#
obj-y := extable.o ioremap.o dma.o fault.o init.o
-obj-y += tlb.o tlbex.o cache_arc700.o mmap.o
+obj-y += tlb.o tlbex.o cache.o mmap.o
--- /dev/null
+/*
+ * ARC700 VIPT Cache Management
+ *
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
+ * -flush_cache_dup_mm (fork)
+ * -likewise for flush_cache_mm (exit/execve)
+ * -likewise for flush_cache_range,flush_cache_page (munmap, exit, COW-break)
+ *
+ * vineetg: Apr 2011
+ * -Now that MMU can support larger pg sz (16K), the determiniation of
+ * aliasing shd not be based on assumption of 8k pg
+ *
+ * vineetg: Mar 2011
+ * -optimised version of flush_icache_range( ) for making I/D coherent
+ * when vaddr is available (agnostic of num of aliases)
+ *
+ * vineetg: Mar 2011
+ * -Added documentation about I-cache aliasing on ARC700 and the way it
+ * was handled up until MMU V2.
+ * -Spotted a three year old bug when killing the 4 aliases, which needs
+ * bottom 2 bits, so we need to do paddr | {0x00, 0x01, 0x02, 0x03}
+ * instead of paddr | {0x00, 0x01, 0x10, 0x11}
+ * (Rajesh you owe me one now)
+ *
+ * vineetg: Dec 2010
+ * -Off-by-one error when computing num_of_lines to flush
+ * This broke signal handling with bionic which uses synthetic sigret stub
+ *
+ * vineetg: Mar 2010
+ * -GCC can't generate ZOL for core cache flush loops.
+ * Conv them into iterations based as opposed to while (start < end) types
+ *
+ * Vineetg: July 2009
+ * -In I-cache flush routine we used to chk for aliasing for every line INV.
+ * Instead now we setup routines per cache geometry and invoke them
+ * via function pointers.
+ *
+ * Vineetg: Jan 2009
+ * -Cache Line flush routines used to flush an extra line beyond end addr
+ * because check was while (end >= start) instead of (end > start)
+ * =Some call sites had to work around by doing -1, -4 etc to end param
+ * =Some callers didnt care. This was spec bad in case of INV routines
+ * which would discard valid data (cause of the horrible ext2 bug
+ * in ARC IDE driver)
+ *
+ * vineetg: June 11th 2008: Fixed flush_icache_range( )
+ * -Since ARC700 caches are not coherent (I$ doesnt snoop D$) both need
+ * to be flushed, which it was not doing.
+ * -load_module( ) passes vmalloc addr (Kernel Virtual Addr) to the API,
+ * however ARC cache maintenance OPs require PHY addr. Thus need to do
+ * vmalloc_to_phy.
+ * -Also added optimisation there, that for range > PAGE SIZE we flush the
+ * entire cache in one shot rather than line by line. For e.g. a module
+ * with Code sz 600k, old code flushed 600k worth of cache (line-by-line),
+ * while cache is only 16 or 32k.
+ */
+
+#include <linux/module.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/cache.h>
+#include <linux/mmu_context.h>
+#include <linux/syscalls.h>
+#include <linux/uaccess.h>
+#include <linux/pagemap.h>
+#include <asm/cacheflush.h>
+#include <asm/cachectl.h>
+#include <asm/setup.h>
+
+char *arc_cache_mumbojumbo(int c, char *buf, int len)
+{
+ int n = 0;
+
+#define PR_CACHE(p, cfg, str) \
+ if (!(p)->ver) \
+ n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
+ else \
+ n += scnprintf(buf + n, len - n, \
+ str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \
+ (p)->sz_k, (p)->assoc, (p)->line_len, \
+ (p)->vipt ? "VIPT" : "PIPT", \
+ (p)->alias ? " aliasing" : "", \
+ IS_ENABLED(cfg) ? "" : " (not used)");
+
+ PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
+ PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
+
+ return buf;
+}
+
+/*
+ * Read the Cache Build Confuration Registers, Decode them and save into
+ * the cpuinfo structure for later use.
+ * No Validation done here, simply read/convert the BCRs
+ */
+void read_decode_cache_bcr(void)
+{
+ struct cpuinfo_arc_cache *p_ic, *p_dc;
+ unsigned int cpu = smp_processor_id();
+ struct bcr_cache {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
+#else
+ unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
+#endif
+ } ibcr, dbcr;
+
+ p_ic = &cpuinfo_arc700[cpu].icache;
+ READ_BCR(ARC_REG_IC_BCR, ibcr);
+
+ if (!ibcr.ver)
+ goto dc_chk;
+
+ BUG_ON(ibcr.config != 3);
+ p_ic->assoc = 2; /* Fixed to 2w set assoc */
+ p_ic->line_len = 8 << ibcr.line_len;
+ p_ic->sz_k = 1 << (ibcr.sz - 1);
+ p_ic->ver = ibcr.ver;
+ p_ic->vipt = 1;
+ p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
+
+dc_chk:
+ p_dc = &cpuinfo_arc700[cpu].dcache;
+ READ_BCR(ARC_REG_DC_BCR, dbcr);
+
+ if (!dbcr.ver)
+ return;
+
+ BUG_ON(dbcr.config != 2);
+ p_dc->assoc = 4; /* Fixed to 4w set assoc */
+ p_dc->line_len = 16 << dbcr.line_len;
+ p_dc->sz_k = 1 << (dbcr.sz - 1);
+ p_dc->ver = dbcr.ver;
+ p_dc->vipt = 1;
+ p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
+}
+
+/*
+ * 1. Validate the Cache Geomtery (compile time config matches hardware)
+ * 2. If I-cache suffers from aliasing, setup work arounds (difft flush rtn)
+ * (aliasing D-cache configurations are not supported YET)
+ * 3. Enable the Caches, setup default flush mode for D-Cache
+ * 3. Calculate the SHMLBA used by user space
+ */
+void arc_cache_init(void)
+{
+ unsigned int __maybe_unused cpu = smp_processor_id();
+ char str[256];
+
+ printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
+ struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
+
+ if (!ic->ver)
+ panic("cache support enabled but non-existent cache\n");
+
+ if (ic->line_len != L1_CACHE_BYTES)
+ panic("ICache line [%d] != kernel Config [%d]",
+ ic->line_len, L1_CACHE_BYTES);
+
+ if (ic->ver != CONFIG_ARC_MMU_VER)
+ panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
+ ic->ver, CONFIG_ARC_MMU_VER);
+ }
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
+ struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
+ int handled;
+
+ if (!dc->ver)
+ panic("cache support enabled but non-existent cache\n");
+
+ if (dc->line_len != L1_CACHE_BYTES)
+ panic("DCache line [%d] != kernel Config [%d]",
+ dc->line_len, L1_CACHE_BYTES);
+
+ /* check for D-Cache aliasing */
+ handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
+
+ if (dc->alias && !handled)
+ panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+ else if (!dc->alias && handled)
+ panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n");
+ }
+}
+
+#define OP_INV 0x1
+#define OP_FLUSH 0x2
+#define OP_FLUSH_N_INV 0x3
+#define OP_INV_IC 0x4
+
+/*
+ * Common Helper for Line Operations on {I,D}-Cache
+ */
+static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
+ unsigned long sz, const int cacheop)
+{
+ unsigned int aux_cmd, aux_tag;
+ int num_lines;
+ const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
+
+ if (cacheop == OP_INV_IC) {
+ aux_cmd = ARC_REG_IC_IVIL;
+#if (CONFIG_ARC_MMU_VER > 2)
+ aux_tag = ARC_REG_IC_PTAG;
+#endif
+ }
+ else {
+ /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
+ aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
+#if (CONFIG_ARC_MMU_VER > 2)
+ aux_tag = ARC_REG_DC_PTAG;
+#endif
+ }
+
+ /* Ensure we properly floor/ceil the non-line aligned/sized requests
+ * and have @paddr - aligned to cache line and integral @num_lines.
+ * This however can be avoided for page sized since:
+ * -@paddr will be cache-line aligned already (being page aligned)
+ * -@sz will be integral multiple of line size (being page sized).
+ */
+ if (!full_page_op) {
+ sz += paddr & ~CACHE_LINE_MASK;
+ paddr &= CACHE_LINE_MASK;
+ vaddr &= CACHE_LINE_MASK;
+ }
+
+ num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
+
+#if (CONFIG_ARC_MMU_VER <= 2)
+ /* MMUv2 and before: paddr contains stuffed vaddrs bits */
+ paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
+#else
+ /* if V-P const for loop, PTAG can be written once outside loop */
+ if (full_page_op)
+ write_aux_reg(aux_tag, paddr);
+#endif
+
+ while (num_lines-- > 0) {
+#if (CONFIG_ARC_MMU_VER > 2)
+ /* MMUv3, cache ops require paddr seperately */
+ if (!full_page_op) {
+ write_aux_reg(aux_tag, paddr);
+ paddr += L1_CACHE_BYTES;
+ }
+
+ write_aux_reg(aux_cmd, vaddr);
+ vaddr += L1_CACHE_BYTES;
+#else
+ write_aux_reg(aux_cmd, paddr);
+ paddr += L1_CACHE_BYTES;
+#endif
+ }
+}
+
+#ifdef CONFIG_ARC_HAS_DCACHE
+
+/***************************************************************
+ * Machine specific helpers for Entire D-Cache or Per Line ops
+ */
+
+static inline unsigned int __before_dc_op(const int op)
+{
+ unsigned int reg = reg;
+
+ if (op == OP_FLUSH_N_INV) {
+ /* Dcache provides 2 cmd: FLUSH or INV
+ * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
+ * flush-n-inv is achieved by INV cmd but with IM=1
+ * So toggle INV sub-mode depending on op request and default
+ */
+ reg = read_aux_reg(ARC_REG_DC_CTRL);
+ write_aux_reg(ARC_REG_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH)
+ ;
+ }
+
+ return reg;
+}
+
+static inline void __after_dc_op(const int op, unsigned int reg)
+{
+ if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
+ while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS);
+
+ /* Switch back to default Invalidate mode */
+ if (op == OP_FLUSH_N_INV)
+ write_aux_reg(ARC_REG_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH);
+}
+
+/*
+ * Operation on Entire D-Cache
+ * @cacheop = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
+ * Note that constant propagation ensures all the checks are gone
+ * in generated code
+ */
+static inline void __dc_entire_op(const int cacheop)
+{
+ unsigned int ctrl_reg;
+ int aux;
+
+ ctrl_reg = __before_dc_op(cacheop);
+
+ if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */
+ aux = ARC_REG_DC_IVDC;
+ else
+ aux = ARC_REG_DC_FLSH;
+
+ write_aux_reg(aux, 0x1);
+
+ __after_dc_op(cacheop, ctrl_reg);
+}
+
+/* For kernel mappings cache operation: index is same as paddr */
+#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
+
+/*
+ * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback)
+ */
+static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
+ unsigned long sz, const int cacheop)
+{
+ unsigned long flags;
+ unsigned int ctrl_reg;
+
+ local_irq_save(flags);
+
+ ctrl_reg = __before_dc_op(cacheop);
+
+ __cache_line_loop(paddr, vaddr, sz, cacheop);
+
+ __after_dc_op(cacheop, ctrl_reg);
+
+ local_irq_restore(flags);
+}
+
+#else
+
+#define __dc_entire_op(cacheop)
+#define __dc_line_op(paddr, vaddr, sz, cacheop)
+#define __dc_line_op_k(paddr, sz, cacheop)
+
+#endif /* CONFIG_ARC_HAS_DCACHE */
+
+
+#ifdef CONFIG_ARC_HAS_ICACHE
+
+/*
+ * I-Cache Aliasing in ARC700 VIPT caches
+ *
+ * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
+ * The orig Cache Management Module "CDU" only required paddr to invalidate a
+ * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
+ * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
+ * the exact same line.
+ *
+ * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
+ * paddr alone could not be used to correctly index the cache.
+ *
+ * ------------------
+ * MMU v1/v2 (Fixed Page Size 8k)
+ * ------------------
+ * The solution was to provide CDU with these additonal vaddr bits. These
+ * would be bits [x:13], x would depend on cache-geometry, 13 comes from
+ * standard page size of 8k.
+ * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
+ * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
+ * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
+ * represent the offset within cache-line. The adv of using this "clumsy"
+ * interface for additional info was no new reg was needed in CDU programming
+ * model.
+ *
+ * 17:13 represented the max num of bits passable, actual bits needed were
+ * fewer, based on the num-of-aliases possible.
+ * -for 2 alias possibility, only bit 13 needed (32K cache)
+ * -for 4 alias possibility, bits 14:13 needed (64K cache)
+ *
+ * ------------------
+ * MMU v3
+ * ------------------
+ * This ver of MMU supports variable page sizes (1k-16k): although Linux will
+ * only support 8k (default), 16k and 4k.
+ * However from hardware perspective, smaller page sizes aggrevate aliasing
+ * meaning more vaddr bits needed to disambiguate the cache-line-op ;
+ * the existing scheme of piggybacking won't work for certain configurations.
+ * Two new registers IC_PTAG and DC_PTAG inttoduced.
+ * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
+ */
+
+/***********************************************************
+ * Machine specific helper for per line I-Cache invalidate.
+ */
+
+static inline void __ic_entire_inv(void)
+{
+ write_aux_reg(ARC_REG_IC_IVIC, 1);
+ read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
+}
+
+static inline void
+__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
+ unsigned long sz)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ __cache_line_loop(paddr, vaddr, sz, OP_INV_IC);
+ local_irq_restore(flags);
+}
+
+#ifndef CONFIG_SMP
+
+#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s)
+
+#else
+
+struct ic_inv_args {
+ unsigned long paddr, vaddr;
+ int sz;
+};
+
+static void __ic_line_inv_vaddr_helper(void *info)
+{
+ struct ic_inv_args *ic_inv = info;
+
+ __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
+}
+
+static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
+ unsigned long sz)
+{
+ struct ic_inv_args ic_inv = {
+ .paddr = paddr,
+ .vaddr = vaddr,
+ .sz = sz
+ };
+
+ on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
+}
+
+#endif /* CONFIG_SMP */
+
+#else /* !CONFIG_ARC_HAS_ICACHE */
+
+#define __ic_entire_inv()
+#define __ic_line_inv_vaddr(pstart, vstart, sz)
+
+#endif /* CONFIG_ARC_HAS_ICACHE */
+
+
+/***********************************************************
+ * Exported APIs
+ */
+
+/*
+ * Handle cache congruency of kernel and userspace mappings of page when kernel
+ * writes-to/reads-from
+ *
+ * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
+ * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
+ * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
+ * -In SMP, if hardware caches are coherent
+ *
+ * There's a corollary case, where kernel READs from a userspace mapped page.
+ * If the U-mapping is not congruent to to K-mapping, former needs flushing.
+ */
+void flush_dcache_page(struct page *page)
+{
+ struct address_space *mapping;
+
+ if (!cache_is_vipt_aliasing()) {
+ clear_bit(PG_dc_clean, &page->flags);
+ return;
+ }
+
+ /* don't handle anon pages here */
+ mapping = page_mapping(page);
+ if (!mapping)
+ return;
+
+ /*
+ * pagecache page, file not yet mapped to userspace
+ * Make a note that K-mapping is dirty
+ */
+ if (!mapping_mapped(mapping)) {
+ clear_bit(PG_dc_clean, &page->flags);
+ } else if (page_mapped(page)) {
+
+ /* kernel reading from page with U-mapping */
+ unsigned long paddr = (unsigned long)page_address(page);
+ unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
+
+ if (addr_not_cache_congruent(paddr, vaddr))
+ __flush_dcache_page(paddr, vaddr);
+ }
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+
+void dma_cache_wback_inv(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_FLUSH_N_INV);
+}
+EXPORT_SYMBOL(dma_cache_wback_inv);
+
+void dma_cache_inv(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_INV);
+}
+EXPORT_SYMBOL(dma_cache_inv);
+
+void dma_cache_wback(unsigned long start, unsigned long sz)
+{
+ __dc_line_op_k(start, sz, OP_FLUSH);
+}
+EXPORT_SYMBOL(dma_cache_wback);
+
+/*
+ * This is API for making I/D Caches consistent when modifying
+ * kernel code (loadable modules, kprobes, kgdb...)
+ * This is called on insmod, with kernel virtual address for CODE of
+ * the module. ARC cache maintenance ops require PHY address thus we
+ * need to convert vmalloc addr to PHY addr
+ */
+void flush_icache_range(unsigned long kstart, unsigned long kend)
+{
+ unsigned int tot_sz;
+
+ WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
+
+ /* Shortcut for bigger flush ranges.
+ * Here we don't care if this was kernel virtual or phy addr
+ */
+ tot_sz = kend - kstart;
+ if (tot_sz > PAGE_SIZE) {
+ flush_cache_all();
+ return;
+ }
+
+ /* Case: Kernel Phy addr (0x8000_0000 onwards) */
+ if (likely(kstart > PAGE_OFFSET)) {
+ /*
+ * The 2nd arg despite being paddr will be used to index icache
+ * This is OK since no alternate virtual mappings will exist
+ * given the callers for this case: kprobe/kgdb in built-in
+ * kernel code only.
+ */
+ __sync_icache_dcache(kstart, kstart, kend - kstart);
+ return;
+ }
+
+ /*
+ * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff)
+ * (1) ARC Cache Maintenance ops only take Phy addr, hence special
+ * handling of kernel vaddr.
+ *
+ * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already),
+ * it still needs to handle a 2 page scenario, where the range
+ * straddles across 2 virtual pages and hence need for loop
+ */
+ while (tot_sz > 0) {
+ unsigned int off, sz;
+ unsigned long phy, pfn;
+
+ off = kstart % PAGE_SIZE;
+ pfn = vmalloc_to_pfn((void *)kstart);
+ phy = (pfn << PAGE_SHIFT) + off;
+ sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
+ __sync_icache_dcache(phy, kstart, sz);
+ kstart += sz;
+ tot_sz -= sz;
+ }
+}
+EXPORT_SYMBOL(flush_icache_range);
+
+/*
+ * General purpose helper to make I and D cache lines consistent.
+ * @paddr is phy addr of region
+ * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
+ * However in one instance, when called by kprobe (for a breakpt in
+ * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
+ * use a paddr to index the cache (despite VIPT). This is fine since since a
+ * builtin kernel page will not have any virtual mappings.
+ * kprobe on loadable module will be kernel vaddr.
+ */
+void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
+{
+ __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
+ __ic_line_inv_vaddr(paddr, vaddr, len);
+}
+
+/* wrapper to compile time eliminate alignment checks in flush loop */
+void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
+{
+ __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
+}
+
+/*
+ * wrapper to clearout kernel or userspace mappings of a page
+ * For kernel mappings @vaddr == @paddr
+ */
+void __flush_dcache_page(unsigned long paddr, unsigned long vaddr)
+{
+ __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
+}
+
+noinline void flush_cache_all(void)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ __ic_entire_inv();
+ __dc_entire_op(OP_FLUSH_N_INV);
+
+ local_irq_restore(flags);
+
+}
+
+#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+ flush_cache_all();
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
+ unsigned long pfn)
+{
+ unsigned int paddr = pfn << PAGE_SHIFT;
+
+ u_vaddr &= PAGE_MASK;
+
+ __flush_dcache_page(paddr, u_vaddr);
+
+ if (vma->vm_flags & VM_EXEC)
+ __inv_icache_page(paddr, u_vaddr);
+}
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ flush_cache_all();
+}
+
+void flush_anon_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long u_vaddr)
+{
+ /* TBD: do we really need to clear the kernel mapping */
+ __flush_dcache_page(page_address(page), u_vaddr);
+ __flush_dcache_page(page_address(page), page_address(page));
+
+}
+
+#endif
+
+void copy_user_highpage(struct page *to, struct page *from,
+ unsigned long u_vaddr, struct vm_area_struct *vma)
+{
+ unsigned long kfrom = (unsigned long)page_address(from);
+ unsigned long kto = (unsigned long)page_address(to);
+ int clean_src_k_mappings = 0;
+
+ /*
+ * If SRC page was already mapped in userspace AND it's U-mapping is
+ * not congruent with K-mapping, sync former to physical page so that
+ * K-mapping in memcpy below, sees the right data
+ *
+ * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
+ * equally valid for SRC page as well
+ */
+ if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
+ __flush_dcache_page(kfrom, u_vaddr);
+ clean_src_k_mappings = 1;
+ }
+
+ copy_page((void *)kto, (void *)kfrom);
+
+ /*
+ * Mark DST page K-mapping as dirty for a later finalization by
+ * update_mmu_cache(). Although the finalization could have been done
+ * here as well (given that both vaddr/paddr are available).
+ * But update_mmu_cache() already has code to do that for other
+ * non copied user pages (e.g. read faults which wire in pagecache page
+ * directly).
+ */
+ clear_bit(PG_dc_clean, &to->flags);
+
+ /*
+ * if SRC was already usermapped and non-congruent to kernel mapping
+ * sync the kernel mapping back to physical page
+ */
+ if (clean_src_k_mappings) {
+ __flush_dcache_page(kfrom, kfrom);
+ set_bit(PG_dc_clean, &from->flags);
+ } else {
+ clear_bit(PG_dc_clean, &from->flags);
+ }
+}
+
+void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
+{
+ clear_page(to);
+ clear_bit(PG_dc_clean, &page->flags);
+}
+
+
+/**********************************************************************
+ * Explicit Cache flush request from user space via syscall
+ * Needed for JITs which generate code on the fly
+ */
+SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
+{
+ /* TBD: optimize this */
+ flush_cache_all();
+ return 0;
+}
+++ /dev/null
-/*
- * ARC700 VIPT Cache Management
- *
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: May 2011: for Non-aliasing VIPT D-cache following can be NOPs
- * -flush_cache_dup_mm (fork)
- * -likewise for flush_cache_mm (exit/execve)
- * -likewise for flush_cache_range,flush_cache_page (munmap, exit, COW-break)
- *
- * vineetg: Apr 2011
- * -Now that MMU can support larger pg sz (16K), the determiniation of
- * aliasing shd not be based on assumption of 8k pg
- *
- * vineetg: Mar 2011
- * -optimised version of flush_icache_range( ) for making I/D coherent
- * when vaddr is available (agnostic of num of aliases)
- *
- * vineetg: Mar 2011
- * -Added documentation about I-cache aliasing on ARC700 and the way it
- * was handled up until MMU V2.
- * -Spotted a three year old bug when killing the 4 aliases, which needs
- * bottom 2 bits, so we need to do paddr | {0x00, 0x01, 0x02, 0x03}
- * instead of paddr | {0x00, 0x01, 0x10, 0x11}
- * (Rajesh you owe me one now)
- *
- * vineetg: Dec 2010
- * -Off-by-one error when computing num_of_lines to flush
- * This broke signal handling with bionic which uses synthetic sigret stub
- *
- * vineetg: Mar 2010
- * -GCC can't generate ZOL for core cache flush loops.
- * Conv them into iterations based as opposed to while (start < end) types
- *
- * Vineetg: July 2009
- * -In I-cache flush routine we used to chk for aliasing for every line INV.
- * Instead now we setup routines per cache geometry and invoke them
- * via function pointers.
- *
- * Vineetg: Jan 2009
- * -Cache Line flush routines used to flush an extra line beyond end addr
- * because check was while (end >= start) instead of (end > start)
- * =Some call sites had to work around by doing -1, -4 etc to end param
- * =Some callers didnt care. This was spec bad in case of INV routines
- * which would discard valid data (cause of the horrible ext2 bug
- * in ARC IDE driver)
- *
- * vineetg: June 11th 2008: Fixed flush_icache_range( )
- * -Since ARC700 caches are not coherent (I$ doesnt snoop D$) both need
- * to be flushed, which it was not doing.
- * -load_module( ) passes vmalloc addr (Kernel Virtual Addr) to the API,
- * however ARC cache maintenance OPs require PHY addr. Thus need to do
- * vmalloc_to_phy.
- * -Also added optimisation there, that for range > PAGE SIZE we flush the
- * entire cache in one shot rather than line by line. For e.g. a module
- * with Code sz 600k, old code flushed 600k worth of cache (line-by-line),
- * while cache is only 16 or 32k.
- */
-
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/cache.h>
-#include <linux/mmu_context.h>
-#include <linux/syscalls.h>
-#include <linux/uaccess.h>
-#include <linux/pagemap.h>
-#include <asm/cacheflush.h>
-#include <asm/cachectl.h>
-#include <asm/setup.h>
-
-char *arc_cache_mumbojumbo(int c, char *buf, int len)
-{
- int n = 0;
-
-#define PR_CACHE(p, cfg, str) \
- if (!(p)->ver) \
- n += scnprintf(buf + n, len - n, str"\t\t: N/A\n"); \
- else \
- n += scnprintf(buf + n, len - n, \
- str"\t\t: %uK, %dway/set, %uB Line, %s%s%s\n", \
- (p)->sz_k, (p)->assoc, (p)->line_len, \
- (p)->vipt ? "VIPT" : "PIPT", \
- (p)->alias ? " aliasing" : "", \
- IS_ENABLED(cfg) ? "" : " (not used)");
-
- PR_CACHE(&cpuinfo_arc700[c].icache, CONFIG_ARC_HAS_ICACHE, "I-Cache");
- PR_CACHE(&cpuinfo_arc700[c].dcache, CONFIG_ARC_HAS_DCACHE, "D-Cache");
-
- return buf;
-}
-
-/*
- * Read the Cache Build Confuration Registers, Decode them and save into
- * the cpuinfo structure for later use.
- * No Validation done here, simply read/convert the BCRs
- */
-void read_decode_cache_bcr(void)
-{
- struct cpuinfo_arc_cache *p_ic, *p_dc;
- unsigned int cpu = smp_processor_id();
- struct bcr_cache {
-#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad:12, line_len:4, sz:4, config:4, ver:8;
-#else
- unsigned int ver:8, config:4, sz:4, line_len:4, pad:12;
-#endif
- } ibcr, dbcr;
-
- p_ic = &cpuinfo_arc700[cpu].icache;
- READ_BCR(ARC_REG_IC_BCR, ibcr);
-
- if (!ibcr.ver)
- goto dc_chk;
-
- BUG_ON(ibcr.config != 3);
- p_ic->assoc = 2; /* Fixed to 2w set assoc */
- p_ic->line_len = 8 << ibcr.line_len;
- p_ic->sz_k = 1 << (ibcr.sz - 1);
- p_ic->ver = ibcr.ver;
- p_ic->vipt = 1;
- p_ic->alias = p_ic->sz_k/p_ic->assoc/TO_KB(PAGE_SIZE) > 1;
-
-dc_chk:
- p_dc = &cpuinfo_arc700[cpu].dcache;
- READ_BCR(ARC_REG_DC_BCR, dbcr);
-
- if (!dbcr.ver)
- return;
-
- BUG_ON(dbcr.config != 2);
- p_dc->assoc = 4; /* Fixed to 4w set assoc */
- p_dc->line_len = 16 << dbcr.line_len;
- p_dc->sz_k = 1 << (dbcr.sz - 1);
- p_dc->ver = dbcr.ver;
- p_dc->vipt = 1;
- p_dc->alias = p_dc->sz_k/p_dc->assoc/TO_KB(PAGE_SIZE) > 1;
-}
-
-/*
- * 1. Validate the Cache Geomtery (compile time config matches hardware)
- * 2. If I-cache suffers from aliasing, setup work arounds (difft flush rtn)
- * (aliasing D-cache configurations are not supported YET)
- * 3. Enable the Caches, setup default flush mode for D-Cache
- * 3. Calculate the SHMLBA used by user space
- */
-void arc_cache_init(void)
-{
- unsigned int __maybe_unused cpu = smp_processor_id();
- char str[256];
-
- printk(arc_cache_mumbojumbo(0, str, sizeof(str)));
-
- if (IS_ENABLED(CONFIG_ARC_HAS_ICACHE)) {
- struct cpuinfo_arc_cache *ic = &cpuinfo_arc700[cpu].icache;
-
- if (!ic->ver)
- panic("cache support enabled but non-existent cache\n");
-
- if (ic->line_len != L1_CACHE_BYTES)
- panic("ICache line [%d] != kernel Config [%d]",
- ic->line_len, L1_CACHE_BYTES);
-
- if (ic->ver != CONFIG_ARC_MMU_VER)
- panic("Cache ver [%d] doesn't match MMU ver [%d]\n",
- ic->ver, CONFIG_ARC_MMU_VER);
- }
-
- if (IS_ENABLED(CONFIG_ARC_HAS_DCACHE)) {
- struct cpuinfo_arc_cache *dc = &cpuinfo_arc700[cpu].dcache;
- int handled;
-
- if (!dc->ver)
- panic("cache support enabled but non-existent cache\n");
-
- if (dc->line_len != L1_CACHE_BYTES)
- panic("DCache line [%d] != kernel Config [%d]",
- dc->line_len, L1_CACHE_BYTES);
-
- /* check for D-Cache aliasing */
- handled = IS_ENABLED(CONFIG_ARC_CACHE_VIPT_ALIASING);
-
- if (dc->alias && !handled)
- panic("Enable CONFIG_ARC_CACHE_VIPT_ALIASING\n");
- else if (!dc->alias && handled)
- panic("Don't need CONFIG_ARC_CACHE_VIPT_ALIASING\n");
- }
-}
-
-#define OP_INV 0x1
-#define OP_FLUSH 0x2
-#define OP_FLUSH_N_INV 0x3
-#define OP_INV_IC 0x4
-
-/*
- * Common Helper for Line Operations on {I,D}-Cache
- */
-static inline void __cache_line_loop(unsigned long paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop)
-{
- unsigned int aux_cmd, aux_tag;
- int num_lines;
- const int full_page_op = __builtin_constant_p(sz) && sz == PAGE_SIZE;
-
- if (cacheop == OP_INV_IC) {
- aux_cmd = ARC_REG_IC_IVIL;
-#if (CONFIG_ARC_MMU_VER > 2)
- aux_tag = ARC_REG_IC_PTAG;
-#endif
- }
- else {
- /* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
- aux_cmd = cacheop & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
-#if (CONFIG_ARC_MMU_VER > 2)
- aux_tag = ARC_REG_DC_PTAG;
-#endif
- }
-
- /* Ensure we properly floor/ceil the non-line aligned/sized requests
- * and have @paddr - aligned to cache line and integral @num_lines.
- * This however can be avoided for page sized since:
- * -@paddr will be cache-line aligned already (being page aligned)
- * -@sz will be integral multiple of line size (being page sized).
- */
- if (!full_page_op) {
- sz += paddr & ~CACHE_LINE_MASK;
- paddr &= CACHE_LINE_MASK;
- vaddr &= CACHE_LINE_MASK;
- }
-
- num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
-
-#if (CONFIG_ARC_MMU_VER <= 2)
- /* MMUv2 and before: paddr contains stuffed vaddrs bits */
- paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-#else
- /* if V-P const for loop, PTAG can be written once outside loop */
- if (full_page_op)
- write_aux_reg(aux_tag, paddr);
-#endif
-
- while (num_lines-- > 0) {
-#if (CONFIG_ARC_MMU_VER > 2)
- /* MMUv3, cache ops require paddr seperately */
- if (!full_page_op) {
- write_aux_reg(aux_tag, paddr);
- paddr += L1_CACHE_BYTES;
- }
-
- write_aux_reg(aux_cmd, vaddr);
- vaddr += L1_CACHE_BYTES;
-#else
- write_aux_reg(aux_cmd, paddr);
- paddr += L1_CACHE_BYTES;
-#endif
- }
-}
-
-#ifdef CONFIG_ARC_HAS_DCACHE
-
-/***************************************************************
- * Machine specific helpers for Entire D-Cache or Per Line ops
- */
-
-static inline unsigned int __before_dc_op(const int op)
-{
- unsigned int reg = reg;
-
- if (op == OP_FLUSH_N_INV) {
- /* Dcache provides 2 cmd: FLUSH or INV
- * INV inturn has sub-modes: DISCARD or FLUSH-BEFORE
- * flush-n-inv is achieved by INV cmd but with IM=1
- * So toggle INV sub-mode depending on op request and default
- */
- reg = read_aux_reg(ARC_REG_DC_CTRL);
- write_aux_reg(ARC_REG_DC_CTRL, reg | DC_CTRL_INV_MODE_FLUSH)
- ;
- }
-
- return reg;
-}
-
-static inline void __after_dc_op(const int op, unsigned int reg)
-{
- if (op & OP_FLUSH) /* flush / flush-n-inv both wait */
- while (read_aux_reg(ARC_REG_DC_CTRL) & DC_CTRL_FLUSH_STATUS);
-
- /* Switch back to default Invalidate mode */
- if (op == OP_FLUSH_N_INV)
- write_aux_reg(ARC_REG_DC_CTRL, reg & ~DC_CTRL_INV_MODE_FLUSH);
-}
-
-/*
- * Operation on Entire D-Cache
- * @cacheop = {OP_INV, OP_FLUSH, OP_FLUSH_N_INV}
- * Note that constant propagation ensures all the checks are gone
- * in generated code
- */
-static inline void __dc_entire_op(const int cacheop)
-{
- unsigned int ctrl_reg;
- int aux;
-
- ctrl_reg = __before_dc_op(cacheop);
-
- if (cacheop & OP_INV) /* Inv or flush-n-inv use same cmd reg */
- aux = ARC_REG_DC_IVDC;
- else
- aux = ARC_REG_DC_FLSH;
-
- write_aux_reg(aux, 0x1);
-
- __after_dc_op(cacheop, ctrl_reg);
-}
-
-/* For kernel mappings cache operation: index is same as paddr */
-#define __dc_line_op_k(p, sz, op) __dc_line_op(p, p, sz, op)
-
-/*
- * D-Cache : Per Line INV (discard or wback+discard) or FLUSH (wback)
- */
-static inline void __dc_line_op(unsigned long paddr, unsigned long vaddr,
- unsigned long sz, const int cacheop)
-{
- unsigned long flags;
- unsigned int ctrl_reg;
-
- local_irq_save(flags);
-
- ctrl_reg = __before_dc_op(cacheop);
-
- __cache_line_loop(paddr, vaddr, sz, cacheop);
-
- __after_dc_op(cacheop, ctrl_reg);
-
- local_irq_restore(flags);
-}
-
-#else
-
-#define __dc_entire_op(cacheop)
-#define __dc_line_op(paddr, vaddr, sz, cacheop)
-#define __dc_line_op_k(paddr, sz, cacheop)
-
-#endif /* CONFIG_ARC_HAS_DCACHE */
-
-
-#ifdef CONFIG_ARC_HAS_ICACHE
-
-/*
- * I-Cache Aliasing in ARC700 VIPT caches
- *
- * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
- * The orig Cache Management Module "CDU" only required paddr to invalidate a
- * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
- * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
- * the exact same line.
- *
- * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
- * paddr alone could not be used to correctly index the cache.
- *
- * ------------------
- * MMU v1/v2 (Fixed Page Size 8k)
- * ------------------
- * The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geometry, 13 comes from
- * standard page size of 8k.
- * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
- * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
- * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
- * represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU programming
- * model.
- *
- * 17:13 represented the max num of bits passable, actual bits needed were
- * fewer, based on the num-of-aliases possible.
- * -for 2 alias possibility, only bit 13 needed (32K cache)
- * -for 4 alias possibility, bits 14:13 needed (64K cache)
- *
- * ------------------
- * MMU v3
- * ------------------
- * This ver of MMU supports variable page sizes (1k-16k): although Linux will
- * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggrevate aliasing
- * meaning more vaddr bits needed to disambiguate the cache-line-op ;
- * the existing scheme of piggybacking won't work for certain configurations.
- * Two new registers IC_PTAG and DC_PTAG inttoduced.
- * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
- */
-
-/***********************************************************
- * Machine specific helper for per line I-Cache invalidate.
- */
-
-static inline void __ic_entire_inv(void)
-{
- write_aux_reg(ARC_REG_IC_IVIC, 1);
- read_aux_reg(ARC_REG_IC_CTRL); /* blocks */
-}
-
-static inline void
-__ic_line_inv_vaddr_local(unsigned long paddr, unsigned long vaddr,
- unsigned long sz)
-{
- unsigned long flags;
-
- local_irq_save(flags);
- __cache_line_loop(paddr, vaddr, sz, OP_INV_IC);
- local_irq_restore(flags);
-}
-
-#ifndef CONFIG_SMP
-
-#define __ic_line_inv_vaddr(p, v, s) __ic_line_inv_vaddr_local(p, v, s)
-
-#else
-
-struct ic_inv_args {
- unsigned long paddr, vaddr;
- int sz;
-};
-
-static void __ic_line_inv_vaddr_helper(void *info)
-{
- struct ic_inv_args *ic_inv = info;
-
- __ic_line_inv_vaddr_local(ic_inv->paddr, ic_inv->vaddr, ic_inv->sz);
-}
-
-static void __ic_line_inv_vaddr(unsigned long paddr, unsigned long vaddr,
- unsigned long sz)
-{
- struct ic_inv_args ic_inv = {
- .paddr = paddr,
- .vaddr = vaddr,
- .sz = sz
- };
-
- on_each_cpu(__ic_line_inv_vaddr_helper, &ic_inv, 1);
-}
-
-#endif /* CONFIG_SMP */
-
-#else /* !CONFIG_ARC_HAS_ICACHE */
-
-#define __ic_entire_inv()
-#define __ic_line_inv_vaddr(pstart, vstart, sz)
-
-#endif /* CONFIG_ARC_HAS_ICACHE */
-
-
-/***********************************************************
- * Exported APIs
- */
-
-/*
- * Handle cache congruency of kernel and userspace mappings of page when kernel
- * writes-to/reads-from
- *
- * The idea is to defer flushing of kernel mapping after a WRITE, possible if:
- * -dcache is NOT aliasing, hence any U/K-mappings of page are congruent
- * -U-mapping doesn't exist yet for page (finalised in update_mmu_cache)
- * -In SMP, if hardware caches are coherent
- *
- * There's a corollary case, where kernel READs from a userspace mapped page.
- * If the U-mapping is not congruent to to K-mapping, former needs flushing.
- */
-void flush_dcache_page(struct page *page)
-{
- struct address_space *mapping;
-
- if (!cache_is_vipt_aliasing()) {
- clear_bit(PG_dc_clean, &page->flags);
- return;
- }
-
- /* don't handle anon pages here */
- mapping = page_mapping(page);
- if (!mapping)
- return;
-
- /*
- * pagecache page, file not yet mapped to userspace
- * Make a note that K-mapping is dirty
- */
- if (!mapping_mapped(mapping)) {
- clear_bit(PG_dc_clean, &page->flags);
- } else if (page_mapped(page)) {
-
- /* kernel reading from page with U-mapping */
- unsigned long paddr = (unsigned long)page_address(page);
- unsigned long vaddr = page->index << PAGE_CACHE_SHIFT;
-
- if (addr_not_cache_congruent(paddr, vaddr))
- __flush_dcache_page(paddr, vaddr);
- }
-}
-EXPORT_SYMBOL(flush_dcache_page);
-
-
-void dma_cache_wback_inv(unsigned long start, unsigned long sz)
-{
- __dc_line_op_k(start, sz, OP_FLUSH_N_INV);
-}
-EXPORT_SYMBOL(dma_cache_wback_inv);
-
-void dma_cache_inv(unsigned long start, unsigned long sz)
-{
- __dc_line_op_k(start, sz, OP_INV);
-}
-EXPORT_SYMBOL(dma_cache_inv);
-
-void dma_cache_wback(unsigned long start, unsigned long sz)
-{
- __dc_line_op_k(start, sz, OP_FLUSH);
-}
-EXPORT_SYMBOL(dma_cache_wback);
-
-/*
- * This is API for making I/D Caches consistent when modifying
- * kernel code (loadable modules, kprobes, kgdb...)
- * This is called on insmod, with kernel virtual address for CODE of
- * the module. ARC cache maintenance ops require PHY address thus we
- * need to convert vmalloc addr to PHY addr
- */
-void flush_icache_range(unsigned long kstart, unsigned long kend)
-{
- unsigned int tot_sz;
-
- WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
-
- /* Shortcut for bigger flush ranges.
- * Here we don't care if this was kernel virtual or phy addr
- */
- tot_sz = kend - kstart;
- if (tot_sz > PAGE_SIZE) {
- flush_cache_all();
- return;
- }
-
- /* Case: Kernel Phy addr (0x8000_0000 onwards) */
- if (likely(kstart > PAGE_OFFSET)) {
- /*
- * The 2nd arg despite being paddr will be used to index icache
- * This is OK since no alternate virtual mappings will exist
- * given the callers for this case: kprobe/kgdb in built-in
- * kernel code only.
- */
- __sync_icache_dcache(kstart, kstart, kend - kstart);
- return;
- }
-
- /*
- * Case: Kernel Vaddr (0x7000_0000 to 0x7fff_ffff)
- * (1) ARC Cache Maintenance ops only take Phy addr, hence special
- * handling of kernel vaddr.
- *
- * (2) Despite @tot_sz being < PAGE_SIZE (bigger cases handled already),
- * it still needs to handle a 2 page scenario, where the range
- * straddles across 2 virtual pages and hence need for loop
- */
- while (tot_sz > 0) {
- unsigned int off, sz;
- unsigned long phy, pfn;
-
- off = kstart % PAGE_SIZE;
- pfn = vmalloc_to_pfn((void *)kstart);
- phy = (pfn << PAGE_SHIFT) + off;
- sz = min_t(unsigned int, tot_sz, PAGE_SIZE - off);
- __sync_icache_dcache(phy, kstart, sz);
- kstart += sz;
- tot_sz -= sz;
- }
-}
-EXPORT_SYMBOL(flush_icache_range);
-
-/*
- * General purpose helper to make I and D cache lines consistent.
- * @paddr is phy addr of region
- * @vaddr is typically user vaddr (breakpoint) or kernel vaddr (vmalloc)
- * However in one instance, when called by kprobe (for a breakpt in
- * builtin kernel code) @vaddr will be paddr only, meaning CDU operation will
- * use a paddr to index the cache (despite VIPT). This is fine since since a
- * builtin kernel page will not have any virtual mappings.
- * kprobe on loadable module will be kernel vaddr.
- */
-void __sync_icache_dcache(unsigned long paddr, unsigned long vaddr, int len)
-{
- __dc_line_op(paddr, vaddr, len, OP_FLUSH_N_INV);
- __ic_line_inv_vaddr(paddr, vaddr, len);
-}
-
-/* wrapper to compile time eliminate alignment checks in flush loop */
-void __inv_icache_page(unsigned long paddr, unsigned long vaddr)
-{
- __ic_line_inv_vaddr(paddr, vaddr, PAGE_SIZE);
-}
-
-/*
- * wrapper to clearout kernel or userspace mappings of a page
- * For kernel mappings @vaddr == @paddr
- */
-void __flush_dcache_page(unsigned long paddr, unsigned long vaddr)
-{
- __dc_line_op(paddr, vaddr & PAGE_MASK, PAGE_SIZE, OP_FLUSH_N_INV);
-}
-
-noinline void flush_cache_all(void)
-{
- unsigned long flags;
-
- local_irq_save(flags);
-
- __ic_entire_inv();
- __dc_entire_op(OP_FLUSH_N_INV);
-
- local_irq_restore(flags);
-
-}
-
-#ifdef CONFIG_ARC_CACHE_VIPT_ALIASING
-
-void flush_cache_mm(struct mm_struct *mm)
-{
- flush_cache_all();
-}
-
-void flush_cache_page(struct vm_area_struct *vma, unsigned long u_vaddr,
- unsigned long pfn)
-{
- unsigned int paddr = pfn << PAGE_SHIFT;
-
- u_vaddr &= PAGE_MASK;
-
- __flush_dcache_page(paddr, u_vaddr);
-
- if (vma->vm_flags & VM_EXEC)
- __inv_icache_page(paddr, u_vaddr);
-}
-
-void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
- unsigned long end)
-{
- flush_cache_all();
-}
-
-void flush_anon_page(struct vm_area_struct *vma, struct page *page,
- unsigned long u_vaddr)
-{
- /* TBD: do we really need to clear the kernel mapping */
- __flush_dcache_page(page_address(page), u_vaddr);
- __flush_dcache_page(page_address(page), page_address(page));
-
-}
-
-#endif
-
-void copy_user_highpage(struct page *to, struct page *from,
- unsigned long u_vaddr, struct vm_area_struct *vma)
-{
- unsigned long kfrom = (unsigned long)page_address(from);
- unsigned long kto = (unsigned long)page_address(to);
- int clean_src_k_mappings = 0;
-
- /*
- * If SRC page was already mapped in userspace AND it's U-mapping is
- * not congruent with K-mapping, sync former to physical page so that
- * K-mapping in memcpy below, sees the right data
- *
- * Note that while @u_vaddr refers to DST page's userspace vaddr, it is
- * equally valid for SRC page as well
- */
- if (page_mapped(from) && addr_not_cache_congruent(kfrom, u_vaddr)) {
- __flush_dcache_page(kfrom, u_vaddr);
- clean_src_k_mappings = 1;
- }
-
- copy_page((void *)kto, (void *)kfrom);
-
- /*
- * Mark DST page K-mapping as dirty for a later finalization by
- * update_mmu_cache(). Although the finalization could have been done
- * here as well (given that both vaddr/paddr are available).
- * But update_mmu_cache() already has code to do that for other
- * non copied user pages (e.g. read faults which wire in pagecache page
- * directly).
- */
- clear_bit(PG_dc_clean, &to->flags);
-
- /*
- * if SRC was already usermapped and non-congruent to kernel mapping
- * sync the kernel mapping back to physical page
- */
- if (clean_src_k_mappings) {
- __flush_dcache_page(kfrom, kfrom);
- set_bit(PG_dc_clean, &from->flags);
- } else {
- clear_bit(PG_dc_clean, &from->flags);
- }
-}
-
-void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
-{
- clear_page(to);
- clear_bit(PG_dc_clean, &page->flags);
-}
-
-
-/**********************************************************************
- * Explicit Cache flush request from user space via syscall
- * Needed for JITs which generate code on the fly
- */
-SYSCALL_DEFINE3(cacheflush, uint32_t, start, uint32_t, sz, uint32_t, flags)
-{
- /* TBD: optimize this */
- flush_cache_all();
- return 0;
-}
projects / cascardo / linux.git / commitdiff