selftests: add memfd/sealing page-pinning tests
authorDavid Herrmann <dh.herrmann@gmail.com>
Fri, 8 Aug 2014 21:25:34 +0000 (14:25 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Fri, 8 Aug 2014 22:57:31 +0000 (15:57 -0700)
Setting SEAL_WRITE is not possible if there're pending GUP users. This
commit adds selftests for memfd+sealing that use FUSE to create pending
page-references. FUSE is very helpful here in that it allows us to delay
direct-IO operations for an arbitrary amount of time. This way, we can
force the kernel to pin pages and then run our normal selftests.

Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Cc: Ryan Lortie <desrt@desrt.ca>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Daniel Mack <zonque@gmail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
tools/testing/selftests/memfd/.gitignore
tools/testing/selftests/memfd/Makefile
tools/testing/selftests/memfd/fuse_mnt.c [new file with mode: 0644]
tools/testing/selftests/memfd/fuse_test.c [new file with mode: 0644]
tools/testing/selftests/memfd/run_fuse_test.sh [new file with mode: 0644]

index 36653b9..6816c49 100644 (file)
@@ -7,6 +7,7 @@ ifeq ($(ARCH),x86_64)
        ARCH := X86
 endif
 
+CFLAGS += -D_FILE_OFFSET_BITS=64
 CFLAGS += -I../../../../arch/x86/include/generated/uapi/
 CFLAGS += -I../../../../arch/x86/include/uapi/
 CFLAGS += -I../../../../include/uapi/
@@ -25,5 +26,16 @@ ifeq ($(ARCH),X86)
 endif
        @./memfd_test || echo "memfd_test: [FAIL]"
 
+build_fuse:
+ifeq ($(ARCH),X86)
+       gcc $(CFLAGS) fuse_mnt.c `pkg-config fuse --cflags --libs` -o fuse_mnt
+       gcc $(CFLAGS) fuse_test.c -o fuse_test
+else
+       echo "Not an x86 target, can't build memfd selftest"
+endif
+
+run_fuse: build_fuse
+       @./run_fuse_test.sh || echo "fuse_test: [FAIL]"
+
 clean:
-       $(RM) memfd_test
+       $(RM) memfd_test fuse_test
diff --git a/tools/testing/selftests/memfd/fuse_mnt.c b/tools/testing/selftests/memfd/fuse_mnt.c
new file mode 100644 (file)
index 0000000..feacf12
--- /dev/null
@@ -0,0 +1,110 @@
+/*
+ * memfd test file-system
+ * This file uses FUSE to create a dummy file-system with only one file /memfd.
+ * This file is read-only and takes 1s per read.
+ *
+ * This file-system is used by the memfd test-cases to force the kernel to pin
+ * pages during reads(). Due to the 1s delay of this file-system, this is a
+ * nice way to test race-conditions against get_user_pages() in the kernel.
+ *
+ * We use direct_io==1 to force the kernel to use direct-IO for this
+ * file-system.
+ */
+
+#define FUSE_USE_VERSION 26
+
+#include <fuse.h>
+#include <stdio.h>
+#include <string.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+
+static const char memfd_content[] = "memfd-example-content";
+static const char memfd_path[] = "/memfd";
+
+static int memfd_getattr(const char *path, struct stat *st)
+{
+       memset(st, 0, sizeof(*st));
+
+       if (!strcmp(path, "/")) {
+               st->st_mode = S_IFDIR | 0755;
+               st->st_nlink = 2;
+       } else if (!strcmp(path, memfd_path)) {
+               st->st_mode = S_IFREG | 0444;
+               st->st_nlink = 1;
+               st->st_size = strlen(memfd_content);
+       } else {
+               return -ENOENT;
+       }
+
+       return 0;
+}
+
+static int memfd_readdir(const char *path,
+                        void *buf,
+                        fuse_fill_dir_t filler,
+                        off_t offset,
+                        struct fuse_file_info *fi)
+{
+       if (strcmp(path, "/"))
+               return -ENOENT;
+
+       filler(buf, ".", NULL, 0);
+       filler(buf, "..", NULL, 0);
+       filler(buf, memfd_path + 1, NULL, 0);
+
+       return 0;
+}
+
+static int memfd_open(const char *path, struct fuse_file_info *fi)
+{
+       if (strcmp(path, memfd_path))
+               return -ENOENT;
+
+       if ((fi->flags & 3) != O_RDONLY)
+               return -EACCES;
+
+       /* force direct-IO */
+       fi->direct_io = 1;
+
+       return 0;
+}
+
+static int memfd_read(const char *path,
+                     char *buf,
+                     size_t size,
+                     off_t offset,
+                     struct fuse_file_info *fi)
+{
+       size_t len;
+
+       if (strcmp(path, memfd_path) != 0)
+               return -ENOENT;
+
+       sleep(1);
+
+       len = strlen(memfd_content);
+       if (offset < len) {
+               if (offset + size > len)
+                       size = len - offset;
+
+               memcpy(buf, memfd_content + offset, size);
+       } else {
+               size = 0;
+       }
+
+       return size;
+}
+
+static struct fuse_operations memfd_ops = {
+       .getattr        = memfd_getattr,
+       .readdir        = memfd_readdir,
+       .open           = memfd_open,
+       .read           = memfd_read,
+};
+
+int main(int argc, char *argv[])
+{
+       return fuse_main(argc, argv, &memfd_ops, NULL);
+}
diff --git a/tools/testing/selftests/memfd/fuse_test.c b/tools/testing/selftests/memfd/fuse_test.c
new file mode 100644 (file)
index 0000000..67908b1
--- /dev/null
@@ -0,0 +1,311 @@
+/*
+ * memfd GUP test-case
+ * This tests memfd interactions with get_user_pages(). We require the
+ * fuse_mnt.c program to provide a fake direct-IO FUSE mount-point for us. This
+ * file-system delays _all_ reads by 1s and forces direct-IO. This means, any
+ * read() on files in that file-system will pin the receive-buffer pages for at
+ * least 1s via get_user_pages().
+ *
+ * We use this trick to race ADD_SEALS against a write on a memfd object. The
+ * ADD_SEALS must fail if the memfd pages are still pinned. Note that we use
+ * the read() syscall with our memory-mapped memfd object as receive buffer to
+ * force the kernel to write into our memfd object.
+ */
+
+#define _GNU_SOURCE
+#define __EXPORTED_HEADERS__
+
+#include <errno.h>
+#include <inttypes.h>
+#include <limits.h>
+#include <linux/falloc.h>
+#include <linux/fcntl.h>
+#include <linux/memfd.h>
+#include <sched.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <signal.h>
+#include <string.h>
+#include <sys/mman.h>
+#include <sys/stat.h>
+#include <sys/syscall.h>
+#include <sys/wait.h>
+#include <unistd.h>
+
+#define MFD_DEF_SIZE 8192
+#define STACK_SIZE 65535
+
+static int sys_memfd_create(const char *name,
+                           unsigned int flags)
+{
+       return syscall(__NR_memfd_create, name, flags);
+}
+
+static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
+{
+       int r, fd;
+
+       fd = sys_memfd_create(name, flags);
+       if (fd < 0) {
+               printf("memfd_create(\"%s\", %u) failed: %m\n",
+                      name, flags);
+               abort();
+       }
+
+       r = ftruncate(fd, sz);
+       if (r < 0) {
+               printf("ftruncate(%llu) failed: %m\n", (unsigned long long)sz);
+               abort();
+       }
+
+       return fd;
+}
+
+static __u64 mfd_assert_get_seals(int fd)
+{
+       long r;
+
+       r = fcntl(fd, F_GET_SEALS);
+       if (r < 0) {
+               printf("GET_SEALS(%d) failed: %m\n", fd);
+               abort();
+       }
+
+       return r;
+}
+
+static void mfd_assert_has_seals(int fd, __u64 seals)
+{
+       __u64 s;
+
+       s = mfd_assert_get_seals(fd);
+       if (s != seals) {
+               printf("%llu != %llu = GET_SEALS(%d)\n",
+                      (unsigned long long)seals, (unsigned long long)s, fd);
+               abort();
+       }
+}
+
+static void mfd_assert_add_seals(int fd, __u64 seals)
+{
+       long r;
+       __u64 s;
+
+       s = mfd_assert_get_seals(fd);
+       r = fcntl(fd, F_ADD_SEALS, seals);
+       if (r < 0) {
+               printf("ADD_SEALS(%d, %llu -> %llu) failed: %m\n",
+                      fd, (unsigned long long)s, (unsigned long long)seals);
+               abort();
+       }
+}
+
+static int mfd_busy_add_seals(int fd, __u64 seals)
+{
+       long r;
+       __u64 s;
+
+       r = fcntl(fd, F_GET_SEALS);
+       if (r < 0)
+               s = 0;
+       else
+               s = r;
+
+       r = fcntl(fd, F_ADD_SEALS, seals);
+       if (r < 0 && errno != EBUSY) {
+               printf("ADD_SEALS(%d, %llu -> %llu) didn't fail as expected with EBUSY: %m\n",
+                      fd, (unsigned long long)s, (unsigned long long)seals);
+               abort();
+       }
+
+       return r;
+}
+
+static void *mfd_assert_mmap_shared(int fd)
+{
+       void *p;
+
+       p = mmap(NULL,
+                MFD_DEF_SIZE,
+                PROT_READ | PROT_WRITE,
+                MAP_SHARED,
+                fd,
+                0);
+       if (p == MAP_FAILED) {
+               printf("mmap() failed: %m\n");
+               abort();
+       }
+
+       return p;
+}
+
+static void *mfd_assert_mmap_private(int fd)
+{
+       void *p;
+
+       p = mmap(NULL,
+                MFD_DEF_SIZE,
+                PROT_READ | PROT_WRITE,
+                MAP_PRIVATE,
+                fd,
+                0);
+       if (p == MAP_FAILED) {
+               printf("mmap() failed: %m\n");
+               abort();
+       }
+
+       return p;
+}
+
+static int global_mfd = -1;
+static void *global_p = NULL;
+
+static int sealing_thread_fn(void *arg)
+{
+       int sig, r;
+
+       /*
+        * This thread first waits 200ms so any pending operation in the parent
+        * is correctly started. After that, it tries to seal @global_mfd as
+        * SEAL_WRITE. This _must_ fail as the parent thread has a read() into
+        * that memory mapped object still ongoing.
+        * We then wait one more second and try sealing again. This time it
+        * must succeed as there shouldn't be anyone else pinning the pages.
+        */
+
+       /* wait 200ms for FUSE-request to be active */
+       usleep(200000);
+
+       /* unmount mapping before sealing to avoid i_mmap_writable failures */
+       munmap(global_p, MFD_DEF_SIZE);
+
+       /* Try sealing the global file; expect EBUSY or success. Current
+        * kernels will never succeed, but in the future, kernels might
+        * implement page-replacements or other fancy ways to avoid racing
+        * writes. */
+       r = mfd_busy_add_seals(global_mfd, F_SEAL_WRITE);
+       if (r >= 0) {
+               printf("HURRAY! This kernel fixed GUP races!\n");
+       } else {
+               /* wait 1s more so the FUSE-request is done */
+               sleep(1);
+
+               /* try sealing the global file again */
+               mfd_assert_add_seals(global_mfd, F_SEAL_WRITE);
+       }
+
+       return 0;
+}
+
+static pid_t spawn_sealing_thread(void)
+{
+       uint8_t *stack;
+       pid_t pid;
+
+       stack = malloc(STACK_SIZE);
+       if (!stack) {
+               printf("malloc(STACK_SIZE) failed: %m\n");
+               abort();
+       }
+
+       pid = clone(sealing_thread_fn,
+                   stack + STACK_SIZE,
+                   SIGCHLD | CLONE_FILES | CLONE_FS | CLONE_VM,
+                   NULL);
+       if (pid < 0) {
+               printf("clone() failed: %m\n");
+               abort();
+       }
+
+       return pid;
+}
+
+static void join_sealing_thread(pid_t pid)
+{
+       waitpid(pid, NULL, 0);
+}
+
+int main(int argc, char **argv)
+{
+       static const char zero[MFD_DEF_SIZE];
+       int fd, mfd, r;
+       void *p;
+       int was_sealed;
+       pid_t pid;
+
+       if (argc < 2) {
+               printf("error: please pass path to file in fuse_mnt mount-point\n");
+               abort();
+       }
+
+       /* open FUSE memfd file for GUP testing */
+       printf("opening: %s\n", argv[1]);
+       fd = open(argv[1], O_RDONLY | O_CLOEXEC);
+       if (fd < 0) {
+               printf("cannot open(\"%s\"): %m\n", argv[1]);
+               abort();
+       }
+
+       /* create new memfd-object */
+       mfd = mfd_assert_new("kern_memfd_fuse",
+                            MFD_DEF_SIZE,
+                            MFD_CLOEXEC | MFD_ALLOW_SEALING);
+
+       /* mmap memfd-object for writing */
+       p = mfd_assert_mmap_shared(mfd);
+
+       /* pass mfd+mapping to a separate sealing-thread which tries to seal
+        * the memfd objects with SEAL_WRITE while we write into it */
+       global_mfd = mfd;
+       global_p = p;
+       pid = spawn_sealing_thread();
+
+       /* Use read() on the FUSE file to read into our memory-mapped memfd
+        * object. This races the other thread which tries to seal the
+        * memfd-object.
+        * If @fd is on the memfd-fake-FUSE-FS, the read() is delayed by 1s.
+        * This guarantees that the receive-buffer is pinned for 1s until the
+        * data is written into it. The racing ADD_SEALS should thus fail as
+        * the pages are still pinned. */
+       r = read(fd, p, MFD_DEF_SIZE);
+       if (r < 0) {
+               printf("read() failed: %m\n");
+               abort();
+       } else if (!r) {
+               printf("unexpected EOF on read()\n");
+               abort();
+       }
+
+       was_sealed = mfd_assert_get_seals(mfd) & F_SEAL_WRITE;
+
+       /* Wait for sealing-thread to finish and verify that it
+        * successfully sealed the file after the second try. */
+       join_sealing_thread(pid);
+       mfd_assert_has_seals(mfd, F_SEAL_WRITE);
+
+       /* *IF* the memfd-object was sealed at the time our read() returned,
+        * then the kernel did a page-replacement or canceled the read() (or
+        * whatever magic it did..). In that case, the memfd object is still
+        * all zero.
+        * In case the memfd-object was *not* sealed, the read() was successfull
+        * and the memfd object must *not* be all zero.
+        * Note that in real scenarios, there might be a mixture of both, but
+        * in this test-cases, we have explicit 200ms delays which should be
+        * enough to avoid any in-flight writes. */
+
+       p = mfd_assert_mmap_private(mfd);
+       if (was_sealed && memcmp(p, zero, MFD_DEF_SIZE)) {
+               printf("memfd sealed during read() but data not discarded\n");
+               abort();
+       } else if (!was_sealed && !memcmp(p, zero, MFD_DEF_SIZE)) {
+               printf("memfd sealed after read() but data discarded\n");
+               abort();
+       }
+
+       close(mfd);
+       close(fd);
+
+       printf("fuse: DONE\n");
+
+       return 0;
+}
diff --git a/tools/testing/selftests/memfd/run_fuse_test.sh b/tools/testing/selftests/memfd/run_fuse_test.sh
new file mode 100644 (file)
index 0000000..69b930e
--- /dev/null
@@ -0,0 +1,14 @@
+#!/bin/sh
+
+if test -d "./mnt" ; then
+       fusermount -u ./mnt
+       rmdir ./mnt
+fi
+
+set -e
+
+mkdir mnt
+./fuse_mnt ./mnt
+./fuse_test ./mnt/memfd
+fusermount -u ./mnt
+rmdir ./mnt