This patch enables Extended Logins support in Qlogic ISP.
To enable extended login with Qlogic ISP24XX/25XX/26XX,
set module parameter ql2xexlogins to any non-zero number.
This will alow ISP firmware to store port database structure
information of remote login sessions to host memory provided
by driver. ISP firmware supports upto 16k total logins.
Signed-off-by: Himanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
* | Module Init and Probe | 0x017f | 0x0146 |
* | | | 0x015b-0x0160 |
* | | | 0x016e-0x0170 |
- * | Mailbox commands | 0x118d | 0x1115-0x1116 |
+ * | Mailbox commands | 0x1192 | 0x1018-0x1019 |
* | | | 0x111a-0x111b |
* | Device Discovery | 0x2016 | 0x2020-0x2022, |
* | | | 0x2011-0x2012, |
* | | | 0xb13c-0xb140 |
* | | | 0xb149 |
* | MultiQ | 0xc00c | |
- * | Misc | 0xd300 | 0xd016-0xd017 |
- * | | | 0xd021,0xd024 |
- * | | | 0xd025,0xd029 |
- * | | | 0xd02a,0xd02e |
+ * | Misc | 0xd300 | 0xd012-0xd014 |
+ * | | | 0xd016-0xd017 |
+ * | | | 0xd02e |
* | | | 0xd031-0xd0ff |
* | | | 0xd101-0xd1fe |
* | | | 0xd214-0xd2fe |
#define MBC_DISABLE_VI 0x24 /* Disable VI operation. */
#define MBC_ENABLE_VI 0x25 /* Enable VI operation. */
#define MBC_GET_FIRMWARE_OPTION 0x28 /* Get Firmware Options. */
+#define MBC_GET_MEM_OFFLOAD_CNTRL_STAT 0x34 /* Memory Offload ctrl/Stat*/
#define MBC_SET_FIRMWARE_OPTION 0x38 /* Set Firmware Options. */
#define MBC_LOOP_PORT_BYPASS 0x40 /* Loop Port Bypass. */
#define MBC_LOOP_PORT_ENABLE 0x41 /* Loop Port Enable. */
uint32_t isp82xx_no_md_cap:1;
uint32_t host_shutting_down:1;
uint32_t idc_compl_status:1;
-
uint32_t mr_reset_hdlr_active:1;
uint32_t mr_intr_valid:1;
+
uint32_t fawwpn_enabled:1;
- /* 35 bits */
+ uint32_t exlogins_enabled:1;
+ /* 34 bits */
} flags;
/* This spinlock is used to protect "io transactions", you must
void *async_pd;
dma_addr_t async_pd_dma;
+#define ENABLE_EXTENDED_LOGIN BIT_7
+
+ /* Extended Logins */
+ void *exlogin_buf;
+ dma_addr_t exlogin_buf_dma;
+ int exlogin_size;
+
void *swl;
/* These are used by mailbox operations. */
extern uint64_t ql2xmaxlun;
extern int ql2xmdcapmask;
extern int ql2xmdenable;
+extern int ql2xexlogins;
extern int qla2x00_loop_reset(scsi_qla_host_t *);
extern void qla2x00_abort_all_cmds(scsi_qla_host_t *, int);
uint16_t *);
extern int qla2x00_post_async_adisc_done_work(struct scsi_qla_host *,
fc_port_t *, uint16_t *);
+extern int qla2x00_set_exlogins_buffer(struct scsi_qla_host *);
+extern void qla2x00_free_exlogin_buffer(struct qla_hw_data *);
extern int qla81xx_restart_mpi_firmware(scsi_qla_host_t *);
extern int qla8044_check_fw_alive(struct scsi_qla_host *);
extern void qlt_host_reset_handler(struct qla_hw_data *ha);
+extern int qla_get_exlogin_status(scsi_qla_host_t *, uint16_t *,
+ uint16_t *);
+extern int qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr);
+
#endif /* _QLA_GBL_H */
ql_dbg(ql_dbg_init, vha, 0x00ca,
"Starting firmware.\n");
+ if (ql2xexlogins)
+ ha->flags.exlogins_enabled = 1;
+
rval = qla2x00_execute_fw(vha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS) {
+ rval = qla2x00_set_exlogins_buffer(vha);
+ if (rval != QLA_SUCCESS)
+ goto failed;
+
enable_82xx_npiv:
fw_major_version = ha->fw_major_version;
if (IS_P3P_TYPE(ha))
EXTENDED_BB_CREDITS);
} else
mcp->mb[4] = 0;
+
+ if (ha->flags.exlogins_enabled)
+ mcp->mb[4] |= ENABLE_EXTENDED_LOGIN;
+
mcp->out_mb |= MBX_4|MBX_3|MBX_2|MBX_1;
mcp->in_mb |= MBX_1;
} else {
return rval;
}
+/*
+ * qla_get_exlogin_status
+ * Get extended login status
+ * uses the memory offload control/status Mailbox
+ *
+ * Input:
+ * ha: adapter state pointer.
+ * fwopt: firmware options
+ *
+ * Returns:
+ * qla2x00 local function status
+ *
+ * Context:
+ * Kernel context.
+ */
+#define FETCH_XLOGINS_STAT 0x8
+int
+qla_get_exlogin_status(scsi_qla_host_t *vha, uint16_t *buf_sz,
+ uint16_t *ex_logins_cnt)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118f,
+ "Entered %s\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_MEM_OFFLOAD_CNTRL_STAT;
+ mcp->mb[1] = FETCH_XLOGINS_STAT;
+ mcp->out_mb = MBX_1|MBX_0;
+ mcp->in_mb = MBX_10|MBX_4|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ ql_dbg(ql_dbg_mbx, vha, 0x1115, "Failed=%x.\n", rval);
+ } else {
+ *buf_sz = mcp->mb[4];
+ *ex_logins_cnt = mcp->mb[10];
+
+ ql_log(ql_log_info, vha, 0x1190,
+ "buffer size 0x%x, exchange login count=%d\n",
+ mcp->mb[4], mcp->mb[10]);
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1116,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
+/*
+ * qla_set_exlogin_mem_cfg
+ * set extended login memory configuration
+ * Mbx needs to be issues before init_cb is set
+ *
+ * Input:
+ * ha: adapter state pointer.
+ * buffer: buffer pointer
+ * phys_addr: physical address of buffer
+ * size: size of buffer
+ * TARGET_QUEUE_LOCK must be released
+ * ADAPTER_STATE_LOCK must be release
+ *
+ * Returns:
+ * qla2x00 local funxtion status code.
+ *
+ * Context:
+ * Kernel context.
+ */
+#define CONFIG_XLOGINS_MEM 0x3
+int
+qla_set_exlogin_mem_cfg(scsi_qla_host_t *vha, dma_addr_t phys_addr)
+{
+ int rval;
+ mbx_cmd_t mc;
+ mbx_cmd_t *mcp = &mc;
+ struct qla_hw_data *ha = vha->hw;
+ int configured_count;
+
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x111a,
+ "Entered %s.\n", __func__);
+
+ memset(mcp->mb, 0 , sizeof(mcp->mb));
+ mcp->mb[0] = MBC_GET_MEM_OFFLOAD_CNTRL_STAT;
+ mcp->mb[1] = CONFIG_XLOGINS_MEM;
+ mcp->mb[2] = MSW(phys_addr);
+ mcp->mb[3] = LSW(phys_addr);
+ mcp->mb[6] = MSW(MSD(phys_addr));
+ mcp->mb[7] = LSW(MSD(phys_addr));
+ mcp->mb[8] = MSW(ha->exlogin_size);
+ mcp->mb[9] = LSW(ha->exlogin_size);
+ mcp->out_mb = MBX_9|MBX_8|MBX_7|MBX_6|MBX_3|MBX_2|MBX_1|MBX_0;
+ mcp->in_mb = MBX_11|MBX_0;
+ mcp->tov = MBX_TOV_SECONDS;
+ mcp->flags = 0;
+ rval = qla2x00_mailbox_command(vha, mcp);
+ if (rval != QLA_SUCCESS) {
+ /*EMPTY*/
+ ql_dbg(ql_dbg_mbx, vha, 0x111b, "Failed=%x.\n", rval);
+ } else {
+ configured_count = mcp->mb[11];
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118c,
+ "Done %s.\n", __func__);
+ }
+
+ return rval;
+}
+
/*
* qla2x00_get_fw_version
* Get firmware version.
ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x112f,
"%s: Ext_FwAttributes Upper: 0x%x, Lower: 0x%x.\n",
__func__, mcp->mb[17], mcp->mb[16]);
+ if (ha->fw_attributes_h & 0x4)
+ ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x118d,
+ "%s: Firmware supports Extended Login 0x%x\n",
+ __func__, ha->fw_attributes_h);
}
if (IS_QLA27XX(ha)) {
"0 - MiniDump disabled. "
"1 (Default) - MiniDump enabled.");
+int ql2xexlogins = 0;
+module_param(ql2xexlogins, uint, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(ql2xexlogins,
+ "Number of extended Logins. "
+ "0 (Default)- Disabled.");
+
/*
* SCSI host template entry points
*/
base_vha->flags.online = 0;
+ /* free DMA memory */
+ if (ha->exlogin_buf)
+ qla2x00_free_exlogin_buffer(ha);
+
qla2x00_destroy_deferred_work(ha);
qlt_remove_target(ha, base_vha);
return -ENOMEM;
}
+int
+qla2x00_set_exlogins_buffer(scsi_qla_host_t *vha)
+{
+ int rval;
+ uint16_t size, max_cnt, temp;
+ struct qla_hw_data *ha = vha->hw;
+
+ /* Return if we don't need to alloacate any extended logins */
+ if (!ql2xexlogins)
+ return QLA_SUCCESS;
+
+ ql_log(ql_log_info, vha, 0xd021, "EXLOGIN count: %d.\n", ql2xexlogins);
+ max_cnt = 0;
+ rval = qla_get_exlogin_status(vha, &size, &max_cnt);
+ if (rval != QLA_SUCCESS) {
+ ql_log_pci(ql_log_fatal, ha->pdev, 0xd029,
+ "Failed to get exlogin status.\n");
+ return rval;
+ }
+
+ temp = (ql2xexlogins > max_cnt) ? max_cnt : ql2xexlogins;
+ ha->exlogin_size = (size * temp);
+ ql_log(ql_log_info, vha, 0xd024,
+ "EXLOGIN: max_logins=%d, portdb=0x%x, total=%d.\n",
+ max_cnt, size, temp);
+
+ ql_log(ql_log_info, vha, 0xd025, "EXLOGIN: requested size=0x%x\n",
+ ha->exlogin_size);
+
+ /* Get consistent memory for extended logins */
+ ha->exlogin_buf = dma_alloc_coherent(&ha->pdev->dev,
+ ha->exlogin_size, &ha->exlogin_buf_dma, GFP_KERNEL);
+ if (!ha->exlogin_buf) {
+ ql_log_pci(ql_log_fatal, ha->pdev, 0xd02a,
+ "Failed to allocate memory for exlogin_buf_dma.\n");
+ return -ENOMEM;
+ }
+
+ /* Now configure the dma buffer */
+ rval = qla_set_exlogin_mem_cfg(vha, ha->exlogin_buf_dma);
+ if (rval) {
+ ql_log(ql_log_fatal, vha, 0x00cf,
+ "Setup extended login buffer ****FAILED****.\n");
+ qla2x00_free_exlogin_buffer(ha);
+ }
+
+ return rval;
+}
+
+/*
+* qla2x00_free_exlogin_buffer
+*
+* Input:
+* ha = adapter block pointer
+*/
+void
+qla2x00_free_exlogin_buffer(struct qla_hw_data *ha)
+{
+ if (ha->exlogin_buf) {
+ dma_free_coherent(&ha->pdev->dev, ha->exlogin_size,
+ ha->exlogin_buf, ha->exlogin_buf_dma);
+ ha->exlogin_buf = NULL;
+ ha->exlogin_size = 0;
+ }
+}
+
/*
* qla2x00_free_fw_dump
* Frees fw dump stuff.
projects / cascardo / linux.git / commitdiff