i * 2^i,
+ * (where: n_i \elem {0, 1}, the binary vector representing n),
+ * we find: x^n := x^(\Sum n_i * 2^i) := \Prod x^(n_i * 2^i), which is
+ * of course trivially computable in O(log_2 n), the length of our binary
+ * vector.
+ */
+static unsigned long
+fixed_power_int(unsigned long x, unsigned int frac_bits, unsigned int n)
+{
+ unsigned long result = 1UL << frac_bits;
+
+ if (n) for (;;) {
+ if (n & 1) {
+ result *= x;
+ result += 1UL << (frac_bits - 1);
+ result >>= frac_bits;
+ }
+ n >>= 1;
+ if (!n)
+ break;
+ x *= x;
+ x += 1UL << (frac_bits - 1);
+ x >>= frac_bits;
+ }
+
+ return result;
+}
+
+/*
+ * a1 = a0 * e + a * (1 - e)
+ *
+ * a2 = a1 * e + a * (1 - e)
+ * = (a0 * e + a * (1 - e)) * e + a * (1 - e)
+ * = a0 * e^2 + a * (1 - e) * (1 + e)
+ *
+ * a3 = a2 * e + a * (1 - e)
+ * = (a0 * e^2 + a * (1 - e) * (1 + e)) * e + a * (1 - e)
+ * = a0 * e^3 + a * (1 - e) * (1 + e + e^2)
+ *
+ * ...
+ *
+ * an = a0 * e^n + a * (1 - e) * (1 + e + ... + e^n-1) [1]
+ * = a0 * e^n + a * (1 - e) * (1 - e^n)/(1 - e)
+ * = a0 * e^n + a * (1 - e^n)
+ *
+ * [1] application of the geometric series:
+ *
+ * n 1 - x^(n+1)
+ * S_n := \Sum x^i = -------------
+ * i=0 1 - x
+ */
+static unsigned long
+calc_load_n(unsigned long load, unsigned long exp,
+ unsigned long active, unsigned int n)
+{
+
+ return calc_load(load, fixed_power_int(exp, FSHIFT, n), active);
+}
+
+/*
+ * NO_HZ can leave us missing all per-cpu ticks calling
+ * calc_load_account_active(), but since an idle CPU folds its delta into
+ * calc_load_tasks_idle per calc_load_account_idle(), all we need to do is fold
+ * in the pending idle delta if our idle period crossed a load cycle boundary.
+ *
+ * Once we've updated the global active value, we need to apply the exponential
+ * weights adjusted to the number of cycles missed.
+ */
+static void calc_global_nohz(unsigned long ticks)
+{
+ long delta, active, n;
+
+ if (time_before(jiffies, calc_load_update))
+ return;
+
+ /*
+ * If we crossed a calc_load_update boundary, make sure to fold
+ * any pending idle changes, the respective CPUs might have
+ * missed the tick driven calc_load_account_active() update
+ * due to NO_HZ.
+ */
+ delta = calc_load_fold_idle();
+ if (delta)
+ atomic_long_add(delta, &calc_load_tasks);
+
+ /*
+ * If we were idle for multiple load cycles, apply them.
+ */
+ if (ticks >= LOAD_FREQ) {
+ n = ticks / LOAD_FREQ;
+
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
+
+ avenrun[0] = calc_load_n(avenrun[0], EXP_1, active, n);
+ avenrun[1] = calc_load_n(avenrun[1], EXP_5, active, n);
+ avenrun[2] = calc_load_n(avenrun[2], EXP_15, active, n);
+
+ calc_load_update += n * LOAD_FREQ;
+ }
+
+ /*
+ * Its possible the remainder of the above division also crosses
+ * a LOAD_FREQ period, the regular check in calc_global_load()
+ * which comes after this will take care of that.
+ *
+ * Consider us being 11 ticks before a cycle completion, and us
+ * sleeping for 4*LOAD_FREQ + 22 ticks, then the above code will
+ * age us 4 cycles, and the test in calc_global_load() will
+ * pick up the final one.
+ */
+}
#else
static void calc_load_account_idle(struct rq *this_rq)
{
{
return 0;
}
+
+static void calc_global_nohz(unsigned long ticks)
+{
+}
#endif
/**
loads[2] = (avenrun[2] + offset) << shift;
}
-static unsigned long
-calc_load(unsigned long load, unsigned long exp, unsigned long active)
-{
- load *= exp;
- load += active * (FIXED_1 - exp);
- return load >> FSHIFT;
-}
-
/*
* calc_load - update the avenrun load estimates 10 ticks after the
* CPUs have updated calc_load_tasks.
*/
-void calc_global_load(void)
+void calc_global_load(unsigned long ticks)
{
- unsigned long upd = calc_load_update + 10;
long active;
- if (time_before(jiffies, upd))
+ calc_global_nohz(ticks);
+
+ if (time_before(jiffies, calc_load_update + 10))
return;
active = atomic_long_read(&calc_load_tasks);
{
if (prev->se.on_rq)
update_rq_clock(rq);
- rq->skip_clock_update = 0;
prev->sched_class->put_prev_task(rq, prev);
}
hrtick_clear(rq);
raw_spin_lock_irq(&rq->lock);
- clear_tsk_need_resched(prev);
switch_count = &prev->nivcsw;
if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) {
put_prev_task(rq, prev);
next = pick_next_task(rq);
+ clear_tsk_need_resched(prev);
+ rq->skip_clock_update = 0;
if (likely(prev != next)) {
sched_info_switch(prev, next);
struct tvec_base *base = __get_cpu_var(tvec_bases);
unsigned long expires;
+ /*
+ * Pretend that there is no timer pending if the cpu is offline.
+ * Possible pending timers will be migrated later to an active cpu.
+ */
+ if (cpu_is_offline(smp_processor_id()))
+ return now + NEXT_TIMER_MAX_DELTA;
spin_lock(&base->lock);
if (time_before_eq(base->next_timer, base->timer_jiffies))
base->next_timer = __next_timer_interrupt(base);
{
jiffies_64 += ticks;
update_wall_time();
- calc_global_load();
+ calc_global_load(ticks);
}
#ifdef __ARCH_WANT_SYS_ALARM
return count;
}
+static loff_t tracing_seek(struct file *file, loff_t offset, int origin)
+{
+ if (file->f_mode & FMODE_READ)
+ return seq_lseek(file, offset, origin);
+ else
+ return 0;
+}
+
static const struct file_operations tracing_fops = {
.open = tracing_open,
.read = seq_read,
.write = tracing_write_stub,
- .llseek = seq_lseek,
+ .llseek = tracing_seek,
.release = tracing_release,
};
{
struct worker *worker = kthread_data(task);
- if (likely(!(worker->flags & WORKER_NOT_RUNNING)))
+ if (!(worker->flags & WORKER_NOT_RUNNING))
atomic_inc(get_gcwq_nr_running(cpu));
}
struct global_cwq *gcwq = get_gcwq(cpu);
atomic_t *nr_running = get_gcwq_nr_running(cpu);
- if (unlikely(worker->flags & WORKER_NOT_RUNNING))
+ if (worker->flags & WORKER_NOT_RUNNING)
return NULL;
/* this can only happen on the local cpu */
system_nrt_wq = alloc_workqueue("events_nrt", WQ_NON_REENTRANT, 0);
system_unbound_wq = alloc_workqueue("events_unbound", WQ_UNBOUND,
WQ_UNBOUND_MAX_ACTIVE);
- BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq);
+ BUG_ON(!system_wq || !system_long_wq || !system_nrt_wq ||
+ !system_unbound_wq);
return 0;
}
early_initcall(init_workqueues);
*
* Copyright (C) 2006 Red Hat, Inc., Ingo Molnar <mingo@redhat.com>
*/
-#include <linux/kernel.h>
#include <linux/rwsem.h>
#include <linux/mutex.h>
#include <linux/module.h>
{
if (__debug_locks_off()) {
if (!debug_locks_silent) {
- oops_in_progress = 1;
console_verbose();
return 1;
}
void remove_from_page_cache(struct page *page)
{
struct address_space *mapping = page->mapping;
+ void (*freepage)(struct page *);
BUG_ON(!PageLocked(page));
+ freepage = mapping->a_ops->freepage;
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage)
+ freepage(page);
}
EXPORT_SYMBOL(remove_from_page_cache);
unlock_page(pagecache_page);
put_page(pagecache_page);
}
- unlock_page(page);
+ if (page != pagecache_page)
+ unlock_page(page);
out_mutex:
mutex_unlock(&hugetlb_instantiation_mutex);
/*
* Keep it very simple for now: just lock out ksmd and
* MADV_UNMERGEABLE while any memory is going offline.
+ * mutex_lock_nested() is necessary because lockdep was alarmed
+ * that here we take ksm_thread_mutex inside notifier chain
+ * mutex, and later take notifier chain mutex inside
+ * ksm_thread_mutex to unlock it. But that's safe because both
+ * are inside mem_hotplug_mutex.
*/
- mutex_lock(&ksm_thread_mutex);
+ mutex_lock_nested(&ksm_thread_mutex, SINGLE_DEPTH_NESTING);
break;
case MEM_OFFLINE:
#include <linux/slab.h>
#include <linux/swapops.h>
#include <linux/hugetlb.h>
+#include <linux/memory_hotplug.h>
#include "internal.h"
int sysctl_memory_failure_early_kill __read_mostly = 0;
return 1;
/*
- * The lock_system_sleep prevents a race with memory hotplug,
- * because the isolation assumes there's only a single user.
+ * The lock_memory_hotplug prevents a race with memory hotplug.
* This is a big hammer, a better would be nicer.
*/
- lock_system_sleep();
+ lock_memory_hotplug();
/*
* Isolate the page, so that it doesn't get reallocated if it
ret = 1;
}
unset_migratetype_isolate(p);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
#include "internal.h"
+DEFINE_MUTEX(mem_hotplug_mutex);
+
+void lock_memory_hotplug(void)
+{
+ mutex_lock(&mem_hotplug_mutex);
+
+ /* for exclusive hibernation if CONFIG_HIBERNATION=y */
+ lock_system_sleep();
+}
+
+void unlock_memory_hotplug(void)
+{
+ unlock_system_sleep();
+ mutex_unlock(&mem_hotplug_mutex);
+}
+
+
/* add this memory to iomem resource */
static struct resource *register_memory_resource(u64 start, u64 size)
{
pg_data_t *pgdat;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
pgdat = hotadd_new_pgdat(nid, 0);
if (pgdat) {
ret = -ENOMEM;
BUG_ON(ret);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
struct resource *res;
int ret;
- lock_system_sleep();
+ lock_memory_hotplug();
res = register_memory_resource(start, size);
ret = -EEXIST;
release_memory_resource(res);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
EXPORT_SYMBOL_GPL(add_memory);
if (!test_pages_in_a_zone(start_pfn, end_pfn))
return -EINVAL;
- lock_system_sleep();
+ lock_memory_hotplug();
zone = page_zone(pfn_to_page(start_pfn));
node = zone_to_nid(zone);
writeback_set_ratelimit();
memory_notify(MEM_OFFLINE, &arg);
- unlock_system_sleep();
+ unlock_memory_hotplug();
return 0;
failed_removal:
undo_isolate_page_range(start_pfn, end_pfn);
out:
- unlock_system_sleep();
+ unlock_memory_hotplug();
return ret;
}
goto out;
/* Find the mm_struct */
+ rcu_read_lock();
read_lock(&tasklist_lock);
task = pid ? find_task_by_vpid(pid) : current;
if (!task) {
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -ESRCH;
goto out;
}
mm = get_task_mm(task);
read_unlock(&tasklist_lock);
+ rcu_read_unlock();
err = -EINVAL;
if (!mm)
unsigned long addr, unsigned long len,
unsigned long vm_flags, struct page **pages)
{
+ int ret;
struct vm_area_struct *vma;
vma = kmem_cache_zalloc(vm_area_cachep, GFP_KERNEL);
vma->vm_ops = &special_mapping_vmops;
vma->vm_private_data = pages;
- if (unlikely(insert_vm_struct(mm, vma))) {
- kmem_cache_free(vm_area_cachep, vma);
- return -ENOMEM;
- }
+ ret = security_file_mmap(NULL, 0, 0, 0, vma->vm_start, 1);
+ if (ret)
+ goto out;
+
+ ret = insert_vm_struct(mm, vma);
+ if (ret)
+ goto out;
mm->total_vm += len >> PAGE_SHIFT;
perf_event_mmap(vma);
return 0;
+
+out:
+ kmem_cache_free(vm_area_cachep, vma);
+ return ret;
}
static DEFINE_MUTEX(mm_all_locks_mutex);
* only be modified with pm_mutex held, unless the suspend/hibernate code is
* guaranteed not to run in parallel with that modification).
*/
-void set_gfp_allowed_mask(gfp_t mask)
+
+static gfp_t saved_gfp_mask;
+
+void pm_restore_gfp_mask(void)
{
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask = mask;
+ if (saved_gfp_mask) {
+ gfp_allowed_mask = saved_gfp_mask;
+ saved_gfp_mask = 0;
+ }
}
-gfp_t clear_gfp_allowed_mask(gfp_t mask)
+void pm_restrict_gfp_mask(void)
{
- gfp_t ret = gfp_allowed_mask;
-
WARN_ON(!mutex_is_locked(&pm_mutex));
- gfp_allowed_mask &= ~mask;
- return ret;
+ WARN_ON(saved_gfp_mask);
+ saved_gfp_mask = gfp_allowed_mask;
+ gfp_allowed_mask &= ~GFP_IOFS;
}
#endif /* CONFIG_PM_SLEEP */
for_each_free_object(p, s, page->freelist) {
set_bit(slab_index(p, s, addr), map);
- if (!check_object(s, page, p, 0))
+ if (!check_object(s, page, p, SLUB_RED_INACTIVE))
return 0;
}
for_each_object(p, s, addr, page->objects)
if (!test_bit(slab_index(p, s, addr), map))
- if (!check_object(s, page, p, 1))
+ if (!check_object(s, page, p, SLUB_RED_ACTIVE))
return 0;
return 1;
}
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (mapping->a_ops->freepage)
+ mapping->a_ops->freepage(page);
+
page_cache_release(page); /* pagecache ref */
return 1;
failed:
#include <asm/tlbflush.h>
#include <asm/shmparam.h>
-bool vmap_lazy_unmap __read_mostly = true;
-
/*** Page table manipulation functions ***/
static void vunmap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end)
{
unsigned int log;
- if (!vmap_lazy_unmap)
- return 0;
-
log = fls(num_online_cpus());
return log * (32UL * 1024 * 1024 / PAGE_SIZE);
if (va->va_end > *end)
*end = va->va_end;
nr += (va->va_end - va->va_start) >> PAGE_SHIFT;
- unmap_vmap_area(va);
list_add_tail(&va->purge_list, &valist);
va->flags |= VM_LAZY_FREEING;
va->flags &= ~VM_LAZY_FREE;
}
/*
- * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
- * called for the correct range previously.
+ * Free a vmap area, caller ensuring that the area has been unmapped
+ * and flush_cache_vunmap had been called for the correct range
+ * previously.
*/
-static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+static void free_vmap_area_noflush(struct vmap_area *va)
{
va->flags |= VM_LAZY_FREE;
atomic_add((va->va_end - va->va_start) >> PAGE_SHIFT, &vmap_lazy_nr);
try_purge_vmap_area_lazy();
}
+/*
+ * Free and unmap a vmap area, caller ensuring flush_cache_vunmap had been
+ * called for the correct range previously.
+ */
+static void free_unmap_vmap_area_noflush(struct vmap_area *va)
+{
+ unmap_vmap_area(va);
+ free_vmap_area_noflush(va);
+}
+
/*
* Free and unmap a vmap area
*/
spin_unlock(&vmap_block_tree_lock);
BUG_ON(tmp != vb);
- free_unmap_vmap_area_noflush(vb->va);
+ free_vmap_area_noflush(vb->va);
call_rcu(&vb->rcu_head, rcu_free_vb);
}
rcu_read_unlock();
BUG_ON(!vb);
+ vunmap_page_range((unsigned long)addr, (unsigned long)addr + size);
+
spin_lock(&vb->lock);
BUG_ON(bitmap_allocate_region(vb->dirty_map, offset >> PAGE_SHIFT, order));
s = vb->va->va_start + (i << PAGE_SHIFT);
e = vb->va->va_start + (j << PAGE_SHIFT);
- vunmap_page_range(s, e);
flush = 1;
if (s < start)
spin_unlock_irq(&mapping->tree_lock);
swapcache_free(swap, page);
} else {
+ void (*freepage)(struct page *);
+
+ freepage = mapping->a_ops->freepage;
+
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
+
+ if (freepage != NULL)
+ freepage(page);
}
return 1;
"nr_shmem",
"nr_dirtied",
"nr_written",
- "nr_dirty_threshold",
- "nr_dirty_background_threshold",
#ifdef CONFIG_NUMA
"numa_hit",
"numa_local",
"numa_other",
#endif
+ "nr_dirty_threshold",
+ "nr_dirty_background_threshold",
#ifdef CONFIG_VM_EVENT_COUNTERS
"pgpgin",
.dev_uevent = atm_uevent,
};
-int atm_register_sysfs(struct atm_dev *adev)
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent)
{
struct device *cdev = &adev->class_dev;
int i, j, err;
cdev->class = &atm_class;
+ cdev->parent = parent;
dev_set_drvdata(cdev, adev);
dev_set_name(cdev, "%s%d", adev->type, adev->number);
}
EXPORT_SYMBOL(atm_dev_lookup);
-struct atm_dev *atm_dev_register(const char *type, const struct atmdev_ops *ops,
- int number, unsigned long *flags)
+struct atm_dev *atm_dev_register(const char *type, struct device *parent,
+ const struct atmdev_ops *ops, int number,
+ unsigned long *flags)
{
struct atm_dev *dev, *inuse;
goto out_fail;
}
- if (atm_register_sysfs(dev) < 0) {
+ if (atm_register_sysfs(dev, parent) < 0) {
pr_err("atm_register_sysfs failed for dev %s\n", type);
atm_proc_dev_deregister(dev);
goto out_fail;
#endif /* CONFIG_PROC_FS */
-int atm_register_sysfs(struct atm_dev *adev);
+int atm_register_sysfs(struct atm_dev *adev, struct device *parent);
void atm_unregister_sysfs(struct atm_dev *adev);
#endif
int lm = 0;
if (type != SCO_LINK && type != ESCO_LINK)
- return 0;
+ return -EINVAL;
BT_DBG("hdev %s, bdaddr %s", hdev->name, batostr(bdaddr));
BT_DBG("hcon %p bdaddr %s status %d", hcon, batostr(&hcon->dst), status);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
if (!status) {
struct sco_conn *conn;
BT_DBG("hcon %p reason %d", hcon, reason);
if (hcon->type != SCO_LINK && hcon->type != ESCO_LINK)
- return 0;
+ return -EINVAL;
sco_conn_del(hcon, bt_err(reason));
#
# Makefile for CEPH filesystem.
#
-
-ifneq ($(KERNELRELEASE),)
-
obj-$(CONFIG_CEPH_LIB) += libceph.o
libceph-objs := ceph_common.o messenger.o msgpool.o buffer.o pagelist.o \
ceph_fs.o ceph_strings.o ceph_hash.o \
pagevec.o
-else
-#Otherwise we were called directly from the command
-# line; invoke the kernel build system.
-
-KERNELDIR ?= /lib/modules/$(shell uname -r)/build
-PWD := $(shell pwd)
-
-default: all
-
-all:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules
-
-modules_install:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) CONFIG_CEPH_LIB=m modules_install
-
-clean:
- $(MAKE) -C $(KERNELDIR) M=$(PWD) clean
-
-endif
EXPORT_SYMBOL(sk_chk_filter);
/**
- * sk_filter_rcu_release - Release a socket filter by rcu_head
+ * sk_filter_release_rcu - Release a socket filter by rcu_head
* @rcu: rcu_head that contains the sk_filter to free
*/
-static void sk_filter_rcu_release(struct rcu_head *rcu)
+void sk_filter_release_rcu(struct rcu_head *rcu)
{
struct sk_filter *fp = container_of(rcu, struct sk_filter, rcu);
- sk_filter_release(fp);
-}
-
-static void sk_filter_delayed_uncharge(struct sock *sk, struct sk_filter *fp)
-{
- unsigned int size = sk_filter_len(fp);
-
- atomic_sub(size, &sk->sk_omem_alloc);
- call_rcu_bh(&fp->rcu, sk_filter_rcu_release);
+ kfree(fp);
}
+EXPORT_SYMBOL(sk_filter_release_rcu);
/**
* sk_attach_filter - attach a socket filter
rcu_assign_pointer(sk->sk_filter, fp);
if (old_fp)
- sk_filter_delayed_uncharge(sk, old_fp);
+ sk_filter_uncharge(sk, old_fp);
return 0;
}
EXPORT_SYMBOL_GPL(sk_attach_filter);
sock_owned_by_user(sk));
if (filter) {
rcu_assign_pointer(sk->sk_filter, NULL);
- sk_filter_delayed_uncharge(sk, filter);
+ sk_filter_uncharge(sk, filter);
ret = 0;
}
return ret;
struct phy_device *phydev;
unsigned int type;
- skb_push(skb, ETH_HLEN);
+ if (skb_headroom(skb) < ETH_HLEN)
+ return false;
+ __skb_push(skb, ETH_HLEN);
type = classify(skb);
- skb_pull(skb, ETH_HLEN);
+ __skb_pull(skb, ETH_HLEN);
switch (type) {
case PTP_CLASS_V1_IPV4:
dccp_update_gsr(sk, seqno);
if (dh->dccph_type != DCCP_PKT_SYNC &&
- (ackno != DCCP_PKT_WITHOUT_ACK_SEQ))
+ ackno != DCCP_PKT_WITHOUT_ACK_SEQ &&
+ after48(ackno, dp->dccps_gar))
dp->dccps_gar = ackno;
} else {
unsigned long now = jiffies;
if (r_len > sizeof(struct linkinfo_dn))
r_len = sizeof(struct linkinfo_dn);
+ memset(&link, 0, sizeof(link));
+
switch(sock->state) {
case SS_CONNECTING:
link.idn_linkstate = LL_CONNECTING;
#include <linux/skbuff.h>
#include <linux/udp.h>
#include <linux/slab.h>
+#include <linux/vmalloc.h>
#include <net/sock.h>
#include <net/inet_common.h>
#include <linux/stat.h>
#endif
#ifdef CONFIG_ECONET_AUNUDP
struct msghdr udpmsg;
- struct iovec iov[msg->msg_iovlen+1];
+ struct iovec iov[2];
struct aunhdr ah;
struct sockaddr_in udpdest;
__kernel_size_t size;
- int i;
mm_segment_t oldfs;
+ char *userbuf;
#endif
/*
mutex_lock(&econet_mutex);
- if (saddr == NULL) {
- struct econet_sock *eo = ec_sk(sk);
-
- addr.station = eo->station;
- addr.net = eo->net;
- port = eo->port;
- cb = eo->cb;
- } else {
- if (msg->msg_namelen < sizeof(struct sockaddr_ec)) {
- mutex_unlock(&econet_mutex);
- return -EINVAL;
- }
- addr.station = saddr->addr.station;
- addr.net = saddr->addr.net;
- port = saddr->port;
- cb = saddr->cb;
- }
+ if (saddr == NULL || msg->msg_namelen < sizeof(struct sockaddr_ec)) {
+ mutex_unlock(&econet_mutex);
+ return -EINVAL;
+ }
+ addr.station = saddr->addr.station;
+ addr.net = saddr->addr.net;
+ port = saddr->port;
+ cb = saddr->cb;
/* Look for a device with the right network number. */
dev = net2dev_map[addr.net];
}
}
- if (len + 15 > dev->mtu) {
- mutex_unlock(&econet_mutex);
- return -EMSGSIZE;
- }
-
if (dev->type == ARPHRD_ECONET) {
/* Real hardware Econet. We're not worthy etc. */
#ifdef CONFIG_ECONET_NATIVE
unsigned short proto = 0;
int res;
+ if (len + 15 > dev->mtu) {
+ mutex_unlock(&econet_mutex);
+ return -EMSGSIZE;
+ }
+
dev_hold(dev);
skb = sock_alloc_send_skb(sk, len+LL_ALLOCATED_SPACE(dev),
eb = (struct ec_cb *)&skb->cb;
- /* BUG: saddr may be NULL */
eb->cookie = saddr->cookie;
eb->sec = *saddr;
eb->sent = ec_tx_done;
return -ENETDOWN; /* No socket - can't send */
}
+ if (len > 32768) {
+ err = -E2BIG;
+ goto error;
+ }
+
/* Make up a UDP datagram and hand it off to some higher intellect. */
memset(&udpdest, 0, sizeof(udpdest));
/* tack our header on the front of the iovec */
size = sizeof(struct aunhdr);
- /*
- * XXX: that is b0rken. We can't mix userland and kernel pointers
- * in iovec, since on a lot of platforms copy_from_user() will
- * *not* work with the kernel and userland ones at the same time,
- * regardless of what we do with set_fs(). And we are talking about
- * econet-over-ethernet here, so "it's only ARM anyway" doesn't
- * apply. Any suggestions on fixing that code? -- AV
- */
iov[0].iov_base = (void *)&ah;
iov[0].iov_len = size;
- for (i = 0; i < msg->msg_iovlen; i++) {
- void __user *base = msg->msg_iov[i].iov_base;
- size_t iov_len = msg->msg_iov[i].iov_len;
- /* Check it now since we switch to KERNEL_DS later. */
- if (!access_ok(VERIFY_READ, base, iov_len)) {
- mutex_unlock(&econet_mutex);
- return -EFAULT;
- }
- iov[i+1].iov_base = base;
- iov[i+1].iov_len = iov_len;
- size += iov_len;
+
+ userbuf = vmalloc(len);
+ if (userbuf == NULL) {
+ err = -ENOMEM;
+ goto error;
}
+ iov[1].iov_base = userbuf;
+ iov[1].iov_len = len;
+ err = memcpy_fromiovec(userbuf, msg->msg_iov, len);
+ if (err)
+ goto error_free_buf;
+
/* Get a skbuff (no data, just holds our cb information) */
if ((skb = sock_alloc_send_skb(sk, 0,
msg->msg_flags & MSG_DONTWAIT,
- &err)) == NULL) {
- mutex_unlock(&econet_mutex);
- return err;
- }
+ &err)) == NULL)
+ goto error_free_buf;
eb = (struct ec_cb *)&skb->cb;
udpmsg.msg_name = (void *)&udpdest;
udpmsg.msg_namelen = sizeof(udpdest);
udpmsg.msg_iov = &iov[0];
- udpmsg.msg_iovlen = msg->msg_iovlen + 1;
+ udpmsg.msg_iovlen = 2;
udpmsg.msg_control = NULL;
udpmsg.msg_controllen = 0;
udpmsg.msg_flags=0;
oldfs = get_fs(); set_fs(KERNEL_DS); /* More privs :-) */
err = sock_sendmsg(udpsock, &udpmsg, size);
set_fs(oldfs);
+
+error_free_buf:
+ vfree(userbuf);
#else
err = -EPROTOTYPE;
#endif
+ error:
mutex_unlock(&econet_mutex);
return err;
err = 0;
switch (cmd) {
case SIOCSIFADDR:
+ if (!capable(CAP_NET_ADMIN)) {
+ err = -EPERM;
+ break;
+ }
+
edev = dev->ec_ptr;
if (edev == NULL) {
/* Magic up a new one. */
{
struct iphdr *ip = ip_hdr(skb);
unsigned char stn = ntohl(ip->saddr) & 0xff;
+ struct dst_entry *dst = skb_dst(skb);
+ struct ec_device *edev = NULL;
struct sock *sk = NULL;
struct sk_buff *newskb;
- struct ec_device *edev = skb->dev->ec_ptr;
+
+ if (dst)
+ edev = dst->dev->ec_ptr;
if (! edev)
goto bad;
}
}
}
- sk_add_bind_node(child, &tb->owners);
- inet_csk(child)->icsk_bind_hash = tb;
+ inet_bind_hash(child, tb, port);
spin_unlock(&head->lock);
return 0;
SNMP_MIB_ITEM("TCPMinTTLDrop", LINUX_MIB_TCPMINTTLDROP),
SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP),
SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER),
+ SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW),
SNMP_MIB_SENTINEL
};
static int tcp_retr1_max = 255;
static int ip_local_port_range_min[] = { 1, 1 };
static int ip_local_port_range_max[] = { 65535, 65535 };
+static int tcp_adv_win_scale_min = -31;
+static int tcp_adv_win_scale_max = 31;
/* Update system visible IP port range */
static void set_local_port_range(int range[2])
.data = &sysctl_tcp_adv_win_scale,
.maxlen = sizeof(int),
.mode = 0644,
- .proc_handler = proc_dointvec
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &tcp_adv_win_scale_min,
+ .extra2 = &tcp_adv_win_scale_max,
},
{
.procname = "tcp_tw_reuse",
/* Values greater than interface MTU won't take effect. However
* at the point when this call is done we typically don't yet
* know which interface is going to be used */
- if (val < 64 || val > MAX_TCP_WINDOW) {
+ if (val < TCP_MIN_MSS || val > MAX_TCP_WINDOW) {
err = -EINVAL;
break;
}
}
get_sk:
sk_nulls_for_each_from(sk, node) {
- if (sk->sk_family == st->family && net_eq(sock_net(sk), net)) {
+ if (!net_eq(sock_net(sk), net))
+ continue;
+ if (sk->sk_family == st->family) {
cur = sk;
goto out;
}
* socket up. We've got bigger problems than
* non-graceful socket closings.
*/
- LIMIT_NETDEBUG(KERN_INFO "TCP: time wait bucket table overflow\n");
+ NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPTIMEWAITOVERFLOW);
}
tcp_update_metrics(sk);
/* when initializing use the value from init_rcv_wnd
* rather than the default from above
*/
- if (init_rcv_wnd &&
- (*rcv_wnd > init_rcv_wnd * mss))
- *rcv_wnd = init_rcv_wnd * mss;
- else if (*rcv_wnd > init_cwnd * mss)
- *rcv_wnd = init_cwnd * mss;
+ if (init_rcv_wnd)
+ *rcv_wnd = min(*rcv_wnd, init_rcv_wnd * mss);
+ else
+ *rcv_wnd = min(*rcv_wnd, init_cwnd * mss);
}
/* Set the clamp no higher than max representable value */
*/
static u8 tcp_cookie_size_check(u8 desired)
{
- if (desired > 0) {
+ int cookie_size;
+
+ if (desired > 0)
/* previously specified */
return desired;
- }
- if (sysctl_tcp_cookie_size <= 0) {
+
+ cookie_size = ACCESS_ONCE(sysctl_tcp_cookie_size);
+ if (cookie_size <= 0)
/* no default specified */
return 0;
- }
- if (sysctl_tcp_cookie_size <= TCP_COOKIE_MIN) {
+
+ if (cookie_size <= TCP_COOKIE_MIN)
/* value too small, specify minimum */
return TCP_COOKIE_MIN;
- }
- if (sysctl_tcp_cookie_size >= TCP_COOKIE_MAX) {
+
+ if (cookie_size >= TCP_COOKIE_MAX)
/* value too large, specify maximum */
return TCP_COOKIE_MAX;
- }
- if (0x1 & sysctl_tcp_cookie_size) {
+
+ if (cookie_size & 1)
/* 8-bit multiple, illegal, fix it */
- return (u8)(sysctl_tcp_cookie_size + 0x1);
- }
- return (u8)sysctl_tcp_cookie_size;
+ cookie_size++;
+
+ return (u8)cookie_size;
}
/* Write previously computed TCP options to the packet.
struct tcp_sock *tp = tcp_sk(sk);
const struct inet_connection_sock *icsk = inet_csk(sk);
u32 send_win, cong_win, limit, in_flight;
+ int win_divisor;
if (TCP_SKB_CB(skb)->flags & TCPHDR_FIN)
goto send_now;
if ((skb != tcp_write_queue_tail(sk)) && (limit >= skb->len))
goto send_now;
- if (sysctl_tcp_tso_win_divisor) {
+ win_divisor = ACCESS_ONCE(sysctl_tcp_tso_win_divisor);
+ if (win_divisor) {
u32 chunk = min(tp->snd_wnd, tp->snd_cwnd * tp->mss_cache);
/* If at least some fraction of a window is available,
* just use it.
*/
- chunk /= sysctl_tcp_tso_win_divisor;
+ chunk /= win_divisor;
if (limit >= chunk)
goto send_now;
} else {
kfree_skb(skb);
goto errout;
}
- rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFADDR, NULL, GFP_ATOMIC);
+ rtnl_notify(skb, net, 0, RTNLGRP_IPV6_IFINFO, NULL, GFP_ATOMIC);
return;
errout:
if (err < 0)
- rtnl_set_sk_err(net, RTNLGRP_IPV6_IFADDR, err);
+ rtnl_set_sk_err(net, RTNLGRP_IPV6_IFINFO, err);
}
static inline size_t inet6_prefix_nlmsg_size(void)
sizeof (struct ipv6hdr);
dev->mtu = rt->rt6i_dev->mtu - sizeof (struct ipv6hdr);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
if (dev->mtu < IPV6_MIN_MTU)
dev->mtu = IPV6_MIN_MTU;
static void ip6_tnl_dev_setup(struct net_device *dev)
{
+ struct ip6_tnl *t;
+
dev->netdev_ops = &ip6_tnl_netdev_ops;
dev->destructor = ip6_dev_free;
dev->type = ARPHRD_TUNNEL6;
dev->hard_header_len = LL_MAX_HEADER + sizeof (struct ipv6hdr);
dev->mtu = ETH_DATA_LEN - sizeof (struct ipv6hdr);
+ t = netdev_priv(dev);
+ if (!(t->parms.flags & IP6_TNL_F_IGN_ENCAP_LIMIT))
+ dev->mtu-=8;
dev->flags |= IFF_NOARP;
dev->addr_len = sizeof(struct in6_addr);
dev->features |= NETIF_F_NETNS_LOCAL;
return 0;
}
- icmp_send(skb, ICMP_DEST_UNREACH, ICMP_PORT_UNREACH, 0);
+ /* no tunnel matched, let upstream know, ipsec may handle it */
rcu_read_unlock();
+ return 1;
out:
kfree_skb(skb);
return 0;
MODULE_AUTHOR("James Chapman <jchapman@katalix.com>");
MODULE_DESCRIPTION("L2TP over IP");
MODULE_VERSION("1.0");
-MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, SOCK_DGRAM, IPPROTO_L2TP);
+
+/* Use the value of SOCK_DGRAM (2) directory, because __stringify does't like
+ * enums
+ */
+MODULE_ALIAS_NET_PF_PROTO_TYPE(PF_INET, 2, IPPROTO_L2TP);
goto out;
rc = -ENODEV;
rtnl_lock();
+ rcu_read_lock();
if (sk->sk_bound_dev_if) {
- llc->dev = dev_get_by_index(&init_net, sk->sk_bound_dev_if);
+ llc->dev = dev_get_by_index_rcu(&init_net, sk->sk_bound_dev_if);
if (llc->dev) {
if (!addr->sllc_arphrd)
addr->sllc_arphrd = llc->dev->type;
!llc_mac_match(addr->sllc_mac,
llc->dev->dev_addr)) {
rc = -EINVAL;
- dev_put(llc->dev);
llc->dev = NULL;
}
}
} else
llc->dev = dev_getbyhwaddr(&init_net, addr->sllc_arphrd,
addr->sllc_mac);
+ rcu_read_unlock();
rtnl_unlock();
if (!llc->dev)
goto out;
config MAC80211_LEDS
bool "Enable LED triggers"
depends on MAC80211
- select NEW_LEDS
+ depends on LEDS_CLASS
select LEDS_TRIGGERS
---help---
This option enables a few LED triggers for different
break;
case cpu_to_le16(IEEE80211_STYPE_DEAUTH):
case cpu_to_le16(IEEE80211_STYPE_DISASSOC):
+ if (is_multicast_ether_addr(mgmt->da) &&
+ !is_broadcast_ether_addr(mgmt->da))
+ return RX_DROP_MONITOR;
+
/* process only for station */
if (sdata->vif.type != NL80211_IFTYPE_STATION)
return RX_DROP_MONITOR;
if (ieee80211_prepare_and_rx_handle(&rx, skb, true))
return;
+ goto out;
}
}
return;
}
+ out:
dev_kfree_skb(skb);
}
list) {
if (!ieee80211_sdata_running(tmp_sdata))
continue;
- if (tmp_sdata->vif.type != NL80211_IFTYPE_AP)
+ if (tmp_sdata->vif.type ==
+ NL80211_IFTYPE_MONITOR ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_AP_VLAN ||
+ tmp_sdata->vif.type ==
+ NL80211_IFTYPE_WDS)
continue;
if (compare_ether_addr(tmp_sdata->vif.addr,
hdr->addr2) == 0) {
int nh_pos, h_pos;
struct sta_info *sta = NULL;
u32 sta_flags = 0;
+ struct sk_buff *tmp_skb;
if (unlikely(skb->len < ETH_HLEN)) {
ret = NETDEV_TX_OK;
goto fail;
}
- nh_pos = skb_network_header(skb) - skb->data;
- h_pos = skb_transport_header(skb) - skb->data;
-
/* convert Ethernet header to proper 802.11 header (based on
* operation mode) */
ethertype = (skb->data[12] << 8) | skb->data[13];
goto fail;
}
+ /*
+ * If the skb is shared we need to obtain our own copy.
+ */
+ if (skb_shared(skb)) {
+ tmp_skb = skb;
+ skb = skb_copy(skb, GFP_ATOMIC);
+ kfree_skb(tmp_skb);
+
+ if (!skb) {
+ ret = NETDEV_TX_OK;
+ goto fail;
+ }
+ }
+
hdr.frame_control = fc;
hdr.duration_id = 0;
hdr.seq_ctrl = 0;
encaps_len = 0;
}
+ nh_pos = skb_network_header(skb) - skb->data;
+ h_pos = skb_transport_header(skb) - skb->data;
+
skb_pull(skb, skip_header_bytes);
nh_pos -= skip_header_bytes;
h_pos -= skip_header_bytes;
struct sctp_association *asoc = NULL;
struct sctp_setpeerprim prim;
struct sctp_chunk *chunk;
+ struct sctp_af *af;
int err;
sp = sctp_sk(sk);
if (!sctp_state(asoc, ESTABLISHED))
return -ENOTCONN;
+ af = sctp_get_af_specific(prim.sspp_addr.ss_family);
+ if (!af)
+ return -EINVAL;
+
+ if (!af->addr_valid((union sctp_addr *)&prim.sspp_addr, sp, NULL))
+ return -EADDRNOTAVAIL;
+
if (!sctp_assoc_lookup_laddr(asoc, (union sctp_addr *)&prim.sspp_addr))
return -EADDRNOTAVAIL;
return ret;
}
+/**
+ * kernel_recvmsg - Receive a message from a socket (kernel space)
+ * @sock: The socket to receive the message from
+ * @msg: Received message
+ * @vec: Input s/g array for message data
+ * @num: Size of input s/g array
+ * @size: Number of bytes to read
+ * @flags: Message flags (MSG_DONTWAIT, etc...)
+ *
+ * On return the msg structure contains the scatter/gather array passed in the
+ * vec argument. The array is modified so that it consists of the unfilled
+ * portion of the original array.
+ *
+ * The returned value is the total number of bytes received, or an error.
+ */
int kernel_recvmsg(struct socket *sock, struct msghdr *msg,
struct kvec *vec, size_t num, size_t size, int flags)
{
spin_lock(&svc_xprt_class_lock);
list_for_each_entry(xcl, &svc_xprt_class_list, xcl_list) {
struct svc_xprt *newxprt;
+ unsigned short newport;
if (strcmp(xprt_name, xcl->xcl_name))
continue;
spin_lock_bh(&serv->sv_lock);
list_add(&newxprt->xpt_list, &serv->sv_permsocks);
spin_unlock_bh(&serv->sv_lock);
+ newport = svc_xprt_local_port(newxprt);
clear_bit(XPT_BUSY, &newxprt->xpt_flags);
- return svc_xprt_local_port(newxprt);
+ return newport;
}
err:
spin_unlock(&svc_xprt_class_lock);
{
BUG_ON(!test_bit(XPT_BUSY, &xprt->xpt_flags));
xprt->xpt_pool = NULL;
+ /* As soon as we clear busy, the xprt could be closed and
+ * 'put', so we need a reference to call svc_xprt_enqueue with:
+ */
+ svc_xprt_get(xprt);
clear_bit(XPT_BUSY, &xprt->xpt_flags);
svc_xprt_enqueue(xprt);
+ svc_xprt_put(xprt);
}
EXPORT_SYMBOL_GPL(svc_xprt_received);
sock_wfree(skb);
}
+#define MAX_RECURSION_LEVEL 4
+
static int unix_attach_fds(struct scm_cookie *scm, struct sk_buff *skb)
{
int i;
+ unsigned char max_level = 0;
+ int unix_sock_count = 0;
+
+ for (i = scm->fp->count - 1; i >= 0; i--) {
+ struct sock *sk = unix_get_socket(scm->fp->fp[i]);
+
+ if (sk) {
+ unix_sock_count++;
+ max_level = max(max_level,
+ unix_sk(sk)->recursion_level);
+ }
+ }
+ if (unlikely(max_level > MAX_RECURSION_LEVEL))
+ return -ETOOMANYREFS;
/*
* Need to duplicate file references for the sake of garbage
if (!UNIXCB(skb).fp)
return -ENOMEM;
- for (i = scm->fp->count-1; i >= 0; i--)
- unix_inflight(scm->fp->fp[i]);
- return 0;
+ if (unix_sock_count) {
+ for (i = scm->fp->count - 1; i >= 0; i--)
+ unix_inflight(scm->fp->fp[i]);
+ }
+ return max_level;
}
static int unix_scm_to_skb(struct scm_cookie *scm, struct sk_buff *skb, bool send_fds)
struct sk_buff *skb;
long timeo;
struct scm_cookie tmp_scm;
+ int max_level;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
goto out;
err = unix_scm_to_skb(siocb->scm, skb, true);
- if (err)
+ if (err < 0)
goto out_free;
+ max_level = err + 1;
unix_get_secdata(siocb->scm, skb);
skb_reset_transport_header(skb);
if (sock_flag(other, SOCK_RCVTSTAMP))
__net_timestamp(skb);
skb_queue_tail(&other->sk_receive_queue, skb);
+ if (max_level > unix_sk(other)->recursion_level)
+ unix_sk(other)->recursion_level = max_level;
unix_state_unlock(other);
other->sk_data_ready(other, len);
sock_put(other);
int sent = 0;
struct scm_cookie tmp_scm;
bool fds_sent = false;
+ int max_level;
if (NULL == siocb->scm)
siocb->scm = &tmp_scm;
/* Only send the fds in the first buffer */
err = unix_scm_to_skb(siocb->scm, skb, !fds_sent);
- if (err) {
+ if (err < 0) {
kfree_skb(skb);
goto out_err;
}
+ max_level = err + 1;
fds_sent = true;
err = memcpy_fromiovec(skb_put(skb, size), msg->msg_iov, size);
goto pipe_err_free;
skb_queue_tail(&other->sk_receive_queue, skb);
+ if (max_level > unix_sk(other)->recursion_level)
+ unix_sk(other)->recursion_level = max_level;
unix_state_unlock(other);
other->sk_data_ready(other, size);
sent += size;
unix_state_lock(sk);
skb = skb_dequeue(&sk->sk_receive_queue);
if (skb == NULL) {
+ unix_sk(sk)->recursion_level = 0;
if (copied >= target)
goto unlock;
unsigned int unix_tot_inflight;
-static struct sock *unix_get_socket(struct file *filp)
+struct sock *unix_get_socket(struct file *filp)
{
struct sock *u_sock = NULL;
struct inode *inode = filp->f_path.dentry->d_inode;
}
static bool gc_in_progress = false;
+#define UNIX_INFLIGHT_TRIGGER_GC 16000
void wait_for_unix_gc(void)
{
+ /*
+ * If number of inflight sockets is insane,
+ * force a garbage collect right now.
+ */
+ if (unix_tot_inflight > UNIX_INFLIGHT_TRIGGER_GC && !gc_in_progress)
+ unix_gc();
wait_event(unix_gc_wait, gc_in_progress == false);
}
list_for_each_safe(entry, tmp, &x25_neigh_list) {
nb = list_entry(entry, struct x25_neigh, node);
__x25_remove_neigh(nb);
+ dev_put(nb->dev);
}
write_unlock_bh(&x25_neigh_list_lock);
}
return xc;
error:
- kfree(xc);
+ xfrm_state_put(xc);
return NULL;
}
EXPORT_SYMBOL(xfrm_state_migrate);
struct menu *list;
struct symbol *sym;
struct property *prompt;
+ struct expr *visibility;
struct expr *dep;
unsigned int flags;
char *help;
void menu_add_entry(struct symbol *sym);
void menu_end_entry(void);
void menu_add_dep(struct expr *dep);
+void menu_add_visibility(struct expr *dep);
struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep);
struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep);
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep);
return menu_add_prop(type, prompt, NULL, dep);
}
+void menu_add_visibility(struct expr *expr)
+{
+ current_entry->visibility = expr_alloc_and(current_entry->visibility,
+ expr);
+}
+
void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep)
{
menu_add_prop(type, NULL, expr, dep);
if (!menu->prompt)
return false;
+ if (menu->visibility) {
+ if (expr_calc_value(menu->visibility) == no)
+ return no;
+ }
+
sym = menu->sym;
if (sym) {
sym_calc_value(sym);
string, T_TYPE, TF_COMMAND, S_STRING
select, T_SELECT, TF_COMMAND
range, T_RANGE, TF_COMMAND
+visible, T_VISIBLE, TF_COMMAND
option, T_OPTION, TF_COMMAND
on, T_ON, TF_PARAM
modules, T_OPT_MODULES, TF_OPTION
struct kconf_id;
static struct kconf_id *kconf_id_lookup(register const char *str, register unsigned int len);
-/* maximum key range = 47, duplicates = 0 */
+/* maximum key range = 50, duplicates = 0 */
#ifdef __GNUC__
__inline
{
static unsigned char asso_values[] =
{
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 11, 5,
- 0, 0, 5, 49, 5, 20, 49, 49, 5, 20,
- 5, 0, 30, 49, 0, 15, 0, 10, 0, 49,
- 25, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49, 49, 49, 49, 49,
- 49, 49, 49, 49, 49, 49
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 40, 5,
+ 0, 0, 5, 52, 0, 20, 52, 52, 10, 20,
+ 5, 0, 35, 52, 0, 30, 0, 15, 0, 52,
+ 15, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52, 52, 52, 52, 52,
+ 52, 52, 52, 52, 52, 52
};
register int hval = len;
char kconf_id_strings_str12[sizeof("default")];
char kconf_id_strings_str13[sizeof("def_bool")];
char kconf_id_strings_str14[sizeof("help")];
- char kconf_id_strings_str15[sizeof("bool")];
char kconf_id_strings_str16[sizeof("config")];
char kconf_id_strings_str17[sizeof("def_tristate")];
- char kconf_id_strings_str18[sizeof("boolean")];
+ char kconf_id_strings_str18[sizeof("hex")];
char kconf_id_strings_str19[sizeof("defconfig_list")];
- char kconf_id_strings_str21[sizeof("string")];
char kconf_id_strings_str22[sizeof("if")];
char kconf_id_strings_str23[sizeof("int")];
- char kconf_id_strings_str26[sizeof("select")];
char kconf_id_strings_str27[sizeof("modules")];
char kconf_id_strings_str28[sizeof("tristate")];
char kconf_id_strings_str29[sizeof("menu")];
- char kconf_id_strings_str31[sizeof("source")];
char kconf_id_strings_str32[sizeof("comment")];
- char kconf_id_strings_str33[sizeof("hex")];
char kconf_id_strings_str35[sizeof("menuconfig")];
- char kconf_id_strings_str36[sizeof("prompt")];
- char kconf_id_strings_str37[sizeof("depends")];
+ char kconf_id_strings_str36[sizeof("string")];
+ char kconf_id_strings_str37[sizeof("visible")];
+ char kconf_id_strings_str41[sizeof("prompt")];
+ char kconf_id_strings_str42[sizeof("depends")];
+ char kconf_id_strings_str44[sizeof("bool")];
+ char kconf_id_strings_str46[sizeof("select")];
+ char kconf_id_strings_str47[sizeof("boolean")];
char kconf_id_strings_str48[sizeof("mainmenu")];
+ char kconf_id_strings_str51[sizeof("source")];
};
static struct kconf_id_strings_t kconf_id_strings_contents =
{
"default",
"def_bool",
"help",
- "bool",
"config",
"def_tristate",
- "boolean",
+ "hex",
"defconfig_list",
- "string",
"if",
"int",
- "select",
"modules",
"tristate",
"menu",
- "source",
"comment",
- "hex",
"menuconfig",
+ "string",
+ "visible",
"prompt",
"depends",
- "mainmenu"
+ "bool",
+ "select",
+ "boolean",
+ "mainmenu",
+ "source"
};
#define kconf_id_strings ((const char *) &kconf_id_strings_contents)
#ifdef __GNUC__
{
enum
{
- TOTAL_KEYWORDS = 31,
+ TOTAL_KEYWORDS = 32,
MIN_WORD_LENGTH = 2,
MAX_WORD_LENGTH = 14,
MIN_HASH_VALUE = 2,
- MAX_HASH_VALUE = 48
+ MAX_HASH_VALUE = 51
};
static struct kconf_id wordlist[] =
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str12, T_DEFAULT, TF_COMMAND, S_UNKNOWN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str13, T_DEFAULT, TF_COMMAND, S_BOOLEAN},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str14, T_HELP, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str15, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str16, T_CONFIG, TF_COMMAND},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str17, T_DEFAULT, TF_COMMAND, S_TRISTATE},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str18, T_TYPE, TF_COMMAND, S_HEX},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str19, T_OPT_DEFCONFIG_LIST,TF_OPTION},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str21, T_TYPE, TF_COMMAND, S_STRING},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str22, T_IF, TF_COMMAND|TF_PARAM},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str23, T_TYPE, TF_COMMAND, S_INT},
- {-1}, {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str26, T_SELECT, TF_COMMAND},
+ {-1}, {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str27, T_OPT_MODULES, TF_OPTION},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str28, T_TYPE, TF_COMMAND, S_TRISTATE},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str29, T_MENU, TF_COMMAND},
- {-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str31, T_SOURCE, TF_COMMAND},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str32, T_COMMENT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str33, T_TYPE, TF_COMMAND, S_HEX},
- {-1},
+ {-1}, {-1},
{(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str35, T_MENUCONFIG, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_PROMPT, TF_COMMAND},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_DEPENDS, TF_COMMAND},
- {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str36, T_TYPE, TF_COMMAND, S_STRING},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str37, T_VISIBLE, TF_COMMAND},
+ {-1}, {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str41, T_PROMPT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str42, T_DEPENDS, TF_COMMAND},
{-1},
- {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND}
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str44, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str46, T_SELECT, TF_COMMAND},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str47, T_TYPE, TF_COMMAND, S_BOOLEAN},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str48, T_MAINMENU, TF_COMMAND},
+ {-1}, {-1},
+ {(int)(long)&((struct kconf_id_strings_t *)0)->kconf_id_strings_str51, T_SOURCE, TF_COMMAND}
};
if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH)
T_DEFAULT = 275,
T_SELECT = 276,
T_RANGE = 277,
- T_OPTION = 278,
- T_ON = 279,
- T_WORD = 280,
- T_WORD_QUOTE = 281,
- T_UNEQUAL = 282,
- T_CLOSE_PAREN = 283,
- T_OPEN_PAREN = 284,
- T_EOL = 285,
- T_OR = 286,
- T_AND = 287,
- T_EQUAL = 288,
- T_NOT = 289
+ T_VISIBLE = 278,
+ T_OPTION = 279,
+ T_ON = 280,
+ T_WORD = 281,
+ T_WORD_QUOTE = 282,
+ T_UNEQUAL = 283,
+ T_CLOSE_PAREN = 284,
+ T_OPEN_PAREN = 285,
+ T_EOL = 286,
+ T_OR = 287,
+ T_AND = 288,
+ T_EQUAL = 289,
+ T_NOT = 290
};
#endif
/* YYFINAL -- State number of the termination state. */
#define YYFINAL 11
/* YYLAST -- Last index in YYTABLE. */
-#define YYLAST 277
+#define YYLAST 290
/* YYNTOKENS -- Number of terminals. */
-#define YYNTOKENS 35
+#define YYNTOKENS 36
/* YYNNTS -- Number of nonterminals. */
-#define YYNNTS 48
+#define YYNNTS 50
/* YYNRULES -- Number of rules. */
-#define YYNRULES 113
+#define YYNRULES 118
/* YYNRULES -- Number of states. */
-#define YYNSTATES 185
+#define YYNSTATES 191
/* YYTRANSLATE(YYLEX) -- Bison symbol number corresponding to YYLEX. */
#define YYUNDEFTOK 2
-#define YYMAXUTOK 289
+#define YYMAXUTOK 290
#define YYTRANSLATE(YYX) \
((unsigned int) (YYX) <= YYMAXUTOK ? yytranslate[YYX] : YYUNDEFTOK)
2, 2, 2, 2, 2, 2, 1, 2, 3, 4,
5, 6, 7, 8, 9, 10, 11, 12, 13, 14,
15, 16, 17, 18, 19, 20, 21, 22, 23, 24,
- 25, 26, 27, 28, 29, 30, 31, 32, 33, 34
+ 25, 26, 27, 28, 29, 30, 31, 32, 33, 34,
+ 35
};
#if YYDEBUG
{
0, 0, 3, 6, 8, 11, 13, 14, 17, 20,
23, 26, 31, 36, 40, 42, 44, 46, 48, 50,
- 52, 54, 56, 58, 60, 62, 64, 66, 70, 73,
- 77, 80, 84, 87, 88, 91, 94, 97, 100, 103,
- 106, 110, 115, 120, 125, 131, 135, 136, 140, 141,
- 144, 148, 151, 153, 157, 158, 161, 164, 167, 170,
- 173, 178, 182, 185, 190, 191, 194, 198, 200, 204,
- 205, 208, 211, 214, 218, 222, 225, 227, 231, 232,
- 235, 238, 241, 245, 249, 252, 255, 258, 259, 262,
- 265, 268, 273, 274, 277, 279, 281, 284, 287, 290,
- 292, 295, 296, 299, 301, 305, 309, 313, 316, 320,
- 324, 326, 328, 329
+ 52, 54, 56, 58, 60, 62, 64, 66, 68, 72,
+ 75, 79, 82, 86, 89, 90, 93, 96, 99, 102,
+ 105, 108, 112, 117, 122, 127, 133, 137, 138, 142,
+ 143, 146, 150, 153, 155, 159, 160, 163, 166, 169,
+ 172, 175, 180, 184, 187, 192, 193, 196, 200, 202,
+ 206, 207, 210, 213, 216, 220, 224, 228, 230, 234,
+ 235, 238, 241, 244, 248, 252, 255, 258, 261, 262,
+ 265, 268, 271, 276, 277, 280, 283, 286, 287, 290,
+ 292, 294, 297, 300, 303, 305, 308, 309, 312, 314,
+ 318, 322, 326, 329, 333, 337, 339, 341, 342
};
/* YYRHS -- A `-1'-separated list of the rules' RHS. */
static const yytype_int8 yyrhs[] =
{
- 36, 0, -1, 78, 37, -1, 37, -1, 62, 38,
- -1, 38, -1, -1, 38, 40, -1, 38, 54, -1,
- 38, 66, -1, 38, 77, -1, 38, 25, 1, 30,
- -1, 38, 39, 1, 30, -1, 38, 1, 30, -1,
+ 37, 0, -1, 81, 38, -1, 38, -1, 63, 39,
+ -1, 39, -1, -1, 39, 41, -1, 39, 55, -1,
+ 39, 67, -1, 39, 80, -1, 39, 26, 1, 31,
+ -1, 39, 40, 1, 31, -1, 39, 1, 31, -1,
16, -1, 18, -1, 19, -1, 21, -1, 17, -1,
- 22, -1, 20, -1, 30, -1, 60, -1, 70, -1,
- 43, -1, 45, -1, 68, -1, 25, 1, 30, -1,
- 1, 30, -1, 10, 25, 30, -1, 42, 46, -1,
- 11, 25, 30, -1, 44, 46, -1, -1, 46, 47,
- -1, 46, 48, -1, 46, 74, -1, 46, 72, -1,
- 46, 41, -1, 46, 30, -1, 19, 75, 30, -1,
- 18, 76, 79, 30, -1, 20, 80, 79, 30, -1,
- 21, 25, 79, 30, -1, 22, 81, 81, 79, 30,
- -1, 23, 49, 30, -1, -1, 49, 25, 50, -1,
- -1, 33, 76, -1, 7, 82, 30, -1, 51, 55,
- -1, 77, -1, 52, 57, 53, -1, -1, 55, 56,
- -1, 55, 74, -1, 55, 72, -1, 55, 30, -1,
- 55, 41, -1, 18, 76, 79, 30, -1, 19, 75,
- 30, -1, 17, 30, -1, 20, 25, 79, 30, -1,
- -1, 57, 40, -1, 14, 80, 78, -1, 77, -1,
- 58, 61, 59, -1, -1, 61, 40, -1, 61, 66,
- -1, 61, 54, -1, 3, 76, 78, -1, 4, 76,
- 30, -1, 63, 73, -1, 77, -1, 64, 67, 65,
- -1, -1, 67, 40, -1, 67, 66, -1, 67, 54,
- -1, 6, 76, 30, -1, 9, 76, 30, -1, 69,
- 73, -1, 12, 30, -1, 71, 13, -1, -1, 73,
- 74, -1, 73, 30, -1, 73, 41, -1, 16, 24,
- 80, 30, -1, -1, 76, 79, -1, 25, -1, 26,
- -1, 5, 30, -1, 8, 30, -1, 15, 30, -1,
- 30, -1, 78, 30, -1, -1, 14, 80, -1, 81,
- -1, 81, 33, 81, -1, 81, 27, 81, -1, 29,
- 80, 28, -1, 34, 80, -1, 80, 31, 80, -1,
- 80, 32, 80, -1, 25, -1, 26, -1, -1, 25,
- -1
+ 22, -1, 20, -1, 23, -1, 31, -1, 61, -1,
+ 71, -1, 44, -1, 46, -1, 69, -1, 26, 1,
+ 31, -1, 1, 31, -1, 10, 26, 31, -1, 43,
+ 47, -1, 11, 26, 31, -1, 45, 47, -1, -1,
+ 47, 48, -1, 47, 49, -1, 47, 75, -1, 47,
+ 73, -1, 47, 42, -1, 47, 31, -1, 19, 78,
+ 31, -1, 18, 79, 82, 31, -1, 20, 83, 82,
+ 31, -1, 21, 26, 82, 31, -1, 22, 84, 84,
+ 82, 31, -1, 24, 50, 31, -1, -1, 50, 26,
+ 51, -1, -1, 34, 79, -1, 7, 85, 31, -1,
+ 52, 56, -1, 80, -1, 53, 58, 54, -1, -1,
+ 56, 57, -1, 56, 75, -1, 56, 73, -1, 56,
+ 31, -1, 56, 42, -1, 18, 79, 82, 31, -1,
+ 19, 78, 31, -1, 17, 31, -1, 20, 26, 82,
+ 31, -1, -1, 58, 41, -1, 14, 83, 81, -1,
+ 80, -1, 59, 62, 60, -1, -1, 62, 41, -1,
+ 62, 67, -1, 62, 55, -1, 3, 79, 81, -1,
+ 4, 79, 31, -1, 64, 76, 74, -1, 80, -1,
+ 65, 68, 66, -1, -1, 68, 41, -1, 68, 67,
+ -1, 68, 55, -1, 6, 79, 31, -1, 9, 79,
+ 31, -1, 70, 74, -1, 12, 31, -1, 72, 13,
+ -1, -1, 74, 75, -1, 74, 31, -1, 74, 42,
+ -1, 16, 25, 83, 31, -1, -1, 76, 77, -1,
+ 76, 31, -1, 23, 82, -1, -1, 79, 82, -1,
+ 26, -1, 27, -1, 5, 31, -1, 8, 31, -1,
+ 15, 31, -1, 31, -1, 81, 31, -1, -1, 14,
+ 83, -1, 84, -1, 84, 34, 84, -1, 84, 28,
+ 84, -1, 30, 83, 29, -1, 35, 83, -1, 83,
+ 32, 83, -1, 83, 33, 83, -1, 26, -1, 27,
+ -1, -1, 26, -1
};
/* YYRLINE[YYN] -- source line where rule number YYN was defined. */
static const yytype_uint16 yyrline[] =
{
- 0, 107, 107, 107, 109, 109, 111, 113, 114, 115,
- 116, 117, 118, 122, 126, 126, 126, 126, 126, 126,
- 126, 130, 131, 132, 133, 134, 135, 139, 140, 146,
- 154, 160, 168, 178, 180, 181, 182, 183, 184, 185,
- 188, 196, 202, 212, 218, 224, 227, 229, 240, 241,
- 246, 255, 260, 268, 271, 273, 274, 275, 276, 277,
- 280, 286, 297, 303, 313, 315, 320, 328, 336, 339,
- 341, 342, 343, 348, 355, 362, 367, 375, 378, 380,
- 381, 382, 385, 393, 400, 407, 413, 420, 422, 423,
- 424, 427, 435, 437, 442, 443, 446, 447, 448, 452,
- 453, 456, 457, 460, 461, 462, 463, 464, 465, 466,
- 469, 470, 473, 474
+ 0, 108, 108, 108, 110, 110, 112, 114, 115, 116,
+ 117, 118, 119, 123, 127, 127, 127, 127, 127, 127,
+ 127, 127, 131, 132, 133, 134, 135, 136, 140, 141,
+ 147, 155, 161, 169, 179, 181, 182, 183, 184, 185,
+ 186, 189, 197, 203, 213, 219, 225, 228, 230, 241,
+ 242, 247, 256, 261, 269, 272, 274, 275, 276, 277,
+ 278, 281, 287, 298, 304, 314, 316, 321, 329, 337,
+ 340, 342, 343, 344, 349, 356, 363, 368, 376, 379,
+ 381, 382, 383, 386, 394, 401, 408, 414, 421, 423,
+ 424, 425, 428, 436, 438, 439, 442, 449, 451, 456,
+ 457, 460, 461, 462, 466, 467, 470, 471, 474, 475,
+ 476, 477, 478, 479, 480, 483, 484, 487, 488
};
#endif
"T_SOURCE", "T_CHOICE", "T_ENDCHOICE", "T_COMMENT", "T_CONFIG",
"T_MENUCONFIG", "T_HELP", "T_HELPTEXT", "T_IF", "T_ENDIF", "T_DEPENDS",
"T_OPTIONAL", "T_PROMPT", "T_TYPE", "T_DEFAULT", "T_SELECT", "T_RANGE",
- "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
+ "T_VISIBLE", "T_OPTION", "T_ON", "T_WORD", "T_WORD_QUOTE", "T_UNEQUAL",
"T_CLOSE_PAREN", "T_OPEN_PAREN", "T_EOL", "T_OR", "T_AND", "T_EQUAL",
"T_NOT", "$accept", "input", "start", "stmt_list", "option_name",
"common_stmt", "option_error", "config_entry_start", "config_stmt",
"if_entry", "if_end", "if_stmt", "if_block", "mainmenu_stmt", "menu",
"menu_entry", "menu_end", "menu_stmt", "menu_block", "source_stmt",
"comment", "comment_stmt", "help_start", "help", "depends_list",
- "depends", "prompt_stmt_opt", "prompt", "end", "nl", "if_expr", "expr",
- "symbol", "word_opt", 0
+ "depends", "visibility_list", "visible", "prompt_stmt_opt", "prompt",
+ "end", "nl", "if_expr", "expr", "symbol", "word_opt", 0
};
#endif
0, 256, 257, 258, 259, 260, 261, 262, 263, 264,
265, 266, 267, 268, 269, 270, 271, 272, 273, 274,
275, 276, 277, 278, 279, 280, 281, 282, 283, 284,
- 285, 286, 287, 288, 289
+ 285, 286, 287, 288, 289, 290
};
# endif
/* YYR1[YYN] -- Symbol number of symbol that rule YYN derives. */
static const yytype_uint8 yyr1[] =
{
- 0, 35, 36, 36, 37, 37, 38, 38, 38, 38,
- 38, 38, 38, 38, 39, 39, 39, 39, 39, 39,
- 39, 40, 40, 40, 40, 40, 40, 41, 41, 42,
- 43, 44, 45, 46, 46, 46, 46, 46, 46, 46,
- 47, 47, 47, 47, 47, 48, 49, 49, 50, 50,
- 51, 52, 53, 54, 55, 55, 55, 55, 55, 55,
- 56, 56, 56, 56, 57, 57, 58, 59, 60, 61,
- 61, 61, 61, 62, 63, 64, 65, 66, 67, 67,
- 67, 67, 68, 69, 70, 71, 72, 73, 73, 73,
- 73, 74, 75, 75, 76, 76, 77, 77, 77, 78,
- 78, 79, 79, 80, 80, 80, 80, 80, 80, 80,
- 81, 81, 82, 82
+ 0, 36, 37, 37, 38, 38, 39, 39, 39, 39,
+ 39, 39, 39, 39, 40, 40, 40, 40, 40, 40,
+ 40, 40, 41, 41, 41, 41, 41, 41, 42, 42,
+ 43, 44, 45, 46, 47, 47, 47, 47, 47, 47,
+ 47, 48, 48, 48, 48, 48, 49, 50, 50, 51,
+ 51, 52, 53, 54, 55, 56, 56, 56, 56, 56,
+ 56, 57, 57, 57, 57, 58, 58, 59, 60, 61,
+ 62, 62, 62, 62, 63, 64, 65, 66, 67, 68,
+ 68, 68, 68, 69, 70, 71, 72, 73, 74, 74,
+ 74, 74, 75, 76, 76, 76, 77, 78, 78, 79,
+ 79, 80, 80, 80, 81, 81, 82, 82, 83, 83,
+ 83, 83, 83, 83, 83, 84, 84, 85, 85
};
/* YYR2[YYN] -- Number of symbols composing right hand side of rule YYN. */
{
0, 2, 2, 1, 2, 1, 0, 2, 2, 2,
2, 4, 4, 3, 1, 1, 1, 1, 1, 1,
- 1, 1, 1, 1, 1, 1, 1, 3, 2, 3,
- 2, 3, 2, 0, 2, 2, 2, 2, 2, 2,
- 3, 4, 4, 4, 5, 3, 0, 3, 0, 2,
- 3, 2, 1, 3, 0, 2, 2, 2, 2, 2,
- 4, 3, 2, 4, 0, 2, 3, 1, 3, 0,
- 2, 2, 2, 3, 3, 2, 1, 3, 0, 2,
- 2, 2, 3, 3, 2, 2, 2, 0, 2, 2,
- 2, 4, 0, 2, 1, 1, 2, 2, 2, 1,
- 2, 0, 2, 1, 3, 3, 3, 2, 3, 3,
- 1, 1, 0, 1
+ 1, 1, 1, 1, 1, 1, 1, 1, 3, 2,
+ 3, 2, 3, 2, 0, 2, 2, 2, 2, 2,
+ 2, 3, 4, 4, 4, 5, 3, 0, 3, 0,
+ 2, 3, 2, 1, 3, 0, 2, 2, 2, 2,
+ 2, 4, 3, 2, 4, 0, 2, 3, 1, 3,
+ 0, 2, 2, 2, 3, 3, 3, 1, 3, 0,
+ 2, 2, 2, 3, 3, 2, 2, 2, 0, 2,
+ 2, 2, 4, 0, 2, 2, 2, 0, 2, 1,
+ 1, 2, 2, 2, 1, 2, 0, 2, 1, 3,
+ 3, 3, 2, 3, 3, 1, 1, 0, 1
};
/* YYDEFACT[STATE-NAME] -- Default rule to reduce with in state
means the default is an error. */
static const yytype_uint8 yydefact[] =
{
- 6, 0, 99, 0, 3, 0, 6, 6, 94, 95,
- 0, 1, 0, 0, 0, 0, 112, 0, 0, 0,
+ 6, 0, 104, 0, 3, 0, 6, 6, 99, 100,
+ 0, 1, 0, 0, 0, 0, 117, 0, 0, 0,
0, 0, 0, 14, 18, 15, 16, 20, 17, 19,
- 0, 21, 0, 7, 33, 24, 33, 25, 54, 64,
- 8, 69, 22, 87, 78, 9, 26, 87, 23, 10,
- 0, 100, 2, 73, 13, 0, 96, 0, 113, 0,
- 97, 0, 0, 0, 110, 111, 0, 0, 0, 103,
- 98, 0, 0, 0, 0, 0, 0, 0, 0, 0,
- 0, 74, 82, 50, 83, 29, 31, 0, 107, 0,
- 0, 66, 0, 0, 11, 12, 0, 0, 0, 0,
- 92, 0, 0, 0, 46, 0, 39, 38, 34, 35,
- 0, 37, 36, 0, 0, 92, 0, 58, 59, 55,
- 57, 56, 65, 53, 52, 70, 72, 68, 71, 67,
- 89, 90, 88, 79, 81, 77, 80, 76, 106, 108,
- 109, 105, 104, 28, 85, 0, 101, 0, 101, 101,
- 101, 0, 0, 0, 86, 62, 101, 0, 101, 0,
- 0, 0, 40, 93, 0, 0, 101, 48, 45, 27,
- 0, 61, 0, 91, 102, 41, 42, 43, 0, 0,
- 47, 60, 63, 44, 49
+ 21, 0, 22, 0, 7, 34, 25, 34, 26, 55,
+ 65, 8, 70, 23, 93, 79, 9, 27, 88, 24,
+ 10, 0, 105, 2, 74, 13, 0, 101, 0, 118,
+ 0, 102, 0, 0, 0, 115, 116, 0, 0, 0,
+ 108, 103, 0, 0, 0, 0, 0, 0, 0, 88,
+ 0, 0, 75, 83, 51, 84, 30, 32, 0, 112,
+ 0, 0, 67, 0, 0, 11, 12, 0, 0, 0,
+ 0, 97, 0, 0, 0, 47, 0, 40, 39, 35,
+ 36, 0, 38, 37, 0, 0, 97, 0, 59, 60,
+ 56, 58, 57, 66, 54, 53, 71, 73, 69, 72,
+ 68, 106, 95, 0, 94, 80, 82, 78, 81, 77,
+ 90, 91, 89, 111, 113, 114, 110, 109, 29, 86,
+ 0, 106, 0, 106, 106, 106, 0, 0, 0, 87,
+ 63, 106, 0, 106, 0, 96, 0, 0, 41, 98,
+ 0, 0, 106, 49, 46, 28, 0, 62, 0, 107,
+ 92, 42, 43, 44, 0, 0, 48, 61, 64, 45,
+ 50
};
/* YYDEFGOTO[NTERM-NUM]. */
static const yytype_int16 yydefgoto[] =
{
- -1, 3, 4, 5, 32, 33, 107, 34, 35, 36,
- 37, 73, 108, 109, 152, 180, 38, 39, 123, 40,
- 75, 119, 76, 41, 127, 42, 77, 6, 43, 44,
- 135, 45, 79, 46, 47, 48, 110, 111, 78, 112,
- 147, 148, 49, 7, 161, 68, 69, 59
+ -1, 3, 4, 5, 33, 34, 108, 35, 36, 37,
+ 38, 74, 109, 110, 157, 186, 39, 40, 124, 41,
+ 76, 120, 77, 42, 128, 43, 78, 6, 44, 45,
+ 137, 46, 80, 47, 48, 49, 111, 112, 81, 113,
+ 79, 134, 152, 153, 50, 7, 165, 69, 70, 60
};
/* YYPACT[STATE-NUM] -- Index in YYTABLE of the portion describing
STATE-NUM. */
-#define YYPACT_NINF -89
+#define YYPACT_NINF -90
static const yytype_int16 yypact[] =
{
- 3, 4, -89, 20, -89, 100, -89, 7, -89, -89,
- -8, -89, 17, 4, 28, 4, 37, 36, 4, 68,
- 87, -18, 69, -89, -89, -89, -89, -89, -89, -89,
- 128, -89, 138, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- 127, -89, -89, 110, -89, 126, -89, 136, -89, 137,
- -89, 147, 150, 152, -89, -89, -18, -18, 171, -14,
- -89, 153, 157, 34, 67, 180, 233, 220, 207, 220,
- 154, -89, -89, -89, -89, -89, -89, 0, -89, -18,
- -18, 110, 44, 44, -89, -89, 163, 174, 182, 4,
- 4, -18, 194, 44, -89, 219, -89, -89, -89, -89,
- 223, -89, -89, 203, 4, 4, 215, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, 213,
- -89, -89, -89, -89, -89, -18, 232, 227, 232, -5,
- 232, 44, 35, 234, -89, -89, 232, 235, 232, 224,
- -18, 236, -89, -89, 237, 238, 232, 216, -89, -89,
- 240, -89, 241, -89, 71, -89, -89, -89, 242, 4,
- -89, -89, -89, -89, -89
+ 4, 42, -90, 96, -90, 111, -90, 15, -90, -90,
+ 75, -90, 82, 42, 104, 42, 110, 107, 42, 115,
+ 125, -4, 121, -90, -90, -90, -90, -90, -90, -90,
+ -90, 162, -90, 163, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 139, -90, -90, 138, -90, 142, -90, 143, -90,
+ 152, -90, 164, 167, 168, -90, -90, -4, -4, 77,
+ -18, -90, 177, 185, 33, 71, 195, 247, 236, -2,
+ 236, 171, -90, -90, -90, -90, -90, -90, 41, -90,
+ -4, -4, 138, 97, 97, -90, -90, 186, 187, 194,
+ 42, 42, -4, 196, 97, -90, 219, -90, -90, -90,
+ -90, 210, -90, -90, 204, 42, 42, 199, -90, -90,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, 222, -90, 223, -90, -90, -90, -90, -90, -90,
+ -90, -90, -90, -90, 215, -90, -90, -90, -90, -90,
+ -4, 222, 228, 222, -5, 222, 97, 35, 229, -90,
+ -90, 222, 232, 222, -4, -90, 135, 233, -90, -90,
+ 234, 235, 222, 240, -90, -90, 237, -90, 239, -13,
+ -90, -90, -90, -90, 244, 42, -90, -90, -90, -90,
+ -90
};
/* YYPGOTO[NTERM-NUM]. */
static const yytype_int16 yypgoto[] =
{
- -89, -89, 255, 267, -89, 47, -57, -89, -89, -89,
- -89, 239, -89, -89, -89, -89, -89, -89, -89, 130,
- -89, -89, -89, -89, -89, -89, -89, -89, -89, -89,
- -89, 181, -89, -89, -89, -89, -89, 199, 229, 16,
- 162, -1, 74, -7, 103, -65, -88, -89
+ -90, -90, 269, 271, -90, 23, -70, -90, -90, -90,
+ -90, 243, -90, -90, -90, -90, -90, -90, -90, -48,
+ -90, -90, -90, -90, -90, -90, -90, -90, -90, -90,
+ -90, -20, -90, -90, -90, -90, -90, 206, 205, -68,
+ -90, -90, 169, -1, 27, -7, 118, -66, -89, -90
};
/* YYTABLE[YYPACT[STATE-NUM]]. What to do in state STATE-NUM. If
positive, shift that token. If negative, reduce the rule which
number is the opposite. If zero, do what YYDEFACT says.
If YYTABLE_NINF, syntax error. */
-#define YYTABLE_NINF -85
+#define YYTABLE_NINF -86
static const yytype_int16 yytable[] =
{
- 10, 87, 88, 53, 141, 142, 1, 64, 65, 160,
- 1, 66, 55, 92, 57, 151, 67, 61, 118, 93,
- 11, 131, 2, 131, 139, 140, 89, 90, 138, 8,
- 9, 89, 90, 2, -30, 96, 149, 51, -30, -30,
- -30, -30, -30, -30, -30, -30, 97, 54, -30, -30,
- 98, -30, 99, 100, 101, 102, 103, 104, 56, 105,
- 167, 91, 58, 166, 106, 168, 60, -32, 96, 64,
- 65, -32, -32, -32, -32, -32, -32, -32, -32, 97,
- 159, -32, -32, 98, -32, 99, 100, 101, 102, 103,
- 104, 121, 105, 62, 132, 174, 132, 106, 146, 70,
- -5, 12, 89, 90, 13, 14, 15, 16, 17, 18,
- 19, 20, 63, 156, 21, 22, 23, 24, 25, 26,
- 27, 28, 29, 122, 125, 30, 133, -4, 12, 71,
- 31, 13, 14, 15, 16, 17, 18, 19, 20, 72,
- 51, 21, 22, 23, 24, 25, 26, 27, 28, 29,
- 124, 129, 30, 137, -84, 96, 81, 31, -84, -84,
- -84, -84, -84, -84, -84, -84, 82, 83, -84, -84,
- 98, -84, -84, -84, -84, -84, -84, 84, 184, 105,
- 85, 96, 86, 94, 130, -51, -51, 95, -51, -51,
- -51, -51, 97, 143, -51, -51, 98, 113, 114, 115,
- 116, 2, 89, 90, 144, 105, 145, 126, 96, 134,
- 117, -75, -75, -75, -75, -75, -75, -75, -75, 150,
- 153, -75, -75, 98, 13, 14, 15, 16, 17, 18,
- 19, 20, 105, 155, 21, 22, 154, 130, 14, 15,
- 158, 17, 18, 19, 20, 90, 160, 21, 22, 179,
- 31, 163, 164, 165, 173, 89, 90, 162, 128, 170,
- 136, 172, 52, 31, 169, 171, 175, 176, 177, 178,
- 181, 182, 183, 50, 120, 74, 80, 157
+ 10, 88, 89, 54, 146, 147, 119, 1, 122, 164,
+ 93, 141, 56, 142, 58, 156, 94, 62, 1, 90,
+ 91, 131, 65, 66, 144, 145, 67, 90, 91, 132,
+ 127, 68, 136, -31, 97, 2, 154, -31, -31, -31,
+ -31, -31, -31, -31, -31, 98, 52, -31, -31, 99,
+ -31, 100, 101, 102, 103, 104, -31, 105, 129, 106,
+ 138, 173, 92, 141, 107, 142, 174, 172, 8, 9,
+ 143, -33, 97, 90, 91, -33, -33, -33, -33, -33,
+ -33, -33, -33, 98, 166, -33, -33, 99, -33, 100,
+ 101, 102, 103, 104, -33, 105, 11, 106, 179, 151,
+ 123, 126, 107, 135, 125, 130, 2, 139, 2, 90,
+ 91, -5, 12, 55, 161, 13, 14, 15, 16, 17,
+ 18, 19, 20, 65, 66, 21, 22, 23, 24, 25,
+ 26, 27, 28, 29, 30, 57, 59, 31, 61, -4,
+ 12, 63, 32, 13, 14, 15, 16, 17, 18, 19,
+ 20, 64, 71, 21, 22, 23, 24, 25, 26, 27,
+ 28, 29, 30, 72, 73, 31, 180, 90, 91, 52,
+ 32, -85, 97, 82, 83, -85, -85, -85, -85, -85,
+ -85, -85, -85, 84, 190, -85, -85, 99, -85, -85,
+ -85, -85, -85, -85, -85, 85, 97, 106, 86, 87,
+ -52, -52, 140, -52, -52, -52, -52, 98, 95, -52,
+ -52, 99, 114, 115, 116, 117, 96, 148, 149, 150,
+ 158, 106, 155, 159, 97, 163, 118, -76, -76, -76,
+ -76, -76, -76, -76, -76, 160, 164, -76, -76, 99,
+ 13, 14, 15, 16, 17, 18, 19, 20, 91, 106,
+ 21, 22, 14, 15, 140, 17, 18, 19, 20, 168,
+ 175, 21, 22, 177, 181, 182, 183, 32, 187, 167,
+ 188, 169, 170, 171, 185, 189, 53, 51, 32, 176,
+ 75, 178, 121, 0, 133, 162, 0, 0, 0, 0,
+ 184
};
-static const yytype_uint8 yycheck[] =
+static const yytype_int16 yycheck[] =
{
- 1, 66, 67, 10, 92, 93, 3, 25, 26, 14,
- 3, 29, 13, 27, 15, 103, 34, 18, 75, 33,
- 0, 78, 30, 80, 89, 90, 31, 32, 28, 25,
- 26, 31, 32, 30, 0, 1, 101, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 12, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 23, 30, 25,
- 25, 68, 25, 151, 30, 30, 30, 0, 1, 25,
- 26, 4, 5, 6, 7, 8, 9, 10, 11, 12,
- 145, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 23, 75, 25, 25, 78, 160, 80, 30, 99, 30,
- 0, 1, 31, 32, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 114, 14, 15, 16, 17, 18, 19,
- 20, 21, 22, 76, 77, 25, 79, 0, 1, 1,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 1,
- 30, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 76, 77, 25, 79, 0, 1, 30, 30, 4, 5,
- 6, 7, 8, 9, 10, 11, 30, 30, 14, 15,
- 16, 17, 18, 19, 20, 21, 22, 30, 179, 25,
- 30, 1, 30, 30, 30, 5, 6, 30, 8, 9,
- 10, 11, 12, 30, 14, 15, 16, 17, 18, 19,
- 20, 30, 31, 32, 30, 25, 24, 77, 1, 79,
- 30, 4, 5, 6, 7, 8, 9, 10, 11, 25,
- 1, 14, 15, 16, 4, 5, 6, 7, 8, 9,
- 10, 11, 25, 30, 14, 15, 13, 30, 5, 6,
- 25, 8, 9, 10, 11, 32, 14, 14, 15, 33,
- 30, 148, 149, 150, 30, 31, 32, 30, 77, 156,
- 79, 158, 7, 30, 30, 30, 30, 30, 30, 166,
- 30, 30, 30, 6, 75, 36, 47, 115
+ 1, 67, 68, 10, 93, 94, 76, 3, 76, 14,
+ 28, 81, 13, 81, 15, 104, 34, 18, 3, 32,
+ 33, 23, 26, 27, 90, 91, 30, 32, 33, 31,
+ 78, 35, 80, 0, 1, 31, 102, 4, 5, 6,
+ 7, 8, 9, 10, 11, 12, 31, 14, 15, 16,
+ 17, 18, 19, 20, 21, 22, 23, 24, 78, 26,
+ 80, 26, 69, 133, 31, 133, 31, 156, 26, 27,
+ 29, 0, 1, 32, 33, 4, 5, 6, 7, 8,
+ 9, 10, 11, 12, 150, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 24, 0, 26, 164, 100,
+ 77, 78, 31, 80, 77, 78, 31, 80, 31, 32,
+ 33, 0, 1, 31, 115, 4, 5, 6, 7, 8,
+ 9, 10, 11, 26, 27, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 26, 26, 31, 0,
+ 1, 26, 31, 4, 5, 6, 7, 8, 9, 10,
+ 11, 26, 31, 14, 15, 16, 17, 18, 19, 20,
+ 21, 22, 23, 1, 1, 26, 31, 32, 33, 31,
+ 31, 0, 1, 31, 31, 4, 5, 6, 7, 8,
+ 9, 10, 11, 31, 185, 14, 15, 16, 17, 18,
+ 19, 20, 21, 22, 23, 31, 1, 26, 31, 31,
+ 5, 6, 31, 8, 9, 10, 11, 12, 31, 14,
+ 15, 16, 17, 18, 19, 20, 31, 31, 31, 25,
+ 1, 26, 26, 13, 1, 26, 31, 4, 5, 6,
+ 7, 8, 9, 10, 11, 31, 14, 14, 15, 16,
+ 4, 5, 6, 7, 8, 9, 10, 11, 33, 26,
+ 14, 15, 5, 6, 31, 8, 9, 10, 11, 31,
+ 31, 14, 15, 31, 31, 31, 31, 31, 31, 151,
+ 31, 153, 154, 155, 34, 31, 7, 6, 31, 161,
+ 37, 163, 76, -1, 79, 116, -1, -1, -1, -1,
+ 172
};
/* YYSTOS[STATE-NUM] -- The (internal number of the) accessing
symbol of state STATE-NUM. */
static const yytype_uint8 yystos[] =
{
- 0, 3, 30, 36, 37, 38, 62, 78, 25, 26,
- 76, 0, 1, 4, 5, 6, 7, 8, 9, 10,
+ 0, 3, 31, 37, 38, 39, 63, 81, 26, 27,
+ 79, 0, 1, 4, 5, 6, 7, 8, 9, 10,
11, 14, 15, 16, 17, 18, 19, 20, 21, 22,
- 25, 30, 39, 40, 42, 43, 44, 45, 51, 52,
- 54, 58, 60, 63, 64, 66, 68, 69, 70, 77,
- 38, 30, 37, 78, 30, 76, 30, 76, 25, 82,
- 30, 76, 25, 25, 25, 26, 29, 34, 80, 81,
- 30, 1, 1, 46, 46, 55, 57, 61, 73, 67,
- 73, 30, 30, 30, 30, 30, 30, 80, 80, 31,
- 32, 78, 27, 33, 30, 30, 1, 12, 16, 18,
- 19, 20, 21, 22, 23, 25, 30, 41, 47, 48,
- 71, 72, 74, 17, 18, 19, 20, 30, 41, 56,
- 72, 74, 40, 53, 77, 40, 54, 59, 66, 77,
- 30, 41, 74, 40, 54, 65, 66, 77, 28, 80,
- 80, 81, 81, 30, 30, 24, 76, 75, 76, 80,
- 25, 81, 49, 1, 13, 30, 76, 75, 25, 80,
- 14, 79, 30, 79, 79, 79, 81, 25, 30, 30,
- 79, 30, 79, 30, 80, 30, 30, 30, 79, 33,
- 50, 30, 30, 30, 76
+ 23, 26, 31, 40, 41, 43, 44, 45, 46, 52,
+ 53, 55, 59, 61, 64, 65, 67, 69, 70, 71,
+ 80, 39, 31, 38, 81, 31, 79, 31, 79, 26,
+ 85, 31, 79, 26, 26, 26, 27, 30, 35, 83,
+ 84, 31, 1, 1, 47, 47, 56, 58, 62, 76,
+ 68, 74, 31, 31, 31, 31, 31, 31, 83, 83,
+ 32, 33, 81, 28, 34, 31, 31, 1, 12, 16,
+ 18, 19, 20, 21, 22, 24, 26, 31, 42, 48,
+ 49, 72, 73, 75, 17, 18, 19, 20, 31, 42,
+ 57, 73, 75, 41, 54, 80, 41, 55, 60, 67,
+ 80, 23, 31, 74, 77, 41, 55, 66, 67, 80,
+ 31, 42, 75, 29, 83, 83, 84, 84, 31, 31,
+ 25, 79, 78, 79, 83, 26, 84, 50, 1, 13,
+ 31, 79, 78, 26, 14, 82, 83, 82, 31, 82,
+ 82, 82, 84, 26, 31, 31, 82, 31, 82, 83,
+ 31, 31, 31, 31, 82, 34, 51, 31, 31, 31,
+ 79
};
#define yyerrok (yyerrstatus = 0)
switch (yytype)
{
- case 52: /* "choice_entry" */
+ case 53: /* "choice_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
};
break;
- case 58: /* "if_entry" */
+ case 59: /* "if_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
};
break;
- case 64: /* "menu_entry" */
+ case 65: /* "menu_entry" */
{
fprintf(stderr, "%s:%d: missing end statement for this entry\n",
{ zconf_error("invalid statement"); ;}
break;
- case 27:
+ case 28:
{ zconf_error("unknown option \"%s\"", (yyvsp[(1) - (3)].string)); ;}
break;
- case 28:
+ case 29:
{ zconf_error("invalid option"); ;}
break;
- case 29:
+ case 30:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
;}
break;
- case 30:
+ case 31:
{
menu_end_entry();
;}
break;
- case 31:
+ case 32:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), 0);
;}
break;
- case 32:
+ case 33:
{
if (current_entry->prompt)
;}
break;
- case 40:
+ case 41:
{
menu_set_type((yyvsp[(1) - (3)].id)->stype);
;}
break;
- case 41:
+ case 42:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
;}
break;
- case 42:
+ case 43:
{
menu_add_expr(P_DEFAULT, (yyvsp[(2) - (4)].expr), (yyvsp[(3) - (4)].expr));
;}
break;
- case 43:
+ case 44:
{
menu_add_symbol(P_SELECT, sym_lookup((yyvsp[(2) - (4)].string), 0), (yyvsp[(3) - (4)].expr));
;}
break;
- case 44:
+ case 45:
{
menu_add_expr(P_RANGE, expr_alloc_comp(E_RANGE,(yyvsp[(2) - (5)].symbol), (yyvsp[(3) - (5)].symbol)), (yyvsp[(4) - (5)].expr));
;}
break;
- case 47:
+ case 48:
{
struct kconf_id *id = kconf_id_lookup((yyvsp[(2) - (3)].string), strlen((yyvsp[(2) - (3)].string)));
;}
break;
- case 48:
+ case 49:
{ (yyval.string) = NULL; ;}
break;
- case 49:
+ case 50:
{ (yyval.string) = (yyvsp[(2) - (2)].string); ;}
break;
- case 50:
+ case 51:
{
struct symbol *sym = sym_lookup((yyvsp[(2) - (3)].string), SYMBOL_CHOICE);
;}
break;
- case 51:
+ case 52:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 52:
+ case 53:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_CHOICE, T_ENDCHOICE)) {
;}
break;
- case 60:
+ case 61:
{
menu_add_prompt(P_PROMPT, (yyvsp[(2) - (4)].string), (yyvsp[(3) - (4)].expr));
;}
break;
- case 61:
+ case 62:
{
if ((yyvsp[(1) - (3)].id)->stype == S_BOOLEAN || (yyvsp[(1) - (3)].id)->stype == S_TRISTATE) {
;}
break;
- case 62:
+ case 63:
{
current_entry->sym->flags |= SYMBOL_OPTIONAL;
;}
break;
- case 63:
+ case 64:
{
if ((yyvsp[(1) - (4)].id)->stype == S_UNKNOWN) {
;}
break;
- case 66:
+ case 67:
{
printd(DEBUG_PARSE, "%s:%d:if\n", zconf_curname(), zconf_lineno());
;}
break;
- case 67:
+ case 68:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_IF, T_ENDIF)) {
;}
break;
- case 73:
+ case 74:
{
menu_add_prompt(P_MENU, (yyvsp[(2) - (3)].string), NULL);
;}
break;
- case 74:
+ case 75:
{
menu_add_entry(NULL);
;}
break;
- case 75:
+ case 76:
{
(yyval.menu) = menu_add_menu();
;}
break;
- case 76:
+ case 77:
{
if (zconf_endtoken((yyvsp[(1) - (1)].id), T_MENU, T_ENDMENU)) {
;}
break;
- case 82:
+ case 83:
{
printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), (yyvsp[(2) - (3)].string));
;}
break;
- case 83:
+ case 84:
{
menu_add_entry(NULL);
;}
break;
- case 84:
+ case 85:
{
menu_end_entry();
;}
break;
- case 85:
+ case 86:
{
printd(DEBUG_PARSE, "%s:%d:help\n", zconf_curname(), zconf_lineno());
;}
break;
- case 86:
+ case 87:
{
current_entry->help = (yyvsp[(2) - (2)].string);
;}
break;
- case 91:
+ case 92:
{
menu_add_dep((yyvsp[(3) - (4)].expr));
;}
break;
- case 93:
+ case 96:
+
+ {
+ menu_add_visibility((yyvsp[(2) - (2)].expr));
+;}
+ break;
+
+ case 98:
{
menu_add_prompt(P_PROMPT, (yyvsp[(1) - (2)].string), (yyvsp[(2) - (2)].expr));
;}
break;
- case 96:
+ case 101:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 97:
+ case 102:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 98:
+ case 103:
{ (yyval.id) = (yyvsp[(1) - (2)].id); ;}
break;
- case 101:
+ case 106:
{ (yyval.expr) = NULL; ;}
break;
- case 102:
+ case 107:
{ (yyval.expr) = (yyvsp[(2) - (2)].expr); ;}
break;
- case 103:
+ case 108:
{ (yyval.expr) = expr_alloc_symbol((yyvsp[(1) - (1)].symbol)); ;}
break;
- case 104:
+ case 109:
{ (yyval.expr) = expr_alloc_comp(E_EQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
- case 105:
+ case 110:
{ (yyval.expr) = expr_alloc_comp(E_UNEQUAL, (yyvsp[(1) - (3)].symbol), (yyvsp[(3) - (3)].symbol)); ;}
break;
- case 106:
+ case 111:
{ (yyval.expr) = (yyvsp[(2) - (3)].expr); ;}
break;
- case 107:
+ case 112:
{ (yyval.expr) = expr_alloc_one(E_NOT, (yyvsp[(2) - (2)].expr)); ;}
break;
- case 108:
+ case 113:
{ (yyval.expr) = expr_alloc_two(E_OR, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
break;
- case 109:
+ case 114:
{ (yyval.expr) = expr_alloc_two(E_AND, (yyvsp[(1) - (3)].expr), (yyvsp[(3) - (3)].expr)); ;}
break;
- case 110:
+ case 115:
{ (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), 0); free((yyvsp[(1) - (1)].string)); ;}
break;
- case 111:
+ case 116:
{ (yyval.symbol) = sym_lookup((yyvsp[(1) - (1)].string), SYMBOL_CONST); free((yyvsp[(1) - (1)].string)); ;}
break;
- case 112:
+ case 117:
{ (yyval.string) = NULL; ;}
break;
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
#define YYERROR_VERBOSE
#endif
%}
-%expect 28
+%expect 30
%union
{
%token <id>T_DEFAULT
%token <id>T_SELECT
%token <id>T_RANGE
+%token <id>T_VISIBLE
%token <id>T_OPTION
%token <id>T_ON
%token <string> T_WORD
;
option_name:
- T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT
+ T_DEPENDS | T_PROMPT | T_TYPE | T_SELECT | T_OPTIONAL | T_RANGE | T_DEFAULT | T_VISIBLE
;
common_stmt:
printd(DEBUG_PARSE, "%s:%d:menu\n", zconf_curname(), zconf_lineno());
};
-menu_entry: menu depends_list
+menu_entry: menu visibility_list depends_list
{
$$ = menu_add_menu();
};
printd(DEBUG_PARSE, "%s:%d:depends on\n", zconf_curname(), zconf_lineno());
};
+/* visibility option */
+
+visibility_list:
+ /* empty */
+ | visibility_list visible
+ | visibility_list T_EOL
+;
+
+visible: T_VISIBLE if_expr
+{
+ menu_add_visibility($2);
+};
+
/* prompt statement */
prompt_stmt_opt:
case T_IF: return "if";
case T_ENDIF: return "endif";
case T_DEPENDS: return "depends";
+ case T_VISIBLE: return "visible";
}
return "<token>";
}
static void fn_ELF_R_INFO(Elf_Rel *const rp, unsigned sym, unsigned type)
{
- rp->r_info = ELF_R_INFO(sym, type);
+ rp->r_info = _w(ELF_R_INFO(sym, type));
}
static void (*Elf_r_info)(Elf_Rel *const rp, unsigned sym, unsigned type) = fn_ELF_R_INFO;
-I DEFINE_TRACE,EXPORT_TRACEPOINT_SYMBOL,EXPORT_TRACEPOINT_SYMBOL_GPL \
--extra=+f --c-kinds=-px \
--regex-asm='/^ENTRY\(([^)]*)\).*/\1/' \
- --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/'
+ --regex-c='/^SYSCALL_DEFINE[[:digit:]]?\(([^,)]*).*/sys_\1/' \
+ --regex-c++='/^TRACE_EVENT\(([^,)]*).*/trace_\1/' \
+ --regex-c++='/^DEFINE_EVENT\(([^,)]*).*/trace_\1/'
all_kconfigs | xargs $1 -a \
--langdef=kconfig --language-force=kconfig \
static int snd_pcm_oss_reset(struct snd_pcm_oss_file *pcm_oss_file)
{
struct snd_pcm_substream *substream;
+ struct snd_pcm_runtime *runtime;
+ int i;
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_PLAYBACK];
- if (substream != NULL) {
- snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
- }
- substream = pcm_oss_file->streams[SNDRV_PCM_STREAM_CAPTURE];
- if (substream != NULL) {
+ for (i = 0; i < 2; i++) {
+ substream = pcm_oss_file->streams[i];
+ if (!substream)
+ continue;
+ runtime = substream->runtime;
snd_pcm_kernel_ioctl(substream, SNDRV_PCM_IOCTL_DROP, NULL);
- substream->runtime->oss.prepare = 1;
+ runtime->oss.prepare = 1;
+ runtime->oss.buffer_used = 0;
+ runtime->oss.prev_hw_ptr_period = 0;
+ runtime->oss.period_ptr = 0;
}
return 0;
}
a->channels = GRAB_BITS(buf, 0, 0, 3);
a->channels++;
+ a->sample_bits = 0;
+ a->max_bitrate = 0;
+
a->format = GRAB_BITS(buf, 0, 3, 4);
switch (a->format) {
case AUDIO_CODING_TYPE_REF_STREAM_HEADER:
case AUDIO_CODING_TYPE_LPCM:
val = GRAB_BITS(buf, 2, 0, 3);
- a->sample_bits = 0;
for (i = 0; i < 3; i++)
if (val & (1 << i))
a->sample_bits |= cea_sample_sizes[i + 1];
{
int i;
- pcm->rates = 0;
- pcm->formats = 0;
- pcm->maxbps = 0;
- pcm->channels_min = -1;
- pcm->channels_max = 0;
+ /* assume basic audio support (the basic audio flag is not in ELD;
+ * however, all audio capable sinks are required to support basic
+ * audio) */
+ pcm->rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000;
+ pcm->formats = SNDRV_PCM_FMTBIT_S16_LE;
+ pcm->maxbps = 16;
+ pcm->channels_max = 2;
for (i = 0; i < eld->sad_count; i++) {
struct cea_sad *a = &eld->sad[i];
pcm->rates |= a->rates;
- if (a->channels < pcm->channels_min)
- pcm->channels_min = a->channels;
if (a->channels > pcm->channels_max)
pcm->channels_max = a->channels;
if (a->format == AUDIO_CODING_TYPE_LPCM) {
- if (a->sample_bits & AC_SUPPCM_BITS_16) {
- pcm->formats |= SNDRV_PCM_FMTBIT_S16_LE;
- if (pcm->maxbps < 16)
- pcm->maxbps = 16;
- }
if (a->sample_bits & AC_SUPPCM_BITS_20) {
pcm->formats |= SNDRV_PCM_FMTBIT_S32_LE;
if (pcm->maxbps < 20)
/* restrict the parameters by the values the codec provides */
pcm->rates &= codec_pars->rates;
pcm->formats &= codec_pars->formats;
- pcm->channels_min = max(pcm->channels_min, codec_pars->channels_min);
pcm->channels_max = min(pcm->channels_max, codec_pars->channels_max);
pcm->maxbps = min(pcm->maxbps, codec_pars->maxbps);
}
*/
static struct snd_pci_quirk position_fix_list[] __devinitdata = {
SND_PCI_QUIRK(0x1025, 0x009f, "Acer Aspire 5110", POS_FIX_LPIB),
+ SND_PCI_QUIRK(0x1025, 0x026f, "Acer Aspire 5538", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01cc, "Dell D820", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01de, "Dell Precision 390", POS_FIX_LPIB),
SND_PCI_QUIRK(0x1028, 0x01f6, "Dell Latitude 131L", POS_FIX_LPIB),
struct conexant_spec *spec = codec->spec;
unsigned int pinctl;
- snd_printdd("CXT5066: update speaker, hp_present=%d\n",
- spec->hp_present);
+ snd_printdd("CXT5066: update speaker, hp_present=%d, cur_eapd=%d\n",
+ spec->hp_present, spec->cur_eapd);
/* Port A (HP) */
pinctl = ((spec->hp_present & 1) && spec->cur_eapd) ? PIN_HP : 0;
pinctl);
/* Port D (HP/LO) */
- pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
- ? spec->port_d_mode : 0;
- /* Mute if Port A is connected on Thinkpad */
- if (spec->thinkpad && (spec->hp_present & 1))
- pinctl = 0;
+ if (spec->dell_automute) {
+ /* DELL AIO Port Rule: PortA> PortD> IntSpk */
+ pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
+ ? PIN_OUT : 0;
+ } else if (spec->thinkpad) {
+ if (spec->cur_eapd)
+ pinctl = spec->port_d_mode;
+ /* Mute dock line-out if Port A (laptop HP) is present */
+ if (spec->hp_present& 1)
+ pinctl = 0;
+ } else {
+ pinctl = ((spec->hp_present & 2) && spec->cur_eapd)
+ ? spec->port_d_mode : 0;
+ }
snd_hda_codec_write(codec, 0x1c, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
pinctl = (!spec->hp_present && spec->cur_eapd) ? PIN_OUT : 0;
snd_hda_codec_write(codec, 0x1f, 0, AC_VERB_SET_PIN_WIDGET_CONTROL,
pinctl);
-
- if (spec->dell_automute) {
- /* DELL AIO Port Rule: PortA > PortD > IntSpk */
- pinctl = (!(spec->hp_present & 1) && spec->cur_eapd)
- ? PIN_OUT : 0;
- snd_hda_codec_write(codec, 0x1c, 0,
- AC_VERB_SET_PIN_WIDGET_CONTROL, pinctl);
- }
}
/* turn on/off EAPD (+ mute HP) as a master switch */
static struct snd_pci_quirk cxt5066_cfg_tbl[] = {
SND_PCI_QUIRK_MASK(0x1025, 0xff00, 0x0400, "Acer", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x02d8, "Dell Vostro", CXT5066_DELL_VOSTRO),
- SND_PCI_QUIRK(0x1028, 0x02f5, "Dell",
- CXT5066_DELL_LAPTOP),
+ SND_PCI_QUIRK(0x1028, 0x02f5, "Dell Vostro 320", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x1028, 0x0402, "Dell Vostro", CXT5066_DELL_VOSTRO),
SND_PCI_QUIRK(0x1028, 0x0408, "Dell Inspiron One 19T", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x103c, 0x360b, "HP G60", CXT5066_HP_LAPTOP),
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT5066_OLPC_XO_1_5),
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400s", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b2, "Thinkpad X100e", CXT5066_IDEAPAD),
+ SND_PCI_QUIRK(0x17aa, 0x21c5, "Thinkpad Edge 13", CXT5066_THINKPAD),
SND_PCI_QUIRK(0x17aa, 0x21b3, "Thinkpad Edge 13 (197)", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x21b4, "Thinkpad Edge", CXT5066_IDEAPAD),
SND_PCI_QUIRK(0x17aa, 0x21c8, "Thinkpad Edge 11", CXT5066_IDEAPAD),
return -ENODEV;
} else {
/* fallback to the codec default */
- hinfo->channels_min = codec_pars->channels_min;
hinfo->channels_max = codec_pars->channels_max;
hinfo->rates = codec_pars->rates;
hinfo->formats = codec_pars->formats;
spec->init_amp = ALC_INIT_GPIO3;
break;
case 5:
+ default:
spec->init_amp = ALC_INIT_DEFAULT;
break;
}
{ }
};
+/*
+ *ALC888 Acer Aspire 7730G model
+ */
+
+static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
+/* Bias voltage on for external mic port */
+ {0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN | PIN_VREF80},
+/* Front Mic: set to PIN_IN (empty by default) */
+ {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN},
+/* Unselect Front Mic by default in input mixer 3 */
+ {0x22, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0xb)},
+/* Enable unsolicited event for HP jack */
+ {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
+/* Enable speaker output */
+ {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x14, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x14, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/* Enable headphone output */
+ {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT | PIN_HP},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x15, AC_VERB_SET_EAPD_BTLENABLE, 2},
+/*Enable internal subwoofer */
+ {0x17, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
+ {0x17, AC_VERB_SET_EAPD_BTLENABLE, 2},
+ { }
+};
+
/*
* ALC889 Acer Aspire 8930G model
*/
spec->autocfg.speaker_pins[2] = 0x17;
}
+static void alc888_acer_aspire_7730g_setup(struct hda_codec *codec)
+{
+ struct alc_spec *spec = codec->spec;
+
+ spec->autocfg.hp_pins[0] = 0x15;
+ spec->autocfg.speaker_pins[0] = 0x14;
+ spec->autocfg.speaker_pins[1] = 0x16;
+ spec->autocfg.speaker_pins[2] = 0x17;
+}
+
static void alc889_acer_aspire_8930g_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
SND_PCI_QUIRK(0x1734, 0x10b0, "Fujitsu", ALC880_FUJITSU),
SND_PCI_QUIRK(0x1854, 0x0018, "LG LW20", ALC880_LG_LW),
SND_PCI_QUIRK(0x1854, 0x003b, "LG", ALC880_LG),
+ SND_PCI_QUIRK(0x1854, 0x005f, "LG P1 Express", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0068, "LG w1", ALC880_LG),
SND_PCI_QUIRK(0x1854, 0x0077, "LG LW25", ALC880_LG_LW),
SND_PCI_QUIRK(0x19db, 0x4188, "TCL S700", ALC880_TCL_S700),
{ }
};
-static struct hda_verb alc888_acer_aspire_7730G_verbs[] = {
- {0x15, AC_VERB_SET_CONNECT_SEL, 0x00},
- {0x17, AC_VERB_SET_CONNECT_SEL, 0x02},
- {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, ALC880_HP_EVENT | AC_USRSP_EN},
- { } /* end */
-};
-
static void alc888_6st_dell_setup(struct hda_codec *codec)
{
struct alc_spec *spec = codec->spec;
SND_PCI_QUIRK(0x17aa, 0x3bfc, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x3bfd, "Lenovo NB0763", ALC883_LENOVO_NB0763),
SND_PCI_QUIRK(0x17aa, 0x101d, "Lenovo Sky", ALC888_LENOVO_SKY),
- SND_PCI_QUIRK(0x17c0, 0x4071, "MEDION MD2", ALC883_MEDION_MD2),
SND_PCI_QUIRK(0x17c0, 0x4085, "MEDION MD96630", ALC888_LENOVO_MS7195_DIG),
SND_PCI_QUIRK(0x17f2, 0x5000, "Albatron KI690-AM2", ALC883_6ST_DIG),
SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66),
.const_channel_count = 6,
.input_mux = &alc883_capture_source,
.unsol_event = alc_automute_amp_unsol_event,
- .setup = alc888_acer_aspire_6530g_setup,
+ .setup = alc888_acer_aspire_7730g_setup,
.init_hook = alc_automute_amp,
},
[ALC883_MEDION] = {
{
struct alc_spec *spec = codec->spec;
struct auto_pin_cfg *cfg = &spec->autocfg;
- int i, err;
+ int i, err, type;
+ int type_idx = 0;
hda_nid_t nid;
for (i = 0; i < cfg->num_inputs; i++) {
nid = cfg->inputs[i].pin;
if (get_wcaps(codec, nid) & AC_WCAP_IN_AMP) {
char label[32];
+ type = cfg->inputs[i].type;
+ if (i > 0 && type == cfg->inputs[i - 1].type)
+ type_idx++;
+ else
+ type_idx = 0;
snprintf(label, sizeof(label), "%s Boost",
hda_get_autocfg_input_label(codec, cfg, i));
- err = add_control(spec, ALC_CTL_WIDGET_VOL, label, 0,
+ err = add_control(spec, ALC_CTL_WIDGET_VOL, label,
+ type_idx,
HDA_COMPOSE_AMP_VAL(nid, 3, 0, HDA_INPUT));
if (err < 0)
return err;
enum {
ALC269_FIXUP_SONY_VAIO,
ALC269_FIXUP_DELL_M101Z,
+ ALC269_FIXUP_LENOVO_EDGE14,
+ ALC269_FIXUP_ASUS_G73JW,
};
static const struct alc_fixup alc269_fixups[] = {
{}
}
},
+ [ALC269_FIXUP_LENOVO_EDGE14] = {
+ .sku = ALC_FIXUP_SKU_IGNORE,
+ },
+ [ALC269_FIXUP_ASUS_G73JW] = {
+ .pins = (const struct alc_pincfg[]) {
+ { 0x17, 0x99130111 }, /* subwoofer */
+ { }
+ }
+ },
};
static struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK_VENDOR(0x104d, "Sony VAIO", ALC269_FIXUP_SONY_VAIO),
SND_PCI_QUIRK(0x1028, 0x0470, "Dell M101z", ALC269_FIXUP_DELL_M101Z),
+ SND_PCI_QUIRK(0x17aa, 0x21b8, "Thinkpad Edge 14", ALC269_FIXUP_LENOVO_EDGE14),
+ SND_PCI_QUIRK(0x1043, 0x1a13, "Asus G73Jw", ALC269_FIXUP_ASUS_G73JW),
{}
};
static int alc861vd_auto_create_input_ctls(struct hda_codec *codec,
const struct auto_pin_cfg *cfg)
{
- return alc_auto_create_input_ctls(codec, cfg, 0x15, 0x09, 0);
+ return alc_auto_create_input_ctls(codec, cfg, 0x0b, 0x22, 0);
}
return 0x02;
else if (nid >= 0x0c && nid <= 0x0e)
return nid - 0x0c + 0x02;
+ else if (nid == 0x26) /* ALC887-VD has this DAC too */
+ return 0x25;
else
return 0;
}
static hda_nid_t alc662_dac_to_mix(struct hda_codec *codec, hda_nid_t pin,
hda_nid_t dac)
{
- hda_nid_t mix[4];
+ hda_nid_t mix[5];
int i, num;
num = snd_hda_get_connections(codec, pin, mix, ARRAY_SIZE(mix));
static struct snd_pci_quirk stac92hd73xx_codec_id_cfg_tbl[] = {
SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a1,
"Alienware M17x", STAC_ALIENWARE_M17X),
+ SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x043a,
+ "Alienware M17x", STAC_ALIENWARE_M17X),
{} /* terminator */
};
}
pllb = clk_get(NULL, "pllb");
- if (IS_ERR(mclk)) {
+ if (IS_ERR(pllb)) {
printk(KERN_ERR "ASoC: Failed to get PLLB\n");
- ret = PTR_ERR(mclk);
+ ret = PTR_ERR(pllb);
goto err_mclk;
}
ret = clk_set_parent(mclk, pllb);
if (!at91sam9g20ek_snd_device) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
ret = -ENOMEM;
+ goto err_mclk;
}
platform_set_drvdata(at91sam9g20ek_snd_device,
ret = platform_device_add(at91sam9g20ek_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
- platform_device_put(at91sam9g20ek_snd_device);
+ goto err_device_add;
}
return ret;
+err_device_add:
+ platform_device_put(at91sam9g20ek_snd_device);
err_mclk:
clk_put(mclk);
mclk = NULL;
return 0;
err1:
- platform_device_del(afeb9260_snd_device);
platform_device_put(afeb9260_snd_device);
return err;
}
static int max98088_remove(struct snd_soc_codec *codec)
{
+ struct max98088_priv *max98088 = snd_soc_codec_get_drvdata(codec);
+
max98088_set_bias_level(codec, SND_SOC_BIAS_OFF);
+ kfree(max98088->eq_texts);
return 0;
}
.reg_cache_size = sizeof(stac9766_reg),
.reg_word_size = sizeof(u16),
.reg_cache_step = 2,
+ .reg_cache_default = stac9766_reg,
};
static __devinit int stac9766_probe(struct platform_device *pdev)
int aic3x_get_gpio(struct snd_soc_codec *codec, int gpio)
{
u8 reg = gpio ? AIC3X_GPIO2_REG : AIC3X_GPIO1_REG;
- u8 val, bit = gpio ? 2: 1;
+ u8 val = 0, bit = gpio ? 2 : 1;
aic3x_read(codec, reg, &val);
return (val >> bit) & 1;
int aic3x_headset_detected(struct snd_soc_codec *codec)
{
- u8 val;
+ u8 val = 0;
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
return (val >> 4) & 1;
}
int aic3x_button_pressed(struct snd_soc_codec *codec)
{
- u8 val;
+ u8 val = 0;
aic3x_read(codec, AIC3X_HEADSET_DETECT_CTRL_B, &val);
return (val >> 5) & 1;
}
if (data->power_state) {
val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
- if (val < 0)
+ if (val < 0) {
dev_err(&tpa6130a2_client->dev, "Write failed\n");
+ return val;
+ }
}
/* Either powered on or off, we save the context */
return -EINVAL;
}
- return 0;
snd_pcm_hw_constraint_list(substream->runtime, 0,
SNDRV_PCM_HW_PARAM_RATE,
&wm8523->rate_constraint);
static const u16 wm8580_reg[] = {
0x0121, 0x017e, 0x007d, 0x0014, /*R3*/
0x0121, 0x017e, 0x007d, 0x0194, /*R7*/
- 0x001c, 0x0002, 0x0002, 0x00c2, /*R11*/
+ 0x0010, 0x0002, 0x0002, 0x00c2, /*R11*/
0x0182, 0x0082, 0x000a, 0x0024, /*R15*/
0x0009, 0x0000, 0x00ff, 0x0000, /*R19*/
0x00ff, 0x00ff, 0x00ff, 0x00ff, /*R23*/
paifa |= 0x8;
break;
case SNDRV_PCM_FORMAT_S20_3LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_20;
break;
case SNDRV_PCM_FORMAT_S24_LE:
- paifa |= 0x10;
+ paifa |= 0x0;
paifb |= WM8580_AIF_LENGTH_24;
break;
case SNDRV_PCM_FORMAT_S32_LE:
- paifa |= 0x10;
- paifb |= WM8580_AIF_LENGTH_24;
+ paifa |= 0x0;
+ paifb |= WM8580_AIF_LENGTH_32;
break;
default:
return -EINVAL;
snd_soc_update_bits(codec, WM8731_RINVOL, 0x100, 0);
/* Disable bypass path by default */
- snd_soc_update_bits(codec, WM8731_APANA, 0x4, 0);
+ snd_soc_update_bits(codec, WM8731_APANA, 0x8, 0);
snd_soc_add_controls(codec, wm8731_snd_controls,
ARRAY_SIZE(wm8731_snd_controls));
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8904_priv *wm8904 = snd_soc_codec_get_drvdata(codec);
- return wm8904->deemph;
+ ucontrol->value.enumerated.item[0] = wm8904->deemph;
+ return 0;
}
static int wm8904_put_deemph(struct snd_kcontrol *kcontrol,
wm8904_set_bias_level(codec, SND_SOC_BIAS_OFF);
regulator_bulk_free(ARRAY_SIZE(wm8904->supplies), wm8904->supplies);
+ kfree(wm8904->retune_mobile_texts);
+ kfree(wm8904->drc_texts);
return 0;
}
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8955_priv *wm8955 = snd_soc_codec_get_drvdata(codec);
- return wm8955->deemph;
+ ucontrol->value.enumerated.item[0] = wm8955->deemph;
+ return 0;
}
static int wm8955_put_deemph(struct snd_kcontrol *kcontrol,
struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
struct wm8960_priv *wm8960 = snd_soc_codec_get_drvdata(codec);
- return wm8960->deemph;
+ ucontrol->value.enumerated.item[0] = wm8960->deemph;
+ return 0;
}
static int wm8960_put_deemph(struct snd_kcontrol *kcontrol,
if (fs <= 24000)
reg |= WM8961_DACSLOPE;
else
- reg &= WM8961_DACSLOPE;
+ reg &= ~WM8961_DACSLOPE;
snd_soc_write(codec, WM8961_ADC_DAC_CONTROL_2, reg);
return 0;
freq /= 2;
} else {
dev_dbg(codec->dev, "Using MCLK/1 for %dHz MCLK\n", freq);
- reg &= WM8961_MCLKDIV;
+ reg &= ~WM8961_MCLKDIV;
}
snd_soc_write(codec, WM8961_CLOCKING1, reg);
int mask;
int active;
- mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
+ mask = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2_MASK);
active = snd_soc_read(codec, WM8962_INTERRUPT_STATUS_2);
active &= ~mask;
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC2_DET, wm8994);
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_SHRT, wm8994);
wm8994_free_irq(codec->control_data, WM8994_IRQ_MIC1_DET, wm8994);
+ kfree(wm8994->retune_mobile_texts);
+ kfree(wm8994->drc_texts);
kfree(wm8994);
return 0;
.resume = wm8994_resume,
.read = wm8994_read,
.write = wm8994_write,
+ .readable_register = wm8994_readable,
+ .volatile_register = wm8994_volatile,
.set_bias_level = wm8994_set_bias_level,
};
SOC_DOUBLE_R("Speaker ZC Switch",
WM8993_SPEAKER_VOLUME_LEFT, WM8993_SPEAKER_VOLUME_RIGHT,
7, 1, 0),
-SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 0, 3, 7, 0,
+SOC_DOUBLE_TLV("Speaker Boost Volume", WM8993_SPKOUT_BOOST, 3, 0, 7, 0,
spkboost_tlv),
SOC_ENUM("Speaker Reference", speaker_ref),
SOC_ENUM("Speaker Mode", speaker_mode),
static int davinci_vcif_remove(struct platform_device *pdev)
{
+ struct davinci_vcif_dev *davinci_vcif_dev = dev_get_drvdata(&pdev->dev);
+
snd_soc_unregister_dai(&pdev->dev);
+ kfree(davinci_vcif_dev);
return 0;
}
ret = platform_device_add(simone_snd_ac97_device);
if (ret)
- goto fail;
+ goto fail1;
simone_snd_device = platform_device_alloc("soc-audio", -1);
if (!simone_snd_device) {
ret = -ENOMEM;
- goto fail;
+ goto fail2;
}
platform_set_drvdata(simone_snd_device, &snd_soc_simone);
ret = platform_device_add(simone_snd_device);
- if (ret) {
- platform_device_put(simone_snd_device);
- goto fail;
- }
+ if (ret)
+ goto fail3;
- return ret;
+ return 0;
-fail:
+fail3:
+ platform_device_put(simone_snd_device);
+fail2:
+ platform_device_del(simone_snd_ac97_device);
+fail1:
platform_device_put(simone_snd_ac97_device);
return ret;
}
rc = platform_device_add(pdev);
if (rc) {
pr_err("efika_fabric_init: platform_device_add() failed\n");
+ platform_device_put(pdev);
return -ENODEV;
}
return 0;
#include <linux/module.h>
#include <linux/of_device.h>
#include <linux/slab.h>
-#include <linux/of_device.h>
#include <linux/of_platform.h>
#include <sound/soc.h>
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
dev_err(&pdev->dev, "platform device add failed\n");
goto error;
}
+ dev_set_drvdata(&pdev->dev, sound_device);
of_node_put(codec_np);
rc = platform_device_add(pdev);
if (rc) {
pr_err("pcm030_fabric_init: platform_device_add() failed\n");
+ platform_device_put(pdev);
return -ENODEV;
}
return 0;
}
ssi->soc_platform_pdev_fiq = platform_device_alloc("imx-fiq-pcm-audio", pdev->id);
- if (!ssi->soc_platform_pdev_fiq)
+ if (!ssi->soc_platform_pdev_fiq) {
+ ret = -ENOMEM;
goto failed_pdev_fiq_alloc;
+ }
+
platform_set_drvdata(ssi->soc_platform_pdev_fiq, ssi);
ret = platform_device_add(ssi->soc_platform_pdev_fiq);
if (ret) {
}
ssi->soc_platform_pdev = platform_device_alloc("imx-pcm-audio", pdev->id);
- if (!ssi->soc_platform_pdev)
+ if (!ssi->soc_platform_pdev) {
+ ret = -ENOMEM;
goto failed_pdev_alloc;
+ }
+
platform_set_drvdata(ssi->soc_platform_pdev, ssi);
ret = platform_device_add(ssi->soc_platform_pdev);
if (ret) {
failed_pdev_add:
platform_device_put(ssi->soc_platform_pdev);
failed_pdev_alloc:
+ platform_device_del(ssi->soc_platform_pdev_fiq);
failed_pdev_fiq_add:
platform_device_put(ssi->soc_platform_pdev_fiq);
failed_pdev_fiq_alloc:
struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
struct imx_ssi *ssi = platform_get_drvdata(pdev);
- platform_device_del(ssi->soc_platform_pdev);
- platform_device_put(ssi->soc_platform_pdev);
+ platform_device_unregister(ssi->soc_platform_pdev);
+ platform_device_unregister(ssi->soc_platform_pdev_fiq);
snd_soc_unregister_dai(&pdev->dev);
.num_links = ARRAY_SIZE(imx_phycore_dai_ac97),
};
+static struct platform_device *imx_phycore_snd_ac97_device;
static struct platform_device *imx_phycore_snd_device;
static int __init imx_phycore_init(void)
/* return happy. We might run on a totally different machine */
return 0;
- imx_phycore_snd_device = platform_device_alloc("soc-audio", -1);
- if (!imx_phycore_snd_device)
+ imx_phycore_snd_ac97_device = platform_device_alloc("soc-audio", -1);
+ if (!imx_phycore_snd_ac97_device)
return -ENOMEM;
- platform_set_drvdata(imx_phycore_snd_device, &imx_phycore);
- ret = platform_device_add(imx_phycore_snd_device);
+ platform_set_drvdata(imx_phycore_snd_ac97_device, &imx_phycore);
+ ret = platform_device_add(imx_phycore_snd_ac97_device);
+ if (ret)
+ goto fail1;
imx_phycore_snd_device = platform_device_alloc("wm9712-codec", -1);
- if (!imx_phycore_snd_device)
- return -ENOMEM;
+ if (!imx_phycore_snd_device) {
+ ret = -ENOMEM;
+ goto fail2;
+ }
ret = platform_device_add(imx_phycore_snd_device);
if (ret) {
printk(KERN_ERR "ASoC: Platform device allocation failed\n");
- platform_device_put(imx_phycore_snd_device);
+ goto fail3;
}
+ return 0;
+
+fail3:
+ platform_device_put(imx_phycore_snd_device);
+fail2:
+ platform_device_del(imx_phycore_snd_ac97_device);
+fail1:
+ platform_device_put(imx_phycore_snd_ac97_device);
return ret;
}
static void __exit imx_phycore_exit(void)
{
platform_device_unregister(imx_phycore_snd_device);
+ platform_device_unregister(imx_phycore_snd_ac97_device);
}
late_initcall(imx_phycore_init);
mutex_lock(&ac97_mutex);
val = nuc900_checkready();
- if (!!val) {
+ if (val) {
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
goto out;
}
mutex_lock(&ac97_mutex);
tmp = nuc900_checkready();
- if (!!tmp)
+ if (tmp)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
/* clear the R_WB bit and write register index */
udelay(100);
val = nuc900_checkready();
- if (!!val)
+ if (val)
dev_err(nuc900_audio->dev, "AC97 codec is not ready\n");
mutex_unlock(&ac97_mutex);
return ret;
}
-static int nuc900_ac97_probe(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_probe(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
unsigned long val;
return 0;
}
-static void nuc900_ac97_remove(struct platform_device *pdev,
- struct snd_soc_dai *dai)
+static int nuc900_ac97_remove(struct snd_soc_dai *dai)
{
struct nuc900_audio *nuc900_audio = nuc900_ac97_data;
clk_disable(nuc900_audio->clk);
+ return 0;
}
static struct snd_soc_dai_ops nuc900_ac97_dai_ops = {
.channels_max = 2,
},
.ops = &nuc900_ac97_dai_ops,
-}
+};
static int __devinit nuc900_ac97_drvprobe(struct platform_device *pdev)
{
static int __devexit nuc900_ac97_drvremove(struct platform_device *pdev)
{
-
snd_soc_unregister_dai(&pdev->dev);
clk_put(nuc900_ac97_data->clk);
release_mem_region(nuc900_ac97_data->res->start,
resource_size(nuc900_ac97_data->res));
+ kfree(nuc900_ac97_data);
nuc900_ac97_data = NULL;
return 0;
};
+extern struct nuc900_audio *nuc900_ac97_data;
+
#endif /*end _NUC900_AUDIO_H */
unsigned long flags;
int ret = 0;
- spin_lock_irqsave(&nuc900_audio->lock, flags);
-
ret = snd_pcm_lib_malloc_pages(substream, params_buffer_bytes(params));
if (ret < 0)
return ret;
+ spin_lock_irqsave(&nuc900_audio->lock, flags);
+
nuc900_audio->substream = substream;
nuc900_audio->dma_addr[substream->stream] = runtime->dma_addr;
nuc900_audio->buffersize[substream->stream] =
struct snd_pcm_runtime *runtime = substream->runtime;
struct nuc900_audio *nuc900_audio = runtime->private_data;
unsigned long flags, val;
+ int ret = 0;
spin_lock_irqsave(&nuc900_audio->lock, flags);
AUDIO_WRITE(nuc900_audio->mmio + ACTL_RESET, val);
break;
default:
- return -EINVAL;
+ ret = -EINVAL;
}
spin_unlock_irqrestore(&nuc900_audio->lock, flags);
- return 0;
+ return ret;
}
static int nuc900_dma_trigger(struct snd_pcm_substream *substream, int cmd)
.ops = &nuc900_dma_ops,
.pcm_new = nuc900_dma_new,
.pcm_free = nuc900_dma_free_dma_buffers,
-}
+};
static int __devinit nuc900_soc_platform_probe(struct platform_device *pdev)
{
config SND_OMAP_SOC_N810
tristate "SoC Audio support for Nokia N810"
depends on SND_OMAP_SOC && MACH_NOKIA_N810 && I2C
+ depends on OMAP_MUX
select SND_OMAP_SOC_MCBSP
- select OMAP_MUX
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on Nokia N810.
pr_err(PREFIX "Failed to get DAC regulator from %s: %ld\n",
dev_name(&omap3pandora_snd_device->dev),
PTR_ERR(omap3pandora_dac_reg));
+ ret = PTR_ERR(omap3pandora_dac_reg);
goto fail3;
}
tlv320aic23_mclk = clk_get(dev, "mclk");
if (IS_ERR(tlv320aic23_mclk)) {
printk(KERN_ERR "Could not get mclk clock\n");
- return -ENODEV;
+ err = PTR_ERR(tlv320aic23_mclk);
+ goto err2;
}
/*
if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) {
printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
err = -ECANCELED;
- goto err1;
+ goto err3;
}
}
(uint) clk_get_rate(tlv320aic23_mclk), CODEC_CLOCK);
return 0;
-err1:
+
+err3:
clk_put(tlv320aic23_mclk);
+err2:
platform_device_del(osk_snd_device);
+err1:
platform_device_put(osk_snd_device);
return err;
static void __exit osk_soc_exit(void)
{
+ clk_put(tlv320aic23_mclk);
platform_device_unregister(osk_snd_device);
}
config SND_PXA2XX_SOC
tristate "SoC Audio for the Intel PXA2xx chip"
depends on ARCH_PXA
+ select SND_ARM
select SND_PXA2XX_LIB
help
Say Y or M if you want to add support for codecs attached to
}
mout_epll = clk_get(NULL, "mout_epll");
- if (IS_ERR(fout_epll)) {
+ if (IS_ERR(mout_epll)) {
printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
__func__);
ret = -EINVAL;
}
sclk_spdif = clk_get(NULL, "sclk_spdif");
- if (IS_ERR(fout_epll)) {
+ if (IS_ERR(sclk_spdif)) {
printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
__func__);
ret = -EINVAL;
.rate_max = 1562500,
},
.ops = &s6000_i2s_dai_ops,
-}
+};
static int __devinit s6000_i2s_probe(struct platform_device *pdev)
{
}
res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- s6000_soc_platform.name, pcm);
+ "s6000-audio", pcm);
if (res) {
printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
return res;
snd_soc_dapm_sync(codec);
- snd_ctl_add(codec->snd_card, snd_ctl_new1(&audio_out_mux, codec));
+ snd_ctl_add(codec->card->snd_card, snd_ctl_new1(&audio_out_mux, codec));
return 0;
}
static int __devexit sh4_soc_dai_remove(struct platform_device *pdev)
{
- snd_soc_unregister_dai(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
+ snd_soc_unregister_dais(&pdev->dev, ARRAY_SIZE(sh4_ssi_dai));
return 0;
}
#ifdef CONFIG_SND_SOC_AC97_BUS
/* register any AC97 codecs */
for (i = 0; i < card->num_rtd; i++) {
- ret = soc_register_ac97_dai_link(&card->rtd[i]);
- if (ret < 0) {
- printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
- goto probe_dai_err;
- }
+ ret = soc_register_ac97_dai_link(&card->rtd[i]);
+ if (ret < 0) {
+ printk(KERN_ERR "asoc: failed to register AC97 %s\n", card->name);
+ while (--i >= 0)
+ soc_unregister_ac97_dai_link(&card->rtd[i]);
+ goto probe_dai_err;
}
+ }
#endif
card->instantiated = 1;
pr_debug("Registered DAI '%s'\n", dai->name);
}
+ mutex_lock(&client_mutex);
snd_soc_instantiate_cards();
+ mutex_unlock(&client_mutex);
return 0;
err:
case SND_SOC_DAPM_STREAM_RESUME:
sys_power = 1;
break;
+ case SND_SOC_DAPM_STREAM_STOP:
+ sys_power = !!codec->active;
+ break;
case SND_SOC_DAPM_STREAM_SUSPEND:
sys_power = 0;
break;
if (child_pid > 0)
kill(child_pid, SIGTERM);
- if (signr == -1)
+ if (signr == -1 || signr == SIGUSR1)
return;
signal(signr, SIG_DFL);
atexit(sig_atexit);
signal(SIGCHLD, sig_handler);
signal(SIGINT, sig_handler);
+ signal(SIGUSR1, sig_handler);
if (forks && (pipe(child_ready_pipe) < 0 || pipe(go_pipe) < 0)) {
perror("failed to create pipes");
execvp(argv[0], (char **)argv);
perror(argv[0]);
+ kill(getppid(), SIGUSR1);
exit(-1);
}
}
}
- if (quiet)
+ if (quiet || signr == SIGUSR1)
return 0;
fprintf(stderr, "[ perf record: Woken up %ld times to write data ]\n", waking);
/*
* We set id to -1 if the data file doesn't contain sample
- * ids. Check for this and avoid walking through the entire
- * list of ids which may be large.
+ * ids. This can happen when the data file contains one type
+ * of event and in that case, the header can still store the
+ * event attribute information. Check for this and avoid
+ * walking through the entire list of ids which may be large.
*/
- if (id == -1ULL)
+ if (id == -1ULL) {
+ if (header->attrs > 0)
+ return &header->attr[0]->attr;
return NULL;
+ }
for (i = 0; i < header->attrs; i++) {
struct perf_header_attr *attr = header->attr[i];
struct machine *machine = kmaps->machine;
struct map *curr_map = map;
struct symbol *pos;
- int count = 0;
+ int count = 0, moved = 0;
struct rb_root *root = &self->symbols[map->type];
struct rb_node *next = rb_first(root);
int kernel_range = 0;
char dso_name[PATH_MAX];
struct dso *dso;
+ if (count == 0) {
+ curr_map = map;
+ goto filter_symbol;
+ }
+
if (self->kernel == DSO_TYPE_GUEST_KERNEL)
snprintf(dso_name, sizeof(dso_name),
"[guest.kernel].%d",
map_groups__insert(kmaps, curr_map);
++kernel_range;
}
-
+filter_symbol:
if (filter && filter(curr_map, pos)) {
discard_symbol: rb_erase(&pos->rb_node, root);
symbol__delete(pos);
if (curr_map != map) {
rb_erase(&pos->rb_node, root);
symbols__insert(&curr_map->dso->symbols[curr_map->type], pos);
- }
- count++;
+ ++moved;
+ } else
+ ++count;
}
}
dso__set_loaded(curr_map->dso, curr_map->type);
}
- return count;
+ return count + moved;
}
int dso__load_kallsyms(struct dso *self, const char *filename,
return kernel;
}
+struct process_args {
+ u64 start;
+};
+
+static int symbol__in_kernel(void *arg, const char *name,
+ char type __used, u64 start)
+{
+ struct process_args *args = arg;
+
+ if (strchr(name, '['))
+ return 0;
+
+ args->start = start;
+ return 1;
+}
+
+/* Figure out the start address of kernel map from /proc/kallsyms */
+static u64 machine__get_kernel_start_addr(struct machine *machine)
+{
+ const char *filename;
+ char path[PATH_MAX];
+ struct process_args args;
+
+ if (machine__is_host(machine)) {
+ filename = "/proc/kallsyms";
+ } else {
+ if (machine__is_default_guest(machine))
+ filename = (char *)symbol_conf.default_guest_kallsyms;
+ else {
+ sprintf(path, "%s/proc/kallsyms", machine->root_dir);
+ filename = path;
+ }
+ }
+
+ if (kallsyms__parse(filename, &args, symbol__in_kernel) <= 0)
+ return 0;
+
+ return args.start;
+}
+
int __machine__create_kernel_maps(struct machine *self, struct dso *kernel)
{
enum map_type type;
+ u64 start = machine__get_kernel_start_addr(self);
for (type = 0; type < MAP__NR_TYPES; ++type) {
struct kmap *kmap;
- self->vmlinux_maps[type] = map__new2(0, kernel, type);
+ self->vmlinux_maps[type] = map__new2(start, kernel, type);
if (self->vmlinux_maps[type] == NULL)
return -1;
*/
#include <linux/stringify.h>
+#include <asm-generic/vmlinux.lds.h>
.section .init.ramfs,"a"
__irf_start:
.incbin __stringify(INITRAMFS_IMAGE)
__irf_end:
.section .init.ramfs.info,"a"
-.globl __initramfs_size
-__initramfs_size:
+.globl VMLINUX_SYMBOL(__initramfs_size)
+VMLINUX_SYMBOL(__initramfs_size):
#ifdef CONFIG_64BIT
.quad __irf_end - __irf_start
#else
projects / cascardo / linux.git / commitdiff