iwlagn-objs += iwl-1000.o
iwlagn-objs += iwl-2000.o
iwlagn-objs += iwl-pci.o
-iwlagn-objs += iwl-trans.o
+iwlagn-objs += iwl-trans.o iwl-trans-rx-pcie.o
iwlagn-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
iwlagn-$(CONFIG_IWLWIFI_DEVICE_TRACING) += iwl-devtrace.o
/* the rest are 0 by default */
};
-int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
-{
- u32 rb_size;
- const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
- u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
-
- rb_timeout = RX_RB_TIMEOUT;
-
- if (iwlagn_mod_params.amsdu_size_8K)
- rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
- else
- rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
-
- /* Stop Rx DMA */
- iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
-
- /* Reset driver's Rx queue write index */
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
-
- /* Tell device where to find RBD circular buffer in DRAM */
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
- (u32)(rxq->bd_dma >> 8));
-
- /* Tell device where in DRAM to update its Rx status */
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
- rxq->rb_stts_dma >> 4);
-
- /* Enable Rx DMA
- * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
- * the credit mechanism in 5000 HW RX FIFO
- * Direct rx interrupts to hosts
- * Rx buffer size 4 or 8k
- * RB timeout 0x10
- * 256 RBDs
- */
- iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
- FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
- FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
- FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
- FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
- rb_size|
- (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
- (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
-
- /* Set interrupt coalescing timer to default (2048 usecs) */
- iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
-
- return 0;
-}
-
static void iwlagn_set_pwr_vmain(struct iwl_priv *priv)
{
/*
~APMG_PS_CTRL_MSK_PWR_SRC);
}
+/*TODO: this function should move to transport layer */
int iwlagn_hw_nic_init(struct iwl_priv *priv)
{
unsigned long flags;
- struct iwl_rx_queue *rxq = &priv->rxq;
/* nic_init */
spin_lock_irqsave(&priv->lock, flags);
/* Allocate the RX queue, or reset if it is already allocated */
trans_rx_init(priv);
- iwlagn_rx_replenish(priv);
-
- iwlagn_rx_init(priv, rxq);
-
- spin_lock_irqsave(&priv->lock, flags);
-
- rxq->need_update = 1;
- iwl_rx_queue_update_write_ptr(priv, rxq);
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
/* Allocate or reset and init all Tx and Command queues */
if (trans_tx_init(priv))
return -ENOMEM;
return 0;
}
-/**
- * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
- */
-static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
- dma_addr_t dma_addr)
-{
- return cpu_to_le32((u32)(dma_addr >> 8));
-}
-
-/**
- * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
- *
- * If there are slots in the RX queue that need to be restocked,
- * and we have free pre-allocated buffers, fill the ranks as much
- * as we can, pulling from rx_free.
- *
- * This moves the 'write' index forward to catch up with 'processed', and
- * also updates the memory address in the firmware to reference the new
- * target buffer.
- */
-void iwlagn_rx_queue_restock(struct iwl_priv *priv)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- unsigned long flags;
-
- spin_lock_irqsave(&rxq->lock, flags);
- while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
- /* The overwritten rxb must be a used one */
- rxb = rxq->queue[rxq->write];
- BUG_ON(rxb && rxb->page);
-
- /* Get next free Rx buffer, remove from free list */
- element = rxq->rx_free.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
-
- /* Point to Rx buffer via next RBD in circular buffer */
- rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
- rxb->page_dma);
- rxq->queue[rxq->write] = rxb;
- rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
- rxq->free_count--;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
- /* If the pre-allocated buffer pool is dropping low, schedule to
- * refill it */
- if (rxq->free_count <= RX_LOW_WATERMARK)
- queue_work(priv->workqueue, &priv->rx_replenish);
-
-
- /* If we've added more space for the firmware to place data, tell it.
- * Increment device's write pointer in multiples of 8. */
- if (rxq->write_actual != (rxq->write & ~0x7)) {
- spin_lock_irqsave(&rxq->lock, flags);
- rxq->need_update = 1;
- spin_unlock_irqrestore(&rxq->lock, flags);
- iwl_rx_queue_update_write_ptr(priv, rxq);
- }
-}
-
-/**
- * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
- *
- * When moving to rx_free an SKB is allocated for the slot.
- *
- * Also restock the Rx queue via iwl_rx_queue_restock.
- * This is called as a scheduled work item (except for during initialization)
- */
-void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
-{
- struct iwl_rx_queue *rxq = &priv->rxq;
- struct list_head *element;
- struct iwl_rx_mem_buffer *rxb;
- struct page *page;
- unsigned long flags;
- gfp_t gfp_mask = priority;
-
- while (1) {
- spin_lock_irqsave(&rxq->lock, flags);
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- return;
- }
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- if (rxq->free_count > RX_LOW_WATERMARK)
- gfp_mask |= __GFP_NOWARN;
-
- if (priv->hw_params.rx_page_order > 0)
- gfp_mask |= __GFP_COMP;
-
- /* Alloc a new receive buffer */
- page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
- if (!page) {
- if (net_ratelimit())
- IWL_DEBUG_INFO(priv, "alloc_pages failed, "
- "order: %d\n",
- priv->hw_params.rx_page_order);
-
- if ((rxq->free_count <= RX_LOW_WATERMARK) &&
- net_ratelimit())
- IWL_CRIT(priv, "Failed to alloc_pages with %s. Only %u free buffers remaining.\n",
- priority == GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
- rxq->free_count);
- /* We don't reschedule replenish work here -- we will
- * call the restock method and if it still needs
- * more buffers it will schedule replenish */
- return;
- }
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- if (list_empty(&rxq->rx_used)) {
- spin_unlock_irqrestore(&rxq->lock, flags);
- __free_pages(page, priv->hw_params.rx_page_order);
- return;
- }
- element = rxq->rx_used.next;
- rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
- list_del(element);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- BUG_ON(rxb->page);
- rxb->page = page;
- /* Get physical address of the RB */
- rxb->page_dma = dma_map_page(priv->bus.dev, page, 0,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- DMA_FROM_DEVICE);
- /* dma address must be no more than 36 bits */
- BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
- /* and also 256 byte aligned! */
- BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
-
- spin_lock_irqsave(&rxq->lock, flags);
-
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
-
- spin_unlock_irqrestore(&rxq->lock, flags);
- }
-}
-
-void iwlagn_rx_replenish(struct iwl_priv *priv)
-{
- unsigned long flags;
-
- iwlagn_rx_allocate(priv, GFP_KERNEL);
-
- spin_lock_irqsave(&priv->lock, flags);
- iwlagn_rx_queue_restock(priv);
- spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-void iwlagn_rx_replenish_now(struct iwl_priv *priv)
-{
- iwlagn_rx_allocate(priv, GFP_ATOMIC);
-
- iwlagn_rx_queue_restock(priv);
-}
-
int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band)
{
int idx = 0;
iwlagn_dev_txfifo_flush(priv, IWL_DROP_ALL);
}
-/**
- * iwl_rx_handle - Main entry function for receiving responses from uCode
- *
- * Uses the priv->rx_handlers callback function array to invoke
- * the appropriate handlers, including command responses,
- * frame-received notifications, and other notifications.
- */
-static void iwl_rx_handle(struct iwl_priv *priv)
-{
- struct iwl_rx_mem_buffer *rxb;
- struct iwl_rx_packet *pkt;
- struct iwl_rx_queue *rxq = &priv->rxq;
- u32 r, i;
- int reclaim;
- unsigned long flags;
- u8 fill_rx = 0;
- u32 count = 8;
- int total_empty;
-
- /* uCode's read index (stored in shared DRAM) indicates the last Rx
- * buffer that the driver may process (last buffer filled by ucode). */
- r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
- i = rxq->read;
-
- /* Rx interrupt, but nothing sent from uCode */
- if (i == r)
- IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
-
- /* calculate total frames need to be restock after handling RX */
- total_empty = r - rxq->write_actual;
- if (total_empty < 0)
- total_empty += RX_QUEUE_SIZE;
-
- if (total_empty > (RX_QUEUE_SIZE / 2))
- fill_rx = 1;
-
- while (i != r) {
- int len;
-
- rxb = rxq->queue[i];
-
- /* If an RXB doesn't have a Rx queue slot associated with it,
- * then a bug has been introduced in the queue refilling
- * routines -- catch it here */
- if (WARN_ON(rxb == NULL)) {
- i = (i + 1) & RX_QUEUE_MASK;
- continue;
- }
-
- rxq->queue[i] = NULL;
-
- dma_unmap_page(priv->bus.dev, rxb->page_dma,
- PAGE_SIZE << priv->hw_params.rx_page_order,
- DMA_FROM_DEVICE);
- pkt = rxb_addr(rxb);
-
- IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
- i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
-
- len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
- len += sizeof(u32); /* account for status word */
- trace_iwlwifi_dev_rx(priv, pkt, len);
-
- /* Reclaim a command buffer only if this packet is a response
- * to a (driver-originated) command.
- * If the packet (e.g. Rx frame) originated from uCode,
- * there is no command buffer to reclaim.
- * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
- * but apparently a few don't get set; catch them here. */
- reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
- (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
- (pkt->hdr.cmd != REPLY_RX) &&
- (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
- (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
- (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
- (pkt->hdr.cmd != REPLY_TX);
-
- iwl_rx_dispatch(priv, rxb);
-
- /*
- * XXX: After here, we should always check rxb->page
- * against NULL before touching it or its virtual
- * memory (pkt). Because some rx_handler might have
- * already taken or freed the pages.
- */
-
- if (reclaim) {
- /* Invoke any callbacks, transfer the buffer to caller,
- * and fire off the (possibly) blocking
- * trans_send_cmd()
- * as we reclaim the driver command queue */
- if (rxb->page)
- iwl_tx_cmd_complete(priv, rxb);
- else
- IWL_WARN(priv, "Claim null rxb?\n");
- }
-
- /* Reuse the page if possible. For notification packets and
- * SKBs that fail to Rx correctly, add them back into the
- * rx_free list for reuse later. */
- spin_lock_irqsave(&rxq->lock, flags);
- if (rxb->page != NULL) {
- rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page,
- 0, PAGE_SIZE << priv->hw_params.rx_page_order,
- DMA_FROM_DEVICE);
- list_add_tail(&rxb->list, &rxq->rx_free);
- rxq->free_count++;
- } else
- list_add_tail(&rxb->list, &rxq->rx_used);
-
- spin_unlock_irqrestore(&rxq->lock, flags);
-
- i = (i + 1) & RX_QUEUE_MASK;
- /* If there are a lot of unused frames,
- * restock the Rx queue so ucode wont assert. */
- if (fill_rx) {
- count++;
- if (count >= 8) {
- rxq->read = i;
- iwlagn_rx_replenish_now(priv);
- count = 0;
- }
- }
- }
-
- /* Backtrack one entry */
- rxq->read = i;
- if (fill_rx)
- iwlagn_rx_replenish_now(priv);
- else
- iwlagn_rx_queue_restock(priv);
-}
-
-/* tasklet for iwlagn interrupt */
-void iwl_irq_tasklet(struct iwl_priv *priv)
-{
- u32 inta = 0;
- u32 handled = 0;
- unsigned long flags;
- u32 i;
-#ifdef CONFIG_IWLWIFI_DEBUG
- u32 inta_mask;
-#endif
-
- spin_lock_irqsave(&priv->lock, flags);
-
- /* Ack/clear/reset pending uCode interrupts.
- * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
- */
- /* There is a hardware bug in the interrupt mask function that some
- * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
- * they are disabled in the CSR_INT_MASK register. Furthermore the
- * ICT interrupt handling mechanism has another bug that might cause
- * these unmasked interrupts fail to be detected. We workaround the
- * hardware bugs here by ACKing all the possible interrupts so that
- * interrupt coalescing can still be achieved.
- */
- iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
-
- inta = priv->_agn.inta;
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
- /* just for debug */
- inta_mask = iwl_read32(priv, CSR_INT_MASK);
- IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
- inta, inta_mask);
- }
-#endif
-
- spin_unlock_irqrestore(&priv->lock, flags);
-
- /* saved interrupt in inta variable now we can reset priv->_agn.inta */
- priv->_agn.inta = 0;
-
- /* Now service all interrupt bits discovered above. */
- if (inta & CSR_INT_BIT_HW_ERR) {
- IWL_ERR(priv, "Hardware error detected. Restarting.\n");
-
- /* Tell the device to stop sending interrupts */
- iwl_disable_interrupts(priv);
-
- priv->isr_stats.hw++;
- iwl_irq_handle_error(priv);
-
- handled |= CSR_INT_BIT_HW_ERR;
-
- return;
- }
-
-#ifdef CONFIG_IWLWIFI_DEBUG
- if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
- /* NIC fires this, but we don't use it, redundant with WAKEUP */
- if (inta & CSR_INT_BIT_SCD) {
- IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
- "the frame/frames.\n");
- priv->isr_stats.sch++;
- }
-
- /* Alive notification via Rx interrupt will do the real work */
- if (inta & CSR_INT_BIT_ALIVE) {
- IWL_DEBUG_ISR(priv, "Alive interrupt\n");
- priv->isr_stats.alive++;
- }
- }
-#endif
- /* Safely ignore these bits for debug checks below */
- inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
-
- /* HW RF KILL switch toggled */
- if (inta & CSR_INT_BIT_RF_KILL) {
- int hw_rf_kill = 0;
- if (!(iwl_read32(priv, CSR_GP_CNTRL) &
- CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
- hw_rf_kill = 1;
-
- IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
- hw_rf_kill ? "disable radio" : "enable radio");
-
- priv->isr_stats.rfkill++;
-
- /* driver only loads ucode once setting the interface up.
- * the driver allows loading the ucode even if the radio
- * is killed. Hence update the killswitch state here. The
- * rfkill handler will care about restarting if needed.
- */
- if (!test_bit(STATUS_ALIVE, &priv->status)) {
- if (hw_rf_kill)
- set_bit(STATUS_RF_KILL_HW, &priv->status);
- else
- clear_bit(STATUS_RF_KILL_HW, &priv->status);
- wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
- }
-
- handled |= CSR_INT_BIT_RF_KILL;
- }
-
- /* Chip got too hot and stopped itself */
- if (inta & CSR_INT_BIT_CT_KILL) {
- IWL_ERR(priv, "Microcode CT kill error detected.\n");
- priv->isr_stats.ctkill++;
- handled |= CSR_INT_BIT_CT_KILL;
- }
-
- /* Error detected by uCode */
- if (inta & CSR_INT_BIT_SW_ERR) {
- IWL_ERR(priv, "Microcode SW error detected. "
- " Restarting 0x%X.\n", inta);
- priv->isr_stats.sw++;
- iwl_irq_handle_error(priv);
- handled |= CSR_INT_BIT_SW_ERR;
- }
-
- /* uCode wakes up after power-down sleep */
- if (inta & CSR_INT_BIT_WAKEUP) {
- IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
- iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
- for (i = 0; i < priv->hw_params.max_txq_num; i++)
- iwl_txq_update_write_ptr(priv, &priv->txq[i]);
-
- priv->isr_stats.wakeup++;
-
- handled |= CSR_INT_BIT_WAKEUP;
- }
-
- /* All uCode command responses, including Tx command responses,
- * Rx "responses" (frame-received notification), and other
- * notifications from uCode come through here*/
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
- CSR_INT_BIT_RX_PERIODIC)) {
- IWL_DEBUG_ISR(priv, "Rx interrupt\n");
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
- handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
- iwl_write32(priv, CSR_FH_INT_STATUS,
- CSR_FH_INT_RX_MASK);
- }
- if (inta & CSR_INT_BIT_RX_PERIODIC) {
- handled |= CSR_INT_BIT_RX_PERIODIC;
- iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
- }
- /* Sending RX interrupt require many steps to be done in the
- * the device:
- * 1- write interrupt to current index in ICT table.
- * 2- dma RX frame.
- * 3- update RX shared data to indicate last write index.
- * 4- send interrupt.
- * This could lead to RX race, driver could receive RX interrupt
- * but the shared data changes does not reflect this;
- * periodic interrupt will detect any dangling Rx activity.
- */
-
- /* Disable periodic interrupt; we use it as just a one-shot. */
- iwl_write8(priv, CSR_INT_PERIODIC_REG,
- CSR_INT_PERIODIC_DIS);
- iwl_rx_handle(priv);
-
- /*
- * Enable periodic interrupt in 8 msec only if we received
- * real RX interrupt (instead of just periodic int), to catch
- * any dangling Rx interrupt. If it was just the periodic
- * interrupt, there was no dangling Rx activity, and no need
- * to extend the periodic interrupt; one-shot is enough.
- */
- if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
- iwl_write8(priv, CSR_INT_PERIODIC_REG,
- CSR_INT_PERIODIC_ENA);
-
- priv->isr_stats.rx++;
- }
-
- /* This "Tx" DMA channel is used only for loading uCode */
- if (inta & CSR_INT_BIT_FH_TX) {
- iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
- IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
- priv->isr_stats.tx++;
- handled |= CSR_INT_BIT_FH_TX;
- /* Wake up uCode load routine, now that load is complete */
- priv->ucode_write_complete = 1;
- wake_up_interruptible(&priv->wait_command_queue);
- }
-
- if (inta & ~handled) {
- IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
- priv->isr_stats.unhandled++;
- }
-
- if (inta & ~(priv->inta_mask)) {
- IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
- inta & ~priv->inta_mask);
- }
-
- /* Re-enable all interrupts */
- /* only Re-enable if disabled by irq */
- if (test_bit(STATUS_INT_ENABLED, &priv->status))
- iwl_enable_interrupts(priv);
- /* Re-enable RF_KILL if it occurred */
- else if (handled & CSR_INT_BIT_RF_KILL)
- iwl_enable_rfkill_int(priv);
-}
-
/*****************************************************************************
*
* sysfs attributes
}
}
-static void iwl_bg_rx_replenish(struct work_struct *data)
-{
- struct iwl_priv *priv =
- container_of(data, struct iwl_priv, rx_replenish);
-
- if (test_bit(STATUS_EXIT_PENDING, &priv->status))
- return;
-
- mutex_lock(&priv->mutex);
- iwlagn_rx_replenish(priv);
- mutex_unlock(&priv->mutex);
-}
-
static int iwl_mac_offchannel_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
struct ieee80211_channel *chan,
enum nl80211_channel_type channel_type,
init_waitqueue_head(&priv->wait_command_queue);
INIT_WORK(&priv->restart, iwl_bg_restart);
- INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
INIT_WORK(&priv->beacon_update, iwl_bg_beacon_update);
INIT_WORK(&priv->run_time_calib_work, iwl_bg_run_time_calib_work);
INIT_WORK(&priv->tx_flush, iwl_bg_tx_flush);
int iwlagn_send_tx_power(struct iwl_priv *priv);
void iwlagn_temperature(struct iwl_priv *priv);
u16 iwlagn_eeprom_calib_version(struct iwl_priv *priv);
-int iwlagn_rx_init(struct iwl_priv *priv, struct iwl_rx_queue *rxq);
int iwlagn_hw_nic_init(struct iwl_priv *priv);
int iwlagn_wait_tx_queue_empty(struct iwl_priv *priv);
int iwlagn_txfifo_flush(struct iwl_priv *priv, u16 flush_control);
int iwlagn_send_beacon_cmd(struct iwl_priv *priv);
/* rx */
-void iwl_irq_tasklet(struct iwl_priv *priv);
-void iwlagn_rx_queue_restock(struct iwl_priv *priv);
-void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority);
-void iwlagn_rx_replenish(struct iwl_priv *priv);
-void iwlagn_rx_replenish_now(struct iwl_priv *priv);
int iwlagn_hwrate_to_mac80211_idx(u32 rate_n_flags, enum ieee80211_band band);
void iwl_setup_rx_handlers(struct iwl_priv *priv);
void iwl_rx_dispatch(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
/*****************************************************
* RX
******************************************************/
-void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
- struct iwl_rx_queue *q);
-int iwl_rx_queue_space(const struct iwl_rx_queue *q);
void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb);
void iwl_chswitch_done(struct iwl_priv *priv, bool is_success);
#include "iwl-agn-calib.h"
#include "iwl-agn.h"
-/******************************************************************************
- *
- * RX path functions
- *
- ******************************************************************************/
-
-/*
- * Rx theory of operation
- *
- * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
- * each of which point to Receive Buffers to be filled by the NIC. These get
- * used not only for Rx frames, but for any command response or notification
- * from the NIC. The driver and NIC manage the Rx buffers by means
- * of indexes into the circular buffer.
- *
- * Rx Queue Indexes
- * The host/firmware share two index registers for managing the Rx buffers.
- *
- * The READ index maps to the first position that the firmware may be writing
- * to -- the driver can read up to (but not including) this position and get
- * good data.
- * The READ index is managed by the firmware once the card is enabled.
- *
- * The WRITE index maps to the last position the driver has read from -- the
- * position preceding WRITE is the last slot the firmware can place a packet.
- *
- * The queue is empty (no good data) if WRITE = READ - 1, and is full if
- * WRITE = READ.
- *
- * During initialization, the host sets up the READ queue position to the first
- * INDEX position, and WRITE to the last (READ - 1 wrapped)
- *
- * When the firmware places a packet in a buffer, it will advance the READ index
- * and fire the RX interrupt. The driver can then query the READ index and
- * process as many packets as possible, moving the WRITE index forward as it
- * resets the Rx queue buffers with new memory.
- *
- * The management in the driver is as follows:
- * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
- * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
- * to replenish the iwl->rxq->rx_free.
- * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
- * iwl->rxq is replenished and the READ INDEX is updated (updating the
- * 'processed' and 'read' driver indexes as well)
- * + A received packet is processed and handed to the kernel network stack,
- * detached from the iwl->rxq. The driver 'processed' index is updated.
- * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
- * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
- * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
- * were enough free buffers and RX_STALLED is set it is cleared.
- *
- *
- * Driver sequence:
- *
- * iwl_rx_queue_alloc() Allocates rx_free
- * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls
- * iwl_rx_queue_restock
- * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
- * queue, updates firmware pointers, and updates
- * the WRITE index. If insufficient rx_free buffers
- * are available, schedules iwl_rx_replenish
- *
- * -- enable interrupts --
- * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the
- * READ INDEX, detaching the SKB from the pool.
- * Moves the packet buffer from queue to rx_used.
- * Calls iwl_rx_queue_restock to refill any empty
- * slots.
- * ...
- *
- */
-
-/**
- * iwl_rx_queue_space - Return number of free slots available in queue.
- */
-int iwl_rx_queue_space(const struct iwl_rx_queue *q)
-{
- int s = q->read - q->write;
- if (s <= 0)
- s += RX_QUEUE_SIZE;
- /* keep some buffer to not confuse full and empty queue */
- s -= 2;
- if (s < 0)
- s = 0;
- return s;
-}
-
-/**
- * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
- */
-void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv, struct iwl_rx_queue *q)
-{
- unsigned long flags;
- u32 reg;
-
- spin_lock_irqsave(&q->lock, flags);
-
- if (q->need_update == 0)
- goto exit_unlock;
-
- if (priv->cfg->base_params->shadow_reg_enable) {
- /* shadow register enabled */
- /* Device expects a multiple of 8 */
- q->write_actual = (q->write & ~0x7);
- iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write_actual);
- } else {
- /* If power-saving is in use, make sure device is awake */
- if (test_bit(STATUS_POWER_PMI, &priv->status)) {
- reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
-
- if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
- IWL_DEBUG_INFO(priv,
- "Rx queue requesting wakeup,"
- " GP1 = 0x%x\n", reg);
- iwl_set_bit(priv, CSR_GP_CNTRL,
- CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
- goto exit_unlock;
- }
-
- q->write_actual = (q->write & ~0x7);
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
- q->write_actual);
-
- /* Else device is assumed to be awake */
- } else {
- /* Device expects a multiple of 8 */
- q->write_actual = (q->write & ~0x7);
- iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
- q->write_actual);
- }
- }
- q->need_update = 0;
-
- exit_unlock:
- spin_unlock_irqrestore(&q->lock, flags);
-}
/******************************************************************************
*
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#ifndef __iwl_trans_int_pcie_h__
+#define __iwl_trans_int_pcie_h__
+
+/*This file includes the declaration that are internal to the
+ * trans_pcie layer */
+
+void iwl_bg_rx_replenish(struct work_struct *data);
+void iwl_irq_tasklet(struct iwl_priv *priv);
+void iwlagn_rx_replenish(struct iwl_priv *priv);
+void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
+ struct iwl_rx_queue *q);
+
+#endif /* __iwl_trans_int_pcie_h__ */
+
--- /dev/null
+/******************************************************************************
+ *
+ * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
+ *
+ * Portions of this file are derived from the ipw3945 project, as well
+ * as portions of the ieee80211 subsystem header files.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * Intel Linux Wireless <ilw@linux.intel.com>
+ * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
+ *
+ *****************************************************************************/
+#include <linux/sched.h>
+#include <linux/wait.h>
+
+#include "iwl-dev.h"
+#include "iwl-agn.h"
+#include "iwl-core.h"
+#include "iwl-io.h"
+#include "iwl-helpers.h"
+#include "iwl-trans-int-pcie.h"
+
+/******************************************************************************
+ *
+ * RX path functions
+ *
+ ******************************************************************************/
+
+/*
+ * Rx theory of operation
+ *
+ * Driver allocates a circular buffer of Receive Buffer Descriptors (RBDs),
+ * each of which point to Receive Buffers to be filled by the NIC. These get
+ * used not only for Rx frames, but for any command response or notification
+ * from the NIC. The driver and NIC manage the Rx buffers by means
+ * of indexes into the circular buffer.
+ *
+ * Rx Queue Indexes
+ * The host/firmware share two index registers for managing the Rx buffers.
+ *
+ * The READ index maps to the first position that the firmware may be writing
+ * to -- the driver can read up to (but not including) this position and get
+ * good data.
+ * The READ index is managed by the firmware once the card is enabled.
+ *
+ * The WRITE index maps to the last position the driver has read from -- the
+ * position preceding WRITE is the last slot the firmware can place a packet.
+ *
+ * The queue is empty (no good data) if WRITE = READ - 1, and is full if
+ * WRITE = READ.
+ *
+ * During initialization, the host sets up the READ queue position to the first
+ * INDEX position, and WRITE to the last (READ - 1 wrapped)
+ *
+ * When the firmware places a packet in a buffer, it will advance the READ index
+ * and fire the RX interrupt. The driver can then query the READ index and
+ * process as many packets as possible, moving the WRITE index forward as it
+ * resets the Rx queue buffers with new memory.
+ *
+ * The management in the driver is as follows:
+ * + A list of pre-allocated SKBs is stored in iwl->rxq->rx_free. When
+ * iwl->rxq->free_count drops to or below RX_LOW_WATERMARK, work is scheduled
+ * to replenish the iwl->rxq->rx_free.
+ * + In iwl_rx_replenish (scheduled) if 'processed' != 'read' then the
+ * iwl->rxq is replenished and the READ INDEX is updated (updating the
+ * 'processed' and 'read' driver indexes as well)
+ * + A received packet is processed and handed to the kernel network stack,
+ * detached from the iwl->rxq. The driver 'processed' index is updated.
+ * + The Host/Firmware iwl->rxq is replenished at tasklet time from the rx_free
+ * list. If there are no allocated buffers in iwl->rxq->rx_free, the READ
+ * INDEX is not incremented and iwl->status(RX_STALLED) is set. If there
+ * were enough free buffers and RX_STALLED is set it is cleared.
+ *
+ *
+ * Driver sequence:
+ *
+ * iwl_rx_queue_alloc() Allocates rx_free
+ * iwl_rx_replenish() Replenishes rx_free list from rx_used, and calls
+ * iwl_rx_queue_restock
+ * iwl_rx_queue_restock() Moves available buffers from rx_free into Rx
+ * queue, updates firmware pointers, and updates
+ * the WRITE index. If insufficient rx_free buffers
+ * are available, schedules iwl_rx_replenish
+ *
+ * -- enable interrupts --
+ * ISR - iwl_rx() Detach iwl_rx_mem_buffers from pool up to the
+ * READ INDEX, detaching the SKB from the pool.
+ * Moves the packet buffer from queue to rx_used.
+ * Calls iwl_rx_queue_restock to refill any empty
+ * slots.
+ * ...
+ *
+ */
+
+/**
+ * iwl_rx_queue_space - Return number of free slots available in queue.
+ */
+static int iwl_rx_queue_space(const struct iwl_rx_queue *q)
+{
+ int s = q->read - q->write;
+ if (s <= 0)
+ s += RX_QUEUE_SIZE;
+ /* keep some buffer to not confuse full and empty queue */
+ s -= 2;
+ if (s < 0)
+ s = 0;
+ return s;
+}
+
+/**
+ * iwl_rx_queue_update_write_ptr - Update the write pointer for the RX queue
+ */
+void iwl_rx_queue_update_write_ptr(struct iwl_priv *priv,
+ struct iwl_rx_queue *q)
+{
+ unsigned long flags;
+ u32 reg;
+
+ spin_lock_irqsave(&q->lock, flags);
+
+ if (q->need_update == 0)
+ goto exit_unlock;
+
+ if (priv->cfg->base_params->shadow_reg_enable) {
+ /* shadow register enabled */
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ iwl_write32(priv, FH_RSCSR_CHNL0_WPTR, q->write_actual);
+ } else {
+ /* If power-saving is in use, make sure device is awake */
+ if (test_bit(STATUS_POWER_PMI, &priv->status)) {
+ reg = iwl_read32(priv, CSR_UCODE_DRV_GP1);
+
+ if (reg & CSR_UCODE_DRV_GP1_BIT_MAC_SLEEP) {
+ IWL_DEBUG_INFO(priv,
+ "Rx queue requesting wakeup,"
+ " GP1 = 0x%x\n", reg);
+ iwl_set_bit(priv, CSR_GP_CNTRL,
+ CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
+ goto exit_unlock;
+ }
+
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
+ q->write_actual);
+
+ /* Else device is assumed to be awake */
+ } else {
+ /* Device expects a multiple of 8 */
+ q->write_actual = (q->write & ~0x7);
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_WPTR,
+ q->write_actual);
+ }
+ }
+ q->need_update = 0;
+
+ exit_unlock:
+ spin_unlock_irqrestore(&q->lock, flags);
+}
+
+/**
+ * iwlagn_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
+ */
+static inline __le32 iwlagn_dma_addr2rbd_ptr(struct iwl_priv *priv,
+ dma_addr_t dma_addr)
+{
+ return cpu_to_le32((u32)(dma_addr >> 8));
+}
+
+/**
+ * iwlagn_rx_queue_restock - refill RX queue from pre-allocated pool
+ *
+ * If there are slots in the RX queue that need to be restocked,
+ * and we have free pre-allocated buffers, fill the ranks as much
+ * as we can, pulling from rx_free.
+ *
+ * This moves the 'write' index forward to catch up with 'processed', and
+ * also updates the memory address in the firmware to reference the new
+ * target buffer.
+ */
+static void iwlagn_rx_queue_restock(struct iwl_priv *priv)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxq->lock, flags);
+ while ((iwl_rx_queue_space(rxq) > 0) && (rxq->free_count)) {
+ /* The overwritten rxb must be a used one */
+ rxb = rxq->queue[rxq->write];
+ BUG_ON(rxb && rxb->page);
+
+ /* Get next free Rx buffer, remove from free list */
+ element = rxq->rx_free.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ /* Point to Rx buffer via next RBD in circular buffer */
+ rxq->bd[rxq->write] = iwlagn_dma_addr2rbd_ptr(priv,
+ rxb->page_dma);
+ rxq->queue[rxq->write] = rxb;
+ rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
+ rxq->free_count--;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ /* If the pre-allocated buffer pool is dropping low, schedule to
+ * refill it */
+ if (rxq->free_count <= RX_LOW_WATERMARK)
+ queue_work(priv->workqueue, &priv->rx_replenish);
+
+
+ /* If we've added more space for the firmware to place data, tell it.
+ * Increment device's write pointer in multiples of 8. */
+ if (rxq->write_actual != (rxq->write & ~0x7)) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ rxq->need_update = 1;
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ iwl_rx_queue_update_write_ptr(priv, rxq);
+ }
+}
+
+/**
+ * iwlagn_rx_replenish - Move all used packet from rx_used to rx_free
+ *
+ * When moving to rx_free an SKB is allocated for the slot.
+ *
+ * Also restock the Rx queue via iwl_rx_queue_restock.
+ * This is called as a scheduled work item (except for during initialization)
+ */
+static void iwlagn_rx_allocate(struct iwl_priv *priv, gfp_t priority)
+{
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ struct list_head *element;
+ struct iwl_rx_mem_buffer *rxb;
+ struct page *page;
+ unsigned long flags;
+ gfp_t gfp_mask = priority;
+
+ while (1) {
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ if (rxq->free_count > RX_LOW_WATERMARK)
+ gfp_mask |= __GFP_NOWARN;
+
+ if (priv->hw_params.rx_page_order > 0)
+ gfp_mask |= __GFP_COMP;
+
+ /* Alloc a new receive buffer */
+ page = alloc_pages(gfp_mask, priv->hw_params.rx_page_order);
+ if (!page) {
+ if (net_ratelimit())
+ IWL_DEBUG_INFO(priv, "alloc_pages failed, "
+ "order: %d\n",
+ priv->hw_params.rx_page_order);
+
+ if ((rxq->free_count <= RX_LOW_WATERMARK) &&
+ net_ratelimit())
+ IWL_CRIT(priv, "Failed to alloc_pages with %s."
+ "Only %u free buffers remaining.\n",
+ priority == GFP_ATOMIC ?
+ "GFP_ATOMIC" : "GFP_KERNEL",
+ rxq->free_count);
+ /* We don't reschedule replenish work here -- we will
+ * call the restock method and if it still needs
+ * more buffers it will schedule replenish */
+ return;
+ }
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ if (list_empty(&rxq->rx_used)) {
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ __free_pages(page, priv->hw_params.rx_page_order);
+ return;
+ }
+ element = rxq->rx_used.next;
+ rxb = list_entry(element, struct iwl_rx_mem_buffer, list);
+ list_del(element);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ BUG_ON(rxb->page);
+ rxb->page = page;
+ /* Get physical address of the RB */
+ rxb->page_dma = dma_map_page(priv->bus.dev, page, 0,
+ PAGE_SIZE << priv->hw_params.rx_page_order,
+ DMA_FROM_DEVICE);
+ /* dma address must be no more than 36 bits */
+ BUG_ON(rxb->page_dma & ~DMA_BIT_MASK(36));
+ /* and also 256 byte aligned! */
+ BUG_ON(rxb->page_dma & DMA_BIT_MASK(8));
+
+ spin_lock_irqsave(&rxq->lock, flags);
+
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+ }
+}
+
+void iwlagn_rx_replenish(struct iwl_priv *priv)
+{
+ unsigned long flags;
+
+ iwlagn_rx_allocate(priv, GFP_KERNEL);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ iwlagn_rx_queue_restock(priv);
+ spin_unlock_irqrestore(&priv->lock, flags);
+}
+
+static void iwlagn_rx_replenish_now(struct iwl_priv *priv)
+{
+ iwlagn_rx_allocate(priv, GFP_ATOMIC);
+
+ iwlagn_rx_queue_restock(priv);
+}
+
+void iwl_bg_rx_replenish(struct work_struct *data)
+{
+ struct iwl_priv *priv =
+ container_of(data, struct iwl_priv, rx_replenish);
+
+ if (test_bit(STATUS_EXIT_PENDING, &priv->status))
+ return;
+
+ mutex_lock(&priv->mutex);
+ iwlagn_rx_replenish(priv);
+ mutex_unlock(&priv->mutex);
+}
+
+/**
+ * iwl_rx_handle - Main entry function for receiving responses from uCode
+ *
+ * Uses the priv->rx_handlers callback function array to invoke
+ * the appropriate handlers, including command responses,
+ * frame-received notifications, and other notifications.
+ */
+static void iwl_rx_handle(struct iwl_priv *priv)
+{
+ struct iwl_rx_mem_buffer *rxb;
+ struct iwl_rx_packet *pkt;
+ struct iwl_rx_queue *rxq = &priv->rxq;
+ u32 r, i;
+ int reclaim;
+ unsigned long flags;
+ u8 fill_rx = 0;
+ u32 count = 8;
+ int total_empty;
+
+ /* uCode's read index (stored in shared DRAM) indicates the last Rx
+ * buffer that the driver may process (last buffer filled by ucode). */
+ r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
+ i = rxq->read;
+
+ /* Rx interrupt, but nothing sent from uCode */
+ if (i == r)
+ IWL_DEBUG_RX(priv, "r = %d, i = %d\n", r, i);
+
+ /* calculate total frames need to be restock after handling RX */
+ total_empty = r - rxq->write_actual;
+ if (total_empty < 0)
+ total_empty += RX_QUEUE_SIZE;
+
+ if (total_empty > (RX_QUEUE_SIZE / 2))
+ fill_rx = 1;
+
+ while (i != r) {
+ int len;
+
+ rxb = rxq->queue[i];
+
+ /* If an RXB doesn't have a Rx queue slot associated with it,
+ * then a bug has been introduced in the queue refilling
+ * routines -- catch it here */
+ if (WARN_ON(rxb == NULL)) {
+ i = (i + 1) & RX_QUEUE_MASK;
+ continue;
+ }
+
+ rxq->queue[i] = NULL;
+
+ dma_unmap_page(priv->bus.dev, rxb->page_dma,
+ PAGE_SIZE << priv->hw_params.rx_page_order,
+ DMA_FROM_DEVICE);
+ pkt = rxb_addr(rxb);
+
+ IWL_DEBUG_RX(priv, "r = %d, i = %d, %s, 0x%02x\n", r,
+ i, get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
+
+ len = le32_to_cpu(pkt->len_n_flags) & FH_RSCSR_FRAME_SIZE_MSK;
+ len += sizeof(u32); /* account for status word */
+ trace_iwlwifi_dev_rx(priv, pkt, len);
+
+ /* Reclaim a command buffer only if this packet is a response
+ * to a (driver-originated) command.
+ * If the packet (e.g. Rx frame) originated from uCode,
+ * there is no command buffer to reclaim.
+ * Ucode should set SEQ_RX_FRAME bit if ucode-originated,
+ * but apparently a few don't get set; catch them here. */
+ reclaim = !(pkt->hdr.sequence & SEQ_RX_FRAME) &&
+ (pkt->hdr.cmd != REPLY_RX_PHY_CMD) &&
+ (pkt->hdr.cmd != REPLY_RX) &&
+ (pkt->hdr.cmd != REPLY_RX_MPDU_CMD) &&
+ (pkt->hdr.cmd != REPLY_COMPRESSED_BA) &&
+ (pkt->hdr.cmd != STATISTICS_NOTIFICATION) &&
+ (pkt->hdr.cmd != REPLY_TX);
+
+ iwl_rx_dispatch(priv, rxb);
+
+ /*
+ * XXX: After here, we should always check rxb->page
+ * against NULL before touching it or its virtual
+ * memory (pkt). Because some rx_handler might have
+ * already taken or freed the pages.
+ */
+
+ if (reclaim) {
+ /* Invoke any callbacks, transfer the buffer to caller,
+ * and fire off the (possibly) blocking
+ * trans_send_cmd()
+ * as we reclaim the driver command queue */
+ if (rxb->page)
+ iwl_tx_cmd_complete(priv, rxb);
+ else
+ IWL_WARN(priv, "Claim null rxb?\n");
+ }
+
+ /* Reuse the page if possible. For notification packets and
+ * SKBs that fail to Rx correctly, add them back into the
+ * rx_free list for reuse later. */
+ spin_lock_irqsave(&rxq->lock, flags);
+ if (rxb->page != NULL) {
+ rxb->page_dma = dma_map_page(priv->bus.dev, rxb->page,
+ 0, PAGE_SIZE << priv->hw_params.rx_page_order,
+ DMA_FROM_DEVICE);
+ list_add_tail(&rxb->list, &rxq->rx_free);
+ rxq->free_count++;
+ } else
+ list_add_tail(&rxb->list, &rxq->rx_used);
+
+ spin_unlock_irqrestore(&rxq->lock, flags);
+
+ i = (i + 1) & RX_QUEUE_MASK;
+ /* If there are a lot of unused frames,
+ * restock the Rx queue so ucode wont assert. */
+ if (fill_rx) {
+ count++;
+ if (count >= 8) {
+ rxq->read = i;
+ iwlagn_rx_replenish_now(priv);
+ count = 0;
+ }
+ }
+ }
+
+ /* Backtrack one entry */
+ rxq->read = i;
+ if (fill_rx)
+ iwlagn_rx_replenish_now(priv);
+ else
+ iwlagn_rx_queue_restock(priv);
+}
+
+/* tasklet for iwlagn interrupt */
+void iwl_irq_tasklet(struct iwl_priv *priv)
+{
+ u32 inta = 0;
+ u32 handled = 0;
+ unsigned long flags;
+ u32 i;
+#ifdef CONFIG_IWLWIFI_DEBUG
+ u32 inta_mask;
+#endif
+
+ spin_lock_irqsave(&priv->lock, flags);
+
+ /* Ack/clear/reset pending uCode interrupts.
+ * Note: Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
+ */
+ /* There is a hardware bug in the interrupt mask function that some
+ * interrupts (i.e. CSR_INT_BIT_SCD) can still be generated even if
+ * they are disabled in the CSR_INT_MASK register. Furthermore the
+ * ICT interrupt handling mechanism has another bug that might cause
+ * these unmasked interrupts fail to be detected. We workaround the
+ * hardware bugs here by ACKing all the possible interrupts so that
+ * interrupt coalescing can still be achieved.
+ */
+ iwl_write32(priv, CSR_INT, priv->_agn.inta | ~priv->inta_mask);
+
+ inta = priv->_agn.inta;
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(priv) & IWL_DL_ISR) {
+ /* just for debug */
+ inta_mask = iwl_read32(priv, CSR_INT_MASK);
+ IWL_DEBUG_ISR(priv, "inta 0x%08x, enabled 0x%08x\n ",
+ inta, inta_mask);
+ }
+#endif
+
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ /* saved interrupt in inta variable now we can reset priv->_agn.inta */
+ priv->_agn.inta = 0;
+
+ /* Now service all interrupt bits discovered above. */
+ if (inta & CSR_INT_BIT_HW_ERR) {
+ IWL_ERR(priv, "Hardware error detected. Restarting.\n");
+
+ /* Tell the device to stop sending interrupts */
+ iwl_disable_interrupts(priv);
+
+ priv->isr_stats.hw++;
+ iwl_irq_handle_error(priv);
+
+ handled |= CSR_INT_BIT_HW_ERR;
+
+ return;
+ }
+
+#ifdef CONFIG_IWLWIFI_DEBUG
+ if (iwl_get_debug_level(priv) & (IWL_DL_ISR)) {
+ /* NIC fires this, but we don't use it, redundant with WAKEUP */
+ if (inta & CSR_INT_BIT_SCD) {
+ IWL_DEBUG_ISR(priv, "Scheduler finished to transmit "
+ "the frame/frames.\n");
+ priv->isr_stats.sch++;
+ }
+
+ /* Alive notification via Rx interrupt will do the real work */
+ if (inta & CSR_INT_BIT_ALIVE) {
+ IWL_DEBUG_ISR(priv, "Alive interrupt\n");
+ priv->isr_stats.alive++;
+ }
+ }
+#endif
+ /* Safely ignore these bits for debug checks below */
+ inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);
+
+ /* HW RF KILL switch toggled */
+ if (inta & CSR_INT_BIT_RF_KILL) {
+ int hw_rf_kill = 0;
+ if (!(iwl_read32(priv, CSR_GP_CNTRL) &
+ CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
+ hw_rf_kill = 1;
+
+ IWL_WARN(priv, "RF_KILL bit toggled to %s.\n",
+ hw_rf_kill ? "disable radio" : "enable radio");
+
+ priv->isr_stats.rfkill++;
+
+ /* driver only loads ucode once setting the interface up.
+ * the driver allows loading the ucode even if the radio
+ * is killed. Hence update the killswitch state here. The
+ * rfkill handler will care about restarting if needed.
+ */
+ if (!test_bit(STATUS_ALIVE, &priv->status)) {
+ if (hw_rf_kill)
+ set_bit(STATUS_RF_KILL_HW, &priv->status);
+ else
+ clear_bit(STATUS_RF_KILL_HW, &priv->status);
+ wiphy_rfkill_set_hw_state(priv->hw->wiphy, hw_rf_kill);
+ }
+
+ handled |= CSR_INT_BIT_RF_KILL;
+ }
+
+ /* Chip got too hot and stopped itself */
+ if (inta & CSR_INT_BIT_CT_KILL) {
+ IWL_ERR(priv, "Microcode CT kill error detected.\n");
+ priv->isr_stats.ctkill++;
+ handled |= CSR_INT_BIT_CT_KILL;
+ }
+
+ /* Error detected by uCode */
+ if (inta & CSR_INT_BIT_SW_ERR) {
+ IWL_ERR(priv, "Microcode SW error detected. "
+ " Restarting 0x%X.\n", inta);
+ priv->isr_stats.sw++;
+ iwl_irq_handle_error(priv);
+ handled |= CSR_INT_BIT_SW_ERR;
+ }
+
+ /* uCode wakes up after power-down sleep */
+ if (inta & CSR_INT_BIT_WAKEUP) {
+ IWL_DEBUG_ISR(priv, "Wakeup interrupt\n");
+ iwl_rx_queue_update_write_ptr(priv, &priv->rxq);
+ for (i = 0; i < priv->hw_params.max_txq_num; i++)
+ iwl_txq_update_write_ptr(priv, &priv->txq[i]);
+
+ priv->isr_stats.wakeup++;
+
+ handled |= CSR_INT_BIT_WAKEUP;
+ }
+
+ /* All uCode command responses, including Tx command responses,
+ * Rx "responses" (frame-received notification), and other
+ * notifications from uCode come through here*/
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX |
+ CSR_INT_BIT_RX_PERIODIC)) {
+ IWL_DEBUG_ISR(priv, "Rx interrupt\n");
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
+ handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
+ iwl_write32(priv, CSR_FH_INT_STATUS,
+ CSR_FH_INT_RX_MASK);
+ }
+ if (inta & CSR_INT_BIT_RX_PERIODIC) {
+ handled |= CSR_INT_BIT_RX_PERIODIC;
+ iwl_write32(priv, CSR_INT, CSR_INT_BIT_RX_PERIODIC);
+ }
+ /* Sending RX interrupt require many steps to be done in the
+ * the device:
+ * 1- write interrupt to current index in ICT table.
+ * 2- dma RX frame.
+ * 3- update RX shared data to indicate last write index.
+ * 4- send interrupt.
+ * This could lead to RX race, driver could receive RX interrupt
+ * but the shared data changes does not reflect this;
+ * periodic interrupt will detect any dangling Rx activity.
+ */
+
+ /* Disable periodic interrupt; we use it as just a one-shot. */
+ iwl_write8(priv, CSR_INT_PERIODIC_REG,
+ CSR_INT_PERIODIC_DIS);
+ iwl_rx_handle(priv);
+
+ /*
+ * Enable periodic interrupt in 8 msec only if we received
+ * real RX interrupt (instead of just periodic int), to catch
+ * any dangling Rx interrupt. If it was just the periodic
+ * interrupt, there was no dangling Rx activity, and no need
+ * to extend the periodic interrupt; one-shot is enough.
+ */
+ if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX))
+ iwl_write8(priv, CSR_INT_PERIODIC_REG,
+ CSR_INT_PERIODIC_ENA);
+
+ priv->isr_stats.rx++;
+ }
+
+ /* This "Tx" DMA channel is used only for loading uCode */
+ if (inta & CSR_INT_BIT_FH_TX) {
+ iwl_write32(priv, CSR_FH_INT_STATUS, CSR_FH_INT_TX_MASK);
+ IWL_DEBUG_ISR(priv, "uCode load interrupt\n");
+ priv->isr_stats.tx++;
+ handled |= CSR_INT_BIT_FH_TX;
+ /* Wake up uCode load routine, now that load is complete */
+ priv->ucode_write_complete = 1;
+ wake_up_interruptible(&priv->wait_command_queue);
+ }
+
+ if (inta & ~handled) {
+ IWL_ERR(priv, "Unhandled INTA bits 0x%08x\n", inta & ~handled);
+ priv->isr_stats.unhandled++;
+ }
+
+ if (inta & ~(priv->inta_mask)) {
+ IWL_WARN(priv, "Disabled INTA bits 0x%08x were pending\n",
+ inta & ~priv->inta_mask);
+ }
+
+ /* Re-enable all interrupts */
+ /* only Re-enable if disabled by irq */
+ if (test_bit(STATUS_INT_ENABLED, &priv->status))
+ iwl_enable_interrupts(priv);
+ /* Re-enable RF_KILL if it occurred */
+ else if (handled & CSR_INT_BIT_RF_KILL)
+ iwl_enable_rfkill_int(priv);
+}
+
#include "iwl-trans.h"
#include "iwl-core.h"
#include "iwl-helpers.h"
+#include "iwl-trans-int-pcie.h"
/*TODO remove uneeded includes when the transport layer tx_free will be here */
#include "iwl-agn.h"
#include "iwl-core.h"
}
}
+static void iwl_trans_rx_hw_init(struct iwl_priv *priv,
+ struct iwl_rx_queue *rxq)
+{
+ u32 rb_size;
+ const u32 rfdnlog = RX_QUEUE_SIZE_LOG; /* 256 RBDs */
+ u32 rb_timeout = 0; /* FIXME: RX_RB_TIMEOUT for all devices? */
+
+ rb_timeout = RX_RB_TIMEOUT;
+
+ if (iwlagn_mod_params.amsdu_size_8K)
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
+ else
+ rb_size = FH_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;
+
+ /* Stop Rx DMA */
+ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG, 0);
+
+ /* Reset driver's Rx queue write index */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);
+
+ /* Tell device where to find RBD circular buffer in DRAM */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_RBDCB_BASE_REG,
+ (u32)(rxq->bd_dma >> 8));
+
+ /* Tell device where in DRAM to update its Rx status */
+ iwl_write_direct32(priv, FH_RSCSR_CHNL0_STTS_WPTR_REG,
+ rxq->rb_stts_dma >> 4);
+
+ /* Enable Rx DMA
+ * FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY is set because of HW bug in
+ * the credit mechanism in 5000 HW RX FIFO
+ * Direct rx interrupts to hosts
+ * Rx buffer size 4 or 8k
+ * RB timeout 0x10
+ * 256 RBDs
+ */
+ iwl_write_direct32(priv, FH_MEM_RCSR_CHNL0_CONFIG_REG,
+ FH_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
+ FH_RCSR_CHNL0_RX_IGNORE_RXF_EMPTY |
+ FH_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
+ FH_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
+ rb_size|
+ (rb_timeout << FH_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS)|
+ (rfdnlog << FH_RCSR_RX_CONFIG_RBDCB_SIZE_POS));
+
+ /* Set interrupt coalescing timer to default (2048 usecs) */
+ iwl_write8(priv, CSR_INT_COALESCING, IWL_HOST_INT_TIMEOUT_DEF);
+}
+
static int iwl_trans_rx_init(struct iwl_priv *priv)
{
struct iwl_rx_queue *rxq = &priv->rxq;
rxq->free_count = 0;
spin_unlock_irqrestore(&rxq->lock, flags);
+ iwlagn_rx_replenish(priv);
+
+ iwl_trans_rx_hw_init(priv, rxq);
+
+ spin_lock_irqsave(&priv->lock, flags);
+ rxq->need_update = 1;
+ iwl_rx_queue_update_write_ptr(priv, rxq);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
return 0;
}
tasklet_init(&priv->irq_tasklet, (void (*)(unsigned long))
iwl_irq_tasklet, (unsigned long)priv);
+ INIT_WORK(&priv->rx_replenish, iwl_bg_rx_replenish);
+
return 0;
}
projects / cascardo / linux.git / commitdiff