rtl8xxxu: REG_LDOA15_CTRL is only used on gen1 parts

Move setting it to rtl8723au_init_phy_bb()

Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
index baa53a1..4ef8a05 100644 (file)
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c
@@ -3719,7 +3719,7 @@ static int rtl8xxxu_init_phy_regs(struct rtl8xxxu_priv *priv,
 
 static void rtl8723au_init_phy_bb(struct rtl8xxxu_priv *priv)
 {
-       u8 val8;
+       u8 val8, ldoa15, ldov12d, lpldo, ldohci12;
        u16 val16;
        u32 val32;
 
@@ -3761,6 +3761,13 @@ static void rtl8723au_init_phy_bb(struct rtl8xxxu_priv *priv)
                rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_highpa_table);
        else
                rtl8xxxu_init_phy_regs(priv, rtl8xxx_agc_standard_table);
+
+       ldoa15 = LDOA15_ENABLE | LDOA15_OBUF;
+       ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT);
+       ldohci12 = 0x57;
+       lpldo = 1;
+       val32 = (lpldo << 24) | (ldohci12 << 16) | (ldov12d << 8) | ldoa15;
+       rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32);
 }
 
 static void rtl8723bu_init_phy_bb(struct rtl8xxxu_priv *priv)
@@ -3818,7 +3825,7 @@ static void rtl8192eu_init_phy_bb(struct rtl8xxxu_priv *priv)
  */
 static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
 {
-       u8 val8, ldoa15, ldov12d, lpldo, ldohci12;
+       u8 val8;
        u32 val32;
 
        priv->fops->init_phy_bb(priv);
@@ -3893,17 +3900,6 @@ static int rtl8xxxu_init_phy_bb(struct rtl8xxxu_priv *priv)
                rtl8xxxu_write32(priv, REG_MAC_PHY_CTRL, val32);
        }
 
-       if (priv->rtl_chip != RTL8723B && priv->rtl_chip != RTL8192E) {
-               ldoa15 = LDOA15_ENABLE | LDOA15_OBUF;
-               ldov12d = LDOV12D_ENABLE | BIT(2) | (2 << LDOV12D_VADJ_SHIFT);
-               ldohci12 = 0x57;
-               lpldo = 1;
-               val32 = (lpldo << 24) | (ldohci12 << 16) |
-                       (ldov12d << 8) | ldoa15;
-
-               rtl8xxxu_write32(priv, REG_LDOA15_CTRL, val32);
-       }
-
        if (priv->rtl_chip == RTL8192E)
                rtl8xxxu_write32(priv, REG_AFE_XTAL_CTRL, 0x000f81fb);