usb: phy: Remove the phy-rcar-gen2-usb driver
authorGeert Uytterhoeven <geert+renesas@glider.be>
Tue, 28 Apr 2015 12:04:07 +0000 (14:04 +0200)
committerFelipe Balbi <balbi@ti.com>
Tue, 28 Apr 2015 16:49:19 +0000 (11:49 -0500)
The phy-rcar-gen2-usb driver, which supports legacy platform data only,
is no longer used since commit a483dcbfa21f919c ("ARM: shmobile: lager:
Remove legacy board support").

This driver was superseded by the DT-only phy-rcar-gen2 driver, which
was introduced in commit 1233f59f745b237d ("phy: Renesas R-Car Gen2 PHY
driver").

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Felipe Balbi <balbi@ti.com>
drivers/usb/phy/Kconfig
drivers/usb/phy/Makefile
drivers/usb/phy/phy-rcar-gen2-usb.c [deleted file]
include/linux/platform_data/usb-rcar-gen2-phy.h [deleted file]

index 811f331..173a5b5 100644 (file)
@@ -187,19 +187,6 @@ config USB_RCAR_PHY
          To compile this driver as a module, choose M here: the
          module will be called phy-rcar-usb.
 
-config USB_RCAR_GEN2_PHY
-       tristate "Renesas R-Car Gen2 USB PHY support"
-       depends on ARCH_R8A7790 || ARCH_R8A7791 || COMPILE_TEST
-       select USB_PHY
-       help
-         Say Y here to add support for the Renesas R-Car Gen2 USB PHY driver.
-         It is typically used to control internal USB PHY for USBHS,
-         and to configure shared USB channels 0 and 2.
-         This driver supports R8A7790 and R8A7791.
-
-         To compile this driver as a module, choose M here: the
-         module will be called phy-rcar-gen2-usb.
-
 config USB_ULPI
        bool "Generic ULPI Transceiver Driver"
        depends on ARM || ARM64
index 75f2bba..e36ab1d 100644 (file)
@@ -23,7 +23,6 @@ obj-$(CONFIG_USB_MSM_OTG)             += phy-msm-usb.o
 obj-$(CONFIG_USB_MV_OTG)               += phy-mv-usb.o
 obj-$(CONFIG_USB_MXS_PHY)              += phy-mxs-usb.o
 obj-$(CONFIG_USB_RCAR_PHY)             += phy-rcar-usb.o
-obj-$(CONFIG_USB_RCAR_GEN2_PHY)                += phy-rcar-gen2-usb.o
 obj-$(CONFIG_USB_ULPI)                 += phy-ulpi.o
 obj-$(CONFIG_USB_ULPI_VIEWPORT)                += phy-ulpi-viewport.o
 obj-$(CONFIG_KEYSTONE_USB_PHY)         += phy-keystone.o
diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c
deleted file mode 100644 (file)
index f81800b..0000000
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * Renesas R-Car Gen2 USB phy driver
- *
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clk.h>
-#include <linux/delay.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_data/usb-rcar-gen2-phy.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/usb/otg.h>
-
-struct rcar_gen2_usb_phy_priv {
-       struct usb_phy phy;
-       void __iomem *base;
-       struct clk *clk;
-       spinlock_t lock;
-       int usecount;
-       u32 ugctrl2;
-};
-
-#define usb_phy_to_priv(p) container_of(p, struct rcar_gen2_usb_phy_priv, phy)
-
-/* Low Power Status register */
-#define USBHS_LPSTS_REG                        0x02
-#define USBHS_LPSTS_SUSPM              (1 << 14)
-
-/* USB General control register */
-#define USBHS_UGCTRL_REG               0x80
-#define USBHS_UGCTRL_CONNECT           (1 << 2)
-#define USBHS_UGCTRL_PLLRESET          (1 << 0)
-
-/* USB General control register 2 */
-#define USBHS_UGCTRL2_REG              0x84
-#define USBHS_UGCTRL2_USB0_PCI         (1 << 4)
-#define USBHS_UGCTRL2_USB0_HS          (3 << 4)
-#define USBHS_UGCTRL2_USB2_PCI         (0 << 31)
-#define USBHS_UGCTRL2_USB2_SS          (1 << 31)
-
-/* USB General status register */
-#define USBHS_UGSTS_REG                        0x88
-#define USBHS_UGSTS_LOCK               (1 << 8)
-
-/* Enable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_enable(void __iomem *base)
-{
-       u32 val;
-       int i;
-
-       /* USBHS PHY power on */
-       val = ioread32(base + USBHS_UGCTRL_REG);
-       val &= ~USBHS_UGCTRL_PLLRESET;
-       iowrite32(val, base + USBHS_UGCTRL_REG);
-
-       val = ioread16(base + USBHS_LPSTS_REG);
-       val |= USBHS_LPSTS_SUSPM;
-       iowrite16(val, base + USBHS_LPSTS_REG);
-
-       for (i = 0; i < 20; i++) {
-               val = ioread32(base + USBHS_UGSTS_REG);
-               if ((val & USBHS_UGSTS_LOCK) == USBHS_UGSTS_LOCK) {
-                       val = ioread32(base + USBHS_UGCTRL_REG);
-                       val |= USBHS_UGCTRL_CONNECT;
-                       iowrite32(val, base + USBHS_UGCTRL_REG);
-                       return 0;
-               }
-               udelay(1);
-       }
-
-       /* Timed out waiting for the PLL lock */
-       return -ETIMEDOUT;
-}
-
-/* Disable USBHS internal phy */
-static int __rcar_gen2_usbhs_phy_disable(void __iomem *base)
-{
-       u32 val;
-
-       /* USBHS PHY power off */
-       val = ioread32(base + USBHS_UGCTRL_REG);
-       val &= ~USBHS_UGCTRL_CONNECT;
-       iowrite32(val, base + USBHS_UGCTRL_REG);
-
-       val = ioread16(base + USBHS_LPSTS_REG);
-       val &= ~USBHS_LPSTS_SUSPM;
-       iowrite16(val, base + USBHS_LPSTS_REG);
-
-       val = ioread32(base + USBHS_UGCTRL_REG);
-       val |= USBHS_UGCTRL_PLLRESET;
-       iowrite32(val, base + USBHS_UGCTRL_REG);
-       return 0;
-}
-
-/* Setup USB channels */
-static void __rcar_gen2_usb_phy_init(struct rcar_gen2_usb_phy_priv *priv)
-{
-       u32 val;
-
-       clk_prepare_enable(priv->clk);
-
-       /* Set USB channels in the USBHS UGCTRL2 register */
-       val = ioread32(priv->base + USBHS_UGCTRL2_REG);
-       val &= ~(USBHS_UGCTRL2_USB0_HS | USBHS_UGCTRL2_USB2_SS);
-       val |= priv->ugctrl2;
-       iowrite32(val, priv->base + USBHS_UGCTRL2_REG);
-}
-
-/* Shutdown USB channels */
-static void __rcar_gen2_usb_phy_shutdown(struct rcar_gen2_usb_phy_priv *priv)
-{
-       __rcar_gen2_usbhs_phy_disable(priv->base);
-       clk_disable_unprepare(priv->clk);
-}
-
-static int rcar_gen2_usb_phy_set_suspend(struct usb_phy *phy, int suspend)
-{
-       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-       unsigned long flags;
-       int retval;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       retval = suspend ? __rcar_gen2_usbhs_phy_disable(priv->base) :
-                          __rcar_gen2_usbhs_phy_enable(priv->base);
-       spin_unlock_irqrestore(&priv->lock, flags);
-       return retval;
-}
-
-static int rcar_gen2_usb_phy_init(struct usb_phy *phy)
-{
-       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-       unsigned long flags;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       /*
-        * Enable the clock and setup USB channels
-        * if it's the first user
-        */
-       if (!priv->usecount++)
-               __rcar_gen2_usb_phy_init(priv);
-       spin_unlock_irqrestore(&priv->lock, flags);
-       return 0;
-}
-
-static void rcar_gen2_usb_phy_shutdown(struct usb_phy *phy)
-{
-       struct rcar_gen2_usb_phy_priv *priv = usb_phy_to_priv(phy);
-       unsigned long flags;
-
-       spin_lock_irqsave(&priv->lock, flags);
-       if (!priv->usecount) {
-               dev_warn(phy->dev, "Trying to disable phy with 0 usecount\n");
-               goto out;
-       }
-
-       /* Disable everything if it's the last user */
-       if (!--priv->usecount)
-               __rcar_gen2_usb_phy_shutdown(priv);
-out:
-       spin_unlock_irqrestore(&priv->lock, flags);
-}
-
-static int rcar_gen2_usb_phy_probe(struct platform_device *pdev)
-{
-       struct device *dev = &pdev->dev;
-       struct rcar_gen2_phy_platform_data *pdata;
-       struct rcar_gen2_usb_phy_priv *priv;
-       struct resource *res;
-       void __iomem *base;
-       struct clk *clk;
-       int retval;
-
-       pdata = dev_get_platdata(dev);
-       if (!pdata) {
-               dev_err(dev, "No platform data\n");
-               return -EINVAL;
-       }
-
-       clk = devm_clk_get(dev, "usbhs");
-       if (IS_ERR(clk)) {
-               dev_err(dev, "Can't get the clock\n");
-               return PTR_ERR(clk);
-       }
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       base = devm_ioremap_resource(dev, res);
-       if (IS_ERR(base))
-               return PTR_ERR(base);
-
-       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
-       if (!priv)
-               return -ENOMEM;
-
-       spin_lock_init(&priv->lock);
-       priv->clk = clk;
-       priv->base = base;
-       priv->ugctrl2 = pdata->chan0_pci ?
-                       USBHS_UGCTRL2_USB0_PCI : USBHS_UGCTRL2_USB0_HS;
-       priv->ugctrl2 |= pdata->chan2_pci ?
-                       USBHS_UGCTRL2_USB2_PCI : USBHS_UGCTRL2_USB2_SS;
-       priv->phy.dev = dev;
-       priv->phy.label = dev_name(dev);
-       priv->phy.init = rcar_gen2_usb_phy_init;
-       priv->phy.shutdown = rcar_gen2_usb_phy_shutdown;
-       priv->phy.set_suspend = rcar_gen2_usb_phy_set_suspend;
-
-       retval = usb_add_phy_dev(&priv->phy);
-       if (retval < 0) {
-               dev_err(dev, "Failed to add USB phy\n");
-               return retval;
-       }
-
-       platform_set_drvdata(pdev, priv);
-
-       return retval;
-}
-
-static int rcar_gen2_usb_phy_remove(struct platform_device *pdev)
-{
-       struct rcar_gen2_usb_phy_priv *priv = platform_get_drvdata(pdev);
-
-       usb_remove_phy(&priv->phy);
-
-       return 0;
-}
-
-static struct platform_driver rcar_gen2_usb_phy_driver = {
-       .driver = {
-               .name = "usb_phy_rcar_gen2",
-       },
-       .probe = rcar_gen2_usb_phy_probe,
-       .remove = rcar_gen2_usb_phy_remove,
-};
-
-module_platform_driver(rcar_gen2_usb_phy_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("Renesas R-Car Gen2 USB phy");
-MODULE_AUTHOR("Valentine Barshak <valentine.barshak@cogentembedded.com>");
diff --git a/include/linux/platform_data/usb-rcar-gen2-phy.h b/include/linux/platform_data/usb-rcar-gen2-phy.h
deleted file mode 100644 (file)
index dd3ba46..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
-/*
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __USB_RCAR_GEN2_PHY_H
-#define __USB_RCAR_GEN2_PHY_H
-
-#include <linux/types.h>
-
-struct rcar_gen2_phy_platform_data {
-       /* USB channel 0 configuration */
-       bool chan0_pci:1;       /* true: PCI USB host 0, false: USBHS */
-       /* USB channel 2 configuration */
-       bool chan2_pci:1;       /* true: PCI USB host 2, false: USBSS */
-};
-
-#endif