ARM: S3C64XX: Handle new Amrut modules on Cragganmore

These use a different GPIO for the jack polarity selection.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
index 15e0c13..a6c156d 100644 (file)
--- a/arch/arm/mach-s3c64xx/mach-crag6410-module.c
+++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c
@@ -187,12 +187,13 @@ static struct regulator_init_data wm8994_ldo2 = {
 
 static struct wm8994_pdata wm8994_pdata = {
        .gpio_base = CODEC_GPIO_BASE,
+       .micb2_delay = 150,
        .gpio_defaults = {
                0x3,          /* IRQ out, active high, CMOS */
        },
        .ldo = {
-                { .init_data = &wm8994_ldo1, },
-                { .init_data = &wm8994_ldo2, },
+                { .enable = S3C64XX_GPN(6), .init_data = &wm8994_ldo1, },
+                { .enable = S3C64XX_GPN(4), .init_data = &wm8994_ldo2, },
        },
 };
 
@@ -203,7 +204,7 @@ static const struct i2c_board_info wm1277_devs[] = {
        },
 };
 
-static struct arizona_pdata wm5102_pdata = {
+static struct arizona_pdata wm5102_reva_pdata = {
        .ldoena = S3C64XX_GPN(7),
        .gpio_base = CODEC_GPIO_BASE,
        .irq_active_high = true,
@@ -218,6 +219,31 @@ static struct s3c64xx_spi_csinfo wm5102_spi_csinfo = {
        .line = S3C64XX_GPN(5),
 };
 
+static struct spi_board_info wm5102_reva_spi_devs[] = {
+       [0] = {
+               .modalias       = "wm5102",
+               .max_speed_hz   = 10 * 1000 * 1000,
+               .bus_num        = 0,
+               .chip_select    = 1,
+               .mode           = SPI_MODE_0,
+               .irq            = GLENFARCLAS_PMIC_IRQ_BASE +
+                                 WM831X_IRQ_GPIO_2,
+               .controller_data = &wm5102_spi_csinfo,
+               .platform_data = &wm5102_reva_pdata,
+       },
+};
+
+static struct arizona_pdata wm5102_pdata = {
+       .ldoena = S3C64XX_GPN(7),
+       .gpio_base = CODEC_GPIO_BASE,
+       .irq_active_high = true,
+       .micd_pol_gpio = CODEC_GPIO_BASE + 2,
+       .gpio_defaults = {
+               [2] = 0x10000, /* AIF3TXLRCLK */
+               [3] = 0x4,     /* OPCLK */
+       },
+};
+
 static struct spi_board_info wm5102_spi_devs[] = {
        [0] = {
                .modalias       = "wm5102",
@@ -278,6 +304,9 @@ static __devinitdata const struct {
        { .id = 0x3c, .rev = 0xff, .name = "1273-EV1 Longmorn" },
        { .id = 0x3d, .rev = 0xff, .name = "1277-EV1 Littlemill",
          .i2c_devs = wm1277_devs, .num_i2c_devs = ARRAY_SIZE(wm1277_devs) },
+       { .id = 0x3e, .rev = 0, .name = "WM5102-6271-EV1-CS127 Amrut",
+         .spi_devs = wm5102_reva_spi_devs,
+         .num_spi_devs = ARRAY_SIZE(wm5102_reva_spi_devs) },
        { .id = 0x3e, .rev = -1, .name = "WM5102-6271-EV1-CS127 Amrut",
          .spi_devs = wm5102_spi_devs,
          .num_spi_devs = ARRAY_SIZE(wm5102_spi_devs) },