clk: samsung: pll: Add support for rate configuration of PLL45xx

This patch implements round_rate and set_rate callbacks of PLL45xx
driver to allow reconfiguration of PLL at runtime.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mike Turquette <mturquette@linaro.org>

diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
index f2e92e8..4acd061 100644 (file)
--- a/drivers/clk/samsung/clk-pll.c
+++ b/drivers/clk/samsung/clk-pll.c
@@ -10,9 +10,12 @@
 */
 
 #include <linux/errno.h>
+#include <linux/hrtimer.h>
 #include "clk.h"
 #include "clk-pll.h"
 
+#define PLL_TIMEOUT_MS         10
+
 struct samsung_clk_pll {
        struct clk_hw           hw;
        void __iomem            *lock_reg;
@@ -272,13 +275,20 @@ static const struct clk_ops samsung_pll36xx_clk_min_ops = {
 /*
  * PLL45xx Clock Type
  */
+#define PLL4502_LOCK_FACTOR    400
+#define PLL4508_LOCK_FACTOR    240
 
 #define PLL45XX_MDIV_MASK      (0x3FF)
 #define PLL45XX_PDIV_MASK      (0x3F)
 #define PLL45XX_SDIV_MASK      (0x7)
+#define PLL45XX_AFC_MASK       (0x1F)
 #define PLL45XX_MDIV_SHIFT     (16)
 #define PLL45XX_PDIV_SHIFT     (8)
 #define PLL45XX_SDIV_SHIFT     (0)
+#define PLL45XX_AFC_SHIFT      (0)
+
+#define PLL45XX_ENABLE         BIT(31)
+#define PLL45XX_LOCKED         BIT(29)
 
 static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
                                unsigned long parent_rate)
@@ -301,8 +311,101 @@ static unsigned long samsung_pll45xx_recalc_rate(struct clk_hw *hw,
        return (unsigned long)fvco;
 }
 
+static bool samsung_pll45xx_mp_change(u32 pll_con0, u32 pll_con1,
+                               const struct samsung_pll_rate_table *rate)
+{
+       u32 old_mdiv, old_pdiv, old_afc;
+
+       old_mdiv = (pll_con0 >> PLL45XX_MDIV_SHIFT) & PLL45XX_MDIV_MASK;
+       old_pdiv = (pll_con0 >> PLL45XX_PDIV_SHIFT) & PLL45XX_PDIV_MASK;
+       old_afc = (pll_con1 >> PLL45XX_AFC_SHIFT) & PLL45XX_AFC_MASK;
+
+       return (old_mdiv != rate->mdiv || old_pdiv != rate->pdiv
+               || old_afc != rate->afc);
+}
+
+static int samsung_pll45xx_set_rate(struct clk_hw *hw, unsigned long drate,
+                                       unsigned long prate)
+{
+       struct samsung_clk_pll *pll = to_clk_pll(hw);
+       const struct samsung_pll_rate_table *rate;
+       u32 con0, con1;
+       ktime_t start;
+
+       /* Get required rate settings from table */
+       rate = samsung_get_pll_settings(pll, drate);
+       if (!rate) {
+               pr_err("%s: Invalid rate : %lu for pll clk %s\n", __func__,
+                       drate, __clk_get_name(hw->clk));
+               return -EINVAL;
+       }
+
+       con0 = __raw_readl(pll->con_reg);
+       con1 = __raw_readl(pll->con_reg + 0x4);
+
+       if (!(samsung_pll45xx_mp_change(con0, con1, rate))) {
+               /* If only s change, change just s value only*/
+               con0 &= ~(PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT);
+               con0 |= rate->sdiv << PLL45XX_SDIV_SHIFT;
+               __raw_writel(con0, pll->con_reg);
+
+               return 0;
+       }
+
+       /* Set PLL PMS values. */
+       con0 &= ~((PLL45XX_MDIV_MASK << PLL45XX_MDIV_SHIFT) |
+                       (PLL45XX_PDIV_MASK << PLL45XX_PDIV_SHIFT) |
+                       (PLL45XX_SDIV_MASK << PLL45XX_SDIV_SHIFT));
+       con0 |= (rate->mdiv << PLL45XX_MDIV_SHIFT) |
+                       (rate->pdiv << PLL45XX_PDIV_SHIFT) |
+                       (rate->sdiv << PLL45XX_SDIV_SHIFT);
+
+       /* Set PLL AFC value. */
+       con1 = __raw_readl(pll->con_reg + 0x4);
+       con1 &= ~(PLL45XX_AFC_MASK << PLL45XX_AFC_SHIFT);
+       con1 |= (rate->afc << PLL45XX_AFC_SHIFT);
+
+       /* Set PLL lock time. */
+       switch (pll->type) {
+       case pll_4502:
+               __raw_writel(rate->pdiv * PLL4502_LOCK_FACTOR, pll->lock_reg);
+               break;
+       case pll_4508:
+               __raw_writel(rate->pdiv * PLL4508_LOCK_FACTOR, pll->lock_reg);
+               break;
+       default:
+               break;
+       };
+
+       /* Set new configuration. */
+       __raw_writel(con1, pll->con_reg + 0x4);
+       __raw_writel(con0, pll->con_reg);
+
+       /* Wait for locking. */
+       start = ktime_get();
+       while (!(__raw_readl(pll->con_reg) & PLL45XX_LOCKED)) {
+               ktime_t delta = ktime_sub(ktime_get(), start);
+
+               if (ktime_to_ms(delta) > PLL_TIMEOUT_MS) {
+                       pr_err("%s: could not lock PLL %s\n",
+                                       __func__, __clk_get_name(hw->clk));
+                       return -EFAULT;
+               }
+
+               cpu_relax();
+       }
+
+       return 0;
+}
+
 static const struct clk_ops samsung_pll45xx_clk_ops = {
        .recalc_rate = samsung_pll45xx_recalc_rate,
+       .round_rate = samsung_pll_round_rate,
+       .set_rate = samsung_pll45xx_set_rate,
+};
+
+static const struct clk_ops samsung_pll45xx_clk_min_ops = {
+       .recalc_rate = samsung_pll45xx_recalc_rate,
 };
 
 /*
@@ -591,9 +694,14 @@ static void __init _samsung_clk_register_pll(struct samsung_pll_clock *pll_clk,
                        init.ops = &samsung_pll35xx_clk_ops;
                break;
        case pll_4500:
+               init.ops = &samsung_pll45xx_clk_min_ops;
+               break;
        case pll_4502:
        case pll_4508:
-               init.ops = &samsung_pll45xx_clk_ops;
+               if (!pll->rate_table)
+                       init.ops = &samsung_pll45xx_clk_min_ops;
+               else
+                       init.ops = &samsung_pll45xx_clk_ops;
                break;
        /* clk_ops for 36xx and 2650 are similar */
        case pll_36xx:

diff --git a/drivers/clk/samsung/clk-pll.h b/drivers/clk/samsung/clk-pll.h
index fceb2cb..2c33129 100644 (file)
--- a/drivers/clk/samsung/clk-pll.h
+++ b/drivers/clk/samsung/clk-pll.h
@@ -41,6 +41,15 @@ enum samsung_pll_type {
                .kdiv   =       (_k),                           \
        }
 
+#define PLL_45XX_RATE(_rate, _m, _p, _s, _afc)                 \
+       {                                                       \
+               .rate   =       (_rate),                        \
+               .mdiv   =       (_m),                           \
+               .pdiv   =       (_p),                           \
+               .sdiv   =       (_s),                           \
+               .afc    =       (_afc),                         \
+       }
+
 /* NOTE: Rate table should be kept sorted in descending order. */
 
 struct samsung_pll_rate_table {
@@ -49,6 +58,7 @@ struct samsung_pll_rate_table {
        unsigned int mdiv;
        unsigned int sdiv;
        unsigned int kdiv;
+       unsigned int afc;
 };
 
 enum pll46xx_type {