+++ /dev/null
-/**
- *
- * Synaptics Register Mapped Interface (RMI4) I2C Physical Layer Driver.
- * Copyright (c) 2007-2010, Synaptics Incorporated
- *
- * Author: Js HA <js.ha@stericsson.com> for ST-Ericsson
- * Author: Naveen Kumar G <naveen.gaddipati@stericsson.com> for ST-Ericsson
- * Copyright 2010 (c) ST-Ericsson AB
- */
-/*
- * This file is licensed under the GPL2 license.
- *
- *#############################################################################
- * GPL
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published
- * by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
- * for more details.
- *
- *#############################################################################
- */
-
-#include <linux/input.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/interrupt.h>
-#include <linux/regulator/consumer.h>
-#include <linux/module.h>
-#include <linux/input/mt.h>
-#include "synaptics_i2c_rmi4.h"
-
-/* TODO: for multiple device support will need a per-device mutex */
-#define DRIVER_NAME "synaptics_rmi4_i2c"
-
-#define MAX_ERROR_REPORT 6
-#define MAX_TOUCH_MAJOR 15
-#define MAX_RETRY_COUNT 5
-#define STD_QUERY_LEN 21
-#define PAGE_LEN 2
-#define DATA_BUF_LEN 32
-#define BUF_LEN 37
-#define QUERY_LEN 9
-#define DATA_LEN 12
-#define HAS_TAP 0x01
-#define HAS_PALMDETECT 0x01
-#define HAS_ROTATE 0x02
-#define HAS_TAPANDHOLD 0x02
-#define HAS_DOUBLETAP 0x04
-#define HAS_EARLYTAP 0x08
-#define HAS_RELEASE 0x08
-#define HAS_FLICK 0x10
-#define HAS_PRESS 0x20
-#define HAS_PINCH 0x40
-
-#define MASK_16BIT 0xFFFF
-#define MASK_8BIT 0xFF
-#define MASK_7BIT 0x7F
-#define MASK_5BIT 0x1F
-#define MASK_4BIT 0x0F
-#define MASK_3BIT 0x07
-#define MASK_2BIT 0x03
-#define TOUCHPAD_CTRL_INTR 0x8
-#define PDT_START_SCAN_LOCATION (0x00E9)
-#define PDT_END_SCAN_LOCATION (0x000A)
-#define PDT_ENTRY_SIZE (0x0006)
-#define SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM (0x11)
-#define SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM (0x01)
-
-/**
- * struct synaptics_rmi4_fn_desc - contains the function descriptor information
- * @query_base_addr: base address for query
- * @cmd_base_addr: base address for command
- * @ctrl_base_addr: base address for control
- * @data_base_addr: base address for data
- * @intr_src_count: count for the interrupt source
- * @fn_number: function number
- *
- * This structure is used to gives the function descriptor information
- * of the particular functionality.
- */
-struct synaptics_rmi4_fn_desc {
- unsigned char query_base_addr;
- unsigned char cmd_base_addr;
- unsigned char ctrl_base_addr;
- unsigned char data_base_addr;
- unsigned char intr_src_count;
- unsigned char fn_number;
-};
-
-/**
- * struct synaptics_rmi4_fn - contains the function information
- * @fn_number: function number
- * @num_of_data_sources: number of data sources
- * @num_of_data_points: number of fingers touched
- * @size_of_data_register_block: data register block size
- * @index_to_intr_reg: index for interrupt register
- * @intr_mask: interrupt mask value
- * @fn_desc: variable for function descriptor structure
- * @link: linked list for function descriptors
- *
- * This structure gives information about the number of data sources and
- * the number of data registers associated with the function.
- */
-struct synaptics_rmi4_fn {
- unsigned char fn_number;
- unsigned char num_of_data_sources;
- unsigned char num_of_data_points;
- unsigned char size_of_data_register_block;
- unsigned char index_to_intr_reg;
- unsigned char intr_mask;
- struct synaptics_rmi4_fn_desc fn_desc;
- struct list_head link;
-};
-
-/**
- * struct synaptics_rmi4_device_info - contains the rmi4 device information
- * @version_major: protocol major version number
- * @version_minor: protocol minor version number
- * @manufacturer_id: manufacturer identification byte
- * @product_props: product properties information
- * @product_info: product info array
- * @date_code: device manufacture date
- * @tester_id: tester id array
- * @serial_number: serial number for that device
- * @product_id_string: product id for the device
- * @support_fn_list: linked list for device information
- *
- * This structure gives information about the number of data sources and
- * the number of data registers associated with the function.
- */
-struct synaptics_rmi4_device_info {
- unsigned int version_major;
- unsigned int version_minor;
- unsigned char manufacturer_id;
- unsigned char product_props;
- unsigned char product_info[2];
- unsigned char date_code[3];
- unsigned short tester_id;
- unsigned short serial_number;
- unsigned char product_id_string[11];
- struct list_head support_fn_list;
-};
-
-/**
- * struct synaptics_rmi4_data - contains the rmi4 device data
- * @rmi4_mod_info: structure variable for rmi4 device info
- * @input_dev: pointer for input device
- * @i2c_client: pointer for i2c client
- * @board: constant pointer for touch platform data
- * @fn_list_mutex: mutex for function list
- * @rmi4_page_mutex: mutex for rmi4 page
- * @current_page: variable for integer
- * @number_of_interrupt_register: interrupt registers count
- * @fn01_ctrl_base_addr: control base address for fn01
- * @fn01_query_base_addr: query base address for fn01
- * @fn01_data_base_addr: data base address for fn01
- * @sensor_max_x: sensor maximum x value
- * @sensor_max_y: sensor maximum y value
- * @regulator: pointer to the regulator structure
- * @wait: wait queue structure variable
- * @touch_stopped: flag to stop the thread function
- * @fingers_supported: maximum supported fingers
- *
- * This structure gives the device data information.
- */
-struct synaptics_rmi4_data {
- struct synaptics_rmi4_device_info rmi4_mod_info;
- struct input_dev *input_dev;
- struct i2c_client *i2c_client;
- const struct synaptics_rmi4_platform_data *board;
- struct mutex fn_list_mutex;
- struct mutex rmi4_page_mutex;
- int current_page;
- unsigned int number_of_interrupt_register;
- unsigned short fn01_ctrl_base_addr;
- unsigned short fn01_query_base_addr;
- unsigned short fn01_data_base_addr;
- int sensor_max_x;
- int sensor_max_y;
- struct regulator *regulator;
- wait_queue_head_t wait;
- bool touch_stopped;
- unsigned char fingers_supported;
-};
-
-/**
- * synaptics_rmi4_set_page() - sets the page
- * @pdata: pointer to synaptics_rmi4_data structure
- * @address: set the address of the page
- *
- * This function is used to set the page and returns integer.
- */
-static int synaptics_rmi4_set_page(struct synaptics_rmi4_data *pdata,
- unsigned int address)
-{
- unsigned char txbuf[PAGE_LEN];
- int retval;
- unsigned int page;
- struct i2c_client *i2c = pdata->i2c_client;
-
- page = ((address >> 8) & MASK_8BIT);
- if (page != pdata->current_page) {
- txbuf[0] = MASK_8BIT;
- txbuf[1] = page;
- retval = i2c_master_send(i2c, txbuf, PAGE_LEN);
- if (retval != PAGE_LEN)
- dev_err(&i2c->dev, "failed:%d\n", retval);
- else
- pdata->current_page = page;
- } else
- retval = PAGE_LEN;
- return retval;
-}
-/**
- * synaptics_rmi4_i2c_block_read() - read the block of data
- * @pdata: pointer to synaptics_rmi4_data structure
- * @address: read the block of data from this offset
- * @valp: pointer to a buffer containing the data to be read
- * @size: number of bytes to read
- *
- * This function is to read the block of data and returns integer.
- */
-static int synaptics_rmi4_i2c_block_read(struct synaptics_rmi4_data *pdata,
- unsigned short address,
- unsigned char *valp, int size)
-{
- int retval = 0;
- int retry_count = 0;
- int index;
- struct i2c_client *i2c = pdata->i2c_client;
-
- mutex_lock(&(pdata->rmi4_page_mutex));
- retval = synaptics_rmi4_set_page(pdata, address);
- if (retval != PAGE_LEN)
- goto exit;
- index = address & MASK_8BIT;
-retry:
- retval = i2c_smbus_read_i2c_block_data(i2c, index, size, valp);
- if (retval != size) {
- if (++retry_count == MAX_RETRY_COUNT)
- dev_err(&i2c->dev,
- "%s:address 0x%04x size %d failed:%d\n",
- __func__, address, size, retval);
- else {
- synaptics_rmi4_set_page(pdata, address);
- goto retry;
- }
- }
-exit:
- mutex_unlock(&(pdata->rmi4_page_mutex));
- return retval;
-}
-
-/**
- * synaptics_rmi4_i2c_byte_write() - write the single byte data
- * @pdata: pointer to synaptics_rmi4_data structure
- * @address: write the block of data from this offset
- * @data: data to be write
- *
- * This function is to write the single byte data and returns integer.
- */
-static int synaptics_rmi4_i2c_byte_write(struct synaptics_rmi4_data *pdata,
- unsigned short address,
- unsigned char data)
-{
- unsigned char txbuf[2];
- int retval = 0;
- struct i2c_client *i2c = pdata->i2c_client;
-
- /* Can't have anyone else changing the page behind our backs */
- mutex_lock(&(pdata->rmi4_page_mutex));
-
- retval = synaptics_rmi4_set_page(pdata, address);
- if (retval != PAGE_LEN)
- goto exit;
- txbuf[0] = address & MASK_8BIT;
- txbuf[1] = data;
- retval = i2c_master_send(pdata->i2c_client, txbuf, 2);
- /* Add in retry on writes only in certain error return values */
- if (retval != 2) {
- dev_err(&i2c->dev, "failed:%d\n", retval);
- retval = -EIO;
- } else
- retval = 1;
-exit:
- mutex_unlock(&(pdata->rmi4_page_mutex));
- return retval;
-}
-
-/**
- * synpatics_rmi4_touchpad_report() - reports for the rmi4 touchpad device
- * @pdata: pointer to synaptics_rmi4_data structure
- * @rfi: pointer to synaptics_rmi4_fn structure
- *
- * This function calls to reports for the rmi4 touchpad device
- */
-static int synpatics_rmi4_touchpad_report(struct synaptics_rmi4_data *pdata,
- struct synaptics_rmi4_fn *rfi)
-{
- /* number of touch points - fingers down in this case */
- int touch_count = 0;
- int finger;
- int finger_registers;
- int reg;
- int finger_shift;
- int finger_status;
- int retval;
- int x, y;
- int wx, wy;
- unsigned short data_base_addr;
- unsigned short data_offset;
- unsigned char data_reg_blk_size;
- unsigned char values[2];
- unsigned char data[DATA_LEN];
- unsigned char fingers_supported = pdata->fingers_supported;
- struct i2c_client *client = pdata->i2c_client;
- struct input_dev *input_dev = pdata->input_dev;
-
- /* get 2D sensor finger data */
- /*
- * First get the finger status field - the size of the finger status
- * field is determined by the number of finger supporte - 2 bits per
- * finger, so the number of registers to read is:
- * registerCount = ceil(numberOfFingers/4).
- * Read the required number of registers and check each 2 bit field to
- * determine if a finger is down:
- * 00 = finger not present,
- * 01 = finger present and data accurate,
- * 10 = finger present but data may not be accurate,
- * 11 = reserved for product use.
- */
- finger_registers = (fingers_supported + 3) / 4;
- data_base_addr = rfi->fn_desc.data_base_addr;
- retval = synaptics_rmi4_i2c_block_read(pdata, data_base_addr, values,
- finger_registers);
- if (retval != finger_registers) {
- dev_err(&client->dev, "%s:read status registers failed\n",
- __func__);
- return 0;
- }
- /*
- * For each finger present, read the proper number of registers
- * to get absolute data.
- */
- data_reg_blk_size = rfi->size_of_data_register_block;
- for (finger = 0; finger < fingers_supported; finger++) {
- /* determine which data byte the finger status is in */
- reg = finger / 4;
- /* bit shift to get finger's status */
- finger_shift = (finger % 4) * 2;
- finger_status = (values[reg] >> finger_shift) & 3;
- /*
- * if finger status indicates a finger is present then
- * read the finger data and report it
- */
- input_mt_slot(input_dev, finger);
- input_mt_report_slot_state(input_dev, MT_TOOL_FINGER,
- finger_status != 0);
-
- if (finger_status) {
- /* Read the finger data */
- data_offset = data_base_addr +
- ((finger * data_reg_blk_size) +
- finger_registers);
- retval = synaptics_rmi4_i2c_block_read(pdata,
- data_offset, data,
- data_reg_blk_size);
- if (retval != data_reg_blk_size) {
- dev_err(&client->dev, "%s:read data failed\n",
- __func__);
- return 0;
- }
- x = (data[0] << 4) | (data[2] & MASK_4BIT);
- y = (data[1] << 4) | ((data[2] >> 4) & MASK_4BIT);
- wy = (data[3] >> 4) & MASK_4BIT;
- wx = (data[3] & MASK_4BIT);
-
- if (pdata->board->x_flip)
- x = pdata->sensor_max_x - x;
- if (pdata->board->y_flip)
- y = pdata->sensor_max_y - y;
-
- input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR,
- max(wx, wy));
- input_report_abs(input_dev, ABS_MT_POSITION_X, x);
- input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
-
- /* number of active touch points */
- touch_count++;
- }
- }
-
- /* sync after groups of events */
- input_mt_sync_frame(input_dev);
- input_sync(input_dev);
- /* return the number of touch points */
- return touch_count;
-}
-
-/**
- * synaptics_rmi4_report_device() - reports the rmi4 device
- * @pdata: pointer to synaptics_rmi4_data structure
- * @rfi: pointer to synaptics_rmi4_fn
- *
- * This function is used to call the report function of the rmi4 device.
- */
-static int synaptics_rmi4_report_device(struct synaptics_rmi4_data *pdata,
- struct synaptics_rmi4_fn *rfi)
-{
- int touch = 0;
- struct i2c_client *client = pdata->i2c_client;
- static int num_error_reports;
-
- if (rfi->fn_number != SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
- num_error_reports++;
- if (num_error_reports < MAX_ERROR_REPORT)
- dev_err(&client->dev, "%s:report not supported\n",
- __func__);
- } else
- touch = synpatics_rmi4_touchpad_report(pdata, rfi);
- return touch;
-}
-/**
- * synaptics_rmi4_sensor_report() - reports to input subsystem
- * @pdata: pointer to synaptics_rmi4_data structure
- *
- * This function is used to reads in all data sources and reports
- * them to the input subsystem.
- */
-static int synaptics_rmi4_sensor_report(struct synaptics_rmi4_data *pdata)
-{
- unsigned char intr_status[4];
- /* number of touch points - fingers or buttons */
- int touch = 0;
- unsigned int retval;
- struct synaptics_rmi4_fn *rfi;
- struct synaptics_rmi4_device_info *rmi;
- struct i2c_client *client = pdata->i2c_client;
-
- /*
- * Get the interrupt status from the function $01
- * control register+1 to find which source(s) were interrupting
- * so we can read the data from the source(s) (2D sensor, buttons..)
- */
- retval = synaptics_rmi4_i2c_block_read(pdata,
- pdata->fn01_data_base_addr + 1,
- intr_status,
- pdata->number_of_interrupt_register);
- if (retval != pdata->number_of_interrupt_register) {
- dev_err(&client->dev,
- "could not read interrupt status registers\n");
- return 0;
- }
- /*
- * check each function that has data sources and if the interrupt for
- * that triggered then call that RMI4 functions report() function to
- * gather data and report it to the input subsystem
- */
- rmi = &(pdata->rmi4_mod_info);
- list_for_each_entry(rfi, &rmi->support_fn_list, link) {
- if (rfi->num_of_data_sources) {
- if (intr_status[rfi->index_to_intr_reg] &
- rfi->intr_mask)
- touch = synaptics_rmi4_report_device(pdata,
- rfi);
- }
- }
- /* return the number of touch points */
- return touch;
-}
-
-/**
- * synaptics_rmi4_irq() - thread function for rmi4 attention line
- * @irq: irq value
- * @data: void pointer
- *
- * This function is interrupt thread function. It just notifies the
- * application layer that attention is required.
- */
-static irqreturn_t synaptics_rmi4_irq(int irq, void *data)
-{
- struct synaptics_rmi4_data *pdata = data;
- int touch_count;
-
- do {
- touch_count = synaptics_rmi4_sensor_report(pdata);
- if (touch_count)
- wait_event_timeout(pdata->wait, pdata->touch_stopped,
- msecs_to_jiffies(1));
- else
- break;
- } while (!pdata->touch_stopped);
- return IRQ_HANDLED;
-}
-
-/**
- * synpatics_rmi4_touchpad_detect() - detects the rmi4 touchpad device
- * @pdata: pointer to synaptics_rmi4_data structure
- * @rfi: pointer to synaptics_rmi4_fn structure
- * @fd: pointer to synaptics_rmi4_fn_desc structure
- * @interruptcount: count the number of interrupts
- *
- * This function calls to detects the rmi4 touchpad device
- */
-static int synpatics_rmi4_touchpad_detect(struct synaptics_rmi4_data *pdata,
- struct synaptics_rmi4_fn *rfi,
- struct synaptics_rmi4_fn_desc *fd,
- unsigned int interruptcount)
-{
- unsigned char queries[QUERY_LEN];
- unsigned short intr_offset;
- unsigned char abs_data_size;
- unsigned char abs_data_blk_size;
- unsigned char egr_0, egr_1;
- unsigned int all_data_blk_size;
- int has_pinch, has_flick, has_tap;
- int has_tapandhold, has_doubletap;
- int has_earlytap, has_press;
- int has_palmdetect, has_rotate;
- int has_rel;
- int i;
- int retval;
- struct i2c_client *client = pdata->i2c_client;
-
- rfi->fn_desc.query_base_addr = fd->query_base_addr;
- rfi->fn_desc.data_base_addr = fd->data_base_addr;
- rfi->fn_desc.intr_src_count = fd->intr_src_count;
- rfi->fn_desc.fn_number = fd->fn_number;
- rfi->fn_number = fd->fn_number;
- rfi->num_of_data_sources = fd->intr_src_count;
- rfi->fn_desc.ctrl_base_addr = fd->ctrl_base_addr;
- rfi->fn_desc.cmd_base_addr = fd->cmd_base_addr;
-
- /*
- * need to get number of fingers supported, data size, etc.
- * to be used when getting data since the number of registers to
- * read depends on the number of fingers supported and data size.
- */
- retval = synaptics_rmi4_i2c_block_read(pdata, fd->query_base_addr,
- queries,
- sizeof(queries));
- if (retval != sizeof(queries)) {
- dev_err(&client->dev, "%s:read function query registers\n",
- __func__);
- return retval;
- }
- /*
- * 2D data sources have only 3 bits for the number of fingers
- * supported - so the encoding is a bit weird.
- */
- if ((queries[1] & MASK_3BIT) <= 4)
- /* add 1 since zero based */
- rfi->num_of_data_points = (queries[1] & MASK_3BIT) + 1;
- else {
- /*
- * a value of 5 is up to 10 fingers - 6 and 7 are reserved
- * (shouldn't get these i int retval;n a normal 2D source).
- */
- if ((queries[1] & MASK_3BIT) == 5)
- rfi->num_of_data_points = 10;
- }
- pdata->fingers_supported = rfi->num_of_data_points;
- /* Need to get interrupt info for handling interrupts */
- rfi->index_to_intr_reg = (interruptcount + 7) / 8;
- if (rfi->index_to_intr_reg != 0)
- rfi->index_to_intr_reg -= 1;
- /*
- * loop through interrupts for each source in fn $11
- * and or in a bit to the interrupt mask for each.
- */
- intr_offset = interruptcount % 8;
- rfi->intr_mask = 0;
- for (i = intr_offset;
- i < ((fd->intr_src_count & MASK_3BIT) + intr_offset); i++)
- rfi->intr_mask |= 1 << i;
-
- /* Size of just the absolute data for one finger */
- abs_data_size = queries[5] & MASK_2BIT;
- /* One each for X and Y, one for LSB for X & Y, one for W, one for Z */
- abs_data_blk_size = 3 + (2 * (abs_data_size == 0 ? 1 : 0));
- rfi->size_of_data_register_block = abs_data_blk_size;
-
- /*
- * need to determine the size of data to read - this depends on
- * conditions such as whether Relative data is reported and if Gesture
- * data is reported.
- */
- egr_0 = queries[7];
- egr_1 = queries[8];
-
- /*
- * Get info about what EGR data is supported, whether it has
- * Relative data supported, etc.
- */
- has_pinch = egr_0 & HAS_PINCH;
- has_flick = egr_0 & HAS_FLICK;
- has_tap = egr_0 & HAS_TAP;
- has_earlytap = egr_0 & HAS_EARLYTAP;
- has_press = egr_0 & HAS_PRESS;
- has_rotate = egr_1 & HAS_ROTATE;
- has_rel = queries[1] & HAS_RELEASE;
- has_tapandhold = egr_0 & HAS_TAPANDHOLD;
- has_doubletap = egr_0 & HAS_DOUBLETAP;
- has_palmdetect = egr_1 & HAS_PALMDETECT;
-
- /*
- * Size of all data including finger status, absolute data for each
- * finger, relative data and EGR data
- */
- all_data_blk_size =
- /* finger status, four fingers per register */
- ((rfi->num_of_data_points + 3) / 4) +
- /* absolute data, per finger times number of fingers */
- (abs_data_blk_size * rfi->num_of_data_points) +
- /*
- * two relative registers (if relative is being reported)
- */
- 2 * has_rel +
- /*
- * F11_2D_data8 is only present if the egr_0
- * register is non-zero.
- */
- !!(egr_0) +
- /*
- * F11_2D_data9 is only present if either egr_0 or
- * egr_1 registers are non-zero.
- */
- (egr_0 || egr_1) +
- /*
- * F11_2D_data10 is only present if EGR_PINCH or EGR_FLICK of
- * egr_0 reports as 1.
- */
- !!(has_pinch | has_flick) +
- /*
- * F11_2D_data11 and F11_2D_data12 are only present if
- * EGR_FLICK of egr_0 reports as 1.
- */
- 2 * !!(has_flick);
- return retval;
-}
-
-/**
- * synaptics_rmi4_touchpad_config() - configures the rmi4 touchpad device
- * @pdata: pointer to synaptics_rmi4_data structure
- * @rfi: pointer to synaptics_rmi4_fn structure
- *
- * This function calls to configures the rmi4 touchpad device
- */
-static int synaptics_rmi4_touchpad_config(struct synaptics_rmi4_data *pdata,
- struct synaptics_rmi4_fn *rfi)
-{
- /*
- * For the data source - print info and do any
- * source specific configuration.
- */
- unsigned char data[BUF_LEN];
- int retval = 0;
- struct i2c_client *client = pdata->i2c_client;
-
- /* Get and print some info about the data source... */
- /* To Query 2D devices we need to read from the address obtained
- * from the function descriptor stored in the RMI function info.
- */
- retval = synaptics_rmi4_i2c_block_read(pdata,
- rfi->fn_desc.query_base_addr,
- data, QUERY_LEN);
- if (retval != QUERY_LEN)
- dev_err(&client->dev, "%s:read query registers failed\n",
- __func__);
- else {
- retval = synaptics_rmi4_i2c_block_read(pdata,
- rfi->fn_desc.ctrl_base_addr,
- data, DATA_BUF_LEN);
- if (retval != DATA_BUF_LEN) {
- dev_err(&client->dev,
- "%s:read control registers failed\n",
- __func__);
- return retval;
- }
- /* Store these for use later*/
- pdata->sensor_max_x = ((data[6] & MASK_8BIT) << 0) |
- ((data[7] & MASK_4BIT) << 8);
- pdata->sensor_max_y = ((data[8] & MASK_5BIT) << 0) |
- ((data[9] & MASK_4BIT) << 8);
- }
- return retval;
-}
-
-/**
- * synaptics_rmi4_i2c_query_device() - query the rmi4 device
- * @pdata: pointer to synaptics_rmi4_data structure
- *
- * This function is used to query the rmi4 device.
- */
-static int synaptics_rmi4_i2c_query_device(struct synaptics_rmi4_data *pdata)
-{
- int i;
- int retval;
- unsigned char std_queries[STD_QUERY_LEN];
- unsigned char intr_count = 0;
- int data_sources = 0;
- unsigned int ctrl_offset;
- struct synaptics_rmi4_fn *rfi;
- struct synaptics_rmi4_fn_desc rmi_fd;
- struct synaptics_rmi4_device_info *rmi;
- struct i2c_client *client = pdata->i2c_client;
-
- /*
- * init the physical drivers RMI module
- * info list of functions
- */
- INIT_LIST_HEAD(&pdata->rmi4_mod_info.support_fn_list);
-
- /*
- * Read the Page Descriptor Table to determine what functions
- * are present
- */
- for (i = PDT_START_SCAN_LOCATION; i > PDT_END_SCAN_LOCATION;
- i -= PDT_ENTRY_SIZE) {
- retval = synaptics_rmi4_i2c_block_read(pdata, i,
- (unsigned char *)&rmi_fd,
- sizeof(rmi_fd));
- if (retval != sizeof(rmi_fd)) {
- /* failed to read next PDT entry */
- dev_err(&client->dev, "%s: read error\n", __func__);
- return -EIO;
- }
- rfi = NULL;
- if (rmi_fd.fn_number) {
- switch (rmi_fd.fn_number & MASK_8BIT) {
- case SYNAPTICS_RMI4_DEVICE_CONTROL_FUNC_NUM:
- pdata->fn01_query_base_addr =
- rmi_fd.query_base_addr;
- pdata->fn01_ctrl_base_addr =
- rmi_fd.ctrl_base_addr;
- pdata->fn01_data_base_addr =
- rmi_fd.data_base_addr;
- break;
- case SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM:
- if (rmi_fd.intr_src_count) {
- rfi = kmalloc(sizeof(*rfi),
- GFP_KERNEL);
- if (!rfi)
- return -ENOMEM;
- retval = synpatics_rmi4_touchpad_detect
- (pdata, rfi,
- &rmi_fd,
- intr_count);
- if (retval < 0) {
- kfree(rfi);
- return retval;
- }
- }
- break;
- }
- /* interrupt count for next iteration */
- intr_count += (rmi_fd.intr_src_count & MASK_3BIT);
- /*
- * We only want to add functions to the list
- * that have data associated with them.
- */
- if (rfi && rmi_fd.intr_src_count) {
- /* link this function info to the RMI module */
- mutex_lock(&(pdata->fn_list_mutex));
- list_add_tail(&rfi->link,
- &pdata->rmi4_mod_info.support_fn_list);
- mutex_unlock(&(pdata->fn_list_mutex));
- }
- } else {
- /*
- * A zero in the function number
- * signals the end of the PDT
- */
- dev_dbg(&client->dev,
- "%s:end of PDT\n", __func__);
- break;
- }
- }
- /*
- * calculate the interrupt register count - used in the
- * ISR to read the correct number of interrupt registers
- */
- pdata->number_of_interrupt_register = (intr_count + 7) / 8;
- /*
- * Function $01 will be used to query the product properties,
- * and product ID so we had to read the PDT above first to get
- * the Fn $01 query address and prior to filling in the product
- * info. NOTE: Even an unflashed device will still have FN $01.
- */
-
- /* Load up the standard queries and get the RMI4 module info */
- retval = synaptics_rmi4_i2c_block_read(pdata,
- pdata->fn01_query_base_addr,
- std_queries,
- sizeof(std_queries));
- if (retval != sizeof(std_queries)) {
- dev_err(&client->dev, "%s:Failed reading queries\n",
- __func__);
- return -EIO;
- }
-
- /* Currently supported RMI version is 4.0 */
- pdata->rmi4_mod_info.version_major = 4;
- pdata->rmi4_mod_info.version_minor = 0;
- /*
- * get manufacturer id, product_props, product info,
- * date code, tester id, serial num and product id (name)
- */
- pdata->rmi4_mod_info.manufacturer_id = std_queries[0];
- pdata->rmi4_mod_info.product_props = std_queries[1];
- pdata->rmi4_mod_info.product_info[0] = std_queries[2];
- pdata->rmi4_mod_info.product_info[1] = std_queries[3];
- /* year - 2001-2032 */
- pdata->rmi4_mod_info.date_code[0] = std_queries[4] & MASK_5BIT;
- /* month - 1-12 */
- pdata->rmi4_mod_info.date_code[1] = std_queries[5] & MASK_4BIT;
- /* day - 1-31 */
- pdata->rmi4_mod_info.date_code[2] = std_queries[6] & MASK_5BIT;
- pdata->rmi4_mod_info.tester_id = ((std_queries[7] & MASK_7BIT) << 8) |
- (std_queries[8] & MASK_7BIT);
- pdata->rmi4_mod_info.serial_number =
- ((std_queries[9] & MASK_7BIT) << 8) |
- (std_queries[10] & MASK_7BIT);
- memcpy(pdata->rmi4_mod_info.product_id_string, &std_queries[11], 10);
-
- /* Check if this is a Synaptics device - report if not. */
- if (pdata->rmi4_mod_info.manufacturer_id != 1)
- dev_err(&client->dev, "non-Synaptics mfg id:%d\n",
- pdata->rmi4_mod_info.manufacturer_id);
-
- list_for_each_entry(rfi, &pdata->rmi4_mod_info.support_fn_list, link)
- data_sources += rfi->num_of_data_sources;
- if (data_sources) {
- rmi = &(pdata->rmi4_mod_info);
- list_for_each_entry(rfi, &rmi->support_fn_list, link) {
- if (rfi->num_of_data_sources) {
- if (rfi->fn_number ==
- SYNAPTICS_RMI4_TOUCHPAD_FUNC_NUM) {
- retval = synaptics_rmi4_touchpad_config
- (pdata, rfi);
- if (retval < 0)
- return retval;
- } else
- dev_err(&client->dev,
- "%s:fn_number not supported\n",
- __func__);
- /*
- * Turn on interrupts for this
- * function's data sources.
- */
- ctrl_offset = pdata->fn01_ctrl_base_addr + 1 +
- rfi->index_to_intr_reg;
- retval = synaptics_rmi4_i2c_byte_write(pdata,
- ctrl_offset,
- rfi->intr_mask);
- if (retval < 0)
- return retval;
- }
- }
- }
- return 0;
-}
-
-/*
- * Descriptor structure.
- * Describes the number of i2c devices on the bus that speak RMI.
- */
-static const struct synaptics_rmi4_platform_data synaptics_rmi4_platformdata = {
- .irq_type = (IRQF_TRIGGER_FALLING | IRQF_SHARED),
- .x_flip = false,
- .y_flip = true,
-};
-
-/**
- * synaptics_rmi4_probe() - Initialze the i2c-client touchscreen driver
- * @i2c: i2c client structure pointer
- * @id:i2c device id pointer
- *
- * This function will allocate and initialize the instance
- * data and request the irq and set the instance data as the clients
- * platform data then register the physical driver which will do a scan of
- * the rmi4 Physical Device Table and enumerate any rmi4 functions that
- * have data sources associated with them.
- */
-static int synaptics_rmi4_probe
- (struct i2c_client *client, const struct i2c_device_id *dev_id)
-{
- int retval;
- unsigned char intr_status[4];
- struct synaptics_rmi4_data *rmi4_data;
- const struct synaptics_rmi4_platform_data *platformdata =
- client->dev.platform_data;
-
- if (!i2c_check_functionality(client->adapter,
- I2C_FUNC_SMBUS_BYTE_DATA)) {
- dev_err(&client->dev, "i2c smbus byte data not supported\n");
- return -EIO;
- }
-
- if (!platformdata)
- platformdata = &synaptics_rmi4_platformdata;
-
- /* Allocate and initialize the instance data for this client */
- rmi4_data = kcalloc(2, sizeof(struct synaptics_rmi4_data),
- GFP_KERNEL);
- if (!rmi4_data)
- return -ENOMEM;
-
- rmi4_data->input_dev = input_allocate_device();
- if (!rmi4_data->input_dev) {
- retval = -ENOMEM;
- goto err_input;
- }
-
- rmi4_data->regulator = regulator_get(&client->dev, "vdd");
- if (IS_ERR(rmi4_data->regulator)) {
- dev_err(&client->dev, "%s:get regulator failed\n",
- __func__);
- retval = PTR_ERR(rmi4_data->regulator);
- goto err_get_regulator;
- }
- retval = regulator_enable(rmi4_data->regulator);
- if (retval < 0) {
- dev_err(&client->dev, "%s:regulator enable failed\n",
- __func__);
- goto err_regulator_enable;
- }
- init_waitqueue_head(&rmi4_data->wait);
- /*
- * Copy i2c_client pointer into RTID's i2c_client pointer for
- * later use in rmi4_read, rmi4_write, etc.
- */
- rmi4_data->i2c_client = client;
- /* So we set the page correctly the first time */
- rmi4_data->current_page = MASK_16BIT;
- rmi4_data->board = platformdata;
- rmi4_data->touch_stopped = false;
-
- /* init the mutexes for maintain the lists */
- mutex_init(&(rmi4_data->fn_list_mutex));
- mutex_init(&(rmi4_data->rmi4_page_mutex));
-
- /*
- * Register physical driver - this will call the detect function that
- * will then scan the device and determine the supported
- * rmi4 functions.
- */
- retval = synaptics_rmi4_i2c_query_device(rmi4_data);
- if (retval) {
- dev_err(&client->dev, "%s: rmi4 query device failed\n",
- __func__);
- goto err_query_dev;
- }
-
- /* Store the instance data in the i2c_client */
- i2c_set_clientdata(client, rmi4_data);
-
- /*initialize the input device parameters */
- rmi4_data->input_dev->name = DRIVER_NAME;
- rmi4_data->input_dev->phys = "Synaptics_Clearpad";
- rmi4_data->input_dev->id.bustype = BUS_I2C;
- rmi4_data->input_dev->dev.parent = &client->dev;
- input_set_drvdata(rmi4_data->input_dev, rmi4_data);
-
- /* Initialize the function handlers for rmi4 */
- set_bit(EV_SYN, rmi4_data->input_dev->evbit);
- set_bit(EV_KEY, rmi4_data->input_dev->evbit);
- set_bit(EV_ABS, rmi4_data->input_dev->evbit);
-
- input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_X, 0,
- rmi4_data->sensor_max_x, 0, 0);
- input_set_abs_params(rmi4_data->input_dev, ABS_MT_POSITION_Y, 0,
- rmi4_data->sensor_max_y, 0, 0);
- input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
- MAX_TOUCH_MAJOR, 0, 0);
- input_mt_init_slots(rmi4_data->input_dev,
- rmi4_data->fingers_supported, 0);
-
- /* Clear interrupts */
- synaptics_rmi4_i2c_block_read(rmi4_data,
- rmi4_data->fn01_data_base_addr + 1, intr_status,
- rmi4_data->number_of_interrupt_register);
- retval = request_threaded_irq(client->irq, NULL,
- synaptics_rmi4_irq,
- platformdata->irq_type,
- DRIVER_NAME, rmi4_data);
- if (retval) {
- dev_err(&client->dev, "Unable to get attn irq %d\n",
- client->irq);
- goto err_query_dev;
- }
-
- retval = input_register_device(rmi4_data->input_dev);
- if (retval) {
- dev_err(&client->dev, "%s:input register failed\n", __func__);
- goto err_free_irq;
- }
-
- return retval;
-
-err_free_irq:
- free_irq(client->irq, rmi4_data);
-err_query_dev:
- regulator_disable(rmi4_data->regulator);
-err_regulator_enable:
- regulator_put(rmi4_data->regulator);
-err_get_regulator:
- input_free_device(rmi4_data->input_dev);
- rmi4_data->input_dev = NULL;
-err_input:
- kfree(rmi4_data);
-
- return retval;
-}
-/**
- * synaptics_rmi4_remove() - Removes the i2c-client touchscreen driver
- * @client: i2c client structure pointer
- *
- * This function uses to remove the i2c-client
- * touchscreen driver and returns integer.
- */
-static int synaptics_rmi4_remove(struct i2c_client *client)
-{
- struct synaptics_rmi4_data *rmi4_data = i2c_get_clientdata(client);
-
- rmi4_data->touch_stopped = true;
- wake_up(&rmi4_data->wait);
- free_irq(client->irq, rmi4_data);
- input_unregister_device(rmi4_data->input_dev);
- regulator_disable(rmi4_data->regulator);
- regulator_put(rmi4_data->regulator);
- kfree(rmi4_data);
-
- return 0;
-}
-
-/**
- * synaptics_rmi4_suspend() - suspend the touch screen controller
- * @dev: pointer to device structure
- *
- * This function is used to suspend the
- * touch panel controller and returns integer
- */
-static int __maybe_unused synaptics_rmi4_suspend(struct device *dev)
-{
- /* Touch sleep mode */
- int retval;
- unsigned char intr_status;
- struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
-
- rmi4_data->touch_stopped = true;
- disable_irq(rmi4_data->i2c_client->irq);
-
- retval = synaptics_rmi4_i2c_block_read(rmi4_data,
- rmi4_data->fn01_data_base_addr + 1,
- &intr_status,
- rmi4_data->number_of_interrupt_register);
- if (retval < 0)
- return retval;
-
- retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
- rmi4_data->fn01_ctrl_base_addr + 1,
- (intr_status & ~TOUCHPAD_CTRL_INTR));
- if (retval < 0)
- return retval;
-
- regulator_disable(rmi4_data->regulator);
-
- return 0;
-}
-/**
- * synaptics_rmi4_resume() - resume the touch screen controller
- * @dev: pointer to device structure
- *
- * This function is used to resume the touch panel
- * controller and returns integer.
- */
-static int __maybe_unused synaptics_rmi4_resume(struct device *dev)
-{
- int retval;
- unsigned char intr_status;
- struct synaptics_rmi4_data *rmi4_data = dev_get_drvdata(dev);
-
- retval = regulator_enable(rmi4_data->regulator);
- if (retval) {
- dev_err(dev, "Regulator enable failed (%d)\n", retval);
- return retval;
- }
-
- enable_irq(rmi4_data->i2c_client->irq);
- rmi4_data->touch_stopped = false;
-
- retval = synaptics_rmi4_i2c_block_read(rmi4_data,
- rmi4_data->fn01_data_base_addr + 1,
- &intr_status,
- rmi4_data->number_of_interrupt_register);
- if (retval < 0)
- return retval;
-
- retval = synaptics_rmi4_i2c_byte_write(rmi4_data,
- rmi4_data->fn01_ctrl_base_addr + 1,
- (intr_status | TOUCHPAD_CTRL_INTR));
- if (retval < 0)
- return retval;
-
- return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(synaptics_rmi4_dev_pm_ops, synaptics_rmi4_suspend,
- synaptics_rmi4_resume);
-
-static const struct i2c_device_id synaptics_rmi4_id_table[] = {
- { DRIVER_NAME, 0 },
- { },
-};
-MODULE_DEVICE_TABLE(i2c, synaptics_rmi4_id_table);
-
-static struct i2c_driver synaptics_rmi4_driver = {
- .driver = {
- .name = DRIVER_NAME,
- .pm = &synaptics_rmi4_dev_pm_ops,
- },
- .probe = synaptics_rmi4_probe,
- .remove = synaptics_rmi4_remove,
- .id_table = synaptics_rmi4_id_table,
-};
-
-module_i2c_driver(synaptics_rmi4_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("naveen.gaddipati@stericsson.com, js.ha@stericsson.com");
-MODULE_DESCRIPTION("synaptics rmi4 i2c touch Driver");
projects / cascardo / linux.git / commitdiff