mtd: bcm47xxsflash: define opcodes
authorRafał Miłecki <zajec5@gmail.com>
Wed, 6 Mar 2013 11:01:35 +0000 (12:01 +0100)
committerDavid Woodhouse <David.Woodhouse@intel.com>
Fri, 5 Apr 2013 12:14:17 +0000 (13:14 +0100)
We need them to add erase/write support. This may duplicate some defines
with bcma and/or ssb code, but it makes more sense to keep that in
bcm47xxsflash which is supposed to work with both buses.
Duplicated defines will be removed from ssb/bcma.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
drivers/mtd/devices/bcm47xxsflash.h

index 4498529..f22f8c4 100644 (file)
@@ -3,6 +3,54 @@
 
 #include <linux/mtd/mtd.h>
 
+/* Used for ST flashes only. */
+#define OPCODE_ST_WREN         0x0006          /* Write Enable */
+#define OPCODE_ST_WRDIS                0x0004          /* Write Disable */
+#define OPCODE_ST_RDSR         0x0105          /* Read Status Register */
+#define OPCODE_ST_WRSR         0x0101          /* Write Status Register */
+#define OPCODE_ST_READ         0x0303          /* Read Data Bytes */
+#define OPCODE_ST_PP           0x0302          /* Page Program */
+#define OPCODE_ST_SE           0x02d8          /* Sector Erase */
+#define OPCODE_ST_BE           0x00c7          /* Bulk Erase */
+#define OPCODE_ST_DP           0x00b9          /* Deep Power-down */
+#define OPCODE_ST_RES          0x03ab          /* Read Electronic Signature */
+#define OPCODE_ST_CSA          0x1000          /* Keep chip select asserted */
+#define OPCODE_ST_SSE          0x0220          /* Sub-sector Erase */
+
+/* Used for Atmel flashes only. */
+#define OPCODE_AT_READ                         0x07e8
+#define OPCODE_AT_PAGE_READ                    0x07d2
+#define OPCODE_AT_STATUS                       0x01d7
+#define OPCODE_AT_BUF1_WRITE                   0x0384
+#define OPCODE_AT_BUF2_WRITE                   0x0387
+#define OPCODE_AT_BUF1_ERASE_PROGRAM           0x0283
+#define OPCODE_AT_BUF2_ERASE_PROGRAM           0x0286
+#define OPCODE_AT_BUF1_PROGRAM                 0x0288
+#define OPCODE_AT_BUF2_PROGRAM                 0x0289
+#define OPCODE_AT_PAGE_ERASE                   0x0281
+#define OPCODE_AT_BLOCK_ERASE                  0x0250
+#define OPCODE_AT_BUF1_WRITE_ERASE_PROGRAM     0x0382
+#define OPCODE_AT_BUF2_WRITE_ERASE_PROGRAM     0x0385
+#define OPCODE_AT_BUF1_LOAD                    0x0253
+#define OPCODE_AT_BUF2_LOAD                    0x0255
+#define OPCODE_AT_BUF1_COMPARE                 0x0260
+#define OPCODE_AT_BUF2_COMPARE                 0x0261
+#define OPCODE_AT_BUF1_REPROGRAM               0x0258
+#define OPCODE_AT_BUF2_REPROGRAM               0x0259
+
+/* Status register bits for ST flashes */
+#define SR_ST_WIP              0x01            /* Write In Progress */
+#define SR_ST_WEL              0x02            /* Write Enable Latch */
+#define SR_ST_BP_MASK          0x1c            /* Block Protect */
+#define SR_ST_BP_SHIFT         2
+#define SR_ST_SRWD             0x80            /* Status Register Write Disable */
+
+/* Status register bits for Atmel flashes */
+#define SR_AT_READY            0x80
+#define SR_AT_MISMATCH         0x40
+#define SR_AT_ID_MASK          0x38
+#define SR_AT_ID_SHIFT         3
+
 struct bcma_drv_cc;
 
 enum bcm47xxsflash_type {