--- /dev/null
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
--- /dev/null
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
projects / cascardo / linux.git / commitdiff