#include <linux/spi/libertas_spi.h>
#include <linux/power_supply.h>
#include <linux/apm-emulation.h>
-#include <linux/delay.h>
#include <media/soc_camera.h>
};
static struct pxa2xx_spi_chip em_x270_tdo24m_chip = {
- .rx_threshold = 1,
- .tx_threshold = 1,
+ .rx_threshold = 1,
+ .tx_threshold = 1,
+ .gpio_cs = -1,
};
static struct tdo24m_platform_data em_x270_tdo24m_pdata = {
extern void __init pxa_init_irq(int irq_nr,
int (*set_wake)(unsigned int, unsigned int));
extern void __init pxa25x_init_irq(void);
+#ifdef CONFIG_CPU_PXA26x
+extern void __init pxa26x_init_irq(void);
+#endif
extern void __init pxa27x_init_irq(void);
extern void __init pxa3xx_init_irq(void);
extern void __init pxa_map_io(void);
#if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE)
extern void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin);
#else
-static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *, int, int) {}
+static inline void colibri_pxa3xx_init_mmc(mfp_cfg_t *pins, int len, int detect_pin) {}
#endif
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
extern void colibri_pxa3xx_init_lcd(int bl_pin);
#else
-static inline void colibri_pxa3xx_init_lcd(int) {}
+static inline void colibri_pxa3xx_init_lcd(int bl_pin) {}
#endif
#if defined(CONFIG_AX88796)
/* USB */
#define GPIO_NR_PALMT5_USB_DETECT_N 15
-#define GPIO_NR_PALMT5_USB_POWER 95
#define GPIO_NR_PALMT5_USB_PULLUP 93
/* LCD/BACKLIGHT */
/* USB */
#define GPIO_NR_PALMTX_USB_DETECT_N 13
-#define GPIO_NR_PALMTX_USB_POWER 95
#define GPIO_NR_PALMTX_USB_PULLUP 93
/* LCD/BACKLIGHT */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO15_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* MATRIX KEYPAD */
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
static struct pxa2xx_udc_mach_info palmt5_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMT5_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMT5_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMT5_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
/* setup udc GPIOs initial state */
static void __init palmt5_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMT5_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMT5_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMT5_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMT5_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMT5_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMT5_USB_PULLUP);
}
}
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO40_GPIO, /* ir disable */
/* USB */
GPIO13_GPIO, /* usb detect */
- GPIO95_GPIO, /* usb power */
+ GPIO93_GPIO, /* usb power */
/* PCMCIA */
GPIO48_nPOE,
static struct pxa2xx_udc_mach_info palmtx_udc_info __initdata = {
.gpio_vbus = GPIO_NR_PALMTX_USB_DETECT_N,
.gpio_vbus_inverted = 1,
- .gpio_pullup = GPIO_NR_PALMTX_USB_POWER,
+ .gpio_pullup = GPIO_NR_PALMTX_USB_PULLUP,
.gpio_pullup_inverted = 0,
};
/* setup udc GPIOs initial state */
static void __init palmtx_udc_init(void)
{
- if (!gpio_request(GPIO_NR_PALMTX_USB_POWER, "UDC Vbus")) {
- gpio_direction_output(GPIO_NR_PALMTX_USB_POWER, 1);
- gpio_free(GPIO_NR_PALMTX_USB_POWER);
+ if (!gpio_request(GPIO_NR_PALMTX_USB_PULLUP, "UDC Vbus")) {
+ gpio_direction_output(GPIO_NR_PALMTX_USB_PULLUP, 1);
+ gpio_free(GPIO_NR_PALMTX_USB_PULLUP);
}
}
struct chip_data *chip = drv_data->cur_chip;
if (chip->cs_control) {
- chip->cs_control(PXA2XX_CS_ASSERT);
+ chip->cs_control(PXA2XX_CS_DEASSERT);
return;
}